Any chance that you changed the name of your table view from "tableView" to "myTableView" at some point?
C# / Xamarin:
segment.SetTitleTextAttributes(new UITextAttributes {
Font = UIFont.SystemFontOfSize(font_size) }, UIControlState.Normal);
Change button image or image view tint color Swift :
btn.imageView?.image = btn.imageView?.image?.withRenderingMode(.alwaysTemplate)
btn.imageView?.tintColor = #colorLiteral(red: 0, green: 0, blue: 0, alpha: 1)
self.tableView.tableHeaderView = segmentedControl;
If you want it to obey your width and height properly though enclose your segmentedControl in a UIView first as the tableView likes to mangle your view a bit to fit the width.
In my case I have succeed with the following solution for converting field ClockInTime from ClockTime collection from string to Date type:
db.ClockTime.find().forEach(function(doc) {
doc.ClockInTime=new Date(doc.ClockInTime);
db.ClockTime.save(doc);
})
replace required
by required="required"
You want the :checkbox:checked
selector and map
to create an array of the values:
var checkedValues = $('input:checkbox:checked').map(function() {
return this.value;
}).get();
If your checkboxes have a shared class it would be faster to use that instead, eg. $('.mycheckboxes:checked')
, or for a common name $('input[name="Foo"]:checked')
- Update -
If you don't need IE support then you can now make the map()
call more succinct by using an arrow function:
var checkedValues = $('input:checkbox:checked').map((i, el) => el.value).get();
require(ggplot2)
require(nlme)
set.seed(101)
mp <-data.frame(year=1990:2010)
N <- nrow(mp)
mp <- within(mp,
{
wav <- rnorm(N)*cos(2*pi*year)+rnorm(N)*sin(2*pi*year)+5
wow <- rnorm(N)*wav+rnorm(N)*wav^3
})
m01 <- gls(wow~poly(wav,3), data=mp, correlation = corARMA(p=1))
Get fitted values (the same as m01$fitted
)
fit <- predict(m01)
Normally we could use something like predict(...,se.fit=TRUE)
to get the confidence intervals on the prediction, but gls
doesn't provide this capability. We use a recipe similar to the one shown at http://glmm.wikidot.com/faq :
V <- vcov(m01)
X <- model.matrix(~poly(wav,3),data=mp)
se.fit <- sqrt(diag(X %*% V %*% t(X)))
Put together a "prediction frame":
predframe <- with(mp,data.frame(year,wav,
wow=fit,lwr=fit-1.96*se.fit,upr=fit+1.96*se.fit))
Now plot with geom_ribbon
(p1 <- ggplot(mp, aes(year, wow))+
geom_point()+
geom_line(data=predframe)+
geom_ribbon(data=predframe,aes(ymin=lwr,ymax=upr),alpha=0.3))
It's easier to see that we got the right answer if we plot against wav
rather than year
:
(p2 <- ggplot(mp, aes(wav, wow))+
geom_point()+
geom_line(data=predframe)+
geom_ribbon(data=predframe,aes(ymin=lwr,ymax=upr),alpha=0.3))
It would be nice to do the predictions with more resolution, but it's a little tricky to do this with the results of poly()
fits -- see ?makepredictcall
.
Yes, it will always be the same. From the documentation
Appends the specified element to the end of this list. Parameters: e element to be appended to this list Returns: true (as specified by Collection.add(java.lang.Object))
ArrayList add()
implementation
public boolean More ...add(E e) {
ensureCapacity(size + 1); // Increments modCount!!
elementData[size++] = e;
return true;
}
sudo apt-get install mysql-client-core-5.5
An actual JSON request would look like this:
data: '{"command":"on"}',
Where you're sending an actual JSON string. For a more general solution, use JSON.stringify()
to serialize an object to JSON, like this:
data: JSON.stringify({ "command": "on" }),
To support older browsers that don't have the JSON
object, use json2.js which will add it in.
What's currently happening is since you have processData: false
, it's basically sending this: ({"command":"on"}).toString()
which is [object Object]
...what you see in your request.
I usually use sys.platform
(docs) to get the platform. sys.platform
will distinguish between linux, other unixes, and OS X, while os.name
is "posix
" for all of them.
For much more detailed information, use the platform module. This has cross-platform functions that will give you information on the machine architecture, OS and OS version, version of Python, etc. Also it has os-specific functions to get things like the particular linux distribution.
Try this:
View decorView = getWindow().getDecorView();
int uiOptions = View.SYSTEM_UI_FLAG_HIDE_NAVIGATION
| View.SYSTEM_UI_FLAG_FULLSCREEN;
decorView.setSystemUiVisibility(uiOptions);
I realize you've already accepted an answer for this, but I wrote this short howto article to install mongodb into the c:\wamp
directory and run it as a service. Here is the gist of it.
Create these directories
mkdir c:\wamp\bin\mongodb\mongodb-win32...2.x.x\data
mkdir c:\wamp\bin\mongodb\mongodb-win32...2.x.x\data\db
mkdir c:\wamp\bin\mongodb\mongodb-win32...2.x.x\logs
mkdir c:\wamp\bin\mongodb\mongodb-win32...2.x.x\conf
Download and extract win32 binaries into c:\wamp directory along side mysql, apache.
Create a mongo.conf file
c:\wamp\bin\mongodb\mongodb-win32…2.x.x\conf\mongodb.conf
# mongodb.conf
# data lives here
dbpath=C:\wamp\bin\mongodb\mongodb-win32...2.x.x\data\db
# where to log
logpath=C:\wamp\bin\mongodb\mongodb-win32...2.x.x\logs\mongodb.log
logappend=true
# only run on localhost for development
bind_ip = 127.0.0.1
port = 27017
rest = true
Install as a service
mongod.exe --install --config c:\wamp\bin\mongodb\mongodb-win32...2.x.x\conf\mongodb.conf --logpath c:\wamp\bin\mongodb\mongodb-win32...2.x.x\logs\mongodb.log
Set service to automatic and start it using services.msc
Add path to mongo.exe to your path
Need more details? Read the full article here...
If you don't mind operating only on initialized submodules, you can use git submodule foreach
to avoid text parsing.
git submodule foreach --quiet 'echo $name'
You need to change your code as below:-
<html>
<body>
<span id="span_Id">Click the button to display the content.</span>
<button onclick="displayDate()">Click Me</button>
<script>
function displayDate() {
var span_Text = document.getElementById("span_Id").innerText;
alert (span_Text);
}
</script>
</body>
</html>
After doing this you will get the tag value in alert.
The below only works if the iframe content is from the same parent domain.
The following jquery script works for me. Tested on Chrome and IE8. The inner iframe references a page that is on the same domain as the parent page.
In this particular case, I am hiding an element with a specific class in the inner iframe.
Basically, you just append a style
element to the head section of the document loaded in a frame:
frame.addEventListener("load", ev =>
const new_style_element = document.createElement("style");
new_style_element.textContent = ".my-class { display: none; }"
ev.target.contentDocument.head.appendChild(new_style_element);
});
You can also instead of style
use a link
element, for referencing a stylesheet resource.
DISCLAIMER: This answer was written in 2008.
Since then, PHP has given us
password_hash
andpassword_verify
and, since their introduction, they are the recommended password hashing & checking method.The theory of the answer is still a good read though.
\0
in it, which can seriously weaken security.)The objective behind hashing passwords is simple: preventing malicious access to user accounts by compromising the database. So the goal of password hashing is to deter a hacker or cracker by costing them too much time or money to calculate the plain-text passwords. And time/cost are the best deterrents in your arsenal.
Another reason that you want a good, robust hash on a user accounts is to give you enough time to change all the passwords in the system. If your database is compromised you will need enough time to at least lock the system down, if not change every password in the database.
Jeremiah Grossman, CTO of Whitehat Security, stated on White Hat Security blog after a recent password recovery that required brute-force breaking of his password protection:
Interestingly, in living out this nightmare, I learned A LOT I didn’t know about password cracking, storage, and complexity. I’ve come to appreciate why password storage is ever so much more important than password complexity. If you don’t know how your password is stored, then all you really can depend upon is complexity. This might be common knowledge to password and crypto pros, but for the average InfoSec or Web Security expert, I highly doubt it.
(Emphasis mine.)
Entropy. (Not that I fully subscribe to Randall's viewpoint.)
In short, entropy is how much variation is within the password. When a password is only lowercase roman letters, that's only 26 characters. That isn't much variation. Alpha-numeric passwords are better, with 36 characters. But allowing upper and lower case, with symbols, is roughly 96 characters. That's a lot better than just letters. One problem is, to make our passwords memorable we insert patterns—which reduces entropy. Oops!
Password entropy is approximated easily. Using the full range of ascii characters (roughly 96 typeable characters) yields an entropy of 6.6 per character, which at 8 characters for a password is still too low (52.679 bits of entropy) for future security. But the good news is: longer passwords, and passwords with unicode characters, really increase the entropy of a password and make it harder to crack.
There's a longer discussion of password entropy on the Crypto StackExchange site. A good Google search will also turn up a lot of results.
In the comments I talked with @popnoodles, who pointed out that enforcing a password policy of X length with X many letters, numbers, symbols, etc, can actually reduce entropy by making the password scheme more predictable. I do agree. Randomess, as truly random as possible, is always the safest but least memorable solution.
So far as I've been able to tell, making the world's best password is a Catch-22. Either its not memorable, too predictable, too short, too many unicode characters (hard to type on a Windows/Mobile device), too long, etc. No password is truly good enough for our purposes, so we must protect them as though they were in Fort Knox.
Bcrypt and scrypt are the current best practices. Scrypt will be better than bcrypt in time, but it hasn't seen adoption as a standard by Linux/Unix or by webservers, and hasn't had in-depth reviews of its algorithm posted yet. But still, the future of the algorithm does look promising. If you are working with Ruby there is an scrypt gem that will help you out, and Node.js now has its own scrypt package. You can use Scrypt in PHP either via the Scrypt extension or the Libsodium extension (both are available in PECL).
I highly suggest reading the documentation for the crypt function if you want to understand how to use bcrypt, or finding yourself a good wrapper or use something like PHPASS for a more legacy implementation. I recommend a minimum of 12 rounds of bcrypt, if not 15 to 18.
I changed my mind about using bcrypt when I learned that bcrypt only uses blowfish's key schedule, with a variable cost mechanism. The latter lets you increase the cost to brute-force a password by increasing blowfish's already expensive key schedule.
I almost can't imagine this situation anymore. PHPASS supports PHP 3.0.18 through 5.3, so it is usable on almost every installation imaginable—and should be used if you don't know for certain that your environment supports bcrypt.
But suppose that you cannot use bcrypt or PHPASS at all. What then?
Try an implementation of PDKBF2 with the maximum number of rounds that your environment/application/user-perception can tolerate. The lowest number I'd recommend is 2500 rounds. Also, make sure to use hash_hmac() if it is available to make the operation harder to reproduce.
Coming in PHP 5.5 is a full password protection library that abstracts away any pains of working with bcrypt. While most of us are stuck with PHP 5.2 and 5.3 in most common environments, especially shared hosts, @ircmaxell has built a compatibility layer for the coming API that is backward compatible to PHP 5.3.7.
The computational power required to actually crack a hashed password doesn't exist. The only way for computers to "crack" a password is to recreate it and simulate the hashing algorithm used to secure it. The speed of the hash is linearly related to its ability to be brute-forced. Worse still, most hash algorithms can be easily parallelized to perform even faster. This is why costly schemes like bcrypt and scrypt are so important.
You cannot possibly foresee all threats or avenues of attack, and so you must make your best effort to protect your users up front. If you do not, then you might even miss the fact that you were attacked until it's too late... and you're liable. To avoid that situation, act paranoid to begin with. Attack your own software (internally) and attempt to steal user credentials, or modify other user's accounts or access their data. If you don't test the security of your system, then you cannot blame anyone but yourself.
Lastly: I am not a cryptographer. Whatever I've said is my opinion, but I happen to think it's based on good ol' common sense ... and lots of reading. Remember, be as paranoid as possible, make things as hard to intrude as possible, and then, if you are still worried, contact a white-hat hacker or cryptographer to see what they say about your code/system.
Delete Id from table where Id in (select id from table)
If you are using Django >= 1.9 with Postgres you can make use of ArrayField advantages
A field for storing lists of data. Most field types can be used, you simply pass another field instance as the base_field. You may also specify a size. ArrayField can be nested to store multi-dimensional arrays.
