Some extend
functions in third party libraries are more complex than others. Knockout.js for instance contains a minimally simple one that doesn't have some of the checks that jQuery's does:
function extend(target, source) {
if (source) {
for(var prop in source) {
if(source.hasOwnProperty(prop)) {
target[prop] = source[prop];
}
}
}
return target;
}
Writing the properties file with multiple comments is not supported. Why ?
PropertyFile.java
public class PropertyFile extends Task {
/* ========================================================================
*
* Instance variables.
*/
// Use this to prepend a message to the properties file
private String comment;
private Properties properties;
The ant property file task is backed by a java.util.Properties
class which stores comments using the store() method. Only one comment is taken from the task and that is passed on to the Properties
class to save into the file.
The way to get around this is to write your own task that is backed by commons properties instead of java.util.Properties
. The commons properties file is backed by a property layout which allows settings comments for individual keys in the properties file. Save the properties file with the save() method and modify the new task to accept multiple comments through <comment>
elements.
What causes a "broken pipe", and more importantly, is it possible to recover from that state?
It is caused by something causing the connection to close. (It is not your application that closed the connection: that would have resulted in a different exception.)
It is not possible to recover the connection. You need to open a new one.
If it cannot be recovered, it seems this would be a good sign that an irreversible problem has occurred and that I should simply close this socket connection. Is that a reasonable assumption?
Yes it is. Once you've received that exception, the socket won't ever work again. Closing it is is the only sensible thing to do.
Is there ever a time when this
IOException
would occur while the socket connection is still being properly connected in the first place (rather than a working connection that failed at some point)?
No. (Or at least, not without subverting proper behavior of the OS'es network stack, the JVM and/or your application.)
Is it wise to always call
SocketChannel.isConnected()
before attempting aSocketChannel.write()
...
In general, it is a bad idea to call r.isXYZ()
before some call that uses the (external) resource r
. There is a small chance that the state of the resource will change between the two calls. It is a better idea to do the action, catch the IOException
(or whatever) resulting from the failed action and take whatever remedial action is required.
In this particular case, calling isConnected()
is pointless. The method is defined to return true
if the socket was connected at some point in the past. It does not tell you if the connection is still live. The only way to determine if the connection is still alive is to attempt to use it; e.g. do a read or write.
You don't need to bind the submit event on the click of the submit button just bind the submit event and it will capture the submit event no mater how it gets triggered.
Think what you are wanting is to submit the sortable like you would via ajax. Try doing something like this:
var form = $('#event').submit(function () {
$.each($('#attendance').sortable('toArray'),function(i, value){
$("<input>").attr({
'type':'hidden',
'name':'attendace['+i+']'
}).val(value).appendTo(form);
});
});
Be careful if you have to deal with large numbers.
int[] arr = new int[]{Integer.MIN_VALUE, Integer.MIN_VALUE};
long sum = Arrays.stream(arr).sum(); // Wrong: sum == 0
The sum above is not 2 * Integer.MIN_VALUE
.
You need to do this in this case.
long sum = Arrays.stream(arr).mapToLong(Long::valueOf).sum(); // Correct
I have SQL 2017 installed and this issue happens when the free trial / evaluation period ends, the solution to the problem is the following:
1 - Go to the windows start button, find the Microsoft SQL Server 20XX folder
2- Then, SQL Server 20XX Installation Center
3- On the left, select the option "Maintenance"
4- Then click on “Edition upgrade”
5- Then in the combox select "developer" option, and then click on “next” button
6- Click on the option "I accept the license terms" and then next
7- Finally, click on "Next" and click on "Upgrade", and wait approximately 15 minutes.
8- After this, restart the SQL Server service in "Services.msc" and open SQL again, it should work. For more information: watch this video: https://www.youtube.com/watch?v=EVG35ahhjec
If your intention is test the service without care about the rest call, I will suggest to not use any annotation in your unit test to simplify the test.
So, my suggestion is refactor your service to receive the resttemplate using injection constructor. This will facilitate the test. Example:
@Service
class SomeService {
@AutoWired
SomeService(TestTemplateObjects restTemplateObjects) {
this.restTemplateObjects = restTemplateObjects;
}
}
The RestTemplate as component, to be injected and mocked after:
@Component
public class RestTemplateObjects {
private final RestTemplate restTemplate;
public RestTemplateObjects () {
this.restTemplate = new RestTemplate();
// you can add extra setup the restTemplate here, like errorHandler or converters
}
public RestTemplate getRestTemplate() {
return restTemplate;
}
}
And the test:
public void test() {
when(mockedRestTemplateObject.get).thenReturn(mockRestTemplate);
//mock restTemplate.exchange
when(mockRestTemplate.exchange(...)).thenReturn(mockedResponseEntity);
SomeService someService = new SomeService(mockedRestTemplateObject);
someService.getListofObjectsA();
}
In this way, you have direct access to mock the rest template by the SomeService constructor.
Code:
^([0-9]*[1-9][0-9]*(\.[0-9]+)?|[0]+\.[0-9]*[1-9][0-9]*)$
Example: http://regexr.com/3anf5
jQuery's id
selector only returns one result. The descendant
and multiple
selectors in the second and third statements are designed to select multiple elements. It's similar to:
Statement 1
var length = document.getElementById('a').length;
...Yields one result.
Statement 2
var length = 0;
for (i=0; i<document.body.childNodes.length; i++) {
if (document.body.childNodes.item(i).id == 'a') {
length++;
}
}
...Yields two results.
Statement 3
var length = document.getElementById('a').length + document.getElementsByTagName('div').length;
...Also yields two results.
using System.Net.NetworkInformation;
public static bool PingHost(string nameOrAddress)
{
bool pingable = false;
Ping pinger = null;
try
{
pinger = new Ping();
PingReply reply = pinger.Send(nameOrAddress);
pingable = reply.Status == IPStatus.Success;
}
catch (PingException)
{
// Discard PingExceptions and return false;
}
finally
{
if (pinger != null)
{
pinger.Dispose();
}
}
return pingable;
}
I used this (after RUN apt-get install -y python3
):
RUN apt-get install -y locales
RUN apt-get install -y language-pack-en
ENV LANG en_US.UTF-8
ENV LANGUAGE en_US:en
ENV LC_ALL en_US.UTF-8
RUN python3 -c "print('UTF8 works nice! ')"
And it prints UTF8 works nice!
correctly.
Also consider Int16. If you need to store an Integer in memory in your application and you are concerned about the amount of memory used, then you could go with Int16 since it uses less memeory and has a smaller min/max range than Int32 (which is what int is.)
Use sorted()
with a key
as follows -
>>> unsorted_list = [['a','b','c','5','d'],['e','f','g','3','h'],['i','j','k','4','m']]
>>> sorted(unsorted_list, key = lambda x: int(x[3]))
[['e', 'f', 'g', '3', 'h'], ['i', 'j', 'k', '4', 'm'], ['a', 'b', 'c', '5', 'd']]
The lambda
returns the fourth element of each of the inner lists and the sorted
function uses that to sort those list. This assumes that int(elem)
will not fail for the list.
Or use itemgetter
(As Ashwini's comment pointed out, this method would not work if you have string representations of the numbers, since they are bound to fail somewhere for 2+ digit numbers)
>>> from operator import itemgetter
>>> sorted(unsorted_list, key = itemgetter(3))
[['e', 'f', 'g', '3', 'h'], ['i', 'j', 'k', '4', 'm'], ['a', 'b', 'c', '5', 'd']]
Android MediaPlayer doesn't support streaming of MP3 natively until 2.2. In older versions of the OS it appears to only stream 3GP natively. You can try the pocketjourney code, although it's old (there's a new version here) and I had trouble making it sticky — it would stutter whenever it refilled the buffer.
The NPR News app for Android is open source and uses a local proxy server to handle MP3 streaming in versions of the OS before 2.2. You can see the relevant code in lines 199-216 (r94) here: http://code.google.com/p/npr-android-app/source/browse/Npr/src/org/npr/android/news/PlaybackService.java?r=7cf2352b5c3c0fbcdc18a5a8c67d836577e7e8e3
And this is the StreamProxy class: http://code.google.com/p/npr-android-app/source/browse/Npr/src/org/npr/android/news/StreamProxy.java?r=e4984187f45c39a54ea6c88f71197762dbe10e72
The NPR app is also still getting the "error (-38, 0)" sometimes while streaming. This may be a threading issue or a network change issue. Check the issue tracker for updates.
For those using ASP.NET MVC. You can use the RequireHttpsAttribute to force all responses to be HTTPS:
GlobalFilters.Filters.Add(new RequireHttpsAttribute());
Other things you may also want to do to help secure your site:
Force Anti-Forgery tokens to use SSL/TLS:
AntiForgeryConfig.RequireSsl = true;
Require Cookies to require HTTPS by default by changing the Web.config file:
<system.web>
<httpCookies httpOnlyCookies="true" requireSSL="true" />
</system.web>
Use the NWebSec.Owin NuGet package and add the following line of code to enable Strict Transport Security (HSTS) across the site. Don't forget to add the Preload directive below and submit your site to the HSTS Preload site. More information here and here. Note that if you are not using OWIN, there is a Web.config method you can read up on on the NWebSec site.
// app is your OWIN IAppBuilder app in Startup.cs
app.UseHsts(options => options.MaxAge(days: 720).Preload());
Use the NWebSec.Owin NuGet package and add the following line of code to enable Public Key Pinning (HPKP) across the site. More information here and here.
// app is your OWIN IAppBuilder app in Startup.cs
app.UseHpkp(options => options
.Sha256Pins(
"Base64 encoded SHA-256 hash of your first certificate e.g. cUPcTAZWKaASuYWhhneDttWpY3oBAkE3h2+soZS7sWs=",
"Base64 encoded SHA-256 hash of your second backup certificate e.g. M8HztCzM3elUxkcjR2S5P4hhyBNf6lHkmjAHKhpGPWE=")
.MaxAge(days: 30));
Include the https scheme in any URL's used. Content Security Policy (CSP) HTTP header and Subresource Integrity (SRI) do not play nice when you imit the scheme in some browsers. It is better to be explicit about HTTPS. e.g.
<script src="https://ajax.aspnetcdn.com/ajax/bootstrap/3.3.4/bootstrap.min.js">
</script>
Use the ASP.NET MVC Boilerplate Visual Studio project template to generate a project with all of this and much more built in. You can also view the code on GitHub.
Try this:
SELECT
od.Sku,
od.mf_item_number,
od.Qty,
od.Price,
s.SupplierId,
s.SupplierName,
s.DropShipFees,
si.Price as cost
FROM
OrderDetails od
INNER JOIN Supplier s on s.SupplierId = od.Mfr_ID
INNER JOIN Group_Master gm on gm.Sku = od.Sku
INNER JOIN Supplier_Item si on si.SKU = od.Sku and si.SupplierId = s.SupplierID
WHERE
od.invoiceid = '339740'
This will return multiple rows that are identical except for the cost
column. Look at the different cost values that are returned and figure out what is causing the different values. Then ask somebody which cost value they want, and add the criteria to the query that will select that cost.
You'll need AJAX if you want to update a part of your page without reloading the entire page.
main cshtml view
<div id="refTable">
<!-- partial view content will be inserted here -->
</div>
@Html.TextBox("yearSelect3", Convert.ToDateTime(tempItem3.Holiday_date).Year.ToString());
<button id="pY">PrevY</button>
<script>
$(document).ready(function() {
$("#pY").on("click", function() {
var val = $('#yearSelect3').val();
$.ajax({
url: "/Holiday/Calendar",
type: "GET",
data: { year: ((val * 1) + 1) }
})
.done(function(partialViewResult) {
$("#refTable").html(partialViewResult);
});
});
});
</script>
You'll need to add the fields I have omitted. I've used a <button>
instead of submit buttons because you don't have a form (I don't see one in your markup) and you just need them to trigger javascript on the client side.
The HolidayPartialView gets rendered into html and the jquery done
callback inserts that html fragment into the refTable div.
HolidayController Update action
[HttpGet]
public ActionResult Calendar(int year)
{
var dates = new List<DateTime>() { /* values based on year */ };
HolidayViewModel model = new HolidayViewModel {
Dates = dates
};
return PartialView("HolidayPartialView", model);
}
This controller action takes the year parameter and returns a list of dates using a strongly-typed view model instead of the ViewBag.
view model
public class HolidayViewModel
{
IEnumerable<DateTime> Dates { get; set; }
}
HolidayPartialView.csthml
@model Your.Namespace.HolidayViewModel;
<table class="tblHoliday">
@foreach(var date in Model.Dates)
{
<tr><td>@date.ToString("MM/dd/yyyy")</td></tr>
}
</table>
This is the stuff that gets inserted into your div.
