In Python 3 the dict.values() method returns a dictionary view object, not a list like it does in Python 2. Dictionary views have a length, can be iterated, and support membership testing, but don't support indexing.

To make your code work in both versions, you could use either of these:

{names[i]:value for i,value in enumerate(d.values())}

    or

values = list(d.values())
{name:values[i] for i,name in enumerate(names)}

By far the simplest, fastest way to do the same thing in either version would be:

dict(zip(names, d.values()))

Note however, that all of these methods will give you results that will vary depending on the actual contents of d. To overcome that, you may be able use an OrderedDict instead, which remembers the order that keys were first inserted into it, so you can count on the order of what is returned by the values() method.

Simple script with code clarity. Save to /usr/local/bin/run:

#!/bin/bash

# run
# Run command with timeout $1 seconds.

# Timeout seconds
timeout_seconds="$1"
shift

# PID
pid=$$

# Start timeout
(
  sleep "$timeout_seconds"
  echo "Timed out after $timeout_seconds seconds"
  kill -- -$pid &>/dev/null
) &
timeout_pid=$!

# Run
"$@"

# Stop timeout
kill $timeout_pid &>/dev/null

Times out a command that runs too long:

$ run 2 sleep 10
Timed out after 2 seconds
Terminated
$

Ends immediately for a command that completes:

$ run 10 sleep 2
$

I faced the same problem on VS 2012 Version 11.0.60610.01 Update 3 on Windows 8

There were no designer windows open and the project was a simple console application.

The removal of the vshost process accessing the file does not work most of the time since the process isn't accessing the file.

The simplest workaround that works and takes the least amount of time is to remove the project from the solution, build another project in the solution and then add the original back.

It's an irritant and waste of time but it's the least expensive of all the other options that I know of.

Hope this helps...

In your destination field you want to use VLOOKUP like so:

=VLOOKUP(Sheet1!A1:A100,Sheet2!A1:F100,6,FALSE)

VLOOKUP Arguments:

1. The set fields you want to lookup.
2. The table range you want to lookup up your value against. The first column of your defined table should be the column you want compared against your lookup field. The table range should also contain the value you want to display (Column F).
3. This defines what field you want to display upon a match.
4. FALSE tells VLOOKUP to do an exact match.

Composition API

Template refs section tells how this has been unified:

• within template, use ref="myEl"; :ref= with a v-for
• within script, have a const myEl = ref(null) and expose it from setup

The reference carries the DOM element from mounting onwards.

map doesn't relate to a Cartesian product at all, although I imagine someone well versed in functional programming could come up with some impossible to understand way of generating a one using map.

map in Python 3 is equivalent to this:

def map(func, iterable):
    for i in iterable:
        yield func(i)

and the only difference in Python 2 is that it will build up a full list of results to return all at once instead of yielding.

Although Python convention usually prefers list comprehensions (or generator expressions) to achieve the same result as a call to map, particularly if you're using a lambda expression as the first argument:

[func(i) for i in iterable]

As an example of what you asked for in the comments on the question - "turn a string into an array", by 'array' you probably want either a tuple or a list (both of them behave a little like arrays from other languages) -

 >>> a = "hello, world"
 >>> list(a)
['h', 'e', 'l', 'l', 'o', ',', ' ', 'w', 'o', 'r', 'l', 'd']
>>> tuple(a)
('h', 'e', 'l', 'l', 'o', ',', ' ', 'w', 'o', 'r', 'l', 'd')

A use of map here would be if you start with a list of strings instead of a single string - map can listify all of them individually:

>>> a = ["foo", "bar", "baz"]
>>> list(map(list, a))
[['f', 'o', 'o'], ['b', 'a', 'r'], ['b', 'a', 'z']]

Note that map(list, a) is equivalent in Python 2, but in Python 3 you need the list call if you want to do anything other than feed it into a for loop (or a processing function such as sum that only needs an iterable, and not a sequence). But also note again that a list comprehension is usually preferred:

>>> [list(b) for b in a]
[['f', 'o', 'o'], ['b', 'a', 'r'], ['b', 'a', 'z']]

When using Class based views, another option is to use the dispatch method. https://docs.djangoproject.com/en/2.2/ref/class-based-views/base/

Example Code:

Settings.py

LOGIN_URL = 'login'
LOGIN_REDIRECT_URL = 'home'

urls.py

from django.urls import path
from django.contrib.auth import views as auth_views
urlpatterns = [
path('', HomeView.as_view(), name='home'),
path('login/', auth_views.LoginView.as_view(),name='login'),
path('logout/', auth_views.LogoutView.as_view(), name='logout'),
]

views.py

from django.utils.decorators import method_decorator
from django.contrib.auth.decorators import login_required
from django.views.generic import View
from django.shortcuts import redirect

@method_decorator([login_required], name='dispatch')
class HomeView(View):
    model = models.User

    def dispatch(self, request, *args, **kwargs):
        if not request.user.is_authenticated:
            return redirect('login')
        elif some-logic:
            return redirect('some-page') #needs defined as valid url
        return super(HomeView, self).dispatch(request, *args, **kwargs)

Replace below characters

~ ! @ # $ % ^ & * ( ) _ +
` - = 
{ } |
[ ] \
: " 
; '

< > ?
, . 

with this SQL

SELECT note as note_original, 

    REPLACE(
        REPLACE(
            REPLACE(
                REPLACE(
                    REPLACE(
                        REPLACE(
                            REPLACE(
                                REPLACE(
                                    REPLACE(
                                        REPLACE(
                                            REPLACE(
                                                REPLACE(
                                                    REPLACE(
                                                        REPLACE(
                                                            REPLACE(
                                                                REPLACE(
                                                                    REPLACE(
                                                                        REPLACE(
                                                                            REPLACE(
                                                                                REPLACE(
                                                                                    REPLACE(
                                                                                        REPLACE(
                                                                                            REPLACE(
                                                                                                REPLACE(
                                                                                                    REPLACE(
                                                                                                        REPLACE(
                                                                    REPLACE(
                                                                        REPLACE(
                                                                            REPLACE(
                                                                                REPLACE(
                                                                                    REPLACE(
                                                                                        REPLACE(
                                                                                            REPLACE(note, '\"', ''),
                                                                                        '.', ''),
                                                                                    '?', ''),
                                                                                '`', ''),
                                                                            '<', ''),
                                                                        '=', ''),
                                                                    '{', ''),
                                                                                                        '}', ''),
                                                                                                    '[', ''),
                                                                                                ']', ''),
                                                                                            '|', ''),
                                                                                        '\'', ''),
                                                                                    ':', ''),
                                                                                ';', ''),
                                                                            '~', ''),
                                                                        '!', ''),
                                                                    '@', ''),
                                                                '#', ''),
                                                            '$', ''),
                                                        '%', ''),
                                                    '^', ''),
                                                '&', ''),
                                            '*', ''),
                                        '_', ''),
                                    '+', ''),
                                ',', ''),
                            '/', ''),
                        '(', ''),
                    ')', ''),
                '-', ''),
            '>', ''),
        ' ', '-'),
    '--', '-') as note_changed FROM invheader

You shouldn't be passing anything in to getCountry(). Remove Locale.getDefault():

String locale = context.getResources().getConfiguration().locale.getCountry();

As per the documentation provided by PHP manual.

On each iteration, the value of the current element is assigned to $v and the internal
array pointer is advanced by one (so on the next iteration, you'll be looking at the next element).

So as per your first example:

$array = ['foo'=>1];
foreach($array as $k=>&$v)
{
   $array['bar']=2;
   echo($v);
}

$array have only single element, so as per the foreach execution, 1 assign to $v and it don't have any other element to move pointer

But in your second example:

$array = ['foo'=>1, 'bar'=>2];
foreach($array as $k=>&$v)
{
   $array['baz']=3;
   echo($v);
}

$array have two element, so now $array evaluate the zero indices and move the pointer by one. For first iteration of loop, added $array['baz']=3; as pass by reference.

You should use

document.documentElement.clientWidth

It is regarded as cross-browser compability, and is the same method that jQuery(window).width(); uses.

For detailed information have a look at: https://ryanve.com/lab/dimensions/

For a multi-threaded problem, we needed a complex object to be built up for each thread. The object represented the data being processed, and could change depending on the user input.

Could we use a factory instead? Yes

Why didn't we? Builder makes more sense I guess.

Factories are used for creating different types of objects that are the same basic type (implement the same interface or base class).

Builders build the same type of object over and over, but the construction is dynamic so it can be changed at runtime.

x is the target angle. y is the source or starting angle:

atan2(sin(x-y), cos(x-y))

It returns the signed delta angle. Note that depending on your API the order of the parameters for the atan2() function might be different.

You can also use shift for individual variables in most cases:

$var1 = shift;

This is a topic in which you should research further as Perl has a number of interesting ways of accessing outside information inside your sub routine.

Add this method to a static class:

 public static Rect GetAbsolutePlacement(this FrameworkElement element, bool relativeToScreen = false)
    {
        var absolutePos = element.PointToScreen(new System.Windows.Point(0, 0));
        if (relativeToScreen)
        {
            return new Rect(absolutePos.X, absolutePos.Y, element.ActualWidth, element.ActualHeight);
        }
        var posMW = Application.Current.MainWindow.PointToScreen(new System.Windows.Point(0, 0));
        absolutePos = new System.Windows.Point(absolutePos.X - posMW.X, absolutePos.Y - posMW.Y);
        return new Rect(absolutePos.X, absolutePos.Y, element.ActualWidth, element.ActualHeight);
    }

Set relativeToScreen paramater to true for placement from top left corner of whole screen or to false for placement from top left corner of application window.

You can as long as

• The value is unique
• No existing foreign keys are violated

I made some changes in above code to look for a location fix by both GPS and Network for about 5sec and give me the best known location out of it.

public class LocationService implements LocationListener {

    boolean isGPSEnabled = false;

    boolean isNetworkEnabled = false;

    boolean canGetLocation = false;

    final static long MIN_TIME_INTERVAL = 60 * 1000L;

    Location location;


    // The minimum distance to change Updates in meters
    private static final long MIN_DISTANCE_CHANGE_FOR_UPDATES = 0; // 10

    // The minimum time between updates in milliseconds
    private static final long MIN_TIME_BW_UPDATES = 1; // 1 minute

    protected LocationManager locationManager;

    private CountDownTimer timer = new CountDownTimer(5 * 1000, 1000) {

        public void onTick(long millisUntilFinished) {

        }

        public void onFinish() {
            stopUsingGPS();
        }
    };

    public LocationService() {
        super(R.id.gps_service_id);
    }


    public void start() {
        if (Utils.isNetworkAvailable(context)) {

            try {


                timer.start();


                locationManager = (LocationManager) context
                        .getSystemService(Context.LOCATION_SERVICE);

                isGPSEnabled = locationManager
                        .isProviderEnabled(LocationManager.GPS_PROVIDER);

                isNetworkEnabled = locationManager
                        .isProviderEnabled(LocationManager.NETWORK_PROVIDER);
                this.canGetLocation = true;
                if (isNetworkEnabled) {
                    locationManager.requestLocationUpdates(
                            LocationManager.NETWORK_PROVIDER,
                            MIN_TIME_BW_UPDATES,
                            MIN_DISTANCE_CHANGE_FOR_UPDATES, this);
                    Log.d("Network", "Network");
                    if (locationManager != null) {
                        Location tempLocation = locationManager
                                .getLastKnownLocation(LocationManager.NETWORK_PROVIDER);
                        if (tempLocation != null
                                && isBetterLocation(tempLocation,
                                        location))
                            location = tempLocation;
                    }
                }
                if (isGPSEnabled) {

                    locationManager.requestSingleUpdate(
                            LocationManager.GPS_PROVIDER, this, null);
                    locationManager.requestLocationUpdates(
                            LocationManager.GPS_PROVIDER, MIN_TIME_BW_UPDATES,
                            MIN_DISTANCE_CHANGE_FOR_UPDATES, this);
                    Log.d("GPS Enabled", "GPS Enabled");
                    if (locationManager != null) {
                        Location tempLocation = locationManager
                                .getLastKnownLocation(LocationManager.GPS_PROVIDER);
                        if (tempLocation != null
                                && isBetterLocation(tempLocation,
                                        location))
                            location = tempLocation;
                    }
                }

            } catch (Exception e) {
                onTaskError(e.getMessage());
                e.printStackTrace();
            }
        } else {
            onOfflineResponse(requestData);
        }
    }

    public void stopUsingGPS() {
        if (locationManager != null) {
            locationManager.removeUpdates(LocationService.this);
        }
    }

    public boolean canGetLocation() {
        locationManager = (LocationManager) context
                .getSystemService(Context.LOCATION_SERVICE);
        isGPSEnabled = locationManager
                .isProviderEnabled(LocationManager.GPS_PROVIDER);

        // getting network status
        isNetworkEnabled = locationManager
                .isProviderEnabled(LocationManager.NETWORK_PROVIDER);
        return isGPSEnabled || isNetworkEnabled;
    }

    @Override
    public void onLocationChanged(Location location) {

        if (location != null
                && isBetterLocation(location, this.location)) {

            this.location = location;

        }
    }

    @Override
    public void onProviderDisabled(String provider) {
    }

    @Override
    public void onProviderEnabled(String provider) {
    }

    @Override
    public void onStatusChanged(String provider, int status, Bundle extras) {
    }

    @Override
    public Object getResponseObject(Object location) {
        return location;
    }

    public static boolean isBetterLocation(Location location,
            Location currentBestLocation) {
        if (currentBestLocation == null) {
            // A new location is always better than no location
            return true;
        }

        // Check whether the new location fix is newer or older
        long timeDelta = location.getTime() - currentBestLocation.getTime();
        boolean isSignificantlyNewer = timeDelta > MIN_TIME_INTERVAL;
        boolean isSignificantlyOlder = timeDelta < -MIN_TIME_INTERVAL;
        boolean isNewer = timeDelta > 0;

        // If it's been more than two minutes since the current location,
        // use the new location
        // because the user has likely moved
        if (isSignificantlyNewer) {
            return true;
            // If the new location is more than two minutes older, it must
            // be worse
        } else if (isSignificantlyOlder) {
            return false;
        }

        // Check whether the new location fix is more or less accurate
        int accuracyDelta = (int) (location.getAccuracy() - currentBestLocation
                .getAccuracy());
        boolean isLessAccurate = accuracyDelta > 0;
        boolean isMoreAccurate = accuracyDelta < 0;
        boolean isSignificantlyLessAccurate = accuracyDelta > 200;

        // Check if the old and new location are from the same provider
        boolean isFromSameProvider = isSameProvider(location.getProvider(),
                currentBestLocation.getProvider());

        // Determine location quality using a combination of timeliness and
        // accuracy
        if (isMoreAccurate) {
            return true;
        } else if (isNewer && !isLessAccurate) {
            return true;
        } else if (isNewer && !isSignificantlyLessAccurate
                && isFromSameProvider) {
            return true;
        }
        return false;
    }

}

In the above class, I am registering a location listener for both GPS and network, so an onLocationChanged call back can be called by either or both of them multiple times and we just compare the new location fix with the one we already have and keep the best one.

