Json isn't a huge language to start with, so libraries for it are likely to be small(er than Xml libraries, at least).

There are a whole ton of C libraries linked at Json.org. Maybe one of them will work well for you.

Since the Logical Address space is 32-bit long that means program size is 2^32 bytes i.e. 4GB. Now we have the page size of 4KB i.e.2^12 bytes.Thus the number of pages in program are 2^20.(no. of pages in program = program size/page size).Now the size of page table entry is 4 byte hence the size of page table is 2^20*4 = 4MB(size of page table = no. of pages in program * page table entry size). Hence 4MB space is required in Memory to store the page table.

I found the regexp.source changed from node v12.11.0, maybe the new v8 engine caused. see more on https://github.com/nodejs/node/releases/tag/v12.11.0.

D:\code\react-native>nvm use 12.10.0
Now using node v12.10.0 (64-bit)

D:\code\react-native>node
Welcome to Node.js v12.10.0.
Type ".help" for more information.
> /node_modules[/\\]react[/\\]dist[/\\].*/.source
'node_modules[\\/\\\\]react[\\/\\\\]dist[\\/\\\\].*'
> /node_modules[/\\]react[/\\]dist[/\\].*/.source.replace(/\//g, path.sep)
'node_modules[\\\\\\\\]react[\\\\\\\\]dist[\\\\\\\\].*'
>
(To exit, press ^C again or ^D or type .exit)
>

D:\code\react-native>nvm use 12.11.0
Now using node v12.11.0 (64-bit)

D:\code\react-native>node
Welcome to Node.js v12.11.0.
Type ".help" for more information.
> /node_modules[/\\]react[/\\]dist[/\\].*/.source
'node_modules[/\\\\]react[/\\\\]dist[/\\\\].*'
> /node_modules[/\\]react[/\\]dist[/\\].*/.source.replace(/\//g, path.sep)
'node_modules[\\\\\\]react[\\\\\\]dist[\\\\\\].*'
>
(To exit, press ^C again or ^D or type .exit)
>

D:\code\react-native>nvm use 12.13.0
Now using node v12.13.0 (64-bit)

D:\code\react-native>node
Welcome to Node.js v12.13.0.
Type ".help" for more information.
> /node_modules[/\\]react[/\\]dist[/\\].*/.source
'node_modules[/\\\\]react[/\\\\]dist[/\\\\].*'
> /node_modules[/\\]react[/\\]dist[/\\].*/.source.replace(/\//g, path.sep)
'node_modules[\\\\\\]react[\\\\\\]dist[\\\\\\].*'
>
(To exit, press ^C again or ^D or type .exit)
>

D:\code\react-native>nvm use 13.3.0
Now using node v13.3.0 (64-bit)

D:\code\react-native>node
Welcome to Node.js v13.3.0.
Type ".help" for more information.
> /node_modules[/\\]react[/\\]dist[/\\].*/.source
'node_modules[/\\\\]react[/\\\\]dist[/\\\\].*'
> /node_modules[/\\]react[/\\]dist[/\\].*/.source.replace(/\//g, path.sep)
'node_modules[\\\\\\]react[\\\\\\]dist[\\\\\\].*'
>

screen.orientation.lock('landscape');

Will force it to change to and stay in landscape mode. Tested on Nexus 5.

http://www.w3.org/TR/screen-orientation/#examples

As per my Answer here: How to remove a directory from git repository?

To remove folder/directory only from git repository and not from the local try 3 simple steps.

Steps to remove directory

git rm -r --cached FolderName
git commit -m "Removed folder from repository"
git push origin master

Steps to ignore that folder in next commits

To ignore that folder from next commits make one file in root named .gitignore and put that folders name into it. You can put as many as you want

.gitignore file will be look like this

/FolderName

If you have forked a repository fro Delete your forked copy and fork it again from master.

Below is how it's working for me on Python 3.6:

import requests
import urllib3

# Suppress InsecureRequestWarning: Unverified HTTPS
urllib3.disable_warnings()

Now there are a lot of cloud providers , providing solutions like MBaaS (Mobile Backend as a Service). Some only give access to cloud database, some will do the user management for you, some let you place code around cloud database and there are facilities of access control, push notifications, analytics, integrated image and file hosting etc.

Here are some providers which have a "free-tier" (may change in future):

1. Firebase (Google) - https://firebase.google.com/
2. AWS Mobile (Amazon) - https://aws.amazon.com/mobile/
3. Azure Mobile (Microsoft) - https://azure.microsoft.com/en-in/services/app-service/mobile/
4. MongoDB Realm (MongoDB) - https://www.mongodb.com/realm
5. Back4app (Popular) - https://www.back4app.com/

Open source solutions:

1. Parse - http://parseplatform.org/
2. Apache User Grid - https://usergrid.apache.org/
3. SupaBase (under development) - https://supabase.io/

Time to go back in time for a lesson. While we don't think about these things much in our fancy managed languages today, they are built on the same foundation, so let's look at how memory is managed in C.

Before I dive in, a quick explanation of what the term "pointer" means. A pointer is simply a variable that "points" to a location in memory. It doesn't contain the actual value at this area of memory, it contains the memory address to it. Think of a block of memory as a mailbox. The pointer would be the address to that mailbox.

In C, an array is simply a pointer with an offset, the offset specifies how far in memory to look. This provides O(1) access time.

  MyArray   [5]
     ^       ^
  Pointer  Offset

All other data structures either build upon this, or do not use adjacent memory for storage, resulting in poor random access look up time (Though there are other benefits to not using sequential memory).

For example, let's say we have an array with 6 numbers (6,4,2,3,1,5) in it, in memory it would look like this:

=====================================
|  6  |  4  |  2  |  3  |  1  |  5  |
=====================================

In an array, we know that each element is next to each other in memory. A C array (Called MyArray here) is simply a pointer to the first element:

=====================================
|  6  |  4  |  2  |  3  |  1  |  5  |
=====================================
   ^
MyArray

If we wanted to look up MyArray[4], internally it would be accessed like this:

   0     1     2     3     4 
=====================================
|  6  |  4  |  2  |  3  |  1  |  5  |
=====================================
                           ^
MyArray + 4 ---------------/
(Pointer + Offset)

Because we can directly access any element in the array by adding the offset to the pointer, we can look up any element in the same amount of time, regardless of the size of the array. This means that getting MyArray[1000] would take the same amount of time as getting MyArray[5].

An alternative data structure is a linked list. This is a linear list of pointers, each pointing to the next node

========    ========    ========    ========    ========
| Data |    | Data |    | Data |    | Data |    | Data |
|      | -> |      | -> |      | -> |      | -> |      | 
|  P1  |    |  P2  |    |  P3  |    |  P4  |    |  P5  |        
========    ========    ========    ========    ========

P(X) stands for Pointer to next node.

Note that I made each "node" into its own block. This is because they are not guaranteed to be (and most likely won't be) adjacent in memory.

If I want to access P3, I can't directly access it, because I don't know where it is in memory. All I know is where the root (P1) is, so instead I have to start at P1, and follow each pointer to the desired node.

This is a O(N) look up time (The look up cost increases as each element is added). It is much more expensive to get to P1000 compared to getting to P4.

Higher level data structures, such as hashtables, stacks and queues, all may use an array (or multiple arrays) internally, while Linked Lists and Binary Trees usually use nodes and pointers.

You might wonder why anyone would use a data structure that requires linear traversal to look up a value instead of just using an array, but they have their uses.

Take our array again. This time, I want to find the array element that holds the value '5'.

=====================================
|  6  |  4  |  2  |  3  |  1  |  5  |
=====================================
   ^     ^     ^     ^     ^   FOUND!

In this situation, I don't know what offset to add to the pointer to find it, so I have to start at 0, and work my way up until I find it. This means I have to perform 6 checks.

Because of this, searching for a value in an array is considered O(N). The cost of searching increases as the array gets larger.

Remember up above where I said that sometimes using a non sequential data structure can have advantages? Searching for data is one of these advantages and one of the best examples is the Binary Tree.

A Binary Tree is a data structure similar to a linked list, however instead of linking to a single node, each node can link to two children nodes.

         ==========
         |  Root  |         
         ==========
        /          \ 
  =========       =========
  | Child |       | Child |
  =========       =========
                  /       \
            =========    =========
            | Child |    | Child |
            =========    =========

 Assume that each connector is really a Pointer

When data is inserted into a binary tree, it uses several rules to decide where to place the new node. The basic concept is that if the new value is greater than the parents, it inserts it to the left, if it is lower, it inserts it to the right.

This means that the values in a binary tree could look like this:

         ==========
         |   100  |         
         ==========
        /          \ 
  =========       =========
  |  200  |       |   50  |
  =========       =========
                  /       \
            =========    =========
            |   75  |    |   25  |
            =========    =========

When searching a binary tree for the value of 75, we only need to visit 3 nodes ( O(log N) ) because of this structure:

• Is 75 less than 100? Look at Right Node
• Is 75 greater than 50? Look at Left Node
• There is the 75!

Even though there are 5 nodes in our tree, we did not need to look at the remaining two, because we knew that they (and their children) could not possibly contain the value we were looking for. This gives us a search time that at worst case means we have to visit every node, but in the best case we only have to visit a small portion of the nodes.

That is where arrays get beat, they provide a linear O(N) search time, despite O(1) access time.

This is an incredibly high level overview on data structures in memory, skipping over a lot of details, but hopefully it illustrates an array's strength and weakness compared to other data structures.

Based on my experience, solution which is fine(the best) when keys are not important:

$cart = [];
$cart[] = 13;
$cart[] = "foo";
$cart[] = obj;

EOF is a special out-of-band signal which means the end of input. It's not a character (though in the old DOS days, 0x1B acted like EOF), but rather a signal from the OS that the input has ended.

On Windows, you can "input" an EOF by pressing Ctrl+Z at the command prompt. This signals the terminal to close the input stream, which presents an EOF to the running program. Note that on other OSes or terminal emulators, EOF is usually signalled using Ctrl+D.

As for your issue with Sublime Text 2, it seems that stdin is not connected to the terminal when running a program within Sublime, and so consequently programs start off connected to an empty file (probably nul or /dev/null). See also Python 3.1 and Sublime Text 2 error.

Sometimes it may be better to use chrome.storage API. It's better then localStorage because you can:

• store information from your content script without the need for message passing between content script and extension;
• store your data as JavaScript objects without serializing them to JSON (localStorage only stores strings).

Here's a simple code demonstrating the use of chrome.storage. Content script gets the url of visited page and timestamp and stores it, popup.js gets it from storage area.

content_script.js

(function () {
    var visited = window.location.href;
    var time = +new Date();
    chrome.storage.sync.set({'visitedPages':{pageUrl:visited,time:time}}, function () {
        console.log("Just visited",visited)
    });
})();

popup.js

(function () {
    chrome.storage.onChanged.addListener(function (changes,areaName) {
        console.log("New item in storage",changes.visitedPages.newValue);
    })
})();

"Changes" here is an object that contains old and new value for a given key. "AreaName" argument refers to name of storage area, either 'local', 'sync' or 'managed'.

Remember to declare storage permission in manifest.json.

manifest.json

...
"permissions": [
    "storage"
 ],
...

I solved this problem by using reverse proxy approach.

I installed wamp server and used simple reverse proxy feature of apache web server.

I added a new port to listen to Apache web server (8081). Then I added proxy configuration as virtualhost for that port.

<VirtualHost *:8081>
ProxyPass / http://localhost:46935/
ProxyPassReverse / http://localhost:46935/
</VirtualHost>

The creators of the .NET framework want you to use XML-based config files, rather than INI files. So no, there is no built-in mechanism for reading them.

There are third party solutions available, though.

• INI handlers can be obtained as NuGet packages, such as INI Parser.
• You can write your own INI handler, which is the old-school, laborious way. It gives you more control over the implementation, which you can use for bad or good. See e.g. an INI file handling class using C#, P/Invoke and Win32.

SignTool is available as part of the Windows SDK (which comes with Visual Studio Community 2015). Make sure to select the "ClickOnce Publishing Tools" from the feature list during the installation of Visual Studio 2015 to get the SignTool.

Once Visual Studio is installed you can run the signtool command from the Visual Studio Command Prompt.

By default (on Windows 10) the SignTool will be installed in:

• C:\Program Files (x86)\Windows Kits\10\bin\x86\signtool.exe

Try FileReader, this reader is meant to read stream of character, while FileInputStream is meant to read raw data.

From the Javadoc:

FileReader is meant for reading streams of characters. For reading streams of raw bytes, consider using a FileInputStream.

Since you wanna read a log file, FileReader is the class to use IMO.

The easiest-to-understand definition of Aggregate is that it performs an operation on each element of the list taking into account the operations that have gone before. That is to say it performs the action on the first and second element and carries the result forward. Then it operates on the previous result and the third element and carries forward. etc.

Example 1. Summing numbers

var nums = new[]{1,2,3,4};
var sum = nums.Aggregate( (a,b) => a + b);
Console.WriteLine(sum); // output: 10 (1+2+3+4)

This adds 1 and 2 to make 3. Then adds 3 (result of previous) and 3 (next element in sequence) to make 6. Then adds 6 and 4 to make 10.

Example 2. create a csv from an array of strings

var chars = new []{"a","b","c", "d"};
var csv = chars.Aggregate( (a,b) => a + ',' + b);
Console.WriteLine(csv); // Output a,b,c,d

This works in much the same way. Concatenate a a comma and b to make a,b. Then concatenates a,b with a comma and c to make a,b,c. and so on.

Example 3. Multiplying numbers using a seed

For completeness, there is an overload of Aggregate which takes a seed value.

var multipliers = new []{10,20,30,40};
var multiplied = multipliers.Aggregate(5, (a,b) => a * b);
Console.WriteLine(multiplied); //Output 1200000 ((((5*10)*20)*30)*40)

Much like the above examples, this starts with a value of 5 and multiplies it by the first element of the sequence 10 giving a result of 50. This result is carried forward and multiplied by the next number in the sequence 20 to give a result of 1000. This continues through the remaining 2 element of the sequence.

Live examples: http://rextester.com/ZXZ64749
Docs: http://msdn.microsoft.com/en-us/library/bb548651.aspx

Addendum

Example 2, above, uses string concatenation to create a list of values separated by a comma. This is a simplistic way to explain the use of Aggregate which was the intention of this answer. However, if using this technique to actually create a large amount of comma separated data, it would be more appropriate to use a StringBuilder, and this is entirely compatible with Aggregate using the seeded overload to initiate the StringBuilder.

var chars = new []{"a","b","c", "d"};
var csv = chars.Aggregate(new StringBuilder(), (a,b) => {
    if(a.Length>0)
        a.Append(",");
    a.Append(b);
    return a;
});
Console.WriteLine(csv);

Updated example: http://rextester.com/YZCVXV6464

I think there may be problem that you haven't added click listener for ok positive button.

dlgAlert.setPositiveButton("Ok",
    new DialogInterface.OnClickListener() {
        public void onClick(DialogInterface dialog, int which) {
          //dismiss the dialog  
        }
    });

So, static methods are the methods which can be called without creating the object of a class. For Example :-

    @staticmethod
    def add(a, b):
        return a + b

b = A.add(12,12)
print b

In the above example method add is called by the class name A not the object name.

Unfortunately, "shallow copy", "deep copy" and "clone" are all rather ill-defined terms.

In the Java context, we first need to make a distinction between "copying a value" and "copying an object".

int a = 1;
int b = a;     // copying a value
int[] s = new int[]{42};
int[] t = s;   // copying a value (the object reference for the array above)

StringBuffer sb = new StringBuffer("Hi mom");
               // copying an object.
StringBuffer sb2 = new StringBuffer(sb);

In short, an assignment of a reference to a variable whose type is a reference type is "copying a value" where the value is the object reference. To copy an object, something needs to use new, either explicitly or under the hood.

Now for "shallow" versus "deep" copying of objects. Shallow copying generally means copying only one level of an object, while deep copying generally means copying more than one level. The problem is in deciding what we mean by a level. Consider this:

public class Example {
    public int foo;
    public int[] bar;
    public Example() { };
    public Example(int foo, int[] bar) { this.foo = foo; this.bar = bar; };
}

Example eg1 = new Example(1, new int[]{1, 2});
Example eg2 = ... 

The normal interpretation is that a "shallow" copy of eg1 would be a new Example object whose foo equals 1 and whose bar field refers to the same array as in the original; e.g.

Example eg2 = new Example(eg1.foo, eg1.bar);

The normal interpretation of a "deep" copy of eg1 would be a new Example object whose foo equals 1 and whose bar field refers to a copy of the original array; e.g.

Example eg2 = new Example(eg1.foo, Arrays.copy(eg1.bar));

(People coming from a C / C++ background might say that a reference assignment produces a shallow copy. However, that's not what we normally mean by shallow copying in the Java context ...)

Two more questions / areas of uncertainty exist:

• How deep is deep? Does it stop at two levels? Three levels? Does it mean the whole graph of connected objects?

• What about encapsulated data types; e.g. a String? A String is actually not just one object. In fact, it is an "object" with some scalar fields, and a reference to an array of characters. However, the array of characters is completely hidden by the API. So, when we talk about copying a String, does it make sense to call it a "shallow" copy or a "deep" copy? Or should we just call it a copy?

Finally, clone. Clone is a method that exists on all classes (and arrays) that is generally thought to produce a copy of the target object. However:

• The specification of this method deliberately does not say whether this is a shallow or deep copy (assuming that is a meaningful distinction).

• In fact, the specification does not even specifically state that clone produces a new object.

Here's what the javadoc says:

"Creates and returns a copy of this object. The precise meaning of "copy" may depend on the class of the object. The general intent is that, for any object x, the expression x.clone() != x will be true, and that the expression x.clone().getClass() == x.getClass() will be true, but these are not absolute requirements. While it is typically the case that x.clone().equals(x) will be true, this is not an absolute requirement."

Note, that this is saying that at one extreme the clone might be the target object, and at the other extreme the clone might not equal the original. And this assumes that clone is even supported.

In short, clone potentially means something different for every Java class.

Some people argue (as @supercat does in comments) that the Java clone() method is broken. But I think the correct conclusion is that the concept of clone is broken in the context of OO. AFAIK, it is impossible to develop a unified model of cloning that is consistent and usable across all object types.

calling a function is simple ..

 myFunction();

so your code will be something like..

 $(function(){
     $('#elementID').click(function(){
         myFuntion();  //this will call your function
    });
 });

  $(function(){
     $('#elementID').click( myFuntion );

 });

or with some condition

if(something){
   myFunction();  //this will call your function
}

If this occures on a SELECT with many columns, the cause can be that mysql is creating a temporary table. If this table is too large to fit in memory, it will use its default temp table format, which is InnoDB, to store it on Disk. In this case the InnoDB size limits apply.

You then have 4 options:

1. change the innodb row size limit like stated in another post, which requires reinitialization of the server.
2. change your query to include less columns or avoid causing it to create a temporary table (by i.e. removing order by and limit clauses).
3. changing max_heap_table_size to be large so the result fits in memory and does not need to get written to disk.

4. change the default temp table format to MYISAM, this is what i did. Change in my.cnf:

   internal_tmp_disk_storage_engine=MYISAM
   

Restart mysql, query works.

To set https globally instead of git://:

git config --global url.https://github.com/.insteadOf git://github.com/

Every once and a while the suggestions above stop working, if I restart Visual Studio they start working again though.

I came across this question while searching for a way to check if a module is loaded from the command line and would like to share my thoughts for the ones coming after me and looking for the same:

Linux/UNIX script file method: make a file module_help.py:

#!/usr/bin/env python

help('modules')

Then make sure it's executable: chmod u+x module_help.py

And call it with a pipe to grep:

./module_help.py | grep module_name

Invoke the built-in help system. (This function is intended for interactive use.) If no argument is given, the interactive help system starts on the interpreter console. If the argument is a string, then the string is looked up as the name of a module, function, class, method, keyword, or documentation topic, and a help page is printed on the console. If the argument is any other kind of object, a help page on the object is generated.

Interactive method: in the console load python

>>> help('module_name')

If found quit reading by typing q
To exit the python interactive session press Ctrl + D

Windows script file method also Linux/UNIX compatible, and better overall:

#!/usr/bin/env python

import sys

help(sys.argv[1])

Calling it from the command like:

python module_help.py site  

Would output:

Help on module site:

NAME site - Append module search paths for third-party packages to sys.path.

FILE /usr/lib/python2.7/site.py

MODULE DOCS http://docs.python.org/library/site

DESCRIPTION
...
:

and you'd have to press q to exit interactive mode.

Using it unknown module:

python module_help.py lkajshdflkahsodf

Would output:

no Python documentation found for 'lkajshdflkahsodf'

and exit.

Format %lf is a perfectly correct printf format for double, exactly as you used it. There's nothing wrong with your code.

Format %lf in printf was not supported in old (pre-C99) versions of C language, which created superficial "inconsistency" between format specifiers for double in printf and scanf. That superficial inconsistency has been fixed in C99.

You are not required to use %lf with double in printf. You can use %f as well, if you so prefer (%lf and %f are equivalent in printf). But in modern C it makes perfect sense to prefer to use %f with float, %lf with double and %Lf with long double, consistently in both printf and scanf.

I have encountered with same issue. When I changed content type it has solved. I'm not sure this solution will help you but maybe it is. If you don't mind about content-type, it worked for me.

axios.defaults.headers.post['Content-Type'] ='application/x-www-form-urlencoded';

If you've opened a table and you want to clear an existing value to NULL, click on the value, and press Ctrl+0.

DO
$do$
BEGIN
   IF EXISTS (SELECT FROM orders) THEN
      DELETE FROM orders;
   ELSE
      INSERT INTO orders VALUES (1,2,3);
   END IF;
END
$do$

There are no procedural elements in standard SQL. The IF statement is part of the default procedural language PL/pgSQL. You need to create a function or execute an ad-hoc statement with the DO command.

You need a semicolon (;) at the end of each statement in plpgsql (except for the final END).

You need END IF; at the end of the IF statement.

A sub-select must be surrounded by parentheses:

    IF (SELECT count(*) FROM orders) > 0 ...

Or:

    IF (SELECT count(*) > 0 FROM orders) ...

This is equivalent and much faster, though:

    IF EXISTS (SELECT FROM orders) ...

Alternative

The additional SELECT is not needed. This does the same, faster:

DO
$do$
BEGIN
   DELETE FROM orders;
   IF NOT FOUND THEN
      INSERT INTO orders VALUES (1,2,3);
   END IF;
END
$do$

Though unlikely, concurrent transactions writing to the same table may interfere. To be absolutely sure, write-lock the table in the same transaction before proceeding as demonstrated.

If you want to do this in RegexBuddy, there are two ways to get a list of all lines not matching a regex.

On the toolbar on the Test panel, set the test scope to "Line by line". When you do that, an item List All Lines without Matches will appear under the List All button on the same toolbar. (If you don't see the List All button, click the Match button in the main toolbar.)

On the GREP panel, you can turn on the "line-based" and the "invert results" checkboxes to get a list of non-matching lines in the files you're grepping through.

Please visit this ODP site set up by oracle for Microsoft OracleClient Developers: http://www.oracle.com/technetwork/topics/dotnet/index-085703.html

Also below is a sample code that can get you started to call a stored procedure from C# to Oracle. PKG_COLLECTION.CSP_COLLECTION_HDR_SELECT is the stored procedure built on Oracle accepting parameters PUNIT, POFFICE, PRECEIPT_NBR and returning the result in T_CURSOR.

using Oracle.DataAccess;
using Oracle.DataAccess.Client;

public DataTable GetHeader_BySproc(string unit, string office, string receiptno)
{
    using (OracleConnection cn = new OracleConnection(DatabaseHelper.GetConnectionString()))
    {
        OracleDataAdapter da = new OracleDataAdapter();
        OracleCommand cmd = new OracleCommand();
        cmd.Connection = cn;
        cmd.InitialLONGFetchSize = 1000;
        cmd.CommandText = DatabaseHelper.GetDBOwner() + "PKG_COLLECTION.CSP_COLLECTION_HDR_SELECT";
        cmd.CommandType = CommandType.StoredProcedure;
        cmd.Parameters.Add("PUNIT", OracleDbType.Char).Value = unit;
        cmd.Parameters.Add("POFFICE", OracleDbType.Char).Value = office;
        cmd.Parameters.Add("PRECEIPT_NBR", OracleDbType.Int32).Value = receiptno;
        cmd.Parameters.Add("T_CURSOR", OracleDbType.RefCursor).Direction = ParameterDirection.Output;

        da.SelectCommand = cmd;
        DataTable dt = new DataTable();
        da.Fill(dt);
        return dt;
    }
}

hosts0 = open("C:path\\a.txt","r")
hosts1 = open("C:path\\b.txt","r")

lines1 = hosts0.readlines()

for i,lines2 in enumerate(hosts1):
    if lines2 != lines1[i]:
        print "line ", i, " in hosts1 is different \n"
        print lines2
    else:
        print "same"

The above code is working for me. Can you please indicate what error you are facing?

You don't need to use the clipboard, you can export directly the whole resultset (not just what you see) to a file :

1. Execute your query
2. Right click any anywhere in the results
3. click "Export resultset..." to open the export wizard
4. Choose the format you want (CSV according to your question)
5. Review the settings in the next panes when clicking "Next".
6. Set the folder where the file will be created, and "Finish"

The export runs in the background, a popup will appear when it's done.

In newer versions of DBeaver you can just :

1. right click the SQL of the query you want to export
2. Execute > Export from query
3. Choose the format you want (CSV according to your question)
4. Review the settings in the next panes when clicking "Next".
5. Set the folder where the file will be created, and "Finish"

The export runs in the background, a popup will appear when it's done.

Compared to the previous way of doing exports, this saves you step 1 (executing the query) which can be handy with time/resource intensive queries.

When creating a New Project, under the language of your choice, select Web and then change to .NET Framework 3.5 and you will get the option of creating an ASP.NET WEB Service Application.

Simple solution for all your web service requests, assuming you're using jQuery:

$.ajaxPrefilter(function (options, originalOptions, jqXHR) {
    // you can use originalOptions.type || options.type to restrict specific type of requests
    options.data = jQuery.param($.extend(originalOptions.data||{}, { 
      timeStamp: new Date().getTime()
    }));
});

Read more about the jQuery prefilter call here.

If you aren't using jQuery, check the docs for your library of choice. They may have similar functionality.

Typically a .sh file is a shell script which you can execute in a terminal. Specifically, the script you mentioned is a bash script, which you can see if you open the file and look in the first line of the file, which is called the shebang or magic line.

Someone else suggested .PHONY which is definitely correct. .PHONY should be used for any rule for which a date comparison between the input and the output is invalid. Since you don't have any targets of the form output: input you should use .PHONY for ALL of them!

All that said, you probably should define some variables at the top of your makefile for the various filenames, and define real make rules that have both input and output sections so you can use the benefits of make, namely that you'll only actually compile things that are necessary to copmile!

Edit: added example. Untested, but this is how you do .PHONY

.PHONY: clean    
clean:
    $(clean)

onProgressChanged is called every time you move the cursor.

@Override
public void onProgressChanged(SeekBar seekBar, int progress, boolean fromUser) {
    textView.setText(String.valueOf(new Integer(progress)));        
}

so textView should show the progress and alter always if the seekbar is being moved.

To get the numbers after decimal point, you can do this:-

read num1 num2
div=`echo $num1 / $num2 | bc -l`
echo $div

I modified the code and wrapped view update inside $apply().

link: function (scope, elem, attrs, ngModelCtrl){   
var updateModel = function(dateText){
    // call $apply to update the model
    scope.$apply(function(){
        ngModelCtrl.$setViewValue(dateText);
    });
};
var options = {
    dateFormat: "dd/mm/yy",
     // handle jquery date change
    onSelect: function(dateText){
        updateModel(dateText);
    }
};
 // jqueryfy the element
elem.datepicker(options);

}

working fiddle - http://jsfiddle.net/hsfid/SrDV2/1/embedded/result/

Eg:

Datatable newTable =  new DataTable();

            foreach(string s1 in list)
            {
                if (s1 != string.Empty) {
                    dvProducts.RowFilter = "(CODE like '" + serachText + "*') AND (CODE <> '" + s1 + "')";
                    foreach(DataRow dr in dvProducts.ToTable().Rows)
                    {
                       newTable.ImportRow(dr);
                    }
                }
            }
ListView1.DataSource = newTable;
ListView1.DataBind();

This has worked for me:

System.out.println((char)27 + "[31mThis text would show up red" + (char)27 + "[0m");

You need the ending "[37m" to return the color to white (or whatever you were using). If you don't it may make everything that follows "red".

If you're having issues compiling the binary extension, or on a platform where you cant, you can try using the pure python PyMySQL bindings.

Simply pip install pymysql and switch your SQLAlchemy URI to start like this:

SQLALCHEMY_DATABASE_URI = 'mysql+pymysql://.....'

There are some other drivers you could also try.

Another method that people should consider using is Shared Workers. I know it's a cutting edge concept, but you can create a relay on a Shared Worker that is MUCH faster than localstorage, and doesn't require a relationship between the parent/child window, as long as you're on the same origin.

See my answer here for some discussion I made about this.

You need to remove the scanner closing lines: scan.close();

It happened to me before and that was the reason.

If you already know the filename, you can use the boto3 builtin download_fileobj

import boto3

from io import BytesIO

session = boto3.Session()
s3_client = session.client("s3")

f = BytesIO()
s3_client.download_fileobj(bucket_name, filename, f)
f.seek(0)
print(f.getvalue())

You can use Core Graphics to draw the gradient, as pointed to in Mike's response. As a more detailed example, you could create a UIView subclass to use as a background for your UILabel. In that UIView subclass, override the drawRect: method and insert code similar to the following:

- (void)drawRect:(CGRect)rect 
{
    CGContextRef currentContext = UIGraphicsGetCurrentContext();

    CGGradientRef glossGradient;
    CGColorSpaceRef rgbColorspace;
    size_t num_locations = 2;
    CGFloat locations[2] = { 0.0, 1.0 };
    CGFloat components[8] = { 1.0, 1.0, 1.0, 0.35,  // Start color
         1.0, 1.0, 1.0, 0.06 }; // End color

    rgbColorspace = CGColorSpaceCreateDeviceRGB();
    glossGradient = CGGradientCreateWithColorComponents(rgbColorspace, components, locations, num_locations);

    CGRect currentBounds = self.bounds;
    CGPoint topCenter = CGPointMake(CGRectGetMidX(currentBounds), 0.0f);
    CGPoint midCenter = CGPointMake(CGRectGetMidX(currentBounds), CGRectGetMidY(currentBounds));
    CGContextDrawLinearGradient(currentContext, glossGradient, topCenter, midCenter, 0);

    CGGradientRelease(glossGradient);
    CGColorSpaceRelease(rgbColorspace); 
}

This particular example creates a white, glossy-style gradient that is drawn from the top of the UIView to its vertical center. You can set the UIView's backgroundColor to whatever you like and this gloss will be drawn on top of that color. You can also draw a radial gradient using the CGContextDrawRadialGradient function.

You just need to size this UIView appropriately and add your UILabel as a subview of it to get the effect you desire.

EDIT (4/23/2009): Per St3fan's suggestion, I have replaced the view's frame with its bounds in the code. This corrects for the case when the view's origin is not (0,0).

I suggest using

element.getBoundingClientRect()

as proposed here instead of manual offset calculation through offsetLeft, offsetTop and offsetParent. as proposed here Under some circumstances* the manual traversal produces invalid results. See this Plunker: http://plnkr.co/pC8Kgj

*When element is inside of a scrollable parent with static (=default) positioning.

Check this out:

db.collection.find().pretty()

This is the procedure that seems simplest to me:

SharedPreferences sp = getSharedPreferences("MySharedPrefs", MODE_PRIVATE);
SharedPreferences.Editor e = sp.edit();

    if (sp.getString("sharedString", null).equals("true")
            || sp.getString("sharedString", null) == null) {
        e.putString("sharedString", "false").commit();
        // Do something
    } else {
        // Do something else
    }

Grab the radio group and look at the children to see if any are unchecked.

RadioGroup rg = (RadioGroup) view;
int checked = savedInstanceState.getInt(wrap.getAttributeName());

if(checked != -1) {
    RadioButton btn = (RadioButton) rg.getChildAt(checked);
    btn.toggle();
}

q = request.GET.get("q", None)
if q:
    message = 'q= %s' % q
else:
    message = 'Empty'

Use findElements instead of findElement.

findElements will return an empty list if no matching elements are found instead of an exception.

To check that an element is present, you could try this

Boolean isPresent = driver.findElements(By.yourLocator).size() > 0

This will return true if at least one element is found and false if it does not exist.

The official documentation recommends this method:

findElement should not be used to look for non-present elements, use findElements(By) and assert zero length response instead.

I had this error using the Mongo 2.2 driver for PHP:

$collection = $db->selectCollection('post');
$collection->ensureIndex(array('someField', 'someOtherField', 'yetAnotherField')); 

^^DOESN'T WORK

$collection = $db->selectCollection('post');
$collection->ensureIndex(array('someField', 'someOtherField')); 
$collection->ensureIndex(array('yetAnotherField')); 

^^ WORKS! (?!)

Create a Hashtable called "Properties" and add your properties to it.

Here's what I use:

NSString * timestamp = [NSString stringWithFormat:@"%f",[[NSDate date] timeIntervalSince1970] * 1000];

(times 1000 for milliseconds, otherwise, take that out)

If You're using it all the time, it might be nice to declare a macro

#define TimeStamp [NSString stringWithFormat:@"%f",[[NSDate date] timeIntervalSince1970] * 1000]

Then Call it like this:

NSString * timestamp = TimeStamp;

Or as a method:

- (NSString *) timeStamp {
    return [NSString stringWithFormat:@"%f",[[NSDate date] timeIntervalSince1970] * 1000];
}

As TimeInterval

- (NSTimeInterval) timeStamp {
    return [[NSDate date] timeIntervalSince1970] * 1000;
}

NOTE:

The 1000 is to convert the timestamp to milliseconds. You can remove this if you prefer your timeInterval in seconds.

Swift

If you'd like a global variable in Swift, you could use this:

var Timestamp: String {
    return "\(NSDate().timeIntervalSince1970 * 1000)"
}

Then, you can call it

println("Timestamp: \(Timestamp)")

Again, the *1000 is for miliseconds, if you'd prefer, you can remove that. If you want to keep it as an NSTimeInterval

var Timestamp: NSTimeInterval {
    return NSDate().timeIntervalSince1970 * 1000
}

Declare these outside of the context of any class and they'll be accessible anywhere.

Using Powershell it is possible to get just the Version string, i.e. 2.3.4 from any dll or exe with the following command

(Get-Item "C:\program files\OpenVPN\bin\openvpn.exe").VersionInfo.ProductVersion

Tested on Windows 10

<% form_for(@message) do |f| %>
  <%= f.radio_button :contactmethod, 'email', :checked => true %> 
  <%= label :contactmethod_email, 'Email' %>
  <%= f.radio_button :contactmethod, 'sms' %>
  <%= label :contactmethod_sms, 'SMS' %>
<% end %>

You can't get the file size of local files with javascript in a standard way using a web browser.

But if the file is accessible from a remote path, you might be able to send a HEAD request using Javascript, and read the Content-length header, depending on the webserver

Nobody mentioned it, but you can also simply use loc with the index and column labels.

df.loc[2, 'Letters']
# 'C'

Or, if you prefer to use "Numbers" column as reference, you can also set is as an index.

df.set_index('Numbers').loc[3, 'Letters']

I want to move all images with tags.

```
OUT=$(docker images --format '{{.Repository}}:{{.Tag}}')
OUTPUT=($OUT)
docker save $(echo "${OUTPUT[*]}") -o /dir/images.tar
``` 

Explanation:

First OUT gets all tags but separated with new lines. Second OUTPUT gets all tags in an array. Third $(echo "${OUTPUT[*]}") puts all tags for a single docker save command so that all images are in a single tar.

Additionally, this can be zipped using gzip. On target, run:

tar xvf images.tar.gz -O | docker load

-O option to tar puts contents on stdin which can be grabbed by docker load.

This really isn't too hard to implement with ModelForms. So lets say you have Forms A, B, and C. You print out each of the forms and the page and now you need to handle the POST.

if request.POST():
    a_valid = formA.is_valid()
    b_valid = formB.is_valid()
    c_valid = formC.is_valid()
    # we do this since 'and' short circuits and we want to check to whole page for form errors
    if a_valid and b_valid and c_valid:
        a = formA.save()
        b = formB.save(commit=False)
        c = formC.save(commit=False)
        b.foreignkeytoA = a
        b.save()
        c.foreignkeytoB = b
        c.save()

Here are the docs for custom validation.

You need to use the alias directive for location /static:

server {

  index index.html;
  server_name test.example.com;

  root /web/test.example.com/www;

  location /static/ {
    alias /web/test.example.com/static/;
  }

}

The nginx wiki explains the difference between root and alias better than I can:

Note that it may look similar to the root directive at first sight, but the document root doesn't change, just the file system path used for the request. The location part of the request is dropped in the request Nginx issues.

Note that root and alias handle trailing slashes differently.

... and so you should do something like this:

set(tuple ((a,b) for a in range(3)) for b in range(3))

... and if needed convert back to list

It is clear that tvi.header is not a String. The == is an operator that is overloaded by String class, which means it will be working only if compiler knows that both side of the operator are String.

Are there properties that aren't 'transitional'?

Answer: Yes.

If the property is not listed here it is not 'transitional'.

Reference: Animatable CSS Properties

It has to do with BASE: the BASE jumper kind is always Basically Available (to new relationships), in a Soft state (none of his relationship last very long) and Eventually consistent (one day he will get married).

In case you don't have some id, e.g., mysite.com/something/9182301, you can use get_object_or_404 importing by from django.shortcuts import get_object_or_404.

Use example:

def myFunc(request, my_pk):
    my_var = get_object_or_404(CLASS_NAME, pk=my_pk)

Came across this looking for something else. While the post looks fairly old, the easiest solution in bash is illustrated below (at least bash 4) using set -- "${@:#}" where # is the starting number of the array element we want to preserve forward:

    #!/bin/bash

    someVar="${1}"
    someOtherVar="${2}"
    set -- "${@:3}"
    input=${@}

    [[ "${input[*],,}" == *"someword"* ]] && someNewVar="trigger"

    echo -e "${someVar}\n${someOtherVar}\n${someNewVar}\n\n${@}"

Basically, the set -- "${@:3}" just pops off the first two elements in the array like perl's shift and preserves all remaining elements including the third. I suspect there's a way to pop off the last elements as well.

While defining multi-line triggers one has to change the delimiter as semicolon will be taken by MySQL compiler as end of trigger and generate error. e.g.

DELIMITER //
CREATE TRIGGER `MyTable_UPDATE` BEFORE UPDATE ON `MyTable`
FOR EACH ROW BEGIN
        -- Set the udpate date
    Set new.UpdateDate = now();
END//
DELIMITER ;

Yes, if bar is not None is more explicit, and thus better, assuming it is indeed what you want. That's not always the case, there are subtle differences: if not bar: will execute if bar is any kind of zero or empty container, or False. Many people do use not bar where they really do mean bar is not None.

The problem, as it is described, corresponds exactly to the bug MySQL Bugs: #74147: empty grid result, incompatibiliity with libglib_2.42

The good news is it's almost closed.

A patch is available since today.

EDIT : In Debian Jessie (testing), the problem is solved with the package mysql-workbench 6.2.3+dfsg-6 available since today.

I would use a duplex stream instead. like documented here nodejs doc duplex streams

A Transform stream is a Duplex stream where the output is computed in some way from the input.

Define your own parse format string to use.

string formatString = "yyyyMMddHHmmss";
string sample = "20100611221912";
DateTime dt = DateTime.ParseExact(sample,formatString,null);

In case you got a datetime having milliseconds, use the following formatString

string format = "yyyyMMddHHmmssfff"
string dateTime = "20140123205803252";
DateTime.ParseExact(dateTime ,format,CultureInfo.InvariantCulture);

Thanks

You can also try the randomcoloR package:

library(randomcoloR)
n <- 20
palette <- distinctColorPalette(n)

You can see that a set of highly distinct colors are chosen when visualizing in a pie chart (as suggested by other answers here):

pie(rep(1, n), col=palette)

Shown in a pie chart with 50 colors:

n <- 50
palette <- distinctColorPalette(n)
pie(rep(1, n), col=palette)

These are the main factors involved:

1. member variable (default OK)
2. static variable (default OK)
3. final member variable (not initialized, must set on constructor)
4. final static variable (not initialized, must set on a static block {})
5. local variable (not initialized)

Note 1: you must initialize final member variables on every implemented constructor!

Note 2: you must initialize final member variables inside the block of the constructor itself, not calling another method that initializes them. For instance, this is not valid:

private final int memberVar;

public Foo() {
    // Invalid initialization of a final member
    init();
}

private void init() {
    memberVar = 10;
}

Note 3: arrays are Objects in Java, even if they store primitives.

Note 4: when you initialize an array, all of its items are set to default, independently of being a member or a local array.

I am attaching a code example, presenting the aforementioned cases:

public class Foo {
    // Static and member variables are initialized to default values

    // Primitives
    private int a; // Default 0
    private static int b; // Default 0

    // Objects
    private Object c; // Default NULL
    private static Object d; // Default NULL

    // Arrays (note: they are objects too, even if they store primitives)
    private int[] e; // Default NULL
    private static int[] f; // Default NULL

    // What if declared as final?

    // Primitives
    private final int g; // Not initialized. MUST set in the constructor
    private final static int h; // Not initialized. MUST set in a static {}

    // Objects
    private final Object i; // Not initialized. MUST set in constructor
    private final static Object j; // Not initialized. MUST set in a static {}

    // Arrays
    private final int[] k; // Not initialized. MUST set in constructor
    private final static int[] l; // Not initialized. MUST set in a static {}

    // Initialize final statics
    static {
        h = 5;
        j = new Object();
        l = new int[5]; // Elements of l are initialized to 0
    }

    // Initialize final member variables
    public Foo() {
        g = 10;
        i = new Object();
        k = new int[10]; // Elements of k are initialized to 0
    }

    // A second example constructor
    // You have to initialize final member variables to every constructor!
    public Foo(boolean aBoolean) {
        g = 15;
        i = new Object();
        k = new int[15]; // Elements of k are initialized to 0
    }

    public static void main(String[] args) {
        // Local variables are not initialized
        int m; // Not initialized
        Object n; // Not initialized
        int[] o; // Not initialized

        // We must initialize them before use
        m = 20;
        n = new Object();
        o = new int[20]; // Elements of o are initialized to 0
    }
}

The main difference between name() and toString() is that name() is a final method, so it cannot be overridden. The toString() method returns the same value that name() does by default, but toString() can be overridden by subclasses of Enum.

Therefore, if you need the name of the field itself, use name(). If you need a string representation of the value of the field, use toString().

For instance:

public enum WeekDay {
    MONDAY, TUESDAY, WEDNESDAY, THURSDAY, FRIDAY;

    public String toString() {
        return name().charAt(0) + name().substring(1).toLowerCase();
    }
}

In this example, WeekDay.MONDAY.name() returns "MONDAY", and WeekDay.MONDAY.toString() returns "Monday".

WeekDay.valueOf(WeekDay.MONDAY.name()) returns WeekDay.MONDAY, but WeekDay.valueOf(WeekDay.MONDAY.toString()) throws an IllegalArgumentException.

If you're really bent upon converting Integer to String value, I suggest use String.valueOf(YourIntegerVariable). More details can be found at: http://www.tutorialspoint.com/java/java_string_valueof.htm

Sub SelectAllCellsInSheet(SheetName As String)
    lastCol = Sheets(SheetName).Range("a1").End(xlToRight).Column
    Lastrow = Sheets(SheetName).Cells(1, 1).End(xlDown).Row
    Sheets(SheetName).Range("A2", Sheets(SheetName).Cells(Lastrow, lastCol)).Select
End Sub

To use with ActiveSheet:

Call SelectAllCellsInSheet(ActiveSheet.Name)

I suspect it's just following the Linux / Unix standard for returning 0 on success.

Does it really say "1" is false and "0" is true?

You need to create a service to be able to share data between controllers.

app.factory('myService', function() {
 var savedData = {}
 function set(data) {
   savedData = data;
 }
 function get() {
  return savedData;
 }

 return {
  set: set,
  get: get
 }

});

In your controller A:

myService.set(yourSharedData);

In your controller B:

$scope.desiredLocation = myService.get();

Remember to inject myService in the controllers by passing it as a parameter.

For an external (cross-site) solution, you can use: Get contents of a link tag with JavaScript - not CSS

It uses $.ajax() function, so it includes jquery.

You can remove extra space inside DIv by using below property of CSS in a parent (container) div element

display:inline-flex

Before Adding dislay:inline-flex;

After Adding display:inline-flex; in css

Your other options include:

• SimplePie
• Last RSS
• PHP Universal Feed Parser

If you want to use [formGroup] with formControlName, you must replace name attribute with formControlNameformControlName.

Example:

This does not work because it uses the [formGroup] and name attribute.

<div [formGroup]="myGroup">
   <input name="firstName" [(ngModel)]="firstName">
</div>

You should replace the name attribute by formControlName and it will work fine like this following:

<div [formGroup]="myGroup">
   <input formControlName="firstName" [(ngModel)]="firstName">
</div>

var string = "Hello";
var str = string.substring(0, string.length-1);
alert(str);

http://jsfiddle.net/d72ML/

Use filter:

newlist=filter(lambda x: len(x)>0, oldlist) 

The drawbacks of using filter as pointed out is that it is slower than alternatives; also, lambda is usually costly.

Or you can go for the simplest and the most iterative of all:

# I am assuming listtext is the original list containing (possibly) empty items
for item in listtext:
    if item:
        newlist.append(str(item))
# You can remove str() based on the content of your original list

this is the most intuitive of the methods and does it in decent time.

import io, pygame, zipfile
archive = zipfile.ZipFile('images.zip', 'r')

# read bytes from archive
img_data = archive.read('img_01.png')

# create a pygame-compatible file-like object from the bytes
bytes_io = io.BytesIO(img_data)

img = pygame.image.load(bytes_io)

I was trying to figure this out for myself just now and thought this might be useful for anyone who comes across this question in the future.

Don't do

print("\n")

on the last line. It will give you 2 empty lines.

perhaps, you can first determine if the DOM does really exists,

function walkmydog() {
    //when the user starts entering
    var dom = document.getElementById('WallSearch');
    if(dom == null){
        alert('sorry, WallSearch DOM cannot be found');
        return false;    
    }

    if(dom.value.length == 0){
        alert("nothing");
    }
}

if (document.addEventListener){
    document.addEventListener("DOMContentLoaded", walkmydog, false);
}

If you want TextView in the center of parent..
Your main layout is Constraint Layout

<androidx.appcompat.widget.AppCompatTextView
     android:layout_width="0dp"
     android:layout_height="wrap_content"
     android:text="@string/logout"
     app:layout_constraintLeft_toLeftOf="parent"
     app:layout_constraintRight_toRightOf="parent"
     android:gravity="center">
</androidx.appcompat.widget.AppCompatTextView>

it works for me Swift 3:

    func gestureRecognizer(_ gestureRecognizer: UIGestureRecognizer, shouldBeRequiredToFailBy otherGestureRecognizer: UIGestureRecognizer) -> Bool {
        return true
    }

and in ViewDidLoad:

    self.navigationController?.interactivePopGestureRecognizer?.delegate = self
    self.navigationController?.interactivePopGestureRecognizer?.isEnabled = true

You don't need to change the delimiter to display the right part of the string with cut.

The -f switch of the cut command is the n-TH element separated by your delimiter : :, so you can just type :

 grep puddle2_1557936 | cut -d ":" -f2

Another solutions (adapt it a bit) if you want fun :

Using grep :

grep -oP 'puddle2_1557936:\K.*' <<< 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'                                                                        
/home/rogers.williams/folderz/puddle2

or still with look around regex

grep -oP '(?<=puddle2_1557936:).*' <<< 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'                                                                    
/home/rogers.williams/folderz/puddle2

or with perl :

perl -lne '/puddle2_1557936:(.*)/ and print $1' <<< 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'                                                      
/home/rogers.williams/folderz/puddle2

or using ruby (thanks to glenn jackman)

ruby -F: -ane '/puddle2_1557936/ and puts $F[1]' <<< 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'
/home/rogers.williams/folderz/puddle2

or with awk :

awk -F'puddle2_1557936:' '{print $2}'  <<< 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'
/home/rogers.williams/folderz/puddle2

or with python :

python -c 'import sys; print(sys.argv[1].split("puddle2_1557936:")[1])' 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'
/home/rogers.williams/folderz/puddle2

or using only bash :

IFS=: read _ a <<< "puddle2_1557936:/home/rogers.williams/folderz/puddle2"
echo "$a"
/home/rogers.williams/folderz/puddle2

or using js in a shell :

js<<EOF
var x = 'puddle2_1557936:/home/rogers.williams/folderz/puddle2'
print(x.substr(x.indexOf(":")+1))
EOF
/home/rogers.williams/folderz/puddle2

or using php in a shell :

php -r 'preg_match("/puddle2_1557936:(.*)/", $argv[1], $m); echo "$m[1]\n";' 'puddle2_1557936:/home/rogers.williams/folderz/puddle2' 
/home/rogers.williams/folderz/puddle2

A really simple way to suppress the warning is to add a property in the .csproj file:

<Project>
    <PropertyGroup>
        ...     
        <!--disable missing comment warning-->
        <NoWarn>$(NoWarn);1591</NoWarn>
    </PropertyGroup>
...

You need to wait until the image is loaded before you draw it. Try this instead:

var canvas = document.getElementById('viewport'),
context = canvas.getContext('2d');

make_base();

function make_base()
{
  base_image = new Image();
  base_image.src = 'img/base.png';
  base_image.onload = function(){
    context.drawImage(base_image, 0, 0);
  }
}

i.e. draw the image in the onload callback of the image.

Iterating over a dictionary object itself actually gives you an iterator over its keys. Python is trying to unpack keys, which you get from m.type + m.purity into (m, k).

My crystal ball says m.type and m.purity are both strings, so your keys are also strings. Strings are iterable, so they can be unpacked; but iterating over the string gives you an iterator over its characters. So whenever m.type + m.purity is more than two characters long, you have too many values to unpack. (And whenever it's shorter, you have too few values to unpack.)

To fix this, you can iterate explicitly over the items of the dict, which are the (key, value) pairs that you seem to be expecting. But if you only want the values, then just use the values.

(In 2.x, itervalues, iterkeys, and iteritems are typically a better idea; the non-iter versions create a new list object containing the values/keys/items. For large dictionaries and trivial tasks within the iteration, this can be a lot slower than the iter versions which just set up an iterator.)

You can use:

@Override
public void onDestroy() {
    super.onDestroy();

    if (mServiceConn != null) {
        unbindService(mServiceConn);
    }
}

You should chain the replace() together instead of assigning the result and replacing again.

var strMessage1 = document.getElementById("element1") ;
strMessage1.innerHTML = strMessage1.innerHTML
                        .replace(/aaaaaa./g,'<a href=\"http://www.google.com/')
                        .replace(/.bbbbbb/g,'/world\">Helloworld</a>');

See DEMO.

I followed the thread and tired all things but didn't work. Finally I saw that my eclipse shortcut target is like below

C:\Eclipse_3.6\eclipse\eclipse.exe -clean -data "C:\workplace" ...

I simply removed -data option and it worked. Now I got popup to choose workspace at startup.

cheers.

I don't think is a good practice to invade the GLOBAL space from modules, but in scenarios where could be strictly necessary to implement it:

Object.defineProperty(global,'MYCONSTANT',{value:'foo',writable:false,configurable:false});

It has to be considered the impact of this resource. Without proper naming of those constants, the risk of OVERWRITTING already defined global variables, is something real.

How about disabled=disabled:

<input id="price_from" value="price from " disabled="disabled">????????????

Problem is if you don't want user to edit them, why display them in input? You can hide them even if you want to submit a form. And to display information, just use other tag instead.

MySQL create function syntax:

DELIMITER //

CREATE FUNCTION GETFULLNAME(fname CHAR(250),lname CHAR(250))
    RETURNS CHAR(250)
    BEGIN
        DECLARE fullname CHAR(250);
        SET fullname=CONCAT(fname,' ',lname);
        RETURN fullname;
    END //

DELIMITER ;

Use This Function In Your Query

SELECT a.*,GETFULLNAME(a.fname,a.lname) FROM namedbtbl as a


SELECT GETFULLNAME("Biswarup","Adhikari") as myname;

Watch this Video how to create mysql function and how to use in your query

Create Mysql Function Video Tutorial

You can change this one parent attribute ="android:style/Theme.Holo.Light.DarkActionBar"

Although this is an old thread, here are two examples for solving the problem in Java8.

sorting by the first column ([][0]):

double[][] myArr = new double[mySize][2];
// ...
java.util.Arrays.sort(myArr, java.util.Comparator.comparingDouble(a -> a[0]));

sorting by the first two columns ([][0], [][1]):

double[][] myArr = new double[mySize][2];
// ...
java.util.Arrays.sort(myArr, java.util.Comparator.<double[]>comparingDouble(a -> a[0]).thenComparingDouble(a -> a[1]));

If you do not need more than strings, you can use com.google.common.io.Files

Files.simplifyPath("some/prefix/with//extra///slashes" + "file//name")

to get

"some/prefix/with/extra/slashes/file/name"

In PL/SQL v.10

keyword declare is used to declare variable

DECLARE stupidvar varchar(20);

to assign a value you can set it when you declare

DECLARE stupidvar varchar(20) := '12345678';

or to select something into that variable you use INTO statement, however you need to wrap statement in BEGIN and END, also you need to make sure that only single value is returned, and don't forget semicolons.

so the full statement would come out following:

DECLARE stupidvar varchar(20);
BEGIN
    SELECT stupid into stupidvar FROM stupiddata CC 
    WHERE stupidid = 2;
END;

Your variable is only usable within BEGIN and END so if you want to use more than one you will have to do multiple BEGIN END wrappings

DECLARE stupidvar varchar(20);
BEGIN
    SELECT stupid into stupidvar FROM stupiddata CC 
    WHERE stupidid = 2;

    DECLARE evenmorestupidvar varchar(20);
    BEGIN
        SELECT evenmorestupid into evenmorestupidvar FROM evenmorestupiddata CCC 
        WHERE evenmorestupidid = 42;

        INSERT INTO newstupiddata (newstupidcolumn, newevenmorestupidstupidcolumn)
        SELECT stupidvar, evenmorestupidvar 
        FROM dual

    END;
END;

Hope this saves you some time

Based on @Vlad Bezden answer I use this slightly modified code because I prefer named placeholders:

String.prototype.format = function(placeholders) {
    var s = this;
    for(var propertyName in placeholders) {
        var re = new RegExp('{' + propertyName + '}', 'gm');
        s = s.replace(re, placeholders[propertyName]);
    }    
    return s;
};

usage:

"{greeting} {who}!".format({greeting: "Hello", who: "world"})

String.prototype.format = function(placeholders) {_x000D_
    var s = this;_x000D_
    for(var propertyName in placeholders) {_x000D_
        var re = new RegExp('{' + propertyName + '}', 'gm');_x000D_
        s = s.replace(re, placeholders[propertyName]);_x000D_
    }    _x000D_
    return s;_x000D_
};_x000D_
_x000D_
$("#result").text("{greeting} {who}!".format({greeting: "Hello", who: "world"}));

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<div id="result"></div>

1. find($id) takes an id and returns a single model. If no matching model exist, it returns null.

2. findOrFail($id) takes an id and returns a single model. If no matching model exist, it throws an error¹.

3. first() returns the first record found in the database. If no matching model exist, it returns null.

4. firstOrFail() returns the first record found in the database. If no matching model exist, it throws an error¹.

5. get() returns a collection of models matching the query.

6. pluck($column) returns a collection of just the values in the given column. In previous versions of Laravel this method was called lists.

7. toArray() converts the model/collection into a simple PHP array.

Note: a collection is a beefed up array. It functions similarly to an array, but has a lot of added functionality, as you can see in the docs.

Unfortunately, PHP doesn't let you use a collection object everywhere you can use an array. For example, using a collection in a foreach loop is ok, put passing it to array_map is not. Similarly, if you type-hint an argument as array, PHP won't let you pass it a collection. Starting in PHP 7.1, there is the iterable typehint, which can be used to accept both arrays and collections.

If you ever want to get a plain array from a collection, call its all() method.

¹ The error thrown by the findOrFail and firstOrFail methods is a ModelNotFoundException. If you don't catch this exception yourself, Laravel will respond with a 404, which is what you want most of the time.

Here is your solution for the problem,

$letter = array();
for ($i = 'A'; $i !== 'ZZ'; $i++){
        if(ord($i) % 2 != 0)
           $letter[] .= $i;
}
print_r($letter);

You need to get the ASCII value for that character which will solve your problem.

Here is ord doc and working code.

For your requirement, you can do like this,

for ($i = 'A'; $i !== 'ZZ'; ord($i)+$x){
  $letter[] .= $i;
}
print_r($letter);

Here set $x as per your requirement.

Someone should mention that in the question there is a little trap. #ifdef will only check if the following symbol has been defined via #define or by command line, but its value (its substitution in fact) is irrelevant. You could even write

#define one

precompilers accept that. But if you use #if it's another thing.

#define one 0
#if one
    printf("one evaluates to a truth ");
#endif
#if !one
    printf("one does not evaluate to truth ");
#endif

will give one does not evaluate to truth. The keyword defined allows to get the desired behaviour.

#if defined(one) 

is therefore equivalent to #ifdef

The advantage of the #if construct is to allow a better handling of code paths, try to do something like that with the old #ifdef/#ifndef pair.

#if defined(ORA_PROC) || defined(__GNUC) && __GNUC_VERSION > 300

You can even add the size of the terms (indexed terms). Have a look at Elastic Search: how to see the indexed data

I dont program in C# but in C, we solve the same problem by making the socket non-blocking and then putting the fd in a select/poll loop with a timeout value equal to the amount of time we are willing to wait for the connect to succeed.

I found this for Visual C++ and the explanation there also bends towards the select/poll mechanism I explained before.

In my experience, you cannot change connect timeout values per socket. You change it for all (by tuning OS parameters).

Python 3.9 adds the zoneinfo module so now only the the standard library is needed!

>>> from zoneinfo import ZoneInfo
>>> from datetime import datetime

>>> d = datetime(2020, 10, 31, 12, tzinfo=ZoneInfo('America/Los_Angeles'))
>>> d.astimezone(ZoneInfo('Europe/Berlin'))  # 12:00 in Cali will be 20:00 in Berlin
datetime.datetime(2020, 10, 31, 20, 0, tzinfo=zoneinfo.ZoneInfo(key='Europe/Berlin'))

Wikipedia list of available time zones

Some functions such as now() and utcnow() return timezone-unaware datetimes, meaning they contain no timezone information. I recommend only requesting timezone-aware values from them using the keyword tz=ZoneInfo('localtime').

If astimezone gets a timezone-unaware input, it will assume it is local time, which can lead to errors:

>>> datetime.utcnow()  # UTC -- NOT timezone-aware!!
datetime.datetime(2020, 6, 1, 22, 39, 57, 376479)
>>> datetime.now()     # Local time -- NOT timezone-aware!!
datetime.datetime(2020, 6, 2, 0, 39, 57, 376675)

>>> datetime.now(tz=ZoneInfo('localtime'))  # timezone-aware
datetime.datetime(2020, 6, 2, 0, 39, 57, 376806, tzinfo=zoneinfo.ZoneInfo(key='localtime'))
>>> datetime.now(tz=ZoneInfo('Europe/Berlin'))  # timezone-aware
datetime.datetime(2020, 6, 2, 0, 39, 57, 376937, tzinfo=zoneinfo.ZoneInfo(key='Europe/Berlin'))
>>> datetime.utcnow().astimezone(ZoneInfo('Europe/Berlin'))  # WRONG!!
datetime.datetime(2020, 6, 1, 22, 39, 57, 377562, tzinfo=zoneinfo.ZoneInfo(key='Europe/Berlin'))

Windows has no system time zone database, so here an extra package is needed:

pip install tzdata  

There is a backport to allow use in Python 3.6 to 3.8:

sudo pip install backports.zoneinfo

Then:

from backports.zoneinfo import ZoneInfo

If you are using postgresql then you have to use column type BOOLEAN in lower case as boolean.

ALTER TABLE users ADD "priv_user" boolean DEFAULT false;

var myContent = '<div id="test">Hello <span>world!</span></div>';

alert($(myContent).text());

That results in hello world. Does that answer your question?

http://jsfiddle.net/D2tEf/ for an example

When you return value from server to jQuery's Ajax call you can also use the below code to indicate a server error:

return StatusCode(500, "My error");

Or

return StatusCode((int)HttpStatusCode.InternalServerError, "My error");

Or

Response.StatusCode = (int)HttpStatusCode.InternalServerError;
return Json(new { responseText = "my error" });

Codes other than Http Success codes (e.g. 200[OK]) will trigger the function in front of error: in client side (ajax).

you can have ajax call like:

$.ajax({
        type: "POST",
        url: "/General/ContactRequestPartial",
        data: {
            HashId: id
        },
       success: function (response)  {
            console.log("Custom message : " + response.responseText);
        }, //Is Called when Status Code is 200[OK] or other Http success code
        error: function (jqXHR, textStatus, errorThrown)  {
            console.log("Custom error : " + jqXHR.responseText + " Status: " + textStatus + " Http error:" + errorThrown);
        }, //Is Called when Status Code is 500[InternalServerError] or other Http Error code
        })

Additionally you can handle different HTTP errors from jQuery side like:

$.ajax({
        type: "POST",
        url: "/General/ContactRequestPartial",
        data: {
            HashId: id
        },
        statusCode: {
            500: function (jqXHR, textStatus, errorThrown)  {
                console.log("Custom error : " + jqXHR.responseText + " Status: " + textStatus + " Http error:" + errorThrown);
            501: function (jqXHR, textStatus, errorThrown)  {
                console.log("Custom error : " + jqXHR.responseText + " Status: " + textStatus + " Http error:" + errorThrown);
            }
        })

statusCode: is useful when you want to call different functions for different status codes that you return from server.

You can see list of different Http Status codes here:Wikipedia

Additional resources:

1. Returning Server-Side Errors from AJAX Calls
2. Returning a JsonResult within the Error function of JQuery Ajax
3. Handling Ajax errors with jQuery

Everybody is using at least Java 7 now, right? Here is the answer to the original problem:

String myString = getFruitString();

switch (myString) {

    case "apple":
        method1();
        break;

    case "carrot":
        method2();
        break;

    case "mango":
        method3();
        break;

    case "orange":
        method4();
        break;
}

Notes

• The case statements are equivalent to using String.equals.
• As usual, String matching is case sensitive.
• According to the docs, this is generally faster than using chained if-else statements (as in cHao's answer).

Should we include a little JS? Because CSS was not basically created for this job. CSS was just a style sheet to add styles to the HTML, but its pseudo classes can do something that the basic CSS can't do. For example button:active active is pseudo.

Reference:

http://css-tricks.com/pseudo-class-selectors/ You can learn more about pseudo here!

Your code:

The code that you're having the basic but helpfull. And yes :active will only occur once the click event is triggered.

button {
font-size: 18px;
border: 2px solid gray;
border-radius: 100px;
width: 100px;
height: 100px;
}

button:active {
font-size: 18px;
border: 2px solid red;
border-radius: 100px;
width: 100px;
height: 100px;
}

This is what CSS would do, what rlemon suggested is good, but that would as he suggested would require a tag.

How to use CSS:

You can use :focus too. :focus would work once the click is made and would stay untill you click somewhere else, this was the CSS, you were trying to use CSS, so use :focus to make the buttons change.

What JS would do:

The JavaScript's jQuery library is going to help us for this code. Here is the example:

$('button').click(function () {
  $(this).css('border', '1px solid red');
}

This will make sure that the button stays red even if the click gets out. To change the focus type (to change the color of red to other) you can use this:

$('button').click(function () {
  $(this).css('border', '1px solid red');
  // find any other button with a specific id, and change it back to white like
  $('button#red').css('border', '1px solid white');
}

This way, you will create a navigation menu. Which will automatically change the color of the tabs as you click on them. :)

Hope you get the answer. Good luck! Cheers.

Perhaps consider using a preprocessor macro definition instead:

#define UPDATE_ID(instance, id)  ({ (instance)->id= (id); })
#define UPDATE_ROUTE(instance, route)  ({ (instance)->route = (route); })
#define UPDATE_BACKUP_ROUTE(instance, route)  ({ (instance)->backup_route = (route); })
#define UPDATE_CURRENT_ROUTE(instance, route)  ({ (instance)->current_route = (route); })

If your instance of (struct foo) is global, then you don't need the parameter for that of course. But I'm assuming you probably have more than one instance. Using the ({ ... }) block is a GNU-ism that that applies to GCC; it is a nice (safe) way to keep lines together as a block. If you later need to add more to the macros, such as range validation checking, you won't have to worry about breaking things like if/else statements and so forth.

This is what I would do, based upon the requirements you indicated. Situations like this are one of the reasons that I started using python a lot; handling default parameters and such becomes a lot simpler than it ever is with C. (I guess that's a python plug, sorry ;-)

first, get the container id of the desired container by

docker ps

you will get something like this:

CONTAINER ID        IMAGE                  COMMAND             CREATED             STATUS                          PORTS                    NAMES
3ac548b6b315        frontend_react-web     "npm run start"     48 seconds ago      Up 47 seconds                   0.0.0.0:3000->3000/tcp   frontend_react-web_1

now copy this container id and run the following command:

docker exec -it container_id sh

docker exec -it 3ac548b6b315 sh

Identifiers (including column names) that are not double-quoted are folded to lower case in PostgreSQL. Column names that were created with double-quotes and thereby retained upper-case letters (and/or other syntax violations) have to be double-quoted for the rest of their life:

"first_Name"

Values (string literals / constants) are enclosed in single quotes:

'xyz'

So, yes, PostgreSQL column names are case-sensitive (when double-quoted):

SELECT * FROM persons WHERE "first_Name" = 'xyz';

Read the manual on identifiers here.

My standing advice is to use legal, lower-case names exclusively so double-quoting is not needed.

var map;
var infowindow;
...
function createMarker(...) {
    var marker = new google.maps.Marker({...});
    google.maps.event.addListener(marker, 'click', function() {
        ...
        if (infowindow) {
            infowindow.close();
        };
        infowindow = new google.maps.InfoWindow({
            content: contentString,
            maxWidth: 300
        });
        infowindow.open(map, marker);
    }
...
function initialize() {
    ...
    map = new google.maps.Map(document.getElementById("map_canvas"), myOptions);
    ...
    google.maps.event.addListener(map, 'click', function(event) {
        if (infowindow) {
            infowindow.close();
        };
        ...
    }
}

On Mac:

?+CTRL+g

However, you can reset any key any way you'd like using "Customize your Sublime Text 2 configuration for awesome coding." for Mac.

On Windows/Linux:

Alt+F3

If anyone has how-tos or articles on this, I'd be more than happy to update.

Yes, you can use jQuery to make this done, the idea is

Use a hidden value in your form, and copy the value from external text box to this hidden value just before submitting the form.

<form name="input" action="handle_email.php" method="post">
  <input type="hidden" name="email" id="email" />
  <input type="submit" value="Submit" />
</form> 

<script>
   $("form").submit(function() {
     var emailFromOtherTextBox = $("#email_textbox").val();
     $("#email").val(emailFromOtherTextBox ); 
     return true;
  });
</script>

also see http://api.jquery.com/submit/

bool (*FuncPtr)()

FuncPtr = A;
FuncPtr();

If you want to call one of those functions conditionally, you should consider using an array of function pointers. In this case you'd have 3 elements pointing to A, B, and C and you call one depending on the index to the array, such as funcArray0 for A.

Yes, you can use what's known as :nth-child selectors.

In this case you would use:

li:nth-child(3n) {
// Styling for every third element here.
}

:nth-child(3n):

3(0) = 0
3(1) = 3
3(2) = 6
3(3) = 9
3(4) = 12

:nth-child() is compatible in Chrome, Firefox, and IE9+.

For a work around to use :nth-child() amongst other pseudo-classes/attribute selectors in IE6 through to IE8, see this link.

That should work. Better if you pass a function to val:

$('#replyBox').val(function(i, text) {
    return text + quote;
});

This way you avoid searching the element and calling val twice.

As detailed above, the generic List<> is the best way of doing it.

If you're stuck in .NET 1.*, then you will have to use the ArrayList class instead. This does not have compile-time type checking and you also have to add casting - messy.

Successive versions have also implemented various variations - including thread safe variants.

Use CSS attribute selectors:

https://developer.mozilla.org/en-US/docs/CSS/Attribute_selectors

e.g.:

div[role=main]

Working with a dictionary ->level2 above comes from a dictionary in my case (just in case anybody will find it useful) Trying the first example I stumbled over this error: "This document already has a 'DocumentElement' node." I was inspired by the answer here

and edited my code: (xmlDoc.DocumentElement.AppendChild(body))

//a dictionary:
Dictionary<string, string> Level2Data 
{
    {"level2", "text"},
    {"level2", "other text"},
    {"same_level2", "more text"}
}
//xml Decalration:
XmlDocument xmlDoc = new XmlDocument();
XmlDeclaration xmlDeclaration = xmlDoc.CreateXmlDeclaration("1.0", "UTF-8", null);
XmlElement root = xmlDoc.DocumentElement;
xmlDoc.InsertBefore(xmlDeclaration, root);
// add body
XmlElement body = xmlDoc.CreateElement(string.Empty, "body", string.Empty);
xmlDoc.AppendChild(body);
XmlElement body = xmlDoc.CreateElement(string.Empty, "body", string.Empty);
xmlDoc.DocumentElement.AppendChild(body); //without DocumentElement ->ERR



foreach (KeyValuePair<string, string> entry in Level2Data)
{
    //write to xml: - it works version 1.
    XmlNode keyNode = xmlDoc.CreateElement(entry.Key); //open TAB
    keyNode.InnerText = entry.Value;
    body.AppendChild(keyNode); //close TAB

    //Write to xmml verdion 2: (uncomment the next 4 lines and comment the above 3 - version 1
    //XmlElement key = xmlDoc.CreateElement(string.Empty, entry.Key, string.Empty);
    //XmlText value = xmlDoc.CreateTextNode(entry.Value);
    //key.AppendChild(value);
    //body.AppendChild(key);
}

Both versions (1 and 2 inside foreach loop) give the output:

<?xml version="1.0" encoding="UTF-8"?>
<body>
    <level1>
        <level2>text</level2>
        <level2>ther text</level2>
         <same_level2>more text</same_level2>
    </level1>
</body>

(Note: third line "same level2" in dictionary can be also level2 as the others but I wanted to ilustrate the advantage of the dictionary - in my case I needed level2 with different names.

Assuming this is for a C# project and assuming that you want to change the default namespace, you need to go to Project Properties, Application tab, and specify "Default Namespace".

Default namespace is the namespace that Visual studio sets when you create a new class. Next time you do Right Click > Add > Class it would use the namespace you specified in the above step.

What you need to do is this:

int[] list1 = new int[4] { 1, 2, 3, 4};
int[] list2 = new int[4] { 5, 6, 7, 8};
int[] list3 = new int[4] { 1, 3, 2, 1 };
int[] list4 = new int[4] { 5, 4, 3, 2 };

int[][] lists = new int[][] {  list1 ,  list2 ,  list3 ,  list4  };

Another alternative would be to create a List<int[]> type:

List<int[]> data=new List<int[]>(){list1,list2,list3,list4};

vim-autoformat formats your source files using external programs specific for your language, e.g. the "rbeautify" gem for Ruby files, "js-beautify" npm package for JavaScript.

begin   
   dbms_output.put_line( 'hello' ||chr(13) || chr(10) || 'world' );
end;

There is another answer here that also fits the authors request: 'compile-time' way to get all property names defined interface

If you use the plugin ts-transformer-keys and an Interface to your class you can get all the keys for the class.

But if you're using Angular or React then in some scenarios there is additional configuration necessary (webpack and typescript) to get it working: https://github.com/kimamula/ts-transformer-keys/issues/4

As a few others already mentioned, you can catch certain errors using the service client (service_client.exceptions.<ExceptionClass>) or resource (service_resource.meta.client.exceptions.<ExceptionClass>), however it is not well documented (also which exceptions belong to which clients). So here is how to get the complete mapping at time of writing (January 2020) in region EU (Ireland) (eu-west-1):

import boto3, pprint

region_name = 'eu-west-1'
session = boto3.Session(region_name=region_name)
exceptions = {
  service: list(boto3.client('sts').exceptions._code_to_exception)
  for service in session.get_available_services()
}
pprint.pprint(exceptions, width=20000)

Here is a subset of the pretty large document:

{'acm': ['InvalidArnException', 'InvalidDomainValidationOptionsException', 'InvalidStateException', 'InvalidTagException', 'LimitExceededException', 'RequestInProgressException', 'ResourceInUseException', 'ResourceNotFoundException', 'TooManyTagsException'],
 'apigateway': ['BadRequestException', 'ConflictException', 'LimitExceededException', 'NotFoundException', 'ServiceUnavailableException', 'TooManyRequestsException', 'UnauthorizedException'],
 'athena': ['InternalServerException', 'InvalidRequestException', 'TooManyRequestsException'],
 'autoscaling': ['AlreadyExists', 'InvalidNextToken', 'LimitExceeded', 'ResourceContention', 'ResourceInUse', 'ScalingActivityInProgress', 'ServiceLinkedRoleFailure'],
 'cloudformation': ['AlreadyExistsException', 'ChangeSetNotFound', 'CreatedButModifiedException', 'InsufficientCapabilitiesException', 'InvalidChangeSetStatus', 'InvalidOperationException', 'LimitExceededException', 'NameAlreadyExistsException', 'OperationIdAlreadyExistsException', 'OperationInProgressException', 'OperationNotFoundException', 'StackInstanceNotFoundException', 'StackSetNotEmptyException', 'StackSetNotFoundException', 'StaleRequestException', 'TokenAlreadyExistsException'],
 'cloudfront': ['AccessDenied', 'BatchTooLarge', 'CNAMEAlreadyExists', 'CannotChangeImmutablePublicKeyFields', 'CloudFrontOriginAccessIdentityAlreadyExists', 'CloudFrontOriginAccessIdentityInUse', 'DistributionAlreadyExists', 'DistributionNotDisabled', 'FieldLevelEncryptionConfigAlreadyExists', 'FieldLevelEncryptionConfigInUse', 'FieldLevelEncryptionProfileAlreadyExists', 'FieldLevelEncryptionProfileInUse', 'FieldLevelEncryptionProfileSizeExceeded', 'IllegalFieldLevelEncryptionConfigAssociationWithCacheBehavior', 'IllegalUpdate', 'InconsistentQuantities', 'InvalidArgument', 'InvalidDefaultRootObject', 'InvalidErrorCode', 'InvalidForwardCookies', 'InvalidGeoRestrictionParameter', 'InvalidHeadersForS3Origin', 'InvalidIfMatchVersion', 'InvalidLambdaFunctionAssociation', 'InvalidLocationCode', 'InvalidMinimumProtocolVersion', 'InvalidOrigin', 'InvalidOriginAccessIdentity', 'InvalidOriginKeepaliveTimeout', 'InvalidOriginReadTimeout', 'InvalidProtocolSettings', 'InvalidQueryStringParameters', 'InvalidRelativePath', 'InvalidRequiredProtocol', 'InvalidResponseCode', 'InvalidTTLOrder', 'InvalidTagging', 'InvalidViewerCertificate', 'InvalidWebACLId', 'MissingBody', 'NoSuchCloudFrontOriginAccessIdentity', 'NoSuchDistribution', 'NoSuchFieldLevelEncryptionConfig', 'NoSuchFieldLevelEncryptionProfile', 'NoSuchInvalidation', 'NoSuchOrigin', 'NoSuchPublicKey', 'NoSuchResource', 'NoSuchStreamingDistribution', 'PreconditionFailed', 'PublicKeyAlreadyExists', 'PublicKeyInUse', 'QueryArgProfileEmpty', 'StreamingDistributionAlreadyExists', 'StreamingDistributionNotDisabled', 'TooManyCacheBehaviors', 'TooManyCertificates', 'TooManyCloudFrontOriginAccessIdentities', 'TooManyCookieNamesInWhiteList', 'TooManyDistributionCNAMEs', 'TooManyDistributions', 'TooManyDistributionsAssociatedToFieldLevelEncryptionConfig', 'TooManyDistributionsWithLambdaAssociations', 'TooManyFieldLevelEncryptionConfigs', 'TooManyFieldLevelEncryptionContentTypeProfiles', 'TooManyFieldLevelEncryptionEncryptionEntities', 'TooManyFieldLevelEncryptionFieldPatterns', 'TooManyFieldLevelEncryptionProfiles', 'TooManyFieldLevelEncryptionQueryArgProfiles', 'TooManyHeadersInForwardedValues', 'TooManyInvalidationsInProgress', 'TooManyLambdaFunctionAssociations', 'TooManyOriginCustomHeaders', 'TooManyOriginGroupsPerDistribution', 'TooManyOrigins', 'TooManyPublicKeys', 'TooManyQueryStringParameters', 'TooManyStreamingDistributionCNAMEs', 'TooManyStreamingDistributions', 'TooManyTrustedSigners', 'TrustedSignerDoesNotExist'],
 'cloudtrail': ['CloudTrailARNInvalidException', 'CloudTrailAccessNotEnabledException', 'CloudWatchLogsDeliveryUnavailableException', 'InsufficientDependencyServiceAccessPermissionException', 'InsufficientEncryptionPolicyException', 'InsufficientS3BucketPolicyException', 'InsufficientSnsTopicPolicyException', 'InvalidCloudWatchLogsLogGroupArnException', 'InvalidCloudWatchLogsRoleArnException', 'InvalidEventSelectorsException', 'InvalidHomeRegionException', 'InvalidKmsKeyIdException', 'InvalidLookupAttributesException', 'InvalidMaxResultsException', 'InvalidNextTokenException', 'InvalidParameterCombinationException', 'InvalidS3BucketNameException', 'InvalidS3PrefixException', 'InvalidSnsTopicNameException', 'InvalidTagParameterException', 'InvalidTimeRangeException', 'InvalidTokenException', 'InvalidTrailNameException', 'KmsException', 'KmsKeyDisabledException', 'KmsKeyNotFoundException', 'MaximumNumberOfTrailsExceededException', 'NotOrganizationMasterAccountException', 'OperationNotPermittedException', 'OrganizationNotInAllFeaturesModeException', 'OrganizationsNotInUseException', 'ResourceNotFoundException', 'ResourceTypeNotSupportedException', 'S3BucketDoesNotExistException', 'TagsLimitExceededException', 'TrailAlreadyExistsException', 'TrailNotFoundException', 'TrailNotProvidedException', 'UnsupportedOperationException'],
 'cloudwatch': ['InvalidParameterInput', 'ResourceNotFound', 'InternalServiceError', 'InvalidFormat', 'InvalidNextToken', 'InvalidParameterCombination', 'InvalidParameterValue', 'LimitExceeded', 'MissingParameter'],
 'codebuild': ['AccountLimitExceededException', 'InvalidInputException', 'OAuthProviderException', 'ResourceAlreadyExistsException', 'ResourceNotFoundException'],
 'config': ['InsufficientDeliveryPolicyException', 'InsufficientPermissionsException', 'InvalidConfigurationRecorderNameException', 'InvalidDeliveryChannelNameException', 'InvalidLimitException', 'InvalidNextTokenException', 'InvalidParameterValueException', 'InvalidRecordingGroupException', 'InvalidResultTokenException', 'InvalidRoleException', 'InvalidS3KeyPrefixException', 'InvalidSNSTopicARNException', 'InvalidTimeRangeException', 'LastDeliveryChannelDeleteFailedException', 'LimitExceededException', 'MaxNumberOfConfigRulesExceededException', 'MaxNumberOfConfigurationRecordersExceededException', 'MaxNumberOfDeliveryChannelsExceededException', 'MaxNumberOfRetentionConfigurationsExceededException', 'NoAvailableConfigurationRecorderException', 'NoAvailableDeliveryChannelException', 'NoAvailableOrganizationException', 'NoRunningConfigurationRecorderException', 'NoSuchBucketException', 'NoSuchConfigRuleException', 'NoSuchConfigurationAggregatorException', 'NoSuchConfigurationRecorderException', 'NoSuchDeliveryChannelException', 'NoSuchRetentionConfigurationException', 'OrganizationAccessDeniedException', 'OrganizationAllFeaturesNotEnabledException', 'OversizedConfigurationItemException', 'ResourceInUseException', 'ResourceNotDiscoveredException', 'ValidationException'],
 'dynamodb': ['BackupInUseException', 'BackupNotFoundException', 'ConditionalCheckFailedException', 'ContinuousBackupsUnavailableException', 'GlobalTableAlreadyExistsException', 'GlobalTableNotFoundException', 'IdempotentParameterMismatchException', 'IndexNotFoundException', 'InternalServerError', 'InvalidRestoreTimeException', 'ItemCollectionSizeLimitExceededException', 'LimitExceededException', 'PointInTimeRecoveryUnavailableException', 'ProvisionedThroughputExceededException', 'ReplicaAlreadyExistsException', 'ReplicaNotFoundException', 'RequestLimitExceeded', 'ResourceInUseException', 'ResourceNotFoundException', 'TableAlreadyExistsException', 'TableInUseException', 'TableNotFoundException', 'TransactionCanceledException', 'TransactionConflictException', 'TransactionInProgressException'],
 'ec2': [],
 'ecr': ['EmptyUploadException', 'ImageAlreadyExistsException', 'ImageNotFoundException', 'InvalidLayerException', 'InvalidLayerPartException', 'InvalidParameterException', 'InvalidTagParameterException', 'LayerAlreadyExistsException', 'LayerInaccessibleException', 'LayerPartTooSmallException', 'LayersNotFoundException', 'LifecyclePolicyNotFoundException', 'LifecyclePolicyPreviewInProgressException', 'LifecyclePolicyPreviewNotFoundException', 'LimitExceededException', 'RepositoryAlreadyExistsException', 'RepositoryNotEmptyException', 'RepositoryNotFoundException', 'RepositoryPolicyNotFoundException', 'ServerException', 'TooManyTagsException', 'UploadNotFoundException'],
 'ecs': ['AccessDeniedException', 'AttributeLimitExceededException', 'BlockedException', 'ClientException', 'ClusterContainsContainerInstancesException', 'ClusterContainsServicesException', 'ClusterContainsTasksException', 'ClusterNotFoundException', 'InvalidParameterException', 'MissingVersionException', 'NoUpdateAvailableException', 'PlatformTaskDefinitionIncompatibilityException', 'PlatformUnknownException', 'ResourceNotFoundException', 'ServerException', 'ServiceNotActiveException', 'ServiceNotFoundException', 'TargetNotFoundException', 'UnsupportedFeatureException', 'UpdateInProgressException'],
 'efs': ['BadRequest', 'DependencyTimeout', 'FileSystemAlreadyExists', 'FileSystemInUse', 'FileSystemLimitExceeded', 'FileSystemNotFound', 'IncorrectFileSystemLifeCycleState', 'IncorrectMountTargetState', 'InsufficientThroughputCapacity', 'InternalServerError', 'IpAddressInUse', 'MountTargetConflict', 'MountTargetNotFound', 'NetworkInterfaceLimitExceeded', 'NoFreeAddressesInSubnet', 'SecurityGroupLimitExceeded', 'SecurityGroupNotFound', 'SubnetNotFound', 'ThroughputLimitExceeded', 'TooManyRequests', 'UnsupportedAvailabilityZone'],
 'eks': ['ClientException', 'InvalidParameterException', 'InvalidRequestException', 'ResourceInUseException', 'ResourceLimitExceededException', 'ResourceNotFoundException', 'ServerException', 'ServiceUnavailableException', 'UnsupportedAvailabilityZoneException'],
 'elasticache': ['APICallRateForCustomerExceeded', 'AuthorizationAlreadyExists', 'AuthorizationNotFound', 'CacheClusterAlreadyExists', 'CacheClusterNotFound', 'CacheParameterGroupAlreadyExists', 'CacheParameterGroupNotFound', 'CacheParameterGroupQuotaExceeded', 'CacheSecurityGroupAlreadyExists', 'CacheSecurityGroupNotFound', 'QuotaExceeded.CacheSecurityGroup', 'CacheSubnetGroupAlreadyExists', 'CacheSubnetGroupInUse', 'CacheSubnetGroupNotFoundFault', 'CacheSubnetGroupQuotaExceeded', 'CacheSubnetQuotaExceededFault', 'ClusterQuotaForCustomerExceeded', 'InsufficientCacheClusterCapacity', 'InvalidARN', 'InvalidCacheClusterState', 'InvalidCacheParameterGroupState', 'InvalidCacheSecurityGroupState', 'InvalidParameterCombination', 'InvalidParameterValue', 'InvalidReplicationGroupState', 'InvalidSnapshotState', 'InvalidSubnet', 'InvalidVPCNetworkStateFault', 'NoOperationFault', 'NodeGroupNotFoundFault', 'NodeGroupsPerReplicationGroupQuotaExceeded', 'NodeQuotaForClusterExceeded', 'NodeQuotaForCustomerExceeded', 'ReplicationGroupAlreadyExists', 'ReplicationGroupNotFoundFault', 'ReservedCacheNodeAlreadyExists', 'ReservedCacheNodeNotFound', 'ReservedCacheNodeQuotaExceeded', 'ReservedCacheNodesOfferingNotFound', 'ServiceLinkedRoleNotFoundFault', 'SnapshotAlreadyExistsFault', 'SnapshotFeatureNotSupportedFault', 'SnapshotNotFoundFault', 'SnapshotQuotaExceededFault', 'SubnetInUse', 'TagNotFound', 'TagQuotaPerResourceExceeded', 'TestFailoverNotAvailableFault'],
 'elasticbeanstalk': ['CodeBuildNotInServiceRegionException', 'ElasticBeanstalkServiceException', 'InsufficientPrivilegesException', 'InvalidRequestException', 'ManagedActionInvalidStateException', 'OperationInProgressFailure', 'PlatformVersionStillReferencedException', 'ResourceNotFoundException', 'ResourceTypeNotSupportedException', 'S3LocationNotInServiceRegionException', 'S3SubscriptionRequiredException', 'SourceBundleDeletionFailure', 'TooManyApplicationVersionsException', 'TooManyApplicationsException', 'TooManyBucketsException', 'TooManyConfigurationTemplatesException', 'TooManyEnvironmentsException', 'TooManyPlatformsException', 'TooManyTagsException'],
 'elb': ['LoadBalancerNotFound', 'CertificateNotFound', 'DependencyThrottle', 'DuplicateLoadBalancerName', 'DuplicateListener', 'DuplicatePolicyName', 'DuplicateTagKeys', 'InvalidConfigurationRequest', 'InvalidInstance', 'InvalidScheme', 'InvalidSecurityGroup', 'InvalidSubnet', 'ListenerNotFound', 'LoadBalancerAttributeNotFound', 'OperationNotPermitted', 'PolicyNotFound', 'PolicyTypeNotFound', 'SubnetNotFound', 'TooManyLoadBalancers', 'TooManyPolicies', 'TooManyTags', 'UnsupportedProtocol'],
 'emr': ['InternalServerError', 'InternalServerException', 'InvalidRequestException'],
 'es': ['BaseException', 'DisabledOperationException', 'InternalException', 'InvalidTypeException', 'LimitExceededException', 'ResourceAlreadyExistsException', 'ResourceNotFoundException', 'ValidationException'],
 'events': ['ConcurrentModificationException', 'InternalException', 'InvalidEventPatternException', 'LimitExceededException', 'ManagedRuleException', 'PolicyLengthExceededException', 'ResourceNotFoundException'],
 'firehose': ['ConcurrentModificationException', 'InvalidArgumentException', 'LimitExceededException', 'ResourceInUseException', 'ResourceNotFoundException', 'ServiceUnavailableException'],
 'glacier': ['InsufficientCapacityException', 'InvalidParameterValueException', 'LimitExceededException', 'MissingParameterValueException', 'PolicyEnforcedException', 'RequestTimeoutException', 'ResourceNotFoundException', 'ServiceUnavailableException'],
 'glue': ['AccessDeniedException', 'AlreadyExistsException', 'ConcurrentModificationException', 'ConcurrentRunsExceededException', 'ConditionCheckFailureException', 'CrawlerNotRunningException', 'CrawlerRunningException', 'CrawlerStoppingException', 'EntityNotFoundException', 'GlueEncryptionException', 'IdempotentParameterMismatchException', 'InternalServiceException', 'InvalidInputException', 'NoScheduleException', 'OperationTimeoutException', 'ResourceNumberLimitExceededException', 'SchedulerNotRunningException', 'SchedulerRunningException', 'SchedulerTransitioningException', 'ValidationException', 'VersionMismatchException'],
 'iam': ['ConcurrentModification', 'ReportExpired', 'ReportNotPresent', 'ReportInProgress', 'DeleteConflict', 'DuplicateCertificate', 'DuplicateSSHPublicKey', 'EntityAlreadyExists', 'EntityTemporarilyUnmodifiable', 'InvalidAuthenticationCode', 'InvalidCertificate', 'InvalidInput', 'InvalidPublicKey', 'InvalidUserType', 'KeyPairMismatch', 'LimitExceeded', 'MalformedCertificate', 'MalformedPolicyDocument', 'NoSuchEntity', 'PasswordPolicyViolation', 'PolicyEvaluation', 'PolicyNotAttachable', 'ServiceFailure', 'NotSupportedService', 'UnmodifiableEntity', 'UnrecognizedPublicKeyEncoding'],
 'kinesis': ['ExpiredIteratorException', 'ExpiredNextTokenException', 'InternalFailureException', 'InvalidArgumentException', 'KMSAccessDeniedException', 'KMSDisabledException', 'KMSInvalidStateException', 'KMSNotFoundException', 'KMSOptInRequired', 'KMSThrottlingException', 'LimitExceededException', 'ProvisionedThroughputExceededException', 'ResourceInUseException', 'ResourceNotFoundException'],
 'kms': ['AlreadyExistsException', 'CloudHsmClusterInUseException', 'CloudHsmClusterInvalidConfigurationException', 'CloudHsmClusterNotActiveException', 'CloudHsmClusterNotFoundException', 'CloudHsmClusterNotRelatedException', 'CustomKeyStoreHasCMKsException', 'CustomKeyStoreInvalidStateException', 'CustomKeyStoreNameInUseException', 'CustomKeyStoreNotFoundException', 'DependencyTimeoutException', 'DisabledException', 'ExpiredImportTokenException', 'IncorrectKeyMaterialException', 'IncorrectTrustAnchorException', 'InvalidAliasNameException', 'InvalidArnException', 'InvalidCiphertextException', 'InvalidGrantIdException', 'InvalidGrantTokenException', 'InvalidImportTokenException', 'InvalidKeyUsageException', 'InvalidMarkerException', 'KMSInternalException', 'KMSInvalidStateException', 'KeyUnavailableException', 'LimitExceededException', 'MalformedPolicyDocumentException', 'NotFoundException', 'TagException', 'UnsupportedOperationException'],
 'lambda': ['CodeStorageExceededException', 'EC2AccessDeniedException', 'EC2ThrottledException', 'EC2UnexpectedException', 'ENILimitReachedException', 'InvalidParameterValueException', 'InvalidRequestContentException', 'InvalidRuntimeException', 'InvalidSecurityGroupIDException', 'InvalidSubnetIDException', 'InvalidZipFileException', 'KMSAccessDeniedException', 'KMSDisabledException', 'KMSInvalidStateException', 'KMSNotFoundException', 'PolicyLengthExceededException', 'PreconditionFailedException', 'RequestTooLargeException', 'ResourceConflictException', 'ResourceInUseException', 'ResourceNotFoundException', 'ServiceException', 'SubnetIPAddressLimitReachedException', 'TooManyRequestsException', 'UnsupportedMediaTypeException'],
 'logs': ['DataAlreadyAcceptedException', 'InvalidOperationException', 'InvalidParameterException', 'InvalidSequenceTokenException', 'LimitExceededException', 'MalformedQueryException', 'OperationAbortedException', 'ResourceAlreadyExistsException', 'ResourceNotFoundException', 'ServiceUnavailableException', 'UnrecognizedClientException'],
 'neptune': ['AuthorizationNotFound', 'CertificateNotFound', 'DBClusterAlreadyExistsFault', 'DBClusterNotFoundFault', 'DBClusterParameterGroupNotFound', 'DBClusterQuotaExceededFault', 'DBClusterRoleAlreadyExists', 'DBClusterRoleNotFound', 'DBClusterRoleQuotaExceeded', 'DBClusterSnapshotAlreadyExistsFault', 'DBClusterSnapshotNotFoundFault', 'DBInstanceAlreadyExists', 'DBInstanceNotFound', 'DBParameterGroupAlreadyExists', 'DBParameterGroupNotFound', 'DBParameterGroupQuotaExceeded', 'DBSecurityGroupNotFound', 'DBSnapshotAlreadyExists', 'DBSnapshotNotFound', 'DBSubnetGroupAlreadyExists', 'DBSubnetGroupDoesNotCoverEnoughAZs', 'DBSubnetGroupNotFoundFault', 'DBSubnetGroupQuotaExceeded', 'DBSubnetQuotaExceededFault', 'DBUpgradeDependencyFailure', 'DomainNotFoundFault', 'EventSubscriptionQuotaExceeded', 'InstanceQuotaExceeded', 'InsufficientDBClusterCapacityFault', 'InsufficientDBInstanceCapacity', 'InsufficientStorageClusterCapacity', 'InvalidDBClusterSnapshotStateFault', 'InvalidDBClusterStateFault', 'InvalidDBInstanceState', 'InvalidDBParameterGroupState', 'InvalidDBSecurityGroupState', 'InvalidDBSnapshotState', 'InvalidDBSubnetGroupStateFault', 'InvalidDBSubnetStateFault', 'InvalidEventSubscriptionState', 'InvalidRestoreFault', 'InvalidSubnet', 'InvalidVPCNetworkStateFault', 'KMSKeyNotAccessibleFault', 'OptionGroupNotFoundFault', 'ProvisionedIopsNotAvailableInAZFault', 'ResourceNotFoundFault', 'SNSInvalidTopic', 'SNSNoAuthorization', 'SNSTopicArnNotFound', 'SharedSnapshotQuotaExceeded', 'SnapshotQuotaExceeded', 'SourceNotFound', 'StorageQuotaExceeded', 'StorageTypeNotSupported', 'SubnetAlreadyInUse', 'SubscriptionAlreadyExist', 'SubscriptionCategoryNotFound', 'SubscriptionNotFound'],
 'rds': ['AuthorizationAlreadyExists', 'AuthorizationNotFound', 'AuthorizationQuotaExceeded', 'BackupPolicyNotFoundFault', 'CertificateNotFound', 'DBClusterAlreadyExistsFault', 'DBClusterBacktrackNotFoundFault', 'DBClusterEndpointAlreadyExistsFault', 'DBClusterEndpointNotFoundFault', 'DBClusterEndpointQuotaExceededFault', 'DBClusterNotFoundFault', 'DBClusterParameterGroupNotFound', 'DBClusterQuotaExceededFault', 'DBClusterRoleAlreadyExists', 'DBClusterRoleNotFound', 'DBClusterRoleQuotaExceeded', 'DBClusterSnapshotAlreadyExistsFault', 'DBClusterSnapshotNotFoundFault', 'DBInstanceAlreadyExists', 'DBInstanceAutomatedBackupNotFound', 'DBInstanceAutomatedBackupQuotaExceeded', 'DBInstanceNotFound', 'DBInstanceRoleAlreadyExists', 'DBInstanceRoleNotFound', 'DBInstanceRoleQuotaExceeded', 'DBLogFileNotFoundFault', 'DBParameterGroupAlreadyExists', 'DBParameterGroupNotFound', 'DBParameterGroupQuotaExceeded', 'DBSecurityGroupAlreadyExists', 'DBSecurityGroupNotFound', 'DBSecurityGroupNotSupported', 'QuotaExceeded.DBSecurityGroup', 'DBSnapshotAlreadyExists', 'DBSnapshotNotFound', 'DBSubnetGroupAlreadyExists', 'DBSubnetGroupDoesNotCoverEnoughAZs', 'DBSubnetGroupNotAllowedFault', 'DBSubnetGroupNotFoundFault', 'DBSubnetGroupQuotaExceeded', 'DBSubnetQuotaExceededFault', 'DBUpgradeDependencyFailure', 'DomainNotFoundFault', 'EventSubscriptionQuotaExceeded', 'GlobalClusterAlreadyExistsFault', 'GlobalClusterNotFoundFault', 'GlobalClusterQuotaExceededFault', 'InstanceQuotaExceeded', 'InsufficientDBClusterCapacityFault', 'InsufficientDBInstanceCapacity', 'InsufficientStorageClusterCapacity', 'InvalidDBClusterCapacityFault', 'InvalidDBClusterEndpointStateFault', 'InvalidDBClusterSnapshotStateFault', 'InvalidDBClusterStateFault', 'InvalidDBInstanceAutomatedBackupState', 'InvalidDBInstanceState', 'InvalidDBParameterGroupState', 'InvalidDBSecurityGroupState', 'InvalidDBSnapshotState', 'InvalidDBSubnetGroupFault', 'InvalidDBSubnetGroupStateFault', 'InvalidDBSubnetStateFault', 'InvalidEventSubscriptionState', 'InvalidGlobalClusterStateFault', 'InvalidOptionGroupStateFault', 'InvalidRestoreFault', 'InvalidS3BucketFault', 'InvalidSubnet', 'InvalidVPCNetworkStateFault', 'KMSKeyNotAccessibleFault', 'OptionGroupAlreadyExistsFault', 'OptionGroupNotFoundFault', 'OptionGroupQuotaExceededFault', 'PointInTimeRestoreNotEnabled', 'ProvisionedIopsNotAvailableInAZFault', 'ReservedDBInstanceAlreadyExists', 'ReservedDBInstanceNotFound', 'ReservedDBInstanceQuotaExceeded', 'ReservedDBInstancesOfferingNotFound', 'ResourceNotFoundFault', 'SNSInvalidTopic', 'SNSNoAuthorization', 'SNSTopicArnNotFound', 'SharedSnapshotQuotaExceeded', 'SnapshotQuotaExceeded', 'SourceNotFound', 'StorageQuotaExceeded', 'StorageTypeNotSupported', 'SubnetAlreadyInUse', 'SubscriptionAlreadyExist', 'SubscriptionCategoryNotFound', 'SubscriptionNotFound'],
 'route53': ['ConcurrentModification', 'ConflictingDomainExists', 'ConflictingTypes', 'DelegationSetAlreadyCreated', 'DelegationSetAlreadyReusable', 'DelegationSetInUse', 'DelegationSetNotAvailable', 'DelegationSetNotReusable', 'HealthCheckAlreadyExists', 'HealthCheckInUse', 'HealthCheckVersionMismatch', 'HostedZoneAlreadyExists', 'HostedZoneNotEmpty', 'HostedZoneNotFound', 'HostedZoneNotPrivate', 'IncompatibleVersion', 'InsufficientCloudWatchLogsResourcePolicy', 'InvalidArgument', 'InvalidChangeBatch', 'InvalidDomainName', 'InvalidInput', 'InvalidPaginationToken', 'InvalidTrafficPolicyDocument', 'InvalidVPCId', 'LastVPCAssociation', 'LimitsExceeded', 'NoSuchChange', 'NoSuchCloudWatchLogsLogGroup', 'NoSuchDelegationSet', 'NoSuchGeoLocation', 'NoSuchHealthCheck', 'NoSuchHostedZone', 'NoSuchQueryLoggingConfig', 'NoSuchTrafficPolicy', 'NoSuchTrafficPolicyInstance', 'NotAuthorizedException', 'PriorRequestNotComplete', 'PublicZoneVPCAssociation', 'QueryLoggingConfigAlreadyExists', 'ThrottlingException', 'TooManyHealthChecks', 'TooManyHostedZones', 'TooManyTrafficPolicies', 'TooManyTrafficPolicyInstances', 'TooManyTrafficPolicyVersionsForCurrentPolicy', 'TooManyVPCAssociationAuthorizations', 'TrafficPolicyAlreadyExists', 'TrafficPolicyInUse', 'TrafficPolicyInstanceAlreadyExists', 'VPCAssociationAuthorizationNotFound', 'VPCAssociationNotFound'],
 's3': ['BucketAlreadyExists', 'BucketAlreadyOwnedByYou', 'NoSuchBucket', 'NoSuchKey', 'NoSuchUpload', 'ObjectAlreadyInActiveTierError', 'ObjectNotInActiveTierError'],
 'sagemaker': ['ResourceInUse', 'ResourceLimitExceeded', 'ResourceNotFound'],
 'secretsmanager': ['DecryptionFailure', 'EncryptionFailure', 'InternalServiceError', 'InvalidNextTokenException', 'InvalidParameterException', 'InvalidRequestException', 'LimitExceededException', 'MalformedPolicyDocumentException', 'PreconditionNotMetException', 'ResourceExistsException', 'ResourceNotFoundException'],
 'ses': ['AccountSendingPausedException', 'AlreadyExists', 'CannotDelete', 'ConfigurationSetAlreadyExists', 'ConfigurationSetDoesNotExist', 'ConfigurationSetSendingPausedException', 'CustomVerificationEmailInvalidContent', 'CustomVerificationEmailTemplateAlreadyExists', 'CustomVerificationEmailTemplateDoesNotExist', 'EventDestinationAlreadyExists', 'EventDestinationDoesNotExist', 'FromEmailAddressNotVerified', 'InvalidCloudWatchDestination', 'InvalidConfigurationSet', 'InvalidFirehoseDestination', 'InvalidLambdaFunction', 'InvalidPolicy', 'InvalidRenderingParameter', 'InvalidS3Configuration', 'InvalidSNSDestination', 'InvalidSnsTopic', 'InvalidTemplate', 'InvalidTrackingOptions', 'LimitExceeded', 'MailFromDomainNotVerifiedException', 'MessageRejected', 'MissingRenderingAttribute', 'ProductionAccessNotGranted', 'RuleDoesNotExist', 'RuleSetDoesNotExist', 'TemplateDoesNotExist', 'TrackingOptionsAlreadyExistsException', 'TrackingOptionsDoesNotExistException'],
 'sns': ['AuthorizationError', 'EndpointDisabled', 'FilterPolicyLimitExceeded', 'InternalError', 'InvalidParameter', 'ParameterValueInvalid', 'InvalidSecurity', 'KMSAccessDenied', 'KMSDisabled', 'KMSInvalidState', 'KMSNotFound', 'KMSOptInRequired', 'KMSThrottling', 'NotFound', 'PlatformApplicationDisabled', 'SubscriptionLimitExceeded', 'Throttled', 'TopicLimitExceeded'],
 'sqs': ['AWS.SimpleQueueService.BatchEntryIdsNotDistinct', 'AWS.SimpleQueueService.BatchRequestTooLong', 'AWS.SimpleQueueService.EmptyBatchRequest', 'InvalidAttributeName', 'AWS.SimpleQueueService.InvalidBatchEntryId', 'InvalidIdFormat', 'InvalidMessageContents', 'AWS.SimpleQueueService.MessageNotInflight', 'OverLimit', 'AWS.SimpleQueueService.PurgeQueueInProgress', 'AWS.SimpleQueueService.QueueDeletedRecently', 'AWS.SimpleQueueService.NonExistentQueue', 'QueueAlreadyExists', 'ReceiptHandleIsInvalid', 'AWS.SimpleQueueService.TooManyEntriesInBatchRequest', 'AWS.SimpleQueueService.UnsupportedOperation'],
 'ssm': ['AlreadyExistsException', 'AssociatedInstances', 'AssociationAlreadyExists', 'AssociationDoesNotExist', 'AssociationExecutionDoesNotExist', 'AssociationLimitExceeded', 'AssociationVersionLimitExceeded', 'AutomationDefinitionNotFoundException', 'AutomationDefinitionVersionNotFoundException', 'AutomationExecutionLimitExceededException', 'AutomationExecutionNotFoundException', 'AutomationStepNotFoundException', 'ComplianceTypeCountLimitExceededException', 'CustomSchemaCountLimitExceededException', 'DocumentAlreadyExists', 'DocumentLimitExceeded', 'DocumentPermissionLimit', 'DocumentVersionLimitExceeded', 'DoesNotExistException', 'DuplicateDocumentContent', 'DuplicateDocumentVersionName', 'DuplicateInstanceId', 'FeatureNotAvailableException', 'HierarchyLevelLimitExceededException', 'HierarchyTypeMismatchException', 'IdempotentParameterMismatch', 'InternalServerError', 'InvalidActivation', 'InvalidActivationId', 'InvalidAggregatorException', 'InvalidAllowedPatternException', 'InvalidAssociation', 'InvalidAssociationVersion', 'InvalidAutomationExecutionParametersException', 'InvalidAutomationSignalException', 'InvalidAutomationStatusUpdateException', 'InvalidCommandId', 'InvalidDeleteInventoryParametersException', 'InvalidDeletionIdException', 'InvalidDocument', 'InvalidDocumentContent', 'InvalidDocumentOperation', 'InvalidDocumentSchemaVersion', 'InvalidDocumentVersion', 'InvalidFilter', 'InvalidFilterKey', 'InvalidFilterOption', 'InvalidFilterValue', 'InvalidInstanceId', 'InvalidInstanceInformationFilterValue', 'InvalidInventoryGroupException', 'InvalidInventoryItemContextException', 'InvalidInventoryRequestException', 'InvalidItemContentException', 'InvalidKeyId', 'InvalidNextToken', 'InvalidNotificationConfig', 'InvalidOptionException', 'InvalidOutputFolder', 'InvalidOutputLocation', 'InvalidParameters', 'InvalidPermissionType', 'InvalidPluginName', 'InvalidResourceId', 'InvalidResourceType', 'InvalidResultAttributeException', 'InvalidRole', 'InvalidSchedule', 'InvalidTarget', 'InvalidTypeNameException', 'InvalidUpdate', 'InvocationDoesNotExist', 'ItemContentMismatchException', 'ItemSizeLimitExceededException', 'MaxDocumentSizeExceeded', 'ParameterAlreadyExists', 'ParameterLimitExceeded', 'ParameterMaxVersionLimitExceeded', 'ParameterNotFound', 'ParameterPatternMismatchException', 'ParameterVersionLabelLimitExceeded', 'ParameterVersionNotFound', 'ResourceDataSyncAlreadyExistsException', 'ResourceDataSyncCountExceededException', 'ResourceDataSyncInvalidConfigurationException', 'ResourceDataSyncNotFoundException', 'ResourceInUseException', 'ResourceLimitExceededException', 'StatusUnchanged', 'SubTypeCountLimitExceededException', 'TargetInUseException', 'TargetNotConnected', 'TooManyTagsError', 'TooManyUpdates', 'TotalSizeLimitExceededException', 'UnsupportedInventoryItemContextException', 'UnsupportedInventorySchemaVersionException', 'UnsupportedOperatingSystem', 'UnsupportedParameterType', 'UnsupportedPlatformType'],
 'stepfunctions': ['ActivityDoesNotExist', 'ActivityLimitExceeded', 'ActivityWorkerLimitExceeded', 'ExecutionAlreadyExists', 'ExecutionDoesNotExist', 'ExecutionLimitExceeded', 'InvalidArn', 'InvalidDefinition', 'InvalidExecutionInput', 'InvalidName', 'InvalidOutput', 'InvalidToken', 'MissingRequiredParameter', 'ResourceNotFound', 'StateMachineAlreadyExists', 'StateMachineDeleting', 'StateMachineDoesNotExist', 'StateMachineLimitExceeded', 'TaskDoesNotExist', 'TaskTimedOut', 'TooManyTags'],
 'sts': ['ExpiredTokenException', 'IDPCommunicationError', 'IDPRejectedClaim', 'InvalidAuthorizationMessageException', 'InvalidIdentityToken', 'MalformedPolicyDocument', 'PackedPolicyTooLarge', 'RegionDisabledException'],
 'xray': ['InvalidRequestException', 'RuleLimitExceededException', 'ThrottledException']}

I know this question was asked awhile ago, but I have done this before and it allows for more control when aligning items.If you look at it like web programming, it helps. You just nest another LinearLayout that will contain your button inside of it. You can then change the gravity of the button's layout and make it go to the right while the TextView is still on the left.

Try this code:

<LinearLayout
xmlns:android="http://schemas.android.com/apk/res/android"
android:layout_width="fill_parent"
android:layout_height="wrap_content"             
android:orientation="horizontal" 
android:layout_marginTop="35dp">

<TextView
    android:id="@+id/lblExpenseCancel"
    android:layout_width="wrap_content"
    android:layout_height="wrap_content"
    android:text="@string/cancel" 
    android:textColor="#404040"         
    android:layout_marginLeft="10dp" 
    android:textSize="20sp" 
    android:layout_marginTop="9dp"/>

<LinearLayout
    android:layout_width="fill_parent"
    android:layout_height="wrap_content"
    android:gravity="right"
    android:orientation="horizontal" >

    <Button
        android:id="@+id/btnAddExpense"
        android:layout_width="wrap_content"
        android:layout_height="45dp"
        android:background="@drawable/stitch_button"
        android:layout_marginLeft="10dp"                    
        android:text="@string/add" 
        android:layout_gravity="right" 
        android:layout_marginRight="15dp"/>

</LinearLayout>

You may have to play with the padding on the nested layout so that it acts how you want it.

id is protected, just add a public method in your /models/User.php

public function getId()
{
  return $this->id;
}

so you can call it

$id = Auth::user()->getId();

remember allways to test if user is logged...

if (Auth::check())
{
     $id = Auth::user()->getId();
}

The easiest way is to use lubridate:

library(lubridate)
prods.all$Date2 <- mdy(prods.all$Date2)

This function automatically returns objects of class POSIXct and will work with either factors or characters.

I liked Dale's answer, and I also added

git clone --depth 2 --no-checkout repo-to-clone existing-dir/existing-dir.tmp
git branch dev_new214
git checkout dev_new214
git add .
git commit
git checkout dev
git merge dev_new214

The shallow depth avoided a lot of extra early dev commits. The new branch gave us a good visual history that there was some new code from this server that was placed in. That is the perfect use branches in my opinion. My thanks to the great insight of all the people who posted here.

Correct ways in jQuery are -

• $('#test').prop('scrollHeight') OR
• $('#test')[0].scrollHeight OR
• $('#test').get(0).scrollHeight

There are several problems in your code.

First the big ones:

1. You are creating a new figure and a new axes in every iteration of your loop ? put fig = plt.figure and ax = fig.add_subplot(1,1,1) outside of the loop.

2. Don't use the Locators. Call the functions ax.set_xticks() and ax.grid() with the correct keywords.

3. With plt.axes() you are creating a new axes again. Use ax.set_aspect('equal').

The minor things: You should not mix the MATLAB-like syntax like plt.axis() with the objective syntax. Use ax.set_xlim(a,b) and ax.set_ylim(a,b)

This should be a working minimal example:

import numpy as np
import matplotlib.pyplot as plt

fig = plt.figure()
ax = fig.add_subplot(1, 1, 1)

# Major ticks every 20, minor ticks every 5
major_ticks = np.arange(0, 101, 20)
minor_ticks = np.arange(0, 101, 5)

ax.set_xticks(major_ticks)
ax.set_xticks(minor_ticks, minor=True)
ax.set_yticks(major_ticks)
ax.set_yticks(minor_ticks, minor=True)

# And a corresponding grid
ax.grid(which='both')

# Or if you want different settings for the grids:
ax.grid(which='minor', alpha=0.2)
ax.grid(which='major', alpha=0.5)

plt.show()

Output is this:

I agree with Int.TryParse but as an alternative you could use Regex.

 Regex nonNumericRegex = new Regex(@"\D");
 if (nonNumericRegex.IsMatch(txtEvDistance.Text))
 {
   //Contains non numeric characters.
   return false;
 }

VAL1 and VAL2 need to be dimmed as integer, not as string, to be used as an argument for Cells, which takes integers, not strings, as arguments.

Dim val1 As Integer, val2 As Integer, i As Integer

For i = 1 To 333

  Sheets("Feuil2").Activate
  ActiveSheet.Cells(i, 1).Select

    val1 = Cells(i, 1).Value
    val2 = Cells(i, 2).Value

Sheets("Classeur2.csv").Select
Cells(val1, val2).Select

ActiveCell.FormulaR1C1 = "1"

Next i

In Laravel 6 you have to add 'change' to your migrations file as follows:

$table->enum('is_approved', array('0','1'))->default('0')->change();

useLayoutEffect could accomplish this with an empty set of observers ([]) if the functionality is actually similar to componentWillMount -- it will run before the first content gets to the DOM -- though there are actually two updates but they are synchronous before drawing to the screen.

for example:

function MyComponent({ ...andItsProps }) {
     useLayoutEffect(()=> {
          console.log('I am about to render!');
     },[]);

     return (<div>some content</div>);
}

The benefit over useState with an initializer/setter or useEffect is though it may compute a render pass, there are no actual re-renders to the DOM that a user will notice, and it is run before the first noticable render, which is not the case for useEffect. The downside is of course a slight delay in your first render since a check/update has to happen before painting to screen. It really does depend on your use-case, though.

I think personally, useMemo is fine in some niche cases where you need to do something heavy -- as long as you keep in mind it is the exception vs the norm.

Keep in mind that SQL strings can not be larger than 4000 bytes, while Pl/SQL can have strings as large as 32767 bytes. see below for an example of inserting a large string via an anonymous block which I believe will do everything you need it to do.

note I changed the varchar2(32000) to CLOB

set serveroutput ON 
CREATE TABLE testclob 
  ( 
     id NUMBER, 
     c  CLOB, 
     d  VARCHAR2(4000) 
  ); 

DECLARE 
    reallybigtextstring CLOB := '123'; 
    i                   INT; 
BEGIN 
    WHILE Length(reallybigtextstring) <= 60000 LOOP 
        reallybigtextstring := reallybigtextstring 
                               || '000000000000000000000000000000000'; 
    END LOOP; 

    INSERT INTO testclob 
                (id, 
                 c, 
                 d) 
    VALUES     (0, 
                reallybigtextstring, 
                'done'); 

    dbms_output.Put_line('I have finished inputting your clob: ' 
                         || Length(reallybigtextstring)); 
END; 

/ 
SELECT * 
FROM   testclob; 


 "I have finished inputting your clob: 60030"

If the first segment doesn't start with / it is a relative route. router.navigate needs a relativeTo parameter for relative navigation

Either you make the route absolute:

this.router.navigate(['/foo-content', 'bar-contents', 'baz-content', 'page'], this.params.queryParams)

or you pass relativeTo

this.router.navigate(['../foo-content', 'bar-contents', 'baz-content', 'page'], {queryParams: this.params.queryParams, relativeTo: this.currentActivatedRoute})

See also

• https://github.com/angular/angular.io/blob/c61d8195f3b63c3e03bf2a3c12ef2596796c741d/public/docs/_examples/router/ts/app/crisis-center/crisis-detail.component.1.ts#L108
• https://github.com/angular/angular/issues/9476

You can do an interactive rebase:

git rebase -i <commit>

This will bring up your default editor. Just delete the line containing the commit you want to remove to delete that commit.

You will, of course, need access to the remote repository to apply this change there too.

See this question: Git: removing selected commits from repository

Use shortcut: Ctrl+Q. You can customize in Settings

Yes: use ArrayList.

In Java, "normal" arrays are fixed-size. You have to give them a size and can't expand them or contract them. To change the size, you have to make a new array and copy the data you want - which is inefficient and a pain for you.

Fortunately, there are all kinds of built-in classes that implement common data structures, and other useful tools too. You'll want to check the Java 6 API for a full list of them.

One caveat: ArrayList can only hold objects (e.g. Integers), not primitives (e.g. ints). In MOST cases, autoboxing/autounboxing will take care of this for you silently, but you could get some weird behavior depending on what you're doing.

Easiest way is using laravel toArray function itself:

    $result = array_map(function ($value) {
        return $value instanceof Arrayable ? $value->toArray() : $value;
    }, $result);

It may be useful to notice that very good answers given above may not be enough. It is because of one more tick is required here:

Glimmer is an interesting option for JRuby users which provides a very Ruby-ish interface to the SWT toolkit. (SWT is the user interface framework behind Eclipse, which delivers fast performance and familiar UI metaphors by making use of native widgets on the various platforms it supports: Windows, OS X, Linux, etc.) SWT always appealed to me as a Java developer, but coding it was painful in the extreme. Glimmer makes the process a lot more straightforward by emphasizing convention over configuration, and by valuing DRYness and all the other normal Ruby goodness.

Another neat option is SproutCore, a Javascript-based GUI toolkit with Ruby bindings developed by Apple. At least, the demos for it look great, and otherinbox built a pretty slick looking application on top of it. Personally, I've spent quite a few hours trying to get it running on two systems -- one Windows and one Linux -- and haven't succeeded on either one -- I keep running into dependency issues with Merb or other pieces of the SproutCore stack. But it's intriguing enough that I'll go back after a few weeks and try again, hoping that the issues get resolved in that time.

Your error is because you have:

     JOIN user ON article.author_id = user.id
LEFT JOIN user ON article.modified_by = user.id

You have two instances of the same table, but the database can't determine which is which. To fix this, you need to use table aliases:

     JOIN USER u ON article.author_id = u.id
LEFT JOIN USER u2 ON article.modified_by = u2.id

It's good habit to always alias your tables, unless you like writing the full table name all the time when you don't have situations like these.

The next issues to address will be:

SELECT article.* , section.title, category.title, user.name, user.name

1) Never use SELECT * - always spell out the columns you want, even if it is the entire table. Read this SO Question to understand why.

2) You'll get ambiguous column errors relating to the user.name columns because again, the database can't tell which table instance to pull data from. Using table aliases fixes the issue:

SELECT article.* , section.title, category.title, u.name, u2.name

Points to keep in mind:

1. Pointers can be NULL, references cannot be NULL.

2. References are easier to use, const can be used for a reference when we don't want to change value and just need a reference in a function.

3. Pointer used with a * while references used with a &.

4. Use pointers when pointer arithmetic operation are required.

5. You can have pointers to a void type int a=5; void *p = &a; but cannot have a reference to a void type.

Pointer Vs Reference

void fun(int *a)
{
    cout<<a<<'\n'; // address of a = 0x7fff79f83eac
    cout<<*a<<'\n'; // value at a = 5
    cout<<a+1<<'\n'; // address of a increment by 4 bytes(int) = 0x7fff79f83eb0
    cout<<*(a+1)<<'\n'; // value here is by default = 0
}
void fun(int &a)
{
    cout<<a<<'\n'; // reference of original a passed a = 5
}
int a=5;
fun(&a);
fun(a);

Verdict when to use what

Pointer: For array, linklist, tree implementations and pointer arithmetic.

Reference: In function parameters and return types.

You can make function getStyles that'll take an element and other arguments are properties that's values you want.

const convertRestArgsIntoStylesArr = ([...args]) => {
    return args.slice(1);
}

const getStyles = function () {
    const args = [...arguments];
    const [element] = args;

    let stylesProps = [...args][1] instanceof Array ? args[1] : convertRestArgsIntoStylesArr(args);

    const styles = window.getComputedStyle(element);
    const stylesObj = stylesProps.reduce((acc, v) => {
        acc[v] = styles.getPropertyValue(v);
        return acc;
    }, {});

    return stylesObj;
};

Now, you can use this function like this:

const styles = getStyles(document.body, "height", "width");

OR

const styles = getStyles(document.body, ["height", "width"]);

Basic method for beginners like me.

public void loadDataToJtable(ArrayList<String> liste){
        
    rows = table.getRowCount();

    cols = table.getColumnCount();

    for (int i = 0; i < rows ; i++) {

            for ( int k  = 0; k < cols ; k++) {
            
            for (int h = 0; h < list1.size(); h++) {
                
                String b =  list1.get(h);
                b = table.getValueAt(i, k).toString();
                
            }
        }
    }
}

$("#success-alert").fadeTo(2000, 500).slideUp(500, function(){
    $("#success-alert").alert('close');
});

Where fadeTo parameters are fadeTo(speed, opacity)

Remove the project from the server from the Server View. Then run the project under the same server.

The problem is as @BalusC told corrupt of server.xml of tomcat which is configured in the eclipse. So when you do the above process server.xml will be recreated .

NOTE: see Cheetah's answer below as it identifies a prerequisite to get this solution to work. Setting the BackColor of the TextBox.

I think what you really want to do is enable the TextBox and set the ReadOnly property to true.

It's a bit tricky to change the color of the text in a disabled TextBox. I think you'd probably have to subclass and override the OnPaint event.

ReadOnly though should give you the same result as !Enabled and allow you to maintain control of the color and formatting of the TextBox. I think it will also still support selecting and copying text from the TextBox which is not possible with a disabled TextBox.

Another simple alternative is to use a Label instead of a TextBox.

The following is a great in depth reference by Dare Obasanjo on the differences between C# and Java. I always find myself referring to this article when switching between the two.

http://www.25hoursaday.com/CsharpVsJava.html

To simply redirect a browser using javascript:

window.location.href = "http://example.com/new_url";

To redirect AND submit a form (i.e. login details), requires no javascript:

<form action="/new_url" method="POST">
   <input name="username">
   <input type="password" name="password">
   <button type="submit">Submit</button>
</form>

Your question title and your question body are different. Ruby does not have a starts_with? method. Rails, which is a Ruby framework, however, does, as sepp2k states. See his comment on his answer for the link to the documentation for it.

You could always use a regular expression though:

if SomeString.match(/^abc/) 
   # SomeString starts with abc

^ means "start of string" in regular expressions

Combining the best of these answers, if you do:

command 2> >(grep -v something 1>&2)

...then all stdout is preserved as stdout and all stderr is preserved as stderr, but you won't see any lines in stderr containing the string "something".

This has the unique advantage of not reversing or discarding stdout and stderr, nor smushing them together, nor using any temporary files.

def isValidHostname(hostname):

    if len(hostname) > 255:
        return False
    if hostname[-1:] == ".":
        hostname = hostname[:-1]   # strip exactly one dot from the right,
                                   #  if present
    allowed = re.compile("(?!-)[A-Z\d-]{1,63}(?<!-)$", re.IGNORECASE)
    return all(allowed.match(x) for x in hostname.split("."))

Update

the library already have Java/Kotlin support, see github.

Original

To simplify I did a class to be used simply, I added it on Encryption library to use it you just do as follow:

Add the gradle library:

compile 'se.simbio.encryption:library:2.0.0'

and use it:

Encryption encryption = Encryption.getDefault("Key", "Salt", new byte[16]);
String encrypted = encryption.encryptOrNull("top secret string");
String decrypted = encryption.decryptOrNull(encrypted);

if you not want add the Encryption library you can just copy the following class to your project. If you are in an android project you need to import android Base64 in this class, if you are in a pure java project you need to add this class manually you can get it here

Encryption.java

package se.simbio.encryption;

import java.io.UnsupportedEncodingException;
import java.security.InvalidAlgorithmParameterException;
import java.security.InvalidKeyException;
import java.security.MessageDigest;
import java.security.NoSuchAlgorithmException;
import java.security.SecureRandom;
import java.security.spec.InvalidKeySpecException;
import java.security.spec.KeySpec;

import javax.crypto.BadPaddingException;
import javax.crypto.Cipher;
import javax.crypto.IllegalBlockSizeException;
import javax.crypto.NoSuchPaddingException;
import javax.crypto.SecretKey;
import javax.crypto.SecretKeyFactory;
import javax.crypto.spec.IvParameterSpec;
import javax.crypto.spec.PBEKeySpec;
import javax.crypto.spec.SecretKeySpec;

/**
 * A class to make more easy and simple the encrypt routines, this is the core of Encryption library
 */
public class Encryption {

    /**
     * The Builder used to create the Encryption instance and that contains the information about
     * encryption specifications, this instance need to be private and careful managed
     */
    private final Builder mBuilder;

    /**
     * The private and unique constructor, you should use the Encryption.Builder to build your own
     * instance or get the default proving just the sensible information about encryption
     */
    private Encryption(Builder builder) {
        mBuilder = builder;
    }

    /**
     * @return an default encryption instance or {@code null} if occur some Exception, you can
     * create yur own Encryption instance using the Encryption.Builder
     */
    public static Encryption getDefault(String key, String salt, byte[] iv) {
        try {
            return Builder.getDefaultBuilder(key, salt, iv).build();
        } catch (NoSuchAlgorithmException e) {
            e.printStackTrace();
            return null;
        }
    }

    /**
     * Encrypt a String
     *
     * @param data the String to be encrypted
     *
     * @return the encrypted String or {@code null} if you send the data as {@code null}
     *
     * @throws UnsupportedEncodingException       if the Builder charset name is not supported or if
     *                                            the Builder charset name is not supported
     * @throws NoSuchAlgorithmException           if the Builder digest algorithm is not available
     *                                            or if this has no installed provider that can
     *                                            provide the requested by the Builder secret key
     *                                            type or it is {@code null}, empty or in an invalid
     *                                            format
     * @throws NoSuchPaddingException             if no installed provider can provide the padding
     *                                            scheme in the Builder digest algorithm
     * @throws InvalidAlgorithmParameterException if the specified parameters are inappropriate for
     *                                            the cipher
     * @throws InvalidKeyException                if the specified key can not be used to initialize
     *                                            the cipher instance
     * @throws InvalidKeySpecException            if the specified key specification cannot be used
     *                                            to generate a secret key
     * @throws BadPaddingException                if the padding of the data does not match the
     *                                            padding scheme
     * @throws IllegalBlockSizeException          if the size of the resulting bytes is not a
     *                                            multiple of the cipher block size
     * @throws NullPointerException               if the Builder digest algorithm is {@code null} or
     *                                            if the specified Builder secret key type is
     *                                            {@code null}
     * @throws IllegalStateException              if the cipher instance is not initialized for
     *                                            encryption or decryption
     */
    public String encrypt(String data) throws UnsupportedEncodingException, NoSuchAlgorithmException, NoSuchPaddingException, InvalidAlgorithmParameterException, InvalidKeyException, InvalidKeySpecException, BadPaddingException, IllegalBlockSizeException {
        if (data == null) return null;
        SecretKey secretKey = getSecretKey(hashTheKey(mBuilder.getKey()));
        byte[] dataBytes = data.getBytes(mBuilder.getCharsetName());
        Cipher cipher = Cipher.getInstance(mBuilder.getAlgorithm());
        cipher.init(Cipher.ENCRYPT_MODE, secretKey, mBuilder.getIvParameterSpec(), mBuilder.getSecureRandom());
        return Base64.encodeToString(cipher.doFinal(dataBytes), mBuilder.getBase64Mode());
    }

    /**
     * This is a sugar method that calls encrypt method and catch the exceptions returning
     * {@code null} when it occurs and logging the error
     *
     * @param data the String to be encrypted
     *
     * @return the encrypted String or {@code null} if you send the data as {@code null}
     */
    public String encryptOrNull(String data) {
        try {
            return encrypt(data);
        } catch (Exception e) {
            e.printStackTrace();
            return null;
        }
    }

    /**
     * This is a sugar method that calls encrypt method in background, it is a good idea to use this
     * one instead the default method because encryption can take several time and with this method
     * the process occurs in a AsyncTask, other advantage is the Callback with separated methods,
     * one for success and other for the exception
     *
     * @param data     the String to be encrypted
     * @param callback the Callback to handle the results
     */
    public void encryptAsync(final String data, final Callback callback) {
        if (callback == null) return;
        new Thread(new Runnable() {
            @Override
            public void run() {
                try {
                    String encrypt = encrypt(data);
                    if (encrypt == null) {
                        callback.onError(new Exception("Encrypt return null, it normally occurs when you send a null data"));
                    }
                    callback.onSuccess(encrypt);
                } catch (Exception e) {
                    callback.onError(e);
                }
            }
        }).start();
    }

    /**
     * Decrypt a String
     *
     * @param data the String to be decrypted
     *
     * @return the decrypted String or {@code null} if you send the data as {@code null}
     *
     * @throws UnsupportedEncodingException       if the Builder charset name is not supported or if
     *                                            the Builder charset name is not supported
     * @throws NoSuchAlgorithmException           if the Builder digest algorithm is not available
     *                                            or if this has no installed provider that can
     *                                            provide the requested by the Builder secret key
     *                                            type or it is {@code null}, empty or in an invalid
     *                                            format
     * @throws NoSuchPaddingException             if no installed provider can provide the padding
     *                                            scheme in the Builder digest algorithm
     * @throws InvalidAlgorithmParameterException if the specified parameters are inappropriate for
     *                                            the cipher
     * @throws InvalidKeyException                if the specified key can not be used to initialize
     *                                            the cipher instance
     * @throws InvalidKeySpecException            if the specified key specification cannot be used
     *                                            to generate a secret key
     * @throws BadPaddingException                if the padding of the data does not match the
     *                                            padding scheme
     * @throws IllegalBlockSizeException          if the size of the resulting bytes is not a
     *                                            multiple of the cipher block size
     * @throws NullPointerException               if the Builder digest algorithm is {@code null} or
     *                                            if the specified Builder secret key type is
     *                                            {@code null}
     * @throws IllegalStateException              if the cipher instance is not initialized for
     *                                            encryption or decryption
     */
    public String decrypt(String data) throws UnsupportedEncodingException, NoSuchAlgorithmException, InvalidKeySpecException, NoSuchPaddingException, InvalidAlgorithmParameterException, InvalidKeyException, BadPaddingException, IllegalBlockSizeException {
        if (data == null) return null;
        byte[] dataBytes = Base64.decode(data, mBuilder.getBase64Mode());
        SecretKey secretKey = getSecretKey(hashTheKey(mBuilder.getKey()));
        Cipher cipher = Cipher.getInstance(mBuilder.getAlgorithm());
        cipher.init(Cipher.DECRYPT_MODE, secretKey, mBuilder.getIvParameterSpec(), mBuilder.getSecureRandom());
        byte[] dataBytesDecrypted = (cipher.doFinal(dataBytes));
        return new String(dataBytesDecrypted);
    }

    /**
     * This is a sugar method that calls decrypt method and catch the exceptions returning
     * {@code null} when it occurs and logging the error
     *
     * @param data the String to be decrypted
     *
     * @return the decrypted String or {@code null} if you send the data as {@code null}
     */
    public String decryptOrNull(String data) {
        try {
            return decrypt(data);
        } catch (Exception e) {
            e.printStackTrace();
            return null;
        }
    }

    /**
     * This is a sugar method that calls decrypt method in background, it is a good idea to use this
     * one instead the default method because decryption can take several time and with this method
     * the process occurs in a AsyncTask, other advantage is the Callback with separated methods,
     * one for success and other for the exception
     *
     * @param data     the String to be decrypted
     * @param callback the Callback to handle the results
     */
    public void decryptAsync(final String data, final Callback callback) {
        if (callback == null) return;
        new Thread(new Runnable() {
            @Override
            public void run() {
                try {
                    String decrypt = decrypt(data);
                    if (decrypt == null) {
                        callback.onError(new Exception("Decrypt return null, it normally occurs when you send a null data"));
                    }
                    callback.onSuccess(decrypt);
                } catch (Exception e) {
                    callback.onError(e);
                }
            }
        }).start();
    }

    /**
     * creates a 128bit salted aes key
     *
     * @param key encoded input key
     *
     * @return aes 128 bit salted key
     *
     * @throws NoSuchAlgorithmException     if no installed provider that can provide the requested
     *                                      by the Builder secret key type
     * @throws UnsupportedEncodingException if the Builder charset name is not supported
     * @throws InvalidKeySpecException      if the specified key specification cannot be used to
     *                                      generate a secret key
     * @throws NullPointerException         if the specified Builder secret key type is {@code null}
     */
    private SecretKey getSecretKey(char[] key) throws NoSuchAlgorithmException, UnsupportedEncodingException, InvalidKeySpecException {
        SecretKeyFactory factory = SecretKeyFactory.getInstance(mBuilder.getSecretKeyType());
        KeySpec spec = new PBEKeySpec(key, mBuilder.getSalt().getBytes(mBuilder.getCharsetName()), mBuilder.getIterationCount(), mBuilder.getKeyLength());
        SecretKey tmp = factory.generateSecret(spec);
        return new SecretKeySpec(tmp.getEncoded(), mBuilder.getKeyAlgorithm());
    }

    /**
     * takes in a simple string and performs an sha1 hash
     * that is 128 bits long...we then base64 encode it
     * and return the char array
     *
     * @param key simple inputted string
     *
     * @return sha1 base64 encoded representation
     *
     * @throws UnsupportedEncodingException if the Builder charset name is not supported
     * @throws NoSuchAlgorithmException     if the Builder digest algorithm is not available
     * @throws NullPointerException         if the Builder digest algorithm is {@code null}
     */
    private char[] hashTheKey(String key) throws UnsupportedEncodingException, NoSuchAlgorithmException {
        MessageDigest messageDigest = MessageDigest.getInstance(mBuilder.getDigestAlgorithm());
        messageDigest.update(key.getBytes(mBuilder.getCharsetName()));
        return Base64.encodeToString(messageDigest.digest(), Base64.NO_PADDING).toCharArray();
    }

    /**
     * When you encrypt or decrypt in callback mode you get noticed of result using this interface
     */
    public interface Callback {

        /**
         * Called when encrypt or decrypt job ends and the process was a success
         *
         * @param result the encrypted or decrypted String
         */
        void onSuccess(String result);

        /**
         * Called when encrypt or decrypt job ends and has occurred an error in the process
         *
         * @param exception the Exception related to the error
         */
        void onError(Exception exception);

    }

    /**
     * This class is used to create an Encryption instance, you should provide ALL data or start
     * with the Default Builder provided by the getDefaultBuilder method
     */
    public static class Builder {

        private byte[] mIv;
        private int mKeyLength;
        private int mBase64Mode;
        private int mIterationCount;
        private String mSalt;
        private String mKey;
        private String mAlgorithm;
        private String mKeyAlgorithm;
        private String mCharsetName;
        private String mSecretKeyType;
        private String mDigestAlgorithm;
        private String mSecureRandomAlgorithm;
        private SecureRandom mSecureRandom;
        private IvParameterSpec mIvParameterSpec;

        /**
         * @return an default builder with the follow defaults:
         * the default char set is UTF-8
         * the default base mode is Base64
         * the Secret Key Type is the PBKDF2WithHmacSHA1
         * the default salt is "some_salt" but can be anything
         * the default length of key is 128
         * the default iteration count is 65536
         * the default algorithm is AES in CBC mode and PKCS 5 Padding
         * the default secure random algorithm is SHA1PRNG
         * the default message digest algorithm SHA1
         */
        public static Builder getDefaultBuilder(String key, String salt, byte[] iv) {
            return new Builder()
                    .setIv(iv)
                    .setKey(key)
                    .setSalt(salt)
                    .setKeyLength(128)
                    .setKeyAlgorithm("AES")
                    .setCharsetName("UTF8")
                    .setIterationCount(1)
                    .setDigestAlgorithm("SHA1")
                    .setBase64Mode(Base64.DEFAULT)
                    .setAlgorithm("AES/CBC/PKCS5Padding")
                    .setSecureRandomAlgorithm("SHA1PRNG")
                    .setSecretKeyType("PBKDF2WithHmacSHA1");
        }

        /**
         * Build the Encryption with the provided information
         *
         * @return a new Encryption instance with provided information
         *
         * @throws NoSuchAlgorithmException if the specified SecureRandomAlgorithm is not available
         * @throws NullPointerException     if the SecureRandomAlgorithm is {@code null} or if the
         *                                  IV byte array is null
         */
        public Encryption build() throws NoSuchAlgorithmException {
            setSecureRandom(SecureRandom.getInstance(getSecureRandomAlgorithm()));
            setIvParameterSpec(new IvParameterSpec(getIv()));
            return new Encryption(this);
        }

        /**
         * @return the charset name
         */
        private String getCharsetName() {
            return mCharsetName;
        }

        /**
         * @param charsetName the new charset name
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setCharsetName(String charsetName) {
            mCharsetName = charsetName;
            return this;
        }

        /**
         * @return the algorithm
         */
        private String getAlgorithm() {
            return mAlgorithm;
        }

        /**
         * @param algorithm the algorithm to be used
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setAlgorithm(String algorithm) {
            mAlgorithm = algorithm;
            return this;
        }

        /**
         * @return the key algorithm
         */
        private String getKeyAlgorithm() {
            return mKeyAlgorithm;
        }

        /**
         * @param keyAlgorithm the keyAlgorithm to be used in keys
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setKeyAlgorithm(String keyAlgorithm) {
            mKeyAlgorithm = keyAlgorithm;
            return this;
        }

        /**
         * @return the Base 64 mode
         */
        private int getBase64Mode() {
            return mBase64Mode;
        }

        /**
         * @param base64Mode set the base 64 mode
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setBase64Mode(int base64Mode) {
            mBase64Mode = base64Mode;
            return this;
        }

        /**
         * @return the type of aes key that will be created, on KITKAT+ the API has changed, if you
         * are getting problems please @see <a href="http://android-developers.blogspot.com.br/2013/12/changes-to-secretkeyfactory-api-in.html">http://android-developers.blogspot.com.br/2013/12/changes-to-secretkeyfactory-api-in.html</a>
         */
        private String getSecretKeyType() {
            return mSecretKeyType;
        }

        /**
         * @param secretKeyType the type of AES key that will be created, on KITKAT+ the API has
         *                      changed, if you are getting problems please @see <a href="http://android-developers.blogspot.com.br/2013/12/changes-to-secretkeyfactory-api-in.html">http://android-developers.blogspot.com.br/2013/12/changes-to-secretkeyfactory-api-in.html</a>
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setSecretKeyType(String secretKeyType) {
            mSecretKeyType = secretKeyType;
            return this;
        }

        /**
         * @return the value used for salting
         */
        private String getSalt() {
            return mSalt;
        }

        /**
         * @param salt the value used for salting
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setSalt(String salt) {
            mSalt = salt;
            return this;
        }

        /**
         * @return the key
         */
        private String getKey() {
            return mKey;
        }

        /**
         * @param key the key.
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setKey(String key) {
            mKey = key;
            return this;
        }

        /**
         * @return the length of key
         */
        private int getKeyLength() {
            return mKeyLength;
        }

        /**
         * @param keyLength the length of key
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setKeyLength(int keyLength) {
            mKeyLength = keyLength;
            return this;
        }

        /**
         * @return the number of times the password is hashed
         */
        private int getIterationCount() {
            return mIterationCount;
        }

        /**
         * @param iterationCount the number of times the password is hashed
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setIterationCount(int iterationCount) {
            mIterationCount = iterationCount;
            return this;
        }

        /**
         * @return the algorithm used to generate the secure random
         */
        private String getSecureRandomAlgorithm() {
            return mSecureRandomAlgorithm;
        }

        /**
         * @param secureRandomAlgorithm the algorithm to generate the secure random
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setSecureRandomAlgorithm(String secureRandomAlgorithm) {
            mSecureRandomAlgorithm = secureRandomAlgorithm;
            return this;
        }

        /**
         * @return the IvParameterSpec bytes array
         */
        private byte[] getIv() {
            return mIv;
        }

        /**
         * @param iv the byte array to create a new IvParameterSpec
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setIv(byte[] iv) {
            mIv = iv;
            return this;
        }

        /**
         * @return the SecureRandom
         */
        private SecureRandom getSecureRandom() {
            return mSecureRandom;
        }

        /**
         * @param secureRandom the Secure Random
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setSecureRandom(SecureRandom secureRandom) {
            mSecureRandom = secureRandom;
            return this;
        }

        /**
         * @return the IvParameterSpec
         */
        private IvParameterSpec getIvParameterSpec() {
            return mIvParameterSpec;
        }

        /**
         * @param ivParameterSpec the IvParameterSpec
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setIvParameterSpec(IvParameterSpec ivParameterSpec) {
            mIvParameterSpec = ivParameterSpec;
            return this;
        }

        /**
         * @return the message digest algorithm
         */
        private String getDigestAlgorithm() {
            return mDigestAlgorithm;
        }

        /**
         * @param digestAlgorithm the algorithm to be used to get message digest instance
         *
         * @return this instance to follow the Builder patter
         */
        public Builder setDigestAlgorithm(String digestAlgorithm) {
            mDigestAlgorithm = digestAlgorithm;
            return this;
        }

    }

}    

Sort of:

class some_class {
    static std::vector<std::string> v; // declaration
};

const char *vinit[] = {"one", "two", "three"};

std::vector<std::string> some_class::v(vinit, end(vinit)); // definition

end is just so I don't have to write vinit+3 and keep it up to date if the length changes later. Define it as:

template<typename T, size_t N>
T * end(T (&ra)[N]) {
    return ra + N;
}

I think the only way is to put required data on the server and allow only logged-in user to access the data as required (you can also make some calculations server side). This wont protect your javascript code but make it unoperatable without the server side code

You should do like this:

@Html.DropDownListFor(m => m.ContribType, 
                new SelectList(Model.ContribTypeOptions, 
                               "ContribId", "Value"))

Where:

m => m.ContribType

is a property where the result value will be.

Your code is blanking out your file:

import csv
workingdir = "C:\Mer\Ven\sample"
csvfile = workingdir+"\test3.csv"
f=open(csvfile,'wb') # opens file for writing (erases contents)
csv.writer(f, delimiter =' ',quotechar =',',quoting=csv.QUOTE_MINIMAL)

if you want to read the file in, you will need to use csv.reader and open the file for reading.

import csv
workingdir = "C:\Mer\Ven\sample"
csvfile = workingdir+"\test3.csv"
f=open(csvfile,'rb') # opens file for reading
reader = csv.reader(f)
for line in reader:
    print line

If you want to write that back out to a new file with different delimiters, you can create a new file and specify those delimiters and write out each line (instead of printing the tuple).

Following is my simplest solution to this lengthy trouble.

<FrameLayout
    android:layout_width="112dp"
    android:layout_height="112dp"
    android:layout_marginLeft="16dp" <!-- May vary according to your needs -->
    android:layout_marginRight="16dp" <!-- May vary according to your needs -->
    android:layout_centerVertical="true">
    <!-- following imageView acts as the boarder which sitting in the background of our main container ImageView -->
    <ImageView
        android:layout_width="112dp"
        android:layout_height="112dp"
        android:background="#000"/>
    <!-- following imageView holds the image as the container to our image -->
    <!-- layout_margin defines the width of our boarder, here it's 1dp -->
    <ImageView
        android:layout_width="110dp"
        android:layout_height="110dp"
        android:layout_margin="1dp"
        android:id="@+id/itemImageThumbnailImgVw"
        android:src="@drawable/banana"
        android:background="#FFF"/> </FrameLayout>

In the following answer I've explained it well enough, please have a look at that too!

I hope this will be helpful to someone else out there!

I tried this:

SELECT DISTINCT link,id,day,month FROM posted
     WHERE ad='$key' ORDER BY day, month

It doesn't work. It returns too many rows. Say there are 10 rows with same links, but different day/month/id. This script will return all 10, and I want only the first one (for this link).

What you're asking doesn't make sense.

Either you want the distinct value of all of link, id, day, month, or you need to find a criterion to choose which of the values of id, day, month you want to use, if you just want at most one distinct value of link.

Otherwise, what you're after is similar to MySQL's hidden columns in GROUP BY/HAVING statements, which is non-standard SQL, and can actually be quite confusing.

You could in fact use a GROUP BY link if it made sense to pick any row for a given link value.

Alternatively, you could use a sub-select to pick the row with the minimal id for a each link value (as described in this answer):

 SELECT link, id, day, month FROM posted
     WHERE (link, id) IN
           (SELECT link, MIN(id) FROM posted ad='$key' GROUP BY link)

You can also set the title of your chart by adding the title parameter as follows

ax.set(xlabel='common xlabel', ylabel='common ylabel', title='some title')

I used to have this problem sometimes, the solution was to change the USB cable to a new one

[ and subset are not substitutable:

[ does return a vector if only one column is selected.

df = data.frame(a="a",b="b")    

identical(
  df[,c("a")], 
  subset(df,select="a")
) 

identical(
  df[,c("a","b")],  
  subset(df,select=c("a","b"))
)

Protected Member

Protected Member of a class in only available in the contained class (in which it has been declared) and in the derived class within the assembly and also outside the assembly.

Means if a class that resides outside the assembly can use the protected member of the other assembly by inherited that class only.

We can exposed the Protected member outside the assembly by inherited that class and use it in the derived class only.

Note: Protected members are not accessible using the object in the derived class.

Internal Member

Internal Member of a class is available or access within the assembly either creating object or in a derived class or you can say it is accessible across all the classes within the assembly.

Note: Internal members not accessible outside the assembly either using object creating or in a derived class.

Protected Internal

Protected Internal access modifier is combination Protected or Internal.

Protected Internal Member can be available within the entire assembly in which it declared either creating object or by inherited that class. And can be accessible outside the assembly in a derived class only.

Note: Protected Internal member works as Internal within the same assembly and works as Protected for outside the assembly.

It's used for proxying requests to other servers.

An example from http://wiki.nginx.org/LoadBalanceExample is:

http {
  upstream myproject {
    server 127.0.0.1:8000 weight=3;
    server 127.0.0.1:8001;
    server 127.0.0.1:8002;    
    server 127.0.0.1:8003;
  }

  server {
    listen 80;
    server_name www.domain.com;
    location / {
      proxy_pass http://myproject;
    }
  }
}

This means all requests for / go to the any of the servers listed under upstream XXX, with a preference for port 8000.

Check out WinObjC:

https://github.com/Microsoft/WinObjC

It's an official, open-source project by Microsoft that integrates with Visual Studio + Windows.

Use git rebase --abort. From the official Linux kernel documentation for git rebase:

git rebase --continue | --skip | --abort | --edit-todo

To summarize:

p 10.to_s(16) #=> "a"
p "%x" % 10 #=> "a"
p "%02X" % 10 #=> "0A"
p sprintf("%02X", 10) #=> "0A"
p "#%02X%02X%02X" % [255, 0, 10] #=> "#FF000A"

List comprehension can shorten things...

win_percentages = [m**2.0 / (m**2.0 + n**2.0) * 100 for m, n in [a[i] for i in NL_East]]

For me it was a mistake in the pom.xml - I'd set <scope>provided<scope> on my dependencies, and this was making them not get copied during the mvn package stage.

My symptoms were the error message the OP posted, and that the jars were not included in the WEB-INF/lib path inside the .war after package was run. When I removed the scope, the jars appeared in the output, and all loads up fine now.

You should be aware that you should avoid file I/O from within Linux kernel when possible. The main idea is to go "one level deeper" and call VFS level functions instead of the syscall handler directly:

Includes:

#include <linux/fs.h>
#include <asm/segment.h>
#include <asm/uaccess.h>
#include <linux/buffer_head.h>

Opening a file (similar to open):

struct file *file_open(const char *path, int flags, int rights) 
{
    struct file *filp = NULL;
    mm_segment_t oldfs;
    int err = 0;

    oldfs = get_fs();
    set_fs(get_ds());
    filp = filp_open(path, flags, rights);
    set_fs(oldfs);
    if (IS_ERR(filp)) {
        err = PTR_ERR(filp);
        return NULL;
    }
    return filp;
}

Close a file (similar to close):

void file_close(struct file *file) 
{
    filp_close(file, NULL);
}

Reading data from a file (similar to pread):

int file_read(struct file *file, unsigned long long offset, unsigned char *data, unsigned int size) 
{
    mm_segment_t oldfs;
    int ret;

    oldfs = get_fs();
    set_fs(get_ds());

    ret = vfs_read(file, data, size, &offset);

    set_fs(oldfs);
    return ret;
}   

Writing data to a file (similar to pwrite):

int file_write(struct file *file, unsigned long long offset, unsigned char *data, unsigned int size) 
{
    mm_segment_t oldfs;
    int ret;

    oldfs = get_fs();
    set_fs(get_ds());

    ret = vfs_write(file, data, size, &offset);

    set_fs(oldfs);
    return ret;
}

Syncing changes a file (similar to fsync):

int file_sync(struct file *file) 
{
    vfs_fsync(file, 0);
    return 0;
}

[Edit] Originally, I proposed using file_fsync, which is gone in newer kernel versions. Thanks to the poor guy suggesting the change, but whose change was rejected. The edit was rejected before I could review it.

Multilingual Version, tested on Japanese OS
Batch File

set getdesk=REG QUERY "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v Desktop

FOR /f "delims=(=" %%G IN ('%getdesk% ^|find "_SZ"') DO set desktop=%%G

set desktop1=%desktop:*USERPROFILE%\=%

cd "%userprofile%\%desktop1%"

set getdesk=

set desktop1=

set desktop=

You can find a whole bunch of Linq examples in visual studio. Just select Help -> Samples, and then unzip the Linq samples.

Open the linq samples solution and open the LinqSamples.cs of the SampleQueries project.

The answer you are looking for is in method Linq14:

int[] numbersA = { 0, 2, 4, 5, 6, 8, 9 };
int[] numbersB = { 1, 3, 5, 7, 8 };

var pairs =
   from a in numbersA
   from b in numbersB
   where a < b
   select new {a, b};

Details

• Swift 5.1, Xcode 11.3.1

Solution

extension UIViewController {
    func removeFromNavigationController() { navigationController?.removeController(.last) { self == $0 } }
}

extension UINavigationController {
    enum ViewControllerPosition { case first, last }
    enum ViewControllersGroupPosition { case first, last, all }

    func removeController(_ position: ViewControllerPosition, animated: Bool = true,
                          where closure: (UIViewController) -> Bool) {
        var index: Int?
        switch position {
            case .first: index = viewControllers.firstIndex(where: closure)
            case .last: index = viewControllers.lastIndex(where: closure)
        }
        if let index = index { removeControllers(animated: animated, in: Range(index...index)) }
    }

    func removeControllers(_ position: ViewControllersGroupPosition, animated: Bool = true,
                           where closure: (UIViewController) -> Bool) {
        var range: Range<Int>?
        switch position {
            case .first: range = viewControllers.firstRange(where: closure)
            case .last:
                guard let _range = viewControllers.reversed().firstRange(where: closure) else { return }
                let count = viewControllers.count - 1
                range = .init(uncheckedBounds: (lower: count - _range.min()!, upper: count - _range.max()!))
            case .all:
                let viewControllers = self.viewControllers.filter { !closure($0) }
                setViewControllers(viewControllers, animated: animated)
                return
        }
        if let range = range { removeControllers(animated: animated, in: range) }
    }

    func removeControllers(animated: Bool = true, in range: Range<Int>) {
        var viewControllers = self.viewControllers
        viewControllers.removeSubrange(range)
        setViewControllers(viewControllers, animated: animated)
    }

    func removeControllers(animated: Bool = true, in range: ClosedRange<Int>) {
        removeControllers(animated: animated, in: Range(range))
    }
}

private extension Array {
    func firstRange(where closure: (Element) -> Bool) -> Range<Int>? {
        guard var index = firstIndex(where: closure) else { return nil }
        var indexes = [Int]()
        while index < count && closure(self[index]) {
            indexes.append(index)
            index += 1
        }
        if indexes.isEmpty { return nil }
        return Range<Int>(indexes.min()!...indexes.max()!)
    }
}

Usage

removeFromParent()

navigationController?.removeControllers(in: 1...3)

navigationController?.removeController(.first) { $0 != self }

navigationController?.removeController(.last) { $0 != self }

navigationController?.removeControllers(.all) { $0.isKind(of: ViewController.self) }

navigationController?.removeControllers(.first) { !$0.isKind(of: ViewController.self) }

navigationController?.removeControllers(.last) { $0 != self }

Full Sample

Do not forget to paste here the solution code

import UIKit

class ViewController2: ViewController {}

class ViewController: UIViewController {

    private var tag: Int = 0
    deinit { print("____ DEINITED: \(self), tag: \(tag)" ) }

    override func viewDidLoad() {
        super.viewDidLoad()
        print("____ INITED: \(self)")
        let stackView = UIStackView()
        stackView.axis = .vertical
        view.addSubview(stackView)
        stackView.translatesAutoresizingMaskIntoConstraints = false
        stackView.centerYAnchor.constraint(equalTo: view.centerYAnchor).isActive = true
        stackView.centerXAnchor.constraint(equalTo: view.centerXAnchor).isActive = true

        stackView.addArrangedSubview(createButton(text: "Push ViewController() white", selector: #selector(pushWhiteViewController)))
        stackView.addArrangedSubview(createButton(text: "Push ViewController() gray", selector: #selector(pushGrayViewController)))
        stackView.addArrangedSubview(createButton(text: "Push ViewController2() green", selector: #selector(pushController2)))
        stackView.addArrangedSubview(createButton(text: "Push & remove previous VC", selector: #selector(pushViewControllerAndRemovePrevious)))
        stackView.addArrangedSubview(createButton(text: "Remove first gray VC", selector: #selector(dropFirstGrayViewController)))
        stackView.addArrangedSubview(createButton(text: "Remove last gray VC", selector: #selector(dropLastGrayViewController)))
        stackView.addArrangedSubview(createButton(text: "Remove all gray VCs", selector: #selector(removeAllGrayViewControllers)))
        stackView.addArrangedSubview(createButton(text: "Remove all VCs exept Last", selector: #selector(removeAllViewControllersExeptLast)))
        stackView.addArrangedSubview(createButton(text: "Remove all exept first and last VCs", selector: #selector(removeAllViewControllersExeptFirstAndLast)))
        stackView.addArrangedSubview(createButton(text: "Remove all ViewController2()", selector: #selector(removeAllViewControllers2)))
        stackView.addArrangedSubview(createButton(text: "Remove first VCs where bg != .gray", selector: #selector(dropFirstViewControllers)))
        stackView.addArrangedSubview(createButton(text: "Remove last VCs where bg == .gray", selector: #selector(dropLastViewControllers)))
    }

    override func viewWillAppear(_ animated: Bool) {
        super.viewWillAppear(animated)
        if title?.isEmpty ?? true { title = "First" }
    }

    private func createButton(text: String, selector: Selector) -> UIButton {
        let button = UIButton()
        button.setTitle(text, for: .normal)
        button.setTitleColor(.blue, for: .normal)
        button.addTarget(self, action: selector, for: .touchUpInside)
        return button
    }
}

extension ViewController {

    private func createViewController<VC: ViewController>(backgroundColor: UIColor = .white) -> VC {
        let viewController = VC()
        let counter = (navigationController?.viewControllers.count ?? -1 ) + 1
        viewController.tag = counter
        viewController.title = "Controller \(counter)"
        viewController.view.backgroundColor = backgroundColor
        return viewController
    }

    @objc func pushWhiteViewController() {
        navigationController?.pushViewController(createViewController(), animated: true)
    }

    @objc func pushGrayViewController() {
        navigationController?.pushViewController(createViewController(backgroundColor: .lightGray), animated: true)
    }

    @objc func pushController2() {
        navigationController?.pushViewController(createViewController(backgroundColor: .green) as ViewController2, animated: true)
    }

    @objc func pushViewControllerAndRemovePrevious() {
        navigationController?.pushViewController(createViewController(), animated: true)
        removeFromNavigationController()
    }

    @objc func removeAllGrayViewControllers() {
        navigationController?.removeControllers(.all) { $0.view.backgroundColor == .lightGray }
    }

    @objc func removeAllViewControllersExeptLast() {
        navigationController?.removeControllers(.all) { $0 != self }
    }

    @objc func removeAllViewControllersExeptFirstAndLast() {
        guard let navigationController = navigationController, navigationController.viewControllers.count > 1 else { return }
        let lastIndex = navigationController.viewControllers.count - 1
        navigationController.removeControllers(in: 1..<lastIndex)
    }

    @objc func removeAllViewControllers2() {
        navigationController?.removeControllers(.all) { $0.isKind(of: ViewController2.self) }
    }

    @objc func dropFirstViewControllers() {
        navigationController?.removeControllers(.first) { $0.view.backgroundColor != .lightGray }
    }

    @objc func dropLastViewControllers() {
        navigationController?.removeControllers(.last) { $0.view.backgroundColor == .lightGray }
    }

    @objc func dropFirstGrayViewController() {
        navigationController?.removeController(.first) { $0.view.backgroundColor == .lightGray }
    }

    @objc func dropLastGrayViewController() {
        navigationController?.removeController(.last) { $0.view.backgroundColor == .lightGray }
    }
}

Result

You can do it by using display:table; in parent div and display: table-cell; vertical-align: middle; in child div

<div style="display:table;">_x000D_
      <div style="text-align: left;  height: 56px;  background-color: pink; display: table-cell; vertical-align: middle;">_x000D_
          <div style="background-color: lightblue; ">test</div>_x000D_
      </div>_x000D_
  </div>

just posting in case anyone else has the same error...

I was using 'await' outside of an 'async' function and for whatever reason that results in a 'missing ) after argument list' error.

The solution was to make the function asynchronous

function functionName(args) {}

becomes

async function functionName(args) {}

On Linux, you can get ELF header information by using either of the following two commands:

file {YOUR_JRE_LOCATION_HERE}/bin/java

o/p: ELF 64-bit LSB executable, AMD x86-64, version 1 (SYSV), for GNU/Linux 2.4.0, dynamically linked (uses shared libs), for GNU/Linux 2.4.0, not stripped

or

readelf -h {YOUR_JRE_LOCATION_HERE}/bin/java | grep 'Class'

o/p: Class: ELF64

Try the property: Environment.UserName.

Recently, I have to face the same thing in which I need to search the string from a huge array.

After some search I found It'll be easy to handle with simple code:

Code:

var items = mydata.filter(function(item){
    return item.word.toLowerCase().startsWith( 'gk );
})

See https://jsfiddle.net/maheshwaghmare/cfx3p40v/4/

Installing GD :

For CentOS / RedHat / Fedora :

sudo yum install php-gd

For Debian/ubuntu :

sudo apt-get install php5-gd

Installing freetype :

For CentOS / RedHat / Fedora :

sudo yum install freetype*

For Debian/ubuntu :

sudo apt-get install freetype*

Don't forget to restart apache after that (if you are using apache):

CentOS / RedHat / Fedora :

sudo /etc/init.d/httpd restart

Or

sudo service httpd restart

Debian/ubuntu :

sudo /etc/init.d/apache2 restart

Or

sudo service apache2 restart

Create a new datafile by running the following command:

alter tablespace TABLE_SPACE_NAME add datafile 'D:\oracle\Oradata\TEMP04.dbf'            
   size 2000M autoextend on;

The Location property has type Point which is a struct.

Instead of trying to modify the existing Point, try assigning a new Point object:

 this.balancePanel.Location = new Point(
     this.optionsPanel.Location.X,
     this.balancePanel.Location.Y
 );

For me it was a silly thing: my mac uploaded the file into iCloud, and that is why Xcode did not find it.

If you turn off the automatic upload, it wont happen again.

You can use this example

SELECT NVL((SELECT 1 FROM  DUAL WHERE   REGEXP_LIKE (:VALOR,'^[[:digit:]]+$')),0) FROM DUAL;

An HTTP GET request can't contain data to be posted to the server. However, you can add a query string to the request.

angular.http provides an option for it called params.

$http({
    url: user.details_path, 
    method: "GET",
    params: {user_id: user.id}
 });

See: http://docs.angularjs.org/api/ng.$http#get and https://docs.angularjs.org/api/ng/service/$http#usage (shows the params param)

While I currently lean toward RDL because it seems more flexible and easier to manage, RDLC has an advantage in that it seems to simplify your licensing. Because RDLC doesn’t need a Reporting Services instance, you won't need a Reporting Services License to use it.

I’m not sure if this still applies with the newer versions of SQL Server, but at one time if you chose to put the SQL Server Database and Reporting Services instances on two separate machines, you were required to have two separate SQL Server licenses:
http://social.msdn.microsoft.com/forums/en-US/sqlgetstarted/thread/82dd5acd-9427-4f64-aea6-511f09aac406/

You can Bing for other similar blogs and posts regarding Reporting Services licensing.