add to pom:

        <build>
            <sourceDirectory>${basedir}/src</sourceDirectory>
            <testSourceDirectory>${basedir}/test</testSourceDirectory>
             (...)
            <plugins>
                (...)
            </plugins>
        </build>

Use %in% as follows

A$C %in% B$C

Which will tell you which values of column C of A are in B.

What is returned is a logical vector. In the specific case of your example, you get:

A$C %in% B$C
# [1]  TRUE FALSE  TRUE  TRUE

Which you can use as an index to the rows of A or as an index to A$C to get the actual values:

# as a row index
A[A$C %in% B$C,  ]  # note the comma to indicate we are indexing rows

# as an index to A$C
A$C[A$C %in% B$C]
[1] 1 3 4  # returns all values of A$C that are in B$C

We can negate it too:

A$C[!A$C %in% B$C]
[1] 2   # returns all values of A$C that are NOT in B$C

  2 %in% B$C   # "is the value 2 in B$C ?"  
  # FALSE

  A$C[2] %in% B$C  # "is the 2nd element of A$C in B$C ?"  
  # FALSE

In todays JavaScript, this will work as well..

const getBase64FromUrl = async (url) => {
  const data = await fetch(url);
  const blob = await data.blob();
  return new Promise((resolve) => {
    const reader = new FileReader();
    reader.readAsDataURL(blob); 
    reader.onloadend = function() {
      const base64data = reader.result;   
      resolve(base64data);
    }
  });
}

getBase64FromUrl('https://lh3.googleusercontent.com/i7cTyGnCwLIJhT1t2YpLW-zHt8ZKalgQiqfrYnZQl975-ygD_0mOXaYZMzekfKW_ydHRutDbNzeqpWoLkFR4Yx2Z2bgNj2XskKJrfw8').then(console.log)

There are two different notations to access object properties

• Dot notation: myObj.prop1
• Bracket notation: myObj["prop1"]

Dot notation is fast and easy but you must use the actual property name explicitly. No substitution, variables, etc.

Bracket notation is open ended. It uses a string but you can produce the string using any legal js code. You may specify the string as literal (though in this case dot notation would read easier) or use a variable or calculate in some way.

So, these all set the myObj property named prop1 to the value Hello:

// quick easy-on-the-eye dot notation
myObj.prop1 = "Hello";

// brackets+literal
myObj["prop1"] = "Hello";

// using a variable
var x = "prop1"; 
myObj[x] = "Hello";                     

// calculate the accessor string in some weird way
var numList = [0,1,2];
myObj[ "prop" + numList[1] ] = "Hello";     

Pitfalls:

myObj.[xxxx] = "Hello";      // wrong: mixed notations, syntax fail
myObj[prop1] = "Hello";      // wrong: this expects a variable called prop1

tl;dnr: If you want to compute or reference the key you must use bracket notation. If you are using the key explicitly, then use dot notation for simple clear code.

Note: there are some other good and correct answers but I personally found them a bit brief coming from a low familiarity with JS on-the-fly quirkiness. This might be useful to some people.

You should have a look into JSON-P - that was a perfect solution for me when I had that problem:

https://en.wikipedia.org/wiki/JSONP

You basically define a javascript file that loads all your data and another javascript file that processes and displays it. That gets rid of the ugly scrollbar of iframes.

My +1 to mata's comment at https://stackoverflow.com/a/10561979/1346705 and to the Nick Craig-Wood's demonstration. You have decoded the string correctly. The problem is with the print command as it converts the Unicode string to the console encoding, and the console is not capable to display the string. Try to write the string into a file and look at the result using some decent editor that supports Unicode:

import codecs

s = '(\xef\xbd\xa1\xef\xbd\xa5\xcf\x89\xef\xbd\xa5\xef\xbd\xa1)\xef\xbe\x89'
s1 = s.decode('utf-8')
f = codecs.open('out.txt', 'w', encoding='utf-8')
f.write(s1)
f.close()

Then you will see (?????)?.

Add this to html:

<svg id="mySVG" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink"/>

Try this function and adapt for you program:

var svgNS = "http://www.w3.org/2000/svg";  

function createCircle()
{
    var myCircle = document.createElementNS(svgNS,"circle"); //to create a circle. for rectangle use "rectangle"
    myCircle.setAttributeNS(null,"id","mycircle");
    myCircle.setAttributeNS(null,"cx",100);
    myCircle.setAttributeNS(null,"cy",100);
    myCircle.setAttributeNS(null,"r",50);
    myCircle.setAttributeNS(null,"fill","black");
    myCircle.setAttributeNS(null,"stroke","none");

    document.getElementById("mySVG").appendChild(myCircle);
}     

Use the exp1 if cond else exp2 syntax.

rate = lambda T: 200*exp(-T) if T>200 else 400*exp(-T)

Note you don't use return in lambda expressions.

You shouldn't raise the warning, you should be using warnings module. By raising it you're generating error, rather than warning.

I work with non-programmers who like a simple solution:

import code
code.interact(banner='Paused. Press ^D (Ctrl+D) to continue.', local=globals()) 

This produces an interpreter that acts almost exactly like the real interpreter, including the current context, with only the output:

Paused. Press ^D (Ctrl+D) to continue.
>>>

The Python Debugger is also a good way to pause.

import pdb
pdb.set_trace() # Python 2

or

breakpoint() # Python 3

If this helps. Add the following property with value to your selector:

white-space: pre-wrap;

Few things I want to mention is that I'm using mysql package for making a connection with my database and what you saw below is working code and written for insert bulk query.

const values = [
  [1, 'DEBUG', 'Something went wrong. I have to debug this.'],
  [2, 'INFO', 'This just information to end user.'],
  [3, 'WARNING', 'Warning are really helping users.'],
  [4, 'SUCCESS', 'If everything works then your request is successful']
];

const query = "INSERT INTO logs(id, type, desc) VALUES ?";

const query = connection.query(query, [values], function(err, result) {
  if (err) {
    console.log('err', err)
  }

  console.log('result', result)
});

This sounds like an output formatting issue? If using SQL Plus, use the COLUMN command like this (assuming you want a maximum display width of 20 chars for each):

column a format a20
column b format a20
select a, b from mytable;

I'd agree it is interesting to propose a particular style of working. However, unless I have the chance to set the style, I usually follow what's been done for consistency.

Taking a look at the Linux Kernel Commits, the project that started git if you like, http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=bca476139d2ded86be146dae09b06e22548b67f3, they don't follow the 50/72 rule. The first line is 54 characters.

I would say consistency matters. Set up proper means of identifying users who've made commits (user.name, user.email - especially on internal networks. User@OFFICE-1-PC-10293982811111 isn't a useful contact address). Depending on the project, make the appropriate detail available in the commit. It's hard to say what that should be; it might be tasks completed in a development process, then details of what's changed.

I don't believe users should use git one way because certain interfaces to git treat the commits in certain ways.

I should also note there are other ways to find commits. For a start, git diff will tell you what's changed. You can also do things like git log --pretty=format:'%T %cN %ce' to format the options of git log.

Kos's answer is almost right, but can have damaging side effects. This is more correct:

#myTable tr td:nth-child(1), #myTable th:nth-child(1) {
    display: none;
}

CSS (Cascading Style Sheets) will cascade attributes to all of its children. This means that *:nth-child(1) will hide the first td of each tr AND hide the first element of all td children. If any of your td have things like buttons, icons, inputs, or selects, the first one will be hidden (woops!).

Even if you don't currently have things that will be hidden, image your frustration down the road if you need to add one. Don't punish your future self like that, that's going to be a pain to debug!

My answer will only hide the first td and th on all tr in #myTable keeping your other elements safe.

Sometimes df.name doesn't work.

you might get an error message:

'DataFrame' object has no attribute 'name'

try the below function:

def get_df_name(df):
    name =[x for x in globals() if globals()[x] is df][0]
    return name

public static void WriteLine(this List<int> theList)
{
  foreach (int i in list)
  {
    Console.Write("{0}\t", t.ToString());
  }
  Console.WriteLine();
}

Then, later...

list.WriteLine();

The accepted solution does not work when there are multiple different timezones in a Series. It throws ValueError: Tz-aware datetime.datetime cannot be converted to datetime64 unless utc=True

The solution is to use the apply method.

Please see the examples below:

# Let's have a series `a` with different multiple timezones. 
> a
0    2019-10-04 16:30:00+02:00
1    2019-10-07 16:00:00-04:00
2    2019-09-24 08:30:00-07:00
Name: localized, dtype: object

> a.iloc[0]
Timestamp('2019-10-04 16:30:00+0200', tz='Europe/Amsterdam')

# trying the accepted solution
> a.dt.tz_localize(None)
ValueError: Tz-aware datetime.datetime cannot be converted to datetime64 unless utc=True

# Make it tz-naive. This is the solution:
> a.apply(lambda x:x.tz_localize(None))
0   2019-10-04 16:30:00
1   2019-10-07 16:00:00
2   2019-09-24 08:30:00
Name: localized, dtype: datetime64[ns]

# a.tz_convert() also does not work with multiple timezones, but this works:
> a.apply(lambda x:x.tz_convert('America/Los_Angeles'))
0   2019-10-04 07:30:00-07:00
1   2019-10-07 13:00:00-07:00
2   2019-09-24 08:30:00-07:00
Name: localized, dtype: datetime64[ns, America/Los_Angeles]

You can replace the special characters with the desired characters as follows,

import string
specialCharacterText = "H#y #@w @re &*)?"
inCharSet = "!@#$%^&*()[]{};:,./<>?\|`~-=_+\""
outCharSet = "                               " #corresponding characters in inCharSet to be replaced
splCharReplaceList = string.maketrans(inCharSet, outCharSet)
splCharFreeString = specialCharacterText.translate(splCharReplaceList)

Simple run your project online i.e mvn clean install . It fetches all the latest dependencies that you mention in your pom.xml and built the project

Try something like this:

yourControl.DataSource = countryInstance.Cities;

And if you are using WebForms you will need to add this line:

yourControl.DataBind();

The value you have passed as the file descriptor is not valid. It is either negative or does not represent a currently open file or socket.

So you have either closed the socket before calling write() or you have corrupted the value of 'sockfd' somewhere in your code.

It would be useful to trace all calls to close(), and the value of 'sockfd' prior to the write() calls.

Your technique of only printing error messages in debug mode seems to me complete madness, and in any case calling another function between a system call and perror() is invalid, as it may disturb the value of errno. Indeed it may have done so in this case, and the real underlying error may be different.

/**
 * @param num The number to round
 * @param precision The number of decimal places to preserve
 */
function roundUp(num, precision) {
  precision = Math.pow(10, precision)
  return Math.ceil(num * precision) / precision
}

roundUp(192.168, 1) //=> 192.2

This I found an ideal solution for copying file from Ansible server to remote.

copying yaml file

- hosts: localhost
  user: {{ user }}
  connection: ssh
  become: yes
  gather_facts: no
  tasks:
   - name: Creation of directory on remote server
     file:
       path: /var/lib/jenkins/.aws
       state: directory
       mode: 0755
     register: result
   - debug: 
       var: result

   - name: get file names to copy
     command: "find conf/.aws -type f"
     register: files_to_copy

   - name: copy files
     copy:
      src: "{{ item }}" 
      dest: "/var/lib/jenkins/.aws"
      owner: {{ user }}
      group: {{ group }}
      remote_src: True
      mode: 0644
     with_items:
      - "{{ files_to_copy.stdout_lines }}"

In the last version of spring boot 2.1.1.RELEASE, it is simple as :

@RunWith(SpringRunner.class)
@SpringBootTest(classes = SampleApplication.class)
public class CustomerRepositoryIntegrationTest {

    @Autowired
    CustomerRepository repository;

    @Test
    public void myTest() throws Exception {

        Customer customer = new Customer();
        customer.setId(100l);
        customer.setFirstName("John");
        customer.setLastName("Wick");

        repository.save(customer);

        List<?> queryResult = repository.findByLastName("Wick");

        assertFalse(queryResult.isEmpty());
        assertNotNull(queryResult.get(0));
    }
}

Complete code:

https://github.com/jrichardsz/spring-boot-templates/blob/master/003-hql-database-with-integration-test/src/test/java/test/CustomerRepositoryIntegrationTest.java

Use this

import data from './customData.json';

No, but you could have something like:

bool b;
b = b.YourExtensionMethod();

Variable i is your looking key name.

First of all, 2 thing that we need to understand

Client

• it make request to specific server

  bindService(new 
      Intent("com.android.vending.billing.InAppBillingService.BIND"),
          mServiceConn, Context.BIND_AUTO_CREATE);`
  

here mServiceConn is instance of ServiceConnection class(inbuilt) it is actually interface that we need to implement with two (1st for network connected and 2nd network not connected) method to monitor network connection state.

Server

• It handle the request of client and make replica of it's own which is private to client only who send request and this replica of server runs on different thread.

Now at client side, how to access all the method of server?

• server send response with IBind Object.so IBind object is our handler which access all the method of service by using (.) operator.

  MyService myService;
  public ServiceConnection myConnection = new ServiceConnection() {
      public void onServiceConnected(ComponentName className, IBinder binder) {
          Log.d("ServiceConnection","connected");
          myService = binder;
      }
      //binder comes from server to communicate with method's of 
  
      public void onServiceDisconnected(ComponentName className) {
          Log.d("ServiceConnection","disconnected");
          myService = null;
      }
  }
  

now how to call method which lies in service

myservice.serviceMethod();

here myService is object and serviceMethode is method in service. And by this way communication is established between client and server.

I found the problem. This code was placed in a separate file that was added with a php include() function. And this include was happening before the Bootstrap files were loaded. So the Bootstrap JS file was not loaded yet, causing this modal to not do anything.

With the above code sample is nothing wrong and works as intended when placed in the body part of a html page.

<script type="text/javascript">
$('#memberModal').modal('show');
</script>

I found a solution for how to set a global variable in a mailinglist posting via assign:

a <- "old"
test <- function () {
   assign("a", "new", envir = .GlobalEnv)
}
test()
a  # display the new value

How about trying this?

public static void main (String [] args)
{
   int [] [] listTwo = new int [5][5];
    // 2 Dimensional array 
    int x = 0;
    int y = 0;
    while (x < 5) {
        listTwo[x][y] = (int)(Math.random()*10);

        while (y <5){
            listTwo [x] [y] = (int)(Math.random()*10);
            System.out.print(listTwo[x][y]+" | ");
            y++;                
        }
        System.out.println("");
        y=0;
        x++;
    }
}

But be aware that old browsers doesn't support getElementsByClassName.

Then, you can do

function getElementsByClassName(c,el){
    if(typeof el=='string'){el=document.getElementById(el);}
    if(!el){el=document;}
    if(el.getElementsByClassName){return el.getElementsByClassName(c);}
    var arr=[],
        allEls=el.getElementsByTagName('*');
    for(var i=0;i<allEls.length;i++){
        if(allEls[i].className.split(' ').indexOf(c)>-1){arr.push(allEls[i])}
    }
    return arr;
}
getElementsByClassName('4','test')[0];

It seems it works, but be aware that an HTML class

• Must begin with a letter: A-Z or a-z
• Can be followed by letters (A-Za-z), digits (0-9), hyphens ("-"), and underscores ("_")

I weird bug* in visual studio 2010, if you put controls inside a Placeholder it does not render them in design view mode.

This is especially true for Hidenfields and Empty labels.

I would love to use placeholders instead of panels but I hate the fact I cant put other controls inside placeholders at design time in the GUI.

In your example, the TMP variable is set (and the temporary directory created) whenever the rules for out.tar are evaluated. In order to create the directory only when out.tar is actually fired, you need to move the directory creation down into the steps:

out.tar : 
    $(eval TMP := $(shell mktemp -d))
    @echo hi $(TMP)/hi.txt
    tar -C $(TMP) cf $@ .
    rm -rf $(TMP)

The eval function evaluates a string as if it had been typed into the makefile manually. In this case, it sets the TMP variable to the result of the shell function call.

edit (in response to comments):

To create a unique variable, you could do the following:

out.tar : 
    $(eval $@_TMP := $(shell mktemp -d))
    @echo hi $($@_TMP)/hi.txt
    tar -C $($@_TMP) cf $@ .
    rm -rf $($@_TMP)

This would prepend the name of the target (out.tar, in this case) to the variable, producing a variable with the name out.tar_TMP. Hopefully, that is enough to prevent conflicts.

