C++ programs are translated to assembly programs during the generation of machine code from the source code. It would be virtually wrong to say assembly is slower than C++. Moreover, the binary code generated differs from compiler to compiler. So a smart C++ compiler may produce binary code more optimal and efficient than a dumb assembler's code.
However I believe your profiling methodology has certain flaws. The following are general guidelines for profiling:
You can do the following. Add your ggplot code after the first line of code and end with dev.off()
.
tiff("test.tiff", units="in", width=5, height=5, res=300)
# insert ggplot code
dev.off()
res=300
specifies that you need a figure with a resolution of 300 dpi. The figure file named 'test.tiff' is saved in your working directory.
Change width
and height
in the code above depending on the desired output.
Note that this also works for other R
plots including plot
, image
, and pheatmap
.
Other file formats
In addition to TIFF, you can easily use other image file formats including JPEG, BMP, and PNG. Some of these formats require less memory for saving.
Use FileSaver.js
. It supports Chrome, Edge, Firefox, and IE 10+ (and probably IE < 10 with a few "polyfills" - see Note 4). FileSaver.js
implements the saveAs() FileSaver interface in browsers that do not natively support it:
https://github.com/eligrey/FileSaver.js
Minified version is really small at < 2.5KB, gzipped < 1.2KB.
Usage:
/* TODO: replace the blob content with your byte[] */
var blob = new Blob([yourBinaryDataAsAnArrayOrAsAString], {type: "application/octet-stream"});
var fileName = "myFileName.myExtension";
saveAs(blob, fileName);
You might need Blob.js in some browsers (see Note 3). Blob.js implements the W3C Blob interface in browsers that do not natively support it. It is a cross-browser implementation:
https://github.com/eligrey/Blob.js
Consider StreamSaver.js if you have files larger than blob's size limitations.
Complete example:
/* Two options_x000D_
* 1. Get FileSaver.js from here_x000D_
* https://github.com/eligrey/FileSaver.js/blob/master/FileSaver.min.js -->_x000D_
* <script src="FileSaver.min.js" />_x000D_
*_x000D_
* Or_x000D_
*_x000D_
* 2. If you want to support only modern browsers like Chrome, Edge, Firefox, etc., _x000D_
* then a simple implementation of saveAs function can be:_x000D_
*/_x000D_
function saveAs(blob, fileName) {_x000D_
var url = window.URL.createObjectURL(blob);_x000D_
_x000D_
var anchorElem = document.createElement("a");_x000D_
anchorElem.style = "display: none";_x000D_
anchorElem.href = url;_x000D_
anchorElem.download = fileName;_x000D_
_x000D_
document.body.appendChild(anchorElem);_x000D_
anchorElem.click();_x000D_
_x000D_
document.body.removeChild(anchorElem);_x000D_
_x000D_
// On Edge, revokeObjectURL should be called only after_x000D_
// a.click() has completed, atleast on EdgeHTML 15.15048_x000D_
setTimeout(function() {_x000D_
window.URL.revokeObjectURL(url);_x000D_
}, 1000);_x000D_
}_x000D_
_x000D_
(function() {_x000D_
// convert base64 string to byte array_x000D_
var byteCharacters = atob("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");_x000D_
var byteNumbers = new Array(byteCharacters.length);_x000D_
for (var i = 0; i < byteCharacters.length; i++) {_x000D_
byteNumbers[i] = byteCharacters.charCodeAt(i);_x000D_
}_x000D_
var byteArray = new Uint8Array(byteNumbers);_x000D_
_x000D_
// now that we have the byte array, construct the blob from it_x000D_
var blob1 = new Blob([byteArray], {type: "application/octet-stream"});_x000D_
_x000D_
var fileName1 = "cool.gif";_x000D_
saveAs(blob1, fileName1);_x000D_
_x000D_
// saving text file_x000D_
var blob2 = new Blob(["cool"], {type: "text/plain"});_x000D_
var fileName2 = "cool.txt";_x000D_
saveAs(blob2, fileName2);_x000D_
})();
_x000D_
Tested on Chrome, Edge, Firefox, and IE 11 (use FileSaver.js
for supporting IE 11).
You can also save from a canvas
element. See https://github.com/eligrey/FileSaver.js#saving-a-canvas.
Demos: https://eligrey.com/demos/FileSaver.js/
Blog post by author of FileSaver.js
: http://eligrey.com/blog/post/saving-generated-files-on-the-client-side
Note 1: Browser support: https://github.com/eligrey/FileSaver.js#supported-browsers
Note 2: Failed to execute 'atob' on 'Window'
Note 3: Polyfill for browsers not supporting Blob: https://github.com/eligrey/Blob.js
See http://caniuse.com/#search=blob
Note 4: IE < 10 support (I've not tested this part):
https://github.com/eligrey/FileSaver.js#ie--10
https://github.com/eligrey/FileSaver.js/issues/56#issuecomment-30917476
Downloadify is a Flash-based polyfill for supporting IE6-9: https://github.com/dcneiner/downloadify (I don't recommend Flash-based solutions in general, though.)
Demo using Downloadify and FileSaver.js for supporting IE6-9 also: http://sheetjs.com/demos/table.html
Note 5: Creating a BLOB from a Base64 string in JavaScript
Note 6: FileSaver.js
examples: https://github.com/eligrey/FileSaver.js#examples
here is another solution...
System.IO.Stream st = new System.IO.StreamReader (picturePath).BaseStream;
byte[] buffer = new byte[4096];
System.IO.MemoryStream m = new System.IO.MemoryStream ();
while (st.Read (buffer,0,buffer.Length) > 0) {
m.Write (buffer, 0, buffer.Length);
}
imgView.Tag = m.ToArray ();
st.Close ();
m.Close ();
hope it helps!
They serve the actual image inside CSS so there will be less HTTP requests per page.
The problem with UTF-8 is that it is not the most space efficient encoding. Also, some random binary byte sequences are invalid UTF-8 encoding. So you can't just interpret a random binary byte sequence as some UTF-8 data because it will be invalid UTF-8 encoding. The benefit of this constrain on the UTF-8 encoding is that it makes it robust and possible to locate multi byte chars start and end whatever byte we start looking at.
As a consequence, if encoding a byte value in the range [0..127] would need only one byte in UTF-8 encoding, encoding a byte value in the range [128..255] would require 2 bytes ! Worse than that. In JSON, control chars, " and \ are not allowed to appear in a string. So the binary data would require some transformation to be properly encoded.
Let see. If we assume uniformly distributed random byte values in our binary data then, on average, half of the bytes would be encoded in one bytes and the other half in two bytes. The UTF-8 encoded binary data would have 150% of the initial size.
Base64 encoding grows only to 133% of the initial size. So Base64 encoding is more efficient.
What about using another Base encoding ? In UTF-8, encoding the 128 ASCII values is the most space efficient. In 8 bits you can store 7 bits. So if we cut the binary data in 7 bit chunks to store them in each byte of an UTF-8 encoded string, the encoded data would grow only to 114% of the initial size. Better than Base64. Unfortunately we can't use this easy trick because JSON doesn't allow some ASCII chars. The 33 control characters of ASCII ( [0..31] and 127) and the " and \ must be excluded. This leaves us only 128-35 = 93 chars.
So in theory we could define a Base93 encoding which would grow the encoded size to 8/log2(93) = 8*log10(2)/log10(93) = 122%. But a Base93 encoding would not be as convenient as a Base64 encoding. Base64 requires to cut the input byte sequence in 6bit chunks for which simple bitwise operation works well. Beside 133% is not much more than 122%.
This is why I came independently to the common conclusion that Base64 is indeed the best choice to encode binary data in JSON. My answer presents a justification for it. I agree it isn't very attractive from the performance point of view, but consider also the benefit of using JSON with it's human readable string representation easy to manipulate in all programming languages.
If performance is critical than a pure binary encoding should be considered as replacement of JSON. But with JSON my conclusion is that Base64 is the best.
onchange
will work only if the value of the textbox changed compared to the value it had before, so for the first time it won't work because the state didn't change.
So it is better to use onblur
event or on submitting the form.
function checkTextField(field) {_x000D_
document.getElementById("error").innerText =_x000D_
(field.value === "") ? "Field is empty." : "Field is filled.";_x000D_
}
_x000D_
<input type="text" onblur="checkTextField(this);" />_x000D_
<p id="error"></p>
_x000D_
Not so hard:
#include <thread>
void Test::runMultiThread()
{
std::thread t1(&Test::calculate, this, 0, 10);
std::thread t2(&Test::calculate, this, 11, 20);
t1.join();
t2.join();
}
If the result of the computation is still needed, use a future instead:
#include <future>
void Test::runMultiThread()
{
auto f1 = std::async(&Test::calculate, this, 0, 10);
auto f2 = std::async(&Test::calculate, this, 11, 20);
auto res1 = f1.get();
auto res2 = f2.get();
}
you should do those steps:
CoreLocation.framework
to BuildPhases -> Link Binary With Libraries (no longer necessary as of XCode 7.2.1)CoreLocation
to your class - most likely ViewController.swiftCLLocationManagerDelegate
to your class declarationNSLocationWhenInUseUsageDescription
and NSLocationAlwaysUsageDescription
to plistinit location manager:
locationManager = CLLocationManager()
locationManager.delegate = self;
locationManager.desiredAccuracy = kCLLocationAccuracyBest
locationManager.requestAlwaysAuthorization()
locationManager.startUpdatingLocation()
get User Location By:
func locationManager(_ manager: CLLocationManager, didUpdateLocations locations: [CLLocation]) {
let locValue:CLLocationCoordinate2D = manager.location!.coordinate
print("locations = \(locValue.latitude) \(locValue.longitude)")
}
SIGABRT
is commonly used by libc and other libraries to abort the program in case of critical errors. For example, glibc sends an SIGABRT
in case of a detected double-free or other heap corruptions.
Also, most assert
implementations make use of SIGABRT
in case of a failed assert.
Furthermore, SIGABRT
can be sent from any other process like any other signal. Of course, the sending process needs to run as same user or root.
You may try this way. just use a function to get your object
def get_object(self, id):
try:
return Comment.objects.get(pk=id)
except Comment.DoesNotExist:
return False
You must instruct your logger not to send its messages on up to its parent logger:
...
import java.util.logging.*;
...
Logger logger = Logger.getLogger(this.getClass().getName());
logger.setUseParentHandlers(false);
...
However, this should be done before adding any more handlers to logger.
SELECT student, SUM(mark1+mark2+mark3+....+markn) AS Total FROM your_table
xhr.file = file;
; the file object is not supposed to be attached this way.xhr.send(file)
doesn't send the file. You have to use the FormData
object to wrap the file into a multipart/form-data
post data object:
var formData = new FormData();
formData.append("thefile", file);
xhr.send(formData);
After that, the file can be access in $_FILES['thefile']
(if you are using PHP).
Remember, MDC and Mozilla Hack demos are your best friends.
EDIT: The (2) above was incorrect. It does send the file, but it would send it as raw post data. That means you would have to parse it yourself on the server (and it's often not possible, depend on server configuration). Read how to get raw post data in PHP here.
If downgrading from pip version 10 because of PyCharm manage.py or other python errors:
python -m pip install pip==9.0.1
When you're doing this
var model = @Html.Raw(Json.Encode(Model));
You're probably getting a JSON string, and not a JavaScript object.
You need to parse it in to an object:
var model = JSON.parse(model); //or $.parseJSON() since if jQuery is included
console.log(model.Sections);
Ryan Stewart's answer was almost there. In the case where you actually don't want to delete your local changes, there's a workflow you can use to merge:
git status
. It will give you a list of unmerged files.git commit
Git will commit just the merges into a new commit. (In my case, I had additional added files on disk, which weren't lumped into that commit.)
Git then considers the merge successful and allows you to move forward.
You can also try typecasting it with string.
package main
import "fmt"
func main() {
fmt.Println(string("Hello"[1]))
}
Assume that you have 2 branches,
"branchA" : includes commits you want to copy (from "commitA" to "commitB"
"branchB" : the branch you want the commits to be transferred from "branchA"
1)
git checkout <branchA>
2) get the IDs of "commitA" and "commitB"
3)
git checkout <branchB>
4)
git cherry-pick <commitA>^..<commitB>
5) In case you have a conflict, solve it and type
git cherry-pick --continue
to continue the cherry-pick process.
Simple Alternative
Just use a query string.
Routing
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = RouteParameter.Optional }
);
Controller
public class TestController : ApiController
{
public IEnumerable<SomeViewModel> Get()
{
}
public SomeViewModel GetById(int objectId)
{
}
}
Requests
GET /Test
GET /Test?objectId=1
Note
Keep in mind that the query string param should not be "id" or whatever the parameter is in the configured route.
In recent Oracle versions the COST represent the amount of time that the optimiser expects the query to take, expressed in units of the amount of time required for a single block read.
So if a single block read takes 2ms and the cost is expressed as "250", the query could be expected to take 500ms to complete.
The optimiser calculates the cost based on the estimated number of single block and multiblock reads, and the CPU consumption of the plan. the latter can be very useful in minimising the cost by performing certain operations before others to try and avoid high CPU cost operations.
This raises the question of how the optimiser knows how long operations take. recent Oracle versions allow the collections of "system statistics", which are definitely not to be confused with statistics on tables or indexes. The system statistics are measurements of the performance of the hardware, mostly importantly:
These numbers can vary greatly according to the operating environment of the system, and different sets of statistics can be stored for "daytime OLTP" operations and "nighttime batch reporting" operations, and for "end of month reporting" if you wish.
Given these sets of statistics, a given query execution plan can be evaluated for cost in different operating environments, which might promote use of full table scans at some times or index scans at others.
The cost is not perfect, but the optimiser gets better at self-monitoring with every release, and can feedback the actual cost in comparison to the estimated cost in order to make better decisions for the future. this also makes it rather more difficult to predict.
Note that the cost is not necessarily wall clock time, as parallel query operations consume a total amount of time across multiple threads.
In older versions of Oracle the cost of CPU operations was ignored, and the relative costs of single and multiblock reads were effectively fixed according to init parameters.
In addition to the answer
1. Open POSTMAN
2. Click on "import" tab on the upper left side.
3. Select the Raw Text option and paste your cURL command.
4. Hit import and you will have the command in your Postman builder!
5. If -u admin:admin are not imported, just go to the Authorization
tab, select Basic Auth -> enter the user name eg admin and password eg admin.
This will automatically generate Authorization header based on Base64 encoder
SELECT <...>
FROM A.table1 t1 JOIN B.table2 t2 ON t2.column2 = t1.column1;
Just make sure that in the SELECT line you specify which table columns you are using, either by full reference, or by alias. Any of the following will work:
SELECT *
SELECT t1.*,t2.column2
SELECT A.table1.column1, t2.*
etc.
Use the start and end delimiters: ^abc$
There is a trick you can use with templates to provide H file only constants.
(note, this is an ugly example, but works verbatim in at least in g++ 4.6.1.)
