You do not define a binding in your service's config, so you are getting the default values for wsHttpBinding, and the default value for securityMode\transport for that binding is Message.

Try copying your binding configuration from the client's config to your service config and assign that binding to the endpoint via the bindingConfiguration attribute:

<bindings>
  <wsHttpBinding>
    <binding name="ota2010AEndpoint" 
             .......>
      <readerQuotas maxDepth="32" ... />
        <reliableSession ordered="true" .... />
          <security mode="Transport">
            <transport clientCredentialType="None" proxyCredentialType="None"
                       realm="" />
            <message clientCredentialType="Windows" negotiateServiceCredential="true"
                     establishSecurityContext="true" />
          </security>
    </binding>
  </wsHttpBinding>
</bindings>    

(Snipped parts of the config to save space in the answer).

<service name="Synxis" behaviorConfiguration="SynxisWCF">
    <endpoint address="" name="wsHttpEndpoint" 
              binding="wsHttpBinding" 
              bindingConfiguration="ota2010AEndpoint"
              contract="Synxis" />

This will then assign your defined binding (with Transport security) to the endpoint.

In my case same error was caused by missing

[DataContract]
...
[DataMember] 

attributes in the returned data type.

Check for that and try addinging those and see if it helps.

You need to set basicHttpBinding -> MaxReceivedMessageSize in the client configuration.

Removing the name from your binding will make it apply to all endpoints, and should produce the desired results. As so:

<services>
  <service name="Service.IService">
    <clear />
    <endpoint binding="basicHttpBinding" contract="Service.IService" />
  </service>
</services>
<bindings>
  <basicHttpBinding>
    <binding maxBufferSize="2147483647" maxReceivedMessageSize="2147483647">
      <readerQuotas maxDepth="32" maxStringContentLength="2147483647"
        maxArrayLength="16348" maxBytesPerRead="4096" maxNameTableCharCount="16384" />
    </binding>
  </basicHttpBinding>
  <webHttpBinding>
    <binding maxBufferSize="2147483647" maxReceivedMessageSize="2147483647" />
  </webHttpBinding>
</bindings>

Also note that I removed the bindingConfiguration attribute from the endpoint node. Otherwise you would get an exception.

This same solution was found here : Problem with large requests in WCF

For more insight into this issue, also see: An existing connection was forcibly closed by the remote host - WCF

My problem ended up being that my data transfer objects were too complex. Start withsimple properties like public long Id { get; set; } and once you get that working than start adding additional stuff as needed.

You need to make the changes in the binding configuration (in the app.config file) on the SERVER and the CLIENT, or it will not take effect.

<system.serviceModel>
    <bindings>
        <basicHttpBinding>
            <binding maxReceivedMessageSize="2147483647 " max...=... />
        </basicHttpBinding>
       </bindings>
</system.serviceModel>

I tried all the suggestions above, but what worked in the end was changing the Application Pool managed pipeline from Integrated mode to Classic mode.
It runs in its own application pool - but it was the first .NET 4.0 service - all other servicves are on .NET 2.0 using Integrated pipeline mode. Its just a standard WCF service using is https - but on Server 2008 (not R2) - using IIS 7 (not 7.5) .

We store our URLs in a database and load them at runtime.

public class ServiceClientFactory<TChannel> : ClientBase<TChannel> where TChannel : class
{
    public TChannel Create(string url)
    {
        this.Endpoint.Address = new EndpointAddress(new Uri(url));
        return this.Channel;
    }
}

Implementation

var client = new ServiceClientFactory<yourServiceChannelInterface>().Create(newUrl);

I have had this issue before.

client.ClientCredentials.Windows.AllowedImpersonationLevel = TokenImpersonationLevel.Impersonation;

do this against your wcf proxy before making the call.

In your binding configuration, there are four timeout values you can tweak:

<bindings>
  <basicHttpBinding>
    <binding name="IncreasedTimeout"
             sendTimeout="00:25:00">
    </binding>
  </basicHttpBinding>

The most important is the sendTimeout, which says how long the client will wait for a response from your WCF service. You can specify hours:minutes:seconds in your settings - in my sample, I set the timeout to 25 minutes.

The openTimeout as the name implies is the amount of time you're willing to wait when you open the connection to your WCF service. Similarly, the closeTimeout is the amount of time when you close the connection (dispose the client proxy) that you'll wait before an exception is thrown.

The receiveTimeout is a bit like a mirror for the sendTimeout - while the send timeout is the amount of time you'll wait for a response from the server, the receiveTimeout is the amount of time you'll give you client to receive and process the response from the server.

In case you're send back and forth "normal" messages, both can be pretty short - especially the receiveTimeout, since receiving a SOAP message, decrypting, checking and deserializing it should take almost no time. The story is different with streaming - in that case, you might need more time on the client to actually complete the "download" of the stream you get back from the server.

There's also openTimeout, receiveTimeout, and closeTimeout. The MSDN docs on binding gives you more information on what these are for.

To get a serious grip on all the intricasies of WCF, I would strongly recommend you purchase the "Learning WCF" book by Michele Leroux Bustamante:

Learning WCF http://ecx.images-amazon.com/images/I/51GNuqUJq%2BL._BO2,204,203,200_PIsitb-sticker-arrow-click,TopRight,35,-76_AA240_SH20_OU01_.jpg

and you also spend some time watching her 15-part "WCF Top to Bottom" screencast series - highly recommended!

For more advanced topics I recommend that you check out Juwal Lowy's Programming WCF Services book.

Programming WCF http://ecx.images-amazon.com/images/I/41odWcLoGAL._BO2,204,203,200_PIsitb-sticker-arrow-click,TopRight,35,-76_AA240_SH20_OU01_.jpg

Although your problem was solved with one of the above solutions, for the benefit of others, here's another option.

You also can get this exception when incorrect credentials are passed to a basic endpoint (SOAP 1.1) that uses username message credentials as you are. For example, if you are calling the service from code and do something like this:

var service = new TestService();

service.ClientCredentials.UserName.UserName = "InvalidUser";
service.ClientCredentials.UserName.Password = "InvalidPass";

This is different from a WSHTTP endpoint (SOAP 1.2) that throws an AccessDeniedException when invalid credentials are passed through. I personally find the message contained herein a little misleading (it certainly cost me a few minutes the first time I encountered it for this reason) but the underlying cause was clear once I consulted the WCF Diagnostic Trace Logs.

Another possible solution to this error that I found. Might not have answered OP's exact question but may help others who stumble across this error message.

I was creating my Client in code using WebHttpBinding, in order to replicate the following line:

<security mode="TransportCredentialOnly">
  <transport clientCredentialType="Windows" proxyCredentialType="Windows" />
</security>

I had to do:

var binding = new WebHttpBinding(WebHttpSecurityMode.TransportCredentialOnly);
                binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.Windows;
                binding.Security.Transport.ProxyCredentialType = HttpProxyCredentialType.Windows;

as well as setting proxy.ClientCredentials.Windows.AllowedImpersonationLevel = System.Security.Principal.TokenImpersonationLevel.Impersonation;

Confirmed my fix:

In your web.config file you should configure it to look as such:

<system.serviceModel >
    <serviceHostingEnvironment configSource=".\Configurations\ServiceHosting.config" />
    ...

Then, build a folder structure that looks like this:

/web.config
/Configurations/ServiceHosting.config
/Configurations/Deploy/ServiceHosting.config

The base serviceHosting.config should look like this:

<?xml version="1.0"?>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true">
    <baseAddressPrefixFilters>
    </baseAddressPrefixFilters>
</serviceHostingEnvironment>

while the one in /Deploy looks like this:

<serviceHostingEnvironment aspNetCompatibilityEnabled="true">
    <baseAddressPrefixFilters>
        <add prefix="http://myappname.web707.discountasp.net"/>
    </baseAddressPrefixFilters>
</serviceHostingEnvironment>

Beyond this, you need to add a manual or automated deployment step to copy the file from /Deploy overtop the one in /Configurations. This works incredibly well for service address and connection strings, and saves effort doing other workarounds.

If you don't like this approach (which scales well to farms, but is weaker on single machine), you might consider adding a web.config file a level up from the service deployment on the host's machine and put the serviceHostingEnvironment node there. It should cascade for you.

In my case, it was not working even after trying all solutions and setting all limits to max. In last I found out that a Microsoft IIS filtering module Url Scan 3.1 was installed on IIS/website, which have it's own limit to reject incoming requests based on content size and return "404 Not found page".

It's limit can be updated in %windir%\System32\inetsrv\urlscan\UrlScan.ini file by setting MaxAllowedContentLength to the required value.

For eg. following will allow upto 300 mb requests

MaxAllowedContentLength=314572800

Hope it will help someone!

Look at your base address and your endpoint address (can't see it in your sample code). most likely you missed a column or some other typo e.g. https// instead of https://

Mine was offline.

I unpluged and pluged again but with the mobile awake, a window opened asking permission.

So try to plug and unplug but with the phone awake.

Unfortunately you can't use that tuple assignment syntax in (ECMA|Java)Script.

EDIT: Someone linked to Mozilla/JS 1.7 - this wouldn't work cross-browser but if that is not required then there's your answer.

Nice answers. You could also set Jobs (i.e., commands) with "Crontab" for more flexibility (which provides different options to run scripts, loggin the outputs, etc.), although it requires more time to be understood and set properly:

• How to run a command on startup in Ubuntu?

• The Beginners Guide To Cron Jobs

Using '@reboot' you can Run a command once, at startup.

Wrapping up: run $ sudo crontab -e -u root

And add a line at the end of the file with your command as follows:

@reboot sudo searchd

If you've done all this and it still doesn't work, check the expiry for that user:

Postgres password authentication fails

$excel = new PHPExcel();
header('Content-Type: application/vnd.ms-excel');
header('Content-Disposition: attachment;filename="your_name.xls"');
header('Cache-Control: max-age=0');

// Do your stuff here

$writer = PHPExcel_IOFactory::createWriter($excel, 'Excel5');

// This line will force the file to download
$writer->save('php://output');

Well, you're on the right path, Benno!

There are some tips regarding VBA programming that might help you out.

1. Use always explicit references to the sheet you want to interact with. Otherwise, Excel may 'assume' your code applies to the active sheet and eventually you'll see it screws your spreadsheet up.

2. As lionz mentioned, get in touch with the native methods Excel offers. You might use them on most of your tricks.

3. Explicitly declare your variables... they'll show the list of methods each object offers in VBA. It might save your time digging on the internet.

Now, let's have a draft code...

Remember this code must be within the Excel Sheet object, as explained by lionz. It only applies to Sheet 2, is up to you to adapt it to both Sheet 2 and Sheet 3 in the way you prefer.

Hope it helps!

Private Sub Worksheet_Change(ByVal Target As Range)

    Dim oSheet As Excel.Worksheet

    'We only want to do something if the changed cell is B6, right?
    If Target.Address = "$B$6" Then

        'Checks if it's a number...
        If IsNumeric(Target.Value) Then

            'Let's avoid values out of your bonds, correct?
            If Target.Value > 0 And Target.Value < 51 Then

                'Let's assign the worksheet we'll show / hide rows to one variable and then
                '   use only the reference to the variable itself instead of the sheet name.
                '   It's safer.

                'You can alternatively replace 'sheet 2' by 2 (without quotes) which will represent
                '   the sheet index within the workbook
                Set oSheet = ActiveWorkbook.Sheets("Sheet 2")

                'We'll unhide before hide, to ensure we hide the correct ones
                oSheet.Range("A7:A56").EntireRow.Hidden = False

                oSheet.Range("A" & Target.Value + 7 & ":A56").EntireRow.Hidden = True

            End If

        End If

    End If

End Sub

To both check if it exists and create if it doesn't, including intermediaries:

QDir dir("path/to/dir");
if (!dir.exists())
    dir.mkpath(".");

.yaml is apparently the official extension, because some applications fail when using .yml. On the other hand I am not familiar with any applications which use YAML code, but fail with a .yaml extension.

I just stumbled across this, as I was used to writing .yml in Ansible and Docker Compose. Out of habit I used .yml when writing Netplan files which failed silently. I finally figured out my mistake. The author of a popular Ansible Galaxy role for Netplan makes the same assumption in his code:

- name: Capturing Existing Configurations
  find:
    paths: /etc/netplan
    patterns: "*.yml,*.yaml"
  register: _netplan_configs

Yet any files with a .yml extension get ignored by Netplan in the same way as files with a .bak extension. As Netplan is very quiet, and gives no feedback whatsoever on success, even with netplan apply --debug, a config such as 01-netcfg.yml will fail silently without any meaningful feedback.

this in JavaScript always refers to the 'owner' of the function that is being executed.

If no explicit owner is defined, then the top most owner, the window object, is referenced.

So if I did

function someKindOfFunction() {
   this.style = 'foo';
}

element.onclick = someKindOfFunction;

this would refer to the element object. But be careful, a lot of people make this mistake.

<element onclick="someKindOfFunction()">

In the latter case, you merely reference the function, not hand it over to the element. Therefore, this will refer to the window object.

If anyone has problems with using a custom dateformat for java.sql.Date, this is the simplest solution:

ObjectMapper mapper = new ObjectMapper();
SimpleModule module = new SimpleModule();
module.addSerializer(java.sql.Date.class, new DateSerializer());
mapper.registerModule(module);

(This SO-answer saved me a lot of trouble: https://stackoverflow.com/a/35212795/3149048 )

Jackson uses the SqlDateSerializer by default for java.sql.Date, but currently, this serializer doesn't take the dateformat into account, see this issue: https://github.com/FasterXML/jackson-databind/issues/1407 . The workaround is to register a different serializer for java.sql.Date as shown in the code example.

std::string::compare() returns an int:

• equal to zero if s and t are equal,
• less than zero if s is less than t,
• greater than zero if s is greater than t.

If you want your first code snippet to be equivalent to the second one, it should actually read:

if (!s.compare(t)) {
    // 's' and 't' are equal.
}

The equality operator only tests for equality (hence its name) and returns a bool.

To elaborate on the use cases, compare() can be useful if you're interested in how the two strings relate to one another (less or greater) when they happen to be different. PlasmaHH rightfully mentions trees, and it could also be, say, a string insertion algorithm that aims to keep the container sorted, a dichotomic search algorithm for the aforementioned container, and so on.

EDIT: As Steve Jessop points out in the comments, compare() is most useful for quick sort and binary search algorithms. Natural sorts and dichotomic searches can be implemented with only std::less.

You can use a JS and SCSS/Fontawesome combination for the Prev/Next buttons.

In your JS (this includes screenreader only/accessibility classes with Zurb Foundation):

$('.whatever-carousel').owlCarousel({
    ... ...
    navText: ["<span class='show-for-sr'>Previous</span>","<span class='show-for-sr'>Next</span>"]
    ... ...
})

In your SCSS this:

.owl-theme {

    .owl-nav {
        .owl-prev,
        .owl-next {
            font-family: FontAwesome;
            //border-radius: 50%;
            //padding: whatever-to-get-a-circle;
            transition: all, .2s, ease;
        }
        .owl-prev {
            &::before {
                content: "\f104";
            }
        }
        .owl-next {
            &::before {
                content: "\f105";
            }
        }
    }
}

For the FontAwesome font-family I happen to use the embed code in the document header:

<script src="//use.fontawesome.com/123456whatever.js"></script>

There are various ways to include FA, strokes/folks, but I find this is pretty fast and as I'm using webpack I can just about live with that 1 extra js server call.

And to update this - there's also this JS option for slightly more complex arrows, still with accessibility in mind:

$('.whatever-carousel').owlCarousel({
    navText: ["<span class=\"fa-stack fa-lg\" aria-hidden=\"true\"><span class=\"show-for-sr\">Previous</span><i class=\"fa fa-circle fa-stack-2x\"></i><i class=\"fa fa-chevron-left fa-stack-1x fa-inverse\" aria-hidden=\"true\"></i></span>","<span class=\"fa-stack fa-lg\" aria-hidden=\"true\"><span class=\"show-for-sr\">Next</span><i class=\"fa fa-circle fa-stack-2x\"></i><i class=\"fa fa-chevron-right fa-stack-1x fa-inverse\" aria-hidden=\"true\"></i></span>"]
})

Loads of escaping there, use single quotes instead if preferred.

And in the SCSS just comment out the ::before attrs:

.owl-prev {
        //&::before { content: "\f104"; }
    }
    .owl-next {
        //&::before { content: "\f105"; }
    }

check this out: http://hayageek.com/docs/jquery-upload-file.php I've found it accidentally on the net.

This worked for me(in Chrome):

Login to phpmyadmin, and follow "Home" -> "Privileges" -> "Reload the Privileges". After this, clear your browser's cache and retry.

Regards, Pedro Sousa

One crucial thing to remember for those working with a Console application to host the WCF service is that the Web.config file in the WCF project is completely ignored. If your system.serviceModel configuration is there, then you need to move that section of config to the App.config of your Console project.

This is in addition to the answers concerning ensuring the namespace is specified in the right places.

Note: Avoid using python setup.py install use pip install .

You need to remove all files manually, and also undo any other stuff that installation did manually.

If you don't know the list of all files, you can reinstall it with the --record option, and take a look at the list this produces.

To record a list of installed files, you can use:

python setup.py install --record files.txt

Once you want to uninstall you can use xargs to do the removal:

xargs rm -rf < files.txt

Or if you're running Windows, use Powershell:

Get-Content files.txt | ForEach-Object {Remove-Item $_ -Recurse -Force}

Then delete also the containing directory, e.g. /Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7/site-packages/my_module-0.1.egg/ on macOS. It has no files, but Python will still import an empty module:

>>> import my_module
>>> my_module.__file__
None

Once deleted, Python shows:

>>> import my_module
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
ModuleNotFoundError: No module named 'my_module'

Once you have cloned the repo, you have everything: you can then hg up branchname or hg up tagname to update your working copy.

UP: hg up is a shortcut of hg update, which also has hg checkout alias for people with git habits.

It's not generally correct that you can "remove an item from a database" with both methods. To be precise it is like so:

• ObjectContext.DeleteObject(entity) marks the entity as Deleted in the context. (It's EntityState is Deleted after that.) If you call SaveChanges afterwards EF sends a SQL DELETE statement to the database. If no referential constraints in the database are violated the entity will be deleted, otherwise an exception is thrown.

• EntityCollection.Remove(childEntity) marks the relationship between parent and childEntity as Deleted. If the childEntity itself is deleted from the database and what exactly happens when you call SaveChanges depends on the kind of relationship between the two:

  • If the relationship is optional, i.e. the foreign key that refers from the child to the parent in the database allows NULL values, this foreign will be set to null and if you call SaveChanges this NULL value for the childEntity will be written to the database (i.e. the relationship between the two is removed). This happens with a SQL UPDATE statement. No DELETE statement occurs.

  • If the relationship is required (the FK doesn't allow NULL values) and the relationship is not identifying (which means that the foreign key is not part of the child's (composite) primary key) you have to either add the child to another parent or you have to explicitly delete the child (with DeleteObject then). If you don't do any of these a referential constraint is violated and EF will throw an exception when you call SaveChanges - the infamous "The relationship could not be changed because one or more of the foreign-key properties is non-nullable" exception or similar.

  • If the relationship is identifying (it's necessarily required then because any part of the primary key cannot be NULL) EF will mark the childEntity as Deleted as well. If you call SaveChanges a SQL DELETE statement will be sent to the database. If no other referential constraints in the database are violated the entity will be deleted, otherwise an exception is thrown.

I am actually a bit confused about the Remarks section on the MSDN page you have linked because it says: "If the relationship has a referential integrity constraint, calling the Remove method on a dependent object marks both the relationship and the dependent object for deletion.". This seems unprecise or even wrong to me because all three cases above have a "referential integrity constraint" but only in the last case the child is in fact deleted. (Unless they mean with "dependent object" an object that participates in an identifying relationship which would be an unusual terminology though.)

When there is a very complex (especially asynchronous) validation process, there is a simple workaround:

<form id="form1">
<input type="button" onclick="javascript:submitIfVeryComplexValidationIsOk()" />
<input type="submit" id="form1_submit_hidden" style="display:none" />
</form>
...
<script>
function submitIfVeryComplexValidationIsOk() {
    var form1 = document.forms['form1']
    if (!form1.checkValidity()) {
        $("#form1_submit_hidden").click()
        return
    }

    if (checkForVeryComplexValidation() === 'Ok') {
         form1.submit()
    } else {
         alert('form is invalid')
    }
}
</script>

You have a List<string> - so if you want them concatenated, something like

string s = string.Join("", list);

would work (in .NET 4.0 at least). The first parameter is the delimiter. So you could also comma-delimit etc.

You might also want to look at using StringBuilder to do running concatenations, rather than forming a list.

You could fill the dependend cell (D2) by a User Defined Function (VBA Macro Function) that takes the value of the C2-Cell as input parameter, returning the current date as ouput.

Having C2 as input parameter for the UDF in D2 tells Excel that it needs to reevaluate D2 everytime C2 changes (that is if auto-calculation of formulas is turned on for the workbook).

EDIT:

Here is some code:

For the UDF:

    Public Function UDF_Date(ByVal data) As Date

        UDF_Date = Now()

    End Function

As Formula in D2:

=UDF_Date(C2)

You will have to give the D2-Cell a Date-Time Format, or it will show a numeric representation of the date-value.

And you can expand the formula over the desired range by draging it if you keep the C2 reference in the D2-formula relative.

Note: This still might not be the ideal solution because every time Excel recalculates the workbook the date in D2 will be reset to the current value. To make D2 only reflect the last time C2 was changed there would have to be some kind of tracking of the past value(s) of C2. This could for example be implemented in the UDF by providing also the address alonside the value of the input parameter, storing the input parameters in a hidden sheet, and comparing them with the previous values everytime the UDF gets called.

Addendum:

Here is a sample implementation of an UDF that tracks the changes of the cell values and returns the date-time when the last changes was detected. When using it, please be aware that:

• The usage of the UDF is the same as described above.

• The UDF works only for single cell input ranges.

• The cell values are tracked by storing the last value of cell and the date-time when the change was detected in the document properties of the workbook. If the formula is used over large datasets the size of the file might increase considerably as for every cell that is tracked by the formula the storage requirements increase (last value of cell + date of last change.) Also, maybe Excel is not capable of handling very large amounts of document properties and the code might brake at a certain point.

• If the name of a worksheet is changed all the tracking information of the therein contained cells is lost.

• The code might brake for cell-values for which conversion to string is non-deterministic.

• The code below is not tested and should be regarded only as proof of concept. Use it at your own risk.

  Public Function UDF_Date(ByVal inData As Range) As Date
  
      Dim wb As Workbook
      Dim dProps As DocumentProperties
      Dim pValue As DocumentProperty
      Dim pDate As DocumentProperty
      Dim sName As String
      Dim sNameDate As String
  
      Dim bDate As Boolean
      Dim bValue As Boolean
      Dim bChanged As Boolean
  
      bDate = True
      bValue = True
  
      bChanged = False
  
  
      Dim sVal As String
      Dim dDate As Date
  
      sName = inData.Address & "_" & inData.Worksheet.Name
      sNameDate = sName & "_dat"
  
      sVal = CStr(inData.Value)
      dDate = Now()
  
      Set wb = inData.Worksheet.Parent
  
      Set dProps = wb.CustomDocumentProperties
  
  On Error Resume Next
  
      Set pValue = dProps.Item(sName)
  
      If Err.Number <> 0 Then
          bValue = False
          Err.Clear
      End If
  
  On Error GoTo 0
  
      If Not bValue Then
          bChanged = True
          Set pValue = dProps.Add(sName, False, msoPropertyTypeString, sVal)
      Else
          bChanged = pValue.Value <> sVal
          If bChanged Then
              pValue.Value = sVal
          End If
      End If
  
  On Error Resume Next
  
      Set pDate = dProps.Item(sNameDate)
  
      If Err.Number <> 0 Then
          bDate = False
          Err.Clear
      End If
  
  On Error GoTo 0
  
      If Not bDate Then
          Set pDate = dProps.Add(sNameDate, False, msoPropertyTypeDate, dDate)
      End If
  
      If bChanged Then
          pDate.Value = dDate
      Else
          dDate = pDate.Value
      End If
  
  
      UDF_Date = dDate
   End Function
  

Make the insertion of the date conditional upon the range.

This has an advantage of not changing the dates unless the content of the cell is changed, and it is in the range C2:C2, even if the sheet is closed and saved, it doesn't recalculate unless the adjacent cell changes.

Adapted from this tip and @Paul S answer

Private Sub Worksheet_Change(ByVal Target As Range)
 Dim R1 As Range
 Dim R2 As Range
 Dim InRange As Boolean
    Set R1 = Range(Target.Address)
    Set R2 = Range("C2:C20")
    Set InterSectRange = Application.Intersect(R1, R2)

  InRange = Not InterSectRange Is Nothing
     Set InterSectRange = Nothing
   If InRange = True Then
     R1.Offset(0, 1).Value = Now()
   End If
     Set R1 = Nothing
     Set R2 = Nothing
 End Sub

Here's a 2020 answer with a Hook:

function useDragging() {
  const [isDragging, setIsDragging] = useState(false);
  const [pos, setPos] = useState({ x: 0, y: 0 });
  const ref = useRef(null);

  function onMouseMove(e) {
    if (!isDragging) return;
    setPos({
      x: e.x - ref.current.offsetWidth / 2,
      y: e.y - ref.current.offsetHeight / 2,
    });
    e.stopPropagation();
    e.preventDefault();
  }

  function onMouseUp(e) {
    setIsDragging(false);
    e.stopPropagation();
    e.preventDefault();
  }

  function onMouseDown(e) {
    if (e.button !== 0) return;
    setIsDragging(true);

    setPos({
      x: e.x - ref.current.offsetWidth / 2,
      y: e.y - ref.current.offsetHeight / 2,
    });

    e.stopPropagation();
    e.preventDefault();
  }

  // When the element mounts, attach an mousedown listener
  useEffect(() => {
    ref.current.addEventListener("mousedown", onMouseDown);

    return () => {
      ref.current.removeEventListener("mousedown", onMouseDown);
    };
  }, [ref.current]);

  // Everytime the isDragging state changes, assign or remove
  // the corresponding mousemove and mouseup handlers
  useEffect(() => {
    if (isDragging) {
      document.addEventListener("mouseup", onMouseUp);
      document.addEventListener("mousemove", onMouseMove);
    } else {
      document.removeEventListener("mouseup", onMouseUp);
      document.removeEventListener("mousemove", onMouseMove);
    }
    return () => {
      document.removeEventListener("mouseup", onMouseUp);
      document.removeEventListener("mousemove", onMouseMove);
    };
  }, [isDragging]);

  return [ref, pos.x, pos.y, isDragging];
}

Then a component that uses the hook:

function Draggable() {
  const [ref, x, y, isDragging] = useDragging();

  return (
    <div
      ref={ref}
      style={{
        position: "absolute",
        width: 50,
        height: 50,
        background: isDragging ? "blue" : "gray",
        left: x,
        top: y,
      }}
    ></div>
  );
}

This is called type conversion :

i := 23
var i64 int64
i64 = int64(i)

In Oracle 12c you can use the function STANDARD_HASH. It does not require any additional privileges.

select standard_hash('foo', 'MD5') from dual;

The dbms_obfuscation_toolkit is deprecated (see Note here). You can use DBMS_CRYPTO directly:

select rawtohex(
    DBMS_CRYPTO.Hash (
        UTL_I18N.STRING_TO_RAW ('foo', 'AL32UTF8'),
        2)
    ) from dual;

Output:

ACBD18DB4CC2F85CEDEF654FCCC4A4D8

Add a lower function call if needed. More on DBMS_CRYPTO.

The removeClass function takes a function argument since jQuery 1.4.

$("#hello").removeClass (function (index, className) {
    return (className.match (/(^|\s)color-\S+/g) || []).join(' ');
});

Live example: http://jsfiddle.net/xa9xS/1409/

This works:

sc.exe config "[servicename]" obj= "[.\username]" password= "[password]"

Where each of the [bracketed] items are replaced with the true arguments. (Keep the quotes, but don't keep the brackets.)

Just keep in mind that:

• The spacing in the above example matters. obj= "foo" is correct; obj="foo" is not.
• '.' is an alias to the local machine, you can specify a domain there (or your local computer name) if you wish.
• Passwords aren't validated until the service is started
• Quote your parameters, as above. You can sometimes get by without quotes, but good luck.

Generally if the installation went smoothly, it will create the desktop icons/folders. Maybe check the installation summary log to see if there's any underlying errors.

It should be located C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log(date stamp)\

You can try like following:

string output = JsonConvert.SerializeObject(jsonStr);

In Java we can do it using the following statement . We need to use Jackson ObjectMapper for the same and provide the HashMap.class as the mapping class. Finally store the result as a HashMap object.

HashMap<String,String> hashMap = new ObjectMapper().readValue(jsonString, HashMap.class);

Yes, you very well can learn C using Visual Studio.

Visual Studio comes with its own C compiler, which is actually the C++ compiler. Just use the .c file extension to save your source code.

You don't have to be using the IDE to compile C. You can write the source in Notepad, and compile it in command line using Developer Command Prompt which comes with Visual Studio.

Open the Developer Command Prompt, enter the directory you are working in, use the cl command to compile your C code.

For example, cl helloworld.c compiles a file named helloworld.c.

Refer this for more information: Walkthrough: Compiling a C Program on the Command Line

Hope this helps

try this

  function sum() {
       var txtFirstNumberValue = document.getElementById('txt1').value;
       var txtSecondNumberValue = document.getElementById('txt2').value;
       if (txtFirstNumberValue == "")
           txtFirstNumberValue = 0;
       if (txtSecondNumberValue == "")
           txtSecondNumberValue = 0;

       var result = parseInt(txtFirstNumberValue) + parseInt(txtSecondNumberValue);
       if (!isNaN(result)) {
           document.getElementById('txt3').value = result;
       }
   }

You can use math.ceil() to round up, and then multiply by 10

import math

def roundup(x):
    return int(math.ceil(x / 10.0)) * 10

To use just do

>>roundup(45)
50

In C++11

I would use general algorithms like for_each to avoid searching for the right type of iterator and lambda expression to avoid extra named functions/objects.

The short "pretty" example for your particular case (assuming polygon is a vector of integers):

for_each(polygon.begin(), polygon.end(), [&sum](int i){ sum += i; });

tested on: http://ideone.com/i6Ethd

Dont' forget to include: algorithm and, of course, vector :)

Microsoft has actually also a nice example on this:
source: http://msdn.microsoft.com/en-us/library/dd293608.aspx

#include <algorithm>
#include <iostream>
#include <vector>
using namespace std;

int main() 
{
   // Create a vector object that contains 10 elements.
   vector<int> v;
   for (int i = 1; i < 10; ++i) {
      v.push_back(i);
   }

   // Count the number of even numbers in the vector by 
   // using the for_each function and a lambda.
   int evenCount = 0;
   for_each(v.begin(), v.end(), [&evenCount] (int n) {
      cout << n;
      if (n % 2 == 0) {
         cout << " is even " << endl;
         ++evenCount;
      } else {
         cout << " is odd " << endl;
      }
   });

   // Print the count of even numbers to the console.
   cout << "There are " << evenCount 
        << " even numbers in the vector." << endl;
}

You push your local repository to the remote repository using the git push command after first establishing a relationship between the two with the git remote add [alias] [url] command. If you visit your Github repository, it will show you the URL to use for pushing. You'll first enter something like:

git remote add origin [email protected]:username/reponame.git

Unless you started by running git clone against the remote repository, in which case this step has been done for you already.

And after that, you'll type:

git push origin master

After your first push, you can simply type:

git push

when you want to update the remote repository in the future.

var 
         /**
         * Parses time in milliseconds to time structure
         * @param {Number} ms
         * @returns {Object} timeStruct
         * @return {Integer} timeStruct.d days
         * @return  {Integer} timeStruct.h hours
         * @return  {Integer} timeStruct.m minutes
         * @return  {Integer} timeStruct.s seconds
         */
        millisecToTimeStruct = function (ms) {
            var d, h, m, s;
            if (isNaN(ms)) {
                return {};
            }
            d = ms / (1000 * 60 * 60 * 24);
            h = (d - ~~d) * 24;
            m = (h - ~~h) * 60;
            s = (m - ~~m) * 60;
            return {d: ~~d, h: ~~h, m: ~~m, s: ~~s};
        },

        toFormattedStr = function(tStruct){
           var res = '';
           if (typeof tStruct === 'object'){
               res += tStruct.m + ' min. ' + tStruct.s + ' sec.';
           }
           return res;
        };

// client code:
var
        ms = new Date().getTime(),
        timeStruct = millisecToTimeStruct(ms),
        formattedString = toFormattedStr(timeStruct);
alert(formattedString);

By setting the scale, you decrease the precision. Try NUMBER(16,2).

//form/descendant::input[@type='submit']

Yes. You need to prefix the table name with "#" (hash) to create temporary tables.

If you do NOT need the table later, go ahead & create it. Temporary Tables are very much like normal tables. However, it gets created in tempdb. Also, it is only accessible via the current session i.e. For EG: if another user tries to access the temp table created by you, he'll not be able to do so.

"##" (double-hash creates "Global" temp table that can be accessed by other sessions as well.

Refer the below link for the Basics of Temporary Tables: http://www.codeproject.com/Articles/42553/Quick-Overview-Temporary-Tables-in-SQL-Server-2005

If the content of your table is less than 5000 rows & does NOT contain data types such as nvarchar(MAX), varbinary(MAX), consider using Table Variables.

They are the fastest as they are just like any other variables which are stored in the RAM. They are stored in tempdb as well, not in RAM.

DECLARE @ItemBack1 TABLE
(
 column1 int,
 column2 int,
 someInt int,
 someVarChar nvarchar(50)
);

INSERT INTO @ItemBack1
SELECT column1, 
       column2, 
       someInt, 
       someVarChar 
  FROM table2
 WHERE table2.ID = 7;

More Info on Table Variables: http://odetocode.com/articles/365.aspx

I use Eclipse CDT and Qt Creator (for Qt applications).

That's my preferences. It's a very suggestive question and there is as many answers as there is developers. :)

For those having the same glitch with <LinearLayout...> as I did:

It is important to specify android:layout_width="fill_parent", it will not work with wrap_content.

OTOH, you may omit android:layout_weight = "0", it is not required.

My code is basically the same as the code in https://stackoverflow.com/a/25781167/755804 (by Vivek Pandey)

It's the part of the .NET Framework that isn't contained within the Client Profile. See MSDN for more info; specifically:

The .NET Framework is made up of the .NET Framework 4 Client Profile and .NET Framework 4 Extended components that exist separately in Programs and Features.

.NET Core

To remove the Server header, within the Program.cs file, add the following option:

.UseKestrel(opt => opt.AddServerHeader = false)

For dot net core 1, put add the option inside the .UseKestrel() call. For dot net core 2, add the line after UseStartup().

To remove X-Powered-By header, if deployed to IIS, edit your web.config and add the following section inside the system.webServer tag:

<httpProtocol>
    <customHeaders>
        <remove name="X-Powered-By" />
    </customHeaders>
</httpProtocol>

.NET 4.5.2

To remove the Server header, within your global.asax file add the following:

    protected void Application_BeginRequest(object sender, EventArgs e)
    {
        string[] headers = { "Server", "X-AspNet-Version" };

        if (!Response.HeadersWritten)
        {
            Response.AddOnSendingHeaders((c) =>
            {
                if (c != null && c.Response != null && c.Response.Headers != null)
                {
                    foreach (string header in headers)
                    {
                        if (c.Response.Headers[header] != null)
                        {
                            c.Response.Headers.Remove(header);
                        }
                    }
                }
            });
        }

    }

Pre .NET 4.5.2

Add the following c# class to your project:

public class RemoveServerHeaderModule : IHttpModule
{
    public void Init(HttpApplication context)
    {
        context.PreSendRequestHeaders += OnPreSendRequestHeaders;
    }

    public void Dispose() { }

    void OnPreSendRequestHeaders(object sender, EventArgs e)
    {
        HttpContext.Current.Response.Headers.Remove("Server");
    }
}

and then within your web.config add the following <modules> section:

<system.webServer>
    ....
 <modules>
    <add name="RemoveServerHeaderModule" type="MyNamespace.RemoveServerHeaderModule" />
 </modules>

However I had a problem where sub-projects couldn't find this module. Not fun.

Removing X-AspNetMvc-Version header

To remove the ''X-AspNetMvc-Version'' tag, for any version of .NET, modify your ''web.config'' file to include:

<system.web>
...
   <httpRuntime enableVersionHeader="false" />
...
</system.web>

Thanks Microsoft for making this unbelievably difficult. Or maybe that was your intention so that you could track IIS and MVC installs across the world ...

I personally don't like atoi function. I would suggest sscanf:

char myarray[5] = {'-', '1', '2', '3', '\0'};
int i;
sscanf(myarray, "%d", &i);

It's very standard, it's in the stdio.h library :)

And in my opinion, it allows you much more freedom than atoi, arbitrary formatting of your number-string, and probably also allows for non-number characters at the end.

EDIT I just found this wonderful question here on the site that explains and compares 3 different ways to do it - atoi, sscanf and strtol. Also, there is a nice more-detailed insight into sscanf (actually, the whole family of *scanf functions).

EDIT2 Looks like it's not just me personally disliking the atoi function. Here's a link to an answer explaining that the atoi function is deprecated and should not be used in newer code.

I have also faced the same problem and this is how i resolved it.

1. First of all you need to make sure that your node and npm versions are up to date. if not please upgrade your node and npm packages to latest versions.

   nvm install 12.18.3 // update node version through node version manager
   
   npm install npm // update your npm version to latest
   

2. Delete your node_modules folder and package-lock.json file.

3. Force clean the entire NPM cache by using following comand.

   npm cache clean --force
   

4. Re-Install all the dependencies.

   npm install
   

5. If above step didn't resolve your problem, try to re-install your dependencies after executing following command.

   npm rebuild
   

If you just want to append a class in case of an error you can use th:errorclass="my-error-class" mentionned in the doc.

<input type="text" th:field="*{datePlanted}" class="small" th:errorclass="fieldError" />

Applied to a form field tag (input, select, textarea…), it will read the name of the field to be examined from any existing name or th:field attributes in the same tag, and then append the specified CSS class to the tag if such field has any associated errors

and if you want to check div has a perticular children(say <p> use:

if ($('#myfav').children('p').length > 0) {
     // do something
}

Inlining is a suggestion to the compiler which it is free to ignore. It's ideal for small bits of code.

If your function is inlined, it's basically inserted in the code where the function call is made to it, rather than actually calling a separate function. This can assist with speed as you don't have to do the actual call.

It also assists CPUs with pipelining as they don't have to reload the pipeline with new instructions caused by a call.

The only disadvantage is possible increased binary size but, as long as the functions are small, this won't matter too much.

I tend to leave these sorts of decisions to the compilers nowadays (well, the smart ones anyway). The people who wrote them tend to have far more detailed knowledge of the underlying architectures.

I recently faced this issue. I have 3 java applications that start with 1024m or 1280m heap size. Java is looking at the available space in swap, and if there is not enough memory available, the jvm exits.

To resolve the issue, I had to end several programs that had a large amount of virtual memory allocated.

I was running on x86-64 linux with a 64-bit jvm.

You use it like this:

SELECT  age, name
FROM    users
UNION
SELECT  25 AS age, 'Betty' AS name

Use UNION ALL to allow duplicates: if there is a 25-years old Betty among your users, the second query will not select her again with mere UNION.

you should use this code:

$json = json_encode(array_map('utf8_encode', $arr))

array_map function converts special characters in UTF8 standard

summation and your other functions are defined after they're used in main, and so the compiler has made a guess about it's signature; in other words, an implicit declaration has been assumed.

You should declare the function before it's used and get rid of the warning. In the C99 specification, this is an error.

Either move the function bodies before main, or include method signatures before main, e.g.:

#include <stdio.h>

int summation(int *, int *, int *);

int main()
{
    // ...

Unicode is a standard and about UTF-x you can think as a technical implementation for some practical purposes:

• UTF-8 - "size optimized": best suited for Latin character based data (or ASCII), it takes only 1 byte per character but the size grows accordingly symbol variety (and in worst case could grow up to 6 bytes per character)
• UTF-16 - "balance": it takes minimum 2 bytes per character which is enough for existing set of the mainstream languages with having fixed size on it to ease character handling (but size is still variable and can grow up to 4 bytes per character)
• UTF-32 - "performance": allows using of simple algorithms as result of fixed size characters (4 bytes) but with memory disadvantage

From the javascript I tried from several ways and I could not.

You need an server side solution, for example on c# I did create an controller that call to the http, en deserialize the object, and the result is that when I call from javascript, I'm doing an request from my https://domain to my htpps://domain. Please see my c# code:

[Authorize]
public class CurrencyServicesController : Controller
{
    HttpClient client;
    //GET: CurrencyServices/Consultar?url=valores?moedas=USD&alt=json
    public async Task<dynamic> Consultar(string url)
    {
        client = new HttpClient();
        client.BaseAddress = new Uri("http://api.promasters.net.br/cotacao/v1/");
        client.DefaultRequestHeaders.Accept.Add(new System.Net.Http.Headers.MediaTypeWithQualityHeaderValue("application/json"));
        System.Net.Http.HttpResponseMessage response = client.GetAsync(url).Result;

        var FromURL = response.Content.ReadAsStringAsync().Result;

        return JsonConvert.DeserializeObject(FromURL);
    }

And let me show to you my client side (Javascript)

<script async>
$(document).ready(function (data) {

    var TheUrl = '@Url.Action("Consultar", "CurrencyServices")?url=valores';
    $.getJSON(TheUrl)
        .done(function (data) {
            $('#DolarQuotation').html(
                '$ ' + data.valores.USD.valor.toFixed(2) + ','
            );
            $('#EuroQuotation').html(
                '€ ' + data.valores.EUR.valor.toFixed(2) + ','
            );

            $('#ARGPesoQuotation').html(
                'Ar$ ' + data.valores.ARS.valor.toFixed(2) + ''
            );

        });       

});

I wish that this help you! Greetings

You can set new indices by using set_index:

df2.set_index(np.arange(len(df2.index)))

Output:

   x  y
0  0  0
1  0  1
2  0  2
3  1  0
4  1  1
5  1  2
6  2  0
7  2  1
8  2  2

Here is how you can retrieve only directories with GLOB:

$directories = glob($somePath . '/*' , GLOB_ONLYDIR);

will not work.. use $(window) instead

For Showing

$(window).on('shown.bs.modal', function() { 
    $('#code').modal('show');
    alert('shown');
});

For Hiding

$(window).on('hidden.bs.modal', function() { 
    $('#code').modal('hide');
    alert('hidden');
});

It's the null conditional operator. It basically means:

"Evaluate the first operand; if that's null, stop, with a result of null. Otherwise, evaluate the second operand (as a member access of the first operand)."

In your example, the point is that if a is null, then a?.PropertyOfA will evaluate to null rather than throwing an exception - it will then compare that null reference with foo (using string's == overload), find they're not equal and execution will go into the body of the if statement.

In other words, it's like this:

string bar = (a == null ? null : a.PropertyOfA);
if (bar != foo)
{
    ...
}

... except that a is only evaluated once.

Note that this can change the type of the expression, too. For example, consider FileInfo.Length. That's a property of type long, but if you use it with the null conditional operator, you end up with an expression of type long?:

FileInfo fi = ...; // fi could be null
long? length = fi?.Length; // If fi is null, length will be null

Let's evaluate the parsing of each:

http://jsfiddle.net/brandonscript/Y2dGv/

var json1 = '{}';
var json2 = '{"myCount": null}';
var json3 = '{"myCount": 0}';
var json4 = '{"myString": ""}';
var json5 = '{"myString": "null"}';
var json6 = '{"myArray": []}';

console.log(JSON.parse(json1)); // {}
console.log(JSON.parse(json2)); // {myCount: null}
console.log(JSON.parse(json3)); // {myCount: 0}
console.log(JSON.parse(json4)); // {myString: ""}
console.log(JSON.parse(json5)); // {myString: "null"}
console.log(JSON.parse(json6)); // {myArray: []}

The tl;dr here:

The fragment in the json2 variable is the way the JSON spec indicates null should be represented. But as always, it depends on what you're doing -- sometimes the "right" way to do it doesn't always work for your situation. Use your judgement and make an informed decision.

JSON1 {}

This returns an empty object. There is no data there, and it's only going to tell you that whatever key you're looking for (be it myCount or something else) is of type undefined.

JSON2 {"myCount": null}

In this case, myCount is actually defined, albeit its value is null. This is not the same as both "not undefined and not null", and if you were testing for one condition or the other, this might succeed whereas JSON1 would fail.

This is the definitive way to represent null per the JSON spec.

JSON3 {"myCount": 0}

In this case, myCount is 0. That's not the same as null, and it's not the same as false. If your conditional statement evaluates myCount > 0, then this might be worthwhile to have. Moreover, if you're running calculations based on the value here, 0 could be useful. If you're trying to test for null however, this is actually not going to work at all.

JSON4 {"myString": ""}

In this case, you're getting an empty string. Again, as with JSON2, it's defined, but it's empty. You could test for if (obj.myString == "") but you could not test for null or undefined.

JSON5 {"myString": "null"}

This is probably going to get you in trouble, because you're setting the string value to null; in this case, obj.myString == "null" however it is not == null.

JSON6 {"myArray": []}

This will tell you that your array myArray exists, but it's empty. This is useful if you're trying to perform a count or evaluation on myArray. For instance, say you wanted to evaluate the number of photos a user posted - you could do myArray.length and it would return 0: defined, but no photos posted.

Using a normal css selector:

$('.sys input[type=text], .sys select').each(function() {...})

If you don't like the repetition:

$('.sys').find('input[type=text],select').each(function() {...})

Or more concisely, pass in the context argument:

$('input[type=text],select', '.sys').each(function() {...})

Note: Internally jQuery will convert the above to find() equivalent

http://api.jquery.com/jQuery/

Internally, selector context is implemented with the .find() method, so $('span', this) is equivalent to $(this).find('span').

I personally find the first alternative to be the most readable :), your take though

You are using USCOUNTER in a subshell, that's why the variable is not showing in the main shell.

Instead of cat FILE | while ..., do just a while ... done < $FILE. This way, you avoid the common problem of I set variables in a loop that's in a pipeline. Why do they disappear after the loop terminates? Or, why can't I pipe data to read?:

while read country _; do
  if [ "US" = "$country" ]; then
        USCOUNTER=$(expr $USCOUNTER + 1)
        echo "US counter $USCOUNTER"
  fi
done < "$FILE"

Note I also replaced the `` expression with a $().

I also replaced while read line; do country=$(echo "$line" | cut -d' ' -f1) with while read country _. This allows you to say while read var1 var2 ... varN where var1 contains the first word in the line, $var2 and so on, until $varN containing the remaining content.

Set id in form when you submitting form

     <form action="" id="cform">

       <input type="submit" name="">

    </form>

   set in jquery 

   document.getElementById("cform").reset(); 

I'm a novice, but this is my self taught way of doing it:

ifstream input_file("example.txt", ios::in | ios::binary)

streambuf* buf_ptr =  input_file.rdbuf(); //pointer to the stream buffer

input.get(); //extract one char from the stream, to activate the buffer
input.unget(); //put the character back to undo the get()

size_t file_size = buf_ptr->in_avail();
//a value of 0 will be returned if the stream was not activated, per line 3.

You can use Manifold's @JailBreak for direct, type-safe Java reflection:

@JailBreak Foo foo = new Foo();
foo.stuffIWant = "123;

public class Foo {
    private String stuffIWant;
}

@JailBreak unlocks the foo local variable in the compiler for direct access to all the members in Foo's hierarchy.

Similarly you can use the jailbreak() extension method for one-off use:

foo.jailbreak().stuffIWant = "123";

Through the jailbreak() method you can access any member in Foo's hierarchy.

In both cases the compiler resolves the field access for you type-safely, as if a public field, while Manifold generates efficient reflection code for you under the hood.

Discover more about Manifold.

     double d = 2.34568;
     DecimalFormat f = new DecimalFormat("##.00");
     System.out.println(f.format(d));

Drop the problem database, then reboot mysql service (sudo service mysql restart, for example).

In my case it was a spelling mistake in the database name in connection string.

Live streaming in HTML5 is possible via the use of Media Source Extensions (MSE) - the relatively new W3C standard: https://www.w3.org/TR/media-source/ MSE is an an extension of HTML5 <video> tag; the javascript on webpage can fetch audio/video segments from the server and push them to MSE for playback. The fetching mechanism can be done via HTTP requests (MPEG-DASH) or via WebSockets. As of September 2016 all major browsers on all devices support MSE. iOS is the only exception.

For high latency (5+ seconds) HTML5 live video streaming you can consider MPEG-DASH implementations by video.js or Wowza streaming engine.

For low latency, near real-time HTML5 live video streaming, take a look at EvoStream media server, Unreal media server, and WebRTC.

Since a lot of people find this question because of having trouble with dynamically access attributes of an object, I will just point out that you can do this in PHP: $valueRow->{"valueName"}

In context (removed HTML output for readability):

$valueRows = json_decode("{...}"); // Rows of unordered values decoded from a JSON object

foreach ($valueRows as $valueRow) {

    foreach ($references as $reference) {

        if (isset($valueRow->{$reference->valueName})) {
            $tableHtml .= $valueRow->{$reference->valueName};
        }
        else {
            $tableHtml .= " ";
        }
    }
}

I am not writing anything same here. Just a changelog note from PHP manual.

Changelog for continue

Version Description

7.0.0 - continue outside of a loop or switch control structure is now detected at compile-time instead of run-time as before, and triggers an E_COMPILE_ERROR.

5.4.0   continue 0; is no longer valid. In previous versions it was interpreted the same as continue 1;.

5.4.0   Removed the ability to pass in variables (e.g., $num = 2; continue $num;) as the numerical argument.

Changelog for break

Version Description

7.0.0   break outside of a loop or switch control structure is now detected at compile-time instead of run-time as before, and triggers an E_COMPILE_ERROR.

5.4.0   break 0; is no longer valid. In previous versions it was interpreted the same as break 1;.

5.4.0   Removed the ability to pass in variables (e.g., $num = 2; break $num;) as the numerical argument.

you can also have two classes within an element like this

<div class = "item1 item2 item3"></div>

each item in the class is its own class

.item1 {
  background-color:black;
}

.item2 {
  background-color:green;
}

.item3 {
  background-color:orange;
}

public Boolean test() throws InterruptedException {
    BlockingQueue<Boolean> booleanHolder = new LinkedBlockingQueue<>();
    new Thread(() -> {
        try {
            TimeUnit.SECONDS.sleep(2);
            booleanHolder.put(true);
        } catch (InterruptedException e) {
            e.printStackTrace();
        }
    }).start();
    return booleanHolder.poll(4, TimeUnit.SECONDS);
}

Background

Absolute: The browser will always interpret / as the root of the hostname. For example, if my site was http://google.com/ and I specified /css/images.css then it would search for that at http://google.com/css/images.css. If your project root was actually at /myproject/ it would not find the css file. Therefore, you need to determine where your project folder root is relative to the hostname, and specify that in your href notation.

Relative: If you want to reference something you know is in the same path on the url - that is, if it is in the same folder, for example http://mysite.com/myUrlPath/index.html and http://mysite.com/myUrlPath/css/style.css, and you know that it will always be this way, you can go against convention and specify a relative path by not putting a leading / in front of your path, for example, css/style.css.

Filesystem Notations: Additionally, you can use standard filesystem notations like ... If you do http://google.com/images/../images/../images/myImage.png it would be the same as http://google.com/images/myImage.png. If you want to reference something that is one directory up from your file, use ../myFile.css.

Your Specific Case

In your case, you have two options:

• <link rel="stylesheet" type="text/css" href="/ServletApp/css/styles.css"/>
• <link rel="stylesheet" type="text/css" href="css/styles.css"/>

The first will be more concrete and compatible if you move things around, however if you are planning to keep the file in the same location, and you are planning to remove the /ServletApp/ part of the URL, then the second solution is better.

I've played around with it and I think I have a solution. The following example shows how to set Box-Shadow so that it will only show a shadow for the inset top and bottom of an element.

Legend: insetOption leftPosition topPosition blurStrength spreadStrength color

Description
The key to accomplishing this is to set the blur value to <= the negative of the spread value (ex. inset 0px 5px -?px 5px #000; the blur value should be -5 and lower) and to also keep the blur value > 0 when subtracted from the primary positioning value (ex. using the example from above, the blur value should be -9 and up, thus giving us an optimal value for the the blur to be between -5 and -9).

Solution

.styleName {   
/* for IE 8 and lower */
background-color:#888; filter: progid:DXImageTransform.Microsoft.dropShadow(color=#FFFFCC, offX=0, offY=0, positive=true);  

/* for IE 9 */ 
box-shadow: inset 0px 2px -2px 2px rgba(255,255,204,0.7), inset 0px -2px -2px 2px rgba(255,255,204,0.7); 

/* for webkit browsers */ 
-webkit-box-shadow: inset 0px 2px -2px 2px rgba(255,255,204,0.7), inset 0px -2px -2px 2px rgba(255,255,204,0.7); 

/* for firefox 3.6+ */
-moz-box-shadow: inset 0px 2px -2px 2px rgba(255,255,204,0.7), inset 0px -2px -2px 2px rgba(255,255,204,0.7);   
}

Here it is, wrapped up in a nice and reusable method:

public static int count(String text, String find) {
        int index = 0, count = 0, length = find.length();
        while( (index = text.indexOf(find, index)) != -1 ) {                
                index += length; count++;
        }
        return count;
}

As of SQL Server 2012 you can use the eomonth built-in function, which is intended for getting the end of the month but can also be used to get the start as so:

select dateadd(day, 1, eomonth(<date>, -1))

If you need the result as a datetime etc., just cast it:

select cast(dateadd(day, 1, eomonth(<date>, -1)) as datetime)

Answer given by @mpm is not working it gives the error

Duplicates in a repeater are not allowed. Use 'track by' expression to specify unique keys. Repeater: {0}, Duplicate key: {1}

To avoid this along with

ng-repeat="t in getTimes(4)"

use

track by $index

like this

<div ng-repeat="t in getTimes(4) track by $index">TEXT</div>

I use this command for scripts which extracts data for dimensional tables (DW). So, I use the following syntax:

set colsep '|'
set echo off
set feedback off
set linesize 1000
set pagesize 0
set sqlprompt ''
set trimspool on
set headsep off

spool output.dat

select '|', <table>.*, '|'
  from <table>
where <conditions>

spool off

And works. I don't use sed for format the output file.

In addition to previously provided answers, one option is to follow the 'localhost exception' approach to create the first user if your db is already started with access control (--auth switch). In order to do that, you need to have localhost access to the server and then run:

mongo
use admin
db.createUser(
 {
     user: "user_name",
     pwd: "user_pass",
     roles: [
           { role: "userAdminAnyDatabase", db: "admin" },
           { role: "readWriteAnyDatabase", db: "admin" },
           { role: "dbAdminAnyDatabase", db: "admin" }
        ]
 })

As stated in MongoDB documentation:

The localhost exception allows you to enable access control and then create the first user in the system. With the localhost exception, after you enable access control, connect to the localhost interface and create the first user in the admin database. The first user must have privileges to create other users, such as a user with the userAdmin or userAdminAnyDatabase role. Connections using the localhost exception only have access to create the first user on the admin database.

Here is the link to that section of the docs.

Edit/Create an .htaccess file inside /galerias with this:

Options -Indexes

Directory browsing is provided by the mod_autoindex module.

Unfortunately, re.escape() is not suited for the replacement string:

>>> re.sub('a', re.escape('_'), 'aa')
'\\_\\_'

A solution is to put the replacement in a lambda:

>>> re.sub('a', lambda _: '_', 'aa')
'__'

because the return value of the lambda is treated by re.sub() as a literal string.

These are identical for printf but different for scanf. For printf, both %d and %i designate a signed decimal integer. For scanf, %d and %i also means a signed integer but %i inteprets the input as a hexadecimal number if preceded by 0x and octal if preceded by 0 and otherwise interprets the input as decimal.

You can also add an extension method to the Enum type rather than an instance of the Enum:

/// <summary> Enum Extension Methods </summary>
/// <typeparam name="T"> type of Enum </typeparam>
public class Enum<T> where T : struct, IConvertible
{
    public static int Count
    {
        get
        {
            if (!typeof(T).IsEnum)
                throw new ArgumentException("T must be an enumerated type");

            return Enum.GetNames(typeof(T)).Length;
        }
    }
}

You can invoke the extension method above by doing:

var result = Enum<Duration>.Count;

It's not a true extension method. It only works because Enum<> is a different type than System.Enum.

It's actually easier than everyone's making it sound... especially if you use the $.ajax({}) base syntax vs. one of the helper functions.

Just pass in the key: value pair like you would on any object, when you setup your ajax request... (because $(this) hasn't changed context yet, it's still the trigger for the bind call above)

<script type="text/javascript">
$(".qty input").bind("keypress change", function() {
    $.ajax({
        url: "/order_items/change/"+$(this).attr("data-order-item-id")+"/qty:"+$(this).val()+"/returnas.json",
        type: "POST",
        dataType: "json",
        qty_input: $(this),
        anything_else_i_want_to_pass_in: "foo",
        success: function(json_data, textStatus, jqXHR) {
            /* here is the input, which triggered this AJAX request */
            console.log(this.qty_input);
            /* here is any other parameter you set when initializing the ajax method */
            console.log(this.anything_else_i_want_to_pass_in);
        }
    });
});
</script>

One of the reasons this is better than setting the var, is that the var is global and as such, overwritable... if you have 2 things which can trigger ajax calls, you could in theory trigger them faster than ajax call responds, and you'd have the value for the second call passed into the first. Using this method, above, that wouldn't happen (and it's pretty simple to use too).

Thomas,

You would want to provide your users with a market:// link which will bring them directly to the details page of your app. The following is from developer.android.com:

Loading an application's Details page

In Android Market, every application has a Details page that provides an overview of the application for users. For example, the page includes a short description of the app and screen shots of it in use, if supplied by the developer, as well as feedback from users and information about the developer. The Details page also includes an "Install" button that lets the user trigger the download/purchase of the application.

If you want to refer the user to a specific application, your application can take the user directly to the application's Details page. To do so, your application sends an ACTION_VIEW Intent that includes a URI and query parameter in this format:

market://details?id=

In this case, the packagename parameter is target application's fully qualified package name, as declared in the package attribute of the manifest element in the application's manifest file. For example:

market://details?id=com.example.android.jetboy

Source: http://developer.android.com/guide/publishing/publishing.html

Add the following dependency to your pom.xml

<dependency>
    <groupId>com.fasterxml.jackson.core</groupId>
    <artifactId>jackson-core</artifactId>
    <version>2.5.2</version>
</dependency>

As @TechSpellBound suggested remove the quotes around the ? signs. Then add a space character at the end of each row in your concatenated string. Otherwise the entire query will be sent as (using only part of it as an example) : .... WHERE bookings.booking_end < date ?OR bookings.booking_start > date ?GROUP BY ....

The ? and the OR needs to be seperated by a space character. Do it wherever needed in the query string.

Alternative:

library(stringr)
a = c("capitalise this", "and this")
a
[1] "capitalise this" "and this"       
str_to_title(a)
[1] "Capitalise This" "And This"   

The HttpWebRequest modifies the CookieContainer assigned to it. There is no need to process returned cookies. Simply assign your cookie container to every web request.

public class CookieAwareWebClient : WebClient
{
    public CookieContainer CookieContainer { get; set; } = new CookieContainer();

    protected override WebRequest GetWebRequest(Uri uri)
    {
        WebRequest request = base.GetWebRequest(uri);
        if (request is HttpWebRequest)
        {
            (request as HttpWebRequest).CookieContainer = CookieContainer;
        }
        return request;
    }
}

Code for set background color, for SolidColor:

button.Background = new SolidColorBrush(Color.FromArgb(Avalue, rValue, gValue, bValue));

In C, the order that you define things often matters. Either move the definition of outchar to the top, or provide a prototype at the top, like this:

#include <stdio.h> #include <stdlib.h>  void outchar(char ch);  int main() {     outchar('A');     outchar('B');     outchar('C');     return 0; }  void outchar(char ch) {     printf("%c", ch); } 

Also, you should be specifying the return type of every function. I added that for you.

I made my own version, based in the code presented above by @Tats_innit . The difference is the pause function. Works a little better in that aspect.

(function ($) {
var timeVar, width=0;

$.fn.textWidth = function () {
    var calc = '<span style="display:none">' + $(this).text() + '</span>';
    $('body').append(calc);
    var width = $('body').find('span:last').width();
    $('body').find('span:last').remove();
    return width;
};

$.fn.marquee = function (args) {
    var that = $(this);
    if (width == 0) { width = that.width(); };
    var textWidth = that.textWidth(), offset = that.width(), i = 0, stop = textWidth * -1, dfd = $.Deferred(),
        css = {
            'text-indent': that.css('text-indent'),
            'overflow': that.css('overflow'),
            'white-space': that.css('white-space')
        },
        marqueeCss = {
            'text-indent': width,
            'overflow': 'hidden',
            'white-space': 'nowrap'
        },
        args = $.extend(true, { count: -1, speed: 1e1, leftToRight: false, pause: false }, args);

    function go() {
        if (!that.length) return dfd.reject();
        if (width <= stop) {
            i++;
            if (i <= args.count) {
                that.css(css);
                return dfd.resolve();
            }
            if (args.leftToRight) {
                width = textWidth * -1;
            } else {
                width = offset;
            }
        }
        that.css('text-indent', width + 'px');
        if (args.leftToRight) {
            width++;
        } else {
            width=width-2;
        }
        if (args.pause == false) { timeVar = setTimeout(function () { go() }, args.speed); };
        if (args.pause == true) { clearTimeout(timeVar); };
    };

    if (args.leftToRight) {
        width = textWidth * -1;
        width++;
        stop = offset;
    } else {
        width--;
    }
    that.css(marqueeCss);

    timeVar = setTimeout(function () { go() }, 100);

    return dfd.promise();
};
})(jQuery);

usage:

for start: $('#Text1').marquee()

pause: $('#Text1').marquee({ pause: true })

resume: $('#Text1').marquee({ pause: false })

Follow the steps via terminal:

1. sudo add-apt-repository ppa:webupd8team/java
2. sudo apt-get update
3. sudo apt-get install oracle-java8-installer

after then:

4. sudo apt-get install oracle-java8-set-default

then;

5. Download Android Studio from "https://developer.android.com/studio/index.html", use All Android Studio Packages.
6. Unzip the file.

At last type via terminal :

1. cd android-studio
2. cd bin
3. ./studio.sh

Then follow the commands and you're ready to go.

I'm not an expert on this, but I can try and contribute a few answers:

1. NetHack and it's brethern are open source and rely heavily on procedural generation of levels (maps). Link to the downloads of it. If you are more interested in landscape/texture/cloud generation, I'd recommend you search Gamasutra and GameDev which have quite a few articles on those subjects.

2. AFAIK I don't think there is much difference between languages. Most of the code you see will be in C/CPP because it's still very much the official language of Game Developers, but you can use anything you want...

3. Well it depends if you have a project that can benefit from such technology. I saw procedural generation used in simulators for the army (which can be considered a game, although they are not very playable :)).

And a small note - my definition if procedural generation is anything generating a lot of data from a small amount of rules or patterns and lots of randomness, your results may vary :)

I am proposing my idea about it against any disadvantages array_values( ) function, because I think that is not a direct get function. In this way it have to create a copy of the values numerically indexed array and then access. If PHP does not hide a method that automatically translates an integer in the position of the desired element, maybe a slightly better solution might consist of a function that runs the array with a counter until it leads to the desired position, then return the element reached.

So the work would be optimized for very large array of sizes, since the algorithm would be best performing indices for small, stopping immediately. In the solution highlighted of array_values( ), however, it has to do with a cycle flowing through the whole array, even if, for e.g., I have to access $ array [1].

function array_get_by_index($index, $array) {

    $i=0;
    foreach ($array as $value) {
        if($i==$index) {
            return $value;
        }
        $i++;
    }
    // may be $index exceedes size of $array. In this case NULL is returned.
    return NULL;
}

In command line prompt:

set __COMPAT_LAYER=RUNASINVOKER
SystemPropertiesAdvanced.exe

Now you can set user environment variables.

No ternary operator allowed where I currently work:

int value = (a < b) ? a : b;

... because not everyone "gets it". If you told me, "Don't use it because we've had to rewrite them when the structures get too complicated" (nested ternary operators, anyone?), then I'd understand. But when you tell me that some developers don't understand them... um... Sure.

Might be a hanging gpg-agent.

Try gpgconf --kill gpg-agent as discussed here

Right(A1, Len(A1)-Find("(asterisk)",Substitute(A1, "(space)","(asterisk)",Len(A1)-Len(Substitute(A1,"(space)", "(no space)")))))

Try this. Hope it works.

Both will get called, first come first served. Take a look here.

$(document).ready(function(){
    $("#page-title").html("Document-ready was called!");
  });

$(document).ready(function(){
    $("#page-title").html("Document-ready 2 was called!");
  });

Output:

Document-ready 2 was called!

Custom Error Decorator

This is based on George Bailey's answer, but extends and simplifies the original idea. It is written in CoffeeScript, but is easy to convert to JavaScript. The idea is extend Bailey's custom error with a decorator that wraps it, allowing you to create new custom errors easily.

Note: This will only work in V8. There is no support for Error.captureStackTrace in other environments.

Define

The decorator takes a name for the error type, and returns a function that takes an error message, and encloses the error name.

CoreError = (@message) ->

    @constructor.prototype.__proto__ = Error.prototype
    Error.captureStackTrace @, @constructor
    @name = @constructor.name

BaseError = (type) ->

    (message) -> new CoreError "#{ type }Error: #{ message }"

Use

Now it is simple to create new error types.

StorageError   = BaseError "Storage"
SignatureError = BaseError "Signature"

For fun, you could now define a function that throws a SignatureError if it is called with too many args.

f = -> throw SignatureError "too many args" if arguments.length

This has been tested pretty well and seems to work perfectly on V8, maintaing the traceback, position etc.

Note: Using new is optional when constructing a custom error.

I don't know if I understand your problem correctly, so let me restate it in my own words...

Problem: Given classes B and D, determine if D is a subclass of B (or vice-versa?)

Solution: Use some template magic! Okay, seriously you need to take a look at LOKI, an excellent template meta-programming library produced by the fabled C++ author Andrei Alexandrescu.

More specifically, download LOKI and include header TypeManip.h from it in your source code then use the SuperSubclass class template as follows:

if(SuperSubClass<B,D>::value)
{
...
}

According to documentation, SuperSubClass<B,D>::value will be true if B is a public base of D, or if B and D are aliases of the same type.

i.e. either D is a subclass of B or D is the same as B.

I hope this helps.

edit:

Please note the evaluation of SuperSubClass<B,D>::value happens at compile time unlike some methods which use dynamic_cast, hence there is no penalty for using this system at runtime.

This won't help you step through code or break on errors, but it's a useful way to get the same debug console for your project on all browsers.

myLog = function() {
    if (!myLog._div) { myLog.createDiv(); }

    var logEntry = document.createElement('span');
    for (var i=0; i < arguments.length; i++) {
        logEntry.innerHTML += myLog.toJson(arguments[i]) + '<br />';
    }
    logEntry.innerHTML += '<br />';

    myLog._div.appendChild(logEntry);
}
myLog.createDiv = function() {
    myLog._div = document.body.appendChild(document.createElement('div'));
    var props = {
        position:'absolute', top:'10px', right:'10px', background:'#333', border:'5px solid #333', 
        color: 'white', width: '400px', height: '300px', overflow: 'auto', fontFamily: 'courier new',
        fontSize: '11px', whiteSpace: 'nowrap'
    }
    for (var key in props) { myLog._div.style[key] = props[key]; }
}
myLog.toJSON = function(obj) {
    if (typeof window.uneval == 'function') { return uneval(obj); }
    if (typeof obj == 'object') {
        if (!obj) { return 'null'; }
        var list = [];
        if (obj instanceof Array) {
            for (var i=0;i < obj.length;i++) { list.push(this.toJson(obj[i])); }
            return '[' + list.join(',') + ']';
        } else {
            for (var prop in obj) { list.push('"' + prop + '":' + this.toJson(obj[prop])); }
            return '{' + list.join(',') + '}';
        }
    } else if (typeof obj == 'string') {
        return '"' + obj.replace(/(["'])/g, '\\$1') + '"';
    } else {
        return new String(obj);
    }
}

myLog('log statement');
myLog('logging an object', { name: 'Marcus', likes: 'js' });

This is put together pretty hastily and is a bit sloppy, but it's useful nonetheless and can be improved easily!

You basically need to run the installation again to rebuild the master database with the new collation. You cannot change the entire server's collation any other way.

See:

• MSDN: Setting and changing the server collation
• How to change database or server collation (in the middle of the page)

Update: if you want to change the collation of a database, you can get the current collation using this snippet of T-SQL:

SELECT name, collation_name 
FROM sys.databases
WHERE name = 'test2'   -- put your database name here

This will yield a value something like:

Latin1_General_CI_AS

The _CI means "case insensitive" - if you want case-sensitive, use _CS in its place:

Latin1_General_CS_AS

So your T-SQL command would be:

ALTER DATABASE test2 -- put your database name here
   COLLATE Latin1_General_CS_AS   -- replace with whatever collation you need

You can get a list of all available collations on the server using:

SELECT * FROM ::fn_helpcollations()

You can see the server's current collation using:

SELECT SERVERPROPERTY ('Collation')

I've successfully mount /home/<user-name> folder of my host to the /mnt folder of the existing (not running) container. You can do it in the following way:

1. Open configuration file corresponding to the stopped container, which can be found at /var/lib/docker/containers/99d...1fb/config.v2.json (may be config.json for older versions of docker).

2. Find MountPoints section, which was empty in my case: "MountPoints":{}. Next replace the contents with something like this (you can copy proper contents from another container with proper settings):

"MountPoints":{"/mnt":{"Source":"/home/<user-name>","Destination":"/mnt","RW":true,"Name":"","Driver":"","Type":"bind","Propagation":"rprivate","Spec":{"Type":"bind","Source":"/home/<user-name>","Target":"/mnt"},"SkipMountpointCreation":false}}

or the same (formatted):

  "MountPoints": {
    "/mnt": {
      "Source": "/home/<user-name>",
      "Destination": "/mnt",
      "RW": true,
      "Name": "",
      "Driver": "",
      "Type": "bind",
      "Propagation": "rprivate",
      "Spec": {
        "Type": "bind",
        "Source": "/home/<user-name>",
        "Target": "/mnt"
      },
      "SkipMountpointCreation": false
    }
  }

3. Restart the docker service: service docker restart

This works for me with Ubuntu 18.04.1 and Docker 18.09.0

In my case,

I realized that remote debugging runs and consumes most of the resources. I did not really need to make the app 64 bit so after forcing it to be 32 Bit, remote debugging did not run and the execution was faster.

If you are on both sides of the communication you can use repr() and eval() functions along with json.

import datetime, json

dt = datetime.datetime.now()
print("This is now: {}".format(dt))

dt1 = json.dumps(repr(dt))
print("This is serialised: {}".format(dt1))

dt2 = json.loads(dt1)
print("This is loaded back from json: {}".format(dt2))

dt3 = eval(dt2)
print("This is the same object as we started: {}".format(dt3))

print("Check if they are equal: {}".format(dt == dt3))

You shouldn't import datetime as

from datetime import datetime

since eval will complain. Or you can pass datetime as a parameter to eval. In any case this should work.

The new line character is \n, like so:

echo __("Thanks for your email.\n<br />\n<br />Your order's details are below:", 'jigoshop');

I had an strange problem and understood an unpleasant strange difference: when I get an URL from user as an CharField and then and use it in html a tag by href, it adds that url to my url and that's not what I want. But when I do it by Textfield it passes just the URL that user entered. look at these: my website address: http://myweb.com

CharField entery: http://some-address.com

when clicking on it: http://myweb.comhttp://some-address.com

TextField entery: http://some-address.com

when clicking on it: http://some-address.com

I must mention that the URL is saved exactly the same in DB by two ways but I don't know why result is different when clicking on them

This trick could be what you are looking for. It is a kind of simple operator overload.

You can then use something like the suggested Infix class like this:

a = np.random.rand(3,4)
b = np.random.rand(4,3)
x = Infix(lambda x,y: np.dot(x,y))
c = a |x| b

Just to be clear, TRIM by default only remove spaces (not all whitespaces). Here is the doc: http://dev.mysql.com/doc/refman/5.0/en/string-functions.html#function_trim

It looks to me as though the basic problem is that you have one wait() call rather than a loop that waits until there are no more children. You also only wait if the last fork() is successful rather than if at least one fork() is successful.

You should only use _exit() if you don't want normal cleanup operations - such as flushing open file streams including stdout. There are occasions to use _exit(); this is not one of them. (In this example, you could also, of course, simply have the children return instead of calling exit() directly because returning from main() is equivalent to exiting with the returned status. However, most often you would be doing the forking and so on in a function other than main(), and then exit() is often appropriate.)

Hacked, simplified version of your code that gives the diagnostics I'd want. Note that your for loop skipped the first element of the array (mine doesn't).

#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <sys/wait.h>

int main(void)
{
    pid_t child_pid, wpid;
    int status = 0;
    int i;
    int a[3] = {1, 2, 1};

    printf("parent_pid = %d\n", getpid());
    for (i = 0; i < 3; i++)
    {
        printf("i = %d\n", i);
        if ((child_pid = fork()) == 0)
        {
            printf("In child process (pid = %d)\n", getpid());
            if (a[i] < 2)
            {
                printf("Should be accept\n");
                exit(1);
            }
            else
            {
                printf("Should be reject\n");
                exit(0);
            }
            /*NOTREACHED*/
        }
    }

    while ((wpid = wait(&status)) > 0)
    {
        printf("Exit status of %d was %d (%s)\n", (int)wpid, status,
               (status > 0) ? "accept" : "reject");
    }
    return 0;
}

Example output (MacOS X 10.6.3):

parent_pid = 15820
i = 0
i = 1
In child process (pid = 15821)
Should be accept
i = 2
In child process (pid = 15822)
Should be reject
In child process (pid = 15823)
Should be accept
Exit status of 15823 was 256 (accept)
Exit status of 15822 was 0 (reject)
Exit status of 15821 was 256 (accept)

Hers's what I used to get the day names (0-6 means monday - sunday):

public static String getFullDayName(int day) {
    Calendar c = Calendar.getInstance();
    // date doesn't matter - it has to be a Monday
    // I new that first August 2011 is one ;-)
    c.set(2011, 7, 1, 0, 0, 0);
    c.add(Calendar.DAY_OF_MONTH, day);
    return String.format("%tA", c);
}

public static String getShortDayName(int day) {
    Calendar c = Calendar.getInstance();
    c.set(2011, 7, 1, 0, 0, 0);
    c.add(Calendar.DAY_OF_MONTH, day);
    return String.format("%ta", c);
}

On Mac OS X, the Xcode developer suite includes the USB Proper.app application. This is found in /Developer/Applications/Utilities/. USB Prober will allow you to examine the device and interface descriptors.

Just use;

$('#selectedDueDate').val(dateText).trigger('input');

You must put the updatepanel id in the first argument if the control causing the script is inside the updatepanel else use the keyword 'this' instead of update panel here is the code

ScriptManager.RegisterStartupScript(UpdatePanel3, this.GetType(), UpdatePanel3.UniqueID, "showError();", true);

Just to clarify my comment (it's illegible in a single line)

I think the best answer is the comment by Mike Chambers in this link (http://www.judahfrangipane.com/blog/2007/02/15/error-2032-stream-error/) by Hunter McMillen.

A note from Mike Chambers:

If you run into this using URLLoader, listen for the:

flash.events.HTTPStatusEvent.HTTP_STATUS

and in AIR :

flash.events.HTTPStatusEvent.HTTP_RESPONSE_STATUS

It should give you some more information (such as the status code being returned from the server).

In addition to adding the user to the docker group and trying everything mentioned in this thread, it took me a while to realize that I had to restart my terminal and then log back into the ec2 instance. It worked after that.

It is not necessary to use withRouter. This works for me:

In your parent page,

<BrowserRouter>
   <Switch>
        <Route path="/routeA" render={(props)=> (
          <ComponentA {...props} propDummy={50} />
        )} />

        <Route path="/routeB" render={(props)=> (
          <ComponentB {...props} propWhatever={100} />
          )} /> 
      </Switch>
</BrowserRouter>

Then in ComponentA or ComponentB you can access

this.props.history

object, including the this.props.history.push method.

There are several helpful bits of code for this.

Place your cursor in a merged cell and ask these questions in the Immidiate Window:

Is the activecell a merged cell?

? Activecell.Mergecells
 True

How many cells are merged?

? Activecell.MergeArea.Cells.Count
 2

How many columns are merged?

? Activecell.MergeArea.Columns.Count
 2

How many rows are merged?

? Activecell.MergeArea.Rows.Count
  1

What's the merged range address?

? activecell.MergeArea.Address
  $F$2:$F$3

This question helped me identify the problem of why phpMyAdmin refused me grid-edit-etc. on some tables. I just had forgotten to declare my primary key and was overseeing it in my "Why the hell should this table be different from its neighbours" solution search process...

I just wanted to react on following in OP self-answer:

The other table had multiple AI int values that were the Primary field, but there were multiple values of the same kind.

The simple fix for this was to just add a column to the end of the table as Unique AI Int. Basically all MySQL is saying is it needs a unique value in each record to differentiate the rows.

This was actually my case, but there's absolutely no need to add any column: if your primary key is the combination of 2 fields (ex. junction table in many to many relationship), then simply declare it as such:
- eiter in phpyAdmin, just enter "2" in "Create an index on [x] columns", then select your 2 columns
- or ALTER TABLE mytable ADD PRIMARY KEY(mycol1,mycol2)

Here is my best shot at it. I added another Div and made it red and changed you parent's height to 200px just to test it. The idea is the the child now becomes the grandchild and the parent becomes the grandparent. So the parent respects its parent. Hope you get my idea.

<html>
  <body>
    <div style="background-color: blue; padding: 10px; position: relative; height: 200px;">
     <div style="background-color: red;  position: relative; height: 100%;">    
        <div style="background-color: gray; position: absolute; left: 0px; right: 0px;bottom: 0px;">css sux</div>
     </div>
    </div>
  </body>
</html>

Edit:

I think what you are trying to do can't be done. Absolute position means that you are going to give it co-ordinates it must honor. What if the parent has a padding of 5px. And you absolutely position the child at top: -5px; left: -5px. How is it suppose to honor the parent and you at the same time??

My solution

If you want it to honor the parent, don't absolutely position it then.

Alias Approach using scala (this is example given for older version of spark for spark 2.x see my other answer) :

You can use case class to prepare sample dataset ... which is optional for ex: you can get DataFrame from hiveContext.sql as well..

import org.apache.spark.sql.functions.col

case class Person(name: String, age: Int, personid : Int)

case class Profile(name: String, personid  : Int , profileDescription: String)

    val df1 = sqlContext.createDataFrame(
   Person("Bindu",20,  2) 
:: Person("Raphel",25, 5) 
:: Person("Ram",40, 9):: Nil)


val df2 = sqlContext.createDataFrame(
Profile("Spark",2,  "SparkSQLMaster") 
:: Profile("Spark",5, "SparkGuru") 
:: Profile("Spark",9, "DevHunter"):: Nil
)

// you can do alias to refer column name with aliases to  increase readablity

val df_asPerson = df1.as("dfperson")
val df_asProfile = df2.as("dfprofile")


val joined_df = df_asPerson.join(
    df_asProfile
, col("dfperson.personid") === col("dfprofile.personid")
, "inner")


joined_df.select(
  col("dfperson.name")
, col("dfperson.age")
, col("dfprofile.name")
, col("dfprofile.profileDescription"))
.show

sample Temp table approach which I don't like personally...

The reason to use the registerTempTable( tableName ) method for a DataFrame, is so that in addition to being able to use the Spark-provided methods of a DataFrame, you can also issue SQL queries via the sqlContext.sql( sqlQuery ) method, that use that DataFrame as an SQL table. The tableName parameter specifies the table name to use for that DataFrame in the SQL queries.

df_asPerson.registerTempTable("dfperson");
df_asProfile.registerTempTable("dfprofile")

sqlContext.sql("""SELECT dfperson.name, dfperson.age, dfprofile.profileDescription
                  FROM  dfperson JOIN  dfprofile
                  ON dfperson.personid == dfprofile.personid""")

If you want to know more about joins pls see this nice post : beyond-traditional-join-with-apache-spark

Note : 1) As mentioned by @RaphaelRoth ,

val resultDf = PersonDf.join(ProfileDf,Seq("personId")) is good approach since it doesnt have duplicate columns from both sides if you are using inner join with same table.
2) Spark 2.x example updated in another answer with full set of join operations supported by spark 2.x with examples + result

TIP :

Also, important thing in joins : broadcast function can help to give hint please see my answer

You probably don't even need string substitution for that. If your original string is JSON, try:

js> a="['abc','xyz']"
['abc','xyz']
js> eval(a).join(",")
abc,xyz

Be careful with eval, of course.

If you are using CocoaPods and at some point botched an update or install (manually killed it or something), try

1) Removing the index.lock file (in .git/index.lock)

2) Remove your Podfile.lock file.

3) Do a new pod update

4) Try issuing the git command that was failing (in my case it was a git add .)

I couldn't get it to trigger that on any page. A more robust version of this would do it:

window.console.log = function(){
    console.error('The developer console is temp...');
    window.console.log = function() {
        return false;
    }
}

console.log('test');

To style the output: Colors in JavaScript console

Edit Thinking @joeldixon66 has the right idea: Disable JavaScript execution from console « ::: KSpace :::

This might be redundant but the above most voted answer says .then(function (success) and that didn't work for me as of Angular version 1.5.8. Instead use response then inside the block response.data got me my json data I was looking for.

$http({
    method: 'get', 
    url: 'data/data.json'
}).then(function (response) {
    console.log(response, 'res');
    data = response.data;
},function (error){
    console.log(error, 'can not get data.');
});

In general, when you need a character that is "special" in regexes, just prefix it with a \. So a literal [ would be \[.

Based on answers from the community, there appear to be several ways that might solve this:

1. From the official FAQ and support forums and this answer, you may have have a firewall or proxy issue that is blocking RStudio from connecting to the internet:

• Disable any firewalls
• Tools -> Global Options -> Packages and unchecking the "Use Internet Explorer library/proxy for HTTP" option and restart R (#1, #2, #3)
• Flag R with --internet2
• On CentOS it was suggested to try the following: install.packages('package_name', dependencies=TRUE, repos='http://cran.rstudio.com/')

2. Several answers suggest using an alternate mirror (#1, #2, #3):

• Preferences > General > Default working directory > Browse and switch your mirror from local/global (whichever is unchecked)

3. On Windows you can start the application with http_proxy=http://host:port/:

• "C:\Program Files\RStudio\bin\rstudio.exe" http_proxy=http://host:port/

5. Shut down and restart. Needed after many of the above operations, and suggested standalone.

For a quick non-JQuery function...

function jsonToQueryString(json) {
    return '?' + 
        Object.keys(json).map(function(key) {
            return encodeURIComponent(key) + '=' +
                encodeURIComponent(json[key]);
        }).join('&');
}

Note this doesn't handle arrays or nested objects.

Using persistent homology to analyze your data set I get the following result (click to enlarge):

This is the 2D-version of the peak detection method described in this SO answer. The above figure simply shows 0-dimensional persistent homology classes sorted by persistence.

I did upscale the original dataset by a factor of 2 using scipy.misc.imresize(). However, note that I did consider the four paws as one dataset; splitting it into four would make the problem easier.

Methodology. The idea behind this quite simple: Consider the function graph of the function that assigns each pixel its level. It looks like this:

Now consider a water level at height 255 that continuously descents to lower levels. At local maxima islands pop up (birth). At saddle points two islands merge; we consider the lower island to be merged to the higher island (death). The so-called persistence diagram (of the 0-th dimensional homology classes, our islands) depicts death- over birth-values of all islands:

The persistence of an island is then the difference between the birth- and death-level; the vertical distance of a dot to the grey main diagonal. The figure labels the islands by decreasing persistence.

The very first picture shows the locations of births of the islands. This method not only gives the local maxima but also quantifies their "significance" by the above mentioned persistence. One would then filter out all islands with a too low persistence. However, in your example every island (i.e., every local maximum) is a peak you look for.

Python code can be found here.

Bojan Milic answer work in a way but it error out with a message below,

This can be avoid with,

function message() 
{
alert("Successful message");
window.location = 'url_Of_Redirected_Page' // i.e. window.location='default.aspx'
}

It is not possible with the default Link List web part, but there are resources describing how to extend Sharepoint server-side to add this functionality.

Share Point Links Open in New Window
Changing Link Lists in Sharepoint 2007

Because in the first one , you're trying to convert a collection to an ArrayList. In the 2nd one , you just use the built in constructor of ArrayList

Here's a solution that may work better in the case you are referencing objWorksheet.UsedRange.

Excel.Worksheet mySheet = ...(load a workbook, etc);
Excel.Range myRange = mySheet.UsedRange;
var values = (myRange.Value as Object[,]);
int rowNumber = 3, columnNumber = 5;
string cellValue = Convert.ToString(values[rowNumber, columnNumber]);

function toCamelCase(str) {
  // Lower cases the string
  return str.toLowerCase()
    // Replaces any - or _ characters with a space 
    .replace( /[-_]+/g, ' ')
    // Removes any non alphanumeric characters 
    .replace( /[^\w\s]/g, '')
    // Uppercases the first character in each group immediately following a space 
    // (delimited by spaces) 
    .replace( / (.)/g, function($1) { return $1.toUpperCase(); })
    // Removes spaces 
    .replace( / /g, '' );
}

I was trying to find a JavaScript function to camelCase a string, and wanted to make sure special characters would be removed (and I had trouble understanding what some of the answers above were doing). This is based on c c young's answer, with added comments and the removal of $peci&l characters.

<table id="table1"></table>
<table id="table2"></table>

or

<table class="table1"></table>
<table class="table2"></table>

This is a perfect example of where you should use the macro recorder. Turn on the recorder and set the color of the cells through the UI. Stop the recorder and review the macro. It will generate a bunch of extraneous code, but it will also show you syntax that works for what you are trying to accomplish. Strip out what you don't need and modify (if you need to) what's left.

PHP has a function called money_format for doing this. Read about this here.

I had the same problem in the iphone or desktop, didnt manage to close the dialog when pressing the close button.

i found out that The <button> tag defines a clickable button and is needed to specify the type attribute for a element as follow:

<button type="button" class="btn btn-default" data-dismiss="modal">Close</button>

check the example code for bootstrap modals at : BootStrap javascript Page

For me it worked like that in Kotlin:

my string.xml

 <string name="price" formatted="false">Price:U$ %.2f%n</string>

my class.kt

 var formatPrice: CharSequence? = null
 var unitPrice = 9990
 formatPrice = String.format(context.getString(R.string.price), unitPrice/100.0)
 Log.d("Double_CharSequence", "$formatPrice")

D/Double_CharSequence: Price :U$ 99,90

For an even better result, we can do so

 <string name="price_to_string">Price:U$ %1$s</string>

 var formatPrice: CharSequence? = null
 var unitPrice = 199990
 val numberFormat = (unitPrice/100.0).toString()
 formatPrice = String.format(context.getString(R.string.price_to_string), formatValue(numberFormat))

  fun formatValue(value: String) :String{
    val mDecimalFormat = DecimalFormat("###,###,##0.00")
    val s1 = value.toDouble()
    return mDecimalFormat.format(s1)
 }

 Log.d("Double_CharSequence", "$formatPrice")

D/Double_CharSequence: Price :U$ 1.999,90

I know u may got the answer but this is for those who are still going down the thread for getting the solution.

U can try all the above solutions but just remember that delete the Previous app from the device or simulator before checking another solution.

I tried all solutions but getting no response as i was not deleting the previous app, only cleaning the build does not satisfy the condition.Hope it helps someone. :)

If you can change the signature of your function to async Task then you can use the code presented here

First style is better. Though you should use better variable name

A polyfill is a shim which replaces the original call with the call to a shim.

For example, say you want to use the navigator.mediaDevices object, but not all browsers support this. You could imagine a library that provided a shim which you might use like this:

<script src="js/MediaShim.js"></script>
<script>
    MediaShim.mediaDevices.getUserMedia(...);
</script>

In this case, you are explicitly calling a shim instead of using the original object or method. The polyfill, on the other hand, replaces the objects and methods on the original objects.

For example:

<script src="js/adapter.js"></script>
<script>
    navigator.mediaDevices.getUserMedia(...);
</script>

In your code, it looks as though you are using the standard navigator.mediaDevices object. But really, the polyfill (adapter.js in the example) has replaced this object with its own one.

The one it has replaced it with is a shim. This will detect if the feature is natively supported and use it if it is, or it will work around it using other APIs if it is not.

So a polyfill is a sort of "transparent" shim. And this is what Remy Sharp (who coined the term) meant when saying "if you removed the polyfill script, your code would continue to work, without any changes required in spite of the polyfill being removed".

jQuery('#masterdiv div').html('');

I had the same error code when I used @Transaction on a wrong method/actionlevel.

methodWithANumberOfDatabaseActions() { 
   methodA( ...)
   methodA( ...)
}

@Transactional
void methodA( ...) {
  ... ERROR message
}

I had to place the @Transactional just above the method methodWithANumberOfDatabaseActions(), of course.

That solved the error message in my case.

These days, once you have LINQ available, you can convert the dictionary keys and their values to a single string.

You can use the following code:

// convert the dictionary to an array of strings
string[] strArray = dict.Select(x => ("Key: " + x.Key + ", Value: " + x.Value)).ToArray();

// convert a string array to a single string
string result = String.Join(", ", strArray);

What's going wrong with what you have? What error do you get, or what result do or don't you get that doesn't match your expectations?

I can see the following issues with that SP, which may or may not relate to your problem:

• You have an extraneous ) after @BrandName in your SELECT (at the end)
• You're not setting @CategoryID or @BrandName to anything anywhere (they're local variables, but you don't assign values to them)

Edit Responding to your comment: The error is telling you that you haven't declared any parameters for the SP (and you haven't), but you called it with parameters. Based on your reply about @CategoryID, I'm guessing you wanted it to be a parameter rather than a local variable. Try this:

CREATE PROCEDURE AddBrand
   @BrandName nvarchar(50),
   @CategoryID int
AS
BEGIN
   DECLARE @BrandID int

   SELECT @BrandID = BrandID FROM tblBrand WHERE BrandName = @BrandName

   INSERT INTO tblBrandinCategory (CategoryID, BrandID) VALUES (@CategoryID, @BrandID)
END

You would then call this like this:

EXEC AddBrand 'Gucci', 23

...assuming the brand name was 'Gucci' and category ID was 23.

I've got one more additional option to get value by id:

var idElement = document.getElementById("idName");
var selectedValue = idElement.options[idElement.selectedIndex].value;

It's a simple JavaScript solution.

You would need an IoC container if you needed to centralize the configuration of your dependencies so that they may be easily swapped out en mass. This makes the most sense in TDD, where many dependencies are swapped out, but where there is little interdependence between the dependencies. This is done at the cost of obfuscating the flow of control of object construction to some degree, so having a well organized and reasonably documented configuration is important. It is also good to have a reason to do this, otherwise, it is mere abstraction gold-plating. I have seen it done so poorly that it was dragged down to being the equivalent to a goto statement for constructors.

Below code might help you to copy the first level objects

let original = [{ a: 1 }, {b:1}]
const copy = [ ...original ].map(item=>({...item}))

so for below case, values remains intact

copy[0].a = 23
console.log(original[0].a) //logs 1 -- value didn't change voila :)

Fails for this case

let original = [{ a: {b:2} }, {b:1}]
const copy = [ ...original ].map(item=>({...item}))
copy[0].a.b = 23;
console.log(original[0].a) //logs 23 -- lost the original one :(

Final advice:

I would say go for lodash cloneDeep API which helps you to copy the objects inside objects completely dereferencing from original one's. This can be installed as a separate module.

Refer documentation: https://github.com/lodash/lodash

Individual Package : https://www.npmjs.com/package/lodash.clonedeep

In the same package you don't need to import the class.

Otherwise, it is very easy. In Eclipse or NetBeans just write the class you want to use and press on Ctrl + Space. The IDE will automatically import the class.

General information:

You can import a class with import keyword after package information:

Example:

package your_package;


import anotherpackage.anotherclass;

public class Your_Class {
    ...
    private Vector variable;
    ...
}

You can instance the class with:

Anotherclass foo = new Anotherclass();

In bootstrap, simply use mx-auto class along with navbar-brand.

I also have a Nexus 7 and Windows 7 64-bit and got ADB working by stumbling around in this thread and others about a month ago. Then it stopped working. The only thing odd I remember happening before was Windows installing some Bluetooth drivers as I started up (I do not have Bluetooth devices).

I floundered for a day this time. Now it is working again! The last thing I did was to use Device Manager to "disable" the device and reboot.

I recently used prettytable for rendering a nice ASCII table. It's similar to the postgres CLI output.

import pandas as pd
from prettytable import PrettyTable

data = [[1,2,3],[4,5,6],[7,8,9]]
df = pd.DataFrame(data, columns=['one', 'two', 'three'])

def generate_ascii_table(df):
    x = PrettyTable()
    x.field_names = df.columns.tolist()
    for row in df.values:
        x.add_row(row)
    print(x)
    return x

generate_ascii_table(df)

Output:

+-----+-----+-------+
| one | two | three |
+-----+-----+-------+
|  1  |  2  |   3   |
|  4  |  5  |   6   |
|  7  |  8  |   9   |
+-----+-----+-------+

bind tells the running process to claim a port. i.e, it should bind itself to port 80 and listen for incomming requests. with bind, your process becomes a server. when you use connect, you tell your process to connect to a port that is ALREADY in use. your process becomes a client. the difference is important: bind wants a port that is not in use (so that it can claim it and become a server), and connect wants a port that is already in use (so it can connect to it and talk to the server)

image auto fix the View

image: {
    flex: 1,
    width: null,
    height: null,
    resizeMode: 'contain'
}

It worked - To change in Eclipse, go to Window -> Preferences -> Java -> Installed JREs. Select the checked JRE/JDK and click edit.

Default VM Arguments = -Xms128m -Xmx1024m

Short answers:

Q1: Yes.

Q2: Doesn't matter which you use.

Long answer:

A select ... for update will (as it implies) select certain rows but also lock them as if they have already been updated by the current transaction (or as if the identity update had been performed). This allows you to update them again in the current transaction and then commit, without another transaction being able to modify these rows in any way.

Another way of looking at it, it is as if the following two statements are executed atomically:

select * from my_table where my_condition;

update my_table set my_column = my_column where my_condition;

Since the rows affected by my_condition are locked, no other transaction can modify them in any way, and hence, transaction isolation level makes no difference here.

Note also that transaction isolation level is independent of locking: setting a different isolation level doesn't allow you to get around locking and update rows in a different transaction that are locked by your transaction.

What transaction isolation levels do guarantee (at different levels) is the consistency of data while transactions are in progress.

you also might want to take a look at SharpOS which is an operating system that they're writing in c#.

If you have a MUTABLE collection:

val list = mutableListOf(1, 2, 3)
list += 4

If you have an IMMUTABLE collection:

var list = listOf(1, 2, 3)
list += 4

note that I use val for the mutable list to emphasize that the object is always the same, but its content changes.

In case of the immutable list, you have to make it var. A new object is created by the += operator with the additional value.

Two options... regardless of application type you can always invoke:

Assembly.GetExecutingAssembly().GetName().Version

If a Windows Forms application, you can always access via application if looking specifically for product version.

Application.ProductVersion

Using GetExecutingAssembly for an assembly reference is not always an option. As such, I personally find it useful to create a static helper class in projects where I may need to reference the underlying assembly or assembly version:

// A sample assembly reference class that would exist in the `Core` project.
public static class CoreAssembly
{
    public static readonly Assembly Reference = typeof(CoreAssembly).Assembly;
    public static readonly Version Version = Reference.GetName().Version;
}

Then I can cleanly reference CoreAssembly.Version in my code as required.

onResume() for the fragment works fine...

public class listBook extends Fragment {

    private String listbook_last_subtitle;
...

    @Override
       public void onCreate(Bundle savedInstanceState) {

        String thisFragSubtitle = (String) getActivity().getActionBar().getSubtitle();
        listbook_last_subtitle = thisFragSubtitle;
       }
...

    @Override
        public void onResume(){
            super.onResume();
            getActivity().getActionBar().setSubtitle(listbook_last_subtitle);
        }
...

The problem was that in XCode 4, the dependencies do not assume the architecture settings of the main project, as they previously did in XCode 3. I had to go through all of my dependencies setting them for the correct architecture.

You can use Facebook Chat API to send private messages, here is an example in Ruby using xmpp4r_facebook gem:

sender_chat_id = "-#{sender_uid}@chat.facebook.com"
receiver_chat_id = "-#{receiver_uid}@chat.facebook.com"
message_body = "message body"
message_subject = "message subject"

jabber_message = Jabber::Message.new(receiver_chat_id, message_body)
jabber_message.subject = message_subject

client = Jabber::Client.new(Jabber::JID.new(sender_chat_id))
client.connect
client.auth_sasl(Jabber::SASL::XFacebookPlatform.new(client,
   ENV.fetch('FACEBOOK_APP_ID'), facebook_auth.token,
   ENV.fetch('FACEBOOK_APP_SECRET')), nil)
client.send(jabber_message)
client.close

cPickle comes with the standard library… in python 2.x. You are on python 3.x, so if you want cPickle, you can do this:

>>> import _pickle as cPickle

However, in 3.x, it's easier just to use pickle.

No need to install anything. If something requires cPickle in python 3.x, then that's probably a bug.

If the randomness is controlled like this there can always generate any number of data points of a given range. If the random method in java is only used, we cannot guarantee that all the numbers will be unique.

package edu.iu.common;_x000D_
_x000D_
import java.util.ArrayList;_x000D_
import java.util.Random;_x000D_
_x000D_
public class RandomCentroidLocator {_x000D_
_x000D_
public static void main(String [] args){_x000D_
 _x000D_
 int min =0;_x000D_
 int max = 10;_x000D_
 int numCentroids = 10;_x000D_
 ArrayList<Integer> values = randomCentroids(min, max, numCentroids); _x000D_
 for(Integer i : values){_x000D_
  System.out.print(i+" ");_x000D_
 }_x000D_
 _x000D_
}_x000D_
_x000D_
private static boolean unique(ArrayList<Integer> arr, int num, int numCentroids) {_x000D_
_x000D_
 boolean status = true;_x000D_
 int count=0;_x000D_
 for(Integer i : arr){_x000D_
  if(i==num){_x000D_
   count++;_x000D_
  }_x000D_
 }_x000D_
 if(count==1){_x000D_
  status = true;_x000D_
 }else if(count>1){_x000D_
  status =false;_x000D_
 }_x000D_
 _x000D_
_x000D_
 return status;_x000D_
}_x000D_
_x000D_
// generate random centroid Ids -> these Ids can be used to retrieve data_x000D_
// from the data Points generated_x000D_
// simply we are picking up random items from the data points_x000D_
// in this case all the random numbers are unique_x000D_
// it provides the necessary number of unique and random centroids_x000D_
private static ArrayList<Integer> randomCentroids(int min, int max, int numCentroids) {_x000D_
_x000D_
 Random random = new Random();_x000D_
 ArrayList<Integer> values = new ArrayList<Integer>();_x000D_
 int num = -1;_x000D_
 int count = 0;_x000D_
 do {_x000D_
  num = random.nextInt(max - min + 1) + min;_x000D_
  values.add(num);_x000D_
  int index =values.size()-1;_x000D_
  if(unique(values, num, numCentroids)){    _x000D_
   count++;_x000D_
  }else{_x000D_
   values.remove(index);_x000D_
  }_x000D_
  _x000D_
 } while (!( count == numCentroids));_x000D_
_x000D_
 return values;_x000D_
_x000D_
}_x000D_
_x000D_
}

A simple and jQuery free solution:

document.querySelector('#elitable').onclick = function(ev) {
   // ev.target <== td element
   // ev.target.parentElement <== tr
   var index = ev.target.parentElement.rowIndex;
}

Bonus: It works even if rows are added/removed dynamically

For substracting in moment.js:

moment().subtract(1, 'months').format('MMM YYYY');

Documentation:

http://momentjs.com/docs/#/manipulating/subtract/

Before version 2.8.0, the moment#subtract(String, Number) syntax was also supported. It has been deprecated in favor of moment#subtract(Number, String).

  moment().subtract('seconds', 1); // Deprecated in 2.8.0
  moment().subtract(1, 'seconds');

As of 2.12.0 when decimal values are passed for days and months, they are rounded to the nearest integer. Weeks, quarters, and years are converted to days or months, and then rounded to the nearest integer.

  moment().subtract(1.5, 'months') == moment().subtract(2, 'months')
  moment().subtract(.7, 'years') == moment().subtract(8, 'months') //.7*12 = 8.4, rounded to 8

If you're okay with the formatting as it appears when you call the DataFrame in your coding environment, then the absolute easiest way is to just use print screen and crop the image using basic image editing software.

Here's how it turned out for me using Jupyter Notebook, and Pinta Image Editor (Ubuntu freeware).

You need to select jQuery in the dropdown on the left and you have a syntax error because the $(document).ready should end with }); not )}; Check this link.

For all the standard library types the member function empty() is a query, not a command, i.e. it means "are you empty?" not "please throw away your contents".

The clear() member function is inherited from ios and is used to clear the error state of the stream, e.g. if a file stream has the error state set to eofbit (end-of-file), then calling clear() will set the error state back to goodbit (no error).

For clearing the contents of a stringstream, using:

m.str("");

is correct, although using:

m.str(std::string());

is technically more efficient, because you avoid invoking the std::string constructor that takes const char*. But any compiler these days should be able to generate the same code in both cases - so I would just go with whatever is more readable.

Use:

max=10
for i in `eval echo {2..$max}`
do
    echo $i
done

You need the explicit 'eval' call to reevaluate the {} after variable substitution.

Adding custom button to navigation bar ( with image for buttonItem and specifying action method (void)openView{} and).

UIButton *button = [UIButton buttonWithType:UIButtonTypeCustom];
button.frame = CGRectMake(0, 0, 32, 32);
[button setImage:[UIImage imageNamed:@"settings_b.png"] forState:UIControlStateNormal];
[button addTarget:self action:@selector(openView) forControlEvents:UIControlEventTouchUpInside];

UIBarButtonItem *barButton=[[UIBarButtonItem alloc] init];
[barButton setCustomView:button];
self.navigationItem.rightBarButtonItem=barButton;

[button release];
[barButton release];

I know it's kinda late to answer but let me answer anyway, some of the answers above are quite complicated hence here is a much simpler take.

SELECT a.table_name child_table, a.column_name child_column, a.constraint_name, 
      b.table_name parent_table, b.column_name parent_column
  FROM all_cons_columns a
  JOIN all_constraints c ON a.owner = c.owner AND a.constraint_name = c.constraint_name
 join all_cons_columns b on c.owner = b.owner and c.r_constraint_name = b.constraint_name
 WHERE c.constraint_type = 'R'
   AND a.table_name = 'your table name'

If you are using SQL Server 2012, 2014 or newer, use the Format Function instead:

select Format( decimalColumnName ,'FormatString','en-US' )

Review the Microsoft topic and .NET format syntax for how to define the format string.

An example for this question would be:

select Format( MyDecimalColumn ,'N','en-US' )

file = open('ValidEmails.txt','wb')
file.write(email.encode('utf-8', 'ignore'))

This is solve your encode error also.

This worked for me. If field with name fieldA is clicked or any key entered it updates field with id fieldB.

jQuery("input[name='fieldA']").on("input", function() {
    jQuery('#fieldB').val(jQuery(this).val());
});

You could use an enum to represent your ranges,

public static enum IntRange {
  ONE_TO_FIVE, SIX_TO_TEN;
  public boolean isInRange(int v) {
    switch (this) {
    case ONE_TO_FIVE:
      return (v >= 1 && v <= 5);
    case SIX_TO_TEN:
      return (v >= 6 && v <= 10);
    }
    return false;
  }

  public static IntRange getValue(int v) {
    if (v >= 1 && v <= 5) {
      return ONE_TO_FIVE;
    } else if (v >= 6 && v <= 10) {
      return SIX_TO_TEN;
    }
    return null;
  }
}

I felt most of the examples here demonstrated the power of module rather than how ActiveSupport::Concern adds value to module.

Example 1: More readable modules.

So without concerns this how a typical module will be.

module M
  def self.included(base)
    base.extend ClassMethods
    base.class_eval do
      scope :disabled, -> { where(disabled: true) }
    end
  end

  def instance_method
    ...
  end

  module ClassMethods
    ...
  end
end

After refactoring with ActiveSupport::Concern.

require 'active_support/concern'

module M
  extend ActiveSupport::Concern

  included do
    scope :disabled, -> { where(disabled: true) }
  end

  class_methods do
    ...
  end

  def instance_method
    ...
  end
end

You see instance methods, class methods and included block are less messy. Concerns will inject them appropriately for you. That's one advantage of using ActiveSupport::Concern.

Example 2: Handle module dependencies gracefully.

module Foo
  def self.included(base)
    base.class_eval do
      def self.method_injected_by_foo_to_host_klass
        ...
      end
    end
  end
end

module Bar
  def self.included(base)
    base.method_injected_by_foo_to_host_klass
  end
end

class Host
  include Foo # We need to include this dependency for Bar
  include Bar # Bar is the module that Host really needs
end

In this example Bar is the module that Host really needs. But since Bar has dependency with Foo the Host class have to include Foo (but wait why does Host want to know about Foo? Can it be avoided?).

So Bar adds dependency everywhere it goes. And order of inclusion also matters here. This adds lot of complexity/dependency to huge code base.

After refactoring with ActiveSupport::Concern

require 'active_support/concern'

module Foo
  extend ActiveSupport::Concern
  included do
    def self.method_injected_by_foo_to_host_klass
      ...
    end
  end
end

module Bar
  extend ActiveSupport::Concern
  include Foo

  included do
    self.method_injected_by_foo_to_host_klass
  end
end

class Host
  include Bar # It works, now Bar takes care of its dependencies
end

Now it looks simple.

If you are thinking why can't we add Foo dependency in Bar module itself? That won't work since method_injected_by_foo_to_host_klass have to be injected in a class that's including Bar not on Bar module itself.

Source: Rails ActiveSupport::Concern

Using git merge --squash <feature branch> as the accepted answer suggests does the trick but it will not show the merged branch as actually merged.

Therefore an even better solution is to:

• Create a new branch from the latest master, commit in the master branch where the feature branch initiated.
• Merge <feature branch> into the above using git merge --squash
• Merge the newly created branch into master. This way, the feature branch will contain only one commit and the merge will be represented in a short and tidy illustration.

This wiki explains the procedure in detail.

In the following example, the left hand screenshot is the result of qgit and the right hand screenshot is the result of:

git log --graph --decorate --pretty=oneline --abbrev-commit

Both screenshots show the same range of commits in the same repository. Nonetheless, the right one is more compact thanks to --squash.

• Over time, the master branch deviated from db.
• When the db feature was ready, a new branch called tag was created in the same commit of master that db has its root.
• From tag a git merge --squash db was performed and then all changes were staged and committed in a single commit.
• From master, tag got merged: git merge tag.
• The branch search is irrelevant and not merged in any way.

All props to Ragnar123 for his answer.

I just wanted to expand it after the question asked by Josh Harington to talk about inserted IDs.

These will be sequential. See this answer : Does a MySQL multi-row insert grab sequential autoincrement IDs?

Hence you can just do this (notice what I did with the result.insertId):

  var statement = 'INSERT INTO ?? (' + sKeys.join() + ') VALUES ?';
  var insertStatement = [tableName, values];
  var sql = db.connection.format(statement, insertStatement);
  db.connection.query(sql, function(err, result) {
    if (err) {
      return clb(err);
    }
    var rowIds = [];
    for (var i = result.insertId; i < result.insertId + result.affectedRows; i++) {
      rowIds.push(i);
    }
    for (var i in persistentObjects) {
      var persistentObject = persistentObjects[i];
      persistentObject[persistentObject.idAttributeName()] = rowIds[i];
    }
    clb(null, persistentObjects);
  });

(I pulled the values from an array of objects that I called persistentObjects.)

Hope this helps.

You want to use transform this will return a Series with the index aligned to the df so you can then add it as a new column:

In [74]:

df = pd.DataFrame({'Date': ['2015-05-08', '2015-05-07', '2015-05-06', '2015-05-05', '2015-05-08', '2015-05-07', '2015-05-06', '2015-05-05'], 'Sym': ['aapl', 'aapl', 'aapl', 'aapl', 'aaww', 'aaww', 'aaww', 'aaww'], 'Data2': [11, 8, 10, 15, 110, 60, 100, 40],'Data3': [5, 8, 6, 1, 50, 100, 60, 120]})
?
df['Data4'] = df['Data3'].groupby(df['Date']).transform('sum')
df
Out[74]:
   Data2  Data3        Date   Sym  Data4
0     11      5  2015-05-08  aapl     55
1      8      8  2015-05-07  aapl    108
2     10      6  2015-05-06  aapl     66
3     15      1  2015-05-05  aapl    121
4    110     50  2015-05-08  aaww     55
5     60    100  2015-05-07  aaww    108
6    100     60  2015-05-06  aaww     66
7     40    120  2015-05-05  aaww    121

I finally discover the error. The problem is that the primary key constraint name is equal the table name. I don know how postgres represents constraints, but I think the error "Relation already exists" was being triggered during the creation of the primary key constraint because the table was already declared. But because of this error, the table wasnt created at the end.

JSON decoding in JavaScript is simply an eval() if you trust the string or the more safe code you can find on http://json.org if you don't.

You will then have a JavaScript datastructure that you can traverse for the data you need.

In my case, I could not get the answer by @Sampson to work for me, at best I got a single column centered on the page. In the process however, I learned how the float actually works and created this solution. At it's core the fix is very simple but hard to find as evident by this thread which has had more than 146k views at the time of this post without mention.

All that is needed is to total the amount of screen space width that the desired layout will occupy then make the parent the same width and apply margin:auto. That's it!

The elements in the layout will dictate the width and height of the "outer" div. Take each "myFloat" or element's width or height + its borders + its margins and its paddings and add them all together. Then add the other elements together in the same fashion. This will give you the parent width. They can all be somewhat different sizes and you can do this with fewer or more elements.

Ex.(each element has 2 sides so border, margin and padding get multiplied x2)

So an element that has a width of 10px, border 2px, margin 6px, padding 3px would look like this: 10 + 4 + 12 + 6 = 32

Then add all of your element's totaled widths together.

Element 1 = 32
Element 2 = 24
Element 3 = 32
Element 4 = 24

In this example the width for the "outer" div would be 112.

.outer {_x000D_
  /* floats + margins + borders = 270 */_x000D_
  max-width: 270px;_x000D_
  margin: auto;_x000D_
  height: 80px;_x000D_
  border: 1px;_x000D_
  border-style: solid;_x000D_
}_x000D_
_x000D_
.myFloat {_x000D_
    /* 3 floats x 50px = 150px */_x000D_
    width: 50px;_x000D_
    /* 6 margins x 10px = 60 */_x000D_
    margin: 10px;_x000D_
    /* 6 borders x 10px = 60 */_x000D_
    border: 10px solid #6B6B6B;_x000D_
    float: left;_x000D_
    text-align: center;_x000D_
    height: 40px;_x000D_
}

<div class="outer">_x000D_
  <div class="myFloat">Float 1</div>_x000D_
  <div class="myFloat">Float 2</div>_x000D_
  <div class="myFloat">Float 3</div>_x000D_
</div>

Add Below Code in XML

    <TextView
    android:text="Shops NearBy textdf fsdgsdgsdg dsgtsgsdgsdgsg"
    android:id="@+id/txtEventName"
    android:ellipsize="marquee"
    android:marqueeRepeatLimit ="marquee_forever"
    android:focusable="true"
    android:focusableInTouchMode="true"
    android:scrollHorizontally="true"
    android:singleLine="true"/>

In Java add following Code:

    TextView txtEventName=(TextView)findViewById(R.id.txtEventName);
    txtEventName.setSelected(true);

The problem is that the execution policy is set on a per user basis. You'll need to run the following command in your application every time you run it to enable it to work:

Set-ExecutionPolicy -Scope Process -ExecutionPolicy RemoteSigned

There probably is a way to set this for the ASP.NET user as well, but this way means that you're not opening up your whole system, just your application.

(Source)

If you got nothing when inputted fastboot devices, it meaned you devices fail to enter fastboot model. Make sure that you enter fastboot model via press these three button simultaneously, power key, volume key(both '+' and '-'). Then you can see you devices via fastboot devices and continue to flash your devices.

note:I entered fastboot model only pressed 'power key' and '-' key before, and present the same problem.

In one of the INSERT statements you are attempting to insert a too long string into a string (varchar or nvarchar) column.

If it's not obvious which INSERT is the offender by a mere look at the script, you could count the <1 row affected> lines that occur before the error message. The obtained number plus one gives you the statement number. In your case it seems to be the second INSERT that produces the error.

In market client on phones at least featured apps with high ratings get to display the promotional graphic.

This is the one that shows up on top even before you start searching the market for a specific app.

See this answer from Android market forum.

Edited: One of the google employee gives some clarifications here

Update: Both links above are now broken but the detailed information can be found here

Selected applications have the ability to be featured atop their respective categories. This is not a guaranteed feature, but uploading promotional graphics is something that we recommend.

If you have saved the excel file in the same folder as your python program (relative paths) then you just need to mention sheet number along with file name.

Example:

 data = pd.read_excel("wt_vs_ht.xlsx", "Sheet2")
 print(data)
 x = data.Height
 y = data.Weight
 plt.plot(x,y,'x')
 plt.show()

Always you can do it manually. Those are the steps:

• Go to the NPM package page, and search for the GitHub link.
• Now download the latest version using GitHub download link, or by clonning. git clone github_url
• Copy the package to your node_modules folder for e.g. node_modules/browser-sync

Now it should work for you. To be sure it will not break in the future when you do npm i, continue the upcoming two steps:

• Check the version of the new package by reading the package.json file in it's folder.
• Open your project package.json and set the same version for where it's appear in the dependencies part of your package.json

While it's not recommened to do it manually. Sometimes it's good to understand how things are working under the hood, to be able to fix things. I found myself doing it from time to time.

I had problems correctly displaying some symbols with regular download as pdf. So downloaded as tex jupyter nbconvert --to latex "my notebook.ipynb", made some tweaks with notepad (as an example, in my case I needed these lines for my language

\usepackage{tgpagella}
\usepackage[lithuanian,english]{babel}

) and then exported to pdf with latex --output-format=pdf "my notebook.tex".

But finally, however, to retain the same characters as you see in a browser I ended up using my Chrome browser printing: Ctrl+P Print to pdf. It adds unnecessary header and footer but everything else remains as it is. No more errors processing tqdm progress bar, no more code going out of the page and so on. Simple as that.

Read these tutorials Asp.net Update Panel and Introduction to the UpdatePanel Control

Simple and understandable

You should use the setString() method to set the userID. This both ensures that the statement is formatted properly, and prevents SQL injection:

statement =con.prepareStatement("SELECT * from employee WHERE  userID = ?");
statement.setString(1, userID);

There is a nice tutorial on how to use PreparedStatements properly in the Java Tutorials.

With Python 3, you could do:

import socket
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
server = "www.google.com"
port = 80
server_ip = socket.gethostbyname(server)
print(str(server_ip))

The simplest way is using pip command:

pip list | grep Keras

When you call classes with the same names, you must explicitly specify the package from which the class is called.

You can to do like this:

import first.Foo;

public class Main {
    public static void main(String[] args) {
        System.out.println(new Foo());
        System.out.println(new second.Foo());
    }
}



package first;

public class Foo {
    public Foo() {
    }

    @Override
    public String toString() {
        return "Foo{first class}";
    }
}



package second;

public class Foo {
    public Foo() {
    }

    @Override
    public String toString() {
        return "Foo{second class}";
    }
}

Output:

Foo{first class}
Foo{second class}

You can consider shapely:

from shapely.geometry import Point
from shapely.geometry.polygon import Polygon

point = Point(0.5, 0.5)
polygon = Polygon([(0, 0), (0, 1), (1, 1), (1, 0)])
print(polygon.contains(point))

From the methods you've mentioned I've only used the second, path.contains_points, and it works fine. In any case depending on the precision you need for your test I would suggest creating a numpy bool grid with all nodes inside the polygon to be True (False if not). If you are going to make a test for a lot of points this might be faster (although notice this relies you are making a test within a "pixel" tolerance):

from matplotlib import path
import matplotlib.pyplot as plt
import numpy as np

first = -3
size  = (3-first)/100
xv,yv = np.meshgrid(np.linspace(-3,3,100),np.linspace(-3,3,100))
p = path.Path([(0,0), (0, 1), (1, 1), (1, 0)])  # square with legs length 1 and bottom left corner at the origin
flags = p.contains_points(np.hstack((xv.flatten()[:,np.newaxis],yv.flatten()[:,np.newaxis])))
grid = np.zeros((101,101),dtype='bool')
grid[((xv.flatten()-first)/size).astype('int'),((yv.flatten()-first)/size).astype('int')] = flags

xi,yi = np.random.randint(-300,300,100)/100,np.random.randint(-300,300,100)/100
vflag = grid[((xi-first)/size).astype('int'),((yi-first)/size).astype('int')]
plt.imshow(grid.T,origin='lower',interpolation='nearest',cmap='binary')
plt.scatter(((xi-first)/size).astype('int'),((yi-first)/size).astype('int'),c=vflag,cmap='Greens',s=90)
plt.show()

, the results is this: