To multiply, use mult for signed multiplication and multu for unsigned multiplication. Note that the result of the multiplication of two 32-bit numbers yields a 64-number. If you want the result back in $v0 that means that you assume the result will fit in 32 bits.

The 32 most significant bits will be held in the HI special register (accessible by mfhi instruction) and the 32 least significant bits will be held in the LO special register (accessible by the mflo instruction):

E.g.:

li $a0, 5
li $a1, 3
mult $a0, $a1
mfhi $a2 # 32 most significant bits of multiplication to $a2
mflo $v0 # 32 least significant bits of multiplication to $v0

To divide, use div for signed division and divu for unsigned division. In this case, the HI special register will hold the remainder and the LO special register will hold the quotient of the division.

E.g.:

div $a0, $a1
mfhi $a2 # remainder to $a2
mflo $v0 # quotient to $v0

Easiest way

The most trivial way to download a binary file from an FTP server using .NET framework is using WebClient.DownloadFile:

WebClient client = new WebClient();
client.Credentials = new NetworkCredential("username", "password");
client.DownloadFile(
    "ftp://ftp.example.com/remote/path/file.zip", @"C:\local\path\file.zip");

Advanced options

Use FtpWebRequest, only if you need a greater control, that WebClient does not offer (like TLS/SSL encryption, progress monitoring, ascii/text transfer mode, resuming transfers, etc). Easy way is to just copy an FTP response stream to FileStream using Stream.CopyTo:

FtpWebRequest request =
    (FtpWebRequest)WebRequest.Create("ftp://ftp.example.com/remote/path/file.zip");
request.Credentials = new NetworkCredential("username", "password");
request.Method = WebRequestMethods.Ftp.DownloadFile;

using (Stream ftpStream = request.GetResponse().GetResponseStream())
using (Stream fileStream = File.Create(@"C:\local\path\file.zip"))
{
    ftpStream.CopyTo(fileStream);
}

Progress monitoring

If you need to monitor a download progress, you have to copy the contents by chunks yourself:

FtpWebRequest request =
    (FtpWebRequest)WebRequest.Create("ftp://ftp.example.com/remote/path/file.zip");
request.Credentials = new NetworkCredential("username", "password");
request.Method = WebRequestMethods.Ftp.DownloadFile;

using (Stream ftpStream = request.GetResponse().GetResponseStream())
using (Stream fileStream = File.Create(@"C:\local\path\file.zip"))
{
    byte[] buffer = new byte[10240];
    int read;
    while ((read = ftpStream.Read(buffer, 0, buffer.Length)) > 0)
    {
        fileStream.Write(buffer, 0, read);
        Console.WriteLine("Downloaded {0} bytes", fileStream.Position);
    }
}

For GUI progress (WinForms ProgressBar), see:
FtpWebRequest FTP download with ProgressBar

Downloading folder

If you want to download all files from a remote folder, see
C# Download all files and subdirectories through FTP.

If your system is Posix.2 compliant it should supply the printf utility:

$ printf "print 'zap'\nfor r in range(3): print 'rob'" | python
zap
rob
rob
rob

The generic HttpRequestMessage<T> has been removed. This :

new HttpRequestMessage<Widget>(widget)

will no longer work.

Instead, from this post, the ASP.NET team has included some new calls to support this functionality:

HttpClient.PostAsJsonAsync<T>(T value) sends “application/json”
HttpClient.PostAsXmlAsync<T>(T value) sends “application/xml”

So, the new code (from dunston) becomes:

Widget widget = new Widget()
widget.Name = "test"
widget.Price = 1;

HttpClient client = new HttpClient();
client.BaseAddress = new Uri("http://localhost:44268");
client.PostAsJsonAsync("api/test", widget)
    .ContinueWith((postTask) => postTask.Result.EnsureSuccessStatusCode() );

Google Reflections seems to be much faster than Spring. Found this feature request that adresses this difference: http://www.opensaga.org/jira/browse/OS-738

This is a reason to use Reflections as startup time of my application is really important during development. Reflections seems also to be very easy to use for my use case (find all implementers of an interface).

You can close files not csv.writer object, it should be:

f = open(fileName, "wb")
writer = csv.writer(f)
String[] entries = "first*second*third".split("*");
writer.writerows(entries)
f.close()

Found various approaches to refresh the application in selenium :-

1.driver.navigate().refresh();
2.driver.get(driver.getCurrentUrl());
3.driver.navigate().to(driver.getCurrentUrl());
4.driver.findElement(By.id("Contact-us")).sendKeys(Keys.F5); 
5.driver.executeScript("history.go(0)");

For live code, please refer the link http://www.ufthelp.com/2014/11/Methods-Browser-Refresh-Selenium.html

git clone https://[email protected]/User/Repository.git will prompt for a password then clone.

According the w3c spec height refers to the height of the viewable area e.g. on a 1280x1024 pixel resolution monitor 100% height = 1024 pixels.

min-height refers to the total height of the page including content so on a page where the content is bigger than 1024px min-height:100% will stretch to include all of the content.

The other problem then is that padding and border are added to the height and width in most modern browsers except ie6(ie6 is actually quite logical but does not conform to the spec). This is called the box model. So if you specify

min-height: 100%;
padding: 5px; 

It will actually give you 100% + 5px + 5px for the height. To get around this you need a wrapper container.

<style>
    .FullHeight { 
       height: auto !important; /* ie 6 will ignore this */
       height: 100%;            /* ie 6 will use this instead of min-height */
       min-height: 100%;        /* ie 6 will ignore this */
    }

    .Padded {
       padding: 5px;
    }
</style>

<div class="FullHeight">
   <div class="Padded">
      Hello i am padded.
   </div
</div>

Can with defaulth value (T-SQL)

ALTER TABLE
    Regions
ADD
    HasPhotoInReadyStorage BIT NULL, --this column is nullable
    HasPhotoInWorkStorage BIT NOT NULL, --this column is not nullable
    HasPhotoInMaterialStorage BIT NOT NULL DEFAULT(0) --this column default value is false
GO

Wikipedia explains it better then I could

From the article - Top is 1st Tier:

I use this little function for VBA.

Public Function Pause(NumberOfSeconds As Variant)
    On Error GoTo Error_GoTo

    Dim PauseTime As Variant
    Dim Start As Variant
    Dim Elapsed As Variant

    PauseTime = NumberOfSeconds
    Start = Timer
    Elapsed = 0
    Do While Timer < Start + PauseTime
        Elapsed = Elapsed + 1
        If Timer = 0 Then
            ' Crossing midnight
            PauseTime = PauseTime - Elapsed
            Start = 0
            Elapsed = 0
        End If
        DoEvents
    Loop

Exit_GoTo:
    On Error GoTo 0
    Exit Function
Error_GoTo:
    Debug.Print Err.Number, Err.Description, Erl
    GoTo Exit_GoTo
End Function

Look up \enlargethispage in some LaTeX reference.

The best way to solve this problem would be by starting with customizing Bootstrap using their customization tools.

http://getbootstrap.com/customize/

Go down to @headings-color and change it from "inherit" to something that you would like your headers to be across the site (if you like the default just change it to #333).

Note that this will keep all your headings the same color, as you requested.

Now in order to accomplish what you want that after you make this change you can now overwrite them specifically in your own CSS to apply your own color to them. The "inherit" keyword I always have found to be a pain in frameworks.

Maybe someone finds this useful when working with React/Node/Axios. I used this for my Cloudinary image upload feature with react-dropzone on the UI.

    axios({
        method: 'get',
        url: file[0].preview, // blob url eg. blob:http://127.0.0.1:8000/e89c5d87-a634-4540-974c-30dc476825cc
        responseType: 'blob'
    }).then(function(response){
         var reader = new FileReader();
         reader.readAsDataURL(response.data); 
         reader.onloadend = function() {
             var base64data = reader.result;
             self.props.onMainImageDrop(base64data)
         }

    })

Yes, you can use a script like this to generate another script

SET NOCOUNT ON;
DECLARE @NewRole varchar(100), @SourceRole varchar(100);

-- Change as needed
SELECT @SourceRole = 'Giver', @NewRole = 'Taker';

SELECT
    state_desc + ' ' + permission_name + ' ON ' + OBJECT_NAME(major_id) + ' TO ' + @NewRole
FROM
    sys.database_permissions
WHERE
    grantee_principal_id = DATABASE_PRINCIPAL_ID(@SourceRole) AND
    -- 0 = DB,  1 = object/column, 3 = schema. 1 is normally enough
    class <= 3

This is taken from my answer here

Since this is the first question from Google I'll add the JavaScript style typeof alternative here as well:

myObject.getClass().getName() // String

Doxygen or Sandcastle help file builder are the primary tools that will extract XML documentation into HTML (and other forms) of external documentation.

Note that you can combine these documentation exporters with documentation generators - as you've discovered, Resharper has some rudimentary helpers, but there are also much more advanced tools to do this specific task, such as GhostDoc (for C#/VB code with XML documentation) or my addin Atomineer Pro Documentation (for C#, C++/CLI, C++, C, VB, Java, JavaScript, TypeScript, JScript, PHP, Unrealscript code containing XML, Doxygen, JavaDoc or Qt documentation).

It worked for me in the latest edition to Notepad using the UniversalIndentGui.

What I did was under the plugin setting choose Enable Text Auto Update, a window popped up and I selected javascript.

I actually found that calling fullScroll twice does the trick:

myScrollView.fullScroll(View.FOCUS_DOWN);

myScrollView.post(new Runnable() {
    @Override
    public void run() {
        myScrollView.fullScroll(View.FOCUS_DOWN);
    }
});

It may have something to do with the activation of the post() method right after performing the first (unsuccessful) scroll. I think this behavior occurs after any previous method call on myScrollView, so you can try replacing the first fullScroll() method by anything else that may be relevant to you.

To fully script-automate:

Create:

7z -mhc=on -mhe=on -pPasswordHere a %ZipDest% %WhatYouWantToZip%

Unzip:

7z x %ZipFile% -pPasswordHere

(Depending, you might need to: Set Path=C:\Program Files\7-Zip;%Path% )

<TL;DR> The problem is rather simple, actually: you are not matching the declared encoding (in the XML declaration) with the datatype of the input parameter. If you manually added <?xml version="1.0" encoding="utf-8"?><test/> to the string, then declaring the SqlParameter to be of type SqlDbType.Xml or SqlDbType.NVarChar would give you the "unable to switch the encoding" error. Then, when inserting manually via T-SQL, since you switched the declared encoding to be utf-16, you were clearly inserting a VARCHAR string (not prefixed with an upper-case "N", hence an 8-bit encoding, such as UTF-8) and not an NVARCHAR string (prefixed with an upper-case "N", hence the 16-bit UTF-16 LE encoding).

The fix should have been as simple as:

1. In the first case, when adding the declaration stating encoding="utf-8": simply don't add the XML declaration.
2. In the second case, when adding the declaration stating encoding="utf-16": either
   1. simply don't add the XML declaration, OR
   2. simply add an "N" to the input parameter type: SqlDbType.NVarChar instead of SqlDbType.VarChar :-) (or possibly even switch to using SqlDbType.Xml)

(Detailed response is below)

All of the answers here are over-complicated and unnecessary (regardless of the 121 and 184 up-votes for Christian's and Jon's answers, respectively). They might provide working code, but none of them actually answer the question. The issue is that nobody truly understood the question, which ultimately is about how the XML datatype in SQL Server works. Nothing against those two clearly intelligent people, but this question has little to nothing to do with serializing to XML. Saving XML data into SQL Server is much easier than what is being implied here.

It doesn't really matter how the XML is produced as long as you follow the rules of how to create XML data in SQL Server. I have a more thorough explanation (including working example code to illustrate the points outlined below) in an answer on this question: How to solve “unable to switch the encoding” error when inserting XML into SQL Server, but the basics are:

1. The XML declaration is optional
2. The XML datatype stores strings always as UCS-2 / UTF-16 LE
3. If your XML is UCS-2 / UTF-16 LE, then you:
   1. pass in the data as either NVARCHAR(MAX) or XML / SqlDbType.NVarChar (maxsize = -1) or SqlDbType.Xml, or if using a string literal then it must be prefixed with an upper-case "N".
   2. if specifying the XML declaration, it must be either "UCS-2" or "UTF-16" (no real difference here)
4. If your XML is 8-bit encoded (e.g. "UTF-8" / "iso-8859-1" / "Windows-1252"), then you:
   1. need to specify the XML declaration IF the encoding is different than the code page specified by the default Collation of the database
   2. you must pass in the data as VARCHAR(MAX) / SqlDbType.VarChar (maxsize = -1), or if using a string literal then it must not be prefixed with an upper-case "N".
   3. Whatever 8-bit encoding is used, the "encoding" noted in the XML declaration must match the actual encoding of the bytes.
   4. The 8-bit encoding will be converted into UTF-16 LE by the XML datatype

With the points outlined above in mind, and given that strings in .NET are always UTF-16 LE / UCS-2 LE (there is no difference between those in terms of encoding), we can answer your questions:

Is there a reason why I shouldn't use StringWriter to serialize an Object when I need it as a string afterwards?

No, your StringWriter code appears to be just fine (at least I see no issues in my limited testing using the 2nd code block from the question).

Wouldn't setting the encoding to UTF-16 (in the xml tag) work then?

It isn't necessary to provide the XML declaration. When it is missing, the encoding is assumed to be UTF-16 LE if you pass the string into SQL Server as NVARCHAR (i.e. SqlDbType.NVarChar) or XML (i.e. SqlDbType.Xml). The encoding is assumed to be the default 8-bit Code Page if passing in as VARCHAR (i.e. SqlDbType.VarChar). If you have any non-standard-ASCII characters (i.e. values 128 and above) and are passing in as VARCHAR, then you will likely see "?" for BMP characters and "??" for Supplementary Characters as SQL Server will convert the UTF-16 string from .NET into an 8-bit string of the current Database's Code Page before converting it back into UTF-16 / UCS-2. But you shouldn't get any errors.

On the other hand, if you do specify the XML declaration, then you must pass into SQL Server using the matching 8-bit or 16-bit datatype. So if you have a declaration stating that the encoding is either UCS-2 or UTF-16, then you must pass in as SqlDbType.NVarChar or SqlDbType.Xml. Or, if you have a declaration stating that the encoding is one of the 8-bit options (i.e. UTF-8, Windows-1252, iso-8859-1, etc), then you must pass in as SqlDbType.VarChar. Failure to match the declared encoding with the proper 8 or 16 -bit SQL Server datatype will result in the "unable to switch the encoding" error that you were getting.

For example, using your StringWriter-based serialization code, I simply printed the resulting string of the XML and used it in SSMS. As you can see below, the XML declaration is included (because StringWriter does not have an option to OmitXmlDeclaration like XmlWriter does), which poses no problem so long as you pass the string in as the correct SQL Server datatype:

-- Upper-case "N" prefix == NVARCHAR, hence no error:
DECLARE @Xml XML = N'<?xml version="1.0" encoding="utf-16"?>
<string>Test ?</string>';
SELECT @Xml;
-- <string>Test ?</string>

As you can see, it even handles characters beyond standard ASCII, given that ? is BMP Code Point U+1234, and is Supplementary Character Code Point U+1F638. However, the following:

-- No upper-case "N" prefix on the string literal, hence VARCHAR:
DECLARE @Xml XML = '<?xml version="1.0" encoding="utf-16"?>
<string>Test ?</string>';

results in the following error:

Msg 9402, Level 16, State 1, Line XXXXX
XML parsing: line 1, character 39, unable to switch the encoding

Ergo, all of that explanation aside, the full solution to your original question is:

You were clearly passing the string in as SqlDbType.VarChar. Switch to SqlDbType.NVarChar and it will work without needing to go through the extra step of removing the XML declaration. This is preferred over keeping SqlDbType.VarChar and removing the XML declaration because this solution will prevent data loss when the XML includes non-standard-ASCII characters. For example:

-- No upper-case "N" prefix on the string literal == VARCHAR, and no XML declaration:
DECLARE @Xml2 XML = '<string>Test ?</string>';
SELECT @Xml2;
-- <string>Test ???</string>

As you can see, there is no error this time, but now there is data-loss 🙀.