(values.hpp file)
#include <string>
template<int dummy>
class tValues
{
public:
static const char* myValue;
};
template <int dummy> const char* tValues<dummy>::myValue = "This is a value";
typedef tValues<0> Values;
std::string otherCompUnit(); // test from other compilation unit
(main.cpp)
#include <iostream>
#include "values.hpp"
int main()
{
std::cout << "from main: " << Values::myValue << std::endl;
std::cout << "from other: " << otherCompUnit() << std::endl;
}
(other.cpp)
#include "values.hpp"
std::string otherCompUnit () {
return std::string(Values::myValue);
}
Compile (e.g. g++ -o main main.cpp other.cpp && ./main) and see two compilation units referencing the same constant declared in a header:
from main: This is a value
from other: This is a value
In MSVC, you may instead be able to use __declspec(selectany)
For example:
__declspec(selectany) const char* data = "My data";
The ngRoute module is no longer part of the core angular.js
file. If you are continuing to use $routeProvider then you will now need to include angular-route.js
in your HTML:
<script src="angular.js">
<script src="angular-route.js">
You also have to add ngRoute
as a dependency for your application:
var app = angular.module('MyApp', ['ngRoute', ...]);
If instead you are planning on using angular-ui-router
or the like then just remove the $routeProvider
dependency from your module .config()
and substitute it with the relevant provider of choice (e.g. $stateProvider
). You would then use the ui.router
dependency:
var app = angular.module('MyApp', ['ui.router', ...]);
if (myReader["Additional"] != DBNull.Value)
{
ltlAdditional.Text = "contains data";
}
else
{
ltlAdditional.Text = "is null";
}
If you are using Rails
(or a standalone ActiveSupport
), starting from version 6.1
, there is a compact_blank
method which removes blank
values from arrays.
It uses Object#blank?
under the hood for determining if an item is blank.
["Kathmandu", "Pokhara", "", "Dharan", nil, "Butwal"].compact_blank
# => ["Kathmandu", "Pokhara", "Dharan", "Butwal"]
[1, "", nil, 2, " ", [], {}, false, true].compact_blank
# => [1, 2, true]
Here is a link to the docs and a link to the relative PR.
A destructive variant is also available. See Array#compact_blank!
.
If you need to remove only nil
values,
please, consider using Ruby build-in Array#compact
and Array#compact!
methods.
["a", nil, "b", nil, "c", nil].compact
# => ["a", "b", "c"]
If you have multiple numeric fields, I suggest subclassing UITextField to create a NumericTextField that always displays a numeric keyboard with a done button. Then, simply associate your numeric fields with this class in the Interface Builder and you won't need any additional code in any of your View Controllers. The following is Swift 3.0 class that I'm using in Xcode 8.0.
class NumericTextField: UITextField {
let numericKbdToolbar = UIToolbar()
// MARK: Initilization
required init?(coder aDecoder: NSCoder) {
super.init(coder: aDecoder)
self.initialize()
}
override init(frame: CGRect) {
super.init(frame: frame)
self.initialize()
}
// Sets up the input accessory view with a Done button that closes the keyboard
func initialize()
{
self.keyboardType = UIKeyboardType.numberPad
numericKbdToolbar.barStyle = UIBarStyle.default
let space = UIBarButtonItem(barButtonSystemItem: UIBarButtonSystemItem.flexibleSpace, target: nil, action: nil)
let callback = #selector(NumericTextField.finishedEditing)
let donebutton = UIBarButtonItem(barButtonSystemItem: UIBarButtonSystemItem.done, target: self, action: callback)
numericKbdToolbar.setItems([space, donebutton], animated: false)
numericKbdToolbar.sizeToFit()
self.inputAccessoryView = numericKbdToolbar
}
// MARK: On Finished Editing Function
func finishedEditing()
{
self.resignFirstResponder()
}
}
Swift 4.2
class NumericTextField: UITextField {
let numericKbdToolbar = UIToolbar()
// MARK: Initilization
required init?(coder aDecoder: NSCoder) {
super.init(coder: aDecoder)
self.initialize()
}
override init(frame: CGRect) {
super.init(frame: frame)
self.initialize()
}
// Sets up the input accessory view with a Done button that closes the keyboard
func initialize()
{
self.keyboardType = UIKeyboardType.numberPad
numericKbdToolbar.barStyle = UIBarStyle.default
let space = UIBarButtonItem(barButtonSystemItem: UIBarButtonItem.SystemItem.flexibleSpace, target: nil, action: nil)
let callback = #selector(NumericTextField.finishedEditing)
let donebutton = UIBarButtonItem(barButtonSystemItem: UIBarButtonItem.SystemItem.done, target: self, action: callback)
numericKbdToolbar.setItems([space, donebutton], animated: false)
numericKbdToolbar.sizeToFit()
self.inputAccessoryView = numericKbdToolbar
}
// MARK: On Finished Editing Function
@objc func finishedEditing()
{
self.resignFirstResponder()
}
}
I use the following with python 3.8
string4 = f'{string1}{string2}{string3}'
For image use this
ClipOval(
child: Image.network(
'https://url to your image',
fit: BoxFit.fill,
),
);
While for Asset Image use this
ClipOval(
child: Image.asset(
'Path to your image',
fit: BoxFit.cover,
),
)
Enums are put into the typescript language to define a set of named constants. Using enums can make our life easier. The reason for this is that these constants are often easier to read than the value which the enum represents.
enum Direction {
Up = 1,
Down,
Left,
Right,
}
This example from the typescript docs explains very nicely how enums work. Notice that our first enum value (Up) is initialized with 1. All the following members of the number enum are then auto incremented from this value (i.e. Down = 2, Left = 3, Right = 4). If we didn't initialize the first value with 1 the enum would start at 0 and then auto increment (i.e. Down = 1, Left = 2, Right = 3).
We can access the values of the enum in the following manner:
Direction.Up; // first the enum name, then the dot operator followed by the enum value
Direction.Down;
Notice that this way we are much more descriptive in the way we write our code. Enums basically prevent us from using magic numbers (numbers which represent some entity because the programmer has given a meaning to them in a certain context). Magic numbers are bad because of the following reasons:
The easiest and purest method without relying on C headers is PyYaml (documentation), which can be installed via pip install pyyaml
:
#!/usr/bin/env python
import yaml
with open("example.yaml", 'r') as stream:
try:
print(yaml.safe_load(stream))
except yaml.YAMLError as exc:
print(exc)
And that's it. A plain yaml.load()
function also exists, but yaml.safe_load()
should always be preferred unless you explicitly need the arbitrary object serialization/deserialization provided in order to avoid introducing the possibility for arbitrary code execution.
Note the PyYaml project supports versions up through the YAML 1.1 specification. If YAML 1.2 specification support is needed, see ruamel.yaml as noted in this answer.
In my case, I have given this attribute to the input tag
data-date-start-date="0d"
data-date-end-date="0d"
I noticed "[" indexing columns fails to create levels when iterating:
for ( a_feature in convert.to.factors) {
feature.df[a_feature] <- factor(feature.df[a_feature]) }
It creates, e.g. for the "Status" column:
Status : Factor w/ 1 level "c(\"Success\", \"Fail\")" : NA NA NA ...
Which is remedied by using "[[" indexing:
for ( a_feature in convert.to.factors) {
feature.df[[a_feature]] <- factor(feature.df[[a_feature]]) }
Giving instead, as desired:
. Status : Factor w/ 2 levels "Success", "Fail" : 1 1 2 1 ...
Try something like this:
$link = @new mysqli($this->host, $this->user, $this->pass)
$statement = $link->prepare($sqlStatement);
if(!$statement)
{
$this->debug_mode('query', 'error', '#Query Failed<br/>' . $link->error);
return false;
}
For any CSS3-enabled browser you can use an adjacent sibling selector for styling your labels
input:checked + label {
color: white;
}
MDN's browser compatibility table says essentially all of the current, popular browsers (Chrome, IE, Firefox, Safari), on both desktop and mobile, are compatible.
You can also use
$(document).ready(function() {
//some even that will run ajax request - for example click on a button
var uname = $('#username').val();
$.ajax({
type: 'POST',
url: 'func.php', //this should be url to your PHP file
dataType: 'html',
data: {func: 'toptable', user_id: uname},
beforeSend: function() {
$('#right').html('checking');
},
complete: function() {},
success: function(html) {
$('#right').html(html);
}
});
});
And your func.php:
function toptable()
{
echo 'something happens in here';
}
Hope it helps somebody
<a href="javaScript:{openPopUp();}"></a>
<form action="actionName">
<div id="divId" style="display:none;">
UsreName:<input type="text" name="userName"/>
</div>
</form>
function openPopUp()
{
$('#divId').css('display','block');
$('#divId').dialog();
}
I had the same error but the problem was just an accidental problem with my model.
I accidentaly put...
public class MyModelDBContext : Context
{
public DBSet<MyModel> MyModels { get; set; }
}
...inside of the model class.
While unzipping will reveal the resources, the AndroidManifest.xml
will be encoded. apktool
can – among lots of other things – also decode this file.
To decode the application App.apk
into the folder App
, run
apktool decode App.apk App
apktool
is not included in the official Android SDK, but available using most packet repositories.
I'm a relative newbie, but here's what I came up with for one of my own projects, and it seems to work. There may be simpler ways to do it.
function getTime() {
var nowTimeDate = new Date();
var nowHour = nowTimeDate.getHours();
var nowMinutes = nowTimeDate.getMinutes();
var suffix = nowHour >= 12 ? "pm" : "am";
nowHour = (suffix == "pm" & (nowHour > 12 & nowHour < 24)) ? (nowHour - 12) : nowHour;
nowHour = nowHour == 0 ? 12 : nowHour;
nowMinutes = nowMinutes < 10 ? "0" + nowMinutes : nowMinutes;
var currentTime = nowHour + ":" + nowMinutes + suffix;
document.getElementById("currentTime").innerHTML = currentTime;
}
CSS code:
.hide{
display:none;
}
.show{
display:block;
}
Html code:
<button onclick="block_none()">Check Availability</button>
Javascript Code:
function block_none(){
document.getElementById('hidden-div').classList.add('show');
document.getElementById('button-id').classList.add('hide');
}
I use ls -R, piped to grep like this:
$ ls -R | grep -i "pattern"
where -R means recursively list all the files, and -i means case-insensitive. Finally, the patter could be something like this: "std*.h" or "^io" (anything that starts with "io" in the file name)
This worked for me. If field with name fieldA is clicked or any key entered it updates field with id fieldB.
jQuery("input[name='fieldA']").on("input", function() {
jQuery('#fieldB').val(jQuery(this).val());
});
If you have Python installed then the easiest way you can check the version number is by typing "python" in your command prompt. It will show you the version number and if it is running on 32 bit or 64 bit and some other information. For some applications you would want to have a latest version and sometimes not. It depends on what packages you want to install or use.
In bootstrap 4, you can use 'w-100' class (w as width, and 100 as 100%)
You can find documentation here: https://getbootstrap.com/docs/4.0/utilities/sizing/
YES, you can, because undefined is defined as undefined.
console.log(
/*global.*/undefined === window['undefined'] &&
/*global.*/undefined === (function(){})() &&
window['undefined'] === (function(){})()
) //true
your case:
test("value1", undefined, "value2")
you can also create your own undefined variable:
Object.defineProperty(this, 'u', {value : undefined});
console.log(u); //undefined
The .spec.ts files are for unit tests for individual components.
You can run Karma task runner through ng test
. In order to see code coverage of unit test cases for particular components run ng test --code-coverage
If you want to change the range to [0, 1], make sure the output data type is float
.
image = cv2.imread("lenacolor512.tiff", cv2.IMREAD_COLOR) # uint8 image
norm_image = cv2.normalize(image, None, alpha=0, beta=1, norm_type=cv2.NORM_MINMAX, dtype=cv2.CV_32F)
You need to use kill -9 59780
with 59780
replaced with found PID number (use lsof -wni tcp:3000
to see which process used 3000
port and get the process PID).
Or you can just modify your puma config change the tcp port tcp://127.0.0.1:3000
from 3000
to 9292
or other port that not been used.
Or you can start your rails app by using:
bundle exec puma -C config/puma.rb -b tcp://127.0.0.1:3001
Remove @Getter from private static field.
foo = File or Object. It is used in place of an object variable or file name.
Since it has been a couple years and it doesn't seem possible to do this (using npm alone), a solution to this problem is to use the Nexus Repository Manager (from Sonatype). Nexus supports multiple repositories, lets you order them, and also proxies/caches to improve speed.
A free version and pro/paid version exist. The feature that supports this is described at: https://help.sonatype.com/repomanager3/node-packaged-modules-and-npm-registries
The relevant information is duplicated below so if/when the above URL/link stops working the information is still here.
A repository group is the recommended way to expose all your npm registries repositories from the repository manager to your users, without needing any further client side configuration. A repository group allows you to expose the aggregated content of multiple proxy and hosted repositories with one URL to npm and other tools.
It lets you create private npm registries
A private npm registry can be used to upload your own packages as well as third-party packages.
And
To reduce duplicate downloads and improve download speeds for your developers and CI servers, you should proxy the registry hosted at https://registry.npmjs.org. By default npm accesses this registry directly. You can also proxy any other registries you require.
So a quick bulleted list of things you do to get this working is:
Install Nexus
Create a local/private repo (or point to your private repo on another server)
Create a GROUP that lists your private repo, and the public repo.
Configure your $HOME/.npmrc file to point to the "GROUP" just created.
Publish your private npm packages to the local repo.
Users now can run a one time setup.
npm config set registry https://nexus/content/groups/GROUP
npm install
.
npm install my-private-package
npm install lodash any-other-public-package
And both your public and private packages can be installed via a simple npm install
command. Nexus finds the package searching each repo configured in the group and returns the results. So npm still thinks there is just one registry but behind the curtain there are multiple repos being used.
IMPORTANT NOTE: When you publish your components, you'll need to specify the npm publish --registry https://nexus/content/repositories/private-repo my-private-package
command so your package is published to the correct repo.
You need slightly different error handling for powershell functions and for calling exe's, and you need to be sure to tell the caller of your script that it has failed. Building on top of Exec
from the library Psake, a script that has the structure below will stop on all errors, and is usable as a base template for most scripts.
Set-StrictMode -Version latest
$ErrorActionPreference = "Stop"
# Taken from psake https://github.com/psake/psake
<#
.SYNOPSIS
This is a helper function that runs a scriptblock and checks the PS variable $lastexitcode
to see if an error occcured. If an error is detected then an exception is thrown.
This function allows you to run command-line programs without having to
explicitly check the $lastexitcode variable.
.EXAMPLE
exec { svn info $repository_trunk } "Error executing SVN. Please verify SVN command-line client is installed"
#>
function Exec
{
[CmdletBinding()]
param(
[Parameter(Position=0,Mandatory=1)][scriptblock]$cmd,
[Parameter(Position=1,Mandatory=0)][string]$errorMessage = ("Error executing command {0}" -f $cmd)
)
& $cmd
if ($lastexitcode -ne 0) {
throw ("Exec: " + $errorMessage)
}
}
Try {
# Put all your stuff inside here!
# powershell functions called as normal and try..catch reports errors
New-Object System.Net.WebClient
# call exe's and check their exit code using Exec
Exec { setup.exe }
} Catch {
# tell the caller it has all gone wrong
$host.SetShouldExit(-1)
throw
}
A little bit late for the party, but it's an interessting question.
You can write your own inc.bat for incrementing a number.
It can increment numbers from 0 to 9998.
@echo off
if "%1"==":inc" goto :increment
call %0 :inc %counter0%
set counter0=%_cnt%
if %_overflow%==0 goto :exit
call %0 :inc %counter1%
set counter1=%_cnt%
if %_overflow%==0 goto :exit
call %0 :inc %counter2%
set counter2=%_cnt%
if %_overflow%==0 goto :exit
call %0 :inc %counter3%
set counter3=%_cnt%
goto :exit
:increment
set _overflow=0
set _cnt=%2
if "%_cnt%"=="" set _cnt=0
if %_cnt%==9 goto :overflow
if %_cnt%==8 set _cnt=9
if %_cnt%==7 set _cnt=8
if %_cnt%==6 set _cnt=7
if %_cnt%==5 set _cnt=6
if %_cnt%==4 set _cnt=5
if %_cnt%==3 set _cnt=4
if %_cnt%==2 set _cnt=3
if %_cnt%==1 set _cnt=2
if %_cnt%==0 set _cnt=1
goto :exit
:overflow
set _cnt=0
set _overflow=1
goto :exit
:exit
set count=%counter3%%counter2%%counter1%%counter0%
A sample for using it is here
@echo off
set counter0=0
set counter1=
set counter2=
set counter3=
:loop
call inc.bat
echo %count%
if not %count%==250 goto :loop
To retrieve an item from your config file, use the following function:
$this->config->item('item name');
Where item name is the $config array index you want to retrieve. For example, to fetch your language choice you'll do this:
$lang = $this->config->item('language');
The function returns FALSE (boolean) if the item you are trying to fetch does not exist.
If you are using the second parameter of the $this->config->load function in order to assign your config items to a specific index you can retrieve it by specifying the index name in the second parameter of the $this->config->item() function. Example:
// Loads a config file named blog_settings.php and assigns it to an index named "blog_settings"
$this->config->load('blog_settings', TRUE);
// Retrieve a config item named site_name contained within the blog_settings array
$site_name = $this->config->item('site_name', 'blog_settings');
// An alternate way to specify the same item:
$blog_config = $this->config->item('blog_settings');
$site_name = $blog_config['site_name'];
You can just write something quickly yourself:
public static class Extensions
{
public static string ToCSV(this DataTable table)
{
var result = new StringBuilder();
for (int i = 0; i < table.Columns.Count; i++)
{
result.Append(table.Columns[i].ColumnName);
result.Append(i == table.Columns.Count - 1 ? "\n" : ",");
}
foreach (DataRow row in table.Rows)
{
for (int i = 0; i < table.Columns.Count; i++)
{
result.Append(row[i].ToString());
result.Append(i == table.Columns.Count - 1 ? "\n" : ",");
}
}
return result.ToString();
}
}
And to test:
public static void Main()
{
DataTable table = new DataTable();
table.Columns.Add("Name");
table.Columns.Add("Age");
table.Rows.Add("John Doe", "45");
table.Rows.Add("Jane Doe", "35");
table.Rows.Add("Jack Doe", "27");
var bytes = Encoding.GetEncoding("iso-8859-1").GetBytes(table.ToCSV());
MemoryStream stream = new MemoryStream(bytes);
StreamReader reader = new StreamReader(stream);
Console.WriteLine(reader.ReadToEnd());
}
EDIT: Re your comments:
It depends on how you want your csv formatted but generally if the text contains special characters, you want to enclose it in double quotes ie: "my,text". You can add checking in the code that creates the csv to check for special characters and encloses the text in double quotes if it is. As for the .NET 2.0 thing, just create it as a helper method in your class or remove the word this in the method declaration and call it like so : Extensions.ToCsv(table);
If you create an object, you get a more readable output and also gain an object with properties you can access:
$path = 'HKLM:\SOFTWARE\Wow6432Node\Microsoft\.NETFramework'
$obj = New-Object -TypeName psobject
Get-Item -Path $path | Select-Object -ExpandProperty Property | Sort | % {
$command = [String]::Format('(Get-ItemProperty -Path "{0}" -Name "{1}")."{1}"', $path, $_)
$value = Invoke-Expression -Command $command
$obj | Add-Member -MemberType NoteProperty -Name $_ -Value $value}
Write-Output $obj | fl
Sample output: InstallRoot : C:\Windows\Microsoft.NET\Framework\
And the object: $obj.InstallRoot = C:\Windows\Microsoft.NET\Framework\
The truth of the matter is this is way more complicated than it needs to be. Here is a much better example, and much simpler:
$path = 'HKLM:\SOFTWARE\Wow6432Node\Microsoft\.NETFramework'
$objReg = Get-ItemProperty -Path $path | Select -Property *
$objReg is now a custom object where each registry entry is a property name. You can view the formatted list via:
write-output $objReg
InstallRoot : C:\Windows\Microsoft.NET\Framework\
DbgManagedDebugger : "C:\windows\system32\vsjitdebugger.exe"
And you have access to the object itself:
$objReg.InstallRoot
C:\Windows\Microsoft.NET\Framework\
"referencedColumnName" property is the name of the column in the table that you are making reference with the column you are anotating. Or in a short manner: it's the column referenced in the destination table. Imagine something like this: cars and persons. One person can have many cars but one car belongs only to one person (sorry, I don't like anyone else driving my car).
Table Person
name char(64) primary key
age intTable Car
car_registration char(32) primary key
car_brand (char 64)
car_model (char64)
owner_name char(64) foreign key references Person(name)
When you implement classes you will have something like
class Person{
...
}
class Car{
...
@ManyToOne
@JoinColumn([column]name="owner_name", referencedColumnName="name")
private Person owner;
}
EDIT: as @searchengine27 has commented, columnName
does not exist as a field in persistence section of Java7 docs. I can't remember where I took this property from, but I remember using it, that's why I'm leaving it in my example.
You could use the SizeMode property of the PictureBox Control and set it to Center. This will match the center of your image to the center of your picture box.
pictureBox1.SizeMode = PictureBoxSizeMode.CenterImage;
Hope it could help.
Use the -ExpandProperty
flag of Select-Object
$var=Get-WSManInstance -enumerate wmicimv2/win32_process | select -expand Priority
Update to answer the other question:
Note that you can as well just access the property:
$var=(Get-WSManInstance -enumerate wmicimv2/win32_process).Priority
So to get multiple of these into variables:
$var=Get-WSManInstance -enumerate wmicimv2/win32_process
$prio = $var.Priority
$pid = $var.ProcessID
//do the edit in your javascript
$('.signinform').submit(function() {
$(this).ajaxSubmit({
type : "POST",
//set the data type
dataType:'json',
url: 'index.php/user/signin', // target element(s) to be updated with server response
cache : false,
//check this in Firefox browser
success : function(response){ console.log(response); alert(response)},
error: onFailRegistered
});
return false;
});
//controller function
public function signin() {
$arr = array('a' => 1, 'b' => 2, 'c' => 3, 'd' => 4, 'e' => 5);
//add the header here
header('Content-Type: application/json');
echo json_encode( $arr );
}
This works for me (I'm using mac). Run this command
lsof -PiTCP -sTCP:LISTEN
This's going to display a list of ports that your syetem is using. Find the PID
that your node is running
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
node 17269 hientrq 16u IPv6 0xc42959c6fa30c3b9 0t0 TCP *:51524 (LISTEN)
node 17269 hientrq 19u IPv4 0xc42959c71ae86fc1 0t0 TCP localhost:1337 (LISTEN)
and run kill -9 [YOUR_PID]
In addition to the other (somewhat lengthy) answers: even ignoring old systems that support only 7-bit ASCII, basic problems with supplying binary data in text-mode are:
You are looking to see if a single value is in an array. Use in_array
.
However note that case is important, as are any leading or trailing spaces. Use var_dump
to find out the length of the strings too, and see if they fit.
`n
is a line feed character. Notepad (prior to Windows 10) expects linebreaks to be encoded as `r`n
(carriage return + line feed, CR-LF). Open the file in some useful editor (SciTE, Notepad++, UltraEdit-32, Vim, ...) and convert the linebreaks to CR-LF. Or use PowerShell:
(Get-Content $logpath | Out-String) -replace "`n", "`r`n" | Out-File $logpath
You should probably re-write the script to return a value rather than output it. Instead of:
a=$( script.sh ) # Now a is a string, either "success" or "Failed"
case "$a" in
success) echo script succeeded;;
Failed) echo script failed;;
esac
you would be able to do:
if script.sh > /dev/null; then
echo script succeeded
else
echo script failed
fi
It is much simpler for other programs to work with you script if they do not have to parse the output. This is a simple change to make. Just exit 0
instead of printing success
, and exit 1
instead of printing Failed
. Of course, you can also print those values as well as exiting with a reasonable return value, so that wrapper scripts have flexibility in how they work with the script.
SELECT to_char(to_date(month,'yyyy-mm'),'Mon yyyy'), nos
FROM (SELECT to_char(credit_date,'yyyy-mm') MONTH,count(*) nos
FROM HCN
WHERE TRUNC(CREDIT_dATE) BEtween '01-jul-2014' AND '30-JUN-2015'
AND CATEGORYCODECFR=22
--AND CREDIT_NOTE_NO IS NOT NULL
AND CANCELDATE IS NULL
GROUP BY to_char(credit_date,'yyyy-mm')
ORDER BY to_char(credit_date,'yyyy-mm') ) mm
Output:
Jul 2014 49
Aug 2014 35
Sep 2014 57
Oct 2014 50
Nov 2014 45
Dec 2014 88
Jan 2015 131
Feb 2015 112
Mar 2015 76
Apr 2015 45
May 2015 49
Jun 2015 40
I needed to do this recently and after trying a few different permutations (using onfocus, onclick of textbox etc), I finally settled on this...
<input id="autocomplete" name="autocomplete" type="text"
value="Choose Document">
<p>
<button type="submit" value="Submit" name="submit" id="submit" >
Submit
</button>
</p>
<script type="text/javascript">
$("#autocomplete").autocomplete(
{
source: '@Url.Content("~/Document/DocumentTypeAutoComplete/")' //<--ddl source
, minLength: 0 // <-- This is necessary to get the search going on blank input
, delay: 0
, select: function (event, ui)
{
if (ui.item) {
$("#autocomplete").val(ui.item.value);//<-- Place selection in the textbox
$("docForm").submit();
loadDocTypeCreatePartial(ui.item);
$("#submit").focus(); //This stops the drop down list from reopening
// after an item in the select box is chosen
// You can place the focus anywhere you'd like,
// I just chose my *submit* button
}
}
}).focus(function () {
// following line will autoselect textbox text
// making it easier for the user to overwrite whats in the
// textbox
$(this).select();
//The below line triggers the search function on an empty string
$(this).data("autocomplete").search('');
});
</script>
This opens the autocomplete ddl list on focus (Even if you have default text in your input box like I do above).
It also auto-selects the text in the text box to prevent the user from having to clear out the text.
Once an item is selected from the auto-complete list, it puts that item into the auto-complete input box and moves the focus to another control (thus preventing the auto-complete from reopening).
I plan on replacing it by adding dynamic Ajax calls to the very nice Chosen select lists with the Melting Ice upgrade when I get a chance.
Neither!
If you're asking; "what would a website visitor rather type, htm or html" - it's much better to give them a nice descriptive URL with no extension. If they get used to going to yoursite/contact.html and you change it to yoursite/contact.php you've broken that link. If you use yoursite/contact/ then there's no problem when you switch technology.
public class LmsEmpWfhUtils {
private LmsEmpWfhUtils()
{
// prevents access default paramater-less constructor
}
}
This prevents the default parameter-less constructor from being used elsewhere in your code.
Normally yes, .gitignore
is useful for everyone who wants to work with the repository. On occasion you'll want to ignore more private things (maybe you often create LOG
or something. In those cases you probably don't want to force that on anyone else.
You need to access the page_source
property:
from selenium import webdriver
browser = webdriver.Firefox()
browser.get("http://example.com")
html_source = browser.page_source
if "whatever" in html_source:
# do something
else:
# do something else
From the source code:
// Instance of WebViewClient that is the client callback.
private volatile WebViewClient mWebViewClient;
// Instance of WebChromeClient for handling all chrome functions.
private volatile WebChromeClient mWebChromeClient;
// SOME OTHER SUTFFF.......
/**
* Set the WebViewClient.
* @param client An implementation of WebViewClient.
*/
public void setWebViewClient(WebViewClient client) {
mWebViewClient = client;
}
/**
* Set the WebChromeClient.
* @param client An implementation of WebChromeClient.
*/
public void setWebChromeClient(WebChromeClient client) {
mWebChromeClient = client;
}
Using WebChromeClient allows you to handle Javascript dialogs, favicons, titles, and the progress. Take a look of this example: Adding alert() support to a WebView
At first glance, there are too many differences WebViewClient & WebChromeClient. But, basically: if you are developing a WebView that won't require too many features but rendering HTML, you can just use a WebViewClient
. On the other hand, if you want to (for instance) load the favicon of the page you are rendering, you should use a WebChromeClient
object and override the onReceivedIcon(WebView view, Bitmap icon)
.
Most of the times, if you don't want to worry about those things... you can just do this:
webView= (WebView) findViewById(R.id.webview);
webView.setWebChromeClient(new WebChromeClient());
webView.setWebViewClient(new WebViewClient());
webView.getSettings().setJavaScriptEnabled(true);
webView.loadUrl(url);
And your WebView will (in theory) have all features implemented (as the android native browser).
Use extension method
public static object ToSafeDbDateDBnull(this object objectstring)
{
try
{
if ((DateTime)objectstring >= SqlDateTime.MinValue)
{
return objectstring;
}
else
{
return DBNull.Value;
}
}
catch (Exception)
{
return DBNull.Value;
}
}
DateTime objdte = new DateTime(1000, 1, 1);
dte.ToSafeDbDateDBnull();
Unlike languages such as C, a Python variable is in scope for the whole of the function (or class, or module) where it appears, not just in the innermost "block". It is as though you declared int x
at the top of the function (or class, or module), except that in Python you don't have to declare variables.
Note that the existence of the variable x
is checked only at runtime -- that is, when you get to the print x
statement. If __name__
didn't equal "__main__"
then you would get an exception: NameError: name 'x' is not defined
.
