Make sure your

AutowiringSpringBeanJobFactory extends SpringBeanJobFactory 

dependency is pulled from

    "org.springframework:spring-context-support:4..."

and NOT from

    "org.springframework:spring-support:2..."

It wanted me to use

@Override
public Job newJob(TriggerFiredBundle bundle, Scheduler scheduler)

instead of

@Override
protected Object createJobInstance(final TriggerFiredBundle bundle)

so was failing to autowire job instance.

Programmatic formatting solution:

The JSON.stringify method supported by many modern browsers (including IE8) can output a beautified JSON string:

JSON.stringify(jsObj, null, "\t"); // stringify with tabs inserted at each level
JSON.stringify(jsObj, null, 4);    // stringify with 4 spaces at each level

Demo: http://jsfiddle.net/AndyE/HZPVL/

This method is also included with json2.js, for supporting older browsers.

Manual formatting solution

If you don't need to do it programmatically, Try JSON Lint. Not only will it prettify your JSON, it will validate it at the same time.

There are commercial products such as ionCube (which I use), source guardian, and Zen Guard.

There are also postings on the net which claim they can reverse engineer the encoded programs. How reliable they are is questionable, since I have never used them.

Note that most of these solutions require an encoder to be installed on their servers. So you may want to make sure your client is comfortable with that.

You get the cursor position by calling GetCursorPos.

POINT p;
if (GetCursorPos(&p))
{
    //cursor position now in p.x and p.y
}

This returns the cursor position relative to screen coordinates. Call ScreenToClient to map to window coordinates.

if (ScreenToClient(hwnd, &p))
{
    //p.x and p.y are now relative to hwnd's client area
}

You hide and show the cursor with ShowCursor.

ShowCursor(FALSE);//hides the cursor
ShowCursor(TRUE);//shows it again

You must ensure that every call to hide the cursor is matched by one that shows it again.

I like the xargs solution, but if it's important to not collapse spaces, then one might instead do:

sed ':b;$!{N;bb};s/\n/ /g'

That will replace newlines for spaces, without substituting the last line terminator like tr '\n' ' ' would.

This also allows you to use other joining strings besides a space, like a comma, etc, something that xargs cannot do:

$ seq 1 5 | sed ':b;$!{N;bb};s/\n/,/g'
1,2,3,4,5

One more point I want to add. In spring-servlet.xml we include component scan for Controller package. In following example we include filter annotation for controller package.

<!-- Scans for annotated @Controllers in the classpath -->
<context:component-scan base-package="org.test.web" use-default-filters="false">
    <context:include-filter type="annotation" expression="org.springframework.stereotype.Controller"/>
</context:component-scan>

In applicationcontext.xml we add filter for remaining package excluding controller.

<context:component-scan base-package="org.test">
        <context:exclude-filter type="annotation" expression="org.springframework.stereotype.Controller"/>
    </context:component-scan>

Thanks to Chris for his awesome answer, I took it one step further and automated the process of running those statements (my table had over 8,000 permissions)

if object_id('dbo.tempPermissions') is not null
Drop table dbo.tempPermissions

Create table tempPermissions(ID int identity , Queries Varchar(255))


Insert into tempPermissions(Queries)


select 'GRANT ' + dp.permission_name collate latin1_general_cs_as
   + ' ON ' + s.name + '.' + o.name + ' TO ' + dpr.name 
   FROM sys.database_permissions AS dp
   INNER JOIN sys.objects AS o ON dp.major_id=o.object_id
   INNER JOIN sys.schemas AS s ON o.schema_id = s.schema_id
   INNER JOIN sys.database_principals AS dpr ON dp.grantee_principal_id=dpr.principal_id
   WHERE dpr.name NOT IN ('public','guest')

declare @count int, @max int, @query Varchar(255)
set @count =1
set @max = (Select max(ID) from tempPermissions)
set @query = (Select Queries from tempPermissions where ID = @count)

while(@count < @max)
begin
exec(@query)
set @count += 1
set @query = (Select Queries from tempPermissions where ID = @count)
end

select * from tempPermissions

drop table tempPermissions

additionally to restrict it to a single table add:

  and o.name = 'tablename'

after the WHERE dpr.name NOT IN ('public','guest') and remember to edit the select statement so that it generates statements for the table you want to grant permissions 'TO' Not the table the permissions are coming 'FROM' (which is what the script does).

This worked for me:

String dat="02/08/2017";
long date=new SimpleDateFormat("dd/MM/yyyy").parse(dat,newParsePosition(0)).getTime();
java.sql.Date dbDate=new java.sql.Date(date);
System.out.println(dbDate);

there is a alternative to margin-left:auto; margin-right: auto; or margin:0 auto; for the ones that use position:absolute; this is how:
you set the left position of the element to 50% (left:50%;) but that will not center it correctly in order for the element to be centered correctly you need to give it a margin of minus half of it`s width, that will center your element perfectly

here is an example: http://jsfiddle.net/35ERq/3/

As to your bonus question, try if (jQuery.inArray(jQuery("input:first").val(), ar) < 0)

The error message seems self-explanatory. You can't instantiate an instance of an interface, and you've declared IUser as an interface. (The same rule applies to abstract classes.) The whole point of an interface is that it doesn't do anything—there is no implementation provided for its methods.

However, you can instantiate an instance of a class that implements that interface (provides an implementation for its methods), which in your case is the User class.

Thus, your code needs to look like this:

IUser user = new User();

This instantiates an instance of the User class (which provides the implementation), and assigns it to an object variable for the interface type (IUser, which provides the interface, the way in which you as the programmer can interact with the object).

Of course, you could also write:

User user = new User();

which creates an instance of the User class and assigns it to an object variable of the same type, but that sort of defeats the purpose of a defining a separate interface in the first place.

I'm guessing public Method AddMethod(string aName) is defined on a public interface that FBlock implements. Consumers of that interface are not guaranteed to have access to Method.

It sounds like your workbook got set to Manual Calculation. You can change this to Automatic by going to Formulas > Calculation > Calculation Options > Automatic.

Manual calculation can be useful to reduce computational load and improve responsiveness in workbooks with large amounts of formulas. The idea is that you can look at data and make changes, then choose when you want to make your computer go through the effort of calculation.

select with no lock - will select records which may / may not going to be inserted. you will read a dirty data.

for example - lets say a transaction insert 1000 rows and then fails.

when you select - you will get the 1000 rows.

Recent enhancements by NVIDIA have produced a much more robust way to do this.

Essentially they have found a way to avoid the need to install the CUDA/GPU driver inside the containers and have it match the host kernel module.

Instead, drivers are on the host and the containers don't need them. It requires a modified docker-cli right now.

This is great, because now containers are much more portable.

A quick test on Ubuntu:

# Install nvidia-docker and nvidia-docker-plugin
wget -P /tmp https://github.com/NVIDIA/nvidia-docker/releases/download/v1.0.1/nvidia-docker_1.0.1-1_amd64.deb
sudo dpkg -i /tmp/nvidia-docker*.deb && rm /tmp/nvidia-docker*.deb

# Test nvidia-smi
nvidia-docker run --rm nvidia/cuda nvidia-smi

For more details see: GPU-Enabled Docker Container and: https://github.com/NVIDIA/nvidia-docker

One quick note. Generators are cancellable, async/await — not. So for an example from the question, it does not really make sense of what to pick. But for more complicated flows sometimes there is no better solution than using generators.

So, another idea could be is to use generators with redux-thunk, but for me, it seems like trying to invent a bicycle with square wheels.

And of course, generators are easier to test.

Please don't use techniques described in other answers here. They are either not working with css3 animations size changes, floating layout changes or changes that don't come from jQuery land. You can use a resize-detector, a event-based approach, that doesn't waste your CPU time.

https://github.com/marcj/css-element-queries

It contains a ResizeSensor class you can use for that purpose.

new ResizeSensor(jQuery('#mainContent'), function(){ 
    console.log('main content dimension changed');
});

Disclaimer: I wrote this library

The LISTAGG analytic function was introduced in Oracle 11g Release 2, making it very easy to aggregate strings. If you are using 11g Release 2 you should use this function for string aggregation. Please refer below url for more information about string concatenation.

http://www.oracle-base.com/articles/misc/StringAggregationTechniques.php

String Concatenation

I was getting e.data.indexOf is not a function error, after debugging it, I found that it was actually a TypeError, which meant, indexOf() being a function is applicable to strings, so I typecasted the data like the following and then used the indexOf() method to make it work

e.data.toString().indexOf('<stringToBeMatchedToPosition>')

Not sure if my answer was accurate to the question, but yes shared my opinion as i faced a similar kind of situation.

Quick and dirty

use DB; 

OR

\DB::table...

I noticed there was not an actual full code answer, so as i come across this, i have created a function, that does change the font, which can be easily modified. I have tested this in

- XP SP3 and Win 10 Pro 64

private void SetFont(Form f, string name, int size, FontStyle style)
{
    Font replacementFont = new Font(name, size, style);
    f.Font = replacementFont;
}

Hint: replace Form to either Label, RichTextBox, TextBox, or any other relative control that uses fonts to change the font on them. By using the above function thus making it completely dynamic.

    /// To call the function do this.
    /// e.g in the form load event etc.

public Form1()
{
      InitializeComponent();
      SetFont(this, "Arial", 8, FontStyle.Bold);  
      // This sets the whole form and 
      // everything below it.
      // Shaun Cassidy.
}

You can also, if you want a full libary so you dont have to code all the back end bits, you can download my dll from Github.

Github DLL

/// and then import the namespace
using Droitech.TextFont;

/// Then call it using:
TextFontClass fClass = new TextFontClass();
fClass.SetFont(this, "Arial", 8, FontStyle.Bold);

Simple.

This is an interesting question and since it isn't explained very explicitly in the documentation I'll answer this by going through the sourcecode of mod_rewrite; demonstrating a big benefit of open-source.

In the top section you'll quickly spot the defines used to name these flags:

#define CONDFLAG_NONE               1<<0
#define CONDFLAG_NOCASE             1<<1
#define CONDFLAG_NOTMATCH           1<<2
#define CONDFLAG_ORNEXT             1<<3
#define CONDFLAG_NOVARY             1<<4

and searching for CONDFLAG_ORNEXT confirms that it is used based on the existence of the [OR] flag:

else if (   strcasecmp(key, "ornext") == 0
         || strcasecmp(key, "OR") == 0    ) {
    cfg->flags |= CONDFLAG_ORNEXT;
}

The next occurrence of the flag is the actual implementation where you'll find the loop that goes through all the RewriteConditions a RewriteRule has, and what it basically does is (stripped, comments added for clarity):

# loop through all Conditions that precede this Rule
for (i = 0; i < rewriteconds->nelts; ++i) {
    rewritecond_entry *c = &conds[i];

    # execute the current Condition, see if it matches
    rc = apply_rewrite_cond(c, ctx);

    # does this Condition have an 'OR' flag?
    if (c->flags & CONDFLAG_ORNEXT) {
        if (!rc) {
            /* One condition is false, but another can be still true. */
            continue;
        }
        else {
            /* skip the rest of the chained OR conditions */
            while (   i < rewriteconds->nelts
                   && c->flags & CONDFLAG_ORNEXT) {
                c = &conds[++i];
            }
        }
    }
    else if (!rc) {
        return 0;
    }
}

You should be able to interpret this; it means that OR has a higher precedence, and your example indeed leads to if ( (A OR B) AND (C OR D) ). If you would, for example, have these Conditions:

RewriteCond A [or]
RewriteCond B [or]
RewriteCond C
RewriteCond D

it would be interpreted as if ( (A OR B OR C) and D ).

You can use the SYS_GUID() function to generate a GUID in your insert statement:

insert into mytable (guid_col, data) values (sys_guid(), 'xxx');

The preferred datatype for storing GUIDs is RAW(16).

As Gopinath answer:

 select sys_guid() from dual
 union all
 select sys_guid() from dual
 union all 
 select sys_guid() from dual

You get

88FDC68C75DDF955E040449808B55601
88FDC68C75DEF955E040449808B55601
88FDC68C75DFF955E040449808B55601

As Tony Andrews says, differs only at one character

88FDC68C75DDF955E040449808B55601
88FDC68C75DEF955E040449808B55601
88FDC68C75DFF955E040449808B55601

Maybe useful: http://feuerthoughts.blogspot.com/2006/02/watch-out-for-sequential-oracle-guids.html

When I'm converting from JSX to TSX and we keep some libraries as js/jsx and convert others to ts/tsx I almost always forget to change the js/jsx import statements in the TSX\TS files from

import * as ComponentName from "ComponentName";

to

import ComponentName from "ComponentName";

If calling an old JSX (React.createClass) style component from TSX, then use

var ComponentName = require("ComponentName")

I'm using fixed width string-parts (padded with whitespace) to avoid having the formatter mess up my SQL string indentation. This gives you mixed results, and won't work where whitespace is not ignored as it is in SQL, but can be helpful.

    final String sql = "SELECT v.value FROM properties p               "
            + "JOIN property_values v ON p.property_id = v.property_id "
            + "WHERE p.product_id = ?                                  "
            + "AND v.value        IS NOT NULL                          ";

I think the best way is by using TableAdapters rather than using Commands objects, its Update method sends all changes mades (Updates,Inserts and Deletes) inside a Dataset or DataTable straight TO the database. Usually when using a DataGridView you bind to a BindingSource which lets you interact with a DataSource such as Datatables or Datasets.

If you work like this, then on your bounded DataGridView you can just do:

this.customersBindingSource.EndEdit();
this.myTableAdapter.Update(this.myDataSet.Customers);

The 'customersBindingSource' is the DataSource of the DataGridView.

The adapter's Update method will update a single data table and execute the correct command (INSERT, UPDATE, or DELETE) based on the RowState of each data row in the table.

From: https://msdn.microsoft.com/en-us/library/ms171933.aspx

So any changes made inside the DatagridView will be reflected on the Database when using the Update method.

More about TableAdapters: https://msdn.microsoft.com/en-us/library/bz9tthwx.aspx

tmp = df.groupby(['A'])['c'].transform('mean')

is like

tmp1 = df.groupby(['A']).agg({'c':'mean'})
tmp = df['A'].map(tmp1['c'])

or

tmp1 = df.groupby(['A'])['c'].mean()
tmp = df['A'].map(tmp1)

Use jackson library and @ResponseBody annotation on return type for the Controller.

This works if you wish to return POJOs represented as JSon. If you woud like to return String and not POJOs as JSon please refer to Sotirious answer.

this is the code for set method

public void setAge(int age){
  this.age = age;
}

I used the answer by @Spenhouet and added more "replacements"-possibilities than "*". For example "?". Just add your needs to the dict in replaceHelper.

/**
 * @param {string} str
 * @param {string} rule
 * checks match a string to a rule
 * Rule allows * as zero to unlimited numbers and ? as zero to one character
 * @returns {boolean}
 */
function matchRule(str, rule) {
  const escapeRegex = (str) => str.replace(/([.*+?^=!:${}()|\[\]\/\\])/g, "\\$1");
  return new RegExp("^" + replaceHelper(rule, {"*": "\\d*", "?": ".?"}, escapeRegex) + "$").test(str);
}

function replaceHelper(input, replace_dict, last_map) {
  if (Object.keys(replace_dict).length === 0) {
    return last_map(input);
  }
  const split_by = Object.keys(replace_dict)[0];
  const replace_with = replace_dict[split_by];
  delete replace_dict[split_by];
  return input.split(split_by).map((next_input) => replaceHelper(next_input, replace_dict, last_map)).join(replace_with);
}

For anyone reading who wants ONLY the time in the output, you can pass options to JavaScript's Date::toLocaleString() method. Example:

var date = new Date("February 04, 2011 19:00:00");_x000D_
var options = {_x000D_
  hour: 'numeric',_x000D_
  minute: 'numeric',_x000D_
  hour12: true_x000D_
};_x000D_
var timeString = date.toLocaleString('en-US', options);_x000D_
console.log(timeString);

timeString will be set to:

8:00 AM

Add "second: 'numeric'" to your options if you want seconds too. For all option see this.