I would suggest mine solution that you can find in this GitHub repo. This works also for IE8 and IE9 with a custom arrow that comes from an icon font.

Examples of Custom Cross Browser Drop-down in action: check them with all your browsers to see the cross-browser feature.

Anyway, let's start with the modern browsers and then we will see the solution for the older ones.

Drop-down Arrow for Chrome, Firefox, Opera, Internet Explorer 10+

For these browser, it is easy to set the same background image for the drop-down in order to have the same arrow.

To do so, you have to reset the browser's default style for the select tag and set new background rules (like suggested before).

select {
    /* you should keep these firsts rules in place to maintain cross-browser behaviour */
    -webkit-appearance: none;
    -moz-appearance: none;
    -o-appearance: none;
    appearance: none;
    background-image: url('<custom_arrow_image_url_here>');
    background-position: 98% center;
    background-repeat: no-repeat;
    outline: none;
    ...
}

The appearance rules are set to none to reset browsers default ones, if you want to have the same aspect for each arrow, you should keep them in place.

The background rules in the examples are set with SVG inline images that represent different arrows. They are positioned 98% from left to keep some margin to the right border (you can easily modify the position as you wish).

In order to maintain the correct cross-browser behavior, the only other rule that have to be left in place is the outline. This rule resets the default border that appears (in some browsers) when the element is clicked. All the others rules can be easily modified if needed.

Drop-down Arrow for Internet Explorer 8 (IE8) and Internet Explorer 9 (IE9) using Icon Font

This is the harder part... Or maybe not.

There is no standard rule to hide the default arrows for these browsers (like the select::-ms-expand for IE10+). The solution is to hide the part of the drop-down that contains the default arrow and insert an arrow icon font (or a SVG, if you prefer) similar to the SVG that is used in the other browsers (see the select CSS rule for more details about the inline SVG used).

The very first step is to set a class that can recognize the browser: this is the reason why I have used the conditional IE IFs at the beginning of the code. These IFs are used to attach specific classes to the html tag to recognize the older IE browser.

After that, every select in the HTML have to be wrapped by a div (or whatever tag that can wraps an element). At this wrapper just add the class that contains the icon font.

<div class="selectTagWrapper prefix-icon-arrow-down-fill">
    ...
</div>

In easy words, this wrapper is used to simulate the select tag.

To act like a drop-down, the wrapper must have a border, because we hide the one that comes from the select.

Notice that we cannot use the select border because we have to hide the default arrow lengthening it 25% more than the wrapper. Consequently its right border should not be visible because we hide this 25% more by the overflow: hidden rule applied to the select itself.

The custom arrow icon-font is placed in the pseudo class :before where the rule content contains the reference for the arrow (in this case it is a right parenthesis).

We also place this arrow in an absolute position to center it as much as possible (if you use different icon fonts, remember to adjust them opportunely by changing top and left values and the font size).

.ie8 .prefix-icon-arrow-down-fill:before,
.ie9 .prefix-icon-arrow-down-fill:before {
    content: ")";
    position: absolute;
    top: 43%;
    left: 93%;
    font-size: 6px;
    ...
}

You can easily create and substitute the background arrow or the icon font arrow, with every one that you want simply changing it in the background-image rule or making a new icon font file by yourself.

if you want to just update node, there's a neat updater too

https://github.com/creationix/nvm

to use,

git clone git://github.com/creationix/nvm.git ~/.nvm

source ~/.nvm/nvm.sh

nvm install v0.4.1

I have found dom4j to be the tool for working with XML. Especially compared to Xerces.

var sels = //Here is your array of SELECTs
var json = { };

for(var i = 0, l = sels.length; i < l; i++) {
  json[sels[i].id] = sels[i].value;
}

closures are beautiful! they solve a lot of problems that come with anonymous functions, and make really elegant code possible (at least as long as we talk about php).

javascript programmers use closures all the time, sometimes even without knowing it, because bound variables aren't explicitly defined - that's what "use" is for in php.

there are better real-world examples than the above one. lets say you have to sort an multidimensional array by a sub-value, but the key changes.

<?php
    function generateComparisonFunctionForKey($key) {
        return function ($left, $right) use ($key) {
            if ($left[$key] == $right[$key])
                return 0;
            else
                return ($left[$key] < $right[$key]) ? -1 : 1;
        };
    }

    $myArray = array(
        array('name' => 'Alex', 'age' => 70),
        array('name' => 'Enrico', 'age' => 25)
    );

    $sortByName = generateComparisonFunctionForKey('name');
    $sortByAge  = generateComparisonFunctionForKey('age');

    usort($myArray, $sortByName);

    usort($myArray, $sortByAge);
?>

warning: untested code (i don't have php5.3 installed atm), but it should look like something like that.

there's one downside: a lot of php developers may be a bit helpless if you confront them with closures.

to understand the nice-ty of closures more, i'll give you another example - this time in javascript. one of the problems is the scoping and the browser inherent asynchronity. especially, if it comes to window.setTimeout(); (or -interval). so, you pass a function to setTimeout, but you can't really give any parameters, because providing parameters executes the code!

function getFunctionTextInASecond(value) {
    return function () {
        document.getElementsByName('body')[0].innerHTML = value; // "value" is the bound variable!
    }
}

var textToDisplay = prompt('text to show in a second', 'foo bar');

// this returns a function that sets the bodys innerHTML to the prompted value
var myFunction = getFunctionTextInASecond(textToDisplay);

window.setTimeout(myFunction, 1000);

myFunction returns a function with a kind-of predefined parameter!

to be honest, i like php a lot more since 5.3 and anonymous functions/closures. namespaces may be more important, but they're a lot less sexy.

Can't you just separate them by a semicolon?

Delete from messages where messageid = '1';
Delete from usersmessages where messageid = '1'

OR

Just use INNER JOIN as below

DELETE messages , usersmessages  FROM messages  INNER JOIN usersmessages  
WHERE messages.messageid= usersmessages.messageid and messages.messageid = '1'

For Bootstrap:

<div class="navbar-fixed-bottom row-fluid">
  <div class="navbar-inner">
    <div class="container">
      Text
    </div>
  </div>
</div>

You can push your local branch to a new remote branch like so:

git push origin master:test

(Assuming origin is your remote, master is your local branch name and test is the name of the new remote branch, you wish to create.)

If at the same time you want to set up your local branch to track the newly created remote branch, you can do so with -u (on newer versions of Git) or --set-upstream, so:

git push -u origin master:test

or

git push --set-upstream origin master:test

...will create a new remote branch, named test, in remote repository origin, based on your local master, and setup your local master to track it.

This question is really old, but I came across this page when I was looking for the easiest and quickest way to do this. Using Webpack is much simpler:

install webpack-dev-server

npm i -g webpack-dev-server

start webpack-dev-server with https

webpack-dev-server --https

To avoid any long and unreliable shuffles, I'd do the following...

1. Generate an array that contains the number between 1 and 100, in order.
2. Generate a random number between 1 and 100
3. Look up the number at this index in the array and store in your results
4. Remove the elemnt from the array, making it one shorter
5. Repeat from step 2, but use 99 as the upper limit of the random number
6. Repeat from step 2, but use 98 as the upper limit of the random number
7. Repeat from step 2, but use 97 as the upper limit of the random number
8. Repeat from step 2, but use 96 as the upper limit of the random number
9. Repeat from step 2, but use 95 as the upper limit of the random number
10. Repeat from step 2, but use 94 as the upper limit of the random number
11. Repeat from step 2, but use 93 as the upper limit of the random number

Voila - no repeated numbers.

I may post some actual code later, if anybody is interested.

Edit: It's probably the competitive streak in me but, having seen the post by @Alsciende, I couldn't resist posting the code that I promised.

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<html>
<head>
<title>8 unique random number between 1 and 100</title>
<script type="text/javascript" language="Javascript">
    function pick(n, min, max){
        var values = [], i = max;
        while(i >= min) values.push(i--);
        var results = [];
        var maxIndex = max;
        for(i=1; i <= n; i++){
            maxIndex--;
            var index = Math.floor(maxIndex * Math.random());
            results.push(values[index]);
            values[index] = values[maxIndex];
        }
        return results;
    }
    function go(){
        var running = true;
        do{
            if(!confirm(pick(8, 1, 100).sort(function(a,b){return a - b;}))){
                running = false;
            }
        }while(running)
    }
</script>
</head>

<body>
    <h1>8 unique random number between 1 and 100</h1>
    <p><button onclick="go()">Click me</button> to start generating numbers.</p>
    <p>When the numbers appear, click OK to generate another set, or Cancel to stop.</p>
</body>

It took me a while to locate why the sample application works but mine don't.

The library (Foundation.Framework) that the author refer to is the system library (from OS) where the iphone sdk (I am using 3.0) is not support any more.

Therefore the sample application (from about.com, http://www.appsamuck.com/day1.html) works but ours don't.

Just execute: ? npm rebuild node-sass --force

1. Delete node-sass folder under node_modules
2. npm install

In my case it also couldn't find Python.

Following procedure solved the issue (Windows):

npm rebuild node-sass --force
-- cannot find python.exe, if you have Python installed, add it to your path:
set PYTHON=C:\Python27\Python.exe
-- else: download python "Windows x86-64-MSI" installer from https://www.python.org/downloads/release/python-2714/
-- install python
-- at installation start check: add env variable to path
-- after successfull installation:
npm rebuild node-sass --force
-- finished successfully

I suffered a similar issue: in my modal window, I have two buttons, "Cancel" and "OK". Originally, both buttons would close the modal window by invoking $('#myModal').modal('hide') (with "OK" previously executing some code) and the scenario would be the following:

1. Open the modal window
2. Do some operations, then click on "OK" do validate them and close the modal
3. Open the modal again and dismiss by clicking on "Cancel"
4. Re-open the modal, click again on "Cancel" ==> the backdrop is no longer accessible!

well, my fellow next desk saved my day: instead of invoking $('#myModal').modal('hide'), give your buttons the attribute data-dismiss="modal" and add a "click" event to your "Submit" button. In my problem, the HTML (well, TWIG) code for the button is:

<button id="modal-btn-ok" class="btn" data-dismiss="modal">OK</button>
<button id="modal-btn-cancel" class="btn" data-dismiss="modal">Cancel</button>

and in my JavaScript code, I have:

$("#modal-btn-ok").one("click", null, null, function(){
    // My stuff to be done
});

while no "click" event is attributed to the "Cancel" button. The modal now closes properly and lets me play again with the "normal" page. It actually seems that the data-dismiss="modal" should be the only way to indicate that a button (or whatever DOM element) should close a Bootstrap modal. The .modal('hide') method seems to behave in a not quite controllable way.

Hope this helps!

Assuming that your current primary key constraint is called pk_history, you can replace the following lines:

ALTER TABLE history ADD PRIMARY KEY (id)

ALTER TABLE history
DROP CONSTRAINT userId
DROP CONSTRAINT name

with these:

ALTER TABLE history DROP CONSTRAINT pk_history

ALTER TABLE history ADD CONSTRAINT pk_history PRIMARY KEY (id)

If you don't know what the name of the PK is, you can find it with the following query:

SELECT * 
  FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS 
 WHERE TABLE_NAME = 'history'

In my opinion this is the simplest solution

$orderby = 'name';
                $order = 'asc';
                $hide_empty = false ;
                $cat_args = array(
                    'orderby'    => $orderby,
                    'order'      => $order,
                    'hide_empty' => $hide_empty,
                );

                $product_categories = get_terms( 'product_cat', $cat_args );

                if( !empty($product_categories) ){
                    echo '

                <ul>';
                    foreach ($product_categories as $key => $category) {
                        echo '

                <li>';
                        echo '<a href="'.get_term_link($category).'" >';
                        echo $category->name;
                        echo '</a>';
                        echo '</li>';
                    }
                    echo '</ul>


                ';
                }

For what it's worth, this is how I managed to achieve such behavior for a general element which can be inside a DIV with scrolling (without knowing the container)

It creates a fake input of the height of the target element, and then puts a focus to it, and the browser will take care about the rest no matter how deep within the scrollable hierarchy you are. Works like a charm.

var $scrollTo = $('#someId'),
inputElem = $('<input type="text"></input>');

$scrollTo.prepend(inputElem);
inputElem.css({
  position: 'absolute',
  width: '1px',
  height: $scrollTo.height()
});
inputElem.focus();
inputElem.remove();

There are two ways to write case statements, you seem to be using a combination of the two

case a.updatedDate
    when 1760 then 'Entered on' + a.updatedDate
    when 1710 then 'Viewed on' + a.updatedDate
    else 'Last Updated on' + a.updateDate
end

or

case 
    when a.updatedDate = 1760 then 'Entered on' + a.updatedDate
    when a.updatedDate = 1710 then 'Viewed on' + a.updatedDate
    else 'Last Updated on' + a.updateDate
end

are equivalent. They may not work because you may need to convert date types to varchars to append them to other varchars.

If the jQuery plugin call is next to the </body>, and your script is loaded before that, you should make your code run after window.onload event, like this:

window.onload = function() {
  //YOUR JQUERY CODE
}

`

so, your code will run only after the window load, when all assets have been loaded. In that point, the jQuery ($) will be defined.

If you use that:

$(document).ready(function () {
  //YOUR JQUERY CODE
});

`

the $ isn't yet defined at this time, because it is called before the jQuery is loaded, and your script will fail on that first line on console.

Saving Array in SharedPreferences:

public static boolean saveArray()
{
    SharedPreferences sp = PreferenceManager.getDefaultSharedPreferences(this);
    SharedPreferences.Editor mEdit1 = sp.edit();
    /* sKey is an array */
    mEdit1.putInt("Status_size", sKey.size());  

    for(int i=0;i<sKey.size();i++)  
    {
        mEdit1.remove("Status_" + i);
        mEdit1.putString("Status_" + i, sKey.get(i));  
    }

    return mEdit1.commit();     
}

Loading Array Data from SharedPreferences

public static void loadArray(Context mContext)
{  
    SharedPreferences mSharedPreference1 =   PreferenceManager.getDefaultSharedPreferences(mContext);
    sKey.clear();
    int size = mSharedPreference1.getInt("Status_size", 0);  

    for(int i=0;i<size;i++) 
    {
     sKey.add(mSharedPreference1.getString("Status_" + i, null));
    }

}

If you've deleted your root user by mistake you can do one thing:

1. Stop MySQL service
2. Run mysqld_safe --skip-grant-tables &
3. Type mysql -u root -p and press enter.
4. Enter your password
5. At the mysql command line enter: use mysql;

Then execute this query:

insert into `user` (`Host`, `User`, `Password`, `Select_priv`, `Insert_priv`, `Update_priv`, `Delete_priv`, `Create_priv`, `Drop_priv`, `Reload_priv`, `Shutdown_priv`, `Process_priv`, `File_priv`, `Grant_priv`, `References_priv`, `Index_priv`, `Alter_priv`, `Show_db_priv`, `Super_priv`, `Create_tmp_table_priv`, `Lock_tables_priv`, `Execute_priv`, `Repl_slave_priv`, `Repl_client_priv`, `Create_view_priv`, `Show_view_priv`, `Create_routine_priv`, `Alter_routine_priv`, `Create_user_priv`, `ssl_type`, `ssl_cipher`, `x509_issuer`, `x509_subject`, `max_questions`, `max_updates`, `max_connections`, `max_user_connections`) 
values('localhost','root','','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','','','','','0','0','0','0');

then restart the mysqld

EDIT: October 6, 2018

In case anyone else needs this answer, I tried it today using innodb_version 5.6.36-82.0 and 10.1.24-MariaDB and it works if you REMOVE THE BACKTICKS (no single quotes either, just remove them):

insert into user (Host, User, Password, Select_priv, Insert_priv, Update_priv, Delete_priv, Create_priv, Drop_priv, Reload_priv, Shutdown_priv, Process_priv, File_priv, Grant_priv, References_priv, Index_priv, Alter_priv, Show_db_priv, Super_priv, Create_tmp_table_priv, Lock_tables_priv, Execute_priv, Repl_slave_priv, Repl_client_priv, Create_view_priv, Show_view_priv, Create_routine_priv, Alter_routine_priv, Create_user_priv, ssl_type, ssl_cipher, x509_issuer, x509_subject, max_questions, max_updates, max_connections, max_user_connections) 
values('localhost','root','','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','Y','','','','','0','0','0','0');

Once you do git pull, you will get list of files that are not matching. If the number of files is not very large then you can checkout those files, this action will overwrite those files.

git checkout -- <filename>

I usually do it if for quick check I modify local files on server (no recommended and probabaly reason behind you getting this issue :D ), I checkout the changed files after finding solution.

In UWP:

await Launcher.LaunchUriAsync(new Uri("http://google.com"));

values = set(map(lambda x:x[1], mylist))
newlist = [[y[0] for y in mylist if y[1]==x] for x in values]

var oldString = "stackoverflow";
var str=oldString.replace(/stackover/g,"NO");
$scope.newString= str;

It works for me. Use an intermediate variable.

Wildcard works for me also, but I'd like to give a side note for those using directory variables. Always use slash for folder tree (not backslash), otherwise it will fail:

BASEDIR = ../..
SRCDIR = $(BASEDIR)/src
INSTALLDIR = $(BASEDIR)/lib

MODULES = $(wildcard $(SRCDIR)/*.cpp)
OBJS = $(wildcard *.o)

To format the date using the local date format use:

<%#((DateTime)Eval("ExpDate")).ToString("d")%>

How to Format an Eval Statement to Display a Date using Date Locale

Our js-programmer asked me to return the exact JSON format data instead of a json-encoded string to her.

Below is the solution.(This will return an object that can be used/viewed straightly in the browser)

import json
from xxx.models import alert
from django.core import serializers

def test(request):
    alert_list = alert.objects.all()

    tmpJson = serializers.serialize("json",alert_list)
    tmpObj = json.loads(tmpJson)

    return HttpResponse(json.dumps(tmpObj))

You don't have to use Calendar. You can just play with timestamps :

Date d = initDate();//intialize your date to any date 
Date dateBefore = new Date(d.getTime() - n * 24 * 3600 * 1000 l ); //Subtract n days   

UPDATE DO NOT FORGET TO ADD "l" for long by the end of 1000.

Please consider the below WARNING:

Adding 1000*60*60*24 milliseconds to a java date will once in a great while add zero days or two days to the original date in the circumstances of leap seconds, daylight savings time and the like. If you need to be 100% certain only one day is added, this solution is not the one to use.

I won't repeat the usual stuff about Using or freeing un-managed resources, that has all been covered. But I would like to point out what seems a common misconception.
Given the following code

Public Class LargeStuff
  Implements IDisposable
  Private _Large as string()

  'Some strange code that means _Large now contains several million long strings.

  Public Sub Dispose() Implements IDisposable.Dispose
    _Large=Nothing
  End Sub

I realise that the Disposable implementation does not follow current guidelines, but hopefully you all get the idea.
Now, when Dispose is called, how much memory gets freed?

Answer: None.
Calling Dispose can release unmanaged resources, it CANNOT reclaim managed memory, only the GC can do that. Thats not to say that the above isn't a good idea, following the above pattern is still a good idea in fact. Once Dispose has been run, there is nothing stopping the GC re-claiming the memory that was being used by _Large, even though the instance of LargeStuff may still be in scope. The strings in _Large may also be in gen 0 but the instance of LargeStuff might be gen 2, so again, memory would be re-claimed sooner.
There is no point in adding a finaliser to call the Dispose method shown above though. That will just DELAY the re-claiming of memory to allow the finaliser to run.

Just use CSS transitions instead of animations.

A {
    color: #999;
    transition: color 1s ease-in-out;
}

A:hover {
    color: #000;
}

Live demo

Dirkgently gives an excellent description of integer division in C99, but you should also know that in C89 integer division with a negative operand has an implementation-defined direction.

From the ANSI C draft (3.3.5):

If either operand is negative, whether the result of the / operator is the largest integer less than the algebraic quotient or the smallest integer greater than the algebraic quotient is implementation-defined, as is the sign of the result of the % operator. If the quotient a/b is representable, the expression (a/b)*b + a%b shall equal a.

So watch out with negative numbers when you are stuck with a C89 compiler.

It's a fun fact that C99 chose truncation towards zero because that was how FORTRAN did it. See this message on comp.std.c.

b = a[a>threshold] this should do

I tested as follows:

import numpy as np, datetime
# array of zeros and ones interleaved
lrg = np.arange(2).reshape((2,-1)).repeat(1000000,-1).flatten()

t0 = datetime.datetime.now()
flt = lrg[lrg==0]
print datetime.datetime.now() - t0

t0 = datetime.datetime.now()
flt = np.array(filter(lambda x:x==0, lrg))
print datetime.datetime.now() - t0

I got

$ python test.py
0:00:00.028000
0:00:02.461000

http://docs.scipy.org/doc/numpy/user/basics.indexing.html#boolean-or-mask-index-arrays

If you prefer to see the size of all deleted file

as well as the associated SHA

git log --all --stat --diff-filter=D --oneline

add a -p to see the contents too

git log --all --stat --diff-filter=D -p

To narrow down to any file simply pipe to grep and search for file name

git log --all --stat --diff-filter=D --oneline | grep someFileName

You might also like this one if you know where the file is

git log --all --full-history -- someFileName

Note that TRUNCATE won't work if you have any referential integrity set.

In that case, this will work:

EXEC sp_MSForEachTable 'DISABLE TRIGGER ALL ON ?'
GO
EXEC sp_MSForEachTable 'ALTER TABLE ? NOCHECK CONSTRAINT ALL'
GO
EXEC sp_MSForEachTable 'DELETE FROM ?'
GO
EXEC sp_MSForEachTable 'ALTER TABLE ? CHECK CONSTRAINT ALL'
GO
EXEC sp_MSForEachTable 'ENABLE TRIGGER ALL ON ?'
GO

Edit: To be clear, the ? in the statements is a ?. It's replaced with the table name by the sp_MSForEachTable procedure.

To translate your *nix style command script to windows/command batch style it would go like this:

SET PROJ_HOME=%USERPROFILE%/proj/111
SET PROJECT_BASEDIR=%PROJ_HOME%/exercises/ex1
mkdir "%PROJ_HOME%"

mkdir on windows doens't have a -p parameter : from the MKDIR /? help:

MKDIR creates any intermediate directories in the path, if needed.

which basically is what mkdir -p (or --parents for purists) on *nix does, as taken from the man guide

This is how I have achieved it using purely CSS and HTML (no JavaScript/images etc.).

http://jsfiddle.net/tuPrn/

It gracefully degrades in most browsers (I do need to add in a fix for lack of last-of-type in < IE9).

A better solution is to use the array_filter function:

$display_related_tags =
    array_filter($display_related_tags, function($e) use($found_tag){
        return $e != $found_tag['name'];
    });

As the php documentation reads:

As foreach relies on the internal array pointer in PHP 5, changing it within the loop may lead to unexpected behavior.

In PHP 7, foreach does not use the internal array pointer.

use auto and min or max width like this:

td {
max-width:50px;
width:auto;
min-width:10px;
}

Python compiles the .py and saves files as .pyc so it can reference them in subsequent invocations.

There's no harm in deleting them, but they will save compilation time if you're doing lots of processing.

there is a ngcontentloaded event, I think you can use it

.directive('directiveExample', function(){
   return {
       restrict: 'A',
       link: function(scope, elem, attrs){

                $$window = $ $window


                init = function(){
                    contentHeight = elem.outerHeight()
                    //do the things
                }

                $$window.on('ngcontentloaded',init)

       }
   }
});

You can use this implementation that ExecutorService provides

invokeAll(Collection<? extends Callable<T>> tasks,long timeout, TimeUnit unit)
as

executor.invokeAll(Arrays.asList(task), 2 , TimeUnit.SECONDS);

However, in my case, I could not as Arrays.asList took extra 20ms.

In my case convertor must return string value. I don't why, but it works.

*.xaml (common style file, which is included in another xaml files)

<Style TargetType="DataGridCell">
        <Setter Property="Background" Value="{Binding RelativeSource={RelativeSource Self}, Converter={StaticResource ValueToBrushConverter}}" />
</Style>

*.cs

public object Convert(object value, Type targetType, object parameter, CultureInfo culture)
{
    Color color = VSColorTheme.GetThemedColor(EnvironmentColors.ToolWindowBackgroundColorKey);
    return "#" + color.Name;
}

After this question was asked, Facebook launched HipHop for PHP which is probably the best-tested PHP compiler to date (seeing as it ran one of the world’s 10 biggest websites). However, Facebook discontinued it in favour of HHVM, which is a virtual machine, not a compiler.

Beyond that, googling PHP compiler turns up a number of 3rd party solutions.

PeachPie

• PeachPie GitHub
• compiles PHP to .NET and .NET Core
• can be compiled into self-contained binary file
• runs on Mac, Linux, Windows, Windows Core, ARM, ...

Phalanger

• GitHub (download), Wikipedia
• compiles to .NET (CIL) looks discontinued from July 2017 and doesn't seem to support PHP 7.

phc

• compiles to native binaries
• not very active now (February 2014) – last version in 2011, last change in summer 2013

Roadsend PHP Compiler

• GitHub, GitHub of a rewrite
• free, open source implementation of PHP with compiler
• compiles to native binaries (Windows, Linux)
• discontinued since 2010 till contributors found – website down, stays on GitHub where last change is from early 2012

bcompiler

• PECL extension of PHP
• experimental
• compiles to PHP bytecode, but can wrap it in Windows binary that loads PHP interpreter (see bcompiler_write_exe_footer() manual)
• looks discontinued now (February 2014) – last change in 2011

Project Zero

• Wikipedia, IBM
• incubator of changes for WebSphere sMash
• supported by IBM
• compiles to Java bytecode
• looks discontinued now (February 2014) – website down, looks like big hype in 2008 and 2009

Bambalam

• compiles to stand-alone Windows binaries
• the binaries contain bytecode and a launcher
• looks discontinued now (February 2014) – last change in 2006

BinaryPHP

• compiles to C++
• looks discontinued now (February 2014) – last change in 2003

Follow the below

ng-click="anyFunction()"

anyFunction() {
   // call another function here
   anotherFunction();
}

try using return 0;

if it keeps failing change your solution platform to 64x instead of 86x and go to configuration manager(that's were you change the 86x to 64x) and in platform set it to 64 bits

that works for me, hope it work to you

Using standard JSF API, add the client ID to PartialViewContext#getRenderIds().

FacesContext.getCurrentInstance().getPartialViewContext().getRenderIds().add("foo:bar");

Using PrimeFaces specific API, use PrimeFaces.Ajax#update().

PrimeFaces.current().ajax().update("foo:bar");

Or if you're not on PrimeFaces 6.2+ yet, use RequestContext#update().

RequestContext.getCurrentInstance().update("foo:bar");

If you happen to use JSF utility library OmniFaces, use Ajax#update().

Ajax.update("foo:bar");

Regardless of the way, note that those client IDs should represent absolute client IDs which are not prefixed with the NamingContainer separator character like as you would do from the view side on.

can you try if.else

> col2=ifelse(df1$col=="true",1,0)
> df1
$col
[1] "true"  "false"

> cbind(df1$col)
     [,1]   
[1,] "true" 
[2,] "false"
> cbind(df1$col,col2)
             col2
[1,] "true"  "1" 
[2,] "false" "0" 

To navigate to the parent component regardless of the number of parameters in the current route or the parent route: Angular 6 update 1/21/19

   let routerLink = this._aRoute.parent.snapshot.pathFromRoot
        .map((s) => s.url)
        .reduce((a, e) => {
            //Do NOT add last path!
            if (a.length + e.length !== this._aRoute.parent.snapshot.pathFromRoot.length) {
                return a.concat(e);
            }
            return a;
        })
        .map((s) => s.path);
    this._router.navigate(routerLink);

This has the added bonus of being an absolute route you can use with the singleton Router.

(Angular 4+ for sure, probably Angular 2 too.)

It's not an insert if the record already exists in t1 (the user_id matches) unless you are happy to create duplicate user_id's.

You might want an update?

UPDATE t1
   SET <t1.col_list> = (SELECT <t2.col_list>
                          FROM t2
                         WHERE t2.user_id = t1.user_id)
 WHERE EXISTS
      (SELECT 1
         FROM t2
        WHERE t1.user_id = t2.user_id);

Hope it helps...

I like ThomasA's answer, but wanted a more realistic context with the wave being used to separate two divs. So I created a more complete demo where the separator SVG gets positioned perfectly between the two divs.

