Loading UITableViewCells from XIBs saves a lot of code, but usually results in horrible scrolling speed (actually, it's not the XIB but the excessive use of UIViews that cause this).

I suggest you take a look at this: Link reference

Now being able to return -> Self in swift helps simplify this a bit. Last confirmed on Swift 5.

extension UIView {
    class func fromNib(named: String? = nil) -> Self {
        let name = named ?? "\(Self.self)"
        guard
            let nib = Bundle.main.loadNibNamed(name, owner: nil, options: nil)
            else { fatalError("missing expected nib named: \(name)") }
        guard
            /// we're using `first` here because compact map chokes compiler on
            /// optimized release, so you can't use two views in one nib if you wanted to
            /// and are now looking at this
            let view = nib.first as? Self
            else { fatalError("view of type \(Self.self) not found in \(nib)") }
        return view
    }
}

If your .xib file and subclass share the same name, you can use:

let view = CustomView.fromNib()

If you have a custom name, use:

let view = CustomView.fromNib(named: "special-case")

NOTE:

If you're getting the error "view of type YourType not found in.." then you haven't set the view's class in the .xib file

Select your view in the .xib file, and press cmd + opt + 4 and in the class input, enter your class

I tried almost everything but could not help,what helped me was disabling SIP(System Integration Protection) n it works,I do not know what happens when and how but system file get confused somewhere and causes this...though there might be risks to disabling this obviously

here is how

1.Power on your Mac and hold down the [command]+[R] keys to access the Recovery Partition.

2.From the Recovery Partition, click Utilities from the menu bar, and then select Terminal.

3.Enter the following command into Terminal and press Enter to execute it: csrutil disable

4.Once the command has executed, exit the Terminal and reboot the Mac. When you log back into OS X, SIP will be disabled.

in swift
NavigationController and pushController you can replace for

present(vc, animated:true , completion: nil)

For swift 3 & 4

let customView = Bundle.main.loadNibNamed("CustomView", owner: nil, options: nil)?.first as? CustomView

MyViewClass *myViewObject = [[[NSBundle mainBundle] loadNibNamed:@"MyViewClassNib" owner:self options:nil] objectAtIndex:0]

I'm using this to initialise the reusable custom views I have.

Note that you can use "firstObject" at the end there, it's a little cleaner. "firstObject" is a handy method for NSArray and NSMutableArray.

Here's a typical example, of loading a xib to use as a table header. In your file YourClass.m

- (UIView *)tableView:(UITableView *)tableView viewForHeaderInSection:(NSInteger)section {
    return [[NSBundle mainBundle] loadNibNamed:@"TopArea" owner:self options:nil].firstObject;
}

Normally, in the TopArea.xib, you would click on File Owner and set the file owner to YourClass. Then actually in YourClass.h you would have IBOutlet properties. In TopArea.xib, you can drag controls to those outlets.

Don't forget that in TopArea.xib, you may have to click on the View itself and drag that to some outlet, so you have control of it, if necessary. (A very worthwhile tip is that when you are doing this for table cell rows, you absolutely have to do that - you have to connect the view itself to the relevant property in your code.)

Are you sure you have a UIView (or subclass) assigned to the "view" property of yourViewController?

Right click on "File Owner" in the left pane of the xib for yourViewController and verify that the "view" outlet is set. If not, set it to a view!

this will definetly fix the Issue

My full example is here, but I will provide a summary below.

Layout

Add a .swift and .xib file each with the same name to your project. The .xib file contains your custom view layout (using auto layout constraints preferably).

Make the swift file the xib file's owner.

Code

Add the following code to the .swift file and hook up the outlets and actions from the .xib file.

import UIKit
class ResuableCustomView: UIView {

    let nibName = "ReusableCustomView"
    var contentView: UIView?

    @IBOutlet weak var label: UILabel!
    @IBAction func buttonTap(_ sender: UIButton) {
        label.text = "Hi"
    }

    required init?(coder aDecoder: NSCoder) {
        super.init(coder: aDecoder)

        guard let view = loadViewFromNib() else { return }
        view.frame = self.bounds
        self.addSubview(view)
        contentView = view
    }

    func loadViewFromNib() -> UIView? {
        let bundle = Bundle(for: type(of: self))
        let nib = UINib(nibName: nibName, bundle: bundle)
        return nib.instantiate(withOwner: self, options: nil).first as? UIView
    }
}

Use it

Use your custom view anywhere in your storyboard. Just add a UIView and set the class name to your custom class name.

For a while Christopher Swasey's approach was the best approach I had found. I asked a couple of the senior devs on my team about it and one of them had the perfect solution! It satisfies every one of the concerns that Christopher Swasey so eloquently addressed and it doesn't require boilerplate subclass code(my main concern with his approach). There is one gotcha, but other than that it is fairly intuitive and easy to implement.

1. Create a custom UIView class in a .swift file to control your xib. i.e. MyCustomClass.swift
2. Create a .xib file and style it as you want. i.e. MyCustomClass.xib
3. Set the File's Owner of the .xib file to be your custom class (MyCustomClass)
4. GOTCHA: leave the class value (under the identity Inspector) for your custom view in the .xib file blank. So your custom view will have no specified class, but it will have a specified File's Owner.
5. Hook up your outlets as you normally would using the Assistant Editor.
   • NOTE: If you look at the Connections Inspector you will notice that your Referencing Outlets do not reference your custom class (i.e. MyCustomClass), but rather reference File's Owner. Since File's Owner is specified to be your custom class, the outlets will hook up and work propery.
6. Make sure your custom class has @IBDesignable before the class statement.
7. Make your custom class conform to the NibLoadable protocol referenced below.
   • NOTE: If your custom class .swift file name is different from your .xib file name, then set the nibName property to be the name of your .xib file.
8. Implement required init?(coder aDecoder: NSCoder) and override init(frame: CGRect) to call setupFromNib() like the example below.
9. Add a UIView to your desired storyboard and set the class to be your custom class name (i.e. MyCustomClass).
10. Watch IBDesignable in action as it draws your .xib in the storyboard with all of it's awe and wonder.

Here is the protocol you will want to reference:

public protocol NibLoadable {
    static var nibName: String { get }
}

public extension NibLoadable where Self: UIView {

    public static var nibName: String {
        return String(describing: Self.self) // defaults to the name of the class implementing this protocol.
    }

    public static var nib: UINib {
        let bundle = Bundle(for: Self.self)
        return UINib(nibName: Self.nibName, bundle: bundle)
    }

    func setupFromNib() {
        guard let view = Self.nib.instantiate(withOwner: self, options: nil).first as? UIView else { fatalError("Error loading \(self) from nib") }
        addSubview(view)
        view.translatesAutoresizingMaskIntoConstraints = false
        view.leadingAnchor.constraint(equalTo: self.safeAreaLayoutGuide.leadingAnchor, constant: 0).isActive = true
        view.topAnchor.constraint(equalTo: self.safeAreaLayoutGuide.topAnchor, constant: 0).isActive = true
        view.trailingAnchor.constraint(equalTo: self.safeAreaLayoutGuide.trailingAnchor, constant: 0).isActive = true
        view.bottomAnchor.constraint(equalTo: self.safeAreaLayoutGuide.bottomAnchor, constant: 0).isActive = true
    }
}

And here is an example of MyCustomClass that implements the protocol (with the .xib file being named MyCustomClass.xib):

@IBDesignable
class MyCustomClass: UIView, NibLoadable {

    @IBOutlet weak var myLabel: UILabel!

    required init?(coder aDecoder: NSCoder) {
        super.init(coder: aDecoder)
        setupFromNib()
    }

    override init(frame: CGRect) {
        super.init(frame: frame)
        setupFromNib()
    }

}

NOTE: If you miss the Gotcha and set the class value inside your .xib file to be your custom class, then it will not draw in the storyboard and you will get a EXC_BAD_ACCESS error when you run the app because it gets stuck in an infinite loop of trying to initialize the class from the nib using the init?(coder aDecoder: NSCoder) method which then calls Self.nib.instantiate and calls the init again.

It seems that the original test case is wrong.

I can confirm that the selector #my_parent_element * works with unbind().

Let's take the following html as an example:

<div id="#my_parent_element">
  <div class="div1">
    <div class="div2">hello</div>
    <div class="div3">my</div>
  </div>
  <div class="div4">name</div>
  <div class="div5">
    <div class="div6">is</div>
    <div class="div7">
      <div class="div8">marco</div>
      <div class="div9">(try and click on any word)!</div>
    </div>
  </div>
</div>
<button class="unbind">Now, click me and try again</button>

And the jquery bit:

$('.div1,.div2,.div3,.div4,.div5,.div6,.div7,.div8,.div9').click(function() {
  alert('hi!');
})
$('button.unbind').click(function() {
  $('#my_parent_element *').unbind('click');
})

You can try it here: http://jsfiddle.net/fLvwbazk/7/

When you alter column datatype you need to change constraint key for every database

  alter table CompanyTransactions drop constraint [df__CompanyTr__Creat__0cdae408];

Just as a addition. You can find the Catalina Paths in

->RUN->RUN CONFIGURATIONS->APACHE TOMCAT->ARGUMENTS

In the VM Arguments the Paths are listed and changeable

from os.path import dirname, join as pjoin
import scipy.io as sio
data_dir = pjoin(dirname(sio.__file__), 'matlab', 'tests', 'data')
mat_fname = pjoin(data_dir, 'testdouble_7.4_GLNX86.mat')
mat_contents = sio.loadmat(mat_fname)

You can use above code to read the default saved .mat file in Python.

While everyone else has suggested the de facto time module, I thought I'd share a different method using matplotlib's pyplot function, pause.

An example

from matplotlib import pyplot as plt
plt.pause(5)    # Pauses the program for 5 seconds

Typically this is used to prevent the plot from disappearing as soon as it is plotted or to make crude animations.

This would save you an import if you already have matplotlib imported.

Maybe someone can use it. Find all files which were modified within a certain time frame recursively, just run:

find . -type f -newermt "2013-06-01" \! -newermt "2013-06-20"

Slightly alternative solution to @jpp's but outputting a YearMonth string:

df['YearMonth'] = pd.to_datetime(df['Date']).apply(lambda x: '{year}-{month}'.format(year=x.year, month=x.month))

res = df.groupby('YearMonth')['Values'].sum()

I know this ticket is old, but I just ran into this issue and I thought I would post what was happening to me and how I resolved it:

In my service I was calling there was a call to another web service. Like a goof, I forgot to make sure that the DNS settings were correct when I published the web service, thus my web service, when published, was trying to call from api.myproductionserver.local, rather than api.myproductionserver.com. It was the backend web service that was causing the timeout.

Anyways, I thought I would pass this along.

I have custom loading. Properties must be defined as:

key.0=value0
key.1=value1
...

Custom loading:

/** Return array from properties file. Array must be defined as "key.0=value0", "key.1=value1", ... */
public List<String> getSystemStringProperties(String key) {

    // result list
    List<String> result = new LinkedList<>();

    // defining variable for assignment in loop condition part
    String value;

    // next value loading defined in condition part
    for(int i = 0; (value = YOUR_PROPERTY_OBJECT.getProperty(key + "." + i)) != null; i++) {
        result.add(value);
    }

    // return
    return result;
}

Sort of:

class some_class {
    static std::vector<std::string> v; // declaration
};

const char *vinit[] = {"one", "two", "three"};

std::vector<std::string> some_class::v(vinit, end(vinit)); // definition

end is just so I don't have to write vinit+3 and keep it up to date if the length changes later. Define it as:

template<typename T, size_t N>
T * end(T (&ra)[N]) {
    return ra + N;
}

If you want not to type class name twice during instantiation like in:

new SomeContainer<SomeType>(SomeType.class);

You can use factory method:

<E> SomeContainer<E> createContainer(Class<E> class); 

Like in:

public class Container<E> {

    public static <E> Container<E> create(Class<E> c) {
        return new Container<E>(c);
    }

    Class<E> c;

    public Container(Class<E> c) {
        super();
        this.c = c;
    }

    public E createInstance()
            throws InstantiationException,
            IllegalAccessException {
        return c.newInstance();
    }

}

select * from user_tables;

(showing all tables)

Warning: This might inflate executable file size a little bit and cost a little runtime performance. IMO, this would be better if golang has such feature like macro or function decorator.

If you want to mock functions without changing its API, the easiest way is to change the implementation a little bit:

func getPage(url string) string {
  if GetPageMock != nil {
    return GetPageMock()
  }

  // getPage real implementation goes here!
}

func downloader() {
  if GetPageMock != nil {
    return GetPageMock()
  }

  // getPage real implementation goes here!
}

var GetPageMock func(url string) string = nil
var DownloaderMock func() = nil

This way we can actually mock one function out of the others. For more convenient we can provide such mocking boilerplate:

// download.go
func getPage(url string) string {
  if m.GetPageMock != nil {
    return m.GetPageMock()
  }

  // getPage real implementation goes here!
}

func downloader() {
  if m.GetPageMock != nil {
    return m.GetPageMock()
  }

  // getPage real implementation goes here!
}

type MockHandler struct {
  GetPage func(url string) string
  Downloader func()
}

var m *MockHandler = new(MockHandler)

func Mock(handler *MockHandler) {
  m = handler
}

In test file:

// download_test.go
func GetPageMock(url string) string {
  // ...
}

func TestDownloader(t *testing.T) {
  Mock(&MockHandler{
    GetPage: GetPageMock,
  })

  // Test implementation goes here!

  Mock(new(MockHandler)) // Reset mocked functions
}

The current Jaql implementation targets large data processing using a Hadoop cluster, so it might be more than you need. However, it runs easily without a Hadoop cluster (but still requires the Hadoop code and its dependencies to get compiled, which are mostly included). A small implementation of Jaql that could be embedded in Javascript and the a browser would be a great addition to the project.

Your examples above are easily written in jaql:

$data = [{"x": 2, "y": 0}, {"x": 3, "y": 1}, {"x": 4, "y": 1}];

$data -> filter $.y > 0 -> transform $.x -> sum(); // 7

$data -> filter $.y > 0 -> transform $.x; // [3,4]

Of course, there's much more too. For example:

// Compute multiple aggregates and change nesting structure:
$data -> group by $y = $.y into { $y, s:sum($[*].x), n:count($), xs:$[*].x}; 
    // [{ "y": 0, "s": 2, "n": 1, "xs": [2]   },
    //  { "y": 1, "s": 7, "n": 2, "xs": [3,4] }]

// Join multiple data sets:
$more = [{ "y": 0, "z": 5 }, { "y": 1, "z": 6 }];
join $data, $more where $data.y == $more.y into {$data, $more};
    // [{ "data": { "x": 2, "y": 0 }, "more": { "y": 0, "z": 5 }},
    //  { "data": { "x": 3, "y": 1 }, "more": { "y": 1, "z": 6 }},
    //  { "data": { "x": 4, "y": 1 }, "more": { "y": 1, "z": 6 }}]

Jaql can be downloaded/discussed at http://code.google.com/p/jaql/

The recent versions of XAMPP for Windows runs PHP 7.x which are NOT compatible with mbcrypt. If you have a package like Laravel that requires mbcrypt, you will need to install an older version of XAMPP. OR, you can run XAMPP with multiple versions of PHP by downloading a PHP package from Windows.PHP.net, installing it in your XAMPP folder, and configuring php.ini and httpd.conf to use the correct version of PHP for your site.

Does it work if I right-click on the link and choose "copy URL"? If not, it's very much not an ideal situation (I very seldom click on a mailto link, preferring to copy the email address and paste it into my mail application or wherever else I need it at a specific point in time).

I used to be fairly paranoid protecting my mail address on-line (UseNet, web and the like), but these days I suspect more "possible targets for spam" are actually generated matching local-parts to domains programmatically. I base this on having, on occasion, gone through my mail server logs. There tends to be quite a few delivery attempts to non-existing addresses (including truncated versions of spam-bait I dangled on UseNet back in the late 90s, when address-scraping was very prevalent).

This was caused because of something like this in my case:

<jsp-config>
    <jsp-property-group>
        <url-pattern>*.jsp</url-pattern>
        <include-prelude>/headerfooter/header.jsp</include-prelude>
        <include-coda>/headerfooter/footer.jsp</include-coda>
    </jsp-property-group>
</jsp-config>

The problem was actually I did not have header.jsp in my project. However the error message was still saying index_jsp was not found.

More methods in java 8:

Using EnumSet with forEach

EnumSet.allOf(Direction.class).forEach(...);

Using Arrays.asList with forEach

Arrays.asList(Direction.values()).forEach(...);

Better way:

encodeURIComponent escapes all characters except the following: alphabetic, decimal digits, - _ . ! ~ * ' ( )

To avoid unexpected requests to the server, you should call encodeURIComponent on any user-entered parameters that will be passed as part of a URI. For example, a user could type "Thyme &time=again" for a variable comment. Not using encodeURIComponent on this variable will give comment=Thyme%20&time=again. Note that the ampersand and the equal sign mark a new key and value pair. So instead of having a POST comment key equal to "Thyme &time=again", you have two POST keys, one equal to "Thyme " and another (time) equal to again.

For application/x-www-form-urlencoded (POST), per http://www.w3.org/TR/html401/interac...m-content-type, spaces are to be replaced by '+', so one may wish to follow a encodeURIComponent replacement with an additional replacement of "%20" with "+".

If one wishes to be more stringent in adhering to RFC 3986 (which reserves !, ', (, ), and *), even though these characters have no formalized URI delimiting uses, the following can be safely used:

function fixedEncodeURIComponent (str) {
  return encodeURIComponent(str).replace(/[!'()]/g, escape).replace(/\*/g, "%2A");
}

Here's a proxy server using request that handles redirects. Use it by hitting your proxy URL http://domain.com:3000/?url=[your_url]

var http = require('http');
var url = require('url');
var request = require('request');

http.createServer(onRequest).listen(3000);

function onRequest(req, res) {

    var queryData = url.parse(req.url, true).query;
    if (queryData.url) {
        request({
            url: queryData.url
        }).on('error', function(e) {
            res.end(e);
        }).pipe(res);
    }
    else {
        res.end("no url found");
    }
}

It can be this:

If you are using cpanel for your website smtp restrictions are problem and cause this error. SMTP Restrictions

Error while sending an email with CodeIgniter

That is the standard way to swap two variables, yes.

At line 5 there is a / missing.

There is a good answer on the differences between ; and / here.

Basically, when running a CREATE block via script, you need to use / to let SQLPlus know when the block ends, since a PL/SQL block can contain many instances of ;.

Given that the only logical difference between the handlers is the value of the button clicked, you can use the this keyword to refer to the element which raised the event and get the val() from that. Try this:

$("button").click(function(e) {
    e.preventDefault();
    $.ajax({
        type: "POST",
        url: "/pages/test/",
        data: { 
            id: $(this).val(), // < note use of 'this' here
            access_token: $("#access_token").val() 
        },
        success: function(result) {
            alert('ok');
        },
        error: function(result) {
            alert('error');
        }
    });
});

You could do this

$("#input").blur(function(){
    if($(this).val() == ''){
        alert('empty'); 
    }
});

http://jsfiddle.net/jasongennaro/Y5P9k/1/

When the input has lost focus that is .blur(), then check the value of the #input.

If it is empty == '' then trigger the alert.

Your script is blocked from executing due to the execution policy.

You need to run PowerShell as administrator and set it on the client PC to Unrestricted. You can do that by calling Invoke with:

Set-ExecutionPolicy Unrestricted

An element can have any number of classNames, however, it can only have one class attribute; only the first one will be read by jQuery.

Using the code you posted, $(".alert-box.warn") will work but $(".alert-box.dead") will not.

 db.getCollection('aj').find({"shapes.color":"red"},{"shapes.$":1})

OUTPUTS

{

   "shapes" : [ 
       {
           "shape" : "circle",
           "color" : "red"
       }
   ]
}

Before you call setContentView(), call setTheme(android.R.style...) and just replace the ... with the theme that you want(Theme, Theme_NoTitleBar, etc.).

Or if your theme is a custom theme, then replace the entire thing, so you get setTheme(yourThemesResouceId)

According to Mozilla MDN: "The X-Forwarded-For (XFF) header is a de-facto standard header for identifying the originating IP address of a client."
They publish clear information in their X-Forwarded-For article.

File API File.getParent or File.getParentFile should return you Directory of file.

Your code should be like :

    File file = new File("c:\\temp\\java\\testfile");
    if(!file.exists()){
        file = file.getParentFile();
    }

You can additionally check your parent file is directory using File.isDirectory API

if(file.isDirectory()){
    System.out.println("file is directory ");
}

Consider creating a function which can return a table and be used in a query.

https://msdn.microsoft.com/en-us/library/ms186755.aspx

The main difference between a function and a procedure is that a function makes no changes to any table. It only returns a value.

In this example I'm creating a query to give me the counts of all the columns in a given table which aren't null or empty.

There are probably many ways to clean this up. But it illustrates a function well.

USE Northwind

CREATE FUNCTION usp_listFields(@schema VARCHAR(50), @table VARCHAR(50))
RETURNS @query TABLE (
    FieldName VARCHAR(255)
    )
BEGIN
    INSERT @query
    SELECT
        'SELECT ''' + @table+'~'+RTRIM(COLUMN_NAME)+'~''+CONVERT(VARCHAR, COUNT(*)) '+
    'FROM '+@schema+'.'+@table+' '+
          ' WHERE isnull("'+RTRIM(COLUMN_NAME)+'",'''')<>'''' UNION'
    FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = @table and TABLE_SCHEMA = @schema
    RETURN
END

Then executing the function with

SELECT * FROM usp_listFields('Employees')

produces a number of rows like:

SELECT 'Employees~EmployeeID~'+CONVERT(VARCHAR, COUNT(*)) FROM dbo.Employees  WHERE isnull("EmployeeID",'')<>'' UNION
SELECT 'Employees~LastName~'+CONVERT(VARCHAR, COUNT(*)) FROM dbo.Employees  WHERE isnull("LastName",'')<>'' UNION
SELECT 'Employees~FirstName~'+CONVERT(VARCHAR, COUNT(*)) FROM dbo.Employees  WHERE isnull("FirstName",'')<>'' UNION

The first column of output is the index of each item in enumm and the second one is its keys. If you want to iterate your dictionary then use .items():

for k, v in enumm.items():
    print(k, v)

And the output should look like:

0 1
1 2
2 3
4 4 
5 5
6 6
7 7

Here is a good solution:

if (variable == (int)variable) {
    //logic
}

It is possible to do everything you want. Aaron's answer was not quite complete.

His approach is correct, up to creating the temporary table in the inner query. Then, you need to insert the results into a table in the outer query.

The following code snippet grabs the first line of a file and inserts it into the table @Lines:

declare @fieldsep char(1) = ',';
declare @recordsep char(1) = char(10);

declare @Lines table (
    line varchar(8000)
);

declare @sql varchar(8000) = ' 
    create table #tmp (
        line varchar(8000)
    );

    bulk insert #tmp
        from '''+@filename+'''
        with (FirstRow = 1, FieldTerminator = '''+@fieldsep+''', RowTerminator = '''+@recordsep+''');

    select * from #tmp';

insert into @Lines
    exec(@sql);

select * from @lines

Best guess:

var cur_value = $('#select-id').children('option:selected').text();

I like children better in this case because you know you're only going one branch down the DOM tree...

.....

$("#testID #testID2").removeClass("test2").addClass("test3");

Because you have assigned an id to img too, you can simply do this too:

$("#testID2").removeClass("test2").addClass("test3");

And finally, you can do this too:

$("#testID img").removeClass("test2").addClass("test3");

@Tim's answer only does half the work -- that gets it into a datetime.datetime object.

To get it into the string format you require, you use datetime.strftime:

print(datetime.strftime('%b %d,%Y'))

Also u can consider this

$('#select_2').find('option:selected').text();

which might be a little faster solution though I am not sure.

The ensurepip module was added in version 3.4 and then backported to 2.7.9.

So make sure your Python version is at least 2.7.9 if using Python 2, and at least 3.4 if using Python 3.

I think what you are being asked to do (or perhaps asking yourself?) is take a character value which matches the name of a column in a particular dataframe (possibly also given as a character). There are two tricks here. Most people learn to extract columns with the "$" operator and that won't work inside a function if the function is passed a character vecor. If the function is also supposed to accept character argument then you will need to use the get function as well:

 df1 <- data.frame(a=1:10, b=11:20)
 mean_col <- function( dfrm, col ) mean( get(dfrm)[[ col ]] )
 mean_col("df1", "b")
 # [1] 15.5

There is sort of a semantic boundary between ordinary objects like character vectors and language objects like the names of objects. The get function is one of the functions that lets you "promote" character values to language level evaluation. And the "$" function will NOT evaluate its argument in a function, so you need to use"[[". "$" only is useful at the console level and needs to be completely avoided in functions.

var seconds = 0;
setInterval(function () {
  seconds++;
}, 1000);

There you go, now you have a variable counting seconds elapsed. Since I don't know the context, you'll have to decide whether you want to attach that variable to an object or make it global.

Set interval is simply a function that takes a function as it's first parameter and a number of milliseconds to repeat the function as it's second parameter.

You could also solve this by saving and comparing times.

EDIT: This answer will provide very inconsistent results due to things such as the event loop and the way browsers may choose to pause or delay processing when a page is in a background tab. I strongly recommend using the accepted answer.

Two ways:

1. Edit the properties of the service and set the Log On user. The appropriate right will be automatically assigned.

2. Set it manually: Go to Administrative Tools -> Local Security Policy -> Local Policies -> User Rights Assignment. Edit the item "Log on as a service" and add your domain user there.

I had same issue but with express and apollo-server. The solution from here:

The only special consideration that needs to be made is to allow heroku to choose the port that the server is deployed to. Otherwise, there may be errors, such as a request timeout.

To configure apollo-server to use a port defined by Heroku at runtime, the listen function in your setup file can be called with a port defined by the PORT environment variable:

> server.listen({ port: process.env.PORT || 4000 }).then(({ url }) => { 
> console.log(`Server ready at ${url}`); });

For document references, not collections, you need:

// when you know the 'id'

this.afs.doc(`items/${id}`)
  .snapshotChanges().pipe(
    map((doc: any) => {
      const data = doc.payload.data();
      const id = doc.payload.id;
      return { id, ...data };
    });

as .valueChanges({ idField: 'id'}); will not work here. I assume it was not implemented since generally you search for a document by the id...

For multiple files; note the newer "multiple" attribute for input:

Form:

@using (Html.BeginForm("FileImport","Import",FormMethod.Post, new {enctype = "multipart/form-data"}))
{
    <label for="files">Filename:</label>
    <input type="file" name="files" multiple="true" id="files" />
    <input type="submit"  />
}

Controller:

[HttpPost]
public ActionResult FileImport(IEnumerable<HttpPostedFileBase> files)
{
    return View();
}

You can probably start a Service here if you want your Application to run in Background. This is what Service in Android are used for - running in background and doing longtime operations.

UDPATE

You can use START_STICKY to make your Service running continuously.

@Override
public int onStartCommand(Intent intent, int flags, int startId) {
    handleCommand(intent);
    // We want this service to continue running until it is explicitly
    // stopped, so return sticky.
    return START_STICKY;
}

"commentLine" is the name of function you are looking for. This function coment and uncoment with the same keybinding

I prefer an answer from Best way to print the result of a bool as 'false' or 'true' in c?, just like

printf("%s\n", "false\0true"+6*x);

• x == 0, "false\0true"+ 0" it means "false";
• x == 1, "false\0true"+ 6" it means "true";

This works for me:

#! /bin/bash

CACERTS=$(readlink -e $(dirname $(readlink -e $(which keytool)))/../lib/security/cacerts)

if keytool -list -keystore $CACERTS -storepass changeit > /dev/null ; then
    echo $CACERTS
else
    echo 'Can not find cacerts file.' >&2
    exit 1
fi

Only for Linux. My Solaris has no readlink. In the end I used this Perl-Script:

#! /usr/bin/env perl
use strict;
use warnings;
use Cwd qw(realpath);
$_ = realpath((grep {-x && -f} map {"$_/keytool"} split(':', $ENV{PATH}))[0]);
die "Can not find keytool" unless defined $_;
my $keytool = $_;
print "Using '$keytool'.\n";
s/keytool$//;
$_ = realpath($_ . '../lib/security/cacerts');
die "Can not find cacerts" unless -f $_;
my $cacerts = $_;
print "Importing into '$cacerts'.\n";
`$keytool -list -keystore "$cacerts" -storepass changeit`;
die "Can not read key container" unless $? == 0;
exit if $ARGV[0] eq '-d';
foreach (@ARGV) {
    my $cert = $_;
    s/\.[^.]+$//;
    my $alias = $_;
    print "Importing '$cert' as '$alias'.\n";
    `keytool -importcert -file "$cert" -alias "$alias" -keystore "$cacerts" -storepass changeit`;
    warn "Can not import certificate: $?" unless $? == 0;
}

/* this will change the HTML content with the new HTML that you want to update in your modal without too many resets... */

var = ""; //HTML to be changed 

$(".classbuttonClicked").click(function() {
    $('#ModalDivToChange').html(var);
    $('#myModal').modal('show');
});

This property controls the magnification level for the current element. The rendering effect for the element is that of a “zoom” function on a camera. Even though this property is not inherited, it still affects the rendering of child elements.

Example

 div { zoom: 200% }
 <div style=”zoom: 200%”>This is x2 text </div>

Alvaros JS free answer was a great start for me, and I really tried to get a truly JS-free answer that still delivered all the functionality expected of a Select with images, but sadly nesting forms was the down-fall. I'm posting two solutions here; my main solution that uses 1 line of JavaScript, and a totally JavaScript-free solution that won't work inside another form, but might be useful for nav menus.

Unfortunately there is a bit of repetition in the code, but when you think about what a Select does it makes sense. When you click on an option it copies that text to the selected area, i.e., clicking 1 of 4 options will not change the 4 options, but the top will now repeat the one you clicked. To do this with images would require JavaScript, orrrr... you duplicate the entries.

In my example we have a list of games (Products), which have versions. Each product may also have Expansions, which can also have versions. For each Product we give the user a list of each version if there's more than one, along with an image and version specific text.

<h4>@Model.Name</h4>
@if (Model.Versions.Count == 1)
{
    <div class="rich-select-option-body pl-2">
        <img src="@Model.Versions[0].ImageUrl" alt="">@Model.Versions[0].VersionName (@Model.Versions[0].Year)
    </div>
}
else
{
    <h5>Select the version</h5>
    <div class="rich-select custom-select">
        <div class="rich-select-dropdown">
            @foreach (var version in Model.Versions)
            {
                <div class="rich-select-option">
                    <input type="radio" name="game" id="[email protected]@version.VersionId" @if (version == Model.Versions.First()) { @Html.Raw(" checked") ; } />
                    <div class="rich-select-option-body">
                        <label tabindex="-1">
                            <img src="@version.ImageUrl" alt="">@version.VersionName (@version.Year)
                        </label>
                    </div>
                </div>
            }
        </div>
        <input type="checkbox" id="rich-select-dropdown-button" class="rich-select-dropdown-button" />
        <label for="rich-select-dropdown-button"></label>
        <div class="rich-select-options">
            @foreach (var version in Model.Versions)
            {
                <div class="rich-select-option">
                    <div class="rich-select-option-body">
                        <label for="[email protected]@version.VersionId" tabindex="-1" onclick="document.getElementById('rich-select-dropdown-button').click();">
                            <img src="@version.ImageUrl" alt=""> @version.VersionName (@version.Year)
                        </label>
                    </div>
                </div>
            }
        </div>
    </div>
}

Using JS for the checkbox deselection we can have multiple instances on a form. Here I've extended to show a list of Expansions, which also have the same logic around versions.

<h5 class="mt-3">Include Expansions?</h5>
@foreach (var expansion in Model.Expansions)
{
    <div class="form-row">
        <div class="custom-control custom-checkbox w-100">
            <input type="checkbox" class="expansion-checkbox custom-control-input" id="[email protected]">
            <label class="custom-control-label w-100" for="[email protected]">

                @if (expansion.Versions.Count == 1)
                {
                    <div class="rich-select-option-body pl-2">
                        <img src="@expansion.ImageUrl" />@expansion.Name: @expansion.Versions[0].VersionName (@expansion.Versions[0].Year)
                    </div>
                }
                else
                {
                    <div class="rich-select custom-select">
                        <div class="rich-select-dropdown">
                            @foreach (var version in expansion.Versions)
                            {
                                <div class="rich-select-option">
                                    <input type="radio" name="[email protected]" id="[email protected]@version.VersionId" @if (version == expansion.Versions.First()) { @Html.Raw(" checked") ; } />
                                    <div class="rich-select-option-body">
                                        <label tabindex="-1">
                                            <img src="@version.ImageUrl" alt="">@expansion.Name: @version.VersionName (@version.Year)
                                        </label>
                                    </div>
                                </div>
                            }
                        </div>

                        <input type="checkbox" id="[email protected]" class="rich-select-dropdown-button" />
                        <label for="[email protected]"></label>
                        <div class="rich-select-options">
                            @foreach (var version in expansion.Versions)
                            {
                                <div class="rich-select-option">
                                    <div class="rich-select-option-body">
                                        <label for="[email protected]@version.VersionId" tabindex="-1" onclick="document.getElementById('[email protected]').click();">
                                            <img src="@version.ImageUrl" alt="">@expansion.Name: @version.VersionName (@version.Year)
                                        </label>
                                    </div>
                                </div>
                            }
                        </div>
                    </div>
                }
            </label>
        </div>
    </div>

Of course this requires a fair bit of CSS, which I've only included in this JSFiddle to reduce the size of this already massive answer. I've used Bootstrap 4 to reduce the amount needed, and also to allow it to fit in with other Bootstrap controls and any site customisations that have been made.

The images are set to 75px, but this can easily be changed in 5 lines in .rich-select and .rich-select-option-body img

Here's a new answer to an old question, based on this Microsoft Research paper and references therein.

Note that from C11 and C++11 onwards, the semantics of div has become truncation towards zero (see [expr.mul]/4). Furthermore, for D divided by d, C++11 guarantees the following about the quotient qT and remainder rT

auto const qT = D / d;
auto const rT = D % d;
assert(D == d * qT + rT);
assert(abs(rT) < abs(d));
assert(signum(rT) == signum(D) || rT == 0);

where signum maps to -1, 0, +1, depending on whether its argument is <, ==, > than 0 (see this Q&A for source code).

With truncated division, the sign of the remainder is equal to the sign of the dividend D, i.e. -1 % 8 == -1. C++11 also provides a std::div function that returns a struct with members quot and rem according to truncated division.

There are other definitions possible, e.g. so-called floored division can be defined in terms of the builtin truncated division

auto const I = signum(rT) == -signum(d) ? 1 : 0;
auto const qF = qT - I;
auto const rF = rT + I * d;
assert(D == d * qF + rF);
assert(abs(rF) < abs(d));
assert(signum(rF) == signum(d));

With floored division, the sign of the remainder is equal to the sign of the divisor d. In languages such as Haskell and Oberon, there are builtin operators for floored division. In C++, you'd need to write a function using the above definitions.

Yet another way is Euclidean division, which can also be defined in terms of the builtin truncated division

auto const I = rT >= 0 ? 0 : (d > 0 ? 1 : -1);
auto const qE = qT - I;
auto const rE = rT + I * d;
assert(D == d * qE + rE);
assert(abs(rE) < abs(d));
assert(signum(rE) >= 0);

With Euclidean division, the sign of the remainder is always non-negative.

Arrow functions which is denoted by symbol (=>) helps you to create anonymous functions and methods. That leads to more shorter syntax. For example, below is a simple “Add” function which returns addition of two numbers.

function Add(num1 , num2 ){
return num1 + num2;
}

The above function becomes shorter by using “Arrow” syntax as shown below.

Above code has two parts as shown in the above diagram: -

Input: — This section specifies the input parameters to the anonymous function.

Logic: — This section comes after the symbol “=>”. This section has the logic of the actual function.

Many developers think that arrow function makes your syntax shorter, simpler and thus makes your code readable.

If you believe the above sentence, then let me assure you it’s a myth. If you think for a moment a properly written function with name is much readable than cryptic functions created in one line using an arrow symbol.

The main use of arrow function is to ensure that code runs in the callers context.

See the below code in which have a global variable "context" defined , this global variable is accessed inside a function "SomeOtherMethod" which is called from other method "SomeMethod".

This "SomeMethod" has local "context" variable. Now because "SomeOtherMethod" is called from ""SomeMethod" we expect it to display "local context" , but it displays "global context".

var context = “global context”;

function SomeOtherMethod(){
alert(this.context);
}

function SomeMethod(){
this.context = “local context”;
SomeOtherMethod();
}

var instance = new SomeMethod();

But if replace the call by using Arrow function it will display "local context".

var context = "global context";

    function SomeMethod(){
        this.context = "local context";
        SomeOtherMethod = () => {
            alert(this.context);
        }
        SomeOtherMethod();
    }
    var instance = new SomeMethod();

I would encourage you to read this link ( Arrow function in JavaScript ) which explain all the scenarios of javascript context and in which scenarios the callers context is not respected.

You can also see the demonstration of Arrow function with javascript in this youtube video which demonstrates practically the term Context.

I call $scope.$apply like this to ignored call multiple in one times.

      var callApplyTimeout = null;
      function callApply(callback) {
          if (!callback) callback = function () { };
          if (callApplyTimeout) $timeout.cancel(callApplyTimeout);

          callApplyTimeout = $timeout(function () {
              callback();
              $scope.$apply();
              var d = new Date();
              var m = d.getMilliseconds();
              console.log('$scope.$apply(); call ' + d.toString() + ' ' + m);
          }, 300);
      }

simply call

callApply();

You can also use

public static int getRandom(int[] array) {
    int rnd = (int)(Math.random()*array.length);
    return array[rnd];
}

Math.random() returns an double between 0.0 (inclusive) to 1.0 (exclusive)

Multiplying this with array.length gives you a double between 0.0 (inclusive) and array.length (exclusive)

Casting to int will round down giving you and integer between 0 (inclusive) and array.length-1 (inclusive)

This is my solution, although for sure you can use a lot of modules that give you the object as a promise or similar. Anyway, you were missing another callback

function getData(callbackData){
  var http = require('http');
  var str = '';

  var options = {
        host: 'www.random.org',
        path: '/integers/?num=1&min=1&max=10&col=1&base=10&format=plain&rnd=new'
  };

  callback = function(response) {

        response.on('data', function (chunk) {
              str += chunk;
        });

        response.on('end', function () {
              console.log(str);
          callbackData(str);
        });

        //return str;
  }

  var req = http.request(options, callback).end();

  // These just return undefined and empty
  console.log(req.data);
  console.log(str);
}

somewhere else

getData(function(data){
// YOUR CODE HERE!!!
})

Just add the following line to your code before print.

 pd.options.display.max_colwidth = 90  # set a value as your need

You can simply do the following steps for setting other additional options,

• You can change the options for pandas max_columns feature as follows to display more columns

  import pandas as pd
  pd.options.display.max_columns = 10
  

  (this allows 10 columns to display, you can change this as you need)

• Like that you can change the number of rows as you need to display as follows to display more rows

  pd.options.display.max_rows = 999
  

  (this allows to print 999 rows at a time)

this should works fine

Please kindly refer the doc to change more options/settings for pandas

var fs = require("fs");
var filename = "./index.html";

function start(resp) {
    resp.writeHead(200, {
        "Content-Type": "text/html"
    });
    fs.readFile(filename, "utf8", function(err, data) {
        if (err) throw err;
        resp.write(data);
        resp.end();
    });
}

If you mean that you can do this:

CREATE TABLE mytable_d (
ID          TINYINT NOT NULL AUTO_INCREMENT PRIMARY KEY,
Name        VARCHAR(255) NOT NULL,
UNIQUE(Name)
) ENGINE=InnoDB;


ALTER TABLE mytable
ADD COLUMN DID tinyint(5) NOT NULL,
ADD CONSTRAINT mytable_ibfk_4 
      FOREIGN KEY (DID) 
        REFERENCES mytable_d (ID) ON DELETE CASCADE;

 > OK.

But then:

ALTER TABLE mytable
DROP KEY AID ;

gives error.

You can drop the index and create a new one in one ALTER TABLE statement:

ALTER TABLE mytable
DROP KEY AID ,
ADD UNIQUE KEY AID (AID, BID, CID, DID);

append appends a single element. extend appends a list of elements.

Note that if you pass a list to append, it still adds one element:

>>> a = [1, 2, 3]
>>> a.append([4, 5, 6])
>>> a
[1, 2, 3, [4, 5, 6]]

In my case, all the compile statements has somehow arranged in a single line. separating them in individual lines has fixed the issue.

You want to take advantage of the inserted logical table that is available in the context of a trigger. It matches the schema for the table that is being inserted to and includes the row(s) that will be inserted (in an update trigger you have access to the inserted and deleted logical tables which represent the the new and original data respectively.)

So to insert Employee / Department pairs that do not currently exist you might try something like the following.

CREATE TRIGGER trig_Update_Employee
ON [EmployeeResult]
FOR INSERT
AS
Begin
    Insert into Employee (Name, Department) 
    Select Distinct i.Name, i.Department 
    from Inserted i
    Left Join Employee e
    on i.Name = e.Name and i.Department = e.Department
    where e.Name is null
End

The registry is the official way to detect if a specific version of the Framework is installed.

Which registry keys are needed change depending on the Framework version you are looking for:

Framework Version  Registry Key
------------------------------------------------------------------------------------------
1.0                HKLM\Software\Microsoft\.NETFramework\Policy\v1.0\3705 
1.1                HKLM\Software\Microsoft\NET Framework Setup\NDP\v1.1.4322\Install 
2.0                HKLM\Software\Microsoft\NET Framework Setup\NDP\v2.0.50727\Install 
3.0                HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.0\Setup\InstallSuccess 
3.5                HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5\Install 
4.0 Client Profile HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Client\Install
4.0 Full Profile   HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Full\Install

Generally you are looking for:

"Install"=dword:00000001

except for .NET 1.0, where the value is a string (REG_SZ) rather than a number (REG_DWORD).

Determining the service pack level follows a similar pattern:

Framework Version  Registry Key
------------------------------------------------------------------------------------------
1.0                HKLM\Software\Microsoft\Active Setup\Installed Components\{78705f0d-e8db-4b2d-8193-982bdda15ecd}\Version 
1.0[1]             HKLM\Software\Microsoft\Active Setup\Installed Components\{FDC11A6F-17D1-48f9-9EA3-9051954BAA24}\Version 
1.1                HKLM\Software\Microsoft\NET Framework Setup\NDP\v1.1.4322\SP 
2.0                HKLM\Software\Microsoft\NET Framework Setup\NDP\v2.0.50727\SP 
3.0                HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.0\SP 
3.5                HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5\SP 
4.0 Client Profile HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Client\Servicing
4.0 Full Profile   HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Full\Servicing

[1] Windows Media Center or Windows XP Tablet Edition

As you can see, determining the SP level for .NET 1.0 changes if you are running on Windows Media Center or Windows XP Tablet Edition. Again, .NET 1.0 uses a string value while all of the others use a DWORD.

For .NET 1.0 the string value at either of these keys has a format of #,#,####,#. The last # is the Service Pack level.

While I didn't explicitly ask for this, if you want to know the exact version number of the Framework you would use these registry keys:

Framework Version  Registry Key
------------------------------------------------------------------------------------------
1.0                HKLM\Software\Microsoft\Active Setup\Installed Components\{78705f0d-e8db-4b2d-8193-982bdda15ecd}\Version 
1.0[1]             HKLM\Software\Microsoft\Active Setup\Installed Components\{FDC11A6F-17D1-48f9-9EA3-9051954BAA24}\Version 
1.1                HKLM\Software\Microsoft\NET Framework Setup\NDP\v1.1.4322 
2.0[2]             HKLM\Software\Microsoft\NET Framework Setup\NDP\v2.0.50727\Version 
2.0[3]             HKLM\Software\Microsoft\NET Framework Setup\NDP\v2.0.50727\Increment
3.0                HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.0\Version 
3.5                HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5\Version 
4.0 Client Profile HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Version 
4.0 Full Profile   HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Version 

[1] Windows Media Center or Windows XP Tablet Edition
[2] .NET 2.0 SP1
[3] .NET 2.0 Original Release (RTM)

Again, .NET 1.0 uses a string value while all of the others use a DWORD.

Additional Notes

• for .NET 1.0 the string value at either of these keys has a format of #,#,####,#. The #,#,#### portion of the string is the Framework version.

• for .NET 1.1, we use the name of the registry key itself, which represents the version number.

• Finally, if you look at dependencies, .NET 3.0 adds additional functionality to .NET 2.0 so both .NET 2.0 and .NET 3.0 must both evaulate as being installed to correctly say that .NET 3.0 is installed. Likewise, .NET 3.5 adds additional functionality to .NET 2.0 and .NET 3.0, so .NET 2.0, .NET 3.0, and .NET 3. should all evaluate to being installed to correctly say that .NET 3.5 is installed.

• .NET 4.0 installs a new version of the CLR (CLR version 4.0) which can run side-by-side with CLR 2.0.

Update for .NET 4.5

There won't be a v4.5 key in the registry if .NET 4.5 is installed. Instead you have to check if the HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Full key contains a value called Release. If this value is present, .NET 4.5 is installed, otherwise it is not. More details can be found here and here.

You can "fake it" by creating a new HttpContext like this:

http://www.necronet.org/archive/2010/07/28/unit-testing-code-that-uses-httpcontext-current-session.aspx

I've taken that code and put it on an static helper class like so:

public static HttpContext FakeHttpContext()
{
    var httpRequest = new HttpRequest("", "http://example.com/", "");
    var stringWriter = new StringWriter();
    var httpResponse = new HttpResponse(stringWriter);
    var httpContext = new HttpContext(httpRequest, httpResponse);

    var sessionContainer = new HttpSessionStateContainer("id", new SessionStateItemCollection(),
                                            new HttpStaticObjectsCollection(), 10, true,
                                            HttpCookieMode.AutoDetect,
                                            SessionStateMode.InProc, false);

    httpContext.Items["AspSession"] = typeof(HttpSessionState).GetConstructor(
                                BindingFlags.NonPublic | BindingFlags.Instance,
                                null, CallingConventions.Standard,
                                new[] { typeof(HttpSessionStateContainer) },
                                null)
                        .Invoke(new object[] { sessionContainer });

    return httpContext;
}

Or instead of using reflection to construct the new HttpSessionState instance, you can just attach your HttpSessionStateContainer to the HttpContext (as per Brent M. Spell's comment):

SessionStateUtility.AddHttpSessionStateToContext(httpContext, sessionContainer);

and then you can call it in your unit tests like:

HttpContext.Current = MockHelper.FakeHttpContext();

While looking at the same problem, I found an example

<style type="text/css">
#topright {
    position: absolute;
    right: 0;
    top: 0;
    display: block;
    height: 125px;
    width: 125px;
    background: url(TRbanner.gif) no-repeat;
    text-indent: -999em;
    text-decoration: none;
}
</style>

<a id="topright" href="#" title="TopRight">Top Right Link Text</a>

The trick here is to create a small, (I used GIMP) a PNG (or GIF) that has a transparent background, (and then just delete the opposite bottom corner.)

@echo off
for /f "tokens=2 delims==" %%a in ('wmic OS Get localdatetime /value') do set "dt=%%a"
set "YY=%dt:~2,2%" & set "YYYY=%dt:~0,4%" & set "MM=%dt:~4,2%" & set "DD=%dt:~6,2%"
set "HH=%dt:~8,2%" & set "Min=%dt:~10,2%" & set "Sec=%dt:~12,2%"
set "datestamp=%YYYY%.%MM%.%DD%.%HH%.%Min%.%Sec%"
set drive=your backup folder
set databaseName=your databasename
set user="your database user"
set password="your database password"
subst Z: "C:\Program Files\7-Zip" 
subst M: "D:\AppServ\MySQL\bin"
set zipFile="%drive%\%databaseName%-%datestamp%.zip"
set sqlFile="%drive%\%databaseName%-%datestamp%.sql"
M:\mysqldump.exe --user=%user% --password=%password% --result-file="%sqlFile%" --databases %databaseName%
@echo Mysql Backup Created
Z:\7z.exe a -tzip "%zipFile%" "%sqlFile%"
@echo File Compress End
del %sqlFile%
@echo Delete mysql file
pause;

The best way is to create a variable of type Worksheet, assign the worksheet and use it every time the VBA would implicitly use the ActiveSheet.

This will help you avoid bugs that will eventually show up when your program grows in size.

For example something like Range("A1:C10").Sort Key1:=Range("A2") is good when the macro works only on one sheet. But you will eventually expand your macro to work with several sheets, find out that this doesn't work, adjust it to ShTest1.Range("A1:C10").Sort Key1:=Range("A2")... and find out that it still doesn't work.

Here is the correct way:

Dim ShTest1 As Worksheet
Set ShTest1 = Sheets("Test1")
ShTest1.Range("A1:C10").Sort Key1:=ShTest1.Range("A2")

Also you can use apache commons lib DateUtils.truncate():

Date now = new Date();
Date truncated = DateUtils.truncate(now, Calendar.DAY_OF_MONTH);

Time will be set to 00:00:00 so you can work with this date or print it formatted:

DateFormat dateFormat = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss");

System.out.println(dateFormat.format(now);        // 2010-05-11 11:32:47
System.out.println(dateFormat.format(truncated);  // 2010-05-11 00:00:00

I wrote the following simple class as, effectively, a way to emulate a pointer in python:

class Parameter:
    """Syntactic sugar for getter/setter pair
    Usage:

    p = Parameter(getter, setter)

    Set parameter value:
    p(value)
    p.val = value
    p.set(value)

    Retrieve parameter value:
    p()
    p.val
    p.get()
    """
    def __init__(self, getter, setter):
        """Create parameter

        Required positional parameters:
        getter: called with no arguments, retrieves the parameter value.
        setter: called with value, sets the parameter.
        """
        self._get = getter
        self._set = setter

    def __call__(self, val=None):
        if val is not None:
            self._set(val)
        return self._get()

    def get(self):
        return self._get()

    def set(self, val):
        self._set(val)

    @property
    def val(self):
        return self._get()

    @val.setter
    def val(self, val):
        self._set(val)

Here's an example of use (from a jupyter notebook page):

l1 = list(range(10))
def l1_5_getter(lst=l1, number=5):
    return lst[number]

def l1_5_setter(val, lst=l1, number=5):
    lst[number] = val

[
    l1_5_getter(),
    l1_5_setter(12),
    l1,
    l1_5_getter()
]

Out = [5, None, [0, 1, 2, 3, 4, 12, 6, 7, 8, 9], 12]

p = Parameter(l1_5_getter, l1_5_setter)

print([
    p(),
    p.get(),
    p.val,
    p(13),
    p(),
    p.set(14),
    p.get()
])
p.val = 15
print(p.val, l1)

[12, 12, 12, 13, 13, None, 14]
15 [0, 1, 2, 3, 4, 15, 6, 7, 8, 9]

Of course, it is also easy to make this work for dict items or attributes of an object. There is even a way to do what the OP asked for, using globals():

def setter(val, dict=globals(), key='a'):
    dict[key] = val

def getter(dict=globals(), key='a'):
    return dict[key]

pa = Parameter(getter, setter)
pa(2)
print(a)
pa(3)
print(a)

This will print out 2, followed by 3.

Messing with the global namespace in this way is kind of transparently a terrible idea, but it shows that it is possible (if inadvisable) to do what the OP asked for.

The example is, of course, fairly pointless. But I have found this class to be useful in the application for which I developed it: a mathematical model whose behavior is governed by numerous user-settable mathematical parameters, of diverse types (which, because they depend on command line arguments, are not known at compile time). And once access to something has been encapsulated in a Parameter object, all such objects can be manipulated in a uniform way.

Although it doesn't look much like a C or C++ pointer, this is solving a problem that I would have solved with pointers if I were writing in C++.

Code:

private static void RegisterServices(IKernel kernel)
{
    Mock<IProductRepository> mock=new Mock<IProductRepository>();
    mock.Setup(x => x.Products).Returns(new List<Product>
    {
        new Product {Name = "Football", Price = 23},
        new Product {Name = "Surf board", Price = 179},
        new Product {Name = "Running shose", Price = 95}
    });

    kernel.Bind<IProductRepository>().ToConstant(mock.Object);
}        

but see exception.

I just updated to Chrome 49 and Diogo Cid's solution doesn't work anymore.

I made a different workaround hiding and removing the fields at run-time after the page is loaded.

Chrome now ignores the original workaround applying the credentials to the first displayed type="password" field and its previous type="text" field, so I have hidden both fields using CSS visibility: hidden;

<!-- HTML -->
<form>
    <!-- Fake fields -->
    <input class="chromeHack-autocomplete">
    <input type="password" class="chromeHack-autocomplete">

    <input type="text" placeholder="e-mail" autocomplete="off" />
    <input type="password" placeholder="Password" autocomplete="off" />
</form>

<!-- CSS -->
.chromeHack-autocomplete {
    height: 0px !important;
    width: 0px !important;
    opacity: 0 !important;
    padding: 0 !important; margin: 0 !important;
}

<!--JavaScript (jQuery) -->
jQuery(window).load(function() {
    $(".chromeHack-autocomplete").delay(100).hide(0, function() {
        $(this).remove();
    });
});

I know that it may seem not very elegant but it works.

Another option is

>>> print os.path.relpath('/usr/var/log/', '/usr/var')
log

The simplest way to get equal height columns, without the ugly side effects that come along with absolute positioning, is to use the display: table properties:

.div1 {
  width:300px;
  height: auto;
  background-color: grey;  
  border:1px solid;
  display: table;
}

.div2, .div3 {
  display: table-cell;
}
.div2 {
  width:150px;
  height:auto;
  background-color: #F4A460;  

}
.div3 {
  width:150px;
  height:auto;
  background-color: #FFFFE0;  
}

http://jsfiddle.net/E4Zgj/21/

Now, if your goal is to have .div2 so that it is only as tall as it needs to be to contain its content while .div3 is at least as tall as .div2 but still able to expand if its content makes it taller than .div2, then you need to use flexbox. Flexbox support isn't quite there yet (IE10, Opera, Chrome. Firefox follows an old spec, but is following the current spec soon).

.div1 {
  width:300px;
  height: auto;
  background-color: grey;  
  border:1px solid;
  display: flex;
  align-items: flex-start;
}

.div2 {
  width:150px;
  background-color: #F4A460;
}

.div3 {
  width:150px;
  background-color: #FFFFE0;
  align-self: stretch;
}

http://jsfiddle.net/E4Zgj/22/

Before understanding JSONP, you need to know JSON format and XML. Currently the most frequently used data format on the web is XML, but XML is very complicated. It makes users inconvenient to process embedded in Web pages.

To make JavaScript can easily exchange data, even as the data processing program, we use the wording according to JavaScript objects and developed a simple data exchange format, which is JSON. JSON can be used as data, or as a JavaScript program.

JSON can be directly embedded in JavaScript, using them you can directly execute certain JSON program, but due to security constraints, the browser Sandbox mechanism disables cross-domain JSON code execution.

To make JSON can be passed after the execution, we developed a JSONP. JSONP bypass the security limits of the browser with JavaScript Callback functionality and the < script > tag.

So in short it explains what JSONP is, what problem it solves (when to use it).

Javascript was the original name, meant to capitalize on the popularity of java. ECMA is the standards body that oversees the standard that was eventually put in place so the names are roughly equivalent.

Implementations have other names, like V8 or Rhino, etc.

If you're using this for currency, and also want the value to be seperated by ,'s you can use

$ {:,.f2}.format(currency_value).

e.g.:

currency_value = 1234.50

$ {:,.f2}.format(currency_value) --> $ 1,234.50

Here is a bit of code I wrote some time ago:

print("> At the end of year " + year_string + " total paid is \t$ {:,.2f}".format(total_paid))

> At the end of year   1  total paid is         $ 43,806.36
> At the end of year   2  total paid is         $ 87,612.72
> At the end of year   3  total paid is         $ 131,419.08
> At the end of year   4  total paid is         $ 175,225.44
> At the end of year   5  total paid is         $ 219,031.80   <-- Note .80 and not .8
> At the end of year   6  total paid is         $ 262,838.16
> At the end of year   7  total paid is         $ 306,644.52
> At the end of year   8  total paid is         $ 350,450.88
> At the end of year   9  total paid is         $ 394,257.24
> At the end of year  10  total paid is         $ 438,063.60   <-- Note .60 and not .6
> At the end of year  11  total paid is         $ 481,869.96
> At the end of year  12  total paid is         $ 525,676.32
> At the end of year  13  total paid is         $ 569,482.68
> At the end of year  14  total paid is         $ 613,289.04
> At the end of year  15  total paid is         $ 657,095.40   <-- Note .40 and not .4  
> At the end of year  16  total paid is         $ 700,901.76
> At the end of year  17  total paid is         $ 744,708.12
> At the end of year  18  total paid is         $ 788,514.48
> At the end of year  19  total paid is         $ 832,320.84
> At the end of year  20  total paid is         $ 876,127.20   <-- Note .20 and not .2

With HTML5 specification... It is now possible to put a block-level element inside of an inline element. So now it's perfectly appropriate to put a 'div' or 'h1' inside of an 'a' element.

The complete example with an array. Replace "constructArrayType()" by "constructCollectionType()" or any other type you need.

import java.io.IOException;

import com.fasterxml.jackson.core.JsonParseException;
import com.fasterxml.jackson.databind.ObjectMapper;
import com.fasterxml.jackson.databind.type.TypeFactory;

public class Sorting {

    private String property;

    private String direction;

    public Sorting() {

    }

    public Sorting(String property, String direction) {
        this.property = property;
        this.direction = direction;
    }

    public String getProperty() {
        return property;
    }

    public void setProperty(String property) {
        this.property = property;
    }

    public String getDirection() {
        return direction;
    }

    public void setDirection(String direction) {
        this.direction = direction;
    }

    public static void main(String[] args) throws JsonParseException, IOException {
        final String json = "[{\"property\":\"title1\", \"direction\":\"ASC\"}, {\"property\":\"title2\", \"direction\":\"DESC\"}]";
        ObjectMapper mapper = new ObjectMapper();
        Sorting[] sortings = mapper.readValue(json, TypeFactory.defaultInstance().constructArrayType(Sorting.class));
        System.out.println(sortings);
    }
}

You want to set your db to single user mode, do the restore, then set it back to multiuser:

ALTER DATABASE YourDB
SET SINGLE_USER WITH
ROLLBACK AFTER 60 --this will give your current connections 60 seconds to complete

--Do Actual Restore
RESTORE DATABASE YourDB
FROM DISK = 'D:\BackUp\YourBaackUpFile.bak'
WITH MOVE 'YourMDFLogicalName' TO 'D:\Data\YourMDFFile.mdf',
MOVE 'YourLDFLogicalName' TO 'D:\Data\YourLDFFile.ldf'

/*If there is no error in statement before database will be in multiuser
mode.  If error occurs please execute following command it will convert
database in multi user.*/
ALTER DATABASE YourDB SET MULTI_USER
GO

Reference : Pinal Dave (http://blog.SQLAuthority.com)

Official reference: https://msdn.microsoft.com/en-us/library/ms345598.aspx

This error was raised for me because of an unhandled exception thrown in the Public Sub New() (Visual Basic) constructor function of the Web Page in the code behind.

If you implement the constructor function wrap the code in a Try/Catch statement and see if it solves the problem.

-XX:PermSize -XX:MaxPermSize are used to set size for Permanent Generation.

Permanent Generation: The Permanent Generation is where class files are kept. These are the result of compiled classes and JSP pages. If this space is full, it triggers a Full Garbage Collection. If the Full Garbage Collection cannot clean out old unreferenced classes and there is no room left to expand the Permanent Space, an Out-of- Memory error (OOME) is thrown and the JVM will crash.

I have had the same error. When i check the code then i found that declare "GET" request in my angular (font-end) side and declare "POST" request in the ASP.net (back-end) side. Set POST/GET any one in both side. Then solved the error.

In addition to the answers above. You can do it programmatically by implementing the TrustManager:

TrustManager[] trustAllCerts = new TrustManager[] {
        new X509TrustManager() {
          public java.security.cert.X509Certificate[] getAcceptedIssuers() {
           return null;
          }
          @Override
          public void checkClientTrusted(X509Certificate[] arg0, String arg1)
           throws CertificateException {}

          @Override
          public void checkServerTrusted(X509Certificate[] arg0, String arg1)
            throws CertificateException {}
          }
     };

  SSLContext sc=null;
  try {
   sc = SSLContext.getInstance("SSL");
  } catch (NoSuchAlgorithmException e) {
   e.printStackTrace();
  }
  try {
   sc.init(null, trustAllCerts, new java.security.SecureRandom());
  } catch (KeyManagementException e) {
   e.printStackTrace();
  }
  HttpsURLConnection.setDefaultSSLSocketFactory(sc.getSocketFactory());
  // Create all-trusting host name verifier
  HostnameVerifier validHosts = new HostnameVerifier() {
  @Override
  public boolean verify(String arg0, SSLSession arg1) {
   return true;
  }
  };
  // All hosts will be valid
  HttpsURLConnection.setDefaultHostnameVerifier(validHosts);

However this is not a good practice for production.

This example on How to disable SSL certificat validation in Java contains a utility class you can copy in your project.

Is it a good practice to use try-except-else in python?

The answer to this is that it is context dependent. If you do this:

d = dict()
try:
    item = d['item']
except KeyError:
    item = 'default'

It demonstrates that you don't know Python very well. This functionality is encapsulated in the dict.get method:

item = d.get('item', 'default')

The try/except block is a much more visually cluttered and verbose way of writing what can be efficiently executing in a single line with an atomic method. There are other cases where this is true.

However, that does not mean that we should avoid all exception handling. In some cases it is preferred to avoid race conditions. Don't check if a file exists, just attempt to open it, and catch the appropriate IOError. For the sake of simplicity and readability, try to encapsulate this or factor it out as apropos.

Read the Zen of Python, understanding that there are principles that are in tension, and be wary of dogma that relies too heavily on any one of the statements in it.

You can sets the body's background colour using document.body.style.backgroundColor = "red"; so this can be put into a function that's called when the user clicks. The next part can be done by using document.getElementByID("divID").style.backgroundColor = "red"; window.setTimeout("yourFunction()",10000); which calls yourFunction in 10 seconds to change the colour back.

=iferror(1/ (1/ H15+G16-F16 ), "")

this way avoids repeating the central calculation (which can often be much longer or more processor hungry than the one you have here...

enjoy

All have to use bellow code:

$nday = time() + ( 24 * 60 * 60);    
echo 'Now:       '. date('Y-m-d') ."\n";    
echo 'Next Day: '. date('Y-m-d', $nday) ."\n";

Imagine what happens if x[l] is neither 0 nor 1 in the loop. In that case a and b will never be assigned to and have an undefined value. You must initialize them both with some value, for example 0.

I mostly agree with the accepted answer, but there is a C++11 option that has not been covered in existing answers:

• Return factory method results by value, and
• Provide a cheap move constructor.

Example:

struct sandwich {
  // Factory methods.
  static sandwich ham();
  static sandwich spam();
  // Move constructor.
  sandwich(sandwich &&);
  // etc.
};

Then you can construct objects on the stack:

sandwich mine{sandwich::ham()};

As subobjects of other things:

auto lunch = std::make_pair(sandwich::spam(), apple{});

Or dynamically allocated:

auto ptr = std::make_shared<sandwich>(sandwich::ham());

When might I use this?

If, on a public constructor, it is not possible to give meaningful initialisers for all class members without some preliminary calculation, then I might convert that constructor to a static method. The static method performs the preliminary calculations, then returns a value result via a private constructor which just does a member-wise initialisation.

I say 'might' because it depends on which approach gives the clearest code without being unnecessarily inefficient.

Since this must have an input element as a parent, you could just use

<input type="text" ng-model="foo" ng-change="myOnChangeFunction()">

Alternatively, you could use the ngModelController and add a function to $formatters, which executes functions on input change. See http://docs.angularjs.org/api/ng.directive:ngModel.NgModelController

.directive("myDirective", function() {
  return {
    restrict: 'A',
    require: 'ngModel',
    link: function(scope, element, attr, ngModel) {
      ngModel.$formatters.push(function(value) {
        // Do stuff here, and return the formatted value.
      });
  };
};

The following example was adapted from Mozilla Hacks' blog post and is using MutationObserver.

// Select the node that will be observed for mutations
var targetNode = document.getElementById('some-id');

// Options for the observer (which mutations to observe)
var config = { attributes: true, childList: true };

// Callback function to execute when mutations are observed
var callback = function(mutationsList) {
    for(var mutation of mutationsList) {
        if (mutation.type == 'childList') {
            console.log('A child node has been added or removed.');
        }
        else if (mutation.type == 'attributes') {
            console.log('The ' + mutation.attributeName + ' attribute was modified.');
        }
    }
};

// Create an observer instance linked to the callback function
var observer = new MutationObserver(callback);

// Start observing the target node for configured mutations
observer.observe(targetNode, config);

// Later, you can stop observing
observer.disconnect();

Browser support: Chrome 18+, Firefox 14+, IE 11+, Safari 6+

In Python 3.5, os.scandir is better if you need to check for file attributes or type - see os.DirEntry for properties of the object that's returned by the function.

import os 

for file in os.scandir(path):
    if file.name.endswith(".bak"):
        os.unlink(file.path)

This also doesn't require changing directories since each DirEntry already includes the full path to the file.

• Use ng serve --host<Your IP> --port<Required if any>.

• ng serve --host=192.111.1.11 --port=4545.

• You can now see the below line at the end of compilation.

Angular Live Development Server is listening on 192.111.1.11:4545, open your browser on http://192.111.1.11:4545/ **.

on Debian 10 I start mysql from ./opt/lampp/xampp start

I do strace ./opt/lampp/sbin/mysqld and see that my.cnf is there:

stat("/opt/lampp/etc/my.cnf", {st_mode=S_IFREG|0644, st_size=5050, ...}) = 0
openat(AT_FDCWD, "/opt/lampp/etc/my.cnf", O_RDONLY|O_CLOEXEC) = 3

hence, I add sql_mode config to /opt/lampp/etc/my.cnf instead of /etc/mysql/my.cnf

1. Check what security group you are using for your instance. See value of Security Groups column in row of your instance. It's important - I changed rules for default group, but my instance was under quickstart-1 group when I had similar issue.
2. Go to Security Groups tab, go to Inbound tab, select HTTP in Create a new rule combo-box, leave 0.0.0.0/0 in source field and click Add Rule, then Apply rule changes.

You could do something like this

public abstract MyAbstractClass {

    @Autowire
    private MyMock myMock;        

    protected String sayHello() {
            return myMock.getHello() + ", " + getName();
    }

    public abstract String getName();
}

// this is your JUnit test
public class MyAbstractClassTest extends MyAbstractClass {

    @Mock
    private MyMock myMock;

    @InjectMocks
    private MyAbstractClass thiz = this;

    private String myName = null;

    @Override
    public String getName() {
        return myName;
    }

    @Test
    public void testSayHello() {
        myName = "Johnny"
        when(myMock.getHello()).thenReturn("Hello");
        String result = sayHello();
        assertEquals("Hello, Johnny", result);
    }
}

int val = '1' & 15;

The binary of the ASCII charecters 0-9 is:

0   -   00110000

1   -   00110001

2   -   00110010

3   -   00110011

4   -   00110100

5   -   00110101

6   -   00110110

7   -   00110111

8   -   00111000

9   -   00111001

and if you take in each one of them the first 4 LSB(using bitwise AND with 8'b00001111 that equels to 15) you get the actual number (0000 = 0,0001=1,0010=2,... )

Use executeUpdate() to issue data manipulation statements. executeQuery() is only meant for SELECT queries (i.e. queries that return a result set).

For the image that is not showing up. Open the image in the Image editor and check the type you are probably name it as "gif" but its saved in a different format that's one reason that the browser is unable to render it and it is not showing.
For the image stretching issue please specify the actual width and height dimensions in #banner instead of width: 100%; height: 200px that you have specified.

#!/usr/bin/env python
import inspect

called=lambda: inspect.stack()[1][3]

def caller1():
    print "inside: ",called()

def caller2():
    print "inside: ",called()

if __name__=='__main__':
    caller1()
    caller2()
shahid@shahid-VirtualBox:~/Documents$ python test_func.py 
inside:  caller1
inside:  caller2
shahid@shahid-VirtualBox:~/Documents$

webpack entry.jsx ./output.js -p

works for me, with -p flag.

Many answers for this questions are great and some have even looked into the corner cases. I would like to add a simple answer that can be of daily use... where you mostly get into those corner cases (like having escaped commas or commas in quotes etc.,).

FS (Field Separator) is the variable whose value is dafaulted to space. So awk by default splits at space for any line.

So using BEGIN (Execute before taking input) we can set this field to anything we want...

awk 'BEGIN {FS = ","}; {print $3}'

The above code will print the 3rd column in a csv file.

There's no pretty way. You might be able to use a proxy with the handler having the target methods and delegating everything else to them. Of course you'll have to use a factory because there'll be no constructor.

This happened to me because I hadn't added the conf.configure(); before beginning the session:

Configuration conf = new Configuration();
conf.configure();

Cross Browser Solution

Some older browsers implemented keydown events in a non-standard way.

KeyBoardEvent.key is the way it is supposed to be implemented in modern browsers.

which and keyCode are deprecated nowadays, but it doesn't hurt to check for these events nonetheless so that the code works for users that still use older browsers like IE.

The isKeyPressed function checks if the pressed key was enter and event.preventDefault() hinders the form from submitting.

  if (isKeyPressed(event, 'Enter', 13)) {
    event.preventDefault();
    console.log('enter was pressed and is prevented');
  }

Minimal working example

JS

function isKeyPressed(event, expectedKey, expectedCode) {
  const code = event.which || event.keyCode;

  if (expectedKey === event.key || code === expectedCode) {
    return true;
  }
  return false;
}

document.getElementById('myInput').addEventListener('keydown', function(event) {
  if (isKeyPressed(event, 'Enter', 13)) {
    event.preventDefault();
    console.log('enter was pressed and is prevented');
  }
});

HTML

<form>
  <input id="myInput">
</form>

https://jsfiddle.net/tobiobeck/z13dh5r2/

This is simply possible using the built-in enumerate() and max() function and the optional key argument of the max() function and a simple lambda expression:

theList = [1, 5, 10]
maxIndex, maxValue = max(enumerate(theList), key=lambda v: v[1])
# => (2, 10)

In the docs for max() it says that the key argument expects a function like in the list.sort() function. Also see the Sorting How To.

It works the same for min(). Btw it returns the first max/min value.

1. I save the diff of the current directory (including uncommitted files) against the current HEAD.
2. Then you can transport the save.patch file to wherever (including binary files).
3. On your target machine, apply the patch using git apply <file>

Note: it diff's the currently staged files too.

$ git diff --binary --staged HEAD > save.patch
$ git reset --hard
$ <transport it>
$ git apply save.patch

You can do this by using the following xml

<RelativeLayout
    style="@style/GenericProgressBackground"
    android:id="@+id/loadingPanel"
    >
    <ProgressBar
        style="@style/GenericProgressIndicator"/>
</RelativeLayout>

With this style

<style name="GenericProgressBackground" parent="android:Theme">
    <item name="android:layout_width">fill_parent</item>    
    <item name="android:layout_height">fill_parent</item>
    <item name="android:background">#DD111111</item>    
    <item name="android:gravity">center</item>  
</style>
<style name="GenericProgressIndicator" parent="@android:style/Widget.ProgressBar.Small">
    <item name="android:layout_width">wrap_content</item>
    <item name="android:layout_height">wrap_content</item>
    <item name="android:indeterminate">true</item> 
</style>

To use this, you must hide your UI elements by setting the visibility value to GONE and whenever the data is loaded, call setVisibility(View.VISIBLE) on all your views to restore them. Don't forget to call findViewById(R.id.loadingPanel).setVisiblity(View.GONE) to hide the loading animation.

If you dont have a loading event/function but just want the loading panel to disappear after x seconds use a Handle to trigger the hiding/showing.

INSERT INTO mt_magazine_subscription SELECT *
       FROM tbl_magazine_subscription 
       ORDER BY magazine_subscription_id ASC

Take care not to include

#include <string.h> 

but only

#include <string>

It took me 1 hour to find this in my code.

Hope this can help

If you are using babel, you should check out babel-plugin-lodash, it will cherry-pick the parts of lodash you are using for you, less hassle and a smaller bundle.

It has a few limitations:

• You must use ES2015 imports to load Lodash
• Babel < 6 & Node.js < 4 aren’t supported
• Chain sequences aren’t supported. See this blog post for alternatives.
• Modularized method packages aren’t supported

To align horizontally it's pretty straight forward:

    <style type="text/css"> 
body  {
    margin: 0; 
    padding: 0;
    text-align: center;
}
.bodyclass #container { 
    width: ???px; /*SET your width here*/
    margin: 0 auto;
    text-align: left;
} 
</style>
<body class="bodyclass ">
<div id="container">type your content here</div>
</body>

and for vertical align, it's a bit tricky: here's the source

    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN">
<html>
<head>
  <title>Universal vertical center with CSS</title>
  <style>
    .greenBorder {border: 1px solid green;} /* just borders to see it */
  </style>
</head>

<body>
  <div class="greenBorder" style="display: table; height: 400px; #position: relative; overflow: hidden;">
    <div style=" #position: absolute; #top: 50%;display: table-cell; vertical-align: middle;">
      <div class="greenBorder" style=" #position: relative; #top: -50%">
        any text<br>
        any height<br>
        any content, for example generated from DB<br>
        everything is vertically centered
      </div>
    </div>
  </div>
</body>
</html>

How about Azure ServiceBus? It supports nodejs.

Here is probably the simplest way to go about it (with a reproducible example):

library(plyr)
df <- data.frame(ID=rep(1:3, 3), Obs_1=rnorm(9), Obs_2=rnorm(9), Obs_3=rnorm(9))
ddply(df, .(ID), summarize, Obs_1_mean=mean(Obs_1), Obs_1_std_dev=sd(Obs_1),
  Obs_2_mean=mean(Obs_2), Obs_2_std_dev=sd(Obs_2))

   ID  Obs_1_mean Obs_1_std_dev  Obs_2_mean Obs_2_std_dev
1  1 -0.13994642     0.8258445 -0.15186380     0.4251405
2  2  1.49982393     0.2282299  0.50816036     0.5812907
3  3 -0.09269806     0.6115075 -0.01943867     1.3348792

EDIT: The following approach saves you a lot of typing when dealing with many columns.

ddply(df, .(ID), colwise(mean))

  ID      Obs_1      Obs_2      Obs_3
1  1 -0.3748831  0.1787371  1.0749142
2  2 -1.0363973  0.0157575 -0.8826969
3  3  1.0721708 -1.1339571 -0.5983944

ddply(df, .(ID), colwise(sd))

  ID     Obs_1     Obs_2     Obs_3
1  1 0.8732498 0.4853133 0.5945867
2  2 0.2978193 1.0451626 0.5235572
3  3 0.4796820 0.7563216 1.4404602

Using one while loop:

In [1]: start = 1
   ...: 
   ...: while True:
   ...:     if start != 1:        
   ...:         do_run = raw_input('Restart?  y/n:')
   ...:         if do_run == 'y':
   ...:             pass
   ...:         elif do_run == 'n':
   ...:             break
   ...:         else: 
   ...:             print 'Invalid input'
   ...:             continue
   ...: 
   ...:     print 'Doing stuff!!!'
   ...: 
   ...:     if start == 1:
   ...:         start = 0
   ...:         
Doing stuff!!!

Restart?  y/n:y
Doing stuff!!!

Restart?  y/n:f
Invalid input

Restart?  y/n:n

In [2]:

Check out the Arrays.fill methods.

int[] array = new int[4];
Arrays.fill(array, 0);

Because in the first one , you're trying to convert a collection to an ArrayList. In the 2nd one , you just use the built in constructor of ArrayList

template <typename C>
struct reverse_wrapper {

    C & c_;
    reverse_wrapper(C & c) :  c_(c) {}

    typename C::reverse_iterator begin() {return c_.rbegin();}
    typename C::reverse_iterator end() {return c_.rend(); }
};

template <typename C, size_t N>
struct reverse_wrapper< C[N] >{

    C (&c_)[N];
    reverse_wrapper( C(&c)[N] ) : c_(c) {}

    typename std::reverse_iterator<const C *> begin() { return std::rbegin(c_); }
    typename std::reverse_iterator<const C *> end() { return std::rend(c_); }
};


template <typename C>
reverse_wrapper<C> r_wrap(C & c) {
    return reverse_wrapper<C>(c);
}

eg:

int main(int argc, const char * argv[]) {
    std::vector<int> arr{1, 2, 3, 4, 5};
    int arr1[] = {1, 2, 3, 4, 5};

    for (auto i : r_wrap(arr)) {
        printf("%d ", i);
    }
    printf("\n");

    for (auto i : r_wrap(arr1)) {
        printf("%d ", i);
    }
    printf("\n");
    return 0;
}

BlobBuilder is obsolete, use Blob constructor instead:

URL.createObjectURL(new Blob([/*whatever content*/] , {type:'text/plain'}));

This returns a blob URL which you can then use in an anchor's href. You can also modify an anchor's download attribute to manipulate the file name:

<a href="/*assign url here*/" id="link" download="whatever.txt">download me</a>

Fiddled. If I recall correctly, there are arbitrary restrictions on trusted non-user initiated downloads; thus we'll stick with a link clicking which is seen as sufficiently user-initiated :)

Update: it's actually pretty trivial to save current document's html! Whenever our interactive link is clicked, we'll update its href with a relevant blob. After executing the click-bound event, that's the download URL that will be navigated to!

$('#link').on('click', function(e){
  this.href = URL.createObjectURL(
    new Blob([document.documentElement.outerHTML] , {type:'text/html'})
  );
});

Fiddled again.

Also struggled with this issue, trying to upload .csv data into AWS RDS instance from my local machine using MySQL Workbench on Windows.

The addition I needed was adding OPT_LOCAL_INFILE=1 in: Connection > Advanced > Others. Note CAPS was required.

I found this answer by PeterMag in AWS Developer Forums.

For further info:

SHOW VARIABLES LIKE 'local_infile'; already returned ON and the query was:

LOAD DATA LOCAL INFILE 'filepath/file.csv' 
    INTO TABLE `table_name`
    FIELDS TERMINATED BY ',' 
    ENCLOSED BY '"'
    LINES TERMINATED BY '\n'
    IGNORE 1 ROWS;

Copying from the answer source referenced above:

Apparently this is a bug in MYSQL Workbench V8.X. In addition to the configurations shown earlier in this thread, you also need to change the MYSQL Connection in Workbench as follows:

1. Go to the Welcome page of MYSQL which displays all your connections
2. Select Manage Server Connections (the little spanner icon)
3. Select your connection
4. Select Advanced tab
5. In the Others box, add OPT_LOCAL_INFILE=1

Now I can use the LOAD DATA LOCAL INFILE query on MYSQL RDS. It seems that the File_priv permission is not required.*

Here is a solution that also takes in account if you are using Ajax requests.

using System;
using System.Web.Mvc;
using System.Web.Routing;

namespace YourNamespace{        
    [AttributeUsage(AttributeTargets.Class | AttributeTargets.Method, Inherited = true, AllowMultiple = true)]
    public class AuthorizeCustom : ActionFilterAttribute {
        public override void OnActionExecuting(ActionExecutingContext context) {
            if (YourAuthorizationCheckGoesHere) {               
                string area = "";// leave empty if not using area's
                string controller = "ControllerName";
                string action = "ActionName";
                var urlHelper = new UrlHelper(context.RequestContext);                  
                if (context.HttpContext.Request.IsAjaxRequest()){ // Check if Ajax
                    if(area == string.Empty)
                        context.HttpContext.Response.Write($"<script>window.location.reload('{urlHelper.Content(System.IO.Path.Combine(controller, action))}');</script>");
                    else
                        context.HttpContext.Response.Write($"<script>window.location.reload('{urlHelper.Content(System.IO.Path.Combine(area, controller, action))}');</script>");
                } else   // Non Ajax Request                      
                    context.Result = new RedirectToRouteResult(new RouteValueDictionary( new{ area, controller, action }));             
            }
            base.OnActionExecuting(context);
        }
    }
}

Another simple way is to use

cat .git/config in a git repo

This will list details for local branches

You need to use convert in order by as well:

SELECT  Convert(varchar,A.InsertDate,103) as Tran_Date
order by Convert(varchar,A.InsertDate,103)

size_t is an unsigned integral type, that can represent the largest integer on you system. Only use it if you need very large arrays,matrices etc.

Some functions return an size_t and your compiler will warn you if you try to do comparisons.

Avoid that by using a the appropriate signed/unsigned datatype or simply typecast for a fast hack.

All You need to do is remove spaces or tab spaces from the start of following codes

from django.contrib import admin

# Register your models here.
from .models import Myapp
admin.site.register(Myapp)

Try to work with EditText by make it unclickable and unfocusable, also you can display a scrollbar and delete the EditText's underbar.
Here is an example:

<EditText
android:id="@+id/my_edit_text"
android:layout_width="match_parent"
android:layout_height="wrap_parent"
android:inputType="textMultiLine"                   <!-- multiline -->
android:clickable="false"                         <!-- unclickable -->
android:focusable="false"                         <!-- unfocusable -->
android:scrollbars="vertical"     <!-- enable scrolling vertically -->
android:background="@android:color/transparent"   <!-- hide the underbar of EditText -->
/>  

Hope this helps :)

try this code

Intent photo= new Intent("android.media.action.IMAGE_CAPTURE");
                    startActivityForResult(photo, CAMERA_PIC_REQUEST);

I have tried above with above code but not working ,Here is solution to set current date selected in asp.net calendar control

dtpStartDate.SelectedDate = Convert.ToDateTime(DateTime.Now.Date);
dtpStartDate.VisibleDate = Convert.ToDateTime(DateTime.Now.ToString());

I found this query which helped me find my locked table and query causing the issue.

SELECT  L.request_session_id AS SPID, 
        DB_NAME(L.resource_database_id) AS DatabaseName,
        O.Name AS LockedObjectName, 
        P.object_id AS LockedObjectId, 
        L.resource_type AS LockedResource, 
        L.request_mode AS LockType,
        ST.text AS SqlStatementText,        
        ES.login_name AS LoginName,
        ES.host_name AS HostName,
        TST.is_user_transaction as IsUserTransaction,
        AT.name as TransactionName,
        CN.auth_scheme as AuthenticationMethod
FROM    sys.dm_tran_locks L
        JOIN sys.partitions P ON P.hobt_id = L.resource_associated_entity_id
        JOIN sys.objects O ON O.object_id = P.object_id
        JOIN sys.dm_exec_sessions ES ON ES.session_id = L.request_session_id
        JOIN sys.dm_tran_session_transactions TST ON ES.session_id = TST.session_id
        JOIN sys.dm_tran_active_transactions AT ON TST.transaction_id = AT.transaction_id
        JOIN sys.dm_exec_connections CN ON CN.session_id = ES.session_id
        CROSS APPLY sys.dm_exec_sql_text(CN.most_recent_sql_handle) AS ST
WHERE   resource_database_id = db_id()
ORDER BY L.request_session_id

This "File Splitter" Windows command line program works nicely: https://github.com/dubasdey/File-Splitter

It's open source, simple, documented, proven, and worked for me.

Example:

fsplit -split 50 mb mylargefile.txt

In AndroidManifest.xml, don't forget to set:

 android:windowSoftInputMode="adjustResize"

and for RelativeLayout inside ScrollView ,set :

 android:layout_gravity="center" or android:layout_gravity="bottom" 

it will be okay

If you are using a reverse proxy such as nginx in between, you could define a custom token, such as X-API-Token.

In nginx you would rewrite it for the upstream proxy (your rest api) to be just auth:

proxy_set_header Authorization $http_x_api_token;

... while nginx can use the original Authorization header to check HTTP AUth.

It seems easy for me that use plt.savefig() function after plot() function:

import matplotlib.pyplot as plt
dtf = pd.DataFrame.from_records(d,columns=h)
dtf.plot()
plt.savefig('~/Documents/output.png')

This will never work, because the JS VM has moved on from that async_call and returned the value, which you haven't set yet.

Don't try to fight what is natural and built-in the language behaviour. You should use a callback technique or a promise.

function f(input, callback) {
    var value;

    // Assume the async call always succeed
    async_call(input, function(result) { callback(result) };

}

The other option is to use a promise, have a look at Q. This way you return a promise, and then you attach a then listener to it, which is basically the same as a callback. When the promise resolves, the then will trigger.

Both r+ and w+ can read and write to a file. However, r+ doesn't delete the content of the file and doesn't create a new file if such file doesn't exist, whereas w+ deletes the content of the file and creates it if it doesn't exist.

SELECT a.* FROM orders a INNER JOIN (SELECT course,MAX(id) as id FROM orders WHERE admission_id=".$id." GROUP BY course ) AS b ON a.course = b.course AND a.id = b.id

With the Above Query you will get unique records with where condition

Even if you want to accept numbers for the input, I would recommend using the text type.

<input type="text" name"some-number" />

Client-side run some jQuery validations to verify it's a number.

Then in your server side code, run some validation to verify it is in fact a numerical value.

You could use RAISE_APPLICATION_ERROR like this:

DECLARE
    ex_custom       EXCEPTION;
BEGIN
    RAISE ex_custom;
EXCEPTION
    WHEN ex_custom THEN
        RAISE_APPLICATION_ERROR(-20001,'My exception was raised');
END;
/

That will raise an exception that looks like:

ORA-20001: My exception was raised

The error number can be anything between -20001 and -20999.

Do configure --help and see what other options are available.

It is very common to provide different options to override different locations. By standard, --prefix overrides all of them, so you need to override config location after specifying the prefix. This course of actions usually works for every automake-based project.

The worse case scenario is when you need to modify the configure script, or even worse, generated makefiles and config.h headers. But yeah, for Xfce you can try something like this:

./configure --prefix=/home/me/somefolder/mybuild/output/target --sysconfdir=/etc 

I believe that should do it.

Do you mean this?

def perform(fun, *args):
    fun(*args)

def action1(args):
    # something

def action2(args):
    # something

perform(action1)
perform(action2, p)
perform(action3, p, r)

Pay attention on fact that Round rounds.

So (I don't know if it matters in your industry or not), but:

float a = 12.345f;
Math.Round(a,2);

//result:12,35, and NOT 12.34 !

To make it more precise for your case we can do something like this:

int aInt = (int)(a*100);
float aFloat= aInt /100.0f;
//result:12,34 

VAL1 and VAL2 need to be dimmed as integer, not as string, to be used as an argument for Cells, which takes integers, not strings, as arguments.

Dim val1 As Integer, val2 As Integer, i As Integer

For i = 1 To 333

  Sheets("Feuil2").Activate
  ActiveSheet.Cells(i, 1).Select

    val1 = Cells(i, 1).Value
    val2 = Cells(i, 2).Value

Sheets("Classeur2.csv").Select
Cells(val1, val2).Select

ActiveCell.FormulaR1C1 = "1"

Next i

Initial answer from 2013

If you don't mind something related to Bootstrap, an excellent (unofficial) Bootstrap Switch is available.

It uses radio types or checkboxes as switches. A type attribute has been added since V.1.8.

Source code is available on Github.

Note from 2018

I would not recommend to use those kind of old Switch buttons now, as they always seemed to suffer of usability issues as pointed by many people.

Please consider having a look at modern Switches like those.

Latest and greatest way to do this:

Node supports file and buffer operations with the base64 encoding:

const fs = require('fs');
const contents = fs.readFileSync('/path/to/file.jpg', {encoding: 'base64'});

Or using the new promises API:

const fs = require('fs').promises;
const contents = await fs.readFile('/path/to/file.jpg', {encoding: 'base64'});

Using Windows Powershell, if the following expression returns true, then it's a 64 bit OS:

(([Array](Get-WmiObject -Class Win32_Processor | Select-Object AddressWidth))[0].AddressWidth -eq 64)

This was taken and modified from: http://depsharee.blogspot.com/2011/06/how-do-detect-operating-system.html (Method #3). I've tested this on Win7 64 bit (in both 32 and 64 bit PowerShell sessions), and XP 32 bit.

The value of a sticky broadcast is the value that was last broadcast and is currently held in the sticky cache. This is not the value of a broadcast that was received right now. I suppose you can say it is like a browser cookie that you can access at any time. The sticky broadcast is now deprecated, per the docs for sticky broadcast methods (e.g.):

This method was deprecated in API level 21. Sticky broadcasts should not be used. They provide no security (anyone can access them), no protection (anyone can modify them), and many other problems. The recommended pattern is to use a non-sticky broadcast to report that something has changed, with another mechanism for apps to retrieve the current value whenever desired.

Old question but throwing my solution into the ring for completeness. I needed this when I needed a specific find but a different create if it doesn't exist.

def self.find_by_or_create_with(args, attributes) # READ CAREFULLY! args for finding, attributes for creating!
        obj = self.find_or_initialize_by(args)
        return obj if obj.persisted?
        return obj if obj.update_attributes(attributes) 
end

My understanding is that when the font is set as follows

body {
  font-size: 100%;
}

the browser will render the font as per the user settings for that browser.

The spec says that % is rendered

relative to parent element's font size

http://www.w3.org/TR/CSS1/#font-size

In this case, I take that to mean what the browser is set to.

If you're using routes (high probability) and your config has a reference to a controller in a module that's not declared as dependency then initialisation might fail too.

E.g assuming you've configured ngRoute for your app, like

angular.module('yourModule',['ngRoute'])
.config(function($routeProvider, $httpProvider) { ... });

Be careful in the block that declares the routes,

.when('/resourcePath', { 
templateUrl: 'resource.html',
controller: 'secondModuleController' //lives in secondModule
});

Declare secondModule as a dependency after 'ngRoute' should resolve the issue. I know I had this problem.

What is your Compatibility Level set to? If it's 90, it's working as designed. See this article.

In any case, why not just insert directly into the table?

Compare this, without using nonlocal:

x = 0
def outer():
    x = 1
    def inner():
        x = 2
        print("inner:", x)

    inner()
    print("outer:", x)

outer()
print("global:", x)

# inner: 2
# outer: 1
# global: 0

To this, using nonlocal, where inner()'s x is now also outer()'s x:

x = 0
def outer():
    x = 1
    def inner():
        nonlocal x
        x = 2
        print("inner:", x)

    inner()
    print("outer:", x)

outer()
print("global:", x)

# inner: 2
# outer: 2
# global: 0

If we were to use global, it would bind x to the properly "global" value:

x = 0
def outer():
    x = 1
    def inner():
        global x
        x = 2
        print("inner:", x)

    inner()
    print("outer:", x)

outer()
print("global:", x)

# inner: 2
# outer: 1
# global: 2

div { margin: auto; }

This will center your div.

Div by itself is a blockelement. Therefor you need to define the style to the div how to behave.

I know I am wayyy too late to write an answer for this question but nevertheless I think this will be use for anybody who is thinking of sending emails out via javascript.

The first way I would suggest is using a callback to do this on the server. If you really want it to be handled using javascript folowing is what I recommend.

The easiest way I found was using smtpJs. A free library which can be used to send emails.

1.Include the script like below

<script src="https://smtpjs.com/v3/smtp.js"></script>

2. You can either send an email like this

Email.send({_x000D_
    Host : "smtp.yourisp.com",_x000D_
    Username : "username",_x000D_
    Password : "password",_x000D_
    To : '[email protected]',_x000D_
    From : "[email protected]",_x000D_
    Subject : "This is the subject",_x000D_
    Body : "And this is the body"_x000D_
    }).then(_x000D_
      message => alert(message)_x000D_
    );

Which is not advisable as it will display your password on the client side.Thus you can do the following which encrypt your SMTP credentials, and lock it to a single domain, and pass a secure token instead of the credentials instead.

Email.send({_x000D_
    SecureToken : "C973D7AD-F097-4B95-91F4-40ABC5567812",_x000D_
    To : '[email protected]',_x000D_
    From : "[email protected]",_x000D_
    Subject : "This is the subject",_x000D_
    Body : "And this is the body"_x000D_
}).then(_x000D_
  message => alert(message)_x000D_
);

Finally if you do not have a SMTP server you use an smtp relay service such as Elastic Email

Also here is the link to the official SmtpJS.com website where you can find all the example you need and the place where you can create your secure token.

I hope someone find this details useful. Happy coding.

You are looking for the .remove() function.

http://docs.jquery.com/Manipulation/remove

If you by any means searched this topic because of the post page (index page alternative when using static front page), then the right answer is this:

if (get_option('show_on_front') == 'page') {
    $page_id = get_option('page_for_posts');
    echo get_the_title($page_id);
}

(taken from Forrst | Echo WordPress "Posts Page" title - Some code from tammyhart)

If you use

std::vector<std::reference_wrapper<std::string>> names{ };

Do not forget, when you use auto in the for loop, to use also get, like this:

for (auto element in : names)
{
    element.get()//do something
}

There is a hidden trick in the Python while ... else structure which can be used to simulate the double break without much code changes/additions. In essence if the while condition is false, the else block is triggered. Neither exceptions, continue or break trigger the else block. For more information see answers to "Else clause on Python while statement", or Python doc on while (v2.7).

while True:
    #snip: print out current state
    ok = ""
    while ok != "y" and ok != "n":
        ok = get_input("Is this ok? (y/n)")
        if ok == "n" or ok == "N":
            break    # Breaks out of inner loop, skipping else

    else:
        break        # Breaks out of outer loop

    #do more processing with menus and stuff

The only downside is that you need to move the double breaking condition into the while condition (or add a flag variable). Variations of this exists also for the for loop, where the else block is triggered after loop completion.

How about maintainability and constancy across application life cycles? Most data has a longer lifespan than the applications that make use of it. Relationships and data integrity are much too important to leave to the hope that the next dev team gets it right in the app code. If you haven't worked on a db with dirty data that doesn't respect the natural relationships, you will. The importance of data integrity will then become very clear.

I needed to find the position of an element inside a ListView and used this snippet that works kind of like .offset:

const UIManager = require('NativeModules').UIManager;
const handle = React.findNodeHandle(this.refs.myElement);
UIManager.measureLayoutRelativeToParent(
  handle, 
  (e) => {console.error(e)}, 
  (x, y, w, h) => {
    console.log('offset', x, y, w, h);
  });

This assumes I had a ref='myElement' on my component.

Just enable parsing of the autoexec.bat in the registry, using these instructions.

:: works only on windows vista and earlier 
Run REGEDT32.EXE.
Modify the following value within HKEY_CURRENT_USER: 

Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ParseAutoexec 

1 = autoexec.bat is parsed
0 = autoexec.bat is not parsed

Query-strings can be ignored by search engines.

A barebones wrapper of the functions as provided by the sqlite library. Latest version supports functions provided sqlite library 3.7.10

SQLiteWrapper project

Add a WHERE clause

UPDATE dbo.TestStudents  
SET     LASTNAME =  CASE  
                        WHEN LASTNAME = 'AAA' THEN 'BBB' 
                        WHEN LASTNAME = 'CCC' THEN 'DDD' 
                        WHEN LASTNAME = 'EEE' THEN 'FFF' 
                        ELSE LASTNAME
                    END 
WHERE   LASTNAME IN ('AAA', 'CCC', 'EEE')

sudo /usr/bin/easy_install pip

this command worked out for me

Add text-align: center; to the parent tag of <canvas>. That's it.

Example:

<div style="text-align: center">
    <canvas width="300" height="300">
        <!--your canvas code -->
    </canvas>
</div>

TL;DR/Notice:

If you experience a directory being created in place of the file you are trying to mount, you have probably failed to supply a valid and absolute path. This is a common mistake with a silent and confusing failure mode.

File volumes are done this way in docker (absolute path example (can use env variables), and you need to mention the file name) :

    volumes:
      - /src/docker/myapp/upload:/var/www/html/upload
      - /src/docker/myapp/upload/config.php:/var/www/html/config.php

You can also do:

    volumes:
      - ${PWD}/upload:/var/www/html/upload
      - ${PWD}/upload/config.php:/var/www/html/config.php

If you fire the docker-compose from /src/docker/myapp folder

I'm surprised nobody mentioned splitlines() yet.

with open ("data.txt", "r") as myfile:
    data = myfile.read().splitlines()

Variable data is now a list that looks like this when printed:

['LLKKKKKKKKMMMMMMMMNNNNNNNNNNNNN', 'GGGGGGGGGHHHHHHHHHHHHHHHHHHHHEEEEEEEE']

Note there are no newlines (\n).

At that point, it sounds like you want to print back the lines to console, which you can achieve with a for loop:

for line in data:
    print(line)

radiobuttonlist.selected <value> to process with your code.

A one line solution. Add this anywhere before calling the server on the client side:

System.Net.ServicePointManager.ServerCertificateValidationCallback += delegate { return true; };

This should only be used for testing purposes because the client will skip SSL/TLS security checks.

Inspect the element, then use this in the console

s = $($0).scope()
// `s` is the scope object if it exists

If still noting is working for you add the following styles on your page style sheet

.ui-widget-content .ui-state-default {
  border: 0px solid #d3d3d3;
  background: #00ACD6 50% 50% repeat-x;
  font-weight: normal;
  color: #fff;
}

It will change the background color of the dialog buttons.

unfortunately, there is not option to put number in whatsapp protocol. only is possible with parameter ABID (address Book ID), but you must have this contact with specific name to do this. check WhatsApp Documentation

Leaving another way here

git branch newbranch
git checkout master 
git merge newbranch 

I use jQuery prop

$('#yourCheckbox').change(function(){
  if($(this).prop("checked")) {
    $('#showDiv').show();
  } else {
    $('#hideDiv').hide();
  }
});

Eclipse - specific Project change JDK Version -

If you want to change any jdk version of A specific project than you have to click ---> Project --> JRE System Library --> Properties ---> Inside Classpath Container (JRE System Library) change the Execution Environment to which ever version you want e.g. 1.7 or 1.8.

This works with Windows 10, 8.x, 7, and possibly further back:

@echo Started: %date% %time%
.
.
.
@echo Completed: %date% %time%

enum can reduce many types of "errors" and make the code more manageable

#define STATE_GOOD 0
#define STATE_BAD 1
#define STATE_OTHER 2
int STATE = STATE_OTHER

The definition has no constraints. It's simply just a substitution. It is not able to limit all conditions of the state. When the STATE is assigned to 5, the program will be wrong, because there is no matching state. But the compiler is not going to warn STATE = 5

So it is better to use like this

typedef enum SampleState {
    SampleStateGood  = 0,
    SampleStateBad,
    SampleStateOther
} SampleState;

SampleState state = SampleStateGood;

Like this:

> df[df==""]<-NA
> df
     A    B
1 <NA>   12
2  xyz <NA>
3  jkl  100

You can call a stored procedure using the following syntax:

$result = mysql_query('CALL getNodeChildren(2)');

This could also happen if you are using CMake. If you have created a new class and you want to instantiate it, at the constructor call you will receive this error -even when the header and the cpp files are correct- if you have not modified CMakeLists.txt accordingly.

With CMake, every time you create a new class, before using it the header, the cpp files and any other compilable files (like Qt ui files) must be added to CMakeLists.txt and then re-run cmake . where CMakeLists.txt is stored.

For example, in this CMakeLists.txt file:

cmake_minimum_required(VERSION 2.8.11)

project(yourProject)

file(GLOB ImageFeatureDetector_SRC *.h *.cpp)

### Add your new files here ###
add_executable(yourProject YourNewClass.h YourNewClass.cpp otherNewFile.ui})

target_link_libraries(imagefeaturedetector ${SomeLibs})

If you are using the command file(GLOB yourProject_SRC *.h *.cpp) then you just need to re-run cmake . without modifying CMakeLists.txt.

All above questions are correct but if you want the hostname and domain name try this:

 [System.Net.DNS]::GetHostByName('').HostName

Go to Files menu -> Preference -> Extentions Then type CSS Formatter wait for it to load and click install

I am doing this programmatically, and I simply moved my addSubview(tableView) to the bottom after adding all of my other subviews, and it solved my problem!

Not sure why this only appears on device and not my simulator, but either way at least there is a simple solution!

DF <- data.frame(x=letters[1:5], y=1:5, stringsAsFactors=FALSE)

str(DF)
#'data.frame':  5 obs. of  2 variables:
# $ x: chr  "a" "b" "c" "d" ...
# $ y: int  1 2 3 4 5

The (annoying) default of as.data.frame is to turn all character columns into factor columns. You can use that here:

DF <- as.data.frame(unclass(DF))
str(DF)
#'data.frame':  5 obs. of  2 variables:
# $ x: Factor w/ 5 levels "a","b","c","d",..: 1 2 3 4 5
# $ y: int  1 2 3 4 5

I had this problem as well, until I came up with this method.

public static int[] indexesOf(String s, String flag) {
    int flagLen = flag.length();
    String current = s;
    int[] res = new int[s.length()];
    int count = 0;
    int base = 0;
    while(current.contains(flag)) {
        int index = current.indexOf(flag);
        res[count] = index + base;
        base += index + flagLen;
        current = current.substring(current.indexOf(flag) + flagLen, current.length());
        ++ count;
    }
    return Arrays.copyOf(res, count);
}

This method can be used to find indexes of any flag of any length in a string, for example:

public class Main {

    public static void main(String[] args) {
        int[] indexes = indexesOf("Hello, yellow jello", "ll");

        // Prints [2, 9, 16]
        System.out.println(Arrays.toString(indexes));
    }

    public static int[] indexesOf(String s, String flag) {
        int flagLen = flag.length();
        String current = s;
        int[] res = new int[s.length()];
        int count = 0;
        int base = 0;
        while(current.contains(flag)) {
            int index = current.indexOf(flag);
            res[count] = index + base;
            base += index + flagLen;
            current = current.substring(current.indexOf(flag) + flagLen, current.length());
            ++ count;
        }
        return Arrays.copyOf(res, count);
    }
}

Use expression(delta) where 'delta' for lowercase d and 'Delta' to get capital ?.

Here's full list of Greek characters:

? a alpha
? ß beta
G ? gamma
? d delta
? e epsilon
? ? zeta
? ? eta
T ? theta
? ? iota
? ? kappa
? ? lambda
? µ mu
? ? nu
? ? xi
? ? omicron
? p pi
? ? rho
S s sigma
? t tau
? ? upsilon
F f phi
? ? chi
? ? psi
O ? omega

EDIT: Copied from comments, when using in conjunction with other words use like: expression(Delta*"price")

You can also load the body of the script and execute it within the same process:

Set fs = CreateObject("Scripting.FileSystemObject")
Set ts = fs.OpenTextFile("script2.vbs")
body = ts.ReadAll
ts.Close
Execute body

This will work for you:

use [ANALYTICS]  ---> put your DB name here
GO
SELECT sm.object_id, OBJECT_NAME(sm.object_id) AS object_name, o.type, o.type_desc, sm.definition
FROM sys.sql_modules AS sm
JOIN sys.objects AS o ON sm.object_id = o.object_id
where sm.definition like '%SEARCH_WORD_HERE%' collate SQL_Latin1_General_CP1_CI_AS
ORDER BY o.type;
GO

Answer of @zolley is right. Just adding a Gif and steps for the reference.

1. Goto menu Format > Conditional formatting..
2. Find Format cells if..
3. Add =countif(A:A,A1)>1 in field Custom formula is
   • Note: Change the letter A with your own column.

Above answers are perfect. However I wanted to vibrate my app exactly twice on button click and this small information is missing here, hence posting for future readers like me. :)

We have to follow as mentioned above and the only change will be in the vibrate pattern as below,

long[] pattern = {0, 100, 1000, 300};
v.vibrate(pattern, -1); //-1 is important

This will exactly vibrate twice. As we already know

1. 0 is for delay
2. 100 says vibrate for 100ms for the first time
3. next comes delay of 1000ms
4. and post that vibrate again for 300ms

One can go on and on mentioning delay and vibration alternatively (e.g. 0, 100, 1000, 300, 1000, 300 for 3 vibrations and so on..) but remember @Dave's word use it responsibly. :)

Also note here that the repeat parameter is set to -1 which means the vibration will happen exactly as mentioned in the pattern. :)

Anding an integer with 0xFF leaves only the least significant byte. For example, to get the first byte in a short s, you can write s & 0xFF. This is typically referred to as "masking". If byte1 is either a single byte type (like uint8_t) or is already less than 256 (and as a result is all zeroes except for the least significant byte) there is no need to mask out the higher bits, as they are already zero.

See tristopiaPatrick Schlüter's answer below when you may be working with signed types. When doing bitwise operations, I recommend working only with unsigned types.

Using a Windows 10 guest, after I performed steps 1 through 3 from @xinampc's answer, I had to open a new File Explorer and navigated to This PC > CD Drive (D:) VirtualBox Guest Additions to run VBoxWindowsAdditions. After I ran that and went through the command prompts, Windows rebooted and I was able to see VBOXSVR under Network.

The following also seems to work :

for (vector<int>::iterator it = res.begin(); it != res.end(); it++)
{
  res.erase(it--);
}

Not sure if there's any flaw in this ?

I had similar error: "Expecting value: line 1 column 1 (char 0)"

It helped for me to add "myfile.seek(0)", move the pointer to the 0 character

with open(storage_path, 'r') as myfile:
if len(myfile.readlines()) != 0:
    myfile.seek(0)
    Bank_0 = json.load(myfile)

By implementing interfaces you are achieving composition ("has-a" relationships) instead of inheritance ("is-a" relationships). That is an important principle to remember when it comes to things like design patterns where you need to use interfaces to achieve a composition of behaviors instead of an inheritance.

Solution:

Set the property RetainSameConnection on the Connection Manager to True so that temporary table created in one Control Flow task can be retained in another task.

Here is a sample SSIS package written in SSIS 2008 R2 that illustrates using temporary tables.

Walkthrough:

Create a stored procedure that will create a temporary table named ##tmpStateProvince and populate with few records. The sample SSIS package will first call the stored procedure and then will fetch the temporary table data to populate the records into another database table. The sample package will use the database named Sora Use the below create stored procedure script.

USE Sora;
GO

CREATE PROCEDURE dbo.PopulateTempTable
AS
BEGIN
    
    SET NOCOUNT ON;

    IF OBJECT_ID('TempDB..##tmpStateProvince') IS NOT NULL
        DROP TABLE ##tmpStateProvince;

    CREATE TABLE ##tmpStateProvince
    (
            CountryCode     nvarchar(3)         NOT NULL
        ,   StateCode       nvarchar(3)         NOT NULL
        ,   Name            nvarchar(30)        NOT NULL
    );

    INSERT INTO ##tmpStateProvince 
        (CountryCode, StateCode, Name)
    VALUES
        ('CA', 'AB', 'Alberta'),
        ('US', 'CA', 'California'),
        ('DE', 'HH', 'Hamburg'),
        ('FR', '86', 'Vienne'),
        ('AU', 'SA', 'South Australia'),
        ('VI', 'VI', 'Virgin Islands');
END
GO

Create a table named dbo.StateProvince that will be used as the destination table to populate the records from temporary table. Use the below create table script to create the destination table.

USE Sora;
GO

CREATE TABLE dbo.StateProvince
(
        StateProvinceID int IDENTITY(1,1)   NOT NULL
    ,   CountryCode     nvarchar(3)         NOT NULL
    ,   StateCode       nvarchar(3)         NOT NULL
    ,   Name            nvarchar(30)        NOT NULL
    CONSTRAINT [PK_StateProvinceID] PRIMARY KEY CLUSTERED
        ([StateProvinceID] ASC)
) ON [PRIMARY];
GO

Create an SSIS package using Business Intelligence Development Studio (BIDS). Right-click on the Connection Managers tab at the bottom of the package and click New OLE DB Connection... to create a new connection to access SQL Server 2008 R2 database.

Click New... on Configure OLE DB Connection Manager.

Perform the following actions on the Connection Manager dialog.

• Select Native OLE DB\SQL Server Native Client 10.0 from Provider since the package will connect to SQL Server 2008 R2 database
• Enter the Server name, like MACHINENAME\INSTANCE
• Select Use Windows Authentication from Log on to the server section or whichever you prefer.
• Select the database from Select or enter a database name, the sample uses the database name Sora.
• Click Test Connection
• Click OK on the Test connection succeeded message.
• Click OK on Connection Manager

The newly created data connection will appear on Configure OLE DB Connection Manager. Click OK.

OLE DB connection manager KIWI\SQLSERVER2008R2.Sora will appear under the Connection Manager tab at the bottom of the package. Right-click the connection manager and click Properties

Set the property RetainSameConnection on the connection KIWI\SQLSERVER2008R2.Sora to the value True.

Right-click anywhere inside the package and then click Variables to view the variables pane. Create the following variables.

• A new variable named PopulateTempTable of data type String in the package scope SO_5631010 and set the variable with the value EXEC dbo.PopulateTempTable.

• A new variable named FetchTempData of data type String in the package scope SO_5631010 and set the variable with the value SELECT CountryCode, StateCode, Name FROM ##tmpStateProvince

Drag and drop an Execute SQL Task on to the Control Flow tab. Double-click the Execute SQL Task to view the Execute SQL Task Editor.

On the General page of the Execute SQL Task Editor, perform the following actions.

• Set the Name to Create and populate temp table
• Set the Connection Type to OLE DB
• Set the Connection to KIWI\SQLSERVER2008R2.Sora
• Select Variable from SQLSourceType
• Select User::PopulateTempTable from SourceVariable
• Click OK

Drag and drop a Data Flow Task onto the Control Flow tab. Rename the Data Flow Task as Transfer temp data to database table. Connect the green arrow from the Execute SQL Task to the Data Flow Task.

Double-click the Data Flow Task to switch to Data Flow tab. Drag and drop an OLE DB Source onto the Data Flow tab. Double-click OLE DB Source to view the OLE DB Source Editor.

On the Connection Manager page of the OLE DB Source Editor, perform the following actions.

• Select KIWI\SQLSERVER2008R2.Sora from OLE DB Connection Manager
• Select SQL command from variable from Data access mode
• Select User::FetchTempData from Variable name
• Click Columns page

Clicking Columns page on OLE DB Source Editor will display the following error because the table ##tmpStateProvince specified in the source command variable does not exist and SSIS is unable to read the column definition.

To fix the error, execute the statement EXEC dbo.PopulateTempTable using SQL Server Management Studio (SSMS) on the database Sora so that the stored procedure will create the temporary table. After executing the stored procedure, click Columns page on OLE DB Source Editor, you will see the column information. Click OK.

Drag and drop OLE DB Destination onto the Data Flow tab. Connect the green arrow from OLE DB Source to OLE DB Destination. Double-click OLE DB Destination to open OLE DB Destination Editor.

On the Connection Manager page of the OLE DB Destination Editor, perform the following actions.

• Select KIWI\SQLSERVER2008R2.Sora from OLE DB Connection Manager
• Select Table or view - fast load from Data access mode
• Select [dbo].[StateProvince] from Name of the table or the view
• Click Mappings page

Click Mappings page on the OLE DB Destination Editor would automatically map the columns if the input and output column names are same. Click OK. Column StateProvinceID does not have a matching input column and it is defined as an IDENTITY column in database. Hence, no mapping is required.

Data Flow tab should look something like this after configuring all the components.

Click the OLE DB Source on Data Flow tab and press F4 to view Properties. Set the property ValidateExternalMetadata to False so that SSIS would not try to check for the existence of the temporary table during validation phase of the package execution.

Execute the query select * from dbo.StateProvince in the SQL Server Management Studio (SSMS) to find the number of rows in the table. It should be empty before executing the package.

Execute the package. Control Flow shows successful execution.

In Data Flow tab, you will notice that the package successfully processed 6 rows. The stored procedure created early in this posted inserted 6 rows into the temporary table.

Execute the query select * from dbo.StateProvince in the SQL Server Management Studio (SSMS) to find the 6 rows successfully inserted into the table. The data should match with rows founds in the stored procedure.

The above example illustrated how to create and use temporary table within a package.