In front-end JavaScript/HTML, you can load a binary file as an image, you do not have to convert to base64:

<img src="http://engci.nabisco.com/artifactory/repo/folder/my-image">

my-image is a binary image file. This will load just fine.

This is for Laravel 5.1 and I am not sure does it work for earlier versions but if somebody search on Google and lands here it might be handy in middleware handle function gets $request parameter:

$request->server->get('SERVER_NAME')

outside of middleware handle method you can access it by helper function request()

request()->server->get('SERVER_NAME')

Nice shorthand for Multiple variable assignments

{% set label_cls, field_cls = "col-md-7", "col-md-3" %}

If you have a lot of variables in your Rdata file and don't want them to clutter your global environment, create a new environment and load all of the data to this new environment.

load(file.path("C:/Users/isfar.RData"), isfar_env <- new.env() )

# Access individual variables in the RData file using '$' operator
isfar_env$var_name 

# List all of the variable names in RData:
ls(isfar_env)

npm install -g npm-install-peers

it will add all the missing peers and remove all the error

1- Install compression

npm install compression

2- Use it

var express     = require('express')
var compression = require('compression')

var app = express()
app.use(compression())

compression on Github

Move the Directory clause out of the virtualhost, and put it before declaring the virtualhost.

Drove me nuts for a long time too. Don't know why. It's a Debian thing.

Starting with C#6 you can use null propagation: myList?.Any() == true

If you still find this too cloggy or prefer a good ol' extension method, I would recommend Matt Greer and Marc Gravell's answers, yet with a bit of extended functionality for completeness.

Their answers provide the same basic functionality, but each from another perspective. Matt's answer uses the string.IsNullOrEmpty-mentality, whereas Marc's answer takes Linq's .Any() road to get the job done.

I am personally inclined to use the .Any() road, but would like to add the condition checking functionality from the method's other overload:

    public static bool AnyNotNull<T>(this IEnumerable<T> source, Func<T, bool> predicate = null)
    {
        if (source == null) return false;
        return predicate == null
            ? source.Any()
            : source.Any(predicate);
    }

So you can still do things like : myList.AnyNotNull(item=>item.AnswerToLife == 42); as you could with the regular .Any() but with the added null check

Note that with the C#6 way: myList?.Any() returns a bool? rather than a bool, which is the actual effect of propagating null

Unfortunately this isn't entirely possible as the ClassLoader won't tell you what classes are available. You can, however, get fairly close doing something like this:

for (String classpathEntry : System.getProperty("java.class.path").split(System.getProperty("path.separator"))) {
    if (classpathEntry.endsWith(".jar")) {
        File jar = new File(classpathEntry);

        JarInputStream is = new JarInputStream(new FileInputStream(jar));

        JarEntry entry;
        while( (entry = is.getNextJarEntry()) != null) {
            if(entry.getName().endsWith(".class")) {
                // Class.forName(entry.getName()) and check
                //   for implementation of the interface
            }
        }
    }
}

Edit: johnstok is correct (in the comments) that this only works for standalone Java applications, and won't work under an application server.

Easy with Docker version 1.10.1, build 9e83765.

First you need to create your own docker network (mynet123)

docker network create --subnet=172.18.0.0/16 mynet123

then, simply run the image (I'll take ubuntu as example)

docker run --net mynet123 --ip 172.18.0.22 -it ubuntu bash

then in ubuntu shell

ip addr

Additionally you could use

• --hostname to specify a hostname
• --add-host to add more entries to /etc/hosts

Docs (and why you need to create a network) at https://docs.docker.com/engine/reference/commandline/network_create/

First, check git status.
As the OP mentions,

The actual issue was an unresolved merge conflict from the merge, NOT that the stash would cause a merge conflict.

That is where git status would mention that file as being "both modified"

Resolution: Commit the conflicted file.

You can find a similar situation 4 days ago at the time of writing this answer (March 13th, 2012) with this post: "‘Pull is not possible because you have unmerged files’":

julita@yulys:~/GNOME/baobab/help/C$ git stash pop
help/C/scan-remote.page: needs merge
unable to refresh index

What you did was to fix the merge conflict (editing the right file, and committing it):
See "How do I fix merge conflicts in Git?"

What the blog post's author did was:

julita@yulys:~/GNOME/baobab/help/C$ git reset --hard origin/mallard-documentation
HEAD is now at ff2e1e2 Add more steps for optional information for scanning.

I.e aborting the current merge completely, allowing the git stash pop to be applied.
See "Aborting a merge in Git".

Those are your two options.

Here is some weak adobe documentation on different flash 9 wmode settings.

A note of caution on wmode transparent is here in the adobe bug trac.

And new for flash 10, are two new wmodes: gpu and direct. Please refer to Adobe Knowledge Base about wmode.

Per the Javadoc:

Returns the value of a request parameter as a String, or null if the parameter does not exist.

Do note that it is possible to submit an empty parameter - such that the parameter exists, but has no value. For example, I could include &log=&somethingElse into the URL to enable logging, without needing to specify &log=true. In this case, the value will be an empty String ("").

Sorry but all the answers I see here are either hacky or fail if you sneeze a little harder.

If you use a table you can (if you wish) add a space between the divs, set borders, padding...

<table width="100%" cellspacing="0">
    <tr>
        <td style="width:50%;">A</td>
        <td style="width:50%;">B</td>            
    </tr>
</table>

Check a more complete example here: http://jsfiddle.net/qPduw/5/

40 methods in a single class is a bit much.

Would it make sense to move some of the functionality into other - suitably named - classes. Then it is much easier to make sense of.

When you have fewer, it is much easier to list them in a natural reading order. A frequent paradigm is to list things either before or after you need them , in the order you need them.

This usually means that main() goes on top or on bottom.

Try storing the connection string along with the password in a variable and assign the variable in the connection string using expression.I also faced the same issue and I solved like dis.

Using ex/vi editor and globstar option (syntax similar to awk and sed):

ex +"/string1/,/string3/p" -R -scq! file.txt

where aaa is your starting point, and bbb is your ending text.

To search recursively, try:

ex +"/aaa/,/bbb/p" -scq! **/*.py

^{Note: To enable ** syntax, run shopt -s globstar (Bash 4 or zsh).}

To check for assignability, you can use the Type.IsAssignableFrom method:

typeof(SomeType).IsAssignableFrom(typeof(Derived))

This will work as you expect for type-equality, inheritance-relationships and interface-implementations but not when you are looking for 'assignability' across explicit / implicit conversion operators.

To check for strict inheritance, you can use Type.IsSubclassOf:

typeof(Derived).IsSubclassOf(typeof(SomeType))

A little improved and wrapped into a manager solution.

Things to keep in mind. FragmentManager is not a singleton, it manages only Fragments within Activity, so in every activity it will be new. Also, this solution so far doesn't take ViewPager into account that calls setUserVisibleHint() method helping to control visiblity of Fragments.

Feel free to use following classes when dealing with this issue (uses Dagger2 injection). Call in Activity:

//inject FragmentBackstackStateManager instance to myFragmentBackstackStateManager
FragmentManager fragmentManager = getSupportFragmentManager(); 
myFragmentBackstackStateManager.apply(fragmentManager);

FragmentBackstackStateManager.java:

@Singleton
public class FragmentBackstackStateManager {

    private FragmentManager fragmentManager;

    @Inject
    public FragmentBackstackStateManager() {
    }

    private BackstackCallback backstackCallbackImpl = new BackstackCallback() {
        @Override
        public void onFragmentPushed(Fragment parentFragment) {
            parentFragment.onPause();
        }

        @Override
        public void onFragmentPopped(Fragment parentFragment) {
            parentFragment.onResume();
        }
    };

    public FragmentBackstackChangeListenerImpl getListener() {
        return new FragmentBackstackChangeListenerImpl(fragmentManager, backstackCallbackImpl);
    }

    public void apply(FragmentManager fragmentManager) {
        this.fragmentManager = fragmentManager;
        fragmentManager.addOnBackStackChangedListener(getListener());
    }
}

FragmentBackstackChangeListenerImpl.java:

public class FragmentBackstackChangeListenerImpl implements FragmentManager.OnBackStackChangedListener {

    private int lastBackStackEntryCount = 0;
    private final FragmentManager fragmentManager;
    private final BackstackCallback backstackChangeListener;

    public FragmentBackstackChangeListenerImpl(FragmentManager fragmentManager, BackstackCallback backstackChangeListener) {
        this.fragmentManager = fragmentManager;
        this.backstackChangeListener = backstackChangeListener;
        lastBackStackEntryCount = fragmentManager.getBackStackEntryCount();
    }

    private boolean wasPushed(int backStackEntryCount) {
        return lastBackStackEntryCount < backStackEntryCount;
    }

    private boolean wasPopped(int backStackEntryCount) {
        return lastBackStackEntryCount > backStackEntryCount;
    }

    private boolean haveFragments() {
        List<Fragment> fragmentList = fragmentManager.getFragments();
        return fragmentList != null && !fragmentList.isEmpty();
    }


    /**
     * If we push a fragment to backstack then parent would be the one before => size - 2
     * If we pop a fragment from backstack logically it should be the last fragment in the list, but in Android popping a fragment just makes list entry null keeping list size intact, thus it's also size - 2
     *
     * @return fragment that is parent to the one that is pushed to or popped from back stack
     */
    private Fragment getParentFragment() {
        List<Fragment> fragmentList = fragmentManager.getFragments();
        return fragmentList.get(Math.max(0, fragmentList.size() - 2));
    }

    @Override
    public void onBackStackChanged() {
        int currentBackStackEntryCount = fragmentManager.getBackStackEntryCount();
        if (haveFragments()) {
            Fragment parentFragment = getParentFragment();

            //will be null if was just popped and was last in the stack
            if (parentFragment != null) {
                if (wasPushed(currentBackStackEntryCount)) {
                    backstackChangeListener.onFragmentPushed(parentFragment);
                } else if (wasPopped(currentBackStackEntryCount)) {
                    backstackChangeListener.onFragmentPopped(parentFragment);
                }
            }
        }

        lastBackStackEntryCount = currentBackStackEntryCount;
    }
}

BackstackCallback.java:

public interface BackstackCallback {
    void onFragmentPushed(Fragment parentFragment);

    void onFragmentPopped(Fragment parentFragment);
}

I had the same issue when I copy-pasted the command. Instead, when I typed-in the entire command, it worked!

Good Luck...

They have wrapped most stuff need to solve your problem, one of the tests looks like this:

String filename = CSSURLEmbedderTest.class.getResource("folder.png").getPath().replace("%20", " ");
String code = "background: url(folder.png);";

StringWriter writer = new StringWriter();
embedder = new CSSURLEmbedder(new StringReader(code), true);
embedder.embedImages(writer, filename.substring(0, filename.lastIndexOf("/")+1));

String result = writer.toString();
assertEquals("background: url(" + folderDataURI + ");", result);

I ran into this issue as well and found this post. Ultimately none of these answers solved my problem, instead I had to put in a rewrite rule to strip out the location /rt as the backend my developers made was not expecting any additional paths:

+-(william@wkstn18)--(Thu, 05 Nov 20)-+
+-(~)--(16:13)->wscat -c ws://WebsocketServerHostname/rt
error: Unexpected server response: 502

Testing with wscat repeatedly gave a 502 response. Nginx error logs provided the same upstream error as above, but notice the upstream string shows the GET Request is attempting to access localhost:12775/rt and not localhost:12775:

 2020/11/05 22:13:32 [error] 10175#10175: *7 upstream prematurely closed
 connection while reading response header from upstream, client: WANIP,
 server: WebsocketServerHostname, request: "GET /rt/socket.io/?transport=websocket
 HTTP/1.1", upstream: "http://127.0.0.1:12775/rt/socket.io/?transport=websocket",
 host: "WebsocketServerHostname"

Since the devs had not coded their websocket (listening on 12775) to expect /rt/socket.io but instead just /socket.io/ (NOTE: /socket.io/ appears to just be a way to specify websocket transport discussed here). Because of this, rather than ask them to rewrite their socket code I just put in a rewrite rule to translate WebsocketServerHostname/rt to WebsocketServerHostname:12775 as below:

upstream websocket-rt {
        ip_hash;

        server 127.0.0.1:12775;
}

server {
        listen 80;
        server_name     WebsocketServerHostname;

        location /rt {
                proxy_http_version 1.1;

                #rewrite /rt/ out of all requests and proxy_pass to 12775
                rewrite /rt/(.*) /$1  break;

                proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
                proxy_set_header Host $host;

                proxy_pass http://websocket-rt;
                proxy_set_header Upgrade $http_upgrade;
                proxy_set_header Connection $connection_upgrade;
        }

}

Is it legal? Yes, changing your location on Android is legal. Likewise, you can change VPN settings in Microsoft Edge on your PC, and all this is within the law. VPN allows you to change your IP address, safeguarding your privacy and protecting your actual location from being exposed. However, VPN laws may vary from country to country. There are restrictions in some regions.

Brief summary: Yes, you can change your region on Android and a VPN is a necessary assistant for this. It's simple, safe and legal. Today, VPN is the best way to change the region and unblock sites with regional restrictions.

There should be svn utility on you box, if installed:

$ svn checkout http://example.com/svn/somerepo somerepo

This will check out a working copy from a specified repository to a directory somerepo on our file system.

You may want to print commands, supported by this utility:

$ svn help

uname -a output in your question is identical to one, used by Parallels Virtuozzo Containers for Linux 4.0 kernel, which is based on Red Hat 5 kernel, thus your friends are rpm or the following command:

$ sudo yum install subversion

Change

 mAdapter = new RecordingsListAdapter(this, recordings);

to

 mAdapter = new RecordingsListAdapter(getActivity(), recordings);

and also make sure that recordings!=null at mAdapter = new RecordingsListAdapter(this, recordings);

Create private/public key:

1. Open up terminal (git bash, PowerShell, cmd.exe etc.)
2. Type in ssh-keygen
3. Press enter for default file save (~/.ssh/id_rsa)
4. Press enter for default passphrase (no passphrase)
5. Press enter again
6. Look at the output and make sure that the RSA is 3072 or above

You have now created a private/public key pair.

For GIT the key must have a strength of 2048, must be located in the users .ssh directory and be called id_rsa and id_rsa.pub. When pasting the keys anywhere make sure to use a program that does not add new lines like VIM.

