Anybody seen this error and know what to do?
I'm using the terminal, I'm in the root, the GitHub repository exists and I don't know what to do now.
> git push -u origin master
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
The answer is
this worked for me:
1- remove all origins
git remote rm origin
(cf. https://www.kernel.org/pub/software/scm/git/docs/git-remote.html)
*remote : "Manage the set of repositories ("remotes") whose branches you track.
*rm : "Remove the remote named . All remote-tracking branches and configuration settings for the remote are removed."
2- check all has been removed :
git remote -v
3- add new origin master
git remote add origin [email protected]:YOUR-GIT/YOUR-REPO.git
that's all folks!
Once scenario where this will happen is when you follow GitHub instructions after you create your repository. Git will instruct you to add your remote with something like this.
git remote add origin [email protected]:<user>/<project>.git
Replace what's in <> with values related to your account.
The solution is to remove the .git suffix. Add the remote as follows:
git remote add origin [email protected]:<user>/<project>
Did you create a config file in your ~/.ssh directory? It should have contents like these:
Host github.com
IdentityFile ~/.ssh/github_rsa
Assuming that you created an ssh key named github_rsa
and uploaded it to GitHub...
NOTE: You must follow this way of explicit configuration if you have more than 1 key (2 and more) in your ~/.ssh/ directory. If you don't specify key this way, then first key in order is taken and used for github authentication, so it depends on the key file name then.
I found this page while searching for a solution to a similar error message using git pull on a remote host:
$ git pull
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
I was connected from my local machine to the remote host via ssh -AY remote_hostname. This is not a solution to OP's question, but useful for others who come across this page, so posting it here.
Note that in my case, git pull works fine on my local machine (that is, ssh key had been set up, and added to the GitHub account, etc). I solved my issue by adding this to ~/.ssh/config on my laptop:
Host *
ForwardAgent yes
I then re-connected to the remote host with ssh -AY remote_hostname, and git pull now worked. The change in the config enables to forward my ssh keypair from my local machine to any host. The -A option to ssh actually forwards it in that ssh session. See more details here.
Make sure ssh-add -l shows a fingerprint of an SSH key that's present in the list of SSH keys in your Github account.
If the output is empty, but you know you have a private SSH key that works with your github account, run ssh-add on this key (found in ~/.ssh. It's named id_rsa by default, so you'll likely run ssh-add id_rsa).
Else, follow these instructions to generate an SSH key pair .
In case you are not accessing your own repository, or cloning inside a cloned repository (using some "git submodule... " commands):
In the home directory of your repository:
$ ls -a
1. Open ".gitmodules", and you will find something like this:
[submodule "XXX"]
path = XXX
url = [email protected]:YYY/XXX.git
Change the last line to be the HTTPS of the repository you need to pull:
[submodule "XXX"]
path = XXX
https://github.com/YYY/XXX.git
Save ".gitmodules", and run the command for submodules, and ".git" will be updated.
2. Open ".git", go to "config" file, and you will find something like this:
[core]
repositoryformatversion = 0
filemode = true
bare = false
logallrefupdates = true
ignorecase = true
precomposeunicode = true
[remote "origin"]
url = https://github.com/YYY/XXX.git
fetch = +refs/heads/*:refs/remotes/origin/*
[branch "master"]
remote = origin
merge = refs/heads/master
[submodule "XXX"]
url = [email protected]:YYY/XXX.git
Change the last line to be the HTTPS of the repository you need to pull:
url = https://github.com/YYY/XXX.git
So, in this case, the main problem is simply with the url. HTTPS of any repository can be found now on top of the repository page.
I had 2 Github identity files loaded in the ssh agent. My personal key and another for a client project.
I removed the key that was causing confusion:
ssh-add -d id_rsa_github_somekey
This Worked for me
There are 2 options in github - HTTPS/SSH
I had selected SSH by mistake due to which the error was occuring -_-
Switch it to HTTPS and then copy the url again and try :)
you can use Https url to login
i guess you are trying to login with ssh url when you say git push if it as asking only password consider you are connecting through ssh.better you use http url.
I had the same issue with AWS CodeCommit. All was working on one laptop but it wasn't on the other. The solution was to remove 'PreferredAuthentications publickey' line from .ssh/config in the section with the AWS config.
Go to your GitHub account dashboard, find your project repository, click Settings tab - under Deploy keys you'll have to add your SSH key. Open Terminal and type:
cat ~/.ssh/id_rsa.pub | pbcopy
This will copy the key from your id_rsa.pub file. So just go back to GitHub dashboard, paste it, click Add Key and that's it.
The same solution applies to Bitbucket accounts.
you can try this way...
choose another links
I know about this problem. After add ssh key, add you ssh key to ssh agent too (from official docs)
ssh-agent -s
ssh-add ~/.ssh/id_rsa
After it all work fine, git can view proper key, before couldn't.
I was getting this error. Turns out I had just upgraded OSX to Sierra and my old key was no longer registered.
At first I thought it was "Upgrading to macOS Sierra will break your SSH keys and lock you out of your own servers"
But I had sidestepped that one. Turns out I just had to re-register my existing key:
ssh-add -K
And type the passphrase... done!
I was getting same error during 'git push'. In client side I had two origin and master. I removed one, then it worked fine.
Issue solved if you change the ssh access to https access to the remote repository:
git remote set-url origin https_link_to_repository
git push -u origin master
If you are using the GitHub for Mac UI, check preferences to make sure you're logged in.
Assuming you are connecting GitHub over SSH, you can run below command to confirm this.
$git config --get remote.origin.url
If you get a result has following format [email protected]:xxx/xxx.github.com.git, then you should do the following.
Generate a SSH key(or use existing one). if you had one, you just need to add your key to the ssh-agent (step 2)and to your GitHub account(step 3).
below are for those who don't have SSH key.
Step 1 Generating public/private rsa key pair.
$ssh-keygen -t rsa -b 4096 -C "[email protected]"
You'll be asked to confirm where to save the SSH key and what passphrase you want to use.
Step 2 Add your key to the ssh-agent
Ensure ssh-agent is enabled
$eval "$(ssh-agent -s)"Add your SSH key to the ssh-agent:
$ssh-add ~/.ssh/id_rsa
Step 3 Add your SSH key to your account
$sudo apt-get install xclip
$xclip -sel clip < ~/.ssh/id_rsa.pub
Then add the copied key to GitHub
Go to Settings->SSH keys(Personal settings side bar)->Add SSH key->fill out form(key is on your clipboard, just use ctrl+v)->Add key
After going through above steps, you should solve the permission problem.
Reference Link: Generating SSH keys.
For me I tried this -
eval "$(ssh-agent -s)"
then I run
ssh-add ~/.ssh/path-to-the-keyfile
and for generating the key you can run
ssh-keygen -t rsa -b 4096 -C "[email protected]"
this will generate the pair of keys (Public and private).
you can store this key to github for more read this Adding a new SSH key to your GitHub account
I hope it will help others :)
You need to generate an SSH key (if you don't have one) and associate the public key with your Github account. See Github's own documentation.
Use the URL for this page when adding GitHub as a remote. it wont cause any such error and push the code
I would like to add some of my findings:
If you are using GitBash, then make sure the SSH key is stored in ~/.ssh/id_rsa.
By Default GitBash searches for ~/.ssh/id_rsaas default path for SSH key.
Even the file name id_rsa matters. If you save your SSH key in another filename or path, it will throw the Permission Denied(publickey)error.
tl;dr
in ~/.ssh/config put
PubkeyAcceptedKeyTypes=+ssh-dss
Scenario
If you are using a version of openSSH > 7, like say on a touchbar MacBook Pro it is ssh -V
OpenSSH_7.4p1, LibreSSL 2.5.0
You also had an older Mac which originally had your key you put onto Github, it's possible that is using an id_dsa key. OpenSSH v7 doesn't put in by default the use of these DSA keys (which include this ssh-dss) , but you can still add it back by putting the following code into your ~/.ssh/config
PubkeyAcceptedKeyTypes=+ssh-dss
Source that worked for me is this Gentoo newsletter
Now you can at least use GitHub and then fix your keys to RSA.
Using Https is fine, run git config --global credential.helper wincred to create a Github credential helper that stores your credentials for you. If this doesn't work, then you need to edit your config file in your .git directory and update the origin to the https url.
See this link for the github docs.
I think i have the best answer for you, your git apps read your id_rsa.pub in root user directory
/home/root/.ssh/id_rsa.pub
That's why your key in /home/your_username/.ssh/id_rsa.pub can't be read by git. So you need to create the key in /home/root/.ssh/
$ sudo su
$ ssh-keygen
$ cd ~/.ssh
$ cat id_rsa.pub
Then copy the key in your github account. It's worked for me. You can try it.
I had the same issue recently. This might help if you need a fix immediately, but this needs to be done every time you re-start your system
From terminal, run : ssh-add ~/.ssh/id_rsa
Enter your system password and that should work.
Another solution :
create the SSH keys, type ssh-keygen -t rsa -C "[email protected]". This will create both id_rsa and id_rsa.pub files.
Add the id_rsa to ssh list on local computer: ssh-add ~/.ssh/id_rsa.
After generating the keys get the pubkey using :
cat ~/.ssh/id_rsa.pub
you will get something like :
cat ~/.ssh/id_rsa.pub
ssh-rsa AAAB3NzaC1yc2EAAAADAQABAAACAQCvMzmFEUPvaA1AFEBH6zGIF3N6pVE2SJv9V1MHgEwk4C7xovdk7Lr4LDoqEcqxgeJftwWQWWVrWWf7q9qCdHTAanH2Q5vx5nZjLB+B7saksehVOPWDR/MOSpVcr5bwIjf8dc8u5S8h24uBlguGkX+4lFJ+zwhiuwJlhykMvs5py1gD2hy+hvOs1Y17JPWhVVesGV3tlmtbfVolEiv9KShgkk3Hq56fyl+QmPzX1jya4TIC3k55FTzwRWBd+IpblbrGlrIBS6hvpHQpgUs47nSHLEHTn0Xmn6Q== [email protected]
copy this key (value) and go to github.com and under the setting (ssh and pgp key) add your public key.
This happened to me. For some reason my origin got messed up without my realizing it:
Check if your settings are still correct
git remote -v
the url needs to be something like ssh://[email protected]/YourDirectory/YourProject.git; if you don't see [email protected], use
git remote set-url origin git://github.com/YourDirectory/YourProject.git
to set it right. Or you could use the github app to check and set the Primary Remote Repository url in the settings panel of your particular repository.
I was using github earlier for one of my php project. While using github, I was using ssh instead of https. I had my machine set up like that and every time I used to commit and push the code, it would ask me my rsa key password.
After some days, I stopped working on the php project and forgot my rsa password. Recently, I started working on a java project and moved to bitbucket. Since, I had forgotten the password and there is no way to recover it I guess, I decided to use the https(recommended) protocol for the new project and got the same error asked in the question.
How I solved it?
Ran this command to tell my git to use https instead of ssh:
git config --global url."https://".insteadOf git://Remove any remote if any
git remote rm originRedo everything from git init to git push and it works!
PS: I also un-installed ssh from my machine during the debug process thinking that, removing it will fix the problem. Yes I know!! :)
Also in ubuntu, even though there was already SSH key entered in settings in BitBucket, I got this problem. The reason was, I was trying the following:
sudo git push origin master
Not sure why, but it got solved by using
git push origin master
No sudo used.
I was having a similar problem to @Batman. However, because I was running this under /usr/local/src/projectname, running without sudo was not an option.
Just add the -E flag to preseve the environment (your ~/.ssh/ path).
$ sudo -E git clone git@your_repo
From man sudo:
-E, --preserve-env Indicates to the security policy that the user wishes to pre- serve their existing environment variables. The security policy may return an error if the user does not have permis- sion to preserve the environment.
Allow write access for the key (identity) and then click Add key
If on Windows check for more details in here.
If you have already created an SSH key and are still getting the error it is because you need to give the user permissions to read and write to the folder you are cloning into. To do this, sudo chmod 777 <your_folder_name_here>".
Of course, this is after you have generated an SSH key and you are still getting this error. Hope this helps future users.
Edit
To add on to this use admin in Windows if you're using the git bash
First, we need to check for existing ssh keys on your computer. Open up Terminal and run:
ls -al ~/.ssh
#or
cd ~/.ssh
ls
and that will lists the files in your .ssh directory
And finally depending on what you see (in my case was):
github_rsa github_rsa.pub known_hosts
Just try setting up your RSA and hopefully that will solve your "git push origin" issues
$ ssh-keygen -lf ~/.ssh/github_rsa.pub
NOTE: RSA certificates are keys-paired so you will have a private and a public certificate, private will not be accessible for you since it belongs to github (in this case) but the public is the one you might be missing when this error happens (at least that was my case, my github account or repo got messed up somehow and i had to "link" the public key, previously generated)
OK there are few solutions to this one, some of them might already been mentioned but just to keep them together:
make sure you keys are present, by default another ~/.ssh/ folder, i.e. id.rsa and id.rsa.pub
make sure the keys have correct permissions, you can run chmod:
chmod 600 ~/.ssh/id_rsa
chmod 644 ~/.ssh/id_rsa.pub
make sure the content of you public key (id_rsa.pub) matches the one uploaded in the remote repository configuration
Finally fix the problems with ssh agent: ssh-add
Some more info: https://itcodehub.blogspot.com/2015/01/ssh-add-problems-with-ssh-agent-and.html
Maybe your ssh-agent is not enable You can try it
- Download git
Install it
Enable ssh-agent
C:\Program Files\Git\cmd
start-ssh-agent
Source: Stackoverflow.com