EXP (export) and IMP (import) are the two tools you need. It's is better to try to run these on the command line and on the same machine.

It can be run from remote, you just need to setup you TNSNAMES.ORA correctly and install all the developer tools with the same version as the database. Without knowing the error message you are experiencing then I can't help you to get exp/imp to work.

The command to export a single user:

exp userid=dba/dbapassword OWNER=username DIRECT=Y FILE=filename.dmp

This will create the export dump file.

To import the dump file into a different user schema, first create the newuser in SQLPLUS:

SQL> create user newuser identified by 'password' quota unlimited users;

Then import the data:

imp userid=dba/dbapassword FILE=filename.dmp FROMUSER=username TOUSER=newusername

If there is a lot of data then investigate increasing the BUFFERS or look into expdp/impdp

Most common errors for exp and imp are setup. Check your PATH includes $ORACLE_HOME/bin, check $ORACLE_HOME is set correctly and check $ORACLE_SID is set

If you use this way so you no need to import any third party class.

If you want concatenate String

Sample code for concate two String Array

public static String[] combineString(String[] first, String[] second){
        int length = first.length + second.length;
        String[] result = new String[length];
        System.arraycopy(first, 0, result, 0, first.length);
        System.arraycopy(second, 0, result, first.length, second.length);
        return result;
    }

If you want concatenate Int

Sample code for concate two Integer Array

public static int[] combineInt(int[] a, int[] b){
        int length = a.length + b.length;
        int[] result = new int[length];
        System.arraycopy(a, 0, result, 0, a.length);
        System.arraycopy(b, 0, result, a.length, b.length);
        return result;
    }

Here is Main method

    public static void main(String[] args) {

            String [] first = {"a", "b", "c"};
            String [] second = {"d", "e"};

            String [] joined = combineString(first, second);
            System.out.println("concatenated String array : " + Arrays.toString(joined));

            int[] array1 = {101,102,103,104};
            int[] array2 = {105,106,107,108};
            int[] concatenateInt = combineInt(array1, array2);

            System.out.println("concatenated Int array : " + Arrays.toString(concatenateInt));

        }
    }  

We can use this way also.

As far as I know the for loop uses the iter function and you should not mess with a structure while iterating over it.

Does it have to be a dictionary? If you use a list something like this might work:

while len(my_list) > 0:
    #get last item from list
    key, value = my_list.pop()
    #do something with key and value
    #maybe
    my_list.append((key, value))

Note that my_list is a list of the tuple (key, value). The only disadvantage is that you cannot access by key.

EDIT: Nevermind, the answer above is mostly the same.

I solved this, without having to completely reinstall Visual Studio 2013.

For those who may come across this in the future, the following steps worked for me:

1. Run the ISO (or vs_professional.exe).

2. If you get the error below, you need to update the Windows Registry to trick the installer into thinking you still have the base version. If you don't get this error, skip to step 3

   • Click the link for 'examine the log file' and look near the bottom of the log, for this line:

   • open regedit.exe and do an Edit > Find... for that GUID. In my case it was {6dff50d0-3bc3-4a92-b724-bf6d6a99de4f}. This was found in:

     HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall{6dff50d0-3bc3-4a92-b724-bf6d6a99de4f}

   • Edit the BundleVersion value and change it to a lower version. I changed mine from 12.0.21005.13 to 12.0.21000.13:

   • Exit the registry

3. Run the ISO (or vs_professional.exe) again. If it has a repair button like the image below, you can skip to step 4.

   

   • Otherwise you have to let the installer fix the registry. I did this by "installing" at least one feature, even though I think I already had all features (they were not detected). This took about 20 minutes.

4. Run the ISO (or vs_professional.exe) again. This time repair should be visible.

5. Click Repair and let it update your installation and apply its embedded license key. This took about 20 minutes.

Now when you run Visual Studio 2013, it should indicate that a license key was applied, under Help > Register Product:

Hope this helps somebody in the future!

Reference blog 'story'

For MultiIndex you can extract its subindex using

df['si_name'] = R.index.get_level_values('si_name') 

where si_name is the name of the subindex.

If you are using Spring MVC then you can try following steps.

import org.springframework.util.StringUtils;

List<String> groupIds = new List<String>;   
groupIds.add("a");    
groupIds.add("b");    
groupIds.add("c");

String csv = StringUtils.arrayToCommaDelimitedString(groupIds.toArray());

It will result to a,b,c

Did you set an appropriate security group for the instance? I.e. one that allows access from your network to port 22 on the instance. (By default all traffic is disallowed.)

Update: Ok, not a security group issue. But does the problem persist if you launch up another instance from the same AMI and try to access that? Maybe this particular EC2 instance just randomly failed somehow – it is only matter of time that something like that happens. (Recommended reading: Architecting for the Cloud: Best Practices (PDF), a paper by Jinesh Varia who is a web services evangelist at Amazon. See especially the section titled "Design for failure and nothing will fail".)

If you are looking for a more generalized way to apply to many columns, what you can do is to build a list of column names and pass it as the index of the grouped dataframe. In your case, for example:

columns = ['Y'+str(i) for year in range(1967, 2011)]

df.groupby('Country')[columns].agg('sum')

First open a console then cd to where you've downloaded your file like some-package.whl and use

pip install some-package.whl

Note: if pip.exe is not recognized, you may find it in the "Scripts" directory from where python has been installed. I have multiple Python installations, and needed to use the pip associated with Python 3 to install a version 3 wheel.

If pip is not installed, and you are using Windows: How to install pip on Windows?

You could try something like this:

...Binding="{Binding RelativeSource={RelativeSource FindAncestor, 
AncestorType={x:Type Window}}, Path=DataContext.AllowItemCommand}" ...

the method above is not that natural, after some googling I find a more nice solution , and no need of jQuery. see [1] and demo [2].

  var element = document.getElementById('uf-notice-ul');_x000D_
_x000D_
  var isMacWebkit = (navigator.userAgent.indexOf("Macintosh") !== -1 &&_x000D_
    navigator.userAgent.indexOf("WebKit") !== -1);_x000D_
  var isFirefox = (navigator.userAgent.indexOf("firefox") !== -1);_x000D_
_x000D_
  element.onwheel = wheelHandler; // Future browsers_x000D_
  element.onmousewheel = wheelHandler; // Most current browsers_x000D_
  if (isFirefox) {_x000D_
    element.scrollTop = 0;_x000D_
    element.addEventListener("DOMMouseScroll", wheelHandler, false);_x000D_
  }_x000D_
  // prevent from scrolling parrent elements_x000D_
  function wheelHandler(event) {_x000D_
    var e = event || window.event; // Standard or IE event object_x000D_
_x000D_
    // Extract the amount of rotation from the event object, looking_x000D_
    // for properties of a wheel event object, a mousewheel event object _x000D_
    // (in both its 2D and 1D forms), and the Firefox DOMMouseScroll event._x000D_
    // Scale the deltas so that one "click" toward the screen is 30 pixels._x000D_
    // If future browsers fire both "wheel" and "mousewheel" for the same_x000D_
    // event, we'll end up double-counting it here. Hopefully, however,_x000D_
    // cancelling the wheel event will prevent generation of mousewheel._x000D_
    var deltaX = e.deltaX * -30 || // wheel event_x000D_
      e.wheelDeltaX / 4 || // mousewheel_x000D_
      0; // property not defined_x000D_
    var deltaY = e.deltaY * -30 || // wheel event_x000D_
      e.wheelDeltaY / 4 || // mousewheel event in Webkit_x000D_
      (e.wheelDeltaY === undefined && // if there is no 2D property then _x000D_
        e.wheelDelta / 4) || // use the 1D wheel property_x000D_
      e.detail * -10 || // Firefox DOMMouseScroll event_x000D_
      0; // property not defined_x000D_
_x000D_
    // Most browsers generate one event with delta 120 per mousewheel click._x000D_
    // On Macs, however, the mousewheels seem to be velocity-sensitive and_x000D_
    // the delta values are often larger multiples of 120, at _x000D_
    // least with the Apple Mouse. Use browser-testing to defeat this._x000D_
    if (isMacWebkit) {_x000D_
      deltaX /= 30;_x000D_
      deltaY /= 30;_x000D_
    }_x000D_
    e.currentTarget.scrollTop -= deltaY;_x000D_
    // If we ever get a mousewheel or wheel event in (a future version of)_x000D_
    // Firefox, then we don't need DOMMouseScroll anymore._x000D_
    if (isFirefox && e.type !== "DOMMouseScroll") {_x000D_
      element.removeEventListener("DOMMouseScroll", wheelHandler, false);_x000D_
    }_x000D_
    // Don't let this event bubble. Prevent any default action._x000D_
    // This stops the browser from using the mousewheel event to scroll_x000D_
    // the document. Hopefully calling preventDefault() on a wheel event_x000D_
    // will also prevent the generation of a mousewheel event for the_x000D_
    // same rotation._x000D_
    if (e.preventDefault) e.preventDefault();_x000D_
    if (e.stopPropagation) e.stopPropagation();_x000D_
    e.cancelBubble = true; // IE events_x000D_
    e.returnValue = false; // IE events_x000D_
    return false;_x000D_
  }

[1] https://dimakuzmich.wordpress.com/2013/07/16/prevent-scrolling-of-parent-element-with-javascript/

[2] http://jsfiddle.net/dima_k/5mPkB/1/

Try using Response.SetCookie(), because Response.Cookies.Add() can cause multiple cookies to be added, whereas SetCookie will update an existing cookie.

Nope, no difference. It's just syntactic sugar. Arrays.asList(..) creates an additional list.

I had the same problem on a staging server. I had no issues running rake tasks on my local development machine, but deploying to the staging server failed with the "Could not find a JavaScript runtime" error message while trying to run the assets:precompile rake task.

Of course, therubyracer and execjs were in my Gemfile, and I was using the latest versions. My Gemfile.lock files matched, and I further verified versions by running bundle show.

After searching around on Google, I ended up deleting all of my gems and reinstalling them which fixed the problem. I still don't know what the root cause was, but maybe this will help you.

Here's what my environment looks like, BTW:

Ubuntu 10.04.3 LTS
rbenv
Ruby 1.9.2-p290
bundler-1.0.21
execjs-1.3.0
therubyracer-0.9.9

On Linux I use:

lsof -P -T -p Application_PID

This works better than ldd when the executable uses a non default loader

Just replace the "\n" with "".

In vi/Vim for every line in the document:

%s/>\n_/>_/g

If you want to confirm every replacement:

%s/>\n_/>_/gc

You can use JSON.stringify like:

JSON.stringify(new_tweets);

SYSDATETIME() and SYSUTCDATETIME()

are the DateTime2 equivalents of

GetDate() and GetUTCDate()

which return a DateTime.

DateTime2 is now the preferred method for storing the date and time in SQL Server 2008+. See the following StackOverflow Post.

dplyr >= 1.0.0

In addition to dplyr::rename in newer versions of dplyr is rename_with()

rename_with() renames columns using a function.

You can apply a function over a tidy-select set of columns using the .cols argument:

iris %>% 
  dplyr::rename_with(.fn = ~ gsub("^S", "s", .), .cols = where(is.numeric))

    sepal.Length sepal.Width Petal.Length Petal.Width    Species
1            5.1         3.5          1.4         0.2     setosa
2            4.9         3.0          1.4         0.2     setosa
3            4.7         3.2          1.3         0.2     setosa
4            4.6         3.1          1.5         0.2     setosa
5            5.0         3.6          1.4         0.2     setosa

I have created the following class and used across the application wherever required in place of GridView:

/// <summary>
/// Represents a view mode that displays data items in columns for a System.Windows.Controls.ListView control with auto sized columns based on the column content     
/// </summary>
public class AutoSizedGridView : GridView
{        
    protected override void PrepareItem(ListViewItem item)
    {
        foreach (GridViewColumn column in Columns)
        {
            // Setting NaN for the column width automatically determines the required
            // width enough to hold the content completely.

            // If the width is NaN, first set it to ActualWidth temporarily.
            if (double.IsNaN(column.Width))
              column.Width = column.ActualWidth;

            // Finally, set the column with to NaN. This raises the property change
            // event and re computes the width.
            column.Width = double.NaN;              
        }            
        base.PrepareItem(item);
    }
}

sys.argv[0] is not the first argument but the filename of the python program you are currently executing. I think you want sys.argv[1]

for me, the problem was from require('jquery-validation') i added in the begging of that js file which Validate method used which is necessary as an npm module

unfortunately, when web pack compiles the js files, they aren't in order, so that the validate method is before defining it! and the error comes

so better to use another js file for compiling this library or use local validate method file or even using CDN but in all cases make sure you attached jquery before

http://en.wikipedia.org/wiki/Post/Redirect/Get

The most common way to implement this pattern in ASP.Net is to use Response.Redirect(Request.RawUrl)

Consider the differences between Redirect and Transfer. Transfer really isn't telling the browser to forward to a clear form, it's simply returning a cleared form. That may or may not be what you want.

Response.Redirect() does not a waste round trip. If you post to a script that clears the form by Server.Transfer() and reload you will be asked to repost by most browsers since the last action was a HTTP POST. This may cause your users to unintentionally repeat some action, eg. place a second order which will have to be voided later.

Better use the project Cron in combination with the Linux cronjob for this task. It allows you to configure run times in your PHP Code, support background jobs and is easy to use.

First step call a PHP Script every minute:

* * * * * /usr/local/bin/run.php &> /dev/null

Second Step use the cron/cron Package to configure run times directly in PHP.

$deprecatedStatus = new ShellJob();
$deprecatedStatus->setCommand('cd /app && /usr/local/bin/php cron/updateDeprecatedStatus.php');
$deprecatedStatus->setSchedule(new CrontabSchedule('* * * * */2'));


$displayDate = new ShellJob();
$displayDate->setCommand('cd /app && /usr/local/bin/php cron/updateDisplayDate.php');
$displayDate->setSchedule(new CrontabSchedule('* * * * */5'));

You found the details how to use in the linked repository.

You need to add the "global" flag to your regex:

s.replace(new RegExp("[0-9]", "g"), "X")

or, perhaps prettier, using the built-in literal regexp syntax:

.replace(/[0-9]/g, "X")

You need to change your code as below:

<html>
<body>

<span id="span_Id">Click the button to display the content.</span>

<button onclick="displayDate()">Click Me</button>

<script>
function displayDate() {
   var span_Text = document.getElementById("span_Id").innerText;
   alert (span_Text);
}
</script>
</body>
</html>

You can use CSS to make a line with a different color, example would be like that:

border-left: 1px solid rgb(216, 216, 216);
border-right: medium none;
border-width: medium medium medium 2px;
border-style: none none none solid;
border-color: -moz-use-text-color -moz-use-text-color -moz-use-text-color rgb(216, 216, 216);

that code will display vertical grey line.

None of the other answers here worked for me, possibly from trying a combination of all of them. I was able to adapt this accepted answer to work with meld. This is now working for me with git 1.9.4, meld 3.14.0, and windows 8.1.