Now I thought it would be cool to take it further. What if we could do this all in CSS without the need for the inline SVG? The point being to avoid extra markup. Here's how I did it:

Two simple <div>:

/** CSS using pseudo-elements: **/_x000D_
_x000D_
#A {_x000D_
  background: #0074D9;_x000D_
}_x000D_
_x000D_
#B {_x000D_
  background: #7FDBFF;_x000D_
}_x000D_
_x000D_
#A::after {_x000D_
  content: "";_x000D_
  position: relative;_x000D_
  left: -3rem;_x000D_
  /* padding * -1 */_x000D_
  top: calc( 3rem - 4rem / 2);_x000D_
  /* padding - height/2 */_x000D_
  float: left;_x000D_
  display: block;_x000D_
  height: 4rem;_x000D_
  width: 100vw;_x000D_
  background: hsla(0, 0%, 100%, 0.5);_x000D_
  background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' viewBox='0 70 500 60' preserveAspectRatio='none'%3E%3Crect x='0' y='0' width='500' height='500' style='stroke: none; fill: %237FDBFF;' /%3E%3Cpath d='M0,100 C150,200 350,0 500,100 L500,00 L0,0 Z' style='stroke: none; fill: %230074D9;'%3E%3C/path%3E%3C/svg%3E");_x000D_
  background-size: 100% 100%;_x000D_
}_x000D_
_x000D_
_x000D_
/** Cosmetics **/_x000D_
_x000D_
* {_x000D_
  margin: 0;_x000D_
}_x000D_
_x000D_
#A,_x000D_
#B {_x000D_
  padding: 3rem;_x000D_
}_x000D_
_x000D_
div {_x000D_
  font-family: monospace;_x000D_
  font-size: 1.2rem;_x000D_
  line-height: 1.2;_x000D_
}_x000D_
_x000D_
#A {_x000D_
  color: white;_x000D_
}

<div id="A">Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vivamus nec quam tincidunt, iaculis mi non, hendrerit felis. Nulla pretium lectus et arcu tempus, quis luctus ex imperdiet. In facilisis nulla suscipit ornare finibus. …_x000D_
</div>_x000D_
_x000D_
<div id="B" class="wavy">… In iaculis fermentum lacus vel porttitor. Vestibulum congue elementum neque eget feugiat. Donec suscipit diam ligula, aliquam consequat tellus sagittis porttitor. Sed sodales leo nisl, ut consequat est ornare eleifend. Cras et semper mi, in porta nunc.</div>

Demo Wavy divider (with CSS pseudo-elements to avoid extra markup)

It was a bit trickier to position than with an inline SVG but works just as well. (Could use CSS custom properties or pre-processor variables to keep the height and padding easy to read.)

To edit the colors, you need to edit the URL-encoded SVG itself.

Pay attention (like in the first demo) to a change in the viewBox to get rid of unwanted spaces in the SVG. (Another option would be to draw a different SVG.)

Another thing to pay attention to here is the background-size set to 100% 100% to get it to stretch in both directions.

You can use JavaScript like... Just give the proper path of your json file...

<!doctype html>
<html>
    <head>
        <script type="text/javascript" src="abc.json"></script>
        <script type="text/javascript" >
            function load() {
                var mydata = JSON.parse(data);
                alert(mydata.length);

                var div = document.getElementById('data');

                for(var i = 0;i < mydata.length; i++)
                {
                    div.innerHTML = div.innerHTML + "<p class='inner' id="+i+">"+ mydata[i].name +"</p>" + "<br>";
                }
            }
        </script>
    </head>
    <body onload="load()">
        <div id="data">

        </div>
    </body>
</html>

Simply getting the data and appending it to a div... Initially printing the length in alert.

Here is my Json file: abc.json

data = '[{"name" : "Riyaz"},{"name" : "Javed"},{"name" : "Arun"},{"name" : "Sunil"},{"name" : "Rahul"},{"name" : "Anita"}]';

You may want to consider a library to handle the deep link to your app:

https://github.com/airbnb/DeepLinkDispatch

You can add the intent filter on an annotated Activity like people suggested above. It will handle the routing and parsing of parameters for all of your deep links. For example, your MainActivity might have something like this:

@DeepLink("somePath/{useful_info_for_anton_app}")
public class MainActivity extends Activity {
   ...
}

It can also handle query parameters as well.

× stands for × in html. Use &times to get &times

A solution with no libraries, dynamic length returned, unsigned integer interpretation (not two's complement)

    public static byte[] numToBytes(int num){
    if(num == 0){
        return new byte[]{};
    }else if(num < 256){
        return new byte[]{ (byte)(num) };
    }else if(num < 65536){
        return new byte[]{ (byte)(num >>> 8),(byte)num };
    }else if(num < 16777216){
        return new byte[]{ (byte)(num >>> 16),(byte)(num >>> 8),(byte)num };
    }else{ // up to 2,147,483,647
        return new byte[]{ (byte)(num >>> 24),(byte)(num >>> 16),(byte)(num >>> 8),(byte)num };
    }
}

Sometimes the errors exists in Android-manifest because of that there is cross like image over run/debug configuration hence try to look over if Android-manifest has any errors in just case.

request.args is a MultiDict with the parsed contents of the query string. From the documentation of get method:

get(key, default=None, type=None)

Return the default value if the requested data doesn’t exist. If type is provided and is a callable it should convert the value, return it or raise a ValueError if that is not possible.

OP stated he didn't want to modify the code for the buttons. This is the least-intrusive answer I could come up with using the other answers as a guide. It doesn't require additional hidden fields, allows you to leave the button code intact (sometimes you don't have access to what generates it), and gives you the info you were looking for from anywhere in your code...which button was used to submit the form. I haven't evaluated what happens if the user uses the Enter key to submit the form, rather than clicking.

<script language="javascript" type="text/javascript">

    var initiator = '';
    $(document).ready(function() {
        $(":submit").click(function() { initiator = this.name });
    });

</script>

Then you have access to the 'initiator' variable anywhere that might need to do the checking. Hope this helps.

~Spanky

For me, the next has beeen working in an .htaccess file.

AddType font/ttf .ttf
AddType font/eot .eot
AddType font/otf .otf
AddType font/woff .woff
AddType font/woff2 .woff2   

One thing the solution in the accepted answer doesn't do is clear the cache for parameterized selectors. If you have a selector like this:

export const selectCounter1 = (state: State) => state.counter1;
export const selectCounter2 = (state: State) => state.counter2;
export const selectTotal = createSelector(
  selectCounter1,
  selectCounter2,
  (counter1, counter2) => counter1 + counter2
);

Then you would have to release them on logout like this:

selectTotal.release();

Otherwise the memoized value for the last call of the selector and the values of the last parameters will still be in memory.

Code samples are from the ngrx docs.

While it's possible that this is due to a jar file missing from your classpath, it may not be.

It is important to keep two or three different exceptions strait in our head in this case:

1. java.lang.ClassNotFoundException This exception indicates that the class was not found on the classpath. This indicates that we were trying to load the class definition, and the class did not exist on the classpath.

2. java.lang.NoClassDefFoundError This exception indicates that the JVM looked in its internal class definition data structure for the definition of a class and did not find it. This is different than saying that it could not be loaded from the classpath. Usually this indicates that we previously attempted to load a class from the classpath, but it failed for some reason - now we're trying again, but we're not even going to try to load it, because we failed loading it earlier. The earlier failure could be a ClassNotFoundException or an ExceptionInInitializerError (indicating a failure in the static initialization block) or any number of other problems. The point is, a NoClassDefFoundError is not necessarily a classpath problem.

I would look at the source for javax.mail.Authenticator, and see what it is doing in it's static initializer. (Look at static variable initialization and the static block, if there is one.) If you aren't getting a ClassNotFoundException prior to the NoClassDefFoundError, you're almost guaranteed that it's a static initialization problem.

I have seen similar errors quite frequently when the hosts file incorrectly defines the localhost address, and the static initialization block relies on InetAddress.getLocalHost(). 127.0.0.1 should point to 'localhost' (and probably also localhost.localdomain). It should NOT point to the actual host name of the machine (although for some reason, many older RedHat Linux installers liked to set it incorrectly).

In pgAdmin you can also use

SET search_path TO your_db_name;

You can use either jQuery Autocomplete or ASP.NET AJAX Toolkit Autocomplete

You can try and do this:

myLabel.setText("<html>" + myString.replaceAll("<","&lt;").replaceAll(">", "&gt;").replaceAll("\n", "<br/>") + "</html>")

The advantages of doing this are:

• It replaces all newlines with <br/>, without fail.
• It automatically replaces eventual < and > with < and > respectively, preventing some render havoc.

What it does is:

• "<html>" + adds an opening html tag at the beginning
• .replaceAll("<", "&lt;").replaceAll(">", "&gt;") escapes < and > for convenience
• .replaceAll("\n", "<br/>") replaces all newlines by br (HTML line break) tags for what you wanted
• ... and + "</html>" closes our html tag at the end.

P.S.: I'm very sorry to wake up such an old post, but whatever, you have a reliable snippet for your Java!

I know this is an old question, but since php7.0 you can use the null coalescing operator (another resource).

It similar to the ternary operator, but will behave like isset on the lefthand operand instead of just using its boolean value.

$slide = $_GET["id"] ?? 'fallback';

So if $_GET["id"] is set, it returns the value. If not, it returns the fallback. I found this very helpful for $_POST, $_GET, or any passed parameters, etc

$slide = $_GET["id"] ?? '';

if (trim($slide) == 'link1') ...

I just experienced the same problem using the virtual environment. For me installing the package using python from the venv worked:
.\venv\environment\Scripts\python.exe -m pip install flask-sqlalchemy

I recommend EasyShell, which features 'open' (console), 'run', 'explore', and 'copy path'.

With Object.prototype approach, JSON.parse(JSON.stringify(rows)) returns object, extract values with Object.values()

const result = Object.values(JSON.parse(JSON.stringify(rows)));

Usage:

result.forEach((v) => console.log(v));

You can just create an Image object and put the base64 as its src, including the data:image... part like this:

var image = new Image();
image.src = 'data:image/png;base64,iVBORw0K...';
document.body.appendChild(image);

It's what they call "Data URIs" and here's the compatibility table for inner peace.

body has default margins: http://www.w3.org/TR/CSS2/sample.html

body { margin:0; } /* Remove body margins */

Or you could use this useful Global reset

* { margin:0; padding:0; box-sizing:border-box; }

If you want something less * global than:

html, body, body div, span, object, iframe, h1, h2, h3, h4, h5, h6, p, blockquote, pre, abbr, address, cite, code, del, dfn, em, img, ins, kbd, q, samp, small, strong, sub, sup, var, b, i, dl, dt, dd, ol, ul, li, fieldset, form, label, legend, table, caption, tbody, tfoot, thead, tr, th, td, article, aside, figure, footer, header, hgroup, menu, nav, section, time, mark, audio, video {
    margin: 0;
    padding: 0;
    border: 0;
    outline: 0;
    font-size: 100%;
    vertical-align: baseline;
    background: transparent;
}

some other CSS Reset:

http://yui.yahooapis.com/3.5.0/build/cssreset/cssreset-min.css
http://meyerweb.com/eric/tools/css/reset/
https://github.com/necolas/normalize.css/
http://html5doctor.com/html-5-reset-stylesheet/
…

In case anybody is looking for methods to convert from/to C# and SQL Server formats, here goes a simple implementation:

private readonly string[] SqlServerTypes = { "bigint", "binary", "bit",  "char", "date",     "datetime", "datetime2", "datetimeoffset", "decimal", "filestream", "float",  "geography",                              "geometry",                              "hierarchyid",                              "image",  "int", "money",   "nchar",  "ntext",  "numeric", "nvarchar", "real",   "rowversion", "smalldatetime", "smallint", "smallmoney", "sql_variant", "text",   "time",     "timestamp", "tinyint", "uniqueidentifier", "varbinary", "varchar", "xml" };
private readonly string[] CSharpTypes    = { "long",   "byte[]", "bool", "char", "DateTime", "DateTime", "DateTime",  "DateTimeOffset", "decimal", "byte[]",     "double", "Microsoft.SqlServer.Types.SqlGeography", "Microsoft.SqlServer.Types.SqlGeometry", "Microsoft.SqlServer.Types.SqlHierarchyId", "byte[]", "int", "decimal", "string", "string", "decimal", "string",   "Single", "byte[]",     "DateTime",      "short",    "decimal",    "object",      "string", "TimeSpan", "byte[]",    "byte",    "Guid",             "byte[]",    "string",  "string" };

public string ConvertSqlServerFormatToCSharp(string typeName)
{
    var index = Array.IndexOf(SqlServerTypes, typeName);

    return index > -1
        ? CSharpTypes[index]
        : "object";
}

public string ConvertCSharpFormatToSqlServer(string typeName)
{
    var index = Array.IndexOf(CSharpTypes, typeName);

    return index > -1
        ? SqlServerTypes[index]
        : null;
}

Edit: fixed typo

Try this code. By using the parent>child selector "#productList li" it should find all li elements. Then, you can iterate through the result object using the each() method which will only alter li elements that have been found.

listItems = $("#productList li").each(function(){

        var product = $(this);
        var productid = product.children(".productId").val();
        var productPrice = product.find(".productPrice").val();
        var productMSRP = product.find(".productMSRP").val();

        totalItemsHidden.val(parseInt(totalItemsHidden.val(), 10) + 1);
        subtotalHidden.val(parseFloat(subtotalHidden.val()) + parseFloat(productMSRP));
        savingsHidden.val(parseFloat(savingsHidden.val()) + parseFloat(productMSRP - productPrice));
        totalHidden.val(parseFloat(totalHidden.val()) + parseFloat(productPrice));

    });

Here's another simple way using Runnable interface in Thread Constructor

public class Demo {
    public static void main(String[] args) {
        Thread t1 = new Thread(new Runnable() {

            @Override
            public void run() {
                for(int i = 0; i < 5; i++){
                    try {
                        Thread.sleep(3000);
                    } catch (InterruptedException e) {
                        // TODO Auto-generated catch block
                        e.printStackTrace();
                    }
                    System.out.println("Thread T1 : "+i);
                }
            }
        });

        Thread t2 = new Thread(new Runnable() {

            @Override
            public void run() {
                for(int i = 0; i < 5; i++) {
                    try {
                        Thread.sleep(3000);
                    } catch (InterruptedException e) {
                        // TODO Auto-generated catch block
                        e.printStackTrace();
                    }
                    System.out.println("Thread T2 : "+i);
                }
            }
        });

        Thread t3 = new Thread(new Runnable() {

            @Override
            public void run() {
                for(int i = 0; i < 5; i++){
                    try {
                        Thread.sleep(3000);
                    } catch (InterruptedException e) {
                        // TODO Auto-generated catch block
                        e.printStackTrace();
                    }
                    System.out.println("Thread T3 : "+i);
                }
            }
        });

        t1.start();
        t2.start();
        t3.start();
    }
}

NO, it does NOT work in Access 2013, only 2007/2010. There is no way to really convert an MDB to ACCDB in Access 2013.

When you have changes on your working copy, from command line do:

git stash 

This will stash your changes and clear your status report

git pull

This will pull changes from upstream branch. Make sure it says fast-forward in the report. If it doesn't, you are probably doing an unintended merge

git stash pop

This will apply stashed changes back to working copy and remove the changes from stash unless you have conflicts. In the case of conflict, they will stay in stash so you can start over if needed.

if you need to see what is in your stash

git stash list

Now I need to connect that application from my local computer, but I don't know the JMX port number of the remote computer. Where can I find it? Or, must I restart that application with some VM parameters to specify the port number?

By default JMX does not publish on a port unless you specify the arguments from this page: How to activate JMX...