Interesting message here. Operating Systems are smart enough to deny remote connections if your private key is too open. It understands the risk where permissions for id_rsa is wide open (read, is editable by anyone).

{One may change your lock first and then open it with the keys he already has}

cd ~/.ssh
chmod 400 id_rsa

While working on the multiple servers (non-production), most of us feel need to connect remote server with ssh. A good idea is to have a piece of application level code (may be java using jsch) to create ssh trusts between servers. This way connection will be password-less. Incase, perl is installed - one may use net ssh module too.

This can be done in one line with lodash _.tail:

var arr = ["item 1", "item 2", "item 3", "item 4"];_x000D_
console.log(_.tail(arr));

<script src="https://cdnjs.cloudflare.com/ajax/libs/lodash.js/4.17.11/lodash.min.js"></script>

You can use the extension method AsEnumerable in Assembly System.Core and System.Linq namespace :

List<Book> list = new List<Book>();
return list.AsEnumerable();

This will, as said on this MSDN link change the type of the List in compile-time. This will give you the benefits also to only enumerate your collection we needed (see MSDN example for this).

Please look at http://www.tldp.org/LDP/abs/html/parameter-substitution.html for examples

${parameter-default}, ${parameter:-default}

If parameter not set, use default. After the call, parameter is still not set.
Both forms are almost equivalent. The extra : makes a difference only when parameter has been declared, but is null.

unset EGGS
echo 1 ${EGGS-spam}   # 1 spam
echo 2 ${EGGS:-spam}  # 2 spam

EGGS=
echo 3 ${EGGS-spam}   # 3
echo 4 ${EGGS:-spam}  # 4 spam

EGGS=cheese
echo 5 ${EGGS-spam}   # 5 cheese
echo 6 ${EGGS:-spam}  # 6 cheese

${parameter=default}, ${parameter:=default}

If parameter not set, set parameter value to default.
Both forms nearly equivalent. The : makes a difference only when parameter has been declared and is null

# sets variable without needing to reassign
# colons suppress attempting to run the string
unset EGGS
: ${EGGS=spam}
echo 1 $EGGS     # 1 spam
unset EGGS
: ${EGGS:=spam}
echo 2 $EGGS     # 2 spam

EGGS=
: ${EGGS=spam}
echo 3 $EGGS     # 3        (set, but blank -> leaves alone)
EGGS=
: ${EGGS:=spam}
echo 4 $EGGS     # 4 spam

EGGS=cheese
: ${EGGS:=spam}
echo 5 $EGGS     # 5 cheese
EGGS=cheese
: ${EGGS=spam}
echo 6 $EGGS     # 6 cheese

${parameter+alt_value}, ${parameter:+alt_value}

If parameter set, use alt_value, else use null string. After the call, parameter value not changed.
Both forms nearly equivalent. The : makes a difference only when parameter has been declared and is null

unset EGGS
echo 1 ${EGGS+spam}  # 1
echo 2 ${EGGS:+spam} # 2

EGGS=
echo 3 ${EGGS+spam}  # 3 spam
echo 4 ${EGGS:+spam} # 4

EGGS=cheese
echo 5 ${EGGS+spam}  # 5 spam
echo 6 ${EGGS:+spam} # 6 spam

use coalesce

COALESCE(value [, ...])

The COALESCE function returns the first of its arguments that is not null.  
Null is returned only if all arguments are null. It is often
used to substitute a default value for null values when data is
retrieved for display.

Edit

Here's an example of COALESCE with your query:

SELECT AVG( price )
FROM(
      SELECT *, cume_dist() OVER ( ORDER BY price DESC ) FROM web_price_scan
      WHERE listing_Type = 'AARM'
        AND u_kbalikepartnumbers_id = 1000307
        AND ( EXTRACT( DAY FROM ( NOW() - dateEnded ) ) ) * 24 < 48
        AND COALESCE( price, 0 ) > ( SELECT AVG( COALESCE( price, 0 ) )* 0.50
                                     FROM ( SELECT *, cume_dist() OVER ( ORDER BY price DESC )
                                           FROM web_price_scan
                                           WHERE listing_Type='AARM'
                                             AND u_kbalikepartnumbers_id = 1000307
                                             AND ( EXTRACT( DAY FROM ( NOW() - dateEnded ) ) ) * 24 < 48
                                         ) g
                                    WHERE cume_dist < 0.50
                                  )
        AND COALESCE( price, 0 ) < ( SELECT AVG( COALESCE( price, 0 ) ) *2
                                     FROM( SELECT *, cume_dist() OVER ( ORDER BY price desc )
                                           FROM web_price_scan
                                           WHERE listing_Type='AARM'
                                             AND u_kbalikepartnumbers_id = 1000307
                                             AND ( EXTRACT( DAY FROM ( NOW() - dateEnded ) ) ) * 24 < 48
                                         ) d
                                     WHERE cume_dist < 0.50)
     )s
HAVING COUNT(*) > 5

IMHO COALESCE should not be use with AVG because it modifies the value. NULL means unknown and nothing else. It's not like using it in SUM. In this example, if we replace AVG by SUM, the result is not distorted. Adding 0 to a sum doesn't hurt anyone but calculating an average with 0 for the unknown values, you don't get the real average.

In that case, I would add price IS NOT NULL in WHERE clause to avoid these unknown values.

Use chunk from lodash

lodash.chunk(arr,<size>).forEach(chunk=>{
  console.log(chunk);
})

If you want to turn off app verification programmatically, you can do so with the following code:

boolean success = true;
boolean enabled = Settings.Secure.getInt(context.getContentResolver(), "package_verifier_enable", 1) == 1;
if (enabled) {
    success = Settings.Secure.putString(context.getContentResolver(), "package_verifier_enable", "0");
}

You will also need the following system permissions:

<uses-permission android:name="android.permission.WRITE_SETTINGS" />
<uses-permission android:name="android.permission.WRITE_SECURE_SETTINGS" />

Also worth noting is that the "package_verifier_enable" string comes from the Settings.Glabal.PACKAGE_VERIFIER_ENABLE member which seems to be inaccessible.

Mongo Installation Process in Windows

Are you ready for the installation … and use … Technically, it’s not an installation it’s just Downloading…

I. Download the zip file http://www.mongodb.org/downloads

II. Extract it and copy the files into your desired location.

III. Start the DB engine.

IV. Test the installation and use it.

That's it! So simple, right? Ok let’s start

1. Download the zip file

1. Go to http://www.mongodb.org/downloads

2. You will see a screen like this: I am using a windows 7 32 bit machine - that’s why I downloaded the package marked in red.

3. Click download (It only takes a few seconds).
   Wow... I got that downloaded. It was a zipped file called mongodb-win32-i386-2.4.4.zip (The name of the folder will change according to the version you download, here I got version 2.4.4).

OK all set.

2. Extract

1. Extract the zip
2. Copy the files into a desired location in your machine.
   • I am going to copy the extracted files to my D drive, since I don’t have many files there.
   • Alright then where are you planning to paste the mongo files? In C: or in your Desktop itself?
   • Ok, no matter where you paste... In the snap shot below, you can see that I have navigated to the bin folder inside the Mongo folder. I count fifteen files inside bin. What about you?

Finished! That’s all

What we have to do next?

3. Start the DB engine

Let’s go and start using our mongo db...

1. Open up a command prompt, then navigate to bin in the mongo folder

2. Type mongo.exe (which is the command used to start mongo Db Power shell). Then see the below response.. That was an awesome exception J LOL … What is that?

   Couldn’t connect to server.

   Why did the exception happen? I have no idea... Did I create a server in between?

   No.

   Right, then how come it connected to a server in between? Silly Machine …Jz.

   I got it! Like all other DBs - we have to start the DB engine before we use it.

   So, how can we start it?

3. We have to start the mongo db by using the command mongod. Execute this from the bin folder of mongo.

   Let’s see what had happened.

   

   Again a wonderfully formatted exception J we got right? Did you notice what I have highlighted on top? Yeah it is the mongod command. The second one is the exception asking us to create a folder called data. And, inside the data folder, a folder called db.

   So we have to create these data\db folders.

   The next question is where to create these folders?

4. We have to create the data\db folders in the C drive of our BOX in which we are installing mongo. Let’s go and create the folder structure in C drive.

   A question arises here: "Is it mandatory to create the data\db directories inside C?" Nooo, not really. Mongo looks in C by default for this folder, but you can create them wherever you want. However, if it's not in C, you have to tell mongo where it is.

   In other words, if you don't want the mongo databases to be on C:\, you have to set the db path for mongo.exe.

   Optional

   • Ok, I will create those folders in some other location besides C for better understanding of this option. I will create then in the D drive root, with the help of cmd.

     Why? Because it’s an opportunity for us to remember the old dos commands...

     

   • The next step is to set the Db path to mongo.exe.

     Navigate back to bin, and enter the command, mongod.exe --dbpath d:\data.

     I got the response below:

     

     I Hope everything went well... Because I didn’t see any ERROR *** in the console J.

   Next, we can go and start the db using the command start mongo.exe

   

   I didn't see any error or warning messages. But, we have to supply a command to make sure mongo is up and running, i.e. mongod will get a response:

   

Hope everything went well.

4. Test the Mongo DB installation

Now we have to see our DB right? Yea very much, Otherwise how will we know it’s running?

For testing purpose MONGO has got a DB called test by default. Lets go query that.

But how without any management studios? Unlike SQL, we have to depend on the command prompt. Yes exactly the same command prompt… our good old command prompt… Heiiiii.. Don’t get afraid yes it’s our old command prompt only. Ok let’s go and see how we are going to use it…

Ohhh Nooo… don’t close the above Command prompt, leave it as it is…

1. Open a new cmd window.

2. Navigate to Bin as usual we do…

   I am sure you people may be remembering the old C programming which we have done on our college day’s right?

3. In the command prompt, execute the command mongo or mongo.exe again and see what happens.

   You will get a screen as shown below:

   

4. I mentioned before that Mongo has got a test db by default called test, try inserting a record into it.

   The next question here is "How will we insert?" Does mongo have SQL commands? No, mongo has got only commands to help with.

   The basic command to insert is
   db.test.save( { KodothTestField: ‘My name is Kodoth’ } )

   Where test is the DB and .save is the insert command. KodothTestField is the column or field name, and My name is Kodoth is the value.

5. Before talking more let’s check whether it’s stored or not by performing another command: db.test.find()

   

   Our Data got successfully inserted … Hurrayyyyyy..

   I know that you are thinking about the number which is displayed with every record right called ObjectId. It’s like a unique id field in SQL that auto-increments and all. Have a closer look you can see that the Object Id ends with 92, so it’s different for each and every record.

   At last we are successful in installing and verifying the MONGO right. Let’s have a party... So do you agree now MONGO is as Sweet as MANGO?

Also we have 3rd party tools to explore the MONGO. One is called MONGO VUE. Using this tool we can perform operations against the mongo DB like we use Management studio for SQL Server.

Can you just imagine an SQL server or Oracle Db with entirely different rows in same table? Is it possible in our relational DB table? This is how mongo works. I will show you how we can do that…

First I will show you how the data will look in a relational DB.

For example consider an Employee table and a Student table in relational way. The schemas would be entirely different right? Yes exactly…

Let us now see how it will look in Mongo DB. The above two tables are combined into single Collection in Mongo…

This is how Collections are stored in Mongo. I think now you can feel the difference really right? Every thing came under a single umbrella. This is not the right way but I just wanted to show you all how this happens that’s why I combined 2 entirely different tables in to one single Collection.

If you want to try out you can use below test scripts

*********************** 
TEST INSERT SCRIPT

*********EMPLOYEE****** 
db.test.save( { EmployeId: "1", EmployeFirstName: "Kodoth", EmployeLastName:"KodothLast", EmployeAge:"14" } )  
db.test.save( { EmployeId: "2", EmployeFirstName: "Kodoth 2", EmployeLastName:"Kodoth Last2", EmployeAge:"14" } )  
db.test.save( { EmployeId: "3", EmployeFirstName: "Kodoth 3", EmployeLastName:"Kodoth Last3", EmployeAge:"14" } ) 

******STUDENT****** 
db.test.save( { StudentId: "1", StudentName: "StudentName", StudentMark:"25" } )  
db.test.save( { StudentId: "2", StudentName: "StudentName 2", StudentMark:"26" } )  
db.test.save( {StudentId: "3", StudentName: "StudentName 3", StudentMark:"27"} )
************************

Thanks

Use the following in a stored procedure:

IF NOT EXISTS( SELECT NULL
            FROM INFORMATION_SCHEMA.COLUMNS
           WHERE table_name = 'tablename'
             AND table_schema = 'db_name'
             AND column_name = 'columnname')  THEN

  ALTER TABLE `TableName` ADD `ColumnName` int(1) NOT NULL default '0';

END IF;

For Apache HttpClient 4.4:

HttpClientBuilder b = HttpClientBuilder.create();

SSLContext sslContext = new SSLContextBuilder().loadTrustMaterial(null, new TrustStrategy() {
    public boolean isTrusted(X509Certificate[] arg0, String arg1) throws CertificateException {
        return true;
    }
}).build();
b.setSslcontext( sslContext);

// or SSLConnectionSocketFactory.getDefaultHostnameVerifier(), if you don't want to weaken
HostnameVerifier hostnameVerifier = SSLConnectionSocketFactory.ALLOW_ALL_HOSTNAME_VERIFIER;

SSLConnectionSocketFactory sslSocketFactory = new SSLConnectionSocketFactory(sslContext, hostnameVerifier);
Registry<ConnectionSocketFactory> socketFactoryRegistry = RegistryBuilder.<ConnectionSocketFactory>create()
        .register("http", PlainConnectionSocketFactory.getSocketFactory())
        .register("https", sslSocketFactory)
        .build();

// allows multi-threaded use
PoolingHttpClientConnectionManager connMgr = new PoolingHttpClientConnectionManager( socketFactoryRegistry);
b.setConnectionManager( connMgr);

HttpClient client = b.build();

This is extracted from our actual working implementation.

The other answers are popular, but for HttpClient 4.4 they don't work. I spent hours trying & exhausting possibilities, but there seems to have been extremely major API change & relocation at 4.4.

See also a slightly fuller explanation at: http://literatejava.com/networks/ignore-ssl-certificate-errors-apache-httpclient-4-4/

Hope that helps!

I solved the same error with the Path.Combine(MapPath()) to get the physical file path instead of the http:/// www one.

You just need to define in your bean where you need a different scope than default singleton scope except prototype. For example:

<bean id="shoppingCart" 
   class="com.xxxxx.xxxx.ShoppingCartBean" scope="session">
   <aop:scoped-proxy/> 
</bean>

Did you try to specify resource only in context.xml

<Resource name="jdbc/PollDatasource" auth="Container" type="javax.sql.DataSource"
driverClassName="org.apache.derby.jdbc.EmbeddedDriver"
url="jdbc:derby://localhost:1527/poll_database;create=true"
username="suhail" password="suhail"
maxActive="20" maxIdle="10" maxWait="-1" />

and remove <resource-ref> section from web.xml?

In one project I've seen configuration without <resource-ref> section in web.xml and it worked.

It's an educated guess, but I think <resource-ref> declaration of JNDI resource named jdbc/PollDatasource in web.xml may override declaration of resource with same name in context.xml and the declaration in web.xml is missing both driverClassName and url hence the NPEs for that properties.

I'm getting the same solution as @camino's comment on https://stackoverflow.com/a/19365454/10593190 and XavierStuvw's reply.

I got it to work (for installing ffmpeg) by simply reinstalling the whole thing from the beginning with all instances of $ ./configure replaced by $ ./configure --enable-shared (first make sure to delete all the folders and files including the .so files from the previous attempt).

Apparently this works because https://stackoverflow.com/a/13812368/10593190.

you can use your method by this way

var app = 'AirFare';
var d1 = new Date();
var d2 = new Date();

$http({
    url: '/api/apiControllerName/methodName',
    method: 'POST',
    params: {application:app, from:d1, to:d2},
    headers: { 'Content-Type': 'application/json;charset=utf-8' },
    //timeout: 1,
    //cache: false,
    //transformRequest: false,
    //transformResponse: false
}).then(function (results) {
    return results;
}).catch(function (e) {

});

This works for me. Will provide last day of given year and month:

var d = new Date(2012,02,0);
var n = d.getDate();
alert(n);

You can achieve this by implementing a new property called edgesForExtendedLayout in iOS7 SDK. Please add the following code to achieve this,

if ([self respondsToSelector:@selector(edgesForExtendedLayout)])
        self.edgesForExtendedLayout = UIRectEdgeNone;

You need to add the above in your -(void)viewDidLoad method.

iOS 7 brings several changes to how you layout and customize the appearance of your UI. The changes in view-controller layout, tint color, and font affect all the UIKit objects in your app. In addition, enhancements to gesture recognizer APIs give you finer grained control over gesture interactions.