Edit ~/.gitconfig to look like:

[diff]
    tool = meld
    guitool = meld
[mergetool "meld"]
    path = c:/Program Files (x86)/Meld/Meld.exe
[difftool "meld"]
    path = c:/Program Files (x86)/Meld/Meld.exe

Probably svn import would be the best option around. Check out Getting Data into Your Repository (in Version Control with Subversion, For Subversion).

The svn import command is a quick way to copy an unversioned tree of files into a repository, creating intermediate directories as necessary. svn import doesn't require a working copy, and your files are immediately committed to the repository. You typically use this when you have an existing tree of files that you want to begin tracking in your Subversion repository. For example:

$ svn import /path/to/mytree \
             http://svn.example.com/svn/repo/some/project \
             -m "Initial import"
Adding         mytree/foo.c
Adding         mytree/bar.c
Adding         mytree/subdir
Adding         mytree/subdir/quux.h

Committed revision 1.
$

The previous example copied the contents of the local directory mytree into the directory some/project in the repository. Note that you didn't have to create that new directory first—svn import does that for you. Immediately after the commit, you can see your data in the repository:

$ svn list http://svn.example.com/svn/repo/some/project
bar.c
foo.c
subdir/
$

Note that after the import is finished, the original local directory is not converted into a working copy. To begin working on that data in a versioned fashion, you still need to create a fresh working copy of that tree.

Note: if you are on the same machine as the Subversion repository you can use the file:// specifier with a path rather than the https:// with a URL specifier.

In XML

 <androidx.appcompat.widget.Toolbar
  android:id="@+id/main_toolbar"
  android:layout_width="match_parent"
  android:layout_height="?attr/actionBarSize"
  app:layout_scrollFlags="scroll|enterAlways">
 </androidx.appcompat.widget.Toolbar>

Kotlin: In fragment.kt -> onCreateView()

setHasOptionsMenu(true)

val toolbar = view.findViewById<Toolbar>(R.id.main_toolbar)

(activity as? AppCompatActivity)?.setSupportActionBar(toolbar)

(activity as? AppCompatActivity)?.supportActionBar?.show()

-> onCreateOptionsMenu()

   override fun onCreateOptionsMenu(menu: Menu, inflater: MenuInflater) {
       inflater.inflate(R.menu.app_main_menu,menu)
       super.onCreateOptionsMenu(menu, inflater)
   }

->onOptionsItemSelected()

   override fun onOptionsItemSelected(item: MenuItem): Boolean {
        return when (item.itemId) {
             R.id.selected_id->{//to_do}
             else -> super.onOptionsItemSelected(item)
        }
    }

I don't know if it is possible in XAML-only but try the following:

Give your ComboBox a name so you can access it in the codebehind: "typesComboBox1"

Now try the following

typesComboBox1.ItemsSource = Enum.GetValues(typeof(ExampleEnum));

Android Studio is based on IntelliJ, and it comes with support for SVN (along with git and mercurial) bundled in. Check http://www.jetbrains.com/idea/features/version_control.html for more info.

You can easily change the match-type to 1 when you are looking for the greatest value or to -1 when looking for the smallest value.

You can do this by creating a constraint and connecting it via interface builder

See explanation: Auto_Layout_Constraints_in_Interface_Builder

raywenderlich beginning-auto-layout

AutolayoutPG Articles constraint Fundamentals

@interface ViewController : UIViewController {
    IBOutlet NSLayoutConstraint *leadingSpaceConstraint;
    IBOutlet NSLayoutConstraint *topSpaceConstraint;
}
@property (weak, nonatomic) IBOutlet NSLayoutConstraint *leadingSpaceConstraint;

connect this Constraint outlet with your sub views Constraint or connect super views Constraint too and set it according to your requirements like this

 self.leadingSpaceConstraint.constant = 10.0;//whatever you want to assign

I hope this clarifies it.

The $.fn.equals(...) solution is probably the cleanest and most elegant one.

I have tried something quick and dirty like this:

JSON.stringify(a) == JSON.stringify(b)

It is probably expensive, but the comfortable thing is that it is implicitly recursive, while the elegant solution is not.

Just my 2 cents.

I was also having the same issue with Spring Boot and embedded Tomcat.

From what I understand these properties only set the Tomcat configuration parameters. According to the Tomcat documentation this is only used for Client authentication (i.e. for two-way SSL) and not for verifying remote certificates:

truststoreFile - The trust store file to use to validate client certificates.

https://tomcat.apache.org/tomcat-8.0-doc/config/http.html

In order to configure the trust store for HttpClient it largely depends on the HttpClient implementation you use. For instance for RestTemplate by default Spring Boot uses a SimpleClientHttpRequestFactory based on standard J2SE classes like java.net.HttpURLConnection.

I've come up with a solution based on the Apache HttpClient docs and these posts: http://vincentdevillers.blogspot.pt/2013/02/configure-best-spring-resttemplate.html http://literatejava.com/networks/ignore-ssl-certificate-errors-apache-httpclient-4-4/

Basically this allows for a RestTemplate bean that only trusts certificates signed by the root CA in the configured truststore.

@Configuration
public class RestClientConfig {

    // e.g. Add http.client.ssl.trust-store=classpath:ssl/truststore.jks to application.properties
    @Value("${http.client.ssl.trust-store}")
    private Resource trustStore;

    @Value("${http.client.ssl.trust-store-password}")
    private char[] trustStorePassword;

    @Value("${http.client.maxPoolSize}")
    private Integer maxPoolSize;


    @Bean
    public ClientHttpRequestFactory httpRequestFactory() {
        return new HttpComponentsClientHttpRequestFactory(httpClient());
    }

    @Bean
    public HttpClient httpClient() {

        // Trust own CA and all child certs
        Registry<ConnectionSocketFactory> socketFactoryRegistry = null;
        try {
            SSLContext sslContext = SSLContexts
                    .custom()
                    .loadTrustMaterial(trustStore.getFile(),
                            trustStorePassword)
                    .build();

            // Since only our own certs are trusted, hostname verification is probably safe to bypass
            SSLConnectionSocketFactory sslSocketFactory = new SSLConnectionSocketFactory(sslContext,
                    new HostnameVerifier() {

                        @Override
                        public boolean verify(final String hostname,
                                final SSLSession session) {
                            return true;
                        }
            });

            socketFactoryRegistry = RegistryBuilder.<ConnectionSocketFactory>create()
                    .register("http", PlainConnectionSocketFactory.getSocketFactory())
                    .register("https", sslSocketFactory)
                    .build();           

        } catch (Exception e) {
            //TODO: handle exceptions
            e.printStackTrace();
        }

        PoolingHttpClientConnectionManager connectionManager = new PoolingHttpClientConnectionManager(socketFactoryRegistry);
        connectionManager.setMaxTotal(maxPoolSize);
        // This client is for internal connections so only one route is expected
        connectionManager.setDefaultMaxPerRoute(maxPoolSize);
        return HttpClientBuilder.create()
                .setConnectionManager(connectionManager)
                .disableCookieManagement()
                .disableAuthCaching()
                .build();
    }

    @Bean
    public RestTemplate restTemplate() {
        RestTemplate restTemplate = new RestTemplate();
        restTemplate.setRequestFactory(httpRequestFactory());
        return restTemplate;
    }    
}

And then you can use this custom Rest client whenever you need to, e.g.:

@Autowired
private RestTemplate restTemplate;

restTemplate.getForEntity(...)

This assumes your trying to connect to a Rest endpoint, but you can also use the above HttpClient bean for whatever you want.

I personally use an about:blank src and deal with the broken image icon by setting the opacity of the img element to 0.

LLVM (used to mean "Low Level Virtual Machine" but not anymore) is a compiler infrastructure, written in C++, which is designed for compile-time, link-time, run-time, and "idle-time" optimization of programs written in arbitrary programming languages. Originally implemented for C/C++, the language-independent design (and the success) of LLVM has since spawned a wide variety of front-ends, including Objective C, Fortran, Ada, Haskell, Java bytecode, Python, Ruby, ActionScript, GLSL, and others.

Read this for more explanation
Also check out Unladen Swallow

Simply apply aggregation function, Sum on your column

df.groupby('steps').sum().show()

Follow the Documentation http://spark.apache.org/docs/2.1.0/api/python/pyspark.sql.html

Check out this link also https://www.analyticsvidhya.com/blog/2016/10/spark-dataframe-and-operations/

HTML :

<div class="span4">
  <div class="panel panel-primary">
    <div class="panel-heading">jhdsahfjhdfhs</div>
    <div class="panel-body panel-height">fdoinfds sdofjohisdfj</div>
  </div>
</div>

CSS :

.panel-height {
  height: 100px; / change according to your requirement/
}

You expose ports using the EXPOSE keyword in the Dockerfile or the --expose flag to docker run. Exposing ports is a way of documenting which ports are used, but does not actually map or open any ports. Exposing ports is optional.

Source: github commit

DateTime has a Subtract method and an overloaded - operator for just such an occasion:

DateTime now = DateTime.UtcNow;
TimeSpan difference = now.Subtract(otherTime); // could also write `now - otherTime`
if (difference.TotalSeconds > 5) { ... }

use mydb
db.createUser( { user: "test", pwd: "secret", roles: [ "readWrite", "dbAdmin"],passwordDigestor:"server" } )

<?php
//None HttpOnly cookie:
setcookie("abc", "test", NULL, NULL, NULL, NULL, FALSE); 

//HttpOnly cookie:
setcookie("abc", "test", NULL, NULL, NULL, NULL, TRUE); 

?>

Source

Kyle's solution worked perfectly fine for me so I made my research in order to avoid any Js and CSS, but just sticking with HTML. Adding a value of selected to the item we want to appear as a header forces it to show in the first place as a placeholder. Something like:

<option selected disabled>Choose here</option>

The complete markup should be along these lines:

<select>
    <option selected disabled>Choose here</option>
    <option value="1">One</option>
    <option value="2">Two</option>
    <option value="3">Three</option>
    <option value="4">Four</option>
    <option value="5">Five</option>
</select>

You can take a look at this fiddle, and here's the result:

If you do not want the sort of placeholder text to appear listed in the options once a user clicks on the select box just add the hidden attribute like so:

<select>
    <option selected disabled hidden>Choose here</option>
    <option value="1">One</option>
    <option value="2">Two</option>
    <option value="3">Three</option>
    <option value="4">Four</option>
    <option value="5">Five</option>
</select>

Check the fiddle here and the screenshot below.

Here is the solution:

<select>
    <option style="display:none;" selected>Select language</option>
    <option>Option 1</option>
    <option>Option 2</option>
</select>

Follow this steps :

1. Update your MsTest.TestAdapter and MsTest.TestFramework dll's from nugget package manager.
2. Clean your solution
3. Build your solution.

I am using mysql and below syntax worked well for me,

ALTER TABLE table_name MODIFY col_name VARCHAR(12);

Took some searching and reading to find a method that suited my situation, on form submit, run ajax to a remote php script, on success/failure inform user, on complete clear the form.

I had some default values, all other methods involved .val('') thereby not resetting but clearing the form.

I got this too work by adding a reset button to the form, which had an id of myform:

$("#myform > input[type=reset]").trigger('click');

This for me had the correct outcome on resetting the form, oh and dont forget the

event.preventDefault();

to stop the form submitting in browser, like I did :).

Regards

Jacko

>>> A           = [6, 7, 8, 9, 10, 11, 12]
>>> subset_of_A  = [6, 9, 12];
>>> set(A) - set(subset_of_A)
set([8, 10, 11, 7])
>>> 

You need to understand the content in M2E_plugin_execution_not_covered and follow the steps mentioned below:

• Pick org.eclipse.m2e.lifecyclemapping.defaults jar from the eclipse plugin folder
• Extract it and open lifecycle-mapping-metadata.xml where you can find all the pluginExecutions.
• Add the pluginExecutions of your plugins which are shown as errors with <ignore/> under <action> tags.

eg: for write-project-properties error, add this snippet under the <pluginExecutions> section of the lifecycle-mapping-metadata.xml file:

 <pluginExecution>
    <pluginExecutionFilter>
       <groupId>org.codehaus.mojo</groupId>
       <artifactId>properties-maven-plugin</artifactId>
       <versionRange>1.0-alpha-2</versionRange>
       <goals>
         <goal>write-project-properties</goal>
       </goals>
    </pluginExecutionFilter>
     <action>
       <ignore />
     </action>
   </pluginExecution>

• Replace that XML file in the JAR
• Replace the updated JAR in Eclipse's plugin folder
• Restart Eclipse

You should see no errors in the future for any project.

*args just means that the function takes a number of arguments, generally of the same type.

Check out this section in the Python tutorial for more info.

thatLine = thatLine.replace('\n', '<br />')

str.replace() returns a copy of the string, it doesn't modify the string you pass in.

Its very easy to do that, react-router-dom provides all.

import React from 'react';_x000D_
import { matchPath, withRouter } from 'react-router';_x000D_
    _x000D_
class NavBar extends React.Component {_x000D_
  render(){_x000D_
    return(_x000D_
       <ul className="sidebar-menu">_x000D_
      <li className="header">MAIN NAVIGATION</li>_x000D_
      <li className={matchPath(this.props.location.pathname, { path: "/dashboard" }) ? 'active' : ''}><Link to="dashboard"><i className="fa fa-dashboard"></i> _x000D_
        <span>Dashboard</span></Link></li>_x000D_
      <li className={matchPath(this.props.location.pathname, { path: "/email_lists" }) ? 'active' : ''}><Link to="email_lists"><i className="fa fa-envelope-o"></i> _x000D_
        <span>Email Lists</span></Link></li>_x000D_
      <li className={matchPath(this.props.location.pathname, { path: "/billing" }) ? 'active' : ''}><Link to="billing"><i className="fa fa-credit-card"></i> _x000D_
        <span>Buy Verifications</span></Link></li>_x000D_
    </ul>_x000D_
      )_x000D_
   }_x000D_
}_x000D_
    _x000D_
export default withRouter(NavBar);

Wrapping You Navigation Component with withRouter() HOC will provide few props to your component: 1. match 2. history 3. location

here i used matchPath() method from react-router to compare the paths and decide if the 'li' tag should get "active" class name or not. and Im accessing the location from this.props.location.pathname.

changing the path name in props will happen when our link is clicked, and location props will get updated NavBar also get re-rendered and active style will get applied

You can find the process id of the attached running screen. I found it same as the session id which you can get by command:
screen -ls
And you can use following command to kill that process:
kill [sessionId] or
sudo kill [sessionId]

You can do it in a hackish way. Careful using the sqlcmd hack. If the data has double quotes or commas you will run into trouble.

You can use a simple script to do it properly:

'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
' Data Exporter                                                 '
'                                                               '
' Description: Allows the output of data to CSV file from a SQL '
'       statement to either Oracle, SQL Server, or MySQL        '
' Author: C. Peter Chen, http://dev-notes.com                   '
' Version Tracker:                                              '
'       1.0   20080414 Original version                         '
'   1.1   20080807 Added email functionality                '
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
option explicit
dim dbType, dbHost, dbName, dbUser, dbPass, outputFile, email, subj, body, smtp, smtpPort, sqlstr

'''''''''''''''''
' Configuration '
'''''''''''''''''
dbType = "oracle"                 ' Valid values: "oracle", "sqlserver", "mysql"
dbHost = "dbhost"                 ' Hostname of the database server
dbName = "dbname"                 ' Name of the database/SID
dbUser = "username"               ' Name of the user
dbPass = "password"               ' Password of the above-named user
outputFile = "c:\output.csv"      ' Path and file name of the output CSV file
email = "[email protected]"           ' Enter email here should you wish to email the CSV file (as attachment); if no email, leave it as empty string ""
  subj = "Email Subject"          ' The subject of your email; required only if you send the CSV over email
  body = "Put a message here!"    ' The body of your email; required only if you send the CSV over email
  smtp = "mail.server.com"        ' Name of your SMTP server; required only if you send the CSV over email
  smtpPort = 25                   ' SMTP port used by your server, usually 25; required only if you send the CSV over email
sqlStr = "select user from dual"  ' SQL statement you wish to execute
'''''''''''''''''''''
' End Configuration '
'''''''''''''''''''''



dim fso, conn

'Create filesystem object 
set fso = CreateObject("Scripting.FileSystemObject")

'Database connection info
set Conn = CreateObject("ADODB.connection")
Conn.ConnectionTimeout = 30
Conn.CommandTimeout = 30
if dbType = "oracle" then
    conn.open("Provider=MSDAORA.1;User ID=" & dbUser & ";Password=" & dbPass & ";Data Source=" & dbName & ";Persist Security Info=False")
elseif dbType = "sqlserver" then
    conn.open("Driver={SQL Server};Server=" & dbHost & ";Database=" & dbName & ";Uid=" & dbUser & ";Pwd=" & dbPass & ";")
elseif dbType = "mysql" then
    conn.open("DRIVER={MySQL ODBC 3.51 Driver}; SERVER=" & dbHost & ";PORT=3306;DATABASE=" & dbName & "; UID=" & dbUser & "; PASSWORD=" & dbPass & "; OPTION=3")
end if

' Subprocedure to generate data.  Two parameters:
'   1. fPath=where to create the file
'   2. sqlstr=the database query
sub MakeDataFile(fPath, sqlstr)
    dim a, showList, intcount
    set a = fso.createtextfile(fPath)

    set showList = conn.execute(sqlstr)
    for intcount = 0 to showList.fields.count -1
        if intcount <> showList.fields.count-1 then
            a.write """" & showList.fields(intcount).name & ""","
        else
            a.write """" & showList.fields(intcount).name & """"
        end if
    next
    a.writeline ""

    do while not showList.eof
        for intcount = 0 to showList.fields.count - 1
            if intcount <> showList.fields.count - 1 then
                a.write """" & showList.fields(intcount).value & ""","
            else
                a.write """" & showList.fields(intcount).value & """"
            end if
        next
        a.writeline ""
        showList.movenext
    loop
    showList.close
    set showList = nothing

    set a = nothing
end sub

' Call the subprocedure
call MakeDataFile(outputFile,sqlstr)

' Close
set fso = nothing
conn.close
set conn = nothing

if email <> "" then
    dim objMessage
    Set objMessage = CreateObject("CDO.Message")
    objMessage.Subject = "Test Email from vbs"
    objMessage.From = email
    objMessage.To = email
    objMessage.TextBody = "Please see attached file."
    objMessage.AddAttachment outputFile

    objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
    objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserver") = smtp
    objMessage.Configuration.Fields.Item ("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = smtpPort

objMessage.Configuration.Fields.Update

    objMessage.Send
end if

'You're all done!!  Enjoy the file created.
msgbox("Data Writer Done!")

^{Source: Writing SQL output to CSV with VBScript.}

Instead of writing out values consider using fputcsv().

This may solve your problem immediately.

Converting LocalDateTime to java.util.Date

    LocalDateTime localDateTime = LocalDateTime.now();

    ZonedDateTime zonedDateTime = localDateTime.atZone(ZoneOffset.systemDefault());

    Instant instant = zonedDateTime.toInstant();

    Date date = Date.from(instant);

System.out.println("Result Date is : "+date);

'SET' is forgotten

ALTER TABLE ONLY users ALTER COLUMN lang SET DEFAULT 'en_GB';

From the menu:

Build|Generate Signed APK

or

Build|Build APK

(the latter if you don't need a signed one to publish to the Play Store)

#menu li { padding: 0px; }
#menu li a { margin: 0px; display: block; width: 100%; height: 100%; }

It may need some tweaking for IE6, but that's about how you do it.

This is what I've used recently.

CSS

div#tabs p{display:none;}

div#tabs p.tab1:target {display:block;}
div#tabs p.tab2:target {display:block;}
div#tabs p.tab3:target {display:block;}

HTML

<div id='tabs'>
  <h2 class="nav-tab-wrapper">
    <a href="#tab1" class="nav-tab tab1">Pages</a>
    <a href="#tab2" class="nav-tab nav-tab-active tab2">Email</a>
    <a href="#tab3" class="nav-tab tab3">Support</a>
  </h2>

  <p id='tab1' class='tab1'>Awesome tab1 stuff</p>
  <p id='tab2' class='tab2'>Tab2 stuff</p>
  <p id='tab3' class='tab3'>Tab3 stuff</p>

</div>

https://jsfiddle.net/hoq0djwc/1/

Hope it helps somewhere.

RFID Standards:

• 125 Khz (low-frequency) tags are write-once/read-many, and usually only contain a small (permanent) unique identification number.

• 13.56 Mhz (high-frequency) tags are usually read/write, they can typically store about 1 to 2 kilbytes of data in addition to their preset (permanent) unique ID number.

• 860-960 Mhz (ultra-high-frequency) tags are typically read/write and can have much larger information storage capacity (I think that 64 KB is the highest currently available for passive tags) in addition to their preset (permanent) unique ID number.
  
  

More Information

Most read/write tags can be locked to prevent further writing to specific data-blocks in the tag's internal memory, while leaving other blocks unlocked. Different tag manufacturers make their tags differently, though.

Depending on your intended application, you might have to program your own microcontroller to interface with an embedded RFID read/write module using a manufacturer-specific protocol. That's certainly a lot cheaper than buying a complete RFID read/write unit, as they can cost several thousand dollars. With a custom solution, you can build you own unit that does specifically what you want for as little as $200.

Links

RFID Journal

RFID Toys (Book) Website

SkyTek - RFID reader manufacturing company (you can buy their products through third-party retailers & wholesalers like Mouser)

Trossen Robotics - You can buy RFID tags and readers (125 Khz & 13.56 Mhz) from here, among other things

A nice and simple option that worked for me was:

<a href="javascript: false" onClick={this.handlerName}>Click Me</a>

To get the last modification date/time of a file in a locale-independent manner you could use the wmic command with the DataFile alias:

wmic DataFile where "Name='D:\\Path\\To\\myfile.txt'" get LastModified /VALUE

Regard that the full path to the file must be provided and that all path separators (backslashes \) must be doubled herein.

This returns a standardised date/time value like this (meaning 12^th of August 2019, 13:00:00, UTC + 120'):

LastModified=20190812130000.000000+120

To capture the date/time value use for /F, then you can assign it to a variable using set:

for /F "delims=" %%I in ('
    wmic DataFile where "Name='D:\\Path\\To\\myfile.txt'" get LastModified /VALUE
') do for /F "tokens=1* delims==" %%J in ("%%I") do set "DateTime=%%K"

The second for /F loop avoids artefacts (like orphaned carriage-return characters) from conversion of the Unicode output of wmic to ASCII/ANSI text by the first for /F loop (see also this answer).

You can then use sub-string expansion to extract the pure date or the time from this:

set "DateOnly=%DateTime:~0,8%"
set "TimeOnly=%DateTime:~8,6%"

To get the creation date/time or the last access date/time, just replace the property LastModified by CreationDate or LastAccessed, respectively. To get information about a directory rather than a file, use the alias FSDir instead of DataFile.

For specifying file (or directory) paths/names containing both , and ), which are usually not accepted by wmic, take a look at this question.

Check out also this post as well as this one about how to get file and directory date/time stamps.

Python has the syntactical requirement that code blocks (after if, except, def, class etc.) cannot be empty. Empty code blocks are however useful in a variety of different contexts, such as in examples below, which are the most frequent use cases I have seen.

Therefore, if nothing is supposed to happen in a code block, a pass is needed for such a block to not produce an IndentationError. Alternatively, any statement (including just a term to be evaluated, like the Ellipsis literal ... or a string, most often a docstring) can be used, but the pass makes clear that indeed nothing is supposed to happen, and does not need to be actually evaluated and (at least temporarily) stored in memory.

• Ignoring (all or) a certain type of Exception (example from xml):

  try:
      self.version = "Expat %d.%d.%d" % expat.version_info
  except AttributeError:
      pass # unknown
  

  Note: Ignoring all types of raises, as in the following example from pandas, is generally considered bad practice, because it also catches exceptions that should probably be passed on to the caller, e.g. KeyboardInterrupt or SystemExit (or even HardwareIsOnFireError – How do you know you aren't running on a custom box with specific errors defined, which some calling application would want to know about?).

  try:
      os.unlink(filename_larry)
  except:
      pass
  

  Instead using at least except Error: or in this case preferably except OSError: is considered much better practice. A quick analysis of all python modules I have installed gave me that more than 10% of all except ...: pass statements catch all exceptions, so it's still a frequent pattern in python programming.

• Deriving an exception class that does not add new behaviour (e.g. in scipy):

  class CompileError(Exception):
      pass
  

  Similarly, classes intended as abstract base class often have an explicit empty __init__ or other methods that subclasses are supposed to derive. (e.g. pebl)

  class _BaseSubmittingController(_BaseController):
      def submit(self, tasks): pass
      def retrieve(self, deferred_results): pass
  

• Testing that code runs properly for a few test values, without caring about the results (from mpmath):

  for x, error in MDNewton(mp, f, (1,-2), verbose=0,
                           norm=lambda x: norm(x, inf)):
      pass
  

• In class or function definitions, often a docstring is already in place as the obligatory statement to be executed as the only thing in the block. In such cases, the block may contain pass in addition to the docstring in order to say “This is indeed intended to do nothing.”, for example in pebl:

  class ParsingError(Exception): 
      """Error encountered while parsing an ill-formed datafile."""
      pass
  

• In some cases, pass is used as a placeholder to say “This method/class/if-block/... has not been implemented yet, but this will be the place to do it”, although I personally prefer the Ellipsis literal ... in order to strictly differentiate between this and the intentional “no-op” in the previous example. (Note that the Ellipsis literal is a valid expression only in Python 3)
  For example, if I write a model in broad strokes, I might write

  def update_agent(agent):
      ... 
  

  where others might have

  def update_agent(agent):
      pass
  

  before

  def time_step(agents):
      for agent in agents:
          update_agent(agent)
  

  as a reminder to fill in the update_agent function at a later point, but run some tests already to see if the rest of the code behaves as intended. (A third option for this case is raise NotImplementedError. This is useful in particular for two cases: Either “This abstract method should be implemented by every subclass, there is no generic way to define it in this base class”, or “This function, with this name, is not yet implemented in this release, but this is what its signature will look like”)

If you are able to install a package, I'd recommend trying dill, which worked just fine for my project. A nice thing about this package is that it has the same interface as pickle, so if you have already been using pickle in your project you can simply substitute in dill and see if the script runs, without changing any code. So it is a very cheap solution to try!

(Full anti-disclosure: I am in no way affiliated with and have never contributed to the dill project.)

Install the package:

pip install dill

Then edit your code to import dill instead of pickle:

# import pickle
import dill as pickle

Run your script and see if it works. (If it does you may want to clean up your code so that you are no longer shadowing the pickle module name!)

Some specifics on datatypes that dill can and cannot serialize, from the project page:

dill can pickle the following standard types:

none, type, bool, int, long, float, complex, str, unicode, tuple, list, dict, file, buffer, builtin, both old and new style classes, instances of old and new style classes, set, frozenset, array, functions, exceptions

dill can also pickle more ‘exotic’ standard types:

functions with yields, nested functions, lambdas, cell, method, unboundmethod, module, code, methodwrapper, dictproxy, methoddescriptor, getsetdescriptor, memberdescriptor, wrapperdescriptor, xrange, slice, notimplemented, ellipsis, quit

dill cannot yet pickle these standard types:

frame, generator, traceback

Using performance.now():

var t0 = performance.now()

doSomething()   // <---- The function you're measuring time for 

var t1 = performance.now()
console.log("Call to doSomething took " + (t1 - t0) + " milliseconds.")

NodeJs: it is required to import the performance class

Using console.time: (non-standard) (living standard)

console.time('someFunction')

someFunction() // Whatever is timed goes between the two "console.time"

console.timeEnd('someFunction')

Note:
The string being pass to the time() and timeEnd() methods must match
(for the timer to finish as expected).

console.time() documentations:

1. NodeJS documentation regarding
2. MDN (client-side) documentation

Edit: I noticed that some people are cutting and pasting the invocation here. The answer I originally gave was relevant for the OP only. Here's a more modern invocation style (including using the more conventional port of 8000):

java -agentlib:jdwp=transport=dt_socket,server=y,address=8000,suspend=n <other arguments>

Original answer follows.

Try this:

java -Xdebug -Xrunjdwp:server=y,transport=dt_socket,address=4000,suspend=n myapp

Two points here:

1. No spaces in the runjdwp option.
2. Options come before the class name. Any arguments you have after the class name are arguments to your program!

Pipe the result to wc using the -l (line count) switch:

grep -Rl "curl" ./ | wc -l

In recent versions of jQuery, setting "dataType" to an appropriate value also sets the accepts header. For instance, dataType: "json" sets the accept header to Accept: application/json, text/javascript, */*; q=0.01.

It might be a good idea to use an IP address geo location service as a fallback method when getCurrentPosition fails. For example with our api https://ip-api.io

$.getJSON("http://ip-api.io/json/",
    function(result) {
        console.log(result);
    });

Without @Transactional annotation you can achieve the same goal with finding the entity from the DB and then removing that entity you got from the DB.

CrudRepositor -> void delete(T var1);

$userRecord = Model::where([['email','=',$email],['password','=', $password]])->first();

or

$userRecord = self::where([['email','=',$email],['password','=', $password]])->first();

I` think this condition is better then 2 where. Its where condition array in array of where conditions;

it is worth mentioning smart-open that uses boto3 as a back-end.

smart-open is a drop-in replacement for python's open that can open files from s3, as well as ftp, http and many other protocols.

for example

from smart_open import open
import json
with open("s3://your_bucket/your_key.json", 'r') as f:
    data = json.load(f)

The aws credentials are loaded via boto3 credentials, usually a file in the ~/.aws/ dir or an environment variable.

Edit: (after the code change)
There is no way for us to tell you whether you need or not to call your parent's __init__ (or any other function). Inheritance obviously would work without such call. It all depends on the logic of your code: for example, if all your __init__ is done in parent class, you can just skip child-class __init__ altogether.

consider the following example:

>>> class A:
    def __init__(self, val):
        self.a = val


>>> class B(A):
    pass

>>> class C(A):
    def __init__(self, val):
        A.__init__(self, val)
        self.a += val


>>> A(4).a
4
>>> B(5).a
5
>>> C(6).a
12

Search based solutions (*, /...) move cursor, which may be unfortunate.

An alternative is to use enhanced mark.vim plugin, then complete your .vimrc to let double-click trigger highlighting (I don't know how a keyboard selection may trigger a command) :

"Use Mark plugin to highlight selected word  
map <2-leftmouse> \m   

It allows multiple highlightings, persistence, etc.

To remove highlighting, either :

• Double click again
• :Mark (switch off until next selection)
• :MarkClear

My solution (VS 2013) was to run as an administrator

This worked for me:

line-height: 80%;

It's safe to just delete the source directory and compiled package file. Find the source directory under $GOPATH/src and the package file under $GOPATH/pkg/<architecture>, for example: $GOPATH/pkg/windows_amd64.

Try:

bash -c '[ -d my_mystery_dirname ] && run_this_command'

This will work if you can run bash on the remote machine....

In bash, [ -d something ] checks if there is directory called 'something', returning a success code if it exists and is a directory. Chaining commands with && runs the second command only if the first one succeeded. So [ -d somedir ] && command runs the command only if the directory exists.

This style:

table tr td { border: 1px solid red; }
td table tr td { border: none; }

gives me:

this http://img12.imageshack.us/img12/4477/borders.png

However, using a class is probably the right approach here.

In addition to existing answers it is often desired to format the REST output (typically JSON and XML lacks indentation). Try this:

$ curl https://api.twitter.com/1/help/configuration.xml  | xmllint --format -
$ curl https://api.twitter.com/1/help/configuration.json | python -mjson.tool

Tested on Ubuntu 11.0.4/11.10.

Another issue is the desired content type. Twitter uses .xml/.json extension, but more idiomatic REST would require Accept header:

$ curl -H "Accept: application/json"

Given your example, you need to add the following import in your main.main class:

import second.second;

Some bonus advice, make sure you titlecase your class names as that is a Java standard. So your example Main class will have the structure:

package main;  //lowercase package names
public class Main //titlecase class names
{
    //Main class content
}

If the URL works fine in the web browser on the same machine, it might be that the Java code isn't using the HTTP proxy the browser is using for connecting to the URL.

You could try to wiggle down the nesting by implementing parallel workers (like in cluster computing) instead of increasing the number of nesting function calls.

For example: you define a limited number of slots (eg. 100) and monitor the number of "workers" assigned to each/some of them. If any slots become free, you put the waiting workers "in them".

I know this is an old question, but I'm going to answer it because I have to disagree with all the answers here.

Now, I'll agree that most of the time you either want to do a plain throw, to preserve as much information as possible about what went wrong, or you want to throw a new exception that may contain that as an inner-exception, or not, depending on how likely you are to want to know about the inner events that caused it.

There is an exception though. There are several cases where a method will call into another method and a condition that causes an exception in the inner call should be considered the same exception on the outer call.

One example is a specialised collection implemented by using another collection. Let's say it's a DistinctList<T> that wraps a List<T> but refuses duplicate items.

If someone called ICollection<T>.CopyTo on your collection class, it might just be a straight call to CopyTo on the inner collection (if say, all the custom logic only applied to adding to the collection, or setting it up). Now, the conditions in which that call would throw are exactly the same conditions in which your collection should throw to match the documentation of ICollection<T>.CopyTo.

Now, you could just not catch the execption at all, and let it pass through. Here though the user gets an exception from List<T> when they were calling something on a DistinctList<T>. Not the end of the world, but you may want to hide those implementation details.

Or you could do your own checking:

public CopyTo(T[] array, int arrayIndex)
{
  if(array == null)
    throw new ArgumentNullException("array");
  if(arrayIndex < 0)
    throw new ArgumentOutOfRangeException("arrayIndex", "Array Index must be zero or greater.");
  if(Count > array.Length + arrayIndex)
    throw new ArgumentException("Not enough room in array to copy elements starting at index given.");
  _innerList.CopyTo(array, arrayIndex);
}

That's not the worse code because it's boilerplate and we can probably just copy it from some other implementation of CopyTo where it wasn't a simple pass-through and we had to implement it ourselves. Still, it's needlessly repeating the exact same checks that are going to be done in _innerList.CopyTo(array, arrayIndex), so the only thing it has added to our code is 6 lines where there could be a bug.

We could check and wrap:

public CopyTo(T[] array, int arrayIndex)
{
  try
  {
    _innerList.CopyTo(array, arrayIndex);
  }
  catch(ArgumentNullException ane)
  {
    throw new ArgumentNullException("array", ane);
  }
  catch(ArgumentOutOfRangeException aore)
  {
    throw new ArgumentOutOfRangeException("Array Index must be zero or greater.", aore);
  }
  catch(ArgumentException ae)
  {
    throw new ArgumentException("Not enough room in array to copy elements starting at index given.", ae);
  }
}

In terms of new code added that could potentially be buggy, this is even worse. And we don't gain a thing from the inner exceptions. If we pass a null array to this method and receive an ArgumentNullException, we're not going to learn anything by examining the inner exception and learning that a call to _innerList.CopyTo was passed a null array and threw an ArgumentNullException.

Here, we can do everything we want with:

public CopyTo(T[] array, int arrayIndex)
{
  try
  {
    _innerList.CopyTo(array, arrayIndex);
  }
  catch(ArgumentException ae)
  {
    throw ae;
  }
}

Every one of the exceptions that we expect to have to throw if the user calls it with incorrect arguments, will correctly be thrown by that re-throw. If there's a bug in the logic used here, it's in one of two lines - either we were wrong in deciding this was a case where this approach works, or we were wrong in having ArgumentException as the exception type looked for. It's the only two bugs that the catch block can possibly have.

Now. I still agree that most of the time you either want a plain throw; or you want to construct your own exception to more directly match the problem from the perspective of the method in question. There are cases like the above where re-throwing like this makes more sense, and there are plenty of other cases. E.g. to take a very different example, if an ATOM file reader implemented with a FileStream and an XmlTextReader receives a file error or invalid XML, then it will perhaps want to throw exactly the same exception it received from those classes, but it should look to the caller that it is AtomFileReader that is throwing a FileNotFoundException or XmlException, so they might be candidates for similarly re-throwing.

Edit:

We can also combine the two:

public CopyTo(T[] array, int arrayIndex)
{
  try
  {
    _innerList.CopyTo(array, arrayIndex);
  }
  catch(ArgumentException ae)
  {
    throw ae;
  }
  catch(Exception ex)
  {
    //we weren't expecting this, there must be a bug in our code that put
    //us into an invalid state, and subsequently let this exception happen.
    LogException(ex);
    throw;
  }
}

Here is a code example which may help:

using System;
using System.Collections.Generic;
using System.Text;

namespace Event_Example
{
  // First we have to define a delegate that acts as a signature for the
  // function that is ultimately called when the event is triggered.
  // You will notice that the second parameter is of MyEventArgs type.
  // This object will contain information about the triggered event.

  public delegate void MyEventHandler(object source, MyEventArgs e);

  // This is a class which describes the event to the class that receives it.
  // An EventArgs class must always derive from System.EventArgs.

  public class MyEventArgs : EventArgs
  {
    private string EventInfo;

    public MyEventArgs(string Text) {
      EventInfo = Text;
    }

    public string GetInfo() {
      return EventInfo;
    }
  }

  // This next class is the one which contains an event and triggers it
  // once an action is performed. For example, lets trigger this event
  // once a variable is incremented over a particular value. Notice the
  // event uses the MyEventHandler delegate to create a signature
  // for the called function.

  public class MyClass
  {
    public event MyEventHandler OnMaximum;

    private int i;
    private int Maximum = 10;

    public int MyValue
    {
      get { return i; }
      set
      {
        if(value <= Maximum) {
          i = value;
        }
        else 
        {
          // To make sure we only trigger the event if a handler is present
          // we check the event to make sure it's not null.
          if(OnMaximum != null) {
            OnMaximum(this, new MyEventArgs("You've entered " +
              value.ToString() +
              ", but the maximum is " +
              Maximum.ToString()));
          }
        }
      }
    }
  }

  class Program
  {
    // This is the actual method that will be assigned to the event handler
    // within the above class. This is where we perform an action once the
    // event has been triggered.

    static void MaximumReached(object source, MyEventArgs e) {
      Console.WriteLine(e.GetInfo());
    }

    static void Main(string[] args) {
      // Now lets test the event contained in the above class.
      MyClass MyObject = new MyClass();
      MyObject.OnMaximum += new MyEventHandler(MaximumReached);
      for(int x = 0; x <= 15; x++) {
        MyObject.MyValue = x;
      }
      Console.ReadLine();
    }
  }
}

<style name="NewDialog">
    <item name="android:windowFrame">@null</item>
    <item name="android:windowBackground">@android:color/transparent</item>
    <item name="android:windowIsFloating">true</item>
    <item name="android:windowContentOverlay">@null</item>
    <item name="android:windowTitleStyle">@null</item>
    <item name="android:windowAnimationStyle">@android:style/Animation.Dialog</item>
    <item name="android:windowSoftInputMode">stateUnspecified|adjustPan</item>
    <item name="android:backgroundDimEnabled">false</item>
    <item name="android:background">@android:color/transparent</item>
</style>

use in java

Dialog dialog = new Dialog(this, R.style.NewDialog);

I hope help you !

I think that this should work:

.element {
   -webkit-transition: all .3s;
   -moz-transition: all .3s;
   -o-transition: all .3s;
   transition: all .3s;
}

In case anyone are still interested in this subject, I find that the best approach for filtering lists is to create a generic Filter class and use it with some base reflection/generics techniques contained in the Java old school SDK package. Here's what I did:

public class GenericListFilter<T> extends Filter {

    /**
     * Copycat constructor
     * @param list  the original list to be used
     */
    public GenericListFilter (List<T> list, String reflectMethodName, ArrayAdapter<T> adapter) {
        super ();

        mInternalList = new ArrayList<>(list);
        mAdapterUsed  = adapter;

        try {
            ParameterizedType stringListType = (ParameterizedType)
                    getClass().getField("mInternalList").getGenericType();
            mCompairMethod =
                    stringListType.getActualTypeArguments()[0].getClass().getMethod(reflectMethodName);
        }
        catch (Exception ex) {
            Log.w("GenericListFilter", ex.getMessage(), ex);

            try {
                if (mInternalList.size() > 0) {
                    T type = mInternalList.get(0);
                    mCompairMethod = type.getClass().getMethod(reflectMethodName);
                }
            }
            catch (Exception e) {
                Log.e("GenericListFilter", e.getMessage(), e);
            }

        }
    }

    /**
     * Let's filter the data with the given constraint
     * @param constraint
     * @return
     */
    @Override protected FilterResults performFiltering(CharSequence constraint) {
        FilterResults results = new FilterResults();
        List<T> filteredContents = new ArrayList<>();

        if ( constraint.length() > 0 ) {
            try {
                for (T obj : mInternalList) {
                    String result = (String) mCompairMethod.invoke(obj);
                    if (result.toLowerCase().startsWith(constraint.toString().toLowerCase())) {
                        filteredContents.add(obj);
                    }
                }
            }
            catch (Exception ex) {
                Log.e("GenericListFilter", ex.getMessage(), ex);
            }
        }
        else {
            filteredContents.addAll(mInternalList);
        }

        results.values = filteredContents;
        results.count  = filteredContents.size();
        return results;
    }

    /**
     * Publish the filtering adapter list
     * @param constraint
     * @param results
     */
    @Override protected void publishResults(CharSequence constraint, FilterResults results) {
        mAdapterUsed.clear();
        mAdapterUsed.addAll((List<T>) results.values);

        if ( results.count == 0 ) {
            mAdapterUsed.notifyDataSetInvalidated();
        }
        else {
            mAdapterUsed.notifyDataSetChanged();
        }
    }

    // class properties
    private ArrayAdapter<T> mAdapterUsed;
    private List<T> mInternalList;
    private Method  mCompairMethod;
}

And afterwards, the only thing you need to do is to create the filter as a member class (possibly within the View's "onCreate") passing your adapter reference, your list, and the method to be called for filtering:

this.mFilter = new GenericFilter<MyObjectBean> (list, "getName", adapter);

The only thing missing now, is to override the "getFilter" method in the adapter class:

@Override public Filter getFilter () {
     return MyViewClass.this.mFilter;
}

All done! You should successfully filter your list - Of course, you should also implement your filter algorithm the best way that describes your need, the code bellow is just an example.. Hope it helped, take care.

One can use df.insert(index_to_insert_at, column_header, init_value) to insert new column at a specific index.

cost_tbl.insert(1, "col_name", "") 

The above statement would insert an empty Column after the first column.

Just reading the file into an array, one line per element, is trivial:

open my $handle, '<', $path_to_file;
chomp(my @lines = <$handle>);
close $handle;

Now the lines of the file are in the array @lines.

If you want to make sure there is error handling for open and close, do something like this (in the snipped below, we open the file in UTF-8 mode, too):

my $handle;
unless (open $handle, "<:encoding(utf8)", $path_to_file) {
   print STDERR "Could not open file '$path_to_file': $!\n";
   # we return 'undefined', we could also 'die' or 'croak'
   return undef
}
chomp(my @lines = <$handle>);
unless (close $handle) {
   # what does it mean if close yields an error and you are just reading?
   print STDERR "Don't care error while closing '$path_to_file': $!\n";
} 

Another approach can be to store a key:value pair as a simple class using the following syntax :

<div id="my_div" class="foo:'bar'">...</div>

This is valid and can easily be retrieved with jQuery selectors or a custom made function.

I have changed min date property of date time picker by using this

$('#date').data("DateTimePicker").minDate(startDate);

I hope this one help to someone !

It might help you! demo

AngularJs Code-sample

var app = angular.module('urlApp', []);
app.controller('urlCtrl', function ($scope, $log, $window) {
    $scope.ClickMeToRedirect = function () {
        var url = "http://" + $window.location.host + "/Account/Login";
        $log.log(url);
        $window.location.href = url;
    };
});

HTML Code-sample

<div ng-app="urlApp">
    <div ng-controller="urlCtrl">
        Redirect to <a href="#" ng-click="ClickMeToRedirect()">Click Me!</a>
    </div>
</div>

yes, you can have associative arrays also in javascript:

var obj = 
{
    name:'some name',
    otherProperty:'prop value',
    date: new Date()
};
for(i in obj)
{
    var propVal = obj[i]; // i is the key, and obj[i] is the value ...
}

When you create the emulator, you need to choose properties CPU/ABI is Intel Atom (installed it in SDK manager )

This simple code will also work, to remove for example double quote from a string surrounded with double quote:

var str = 'remove "foo" delimiting double quotes';
console.log(str.replace(/"(.+)"/g, '$1'));

Note, the batch file approaches will be limited to the line limit for the DOS command processor - see What is the command line length limit?.

So if trying to process a file that has any lines more that 8192 characters the script will just skip them as the value can't be held.

It's not possible, sorry. If really needed, you could use a jQuery plugin to have a custom alert.

You can use pandas, by transforming the list to a pd.Series then simply use .value_counts()

import pandas as pd
a = ['1', '1', '1', '1', '1', '1', '2', '2', '2', '2', '7', '7', '7', '10', '10']
a_cnts = pd.Series(a).value_counts().to_dict()

Input  >> a_cnts["1"], a_cnts["10"]
Output >> (6, 2)

Guava Documentation

The JDK provides Collections.unmodifiableXXX methods, but in our opinion, these can be unwieldy and verbose; unpleasant to use everywhere you want to make defensive copies unsafe: the returned collections are only truly immutable if nobody holds a reference to the original collection inefficient: the data structures still have all the overhead of mutable collections, including concurrent modification checks, extra space in hash tables, etc.

NATIVE is Non access modifier.it can be applied only to METHOD. It indicates the PLATFORM-DEPENDENT implementation of method or code.

My answer is WRT python 2.6.2.

import commands

status, output = commands.getstatusoutput("curl -H \"Content-Type:application/json\" -k -u (few other parameters required) -X GET https://example.org -s")

print output

I apologize for not providing the required parameters 'coz it's confidential.

In order to redirect to a specific page no matter what the user role is, one can simply use defaultSucessUrl in the configuration file of Spring.

