[docker] How to run shell script on host from docker container?

How to control host from docker container?

For example, how to execute copied to host bash script?

This question is related to docker

The answer is


As Marcus reminds, docker is basically process isolation. Starting with docker 1.8, you can copy files both ways between the host and the container, see the doc of docker cp

https://docs.docker.com/reference/commandline/cp/

Once a file is copied, you can run it locally


To expand on user2915097's response:

The idea of isolation is to be able to restrict what an application/process/container (whatever your angle at this is) can do to the host system very clearly. Hence, being able to copy and execute a file would really break the whole concept.

Yes. But it's sometimes necessary.

No. That's not the case, or Docker is not the right thing to use. What you should do is declare a clear interface for what you want to do (e.g. updating a host config), and write a minimal client/server to do exactly that and nothing more. Generally, however, this doesn't seem to be very desirable. In many cases, you should simply rethink your approach and eradicate that need. Docker came into an existence when basically everything was a service that was reachable using some protocol. I can't think of any proper usecase of a Docker container getting the rights to execute arbitrary stuff on the host.


If you are not worried about security and you're simply looking to start a docker container on the host from within another docker container like the OP, you can share the docker server running on the host with the docker container by sharing it's listen socket.

Please see https://docs.docker.com/engine/security/security/#docker-daemon-attack-surface and see if your personal risk tolerance allows this for this particular application.

You can do this by adding the following volume args to your start command

docker run -v /var/run/docker.sock:/var/run/docker.sock ...

or by sharing /var/run/docker.sock within your docker compose file like this:

version: '3'

services:
   ci:
      command: ...
      image: ...
      volumes
         - /var/run/docker.sock:/var/run/docker.sock

When you run the docker start command within your docker container, the docker server running on your host will see the request and provision the sibling container.

credit: http://jpetazzo.github.io/2015/09/03/do-not-use-docker-in-docker-for-ci/


I have a simple approach.

Step 1: Mount /var/run/docker.sock:/var/run/docker.sock (So you will be able to execute docker commands inside your container)

Step 2: Execute this below inside your container. The key part here is (--network host as this will execute from host context)

docker run -i --rm --network host -v /opt/test.sh:/test.sh alpine:3.7 sh /test.sh

test.sh should contain the some commands (ifconfig, netstat etc...) whatever you need. Now you will be able to get host context output.


docker run --detach-keys="ctrl-p" -it -v /:/mnt/rootdir --name testing busybox
# chroot /mnt/rootdir
# 

You can use the pipe concept, but use a file on the host and fswatch to accomplish the goal to execute a script on the host machine from a docker container. Like so (Use at your own risk):

#! /bin/bash

touch .command_pipe
chmod +x .command_pipe

# Use fswatch to execute a command on the host machine and log result
fswatch -o --event Updated .command_pipe | \
            xargs -n1 -I "{}"  .command_pipe >> .command_pipe_log  &

 docker run -it --rm  \
   --name alpine  \
   -w /home/test \
   -v $PWD/.command_pipe:/dev/command_pipe \
   alpine:3.7 sh

rm -rf .command_pipe
kill %1

In this example, inside the container send commands to /dev/command_pipe, like so:

/home/test # echo 'docker network create test2.network.com' > /dev/command_pipe

On the host, you can check if the network was created:

$ docker network ls | grep test2
8e029ec83afe        test2.network.com                            bridge              local

Write a simple server python server listening on a port (say 8080), bind the port -p 8080:8080 with the container, make a HTTP request to localhost:8080 to ask the python server running shell scripts with popen, run a curl or writing code to make a HTTP request curl -d '{"foo":"bar"}' localhost:8080

#!/usr/bin/python
from BaseHTTPServer import BaseHTTPRequestHandler,HTTPServer
import subprocess
import json

PORT_NUMBER = 8080

# This class will handles any incoming request from
# the browser 
class myHandler(BaseHTTPRequestHandler):
        def do_POST(self):
                content_len = int(self.headers.getheader('content-length'))
                post_body = self.rfile.read(content_len)
                self.send_response(200)
                self.end_headers()
                data = json.loads(post_body)

                # Use the post data
                cmd = "your shell cmd"
                p = subprocess.Popen(cmd, stdout=subprocess.PIPE, shell=True)
                p_status = p.wait()
                (output, err) = p.communicate()
                print "Command output : ", output
                print "Command exit status/return code : ", p_status

                self.wfile.write(cmd + "\n")
                return
try:
        # Create a web server and define the handler to manage the
        # incoming request
        server = HTTPServer(('', PORT_NUMBER), myHandler)
        print 'Started httpserver on port ' , PORT_NUMBER

        # Wait forever for incoming http requests
        server.serve_forever()

except KeyboardInterrupt:
        print '^C received, shutting down the web server'
        server.socket.close()

Used a named pipe. On the host os, create a script to loop and read commands, and then you call eval on that.

Have the docker container read to that named pipe.

To be able to access the pipe, you need to mount it via a volume.

This is similar to the SSH mechanism (or a similar socket based method), but restricts you properly to the host device, which is probably better. Plus you don't have to be passing around authentication information.

My only warning is to be cautious about why you are doing this. It's totally something to do if you want to create a method to self upgrade with user input or whatever, but you probably don't want to call a command to get some config data, as the proper way would be to pass that in as args/volume into docker. Also be cautious about the fact that you are evaling, so just give the permission model a thought.

Some of.the other answers such as running a script.under a volume won't work generically since they won't have access to the full system resources, but it might be more appropriate depending on your usage.


My laziness led me to find the easiest solution that wasn't published as an answer here.

It is based on the great article by luc juggery.

All you need to do in order to gain a full shell to your linux host from within your docker container is:

docker run --privileged --pid=host -it alpine:3.8 \
nsenter -t 1 -m -u -n -i sh

Explanation:

--privileged : grants additional permissions to the container, it allows the container to gain access to the devices of the host (/dev)

--pid=host : allows the containers to use the processes tree of the Docker host (the VM in which the Docker daemon is running) nsenter utility: allows to run a process in existing namespaces (the building blocks that provide isolation to containers)

nsenter (-t 1 -m -u -n -i sh) allows to run the process sh in the same isolation context as the process with PID 1. The whole command will then provide an interactive sh shell in the VM

This setup has major security implications and should be used with cautions (if any).


The solution I use is to connect to the host over SSH and execute the command like this:

ssh -l ${USERNAME} ${HOSTNAME} "${SCRIPT}"

UPDATE

As this answer keeps getting up votes, I would like to remind (and highly recommend), that the account which is being used to invoke the script should be an account with no permissions at all, but only executing that script as sudo (that can be done from sudoers file).


This answer is just a more detailed version of Bradford Medeiros's solution, which for me as well turned out to be the best answer, so the credit goes to him.

In his answer, he explains WHAT to do (named pipes) but not exactly HOW to do it.

I have to admit I didn't know what are named pipes at the time I read his solution. So I struggled to implement it (while it's actually really simple), but I did succeed, so I'm happy to help by explaining how I did it. So the point of my answer is just detailing the commands you need to run in order to get it working, but again, credit goes to him.

PART 1 - Testing the named pipe concept without docker

On the main host, chose the folder where you want to put your named pipe file, for instance /path/to/pipe/ and a pipe name, for instance mypipe, and then run:

mkfifo /path/to/pipe/mypipe

The pipe is created. Type

ls -l /path/to/pipe/mypipe 

And check the access rights start with "p", such as

prw-r--r-- 1 root root 0 mypipe

Now run:

tail -f /path/to/pipe/mypipe

The terminal is now waiting for data to be sent into this pipe

Now open another terminal window.

And then run:

echo "hello world" > /path/to/pipe/mypipe

Check the first terminal (the one with tail -f), it should display "hello world"

PART 2 - Run commands through the pipe

On the host container, instead of running tail -f which just outputs whatever is sent as input, run this command that will execute it as commands:

eval "$(cat /path/to/pipe/mypipe)"

Then, from the other terminal, try running:

echo "ls -l" > /path/to/pipe/mypipe

Go back to the first terminal and you should see the result of the ls -l command.

PART 3 - Make it listen forever

You may have noticed that in the previous part, right after ls -l output is displayed, it stops listening for commands.

Instead of eval "$(cat /path/to/pipe/mypipe)", run:

while true; do eval "$(cat /path/to/pipe/mypipe)"; done

(you can nohup that)

Now you can send unlimited number of commands one after the other, they will all be executed, not just the first one.

PART 4 - Make it work even when reboot happens

The only caveat is if the host has to reboot, the "while" loop will stop working.

To handle reboot, here what I've done:

Put the while true; do eval "$(cat /path/to/pipe/mypipe)"; done in a file called execpipe.sh with #!/bin/bash header

Don't forget to chmod +x it

Add it to crontab by running

crontab -e

And then adding

@reboot /path/to/execpipe.sh

At this point, test it: reboot your server, and when it's back up, echo some commands into the pipe and check if they are executed. Of course, you aren't able to see the output of commands, so ls -l won't help, but touch somefile will help.

Another option is to modify the script to put the output in a file, such as:

while true; do eval "$(cat /path/to/pipe/mypipe)" &> /somepath/output.txt; done

Now you can run ls -l and the output (both stdout and stderr using &> in bash) should be in output.txt.

PART 5 - Make it work with docker

If you are using both docker compose and dockerfile like I do, here is what I've done:

Let's assume you want to mount the mypipe's parent folder as /hostpipe in your container

Add this:

VOLUME /hostpipe

in your dockerfile in order to create a mount point

Then add this:

volumes:
   - /path/to/pipe:/hostpipe

in your docker compose file in order to mount /path/to/pipe as /hostpipe

Restart your docker containers.

PART 6 - Testing

Exec into your docker container:

docker exec -it <container> bash

Go into the mount folder and check you can see the pipe:

cd /hostpipe && ls -l

Now try running a command from within the container:

echo "touch this_file_was_created_on_main_host_from_a_container.txt" > /hostpipe/mypipe

And it should work!

WARNING: If you have an OSX (Mac OS) host and a Linux container, it won't work (explanation here https://stackoverflow.com/a/43474708/10018801 and issue here https://github.com/docker/for-mac/issues/483 ) because the pipe implementation is not the same, so what you write into the pipe from Linux can be read only by a Linux and what you write into the pipe from Mac OS can be read only by a Mac OS (this sentence might not be very accurate, but just be aware that a cross-platform issue exists).

For instance, when I run my docker setup in DEV from my Mac OS computer, the named pipe as explained above does not work. But in staging and production, I have Linux host and Linux containers, and it works perfectly.

PART 7 - Example from Node.JS container

Here is how I send a command from my node js container to the main host and retrieve the output:

const pipePath = "/hostpipe/mypipe"
const outputPath = "/hostpipe/output.txt"
const commandToRun = "pwd && ls-l"

console.log("delete previous output")
if (fs.existsSync(outputPath)) fs.unlinkSync(outputPath)

console.log("writing to pipe...")
const wstream = fs.createWriteStream(pipePath)
wstream.write(commandToRun)
wstream.close()

console.log("waiting for output.txt...") //there are better ways to do that than setInterval
let timeout = 10000 //stop waiting after 10 seconds (something might be wrong)
const timeoutStart = Date.now()
const myLoop = setInterval(function () {
    if (Date.now() - timeoutStart > timeout) {
        clearInterval(myLoop);
        console.log("timed out")
    } else {
        //if output.txt exists, read it
        if (fs.existsSync(outputPath)) {
            clearInterval(myLoop);
            const data = fs.readFileSync(outputPath).toString()
            if (fs.existsSync(outputPath)) fs.unlinkSync(outputPath) //delete the output file
            console.log(data) //log the output of the command
        }
    }
}, 300);