There is no :unchecked pseudo class however if you use the :checked pseudo class and the sibling selector you can differentiate between both states. I believe all of the latest browsers support the :checked pseudo class, you can find more info from this resource: http://www.whatstyle.net/articles/18/pretty_form_controls_with_css

Your going to get better browser support with jquery... you can use a click function to detect when the click happens and if its checked or not, then you can add a class or remove a class as necessary...

Use strptime to parse the time, and call time() on it to get the Unix timestamp.

Add ID attributes with same values as name attributes and then you can do this:

$('#first_name').change(function () {
  $('#firstname').val($(this).val());
});

@Entity(name = "someThing") => this name will be used to name the Entity
@Table(name = "someThing")  => this name will be used to name a table in DB

So, in the first case your table and entity will have the same name, that will allow you to access your table with the same name as the entity while writing HQL or JPQL.

And in second case while writing queries you have to use the name given in @Entity and the name given in @Table will be used to name the table in the DB.

So in HQL your someThing will refer to otherThing in the DB.

Also simple and easy:

Start-Sleep 10

function getCookie(name) {

    var dc = document.cookie;
    var prefix = name + "=";
    var begin = dc.indexOf("; " + prefix);
    if (begin == -1) {
        begin = dc.indexOf(prefix);
        if (begin != 0) return null;
        else{
            var oneCookie = dc.indexOf(';', begin);
            if(oneCookie == -1){
                var end = dc.length;
            }else{
                var end = oneCookie;
            }
            return dc.substring(begin, end).replace(prefix,'');
        } 

    }
    else
    {
        begin += 2;
        var end = document.cookie.indexOf(";", begin);
        if (end == -1) {
            end = dc.length;
        }
        var fixed = dc.substring(begin, end).replace(prefix,'');
    }
    // return decodeURI(dc.substring(begin + prefix.length, end));
    return fixed;
} 

Tried @jac function, got some trouble, here's how I edited his function.

A simple comparison against string works:

<c:when test="${someModel.status == 'OLD'}">

Somewhat of an old thread but, this seems to be a faster method using the latest version of matplotlib:

set the major formatter for the x-axis

ax.xaxis.set_major_formatter(plt.NullFormatter())

If I had to guess, you did this:

import datetime

at the top of your code. This means that you have to do this:

datetime.datetime.strptime(date, "%Y-%m-%d")

to access the strptime method. Or, you could change the import statement to this:

from datetime import datetime

and access it as you are.

The people who made the datetime module also named their class datetime:

#module  class    method
datetime.datetime.strptime(date, "%Y-%m-%d")

This can be done using LayoutParams to dynamically set the Views height once your know the Views width at runtime. You need to use a Runnable thread in order to get the Views width at runtime or else you'll be trying to set the Height before you know the View's width because the layout hasn't been drawn yet.

Example of how I solved my problem:

final FrameLayout mFrame = (FrameLayout) findViewById(R.id.frame_id);

    mFrame.post(new Runnable() {

        @Override
        public void run() {
            RelativeLayout.LayoutParams mParams;
            mParams = (RelativeLayout.LayoutParams) mFrame.getLayoutParams();
            mParams.height = mFrame.getWidth();
            mFrame.setLayoutParams(mParams);
            mFrame.postInvalidate();
        }
    });

The LayoutParams must be of the type of the Parent View that your view is in. My FrameLayout is inside of a RelativeLayout in the xml file.

    mFrame.postInvalidate();

is called to force the view to redraw while on a separate thread than the UI thread

A cleaner way to handle file open/close and avoid memory leaks:

Prep:

import numpy as np
import h5py

data_to_write = np.random.random(size=(100,20)) # or some such

Write:

with h5py.File('name-of-file.h5', 'w') as hf:
    hf.create_dataset("name-of-dataset",  data=data_to_write)

Read:

with h5py.File('name-of-file.h5', 'r') as hf:
    data = hf['name-of-dataset'][:]

You can remove the restriction by seting it to zero by adding this line at the top of your script:

<?php ini_set('max_execution_time', '0'); ?>

Without a bit of information about what files are in your repository (pure source code, images, executables, ...), it's a bit hard to answer the question :)

Beside this, I'll consider that you're willing to default to LF as line endings in your working directory because you're willing to make sure that text files have LF line endings in your .git repository wether you work on Windows or Linux. Indeed better safe than sorry....

However, there's a better alternative: Benefit from LF line endings in your Linux workdir, CRLF line endings in your Windows workdir AND LF line endings in your repository.

As you're partially working on Linux and Windows, make sure core.eol is set to native and core.autocrlf is set to true.

Then, replace the content of your .gitattributes file with the following

* text=auto

This will let Git handle the automagic line endings conversion for you, on commits and checkouts. Binary files won't be altered, files detected as being text files will see the line endings converted on the fly.

However, as you know the content of your repository, you may give Git a hand and help him detect text files from binary files.

Provided you work on a C based image processing project, replace the content of your .gitattributes file with the following

* text=auto
*.txt text
*.c text
*.h text
*.jpg binary

This will make sure files which extension is c, h, or txt will be stored with LF line endings in your repo and will have native line endings in the working directory. Jpeg files won't be touched. All of the others will be benefit from the same automagic filtering as seen above.

In order to get a get a deeper understanding of the inner details of all this, I'd suggest you to dive into this very good post "Mind the end of your line" from Tim Clem, a Githubber.

As a real world example, you can also peek at this commit where those changes to a .gitattributes file are demonstrated.

UPDATE to the answer considering the following comment

I actually don't want CRLF in my Windows directories, because my Linux environment is actually a VirtualBox sharing the Windows directory

Makes sense. Thanks for the clarification. In this specific context, the .gitattributes file by itself won't be enough.

Run the following commands against your repository

$ git config core.eol lf
$ git config core.autocrlf input

As your repository is shared between your Linux and Windows environment, this will update the local config file for both environment. core.eol will make sure text files bear LF line endings on checkouts. core.autocrlf will ensure potential CRLF in text files (resulting from a copy/paste operation for instance) will be converted to LF in your repository.

Optionally, you can help Git distinguish what is a text file by creating a .gitattributes file containing something similar to the following:

# Autodetect text files
* text=auto

# ...Unless the name matches the following
# overriding patterns

# Definitively text files 
*.txt text
*.c text
*.h text

# Ensure those won't be messed up with
*.jpg binary
*.data binary

If you decided to create a .gitattributes file, commit it.

Lastly, ensure git status mentions "nothing to commit (working directory clean)", then perform the following operation

$ git checkout-index --force --all

This will recreate your files in your working directory, taking into account your config changes and the .gitattributes file and replacing any potential overlooked CRLF in your text files.

Once this is done, every text file in your working directory WILL bear LF line endings and git status should still consider the workdir as clean.

You should be able to use \n inside a Swift string, and it should work as expected, creating a newline character. You will want to remove the space after the \n for proper formatting like so:

var example: String = "Hello World \nThis is a new line"

Which, if printed to the console, should become:

Hello World
This is a new line

However, there are some other considerations to make depending on how you will be using this string, such as:

• If you are setting it to a UILabel's text property, make sure that the UILabel's numberOfLines = 0, which allows for infinite lines.
• In some networking use cases, use \r\n instead, which is the Windows newline.

Edit: You said you're using a UITextField, but it does not support multiple lines. You must use a UITextView.

I think this is similar to kouton's answer, but this one just takes in a timeStamp and returns a timestamp SOMEWHERE in the next month. You could use date("m", $nextMonthDateN) from there.

function nextMonthTimeStamp($curDateN){ 
   $nextMonthDateN = $curDateN;
   while( date("m", $nextMonthDateN) == date("m", $curDateN) ){
      $nextMonthDateN += 60*60*24*27;
   }
   return $nextMonthDateN; //or return date("m", $nextMonthDateN);
}

In my case, I had to change to this: Solution 1(more better which depend on current py file path. Easy to deploy) Use pathlib.Path.parents make code cleaner

import sys
import os
import pathlib
target_path = pathlib.Path(os.path.abspath(__file__)).parents[3]
sys.path.append(target_path)
from utils import MultiFileAllowed

Solution 2

import sys
import os
sys.path.append(os.getcwd())
from utils import MultiFileAllowed

This may also tangentially help, to understand if a logging request (from the code) at a certain level will result in it actually being logged given the effective logging level that a deployment is configured with. Decide what effective level you want to configure you deployment with from the other Answers here, and then refer to this to see if a particular logging request from your code will actually be logged then...

For examples:

• "Will a logging code line that logs at WARN actually get logged on my deployment configured with ERROR?" The table says, NO.
• "Will a logging code line that logs at WARN actually get logged on my deployment configured with DEBUG?" The table says, YES.

from logback documentation:

In a more graphic way, here is how the selection rule works. In the following table, the vertical header shows the level of the logging request, designated by p, while the horizontal header shows effective level of the logger, designated by q. The intersection of the rows (level request) and columns (effective level) is the boolean resulting from the basic selection rule.

So a code line that requests logging will only actually get logged if the effective logging level of its deployment is less than or equal to that code line's requested level of severity.

Just dropping a note here to say that, although using document.write is highly frowned upon due to performance concerns (synchronous DOM injection and evaluation), there is also no actual 1:1 alternative if you are using document.write to inject script tags on demand.

There are a lot of great ways to avoid having to do this (e.g. script loaders like RequireJS that manage your dependency chains) but they are more invasive and so are best used throughout the site/application.

Try this way. This worked me.

1. wget nodejs.org/dist/v0.10.36/node-v0.10.36-linux-x64.tar.gz(download file)

2. Go to the directory where the Node.js binary was downloaded to, and then run command i.e, sudo tar -C /usr/local --strip-components 1 -xzf node-v0.10.36-linux-x64.tar.gz to install the Node.js binary package in “/usr/local/”.

3. You can check:-

   $ node -v
    v0.10.36 
   $ npm -v
    1.4.28
   

Not a direct answer to this question but rather to the "issue" of $event.currentTarget apparently be set to null.

This is due to the fact that console.log shows deep mutable objects at the last state of execution, not at the state when console.log was called.

You can check this for more information: Consecutive calls to console.log produce inconsistent results

Similar to the answer before there there is

location.host

The location global has more fun facts about the current url as well. ( protocol, host, port, pathname, search, hash )

I've tested in my own shell script.

• $new_username means newly created user
• $new_password means newly password

For CentOS

echo "$new_password" | passwd --stdin "$new_username"

For Debian/Ubuntu

echo "$new_username:$new_password" | chpasswd

For OpenSUSE

echo -e "$new_password\n$new_password" | passwd "$new_username"

use the hasClass jQuery method

If you mean by newline the newline character it is \n and \r is the carrier return character, but if you mean by newline the line ending then it depends on the operating system: DOS uses carriage return and line feed ("\r\n") as a line ending, which Unix uses just line feed ("\n")

Try with conditions.

$id = 1;
Post::with(array('user'=>function($query) use ($id){
    $query->where('id','=',$id);
    $query->select('id','username');
}))->get();

In Java 8, you can make of DateTimeFormatter, Duration, and LocalDateTime. Here is an example:

final String dateStart = "11/03/14 09:29:58";
final String dateStop = "11/03/14 09:33:43";

final DateTimeFormatter formatter = new DateTimeFormatterBuilder()
        .appendValue(ChronoField.MONTH_OF_YEAR, 2)
        .appendLiteral('/')
        .appendValue(ChronoField.DAY_OF_MONTH, 2)
        .appendLiteral('/')
        .appendValueReduced(ChronoField.YEAR, 2, 2, 2000)
        .appendLiteral(' ')
        .appendValue(ChronoField.HOUR_OF_DAY, 2)
        .appendLiteral(':')
        .appendValue(ChronoField.MINUTE_OF_HOUR, 2)
        .appendLiteral(':')
        .appendValue(ChronoField.SECOND_OF_MINUTE, 2)
        .toFormatter();

final LocalDateTime start = LocalDateTime.parse(dateStart, formatter);
final LocalDateTime stop = LocalDateTime.parse(dateStop, formatter);

final Duration between = Duration.between(start, stop);

System.out.println(start);
System.out.println(stop);
System.out.println(formatter.format(start));
System.out.println(formatter.format(stop));
System.out.println(between);
System.out.println(between.get(ChronoUnit.SECONDS));

Here is an example of what you are trying to do => fiddle

$(document).ready(function () {_x000D_
    $("#type").change(function () {_x000D_
        var val = $(this).val();_x000D_
        if (val == "item1") {_x000D_
            $("#size").html("<option value='test'>item1: test 1</option><option value='test2'>item1: test 2</option>");_x000D_
        } else if (val == "item2") {_x000D_
            $("#size").html("<option value='test'>item2: test 1</option><option value='test2'>item2: test 2</option>");_x000D_
        } else if (val == "item3") {_x000D_
            $("#size").html("<option value='test'>item3: test 1</option><option value='test2'>item3: test 2</option>");_x000D_
        } else if (val == "item0") {_x000D_
            $("#size").html("<option value=''>--select one--</option>");_x000D_
        }_x000D_
    });_x000D_
});

<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js"></script>_x000D_
<select id="type">_x000D_
    <option value="item0">--Select an Item--</option>_x000D_
    <option value="item1">item1</option>_x000D_
    <option value="item2">item2</option>_x000D_
    <option value="item3">item3</option>_x000D_
</select>_x000D_
_x000D_
<select id="size">_x000D_
    <option value="">-- select one -- </option>_x000D_
</select>

I had the same problem, and found the answer. If you use node.js with express, you need to give it its own function in order for the js file to be reached. For example:

const script = path.join(__dirname, 'script.js');
const server = express().get('/', (req, res) => res.sendFile(script))

Actually I think using plain slices is the best solution in this case:

for i in range(0, len(data), 100):
    chunk = data[i:i + 100]
    ...

If you want to avoid copying the slices, you could use itertools.islice(), but it doesn't seem to be necessary here.

The itertools() documentation also contains the famous "grouper" pattern:

def grouper(n, iterable, fillvalue=None):
    "grouper(3, 'ABCDEFG', 'x') --> ABC DEF Gxx"
    args = [iter(iterable)] * n
    return izip_longest(fillvalue=fillvalue, *args)

You would need to modify it to treat the last chunk correctly, so I think the straight-forward solution using plain slices is preferable.

I think you can create a simple SQL query:

$sql="select username from user where id in (select id from idtables)";
$query=$this->db->query($sql);

and then you can use it normally.

I found that the useful getResources().getColor(R.color.color_name) is deprecated.

It is not deprecated in API Level 21, according to the documentation.

It is deprecated in the M Developer Preview. However, the replacement method (a two-parameter getColor() that takes the color resource ID and a Resources.Theme object) is only available in the M Developer Preview.

Hence, right now, continue using the single-parameter getColor() method. Later this year, consider using the two-parameter getColor() method on Android M devices, falling back to the deprecated single-parameter getColor() method on older devices.

Solution from typescript interfaces reference:

interface ClockConstructor {
    new (hour: number, minute: number): ClockInterface;
}
interface ClockInterface {
    tick();
}

function createClock(ctor: ClockConstructor, hour: number, minute: number): ClockInterface {
    return new ctor(hour, minute);
}

class DigitalClock implements ClockInterface {
    constructor(h: number, m: number) { }
    tick() {
        console.log("beep beep");
    }
}
class AnalogClock implements ClockInterface {
    constructor(h: number, m: number) { }
    tick() {
        console.log("tick tock");
    }
}

let digital = createClock(DigitalClock, 12, 17);
let analog = createClock(AnalogClock, 7, 32);

So the previous example becomes:

interface AnimalConstructor {
    new (): Animal;
}

class Animal {
    constructor() {
        console.log("Animal");
    }
}

class Penguin extends Animal {
    constructor() {
        super();
        console.log("Penguin");
    }
}

class Lion extends Animal {
    constructor() {
        super();
        console.log("Lion");
    }
}

class Zoo {
    AnimalClass: AnimalConstructor // AnimalClass can be 'Lion' or 'Penguin'

    constructor(AnimalClass: AnimalConstructor) {
        this.AnimalClass = AnimalClass
        let Hector = new AnimalClass();
    }
}

Using a Windows 10 guest, after I performed steps 1 through 3 from @xinampc's answer, I had to open a new File Explorer and navigated to This PC > CD Drive (D:) VirtualBox Guest Additions to run VBoxWindowsAdditions. After I ran that and went through the command prompts, Windows rebooted and I was able to see VBOXSVR under Network.

This is an example that works on the AWS Cloud. The scenario is that some machine that booted from autoscaling needs to perform some action on another server, passing the newly spawned instance DNS via SSH

# Get the public DNS of the current machine (AWS specific)
MY_DNS=`curl -s http://169.254.169.254/latest/meta-data/public-hostname`


ssh \
    -o StrictHostKeyChecking=no \
    -i ~/.ssh/id_rsa \
    [email protected] \
<< EOF
cd ~/
echo "Hey I was just SSHed by ${MY_DNS}"
run_other_commands
# Newline is important before final EOF!

EOF

The following query will insert the results directly into HDFS:

INSERT OVERWRITE DIRECTORY '/path/to/output/dir' SELECT * FROM table WHERE id > 100;

What about one of these?

object.methods.sort
Class.methods.sort

In View:

<Button
 Height="50" Width="50"
 Style="{StaticResource MyButtonStyle}"
 Command="{Binding SmallDisp}" CommandParameter="{Binding}" 
Cursor="Hand" Visibility="{Binding Path=AdvancedFormat}"/>

In view Model:

public _advancedFormat = Visibility.visible (whatever you start with)

public Visibility AdvancedFormat
{
 get{return _advancedFormat;}
 set{
   _advancedFormat = value;
   //raise property changed here
}

You will need to have a property changed event

 protected virtual void OnPropertyChanged(PropertyChangedEventArgs e) 
    { 
        PropertyChanged.Raise(this, e); 
    } 

    protected void OnPropertyChanged(string propertyName) 
    { 
        OnPropertyChanged(new PropertyChangedEventArgs(propertyName)); 
    } 

This is how they use Model-view-viewmodel

But since you want it binded to a boolean, You will need some converter. Another way is to set a boolean outside and when that button is clicked then set the property_advancedFormat to your desired visibility.

You can't expect ObjectInputStream to automagically convert text into objects. The hexadecimal 54657374 is "Test" as text. You must be sending it directly as bytes.

1. Yes, unsigned integer can store large value.
2. No, there are different ways to show positive and negative values.
3. Yes, signed integer can contain both positive and negative values.

It sounds like your database dump includes the information for creating the database. So don't give the MySQL command line a database name. It will create the new database and switch to it to do the import.

You should put the button inside a div, and in the div you should be able to use the classes:
text-left, text-center and text-right.

for example:

<div class="row">
   <div class="col text-center">
      <button class="button button-small button-light">Search</button>
   </div>
</div>

And about the "textarea" position:

<div class="list">
<label class="item item-input">
    <span class="input-label">Date</span>
    <input type="text" placeholder="Text Area">
</label>

Demo using your code:
http://codepen.io/douglask/pen/zxXvYY

If you want to see the default browser errors being displayed, for example, those triggered by HTML attributes (showing up before any client-code JS treatment):

<input name="o" required="required" aria-required="true" type="text">

You should use the submit event instead of the click event. In this case a popup will be automatically displayed requesting "Please fill out this field". Even with preventDefault:

$('form').on('submit', function(event) {
   event.preventDefault();
   my_form_treatment(this, event);
}); // -> this will show up a "Please fill out this field" pop-up before my_form_treatment

As someone mentioned previously, return false would stop propagation (i.e. if there are more handlers attached to the form submission, they would not be executed), but, in this case, the action triggered by the browser will always execute first. Even with a return false at the end.

So if you want to get rid of these default pop-ups, use the click event on the submit button:

$('form input[type=submit]').on('click', function(event) {
   event.preventDefault();
   my_form_treatment(this, event);
}); // -> this will NOT show any popups related to HTML attributes

dataString suggests the data is formatted in a string (and maybe delimted by a character).

$data = explode(",", $_POST['data']);
foreach($data as $d){
     echo $d;
}

if dataString is not a string but infact an array (what your question indicates) use JSON.

I like this entry about angularjs structure

It's written by one of the angularjs developers, so should give you a good insight

Here's an excerpt:

root-app-folder
+-- index.html
+-- scripts
¦   +-- controllers
¦   ¦   +-- main.js
¦   ¦   +-- ...
¦   +-- directives
¦   ¦   +-- myDirective.js
¦   ¦   +-- ...
¦   +-- filters
¦   ¦   +-- myFilter.js
¦   ¦   +-- ...
¦   +-- services
¦   ¦   +-- myService.js
¦   ¦   +-- ...
¦   +-- vendor
¦   ¦   +-- angular.js
¦   ¦   +-- angular.min.js
¦   ¦   +-- es5-shim.min.js
¦   ¦   +-- json3.min.js
¦   +-- app.js
+-- styles
¦   +-- ...
+-- views
    +-- main.html
    +-- ...

I know notepad++ has a feature that lets you select blocks of text independent of line/column by holding control + alt + drag. So you can select just about any block of text you want.

You can execute it just as you select a table using SELECT clause. In addition you can provide parameters within parentheses.

Try with below syntax:

SELECT * FROM yourFunctionName(parameter1, parameter2)

If you are using foreach inside a function and you are expecting an array or a Traversable object you can type hint that function with:

function myFunction(array $a)
function myFunction(Traversable)

If you are not using foreach inside a function or you are expecting both you can simply use this construct to check if you can iterate over the variable:

if (is_array($a) or ($a instanceof Traversable))

With the multiplication, I recommend using the modulo operator (%) to determine which numbers divide evenly into the target number like:

$factors = array();
for($i = 0; $i < $target; $i++){
    if($target % $i == 0){
        $temp = array()
        $a = $i;
        $b = $target / $i;
        $temp["a"] = $a;
        $temp["b"] = $b;
        $temp["index"] = $i;
        array_push($factors, $temp);
    }
}

This would leave you with an array of factors of the target number.

Trident provides the ::-ms-check pseudo-element for checkbox and radio button controls. For example:

<input type="checkbox">
<input type="radio">

::-ms-check {
    color: red;
    background: black;
    padding: 1em;
}

This displays as follows in IE10 on Windows 8:

For the website ensure that IIS HTTP response headers setting and add new key X-UA-Compatible pointing to "IE=edge"

Click here for more details

If you have access to the server, the most reliable way of doing this is to do it on the server itself, in IIS. Go in to IIS HTTP Response Headers. Add Name: X-UA-Compatible Value: IE=edge This will override your browser and your code.

Private Sub CommandButton1_Click() 

Dim Z As Long 
Dim Cellidx As Range 
Dim NextRow As Long 
Dim Rng As Range 
Dim SrcWks As Worksheet 
Dim DataWks As Worksheet 
Z = 1 
Set SrcWks = Worksheets("Sheet1") 
Set DataWks = Worksheets("Sheet2") 
Set Rng = EntryWks.Range("B6:ad6") 

NextRow = DataWks.UsedRange.Rows.Count 
NextRow = IIf(NextRow = 1, 1, NextRow + 1) 

For Each RA In Rng.Areas 
    For Each Cellidx In RA 
        Z = Z + 1 
        DataWks.Cells(NextRow, Z) = Cellidx 
    Next Cellidx 
Next RA 
End Sub

Alternatively

Worksheets("Sheet2").Range("P2").Value = Worksheets("Sheet1").Range("L10") 

This is a CopynPaste - Method

Sub CopyDataToPlan()

Dim LDate As String
Dim LColumn As Integer
Dim LFound As Boolean

On Error GoTo Err_Execute

'Retrieve date value to search for
LDate = Sheets("Rolling Plan").Range("B4").Value

Sheets("Plan").Select

'Start at column B
LColumn = 2
LFound = False

While LFound = False

  'Encountered blank cell in row 2, terminate search
  If Len(Cells(2, LColumn)) = 0 Then
     MsgBox "No matching date was found."
     Exit Sub

  'Found match in row 2
  ElseIf Cells(2, LColumn) = LDate Then

     'Select values to copy from "Rolling Plan" sheet
     Sheets("Rolling Plan").Select
     Range("B5:H6").Select
     Selection.Copy

     'Paste onto "Plan" sheet
     Sheets("Plan").Select
     Cells(3, LColumn).Select
     Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
     False, Transpose:=False

     LFound = True
     MsgBox "The data has been successfully copied."

     'Continue searching
      Else
         LColumn = LColumn + 1
      End If

   Wend

   Exit Sub

Err_Execute:
  MsgBox "An error occurred."

End Sub

And there might be some methods doing that in Excel.

For your case, you may use regex:

boolean checkFormat;

if (input.matches("([0-9]{2})/([0-9]{2})/([0-9]{4})"))
    checkFormat=true;
else
   checkFormat=false;

For a larger scope or if you want a flexible solution, refer to MadProgrammer's answer.

Edit

Almost 5 years after posting this answer, I realize that this is a stupid way to validate a date format. But i'll just leave this here to tell people that using regex to validate a date is unacceptable

There are 2 differences, unlike r+, w+ will:

• create the file if it does not already exist
• first truncate it, i.e., will delete its contents

The $ sign is an identifier for variables and functions.

https://web.archive.org/web/20160529121559/http://www.authenticsociety.com/blog/javascript_dollarsign

That has a clear explanation of what the dollar sign is for.

Here's an alternative explanation: http://www.vcarrer.com/2010/10/about-dollar-sign-in-javascript.html

You can do this:

<div class"my_class">
<?php if ($cart->count_product > 0) {
          print $cart->count_product; 
      } else { 
          print ''; 
      } 
?>
</div>

Before hitting the div, we are not in PHP tags

There is a package called yum-utils that builds on YUM and contains a tool called repoquery that can do this.

$ repoquery --help | grep -E "list\ files" 
  -l, --list            list files in this package/group

Combined into one example:

$ repoquery -l time
/usr/bin/time
/usr/share/doc/time-1.7
/usr/share/doc/time-1.7/COPYING
/usr/share/doc/time-1.7/NEWS
/usr/share/doc/time-1.7/README
/usr/share/info/time.info.gz

On at least one RH system, with rpm v4.8.0, yum v3.2.29, and repoquery v0.0.11, repoquery -l rpm prints nothing.

If you are having this issue, try adding the --installed flag: repoquery --installed -l rpm.

DNF Update:

To use dnf instead of yum-utils, use the following command:

$ dnf repoquery -l time
/usr/bin/time
/usr/share/doc/time-1.7
/usr/share/doc/time-1.7/COPYING
/usr/share/doc/time-1.7/NEWS
/usr/share/doc/time-1.7/README
/usr/share/info/time.info.gz

The easiest way to configure your system to use single ssh sessions by default with multiplexing.

This can be done by creating a folder for the sockets:

mkdir ~/.ssh/controlmasters

And then adding the following to your .ssh configuration:

Host *
    ControlMaster auto
    ControlPath ~/.ssh/controlmasters/%r@%h:%p.socket
    ControlMaster auto
    ControlPersist 10m

Now, you do not need to modify any of your code. This allows multiple calls to ssh and scp without creating multiple sessions, which is useful when there needs to be more interaction between your local and remote machines.

Thanks to @terminus's answer, http://www.cyberciti.biz/faq/linux-unix-osx-bsd-ssh-multiplexing-to-speed-up-ssh-connections/ and https://en.wikibooks.org/wiki/OpenSSH/Cookbook/Multiplexing.

You can use recursion to do this. I haven't verified the following, but it should give you the right idea:

MergeListOfDf = function( data , ... )
{
    if ( length( data ) == 2 ) 
    {
        return( merge( data[[ 1 ]] , data[[ 2 ]] , ... ) )
    }    
    return( merge( MergeListOfDf( data[ -1 ] , ... ) , data[[ 1 ]] , ... ) )
}

Here's one that looks very promising. It's a true combo - you see what you type. Has a cool feature I haven't seen elsewhere: paging results.

FlexBox

It sounds like you may want to use something like SimpleDateFormat. http://java.sun.com/j2se/1.4.2/docs/api/java/text/SimpleDateFormat.html

You declare your date format and then call the parse method with your string.

private static final DateFormat DF = new SimpleDateFormat(...);
Date myDate = DF.parse("1234");

And as Guillaume says, set the timezone!

First ensure that hlsearch is enabled by issuing the following command

:set hlsearch

You can also add this to your .vimrc file as set

set hlsearch

now when you use the quick search mechanism in command mode or a regular search command, all results will be highlighted. To move forward between results, press 'n' to move backwards press 'N'

In normal mode, to perform a quick search for the word under the cursor and to jump to the next occurrence in one command press '*', you can also search for the word under the cursor and move to the previous occurrence by pressing '#'

In normal mode, quick search can also be invoked with the

/searchterm<Enter>

to remove highlights on ocuurences use, I have bound this to a shortcut in my .vimrc

:nohl

If you only want to solve the extremely limited set of equations mx + c = y for positive integer m, c, y, then this will do:

import re
def solve_linear_equation ( equ ):
    """
    Given an input string of the format "3x+2=6", solves for x.
    The format must be as shown - no whitespace, no decimal numbers,
    no negative numbers.
    """
    match = re.match(r"(\d+)x\+(\d+)=(\d+)", equ)
    m, c, y = match.groups()
    m, c, y = float(m), float(c), float(y) # Convert from strings to numbers
    x = (y-c)/m
    print ("x = %f" % x)

Some tests:

>>> solve_linear_equation("2x+4=12")
x = 4.000000
>>> solve_linear_equation("123x+456=789")
x = 2.707317
>>> 

If you want to recognise and solve arbitrary equations, like sin(x) + e^(i*pi*x) = 1, then you will need to implement some kind of symbolic maths engine, similar to maxima, Mathematica, MATLAB's solve() or Symbolic Toolbox, etc. As a novice, this is beyond your ken.

Zonble has already provided an excellent answer. I thought it may be useful to include a short code snippet for adding a UIView to the tableview cell that will present as the selected background view.

cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:CellIdentifier] autorelease];

    UIView *selectionColor = [[UIView alloc] init];
    selectionColor.backgroundColor = [UIColor colorWithRed:(245/255.0) green:(245/255.0) blue:(245/255.0) alpha:1];
    cell.selectedBackgroundView = selectionColor;

• cell is my UITableViewCell
• I created a UIView and set its background color using RGB colours (light gray)
• I then set the cell selectedBackgroundView to be the UIView that I created with my chosen background colour

This worked well for me. Thanks for the tip Zonble.

Those who are using python 3 and reload from importlib.

If you have problems like it seems that module doesn't reload... That is because it needs some time to recompile pyc (up to 60 sec).I writing this hint just that you know if you have experienced this kind of problem.

I know this is an old question, but nobody mentioned that when your data looks like an array, numpy's loadtxt comes in handy:

>>> import numpy as np
>>> np.loadtxt("myfile.txt")[:, 1]
array([10., 20., 30., 40., 23., 13.])

I have found these solutions that at least work for properly configured Terminus FE 1.1 USB hub chip:

1.To turn off power on all USB ports of a hub, you may unbind the hub from kernel using:

echo "1-4.4.4" > /sys/bus/usb/drivers/usb/unbind

to turn power back on - you may bind it back using

echo "1-4.4.4" > /sys/bus/usb/drivers/usb/bind

2.Switching power at each port individually is trickier: I was able to use hubpower to control each port - but it comes with a downside: hubpower first disconnects the usbdevfs wich causes all of the USB devices to disconect from system, at least on ubuntu:

usb_ioctl.ioctl_code = USBDEVFS_DISCONNECT;
rc = ioctl(fd, USBDEVFS_IOCTL, &usb_ioctl);

With this ioctl disabled I was able to switch off individual port power without detaching all devices - but the power goes back on immediately (probably due to kernel seeing an uninitialized device) which causes USB device just to do a "cold restart" which is what I generally wanted to do. My patched hubpower is here

1. Select cell B3 and click the Conditional Formatting button in the ribbon and choose "New Rule".
2. Select "Use a formula to determine which cells to format"
3. Enter the formula: =IF(B2="X",IF(B3="Y", TRUE, FALSE),FALSE), and choose to fill green when this is true
4. Create another rule and enter the formula =IF(B2="X",IF(B3="W", TRUE, FALSE),FALSE) and choose to fill red when this is true.

More details - conditional formatting with a formula applies the format when the formula evaluates to TRUE. You can use a compound IF formula to return true or false based on the values of any cells.

Edit /etc/paths. Then close the terminal and reopen it.

$ sudo vi /etc/paths

Note: each entry is seperated by line breaks.

/usr/local/bin
/usr/bin
/bin
/usr/sbin
/sbin

I had a similar issue which i solved by making two changes

1. added below entry in application.yaml file

   spring: jackson: serialization.write_dates_as_timestamps: false

2. add below two annotations in pojo

   1. @JsonDeserialize(using = LocalDateDeserializer.class)
   2. @JsonSerialize(using = LocalDateSerializer.class)

   sample example

   import com.fasterxml.jackson.databind.annotation.JsonDeserialize; import com.fasterxml.jackson.databind.annotation.JsonSerialize; public class Customer { //your fields ... @JsonDeserialize(using = LocalDateDeserializer.class) @JsonSerialize(using = LocalDateSerializer.class) protected LocalDate birthdate; }

then the following json requests worked for me

1. sample request format as string

{ "birthdate": "2019-11-28" }

2. sample request format as array

{ "birthdate":[2019,11,18] }

Hope it helps!!

You can copy a string in python via string formatting :

>>> a = 'foo'  
>>> b = '%s' % a  
>>> id(a), id(b)  
(140595444686784, 140595444726400)  

You're probably looking for the meta refresh tag:

<html>
    <head>
        <meta http-equiv="refresh" content="3;url=http://www.somewhere.com/" />
    </head>
    <body>
        <h1>Redirecting in 3 seconds...</h1>
    </body>
</html>

Note that use of meta refresh is deprecated and frowned upon these days, but sometimes it's the only viable option (for example, if you're unable to do server-side generation of HTTP redirect headers and/or you need to support non-JavaScript clients etc).

This message will appear if you are using a case-insensitive file system (e.g. on a Mac) and you're trying to capitalize the name (or another change of case). In which case you need to rename to a third, dummy, name:

svn mv file-name file-name_
svn mv file-name_ FILE_Name
svn commit

The mail server on CentOS 6 and other IPv6 capable server platforms may be bound to IPv6 localhost (::1) instead of IPv4 localhost (127.0.0.1).

Typical symptoms:

[root@host /]# telnet 127.0.0.1 25
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused

[root@host /]# telnet localhost 25
Trying ::1...
Connected to localhost.
Escape character is '^]'.
220 host ESMTP Exim 4.72 Wed, 14 Aug 2013 17:02:52 +0100

[root@host /]# netstat -plant | grep 25
tcp        0      0 :::25                       :::*                        LISTEN      1082/exim           

If this happens, make sure that you don't have two entries for localhost in /etc/hosts with different IP addresses, like this (bad) example:

[root@host /]# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost localhost4.localdomain4 localhost4
::1       localhost localhost.localdomain localhost6 localhost6.localdomain6

To avoid confusion, make sure you only have one entry for localhost, preferably an IPv4 address, like this:

[root@host /]# cat /etc/hosts
127.0.0.1 localhost  localhost.localdomain   localhost4.localdomain4 localhost4
::1       localhost6 localhost6.localdomain6

The simple <u>some text</u> should work for you.

This is a good solution to many problems:

function datetotime ($date, $format = 'YYYY-MM-DD') {

    if ($format == 'YYYY-MM-DD') list($year, $month, $day) = explode('-', $date);
    if ($format == 'YYYY/MM/DD') list($year, $month, $day) = explode('/', $date);
    if ($format == 'YYYY.MM.DD') list($year, $month, $day) = explode('.', $date);

    if ($format == 'DD-MM-YYYY') list($day, $month, $year) = explode('-', $date);
    if ($format == 'DD/MM/YYYY') list($day, $month, $year) = explode('/', $date);
    if ($format == 'DD.MM.YYYY') list($day, $month, $year) = explode('.', $date);

    if ($format == 'MM-DD-YYYY') list($month, $day, $year) = explode('-', $date);
    if ($format == 'MM/DD/YYYY') list($month, $day, $year) = explode('/', $date);
    if ($format == 'MM.DD.YYYY') list($month, $day, $year) = explode('.', $date);

    return mktime(0, 0, 0, $month, $day, $year);

}

Use the Maven debug option, ie mvn -X :

Apache Maven 3.0.3 (r1075438; 2011-02-28 18:31:09+0100)
Maven home: /usr/java/apache-maven-3.0.3
Java version: 1.6.0_12, vendor: Sun Microsystems Inc.
Java home: /usr/java/jdk1.6.0_12/jre
Default locale: en_US, platform encoding: UTF-8
OS name: "linux", version: "2.6.32-32-generic", arch: "i386", family: "unix"
[INFO] Error stacktraces are turned on.
[DEBUG] Reading global settings from /usr/java/apache-maven-3.0.3/conf/settings.xml
[DEBUG] Reading user settings from /home/myhome/.m2/settings.xml
...

In this output, you can see that the settings.xml is loaded from /home/myhome/.m2/settings.xml.

I also found the apache commons IOUtils class , so :

InputStreamReader isr = new InputStreamReader(IOUtils.toInputStream(myString));

You could use a bit of workaround by placing a sass file in folder what you would like to import and import all files in that file like this:

file path:main/current/_current.scss

@import "placeholders"; @import "colors";

and in next dir level file you just use import for file what imported all files from that dir:

file path:main/main.scss

@import "EricMeyerResetCSSv20"; @import "clearfix"; @import "current";

That way you have same number of files, like you are importing the whole dir. Beware of order, file that comes last will override the matching stiles.

INSERT
INTO    first_table f
SELECT  *
FROM    second_table s
ON DUPLICATE KEY
UPDATE
        s.column1 = DO_WHAT_EVER_MUST_BE_DONE_ON_KEY_CLASH(f.column1)

Try the following:

print "First is: %f" % (first)
print "Second is: %f" % (second)

I am unsure what answer is. But apart from that, this will be:

print "DONE: %f DIVIDED BY %f EQUALS %f, SWEET MATH BRO!" % (first, second, ans)

There's a lot of text on Format String Specifiers. You can google it and get a list of specifiers. One thing I forgot to note:

If you try this:

print "First is: %s" % (first)

It converts the float value in first to a string. So that would work as well.

I don't think this is the BEST solution, but it does appear to work. Instead of using the background color, I'm going to just embed an image of the background, position it relatively and then wrap the text in a child element and position it absolute - in the centre.

Just set css property of container div 'pointer-events' as none i.e. 'pointer-events:none;'

1. go to command prompt, and run as Administrator
2. in c:/> prompt -> pip install openpyxl
3. once you run in CMD you will get message like, Successfully installed et-xmlfile-1.0.1 jdcal-1.4.1 openpyxl-3.0.5
4. go to python interactive shell and run openpyxl module
5. openpyxl will work

Try this code,

public void ConnectToAccess()
{
    System.Data.OleDb.OleDbConnection conn = new 
        System.Data.OleDb.OleDbConnection();
    // TODO: Modify the connection string and include any
    // additional required properties for your database.
    conn.ConnectionString = @"Provider=Microsoft.Jet.OLEDB.4.0;" +
        @"Data source= C:\Documents and Settings\username\" +
        @"My Documents\AccessFile.mdb";
    try
    {
        conn.Open();
        // Insert code to process data.
    }
        catch (Exception ex)
    {
        MessageBox.Show("Failed to connect to data source");
    }
    finally
    {
        conn.Close();
    }
}

http://msdn.microsoft.com/en-us/library/5ybdbtte(v=vs.71).aspx

Ctrl+T in Visual Studio 2017.

There should not be an Application.ShutDown(); or .Exit() message.

Application is a static class. It does not refer to the current application. You need to get to the current application and then shut it down like this:

Application.Current.Shutdown();

Because ( is special in regex, you should escape it \( when matching. However, depending on what language you are using, you can easily match ( with string methods like index() or other methods that enable you to find at what position the ( is in. Sometimes, there's no need to use regex.

2020 Answer

1. Enable "Developer mode" in Windows 10 -- gives mklink permissions
2. Ensure symlinks are enabled in git
   • git config --global core.symlinks true
   • or check the checkbox when installing msysgit

Switching branches will force the recreation of missing symlinks.

Be careful, support for Symlinks in git on Windows is relatively new. There are some bugs that still affect some git clients. Notably, symlinks with relative (..) paths are mangled in some programs because of a fixed regression in libgit2. GitKraken is affected by this, for instance.

Assuming you don't want to immediately decode it again like others are suggesting here, you can parse it to a string and then just strip the leading 'b and trailing '.

>>> x = "Hi there " 
>>> x = "Hi there ".encode("utf-8") 
>>> x
b"Hi there \xef\xbf\xbd"
>>> str(x)[2:-1]
"Hi there \\xef\\xbf\\xbd"   

I found that the hostname was not visible to other containers when using docker run. This turns out to be a known issue (perhaps more a known feature), with part of the discussion being:

We should probably add a warning to the docs about using hostname. I think it is rarely useful.

The correct way of assigning a hostname - in terms of container networking - is to define an alias like so:

services:
  some-service:
    networks:
      some-network:
        aliases:
          - alias1
          - alias2

Unfortunately this still doesn't work with docker run. The workaround is to assign the container a name:

docker-compose run --name alias1 some-service

And alias1 can then be pinged from the other containers.

UPDATE: As @grilix points out, you should use docker-compose run --use-aliases to make the defined aliases available.

I would at first split the original string into an array of String with a token " (" and the String at position 0 of the output array is what you would like to have.

String[] output = originalString.split(" (");

String result = output[0];

Very basic example with $lookup.

db.getCollection('users').aggregate([
    {
        $lookup: {
            from: "userinfo",
            localField: "userId",
            foreignField: "userId",
            as: "userInfoData"
        }
    },
    {
        $lookup: {
            from: "userrole",
            localField: "userId",
            foreignField: "userId",
            as: "userRoleData"
        }
    },
    { $unwind: { path: "$userInfoData", preserveNullAndEmptyArrays: true }},
    { $unwind: { path: "$userRoleData", preserveNullAndEmptyArrays: true }}
])

Here is used

 { $unwind: { path: "$userInfoData", preserveNullAndEmptyArrays: true }}, 
 { $unwind: { path: "$userRoleData", preserveNullAndEmptyArrays: true }}

Instead of

{ $unwind:"$userRoleData"} 
{ $unwind:"$userRoleData"}

Because { $unwind:"$userRoleData"} this will return empty or 0 result if no matching record found with $lookup.

Look at placing your radio buttons in a GroupBox.

Its fine to just do char **strings;, char **strings = NULL, or char **strings = {NULL}

but to initialize it you'd have to use malloc:

#include <stdlib.h>
#include <stdio.h>
#include <string.h>

int main(){
    // allocate space for 5 pointers to strings
    char **strings = (char**)malloc(5*sizeof(char*));
    int i = 0;
    //allocate space for each string
    // here allocate 50 bytes, which is more than enough for the strings
    for(i = 0; i < 5; i++){
        printf("%d\n", i);
        strings[i] = (char*)malloc(50*sizeof(char));
    }
    //assign them all something
    sprintf(strings[0], "bird goes tweet");
    sprintf(strings[1], "mouse goes squeak");
    sprintf(strings[2], "cow goes moo");
    sprintf(strings[3], "frog goes croak");
    sprintf(strings[4], "what does the fox say?");
    // Print it out
    for(i = 0; i < 5; i++){
        printf("Line #%d(length: %lu): %s\n", i, strlen(strings[i]),strings[i]);
    } 
    //Free each string
    for(i = 0; i < 5; i++){
        free(strings[i]);
    }
    //finally release the first string
    free(strings);
    return 0;
}

gem update --system

will update the rubygems and will fix the problem.

As mentioned already, the contents are stored at the server. However the session is identified by a session-id, which is stored at the client and send with each request. Usually the session-id is stored in a cookie, but it can also be appended to urls. (That's the PHPSESSID query-parameter you some times see)

I don't think autoplay works on Android, but getting a video to play can be annoyingly tricky. I suggest giving this article a read: Making HTML5 Video work on Android phones.

The easiest thing to do is putting a div with the following CSS in the body:

#hideAll
 {
   position: fixed;
   left: 0px; 
   right: 0px; 
   top: 0px; 
   bottom: 0px; 
   background-color: white;
   z-index: 99; /* Higher than anything else in the document */

 }

(Note that position: fixed won't work in IE6 - I know of no sure-fire way of doing this in that browser)

Add the DIV like so (directly after the opening body tag):

<div style="display: none" id="hideAll">&nbsp;</div>

show the DIV directly after :

 <script type="text/javascript">
   document.getElementById("hideAll").style.display = "block";
 </script> 

and hide it onload:

 window.onload = function() 
  { document.getElementById("hideAll").style.display = "none"; }

or using jQuery

 $(window).load(function() {  document.getElementById("hideAll").style.display = "none"; });

this approach has the advantage that it will also work for clients who have JavaScript turned off. It shouldn't cause any flickering or other side-effects, but not having tested it, I can't entirely guarantee it for every browser out there.

I am using this collection, when I worked in small elements collection.

Where elements lot, I think need use "Dictionary". My code:

NameValueCollection ProdIdes;
string prodId = _cfg.ProdIdes[key];
if (string.IsNullOrEmpty(prodId))
{
    ......
}

Or may be use this:

 string prodId = _cfg.ProdIdes[key] !=null ? "found" : "not found";

A little late, but since I've run into the same problem, in your exact scenario, I figured I'd add my solution.

I have Windows 7 (64-bit) and Office 2010 (32-bit). I tried with the DSN-less connection string:

jdbc:odbc:Driver={Microsoft Access Driver (*.mdb, *.accdb)};DBQ=I:/TeamForge/ORS/CTFORS.accdb

and I tried with the DSN connection, using both the System32 and SysWOW64 versions of the ODBC Admin, and none of that worked.

What finally worked, was to match the bit version of Java with the bit version of Office. Once I did that, I could use either the DSN or DSN less connection mode, without any fuss.

I wrote a script and created a git repository, which solves this issue here: https://github.com/Cazaimi/boot-github-shell-win .

The readme contains instructions on how to set the script up, so that each time you open a new window/tab the private key is added to ssh-agent automatically, and you don't have to worry about this, if you're working with remote git repositories.

I didn't get why anybody suggested to include myDir's parent directory into modulesDirectories in webpack, that should make the trick easily:

resolve: {
    modulesDirectories: [
      'parentDir',
      'node_modules',
    ],
    extensions: ['', '.js', '.jsx']
  },

It's not an answer, but...

To get datetime components individually, better use datetime.timetuple:

time = datetime.now()
time.timetuple()
#-> time.struct_time(
#    tm_year=2014, tm_mon=9, tm_mday=7, 
#    tm_hour=2, tm_min=38, tm_sec=5, 
#    tm_wday=6, tm_yday=250, tm_isdst=-1
#)

It's now easy to get the parts:

ts = time.timetuple()
ts.tm_year
ts.tm_mon
ts.tm_mday
ts.tm_hour
ts.tm_min
ts.tm_sec

There is a rule in react that a JSX expression must have exactly one outermost element.

wrong

const para = (
    <p></p>
    <p></p>
);

correct

const para = (
    <div>
        <p></p>
        <p></p>
    </div>
);

I've used DBDesigner before. It is an open source tool. You might check that out. Not sure if it fits your needs.

Best of luck!

Try this

UPDATE `table` SET `uid` = CASE
    WHEN id = 1 THEN 2952
    WHEN id = 2 THEN 4925
    WHEN id = 3 THEN 1592
    ELSE `uid`
    END
WHERE id  in (1,2,3)

I have just faced with similar issue building LLVM 3.7 version. first check whether you have installed the required library on your system:

$locate libstdc++.so.6.*

Then add the found location to your $LD_LIBRARY_PATH environment variable.

I'm preferred my own way to synchronize all Visual Studio Code extensions between laptops, using .dotfiles and small script to perform updates automatically. This way helps me every time when I want to install all extensions I have without any single mouse activity in Visual Studio Code after installing (via Homebrew).

So I just write each new added extension to .txt file stored at my .dotfiles folder. After that I pull master branch on another laptop to get up-to-date file with all extensions.

Using the script, which Big Rich had written before, with one more change, I can totally synchronise all extensions almost automatically.

Script

cat dart-extensions.txt | xargs -L 1 code --install-extension

And also there is one more way to automate that process. Here you can add a script which looks up a Visual Studio Code extension in realtime and each time when you take a diff between the code --list-extensions command and your .txt file in .dotfiles, you can easily update your file and push it to your remote repository.

Here's a trick I found to compare two branches and show how many commits each branch is ahead of the other (a more general answer on your question 1):

For local branches: git rev-list --left-right --count master...test-branch

For remote branches: git rev-list --left-right --count origin/master...origin/test-branch

This gives output like the following:

1 7

This output means: "Compared to master, test-branch is 7 commits ahead and 1 commit behind."

You can also compare local branches with remote branches, e.g. origin/master...master to find out how many commits the local master branch is ahead/behind its remote counterpart.

I have stumbled upon this problem for one hour. After an hour, I tried debugging and this helped:

$('.list').on('click', 'span', (e) => {
  $(e.target).parent().remove();
});

HTML:

<ul class="list">
  <li class="task">some text<span>X</span></li>
  <li class="task">some text<span>X</span></li>
  <li class="task">some text<span>X</span></li>
  <li class="task">some text<span>X</span></li>
  <li class="task">some text<span>X</span></li>
</ul>

X-UA-Compatible will only override the Document Mode, not the Browser Mode, and will not work for all intranet sites; if this is your case, the best solution is to disable "Display intranet sites in Compatibility View" and set a group policy setting to specify which intranet sites need compatibility mode.

I think what are important in cryptography are not primes itself, but it is the difficulty of prime factorization problem

Suppose you have very very large integer which is known to be product of two primes m and n, it is not easy to find what are m and n. Algorithm such as RSA depends on this fact.

By the way, there is a published paper on algorithm which can "solve" this prime factorization problem in acceptable time using quantum computer. So newer algorithms in cryptography may not rely on this "difficulty" of prime factorization anymore when quantum computer comes to town :)

Apart from all listed answers, I had the same error

I have both access to frontend and backend, I already added cors module app.use(cors()); Still, I was struggling with this error.

After some debugging, I found the issue. When I upload a media which size was more than 1 MB then the error was thrown by Nginx server

<html>

<head>
    <title>413 Request Entity Too Large</title>
</head>

<body>
    <center>
        <h1>413 Request Entity Too Large</h1>
    </center>
    <hr>
    <center>nginx/1.18.0</center>
</body>

</html>

But in the console of frontend, I found the error

Access to XMLHttpRequest at 'https://api.yourbackend.com' from origin 'https://web.yourfromntend.com' has been blocked by CORS policy: No 'Access-Control-Allow-Origin' header is present on the requested resource.

So It makes confusion here. But the route cause of this error was from nginx configuration. It's just because the directive client_max_body_size value has been set to 0 by default. It determines what the allowable HTTP request size can be is client_max_body_size. This directive may already be defined in your nginx.conf file located at /etc/nginx/nginx.conf Now you need to add/edit the value of the directive client_max_body_size either at http or server.

server {
    client_max_body_size 100M;
    ...
}

Once you have set your desired value, save your changes and reload Nginx: service nginx reload

After these changes, It's working well

REFERENCE: https://www.keycdn.com/support/413-request-entity-too-large#:~:text=%23,processed%20by%20the%20web%20server.&text=An%20example%20request%2C%20that%20may,e.g.%20a%20large%20media%20file).

Similar to npocmaka's solution, if you are having more than one line of batch code in your batch file besides the python code, check this out: http://lallouslab.net/2017/06/12/batchography-embedding-python-scripts-in-your-batch-file-script/

@echo off
rem = """
echo some batch commands
echo another batch command
python -x "%~f0" %*
echo some more batch commands
goto :eof

"""
# Anything here is interpreted by Python
import platform
import sys
print("Hello world from Python %s!\n" % platform.python_version())
print("The passed arguments are: %s" % sys.argv[1:])

What this code does is it runs itself as a python file by putting all the batch code into a multiline string. The beginning of this string is in a variable called rem, to make the batch code read it as a comment. The first line containing @echo off is ignored in the python code because of the -x parameter.

it is important to mention that if you want to use \ in your batch code, for example in a file path, you'll have to use r"""...""" to surround it to use it as a raw string without escape sequences.

@echo off
rem = r"""
...
"""

Following the steps mentioned above for =>3.0 for Debug mode

urlpatterns = [
...
]
+ static(settings.MEDIA_URL, document_root=settings.MEDIA_ROOT)

And also the part that caught me out, the above static URL only worked in my main project urls.py file. I was first attempting to add to my app, and wondering why I couldn't see the images.

Lastly make sure you set the following:

MEDIA_ROOT = os.path.join(BASE_DIR, 'media')
MEDIA_URL = '/media/'

Use:

function isInArray(array, search)
{
    return array.indexOf(search) >= 0;
}

// Usage
if(isInArray(my_array, "my_value"))
{
    //...
}

OpenURI is the best; it's as simple as

require 'open-uri'
response = open('http://example.com').read

First you have to add the eventlistener

google.maps.event.addListener(map, 'click', find_closest_marker);

Then create a function that loops through the array of markers and uses the haversine formula to calculate the distance of each marker from the click.

function rad(x) {return x*Math.PI/180;}
function find_closest_marker( event ) {
    var lat = event.latLng.lat();
    var lng = event.latLng.lng();
    var R = 6371; // radius of earth in km
    var distances = [];
    var closest = -1;
    for( i=0;i<map.markers.length; i++ ) {
        var mlat = map.markers[i].position.lat();
        var mlng = map.markers[i].position.lng();
        var dLat  = rad(mlat - lat);
        var dLong = rad(mlng - lng);
        var a = Math.sin(dLat/2) * Math.sin(dLat/2) +
            Math.cos(rad(lat)) * Math.cos(rad(lat)) * Math.sin(dLong/2) * Math.sin(dLong/2);
        var c = 2 * Math.atan2(Math.sqrt(a), Math.sqrt(1-a));
        var d = R * c;
        distances[i] = d;
        if ( closest == -1 || d < distances[closest] ) {
            closest = i;
        }
    }

    alert(map.markers[closest].title);
}

This keeps track of the closest markers and alerts its title.

I have my markers as an array on my map object

The following works for me in Node.js 12.x:

npm i node-fetch;

to initialize the Dropbox instance:

var Dropbox = require("dropbox").Dropbox;
var dbx = new Dropbox({
   accessToken: <your access token>,
   fetch: require("node-fetch")    
});

to e.g. upload a content (an asynchronous method used in this case):

await dbx.filesUpload({
  contents: <your content>,
  path: <file path>
});

A variation on the here-doc trick in the accepted answer by sunny256 is to use the Perl keywords for comments. If your comments are actually some sort of documentation, you can then start using the Perl syntax inside the commented block, which allows you to print it out nicely formatted, convert it to a man-page, etc.

As far as the shell is concerned, you only need to replace 'END' with '=cut'.

echo "before comment"
: <<'=cut'
=pod

=head1 NAME
   podtest.sh - Example shell script with embedded POD documentation

etc.

=cut
echo "after comment"

(Found on "Embedding documentation in shell script")

Tested on Bootstrap version 3.3.2

  $('#myModal').on('hide.bs.modal', function() {
    $(this).removeData();
  });

Grep is not sufficient for this operation.

pcregrep which is found in most of the modern Linux systems can be used as

pcregrep -M  'abc.*(\n|.)*efg' test.txt

where -M, --multiline allow patterns to match more than one line

There is a newer pcre2grep also. Both are provided by the PCRE project.

pcre2grep is available for Mac OS X via Mac Ports as part of port pcre2:

% sudo port install pcre2 

and via Homebrew as:

% brew install pcre

or for pcre2

% brew install pcre2

pcre2grep is also available on Linux (Ubuntu 18.04+)

$ sudo apt install pcre2-utils # PCRE2
$ sudo apt install pcregrep    # Older PCRE

Yes, you can.

@supports (-webkit-touch-callout: none) {
  /* CSS specific to iOS devices */ 
}

@supports not (-webkit-touch-callout: none) {
  /* CSS for other than iOS devices */ 
}

YMMV.

It works because only Safari Mobile implements -webkit-touch-callout: https://developer.mozilla.org/en-US/docs/Web/CSS/-webkit-touch-callout

Please note that @supports does not work in IE. IE will skip both of the above @support blocks above. To find out more see https://hacks.mozilla.org/2016/08/using-feature-queries-in-css/. It is recommended to not use @supports not because of this.

What about Chrome or Firefox on iOS? The reality is these are just skins over the WebKit rendering engine. Hence the above works everywhere on iOS as long as iOS policy does not change. See 2.5.6 in App Store Review Guidelines.

Warning: iOS may remove support for this in any new iOS release in the coming years. You SHOULD try a bit harder to not need the above CSS. An earlier version of this answer used -webkit-overflow-scrolling but a new iOS version removed it. As a commenter pointed out, there are other options to choose from: Go to Supported CSS Properties and search for "Safari on iOS".

I didn't touch the "save to a folder" option. I just copied the two files/directories you mentioned in your question to the new machine, then ran defaults read com.googlecode.iterm2.

See https://apple.stackexchange.com/a/111559

Most of the answers given seem to assume that all the classes we are looking to inherit from are defined by us.

But what if one of the classes is not defined by us, i.e. we cannot change what one of those classes inherits from and therefore cannot make use of the accepted answer, what happens then?

Well the answer depends on if we have at least one of the classes having been defined by us. i.e. there exists a class A among the list of classes we would like to inherit from, where A is created by us.

In addition to the already accepted answer, I propose 3 more instances of this multiple inheritance problem and possible solutions to each.

Inheritance type 1

Ok say you want a class C to extend classes, A and B, where B is a class defined somewhere else, but A is defined by us. What we can do with this is to turn A into an interface then, class C can implement A while extending B.

class A {}
class B {} // Some external class
class C {}

Turns into

interface A {}
class AImpl implements A {}
class B {} // Some external class
class C extends B implements A

Inheritance type 2

Now say you have more than two classes to inherit from, well the same idea still holds - all but one of the classes has to be defined by us. So say we want class A to inherit from the following classes, B, C, ... X where X is a class which is external to us, i.e. defined somewhere else. We apply the same idea of turning all the other classes but the last into an interface then we can have:

interface B {}
class BImpl implements B {}
interface C {}
class CImpl implements C {}
...
class X {}
class A extends X implements B, C, ...

Inheritance type 3

Finally, there is also the case where you have just a bunch of classes to inherit from, but none of them are defined by you. This is a bit trickier, but it is doable by making use of delegation. Delegation allows a class A to pretend to be some other class B but any calls on A to some public method defined in B, actually delegates that call to an object of type B and the result is returned. This makes class A what I would call a Fat class

How does this help?

Well it's simple. You create an interface which specifies the public methods within the external classes which you would like to make use of, as well as methods within the new class you are creating, then you have your new class implement that interface. That may have sounded confusing, so let me explain better.

Initially we have the following external classes B, C, D, ..., X, and we want our new class A to inherit from all those classes.

class B {
    public void foo() {}
}

class C {
    public void bar() {}
}

class D {
    public void fooFoo() {}
}

...

class X {
    public String fooBar() {}
}

Next we create an interface A which exposes the public methods that were previously in class A as well as the public methods from the above classes

interface A {
    void doSomething(); // previously defined in A
    String fooBar(); // from class X
    void fooFoo(); // from class D
    void bar(); // from class C
    void foo(); // from class B
}

Finally, we create a class AImpl which implements the interface A.

class AImpl implements A {
    // It needs instances of the other classes, so those should be
    // part of the constructor
    public AImpl(B b, C c, D d, X x) {}
    ... // define the methods within the interface
}

And there you have it! This is sort of pseudo-inheritance because an object of type A is not a strict descendant of any of the external classes we started with but rather exposes an interface which defines the same methods as in those classes.

You might ask, why we didn't just create a class that defines the methods we would like to make use of, rather than defining an interface. i.e. why didn't we just have a class A which contains the public methods from the classes we would like to inherit from? This is done in order to reduce coupling. We don't want to have classes that use A to have to depend too much on class A (because classes tend to change a lot), but rather to rely on the promise given within the interface A.

Out of the box Swift Mailer can't do STARTTLS, however some nice guys have written a patch for it.

I found patching it was a bit of a chore (probably went about it the wrong way), so have zipped it up ready for download here: Swift Mailer with STARTTLS

This error occurs, due to connection limit reaches the maximum limit, defined in the configuration file my.cnf.

In order to fix this error, login to MySQL as root user (Note: you can login as root, since, mysql will pre-allocate additional one connection for root user) and increase the max_connections variable by using the following command:

SET GLOBAL max_connections = 500;

This change will be there, until next server restart. In order to make this change permanent, you have to modify in your configuration file. You can do this by,

vi /etc/my.cnf

[mysqld]
max_connections = 500

This article has detailed step by step workaround to fix this error. Have a look at it, I hope it may help you. Thanks.

Simple and Easy , just add following

RewriteEngine On
RewriteCond %{HTTPS} off
RewriteRule ^(.*)$ https://%{HTTP_HOST}%{REQUEST_URI} [L,R=301]

This question has already been answered accurately by Richard210363.

However, I would like to point out that there is another way to do this, and to warn that this alternate approach should be avoided, as it causes problems.

As R0MANARMY stated in a comment to the original question, it is possible to create a repo from the existing solution folder using the git command line or even Git Gui. However, when you do this it adds all the files below that folder to the repo, including build output (bin/ obj/ folders) user options files (.suo, .csproj.user) and numerous other files that may be in your solution folder but that you don't want to include in your repo. One unwanted side effect of this is that after building locally, the build output will show up in your "changes" list.

When you add using "Select File | Add to Source Control" in Visual Studio, it intelligently includes the correct project and solution files, and leaves the other ones out. Also it automatically creates a .gitignore file that helps prevent these unwanted files from being added to the repo in the future.

If you have already created a repo that includes these unwanted files and then add the .gitignore file at a later time, the unwanted files will still remain part of the repo and will need to be removed manually... it's probably easier to delete the repo and start over again by creating the repo the correct way.

Stopwatch is designed for this purpose and is one of the best way to measure execution time in .NET.

var watch = System.Diagnostics.Stopwatch.StartNew();
/* the code that you want to measure comes here */
watch.Stop();
var elapsedMs = watch.ElapsedMilliseconds;

Do not use DateTimes to measure execution time in .NET.

I use this with good results:

border-style:hidden;

It also works for:

border-right-style:hidden; /*if you want to hide just a border on a cell*/

Example:

<style type="text/css">_x000D_
      table, th, td {_x000D_
       border: 2px solid green;_x000D_
      }_x000D_
      tr.hide_right > td, td.hide_right{_x000D_
        border-right-style:hidden;_x000D_
      }_x000D_
      tr.hide_all > td, td.hide_all{_x000D_
        border-style:hidden;_x000D_
      }_x000D_
  }_x000D_
</style>_x000D_
<table>_x000D_
  <tr>_x000D_
    <td class="hide_right">11</td>_x000D_
    <td>12</td>_x000D_
    <td class="hide_all">13</td>_x000D_
  </tr>_x000D_
  <tr class="hide_right">_x000D_
    <td>21</td>_x000D_
    <td>22</td>_x000D_
    <td>23</td>_x000D_
  </tr>_x000D_
  <tr class="hide_all">_x000D_
    <td>31</td>_x000D_
    <td>32</td>_x000D_
    <td>33</td>_x000D_
  </tr>_x000D_
</table>

Here is the result:

Semantically what you are trying is invalid html, table element cannot have a div element as a direct child. What you can do is, get your div element inside a td element and than try to hide it

This code will print an asterisk instead of every letter.

import sys
import msvcrt

passwor = ''
while True:
    x = msvcrt.getch()
    if x == '\r':
        break
    sys.stdout.write('*')
    passwor +=x

print '\n'+passwor

you pass the context to class B in it's constructor, and make sure you pass getApplicationContext() instead of a activityContext()

None of these attributes are reliable because per the servlet spec (2.4, 2.5 and 3.0), these attributes are overridden if you include/forward a second time (or if someone calls getNamedDispatcher). I think the only reliable way to get the original request URI/query string is to stick a filter at the beginning of your filter chain in web.xml that sets your own custom request attributes based on request.getRequestURI()/getQueryString() before any forwards/includes take place.

http://www.caucho.com/resin-3.0/webapp/faq.xtp contains an excellent summary of how this works (minus the technical note that a second forward/include messes up your ability to use these attributes).

In CSS3 paged media this is possible using position: running() and content: element().

Example from the CSS Generated Content for Paged Media Module draft:

@top-center {
  content: element(heading); 
}

.runner { 
  position: running(heading);
}

.runner can be any element and heading is an arbitrary name for the slot.

EDIT: to clarify, there is basically no browser support so this was mostly meant to be for future reference/in addition to the 'practical answers' given already.

You have to put the selector.xml file in the drwable folder. Then write: android:background="@drawable/selector". This takes care of the pressed and focussed states.

If you know the list of ids try this query:

SELECT * FROM `Buses` WHERE BusId IN (`list of busIds`)

or if you pull them from another table list of busIds could be another subquery:

SELECT * FROM `Buses` WHERE BusId IN (SELECT SomeId from OtherTable WHERE something = somethingElse)

If you need to compare to another table you need a join:

SELECT * FROM `Buses` JOIN OtheTable on Buses.BusesId = OtehrTable.BusesId

Convert hex to binary

I have ABC123EFFF.

I want to have 001010101111000001001000111110111111111111 (i.e. binary repr. with, say, 42 digits and leading zeroes).

Short answer:

The new f-strings in Python 3.6 allow you to do this using very terse syntax:

>>> f'{0xABC123EFFF:0>42b}'
'001010101111000001001000111110111111111111'

or to break that up with the semantics:

>>> number, pad, rjust, size, kind = 0xABC123EFFF, '0', '>', 42, 'b'
>>> f'{number:{pad}{rjust}{size}{kind}}'
'001010101111000001001000111110111111111111'

Long answer:

What you are actually saying is that you have a value in a hexadecimal representation, and you want to represent an equivalent value in binary.

The value of equivalence is an integer. But you may begin with a string, and to view in binary, you must end with a string.

Convert hex to binary, 42 digits and leading zeros?

We have several direct ways to accomplish this goal, without hacks using slices.

First, before we can do any binary manipulation at all, convert to int (I presume this is in a string format, not as a literal):

>>> integer = int('ABC123EFFF', 16)
>>> integer
737679765503

alternatively we could use an integer literal as expressed in hexadecimal form:

>>> integer = 0xABC123EFFF
>>> integer
737679765503

Now we need to express our integer in a binary representation.

Use the builtin function, format

Then pass to format:

>>> format(integer, '0>42b')
'001010101111000001001000111110111111111111'

This uses the formatting specification's mini-language.

To break that down, here's the grammar form of it:

[[fill]align][sign][#][0][width][,][.precision][type]

To make that into a specification for our needs, we just exclude the things we don't need:

>>> spec = '{fill}{align}{width}{type}'.format(fill='0', align='>', width=42, type='b')
>>> spec
'0>42b'

and just pass that to format

>>> bin_representation = format(integer, spec)
>>> bin_representation
'001010101111000001001000111110111111111111'
>>> print(bin_representation)
001010101111000001001000111110111111111111

String Formatting (Templating) with str.format

We can use that in a string using str.format method:

>>> 'here is the binary form: {0:{spec}}'.format(integer, spec=spec)
'here is the binary form: 001010101111000001001000111110111111111111'

Or just put the spec directly in the original string:

>>> 'here is the binary form: {0:0>42b}'.format(integer)
'here is the binary form: 001010101111000001001000111110111111111111'

String Formatting with the new f-strings

Let's demonstrate the new f-strings. They use the same mini-language formatting rules:

>>> integer = 0xABC123EFFF
>>> length = 42
>>> f'{integer:0>{length}b}'
'001010101111000001001000111110111111111111'

Now let's put this functionality into a function to encourage reusability:

def bin_format(integer, length):
    return f'{integer:0>{length}b}'

And now:

>>> bin_format(0xABC123EFFF, 42)
'001010101111000001001000111110111111111111'    

Aside

If you actually just wanted to encode the data as a string of bytes in memory or on disk, you can use the int.to_bytes method, which is only available in Python 3:

>>> help(int.to_bytes)
to_bytes(...)
    int.to_bytes(length, byteorder, *, signed=False) -> bytes
...

And since 42 bits divided by 8 bits per byte equals 6 bytes:

>>> integer.to_bytes(6, 'big')
b'\x00\xab\xc1#\xef\xff'

In Swift 3, there is no need for completion handler when DispatchQueue finishes one task. Furthermore you can achieve your goal in different ways

One way is this:

    var a: Int?

    let queue = DispatchQueue(label: "com.app.queue")
    queue.sync {

        for  i in 0..<10 {

            print("??" , i)
            a = i
        }
    }

    print("After Queue \(a)")

It will wait until the loop finishes but in this case your main thread will block.

You can also do the same thing like this:

    let myGroup = DispatchGroup()
    myGroup.enter()
    //// Do your task

    myGroup.leave() //// When your task completes
     myGroup.notify(queue: DispatchQueue.main) {

        ////// do your remaining work
    }

One last thing: If you want to use completionHandler when your task completes using DispatchQueue, you can use DispatchWorkItem.

Here is an example how to use DispatchWorkItem:

let workItem = DispatchWorkItem {
    // Do something
}

let queue = DispatchQueue.global()
queue.async {
    workItem.perform()
}
workItem.notify(queue: DispatchQueue.main) {
    // Here you can notify you Main thread
}

The DataRow has also an indexer:

Object cellValue = dt.Rows[i][j];

But i would prefer the strongly typed Field extension method which also supports nullable types:

int number = dt.Rows[i].Field<int>(j);

or even more readable and less error-prone with the name of the column:

double otherNumber = dt.Rows[i].Field<double>("DoubleColumn");

For UTC:

string unixTimestamp = Convert.ToString((int)DateTime.UtcNow.Subtract(new DateTime(1970, 1, 1)).TotalSeconds);

For local system:

string unixTimestamp = Convert.ToString((int)DateTime.Now.Subtract(new DateTime(1970, 1, 1)).TotalSeconds);

            names = db.getSites();
            la = new ArrayAdapter<String>(EditSiteList.this,
                    android.R.layout.simple_list_item_1, names);
            EditSiteList.this.setListAdapter(la);
            listview.invalidateViews();

this code works fine for me.

How about storing the new options in a variable, and then using .html(variable) to replace the data in the container?

# database Intraction

$SQLServer = "YourServerName" #use Server\Instance for named SQL instances!
$SQLDBName = "YourDBName"
$SqlConnection = New-Object System.Data.SqlClient.SqlConnection
$SqlConnection.ConnectionString = "Server = $SQLServer; Database = $SQLDBName; 
User ID= YourUserID; Password= YourPassword" 
$SqlCmd = New-Object System.Data.SqlClient.SqlCommand
$SqlCmd.CommandText = 'StoredProcName'
$SqlCmd.Connection = $SqlConnection 
$SqlAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$SqlAdapter.SelectCommand = $SqlCmd 
$DataSet = New-Object System.Data.DataSet
$SqlAdapter.Fill($DataSet) 
$SqlConnection.Close() 

#End :database Intraction
clear

You could also try editing adb_usb.ini file, located at /home/username/.android/. This file contains id vendor list of devices you want to connect. You just add your device's id vendor in new line (it's one id per line). Then restart adb server and replug your device.

It worked for me on Ubuntu 12.10.

As already stated there is nothing you can do except restore from a backup. At least now you will have learned to always wrap statements in a transaction to see what happens before you decide to commit. Also, if you don't have a backup of your database this will also teach you to make regular backups of your database.

While we haven't been much help for your imediate problem...hopefully these answers will ensure you don't run into this problem again in the future.

As of v6, Java SE ships with JAXB. javax.xml.bind.DatatypeConverter has static methods that make this easy. See parseBase64Binary() and printBase64Binary().

Same problem occurred for me

import tensorflow as tf
hello = tf.constant('Hello World ') 
sess = tf.compat.v1.Session()    *//I got the error on this step when I used 
                                   tf.Session()*
sess.run(hello)

Try replacing it with tf.compact.v1.Session()

How about

sub foo()
  dim r As Range, rows As Long, i As Long
  Set r = ActiveSheet.Range("A1:Z50")
  rows = r.rows.Count
  For i = rows To 1 Step (-1)
    If WorksheetFunction.CountA(r.rows(i)) = 0 Then r.rows(i).Delete
  Next
End Sub

Try this

Option Explicit

Sub Sample()
    Dim i As Long
    Dim DelRange As Range

    On Error GoTo Whoa

    Application.ScreenUpdating = False

    For i = 1 To 50
        If Application.WorksheetFunction.CountA(Range("A" & i & ":" & "Z" & i)) = 0 Then
            If DelRange Is Nothing Then
                Set DelRange = Range("A" & i & ":" & "Z" & i)
            Else
                Set DelRange = Union(DelRange, Range("A" & i & ":" & "Z" & i))
            End If
        End If
    Next i

    If Not DelRange Is Nothing Then DelRange.Delete shift:=xlUp
LetsContinue:
    Application.ScreenUpdating = True

    Exit Sub
Whoa:
    MsgBox Err.Description
    Resume LetsContinue
End Sub

IF you want to delete the entire row then use this code

Option Explicit

Sub Sample()
    Dim i As Long
    Dim DelRange As Range

    On Error GoTo Whoa

    Application.ScreenUpdating = False

    For i = 1 To 50
        If Application.WorksheetFunction.CountA(Range("A" & i & ":" & "Z" & i)) = 0 Then
            If DelRange Is Nothing Then
                Set DelRange = Rows(i)
            Else
                Set DelRange = Union(DelRange, Rows(i))
            End If
        End If
    Next i

    If Not DelRange Is Nothing Then DelRange.Delete shift:=xlUp
LetsContinue:
    Application.ScreenUpdating = True

    Exit Sub
Whoa:
    MsgBox Err.Description
    Resume LetsContinue
End Sub

In order to support refactoring correctly (rename class), then you should use either:

 MyClass.class.getName(); // full name with package

or (thanks to @James Van Huis):

 MyClass.class.getSimpleName(); // class name and no more

import java.io.FileNotFoundException;
import java.io.FileReader;
import java.io.IOException;

import org.json.simple.JSONArray;
import org.json.simple.JSONObject;
import org.json.simple.parser.JSONParser;
import org.json.simple.parser.ParseException;

public class Delete_01 {
    public static void main(String[] args) throws FileNotFoundException,
            IOException, ParseException {

        JSONParser parser = new JSONParser();
        JSONArray jsonArray = (JSONArray) parser.parse(new FileReader(
                "delete_01.json"));

        for (Object o : jsonArray) {
            JSONObject person = (JSONObject) o;

            String strName = (String) person.get("name");
            System.out.println("Name::::" + strName);

            String strCity = (String) person.get("city");
            System.out.println("City::::" + strCity);

            JSONArray arrays = (JSONArray) person.get("cars");
            for (Object object : arrays) {
                System.out.println("cars::::" + object);
            }
            String strJob = (String) person.get("job");
            System.out.println("Job::::" + strJob);
            System.out.println();

        }

    }
}

OSX 10.9, if you dont bother about signed application you might just change

/Applications/IntelliJ\ IDEA\ 12\ CE.app/bin/idea.vmoptions

You have to additionally use the tokens=1,2,... part of the options that the for loop allows. This here will do what you possibly want:

for /f "tokens=1,2,3,4,5,6,7,8,9,10,11,12 delims=;" %a in ("%PATH%") ^
do ( ^
     echo. %b ^
   & echo. %a ^
   & echo. %c ^
   & echo. %d ^
   & echo. %e ^
   & echo. %f ^
   & echo. %g ^
   & echo. %h ^
   & echo. %i ^
   & echo. %j ^
   & echo. %k ^
   & echo. ^
   & echo.   ...and now for some more... ^
   & echo. ^
   & echo. %a ^| %b ___ %c ... %d ^
   & dir "%e" ^
   & cd "%f" ^
   & dir /tw "%g" ^
   & echo. "%h  %i  %j  %k" ^
   & cacls "%f")

This example processes the first 12 tokens (=directories from %path%) only. It uses explicit enumeration of each of the used tokens. Note, that the token names are case sensitive: %a is different from %A.

To be save for paths with spaces, surround all %x with quotes like this "%i". I didn't do it here where I'm only echoing the tokens.

You could also do s.th. like this:

for /f "tokens=1,3,5,7-26* delims=;" %a in ("%PATH%") ^
do ( ^
     echo. %c ^
   & echo. %b ^
   & echo. %a ^
   & echo. %d ^
   & echo. %e ^
   & echo. %f ^
   & echo. %g ^
   & echo. %h ^
   & echo. %i ^
   & echo. %j ^
   & echo. %k )

This one skips tokens 2,4,6 and uses a little shortcut ("7-26") to name the rest of them. Note how %c, %b, %a are processed in reverse order this time, and how they now 'mean' different tokens, compared to the first example.

So this surely isn't the concise explanation you asked for. But maybe the examples help to clarify a little better now...

You should have a look at numpy if you do matrix manipulation. This is a module mainly written in C, which will be much faster than programming in pure python. Here is an example of how to invert a matrix, and do other matrix manipulation.

from numpy import matrix
from numpy import linalg
A = matrix( [[1,2,3],[11,12,13],[21,22,23]]) # Creates a matrix.
x = matrix( [[1],[2],[3]] )                  # Creates a matrix (like a column vector).
y = matrix( [[1,2,3]] )                      # Creates a matrix (like a row vector).
print A.T                                    # Transpose of A.
print A*x                                    # Matrix multiplication of A and x.
print A.I                                    # Inverse of A.
print linalg.solve(A, x)     # Solve the linear equation system.

You can also have a look at the array module, which is a much more efficient implementation of lists when you have to deal with only one data type.

If you are storing metadata in a tag use data attributes eg.

<li id="song1" data-value="song1.ogg"><button onclick="updateSource()">Item1</button></li>

Now use the attribute to get the name of the song

var audio = document.getElementById('audio');
audio.src='audio/ogg/' + document.getElementById('song1').getAttribute('data-value');
audio.load();

Python's print function adds a newline character to its input. If you give it no input it will just print a newline character

print()

Will print an empty line. If you want to have an extra line after some text you're printing, you can a newline to your text

my_str = "hello world"
print(my_str + "\n")

If you're doing this a lot, you can also tell print to add 2 newlines instead of just one by changing the end= parameter (by default end="\n")

print("hello world", end="\n\n")

But you probably don't need this last method, the two before are much clearer.

Test the value against NaN:

<xsl:if test="string(number(myNode)) != 'NaN'">
    <!-- myNode is a number -->
</xsl:if>

This is a shorter version (thanks @Alejandro):

<xsl:if test="number(myNode) = myNode">
    <!-- myNode is a number -->
</xsl:if>

Use o parameter of pgsql command.

-o, --output=FILENAME send query results to file (or |pipe)

psql -d DatabaseName -U UserName -c "SELECT * FROM TABLE" -o /root/Desktop/file.txt

Python 3 handles strings a bit different. Originally there was just one type for strings: str. When unicode gained traction in the '90s the new unicode type was added to handle Unicode without breaking pre-existing code¹. This is effectively the same as str but with multibyte support.

In Python 3 there are two different types:

• The bytes type. This is just a sequence of bytes, Python doesn't know anything about how to interpret this as characters.
• The str type. This is also a sequence of bytes, but Python knows how to interpret those bytes as characters.
• The separate unicode type was dropped. str now supports unicode.

In Python 2 implicitly assuming an encoding could cause a lot of problems; you could end up using the wrong encoding, or the data may not have an encoding at all (e.g. it’s a PNG image).
Explicitly telling Python which encoding to use (or explicitly telling it to guess) is often a lot better and much more in line with the "Python philosophy" of "explicit is better than implicit".

This change is incompatible with Python 2 as many return values have changed, leading to subtle problems like this one; it's probably the main reason why Python 3 adoption has been so slow. Since Python doesn't have static typing² it's impossible to change this automatically with a script (such as the bundled 2to3).

• You can convert str to bytes with bytes('h€llo', 'utf-8'); this should produce b'H\xe2\x82\xacllo'. Note how one character was converted to three bytes.
• You can convert bytes to str with b'H\xe2\x82\xacllo'.decode('utf-8').

Of course, UTF-8 may not be the correct character set in your case, so be sure to use the correct one.

In your specific piece of code, nextline is of type bytes, not str, reading stdout and stdin from subprocess changed in Python 3 from str to bytes. This is because Python can't be sure which encoding this uses. It probably uses the same as sys.stdin.encoding (the encoding of your system), but it can't be sure.

You need to replace:

sys.stdout.write(nextline)

with:

sys.stdout.write(nextline.decode('utf-8'))

or maybe:

sys.stdout.write(nextline.decode(sys.stdout.encoding))

You will also need to modify if nextline == '' to if nextline == b'' since:

>>> '' == b''
False

Also see the Python 3 ChangeLog, PEP 358, and PEP 3112.

¹ There are some neat tricks you can do with ASCII that you can't do with multibyte character sets; the most famous example is the "xor with space to switch case" (e.g. chr(ord('a') ^ ord(' ')) == 'A') and "set 6th bit to make a control character" (e.g. ord('\t') + ord('@') == ord('I')). ASCII was designed in a time when manipulating individual bits was an operation with a non-negligible performance impact.

² Yes, you can use function annotations, but it's a comparatively new feature and little used.

I've been looking at this too and trying to work out how to apply timezone and DST. Here's my code.

    public long applyGMTOffsetDST(long time) {
    // Works out adjustments for timezone and daylight saving time

    Calendar mCalendar = new GregorianCalendar();  
    TimeZone mTimeZone = mCalendar.getTimeZone();  
    boolean dstBool = mTimeZone.getDefault().inDaylightTime( new Date() );
    // add an hour if DST active

    if (dstBool == true) {
        time = time + secondsPerHour;
    }
    // add offest hours
    int mGMTOffset = mTimeZone.getRawOffset();

    if (mGMTOffset > 0) {
        long offsetSeconds = secondsPerHour * mGMTOffset;
        time = time + offsetSeconds;
    }

    return time;
}

This seems to work, but is there a better way to get the actual time off the device which represents a time that is meaningful and accurate to the user?

For Version 78.0.3904.87, OS = Windows 7, 64 bit PC

Steps:

1. Press F12
2. Select Network Tab
3. Select XHR
4. Under Name --> you can see all the XHR requests made.
5. To view Request Headers of a particular XHR request, click on that request. All details about that XHR request will appear on right hand side.

try this may this help

      edittext.addTextChangedListener(new  TextWatcher() {

        @Override
        public void onTextChanged(CharSequence s, int start, int before, int count) {
            // TODO Auto-generated method stub
            Toast.makeText(getApplicationContext(), "onTextChanged", 2000).show();;
            //newuser.setTextColor(Color.RED);
            edittext.setHintTextColor(Color.RED);

        }

        @Override
        public void beforeTextChanged(CharSequence s, int start, int count,
                int after) {
            // TODO Auto-generated method stub

        }

        @Override
        public void afterTextChanged(Editable s) {
            // TODO Auto-generated method stub
            Toast.makeText(getApplicationContext(), "afterTextChanged", 2000).show();;

        }
    });

at least pip3 also works without "=", however, instead of "http" you might need "https"

Final command, which worked for me:

sudo pip3 install --proxy https://{proxy}:{port} {BINARY}

Have you tried copying the schema file to the XML Schema Caching folder for VS? You can find the location of that folder by looking at VS Tools/Options/Test Editor/XML/Miscellaneous. Unfortunately, i don't know where's the schema file for the MS Enterprise Library 4.0.

Update: After installing MS Enterprise Library, it seems there's no .xsd file. However, there's a tool for editing the configuration - EntLibConfig.exe, which you can use to edit the configuration files. Also, if you add the proper config sections to your config file, VS should be able to parse the config file properly. (EntLibConfig will add these for you, or you can add them yourself). Here's an example for the loggingConfiguration section:

<configSections>
    <section name="loggingConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.LoggingSettings, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</configSections>

You also need to add a reference to the appropriate assembly in your project.

Short answer

The Bearer authentication scheme is what you are looking for.

Long answer

Is it related to bears?

Errr... No :)

According to the Oxford Dictionaries, here's the definition of bearer:

bearer _^/'b??r?/
noun

1. A person or thing that carries or holds something.

2. A person who presents a cheque or other order to pay money.

The first definition includes the following synonyms: messenger, agent, conveyor, emissary, carrier, provider.

And here's the definition of bearer token according to the RFC 6750:

1.2. Terminology

Bearer Token

A security token with the property that any party in possession of the token (a "bearer") can use the token in any way that any other party in possession of it can. Using a bearer token does not require a bearer to prove possession of cryptographic key material (proof-of-possession).

The Bearer authentication scheme is registered in IANA and originally defined in the RFC 6750 for the OAuth 2.0 authorization framework, but nothing stops you from using the Bearer scheme for access tokens in applications that don't use OAuth 2.0.

Stick to the standards as much as you can and don't create your own authentication schemes.

An access token must be sent in the Authorization request header using the Bearer authentication scheme:

2.1. Authorization Request Header Field

When sending the access token in the Authorization request header field defined by HTTP/1.1, the client uses the Bearer authentication scheme to transmit the access token.

For example:

GET /resource HTTP/1.1
Host: server.example.com
Authorization: Bearer mF_9.B5f-4.1JqM

[...]

Clients SHOULD make authenticated requests with a bearer token using the Authorization request header field with the Bearer HTTP authorization scheme. [...]

In case of invalid or missing token, the Bearer scheme should be included in the WWW-Authenticate response header:

3. The WWW-Authenticate Response Header Field

If the protected resource request does not include authentication credentials or does not contain an access token that enables access to the protected resource, the resource server MUST include the HTTP WWW-Authenticate response header field [...].

All challenges defined by this specification MUST use the auth-scheme value Bearer. This scheme MUST be followed by one or more auth-param values. [...].

For example, in response to a protected resource request without authentication:

HTTP/1.1 401 Unauthorized
WWW-Authenticate: Bearer realm="example"

And in response to a protected resource request with an authentication attempt using an expired access token:

HTTP/1.1 401 Unauthorized
WWW-Authenticate: Bearer realm="example",
                         error="invalid_token",
                         error_description="The access token expired"

I got into this state recently. After resolving conflicts during a rebase, I committed my changes, rather than running git rebase --continue. This yields the same messages you saw when you ran your git status and git rebase --continue commands. I resolved the issue by running git rebase --abort, and then re-running the rebase. One could likely also skip the rebase, but I wasn't sure what state that would leave me in.

$ git rebase --continue
Applying: <commit message>
No changes - did you forget to use 'git add'?
If there is nothing left to stage, chances are that something else
already introduced the same changes; you might want to skip this patch.

When you have resolved this problem, run "git rebase --continue".
If you prefer to skip this patch, run "git rebase --skip" instead.
To check out the original branch and stop rebasing, run "git rebase --abort".

$ git status
rebase in progress; onto 4df0775
You are currently rebasing branch '<local-branch-name>' on '4df0775'.
  (all conflicts fixed: run "git rebase --continue")

nothing to commit, working directory clean

Most of these answers are old. The latest Safari 14.0.2 (in 2021), has the option to Disable Cross-Origin Restrictions, however, it doesn't work if the paths have ../../ kind of path names; even though Safari correctly resolves to a local file path, it still doesn't permit loading the file, even though it exists. This is a recent bug in Safari 14 that didn't happen in 13.

Service layer is best place to add @Transactional annotations as most of the business logic present here, it contain detail level use-case behaviour.

Suppose we add it to DAO and from service we are calling 2 DAO classes , one failed and other success , in this case if @Transactional not on service one DB will commit and other will rollback.

Hence my recommendation is use this annotation wisely and use at Service layer only.

Github project- java-algos

Check that Apache has execute rights for /root, /root/site and /root/site/about.

Run:

chmod o+x /root /root/site /root/site/about

on delete button click event

public void delete(View v){                

    ListView listview1;
    ArrayList<E> datalist;

    final int position = listview1.getPositionForView((View) v.getParent());
    datalist.remove(position);
    myAdapter.notifyDataSetChanged();

}

Use ampersand to specify the parent selector.

SCSS syntax:

p {
    margin: 2em auto;

    > a {
        color: red;
    }

    &:before {
        content: "";
    }

    &:after {
        content: "* * *";
    }
}

1 : if you are interested only in the static block of the class , the loading the class only would do , and would execute static blocks then all you need is:

Class.forName("Somthing");

2 : if you are interested in loading the class , execute its static blocks and also want to access its its non static part , then you need an instance and then you need:

Class.forName("Somthing").newInstance();

My issue was with my Android Studio install.

I am building out a new CI server and although I installed Android Studio and hooked up the SDK, etc., I did not open the studio with the project -- instead just went to the command line to build. When I subsequently opened the project in the studio, it started prompting for all sorts of updates. Followed the bouncing-ball and then I was able to reach my USB tethered device.

Hopefully, this is helpful for Build Master and DevOps as a "got-cha" to avoid.

This problem occurs in the Response.Redirect and Server.Transfer methods, because both methods call Response.End internally.

The solution for this problem is as follows.

For Server.Transfer, use the Server.Execute method instead.

Visit this link for download an example.

It's as simple as this:

unsigned int foo;
int bar = 10;

foo = (unsigned int)bar;

Or vice versa...

In my case, I have used a URL object instead Path.

File

File file = new File("my_path");
URL url = file.toURI().toURL();

Resource in classpath using classloader

URL url = MyClass.class.getClassLoader().getResource("resource_name")

When I need to read the content, I can use the following code:

InputStream stream = url.openStream();

And you can access the content using an InputStream.

My answer on this question might help you:

int finalHeight, finalWidth;
final ImageView iv = (ImageView)findViewById(R.id.scaled_image);
final TextView tv = (TextView)findViewById(R.id.size_label);
ViewTreeObserver vto = iv.getViewTreeObserver();
vto.addOnPreDrawListener(new ViewTreeObserver.OnPreDrawListener() {
    public boolean onPreDraw() {
        iv.getViewTreeObserver().removeOnPreDrawListener(this);
        finalHeight = iv.getMeasuredHeight();
        finalWidth = iv.getMeasuredWidth();
        tv.setText("Height: " + finalHeight + " Width: " + finalWidth);
        return true;
    }
});

You can then add your image scaling work from within the onPreDraw() method.

i came across the same thing and i figured out what is the issue. When we use the method input, the response we should type should be in double quotes. Like in your line date=input("Example: March 21 | What is the date? ")

You should type when prompted on console "12/12/2015" - note the " thing before and after. This way it will take that as a string and process it as expected. I am not sure if this is limitation of this input method - but it works this way.

Hope it helps

For anyone coming to this topic late, I could see that hitscan's "you probably shouldn't do that" might cause someone to ask what they should do…

The StringBuilder class is often an easy replacement. Consider one of the stream-based classes especially, if your data is coming from a file.

The problem with s += "stuff" is that it has to allocate a completely new area to hold the data and then copy all of the old data to it plus the new stuff - EACH AND EVERY LOOP ITERATION. So, adding five bytes to 1,000,000 with s += "stuff" is extremely costly. If what you want is to just write five bytes to the end and proceed with your program, you have to pick a class that leaves some room for growth:

StringBuilder sb = new StringBuilder(5000);
for (; ; )
    {
        sb.Append("stuff");
    }

StringBuilder will auto-grow by doubling when it's limit is hit. So, you will see the growth pain once at start, once at 5,000 bytes, again at 10,000, again at 20,000. Appending strings will incur the pain every loop iteration.

round(5.59, 1) is working fine. The problem is that 5.6 cannot be represented exactly in binary floating point.

>>> 5.6
5.5999999999999996
>>> 

As Vinko says, you can use string formatting to do rounding for display.

Python has a module for decimal arithmetic if you need that.

You can't use float inside flex container and the reason is that float property does not apply to flex-level boxes as you can see here Fiddle.

So if you want to position child element to right of parent element you can use margin-left: auto but now child element will also push other div to the right as you can see here Fiddle.

What you can do now is change order of elements and set order: 2 on child element so it doesn't affect second div

.parent {_x000D_
  display: flex;_x000D_
}_x000D_
.child {_x000D_
  margin-left: auto;_x000D_
  order: 2;_x000D_
}

<div class="parent">_x000D_
  <div class="child">Ignore parent?</div>_x000D_
  <div>another child</div>_x000D_
</div>

fmod is the standard C function for handling floating-point modulus; I imagine your source was saying that Java handles floating-point modulus the same as C's fmod function. In Java you can use the % operator on doubles the same as on integers:

int x = 5 % 3; // x = 2
double y = .5 % .3; // y = .2

There's an ultimate solution to force all browsers (tested: chrome 25, safari 5.1, IE10, Firefox 16) to ask for save the password using jQuery and ajax request:

JS:

$(document).ready(function() {
    $('form').bind('submit', $('form'), function(event) {
        var form = this;

        event.preventDefault();
        event.stopPropagation();

        if (form.submitted) {
            return;
        }

        form.submitted = true;

        $.ajax({
            url: '/login/api/jsonrpc/',
            data: {
                username: $('input[name=username]').val(),
                password: $('input[name=password]').val()
            },
            success: function(response) {
                form.submitted = false;
                form.submit(); //invoke the save password in browser
            }
        });
    });
});

HTML:

<form id="loginform" action="login.php" autocomplete="on">
    <label for="username">Username</label>
    <input name="username" type="text" value="" autocomplete="on" />
    <label for="password">Password</label>
    <input name="password" type="password" value="" autocomplete="on" />
   <input type="submit" name="doLogin" value="Login" />
</form>

The trick is in stopping the form to submit its own way (event.stopPropagation()), instead send your own code ($.ajax()) and in the ajax's success callback submit the form again so the browser catches it and display the request for password save. You may also add some error handler, etc.

Hope it helped to someone.

The circumflex inside the square brackets means all characters except the subsequent range. You want a circumflex outside of square brackets.

command.Text = "UPDATE Student 
  SET Address = @add, City = @cit
  Where FirstName = @fn and LastName = @add";

How to Run Valgrind

Not to insult the OP, but for those who come to this question and are still new to Linux—you might have to install Valgrind on your system.

sudo apt install valgrind  # Ubuntu, Debian, etc.
sudo yum install valgrind  # RHEL, CentOS, Fedora, etc.

Valgrind is readily usable for C/C++ code, but can even be used for other languages when configured properly (see this for Python).

To run Valgrind, pass the executable as an argument (along with any parameters to the program).

valgrind --leak-check=full \
         --show-leak-kinds=all \
         --track-origins=yes \
         --verbose \
         --log-file=valgrind-out.txt \
         ./executable exampleParam1

The flags are, in short:

• --leak-check=full: "each individual leak will be shown in detail"
• --show-leak-kinds=all: Show all of "definite, indirect, possible, reachable" leak kinds in the "full" report.
• --track-origins=yes: Favor useful output over speed. This tracks the origins of uninitialized values, which could be very useful for memory errors. Consider turning off if Valgrind is unacceptably slow.
• --verbose: Can tell you about unusual behavior of your program. Repeat for more verbosity.
• --log-file: Write to a file. Useful when output exceeds terminal space.

Finally, you would like to see a Valgrind report that looks like this:

HEAP SUMMARY:
    in use at exit: 0 bytes in 0 blocks
  total heap usage: 636 allocs, 636 frees, 25,393 bytes allocated

All heap blocks were freed -- no leaks are possible

ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)

I have a leak, but WHERE?

So, you have a memory leak, and Valgrind isn't saying anything meaningful. Perhaps, something like this:

5 bytes in 1 blocks are definitely lost in loss record 1 of 1
   at 0x4C29BE3: malloc (vg_replace_malloc.c:299)
   by 0x40053E: main (in /home/Peri461/Documents/executable)

Let's take a look at the C code I wrote too:

#include <stdlib.h>

int main() {
    char* string = malloc(5 * sizeof(char)); //LEAK: not freed!
    return 0;
}

Well, there were 5 bytes lost. How did it happen? The error report just says main and malloc. In a larger program, that would be seriously troublesome to hunt down. This is because of how the executable was compiled. We can actually get line-by-line details on what went wrong. Recompile your program with a debug flag (I'm using gcc here):

gcc -o executable -std=c11 -Wall main.c         # suppose it was this at first
gcc -o executable -std=c11 -Wall -ggdb3 main.c  # add -ggdb3 to it

Now with this debug build, Valgrind points to the exact line of code allocating the memory that got leaked! (The wording is important: it might not be exactly where your leak is, but what got leaked. The trace helps you find where.)

5 bytes in 1 blocks are definitely lost in loss record 1 of 1
   at 0x4C29BE3: malloc (vg_replace_malloc.c:299)
   by 0x40053E: main (main.c:4)

Techniques for Debugging Memory Leaks & Errors

• Make use of www.cplusplus.com! It has great documentation on C/C++ functions.
• General advice for memory leaks:
  • Make sure your dynamically allocated memory does in fact get freed.
  • Don't allocate memory and forget to assign the pointer.
  • Don't overwrite a pointer with a new one unless the old memory is freed.
• General advice for memory errors:
  • Access and write to addresses and indices you're sure belong to you. Memory errors are different from leaks; they're often just IndexOutOfBoundsException type problems.
  • Don't access or write to memory after freeing it.

• Sometimes your leaks/errors can be linked to one another, much like an IDE discovering that you haven't typed a closing bracket yet. Resolving one issue can resolve others, so look for one that looks a good culprit and apply some of these ideas:

  • List out the functions in your code that depend on/are dependent on the "offending" code that has the memory error. Follow the program's execution (maybe even in gdb perhaps), and look for precondition/postcondition errors. The idea is to trace your program's execution while focusing on the lifetime of allocated memory.
  • Try commenting out the "offending" block of code (within reason, so your code still compiles). If the Valgrind error goes away, you've found where it is.
• If all else fails, try looking it up. Valgrind has documentation too!

A Look at Common Leaks and Errors

Watch your pointers

60 bytes in 1 blocks are definitely lost in loss record 1 of 1
   at 0x4C2BB78: realloc (vg_replace_malloc.c:785)
   by 0x4005E4: resizeArray (main.c:12)
   by 0x40062E: main (main.c:19)

And the code:

#include <stdlib.h>
#include <stdint.h>

struct _List {
    int32_t* data;
    int32_t length;
};
typedef struct _List List;

List* resizeArray(List* array) {
    int32_t* dPtr = array->data;
    dPtr = realloc(dPtr, 15 * sizeof(int32_t)); //doesn't update array->data
    return array;
}

int main() {
    List* array = calloc(1, sizeof(List));
    array->data = calloc(10, sizeof(int32_t));
    array = resizeArray(array);

    free(array->data);
    free(array);
    return 0;
}

As a teaching assistant, I've seen this mistake often. The student makes use of a local variable and forgets to update the original pointer. The error here is noticing that realloc can actually move the allocated memory somewhere else and change the pointer's location. We then leave resizeArray without telling array->data where the array was moved to.

Invalid write

1 errors in context 1 of 1:
Invalid write of size 1
   at 0x4005CA: main (main.c:10)
 Address 0x51f905a is 0 bytes after a block of size 26 alloc'd
   at 0x4C2B975: calloc (vg_replace_malloc.c:711)
   by 0x400593: main (main.c:5)

And the code:

#include <stdlib.h>
#include <stdint.h>

int main() {
    char* alphabet = calloc(26, sizeof(char));

    for(uint8_t i = 0; i < 26; i++) {
        *(alphabet + i) = 'A' + i;
    }
    *(alphabet + 26) = '\0'; //null-terminate the string?

    free(alphabet);
    return 0;
}

Notice that Valgrind points us to the commented line of code above. The array of size 26 is indexed [0,25] which is why *(alphabet + 26) is an invalid write—it's out of bounds. An invalid write is a common result of off-by-one errors. Look at the left side of your assignment operation.

Invalid read

1 errors in context 1 of 1:
Invalid read of size 1
   at 0x400602: main (main.c:9)
 Address 0x51f90ba is 0 bytes after a block of size 26 alloc'd
   at 0x4C29BE3: malloc (vg_replace_malloc.c:299)
   by 0x4005E1: main (main.c:6)

And the code:

#include <stdlib.h>
#include <stdint.h>

int main() {
    char* destination = calloc(27, sizeof(char));
    char* source = malloc(26 * sizeof(char));

    for(uint8_t i = 0; i < 27; i++) {
        *(destination + i) = *(source + i); //Look at the last iteration.
    }

    free(destination);
    free(source);
    return 0;
}

Valgrind points us to the commented line above. Look at the last iteration here, which is
*(destination + 26) = *(source + 26);. However, *(source + 26) is out of bounds again, similarly to the invalid write. Invalid reads are also a common result of off-by-one errors. Look at the right side of your assignment operation.

The Open Source (U/Dys)topia

How do I know when the leak is mine? How do I find my leak when I'm using someone else's code? I found a leak that isn't mine; should I do something? All are legitimate questions. First, 2 real-world examples that show 2 classes of common encounters.

Jansson: a JSON library

#include <jansson.h>
#include <stdio.h>

int main() {
    char* string = "{ \"key\": \"value\" }";

    json_error_t error;
    json_t* root = json_loads(string, 0, &error); //obtaining a pointer
    json_t* value = json_object_get(root, "key"); //obtaining a pointer
    printf("\"%s\" is the value field.\n", json_string_value(value)); //use value

    json_decref(value); //Do I free this pointer?
    json_decref(root);  //What about this one? Does the order matter?
    return 0;
}

This is a simple program: it reads a JSON string and parses it. In the making, we use library calls to do the parsing for us. Jansson makes the necessary allocations dynamically since JSON can contain nested structures of itself. However, this doesn't mean we decref or "free" the memory given to us from every function. In fact, this code I wrote above throws both an "Invalid read" and an "Invalid write". Those errors go away when you take out the decref line for value.

Why? The variable value is considered a "borrowed reference" in the Jansson API. Jansson keeps track of its memory for you, and you simply have to decref JSON structures independent of each other. The lesson here: read the documentation. Really. It's sometimes hard to understand, but they're telling you why these things happen. Instead, we have existing questions about this memory error.

SDL: a graphics and gaming library

#include "SDL2/SDL.h"

int main(int argc, char* argv[]) {
    if (SDL_Init(SDL_INIT_VIDEO|SDL_INIT_AUDIO) != 0) {
        SDL_Log("Unable to initialize SDL: %s", SDL_GetError());
        return 1;
    }

    SDL_Quit();
    return 0;
}

What's wrong with this code? It consistently leaks ~212 KiB of memory for me. Take a moment to think about it. We turn SDL on and then off. Answer? There is nothing wrong.

That might sound bizarre at first. Truth be told, graphics are messy and sometimes you have to accept some leaks as being part of the standard library. The lesson here: you need not quell every memory leak. Sometimes you just need to suppress the leaks because they're known issues you can't do anything about. (This is not my permission to ignore your own leaks!)

Answers unto the void

How do I know when the leak is mine?
It is. (99% sure, anyway)

How do I find my leak when I'm using someone else's code?
Chances are someone else already found it. Try Google! If that fails, use the skills I gave you above. If that fails and you mostly see API calls and little of your own stack trace, see the next question.

I found a leak that isn't mine; should I do something?
Yes! Most APIs have ways to report bugs and issues. Use them! Help give back to the tools you're using in your project!

Further Reading

Thanks for staying with me this long. I hope you've learned something, as I tried to tend to the broad spectrum of people arriving at this answer. Some things I hope you've asked along the way: How does C's memory allocator work? What actually is a memory leak and a memory error? How are they different from segfaults? How does Valgrind work? If you had any of these, please do feed your curiousity:

• More about malloc, C's memory allocator
• Definition of a segmentation fault
• Definition of a memory leak
• Definition of a memory access error
• How does Valgrind work?

The problem is that Elements only takes the direct child elements of whatever you call it on. If you want all descendants, use the Descendants method:

var query = from c in xmlFile.Descendants("Band")

You can substitue a function pointer with an interface. Lets say you want to run through a collection and do something with each element.

public interface IFunction {
  public void execute(Object o);
}

This is the interface we could pass to some say CollectionUtils2.doFunc(Collection c, IFunction f).

public static void doFunc(Collection c, IFunction f) {
   for (Object o : c) {
      f.execute(o);
   }
}

As an example say we have a collection of numbers and you would like to add 1 to every element.

CollectionUtils2.doFunc(List numbers, new IFunction() {
    public void execute(Object o) {
       Integer anInt = (Integer) o;
       anInt++;
    }
});

You can use a plugin like AutoComplPop to get automatic code completion as you type.

2015 Edit: I personally use YouCompleteMe now.

I had this problem on my Catalina OSX after I installed my Anaconda distribution as well.

This solution worked for me on macOS Catalina as of October 19, 2019

Step 1. Check if .bash_profile is available on your home folder, if not:

• Go to Terminal
• Type cd ~/ to go to your home folder (if you are not on your home folder)
• Type touch .bash_profile to create your new file under the your home folder

Step 2. Check if file .zshrc is available on your home folder, if not:

• Go to terminal and type nano ~/.zshrc

• Type in the following line into the newly created .zshrc file: source ~/.bash_profile

• Now to save the file in nano just hit ctrl+X.

• It will prompt "Save modified buffer (ANSWERING "No" WILL DESTROY CHANGES)?". Just type in Y

Step 3. Check if .bash_profile and .zshrc files are created on your home folder. If yes, in terminal type in source ~/.zshrc

I wrote an EnumUtil class which is making a type check by the enum value:

export class EnumUtils {
  /**
   * Returns the enum keys
   * @param enumObj enum object
   * @param enumType the enum type
   */
  static getEnumKeys(enumObj: any, enumType: EnumType): any[] {
    return EnumUtils.getEnumValues(enumObj, enumType).map(value => enumObj[value]);
  }

  /**
   * Returns the enum values
   * @param enumObj enum object
   * @param enumType the enum type
   */
  static getEnumValues(enumObj: any, enumType: EnumType): any[] {
    return Object.keys(enumObj).filter(key => typeof enumObj[key] === enumType);
  }
}

export enum EnumType {
  Number = 'number',
  String = 'string'
}

How to use it:

enum NumberValueEnum{
  A= 0,
  B= 1
}

enum StringValueEnum{
  A= 'A',
  B= 'B'
}

EnumUtils.getEnumKeys(NumberValueEnum, EnumType.Number);
EnumUtils.getEnumValues(NumberValueEnum, EnumType.Number);

EnumUtils.getEnumKeys(StringValueEnum, EnumType.String);
EnumUtils.getEnumValues(StringValueEnum, EnumType.String);

Result for NumberValueEnum keys: ["A", "B"]

Result for NumberValueEnum values: [0, 1]

Result for StringValueEnumkeys: ["A", "B"]

Result for StringValueEnumvalues: ["A", "B"]

UPDATE `tbl_user` SET `name`=concat('tbl_user.first_name','tbl_user.last_name') WHERE student_roll>965

It is often preferable to avoid loops and use vectorized functions. If that is not possible there are two approaches:

1. Preallocate your data.frame. This is not recommended because indexing is slow for data.frames.
2. Use another data structure in the loop and transform into a data.frame afterwards. A list is very useful here.

Example to illustrate the general approach:

mylist <- list() #create an empty list

for (i in 1:5) {
  vec <- numeric(5) #preallocate a numeric vector
  for (j in 1:5) { #fill the vector
    vec[j] <- i^j 
  }
  mylist[[i]] <- vec #put all vectors in the list
}
df <- do.call("rbind",mylist) #combine all vectors into a matrix

In this example it is not necessary to use a list, you could preallocate a matrix. However, if you do not know how many iterations your loop will need, you should use a list.

Finally here is a vectorized alternative to the example loop:

outer(1:5,1:5,function(i,j) i^j)

As you see it's simpler and also more efficient.

Simply add class="img-responsive" to the video tag. I'm doing this on a current project, and it works. It doesn't need to be wrapped in anything.

<video class="img-responsive" src="file.mp4" autoplay loop/>

It should suffice to say whether bcrypt or SHA-512 (in the context of an appropriate algorithm like PBKDF2) is good enough. And the answer is yes, either algorithm is secure enough that a breach will occur through an implementation flaw, not cryptanalysis.

If you insist on knowing which is "better", SHA-512 has had in-depth reviews by NIST and others. It's good, but flaws have been recognized that, while not exploitable now, have led to the the SHA-3 competition for new hash algorithms. Also, keep in mind that the study of hash algorithms is "newer" than that of ciphers, and cryptographers are still learning about them.

Even though bcrypt as a whole hasn't had as much scrutiny as Blowfish itself, I believe that being based on a cipher with a well-understood structure gives it some inherent security that hash-based authentication lacks. Also, it is easier to use common GPUs as a tool for attacking SHA-2–based hashes; because of its memory requirements, optimizing bcrypt requires more specialized hardware like FPGA with some on-board RAM.

Note: bcrypt is an algorithm that uses Blowfish internally. It is not an encryption algorithm itself. It is used to irreversibly obscure passwords, just as hash functions are used to do a "one-way hash".

Cryptographic hash algorithms are designed to be impossible to reverse. In other words, given only the output of a hash function, it should take "forever" to find a message that will produce the same hash output. In fact, it should be computationally infeasible to find any two messages that produce the same hash value. Unlike a cipher, hash functions aren't parameterized with a key; the same input will always produce the same output.

If someone provides a password that hashes to the value stored in the password table, they are authenticated. In particular, because of the irreversibility of the hash function, it's assumed that the user isn't an attacker that got hold of the hash and reversed it to find a working password.

Now consider bcrypt. It uses Blowfish to encrypt a magic string, using a key "derived" from the password. Later, when a user enters a password, the key is derived again, and if the ciphertext produced by encrypting with that key matches the stored ciphertext, the user is authenticated. The ciphertext is stored in the "password" table, but the derived key is never stored.

In order to break the cryptography here, an attacker would have to recover the key from the ciphertext. This is called a "known-plaintext" attack, since the attack knows the magic string that has been encrypted, but not the key used. Blowfish has been studied extensively, and no attacks are yet known that would allow an attacker to find the key with a single known plaintext.

So, just like irreversible algorithms based cryptographic digests, bcrypt produces an irreversible output, from a password, salt, and cost factor. Its strength lies in Blowfish's resistance to known plaintext attacks, which is analogous to a "first pre-image attack" on a digest algorithm. Since it can be used in place of a hash algorithm to protect passwords, bcrypt is confusingly referred to as a "hash" algorithm itself.

Assuming that rainbow tables have been thwarted by proper use of salt, any truly irreversible function reduces the attacker to trial-and-error. And the rate that the attacker can make trials is determined by the speed of that irreversible "hash" algorithm. If a single iteration of a hash function is used, an attacker can make millions of trials per second using equipment that costs on the order of $1000, testing all passwords up to 8 characters long in a few months.

If however, the digest output is "fed back" thousands of times, it will take hundreds of years to test the same set of passwords on that hardware. Bcrypt achieves the same "key strengthening" effect by iterating inside its key derivation routine, and a proper hash-based method like PBKDF2 does the same thing; in this respect, the two methods are similar.

So, my recommendation of bcrypt stems from the assumptions 1) that a Blowfish has had a similar level of scrutiny as the SHA-2 family of hash functions, and 2) that cryptanalytic methods for ciphers are better developed than those for hash functions.

If you are interested in ImageButton you can try this simple thing :

<ImageButton
    android:layout_width="wrap_content"
    android:layout_height="wrap_content"
    android:src="@android:drawable/ic_button"
    android:background="?attr/selectableItemBackgroundBorderless"
/>

the ansible doc is quite clear https://docs.ansible.com/ansible/latest/collections/ansible/builtin/copy_module.html for parameter src it says the following:

Local path to a file to copy to the remote server.
This can be absolute or relative.
If path is a directory, it is copied recursively. In this case, if path ends with "/", 
only inside contents of that directory are copied to destination. Otherwise, if it 
does not end with "/", the directory itself with all contents is copied. This behavior 
is similar to the rsync command line tool.

So what you need is skip the / at the end of your src path.

- name: copy html file
  copy: src=/home/vagrant/dist dest=/usr/share/nginx/html/

Typing 'my IP' in google search I got my public IP address and pasted it in IP address (the third option). It works for me.

So, youtube gives out the iframe tag as follows:

<iframe width="560" height="315" src="https://www.youtube.com/embed/2EIeUlvHAiM" frameborder="0" allowfullscreen></iframe>

In my case, i just changed it to width="100%" and left the rest as is. It's not the most elegant solution (after all, in different devices you'll get weird ratios) But the video itself does not get deformed, just the frame.