@Override
protected void configure(HttpSecurity http) throws Exception {
    
    
      http.authorizeRequests() 
      .antMatchers("/admin").hasRole("ADMIN") 
      .and()
      .formLogin() .loginPage("/login") 
                    .defaultSuccessUrl("/admin",true)
      .loginProcessingUrl("/authenticateTheUser")
      .permitAll();
     
    

End of the user session means when the browser is shut down.

Read this: http://en.wikipedia.org/wiki/HTTP_cookie#Expires_and_Max-Age

1. Download Debugging Tools for Windows.
2. Use the gflags utility to turn on user-mode stack traces.
3. Use UMDH to take multiple snapshots of your program's memory. Take a snapshot before memory gets allocated, and take a second snapshot after a point at which you believe that your program has leaked memory. You might want to add pauses or prompts in your program to give you a chance to run UMDH and take the snapshots.
4. Run UMDH again, this time in its mode that does a diff between the two snapshots. It will then generate a report containing the call stacks of suspected memory leaks.
5. Restore your previous gflags settings when you're done.

UMDH will give you more information than the CRT debug heap because it is watching memory allocations across your entire process; it can even tell you if third-party components are leaking.

A slight deviation from the original question however may prove useful for future people landing here wanting to DROP and CREATE an index, i.e. in a deployment script.

You can bypass the exists check simply by adding the following to your create statement:

CREATE INDEX IX_IndexName
ON dbo.TableName
WITH (DROP_EXISTING = ON);

Read more here: CREATE INDEX (Transact-SQL) - DROP_EXISTING Clause

N.B. As mentioned in the comments, the index must already exist for this clause to work without throwing an error.

It depends on which version of Oracle? Older versions require exp (export), newer versions use expdp (data pump); exp was deprecated but still works most of the time.

Before starting, note that Data Pump exports to the server-side Oracle "directory", which is an Oracle symbolic location mapped in the database to a physical location. There may be a default directory (DATA_PUMP_DIR), check by querying DBA_DIRECTORIES:

  SQL> select * from dba_directories;

... and if not, create one

  SQL> create directory DATA_PUMP_DIR as '/oracle/dumps';
  SQL> grant all on directory DATA_PUMP_DIR to myuser;    -- DBAs dont need this grant

Assuming you can connect as the SYSTEM user, or another DBA, you can export any schema like so, to the default directory:

 $ expdp system/manager schemas=user1 dumpfile=user1.dpdmp

Or specifying a specific directory, add directory=<directory name>:

 C:\> expdp system/manager schemas=user1 dumpfile=user1.dpdmp directory=DUMPDIR

With older export utility, you can export to your working directory, and even on a client machine that is remote from the server, using:

 $ exp system/manager owner=user1 file=user1.dmp

Make sure the export is done in the correct charset. If you haven't setup your environment, the Oracle client charset may not match the DB charset, and Oracle will do charset conversion, which may not be what you want. You'll see a warning, if so, then you'll want to repeat the export after setting NLS_LANG environment variable so the client charset matches the database charset. This will cause Oracle to skip charset conversion.

Example for American UTF8 (UNIX):

 $ export NLS_LANG=AMERICAN_AMERICA.AL32UTF8

Windows uses SET, example using Japanese UTF8:

 C:\> set NLS_LANG=Japanese_Japan.AL32UTF8

More info on Data Pump here: http://docs.oracle.com/cd/B28359_01/server.111/b28319/dp_export.htm#g1022624

Ctrl+Shift+F to invoke the Auto Formatter

Ctrl+I to indent the selected part (or all) of you code.

You can use .addAll() to add the elements of the second list to the first:

array1.addAll(array2);

Edit: Based on your clarification above ("i want a single String in the new Arraylist which has both name and number."), you would want to loop through the first list and append the item from the second list to it.

Something like this:

int length = array1.size();
if (length != array2.size()) { // Too many names, or too many numbers
    // Fail
}
ArrayList<String> array3 = new ArrayList<String>(length); // Make a new list
for (int i = 0; i < length; i++) { // Loop through every name/phone number combo
    array3.add(array1.get(i) + " " + array2.get(i)); // Concat the two, and add it
}

If you put in:

array1 : ["a", "b", "c"]
array2 : ["1", "2", "3"]

You will get:

array3 : ["a 1", "b 2", "c 3"]

Try

java -cp .:mail-1.4.1.jar JavaxMailHTML 

no need to have manifest file.

TL;DR: - grab the datatable from the dataset and read from the rows property.

            DataSet ds = new DataSet();
            DataTable dt = new DataTable();
            DataColumn col = new DataColumn("Id", typeof(int));
            dt.Columns.Add(col);
            dt.Rows.Add(new object[] { 1 });
            ds.Tables.Add(dt);

            var row = ds.Tables[0].Rows[0];
            //access the ID column.  
            var id = (int) row.ItemArray[0];

A DataSet is a copy of data accessed from a database, but doesn't even require a database to use at all. It is preferred, though.

Note that if you are creating a new application, consider using an ORM, such as the Entity Framework or NHibernate, since DataSets are no longer preferred; however, they are still supported and as far as I can tell, are not going away any time soon.

If you are reading from standard dataset, then @KMC's answer is what you're looking for. The proper way to do this, though, is to create a Strongly-Typed DataSet and use that so you can take advantage of Intellisense. Assuming you are not using the Entity Framework, proceed.

If you don't already have a dedicated space for your data access layer, such as a project or an App_Data folder, I suggest you create one now. Otherwise, proceed as follows under your data project folder: Add > Add New Item > DataSet. The file created will have an .xsd extension.

You'll then need to create a DataTable. Create a DataTable (click on the file, then right click on the design window - the file has an .xsd extension - and click Add > DataTable). Create some columns (Right click on the datatable you just created > Add > Column). Finally, you'll need a table adapter to access the data. You'll need to setup a connection to your database to access data referenced in the dataset.

After you are done, after successfully referencing the DataSet in your project (using statement), you can access the DataSet with intellisense. This makes it so much easier than untyped datasets.

When possible, use Strongly-Typed DataSets instead of untyped ones. Although it is more work to create, it ends up saving you lots of time later with intellisense. You could do something like:

MyStronglyTypedDataSet trainDataSet = new MyStronglyTypedDataSet();
DataAdapterForThisDataSet dataAdapter = new DataAdapterForThisDataSet();
//code to fill the dataset 
//omitted - you'll have to either use the wizard to create data fill/retrieval
//methods or you'll use your own custom classes to fill the dataset.
if(trainDataSet.NextTrainDepartureTime > CurrentTime){
   trainDataSet.QueueNextTrain = true; //assumes QueueNextTrain is in your Strongly-Typed dataset
}
else
    //do some other work

The above example assumes that your Strongly-Typed DataSet has a column of type DateTime named NextTrainDepartureTime. Hope that helps!

After searching the Web and trying many different ways, here's what I'd suggest for Java EE 6 authentication:

Set up the security realm:

In my case, I had the users in the database. So I followed this blog post to create a JDBC Realm that could authenticate users based on username and MD5-hashed passwords in my database table:

http://blog.gamatam.com/2009/11/jdbc-realm-setup-with-glassfish-v3.html

Note: the post talks about a user and a group table in the database. I had a User class with a UserType enum attribute mapped via javax.persistence annotations to the database. I configured the realm with the same table for users and groups, using the userType column as the group column and it worked fine.

Use form authentication:

Still following the above blog post, configure your web.xml and sun-web.xml, but instead of using BASIC authentication, use FORM (actually, it doesn't matter which one you use, but I ended up using FORM). Use the standard HTML , not the JSF .

Then use BalusC's tip above on lazy initializing the user information from the database. He suggested doing it in a managed bean getting the principal from the faces context. I used, instead, a stateful session bean to store session information for each user, so I injected the session context:

 @Resource
 private SessionContext sessionContext;

With the principal, I can check the username and, using the EJB Entity Manager, get the User information from the database and store in my SessionInformation EJB.

Logout:

I also looked around for the best way to logout. The best one that I've found is using a Servlet:

 @WebServlet(name = "LogoutServlet", urlPatterns = {"/logout"})
 public class LogoutServlet extends HttpServlet {
  @Override
  protected void service(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
   HttpSession session = request.getSession(false);

   // Destroys the session for this user.
   if (session != null)
        session.invalidate();

   // Redirects back to the initial page.
   response.sendRedirect(request.getContextPath());
  }
 }

Although my answer is really late considering the date of the question, I hope this helps other people that end up here from Google, just like I did.

Ciao,

Vítor Souza

Simple definitions for overloading and overriding

Overloading (Compile Time Polymorphism):: Functions with same name and different parameters

public class A
{
    public void print(int x, int y)
    {
        Console.WriteLine("Parent Method");
    }
}

public class B : A
{
    public void child()
    {
        Console.WriteLine("Child Method");
    }

    public void print(float x, float y)
    {
        Console.WriteLine("Overload child method");
    }
}

Overriding (Run Time Polymorphism):: Functions in the extended class with same name and same parameters as in the base class, but with different behaviors.

public class A
{
    public virtual void print()
    {
        Console.WriteLine("Parent Method");
    }
}

public class B : A
{
    public void child()
    {
        Console.WriteLine("Child Method");
    }

    public override void print()
    {
        Console.WriteLine("Overriding child method");
    }
}

May be it will be helpful for someone: I had the same error after deleting several files from project. After having deletes committed in git repository this error has gone...

Updated 5 September 2010

Seeing as everyone seems to get directed here for this issue, I'm adding my answer to a similar question, which contains the same code as this answer but with full background for those who are interested:

IE's document.selection.createRange doesn't include leading or trailing blank lines

To account for trailing line breaks is tricky in IE, and I haven't seen any solution that does this correctly, including any other answers to this question. It is possible, however, using the following function, which will return you the start and end of the selection (which are the same in the case of a caret) within a <textarea> or text <input>.

Note that the textarea must have focus for this function to work properly in IE. If in doubt, call the textarea's focus() method first.

function getInputSelection(el) {
    var start = 0, end = 0, normalizedValue, range,
        textInputRange, len, endRange;

    if (typeof el.selectionStart == "number" && typeof el.selectionEnd == "number") {
        start = el.selectionStart;
        end = el.selectionEnd;
    } else {
        range = document.selection.createRange();

        if (range && range.parentElement() == el) {
            len = el.value.length;
            normalizedValue = el.value.replace(/\r\n/g, "\n");

            // Create a working TextRange that lives only in the input
            textInputRange = el.createTextRange();
            textInputRange.moveToBookmark(range.getBookmark());

            // Check if the start and end of the selection are at the very end
            // of the input, since moveStart/moveEnd doesn't return what we want
            // in those cases
            endRange = el.createTextRange();
            endRange.collapse(false);

            if (textInputRange.compareEndPoints("StartToEnd", endRange) > -1) {
                start = end = len;
            } else {
                start = -textInputRange.moveStart("character", -len);
                start += normalizedValue.slice(0, start).split("\n").length - 1;

                if (textInputRange.compareEndPoints("EndToEnd", endRange) > -1) {
                    end = len;
                } else {
                    end = -textInputRange.moveEnd("character", -len);
                    end += normalizedValue.slice(0, end).split("\n").length - 1;
                }
            }
        }
    }

    return {
        start: start,
        end: end
    };
}

You need to change permissions on the folder bootstrap/css. Your super user may be able to access it but it doesn't mean apache or nginx have access to it, that's why you still need to change the permissions.

Tip: I usually make the apache/nginx's user group owner of that kind of folders and give 775 permission to it.

Try

df.loc[df.my_channel > 20000, 'my_channel'] = 0

Note: Since v0.20.0, ix has been deprecated in favour of loc / iloc.

You can also leverage the numpy library for logical operations. Its pretty fast.

df[np.logical_and(df['A'] == 1 ,df['B'] == 6)]

You may want to read my prior posting on SO. (Macro'ed version with a temporary ostringstream object.)

For the record: In my own code, I favor snprintf(). With a char array on the local stack, it's not that inefficient. (Well, maybe if you exceeded the array size and looped to do it twice...)

(I've also wrapped it via vsnprintf(). But that costs me some type checking. Yelp if you want the code...)

CONVERT(column1 USING utf8)

Solves my problem. Where column1 is the column which gives me this error.

You can use useHistory hook since react-router v5.1.0.

The useHistory hook gives you access to the history instance that you may use to navigate.

import React from 'react'
import { useHistory } from 'react-router-dom'

export default function SomeComponent() {
  const { push } = useHistory()
  ...
  <button
    type="button"
    onClick={() => push('/some-link')}
  >
    Some link
  </button>
  ...
}

Perhaps the Linux Tools Project for Eclipse could fill your needs?

The Linux Tools project aims to bring a full-featured C and C++ IDE to Linux developers. We build on the source editing and debugging features of the CDT and integrate popular native development tools such as the GNU Autotools, Valgrind, OProfile, RPM, SystemTap, GCov, GProf, LTTng, etc. Current projects include LTTng trace viewers and analyzers, an RPM .spec editor, Autotools build integration, a Valgrind heap usage analysis tool, and OProfile call profiling tools.

Using the method SetSocketOption, you will be able to set KeepAlive that will let you know whenever a Socket gets disconnected

Socket _connectedSocket = this._sSocketEscucha.EndAccept(asyn);
                _connectedSocket.SetSocketOption(SocketOptionLevel.Socket, SocketOptionName.KeepAlive, 1);

http://msdn.microsoft.com/en-us/library/1011kecd(v=VS.90).aspx

Hope it helps! Ramiro Rinaldi

You should use partial views. I use the following approach:

Use a view model so you're not passing your domain models to your views:

public class EditPersonViewModel
{
    public int Id { get; set; }   // this is only used to retrieve record from Db
    public string Name { get; set; }
    public string Age { get; set; }
}

In your PersonController:

[HttpGet] // this action result returns the partial containing the modal
public ActionResult EditPerson(int id)
{  
    var viewModel = new EditPersonViewModel();
    viewModel.Id = id;
    return PartialView("_EditPersonPartial", viewModel);
}

[HttpPost] // this action takes the viewModel from the modal
public ActionResult EditPerson(EditPersonViewModel viewModel)
{
    if (ModelState.IsValid)
    {
        var toUpdate = personRepo.Find(viewModel.Id);
        toUpdate.Name = viewModel.Name;
        toUpdate.Age = viewModel.Age;
        personRepo.InsertOrUpdate(toUpdate);
        personRepo.Save();
        return View("Index");
    }
}

Next create a partial view called _EditPersonPartial. This contains the modal header, body and footer. It also contains the Ajax form. It's strongly typed and takes in our view model.

@model Namespace.ViewModels.EditPersonViewModel
<div class="modal-header">
<button type="button" class="close" data-dismiss="modal" aria-hidden="true">×</button>
    <h3 id="myModalLabel">Edit group member</h3>
</div>
<div>
@using (Ajax.BeginForm("EditPerson", "Person", FormMethod.Post,
                    new AjaxOptions
                    {
                        InsertionMode = InsertionMode.Replace,
                        HttpMethod = "POST",
                        UpdateTargetId = "list-of-people"
                    }))
{
    @Html.ValidationSummary()
    @Html.AntiForgeryToken()
    <div class="modal-body">
        @Html.Bootstrap().ControlGroup().TextBoxFor(x => x.Name)
        @Html.Bootstrap().ControlGroup().TextBoxFor(x => x.Age)
    </div>
    <div class="modal-footer">
        <button class="btn btn-inverse" type="submit">Save</button>
    </div>
}

Now somewhere in your application, say another partial _peoplePartial.cshtml etc:

<div>
   @foreach(var person in Model.People)
    {
        <button class="btn btn-primary edit-person" data-id="@person.PersonId">Edit</button>
    }
</div>
// this is the modal definition
<div class="modal hide fade in" id="edit-person">
    <div id="edit-person-container"></div>
</div>

    <script type="text/javascript">
    $(document).ready(function () {
        $('.edit-person').click(function () {
            var url = "/Person/EditPerson"; // the url to the controller
            var id = $(this).attr('data-id'); // the id that's given to each button in the list
            $.get(url + '/' + id, function (data) {
                $('#edit-person-container').html(data);
                $('#edit-person').modal('show');
            });
        });
     });
   </script>

With the step attribute specified to the precision of the decimals you want, and the lang attribute [which is set to a locale that formats decimals with period], your html5 numeric input will accept decimals. eg. to take values like 10.56; i mean 2 decimal place numbers, do this:

<input type="number" step="0.01" min="0" lang="en" value="1.99">

You can further specify the max attribute for the maximum allowable value.