Using View Controllers

In iOS 7, view controllers use full-screen layout. At the same time, iOS 7 gives you more granular control over the way a view controller lays out its views. In particular, the concept of full-screen layout has been refined to let a view controller specify the layout of each edge of its view.

The wantsFullScreenLayout view controller property is deprecated in iOS 7. If you currently specify wantsFullScreenLayout = NO, the view controller may display its content at an unexpected screen location when it runs in iOS 7.

To adjust how a view controller lays out its views, UIViewController provides the following properties:

• edgesForExtendedLayout

The edgesForExtendedLayout property uses the UIRectEdge type, which specifies each of a rectangle’s four edges, in addition to specifying none and all. Use edgesForExtendedLayout to specify which edges of a view should be extended, regardless of bar translucency. By default, the value of this property is UIRectEdgeAll.

• extendedLayoutIncludesOpaqueBars

If your design uses opaque bars, refine edgesForExtendedLayout by also setting the extendedLayoutIncludesOpaqueBars property to NO. (The default value of extendedLayoutIncludesOpaqueBars is NO.)

• automaticallyAdjustsScrollViewInsets

If you don’t want a scroll view’s content insets to be automatically adjusted, set automaticallyAdjustsScrollViewInsets to NO. (The default value of automaticallyAdjustsScrollViewInsets is YES.)

• topLayoutGuide, bottomLayoutGuide

The topLayoutGuide and bottomLayoutGuide properties indicate the location of the top or bottom bar edges in a view controller’s view. If bars should overlap the top or bottom of a view, you can use Interface Builder to position the view relative to the bar by creating constraints to the bottom of topLayoutGuide or to the top of bottomLayoutGuide. (If no bars should overlap the view, the bottom of topLayoutGuide is the same as the top of the view and the top of bottomLayoutGuide is the same as the bottom of the view.) Both properties are lazily created when requested.

Please refer, apple doc

Just use:

line-height:50px

Replace "50px" with the same height as your div.

Your solution is correct, but there is some redundancy in your regex.
The similar result can also be obtained from the following regex:

^([A-Z]{3})$

The {3} indicates that the [A-Z] must appear exactly 3 times.

Previous answers got you list of torch.Size Here is how to get list of ints

listofints = [int(x) for x in tensor.shape]

The first argument should be the path to the executable program. So

gdb progname 12271

I removed import android.R and added import android.support.v7.appcompat.*;

However this had to be done after importing appcompat by right click project and import

See the Express docs as well as the Node docs for https.createServer (which is what express recommends to use):

var privateKey = fs.readFileSync( 'privatekey.pem' );
var certificate = fs.readFileSync( 'certificate.pem' );

https.createServer({
    key: privateKey,
    cert: certificate
}, app).listen(port);

Other options for createServer are at: http://nodejs.org/api/tls.html#tls_tls_createserver_options_secureconnectionlistener

One sure is comparison of string. Difference between

String helloWorld = "Hello World";
helloWorld == "Hello World";
"Hello World".equals(helloWorld);

New is always used to allocate dynamic memory, which then has to be freed.

By doing the first option, that memory will be automagically freed when scope is lost.

Point p1 = Point(0,0); //This is if you want to be safe and don't want to keep the memory outside this function.

Point* p2 = new Point(0, 0); //This must be freed manually. with...
delete p2;

This can a time consuming problem. For those who want to get on with their work because they do not want to waste much time, I would like to suggest that you download the zip file and unpack the zip file and use it. The zip file is available for all major OS.

https://www.eclipse.org/downloads/packages/

Here instead of hitting the Download button, which will download the Eclipse installer, scroll to the middle area where a list of the various Eclipse IDEs with their respective features are shown. Select the Eclipse IDE of your like and click on the link on the right-hand-side to download the zip or corresponding file for your OS version.

If you still want to use your other Eclipse installations because, for example, you have plugins installed, then download the Eclipse installer and on the right-hand top corner press the icon with 3 minus. After that press Update, then after restart, install the version of Eclipse IDE, which you want (the one that you want to reactivate) in a different folder. The installation will take some time. After the installation is finished you should be able to start your old Eclipse IDE.

For a fully transparent background use:

background: transparent;

Otherwise for a semi-transparent color fill use:

background: rgba(255,255,255,0.5); // or hsla(0, 0%, 100%, 0.5)

where the values are:

background: rgba(red,green,blue,opacity); // or hsla(hue, saturation, lightness, opacity)

You can also use rgba values for gradient backgrounds.

To get transparency on an image background simply reduce the opacity of the image in an image editor of you choice beforehand.

What do you actually want to achieve? What your code does is it tries to connect to a server located at 192.168.1.104:4000. Is this the address of a server that sends the messages (because this looks like a client-side code)? If I run fake server locally:

$ nc -l 4000

...and change socket address to localhost:4000, it will work and try to read something from nc-created server.

What you probably want is to create a ServerSocket and listen on it:

ServerSocket serverSocket = new ServerSocket(4000);
Socket socket = serverSocket.accept();

The second line will block until some other piece of software connects to your machine on port 4000. Then you can read from the returned socket. Look at this tutorial, this is actually a very broad topic (threading, protocols...)

I got the same exception. what i do to fix this is to pass instance of the dialog as parameter into function and use it instead of pass only context then using getContext(). this solution solve my problem, hope it can help

I describe two ways to do this, one based on data.table and the other based on reshape2 package . The data.table way already has an answer, but I have tried to make it cleaner and more detailed.

The data is like this:

 d <- structure(list(Name = structure(c(1L, 1L, 1L, 2L, 2L, 2L, 3L, 
3L, 3L), .Label = c("Aira", "Ben", "Cat"), class = "factor"), 
    Month = c(1L, 2L, 3L, 1L, 2L, 3L, 1L, 2L, 3L), Rate1 = c(12L, 
    18L, 19L, 53L, 22L, 19L, 22L, 67L, 45L), Rate2 = c(23L, 73L, 
    45L, 19L, 87L, 45L, 87L, 43L, 32L)), .Names = c("Name", "Month", 
"Rate1", "Rate2"), class = "data.frame", row.names = c(NA, -9L
))
head(d)
  Name Month Rate1 Rate2
1 Aira     1    12    23
2 Aira     2    18    73
3 Aira     3    19    45
4  Ben     1    53    19
5  Ben     2    22    87
6  Ben     3    19    45


library("reshape2")
mym <- melt(d, id = c("Name"))
res <- dcast(mym, Name ~ variable, mean)
res
#Name Month    Rate1    Rate2
#1 Aira     2 16.33333 47.00000
#2  Ben     2 31.33333 50.33333
#3  Cat     2 44.66667 54.00000

Using data.table:

# At first, I convert the data.frame to data.table and then I group it 
setDT(d)
d[, .(Rate1 = mean(Rate1), Rate2 = mean(Rate2)), by = .(Name)]
#   Name    Rate1    Rate2
#1: Aira 16.33333 47.00000
#2:  Ben 31.33333 50.33333
#3:  Cat 44.66667 54.00000

There is another way of doing it by avoiding to write many argument for j in data.table using a .SD

d[, lapply(.SD, mean), by = .(Name)]
#   Name Month    Rate1    Rate2
#1: Aira     2 16.33333 47.00000
#2:  Ben     2 31.33333 50.33333
#3:  Cat     2 44.66667 54.00000

if we only want to have Rate1 and Rate2 then we can use the .SDcols as follows:

d[, lapply(.SD, mean), by = .(Name), .SDcols = 3:4]
#  Name    Rate1    Rate2
#1: Aira 16.33333 47.00000
#2:  Ben 31.33333 50.33333
#3:  Cat 44.66667 54.00000

Well, you can always try WHERE textcolumn LIKE "%SUBSTRING%" - but this is guaranteed to be pretty slow, as your query can't do an index match because you are looking for characters on the left side.

It depends on the field type - a textarea usually won't be saved as VARCHAR, but rather as (a kind of) TEXT field, so you can use the MATCH AGAINST operator.

To get the columns that don't match, simply put a NOT in front of the like: WHERE textcolumn NOT LIKE "%SUBSTRING%".

Whether the search is case-sensitive or not depends on how you stock the data, especially what COLLATION you use. By default, the search will be case-insensitive.

Updated answer to reflect question update:

I say that doing a WHERE field LIKE "%value%" is slower than WHERE field LIKE "value%" if the column field has an index, but this is still considerably faster than getting all values and having your application filter. Both scenario's:

1/ If you do SELECT field FROM table WHERE field LIKE "%value%", MySQL will scan the entire table, and only send the fields containing "value".

2/ If you do SELECT field FROM table and then have your application (in your case PHP) filter only the rows with "value" in it, MySQL will also scan the entire table, but send all the fields to PHP, which then has to do additional work. This is much slower than case #1.

Solution: Please do use the WHERE clause, and use EXPLAIN to see the performance.

driver.findElement(By.cssSelector("body")).sendKeys(Keys.CONTROL +"t");

ArrayList<String> tabs = new ArrayList<String> (driver.getWindowHandles());

driver.switchTo().window(tabs.get(0));

function repeatString(n, string) {
  var repeat = [];
  repeat.length = n + 1;
  return repeat.join(string);
}

repeatString(3,'x'); // => xxx
repeatString(10,''); // => ""

Eclipse by default does not know about your external Maven installation and uses the embedded one. Therefore in order for Eclipse to use your global settings you need to set it in menu Settings ? Maven ? Installations.

.border-blue.background { ... } is for one item with multiple classes.
.border-blue, .background { ... } is for multiple items each with their own class.
.border-blue .background { ... } is for one item where '.background' is the child of '.border-blue'.

See Chris' answer for a more thorough explanation.

-bash-3.2$ echo "191.191.191.39" | egrep 
  '(^|[^0-9])((2([6-9]|5[0-5]?|[0-4][0-9]?)?|1([0-9][0-9]?)?|[3-9][0-9]?|0)\.{3}
     (2([6-9]|5[0-5]?|[0-4][0-9]?)?|1([0-9][0-9]?)?|[3-9][0-9]?|0)($|[^0-9])'

>> 191.191.191.39

(This is a DFA that matches the entire addr space (including broadcasts, etc.) an nothing else.

There's also SSH Key - Still asking for password and passphrase

Using ssh-add ~/.ssh/id_rsa without a local keychain.

This avoids having to mess with tokens.

Use like this:

String myString = String(n);

You can find more examples here.

Some people might even deliberately obscure the technology they use. After all, it wouldn't take me long to tweak apache so that ".asp" actually ran perl scripts and put "powered by Microsoft IIS" into my footer despite the fact I used MySQL.

That way you'd spend all your time trying to hack my site using vulnerabilities it doesn't actually have.

npm set registry http://85.10.209.91/

(this proxy fetches the original data from registry.npmjs.org and manipulates the tarball urls to fix the tarball file structure issue).

The other solutions seem to have outdated versions.

I'm a recovering IOC addict. I'm finding it hard to justify using IOC for DI in most cases these days. IOC containers sacrifice compile time checking and supposedly in return give you "easy" setup, complex lifetime management and on the fly discovering of dependencies at run time. I find the loss of compile time checking and resulting run time magic/exceptions, is not worth the bells and whistles in the vast majority of cases. In large enterprise applications they can make it very difficult to follow what is going on.

I don't buy the centralization argument because you can centralize static setup very easily as well by using an abstract factory for your application and religiously deferring object creation to the abstract factory i.e. do proper DI.

Why not do static magic-free DI like this:

interface IServiceA { }
interface IServiceB { }
class ServiceA : IServiceA { }
class ServiceB : IServiceB { }

class StubServiceA : IServiceA { }
class StubServiceB : IServiceB { }

interface IRoot { IMiddle Middle { get; set; } }
interface IMiddle { ILeaf Leaf { get; set; } }
interface ILeaf { }

class Root : IRoot
{
    public IMiddle Middle { get; set; }

    public Root(IMiddle middle)
    {
        Middle = middle;
    }

}

class Middle : IMiddle
{
    public ILeaf Leaf { get; set; }

    public Middle(ILeaf leaf)
    {
        Leaf = leaf;
    }
}

class Leaf : ILeaf
{
    IServiceA ServiceA { get; set; }
    IServiceB ServiceB { get; set; }

    public Leaf(IServiceA serviceA, IServiceB serviceB)
    {
        ServiceA = serviceA;
        ServiceB = serviceB;
    }
}


interface IApplicationFactory
{
    IRoot CreateRoot();
}

abstract class ApplicationAbstractFactory : IApplicationFactory
{
    protected abstract IServiceA ServiceA { get; }
    protected abstract IServiceB ServiceB { get; }

    protected IMiddle CreateMiddle()
    {
        return new Middle(CreateLeaf());
    }

    protected ILeaf CreateLeaf()
    {
        return new Leaf(ServiceA,ServiceB);
    }


    public IRoot CreateRoot()
    {
        return new Root(CreateMiddle());
    }
}

class ProductionApplication : ApplicationAbstractFactory
{
    protected override IServiceA ServiceA
    {
        get { return new ServiceA(); }
    }

    protected override IServiceB ServiceB
    {
        get { return new ServiceB(); }
    }
}

class FunctionalTestsApplication : ApplicationAbstractFactory
{
    protected override IServiceA ServiceA
    {
        get { return new StubServiceA(); }
    }

    protected override IServiceB ServiceB
    {
        get { return new StubServiceB(); }
    }
}


namespace ConsoleApplication5
{
    class Program
    {
        static void Main(string[] args)
        {
            var factory = new ProductionApplication();
            var root = factory.CreateRoot();

        }
    }

    //[TestFixture]
    class FunctionalTests
    {
        //[Test]
        public void Test()
        {
            var factory = new FunctionalTestsApplication();
            var root = factory.CreateRoot();
        }
    }
}

Your container configuration is your abstract factory implementation, your registrations are implementations of abstract members. If you need a new singleton dependency, just add another abstract property to the abstract factory. If you need a transient dependency, just add another method and inject it as a Func<>.

Advantages:

• All setup and object creation configuration is centralized .
• Configuration is just code
• Compile time checking makes it easy to maintain as you cannot forget to update your registrations.
• No run-time reflection magic

I recommend sceptics to give it a go next green field project and honestly ask yourself at which point you need the container. It's easy to factor in an IOC container later on as you're just replacing a factory implementation with a IOC Container configuration module.

Alternatively, you could create a regular Mac OS X application from your script using Platypus

There is a lot more to coalesce than just a replacement for ISNULL. I completely agree that the official "documentation" of coalesce is vague and unhelpful. This article helps a lot. http://www.mssqltips.com/sqlservertip/1521/the-many-uses-of-coalesce-in-sql-server/

Put this in your html body (taken from the official angular.js website):

<script src="https://ajax.googleapis.com/ajax/libs/angularjs/1.4.5/angular.min.js"></script>

I believe that you were using some older angular.js files since you don't have any issues in plunker and therefore you got the specified error.

This line did solve the issue in my case,

sudo apt clean

You can use findHandlersJS

You can find the handler by doing in the chrome console:

findEventHandlers("click", "img.envio")

You'll get the following information printed in chrome's console:

• element
  The actual element where the event handler was registered in
• events
  Array with information about the jquery event handlers for the event type that we are interested in (e.g. click, change, etc)
• handler
  Actual event handler method that you can see by right clicking it and selecting Show function definition
• selector
  The selector provided for delegated events. It will be empty for direct events.
• targets
  List with the elements that this event handler targets. For example, for a delegated event handler that is registered in the document object and targets all buttons in a page, this property will list all buttons in the page. You can hover them and see them highlighted in chrome.

More info here and you can try it in this example site here.

1. Download cURL (Win64 ia64 zip binary with SSL)
2. Extract curl.exe into "C:\Windows\System32"
3. Done

Even more easier:

Download the Win64 2000/XP x86_64 MSI installer provided by Edward LoPinto.

At the time of writing file curl-7.46.0-win64.exe was the most recent. Tested with Windows 10.

