SyntaxFix.com - Programming Questions & Answers Hub For Beginners

implementation 'com.github.bumptech.glide:glide:4.8.0'
annotationProcessor 'com.github.bumptech.glide:compiler:4.8.0'


RequestOptions options=new RequestOptions();
        options.centerCrop().placeholder(getResources().getDrawable(R.drawable.user_placeholder));
        Glide.with(this)
                .load(preferenceSingleTon.getImage())
                .apply(options)
                .into(ProfileImage);

You can simply use:

mvn --settings YourOwnSettings.xml clean install

or

mvn -s YourOwnSettings.xml clean install

I believe this is caused by HSTS - see http://en.wikipedia.org/wiki/HTTP_Strict_Transport_Security

If you have (developed) any other localhost sites which send a HSTS header...

eg. Strict-Transport-Security: max-age=31536000; includeSubDomains; preload

...then depending on the value of max-age, future requests to localhost will be required to be served over HTTPS.

To get around this, I did the following.

• In the Chrome address bar type "chrome://net-internals/#hsts"
• At the very bottom of a page is QUERY domain textbox - verify that localhost is known to the browser. If it says "Not found" then this is not the answer you are looking for.
• If it is, DELETE the localhost domain using the textbox above
• Your site should now work using plain old HTTP

This is not a permanent solution, but will at least get it working between projects. If anyone knows how to permanently exclude localhost from the HSTS list please let me know :)

UPDATE - November 2017

Chrome has recently moved this setting to sit under Delete domain security policies

UPDATE - December 2017 If you are using .dev domain see other answers below as Chrome (and others) force HTTPS via preloaded HSTS.

Yes, you can use the native javascript Date() object and its methods.

For instance you can create a function like:

function formatDate(date) {
  var hours = date.getHours();
  var minutes = date.getMinutes();
  var ampm = hours >= 12 ? 'pm' : 'am';
  hours = hours % 12;
  hours = hours ? hours : 12; // the hour '0' should be '12'
  minutes = minutes < 10 ? '0'+minutes : minutes;
  var strTime = hours + ':' + minutes + ' ' + ampm;
  return (date.getMonth()+1) + "/" + date.getDate() + "/" + date.getFullYear() + "  " + strTime;
}

var d = new Date();
var e = formatDate(d);

alert(e);

And display also the am / pm and the correct time.

Remember to use getFullYear() method and not getYear() because it has been deprecated.

DEMO http://jsfiddle.net/a_incarnati/kqo10jLb/4/

Non-Americans take note! If you use Excel with "." as 1000 separator, you need to replace the "," with a "." in the formula, such as:

[>=1000]€ #.##0." K";[<=-1000]-€ #.##0." K";0

The code above will display € 62.123 as "€ 62 K".

I agree with Elisey. I got this same error after opening my project in the 2.4 preview and then opening the same project in android studio 2.3

Fixed the issue by changing this line in build.gradle from

classpath 'com.android.tools.build:gradle:2.4.0-alpha5'

to

classpath 'com.android.tools.build:gradle:2.3.1'

You must have to define no-args or default constructor if you are creating your own constructor.

You can read why default or no argument constructor is required.

why-default-or-no-argument-constructor-java-class.html

The problem is that, even though your phone is rooted, the 'adbd' server on the phone does not use root permissions. You can try to bypass these checks or install a different adbd on your phone or install a custom kernel/distribution that includes a patched adbd.

Or, a much easier solution is to use 'adbd insecure' from chainfire which will patch your adbd on the fly. It's not permanent, so you have to run it before starting up the adb server (or else set it to run every boot). You can get the app from the google play store for a couple bucks:

https://play.google.com/store/apps/details?id=eu.chainfire.adbd&hl=en

Or you can get it for free, the author has posted a free version on xda-developers:

http://forum.xda-developers.com/showthread.php?t=1687590

Install it to your device (copy it to the device and open the apk file with a file manager), run adb insecure on the device, and finally kill the adb server on your computer:

% adb kill-server

And then restart the server and it should already be root.

If you just want see the output of the process running from within the container, you can do a simple docker container logs -f <container id>.

The -f flag makes it so that the output of the container is followed and updated in real-time. Very useful for debugging or monitoring.

On my Mobo (ASRock A320M-HD with Ryzen 3 2200G) I have to:

SR-IOV support: enabled
IOMMU: enabled
SVM: enabled

On the OS enable Hyper V.

File->Project Structure->Project pane->"Android plugin version".

Make sure you don't confuse the Gradle version with the Android plugin version. The former is the build system itself, the latter is the plugin to the build system that knows how to build Android projects

Use a border-radius property of 50%.

So for example:

.example-div {

    border-radius: 50%

}

Another way of getting the first row and preserving the index:

x = df.first('d') # Returns the first day. '3d' gives first three days.

At the beginning of your loading script, just make your

visible through css [display:block;] and make the rest of the page invisible through css[display:none;].

Once the loading is done, just make the loading invisible and the page visible again with the same technique. You can use the document.getElementById() to select the divs you want to change the display.

Edit: Here's what it would sort of look like. When the body finishes loading, it will call the javascript function that will change the display values of the different elements. By default, your style would be to have the page not visible the loading visible.

<head>
    <style>
        #page{
            display: none;
        }
        #loading{
            display: block;
        }
    </style>
    <script>
        function myFunction()
        {
            document.getElementById("page").style.display = "block";
            document.getElementById("loading").style.display = "none";
        }
    </script>
</head>

<body onload="myFunction()">
    <div id="page">

    </div>
    <div id="loading">

    </div>
</body>

You can maybe do something like this with awk

awk '{outfile=sprintf("file%02d.txt",NR/5000+1);print > outfile}' yourfile

Basically, it calculates the name of the output file by taking the record number (NR) and dividing it by 5000, adding 1, taking the integer of that and zero-padding to 2 places.

By default, awk prints the entire input record when you don't specify anything else. So, print > outfile writes the entire input record to the output file.

As you are running on Windows, you can't use single quotes because it doesn't like that. I think you have to put the script in a file and then tell awkto use the file, something like this:

awk -f script.awk yourfile

and script.awk will contain the script like this:

{outfile=sprintf("file%02d.txt",NR/5000+1);print > outfile}

Or, it may work if you do this:

awk "{outfile=sprintf(\"file%02d.txt\",NR/5000+1);print > outfile}" yourfile

I've added some cocoapods magic to jjrscott's answer in case you need to use CommonCrypto in your cocoapods library.

1) Add this line to your podspec:

s.script_phase = { :name => 'CommonCrypto', :script => 'sh $PROJECT_DIR/../../install_common_crypto.sh', :execution_position => :before_compile }

2) Save this in your library folder or wherever you like (however don't forget to change the script_phase accordingly ...)

# This if-statement means we'll only run the main script if the
# CommonCrypto.framework directory doesn't exist because otherwise
# the rest of the script causes a full recompile for anything
# where CommonCrypto is a dependency
# Do a "Clean Build Folder" to remove this directory and trigger
# the rest of the script to run
FRAMEWORK_DIR="${BUILT_PRODUCTS_DIR}/CommonCrypto.framework"

if [ -d "${FRAMEWORK_DIR}" ]; then
echo "${FRAMEWORK_DIR} already exists, so skipping the rest of the script."
exit 0
fi

mkdir -p "${FRAMEWORK_DIR}/Modules"
echo "module CommonCrypto [system] {
    header "${SDKROOT}/usr/include/CommonCrypto/CommonCrypto.h"
    export *
}" >> "${FRAMEWORK_DIR}/Modules/module.modulemap"

ln -sf "${SDKROOT}/usr/include/CommonCrypto" "${FRAMEWORK_DIR}/Headers"

Works like a charm :)

I had been debugging this problem forever - 3 hours 17 mins. What particularly annoyed me was that I already had sql installed on my system through prior uni work but pip/pip3 wasn't recognising it. These threads above and many other I scoured the internet for were helpful in eluminating the problem but didn't actually solve things.

ANSWER

Pip is looking for mysql binaries in the Homebrew Directory which is located relative to Macintosh HD @

/usr/local/Cellar/

so I found that this requires you making a few changes

step 1: Download MySql if not already done so https://dev.mysql.com/downloads/

Step 2: Locate it relative to Macintosh HD and cd

/usr/local/mysql/bin

Step 3: Once there open terminal and use a text editor of choice - I'm a neovim guy myself so I typed (doesn't automatically come with Mac... another story for another day)

nvim mysql_config

Step 4: You will see at approx line 112

# Create options 
libs="-L$pkglibdir"
libs="$libs -l "

Change to

# Create options 
libs="-L$pkglibdir"
libs="$libs -lmysqlclient -lssl -lcrypto"

*you'll notice that this file has read-only access so if your using vim or neovim

:w !sudo tee %

Step 5: Head to the home directory and edit the .bash_profile file

cd ~

Then

nvim .bash_profile

and add

export PATH="/usr/local/mysql/bin:$PATH"

to the file then save

Step 6: relative to Macintosh HD locate paths and add to it

cd /private/etc/

then

nvim paths

and add

/usr/local/mysql/bin

*you'll again notice that this file has read-only access so if your using vim or neovim

:w !sudo tee % 

then

cd ~

then refresh the terminal with your changes by running

source .bash_profile

Finally

pip3 install mysqlclient

And Viola. Remember it's a vibe.

I had a duplicate directory (~web/web) and it removed the nested duplicate when I ran rm -rf web while inside the first web folder.

For swift 3 and XCode 8 I find this answer:

• First, you need set privacy into info.plist. Insert string NSLocationWhenInUseUsageDescription with your description why you want get user location. For example, set string "For map in application".

• Second, use this code example

  @IBOutlet weak var mapView: MKMapView!
  
  private var locationManager: CLLocationManager!
  private var currentLocation: CLLocation?
  
  override func viewDidLoad() {
      super.viewDidLoad()
  
      mapView.delegate = self
  
      locationManager = CLLocationManager()
      locationManager.delegate = self
      locationManager.desiredAccuracy = kCLLocationAccuracyBest
  
      // Check for Location Services
  
      if CLLocationManager.locationServicesEnabled() {
          locationManager.requestWhenInUseAuthorization()
          locationManager.startUpdatingLocation()
      }
  }
  
  // MARK - CLLocationManagerDelegate
  
  func locationManager(_ manager: CLLocationManager, didUpdateLocations locations: [CLLocation]) {
      defer { currentLocation = locations.last }
  
      if currentLocation == nil {
          // Zoom to user location
          if let userLocation = locations.last {
              let viewRegion = MKCoordinateRegionMakeWithDistance(userLocation.coordinate, 2000, 2000)
              mapView.setRegion(viewRegion, animated: false)
          }
      }
  }
  

• Third, set User Location flag in storyboard for mapView.