Edit Add a lang attribute to the input element with a locale value that formats decimals with point instead of comma

You can just read from stdin unless the user supply a filename ?

If not, treat the special "filename" - as meaning "read from stdin". The user would have to start the program like cat file | myprogram - if he wants to pipe data to it, and myprogam file if he wants it to read from a file.

int main(int argc,char *argv[] ) {
  FILE *input;
  if(argc != 2) {
     usage();
     return 1;
   }
   if(!strcmp(argv[1],"-")) {
     input = stdin;
    } else {
      input = fopen(argv[1],"rb");
      //check for errors
    }

If you're on *nix, you can check whether stdin is a fifo:

 struct stat st_info;
 if(fstat(0,&st_info) != 0)
   //error
  }
  if(S_ISFIFO(st_info.st_mode)) {
     //stdin is a pipe
  }

Though that won't handle the user doing myprogram <file

You can also check if stdin is a terminal/console

if(isatty(0)) {
  //stdin is a terminal
}

You can use dispatch_after to call a block later. In Xcode, start typing dispatch_after and hit Enter to autocomplete to the following:

Here's an example with two floats as "arguments." You don't have to rely on any type of macro, and the intent of the code is quite clear:

Swift 3, Swift 4

let time1 = 8.23
let time2 = 3.42

// Delay 2 seconds
DispatchQueue.main.asyncAfter(deadline: .now() + 2.0) {
    print("Sum of times: \(time1 + time2)")
}

Swift 2

let time1 = 8.23
let time2 = 3.42

// Delay 2 seconds
dispatch_after(dispatch_time(DISPATCH_TIME_NOW, Int64(2.0 * Double(NSEC_PER_SEC))), dispatch_get_main_queue()) { () -> Void in
        println("Sum of times: \(time1 + time2)")
}

Objective C

CGFloat time1 = 3.49;
CGFloat time2 = 8.13;

// Delay 2 seconds
dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(2.0 * NSEC_PER_SEC)), dispatch_get_main_queue(), ^{
    CGFloat newTime = time1 + time2;
    NSLog(@"New time: %f", newTime);
});

Shortly: gene_name[x] is a mutable object so it cannot be hashed. To use an object as a key in a dictionary, python needs to use its hash value, and that's why you get an error.

Further explanation:

Mutable objects are objects which value can be changed. For example, list is a mutable object, since you can append to it. int is an immutable object, because you can't change it. When you do:

a = 5;
a = 3;

You don't change the value of a, you create a new object and make a point to its value.

Mutable objects cannot be hashed. See this answer.

To solve your problem, you should use immutable objects as keys in your dictionary. For example: tuple, string, int.

getFilesDir()

Returns the absolute path to the directory on the filesystem where files created with openFileOutput(String, int) are stored.

Environment.getDataDirectory()

Return the user data directory.

No, You cannot do that. Use the following line of code instead:

IEnumerable<int> usersIds = new List<int>() {1, 2, 3}.AsEnumerable();

I hope it helps.

wc can't get the filename if you don't give it one.

wc -l < "$JAVA_TAGS_FILE"

If your goal is to simply display some static files you can use the Connect package. I have had some success (I'm still pretty new to NodeJS myself), using it and the twitter bootstrap API in combination.

at the command line

:\> cd <path you wish your server to reside>
:\> npm install connect

Then in a file (I named) Server.js

var connect = require('connect'),
   http = require('http');
connect()
   .use(connect.static('<pathyouwishtoserve>'))
   .use(connect.directory('<pathyouwishtoserve>'))
   .listen(8080);

Finally

:\>node Server.js

Caveats:

If you don't want to display the directory contents, exclude the .use(connect.directory line.

So I created a folder called "server" placed index.html in the folder and the bootstrap API in the same folder. Then when you access the computers IP:8080 it's automagically going to use the index.html file.

If you want to use port 80 (so just going to http://, and you don't have to type in :8080 or some other port). you'll need to start node with sudo, I'm not sure of the security implications but if you're just using it for an internal network, I don't personally think it's a big deal. Exposing to the outside world is another story.

Update 1/28/2014:

I haven't had to do the following on my latest versions of things, so try it out like above first, if it doesn't work (and you read the errors complaining it can't find nodejs), go ahead and possibly try the below.

End Update

Additionally when running in ubuntu I ran into a problem using nodejs as the name (with NPM), if you're having this problem, I recommend using an alias or something to "rename" nodejs to node.

Commands I used (for better or worse):

Create a new file called node

:\>gedit /usr/local/bin/node
#!/bin/bash
exec /nodejs "$@"

sudo chmod -x /usr/local/bin/node

That ought to make

node Server.js 

work just fine

You are almost there :)

All that is left is to

git checkout featurex
git merge our-team

This will merge our-team into featurex.

The above assumes you have already committed/stashed your changes in featurex, if that is not the case you will need to do this first.

Until version 4.6

The dash type of a linestyle is given by the linetype, which does also select the line color unless you explicitely set an other one with linecolor.

However, the support for dashed lines depends on the selected terminal:

1. Some terminals don't support dashed lines, like png (uses libgd)
2. Other terminals, like pngcairo, support dashed lines, but it is disables by default. To enable it, use set termoption dashed, or set terminal pngcairo dashed ....
3. The exact dash patterns differ between terminals. To see the defined linetype, use the test command:

Running

set terminal pngcairo dashed
set output 'test.png'
test
set output

gives:

whereas, the postscript terminal shows different dash patterns:

set terminal postscript eps color colortext
set output 'test.eps'
test
set output

Version 5.0

Starting with version 5.0 the following changes related to linetypes, dash patterns and line colors are introduced:

• A new dashtype parameter was introduced:

  To get the predefined dash patterns, use e.g.

  plot x dashtype 2
  

  You can also specify custom dash patterns like

  plot x dashtype (3,5,10,5),\
       2*x dashtype '.-_'
  

• The terminal options dashed and solid are ignored. By default all lines are solid. To change them to dashed, use e.g.

  set for [i=1:8] linetype i dashtype i
  

• The default set of line colors was changed. You can select between three different color sets with set colorsequence default|podo|classic:

1. Click on the "Code" button upright of the request page.
2. From the opened window select cURL.
3. Copy and share the generated code.

You can use this curl request to import it into Postman.

Run this:

Rails.application.eager_load! 

Then

ActiveRecord::Base.descendants

To return a list of models/tables

Using imagemagick, you can try:

convert page.png page.pdf

Or for multiple images:

convert page*.png mydoc.pdf

I like the hybrid CSS + jQuery solution.

To make all elements inside <div class="draggable"></div> unselectable, use this CSS:

.draggable {
    -webkit-user-select: none;
     -khtml-user-select: none;
       -moz-user-select: none;
        -ms-user-select: none;
         -o-user-select: none;
            user-select: none;
}

.draggable input {
    -webkit-user-select: text;
     -khtml-user-select: text;
       -moz-user-select: text;
         -o-user-select: text;
            user-select: text;
 }

And then, if you're using jQuery, add this inside a $(document).ready() block:

if (($.browser.msie && $.browser.version < 10) || $.browser.opera) $('.draggable').find(':not(input)').attr('unselectable', 'on');

I figure you still want any input elements to be interactable, hence the :not() pseudo-selector. You could use '*' instead if you don't care.

Caveat: Internet Explorer 9 may not need this extra jQuery piece, so you may want to add a version check in there.

On Linux use below to test (it would replace the whitespaces with comma)

 sed 's/\s/,/g' /tmp/test.txt | head

later you can take the output into the file using below command:

sed 's/\s/,/g' /tmp/test.txt > /tmp/test_final.txt

PS: test is the file which you want to use

You can use

 =Format(Fields!myField.Value,"F2") 

Attention: The other answers only work on SQL Servers with English configuration! Use SET DATEFIRST 7 to ensure DATEPART(DW, ...) returns 1 for Sunday and 7 for Saturday.

Here's a version that is independent of the local setting and does not require to use :

CREATE FUNCTION [dbo].[fct_IsDateWeekend] ( @date DATETIME )
RETURNS BIT
AS
BEGIN
    RETURN CASE WHEN DATEPART(DW, @date + @@DATEFIRST - 1) > 5  THEN 1 ELSE 0 END;
END;

If you don't want to use the function, simply use this in your SELECT statement:

CASE WHEN DATEPART(DW, YourDateTime + @@DATEFIRST - 1) > 5  THEN 'Weekend' ELSE 'Weekday' END

Use a colon:

: ${A:=hello}

The colon is a null command that does nothing and ignores its arguments. It is built into bash so a new process is not created.

Similar to the accepted solution, but you can replace the

let button: UIButton = UIButton.buttonWithType(UIButtonType.Custom) as! UIButton

with

let button = UIButton()

Here is the full solution, enjoy: (it's just a bit cleaner than the accepted solution)

let button = UIButton()
button.frame = CGRectMake(0, 0, 51, 31) //won't work if you don't set frame
button.setImage(UIImage(named: "fb"), forState: .Normal)
button.addTarget(self, action: Selector("fbButtonPressed"), forControlEvents: .TouchUpInside)

let barButton = UIBarButtonItem()
barButton.customView = button
self.navigationItem.rightBarButtonItem = barButton

The best way around this would be to create an Excel called 'launcher.xlsm' in the same folder as the file you wish to open. In the 'launcher' file put the following code in the 'Workbook' object, but set the constant TargetWBName to be the name of the file you wish to open.

Private Const TargetWBName As String = "myworkbook.xlsx"

'// First, a function to tell us if the workbook is already open...
Function WorkbookOpen(WorkBookName As String) As Boolean
' returns TRUE if the workbook is open
    WorkbookOpen = False
    On Error GoTo WorkBookNotOpen
    If Len(Application.Workbooks(WorkBookName).Name) > 0 Then
        WorkbookOpen = True
        Exit Function
    End If
WorkBookNotOpen:
End Function

Private Sub Workbook_Open()
    'Check if our target workbook is open
    If WorkbookOpen(TargetWBName) = False Then
        'set calculation to manual
        Application.Calculation = xlCalculationManual
        Workbooks.Open ThisWorkbook.Path & "\" & TargetWBName
        DoEvents
        Me.Close False
    End If
End Sub

Set the constant 'TargetWBName' to be the name of the workbook that you wish to open. This code will simply switch calculation to manual, then open the file. The launcher file will then automatically close itself. *NOTE: If you do not wish to be prompted to 'Enable Content' every time you open this file (depending on your security settings) you should temporarily remove the 'me.close' to prevent it from closing itself, save the file and set it to be trusted, and then re-enable the 'me.close' call before saving again. Alternatively, you could just set the False to True after Me.Close

$time_PHP = strtotime( $datetime_SQL );

Typically, no.

Streaming is seldom used over HTTP itself, and HTTP is seldom run over UDP. See, however, RTP.

For something as your example (in the comment), you're not showing a protocol for the resource. If that protocol were to be HTTP, then I wouldn't call the access "streaming"; even if it in some sense of the word is since it's sending a (possibly large) resource serially over a network. Typically, the resource will be saved to local disk before being played back, so the network transfer is not what's usually meant by "streaming".

As commenters have pointed out, though, it's certainly possible to really stream over HTTP, and that's done by some.

You can use Path from the pathlib module:

from pathlib import Path

# ...

Path(__file__)

You can use call to parent to go further in the path:

Path(__file__).parent

If the question is: "Is it possible to add value on ESC" than the answer is yes. You can do something like that. For example with use of jQuery it would look like below.

HTML

<script src="//ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js" type="text/javascript"></script>

<input type="text" value="default!" id="myInput" />

JavaScript

$(document).ready(function (){
    $('#myInput').keyup(function(event) {
        // 27 is key code of ESC
        if (event.keyCode == 27) {
            $('#myInput').val('default!');
            // Loose focus on input field
            $('#myInput').blur();
        }
    });
});

Working source can be found here: http://jsfiddle.net/S3N5H/1/

Please let me know if you meant something different, I can adjust the code later.

PHP is run server-side. JavaScript is run client-side in the browser of the user requesting the page. By the time the JavaScript is executed, there is no access to PHP on the server whatsoever. Please read this article with details about client-side vs server-side coding.

What happens in a nutshell is this:

• You click a link in your browser on your computer under your desk
• The browser creates an HTTP request and sends it to a server on the Internet
• The server checks if he can handle the request
• If the request is for a PHP page, the PHP interpreter is started
• The PHP interpreter will run all PHP code in the page you requested
• The PHP interpreter will NOT run any JS code, because it has no clue about it
• The server will send the page assembled by the interpreter back to your browser
• Your browser will render the page and show it to you
• JavaScript is executed on your computer

In your case, PHP will write the JS code into the page, so it can be executed when the page is rendered in your browser. By that time, the PHP part in your JS snippet does no longer exist. It was executed on the server already. It created a variable $result that contained a SQL query string. You didn't use it, so when the page is send back to your browser, it's gone. Have a look at the sourcecode when the page is rendered in your browser. You will see that there is nothing at the position you put the PHP code.

The only way to do what you are looking to do is either:

• do a redirect to a PHP script or
• do an AJAX call to a PHP script

with the values you want to be insert into the database.

I used the following for creating a custom progress bar.

File res/drawable/progress_bar_states.xml declares the colors of the different states:

<layer-list xmlns:android="http://schemas.android.com/apk/res/android">

    <item android:id="@android:id/background">
        <shape>
            <gradient
                    android:startColor="#000001"
                    android:centerColor="#0b131e"
                    android:centerY="0.75"
                    android:endColor="#0d1522"
                    android:angle="270"
            />
        </shape>
    </item>

    <item android:id="@android:id/secondaryProgress">
        <clip>
            <shape>
                <gradient
                        android:startColor="#234"
                        android:centerColor="#234"
                        android:centerY="0.75"
                        android:endColor="#a24"
                        android:angle="270"
                />
            </shape>
        </clip>
    </item>

    <item android:id="@android:id/progress">
        <clip>
            <shape>
                <gradient
                    android:startColor="#144281"
                    android:centerColor="#0b1f3c"
                    android:centerY="0.75"
                    android:endColor="#06101d"
                    android:angle="270"
                />
            </shape>
        </clip>
    </item>

</layer-list>

And the code inside your layout xml:

<ProgressBar android:id="@+id/progressBar"
    android:progressDrawable="@drawable/progress_bar_states"
    android:layout_width="fill_parent" android:layout_height="8dip" 
    style="?android:attr/progressBarStyleHorizontal" 
    android:indeterminateOnly="false" 
    android:max="100">
</ProgressBar>

Enjoy!

For folks who are stumbling across Victor Stoddard's answer above in 2019, and become hopeful and doe eyed, note that:

a) Support for X-Content-Duration was removed in Firefox 41: https://developer.mozilla.org/en-US/docs/Mozilla/Firefox/Releases/41#HTTP

b) I think it was only supported in Firefox for .ogg audio and .ogv video, not for any other types.

c) I can't see that it was ever supported at all in Chrome, but that may just be a lack of research on my part. But its presence or absence seems to have no effect one way or another for webm or ogv videos as of today in Chrome 71.

d) I can't find anywhere where 'Content-Duration' replaced 'X-Content-Duration' for anything, I don't think 'X-Content-Duration' lived long enough for there to be a successor header name.

I think this means that, as of today if you want to serve webm or ogv containers that contain streams that don't know their duration (e.g. the output of an ffpeg pipe) to Chrome or FF, and you want them to be scrubbable in an HTML 5 video element, you are probably out of luck. Firefox 64.0 makes a half hearted attempt to make these scrubbable whether or not you serve via range requests, but it gets confused and throws up a spinning wheel until the stream is completely downloaded if you seek a few times more than it thinks is appropriate. Chrome doesn't even try, it just nopes out and won't let you scrub at all until the entire stream is finished playing.

Just use:

file -I <filename>

That's it.

Just use:

mail
d 1-15
quit

Which will delete all messages between number 1 and 15. to delete all, use the d *.

I just used this myself on ubuntu 12.04.4, and it worked like a charm.

For example:

eric@dev ~ $ mail
Heirloom Mail version 12.4 7/29/08.  Type ? for help.
"/var/spool/mail/eric": 2 messages 2 new
>N  1 Cron Daemon           Tue Jul 29 17:43  23/1016  "Cron <eric@ip-10-0-1-51> /usr/bin/php /var/www/sandbox/eric/c"
 N  2 Cron Daemon           Tue Jul 29 17:44  23/1016  "Cron <eric@ip-10-0-1-51> /usr/bin/php /var/www/sandbox/eric/c"
& d *
& quit

Then check your mail again:

eric@dev ~ $ mail
No mail for eric
eric@dev ~ $

What is tripping you up is you are using x or exit to quit which rolls back the changes during that session.

Have you looked at the samples provided with EPPlus?

This one shows you how to create a file http://epplus.codeplex.com/wikipage?title=ContentSheetExample

This one shows you how to use it to stream back a file http://epplus.codeplex.com/wikipage?title=WebapplicationExample

This is how we use the package to generate a file.

var newFile = new FileInfo(ExportFileName);
using (ExcelPackage xlPackage = new ExcelPackage(newFile))
{                       
    // do work here                            
    xlPackage.Save();
}

For SQL Server, from http://msdn.microsoft.com/en-us/library/ms179859.aspx :

• % Any string of zero or more characters.

  WHERE title LIKE '%computer%' finds all book titles with the word 'computer' anywhere in the book title.

• _ Any single character.

  WHERE au_fname LIKE '_ean' finds all four-letter first names that end with ean (Dean, Sean, and so on).

• [ ] Any single character within the specified range ([a-f]) or set ([abcdef]).

  WHERE au_lname LIKE '[C-P]arsen' finds author last names ending with arsen and starting with any single character between C and P, for example Carsen, Larsen, Karsen, and so on. In range searches, the characters included in the range may vary depending on the sorting rules of the collation.

• [^] Any single character not within the specified range ([^a-f]) or set ([^abcdef]).

  WHERE au_lname LIKE 'de[^l]%' all author last names starting with de and where the following letter is not l.

The only way I can get firefox, edge, and Internet explorer to turn off autocomplete is to add autocomplete="false" in my form statement like:

  <form action="postingpage.php" autocomplete="false" method="post">

and I have to add the autocomplete="off" to my form input and change the type to text Like:

     <input type="text" autocomplete="off">

It seems that this html code needs to be standardized with the browsers. the form type = password should be revised so that it overrides browser settings. The only issue I have is that I lost my input masking. But on the bright side the annoying "this site is not secure" is not showing up in firefox.

for me, its not a big deal since the user is already authenticated and its my change user name and password portion of it

For .NET Framework 4.5

ILMerge.exe /target:winexe /targetplatform:"v4,C:\Program Files\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0" /out:finish.exe insert1.exe insert2.dll

ILMerge

1. Open CMD and cd to your directory. Let's say: cd C:\test
2. Insert the above code.
3. /out:finish.exe replace finish.exe with any filename you want.
4. Behind the /out:finish.exe you have to give the files you want to be combined.

That's a lot of questions.

1. Why EOF is -1: usually -1 in POSIX system calls is returned on error, so i guess the idea is "EOF is kind of error"

2. any boolean operation (including !=) returns 1 in case it's TRUE, and 0 in case it's FALSE, so getchar() != EOF is 0 when it's FALSE, meaning getchar() returned EOF.

3. in order to emulate EOF when reading from stdin press Ctrl+D

In your Html page please add

<!DOCTYPE html>
<html lang="en">
  <head>
    <meta charset="utf-8">
    <meta http-equiv="X-UA-Compatible" content="IE=edge">
    <meta name="viewport" content="width=device-width, initial-scale=1">
    <title>Test the multiselect with ajax</title>

    <!-- Bootstrap -->
    <link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.5/css/bootstrap.min.css">
    <link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/font-awesome/4.4.0/css/font-awesome.min.css">
    <!-- Bootstrap multiselect -->
    <link rel="stylesheet" href="http://davidstutz.github.io/bootstrap-multiselect/dist/css/bootstrap-multiselect.css">

    <!-- HTML5 Shim and Respond.js IE8 support of HTML5 elements and media queries -->
    <!-- WARNING: Respond.js doesn't work if you view the page via file:// -->
    <!--[if lt IE 9]>
      <script src="https://oss.maxcdn.com/libs/html5shiv/3.7.2/html5shiv.js"></script>
      <script src="https://oss.maxcdn.com/libs/respond.js/1.4.2/respond.min.js"></script>
    <![endif]-->
  </head>
  <body>
    <div class="container">
      <br>

      <form method="post" id="myForm">

        <!-- Build your select: -->
        <select name="categories[]" id="example-getting-started" multiple="multiple" class="col-md-12">
          <option value="A">Cheese</option>
          <option value="B">Tomatoes</option>
          <option value="C">Mozzarella</option>
          <option value="D">Mushrooms</option>
          <option value="E">Pepperoni</option>
          <option value="F">Onions</option>
          <option value="G">10</option>
          <option value="H">11</option>
          <option value="I">12</option>
        </select>
        <br><br>
        <button type="button" class="btnSubmit"> Send </button>

      </form>

      <br><br>
      <div id="result">result</div>
    </div><!--container-->

    <!-- jQuery (necessary for Bootstrap's JavaScript plugins) -->
    <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.3/jquery.min.js"></script>
    <!-- Include all compiled plugins (below), or include individual files as needed -->
    <script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.5/js/bootstrap.min.js"></script>
    <!-- Bootstrap multiselect -->
    <script src="http://davidstutz.github.io/bootstrap-multiselect/dist/js/bootstrap-multiselect.js"></script>

    <!-- Bootstrap multiselect -->
    <script src="ajax.js"></script>

    <!-- Initialize the plugin: -->
    <script type="text/javascript">
      $(document).ready(function() {

        $('#example-getting-started').multiselect();

      });
    </script>

  </body>
</html>

In your ajax.js page please add

$(document).ready(function () {
  $(".btnSubmit").on('click',(function(event) {
    var formData = new FormData($('#myForm')[0]);
    $.ajax({
      url: "action.php",
      type: "POST",
      data: formData,
      contentType: false,
      cache: false,
      processData:false,
      success: function(data)
      {
        $("#result").html(data);

        // To clear the selected options
        var select = $("#example-getting-started");
        select.children().remove();
        if (data.d) {
          $(data.d).each(function(key,value) {
            $("#example-getting-started").append($("<option></option>").val(value.State_id).html(value.State_name));
          });
        }
        $('#example-getting-started').multiselect({includeSelectAllOption: true});
        $("#example-getting-started").multiselect('refresh');

      },
      error: function()
      {
        console.log("failed to send the data");
      }
    });
  }));
});

In your action.php page add

  echo "<b>You selected :</b>";

  for($i=0;$i<=count($_POST['categories']);$i++){

    echo $_POST['categories'][$i]."<br>";

  }

In my case url contained wrong chars like spaces . Overall log your url and in some cases use browser.

I never liked the key code validation. My approach was to see if the input have text (any character), confirming that the user is entering text and no other characters

$('#input').on('keyup', function() {_x000D_
    var words = $(this).val();_x000D_
    // if input is empty, remove the word count data and return_x000D_
    if(!words.length) {_x000D_
        $(this).removeData('wcount');_x000D_
        return true;_x000D_
    }_x000D_
    // if word count data equals the count of the input, return_x000D_
    if(typeof $(this).data('wcount') !== "undefined" && ($(this).data('wcount') == words.length)){_x000D_
        return true;_x000D_
    }_x000D_
    // update or initialize the word count data_x000D_
    $(this).data('wcount', words.length);_x000D_
    console.log('user tiped ' + words);_x000D_
    // do you stuff..._x000D_
});

<html lang="en">_x000D_
  <head>_x000D_
  <script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>_x000D_
  </head>_x000D_
  <body>_x000D_
  <input type="text" name="input" id="input">_x000D_
  </body>_x000D_
</html>

In addition to Mark's answer, you also need to be aware of scope, which (as in C/C++) is specified using braces. So:

if (textBox1.Text == "" || textBox1.Text == String.Empty || textBox1.TextLength == 0)
    textBox3.Text += "[-] Listbox is Empty!!!!\r\n";
return;

will always return at that point. However:

if (textBox1.Text == "" || textBox1.Text == String.Empty || textBox1.TextLength == 0)
{
    textBox3.Text += "[-] Listbox is Empty!!!!\r\n";
    return;
}

will only return if it goes into that if statement.

You could use getNetworkCountryIso() from TelephonyManager to get the country the phone is currently in (although apparently this is unreliable on CDMA networks).

You could try letting the stream throw an exception on failure:

std::ifstream f;
//prepare f to throw if failbit gets set
std::ios_base::iostate exceptionMask = f.exceptions() | std::ios::failbit;
f.exceptions(exceptionMask);

try {
  f.open(fileName);
}
catch (std::ios_base::failure& e) {
  std::cerr << e.what() << '\n';
}

e.what(), however, does not seem to be very helpful:

• I tried it on Win7, Embarcadero RAD Studio 2010 where it gives "ios_base::failbit set" whereas strerror(errno) gives "No such file or directory."
• On Ubuntu 13.04, gcc 4.7.3 the exception says "basic_ios::clear" (thanks to arne)

If e.what() does not work for you (I don't know what it will tell you about the error, since that's not standardized), try using std::make_error_condition (C++11 only):

catch (std::ios_base::failure& e) {
  if ( e.code() == std::make_error_condition(std::io_errc::stream) )
    std::cerr << "Stream error!\n"; 
  else
    std::cerr << "Unknown failure opening file.\n";
}

If you have a cancel button on your form, you can set the Form.CancelButton property to that button and then pressing escape will effectively 'click the button'.

If you don't have such a button, check out the Form.KeyPreview property.

Option 1 - Android PCAP

Limitation

Android PCAP should work so long as:

Your device runs Android 4.0 or higher (or, in theory, the few devices which run Android 3.2). Earlier versions of Android do not have a USB Host API

Option 2 - TcpDump

Limitation

Phone should be rooted

Option 3 - bitshark (I would prefer this)

Limitation

Phone should be rooted

Reason - the generated PCAP files can be analyzed in WireShark which helps us in doing the analysis.

Other Options without rooting your phone

1. tPacketCapture

https://play.google.com/store/apps/details?id=jp.co.taosoftware.android.packetcapture&hl=en

Advantages

Using tPacketCapture is very easy, captured packet save into a PCAP file that can be easily analyzed by using a network protocol analyzer application such as Wireshark.

2. You can route your android mobile traffic to PC and capture the traffic in the desktop using any network sniffing tool.

http://lifehacker.com/5369381/turn-your-windows-7-pc-into-a-wireless-hotspot

Among several options for shading and tinting:

• For shades, multiply each component by 1/4, 1/2, 3/4, etc., of its previous value. The smaller the factor, the darker the shade.

• For tints, calculate (255 - previous value), multiply that by 1/4, 1/2, 3/4, etc. (the greater the factor, the lighter the tint), and add that to the previous value (assuming each.component is a 8-bit integer).

Note that color manipulations (such as tints and other shading) should be done in linear RGB. However, RGB colors specified in documents or encoded in images and video are not likely to be in linear RGB, in which case a so-called inverse transfer function needs to be applied to each of the RGB color's components. This function varies with the RGB color space. For example, in the sRGB color space (which can be assumed if the RGB color space is unknown), this function is roughly equivalent to raising each sRGB color component (ranging from 0 through 1) to a power of 2.2. (Note that "linear RGB" is not an RGB color space.)

See also Violet Giraffe's comment about "gamma correction".

I have used the following before:

var my_form = $('#form-id');
var data = {};

$('input:not([type=checkbox]), input[type=checkbox]:selected, select, textarea', my_form).each(
    function() {
        var name = $(this).attr('name');
        var val = $(this).val();

        if (!data.hasOwnProperty(name)) {
            data[name] = new Array;
        }

        data[name].push(val);
    }
);

This is just written from memory, so might contain mistakes, but this should make an object called data that contains the values for all your inputs.

Note that you have to deal with checkboxes in a special way, to avoid getting the values of unchecked checkboxes. The same is probably true of radio inputs.

Also note using arrays for storing the values, as for one input name, you might have values from several inputs (checkboxes in particular).

Another nice way to put your logic in data is something like this:

# Initialization.
CAR_TYPES = {
  foo_type: ['honda', 'acura', 'mercedes'],
  bar_type: ['toyota', 'lexus']
  # More...
}
@type_for_name = {}
CAR_TYPES.each { |type, names| names.each { |name| @type_for_name[type] = name } }

case @type_for_name[car]
when :foo_type
  # do foo things
when :bar_type
  # do bar things
end

ng If else statement

ng-if="receiptData.cart == undefined ? close(): '' ;"

You get this error message if a Python file was closed from "the outside", i.e. not from the file object's close() method:

>>> f = open(".bashrc")
>>> os.close(f.fileno())
>>> del f
close failed in file object destructor:
IOError: [Errno 9] Bad file descriptor

The line del f deletes the last reference to the file object, causing its destructor file.__del__ to be called. The internal state of the file object indicates the file is still open since f.close() was never called, so the destructor tries to close the file. The OS subsequently throws an error because of the attempt to close a file that's not open.

Since the implementation of os.system() does not create any Python file objects, it does not seem likely that the system() call is the origin of the error. Maybe you could show a bit more code?

Incase arguments have spaces in it, you can pass like shown below.

java -jar myjar.jar 'first argument' 'second argument'

LocalDateTime is a date-time without a time-zone. You specified the time zone offset format symbol in the format, however, LocalDateTime doesn't have such information. That's why the error occured.

If you want time-zone information, you should use ZonedDateTime.

DateTimeFormatter FORMATTER = DateTimeFormatter.ofPattern("yyyyMMdd HH:mm:ss.SSSSSS Z");
ZonedDateTime.now().format(FORMATTER);
=> "20140829 14:12:22.122000 +09"

Here's how I do it in a bash script:

if ps ax | grep $0 | grep -v $$ | grep bash | grep -v grep
then
    echo "The script is already running."
    exit 1
fi

This allows me to use this snippet for any bash script. I needed to grep bash because when using with cron, it creates another process that executes it using /bin/sh.