-Dcom.sun.management.jmxremote # no longer required for JDK6
-Dcom.sun.management.jmxremote.port=9010
-Dcom.sun.management.jmxremote.local.only=false # careful with security implications
-Dcom.sun.management.jmxremote.authenticate=false # careful with security implications

If you are running you should be able to access any of those system properties to see if they have been set:

if (System.getProperty("com.sun.management.jmxremote") == null) {
    System.out.println("JMX remote is disabled");
} else [
    String portString = System.getProperty("com.sun.management.jmxremote.port");
    if (portString != null) {
        System.out.println("JMX running on port "
            + Integer.parseInt(portString));
    }
}

Depending on how the server is connected, you might also have to specify the following parameter. As part of the initial JMX connection, jconsole connects up to the RMI port to determine which port the JMX server is running on. When you initially start up a JMX enabled application, it looks its own hostname to determine what address to return in that initial RMI transaction. If your hostname is not in /etc/hosts or if it is set to an incorrect interface address then you can override it with the following:

-Djava.rmi.server.hostname=<IP address>

As an aside, my SimpleJMX package allows you to define both the JMX server and the RMI port or set them both to the same port. The above port defined with com.sun.management.jmxremote.port is actually the RMI port. This tells the client what port the JMX server is running on.

I received the same error and in mycase it was the password. My password has special characters for and if you supply the password without escaping the special characters the error will continue to show. E.g $mail->Password = " por$ch3"; is valid but will not work using the code above . The solution should be as follows: $mail->Password = "por\$ch3"; Note the Backslash I placed before the dollar character within my password. That should work if you have a password using special characters

Right click on Computer and choose "Manage" (or go to Control Panel > Administrative Tools > Computer Management) and under "Local Users and Groups" you can add a new user. Then, give that user permission to read the directory where the site is hosted.

Note: After creating the user, be sure to edit the user and remove all roles.

I tried to update a field with

$table->update(['field' => 'val']);

But it wasn't working, i had to modify my table Model to authorize this field to be edited : add 'field' in the array "protected $fillable"

Hope it will help someone :)

For Tomcat v8.5.4 and above, the file <tomcat>/webapps/manager/META-INF/context.xml has been adjusted:

<Context antiResourceLocking="false" privileged="true" >
    <Valve className="org.apache.catalina.valves.RemoteAddrValve"
         allow="127\.\d+\.\d+\.\d+|::1|0:0:0:0:0:0:0:1" />
</Context>

Change this file to comment the Valve:

<Context antiResourceLocking="false" privileged="true" >
    <!--
    <Valve className="org.apache.catalina.valves.RemoteAddrValve"
         allow="127\.\d+\.\d+\.\d+|::1|0:0:0:0:0:0:0:1" />
    -->
</Context>

After that, refresh your browser (not need to restart Tomcat), you can see the manager page.

This all depends on how you're creating Foo, and how you intend to use .bar().

First, are you using a constructor-function for your object?

var myFoo = new Foo();

If so, then you can extend the Foo function's prototype property with .bar, like so:

function Foo () { /*...*/ }
Foo.prototype.bar = function () { /*...*/ };

var myFoo = new Foo();
myFoo.bar();

In this fashion, each instance of Foo now has access to the SAME instance of .bar.
To wit: .bar will have FULL access to this, but will have absolutely no access to variables within the constructor function:

function Foo () { var secret = 38; this.name = "Bob"; }
Foo.prototype.bar = function () { console.log(secret); };
Foo.prototype.otherFunc = function () { console.log(this.name); };

var myFoo = new Foo();
myFoo.otherFunc(); // "Bob";
myFoo.bar(); // error -- `secret` is undefined...
             // ...or a value of `secret` in a higher/global scope

In another way, you could define a function to return any object (not this), with .bar created as a property of that object:

function giveMeObj () {
    var private = 42,
        privateBar = function () { console.log(private); },
        public_interface = {
            bar : privateBar
        };

    return public_interface;
}

var myObj = giveMeObj();
myObj.bar(); // 42

In this fashion, you have a function which creates new objects.
Each of those objects has a .bar function created for them.
Each .bar function has access, through what is called closure, to the "private" variables within the function that returned their particular object.
Each .bar still has access to this as well, as this, when you call the function like myObj.bar(); will always refer to myObj (public_interface, in my example Foo).

The downside to this format is that if you are going to create millions of these objects, that's also millions of copies of .bar, which will eat into memory.

You could also do this inside of a constructor function, setting this.bar = function () {}; inside of the constructor -- again, upside would be closure-access to private variables in the constructor and downside would be increased memory requirements.

So the first question is:
Do you expect your methods to have access to read/modify "private" data, which can't be accessed through the object itself (through this or myObj.X)?

and the second question is: Are you making enough of these objects so that memory is going to be a big concern, if you give them each their own personal function, instead of giving them one to share?

For example, if you gave every triangle and every texture their own .draw function in a high-end 3D game, that might be overkill, and it would likely affect framerate in such a delicate system...

If, however, you're looking to create 5 scrollbars per page, and you want each one to be able to set its position and keep track of if it's being dragged, without letting every other application have access to read/set those same things, then there's really no reason to be scared that 5 extra functions are going to kill your app, assuming that it might already be 10,000 lines long (or more).

use:

String[] mStrings = new String[title.length];

Keep it simple!

An AsyncTask is background task which runs in the background thread. It takes an Input, performs Progress and gives Output.

ie AsyncTask<Input,Progress,Output>.

In my opinion the main source of confusion comes when we try to memorize the parameters in the AsyncTask.
The key is Don't memorize.
If you can visualize what your task really needs to do then writing the AsyncTask with the correct signature would be a piece of cake.
Just figure out what your Input, Progress and Output are and you will be good to go.

For example:

Heart of the AsyncTask!

doInBackgound() method is the most important method in an AsyncTask because

• Only this method runs in the background thread and publish data to UI thread.
• Its signature changes with the AsyncTask parameters.

So lets see the relationship

doInBackground() and onPostExecute(),onProgressUpdate() are also related

Show me the code
So how will I write the code for DownloadTask?

DownloadTask extends AsyncTask<String,Integer,String>{

      @Override
      public void onPreExecute()
      {}

      @Override
      public String doInbackGround(String... params)
      {
               // Download code
               int downloadPerc = // calculate that
               publish(downloadPerc);

               return "Download Success";
      }

      @Override
      public void onPostExecute(String result)
      {
          super.onPostExecute(result);
      }

      @Override
      public void onProgressUpdate(Integer... params)
      {
             // show in spinner, access UI elements
      }

}

How will you run this Task

new DownLoadTask().execute("Paradise.mp3");

As already noted by manu, XOR algorithm is a popular one which works for all integer values (that includes pointers then, with some luck and casting). For the sake of completeness I would like to mention another less powerful algorithm with addition/subtraction:

A = A + B
B = A - B
A = A - B

Here you have to be careful of overflows/underflows, but otherwise it works just as fine. You might even try this on floats/doubles in the case XOR isn't allowed on those.

I think the following is a good exhibit of Echo vs. Write-Host. Notice how test() actually returns an array of ints, not a single int as one could easily be led to believe.

function test {
    Write-Host 123
    echo 456 # AKA 'Write-Output'
    return 789
}

$x = test

Write-Host "x of type '$($x.GetType().name)' = $x"

Write-Host "`$x[0] = $($x[0])"
Write-Host "`$x[1] = $($x[1])"

Terminal output of the above:

123
x of type 'Object[]' = 456 789
$x[0] = 456
$x[1] = 789

That's the RHEL release version.

You can see the kernel version by typing uname -r. It'll be 2.6.something.

Yes, that is fine. $_POST is just another variable, except it has (super)global scope.

$_POST = array();

...will be quite enough. The loop is useless. It's probably best to keep it as an array rather than unset it, in case other files are attempting to read it and assuming it is an array.

You can use std::find for this:

#include <algorithm> // for std::find
#include <iterator> // for std::begin, std::end

int main () 
{
  int a[] = {3, 6, 8, 33};
  int x = 8;
  bool exists = std::find(std::begin(a), std::end(a), x) != std::end(a);
}

std::find returns an iterator to the first occurrence of x, or an iterator to one-past the end of the range if x is not found.

As others have already pointed out, the nameof operator does insert the name that the element was given in the sourcecode.

I would like to add that this is a really good idea in terms of refactoring since it makes this string refactoring safe. Previously, I used a static method which utilized reflection for the same purpose, but that has a runtime performance impact. The nameof operator has no runtime performance impact; it does its work at compile time. If you take a look at the MSIL code you will find the string embedded. See the following method and its disassembled code.

static void Main(string[] args)
{
    Console.WriteLine(nameof(args));
    Console.WriteLine("regular text");
}

// striped nops from the listing
IL_0001 ldstr args
IL_0006 call System.Void System.Console::WriteLine(System.String)
IL_000C ldstr regular text
IL_0011 call System.Void System.Console::WriteLine(System.String)
IL_0017 ret

However, that can be a drawback if you plan to obfuscate your software. After obfuscation the embedded string may no longer match the name of the element. Mechanisms that rely on this text will break. Examples for that, including but not limited to are: Reflection, NotifyPropertyChanged ...

Determining the name during runtime costs some performance, but is safe for obfuscation. If obfuscation is neither required nor planned, I would recommend using the nameof operator.

It works the same way for axes: parse(text='70^o*N') will raise the o as a superscript (the *N is to make sure the N doesn't get raised too).

labelsX=parse(text=paste(abs(seq(-100, -50, 10)), "^o ", "*W", sep=""))
labelsY=parse(text=paste(seq(50,100,10), "^o ", "*N", sep=""))
plot(-100:-50, 50:100, type="n", xlab="", ylab="", axes=FALSE)
axis(1, seq(-100, -50, 10), labels=labelsX)
axis(2, seq(50, 100, 10), labels=labelsY)
box()

That is really important for example when you are writing a network analyzer. packet headers are defined by the protocol specification, not by the way a particular platform's C compiler works.

Class is a template or type. An object is an instance of the class.

For example:

public class Tweet {

}

Tweet newTweet = new Tweet();

Tweet is a class and newTweet is an object of the class.

When i'm not root on the server, I use lsprofcalltree.py and run my program like this:

python lsprofcalltree.py -o callgrind.1 test.py

Then I can open the report with any callgrind-compatible software, like qcachegrind

In python, you wouldn't normally do what you are trying to do. But, the below code will do it:

strs = ["" for x in range(size)]

Here is a robust function for using UTL_File.putline that includes the necessary error handling. It also handles headers, footers and a few other exceptional cases.

PROCEDURE usp_OUTPUT_ToFileAscii(p_Path IN VARCHAR2, p_FileName IN VARCHAR2, p_Input IN refCursor, p_Header in VARCHAR2, p_Footer IN VARCHAR2, p_WriteMode VARCHAR2) IS

              vLine VARCHAR2(30000);
              vFile UTL_FILE.file_type; 
              vExists boolean;
              vLength number;
              vBlockSize number;
    BEGIN

        UTL_FILE.fgetattr(p_path, p_FileName, vExists, vLength, vBlockSize);

                 FETCH p_Input INTO vLine;
         IF p_input%ROWCOUNT > 0
         THEN
            IF vExists THEN
               vFile := UTL_FILE.FOPEN_NCHAR(p_Path, p_FileName, p_WriteMode);
            ELSE
               --even if the append flag is passed if the file doesn't exist open it with W.
                vFile := UTL_FILE.FOPEN(p_Path, p_FileName, 'W');
            END IF;
            --GET HANDLE TO FILE
            IF p_Header IS NOT NULL THEN 
              UTL_FILE.PUT_LINE(vFile, p_Header);
            END IF;
            UTL_FILE.PUT_LINE(vFile, vLine);
            DBMS_OUTPUT.PUT_LINE('Record count > 0');

             --LOOP THROUGH CURSOR VAR
             LOOP
                FETCH p_Input INTO vLine;

                EXIT WHEN p_Input%NOTFOUND;

                UTL_FILE.PUT_LINE(vFile, vLine);

             END LOOP;


             IF p_Footer IS NOT NULL THEN 
                UTL_FILE.PUT_LINE(vFile, p_Footer);
             END IF;

             CLOSE p_Input;
             UTL_FILE.FCLOSE(vFile);
        ELSE
          DBMS_OUTPUT.PUT_LINE('Record count = 0');

        END IF; 


    EXCEPTION
       WHEN UTL_FILE.INVALID_PATH THEN 
           DBMS_OUTPUT.PUT_LINE ('invalid_path'); 
           DBMS_OUTPUT.PUT_LINE(SQLERRM);
           RAISE;

       WHEN UTL_FILE.INVALID_MODE THEN 
           DBMS_OUTPUT.PUT_LINE ('invalid_mode'); 
           DBMS_OUTPUT.PUT_LINE(SQLERRM);
           RAISE;

       WHEN UTL_FILE.INVALID_FILEHANDLE THEN 
           DBMS_OUTPUT.PUT_LINE ('invalid_filehandle'); 
           DBMS_OUTPUT.PUT_LINE(SQLERRM);
           RAISE;

       WHEN UTL_FILE.INVALID_OPERATION THEN 
           DBMS_OUTPUT.PUT_LINE ('invalid_operation'); 
           DBMS_OUTPUT.PUT_LINE(SQLERRM);
           RAISE;

       WHEN UTL_FILE.READ_ERROR THEN  
           DBMS_OUTPUT.PUT_LINE ('read_error');
           DBMS_OUTPUT.PUT_LINE(SQLERRM);
           RAISE;

       WHEN UTL_FILE.WRITE_ERROR THEN 
          DBMS_OUTPUT.PUT_LINE ('write_error'); 
          DBMS_OUTPUT.PUT_LINE(SQLERRM);
           RAISE;

       WHEN UTL_FILE.INTERNAL_ERROR THEN 
          DBMS_OUTPUT.PUT_LINE ('internal_error'); 
          DBMS_OUTPUT.PUT_LINE(SQLERRM);
          RAISE;            
       WHEN OTHERS THEN
          DBMS_OUTPUT.PUT_LINE ('other write error'); 
          DBMS_OUTPUT.PUT_LINE(SQLERRM);
          RAISE;
    END;

When the WSDL is available, it is just two steps you need to follow to invoke that web service.

Step 1: Generate the client side source from a WSDL2Java tool

Step 2: Invoke the operation using:

YourService service = new YourServiceLocator();
Stub stub = service.getYourStub();
stub.operation();

If you look further, you will notice that the Stub class is used to invoke the service deployed at the remote location as a web service. When invoking that, your client actually generates the SOAP request and communicates. Similarly the web service sends the response as a SOAP. With the help of a tool like Wireshark, you can view the SOAP messages exchanged.

However since you have requested more explanation on the basics, I recommend you to refer here and write a web service with it's client to learn it further.

1. Flyweight is used with some values of Byte, Short, Integer, Long and String.
2. Facade is used in many place but the most obvious is Scripting interfaces.
3. Singleton - java.lang.Runtime comes to mind.
4. Abstract Factory - Also Scripting and JDBC API.
5. Command - TextComponent's Undo/Redo.
6. Interpreter - RegEx (java.util.regex.) and SQL (java.sql.) API.
7. Prototype - Not 100% sure if this count, but I thinkg clone() method can be used for this purpose.