TGrid is another option that people don't usually find in a google search. If the other grids you find don't suit your needs, you can give it a try, its free

Separate your rules with a semi colon in a single declaration:

<span style="color:blue;font-style:italic">Test</span>

ALTER function get_occurance_index(@delimiter varchar(1),@occurence int,@String varchar(100))
returns int
AS Begin
--Declare @delimiter varchar(1)=',',@occurence int=2,@String varchar(100)='a,b,c'
Declare @result int
 ;with T as (
    select 1 Rno,0 as row, charindex(@delimiter, @String) pos,@String st
    union all
    select Rno+1,pos + 1, charindex(@delimiter, @String, pos + 1), @String
    from T
    where pos > 0
)
select  @result=pos 
from T 
where pos > 0   and rno = @occurence 
return isnull(@result,0)
ENd


declare @data as table (data varchar(100))
insert into @data values('1,2,3') 
insert into @data values('aaa,bbbbb,cccc') 
select top  3 Substring (data,0,dbo.get_occurance_index( ',',1,data)) ,--First Record always starts with 0
Substring (data,dbo.get_occurance_index( ',',1,data)+1,dbo.get_occurance_index( ',',2,data)-dbo.get_occurance_index( ',',1,data)-1) ,
Substring (data,dbo.get_occurance_index( ',',2,data)+1,len(data)) , -- Last record cant be more than len of actual data
data 
From @data 

Accepted answer works like a charm but if the object has a list of objects it won't work as expected so here is my solution after some digging.

Following this thread advice, here is how I've done.

• Frontend: stringify your object than encode it in base64 for submission.
• Backend: decode base64 string then convert the string json into desired object.

It isn't the best for debugging your API with postman but it is working as expected for me.

Original object: { page: 1, size: 5, filters: [{ field: "id", value: 1, comparison: "EQ" }

Encoded object: eyJwYWdlIjoxLCJzaXplIjo1LCJmaWx0ZXJzIjpbeyJmaWVsZCI6ImlkUGFyZW50IiwiY29tcGFyaXNvbiI6Ik5VTEwifV19

@GetMapping
fun list(@RequestParam search: String?): ResponseEntity<ListDTO> {
    val filter: SearchFilterDTO = decodeSearchFieldDTO(search)
    ...
}

private fun decodeSearchFieldDTO(search: String?): SearchFilterDTO {
    if (search.isNullOrEmpty()) return SearchFilterDTO()
    return Gson().fromJson(String(Base64.getDecoder().decode(search)), SearchFilterDTO::class.java)
}

And here the SearchFilterDTO and FilterDTO

class SearchFilterDTO(
    var currentPage: Int = 1,
    var pageSize: Int = 10,
    var sort: Sort? = null,
    var column: String? = null,
    var filters: List<FilterDTO> = ArrayList<FilterDTO>(),
    var paged: Boolean = true
)

class FilterDTO(
    var field: String,
    var value: Any,
    var comparison: Comparison
)

a = ['1', '2', '3']
ls = []
count = False

while ls != a :
    print(a[count])
    if a[count] != a[-1] :
        count = count + 1
    else :
        count = False

Restart while loop.

I like the approach and implemented it on server-side without doing any authentication related thing on front-end

My 'technique' on my latest app is.. the client doesn't care about Auth. Every single thing in the app requires a login first, so the server just always serves a login page unless an existing user is detected in the session. If session.user is found, the server just sends index.html. Bam :-o

Look for the comment by "Andrew Joslin".

https://groups.google.com/forum/?fromgroups=#!searchin/angular/authentication/angular/POXLTi_JUgg/VwStpoWCPUQJ

@Petr Mensik & kensen john

Thanks, I could not used the page directive because I have to set a different content type according to some URL parameter. I will paste my code here since it's something quite common with JSON:

    <%
        String callback = request.getParameter("callback");
        response.setCharacterEncoding("UTF-8");
        if (callback != null) {
            // Equivalent to: <@page contentType="text/javascript" pageEncoding="UTF-8">
            response.setContentType("text/javascript");
        } else {
            // Equivalent to: <@page contentType="application/json" pageEncoding="UTF-8">
            response.setContentType("application/json");
        }

        [...]

        String output = "";

        if (callback != null) {
            output += callback + "(";
        }

        output += jsonObj.toString();

        if (callback != null) {
            output += ");";
        }
    %>
    <%=output %>

When callback is supplied, returns:

    callback({...JSON stuff...});

with content-type "text/javascript"

When callback is NOT supplied, returns:

    {...JSON stuff...}

with content-type "application/json"

string mypath = @"..\folder1\folder2\folder2";
string[] directories = mypath.Split(Path.DirectorySeparatorChar);

Edit: This returns each individual folder in the directories array. You can get the number of folders returned like this:

int folderCount = directories.Length;

Just an idea, if you know the categories, as small, medium, and large mentioned above...

At the bottom of the sheet, make 3 rows that only say small, medium, and large, change the font to white, and then sort so that it alphabetizes, placing a blank row between each section.

SQL Server Management Studio 2008 R2 Express commandline:

The answer by dyslexicanaboko hits the crucial point, but this one is even simpler and suited for command line (unattended scenarios):

(tried out with SQL Server 2008 R2 Express, one instance installed and having downloaded SQLManagementStudio_x64_ENU.exe)

As pointed out in this thread often enough, it is better to use the original SQL server setup (e.g. SQL Express with Tools), if possible, but there are some scenarios, where you want to add SSMS at a SQL derivative without that tools, afterwards:

I´ve already put it in a batch syntax here:

@echo off
"%~dp0SQLManagementStudio_x64_ENU.exe" /Q /ACTION="Install" /FEATURES="SSMS" /IACCEPTSQLSERVERLICENSETERMS

Remarks:

1. For 2008 without R2 it should be enough to omit the /IACCEPTSQLSERVERLICENSETERMS flag, i guess.

2. The /INDICATEPROGRESS parameter is useless here, the whole command takes a number of minutes and is 100% silent without any acknowledgement. Just look at the start menu, if the command is ready, if it has succeeded.

3. This should work for the "ADV_SSMS" Feature (instead of "SSMS") too, which is the management studio extended variant (profiling, reporting, tuning, etc.)

1. Select cell B3 and click the Conditional Formatting button in the ribbon and choose "New Rule".
2. Select "Use a formula to determine which cells to format"
3. Enter the formula: =IF(B2="X",IF(B3="Y", TRUE, FALSE),FALSE), and choose to fill green when this is true
4. Create another rule and enter the formula =IF(B2="X",IF(B3="W", TRUE, FALSE),FALSE) and choose to fill red when this is true.

More details - conditional formatting with a formula applies the format when the formula evaluates to TRUE. You can use a compound IF formula to return true or false based on the values of any cells.

If []byte is ASCII byte numbers then first convert the []byte to string and use the strconv package Atoi method which convert string to int.

package main
import (
    "fmt"
    "strconv"
)

func main() {
    byteNumber := []byte("14")
    byteToInt, _ := strconv.Atoi(string(byteNumber))
    fmt.Println(byteToInt)
}

go playground - https://play.golang.org/p/gEzxva8-BGP

If you're using Python 3.4 or above, you can use statistics.mode()

>>> import statistics
>>> L = [1, 2, 45, 55, 5, 4, 4, 4, 4, 4, 4, 5456, 56, 6, 7, 67] 
>>> statistics.mode(L)
4

Note that this will throw a statistics.StatisticsError if the list is empty or if there is not exactly one most common value.

There is now a php artisan view:clear command for this task since Laravel 5.1

Another short way:

int[] myIntArray = Arrays.stream(myStringArray).mapToInt(Integer::parseInt).toArray();

The location of the sitemap affects which URLs that it can include, but otherwise there is no standard. Here is a good link with more explaination: http://www.sitemaps.org/protocol.html#location

As pointed out by others, define studentType outside the function. One more thing, even if you do that, do not create a local studentType instance inside the function. The instance is on the function stack and will not be available when you try to return it. One thing you can however do is create studentType dynamically and return the pointer to it outside the function.

I was facing the same issue for a couple of days then I figure out that the Oracle.DataAccess is available in the references list of the project, but in the bin folder is missing. So I removed it from the references list and readded again.

I get this problem in Eclipse sometimes when importing an Android project that does not have a .classpath file. The one that Eclipse creates is not exactly the same one that Android expects. But, the Android .classpath files are usually all relative, so I just copy a correct .classpath file from another project over the incorrect .classpath. I've created a video that shows how I do this: https://www.youtube.com/watch?v=IVIhgeahS1Ynto

I didn't see this idea in any of the answers so just adding it to the list. If it's a duplicate just let me know and i'll delete it and upvote the other.

I created a sort of super global in my website. Since I have several js files that are loaded on every page load and dozens of other js files that are only loaded on some pages I put all of the "global" function into a single global variable.

At the top of my first included "global" files is the declaration

var cgf = {}; // Custom global functions.

Then I delcare several global helper functions

cgf.formBehaviors = function()
{
    // My form behaviors that get attached in every page load.
}

Then if I need a static variable I just store it outside scope such as outside the document ready or outside the behavior attachment. (I use jquery but it should work in javascript)

cgf.first = true;
$.on('click', '.my-button', function()
{
    // Don't allow the user to press the submit twice.
    if (cgf.first)
    {
        // first time behavior. such as submit
    }
    cgf.first = false;
}

This of course is a global not a static but as it is reinitialized on every page load it accomplishes the same purpose.

Try this:

$('#foo').css({backgroundColor:'red', color:'white',fontSize:'44px'});

JSONObject jsonObj = new JSONObject(jsonString);

JSONArray jArray = jsonObj.getJSONArray("data");
int length = jArray.length();

   for(int i=0; i<length; i++)
      {
        JSONObject jObj = jArray.getJSONObject(i);
        String id = jObj.optString("id");
        String name=jObj.optString("name");

        JSONArray ingredientArray = jObj.getJSONArray("Ingredients");
        int size = ingredientArray.length();
        ArrayList<String> Ingredients = new ArrayList<>();

            for(int j=0; j<size; j++)
               {
                    JSONObject json = ja.getJSONObject(j);
                    Ingredients.add(json.optString("name"));
                }


       }

I have not seen any option in Microsoft SQL Server Management Studio 2012 to-date that will do that.

I am sure you can write something in T-SQL given the time.

Check out TOAD from QUEST - now owned by DELL.

http://www.toadworld.com/products/toad-for-oracle/f/10/t/9778.aspx

Select your rows.
Rt -click -> Export Dataset.
Choose Insert Statement format
Be sure to check “selected rows only”

Nice thing about toad, it works with both SQL server and Oracle. If you have to work with both, it is a good investment.

PDFClown might help, but I would not recommend it for a big or heavy use application.

1. C:\xampp\apache\conf\https.conf
Virtual hosts
Include conf/extra/httpd-vhosts.conf


2. C:\Windows\System32\drivers\etc\hosts
127.0.0.1       localhost
127.0.0.1       helpdesk.local


3. C:\xampp\apache\conf\extra\httpd-vhosts.conf
<VirtualHost *:80>
    DocumentRoot "C:/xampp/htdocs/helpdesk/public"
    ServerName helpdesk.local
</VirtualHost>


Now, Restart Apache and go through the link. 
URL : http://helpdesk.local

If you're running macOS like I am, you may not have the postgres user.

When trying to run sudo -u postgres psql I was getting the error sudo: unknown user: postgres

Luckily there are executables that postgres provides.

createuser -D /var/postgres/var-10-local --superuser --username=nick
createdb --owner=nick

Then I was able to access psql without issues.

psql
psql (10.2)
Type "help" for help.

nick=#

If you're creating a new postgres instance from scratch, here are the steps I took. I used a non-default port so I could run two instances.

mkdir /var/postgres/var-10-local
pg_ctl init -D /var/postgres/var-10-local

Then I edited /var/postgres/var-10-local/postgresql.conf with my preferred port, 5433.

/Applications/Postgres.app/Contents/Versions/10/bin/postgres -D /Users/nick/Library/Application\ Support/Postgres/var-10-local -p 5433

createuser -D /var/postgres/var-10-local --superuser --username=nick --port=5433
createdb --owner=nick --port=5433

Done!

Add the active: false option (documentation)..

$("#accordion").accordion({ header: "h3", collapsible: true, active: false });

To get the root view defined in your xml file, without action bar, you can use this:

View root = ((ViewGroup) findViewById(android.R.id.content)).getChildAt(0);

So, to change color to white:

root.setBackgroundResource(Color.WHITE);

You should be using a class for multiple elements as an id is meant to be only a single element. To answer your question on the .each() syntax though, this is what it would look like:

$('#myID').each(function() {
    $(this).remove();
});

Official JQuery documentation here.

I had the same problem and non of the given answers worked. But I found a git commit with a fix that did work for me:

sup {
  font-size: 0.8em;
  line-height: 0;
  position: relative;
  vertical-align: baseline;
  top: -0.5em;
}

The mysql_upgrade worked for me as well:

# mysql_upgrade -u root -p --force
# systemctl restart mysqld

Regards, MSz.

Express v4.17.0

app.use(express.urlencoded( {extended: true} ))

app.post('/userlogin', (req, res) => {    

   console.log(req.body) // object

   var email = req.body.email;

}

Demo Form

Another Answer Related

FOR SQL to drop a constraint

ALTER TABLE [dbo].[tablename] DROP CONSTRAINT [unique key created by sql] GO

alternatively: go to the keys -- right click on unique key and click on drop constraint in new sql editor window. The program writes the code for you.

Hope this helps. Avanish.

I was searching for a similar simple C++ config file parser and this tutorial website provided me with a basic yet working solution. Its quick and dirty soultion to get the job done.

myConfig.txt

gamma=2.8
mode  =  1
path = D:\Photoshop\Projects\Workspace\Images\

The following program reads the previous configuration file:

#include <iostream>
#include <fstream>
#include <algorithm>
#include <string>

int main()
{
    double gamma = 0;
    int mode = 0;
    std::string path;

    // std::ifstream is RAII, i.e. no need to call close
    std::ifstream cFile("myConfig.txt");
    if (cFile.is_open())
    {
        std::string line;
        while (getline(cFile, line)) 
        {
            line.erase(std::remove_if(line.begin(), line.end(), isspace),line.end());
            if (line[0] == '#' || line.empty()) continue;

            auto delimiterPos = line.find("=");
            auto name = line.substr(0, delimiterPos);
            auto value = line.substr(delimiterPos + 1);

            //Custom coding
            if (name == "gamma") gamma = std::stod(value);
            else if (name == "mode") mode = std::stoi(value);
            else if (name == "path") path = value;
        }
    }
    else 
    {
        std::cerr << "Couldn't open config file for reading.\n";
    }

    std::cout << "\nGamma=" << gamma;
    std::cout << "\nMode=" << mode;
    std::cout << "\nPath=" << path;
    std::getchar();
}

Once again the problem with unit-testing comes from manually creating objects using new operator. Consider passing already created Second instead:

class First {

  private Second second;

  public First(int num, Second second) {
    this.second = second;
    this.num = num;
  }

  // some other methods...
}

I know this might mean major rewrite of your API, but there is no other way. Also this class doesn't have any sense:

Mockito.when(new Second(any(String.class).thenReturn(null)));

First of all Mockito can only mock methods, not constructors. Secondly, even if you could mock constructor, you are mocking constructor of just created object and never really doing anything with that object.

EPOCH TIME DIFFERENCE USING MOMENTJS:

To Get Difference between two epoch times:

Syntax: moment.duration(moment(moment(date1).diff(moment(date2)))).asHours()

Difference in Hours: moment.duration(moment(moment(1590597744551).diff(moment(1590597909877)))).asHours()

Difference in minutes: moment.duration(moment(moment(1590597744551).diff(moment(1590597909877)))).asMinutes().toFixed()

Note: You could remove .toFixed() if you need precise values.

Code:

const moment = require('moment')

console.log('Date 1',moment(1590597909877).toISOString())
console.log('Date 2',moment(1590597744551).toISOString())
console.log('Date1 - Date 2 time diffrence is : ',moment.duration(moment(moment(1590597909877).diff(moment(1590597744551)))).asMinutes().toFixed()+' minutes')

Refer working example here: https://repl.it/repls/MoccasinDearDimension

This one didn't seem too bad.

http://mindprod.com/jgloss/jcheat.html

You can utilize ARGV:

v=123test
awk 'BEGIN {print ARGV[1]}' "$v"

Note that if you are going to continue into the body, you will need to adjust ARGC:

awk 'BEGIN {ARGC--} {print ARGV[2], $0}' file "$v"

I'm using the first approach but a bit different that allows to address the problems you mentioned.

Everything that is needed to run tests for DAOs is in source control. It includes schema and scripts to create the DB (docker is very good for this). If the embedded DB can be used - I use it for speed.

The important difference with the other described approaches is that the data that is required for test is not loaded from SQL scripts or XML files. Everything (except some dictionary data that is effectively constant) is created by application using utility functions/classes.

The main purpose is to make data used by test

1. very close to the test
2. explicit (using SQL files for data make it very problematic to see what piece of data is used by what test)
3. isolate tests from the unrelated changes.

It basically means that these utilities allow to declaratively specify only things essential for the test in test itself and omit irrelevant things.

To give some idea of what it means in practice, consider the test for some DAO which works with Comments to Posts written by Authors. In order to test CRUD operations for such DAO some data should be created in the DB. The test would look like:

@Test
public void savedCommentCanBeRead() {
    // Builder is needed to declaratively specify the entity with all attributes relevant
    // for this specific test
    // Missing attributes are generated with reasonable values
    // factory's responsibility is to create entity (and all entities required by it
    //  in our example Author) in the DB
    Post post = factory.create(PostBuilder.post());

    Comment comment = CommentBuilder.comment().forPost(post).build();

    sut.save(comment);

    Comment savedComment = sut.get(comment.getId());

    // this checks fields that are directly stored
    assertThat(saveComment, fieldwiseEqualTo(comment));
    // if there are some fields that are generated during save check them separately
    assertThat(saveComment.getGeneratedField(), equalTo(expectedValue));        
}

This has several advantages over SQL scripts or XML files with test data:

1. Maintaining the code is much easier (adding a mandatory column for example in some entity that is referenced in many tests, like Author, does not require to change lots of files/records but only a change in builder and/or factory)
2. The data required by specific test is described in the test itself and not in some other file. This proximity is very important for test comprehensibility.

Rollback vs Commit

I find it more convenient that tests do commit when they are executed. Firstly, some effects (for example DEFERRED CONSTRAINTS) cannot be checked if commit never happens. Secondly, when a test fails the data can be examined in the DB as it is not reverted by the rollback.

Of cause this has a downside that test may produce a broken data and this will lead to the failures in other tests. To deal with this I try to isolate the tests. In the example above every test may create new Author and all other entities are created related to it so collisions are rare. To deal with the remaining invariants that can be potentially broken but cannot be expressed as a DB level constraint I use some programmatic checks for erroneous conditions that may be run after every single test (and they are run in CI but usually switched off locally for performance reasons).

To get both stdout and stderr, I use:

Function GetProgramOutput([string]$exe, [string]$arguments)
{
    $process = New-Object -TypeName System.Diagnostics.Process
    $process.StartInfo.FileName = $exe
    $process.StartInfo.Arguments = $arguments

    $process.StartInfo.UseShellExecute = $false
    $process.StartInfo.RedirectStandardOutput = $true
    $process.StartInfo.RedirectStandardError = $true
    $process.Start()

    $output = $process.StandardOutput.ReadToEnd()   
    $err = $process.StandardError.ReadToEnd()

    $process.WaitForExit()

    $output
    $err
}

$exe = "cmd"
$arguments = '/c echo hello 1>&2'   #this writes 'hello' to stderr

$runResult = (GetProgramOutput $exe $arguments)
$stdout = $runResult[-2]
$stderr = $runResult[-1]

[System.Console]::WriteLine("Standard out: " + $stdout)
[System.Console]::WriteLine("Standard error: " + $stderr)

First of all don't use 'list' as variable name.

If you have simple dictionaries with unique keys then you can do the following(note that new dictionary object with all items from sub-dictionaries will be created):

res  = {}
for line in listOfDicts:
   res.update(line)
res['d']
>>> 4

Otherwise:

getValues = lambda key,inputData: [subVal[key] for subVal in inputData if key in subVal]
getValues('d', listOfDicts)
>>> [4]

Or very base:

def get_value(listOfDicts, key):
    for subVal in listOfDicts:
        if key in subVal:
            return subVal[key]

For the record, jQuery has an is() function for this:

a.is(b)

Note that a is already a jQuery instance.

There's also MSMQ (Microsoft Message Queueing) which can operate across networks as well as on a local computer. Although there are better ways to communicate it's worth looking into: https://msdn.microsoft.com/en-us/library/ms711472(v=vs.85).aspx

With new version of Lombok you can compile that cute class:

@Value(staticConstructor = "of") public class Pair <E> {
  E first, second;
}

and use it like: Pair<Value> pairOfValues = Pair.of(value1, value2);

First I would like to thank Rose who was willing to help us, but your answer could solve the problem on a computer, but in others there was what was done could not always connect gets error 720. After much searching and contact the Microsoft support we can solve. In Device Manager, on the View menu, select to show hidden devices. Made it look for a remote Miniport IP or network monitor that is with warning of problems with the driver icon. In its properties in the details tab check the Key property of the driver. Look for this key in Regedit on Local Machine, make a backup of that key and delete it. Restart your windows. Reopen your device manager and select the miniport that had deleted the record. Activate the option to update the driver and look for the option driver on the computer manually and then use the option to locate the driver from the list available on the computer on the next screen uncheck show compatible hardware. Then you must select the Microsoft Vendor and the driver WAN Miniport the type that is changing, IP or IPV6 L2TP Network Monitor. After upgrading restart the computer.

I know it's a bit laborious but that was the only way that worked on all computers.

SELECT id FROM TAG_TABLE WHERE 'aaaaaaaa' LIKE '%' || "tag_name" || '%';

tag_name should be in quotation otherwise it will give error as tag_name doest not exist

this works for me because it works fine in ie8.

$('#iframe').contents().find("html").html();

but if you like to use javascript aside for jquery you may use like this

var iframe = document.getElementById('iframecontent');
var innerDoc = iframe.contentDocument || iframe.contentWindow.document;
var val_1 = innerDoc.getElementById('value_1').value;

Remove the \bin, and also remove the ; at the end. After restart the cmd and run.

I wouldn't recommend implementing this as it is but hopefully this can inspire a good solution.

Let's say your enum is Foo. Then you can do something like this.

public class FooViewModel : ViewModel
{
    private int _fooValue;

    public int FooValue
    {
        get => _fooValue;
        set
        {
            _fooValue = value;
            OnPropertyChange();
            OnPropertyChange(nameof(Foo));
            OnPropertyChange(nameof(FooName));
        }
    }
    public Foo Foo 
    { 
        get => (Foo)FooValue; 
        set 
        { 
            _fooValue = (int)value;
            OnPropertyChange();
            OnPropertyChange(nameof(FooValue));
            OnPropertyChange(nameof(FooName));
        } 
    }
    public string FooName { get => Enum.GetName(typeof(Foo), Foo); }

    public FooViewModel(Foo foo)
    {
        Foo = foo;
    }
}

Then on Window.Load method you can load all enums to an ObservableCollection<FooViewModel> which you can set as the DataContext of the combobox.

Try,

myString!=null && myString.length()>0

If you are accessing your repositories over the SSH protocol, you will receive a warning message each time your client connects to a new IP address for github.com. As long as the IP address from the warning is in the range of IP addresses , you shouldn't be concerned. Specifically, the new addresses that are being added this time are in the range from 192.30.252.0 to 192.30.255.255. The warning message looks like this:

Warning: Permanently added the RSA host key for IP address '$IP' to the list of 

https://github.com/blog/1606-ip-address-changes

RTSP (actually RTP) can be used for streaming video, but also many other types of media including live presentations. Rtsp is just the protocol used to setup the RTP session.

For all the details you can check out my open source RTSP Server implementation on the following address: https://net7mma.codeplex.com/

Or my article @ http://www.codeproject.com/Articles/507218/Managed-Media-Aggregation-using-Rtsp-and-Rtp

It supports re-sourcing streams as well as the dynamic creation of streams, various RFC's are implemented and the library achieves better performance and less memory then FFMPEG and just about any other solutions in the transport layer and thus makes it a good candidate to use as a centralized point of access for most scenarios.

Given the security concerns about using the PGPASSWORD environment variable, I think the best overall solution is as follows:

1. Write your own temporary pgpass file with the password you want to use.
2. Use the PGPASSFILE environment variable to tell psql to use that file.
3. Remove the temporary pgpass file

There are a couple points of note here. Step 1 is there to avoid mucking with the user's ~/.pgpass file that might exist. You also must make sure that the file has permissions 0600 or less.

Some have suggested leveraging bash to shortcut this as follows:

PGPASSFILE=<(echo myserver:5432:mydb:jdoe:password) psql -h myserver -U jdoe -p 5432 mydb

This uses the <() syntax to avoid needing to write the data to an actual file. But it doesn't work because psql checks what file is being used and will throw an error like this:

WARNING: password file "/dev/fd/63" is not a plain file

The sort command prints the result of the sorting operation to standard output by default. In order to achieve an "in-place" sort, you can do this:

sort -o file file

This overwrites the input file with the sorted output. The -o switch, used to specify an output, is defined by POSIX, so should be available on all version of sort:

-o Specify the name of an output file to be used instead of the standard output. This file can be the same as one of the input files.

If you are unfortunate enough to have a version of sort without the -o switch (Luis assures me that they exist), you can achieve an "in-place" edit in the standard way:

sort file > tmp && mv tmp file

if you just want the number of occurences then you can do this, $ grep -c "string_to_count" file_name

After doing that don't forget to change your href in, <a href="{the chosen redirected name}"> home</a>

Example:

.htaccess file

RewriteEngine On

RewriteRule ^about/$ /about.php

PHP file:

<a href="about/"> about</a>

use test
go
alter proc restore_mdf_ldf_main (@database varchar(100), @mdf varchar(100),@ldf varchar(100),@filename varchar(200))
as
begin 
begin try
RESTORE DATABASE @database FROM DISK = @FileName
with norecovery,
MOVE @mdf TO 'D:\sql samples\sample.mdf',
MOVE @ldf TO 'D:\sql samples\sample.ldf'
end try
begin catch
SELECT ERROR_MESSAGE() AS ErrorMessage;
print 'Restoring of the database ' + @database + ' failed';
end catch
end

exec restore_mdf_ldf_main product,product,product_log,'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Backup\product.bak'

You can achieve this with the following code:

$("input").change(function(e) {

    for (var i = 0; i < e.originalEvent.srcElement.files.length; i++) {

        var file = e.originalEvent.srcElement.files[i];

        var img = document.createElement("img");
        var reader = new FileReader();
        reader.onloadend = function() {
             img.src = reader.result;
        }
        reader.readAsDataURL(file);
        $("input").after(img);
    }
});

Demo: http://jsfiddle.net/ugPDx/

Not sure what you meant, but you can permanently turn showing whitespaces on and off in Settings -> Editor -> General -> Appearance -> Show whitespaces.

Also, you can set it for a current file only in View -> Active Editor -> Show WhiteSpaces.

Edit:

Had some free time since it looks like a popular issue, I had written a plugin to inspect the code for such abnormalities. It is called Zero Width Characters locator and you're welcome to give it a try.

Your DOS command 2> nul

Read page Using command redirection operators. Besides the "2>" construct mentioned by Tanuki Software, it lists some other useful combinations.

foreach my $key (keys %$ad_grp_ref) {
    ...
}

Perl::Critic and daxim recommend the style

foreach my $key (keys %{ $ad_grp_ref }) {
    ...
}

out of concerns for readability and maintenance (so that you don't need to think hard about what to change when you need to use %{ $ad_grp_obj[3]->get_ref() } instead of %{ $ad_grp_ref })

If possible use Visual Studio. The Microsoft SQL Server Data Tools (SSDT) bring a built in functionality for this since the March 2014 release:

1. Open Visual Studio
2. Open "View" ? "SQL Server Object Explorer"
3. Add a connection to your Server
4. Expand the relevant database
5. Expand the "Tables" folder
6. Right click on relevant table
7. Select "View Data" from context menu
8. In the new window, viewing the data use the "Sort and filter dataset" functionality in the tool bar to apply your filter. Note that this functionality is limited and you can't write explicit SQL queries.
9. After you have applied your filter and see only the data you want, click on "Script" or "Script to file" in the tool bar
10. Voilà - Here you have your insert script for your filtered data

Note: Be careful, the "View Data" window is just like SSMS "Edit Top 200 Rows"- you can edit data right away

(Tested with Visual Studio 2015 with Microsoft SQL Server Data Tools (SSDT) Version 14.0.60812.0 and Microsoft SQL Server 2012)

Swift 4.2

let closure = { [weak self] (_ parameter:Int) in
    guard let self = self else { return }

    self.method(parameter)
}

https://github.com/apple/swift-evolution/blob/master/proposals/0079-upgrade-self-from-weak-to-strong.md

A simple and clean way: use np.argwhere to group the indices by element, rather than dimension as in np.nonzero(a) (i.e., np.argwhere returns a row for each non-zero element).

>>> a = np.arange(10)
>>> a
array([0, 1, 2, 3, 4, 5, 6, 7, 8, 9])
>>> np.argwhere(a>4)
array([[5],
       [6],
       [7],
       [8],
       [9]])

np.argwhere(a) is the same as np.transpose(np.nonzero(a)).

Note: You cannot use a(np.argwhere(a>4)) to get the corresponding values in a. The recommended way is to use a[(a>4).astype(bool)] or a[(a>4) != 0] rather than a[np.nonzero(a>4)] as they handle 0-d arrays correctly. See the documentation for more details. As can be seen in the following example, a[(a>4).astype(bool)] and a[(a>4) != 0] can be simplified to a[a>4].

Another example:

>>> a = np.array([5,-15,-8,-5,10])
>>> a
array([  5, -15,  -8,  -5,  10])
>>> a > 4
array([ True, False, False, False,  True])
>>> a[a > 4]
array([ 5, 10])
>>> a = np.add.outer(a,a)
>>> a
array([[ 10, -10,  -3,   0,  15],
       [-10, -30, -23, -20,  -5],
       [ -3, -23, -16, -13,   2],
       [  0, -20, -13, -10,   5],
       [ 15,  -5,   2,   5,  20]])
>>> a = np.argwhere(a>4)
>>> a
array([[0, 0],
       [0, 4],
       [3, 4],
       [4, 0],
       [4, 3],
       [4, 4]])
>>> [print(i,j) for i,j in a]
0 0
0 4
3 4
4 0
4 3
4 4

Use:

SELECT *
  FROM YOUR_TABLE
 WHERE creation_date <= TRUNC(SYSDATE) - 30

SYSDATE returns the date & time; TRUNC resets the date to being as of midnight so you can omit it if you want the creation_date that is 30 days previous including the current time.

Depending on your needs, you could also look at using ADD_MONTHS:

SELECT *
  FROM YOUR_TABLE
 WHERE creation_date <= ADD_MONTHS(TRUNC(SYSDATE), -1)

This is the easiest way to do this.

fin = open("a.txt")
f = open("file.txt", "wt")
for line in fin:
    f.write( line.replace('foo', 'bar') )
fin.close()
f.close()

I hope it will work for you.

Adding where to find UPDATE CURRENT_TIMESTAMP because for new people this is a confusion.

Most people will use phpmyadmin or something like it.

Default value you select CURRENT_TIMESTAMP

Attributes (a different drop down) you select UPDATE CURRENT_TIMESTAMP

You can see a complete example using java 8, recursion and streams -> Dijkstra algorithm with java

Remove both http and https setting by using commands.

git config --global --unset http.proxy

git config --global --unset https.proxy

Multiple Cookies,Multiple Claims

public class ClaimsCookie
    {
        private readonly ClaimsPrincipal _user;
        private readonly HttpContext _httpContext;
        public ClaimsCookie(ClaimsPrincipal user, HttpContext httpContext = null)
        {
            _user = user;
            _httpContext = httpContext;
        }

        public string GetValue(CookieName cookieName, KeyName keyName)
        {
            var principal = _user as ClaimsPrincipal;
            var cp = principal.Identities.First(i => i.AuthenticationType == ((CookieName)cookieName).ToString());
            return cp.FindFirst(((KeyName)keyName).ToString()).Value;
        }
        public async void SetValue(CookieName cookieName, KeyName[] keyName, string[] value)
        {
            if (keyName.Length != value.Length)
            {
                return;
            }
            var principal = _user as ClaimsPrincipal;
            var cp = principal.Identities.First(i => i.AuthenticationType == ((CookieName)cookieName).ToString());
            for (int i = 0; i < keyName.Length; i++)
            {
                if (cp.FindFirst(((KeyName)keyName[i]).ToString()) != null)
                {
                    cp.RemoveClaim(cp.FindFirst(((KeyName)keyName[i]).ToString()));
                    cp.AddClaim(new Claim(((KeyName)keyName[i]).ToString(), value[i]));
                }

            }
            await _httpContext.SignOutAsync(CookieName.UserProfilCookie.ToString());
            await _httpContext.SignInAsync(CookieName.UserProfilCookie.ToString(), new ClaimsPrincipal(cp),
                new AuthenticationProperties
                {
                    IsPersistent = bool.Parse(cp.FindFirst(KeyName.IsPersistent.ToString()).Value),
                    AllowRefresh = true
                });
        }
        public enum CookieName
        {
            CompanyUserProfilCookie = 0, UserProfilCookie = 1, AdminPanelCookie = 2
        }
        public enum KeyName
        {
            Id, Name, Surname, Image, IsPersistent
        }
    }

There is a wonderful library called Functional Java which handles many of the things you'd want Java to have but it doesn't. Then again, there's also this wonderful language Scala which does everything Java should have done but doesn't while still being compatible with anything written for the JVM.

I don't remember the URL from where I collected this. But hope this should help you:

CREATE TYPE table_count AS (table_name TEXT, num_rows INTEGER); 

CREATE OR REPLACE FUNCTION count_em_all () RETURNS SETOF table_count  AS '
DECLARE 
    the_count RECORD; 
    t_name RECORD; 
    r table_count%ROWTYPE; 

BEGIN
    FOR t_name IN 
        SELECT 
            c.relname
        FROM
            pg_catalog.pg_class c LEFT JOIN pg_namespace n ON n.oid = c.relnamespace
        WHERE 
            c.relkind = ''r''
            AND n.nspname = ''public'' 
        ORDER BY 1 
        LOOP
            FOR the_count IN EXECUTE ''SELECT COUNT(*) AS "count" FROM '' || t_name.relname 
            LOOP 
            END LOOP; 

            r.table_name := t_name.relname; 
            r.num_rows := the_count.count; 
            RETURN NEXT r; 
        END LOOP; 
        RETURN; 
END;
' LANGUAGE plpgsql; 

Executing select count_em_all(); should get you row count of all your tables.

The above linked list display in opposite direction. I think the correct implementation of insert method should be

public void insert(int d1, double d2) { 
    Link link = new Link(d1, d2); 

    if(first==null){
        link.nextLink = null;
        first = link; 
        last=link;
    }
    else{
        last.nextLink=link;
        link.nextLink=null;
        last=link;
    }
} 

version 4.0

$('#d').val('').trigger('change');

This is the correct solution from now on according to deprecated message thrown in debug mode: "The select2("val") method has been deprecated and will be removed in later Select2 versions. Use $element.val() instead"

You can do the following to learn/test the concept:

1. Open new Excel Workbook and in Excel VBA editor right-click on Modules->Insert->Module

2. In newly added Module1 add the declaration; Public Global1 As String

3. in Worksheet VBA Module Sheet1(Sheet1) put the code snippet:

Sub setMe()
      Global1 = "Hello"
End Sub

4. in Worksheet VBA Module Sheet2(Sheet2) put the code snippet:

Sub showMe()
    Debug.Print (Global1)
End Sub

5. Run in sequence Sub setMe() and then Sub showMe() to test the global visibility/accessibility of the var Global1

Hope this will help.

If you want to render HTML file you can use sendFile() method without using any template engine

const express =  require("express")
const path = require("path")
const app = express()
app.get("/",(req,res)=>{
    res.sendFile(**path.join(__dirname, 'htmlfiles\\index.html')**)
})
app.listen(8000,()=>{
    console.log("server is running at Port 8000");
})

I have an HTML file inside htmlfile so I used path module to render index.html path is default module in node. if your file is present in root folder just used

res.sendFile(path.join(__dirname, 'htmlfiles\\index.html'))

inside app.get() it will work

First, please check you have include eclipse gradle plugin. apply plugin : 'eclipse' Then go to your project directory in Terminal. Type gradle clean and then gradle eclipse. Then go to project in eclipse and refresh the project.

In MacOS Catalina 10.15.5 the .npmrc file path can be found at

/Users/<user-name>/.npmrc

Open in it in (for first time users, create a new file) any editor and copy-paste your token. Save it.

You are ready to go.

Note: As mentioned by @oligofren, the command npm config ls -l will npm configurations. You will get the .npmrc file from config parameter userconfig

Only providing .ttf file for webfont won't be good enough for cross-browser support. The best possible combination at present is using the combination as :

@font-face {
  font-family: 'MyWebFont';
  src: url('webfont.eot'); /* IE9 Compat Modes */
  src: url('webfont.eot?#iefix') format('embedded-opentype'), /* IE6-IE8 */
       url('webfont.woff') format('woff'), /* Modern Browsers */
       url('webfont.ttf')  format('truetype'), /* Safari, Android, iOS */
       url('webfont.svg#svgFontName') format('svg'); /* Legacy iOS */
}

This code assumes you have .eot , .woff , .ttf and svg format for you webfont. To automate all this process , you can use : Transfonter.org.

Also , modern browsers are shifting towards .woff font , so you can probably do this too : :

@font-face {
  font-family: 'MyWebFont';
  src: url('myfont.woff') format('woff'), /* Chrome 6+, Firefox 3.6+, IE 9+, Safari 5.1+ */
   url('myfont.ttf') format('truetype'); /* Chrome 4+, Firefox 3.5, Opera 10+, Safari 3—5 */
}  

Read more here : http://css-tricks.com/snippets/css/using-font-face/

Look for browser support : Can I Use fontface

You can try c#

public string ProcessMyDataItem(object myValue)
 {
  if (myValue == null)
   {
   return "0 %"";
  }
   else
  {
     if(Convert.ToInt32(myValue) < 50)
       return "0";
     else
      return myValue.ToString() + "%";
  }

 }

asp

 <div class="tooltip" style="display: none">                                                                  
      <div style="text-align: center; font-weight: normal">
   Value =<%# ProcessMyDataItem(Eval("Percentage")) %> </div>
 </div>

I sometimes print debugging output to the browser window. Using jQuery, you could send output messages to a display area on your page:

<div id='display'></div>

$('#display').text('array length: ' + myArray.length);

Or if you want to watch JavaScript variables without adding a display area to your page:

function debug(txt) {
    $('body').append("<div style='width:300px;background:orange;padding:3px;font-size:13px'>" + txt + "</div>");
}

You should put the print function in your view-details.php file and call it once the file is loaded, by either using

<body onload="window.print()"> 

or

$(document).ready(function () { 
  window.print(); 
});

As theon noted, REST is not a standard. However, if you are looking to implement a standards based URI convention, you might consider the oData URI convention. Ver 4 has been approved as an OASIS standard and libraries exists for oData for various languages including Java via Apache Olingo. Don't let the fact that it's a spawn from Microsoft put you off since it's gained support from other industry player's as well, which include Red Hat, Citrix, IBM, Blackberry, Drupal, Netflix Facebook and SAP

More adopters are listed here

But why stop with MessageBox-specific implementation? Use the class below like this:

    private void OnFormClosing(object sender, FormClosingEventArgs e)
    {
        DialogResult dg;
        using (DialogCenteringService centeringService = new DialogCenteringService(this)) // center message box
        {
            dg = MessageBox.Show(this, "Are you sure?", "Confirm exit", MessageBoxButtons.YesNo, MessageBoxIcon.Question);
        }

        if (dg == DialogResult.No)
        {
            e.Cancel = true;
        }
    }

The code that you can use with anything that shows dialog windows, even if they're owned by another thread (our app has multiple UI threads):

(Here is the updated code which takes monitor working areas into account, so that the dialog isn't centered between two monitors or is partly off-screen. With it you'll need enum SetWindowPosFlags, which is below)

public class DialogCenteringService : IDisposable
{
    private readonly IWin32Window owner;
    private readonly HookProc hookProc;
    private readonly IntPtr hHook = IntPtr.Zero;

    public DialogCenteringService(IWin32Window owner)
    {
        if (owner == null) throw new ArgumentNullException("owner");

        this.owner = owner;
        hookProc = DialogHookProc;

        hHook = SetWindowsHookEx(WH_CALLWNDPROCRET, hookProc, IntPtr.Zero, GetCurrentThreadId());
    }

    private IntPtr DialogHookProc(int nCode, IntPtr wParam, IntPtr lParam)
    {
        if (nCode < 0)
        {
            return CallNextHookEx(hHook, nCode, wParam, lParam);
        }

        CWPRETSTRUCT msg = (CWPRETSTRUCT)Marshal.PtrToStructure(lParam, typeof(CWPRETSTRUCT));
        IntPtr hook = hHook;

        if (msg.message == (int)CbtHookAction.HCBT_ACTIVATE)
        {
            try
            {
                CenterWindow(msg.hwnd);
            }
            finally
            {
                UnhookWindowsHookEx(hHook);
            }
        }

        return CallNextHookEx(hook, nCode, wParam, lParam);
    }

    public void Dispose()
    {
        UnhookWindowsHookEx(hHook);
    }

    private void CenterWindow(IntPtr hChildWnd)
    {
        Rectangle recChild = new Rectangle(0, 0, 0, 0);
        bool success = GetWindowRect(hChildWnd, ref recChild);

        if (!success)
        {
            return;
        }

        int width = recChild.Width - recChild.X;
        int height = recChild.Height - recChild.Y;

        Rectangle recParent = new Rectangle(0, 0, 0, 0);
        success = GetWindowRect(owner.Handle, ref recParent);

        if (!success)
        {
            return;
        }

        Point ptCenter = new Point(0, 0);
        ptCenter.X = recParent.X + ((recParent.Width - recParent.X) / 2);
        ptCenter.Y = recParent.Y + ((recParent.Height - recParent.Y) / 2);


        Point ptStart = new Point(0, 0);
        ptStart.X = (ptCenter.X - (width / 2));
        ptStart.Y = (ptCenter.Y - (height / 2));

        //MoveWindow(hChildWnd, ptStart.X, ptStart.Y, width, height, false);
        Task.Factory.StartNew(() => SetWindowPos(hChildWnd, (IntPtr)0, ptStart.X, ptStart.Y, width, height, SetWindowPosFlags.SWP_ASYNCWINDOWPOS | SetWindowPosFlags.SWP_NOSIZE | SetWindowPosFlags.SWP_NOACTIVATE | SetWindowPosFlags.SWP_NOOWNERZORDER | SetWindowPosFlags.SWP_NOZORDER));
    }

    // some p/invoke

    // ReSharper disable InconsistentNaming
    public delegate IntPtr HookProc(int nCode, IntPtr wParam, IntPtr lParam);

    public delegate void TimerProc(IntPtr hWnd, uint uMsg, UIntPtr nIDEvent, uint dwTime);

    private const int WH_CALLWNDPROCRET = 12;

    // ReSharper disable EnumUnderlyingTypeIsInt
    private enum CbtHookAction : int
    // ReSharper restore EnumUnderlyingTypeIsInt
    {
        // ReSharper disable UnusedMember.Local
        HCBT_MOVESIZE = 0,
        HCBT_MINMAX = 1,
        HCBT_QS = 2,
        HCBT_CREATEWND = 3,
        HCBT_DESTROYWND = 4,
        HCBT_ACTIVATE = 5,
        HCBT_CLICKSKIPPED = 6,
        HCBT_KEYSKIPPED = 7,
        HCBT_SYSCOMMAND = 8,
        HCBT_SETFOCUS = 9
        // ReSharper restore UnusedMember.Local
    }

    [DllImport("kernel32.dll")]
    static extern int GetCurrentThreadId();

    [DllImport("user32.dll")]
    private static extern bool GetWindowRect(IntPtr hWnd, ref Rectangle lpRect);

    [DllImport("user32.dll")]
    private static extern int MoveWindow(IntPtr hWnd, int X, int Y, int nWidth, int nHeight, bool bRepaint);

    [DllImport("user32.dll")]
    [return: MarshalAs(UnmanagedType.Bool)]
    private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int x, int y, int cx, int cy, SetWindowPosFlags uFlags);

    [DllImport("User32.dll")]
    public static extern UIntPtr SetTimer(IntPtr hWnd, UIntPtr nIDEvent, uint uElapse, TimerProc lpTimerFunc);

    [DllImport("User32.dll")]
    public static extern IntPtr SendMessage(IntPtr hWnd, int Msg, IntPtr wParam, IntPtr lParam);

    [DllImport("user32.dll")]
    public static extern IntPtr SetWindowsHookEx(int idHook, HookProc lpfn, IntPtr hInstance, int threadId);

    [DllImport("user32.dll")]
    public static extern int UnhookWindowsHookEx(IntPtr idHook);

    [DllImport("user32.dll")]
    public static extern IntPtr CallNextHookEx(IntPtr idHook, int nCode, IntPtr wParam, IntPtr lParam);

    [DllImport("user32.dll")]
    public static extern int GetWindowTextLength(IntPtr hWnd);

    [DllImport("user32.dll")]
    public static extern int GetWindowText(IntPtr hWnd, StringBuilder text, int maxLength);

    [DllImport("user32.dll")]
    public static extern int EndDialog(IntPtr hDlg, IntPtr nResult);

    [StructLayout(LayoutKind.Sequential)]
    public struct CWPRETSTRUCT
    {
        public IntPtr lResult;
        public IntPtr lParam;
        public IntPtr wParam;
        public uint message;
        public IntPtr hwnd;
    };
    // ReSharper restore InconsistentNaming
}

[Flags]
public enum SetWindowPosFlags : uint
{
    // ReSharper disable InconsistentNaming

    /// <summary>
    ///     If the calling thread and the thread that owns the window are attached to different input queues, the system posts the request to the thread that owns the window. This prevents the calling thread from blocking its execution while other threads process the request.
    /// </summary>
    SWP_ASYNCWINDOWPOS = 0x4000,

    /// <summary>
    ///     Prevents generation of the WM_SYNCPAINT message.
    /// </summary>
    SWP_DEFERERASE = 0x2000,

    /// <summary>
    ///     Draws a frame (defined in the window's class description) around the window.
    /// </summary>
    SWP_DRAWFRAME = 0x0020,

    /// <summary>
    ///     Applies new frame styles set using the SetWindowLong function. Sends a WM_NCCALCSIZE message to the window, even if the window's size is not being changed. If this flag is not specified, WM_NCCALCSIZE is sent only when the window's size is being changed.
    /// </summary>
    SWP_FRAMECHANGED = 0x0020,

    /// <summary>
    ///     Hides the window.
    /// </summary>
    SWP_HIDEWINDOW = 0x0080,

    /// <summary>
    ///     Does not activate the window. If this flag is not set, the window is activated and moved to the top of either the topmost or non-topmost group (depending on the setting of the hWndInsertAfter parameter).
    /// </summary>
    SWP_NOACTIVATE = 0x0010,

    /// <summary>
    ///     Discards the entire contents of the client area. If this flag is not specified, the valid contents of the client area are saved and copied back into the client area after the window is sized or repositioned.
    /// </summary>
    SWP_NOCOPYBITS = 0x0100,

    /// <summary>
    ///     Retains the current position (ignores X and Y parameters).
    /// </summary>
    SWP_NOMOVE = 0x0002,

    /// <summary>
    ///     Does not change the owner window's position in the Z order.
    /// </summary>
    SWP_NOOWNERZORDER = 0x0200,

    /// <summary>
    ///     Does not redraw changes. If this flag is set, no repainting of any kind occurs. This applies to the client area, the nonclient area (including the title bar and scroll bars), and any part of the parent window uncovered as a result of the window being moved. When this flag is set, the application must explicitly invalidate or redraw any parts of the window and parent window that need redrawing.
    /// </summary>
    SWP_NOREDRAW = 0x0008,

    /// <summary>
    ///     Same as the SWP_NOOWNERZORDER flag.
    /// </summary>
    SWP_NOREPOSITION = 0x0200,

    /// <summary>
    ///     Prevents the window from receiving the WM_WINDOWPOSCHANGING message.
    /// </summary>
    SWP_NOSENDCHANGING = 0x0400,

    /// <summary>
    ///     Retains the current size (ignores the cx and cy parameters).
    /// </summary>
    SWP_NOSIZE = 0x0001,

    /// <summary>
    ///     Retains the current Z order (ignores the hWndInsertAfter parameter).
    /// </summary>
    SWP_NOZORDER = 0x0004,

    /// <summary>
    ///     Displays the window.
    /// </summary>
    SWP_SHOWWINDOW = 0x0040,

    // ReSharper restore InconsistentNaming
}

You can use Manifests from jcabi-manifests and read any attribute from any of available MANIFEST.MF files with just one line:

String value = Manifests.read("My-Attribute");

The only dependency you need is:

<dependency>
  <groupId>com.jcabi</groupId>
  <artifactId>jcabi-manifests</artifactId>
  <version>0.7.5</version>
</dependency>

Also, see this blog post for more details: http://www.yegor256.com/2014/07/03/how-to-read-manifest-mf.html

Since version 1.3.0 AngularJS introduced extra filter parameter timezone, like following:

{{ date_expression | date : format : timezone}}

But in versions 1.3.x only supported timezone is UTC, which can be used as following:

{{ someDate | date: 'MMM d, y H:mm:ss' : 'UTC' }}

Since version 1.4.0-rc.0 AngularJS supports other timezones too. I was not testing all possible timezones, but here's for example how you can get date in Japan Standard Time (JSP, GMT +9):

{{ clock | date: 'MMM d, y H:mm:ss' : '+0900' }}

Here you can find documentation of AngularJS date filters.

NOTE: this is working only with Angular 1.x

Here's working example

What about this? I never found this patter around but I was just trying to exclude one or more properties without the need of creating an extra object. This seems to do the job but there are some side effects I'm not able to see. For sure is not very readable.

const postData = {
   token: 'secret-token',
   publicKey: 'public is safe',
   somethingElse: true,
};

const a = {
   ...(({token, ...rest} = postData) => (rest))(),
}

/**
a: {
   publicKey: 'public is safe',
   somethingElse: true,
}
*/

This worked for me.

sed -e 's/\s\+/,/g' input.txt >> output.csv

Yes, you need to have the header Access-Control-Allow-Origin: http://domain.com:3000 or Access-Control-Allow-Origin: * on both the OPTIONS response and the POST response. You should include the header Access-Control-Allow-Credentials: true on the POST response as well.

Your OPTIONS response should also include the header Access-Control-Allow-Headers: origin, content-type, accept to match the requested header.

For java after 1.7

 List<String> lines = Files.readAllLines(Paths.get(getClass().getResource("test.csv").toURI()));

Have you tried:

tr.classname { margin-bottom:5em; }

Alternatively, each td can be adjusted as well:

td.classname { margin-bottom:5em; }

or

 td.classname { padding-bottom:5em; }

Try something like this - it works for the cases you have mentioned.

select * from tbl
where answer like '%[0-9]%'
and answer not like '%[:]%'
and answer not like '%[A-Z]%'

There's talk about interoperability between C and Go when using the gcc Go compiler, gccgo. There are limitations both to the interoperability and the implemented feature set of Go when using gccgo, however (e.g., limited goroutines, no garbage collection).

$("#id").change(function(){
    //does some stuff;
});

There's actually quite a bit of useful information added to debug allocations. This table is more complete:

http://www.nobugs.org/developer/win32/debug_crt_heap.html#table

Address  Offset After HeapAlloc() After malloc() During free() After HeapFree() Comments
0x00320FD8  -40    0x01090009    0x01090009     0x01090009    0x0109005A     Win32 heap info
0x00320FDC  -36    0x01090009    0x00180700     0x01090009    0x00180400     Win32 heap info
0x00320FE0  -32    0xBAADF00D    0x00320798     0xDDDDDDDD    0x00320448     Ptr to next CRT heap block (allocated earlier in time)
0x00320FE4  -28    0xBAADF00D    0x00000000     0xDDDDDDDD    0x00320448     Ptr to prev CRT heap block (allocated later in time)
0x00320FE8  -24    0xBAADF00D    0x00000000     0xDDDDDDDD    0xFEEEFEEE     Filename of malloc() call
0x00320FEC  -20    0xBAADF00D    0x00000000     0xDDDDDDDD    0xFEEEFEEE     Line number of malloc() call
0x00320FF0  -16    0xBAADF00D    0x00000008     0xDDDDDDDD    0xFEEEFEEE     Number of bytes to malloc()
0x00320FF4  -12    0xBAADF00D    0x00000001     0xDDDDDDDD    0xFEEEFEEE     Type (0=Freed, 1=Normal, 2=CRT use, etc)
0x00320FF8  -8     0xBAADF00D    0x00000031     0xDDDDDDDD    0xFEEEFEEE     Request #, increases from 0
0x00320FFC  -4     0xBAADF00D    0xFDFDFDFD     0xDDDDDDDD    0xFEEEFEEE     No mans land
0x00321000  +0     0xBAADF00D    0xCDCDCDCD     0xDDDDDDDD    0xFEEEFEEE     The 8 bytes you wanted
0x00321004  +4     0xBAADF00D    0xCDCDCDCD     0xDDDDDDDD    0xFEEEFEEE     The 8 bytes you wanted
0x00321008  +8     0xBAADF00D    0xFDFDFDFD     0xDDDDDDDD    0xFEEEFEEE     No mans land
0x0032100C  +12    0xBAADF00D    0xBAADF00D     0xDDDDDDDD    0xFEEEFEEE     Win32 heap allocations are rounded up to 16 bytes
0x00321010  +16    0xABABABAB    0xABABABAB     0xABABABAB    0xFEEEFEEE     Win32 heap bookkeeping
0x00321014  +20    0xABABABAB    0xABABABAB     0xABABABAB    0xFEEEFEEE     Win32 heap bookkeeping
0x00321018  +24    0x00000010    0x00000010     0x00000010    0xFEEEFEEE     Win32 heap bookkeeping
0x0032101C  +28    0x00000000    0x00000000     0x00000000    0xFEEEFEEE     Win32 heap bookkeeping
0x00321020  +32    0x00090051    0x00090051     0x00090051    0xFEEEFEEE     Win32 heap bookkeeping
0x00321024  +36    0xFEEE0400    0xFEEE0400     0xFEEE0400    0xFEEEFEEE     Win32 heap bookkeeping
0x00321028  +40    0x00320400    0x00320400     0x00320400    0xFEEEFEEE     Win32 heap bookkeeping
0x0032102C  +44    0x00320400    0x00320400     0x00320400    0xFEEEFEEE     Win32 heap bookkeeping

As I recall, the only portable way to do it, is to cast the result to "unsigned long int" and use %lu.

printf("sizeof(int) = %lu", (unsigned long) sizeof(int));

Because one moderator deleted my detailed image-supported answer on this question, just because I copied and pasted from another question, I am forced to put a less detailed answer and I will link the original answer if you want a more visual way to see the solution.

For Visual Studio 2019 and Visual Studio 2017 Users
For People who are missing this old feature in VS2019 (or maybe VS2017) from the old versions of Visual Studio

This feature still available, but it is NOT available by default, you have to install it separately.

1. Open VS 2019 go to Tools -> Get Tools and Features
2. Select the Individual components tab and search for Class Designer
3. Select this Component and Install it, After finish installing this component (you may need to restart visual studio)
4. Right-click on the project and select Add -> Add New Item
5. Search for 'class' word and NOW you can see Class Diagram component

see this answer also to see an image associated

https://stackoverflow.com/a/66289543/4390133

(whish that the moderator realized this is the same question and instead of deleting my answer, he could mark one of the questions as duplicated to the other)

Update to create a class-diagram for the whole project
I received a downvote because I did not mention how to generate a diagram for the whole project, here is how to do it (after applying the previous steps)

1. Add class diagram to the project
2. if the option Preview Selected Items is enabled in the solution explorer, disabled it temporarily, you can re-enable it later

3. open the class diagram that you created in step 2 (by double-clicking on it)
4. drag-and-drop the project from the solution explorer to the class diagram

you could be shocked by the results to the point that you can change your mind and remove your downvote (please do NOT upvote, it is enough to remove your downvote)

There are a few different ways to do this but following is a quick sample of one way.

<img src="yourimage.jpg" style="float:right" /><div style="clear:both">Your text here.</div>

I used inline styles for this sample but you can easily place these in a stylesheet and reference the class or id.

Yes it has, you can do it like this:

var str = "  this is the answer   "
str = str.trimmingCharacters(in: CharacterSet.whitespacesAndNewlines)
print(srt) // "this is the answer"

CharacterSet is actually a really powerful tool to create a trim rule with much more flexibility than a pre defined set like .whitespacesAndNewlines has.

For Example:

var str = " Hello World !"
let cs = CharacterSet.init(charactersIn: " !")
str = str.trimmingCharacters(in: cs)
print(str) // "Hello World"

The solution from brettdj works fantastically, but if you are coming across this as a potential solution for the same reason I was, I thought that I would offer my alternative solution.

The problem I was having was scrolling to a specific column based on the output of a MATCH() function. Instead of converting the column number to its column letter parallel, I chose to temporarily toggle the reference style from A1 to R1C1. This way I could just scroll to the column number without having to muck with a VBA function. To easily toggle between the two reference styles, you can use this VBA code:

Sub toggle_reference_style()

If Application.ReferenceStyle = xlR1C1 Then
  Application.ReferenceStyle = xlA1
Else
  Application.ReferenceStyle = xlR1C1
End If

End Sub

First you need to get the counts for each category, i.e. how many Bads and Goods and so on are there for each group (Food, Music, People). This would be done like so:

raw <- read.csv("http://pastebin.com/raw.php?i=L8cEKcxS",sep=",")
raw[,2]<-factor(raw[,2],levels=c("Very Bad","Bad","Good","Very Good"),ordered=FALSE)
raw[,3]<-factor(raw[,3],levels=c("Very Bad","Bad","Good","Very Good"),ordered=FALSE)
raw[,4]<-factor(raw[,4],levels=c("Very Bad","Bad","Good","Very Good"),ordered=FALSE)

raw=raw[,c(2,3,4)] # getting rid of the "people" variable as I see no use for it

freq=table(col(raw), as.matrix(raw)) # get the counts of each factor level

Then you need to create a data frame out of it, melt it and plot it:

Names=c("Food","Music","People")     # create list of names
data=data.frame(cbind(freq),Names)   # combine them into a data frame
data=data[,c(5,3,1,2,4)]             # sort columns

# melt the data frame for plotting
data.m <- melt(data, id.vars='Names')

# plot everything
ggplot(data.m, aes(Names, value)) +   
  geom_bar(aes(fill = variable), position = "dodge", stat="identity")

Is this what you're after?

To clarify a little bit, in ggplot multiple grouping bar you had a data frame that looked like this:

> head(df)
  ID Type Annee X1PCE X2PCE X3PCE X4PCE X5PCE X6PCE
1  1    A  1980   450   338   154    36    13     9
2  2    A  2000   288   407   212    54    16    23
3  3    A  2020   196   434   246    68    19    36
4  4    B  1980   111   326   441    90    21    11
5  5    B  2000    63   298   443   133    42    21
6  6    B  2020    36   257   462   162    55    30

Since you have numerical values in columns 4-9, which would later be plotted on the y axis, this can be easily transformed with reshape and plotted.

For our current data set, we needed something similar, so we used freq=table(col(raw), as.matrix(raw)) to get this:

> data
   Names Very.Bad Bad Good Very.Good
1   Food        7   6    5         2
2  Music        5   5    7         3
3 People        6   3    7         4

Just imagine you have Very.Bad, Bad, Good and so on instead of X1PCE, X2PCE, X3PCE. See the similarity? But we needed to create such structure first. Hence the freq=table(col(raw), as.matrix(raw)).

In Angular 2 this is how we can set the default value for radio button:

HTML:

<label class="form-check-label">
          <input type="radio" class="form-check-input" name="gender" 
          [(ngModel)]="gender" id="optionsRadios1" value="male">
          Male
</label>

In the Component Class set the value of 'gender' variable equal to the value of radio button:

gender = 'male';

double a = 100.3;
printf("%f %d\n", a, (int)(a* 10.0));

Output Cygwin 100.3 1003
Output MinGW: 100.3 1002

Using (int) to convert double to int seems not to be fail-safe

You can find more about that here: Convert double to int?

2's complement of a given number is the no. got by adding 1 with the 1's complement of the no. suppose, we have a binary no.: 10111001101 It's 1's complement is : 01000110010 And it's 2's complement will be : 01000110011

In light of apparent dislike for how I've attempted to answer the OP's question. The literal answer is, a promise is something shared w/ other objects, while a deferred should be kept private. Primarily, a deferred (which generally extends Promise) can resolve itself, while a promise might not be able to do so.

If you're interested in the minutiae, then examine Promises/A+.

So far as I'm aware, the overarching purpose is to improve clarity and loosen coupling through a standardized interface. See suggested reading from @jfriend00:

Rather than directly passing callbacks to functions, something which can lead to tightly coupled interfaces, using promises allows one to separate concerns for code that is synchronous or asynchronous.

Personally, I've found deferred especially useful when dealing with e.g. templates that are populated by asynchronous requests, loading scripts that have networks of dependencies, and providing user feedback to form data in a non-blocking manner.

Indeed, compare the pure callback form of doing something after loading CodeMirror in JS mode asynchronously (apologies, I've not used jQuery in a while):

/* assume getScript has signature like: function (path, callback, context) 
   and listens to onload && onreadystatechange */
$(function () {
   getScript('path/to/CodeMirror', getJSMode);

   // onreadystate is not reliable for callback args.
   function getJSMode() {
       getScript('path/to/CodeMirror/mode/javascript/javascript.js', 
           ourAwesomeScript);
   };

   function ourAwesomeScript() {
       console.log("CodeMirror is awesome, but I'm too impatient.");
   };
});

To the promises formulated version (again, apologies, I'm not up to date on jQuery):

/* Assume getScript returns a promise object */
$(function () {
   $.when(
       getScript('path/to/CodeMirror'),
       getScript('path/to/CodeMirror/mode/javascript/javascript.js')
   ).then(function () {
       console.log("CodeMirror is awesome, but I'm too impatient.");
   });
});

Apologies for the semi-pseudo code, but I hope it makes the core idea somewhat clear. Basically, by returning a standardized promise, you can pass the promise around, thus allowing for more clear grouping.

In PHP 5.6.x version You should do the following:

Move to Windows\system32 folder DLLs from php folder:

libssh2.dll, ssleay32.dll, libeay32.dll and php_curl.dll from php ext folder

Move to Apache24\bin folder from php folder:

libssh2.dll

Also, don't forget to uncomment extension=php_curl.dll in php.ini

To answer the title of your question directly because this comes up in Google first:

YES, TypeScript can export a function!

Here is a direct quote from the TS Documentation:

"Any declaration (such as a variable, function, class, type alias, or interface) can be exported by adding the export keyword."

Reference Link

I have recently used google mobile vision in both ios and android. I highly recommend to use Google Barcode Scan. It is pretty responsive with any orientation and processing time is pretty fast. It is called Google Mobile Vision.

The Barcode Scanner API detects barcodes in real time in any orientation. You can also detect and parse several barcodes in different formats at the same time.

https://developers.google.com/vision/

https://codelabs.developers.google.com/codelabs/bar-codes/#0

There is now a much easier way to setup Git password caching by double clicking a small exe on Windows. The program is still based on git-credential-winstore mentioned by the top voted answer, although the project has been moved from GitHub to http://gitcredentialstore.codeplex.com/

You can download the exe (and a binary for Mac) from this blog post: https://github.com/blog/1104-credential-caching-for-wrist-friendly-git-usage

Assuming you did not commit the file, or add it to the index, then:

git checkout -- filename

Assuming you added it to the index, but did not commit it, then:

git reset HEAD filename
git checkout -- filename

Assuming you did commit it, then:

git checkout origin/master filename

Assuming you want to blow away all commits from your branch (VERY DESTRUCTIVE):

git reset --hard origin/master

Wooo I just got it ! It was a mix of a lot of already posted answers (innoDB, unsigned, etc). One thing I didn't see here though is : if your FK is pointing on a PK, ensure the source column has a value that makes sense. For example, if the PK is a mediumint(8), make sure the source column also contains a mediumint(8). That was part of the problem for me.

Yes that's possible you have to define your own style for radio buttons, at res/values/styles.xml:

<?xml version="1.0" encoding="utf-8"?>
<resources>
<style name="CustomTheme" parent="android:Theme">
   <item name="android:radioButtonStyle">@style/RadioButton</item>
</style>
<style name="RadioButton" parent="@android:style/Widget.CompoundButton.RadioButton">
   <item name="android:button">@drawable/radio</item>
</style>
</resources>

'radio' here should be a stateful drawable, radio.xml:

    <?xml version="1.0" encoding="utf-8"?>
    <selector xmlns:android="http://schemas.android.com/apk/res/android">
    <item android:state_checked="true" android:state_window_focused="false"
        android:drawable="@drawable/radio_hover" />
    <item android:state_checked="false" android:state_window_focused="false"
        android:drawable="@drawable/radio_normal" />
    <item android:state_checked="true" android:state_pressed="true"
        android:drawable="@drawable/radio_active" />
    <item android:state_checked="false" android:state_pressed="true"
        android:drawable="@drawable/radio_active" />
    <item android:state_checked="true" android:state_focused="true"
        android:drawable="@drawable/radio_hover" />
    <item android:state_checked="false" android:state_focused="true"
        android:drawable="@drawable/radio_normal_off" />
    <item android:state_checked="false" android:drawable="@drawable/radio_normal" />
    <item android:state_checked="true" android:drawable="@drawable/radio_hover" />
    </selector>

Then just apply the Custom theme either to whole app or to activities of your choice.

For more info about themes and styles look at http://brainflush.wordpress.com/2009/03/15/understanding-android-themes-and-styles/ that is good guide.

It might also be worth mentioning that inline will try to open Office Documents (xls, doc etc) directly from the server, which might lead to a User Credentials Prompt.

see this link:

http://forums.asp.net/t/1885657.aspx/1?Access+the+SSRS+Report+in+excel+format+on+server

somebody tried to deliver an Excel Report from SSRS via ASP.Net -> the user always got prompted to enter the credentials. After clicking cancel on the prompt it would be opened anyway...

If the Content Disposition is marked as Attachment it will automatically be saved to the temp folder after clicking open and then opened in Excel from the local copy.

A closure implementation for Java 5, 6, and 7

http://mseifed.blogspot.se/2012/09/bringing-closures-to-java-5-6-and-7.html

It contains all one could ask for...

Iterative development implies revisiting usual waterfall model steps over the course of product lifetime. The stages can even overlap, i.e. while doing end-to-end testing you could already start preparing new requirements.

Incremental development means you roadmap your features and implement them incrementally.

Agile aims at creating "potentially shippable product" after every sprint. How you achieve it is a different story. Agile tries to employ "best" techniques from various fields (e.g. extreme programming). Agile does not exclude running neither incremental nor iterative development.

InitialValue="0" : initial validation will fire when 0th index item is selected in ddl.

<asp:RequiredFieldValidator InitialValue="0" Display="Dynamic" CssClass="error" runat="server" ID="your_id" ValidationGroup="validationgroup" ControlToValidate="your_dropdownlist_id" />

cvc-elt.1: Cannot find the declaration of element 'Root'. [7]

Your schemaLocation attribute on the root element should be xsi:schemaLocation, and you need to fix it to use the right namespace.

You should probably change the targetNamespace of the schema and the xmlns of the document to http://myNameSpace.com (since namespaces are supposed to be valid URIs, which Test.Namespace isn't, though urn:Test.Namespace would be ok). Once you do that it should find the schema. The point is that all three of the schema's target namespace, the document's namespace, and the namespace for which you're giving the schema location must be the same.

(though it still won't validate as your <element2> contains an <element3> in the document where the schema expects item)

My Bots are running well against ReCaptcha.

Here my Solution.

Let your Bot do this Steps:

First write a Human Mouse Move Function to move your Mouse like a B-Spline (Ask me for Source Code). This is the most important Point.

Also use for better results a VPN like https://www.purevpn.com

For every Recpatcha do these Steps:

1. If you use VPN switch IP first

2. Clear all Browser Cookies

3. Clear all Browser Cache

4. Set one of these Useragents by Random:

   a. Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Trident/5.0)

   b. Mozilla/5.0 (Windows NT 6.1; WOW64; rv:44.0) Gecko/20100101 Firefox/44.0

5 Move your Mouse with the Human Mouse Move Funktion from a RandomPoint into the I am not a Robot Image every time with different 10x10 Randomrange

6. Then Click ever with random delay between

   WM_LBUTTONDOWN

   and

   WM_LBUTTONUP

7. Take Screenshot from Image Captcha

8. Send Screenshot to

   http://www.deathbycaptcha.com

   or

   https://2captcha.com

and let they solve.

9. After receiving click cooridinates from captcha solver use your Human Mouse move Funktion to move and Click Recaptcha Images

10. Use your Human Mouse Move Funktion to move and Click to the Recaptcha Verify Button

In 75% all trys Recaptcha will solved

Chears Google

Tom

This happened to me after upgrading from angular 1.6 -> 1.7 when using $sce.trustAsResourceUrl() as the return value of a function called from ng-src. You can see this issue mentioned here.

In my case I had to change the following.

<source ng-src="{{trustSrc(someUrl)}}" type='video/mp4' />
trustSrc = function(url){
    return $sce.trustAsResourceUrl(url);
};

to

<source ng-src='{{trustedUrl}} type='video/mp4' />
trustedUrl = $sce.trustAsResourceUrl(someUrl);

In addition to the beautiful solution given by @Jon Skeet, I also needed ThenBy and ThenByDescending, so I am adding it based on his solution:

    public static IOrderedEnumerable<TSource> ThenByWithDirection<TSource, TKey>(
         this IOrderedEnumerable<TSource> source, 
         Func<TSource, TKey> keySelector,  
         bool descending)
    {
        return descending ? 
               source.ThenByDescending(keySelector) :
               source.ThenBy(keySelector);
    }

You may take a look at intellij code folding shortcuts.

For Windows/Linux do: Ctrl+Shift+-

For mac use Command+Shift+-

To unfold again do Ctrl+Shift++ or Command+Shift++ respectivley.

swift 4 & iOS 12

var audioPlayer: AVAudioPlayer?

override func viewDidLoad() {
    super.viewDidLoad()



}

@IBAction func notePressed(_ sender: UIButton) {

    // noise while pressing button

    _ = Bundle.main.path(forResource: "note1", ofType: "wav")

    if Bundle.main.path(forResource: "note1", ofType: "wav") != nil {
        print("Continue processing")
    } else {
        print("Error: No file with specified name exists")
    }

    do {
        if let fileURL = Bundle.main.path(forResource: "note1", ofType: "wav") {
            audioPlayer = try AVAudioPlayer(contentsOf: URL(fileURLWithPath: fileURL))
        } else {
            print("No file with specified name exists")
        }
    } catch let error {
        print("Can't play the audio file failed with an error \(error.localizedDescription)")
    }


    audioPlayer?.play()    }

}

Try this...

SELECT
    AlarmEventTransactionTableTable.TxnID,
    CASE
        WHEN DeviceID IN('7', '10', '62', '58', '60',
                 '46', '48', '50', '137', '139',
                 '142', '143', '164') THEN '01'
        WHEN DeviceID IN('8', '9', '63', '59', '61',
                 '47', '49', '51', '138', '140',
                 '141', '144', '165') THEN '02'
        ELSE 'NA' END AS clocking,
    AlarmEventTransactionTable.DateTimeOfTxn
 FROM
    multiMAXTxn.dbo.AlarmEventTransactionTable

Just remove highlighted string

SELECT AlarmEventTransactionTableTable.TxnID, CASE AlarmEventTransactions.DeviceID WHEN DeviceID IN('7', '10', '62', '58', '60', ...)

And for completeness (primarily educational), it is possible without using the len() function. I would not condone this as a good option DO NOT PROGRAM LIKE THIS IN PYTHON, but it serves a purpose for learning algorithms.

def count(list):
    item_count = 0
    for item in list[:]:
        item_count += 1
    return item_count

count([1,2,3,4,5])

(The colon in list[:] is implicit and is therefore also optional.)

The lesson here for new programmers is: You can’t get the number of items in a list without counting them at some point. The question becomes: when is a good time to count them? For example, high-performance code like the connect system call for sockets (written in C) connect(int sockfd, const struct sockaddr *addr, socklen_t addrlen);, does not calculate the length of elements (giving that responsibility to the calling code). Notice that the length of the address is passed along to save the step of counting the length first? Another option: computationally, it might make sense to keep track of the number of items as you add them within the object that you pass. Mind that this takes up more space in memory. See Naftuli Kay‘s answer.

Example of keeping track of the length to improve performance while taking up more space in memory. Note that I never use the len() function because the length is tracked:

class MyList(object):
    def __init__(self):
        self._data = []
        self.length = 0 # length tracker that takes up memory but makes length op O(1) time


        # the implicit iterator in a list class
    def __iter__(self):
        for elem in self._data:
            yield elem

    def add(self, elem):
        self._data.append(elem)
        self.length += 1

    def remove(self, elem):
        self._data.remove(elem)
        self.length -= 1

mylist = MyList()
mylist.add(1)
mylist.add(2)
mylist.add(3)
print(mylist.length) # 3
mylist.remove(3)
print(mylist.length) # 2

You could try this. It doesn't read all of f into memory at once (using the file object's iterator) and it closes the file when the code leaves the with block.

if data.find('!masters') != -1:
    with open('masters.txt', 'r') as f:
        for line in f:
            print line
            sck.send('PRIVMSG ' + chan + " " + line + '\r\n')

If you're using an older version of python (pre 2.6) you'll have to have

from __future__ import with_statement

void abc(void *a, int b) {
  char *format[] = {"%d", "%c", "%f"};
  printf(format[b-1], a);
}

Try this

String[] array = values.split("\\|",-1); 

The VARCHAR datatype is synonymous with the VARCHAR2 datatype. To avoid possible changes in behavior, always use the VARCHAR2 datatype to store variable-length character strings.

If your database runs on a single-byte character set (e.g. US7ASCII, WE8MSWIN1252 or WE8ISO8859P1) it does not make any difference whether you use VARCHAR2(x BYTE) or VARCHAR2(x CHAR).

It makes only a difference when your DB runs on multi-byte character set (e.g. AL32UTF8 or AL16UTF16). You can simply see it in this example:

CREATE TABLE my_table (
    VARCHAR2_byte VARCHAR2(1 BYTE), 
    VARCHAR2_char VARCHAR2(1 CHAR)
);

INSERT INTO my_table (VARCHAR2_char) VALUES ('€');
1 row created.

INSERT INTO my_table (VARCHAR2_char) VALUES ('ü');
1 row created.

INSERT INTO my_table (VARCHAR2_byte) VALUES ('€');
INSERT INTO my_table (VARCHAR2_byte) VALUES ('€')
Error at line 10
ORA-12899: value too large for column "MY_TABLE"."VARCHAR2_BYTE" (actual: 3, maximum: 1)

INSERT INTO my_table (VARCHAR2_byte) VALUES ('ü')
Error at line 11
ORA-12899: value too large for column "MY_TABLE"."VARCHAR2_BYTE" (actual: 2, maximum: 1)

VARCHAR2(1 CHAR) means you can store up to 1 character, no matter how many byte it has. In case of Unicode one character may occupy up to 4 bytes.

VARCHAR2(1 BYTE) means you can store a character which occupies max. 1 byte.

If you don't specify either BYTE or CHAR then the default is taken from NLS_LENGTH_SEMANTICS session parameter.

Unless you have Oracle 12c where you can set MAX_STRING_SIZE=EXTENDED the limit is VARCHAR2(4000 CHAR)

However, VARCHAR2(4000 CHAR) does not mean you are guaranteed to store up to 4000 characters. The limit is still 4000 bytes, so in worst case you may store only up to 1000 characters in such field.

See this example (€ in UTF-8 occupies 3 bytes):

CREATE TABLE my_table2(VARCHAR2_char VARCHAR2(4000 CHAR));

BEGIN
    INSERT INTO my_table2 VALUES ('€€€€€€€€€€');
    FOR i IN 1..7 LOOP
        UPDATE my_table2 SET VARCHAR2_char = VARCHAR2_char ||VARCHAR2_char;
    END LOOP;
END;
/

SELECT LENGTHB(VARCHAR2_char) , LENGTHC(VARCHAR2_char) FROM my_table2;

LENGTHB(VARCHAR2_CHAR) LENGTHC(VARCHAR2_CHAR)
---------------------- ----------------------
                  3840                   1280
1 row selected.


UPDATE my_table2 SET VARCHAR2_char = VARCHAR2_char ||VARCHAR2_char;

UPDATE my_table2 SET VARCHAR2_char = VARCHAR2_char ||VARCHAR2_char
Error at line 1
ORA-01489: result of string concatenation is too long

See also Examples and limits of BYTE and CHAR semantics usage (NLS_LENGTH_SEMANTICS) (Doc ID 144808.1)

My take to describe this in a more accessible way...

In order to understand what Apache Camel is, you need to understand what Enterprise Integration Patterns are.

Let's start with what we presumably already know: The Singleton pattern, the Factory pattern, etc; They are merely ways of organizing your solution to the problem, but they are not solutions themselves. These patterns were analyzed and extracted for the rest of us by the Gang of Four, when they published their book: Design Patterns. They saved some of us tremendous effort in thinking of how to best structure our code.

Much like the Gang of Four, Gregor Hohpe and Bobby Woolf authored the book Enterprise Integration Patterns (EIP) in which they propose and document a set of new patterns and blueprints for how we could best design large component-based systems, where components can be running on the same process or in a different machine.

They basically propose that we structure our system to be message oriented -- where components communicate with each others using messages as inputs and outputs and absolutely nothing else. They show us a complete set of patterns that we may choose from and implement in our different components that will together form the whole system.

So what is Apache Camel?

Apache Camel offers you the interfaces for the EIPs, the base objects, commonly needed implementations, debugging tools, a configuration system, and many other helpers which will save you a ton of time when you want to implement your solution to follow the EIPs.

Take MVC. MVC is pretty simple in theory and we could implement it without any framework help. But good MVC frameworks provide us with the structure ready-to-use and have gone the extra mile and thought out all the other "side" things you need when you create a large MVC project and that's why we use them most of the time.

That's exactly what Apache Camel is for EIPs. It's a complete production-ready framework for people who want to implement their solution to follow the EIPs.

The Maven profile and the Spring profile are two completely different things. Your pom.xml defines spring.profiles.active variable which is available in the build process, but not at runtime. That is why only the default profile is activated.

How to bind Maven profile with Spring?

You need to pass the build variable to your application so that it is available when it is started.

1. Define a placeholder in your application.properties:

   [email protected]@
   

   The @spring.profiles.active@ variable must match the declared property from the Maven profile.

2. Enable resource filtering in you pom.xml:

   <build>
       <resources>
           <resource>
               <directory>src/main/resources</directory>
               <filtering>true</filtering>
           </resource>
       </resources>
       …
   </build>
   

   When the build is executed, all files in the src/main/resources directory will be processed by Maven and the placeholder in your application.properties will be replaced with the variable you defined in your Maven profile.

For more details you can go to my post where I described this use case.

In a scenario where you intend to push a single email to different recipients at one instance (i.e CC multiple email addresses), the solution below works fine with Laravel 5.4 and above.

Mail::to('[email protected]')
    ->cc(['[email protected]','[email protected]','[email protected]','[email protected]'])
    ->send(new document());

where document is any class that further customizes your email.

Bootstrap Modal Events:

1. hide.bs.modal => Occurs when the modal is about to be hidden.
2. hidden.bs.modal => Occurs when the modal is fully hidden (after CSS transitions have completed).

<script type="text/javascript">
    $("#salesitems_modal").on('hide.bs.modal', function () {
        //actions you want to perform after modal is closed.
    });
</script>

I hope this will Help.

I had a very similar issue and I'm not quite sure what you're having a problem with, as your suggested code worked great for me. It immediately (a requirement of yours) triggers the following change code.

$('#selectField').change(function(){
    if($('#selectField').val() == 'N'){
        $('#secondaryInput').hide();
    } else {
        $('#secondaryInput').show();
}
});

Then I take the value from the database (this is used on a form for both new input and editing existing records), set it as the selected value, and add the piece I was missing to trigger the above code, ".change()".

$('#selectField').val(valueFromDatabase).change();

So that if the existing value from the database is 'N', it immediately hides the secondary input field in my form.

PowerShell Fun

Get-WmiObject win32_logicaldisk -Computername <ServerName> -Credential $(get-credential) | Select DeviceID,VolumeName,FreeSpace,Size | where {$_.DeviceID -eq "C:"}

You are just adding a header which server does not allow.

eg - your server is set up CORS to allow these headers only (accept,cache-control,pragma,content-type,origin)

and in your http request you are adding like this

 headers: {
        'Authorization': 'Basic d2VudHdvcnRobWFuOkNoYW5nZV9tZQ==',
        'Accept': 'application/json',
        'x-testing': 'testingValue'
    }

then the Server will reject this request since (Authorization and x-testing) are not allowed.

This is server side configuration.

And there is nothing to do with HTTP Options, it is just a preflight to server which is from different domain to check if server will allow actual call or not.

byte[] toByteArray(int value) {
     return  ByteBuffer.allocate(4).putInt(value).array();
}

byte[] toByteArray(int value) {
    return new byte[] { 
        (byte)(value >> 24),
        (byte)(value >> 16),
        (byte)(value >> 8),
        (byte)value };
}

int fromByteArray(byte[] bytes) {
     return ByteBuffer.wrap(bytes).getInt();
}
// packing an array of 4 bytes to an int, big endian, minimal parentheses
// operator precedence: <<, &, | 
// when operators of equal precedence (here bitwise OR) appear in the same expression, they are evaluated from left to right
int fromByteArray(byte[] bytes) {
     return bytes[0] << 24 | (bytes[1] & 0xFF) << 16 | (bytes[2] & 0xFF) << 8 | (bytes[3] & 0xFF);
}

// packing an array of 4 bytes to an int, big endian, clean code
int fromByteArray(byte[] bytes) {
     return ((bytes[0] & 0xFF) << 24) | 
            ((bytes[1] & 0xFF) << 16) | 
            ((bytes[2] & 0xFF) << 8 ) | 
            ((bytes[3] & 0xFF) << 0 );
}

When packing signed bytes into an int, each byte needs to be masked off because it is sign-extended to 32 bits (rather than zero-extended) due to the arithmetic promotion rule (described in JLS, Conversions and Promotions).

There's an interesting puzzle related to this described in Java Puzzlers ("A Big Delight in Every Byte") by Joshua Bloch and Neal Gafter . When comparing a byte value to an int value, the byte is sign-extended to an int and then this value is compared to the other int

byte[] bytes = (…)
if (bytes[0] == 0xFF) {
   // dead code, bytes[0] is in the range [-128,127] and thus never equal to 255
}

Note that all numeric types are signed in Java with exception to char being a 16-bit unsigned integer type.

And if you want to create the list with some elements to start with:

var emailList = new List<EmailData>
{
   new EmailData { FirstName = "John", LastName = "Doe", Location = "Moscow" },
   new EmailData {.......}
};

Use purrr::has_element to check against the value of a list element:

> x <- list(c(1, 2), c(3, 4))
> purrr::has_element(x, c(3, 4))
[1] TRUE
> purrr::has_element(x, c(3, 5))
[1] FALSE

instead of

listItems.add("New Item");
adapter.notifyDataSetChanged();

you can directly call

adapter.add("New Item");

Why don't you want to remove the multiple attribute? The entire purpose of that attribute is to specify to the browser that multiple values may be selected from the given select element. If only a single value should be selected, remove the attribute and the browser will know to allow only a single selection.

Use the tools you have, that's what they're for.

Here's one way: You basically re-write your sort function to take a list of sort functions, each sort function compares the attributes you want to test, on each sort test, you look and see if the cmp function returns a non-zero return if so break and send the return value. You call it by calling a Lambda of a function of a list of Lambdas.

Its advantage is that it does single pass through the data not a sort of a previous sort as other methods do. Another thing is that it sorts in place, whereas sorted seems to make a copy.

I used it to write a rank function, that ranks a list of classes where each object is in a group and has a score function, but you can add any list of attributes. Note the un-lambda-like, though hackish use of a lambda to call a setter. The rank part won't work for an array of lists, but the sort will.

#First, here's  a pure list version
my_sortLambdaLst = [lambda x,y:cmp(x[0], y[0]), lambda x,y:cmp(x[1], y[1])]
def multi_attribute_sort(x,y):
    r = 0
    for l in my_sortLambdaLst:
        r = l(x,y)
        if r!=0: return r #keep looping till you see a difference
    return r

Lst = [(4, 2.0), (4, 0.01), (4, 0.9), (4, 0.999),(4, 0.2), (1, 2.0), (1, 0.01), (1, 0.9), (1, 0.999), (1, 0.2) ]
Lst.sort(lambda x,y:multi_attribute_sort(x,y)) #The Lambda of the Lambda
for rec in Lst: print str(rec)

Here's a way to rank a list of objects

class probe:
    def __init__(self, group, score):
        self.group = group
        self.score = score
        self.rank =-1
    def set_rank(self, r):
        self.rank = r
    def __str__(self):
        return '\t'.join([str(self.group), str(self.score), str(self.rank)]) 


def RankLst(inLst, group_lambda= lambda x:x.group, sortLambdaLst = [lambda x,y:cmp(x.group, y.group), lambda x,y:cmp(x.score, y.score)], SetRank_Lambda = lambda x, rank:x.set_rank(rank)):
    #Inner function is the only way (I could think of) to pass the sortLambdaLst into a sort function
    def multi_attribute_sort(x,y):
        r = 0
        for l in sortLambdaLst:
            r = l(x,y)
            if r!=0: return r #keep looping till you see a difference
        return r

    inLst.sort(lambda x,y:multi_attribute_sort(x,y))
    #Now Rank your probes
    rank = 0
    last_group = group_lambda(inLst[0])
    for i in range(len(inLst)):
        rec = inLst[i]
        group = group_lambda(rec)
        if last_group == group: 
            rank+=1
        else:
            rank=1
            last_group = group
        SetRank_Lambda(inLst[i], rank) #This is pure evil!! The lambda purists are gnashing their teeth

Lst = [probe(4, 2.0), probe(4, 0.01), probe(4, 0.9), probe(4, 0.999), probe(4, 0.2), probe(1, 2.0), probe(1, 0.01), probe(1, 0.9), probe(1, 0.999), probe(1, 0.2) ]

RankLst(Lst, group_lambda= lambda x:x.group, sortLambdaLst = [lambda x,y:cmp(x.group, y.group), lambda x,y:cmp(x.score, y.score)], SetRank_Lambda = lambda x, rank:x.set_rank(rank))
print '\t'.join(['group', 'score', 'rank']) 
for r in Lst: print r

Use two dimensional array instead. For instance, int values[][] = new int[2][5]; Arrays are faster, when you are not manipulating much.

Try:

 #!/bin/bash
 if [ "$#" -eq  "0" ]
   then
     echo "No arguments supplied"
 else
     echo "Hello world"
 fi

Private Sub CommandButton1_Click()

    Dim Data As Object, Employee As Object

    Application.ScreenUpdating = False

    Set Data = ThisWorkbook.Sheets("Data")

    Set Employee = ThisWorkbook.Sheets("Employee Names")

    Data.Range("AK1").Value = "Lookup"

    Data.Range("AK2:AK" & Data.Range("A1").End(xlDown).Row).Formula = "=VLOOKUP(E2,'Employee Names'!$A:$A,1,0)"

    Data.Range("AK2:AK" & Data.Range("A1").End(xlDown).Row).Value = Data.Range("AK2:AK" & Data.Range("A1").End(xlDown).Row).Value

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=5, Criteria1:="<>"

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=37, Criteria1:="#N/A"

    Application.DisplayAlerts = False

    Data.AutoFilter.Range.Offset(1, 0).Rows.SpecialCells(xlCellTypeVisible).Delete (xlShiftUp)

    Data.Range("AK:AK").Delete

    Data.AutoFilterMode = False

    'Selection.AutoFilter

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=7, Criteria1:="="

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=12, Criteria1:="<>"

    Worksheets("Data").Range("A1:AK" & Data.Range("A1").End(xlDown).Row).Copy

    Sheets.Add(After:=Sheets(Sheets.Count)).Name = "DrfeeRequested"

    Set Dr = ThisWorkbook.Worksheets("DrfeeRequested")

    Dr.Range("A1").PasteSpecial Paste:=xlPasteValues

    Application.CutCopyMode = False

    Data.AutoFilterMode = False

    'DrfeeRequested.AutoFilterMode = False

    Selection.AutoFilter

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=13, Criteria1:="<>"

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).Copy

    Sheets.Add(After:=Sheets(Sheets.Count)).Name = "RateLockfollowup"
    Set Ratefolup = ThisWorkbook.Worksheets("RateLockfollowup")

    Ratefolup.Range("A1").PasteSpecial Paste:=xlPasteValues

    Application.CutCopyMode = False

    Data.AutoFilterMode = False

    Selection.AutoFilter

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=19, Criteria1:="="

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=13, Criteria1:="<>"

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).Copy

    Sheets.Add(After:=Sheets(Sheets.Count)).Name = "Lockedlefollowup"
    Set Lockfolup = ThisWorkbook.Worksheets("Lockedlefollowup")

    Lockfolup.Range("A1").PasteSpecial Paste:=xlPasteValues

    Application.CutCopyMode = False

    Data.AutoFilterMode = False

    Selection.AutoFilter

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=19, Criteria1:="="

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).Copy

    Sheets.Add(After:=Sheets(Sheets.Count)).Name = "Hoifollowup"

    Set Hoifolup = ThisWorkbook.Worksheets("Hoifollowup")

    Hoifolup.Range("A1").PasteSpecial Paste:=xlPasteValues

    Application.CutCopyMode = False

    Data.AutoFilterMode = False

    Selection.AutoFilter

    TodayDT = Format(Now())

    Weekdy = Weekday(Now())

    If Weekdy = 2 Then
       LastTwoDays = Now() - Weekday(Now(), 3)
    ElseIf Weekdy = 3 Then
       LastTwoDays = Now() - Weekday(Now(), 3)
    ElseIf Weekdy = 4 Then
       LastTwoDays = Now() - Weekday(Now(), 3)
    ElseIf Weekdy = 5 Then
       LastTwoDays = Now() - Weekday(Now(), 3)
    ElseIf Weekdy = 6 Then
       LastTwoDays = Now() - Weekday(Now(), 3)
    Else
       MsgBox "Today Satuarday OR Sunday Data is not Available"
    End If

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=12, Criteria1:="="

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=11, Criteria1:="<>"

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=11, Criteria1:=" TodayDT", Operator:=xlAnd, Criteria2:="LastTwoDays"

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).Copy

    Sheets.Add(After:=Sheets(Sheets.Count)).Name = "DRfeefollowup"

    Set Drfreefolup = ThisWorkbook.Worksheets("DRfeefollowup")

    Drfreefolup.Range("A1").PasteSpecial Paste:=xlPasteValues

    Application.CutCopyMode = False

    Data.AutoFilterMode = False

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=15, Criteria1:="yes"

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=19, Criteria1:="x"

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=12, Criteria1:="<>"

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=13, Criteria1:="<>"

    'Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).AutoFilter Field:=14, criterial:="<>"

    Data.Range("A1:AK" & Data.Range("A1").End(xlDown).Row).Copy

    Sheets.Add(After:=Sheets(Sheets.Count)).Name = "Drworkblefiles"

    Set Drworkblefiles = ThisWorkbook.Worksheets("Drworkblefiles")

    Drworkblefiles.Range("A1").PasteSpecial Paste:=xlPasteValues

    Application.CutCopyMode = False

    Data.Range("A1").AutoFilter

   End Sub

 Private Sub CommandButton2_Click()


    Sheets("Data").Range("A1:AJ" & Sheets("Data").Range("A1").End(xlDown).Row).Clear

    MsgBox "Please paste new data in data sheet"


End Sub