SyntaxFix.com - Programming Questions & Answers Hub For Beginners

It all looks ok, your code will be fine, unless you're doing this in a tight loop. I also would consider

double min;
min = (a<b) ? a : b;
min = (min<c) ? min : c;

Date.now() returns a unix timestamp in milliseconds.

const now = Date.now(); // Unix timestamp in milliseconds_x000D_
console.log( now );

Prior to ECMAScript5 (I.E. Internet Explorer 8 and older) you needed to construct a Date object, from which there are several ways to get a unix timestamp in milliseconds:

console.log( +new Date );_x000D_
console.log( (new Date).getTime() );_x000D_
console.log( (new Date).valueOf() );

If you want to recursively apply this change to all files in a directoy, you can use the Find > Find in Files... modal:

Edit I didn't highlight it in the image, but you have to click the .* button on the left to have Sublime interpret the Find field as a regex /Edit

Edit 2 I neglected to add a start of string anchor to the regex. I'm correcting that below, and will update the image when I get a chance /Edit

The regex in the Find field ^[^\S\t\n\r]{4} will match white space characters in groups of 4 (excluding tabs and newline characters). The replace field \t indicates you would like to replace them with tabs.

If you click the button to the right of the Where field, you'll see options that will help you target your search, replace. Add Folder option will let you select the folder you'd like to recursively search from. The Add Include Filter option will let you restrict the search to files of a certain extension.

There is actually a reason behind why all these are messed up. A little more digging deeper is done in this thread and might be helpful to understand the reason why "\\" behaves like this.

Use MacPorts:

$ sudo port install watch

I would test noneness before stripping. Also, I would use the fact that empty strings are False (or Falsy). This approach is similar to Apache's StringUtils.isBlank or Guava's Strings.isNullOrEmpty

This is what I would use to test if a string is either None OR Empty OR Blank:

def isBlank (myString):
    if myString and myString.strip():
        #myString is not None AND myString is not empty or blank
        return False
    #myString is None OR myString is empty or blank
    return True

And, the exact opposite to test if a string is not None NOR Empty NOR Blank:

def isNotBlank (myString):
    if myString and myString.strip():
        #myString is not None AND myString is not empty or blank
        return True
    #myString is None OR myString is empty or blank
    return False

More concise forms of the above code:

def isBlank (myString):
    return not (myString and myString.strip())

def isNotBlank (myString):
    return bool(myString and myString.strip())

You can use DataContractJsonSerializer. See this link for more details.

You can hide a part of JFrame that contains the swing controls which you want on another JFrame.

When the user clicks on a Jbutton the JFrame width increases and when he clicks on another same kind of Jbutton the JFrame comes to the default size.

  JFrame myFrame = new JFrame("");
  JButton button1 = new JButton("Basic");
  JButton button2 = new JButton("More options");
 // actionPerformed block code for button1 (Default size)  
 myFrame.setSize(400, 400);
//  actionPerformed block code for button2 (Increase width)
 myFrame.setSize(600, 400);

To get the number of days difference by two dates:

(start.to_date...end.to_date).count - 1
or 
(end.to_date - start.to_date).to_i

This (Ondrej's answer):

Foo[] array = list.toArray(new Foo[0]);

Is the most common idiom I see. Those who are suggesting that you use the actual list size instead of "0" are misunderstanding what's happening here. The toArray call does not care about the size or contents of the given array - it only needs its type. It would have been better if it took an actual Type in which case "Foo.class" would have been a lot clearer. Yes, this idiom generates a dummy object, but including the list size just means that you generate a larger dummy object. Again, the object is not used in any way; it's only the type that's needed.

you can use rindex() function to get the last occurrence of a character in string

s="hellloooloo"
b='l'
print(s.rindex(b))

This : /^[a-zA-Z0-9._-]+@[a-zA-Z0-9.-]+\.[a-zA-Z]{2,4}$/i is not working for below Gmail case

[email protected] [email protected]

Below Regex will cover all the E-mail Points: I have tried the all Possible Points and my Test case get also pass because of below regex

I found this Solution from this URL:

Regex Solution link

/(?:((?:[\w-]+(?:\.[\w-]+)*)@(?:(?:[\w-]+\.)*\w[\w-]{0,66})\.(?:[a-z]{2,6}(?:\.[a-z]{2})?));*)/g

Create hash as:

h = Hash.new
=> {}

Now insert into hash as:

h = Hash["one" => 1]

If you really won't (or can't) use a generic collection instead of your array, Array.Resize is c#'s version of redim preserve:

var  oldA = new [] {1,2,3,4};
Array.Resize(ref oldA,10);
foreach(var i in oldA) Console.WriteLine(i); //1 2 3 4 0 0 0 0 0 0

The above methods work when you are connected to a Wi-Fi source or via cell phone data packs. But in case of Wi-Fi connection there are cases when you are further asked to Sign-In like in Cafe. So in that case your application will fail as you are connected to Wi-Fi source but not with the Internet.

This method works fine.

    public static boolean isConnected(Context context) {
        ConnectivityManager cm = (ConnectivityManager)context
                .getSystemService(Context.CONNECTIVITY_SERVICE);

    NetworkInfo activeNetwork = cm.getActiveNetworkInfo();
    if (activeNetwork != null && activeNetwork.isConnected()) {
        try {
            URL url = new URL("http://www.google.com/");
            HttpURLConnection urlc = (HttpURLConnection)url.openConnection();
            urlc.setRequestProperty("User-Agent", "test");
            urlc.setRequestProperty("Connection", "close");
            urlc.setConnectTimeout(1000); // mTimeout is in seconds
            urlc.connect();
            if (urlc.getResponseCode() == 200) {
                return true;
            } else {
                return false;
            }
        } catch (IOException e) {
            Log.i("warning", "Error checking internet connection", e);
            return false;
        }
    }

    return false;

}

Please use this in a separate thread from the main thread as it makes a network call and will throw NetwrokOnMainThreadException if not followed.

And also do not put this method inside onCreate or any other method. Put it inside a class and access it.

DECLARE @dayNumber INT;
SET @dayNumber = DATEPART(DW, GETDATE());

--Sunday = 1, Saturday = 7.
IF(@dayNumber = 1 OR @dayNumber = 7) 
    PRINT 'Weekend';
ELSE
    PRINT 'NOT Weekend';

This may generate wrong results, because the number produced by the weekday datepart depends on the value set by SET DATEFIRST. This sets the first day of the week. So another way is:

DECLARE @dayName VARCHAR(9);
SET @dayName = DATEName(DW, GETDATE());

IF(@dayName = 'Saturday' OR @dayName = 'Sunday') 
    PRINT 'Weekend';
ELSE
    PRINT 'NOT Weekend';

In case you're using ASP.NET 5 with ASP.NET MVC 6, most of these answers simply won't work because you'll normally let MVC create the appropriate route collection for you (using the default RESTful conventions), meaning that you won't find any Routes.MapRoute() call to edit at will.

The ConfigureServices() method invoked by the Startup.cs file will register MVC with the Dependency Injection framework built into ASP.NET 5: that way, when you call ApplicationBuilder.UseMvc() later in that class, the MVC framework will automatically add these default routes to your app. We can take a look of what happens behind the hood by looking at the UseMvc() method implementation within the framework source code:

public static IApplicationBuilder UseMvc(
    [NotNull] this IApplicationBuilder app,
    [NotNull] Action<IRouteBuilder> configureRoutes)
{
    // Verify if AddMvc was done before calling UseMvc
    // We use the MvcMarkerService to make sure if all the services were added.
    MvcServicesHelper.ThrowIfMvcNotRegistered(app.ApplicationServices);

    var routes = new RouteBuilder
    {
        DefaultHandler = new MvcRouteHandler(),
        ServiceProvider = app.ApplicationServices
    };

    configureRoutes(routes);

    // Adding the attribute route comes after running the user-code because
    // we want to respect any changes to the DefaultHandler.
    routes.Routes.Insert(0, AttributeRouting.CreateAttributeMegaRoute(
        routes.DefaultHandler,
        app.ApplicationServices));

    return app.UseRouter(routes.Build());
}

The good thing about this is that the framework now handles all the hard work, iterating through all the Controller's Actions and setting up their default routes, thus saving you some redundant work.

The bad thing is, there's little or no documentation about how you could add your own routes. Luckily enough, you can easily do that by using either a Convention-Based and/or an Attribute-Based approach (aka Attribute Routing).