If, like me, you need to keep your custom flow layout's itemSize dynamically updated based on your collection view's width, you should override your UICollectionViewFlowLayout's prepare() method. Here's a WWDC video demoing this technique.

class MyLayout: UICollectionViewFlowLayout {
    
    override func prepare() {
        super.prepare()
        
        guard let collectionView = collectionView else { return }
        
        itemSize = CGSize(width: ..., height: ...)
    }
    
}

In my case AutoMapper works well.

AutoMapper can map to/from dynamic objects without any explicit configuration:

public class Foo {
    public int Bar { get; set; }
    public int Baz { get; set; }
}
dynamic foo = new MyDynamicObject();
foo.Bar = 5;
foo.Baz = 6;

Mapper.Initialize(cfg => {});

var result = Mapper.Map<Foo>(foo);
result.Bar.ShouldEqual(5);
result.Baz.ShouldEqual(6);

dynamic foo2 = Mapper.Map<MyDynamicObject>(result);
foo2.Bar.ShouldEqual(5);
foo2.Baz.ShouldEqual(6);

Similarly you can map straight from dictionaries to objects, AutoMapper will line up the keys with property names.

more info https://github.com/AutoMapper/AutoMapper/wiki/Dynamic-and-ExpandoObject-Mapping

The limitation of execl is that when executing a shell command or any other script that is not in the current working directory, then we have to pass the full path of the command or the script. Example:

execl("/bin/ls", "ls", "-la", NULL);

The workaround to passing the full path of the executable is to use the function execlp, that searches for the file (1st argument of execlp) in those directories pointed by PATH:

execlp("ls", "ls", "-la", NULL);

http://pandas.pydata.org/pandas-docs/stable/generated/pandas.DataFrame.head.html?highlight=head#pandas.DataFrame.head

df2 = df.head(10)

should do the trick

The answers presented here are largely technically correct, but even though the response list is long and this will be at the bottom I thought it was worth putting an actually correct response in here too, just in case somebody stumbles upon it and learns something valuable from it. It's not that the rest of the answers are wrong, it's just that they aren't right. And, to stop the hordes of trolls, yes, I know that technically these annotations are effectively the same thing and most interchangeable even unto spring 5. Now, for the right answer:

These three annotations are completely different things and are not interchangeable. You can tell that because there are three of them rather than just one. They are not intended to be interchangeable, they're just implemented that way out of elegance and convenience.

Modern programming is invention, art, technique, and communication, in varying proportions. The communication bit is usually very important because code is usually read much more often than its written. As a programmer you're not only trying to solve the technical problem, you're also trying to communicate your intent to future programmers who read your code. These programmers may not share your native language, nor your social environment, and it is possible that they may be reading your code 50-years in the future (it's not as unlikely as you may think). It's difficult to communicate effectively that far into the future. Therefore, it is vital that we use the clearest, most efficient, correct, and communicative language available to us. That we chose our words carefully to have maximum impact and to be as clear as possible as to our intent.

For example, it is vital that @Repository is used when we're writing a repository, rather than @Component. The latter is a very poor choice of annotation for a repository because it does not indicate that we're looking at a repository. We can assume that a repository is also a spring-bean, but not that a component is a repository. With @Repository we are being clear and specific in our language. We are stating clearly that this is a repository. With @Component we are leaving it to the reader to decide what type of component they are reading, and they will have to read the whole class (and possibly a tree of subclasses and interfaces) to infer meaning. The class could then possibly be misinterpreted by a reader in the distant future as not being a repository, and we would have been partially responsible for this mistake because we, who knew full well that this is a repository, failed to be specific in our language and communicate effectively our intent.

I won't go into the other examples, but will state as clearly as I can: these annotations are completely different things and should be used appropriately, as per their intent. @Repository is for storage repositories and no other annotation is correct. @Service is for services and no other annotation is correct. @Component is for components that are neither repositories nor services, and to use either of these in its place would also be incorrect. It might compile, it might even run and pass your tests, but it would be wrong and I would think less of you (professionally) if you were to do this.

There are examples of this throughout spring (and programming in general). You must not use @Controller when writing a REST API, because @RestController is available. You must not use @RequestMapping when @GetMapping is a valid alternative. Etc. Etc. Etc. You must chose the most specific exact and correct language you can to communicate your intent to your readers, otherwise, you are introducing risks into your system, and risk has a cost.

It can be something so silly as you are transferring the file via FTP to a target machine, you go and run the .JAR file but this was so big that it has not yet been finished transferred :) Yes it happened to me..

This is what I did.

Note: Please check App.js for the code.

Link to source code

If you liked it, you can drop a star.??

Update:

import * as htmlToImage from 'html-to-image';
import download from 'downloadjs';

import logo from './logo.svg';
import './App.css';

const App = () => {
  const onButtonClick = () => {
    var domElement = document.getElementById('my-node');
    htmlToImage.toJpeg(domElement)
      .then(function (dataUrl) {
        console.log(dataUrl);
        download(dataUrl, 'image.jpeg');
      })
      .catch(function (error) {
        console.error('oops, something went wrong!', error);
      });
  };
  return (
    <div className="App" id="my-node">
      <header className="App-header">
        <img src={logo} className="App-logo" alt="logo" />
        <p>
          Edit <code>src/App.js</code> and save to reload.
        </p>
        <a
          className="App-link"
          href="https://reactjs.org"
          target="_blank"
          rel="noopener noreferrer"
        >
          Learn React
        </a><br></br>
        <button onClick={onButtonClick}>Download as JPEG</button>
      </header>
    </div>
  );
}

export default App;

Serialize data:

setcookie('cookie', serialize($info), time()+3600);

Then unserialize data:

$data = unserialize($_COOKIE['cookie'], ["allowed_classes" => false]);

After data, $info and $data will have the same content.

Just use Jet OLEDB: in your connection string. it solved for me.

an example is below:

"Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Data Source=E:\Database.mdb;Jet OLEDB:Database Password=b10w"

In the iOS Dev Center developer navigate to "Certificates, Identifiers & Profiles > iOS Apps > Identifiers > App IDs"

Find the app id you wish to delete, highlight it and select "Settings". At the bottom of the resulting screen there is a "Delete" button.

Previously the only way to do this was to use a Safari & Chrome extension written by Simon Whitaker

app-id-sanity downloads

It gives you an "Active" checkbox next to all your App IDs and allows you to relabel them to alter how they appear in the App ID drop-down when creating new provisioning profiles.

I just reset the device (erase all settings) and sync up with iTunes and now I can drag the app over to the phone library on iTunes (even though there is no apps tab). Once you sync. the app is then on the phone.

It may be because of the installation of Cors nuget packages.

If you facing the problem after installing and enabaling cors from nuget , then you may try reinstalling web Api.

From the package manager, run Update-Package Microsoft.AspNet.WebApi -reinstall

Did not like the event-bus approach using $on bindings in the child during create. Why? Subsequent create calls (I'm using vue-router) bind the message handler more than once--leading to multiple responses per message.

The orthodox solution of passing props down from parent to child and putting a property watcher in the child worked a little better. Only problem being that the child can only act on a value transition. Passing the same message multiple times needs some kind of bookkeeping to force a transition so the child can pick up the change.

I've found that if I wrap the message in an array, it will always trigger the child watcher--even if the value remains the same.

Parent:

{
   data: function() {
      msgChild: null,
   },
   methods: {
      mMessageDoIt: function() {
         this.msgChild = ['doIt'];
      }
   }   
   ...
}

Child:

{
   props: ['msgChild'],
   watch: {
      'msgChild': function(arMsg) {
         console.log(arMsg[0]);
      }
   }
}

HTML:

<parent>
   <child v-bind="{ 'msgChild': msgChild }"></child>
</parent>

As a matter of fact, specifying parameters explicitly as ?date='fulldatetime' worked like a charm. So this will be a solution for now: don't use commas, but use old GET approach.

Add

[config]="{backdrop: 'static'}"

to the model code.

While I think the regex-based solution is probably the way I'd go, I'd be tempted to encapsulate this in a type.

public class AlphaNumericString
{
    public AlphaNumericString(string s)
    {
        Regex r = new Regex("^[a-zA-Z0-9]*$");
        if (r.IsMatch(s))
        {
            value = s;                
        }
        else
        {
            throw new ArgumentException("Only alphanumeric characters may be used");
        }
    }

    private string value;
    static public implicit operator string(AlphaNumericString s)
    {
        return s.value;
    }
}

Now, when you need a validated string, you can have the method signature require an AlphaNumericString, and know that if you get one, it is valid (apart from nulls). If someone attempts to pass in a non-validated string, it will generate a compiler error.

You can get fancier and implement all of the equality operators, or an explicit cast to AlphaNumericString from plain ol' string, if you care.

Use the JavaScript charAt function to get a character at a given 0-indexed position. Use length to find out how long the String is. You want the last character so that's length - 1. Example:

var word = "linto.yahoo.com.";
var last = word.charAt(word.length - 1);
alert('The last character is:' + last);

My setup:

• Apache 2.4.10 (running off Debian)
• Node.js (version 4.1.1) App running on port 3000 that accepts WebSockets at path /api/ws

As mentioned above by @Basj, make sure a2enmod proxy and ws_tunnel are enabled.

This is a screenshot of the Apache config file that solved my problem:

The relevant part as text:

<VirtualHost *:80>
  ServerName *******
  ServerAlias *******
  ProxyPass / http://localhost:3000/
  ProxyPassReverse / http://localhost:3000/

  <Location "/api/ws">
      ProxyPass "ws://localhost:3000/api/ws"
  </Location>
</VirtualHost>

Hope that helps.

Perhaps not a "builtin", but I consider it builtin. anyways just use numpy

import numpy 
prod_sum = numpy.prod(some_list)

Probably the only valid reason for using

set enable_seqscan=false

is when you're writing queries and want to quickly see what the query plan would actually be were there large amounts of data in the table(s). Or of course if you need to quickly confirm that your query is not using an index simply because the dataset is too small.

Changes to be committed: (use "git reset HEAD ..." to unstage)

The error is in your string formatting.

The correct way to use traditional string formatting using the '%' operator is to use a printf-style format string (Python documentation for this here: http://docs.python.org/2/library/string.html#format-string-syntax):

"'%s' is longer than '%s'" % (name1, name2)

However, the '%' operator will probably be deprecated in the future. The new PEP 3101 way of doing things is like this:

"'{0}' is longer than '{1}'".format(name1, name2)

Yes, You actually can do that only by using CSS...

body { width:100%; margin-right: 0; margin-left:0; padding-right:0; padding-left:0; }

Tell me if it works

You can use "find" for remove all files in the /objects directory with 0 in size with the command:

find .git/objects/ -size 0 -delete

Backup is recommended.

Try this code. It works for me:

unzip(zipfile="<directory and filename>",
      exdir="<directory where the content will be extracted>")

Example:

unzip(zipfile="./data/Data.zip",exdir="./data")

IMPORTANT NOTE: You should not concatenate SQL queries unless you trust the user completely. Query concatenation involves risk of SQL Injection being used to take over the world, ...khem, your database.

If you don't want to go into details how to execute query using SqlCommand then you could call the same command line like this:

string userInput = "Brian";
var process = new Process();
var startInfo = new ProcessStartInfo();
startInfo.WindowStyle = ProcessWindowStyle.Hidden;
startInfo.FileName = "cmd.exe";
startInfo.Arguments = string.Format(@"sqlcmd.exe -S .\PDATA_SQLEXPRESS -U sa -P 2BeChanged! -d PDATA_SQLEXPRESS  
     -s ; -W -w 100 -Q "" SELECT tPatCulIntPatIDPk, tPatSFirstname, tPatSName,
     tPatDBirthday  FROM  [dbo].[TPatientRaw] WHERE tPatSName = '{0}' """, userInput);

process.StartInfo = startInfo;
process.Start();

Just ensure that you escape each double quote " with ""

When you say adding antMatchers doesnt help - what do you mean? antMatchers is exactly how you do it. Something like the following should work (obviously changing your URL appropriately):

@Override
    public void configure(HttpSecurity http) throws Exception {
        http.authorizeRequests()
                .antMatchers("/authFailure").permitAll()
                .antMatchers("/resources/**").permitAll()
                .anyRequest().authenticated()

If you are still not having any joy, then you will need to provide more details/stacktrace etc.

Details of XML to Java config switch is here

In my case, the problem was that I was building on a, older virtual machine which was based on Win7.

I found this fix from https://github.com/NuGet/NuGetGallery/issues/8176#issuecomment-683923724 :

nuget.org started enforcing the use of TLS 1.2 (and dropped support for TLS 1.1 and 1.0) earlier this year. Windows 7 has TLS 1.2 disabled by default (check the DisabledByDefault value under HKLM\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client in your registry). To enable the support, please make sure you have an update (*) installed and switch the support on:

reg add HKLM\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client" /v DisabledByDefault /t REG_DWORD /d 0 /f /reg:32
reg add "HKLM\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client" /v DisabledByDefault /t REG_DWORD /d 0 /f /reg:64
reg add "HKLM\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client" /v Enabled /t REG_DWORD /d 1 /f /reg:32
reg add "HKLM\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client" /v Enabled /t REG_DWORD /d 1 /f /reg:64

The (*) update referred to was Microsoft kb3140245: Update for Windows 7 (KB3140245)

I installed the update, rebooted (as requested by the update), added those registry keys, and then Nuget worked fine.

The Error is here

lastrow = wsPOR.Range("A" & Rows.Count).End(xlUp).Row + 1

wsPOR is a workbook and not a worksheet. If you are working with "Sheet1" of that workbook then try this

lastrow = wsPOR.Sheets("Sheet1").Range("A" & _
          wsPOR.Sheets("Sheet1").Rows.Count).End(xlUp).Row + 1

Similarly

wsPOR.Range("A2:G" & lastrow).Select

should be

wsPOR.Sheets("Sheet1").Range("A2:G" & lastrow).Select

Suppose logical address space is **32 bit so total possible logical entries will be 2^32 and other hand suppose each page size is 4 byte then size of one page is *2^2*2^10=2^12...* now we know that no. of pages in page table is pages=total possible logical address entries/page size so pages=2^32/2^12 =2^20 Now suppose that each entry in page table takes 4 bytes then total size of page table in *physical memory will be=2^2*2^20=2^22=4mb***

Swift 3.0, 4.0

There are mainly two ways of checking optional for nil. Here are examples with comparison between them

1. if let

if let is the most basic way to check optional for nil. Other conditions can be appended to this nil check, separated by comma. The variable must not be nil to move for the next condition. If only nil check is required, remove extra conditions in the following code.

Other than that, if x is not nil, the if closure will be executed and x_val will be available inside. Otherwise the else closure is triggered.

if let x_val = x, x_val > 5 {
    //x_val available on this scope
} else {

}

2. guard let

guard let can do similar things. It's main purpose is to make it logically more reasonable. It's like saying Make sure the variable is not nil, otherwise stop the function. guard let can also do extra condition checking as if let.

The differences are that the unwrapped value will be available on same scope as guard let, as shown in the comment below. This also leads to the point that in else closure, the program has to exit the current scope, by return, break, etc.

guard let x_val = x, x_val > 5 else {
    return
}
//x_val available on this scope

After some more research, it appears, for Mozilla/Firefox, that Array.sort() uses mergesort. See the code here.

h5py provides a model of datasets and groups. The former is basically arrays and the latter you can think of as directories. Each is named. You should look at the documentation for the API and examples:

http://docs.h5py.org/en/latest/quick.html

A simple example where you are creating all of the data upfront and just want to save it to an hdf5 file would look something like:

In [1]: import numpy as np
In [2]: import h5py
In [3]: a = np.random.random(size=(100,20))
In [4]: h5f = h5py.File('data.h5', 'w')
In [5]: h5f.create_dataset('dataset_1', data=a)
Out[5]: <HDF5 dataset "dataset_1": shape (100, 20), type "<f8">

In [6]: h5f.close()

You can then load that data back in using: '

In [10]: h5f = h5py.File('data.h5','r')
In [11]: b = h5f['dataset_1'][:]
In [12]: h5f.close()

In [13]: np.allclose(a,b)
Out[13]: True

Definitely check out the docs:

http://docs.h5py.org

Writing to hdf5 file depends either on h5py or pytables (each has a different python API that sits on top of the hdf5 file specification). You should also take a look at other simple binary formats provided by numpy natively such as np.save, np.savez etc:

http://docs.scipy.org/doc/numpy/reference/routines.io.html

- (void)performAndWait:(void (^)(dispatch_semaphore_t semaphore))perform;
{
  NSParameterAssert(perform);
  dispatch_semaphore_t semaphore = dispatch_semaphore_create(0);
  perform(semaphore);
  dispatch_semaphore_wait(semaphore, DISPATCH_TIME_FOREVER);
  dispatch_release(semaphore);
}

Example usage:

[self performAndWait:^(dispatch_semaphore_t semaphore) {
  [self someLongOperationWithSuccess:^{
    dispatch_semaphore_signal(semaphore);
  }];
}];

Here you go with:

from b in _dbContext.Burden 
join bl in _dbContext.BurdenLookups on
new { Organization_Type = b.Organization_Type_ID, Cost_Type = b.Cost_Type_ID } equals
new { Organization_Type = bl.Organization_Type_ID, Cost_Type = bl.Cost_Type_ID }

i try to use the sentence of a prior post and don't work recursively, then read some help and get this line:

find . -name "*.pyc" -exec git rm -f "{}" \;

p.d. is necessary to add *.pyc in .gitignore file to maintain git clean

echo "*.pyc" >> .gitignore

Enjoy.

I though I'd add one more way. In my case I supply this to com.hazelcast.config.XmlConfigBuilder which only needs java.util.Properties to resolve some properties inside the Hazelcast XML configuration file, i.e. it only calls getProperty(String) method. So, this allowed me to do what I needed:

@RequiredArgsConstructor
public class SpringReadOnlyProperties extends Properties {

  private final org.springframework.core.env.Environment delegate;

  @Override
  public String getProperty(String key) {
    return delegate.getProperty(key);
  }

  @Override
  public String getProperty(String key, String defaultValue) {
    return delegate.getProperty(key, defaultValue);
  }

  @Override
  public synchronized String toString() {
    return getClass().getName() + "{" + delegate + "}";
  }

  @Override
  public boolean equals(Object o) {
    if (this == o) return true;
    if (o == null || getClass() != o.getClass()) return false;
    if (!super.equals(o)) return false;
    SpringReadOnlyProperties that = (SpringReadOnlyProperties) o;
    return delegate.equals(that.delegate);
  }

  @Override
  public int hashCode() {
    return Objects.hash(super.hashCode(), delegate);
  }

  private void throwException() {
    throw new RuntimeException("This method is not supported");
  }

  //all methods below throw the exception

  * override all methods *
}

P.S. I ended up not using this specifically for Hazelcast because it only resolves properties for XML file but not at runtime. Since I also use Spring, I decided to go with a custom org.springframework.cache.interceptor.AbstractCacheResolver#getCacheNames. This resolves properties for both situations, at least if you use properties in cache names.

This worked for me, found it long time ago somewhere.

// SortableObservableCollection
public class SortableObservableCollection<T> : ObservableCollection<T>
    {
        public SortableObservableCollection(List<T> list)
            : base(list)
        {
        }

        public SortableObservableCollection()
        {
        }

        public void Sort<TKey>(Func<T, TKey> keySelector, System.ComponentModel.ListSortDirection direction)
        {
            switch (direction)
            {
                case System.ComponentModel.ListSortDirection.Ascending:
                    {
                        ApplySort(Items.OrderBy(keySelector));
                        break;
                    }
                case System.ComponentModel.ListSortDirection.Descending:
                    {
                        ApplySort(Items.OrderByDescending(keySelector));
                        break;
                    }
            }
        }

        public void Sort<TKey>(Func<T, TKey> keySelector, IComparer<TKey> comparer)
        {
            ApplySort(Items.OrderBy(keySelector, comparer));
        }

        private void ApplySort(IEnumerable<T> sortedItems)
        {
            var sortedItemsList = sortedItems.ToList();

            foreach (var item in sortedItemsList)
            {
                Move(IndexOf(item), sortedItemsList.IndexOf(item));
            }
        }
    }

Usage:

MySortableCollection.Sort(x => x, System.ComponentModel.ListSortDirection.Ascending);

This post was helpful, but just wanted to share a slight alternative that may help others:

Setting max-height instead of height also does the trick. In my case, I'm disabling scrolling based on a class toggle. Setting .someContainer {height: 100%; overflow: hidden;} when the container's height is smaller than that of the viewport would stretch the container, which wouldn't be what you'd want. Setting max-height accounts for this, but if the container's height is greater than the viewport's when the content changes, still disables scrolling.

rather use a custom javascript-method inside the action attribute of the form!

eg

<html>
    <head>
        <script language="javascript" type="text/javascript">
        var input1 = null;
        var input2 = null;
        function InitInputs() {
            if (input1 == null) {
                input1 = document.getElementById("input1");
            }
            if (input2 == null) {
                input2 = document.getElementById("input2");
            }

            if (input1 == null) {
                alert("input1 missing");
            }
            if (input2 == null) {
                alert("input2 missing");
            }
        }
        function myMethod1() {
            InitInputs();
            alert(input1.value + " " + input2.value);
        }
        function myMethod2() {
            InitInputs();
            alert(input1.value);
        }
        </script>
    </head>
    <body>
        <form action="javascript:myMethod1();">
            <input id="input1" type="text" />
            <input id="input2" type="text" />
            <input type="button" onclick="myMethod2()" value="myMethod2"/>
            <input type="submit" value="myMethod1" />
        </form>
    </body>
</html>

now starting 2015 all (major?) browsers seem to alow c.width and c.height to get the canvas internal size, but:

the question as the answers are missleading, because the a canvas has in principle 2 different/independent sizes.

The "html" lets say CSS width/height and its own (attribute-) width/height

look at this short example of different sizing, where I put a 200/200 canvas into a 300/100 html-element

With most examples (all I saw) there is no css-size set, so theese get implizit the width and height of the (drawing-) canvas size. But that is not a must, and can produce funy results, if you take the wrong size - ie. css widht/height for inner positioning.

I found the Invalidate() creating too much of flickering. Here's my situation. A custom control I am developing draws its whole contents via handling the Paint event.

this.Paint += this.OnPaint;

This handler calls a custom routine that does the actual painting.

private void OnPaint(object sender, PaintEventArgs e)
{
    this.DrawFrame(e.Graphics);
}

To simulate scrolling I want to repaint my control every time the cursor moves while the left mouse button is pressed. My first choice was using the Invalidate() like the following.

private void RedrawFrame()
{
    var r = new Rectangle(
        0, 0, this.Width, this.Height);

    this.Invalidate(r);
    this.Update();
}

The control scrolls OK but flickers far beyond any comfortable level. So I decided, instead of repainting the control, to call my custom DrawFrame() method directly after handling the MouseMove event. That produced a smooth scrolling with no flickering.

private void RedrawFrame()
{
    var g = Graphics.FromHwnd(this.Handle);
    this.DrawFrame(g);
}

This approach may not be applicable to all situations, but so far it suits me well.

Here is a way to do it without adding an ID to the form elements.

<form method="post">
    ...
    <select name="List">
        <option value="1">Test1</option>
        <option value="2">Test2</option>
    </select>
    <select name="List">
        <option value="3">Test3</option>
        <option value="4">Test4</option>
    </select>
    ...
</form>

public ActionResult OrderProcessor()
{
    string[] ids = Request.Form.GetValues("List");
}

Then ids will contain all the selected option values from the select lists. Also, you could go down the Model Binder route like so:

public class OrderModel
{
    public string[] List { get; set; }
}

public ActionResult OrderProcessor(OrderModel model)
{
    string[] ids = model.List;
}

Hope this helps.

TO ADD: @Christopher's answer does not work on API 7/8 (as per @Jonny's correct comment) IF you are using colours, instead of drawables. (In my testing, using drawables as per Christopher works fine)

Here is the FIX for 2.3 and below when using colours:

• Android: Entire ListView changes color on focus, not just ListView child item

As per @Charles Harley, there is a bug in 2.3 and below where filling the list item with a colour causes the colour to flow out over the whole list. His fix is to define a shape drawable containing the colour you want, and to use that instead of the colour.

I suggest looking at this link if you want to just use a colour as selector, and are targeting Android 2 (or at least allow for Android 2).

You have to specify the width to the body for it to center on the page.

Or put all the content in the div and center it.

<body>
    <div>
    jhfgdfjh
    </div>
</body>?

div {
    margin: 0px auto;
    width:400px;
}

?

You would need to do something like this. I am typing this off the top of my head, so this may not be 100% correct.

CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); CGContextRef context = CGBitmapContextCreate(NULL, 640, 360, 8, 4 * width, colorSpace, kCGImageAlphaPremultipliedFirst); CGColorSpaceRelease(colorSpace);  CGContextDrawImage(context, CGRectMake(0,-160,640,360), cgImgFromAVCaptureSession);  CGImageRef image = CGBitmapContextCreateImage(context); UIImage* myCroppedImg = [UIImage imageWithCGImage:image]; CGContextRelease(context);       

A long shot, but double-check with Firebug (or similar) that you aren't accidentally inheriting the following rule:

white-space:nowrap;

This may override your specified line break behaviour.

This is an old, but still very relevant topic. The current top answer works well, but only for very small dots. As Bhojendra Rauniyar already pointed out in the comments, for larger (>2px) dots, the dots appear square, not round. I found this page searching for spaced dots, not spaced squares (or even dashes, as some answers here use).

Building on this, I used radial-gradient. Also, using the answer from Ukuser32, the dot-properties can easily be repeated for all four borders. Only the corners are not perfect.

div {_x000D_
    padding: 1em;_x000D_
    background-image:_x000D_
        radial-gradient(circle at 2.5px, #000 1.25px, rgba(255,255,255,0) 2.5px),_x000D_
        radial-gradient(circle, #000 1.25px, rgba(255,255,255,0) 2.5px),_x000D_
        radial-gradient(circle at 2.5px, #000 1.25px, rgba(255,255,255,0) 2.5px),_x000D_
        radial-gradient(circle, #000 1.25px, rgba(255,255,255,0) 2.5px);_x000D_
    background-position: top, right, bottom, left;_x000D_
    background-size: 15px 5px, 5px 15px;_x000D_
    background-repeat: repeat-x, repeat-y;_x000D_
}

<div>Some content with round, spaced dots as border</div>

The radial-gradient expects:

• the shape and optional position
• two or more stops: a color and radius

Here, I wanted a 5 pixel diameter (2.5px radius) dot, with 2 times the diameter (10px) between the dots, adding up to 15px. The background-size should match these.

The two stops are defined such that the dot is nice and smooth: solid black for half the radius and than a gradient to the full radius.

Use the "containment" option:

jQuery UI API - Draggable Widget - containment

The documentation says it only accepts the values: 'parent', 'document', 'window', [x1, y1, x2, y2] but I seem to remember it will accept a selector such as '#container' too.

If you are using Toolbar, you don't need those solutions. You only have to change the theme of the toolbar

app:theme="@style/ThemeOverlay.AppCompat.Light"

app:theme="@style/ThemeOverlay.AppCompat.Dark.ActionBar"

If you are using a dark.actionBar your back button is going to be white else if you are using light actionbar theme it is going to be black.

In my case I am using ionic and I simply closed the dialog went to apps in the emulator and ran my app from there instead. This worked. I got the idea of that from here since it was just a time out issue.

What seems easy is actually tricky if you want to be completely compatible.

var e = document.createElement('div');

Let's say you have an id of 'div1' to add.

e['id'] = 'div1';
e.id = 'div1';
e.attributes['id'] = 'div1';
e.createAttribute('id','div1')

But there are contingencies, of course. Will not work in IE prior to 8:e.attributes['style'] Will not error but won't actually set the class, it must be className:e['class'] .
However, if you're using attributes then this WILL work:e.attributes['class']

In summary, think of attributes as literal and object-oriented.

In literal, you just want it to spit out x='y' and not think about it. This is what attributes, setAttribute, createAttribute is for (except for IE's style exception). But because these are really objects things can get confused.

Since you are going to the trouble of properly creating a DOM element instead of jQuery innerHTML slop, I would treat it like one and stick with the e.className = 'fooClass' and e.id = 'fooID'. This is a design preference, but in this instance trying to treat is as anything other than an object works against you.

It will never backfire on you like the other methods might, just be aware of class being className and style being an object so it's style.width not style="width:50px". Also remember tagName but this is already set by createElement so you shouldn't need to worry about it.

This was longer than I wanted, but CSS manipulation in JS is tricky business.

If you don't want to change to numeric you can try this.

> as.vector(t(df)[,1])
[1] 1.0 2.0 2.6

I usually just run ez_setup.py. IIRC, that works fine, at least with UAC off.

It also creates an easy_install executable in your Python\scripts subdirectory, which should be in your PATH.

UPDATE: I highly recommend not to bother with easy_install anymore! Jump right to pip, it's better in every regard!
Installation is just as simple: from the installation instructions page, you can download get-pip.py and run it. Works just like the ez_setup.py mentioned above.

You can simply try this and it should work in most cases, feel free to correct me if I am wrong :

function hereLies(obj) { 
  if(obj.val() != "") { 
    //Do this here 
  }
}

Where obj is the object of your textarea.