1. go to %appdata%\NuGet\NuGet.config

2. Modify this line:

   <packageSources>
       <add key="Microsoft Visual Studio Offline Packages" value="C:\Program Files (x86)\Microsoft SDKs\NuGetPackages\" />
       <add key="Package source" value="https://api.nuget.org/v3/index.json" />
   </packageSources>
   

The Material icons use the Material icon font, and the font needs to be included with the page.

Here's the CDN from Google Web Fonts:

<link rel="stylesheet" href="https://fonts.googleapis.com/icon?family=Material+Icons">

just put Wait() to wait until task completed

GetInputReportViaInterruptTransfer().Wait();

Currently I implemented the following in my app. May these helps to move out from the application from whereever you want. I am calling this function from action bar Menus.

public static void exitApplication(Context context) {
    if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.HONEYCOMB) {
        exitApplicationHC(context);
    }
    else {
        exitApplicationPreHC(context);
    }
}

private static void exitApplicationPreHC(Context context) {
    Intent i = new Intent(context, LoginActivity.class);
    i.putExtra(EXTRA_EXIT, true);
    i.addFlags(Intent.FLAG_ACTIVITY_CLEAR_TOP);
    i.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
    context.startActivity(i);
    if (context instanceof Activity) {
        ((Activity) context).finish();
    }
}

@TargetApi(Build.VERSION_CODES.HONEYCOMB)
private static void exitApplicationHC(Context context) {
    Intent i = new Intent(context, LoginActivity.class);
    i.putExtra(EXTRA_EXIT, true);
    i.addFlags(Intent.FLAG_ACTIVITY_CLEAR_TOP);
    i.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
    i.addFlags(Intent.FLAG_ACTIVITY_CLEAR_TASK);
    context.startActivity(i);
}

Another option to ABORT / SKIP / CONTINUE from IDE

VCS > Git > Abort Rebasing

To be specific, if you want to merge something to master, you can follow the below steps.

git add --all // If you want to stage all changes other options also available
git commit -m "Your commit message"
git push // By default when it clone is sets your origin to master or you would have set sometime with git push -u origin master.

It's a common practice in the pull request model create to a new local branch and then push that branch to remote. For that you need to mention where you want to push your changes at remote. You can do this by mentioning remote at the time of push.

git push origin develop // It will create a remote branch with name "develop".

If you want to create a branch other than your local branch name you can do that with the following command.

git push origin develop:some-other-name

It's a new 'feature' of vagrant. Take a look here: https://github.com/mitchellh/vagrant/issues/3329

They will change the 'Error' to 'Warning'. It's just telling you that the machine isn't booted yet, and it's trying to connect...

All the above answers not opening image.. when second time I try to open it show the gallery not image.

I got solution from mix of various SO answers..

Intent galleryIntent = new Intent(Intent.ACTION_VIEW, android.provider.MediaStore.Images.Media.EXTERNAL_CONTENT_URI);
galleryIntent.setDataAndType(Uri.fromFile(mImsgeFileName), "image/*");
galleryIntent.setFlags(Intent.FLAG_ACTIVITY_NEW_TASK);
startActivity(galleryIntent);

This one only worked for me..

You can get your Button1 location and than increase the Y value every time you click on it.

Public Class Form1
    Dim BtnCoordinate As Point
    Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
        Dim btn As Button = New Button
        BtnCoordinate.Y += Button1.Location.Y + 4
        With btn
            .Location = New Point(BtnCoordinate)
            .Text = TextBox1.Text
            .ForeColor = Color.Black
        End With
        Me.Controls.Add(btn)
        Me.StartPosition = FormStartPosition.CenterScreen
    End Sub

    Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        Button1Coordinate = Button1.Location
    End Sub
End Class

You can't restart a thread so your best option is to save the current state of the object at the time the thread was stopped and when operations need to continue on that object you can recreate that object using the saved and then start the new thread.

These two articles Swing Worker and Concurrency may help you determine the best solution for your problem.

In case anyone else ends up here using Jupyter Notebooks, you just need

%matplotlib inline

Purpose of "%matplotlib inline"

Add a check to the top of your Entrypoint script

Docker really needs to implement this as a new feature, but here's another workaround option for situations in which you have an Entrypoint that terminates after success or failure, which can make it difficult to debug.

If you don't already have an Entrypoint script, create one that runs whatever command(s) you need for your container. Then, at the top of this file, add these lines to entrypoint.sh:

# Run once, hold otherwise
if [ -f "already_ran" ]; then
    echo "Already ran the Entrypoint once. Holding indefinitely for debugging."
    cat
fi
touch already_ran

# Do your main things down here

To ensure that cat holds the connection, you may need to provide a TTY. I'm running the container with my Entrypoint script like so:

docker run -t --entrypoint entrypoint.sh image_name

This will cause the script to run once, creating a file that indicates it has already run (in the container's virtual filesystem). You can then restart the container to perform debugging:

docker start container_name

When you restart the container, the already_ran file will be found, causing the Entrypoint script to stall with cat (which just waits forever for input that will never come, but keeps the container alive). You can then execute a debugging bash session:

docker exec -i container_name bash

While the container is running, you can also remove already_ran and manually execute the entrypoint.sh script to rerun it, if you need to debug that way.

I was also facing same issue. Below are the steps to resolve it.

1. check your openssl version

openssl version

2. If your version is below

OpenSSL 1.1.1h 22 Sep 2020

3. go to below link and download latest full version of openssl. openssl windows installer
4. After installation add openssl path at the top of 'PATH' variable in system path.
5. confirm your version is latest by opening new command prompt and running command in step 1
6. Now you're ready to run the command again and this time it will work.

If the id column has no default value, but has NOT NULL constraint, then you have to provide a value yourself

INSERT INTO dbo.role (id, name, created) VALUES ('something', 'Content Coordinator', GETDATE()), ('Content Viewer', GETDATE())

Solution: Windows active directory authentication using Thread and Robot

I used Java Thread and Robot with Selenium webdriver to automate windows active directory authentication process of our website. This logic worked fine in Firefox and Chrome but it didn't work in IE. For some reason IE kills the webdriver when authentication window pops up whereas Chrome and Firefox prevents the web driver from getting killed. I didn't try in other web browser such as Safari.

//...
//Note: this logic works in Chrome and Firefox. It did not work in IE and I did not try Safari.
//...

//import relevant packages here

public class TestDemo {

    static WebDriver driver;

    public static void main(String[] args) {

        //setup web driver
        System.setProperty("webdriver.chrome.driver", "path to your chromedriver.exe");
        driver = new ChromeDriver();

        //create new thread for interaction with windows authentication window
        (new Thread(new LoginWindow())).start();                

        //open your url. this will prompt you for windows authentication
        driver.get("your url");

        //add test scripts below ...
        driver.findElement(By.linkText("Home")).click();    
        //.....
        //.....
    }

    //inner class for Login thread    
    public class LoginWindow implements Runnable {

        @Override
        public void run() {
            try {
                login();
            } catch (Exception ex) {
                System.out.println("Error in Login Thread: " + ex.getMessage());
            }
        }

        public void login() throws Exception {

            //wait - increase this wait period if required
            Thread.sleep(5000);

            //create robot for keyboard operations
            Robot rb = new Robot();

            //Enter user name by ctrl-v
            StringSelection username = new StringSelection("username");
            Toolkit.getDefaultToolkit().getSystemClipboard().setContents(username, null);            
            rb.keyPress(KeyEvent.VK_CONTROL);
            rb.keyPress(KeyEvent.VK_V);
            rb.keyRelease(KeyEvent.VK_V);
            rb.keyRelease(KeyEvent.VK_CONTROL);

            //tab to password entry field
            rb.keyPress(KeyEvent.VK_TAB);
            rb.keyRelease(KeyEvent.VK_TAB);
            Thread.sleep(2000);

            //Enter password by ctrl-v
            StringSelection pwd = new StringSelection("password");
            Toolkit.getDefaultToolkit().getSystemClipboard().setContents(pwd, null);
            rb.keyPress(KeyEvent.VK_CONTROL);
            rb.keyPress(KeyEvent.VK_V);
            rb.keyRelease(KeyEvent.VK_V);
            rb.keyRelease(KeyEvent.VK_CONTROL);

            //press enter
            rb.keyPress(KeyEvent.VK_ENTER);
            rb.keyRelease(KeyEvent.VK_ENTER);

            //wait
            Thread.sleep(5000);
        }                        
    }      
}

maybe you want ifelse:

a <- c(1,1,1,1,0,0,0,0,2,2)
ifelse(a>0,a/sum(a),1)

 [1] 0.125 0.125 0.125 0.125 1.000 1.000 1.000 1.000
 [9] 0.250 0.250

the simplest way to convert a string that has a delimiter like a comma is just to use the split method

"1,2,3,4".split(',') # "1", "2", "3", "4"]

you can find more info on how to use the split method in the ruby docs

Divides str into substrings based on a delimiter, returning an array of these substrings.

If pattern is a String, then its contents are used as the delimiter when splitting str. If pattern is a single space, str is split on whitespace, with leading whitespace and runs of contiguous whitespace characters ignored.

If pattern is a Regexp, str is divided where the pattern matches. Whenever the pattern matches a zero-length string, str is split into individual characters. If pattern contains groups, the respective matches will be returned in the array as well.

If pattern is omitted, the value of $; is used. If $; is nil (which is the default), str is split on whitespace as if ` ‘ were specified.

If the limit parameter is omitted, trailing null fields are suppressed. If limit is a positive number, at most that number of fields will be returned (if limit is 1, the entire string is returned as the only entry in an array). If negative, there is no limit to the number of fields returned, and trailing null fields are not suppressed.

public List<Requirement> listInquiryLogged()
{
    using (DataClassesDataContext dt = new DataClassesDataContext(System.Configuration.ConfigurationManager.ConnectionStrings["ApplicationServices"].ConnectionString))
    {
        var inq = new int[] {1683,1684,1685,1686,1687,1688,1688,1689,1690,1691,1692,1693};
        var result = from Q in dt.Requirements
                     where inq.Contains(Q.ID)
                     orderby Q.Description
                     select Q;

        return result.ToList<Requirement>();
    }
}

Perhaps you should check your IDE case sensitive properties. I had the same problem, and solved it by making Idea case-sensitive (for my filesystem is case sensitive): https://confluence.jetbrains.com/display/IDEADEV/Filesystem+Case-Sensitivity+Mismatch

import {DomSanitizationService} from '@angular/platform-browser';
@Component({
 templateUrl: 'build/pages/veeu/veeu.html'
 })
  export class VeeUPage {
     trustedURL:any;
      static get parameters() {
               return [NavController, App, MenuController, 
              DomSanitizationService];
        }
      constructor(nav, app, menu, sanitizer) {
        this.app = app;
        this.nav = nav;
        this.menu = menu;
        this.sanitizer = sanitizer;  
        this.trustedURL  = sanitizer.bypassSecurityTrustUrl(this.mediaItems[1].url);
        } 
 }



 <iframe [src]='trustedURL' width="640" height="360" frameborder="0"
   webkitallowfullscreen mozallowfullscreen allowfullscreen>
</iframe>


User property binding instead of function.

[UPDATED privacy keys list to iOS 13 - see below]

There is a list of all Cocoa Keys that you can specify in your Info.plist file:

https://developer.apple.com/library/content/documentation/General/Reference/InfoPlistKeyReference/Articles/CocoaKeys.html

(Xcode: Target -> Info -> Custom iOS Target Properties)

iOS already required permissions to access microphone, camera, and media library earlier (iOS 6, iOS 7), but since iOS 10 app will crash if you don't provide the description why you are asking for the permission (it can't be empty).

Privacy keys with example description:

Source

Alternatively, you can open Info.plist as source code:

Source

And add privacy keys like this:

<key>NSLocationAlwaysUsageDescription</key>
<string>${PRODUCT_NAME} always location use</string>

List of all privacy keys: [UPDATED to iOS 13]

NFCReaderUsageDescription
NSAppleMusicUsageDescription
NSBluetoothAlwaysUsageDescription
NSBluetoothPeripheralUsageDescription
NSCalendarsUsageDescription
NSCameraUsageDescription
NSContactsUsageDescription
NSFaceIDUsageDescription
NSHealthShareUsageDescription
NSHealthUpdateUsageDescription
NSHomeKitUsageDescription
NSLocationAlwaysUsageDescription
NSLocationUsageDescription
NSLocationWhenInUseUsageDescription
NSMicrophoneUsageDescription
NSMotionUsageDescription
NSPhotoLibraryAddUsageDescription
NSPhotoLibraryUsageDescription
NSRemindersUsageDescription
NSSiriUsageDescription
NSSpeechRecognitionUsageDescription
NSVideoSubscriberAccountUsageDescription

Update 2019:

In the last months, two of my apps were rejected during the review because the camera usage description wasn't specifying what I do with taken photos.

I had to change the description from ${PRODUCT_NAME} need access to the camera to take a photo to ${PRODUCT_NAME} need access to the camera to update your avatar even though the app context was obvious (user tapped on the avatar).

It seems that Apple is now paying even more attention to the privacy usage descriptions, and we should explain in details why we are asking for permission.

You can use setTimeout to do this

function myFunction() {
    // your code to run after the timeout
}

// stop for sometime if needed
setTimeout(myFunction, 5000);

If you've checked all the things from the above answers (which are common mistakes) and you're sure that your view is at the location in the exceptions, then you may need to restart Visual Studio.

:(

you can also do it by async function to get all the users

await User.find({},(err,users)=>{

    if (err){
    return  res.status(422).send(err)
    }

    if (!users){
        return res.status(422).send({error:"No data in the collection"})
    }

    res.send({Allusers:users})

})

This works for me

cd "C:\Program Files\SmartBear\SoapUI-5.6.0\bin"

start SoapUI-5.6.0.exe -w "C:\DATA\SoapUi\Workspaces\Production-workspace.xml"

exit

(Update: overlooked a fault in the matter, I have corrected)

(Update2: I wrote from memory the code screwed up, repaired it)

(Update3: check on SQLFiddle)

create table Derived_Values
  (
    BusinessUnit nvarchar(100) not null
    ,Questions nvarchar(100) not null
    ,Answer nvarchar(100)
    )

go

ALTER TABLE Derived_Values ADD CONSTRAINT PK_Derived_Values
PRIMARY KEY CLUSTERED (BusinessUnit, Questions);

create table Derived_Values_Test
  (
    BusinessUnit nvarchar(150)
    ,Questions nvarchar(100)
    ,Answer nvarchar(100)
    )

go

CREATE TRIGGER trgAfterUpdate ON  [Derived_Values]
FOR UPDATE
AS  
begin
    declare @BusinessUnit nvarchar(50)
    set @BusinessUnit = 'Updated Record -- After Update Trigger.'

    insert into 
        [Derived_Values_Test]
        --(BusinessUnit,Questions, Answer) 
    SELECT 
        @BusinessUnit + i.BusinessUnit, i.Questions, i.Answer
    FROM 
        inserted i
        inner join deleted d on i.BusinessUnit = d.BusinessUnit
end

go

CREATE TRIGGER trgAfterDelete ON  [Derived_Values]
FOR UPDATE
AS  
begin
    declare @BusinessUnit nvarchar(50)
    set @BusinessUnit = 'Deleted Record -- After Delete Trigger.'

    insert into 
        [Derived_Values_Test]
        --(BusinessUnit,Questions, Answer) 
    SELECT 
        @BusinessUnit + d.BusinessUnit, d.Questions, d.Answer
    FROM 
        deleted d
end

go

insert Derived_Values (BusinessUnit,Questions, Answer) values ('BU1', 'Q11', 'A11')
insert Derived_Values (BusinessUnit,Questions, Answer) values ('BU1', 'Q12', 'A12')
insert Derived_Values (BusinessUnit,Questions, Answer) values ('BU2', 'Q21', 'A21')
insert Derived_Values (BusinessUnit,Questions, Answer) values ('BU2', 'Q22', 'A22')

UPDATE Derived_Values SET Answer='Updated Answers A11' from Derived_Values WHERE (BusinessUnit = 'BU1') AND (Questions = 'Q11');
UPDATE Derived_Values SET Answer='Updated Answers A12' from Derived_Values WHERE (BusinessUnit = 'BU1') AND (Questions = 'Q12');
UPDATE Derived_Values SET Answer='Updated Answers A21' from Derived_Values WHERE (BusinessUnit = 'BU2') AND (Questions = 'Q21');
UPDATE Derived_Values SET Answer='Updated Answers A22' from Derived_Values WHERE (BusinessUnit = 'BU2') AND (Questions = 'Q22');

delete Derived_Values;

and then:

SELECT * FROM Derived_Values;
go

select * from Derived_Values_Test;


Record Count: 0;

BUSINESSUNIT    QUESTIONS   ANSWER
Updated Record -- After Update Trigger.BU1  Q11 Updated Answers A11
Deleted Record -- After Delete Trigger.BU1  Q11 A11
Updated Record -- After Update Trigger.BU1  Q12 Updated Answers A12
Deleted Record -- After Delete Trigger.BU1  Q12 A12
Updated Record -- After Update Trigger.BU2  Q21 Updated Answers A21
Deleted Record -- After Delete Trigger.BU2  Q21 A21
Updated Record -- After Update Trigger.BU2  Q22 Updated Answers A22
Deleted Record -- After Delete Trigger.BU2  Q22 A22

(Update4: If you want to sync: SQLFiddle)

create table Derived_Values
  (
    BusinessUnit nvarchar(100) not null
    ,Questions nvarchar(100) not null
    ,Answer nvarchar(100)
    )

go

ALTER TABLE Derived_Values ADD CONSTRAINT PK_Derived_Values
PRIMARY KEY CLUSTERED (BusinessUnit, Questions);

create table Derived_Values_Test
  (
    BusinessUnit nvarchar(150) not null
    ,Questions nvarchar(100) not null
    ,Answer nvarchar(100)
    )

go

ALTER TABLE Derived_Values_Test ADD CONSTRAINT PK_Derived_Values_Test
PRIMARY KEY CLUSTERED (BusinessUnit, Questions);

CREATE TRIGGER trgAfterInsert ON  [Derived_Values]
FOR INSERT
AS  
begin
    insert
        [Derived_Values_Test]
        (BusinessUnit,Questions,Answer)
    SELECT 
        i.BusinessUnit, i.Questions, i.Answer
    FROM 
        inserted i
end

go


CREATE TRIGGER trgAfterUpdate ON  [Derived_Values]
FOR UPDATE
AS  
begin
    declare @BusinessUnit nvarchar(50)
    set @BusinessUnit = 'Updated Record -- After Update Trigger.'

    update
        [Derived_Values_Test]
    set
        --BusinessUnit = i.BusinessUnit
        --,Questions = i.Questions
        Answer = i.Answer
    from
        [Derived_Values]
        inner join inserted i 
    on
        [Derived_Values].BusinessUnit = i.BusinessUnit
        and
        [Derived_Values].Questions = i.Questions
end

go

CREATE TRIGGER trgAfterDelete ON  [Derived_Values]
FOR DELETE
AS  
begin
    delete 
        [Derived_Values_Test]
    from
        [Derived_Values_Test]
        inner join deleted d 
    on
        [Derived_Values_Test].BusinessUnit = d.BusinessUnit
        and
        [Derived_Values_Test].Questions = d.Questions
end

go

insert Derived_Values (BusinessUnit,Questions, Answer) values ('BU1', 'Q11', 'A11')
insert Derived_Values (BusinessUnit,Questions, Answer) values ('BU1', 'Q12', 'A12')
insert Derived_Values (BusinessUnit,Questions, Answer) values ('BU2', 'Q21', 'A21')
insert Derived_Values (BusinessUnit,Questions, Answer) values ('BU2', 'Q22', 'A22')

UPDATE Derived_Values SET Answer='Updated Answers A11' from Derived_Values WHERE (BusinessUnit = 'BU1') AND (Questions = 'Q11');
UPDATE Derived_Values SET Answer='Updated Answers A12' from Derived_Values WHERE (BusinessUnit = 'BU1') AND (Questions = 'Q12');
UPDATE Derived_Values SET Answer='Updated Answers A21' from Derived_Values WHERE (BusinessUnit = 'BU2') AND (Questions = 'Q21');
UPDATE Derived_Values SET Answer='Updated Answers A22' from Derived_Values WHERE (BusinessUnit = 'BU2') AND (Questions = 'Q22');

--delete Derived_Values;

And then:

SELECT * FROM Derived_Values;
go

select * from Derived_Values_Test;


BUSINESSUNIT    QUESTIONS   ANSWER
BU1 Q11 Updated Answers A11
BU1 Q12 Updated Answers A12
BU2 Q21 Updated Answers A21
BU2 Q22 Updated Answers A22

BUSINESSUNIT    QUESTIONS   ANSWER
BU1 Q11 Updated Answers A11
BU1 Q12 Updated Answers A12
BU2 Q21 Updated Answers A21
BU2 Q22 Updated Answers A22

No, you can't change scrollbars placement without any additional issues.

You can change text-direction to right-to-left ( rtl ), but it also change text position inside block.

This code can helps you, but I not sure it works in all browsers and OS.

<element style="direction: rtl; text-align: left;" />

If you want to be sure the (single commit) patch will be applied on top of a specific commit, you can use the new git 2.9 (June 2016) option git format-patch --base

git format-patch --base=COMMIT_VALUE~ -M -C COMMIT_VALUE~..COMMIT_VALUE

# or
git format-patch --base=auto -M -C COMMIT_VALUE~..COMMIT_VALUE

# or
git config format.useAutoBase true
git format-patch -M -C COMMIT_VALUE~..COMMIT_VALUE

See commit bb52995, commit 3de6651, commit fa2ab86, commit ded2c09 (26 Apr 2016) by Xiaolong Ye (``).
^{(Merged by Junio C Hamano -- gitster -- in commit 72ce3ff, 23 May 2016)}

format-patch: add '--base' option to record base tree info

Maintainers or third party testers may want to know the exact base tree the patch series applies to. Teach git format-patch a '--base' option to record the base tree info and append it at the end of the first message (either the cover letter or the first patch in the series).

The base tree info consists of the "base commit", which is a well-known commit that is part of the stable part of the project history everybody else works off of, and zero or more "prerequisite patches", which are well-known patches in flight that is not yet part of the "base commit" that need to be applied on top of "base commit" in topological order before the patches can be applied.

The "base commit" is shown as "base-commit: " followed by the 40-hex of the commit object name.
A "prerequisite patch" is shown as "prerequisite-patch-id: " followed by the 40-hex "patch id", which can be obtained by passing the patch through the "git patch-id --stable" command.

Git 2.23 (Q3 2019) will improve that, because the "--base" option of "format-patch" computed the patch-ids for prerequisite patches in an unstable way, which has been updated to compute in a way that is compatible with "git patch-id --stable".

See commit a8f6855, commit 6f93d26 (26 Apr 2019) by Stephen Boyd (akshayka).
^{(Merged by Junio C Hamano -- gitster -- in commit 8202d12, 13 Jun 2019)}

format-patch: make --base patch-id output stable

We weren't flushing the context each time we processed a hunk in the patch-id generation code in diff.c, but we were doing that when we generated "stable" patch-ids with the 'patch-id' tool.

Let's port that similar logic over from patch-id.c into diff.c so we can get the same hash when we're generating patch-ids for 'format-patch --base=' types of command invocations.

Before Git 2.24 (Q4 2019), "git format-patch -o <outdir>" did an equivalent of "mkdir <outdir>" not "mkdir -p <outdir>", which is being corrected.

See commit edefc31 (11 Oct 2019) by Bert Wesarg (bertwesarg).
^{(Merged by Junio C Hamano -- gitster -- in commit f1afbb0, 18 Oct 2019)}

format-patch: create leading components of output directory

^{Signed-off-by: Bert Wesarg}

'git format-patch -o ' did an equivalent of 'mkdir <outdir>' not 'mkdir -p <outdir>', which is being corrected.

Avoid the usage of 'adjust_shared_perm' on the leading directories which may have security implications. Achieved by temporarily disabling of 'config.sharedRepository' like 'git init' does.

With Git 2.25 (Q1 2020), "git rebase" did not work well when format.useAutoBase configuration variable is set, which has been corrected.

See commit cae0bc0, commit 945dc55, commit 700e006, commit a749d01, commit 0c47e06 (04 Dec 2019) by Denton Liu (Denton-L).
^{(Merged by Junio C Hamano -- gitster -- in commit 71a7de7, 16 Dec 2019)}

rebase: fix format.useAutoBase breakage

^{Reported-by: Christian Biesinger
Signed-off-by: Denton Liu}

With format.useAutoBase = true, running rebase resulted in an error:

fatal: failed to get upstream, if you want to record base commit automatically,
please use git branch --set-upstream-to to track a remote branch.
Or you could specify base commit by --base=<base-commit-id> manually
error:
git encountered an error while preparing the patches to replay
these revisions:

ede2467cdedc63784887b587a61c36b7850ebfac..d8f581194799ae29bf5fa72a98cbae98a1198b12

As a result, git cannot rebase them.

Fix this by always passing --no-base to format-patch from rebase so that the effect of format.useAutoBase is negated.

With Git 2.29 (Q4 2020), "git format-patch"^(man) learns to take "whenAble" as a possible value for the format.useAutoBase configuration variable to become no-op when the automatically computed base does not make sense.

See commit 7efba5f (01 Oct 2020) by Jacob Keller (jacob-keller).
^{(Merged by Junio C Hamano -- gitster -- in commit 5f8c70a, 05 Oct 2020)}

format-patch: teach format.useAutoBase "whenAble" option

^{Signed-off-by: Jacob Keller}

The format.useAutoBase configuration option exists to allow users to enable '--base=auto' for format-patch by default.

This can sometimes lead to poor workflow, due to unexpected failures when attempting to format an ancient patch:

$ git format-patch -1 <an old commit>
fatal: base commit shouldn't be in revision list  

This can be very confusing, as it is not necessarily immediately obvious that the user requested a --base (since this was in the configuration, not on the command line).

We do want --base=auto to fail when it cannot provide a suitable base, as it would be equally confusing if a formatted patch did not include the base information when it was requested.

Teach format.useAutoBase a new mode, "whenAble".

This mode will cause format-patch to attempt to include a base commit when it can. However, if no valid base commit can be found, then format-patch will continue formatting the patch without a base commit.

In order to avoid making yet another branch name unusable with --base, do not teach --base=whenAble or --base=whenable.

Instead, refactor the base_commit option to use a callback, and rely on the global configuration variable auto_base.

This does mean that a user cannot request this optional base commit generation from the command line. However, this is likely not too valuable. If the user requests base information manually, they will be immediately informed of the failure to acquire a suitable base commit. This allows the user to make an informed choice about whether to continue the format.

Add tests to cover the new mode of operation for --base.

git config now includes in its man page:

format-patch by default.
Can also be set to "whenAble" to allow enabling --base=auto if a suitable base is available, but to skip adding base info otherwise without the format dying.

With Git 2.30 (Q1 2021), "git format-patch --output=there"^(man) did not work as expected and instead crashed.

The option is now supported.

See commit dc1672d, commit 1e1693b, commit 4c6f781 (04 Nov 2020) by Jeff King (peff).
^{(Merged by Junio C Hamano -- gitster -- in commit 5edc8bd, 18 Nov 2020)}

format-patch: support --output option

^{Reported-by: Johannes Postler
Signed-off-by: Jeff King}

We've never intended to support diff's --output option in format-patch. And until baa4adc66a (parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN, 2019-01-27, Git v2.22.0-rc0), it was impossible to trigger. We first parse the format-patch options before handing the remainder off to setup_revisions().
Before that commit, we'd accept "--output=foo" as an abbreviation for "--output-directory=foo". But afterwards, we don't check abbreviations, and --output gets passed to the diff code.

This results in nonsense behavior and bugs. The diff code will have opened a filehandle at rev.diffopt.file, but we'll overwrite that with our own handles that we open for each individual patch file. So the --output file will always just be empty. But worse, the diff code also sets rev.diffopt.close_file, so log_tree_commit() will close the filehandle itself. And then the main loop in cmd_format_patch() will try to close it again, resulting in a double-free.

The simplest solution would be to just disallow --output with format-patch, as nobody ever intended it to work. However, we have accidentally documented it (because format-patch includes diff-options). And it does work with "git log"^(man) , which writes the whole output to the specified file. It's easy enough to make that work for format-patch, too: it's really the same as --stdout, but pointed at a specific file.

We can detect the use of the --output option by the "close_file" flag (note that we can't use rev.diffopt.file, since the diff setup will otherwise set it to stdout). So we just need to unset that flag, but don't have to do anything else. Our situation is otherwise exactly like --stdout (note that we don't fclose() the file, but nor does the stdout case; exiting the program takes care of that for us).

The DisplayFormat attribute did not work for me in either form upon initial load. I created an EditorTemplate instead:

<%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<System.DateTime>" %>
<%@ Import Namespace="System.Web.Mvc.Html" %>
<%=
    Html.TextBox("", Model.ToShortDateString(), new { @class = "date-range" }) %>

Discord doesn't allow colored text. Though, currently, you have two options to "mimic" colored text.

Option #1 (Markdown code-blocks)

Discord supports Markdown and uses highlight.js to highlight code-blocks. Some programming languages have specific color outputs from highlight.js and can be used to mimic colored output.

To use code-blocks, send a normal message in this format (Which follows Markdown's standard format).

```language
message
```

Languages that currently reproduce nice colors: prolog (red/orange), css (yellow).

Option #2 (Embeds)

Discord now supports Embeds and Webhooks, which can be used to display colored blocks, they also support markdown. For documentation on how to use Embeds, please read your lib's documentation.

(Embed Cheat-sheet)

I agree with Justin, and the WhiteSpace CHAR can be referenced using ASCII codes here Character number 32 represents a white space, Therefore:

string.Empty.PadRight(totalLength, (char)32);

An alternative approach: Create all spaces manually within a custom method and call it:

private static string GetSpaces(int totalLength)
    {
        string result = string.Empty;
        for (int i = 0; i < totalLength; i++)
        {
            result += " ";
        }
        return result;
    }

And call it in your code to create white spaces: GetSpaces(14);

Google led me to this solution (base64_encode). Hope this helps!

fill="#044B9466"

This is an RGBA color in hex notation inside the SVG, defined with hex values. This is valid, but not all programs can display it properly...

You can find the browser support for this syntax here: https://caniuse.com/#feat=css-rrggbbaa

As of August 2017: RGBA fill colors will display properly on Mozilla Firefox (54), Apple Safari (10.1) and Mac OS X Finder's "Quick View". However Google Chrome did not support this syntax until version 62 (was previously supported from version 54 with the Experimental Platform Features flag enabled).

Dirty trick: You could as well use lambda expression to pass any code you want including the call with parameters.

this.Include(includes, () =>
{
    _context.Cars.Include(<parameters>);
});

This is almost like the other answer but you don't need a scatter plot at all, you can simply specify a scatter-plot-like format (fmt-parameter) for errorbar:

import matplotlib.pyplot as plt
x = [1, 2, 3, 4]
y = [1, 4, 9, 16]
e = [0.5, 1., 1.5, 2.]
plt.errorbar(x, y, yerr=e, fmt='o')
plt.show()

Result:

A list of the avaiable fmt parameters can be found for example in the plot documentation:

character   description
'-'     solid line style
'--'    dashed line style
'-.'    dash-dot line style
':'     dotted line style
'.'     point marker
','     pixel marker
'o'     circle marker
'v'     triangle_down marker
'^'     triangle_up marker
'<'     triangle_left marker
'>'     triangle_right marker
'1'     tri_down marker
'2'     tri_up marker
'3'     tri_left marker
'4'     tri_right marker
's'     square marker
'p'     pentagon marker
'*'     star marker
'h'     hexagon1 marker
'H'     hexagon2 marker
'+'     plus marker
'x'     x marker
'D'     diamond marker
'd'     thin_diamond marker
'|'     vline marker
'_'     hline marker

As far as I remember, this is controlled by browser settings. In other words: user can chose whether they would like to open new tab in the background or foreground. Also they can chose whether new popup should open in new tab or just... popup.

For example in firefox preferences:

Notice the last option.

This should do the trick...

'recalculate all open workbooks
Application.Calculate

'recalculate a specific worksheet
Worksheets(1).Calculate

' recalculate a specific range
Worksheets(1).Columns(1).Calculate

jQuery plugin. Just put $(expression).longClick(function() { <your code here> });. Second parameter is hold duration; default timeout is 500 ms.

(function($) {
    $.fn.longClick = function(callback, timeout) {
        var timer;
        timeout = timeout || 500;
        $(this).mousedown(function() {
            timer = setTimeout(function() { callback(); }, timeout);
            return false;
        });
        $(document).mouseup(function() {
            clearTimeout(timer);
            return false;
        });
    };

})(jQuery);

Why not this way:

1. In a class module »myClass« use Public Sub Init(myArguments) instead of Private Sub Class_Initialize()
2. Instancing: Dim myInstance As New myClass: myInstance.Init myArguments

Here is my aproach of explaining te rules .style and #style are part of a matrix. that if not in the right order, they can override each other, or cause conflicts.

Here is the line up.

Matrix

#style 0,0,1,0 id

.style 0,1,0,0 class

if you want override these two you can use <style></style> witch has a matrix level or 1,0,0,0. And @media query's will override everything above... I am not sure about this but i think the ID selector # can only be used once in a page.

If your are on windows you can do it this way :

1. In your project root directory, Create file run.bat
2. Add your command with your choice of configurations in this file. For Example

ng serve --host 192.168.1.2 --open

3. Now you can click and open this file whenever you want to serve.

This not standard way but comfortable to use (which I feel).

You want huge?

Here's a small table: create table foo (id int not null primary key auto_increment, crap char(2000));

insert into foo(crap) values ('');

-- each time you run the next line, the number of rows in foo doubles. insert into foo( crap ) select * from foo;

run it twenty more times, you have over a million rows to play with.

Yes, if he's looking for looks of relations to navigate, this is not the answer. But if by huge he means to test performance and his ability to optimize, this will do it. I did exactly this (and then updated with random values) to test an potential answer I had for another question. (And didn't answer it, because I couldn't come up with better performance than what that asker had.)

Had he asked for "complex", I'd have gien a differnt answer. To me,"huge" implies "lots of rows".

Because you don't need huge to play with tables and relations. Consider a table, by itself, with no nullable columns. How many different kinds of rows can there be? Only one, as all columns must have some value as none can be null.

Every nullable column multiples by two the number of different kinds of rows possible: a row where that column is null, an row where it isn't null.

Now consider the table, not in isolation. Consider a table that is a child table: for every child that has an FK to the parent, that, is a many-to-one, there can be 0, 1 or many children. So we multiply by three times the count we got in the previous step (no rows for zero, one for exactly one, two rows for many). For any grandparent to which the parent is a many, another three.

For many-to-many relations, we can have have no relation, a one-to-one, a one-to-many, many-to-one, or a many-to-many. So for each many-to-many we can reach in a graph from the table, we multiply the rows by nine -- or just like two one-to manys. If the many-to-many also has data, we multiply by the nullability number.

Tables that we can't reach in our graph -- those that we have no direct or indirect FK to, don't multiply the rows in our table.

By recursively multiplying the each table we can reach, we can come up with the number of rows needed to provide one of each "kind", and we need no more than those to test every possible relation in our schema. And we're nowhere near huge.

mystring.replace (" ", "_")

if you assign this value to any variable, it will work

s = mystring.replace (" ", "_")

by default mystring wont have this

To solve this, you'll need to install only 2 packages. Follow the steps below.

1. Open atom, go to Packages(top bar) --> Settings View --> Install Packages/Themes.

2. Type "goto" in the search field and click the packages button on the right.

3. Install both "goto(1.8.3)" and "goto-definition(1.1.9)", or later versions. Make sure both of them are enabled after download.
4. If necessary, you can restart atom (for some people).
5. It should be able to work now. Right-Click on the method/attr/whatever, then select "Goto Definition"

You can set the attribute translatable="false" on the definition like this:

<string name="account_setup_imap" translatable="false">IMAP</string>

For more information: http://tools.android.com/recent/non-translatablestrings

The other answers cover how to do std dev in python sufficiently, but no one explains how to do the bizarre traversal you've described.

I'm going to assume A-Z is the entire population. If not see Ome's answer on how to inference from a sample.

So to get the standard deviation/mean of the first digit of every list you would need something like this:

#standard deviation
numpy.std([A_rank[0], B_rank[0], C_rank[0], ..., Z_rank[0]])

#mean
numpy.mean([A_rank[0], B_rank[0], C_rank[0], ..., Z_rank[0]])

To shorten the code and generalize this to any nth digit use the following function I generated for you:

def getAllNthRanks(n):
    return [A_rank[n], B_rank[n], C_rank[n], D_rank[n], E_rank[n], F_rank[n], G_rank[n], H_rank[n], I_rank[n], J_rank[n], K_rank[n], L_rank[n], M_rank[n], N_rank[n], O_rank[n], P_rank[n], Q_rank[n], R_rank[n], S_rank[n], T_rank[n], U_rank[n], V_rank[n], W_rank[n], X_rank[n], Y_rank[n], Z_rank[n]] 

Now you can simply get the stdd and mean of all the nth places from A-Z like this:

#standard deviation
numpy.std(getAllNthRanks(n))

#mean
numpy.mean(getAllNthRanks(n))

If you have a look at Preferences -> General you will notice at the bottom of the panel, there is a setting Load preferences from a custom folder or URL:. There is a button next to it Save settings to Folder.

So all you need to do is save your settings first and load it after you reinstalled your OS.

If the Save settings to Folder is disabled, select a folder (e.g. empty) in the Load preferences from a custom folder or URL: text box.

In iTerm2 3.3 on OSX the sequence is: iTerm2 menu, Preferences, General tab, Preferences subtab

New answer for iTerm2 Build 3.3.4 users:

Step 1: (macOS X) System Preferences > Keyboard > Shortcuts tab > Select Mission Control (left panel) > Uncheck shortcuts that labeled as "Move left a space" and "Move right a space"

Step 2: (iTerm2 Build 3.3.4) Preferences > Profiles > Select * Default (left panel) > Keys tab > Delete both "?->" and "?<-" entries > Set both "Left Option (?) Key:" and "Right Option (?) Key:" to Esc+

No messing around with shell profiles, no messing around with inferior masOS (default) Terminal, no awkwards Esc+F/B, rinse & repeat non-sense.

Done deal!!!

Enjoy this tip, my fellow PROGRAMMERS!

if (date.isBefore(endDate) 
 && date.isAfter(startDate) 
 || (date.isSame(startDate) || date.isSame(endDate))

is logically the same as

if (!(date.isBefore(startDate) || date.isAfter(endDate)))

which saves you a couple of lines of code and (in some cases) method calls.

Might be easier than pulling in a whole plugin if you only want to do this once or twice.

In my case, I was using S3 (uppercase) as service name when making request using postman in AWS signature Authorization method

Before actually answering your question:

Parameters in a URL (e.g. key=listOfUsers/user1) are GET parameters and you shouldn't be using them for POST requests. A quick explanation of the difference between GET and POST can be found here.

In your case, to make use of REST principles, you should probably have:

http://ip:5000/users
http://ip:5000/users/<user_id>

Then, on each URL, you can define the behaviour of different HTTP methods (GET, POST, PUT, DELETE). For example, on /users/<user_id>, you want the following:

GET /users/<user_id> - return the information for <user_id>
POST /users/<user_id> - modify/update the information for <user_id> by providing the data
PUT - I will omit this for now as it is similar enough to `POST` at this level of depth
DELETE /users/<user_id> - delete user with ID <user_id> 

So, in your example, you want do a POST to /users/user_1 with the POST data being "John". Then the XPath expression or whatever other way you want to access your data should be hidden from the user and not tightly couple to the URL. This way, if you decide to change the way you store and access data, instead of all your URL's changing, you will simply have to change the code on the server-side.

Now, the answer to your question: Below is a basic semi-pseudocode of how you can achieve what I mentioned above:

from flask import Flask
from flask import request

app = Flask(__name__)

@app.route('/users/<user_id>', methods = ['GET', 'POST', 'DELETE'])
def user(user_id):
    if request.method == 'GET':
        """return the information for <user_id>"""
        .
        .
        .
    if request.method == 'POST':
        """modify/update the information for <user_id>"""
        # you can use <user_id>, which is a str but could
        # changed to be int or whatever you want, along
        # with your lxml knowledge to make the required
        # changes
        data = request.form # a multidict containing POST data
        .
        .
        .
    if request.method == 'DELETE':
        """delete user with ID <user_id>"""
        .
        .
        .
    else:
        # POST Error 405 Method Not Allowed
        .
        .
        .

There are a lot of other things to consider like the POST request content-type but I think what I've said so far should be a reasonable starting point. I know I haven't directly answered the exact question you were asking but I hope this helps you. I will make some edits/additions later as well.

Thanks and I hope this is helpful. Please do let me know if I have gotten something wrong.

Actually, this has nothing to do with the usual Windows / Unix \r\n vs \n issue. The TELNET procotol itself defines \r\n as the end-of-line sequence, independently of the operating system. See RFC854.

Dir.entries(folder)

example:

Dir.entries(".")

Source: http://ruby-doc.org/core/classes/Dir.html#method-c-entries

I think the Default place for IIS logging is: c:\inetpub\wwwroot\log\w3svc

The only subquery appears to be this - try adding a ROWNUM limit to the where to be sure:

(SELECT C.I_WORKDATE
         FROM T_COMPENSATION C
         WHERE C.I_COMPENSATEDDATE = A.I_REQDATE AND ROWNUM <= 1
         AND C.I_EMPID = A.I_EMPID)

You do need to investigate why this isn't unique, however - e.g. the employee might have had more than one C.I_COMPENSATEDDATE on the matched date.

For performance reasons, you should also see if the lookup subquery can be rearranged into an inner / left join, i.e.

 SELECT 
    ...
    REPLACE(TO_CHAR(C.I_WORKDATE, 'DD-Mon-YYYY'),
            ' ',
            '') AS WORKDATE,
    ...
 INNER JOIN T_EMPLOYEE_MS E
    ...
     LEFT OUTER JOIN T_COMPENSATION C
          ON C.I_COMPENSATEDDATE = A.I_REQDATE
          AND C.I_EMPID = A.I_EMPID
    ...

The Google style guide contains an excellent Python style guide. It includes conventions for readable docstring syntax that offers better guidance than PEP-257. For example:

def square_root(n):
    """Calculate the square root of a number.

    Args:
        n: the number to get the square root of.
    Returns:
        the square root of n.
    Raises:
        TypeError: if n is not a number.
        ValueError: if n is negative.

    """
    pass

I like to extend this to also include type information in the arguments, as described in this Sphinx documentation tutorial. For example:

def add_value(self, value):
    """Add a new value.

       Args:
           value (str): the value to add.
    """
    pass

There isn't any need to install the JDK, which is the developer kit, just the JRE which is the runtime environment.

list.Items.add(new ListBoxItem("name", "value"));

The internal (default) data structure of the ListBox is the ListBoxItem.

$(".overdue").each( function() {
    alert("Your book is overdue.");
});

Note that ".addClass()" works because addClass is a function defined on the jQuery object. You can't just plop any old function on the end of a selector and expect it to work.

Also, probably a bad idea to bombard the user with n popups (where n = the number of books overdue).

Perhaps use the size function:

alert( "You have " + $(".overdue").size() + " books overdue." );

There are multiple horizontal centering methods in Bootstrap 4...

• text-center for center display:inline elements
• offset-* or mx-auto can be used to center column (col-*)
• or, justify-content-center on the row to center columns (col-*)
• mx-auto for centering display:block elements inside d-flex

mx-auto (auto x-axis margins) will center display:block or display:flex elements that have a defined width, (%, vw, px, etc..). Flexbox is used by default on grid columns, so there are also various flexbox centering methods.

Demo of the Bootstrap 4 Centering Methods

In your case, use mx-auto to center the col-3 and text-center to center it's content..

<div class="row">
    <div class="col-3 mx-auto">
        <div class="text-center">
            center
        </div>
    </div>
</div>

https://codeply.com/go/GRUfnxl3Ol

or, using justify-content-center on flexbox elements (.row):

<div class="container">
    <div class="row justify-content-center">
        <div class="col-3 text-center">
            center
        </div>
    </div>
</div>

Also see:
Vertical Align Center in Bootstrap 4

IsSyncronizedWithCurrent=False will make it work.

I was facing the same issue. I noticed that in my index i had both the "on device ready" and the "document.ready" function, so removing one of them fixed my problem :)

Use the facebook lintter available here. http://developers.facebook.com/tools/lint/

This will check your link and re fetch any images. this also clears any old cache.

Or try this - https://developers.facebook.com/tools/debug

so long as your html content doesn't need to contain a CDATA element, you can contain the HTML in a CDATA element, otherwise you'll have to escape the XML entities.

<element><![CDATA[<p>your html here</p>]]></element>

VS

<element>&lt;p&gt;your html here&lt;/p&gt;</element>

I solved this with this simple method

function changeSource(url) {
   var video = document.getElementById('video');
   video.src = url;
   video.play();
}

shell_exec('mv filename dest_filename');

This is how you can nest multiple bool queries in one outer bool query this using Kibana,

• bool indicates we are using boolean
• must is for AND
• should is for OR

GET my_inedx/my_type/_search
{
  "query" : {
     "bool": {             //bool indicates we are using boolean operator
          "must" : [       //must is for **AND**
               {
                 "match" : {
                       "description" : "some text"  
                   }
               },
               {
                  "match" :{
                        "type" : "some Type"
                   }
               },
               {
                  "bool" : {          //here its a nested boolean query
                        "should" : [  //should is for **OR**
                               {
                                 "match" : {
                                     //ur query
                                }
                               },
                               { 
                                  "match" : {} 
                               }     
                             ]
                        }
               }
           ]
      }
  }
}

This is how you can nest a query in ES

There are more types in "bool" like,

1. Filter
2. must_not

1. Open the SQL Server Configuration Manager.... 2.Check wheather TCP and UDP are running or not.... 3.If not running , Please enable them and also check the SQL Server Browser is running or not.If not running turn it on.....

2. Next you have to check which ports TCP and UDP is using. You have to open those ports from your windows firewall.....

5.Click here to see the steps to open a specific port in windows firewall....

6. Now SQL Server is ready to access over LAN.......

7. If you wan to access it remotely (over internet) , you have to do another job that is 'Port Forwarding'. You have open the ports TCP and UDP is using in SQL Server on your router. Now the configuration of routers are different. If you give me the details of your router (i. e name of the company and version ) , I can show you the steps how to forward a specific port.

As of 2021 insted of null i had to add {} in order to make it work!

axios.post(
        url,
        {},
        {
          params: {
            key,
            checksum
          }
        }
      )
      .then(response => {
        return success(response);
      })
      .catch(error => {
        return fail(error);
      });

Use:

mysqldump --extended-insert=FALSE 

Be aware that multiple inserts will be slower than one big insert.

you spelt it wrongly, it should be " getElementsByClassName ",

var objs = document.getElementsByClassName("stopButton");
var stopMusicExt = objs[0]; //retrieve the first node in the stack

//your remaining function goes down here.. 
document['player'].stopMusicExt(ta.value);
ta.value = "";

document.getElementsByClassName - returns a stack of nodes with more than one item, since CLASS attributes are used to assign to multiple objects...

const string strCmdText = "/C command1&command2";
Process.Start("CMD.exe", strCmdText);

The StreamReader.CurrentEncoding property rarely returns the correct text file encoding for me. I've had greater success determining a file's endianness, by analyzing its byte order mark (BOM). If the file does not have a BOM, this cannot determine the file's encoding.

*UPDATED 4/08/2020 to include UTF-32LE detection and return correct encoding for UTF-32BE

/// <summary>
/// Determines a text file's encoding by analyzing its byte order mark (BOM).
/// Defaults to ASCII when detection of the text file's endianness fails.
/// </summary>
/// <param name="filename">The text file to analyze.</param>
/// <returns>The detected encoding.</returns>
public static Encoding GetEncoding(string filename)
{
    // Read the BOM
    var bom = new byte[4];
    using (var file = new FileStream(filename, FileMode.Open, FileAccess.Read))
    {
        file.Read(bom, 0, 4);
    }

    // Analyze the BOM
    if (bom[0] == 0x2b && bom[1] == 0x2f && bom[2] == 0x76) return Encoding.UTF7;
    if (bom[0] == 0xef && bom[1] == 0xbb && bom[2] == 0xbf) return Encoding.UTF8;
    if (bom[0] == 0xff && bom[1] == 0xfe && bom[2] == 0 && bom[3] == 0) return Encoding.UTF32; //UTF-32LE
    if (bom[0] == 0xff && bom[1] == 0xfe) return Encoding.Unicode; //UTF-16LE
    if (bom[0] == 0xfe && bom[1] == 0xff) return Encoding.BigEndianUnicode; //UTF-16BE
    if (bom[0] == 0 && bom[1] == 0 && bom[2] == 0xfe && bom[3] == 0xff) return new UTF32Encoding(true, true);  //UTF-32BE

    // We actually have no idea what the encoding is if we reach this point, so
    // you may wish to return null instead of defaulting to ASCII
    return Encoding.ASCII;
}

A comparison between the different Visual Studio Express editions can be found at Visual Studio Express (archive.org link). The difference between Windows and Windows Desktop is that with the Windows edition you can build Windows Store Apps (using .NET, WPF/XAML) while the Windows Desktop edition allows you to write classic Windows Desktop applications. It is possible to install both products on the same machine.