It is also possible to nest array fields:
from django.contrib.postgres.fields import ArrayField
from django.db import models
class ChessBoard(models.Model):
board = ArrayField(
ArrayField(
models.CharField(max_length=10, blank=True),
size=8,
),
size=8,
)
As @thane-brimhall mentioned it is also possible to query elements directly. Documentation reference
Such steps helped me:
os.remove will only remove a single file.
In order to remove with wildcards, you'll need to write your own routine that handles this.
There are quite a few suggested approaches listed on this forum page.
public static boolean CheckIsDataAlreadyInDBorNot(String TableName,
String dbfield, String fieldValue) {
SQLiteDatabase sqldb = EGLifeStyleApplication.sqLiteDatabase;
String Query = "Select * from " + TableName + " where " + dbfield + " = " + fieldValue;
Cursor cursor = sqldb.rawQuery(Query, null);
if(cursor.getCount() <= 0){
cursor.close();
return false;
}
cursor.close();
return true;
}
I hope this is useful to you... This function returns true if record already exists in db. Otherwise returns false.
Addition to the accepted answer:
struct immutableint { immutableint(int i) : i_(i) {} const int& get() const { return i_; } private: int i_; };
I'd argue that this example is not okay and should be avoided if possible. Why? It is very easy to end-up with a dangling reference.
To illustrate the point with an example:
struct Foo
{
Foo(int i = 42) : boo_(i) {}
immutableint boo()
{
return boo_;
}
private:
immutableint boo_;
};
entering the danger-zone:
Foo foo;
const int& dangling = foo.boo().get(); // dangling reference!
In ConcurrentHashMap
, the lock is applied to a segment instead of an entire Map.
Each segment manages its own internal hash table. The lock is applied only for update operations. Collections.synchronizedMap(Map)
synchronizes the entire map.
Similar to hooblei's answer, just with interpolation:
<li ng-style="{'background-image': 'url({{ image.source }})'}">...</li>
In some ways, your question seems very legitimate, but I still might label it an XY problem
. I'm guessing the end result is that you want to display the sorted values in some way? As Bergi said in the comments, you can never quite rely on Javascript objects ( {i_am: "an_object"}
) to show their properties in any particular order.
For the displaying order, I might suggest you take each key of the object (ie, i_am
) and sort them into an ordered array. Then, use that array when retrieving elements of your object to display. Pseudocode:
var keys = [...]
var sortedKeys = [...]
for (var i = 0; i < sortedKeys.length; i++) {
var key = sortedKeys[i];
addObjectToTable(json[key]);
}
If it's just a true/false test, have your function return 0
for success, and return 1
for failure. The test would then be:
if function_name; then
do something
else
error condition
fi
IF (@@ROWCOUNT > 0)
BEGIN
SELECT my_table.my_col
FROM my_table
WHERE my_table.foo = 'bar'
END
List<string> items = new List<string>();
items.Find(p => p == "blah");
or
items.Find(p => p.Contains("b"));
but this allows you to define what you are looking for via a match predicate...
I guess if you are talking linqToSql then:
example looking for Account...
DataContext dc = new DataContext();
Account item = dc.Accounts.FirstOrDefault(p => p.id == 5);
If you need to make sure that there is only 1 item (throws exception when more than 1)
DataContext dc = new DataContext();
Account item = dc.Accounts.SingleOrDefault(p => p.id == 5);
Here is a video from Google Developers showing how to list all videos in a channel in v3
of the YouTube API.
There are two steps:
Query Channels to get the "uploads" Id. eg https://www.googleapis.com/youtube/v3/channels?id={channel Id}&key={API key}&part=contentDetails
Use this "uploads" Id to query PlaylistItems to get the list of videos. eg https://www.googleapis.com/youtube/v3/playlistItems?playlistId={"uploads" Id}&key={API key}&part=snippet&maxResults=50
Be aware that the path under src/main/resources must match the package path of your .class files wishing to access the resource. See my answer here.
a:active
: when you click on the link and hold it (active!).
a:visited
: when the link has already been visited.
If you want the link corresponding to the current page to be highlighted, you can define some specific style to the link -
.currentLink {
color: #640200;
background-color: #000000;
}
Add this new class only to the corresponding li
(link), either on server-side or on client-side (using JavaScript).
Take a look into NSColorWell class reference.
I found this problem in the latest Chrome as well as the latest Safari on the Mac OS X as of Mar 17, 2016. None of the fixes above worked for me, including assigning src to empty and then back to some site, or adding in some randomly-named "name" parameter, or adding in a random number on the end of the URL after the hash, or assigning the content window href to the src after assigning the src.
In my case, it was because I was using Javascript to update the IFRAME, and only switching the hash in the URL.
The workaround in my case was that I created an interim URL that had a 0 second meta redirect to that other page. It happens so fast that I hardly notice the screen flash. Plus, I made the background color of the interim page the same as the other page, and so you notice it even less.
This script works!
#/bin/bash
if [[ ( "$#" < 1 ) || ( !( "$1" == 1 ) && !( "$1" == 0 ) ) ]] ; then
echo this script requires a 1 or 0 as first parameter.
else
echo "first parameter is $1"
xinput set-prop 12 "Device Enabled" $0
fi
But this also works, and in addition keeps the logic of the OP, since the question is about calculations. Here it is with only arithmetic expressions:
#/bin/bash
if (( $# )) && (( $1 == 0 || $1 == 1 )); then
echo "first parameter is $1"
xinput set-prop 12 "Device Enabled" $0
else
echo this script requires a 1 or 0 as first parameter.
fi
The output is the same1:
$ ./tmp.sh
this script requires a 1 or 0 as first parameter.
$ ./tmp.sh 0
first parameter is 0
$ ./tmp.sh 1
first parameter is 1
$ ./tmp.sh 2
this script requires a 1 or 0 as first parameter.
[1] the second fails if the first argument is a string
It is difficult to say how the memory allocation will affect your speed. It depends on the garbage collection algorithm the JVM is using. For example if your garbage collector needs to pause to do a full collection, then if you have 10 more memory than you really need then the collector will have 10 more garbage to clean up.
If you are using java 6 you can use the jconsole (in the bin directory of the jdk) to attach to your process and watch how the collector is behaving. In general the collectors are very smart and you won't need to do any tuning, but if you have a need there are numerous options you have use to further tune the collection process.
If you are only looking to point to a different location for you identity file, the you can modify your ~/.ssh/config file with the following entry:
IdentityFile ~/.foo/identity
man ssh_config
to find other config options.
For many S3 API packages (I recently had this problem the npm s3 package) you can run into issues where the region is assumed to be US Standard, and lookup by name will require you to explicitly define the region if you choose to host a bucket outside of that region.
package
will add packaged jar
or war
to your target
folder, We can check it when, we empty the target folder (using mvn clean
) and then run mvn package
.
install
will do all the things that package
does, additionally it will add packaged jar
or war
in local repository as well. We can confirm it by checking in your .m2
folder.
//Scroll item pos
linearLayoutManager.scrollToPositionWithOffset(pos, 0);
Just thought I added my own solution here since I haven't seen it anywhere. It's a small and portable C++ templated function and portable that only uses bit operations.
template<typename T> inline static T swapByteOrder(const T& val) {
int totalBytes = sizeof(val);
T swapped = (T) 0;
for (int i = 0; i < totalBytes; ++i) {
swapped |= (val >> (8*(totalBytes-i-1)) & 0xFF) << (8*i);
}
return swapped;
}
toggleClass works too:
$(window).on("scroll", function() {
$("nav").toggleClass("shrink", $(this).scrollTop() > 50)
});
From Charles' instructions, after testing my proposed understanding would be as follows:
# For the next commit
$ git add . # Add only files created/modified to the index and not those deleted
$ git add -u # Add only files deleted/modified to the index and not those created
$ git add -A # Do both operations at once, add to all files to the index
This blog post might also be helpful to understand in what situation those commands may be applied: Removing Deleted Files from your Git Working Directory.
Sounds to me like at least one of those tables has defined UserID
as a uniqueidentifier
, not an int
. Did you check the data in each table? What does SELECT TOP 1 UserID FROM
each table yield? An int
or a GUID
?
EDIT
I think you have built a procedure based on all tables that contain a column named UserID. I think you should not have included the aspnet_Membership
table in your script, since it's not really one of "your" tables.
If you meant to design your tables around the aspnet_Membership
database, then why are the rest of the columns int
when that table clearly uses a uniqueidentifier
for the UserID
column?
If you use Spring Boot 2.0.0 use:
server.servlet.context-path
I think my answer will be more technical, but not different as the others present the same thing using different techniques.
So, first things first, the solution to this problem is the use of a design pattern known as "observer", it let's you decouple your data from your presentation, making the change in one thing be broadcasted to their listeners, but in this case it's made two-way.
To bind the data from the DOM to the js object you may add markup in the form of data
attributes (or classes if you need compatibility), like this:
<input type="text" data-object="a" data-property="b" id="b" class="bind" value=""/>
<input type="text" data-object="a" data-property="c" id="c" class="bind" value=""/>
<input type="text" data-object="d" data-property="e" id="e" class="bind" value=""/>
This way it can be accessed via js using querySelectorAll
(or the old friend getElementsByClassName
for compatibility).
Now you can bind the event listening to the changes in to ways: one listener per object or one big listener to the container/document. Binding to the document/container will trigger the event for every change made in it or it's child, it willhave a smaller memory footprint but will spawn event calls.
The code will look something like this:
//Bind to each element
var elements = document.querySelectorAll('input[data-property]');
function toJS(){
//Assuming `a` is in scope of the document
var obj = document[this.data.object];
obj[this.data.property] = this.value;
}
elements.forEach(function(el){
el.addEventListener('change', toJS, false);
}
//Bind to document
function toJS2(){
if (this.data && this.data.object) {
//Again, assuming `a` is in document's scope
var obj = document[this.data.object];
obj[this.data.property] = this.value;
}
}
document.addEventListener('change', toJS2, false);
You will need two things: one meta-object that will hold the references of witch DOM element is binded to each js object/attribute and a way to listen to changes in objects. It is basically the same way: you have to have a way to listen to changes in the object and then bind it to the DOM node, as your object "can't have" metadata you will need another object that holds metadata in a way that the property name maps to the metadata object's properties. The code will be something like this:
var a = {
b: 'foo',
c: 'bar'
},
d = {
e: 'baz'
},
metadata = {
b: 'b',
c: 'c',
e: 'e'
};
function toDOM(changes){
//changes is an array of objects changed and what happened
//for now i'd recommend a polyfill as this syntax is still a proposal
changes.forEach(function(change){
var element = document.getElementById(metadata[change.name]);
element.value = change.object[change.name];
});
}
//Side note: you can also use currying to fix the second argument of the function (the toDOM method)
Object.observe(a, toDOM);
Object.observe(d, toDOM);
I hope that i was of help.
This is an update to this rather old question. I wanted to use the new SF Pro fonts on a website and found no fonts CDN, besides the above noted (applesocial.s3.amazonaws.com).
Clearly, this isn't an official content repository approved by Apple. Actually, I did not find ANY official fonts repository serving Apple fonts, ready to be used by web developers.
And there's a reason - if you read the license agreement that comes with downloading the new SF Pro and other fonts from https://developer.apple.com/fonts/ - it states in the first few paragraphs very clearly:
[...]you may use the Apple Font solely for creating mock-ups of user interfaces to be used in software products running on Apple’s iOS, macOS or tvOS operating systems, as applicable. The foregoing right includes the right to show the Apple Font in screen shots, images, mock-ups or other depictions, digital and/or print, of such software products running solely on iOS, macOS or tvOS.[...]
And:
Except as expressly provided for herein, you may not use the Apple Font to, create, develop, display or otherwise distribute any documentation, artwork, website content or any other work product.
Further:
Except as otherwise expressly permitted [...] (i) only one user may use the Apple Font at a time, and (ii) you may not make the Apple Font available over a network where it could be run or used by multiple computers at the same time.
No more questions for me. Apple clearly does not want their Fonts shared across the web outside their products.
A 24 hour clock:
setInterval(function(){
var currentTime = new Date();
var hours = currentTime.getHours();
var minutes = currentTime.getMinutes();
var seconds = currentTime.getSeconds();
// Add leading zeros
minutes = (minutes < 10 ? "0" : "") + minutes;
seconds = (seconds < 10 ? "0" : "") + seconds;
hours = (hours < 10 ? "0" : "") + hours;
// Compose the string for display
var currentTimeString = hours + ":" + minutes + ":" + seconds;
$(".clock").html(currentTimeString);
},1000);
// 24 hour clock _x000D_
setInterval(function() {_x000D_
_x000D_
var currentTime = new Date();_x000D_
var hours = currentTime.getHours();_x000D_
var minutes = currentTime.getMinutes();_x000D_
var seconds = currentTime.getSeconds();_x000D_
_x000D_
// Add leading zeros_x000D_
hours = (hours < 10 ? "0" : "") + hours;_x000D_
minutes = (minutes < 10 ? "0" : "") + minutes;_x000D_
seconds = (seconds < 10 ? "0" : "") + seconds;_x000D_
_x000D_
// Compose the string for display_x000D_
var currentTimeString = hours + ":" + minutes + ":" + seconds;_x000D_
$(".clock").html(currentTimeString);_x000D_
_x000D_
}, 1000);
_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<div class="clock"></div>
_x000D_
The Response
API consumes a (immutable) Blob
from which the data can be retrieved in several ways. The OP only asked for ArrayBuffer
, and here's a demonstration of it.
var blob = GetABlobSomehow();
// NOTE: you will need to wrap this up in a async block first.
/* Use the await keyword to wait for the Promise to resolve */
await new Response(blob).arrayBuffer(); //=> <ArrayBuffer>
alternatively you could use this:
new Response(blob).arrayBuffer()
.then(/* <function> */);
Note: This API isn't compatible with older (ancient) browsers so take a look to the Browser Compatibility Table to be on the safe side ;)
the thing that work for me was to set /etc/hosts to point the hostname to the ip and not to the loopback interface and than restart my application.
cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.0.1 myservername
This is my configuration:
-Dcom.sun.management.jmxremote.port=1617
-Dcom.sun.management.jmxremote.ssl=false
-Dcom.sun.management.jmxremote.authenticate=false
You could try to use the following function
def tableIt(data):
for lin in data:
print("+---"*len(lin)+"+")
for inlin in lin:
print("|",str(inlin),"", end="")
print("|")
print("+---"*len(lin)+"+")
data = [[1,2,3,2,3],[1,2,3,2,3],[1,2,3,2,3],[1,2,3,2,3]]
tableIt(data)
window.location.href
returns the location of the current page.
top.location.href
(which is an alias of window.top.location.href
) returns the location of the topmost window in the window hierarchy. If a window has no parent, top
is a reference to itself (in other words, window
=== window.top
).
top
is useful both when you're dealing with frames and when dealing with windows which have been opened by other pages. For example, if you have a page called test.html
with the following script:
var newWin=window.open('about:blank','test','width=100,height=100');
newWin.document.write('<script>alert(top.location.href);</script>');
The resulting alert will have the full path to test.html – not about:blank, which is what window.location.href
would return.
To answer your question about redirecting, go with window.location.assign(url);
Create a Date
object using the diffence between your times as a constructor,
then use Calendar methods to get values ..
Date diff = new Date(d2.getTime() - d1.getTime());
Calendar calendar = Calendar.getInstance();
calendar.setTime(diff);
int hours = calendar.get(Calendar.HOUR_OF_DAY);
int minutes = calendar.get(Calendar.MINUTE);
int seconds = calendar.get(Calendar.SECOND);
Extremely Lightweight Modal popup plugin. POPELT - http://welbour.com/labs/popelt/
It is lightweight, supports nested popups, object oriented, supports dynamic buttons, responsive, and lot more. Next update will include Popup Ajax form submissions etc.
Feel free to use and tweet feedback.
If you want one that's a single character to match the right-facing triangle for "play," try Roman numeral 2. ? is Ⅱ
in HTML. If you can put formatting tags around it, it looks really good in bold. ? is <b>Ⅱ</b>
in HTML. This has much better support than the previously mentioned double vertical bar.
Here's a light weight way to use require and exports in your web client. It's a simple wrapper that creates a "namespace" global variable, and you wrap your CommonJS compatible code in a "define" function like this:
namespace.lookup('org.mydomain.mymodule').define(function (exports, require) {
var extern = require('org.other.module');
exports.foo = function foo() { ... };
});
More docs here:
You can use the JSON stringify
method.
JSON.stringify({x: 5, y: 6}); // '{"x":5,"y":6}' or '{"y":6,"x":5}'
There is pretty good support for this across the board when it comes to browsers, as shown on http://caniuse.com/#search=JSON. You will note, however, that versions of IE earlier than 8 do not support this functionality natively.
If you wish to cater to those users as well you will need a shim. Douglas Crockford has provided his own JSON Parser on github.
NOTE: Though this is possible, it is not at all recommended as it kind of destroys the reason for inheritance. The best way would be to restructure your application design so that there are NO parent to child dependencies. A parent should not ever need to know its children or their capabilities.
However.. you should be able to do it like:
void calculate(Person p) {
((Student)p).method();
}
a safe way would be:
void calculate(Person p) {
if(p instanceof Student) ((Student)p).method();
}
Click in the grid so it has focus.
Ctrl+End
This will force the rest of the records back into the grid.
All credit to http://www.thatjeffsmith.com/archive/2012/03/how-to-export-sql-developer-query-results-without-re-running-the-query/
How to update in codeignitor?
whenever you want to update same status with multiple rows you use where_in insteam of where or if you want to change only single record can use where.
below is my code
$conditionArray = array(1, 3, 4, 6);
$this->db->where_in("ip_id", $conditionArray);
$this->db->update($this->table, array("status" => 'active'));
its working perfect.
Late to the game, but you can also use a localisation file
DataTable provides a .json
localized file, which contains the key sEmptyTable
and the corresponding localized message.
For example, just download the localized json file on the above link, then initialize your Datatable
like that :
$('#example').dataTable( {
"language": {
"url": "path/to/your/json/file.json"
}
});
IMHO, that's a lot cleaner, because your localized content is located in an external file.
This syntax works for DataTables 1.10.16, I didn't test on previous versions.
I know this is an old answer but here is what I usually do:
CSS:
.form-control-inline {
width: auto;
float:left;
margin-right: 5px;
}
Then wrap the fields you want to be inlined in a div and add .form-control-inline to the input, example:
HTML
<label class="control-label">Date of birth:</label>
<div>
<select class="form-control form-control-inline" name="year"> ... </select>
<select class="form-control form-control-inline" name="month"> ... </select>
<select class="form-control form-control-inline" name="day"> ... </select>
</div>
I would use git submodules
.
have a look here Git repository in a Git repository
As per February2019, I would suggest Monorepos
There are many articles about writing code to import an excel file, but this is a manual/shortcut version:
If you don't need to import your Excel file programmatically using code you can do it very quickly using the menu in SQL Management Studio.
The quickest way to get your Excel file into SQL is by using the import wizard:
The next window is 'Choose a Data Source', select Excel:
In the 'Data Source' dropdown list select Microsoft Excel (this option should appear automatically if you have excel installed).
Click the 'Browse' button to select the path to the Excel file you want to import.
On the 'Specify Table Copy or Query' window:
'Select Source Tables:' choose the worksheet(s) from your Excel file and specify a destination table for each worksheet. If you don't have a table yet the wizard will very kindly create a new table that matches all the columns from your spreadsheet. Click Next.
Assuming HTTP authentication (WWW-Authenticate and Authorization headers) is in use, if authenticating as another user would grant access to the requested resource, then 401 Unauthorized should be returned.
403 Forbidden is used when access to the resource is forbidden to everyone or restricted to a given network or allowed only over SSL, whatever as long as it is no related to HTTP authentication.
If HTTP authentication is not in use and the service a cookie-based authentication scheme as is the norm nowadays, then a 403 or a 404 should be returned.
Regarding 401, this is from RFC 7235 (Hypertext Transfer Protocol (HTTP/1.1): Authentication):
3.1. 401 Unauthorized
The 401 (Unauthorized) status code indicates that the request has not been applied because it lacks valid authentication credentials for the target resource. The origin server MUST send a WWW-Authenticate header field (Section 4.4) containing at least one challenge applicable to the target resource. If the request included authentication credentials, then the 401 response indicates that authorization has been refused for those credentials. The client MAY repeat the request with a new or replaced Authorization header field (Section 4.1). If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user agent SHOULD present the enclosed representation to the user, since it usually contains relevant diagnostic information.
The semantics of 403 (and 404) have changed over time. This is from 1999 (RFC 2616):
10.4.4 403 Forbidden
The server understood the request, but is refusing to fulfill it.
Authorization will not help and the request SHOULD NOT be repeated.
If the request method was not HEAD and the server wishes to make
public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404
(Not Found) can be used instead.
In 2014 RFC 7231 (Hypertext Transfer Protocol (HTTP/1.1): Semantics and Content) changed the meaning of 403:
6.5.3. 403 Forbidden
The 403 (Forbidden) status code indicates that the server understood the request but refuses to authorize it. A server that wishes to make public why the request has been forbidden can describe that reason in the response payload (if any).
If authentication credentials were provided in the request, the
server considers them insufficient to grant access. The client
SHOULD NOT automatically repeat the request with the same
credentials. The client MAY repeat the request with new or different credentials. However, a request might be forbidden for reasons
unrelated to the credentials.An origin server that wishes to "hide" the current existence of a
forbidden target resource MAY instead respond with a status code of
404 (Not Found).
Thus, a 403 (or a 404) might now mean about anything. Providing new credentials might help... or it might not.
I believe the reason why this has changed is RFC 2616 assumed HTTP authentication would be used when in practice today's Web apps build custom authentication schemes using for example forms and cookies.
you may use
ImageSourceConverter class
to get what you want
img1.Source = (ImageSource)new ImageSourceConverter().ConvertFromString("/Assets/check.png");
Simple, just use the code below, as I do:
public void AppendSpecifiedBytes(ref byte[] dst, byte[] src)
{
// Get the starting length of dst
int i = dst.Length;
// Resize dst so it can hold the bytes in src
Array.Resize(ref dst, dst.Length + src.Length);
// For each element in src
for (int j = 0; j < src.Length; j++)
{
// Add the element to dst
dst[i] = src[j];
// Increment dst index
i++;
}
}
// Appends src byte to the dst array
public void AppendSpecifiedByte(ref byte[] dst, byte src)
{
// Resize dst so that it can hold src
Array.Resize(ref dst, dst.Length + 1);
// Add src to dst
dst[dst.Length - 1] = src;
}
In CSS, for the font-weight
property, the value: normal
defaults to the numeric value 400, and bold
to 700.
If you want to specify other weights, you need to give the number value. That number value needs to be supported for the font family that you are using.
For example you would define semi-bold like this:
font-weight: 600;
Here an JSFiddle using 'Open Sans' font family, loaded with the above weights.
if (User.Identity.IsAuthenticated)
{
Page.Title = "Home page for " + User.Identity.Name;
}
else
{
Page.Title = "Home page for guest user.";
}
To clip text with an ellipsis when it overflows a table cell, you will need to set the max-width
CSS property on each td
class for the overflow to work. No extra layout div
elements are required:
td
{
max-width: 100px;
overflow: hidden;
text-overflow: ellipsis;
white-space: nowrap;
}
For responsive layouts; use the max-width
CSS property to specify the effective minimum width of the column, or just use max-width: 0;
for unlimited flexibility. Also, the containing table will need a specific width, typically width: 100%;
, and the columns will typically have their width set as percentage of the total width
table {width: 100%;}
td
{
max-width: 0;
overflow: hidden;
text-overflow: ellipsis;
white-space: nowrap;
}
td.column_a {width: 30%;}
td.column_b {width: 70%;}
Historical: For IE 9 (or less) you need to have this in your HTML, to fix an IE-specific rendering issue
<!--[if IE]>
<style>
table {table-layout: fixed; width: 100px;}
</style>
<![endif]-->
If you want to handle multiple occurrences of substring pairs, it won't be easy without RegEx:
Regex.Matches(input ?? String.Empty, "(?=key : )(.*)(?<= - )", RegexOptions.Singleline);
input ?? String.Empty
avoids argument null exception?=
keeps 1st substring and?<=
keeps 2nd substringRegexOptions.Singleline
allows newline between substring pair
If order & occurrence count of substrings doesn't matter, this quick & dirty one may be an option:
var parts = input?.Split(new string[] { "key : ", " - " }, StringSplitOptions.None);
string result = parts?.Length >= 3 ? result[1] : input;
At least it avoids most exceptions, by returning the original string if none/single substring match.
There's a slightly better way:
int valueParsed;
if(Int32.TryParse(txtMyText.Text.Trim(), out valueParsed))
{ ... }
If you try to parse the text and it can't be parsed, the Int32.Parse method will raise an exception. I think it is better for you to use the TryParse method which will capture the exception and let you know as a boolean if any exception was encountered.
There are lot of complications in parsing text which Int32.Parse takes into account. It is foolish to duplicate the effort. As such, this is very likely the approach taken by VB's IsNumeric. You can also customize the parsing rules through the NumberStyles enumeration to allow hex, decimal, currency, and a few other styles.
Another common approach for non-web based applications is to restrict the input of the text box to only accept characters which would be parseable into an integer.
EDIT: You can accept a larger variety of input formats, such as money values ("$100") and exponents ("1E4"), by specifying the specific NumberStyles:
int valueParsed;
if(Int32.TryParse(txtMyText.Text.Trim(), NumberStyles.AllowCurrencySymbol | NumberStyles.AllowExponent, CultureInfo.CurrentCulture, out valueParsed))
{ ... }
... or by allowing any kind of supported formatting:
int valueParsed;
if(Int32.TryParse(txtMyText.Text.Trim(), NumberStyles.Any, CultureInfo.CurrentCulture, out valueParsed))
{ ... }
For the newer versions of Apache pdfbox. Here is the example from the original source
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.pdfbox.examples.util;
import java.io.File;
import java.io.IOException;
import org.apache.pdfbox.pdmodel.PDDocument;
import org.apache.pdfbox.pdmodel.encryption.AccessPermission;
import org.apache.pdfbox.text.PDFTextStripper;
/**
* This is a simple text extraction example to get started. For more advance usage, see the
* ExtractTextByArea and the DrawPrintTextLocations examples in this subproject, as well as the
* ExtractText tool in the tools subproject.
*
* @author Tilman Hausherr
*/
public class ExtractTextSimple
{
private ExtractTextSimple()
{
// example class should not be instantiated
}
/**
* This will print the documents text page by page.
*
* @param args The command line arguments.
*
* @throws IOException If there is an error parsing or extracting the document.
*/
public static void main(String[] args) throws IOException
{
if (args.length != 1)
{
usage();
}
try (PDDocument document = PDDocument.load(new File(args[0])))
{
AccessPermission ap = document.getCurrentAccessPermission();
if (!ap.canExtractContent())
{
throw new IOException("You do not have permission to extract text");
}
PDFTextStripper stripper = new PDFTextStripper();
// This example uses sorting, but in some cases it is more useful to switch it off,
// e.g. in some files with columns where the PDF content stream respects the
// column order.
stripper.setSortByPosition(true);
for (int p = 1; p <= document.getNumberOfPages(); ++p)
{
// Set the page interval to extract. If you don't, then all pages would be extracted.
stripper.setStartPage(p);
stripper.setEndPage(p);
// let the magic happen
String text = stripper.getText(document);
// do some nice output with a header
String pageStr = String.format("page %d:", p);
System.out.println(pageStr);
for (int i = 0; i < pageStr.length(); ++i)
{
System.out.print("-");
}
System.out.println();
System.out.println(text.trim());
System.out.println();
// If the extracted text is empty or gibberish, please try extracting text
// with Adobe Reader first before asking for help. Also read the FAQ
// on the website:
// https://pdfbox.apache.org/2.0/faq.html#text-extraction
}
}
}
/**
* This will print the usage for this document.
*/
private static void usage()
{
System.err.println("Usage: java " + ExtractTextSimple.class.getName() + " <input-pdf>");
System.exit(-1);
}
}
I would have tagged this as a comment but cant (dont have the rep) just wanted to thank Tilman. I was trying to get PDFsam (PDF Split and Merge) to work to no avail.
At launch it would produce an error stating that it could not find JRE 1.6.0. I Have both 32 and 64 bit versions and they check out fine at the java website in their respective browsers.
Tried uninstalling/reinstalling and rebooting repeatedly as well as using JavaRa. No such luck, still no go.
I looked in the registry after reading this post and there was no ...\SOFTWARE\JavaSoft\ key so I added each with their respective string values pointing to my x86 version (PDFsam is a 32bit program). This got past the first problem but an error popped up about amd64 libraries suggesting the machine wanted to run the 64bit version. So I changed the paths to the 64bit JRE and PDFsam now works.
FYI - I got here by searching for Java registry keys after I was unable to launch javaw.exe from command prompt (even after adding the requisite paths to system path), making the aforementioned changes solved this as well.
Since you are not worried about IE, why not just use css transitions to provide the animation and jQuery to change the classes. Live example: http://jsfiddle.net/tw16/JfK6N/
#someDiv{
-webkit-transition: all 0.5s ease;
-moz-transition: all 0.5s ease;
-o-transition: all 0.5s ease;
transition: all 0.5s ease;
}
Took this from JeffK and made it a little more compact.
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim Newline As String = System.Environment.NewLine
TextBox1.Text = "This is a test"
TextBox1.Text += Newline + "This is another test"
End Sub
Well you could get the ip address using asp.net, then do a reverse DNS lookup on the ip to get the hostname.
From the ASP.NET Developer's cookbook ... Performing a Reverse-DNS Lookup.
Technically, there is operator overloading in every programming language that can deal with different types of numbers, e.g. integer and real numbers. Explanation: The term overloading means that there are simply several implementations for one function. In most programming languages different implementations are provided for the operator +, one for integers, one for reals, this is called operator overloading.
Now, many people find it strange that Java has operator overloading for the operator + for adding strings together, and from a mathematical standpoint this would be strange indeed, but seen from a programming language's developer's standpoint, there is nothing wrong with adding builtin operator overloading for the operator + for other classes e.g. String. However, most people agree that once you add builtin overloading for + for String, then it is generally a good idea to provide this functionality for the developer as well.
A completely disagree with the fallacy that operator overloading obfuscates code, as this is left for the developer to decide. This is naïve to think, and to be quite honest, it is getting old.
+1 for adding operator overloading in Java 8.
I've found the answer regarding how to do this myself. Inside the model code, just put:
For Rails <= 2:
include ActionController::UrlWriter
For Rails 3:
include Rails.application.routes.url_helpers
This magically makes thing_path(self)
return the URL for the current thing, or other_model_path(self.association_to_other_model)
return some other URL.
I am using the following code in one of my current projects where i download data from the internet. It is all inside my activity class.
private class GetData extends AsyncTask<String, Void, JSONObject> {
@Override
protected void onPreExecute() {
super.onPreExecute();
progressDialog = ProgressDialog.show(Calendar.this,
"", "");
}
@Override
protected JSONObject doInBackground(String... params) {
String response;
try {
HttpClient httpclient = new DefaultHttpClient();
HttpPost httppost = new HttpPost(url);
HttpResponse responce = httpclient.execute(httppost);
HttpEntity httpEntity = responce.getEntity();
response = EntityUtils.toString(httpEntity);
Log.d("response is", response);
return new JSONObject(response);
} catch (Exception ex) {
ex.printStackTrace();
}
return null;
}
@Override
protected void onPostExecute(JSONObject result)
{
super.onPostExecute(result);
progressDialog.dismiss();
if(result != null)
{
try
{
JSONObject jobj = result.getJSONObject("result");
String status = jobj.getString("status");
if(status.equals("true"))
{
JSONArray array = jobj.getJSONArray("data");
for(int x = 0; x < array.length(); x++)
{
HashMap<String, String> map = new HashMap<String, String>();
map.put("name", array.getJSONObject(x).getString("name"));
map.put("date", array.getJSONObject(x).getString("date"));
map.put("description", array.getJSONObject(x).getString("description"));
list.add(map);
}
CalendarAdapter adapter = new CalendarAdapter(Calendar.this, list);
list_of_calendar.setAdapter(adapter);
}
}
catch (Exception e)
{
e.printStackTrace();
}
}
else
{
Toast.makeText(Calendar.this, "Network Problem", Toast.LENGTH_LONG).show();
}
}
}
and execute it in OnCreate Method like new GetData().execute();
where Calendar is my calendarActivity and i have also created a CalendarAdapter to set these values to a list view.
If you want a ksh only method that is as fast as "test", you can do something like:
contains() # haystack needle
{
haystack=${1/$2/}
if [ ${#haystack} -ne ${#1} ] ; then
return 1
fi
return 0
}
It works by deleting the needle in the haystack and then comparing the string length of old and new haystacks.
What might be easier, is to have two buttons and show/hide them in your functions. (ie. display:none|block;
) Each button could then have it's own onclick with whatever code you need.
So, at first button1
would be display:block
and button2
would be display:none
. Then when you click button1
it would switch button2
to be display:block
and button1
to be display:none
.
I recommend IdentityServer.This is a .NET Foundation project and covers many issues about authentication and authorization.
IdentityServer is a .NET/Katana-based framework and hostable component that allows implementing single sign-on and access control for modern web applications and APIs using protocols like OpenID Connect and OAuth2. It supports a wide range of clients like mobile, web, SPAs and desktop applications and is extensible to allow integration in new and existing architectures.
check out the documentation and the demo.
I confirm that git and msysgit can coexist on the same computer, as mentioned in "Which GIT version to use cygwin or msysGit or both?".
Git for Windows (msysgit) will run in its own shell (dos with git-cmd.bat
or bash with Git Bash.vbs
)
Update 2016: msysgit is obsolete, and the new Git for Windows now uses msys2
Git on Cygwin, after installing its package, will run in its own cygwin bash shell.
In there, you can do a sudo apt-get install git-core
and start using git on project-sources present either on the WSL container's "native" file-system (see below), or in the hosting Windows's file-system through the /mnt/c/...
, /mnt/d/...
directory hierarchies.
Specifically for the Bash on Windows or WSL (Windows Subsystem for Linux):
DrvFs
emulated file-system may not behave the same as files on the native VolFs
file-system).
- Unfortunately, it cannot invoke back into Windows executables, or
- interact with any native drivers (i.e. so no Graphic card, no USB drives yet).
Most likely you should increase Timeout parameter in apache conf (default value 120 sec)
React components expose all the standard Javascript mouse events in their top-level interface. Of course, you can still use :hover
in your CSS, and that may be adequate for some of your needs, but for the more advanced behaviors triggered by a hover you'll need to use the Javascript. So to manage hover interactions, you'll want to use onMouseEnter
and onMouseLeave
. You then attach them to handlers in your component like so:
<ReactComponent
onMouseEnter={() => this.someHandler}
onMouseLeave={() => this.someOtherHandler}
/>
You'll then use some combination of state/props to pass changed state or properties down to your child React components.
If you had permission from the content owners of the videos to upload copies in your own account, and then ensured that your account was set up with monetization turned off, then that would prevent ads from showing during playback. It's up to you to work out that arrangement/permission with the original videos' owners, of course.
(It's also worth pointing out that if your goal is to help non-profits raise money, then allowing them to monetize their video playbacks is in line with that goal...)
You did not do anything wrong here, it will any other thing that is overriding the image size.
You can check this working fiddle.
And in this fiddle I have alter the image size using %
, and it is working.
Also try using this code:
<img src="image.jpg" style="width: 50%; height: 50%"/>?
Here is the example fiddle.
If you are using this in chrome/chromium browser(ex: in Ubuntu 14.04), You can use one of the below command to tackle this issue.
ThinkPad-T430:~$ google-chrome --allow-file-access-from-files
ThinkPad-T430:~$ google-chrome --allow-file-access-from-files fileName.html
ThinkPad-T430:~$ chromium-browser --allow-file-access-from-files
ThinkPad-T430:~$ chromium-browser --allow-file-access-from-files fileName.html
This will allow you to load the file in chrome or chromium. If you have to do the same operation for windows you can add this switch in properties of the chrome shortcut or run it from cmd
with the flag. This operation is not allowed in Chrome, Opera, Internet Explorer by default. By default it works only in firefox and safari. Hence using this command will help you.
Alternately you can also host it on any web server (Example:Tomcat-java,NodeJS-JS,Tornado-Python, etc) based on what language you are comfortable with. This will work from any browser.
Also, make sure when you write the query involving the linked server, you include brackets like this:
SELECT * FROM [LinkedServer].[RemoteDatabase].[User].[Table]
I've found that at least on 2000/2005 the [] brackets are necessary, at least around the server name.
If you set the editable div style to "display:inline-block; white-space: pre-wrap" you don't get new child divs when you enter a new line, you just get LF character (i.e. 
);.
function showCursPos(){
selection = document.getSelection();
childOffset = selection.focusOffset;
const range = document.createRange();
eDiv = document.getElementById("eDiv");
range.setStart(eDiv, 0);
range.setEnd(selection.focusNode, childOffset);
var sHtml = range.toString();
p = sHtml.length;
sHtml=sHtml.replace(/(\r)/gm, "\\r");
sHtml=sHtml.replace(/(\n)/gm, "\\n");
document.getElementById("caretPosHtml").value=p;
document.getElementById("exHtml").value=sHtml;
}
_x000D_
click/type in div below:
<br>
<div contenteditable name="eDiv" id="eDiv"
onkeyup="showCursPos()" onclick="showCursPos()"
style="width: 10em; border: 1px solid; display:inline-block; white-space: pre-wrap; "
>123 456 789</div>
<p>
html caret position:<br> <input type="text" id="caretPosHtml">
<p>
html from start of div:<br> <input type="text" id="exHtml">
_x000D_
What I noticed was when you press "enter" in the editable div, it creates a new node, so the focusOffset resets to zero. This is why I've had to add a range variable, and extend it from the child nodes' focusOffset back to the start of eDiv (and thus capturing all text in-between).
Press Alt to make the menu visible and then in the View menu choose Appearance -> Show Menu Bar
.
macOS: If you are in Full-Screen mode you can either move the cursor to the top of the screen to see the menu, or you can exit Full-Screen using Ctrl+Cmd+F, or ^?F in alien's script.
Right click on your /bat/ folder and click Create Shortcut.
bat - Shortcut
in the current directory.Shortcut to bat
.Right click on the shortcut you just created and click Properties.
Change Target (under the Shortcut tab on Windows 7) to the following:
%windir%\system32\cmd.exe /c start "" "%CD%\bat\bat\run.bat"
Make sure Start in is blank. That causes it to start in the current directory.
That's probably acceptable in the case of shortcutting to a .bat but if you want to change the icon, open the shortcut's properties again and click Change Icon... (again, under the Shortcut tab on Windows 7). At this point you can Browse... for an icon or bring up a list of default system icons by entering
%SystemRoot%\system32\SHELL32.dll
to the left of the Browse...
button and hitting Enter. This works on Windows 7 and Windows XP but the icons are different due to style updates (but are recognizably similar). Depending on the version of Windows the shortcut resides, the icon will will sometimes change accordingly.
More Info:
See Using the "start" command with parameters passed to the started program to better understand the empty double-quotes at the beginning of the first Target command.
Here is my solution, I have been reading a lot of posts and they were really helpful. Finally I wrote some code for small files, with cURL and PHP that I think its really useful.
public function postFile()
{
$file_url = "test.txt"; //here is the file route, in this case is on same directory but you can set URL too like "http://examplewebsite.com/test.txt"
$eol = "\r\n"; //default line-break for mime type
$BOUNDARY = md5(time()); //random boundaryid, is a separator for each param on my post curl function
$BODY=""; //init my curl body
$BODY.= '--'.$BOUNDARY. $eol; //start param header
$BODY .= 'Content-Disposition: form-data; name="sometext"' . $eol . $eol; // last Content with 2 $eol, in this case is only 1 content.
$BODY .= "Some Data" . $eol;//param data in this case is a simple post data and 1 $eol for the end of the data
$BODY.= '--'.$BOUNDARY. $eol; // start 2nd param,
$BODY.= 'Content-Disposition: form-data; name="somefile"; filename="test.txt"'. $eol ; //first Content data for post file, remember you only put 1 when you are going to add more Contents, and 2 on the last, to close the Content Instance
$BODY.= 'Content-Type: application/octet-stream' . $eol; //Same before row
$BODY.= 'Content-Transfer-Encoding: base64' . $eol . $eol; // we put the last Content and 2 $eol,
$BODY.= chunk_split(base64_encode(file_get_contents($file_url))) . $eol; // we write the Base64 File Content and the $eol to finish the data,
$BODY.= '--'.$BOUNDARY .'--' . $eol. $eol; // we close the param and the post width "--" and 2 $eol at the end of our boundary header.
$ch = curl_init(); //init curl
curl_setopt($ch, CURLOPT_HTTPHEADER, array(
'X_PARAM_TOKEN : 71e2cb8b-42b7-4bf0-b2e8-53fbd2f578f9' //custom header for my api validation you can get it from $_SERVER["HTTP_X_PARAM_TOKEN"] variable
,"Content-Type: multipart/form-data; boundary=".$BOUNDARY) //setting our mime type for make it work on $_FILE variable
);
curl_setopt($ch, CURLOPT_USERAGENT, 'Mozilla/1.0 (Windows NT 6.1; WOW64; rv:28.0) Gecko/20100101 Firefox/28.0'); //setting our user agent
curl_setopt($ch, CURLOPT_URL, "api.endpoint.post"); //setting our api post url
curl_setopt($ch, CURLOPT_COOKIEJAR, $BOUNDARY.'.txt'); //saving cookies just in case we want
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, 1); // call return content
curl_setopt ($ch, CURLOPT_FOLLOWLOCATION, 1); navigate the endpoint
curl_setopt($ch, CURLOPT_POST, true); //set as post
curl_setopt($ch, CURLOPT_POSTFIELDS, $BODY); // set our $BODY
$response = curl_exec($ch); // start curl navigation
print_r($response); //print response
}
With this we should be get on the "api.endpoint.post" the following vars posted. You can easily test with this script, and you should be receive this debugs on the function postFile()
at the last row.
print_r($response); //print response
public function getPostFile()
{
echo "\n\n_SERVER\n";
echo "<pre>";
print_r($_SERVER['HTTP_X_PARAM_TOKEN']);
echo "/<pre>";
echo "_POST\n";
echo "<pre>";
print_r($_POST['sometext']);
echo "/<pre>";
echo "_FILES\n";
echo "<pre>";
print_r($_FILEST['somefile']);
echo "/<pre>";
}
It should work well, they may be better solutions but this works and is really helpful to understand how the Boundary and multipart/from-data mime works on PHP and cURL library.
If a parameter is expected to have a specific property, you can document that property by providing an additional @param tag. For example, if an employee parameter is expected to have name and department properties, you can document it as follows:
/**
* Assign the project to a list of employees.
* @param {Object[]} employees - The employees who are responsible for the project.
* @param {string} employees[].name - The name of an employee.
* @param {string} employees[].department - The employee's department.
*/
function(employees) {
// ...
}
If a parameter is destructured without an explicit name, you can give the object an appropriate one and document its properties.
/**
* Assign the project to an employee.
* @param {Object} employee - The employee who is responsible for the project.
* @param {string} employee.name - The name of the employee.
* @param {string} employee.department - The employee's department.
*/
Project.prototype.assign = function({ name, department }) {
// ...
};
Source: JSDoc
String[] elements = { "a", "a","a","a" };
for( int i=0; i<elements.length-1; i++)
{
String s1 = elements[i];
String s2 = elements[i+1];
}
The DateTimeFormatInfo class implements this interface, so it allows you to control the formatting of your DateTime strings.
Just adding .First
to your bananaToken
should do it:
foodJsonObj["food"]["fruit"]["orange"].Parent.AddAfterSelf(bananaToken
.First
);
.First
basically moves past the {
to make it a JProperty
instead of a JToken
.
@Brian Rogers, Thanks I forgot the .Parent
. Edited
Try
$date = '2012-10-11';
$day = 1;
$days = array('Sunday', 'Monday', 'Tuesday', 'Wednesday','Thursday','Friday', 'Saturday');
echo date('Y-m-d', strtotime($days[$day], strtotime($date)));
Try to set the element's value using the executeScript
method of JavascriptExecutor:
WebDriver driver = new FirefoxDriver();
JavascriptExecutor jse = (JavascriptExecutor)driver;
jse.executeScript("document.getElementById('elementID').setAttribute('value', 'new value for element')");
Since nobody posted the modern C++ approach yet,
#include <iostream>
#include <random>
int main()
{
std::random_device rd; // obtain a random number from hardware
std::mt19937 gen(rd()); // seed the generator
std::uniform_int_distribution<> distr(25, 63); // define the range
for(int n=0; n<40; ++n)
std::cout << distr(gen) << ' '; // generate numbers
}
Assuming you're getting norm
from scipy.stats
, you probably just need to sort your list:
import numpy as np
import scipy.stats as stats
import matplotlib.pyplot as plt
h = [186, 176, 158, 180, 186, 168, 168, 164, 178, 170, 189, 195, 172,
187, 180, 186, 185, 168, 179, 178, 183, 179, 170, 175, 186, 159,
161, 178, 175, 185, 175, 162, 173, 172, 177, 175, 172, 177, 180]
h.sort()
hmean = np.mean(h)
hstd = np.std(h)
pdf = stats.norm.pdf(h, hmean, hstd)
plt.plot(h, pdf) # including h here is crucial
And so I get:
Although this is not exactly what OP meant as this is not super simple, however, when running scripts from Notepad++ the os.getcwd()
method doesn't work as expected. This is what I would do:
import os
# get real current directory (determined by the file location)
curDir, _ = os.path.split(os.path.abspath(__file__))
print(curDir) # print current directory
Define a function like this:
def dir_up(path,n): # here 'path' is your path, 'n' is number of dirs up you want to go
for _ in range(n):
path = dir_up(path.rpartition("\\")[0], 0) # second argument equal '0' ensures that
# the function iterates proper number of times
return(path)
The use of this function is fairly simple - all you need is your path and number of directories up.
print(dir_up(curDir,3)) # print 3 directories above the current one
The only minus is that it doesn't stop on drive letter, it just will show you empty string.
This:
document.getElementById('myField').onblur();
works because your element (the <input>
) has an attribute called "onblur" whose value is a function. Thus, you can call it. You're not telling the browser to simulate the actual "blur" event, however; there's no event object created, for example.
Elements do not have a "blur" attribute (or "method" or whatever), so that's why the first thing doesn't work.
Use the <shape>
tag to create a drawable in XML with rounded corners. (You can do other stuff with the shape tag like define a color gradient as well).
Here's a copy of a XML file I'm using in one of my apps to create a drawable with a white background, black border and rounded corners:
<?xml version="1.0" encoding="UTF-8"?>
<shape xmlns:android="http://schemas.android.com/apk/res/android">
<solid android:color="#ffffffff"/>
<stroke android:width="3dp"
android:color="#ff000000" />
<padding android:left="1dp"
android:top="1dp"
android:right="1dp"
android:bottom="1dp" />
<corners android:radius="7dp" />
</shape>
That meta tag basically specifies which character set a website is written with.
Here is a definition of UTF-8:
UTF-8 (U from Universal Character Set + Transformation Format—8-bit) is a character encoding capable of encoding all possible characters (called code points) in Unicode. The encoding is variable-length and uses 8-bit code units.
One thing to add - I found that Razor syntax hilighter (and probably the compiler) interpret the position of the opening bracket differently:
<script type="text/javascript">
var somevar = new Array();
@foreach (var item in items)
{ // <---- placed on a separate line, NOT WORKING, HILIGHTS SYNTAX ERRORS
<text>
</text>
}
@foreach (var item in items) { // <---- placed on the same line, WORKING !!!
<text>
</text>
}
</script>
For any case set overflow-x
to hidden
and I prefer to set max-height
in order to limit the expansion of the height of the div. Your code should looks like this:
overflow-y: scroll;
overflow-x: hidden;
max-height: 450px;
If you:
Below was benchmarked on a ~10Mb xlsx
, xlsb
file.
xlsx, xls
from openpyxl import load_workbook
def get_sheetnames_xlsx(filepath):
wb = load_workbook(filepath, read_only=True, keep_links=False)
return wb.sheetnames
Benchmarks: ~ 14x speed improvement
# get_sheetnames_xlsx vs pd.read_excel
225 ms ± 6.21 ms per loop (mean ± std. dev. of 7 runs, 1 loop each)
3.25 s ± 140 ms per loop (mean ± std. dev. of 7 runs, 1 loop each)
xlsb
from pyxlsb import open_workbook
def get_sheetnames_xlsb(filepath):
with open_workbook(filepath) as wb:
return wb.sheets
Benchmarks: ~ 56x speed improvement
# get_sheetnames_xlsb vs pd.read_excel
96.4 ms ± 1.61 ms per loop (mean ± std. dev. of 7 runs, 10 loops each)
5.36 s ± 162 ms per loop (mean ± std. dev. of 7 runs, 1 loop each)
Notes:
xlrd
is no longer maintained as of 2020From Laravel 5.7 and date format i.e.: 12/31/2019
function checkDateFormat(string $date): bool
{
return preg_match("/^(0[1-9]|1[0-2])\/(0[1-9]|[1-2][0-9]|3[0-1])\/[0-9]{4}$/", $date);
}
I got this error and found that I don't have my SSH port (non standard number) whitelisted in config server firewall.
For Laravel 5.x, use $storage_path = storage_path()
.
From the Laravel 5.0 docs:
storage_path
Get the fully qualified path to the
storage
directory.
Note also that, for Laravel 5.1 and above, per the Laravel 5.1 docs:
You may also use the
storage_path
function to generate a fully qualified path to a given file relative to the storage directory:$path = storage_path('app/file.txt');
Use online service http://www.extractpdf.com. No need to install anything.
Direct answer: No
But you can simulate reference with wrappers.
And do the following:
void changeString( _<String> str ) {
str.s("def");
}
void testRef() {
_<String> abc = new _<String>("abc");
changeString( abc );
out.println( abc ); // prints def
}
Out
void setString( _<String> ref ) {
str.s( "def" );
}
void testOut(){
_<String> abc = _<String>();
setString( abc );
out.println(abc); // prints def
}
And basically any other type such as:
_<Integer> one = new <Integer>(1);
addOneTo( one );
out.println( one ); // May print 2
I had an excel file 24MB in Size, thanks to over a 100 images within. I reduced the size to less than 5MB by the following steps:
It took me 2 days to figure this out as this wasnt listed in any help forum. Hope this response helps someone
BR Gautam Dalal (India)
Try this::
sb_trim = Regex.Replace(stw, @"(\D+)\s+\$([\d,]+)\.\d+\s+(.)",
m => string.Format(
"{0},{1},{2}",
m.Groups[1].Value,
m.Groups[2].Value.Replace(",", string.Empty),
m.Groups[3].Value));
This is about as clean an answer as you'll get, at least with regexes.
(\D+)
: First capture group. One or more non-digit characters.\s+\$
: One or more spacing characters, then a literal dollar sign ($).([\d,]+)
: Second capture group. One or more digits and/or commas.\.\d+
: Decimal point, then at least one digit.\s+
: One or more spacing characters.(.)
: Third capture group. Any non-line-breaking character.The second capture group additionally needs to have its commas stripped. You could do this with another regex, but it's really unnecessary and bad for performance. This is why we need to use a lambda expression and string format to piece together the replacement. If it weren't for that, we could just use this as the replacement, in place of the lambda expression:
"$1,$2,$3"
objdump is another good one on linux.
SELECT <...>
FROM A.tableA JOIN B.tableB
On linux use ip addr
instead of ifconfig
since ifconfig
is deprecated for many years and not installed by default in recent distros
Like this ? (Visual Studio Code version 0.10.11)
Fold All (Ctrl+K Ctrl+0)
Unfold All (Ctrl+K Ctrl+J)
Fold Level n (Ctrl+K Ctrl+N)
You need convert to number type:
(+Low).toFixed(2)
...and if you want to ignore more than one directory (say build/
temp/
and *.tmp
files), you could either do it in two steps (ignoring the first and edit ignore properties (see other answers here) or one could write something like
svn propset svn:ignore "build
temp
*.tmp" .
on the command line.
I have tried like this
git rm --cached -r * -f
And it is working for me.
It has nothing to do with your form or the values in it. It gets fired by the browser to prevent the user from repeating the same request with the cached data. If you really need to enable the refreshing of the result page, you should redirect the user, either via PHP (header('Location:result.php');
) or other server-side language you're using. Meta tag solution should work also to disable the resending on refresh.
The answer here is very simple:
You're already containing it in double quotes, so there's no need to escape it with \
.
If you want to escape single quotes in a single quote string:
var string = 'this isn\'t a double quoted string';
var string = "this isn\"t a single quoted string";
// ^ ^ same types, hence we need to escape it with a backslash
or if you want to escape \'
, you can escape the bashslash to \\
and the quote to \'
like so:
var string = 'this isn\\\'t a double quoted string';
// vvvv
// \ ' (the escaped characters)
However, if you contain the string with a different quote type, you don't need to escape:
var string = 'this isn"t a double quoted string';
var string = "this isn't a single quoted string";
// ^ ^ different types, hence we don't need escaping
A hacky way of printing a backslash that doesn't involve escaping is to pass its character code to chr
:
>>> print(chr(92))
\
Android NDK 18.0* seems has an issue not creating all the files in folders after extraction. Due to it, your app compilation will fail which uses ndk builds.
Better is to use NDK 17.1* (https://developer.android.com/ndk/downloads/) etc version and you can extract or use the android studio extraction to ndk-bundle by default will work good.
At its simplest:
#include <iostream>
using namespace std;
class A {
public:
A( int x ) : n( x ){}
void print() { cout << n << endl; }
private:
int n;
};
void func( A p ) {
p.print();
}
int main () {
A a;
func ( a );
}
Of course, you should probably be using references to pass the object, but I suspect you haven't got to them yet.
If you're using JUnit, have a look at junit-addons. It has the ability to ignore the Java security model and access private methods and attributes.
C++ solution found here (http://www.cplusplus.com/forum/unices/16430/)
#include <signal.h>
#include <stdio.h>
#include <unistd.h>
void ouch(int sig)
{
printf("OUCH! - I got signal %d\n", sig);
}
int main()
{
struct sigaction act;
act.sa_handler = ouch;
sigemptyset(&act.sa_mask);
act.sa_flags = 0;
sigaction(SIGINT, &act, 0);
while(1) {
printf("Hello World!\n");
sleep(1);
}
}
set STATICBUILD=true && pip install lxml
run this command instead, must have VS C++ compiler installed first
https://blogs.msdn.microsoft.com/pythonengineering/2016/04/11/unable-to-find-vcvarsall-bat/
It works for me with Python 3.5.2 and Windows 7
To refresh the component at regular intervals I found this the best method. In the ngOnInit method setTimeOut function
ngOnInit(): void {
setTimeout(() => { this.ngOnInit() }, 1000 * 10)
}
//10 is the number of seconds
Use this if you're in the fragment.
@Override
public void onDestroy() {
super.onDestroy();
getFragmentManager().beginTransaction().remove((Fragment) youfragmentname).commitAllowingStateLoss();
}
It looks like you're using python 3.x. In python3, filter
, map
, zip
, etc return an object which is iterable, but not a list. In other words,
filter(func,data) #python 2.x
is equivalent to:
list(filter(func,data)) #python 3.x
I think it was changed because you (often) want to do the filtering in a lazy sense -- You don't need to consume all of the memory to create a list up front, as long as the iterator returns the same thing a list would during iteration.
If you're familiar with list comprehensions and generator expressions, the above filter is now (almost) equivalent to the following in python3.x:
( x for x in data if func(x) )
As opposed to:
[ x for x in data if func(x) ]
in python 2.x
The Android plugin 0.8.x doesn't support Gradle 1.11, you need to use 1.10.
You can read the proper error message in the "Gradle Console" tab.
EDIT
You need to change gradle/wrapper/gradle-wrapper.properties
file in this way:
distributionBase=GRADLE_USER_HOME
distributionPath=wrapper/dists
zipStoreBase=GRADLE_USER_HOME
zipStorePath=wrapper/dists
distributionUrl=http\://services.gradle.org/distributions/gradle-1.10-all.zip
If you want to see the array as an array, you can say
alert(JSON.stringify(aCustomers));
instead of all those document.write
s.
However, if you want to display them cleanly, one per line, in your popup, do this:
alert(aCustomers.join("\n"));
Maybe you forgot the await before returning your collection
You can use WEBRTC but unfortunately it is not supported by all web browsers. BELOW IS THE LINK TO SHOW WHICH BROWSERS supports it http://caniuse.com/stream
And this link gives you an idea of how you can access it(sample code). http://www.html5rocks.com/en/tutorials/getusermedia/intro/
It doesn't matter if the random_state is 0 or 1 or any other integer. What matters is that it should be set the same value, if you want to validate your processing over multiple runs of the code. By the way I have seen random_state=42
used in many official examples of scikit as well as elsewhere also.
random_state
as the name suggests, is used for initializing the internal random number generator, which will decide the splitting of data into train and test indices in your case. In the documentation, it is stated that:
If random_state is None or np.random, then a randomly-initialized RandomState object is returned.
If random_state is an integer, then it is used to seed a new RandomState object.
If random_state is a RandomState object, then it is passed through.
This is to check and validate the data when running the code multiple times. Setting random_state
a fixed value will guarantee that same sequence of random numbers are generated each time you run the code. And unless there is some other randomness present in the process, the results produced will be same as always. This helps in verifying the output.
Had the same issue, the reason for it was BCrypt.Net library, compiled using .NET 2.0 framework, while the whole project, which used it, was compiling with .NET 4.0. If symptoms are the same, try download BCrypt source code and rebuild it in release configuration within .NET 4.0. After I'd done it "pre-login handshake" worked fine. Hope it helps anyone.
This error can also be caused if an assembly is loaded using Assembly.LoadFrom(String) and is referencing an assembly that was already loaded using Assembly.Load(Byte[]).
For instance you have embedded the main application's referenced assemblies as resources but your app loads plug-ins from a specific folder.
Instead of using LoadFrom you should use Load. The following code will do the job:
private static Assembly LoadAssemblyFromFile( String filePath )
{
using( Stream stream = File.OpenRead( filePath ) )
{
if( !ReferenceEquals( stream, null ) )
{
Byte[] assemblyData = new Byte[stream.Length];
stream.Read( assemblyData, 0, assemblyData.Length );
return Assembly.Load( assemblyData );
}
}
return null;
}
Having been bitten by this, I have a habit of including locally defined variables in the innermost scope which I use to transfer to any closure. In your example:
foreach (var s in strings)
query = query.Where(i => i.Prop == s); // access to modified closure
I do:
foreach (var s in strings)
{
string search = s;
query = query.Where(i => i.Prop == search); // New definition ensures unique per iteration.
}
Once you have that habit, you can avoid it in the very rare case you actually intended to bind to the outer scopes. To be honest, I don't think I have ever done so.
The angular way is shown in the angular docs :)
https://docs.angularjs.org/api/ng/directive/ngReadonly
Here is the example they use:
<body>
Check me to make text readonly: <input type="checkbox" ng-model="checked"><br/>
<input type="text" ng-readonly="checked" value="I'm Angular"/>
</body>
Basically the angular way is to create a model object that will hold whether or not the input should be readonly and then set that model object accordingly. The beauty of angular is that most of the time you don't need to do any dom manipulation. You just have angular render the view they way your model is set (let angular do the dom manipulation for you and keep your code clean).
So basically in your case you would want to do something like below or check out this working example.
<button ng-click="isInput1ReadOnly = !isInput1ReadOnly">Click Me</button>
<input type="text" ng-readonly="isInput1ReadOnly" value="Angular Rules!"/>
Here is an example of flat badges that play well with zurb foundation css framework
Note: you might have to adjust the height for different fonts.
http://jsfiddle.net/jamesharrington/xqr5nx1o/
The Magic sauce!
.label {
background:#EA2626;
display:inline-block;
border-radius: 12px;
color: white;
font-weight: bold;
height: 17px;
padding: 2px 3px 2px 3px;
text-align: center;
min-width: 16px;
}
Faced this issue on Android studio 4.1, windows 10.
The solution that worked for me:
1 - Go to gradle.properties file which is in the root directory of the project.
2 - Comment this line or similar one (org.gradle.jvmargs=-Xmx1536m) to let android studio decide on the best compatible option.
3 - Now close any open project from File -> close project.
4 - On the Welcome window, Go to Configure > Settings.
5 - Go to Build, Execution, Deployment > Compiler
6 - Change Build process heap size (Mbytes) to 1024 and VM Options to -Xmx512m.
Now close the android studio and restart it. The issue will be gone.