<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>_x000D_
<html>_x000D_
<body>_x000D_
<textarea placeholder="Insert text here..." rows="5" cols="12"></textarea>_x000D_
<button id="checkerx">Check</button>_x000D_
<p>Value is not null!</p>_x000D_
_x000D_
<script>_x000D_
  $("p").hide();_x000D_
  $("#checkerx").click(function(){_x000D_
      if($("textarea").val() != ""){_x000D_
        $("p").show();_x000D_
      }_x000D_
      else{_x000D_
       $("p").replaceWith("<p>Value is null!</p>");_x000D_
      }_x000D_
  });_x000D_
_x000D_
</script>_x000D_
</body></html>

ppl = []
while (input=gets.chomp)
 if !input.empty?
  ppl << input
 else
 p ppl; puts "Goodbye"; break
 end
end

This was the only thing that worked for me on Armbian:

dmesg | grep -oE 'mac=.*\w+' | cut -b '5-'

If you do not increase the height of navbar..

 .navbar .brand {
 position: fixed;    
 overflow: visible;
 padding-left: 0;    
 padding-top: 0;
 }

see http://jsfiddle.net/petrfox/S84wP/

Just single if conditions

<select name="category_type[]" id="category_type" class="select2 m-b-10 select2-multiple" style="width: 100%" multiple="multiple" data-placeholder="Choose" tooltip="Select Category Type">
 @foreach ($categoryTypes as $categoryType)
  <option value="{{ $categoryType->id }}"
    **@if(in_array($categoryType->id,
     request()->get('category_type')??[]))selected="selected"
    @endif**>
     {{ ucfirst($categoryType->title) }}</option>
     @endforeach
 </select>

Web Hosting Challenge

You have to remember that none of the machine configuration options are available if you are hosted on a shared server as many of us (smaller companies and individuals) are.

ASP.NET MVC Overhead

My site takes at least 30 seconds when it hasn't been hit in over 20 minutes (and the web app has been stopped). It is terrible.

Another Way to Test Performance

There's another way to test if it is your ASP.NET MVC start up or something else. Drop a normal HTML page on your site where you can hit it directly.
If the problem is related to ASP.NET MVC start up then the HTML page will render almost immediately even when the web app hasn't been started.
That's how I first recognized that the problem was in the ASP.NET MVC startup. I loaded an HTML page at any time and it would load blazing fast. Then, after hitting that HTML page I'd hit one of my ASP.NET MVC URLs and I'd get the Chrome message "Waiting for raddev.us..."

Another Test With Helpful Script

After that I wrote a LINQPad (check out http://linqpad.net for more) script that would hit my web site every 8 minutes (less than the time for the app to unload -- which should be 20 minutes) and I let it run for hours.

While the script was running I hit my web site and every time my site came up blazingly fast. This gives me a good idea that most likely the slowness I was experiencing was because of ASP.NET MVC startup times.

Get LinqPad and you can run the following script -- just change the URL to your own and let it run and you can test this easily. Good luck.

NOTE: In LinqPad you'll need to press F4 and add a reference to System.Net to add the library which will retrieve your page.

ALSO : make sure you change the String URL variable to point at a URL that will load a route from your ASP.NET MVC site so the engine will run.

System.Timers.Timer webKeepAlive = new System.Timers.Timer();
Int64 counter = 0;
void Main()
{
    webKeepAlive.Interval = 5000;
    webKeepAlive.Elapsed += WebKeepAlive_Elapsed;
    webKeepAlive.Start();
}

private void WebKeepAlive_Elapsed(object sender, System.Timers.ElapsedEventArgs e)
{
    webKeepAlive.Stop();
    try
    {
        // ONLY the first time it retrieves the content it will print the string
        String finalHtml = GetWebContent();
        if (counter < 1)
        {
            Console.WriteLine(finalHtml);
        }
        counter++;
    }
    finally
    {
        webKeepAlive.Interval = 480000; // every 8 minutes
        webKeepAlive.Start();
    }
}

public String GetWebContent()
{
    try
    {
    String URL = "http://YOURURL.COM";
    WebRequest request = WebRequest.Create(URL);
    WebResponse response = request.GetResponse();
    Stream data = response.GetResponseStream();
    string html = String.Empty;
    using (StreamReader sr = new StreamReader(data))
    {
        html = sr.ReadToEnd();
    }
    Console.WriteLine (String.Format("{0} : success",DateTime.Now));
    return html;
    }
    catch (Exception ex)
    {
        Console.WriteLine (String.Format("{0} -- GetWebContent() : {1}",DateTime.Now,ex.Message));
        return "fail";
    }
}

Use function.call:

var f = function () { console.log(this); }
f.call(that, arg1, arg2, etc);

Where that is the object which you want this in the function to be.

I solved this on 12.10 by installing libssl-dev.

sudo apt-get install libssl-dev

The input itself is hidden with CSS visibility:hidden.

Then you can have whatever element you whish - anchor or image.., when the anchor/image is clicked, trigger a click on the hidden input field - the dialog box for selecting a file will appear.

EDIT: Actually it works in Chrome and Safari, I just noticed that is not the case in FF4Beta

This is quite simple.

Assuming the data is stored in a column called A in a table called T, you can use

select A, count(A) from T group by A

With all credit to LukeH, I've put together some extension methods for easy use:

public static DateTime FromUnixTime(this long unixTime)
{
    var epoch = new DateTime(1970, 1, 1, 0, 0, 0, DateTimeKind.Utc);
    return epoch.AddSeconds(unixTime);
}

public static long ToUnixTime(this DateTime date)
{
    var epoch = new DateTime(1970, 1, 1, 0, 0, 0, DateTimeKind.Utc);
    return Convert.ToInt64((date - epoch).TotalSeconds);
}

Note the comment below from CodesInChaos that the above FromUnixTime returns a DateTime with a Kind of Utc, which is fine, but the above ToUnixTime is much more suspect in that doesn't account for what kind of DateTime the given date is. To allow for date's Kind being either Utc or Local, use ToUniversalTime:

public static long ToUnixTime(this DateTime date)
{
    var epoch = new DateTime(1970, 1, 1, 0, 0, 0, DateTimeKind.Utc);
    return Convert.ToInt64((date.ToUniversalTime() - epoch).TotalSeconds);
}

ToUniversalTime will convert a Local (or Unspecified) DateTime to Utc.

if you dont want to create the epoch DateTime instance when moving from DateTime to epoch you can also do:

public static long ToUnixTime(this DateTime date)
{
    return (date.ToUniversalTime().Ticks - 621355968000000000) / 10000000;
}

If you're fetching data using Wordpress, then you can access the number of rows returned using $wpdb->num_rows:

$wpdb->get_results( $wpdb->prepare('select * from mytable where foo = %s', $searchstring));
echo $wpdb->num_rows;

If you want a specific count based on a mysql count query then you do this:

$numrows = $wpdb->get_var($wpdb->prepare('SELECT COUNT(*) FROM mytable where foo = %s', $searchstring );
echo $numrows;

If you're running updates or deletes then the count of rows affected is returned directly from the function call:

$numrowsaffected = $wpdb->query($wpdb->prepare(
   'update mytable set val=%s where myid = %d', $valuetoupdate, $myid));

This applies also to $wpdb->update and $wpdb->delete.

Add attribute as:

$('#Selector_id').attr('disabled',true);

Installing freetype:

sudo apt update && sudo apt install freetype2-demos

public static class UnixTime
    {
        private static readonly DateTime Epoch = new DateTime(1970, 1, 1, 0, 0, 0, 0);

        public static DateTime UnixTimeToDateTime(double unixTimeStamp)
        {
            return Epoch.AddSeconds(unixTimeStamp).ToUniversalTime();
        }
    }

you can call UnixTime.UnixTimeToDateTime(double datetime))

It means you asked it to include the library 'libz.a' or 'libz.so' containing a compression package, and although the compiler found some files, none of them was suitable for the build you are using.

You either need to change your build parameters or you need to get the correct library installed or you need to specify where the correct library is on the link command line with a -L/where/it/is/lib type option.

Try this

Sub Txt2Col()
    Dim rng As Range

    Set rng = [C7]
    Set rng = Range(rng, Cells(Rows.Count, rng.Column).End(xlUp))

    rng.TextToColumns Destination:=rng, DataType:=xlDelimited, ' rest of your settings

Update: button click event to act on another sheet

Private Sub CommandButton1_Click()
    Dim rng As Range
    Dim sh As Worksheet

    Set sh = Worksheets("Sheet2")
    With sh
        Set rng = .[C7]
        Set rng = .Range(rng, .Cells(.Rows.Count, rng.Column).End(xlUp))

        rng.TextToColumns Destination:=rng, DataType:=xlDelimited, _
        TextQualifier:=xlDoubleQuote,  _
        ConsecutiveDelimiter:=False, _
        Tab:=False, _
        Semicolon:=False, _
        Comma:=True, 
        Space:=False, 
        Other:=False, _
        FieldInfo:=Array(Array(1, xlGeneralFormat), Array(2, xlGeneralFormat), Array(3, xlGeneralFormat)), _
        TrailingMinusNumbers:=True
    End With
End Sub

Note the .'s (eg .Range) they refer to the With statement object

$start = microtime(true);
for ($i = 0; $i < 10000; ++$i) {
    // do something
}
$total = microtime(true) - $start;
echo $total;

$(function() {

$("#username_error_message").hide();
$("#password_error_message").hide();
$("#retype_password_error_message").hide();
$("#email_error_message").hide();

var error_username = false;
var error_password = false;
var error_retype_password = false;
var error_email = false;

$("#form_username").focusout(function() {

    check_username();
    
});

$("#form_password").focusout(function() {

    check_password();
    
});

$("#form_retype_password").focusout(function() {

    check_retype_password();
    
});

$("#form_email").focusout(function() {

    check_email();
    
});

function check_username() {

    var username_length = $("#form_username").val().length;
    
    if(username_length < 5 || username_length > 20) {
        $("#username_error_message").html("Should be between 5-20 characters");
        $("#username_error_message").show();
        error_username = true;
    } else {
        $("#username_error_message").hide();
    }

}

function check_password() {

    var password_length = $("#form_password").val().length;
    
    if(password_length < 8) {
        $("#password_error_message").html("At least 8 characters");
        $("#password_error_message").show();
        error_password = true;
    } else {
        $("#password_error_message").hide();
    }

}

function check_retype_password() {

    var password = $("#form_password").val();
    var retype_password = $("#form_retype_password").val();
    
    if(password !=  retype_password) {
        $("#retype_password_error_message").html("Passwords don't match");
        $("#retype_password_error_message").show();
        error_retype_password = true;
    } else {
        $("#retype_password_error_message").hide();
    }

}

function check_email() {

    var pattern = new RegExp(/^[+a-zA-Z0-9._-]+@[a-zA-Z0-9.-]+\.[a-zA-Z]{2,4}$/i);

    if(pattern.test($("#form_email").val())) {
        $("#email_error_message").hide();
    } else {
        $("#email_error_message").html("Invalid email address");
        $("#email_error_message").show();
        error_email = true;
    }

}

$("#registration_form").submit(function() {
                                        
    error_username = false;
    error_password = false;
    error_retype_password = false;
    error_email = false;
                                        
    check_username();
    check_password();
    check_retype_password();
    check_email();
    
    if(error_username == false && error_password == false && error_retype_password == false && error_email == false) {
        return true;
    } else {
        return false;   
    }

});

});

Try this

select count(*) from table where cast(col as double) is null;

Spaces are used for separating Arguments. In your case C:\Program becomes argument. If your file path contains spaces then add Double quotation marks. Then cmd will recognize it as single argument.

In my case, i succeeded by doing this:

1- enable 'Auto-Rotate', if it isn´t yet.
2- either use rotation left-right option at panel located next to the virtual device, or click (ctrl + left/right arrow key), in order to rotate the device.

Hope it works for you.

Use this CSS (jsFiddle example):

input:disabled.btn:hover,
input:disabled.btn:active,
input:disabled.btn:focus {
  color: green
}

You have to write the most outer element on the left and the most inner element on the right.

.btn:hover input:disabled would select any disabled input elements contained in an element with a class btn which is currently hovered by the user.

I would prefer :disabled over [disabled], see this question for a discussion: Should I use CSS :disabled pseudo-class or [disabled] attribute selector or is it a matter of opinion?

By the way, Laravel (PHP) generates the HTML - not the browser.

I had a similar issue and using %in% operator instead of the == (equality) operator was the solution:

# %in%

Hope it helps.

In my case it was because i was connecting to HTTP and it was running on HTTPS

There is actually another way of looking at this problem, not as a number problem, but a Unary problem, starting with the base character of Roman numbers, "I". So we represent the number with just I, and then we replace the characters in ascending value of the roman characters.

public String getRomanNumber(int number) {
    return join("", nCopies(number, "I"))
            .replace("IIIII", "V")
            .replace("IIII", "IV")
            .replace("VV", "X")
            .replace("VIV", "IX")
            .replace("XXXXX", "L")
            .replace("XXXX", "XL")
            .replace("LL", "C")
            .replace("LXL", "XC")
            .replace("CCCCC", "D")
            .replace("CCCC", "CD")
            .replace("DD", "M")
            .replace("DCD", "CM");
}

I especially like this method of solving this problem rather than using a lot of ifs and while loops, or table lookups. It is also actually a quit intuitive solution when you thinking of the problem not as a number problem.

This works for me:

pg_ctl -D /usr/local/var/[email protected] stop;
brew services stop [email protected];
brew services start [email protected];

List<T> batch = collection.subList(i,i+nextInc);
->
List<T> batch = collection.subList(i, i = i + nextInc);

Today, I mistakenly checked out on a commit and started working on it, making some commits on a detach HEAD state. Then I pushed to the remote branch using the following command:

git push origin HEAD: <My-remote-branch>

Then

git checkout <My-remote-branch>

Then

git pull

I finally got my all changes in my branch that I made in detach HEAD.

I always just use NOW():

INSERT INTO table (lastModifiedTime) VALUES (NOW())

http://dev.mysql.com/doc/refman/5.1/en/date-and-time-functions.html#function_now

I am using this code without each loop:

$('.subscribe-form').submit(function(e){
    var arr=$(this).serializeArray();
    var values={};
    for(i in arr){values[arr[i]['name']]=arr[i]['value']}
    console.log(values);
    return false;
});

If you need to pass data from one controller to another you must pass data by route values.Because both are different request.if you send data from one page to another then you have to user query string(same as route values).

But you can do one trick :

In your calling action call the called action as a simple method :

public class ServerController : Controller
{
 [HttpPost]
 public ActionResult ApplicationPoolsUpdate(ServiceViewModel viewModel)
 {
      XDocument updatedResultsDocument = myService.UpdateApplicationPools();
      ApplicationPoolController pool=new ApplicationPoolController(); //make an object of ApplicationPoolController class.

      return pool.UpdateConfirmation(updatedResultsDocument); // call the ActionMethod you want as a simple method and pass the model as an argument.
      // Redirect to ApplicationPool controller and pass
      // updatedResultsDocument to be used in UpdateConfirmation action method
 }
}