Convention-Based

In your Startup.cs class, replace this:

app.UseMvc();

with this:

app.UseMvc(routes =>
            {
                // Route Sample A
                routes.MapRoute(
                    name: "RouteSampleA",
                    template: "MyOwnGet",
                    defaults: new { controller = "Items", action = "Get" }
                );
                // Route Sample B
                routes.MapRoute(
                    name: "RouteSampleB",
                    template: "MyOwnPost",
                    defaults: new { controller = "Items", action = "Post" }
                );
            });

Attribute-Based

A great thing about MVC6 is that you can also define routes on a per-controller basis by decorating either the Controller class and/or the Action methods with the appropriate RouteAttribute and/or HttpGet / HttpPost template parameters, such as the following:

using System;
using System.Collections.Generic;
using System.Linq;
using System.Threading.Tasks;
using Microsoft.AspNet.Mvc;

namespace MyNamespace.Controllers
{
    [Route("api/[controller]")]
    public class ItemsController : Controller
    {
        // GET: api/items
        [HttpGet()]
        public IEnumerable<string> Get()
        {
            return GetLatestItems();
        }

        // GET: api/items/5
        [HttpGet("{num}")]
        public IEnumerable<string> Get(int num)
        {
            return GetLatestItems(5);
        }       

        // GET: api/items/GetLatestItems
        [HttpGet("GetLatestItems")]
        public IEnumerable<string> GetLatestItems()
        {
            return GetLatestItems(5);
        }

        // GET api/items/GetLatestItems/5
        [HttpGet("GetLatestItems/{num}")]
        public IEnumerable<string> GetLatestItems(int num)
        {
            return new string[] { "test", "test2" };
        }

        // POST: /api/items/PostSomething
        [HttpPost("PostSomething")]
        public IActionResult Post([FromBody]string someData)
        {
            return Content("OK, got it!");
        }
    }
}

This controller will handle the following requests:

 [GET] api/items
 [GET] api/items/5
 [GET] api/items/GetLatestItems
 [GET] api/items/GetLatestItems/5
 [POST] api/items/PostSomething

Also notice that if you use the two approaches togheter, Attribute-based routes (when defined) would override Convention-based ones, and both of them would override the default routes defined by UseMvc().

For more info, you can also read the following post on my blog.

An option for delegates in C++ that is not otherwise mentioned here is to do it C style using a function ptr and a context argument. This is probably the same pattern that many asking this question are trying to avoid. But, the pattern is portable, efficient, and is usable in embedded and kernel code.

class SomeClass
{
    in someMember;
    int SomeFunc( int);

    static void EventFunc( void* this__, int a, int b, int c)
    {
        SomeClass* this_ = static_cast< SomeClass*>( this__);

        this_->SomeFunc( a );
        this_->someMember = b + c;
    }
};

void ScheduleEvent( void (*delegateFunc)( void*, int, int, int), void* delegateContext);

    ...
    SomeClass* someObject = new SomeObject();
    ...
    ScheduleEvent( SomeClass::EventFunc, someObject);
    ...

Your code will work but you need to flip the 4th and the 5th argument.

I would do it this way

$date_string = "2012-10-18";
$date_int = strtotime($date_string);
$date_date = date($date_int);
$week_number = date('W', $date_date);
echo "Weeknumber: {$week_number}.";

Also, your variable names will be confusing to you after a week of not looking at that code, you should consider reading http://net.tutsplus.com/tutorials/php/why-youre-a-bad-php-programmer/

a)

from selenium.common.exceptions import NoSuchElementException        
def check_exists_by_xpath(xpath):
    try:
        webdriver.find_element_by_xpath(xpath)
    except NoSuchElementException:
        return False
    return True

b) use xpath - the most reliable. Moreover you can take the xpath as a standard throughout all your scripts and create functions as above mentions for universal use.

UPDATE: I wrote the initial answer over 4 years ago and at the time I thought xpath would be the best option. Now I recommend to use css selectors. I still recommend not to mix/use "by id", "by name" and etc and use one single approach instead.

We copy/paste html pages from our ERP to Excel using "paste special.. as html/unicode" and it works quite well with tables.

When scanning closed port it becomes unresponsive for long time. It seems to be quicker when resolving fqdn to ip like:

[System.Net.Dns]::GetHostAddresses("www.msn.com").IPAddressToString

For an organization or a business, there are so many physical entities (such as people, resources, machines, etc.) and virtual entities (their Tasks, transactions, activities). Typically, business needs to record and process information of those business entities. These business entities are identified within a whole business domain by a Key.

As per RDBMS prospective, Key (a.k.a Candidate Key) is a value or set of values that uniquely identifies an entity.

For a DB-Table, there are so many keys are exist and might be eligible for Primary Key. So that all keys, primary key, unique key, etc are collectively called as Candidate Key. However, DBA selected a key from candidate key for searching records is called Primary key.

Difference between Primary Key and Unique key

1. Behavior: Primary Key is used to identify a row (record) in a table, whereas Unique-key is to prevent duplicate values in a column (with the exception of a null entry).

2. Indexing: By default SQL-engine creates Clustered Index on primary-key if not exists and Non-Clustered Index on Unique-key.

3. Nullability: Primary key does not include Null values, whereas Unique-key can.

4. Existence: A table can have at most one primary key, but can have multiple Unique-key.

5. Modifiability: You can’t change or delete primary values, but Unique-key values can.

For more information and Examples:

http://dotnetauthorities.blogspot.in/2013/11/Microsoft-SQL-Server-Training-Online-Learning-Classes-Integrity-Constraints-PrimaryKey-Unique-Key_27.html

You forgot the table in your syntax:

drop table [table_name]

which drops a table.

Using

drop table if exists [table_name]

checks if the table exists before dropping it.
If it exists, it gets dropped.
If not, no error will be thrown and no action be taken.

import numpy
a = numpy.array([1,2,3])

with open(r'test.txt', 'w') as f:
    f.write(" ".join(map(str, a)))

This function reads a CSV file of 15MB and copies its content into a sheet in about 3 secs. What is probably taking a lot of time in your code is the fact that you copy data cell by cell instead of putting the whole content at once.

Option Explicit

Public Sub test()

  copyDataFromCsvFileToSheet "C:\temp\test.csv", ",", "Sheet1"

End Sub

Private Sub copyDataFromCsvFileToSheet(parFileName As String, parDelimiter As String, parSheetName As String)

  Dim data As Variant

  data = getDataFromFile(parFileName, parDelimiter)
  If Not isArrayEmpty(data) Then
    With Sheets(parSheetName)
      .Cells.ClearContents
      .Cells(1, 1).Resize(UBound(data, 1), UBound(data, 2)) = data
    End With
  End If

End Sub

Public Function isArrayEmpty(parArray As Variant) As Boolean
'Returns false if not an array or dynamic array that has not been initialised (ReDim) or has been erased (Erase)

  If IsArray(parArray) = False Then isArrayEmpty = True
  On Error Resume Next
  If UBound(parArray) < LBound(parArray) Then isArrayEmpty = True: Exit Function Else: isArrayEmpty = False

End Function

Private Function getDataFromFile(parFileName As String, parDelimiter As String, Optional parExcludeCharacter As String = "") As Variant
'parFileName is supposed to be a delimited file (csv...)
'parDelimiter is the delimiter, "," for example in a comma delimited file
'Returns an empty array if file is empty or can't be opened
'number of columns based on the line with the largest number of columns, not on the first line
'parExcludeCharacter: sometimes csv files have quotes around strings: "XXX" - if parExcludeCharacter = """" then removes the quotes


  Dim locLinesList() As Variant
  Dim locData As Variant
  Dim i As Long
  Dim j As Long
  Dim locNumRows As Long
  Dim locNumCols As Long
  Dim fso As Variant
  Dim ts As Variant
  Const REDIM_STEP = 10000

  Set fso = CreateObject("Scripting.FileSystemObject")

  On Error GoTo error_open_file
  Set ts = fso.OpenTextFile(parFileName)
  On Error GoTo unhandled_error

  'Counts the number of lines and the largest number of columns
  ReDim locLinesList(1 To 1) As Variant
  i = 0
  Do While Not ts.AtEndOfStream
    If i Mod REDIM_STEP = 0 Then
      ReDim Preserve locLinesList(1 To UBound(locLinesList, 1) + REDIM_STEP) As Variant
    End If
    locLinesList(i + 1) = Split(ts.ReadLine, parDelimiter)
    j = UBound(locLinesList(i + 1), 1) 'number of columns
    If locNumCols < j Then locNumCols = j
    i = i + 1
  Loop

  ts.Close

  locNumRows = i

  If locNumRows = 0 Then Exit Function 'Empty file

  ReDim locData(1 To locNumRows, 1 To locNumCols + 1) As Variant

  'Copies the file into an array
  If parExcludeCharacter <> "" Then

    For i = 1 To locNumRows
      For j = 0 To UBound(locLinesList(i), 1)
        If Left(locLinesList(i)(j), 1) = parExcludeCharacter Then
          If Right(locLinesList(i)(j), 1) = parExcludeCharacter Then
            locLinesList(i)(j) = Mid(locLinesList(i)(j), 2, Len(locLinesList(i)(j)) - 2)       'If locTempArray = "", Mid returns ""
          Else
            locLinesList(i)(j) = Right(locLinesList(i)(j), Len(locLinesList(i)(j)) - 1)
          End If
        ElseIf Right(locLinesList(i)(j), 1) = parExcludeCharacter Then
          locLinesList(i)(j) = Left(locLinesList(i)(j), Len(locLinesList(i)(j)) - 1)
        End If
        locData(i, j + 1) = locLinesList(i)(j)
      Next j
    Next i

  Else

    For i = 1 To locNumRows
      For j = 0 To UBound(locLinesList(i), 1)
        locData(i, j + 1) = locLinesList(i)(j)
      Next j
    Next i

  End If

  getDataFromFile = locData

  Exit Function

error_open_file:             'returns empty variant
unhandled_error:             'returns empty variant

End Function

Here is a tidyverse option that might not the most elegant, but offers some flexibility in terms of what is included in the summary:

library(tidyverse)
dir_path <- '~/path/to/data/directory/'
file_pattern <- 'Df\\.[0-9]\\.csv' # regex pattern to match the file name format

read_dir <- function(dir_path, file_name){
  read_csv(paste0(dir_path, file_name)) %>% 
    mutate(file_name = file_name) %>%                # add the file name as a column              
    gather(variable, value, A:B) %>%                 # convert the data from wide to long
    group_by(file_name, variable) %>% 
    summarize(sum = sum(value, na.rm = TRUE),
              min = min(value, na.rm = TRUE),
              mean = mean(value, na.rm = TRUE),
              median = median(value, na.rm = TRUE),
              max = max(value, na.rm = TRUE))
  }

df_summary <- 
  list.files(dir_path, pattern = file_pattern) %>% 
  map_df(~ read_dir(dir_path, .))

df_summary
# A tibble: 8 x 7
# Groups:   file_name [?]
  file_name variable   sum   min  mean median   max
  <chr>     <chr>    <int> <dbl> <dbl>  <dbl> <dbl>
1 Df.1.csv  A           34     4  5.67    5.5     8
2 Df.1.csv  B           22     1  3.67    3       9
3 Df.2.csv  A           21     1  3.5     3.5     6
4 Df.2.csv  B           16     1  2.67    2.5     5
5 Df.3.csv  A           30     0  5       5      11
6 Df.3.csv  B           43     1  7.17    6.5    15
7 Df.4.csv  A           21     0  3.5     3       8
8 Df.4.csv  B           42     1  7       6      16

Didnt work for me.

I created a new key and string value and managed to get it working

Key= HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Application\<Your app name>\
String EventMessageFile value=C:\Windows\Microsoft.NET\Framework\v2.0.50727\EventLogMessages.dll

A filter argument with a trailing * can be evaluated almost instantaneously via an index lookup. A leading * implies a sequential search through the index, so it is O(N). It will take ages.

I suggest you reconsider the requirement.

Be careful using SelectedItem.Text... If there is no item selected, then SelectedItem will be null and SelectedItem.Text will generate a null-value exception.

.NET should have provided a SelectedText property like the SelectedValue property that returns String.Empty when there is no selected item.

prop.table is a nice friendly way of obtaining proportions of tables.

m <- matrix(1:4,2)

 m
     [,1] [,2]
[1,]    1    3
[2,]    2    4

Leaving margin blank gives you proportions of the whole table

 prop.table(m, margin=NULL)
     [,1] [,2]
[1,]  0.1  0.3
[2,]  0.2  0.4

Giving it 1 gives you row proportions

 prop.table(m, 1)
      [,1]      [,2]
[1,] 0.2500000 0.7500000
[2,] 0.3333333 0.6666667

And 2 is column proportions

 prop.table(m, 2)
          [,1]      [,2]
[1,] 0.3333333 0.4285714
[2,] 0.6666667 0.5714286

It seems to be a cast exception. Can you try converting your result to a list i.e. elem.findElements(xx).toList ?

If you wrap your form elements in a form tag with a name attribute you can easily get the value using document.formName.radioGroupName.value.

<form name="myForm">
    <input type="radio" id="genderm" name="gender" value="male" />
    <label for="genderm">Male</label>
    <input type="radio" id="genderf" name="gender" value="female" />
    <label for="genderf">Female</label>
</form>

<script>
    var selected = document.forms.myForm.gender.value;
</script>

Here is a successful example of an implementation of the same thing, on a device which supported lower screen brightness values (I tested on an Allwinner Chinese 7" tablet running API15).

WindowManager.LayoutParams params = this.getWindow().getAttributes();

/** Turn off: */
params.flags = WindowManager.LayoutParams.FLAG_KEEP_SCREEN_ON;
//TODO Store original brightness value
params.screenBrightness = 0.1f;
this.getWindow().setAttributes(params);

/** Turn on: */
params.flags = WindowManager.LayoutParams.FLAG_KEEP_SCREEN_ON;
//TODO restoring from original value
params.screenBrightness = 0.9f;
this.getWindow().setAttributes(params);

If someone else tries this out, pls comment below if it worked/didn't work and the device, Android API.

I'm here in general only to find out that through dict it is necessary to work inside setattr XD

UPDATE your_table set your_field="" where your_field is null

Thing is an inner class with an automatic connection to an instance of Hello. You get a compile error because there is no instance of Hello for it to attach to. You can fix it most easily by changing it to a static nested class which has no connection:

static class Thing

I would use:

hash.map { |key, value| value }

overflow: auto; or overflow: hidden; should do it I think.

Combine Mixin with Extend

I just stumbled upon a combination of Mixin and Extend:

reused blocks:

.block1 { box-shadow: 0 5px 10px #000; }

.block2 { box-shadow: 5px 0 10px #000; }

.block3 { box-shadow: 0 0 1px #000; }

dynamic mixin:

@mixin customExtend($class){ @extend .#{$class}; }

use mixin:

like: @include customExtend(block1);

h1 {color: fff; @include customExtend(block2);}

Sass will compile only the mixins content to the extended blocks, which makes it able to combine blocks without generating duplicate code. The Extend logic only puts the classname of the Mixin import location in the block1, ..., ... {box-shadow: 0 5px 10px #000;}

There is no v4.5 shown in the gui, and typically you don't need to manually specify v4.5 since it's an in-place update. However, you can set it explicitly with appcmd like this:

appcmd set apppool /apppool.name: [App Pool Name] /managedRuntimeVersion:v4.5

Appcmd is located in %windir%\System32\inetsrv. This helped me to fix an issue with Web Deploy, where it was throwing an ERROR_APPPOOL_VERSION_MISMATCH error after upgrading from v4.0 to v4.5.

MS article on setting .Net version for App Pool

Actually using 100% will not make the image bigger if the image is smaller than the div size you specified. You need to set one of the dimensions, height or width in order to have all images fill the space. In my experience it's better to have the height set so each row is the same size, then all items wrap to next line properly. This will produce an output similar to fotolia.com (stock image website)

with css:

parent {
   width: 42px; /* I took the width from your post and placed it in css */
   height: 42px;
}

/* This will style any <img> element in .parent div */
.parent img {
   height: 42px;
}

without:

<div style="height:42px;width:42px">
    <img style="height:42px" src="http://someimage.jpg">
</div>

You'll need to write an insert trigger, and possible an update trigger if you want it to change when the record is changed. This article explains it quite nicely:

http://www.revsys.com/blog/2006/aug/04/automatically-updating-a-timestamp-column-in-postgresql/

CREATE OR REPLACE FUNCTION update_modified_column()   
RETURNS TRIGGER AS $$
BEGIN
    NEW.modified = now();
    RETURN NEW;   
END;
$$ language 'plpgsql';

Apply the trigger like this:

CREATE TRIGGER update_customer_modtime BEFORE UPDATE ON customer FOR EACH ROW EXECUTE PROCEDURE  update_modified_column();

Another option which has not been suggested here is to run the app you want to monitor in the Android emulator from the Android SDK. You can then easily capture the traffic with wireshark on the same machine.