I had the same problem and on windows platform and i just ran the below command
npm install -g win-node-env
and everything works normally
If you want to change the color of your toolbar all throughout your app, leverage the styles.xml. In general, I avoid altering ui components in my java code unless I am trying to do something programatically. If this is a one time set, then you should be doing it in xml to make your code cleaner. Here is what your styles.xml will look like:
<!-- Base application theme. -->
<style name="YourAppName.AppTheme" parent="Theme.AppCompat.Light.DarkActionBar">
<!-- Color Primary will be your toolbar color -->
<item name="colorPrimary">@color/colorPrimary</item>
<!-- Color Primary Dark will be your default status bar color -->
<item name="colorPrimaryDark">@color/colorPrimaryDark</item>
</style>
Make sure you use the above style in your AndroidManifext.xml as such:
<application
android:theme="@style/YourAppName.AppTheme">
</application>
I wanted different toolbar colors for different activities. So I leveraged styles again like this:
<style name="YourAppName.AppTheme.Activity1">
<item name="colorPrimary">@color/activity1_primary</item>
<item name="colorPrimaryDark">@color/activity1_primaryDark</item>
</style>
<style name="YourAppName.AppTheme.Activity2">
<item name="colorPrimary">@color/activity2_primary</item>
<item name="colorPrimaryDark">@color/activity2_primaryDark</item>
</style>
again, apply the styles to each activity in your AndroidManifest.xml as such:
<activity
android:name=".Activity2"
android:theme="@style/YourAppName.AppTheme.Activity2"
</activity>
<activity
android:name=".Activity1"
android:theme="@style/YourAppName.AppTheme.Activity1"
</activity>
you can add this code :
[class*="col-"] {
padding-top: 1rem;
padding-bottom: 1rem;
}
Most likely it's because your system shutdown unexpectedly
Try
postgres -D /usr/local/var/postgres
You might see
FATAL: lock file "postmaster.pid" already exists HINT: Is another postmaster (PID 449) running in data directory "/usr/local/var/postgres"?
Then try
kill -9 PID
example
kill -9 419
And it should start postgres normally
This query stands good for fetching the values between current date and its next 3 dates
SELECT * FROM tableName WHERE columName
BETWEEN CURDATE() AND DATE_ADD(CURDATE(), INTERVAL 3 DAY)
This will eventually add extra 3 days of buffer to the current date.
SELECT date_created
FROM your_table
WHERE DATENAME(dw, date_created) NOT IN ('Saturday', 'Sunday')
I like to keep things simple therefore:
int tot_seconds = 5000;
int hours = tot_seconds / 3600;
int minutes = (tot_seconds % 3600) / 60;
int seconds = tot_seconds % 60;
String timeString = String.format("%02d Hour %02d Minutes %02d Seconds ", hours, minutes, seconds);
System.out.println(timeString);
The result will be: 01 Hour 23 Minutes 20 Seconds
Yes. Try:
class USBDevice : GenericDevice, IOurDevice
Note: The base class should come before the list of interface names.
Of course, you'll still need to implement all the members that the interfaces define. However, if the base class contains a member that matches an interface member, the base class member can work as the implementation of the interface member and you are not required to manually implement it again.
Using lodash you want _.uniqBy
var arr3 = _.uniqBy(arr1.concat(arr2), 'name'); // es5
let arr3 = _.uniqBy([...arr1, ...arr2], 'name'); // es6
Order of arr1, arr2 matters!
The following will update all rows in one table
Update Table Set
Column1 = 'New Value'
The next one will update all rows where the value of Column2 is more than 5
Update Table Set
Column1 = 'New Value'
Where
Column2 > 5
There is all Unkwntech's example of updating more than one table
UPDATE table1, table2 SET
table1.col1 = 'value',
table2.col1 = 'value'
WHERE
table1.col3 = '567'
AND table2.col6='567'
Though It's late to answer. This module can do: https://github.com/danghvu/mod_dumpost
Do you want to make the label (except for the text) transparent? Windows Forms (I assume WinForms - is this true) doesn't really support transparency. The easiest way, sometimes, is Label's Backcolor to Transparent.
label1.BackColor = System.Drawing.Color.Transparent;
You will run into problems though, as WinForms really doesn't properly support transparency. Otherwise, see here:
http://www.doogal.co.uk/transparent.php
http://www.codeproject.com/KB/dotnet/transparent_controls_net.aspx
http://www.daniweb.com/code/snippet216425.html
Setting the parent of a usercontrol prevents it from being transparent
Good luck!
I tried to edit @numan's answer with a fix for writing garbage data but edit was rejected. While this short piece of code is nothing brilliant I can't see any other better answer. Here's what makes most sense to me:
ByteArrayOutputStream out = new ByteArrayOutputStream();
byte[] buffer = new byte[1024]; // you can configure the buffer size
int length;
while ((length = in.read(buffer)) != -1) out.write(buffer, 0, length); //copy streams
in.close(); // call this in a finally block
byte[] result = out.toByteArray();
btw ByteArrayOutputStream need not be closed. try/finally constructs omitted for readability
For completeness, the simplest solution i know with seaborn as of late 2019, if one is using Jupyter:
import seaborn as sns
sns.heatmap(dataframe.corr())
I use the latest version of SSMS or sql server management studio. I have a SQL script (in query editor) which has about 100 lines of code. This is error I got in the query:
Msg 245, Level 16, State 1, Line 2
Conversion failed when converting the nvarchar value 'abcd' to data type int.
Solution - I had seen this kind of error before when I forgot to enclose a number (in varchar column) in single quotes.
As an aside, the error message is misleading. The actual error on line number 70 in the query editor and not line 2 as the error says!
Well firstly C doesn't have public/private/virtual functions. That's C++ and it has different conventions. In C typically you have:
C++ is more complex. I've seen a real mix here. Camel case for class names or lowercase+underscores (camel case is more common in my experience). Structs are used rarely (and typically because a library requires them, otherwise you'd use classes).
POJO = Plain Old Java Object. It has properties, getters and setters for respective properties. It may also override Object.toString()
and Object.equals()
.
Java Beans : See Wiki link.
Normal Class : Any java Class.
Yes, scripts can access properties of other windows in the same domain that they have a handle on (typically gained through window.open/opener and window.frames/parent). It is usually more manageable to call functions defined on the other window rather than fiddle with variables directly.
However, windows can die or move on, and browsers deal with it differently when they do. Check that a window (a) is still open (!window.closed) and (b) has the function you expect available, before you try to call it.
Simple values like strings are fine, but generally it isn't a good idea to pass complex objects such as functions, DOM elements and closures between windows. If a child window stores an object from its opener, then the opener closes, that object can become 'dead' (in some browsers such as IE), or cause a memory leak. Weird errors can ensue.
Here's yet another way, using pure NumPy, no recursion, no list comprehension, and no explicit for loops. It's about 20% slower than the original answer, and it's based on np.meshgrid.
def cartesian(*arrays):
mesh = np.meshgrid(*arrays) # standard numpy meshgrid
dim = len(mesh) # number of dimensions
elements = mesh[0].size # number of elements, any index will do
flat = np.concatenate(mesh).ravel() # flatten the whole meshgrid
reshape = np.reshape(flat, (dim, elements)).T # reshape and transpose
return reshape
For example,
x = np.arange(3)
a = cartesian(x, x, x, x, x)
print(a)
gives
[[0 0 0 0 0]
[0 0 0 0 1]
[0 0 0 0 2]
...,
[2 2 2 2 0]
[2 2 2 2 1]
[2 2 2 2 2]]
I had similar requirements but I didn't want to use v-model
to have the state in the parent component. Then I got this to work:
<input
type="checkbox"
:checked="checked"
@input="checked = $event.target.checked"
/>
To pass down the value from the parent, I made a small change on this and it works.
<input
type="checkbox"
:checked="aPropFrom"
@input="$emit('update:aPropFrom', $event.target.checked)"
/>
https://support.google.com/googleplay/android-developer/answer/1078870?hl=en&ref_topic=2897459
You need to pass an array of element to jsx
. The problem is that forEach
does not return anything (i.e it returns undefined
). So it's better to use map
because map
returns an array:
class QuestionSet extends Component {
render(){
<div className="container">
<h1>{this.props.question.text}</h1>
{this.props.question.answers.map((answer, i) => {
console.log("Entered");
// Return the element. Also pass key
return (<Answer key={answer} answer={answer} />)
})}
}
export default QuestionSet;
In python a list knows its length, so you can just do len(sys.argv)
to get the number of elements in argv
.
Dim shll : Set shll = CreateObject("WScript.Shell")
Set Rt = shll.Exec("Notepad") : wscript.sleep 4000 : Rt.Terminate
Run the process with .Exec
.
Then wait for 4 seconds.
After that kill this process.
You must put a FrameLayout as Main view then put inside a RelativeLayout with ScrollView and at least your RecyclerView, it works for me.
The real trick here is the RelativeLayout...
Happy to help.
The singular form dtype
is used to check the data type for a single column. And the plural form dtypes
is for data frame which returns data types for all columns. Essentially:
For a single column:
dataframe.column.dtype
For all columns:
dataframe.dtypes
Example:
import pandas as pd
df = pd.DataFrame({'A': [1,2,3], 'B': [True, False, False], 'C': ['a', 'b', 'c']})
df.A.dtype
# dtype('int64')
df.B.dtype
# dtype('bool')
df.C.dtype
# dtype('O')
df.dtypes
#A int64
#B bool
#C object
#dtype: object
The border styling is set on the td
elements.
html:
<table class='table borderless'>
css:
.borderless td, .borderless th {
border: none;
}
Update: Since Bootstrap 4.1 you can use .table-borderless
to remove the border.
https://getbootstrap.com/docs/4.1/content/tables/#borderless-table
For different string, you can do it without using dangerous eval
method:
hash_as_string = "{\"0\"=>{\"answer\"=>\"1\", \"value\"=>\"No\"}, \"1\"=>{\"answer\"=>\"2\", \"value\"=>\"Yes\"}, \"2\"=>{\"answer\"=>\"3\", \"value\"=>\"No\"}, \"3\"=>{\"answer\"=>\"4\", \"value\"=>\"1\"}, \"4\"=>{\"value\"=>\"2\"}, \"5\"=>{\"value\"=>\"3\"}, \"6\"=>{\"value\"=>\"4\"}}"
JSON.parse hash_as_string.gsub('=>', ':')
This works too ..
var image = new Image();
image.src = 'image url';
image.onload = function(e){
// functionalities on load
}
$("#img-container").append(image);
There's also the MySQL FIELD
function.
If you want complete sorting for all possible values:
SELECT id, name, priority
FROM mytable
ORDER BY FIELD(name, "core", "board", "other")
If you only care that "core" is first and the other values don't matter:
SELECT id, name, priority
FROM mytable
ORDER BY FIELD(name, "core") DESC
If you want to sort by "core" first, and the other fields in normal sort order:
SELECT id, name, priority
FROM mytable
ORDER BY FIELD(name, "core") DESC, priority
There are some caveats here, though:
First, I'm pretty sure this is mysql-only functionality - the question is tagged mysql, but you never know.
Second, pay attention to how FIELD()
works: it returns the one-based index of the value - in the case of FIELD(priority, "core")
, it'll return 1 if "core" is the value. If the value of the field is not in the list, it returns zero. This is why DESC
is necessary unless you specify all possible values.
Make sure your oracle services are running automatically. Just press Win+R. Type services.msc in textbox then press O to find oracle services.
In your PC name might be like OracleserviceXYZ. Right click on highlighted services.
Instead of using:
document.add( Chunk.NEWLINE );
use this:
document.add(new Paragraph(""));
it makes small space
You can also use this:
DF[paste0("stu",c(2,3,5,9)), ]
Select your element aka the navbar.
.navbar{ background-image:url(link that the site provides); background-repeat:repeat;
<script type="text/javascript">
$(document).ready(function() {
$(this).attr("title", "sometitle");
});
</script>
Following https://docs.microsoft.com/en-gb/visualstudio/ide/reference/how-to-manage-word-wrap-in-the-editor
When viewing a document: Edit / Advanced / Word Wrap (Ctrl+E, Ctrl+W)
General settings: Tools / Options / Text Editor / All Languages / Word wrap
Or search for 'word wrap' in the Quick Launch box.
If you're familiar with word wrap in Notepad++, Sublime Text, or Visual Studio Code, be aware of the following issues where Visual Studio behaves differently to other editors:
Unfortunately these bugs have been closed "lower priority". If you'd like these bugs fixed, please vote for the feature request Fix known issues with word wrap.
I think you are forgetting about the border. Having a one-pixel-wide border on the Div will take away two pixels of total length. Therefore it will appear as though the div is two pixels shorter than it actually is.
Change this line:
model = forest.fit(train_fold, train_y)
to:
model = forest.fit(train_fold, train_y.values.ravel())
Edit:
.values
will give the values in an array. (shape: (n,1)
.ravel
will convert that array shape to (n, )
It sounds like you want the ifelse statement to interpret NA values as FALSE instead of NA in the comparison. I use the following functions to handle this situation so I don't have to continuously handle the NA situation:
falseifNA <- function(x){
ifelse(is.na(x), FALSE, x)
}
ifelse2 <- function(x, a, b){
ifelse(falseifNA(x), a, b)
}
You could also combine these functions into one to be more efficient. So to return the result you want, you could use:
test$ID <- ifelse2(is.na(test$time) | test$type == "A", NA, "1")
I've written code in this case myself:
def chunk_ports(port_start, port_end, portions):
if port_end < port_start:
return None
total = port_end - port_start + 1
fractions = int(math.floor(float(total) / portions))
results = []
# No enough to chuck.
if fractions < 1:
return None
# Reverse, so any additional items would be in the first range.
_e = port_end
for i in range(portions, 0, -1):
print "i", i
if i == 1:
_s = port_start
else:
_s = _e - fractions + 1
results.append((_s, _e))
_e = _s - 1
results.reverse()
return results
divide_ports(1, 10, 9) would return
[(1, 2), (3, 3), (4, 4), (5, 5), (6, 6), (7, 7), (8, 8), (9, 9), (10, 10)]
By default cron logs to /var/log/syslog so you can see cron related entries by using:
grep CRON /var/log/syslog
https://askubuntu.com/questions/56683/where-is-the-cron-crontab-log
Make the DropDownStyle to DropDownList
stateComboBox.DropDownStyle = ComboBoxStyle.DropDownList;
You might want to use encodeURIComponent().
encodeURIComponent(""Busola""); // => %26quot%3BBusola%26quot%3B
At the time of my writing this answer, the accepted answer to this question appears to state that browsers are not required to delete a cookie when receiving a replacement cookie whose Expires
value is in the past. That claim is false. Setting Expires
to be in the past is the standard, spec-compliant way of deleting a cookie, and user agents are required by spec to respect it.
Using an Expires
attribute in the past to delete a cookie is correct and is the way to remove cookies dictated by the spec. The examples section of RFC 6255 states:
Finally, to remove a cookie, the server returns a Set-Cookie header with an expiration date in the past. The server will be successful in removing the cookie only if the Path and the Domain attribute in the Set-Cookie header match the values used when the cookie was created.
The User Agent Requirements section includes the following requirements, which together have the effect that a cookie must be immediately expunged if the user agent receives a new cookie with the same name whose expiry date is in the past
If [when receiving a new cookie] the cookie store contains a cookie with the same name, domain, and path as the newly created cookie:
- ...
- ...
- Update the creation-time of the newly created cookie to match the creation-time of the old-cookie.
- Remove the old-cookie from the cookie store.
Insert the newly created cookie into the cookie store.
A cookie is "expired" if the cookie has an expiry date in the past.
The user agent MUST evict all expired cookies from the cookie store if, at any time, an expired cookie exists in the cookie store.
Points 11-3, 11-4, and 12 above together mean that when a new cookie is received with the same name, domain, and path, the old cookie must be expunged and replaced with the new cookie. Finally, the point below about expired cookies further dictates that after that is done, the new cookie must also be immediately evicted. The spec offers no wiggle room to browsers on this point; if a browser were to offer the user the option to disable cookie expiration, as the accepted answer suggests some browsers do, then it would be in violation of the spec. (Such a feature would also have little use, and as far as I know it does not exist in any browser.)
Why, then, did the OP of this question observe this approach failing? Though I have not dusted off a copy of Internet Explorer to check its behaviour, I suspect it was because the OP's Expires
value was malformed! They used this value:
expires=Thu, Jan 01 1970 00:00:00 UTC;
However, this is syntactically invalid in two ways.
The syntax section of the spec dictates that the value of the Expires
attribute must be a
rfc1123-date, defined in [RFC2616], Section 3.3.1
Following the second link above, we find this given as an example of the format:
Sun, 06 Nov 1994 08:49:37 GMT
and find that the syntax definition...
requires that dates be written in day month year format, not month day year format as used by the question asker.
Specifically, it defines rfc1123-date
as follows:
rfc1123-date = wkday "," SP date1 SP time SP "GMT"
and defines date1
like this:
date1 = 2DIGIT SP month SP 4DIGIT
; day month year (e.g., 02 Jun 1982)
and
doesn't permit UTC
as a timezone.
The spec contains the following statement about what timezone offsets are acceptable in this format:
All HTTP date/time stamps MUST be represented in Greenwich Mean Time (GMT), without exception.
What's more if we dig deeper into the original spec of this datetime format, we find that in its initial spec in https://tools.ietf.org/html/rfc822, the Syntax section lists "UT" (meaning "universal time") as a possible value, but does not list not UTC (Coordinated Universal Time) as valid. As far as I know, using "UTC" in this date format has never been valid; it wasn't a valid value when the format was first specified in 1982, and the HTTP spec has adopted a strictly more restrictive version of the format by banning the use of all "zone" values other than "GMT".
If the question asker here had instead used an Expires
attribute like this, then:
expires=Thu, 01 Jan 1970 00:00:00 GMT;
then it would presumably have worked.
I'm also in a "trial and error" for that, but this answer from Google Chrome Labs' Github helped me a little. I defined it into my main file and it worked - well, for only one third-party domain. Still making tests, but I'm eager to update this answer with a better solution :)
EDIT: I'm using PHP 7.4 now, and this syntax is working good (Sept 2020):
$cookie_options = array(
'expires' => time() + 60*60*24*30,
'path' => '/',
'domain' => '.domain.com', // leading dot for compatibility or use subdomain
'secure' => true, // or false
'httponly' => false, // or false
'samesite' => 'None' // None || Lax || Strict
);
setcookie('cors-cookie', 'my-site-cookie', $cookie_options);
If you have PHP 7.2 or lower (as Robert's answered below):
setcookie('key', 'value', time()+(7*24*3600), "/; SameSite=None; Secure");
If your host is already updated to PHP 7.3, you can use (thanks to Mahn's comment):
setcookie('cookieName', 'cookieValue', [
'expires' => time()+(7*24*3600,
'path' => '/',
'domain' => 'domain.com',
'samesite' => 'None',
'secure' => true,
'httponly' => true
]);
Another thing you can try to check the cookies, is to enable the flag below, which—in their own words—"will add console warning messages for every single cookie potentially affected by this change":
chrome://flags/#cookie-deprecation-messages
See the whole code at: https://github.com/GoogleChromeLabs/samesite-examples/blob/master/php.md, they have the code for same-site-cookies
too.
Yes there is retainAll
check out this
Set<Type> intersection = new HashSet<Type>(s1);
intersection.retainAll(s2);
My favourite answer so far is coloredEcho.
Just to post another option, you can check out this little tool xcol
https://ownyourbits.com/2017/01/23/colorize-your-stdout-with-xcol/
you use it just like grep, and it will colorize its stdin with a different color for each argument, for instance
sudo netstat -putan | xcol httpd sshd dnsmasq pulseaudio conky tor Telegram firefox "[[:digit:]]+\.[[:digit:]]+\.[[:digit:]]+\.[[:digit:]]+" ":[[:digit:]]+" "tcp." "udp." LISTEN ESTABLISHED TIME_WAIT
Note that it accepts any regular expression that sed will accept.
This tool uses the following definitions
#normal=$(tput sgr0) # normal text
normal=$'\e[0m' # (works better sometimes)
bold=$(tput bold) # make colors bold/bright
red="$bold$(tput setaf 1)" # bright red text
green=$(tput setaf 2) # dim green text
fawn=$(tput setaf 3); beige="$fawn" # dark yellow text
yellow="$bold$fawn" # bright yellow text
darkblue=$(tput setaf 4) # dim blue text
blue="$bold$darkblue" # bright blue text
purple=$(tput setaf 5); magenta="$purple" # magenta text
pink="$bold$purple" # bright magenta text
darkcyan=$(tput setaf 6) # dim cyan text
cyan="$bold$darkcyan" # bright cyan text
gray=$(tput setaf 7) # dim white text
darkgray="$bold"$(tput setaf 0) # bold black = dark gray text
white="$bold$gray" # bright white text
I use these variables in my scripts like so
echo "${red}hello ${yellow}this is ${green}coloured${normal}"
By using jquery ajax you can reload your page
$.ajax({
type: "POST",
url: "packtypeAdd.php",
data: infoPO,
success: function() {
location.reload();
}
});
Probably the best way to do it is using 'awk' tool which will generate output into one line
$ awk ' /pattern/ {print}' ORS=' ' /path/to/file
It will merge all lines into one with space delimiter
The "selected" answer didn't work for me. I'm using rails 3.1 with CouchRest::Model (based on Active Model). The _changed?
methods don't return true for changed attributes in the after_update
hook, only in the before_update
hook. I was able to get it to work using the (new?) around_update
hook:
class SomeModel < ActiveRecord::Base
around_update :send_notification_after_change
def send_notification_after_change
should_send_it = self.published_changed? && self.published == true
yield
Notification.send(...) if should_send_it
end
end
url-pattern
is used in web.xml
to map your servlet
to specific URL. Please see below xml code, similar code you may find in your web.xml
configuration file.
<servlet>
<servlet-name>AddPhotoServlet</servlet-name> //servlet name
<servlet-class>upload.AddPhotoServlet</servlet-class> //servlet class
</servlet>
<servlet-mapping>
<servlet-name>AddPhotoServlet</servlet-name> //servlet name
<url-pattern>/AddPhotoServlet</url-pattern> //how it should appear
</servlet-mapping>
If you change url-pattern
of AddPhotoServlet
from /AddPhotoServlet
to /MyUrl
. Then, AddPhotoServlet
servlet can be accessible by using /MyUrl
. Good for the security reason, where you want to hide your actual page URL.
Java Servlet url-pattern
Specification:
- A string beginning with a '/' character and ending with a '/*' suffix is used for path mapping.
- A string beginning with a '*.' prefix is used as an extension mapping.
- A string containing only the '/' character indicates the "default" servlet of the application. In this case the servlet path is the request URI minus the context path and the path info is null.
- All other strings are used for exact matches only.
Reference : Java Servlet Specification
You may also read this Basics of Java Servlet
I posted this already at some other websites and though why not share it with guys/gals at stackoverflow.
Hit Details?
_needsAggregate
_needsCoapp
actions
bitrate
chunked
descrPrefix
durationFloat
extension
frameId
fromCache
group
hls
id
isPrivate
length
masterManifest
mediaManifest
originalId
referrer
size
status
title
topUrl
url
urlFilename
I have faced same problem, and here is, how i solved the problem. Hope this will be helpful for someone.
// Swift 2
lblMultiline.lineBreakMode = .ByWordWrapping // or use NSLineBreakMode.ByWordWrapping
lblMultiline.numberOfLines = 0
// Objective-C
lblMultiline.lineBreakMode = NSLineBreakByWordWrapping;
lblMultiline.numberOfLines = 0;
// C# (Xamarin.iOS)
lblMultiline.LineBreakMode = UILineBreakMode.WordWrap;
lblMultiline.Lines = 0;
To get a better understanding on it, one must see the architecture of Selenium WebDriver.
Just visit https://github.com/SeleniumHQ/selenium/wiki/JsonWireProtocol
and search for "Navigate to a new URL." text. You will see both methods GET and POST.
Hence the conclusion given below:
driver.get() method internally sends Get request to Selenium Server Standalone. Whereas driver.navigate() method sends Post request to Selenium Server Standalone.
Hope it helps
var name = 'john';
document.write(name);
it will write the variable you have declared upper
Applying the input-block-level
class works great for me, across various screen widths. It is defined by Bootstrap in mixins.less
as follows:
// Block level inputs
.input-block-level {
display: block;
width: 100%;
min-height: 28px; // Make inputs at least the height of their button counterpart
.box-sizing(border-box); // Makes inputs behave like true block-level elements
}
This is very similar to the style suggested by 'assembler' in his comment on issue #1058.