In my case it was a failed import to eclipse. I had to delete the project from eclipse (without deleting form the filesystem of course) and reimport it. After that the error was gone immediately.

Try to not use setInterval.
You can resend request to server after successful response with timeout.
jQuery:

sendRequest(); //call function

function sendRequest(){
    $.ajax({
        url: "test.php",
        success: 
        function(result){
            $('#links').text(result); //insert text of test.php into your div
            setTimeout(function(){
                sendRequest(); //this will send request again and again;
            }, 5000);
        }
    });
}

Basically, since Python 3.x you need to use print with parenthesis.

Python 2.x: print "Lord of the Rings"

Python 3.x: print("Lord of the Rings")

Explaination

print was a statement in 2.x, but it's a function in 3.x. Now, there are a number of good reasons for this.

1. With function format of Python 3.x, more flexibility comes when printing multiple items with comman separated.
2. You can't use argument splatting with a statement. In 3.x if you have a list of items that you want to print with a separator, you can do this:

>>> items = ['foo', 'bar', 'baz']
>>> print(*items, sep='+') 
foo+bar+baz

3. You can't override a statement. If you want to change the behavior of print, you can do that when it's a function but not when it's a statement.

The accepted answer is great. This is not answer, but just an illustration of the issue.

I present a viewController like this:

inside vc1:

func showVC2() {
    if let navController = self.navigationController{
        navController.present(vc2, animated: true)
    }
}

inside vc2:

func returnFromVC2() {
    if let navController = self.navigationController {
        navController.popViewController(animated: true)
    }else{
        print("navigationController is nil") <-- I was reaching here!
    }
}

As 'stefandouganhyde' has said: "it is not contained by your UINavigationController or any other"

new solution:

func returnFromVC2() {
    dismiss(animated: true, completion: nil)
}

Here are slightly different options to accomplish the task at hand.

using toMap:

list.stream()
    .collect(Collectors.toMap(Function.identity(), e -> 1, Math::addExact));

using Map::merge:

Map<String, Integer> accumulator = new HashMap<>();
list.forEach(s -> accumulator.merge(s, 1, Math::addExact));

for /f "delims=" %%i in ("%0") do set "curpath=%%~dpi"
echo "%curpath%"

or

echo "%cd%"

The double quotes are needed if the path contains any & characters.

For me, I encountered this error when my test target did not have some swift files that my app build target had in compile sources. It was very confusing because the 'undeclared type' was being used in so many other places with no problem, and the error seemed vague. So solution there was of course to add the file containing the 'undeclared type' to the test target.

This docker image includes a bash script that can be used to remove images from a remote v2 registry : https://hub.docker.com/r/vidarl/remove_image_from_registry/

Also, comments have to be on their own line. They can't be put after an entry. So this won't work:

/node_modules  # DON'T COMMENT HERE (since nullifies entire line)

But this will work:

# fine to comment here
/node_modules

You can use the code from this minimal plugin. https://www.npmjs.com/package/paginator-js

Array.prototype.paginate = function(pageNumber, itemsPerPage){
  pageNumber   = Number(pageNumber)
  itemsPerPage = Number(itemsPerPage)
  pageNumber   = (pageNumber   < 1 || isNaN(pageNumber))   ? 1 : pageNumber
  itemsPerPage = (itemsPerPage < 1 || isNaN(itemsPerPage)) ? 1 : itemsPerPage

  var start     = ((pageNumber - 1) * itemsPerPage)
  var end       = start + itemsPerPage
  var loopCount = 0
  var result    = {
    data: [],
    end: false
  }

  for(loopCount = start; loopCount < end; loopCount++){
    this[loopCount] && result.data.push(this[loopCount]);
  }

  if(loopCount == this.length){
    result.end = true
  }

  return result
}

As a non-java selenium user, here is the python equivalent to Margus's answer:

from selenium import webdriver
from selenium.webdriver.common.desired_capabilities import DesiredCapabilities    

class ChromeConsoleLogging(object):

    def __init__(self, ):
        self.driver = None

    def setUp(self, ):
        desired = DesiredCapabilities.CHROME
        desired ['loggingPrefs'] = { 'browser':'ALL' }
        self.driver = webdriver.Chrome(desired_capabilities=desired)

    def analyzeLog(self, ):
        data = self.driver.get_log('browser')
        print(data)

    def testMethod(self, ):
        self.setUp()
        self.driver.get("http://mypage.com")
        self.analyzeLog()

Reference

Edit: Keeping Python answer in this thread because it is very similar to the Java answer and this post is returned on a Google search for the similar Python question

This provided a simple solution: Set data in Select2 after insert with AJAX

$("#select2").select2('data', {id: newID, text: newText});      

I think I had the same requirement as Tim, but none of the answers provide for a 'viewport edge-to-edge columns with normal internal gutters' solution. Or another way to put it: how can I get my first and last columns to break into the container padding and flow to the edge of the viewport, while still maintaining normal gutters between the columns.

From what I can tell, there is no neat and clean solution. This is what works for me, but it is well outside anything that would be supported by Bootstrap. But it works for now (Bootstrap 3.3.5 & 4.0-alpha).

http://www.bootply.com/ioWBaljBAd

Sample HTML:

<div class="container">
  <div class="row full-width-row">
    <div>
      <div class="col-sm-4 col-md-3">…</div>
      <div class="col-sm-4 col-md-3">…</div>
      <div class="col-sm-4 col-md-3">…</div>
      <div class="col-sm-4 col-md-3">…</div>
    </div>
  </div>
</div>

CSS:

.full-width-row {
  overflow-x: hidden;
}

.full-width-row > div {
  margin-left: -15px;
  margin-right: -15px;
}

The trick is to nest a div in between the row and the columns to generate the extra -15px margin to push into the container padding. The extra negative margin creates horizontal scroll (into whitespace) on small viewports. Adding overflow-x: hidden to the .row is required to suppress it.

This works the same for .container-fluid as .container.

My $0.02. This code is written in Swift 2.0

extension CALayer {
    private struct AssociatedKeys {
        static var shapeLayer:CAShapeLayer?
    }

    var shapeLayer: CAShapeLayer? {
        get {
            return objc_getAssociatedObject(self, &AssociatedKeys.shapeLayer) as? CAShapeLayer
        }
        set {
            if let newValue = newValue {
                objc_setAssociatedObject(self, &AssociatedKeys.shapeLayer, newValue as CAShapeLayer?, objc_AssociationPolicy.OBJC_ASSOCIATION_RETAIN_NONATOMIC)
            }
        }
    }
}

I have tried many solutions, and found this is the only way to actually extend a class with extra variable parameters.

Just add the function reference to the $scope in the controller:

for example if you want the function MyFunction to work in ng-click just add to the controller:

app.controller("MyController", ["$scope", function($scope) {
   $scope.MyFunction = MyFunction;
}]);

Another Javascript Solution

for(var i=0,keys = Object.keys(obj),len=keys.length;i<len;i++){ 
  if(typeof obj[keys[i]] === 'undefined'){
    delete obj[keys[i]];
  }
}

No additional hasOwnProperty check is required as Object.keys does not look up the prototype chain and returns only the properties of obj.

DEMO

The best solution:-

angular.module("myapp").controller("frstCtrl",function($scope){
    $scope.name="Atul Singh";
})
.controller("secondCtrl",function($scope){
     angular.extend(this, $controller('frstCtrl', {$scope:$scope}));
     console.log($scope);
})

// Here you got the first controller call without executing it

Try this:

 git fetch --all
 git reset --hard origin/master

Explanation:

git fetch downloads the latest from remote without trying to merge or rebase anything.

Please let me know if you have any questions!

What about replace the item if you know the position:

aList[0]=2014

Or if you don't know the position loop in the list, find the item and then replace it

aList = [123, 'xyz', 'zara', 'abc']
    for i,item in enumerate(aList):
      if item==123:
        aList[i]=2014
        break
    
    print aList

many answers above are close, but they get ~username syntax for deploy tokens incorrect. There are other types of tokens, but the deploy token is what gitlab offers (circa 2020+ at least) per repo to allow customized access, including read-only.

from a repository (or group), find the settings --> repository --> deploy tokens. Create a new one. A username and token field are created. The username is NOT a fixed value by default; it's unique to this token.

git clone https://<your_deploy_token_username>:<the_token>@gitlab.com/your/repo/path.git

tested on gitlab.com public, free account.

Like this:

Dim rng as Range
Set rng = ActiveCell.Resize(numRows, numCols)

then read the contents of that range to an array:

Dim arr As Variant
arr = rng.Value
'arr is now a two-dimensional array of size (numRows, numCols)

or, select the range (I don't think that's what you really want, but you ask for this in the question).

rng.Select

I had precisely this problem, but I needed sequential plots to have highly contrasting color. I was also doing plots with a common sub-plot containing reference data, so I wanted the color sequence to be consistently repeatable.

I initially tried simply generating colors randomly, reseeding the RNG before each plot. This worked OK (commented-out in code below), but could generate nearly indistinguishable colors. I wanted highly contrasting colors, ideally sampled from a colormap containing all colors.

I could have as many as 31 data series in a single plot, so I chopped the colormap into that many steps. Then I walked the steps in an order that ensured I wouldn't return to the neighborhood of a given color very soon.

My data is in a highly irregular time series, so I wanted to see the points and the lines, with the point having the 'opposite' color of the line.

Given all the above, it was easiest to generate a dictionary with the relevant parameters for plotting the individual series, then expand it as part of the call.

Here's my code. Perhaps not pretty, but functional.

from matplotlib import cm
cmap = cm.get_cmap('gist_rainbow')  #('hsv') #('nipy_spectral')

max_colors = 31   # Constant, max mumber of series in any plot.  Ideally prime.
color_number = 0  # Variable, incremented for each series.

def restart_colors():
    global color_number
    color_number = 0
    #np.random.seed(1)

def next_color():
    global color_number
    color_number += 1
    #color = tuple(np.random.uniform(0.0, 0.5, 3))
    color = cmap( ((5 * color_number) % max_colors) / max_colors )
    return color

def plot_args():  # Invoked for each plot in a series as: '**(plot_args())'
    mkr = next_color()
    clr = (1 - mkr[0], 1 - mkr[1], 1 - mkr[2], mkr[3])  # Give line inverse of marker color
    return {
        "marker": "o",
        "color": clr,
        "mfc": mkr,
        "mec": mkr,
        "markersize": 0.5,
        "linewidth": 1,
    }

My context is JupyterLab and Pandas, so here's sample plot code:

restart_colors()  # Repeatable color sequence for every plot

fig, axs = plt.subplots(figsize=(15, 8))
plt.title("%s + T-meter"%name)

# Plot reference temperatures:
axs.set_ylabel("°C", rotation=0)
for s in ["T1", "T2", "T3", "T4"]:
    df_tmeter.plot(ax=axs, x="Timestamp", y=s, label="T-meter:%s" % s, **(plot_args()))

# Other series gets their own axis labels
ax2 = axs.twinx()
ax2.set_ylabel(units)

for c in df_uptime_sensors:
    df_uptime[df_uptime["UUID"] == c].plot(
        ax=ax2, x="Timestamp", y=units, label="%s - %s" % (units, c), **(plot_args())
    )

fig.tight_layout()
plt.show()

The resulting plot may not be the best example, but it becomes more relevant when interactively zoomed in.

As someone who has worked with ASP.NET API for about 3 years, I'd recommend returning an HttpResponseMessage instead. Don't use the ActionResult or IEnumerable!

ActionResult is bad because as you've discovered.

Return IEnumerable<> is bad because you may want to extend it later and add some headers, etc.

Using JsonResult is bad because you should allow your service to be extendable and support other response formats as well just in case in the future; if you seriously want to limit it you can do so using Action Attributes, not in the action body.

public HttpResponseMessage GetAllNotificationSettings()
{
    var result = new List<ListItems>();
    // Filling the list with data here...

    // Then I return the list
    return Request.CreateResponse(HttpStatusCode.OK, result);
}

In my tests, I usually use the below helper method to extract my objects from the HttpResponseMessage:

 public class ResponseResultExtractor
    {
        public T Extract<T>(HttpResponseMessage response)
        {
            return response.Content.ReadAsAsync<T>().Result;
        }
    }

var actual = ResponseResultExtractor.Extract<List<ListItems>>(response);

In this way, you've achieved the below:

• Your Action can also return Error Messages and status codes like 404 not found so in the above way you can easily handle it.
• Your Action isn't limited to JSON only but supports JSON depending on the client's request preference and the settings in the Formatter.

Look at this: http://www.asp.net/web-api/overview/formats-and-model-binding/content-negotiation

For those who still have problems after attempting the suggestions above: I solved the issue by updating the maven project.

Convert the image to a byte[] and store that in the database.

Add this column to your model:

public byte[] Content { get; set; }

Then convert your image to a byte array and store that like you would any other data:

public byte[] ImageToByteArray(System.Drawing.Image imageIn)
{
    using(var ms = new MemoryStream())
    {
        imageIn.Save(ms, System.Drawing.Imaging.ImageFormat.Gif);

        return ms.ToArray();
    }
}

public Image ByteArrayToImage(byte[] byteArrayIn)
{
     using(var ms = new MemoryStream(byteArrayIn))
     {
         var returnImage = Image.FromStream(ms);

         return returnImage;
     }
}

Source: Fastest way to convert Image to Byte array

var image = new ImageEntity()
{
   Content = ImageToByteArray(image)
};

_context.Images.Add(image);
_context.SaveChanges();

When you want to get the image back, get the byte array from the database and use the ByteArrayToImage and do what you wish with the Image

This stops working when the byte[] gets to big. It will work for files under 100Mb

Solution it's quite simple

Just enable Builds for iOS 8 and Later

Long answer: it is possible!

1. Temporarily rename existing xampp folder
2. Install xampp 1.7.7 into xampp folder name
3. Folder containing just installed 1.7.7 distribution rename to different name and previously existing xampp folder rename back just to xampp.
4. In xampp folder rename php and apache folders to different names (I propose php_prev and apache_prev) so you can after switch back to them by renaming them back.
5. Copy apache and php folders from folder with xampp 1.7.7 into xampp directory

6. In xampp directory comment line apache/conf/httpd.conf:458

   #Include "conf/extra/httpd-perl.conf"

7. In xampp directory do next replaces in files:

php/pci.bat:15

from

"C:\xampp\php\.\php.exe" -f "\xampp\php\pci" -- %*

to

set XAMPPPHPDIR=C:\xampp\php "%XAMPPPHPDIR%\php.exe" -f "%XAMPPPHPDIR%\pci" -- %*

php/pciconf.bat:15

from

"C:\xampp\php\.\php.exe" -f "\xampp\php\pciconf" -- %*

to

set XAMPPPHPDIR=C:\xampp\php "%XAMPPPHPDIR%\.\php.exe" -f "%XAMPPPHPDIR%\pciconf" -- %*

php/pear.bat:33

from

IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=C:\xampp\php\.\php.exe"

to

IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=C:\xampp\php\php.exe"

php/peardev.bat:33

from

IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=C:\xampp\php\.\php.exe"

to

IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=C:\xampp\php\php.exe"

php/pecl.bat:32

from

IF "%PHP_PEAR_BIN_DIR%"=="" SET "PHP_PEAR_BIN_DIR=C:\xampp\php" IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=C:\xampp\php\.\php.exe"

to

IF "%PHP_PEAR_BIN_DIR%"=="" SET "PHP_PEAR_BIN_DIR=C:\xampp\php\" IF "%PHP_PEAR_PHP_BIN%"=="" SET "PHP_PEAR_PHP_BIN=C:\xampp\php\php.exe"

php/phar.phar.bat:1

from

%~dp0php.exe %~dp0pharcommand.phar %*

to

"%~dp0php.exe" "%~dp0pharcommand.phar" %*

Enjoy new XAMPP with PHP 5.3

Checked by myself in XAMPP 5.6.31, 7.0.15 & 7.1.1 with XAMPP Control Panel v3.2.2

I had to implement a custom solution because it's not as simple as you might think. My solution is based on stack trace inspection (inspect.stack()) + sys.path and is working fine no matter the location of the python module in which the function is invoked nor the interpreter (I tried by running it in PyCharm, in a poetry shell and other...). This is the full implementation with comments:

def get_project_root_dir() -> str:
    """
    Returns the name of the project root directory.

    :return: Project root directory name
    """

    # stack trace history related to the call of this function
    frame_stack: [FrameInfo] = inspect.stack()

    # get info about the module that has invoked this function
    # (index=0 is always this very module, index=1 is fine as long this function is not called by some other
    # function in this module)
    frame_info: FrameInfo = frame_stack[1]

    # if there are multiple calls in the stacktrace of this very module, we have to skip those and take the first
    # one which comes from another module
    if frame_info.filename == __file__:
        for frame in frame_stack:
            if frame.filename != __file__:
                frame_info = frame
                break

    # path of the module that has invoked this function
    caller_path: str = frame_info.filename

    # absolute path of the of the module that has invoked this function
    caller_absolute_path: str = os.path.abspath(caller_path)

    # get the top most directory path which contains the invoker module
    paths: [str] = [p for p in sys.path if p in caller_absolute_path]
    paths.sort(key=lambda p: len(p))
    caller_root_path: str = paths[0]

    if not os.path.isabs(caller_path):
        # file name of the invoker module (eg: "mymodule.py")
        caller_module_name: str = Path(caller_path).name

        # this piece represents a subpath in the project directory
        # (eg. if the root folder is "myproject" and this function has ben called from myproject/foo/bar/mymodule.py
        # this will be "foo/bar")
        project_related_folders: str = caller_path.replace(os.sep + caller_module_name, '')

        # fix root path by removing the undesired subpath
        caller_root_path = caller_root_path.replace(project_related_folders, '')

    dir_name: str = Path(caller_root_path).name

    return dir_name

Create an environment.plist file in ~/Library/LaunchAgents/ with this content:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
  <key>Label</key>
  <string>my.startup</string>
  <key>ProgramArguments</key>
  <array>
    <string>sh</string>
    <string>-c</string>
    <string>
    launchctl setenv PRODUCTS_PATH /Users/mortimer/Projects/my_products
    launchctl setenv ANDROID_NDK_HOME /Applications/android-ndk
    launchctl setenv PATH $PATH:/Applications/gradle/bin
    </string>

  </array>
  <key>RunAtLoad</key>
  <true/>
</dict>
</plist>

You can add many launchctl commands inside the <string></string> block.

The plist will activate after system reboot. You can also use launchctl load ~/Library/LaunchAgents/environment.plist to launch it immediately.

[Edit]

The same solution works in El Capitan too.

Xcode 7.0+ doesn't evaluate environment variables by default. The old behaviour can be enabled with this command:

defaults write com.apple.dt.Xcode UseSanitizedBuildSystemEnvironment -bool NO

[Edit]

There a couple of situations where this doesn't quite work. If the computer is restarted and "Reopen windows when logging back in" is selected, the reopened windows may not see the variables (Perhaps they are opened before the agent is run). Also, if you log in via ssh, the variables will not be set (so you'll need to set them in ~/.bash_profile). Finally, this doesn't seem to work for PATH on El Capitan and Sierra. That needs to be set via 'launchctl config user path ...' and in /etc/paths.

You could use inline styles and define the width in the <th> tag. Make it so that the sum of the widths = 100%.

    <tr>
        <th style="width:10%">Size</th>
        <th style="width:30%">Bust</th>
        <th style="width:50%">Waist</th>
        <th style="width:10%">Hips</th>
    </tr>

Bootply demo

Typically using inline styles is not ideal, however this does provide flexibility because you can get very specific and granular with exact widths.

@echo off
color 0a
set /p language=
if %language% == DE (
    goto LGDE
) else (
    if %language% == EN (
    goto LGEN
    ) else (
    echo N/A
)

:LGDE
(code)
:LGEN
(code)

I found some "solution".

This code doesn't work:

<table>
<thead>
    <tr>
        <th colspan="3">Test</th>
    </tr>
</thead>
<tbody>
    <tr>
        <td>1</td>
        <td>2</td>
        <td>3</td>
    </tr>
</tbody>

But this is ok:

<table>
<thead>
    <tr>
        <th colspan="2">Test</th>
        <th></th>
    </tr>
</thead>
<tbody>
    <tr>
        <td>1</td>
        <td>2</td>
        <td>3</td>
    </tr>
</tbody>

I think, that the problem is, that the last TH can't have attribute colspan.

For Swift 4 the following has worked for me:

let dicNumArray = ["q":[1,2,3,4,5],"a":[2,3,4,5,5],"s":[123,123,132,43,4],"t":[00,88,66,542,321]]

let sortedDic = dicNumArray.sorted { (aDic, bDic) -> Bool in
    return aDic.key < bDic.key
}

Remember that Raspberry Pi does not have real time clock. So even you are connected to internet have to set the time every time you power on or restart.

This is how it works:

1. Type sudo raspi-config in the Raspberry Pi command line
2. Internationalization options
3. Change Time Zone
4. Select geographical area
5. Select city or region
6. Reboot your pi

Next thing you can set time using this command

sudo date -s "Mon Aug  12 20:14:11 UTC 2014"

More about data and time

man date

When Pi is connected to computer should have to manually set data and time

For Linux Mint 18: edit ~/.bashrc and add this line to it at the bottom:

export PATH="$PATH:$HOME/.config/composer/vendor/bin"

then resource .bashrc (type in console):

source ~/.bashrc (or close and reopen the terminal)

test it by typing in the console:

echo $PATH

or type in console:

laravel

{% for i in yourlist %}
  {% for k,v in i.items() %}
    {# do what you want here #}
  {% endfor %}
{% endfor %}

You don't need to run any docker commands as sudo when you're using boot2docker as every command passed into the boot2docker VM runs as root by default.

You're seeing the error when you're running as sudo because sudo doesn't have the DOCKER_HOST env set, only your user does.

You can confirm this by doing a:

$ env

Then a

$ sudo env

And looking for DOCKER_HOST in each output.

As for having a docker file that runs your script, something like this might work for you:

Dockerfile

FROM busybox

# Copy your script into the docker image
ADD /path/to/your/script.sh /usr/local/bin/script.sh

# Run your script
CMD /usr/local/bin/script.sh

Then you can run:

docker build -t your-image-name:your-tag .

This will build your docker image, which you can see by doing a:

docker images

Then, to run your container, you can do a:

docker run your-image-name:your-tag

This run command will start a container from the image you created with your Dockerfile and your build command and then it will finish once your script.sh has finished executing.

I was receiving this error and also notices that the application Postman was also falling but was working in app Advanced Rest Client (ARC) and working in Android. So i had to install Charles to debug the communication and I notices that response code was -1. The problem was that REST programmer forgot to return response code 200.

I hope that this help other developers.

this is how I do it

JAVASCRIPT:

var module = angular.module('yourModuleName', ['ui.router']);

module.run( ['$rootScope', '$state', '$stateParams',
                      function ($rootScope,   $state,   $stateParams) {
    $rootScope.$state = $state;
    $rootScope.$stateParams = $stateParams; 
}
]);

HTML:

<pre id="uiRouterInfo">
      $state = {{$state.current.name}}
      $stateParams = {{$stateParams}}
      $state full url = {{ $state.$current.url.source }}    
</pre>

EXAMPLE

http://plnkr.co/edit/LGMZnj?p=preview

You can use the ternary operator notation:

<div id="homePage" ng-class="page.isSelected(1)? 'center' : 'left'">

I had the same problem as yours. I found that when i use the BoundField tag in GridView to show my data. The row.Cells[1].Text is working in:

GridViewRow row = dgCustomer.SelectedRow;
TextBox1.Text = "Cell Value" + row.Cells[1].Text + "";

But when i use TemplateField tag to show data like this:

 <asp:TemplateField HeaderText="??">
    <ItemTemplate>
    <asp:Label ID="Part_No" runat="server" Text='<%# Eval("Part_No")%>' ></asp:Label>
    </ItemTemplate>
    <HeaderStyle CssClass="bhead" />
    <ItemStyle CssClass="bbody" />
    </asp:TemplateField>

The row.Cells[1].Text just return null. I got stuck in this problem for a long time. I figur out recently and i want to share with someone who have the same problem my solution. Please feel free to edit this post and/or correct me.

My Solution:

Label lbCod = GridView1.Rows["AnyValidIndex"].Cells["AnyValidIndex"].Controls["AnyValidIndex"] as Label;

I use Controls attribute to find the Label control which i use to show data, and you can find yours. When you find it and convert to the correct type object than you can extract text and so on. Ex:

string showText = lbCod.Text;

Reference: reference

ScareCrow's answer in Swift 3

let padding = UIEdgeInsets(top: 0, left: 5, bottom: 0, right: 5);

override func textRect(forBounds bounds: CGRect) -> CGRect {
    return UIEdgeInsetsInsetRect(bounds, padding)
}

override func placeholderRect(forBounds bounds: CGRect) -> CGRect {
    return UIEdgeInsetsInsetRect(bounds, padding)
}

override func editingRect(forBounds bounds: CGRect) -> CGRect {
    return UIEdgeInsetsInsetRect(bounds, padding)
}

For your case, you can directly use JPA methods. That code is like bellow :

Containing: select ... like %:place%

List<Registration> findByPlaceContainingIgnoreCase(String place);

here, IgnoreCase will help you to search item with ignoring the case.

Using @Query in JPQL :

@Query("Select registration from Registration registration where 
registration.place LIKE  %?1%")
List<Registration> findByPlaceContainingIgnoreCase(String place);

Here are some related methods:

1. Like findByPlaceLike

   … where x.place like ?1

2. StartingWith findByPlaceStartingWith

   … where x.place like ?1 (parameter bound with appended %)

3. EndingWith findByPlaceEndingWith

   … where x.place like ?1 (parameter bound with prepended %)

4. Containing findByPlaceContaining

   … where x.place like ?1 (parameter bound wrapped in %)

More info, view this link , this link and this

Hope this will help you :)

Another way to squash all your commits is to reset the index to master:

 git checkout yourBranch
 git reset $(git merge-base master yourBranch)
 git add -A
 git commit -m "one commit on yourBranch"

This isn't perfect as it implies you know from which branch "yourBranch" is coming from.
Note: finding that origin branch isn't easy/possible with Git (the visual way is often the easiest, as seen here).

EDIT: you will need to use git push --force

Karlotcha Hoa adds in the comments:

For the reset, you can do

git reset $(git merge-base master $(git rev-parse --abbrev-ref HEAD)) 

[That] automatically uses the branch you are currently on.
And if you use that, you can also use an alias, as the command doesn't rely on the branch name.

Spring Boot by default has a “whitelabel” error page which you can see in a browser if you encounter a server error. Whitelabel Error Page is a generic Spring Boot error page which is displayed when no custom error page is found.

Set “server.error.whitelabel.enabled=false” to switch of the default error page

Set the display.max_colwidth option to None (or -1 before version 1.0):

pd.set_option('display.max_colwidth', None)

set_option docs

For example, in iPython, we see that the information is truncated to 50 characters. Anything in excess is ellipsized:

If you set the display.max_colwidth option, the information will be displayed fully:

Each tablespace has one or more datafiles that it uses to store data.

The max size of a datafile depends on the block size of the database. I believe that, by default, that leaves with you with a max of 32gb per datafile.

To find out if the actual limit is 32gb, run the following:

select value from v$parameter where name = 'db_block_size';

Compare the result you get with the first column below, and that will indicate what your max datafile size is.

I have Oracle Personal Edition 11g r2 and in a default install it had an 8,192 block size (32gb per data file).

Block Sz   Max Datafile Sz (Gb)   Max DB Sz (Tb)

--------   --------------------   --------------

   2,048                  8,192          524,264

   4,096                 16,384        1,048,528

   8,192                 32,768        2,097,056

  16,384                 65,536        4,194,112

  32,768                131,072        8,388,224

You can run this query to find what datafiles you have, what tablespaces they are associated with, and what you've currrently set the max file size to (which cannot exceed the aforementioned 32gb):

select bytes/1024/1024 as mb_size,
       maxbytes/1024/1024 as maxsize_set,
       x.*
from   dba_data_files x

MAXSIZE_SET is the maximum size you've set the datafile to. Also relevant is whether you've set the AUTOEXTEND option to ON (its name does what it implies).

If your datafile has a low max size or autoextend is not on you could simply run:

alter database datafile 'path_to_your_file\that_file.DBF' autoextend on maxsize unlimited;

However if its size is at/near 32gb an autoextend is on, then yes, you do need another datafile for the tablespace:

alter tablespace system add datafile 'path_to_your_datafiles_folder\name_of_df_you_want.dbf' size 10m autoextend on maxsize unlimited;

Usually for jumping people use Rigidbody2D.AddForce with Forcemode.Impulse. It may seem like your object is pushed once in Y axis and it will fall down automatically due to gravity.

Example:

rigidbody2D.AddForce(new Vector2(0, 10), ForceMode2D.Impulse);

U can setup AVPlayer in another way, that open for u full customization of your video Player screen

Swift 2.3

1. Create UIView subclass for playing video (basically u can use any UIView object and only needed is AVPlayerLayer. I setup in this way because it much clearer for me)

   import AVFoundation
   import UIKit
   
   class PlayerView: UIView {
   
   override class func layerClass() -> AnyClass {
       return AVPlayerLayer.self
   }
   
   var player:AVPlayer? {
       set {
           if let layer = layer as? AVPlayerLayer {
               layer.player = player
           }
       }
       get {
           if let layer = layer as? AVPlayerLayer {
               return layer.player
           } else {
               return nil
           }
       }
   }
   }
   

2. Setup your player

   import AVFoundation
   import Foundation
   
   protocol VideoPlayerDelegate {
       func downloadedProgress(progress:Double)
       func readyToPlay()
       func didUpdateProgress(progress:Double)
       func didFinishPlayItem()
       func didFailPlayToEnd()
   }
   
   let videoContext:UnsafeMutablePointer<Void> = nil
   
   class VideoPlayer : NSObject {
   
       private var assetPlayer:AVPlayer?
       private var playerItem:AVPlayerItem?
       private var urlAsset:AVURLAsset?
       private var videoOutput:AVPlayerItemVideoOutput?
   
       private var assetDuration:Double = 0
       private var playerView:PlayerView?
   
       private var autoRepeatPlay:Bool = true
       private var autoPlay:Bool = true
   
       var delegate:VideoPlayerDelegate?
   
       var playerRate:Float = 1 {
           didSet {
               if let player = assetPlayer {
                   player.rate = playerRate > 0 ? playerRate : 0.0
               }
           }
       }
   
       var volume:Float = 1.0 {
           didSet {
               if let player = assetPlayer {
                   player.volume = volume > 0 ? volume : 0.0
               }
           }
       }
   
       // MARK: - Init
   
       convenience init(urlAsset:NSURL, view:PlayerView, startAutoPlay:Bool = true, repeatAfterEnd:Bool = true) {
           self.init()
   
           playerView = view
           autoPlay = startAutoPlay
           autoRepeatPlay = repeatAfterEnd
   
           if let playView = playerView, let playerLayer = playView.layer as? AVPlayerLayer {
               playerLayer.videoGravity = AVLayerVideoGravityResizeAspectFill
           }
           initialSetupWithURL(urlAsset)
           prepareToPlay()
       }
   
       override init() {
           super.init()
       }
   
       // MARK: - Public
   
       func isPlaying() -> Bool {
           if let player = assetPlayer {
               return player.rate > 0
           } else {
               return false
           }
       }
   
       func seekToPosition(seconds:Float64) {
           if let player = assetPlayer {
               pause()
               if let timeScale = player.currentItem?.asset.duration.timescale {
                   player.seekToTime(CMTimeMakeWithSeconds(seconds, timeScale), completionHandler: { (complete) in
                       self.play()
                   })
               }
           }
       }
   
       func pause() {
           if let player = assetPlayer {
               player.pause()
           }
       }
   
       func play() {
           if let player = assetPlayer {
               if (player.currentItem?.status == .ReadyToPlay) {
                   player.play()
                   player.rate = playerRate
               }
           }
       }
   
       func cleanUp() {
           if let item = playerItem {
               item.removeObserver(self, forKeyPath: "status")
               item.removeObserver(self, forKeyPath: "loadedTimeRanges")
           }
           NSNotificationCenter.defaultCenter().removeObserver(self)
           assetPlayer = nil
           playerItem = nil
           urlAsset = nil
       }
   
       // MARK: - Private
   
       private func prepareToPlay() {
           let keys = ["tracks"]
           if let asset = urlAsset {
               asset.loadValuesAsynchronouslyForKeys(keys, completionHandler: {
                   dispatch_async(dispatch_get_main_queue(), {
                       self.startLoading()
                   })
               })
           }
       }
   
       private func startLoading(){
           var error:NSError?
           guard let asset = urlAsset else {return}
           let status:AVKeyValueStatus = asset.statusOfValueForKey("tracks", error: &error)
   
           if status == AVKeyValueStatus.Loaded {
               assetDuration = CMTimeGetSeconds(asset.duration)
   
               let videoOutputOptions = [kCVPixelBufferPixelFormatTypeKey as String : Int(kCVPixelFormatType_420YpCbCr8BiPlanarVideoRange)]
               videoOutput = AVPlayerItemVideoOutput(pixelBufferAttributes: videoOutputOptions)
               playerItem = AVPlayerItem(asset: asset)
   
               if let item = playerItem {
                   item.addObserver(self, forKeyPath: "status", options: .Initial, context: videoContext)
                   item.addObserver(self, forKeyPath: "loadedTimeRanges", options: [.New, .Old], context: videoContext)
   
                   NSNotificationCenter.defaultCenter().addObserver(self, selector: #selector(playerItemDidReachEnd), name: AVPlayerItemDidPlayToEndTimeNotification, object: nil)
                   NSNotificationCenter.defaultCenter().addObserver(self, selector: #selector(didFailedToPlayToEnd), name: AVPlayerItemFailedToPlayToEndTimeNotification, object: nil)
   
                   if let output = videoOutput {
                       item.addOutput(output)
   
                       item.audioTimePitchAlgorithm = AVAudioTimePitchAlgorithmVarispeed
                       assetPlayer = AVPlayer(playerItem: item)
   
                       if let player = assetPlayer {
                           player.rate = playerRate
                       }
   
                       addPeriodicalObserver()
                       if let playView = playerView, let layer = playView.layer as? AVPlayerLayer {
                           layer.player = assetPlayer
                           print("player created")
                       }
                   }
               }
           }        
       }
   
       private func addPeriodicalObserver() {
           let timeInterval = CMTimeMake(1, 1)
   
           if let player = assetPlayer {
               player.addPeriodicTimeObserverForInterval(timeInterval, queue: dispatch_get_main_queue(), usingBlock: { (time) in
                   self.playerDidChangeTime(time)
               })
           }
       }
   
       private func playerDidChangeTime(time:CMTime) {
           if let player = assetPlayer {
               let timeNow = CMTimeGetSeconds(player.currentTime())
               let progress = timeNow / assetDuration
   
               delegate?.didUpdateProgress(progress)
           }
       }
   
       @objc private func playerItemDidReachEnd() {
           delegate?.didFinishPlayItem()
   
           if let player = assetPlayer {
               player.seekToTime(kCMTimeZero)
               if autoRepeatPlay == true {
                   play()
               }
           }
       }
   
       @objc private func didFailedToPlayToEnd() {
           delegate?.didFailPlayToEnd()
       }
   
       private func playerDidChangeStatus(status:AVPlayerStatus) {
           if status == .Failed {
               print("Failed to load video")
           } else if status == .ReadyToPlay, let player = assetPlayer {
               volume = player.volume
               delegate?.readyToPlay()
   
               if autoPlay == true && player.rate == 0.0 {
                   play()
               }
           }
       }
   
       private func moviewPlayerLoadedTimeRangeDidUpdated(ranges:Array<NSValue>) {
           var maximum:NSTimeInterval = 0
           for value in ranges {
               let range:CMTimeRange = value.CMTimeRangeValue
               let currentLoadedTimeRange = CMTimeGetSeconds(range.start) + CMTimeGetSeconds(range.duration)
               if currentLoadedTimeRange > maximum {
                   maximum = currentLoadedTimeRange
               }
           }
           let progress:Double = assetDuration == 0 ? 0.0 : Double(maximum) / assetDuration
   
           delegate?.downloadedProgress(progress)
       }
   
       deinit {
           cleanUp()
       }
   
       private func initialSetupWithURL(url:NSURL) {
           let options = [AVURLAssetPreferPreciseDurationAndTimingKey : true]
           urlAsset = AVURLAsset(URL: url, options: options)
       }
   
       // MARK: - Observations
   
       override func observeValueForKeyPath(keyPath: String?, ofObject object: AnyObject?, change: [String : AnyObject]?, context: UnsafeMutablePointer<Void>) {
           if context == videoContext {
               if let key = keyPath {
                   if key == "status", let player = assetPlayer {
                       playerDidChangeStatus(player.status)
                   } else if key == "loadedTimeRanges", let item = playerItem {
                       moviewPlayerLoadedTimeRangeDidUpdated(item.loadedTimeRanges)
                   }
               }
           }
       }
   
   }
   

3. Usage:

assume u have view

@IBOutlet private weak var playerView: PlayerView!
private var videoPlayer:VideoPlayer?

and in viewDidLoad()

    private func preparePlayer() {
        if let filePath = NSBundle.mainBundle().pathForResource("intro", ofType: "m4v") {
            let fileURL = NSURL(fileURLWithPath: filePath)
            videoPlayer = VideoPlayer(urlAsset: fileURL, view: playerView)
            if let player = videoPlayer {
                player.playerRate = 0.67
            }
        }
    }

Objective-C

PlayerView.h

    #import <AVFoundation/AVFoundation.h>
    #import <UIKit/UIKit.h>

    /*!
     @class PlayerView
     @discussion Represent View for playinv video. Layer - PlayerLayer
     @availability iOS 7 and Up
     */
    @interface PlayerView : UIView

    /*!
     @var player
     @discussion Player object
     */
    @property (strong, nonatomic) AVPlayer *player;

    @end

PlayerView.m

    #import "PlayerView.h"

    @implementation PlayerView

    #pragma mark - LifeCycle

    + (Class)layerClass
    {
        return [AVPlayerLayer class];
    }

    #pragma mark - Setter/Getter

    - (AVPlayer*)player
    {
        return [(AVPlayerLayer *)[self layer] player];
    }

    - (void)setPlayer:(AVPlayer *)player
    {
        [(AVPlayerLayer *)[self layer] setPlayer:player];
    }

    @end

VideoPlayer.h

    #import <AVFoundation/AVFoundation.h>
    #import <UIKit/UIKit.h>
    #import "PlayerView.h"

    /*!
     @protocol VideoPlayerDelegate
     @discussion Events from VideoPlayer
     */
    @protocol VideoPlayerDelegate <NSObject>

    @optional

    /*!
     @brief Called whenever time when progress of played item changed
     @param progress
     Playing progress
     */
    - (void)progressDidUpdate:(CGFloat)progress;

    /*!
     @brief Called whenever downloaded item progress changed
     @param progress
     Playing progress
     */
    - (void)downloadingProgress:(CGFloat)progress;

    /*!
     @brief Called when playing time changed
     @param time
     Playing progress
     */
    - (void)progressTimeChanged:(CMTime)time;

    /*!
     @brief Called when player finish play item
    */
    - (void)playerDidPlayItem;

    /*!
     @brief Called when player ready to play item
     */
    - (void)isReadyToPlay;

    @end

    /*!
     @class VideoPlayer
     @discussion Video Player
     @code
         self.videoPlayer = [[VideoPlayer alloc] initVideoPlayerWithURL:someURL playerView:self.playerView];
         [self.videoPlayer prepareToPlay];
         self.videoPlayer.delegate = self; //optional

         //after when required play item
         [self.videoPlayer play];
     @endcode
     */
    @interface VideoPlayer : NSObject

    /*!
     @var delegate
     @abstract Delegate for VideoPlayer
     @discussion Set object to this property for getting response and notifications from this class
     */
    @property (weak, nonatomic) id <VideoPlayerDelegate> delegate;

    /*!
     @var volume
     @discussion volume of played asset
     */
    @property (assign, nonatomic) CGFloat volume;

    /*!
     @var autoRepeat
     @discussion indicate whenever player should repeat content on finish playing
     */
    @property (assign, nonatomic) BOOL autoRepeat;

    /*!
     @brief Create player with asset URL
     @param urlAsset
     Source URL
     @result
     instance of VideoPlayer
     */
    - (instancetype)initVideoPlayerWithURL:(NSURL *)urlAsset;

    /*!
     @brief Create player with asset URL and configure selected view for showing result
     @param urlAsset
     Source URL
     @param view
     View on wchich result will be showed
     @result
     instance of VideoPlayer
     */
    - (instancetype)initVideoPlayerWithURL:(NSURL *)urlAsset playerView:(PlayerView *)view;

    /*!
     @brief Call this method after creating player to prepare player to play
    */
    - (void)prepareToPlay;

    /*!
     @brief Play item
     */
    - (void)play;
    /*!
     @brief Pause item
     */
    - (void)pause;
    /*!
     @brief Stop item
     */
    - (void)stop;

    /*!
     @brief Seek required position in item and pla if rquired
     @param progressValue
     % of position to seek
     @param isPlaying
     YES if player should start to play item implicity
     */
    - (void)seekPositionAtProgress:(CGFloat)progressValue withPlayingStatus:(BOOL)isPlaying;

    /*!
     @brief Player state
     @result
     YES - if playing, NO if not playing
     */
    - (BOOL)isPlaying;

    /*!
     @brief Indicate whenever player can provide CVPixelBufferRef frame from item
     @result
     YES / NO
     */
    - (BOOL)canProvideFrame;

    /*!
     @brief CVPixelBufferRef frame from item
     @result
     CVPixelBufferRef frame
     */
    - (CVPixelBufferRef)getCurrentFramePicture;

    @end

VideoPlayer.m

    #import "VideoPlayer.h"

    typedef NS_ENUM(NSUInteger, InternalStatus) {
        InternalStatusPreparation,
        InternalStatusReadyToPlay,
    };

    static const NSString *ItemStatusContext;

    @interface VideoPlayer()

    @property (strong, nonatomic) AVPlayer *assetPlayer;
    @property (strong, nonatomic) AVPlayerItem *playerItem;
    @property (strong, nonatomic) AVURLAsset *urlAsset;
    @property (strong, atomic) AVPlayerItemVideoOutput *videoOutput;

    @property (assign, nonatomic) CGFloat assetDuration;
    @property (strong, nonatomic) PlayerView *playerView;

    @property (assign, nonatomic) InternalStatus status;

    @end

    @implementation VideoPlayer

    #pragma mark - LifeCycle

    - (instancetype)initVideoPlayerWithURL:(NSURL *)urlAsset
    {
        if (self = [super init]) {
            [self initialSetupWithURL:urlAsset];
        }
        return self;
    }

    - (instancetype)initVideoPlayerWithURL:(NSURL *)urlAsset playerView:(PlayerView *)view
    {
        if (self = [super init]) {
            ((AVPlayerLayer *)view.layer).videoGravity = AVLayerVideoGravityResizeAspectFill;
            [self initialSetupWithURL:urlAsset playerView:view];
        }
        return self;
    }

    #pragma mark - Public

    - (void)play
    {
        if ((self.assetPlayer.currentItem) && (self.assetPlayer.currentItem.status == AVPlayerItemStatusReadyToPlay)) {
            [self.assetPlayer play];
        }
    }

    - (void)pause
    {
        [self.assetPlayer pause];
    }

    - (void)seekPositionAtProgress:(CGFloat)progressValue withPlayingStatus:(BOOL)isPlaying
    {
        [self.assetPlayer pause];
        int32_t timeScale = self.assetPlayer.currentItem.asset.duration.timescale;

        __weak typeof(self) weakSelf = self;
        [self.assetPlayer seekToTime:CMTimeMakeWithSeconds(progressValue, timeScale) completionHandler:^(BOOL finished) {
            DLog(@"SEEK To time %f - success", progressValue);
            if (isPlaying && finished) {
                [weakSelf.assetPlayer play];
            }
        }];
    }

    - (void)setPlayerVolume:(CGFloat)volume
    {
        self.assetPlayer.volume = volume > .0 ? MAX(volume, 0.7) : 0.0f;
        [self.assetPlayer play];
    }

    - (void)setPlayerRate:(CGFloat)rate
    {
        self.assetPlayer.rate = rate > .0 ? rate : 0.0f;
    }

    - (void)stop
    {
        [self.assetPlayer seekToTime:kCMTimeZero];
        self.assetPlayer.rate =.0f;
    }

    - (BOOL)isPlaying
    {
        return self.assetPlayer.rate > 0 ? YES : NO;
    }

    #pragma mark - Private

    - (void)initialSetupWithURL:(NSURL *)url
    {
        self.status = InternalStatusPreparation;
        [self setupPlayerWithURL:url];
    }

    - (void)initialSetupWithURL:(NSURL *)url playerView:(PlayerView *)view
    {
        [self setupPlayerWithURL:url];
        self.playerView = view;
    }

    - (void)setupPlayerWithURL:(NSURL *)url
    {
        NSDictionary *assetOptions = @{ AVURLAssetPreferPreciseDurationAndTimingKey : @YES };
        self.urlAsset = [AVURLAsset URLAssetWithURL:url options:assetOptions];
    }

    - (void)prepareToPlay
    {
        NSArray *keys = @[@"tracks"];
        __weak VideoPlayer *weakSelf = self;
        [weakSelf.urlAsset loadValuesAsynchronouslyForKeys:keys completionHandler:^{
            dispatch_async(dispatch_get_main_queue(), ^{
                [weakSelf startLoading];
            });
        }];
    }

    - (void)startLoading
    {
        NSError *error;
        AVKeyValueStatus status = [self.urlAsset statusOfValueForKey:@"tracks" error:&error];
        if (status == AVKeyValueStatusLoaded) {
            self.assetDuration = CMTimeGetSeconds(self.urlAsset.duration);
            NSDictionary* videoOutputOptions = @{ (id)kCVPixelBufferPixelFormatTypeKey : @(kCVPixelFormatType_420YpCbCr8BiPlanarVideoRange)};
            self.videoOutput = [[AVPlayerItemVideoOutput alloc] initWithPixelBufferAttributes:videoOutputOptions];
            self.playerItem = [AVPlayerItem playerItemWithAsset: self.urlAsset];

            [self.playerItem addObserver:self
                              forKeyPath:@"status"
                                 options:NSKeyValueObservingOptionInitial
                                 context:&ItemStatusContext];
            [self.playerItem addObserver:self
                              forKeyPath:@"loadedTimeRanges"
                                 options:NSKeyValueObservingOptionNew|NSKeyValueObservingOptionOld
                                 context:&ItemStatusContext];
            [[NSNotificationCenter defaultCenter] addObserver:self
                                                     selector:@selector(playerItemDidReachEnd:)
                                                         name:AVPlayerItemDidPlayToEndTimeNotification
                                                       object:self.playerItem];
            [[NSNotificationCenter defaultCenter] addObserver:self
                                                     selector:@selector(didFailedToPlayToEnd)
                                                         name:AVPlayerItemFailedToPlayToEndTimeNotification
                                                       object:nil];

            [self.playerItem addOutput:self.videoOutput];
            self.assetPlayer = [AVPlayer playerWithPlayerItem:self.playerItem];
            [self addPeriodicalObserver];
            [((AVPlayerLayer *)self.playerView.layer) setPlayer:self.assetPlayer];
            DLog(@"Player created");
        } else {
            DLog(@"The asset's tracks were not loaded:\n%@", error.localizedDescription);
        }
    }

    #pragma mark - Observation

    - (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context
    {
        BOOL isOldKey = [change[NSKeyValueChangeNewKey] isEqual:change[NSKeyValueChangeOldKey]];

        if (!isOldKey) {
            if (context == &ItemStatusContext) {
                if ([keyPath isEqualToString:@"status"] && !self.status) {
                    if (self.assetPlayer.status == AVPlayerItemStatusReadyToPlay) {
                        self.status = InternalStatusReadyToPlay;
                    }
                    [self moviePlayerDidChangeStatus:self.assetPlayer.status];
                } else if ([keyPath isEqualToString:@"loadedTimeRanges"]) {
                    [self moviewPlayerLoadedTimeRangeDidUpdated:self.playerItem.loadedTimeRanges];
                }
            }
        }
    }

    - (void)moviePlayerDidChangeStatus:(AVPlayerStatus)status
    {
        if (status == AVPlayerStatusFailed) {
            DLog(@"Failed to load video");
        } else if (status == AVPlayerItemStatusReadyToPlay) {
            DLog(@"Player ready to play");
            self.volume = self.assetPlayer.volume;

            if (self.delegate && [self.delegate respondsToSelector:@selector(isReadyToPlay)]) {
                [self.delegate isReadyToPlay];
            }
        }
    }

    - (void)moviewPlayerLoadedTimeRangeDidUpdated:(NSArray *)ranges
    {
        NSTimeInterval maximum = 0;

        for (NSValue *value in ranges) {
            CMTimeRange range;
            [value getValue:&range];
            NSTimeInterval currenLoadedRangeTime = CMTimeGetSeconds(range.start) + CMTimeGetSeconds(range.duration);
            if (currenLoadedRangeTime > maximum) {
                maximum = currenLoadedRangeTime;
            }
        }
        CGFloat progress = (self.assetDuration == 0) ? 0 : maximum / self.assetDuration;
        if (self.delegate && [self.delegate respondsToSelector:@selector(downloadingProgress:)]) {
            [self.delegate downloadingProgress:progress];
        }
    }

    - (void)playerItemDidReachEnd:(NSNotification *)notification
    {
        if (self.delegate && [self.delegate respondsToSelector:@selector(playerDidPlayItem)]){
            [self.delegate playerDidPlayItem];
        }
        [self.assetPlayer seekToTime:kCMTimeZero];
        if (self.autoRepeat) {
            [self.assetPlayer play];
        }
    }

    - (void)didFailedToPlayToEnd
    {
        DLog(@"Failed play video to the end");
    }

    - (void)addPeriodicalObserver
    {
        CMTime interval = CMTimeMake(1, 1);
        __weak typeof(self) weakSelf = self;
        [self.assetPlayer addPeriodicTimeObserverForInterval:interval queue:dispatch_get_main_queue() usingBlock:^(CMTime time) {
            [weakSelf playerTimeDidChange:time];
        }];
    }

    - (void)playerTimeDidChange:(CMTime)time
    {
        double timeNow = CMTimeGetSeconds(self.assetPlayer.currentTime);
        if (self.delegate && [self.delegate respondsToSelector:@selector(progressDidUpdate:)]) {
            [self.delegate progressDidUpdate:(CGFloat) (timeNow / self.assetDuration)];
        }
    }

    #pragma mark - Notification

    - (void)setupAppNotification
    {
        [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(didEnterBackground) name:UIApplicationDidEnterBackgroundNotification object:nil];
        [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(willEnterForeground) name:UIApplicationWillEnterForegroundNotification object:nil];
    }

    - (void)didEnterBackground
    {
        [self.assetPlayer pause];
    }

    - (void)willEnterForeground
    {
        [self.assetPlayer pause];
    }

    #pragma mark - GetImagesFromVideoPlayer

    - (BOOL)canProvideFrame
    {
        return self.assetPlayer.status == AVPlayerItemStatusReadyToPlay;
    }

    - (CVPixelBufferRef)getCurrentFramePicture
    {
        CMTime currentTime = [self.videoOutput itemTimeForHostTime:CACurrentMediaTime()];
        if (self.delegate && [self.delegate respondsToSelector:@selector(progressTimeChanged:)]) {
            [self.delegate progressTimeChanged:currentTime];
        }
        if (![self.videoOutput hasNewPixelBufferForItemTime:currentTime]) {
            return 0;
        }
        CVPixelBufferRef buffer = [self.videoOutput copyPixelBufferForItemTime:currentTime itemTimeForDisplay:NULL];

        return buffer;
    }

    #pragma mark - CleanUp

    - (void)removeObserversFromPlayer
    {
        @try {
            [self.playerItem removeObserver:self forKeyPath:@"status"];
            [self.playerItem removeObserver:self forKeyPath:@"loadedTimeRanges"];
            [[NSNotificationCenter defaultCenter] removeObserver:self];
            [[NSNotificationCenter defaultCenter] removeObserver:self.assetPlayer];        
        }
        @catch (NSException *ex) {
            DLog(@"Cant remove observer in Player - %@", ex.description);
        }
    }

    - (void)cleanUp
    {
        [self removeObserversFromPlayer];

        self.assetPlayer.rate = 0;
        self.assetPlayer = nil;
        self.playerItem = nil;
        self.urlAsset = nil;
    }

    - (void)dealloc
    {
        [self cleanUp];    
    }

    @end

Off cause resource (video file) should have target membership setted to your project

Additional - link to perfect Apple Developer guide

Unzip the github project to a folder. Open Android Studio. Go to File -> New -> Import Project. Then choose the specific project you want to import and then click Next->Finish. It will build the Gradle automatically and'll be ready for you to use.