Depending on which environment you are using to run the emulator, check the logs to see how the emulator is started. Mine is started as:
C:\Users\johan\AppData\Local\Android\Sdk\tools\emulator.exe -netdelay none -netspeed full -avd Nexus_5X_API_23
Then you add the -http-proxy option, in my case:
C:\Users\johan\AppData\Local\Android\Sdk\tools\emulator.exe -netdelay none -netspeed full -avd Nexus_5X_API_23 -http-proxy 192.168.0.22:8888
The easiest way to read from a file and write to a file:
//Read from a file
string something = File.ReadAllText("C:\\Rfile.txt");
//Write to a file
using (StreamWriter writer = new StreamWriter("Wfile.txt"))
{
writer.WriteLine(something);
}
The following works for me:
git diff master:foo foo
In the past, it may have been:
git diff foo master:foo
You just need to find the right multiplier, which can be easily calculated from the hist
object.
myhist <- hist(mtcars$mpg)
multiplier <- myhist$counts / myhist$density
mydensity <- density(mtcars$mpg)
mydensity$y <- mydensity$y * multiplier[1]
plot(myhist)
lines(mydensity)
A more complete version, with a normal density and lines at each standard deviation away from the mean (including the mean):
myhist <- hist(mtcars$mpg)
multiplier <- myhist$counts / myhist$density
mydensity <- density(mtcars$mpg)
mydensity$y <- mydensity$y * multiplier[1]
plot(myhist)
lines(mydensity)
myx <- seq(min(mtcars$mpg), max(mtcars$mpg), length.out= 100)
mymean <- mean(mtcars$mpg)
mysd <- sd(mtcars$mpg)
normal <- dnorm(x = myx, mean = mymean, sd = mysd)
lines(myx, normal * multiplier[1], col = "blue", lwd = 2)
sd_x <- seq(mymean - 3 * mysd, mymean + 3 * mysd, by = mysd)
sd_y <- dnorm(x = sd_x, mean = mymean, sd = mysd) * multiplier[1]
segments(x0 = sd_x, y0= 0, x1 = sd_x, y1 = sd_y, col = "firebrick4", lwd = 2)
This is bit tricky
Now a days most of website new techniques to save websites from scraping
1st Technique
Ctrl+U this will show you Page Source
2nd Technique
This one is small hack if the website has ajax like functionality.
Just Hover the mouse key on inspect element untill whole screen becomes just right click then and copy element
That's it you are good to go.
Solution 1: cast
String temp=(String)data.getParameterValue("request");
Solution 2: use typed map:
Map<String, String> param;
So you change Change the return type of your function
public String getParameterValue(String key)
{
if(params.containsKey(key))
{
return params.get(key);
}
return null;
}
and then no need for cast or toString
String temp=data.getParameterValue("request");
Disclaimer: I'm not a MySQL expert ... but this is my understanding of the issues.
I think TEXT is stored outside the mysql row, while I think VARCHAR is stored as part of the row. There is a maximum row length for mysql rows .. so you can limit how much other data you can store in a row by using the VARCHAR.
Also due to VARCHAR forming part of the row, I suspect that queries looking at that field will be slightly faster than those using a TEXT chunk.
In Access 2010, go to the Create tab on the ribbon. Click Macro. An "Action Catalog" panel should appear on the right side of the screen. Underneath, there's a section titled "In This Database." Clicking on one of the macro names should display its code.
Configure your webserver to send caching control HTTP headers for the script.
Fake headers in the HTML documents:
Change default C++ standard
From (COMPILE FILE FAILED) error: 'to_string' is not a member of 'std'
-std=c++98
To (COMPILE FILE SUCCESSFUL)
-std=c++11 or -std=c++14
Tested on Cygwin G++(GCC) 5.4.0
Step 1: Highlight the entire column (not including the header) of the column you wish to populate
Step 2: (Using Kutools) On the Insert dropdown, click "Fill Custom List"
Step 3: Click Edit
Step 4: Create your list (For Ex: 1, 2)
Step 5: Choose your new custom list and then click "Fill Range"
DONE!!!
One other method (apart from a delete batch request) I often use (based on app requirement) is to reset the persistent store. The implementation looks like this for iOS 10+ and Swift (assuming you have a CoreDataManager class):
let persistentContainer: NSPersistentContainer = {
let container = NSPersistentContainer(name: "<Data-Model-Name>“)
container.loadPersistentStores(completionHandler: { (storeDescription, err) in
if let err = err {
fatalError("loading of store failed: \(err)")
}
})
return container
}()
func resetPersistentStore() {
if let persistentStore = persistentContainer.persistentStoreCoordinator.persistentStores.last {
let storeURL = persistentContainer.persistentStoreCoordinator.url(for: persistentStore)
do {
try persistentContainer.persistentStoreCoordinator.destroyPersistentStore(at: storeURL, ofType: NSSQLiteStoreType, options: nil)
} catch {
print("failed to destroy persistent store:", error.localizedDescription)
}
do {
try persistentContainer.persistentStoreCoordinator.addPersistentStore(ofType: NSSQLiteStoreType, configurationName: nil, at: storeURL, options: nil)
} catch {
print("failed to re-add persistent store:", error.localizedDescription)
}
}
}
One advantage of this method is that it’s more straightforward especially when you have loads of data record for numerous entities in your core data. In which case a delete batch request would be memory intensive.
I advise you check out http://wurfl.io/
In a nutshell, if you import a tiny JS file:
<script type='text/javascript' src="//wurfl.io/wurfl.js"></script>
you will be left with a JSON object that looks like:
{
"complete_device_name":"Google Nexus 7",
"is_mobile":true,
"form_factor":"Tablet"
}
(that's assuming you are using a Nexus 7, of course) and you will be able to do things like:
if(WURFL.form_factor == "Tablet"){
//dostuff();
}
This is what you are looking for.
Disclaimer: I work for the company that offers this free service. Thanks.
Paul's answer is the one you're looking for. However, as a practical matter, I think you may be interested in the pattern I've been using in my own React+Redux apps.
Here's a stripped-down example from one of my routes, showing how you can define your component and export it as default with a single statement:
import React from 'react';
import { connect } from 'react-redux';
@connect((state, props) => ({
appVersion: state.appVersion
// other scene props, calculated from app state & route props
}))
export default class SceneName extends React.Component { /* ... */ }
(Note: I use the term "Scene" for the top-level component of any route).
I hope this is helpful. I think it's much cleaner-looking than the conventional connect( mapState, mapDispatch )( BareComponent )
java.lang.NoSuchMethodError: javax.servlet.ServletContext.getContextPath()Ljava/lang/String;
That method was added in Servlet 2.5.
So this problem can have at least 3 causes:
web.xml
is not declared conform Servlet 2.5 or newer.To solve it,
web.xml
complies Servlet 2.5 (or newer, at least the highest whatever your target runtime supports). For an example, see also somewhere halfway our servlets wiki page.servlet-api.jar
or j2ee.jar
in /WEB-INF/lib
or even worse, the JRE/lib
or JRE/lib/ext
. They do not belong there. This is a pretty common beginner's mistake in an attempt to circumvent compilation errors in an IDE, see also How do I import the javax.servlet API in my Eclipse project?.You can follow this Google JavaScript Style Guide
In general, use functionNamesLikeThis, variableNamesLikeThis, ClassNamesLikeThis, EnumNamesLikeThis, methodNamesLikeThis, and SYMBOLIC_CONSTANTS_LIKE_THIS.
EDIT: See nice collection of JavaScript Style Guides And Beautifiers.
The best code is no code at all:
The fundamental nature of coding is that our task, as programmers, is to recognize that every decision we make is a trade-off. […] Start with brevity. Increase the other dimensions as required by testing.
Consequently, less code is better code: Prefer ""
to string.Empty
or String.Empty
. Those two are six times longer with no added benefit — certainly no added clarity, as they express the exact same information.
A few compilers (usually the ones for microcontrollers) has a special feature implemented within recognizing literal binary numbers by prefix "0b..." preceding the number, although most compilers (C/C++ standards) don't have such feature and if it is the case, here it is my alternative solution:
#define B_0000 0
#define B_0001 1
#define B_0010 2
#define B_0011 3
#define B_0100 4
#define B_0101 5
#define B_0110 6
#define B_0111 7
#define B_1000 8
#define B_1001 9
#define B_1010 a
#define B_1011 b
#define B_1100 c
#define B_1101 d
#define B_1110 e
#define B_1111 f
#define _B2H(bits) B_##bits
#define B2H(bits) _B2H(bits)
#define _HEX(n) 0x##n
#define HEX(n) _HEX(n)
#define _CCAT(a,b) a##b
#define CCAT(a,b) _CCAT(a,b)
#define BYTE(a,b) HEX( CCAT(B2H(a),B2H(b)) )
#define WORD(a,b,c,d) HEX( CCAT(CCAT(B2H(a),B2H(b)),CCAT(B2H(c),B2H(d))) )
#define DWORD(a,b,c,d,e,f,g,h) HEX( CCAT(CCAT(CCAT(B2H(a),B2H(b)),CCAT(B2H(c),B2H(d))),CCAT(CCAT(B2H(e),B2H(f)),CCAT(B2H(g),B2H(h)))) )
// Using example
char b = BYTE(0100,0001); // Equivalent to b = 65; or b = 'A'; or b = 0x41;
unsigned int w = WORD(1101,1111,0100,0011); // Equivalent to w = 57155; or w = 0xdf43;
unsigned long int dw = DWORD(1101,1111,0100,0011,1111,1101,0010,1000); //Equivalent to dw = 3745774888; or dw = 0xdf43fd28;
Disadvantages (it's not such a big ones):
Advantages:
spending processor time
in pointless operations (like "?.. :..", "<<", "+"
) to the executable program (it may be performed hundred of times in the final application);"mainly in C"
compilers and C++ as well (template+enum solution works only in C++ compilers
);"enum solution" (usually 255 = reach enum definition limit)
, differently, "literal constant" limitations, in the compiler allows greater numbers;several header files
(in most cases not easily readable and understandable, and make the project become unnecessarily confused and extended, like that using "BOOST_BINARY()"
);The man pages is the best source of information you can find... and is at your fingertips: man mkdir
yields this about -p
switch:
-p, --parents
no error if existing, make parent directories as needed
Use case example: Assume I want to create directories hello/goodbye
but none exist:
$mkdir hello/goodbye
mkdir:cannot create directory 'hello/goodbye': No such file or directory
$mkdir -p hello/goodbye
$
-p
created both, hello
and goodbye
This means that the command will create all the directories necessaries to fulfill your request, not returning any error in case that directory exists.
About rlidwka
, Google has a very good memory for acronyms :). My search returned this for example: http://www.cs.cmu.edu/~help/afs/afs_acls.html
Directory permissions
l (lookup)
Allows one to list the contents of a directory. It does not allow the reading of files.
i (insert)
Allows one to create new files in a directory or copy new files to a directory.
d (delete)
Allows one to remove files and sub-directories from a directory.
a (administer)
Allows one to change a directory's ACL. The owner of a directory can always change the ACL of a directory that s/he owns, along with the ACLs of any subdirectories in that directory.
File permissions
r (read)
Allows one to read the contents of file in the directory.
w (write)
Allows one to modify the contents of files in a directory and use chmod on them.
k (lock)
Allows programs to lock files in a directory.
Hence rlidwka
means: All permissions on.
It's worth mentioning, as @KeithThompson pointed out in the comments, that not all Unix systems support ACL. So probably the rlidwka
concept doesn't apply here.
I submit that it is better to leave your data stacked as it is:
df = pandas.DataFrame(data, columns=['R_Number', 'C_Number', 'Avg', 'Std'])
# Possibly also this if these can always be the indexes:
# df = df.set_index(['R_Number', 'C_Number'])
Then it's a bit more intuitive to say
df.set_index(['R_Number', 'C_Number']).Avg.unstack(level=1)
This way it is implicit that you're seeking to reshape the averages, or the standard deviations. Whereas, just using pivot
, it's purely based on column convention as to what semantic entity it is that you are reshaping.
I found the best solution for this problem by using ON with $(document).
$(document).on('click', '#yourid', function() { alert("hello"); });
for id start with see below:
$(document).on('click', 'div[id^="start"]', function() {
alert ('hello'); });
finally after 1 week I not need to add onclick triger. I hope this will help many people
Pros: Host on Google has benefits
Cons:
I wonder if you can INCLUDE from Google, and then check the presence of some Global variable, or somesuch, and if absence load from your server?
You need to use Integer.parseInt(String)
private void jTextField2MouseClicked(java.awt.event.MouseEvent evt) {
if(evt.getSource()==jTextField2){
int jml = Integer.parseInt(jTextField3.getText());
jTextField1.setText(numberToWord(jml));
}
}
I did the below changes to AUTO-INCLUDE the files in the index html. So that when you add a file in the folder it will automatically be picked up from the folder, without you having to include the file in index.html
//// THIS WORKS FOR ME
///// in app.js or server.js
var app = express();
app.use("/", express.static(__dirname));
var fs = require("fs"),
function getFiles (dir, files_){
files_ = files_ || [];
var files = fs.readdirSync(dir);
for (var i in files){
var name = dir + '/' + files[i];
if (fs.statSync(name).isDirectory()){
getFiles(name, files_);
} else {
files_.push(name);
}
}
return files_;
}
//// send the files in js folder as variable/array
ejs = require('ejs');
res.render('index', {
'something':'something'...........
jsfiles: jsfiles,
});
///--------------------------------------------------
///////// in views/index.ejs --- the below code will list the files in index.ejs
<% for(var i=0; i < jsfiles.length; i++) { %>
<script src="<%= jsfiles[i] %>"></script>
<% } %>
Somehow, where you are using Sentry, you're not using its Facade, but the class itself. When you call a class through a Facade you're not really using statics, it's just looks like you are.
Do you have this:
use Cartalyst\Sentry\Sentry;
In your code?
Ok, but if this line is working for you:
$user = $this->sentry->register(array( 'username' => e($data['username']), 'email' => e($data['email']), 'password' => e($data['password']) ));
So you already have it instantiated and you can surely do:
$adminGroup = $this->sentry->findGroupById(5);
Yes there is, you can simply put <hr>
in your code where you want it, I already use it in one of my admin panel side bar.
Unlike some browsers, Java follows the HTTPS specification strictly when it comes to the server identity verification (RFC 2818, Section 3.1) and IP addresses.
When using a host name, it's possible to fall back to the Common Name in the Subject DN of the server certificate, instead of using the Subject Alternative Name.
When using an IP address, there must be a Subject Alternative Name entry (of type IP address, not DNS name) in the certificate.
You'll find more details about the specification and how to generate such a certificate in this answer.
You can have multiple versions of GCC on your box, to select the one you want to use call it with full path, e.g. instead of g++
use full path /usr/bin/g++
on command line (depends where your gcc lives).
For compiling projects it depends what system do you use, I'm not sure about Xcode (I'm happy with default atm) but when you use Makefiles you can set GXX=/usr/bin/g++ and so on.
EDIT
There's now a xcrun
script that can be queried to select appropriate version of build tools on mac. Apart from man xcrun
I've googled this explanation about xcode and command line tools which pretty much summarizes how to use it.
For example when you want to have a sorted collection or map
scrollHeight
is not only buggy, but doesn't work when your container has a hardcoded height (which is probably most cases, since you wanna get contents height without doing container.height()
itself)$('#outer')_x000D_
// Get children in array format, as we'll be reducing them into a single number_x000D_
.contents().toArray()_x000D_
// Filter out text and comment nodes, only allowing tags_x000D_
.filter(el => el.nodeType === 1)_x000D_
// Sum up all the children individual heights_x000D_
.reduce((accumulator, el) => $(el).outerHeight(true) + accumulator, 0);
_x000D_
Of course, this latter alternative only works when #outer
doesn't have immediate text childrens that take up space and you want to measure. Those are my 2 cents.
<div>
of which you can measure easily by doing $('#outer').children().height()
May be useful:
The code that calls the Trigger should go after the event is called.
