Tested in iphone. Just use this css on target element container and it will change the scrolling behaviour, which stops when finger leaves the screen.

-webkit-overflow-scrolling: auto

https://developer.mozilla.org/en-US/docs/Web/CSS/-webkit-overflow-scrolling

"A singleton with parameters is not a singleton" statement is not completely correct. We need to analyze this from the application perspective rather than from the code perspective.

We build singleton class to create a single instance of an object in one application run. By having a constructor with parameter, you can build flexibility into your code to change some attributes of your singleton object every time you run you application. This is not a violation of Singleton pattern. It looks like a violation if you see this from code perspective.

Design Patterns are there to help us write flexible and extendable code, not to hinder us writing good code.

You can use this:

bankHoliday= [1, 0, 1, 1, 2, 0, 0, 1, 0, 0, 0, 2] #gives the list of bank holidays in each month

def bank_holiday(month):
   month -= 1#Takes away the numbers from the months, as months start at 1 (January) not at 0. There is no 0 month.
   print(bankHoliday[month])

bank_holiday(int(input("Which month would you like to check out: ")))

I do it like this:

(Shortened the code a bit)

public struct Age
{
    public readonly int Years;
    public readonly int Months;
    public readonly int Days;

}

public Age( int y, int m, int d ) : this()
{
    Years = y;
    Months = m;
    Days = d;
}

public static Age CalculateAge ( DateTime birthDate, DateTime anotherDate )
{
    if( startDate.Date > endDate.Date )
        {
            throw new ArgumentException ("startDate cannot be higher then endDate", "startDate");
        }

        int years = endDate.Year - startDate.Year;
        int months = 0;
        int days = 0;

        // Check if the last year, was a full year.
        if( endDate < startDate.AddYears (years) && years != 0 )
        {
            years--;
        }

        // Calculate the number of months.
        startDate = startDate.AddYears (years);

        if( startDate.Year == endDate.Year )
        {
            months = endDate.Month - startDate.Month;
        }
        else
        {
            months = ( 12 - startDate.Month ) + endDate.Month;
        }

        // Check if last month was a complete month.
        if( endDate < startDate.AddMonths (months) && months != 0 )
        {
            months--;
        }

        // Calculate the number of days.
        startDate = startDate.AddMonths (months);

        days = ( endDate - startDate ).Days;

        return new Age (years, months, days);
}

// Implement Equals, GetHashCode, etc... as well
// Overload equality and other operators, etc...

}

cp -Rvn /source/path/* /destination/path/
cp: /destination/path/any.zip: No such file or directory

It will create no existing paths in destination, if path have a source file inside. This dont create empty directories.

A moment ago i've seen xxxxxxxx: No such file or directory, because i run out of free space. without error message.

with ditto:

ditto -V /source/path/* /destination/path
ditto: /destination/path/any.zip: No space left on device

once freed space cp -Rvn /source/path/* /destination/path/ works as expected

In Android Studio

1. Menu -> Edit -> Select All
2. Menu -> Edit -> Copy

3. Open new Notepad.exe

In Notepad

4. Menu -> Edit -> Paste
5. Menu -> Edit -> Select All
6. Menu -> Edit -> Copy 

Back In Android Studio

7. Menu -> Edit -> Paste

this is to further clarify JD Isaaks answer ...

The problem you run into often is that you are using php to output html from many different php sources, and those sources are often, for whatever reason, outputting via different ways.

Sometimes you have literal html content that you want to directly output to the browser; other times the output is being dynamically created (server-side).

The dynamic content is always(?) going to be a string. Now you have to combine this stringified dynamic html with any literal, direct-to-display html ... into one meaningful html node structure.

This usually forces the developer to wrap all that direct-to-display content into a string (as JD Isaak was discussing) so that it can be properly delivered/inserted in conjunction with the dynamic html ... even though you don't really want it wrapped.

But by using ob_## methods you can avoid that string-wrapping mess. The literal content is, instead, output to the buffer. Then in one easy step the entire contents of the buffer (all your literal html), is concatenated into your dynamic-html string.

(My example shows literal html being output to the buffer, which is then added to a html-string ... look also at JD Isaaks example to see string-wrapping-of-html).

<?php // parent.php

//---------------------------------
$lvs_html  = "" ;

$lvs_html .= "<div>html</div>" ;
$lvs_html .= gf_component_assembler__without_ob( ) ;
$lvs_html .= "<div>more html</div>" ;

$lvs_html .= "----<br/>" ;

$lvs_html .= "<div>html</div>" ;
$lvs_html .= gf_component_assembler__with_ob( ) ;
$lvs_html .= "<div>more html</div>" ;

echo $lvs_html ;    
//    02 - component contents
//    html
//    01 - component header
//    03 - component footer
//    more html
//    ----
//    html
//    01 - component header
//    02 - component contents
//    03 - component footer
//    more html 

//---------------------------------
function gf_component_assembler__without_ob( ) 
  { 
    $lvs_html  = "<div>01 - component header</div>" ; // <table ><tr>" ;
    include( "component_contents.php" ) ;
    $lvs_html .= "<div>03 - component footer</div>" ; // </tr></table>" ;

    return $lvs_html ;
  } ;

//---------------------------------
function gf_component_assembler__with_ob( ) 
  { 
    $lvs_html  = "<div>01 - component header</div>" ; // <table ><tr>" ;

        ob_start();
        include( "component_contents.php" ) ;
    $lvs_html .= ob_get_clean();

    $lvs_html .= "<div>03 - component footer</div>" ; // </tr></table>" ;

    return $lvs_html ;
  } ;

//---------------------------------
?>

<!-- component_contents.php -->
  <div>
    02 - component contents
  </div>

FilenameUtils to the rescue:

String filename = FilenameUtils.getName("/storage/sdcard0/DCIM/Camera/1414240995236.jpg");

public boolean onKeyDown(int keycode, KeyEvent event) {
    if (keycode == KeyEvent.KEYCODE_BACK) {
        moveTaskToBack(true);
    }
    return super.onKeyDown(keycode, event);
}

My app closed with above code.

Check this out.
http://jsfiddle.net/LD55x/

Code:

var myobj = {};
myobj.name="javascriptisawesome";
myobj.age=25;
myobj.mobile=123456789;
debugger;
var str = JSON.stringify(myobj);
alert(str);
var obj = JSON.parse(str);
alert(obj);

I had an issue similar to this and found out is was due to a default .Net framework setting

Sqlcommand.Timeout

http://msdn.microsoft.com/en-us/library/system.data.sqlclient.sqlcommand.commandtimeout(v=VS.100).aspx

The default is 30 seconds as sated in the above url by Microsoft, try setting this to a higher number of seconds or maybe -1 before opening the connection to see if this solves the issue.

It maybe a setting in your web.config or app.config files or on you applicaiton / web server config files.

This works for me.

Place the following in your package.json file

"scripts": {
    "preinstall": "npm install ../my-own-module/"
}

In short, place black behind the image, and lower the opactiy. You can do this by wrapping the image within a div, and then lowering the opacity of the image.

For example:

<!DOCTYPE html>

<style>
    .img-wrap {
        background: black;
        display: inline-block;
        line-height: 0;
    }
        .img-wrap > img {
            opacity: 0.8;
        }
</style>

<div class="img-wrap">
    <img src="http://mikecane.files.wordpress.com/2007/03/kitten.jpg" />
</div>

Here is a JSFiddle.

select UTF-8 enconding when importing. if you use Office 2007 this is where you chose it : right after you open the file.

First of all try this

sudo apt-get update
sudo apt-get clean
sudo apt-get autoremove

If error still persists then do this

sudo apt --fix-broken install
sudo apt-get update && sudo apt-get upgrade
sudo dpkg --configure -a
sudo apt-get install -f

Afterwards try this again:

sudo apt-get install npm

But if it still couldn't resolve issues check for the dependencies using sudo dpkg --configure -a and remove them one-by-one . Let's say dependencies are on npm then go for this ,

sudo apt-get remove nodejs
sudo apt-get remove npm

Then go to /etc/apt/sources.list.d and remove any node list if you have. Then do a

sudo apt-get update

Then check for the dependencies problem again using sudo dpkg --configure -a and if it's all clear then you are done . Later on install npm again using this

v=8   # set to 4, 5, 6, ... as needed
curl -sL https://deb.nodesource.com/setup_$v.x | sudo -E bash -

Then install the Node.js package.

sudo apt-get install -y nodejs

The answer above will work for general cases also(for dependencies on other packages like django ,etc) just after first two processes use the same process for the package you are facing dependency with.

If you want to do something x times, you can do this:

Example (x = 200):

FOR /L %%A IN (1,1,200) DO (
  ECHO %%A
)

1,1,200 means:

• Start = 1
• Increment per step = 1
• End = 200

<form id="uploadbanner" enctype="multipart/form-data" method="post" action="#">
   <input id="fileupload" name="myfile" type="file" />
   <input type="submit" value="submit" id="submit" />
</form>

To upload a file, it is essential to set enctype="multipart/form-data" on your form

You need that form type and then some php to process the file :)

You should probably check out Uploadify if you want something very customisable out of the box.

reference here

!== is the strict not equal operator and only returns a value of true if both the operands are not equal and/or not of the same type. The following examples return a Boolean true:

a !== b 
a !== "2" 
4 !== '4' 

int is a primitive, null is not a value that it can take on. You could change the method return type to return java.lang.Integer and then you can return null, and existing code that returns int will get autoboxed.

Nulls are assigned only to reference types, it means the reference doesn't point to anything. Primitives are not reference types, they are values, so they are never set to null.

Using the object wrapper java.lang.Integer as the return value means you are passing back an Object and the object reference can be null.

WScript.exe exists in two versions, one in C:\Windows\System32\ and the other in C:\Windows\SysWOW64\ directories. They run respectively in 64 bits and 32 bits (against immediate logic but true).

You may add the following code at the beginning of your script so that it automatically starts again in 32 bits if it detects that it's called in 64 bits.

Note that it transmits the arguments if it calls itself to switch to 64 bits.

' C:\Windows\System32\WScript.exe = WScript.exe
Dim ScriptHost : ScriptHost = Mid(WScript.FullName, InStrRev(WScript.FullName, "\") + 1, Len(WScript.FullName))

Dim oWs : Set oWs = CreateObject("WScript.Shell")
Dim oProcEnv : Set oProcEnv = oWs.Environment("Process")

' Am I running 64-bit version of WScript.exe/Cscript.exe? So, call script again in x86 script host and then exit.
If InStr(LCase(WScript.FullName), LCase(oProcEnv("windir") & "\System32\")) And oProcEnv("PROCESSOR_ARCHITECTURE") = "AMD64" Then
    ' rebuild arguments
    If Not WScript.Arguments.Count = 0 Then
        Dim sArg, Arg
        sArg = ""
        For Each Arg In Wscript.Arguments
              sArg = sArg & " " & """" & Arg & """"
        Next
    End If

    Dim sCmd : sCmd = """" &  oProcEnv("windir") & "\SysWOW64\" & ScriptHost & """" & " """ & WScript.ScriptFullName & """" & sArg
    'WScript.Echo "Call " & sCmd
    oWs.Run sCmd
    WScript.Quit
End If

Here is the compressive in detailed explanation with the help of above posts:

1. Math.trunc() : It is used to remove those digits which are followed by dot. It converts implicitly. But, not supported in IE.

Example:

Math.trunc(10.5) // 10

Math.trunc(-10.5) // -10

Other Alternative way: Use of bitwise not operator:

Example:

x= 5.5

~~x // 5

2. Math.floor() : It is used to give the minimum integer value posiible. It is supported in all browsers.

Example:

Math.floor(10.5) // 10

Math.floor( -10.5) // -11

3. Math.ceil() : It is used to give the highest integer value possible. It is supported in all browsers.

Example:

Math.ceil(10.5) // 11

Math.ceil(-10.5) // -10

4. Math.round() : It is rounded to the nearest integer. It is supported in all browsers.

Example:

Math.round(10.5) // 11

Math.round(-10.5)// -10

Math.round(10.49) // 10

Math.round(-10.51) // -11

If the hidden purpose of your question is to DROP the index before making INSERT to a large table, then this is useful one-liner:

DROP INDEX IF EXISTS [IndexName] ON [dbo].[TableName]

This syntax is available since SQL Server 2016. Documentation for IF EXISTS:

https://blogs.msdn.microsoft.com/sqlserverstorageengine/2015/11/03/drop-if-exists-new-thing-in-sql-server-2016/

In case you deal with a primery key instead, then use this:

ALTER TABLE [TableName] DROP CONSTRAINT IF EXISTS [PK_name] 

The best is QSpinBox.

And for a double value use QDoubleSpinBox.

QSpinBox myInt;
myInt.setMinimum(-5);
myInt.setMaximum(5);
myInt.setSingleStep(1);// Will increment the current value with 1 (if you use up arrow key) (if you use down arrow key => -1)
myInt.setValue(2);// Default/begining value
myInt.value();// Get the current value
//connect(&myInt, SIGNAL(valueChanged(int)), this, SLOT(myValueChanged(int)));

1) Instead of PreparedStatement use Statement

2) After executing query in ResultSet, extract values with the help of rs.getString() as :

Statement st=cn.createStatement();
ResultSet rs=st.executeQuery(sql);
while(rs.next())
{
    rs.getString(1); //or rs.getString("column name");
}

There are many algorithm to count the set bits; but i think the best one is the faster one! You can see the detailed on this page:

Bit Twiddling Hacks

I suggest this one:

Counting bits set in 14, 24, or 32-bit words using 64-bit instructions

unsigned int v; // count the number of bits set in v
unsigned int c; // c accumulates the total bits set in v

// option 1, for at most 14-bit values in v:
c = (v * 0x200040008001ULL & 0x111111111111111ULL) % 0xf;

// option 2, for at most 24-bit values in v:
c =  ((v & 0xfff) * 0x1001001001001ULL & 0x84210842108421ULL) % 0x1f;
c += (((v & 0xfff000) >> 12) * 0x1001001001001ULL & 0x84210842108421ULL) 
     % 0x1f;

// option 3, for at most 32-bit values in v:
c =  ((v & 0xfff) * 0x1001001001001ULL & 0x84210842108421ULL) % 0x1f;
c += (((v & 0xfff000) >> 12) * 0x1001001001001ULL & 0x84210842108421ULL) % 
     0x1f;
c += ((v >> 24) * 0x1001001001001ULL & 0x84210842108421ULL) % 0x1f;

This method requires a 64-bit CPU with fast modulus division to be efficient. The first option takes only 3 operations; the second option takes 10; and the third option takes 15.

You can use the moment.js library for this. I am using only to get time-specific output but you can select what kind of format you want to select.

Reference:

1. moment library: https://momentjs.com/

2. time and date specific functions: https://timestamp.online/article/how-to-convert-timestamp-to-datetime-in-javascript

convertDate(date) {
        var momentDate = moment(date).format('hh : mm A');
        return momentDate;
}

and you can call this method like:

this.convertDate('2020-05-01T10:31:18.837Z');

I hope it helps. Enjoy coding.

This is strange behavior and although I am unable to say why this is occurring, I can recommend some options.

First, an observation. If you include the image as Content in VS and copy it to the output directory, your code works. If the image is marked as None in VS and you copy it over, it doesn't work.

Solution 1: FileStream

The BitmapImage object accepts a UriSource or StreamSource as a parameter. Let's use StreamSource instead.

        FileStream stream = new FileStream("picture.png", FileMode.Open, FileAccess.Read);
        Image i = new Image();
        BitmapImage src = new BitmapImage();
        src.BeginInit();
        src.StreamSource = stream;
        src.EndInit();
        i.Source = src;
        i.Stretch = Stretch.Uniform;
        panel.Children.Add(i);

The problem: stream stays open. If you close it at the end of this method, the image will not show up. This means that the file stays write-locked on the system.

Solution 2: MemoryStream

This is basically solution 1 but you read the file into a memory stream and pass that memory stream as the argument.

        MemoryStream ms = new MemoryStream();
        FileStream stream = new FileStream("picture.png", FileMode.Open, FileAccess.Read);
        ms.SetLength(stream.Length);
        stream.Read(ms.GetBuffer(), 0, (int)stream.Length);

        ms.Flush();
        stream.Close();

        Image i = new Image();
        BitmapImage src = new BitmapImage();
        src.BeginInit();
        src.StreamSource = ms;
        src.EndInit();
        i.Source = src;
        i.Stretch = Stretch.Uniform;
        panel.Children.Add(i);

Now you are able to modify the file on the system, if that is something you require.

Composition v/s Inheritance is a wide subject. There is no real answer for what is better as I think it all depends on the design of the system.

Generally type of relationship between object provide better information to choose one of them.

If relation type is "IS-A" relation then Inheritance is better approach. otherwise relation type is "HAS-A" relation then composition will better approach.

Its totally depend on entity relationship.

Just use

<a [ngClass]="{'disabled': your_condition}"> This a tag is disabled</a>

Example:

 <a [ngClass]="{'disabled': name=='junaid'}"> This a tag is disabled</a>

To see a frequency count for column two (for example):

awk -F '\t' '{print $2}' * | sort | uniq -c | sort -nr

fileA.txt

z    z    a
a    b    c
w    d    e

fileB.txt

t    r    e
z    d    a
a    g    c

fileC.txt

z    r    a
v    d    c
a    m    c

Result:

  3 d
  2 r
  1 z
  1 m
  1 g
  1 b

You should not define global variables in header files. You can declare them as extern in header file and define them in a .c source file.

(Note: In C, int i; is a tentative definition, it allocates storage for the variable (= is a definition) if there is no other definition found for that variable in the translation unit.)

$('.price').blur(function () {
    var sum = 0;
    $('.price').each(function() {

        if($(this).val()!="")
         {
            sum += parseFloat($(this).val());
         }

    });
        alert(sum);
});?????????

JS Fiddle

You are using Python 2 methodology instead of Python 3.

Change:

outfile=open('./immates.csv','wb')

To:

outfile=open('./immates.csv','w')

and you will get a file with the following output:

SNo,States,Dist,Population
1,Andhra Pradesh,13,49378776
2,Arunachal Pradesh,16,1382611
3,Assam,27,31169272
4,Bihar,38,103804637
5,Chhattisgarh,19,25540196
6,Goa,2,1457723
7,Gujarat,26,60383628
.....

In Python 3 csv takes the input in text mode, whereas in Python 2 it took it in binary mode.

Edited to Add

Here is the code I ran:

url='http://www.mapsofindia.com/districts-india/'
html = urllib.request.urlopen(url).read()
soup = BeautifulSoup(html)
table=soup.find('table', attrs={'class':'tableizer-table'})
list_of_rows=[]
for row in table.findAll('tr')[1:]:
    list_of_cells=[]
    for cell in row.findAll('td'):
        list_of_cells.append(cell.text)
    list_of_rows.append(list_of_cells)
outfile = open('./immates.csv','w')
writer=csv.writer(outfile)
writer.writerow(['SNo', 'States', 'Dist', 'Population'])
writer.writerows(list_of_rows)

You can use commercial tools like Sisulizer. It will create satellite assembly for each language. Only thing you should pay attention is not to obfuscate form class names (if you use obfuscator).

begin() returns the first pair, (precisely, an iterator to the first pair, and you can access the key/value as ->first and ->second of that iterator)

@Grantismo gives a great overview of Android sync components.

SyncManagerAndroid library provides a simple 2-way sync implementation to plug into the Android Sync framework (AbstractThreadedSyncAdapter.OnPerformSync).

https://github.com/sschendel/SyncManagerAndroid

I'm not properly answering the question but, I think it makes sense to clear why we should specify the radix.

On MDN documentation we can read that:

If radix is undefined or 0 (or absent), JavaScript assumes the following:

• [...]
• If the input string begins with "0", radix is eight (octal) or 10 (decimal). Exactly which radix is chosen is implementation-dependent. ECMAScript 5 specifies that 10 (decimal) is used, but not all browsers support this yet. For this reason always specify a radix when using parseInt.
• [...]

Source: MDN parseInt()

You would do that when the responsibility of creating/updating the referenced column isn't in the current entity, but in another entity.

You haven't stated where you're looking for the element. If it's within the scope of a controller, it is possible, despite the chorus you'll hear about it not being the 'Angular Way'. The chorus is right, but sometimes, in the real world, it's unavoidable. (If you disagree, get in touch—I have a challenge for you.)

If you pass $element into a controller, like you would $scope, you can use its find() function. Note that, in the jQueryLite included in Angular, find() will only locate tags by name, not attribute. However, if you include the full-blown jQuery in your project, all the functionality of find() can be used, including finding by attribute.

So, for this HTML:

<div ng-controller='MyCtrl'>
    <div>
        <div name='foo' class='myElementClass'>this one</div>
    </div>
</div>

This AngularJS code should work:

angular.module('MyClient').controller('MyCtrl', [
    '$scope',
    '$element',
    '$log',
    function ($scope, $element, $log) {

        // Find the element by its class attribute, within your controller's scope
        var myElements = $element.find('.myElementClass');

        // myElements is now an array of jQuery DOM elements

        if (myElements.length == 0) {
            // Not found. Are you sure you've included the full jQuery?
        } else {
            // There should only be one, and it will be element 0
            $log.debug(myElements[0].name); // "foo"
        }

    }
]);

Another option altogether is to detach the database via Management Studio. Then simply delete the log file, or rename it and delete later.

Back in Management Studio attach the database again. In the attach window remove the log file from list of files.

The DB attaches and creates a new empty log file. After you check everything is all right, you can delete the renamed log file.

You probably ought not use this for production databases.

Do you want your function to react to an array argument or variable arguments? If the latter, try:

var func = function(...rest) {
  alert(rest.length);

  // In JS, don't use for..in with arrays
  // use for..of that consumes array's pre-defined iterator
  // or a more functional approach
  rest.forEach((v) => console.log(v));
};

But if you wish to handle an array argument

var fn = function(arr) {
  alert(arr.length);

  for(var i of arr) {
    console.log(i);
  }
};

There's a truly horrifying amount of ancient code out there in the wild, much of it in the form of common CPAN modules. I've found I have to be fairly careful enabling Unicode if I use external modules that might be affected by it, and am still trying to identify and fix some Unicode-related failures in several Perl scripts I use regularly (in particular, iTiVo fails badly on anything that's not 7-bit ASCII due to transcoding issues).

In matrix multiplication there are 3 for loop, we are using since execution of each for loop requires time complexity O(n). So for three loops it becomes O(n^3)

this is useful to know about hashcode in java :

http://eclipsesource.com/blogs/2012/09/04/the-3-things-you-should-know-about-hashcode/

My answer would be "be careful". A lot of jQuery table-sorting add-ons only sort what you pass to the browser. In many cases, you have to keep in mind that tables are dynamic sets of data, and could potentially contain zillions of lines of data.

You do mention that you only have 4 columns, but much more importantly, you don't mention how many rows we're talking about here.

If you pass 5000 lines to the browser from the database, knowing that the actual database-table contains 100,000 rows, my question is: what's the point in making the table sortable? In order to do a proper sort, you'd have to send the query back to the database, and let the database (a tool actually designed to sort data) do the sorting for you.

In direct answer to your question though, the best sorting add-on I've come across is Ingrid. There are many reasons that I don't like this add-on ("unnecessary bells and whistles..." as you call it), but one of it's best features in terms of sort, is that it uses ajax, and doesn't assume that you've already passed it all the data before it does its sort.

I recognise that this answer is probably overkill (and over 2 years late) for your requirements, but I do get annoyed when developers in my field overlook this point. So I hope someone else picks up on it.

I feel better now.

JObject.ContainsKey(string propertyName) has been made as public method in 11.0.1 release

Documentation - https://www.newtonsoft.com/json/help/html/M_Newtonsoft_Json_Linq_JObject_ContainsKey.htm

You can use mkdir:

$ man 2 mkdir

#include <sys/stat.h>
#include <sys/types.h>

int result = mkdir("/home/me/test.txt", 0777);

On Apache on Linux there might be a problem that the configuration cannot be checked because of a problem with environment variables not being set. This is a false positive which only occurs when running apache2 -S from commandline (See previous answer from @simhumileco). For instance Config variable ${APACHE_RUN_DIR} is not defined.

In order to fix this run source /etc/apache2/envvars from the commandline and then run `apache2 -S' to get to the real (possible) problems.

root@fileserver:~# apache2 -S
[Thu Apr 30 10:42:06.822719 2020] [core:warn] [pid 24624] AH00111: Config variable ${APACHE_RUN_DIR} is not defined
apache2: Syntax error on line 80 of /etc/apache2/apache2.conf: DefaultRuntimeDir must be a valid directory, absolute or relative to ServerRoot
root@fileserver:~# source /etc/apache2/envvars
root@fileserver:/root# apache2 -S
AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message
VirtualHost configuration:
<----snip---->
ServerRoot: "/etc/apache2"
Main DocumentRoot: "/var/www/html"
Main ErrorLog: "/var/log/apache2/error.log"
Mutex ldap-cache: using_defaults
Mutex default: dir="/var/run/apache2/" mechanism=default
Mutex mpm-accept: using_defaults
Mutex watchdog-callback: using_defaults
PidFile: "/var/run/apache2/apache2.pid"
Define: DUMP_VHOSTS
Define: DUMP_RUN_CFG
User: name="www-data" id=33
Group: name="www-data" id=33
root@fileserver:/root#

PhpEd is really good. You can step into/over/out of functions. You can run ad-hoc code, inspect variables, change variables. It is amazing.

If you're open to out-of-the-DB solution: You could set up a cron job that runs a script that will itself call the procedure.

Anything that matches something ending with a --- .*a$ So when you match the regex, negate the condition or alternatively you can also do .*[^a]$ where [^a] means anything which is not a

Another alternative would be to specify the list of libraries twice:

gcc prog.o libA.a libB.a libA.a libB.a -o prog.x

Doing this, you don't have to bother with the right sequence since the reference will be resolved in the second block.

FYI, from November 2018 anyone who wants access Twitter’s APIs must apply for a Twitter Development Account by visiting https://developer.twitter.com/. Once your application has been approved then only you'll be able to create Twitter apps.

Once the Twitter Developer Account is ready:

1) Go to https://developer.twitter.com/.

2) Click on Apps and then click on Create an app.

3) Provide an App Name & Description.

4) Enter a website name in the Website URL field.

5) Click on Create.

6) Navigate to your app, then click on Details and then go to Keys and Tokens.

Reference: http://www.technocratsid.com/getting-twitter-consumer-api-access-token-keys/

We finally found an answer of sorts. First, the problem: the table always sizes itself around the content, rather than forcing the content to fit in the table. That limits your options.

We did it by setting the content div to display:none, letting the table size itself, and then in javascript setting the height and width of the content div to the inner height and width of the enclosing td tag. Show the content div. Repeat the process when the window is resized.

Here's a rundown on static_cast<> and dynamic_cast<> specifically as they pertain to pointers. This is just a 101-level rundown, it does not cover all the intricacies.

static_cast< Type* >(ptr)

This takes the pointer in ptr and tries to safely cast it to a pointer of type Type*. This cast is done at compile time. It will only perform the cast if the types are related. If the types are not related, you will get a compiler error. For example:

class B {};
class D : public B {};
class X {};

int main()
{
  D* d = new D;
  B* b = static_cast<B*>(d); // this works
  X* x = static_cast<X*>(d); // ERROR - Won't compile
  return 0;
}

dynamic_cast< Type* >(ptr)

This again tries to take the pointer in ptr and safely cast it to a pointer of type Type*. But this cast is executed at runtime, not compile time. Because this is a run-time cast, it is useful especially when combined with polymorphic classes. In fact, in certian cases the classes must be polymorphic in order for the cast to be legal.

Casts can go in one of two directions: from base to derived (B2D) or from derived to base (D2B). It's simple enough to see how D2B casts would work at runtime. Either ptr was derived from Type or it wasn't. In the case of D2B dynamic_cast<>s, the rules are simple. You can try to cast anything to anything else, and if ptr was in fact derived from Type, you'll get a Type* pointer back from dynamic_cast. Otherwise, you'll get a NULL pointer.

But B2D casts are a little more complicated. Consider the following code:

#include <iostream>
using namespace std;

class Base
{
public:
    virtual void DoIt() = 0;    // pure virtual
    virtual ~Base() {};
};

class Foo : public Base
{
public:
    virtual void DoIt() { cout << "Foo"; }; 
    void FooIt() { cout << "Fooing It..."; }
};

class Bar : public Base
{
public :
    virtual void DoIt() { cout << "Bar"; }
    void BarIt() { cout << "baring It..."; }
};

Base* CreateRandom()
{
    if( (rand()%2) == 0 )
        return new Foo;
    else
        return new Bar;
}


int main()
{
    for( int n = 0; n < 10; ++n )
    {
        Base* base = CreateRandom();

            base->DoIt();

        Bar* bar = (Bar*)base;
        bar->BarIt();
    }
  return 0;
}

main() can't tell what kind of object CreateRandom() will return, so the C-style cast Bar* bar = (Bar*)base; is decidedly not type-safe. How could you fix this? One way would be to add a function like bool AreYouABar() const = 0; to the base class and return true from Bar and false from Foo. But there is another way: use dynamic_cast<>:

int main()
{
    for( int n = 0; n < 10; ++n )
    {
        Base* base = CreateRandom();

        base->DoIt();

        Bar* bar = dynamic_cast<Bar*>(base);
        Foo* foo = dynamic_cast<Foo*>(base);
        if( bar )
            bar->BarIt();
        if( foo )
            foo->FooIt();
    }
  return 0;

}

The casts execute at runtime, and work by querying the object (no need to worry about how for now), asking it if it the type we're looking for. If it is, dynamic_cast<Type*> returns a pointer; otherwise it returns NULL.

In order for this base-to-derived casting to work using dynamic_cast<>, Base, Foo and Bar must be what the Standard calls polymorphic types. In order to be a polymorphic type, your class must have at least one virtual function. If your classes are not polymorphic types, the base-to-derived use of dynamic_cast will not compile. Example:

class Base {};
class Der : public Base {};


int main()
{
    Base* base = new Der;
    Der* der = dynamic_cast<Der*>(base); // ERROR - Won't compile

    return 0;
}

Adding a virtual function to base, such as a virtual dtor, will make both Base and Der polymorphic types:

class Base 
{
public:
    virtual ~Base(){};
};
class Der : public Base {};


int main()
{
    Base* base = new Der;
    Der* der = dynamic_cast<Der*>(base); // OK

    return 0;
}

"pull-right" class may not be the right way because in uses "float: right" instead of text-align.

Checking the bootstrap 3 css file i found "text-right" class on line 457. This class should be the right way to align the text to the right.

Some code:

<div class="row">
    <div class="col-xs-12">
        <div class="text-right">
            <button type="button" class="btn btn-default">Default</button>
        </div>
    </div>
</div>

The ArrayList uses the equals method implemented in the class (your case Thing class) to do the equals comparison.

Yes, the Session object might be null, but only in certain circumstances, which you will only rarely run into:

• If you have disabled the SessionState http module, disabling sessions altogether
• If your code runs before the HttpApplication.AcquireRequestState event.
• Your code runs in an IHttpHandler, that does not specify either the IRequiresSessionState or IReadOnlySessionState interface.

If you only have code in pages, you won't run into this. Most of my ASP .NET code uses Session without checking for null repeatedly. It is, however, something to think about if you are developing an IHttpModule or otherwise is down in the grittier details of ASP .NET.

Edit

In answer to the comment: Whether or not session state is available depends on whether the AcquireRequestState event has run for the request. This is where the session state module does it's work by reading the session cookie and finding the appropiate set of session variables for you.

AcquireRequestState runs before control is handed to your Page. So if you are calling other functionality, including static classes, from your page, you should be fine.

If you have some classes doing initialization logic during startup, for example on the Application_Start event or by using a static constructor, Session state might not be available. It all boils down to whether there is a current request and AcquireRequestState has been run.

Also, should the client have disabled cookies, the Session object will still be available - but on the next request, the user will return with a new empty Session. This is because the client is given a Session statebag if he does not have one already. If the client does not transport the session cookie, we have no way of identifying the client as the same, so he will be handed a new session again and again.

you can use substring() method. ex,

var x = "Hello world"
var x = x.substring(0, i) + 'h' + x.substring(i+1);

Here is a simple approach to sneak by that stupid blocker screen in Visual Studio after 30-days expires using Process Hacker:

Details at: https://stackoverflow.com/a/34243422/3135511

It's more of a quick 'n dirty fix than a real solution. However, it may be quicker than doing all that official login/sign up, subscribe, whatever crap Microsoft wants you to do, in order to use Visual Studio Community Version for free.

I have solved this issue by below steps:

1. Right click the Maven Project -> Build Path -> Configure Build Path
2. In Order and Export tab, you can see the message like '2 build path entries are missing'
3. Now select 'JRE System Library' and 'Maven Dependencies' checkbox
4. Click OK

Now you can see below in all type of Explorers (Package or Project or Navigator)

src/main/java

src/main/resources

src/test/java

I see that there is already some great advice and methods suggest for how to get the post back control. However I found another web page (Mahesh blog) with a method to retrieve post back control ID.

I will post it here with a little modification, including making it an extension class. Hopefully it is more useful in that way.

/// <summary>
/// Gets the ID of the post back control.
/// 
/// See: http://geekswithblogs.net/mahesh/archive/2006/06/27/83264.aspx
/// </summary>
/// <param name = "page">The page.</param>
/// <returns></returns>
public static string GetPostBackControlId(this Page page)
{
    if (!page.IsPostBack)
        return string.Empty;

    Control control = null;
    // first we will check the "__EVENTTARGET" because if post back made by the controls
    // which used "_doPostBack" function also available in Request.Form collection.
    string controlName = page.Request.Params["__EVENTTARGET"];
    if (!String.IsNullOrEmpty(controlName))
    {
        control = page.FindControl(controlName);
    }
    else
    {
        // if __EVENTTARGET is null, the control is a button type and we need to
        // iterate over the form collection to find it

        // ReSharper disable TooWideLocalVariableScope
        string controlId;
        Control foundControl;
        // ReSharper restore TooWideLocalVariableScope

        foreach (string ctl in page.Request.Form)
        {
            // handle ImageButton they having an additional "quasi-property" 
            // in their Id which identifies mouse x and y coordinates
            if (ctl.EndsWith(".x") || ctl.EndsWith(".y"))
            {
                controlId = ctl.Substring(0, ctl.Length - 2);
                foundControl = page.FindControl(controlId);
            }
            else
            {
                foundControl = page.FindControl(ctl);
            }

            if (!(foundControl is IButtonControl)) continue;

            control = foundControl;
            break;
        }
    }

    return control == null ? String.Empty : control.ID;
}

Update (2016-07-22): Type check for Button and ImageButton changed to look for IButtonControl to allow postbacks from third party controls to be recognized.

the settings below solved my issue

  "editor.detectIndentation": false,
  "editor.insertSpaces": false,
  "editor.tabSize": 2,

You can use :nth-last-child(); in fact, besides :nth-last-of-type() I don't know what else you could use. I'm not sure what you mean by "dynamic", but if you mean whether the style applies to the new second last child when more children are added to the list, yes it will. Interactive fiddle.

ul li:nth-last-child(2)

I think you can open the setup.py, locate the package name, and then ask pip to uninstall it.

Assuming the name is available in a 'METADATA' variable:

pip uninstall $(python -c "from setup import METADATA; print METADATA['name']")

HTML--

<div class="col-sm-12" id="my_styles">
   <button type="submit" class="btn btn-warning" id="1">Button1</button>
   <button type="submit" class="btn btn-warning" id="2">Button2</button>
</div>

css--

.active{
         background:red;
    }
 button.btn:active{
     background:red;
 }

jQuery--

jQuery("#my_styles .btn").click(function(){
    jQuery("#my_styles .btn").removeClass('active');
    jQuery(this).toggleClass('active'); 

});

view the live demo on jsfiddle

In form-data,

   key              value

 user_ids[]         1234
 user_ids[]         5678

So you are essentially asking how to store doublequotes within a string variable? Two solutions for that:

var string1 = @"""inside quotes""";
var string2 = "\"inside quotes\"";

In order to perhaps make it a bit more clear what happens:

var string1 = @"before ""inside"" after";
var string2 = "before \"inside\" after";

A simplest fix would be:

x = input("Give starting number: ")
y = input("Give ending number: ")

x = int(x)  # parse string into an integer
y = int(y)  # parse string into an integer

for i in range(x,y):
    print(i)

input returns you a string (raw_input in Python 2). int tries to parse it into an integer. This code will throw an exception if the string doesn't contain a valid integer string, so you'd probably want to refine it a bit using try/except statements.

I used following:

if str and not str.isspace():
  print('not null and not empty nor whitespace')
else:
  print('null or empty or whitespace')

There is no i in xpath is not entirely true. You can still use the count() to find the index.

Consider the following page

<html>_x000D_
_x000D_
 <head>_x000D_
  <title>HTML Sample table</title>_x000D_
 </head>_x000D_
_x000D_
 <style>_x000D_
 table, td, th {_x000D_
  border: 1px solid black;_x000D_
  font-size: 15px;_x000D_
  font-family: Trebuchet MS, sans-serif;_x000D_
 }_x000D_
 table {_x000D_
  border-collapse: collapse;_x000D_
  width: 100%;_x000D_
 }_x000D_
_x000D_
 th, td {_x000D_
  text-align: left;_x000D_
  padding: 8px;_x000D_
 }_x000D_
_x000D_
 tr:nth-child(even){background-color: #f2f2f2}_x000D_
_x000D_
 th {_x000D_
  background-color: #4CAF50;_x000D_
  color: white;_x000D_
 }_x000D_
 </style>_x000D_
_x000D_
 <body>_x000D_
 <table>_x000D_
  <thead>_x000D_
   <tr>_x000D_
    <th>Heading 1</th>_x000D_
    <th>Heading 2</th>_x000D_
    <th>Heading 3</th>_x000D_
    <th>Heading 4</th>_x000D_
    <th>Heading 5</th>_x000D_
    <th>Heading 6</th>_x000D_
   </tr>_x000D_
  </thead>_x000D_
  <tbody>_x000D_
   <tr>_x000D_
    <td>Data row 1 col 1</td>_x000D_
    <td>Data row 1 col 2</td>_x000D_
    <td>Data row 1 col 3</td>_x000D_
    <td>Data row 1 col 4</td>_x000D_
    <td>Data row 1 col 5</td>_x000D_
    <td>Data row 1 col 6</td>_x000D_
   </tr>_x000D_
   <tr>_x000D_
    <td>Data row 2 col 1</td>_x000D_
    <td>Data row 2 col 2</td>_x000D_
    <td>Data row 2 col 3</td>_x000D_
    <td>Data row 2 col 4</td>_x000D_
    <td>Data row 2 col 5</td>_x000D_
    <td>Data row 2 col 6</td>_x000D_
   </tr>_x000D_
   <tr>_x000D_
    <td>Data row 3 col 1</td>_x000D_
    <td>Data row 3 col 2</td>_x000D_
    <td>Data row 3 col 3</td>_x000D_
    <td>Data row 3 col 4</td>_x000D_
    <td>Data row 3 col 5</td>_x000D_
    <td>Data row 3 col 6</td>_x000D_
   </tr>_x000D_
   <tr>_x000D_
    <td>Data row 4 col 1</td>_x000D_
    <td>Data row 4 col 2</td>_x000D_
    <td>Data row 4 col 3</td>_x000D_
    <td>Data row 4 col 4</td>_x000D_
    <td>Data row 4 col 5</td>_x000D_
    <td>Data row 4 col 6</td>_x000D_
   </tr>_x000D_
   <tr>_x000D_
    <td>Data row 5 col 1</td>_x000D_
    <td>Data row 5 col 2</td>_x000D_
    <td>Data row 5 col 3</td>_x000D_
    <td>Data row 5 col 4</td>_x000D_
    <td>Data row 5 col 5</td>_x000D_
    <td>Data row 5 col 6</td>_x000D_
   </tr>_x000D_
   <tr>_x000D_
    <td><button>Modify</button></td>_x000D_
    <td><button>Modify</button></td>_x000D_
    <td><button>Modify</button></td>_x000D_
    <td><button>Modify</button></td>_x000D_
    <td><button>Modify</button></td>_x000D_
    <td><button>Modify</button></td>_x000D_
   </tr>_x000D_
  </tbody>_x000D_
 </table>_x000D_
_x000D_
 </br>_x000D_
_x000D_
 <table>_x000D_
  <thead>_x000D_
   <tr>_x000D_
    <th>Heading 7</th>_x000D_
    <th>Heading 8</th>_x000D_
    <th>Heading 9</th>_x000D_
    <th>Heading 10</th>_x000D_
    <th>Heading 11</th>_x000D_
    <th>Heading 12</th>_x000D_
   </tr>_x000D_
  </thead>_x000D_
  <tbody>_x000D_
   <tr>_x000D_
    <td>Data row 1 col 1</td>_x000D_
    <td>Data row 1 col 2</td>_x000D_
    <td>Data row 1 col 3</td>_x000D_
    <td>Data row 1 col 4</td>_x000D_
    <td>Data row 1 col 5</td>_x000D_
    <td>Data row 1 col 6</td>_x000D_
   </tr>_x000D_
   <tr>_x000D_
    <td>Data row 2 col 1</td>_x000D_
    <td>Data row 2 col 2</td>_x000D_
    <td>Data row 2 col 3</td>_x000D_
    <td>Data row 2 col 4</td>_x000D_
    <td>Data row 2 col 5</td>_x000D_
    <td>Data row 2 col 6</td>_x000D_
   </tr>_x000D_
   <tr>_x000D_
    <td>Data row 3 col 1</td>_x000D_
    <td>Data row 3 col 2</td>_x000D_
    <td>Data row 3 col 3</td>_x000D_
    <td>Data row 3 col 4</td>_x000D_
    <td>Data row 3 col 5</td>_x000D_
    <td>Data row 3 col 6</td>_x000D_
   </tr>_x000D_
   <tr>_x000D_
    <td>Data row 4 col 1</td>_x000D_
    <td>Data row 4 col 2</td>_x000D_
    <td>Data row 4 col 3</td>_x000D_
    <td>Data row 4 col 4</td>_x000D_
    <td>Data row 4 col 5</td>_x000D_
    <td>Data row 4 col 6</td>_x000D_
   </tr>_x000D_
   <tr>_x000D_
    <td>Data row 5 col 1</td>_x000D_
    <td>Data row 5 col 2</td>_x000D_
    <td>Data row 5 col 3</td>_x000D_
    <td>Data row 5 col 4</td>_x000D_
    <td>Data row 5 col 5</td>_x000D_
    <td>Data row 5 col 6</td>_x000D_
   </tr>_x000D_
   <tr>_x000D_
    <td><button>Modify</button></td>_x000D_
    <td><button>Modify</button></td>_x000D_
    <td><button>Modify</button></td>_x000D_
    <td><button>Modify</button></td>_x000D_
    <td><button>Modify</button></td>_x000D_
    <td><button>Modify</button></td>_x000D_
   </tr>_x000D_
  </tbody>_x000D_
 </table>_x000D_
_x000D_
 </body>_x000D_
</html>

The page has 2 tables and has 6 columns each with unique column names and 6 rows with variable data. The last row has the Modify button in both the tables.

Assuming that the user has to select the 4th Modify button from the first table based on the heading

Use the xpath //th[.='Heading 4']/ancestor::thead/following-sibling::tbody/tr/td[count(//tr/th[.='Heading 4']/preceding-sibling::th)+1]/button

The count() operator comes in handy in situations like these.

Logic:

1. Find the header for the Modify button using //th[.='Heading 4']
2. Find the index of the header column using count(//tr/th[.='Heading 4']/preceding-sibling::th)+1

Note: Index starts at 0

3. Get the rows for the corresponding header using //th[.='Heading 4']/ancestor::thead/following-sibling::tbody/tr/td[count(//tr/th[.='Heading 4']/preceding-sibling::th)+1]

4. Get the Modify button from the extracted node list using //th[.='Heading 4']/ancestor::thead/following-sibling::tbody/tr/td[count(//tr/th[.='Heading 4']/preceding-sibling::th)+1]/button

I meet this question when i use intellij 15.0,then i update to 15.02 version. after that, I edit configurations and reset the Default JRE to my own JRE.It works well for me;

When your certificate expires, it simply disappears from the ‘Certificates, Identifier & Profiles’ section of Member Center. There is no ‘Renew’ button that allows you to renew your certificate. You can revoke a certificate and generate a new one before it expires. Or you can wait for it to expire and disappear, then generate a new certificate. In Apple's App Distribution Guide:

Replacing Expired Certificates

When your development or distribution certificate expires, remove it and request a new certificate in Xcode.

When your certificate expires or is revoked, any provisioning profile that made use of the expired/revoked certificate will be reflected as ‘Invalid’. You cannot build and sign any app using these invalid provisioning profiles. As you can imagine, I'd rather revoke and regenerate a certificate before it expires.

Q: If I do that then will all my live apps be taken down?

Apps that are already on the App Store continue to function fine. Again, in Apple's App Distribution Guide:

Important: Re-creating your development or distribution certificates doesn’t affect apps that you’ve submitted to the store nor does it affect your ability to update them.

So…

Q: How to I properly renew it?

As mentioned above, there is no renewing of certificates. Follow the steps below to revoke and regenerate a new certificate, along with the affected provisioning profiles. The instructions have been updated for Xcode 8.3 and Xcode 9.

Step 1: Revoke the expiring certificate

Login to Member Center > Certificates, Identifiers & Profiles, select the expiring certificate. Take note of the expiry date of the certificate, and click the ‘Revoke’ button.

Step 2: (Optional) Remove the revoked certificate from your Keychain

Optionally, if you don't want to have the revoked certificate lying around in your system, you can delete them from your system. Unfortunately, the ‘Delete Certificate’ function in Xcode > Preferences > Accounts > [Apple ID] > Manage Certificates… seems to be always disabled, so we have to delete them manually using Keychain Access.app (/Applications/Utilities/Keychain Access.app).

Filter by ‘login’ Keychains and ‘Certificates’ Category. Locate the certificate that you've just revoked in Step 1.

Depending on the certificate that you've just revoked, search for either ‘Mac’ or ‘iPhone’. Mac App Store distribution certificates begin with “3rd Party Mac Developer”, and iOS App Store distribution certificates begin with “iPhone Distribution”.

You can locate the revoked certificate based on the team name, the type of certificate (Mac or iOS) and the expiry date of the certificate you've noted down in Step 1.

Step 3: Request a new certificate using Xcode

Under Xcode > Preferences > Accounts > [Apple ID] > Manage Certificates…, click on the ‘+’ button on the lower left, and select the same type of certificate that you've just revoked to let Xcode request a new one for you.

Step 4: Update your provisioning profiles to use the new certificate

After which, head back to Member Center > Certificates, Identifiers & Profiles > Provisioning Profiles > All. You'll notice that any provisioning profile that made use of the revoked certificate is now reflected as ‘Invalid’.

Click on any profile that are now ‘Invalid’, click ‘Edit’, then choose the newly created certificate, then click on ‘Generate’. Repeat this until all provisioning profiles are regenerated with the new certificate.

Step 5: Use Xcode to download the new provisioning profiles

Tip: Before you download the new profiles using Xcode, you may want to clear any existing and possibly invalid provisioning profiles from your Mac. You can do so by removing all the profiles from ~/Library/MobileDevice/Provisioning Profiles

Back in Xcode > Preferences > Accounts > [Apple ID], click on the ‘Download All Profiles’ button to ask Xcode to download all the provisioning profiles from your developer account.

First of all, you should make an HTML form containing a file input element. You also need to set the form's enctype attribute to multipart/form-data:

<form method="post" enctype="multipart/form-data" action="/upload">
    <input type="file" name="file">
    <input type="submit" value="Submit">
</form>

Assuming the form is defined in index.html stored in a directory named public relative to where your script is located, you can serve it this way:

const http = require("http");
const path = require("path");
const fs = require("fs");

const express = require("express");

const app = express();
const httpServer = http.createServer(app);

const PORT = process.env.PORT || 3000;

httpServer.listen(PORT, () => {
  console.log(`Server is listening on port ${PORT}`);
});

// put the HTML file containing your form in a directory named "public" (relative to where this script is located)
app.get("/", express.static(path.join(__dirname, "./public")));

Once that's done, users will be able to upload files to your server via that form. But to reassemble the uploaded file in your application, you'll need to parse the request body (as multipart form data).

In Express 3.x you could use express.bodyParser middleware to handle multipart forms but as of Express 4.x, there's no body parser bundled with the framework. Luckily, you can choose from one of the many available multipart/form-data parsers out there. Here, I'll be using multer:

You need to define a route to handle form posts:

const multer = require("multer");

const handleError = (err, res) => {
  res
    .status(500)
    .contentType("text/plain")
    .end("Oops! Something went wrong!");
};

const upload = multer({
  dest: "/path/to/temporary/directory/to/store/uploaded/files"
  // you might also want to set some limits: https://github.com/expressjs/multer#limits
});


app.post(
  "/upload",
  upload.single("file" /* name attribute of <file> element in your form */),
  (req, res) => {
    const tempPath = req.file.path;
    const targetPath = path.join(__dirname, "./uploads/image.png");

    if (path.extname(req.file.originalname).toLowerCase() === ".png") {
      fs.rename(tempPath, targetPath, err => {
        if (err) return handleError(err, res);

        res
          .status(200)
          .contentType("text/plain")
          .end("File uploaded!");
      });
    } else {
      fs.unlink(tempPath, err => {
        if (err) return handleError(err, res);

        res
          .status(403)
          .contentType("text/plain")
          .end("Only .png files are allowed!");
      });
    }
  }
);

In the example above, .png files posted to /upload will be saved to uploaded directory relative to where the script is located.

In order to show the uploaded image, assuming you already have an HTML page containing an img element:

<img src="/image.png" />

you can define another route in your express app and use res.sendFile to serve the stored image:

app.get("/image.png", (req, res) => {
  res.sendFile(path.join(__dirname, "./uploads/image.png"));
});

Using INSERT INTO ... VALUES syntax like in Daniel Vassallo's answer there is one annoying limitation:

From MSDN

The maximum number of rows that can be constructed by inserting rows directly in the VALUES list is 1000

The easiest way to omit this limitation is to use derived table like:

INSERT INTO dbo.Mytable(ID, Name)
SELECT ID, Name 
FROM (
   VALUES (1, 'a'),
          (2, 'b'),
          --...
          -- more than 1000 rows
)sub (ID, Name);

LiveDemo

As Nora suggests, you can use the python simple server. Navigate to the folder from which you want to serve your html page, then execute python -m SimpleHTTPServer. Now you can use your web-browser and navigate to http://localhost:8000/ where your page is being served. If your page is named index.html then the server automatically loads that for you. If you want to access any other page, you'll need to browse to http://localhost:8000/{your page name}

For what should be completely obvious reasons, ordinary Apps are not allowed to create arbitrary windows on top of the lock screen. What do you think I could do if I created a window on your lockscreen that could perfectly imitate the real lockscreen so you couldn't tell the difference?

The technical reason for your error is the use of the TYPE_KEYGUARD_DIALOG flag - it requires android.permission.INTERNAL_SYSTEM_WINDOW which is a signature-level permission. This means that only Apps signed with the same certificate as the creator of the permission can use it.

The creator of android.permission.INTERNAL_SYSTEM_WINDOW is the Android system itself, so unless your App is part of the OS, you don't stand a chance.

There are well defined and well documented ways of notifying the user of information from the lockscreen. You can create customised notifications which show on the lockscreen and the user can interact with them.

A way via extension function on IEnumerable that returns both the object and the minimum found. It takes a Func that can do any operation on the object in the collection:

public static (double min, T obj) tMin<T>(this IEnumerable<T> ienum, 
            Func<T, double> aFunc)
        {
            var okNull = default(T);
            if (okNull != null)
                throw new ApplicationException("object passed to Min not nullable");

            (double aMin, T okObj) best = (double.MaxValue, okNull);
            foreach (T obj in ienum)
            {
                double q = aFunc(obj);
                if (q < best.aMin)
                    best = (q, obj);
            }
            return (best);
        }

Example where object is an Airport and we want to find closest Airport to a given (latitude, longitude). Airport has a dist(lat, lon) function.

(double okDist, Airport best) greatestPort = airPorts.tMin(x => x.dist(okLat, okLon));

You need to store the psftp script (lines from open to bye) into a separate file and pass that to psftp using -b switch:

cd "C:\Program Files (x86)\PuTTY"
psftp -b "C:\path\to\script\script.txt"

Reference:
https://the.earth.li/~sgtatham/putty/latest/htmldoc/Chapter6.html#psftp-option-b

EDIT: For username+password: As you cannot use psftp commands in a batch file, for the same reason, you cannot specify the username and the password as psftp commands. These are inputs to the open command. While you can specify the username with the open command (open <user>@<IP>), you cannot specify the password this way. This can be done on a psftp command line only. Then it's probably cleaner to do all on the command-line:

cd "C:\Program Files (x86)\PuTTY"
psftp -b script.txt <user>@<IP> -pw <PW>

And remove the open, <user> and <PW> lines from your script.txt.

Reference:
https://the.earth.li/~sgtatham/putty/latest/htmldoc/Chapter6.html#psftp-starting
https://the.earth.li/~sgtatham/putty/latest/htmldoc/Chapter3.html#using-cmdline-pw

What you are doing atm is that you run psftp without any parameter or commands. Once you exit it (like by typing bye), your batch file continues trying to run open command (and others), what Windows shell obviously does not understand.

If you really want to keep everything in one file (the batch file), you can write commands to psftp standard input, like:

(
    echo cd ...
    echo lcd ...
    echo put log.sh
) | psftp -b script.txt <user>@<IP> -pw <PW>

use the following class

    import java.io.BufferedOutputStream;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.FileOutputStream;
    import java.util.zip.ZipEntry;
    import java.util.zip.ZipInputStream;
    import android.util.Log;

    public class DecompressFast {



 private String _zipFile; 
  private String _location; 
 
  public DecompressFast(String zipFile, String location) { 
    _zipFile = zipFile; 
    _location = location; 
 
    _dirChecker(""); 
  } 
 
  public void unzip() { 
    try  { 
      FileInputStream fin = new FileInputStream(_zipFile); 
      ZipInputStream zin = new ZipInputStream(fin); 
      ZipEntry ze = null; 
      while ((ze = zin.getNextEntry()) != null) { 
        Log.v("Decompress", "Unzipping " + ze.getName()); 
 
        if(ze.isDirectory()) { 
          _dirChecker(ze.getName()); 
        } else { 
          FileOutputStream fout = new FileOutputStream(_location + ze.getName()); 
         BufferedOutputStream bufout = new BufferedOutputStream(fout);
          byte[] buffer = new byte[1024];
          int read = 0;
          while ((read = zin.read(buffer)) != -1) {
              bufout.write(buffer, 0, read);
          }

          
          
          
          bufout.close();
          
          zin.closeEntry(); 
          fout.close(); 
        } 
         
      } 
      zin.close(); 
      
      
      Log.d("Unzip", "Unzipping complete. path :  " +_location );
    } catch(Exception e) { 
      Log.e("Decompress", "unzip", e); 
      
      Log.d("Unzip", "Unzipping failed");
    } 
 
  } 
 
  private void _dirChecker(String dir) { 
    File f = new File(_location + dir); 
 
    if(!f.isDirectory()) { 
      f.mkdirs(); 
    } 
  } 


 }

How to use

 String zipFile = Environment.getExternalStorageDirectory() + "/the_raven.zip"; //your zip file location
    String unzipLocation = Environment.getExternalStorageDirectory() + "/unzippedtestNew/"; // destination folder location
  DecompressFast df= new DecompressFast(zipFile, unzipLocation);
    df.unzip();

Permissions

 <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" />
 <uses-permission android:name="android.permission.READ_EXTERNAL_STORAGE" />

Some color-syntaxing enrichment can be applied with the following blockcode syntax

```json
Here goes your json object definition
```

Note: This won't prettify the json representation. To do so, one can previously rely on an external service such as jsbeautifier.org and paste the prettified result in the wiki.

After some years have passed, you can do that now with ES6 Array.from (or spread syntax):

const navbar = Array.from(document.querySelectorAll('#navbar>ul>li'));_x000D_
console.log('Get first: ', navbar[0].textContent);_x000D_
_x000D_
// If you need to iterate once over all these nodes, you can use the callback function:_x000D_
console.log('Iterate with Array.from callback argument:');_x000D_
Array.from(document.querySelectorAll('#navbar>ul>li'),li => console.log(li.textContent))_x000D_
_x000D_
// ... or a for...of loop:_x000D_
console.log('Iterate with for...of:');_x000D_
for (const li of document.querySelectorAll('#navbar>ul>li')) {_x000D_
    console.log(li.textContent);_x000D_
}

.as-console-wrapper { max-height: 100% !important; top: 0; }

<div id="navbar">_x000D_
  <ul>_x000D_
    <li id="navbar-One">One</li>_x000D_
    <li id="navbar-Two">Two</li>_x000D_
    <li id="navbar-Three">Three</li>_x000D_
  </ul>_x000D_
</div>

Just add both these files after opening of body tag. Keep in mind 'Only after Body tag' any where after body tag. If you add below mentioned files inside body tag then your problems would still be unresolved.

So paste them after or before close of body tag... This works 100%. I've tested and got it working!

<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.2/jquery.min.js"></script>
 <!-- Include all compiled plugins (below), or include individual files as needed -->
<script src="js/bootstrap.min.js"></script>

I needed this instead of using padding because I used inline-block containers to display a series of individual events in a workflow timeline. The last event in the timeline needed no arrow after it.

Ended up with something like:

.transaction-tile:after {
  content: "\f105";
}

.transaction-tile:last-child:after {
  content: "\00a0";
}

Used fontawesome for the gt (chevron) character. For whatever reason "content: none;" was producing alignment issues on the last tile.

Just create a bundle,

Bundle simple_bundle=new Bundle();
simple_bundle.putString("item1","value1");
Intent i=new Intent(getApplicationContext(),this_is_the_next_class.class);
i.putExtras(simple_bundle);
startActivity(i);

IN the "this_is_the_next_class.class"

You can retrieve the items like this.

Intent receive_i=getIntent();
Bundle my_bundle_received=receive_i.getExtras();
my_bundle_received.get("item1");
Log.d("Value","--"+my_bundle_received.get("item1").toString);

The -S switch makes sudo read the password from STDIN. This means you can do

echo mypassword | sudo -S command

to pass the password to sudo

However, the suggestions by others that do not involve passing the password as part of a command such as checking if the user is root are probably much better ideas for security reasons

if you use WAMP you should also add the certificate line in php.ini for Apache (besides the default php.ini file):

[curl]
curl.cainfo = C:\your_location\cacert.pem

works for php5.3+

using javascript you can send the generated pdf to a new window using the following code.

var string = doc.output('datauristring');

var iframe = "<iframe width='100%' height='100%' src='" + string + "'></iframe>"

var x = window.open();
x.document.open();
x.document.write(iframe);
x.document.close();

I got the following example here

/*
7) Join Strings using separator >>>AB$#$CD$#$EF

 */

import org.apache.commons.lang.StringUtils;

public class StringUtilsTrial {
  public static void main(String[] args) {

    // Join all Strings in the Array into a Single String, separated by $#$
    System.out.println("7) Join Strings using separator >>>"
        + StringUtils.join(new String[] { "AB", "CD", "EF" }, "$#$"));
  }
}

#nav ul {
    display: inline-block;
    list-style-type: none;
}

It should work, I tested it in your site.

You can add parameter columns or use dict with key which is converted to column name:

np.random.seed(123)
e = np.random.normal(size=10)  
dataframe=pd.DataFrame(e, columns=['a']) 
print (dataframe)
          a
0 -1.085631
1  0.997345
2  0.282978
3 -1.506295
4 -0.578600
5  1.651437
6 -2.426679
7 -0.428913
8  1.265936
9 -0.866740

e_dataframe=pd.DataFrame({'a':e}) 
print (e_dataframe)
          a
0 -1.085631
1  0.997345
2  0.282978
3 -1.506295
4 -0.578600
5  1.651437
6 -2.426679
7 -0.428913
8  1.265936
9 -0.866740

Maybe... :

datestamp=yyyy-MM-dd/HH:mm:ss.SSS/zzz
layout=%d{${datestamp}} ms=%-4r [%t] %-5p %l %n%m %n%n

# infoFile 
log4j.appender.infoFile=org.apache.log4j.RollingFileAppender
log4j.appender.infoFile.File=${MY_HOME}/logs/message.log
log4j.appender.infoFile.layout=org.apache.log4j.PatternLayout
log4j.appender.infoFile.layout.ConversionPattern=${layout}

mysql> GRANT ALL ON *.* to root@'192.168.1.%' IDENTIFIED BY 'your-root-password';  

The wildcard character is a "%" instead of an "*"

I've played with statics a lot and may I give you a slightly different answer--or maybe a slightly different way to look at it?

When I've used statics in a class (Members and methods both) I eventually started to notice that my class is actually two classes sharing responsibility--there is the "Static" part which acts a lot like a singleton and there is the non-static part (a normal class). As far as I know you can always separate those two classes completely by just selecting all the statics for one class and non-statics for the other.

This used to happen a lot when I had a static collection inside a class holding instances of the class and some static methods to manage the collection. Once you think about it, it's obvious that your class is not doing "Just one thing", it's being a collection and the doing something completely different.

Now, let's refactor the problem a little: If you split your class up into one class where everything is static and another which is just a "Normal Class" and forget about the "Normal Class" then your question becomes purely Static class vs Singleton which is addressed in length here (and probably a dozen other questions).

You can accomplish this (if I understand what you are trying to do) using dynamic SQL.

The trick is that you need to create a string containing the SQL statement. That's because the tablename has to specified in the actual SQL text, when you execute the statement. The table references and column references can't be supplied as parameters, those have to appear in the SQL text.

So you can use something like this approach:

SET @stmt = 'INSERT INTO @tmpTbl1 SELECT ' + @KeyValue 
    + ' AS fld1 FROM tbl' + @KeyValue

EXEC (@stmt)

First, we create a SQL statement as a string. Given a @KeyValue of 'Foo', that would create a string containing:

'INSERT INTO @tmpTbl1 SELECT Foo AS fld1 FROM tblFoo'

At this point, it's just a string. But we can execute the contents of the string, as a dynamic SQL statement, using EXECUTE (or EXEC for short).

The old-school sp_executesql procedure is an alternative to EXEC, another way to execute dymamic SQL, which also allows you to pass parameters, rather than specifying all values as literals in the text of the statement.

FOLLOWUP

EBarr points out (correctly and importantly) that this approach is susceptible to SQL Injection.

Consider what would happen if @KeyValue contained the string:

'1 AS foo; DROP TABLE students; -- '

The string we would produce as a SQL statement would be:

'INSERT INTO @tmpTbl1 SELECT 1 AS foo; DROP TABLE students; -- AS fld1 ...'

When we EXECUTE that string as a SQL statement:

INSERT INTO @tmpTbl1 SELECT 1 AS foo;
DROP TABLE students;
-- AS fld1 FROM tbl1 AS foo; DROP ...

And it's not just a DROP TABLE that could be injected. Any SQL could be injected, and it might be much more subtle and even more nefarious. (The first attacks can be attempts to retreive information about tables and columns, followed by attempts to retrieve data (email addresses, account numbers, etc.)

One way to address this vulnerability is to validate the contents of @KeyValue, say it should contain only alphabetic and numeric characters (e.g. check for any characters not in those ranges using LIKE '%[^A-Za-z0-9]%'. If an illegal character is found, then reject the value, and exit without executing any SQL.

Posting a string:

curl -d "String to post" "http://www.example.com/target"

Posting the contents of a file:

curl -d @soap.xml "http://www.example.com/target"

First of all, I wouldn't use a multi-dimensional array. Only ever seen bad things come of it.

Set up your variable like this:

IEnumerable<IEnumerable<string>> data = new[] {
    new[]{"...", "...", "..."},
    ... etc ...
};

Then you'd simply go:

var firsts = data.Select(x => x.FirstOrDefault()).Where(x => x != null); 

The Where makes sure it prunes any nulls if you have an empty list as an item inside.

Alternatively you can implement it as:

string[][] = new[] {
    new[]{"...","...","..."},
    new[]{"...","...","..."},
    ... etc ...
};

This could be used similarly to a [x,y] array but it's used like this: [x][y]

int(limit) returns the value converted into an integer, and doesn't change it in place as you call the function (which is what you are expecting it to).

Do this instead:

limit = int(limit)

Or when definiting limit:

if 'limit' in user_data :
    limit = int(user_data['limit'])

Another solution using DataFrame.apply(), with slightly less typing and more scalable when you want to join more columns:

cols = ['foo', 'bar', 'new']
df['combined'] = df[cols].apply(lambda row: '_'.join(row.values.astype(str)), axis=1)

First off i would like to thank Avanka for helping me solve my focus problem. There is however a bug in the code he posted, namely in the line: if (e.OldValue == null)

The problem I had was that if you first click in your view and focus the control, e.oldValue is no longer null. Then when you set the variable to focus the control for the first time, this results in the lostfocus and gotfocus handlers not being set. My solution to this was as follows:

public static class ExtensionFocus
    {
    static ExtensionFocus()
        {
        BoundElements = new List<string>();
        }

    public static readonly DependencyProperty IsFocusedProperty =
        DependencyProperty.RegisterAttached("IsFocused", typeof(bool?),
        typeof(ExtensionFocus), new FrameworkPropertyMetadata(false, IsFocusedChanged));

    private static List<string> BoundElements;

    public static bool? GetIsFocused(DependencyObject element)
        {
        if (element == null)
            {
            throw new ArgumentNullException("ExtensionFocus GetIsFocused called with null element");
            }
        return (bool?)element.GetValue(IsFocusedProperty);
        }

    public static void SetIsFocused(DependencyObject element, bool? value)
        {
        if (element == null)
            {
            throw new ArgumentNullException("ExtensionFocus SetIsFocused called with null element");
            }
        element.SetValue(IsFocusedProperty, value);
        }

    private static void IsFocusedChanged(DependencyObject d, DependencyPropertyChangedEventArgs e)
        {
        var fe = (FrameworkElement)d;

        // OLD LINE:
        // if (e.OldValue == null)
        // TWO NEW LINES:
        if (BoundElements.Contains(fe.Name) == false)
            {
            BoundElements.Add(fe.Name);
            fe.LostFocus += OnLostFocus;
            fe.GotFocus += OnGotFocus;
            }           


        if (!fe.IsVisible)
            {
            fe.IsVisibleChanged += new DependencyPropertyChangedEventHandler(fe_IsVisibleChanged);
            }

        if ((bool)e.NewValue)
            {
            fe.Focus();             
            }
        }

    private static void fe_IsVisibleChanged(object sender, DependencyPropertyChangedEventArgs e)
        {
        var fe = (FrameworkElement)sender;

        if (fe.IsVisible && (bool)((FrameworkElement)sender).GetValue(IsFocusedProperty))
            {
            fe.IsVisibleChanged -= fe_IsVisibleChanged;
            fe.Focus();
            }
        }

    private static void OnLostFocus(object sender, RoutedEventArgs e)
        {
        if (sender != null && sender is Control s)
            {
            s.SetValue(IsFocusedProperty, false);
            }
        }

    private static void OnGotFocus(object sender, RoutedEventArgs e)
        {
        if (sender != null && sender is Control s)
            {
            s.SetValue(IsFocusedProperty, true);
            }
        }
    }

I had got the same CORS error while working on a Vue.js project. You can resolve this either by building a proxy server or another way would be to disable the security settings of your browser (eg, CHROME) for accessing cross origin apis (this is temporary solution & not the best way to solve the issue). Both these solutions had worked for me. The later solution does not require any mock server or a proxy server to be build. Both these solutions can be resolved at the front end.

You can disable the chrome security settings for accessing apis out of the origin by typing the below command on the terminal:

/Applications/Google\ Chrome.app/Contents/MacOS/Google\ Chrome --user-data-dir="/tmp/chrome_dev_session" --disable-web-security

After running the above command on your terminal, a new chrome window with security settings disabled will open up. Now, run your program (npm run serve / npm run dev) again and this time you will not get any CORS error and would be able to GET request using axios.

Hope this helps!

For hints, look closer at the class name name that throws an error and the line number, example: Compilation failure [ERROR] \applications\xxxxx.java:[44,30] error: cannot find symbol

One other cause is unsupported method of for java version say jdk7 vs 8. Check your %JAVA_HOME%

step 1 Copy this class in your package

step 2 put the following code in your class which extends SQLiteOpenHelper.

 //-----------------for show databasae table----------------------------------------

public ArrayList<Cursor> getData(String Query)
{
    //get writable database
    SQLiteDatabase sqlDB =this.getWritableDatabase();
    String[] columns = new String[] { "mesage" };
    //an array list of cursor to save two cursors one has results from the query
    //other cursor stores error message if any errors are triggered
    ArrayList<Cursor> alc = new ArrayList<Cursor>(2);
    MatrixCursor Cursor2= new MatrixCursor(columns);
    alc.add(null);
    alc.add (null);


    try{
        String maxQuery = Query ;
        //execute the query results will be save in Cursor c
        Cursor c = sqlDB.rawQuery(maxQuery, null);

        //add value to cursor2
        Cursor2.addRow(new Object[] { "Success" });

        alc.set(1,Cursor2);
        if (null != c && c.getCount() > 0)
        {
            alc.set(0,c);
            c.moveToFirst();
            return alc ;
        }
        return alc;
    }
    catch(SQLException sqlEx)
    {
        Log.d("printing exception", sqlEx.getMessage());
        //if any exceptions are triggered save the error message to cursor an return the arraylist
        Cursor2.addRow(new Object[] { ""+sqlEx.getMessage() });
        alc.set(1,Cursor2);
        return alc;
    }
    catch(Exception ex)
    {
        Log.d("printing exception",ex.getMessage());
        //if any exceptions are triggered save the error message to cursor an return the arraylist
        Cursor2.addRow(new Object[] { ""+ex.getMessage() });
        alc.set(1,Cursor2);
        return alc;
    }
}

step 3 register in manifest

<activity
        android:name=".database.AndroidDatabaseManager"
        android:screenOrientation="portrait"
        android:theme="@style/AppTheme.NoActionBar"/>

step 4

Intent i = new Intent(this, AndroidDatabaseManager.class);
startActivity(i);

Another option is to use GitHub personal access tokens:

• Go to https://github.com/settings/tokens/new
• Add repo scope
• In Jenkins, add a GitHub source
• Use Repository HTTPS URL
• Add the HTTPS URL of the git repo (not the SSH one, eg. https://github.com/my-username/my-project.git)
• Add credential
  • Kind: Username with Password
  • Username: the GitHub username
  • Password: the personal access token you created on GitHub
  • ID: something like github-token-for-my-username

I tested this on Jenkins ver. 2.222.1 and Jenkins GitHub plugin 1.29.5 with a private GitHub repo.

I came here from google so it might be relevant to others: for yarn you could use:

yarn --cwd /path/to/your/app run start 

You can follow the below step to modify the .war file name if you are using maven project.

Open pom.xml file of your maven project and go to the tag <build></build>,

1. In that give your desired name between this tag : <finalName></finalName>.

   ex. : <finalName>krutik</finalName>

   After deploying this .war you will be able to access url with:
   http://localhost:8080/krutik/

2. If you want to access the url with slash '/' then you will have to specify then name as below:

   e.x. : <finalName>krutik#maheta</finalName>

   After deploying this .war you will be able to access url with:
   http://localhost:8080/krutik/maheta

Suffered from exact issue. Problem was because of NameValueSectionHandler in .config file. You should use AppSettingsSection instead:

<configuration>

 <configSections>
    <section  name="DEV" type="System.Configuration.AppSettingsSection" />
    <section  name="TEST" type="System.Configuration.AppSettingsSection" />
 </configSections>

 <TEST>
    <add key="key" value="value1" />
 </TEST>

 <DEV>
    <add key="key" value="value2" />
 </DEV>

</configuration>

then in C# code:

AppSettingsSection section = (AppSettingsSection)ConfigurationManager.GetSection("TEST");

btw NameValueSectionHandler is not supported any more in 2.0.

There's no built in Stopwatch utility but as of JSR-310 (Java 8 Time) you can do this simply.

ZonedDateTime now = ZonedDateTime.now();
// Do stuff
long seconds = now.until(ZonedDateTime.now(), ChronoUnit.SECONDS);

I haven't benchmarked this properly but I would guess using Guava's Stopwatch is more effective.

You can convert string to int many different type methods in C#

First one is mostly use :

string test = "123";
int x = Convert.ToInt16(test);

if int value is higher you should use int32 type.

Second one:

int x = int.Parse(text);

if you want to error check, you can use TryParse method. In below I add nullable type;

int i=0;
Int32.TryParse(text, out i) ? i : (int?)null);

Enjoy your codes....

This might seem like overkill, but if in another case you were trying to load a canvas from js (like I am doing), you could use a setInterval function and an if statement to constantly check if the canvas has loaded.

//set up the interval
var thisInterval = setInterval(function{
  //this if statment checks if the id "thisCanvas" is linked to something
  if(document.getElementById("thisCanvas") != null){
    //do what you want


    //clearInterval() will remove the interval if you have given your interval a name.
    clearInterval(thisInterval)
  }
//the 500 means that you will loop through this every 500 milliseconds (1/2 a second)
},500)

(In this example the canvas I am trying to load has an id of "thisCanvas")

I think jdk has certain features which can be used along with particular framework. Well call it SDK as a whole.

Like Android or Blackberry both use java along with their framework.

What you have here is a non-local variable (https://en.wikipedia.org/wiki/Non-local_variable), i.e. you access a local variable in a method an anonymous class.

Local variables of the method are kept on the stack and lost as soon as the method ends, however even after the method ends, the local inner class object is still alive on the heap and will need to access this variable (here, when an action is performed).

I would suggest two workarounds : Either you make your own class that implements actionlistenner and takes as constructor argument, your variable and keeps it as an class attribute. Therefore you would only access this variable within the same object.

Or (and this is probably the best solution) just qualify a copy of the variable final to access it in the inner scope as the error suggests to make it a constant:

This would suit your case since you are not modifying the value of the variable.

It's the default formatting that Oracle provides. If you want leading zeros on output, you'll need to explicitly provide the format. Use:

SELECT TO_CHAR(0.56,'0.99') FROM DUAL;

or even:

SELECT TO_CHAR(.56,'0.99') FROM DUAL;

The same is true for trailing zeros:

SQL> SELECT TO_CHAR(.56,'0.990') val FROM DUAL;

VAL
------
 0.560

The general form of the TO_CHAR conversion function is:

TO_CHAR(number, format)

git rev-parse is an ancillary plumbing command primarily used for manipulation.

One common usage of git rev-parse is to print the SHA1 hashes given a revision specifier. In addition, it has various options to format this output such as --short for printing a shorter unique SHA1.

There are other use cases as well (in scripts and other tools built on top of git) that I've used for:

• --verify to verify that the specified object is a valid git object.
• --git-dir for displaying the abs/relative path of the the .git directory.
• Checking if you're currently within a repository using --is-inside-git-dir or within a work-tree using --is-inside-work-tree
• Checking if the repo is a bare using --is-bare-repository
• Printing SHA1 hashes of branches (--branches), tags (--tags) and the refs can also be filtered based on the remote (using --remote)
• --parse-opt to normalize arguments in a script (kind of similar to getopt) and print an output string that can be used with eval

Massage just implies that it is possible to convert the info from one form into another i.e. a transformation command. These are some quick examples I can think of:

• a branch or tag name into the commit's SHA1 it is pointing to so that it can be passed to a plumbing command which only accepts SHA1 values for the commit.
• a revision range A..B for git log or git diff into the equivalent arguments for the underlying plumbing command as B ^A

To exclude the first line (header) from sorting, I split it out into two buffers.

df | awk 'BEGIN{header=""; $body=""} { if(NR==1){header=$0}else{body=body"\n"$0}} END{print header; print body|"sort -nk3"}'

file__IO = input('\nEnter file name here to analize with path:: ')
with open(file__IO, 'r') as f:
    data = f.read()
    line = data.splitlines()
    words = data.split()
    spaces = data.split(" ")
    charc = (len(data) - len(spaces))

    print('\n Line number ::', len(line), '\n Words number ::', len(words), '\n Spaces ::', len(spaces), '\n Charecters ::', (len(data)-len(spaces)))

I tried this code & it works as expected.

To add a little to Robert Knight's answer, since the title of the post itself doesn't mention foreign keys (and since his doesn't have complete code samples and since SO's comment code blocks don't show as well as the answers' code blocks), I'll add this for unique constraints. Either of these work to drop the constraint:

ALTER TABLE `table_name` DROP KEY `uc_name`;

or

ALTER TABLE `table_name` DROP INDEX `uc_name`;

Method 1

The problem with your code is that you are selecting the .remode_hover that is a descendant of .remode_selected. So the first part of getting your code to work correctly is by removing that space

.reMode_selected.reMode_hover:hover

Then, in order to get the style to not work, you have to override the style set by the :hover. In other words, you need to counter the background-color property. So the final code will be

.reMode_selected.reMode_hover:hover {
  background-color:inherit;
}
.reMode_hover:hover {
  background-color: #f0ac00;
}

Fiddle

Method 2

An alternative method would be to use :not(), as stated by others. This will return any element that doesn't have the class or property stated inside the parenthesis. In this case, you would put .remode_selected in there. This will target all elements that don't have a class of .remode_selected

Fiddle

However, I would not recommend this method, because of the fact that it was introduced in CSS3, so browser support is not ideal.

Method 3

A third method would be to use jQuery. You can target the .not() selector, which would be similar to using :not() in CSS, but with much better browser support

Fiddle

Since awk and perl are closely related...

Perl equivalents of @Dennis's awk solutions:

To print the second line:
perl -ne 'print if $. == 2' file

To print the second field:
perl -lane 'print $F[1]' file

To print the third field of the fifth line:
perl -lane 'print $F[2] if $. == 5' file

Perl equivalent of @Glenn's solution:

Print the j'th field of the i'th line

perl -lanse 'print $F[$j-1] if $. == $i' -- -i=5 -j=3 file

Perl equivalents of @Hai's solutions:

if you are looking for second columns that contains abc:

perl -lane 'print if $F[1] =~ /abc/' foo

... and if you want to print only a particular column:

perl -lane 'print $F[2] if $F[1] =~ /abc/' foo

... and for a particular line number:

perl -lane 'print $F[2] if $F[1] =~ /abc/ && $. == 5' foo

-l removes newlines, and adds them back in when printing
-a autosplits the input line into array @F, using whitespace as the delimiter
-n loop over each line of the input file
-e execute the code within quotes
$F[1] is the second element of the array, since Perl starts at 0
$. is the line number

The functions have different purposes. vector::insert allows you to insert an object at a specified position in the vector, whereas vector::push_back will just stick the object on the end. See the following example:

using namespace std;
vector<int> v = {1, 3, 4};
v.insert(next(begin(v)), 2);
v.push_back(5);
// v now contains {1, 2, 3, 4, 5}

You can use insert to perform the same job as push_back with v.insert(v.end(), value).

As @Nathan ended up with which is a simple HTTP Header, and some had said OAuth2 and client side SSL certificates. The gist of it is this... your REST API shouldn't have to handle security as that should really be outside the scope of the API.

Instead a security layer should be put on top of it, whether it is an HTTP Header behind a web proxy (a common approach like SiteMinder, Zermatt or even Apache HTTPd), or as complicated as OAuth 2.

The key thing is the requests should work without any end-user interaction. All that is needed is to ensure that the connection to the REST API is authenticated. In Java EE we have the notion of a userPrincipal that can be obtained on an HttpServletRequest. It is also managed in the deployment descriptor that a URL pattern can be secure so the REST API code does not need to check anymore.

In the WCF world, I would use ServiceSecurityContext.Current to get the current security context. You need to configure you application to require authentication.

There is one exception to the statement I had above and that's the use of a nonce to prevent replays (which can be attacks or someone just submitting the same data twice). That part can only be handled in the application layer.

My solution for sprintf

if ($value =~ m/\d\..*5$/){
    $format =~ /.*(\d)f$/;
    if (defined $1){
       my $coef = "0." . "0" x $1 . "05";    
            $value = $value + $coef;    
    }
}

$value = sprintf( "$format", $value );

IrishChieftain didn't really address the question, so here's my take:

eval() is supposed to be used for data that is not known at run time. Whether that be user input (dangerous) or other sources.

  function randomPassword(length) {
        var chars = "abcdefghijklmnopqrstuvwxyz#$%ABCDEFGHIJKLMNOP1234567890";
        var pass = "";
        for (var x = 0; x < length; x++) {
            var i = Math.floor(Math.random() * chars.length);
            pass += chars.charAt(i);
        }
        var pattern = false;
        var passwordpattern = new RegExp("[^a-zA-Z0-9+]+[0-9+]+[A-Z+]+[a-z+]");
        pattern = passwordpattern.test(pass);
        if (pattern == true)
            { alert(pass); }
        else
         { randomPassword(length); }
    }

try this to create the random password with atleast one special character

You can use SQLAlchemy's or_ function to search in more than one column (the underscore is necessary to distinguish it from Python's own or).

Here's an example:

from sqlalchemy import or_
query = meta.Session.query(User).filter(or_(User.firstname.like(searchVar),
                                            User.lastname.like(searchVar)))

Use the credential that you use to login to PC. Username can be searched by Clicking in sequence

Advanced -> Find -> Choose your Username -> (e.g. JOHNSMITH_HP/John)

Password must be same as your windows login password

There you go !!

SCSS

.table-vcenter {
    td,
    th {
        vertical-align: middle;
    }
}

use

<table class="table table-vcenter">
</table>

This would have worked too. The first quoted pair are interpreted as a window title name in the start command.

start "" "myfile.txt"
start "" "myshortcut.lnk"

Your class doesn't have a __init__(), so by the time it's instantiated, the attribute atoms is not present. You'd have to do C.setdata('something') so C.atoms becomes available.

>>> C = Residues()
>>> C.atoms.append('thing')

Traceback (most recent call last):
  File "<pyshell#84>", line 1, in <module>
    B.atoms.append('thing')
AttributeError: Residues instance has no attribute 'atoms'

>>> C.setdata('something')
>>> C.atoms.append('thing')   # now it works
>>> 

Unlike in languages like Java, where you know at compile time what attributes/member variables an object will have, in Python you can dynamically add attributes at runtime. This also implies instances of the same class can have different attributes.

To ensure you'll always have (unless you mess with it down the line, then it's your own fault) an atoms list you could add a constructor:

def __init__(self):
    self.atoms = []

This is a late answer, but I believe it is still useful.
I have created the NinjaNye.SearchExtension nuget package that can help solve this very problem.:

string[] terms = new[]{"search", "term", "collection"};
var result = context.Table.Search(terms, x => x.Name);

You could also search multiple string properties

var result = context.Table.Search(terms, x => x.Name, p.Description);

Or perform a RankedSearch which returns IQueryable<IRanked<T>> which simply includes a property which shows how many times the search terms appeared:

//Perform search and rank results by the most hits
var result = context.Table.RankedSearch(terms, x => x.Name, x.Description)
                     .OrderByDescending(r = r.Hits);

There is a more extensive guide on the projects GitHub page: https://github.com/ninjanye/SearchExtensions

Hope this helps future visitors

The previous answer is correct but in this specific case I would recommend using the System.IO.Path.Combine method.

You can find more details here: http://msdn.microsoft.com/en-us/library/fyy7a5kt.aspx

If you want to use Android's default drawable, you can use @android:drawable/ic_menu_search like this:

<EditText android:id="@+id/inputSearch"
    android:layout_width="fill_parent"
    android:layout_height="wrap_content"
    android:drawableLeft="@android:drawable/ic_menu_search"
    android:hint="Search product.."
    android:inputType="textVisiblePassword"/>

readdir() does that.

Check http://perldoc.perl.org/functions/readdir.html

opendir(DIR, $some_dir) || die "can't opendir $some_dir: $!";
@dots = grep { /^\./ && -f "$some_dir/$_" } readdir(DIR);
closedir DIR;

I had the same issue with google sign in.

I had correctly entered my callbacks in google Credential panel at google developer console here was my redirect urls :

https://www.example.com/signin-google

https://www.example.com/signin-google/

https://www.example.com/oauth2callback

https://www.example.com/oauth2callback/

Everything seems fine right? But it still didn't work until I added one more magical Url I added signin-google URL (which is default google callback) without www and problem solved.

Take it into account (depending on your domain) you may or may not need to add both with and without www URLs

dataGridView1.Rows.Clear();
dataGridView1.Refresh();

This can happen for a few reasons:

1. You forgot to include Jquery library in the document
2. You included the Jquery library more than once in the document
3. You forgot to include bootstrap.js library in the document
4. The versions of your Javascript and Bootstrap does not match. Refer bootstrap documentation to make sure the versions are matching
5. The modal <div> is missing the modal class
6. The id of the modal <div> is incorrect. (eg: you wrongly prepended # in the id of the <div>)
7. # sign is missing in the Jquery selector

I have another way to do this if you're using Nuget to manage your dependencies. I've discovered that sometimes VS and Nuget don't match up and Nuget is unable to recognize that your projects are out of sync. The packages.config will say one thing but the path shown in References - Properties will indicate something else.

If you're willing to update your dependencies, do the following:

1. From Solution Explorer, right click the Project and click 'Manage Nuget Packages'

2. Select 'Installed packages' tab in left pane Record your installed packages You may want to copy your packages.config to your desktop first if you have a lot, so you can cross check it with Google to see what Nuget pkgs are installed

3. Uninstall your packages. Its OK, we're going to add them right back.

4. Immediately install the packages you need. What Nuget will do is not only get you the latest version, but will alter your references, and also add the binding redirects for you.

5. Do this for all of your projects.

6. At the solution level, do a Clean and Rebuild.

You may want to start with the lower projects and work your way to the higher level ones, and rebuild each project as you go along.

If you don't want to update your dependencies, then you can use the package manager console, and use the syntax Update-Package -ProjectName [yourProjectName] [packageName] -Version [versionNumber]

HTTP sends bytes. If the resource in question is text, the character encoding is normally specified, either by the Content-Type HTTP header or by another mechanism (an RFC, HTML meta http-equiv,...).

urllib should know how to encode the bytes to a string, but it's too naïve—it's a horribly underpowered and un-Pythonic library.

Dive Into Python 3 provides an overview about the situation.

Your "work-around" is fine—although it feels wrong, it's the correct way to do it.

Spring MockMvc now has direct support for JSON. So you just say:

.andExpect(content().json("{'message':'ok'}"));

and unlike string comparison, it will say something like "missing field xyz" or "message Expected 'ok' got 'nok'.

This method was introduced in Spring 4.1.

Use re.sub

import re

regex = re.compile('[^a-zA-Z]')
#First parameter is the replacement, second parameter is your input string
regex.sub('', 'ab3d*E')
#Out: 'abdE'

Alternatively, if you only want to remove a certain set of characters (as an apostrophe might be okay in your input...)

regex = re.compile('[,\.!?]') #etc.

You can have an auto-Incrementing column that is not the PRIMARY KEY, as long as there is an index (key) on it:

CREATE TABLE members ( 
  id int(11)  UNSIGNED NOT NULL AUTO_INCREMENT,
  memberid VARCHAR( 30 ) NOT NULL , 
  `time` TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP , 
  firstname VARCHAR( 50 ) NULL , 
  lastname VARCHAR( 50 ) NULL , 
  PRIMARY KEY (memberid) ,
  KEY (id)                          --- or:    UNIQUE KEY (id)
) ENGINE = MYISAM; 

Answer is to escape the dash!

http://www.mail-archive.com/[email protected]/msg83991.html

EF doesn't support unique columns except keys. If you are using EF Migrations you can force EF to create unique index on UserName column (in migration code, not by any annotation) but the uniqueness will be enforced only in the database. If you try to save duplicate value you will have to catch exception (constraint violation) fired by the database.

I had the same problem and my problem had nothing to do with paths. One of my dll-s was written in c++ and it turnes out that if your visual studio doesn't know how to open a dll file it will say that it did not find it. What i did was locate which dll it did not find, than searched for that dll in my directories and opened it in a separate visual studio window. When trying to navigate through Solution explorer of that project, visual studio said that it cannot show what is inside and that i need some extra extensions, so that it can open those files. Surely enough, after installing the recomended extension (in my case something to do with c++) the

"This application has failed to start because xxx.dll was not found."

error miraculously dissapeared.

Since this issue is kind of old a lot of things have changed.

You can now get this behavior by adding this to the footer div

data-position="fixed"

More info here: http://jquerymobile.com/test/docs/toolbars/bars-fixed.html

Also beware, if you use the previously mentioned CSS together with the new JQM solution you will NOT get the appropriate behavior!

As @bulk said, it uses namespaces.

I recommend you to start using an IDE, it will suggest you to import all the required namespaces (\App\Post in this case).

This thread is rather old but I have determined an option that could prove useful.

Instead of using the Java AudioStream library you could use an external program like Windows Media Player or VLC and run it with a console command through Java.

String command = "\"C:/Program Files (x86)/Windows Media Player/wmplayer.exe\" \"C:/song.mp3\"";
try {
    Process p = Runtime.getRuntime().exec(command);
catch (IOException e) {
    e.printStackTrace();
}

This will also create a separate process that can be controlled it the program.

p.destroy();

Of course this will take longer to execute than using an internal library but there may be programs that can start up faster and possibly without a GUI given certain console commands.

If time is not of the essence then this is useful.

left = None

left is None #evaluates to True

You don't really need the directive, can achieve it by using the ng-init and ng-checked. below demo link shows how to set the initial value for checkbox in angularjs.

demo link:

<form>
    <div>
      Released<input type="checkbox" ng-model="Released" ng-bind-html="ACR.Released" ng-true-value="true" ng-false-value="false" ng-init='Released=true' ng-checked='true' /> 
      Inactivated<input type="checkbox" ng-model="Inactivated" ng-bind-html="Inactivated" ng-true-value="true" ng-false-value="false" ng-init='Inactivated=false' ng-checked='false' /> 
      Title Changed<input type="checkbox" ng-model="Title" ng-bind-html="Title" ng-true-value="true" ng-false-value="false" ng-init='Title=false' ng-checked='false' />
    </div>
    <br/>
    <div>Released value is  <b>{{Released}}</b></div>
    <br/>
    <div>Inactivated  value is  <b>{{Inactivated}}</b></div>
    <br/>
    <div>Title  value is  <b>{{Title}}</b></div>
    <br/>
  </form>

// Code goes here

  var app = angular.module("myApp", []);
        app.controller("myCtrl", function ($scope) {

         });    

This just in:

n = 8
s = '123'
print  s[:n-3] + (s[n-3:], '...')[len(s) > n]
s = '12345678'
print  s[:n-3] + (s[n-3:], '...')[len(s) > n]
s = '123456789'     
print  s[:n-3] + (s[n-3:], '...')[len(s) > n]
s = '123456789012345'
print  s[:n-3] + (s[n-3:], '...')[len(s) > n]

123
12345678
12345...
12345...

See link here. You find your solution. And try:

Creating a Custom Toast View

If a simple text message isn't enough, you can create a customized layout for your toast notification. To create a custom layout, define a View layout, in XML or in your application code, and pass the root View object to the setView (View) method.

For example, you can create the layout for the toast visible in the screenshot to the right with the following XML (saved as toast_layout.xml):

<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
            android:id="@+id/toast_layout_root"
            android:orientation="horizontal"
            android:layout_width="fill_parent"
            android:layout_height="fill_parent"
            android:padding="10dp"
            android:background="#DAAA"
>

    <ImageView android:id="@+id/image"
               android:layout_width="wrap_content"
               android:layout_height="fill_parent"
               android:layout_marginRight="10dp"
    />

    <TextView android:id="@+id/text"
              android:layout_width="wrap_content"
              android:layout_height="fill_parent"
              android:textColor="#FFF"
    />
</LinearLayout>

Notice that the ID of the LinearLayout element is "toast_layout". You must use this ID to inflate the layout from the XML, as shown here:

 LayoutInflater inflater = getLayoutInflater();
 View layout = inflater.inflate(R.layout.toast_layout,
                                (ViewGroup) findViewById(R.id.toast_layout_root));

 ImageView image = (ImageView) layout.findViewById(R.id.image);
 image.setImageResource(R.drawable.android);
 TextView text = (TextView) layout.findViewById(R.id.text);
 text.setText("Hello! This is a custom toast!");

 Toast toast = new Toast(getApplicationContext());
 toast.setGravity(Gravity.CENTER_VERTICAL, 0, 0);
 toast.setDuration(Toast.LENGTH_LONG);
 toast.setView(layout);
 toast.show();

First, retrieve the LayoutInflater with getLayoutInflater() (or getSystemService()), and then inflate the layout from XML using inflate(int, ViewGroup). The first parameter is the layout resource ID and the second is the root View. You can use this inflated layout to find more View objects in the layout, so now capture and define the content for the ImageView and TextView elements. Finally, create a new Toast with Toast(Context) and set some properties of the toast, such as the gravity and duration. Then call setView(View) and pass it the inflated layout. You can now display the toast with your custom layout by calling show().

Note: Do not use the public constructor for a Toast unless you are going to define the layout with setView(View). If you do not have a custom layout to use, you must use makeText(Context, int, int) to create the Toast.

The Fusion Log Settings Viewer changer script is bar none the best way to do this.

In ASP.NET, it has been tricky at times to get this to work correctly. This script works great and was listed on Scott Hanselman's Power Tool list as well. I've personally used it for years and its never let me down.

string[] TobeDistinct = {"Name","City","State"};
DataTable dtDistinct = GetDistinctRecords(DTwithDuplicate, TobeDistinct);

//Following function will return Distinct records for Name, City and State column.
public static DataTable GetDistinctRecords(DataTable dt, string[] Columns)
{
    DataTable dtUniqRecords = new DataTable();
    dtUniqRecords = dt.DefaultView.ToTable(true, Columns);
    return dtUniqRecords;
}

What browser are you using? I entered your example and tried in both IE8 and Chrome and it validated fine when I typed in the value Sam's

 public class IndexViewModel
 {
    [Required(ErrorMessage="Required")]
    [RegularExpression("^([a-zA-Z0-9 .&'-]+)$", ErrorMessage = "Invalid First Name")]
    public string Name { get; set; }
 }

When I inspect the DOM using IE Developer toolbar and Chrome Developer mode it does not show any special characters.

The answer depends on what do you need a loop for.

of course you can have a loop similar to Java:

for i in xrange(len(my_list)):

but I never actually used loops like this,

because usually you want to iterate

for obj in my_list

or if you need an index as well

for index, obj in enumerate(my_list)

or you want to produce another collection from a list

map(some_func, my_list)

[somefunc[x] for x in my_list]

also there are itertools module that covers most of iteration related cases

also please take a look at the builtins like any, max, min, all, enumerate

I would say - do not try to write Java-like code in python. There is always a pythonic way to do it.

The NoSuchMethodError javadoc says this:

Thrown if an application tries to call a specified method of a class (either static or instance), and that class no longer has a definition of that method.

Normally, this error is caught by the compiler; this error can only occur at run time if the definition of a class has incompatibly changed.

In your case, this Error is a strong indication that your webapp is using the wrong version of the JAR defining the org.objectweb.asm.* classes.

ls = [x if (condition) else None for x in ls]

The equivalent to WinForms' MessageBox in WPF is called System.Windows.MessageBox.

"Subscript out of range" indicates that you've tried to access an element from a collection that doesn't exist. Is there a "Sheet1" in your workbook? If not, you'll need to change that to the name of the worksheet you want to protect.

I found the actual solution...There is a problem in invoking your service from the client.. check the following things.

1. Make sure all [datacontract], [datamember] attribute are placed properly i.e. make sure WCF is error free

2. The WCF client, either web.config or any window app config, make sure config entries are properly pointing to the right ones.. binding info, url of the service..etc..etc

Then above problem : tempuri issue is resolved.. it has nothing to do with namespace.. though you are sure you lived with default,

Hope it saves your number of hours!

you can just use

ls > filenames.txt

(usually, start a shell by using "Terminal", or "shell", or "Bash".) You may need to use cd to go to that folder first, or you can ls ~/docs > filenames.txt

Use this. It will work. I have used bootstrap 3.3.5 and jquery 1.11.3

$('document').ready(function() {_x000D_
  $('#btnTest').click(function() {_x000D_
    $('#dummyModal').modal('show');_x000D_
  });_x000D_
});

body {_x000D_
  background-color: #eee;_x000D_
  padding-top: 40px;_x000D_
  padding-bottom: 40px;_x000D_
}

<!DOCTYPE html>_x000D_
<html>_x000D_
_x000D_
<head>_x000D_
  <meta charset="utf8">_x000D_
  <meta http-equiv="X-UA-Compatible" content="IE=edge">_x000D_
  <meta name="viewport" content="width=device-width,initial-scale=1">_x000D_
  <link rel="stylesheet" type="text/css" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.5/css/bootstrap.min.css">_x000D_
  <title>Modal Test</title>_x000D_
</head>_x000D_
_x000D_
<body>_x000D_
  <div class="container">_x000D_
    <button id="btnTest" class="btn btn-default">Show Modal</button>_x000D_
    <div id="dummyModal" role="dialog" class="modal fade">_x000D_
      <div class="modal-dialog">_x000D_
        <div class="modal-content">_x000D_
          <div class="modal-header">_x000D_
            <button type="button" data-dismiss="modal" class="close">&times;</button>_x000D_
            <h4 class="modal-title">Error</h4>_x000D_
          </div>_x000D_
          <div class="modal-body">_x000D_
            <p>Quick Brown Fox Jumps Over The Lazy Dog</p>_x000D_
          </div>_x000D_
          <div class="modal-footer">_x000D_
            <button type="button" data-dismiss="modal" class="btn btn-default">Close</button>_x000D_
          </div>_x000D_
        </div>_x000D_
      </div>_x000D_
    </div>_x000D_
  </div>_x000D_
  <script type="text/javascript" src="https://code.jquery.com/jquery-1.11.3.min.js"></script>_x000D_
  <script type="text/javascript" src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.5/js/bootstrap.min.js"></script>_x000D_
</body>_x000D_
_x000D_
</html>

I've been using the accepted answer by Mark Brittingham and its has helped me a lot. Recently I had to send encrypted text to a different organization and that's where some issues came up. The OP does not require these options but since this is a popular question I'm posting my modification (Encrypt and Decrypt functions borrowed from here):

1. Different IV for every message - Concatenates IV bytes to the cipher bytes before obtaining the hex. Of course this is a convention that needs to be conveyed to the parties receiving the cipher text.
2. Allows two constructors - one for default RijndaelManaged values, and one where property values can be specified (based on mutual agreement between encrypting and decrypting parties)

Here is the class (test sample at the end):

/// <summary>
/// Based on https://msdn.microsoft.com/en-us/library/system.security.cryptography.rijndaelmanaged(v=vs.110).aspx
/// Uses UTF8 Encoding
///  http://security.stackexchange.com/a/90850
/// </summary>
public class AnotherAES : IDisposable
{
    private RijndaelManaged rijn;

    /// <summary>
    /// Initialize algo with key, block size, key size, padding mode and cipher mode to be known.
    /// </summary>
    /// <param name="key">ASCII key to be used for encryption or decryption</param>
    /// <param name="blockSize">block size to use for AES algorithm. 128, 192 or 256 bits</param>
    /// <param name="keySize">key length to use for AES algorithm. 128, 192, or 256 bits</param>
    /// <param name="paddingMode"></param>
    /// <param name="cipherMode"></param>
    public AnotherAES(string key, int blockSize, int keySize, PaddingMode paddingMode, CipherMode cipherMode)
    {
        rijn = new RijndaelManaged();
        rijn.Key = Encoding.UTF8.GetBytes(key);
        rijn.BlockSize = blockSize;
        rijn.KeySize = keySize;
        rijn.Padding = paddingMode;
        rijn.Mode = cipherMode;
    }

    /// <summary>
    /// Initialize algo just with key
    /// Defaults for RijndaelManaged class: 
    /// Block Size: 256 bits (32 bytes)
    /// Key Size: 128 bits (16 bytes)
    /// Padding Mode: PKCS7
    /// Cipher Mode: CBC
    /// </summary>
    /// <param name="key"></param>
    public AnotherAES(string key)
    {
        rijn = new RijndaelManaged();
        byte[] keyArray = Encoding.UTF8.GetBytes(key);
        rijn.Key = keyArray;
    }

    /// <summary>
    /// Based on https://msdn.microsoft.com/en-us/library/system.security.cryptography.rijndaelmanaged(v=vs.110).aspx
    /// Encrypt a string using RijndaelManaged encryptor.
    /// </summary>
    /// <param name="plainText">string to be encrypted</param>
    /// <param name="IV">initialization vector to be used by crypto algorithm</param>
    /// <returns></returns>
    public byte[] Encrypt(string plainText, byte[] IV)
    {
        if (rijn == null)
            throw new ArgumentNullException("Provider not initialized");

        // Check arguments.
        if (plainText == null || plainText.Length <= 0)
            throw new ArgumentNullException("plainText cannot be null or empty");
        if (IV == null || IV.Length <= 0)
            throw new ArgumentNullException("IV cannot be null or empty");
        byte[] encrypted;

        // Create a decrytor to perform the stream transform.
        using (ICryptoTransform encryptor = rijn.CreateEncryptor(rijn.Key, IV))
        {
            // Create the streams used for encryption.
            using (MemoryStream msEncrypt = new MemoryStream())
            {
                using (CryptoStream csEncrypt = new CryptoStream(msEncrypt, encryptor, CryptoStreamMode.Write))
                {
                    using (StreamWriter swEncrypt = new StreamWriter(csEncrypt))
                    {
                        //Write all data to the stream.
                        swEncrypt.Write(plainText);
                    }
                    encrypted = msEncrypt.ToArray();
                }
            }
        }
        // Return the encrypted bytes from the memory stream.
        return encrypted;
    }//end EncryptStringToBytes

    /// <summary>
    /// Based on https://msdn.microsoft.com/en-us/library/system.security.cryptography.rijndaelmanaged(v=vs.110).aspx
    /// </summary>
    /// <param name="cipherText">bytes to be decrypted back to plaintext</param>
    /// <param name="IV">initialization vector used to encrypt the bytes</param>
    /// <returns></returns>
    public string Decrypt(byte[] cipherText, byte[] IV)
    {
        if (rijn == null)
            throw new ArgumentNullException("Provider not initialized");

        // Check arguments.
        if (cipherText == null || cipherText.Length <= 0)
            throw new ArgumentNullException("cipherText cannot be null or empty");
        if (IV == null || IV.Length <= 0)
            throw new ArgumentNullException("IV cannot be null or empty");

        // Declare the string used to hold the decrypted text.
        string plaintext = null;

        // Create a decrytor to perform the stream transform.
        using (ICryptoTransform decryptor = rijn.CreateDecryptor(rijn.Key, IV))
        {
            // Create the streams used for decryption.
            using (MemoryStream msDecrypt = new MemoryStream(cipherText))
            {
                using (CryptoStream csDecrypt = new CryptoStream(msDecrypt, decryptor, CryptoStreamMode.Read))
                {
                    using (StreamReader srDecrypt = new StreamReader(csDecrypt))
                    {
                        // Read the decrypted bytes from the decrypting stream and place them in a string.
                        plaintext = srDecrypt.ReadToEnd();
                    }
                }
            }
        }

        return plaintext;
    }//end DecryptStringFromBytes

    /// <summary>
    /// Generates a unique encryption vector using RijndaelManaged.GenerateIV() method
    /// </summary>
    /// <returns></returns>
    public byte[] GenerateEncryptionVector()
    {
        if (rijn == null)
            throw new ArgumentNullException("Provider not initialized");

        //Generate a Vector
        rijn.GenerateIV();
        return rijn.IV;
    }//end GenerateEncryptionVector


    /// <summary>
    /// Based on https://stackoverflow.com/a/1344255
    /// Generate a unique string given number of bytes required.
    /// This string can be used as IV. IV byte size should be equal to cipher-block byte size. 
    /// Allows seeing IV in plaintext so it can be passed along a url or some message.
    /// </summary>
    /// <param name="numBytes"></param>
    /// <returns></returns>
    public static string GetUniqueString(int numBytes)
    {
        char[] chars = new char[62];
        chars = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890".ToCharArray();
        byte[] data = new byte[1];
        using (RNGCryptoServiceProvider crypto = new RNGCryptoServiceProvider())
        {
            data = new byte[numBytes];
            crypto.GetBytes(data);
        }
        StringBuilder result = new StringBuilder(numBytes);
        foreach (byte b in data)
        {
            result.Append(chars[b % (chars.Length)]);
        }
        return result.ToString();
    }//end GetUniqueKey()

    /// <summary>
    /// Converts a string to byte array. Useful when converting back hex string which was originally formed from bytes.
    /// </summary>
    /// <param name="hex"></param>
    /// <returns></returns>
    public static byte[] StringToByteArray(String hex)
    {
        int NumberChars = hex.Length;
        byte[] bytes = new byte[NumberChars / 2];
        for (int i = 0; i < NumberChars; i += 2)
            bytes[i / 2] = Convert.ToByte(hex.Substring(i, 2), 16);
        return bytes;
    }//end StringToByteArray

    /// <summary>
    /// Dispose RijndaelManaged object initialized in the constructor
    /// </summary>
    public void Dispose()
    {
        if (rijn != null)
            rijn.Dispose();
    }//end Dispose()
}//end class

and..

Here is the test sample:

class Program
{
    string key;
    static void Main(string[] args)
    {
        Program p = new Program();

        //get 16 byte key (just demo - typically you will have a predetermined key)
        p.key = AnotherAES.GetUniqueString(16);

        string plainText = "Hello World!";

        //encrypt
        string hex = p.Encrypt(plainText);

        //decrypt
        string roundTrip = p.Decrypt(hex);

        Console.WriteLine("Round Trip: {0}", roundTrip);
    }

    string Encrypt(string plainText)
    {
        Console.WriteLine("\nSending (encrypt side)...");
        Console.WriteLine("Plain Text: {0}", plainText);
        Console.WriteLine("Key: {0}", key);
        string hex = string.Empty;
        string ivString = AnotherAES.GetUniqueString(16);
        Console.WriteLine("IV: {0}", ivString);
        using (AnotherAES aes = new AnotherAES(key))
        {
            //encrypting side
            byte[] IV = Encoding.UTF8.GetBytes(ivString);

            //get encrypted bytes (IV bytes prepended to cipher bytes)
            byte[] encryptedBytes = aes.Encrypt(plainText, IV);
            byte[] encryptedBytesWithIV = IV.Concat(encryptedBytes).ToArray();

            //get hex string to send with url
            //this hex has both IV and ciphertext
            hex = BitConverter.ToString(encryptedBytesWithIV).Replace("-", "");
            Console.WriteLine("sending hex: {0}", hex);
        }

        return hex;
    }

    string Decrypt(string hex)
    {
        Console.WriteLine("\nReceiving (decrypt side)...");
        Console.WriteLine("received hex: {0}", hex);
        string roundTrip = string.Empty;
        Console.WriteLine("Key " + key);
        using (AnotherAES aes = new AnotherAES(key))
        {
            //get bytes from url
            byte[] encryptedBytesWithIV = AnotherAES.StringToByteArray(hex);

            byte[] IV = encryptedBytesWithIV.Take(16).ToArray();

            Console.WriteLine("IV: {0}", System.Text.Encoding.Default.GetString(IV));

            byte[] cipher = encryptedBytesWithIV.Skip(16).ToArray();

            roundTrip = aes.Decrypt(cipher, IV);
        }
        return roundTrip;
    }
}

The answers here are correct for router-deprecated. For the latest version of router:

this.router.changes.forEach(() => {
    // Do whatever in here
});

or

this.router.changes.subscribe(() => {
     // Do whatever in here
});

To see the difference between the two, please check out this SO question.

Edit

For the latest you must do:

this.router.events.subscribe(event: Event => {
    // Handle route change
});

It's a sort of dummy table with a single record used for selecting when you're not actually interested in the data, but instead want the results of some system function in a select statement:

e.g. select sysdate from dual;

See http://www.adp-gmbh.ch/ora/misc/dual.html

The Zend Framework's Zend_Pdf is really good. It's on par with pdflib in terms of control of output and complexity and is more portable because its a pure php solution. That said, its slower and uses more memory than pdflib. Pecl modules are always more efficient than a php solution.

DOMPdf is the easiest way to make a pdf quickly. Like Mike said, feed it html and it outputs a pdf. Under the hood, it has the option to use either r&ospdf or pdflib as the rendering engine.

please remove " runat="server" " from "form" tag then it will definetly works.

Using

try:
with open("path", "r") as file:#or just open

may cause some troubles when file is opened by some other processes (i.e. user opened it manually). You can solve your poblem using win32com library. Below code checks if any excel files are opened and if none of them matches the name of your particular one, openes a new one.

import win32com.client as win32
xl = win32.gencache.EnsureDispatch('Excel.Application')

my_workbook = "wb_name.xls"
xlPath="my_wb_path//" + my_workbook


if xl.Workbooks.Count > 0:
    # if none of opened workbooks matches the name, openes my_workbook 
    if not any(i.Name == my_workbook for i in xl.Workbooks): 
        xl.Workbooks.Open(Filename=xlPath)
        xl.Visible = True
#no workbooks found, opening
else:  
    xl.Workbooks.Open(Filename=xlPath)
    xl.Visible = True

'xl.Visible = True is not necessary, used just for convenience'

Hope this will help

After all the Jquery script tag's add

<script>jQuery.noConflict();</script>

to avoid the conflict between Prototype and Jquery.

I think all other solutions are really helpful to do this, but there is yet another way.

I assume:

• you have installed the dplyr package, which has the convenient mutate command, and

• your dataset is named survey.

  survey %>% mutate(Hosp1 = Hospital1, Hosp2 = Hospital2,........)

This command helps you to rename columns, yet all other columns are kept.

Then do the same facet_wrap, you are fine now.

Many of the other answers will lead to errors/warnings. This approach is relatively fool proof although you may still need git branch -D branch_to_delete if it's not fully merged into some_other_branch, for example.

git checkout some_other_branch
git push origin :branch_to_delete
git branch -d branch_to_delete

Remote pruning isn't needed if you deleted the remote branch. It's only used to get the most up-to-date remotes available on a repository you're tracking. I've observed git fetch will add remotes, not remove them. Here's an example of when git remote prune origin will actually do something:

User A does the steps above. User B would run the following commands to see the most up-to-date remote branches:

git fetch
git remote prune origin
git branch -r

int val1 = [textBox1.text integerValue];
int val2 = [textBox2.text integerValue];

int resultValue = val1 * val2;

textBox3.text = [NSString stringWithFormat: @"%d", resultValue];

To follow debobroto das's answer you can also put after

input.reset();
input.next(); 

I had the same problem and when I tried this. It completely fixed it.

Under Settings => Media, there's an option for 'Full URL-path for files'. If you set this to the default media directory path '/wp-content/uploads' instead of blank, it will insert relative paths e.g. '/wp-content/uploads/2020/06/document.pdf'.

I'm not sure if it makes all links relative, e.g. to posts, but at least it handles media, which probably is what most people are worried about.

Another way to do this is to tell Mongoose that all you need is a plain JavaScript version of the returned doc by using lean() in the query chain. That way Mongoose skips the step of creating the full model instance and you directly get a doc you can modify:

MyModel.findOne().lean().exec(function(err, doc) {
    doc.addedProperty = 'foobar';
    res.json(doc);
});

fix_array = numpy.empty(n, dtype = object)

where n is the size of your array

though it works, it may not be the best idea as you have to import a library for this purpose. Hope this helps!

As of Node.js 14.3.0 the top-level await is supported.

Required flag: --experimental-top-level-await.

Further details: https://v8.dev/features/top-level-await

The easiest way is to add a type to the variable that is receiving the value, like this:

var value: string = (event.target as any).value;

Or you could cast the value property as well as event.target like this:

var value = ((event.target as any).value as string);

Edit:

Lastly, you can define what EventTarget.value is in a separate .d.ts file. However, the type will have to be compatible where it's used elsewhere, and you'll just end up using any again anyway.

globals.d.ts

interface EventTarget {
    value: any;
}

while :; do read; done

no waiting for child sleeping process.

You could use a regular expression validator on the upload control:

  <asp:RegularExpressionValidator id="FileUpLoadValidator" runat="server" ErrorMessage="Upload Excel files only." ValidationExpression="^(([a-zA-Z]:)|(\\{2}\w+)\$?)(\\(\w[\w].*))(.xls|.XLS|.xlsx|.XLSX)$" ControlToValidate="fileUpload"> </asp:RegularExpressionValidator>

There is also the accept attribute of the input tag:

<input type="file" accept="application/msexcel" id="fileUpload" runat="server">

but I did not have much success when I tried this (with FF3 and IE7)

The easiest way is to paste the following command:

cat /opt/gitlab/version-manifest.txt | head -n 1

and there you get the version installed. :)

For me worked this way:

private ListView yourListViewName;
private List<YourClassName> yourListName;

  ...

yourListName = new ArrayList<>();
yourAdapterName = new yourAdapterName(this, R.layout.your_layout_name, yourListName);

  ...

if (yourAdapterName.getCount() > 0) {
   yourAdapterName.clear();
   yourAdapterName.notifyDataSetChanged();
}

yourAdapterName.add(new YourClassName(yourParameter1, yourParameter2, ...));
yourListViewName.setAdapter(yourAdapterName);

For SwiftUI, try

TextField ("Email", text: $email)
    .textFieldStyle(RoundedBorderTextFieldStyle()).padding()
SecureField ("Password", text: $password)
    .textFieldStyle(RoundedBorderTextFieldStyle()).padding()

Here's an alternative solution: if you have the date in PHP as a timestamp, bypass handling it with PHP and let the DB take care of transforming it by using the FROM_UNIXTIME function.

mysql> insert into a_table values(FROM_UNIXTIME(1231634282));
Query OK, 1 row affected (0.00 sec)

mysql> select * from a_table;

+---------------------+
| a_date              |
+---------------------+
| 2009-01-10 18:38:02 |
+---------------------+

Type-safe means that programmatically, the type of data for a variable, return value, or argument must fit within a certain criteria.

In practice, this means that 7 (an integer type) is different from "7" (a quoted character of string type).

PHP, Javascript and other dynamic scripting languages are usually weakly-typed, in that they will convert a (string) "7" to an (integer) 7 if you try to add "7" + 3, although sometimes you have to do this explicitly (and Javascript uses the "+" character for concatenation).

C/C++/Java will not understand that, or will concatenate the result into "73" instead. Type-safety prevents these types of bugs in code by making the type requirement explicit.

Type-safety is very useful. The solution to the above "7" + 3 would be to type cast (int) "7" + 3 (equals 10).

Another short way:

int[] myIntArray = Arrays.stream(myStringArray).mapToInt(Integer::parseInt).toArray();

The usual method I have seen is X.Y.Z, which generally corresponds to major.minor.patch:

• Major version numbers change whenever there is some significant change being introduced. For example, a large or potentially backward-incompatible change to a software package.
• Minor version numbers change when a new, minor feature is introduced or when a set of smaller features is rolled out.
• Patch numbers change when a new build of the software is released to customers. This is normally for small bug-fixes or the like.

Other variations use build numbers as an additional identifier. So you may have a large number for X.Y.Z.build if you have many revisions that are tested between releases. I use a couple of packages that are identified by year/month or year/release. Thus, a release in the month of September of 2010 might be 2010.9 or 2010.3 for the 3rd release of this year.

There are many variants to versioning. It all boils down to personal preference.

For the "1.3v1.1", that may be two different internal products, something that would be a shared library / codebase that is rev'd differently from the main product; that may indicate version 1.3 for the main product, and version 1.1 of the internal library / package.

You could do it this way:

-- Notice how STATE got moved inside the condition:
CASE WHEN STATE = 2 AND RetailerProcessType IN (1, 2) THEN '"AUTHORISED"'
     WHEN STATE = 1 AND RetailerProcessType = 2 THEN '"PENDING"'
     ELSE '"DECLINED"'
END

The reason you can do an AND here is that you are not checking the CASE of STATE, but instead you are CASING Conditions.

The key part here is that the STATE condition is a part of the WHEN.

i understood it by this:

function fun1() {
    return this + 1;
}
function fun2(el) {
    return el + 1;
}

var item = [5,4,3,2,1];

var newitem1 = $.each(item, fun1);
var newitem2 = $.map(item, fun2);

console.log(newitem1); // [5, 4, 3, 2, 1] 
console.log(newitem2); // [6, 5, 4, 3, 2] 

so, "each" function returns the original array while "map" function returns a new array

I have a far more simple solution, it is working for me; it is also a workaround but might be usable and you dont have to change your settings. I assume you can use value that will never be there, then you use it on your WHERE clause

DELETE FROM MyTable WHERE MyField IS_NOT_EQUAL AnyValueNoItemOnMyFieldWillEverHave

I don't like that solution either too much, that's why I am here, but it works and it seems better than what it has been answered

remove_if() has already been mentioned. But, with C++0x, you can specify the predicate for it with a lambda instead.

Below is an example of that with 3 different ways of doing the filtering. "copy" versions of the functions are included too for cases when you're working with a const or don't want to modify the original.

#include <iostream>
#include <string>
#include <algorithm>
#include <cctype>
using namespace std;

string& remove_chars(string& s, const string& chars) {
    s.erase(remove_if(s.begin(), s.end(), [&chars](const char& c) {
        return chars.find(c) != string::npos;
    }), s.end());
    return s;
}
string remove_chars_copy(string s, const string& chars) {
    return remove_chars(s, chars);
}

string& remove_nondigit(string& s) {
    s.erase(remove_if(s.begin(), s.end(), [](const char& c) {
        return !isdigit(c);
    }), s.end());
    return s;
}
string remove_nondigit_copy(string s) {
    return remove_nondigit(s);
}

string& remove_chars_if_not(string& s, const string& allowed) {
    s.erase(remove_if(s.begin(), s.end(), [&allowed](const char& c) {
        return allowed.find(c) == string::npos;
    }), s.end());
    return s;
}
string remove_chars_if_not_copy(string s, const string& allowed) {
    return remove_chars_if_not(s, allowed);
}

int main() {
    const string test1("(555) 555-5555");
    string test2(test1);
    string test3(test1);
    string test4(test1);
    cout << remove_chars_copy(test1, "()- ") << endl;
    cout << remove_chars(test2, "()- ") << endl;
    cout << remove_nondigit_copy(test1) << endl;
    cout << remove_nondigit(test3) << endl;
    cout << remove_chars_if_not_copy(test1, "0123456789") << endl;
    cout << remove_chars_if_not(test4, "0123456789") << endl;
}

After investigating lots of alternatives, I have come across another approach, suitable for the API 2.0 version.

(VB.NET is my favorite, sooo...)

Public Async Function APIPut_Response(ID as Integer, MyWidget as Widget) as Task(Of HttpResponseMessage)
    Dim DesiredContent as HttpContent = New StringContent(JsonConvert.SerializeObject(MyWidget))
    Return Await APIClient.PutAsync(String.Format("api/widget/{0}", ID), DesiredContent)
End Function

Good luck! For me this worked out (in the end!).

Regards, Peter

Swift solution:

Define an Outlet:

@IBOutlet weak var pickerView: UIPickerView!  // for example

Then in your viewWillAppear or your viewDidLoad, for example, you can use the following:

pickerView.selectRow(rowMin, inComponent: 0, animated: true)
pickerView.selectRow(rowSec, inComponent: 1, animated: true)

If you inspect the Swift 2.0 framework you'll see .selectRow defined as:

func selectRow(row: Int, inComponent component: Int, animated: Bool) 

option clicking .selectRow in Xcode displays the following:

using System;

class Solution
{
    static string timeConversion(string s)
    {
        return DateTime.Parse(s).ToString("HH:mm");
    }

    static void Main(string[] args)
    {
        Console.WriteLine(timeConversion("01:00 PM"));
        Console.Read();
    }
}

It shows the problem it was the White spaces in App Name of .env file

I ran into a similar problem and just passed the end of the array to the ArrayList.add() index param like so:

public class Stack {

    private ArrayList<String> stringList = new ArrayList<String>();

    RandomStringGenerator rsg = new RandomStringGenerator();

    private void push(){
        String random = rsg.randomStringGenerator();
        stringList.add(stringList.size(), random);
    }

}

I am now using Google Apps (for Email) and Heroku as web server. I am using Google Apps 301 Permanent Redirect feature to redirect the naked domain to WWW.your_domain.com

You can find the step-by-step instructions here https://stackoverflow.com/a/20115583/1440255

As the given tag to this question is CSS, I will provide the way I accomplished it.

1. Create a class in the .css file.

   a.activePage{ color: green; border-bottom: solid; border-width: 3px;}

2. Nav-bar will be like:

   • Home
   • Contact Us
   • About Us

NOTE: If you are already setting the style for all Nav-Bar elements using a class, you can cascade the special-case class we created with a white-space after the generic class in the html-tag.

Example: Here, I was already importing my style from a class called 'navList' I created for all list-items . But the special-case styling-attributes are part of class 'activePage'

.CSS file:

a.navList{text-decoration: none; color: gray;}
a.activePage{ color: green; border-bottom: solid; border-width: 3px;}

.HTML file:

<div id="sub-header">
    <ul>
        <li> <a href="index.php" class= "navList activePage" >Home</a> </li>
        <li> <a href="contact.php" class= "navList">Contact Us</a> </li>
        <li> <a href="about.php" class= "navList">About Us</a> </li>
    </ul>
</div>

Look how I've cascaded one class-name behind other.