From comments:
But, this code never stops (because of integer overflow) !?! Yves Daoust
For many numbers it will not overflow.
If it will overflow - for one of those unlucky initial seeds, the overflown number will very likely converge toward 1 without another overflow.
Still this poses interesting question, is there some overflow-cyclic seed number?
Any simple final converging series starts with power of two value (obvious enough?).
2^64 will overflow to zero, which is undefined infinite loop according to algorithm (ends only with 1), but the most optimal solution in answer will finish due to shr rax
producing ZF=1.
Can we produce 2^64? If the starting number is 0x5555555555555555
, it's odd number, next number is then 3n+1, which is 0xFFFFFFFFFFFFFFFF + 1
= 0
. Theoretically in undefined state of algorithm, but the optimized answer of johnfound will recover by exiting on ZF=1. The cmp rax,1
of Peter Cordes will end in infinite loop (QED variant 1, "cheapo" through undefined 0
number).
How about some more complex number, which will create cycle without 0
?
Frankly, I'm not sure, my Math theory is too hazy to get any serious idea, how to deal with it in serious way. But intuitively I would say the series will converge to 1 for every number : 0 < number, as the 3n+1 formula will slowly turn every non-2 prime factor of original number (or intermediate) into some power of 2, sooner or later. So we don't need to worry about infinite loop for original series, only overflow can hamper us.
So I just put few numbers into sheet and took a look on 8 bit truncated numbers.
There are three values overflowing to 0
: 227
, 170
and 85
(85
going directly to 0
, other two progressing toward 85
).
But there's no value creating cyclic overflow seed.
Funnily enough I did a check, which is the first number to suffer from 8 bit truncation, and already 27
is affected! It does reach value 9232
in proper non-truncated series (first truncated value is 322
in 12th step), and the maximum value reached for any of the 2-255 input numbers in non-truncated way is 13120
(for the 255
itself), maximum number of steps to converge to 1
is about 128
(+-2, not sure if "1" is to count, etc...).
Interestingly enough (for me) the number 9232
is maximum for many other source numbers, what's so special about it? :-O 9232
= 0x2410
... hmmm.. no idea.
Unfortunately I can't get any deep grasp of this series, why does it converge and what are the implications of truncating them to k bits, but with cmp number,1
terminating condition it's certainly possible to put the algorithm into infinite loop with particular input value ending as 0
after truncation.
But the value 27
overflowing for 8 bit case is sort of alerting, this looks like if you count the number of steps to reach value 1
, you will get wrong result for majority of numbers from the total k-bit set of integers. For the 8 bit integers the 146 numbers out of 256 have affected series by truncation (some of them may still hit the correct number of steps by accident maybe, I'm too lazy to check).
When you perform a boolean comparison between two vectors in R, the "expectation" is that both vectors are of the same length, so that R can compare each corresponding element in turn.
R has a much loved (or hated) feature called recycling, whereby in many circumstances if you try to do something where R would normally expect objects to be of the same length, it will automatically extend, or recycle, the shorter object to force both objects to be of the same length.
If the longer object is a multiple of the shorter, this amounts to simply repeating the shorter object several times. Oftentimes R programmers will take advantage of this to do things more compactly and with less typing.
But if they are not multiples, R will worry that you may have made a mistake, and perhaps didn't mean to perform that comparison, hence the warning.
Explore yourself with the following code:
> x <- 1:3
> y <- c(1,2,4)
> x == y
[1] TRUE TRUE FALSE
> y1 <- c(y,y)
> x == y1
[1] TRUE TRUE FALSE TRUE TRUE FALSE
> y2 <- c(y,2)
> x == y2
[1] TRUE TRUE FALSE FALSE
Warning message:
In x == y2 :
longer object length is not a multiple of shorter object length
They serve the actual image inside CSS so there will be less HTTP requests per page.
This is how the regex look like:
import re
# "semicolon or (a comma followed by a space)"
pattern = re.compile(r";|, ")
# "(semicolon or a comma) followed by a space"
pattern = re.compile(r"[;,] ")
print pattern.split(text)
As others said, class variables are shared between a given class and its subclasses. Class instance variables belong to exactly one class; its subclasses are separate.
Why does this behavior exist? Well, everything in Ruby is an object—even classes. That means that each class has an object of the class Class
(or rather, a subclass of Class
) corresponding to it. (When you say class Foo
, you're really declaring a constant Foo
and assigning a class object to it.) And every Ruby object can have instance variables, so class objects can have instance variables, too.
The trouble is, instance variables on class objects don't really behave the way you usually want class variables to behave. You usually want a class variable defined in a superclass to be shared with its subclasses, but that's not how instance variables work—the subclass has its own class object, and that class object has its own instance variables. So they introduced separate class variables with the behavior you're more likely to want.
In other words, class instance variables are sort of an accident of Ruby's design. You probably shouldn't use them unless you specifically know they're what you're looking for.
To deal with situations where there are a possibility of multiple values (v in your example), I use PIVOT
and LISTAGG
:
SELECT * FROM
(
SELECT id, k, v
FROM _kv
)
PIVOT
(
LISTAGG(v ,',')
WITHIN GROUP (ORDER BY k)
FOR k IN ('name', 'age','gender','status')
)
ORDER BY id;
Since you want dynamic values, use dynamic SQL and pass in the values determined by running a select on the table data before calling the pivot statement.
what led me to this page is that I set within a page then the inside of an included page I did the increment
and here is the problem
so to solve such a problem, simply use scope="request"
when you declare the variable or the increment
//when you set the variale add scope="request"
<c:set var="nFilters" value="${0}" scope="request"/>
//the increment, it can be happened inside an included page
<c:set var="nFilters" value="${nFilters + 1}" scope="request" />
hope this saves your time
For getting the IP Camera video link:
IP
and PORT
in browserAnother way of getting the results
SELECT * from table WHERE SUBSTRING(tester, 1, 8) <> 'username' or tester is null
I recommend that before executing SaveAs, delete the file it exists.
If Dir("f:ull\path\with\filename.xls") <> "" Then
Kill "f:ull\path\with\filename.xls"
End If
It's easier than setting DisplayAlerts off and on, plus if DisplayAlerts remains off due to code crash, it can cause problems if you work with Excel in the same session.
Mutable objects can have their fields changed after construction. Immutable objects cannot.
public class MutableClass {
private int value;
public MutableClass(int aValue) {
value = aValue;
}
public void setValue(int aValue) {
value = aValue;
}
public getValue() {
return value;
}
}
public class ImmutableClass {
private final int value;
// changed the constructor to say Immutable instead of mutable
public ImmutableClass (final int aValue) {
//The value is set. Now, and forever.
value = aValue;
}
public final getValue() {
return value;
}
}
I know this thread has been idle for a while, but I just wanted to add my two cents to supplement jariq's comment...
Per manual, you don't necessary want to use -password
option.
Let's say mykey.key
has a password and your want to protect iphone-dev.p12
with another password, this is what you'd use:
pkcs12 -export -inkey mykey.key -in developer_identity.pem -out iphone_dev.p12 -passin pass:password_for_mykey -passout pass:password_for_iphone_dev
Have fun scripting!!
@larowlan great sample code. With the new GitHub API V3, the curl statement needs to be updated. Also, the login is no longer required:
curl https://api.github.com/repos/$2/$3 2> /dev/null | grep size | tr -dc '[:digit:]'
For example:
curl https://api.github.com/repos/dotnet/roslyn 2> /dev/null | grep size | tr -dc '[:digit:]'
returns 931668
(in KB), which is almost a GB.
Try this..Add this in your page
<style>
textarea
{
width:100%;
}
</style>
First I don't want to start a war..
I haven't used TextMate but I have used its Windows equivalent, e-TextEditor and I could understand why people love it.
I've also tried many text editors and IDEs in my quest in finding the perfect text editor on Linux. I've tried jEdit, vim, emacs (although I used to love when I was at uni) and various others.
On Linux I've settled with gEdit. Although I do use Komodo Edit from time to time. When I'm in a hurry I use gEdit purely because it is quicker than Komodo Edit. gEdit has plenty of plugins and comes with some nice colour schemes. I reckon once gEdit has a proper code-tidy facility it'll be cool. I think the only reason I use Komodo Edit is the project file facility.
I have a friend who donated his 'Vi Improved' book in the hope that he can convert me to Vim. The book is over an inch thick and completely put me off in investing time in learning Vim..
Everytime I find an editor - I always find myself going back to gEdit. It is a frills-in-the-right-places editor. Give gEdit a go, it is the default text editor in Ubuntu and Linux Mint.
Here is a link to an excellent guide on how to get gEdit to look and behave (somewhat) like TextMate: http://grigio.org/pimp_my_gedit_was_textmate_linux
Hope that helps.
According to HTML living standard specification, the load
event is
Fired at the Window when the document has finished loading; fired at an element containing a resource (e.g. img, embed) when its resource has finished loading
I.e. load
event is not fired on document
object.
Credit: Why does document.addEventListener(‘load’, handler) not work?
Ah, ok. What you're looking for is setHint(int)
. Simply pass in a resource id of a string from your xml and you're good to go.
And in XML, it's simply android:hint="someText"
I think it's just __file__
Sounds like you may also want to checkout the inspect module.
I know this is an old question but just for the record this can also be done by passing appropriate connection options as arguments to the _mysql.connect
call. For example,
con = _mysql.connect(host='localhost', user='dell-pc', passwd='', db='test',
connect_timeout=1000)
Notice the use of keyword parameters (host, passwd, etc.). They improve the readability of your code.
For detail about different arguments that you can pass to _mysql.connect
, see MySQLdb API documentation
Just in case somebody finds it usefull.
I had a problem with the KEYCODE_DPAD_UP it belongs to the trackBall. to solve this change your avdfolder/config.ini hw.trackBall=yes and push DEL or F6
Yes. Youtube API is the best resource for this.
There are 3 way to embed a video:
<iframe>
tagsDEPRECATED
I think you are looking for the second one of them:
The HTML and JavaScript code below shows a simple example that inserts a YouTube player into the page element that has an id value of ytplayer. The onYouTubePlayerAPIReady() function specified here is called automatically when the IFrame Player API code has loaded. This code does not define any player parameters and also does not define other event handlers.
<div id="ytplayer"></div>
<script>
// Load the IFrame Player API code asynchronously.
var tag = document.createElement('script');
tag.src = "https://www.youtube.com/player_api";
var firstScriptTag = document.getElementsByTagName('script')[0];
firstScriptTag.parentNode.insertBefore(tag, firstScriptTag);
// Replace the 'ytplayer' element with an <iframe> and
// YouTube player after the API code downloads.
var player;
function onYouTubePlayerAPIReady() {
player = new YT.Player('ytplayer', {
height: '390',
width: '640',
videoId: 'M7lc1UVf-VE'
});
}
</script>
Here are some instructions where you may take a look when starting using the API.
An embed example without using iframe
is to use <object>
tag:
<object width="640" height="360">
<param name="movie" value="http://www.youtube.com/embed/yt-video-id?html5=1&rel=0&hl=en_US&version=3"/
<param name="allowFullScreen" value="true"/>
<param name="allowscriptaccess" value="always"/>
<embed width="640" height="360" src="http://www.youtube.com/embed/yt-video-id?html5=1&rel=0&hl=en_US&version=3" class="youtube-player" type="text/html" allowscriptaccess="always" allowfullscreen="true"/>
</object>
(replace yt-video-id
with your video id)
You can fire the event manually after changing the selected option on the onclick event doing: document.getElementById("sel").onchange();
There is a bug in Chrome (not in Safari at the time we checked) that gives unexpected results in Javascript's various width and height measurements when opening tabs in the background (bug details here) - we logged the bug in June and it's remained unresolved since.
It's possible you've encountered the bug in what you're attempting to do.
Adding lots of load balancers creates extra overhead and latency and that is the drawback for scaling out horizontally in nosql databases. It is like the question why people say RPC is not recommended since it is not robust.
I think in a real system we should use both sql and nosql databases to utilize both multicore and cloud computing capabilities of today's systems.
On the other hand, complex transactional queries has high performance if sql databases such as oracle being used. NoSql could be used for bigdata and horizontal scalability by sharding.
A slight variant of Matthew Dowell's post which avoids the short flash, but displays whenever the contact form 7 form is visible:
div.grecaptcha-badge{
width:0 !important;
}
div.grecaptcha-badge.show{
width:256px !important;
}
I then added the following to the header.php in my child theme:
<script>
jQuery( window ).load(function () {
if( jQuery( '.wpcf7' ).length ){
jQuery( '.grecaptcha-badge' ).addClass( 'show' );
}
});
</script>
You can also use this direct command line to open the Advanced System Properties:
sysdm.cpl
Then go to the Advanced Tab -> Environment Variables
LD_LIBRARY_PATH
is searched when the program starts, LIBRARY_PATH
is searched at link time.
caveat from comments:
ld
(instead of gcc
or g++
), the LIBRARY_PATH
or LD_LIBRARY_PATH
environment variables are not read.gcc
or g++
, the LIBRARY_PATH
environment variable is read (see documentation "gcc
uses these directories when searching for ordinary libraries").Requires PHP5.3:
$begin = new DateTime('2010-05-01');
$end = new DateTime('2010-05-10');
$interval = DateInterval::createFromDateString('1 day');
$period = new DatePeriod($begin, $interval, $end);
foreach ($period as $dt) {
echo $dt->format("l Y-m-d H:i:s\n");
}
This will output all days in the defined period between $start
and $end
. If you want to include the 10th, set $end
to 11th. You can adjust format to your liking. See the PHP Manual for DatePeriod.
A clustered index alters the way that the rows are stored. When you create a clustered index on a column (or a number of columns), SQL server sorts the table’s rows by that column(s). It is like a dictionary, where all words are sorted in alphabetical order in the entire book.