Visual Studio Express 2010 allows you to build Windows Desktop applications. Writing Windows Store applications is not possible with this product.

For learning I would suggest Notepad and the command line. While an IDE provides significant productivity enhancements to professionals, it can be intimidating to a beginner. If you want to use an IDE nevertheless I would recommend Visual Studio Express 2013 for Windows Desktop.

• Visual Studio Community 2013
• Visual Studio Community 2015
• Visual Studio Community 2017

There is no "previous" sibling selector unfortunately, but you can possibly still get the same effect by using positioning (e.g. float right). It depends on what you are trying to do.

In my case, I wanted a primarily CSS 5-star rating system. I would need to color (or swap the icon of) the previous stars. By floating each element right, I am essentially getting the same effect (the html for the stars thus must be written 'backwards').

I'm using FontAwesome in this example and swapping between the unicodes of fa-star-o and fa-star http://fortawesome.github.io/Font-Awesome/

CSS:

.fa {
    display: inline-block;
    font-family: FontAwesome;
    font-style: normal;
    font-weight: normal;
    line-height: 1;
    -webkit-font-smoothing: antialiased;
    -moz-osx-font-smoothing: grayscale;
}

/* set all stars to 'empty star' */
.stars-container {
    display: inline-block;      
}   

/* set all stars to 'empty star' */
.stars-container .star {
    float: right;
    display: inline-block;
    padding: 2px;
    color: orange;
    cursor: pointer;

}

.stars-container .star:before {
    content: "\f006"; /* fontAwesome empty star code */
}

/* set hovered star to 'filled star' */
.star:hover:before{
    content: "\f005"; /* fontAwesome filled star code */
}

/* set all stars after hovered to'filled star' 
** it will appear that it selects all after due to positioning */
.star:hover ~ .star:before {
    content: "\f005"; /* fontAwesome filled star code */
}

HTML: (40)

JSFiddle: http://jsfiddle.net/andrewleyva/88j0105g/

Put a progress bar and the webview inside a relativelayout and set the properties for the progress bar as follows,

1. Make its visibility as GONE.
2. CENTRE it in the Relativelayout.

and then in onPageStarted() of the webclient make the progress bar visible so that it shows the progressbar when you have clicked on a link. In onPageFinished() make the progress bar visiblility as GONE so that it disappears when the page has finished loading... This will work fine for your scenario. Hope this helps...

NO. It's not possible to change height of a select dropdown because that property is browser specific.

However if you want that functionality, then there are many options. You can use bootstrap dropdown-menu and define it's max-height property. Something like this.

$('.dropdown-menu').on( 'click', 'a', function() {_x000D_
    var text = $(this).html();_x000D_
    var htmlText = text + ' <span class="caret"></span>';_x000D_
    $(this).closest('.dropdown').find('.dropdown-toggle').html(htmlText);_x000D_
});

.dropdown-menu {_x000D_
    max-height: 146px;_x000D_
    overflow: scroll;_x000D_
    overflow-x: hidden;_x000D_
    margin-top: 0px;_x000D_
}_x000D_
_x000D_
.caret {_x000D_
   float: right;_x000D_
    margin-top: 5%;_x000D_
}_x000D_
_x000D_
#menu1 {_x000D_
    width: 160px; _x000D_
    text-align: left;_x000D_
}

<link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css">_x000D_
  <script src="https://ajax.googleapis.com/ajax/libs/jquery/3.2.1/jquery.min.js"></script>_x000D_
  <script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js"></script>_x000D_
   _x000D_
<div class="container" style="margin:10px">_x000D_
  <div class="dropdown">_x000D_
    <button class="btn btn-default dropdown-toggle" type="button" id="menu1" data-toggle="dropdown">Tutorials_x000D_
    <span class="caret"></span></button>_x000D_
    <ul class="dropdown-menu" role="menu" aria-labelledby="menu1">_x000D_
      <li><a href="#">HTML</a></li>_x000D_
      <li><a href="#">CSS</a></li>_x000D_
      <li><a href="#">JavaScript</a></li>_x000D_
      <li><a href="#">About Us</a></li>_x000D_
      <li><a href="#">HTML</a></li>_x000D_
      <li><a href="#">CSS</a></li>_x000D_
      <li><a href="#">JavaScript</a></li>_x000D_
      <li><a href="#">About Us</a></li>_x000D_
      <li><a href="#">HTML</a></li>_x000D_
      <li><a href="#">CSS</a></li>_x000D_
      <li><a href="#">JavaScript</a></li>_x000D_
      <li><a href="#">About Us</a></li>_x000D_
      <li><a href="#">HTML</a></li>_x000D_
      <li><a href="#">CSS</a></li>_x000D_
      <li><a href="#">JavaScript</a></li>_x000D_
      <li><a href="#">About Us</a></li>_x000D_
      <li><a href="#">HTML</a></li>_x000D_
      <li><a href="#">CSS</a></li>_x000D_
      <li><a href="#">JavaScript</a></li>_x000D_
      <li><a href="#">About Us</a></li>_x000D_
      <li><a href="#">HTML</a></li>_x000D_
      <li><a href="#">CSS</a></li>_x000D_
      <li><a href="#">JavaScript</a></li>_x000D_
      <li><a href="#">About Us</a></li>_x000D_
    </ul>_x000D_
  </div>_x000D_
</div>

Most of the time, in enterprise applications the Java heap given is larger than the ideal size of max 12 to 16 GB. I have found it hard to make the NetBeans profiler work directly on these big java apps.

But usually this is not needed. You can use the jmap utility that comes with the jdk to take a "live" heap dump , that is jmap will dump the heap after running GC. Do some operation on the application, wait till the operation is completed, then take another "live" heap dump. Use tools like Eclipse MAT to load the heapdumps, sort on the histogram, see which objects have increased, or which are the highest, This would give a clue.

su  proceeuser
/bin/jmap -dump:live,format=b,file=/tmp/2930javaheap.hrpof 2930(pid of process)

There is only one problem with this approach; Huge heap dumps, even with the live option, may be too big to transfer out to development lap, and may need a machine with enough memory/RAM to open.

That is where the class histogram comes into picture. You can dump a live class histogram with the jmap tool. This will give only the class histogram of memory usage.Basically it won't have the information to chain the reference. For example it may put char array at the top. And String class somewhere below. You have to draw the connection yourself.

jdk/jdk1.6.0_38/bin/jmap -histo:live 60030 > /tmp/60030istolive1330.txt

Instead of taking two heap dumps, take two class histograms, like as described above; Then compare the class histograms and see the classes that are increasing. See if you can relate the Java classes to your application classes. This will give a pretty good hint. Here is a pythons script that can help you compare two jmap histogram dumps. histogramparser.py

Finally tools like JConolse and VisualVm are essential to see the memory growth over time, and see if there is a memory leak. Finally sometimes your problem may not be a memory leak , but high memory usage.For this enable GC logging;use a more advanced and new compacting GC like G1GC; and you can use jdk tools like jstat to see the GC behaviour live

jstat -gccause pid <optional time interval>

Other referecences to google for -jhat, jmap, Full GC, Humongous allocation, G1GC

You have two choices here. The first is to have two result sets which will set 'Test1' or 'Test2' based on the condition in the WHERE clause, and then UNION them together:

select 
    'Test1', * 
from 
    TABLE 
Where 
    CCC='D' AND DDD='X' AND exists(select ...)
UNION
select 
    'Test2', * 
from 
    TABLE
Where
    CCC<>'D' AND DDD='X' AND exists(select ...)

This might be an issue, because you are going to effectively scan/seek on TABLE twice.

The other solution would be to select from the table once, and set 'Test1' or 'Test2' based on the conditions in TABLE:

select 
    case 
        when CCC='D' AND DDD='X' AND exists(select ...) then 'Test1'
        when CCC<>'D' AND DDD='X' AND exists(select ...) then 'Test2'
    end,
    * 
from 
    TABLE 
Where 
    (CCC='D' AND DDD='X' AND exists(select ...)) or
    (CCC<>'D' AND DDD='X' AND exists(select ...))

The catch here being that you will have to duplicate the filter conditions in the CASE statement and the WHERE statement.

I use npm-check to achieve this.

npm i -g npm npm-check
npm-check -ug #to update globals
npm-check -u #to update locals

Another useful command list which will keep exact version numbers in package.json

npm cache clean
rm -rf node_modules/
npm i -g npm npm-check-updates
ncu -g #update globals
ncu -ua #update locals
npm i

For the following method:

   private static void StringVsVarILOutput()
    {
        var string1 = new String(new char[9]);

        string string2 = new String(new char[9]);
    }

The IL Output is this:

        {
          .method private hidebysig static void  StringVsVarILOutput() cil managed
          // Code size       28 (0x1c)
          .maxstack  2
          .locals init ([0] string string1,
                   [1] string string2)
          IL_0000:  nop
          IL_0001:  ldc.i4.s   9
          IL_0003:  newarr     [mscorlib]System.Char
          IL_0008:  newobj     instance void [mscorlib]System.String::.ctor(char[])
          IL_000d:  stloc.0
          IL_000e:  ldc.i4.s   9
          IL_0010:  newarr     [mscorlib]System.Char
          IL_0015:  newobj     instance void [mscorlib]System.String::.ctor(char[])
          IL_001a:  stloc.1
          IL_001b:  ret
        } // end of method Program::StringVsVarILOutput

I was receiving the same error when not specifying the app name before pattern name. In my case:

app-name : Blog

pattern-name : post-delete

reverse_lazy('Blog:post-delete') worked.

Run:

pip  list

You should get a list of packages (including panda) and their versions, e.g.:

beautifulsoup4 (4.5.1)
cycler (0.10.0)
jdcal (1.3)
matplotlib (1.5.3)
numpy (1.11.1)
openpyxl (2.2.0b1)
pandas (0.18.1)
pip (8.1.2)
pyparsing (2.1.9)
python-dateutil (2.2)
python-nmap (0.6.1)
pytz (2016.6.1)
requests (2.11.1)
setuptools (20.10.1)
six (1.10.0)
SQLAlchemy (1.0.15)
xlrd (1.0.0)

you can use the following code:

if(Platform.Equals("WinCE"))
{
    m_CurrentPath = Path.GetDirectoryName(Assembly.GetExecutingAssembly().GetName().CodeBase);
}
else if(Platform.Equals("Win32NT"))
{
    m_CurrentPath = Directory.GetCurrentDirectory();
}

more information see: Get Current Directory Path in both WinXP and WinCE with C#

You can also try this

Private Declare Function GetWindowText Lib "user32.dll" (ByVal hwnd As IntPtr, ByVal lpString As StringBuilder, ByVal cch As Integer) As Integer

I always use Declare Function instead of DllImport... Its more simply, its shorter and does the same

use adb Shell Commands to simulate the touch event

adb shell input tap x y 

and also 

adb shell sendevent /dev/input/event0 3 0 5 
adb shell sendevent /dev/input/event0 3 1 29 

Open sFileName For Input As iFileNum

Dim LineNum As Long
LineNum = 0

Do While Not EOF(iFileNum)
  LineNum = LineNum + 1
  Line Input #iFileNum, Fields
  If LineNum > 2 Then
    DoStuffWith(Fields)
  End If
Loop

CREATE [TEMPORARY] TABLE [IF NOT EXISTS] tbl_name
[(create_definition,...)]
[table_options]
select_statement

Example :

CREATE TEMPORARY TABLE IF NOT EXISTS mytable
(id int(11) NOT NULL, PRIMARY KEY (id)) ENGINE=MyISAM;
INSERT IGNORE INTO mytable SELECT id FROM table WHERE xyz;

"C:\Program Files\PuTTY\pscp.exe" -scp file.py server.com:

file.py will be uploaded into your HOME dir on remote server.

or when the remote server has a different user, use "C:\Program Files\PuTTY\pscp.exe" -l username -scp file.py server.com:

After connecting to the server pscp will ask for a password.

You can use self.data in the clean_email method to access the POST data before validation. It should contain a key called newsletter_sub or newsletter_unsub depending on which button was pressed.

# in the context of a django.forms form

def clean(self):
    if 'newsletter_sub' in self.data:
        # do subscribe
    elif 'newsletter_unsub' in self.data:
        # do unsubscribe

Just rebuild and clean project, then run project.

Improving on Andru's idea, you can write a script which creates console functions if they don't exist:

if (!window.console) console = {};
console.log = console.log || function(){};
console.warn = console.warn || function(){};
console.error = console.error || function(){};
console.info = console.info || function(){};

Then, use any of the following:

console.log(...);
console.error(...);
console.info(...);
console.warn(...);

These functions will log different types of items (which can be filtered based on log, info, error or warn) and will not cause errors when console is not available. These functions will work in Firebug and Chrome consoles.

function filesModelDirective(){
  return {
    controller: function($parse, $element, $attrs, $scope){
      var exp = $parse($attrs.filesModel);
      $element.on('change', function(){
        exp.assign($scope, this.files[0]);
        $scope.$apply();
      });
    }
  };
}
app.directive('filesModel', filesModelDirective);

You are using aggregate function which not getting the items to perform action , you must verify linq query is giving some result as below:

var maxOrderLevel =sdv.Any()? sdv.Max(s => s.nOrderLevel):0

This one Works for me with asp label control.

 function changeEmaillbl() {


         if (document.getElementById('<%=rbAgency.ClientID%>').checked = true) {
             document.getElementById('<%=lblUsername.ClientID%>').innerHTML = 'Accredited No.:';
         } 
     }

in my case i did following steps and it worked:

1. In Xampp control panel click on "Services" button from the right side toolbar

2. Then find "MySQL" from the services List

3. Click on it and from the left side of the panel click on "stop"

4. Turn back in Xampp control panel and click on start.

The FileInfo class' Length property returns the size of the file (not the size on disk). If you want a formatted file size (i.e. 15 KB) rather than a long byte value you can use CSharpLib, a package I've made that adds more functionality to the FileInfo class. Here's an example:

using CSharpLib;
FileInfo info = new FileInfo("sample.txt");
Console.WriteLine(info.FormatBytes());  // Output: 15 MB

If the string contains Unicode data (strictly speaking, non-BMP characters) the other methods that have been posted will corrupt it, because you cannot swap the order of high and low surrogate code units when reversing the string. (More information about this can be found on my blog.)

The following code sample will correctly reverse a string that contains non-BMP characters, e.g., "\U00010380\U00010381" (Ugaritic Letter Alpa, Ugaritic Letter Beta).

public static string Reverse(this string input)
{
    if (input == null)
        throw new ArgumentNullException("input");

    // allocate a buffer to hold the output
    char[] output = new char[input.Length];
    for (int outputIndex = 0, inputIndex = input.Length - 1; outputIndex < input.Length; outputIndex++, inputIndex--)
    {
        // check for surrogate pair
        if (input[inputIndex] >= 0xDC00 && input[inputIndex] <= 0xDFFF &&
            inputIndex > 0 && input[inputIndex - 1] >= 0xD800 && input[inputIndex - 1] <= 0xDBFF)
        {
            // preserve the order of the surrogate pair code units
            output[outputIndex + 1] = input[inputIndex];
            output[outputIndex] = input[inputIndex - 1];
            outputIndex++;
            inputIndex--;
        }
        else
        {
            output[outputIndex] = input[inputIndex];
        }
    }

    return new string(output);
}

Creating a separate directive for this is not needed. There is already a build in Angular UI password validation tool. With this you could do:

<input name="password" required ng-model="password">
<input name="confirm_password"
       ui-validate=" '$value==password' "
       ui-validate-watch=" 'password' ">

 Passwords match? {{!!form.confirm_password.$error.validator}}

#include? should work, it works for general objects, not only strings. Your problem in example code is this test:

unless @suggested_horses.exists?(horse.id)
  @suggested_horses<< horse
end

(even assuming using #include?). You try to search for specific object, not for id. So it should be like this:

unless @suggested_horses.include?(horse)
  @suggested_horses << horse
end

ActiveRecord has redefined comparision operator for objects to take a look only for its state (new/created) and id

This isn't related to your question, but you want to use = and not <- within the function call. If you use <-, you'll end up creating variables y1 and y2 in whatever environment you're working in:

d1 <- data.frame(y1 <- c(1, 2, 3), y2 <- c(4, 5, 6))
y1
# [1] 1 2 3
y2
# [1] 4 5 6

This won't have the seemingly desired effect of creating column names in the data frame:

d1
#   y1....c.1..2..3. y2....c.4..5..6.
# 1                1                4
# 2                2                5
# 3                3                6

The = operator, on the other hand, will associate your vectors with arguments to data.frame.

As for your question, making a list of data frames is easy:

d1 <- data.frame(y1 = c(1, 2, 3), y2 = c(4, 5, 6))
d2 <- data.frame(y1 = c(3, 2, 1), y2 = c(6, 5, 4))
my.list <- list(d1, d2)

You access the data frames just like you would access any other list element:

my.list[[1]]
#   y1 y2
# 1  1  4
# 2  2  5
# 3  3  6

use this.getClass().getName() to get packageName.className and use this.getClass().getSimpleName() to get only class name

Firstly a warning: you should never tinker with DOM that is managed by React, which you are doing by calling ReactDOM.render(<SampleComponent ... />);

With React, you should use SampleComponent directly in the main App.

var App = require('./App.js');
var SampleComponent = require('./SampleComponent.js');
ReactDOM.render(<App/>, document.body);

The content of your Component is irrelevant, but it should be used like this:

var App = React.createClass({
    render: function() {
        return (
            <div>
                <h1>App main component! </h1>
                <SampleComponent name="SomeName"/>
            </div>
        );
    }
});

You can then extend your app component to use a list.

var App = React.createClass({
    render: function() {
        var componentList = [
            <SampleComponent name="SomeName1"/>,
            <SampleComponent name="SomeName2"/>
        ]; // Change this to get the list from props or state
        return (
            <div>
                <h1>App main component! </h1>
                {componentList}
            </div>
        );
    }
});

I would really recommend that you look at the React documentation then follow the "Get Started" instructions. The time you spend on that will pay off later.

https://facebook.github.io/react/index.html

Try this,

this.props.router.push('/foo')

warning works for versions prior to v4

and

this.props.history.push('/foo')

for v4 and above

HTML / HTTP is stateless, in other words, what you did / saw on the previous page, is completely unconnected with the current page. Except if you use something like sessions, cookies or GET / POST variables. Sessions and cookies are quite easy to use, with session being by far more secure than cookies. More secure, but not completely secure.

Session:

//On page 1
$_SESSION['varname'] = $var_value;

//On page 2
$var_value = $_SESSION['varname'];

Remember to run the session_start(); statement on both these pages before you try to access the $_SESSION array, and also before any output is sent to the browser.

Cookie:

//One page 1
$_COOKIE['varname'] = $var_value;

//On page 2
$var_value = $_COOKIE['varname'];

The big difference between sessions and cookies is that the value of the variable will be stored on the server if you're using sessions, and on the client if you're using cookies. I can't think of any good reason to use cookies instead of sessions, except if you want data to persist between sessions, but even then it's perhaps better to store it in a DB, and retrieve it based on a username or id.

GET and POST

You can add the variable in the link to the next page:

<a href="page2.php?varname=<?php echo $var_value ?>">Page2</a>

This will create a GET variable.

Another way is to include a hidden field in a form that submits to page two:

<form method="get" action="page2.php">
    <input type="hidden" name="varname" value="var_value">
    <input type="submit">
</form>

And then on page two:

//Using GET
$var_value = $_GET['varname'];

//Using POST
$var_value = $_POST['varname'];

//Using GET, POST or COOKIE.
$var_value = $_REQUEST['varname'];

Just change the method for the form to post if you want to do it via post. Both are equally insecure, although GET is easier to hack.

The fact that each new request is, except for session data, a totally new instance of the script caught me when I first started coding in PHP. Once you get used to it, it's quite simple though.

You're missing *s in the last two terms of your expression, so R is interpreting (e.g.) 0.207 (log(DIAM93))^2 as an attempt to call a function named 0.207 ...

For example:

> 1 + 2*(3)
[1] 7
> 1 + 2 (3)

Error: attempt to apply non-function

Your (unreproducible) expression should read:

censusdata_20$AGB93 = WD * exp(-1.239 + 1.980 * log (DIAM93) + 
                              0.207* (log(DIAM93))^2  -
                              0.0281*(log(DIAM93))^3)

Mathematica is the only computer system I know of that allows juxtaposition to be used for multiplication ...

If you are working over boot projects and you wanna configure the port you can give the input in the application.properties file like NOTE:properties file should be under src/main/resource

Spring properties

server.port=9999 If you using the CMD then follow this command -Dserver.port=9999 For default port its server.port=0 Make sure no port is using this port number

if you're connecting to a postgres database, the following works:

result = cursor.execute(query)

if result.returns_rows:
    # we got rows!
    return [{k:v for k,v in zip(result.keys(), r)} for r in result.rows]
else:
    return None

No, you do not need to check whether you’re already on the main thread. By dispatching the block to the main queue, you’re just scheduling the block to be executed serially on the main thread, which happens when the corresponding run loop is run.

If you already are on the main thread, the behaviour is the same: the block is scheduled, and executed when the run loop of the main thread is run.

I was doing some volume rendering in octave (matlab clone) and building my 3D arrays (ie an array of 2d slices) using

buffer=zeros(1,512*512*512,"uint16");
vol=reshape(buffer,512,512,512);

Memory consumption seemed to be efficient. (can't say the same for the subsequent speed of computations :^)

This is heavily based on the @Galen version above, however, I wanted to add range control that could limit the colour produced to be red, green, blue, lighter or darker. It might be of use to others.

function random_colour_part($lower, $upper)
{
    //randomly select colour in range and convert to hexidecimal
    return str_pad(dechex(mt_rand($lower, $upper)), 2, '0', STR_PAD_LEFT);
}

function random_colour($colour)
{
    //loop through colour
    foreach ($colour as $key => $value)
    {
        //retrieve each r,g,b colour range and generate random hexidecimal colour
        if ($key == "r") $r = random_colour_part($value[0], $value[1]);
        if ($key == "g") $g = random_colour_part($value[0], $value[1]);
        if ($key == "b") $b = random_colour_part($value[0], $value[1]);
    }

    //return hexidecimal colour
    return "#" . $r . $g . $b;
}

//generate a random red-based colour
echo random_colour(["r"=>[0,255], "g"=>[0,0], "b"=>[0,0]]);

//generate a random light green-based colour (use only half of the 255 range)
echo random_colour(["r"=>[0,0], "g"=>[127,255], "b"=>[0,0]]);

//generate a random colour of any sort
echo random_colour(["r"=>[0,255], "g"=>[0,255], "b"=>[0,255]]);

Ori Drori's comment is correct, you aren't doing this the "React Way". In React, you should ideally not be changing classes and event handlers using the DOM. Do it in the render() method of your React components; in this case that would be the sideNav and your Header. A rough example of how this would be done in your code is as follows.

HEADER

class Header extends React.Component {
constructor(props){
    super(props);
}

render() {
    return (
        <div className="header">
            <i className="border hide-on-small-and-down"></i>
            <div className="container">
                <a ref="btn" href="#" className="btn-menu show-on-small"
                onClick=this.showNav><i></i></a>
                <Menu className="menu hide-on-small-and-down"/>
                <Sidenav ref="sideNav"/>
            </div>
        </div>
    )
}

showNav() {
  this.refs.sideNav.show();
}
}

SIDENAV

 class SideNav extends React.Component {
   constructor(props) {
     super(props);
     this.state = {
       open: false
     }
   }

   render() {
     if (this.state.open) {
       return ( 
         <div className = "sideNav">
            This is a sidenav 
         </div>
       )
     } else {
       return null;
     }

   }

   show() {
     this.setState({
       open: true
     })
   }
 }

You can see here that we are not toggling classes but using the state of the components to render the SideNav. This way, or similar is the whole premise of using react. If you are using bootstrap, there is a library which integrates bootstrap elements with the react way of doing things, allowing you to use the same elements but set state on them instead of directly manipulating the DOM. It can be found here - https://react-bootstrap.github.io/

Hope this helps, and enjoy using React!

In response to the original question, you are using for/in incorrectly. In your code, key is the index. So, to get the value from the pseudo-array, you'd have to do list[key] and to get the id, you'd do list[key].id. But, you should not be doing this with for/in in the first place.

Summary (added in Dec 2018)

Do not ever use for/in to iterate a nodeList or an HTMLCollection. The reasons to avoid it are described below.

All recent versions of modern browsers (Safari, Firefox, Chrome, Edge) all support for/of iteration on DOM lists such nodeList or HTMLCollection.

Here's an example:

var list = document.getElementsByClassName("events");
for (let item of list) {
    console.log(item.id);
}

To include older browsers (including things like IE), this will work everywhere:

var list= document.getElementsByClassName("events");
for (var i = 0; i < list.length; i++) {
    console.log(list[i].id); //second console output
}

Explanation For Why You Should Not Use for/in

for/in is meant for iterating the properties of an object. That means it will return all iterable properties of an object. While it may appear to work for an array (returning array elements or pseudo-array elements), it can also return other properties of the object that are not what you are expecting from the array-like elements. And, guess what, an HTMLCollection or nodeList object can both have other properties that will be returned with a for/in iteration. I just tried this in Chrome and iterating it the way you were iterating it will retrieve the items in the list (indexes 0, 1, 2, etc...), but also will retrieve the length and item properties. The for/in iteration simply won't work for an HTMLCollection.

See http://jsfiddle.net/jfriend00/FzZ2H/ for why you can't iterate an HTMLCollection with for/in.

In Firefox, your for/in iteration would return these items (all the iterable properties of the object):

0
1
2
item
namedItem
@@iterator
length

Hopefully, now you can see why you want to use for (var i = 0; i < list.length; i++) instead so you just get 0, 1 and 2 in your iteration.

Following below is an evolution of how browsers have evolved through the time period 2015-2018 giving you additional ways to iterate. None of these are now needed in modern browsers since you can use the options described above.

Update for ES6 in 2015

Added to ES6 is Array.from() that will convert an array-like structure to an actual array. That allows one to enumerate a list directly like this:

"use strict";

Array.from(document.getElementsByClassName("events")).forEach(function(item) {
   console.log(item.id);
});

Working demo (in Firefox, Chrome, and Edge as of April 2016): https://jsfiddle.net/jfriend00/8ar4xn2s/

Update for ES6 in 2016

You can now use the ES6 for/of construct with a NodeList and an HTMLCollection by just adding this to your code:

NodeList.prototype[Symbol.iterator] = Array.prototype[Symbol.iterator];
HTMLCollection.prototype[Symbol.iterator] = Array.prototype[Symbol.iterator];

Then, you can do:

var list = document.getElementsByClassName("events");
for (var item of list) {
    console.log(item.id);
}

This works in the current version of Chrome, Firefox, and Edge. This works because it attaches the Array iterator to both the NodeList and HTMLCollection prototypes so that when for/of iterates them, it uses the Array iterator to iterate them.

Working demo: http://jsfiddle.net/jfriend00/joy06u4e/.

Second Update for ES6 in Dec 2016

As of Dec 2016, Symbol.iterator support has been built-in to Chrome v54 and Firefox v50 so the code below works by itself. It is not yet built-in for Edge.

var list = document.getElementsByClassName("events");
for (let item of list) {
    console.log(item.id);
}

Working demo (in Chrome and Firefox): http://jsfiddle.net/jfriend00/3ddpz8sp/

Third Update for ES6 in Dec 2017

As of Dec. 2017, this capability works in Edge 41.16299.15.0 for a nodeList as in document.querySelectorAll(), but not an HTMLCollection as in document.getElementsByClassName() so you have to manually assign the iterator to use it in Edge for an HTMLCollection. It is a total mystery why they'd fix one collection type, but not the other. But, you can at least use the result of document.querySelectorAll() with ES6 for/of syntax in current versions of Edge now.

I've also updated the above jsFiddle so it tests both HTMLCollection and nodeList separately and captures the output in the jsFiddle itself.

Fourth Update for ES6 in Mar 2018

Per mesqueeeb, Symbol.iterator support has been built-in to Safari too, so you can use for (let item of list) for either document.getElementsByClassName() or document.querySelectorAll().

Fifth Update for ES6 in Apr 2018

Apparently, support for iterating an HTMLCollection with for/of will be coming to Edge 18 in Fall 2018.

Sixth Update for ES6 in Nov 2018

I can confirm that with Microsoft Edge v18 (that is included in the Fall 2018 Windows Update), you can now iterate both an HTMLCollection and a NodeList with for/of in Edge.

So, now all modern browsers contain native support for for/of iteration of both the HTMLCollection and NodeList objects.

Just change the first line as follows :

include ActionView::Helpers

that will make it works.

UPDATE: For Rails 3 use:

ActionController::Base.helpers.sanitize(str)

Credit goes to lornc's answer

Creating a profile and then a driver helps us get around the certificate issue in Firefox:

var profile = new FirefoxProfile();
profile.SetPreference("network.automatic-ntlm-auth.trusted-uris","DESIREDURL");
driver = new FirefoxDriver(profile);

In my case, I add file as Link from another project and then rename file in source project that cause problem in destination project. I delete linked file in destination and add again with new name.

• Why not use where instead dir?

In command line:

for /f tokens^=* %i in ('where .:*')do @"%~nxi"

In bat/cmd file:

@echo off 

for /f tokens^=* %%i in ('where .:*')do %%~nxi

• Output:

file_0003.xlsx
file_0001.txt
file_0002.log

where .:*

• Output:

G:\SO_en-EN\Q23228983\file_0003.xlsx
G:\SO_en-EN\Q23228983\file_0001.txt
G:\SO_en-EN\Q23228983\file_0002.log

For recursively:

where /r . *

• Output:

G:\SO_en-EN\Q23228983\file_0003.xlsx
G:\SO_en-EN\Q23228983\file_0001.txt
G:\SO_en-EN\Q23228983\file_0002.log
G:\SO_en-EN\Q23228983\Sub_dir_001\file_0004.docx
G:\SO_en-EN\Q23228983\Sub_dir_001\file_0005.csv
G:\SO_en-EN\Q23228983\Sub_dir_001\file_0006.odt

• For loop get path and name:

• In command line:

for /f tokens^=* %i in ('where .:*')do @echo/ Path: %~dpi ^| Name: %~nxi

• In bat/cmd file:

@echo off 

for /f tokens^=* %%i in ('where .:*')do echo/ Path: %%~dpi ^| Name: %%~nxi

• Output:

 Path: G:\SO_en-EN\Q23228983\ | Name: file_0003.xlsx
 Path: G:\SO_en-EN\Q23228983\ | Name: file_0001.txt
 Path: G:\SO_en-EN\Q23228983\ | Name: file_0002.log

• For loop get path and name recursively:

In command line:

for /f tokens^=* %i in ('where /r . *')do @echo/ Path: %~dpi ^| Name: %~nxi

In bat/cmd file:

@echo off 

for /f tokens^=* %%i in ('where /r . *')do echo/ Path: %%~dpi ^| Name: %%~nxi

• Output:

 Path: G:\SO_en-EN\Q23228983\ | Name: file_0003.xlsx
 Path: G:\SO_en-EN\Q23228983\ | Name: file_0001.txt
 Path: G:\SO_en-EN\Q23228983\ | Name: file_0002.log
 Path: G:\SO_en-EN\Q23228983\Sub_dir_001\ | Name: file_0004.docx
 Path: G:\SO_en-EN\Q23228983\Sub_dir_001\ | Name: file_0005.csv
 Path: G:\SO_en-EN\Q23228983\Sub_dir_001\ | Name: file_0006.odt

• Some further reading:

  [v] Where

  [v] Where sample