P.S: In some versions of Android Studio a certain error occurs-
error:package android.support.v4.app does not exist.
To fix it go to Gradle Scripts->build.gradle(Module:app) and the add the dependecies:

dependencies {      
    compile fileTree(dir: 'libs', include: ['*.jar'])  
    compile 'com.android.support:appcompat-v7:21.0.3'  
}

Enjoy working in Android Studio

First you need to prepare your url to accept the param in the regex: (urls.py)

url(r'^panel/person/(?P<person_id>[0-9]+)$', 'apps.panel.views.person_form', name='panel_person_form'),

So you use this in your template:

{% url 'panel_person_form' person_id=item.id %}

If you have more than one param, you can change your regex and modify the template using the following:

{% url 'panel_person_form' person_id=item.id group_id=3 %}

Leonid Beschastny's answer works but I also had to convert ArrayBuffer to Buffer that is used in the Node's request module. After uploading file to the server I had it in the same format that comes from the HTML5 FileAPI (I'm using Meteor). Full code below - maybe it will be helpful for others.

function toBuffer(ab) {
  var buffer = new Buffer(ab.byteLength);
  var view = new Uint8Array(ab);
  for (var i = 0; i < buffer.length; ++i) {
    buffer[i] = view[i];
  }
  return buffer;
}

var req = request.post(url, function (err, resp, body) {
  if (err) {
    console.log('Error!');
  } else {
    console.log('URL: ' + body);
  }
});
var form = req.form();
form.append('file', toBuffer(file.data), {
  filename: file.name,
  contentType: file.type
});

let double = 1.5 
let string = double.description

update Xcode 7.1 • Swift 2.1:

Now Double is also convertible to String so you can simply use it as you wish:

let double = 1.5
let doubleString = String(double)   // "1.5"

Swift 3 or later we can extend LosslessStringConvertible and make it generic

Xcode 11.3 • Swift 5.1 or later

extension LosslessStringConvertible { 
    var string: String { .init(self) } 
}

let double = 1.5 
let string = double.string  //  "1.5"

For a fixed number of fraction digits we can extend FloatingPoint protocol:

extension FloatingPoint where Self: CVarArg {
    func fixedFraction(digits: Int) -> String {
        .init(format: "%.*f", digits, self)
    }
}

If you need more control over your number format (minimum and maximum fraction digits and rounding mode) you can use NumberFormatter:

extension Formatter {
    static let number = NumberFormatter()
}

extension FloatingPoint {
    func fractionDigits(min: Int = 2, max: Int = 2, roundingMode: NumberFormatter.RoundingMode = .halfEven) -> String {
        Formatter.number.minimumFractionDigits = min
        Formatter.number.maximumFractionDigits = max
        Formatter.number.roundingMode = roundingMode
        Formatter.number.numberStyle = .decimal
        return Formatter.number.string(for: self) ?? ""
    }
}

2.12345.fractionDigits()                                    // "2.12"
2.12345.fractionDigits(min: 3, max: 3, roundingMode: .up)   // "2.124"

to scroll till particular element from the message box top checkout the following demo:

https://jsfiddle.net/6smajv0t/

function scrollToBottom(){_x000D_
 const messages = document.getElementById('messages');_x000D_
 const messagesid = document.getElementById('messagesid');  _x000D_
 messages.scrollTop = messagesid.offsetTop - 10;_x000D_
}_x000D_
_x000D_
scrollToBottom();_x000D_
setInterval(scrollToBottom, 1000);

#messages {_x000D_
  height: 200px;_x000D_
  overflow-y: auto;_x000D_
}

<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>_x000D_
<div id="messages">_x000D_
  <div class="message">_x000D_
    Hello world1_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world2_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world3_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world4_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world5_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world7_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world8_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world9_x000D_
  </div>_x000D_
  <div class="message" >_x000D_
    Hello world10_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world11_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world12_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world13_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world14_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world15_x000D_
  </div>_x000D_
  <div class="message" id="messagesid">_x000D_
    Hello world16 here_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world17_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world18_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world19_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world20_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world21_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world22_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world23_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world24_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world25_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world26_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world27_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world28_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world29_x000D_
  </div>_x000D_
  <div class="message">_x000D_
    Hello world30_x000D_
  </div>_x000D_
</div>

The table normally contains multiple rows. Use a loop and use row.Field<string>(0) to access the value of each row.

foreach(DataRow row in dt.Rows)
{
    string file = row.Field<string>("File");
}

You can also access it via index:

foreach(DataRow row in dt.Rows)
{
    string file = row.Field<string>(0);
}

If you expect only one row, you can also use the indexer of DataRowCollection:

string file = dt.Rows[0].Field<string>(0); 

Since this fails if the table is empty, use dt.Rows.Count to check if there is a row:

if(dt.Rows.Count > 0)
    file = dt.Rows[0].Field<string>(0);

You possibly do not have create permissions to the folder. So WinSCP fails to create a temporary file for the transfer.

You have two options:

• Grant write permissions to the folder to the user or group you log in with (myuser), or change the ownership of the folder to the user, or

• Disable a transfer to temporary file.

  In Preferences, go to Transfer > Endurance page and in Enable transfer resume/transfer to temporary file name for select Disable:

  

If you need to sync files between two remote nodes via ansible you can use this:

- name: synchronize between nodes
  environment:
    RSYNC_PASSWORD: "{{ input_user_password_if_needed }}"
  synchronize:
    src: rsync://user@remote_server:/module/
    dest: /destination/directory/
    // if needed
    rsync_opts:
       - "--include=what_needed"
       - "--exclude=**/**"
    mode: pull
    delegate_to: "{{ inventory_hostname }}"

when on remote_server you need to startup rsync with daemon mode. Simple example:

pid file = /var/run/rsyncd.pid
lock file = /var/run/rsync.lock
log file = /var/log/rsync.log
port = port

[module]
path = /path/to/needed/directory/
uid = nobody
gid = nobody
read only = yes
list = yes
auth users = user
secrets file = /path/to/secret/file

just type in your browser CORS add in firefox Then download this and install on browser finally you found top right side one Core spell to toggle that green for enable and red for not enable

I faced this issue when I was tring to link a locally created repo with a blank repo on github. Initially I was trying git remote set-url but I had to do git remote add instead.

git remote add origin https://github.com/VijayNew/NewExample.git

Try any of these

valof = moment().valueOf();            // xxxxxxxxxxxxx
getTime = moment().toDate().getTime(); // xxxxxxxxxxxxx
unixTime =  moment().unix();           // xxxxxxxxxx
formatTimex =  moment().format('x');   // xxxxxxxxxx
unixFormatX = moment().format('X');    // xxxxxxxxxx

My answer is WRT python 2.6.2.

import commands

status, output = commands.getstatusoutput("curl -H \"Content-Type:application/json\" -k -u (few other parameters required) -X GET https://example.org -s")

print output

I apologize for not providing the required parameters 'coz it's confidential.

Is this a simple eclipse java project without maven etc? In that case you will need to put the log4j2.xml file under src folder in order to be able to find it on the classpath. If you use maven put it under src/main/resources or src/test/resources

Combining all answers above, you can write reusable code with BaseEntity:

@Data
@NoArgsConstructor
@MappedSuperclass
public abstract class BaseEntity {

  @Transient
  public static final Sort SORT_BY_CREATED_AT_DESC = 
                        Sort.by(Sort.Direction.DESC, "createdAt");

  @Id
  private Long id;
  private LocalDateTime createdAt;
  private LocalDateTime updatedAt;

  @PrePersist
  void prePersist() {
    this.createdAt = LocalDateTime.now();
  }

  @PreUpdate
  void preUpdate() {
    this.updatedAt = LocalDateTime.now();
  }
}

DAO object overloads findAll method - basically, still uses findAll()

public interface StudentDAO extends CrudRepository<StudentEntity, Long> {

  Iterable<StudentEntity> findAll(Sort sort);

}

StudentEntity extends BaseEntity which contains repeatable fields (maybe you want to sort by ID, as well)

@Getter
@Setter
@FieldDefaults(level = AccessLevel.PRIVATE)
@Entity
class StudentEntity extends BaseEntity {

  String firstName;
  String surname;

}

Finally, the service and usage of SORT_BY_CREATED_AT_DESC which probably will be used not only in the StudentService.

@Service
class StudentService {

  @Autowired
  StudentDAO studentDao;

  Iterable<StudentEntity> findStudents() {
    return this.studentDao.findAll(SORT_BY_CREATED_AT_DESC);
  }
}

In PLSQL block, columns of select statements must be assigned to variables, which is not the case in SQL statements.

The second BEGIN's SQL statement doesn't have INTO clause and that caused the error.

DECLARE
   PROD_ROW_ID   VARCHAR (10) := NULL;
   VIS_ROW_ID    NUMBER;
   DSC           VARCHAR (512);
BEGIN
   SELECT ROW_ID
     INTO VIS_ROW_ID
     FROM SIEBEL.S_PROD_INT
    WHERE PART_NUM = 'S0146404';

   BEGIN
      SELECT    RTRIM (VIS.SERIAL_NUM)
             || ','
             || RTRIM (PLANID.DESC_TEXT)
             || ','
             || CASE
                   WHEN PLANID.HIGH = 'TEST123'
                   THEN
                      CASE
                         WHEN TO_DATE (PROD.START_DATE) + 30 > SYSDATE
                         THEN
                            'Y'
                         ELSE
                            'N'
                      END
                   ELSE
                      'N'
                END
             || ','
             || 'GB'
             || ','
             || RTRIM (TO_CHAR (PROD.START_DATE, 'YYYY-MM-DD'))
        INTO DSC
        FROM SIEBEL.S_LST_OF_VAL PLANID
             INNER JOIN SIEBEL.S_PROD_INT PROD
                ON PROD.PART_NUM = PLANID.VAL
             INNER JOIN SIEBEL.S_ASSET NETFLIX
                ON PROD.PROD_ID = PROD.ROW_ID
             INNER JOIN SIEBEL.S_ASSET VIS
                ON VIS.PROM_INTEG_ID = PROD.PROM_INTEG_ID
             INNER JOIN SIEBEL.S_PROD_INT VISPROD
                ON VIS.PROD_ID = VISPROD.ROW_ID
       WHERE     PLANID.TYPE = 'Test Plan'
             AND PLANID.ACTIVE_FLG = 'Y'
             AND VISPROD.PART_NUM = VIS_ROW_ID
             AND PROD.STATUS_CD = 'Active'
             AND VIS.SERIAL_NUM IS NOT NULL;
   END;
END;
/

References

http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/static.htm#LNPLS00601 http://docs.oracle.com/cd/B19306_01/appdev.102/b14261/selectinto_statement.htm#CJAJAAIG http://pls-00428.ora-code.com/

It's not possible to access camera of your development machine to be used as simulator camera. Camera functionality is not available in any iOS version and any Simulator. You will have to use device for testing camera purpose.

That's one of the few legitimate jobs for cat:

openssl verify -verbose -CAfile <(cat Intermediate.pem RootCert.pem) UserCert.pem

Update:

As Greg Smethells points out in the comments, this command implicitly trusts Intermediate.pem. I recommend reading the first part of the post Greg references (the second part is specifically about pyOpenSSL and not relevant to this question).

In case the post goes away I'll quote the important paragraphs:

Unfortunately, an "intermediate" cert that is actually a root / self-signed will be treated as a trusted CA when using the recommended command given above:

$ openssl verify -CAfile <(cat geotrust_global_ca.pem rogue_ca.pem) fake_sometechcompany_from_rogue_ca.com.pem fake_sometechcompany_from_rogue_ca.com.pem: OK

It seems openssl will stop verifying the chain as soon as a root certificate is encountered, which may also be Intermediate.pem if it is self-signed. In that case RootCert.pem is not considered. So make sure that Intermediate.pem is coming from a trusted source before relying on the command above.

You can use following ways to setup Spark:

• Building from Source
• Using prebuilt release

Though there are various ways to build Spark from Source.
First I tried building Spark source with SBT but that requires hadoop. To avoid those issues, I used pre-built release.

Instead of Source,I downloaded Prebuilt release for hadoop 2.x version and ran it. For this you need to install Scala as prerequisite.

I have collated all steps here :
How to run Apache Spark on Windows7 in standalone mode

Hope it'll help you..!!!

I use for enter su mode in abd shell

adb shell "su"

Ignore function is used to skip(discard/throw away) characters in the input stream. Ignore file is associated with the file istream. Consider the function below ex: cin.ignore(120,'/n'); the particular function skips the next 120 input character or to skip the characters until a newline character is read.

Generally speaking, you can update your index mapping using the put mapping api (reference here) :

curl -XPUT 'http://localhost:9200/advert_index/_mapping/advert_type' -d '
{
    "advert_type" : {
        "properties" : {

          //your new mapping properties

        }
    }
}
'

It's especially useful for adding new fields. However, in your case, you will try to change the location type, which will cause a conflict and prevent the new mapping from being used.

You could use the put mapping api to add another property containing the location as a lat/lon array, but you won't be able to update the previous location field itself.

Finally, you will have to reindex your data for your new mapping to be taken into account.

The best solution would really be to create a new index.

If your problem with creating another index is downtime, you should take a look at aliases to make things go smoothly.

Here is a very simple way available in current Swiftmailer. Most of the other answers are old and reinvent the wheel.

As per Swiftmailer documentation: https://swiftmailer.symfony.com/docs/messages.html#quick-reference

use Egulias\EmailValidator\EmailValidator;
use Egulias\EmailValidator\Validation\RFCValidation;

$validator = new EmailValidator();
$validator->isValid("[email protected]", new RFCValidation()); //true

This is by far the simplest and most robust approach, imo. Just install via Composer the Egulias\EmailValidator library which should already be brought in as a dependency of SwiftMailer anyway.

Do not use

interface EnumServiceGetOrderBy {
    [index: number]: { id: number; label: string; key: any };
}

You will get errors for all the Arrays properties and methods such as splice etc.

The solution is to create an interface that defines an array of another interface (which will define the object)

For example:

interface TopCategoriesProps {
  data: Array<Type>;
}
interface Type {
  category: string;
  percentage: number;
}

I am looking for this kind of solution for my self as well. I found reference in terms aggregation.

So, according to that following is the proper solution.

{
"aggs" : {
    "langs" : {
        "terms" : { "field" : "language",  
                    "size" : 500 }
    }
}}

But if you ran into following error:

"error": {
        "root_cause": [
            {
                "type": "illegal_argument_exception",
                "reason": "Fielddata is disabled on text fields by default. Set fielddata=true on [fastest_method] in order to load fielddata in memory by uninverting the inverted index. Note that this can however use significant memory. Alternatively use a keyword field instead."
            }
        ]}

In that case, you have to add "KEYWORD" in the request, like following:

   {
    "aggs" : {
        "langs" : {
            "terms" : { "field" : "language.keyword",  
                        "size" : 500 }
        }
    }}

I opened "Passwords and Keys" application in my Unity and removed unwanted keys from Secure Keys -> OpenSSH keys And they automatically had been removed from ssh-agent -l as well.

If you simply want to go to another page, then what you might need is a link that looks like a button with a href like so:

<a href="/#/somepage.html" class="button">Back to Listings</a>

Hope this helps.

Pickling will serialize your list (convert it, and it's entries to a unique byte string), so you can save it to disk. You can also use pickle to retrieve your original list, loading from the saved file.

So, first build a list, then use pickle.dump to send it to a file...

Python 3.4.1 (default, May 21 2014, 12:39:51) 
[GCC 4.2.1 Compatible Apple LLVM 5.0 (clang-500.2.79)] on darwin
Type "help", "copyright", "credits" or "license" for more information.
>>> mylist = ['I wish to complain about this parrot what I purchased not half an hour ago from this very boutique.', "Oh yes, the, uh, the Norwegian Blue...What's,uh...What's wrong with it?", "I'll tell you what's wrong with it, my lad. 'E's dead, that's what's wrong with it!", "No, no, 'e's uh,...he's resting."]
>>> 
>>> import pickle
>>> 
>>> with open('parrot.pkl', 'wb') as f:
...   pickle.dump(mylist, f)
... 
>>> 

Then quit and come back later… and open with pickle.load...

Python 3.4.1 (default, May 21 2014, 12:39:51) 
[GCC 4.2.1 Compatible Apple LLVM 5.0 (clang-500.2.79)] on darwin
Type "help", "copyright", "credits" or "license" for more information.
>>> import pickle
>>> with open('parrot.pkl', 'rb') as f:
...   mynewlist = pickle.load(f)
... 
>>> mynewlist
['I wish to complain about this parrot what I purchased not half an hour ago from this very boutique.', "Oh yes, the, uh, the Norwegian Blue...What's,uh...What's wrong with it?", "I'll tell you what's wrong with it, my lad. 'E's dead, that's what's wrong with it!", "No, no, 'e's uh,...he's resting."]
>>>

If you want to set this up once and use it everywhere, just configure your own middleware. When you are setting up your app, use the following to define a new function on the response object:

app.use((req, res, next) => {
  res.show = (name) => {
    res.sendFile(`/public/${name}`, {root: __dirname});
  };
  next();
});

Then use it as follows:

app.get('/demo', (req, res) => {
  res.show("index1.html");
});

In fact, this is a "how to" subject. So, here is the reference implementation:

    public class BOX
    {
        double height, length, breadth;

        public static bool operator == (BOX b1, BOX b2)
        {
            if ((object)b1 == null)
                return (object)b2 == null;

            return b1.Equals(b2);
        }

        public static bool operator != (BOX b1, BOX b2)
        {
            return !(b1 == b2);
        }

        public override bool Equals(object obj)
        {
            if (obj == null || GetType() != obj.GetType())
                return false;

            var b2 = (BOX)obj;
            return (length == b2.length && breadth == b2.breadth && height == b2.height);
        }

        public override int GetHashCode()
        {
            return height.GetHashCode() ^ length.GetHashCode() ^ breadth.GetHashCode();
        }
    }

REF: https://msdn.microsoft.com/en-us/library/336aedhh(v=vs.100).aspx#Examples

UPDATE: the cast to (object) in the operator == implementation is important, otherwise, it would re-execute the operator == overload, leading to a stackoverflow. Credits to @grek40.

This (object) cast trick is from Microsoft String == implementaiton. SRC: https://github.com/Microsoft/referencesource/blob/master/mscorlib/system/string.cs#L643

This page from Microsoft's Excel VBA documentation helped me: https://docs.microsoft.com/en-us/office/vba/api/excel.xlpastetype

It gives a bunch of options to customize how you paste. For instance, you could xlPasteAll (probably what you're looking for), or xlPasteAllUsingSourceTheme, or even xlPasteAllExceptBorders.

I have looked at the above answers and have mixed together this version which works for me:

function getFilesFromPath(path, extension) {
    let files = fs.readdirSync( path );
    return files.filter( file => file.match(new RegExp(`.*\.(${extension})`, 'ig')));
}

console.log(getFilesFromPath("./testdata", ".txt"));

This test will return an array of filenames from the files found in the folder at the path ./testdata. Working on node version 8.11.3.

Working solution for heroku is here http://kennethjiang.blogspot.com/2014/07/set-up-cors-in-cloudfront-for-custom.html (quotes follow):

Below is exactly what you can do if you are running your Rails app in Heroku and using Cloudfront as your CDN. It was tested on Ruby 2.1 + Rails 4, Heroku Cedar stack.

Add CORS HTTP headers (Access-Control-*) to font assets

• Add gem font_assets to Gemfile .
• bundle install
• Add config.font_assets.origin = '*' to config/application.rb . If you want more granular control, you can add different origin values to different environment, e.g., config/config/environments/production.rb
• curl -I http://localhost:3000/assets/your-custom-font.ttf
• Push code to Heroku.

Configure Cloudfront to forward CORS HTTP headers

In Cloudfront, select your distribution, under "behavior" tab, select and edit the entry that controls your fonts delivery (for most simple Rails app you only have 1 entry here). Change Forward Headers from "None" to "Whilelist". And add the following headers to whitelist:

Access-Control-Allow-Origin
Access-Control-Allow-Methods
Access-Control-Allow-Headers
Access-Control-Max-Age

Save it and that's it!

Caveat: I found that sometimes Firefox wouldn't not refresh the fonts even if CORS error is gone. In this case keep refreshing the page a few times to convince Firefox that you are really determined.