A non-clustered index, on the other hand, does not alter the way the rows are stored in the table. It creates a completely different object within the table that contains the column(s) selected for indexing and a pointer back to the table’s rows containing the data. It is like an index in the last pages of a book, where keywords are sorted and contain the page number to the material of the book for faster reference.
Make sure that you also set "seeds" to the address which you provided at "listen_address"
Here's how you remove all the whitespace from the beginning and end of a String
.
(Example tested with Swift 2.0.)
let myString = " \t\t Let's trim all the whitespace \n \t \n "
let trimmedString = myString.stringByTrimmingCharactersInSet(
NSCharacterSet.whitespaceAndNewlineCharacterSet()
)
// Returns "Let's trim all the whitespace"
(Example tested with Swift 3+.)
let myString = " \t\t Let's trim all the whitespace \n \t \n "
let trimmedString = myString.trimmingCharacters(in: .whitespacesAndNewlines)
// Returns "Let's trim all the whitespace"
Bit late to the party, but this will get it done. I left the example at 600, as that is what most people will use:
Similar to Shay's example except this also includes max-width to work on the rest of the clients that do have support, as well as a second method to prevent the expansion (media query) which is needed for Outlook '11.
In the head:
<style type="text/css">
@media only screen and (min-width: 600px) { .maxW { width:600px !important; } }
</style>
In the body:
<!--[if (gte mso 9)|(IE)]><table width="600" align="center" cellpadding="0" cellspacing="0" border="0"><tr><td><![endif]-->
<div class="maxW" style="max-width:600px;">
<table width="100%" border="0" cellpadding="0" cellspacing="0" bgcolor="#FFFFFF">
<tr>
<td>
main content here
</td>
</tr>
</table>
</div>
<!--[if (gte mso 9)|(IE)]></td></tr></table><![endif]-->
Here is another example of this in use: Responsive order confirmation emails for mobile devices?
KvanTTT's code worked great. I extended it a bit to allow a little more flexibility on save format, as well as the ability to save by hWnd, .NET Control/Form. You can get a bitmap or save to file, with a few options.
using System;
using System.Drawing;
using System.Drawing.Imaging;
using System.IO;
using System.Runtime.InteropServices;
using System.Windows.Forms;
namespace MosaiqPerformanceMonitor {
public enum CaptureMode {
Screen, Window
}
public static class ScreenCapturer {
[DllImport("user32.dll")]
private static extern IntPtr GetForegroundWindow();
[DllImport("user32.dll")]
private static extern IntPtr GetWindowRect(IntPtr hWnd, ref Rect rect);
[StructLayout(LayoutKind.Sequential)]
private struct Rect {
public int Left;
public int Top;
public int Right;
public int Bottom;
}
[DllImport("user32.dll", CharSet = CharSet.Auto, ExactSpelling = true)]
public static extern IntPtr GetDesktopWindow();
/// <summary> Capture Active Window, Desktop, Window or Control by hWnd or .NET Contro/Form and save it to a specified file. </summary>
/// <param name="filename">Filename.
/// <para>* If extension is omitted, it's calculated from the type of file</para>
/// <para>* If path is omitted, defaults to %TEMP%</para>
/// <para>* Use %NOW% to put a timestamp in the filename</para></param>
/// <param name="mode">Optional. The default value is CaptureMode.Window.</param>
/// <param name="format">Optional file save mode. Default is PNG</param>
public static void CaptureAndSave(string filename, CaptureMode mode = CaptureMode.Window, ImageFormat format = null) {
ImageSave(filename, format, Capture(mode));
}
/// <summary> Capture a specific window (or control) and save it to a specified file. </summary>
/// <param name="filename">Filename.
/// <para>* If extension is omitted, it's calculated from the type of file</para>
/// <para>* If path is omitted, defaults to %TEMP%</para>
/// <para>* Use %NOW% to put a timestamp in the filename</para></param>
/// <param name="handle">hWnd (handle) of the window to capture</param>
/// <param name="format">Optional file save mode. Default is PNG</param>
public static void CaptureAndSave(string filename, IntPtr handle, ImageFormat format = null) {
ImageSave(filename, format, Capture(handle));
}
/// <summary> Capture a specific window (or control) and save it to a specified file. </summary>
/// <param name="filename">Filename.
/// <para>* If extension is omitted, it's calculated from the type of file</para>
/// <para>* If path is omitted, defaults to %TEMP%</para>
/// <para>* Use %NOW% to put a timestamp in the filename</para></param>
/// <param name="c">Object to capture</param>
/// <param name="format">Optional file save mode. Default is PNG</param>
public static void CaptureAndSave(string filename, Control c, ImageFormat format = null) {
ImageSave(filename, format, Capture(c));
}
/// <summary> Capture the active window (default) or the desktop and return it as a bitmap </summary>
/// <param name="mode">Optional. The default value is CaptureMode.Window.</param>
public static Bitmap Capture(CaptureMode mode = CaptureMode.Window) {
return Capture(mode == CaptureMode.Screen ? GetDesktopWindow() : GetForegroundWindow());
}
/// <summary> Capture a .NET Control, Form, UserControl, etc. </summary>
/// <param name="c">Object to capture</param>
/// <returns> Bitmap of control's area </returns>
public static Bitmap Capture(Control c) {
return Capture(c.Handle);
}
/// <summary> Capture a specific window and return it as a bitmap </summary>
/// <param name="handle">hWnd (handle) of the window to capture</param>
public static Bitmap Capture(IntPtr handle) {
Rectangle bounds;
var rect = new Rect();
GetWindowRect(handle, ref rect);
bounds = new Rectangle(rect.Left, rect.Top, rect.Right - rect.Left, rect.Bottom - rect.Top);
CursorPosition = new Point(Cursor.Position.X - rect.Left, Cursor.Position.Y - rect.Top);
var result = new Bitmap(bounds.Width, bounds.Height);
using (var g = Graphics.FromImage(result))
g.CopyFromScreen(new Point(bounds.Left, bounds.Top), Point.Empty, bounds.Size);
return result;
}
/// <summary> Position of the cursor relative to the start of the capture </summary>
public static Point CursorPosition;
/// <summary> Save an image to a specific file </summary>
/// <param name="filename">Filename.
/// <para>* If extension is omitted, it's calculated from the type of file</para>
/// <para>* If path is omitted, defaults to %TEMP%</para>
/// <para>* Use %NOW% to put a timestamp in the filename</para></param>
/// <param name="format">Optional file save mode. Default is PNG</param>
/// <param name="image">Image to save. Usually a BitMap, but can be any
/// Image.</param>
static void ImageSave(string filename, ImageFormat format, Image image) {
format = format ?? ImageFormat.Png;
if (!filename.Contains("."))
filename = filename.Trim() + "." + format.ToString().ToLower();
if (!filename.Contains(@"\"))
filename = Path.Combine(Environment.GetEnvironmentVariable("TEMP") ?? @"C:\Temp", filename);
filename = filename.Replace("%NOW%", DateTime.Now.ToString("[email protected]"));
image.Save(filename, format);
}
}
}
The easiest way to accomplish this is to override the RaisePostBackEvent method.
<input type="button" ID="btnRaisePostBack" runat="server" onclick="raisePostBack();" ... />
And in your JavaScript:
raisePostBack = function(){
__doPostBack("<%=btnRaisePostBack.ClientID%>", "");
}
And in your code:
protected override void RaisePostBackEvent(IPostBackEventHandler source, string eventArgument)
{
//call the RaisePostBack event
base.RaisePostBackEvent(source, eventArgument);
if (source == btnRaisePostBack)
{
//do some logic
}
}
you can get the data from the XML by using "simplexml_load_file" Function. Please refer this link
http://php.net/manual/en/function.simplexml-load-file.php
$url = "http://maps.google.com/maps/api/directions/xml?origin=Quentin+Road+Brooklyn%2C+New+York%2C+11234+United+States&destination=550+Madison+Avenue+New+York%2C+New+York%2C+10001+United+States&sensor=false";
$xml = simplexml_load_file($url);
print_r($xml);
Let's call keys
the list/iterator of keys that you are given to remove. I'd do this:
keys_to_remove = set(keys).intersection(set(mydict.keys()))
for key in keys_to_remove:
del mydict[key]
You calculate up front all the affected items and operate on them.
I prefer to create a new dictionary over mutating an existing one, so I would probably also consider this:
keys_to_keep = set(mydict.keys()) - set(keys)
new_dict = {k: v for k, v in mydict.iteritems() if k in keys_to_keep}
or:
keys_to_keep = set(mydict.keys()) - set(keys)
new_dict = {k: mydict[k] for k in keys_to_keep}
There is a simpler way in Android
DateFormat.getInstance().format(currentTimeMillis);
Moreover, Date is deprecated, so use DateFormat class.
DateFormat.getDateInstance().format(new Date(0));
DateFormat.getDateTimeInstance().format(new Date(0));
DateFormat.getTimeInstance().format(new Date(0));
The above three lines will give:
Dec 31, 1969
Dec 31, 1969 4:00:00 PM
4:00:00 PM 12:00:00 AM
For the Germans:
you have to change your decimal commas into a Full stop in your csv-file (in Excel:File -> Options -> Advanced -> "Decimal seperator") , then the error is solved.
if your column contain any value that you want to neglect. it will help you
## da is data frame & Ozone is column name
##for single column
mean(da$Ozone, na.rm = TRUE)
##for all columns
colMeans(x=da, na.rm = TRUE)
I ran into this error in some code where someone was calling exit() in one thread about the same time as main()
returned, so all the global/static constructors were being kicked off in two separate threads simultaneously.
This error also manifests as double free or corruption
, or a segfault/sig11 inside exit()
or inside malloc_consolidate
, and likely others. The call stack for the malloc_consolidate crash may resemble:
#0 0xabcdabcd in malloc_consolidate () from /lib/libc.so.6
#1 0xabcdabcd in _int_free () from /lib/libc.so.6
#2 0xabcdabcd in operator delete (...)
#3 0xabcdabcd in operator delete[] (...)
(...)
I couldn't get it to exhibit this problem while running under valgrind.
I had the same problem, but when I was surfing on the internet I understood that $http return back by default a promise, then I could use it with "then" after return the "data". look at the code:
app.service('myService', function($http) {
this.getData = function(){
var myResponseData = $http.get('test.json').then(function (response) {
console.log(response);.
return response.data;
});
return myResponseData;
}
});
app.controller('MainCtrl', function( myService, $scope) {
// Call the getData and set the response "data" in your scope.
myService.getData.then(function(myReponseData) {
$scope.data = myReponseData;
});
});
Follow these steps to fix this it looks too long but trust me it won't take more than 5 minutes:
Step-1: Create two ssh key pairs:
ssh-keygen -t rsa -C "[email protected]"
Step-2: It will create two ssh keys here:
~/.ssh/id_rsa_account1
~/.ssh/id_rsa_account2
Step-3: Now we need to add these keys:
ssh-add ~/.ssh/id_rsa_account2
ssh-add ~/.ssh/id_rsa_account1
- You can see the added keys list by using this command:
ssh-add -l
- You can remove old cached keys by this command:
ssh-add -D
Step-4: Modify the ssh config
cd ~/.ssh/
touch config
subl -a config
or code config
or nano config
Step-5: Add this to config file:
#Github account1
Host github.com-account1
HostName github.com
User account1
IdentityFile ~/.ssh/id_rsa_account1
#Github account2
Host github.com-account2
HostName github.com
User account2
IdentityFile ~/.ssh/id_rsa_account2
Step-6: Update your .git/config
file:
Step-6.1: Navigate to account1's project and update host:
[remote "origin"]
url = [email protected]:account1/gfs.git
If you are invited by some other user in their git Repository. Then you need to update the host like this:
[remote "origin"]
url = [email protected]:invitedByUserName/gfs.git
Step-6.2: Navigate to account2's project and update host:
[remote "origin"]
url = [email protected]:account2/gfs.git
Step-7: Update user name and email for each repository separately if required this is not an amendatory step:
Navigate to account1 project and run these:
git config user.name "account1"
git config user.email "[email protected]"
Navigate to account2 project and run these:
git config user.name "account2"
git config user.email "[email protected]"
You can just use Eloquent::insert()
.
For example:
$data = array(
array('name'=>'Coder 1', 'rep'=>'4096'),
array('name'=>'Coder 2', 'rep'=>'2048'),
//...
);
Coder::insert($data);
You can use a collection initializer:
UserCode = new byte[]{0x20,0x20,0x20,0x20,0x20,0x20};
This will work better than Repeat
if the values are not identical.
You need to do a couple of things to use the library:
Make sure that you have both the *.lib and the *.dll from the library you want to use. If you don't have the *.lib, skip #2
Put a reference to the *.lib in the project. Right click the project name in the Solution Explorer and then select Configuration Properties->Linker->Input and put the name of the lib in the Additional Dependencies property.
You have to make sure that VS can find the lib you just added so you have to go to the Tools menu and select Options... Then under Projects and Solutions select VC++ Directories,edit Library Directory option. From within here you can set the directory that contains your new lib by selecting the 'Library Files' in the 'Show Directories For:' drop down box. Just add the path to your lib file in the list of directories. If you dont have a lib you can omit this, but while your here you will also need to set the directory which contains your header files as well under the 'Include Files'. Do it the same way you added the lib.
After doing this you should be good to go and can use your library. If you dont have a lib file you can still use the dll by importing it yourself. During your applications startup you can explicitly load the dll by calling LoadLibrary (see: http://msdn.microsoft.com/en-us/library/ms684175(VS.85).aspx for more info)
Cheers!
EDIT
Remember to use #include < Foo.h > as opposed to #include "foo.h". The former searches the include path. The latter uses the local project files.
Here you go, Python documentation on old string formatting. tutorial -> 7.1.1. Old String Formatting -> "More information can be found in the [link] section".
Note that you should start using the new string formatting when possible.
I shared my experience of using two LEFT JOINS in a single SQL query.
I have 3 tables:
Table 1) Patient consists columns PatientID, PatientName
Table 2) Appointment consists columns AppointmentID, AppointmentDateTime, PatientID, DoctorID
Table 3) Doctor consists columns DoctorID, DoctorName
Query:
SELECT Patient.patientname, AppointmentDateTime, Doctor.doctorname
FROM Appointment
LEFT JOIN Doctor ON Appointment.doctorid = Doctor.doctorId //have doctorId column common
LEFT JOIN Patient ON Appointment.PatientId = Patient.PatientId //have patientid column common
WHERE Doctor.Doctorname LIKE 'varun%' // setting doctor name by using LIKE
AND Appointment.AppointmentDateTime BETWEEN '1/16/2001' AND '9/9/2014' //comparison b/w dates
ORDER BY AppointmentDateTime ASC; // getting data as ascending order
I wrote the solution to get date format like "mm/dd/yy" (under my name "VARUN TEJ REDDY")
Reverse the entire string, then reverse the letters of each individual word.
After the first pass the string will be
s1 = "Z Y X si eman yM"
and after the second pass it will be
s1 = "Z Y X is name My"
In order to receive actual data stored in the table, you should use one of fetch...() functions or use the cursor as an iterator (i.e. "for row in cursor"...). This is described in the documentation:
cursor.execute("select user_id, user_name from users where user_id < 100")
rows = cursor.fetchall()
for row in rows:
print row.user_id, row.user_name
check this code from MainActivity
// Check location permission is granted - if it is, start
// the service, otherwise request the permission
fun checkOrAskLocationPermission(callback: () -> Unit) {
// Check GPS is enabled
val lm = getSystemService(Context.LOCATION_SERVICE) as LocationManager
if (!lm.isProviderEnabled(LocationManager.GPS_PROVIDER)) {
Toast.makeText(this, "Please enable location services", Toast.LENGTH_SHORT).show()
buildAlertMessageNoGps(this)
return
}
// Check location permission is granted - if it is, start
// the service, otherwise request the permission
val permission = ContextCompat.checkSelfPermission(this, Manifest.permission.ACCESS_FINE_LOCATION)
if (permission == PackageManager.PERMISSION_GRANTED) {
callback.invoke()
} else {
// callback will be inside the activity's onRequestPermissionsResult(
ActivityCompat.requestPermissions(
this,
arrayOf(Manifest.permission.ACCESS_FINE_LOCATION),
PERMISSIONS_REQUEST
)
}
}
plus
override fun onRequestPermissionsResult(requestCode: Int, permissions: Array<out String>, grantResults: IntArray) {
super.onRequestPermissionsResult(requestCode, permissions, grantResults)
if (requestCode == PERMISSIONS_REQUEST) {
if (grantResults[0] == PackageManager.PERMISSION_GRANTED){
// Permission ok. Do work.
}
}
}
plus
fun buildAlertMessageNoGps(context: Context) {
val builder = AlertDialog.Builder(context);
builder.setMessage("Your GPS is disabled. Do you want to enable it?")
.setCancelable(false)
.setPositiveButton("Yes") { _, _ -> context.startActivity(Intent(Settings.ACTION_LOCATION_SOURCE_SETTINGS)) }
.setNegativeButton("No") { dialog, _ -> dialog.cancel(); }
val alert = builder.create();
alert.show();
}
usage
checkOrAskLocationPermission() {
// Permission ok. Do work.
}
Here's my solution in vimrc:
"keep cursor in the middle all the time :)
nnoremap k kzz
nnoremap j jzz
nnoremap p pzz
nnoremap P Pzz
nnoremap G Gzz
nnoremap x xzz
inoremap <ESC> <ESC>zz
nnoremap <ENTER> <ENTER>zz
inoremap <ENTER> <ENTER><ESC>zzi
nnoremap o o<ESC>zza
nnoremap O O<ESC>zza
nnoremap a a<ESC>zza
So that the cursor will stay in the middle of the screen, and the screen will move up or down.
It's not ideal, but you could disable Jackson's auto-discovery of JSON properties, using @JsonAutoDetect
at the class level. This would prevent it from trying to handle the Javassist stuff (and failing).
This means that you then have to annotate each getter manually (with @JsonProperty
), but that's not necessarily a bad thing, since it keeps things explicit.
I had a similar problem, I tried to clear all the caches possible (tried almost all the solutions above) and the only thing that worked for me was to kill the expo app and to restart it.
<activity android:name=".yourActivity"
android:screenOrientation="portrait" ... />
add to main activity and add
android:configChanges="keyboardHidden"
to keep your program from changing mode when keyboard is called.
Javascript cannot access the filesystem and check for existence. The only interaction with the filesystem is with loading js files and images (png/gif/etc).
Javascript is not the task for this
You should use return as in:
function refreshGrid(entity) {
var store = window.localStorage;
var partitionKey;
if (exit) {
return;
}
With using Smart-IP.net Geo-IP API. For example, by using jQuery:
$(document).ready( function() {
$.getJSON( "http://smart-ip.net/geoip-json?callback=?",
function(data){
alert( data.host);
}
);
});
CTRL-W >
and
CTRL-W <
to make the window wider or narrower.
As specified here I guess you need to add a messageConverter
for MappingJacksonHttpMessageConverter
int sizeInDP = 16;
int marginInDp = (int) TypedValue.applyDimension(
TypedValue.COMPLEX_UNIT_DIP, sizeInDP, getResources()
.getDisplayMetrics());
Then
layoutParams = myView.getLayoutParams()
layoutParams.setMargins(marginInDp, marginInDp, marginInDp, marginInDp);
myView.setLayoutParams(layoutParams);
Or
LayoutParams layoutParams = new LayoutParams...
layoutParams.setMargins(marginInDp, marginInDp, marginInDp, marginInDp);
myView.setLayoutParams(layoutParams);
To detach from the container you simply hold Ctrl and press P + Q.
To attach to a running container you use:
$ docker container attach "container_name"
I use the following code to solve my question. It works. But as we all know, I work around a country's mile to solve it. So, is there a short cut for that? Thanks
def filter_null(field : Any) : Int = field match {
case null => 0
case _ => 1
}
val test = train_event_join.join(
user_friends_pair,
train_event_join("user_id") === user_friends_pair("user_id") &&
train_event_join("event_owner") === user_friends_pair("friend_id"),
"left"
).select(
train_event_join("user_id"),
train_event_join("event_id"),
train_event_join("invited"),
train_event_join("day_diff"),
train_event_join("interested"),
train_event_join("event_owner"),
user_friends_pair("friend_id")
).rdd.map{
line => (
line(0).toString.toLong,
line(1).toString.toLong,
line(2).toString.toLong,
line(3).toString.toLong,
line(4).toString.toLong,
line(5).toString.toLong,
filter_null(line(6))
)
}.toDF("user_id", "event_id", "invited", "day_diff", "interested", "event_owner", "creator_is_friend")
This is the way I am requesting User Permissions.
Outside your application tag in AndroidManifest.xml add these permission requests.
<uses-permission android:name="android.permission.INTERNET" />
<uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION"/>
<uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />
Then add Google's Location dependencies in the App Gradle file.
implementation 'com.google.android.gms:play-services-location:15.0.0'
Now declare some Global variables.
private lateinit var mFusedLocationProvider:FusedLocationProviderClient
private lateinit var mLocationCallback: LocationCallback
private lateinit var mLocationRequest: LocationRequest
private var mLocationPermissionGranted:Boolean = false
In OnCreate method of your Activity (I was not able to Format the Code Properly, Apology for that)
mFusedLocationProvider = LocationServices.getFusedLocationProviderClient(this)
//Location Callback
mLocationCallback = object: LocationCallback(){
override fun onLocationResult(p0: LocationResult?) {
if(p0==null){
//todo(request user to enable location from settings then remove return)
return
}else{
getDeviceLocation()
}
}
}
//Location Request
mLocationRequest = LocationRequest.create()
mLocationRequest.priority = LocationRequest.PRIORITY_BALANCED_POWER_ACCURACY
//Set the Interval for Latest Interval Update
mLocationRequest.interval = 5000
//Set How Many Location Updated you Want
mLocationRequest.numUpdates = 1
getLocationPermission()
getDeviceLocation()
Now create both the functions.
private fun getLocationPermission() {
val permission:Array<String> = arrayOf(android.Manifest.permission.ACCESS_FINE_LOCATION,android.Manifest.permission.ACCESS_COARSE_LOCATION)
if(ContextCompat.checkSelfPermission(applicationContext,Constant.FINE_LOCATION)== PermissionChecker.PERMISSION_GRANTED){
if(ContextCompat.checkSelfPermission(applicationContext,Constant.COARSE_LOCATION)== PermissionChecker.PERMISSION_GRANTED){
mLocationPermissionGranted = true
}
}else{
ActivityCompat.requestPermissions(this,permission,Constant.LOCATION_REQUEST_CODE)
}
}
Second Method
private fun getDeviceLocation() {
try{
if(mLocationPermissionGranted){
mFusedLocationProvider.lastLocation.addOnCompleteListener(this,{task: Task<Location> ->
if(task.isSuccessful){
var currentLocation: Location? = task.result
if(currentLocation!=null){
Log.i("Location","Latitude is ${currentLocation.latitude} and Longitude" +
"${currentLocation.longitude}")
}
else
mFusedLocationProvider.requestLocationUpdates(mLocationRequest,mLocationCallback,null)
}
})
}
}catch (e:SecurityException){
Log.e("Error", "Security Exception ${e.message}")
}
}
For Constant.kt
class Constant{
companion object {
//Location Request Settings
const val SET_INTERVAL:Long = 2000
const val NUM_UPDATES:Int = 1
//Location Permission
const val FINE_LOCATION:String = android.Manifest.permission.ACCESS_FINE_LOCATION
const val COARSE_LOCATION:String = android.Manifest.permission.ACCESS_COARSE_LOCATION
}
}
The wizard likely created the package as a file. Do a search on your system for files with an extension of .dtsx. This is the actual "SSIS Package" file.
As for loading it in Management Studio, you don't actually view it through there. If you have SQL Server 2005 loaded on your machine, look in the program group. You should find an application with the same icon as Visual Studio called "SQL Server Business Intelligence Development Studio". It's basically a stripped down version of VS 2005 which allows you to create SSIS packages.
Create a blank solution and add your .dtsx file to that to edit/view it.
You could fill the dependend cell (D2) by a User Defined Function (VBA Macro Function) that takes the value of the C2-Cell as input parameter, returning the current date as ouput.
Having C2 as input parameter for the UDF in D2 tells Excel that it needs to reevaluate D2 everytime C2 changes (that is if auto-calculation of formulas is turned on for the workbook).
EDIT:
Here is some code:
For the UDF:
Public Function UDF_Date(ByVal data) As Date
UDF_Date = Now()
End Function
As Formula in D2:
=UDF_Date(C2)
You will have to give the D2-Cell a Date-Time Format, or it will show a numeric representation of the date-value.
And you can expand the formula over the desired range by draging it if you keep the C2 reference in the D2-formula relative.
Note: This still might not be the ideal solution because every time Excel recalculates the workbook the date in D2 will be reset to the current value. To make D2 only reflect the last time C2 was changed there would have to be some kind of tracking of the past value(s) of C2. This could for example be implemented in the UDF by providing also the address alonside the value of the input parameter, storing the input parameters in a hidden sheet, and comparing them with the previous values everytime the UDF gets called.
Addendum:
Here is a sample implementation of an UDF that tracks the changes of the cell values and returns the date-time when the last changes was detected. When using it, please be aware that:
The usage of the UDF is the same as described above.
The UDF works only for single cell input ranges.
The cell values are tracked by storing the last value of cell and the date-time when the change was detected in the document properties of the workbook. If the formula is used over large datasets the size of the file might increase considerably as for every cell that is tracked by the formula the storage requirements increase (last value of cell + date of last change.) Also, maybe Excel is not capable of handling very large amounts of document properties and the code might brake at a certain point.
If the name of a worksheet is changed all the tracking information of the therein contained cells is lost.
The code might brake for cell-values for which conversion to string is non-deterministic.
The code below is not tested and should be regarded only as proof of concept. Use it at your own risk.
Public Function UDF_Date(ByVal inData As Range) As Date
Dim wb As Workbook
Dim dProps As DocumentProperties
Dim pValue As DocumentProperty
Dim pDate As DocumentProperty
Dim sName As String
Dim sNameDate As String
Dim bDate As Boolean
Dim bValue As Boolean
Dim bChanged As Boolean
bDate = True
bValue = True
bChanged = False
Dim sVal As String
Dim dDate As Date
sName = inData.Address & "_" & inData.Worksheet.Name
sNameDate = sName & "_dat"
sVal = CStr(inData.Value)
dDate = Now()
Set wb = inData.Worksheet.Parent
Set dProps = wb.CustomDocumentProperties
On Error Resume Next
Set pValue = dProps.Item(sName)
If Err.Number <> 0 Then
bValue = False
Err.Clear
End If
On Error GoTo 0
If Not bValue Then
bChanged = True
Set pValue = dProps.Add(sName, False, msoPropertyTypeString, sVal)
Else
bChanged = pValue.Value <> sVal
If bChanged Then
pValue.Value = sVal
End If
End If
On Error Resume Next
Set pDate = dProps.Item(sNameDate)
If Err.Number <> 0 Then
bDate = False
Err.Clear
End If
On Error GoTo 0
If Not bDate Then
Set pDate = dProps.Add(sNameDate, False, msoPropertyTypeDate, dDate)
End If
If bChanged Then
pDate.Value = dDate
Else
dDate = pDate.Value
End If
UDF_Date = dDate
End Function
Make the insertion of the date conditional upon the range.
This has an advantage of not changing the dates unless the content of the cell is changed, and it is in the range C2:C2, even if the sheet is closed and saved, it doesn't recalculate unless the adjacent cell changes.
Adapted from this tip and @Paul S answer
Private Sub Worksheet_Change(ByVal Target As Range)
Dim R1 As Range
Dim R2 As Range
Dim InRange As Boolean
Set R1 = Range(Target.Address)
Set R2 = Range("C2:C20")
Set InterSectRange = Application.Intersect(R1, R2)
InRange = Not InterSectRange Is Nothing
Set InterSectRange = Nothing
If InRange = True Then
R1.Offset(0, 1).Value = Now()
End If
Set R1 = Nothing
Set R2 = Nothing
End Sub
You can use attrchange jQuery plugin. The main function of the plugin is to bind a listener function on attribute change of HTML elements.
Code sample:
$("#myDiv").attrchange({
trackValues: true, // set to true so that the event object is updated with old & new values
callback: function(evnt) {
if(evnt.attributeName == "display") { // which attribute you want to watch for changes
if(evnt.newValue.search(/inline/i) == -1) {
// your code to execute goes here...
}
}
}
});
I also needed build-essential installed:
sudo apt-get install build-essential
I have had the unfortunate task of testing threaded code and they are definitely the hardest tests I have ever written.
When writing my tests, I used a combination of delegates and events. Basically it is all about using PropertyNotifyChanged
events with a WaitCallback
or some kind of ConditionalWaiter
that polls.
I am not sure if this was the best approach, but it has worked out for me.
Try Like this :
TextView text=(TextView)findViewById(R.id.textviewID);
text.setText("Text");
Instead of this:
text = (EditText) findViewById(R.id.this_is_the_id_of_textview);
text.setText("TEST");
keep using the id
<?php
namespace App;
use Illuminate\Database\Eloquent\Model;
class UserVerification extends Model
{
protected $table = 'user_verification';
protected $fillable = [
'id',
'email',
'verification_token'
];
//$timestamps = false;
protected $primaryKey = 'verification_token';
}
and get the email :
$usr = User::find($id);
$token = $usr->verification_token;
$email = UserVerification::find($token);
Try this:
INSERT INTO `center_course_fee` (`fk_course_id`,`fk_center_code`,`course_fee`) VALUES ('69', '4920153', '6000') ON DUPLICATE KEY UPDATE `course_fee` = '6000';
"All I want to do is join the tables and then group all the employees in a particular location together."
It sounds like what you want is for the output of the SQL statement to list every employee in the company, but first all the people in the Anaheim office, then the people in the Buffalo office, then the people in the Cleveland office (A, B, C, get it, obviously I don't know what locations you have).
In that case, lose the GROUP BY statement. All you need is ORDER BY loc.LocationID
Use array_splice
to empty an array and retain the reference:
array_splice($myArray, 0);
what you are doing here is reading one character at a time from the input stream and assume that all the characters between " " represent a word. BUT it's unlikely to be a " " after the last word, so that's probably why it does not work:
"word1 word2 word2EOF"
Change the checkboxes so that the name includes the index inside the brackets:
<input type="checkbox" class="checkbox_veh" id="checkbox_addveh<?php echo $i; ?>" <?php if ($vehicle_feature[$i]->check) echo "checked"; ?> name="feature[<?php echo $i; ?>]" value="<?php echo $vehicle_feature[$i]->id; ?>">
The checkboxes that aren't checked are never submitted. The boxes that are checked get submitted, but they get numbered consecutively from 0, and won't have the same indexes as the other corresponding input fields.
Why not like this?
SELECT count(1)
FROM AD_CurrentView
WHERE myColumn=1
As of MVC 5.1, you can now do the following:
@Html.EditorFor(model => model, new { htmlAttributes = new { @class = "form-control" }, })
http://www.asp.net/mvc/overview/releases/mvc51-release-notes#new-features
You can try MailKit MailKit is an Open Source cross-platform .NET mail-client library that is based on MimeKit and optimized for mobile devices. You can use easily in your application.You can download from here.
MimeMessage mailMessage = new MimeMessage();
mailMessage.From.Add(new MailboxAddress(fromName, [email protected]));
mailMessage.Sender = new MailboxAddress(senderName, [email protected]);
mailMessage.To.Add(new MailboxAddress(emailid, emailid));
mailMessage.Subject = subject;
mailMessage.ReplyTo.Add(new MailboxAddress(replyToAddress));
mailMessage.Subject = subject;
var builder = new BodyBuilder();
builder.TextBody = "Hello There";
try
{
using (var smtpClient = new SmtpClient())
{
smtpClient.Connect("HostName", "Port", MailKit.Security.SecureSocketOptions.None);
smtpClient.Authenticate("[email protected]", "password");
smtpClient.Send(mailMessage);
Console.WriteLine("Success");
}
}
catch (SmtpCommandException ex)
{
Console.WriteLine(ex.ToString());
}
catch (Exception ex)
{
Console.WriteLine(ex.ToString());
}
If you are on windows and using mingw, gcc uses the win32 runtime, where printf needs %I64d
for a 64 bit integer. (and %I64u
for an unsinged 64 bit integer)
For most other platforms you'd use %lld
for printing a long long. (and %llu
if it's unsigned). This is standarized in C99.
gcc doesn't come with a full C runtime, it defers to the platform it's running on - so the general case is that you need to consult the documentation for your particular platform - independent of gcc.
Don't you need this
DBCC SHRINKFILE ('Wxlog0', 0)
Just be sure that you are aware of the dangers: see here: Do not truncate your ldf files!
When I'm doing something like this I use the onKeyUp event.
<script type="text/javascript">
function bar() {
//do stuff
}
<input type="text" name="foo" onKeyUp="return bar()" />
but if you don't want to use an HTML event you could try to use jQuerys .change() method
$('.target').change(function() {
//do stuff
});
in this example, the input would have to have a class "target"
if you're going to have multiple text boxes that you want to have done the same thing when their text is changed and you need their data then you could do this:
$('.target').change(function(event) {
//do stuff with the "event" object as the object that called the method
)};
that way you can use the same code, for multiple text boxes using the same class without having to rewrite any code.
Basically comes down to Windows standard: \r\n and Unix based systems using: \n
Your browser is sitting on top of TCP/IP, as the web is based on standards, usually port 80, what happens is when you enter an address, such as google.com, your computer where the browser is running on, creates packets of data, encapsulated at each layer accordingly to the OSI standards, (think of envelopes of different sizes, packed into each envelope of next size), OSI defines 7 layers, in one of the envelopes contains the source address and destination address(that is the website) encoded in binary.
As it reaches the 1st layer, in OSI terms, it gets transmitted across the media transmitter (such as cable, DSL).
If you are connected via ISP, the layered pack of envelopes gets transmitted to the ISP, the ISP's network system, peeks through the layered pack of envelopes by decoding in reverse order to find out the address, then the ISP checks their Domain Name System database to find out if they have a route to that address (cached in memory, if it does, it forwards it across the internet network - again layered pack of envelopes).
If it doesn't, the ISP interrogates the top level DNS server to say 'Hey, get me the route for the address as supplied by you, ie. the browser', the top level DNS server then passes the route to the ISP which is then stored in the ISP's server memory.
The layered pack of envelopes are transmitted and received by the website server after successful routing of the packets (think of routing as signposts for directions to get to the server), which in turn, unpacks the layered pack of envelopes, extracts the source address and says 'Aha, that is for me, right, I know the destination address (that is you, the browser), then the server packetizes the webpages into a packed layered envelopes and sends it back (usually in reverse route, but not always the case).
Your browser than receives the packetized envelopes and unpacks each of them. Then your computer descrambles the data and your browser renders the pages on the screen.
I hope this answer is sufficient enough for your understanding.
Use sql
from sql
:
spool output of this to a file:
select 'alter index '||owner||'.'||index_name||' rebuild tablespace TO_TABLESPACE_NAME;' from all_indexes where owner='OWNERNAME';
spoolfile will have something like this:
alter index OWNER.PK_INDEX rebuild tablespace CORRECT_TS_NAME;
A related issue:
Wasted 3 hours spanning several days.
On a AWS EC2 machine, below worked:
sudo chown -R $(whoami) /home/ubuntu/.cache
sudo chown -R $(whoami) /home/ubuntu/.config
sudo chown -R $(whoami) /home/ubuntu/.local
sudo chown -R $(whoami) /home/ubuntu/.npm
sudo chown -R $(whoami) /home/ubuntu/.pm2
Hope that helps.
You could also use a URI template. If you structured your request into a restful URL Spring could parse the provided value from the url.
HTML
<li>
<a id="byParameter"
class="textLink" href="<c:url value="/mapping/parameter/bar />">By path, method,and
presence of parameter</a>
</li>
Controller
@RequestMapping(value="/mapping/parameter/{foo}", method=RequestMethod.GET)
public @ResponseBody String byParameter(@PathVariable String foo) {
//Perform logic with foo
return "Mapped by path + method + presence of query parameter! (MappingController)";
}
I removed all the /node_modules
folder then ran npm install
and it worked.
I have node v5.5.0, npm 3.3.12
If you want to manually add support to your site, you can just add the following to your web.config in the system.webServer section:
<staticContent>
<mimeMap fileExtension=".json" mimeType="application/json" />
</staticContent>
This will add a "local" configuration under IIS. This does not work in IIS6, but does work in IIS7 and newer.
A practical explanation: By default, <p> </p>
will add line breaks before and after the enclosed text (so it creates a paragraph). <span>
does not do this, that is why it is called inline.
Change column position:
ALTER TABLE Employees
CHANGE empName empName VARCHAR(50) NOT NULL AFTER department;
If you need to move it to the first position you have to use term FIRST at the end of ALTER TABLE CHANGE [COLUMN] query:
ALTER TABLE UserOrder
CHANGE order_id order_id INT(11) NOT NULL FIRST;
Just an alternative to
ls -d "$PWD/"*
to pinpoint that *
is shell expansion, so
echo "$PWD/"*
would do the same (the drawback you cannot use -1
to separate by new lines, not spaces).
SQLite: The above answers are all correct. For SQLite, it is a little bit different. Nothing really helps, even to put it in a batch is (sometimes) not improving performance. In that case, try to disable auto-commit and commit by hand after you are done (Warning! When multiple connections write at the same time, you can clash with these operations)
// connect(), yourList and compiledQuery you have to implement/define beforehand
try (Connection conn = connect()) {
conn.setAutoCommit(false);
preparedStatement pstmt = conn.prepareStatement(compiledQuery);
for(Object o : yourList){
pstmt.setString(o.toString());
pstmt.executeUpdate();
pstmt.getGeneratedKeys(); //if you need the generated keys
}
pstmt.close();
conn.commit();
}
This answer to a similar question describes how to extend the properties plugin so it can use a remote descriptor for the properties file. The descriptor is basically a jar artifact containing a properties file (the properties file is included under src/main/resources).
The descriptor is added as a dependency to the extended properties plugin so it is on the plugin's classpath. The plugin will search the classpath for the properties file, read the file''s contents into a Properties instance, and apply those properties to the project's configuration so they can be used elsewhere.
To see the size of logs per container, you can use this bash command :
for cont_id in $(docker ps -aq); do cont_name=$(docker ps | grep $cont_id | awk '{ print $NF }') && cont_size=$(docker inspect --format='{{.LogPath}}' $cont_id | xargs sudo ls -hl | awk '{ print $5 }') && echo "$cont_name ($cont_id): $cont_size"; done
Example output:
container_name (6eed984b29da): 13M
elegant_albattani (acd8f73aa31e): 2.3G
For the first question I think answer would be:
<your DataFrame>.rename(columns={'count':'Total_Numbers'})
or
<your DataFrame>.columns = ['ID', 'Region', 'Total_Numbers']
As for second one I'd say the answer would be no. It's possible to use it like 'df.ID' because of python datamodel:
Attribute references are translated to lookups in this dictionary, e.g., m.x is equivalent to m.dict["x"]
to wait until the click itself is complete (ie to resolve the Promise), use await
keyword
it('test case 1', async () => {
await login.submit.click();
})
This will stop the command queue until the click (sendKeys, sleep or any other command) is finished
If you're lucky and you're on angular page that is built well and doesn't have micro and macro tasks pending then Protractor should wait by itself until the page is ready. But sometimes you need to handle waiting yourself, for example when logging in through a page that is not Angular (read how to find out if page has pending tasks and how to work with non angular pages)
In the case you're handling the waiting manually, browser.wait
is the way to go. Just pass a function to it that would have a condition which to wait for. For example wait until there is no loading animation on the page
let $animation = $$('.loading');
await browser.wait(
async () => (await animation.count()) === 0, // function; if returns true it stops waiting; can wait for anything in the world if you get creative with it
5000, // timeout
`message on timeout`
);
Make sure to use await
window.clipboardData.getData('Text')
will work in some browsers. However, many browsers where it does work will prompt the user as to whether or not they wish the web page to have access to the clipboard.
In My case there was space in the path that was failing the script.If you are using variables like $PROJECT_DIR
or $TARGET_BUILD_DIR
then replace them "$PROJECT_DIR"
or "$TARGET_BUILD_DIR"
respectively.After adding quotes my script ran successfully.
In command mode (press Esc if you are not sure) you can use:
On Fedora 29 with Wireshark 3.0.0 only adding a user to the wireshark group is required:
sudo usermod -a -G wireshark $USER
Then log out and log back in (or reboot), and Wireshark should work correctly.
That is perfectly acceptable, probably even the standard.
(public/private) static final TYPE NAME = VALUE;
where TYPE
is the type, NAME
is the name in all caps with underscores for spaces, and VALUE
is the constant value;
I highly recommend NOT putting your constants in their own classes or interfaces.
As a side note: Variables that are declared final and are mutable can still be changed; however, the variable can never point at a different object.
For example:
public static final Point ORIGIN = new Point(0,0);
public static void main(String[] args){
ORIGIN.x = 3;
}
That is legal and ORIGIN
would then be a point at (3, 0).
sort ip_addresses | uniq -c
This will print the count first, but other than that it should be exactly what you want.
Use the REPLACE function.
eg: SELECT REPLACE ('t?es?t', '?', 'w');
//OnClick Listener
@Override
public void onClick(View v) {
String webUrl = news.getNewsURL();
if(webUrl!="")
Utils.intentWebURL(mContext, webUrl);
}
//Your Util Method
public static void intentWebURL(Context context, String url) {
if (!url.startsWith("http://") && !url.startsWith("https://")) {
url = "http://" + url;
}
boolean flag = isURL(url);
if (flag) {
Intent browserIntent = new Intent(Intent.ACTION_VIEW,
Uri.parse(url));
context.startActivity(browserIntent);
}
}
Use the make_response method to get a response with your data. Then set the mimetype attribute. Finally return this response:
@app.route('/ajax_ddl')
def ajax_ddl():
xml = 'foo'
resp = app.make_response(xml)
resp.mimetype = "text/xml"
return resp
If you use Response
directly, you lose the chance to customize the responses by setting app.response_class
. The make_response
method uses the app.responses_class
to make the response object. In this you can create your own class, add make your application uses it globally:
class MyResponse(app.response_class):
def __init__(self, *args, **kwargs):
super(MyResponse, self).__init__(*args, **kwargs)
self.set_cookie("last-visit", time.ctime())
app.response_class = MyResponse
The implode() function returns a string from the elements of an array.
<?php
$arr = array('Hello','World!','Beautiful','Day!');
echo implode(" ",$arr);
?>
Output: Hello World! Beautiful Day!
<?php
$arr = array('Hello','World!','Beautiful','Day!');
echo implode("|",$arr);
?>
Output: Hello|World!|Beautiful|Day!
I would prefer not use Count function at all:
IF [NOT] EXISTS ( SELECT 1 FROM MyTable WHERE ... )
<do smth>
For example if you want to check if user exists before inserting it into the database the query can look like this:
IF NOT EXISTS ( SELECT 1 FROM Users WHERE FirstName = 'John' AND LastName = 'Smith' )
BEGIN
INSERT INTO Users (FirstName, LastName) VALUES ('John', 'Smith')
END
MySQL create function syntax:
DELIMITER //
CREATE FUNCTION GETFULLNAME(fname CHAR(250),lname CHAR(250))
RETURNS CHAR(250)
BEGIN
DECLARE fullname CHAR(250);
SET fullname=CONCAT(fname,' ',lname);
RETURN fullname;
END //
DELIMITER ;
Use This Function In Your Query
SELECT a.*,GETFULLNAME(a.fname,a.lname) FROM namedbtbl as a
SELECT GETFULLNAME("Biswarup","Adhikari") as myname;
Watch this Video how to create mysql function and how to use in your query
you can use altsoft xml2pdf lib for this
Greedy matching. The default behavior of regular expressions is to be greedy. That means it tries to extract as much as possible until it conforms to a pattern even when a smaller part would have been syntactically sufficient.
Example:
import re
text = "<body>Regex Greedy Matching Example </body>"
re.findall('<.*>', text)
#> ['<body>Regex Greedy Matching Example </body>']
Instead of matching till the first occurrence of ‘>’, it extracted the whole string. This is the default greedy or ‘take it all’ behavior of regex.
Lazy matching, on the other hand, ‘takes as little as possible’. This can be effected by adding a ?
at the end of the pattern.
Example:
re.findall('<.*?>', text)
#> ['<body>', '</body>']
If you want only the first match to be retrieved, use the search method instead.
re.search('<.*?>', text).group()
#> '<body>'
Source: Python Regex Examples
I did this:
$('#myModal').on 'shown.bs.modal', (e) ->
$(e.target).find('.modal-body').load('http://yourserver.com/content')
According to the jQuery Plugin Authoring page (http://docs.jquery.com/Plugins/Authoring), it's best not to muddy up the jQuery and jQuery.fn namespaces. They suggest this method:
(function( $ ){
var methods = {
init : function(options) {
},
show : function( ) { },// IS
hide : function( ) { },// GOOD
update : function( content ) { }// !!!
};
$.fn.tooltip = function(methodOrOptions) {
if ( methods[methodOrOptions] ) {
return methods[ methodOrOptions ].apply( this, Array.prototype.slice.call( arguments, 1 ));
} else if ( typeof methodOrOptions === 'object' || ! methodOrOptions ) {
// Default to "init"
return methods.init.apply( this, arguments );
} else {
$.error( 'Method ' + methodOrOptions + ' does not exist on jQuery.tooltip' );
}
};
})( jQuery );
Basically you store your functions in an array (scoped to the wrapping function) and check for an entry if the parameter passed is a string, reverting to a default method ("init" here) if the parameter is an object (or null).
Then you can call the methods like so...
$('div').tooltip(); // calls the init method
$('div').tooltip({ // calls the init method
foo : 'bar'
});
$('div').tooltip('hide'); // calls the hide method
$('div').tooltip('update', 'This is the new tooltip content!'); // calls the update method
Javascripts "arguments" variable is an array of all the arguments passed so it works with arbitrary lengths of function parameters.
stmt.setDate(1, new java.sql.Date(cal.getTime().getTime()));
I was getting this error due to something even simpler (you could even say trivial). I hadn't installed the pytest
module. So a simple apt install python-pytest
fixed it for me.
'pytest' would have been listed in setup.py as a test dependency. Make sure you install the test requirements as well.
Another answer, probably faster :)
distribution = [(1, 0.2), (2, 0.3), (3, 0.5)]
# init distribution
dlist = []
sumchance = 0
for value, chance in distribution:
sumchance += chance
dlist.append((value, sumchance))
assert sumchance == 1.0 # not good assert because of float equality
# get random value
r = random.random()
# for small distributions use lineair search
if len(distribution) < 64: # don't know exact speed limit
for value, sumchance in dlist:
if r < sumchance:
return value
else:
# else (not implemented) binary search algorithm
Just need to add: new SimpleDateFormat("bla bla bla", Locale.US)
public static void main(String[] args) throws ParseException {
java.util.Date fecha = new java.util.Date("Mon Dec 15 00:00:00 CST 2014");
DateFormat formatter = new SimpleDateFormat("EEE MMM dd HH:mm:ss Z yyyy", Locale.US);
Date date;
date = (Date)formatter.parse(fecha.toString());
System.out.println(date);
Calendar cal = Calendar.getInstance();
cal.setTime(date);
String formatedDate = cal.get(Calendar.DATE) + "/" +
(cal.get(Calendar.MONTH) + 1) +
"/" + cal.get(Calendar.YEAR);
System.out.println("formatedDate : " + formatedDate);
}
convert number string to array, split by decimal point. Then, if the array has only one value, that means no decimal in string.
if(!number.split(".")[1]){
//do stuff
}
This way you can also know what the integer and decimal actually are. a more advanced example would be.
number_to_array = string.split(".");
inte = number_to_array[0];
dece = number_to_array[1];
if(!dece){
//do stuff
}
\
is used for escape sequences in programming languages.
\n
prints a newline
\\
prints a backslash
\"
prints "
\t
prints a tabulator
\b
moves the cursor one back
You can use this code, this code is for AES-256-CBC or you can use it for other AES encryption. Key length error mainly comes in 256-bit encryption.
This error comes due to the encoding or charset name we pass in the SecretKeySpec. Suppose, in my case, I have a key length of 44, but I am not able to encrypt my text using this long key; Java throws me an error of invalid key length. Therefore I pass my key as a BASE64 in the function, and it converts my 44 length key in the 32 bytes, which is must for the 256-bit encryption.
import javax.crypto.Cipher;
import javax.crypto.spec.IvParameterSpec;
import javax.crypto.spec.SecretKeySpec;
import java.security.MessageDigest;
import java.security.Security;
import java.util.Base64;
public class Encrypt {
static byte [] arr = {1,2,3,4,5,6,7,8,9};
// static byte [] arr = new byte[16];
public static void main(String...args) {
try {
// System.out.println(Cipher.getMaxAllowedKeyLength("AES"));
Base64.Decoder decoder = Base64.getDecoder();
// static byte [] arr = new byte[16];
Security.setProperty("crypto.policy", "unlimited");
String key = "Your key";
// System.out.println("-------" + key);
String value = "Hey, i am adnan";
String IV = "0123456789abcdef";
// System.out.println(value);
// log.info(value);
IvParameterSpec iv = new IvParameterSpec(IV.getBytes());
// IvParameterSpec iv = new IvParameterSpec(arr);
// System.out.println(key);
SecretKeySpec skeySpec = new SecretKeySpec(decoder.decode(key), "AES");
// System.out.println(skeySpec);
Cipher cipher = Cipher.getInstance("AES/CBC/PKCS5Padding");
// System.out.println("ddddddddd"+IV);
cipher.init(Cipher.ENCRYPT_MODE, skeySpec, iv);
// System.out.println(cipher.getIV());
byte[] encrypted = cipher.doFinal(value.getBytes());
String encryptedString = Base64.getEncoder().encodeToString(encrypted);
System.out.println("encrypted string,,,,,,,,,,,,,,,,,,,: " + encryptedString);
// vars.put("input-1",encryptedString);
// log.info("beanshell");
}catch (Exception e){
System.out.println(e.getMessage());
}
}
}
Oracle
's locking concept is quite different from that of the other systems.
When a row in Oracle
gets locked, the record itself is updated with the new value (if any) and, in addition, a lock (which is essentially a pointer to transaction lock that resides in the rollback segment) is placed right into the record.
This means that locking a record in Oracle
means updating the record's metadata and issuing a logical page write. For instance, you cannot do SELECT FOR UPDATE
on a read only tablespace.
More than that, the records themselves are not updated after commit: instead, the rollback segment is updated.
This means that each record holds some information about the transaction that last updated it, even if the transaction itself has long since died. To find out if the transaction is alive or not (and, hence, if the record is alive or not), it is required to visit the rollback segment.
Oracle does not have a traditional lock manager, and this means that obtaining a list of all locks requires scanning all records in all objects. This would take too long.
You can obtain some special locks, like locked metadata objects (using v$locked_object
), lock waits (using v$session
) etc, but not the list of all locks on all objects in the database.
You can also include this HTML in ReactDOM like this:
var thisIsMyCopy = (<p>copy copy copy <strong>strong copy</strong></p>);
ReactDOM.render(<div className="content">{thisIsMyCopy}</div>, document.getElementById('app'));
Here are two links link and link2 from React documentation which could be helpful.
A Docker container runs a process (the "command" or "entrypoint") that keeps it alive. The container will continue to run as long as the command continues to run.
In your case, the command (/bin/bash
, by default, on centos:latest
) is exiting immediately (as bash does when it's not connected to a terminal and has nothing to run).
Normally, when you run a container in daemon mode (with -d
), the container is running some sort of daemon process (like httpd
). In this case, as long as the httpd daemon is running, the container will remain alive.
What you appear to be trying to do is to keep the container alive without a daemon process running inside the container. This is somewhat strange (because the container isn't doing anything useful until you interact with it, perhaps with docker exec
), but there are certain cases where it might make sense to do something like this.
(Did you mean to get to a bash prompt inside the container? That's easy! docker run -it centos:latest
)
A simple way to keep a container alive in daemon mode indefinitely is to run sleep infinity
as the container's command. This does not rely doing strange things like allocating a TTY in daemon mode. Although it does rely on doing strange things like using sleep
as your primary command.
$ docker run -d centos:latest sleep infinity
$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
d651c7a9e0ad centos:latest "sleep infinity" 2 seconds ago Up 2 seconds nervous_visvesvaraya
As indicated by cjsimon, the -t
option allocates a "pseudo-tty". This tricks bash into continuing to run indefinitely because it thinks it is connected to an interactive TTY (even though you have no way to interact with that particular TTY if you don't pass -i
). Anyway, this should do the trick too:
$ docker run -t -d centos:latest
Not 100% sure whether -t
will produce other weird interactions; maybe leave a comment below if it does.
There's an entire discussion of libraries for converting Word to PDF on Joel's discussion forums. Some suggestions from the thread:
Use a table variable if for a very small quantity of data (thousands of bytes)
Use a temporary table for a lot of data
Another way to think about it: if you think you might benefit from an index, automated statistics, or any SQL optimizer goodness, then your data set is probably too large for a table variable.
In my example, I just wanted to put about 20 rows into a format and modify them as a group, before using them to UPDATE / INSERT a permanent table. So a table variable is perfect.
But I am also running SQL to back-fill thousands of rows at a time, and I can definitely say that the temporary tables perform much better than table variables.
This is not unlike how CTE's are a concern for a similar size reason - if the data in the CTE is very small, I find a CTE performs as good as or better than what the optimizer comes up with, but if it is quite large then it hurts you bad.
My understanding is mostly based on http://www.developerfusion.com/article/84397/table-variables-v-temporary-tables-in-sql-server/, which has a lot more detail.
Use Jquery functions
<Button id="myPselector" data-id="1234">HI</Button>
console.log($("#myPselector").attr('data-id'));
Regarding Wolfwyrd's anwer: "On Error Resume Next" in fact turns error handling off! Not on. On Error Goto 0 turns error-handling back ON because at the least, we want the machine to catch it if we didn't write it in ourselves. Off = leaving it to you to handle it.
If you use On Error Resume Next, you need to be careful about how much code you include after it: remember, the phrase "If Err.Number <> 0 Then" only refers to the most previous error triggered.
If your block of code after "On Error Resume Next" has several places where you might reasonably expect it to fail, then you must place "If Err.number <> 0" after each and every one of those possible failure lines, to check execution.
Otherwise, after "on error resume next" means just what it says - your code can fail on as many lines as it likes and execution will continue merrily along. That's why it's a pain in the ass.
Update: This answer is outdated as newer versions of libraries mentioned are released since then.
Socket.IO v0.9 is outdated and a bit buggy, and Engine.IO is the interim successor. Socket.IO v1.0 (which will be released soon) will use Engine.IO and be much better than v0.9. I'd recommend you to use Engine.IO until Socket.IO v1.0 is released.
"ws" does not support fallback, so if the client browser does not support websockets, it won't work, unlike Socket.IO and Engine.IO which uses long-polling etc if websockets are not available. However, "ws" seems like the fastest library at the moment.
See my article comparing Socket.IO, Engine.IO and Primus: https://medium.com/p/b63bfca0539
res.sendFile( __dirname + "/public/" + "index1.html" );
where __dirname
will manage the name of the directory that the currently executing script ( server.js
) resides in.
The basename
function should give you what you want:
Given a string containing a path to a file, this function will return the base name of the file.
For instance, quoting the manual's page:
<?php
$path = "/home/httpd/html/index.php";
$file = basename($path); // $file is set to "index.php"
$file = basename($path, ".php"); // $file is set to "index"
?>
Or, in your case:
$full = 'F:\Program Files\SSH Communications Security\SSH Secure Shell\Output.map';
var_dump(basename($full));
You'll get:
string(10) "Output.map"
In Ubuntu, you need to uncomment this line in file php.ini which is located at /etc/php/7.0/apache2/php.ini:
extension=php_mysqli.so
As mentioned here: Re: BUG #4243: Idle in transaction it is probably best to check your pg_locks table to see what is being locked and that might give you a better clue where the problem lies.
Yes, in order for the z-index
to work, you'll need to give the element a position: absolute
or a position: relative
property.
You have to go up the nodes of the elements to check if at the level of the common parent the first descendants have a defined z-index.
All other descendants can never be in the foreground if at the base there is a lower definite z-index
.
In this snippet example, div1-2-1
has a z-index
of 1000 but is nevertheless under the div1-1-1
which has a z-index of 3.
This is because div1-1 has a z-index greater than div1-2.
.div {
}
#div1 {
z-index: 1;
position: absolute;
width: 500px;
height: 300px;
border: 1px solid black;
}
#div1-1 {
z-index: 2;
position: absolute;
left: 230px;
width: 200px;
height: 200px;
top: 31px;
background-color: indianred;
}
#div1-1-1 {
z-index: 3;
position: absolute;
top: 50px;
width: 100px;
height: 100px;
background-color: burlywood;
}
#div1-2 {
z-index: 1;
position: absolute;
width: 200px;
height: 200px;
left: 80px;
top: 5px;
background-color: red;
}
#div1-2-1 {
z-index: 1000;
position: absolute;
left: 70px;
width: 120px;
height: 100px;
top: 10px;
color: red;
background-color: lightyellow;
}
.blink {
animation: blinker 1s linear infinite;
}
@keyframes blinker {
50% {
opacity: 0;
}
}
.rotate {
writing-mode: vertical-rl;
padding-left: 50px;
font-weight: bold;
font-size: 20px;
}
_x000D_
<div class="div" id="div1">div1</br>z-index: 1
<div class="div" id="div1-1">div1-1</br>z-index: 2
<div class="div" id="div1-1-1">div1-1-1</br>z-index: 3</div>
</div>
<div class="div" id="div1-2">div1-2</br>z-index: 1</br><span class='rotate blink'><=</span>
<div class="div" id="div1-2-1"><span class='blink'>z-index: 1000!!</span></br>div1-2-1</br><span class='blink'> because =></br>(same</br> parent)</span></div>
</div>
</div>
_x000D_
In order to complete BlueM's accepted answer, you can desactivate it here:
Tools > Options > Debugging > General Output Settings > Thread Exit Messages : Off
Just create a file my.ini file in installation dir and have the below config as part of this file to solve this permanently.
[mysql]
user=root
password=root
try
console.log($("#"+d));
your solution is passing the double quotes as part of the string.
Use block level buttons, those that span the full width of a parent
You can achieve this by adding btn-block
class your button element.
Documentation here
As Peter says, they won't be in Maven Central
from the Android SDK Manager download the 'Android Support Repository' and a Maven repo of the support libraries will be downloaded to your Android SDK directory (see 'extras' folder)
to deploy the libraries to your local .m2 repository you can use maven-android-sdk-deployer
2017 edit:
you can now reference the Google online M2 repo
repositories {
google()
jcenter()
}
you need the libblas and liblapack dev packages if you are using Ubuntu.
aptitude install libblas-dev liblapack-dev
pip install scipy
Here is a very simple way to do this (using SQL 2012 or later)
datefromparts(year(getdate()),month(getdate()),1)
you can also easily get the last day of the month using
eomonth(getdate())
This is one solution, though since APIs change over time and there may be other ways of doing it, make sure to check the other answers. One claims to be faster, and another claims to be easier.
private int getRelativeLeft(View myView) {
if (myView.getParent() == myView.getRootView())
return myView.getLeft();
else
return myView.getLeft() + getRelativeLeft((View) myView.getParent());
}
private int getRelativeTop(View myView) {
if (myView.getParent() == myView.getRootView())
return myView.getTop();
else
return myView.getTop() + getRelativeTop((View) myView.getParent());
}
Let me know if that works.
It should recursively just add the top and left positions from each parent container.
You could also implement it with a Point
if you wanted.
jQuery added a :focus
selector so we no longer need to add it ourselves. Just use $("..").is(":focus")
Edit: As times change, we find better methods for testing focus, the new favorite is this gist from Ben Alman:
jQuery.expr[':'].focus = function( elem ) {
return elem === document.activeElement && ( elem.type || elem.href );
};
Quoted from Mathias Bynens here:
Note that the
(elem.type || elem.href)
test was added to filter out false positives like body. This way, we make sure to filter out all elements except form controls and hyperlinks.
You're defining a new selector. See Plugins/Authoring. Then you can do:
if ($("...").is(":focus")) {
...
}
or:
$("input:focus").doStuff();
If you just want to figure out which element has focus, you can use
$(document.activeElement)
If you aren't sure if the version will be 1.6 or lower, you can add the :focus
selector if it is missing:
(function ( $ ) {
var filters = $.expr[":"];
if ( !filters.focus ) {
filters.focus = function( elem ) {
return elem === document.activeElement && ( elem.type || elem.href );
};
}
})( jQuery );
C++ style casts are checked by the compiler. C style casts aren't and can fail at runtime.
Also, c++ style casts can be searched for easily, whereas it's really hard to search for c style casts.
Another big benefit is that the 4 different C++ style casts express the intent of the programmer more clearly.
When writing C++ I'd pretty much always use the C++ ones over the the C style.
Here's a minor update with new models:
- (NSString *) platformString{
NSString *platform = [self platform];
if ([platform isEqualToString:@"iPhone1,1"]) return @"iPhone 1G";
if ([platform isEqualToString:@"iPhone1,2"]) return @"iPhone 3G";
if ([platform isEqualToString:@"iPhone2,1"]) return @"iPhone 3GS";
if ([platform isEqualToString:@"iPhone3,1"]) return @"iPhone 4";
if ([platform isEqualToString:@"iPod1,1"]) return @"iPod Touch 1G";
if ([platform isEqualToString:@"iPod2,1"]) return @"iPod Touch 2G";
if ([platform isEqualToString:@"iPod3,1"]) return @"iPod Touch 3G";
if ([platform isEqualToString:@"i386"]) return @"iPhone Simulator";
return platform;
}
Try using the duplicated function in combination with the negation operator "!".
Example:
wdups <- rep(1:5,5)
wodups <- wdups[which(!duplicated(wdups))]
Hope that helps.
You can try
echo implode(', ', (array)$ret);
I would recommend %20
.
Are you hard-coding them?
This is not very consistent across languages, though.
If I'm not mistaken, in PHP urlencode()
treats spaces as +
whereas Python's urlencode()
treats them as %20
.
EDIT:
It seems I'm mistaken. Python's urlencode()
(at least in 2.7.2) uses quote_plus()
instead of quote()
and thus encodes spaces as "+".
It seems also that the W3C recommendation is the "+" as per here: http://www.w3.org/TR/html4/interact/forms.html#h-17.13.4.1
And in fact, you can follow this interesting debate on Python's own issue tracker about what to use to encode spaces: http://bugs.python.org/issue13866.
EDIT #2:
I understand that the most common way of encoding " " is as "+", but just a note, it may be just me, but I find this a bit confusing:
import urllib
print(urllib.urlencode({' ' : '+ '})
>>> '+=%2B+'
I had a similar error -
time data '01-07-2020' does not match format '%d%m%Y' (match)
I didn't know that I have to use a hyphen in the format parameter. This worked for me -
df['Date'] = pd.to_datetime(df['Date'], format='%d-%m-%Y')
I used this code and it works just fine
const int margin = 5;
Rectangle rect = new Rectangle(
Screen.PrimaryScreen.WorkingArea.X + margin,
Screen.PrimaryScreen.WorkingArea.Y + margin,
Screen.PrimaryScreen.WorkingArea.Width - 2 * margin,
Screen.PrimaryScreen.WorkingArea.Height - 2 * (margin - 7));
this.Bounds = rect;
One simple thing you could do is abstract the test inside a function.
local function isempty(s)
return s == nil or s == ''
end
if isempty(foo) then
foo = "default value"
end
If you are looking for a "live view of the object your are working with " when you hover over and all you see is the name make sure you place a break point on the method you are testing on. Otherwise when you hover over you will only get the method name.
Anyways I hope this helps someone. I tried all the above steps which are great! but I still could not view the object I was working with live. It may just be rookie mistake.
Best of luck!
SayntLewis is right. When you activate the camera with cvCaptureFromCAM, the auto white balance is not yet adjusted (it's a slow process), so you may get a mostly white or mostly black (depends on the camera and your lightning conditions) on the first frames. The same happens when there's a sudden change of the lightning of the scene. Just wait some time after opening the camera, flush the buffer and you're ready to go.
The problem is that your regex is a string, but html
is bytes:
>>> type(html)
<class 'bytes'>
Since python doesn't know how those bytes are encoded, it throws an exception when you try to use a string regex on them.
You can either decode
the bytes to a string:
html = html.decode('ISO-8859-1') # encoding may vary!
title = re.findall(pattern, html) # no more error
Or use a bytes regex:
regex = rb'<title>(,+?)</title>'
# ^
In this particular context, you can get the encoding from the response headers:
with urllib.request.urlopen(url) as response:
encoding = response.info().get_param('charset', 'utf8')
html = response.read().decode(encoding)
See the urlopen
documentation for more details.
create an empty modal box on the current page and below is the ajax call you can see how to fetch the content in result from another html page.
$.ajax({url: "registration.html", success: function(result){
//alert("success"+result);
$("#contentBody").html(result);
$("#myModal").modal('show');
}});
once the call is done you will get the content of the page by the result to then you can insert the code in you modal's content id using.
You can call controller and get the page content and you can show that in your modal.
below is the example of Bootstrap 3 modal in that we are loading content from registration.html page...
index.html
------------------------------------------------
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css">
<script src="https://ajax.googleapis.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>
<script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js"></script>
<script type="text/javascript">
function loadme(){
//alert("loadig");
$.ajax({url: "registration.html", success: function(result){
//alert("success"+result);
$("#contentBody").html(result);
$("#myModal").modal('show');
}});
}
</script>
</head>
<body>
<!-- Trigger the modal with a button -->
<button type="button" class="btn btn-info btn-lg" onclick="loadme()">Load me</button>
<!-- Modal -->
<div id="myModal" class="modal fade" role="dialog">
<div class="modal-dialog">
<!-- Modal content-->
<div class="modal-content" >
<div class="modal-header">
<button type="button" class="close" data-dismiss="modal">×</button>
<h4 class="modal-title">Modal Header</h4>
</div>
<div class="modal-body" id="contentBody">
</div>
<div class="modal-footer">
<button type="button" class="btn btn-default" data-dismiss="modal">Close</button>
</div>
</div>
</div>
</div>
</body>
</html>
registration.html
--------------------
<!DOCTYPE html>
<html>
<style>
body {font-family: Arial, Helvetica, sans-serif;}
form {
border: 3px solid #f1f1f1;
font-family: Arial;
}
.container {
padding: 20px;
background-color: #f1f1f1;
width: 560px;
}
input[type=text], input[type=submit] {
width: 100%;
padding: 12px;
margin: 8px 0;
display: inline-block;
border: 1px solid #ccc;
box-sizing: border-box;
}
input[type=checkbox] {
margin-top: 16px;
}
input[type=submit] {
background-color: #4CAF50;
color: white;
border: none;
}
input[type=submit]:hover {
opacity: 0.8;
}
</style>
<body>
<h2>CSS Newsletter</h2>
<form action="/action_page.php">
<div class="container">
<h2>Subscribe to our Newsletter</h2>
<p>Lorem ipsum text about why you should subscribe to our newsletter blabla. Lorem ipsum text about why you should subscribe to our newsletter blabla.</p>
</div>
<div class="container" style="background-color:white">
<input type="text" placeholder="Name" name="name" required>
<input type="text" placeholder="Email address" name="mail" required>
<label>
<input type="checkbox" checked="checked" name="subscribe"> Daily Newsletter
</label>
</div>
<div class="container">
<input type="submit" value="Subscribe">
</div>
</form>
</body>
</html>
static void Main()
{
for (int i=0; i<GetNames().Length; i++)
{
Console.WriteLine (GetNames()[i]);
}
}
static string[] GetNames()
{
string[] ret = {"Answer", "by", "Anonymous", "Pakistani"};
return ret;
}
The value
attribute on submit
-type <input>
elements controls the text displayed.
<input type="submit" class="like" value="Like" />
Really depends on what you're trying to do. Types are documentation in typescript, so you want to show intention about how this thing is supposed to be used when you're creating the type.
Make all attributes optional
type User = {
attr0?: number
attr1?: string
}
type User = {
...
}
let u1: User = null;
Though, really, here if the point is to declare the User object before it can be known what will be assigned to it, you probably want to do let u1:User
without any assignment.
Really, the premise of typescript is to make sure that you are conforming to the mental model you outline in types in order to avoid making mistakes. If you want to add things to an object one-by-one, this is a habit that TypeScript is trying to get you not to do.
More likely, you want to make some local variables, then assign to the User-containing variable when it's ready to be a full-on User. That way you'll never be left with a partially-formed User. Those things are gross.
let attr1: number = ...
let attr2: string = ...
let user1: User = {
attr1: attr1,
attr2: attr2
}
It seems that window.onerror
doesn't provide access to all possible errors. Specifically it ignores:
<img>
loading errors (response >= 400).<script>
loading errors (response >= 400).window.onerror
in an unknown way (jquery, angular, etc.).Here is the start of a script that catches many of these errors, so that you may add more robust debugging to your app during development.
(function(){
/**
* Capture error data for debugging in web console.
*/
var captures = [];
/**
* Wait until `window.onload`, so any external scripts
* you might load have a chance to set their own error handlers,
* which we don't want to override.
*/
window.addEventListener('load', onload);
/**
* Custom global function to standardize
* window.onerror so it works like you'd think.
*
* @see http://www.quirksmode.org/dom/events/error.html
*/
window.onanyerror = window.onanyerror || onanyerrorx;
/**
* Hook up all error handlers after window loads.
*/
function onload() {
handleGlobal();
handleXMLHttp();
handleImage();
handleScript();
handleEvents();
}
/**
* Handle global window events.
*/
function handleGlobal() {
var onerrorx = window.onerror;
window.addEventListener('error', onerror);
function onerror(msg, url, line, col, error) {
window.onanyerror.apply(this, arguments);
if (onerrorx) return onerrorx.apply(null, arguments);
}
}
/**
* Handle ajax request errors.
*/
function handleXMLHttp() {
var sendx = XMLHttpRequest.prototype.send;
window.XMLHttpRequest.prototype.send = function(){
handleAsync(this);
return sendx.apply(this, arguments);
};
}
/**
* Handle image errors.
*/
function handleImage() {
var ImageOriginal = window.Image;
window.Image = ImageOverride;
/**
* New `Image` constructor. Might cause some problems,
* but not sure yet. This is at least a start, and works on chrome.
*/
function ImageOverride() {
var img = new ImageOriginal;
onnext(function(){ handleAsync(img); });
return img;
}
}
/**
* Handle script errors.
*/
function handleScript() {
var HTMLScriptElementOriginal = window.HTMLScriptElement;
window.HTMLScriptElement = HTMLScriptElementOverride;
/**
* New `HTMLScriptElement` constructor.
*
* Allows us to globally override onload.
* Not ideal to override stuff, but it helps with debugging.
*/
function HTMLScriptElementOverride() {
var script = new HTMLScriptElement;
onnext(function(){ handleAsync(script); });
return script;
}
}
/**
* Handle errors in events.
*
* @see http://stackoverflow.com/questions/951791/javascript-global-error-handling/31750604#31750604
*/
function handleEvents() {
var addEventListenerx = window.EventTarget.prototype.addEventListener;
window.EventTarget.prototype.addEventListener = addEventListener;
var removeEventListenerx = window.EventTarget.prototype.removeEventListener;
window.EventTarget.prototype.removeEventListener = removeEventListener;
function addEventListener(event, handler, bubble) {
var handlerx = wrap(handler);
return addEventListenerx.call(this, event, handlerx, bubble);
}
function removeEventListener(event, handler, bubble) {
handler = handler._witherror || handler;
removeEventListenerx.call(this, event, handler, bubble);
}
function wrap(fn) {
fn._witherror = witherror;
function witherror() {
try {
fn.apply(this, arguments);
} catch(e) {
window.onanyerror.apply(this, e);
throw e;
}
}
return fn;
}
}
/**
* Handle image/ajax request errors generically.
*/
function handleAsync(obj) {
var onerrorx = obj.onerror;
obj.onerror = onerror;
var onabortx = obj.onabort;
obj.onabort = onabort;
var onloadx = obj.onload;
obj.onload = onload;
/**
* Handle `onerror`.
*/
function onerror(error) {
window.onanyerror.call(this, error);
if (onerrorx) return onerrorx.apply(this, arguments);
};
/**
* Handle `onabort`.
*/
function onabort(error) {
window.onanyerror.call(this, error);
if (onabortx) return onabortx.apply(this, arguments);
};
/**
* Handle `onload`.
*
* For images, you can get a 403 response error,
* but this isn't triggered as a global on error.
* This sort of standardizes it.
*
* "there is no way to get the HTTP status from a
* request made by an img tag in JavaScript."
* @see http://stackoverflow.com/questions/8108636/how-to-get-http-status-code-of-img-tags/8108646#8108646
*/
function onload(request) {
if (request.status && request.status >= 400) {
window.onanyerror.call(this, request);
}
if (onloadx) return onloadx.apply(this, arguments);
}
}
/**
* Generic error handler.
*
* This shows the basic implementation,
* which you could override in your app.
*/
function onanyerrorx(entity) {
var display = entity;
// ajax request
if (entity instanceof XMLHttpRequest) {
// 400: http://example.com/image.png
display = entity.status + ' ' + entity.responseURL;
} else if (entity instanceof Event) {
// global window events, or image events
var target = entity.currentTarget;
display = target;
} else {
// not sure if there are others
}
capture(entity);
console.log('[onanyerror]', display, entity);
}
/**
* Capture stuff for debugging purposes.
*
* Keep them in memory so you can reference them
* in the chrome debugger as `onanyerror0` up to `onanyerror99`.
*/
function capture(entity) {
captures.push(entity);
if (captures.length > 100) captures.unshift();
// keep the last ones around
var i = captures.length;
while (--i) {
var x = captures[i];
window['onanyerror' + i] = x;
}
}
/**
* Wait til next code execution cycle as fast as possible.
*/
function onnext(fn) {
setTimeout(fn, 0);
}
})();
It could be used like this:
window.onanyerror = function(entity){
console.log('some error', entity);
};
The full script has a default implementation that tries to print out a semi-readable "display" version of the entity/error that it receives. Can be used for inspiration for an app-specific error handler. The default implementation also keeps a reference to the last 100 error entities, so you can inspect them in the web console after they occur like:
window.onanyerror0
window.onanyerror1
...
window.onanyerror99
Note: This works by overriding methods on several browser/native constructors. This can have unintended side-effects. However, it has been useful to use during development, to figure out where errors are occurring, to send logs to services like NewRelic or Sentry during development so we can measure errors during development, and on staging so we can debug what is going on at a deeper level. It can then be turned off in production.
Hope this helps.
Where you want to set your location? you can use mapkit api to show u location's. see icodeblog.com for more detail on how to use mapkit. Also you can store your desired cordinates just create an object CLLocation2D *location; location.longitude=your desired longitude value; location.latitude=your desired latitude value;
Use this in your my.ini
under
[mysqldump]
user=root
password=anything
I'm a little confused. "foo.html" is just the name of your template. There's no inherent relationship between the route name "foo" and the template name "foo.html".
To achieve the goal of not rewriting logic code for two different routes, I would just define a function and call that for both routes. I wouldn't use redirect because that actually redirects the client/browser which requires them to load two pages instead of one just to save you some coding time - which seems mean :-P
So maybe:
def super_cool_logic():
# execute common code here
@app.route("/foo")
def do_foo():
# do some logic here
super_cool_logic()
return render_template("foo.html")
@app.route("/baz")
def do_baz():
if some_condition:
return render_template("baz.html")
else:
super_cool_logic()
return render_template("foo.html", messages={"main":"Condition failed on page baz"})
I feel like I'm missing something though and there's a better way to achieve what you're trying to do (I'm not really sure what you're trying to do)
$ alias gpuom='git push origin master'
$ alias
hit Enter.$ vim ~/.bashrc
and hit Enter (I'm guessing you are familiar with vim).#My custom aliases
alias gpuom='git push origin master'
alias gplom='git pull origin master'
$ alias
hit Enter.There is nothing wrong with the example you have given. But i must say i believe it's not efficient to store function definitions in a cpp file. I only understand the need to separate the function's declaration and definition.
When used together with explicit class instantiation, the Boost Concept Check Library (BCCL) can help you generate template function code in cpp files.
There is a file called config.inc.php in the phpmyadmin folder.
The file path is C:\wamp\apps\phpmyadmin4.0.4
Edit The auth_type 'cookie' to 'config' or 'http'
$cfg['Servers'][$i]['auth_type'] = 'cookie';
$cfg['Servers'][$i]['auth_type'] = 'config';
or
$cfg['Servers'][$i]['auth_type'] = 'http';
When you go to the phpmyadmin site then you will be asked for the username and password. This also secure external people from accessing your phpmyadmin application if you happen to have your web server exposed to outside connections.
You also need to change the DataSource
of the connection string. KELVIN-PC
is the name of your local machine and the sql server is running on the default instance.
If you are sure the the server is running as the default instance, you can always use .
in the DataSource, eg.
connectionString="Data Source=.;Initial Catalog=LMS;User ID=sa;Password=temperament"
otherwise, you need to specify the name of the instance of the server,
connectionString="Data Source=.\INSTANCENAME;Initial Catalog=LMS;User ID=sa;Password=temperament"
If you want to put a .gitignore file at the top level and make it work for any folder below it use /**/
.
E.g. to ignore all *.map
files in a /src/main/
folder and sub-folders use:
/src/main/**/*.map
Urm, all of the answers so far have been wrong with Rook's answer being correct.
Entering:
echo 0 | sudo tee /proc/sys/kernel/randomize_va_space
Followed by:
gcc -fno-stack-protector -z execstack -o bug bug.c
Disables ASLR, SSP/Propolice and Ubuntu's NoneXec (which was placed in 9.10, and fairly simple to work around see the mprotect(2) technique to map pages as executable and jmp) should help a little, however these "security features" are by no means infallible. Without the `-z execstack' flag, pages have non-executable stack markings.
War -
distribute Java-based web applications. A WAR has the same file structure as a JAR file, which is a single compressed file that contains multiple files bundled inside it.
Jar -
The .jar files contain libraries, resources and accessories files like property files.
WAR files are used to combine JSPs, servlets, Java class files, XML files, javascript libraries, JAR libraries, static web pages, and any other resources needed to run the application.
While Large Text File Viewer works great for just looking at a large file (and is free!), if the file is either a delimited or fixed-width file, then you should check out File Query. Not only can it open a file of any size (I have personally opened a 280GB file, but it can go larger), but it lets you query the file as though it was in a database as well, finding out any sort of information you could want from it.
It is not free though, so it is more for people that work with large files a lot, but if you have a one-off problem, you can just use the 30-day trial for free.
I had the same issue and none of the above answers solved the problem, so I tried something very straight-forward: I just putted in my strings.xml
\n\t
The complete String looks like this <string name="premium_features_listing_3">- Automatische Aktualisierung der\n\tDatenbank</string>
Results in:
Automatische Aktualisierung der
Datenbank
(with no extra line in between)
Maybe it will help others. Regards
If you do not have float exceptions enabled (which you shouldn't imho), you can simply say:
double neg_inf = -1/0.0;
This yields negative infinity. If you need a float, you can either cast the result
float neg_inf = (float)-1/0.0;
or use single precision arithmetic
float neg_inf = -1.0f/0.0f;
The result is always the same, there is exactly one representation of negative infinity in both single and double precision, and they convert to each other as you would expect.
I know this was asked awhile back, but I found a comprehensive list of the virtual keyboard key codes right in MSDN, for use in C/C++. This also includes the mouse events. Note it is different than the javascript key codes (I noticed it around the VK_OEM section).
Here's the link:
http://msdn.microsoft.com/en-us/library/windows/desktop/dd375731(v=vs.85).aspx
You need to give a function to be called after the time delay as the second argument to after
:
after(delay_ms, callback=None, *args)
Registers an alarm callback that is called after a given time.
So what you really want to do is this:
tiles_letter = ['a', 'b', 'c', 'd', 'e']
def add_letter():
rand = random.choice(tiles_letter)
tile_frame = Label(frame, text=rand)
tile_frame.pack()
root.after(500, add_letter)
tiles_letter.remove(rand) # remove that tile from list of tiles
root.after(0, add_letter) # add_letter will run as soon as the mainloop starts.
root.mainloop()
You also need to schedule the function to be called again by repeating the call to after
inside the callback function, since after
only executes the given function once. This is also noted in the documentation:
The callback is only called once for each call to this method. To keep calling the callback, you need to reregister the callback inside itself
Note that your example will throw an exception as soon as you've exhausted all the entries in tiles_letter
, so you need to change your logic to handle that case whichever way you want. The simplest thing would be to add a check at the beginning of add_letter
to make sure the list isn't empty, and just return
if it is:
def add_letter():
if not tiles_letter:
return
rand = random.choice(tiles_letter)
tile_frame = Label(frame, text=rand)
tile_frame.pack()
root.after(500, add_letter)
tiles_letter.remove(rand) # remove that tile from list of tiles
Live-Demo: repl.it
I'll try to answer several key points: this is from long Hibernate/ persistence experience including several major applications.
Entity Class: implement Serializable?
Keys needs to implement Serializable. Stuff that's going to go in the HttpSession, or be sent over the wire by RPC/Java EE, needs to implement Serializable. Other stuff: not so much. Spend your time on what's important.
Constructors: create a constructor with all required fields of the entity?
Constructor(s) for application logic, should have only a few critical "foreign key" or "type/kind" fields which will always be known when creating the entity. The rest should be set by calling the setter methods -- that's what they're for.
Avoid putting too many fields into constructors. Constructors should be convenient, and give basic sanity to the object. Name, Type and/or Parents are all typically useful.
OTOH if application rules (today) require a Customer to have an Address, leave that to a setter. That is an example of a "weak rule". Maybe next week, you want to create a Customer object before going to the Enter Details screen? Don't trip yourself up, leave possibility for unknown, incomplete or "partially entered" data.
Constructors: also, package private default constructor?
Yes, but use 'protected' rather than package private. Subclassing stuff is a real pain when the necessary internals are not visible.
Fields/Properties
Use 'property' field access for Hibernate, and from outside the instance. Within the instance, use the fields directly. Reason: allows standard reflection, the simplest & most basic method for Hibernate, to work.
As for fields 'immutable' to the application -- Hibernate still needs to be able to load these. You could try making these methods 'private', and/or put an annotation on them, to prevent application code making unwanted access.
Note: when writing an equals() function, use getters for values on the 'other' instance! Otherwise, you'll hit uninitialized/ empty fields on proxy instances.
Protected is better for (Hibernate) performance?
Unlikely.
Equals/HashCode?
This is relevant to working with entities, before they've been saved -- which is a thorny issue. Hashing/comparing on immutable values? In most business applications, there aren't any.
A customer can change address, change the name of their business, etc etc -- not common, but it happens. Corrections also need to be possible to make, when the data was not entered correctly.
The few things that are normally kept immutable, are Parenting and perhaps Type/Kind -- normally the user recreates the record, rather than changing these. But these do not uniquely identify the entity!
So, long and short, the claimed "immutable" data isn't really. Primary Key/ ID fields are generated for the precise purpose, of providing such guaranteed stability & immutability.
You need to plan & consider your need for comparison & hashing & request-processing work phases when A) working with "changed/ bound data" from the UI if you compare/hash on "infrequently changed fields", or B) working with "unsaved data", if you compare/hash on ID.
Equals/HashCode -- if a unique Business Key is not available, use a non-transient UUID which is created when the entity is initialized
Yes, this is a good strategy when required. Be aware that UUIDs are not free, performance-wise though -- and clustering complicates things.
Equals/HashCode -- never refer to related entities
"If related entity (like a parent entity) needs to be part of the Business Key then add a non insertable, non updatable field to store the parent id (with the same name as the ManytoOne JoinColumn) and use this id in the equality check"
Sounds like good advice.
Hope this helps!
Use the method "getCenterCoordinate" to obtain the center coordinate and use in CameraPosition.
private void setUpMap() {
mMap.setMyLocationEnabled(true);
mMap.getUiSettings().setScrollGesturesEnabled(true);
mMap.getUiSettings().setTiltGesturesEnabled(true);
mMap.getUiSettings().setRotateGesturesEnabled(true);
clientMarker = mMap.addMarker(new MarkerOptions()
.position(new LatLng(Double.valueOf(-12.1024174), Double.valueOf(-77.0262274)))
.icon(BitmapDescriptorFactory.fromResource(R.mipmap.ic_taxi))
);
clientMarker = mMap.addMarker(new MarkerOptions()
.position(new LatLng(Double.valueOf(-12.1024637), Double.valueOf(-77.0242617)))
.icon(BitmapDescriptorFactory.fromResource(R.mipmap.ic_location))
);
camPos = new CameraPosition.Builder()
.target(getCenterCoordinate())
.zoom(17)
.build();
camUpd3 = CameraUpdateFactory.newCameraPosition(camPos);
mMap.animateCamera(camUpd3);
}
public LatLng getCenterCoordinate(){
LatLngBounds.Builder builder = new LatLngBounds.Builder();
builder.include(new LatLng(Double.valueOf(-12.1024174), Double.valueOf(-77.0262274)));
builder.include(new LatLng(Double.valueOf(-12.1024637), Double.valueOf(-77.0242617)));
LatLngBounds bounds = builder.build();
return bounds.getCenter();
}
All that's needed is that the format specifiers and the types agree, and you can always cast to make that true. long
is at least 32 bits, so %lu
together with (unsigned long)k
is always correct:
uint32_t k;
printf("%lu\n", (unsigned long)k);
size_t
is trickier, which is why %zu
was added in C99. If you can't use that, then treat it just like k
(long
is the biggest type in C89, size_t
is very unlikely to be larger).
size_t sz;
printf("%zu\n", sz); /* C99 version */
printf("%lu\n", (unsigned long)sz); /* common C89 version */
If you don't get the format specifiers correct for the type you are passing, then printf
will do the equivalent of reading too much or too little memory out of the array. As long as you use explicit casts to match up types, it's portable.
I'm writing an answer only because I do not have enough reputations to comment the accepted answer from apsillers. I agree with his answer, but
If you really want to test if a variable is undeclared, you'll need to catch the ReferenceError ...
is not the only way. One can do just:
this.hasOwnProperty("bar")
to check if there is a variable bar declared in the current context. (I'm not sure, but calling the hasOwnProperty could also be more fast/effective than raising an exception) This works only for the current context (not for the whole current scope).
twod_list = [[foo for _ in range(m)] for _ in range(n)]
for n is number of rows, and m is the number of column, and foo is the value.
Not very technical answer but just letting you know.
For easy stuff like printing you can define a sort of function in your preprocessors like
#define print(x) cout << x << endl
You should find that the following schema allows the what you have proposed.
<xs:element name="foo">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:choice>
<xs:element maxOccurs="unbounded" name="child1" type="xs:unsignedByte" />
<xs:element maxOccurs="unbounded" name="child2" type="xs:string" />
</xs:choice>
</xs:sequence>
</xs:complexType>
</xs:element>
This will allow you to create a file such as:
<?xml version="1.0" encoding="utf-8" ?>
<foo>
<child1>2</child1>
<child1>3</child1>
<child2>test</child2>
<child2>another-test</child2>
</foo>
Which seems to match your question.
In case there are any morons out there like me, I had this frustrating problem because I forgot a simple
new
keyword before instantiating a new object.
I know this already has a marked answer, but I feel I have an improvement to it.
The marked answer is a bit misleading. He set a width to the button, which is not necessary, and set widths are not "responsive". To his defense, he mentions in a comment below it, that the width is not necessary and just an example.
One thing not mentioned here, is that the words may break in the middle of a word and look messed up.
My solution, forces the break to happen between words, a nice word wrap.
.btn-responsive {
white-space: normal !important;
word-wrap: break-word;
}
<a href="#" class="btn btn-primary btn-responsive">Click Here</a>
document.getElementsByClassName("classstringhere").length
The document.getElementsByClassName("classstringhere")
method returns an array of all the elements with that class name, so .length
gives you the amount of them.
Check the unsaved values for your primary key/Object ID in your hbm files. If you have automated ID creation by hibernate framework and you are setting the ID somewhere it will throw this error.By default the unsaved value is 0, so if you set the ID to 0 you will see this error.
Use a TreeMap, although having a map "look like that" is a bit nebulous--you could also just sort the keys based on your criteria and iterate over the map, retrieving each object.
Check your server config file /etc/mysql/my.cnf
- verify bind_address
is not set to 127.0.0.1
. Set it to 0.0.0.0
or comment it out then restart server with:
sudo service mysql restart
By design adb root
command works in development builds only (i.e. eng
and userdebug
which have ro.debuggable=1
by default). So to enable the adb root
command on your otherwise rooted device just add the ro.debuggable=1
line to one of the following files:
/system/build.prop
/system/default.prop
/data/local.prop
If you want adb shell
to start as root
by default - then add ro.secure=0
as well.
Alternatively you could use modified adbd
binary (which does not check for ro.debuggable
)
From https://android.googlesource.com/platform/system/core/+/master/adb/daemon/main.cpp
#if defined(ALLOW_ADBD_ROOT)
// The properties that affect `adb root` and `adb unroot` are ro.secure and
// ro.debuggable. In this context the names don't make the expected behavior
// particularly obvious.
//
// ro.debuggable:
// Allowed to become root, but not necessarily the default. Set to 1 on
// eng and userdebug builds.
//
// ro.secure:
// Drop privileges by default. Set to 1 on userdebug and user builds.
There are three ways to do it,
a) using a service
b) Exploiting depending parent/child relation between controller scopes.
c) In Angular 2.0 "As" keyword will be pass the data from one controller to another.
For more information with example, Please check the below link:
Use the in
keyword.
if 'apples' in d:
if d['apples'] == 20:
print('20 apples')
else:
print('Not 20 apples')
If you want to get the value only if the key exists (and avoid an exception trying to get it if it doesn't), then you can use the get
function from a dictionary, passing an optional default value as the second argument (if you don't pass it it returns None
instead):
if d.get('apples', 0) == 20:
print('20 apples.')
else:
print('Not 20 apples.')
For what it's worth, for Gecko-based browsers you can't condition this thing off of :visited
due to the resulting privacy leaks. See http://hacks.mozilla.org/2010/03/privacy-related-changes-coming-to-css-vistited/
Unless you can get PHP to label that element with a class you are better to use jQuery.
jQuery(document).ready(function () {
$count = jQuery("ul li").size() - 1;
alert($count);
jQuery("ul li:nth-child("+$count+")").css("color","red");
});
Your loading of the JSON data is a little fragile. Instead of:
json_raw= raw.readlines()
json_object = json.loads(json_raw[0])
you should really just do:
json_object = json.load(raw)
You shouldn't think of what you get as a "JSON object". What you have is a list. The list contains two dicts. The dicts contain various key/value pairs, all strings. When you do json_object[0]
, you're asking for the first dict in the list. When you iterate over that, with for song in json_object[0]:
, you iterate over the keys of the dict. Because that's what you get when you iterate over the dict. If you want to access the value associated with the key in that dict, you would use, for example, json_object[0][song]
.
None of this is specific to JSON. It's just basic Python types, with their basic operations as covered in any tutorial.
From Wikipedia:
In computer programming, boilerplate is the term used to describe sections of code that have to be included in many places with little or no alteration. It is more often used when referring to languages that are considered verbose, i.e. the programmer must write a lot of code to do minimal jobs.
So basically you can consider boilerplate code as a text that is needed by a programming language very often all around the programs you write in that language.
Modern languages are trying to reduce it, but also the older language which has specific type-checkers (for example OCaml has a type-inferrer that allows you to avoid so many declarations that would be boilerplate code in a more verbose language like Java)
I think this is pretty obvious :
Keep in mind : both the function has two arguments,
$observe/$watch(value : string, callback : function);
function (oldValue, newValue)
I have made a plunker, so you can actually get a grasp on both their utilization. I have used the Chameleon analogy as to make it easier to picture.
The above Answer solves our problem but in addition to that. if we are trying to decompress a uncompressed("not a zip format") byte[] . we will get "Not in GZIP format" exception message.
For solving that we can add addition code in our Class.
public static boolean isCompressed(final byte[] compressed) {
return (compressed[0] == (byte) (GZIPInputStream.GZIP_MAGIC)) && (compressed[1] == (byte) (GZIPInputStream.GZIP_MAGIC >> 8));
}
My Complete Compression Class with compress/decompress would look like:
import java.io.BufferedReader;
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.InputStreamReader;
import java.util.zip.GZIPInputStream;
import java.util.zip.GZIPOutputStream;
public class GZIPCompression {
public static byte[] compress(final String str) throws IOException {
if ((str == null) || (str.length() == 0)) {
return null;
}
ByteArrayOutputStream obj = new ByteArrayOutputStream();
GZIPOutputStream gzip = new GZIPOutputStream(obj);
gzip.write(str.getBytes("UTF-8"));
gzip.flush();
gzip.close();
return obj.toByteArray();
}
public static String decompress(final byte[] compressed) throws IOException {
final StringBuilder outStr = new StringBuilder();
if ((compressed == null) || (compressed.length == 0)) {
return "";
}
if (isCompressed(compressed)) {
final GZIPInputStream gis = new GZIPInputStream(new ByteArrayInputStream(compressed));
final BufferedReader bufferedReader = new BufferedReader(new InputStreamReader(gis, "UTF-8"));
String line;
while ((line = bufferedReader.readLine()) != null) {
outStr.append(line);
}
} else {
outStr.append(compressed);
}
return outStr.toString();
}
public static boolean isCompressed(final byte[] compressed) {
return (compressed[0] == (byte) (GZIPInputStream.GZIP_MAGIC)) && (compressed[1] == (byte) (GZIPInputStream.GZIP_MAGIC >> 8));
}
}
This is an alternative for those who need to export a dynamically named variable
export {
[someVariable]: 'some value',
[anotherVariable]: 'another value',
}
// then.... import from another file like this:
import * as vars from './some-file'
Another alternative is to simply create an object whose keys are named dynamically
const vars = { [someVariable]: 1, [otherVariable]: 2 };
// consume it like this
vars[someVariable];
I was having this problem on a Windows 7 (64 bit) after a power outage. The SQLEXPRESS service was not started even though is status was set to 'Automatic' and the mahine had been rebooted several times. Had to start the service manually.
I have found a weird problem with .gitignore. Everything was in place and seemed correct. The only reason why my .gitignore was "ignored" was, that the line-ending was in Mac-Format (\r). So after saving the file with the correct line-ending (in vi using :set ff=unix) everything worked like a charm!
Some of these points have been addressed above, but here's my 2-cents for VS2008 environment.
RDL (Remote reports): Much better development experience, more flexibility if you need to use some advanced features like scheduling, ad-hoc reporting, etc...
RDLC (Local reports): Better control over the data before sending it to the report (easier to validate or manipulate the data prior to sending it to the report). Much easier deployment, no need for an instance of Reporting Services.
One HUGE caveat with local reports is a known memory leak that can severely affect performance if your clients will be running numerous large reports. This is supposed to be addressed with the new VS2010 version of the report viewer.
In my case, since we have an instance of Reporting Services available, I develop new reports as RDLs and then convert them to local reports (which is easy) and deploy them as local reports.
Use percent encoding. Modern browsers will take care of display & paste issues and make it human-readable. E. g. http://ko.wikipedia.org/wiki/????:??
Edit: when you copy such an url in Firefox, the clipboard will hold the percent-encoded form (which is usually a good thing), but if you copy only a part of it, it will remain unencoded.
Default is:
Username: root
Password: [null]
The Password is set to 'password' in some versions.