For example, I have some code that I want to be executed when #expense_tickets value is changed, and also, when page is reload
$(function() {
$("#expense_tickets").change(function() {
// code that I want to be executed when #expense_tickets value is changed, and also, when page is reload
});
// now we trigger the change event
$("#expense_tickets").trigger("change");
})
It sounds to me like your column isn't a date column but a text column (varchar/nvarchar etc). You should store it in the database as a date, not a string.
If you have to store it as a string for some reason, store it in a sortable format e.g. yyyy/MM/dd.
As najmeddine shows, you could convert the column on every access, but I would try very hard not to do that. It will make the database do a lot more work - it won't be able to keep appropriate indexes etc. Whenever possible, store the data in a type appropriate to the data itself.
Just change
C:\Users\Giacomo B\AppData\Local\Android\sdk
to
C:\Users\Giacomo_B\AppData\Local\Android\sdk
If you are using log4j2, the solution from https://www.dontpanicblog.co.uk/2018/04/29/test-log4j2-with-junit/ allowed me to assert messages were logged.
The solution goes like this:
Define a log4j appender as an ExternalResource rule
public class LogAppenderResource extends ExternalResource {
private static final String APPENDER_NAME = "log4jRuleAppender";
/**
* Logged messages contains level and message only.
* This allows us to test that level and message are set.
*/
private static final String PATTERN = "%-5level %msg";
private Logger logger;
private Appender appender;
private final CharArrayWriter outContent = new CharArrayWriter();
public LogAppenderResource(org.apache.logging.log4j.Logger logger) {
this.logger = (org.apache.logging.log4j.core.Logger)logger;
}
@Override
protected void before() {
StringLayout layout = PatternLayout.newBuilder().withPattern(PATTERN).build();
appender = WriterAppender.newBuilder()
.setTarget(outContent)
.setLayout(layout)
.setName(APPENDER_NAME).build();
appender.start();
logger.addAppender(appender);
}
@Override
protected void after() {
logger.removeAppender(appender);
}
public String getOutput() {
return outContent.toString();
}
}
Define a test that use your ExternalResource rule
public class LoggingTextListenerTest {
@Rule public LogAppenderResource appender = new LogAppenderResource(LogManager.getLogger(LoggingTextListener.class));
private LoggingTextListener listener = new LoggingTextListener(); // Class under test
@Test
public void startedEvent_isLogged() {
listener.started();
assertThat(appender.getOutput(), containsString("started"));
}
}
Don't forget to have log4j2.xml as part of src/test/resources
In Visual Studio Code, by pressing Ctrl+ and Ctrl- you can change the overall font size of the IDE. This helps faster than changing settings in every session. Hope it helps...
Another table that is useful is:
SELECT * FROM user_objects WHERE object_type='TRIGGER';
You can also use this to query views, indexes etc etc
I checked the "Put NetBeans metadata in separate directory" tick and it works fine.
This is in 2. Name and Location after you choose PHP from existing source
Easier with inline coding
<button type="button" ng-click="showmore = (showmore !=null && showmore) ? false : true;" class="btn float-right" data-toggle="collapse" data-target="#moreoptions">
<span class="glyphicon" ng-class="showmore ? 'glyphicon-collapse-up': 'glyphicon-collapse-down'"></span>
{{ showmore !=null && showmore ? "Hide More Options" : "Show More Options" }}
</button>
<div id="moreoptions" class="collapse">Your Panel</div>
Ignacio Vazquez-Abrams is correct. But to elaborate, re.match()
will return either None
, which evaluates to False
, or a match object, which will always be True
as he said. Only if you want information about the part(s) that matched your regular expression do you need to check out the contents of the match object.
@paweloque For Comparing two Map Objects in java, you can add the keys of a map to list and with those 2 lists you can use the methods retainAll() and removeAll() and add them to another common keys list and different keys list. Using the keys of the common list and different list you can iterate through map, using equals you can compare the maps.
The below code will give output like this:
Before {zoo=barbar, foo=barbar}
After {zoo=barbar, foo=barbar}
Equal: Before- barbar After- barbar
Equal: Before- barbar After- barbar
package com.demo.compareExample
import java.util.ArrayList;
import java.util.HashMap;
import java.util.Iterator;
import java.util.List;
import java.util.Map;
import org.apache.commons.collections.CollectionUtils;
public class Demo
{
public static void main(String[] args)
{
Map<String, String> beforeMap = new HashMap<String, String>();
beforeMap.put("foo", "bar"+"bar");
beforeMap.put("zoo", "bar"+"bar");
Map<String, String> afterMap = new HashMap<String, String>();
afterMap.put(new String("foo"), "bar"+"bar");
afterMap.put(new String("zoo"), "bar"+"bar");
System.out.println("Before "+beforeMap);
System.out.println("After "+afterMap);
List<String> beforeList = getAllKeys(beforeMap);
List<String> afterList = getAllKeys(afterMap);
List<String> commonList1 = beforeList;
List<String> commonList2 = afterList;
List<String> diffList1 = getAllKeys(beforeMap);
List<String> diffList2 = getAllKeys(afterMap);
commonList1.retainAll(afterList);
commonList2.retainAll(beforeList);
diffList1.removeAll(commonList1);
diffList2.removeAll(commonList2);
if(commonList1!=null & commonList2!=null) // athough both the size are same
{
for (int i = 0; i < commonList1.size(); i++)
{
if ((beforeMap.get(commonList1.get(i))).equals(afterMap.get(commonList1.get(i))))
{
System.out.println("Equal: Before- "+ beforeMap.get(commonList1.get(i))+" After- "+afterMap.get(commonList1.get(i)));
}
else
{
System.out.println("Unequal: Before- "+ beforeMap.get(commonList1.get(i))+" After- "+afterMap.get(commonList1.get(i)));
}
}
}
if (CollectionUtils.isNotEmpty(diffList1))
{
for (int i = 0; i < diffList1.size(); i++)
{
System.out.println("Values present only in before map: "+beforeMap.get(diffList1.get(i)));
}
}
if (CollectionUtils.isNotEmpty(diffList2))
{
for (int i = 0; i < diffList2.size(); i++)
{
System.out.println("Values present only in after map: "+afterMap.get(diffList2.get(i)));
}
}
}
/**getAllKeys API adds the keys of the map to a list */
private static List<String> getAllKeys(Map<String, String> map1)
{
List<String> key = new ArrayList<String>();
if (map1 != null)
{
Iterator<String> mapIterator = map1.keySet().iterator();
while (mapIterator.hasNext())
{
key.add(mapIterator.next());
}
}
return key;
}
}
SDK.INT is supported for Android 1.6 and up
SDK is supported for all versions
So I do:
String sdk_version_number = android.os.Build.VERSION.SDK;
Credits to: CommonsWare over this answer
$a | sort -unique
This works with case-insensitive, therefore removing duplicates strings with differing cases. Solved my problem.
$ServerList = @(
"FS3",
"HQ2",
"hq2"
) | sort -Unique
$ServerList
The above outputs:
FS3
HQ2
Hi Actually this is my same question but I didn't get anything.Now I got mobile number and his email-Id from particular Android real device(Android Mobile).Now a days 90% people using what's App application on Android Mobile.And now I am getting Mobile no and email-ID Through this What's app API.Its very simple to use see this below code.
AccountManager am = AccountManager.get(this);
Account[] accounts = am.getAccounts();
for (Account ac : accounts)
{
acname = ac.name;
if (acname.startsWith("91")) {
mobile_no = acname;
}else if(acname.endsWith("@gmail.com")||acname.endsWith("@yahoo.com")||acname.endsWith("@hotmail.com")){
email = acname;
}
// Take your time to look at all available accounts
Log.i("Accounts : ", "Accounts : " + acname);
}
and import this API
import android.accounts.Account;
import android.accounts.AccountManager;
Select-String
worked best for me. All the other options listed here, such as findstr
, didn't work with large files.
Here's an example:
select-string -pattern "<pattern>" -path "<path>"
note: This requires Powershell
This worked for me. Its tedious to set all the colour options for a series, especially if it's dynamic
plotOptions: {
column: {
colorByPoint: true
}
}
As mentioned here: Re: BUG #4243: Idle in transaction it is probably best to check your pg_locks table to see what is being locked and that might give you a better clue where the problem lies.
To pull a copy of the branch and force overwrite of local files from the origin use:
git reset --hard origin/current_branch
All current work will be lost and it will then be the same as the origin branch
Usually there is an information about the problem in localhost.[date].log. But sometimes there is nothing in this log. This can happen if there is messed configuration of the project (several developers worked on it for a long time and each added something from himself). I faced this problem WITHOUT any information in log. Rather fast and robust approach:
Try to remove everything which can cause any problem from web.xml. You even can remove everything except tag. If application still cannot be deployed - go on.
Remove every *.xml descriptor from WEB-INF/classes. If application cannot be deployed - go on.
Remove all logging configuration you can find in your war (logging.properties, log4j.properties). Try to deploy. At this step I've got more informative error, but deployment still failed.
After googling for this error I found out that project included old version of xerces, which clashed with Tomcat's version (which was newer) and didn't the application to be deployed. After upgrade of xerces in web-application everything became fine.
You use pluginManagement
in a parent pom
to configure it in case any child pom
wants to use it, but not every child plugin wants to use it. An example can be that your super pom
defines some options for the maven Javadoc plugin.
Not each child pom
might want to use Javadoc, so you define those defaults in a pluginManagement
section. The child pom that wants to use the Javadoc plugin, just defines a plugin section and will inherit the configuration from the pluginManagement
definition in the parent pom
.
Double click and open the server. Go to 'Arguments'. -Dcatalina.base= .. something. Go to that something. Your logs are there.
I only write shell scripts now and then and fall out of practice, so any feedback is appreciated.
Using the strategy proposed by @Arvid Requate, we noticed some user errors. A user who forgets to include a value will accidentally have the next option's name treated as a value:
./getopts_test.sh --loglevel= --toc=TRUE
will cause the value of "loglevel" to be seen as "--toc=TRUE". This can be avoided.
I adapted some ideas about checking user error for CLI from http://mwiki.wooledge.org/BashFAQ/035 discussion of manual parsing. I inserted error checking into handling both "-" and "--" arguments.
Then I started fiddling around with the syntax, so any errors in here are strictly my fault, not the original authors.
My approach helps users who prefer to enter long with or without the equal sign. That is, it should have same response to "--loglevel 9" as "--loglevel=9". In the --/space method, it is not possible to know for sure if the user forgets an argument, so some guessing is needed.
In case you are starting out on this, there is an interesting difference between "--opt=value" and "--opt value" formats. With the equal sign, the command line argument is seen as "opt=value" and the work to handle that is string parsing, to separate at the "=". In contrast, with "--opt value", the name of the argument is "opt" and we have the challenge of getting the next value supplied in the command line. That's where @Arvid Requate used ${!OPTIND}, the indirect reference. I still don't understand that, well, at all, and comments in BashFAQ seem to warn against that style (http://mywiki.wooledge.org/BashFAQ/006). BTW, I don't think previous poster's comments about importance of OPTIND=$(( $OPTIND + 1 )) are correct. I mean to say, I see no harm from omitting it.
In newest version of this script, flag -v means VERBOSE printout.
Save it in a file called "cli-5.sh", make executable, and any of these will work, or fail in the desired way
./cli-5.sh -v --loglevel=44 --toc TRUE
./cli-5.sh -v --loglevel=44 --toc=TRUE
./cli-5.sh --loglevel 7
./cli-5.sh --loglevel=8
./cli-5.sh -l9
./cli-5.sh --toc FALSE --loglevel=77
./cli-5.sh --toc=FALSE --loglevel=77
./cli-5.sh -l99 -t yyy
./cli-5.sh -l 99 -t yyy
Here is example output of the error-checking on user intpu
$ ./cli-5.sh --toc --loglevel=77
ERROR: toc value must not have dash at beginning
$ ./cli-5.sh --toc= --loglevel=77
ERROR: value for toc undefined
You should consider turning on -v, because it prints out internals of OPTIND and OPTARG
#/usr/bin/env bash
## Paul Johnson
## 20171016
##
## Combines ideas from
## https://stackoverflow.com/questions/402377/using-getopts-in-bash-shell-script-to-get-long-and-short-command-line-options
## by @Arvid Requate, and http://mwiki.wooledge.org/BashFAQ/035
# What I don't understand yet:
# In @Arvid REquate's answer, we have
# val="${!OPTIND}"; OPTIND=$(( $OPTIND + 1 ))
# this works, but I don't understand it!
die() {
printf '%s\n' "$1" >&2
exit 1
}
printparse(){
if [ ${VERBOSE} -gt 0 ]; then
printf 'Parse: %s%s%s\n' "$1" "$2" "$3" >&2;
fi
}
showme(){
if [ ${VERBOSE} -gt 0 ]; then
printf 'VERBOSE: %s\n' "$1" >&2;
fi
}
VERBOSE=0
loglevel=0
toc="TRUE"
optspec=":vhl:t:-:"
while getopts "$optspec" OPTCHAR; do
showme "OPTARG: ${OPTARG[*]}"
showme "OPTIND: ${OPTIND[*]}"
case "${OPTCHAR}" in
-)
case "${OPTARG}" in
loglevel) #argument has no equal sign
opt=${OPTARG}
val="${!OPTIND}"
## check value. If negative, assume user forgot value
showme "OPTIND is {$OPTIND} {!OPTIND} has value \"${!OPTIND}\""
if [[ "$val" == -* ]]; then
die "ERROR: $opt value must not have dash at beginning"
fi
## OPTIND=$(( $OPTIND + 1 )) # CAUTION! no effect?
printparse "--${OPTARG}" " " "${val}"
loglevel="${val}"
shift
;;
loglevel=*) #argument has equal sign
opt=${OPTARG%=*}
val=${OPTARG#*=}
if [ "${OPTARG#*=}" ]; then
printparse "--${opt}" "=" "${val}"
loglevel="${val}"
## shift CAUTION don't shift this, fails othewise
else
die "ERROR: $opt value must be supplied"
fi
;;
toc) #argument has no equal sign
opt=${OPTARG}
val="${!OPTIND}"
## check value. If negative, assume user forgot value
showme "OPTIND is {$OPTIND} {!OPTIND} has value \"${!OPTIND}\""
if [[ "$val" == -* ]]; then
die "ERROR: $opt value must not have dash at beginning"
fi
## OPTIND=$(( $OPTIND + 1 )) #??
printparse "--${opt}" " " "${val}"
toc="${val}"
shift
;;
toc=*) #argument has equal sign
opt=${OPTARG%=*}
val=${OPTARG#*=}
if [ "${OPTARG#*=}" ]; then
toc=${val}
printparse "--$opt" " -> " "$toc"
##shift ## NO! dont shift this
else
die "ERROR: value for $opt undefined"
fi
;;
help)
echo "usage: $0 [-v] [--loglevel[=]<value>] [--toc[=]<TRUE,FALSE>]" >&2
exit 2
;;
*)
if [ "$OPTERR" = 1 ] && [ "${optspec:0:1}" != ":" ]; then
echo "Unknown option --${OPTARG}" >&2
fi
;;
esac;;
h|-\?|--help)
## must rewrite this for all of the arguments
echo "usage: $0 [-v] [--loglevel[=]<value>] [--toc[=]<TRUE,FALSE>]" >&2
exit 2
;;
l)
loglevel=${OPTARG}
printparse "-l" " " "${loglevel}"
;;
t)
toc=${OPTARG}
;;
v)
VERBOSE=1
;;
*)
if [ "$OPTERR" != 1 ] || [ "${optspec:0:1}" = ":" ]; then
echo "Non-option argument: '-${OPTARG}'" >&2
fi
;;
esac
done
echo "
After Parsing values
"
echo "loglevel $loglevel"
echo "toc $toc"
Solution #1
Since the original question only wants a simplified solution (and not a faster one), here is a one-line solution:
public boolean contains(int[] array, int key) {
return Arrays.toString(array).matches(".*[\\[ ]" + key + "[\\],].*");
}
Explanation: Javadoc of Arrays.toString()
states the result is enclosed in square brackets and adjacent elements are separated by the characters ", " (a comma followed by a space). So we can count on this. First we convert array
to a string, and then we check if key
is contained in this string. Of course we cannot accept "sub-numbers" (e.g. "1234" contains "23"), so we have to look for patterns where the key
is preceded with an opening bracket or a space, and followed by a closing bracket or a comma.
Note: The used regexp pattern also handles negative numbers properly (whose string representation starts with a minus sign).
Solution #2
This solution is already posted but it contains mistakes, so I post the correct solution:
public boolean contains(int[] array, int key) {
Arrays.sort(array);
return Arrays.binarySearch(array, key) >= 0;
}
Also this solution has a side effect: it modifies the array
(sorts it).
The rgba() function can accept a single hex color as well decimal RGB values. For example, this would work just fine:
@mixin background-opacity($color, $opacity: 0.3) {
background: $color; /* The Fallback */
background: rgba($color, $opacity);
}
element {
@include background-opacity(#333, 0.5);
}
If you ever need to break the hex color into RGB components, though, you can use the red(), green(), and blue() functions to do so:
$red: red($color);
$green: green($color);
$blue: blue($color);
background: rgb($red, $green, $blue); /* same as using "background: $color" */
In short, no, you can't.
Long answer, extension methods are just syntactic sugar. IE:
If you have an extension method on string let's say:
public static string SomeStringExtension(this string s)
{
//whatever..
}
When you then call it:
myString.SomeStringExtension();
The compiler just turns it into:
ExtensionClass.SomeStringExtension(myString);
So as you can see, there's no way to do that for static methods.
And another thing just dawned on me: what would really be the point of being able to add static methods on existing classes? You can just have your own helper class that does the same thing, so what's really the benefit in being able to do:
Bool.Parse(..)
vs.
Helper.ParseBool(..);
Doesn't really bring much to the table...
A context manager for python3:
import sys
from io import StringIO
class RedirectedStdout:
def __init__(self):
self._stdout = None
self._string_io = None
def __enter__(self):
self._stdout = sys.stdout
sys.stdout = self._string_io = StringIO()
return self
def __exit__(self, type, value, traceback):
sys.stdout = self._stdout
def __str__(self):
return self._string_io.getvalue()
use like this:
>>> with RedirectedStdout() as out:
>>> print('asdf')
>>> s = str(out)
>>> print('bsdf')
>>> print(s, out)
'asdf\n' 'asdf\nbsdf\n'
You can iterate over the row data
$('#button').click(function () {
var ids = $.map(table.rows('.selected').data(), function (item) {
return item[0]
});
console.log(ids)
alert(table.rows('.selected').data().length + ' row(s) selected');
});
Demo: Fiddle
Cstr()
is compiled inline for better performance.
CType
allows for casts between types if a conversion operator is defined
ToString()
Between base type and string throws an exception if conversion is not possible.
TryParse()
From String to base typeif
possible otherwise returns false
DirectCast
used if the types are related via inheritance or share a common interface , will throw an exception if the cast is not possible, trycast
will return nothing in this instance
Use the following setting and you will be all set. Go to Window --> Preference --> General --> Network Connection --> select Direct from drop down
Yes, template member functions are perfectly legal and useful on numerous occasions.
The only caveat is that template member functions cannot be virtual.
I was able to add an app icon to my react-native android project by following this guy's advice and using Android Asset Studio
Here it is, transcribed in case the link goes dead:
How to upload an Application Icon in React-Native Android
1) Upload your image to Android Asset Studio. Pick whatever effects you’d like to apply. The tool generates a zip file for you. Click Download .Zip.
2) Unzip the file on your machine. Then drag over the images you want to your /android/app/src/main/res/
folder. Make sure to put each image in the right subfolder mipmap-{hdpi, mdpi, xhdpi, xxhdpi, xxxhdpi}.
3) Do not (as I originally did) naively drag and drop the whole folder over your res folder. As you may be removing your /res/values/{strings,styles}.xml
files altogether.
I know this is old but how about this:
Build a timer to fire at startup that calculates time to next run time. At the first call of the runtime, cancel the first timer and start a new daily timer. change daily to hourly or whatever you want the periodicity to be.
You have to forgo the regex literal and use the object constructor, where you can pass the regex as a string.
var regex = new RegExp(pattern1+'|'+pattern2, 'gi');
str.match(regex);
_trace its directory, I guess
echo css('lib/datatables_rqs/jquery.dataTables.css');
I tried all these answers, even closed Visual Studio and deleted all bin directories.
After starting it up again the MVC reference appeared to have a yellow exclamation mark on it, so I removed it and added it again.
Now it works, without copy local.
I would like to give an example which I tried by understanding above documentation and works correctly. If you wish to apply 25% padding on left and right sides medium screen size then please use px-md-1. It works as desired and can similarly follow for other screen sizes. :)
I had the same problem. No one gave me this solution, but it worked for me.
I solved it by:
.git
directory.git reset --hard HEAD
git pull
git push
Now it works.
Giddyup are language-agnostic just-add-water git hooks to automate deployment via git push. It also allows you to have custom start/stop hooks for restarting web server, warming up cache etc.
https://github.com/mpalmer/giddyup
Check out examples.
For Windows/WSL/Cygwin etc users:
Make sure that your line endings are standard Unix line feeds, i.e. \n
(LF) only.
Using Windows line endings \r\n
(CRLF) line endings will break the command line break.
This is because having \
at the end of a line with Windows line ending translates to
\
\r
\n
.
As Mark correctly explains above:
The line-continuation will fail if you have whitespace after the backslash and before the newline.
This includes not just space () or tabs (
\t
) but also the carriage return (\r
).
If you have your tomcat started (in linux check with ps -ef | grep java
) and you see it opened the port 8080 or the one you configured in server.xml (check with netstat --tcp -na | grep <port number>
) but you still cannot access it in your browser check the following:
logs/catalina.out
. You should see something like this when the server started completely.
INFO [main] org.apache.catalina.startup.Catalina.start Server startup in 38442 ms
SecureRandom
class responsible to provide random Session IDs and which can cause big delays during startup.
Check more details and the solution here.iptables -L -n
): You can try to reset your firewall completely iptables -F
if you are not into an exposed environment. However, pay attention, that leaves you without protection therefore it can be dangerous.selinux
(if you are on linux).These are some of the most forgotten and not obvious issues in having your Apache Tomcat up and running.
PhantomJS is on npm. You can run this command to install it globally:
npm install -g phantomjs-prebuilt
phantomjs -v
should return 2.1.1
You can launch the correct version of Spyder by launching from Ananconda's Navigator. From the dropdown, switch to your desired environment and then press the launch Spyder button. You should be able to check the results right away.
We use a combination of the processor id number (ProcessorID
) from Win32_processor
and the universally unique identifier (UUID
) from Win32_ComputerSystemProduct
:
ManagementObjectCollection mbsList = null;
ManagementObjectSearcher mos = new ManagementObjectSearcher("Select ProcessorID From Win32_processor");
mbsList = mos.Get();
string processorId = string.Empty;
foreach (ManagementBaseObject mo in mbsList)
{
processorId = mo["ProcessorID"] as string;
}
mos = new ManagementObjectSearcher("SELECT UUID FROM Win32_ComputerSystemProduct");
mbsList = mos.Get();
string systemId = string.Empty;
foreach (ManagementBaseObject mo in mbsList)
{
systemId = mo["UUID"] as string;
}
var compIdStr = $"{processorId}{systemId}";
Previously, we used a combination: processor ID ("Select ProcessorID From Win32_processor"
) and the motherboard serial number ("SELECT SerialNumber FROM Win32_BaseBoard"
), but then we found out that the serial number of the motherboard may not be filled in, or it may be filled in with uniform values:
Therefore, it is worth considering this situation.
Also keep in mind that the ProcessorID
number may be the same on different computers.
Add this code
dialog.getWindow().setBackgroundDrawable(new ColorDrawable(android.graphics.Color.TRANSPARENT));
Or this one instead:
dialog.getWindow().setBackgroundDrawableResource(android.R.color.transparent);
you should use the break statement
usually it's use this way
$i = 0;
foreach($data as $key => $row){
if(++$i > 2) break;
}
on the same fashion the continue statement exists if you need to skip some items.
I know this is an old question however I've found a much neater way of doing this conversion.
Java
TypedValue.applyDimension(TypedValue.COMPLEX_UNIT_DIP, 65, getResources().getDisplayMetrics());
Kotlin
TypedValue.applyDimension(TypedValue.COMPLEX_UNIT_DIP, 65f, resources.displayMetrics)
In Xcode 11
, you can provide only one image with 1x, 2x, and 3x scales then set it in LaunchScreen.storyboard
to fill up the screen and everything goes well!
For Example: (1242pt x 2688pt @1x)
This is the portrait screen size of iPhone 11 Pro Max
which is the large iPhone screen size yet so it will give you high-quality splash screen on all iOS devices.
I have collected all sizes needed for the splash screen. All u need is to just drag images with these sizes and drop them, Xcode will place each size in the right place.
Good luck.
320×480
640×960
640×1136
750×1334
768×1004
768×1024
828×1792
1024×748
1024×768
1125×2436
1242×2208
1242×2688
1536×2008
1536×2048
1792×828
2048×1496
2048×1536
2208×1242
2436×1125
2688×1242
Note
Count of required images are 26 images but there are 6 duplicated sizes so u will find the above sizes are only 20.
My 2 cent. Same but different...
<script>
dosomething("blaha", function(){
alert("Yay just like jQuery callbacks!");
});
function dosomething(damsg, callback){
alert(damsg);
if(typeof callback == "function")
callback();
}
</script>
For ansible, and using hyphen, this worked for me:
- name: free-ud-ssd-space-in-percent
debug:
var: clusterInfo.json.content["free-ud-ssd-space-in-percent"]
I think mattingly890 has the correct answer , here is another example along with the pattern/commmand
db.collection.find( {}, {your_key:1, _id:0})
SELECT a.file_name,
substr(A.tablespace_name,1,14) tablespace_name,
trunc(decode(A.autoextensible,'YES',A.MAXSIZE-A.bytes+b.free,'NO',b.free)/1024/1024) free_mb,
trunc(a.bytes/1024/1024) allocated_mb,
trunc(A.MAXSIZE/1024/1024) capacity,
a.autoextensible ae
FROM (
SELECT file_id, file_name,
tablespace_name,
autoextensible,
bytes,
decode(autoextensible,'YES',maxbytes,bytes) maxsize
FROM dba_data_files
GROUP BY file_id, file_name,
tablespace_name,
autoextensible,
bytes,
decode(autoextensible,'YES',maxbytes,bytes)
) a,
(SELECT file_id,
tablespace_name,
sum(bytes) free
FROM dba_free_space
GROUP BY file_id,
tablespace_name
) b
WHERE a.file_id=b.file_id(+)
AND A.tablespace_name=b.tablespace_name(+)
ORDER BY A.tablespace_name ASC;
I personally prefer automatic submit after end of typing. Here's how you can detect this event.
Declarations and initialization:
private Timer timer = new Timer();
private final long DELAY = 1000; // in ms
Listener in e.g. onCreate()
EditText editTextStop = (EditText) findViewById(R.id.editTextStopId);
editTextStop.addTextChangedListener(new TextWatcher() {
@Override
public void beforeTextChanged(CharSequence s, int start, int count,
int after) {
}
@Override
public void onTextChanged(final CharSequence s, int start, int before,
int count) {
if(timer != null)
timer.cancel();
}
@Override
public void afterTextChanged(final Editable s) {
//avoid triggering event when text is too short
if (s.length() >= 3) {
timer = new Timer();
timer.schedule(new TimerTask() {
@Override
public void run() {
// TODO: do what you need here (refresh list)
// you will probably need to use
// runOnUiThread(Runnable action) for some specific
// actions
serviceConnector.getStopPoints(s.toString());
}
}, DELAY);
}
}
});
So, when text is changed the timer is starting to wait for any next changes to happen. When they occure timer is cancelled and then started once again.
Here's an updated answer for Angular 4 & 5. TransformRequest and angular.identity were dropped. I've also included the ability to combine files with JSON data in one request.
Angular 5 Solution:
import {HttpClient} from '@angular/common/http';
uploadFileToUrl(files, restObj, uploadUrl): Promise<any> {
// Note that setting a content-type header
// for mutlipart forms breaks some built in
// request parsers like multer in express.
const options = {} as any; // Set any options you like
const formData = new FormData();
// Append files to the virtual form.
for (const file of files) {
formData.append(file.name, file)
}
// Optional, append other kev:val rest data to the form.
Object.keys(restObj).forEach(key => {
formData.append(key, restObj[key]);
});
// Send it.
return this.httpClient.post(uploadUrl, formData, options)
.toPromise()
.catch((e) => {
// handle me
});
}
Angular 4 Solution:
// Note that these imports below are deprecated in Angular 5
import {Http, RequestOptions} from '@angular/http';
uploadFileToUrl(files, restObj, uploadUrl): Promise<any> {
// Note that setting a content-type header
// for mutlipart forms breaks some built in
// request parsers like multer in express.
const options = new RequestOptions();
const formData = new FormData();
// Append files to the virtual form.
for (const file of files) {
formData.append(file.name, file)
}
// Optional, append other kev:val rest data to the form.
Object.keys(restObj).forEach(key => {
formData.append(key, restObj[key]);
});
// Send it.
return this.http.post(uploadUrl, formData, options)
.toPromise()
.catch((e) => {
// handle me
});
}
The simpliest way
Scanner in = new Scanner(System.in);
System.out.println("Enter seconds");
int s = in.nextInt();
int sec = s % 60;
int min = (s / 60)%60;
int hours = (s/60)/60;
System.out.println(hours + ":" + min + ":" + sec);
I used Calumah's function posted above, but I did run into an issue with his code as poisted.
The rows are joined with a semicolon
csv.push(row.join(';'));
but the link generated has "text/csv" as the content type
Maybe in Windows that isn't a problem, but in Excel for Mac that throws things off. I changed the array join to a comma and it worked perfect.
My observations based on a few tests has been that whichever name differs from the property name is one which takes effect:
For eg. consider a slight modification of your case:
@JsonProperty("fileName")
private String fileName;
@JsonProperty("fileName")
public String getFileName()
{
return fileName;
}
@JsonProperty("fileName1")
public void setFileName(String fileName)
{
this.fileName = fileName;
}
Both fileName
field, and method getFileName
, have the correct property name of fileName
and setFileName
has a different one fileName1
, in this case Jackson will look for a fileName1
attribute in json at the point of deserialization and will create a attribute called fileName1
at the point of serialization.