This was the easiest option for me.

Adding to the other great answers, we can use the Python logging library's debug(), info(), warning(), error(), and critical() methods. Quoting from the docs for Python 3.7.4,

There are three keyword arguments in kwargs which are inspected: exc_info which, if it does not evaluate as false, causes exception information to be added to the logging message.

What this means is, you can use the Python logging library to output a debug(), or other type of message, and the logging library will include the stack trace in its output. With this in mind, we can do the following:

import logging

logger = logging.getLogger()
logger.setLevel(logging.DEBUG)

def f():
    a = { 'foo': None }
    # the following line will raise KeyError
    b = a['bar']

def g():
    f()

try:
    g()
except Exception as e:
    logger.error(str(e), exc_info=True)

And it will output:

'bar'
Traceback (most recent call last):
  File "<ipython-input-2-8ae09e08766b>", line 18, in <module>
    g()
  File "<ipython-input-2-8ae09e08766b>", line 14, in g
    f()
  File "<ipython-input-2-8ae09e08766b>", line 10, in f
    b = a['bar']
KeyError: 'bar'

Don't use array_values on your $row

$res_arr_values = array();
while ($row = mysql_fetch_array($result, MYSQL_ASSOC))
   {
       array_push($res_arr_values, $row);
   }

Also, the preferred way to add a value to an array is writing $array[] = $value;, not using array_push

$res_arr_values = array();
while ($row = mysql_fetch_array($result, MYSQL_ASSOC))
   {
       $res_arr_values[] = $row;
   }

And a further optimization is not to call mysql_fetch_array($result, MYSQL_ASSOC) but to use mysql_fetch_assoc($result) directly.

$res_arr_values = array();
while ($row = mysql_fetch_assoc($result))
   {
       $res_arr_values[] = $row;
   }

Define the width as 960px, or whatever you prefer, and you're good to go!

#main {
 margin: 0 auto !important;
 float: none !important;
 text-align: center;
 width: 960px;
}

(I couldn't figure this out until I fixed the width, nothing else worked.)

Bad practice definitely. One reason is that it is not very 'user-friendly' for the fact that every JFrame shows a new taskbar icon. Controlling multiple JFrames will have you ripping your hair out.

Personally, I would use ONE JFrame for your kind of application. Methods of displaying multiple things is up to you, there are many. Canvases, JInternalFrame, CardLayout, even JPanels possibly.

Multiple JFrame objects = Pain, trouble, and problems.

While there are a lot of nice answers here, I didn't see a solution posted that both includes unsetting environment variables on deactivate and doesn't require additional libraries beyond virtualenv, so here's my solution that just involves editing /bin/activate, using the variables MY_SERVER_NAME and MY_DATABASE_URL as examples:

There should be a definition for deactivate in the activate script, and you want to unset your variables at the end of it:

deactivate () {
    ...

    # Unset My Server's variables
    unset MY_SERVER_NAME
    unset MY_DATABASE_URL
}

Then at the end of the activate script, set the variables:

# Set My Server's variables
export MY_SERVER_NAME="<domain for My Server>"
export MY_DATABASE_URL="<url for database>"

This way you don't have to install anything else to get it working, and you don't end up with the variables being left over when you deactivate the virtualenv.

I had a simular issue and resolved it using android:adjustViewBounds="true" on the ImageView.

<ImageView
    android:layout_width="fill_parent"
    android:layout_height="wrap_content"
    android:adjustViewBounds="true"
    android:contentDescription="@string/banner_alt"
    android:src="@drawable/banner_portrait" />

To answer your specific question, you cannot have two methods with the same name and the same arguments in a single class; using the HttpGet and HttpPost attributes doesn't distinguish the methods.

To address this, I'd typically include the view model for the form you're posting:

public class HomeController : Controller
{
    [HttpGet]
    public ActionResult Index()
    {
        Some Code--Some Code---Some Code
        return View();
    }

    [HttpPost]
    public ActionResult Index(formViewModel model)
    {
        do work on model --
        return View();
    }

}

using git rm -r --cached .idea in your terminal worked great for me. It disables the change tracking and unset a number of files under the rubymine folder (idea/) that I could then add and commit to git, thus removing the comparison and allowing the gitignore setting of .idea/ to work.

See the documentation on MDN about expressions and operators and statements.

Basic keywords and general expressions

this keyword:

• How does the "this" keyword work?

var x = function() vs. function x() — Function declaration syntax

• var functionName = function() {} vs function functionName() {}

(function(){…})() — IIFE (Immediately Invoked Function Expression)

• What is the purpose?, How is it called?
• Why does (function(){…})(); work but function(){…}(); doesn't?
• (function(){…})(); vs (function(){…}());
• shorter alternatives:
  • !function(){…}(); - What does the exclamation mark do before the function?
  • +function(){…}(); - JavaScript plus sign in front of function expression
  • !function(){ }() vs (function(){ })(), ! vs leading semicolon
• (function(window, undefined){…}(window));

someFunction()() — Functions which return other functions

• Two sets of parentheses after function call

=> — Equal sign, greater than: arrow function expression syntax

• What's the meaning of "=>" (an arrow formed from equals & greater than) in JavaScript?

|> — Pipe, greater than: Pipeline operator

• What does the "|>" operator do in Javascript?

function*, yield, yield* — Star after function or yield: generator functions

• What is "function*" in JavaScript?
• What's the yield keyword in JavaScript?
• Delegated yield (yield star, yield *) in generator functions

[], Array() — Square brackets: array notation

• What’s the difference between "Array()" and "[]" while declaring a JavaScript array?
• What is array literal notation in javascript and when should you use it?

If the square brackets appear on the left side of an assignment ([a] = ...), or inside a function's parameters, it's a destructuring assignment.

{key: value} — Curly brackets: object literal syntax (not to be confused with blocks)

• What do curly braces in JavaScript mean?
• Javascript object literal: what exactly is {a, b, c}?
• What do square brackets around a property name in an object literal mean?

If the curly brackets appear on the left side of an assignment ({ a } = ...) or inside a function's parameters, it's a destructuring assignment.

`…${…}…` — Backticks, dollar sign with curly brackets: template literals

• What does this `…${…}…` code from the node docs mean?
• Usage of the backtick character (`) in JavaScript?
• What is the purpose of template literals (backticks) following a function in ES6?

/…/ — Slashes: regular expression literals

• Meaning of javascript text between two slashes

$ — Dollar sign in regex replace patterns: $$, $&, $`, $', $n

• JavaScript replace() method dollar signs

() — Parentheses: grouping operator

• MDN: Grouping operator

Property-related expressions

obj.prop, obj[prop], obj["prop"] — Square brackets or dot: property accessors

• JavaScript property access: dot notation vs. brackets?

?., ?.[], ?.() — Question mark, dot: optional chaining operator

• Question mark after parameter
• Null-safe property access (and conditional assignment) in ES6/2015
• Optional Chaining in JavaScript
• Is there a null-coalescing (Elvis) operator or safe navigation operator in javascript?
• Is there a "null coalescing" operator in JavaScript?

:: — Double colon: bind operator

• JavaScript double colon (bind operator)

new operator

• What is the 'new' keyword in JavaScript?
• What is "new.target"?

...iter — Three dots: spread syntax; rest parameters

• (...args) => {} — What is the meaning of “…args” (three dots) in a function definition?
• [...iter] — javascript es6 array feature […data, 0] “spread operator”
• {...props} — Javascript Property with three dots (…)

Increment and decrement

++, -- — Double plus or minus: pre- / post-increment / -decrement operators

• ++someVariable vs someVariable++ in Javascript

Unary and binary (arithmetic, logical, bitwise) operators

delete operator

• What is the purpose of the delete operator in Javascript?

void operator

• What does `void 0` mean?

+, - — Plus and minus: addition or concatenation, and subtraction operators; unary sign operators

• What does = +_ mean in JavaScript, Single plus operator in javascript
• What's the significant use of unary plus and minus operators?
• Why is [1,2] + [3,4] = "1,23,4" in JavaScript?
• Why does JavaScript handle the plus and minus operators between strings and numbers differently?

|, &, ^, ~ — Single pipe, ampersand, circumflex, tilde: bitwise OR, AND, XOR, & NOT operators

• What do these JavaScript bitwise operators do?
• How to: The ~ operator?
• Is there a & logical operator in Javascript
• What does the "|" (single pipe) do in JavaScript?
• What does the operator |= do in JavaScript?
• What does the ^ (caret) symbol do in JavaScript?
• Using bitwise OR 0 to floor a number, How does x|0 floor the number in JavaScript?
• Why does ~1 equal -2?
• What does ~~ ("double tilde") do in Javascript?
• How does !!~ (not not tilde/bang bang tilde) alter the result of a 'contains/included' Array method call? (also here and here)

% — Percent sign: remainder operator

• What does % do in JavaScript?

&&, ||, ! — Double ampersand, double pipe, exclamation point: logical operators

• Logical operators in JavaScript — how do you use them?
• Logical operator || in javascript, 0 stands for Boolean false?
• What does "var FOO = FOO || {}" (assign a variable or an empty object to that variable) mean in Javascript?, JavaScript OR (||) variable assignment explanation, What does the construct x = x || y mean?
• Javascript AND operator within assignment
• What is "x && foo()"? (also here and here)
• What is the !! (not not) operator in JavaScript?
• What is an exclamation point in JavaScript?

?? — Double question mark: nullish-coalescing operator

• How is the nullish coalescing operator (??) different from the logical OR operator (||) in ECMAScript?
• Is there a null-coalescing (Elvis) operator or safe navigation operator in javascript?
• Is there a "null coalescing" operator in JavaScript?

** — Double star: power operator (exponentiation)

• x ** 2 is equivalent to Math.pow(x, 2)
• Is the double asterisk ** a valid JavaScript operator?
• MDN documentation

Equality operators

==, === — Equal signs: equality operators

• Which equals operator (== vs ===) should be used in JavaScript comparisons?
• How does JS type coercion work?
• In Javascript, <int-value> == "<int-value>" evaluates to true. Why is it so?
• [] == ![] evaluates to true
• Why does "undefined equals false" return false?
• Why does !new Boolean(false) equals false in JavaScript?
• Javascript 0 == '0'. Explain this example
• Why false == "false" is false?

!=, !== — Exclamation point and equal signs: inequality operators

• != vs. !==
• What is the difference between != and !== operators in JavaScript?

Bit shift operators

<<, >>, >>> — Two or three angle brackets: bit shift operators

• What do these JavaScript bitwise operators do?
• Double more-than symbol in JavaScript
• What is the JavaScript >>> operator and how do you use it?

Conditional operator

…?…:… — Question mark and colon: conditional (ternary) operator

• Question mark and colon in JavaScript
• Operator precedence with Javascript Ternary operator
• How do you use the ? : (conditional) operator in JavaScript?

Assignment operators

= — Equal sign: assignment operator

• In javascript == vs =?

%= — Percent equals: remainder assignment

• Having Confusion with Modulo operator

+= — Plus equals: addition assignment operator

• How does += (plus equal) work?

&&=, ||=, ??= — Double ampersand, pipe, or question mark, followed by equal sign: logical assignments

• Replace a value if null or undefined in JavaScript
• Set a variable if undefined
• Ruby’s ||= (or equals) in JavaScript?
• Original proposal
• Specification

Destructuring

• of function parameters: Where can I get info on the object parameter syntax for JavaScript functions?
• of arrays: Multiple assignment in javascript? What does [a,b,c] = [1, 2, 3]; mean?
• of objects/imports: Javascript object bracket notation ({ Navigation } =) on left side of assign

Comma operator

, — Comma operator

• What does a comma do in JavaScript expressions?
• Comma operator returns first value instead of second in argument list?
• When is the comma operator useful?

Control flow

{…} — Curly brackets: blocks (not to be confused with object literal syntax)

• JavaScript curly braces with no function or json

Declarations

var, let, const — Declaring variables

• What's the difference between using "let" and "var"?
• Are there constants in JavaScript?
• What is the temporal dead zone?

Label

label: — Colon: labels

• What does the JavaScript syntax foo: mean?
• What does ':' (colon) do in JavaScript?

# — Hash (number sign): Private methods or private fields

• What does the # symbol do in JavaScript?

Another approach is to use the . (dot) command in combination with I.

1. Move the cursor where you want to start
2. Press I
3. Type in the prefix you want (e.g. vendor_)
4. Press esc.
5. Press j to go down a line
6. Type . to repeat the last edit, automatically inserting the prefix again
7. Alternate quickly between j and .

I find this technique is often faster than the visual block mode for small numbers of additions and has the added benefit that if you don't need to insert the text on every single line in a range you can easily skip them by pressing extra j's.

Note that for large number of contiguous additions, the block approach or macro will likely be superior.

To check that the file you're trying to open actually exists, you can change directories in terminal using cd. To change to ~/Desktop/sass/css: cd ~/Desktop/sass/css. To see what files are in the directory: ls.

If you want information about either of those commands, use the man page: man cd or man ls, for example.

Google for "basic unix command line commands" or similar; that will give you numerous examples of moving around, viewing files, etc in the command line.

On Mac OS X, you can also use open to open a finder window: open . will open the current directory in finder. (open ~/Desktop/sass/css will open the ~/Desktop/sass/css).

try removing the padding/margins from the body tag.

body{
padding:0px;
margin:0px;
}

Checking the above suggestions on Windows 10 LTSB, and with a glimpse on the "help" outlines (that can be viewed when typing 'command /?' on the cmd), brought me to the conclusion that the PATH command changes the system environment variable Path values only for the current session, but after reboot all the values reset to their default- just as they were prior to using the PATH command.

On the other hand using the SETX command with administrative privileges is way more powerful. It changes those values for good (or at least until the next time this command is used or until next time those values are manually GUI manipulated... ).

The best SETX syntax usage that worked for me:

SETX PATH "%PATH%;C:\path\to\where\the\command\resides"

where any equal sign '=' should be avoided, and don't you worry about spaces! There isn't any need to insert any more quotation marks for a path that contains spaces inside it - the split sign ';' does the job.

The PATH keyword that follows the SETX defines which set of values should be changed among the System Environment Variables possible values, and the %PATH% (the word PATH surrounded by the percent sign) inside the quotation marks, tells the OS to leave the existing PATH values as they are and add the following path (the one that follows the split sign ';') to the existing values.

You need to aggregate the data first, this can be done using the GROUP BY clause:

SELECT Group, COUNT(*)
FROM table
GROUP BY Group
ORDER BY COUNT(*) DESC

The DESC keyword allows you to show the highest count first, ORDER BY by default orders in ascending order which would show the lowest count first.

Oh! just read comments in question, dear I missed it. but just letting the answer be here in case it can be useful to some other person

I tried "Ctrl+C" and "Ctrl+ Break" none worked. I was using SQL Plus that came with Oracle Client 10.2.0.1.0. SQL Plus is used by most as client for connecting with Oracle DB. I used the Cancel, option under File menu and it stopped the execution!

Once you click File wait for few mins then the select command halts and menu appears click on Cancel.

cityfile.txt

   public void getCityStateFromLocal() {
        AssetManager am = getAssets();
        InputStream inputStream = null;
        try {
            inputStream = am.open("city_state.txt");
        } catch (IOException e) {
            e.printStackTrace();
        }
        ObjectMapper mapper = new ObjectMapper();
        Map<String, String[]> map = new HashMap<String, String[]>();
        try {
            map = mapper.readValue(getStringFromInputStream(inputStream), new TypeReference<Map<String, String[]>>() {
            });
        } catch (IOException e) {
            e.printStackTrace();
        }
        ConstantValues.arrayListStateName.clear();
        ConstantValues.arrayListCityByState.clear();
        if (map.size() > 0)
        {
            for (Map.Entry<String, String[]> e : map.entrySet()) {
                CityByState cityByState = new CityByState();
                String key = e.getKey();
                String[] value = e.getValue();
                ArrayList<String> s = new ArrayList<String>(Arrays.asList(value));
                ConstantValues.arrayListStateName.add(key);
                s.add(0,"Select City");
                cityByState.addValue(s);
                ConstantValues.arrayListCityByState.add(cityByState);
            }
        }
        ConstantValues.arrayListStateName.add(0,"Select States");
    }
 // Convert InputStream to String
    public String getStringFromInputStream(InputStream is) {
        BufferedReader br = null;
        StringBuilder sb = new StringBuilder();
        String line;
        try {
            br = new BufferedReader(new InputStreamReader(is));
            while ((line = br.readLine()) != null) {
                sb.append(line);
            }
        } catch (IOException e) {
            e.printStackTrace();
        } finally {
            if (br != null) {
                try {
                    br.close();
                } catch (IOException e) {
                    e.printStackTrace();
                }
            }
        }

        return sb + "";

    }

If you have problems using the location: http://dl-ssl.google.com/android/eclipse/, try editing the location by replacing "http" with "https" or the other way round.

This is a textbook case for a constructor function:

var myArray = [];

function myElement(id, value){
    this.id = id
    this.value = value
}

myArray[0] = new myElement(0,1)
myArray[1] = new myElement(2,3)
// or myArray.push(new myElement(1, 1))

How floats work

When floating elements exist on the page, non-floating elements wrap around the floating elements, similar to how text goes around a picture in a newspaper. From a document perspective (the original purpose of HTML), this is how floats work.

float vs display:inline

Before the invention of display:inline-block, websites use float to set elements beside each other. float is preferred over display:inline since with the latter, you can't set the element's dimensions (width and height) as well as vertical paddings (top and bottom) - which floated elements can do since they're treated as block elements.

Float problems

The main problem is that we're using float against its intended purpose.

Another is that while float allows side-by-side block-level elements, floats do not impart shape to its container. It's like position:absolute, where the element is "taken out of the layout". For instance, when an empty container contains a floating 100px x 100px <div>, the <div> will not impart 100px in height to the container.

Unlike position:absolute, it affects the content that surrounds it. Content after the floated element will "wrap" around the element. It starts by rendering beside it and then below it, like how newspaper text would flow around an image.

Clearfix to the rescue

What clearfix does is to force content after the floats or the container containing the floats to render below it. There are a lot of versions for clear-fix, but it got its name from the version that's commonly being used - the one that uses the CSS property clear.

Examples

Here are several ways to do clearfix , depending on the browser and use case. One only needs to know how to use the clear property in CSS and how floats render in each browser in order to achieve a perfect cross-browser clear-fix.

What you have

Your provided style is a form of clearfix with backwards compatibility. I found an article about this clearfix. It turns out, it's an OLD clearfix - still catering the old browsers. There is a newer, cleaner version of it in the article also. Here's the breakdown:

• The first clearfix you have appends an invisible pseudo-element, which is styled clear:both, between the target element and the next element. This forces the pseudo-element to render below the target, and the next element below the pseudo-element.

• The second one appends the style display:inline-block which is not supported by earlier browsers. inline-block is like inline but gives you some properties that block elements, like width, height as well as vertical padding. This was targeted for IE-MAC.

• This was the reapplication of display:block due to IE-MAC rule above. This rule was "hidden" from IE-MAC.

All in all, these 3 rules keep the .clearfix working cross-browser, with old browsers in mind.

Simply set location relative to null after calling pack on the JFrame, that's it.

e.g.,

  JFrame frame = new JFrame("FooRendererTest");
  frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
  frame.getContentPane().add(mainPanel); // or whatever...
  frame.pack();
  frame.setLocationRelativeTo(null);  // *** this will center your app ***
  frame.setVisible(true);

If you want to find one element or None use default in next, it won't raise StopIteration if the item was not found in the list:

first_or_default = next((x for x in lst if ...), None)

You might also want to check for Heroku telling you there's a typo in your CSS file.

Read through the long boring messages in the terminal closely after you push. There may be something like this: Invalid CSS after. It means Heroku has found a typo and you need to fix it in the CSS file.

You can do a find for rake aborted! and directly after that it should say why the push failed.

You can get it like this also.

filepath = os.path.abspath(f.name)

Original from Sept. 13, 2015:
Quick and easy.

$.each(yourArray, function(index, value){
    $('.element').html( $('.element').html() + '<span>' + value +'</span>')
});

Update Sept 9, 2019: No jQuery is needed to iterate the array.

yourArray.forEach((value) => {
    $(".element").html(`${$(".element").html()}<span>${value}</span>`);
});

/* --- Or without jQuery at all --- */

yourArray.forEach((value) => {
    document.querySelector(".element").innerHTML += `<span>${value}</span>`;
});

Most answers suggest to just add ServerName localhost to /etc/apache2/apache2.conf.

But quoting Apache documentation :

The presence of this error message also indicates that Apache httpd was unable to obtain a fully-qualified hostname by doing a reverse lookup on your server's IP address. While the above instructions will get rid of the warning in any case, it is also a good idea to fix your name resolution so that this reverse mapping works.

Therefore adding such a line to /etc/hosts is probably a more robust solution :

192.0.2.0  foobar.example.com  foobar

where 192.0.2.0 is the static IP address of the server named foobar within the example.com domain.

One can check the FQDN e.g. with

hostname -A

(shortcut for hostname --all-fqdn).

You can try the following code snippet

httpResponseMessage.Content.Headers.Add("Content-Type", "application/octet-stream");

Hope it will work for you.

If you're looking to store the current time just use MYSQL's functions.

mysql_query("INSERT INTO `table` (`dateposted`) VALUES (now())");

If you need to use PHP to do it, the format it Y-m-d H:i:s so try

$date = date('Y-m-d H:i:s');
mysql_query("INSERT INTO `table` (`dateposted`) VALUES ('$date')");

In mechanical terms a COMMIT makes a transaction. That is, a transaction is all the activity (one or more DML statements) which occurs between two COMMIT statements (or ROLLBACK).

In Oracle a DDL statement is a transaction in its own right simply because an implicit COMMIT is issued before the statement is executed and again afterwards. TRUNCATE is a DDL command so it doesn't need an explicit commit because calling it executes an implicit commit.

From a system design perspective a transaction is a business unit of work. It might consist of a single DML statement or several of them. It doesn't matter: only full transactions require COMMIT. It literally does not make sense to issue a COMMIT unless or until we have completed a whole business unit of work.

This is a key concept. COMMITs don't just release locks. In Oracle they also release latches, such as the Interested Transaction List. This has an impact because of Oracle's read consistency model. Exceptions such as ORA-01555: SNAPSHOT TOO OLD or ORA-01002: FETCH OUT OF SEQUENCE occur because of inappropriate commits. Consequently, it is crucial for our transactions to hang onto locks for as long as they need them.

Changed in Chrome 32 35+

(In Chrome 35+ the "Emulation" tab is present by default. Also, the console is available from any primary tab.)

1. In DevTools, go to settings-> Overrides
2. enable "Show Emulation view in console drawer"
3. Close settings, go to 'Elements' tab
4. Hit Esc to bring up console
5. Choose tab "Emulation", click "Screen"
6. Scroll down to "CSS Media", select "print"

This option is not (yet?) available in the console tab.

Two things to keep in mind Content-Type and the Encoding

1) What if the file is css

if (/.(css)$/.test(path)) {
  res.writeHead(200, {'Content-Type': 'text/css'}); 
  res.write(data, 'utf8');
} 

2) What if the file is jpg/png

if (/.(jpg)$/.test(path)) {
  res.writeHead(200, {'Content-Type': 'image/jpg'});
  res.end(data,'Base64');
}

Above one is just a sample code to explain the answer and not the exact code pattern.

I've been able to accomplish this, even in many odd situations, by using Rails' built-in Arel.

User.where(
  User.arel_table[:first_name].eq('Tobias').or(
    User.arel_table[:last_name].eq('Fünke')
  )
)

This merges both ActiveRecord relations by using Arel's or.

Merge, as was suggested here, didn't work for me. It dropped the 2nd set of relation objects from the results.

A simple rewrite of @Landons MY_Loader, to include multiple files for the body, e.i. page unique sidebars...

<?php

class MY_Loader extends CI_Loader {
    public function template($template_name, $vars = array(), $return = FALSE)
    {
        $content  = $this->view('frontend/templates/header', $vars, $return);

        if(is_array($template_name)) { //return all values in contents

            foreach($template_name as $file_to_load) { 
                  $content .= $this->view('frontend/'.$file_to_load, $vars, $return);
            }
        }
        else {             
            $content .= $this->view('frontend/'.$template_name, $vars, $return);
        }

        $content .= $this->view('frontend/templates/footer', $vars, $return);

        if ($return)
        {
            return $content;
        }
    }
}

This works both ways...

Including one file to template:

$data['moo'] = 'my data'];
$this->load->template('home', $data);

Include multiple files to template:

$data['catalog'] = 'catalog load 1';
$data['sidebar'] = 'sidebar load 2';           
$load = array('catalog/catalog', 'catalog/sidebar');        
$this->load->template($load, $data);

Not 100% what you were looking for, but kind of an inside-out way of doing it:

SQL> CREATE TABLE mytable (id NUMBER, status VARCHAR2(50));

Table created.

SQL> INSERT INTO mytable VALUES (1,'Finished except pouring water on witch');

1 row created.

SQL> INSERT INTO mytable VALUES (2,'Finished except clicking ruby-slipper heels');

1 row created.

SQL> INSERT INTO mytable VALUES (3,'You shall (not?) pass');

1 row created.

SQL> INSERT INTO mytable VALUES (4,'Done');

1 row created.

SQL> INSERT INTO mytable VALUES (5,'Done with it.');

1 row created.

SQL> INSERT INTO mytable VALUES (6,'In Progress');

1 row created.

SQL> INSERT INTO mytable VALUES (7,'In progress, OK?');

1 row created.

SQL> INSERT INTO mytable VALUES (8,'In Progress Check Back In Three Days'' Time');

1 row created.

SQL> SELECT *
  2  FROM   mytable m
  3  WHERE  +1 NOT IN (INSTR(m.status,'Done')
  4            ,       INSTR(m.status,'Finished except')
  5            ,       INSTR(m.status,'In Progress'));

        ID STATUS
---------- --------------------------------------------------
         3 You shall (not?) pass
         7 In progress, OK?

SQL>

Try calling it like: obj.some_function( '1', 2, '3', g="foo", h="bar" ). After the required positional arguments, you can specify specific optional arguments by name.

Edge (as opposed to IE11) has a better UI for Local storage / Session storage and cookies:

• Open Dev tools (F12)
• Go to Debugger tab
• Click the folder icon to show a list of resources - opens in a separate tab

If you want to make sure the HTML file doesn't contain any PHP code and will not be executed as PHP, do not use include or require. Simply do:

echo file_get_contents("/path/to/file.html");

Based on this fiddle: http://jsfiddle.net/dh834zgw/1/

the following snippet (using jquery) will disable the window scroll:

 var curScrollTop = $(window).scrollTop();
 $('html').toggleClass('noscroll').css('top', '-' + curScrollTop + 'px');

And in your css:

html.noscroll{
    position: fixed;
    width: 100%;
    top:0;
    left: 0;
    height: 100%;
    overflow-y: scroll !important;
    z-index: 10;
 }

Now when you remove the modal, don't forget to remove the noscroll class on the html tag:

$('html').toggleClass('noscroll');

I faced the same problem in Derby IBM DB2 embedded database in a java desktop application, and after a day of searching I finally found how it's done :

SELECT days (table1.datecolomn) - days (current date) FROM table1 WHERE days (table1.datecolomn) - days (current date) > 5

for more information check this site

Here is what you should do in the CSS style, on the main div

display: block;
overflow: auto;

And do not touch height

That's not possible. localhost always defaults to the loopback device on the local operating system.
As your virtual machine runs its own operating system it has its own loopback device which you cannot access from the outside.

If you want to access it e.g. in a browser, connect to it using the local IP instead:

http://192.168.180.1:8000

This is just an example of course, you can find out the actual IP by issuing an ifconfig command on a shell in the guest operating system.

git fetch

git branch -r

git checkout <branch_name>

myFile = open('today','r')

ips = {}

for line in myFile:
    parts = line.split()
    if parts[1] == 'Failure':
        ips.setdefault(parts[0], 0)
        ips[parts[0]] += 1

of = open('failed.py', 'w')
for ip in [k for k, v in ips.iteritems() if v >=5]:
    of.write(k+'\n')

Check out setdefault, it makes the code a little more legible. Then you dump your data with the file object's write method.

Python actually makes this quite easy.

Something like

for i in range(10):
    print '%-12i%-12i' % (10 ** i, 20 ** i)

will have the output

1           1           
10          20          
100         400         
1000        8000        
10000       160000      
100000      3200000     
1000000     64000000    
10000000    1280000000  
100000000   25600000000
1000000000  512000000000

The % within the string is essentially an escape character and the characters following it tell python what kind of format the data should have. The % outside and after the string is telling python that you intend to use the previous string as the format string and that the following data should be put into the format specified.

In this case I used "%-12i" twice. To break down each part:

'-' (left align)
'12' (how much space to be given to this part of the output)
'i' (we are printing an integer)

From the docs: https://docs.python.org/2/library/stdtypes.html#string-formatting

I've implemented a version where it basically finds all possible paths from one node to the other, but it doesn't count any possible 'cycles' (the graph I'm using is cyclical). So basically, no one node will appear twice within the same path. And if the graph were acyclical, then I suppose you could say it seems to find all the possible paths between the two nodes. It seems to be working just fine, and for my graph size of ~150, it runs almost instantly on my machine, though I'm sure the running time must be something like exponential and so it'll start to get slow quickly as the graph gets bigger.

Here is some Java code that demonstrates what I'd implemented. I'm sure there must be more efficient or elegant ways to do it as well.

Stack connectionPath = new Stack();
List<Stack> connectionPaths = new ArrayList<>();
// Push to connectionsPath the object that would be passed as the parameter 'node' into the method below
void findAllPaths(Object node, Object targetNode) {
    for (Object nextNode : nextNodes(node)) {
       if (nextNode.equals(targetNode)) {
           Stack temp = new Stack();
           for (Object node1 : connectionPath)
               temp.add(node1);
           connectionPaths.add(temp);
       } else if (!connectionPath.contains(nextNode)) {
           connectionPath.push(nextNode);
           findAllPaths(nextNode, targetNode);
           connectionPath.pop();
        }
    }
}

Are you trying to pass the command line arguments to the program AS you launch it? I am working on something right now that does exactly this, and it was a lot simpler than I thought. If I go into the command line, and type

C:\folder\app.exe/xC:\folder\file.txt

then my application launches, and creates a file in the specified directory with the specified name.

I wanted to do this through a Powershell script on a remote machine, and figured out that all I needed to do was put

$s = New-PSSession -computername NAME -credential LOGIN
    Invoke-Command -session $s -scriptblock {C:\folder\app.exe /xC:\folder\file.txt}
Remove-PSSession $s

(I have a bunch more similar commands inside the session, this is just the minimum it requires to run) notice the space between the executable, and the command line arguments. It works for me, but I am not sure exactly how your application works, or if that is even how you pass arguments to it.

*I can also have my application push the file back to my own local computer by changing the script-block to

C:\folder\app.exe /x"\\LocalPC\DATA (C)\localfolder\localfile.txt"

You need the quotes if your file-path has a space in it.

EDIT: actually, this brought up some silly problems with Powershell launching the application as a service or something, so I did some searching, and figured out that you can call CMD to execute commands for you on the remote computer. This way, the command is carried out EXACTLY as if you had just typed it into a CMD window on the remote machine. Put the command in the scriptblock into double quotes, and then put a cmd.exe /C before it. like this:

cmd.exe /C "C:\folder\app.exe/xC:\folder\file.txt"

this solved all of the problems that I have been having recently.

EDIT EDIT: Had more problems, and found a much better way to do it.

start-process -filepath C:\folder\app.exe -argumentlist "/xC:\folder\file.txt"

and this doesn't hang up your terminal window waiting for the remote process to end. Just make sure you have a way to terminate the process if it doesn't do that on it's own. (mine doesn't, required the coding of another argument)

How I did it with a pivot in dynamic sql (#AccPurch was created prior to this)

DECLARE @sql AS nvarchar(MAX)
declare @Month Nvarchar(1000)

--DROP TABLE #temp
select distinct YYYYMM into #temp from #AccPurch AS ap
SELECT  @Month = COALESCE(@Month, '') + '[' + CAST(YYYYMM AS VarChar(8)) + '],' FROM    #temp

SELECT   @Month= LEFT(@Month,len(@Month)-1)


SET @sql = N'SELECT UserID, '+ @Month + N' into ##final_Donovan_12345 FROM (
Select ap.AccPurch ,
       ap.YYYYMM ,
       ap.UserID ,
       ap.AccountNumber
FROM #AccPurch AS ap 
) p
Pivot (SUM(AccPurch) FOR YYYYMM IN ('+@Month+ N')) as pvt'


EXEC sp_executesql @sql

Select * INTO #final From ##final_Donovan_12345

DROP TABLE  ##final_Donovan_12345

Select * From #final AS f

Digest Authentication communicates credentials in an encrypted form by applying a hash function to: the username, the password, a server supplied nonce value, the HTTP method and the requested URI.

Whereas Basic Authentication uses non-encrypted base64 encoding.

Therefore, Basic Authentication should generally only be used where transport layer security is provided such as https.

See RFC-2617 for all the gory details.

This link: Creating the Sample Database in Oracle 11g Release 2 is a good example of creating a sample database.

This link: Newbie Guide to Oracle 11g Database Common Problems should help you if you come across some common problems creating your database.

Best of luck!

EDIT: As you are using XE, you should have a DB already created, to connect using SQL*Plus and SQL Developer etc. the info is here: Connecting to Oracle Database Express Edition and Exploring It.

Extract:

Connecting to Oracle Database XE from SQL Developer SQL Developer is a client program with which you can access Oracle Database XE. With Oracle Database XE 11g Release 2 (11.2), you must use SQL Developer version 3.0. This section assumes that SQL Developer is installed on your system, and shows how to start it and connect to Oracle Database XE. If SQL Developer is not installed on your system, see Oracle Database SQL Developer User's Guide for installation instructions.

Note:

For the following procedure: The first time you start SQL Developer on your system, you must provide the full path to java.exe in step 1.

For step 4, you need a user name and password.

For step 6, you need a host name and port.

To connect to Oracle Database XE from SQL Developer:

Start SQL Developer.

For instructions, see Oracle Database SQL Developer User's Guide.

If this is the first time you have started SQL Developer on your system, you are prompted to enter the full path to java.exe (for example, C:\jdk1.5.0\bin\java.exe). Either type the full path after the prompt or browse to it, and then press the key Enter.

The Oracle SQL Developer window opens.

In the navigation frame of the window, click Connections.

The Connections pane appears.

In the Connections pane, click the icon New Connection.

The New/Select Database Connection window opens.

In the New/Select Database Connection window, type the appropriate values in the fields Connection Name, Username, and Password.

For security, the password characters that you type appear as asterisks.

Near the Password field is the check box Save Password. By default, it is deselected. Oracle recommends accepting the default.

In the New/Select Database Connection window, click the tab Oracle.

The Oracle pane appears.

In the Oracle pane:

For Connection Type, accept the default (Basic).

For Role, accept the default.

In the fields Hostname and Port, either accept the defaults or type the appropriate values.

Select the option SID.

In the SID field, type accept the default (xe).

In the New/Select Database Connection window, click the button Test.

The connection is tested. If the connection succeeds, the Status indicator changes from blank to Success.

Description of the illustration success.gif

If the test succeeded, click the button Connect.

The New/Select Database Connection window closes. The Connections pane shows the connection whose name you entered in the Connection Name field in step 4.

You are in the SQL Developer environment.

To exit SQL Developer, select Exit from the File menu.

Approaches 1 and 2 obviously don't work, because you get java.sql.Date objects, per JPA/Hibernate spec, and not java.util.Date. From approaches 3 and 4, I would rather choose the latter one, because it's more declarative, and will work with both field and getter annotations.

You have already laid out the solution 4 in your referenced blog post, as @tscho was kind to point out. Maybe defaultForType (see below) should give you the centralized solution you were looking for. Of course will will still need to differentiate between date (without time) and timestamp fields.

For future reference I will leave the summary of using your own Hibernate UserType here:

To make Hibernate give you java.util.Date instances, you can use the @Type and @TypeDef annotations to define a different mapping of your java.util.Date java types to and from the database.

See the examples in the core reference manual here.

1. Implement a UserType to do the actual plumbing (conversion to/from java.util.Date), named e.g. TimestampAsJavaUtilDateType

2. Add a @TypeDef annotation on one entity or in a package-info.java - both will be available globally for the session factory (see manual link above). You can use defaultForType to apply the type conversion on all mapped fields of type java.util.Date.

   @TypeDef
     name = "timestampAsJavaUtilDate",
     defaultForType = java.util.Date.class, /* applied globally */
     typeClass = TimestampAsJavaUtilDateType.class
   )
   

3. Optionally, instead of defaultForType, you can annotate your fields/getters with @Type individually:

   @Entity
   public class MyEntity {
      [...]
      @Type(type="timestampAsJavaUtilDate")
      private java.util.Date myDate;
      [...]
   }
   

P.S. To suggest a totally different approach: we usually just don't compare Date objects using equals() anyway. Instead we use a utility class with methods to compare e.g. only the calendar date of two Date instances (or another resolution such as seconds), regardless of the exact implementation type. That as worked well for us.

If you want to add a line at the beginning of a file, you need to add \n at the end of the string in the best solution above.

The best solution will add the string, but with the string, it will not add a line at the end of a file.

sed -i '1s/^/your text\n/' file

If you want to use a function form a package or module in python you have to import and reference them. For example normally you do the following to draw 5 points( [1,5],[2,4],[3,3],[4,2],[5,1]) in the space:

import matplotlib.pyplot
matplotlib.pyplot.plot([1,2,3,4,5],[5,4,3,2,1],"bx")
matplotlib.pyplot.show()

In your solution

from matplotlib import*

This imports the package matplotlib and "plot is not defined" means there is no plot function in matplotlib you can access directly, but instead if you import as

from matplotlib.pyplot import *
plot([1,2,3,4,5],[5,4,3,2,1],"bx")
show()

Now you can use any function in matplotlib.pyplot without referencing them with matplotlib.pyplot.

I would recommend you to name imports you have, in this case you can prevent disambiguation and future problems with the same function names. The last and clean version of above example looks like:

import matplotlib.pyplot as plt
plt.plot([1,2,3,4,5],[5,4,3,2,1],"bx")
plt.show()

Simply put:

SELECT * 
FROM TABLE_NAME
WHERE
dob > '1/21/2012'

Where 1/21/2012 is the date and you want all data, including that date.

SELECT * 
FROM TABLE_NAME
WHERE
dob BETWEEN '1/21/2012' AND '2/22/2012'

Use a between if you're selecting time between two dates

open(filename,'r')   #2nd argument is r and not w

will open the file or give an error if it doesn't exist. If there's an error, then you can try to write to the path, if you can't then you get a second error

try:
    open(filename,'r')
    return True
except IOError:
    try:
        open(filename, 'w')
        return True
    except IOError:
        return False

Also have a look here about permissions on windows

Regex to find trailing and leading whitespaces:

^[ \t]+|[ \t]+$

The easiest is to convert your data to a "tall" format.

s <- 
"A       B        C       G       Xax
0.451   0.333   0.034   0.173   0.22        
0.491   0.270   0.033   0.207   0.34    
0.389   0.249   0.084   0.271   0.54    
0.425   0.819   0.077   0.281   0.34
0.457   0.429   0.053   0.386   0.53    
0.436   0.524   0.049   0.249   0.12    
0.423   0.270   0.093   0.279   0.61    
0.463   0.315   0.019   0.204   0.23
"
d <- read.delim(textConnection(s), sep="")

library(ggplot2)
library(reshape2)
d <- melt(d, id.vars="Xax")

# Everything on the same plot
ggplot(d, aes(Xax,value, col=variable)) + 
  geom_point() + 
  stat_smooth() 

# Separate plots
ggplot(d, aes(Xax,value)) + 
  geom_point() + 
  stat_smooth() +
  facet_wrap(~variable)

If a <script> has a src then the text content of the element will be not be executed as JS (although it will appear in the DOM).

You need to use multiple script elements.

1. a <script> to load the external script

2. a <script> to hold your inline code (with the call to the function in the external script)

   scroll_messages();