You can use checkedTextView instead.
http://developer.android.com/reference/android/widget/CheckedTextView.html
Pls, check if DataGridComboBoxColumn xaml below would work for you:
<DataGridComboBoxColumn
SelectedValueBinding="{Binding CompanyID}"
DisplayMemberPath="Name"
SelectedValuePath="ID">
<DataGridComboBoxColumn.ElementStyle>
<Style TargetType="{x:Type ComboBox}">
<Setter Property="ItemsSource" Value="{Binding Path=DataContext.CompanyItems, RelativeSource={RelativeSource AncestorType={x:Type Window}}}" />
</Style>
</DataGridComboBoxColumn.ElementStyle>
<DataGridComboBoxColumn.EditingElementStyle>
<Style TargetType="{x:Type ComboBox}">
<Setter Property="ItemsSource" Value="{Binding Path=DataContext.CompanyItems, RelativeSource={RelativeSource AncestorType={x:Type Window}}}" />
</Style>
</DataGridComboBoxColumn.EditingElementStyle>
</DataGridComboBoxColumn>
Here you can find another solution for the problem you're facing: Using combo boxes with the WPF DataGrid
I don't think you can do it in one line of code. Try opening your activities with startActivityForResult. As the result you can pass something like a CLOSE_FLAG, which will inform your parent activity that its child activity has finished.
That said, you should probably read this answer.
Second Approach :
angular.module('myApp', [])
.controller('Ctrl1', ['$scope',
function($scope) {
$scope.prop1 = "First";
$scope.clickFunction = function() {
$scope.$broadcast('update_Ctrl2_controller', $scope.prop1);
};
}
])
.controller('Ctrl2', ['$scope',
function($scope) {
$scope.prop2 = "Second";
$scope.$on("update_Ctrl2_controller", function(event, prop) {
$scope.prop = prop;
$scope.both = prop + $scope.prop2;
});
}
])
Html :
<div ng-controller="Ctrl2">
<p>{{both}}</p>
</div>
<button ng-click="clickFunction()">Click</button>
For more details see plunker :
For those who still do not understand.
>>> a = iter(list(range(10)))
>>> for i in a:
... print(i)
... next(a)
...
0 # print(i) printed this
1 # next(a) printed this
2 # print(i) printed this
3 # next(a) printed this
4 # print(i) printed this
5 # next(a) printed this
6 # print(i) printed this
7 # next(a) printed this
8 # print(i) printed this
9 # next(a) printed this
As others have already said, next
increases the iterator by 1 as expected. Assigning its returned value to a variable doesn't magically changes its behaviour.
This error occurs because of missing some files and the main reason is "Composer"
First Run these commands in CMD
php -r "copy('https://getcomposer.org/installer', 'composer-setup.php');"
php -r "if (hash_file('sha384', 'composer-setup.php') === 'e0012edf3e80b6978849f5eff0d4b4e4c79ff1609dd1e613307e16318854d24ae64f26d17af3ef0bf7cfb710ca74755a') { echo 'Installer verified'; } else { echo 'Installer corrupt'; unlink('composer-setup.php'); } echo PHP_EOL;"
php composer-setup.php
php -r "unlink('composer-setup.php');"
Then
Create a New project
Example:
D:/Laravel_Projects/New_Project
laravel new New_Project
After that start the server using
php artisan serve
// Facebook SDK v5 for PHP
// https://developers.facebook.com/docs/php/gettingstarted/5.0.0
$fb = new Facebook\Facebook([
'app_id' => '{app-id}',
'app_secret' => '{app-secret}',
'default_graph_version' => 'v2.4',
]);
$fb->setDefaultAccessToken($_SESSION['facebook_access_token']);
$response = $fb->get('/me?locale=en_US&fields=name,email');
$userNode = $response->getGraphUser();
var_dump(
$userNode->getField('email'), $userNode['email']
);
You can construct java.util.Date on milliseconds. And then converted it to string with java.text.DateFormat.
The requests package has a very nice API for HTTP requests, adding a custom header works like this (source: official docs):
>>> import requests
>>> response = requests.get(
... 'https://website.com/id', headers={'Authorization': 'access_token myToken'})
If you don't want to use an external dependency, the same thing using urllib2 of the standard library looks like this (source: the missing manual):
>>> import urllib2
>>> response = urllib2.urlopen(
... urllib2.Request('https://website.com/id', headers={'Authorization': 'access_token myToken'})
You can use an array in the select() to define more columns and you can use the DB::raw() there with aliasing it to followers. Should look like this:
$query = DB::table('category_issue')
->select(array('issues.*', DB::raw('COUNT(issue_subscriptions.issue_id) as followers')))
->where('category_id', '=', 1)
->join('issues', 'category_issue.issue_id', '=', 'issues.id')
->left_join('issue_subscriptions', 'issues.id', '=', 'issue_subscriptions.issue_id')
->group_by('issues.id')
->order_by('followers', 'desc')
->get();
#include <algorithm>
std::reverse(str.begin(), str.end());
This is the simplest way in C++.
git push
or
git push server_name master
should do the trick, after you have made a commit to your local repository.
if((int)letter != 0) { }
From the Jquery docs: you specify the async option to be false to get a synchronous Ajax request. Then your callback can set some data before your mother function proceeds.
Here's what your code would look like if changed as suggested:
beforecreate: function(node,targetNode,type,to) {
jQuery.ajax({
url: url,
success: function(result) {
if(result.isOk == false)
alert(result.message);
},
async: false
});
}
this is because $.ajax is the only request type that you can set the asynchronousity for
Use below recursive function to make your child views visible or gone. First argument is your parent view and second argument decides if you want childs of parent view visible or gone. true = visible false = gone
private void layoutElemanlarininGorunumunuDegistir(View view, boolean gorunur_mu_olsun) {
ViewGroup view_group;
try {
view_group = (ViewGroup) view;
Sabitler.konsolaYazdir(TAG, "View ViewGroup imis!" + view.getId());
} catch (ClassCastException e) {
Sabitler.konsolaYazdir(TAG, "View ViewGroup degilmis!" + view.getId());
return;
}
int view_eleman_sayisi = view_group.getChildCount();
for (int i = 0; i < view_eleman_sayisi; i++) {
View view_group_eleman = view_group.getChildAt(i);
if (gorunur_mu_olsun) {
view_group_eleman.setVisibility(View.VISIBLE);
} else {
view_group_eleman.setVisibility(View.GONE);
}
layoutElemanlarininGorunumunuDegistir(view_group_eleman, gorunur_mu_olsun);
}
}
Setting "expires" to a past date is the standard way to delete a cookie.
Your problem is probably because the date format is not conventional. IE probably expects GMT only.
Convert the Date to String and do it with SimpleDateFormat.
SimpleDateFormat readFormat = new SimpleDateFormat("yyyy-MM-dd'T'HH:mm:ss");
readFormat.setTimeZone(TimeZone.getTimeZone("GMT" + timezoneOffset));
String dateStr = readFormat.format(date);
SimpleDateFormat writeFormat = new SimpleDateFormat("yyyy-MM-dd'T'HH:mm:ss");
Date date = writeFormat.parse(dateStr);
How about this?
(A=1 OR B=1 OR C=1)
AND NOT (A=1 AND B=1 AND C=1)
And if A, B and C can have null values you would need the following:
(A=1 OR B=1 OR C=1)
AND NOT ( (A=1 AND A is not null) AND (B=1 AND B is not null) AND (C=1 AND C is not null) )
This is scalable to larger number of fields and hence more applicable.
B business day frequency
C custom business day frequency (experimental)
D calendar day frequency
W weekly frequency
M month end frequency
SM semi-month end frequency (15th and end of month)
BM business month end frequency
CBM custom business month end frequency
MS month start frequency
SMS semi-month start frequency (1st and 15th)
BMS business month start frequency
CBMS custom business month start frequency
Q quarter end frequency
BQ business quarter endfrequency
QS quarter start frequency
BQS business quarter start frequency
A year end frequency
BA, BY business year end frequency
AS, YS year start frequency
BAS, BYS business year start frequency
BH business hour frequency
H hourly frequency
T, min minutely frequency
S secondly frequency
L, ms milliseconds
U, us microseconds
N nanoseconds
See the timeseries documentation. It includes a list of offsets (and 'anchored' offsets), and a section about resampling.
Note that there isn't a list of all the different how
options, because it can be any NumPy array function and any function that is available via groupby dispatching can be passed to how
by name.
The location of jfxrt.jar in JDK 1.8 (Windows) is:
C:\Program Files\Java\jdk1.8.0_05\jre\lib\ext\jfxrt.jar
It is just such simple as writing:
$('input[type=file]').val()
Anyway, I suggest using name or ID attribute to select your input. And with event, it should look like this:
$('input[type=file]').change(function(e){
$in=$(this);
$in.next().html($in.val());
});
Here is how you can create custom errors with completely identical to native Error
's behaviour. This technique works only in Chrome and node.js for now. I also wouldn't recommend to use it if you don't understand what it does.
Error.createCustromConstructor = (function() {
function define(obj, prop, value) {
Object.defineProperty(obj, prop, {
value: value,
configurable: true,
enumerable: false,
writable: true
});
}
return function(name, init, proto) {
var CustomError;
proto = proto || {};
function build(message) {
var self = this instanceof CustomError
? this
: Object.create(CustomError.prototype);
Error.apply(self, arguments);
Error.captureStackTrace(self, CustomError);
if (message != undefined) {
define(self, 'message', String(message));
}
define(self, 'arguments', undefined);
define(self, 'type', undefined);
if (typeof init == 'function') {
init.apply(self, arguments);
}
return self;
}
eval('CustomError = function ' + name + '() {' +
'return build.apply(this, arguments); }');
CustomError.prototype = Object.create(Error.prototype);
define(CustomError.prototype, 'constructor', CustomError);
for (var key in proto) {
define(CustomError.prototype, key, proto[key]);
}
Object.defineProperty(CustomError.prototype, 'name', { value: name });
return CustomError;
}
})();
As a reasult we get
/**
* name The name of the constructor name
* init User-defined initialization function
* proto It's enumerable members will be added to
* prototype of created constructor
**/
Error.createCustromConstructor = function(name, init, proto)
Then you can use it like this:
var NotImplementedError = Error.createCustromConstructor('NotImplementedError');
And use NotImplementedError
as you would Error
:
throw new NotImplementedError();
var err = new NotImplementedError();
var err = NotImplementedError('Not yet...');
And it will behave is expected:
err instanceof NotImplementedError // -> true
err instanceof Error // -> true
NotImplementedError.prototype.isPrototypeOf(err) // -> true
Error.prototype.isPrototypeOf(err) // -> true
err.constructor.name // -> NotImplementedError
err.name // -> NotImplementedError
err.message // -> Not yet...
err.toString() // -> NotImplementedError: Not yet...
err.stack // -> works fine!
Note, that error.stack
works absolutle correct and won't include NotImplementedError
constructor call (thanks to v8's Error.captureStackTrace()
).
Note. There is ugly eval()
. The only reason it is used is to get correct err.constructor.name
. If you don't need it, you can a bit simplify everything.
By default, Elasticsearch will re-assign shards to nodes dynamically. However, if you've disabled shard allocation (perhaps you did a rolling restart and forgot to re-enable it), you can re-enable shard allocation.
# v0.90.x and earlier
curl -XPUT 'localhost:9200/_settings' -d '{
"index.routing.allocation.disable_allocation": false
}'
# v1.0+
curl -XPUT 'localhost:9200/_cluster/settings' -d '{
"transient" : {
"cluster.routing.allocation.enable" : "all"
}
}'
Elasticsearch will then reassign shards as normal. This can be slow, consider raising indices.recovery.max_bytes_per_sec
and cluster.routing.allocation.node_concurrent_recoveries
to speed it up.
If you're still seeing issues, something else is probably wrong, so look in your Elasticsearch logs for errors. If you see EsRejectedExecutionException
your thread pools may be too small.
Finally, you can explicitly reassign a shard to a node with the reroute API.
# Suppose shard 4 of index "my-index" is unassigned, so you want to
# assign it to node search03:
curl -XPOST 'localhost:9200/_cluster/reroute' -d '{
"commands": [{
"allocate": {
"index": "my-index",
"shard": 4,
"node": "search03",
"allow_primary": 1
}
}]
}'
This code will have exactly the given amount of characters; filled with spaces or truncated on the right side:
private String leftpad(String text, int length) {
return String.format("%" + length + "." + length + "s", text);
}
private String rightpad(String text, int length) {
return String.format("%-" + length + "." + length + "s", text);
}
Nope, this is not possible at all. There is no provision for it in the mailto:
protocol, and it would be a gaping security hole if it were possible.
The best idea to send a file, but have the client send the E-Mail that I can think of is:
mailto:
link that contains the URL to the uploaded file in the message body I could do this with a custom attribute as follows.
[AuthorizeUser(AccessLevel = "Create")]
public ActionResult CreateNewInvoice()
{
//...
return View();
}
Custom Attribute class as follows.
public class AuthorizeUserAttribute : AuthorizeAttribute
{
// Custom property
public string AccessLevel { get; set; }
protected override bool AuthorizeCore(HttpContextBase httpContext)
{
var isAuthorized = base.AuthorizeCore(httpContext);
if (!isAuthorized)
{
return false;
}
string privilegeLevels = string.Join("", GetUserRights(httpContext.User.Identity.Name.ToString())); // Call another method to get rights of the user from DB
return privilegeLevels.Contains(this.AccessLevel);
}
}
You can redirect an unauthorised user in your custom AuthorisationAttribute
by overriding the HandleUnauthorizedRequest
method:
protected override void HandleUnauthorizedRequest(AuthorizationContext filterContext)
{
filterContext.Result = new RedirectToRouteResult(
new RouteValueDictionary(
new
{
controller = "Error",
action = "Unauthorised"
})
);
}
You shouldn't overload the templates with complex logic, it's a bad practice. Remember to always keep it simple!
The better approach would be to extract this logic into reusable function on your $rootScope
:
.run(function ($rootScope) {
$rootScope.inArray = function (item, array) {
return (-1 !== array.indexOf(item));
};
})
Then, use it in your template:
<li ng-class="{approved: inArray(jobSet, selectedForApproval)}"></li>
I think everyone will agree that this example is much more readable and maintainable.
It depends on the nature of your application. And, since you did not describe it in great detail, it is an impossible question to answer. I find Backbone to be the easiest, but I work in Angular all day. Performance is more up to the coder than the framework, in my opinion.
Are you doing heavy DOM manipulation? I would use jQuery and Backbone.
Very data driven app? Angular with its nice data binding.
Game programming? None - direct to canvas; maybe a game engine.
Does this work for you:
You find this dialog on the Home
ribbon, under the Styles
group, the Conditional Formatting
menu, New rule...
.
It is very simple, just add a property:
public string Value {
get { return textBox1.Text; }
set { textBox1.Text = value; }
}
Using the Text property is a bit trickier, the UserControl class intentionally hides it. You'll need to override the attributes to put it back in working order:
[Browsable(true), EditorBrowsable(EditorBrowsableState.Always), Bindable(true)]
[DesignerSerializationVisibility(DesignerSerializationVisibility.Visible)]
public override string Text {
get { return textBox1.Text; }
set { textBox1.Text = value; }
}
Firefox 48 Developer Tools
Allows you to turn off cache only when toolbox is open, which is perfect for web development:
https://stackoverflow.com/a/27397425/895245 has similar content, but positioning changed a bit since.
If you are looking for readability, I believe that this is that code:
print '%(kg).2f kg = %(lb).2f lb = %(gal).2f gal = %(l).2f l' % {
'kg': var1,
'lb': var2,
'gal': var3,
'l': var4,
}
They are completely equivalent when used with printf()
. Personally, I prefer %d
, it's used more often (should I say "it's the idiomatic conversion specifier for int
"?).
(One difference between %i
and %d
is that when used with scanf()
, then %d
always expects a decimal integer, whereas %i
recognizes the 0
and 0x
prefixes as octal and hexadecimal, but no sane programmer uses scanf()
anyway so this should not be a concern.)
The mysql_list_fields
function might interest you ; but, as the manual states :
This function is deprecated. It is preferable to use
mysql_query()
to issue a SQLSHOW COLUMNS FROM table [LIKE 'name']
statement instead.
You can also use a TextView and set the background image to what you wanted in the ImageView
. Furthermore if you were using the ImageView
as a button you can set it to click-able
Here is some basic code for a TextView
that shows an image with text on top of it.
<TextView
android:layout_width="fill_parent"
android:layout_height="fill_parent"
android:background="@drawable/your_image"
android:text="your text here" />
I encountered a problem like this and it turns out that I accidentally changed the permission of the var/cache folder. Just delete the cache folder so magento could automatically create the folder with the right permissions.
rm -rf root/var/cache
My usual policy is to have only one return statement at the end of a function unless the complexity of the code is greatly reduced by adding more. In fact, I'm rather a fan of Eiffel, which enforces the only one return rule by having no return statement (there's just a auto-created 'result' variable to put your result in).
There certainly are cases where code can be made clearer with multiple returns than the obvious version without them would be. One could argue that more rework is needed if you have a function that is too complex to be understandable without multiple return statements, but sometimes it's good to be pragmatic about such things.
Perl Core Language - Little Black Book - excellent reference!
Try this, first scale your image to required width and height, just pass your original bitmap, required width and required height to the following method and get scaled bitmap in return:
For example: Bitmap scaledBitmap = getScaledBitmap(originalBitmap, 250, 350);
private Bitmap getScaledBitmap(Bitmap b, int reqWidth, int reqHeight)
{
int bWidth = b.getWidth();
int bHeight = b.getHeight();
int nWidth = bWidth;
int nHeight = bHeight;
if(nWidth > reqWidth)
{
int ratio = bWidth / reqWidth;
if(ratio > 0)
{
nWidth = reqWidth;
nHeight = bHeight / ratio;
}
}
if(nHeight > reqHeight)
{
int ratio = bHeight / reqHeight;
if(ratio > 0)
{
nHeight = reqHeight;
nWidth = bWidth / ratio;
}
}
return Bitmap.createScaledBitmap(b, nWidth, nHeight, true);
}
Now just pass your scaled bitmap to the following method and get base64 string in return:
For example: String base64String = getBase64String(scaledBitmap);
private String getBase64String(Bitmap bitmap)
{
ByteArrayOutputStream baos = new ByteArrayOutputStream();
bitmap.compress(Bitmap.CompressFormat.JPEG, 100, baos);
byte[] imageBytes = baos.toByteArray();
String base64String = Base64.encodeToString(imageBytes, Base64.NO_WRAP);
return base64String;
}
To decode the base64 string back to bitmap image:
byte[] decodedByteArray = Base64.decode(base64String, Base64.NO_WRAP);
Bitmap decodedBitmap = BitmapFactory.decodeByteArray(decodedByteArray, 0, decodedString.length);
If the case is:
n=int(input())
Instead of -> for i in n: -> gives error- 'int' object is not iterable
Use -> for i in range(0,n): -> works fine..!
This is what I have done. (Adapt from all of your answers)
<input name="textbox1" type="text" id="txt1"/>
<input name="buttonExecute" onclick="execute(document.getElementById('txt1').value)" type="button" value="Execute" />
It works. Thanks to all of you. :)
Similar setup here and looks like it was just a bug in my code. At the start of my app I looked for the offending URL and this worked: echo '<html>test</html>'; exit();
In my case, turns out the problem was an uninitialized variable that only failed under peculiar circumstances.
Unfortunately, the file must be locked for updates unless you're using Office 2010 and SharePoint 2010 together. This means that only one user per time can edit a file. The locking and version tracking capabilities of SharePoint are excellent, and this makes it a great tool for the type of collaboration you're talking about, but you would have to split documents into multiple files in order to extend the amount that could be edited at a time. For instance, we sometimes unmerge documents into technical, requirements, and financials sections so that the 3 experts required for the review can work concurrently. We then merge when everyone is finished.
First of all, the easiest way to run things at startup is to add them to the file /etc/rc.local
.
Another simple way is to use @reboot
in your crontab. Read the cron manpage for details.
However, if you want to do things properly, in addition to adding a script to /etc/init.d
you need to tell ubuntu when the script should be run and with what parameters. This is done with the command update-rc.d
which creates a symlink from some of the /etc/rc*
directories to your script. So, you'd need to do something like:
update-rc.d yourscriptname start 2
However, real init scripts should be able to handle a variety of command line options and otherwise integrate to the startup process. The file /etc/init.d/README
has some details and further pointers.
.click()
does not work with Android (look at mozilla docs, at mobile section). You can trigger the click event with this method:
function fireClick(node){
if (document.createEvent) {
var evt = document.createEvent('MouseEvents');
evt.initEvent('click', true, false);
node.dispatchEvent(evt);
} else if (document.createEventObject) {
node.fireEvent('onclick') ;
} else if (typeof node.onclick == 'function') {
node.onclick();
}
}
From this post
UPDATE: Ruby 1.9.3 Kernel#rand
also accepts ranges
rand(a..b)
http://www.rubyinside.com/ruby-1-9-3-introduction-and-changes-5428.html
Converting to array may be too expensive, and it's unnecessary.
(a..b).to_a.sample
Or
[*a..b].sample
Standard in Ruby 1.8.7+.
Note: was named #choice in 1.8.7 and renamed in later versions.
But anyway, generating array need resources, and solution you already wrote is the best, you can do.
you can use send instead of sendFile so you wont face with error! this works will help you!
fs.readFile('public/index1.html',(err,data)=>{
if(err){
consol.log(err);
}else {
res.setHeader('Content-Type', 'application/pdf');
for telling browser that your response is type of PDF
res.setHeader('Content-Disposition', 'attachment; filename='your_file_name_for_client.pdf');
if you want that file open immediately on the same page after user download it.write 'inline' instead attachment in above code.
res.send(data)
I also get the same error in an ASP.NET application when I saved some unicode data (Hindi) in the Web.config file and saved it with "Unicode" encoding.
It fixed the error for me when I saved the Web.config file with "UTF-8" encoding.
Well, you can program it for yourself... It's not complicated...
String Inputstream2String (InputStream is) throws IOException
{
final int PKG_SIZE = 1024;
byte[] data = new byte [PKG_SIZE];
StringBuilder buffer = new StringBuilder(PKG_SIZE * 10);
int size;
size = is.read(data, 0, data.length);
while (size > 0)
{
String str = new String(data, 0, size);
buffer.append(str);
size = is.read(data, 0, data.length);
}
return buffer.toString();
}
You should stop the submit procedure by returning false on the onsubmit callback.
<script>
function checkRegistration(){
if(!form_valid){
alert('Given data is not correct');
return false;
}
return true;
}
</script>
<form onsubmit="return checkRegistration()"...
Here you have a fully working example. The form will submit only when you write google into input, otherwise it will return an error:
<script>
function checkRegistration(){
var form_valid = (document.getElementById('some_input').value == 'google');
if(!form_valid){
alert('Given data is incorrect');
return false;
}
return true;
}
</script>
<form onsubmit="return checkRegistration()" method="get" action="http://google.com">
Write google to go to google...<br/>
<input type="text" id="some_input" value=""/>
<input type="submit" value="google it"/>
</form>
You could create a helper function to take care of that:
/**
* Return string before needle if it exists.
*
* @param string $str
* @param mixed $needle
* @return string
*/
function str_before($str, $needle)
{
$pos = strpos($str, $needle);
return ($pos !== false) ? substr($str, 0, $pos) : $str;
}
Here's a use case:
$sing = 'My name is Luka. I live on the second floor.';
echo str_before($sing, '.'); // My name is Luka
You may try while loop as shown below;
def do1():
# Do something
def do2(x):
while x > 0:
do1()
x -= 1
do2(5)
Thus make call the do1 function 5 times.
I think this does what you are asking for:
webdeveloper.com - decimal to fraction
Width/height gets you a decimal, converted to a fraction with ":" in place of '/' gives you a "ratio".
To create a new Date object in node.js
, or JavaScript
in general, just call it’s initializer
var d = new Date();
var d = new Date(dateString);
var d = new Date(jsonDate);
var d = new Date(year, month, day);
var d = new Date(year, month, day, hour, minute, second, millisecond);
Remember that Date objects can only be instantiated by calling Date
or using it as a constructor; unlike other JavaScript object types, Date objects have no literal syntax
The JPanel
is actually only a container where you can put different elements in it (even other JPanels
). So in your case I would suggest one big JPanel
as some sort of main container for your window. That main panel you assign a Layout
that suits your needs ( here is an introduction to the layouts).
After you set the layout to your main panel you can add the paint panel and the other JPanels you want (like those with the text in it..).
JPanel mainPanel = new JPanel();
mainPanel.setLayout(new BoxLayout(mainPanel, BoxLayout.Y_AXIS));
JPanel paintPanel = new JPanel();
JPanel textPanel = new JPanel();
mainPanel.add(paintPanel);
mainPanel.add(textPanel);
This is just an example that sorts all sub panels vertically (Y-Axis). So if you want some other stuff at the bottom of your mainPanel (maybe some icons or buttons) that should be organized with another layout (like a horizontal layout), just create again a new JPanel as a container for all the other stuff and set setLayout(new BoxLayout(mainPanel, BoxLayout.X_AXIS)
.
As you will find out, the layouts are quite rigid and it may be difficult to find the best layout for your panels. So don't give up, read the introduction (the link above) and look at the pictures – this is how I do it :)
Or you can just use NetBeans to write your program. There you have a pretty easy visual editor (drag and drop) to create all sorts of Windows and Frames. (only understanding the code afterwards is ... tricky sometimes.)
Since there are some many people interested in this question, I wanted to provide a complete example of how to layout a JFrame to make it look like OP wants it to.
The class is called MyFrame and extends swings JFrame
public class MyFrame extends javax.swing.JFrame{
// these are the components we need.
private final JSplitPane splitPane; // split the window in top and bottom
private final JPanel topPanel; // container panel for the top
private final JPanel bottomPanel; // container panel for the bottom
private final JScrollPane scrollPane; // makes the text scrollable
private final JTextArea textArea; // the text
private final JPanel inputPanel; // under the text a container for all the input elements
private final JTextField textField; // a textField for the text the user inputs
private final JButton button; // and a "send" button
public MyFrame(){
// first, lets create the containers:
// the splitPane devides the window in two components (here: top and bottom)
// users can then move the devider and decide how much of the top component
// and how much of the bottom component they want to see.
splitPane = new JSplitPane();
topPanel = new JPanel(); // our top component
bottomPanel = new JPanel(); // our bottom component
// in our bottom panel we want the text area and the input components
scrollPane = new JScrollPane(); // this scrollPane is used to make the text area scrollable
textArea = new JTextArea(); // this text area will be put inside the scrollPane
// the input components will be put in a separate panel
inputPanel = new JPanel();
textField = new JTextField(); // first the input field where the user can type his text
button = new JButton("send"); // and a button at the right, to send the text
// now lets define the default size of our window and its layout:
setPreferredSize(new Dimension(400, 400)); // let's open the window with a default size of 400x400 pixels
// the contentPane is the container that holds all our components
getContentPane().setLayout(new GridLayout()); // the default GridLayout is like a grid with 1 column and 1 row,
// we only add one element to the window itself
getContentPane().add(splitPane); // due to the GridLayout, our splitPane will now fill the whole window
// let's configure our splitPane:
splitPane.setOrientation(JSplitPane.VERTICAL_SPLIT); // we want it to split the window verticaly
splitPane.setDividerLocation(200); // the initial position of the divider is 200 (our window is 400 pixels high)
splitPane.setTopComponent(topPanel); // at the top we want our "topPanel"
splitPane.setBottomComponent(bottomPanel); // and at the bottom we want our "bottomPanel"
// our topPanel doesn't need anymore for this example. Whatever you want it to contain, you can add it here
bottomPanel.setLayout(new BoxLayout(bottomPanel, BoxLayout.Y_AXIS)); // BoxLayout.Y_AXIS will arrange the content vertically
bottomPanel.add(scrollPane); // first we add the scrollPane to the bottomPanel, so it is at the top
scrollPane.setViewportView(textArea); // the scrollPane should make the textArea scrollable, so we define the viewport
bottomPanel.add(inputPanel); // then we add the inputPanel to the bottomPanel, so it under the scrollPane / textArea
// let's set the maximum size of the inputPanel, so it doesn't get too big when the user resizes the window
inputPanel.setMaximumSize(new Dimension(Integer.MAX_VALUE, 75)); // we set the max height to 75 and the max width to (almost) unlimited
inputPanel.setLayout(new BoxLayout(inputPanel, BoxLayout.X_AXIS)); // X_Axis will arrange the content horizontally
inputPanel.add(textField); // left will be the textField
inputPanel.add(button); // and right the "send" button
pack(); // calling pack() at the end, will ensure that every layout and size we just defined gets applied before the stuff becomes visible
}
public static void main(String args[]){
EventQueue.invokeLater(new Runnable(){
@Override
public void run(){
new MyFrame().setVisible(true);
}
});
}
}
Please be aware that this is only an example and there are multiple approaches to layout a window. It all depends on your needs and if you want the content to be resizable / responsive. Another really good approach would be the GridBagLayout which can handle quite complex layouting, but which is also quite complex to learn.
For the OP's command:
select compid,2, convert(datetime, '01/01/' + CONVERT(char(4),cal_yr) ,101) ,0, Update_dt, th1, th2, th3_pc , Update_id, Update_dt,1
from #tmp_CTF**
I get this error:
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near '*'.
when debugging something like this split the long line up so you'll get a better row number:
select compid
,2
, convert(datetime
, '01/01/'
+ CONVERT(char(4)
,cal_yr)
,101)
,0
, Update_dt
, th1
, th2
, th3_pc
, Update_id
, Update_dt
,1
from #tmp_CTF**
this now results in:
Msg 102, Level 15, State 1, Line 16
Incorrect syntax near '*'.
which is probably just from the OP not putting the entire command in the question, or use [ ] braces to signify the table name:
from [#tmp_CTF**]
if that is the table name.
All the above answers are generating an issue which is that col[0].column is returning number while worksheet.column_dimensions[column] accepts only character such as 'A', 'B', 'C' in place of column. I've modified @Virako's code and it is working fine now.
import re
import openpyxl
..
for col in _ws.columns:
max_lenght = 0
print(col[0])
col_name = re.findall('\w\d', str(col[0]))
col_name = col_name[0]
col_name = re.findall('\w', str(col_name))[0]
print(col_name)
for cell in col:
try:
if len(str(cell.value)) > max_lenght:
max_lenght = len(cell.value)
except:
pass
adjusted_width = (max_lenght+2)
_ws.column_dimensions[col_name].width = adjusted_width
Actually it's way easier to use ToolBucket plugin for Notepad++ to multiline replace.
To activate it just go to N++ menu:
Plugins > Plugin Manager > Show Plugin Manager > Check ToolBucket > Install.
Restart N++ and press ALT + SHIFT + F to multiline edit.
The answers here helped me up to a point, but I had a problem on HTML5 Number input fields when clicking the up/down buttons in Chrome.
If you click one of the buttons, and left the mouse over the button the number would keep changing as if you were holding the mouse button because the mouseup was being thrown away.
I solved this by removing the mouseup handler as soon as it had been triggered as below:
$("input:number").focus(function () {
var $elem = $(this);
$elem.select().mouseup(function (e) {
e.preventDefault();
$elem.unbind(e.type);
});
});
Hope this helps people in the future...
On the last entry; this is another trick:
SELECT AUTO_INCREMENT FROM information_schema.tables WHERE table_schema = ... and table_name = ...
I see that for the accepted answer (recursivefn5), some folks are having issues with the explanation. so I'd try to clarify to the best of my knowledge.
The for loop runs for n/2 times because at each iteration, we are increasing i (the counter) by a factor of 2. so say n = 10, the for loop will run 10/2 = 5 times i.e when i is 0,2,4,6 and 8 respectively.
In the same regard, the recursive call is reduced by a factor of 5 for every time it is called i.e it runs for n/5 times. Again assume n = 10, the recursive call runs for 10/5 = 2 times i.e when n is 10 and 5 and then it hits the base case and terminates.
Calculating the total run time, the for loop runs n/2 times for every time we call the recursive function. since the recursive fxn runs n/5 times (in 2 above),the for loop runs for (n/2) * (n/5) = (n^2)/10 times, which translates to an overall Big O runtime of O(n^2) - ignoring the constant (1/10)...
For Android Studio 0.8.9: VCS --> Import into version contraol --> Share project on Github.
It doesn't give you option to share in a specific repository or at least I couldn't find (my limitation!).
You can add your github info here: File --> Settings --> Version COntraol --> Github.
var str = "my name is saurabh ";
var empStr='',finalString='';
var chunk=[];
function reverse(str){
var i,j=0,n=str.length;
for(i=0;i<n;++i){
if(str[i]===' '){
chunk[j]=empStr;
empStr = '';
j++;
}else{
empStr=empStr+str[i];
}
}
for(var z=chunk.length-1;z>=0;z--){
finalString = finalString +' '+ chunk[z];
console.log(finalString);
}
return true;
}
reverse(str);
Please try
sudo a2enmod rewrite
or use correct apache restart command
sudo /etc/init.d/apache2 restart
Okay, oninvalid works well but it shows error even if user entered valid data. So I have used below to tackle it, hope it will work for you as well,
oninvalid="this.setCustomValidity('Your custom message.')"
onkeyup="setCustomValidity('')"
According to MSDN, the JavaScript Date object does not provide any specific date formatting methods (as you may see with other programming languages). However, you can use a few of the Date
methods and formatting to accomplish your goal:
function dateToString (date) {
// Use an array to format the month numbers
var months = [
"January",
"February",
"March",
...
];
// Use an object to format the timezone identifiers
var timeZones = {
"360": "EST",
...
};
var month = months[date.getMonth()];
var day = date.getDate();
var year = date.getFullYear();
var hours = date.getHours();
var minutes = date.getMinutes();
var time = (hours > 11 ? (hours - 11) : (hours + 1)) + ":" + minutes + (hours > 11 ? "PM" : "AM");
var timezone = timeZones[date.getTimezoneOffset()];
// Returns formatted date as string (e.g. January 28, 2011 - 7:30PM EST)
return month + " " + day + ", " + year + " - " + time + " " + timezone;
}
var date = new Date("2011-01-28T19:30:00-05:00");
alert(dateToString(date));
You could even take it one step further and override the Date.toString()
method:
function dateToString () { // No date argument this time
// Use an array to format the month numbers
var months = [
"January",
"February",
"March",
...
];
// Use an object to format the timezone identifiers
var timeZones = {
"360": "EST",
...
};
var month = months[*this*.getMonth()];
var day = *this*.getDate();
var year = *this*.getFullYear();
var hours = *this*.getHours();
var minutes = *this*.getMinutes();
var time = (hours > 11 ? (hours - 11) : (hours + 1)) + ":" + minutes + (hours > 11 ? "PM" : "AM");
var timezone = timeZones[*this*.getTimezoneOffset()];
// Returns formatted date as string (e.g. January 28, 2011 - 7:30PM EST)
return month + " " + day + ", " + year + " - " + time + " " + timezone;
}
var date = new Date("2011-01-28T19:30:00-05:00");
Date.prototype.toString = dateToString;
alert(date.toString());
Let's start by the following example:
Now we have 3 options to merge changes of feature branch into master branch:
Merge commits
Will keep all commits history of the feature branch and move them into the master branch
Will add extra dummy commit.
Rebase and merge
Will append all commits history of the feature branch in the front of the master branch
Will NOT add extra dummy commit.
Squash and merge
Will group all feature branch commits into one commit then append it in the front of the master branch
Will add extra dummy commit.
You can find below how the master branch will look after each one of them.
In all cases:
We can safely DELETE the feature branch.
I believe this can solve app.use(express.json());
For your specific case, just use the reduce
method of Arrays:
var sumArray = function() {
// Use one adding function rather than create a new one each
// time sumArray is called
function add(a, b) {
return a + b;
}
return function(arr) {
return arr.reduce(add);
};
}();
alert( sumArray([2, 3, 4]) );
As of C# 7 you could also use this:
if (clientsParsed["objects"] is JArray clients)
{
foreach (JObject item in clients.Children())
{
if (item["thisParameter"] as JToken itemToken)
{
command.Parameters["@MyParameter"].Value = JTokenToSql(itemToken);
}
}
}
The is Operator checks the Type and if its corrects the Value is inside the clients variable.
Have a look:
Syntax (Via Composer):
composer create-project laravel/laravel {directory} 4.2 --prefer-dist
Example:
composer create-project laravel/laravel my_laravel_dir 4.2
Where 4.2 is your version of laravel.
Note: It will take the latest version of Laravel automatically If you will not provide any version.
Check if you have something configured inside the config file /application/config/config.php
e.g.
$config['base_url'] = 'http://example.com/';
I noticed some issues with this that might be useful for someone just starting, or a somewhat inexperienced user, to know. First...
CD /D "C:\Documents and Settings\%username%\Start Menu\Programs\"
two things one is that a /D after the CD may prove to be useful in making sure the directory is changed but it's not really necessary, second, if you are going to pass this from user to user you have to add, instead of your name, the code %username%, this makes the code usable on any computer, as long as they have your setup.exe file in the same location as you do on your computer. of course making sure of that is more difficult. also...
start \\filer\repo\lab\"software"\"myapp"\setup.exe
the start code here, can be set up like that, but the correct syntax is
start "\\filter\repo\lab\software\myapp\" setup.exe
This will run: setup.exe, located in: \filter\repo\lab...etc.\
What you're basically doing here is relying on Date#toString()
which already has a fixed pattern. To convert a Java Date
object into another human readable String pattern, you need SimpleDateFormat#format()
.
private String modifyDateLayout(String inputDate) throws ParseException{
Date date = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss z").parse(inputDate);
return new SimpleDateFormat("dd.MM.yyyy HH:mm:ss").format(date);
}
By the way, the "unparseable date" exception can here only be thrown by SimpleDateFormat#parse()
. This means that the inputDate
isn't in the expected pattern "yyyy-MM-dd HH:mm:ss z"
. You'll probably need to modify the pattern to match the inputDate
's actual pattern.
Update: Okay, I did a test:
public static void main(String[] args) throws Exception {
String inputDate = "2010-01-04 01:32:27 UTC";
String newDate = new Test().modifyDateLayout(inputDate);
System.out.println(newDate);
}
This correctly prints:
03.01.2010 21:32:27
(I'm on GMT-4)
Update 2: as per your edit, you really got a ParseException
on that. The most suspicious part would then be the timezone of UTC
. Is this actually known at your Java environment? What Java version and what OS version are you using? Check TimeZone.getAvailableIDs()
. There must be a UTC
in between.
Just sharing my observations on this:
If you are using xCode > 6 with "inferred" sizes for the screens (see "simulated metrics" on the file inspector) in storyboard, calling
- (void)showAnnotations:(NSArray *)annotations
animated:(BOOL)animated
in viewDidLoad
will result in a too large zoom level on iPhones with 4 inches because the layout for the map is still on the size of the wider screens from the storyboard.
You can move your call to showAnnotations...
to viewDidAppear
. Then the size of the map has already been adjusted to the smaller screen of an iPhone 4.
Or alternatively change the value "inferred" in the file inspector under "simulated metrics" to iphone 4-inch.
Only SortedSet
can do the ordering of the Set
I found the ioctl solution problematic on os x (which is POSIX compliant so should be similiar to linux). However getifaddress() will let you do the same thing easily, it works fine for me on os x 10.5 and should be the same below.
I've done a quick example below which will print all of the machine's IPv4 address, (you should also check the getifaddrs was successful ie returns 0).
I've updated it show IPv6 addresses too.
#include <stdio.h>
#include <sys/types.h>
#include <ifaddrs.h>
#include <netinet/in.h>
#include <string.h>
#include <arpa/inet.h>
int main (int argc, const char * argv[]) {
struct ifaddrs * ifAddrStruct=NULL;
struct ifaddrs * ifa=NULL;
void * tmpAddrPtr=NULL;
getifaddrs(&ifAddrStruct);
for (ifa = ifAddrStruct; ifa != NULL; ifa = ifa->ifa_next) {
if (!ifa->ifa_addr) {
continue;
}
if (ifa->ifa_addr->sa_family == AF_INET) { // check it is IP4
// is a valid IP4 Address
tmpAddrPtr=&((struct sockaddr_in *)ifa->ifa_addr)->sin_addr;
char addressBuffer[INET_ADDRSTRLEN];
inet_ntop(AF_INET, tmpAddrPtr, addressBuffer, INET_ADDRSTRLEN);
printf("%s IP Address %s\n", ifa->ifa_name, addressBuffer);
} else if (ifa->ifa_addr->sa_family == AF_INET6) { // check it is IP6
// is a valid IP6 Address
tmpAddrPtr=&((struct sockaddr_in6 *)ifa->ifa_addr)->sin6_addr;
char addressBuffer[INET6_ADDRSTRLEN];
inet_ntop(AF_INET6, tmpAddrPtr, addressBuffer, INET6_ADDRSTRLEN);
printf("%s IP Address %s\n", ifa->ifa_name, addressBuffer);
}
}
if (ifAddrStruct!=NULL) freeifaddrs(ifAddrStruct);
return 0;
}
You can use the ScriptManager.RegisterStartupScript();
to call any of your javascript event/Client Event from the server. For example, to display a message using javascript's alert();
, you can do this:
protected void ddl_SelectedIndexChanged(object sender, EventArgs e)
{
Response.write("<script>alert('This is my message');</script>");
//----or alternatively and to be more proper
ScriptManager.RegisterStartupScript(this, this.GetType(), "callJSFunction", "alert('This is my message')", true);
}
To be exact for you, do this...
protected void ddl_SelectedIndexChanged(object sender, EventArgs e)
{
ScriptManager.RegisterStartupScript(this, this.GetType(), "callJSFunction", "CalcTotalAmt();", true);
}
Came across this while looking for help. I was trying to implement the favicon in my Django project and it was not showing -- wanted to add to the conversation.
While trying to implement the favicon in my Django project I renamed the 'favicon.ico' file to 'my_filename.ico' –– the image would not show. After renaming to 'favicon.ico' resolved the issue and graphic displayed. below is the code that resolved my issue:
<link rel="shortcut icon" type="image/png" href="{% static 'img/favicon.ico' %}" />
If git check-attr --all -- src/my_file.txt
indicates that your file is flagged as binary, and you haven't set it as binary in .gitattributes
, check for it in /.git/info/attributes
.
There is an easier way if you are using XAMPP.
Open the XAMPP control panel, and click on the config button in mysql section.
Now click on the my.ini and it will open in the editor. Update the max_allowed_packet to your required size.
Then restart the mysql service. Click on stop on the Mysql service click start again. Wait for a few minutes.
Then try to run your Mysql query again. Hope it will work.
import os
for filename in os.listdir("C:\\temp"):
print filename
I recently wrote a directive that supports native multiple file uploads. The solution I've created relies on a service to fill the gap you've identified with the $http service. I've also included a directive, which provides an easy API for your angular module to use to post the files and data.
Example usage:
<lvl-file-upload
auto-upload='false'
choose-file-button-text='Choose files'
upload-file-button-text='Upload files'
upload-url='http://localhost:3000/files'
max-files='10'
max-file-size-mb='5'
get-additional-data='getData(files)'
on-done='done(files, data)'
on-progress='progress(percentDone)'
on-error='error(files, type, msg)'/>
You can find the code on github, and the documentation on my blog
It would be up to you to process the files in your web framework, but the solution I've created provides the angular interface to getting the data to your server. The angular code you need to write is to respond to the upload events
angular
.module('app', ['lvl.directives.fileupload'])
.controller('ctl', ['$scope', function($scope) {
$scope.done = function(files,data} { /*do something when the upload completes*/ };
$scope.progress = function(percentDone) { /*do something when progress is reported*/ };
$scope.error = function(file, type, msg) { /*do something if an error occurs*/ };
$scope.getAdditionalData = function() { /* return additional data to be posted to the server*/ };
});
No, a view is queried no differently to SELECTing from a table.
To do what you want, use a table-valued user-defined function with one or more parameters
in smarty V3 you can use this
{var_dump($variable)}
The top answer is outdated for Visual Studio 2015
.
English:
Configuration Properties -> C/C++ -> General -> Treat Warning As Errors
German:
Konfigurationseigenschaften -> C/C++ -> Allgemein -> Warnungen als Fehler behandeln
Or use this image as reference, way easier to quickly mentally figure out the location:
HTML:
<div class="form-group">
<label for="pt_date" class="col-2 col-form-label">Date</label>
<input class="form-control" type="date" value=<?php echo date("Y-m-d") ;?> id="pt_date" name="pt_date">
</div>
SQL
$pt_date = $_POST['pt_date'];
$sql = "INSERT INTO `table` ( `pt_date`) VALUES ( '$pt_date')";
The problem is the JSON string format, You can use a simple URL string in data:
$http({
method: 'POST',
url: url,
headers: {'Content-Type': 'application/x-www-form-urlencoded'},
data: 'username='+$scope.userName+'&password='+$scope.password
}).success(function () {});
You can also use the void operator to obtain an undefined value:
if (input !== void 0) {
// do stuff
}
(And yes, as noted in another answer, this will throw an error if the variable was not declared, but this case can often be ruled out either by code inspection, or by code refactoring, e.g. using window.input !== void 0
for testing global variables or adding var input
.)
======authorization====== MIDDLEWARE_x000D_
_x000D_
const jwt = require('../helpers/jwt')_x000D_
const User = require('../models/user')_x000D_
_x000D_
module.exports = {_x000D_
authentication: function(req, res, next) {_x000D_
try {_x000D_
const user = jwt.verifyToken(req.headers.token, process.env.JWT_KEY)_x000D_
User.findOne({ email: user.email }).then(result => {_x000D_
if (result) {_x000D_
req.body.user = result_x000D_
req.params.user = result_x000D_
next()_x000D_
} else {_x000D_
throw new Error('User not found')_x000D_
}_x000D_
})_x000D_
} catch (error) {_x000D_
console.log('langsung dia masuk sini')_x000D_
_x000D_
next(error)_x000D_
}_x000D_
},_x000D_
_x000D_
adminOnly: function(req, res, next) {_x000D_
let loginUser = req.body.user_x000D_
if (loginUser && loginUser.role === 'admin') {_x000D_
next()_x000D_
} else {_x000D_
next(new Error('Not Authorized'))_x000D_
}_x000D_
}_x000D_
}_x000D_
_x000D_
====error handler==== MIDDLEWARE_x000D_
const errorHelper = require('../helpers/errorHandling')_x000D_
_x000D_
module.exports = function(err, req, res, next) {_x000D_
// console.log(err)_x000D_
let errorToSend = errorHelper(err)_x000D_
// console.log(errorToSend)_x000D_
res.status(errorToSend.statusCode).json(errorToSend)_x000D_
}_x000D_
_x000D_
_x000D_
====error handling==== HELPER_x000D_
var nodeError = ["Error","EvalError","InternalError","RangeError","ReferenceError","SyntaxError","TypeError","URIError"]_x000D_
var mongooseError = ["MongooseError","DisconnectedError","DivergentArrayError","MissingSchemaError","DocumentNotFoundError","MissingSchemaError","ObjectExpectedError","ObjectParameterError","OverwriteModelError","ParallelSaveError","StrictModeError","VersionError"]_x000D_
var mongooseErrorFromClient = ["CastError","ValidatorError","ValidationError"];_x000D_
var jwtError = ["TokenExpiredError","JsonWebTokenError","NotBeforeError"]_x000D_
_x000D_
function nodeErrorMessage(message){_x000D_
switch(message){_x000D_
case "Token is undefined":{_x000D_
return 403;_x000D_
}_x000D_
case "User not found":{_x000D_
return 403;_x000D_
}_x000D_
case "Not Authorized":{_x000D_
return 401;_x000D_
}_x000D_
case "Email is Invalid!":{_x000D_
return 400;_x000D_
}_x000D_
case "Password is Invalid!":{_x000D_
return 400;_x000D_
}_x000D_
case "Incorrect password for register as admin":{_x000D_
return 400;_x000D_
}_x000D_
case "Item id not found":{_x000D_
return 400;_x000D_
}_x000D_
case "Email or Password is invalid": {_x000D_
return 400_x000D_
}_x000D_
default :{_x000D_
return 500;_x000D_
}_x000D_
}_x000D_
}_x000D_
_x000D_
module.exports = function(errorObject){_x000D_
// console.log("===ERROR OBJECT===")_x000D_
// console.log(errorObject)_x000D_
// console.log("===ERROR STACK===")_x000D_
// console.log(errorObject.stack);_x000D_
_x000D_
let statusCode = 500; _x000D_
let returnObj = {_x000D_
error : errorObject_x000D_
}_x000D_
if(jwtError.includes(errorObject.name)){_x000D_
statusCode = 403;_x000D_
returnObj.message = "Token is Invalid"_x000D_
returnObj.source = "jwt"_x000D_
}_x000D_
else if(nodeError.includes(errorObject.name)){_x000D_
returnObj.error = JSON.parse(JSON.stringify(errorObject, ["message", "arguments", "type", "name"]))_x000D_
returnObj.source = "node";_x000D_
statusCode = nodeErrorMessage(errorObject.message);_x000D_
returnObj.message = errorObject.message;_x000D_
}else if(mongooseError.includes(errorObject.name)){_x000D_
returnObj.source = "database"_x000D_
returnObj.message = "Error from server"_x000D_
}else if(mongooseErrorFromClient.includes(errorObject.name)){_x000D_
returnObj.source = "database";_x000D_
errorObject.message ? returnObj.message = errorObject.message : returnObj.message = "Bad Request"_x000D_
statusCode = 400;_x000D_
}else{_x000D_
returnObj.source = "unknown error";_x000D_
returnObj.message = "Something error";_x000D_
}_x000D_
returnObj.statusCode = statusCode;_x000D_
_x000D_
return returnObj;_x000D_
_x000D_
_x000D_
}_x000D_
_x000D_
_x000D_
===jwt====_x000D_
const jwt = require('jsonwebtoken')_x000D_
_x000D_
function generateToken(payload) {_x000D_
let token = jwt.sign(payload, process.env.JWT_KEY)_x000D_
return token_x000D_
}_x000D_
_x000D_
function verifyToken(token) {_x000D_
let payload = jwt.verify(token, process.env.JWT_KEY)_x000D_
return payload_x000D_
}_x000D_
_x000D_
module.exports = {_x000D_
generateToken, verifyToken_x000D_
}_x000D_
_x000D_
===router index===_x000D_
const express = require('express')_x000D_
const router = express.Router()_x000D_
_x000D_
// router.get('/', )_x000D_
router.use('/users', require('./users'))_x000D_
router.use('/products', require('./product'))_x000D_
router.use('/transactions', require('./transaction'))_x000D_
_x000D_
module.exports = router_x000D_
_x000D_
====router user ====_x000D_
const express = require('express')_x000D_
const router = express.Router()_x000D_
const User = require('../controllers/userController')_x000D_
const auth = require('../middlewares/auth')_x000D_
_x000D_
/* GET users listing. */_x000D_
router.post('/register', User.register)_x000D_
router.post('/login', User.login)_x000D_
router.get('/', auth.authentication, User.getUser)_x000D_
router.post('/logout', auth.authentication, User.logout)_x000D_
module.exports = router_x000D_
_x000D_
_x000D_
====app====_x000D_
require('dotenv').config()_x000D_
const express = require('express')_x000D_
const cookieParser = require('cookie-parser')_x000D_
const logger = require('morgan')_x000D_
const cors = require('cors')_x000D_
const indexRouter = require('./routes/index')_x000D_
const errorHandler = require('./middlewares/errorHandler')_x000D_
const mongoose = require('mongoose')_x000D_
const app = express()_x000D_
_x000D_
mongoose.connect(process.env.DB_URI, {_x000D_
useNewUrlParser: true,_x000D_
useUnifiedTopology: true,_x000D_
useCreateIndex: true,_x000D_
useFindAndModify: false_x000D_
})_x000D_
_x000D_
app.use(cors())_x000D_
app.use(logger('dev'))_x000D_
app.use(express.json())_x000D_
app.use(express.urlencoded({ extended: false }))_x000D_
app.use(cookieParser())_x000D_
_x000D_
app.use('/', indexRouter)_x000D_
app.use(errorHandler)_x000D_
_x000D_
module.exports = app
_x000D_
If you need the port number also, you can use
Request.Url.Authority
Example:
string url = Request.Url.Authority + HttpContext.Current.Request.RawUrl.ToString();
if (Request.ServerVariables["HTTPS"] == "on")
{
url = "https://" + url;
}
else
{
url = "http://" + url;
}
use jQuery.live() instead . Documentation here
e.g
$("mylink").live("click", function(event) { alert("new link clicked!");});
Be sure that android:debuggable="true"
is set in the application
tag of your manifest file, and then:
Anders solution worked for me but I wasn't sure how to invert it to get the opposite (when you weren't an admin).
Here's my solution. It has two cases an IF and ELSE case, and some ascii art to ensure people actually read it. :)
Rushyo posted this solution here: How to detect if CMD is running as Administrator/has elevated privileges?
NET SESSION >nul 2>&1
IF %ERRORLEVEL% EQU 0 (
ECHO Administrator PRIVILEGES Detected!
) ELSE (
ECHO NOT AN ADMIN!
)
@rem ----[ This code block detects if the script is being running with admin PRIVILEGES If it isn't it pauses and then quits]-------
echo OFF
NET SESSION >nul 2>&1
IF %ERRORLEVEL% EQU 0 (
ECHO Administrator PRIVILEGES Detected!
) ELSE (
echo ######## ######## ######## ####### ########
echo ## ## ## ## ## ## ## ## ##
echo ## ## ## ## ## ## ## ## ##
echo ###### ######## ######## ## ## ########
echo ## ## ## ## ## ## ## ## ##
echo ## ## ## ## ## ## ## ## ##
echo ######## ## ## ## ## ####### ## ##
echo.
echo.
echo ####### ERROR: ADMINISTRATOR PRIVILEGES REQUIRED #########
echo This script must be run as administrator to work properly!
echo If you're seeing this after clicking on a start menu icon, then right click on the shortcut and select "Run As Administrator".
echo ##########################################################
echo.
PAUSE
EXIT /B 1
)
@echo ON
Works on WinXP --> Win8 (including 32/64 bit versions).
EDIT: 8/28/2012 Updated to support Windows 8. @BenHooper pointed this out in his answer below. Please upvote his answer.
As a side note, consider passing strings in setWord() as const references to avoid excess copying. Also, in displayWord, consider making this a const function to follow const-correctness.
void setWord(const std::string& word) {
theWord = word;
}
I just created a project which explain what is the difference between all subjects:
https://github.com/piecioshka/rxjs-subject-vs-behavior-vs-replay-vs-async
(?i)^[ \r\n]*CTR (?i) -- case insensitive -- Remove if case sensitive. [ \r\n] -- ignore space and new lines * -- 0 or more times the same CTR - your starts with string.
You're trying to access a JSON, not JSONP.
Notice the difference between your source:
And actual JSONP (a wrapping function):
Search for JSON + CORS/Cross-domain policy and you will find hundreds of SO threads on this very topic.
Core Wars is the classic, of course. But Rocky's Boots is another one. Imagine! There was a time (1982) when you could sell a commercial game based on logic gates!
An update:
As of Laravel 5.3 doing this in a single step is possible; the firstOrCreate
method now accepts an optional second array as an argument.
The first array argument is the array on which the fields/values are matched, and the second array is the additional fields to use in the creation of the model if no match is found via matching the fields/values in the first array:
Here is from pandas docs on advanced indexing:
The section will explain exactly what you need! Turns out df.loc
(as .ix has been deprecated -- as many have pointed out below) can be used for cool slicing/dicing of a dataframe. And. It can also be used to set things.
df.loc[selection criteria, columns I want] = value
So Bren's answer is saying 'find me all the places where df.A == 0
, select column B
and set it to np.nan
'
The answer to this is yes - in HTML 5 you can resize images client-side using the canvas element. You can also take the new data and send it to a server. See this tutorial:
http://hacks.mozilla.org/2011/01/how-to-develop-a-html5-image-uploader/
If you really want to use a set:
String[] strArray = {"foo", "foo", "bar"};
Set<String> mySet = new HashSet<String>(Arrays.asList(strArray));
System.out.println(mySet);
output:
[foo, bar]
Maybe this will answer your question:
<ImageView
android:id="@+id/cover_image"
android:layout_width="fill_parent"
android:layout_height="wrap_content"
android:scaleType="fitCenter"
android:adjustViewBounds="true" />
You can ignore the scaleType
attribute for this particular situation.
There are two ways to write case statements, you seem to be using a combination of the two
case a.updatedDate
when 1760 then 'Entered on' + a.updatedDate
when 1710 then 'Viewed on' + a.updatedDate
else 'Last Updated on' + a.updateDate
end
or
case
when a.updatedDate = 1760 then 'Entered on' + a.updatedDate
when a.updatedDate = 1710 then 'Viewed on' + a.updatedDate
else 'Last Updated on' + a.updateDate
end
are equivalent. They may not work because you may need to convert date types to varchars to append them to other varchars.
I think this simple "decision tree" by Julie Lerman the author of "Programming Entity Framework" should help making the decision with more confidence:
More info Here.
I had a similar problem. I am posting my solution here because I believe it might help one of the commenters.
For me, the obstacle was that the page required a login and then gave me a new URL through javascript. Here is what I had to do:
curl -c cookiejar -g -O -J -L -F "j_username=username" -F "j_password=password" <URL>
Note that j_username
and j_password
is the name of the fields for my website's login form. You will have to open the source of the webpage to see what the 'name' of the username field and the 'name' of the password field is in your case.
After that I go an html file with java script in which the new URL was embedded. After parsing this out just resubmit with the new URL:
curl -c cookiejar -g -O -J -L -F "j_username=username" -F "j_password=password" <NEWURL>
To complement the AmitD answer:
Just copy/pasted your program and had this output:
Error!
Enter first num:
.... infinite times ....
As you can see, the instruction:
n1 = input.nextInt();
Is continuously throwing the Exception when your double number is entered, and that's because your stream is not cleared. To fix it, follow the AmitD answer.
It's a bit of hacky way, but for me this code works (iOS 6):
AppDelegate *appDelegate = (AppDelegate *)[[UIApplication sharedApplication] delegate];
[self presentViewController:self.signInViewController animated:YES completion:^{
[self.signInViewController dismissViewControllerAnimated:NO completion:^{
appDelegate.window.rootViewController.modalPresentationStyle = UIModalPresentationCurrentContext;
[self presentViewController:self.signInViewController animated:NO completion:nil];
appDelegate.window.rootViewController.modalPresentationStyle = UIModalPresentationFullScreen;
}];
}];
This code works also on iPhone
To anyone still struggling to get the os.environ
solution to work as I was, check that this is placed before you import tensorflow
in your script, just like mwweb's answer:
import os
os.environ['TF_CPP_MIN_LOG_LEVEL'] = '3' # or any {'0', '1', '2'}
import tensorflow as tf
I had a similar issue and it turned out that i had to add an extra entry in cmake
to include the files.
Since i was also using the zmq library I had to add this to the included libraries as well.
You can use insert
to specify where you want to new column to be. In this case, I use 0
to place the new column at the left.
df.insert(0, 'Name', 'abc')
Name Date Open High Low Close
0 abc 01-01-2015 565 600 400 450
I solved this by writing the explicit IP address defined in the Listener.ora file as the hostname.
So, instead of "localhost", I wrote "192.168.1.2" as the "Hostname" in the SQL Developer field.
In the below picture I highlighted the input boxes that I've modified:
You can just reverse your log and just head it for the first result.
git log --pretty=oneline --reverse | head -1
When you want to create an external_table, all field's name must be written in UPPERCASE.
Done.
>>> from datetime import date
>>> date.today().month
2
>>> date.today().year
2020
>>> date.today().day
13
update: nowadays we have mobile and custom keyboards and we cannot continue trusting these arbitrary key codes such as 13 and 186. in other words, stop using event.which
/event.keyCode
and start using event.key
:
if (event.key === "Enter" || event.key === "ArrowUp" || event.key === "ArrowDown")
This error can also occur if you are not following the marco rules
Like
#define 1K 1024 // Macro rules must be identifiers error occurs
Reason: Macro Should begin with a letter, not a number
Change to
#define ONE_KILOBYTE 1024 // This resolves
My example
private options = new RequestOptions({headers: new Headers({'Content-Type': 'application/json'})});
My method
getUserByName(name: string): Observable<MyObject[]> {
//set request params
let params: URLSearchParams = new URLSearchParams();
params.set("name", name);
//params.set("surname", surname); for more params
this.options.search = params;
let url = "http://localhost:8080/test/user/";
console.log("url: ", url);
return this.http.get(url, this.options)
.map((resp: Response) => resp.json() as MyObject[])
.catch(this.handleError);
}
private handleError(err) {
console.log(err);
return Observable.throw(err || 'Server error');
}
in my component
userList: User[] = [];
this.userService.getUserByName(this.userName).subscribe(users => {
this.userList = users;
});
By postman
http://localhost:8080/test/user/?name=Ethem
Using max(date) didn't solve my problem as there is no assurance that other columns will be from the same row as the max(date) is. Instead of that this one solved my problem and sorted group by in a correct order and values of other columns are from the same row as the max date is:
SELECT model, date
FROM (SELECT * FROM doc ORDER BY date DESC) as sortedTable
GROUP BY model
You can try styling with LevelSubMenuStyles
<asp:Menu ID="mainMenu" runat="server" Orientation="Horizontal"
StaticEnableDefaultPopOutImage="False">
<StaticMenuStyle CssClass="test" />
<LevelSubMenuStyles>
<asp:SubMenuStyle BackColor="#33CCFF" BorderColor="#FF9999"
Font-Underline="False" />
<asp:SubMenuStyle BackColor="#FF99FF" Font-Underline="False" />
</LevelSubMenuStyles>
<StaticMenuItemStyle CssClass="main-nav-item" />
</asp:Menu>
use [\\W+]
or "[^a-zA-Z0-9]"
as regex to match any special characters and also use String.replaceAll(regex, String) to replace the spl charecter with an empty string. remember as the first arg of String.replaceAll is a regex you have to escape it with a backslash to treat em as a literal charcter.
String c= "hjdg$h&jk8^i0ssh6";
Pattern pt = Pattern.compile("[^a-zA-Z0-9]");
Matcher match= pt.matcher(c);
while(match.find())
{
String s= match.group();
c=c.replaceAll("\\"+s, "");
}
System.out.println(c);
You are looking to use dirname. If you only want that one directory, you can use os.path.basename,
When put all together it looks like this:
os.path.basename(os.path.dirname('dir/sub_dir/other_sub_dir/file_name.txt'))
That should get you "other_sub_dir"
The following is not the ideal approach, but I originally proposed,using os.path.split, and simply get the last item. which would look like this:
os.path.split(os.path.dirname('dir/sub_dir/other_sub_dir/file_name.txt'))[-1]
Look if you have another service or program running on the http port. It happened to me when I tried to use the port and it was taken by another program.
In python 3 you can do this to print on the same line:
print('', end='\r')
Especially useful to keep track of the latest update and progress.
I would also recommend tqdm from here if one wants to see the progress of a loop. It prints the current iteration and total iterations as a progression bar with an expected time of finishing. Super useful and quick. Works for python2 and python3.
If you are getting this error while developing an instant app then go to Device Settings -> Apps and clear the instant app from device.
@jmetz's answer is probably the one most people need; however it yields a one-dimensional array, e.g. making it unusable to remove entire rows or columns in matrices.
To do so, one should reduce the logical array to one dimension, then index the target array. For instance, the following will remove rows which have at least one NaN value:
x = x[~numpy.isnan(x).any(axis=1)]
See more detail here.
Your example code is wrong. This works:
import datetime
datetime.datetime.strptime("21/12/2008", "%d/%m/%Y").strftime("%Y-%m-%d")
The call to strptime() parses the first argument according to the format specified in the second, so those two need to match. Then you can call strftime() to format the result into the desired final format.
It should be quite simple if you are using LogBack or SLF4J. I do it as below
//imports
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
//Initialize logger
Logger logger = LoggerFactory.getLogger(<classname>.class);
try {
//try something
} catch(Exception e){
//Actual logging of error
logger.error("some message", e);
}
When you have a 6 digit color code e.g. #ffffff, replace it with #ffffff00. Just add 2 zeros at the end to make the color transparent.
Here is an article describing the new standard in more depth: https://css-tricks.com/8-digit-hex-codes/
try this
(isset ($_SERVER['HTTP_CLIENT_IP']) ?
$_SERVER['HTTP_CLIENT_IP'] :
(isset ($_SERVER['HTTP_X_FORWARDED_FOR']) ?
$_SERVER['HTTP_X_FORWARDED_FOR'] :
$_SERVER['REMOTE_ADDR']
)
)
Here's the one that may be little easier to read. Hope this is helpful.
from PIL import Image
from PIL import ExifTags
exifData = {}
img = Image.open(picture.jpg)
exifDataRaw = img._getexif()
for tag, value in exifDataRaw.items():
decodedTag = ExifTags.TAGS.get(tag, tag)
exifData[decodedTag] = value
There isn't one built in, but it's simple to roll your own, as demonstrated here:
import operator
def prod(factors):
return reduce(operator.mul, factors, 1)
See answers to this question:
Which Python module is suitable for data manipulation in a list?
you'll want to use && to see that it is not equal to "AM" AND not equal to "PM"
if(!TimeOfDayStringQ.equals("AM") && !TimeOfDayStringQ.equals("PM")) {
System.out.println("Sorry, incorrect input.");
System.exit(1);
}
to be clear you can also do
if(!(TimeOfDayStringQ.equals("AM") || TimeOfDayStringQ.equals("PM"))){
System.out.println("Sorry, incorrect input.");
System.exit(1);
}
to have the not (one or the other)
phrase in the code (remember the (silent) brackets)
I've made a jQuery plugin for the equivalent of
<pre>
<?php echo print_r($data) ?>
</pre>
You can download it at https://github.com/tomasvanrijsse/jQuery.dump
Try using the count function in dplyr:
library(dplyr)
dat1_frame %>%
count(MONTH.YEAR)
I am not sure how you got MONTH-YEAR as a variable name. My R version does not allow for such a variable name, so I replaced it with MONTH.YEAR.
As a side note, the mistake in your code was that dat1_frame %.% group_by(MONTH-YEAR)
without a summarise
function returns the original data frame without any modifications. So, you want to use
dat1_frame %>%
group_by(MONTH.YEAR) %>%
summarise(count=n())
As an extension to @JBNizet's answer for more technical users here's what implementation of org.w3c.dom.Node
interface in com.sun.org.apache.xerces.internal.dom.ParentNode
looks like, gives you the idea how it actually works.
public void normalize() {
// No need to normalize if already normalized.
if (isNormalized()) {
return;
}
if (needsSyncChildren()) {
synchronizeChildren();
}
ChildNode kid;
for (kid = firstChild; kid != null; kid = kid.nextSibling) {
kid.normalize();
}
isNormalized(true);
}
It traverses all the nodes recursively and calls kid.normalize()
This mechanism is overridden in org.apache.xerces.dom.ElementImpl
public void normalize() {
// No need to normalize if already normalized.
if (isNormalized()) {
return;
}
if (needsSyncChildren()) {
synchronizeChildren();
}
ChildNode kid, next;
for (kid = firstChild; kid != null; kid = next) {
next = kid.nextSibling;
// If kid is a text node, we need to check for one of two
// conditions:
// 1) There is an adjacent text node
// 2) There is no adjacent text node, but kid is
// an empty text node.
if ( kid.getNodeType() == Node.TEXT_NODE )
{
// If an adjacent text node, merge it with kid
if ( next!=null && next.getNodeType() == Node.TEXT_NODE )
{
((Text)kid).appendData(next.getNodeValue());
removeChild( next );
next = kid; // Don't advance; there might be another.
}
else
{
// If kid is empty, remove it
if ( kid.getNodeValue() == null || kid.getNodeValue().length() == 0 ) {
removeChild( kid );
}
}
}
// Otherwise it might be an Element, which is handled recursively
else if (kid.getNodeType() == Node.ELEMENT_NODE) {
kid.normalize();
}
}
// We must also normalize all of the attributes
if ( attributes!=null )
{
for( int i=0; i<attributes.getLength(); ++i )
{
Node attr = attributes.item(i);
attr.normalize();
}
}
// changed() will have occurred when the removeChild() was done,
// so does not have to be reissued.
isNormalized(true);
}
Hope this saves you some time.
var matches = new Array();
var allDom = document.getElementsByTagName("*");
for(var i =0; i < allDom.length; i++){
var d = allDom[i];
if(d["data-foo"] !== undefined) {
matches.push(d);
}
}
Not sure who dinged me with a -1, but here's the proof.
Groupby A:
In [0]: grp = df.groupby('A')
Within each group, sum over B and broadcast the values using transform. Then sort by B:
In [1]: grp[['B']].transform(sum).sort('B')
Out[1]:
B
2 -2.829710
5 -2.829710
1 0.253651
4 0.253651
0 0.551377
3 0.551377
Index the original df by passing the index from above. This will re-order the A values by the aggregate sum of the B values:
In [2]: sort1 = df.ix[grp[['B']].transform(sum).sort('B').index]
In [3]: sort1
Out[3]:
A B C
2 baz -0.528172 False
5 baz -2.301539 True
1 bar -0.611756 True
4 bar 0.865408 False
0 foo 1.624345 False
3 foo -1.072969 True
Finally, sort the 'C' values within groups of 'A' using the sort=False
option to preserve the A sort order from step 1:
In [4]: f = lambda x: x.sort('C', ascending=False)
In [5]: sort2 = sort1.groupby('A', sort=False).apply(f)
In [6]: sort2
Out[6]:
A B C
A
baz 5 baz -2.301539 True
2 baz -0.528172 False
bar 1 bar -0.611756 True
4 bar 0.865408 False
foo 3 foo -1.072969 True
0 foo 1.624345 False
Clean up the df index by using reset_index
with drop=True
:
In [7]: sort2.reset_index(0, drop=True)
Out[7]:
A B C
5 baz -2.301539 True
2 baz -0.528172 False
1 bar -0.611756 True
4 bar 0.865408 False
3 foo -1.072969 True
0 foo 1.624345 False
You pass the exception directly to the logger, e.g.
try {
...
} catch (Exception e) {
log.error( "failed!", e );
}
It's up to log4j to render the stack trace.
It's more convention than anything else.
T
is meant to be a Type E
is meant to be an Element (List<E>
: a list of Elements) K
is Key (in a Map<K,V>
) V
is Value (as a return value or mapped value) They are fully interchangeable (conflicts in the same declaration notwithstanding).
System.Windows.Forms.Application.Exit()
- Informs all message pumps that they must terminate, and then closes all application windows after the messages have been processed. This method stops all running message loops on all threads and closes all windows of the application. This method does not force the application to exit. The Exit()
method is typically called from within a message loop, and forces Run()
to return. To exit a message loop for the current thread only, call ExitThread()
. This is the call to use if you are running a Windows Forms application. As a general guideline, use this call if you have called System.Windows.Forms.Application.Run()
.
System.Environment.Exit(exitCode)
- Terminates this process and gives the underlying operating system the specified exit code. This call requires that you have SecurityPermissionFlag.UnmanagedCode
permissions. If you do not, a SecurityException
error occurs. This is the call to use if you are running a console application.
I hope it is best to use Application.Exit
See also these links:
===
and !==
are strict comparison operators:
JavaScript has both strict and type-converting equality comparison. For
strict
equality the objects being compared must have the same type and:
- Two strings are strictly equal when they have the same sequence of characters, same length, and same characters in corresponding positions.
- Two numbers are strictly equal when they are numerically equal (have the same number value).
NaN
is not equal to anything, includingNaN
. Positive and negative zeros are equal to one another.- Two Boolean operands are strictly equal if both are true or both are false.
- Two objects are strictly equal if they refer to the same
Object
.Null
andUndefined
types are==
(but not===
). [I.e. (Null==Undefined
) istrue
but (Null===Undefined
) isfalse
]
You want to use jQuery WayPoints. It is a very simple plugin and acheives exactly what you have described.
Most straightforward implementation
$('.thing').waypoint(function(direction) {
alert('Top of thing hit top of viewport.');
});
You will need to set some custom CSS to set exactly where it does become stuck, this is normal though for most ways to do it.
This page will show you all the examples and info that you need.
For future reference a example of it stopping and starting is this website. It is a "in the wild" example.
@JigarJoshi it's the good answer, and of course also @Tim recommendation to use .joda-time.
I only want to add more possibilities to subtract days from a java.util.Date
.
One possibility is to use apache-commons-lang. You can do it using DateUtils
as follows:
Date dateBefore30Days = DateUtils.addDays(new Date(),-30);
Of course add the commons-lang
dependency to do only date subtract it's probably not a good options, however if you're already using commons-lang
it's a good choice. There is also convenient methods to addYears
,addMonths
,addWeeks
and so on, take a look at the api here.
Another possibility is to take advantage of new LocalDate
from Java 8 using minusDays(long days)
method:
LocalDate dateBefore30Days = LocalDate.now(ZoneId.of("Europe/Paris")).minusDays(30);
You could also do something as follow
public enum DAY {MON, TUES, WED, THU, FRI, SAT, SUN};
EnumSet.allOf(DAY.class).stream().map(e -> e.name()).collect(Collectors.toList())
or
EnumSet.allOf(DAY.class).stream().map(DAY::name).collect(Collectors.toList())
The main reason why I stumbled across this question is that I wanted to write a generic validator that validates whether a given string enum name is valid for a given enum type (Sharing in case anyone finds useful).
For the validation, I had to use Apache's EnumUtils
library since the type of enum is not known at compile time.
@SuppressWarnings({ "unchecked", "rawtypes" })
public static void isValidEnumsValid(Class clazz, Set<String> enumNames) {
Set<String> notAllowedNames = enumNames.stream()
.filter(enumName -> !EnumUtils.isValidEnum(clazz, enumName))
.collect(Collectors.toSet());
if (notAllowedNames.size() > 0) {
String validEnumNames = (String) EnumUtils.getEnumMap(clazz).keySet().stream()
.collect(Collectors.joining(", "));
throw new IllegalArgumentException("The requested values '" + notAllowedNames.stream()
.collect(Collectors.joining(",")) + "' are not valid. Please select one more (case-sensitive) "
+ "of the following : " + validEnumNames);
}
}
I was too lazy to write an enum annotation validator as shown in here https://stackoverflow.com/a/51109419/1225551
Those commands use different output streams. By default both messages will be printed on console but it's possible for example to redirect one or both of these to a file.
java MyApp 2>errors.txt
This will redirect System.err
to errors.txt
file.
I also came across this problem. In my case, I didn't know the type of the IEnumerable. So the answers given above wont work. However, I solved it like this:
public static DataTable CreateDataTable(IEnumerable source)
{
var table = new DataTable();
int index = 0;
var properties = new List<PropertyInfo>();
foreach (var obj in source)
{
if (index == 0)
{
foreach (var property in obj.GetType().GetProperties())
{
if (Nullable.GetUnderlyingType(property.PropertyType) != null)
{
continue;
}
properties.Add(property);
table.Columns.Add(new DataColumn(property.Name, property.PropertyType));
}
}
object[] values = new object[properties.Count];
for (int i = 0; i < properties.Count; i++)
{
values[i] = properties[i].GetValue(obj);
}
table.Rows.Add(values);
index++;
}
return table;
}
Keep in mind that using this method, requires at least one item in the IEnumerable. If that's not the case, the DataTable wont create any columns.
This function trims a string from left and right. Also it removes carriage returns from the string, an action which is not done by the LTRIM and RTRIM
IF OBJECT_ID(N'dbo.TRIM', N'FN') IS NOT NULL
DROP FUNCTION dbo.TRIM;
GO
CREATE FUNCTION dbo.TRIM (@STR NVARCHAR(MAX)) RETURNS NVARCHAR(MAX)
BEGIN
RETURN(LTRIM(RTRIM(REPLACE(REPLACE(@STR ,CHAR(10),''),CHAR(13),''))))
END;
GO
You have a couple of options:
This is an online database but you can try with the stackoverflow database: https://data.stackexchange.com/stackoverflow/query/new
You also can download its dumps here:
$userinput = "http://www.example.vn/";
//$url = urlencode($userinput);
$input = @file_get_contents($userinput) or die("Could not access file: $userinput");
$regexp = "<tagname\s[^>]*>(.*)<\/tagname>";
//==Example:
//$regexp = "<div\s[^>]*>(.*)<\/div>";
if(preg_match_all("/$regexp/siU", $input, $matches, PREG_SET_ORDER)) {
foreach($matches as $match) {
// $match[2] = link address
// $match[3] = link text
}
}
$("input").keypress(function(event) {
if (event.which == 13) {
event.preventDefault();
$("form").submit();
}
});
Why not using the built in WindowInteropHelper class (see namespace System.Windows.Interop). This class already impelements the IWin32Window ;)
So you can forget about the "OldWindow class" ... the usage stays the same
I know this is old, but just in case it will help someone else.
<div style="background-color: rgba(255, 0, 0, 0.5)">child</div>
Where rgba
is: red, green, blue, and a
is for transparency.
You probably want something like this overload of String.Join:
String.Join<T> Method (String, IEnumerable<T>)
Docs:
http://msdn.microsoft.com/en-us/library/dd992421.aspx
In your example, you'd use
String.Join("", Client);
Basically like this,
<?php
$link = ""; // Link goes here!
print "<a href="'.$link.'">Link</a>";
?>
//path to the directory to search/scan
$directory = "";
//echo "$directory"
//get all files in a directory. If any specific extension needed just have to put the .extension
//$local = glob($directory . "*");
$local = glob("" . $directory . "{*.jpg,*.gif,*.png}", GLOB_BRACE);
//print each file name
echo "<ul>";
foreach($local as $item)
{
echo '<li><a href="'.$item.'">'.$item.'</a></li>';
}
echo "</ul>";
in the example below I exclude
spring-boot-starter-tomcat
compile("org.springframework.boot:spring-boot-starter-web") {
//by both name and group
exclude group: 'org.springframework.boot', module: 'spring-boot-starter-tomcat'
}
I think you also need to a get a copy not a slice of dataframe if you wanna add columns later.
msk = np.random.rand(len(df)) < 0.8
train, test = df[msk].copy(deep = True), df[~msk].copy(deep = True)
On top of PoolingHttpClientConnectionManager
along with Registry<ConnectionSocketFactory> socketFactoryRegistry = RegistryBuilder.<ConnectionSocketFactory> create().register("https", sslFactory).build();
If you want an asynchronous httpclient using PoolingNHttpClientConnectionManager
the code shoudl be similar to following
SSLContextBuilder builder = SSLContexts.custom();
builder.loadTrustMaterial(null, new TrustStrategy() {
@Override
public boolean isTrusted(X509Certificate[] chain, String authType)
throws CertificateException {
return true;
}
});
SSLContext sslContext = builder.build();
SchemeIOSessionStrategy sslioSessionStrategy = new SSLIOSessionStrategy(sslContext,
new HostnameVerifier(){
@Override
public boolean verify(String hostname, SSLSession session) {
return true;// TODO as of now allow all hostnames
}
});
Registry<SchemeIOSessionStrategy> sslioSessionRegistry = RegistryBuilder.<SchemeIOSessionStrategy>create().register("https", sslioSessionStrategy).build();
PoolingNHttpClientConnectionManager ncm = new PoolingNHttpClientConnectionManager(new DefaultConnectingIOReactor(),sslioSessionRegistry);
CloseableHttpAsyncClient asyncHttpClient = HttpAsyncClients.custom().setConnectionManager(ncm).build();
asyncHttpClient.start();
Follow as in picture for removing that lint error and adding automatic fix by addin g--fix in package.json
class HexToDecimal
{
static void Main()
{
while (true)
{
Console.Write("Enter digit number to convert: ");
int n = int.Parse(Console.ReadLine()); // set hexadecimal digit number
Console.Write("Enter hexadecimal number: ");
string str = Console.ReadLine();
str.Reverse();
char[] ch = str.ToCharArray();
int[] intarray = new int[n];
decimal decimalval = 0;
for (int i = ch.Length - 1; i >= 0; i--)
{
if (ch[i] == '0')
intarray[i] = 0;
if (ch[i] == '1')
intarray[i] = 1;
if (ch[i] == '2')
intarray[i] = 2;
if (ch[i] == '3')
intarray[i] = 3;
if (ch[i] == '4')
intarray[i] = 4;
if (ch[i] == '5')
intarray[i] = 5;
if (ch[i] == '6')
intarray[i] = 6;
if (ch[i] == '7')
intarray[i] = 7;
if (ch[i] == '8')
intarray[i] = 8;
if (ch[i] == '9')
intarray[i] = 9;
if (ch[i] == 'A')
intarray[i] = 10;
if (ch[i] == 'B')
intarray[i] = 11;
if (ch[i] == 'C')
intarray[i] = 12;
if (ch[i] == 'D')
intarray[i] = 13;
if (ch[i] == 'E')
intarray[i] = 14;
if (ch[i] == 'F')
intarray[i] = 15;
decimalval += intarray[i] * (decimal)Math.Pow(16, ch.Length - 1 - i);
}
Console.WriteLine(decimalval);
}
}
}
List is an interface so you can't instanciate it. Use any of its implementatons instead e.g.
List<Object> object = new List<Object>();
About List : you can use any object as a generic param for it instance:
List<?> list = new ArrayList<String>();
or
List<?> list = new ArrayList<Integer>();
While using List<Object>
this declaration is invalid because it will be type missmatch.
If you wish to run GET
request and use pure curl just add --get
to @Jacob's solution.
Here is an example:
curl -v --get --data-urlencode "access_token=$(cat .fb_access_token)" https://graph.facebook.com/me/feed
There are two ways to change the dialog button color.
Basic Way
If you just want to change in an activity, write the below two lines after alertDialog.show();
alertDialog.getButton(AlertDialog.BUTTON_POSITIVE).setTextColor(getResources().getColor(R.color.colorPrimary));
alertDialog.getButton(AlertDialog.BUTTON_NEGATIVE).setTextColor(getResources().getColor(R.color.colorPrimaryDark));
Recommended
I'll recommend adding a theme for AlertDialog
in styles.xml
so you don't have to write the same code again and again in each activity/dialog call. You can just create a style and apply that theme on the dialog box. So whenever you want to change the color of AlertDialog box, just change color in styles.xml and all the dialog boxes will be updated in the whole application.
<style name="AlertDialogTheme" parent="Theme.AppCompat.Light.Dialog.Alert">
<item name="colorAccent">@color/colorPrimary</item>
</style>
And apply the theme in AlertDialog.Builder
AlertDialog.Builder builder = new AlertDialog.Builder(this, R.style.AlertDialogTheme);
STEP : 1
@IBOutlet var viewTap: UIView!
STEP : 2
var tapGesture = UITapGestureRecognizer()
STEP : 3
override func viewDidLoad() {
super.viewDidLoad()
// TAP Gesture
tapGesture = UITapGestureRecognizer(target: self, action: #selector(ViewController.myviewTapped(_:)))
tapGesture.numberOfTapsRequired = 1
tapGesture.numberOfTouchesRequired = 1
viewTap.addGestureRecognizer(tapGesture)
viewTap.isUserInteractionEnabled = true
}
STEP : 4
func myviewTapped(_ sender: UITapGestureRecognizer) {
if self.viewTap.backgroundColor == UIColor.yellow {
self.viewTap.backgroundColor = UIColor.green
}else{
self.viewTap.backgroundColor = UIColor.yellow
}
}
OUTPUT
For makefile projects, the accepted solution fails, due to a bug in Visual Studio (which is present at least up until version 2012 - I haven't yet tested 2013). This bug is detailed here.
In order to have the console pause after program termination on a makefile project, perform these steps (this may differ for versions other than 2010 - 2012):
1) Pass - EDIT: see below./SUBSYSTEM:CONSOLE
to the linker.
2) Open your project file (.vcxproj) in a text editor.
3) Inside the root <project>
tag, insert the following:
<ItemDefinitionGroup> <Link> <SubSystem>Console</SubSystem> </Link> </ItemDefinitionGroup>
4) Reload the project in your solution.
5) Run the program without debugging (CTRL + F5).
EDIT:
As per my comment below, setting the linker option /SUBSYSTEM:CONSOLE
is actually irrelevant for makefile projects (and not necessarily even possible, if you are using a compiler other than MSVC). All that matters is that the setting is added to the .vcxproj file, as per step 3 above.
Try:
//Difference in days
var diff = Math.floor(( start - end ) / 86400000);
alert(diff);
For Mac,
login to mysql server.
execute the following command:
SHOW VARIABLES LIKE "%version%";
use the accepted answer / this was the answer to another (already deleted) question
@karopastal
add a ref
attribute to your <TextField />
component and call getValue() on it, like this:
Component:
<TextField ref="myField" />
Using getValue:
this.refs.myField.getValue()
The number of digits of an integer n
in any base is trivially obtained by dividing until you're done:
unsigned int number_of_digits = 0;
do {
++number_of_digits;
n /= base;
} while (n);
If the number is coming from a model, I found this to be a nice patch to the model:
def iterableQuantity(self):
return range(self.quantity)
I did this in MySql and it updated multiple columns in a single record, so try this if you are using MySql as your server:
"UPDATE creditor_tb SET credit_amount='" & CDbl(cur_amount) & "'
, totalamount_to_pay='" & current_total & "',
WHERE credit_id='" & lbcreditId.Text & "'".
However, I was coding in vb.net using MySql server, but you can take it to your favorite programming language as far as you are using MySql as your server.
Using coalesce() converts null to 0:
$query = Model::where('field1', 1)
->whereNull('field2')
->where(DB::raw('COALESCE(datefield_at,0)'), '<', $date)
;
Without any SMTP server sending mail,use this code for sending mail....
click below for mail sending code
listen guys first you can do this less secure your gmail account after send mail with your gmail account
You can use this php.ini setting
;smtp = smtp.gmail.com
;smtp-port = 25
;sendmail_from = my gmail is here
And sendmail.ini settings
smtp_server = smtp.gmail.com
smtp_port = 465
smtp_ssl = auto
auth_username = my gmail is here
auth_password = password
hostname = localhost
you can try this changes and i hope this code sent mail....
Mine started working when I set AllowDBNull
to True on a date field on a data table in the xsd file.
I don't know about MySQL, but in MS SQL, you can use the column index in the order by
clause. I've done this before when doing counts with group by
s as it tends to be easier to work with.
So
SELECT COUNT(id), `Tag` from `images-tags`
GROUP BY `Tag`
ORDER BY COUNT(id) DESC
LIMIT 20
Becomes
SELECT COUNT(id), `Tag` from `images-tags`
GROUP BY `Tag`
ORDER 1 DESC
LIMIT 20
xxdiff is lightweight if that's what you're after.
The better pattern is to create a standalone BroadcastReceiver
. This insures that your app can respond to the broadcast, whether or not the Service
is running. In fact, using this pattern may remove the need for a constant-running Service
altogether.
Register the BroadcastReceiver
in your Manifest, and create a separate class/file for it.
Eg:
<receiver android:name=".FooReceiver" >
<intent-filter >
<action android:name="android.provider.Telephony.SMS_RECEIVED" />
</intent-filter>
</receiver>
When the receiver runs, you simply pass an Intent
(Bundle
) to the Service
, and respond to it in onStartCommand()
.
Eg:
public class FooReceiver extends BroadcastReceiver {
@Override
public void onReceive(Context context, Intent intent) {
// do your work quickly!
// then call context.startService();
}
}
Use
$(document).on("click", "#btn_a", function(){
alert ('button clicked');
});
to add the listener for the dynamically created button.
alert($("#btn_a").val());
will give you the value of the button