Now, coming to your case, where all the three @JsonProperty differ from the default propertyname of fileName
, it would just pick one of them as the attribute(FILENAME
), and had any on of the three differed, it would have thrown an exception:
java.lang.IllegalStateException: Conflicting property name definitions
Have you tried this ?
watch: {
myProp: {
// the callback will be called immediately after the start of the observation
immediate: true,
handler (val, oldVal) {
// do your stuff
}
}
}
Referencing Qwerty's answer, if the destRow isnot null, sheet.shiftRows() will change the destRow's reference to the next row; so we should always create a new row:
if (destRow != null) {
sheet.shiftRows(destination, sheet.getLastRowNum(), 1);
}
destRow = sheet.createRow(destination);
You can also use sqlalchemy builtin function for default DateTime
from sqlalchemy.sql import func
DT = Column(DateTime(timezone=True), default=func.now())
Use .astype
.
>>> a = numpy.array([1, 2, 3, 4], dtype=numpy.float64)
>>> a
array([ 1., 2., 3., 4.])
>>> a.astype(numpy.int64)
array([1, 2, 3, 4])
See the documentation for more options.
Even though the above answer appears to be correct, I wanted to add a (hopefully) more readable example that also stays in 3 columns form at different widths:
.flex-row-container {_x000D_
background: #aaa;_x000D_
display: flex;_x000D_
flex-wrap: wrap;_x000D_
align-items: center;_x000D_
justify-content: center;_x000D_
}_x000D_
.flex-row-container > .flex-row-item {_x000D_
flex: 1 1 30%; /*grow | shrink | basis */_x000D_
height: 100px;_x000D_
}_x000D_
_x000D_
.flex-row-item {_x000D_
background-color: #fff4e6;_x000D_
border: 1px solid #f76707;_x000D_
}
_x000D_
<div class="flex-row-container">_x000D_
<div class="flex-row-item">1</div>_x000D_
<div class="flex-row-item">2</div>_x000D_
<div class="flex-row-item">3</div>_x000D_
<div class="flex-row-item">4</div>_x000D_
<div class="flex-row-item">5</div>_x000D_
<div class="flex-row-item">6</div>_x000D_
</div>
_x000D_
Hope this helps someone else.
The stl contains a bunch of methods that should be used dependent to the problem.
std::find
std::find_if
std::count
std::find
std::binary_search
std::equal_range
std::lower_bound
std::upper_bound
Now it contains on your data what algorithm to use. This Artikel contains a perfect table to help choosing the right algorithm.
In the special case where min max should be determined and you are using std::vector or ???* array
std::min_element
std::max_element
can be used.
In my case, I have to get 2 values what are objects. I share this simple solution.
$ran = array("a","b","c","d");
$ranval = array_map(function($i) use($ran){return $ran[$i];},array_rand($ran,2));
You can/should set your parameter to value to DBNull.Value;
if (variable == "")
{
cmd.Parameters.Add("@Param", SqlDbType.VarChar, 500).Value = DBNull.Value;
}
else
{
cmd.Parameters.Add("@Param", SqlDbType.VarChar, 500).Value = variable;
}
Or you can leave your server side set to null and not pass the param at all.
Usually I would say it is overkill, but there are occasionally reasons for writing unit tests for enums.
Sometimes the values assigned to enumeration members must never change or the loading of legacy persisted data will fail. Similarly, apparently unused members must not be deleted. Unit tests can be used to guard against a developer making changes without realising the implications.
I'm afraid the DateTimePicker control doesn't have the ability to do those things. It's a pretty basic (and frustrating!) control. Your best option may be to find a third-party control that does what you want.
For the option of typing the date and time manually, you could build a custom component with a TextBox/DateTimePicker combination to accomplish this, and it might work reasonably well, if third-party controls are not an option.
I'm not sure if this helps, but I needed to create a macro to hold a snippet, so I simply recorded myself inserting the items and set a shortcut to it. Granted, I'm not using version 5.9 so there might be some slight version differences. To access the macro recorder go to Macro > Start Recording. Then you will perform your action and then go to Macro > Stop Recording. I'd recommend playing it back to ensure it's correct and then save and set your shortcut key.
Hope the helps.
I couldn't get this working. Started with PHP 5.3
, then tried to switch to PHP 5.28
from xampp-win32-1.7.0.zip
. Couldn't get it to work. Then, I got smart and figured out i was working with XAMPP and you can install it wherever you want, so I did a fresh install from scratch with xampp-win32-1.7.0.zip
. The whole point of working with XAMPP is so you don't have to fuss with the sysadmin stuff. Using it in that context got me up and running in no time.
If you run binary on linux machine you could use shell script.
overwrite into a file
./binaryapp > binaryapp.log
append into a file
./binaryapp >> binaryapp.log
overwrite stderr into a file
./binaryapp &> binaryapp.error.log
append stderr into a file
./binaryapp &>> binalyapp.error.log
it can be more dynamic using shell script file.
.getBoundingClientRect() returns the size of an element and its position relative to the viewport.We can easily get following
Example :
var element = d3.select('.elementClassName').node();
element.getBoundingClientRect().width;
I used to try this method
_.filter(data, function(d) { return d.name != 'a' });
There might be better methods too like the above solutions provided by users
Everything is possible only if there is enough time to research :)
What I got to do is like having people that I iterate into a ui:repeat and display names and other fields in inputs. But one of fields was singleSelect - A and depending on it value update another input - B. even ui:repeat do not have id I put and it appeared in the DOM tree
<ui:repeat id="peopleRepeat"
value="#{myBean.people}"
var="person" varStatus="status">
Than the ids in the html were something like:
myForm:peopleRepeat:0:personType
myForm:peopleRepeat:1:personType
Than in the view I got one method like:
<p:ajax event="change"
listener="#{myBean.onPersonTypeChange(person, status.index)}"/>
And its implementation was in the bean like:
String componentId = "myForm:peopleRepeat" + idx + "personType";
PrimeFaces.current().ajax().update(componentId);
So this way I updated the element from the bean with no issues. PF version 6.2
Good luck and happy coding :)
For my responsive design, my drop-box down-arrow on the right side of the box (vertical accordion), accepted percentage as position. Initially the down-arrow was "position: absolute; right: 13px;". With the 97% positioning it worked like charm as follows:
> background: #ffffff;
> background-image: url(PATH-TO-arrow_down.png); /*fall back - IE */
> background-position: 97% center; /*fall back - IE */
> background-repeat: no-repeat; /*fall back - IE */
> background-image: url(PATH-TO-arrow_down.png) no-repeat 97% center;
> background: url(PATH-TO-arrow_down.png) no-repeat 97% center, -moz-linear-gradient(top, #ffffff 1%, #eaeaea 100%);
> background: url(PATH-TO-arrow_down.png) no-repeat 97% center, -webkit-gradient(linear, left top, left bottom, color-stop(1%,#ffffff), color-stop(100%,#eaeaea));
> background: url(PATH-TO-arrow_down.png) no-repeat 97% center, -webkit-linear-gradient(top, #ffffff 1%,#eaeaea 100%);
> background: url(PATH-TO-arrow_down.png) no-repeat 97% center, -o-linear-gradient(top, #ffffff 1%,#eaeaea 100%);<br />
> filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#ffffff', endColorstr='#eaeaea',GradientType=0 );
P.S. Sorry, don't know how to handle the filters.
Please find below the code that generates automatically the content of the txt local file and display it html. Good luck!
<html>
<head>
<meta charset="utf-8">
<script type="text/javascript">
var x;
if(navigator.appName.search('Microsoft')>-1) { x = new ActiveXObject('MSXML2.XMLHTTP'); }
else { x = new XMLHttpRequest(); }
function getdata() {
x.open('get', 'data1.txt', true);
x.onreadystatechange= showdata;
x.send(null);
}
function showdata() {
if(x.readyState==4) {
var el = document.getElementById('content');
el.innerHTML = x.responseText;
}
}
</script>
</head>
<body onload="getdata();showdata();">
<div id="content"></div>
</body>
</html>
(Get-ItemProperty -Path "HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion" -Name BuildLabEx).BuildLabEx
TEXT
c
bytes of disk space, where c
is the length of the stored string.VARCHAR(M)
M
charactersM
needs to be between 1 and 65535c
bytes (for M
≤ 255) or 2 + c
(for 256 ≤ M
≤ 65535) bytes of disk space where c
is the length of the stored stringTEXT
has a fixed max size of 2¹6-1 = 65535
characters.
VARCHAR
has a variable max size M
up to M = 2¹6-1
.
So you cannot choose the size of TEXT
but you can for a VARCHAR
.
The other difference is, that you cannot put an index (except for a fulltext index) on a TEXT
column.
So if you want to have an index on the column, you have to use VARCHAR
. But notice that the length of an index is also limited, so if your VARCHAR
column is too long you have to use only the first few characters of the VARCHAR
column in your index (See the documentation for CREATE INDEX
).
But you also want to use VARCHAR
, if you know that the maximum length of the possible input string is only M
, e.g. a phone number or a name or something like this. Then you can use VARCHAR(30)
instead of TINYTEXT
or TEXT
and if someone tries to save the text of all three "Lord of the Ring" books in your phone number column you only store the first 30 characters :)
Edit: If the text you want to store in the database is longer than 65535 characters, you have to choose MEDIUMTEXT
or LONGTEXT
, but be careful: MEDIUMTEXT
stores strings up to 16 MB, LONGTEXT
up to 4 GB. If you use LONGTEXT
and get the data via PHP (at least if you use mysqli
without store_result
), you maybe get a memory allocation error, because PHP tries to allocate 4 GB of memory to be sure the whole string can be buffered. This maybe also happens in other languages than PHP.
However, you should always check the input (Is it too long? Does it contain strange code?) before storing it in the database.
Notice: For both types, the required disk space depends only on the length of the stored string and not on the maximum length.
E.g. if you use the charset latin1 and store the text "Test" in VARCHAR(30)
, VARCHAR(100)
and TINYTEXT
, it always requires 5 bytes (1 byte to store the length of the string and 1 byte for each character). If you store the same text in a VARCHAR(2000)
or a TEXT
column, it would also require the same space, but, in this case, it would be 6 bytes (2 bytes to store the string length and 1 byte for each character).
For more information have a look at the documentation.
Finally, I want to add a notice, that both, TEXT
and VARCHAR
are variable length data types, and so they most likely minimize the space you need to store the data. But this comes with a trade-off for performance. If you need better performance, you have to use a fixed length type like CHAR
. You can read more about this here.
Use PHP's native json_encode
, like this:
<?php
$arr = array(
array(
"region" => "valore",
"price" => "valore2"
),
array(
"region" => "valore",
"price" => "valore2"
),
array(
"region" => "valore",
"price" => "valore2"
)
);
echo json_encode($arr);
?>
Update: To answer your question in the comment. You do it like this:
$named_array = array(
"nome_array" => array(
array(
"foo" => "bar"
),
array(
"foo" => "baz"
)
)
);
echo json_encode($named_array);
Since there is only one WiFi hardware on the computer its not possible to connect one WiFi hardware to multiple WiFi networks, if you want to that I think you have to map WiFi hardware to guest OS and how host you'll have to use some other hardware (may be Ethernet) but I'm sure that it will work in that way as no VM software allow us to allocate Hardware to Guest except for USB, you can also get USB WiFI and allocate that to VM only.
If you are using AndroidX you can use a custom SummaryProvider
. This approach can be used for any Preference
.
Example from documentation (Java):
EditTextPreference countingPreference = (EditTextPreference) findPreference("counting");
countingPreference.setSummaryProvider(new SummaryProvider<EditTextPreference>() {
@Override
public CharSequence provideSummary(EditTextPreference preference) {
String text = preference.getText();
if (TextUtils.isEmpty(text)){
return "Not set";
}
return "Length of saved value: " + text.length();
}
});
Example from documentation (Kotlin):
val countingPreference = findPreference("counting") as EditTextPreference
countingPreference.summaryProvider = SummaryProvider<EditTextPreference> { preference ->
val text = preference.text
if (TextUtils.isEmpty(text)) {
"Not set"
} else {
"Length of saved value: " + text.length
}
}
Mac version: $ ld -v 2, don't know how to get detailed paths. output
Library search paths:
/usr/lib
/usr/local/lib
Framework search paths:
/Library/Frameworks/
/System/Library/Frameworks/
You can use the following command:
git checkout HEAD -- my-file.txt
... which will update both the working copy of my-file.txt
and its state in the index with that from HEAD.
--
basically means: treat every argument after this point as a file name. More details in this answer. Thanks to VonC for pointing this out.
Yes, there are tons of software available to decompile a .apk file.
Recently, I had compiled an ultimate list of 47 best APK decompilers on my website. I arranged them into 4 different sections.
I hope this collection will be helpful to you.
Use itertools.chain:
itertools.chain(*iterables)
:Make an iterator that returns elements from the first iterable until it is exhausted, then proceeds to the next iterable, until all of the iterables are exhausted. Used for treating consecutive sequences as a single sequence.
from itertools import chain
A = [[1,2], [3,4]]
print list(chain(*A))
# or better: (available since Python 2.6)
print list(chain.from_iterable(A))
The output is:
[1, 2, 3, 4]
[1, 2, 3, 4]
A variable is just a label pointing to an object. The object is immutable, but you can make the label point to a completely different object if you want to.
I know this is really old, but this is the simplest way to query for Map.
Simply implement the ResultSetExtractor interface to define what type you want to return. Below is an example of how to use this. You'll be mapping it manually, but for a simple map, it should be straightforward.
jdbcTemplate.query("select string1,string2 from table where x=1", new ResultSetExtractor<Map>(){
@Override
public Map extractData(ResultSet rs) throws SQLException,DataAccessException {
HashMap<String,String> mapRet= new HashMap<String,String>();
while(rs.next()){
mapRet.put(rs.getString("string1"),rs.getString("string2"));
}
return mapRet;
}
});
This will give you a return type of Map that has multiple rows (however many your query returned) and not a list of Maps. You can view the ResultSetExtractor docs here: http://docs.spring.io/spring-framework/docs/2.5.6/api/org/springframework/jdbc/core/ResultSetExtractor.html
There are two ways to access properties of objects:
var obj = {a: 'foo', b: 'bar'};
obj.a //foo
obj['b'] //bar
Or, if you need to dynamically do it:
var key = 'b';
obj[key] //bar
If you don't already have it as an object, you'll need to convert it.
For a more complex example, let's assume you have an array of objects that represent users:
var users = [{name: 'Corbin', age: 20, favoriteFoods: ['ice cream', 'pizza']},
{name: 'John', age: 25, favoriteFoods: ['ice cream', 'skittle']}];
To access the age property of the second user, you would use users[1].age
. To access the second "favoriteFood" of the first user, you'd use users[0].favoriteFoods[2]
.
Another example: obj[2].key[3]["some key"]
That would access the 3rd element of an array named 2. Then, it would access 'key' in that array, go to the third element of that, and then access the property name some key
.
As Amadan noted, it might be worth also discussing how to loop over different structures.
To loop over an array, you can use a simple for loop:
var arr = ['a', 'b', 'c'],
i;
for (i = 0; i < arr.length; ++i) {
console.log(arr[i]);
}
To loop over an object is a bit more complicated. In the case that you're absolutely positive that the object is a plain object, you can use a plain for (x in obj) { }
loop, but it's a lot safer to add in a hasOwnProperty check. This is necessary in situations where you cannot verify that the object does not have inherited properties. (It also future proofs the code a bit.)
var user = {name: 'Corbin', age: 20, location: 'USA'},
key;
for (key in user) {
if (user.hasOwnProperty(key)) {
console.log(key + " = " + user[key]);
}
}
(Note that I've assumed whatever JS implementation you're using has console.log
. If not, you could use alert
or some kind of DOM manipulation instead.)
If you simply wants to change the class name so it will rendered differently, below code would do the trick.
<div>
<div ng-show="loginsuccess" ng-repeat="i in itemList">
<div id="{{i.status}}" class="{{i.status}}">
<div class="listitems">{{i.item}}</div>
<div class="listitems">{{i.qty}}</div>
<div class="listitems">{{i.date}}</div>
<div class="listbutton">
<button ng-click="UpdateStatus(i.$id)" class="btn"><span>Done</span></button>
<button ng-click="changeClass()" class="btn"><span>Remove</span></button>
</div>
<hr>
</div>
This code worked for me when I had a similar requirement to render the shopped item in my shopping list in Strick trough font.
I wrote a class to normalize the data in my dictionary. The 'element' in the NormalizeData class below, needs to be of dict type. And you need to replace in the __iterate() with either your custom class object or any other object type that you would like to normalize.
class NormalizeData:
def __init__(self, element):
self.element = element
def execute(self):
if isinstance(self.element, dict):
self.__iterate()
else:
return
def __iterate(self):
for key in self.element:
if isinstance(self.element[key], <ClassName>):
self.element[key] = str(self.element[key])
node = NormalizeData(self.element[key])
node.execute()
You are pretty confused my friend. There are no LOOPS in SQL, only in PL/SQL. Here's a few examples based on existing Oracle table - copy/paste to see results:
-- Numeric FOR loop --
set serveroutput on -->> do not use in TOAD --
DECLARE
k NUMBER:= 0;
BEGIN
FOR i IN 1..10 LOOP
k:= k+1;
dbms_output.put_line(i||' '||k);
END LOOP;
END;
/
-- Cursor FOR loop --
set serveroutput on
DECLARE
CURSOR c1 IS SELECT * FROM scott.emp;
i NUMBER:= 0;
BEGIN
FOR e_rec IN c1 LOOP
i:= i+1;
dbms_output.put_line(i||chr(9)||e_rec.empno||chr(9)||e_rec.ename);
END LOOP;
END;
/
-- SQL example to generate 10 rows --
SELECT 1 + LEVEL-1 idx
FROM dual
CONNECT BY LEVEL <= 10
/
I ran into the same error message while using the ChargifyNET.dll to communicate with the Chargify API. Adding chargify.ProtocolType = SecurityProtocolType.Tls12;
to the configuration solved the problem for me.
Here is the complete code snippet:
public ChargifyConnect GetChargifyConnect()
{
var chargify = new ChargifyConnect();
chargify.apiKey = ConfigurationManager.AppSettings["Chargify.apiKey"];
chargify.Password = ConfigurationManager.AppSettings["Chargify.apiPassword"];
chargify.URL = ConfigurationManager.AppSettings["Chargify.url"];
// Without this an error will be thrown.
chargify.ProtocolType = SecurityProtocolType.Tls12;
return chargify;
}
The correct recursive command is:
sudo chmod -R 755 /opt/lampp/htdocs
-R
: change every sub folder including the current folder
use the following function:
def is_numeric? val
return val.try(:to_f).try(:to_s) == val
end
so,
is_numeric? "1.2f"
= false
is_numeric? "1.2"
= true
is_numeric? "12f"
= false
is_numeric? "12"
= true
Just an another ussage example for Notepad++ (regular expression search mode)
Find: (g|c|u|d)(et|reate|pdate|elete)_(.)([^\s (]+)
Replace: \U\1\E$2\U\3\E$4
Example:
get_user -> GetUser
create_user -> CreateUser
update_user -> UpdateUser
delete_user -> DeleteUser
If you need formatting the xml string to xml, try this:
String xmlStr = "your-xml-string";
Source xmlInput = new StreamSource(new StringReader(xmlStr));
Transformer transformer = TransformerFactory.newInstance().newTransformer();
transformer.setOutputProperty(OutputKeys.INDENT, "yes");
transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "2");
transformer.transform(xmlInput,
new StreamResult(new FileOutputStream("response.xml")));
Goto Search->File
You will get an window, you can give either simple search text or regx pattern. Once you enter your search keyword click Search and make sure that Scope is Workspace.
You may use this for Replace as well.
Make sure that the htaccess file is readable by apache:
chmod 644 /var/www/abc/.htaccess
And make sure the directory it's in is readable and executable:
chmod 755 /var/www/abc/
var words_in_text = function (text) {
var regex = /([\u0041-\u005A\u0061-\u007A\u00AA\u00B5\u00BA\u00C0-\u00D6\u00D8-\u00F6\u00F8-\u02C1\u02C6-\u02D1\u02E0-\u02E4\u02EC\u02EE\u0370-\u0374\u0376\u0377\u037A-\u037D\u0386\u0388-\u038A\u038C\u038E-\u03A1\u03A3-\u03F5\u03F7-\u0481\u048A-\u0527\u0531-\u0556\u0559\u0561-\u0587\u05D0-\u05EA\u05F0-\u05F2\u0620-\u064A\u066E\u066F\u0671-\u06D3\u06D5\u06E5\u06E6\u06EE\u06EF\u06FA-\u06FC\u06FF\u0710\u0712-\u072F\u074D-\u07A5\u07B1\u07CA-\u07EA\u07F4\u07F5\u07FA\u0800-\u0815\u081A\u0824\u0828\u0840-\u0858\u08A0\u08A2-\u08AC\u0904-\u0939\u093D\u0950\u0958-\u0961\u0971-\u0977\u0979-\u097F\u0985-\u098C\u098F\u0990\u0993-\u09A8\u09AA-\u09B0\u09B2\u09B6-\u09B9\u09BD\u09CE\u09DC\u09DD\u09DF-\u09E1\u09F0\u09F1\u0A05-\u0A0A\u0A0F\u0A10\u0A13-\u0A28\u0A2A-\u0A30\u0A32\u0A33\u0A35\u0A36\u0A38\u0A39\u0A59-\u0A5C\u0A5E\u0A72-\u0A74\u0A85-\u0A8D\u0A8F-\u0A91\u0A93-\u0AA8\u0AAA-\u0AB0\u0AB2\u0AB3\u0AB5-\u0AB9\u0ABD\u0AD0\u0AE0\u0AE1\u0B05-\u0B0C\u0B0F\u0B10\u0B13-\u0B28\u0B2A-\u0B30\u0B32\u0B33\u0B35-\u0B39\u0B3D\u0B5C\u0B5D\u0B5F-\u0B61\u0B71\u0B83\u0B85-\u0B8A\u0B8E-\u0B90\u0B92-\u0B95\u0B99\u0B9A\u0B9C\u0B9E\u0B9F\u0BA3\u0BA4\u0BA8-\u0BAA\u0BAE-\u0BB9\u0BD0\u0C05-\u0C0C\u0C0E-\u0C10\u0C12-\u0C28\u0C2A-\u0C33\u0C35-\u0C39\u0C3D\u0C58\u0C59\u0C60\u0C61\u0C85-\u0C8C\u0C8E-\u0C90\u0C92-\u0CA8\u0CAA-\u0CB3\u0CB5-\u0CB9\u0CBD\u0CDE\u0CE0\u0CE1\u0CF1\u0CF2\u0D05-\u0D0C\u0D0E-\u0D10\u0D12-\u0D3A\u0D3D\u0D4E\u0D60\u0D61\u0D7A-\u0D7F\u0D85-\u0D96\u0D9A-\u0DB1\u0DB3-\u0DBB\u0DBD\u0DC0-\u0DC6\u0E01-\u0E30\u0E32\u0E33\u0E40-\u0E46\u0E81\u0E82\u0E84\u0E87\u0E88\u0E8A\u0E8D\u0E94-\u0E97\u0E99-\u0E9F\u0EA1-\u0EA3\u0EA5\u0EA7\u0EAA\u0EAB\u0EAD-\u0EB0\u0EB2\u0EB3\u0EBD\u0EC0-\u0EC4\u0EC6\u0EDC-\u0EDF\u0F00\u0F40-\u0F47\u0F49-\u0F6C\u0F88-\u0F8C\u1000-\u102A\u103F\u1050-\u1055\u105A-\u105D\u1061\u1065\u1066\u106E-\u1070\u1075-\u1081\u108E\u10A0-\u10C5\u10C7\u10CD\u10D0-\u10FA\u10FC-\u1248\u124A-\u124D\u1250-\u1256\u1258\u125A-\u125D\u1260-\u1288\u128A-\u128D\u1290-\u12B0\u12B2-\u12B5\u12B8-\u12BE\u12C0\u12C2-\u12C5\u12C8-\u12D6\u12D8-\u1310\u1312-\u1315\u1318-\u135A\u1380-\u138F\u13A0-\u13F4\u1401-\u166C\u166F-\u167F\u1681-\u169A\u16A0-\u16EA\u1700-\u170C\u170E-\u1711\u1720-\u1731\u1740-\u1751\u1760-\u176C\u176E-\u1770\u1780-\u17B3\u17D7\u17DC\u1820-\u1877\u1880-\u18A8\u18AA\u18B0-\u18F5\u1900-\u191C\u1950-\u196D\u1970-\u1974\u1980-\u19AB\u19C1-\u19C7\u1A00-\u1A16\u1A20-\u1A54\u1AA7\u1B05-\u1B33\u1B45-\u1B4B\u1B83-\u1BA0\u1BAE\u1BAF\u1BBA-\u1BE5\u1C00-\u1C23\u1C4D-\u1C4F\u1C5A-\u1C7D\u1CE9-\u1CEC\u1CEE-\u1CF1\u1CF5\u1CF6\u1D00-\u1DBF\u1E00-\u1F15\u1F18-\u1F1D\u1F20-\u1F45\u1F48-\u1F4D\u1F50-\u1F57\u1F59\u1F5B\u1F5D\u1F5F-\u1F7D\u1F80-\u1FB4\u1FB6-\u1FBC\u1FBE\u1FC2-\u1FC4\u1FC6-\u1FCC\u1FD0-\u1FD3\u1FD6-\u1FDB\u1FE0-\u1FEC\u1FF2-\u1FF4\u1FF6-\u1FFC\u2071\u207F\u2090-\u209C\u2102\u2107\u210A-\u2113\u2115\u2119-\u211D\u2124\u2126\u2128\u212A-\u212D\u212F-\u2139\u213C-\u213F\u2145-\u2149\u214E\u2183\u2184\u2C00-\u2C2E\u2C30-\u2C5E\u2C60-\u2CE4\u2CEB-\u2CEE\u2CF2\u2CF3\u2D00-\u2D25\u2D27\u2D2D\u2D30-\u2D67\u2D6F\u2D80-\u2D96\u2DA0-\u2DA6\u2DA8-\u2DAE\u2DB0-\u2DB6\u2DB8-\u2DBE\u2DC0-\u2DC6\u2DC8-\u2DCE\u2DD0-\u2DD6\u2DD8-\u2DDE\u2E2F\u3005\u3006\u3031-\u3035\u303B\u303C\u3041-\u3096\u309D-\u309F\u30A1-\u30FA\u30FC-\u30FF\u3105-\u312D\u3131-\u318E\u31A0-\u31BA\u31F0-\u31FF\u3400-\u4DB5\u4E00-\u9FCC\uA000-\uA48C\uA4D0-\uA4FD\uA500-\uA60C\uA610-\uA61F\uA62A\uA62B\uA640-\uA66E\uA67F-\uA697\uA6A0-\uA6E5\uA717-\uA71F\uA722-\uA788\uA78B-\uA78E\uA790-\uA793\uA7A0-\uA7AA\uA7F8-\uA801\uA803-\uA805\uA807-\uA80A\uA80C-\uA822\uA840-\uA873\uA882-\uA8B3\uA8F2-\uA8F7\uA8FB\uA90A-\uA925\uA930-\uA946\uA960-\uA97C\uA984-\uA9B2\uA9CF\uAA00-\uAA28\uAA40-\uAA42\uAA44-\uAA4B\uAA60-\uAA76\uAA7A\uAA80-\uAAAF\uAAB1\uAAB5\uAAB6\uAAB9-\uAABD\uAAC0\uAAC2\uAADB-\uAADD\uAAE0-\uAAEA\uAAF2-\uAAF4\uAB01-\uAB06\uAB09-\uAB0E\uAB11-\uAB16\uAB20-\uAB26\uAB28-\uAB2E\uABC0-\uABE2\uAC00-\uD7A3\uD7B0-\uD7C6\uD7CB-\uD7FB\uF900-\uFA6D\uFA70-\uFAD9\uFB00-\uFB06\uFB13-\uFB17\uFB1D\uFB1F-\uFB28\uFB2A-\uFB36\uFB38-\uFB3C\uFB3E\uFB40\uFB41\uFB43\uFB44\uFB46-\uFBB1\uFBD3-\uFD3D\uFD50-\uFD8F\uFD92-\uFDC7\uFDF0-\uFDFB\uFE70-\uFE74\uFE76-\uFEFC\uFF21-\uFF3A\uFF41-\uFF5A\uFF66-\uFFBE\uFFC2-\uFFC7\uFFCA-\uFFCF\uFFD2-\uFFD7\uFFDA-\uFFDC]+)/g;
return text.match(regex);
};
words_in_text('Düsseldorf, Köln, ??????, ???, ??????? !@#$');
// returns array ["Düsseldorf", "Köln", "??????", "???", "???????"]
This regex will match all words in the text of any language...
Another approach is to use an object for initial storage of the array information. Then convert back. For example:
var arr = ['0','1','1','2','3','3','3'];
var obj = {};
for(var i in arr)
obj[i] = true;
arr = [];
for(var i in obj)
arr.push(i);
Variable "arr" now contains ["0", "1", "2", "3", "4", "5", "6"]
I took hhafez code and added a memory test:
private static void test() {
Runtime runtime = Runtime.getRuntime();
long memory;
...
memory = runtime.freeMemory();
// for loop code
memory = memory-runtime.freeMemory();
I run this separately for each approach, the '+' operator, String.format and StringBuilder (calling toString()), so the memory used will not be affected by other approaches. I added more concatenations, making the string as "Blah" + i + "Blah"+ i +"Blah" + i + "Blah".
The result are as follow (average of 5 runs each):
Approach Time(ms) Memory allocated (long)
'+' operator 747 320,504
String.format 16484 373,312
StringBuilder 769 57,344
We can see that String '+' and StringBuilder are practically identical time-wise, but StringBuilder is much more efficient in memory use. This is very important when we have many log calls (or any other statements involving strings) in a time interval short enough so the Garbage Collector won't get to clean the many string instances resulting of the '+' operator.
And a note, BTW, don't forget to check the logging level before constructing the message.
Conclusions: