You could define a mapping of air pressure to servo angle, for example:
def calc_angle(pressure, min_p=1000, max_p=1200): return 360 * ((pressure - min_p) / float(max_p - min_p)) angle = calc_angle(pressure)
This will linearly convert pressure
values between min_p
and max_p
to angles between 0 and 360 (you could include min_a
and max_a
to constrain the angle, too).
To pick a data structure, I wouldn't use a list but you could look up values in a dictionary:
d = {1000:0, 1001: 1.8, ...} angle = d[pressure]
but this would be rather time-consuming to type out!
This can happens when one library is loaded into gradle several times. Most often through other connected libraries.
Remove a implementation this library in build.gradle
Then Build -> Clear project
and you can run the assembly)
pandas.Series.astype
You can do something like this :
weather["Temp"] = weather.Temp.astype(float)
You can also use pd.to_numeric
that will convert the column from object to float
Example :
s = pd.Series(['apple', '1.0', '2', -3])
print(pd.to_numeric(s, errors='ignore'))
print("=========================")
print(pd.to_numeric(s, errors='coerce'))
Output:
0 apple
1 1.0
2 2
3 -3
=========================
dtype: object
0 NaN
1 1.0
2 2.0
3 -3.0
dtype: float64
In your case you can do something like this:
weather["Temp"] = pd.to_numeric(weather.Temp, errors='coerce')
convert_objects
Example is as follows
>> pd.Series([1,2,3,4,'.']).convert_objects(convert_numeric=True)
0 1
1 2
2 3
3 4
4 NaN
dtype: float64
You can use this as follows:
weather["Temp"] = weather.Temp.convert_objects(convert_numeric=True)
NaN
... so be careful while using it.Since you input field is a controlled element, you cannot directly change the input field value without modifying the state.
Also in
onHandleSubmit(e) {
e.preventDefault();
const city = this.state.city;
this.props.onSearchTermChange(city);
this.mainInput.value = "";
}
this.mainInput
doesn't refer the input since mainInput is an id
, you need to specify a ref to the input
<input
ref={(ref) => this.mainInput= ref}
onChange={this.onHandleChange}
placeholder="Get current weather..."
value={this.state.city}
type="text"
/>
In you current state the best way is to clear the state to clear the input value
onHandleSubmit(e) {
e.preventDefault();
const city = this.state.city;
this.props.onSearchTermChange(city);
this.setState({city: ""});
}
However if you still for some reason want to keep the value in state even if the form is submitted, you would rather make the input uncontrolled
<input
id="mainInput"
onChange={this.onHandleChange}
placeholder="Get current weather..."
type="text"
/>
and update the value in state onChange
and onSubmit
clear the input using ref
onHandleChange(e) {
this.setState({
city: e.target.value
});
}
onHandleSubmit(e) {
e.preventDefault();
const city = this.state.city;
this.props.onSearchTermChange(city);
this.mainInput.value = "";
}
Having Said that, I don't see any point in keeping the state unchanged, so the first option should be the way to go.
elec_and_weather['DEMAND_t-%i'% k] = np.zeros(len(elec_and_weather['DEMAND']))'
The error comes at the end of the line where you have the (') sign; this error always means that you have a syntax error.
Adding here my experience that hopefully might help somebody.
I was experiencing the same issue on Android emulator in Linux with hot reload. The code was correct as per accepted answer and the emulator could reach the internet (I needed a domain name).
Refreshing manually the app made it work. So maybe it has something to do with the hot reloading.
As Aaron states, you can use .index(value)
, but because that will throw an exception if value
is not present, you should handle that case, even if you're sure it will never happen. A couple options are by checking its presence first, such as:
if value in my_list:
value_index = my_list.index(value)
or by catching the exception as in:
try:
value_index = my_list.index(value)
except:
value_index = -1
You can never go wrong with proper error handling.
You need to understand the difference between classes and objects. From the Java tutorial:
An object is a software bundle of related state and behavior
A class is a blueprint or prototype from which objects are created
You've defined the prototypes but done nothing with them. To use an object, you need to create it. In Java, we use the new
keyword.
new Date();
You will need to assign the object to a variable of the same type as the class the object was created from.
Date d = new Date();
Once you have a reference to the object you can interact with it
d.date("01", "12", "14");
The exception to this is static methods that belong to the class and are referenced through it
public class MyDate{
public static date(){ ... }
}
...
MyDate.date();
In case you aren't aware, Java already has a class for representing dates, you probably don't want to create your own.
The following does not return a response:
You must return anything like return afunction()
or return 'a string'
.
This can solve the issue
Here is brilliant quotes from Apple Developer Forums described delicious details:
unowned
vs unowned(safe)
vs unowned(unsafe)
unowned(safe)
is a non-owning reference that asserts on access that the object is still alive. It's sort of like a weak optional reference that's implicitly unwrapped withx!
every time it's accessed.unowned(unsafe)
is like__unsafe_unretained
in ARC—it's a non-owning reference, but there's no runtime check that the object is still alive on access, so dangling references will reach into garbage memory.unowned
is always a synonym forunowned(safe)
currently, but the intent is that it will be optimized tounowned(unsafe)
in-Ofast
builds when runtime checks are disabled.
unowned
vs weak
unowned
actually uses a much simpler implementation thanweak
. Native Swift objects carry two reference counts, andunowned
references bump the unowned reference count instead of the strong reference count. The object is deinitialized when its strong reference count reaches zero, but it isn't actually deallocated until the unowned reference count also hits zero. This causes the memory to be held onto slightly longer when there are unowned references, but that isn't usually a problem whenunowned
is used because the related objects should have near-equal lifetimes anyway, and it's much simpler and lower-overhead than the side-table based implementation used for zeroing weak references.
Update: In modern Swift weak
internally uses the same mechanism as unowned
does. So this comparison is incorrect because it compares Objective-C weak
with Swift unonwed
.
What is the purpose of keeping the memory alive after owning references reach 0? What happens if code attempts to do something with the object using an unowned reference after it is deinitialized?
The memory is kept alive so that its retain counts are still available. This way, when someone attempts to retain a strong reference to the unowned object, the runtime can check that the strong reference count is greater than zero in order to ensure that it is safe to retain the object.
What happens to owning or unowned references held by the object? Is their lifetime decoupled from the object when it is deinitialized or is their memory also retained until the object is deallocated after the last unowned reference is released?
All resources owned by the object are released as soon as the object's last strong reference is released, and its deinit is run. Unowned references only keep the memory alive—aside from the header with the reference counts, its contents is junk.
Excited, huh?
Swift 4.1 introduces new -Osize
optimization mode.
In Swift 4.1 the compiler now supports a new optimization mode which enables dedicated optimizations to reduce code size.
The Swift compiler comes with powerful optimizations. When compiling with -O the compiler tries to transform the code so that it executes with maximum performance. However, this improvement in runtime performance can sometimes come with a tradeoff of increased code size. With the new -Osize optimization mode the user has the choice to compile for minimal code size rather than for maximum speed.
To enable the size optimization mode on the command line, use -Osize instead of -O.
Further reading : https://swift.org/blog/osize/
On Windows, installation of easy_install is a little bit trickier, but still quite easy. The easiest way to do it is to download the distribute_setup.py file and run it. The easiest way to run the file is to open your downloads folder and double-click on the file.
Next, add the easy_install command and other Python scripts to the command search path, by adding your Python installation’s Scripts folder to the PATH environment variable. To do that, right-click on the “Computer” icon on the Desktop or in the Start menu, and choose “Properties”. Then click on “Advanced System settings” (in Windows XP, click on the “Advanced” tab instead). Then click on the “Environment variables” button. Finally, double-click on the “Path” variable in the “System variables” section, and add the path of your Python interpreter’s Scripts folder. Be sure to delimit it from existing values with a semicolon. Assuming you are using Python 2.7 on the default path, add the following value:
;C:\Python27\Scripts And you are done! To check that it worked, open the Command Prompt and execute easy_install. If you have User Account Control enabled on Windows Vista or Windows 7, it should prompt you for administrator privileges.
Now that you have easy_install, you can use it to install pip:
easy_install pip
If you want a distiction for this case I would recommend to use a matrix
instead, where:
matrix([1,2,3]) == matrix([1,2,3]).transpose()
gives:
matrix([[ True, False, False],
[False, True, False],
[False, False, True]], dtype=bool)
You can also use a ndarray
explicitly adding a second dimension:
array([1,2,3])[None,:]
#array([[1, 2, 3]])
and:
array([1,2,3])[:,None]
#array([[1],
# [2],
# [3]])
Use xpath more directly for both performance and clarity.
time_path <- "//start-valid-time"
temp_path <- "//temperature[@type='hourly']/value"
df <- data.frame(
latitude=data[["number(//point/@latitude)"]],
longitude=data[["number(//point/@longitude)"]],
start_valid_time=sapply(data[time_path], xmlValue),
hourly_temperature=as.integer(sapply(data[temp_path], as, "integer"))
leading to
> head(df, 2)
latitude longitude start_valid_time hourly_temperature
1 29.81 -82.42 2014-02-14T18:00:00-05:00 60
2 29.81 -82.42 2014-02-14T19:00:00-05:00 55
Here's one way:
Stream myStream = null;
OpenFileDialog theDialog = new OpenFileDialog();
theDialog.Title = "Open Text File";
theDialog.Filter = "TXT files|*.txt";
theDialog.InitialDirectory = @"C:\";
if (theDialog.ShowDialog() == DialogResult.OK)
{
try
{
if ((myStream = theDialog.OpenFile()) != null)
{
using (myStream)
{
// Insert code to read the stream here.
}
}
}
catch (Exception ex)
{
MessageBox.Show("Error: Could not read file from disk. Original error: " + ex.Message);
}
}
Modified from here:MSDN OpenFileDialog.OpenFile
EDIT Here's another way more suited to your needs:
private void openToolStripMenuItem_Click(object sender, EventArgs e)
{
OpenFileDialog theDialog = new OpenFileDialog();
theDialog.Title = "Open Text File";
theDialog.Filter = "TXT files|*.txt";
theDialog.InitialDirectory = @"C:\";
if (theDialog.ShowDialog() == DialogResult.OK)
{
string filename = theDialog.FileName;
string[] filelines = File.ReadAllLines(filename);
List<Employee> employeeList = new List<Employee>();
int linesPerEmployee = 4;
int currEmployeeLine = 0;
//parse line by line into instance of employee class
Employee employee = new Employee();
for (int a = 0; a < filelines.Length; a++)
{
//check if to move to next employee
if (a != 0 && a % linesPerEmployee == 0)
{
employeeList.Add(employee);
employee = new Employee();
currEmployeeLine = 1;
}
else
{
currEmployeeLine++;
}
switch (currEmployeeLine)
{
case 1:
employee.EmployeeNum = Convert.ToInt32(filelines[a].Trim());
break;
case 2:
employee.Name = filelines[a].Trim();
break;
case 3:
employee.Address = filelines[a].Trim();
break;
case 4:
string[] splitLines = filelines[a].Split(' ');
employee.Wage = Convert.ToDouble(splitLines[0].Trim());
employee.Hours = Convert.ToDouble(splitLines[1].Trim());
break;
}
}
//Test to see if it works
foreach (Employee emp in employeeList)
{
MessageBox.Show(emp.EmployeeNum + Environment.NewLine +
emp.Name + Environment.NewLine +
emp.Address + Environment.NewLine +
emp.Wage + Environment.NewLine +
emp.Hours + Environment.NewLine);
}
}
}
Just for more one option...You can do it this way too:
MYJSON = {
'username': 'gula_gut',
'pics': '/0/myfavourite.jpeg',
'id': '1'
}
#changing username
MYJSON['username'] = 'calixto'
print(MYJSON['username'])
I hope this can help.
Inspired by yarkee, I combined it with some of the code I already got. You can also call this from another script, just by calling the function run_unit_tests()
without requiring to use the command line, or just call it from the command line with python3 my_test_file.py
.
import my_test_file
my_test_file.run_unit_tests()
Sadly this only works for Python 3.3 or above:
import unittest
class LineBalancingUnitTests(unittest.TestCase):
@classmethod
def setUp(self):
self.maxDiff = None
def test_it_is_sunny(self):
self.assertTrue("a" == "a")
def test_it_is_hot(self):
self.assertTrue("a" != "b")
Runner code:
#! /usr/bin/env python3
# -*- coding: utf-8 -*-
import unittest
from .somewhere import LineBalancingUnitTests
def create_suite(classes, unit_tests_to_run):
suite = unittest.TestSuite()
unit_tests_to_run_count = len( unit_tests_to_run )
for _class in classes:
_object = _class()
for function_name in dir( _object ):
if function_name.lower().startswith( "test" ):
if unit_tests_to_run_count > 0 \
and function_name not in unit_tests_to_run:
continue
suite.addTest( _class( function_name ) )
return suite
def run_unit_tests():
runner = unittest.TextTestRunner()
classes = [
LineBalancingUnitTests,
]
# Comment all the tests names on this list, to run all Unit Tests
unit_tests_to_run = [
"test_it_is_sunny",
# "test_it_is_hot",
]
runner.run( create_suite( classes, unit_tests_to_run ) )
if __name__ == "__main__":
print( "\n\n" )
run_unit_tests()
Editing the code a little, you can pass an array with all unit tests you would like to call:
...
def run_unit_tests(unit_tests_to_run):
runner = unittest.TextTestRunner()
classes = \
[
LineBalancingUnitTests,
]
runner.run( suite( classes, unit_tests_to_run ) )
...
And another file:
import my_test_file
# Comment all the tests names on this list, to run all unit tests
unit_tests_to_run = \
[
"test_it_is_sunny",
# "test_it_is_hot",
]
my_test_file.run_unit_tests( unit_tests_to_run )
Alternatively, you can use load_tests Protocol and define the following method in your test module/file:
def load_tests(loader, standard_tests, pattern):
suite = unittest.TestSuite()
# To add a single test from this file
suite.addTest( LineBalancingUnitTests( 'test_it_is_sunny' ) )
# To add a single test class from this file
suite.addTests( unittest.TestLoader().loadTestsFromTestCase( LineBalancingUnitTests ) )
return suite
If you want to limit the execution to one single test file, you just need to set the test discovery pattern to the only file where you defined the load_tests()
function.
#! /usr/bin/env python3
# -*- coding: utf-8 -*-
import os
import sys
import unittest
test_pattern = 'mytest/module/name.py'
PACKAGE_ROOT_DIRECTORY = os.path.dirname( os.path.realpath( __file__ ) )
loader = unittest.TestLoader()
start_dir = os.path.join( PACKAGE_ROOT_DIRECTORY, 'testing' )
suite = loader.discover( start_dir, test_pattern )
runner = unittest.TextTestRunner( verbosity=2 )
results = runner.run( suite )
print( "results: %s" % results )
print( "results.wasSuccessful: %s" % results.wasSuccessful() )
sys.exit( not results.wasSuccessful() )
References:
Alternatively, to the last main program example, I came up with the following variation after reading the unittest.main()
method implementation:
#! /usr/bin/env python3
# -*- coding: utf-8 -*-
import os
import sys
import unittest
PACKAGE_ROOT_DIRECTORY = os.path.dirname( os.path.realpath( __file__ ) )
start_dir = os.path.join( PACKAGE_ROOT_DIRECTORY, 'testing' )
from testing_package import main_unit_tests_module
testNames = ["TestCaseClassName.test_nameHelloWorld"]
loader = unittest.TestLoader()
suite = loader.loadTestsFromNames( testNames, main_unit_tests_module )
runner = unittest.TextTestRunner(verbosity=2)
results = runner.run( suite )
print( "results: %s" % results )
print( "results.wasSuccessful: %s" % results.wasSuccessful() )
sys.exit( not results.wasSuccessful() )
I encountered the same error once. It was really funny. I had created a backup of the .java file with different filename but the same class name. And kept on trying to build it till I checked all the files in my folder.
As we want to only separate lines, and the writelines
function in python does not support adding separator between lines, I have written the simple code below which best suits this problem:
sep = "\n" # defining the separator
new_lines = sep.join(lines) # lines as an iterator containing line strings
and finally:
with open("file_name", 'w') as file:
file.writelines(new_lines)
and you are done.
Oh my. This is actually so simple!
grouped = df3.groupby(level=0)
df4 = grouped.last()
df4
A B rownum
2001-01-01 00:00:00 0 0 6
2001-01-01 01:00:00 1 1 7
2001-01-01 02:00:00 2 2 8
2001-01-01 03:00:00 3 3 3
2001-01-01 04:00:00 4 4 4
2001-01-01 05:00:00 5 5 5
Follow up edit 2013-10-29
In the case where I have a fairly complex MultiIndex
, I think I prefer the groupby
approach. Here's simple example for posterity:
import numpy as np
import pandas
# fake index
idx = pandas.MultiIndex.from_tuples([('a', letter) for letter in list('abcde')])
# random data + naming the index levels
df1 = pandas.DataFrame(np.random.normal(size=(5,2)), index=idx, columns=['colA', 'colB'])
df1.index.names = ['iA', 'iB']
# artificially append some duplicate data
df1 = df1.append(df1.select(lambda idx: idx[1] in ['c', 'e']))
df1
# colA colB
#iA iB
#a a -1.297535 0.691787
# b -1.688411 0.404430
# c 0.275806 -0.078871
# d -0.509815 -0.220326
# e -0.066680 0.607233
# c 0.275806 -0.078871 # <--- dup 1
# e -0.066680 0.607233 # <--- dup 2
and here's the important part
# group the data, using df1.index.names tells pandas to look at the entire index
groups = df1.groupby(level=df1.index.names)
groups.last() # or .first()
# colA colB
#iA iB
#a a -1.297535 0.691787
# b -1.688411 0.404430
# c 0.275806 -0.078871
# d -0.509815 -0.220326
# e -0.066680 0.607233
Using styling from CSS, you can define how something is positioned. If you define the element as fixed, it will always remain in the same position on the screen at all times.
div
{
position:fixed;
top:20px;
}
If you offer cbind
a set of arguments all of whom are vectors, you will get not a dataframe, but rather a matrix, in this case an all character matrix. They have different features. You can get a dataframe if some of your arguments remain dataframes, Try:
merger <- cbind(Date =as.character(Date),
weather1[ , c("High", "Low", "Avg..High", "Avg.Low")] ,
ScnMov =sale$Scanned.Movement[a] )
I would like to humbly add that according to this SO source: https://stackoverflow.com/a/14671362/1743693, this kind of trouble is now partially solved simply by using the following jQuery instruction:
<script>
$.support.cors = true;
</script>
I tried it on IE10.0.9200, and it worked immediately (using jquery-1.9.0.js).
On chrome 28.0.1500.95 - this instruction doesn't work (this happens all over as david complains in the comments at the link above)
Running chrome with --allow-file-access-from-files did not work for me (as Maistora's claims above)
Finally found answer from here:
Mapping restful ajax requests to spring
I quote:
@RequestBody/@ResponseBody annotations don't use normal view resolvers, they use their own HttpMessageConverters. In order to use these annotations, you should configure these converters in AnnotationMethodHandlerAdapter, as described in the reference (you probably need MappingJacksonHttpMessageConverter).
Firstly add a div with id.
<div id="my_map_add" style="width:100%;height:300px;"></div>
<script type="text/javascript">
function my_map_add() {
var myMapCenter = new google.maps.LatLng(28.5383866, 77.34916609);
var myMapProp = {center:myMapCenter, zoom:12, scrollwheel:false, draggable:false, mapTypeId:google.maps.MapTypeId.ROADMAP};
var map = new google.maps.Map(document.getElementById("my_map_add"),myMapProp);
var marker = new google.maps.Marker({position:myMapCenter});
marker.setMap(map);
}
</script>
<script src="https://maps.googleapis.com/maps/api/js?key=your_key&callback=my_map_add"></script>
Here you can find some public REST services for encryption and security related things: http://security.jelastic.servint.net
This line:
layout = (LinearLayout) findViewById(R.id.statsviewlayout);
Looks for the "statsviewlayout" id in your current 'contentview'. Now you've set that here:
setContentView(new GraphTemperature(getApplicationContext()));
And i'm guessing that new "graphTemperature" does not set anything with that id.
It's a common mistake to think you can just find any view with findViewById. You can only find a view that is in the XML (or appointed by code and given an id).
The nullpointer will be thrown because the layout you're looking for isn't found, so
layout.addView(buyButton);
Throws that exception.
addition: Now if you want to get that view from an XML, you should use an inflater:
layout = (LinearLayout) View.inflate(this, R.layout.yourXMLYouWantToLoad, null);
assuming that you have your linearlayout in a file called "yourXMLYouWantToLoad.xml"
While editing the code (because mild OCD), I noticed that weather is also a list. You should probably consider something like
echo $data[0]->weather[0]->weatherIconUrl[0]->value;
to make sure you are using the weatherIconUrl for the correct date instance.
this help you to understand what is the type of error
<?php
// A valid json string
$json[] = '{"Organization": "PHP Documentation Team"}';
// An invalid json string which will cause an syntax
// error, in this case we used ' instead of " for quotation
$json[] = "{'Organization': 'PHP Documentation Team'}";
foreach ($json as $string) {
echo 'Decoding: ' . $string;
json_decode($string);
switch (json_last_error()) {
case JSON_ERROR_NONE:
echo ' - No errors';
break;
case JSON_ERROR_DEPTH:
echo ' - Maximum stack depth exceeded';
break;
case JSON_ERROR_STATE_MISMATCH:
echo ' - Underflow or the modes mismatch';
break;
case JSON_ERROR_CTRL_CHAR:
echo ' - Unexpected control character found';
break;
case JSON_ERROR_SYNTAX:
echo ' - Syntax error, malformed JSON';
break;
case JSON_ERROR_UTF8:
echo ' - Malformed UTF-8 characters, possibly incorrectly encoded';
break;
default:
echo ' - Unknown error';
break;
}
echo PHP_EOL;
}
?>
Well, probably the simplest way is just parse the XML into dictionaries and then serialize that with simplejson.
I'm afraid there's a conflict with the port number(80). Make sure you don't run some software like Skype that use the same port 80
AddSingleton() creates a single instance of the service when it is first requested and reuses that same instance in all the places where that service is needed.
In a scoped service, with every HTTP request, we get a new instance. However, within the same HTTP request, if the service is required in multiple places, like in the view and in the controller, then the same instance is provided for the entire scope of that HTTP request. But every new HTTP request will get a new instance of the service.
With a transient service, a new instance is provided every time a service instance is requested whether it is in the scope of the same HTTP request or across different HTTP requests.
I was facing the same issue; and the following worked well for me. Hope this helps someone landing here:
<div class="row">
<div class="col-md-6">
<div class="col-md-12">
Set room heater temperature
</div>
</div>
<div class="col-md-6">
<div class="col-md-12">
Set room heater temperature
</div>
</div>
</div>
This will automatically render some space between the 2 divs.
SELECT to_char(to_date(month,'yyyy-mm'),'Mon yyyy'), nos
FROM (SELECT to_char(credit_date,'yyyy-mm') MONTH,count(*) nos
FROM HCN
WHERE TRUNC(CREDIT_dATE) BEtween '01-jul-2014' AND '30-JUN-2015'
AND CATEGORYCODECFR=22
--AND CREDIT_NOTE_NO IS NOT NULL
AND CANCELDATE IS NULL
GROUP BY to_char(credit_date,'yyyy-mm')
ORDER BY to_char(credit_date,'yyyy-mm') ) mm
Output:
Jul 2014 49
Aug 2014 35
Sep 2014 57
Oct 2014 50
Nov 2014 45
Dec 2014 88
Jan 2015 131
Feb 2015 112
Mar 2015 76
Apr 2015 45
May 2015 49
Jun 2015 40
Use this to get an array with the local users and the groups they are member of:
Get-LocalUser |
ForEach-Object {
$user = $_
return [PSCustomObject]@{
"User" = $user.Name
"Groups" = Get-LocalGroup | Where-Object { $user.SID -in ($_ | Get-LocalGroupMember | Select-Object -ExpandProperty "SID") } | Select-Object -ExpandProperty "Name"
}
}
To get an array with the local groups and their members:
Get-LocalGroup |
ForEach-Object {
$group = $_
return [PSCustomObject]@{
"Group" = $group.Name
"Members" = $group | Get-LocalGroupMember | Select-Object -ExpandProperty "Name"
}
}
As Grodriguez says, Integer
objects are immutable. The problem here is that you're trying to increment the int
value of the player ID rather than the ID itself. In Java 5+, you can just write playerID++
.
As a side note, never ever call Integer
's constructor. Take advantage of autoboxing by just assigning int
s to Integer
s directly, like Integer foo = 5
. This will use Integer.valueOf(int)
transparently, which is superior to the constructor because it doesn't always have to create a new object.
Imagine you have a Computer entity, this entity also cannot live without its Software entity and Hardware entity. These form the Computer
aggregate, the mini-ecosystem for the Computer portion of the domain.
Aggregate Root is the mothership entity inside the aggregate (in our case Computer
), it is a common practice to have your repository only work with the entities that are Aggregate Roots, and this entity is responsible for initializing the other entities.
Consider Aggregate Root as an Entry-Point to an Aggregate.
In C# code:
public class Computer : IEntity, IAggregateRoot
{
public Hardware Hardware { get; set; }
public Software Software { get; set; }
}
public class Hardware : IEntity { }
public class Software : IValueObject { }
public class Repository<T> : IRepository<T> where T : IAggregateRoot {}
Keep in mind that Hardware would likely be a ValueObject too (do not have identity on its own), consider it as an example only.
If you want to configure your project logging using log4Net, while using a class library, There is no actual need of any config file. You can configure your log4net logger in a class and can use that class as library.
As log4net provides all the options to configure it.
Please find the code below.
public static void SetLogger(string pathName, string pattern)
{
Hierarchy hierarchy = (Hierarchy)LogManager.GetRepository();
PatternLayout patternLayout = new PatternLayout();
patternLayout.ConversionPattern = pattern;
patternLayout.ActivateOptions();
RollingFileAppender roller = new RollingFileAppender();
roller.AppendToFile = false;
roller.File = pathName;
roller.Layout = patternLayout;
roller.MaxSizeRollBackups = 5;
roller.MaximumFileSize = "1GB";
roller.RollingStyle = RollingFileAppender.RollingMode.Size;
roller.StaticLogFileName = true;
roller.ActivateOptions();
hierarchy.Root.AddAppender(roller);
MemoryAppender memory = new MemoryAppender();
memory.ActivateOptions();
hierarchy.Root.AddAppender(memory);
hierarchy.Root.Level = log4net.Core.Level.Info;
hierarchy.Configured = true;
}
Now instead of calling XmlConfigurator.Configure(new FileInfo("app.config")) you can directly call SetLogger with desired path and pattern to set the logger in Global.asax application start function.
And use the below code to log the error.
public static void getLog(string className, string message)
{
log4net.ILog iLOG = LogManager.GetLogger(className);
iLOG.Error(message); // Info, Fatal, Warn, Debug
}
By using following code you need not to write a single line neither in application web.config nor inside the app.config of library.
No you cannot. The only thing you can do is to insert content. Like so:
p:after {
content: "yo";
}
If that's what I understood, it's like this:
C:\Users\(username)\AppData\Local\Programs\Python\Python(version)
COPY (not delete) python.exe and rename to py.exe and execute:
py filename.py
I want to show you my implementation: ReadyCLI
Advantages:
I developed this project as I needed new features (options, flag, sub-commands) and that could be used in the simplest possible way in my projects.
Hope this is helpful:
public static TValue ParseEnum<TValue>(string value, TValue defaultValue)
where TValue : struct // enum
{
try
{
if (String.IsNullOrEmpty(value))
return defaultValue;
return (TValue)Enum.Parse(typeof (TValue), value);
}
catch(Exception ex)
{
return defaultValue;
}
}
Classes are objects with attributes (state, characteristic) and methods (functions, capacities) that are specific for that object (like the white color and fly powers, respectively, for a duck).
When you create an instance of a class, you can give it some initial personality (state or character like the name and the color of her dress for a newborn). You do this with __init__
.
Basically __init__
sets the instance characteristics automatically when you call instance = MyClass(some_individual_traits)
.
It looks like the phoneGap plugin will allow you to get the device's uid.
http://docs.phonegap.com/en/3.0.0/cordova_device_device.md.html#device.uuid
Update: This is dependent on running native code. We used this solution writing javascript that was being compiled to native code for a native phone application we were creating.
An example on how to use that would be great. There is a couple of examples at the Qt forum, but you're right that the official documentation should be expanded.
QJsonDocument
on its own indeed doesn't produce anything, you will have to add the data to it. That's done through the QJsonObject
, QJsonArray
and QJsonValue
classes. The top-level item needs to be either an array or an object (because 1
is not a valid json document, while {foo: 1}
is.)
You could also use View.setAlpha(float)
to change the visibility precisely.
0 would be transparent, 1 fully visible. ;)
One more :
var a = document.createElement('a');
a.setAttribute('href', dataUri);
a.setAttribute('download', filename);
var aj = $(a);
aj.appendTo('body');
aj[0].click();
aj.remove();
The previously posted solutions have two quirks:
Here's a complete solution that selects all text on focus, but allows selecting a specific cursor point after focus.
$(function () {
var focusedElement;
$(document).on('focus', 'input', function () {
if (focusedElement == this) return; //already focused, return so user can now place cursor at specific point in input.
focusedElement = this;
setTimeout(function () { focusedElement.select(); }, 100); //select all text in any field on focus for easy re-entry. Delay sightly to allow focus to "stick" before selecting.
});
});
To make it work with both text and numbers:
Exact match:
=query(D:E,"select * where D like '"&C1&"'", 0)
Convert search string to lowercase:
=query(D:E,"select * where D like lower('"&C1&"')", 0)
Convert to lowercase and contain part of the search string:
=query(D:E,"select * where D like lower('%"&C1&"%')", 0)
A1 = query/formula
yellow / A:B = result area
green / C1 = search area
blue / D:E = data area
If you get error when the input is text and not numbers; move the data and delete the (now empty) columns. Then move the data back.
$a = ipconfig
$result = $a[8] -replace "IPv4 Address. . . . . . . . . . . :",""
Also check which index of ipconfig has the IPv4 Address
var data = [
{"Id": 10004, "PageName": "club"},
{"Id": 10040, "PageName": "qaz"},
{"Id": 10059, "PageName": "jjjjjjj"}
];
$.each(data, function(i, item) {
alert(data[i].PageName);
});
$.each(data, function(i, item) {
alert(item.PageName);
});
these two options work well, unless you have something like:
var data.result = [
{"Id": 10004, "PageName": "club"},
{"Id": 10040, "PageName": "qaz"},
{"Id": 10059, "PageName": "jjjjjjj"}
];
$.each(data.result, function(i, item) {
alert(data.result[i].PageName);
});
EDIT:
try with this and describes what the result
$.get('/Cms/GetPages/123', function(data) {
alert(data);
});
FOR EDIT 3:
this corrects the problem, but not the idea to use "eval", you should see how are the response in '/Cms/GetPages/123'.
$.get('/Cms/GetPages/123', function(data) {
$.each(eval(data.replace(/[\r\n]/, "")), function(i, item) {
alert(item.PageName);
});
});
A moving average can also be calculated and visualized directly in a line chart by using the following code:
Example using stock price data:
import pandas_datareader.data as web
import matplotlib.pyplot as plt
import datetime
plt.style.use('ggplot')
# Input variables
start = datetime.datetime(2016, 1, 01)
end = datetime.datetime(2018, 3, 29)
stock = 'WFC'
# Extrating data
df = web.DataReader(stock,'morningstar', start, end)
df = df['Close']
print df
plt.plot(df['WFC'],label= 'Close')
plt.plot(df['WFC'].rolling(9).mean(),label= 'MA 9 days')
plt.plot(df['WFC'].rolling(21).mean(),label= 'MA 21 days')
plt.legend(loc='best')
plt.title('Wells Fargo\nClose and Moving Averages')
plt.show()
Tutorial on how to do this: https://youtu.be/XWAPpyF62Vg
SELECT cast( cast(round(37.0/38.0,2) AS DECIMAL(18,2)) as varchar(100)) + ' %'
RESULT: 0.97 %
This code should work for you:
Comment.find(:all, :conditions => {:created_at => @selected_date.beginning_of_day..@selected_date.end_of_day})
For more info have a look at Time calculations
Note: This code is deprecated. Use the code from the answer if you are using Rails 3.1/3.2
For instance an application has two user called ap and auc. I am passing an extra property to each route and handling the routing based on the data i get in $routeChangeStart.
Try this:
angular.module("app").config(['$routeProvider',
function ($routeProvider) {
$routeProvider.
when('/ap', {
templateUrl: 'template1.html',
controller: 'template1',
isAp: 'ap',
}).
when('/auc', {
templateUrl: 'template2.html',
controller: 'template2',
isAp: 'common',
}).
when('/ic', {
templateUrl: 'template3.html',
controller: 'template3',
isAp: 'auc',
}).
when('/mup', {
templateUrl: 'template4.html',
controller: 'template4',
isAp: 'ap',
}).
when('/mnu', {
templateUrl: 'template5.html',
controller: 'template5',
isAp: 'common',
}).
otherwise({
redirectTo: '/ap',
});
}]);
app.js:
.run(['$rootScope', '$location', function ($rootScope, $location) {
$rootScope.$on("$routeChangeStart", function (event, next, current) {
if (next.$$route.isAp != 'common') {
if ($rootScope.userTypeGlobal == 1) {
if (next.$$route.isAp != 'ap') {
$location.path("/ap");
}
}
else {
if (next.$$route.isAp != 'auc') {
$location.path("/auc");
}
}
}
});
}]);
For Print Result to text file
we can follow
echo "test data" > test.txt
This will create test.txt file and written "test data"
If you want to append then
echo "test data" >> test.txt
You can make it even simplier, if you want to avoid extra structures.
service:
mappings:
key1: value1
key2: value2
@Configuration
@EnableConfigurationProperties
public class ServiceConfigurationProperties {
@Bean
@ConfigurationProperties(prefix = "service.mappings")
public Map<String, String> serviceMappings() {
return new HashMap<>();
}
}
And then use it as usual, for example with a constructor:
public class Foo {
private final Map<String, String> serviceMappings;
public Foo(Map<String, String> serviceMappings) {
this.serviceMappings = serviceMappings;
}
}
Conditional Welcome Message
echo 'Welcome '.($user['is_logged_in'] ? $user['first_name'] : 'Guest').'!';
Nested PHP Shorthand
echo 'Your score is: '.($score > 10 ? ($age > 10 ? 'Average' : 'Exceptional') : ($age > 10 ? 'Horrible' : 'Average') );
The new v8 engine which should come out today supports it (i think)
You can also use DEV_RANDOM, where 128 = 1/2 the generated token length. Code below generates 256 token.
$token = bin2hex(mcrypt_create_iv(128, MCRYPT_DEV_RANDOM));
To Enable the Bluetooth you could use either of the following functions:
public void enableBT(View view){
BluetoothAdapter mBluetoothAdapter = BluetoothAdapter.getDefaultAdapter();
if (!mBluetoothAdapter.isEnabled()){
Intent intentBtEnabled = new Intent(BluetoothAdapter.ACTION_REQUEST_ENABLE);
// The REQUEST_ENABLE_BT constant passed to startActivityForResult() is a locally defined integer (which must be greater than 0), that the system passes back to you in your onActivityResult()
// implementation as the requestCode parameter.
int REQUEST_ENABLE_BT = 1;
startActivityForResult(intentBtEnabled, REQUEST_ENABLE_BT);
}
}
The second function is:
public void enableBT(View view){
BluetoothAdapter mBluetoothAdapter = BluetoothAdapter.getDefaultAdapter();
if (!mBluetoothAdapter.isEnabled()){
mBluetoothAdapter.enable();
}
}
The difference is that the first function makes the app ask the user a permission to turn on the Bluetooth or to deny. The second function makes the app turn on the Bluetooth directly.
To Disable the Bluetooth use the following function:
public void disableBT(View view){
BluetoothAdapter mBluetoothAdapter = BluetoothAdapter.getDefaultAdapter();
if (mBluetoothAdapter.isEnabled()){
mBluetoothAdapter.disable();
}
}
NOTE/ The first function needs only the following permission to be defined in the AndroidManifest.xml file:
<uses-permission android:name="android.permission.BLUETOOTH"/>
While, the second and third functions need the following permissions:
<uses-permission android:name="android.permission.BLUETOOTH"/>
<uses-permission android:name="android.permission.BLUETOOTH_ADMIN"/>
We're talking about C++ right? Why on earth are we still using macros!?
C++ inline functions give you the same speed as a macro, with the added benefit of type-safety and parameter evaluation (which avoids the issue that Rodney and dwj mentioned.
inline const char * const BoolToString(bool b)
{
return b ? "true" : "false";
}
Aside from that I have a few other gripes, particularly with the accepted answer :)
// this is used in C, not C++. if you want to use printf, instead include <cstdio>
//#include <stdio.h>
// instead you should use the iostream libs
#include <iostream>
// not only is this a C include, it's totally unnecessary!
//#include <stdarg.h>
// Macros - not type-safe, has side-effects. Use inline functions instead
//#define BOOL_STR(b) (b?"true":"false")
inline const char * const BoolToString(bool b)
{
return b ? "true" : "false";
}
int main (int argc, char const *argv[]) {
bool alpha = true;
// printf? that's C, not C++
//printf( BOOL_STR(alpha) );
// use the iostream functionality
std::cout << BoolToString(alpha);
return 0;
}
Cheers :)
@DrPizza: Include a whole boost lib for the sake of a function this simple? You've got to be kidding?
You did not add #
before id of the button. You do not have right selector in your jquery code. So jquery is never execute in your button click. its submitted your form directly not passing any ajax request.
See documentation: http://api.jquery.com/category/selectors/
its your friend.
Try this:
It seems that id: $("#Shareitem").val()
is wrong if you want to pass the value of
<input type="hidden" name="id" value="" id="id">
you need to change this line:
id: $("#Shareitem").val()
by
id: $("#id").val()
All together:
<script src="http://code.jquery.com/jquery-1.11.0.min.js"></script>
<script>
$(document).ready(function(){
$("#Shareitem").click(function(e){
e.preventDefault();
$.ajax({type: "POST",
url: "/imball-reagens/public/shareitem",
data: { id: $("#Shareitem").val(), access_token: $("#access_token").val() },
success:function(result){
$("#sharelink").html(result);
}});
});
});
</script>
You can set the "background image" to an activity by setting android:background
xml attributes as followings:
(Here, for example, Take a LinearLayout for an activity and setting a background image for the layout(i.e. indirectly to an activity))
<?xml version="1.0" encoding="utf-8"?>
<LinearLayout android:id="@+id/LinearLayout01"
android:layout_width="fill_parent"
android:layout_height="fill_parent"
xmlns:android="http://schemas.android.com/apk/res/android"
android:background="@drawable/icon">
</LinearLayout>
The following Python code will turn your string into a list of strings:
import ast
teststr = "['aaa','bbb','ccc']"
testarray = ast.literal_eval(teststr)
If a computer can run it, a suitably motivated human can reverse-engineer it.
From my programming archive:
function querystring(key) {
var re=new RegExp('(?:\\?|&)'+key+'=(.*?)(?=&|$)','gi');
var r=[], m;
while ((m=re.exec(document.location.search)) != null) r[r.length]=m[1];
return r;
}
If the value doesn't exist, an empty array is returned.
If the value exists, an array is return that has one item, the value.
If several values with the name exists, an array containing each value is returned.
Examples:
var param1var = querystring("param1")[0];
document.write(querystring("name"));
if (querystring('id')=='42') alert('We apoligize for the inconvenience.');
if (querystring('button').length>0) alert(querystring('info'));
It looks like in the ECMAScript 6 proposal there are the Array
methods find()
and findIndex()
. MDN also offers polyfills which you can include to get the functionality of these across all browsers.
function isPrime(element, index, array) {
var start = 2;
while (start <= Math.sqrt(element)) {
if (element % start++ < 1) return false;
}
return (element > 1);
}
console.log( [4, 6, 8, 12].find(isPrime) ); // undefined, not found
console.log( [4, 5, 8, 12].find(isPrime) ); // 5
function isPrime(element, index, array) {
var start = 2;
while (start <= Math.sqrt(element)) {
if (element % start++ < 1) return false;
}
return (element > 1);
}
console.log( [4, 6, 8, 12].findIndex(isPrime) ); // -1, not found
console.log( [4, 6, 7, 12].findIndex(isPrime) ); // 2
Two ways for block commenting:
or
You could use the INDIRECT function. This takes a string and converts it into a range
More info here
=INDIRECT("K"&A2)
But it's preferable to use INDEX as it is less volatile.
=INDEX(K:K,A2)
This returns a value or the reference to a value from within a table or range
More info here
Put either function into cell B2 and fill down.
There actually seems to be a method in GMap3. It's a static method of the google.maps.geometry.spherical
namespace.
It takes as arguments two LatLng
objects and will utilize a default Earth radius of 6378137 meters, although the default radius can be overridden with a custom value if necessary.
Make sure you include:
<script type="text/javascript" src="http://maps.google.com/maps/api/js?sensor=false&v=3&libraries=geometry"></script>
in your head section.
The call will be:
google.maps.geometry.spherical.computeDistanceBetween (latLngA, latLngB);
The PHP equivalent is time()
: http://php.net/manual/en/function.time.php
TypeError: Cannot read property 'then' of undefined when calling a Django service using AngularJS.
If you are calling a Python service, the code will look like below:
this.updateTalentSupplier=function(supplierObj){
var promise = $http({
method: 'POST',
url: bbConfig.BWS+'updateTalentSupplier/',
data:supplierObj,
withCredentials: false,
contentType:'application/json',
dataType:'json'
});
return promise; //Promise is returned
}
We are using MongoDB as the database(I know it doesn't matter. But if someone is searching with MongoDB + Python (Django) + AngularJS the result should come.
try this instead $(".video-divs.focused")
. This works if you are looking for video-divs that are focused.
In Java multiple inheritance is not permitted for implementations (classes) only for interfaces:
interface A extends B, C
E.g. MouseInputListener extends MouseListener and MouseMotionListener
And, of course, a class can implement several interfaces:
class X implements A, F
This is the way (I was thinking it's impossible):
First give the table only vertical border-spacing (for example 5px) and set it's horizontal border-spacing to 0. Then you should give proper borders to each row cell. For example the right-most cell in each row should have border on top, bottom and right. The left-most cells should have border on top, bottom and left. And the other cells between these 2 should only have border on top and bottom. Like this example:
<table style="border-spacing:0 5px; color:black">
<tr>
<td style="border-bottom:thin black solid; border-top:thin black solid; border-left:thin black solid;">left-most cell</td>
<td style="border-bottom:thin black solid; border-top:thin black solid;">other cell</td>
<td style="border-bottom:thin black solid; border-top:thin black solid;">other cell</td>
<td style="border-bottom:thin black solid; border-top:thin black solid;">other cell</td>
<td style="border-bottom:thin black solid; border-top:thin black solid; border-right:thin black solid;">right-most cell</td>
</tr>
<tr>
<td style="border-bottom:thin black solid; border-top:thin black solid; border-left:thin black solid;">left-most cell</td>
<td style="border-bottom:thin black solid; border-top:thin black solid;">other cell</td>
<td style="border-bottom:thin black solid; border-top:thin black solid;">other cell</td>
<td style="border-bottom:thin black solid; border-top:thin black solid;">other cell</td>
<td style="border-bottom:thin black solid; border-top:thin black solid; border-right:thin black solid;">right-most cell</td>
</tr>
<tr>
<td style="border-bottom:thin black solid; border-top:thin black solid; border-left:thin black solid;">left-most cell</td>
<td style="border-bottom:thin black solid; border-top:thin black solid;">other cell</td>
<td style="border-bottom:thin black solid; border-top:thin black solid;">other cell</td>
<td style="border-bottom:thin black solid; border-top:thin black solid;">other cell</td>
<td style="border-bottom:thin black solid; border-top:thin black solid; border-right:thin black solid;">right-most cell</td>
</tr>
</table>
Here is one more example. (check the reference)
const myObject = {_x000D_
"employeeid": "160915848",_x000D_
"firstName": "tet",_x000D_
"lastName": "test",_x000D_
"email": "[email protected]",_x000D_
"country": "Brasil",_x000D_
"currentIndustry": "aaaaaaaaaaaaa",_x000D_
"otherIndustry": "aaaaaaaaaaaaa",_x000D_
"currentOrganization": "test",_x000D_
"salary": "1234567"_x000D_
};_x000D_
const {otherIndustry, ...otherIndustry2} = myObject;_x000D_
console.log(otherIndustry2);
_x000D_
.as-console-wrapper {_x000D_
max-height: 100% !important;_x000D_
top: 0;_x000D_
}
_x000D_
I have defined this:
if (PHP_SAPI === 'cli')
{
define( "LNBR", PHP_EOL);
}
else
{
define( "LNBR", "<BR/>");
}
After this use LNBR
wherever I want to use \n
.
This is another way. In my case I have:
Inside the button I have this code:
Image myImage = Image.FromFile(@"C:\imagenes\myImage.gif");
Bitmap croppedBitmap = new Bitmap(myImage);
croppedBitmap = croppedBitmap.Clone(
new Rectangle(
(int)LeftMargin.Value, (int)TopMargin.Value,
myImage.Width - (int)LeftMargin.Value,
myImage.Height - (int)TopMargin.Value),
System.Drawing.Imaging.PixelFormat.DontCare);
pictureBox1.Image = croppedBitmap;
I tried it in Visual studio 2012 using C#. I found this solution from this page
You can use a kind of continue
by using a nested Do ... Loop While False
:
'This sample will output 1 and 3 only
Dim i As Integer
For i = 1 To 3: Do
If i = 2 Then Exit Do 'Exit Do is the Continue
Debug.Print i
Loop While False: Next i
You can't change the size of an array. You can, however, create a new array with the right size and copy the data from the old array to the new.
But your best option is to use IntList from jacarta commons. (here)
It works just like a List but takes less space and is more efficient than that, because it stores int's instead of storing wrapper objects over int's (that's what the Integer class is).
state={
name:"",
email:""
}
handalSubmit = () => {
after api call
let resetFrom = {}
fetch('url')
.then(function(response) {
if(response.success){
resetFrom{
name:"",
email:""
}
}
})
this.setState({...resetFrom})
}
str_replace will do the trick thusly
$new_str = str_replace(' ', '', $old_str);
Select google map activity
you need a Google Maps API key.
To get one, follow this link, follow the directions and press "Create" at the end: https://console.developers.google.com/flows/enableapi?apiid=maps_android_backend&keyType=CLIENT_SIDE_ANDROID&r=48:C7:A8:5B:31:4F:78:F2:38:41:97:F4:70:C3:A0:EB:6A:73:28:88%3Bcom.example.myapplication
Paste this Code in MapsActivity.java
import android.Manifest; import android.content.pm.PackageManager; import android.location.Location; import android.os.Build; import android.os.Bundle; import android.widget.Toast; import androidx.core.app.ActivityCompat; import androidx.core.content.ContextCompat; import androidx.fragment.app.FragmentActivity; import com.google.android.gms.common.ConnectionResult; import com.google.android.gms.common.api.GoogleApiClient; import com.google.android.gms.location.LocationListener; import com.google.android.gms.location.LocationRequest; import com.google.android.gms.location.LocationServices; import com.google.android.gms.maps.CameraUpdateFactory; import com.google.android.gms.maps.GoogleMap; import com.google.android.gms.maps.OnMapReadyCallback; import com.google.android.gms.maps.SupportMapFragment; import com.google.android.gms.maps.model.BitmapDescriptorFactory; import com.google.android.gms.maps.model.LatLng; import com.google.android.gms.maps.model.Marker; import com.google.android.gms.maps.model.MarkerOptions; public class MapsActivity extends FragmentActivity implement OnMapReadyCallback, GoogleApiClient.ConnectionCallbacks, GoogleApiClient.OnConnectionFailedListener, LocationListener{
@private GoogleMap mMap;
GoogleApiClient mGoogleApiClient;
Location mLastLocation;
Marker mCurrLocationMarker;
LocationRequest mLocationRequest;
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_maps);
if (android.os.Build.VERSION.SDK_INT >= Build.VERSION_CODES.M) {
checkLocationPermission();
}
// Obtain the SupportMapFragment and get notified when the map is ready to be used.
SupportMapFragment mapFragment = (SupportMapFragment) getSupportFragmentManager()
.findFragmentById(R.id.map);
mapFragment.getMapAsync(this);
}
@Override
public void onMapReady(GoogleMap googleMap) {
mMap = googleMap;
//Initialize Google Play Services
if (android.os.Build.VERSION.SDK_INT >= Build.VERSION_CODES.M) {
if (ContextCompat.checkSelfPermission(this,
Manifest.permission.ACCESS_FINE_LOCATION) ==
PackageManager.PERMISSION_GRANTED) {
buildGoogleApiClient();
mMap.setMyLocationEnabled(true);
}
} else {
buildGoogleApiClient();
mMap.setMyLocationEnabled(true);
}
}
protected synchronized void buildGoogleApiClient() {
mGoogleApiClient = new GoogleApiClient.Builder(this)
.addConnectionCallbacks(this)
.addOnConnectionFailedListener(this)
.addApi(LocationServices.API)
.build();
mGoogleApiClient.connect();
}
@Override
public void onConnected(Bundle bundle) {
mLocationRequest = new LocationRequest();
mLocationRequest.setInterval(1000);
mLocationRequest.setFastestInterval(1000);
mLocationRequest.setPriority(LocationRequest.PRIORITY_BALANCED_POWER_ACCURACY);
if (ContextCompat.checkSelfPermission(this,
Manifest.permission.ACCESS_FINE_LOCATION) ==
PackageManager.PERMISSION_GRANTED) {
LocationServices.FusedLocationApi.requestLocationUpdates(mGoogleApiClient, mLocationRequest, this);
}
}
@Override
public void onConnectionSuspended(int i) {
}
@Override
public void onLocationChanged(Location location) {
mLastLocation = location;
if (mCurrLocationMarker != null) {
mCurrLocationMarker.remove();
}
//Place current location marker
LatLng latLng = new LatLng(location.getLatitude(), location.getLongitude());
MarkerOptions markerOptions = new MarkerOptions();
markerOptions.position(latLng);
markerOptions.title("Current Position");
markerOptions.icon(BitmapDescriptorFactory.defaultMarker(BitmapDescriptorFactory.HUE_MAGENTA));
mCurrLocationMarker = mMap.addMarker(markerOptions);
//move map camera
mMap.moveCamera(CameraUpdateFactory.newLatLng(latLng));
mMap.animateCamera(CameraUpdateFactory.zoomTo(14));
//stop location updates
if (mGoogleApiClient != null) {
LocationServices.FusedLocationApi.removeLocationUpdates(mGoogleApiClient, this);
}
}
@Override
public void onConnectionFailed(ConnectionResult connectionResult) {
}
public static final int MY_PERMISSIONS_REQUEST_LOCATION = 99;
public boolean checkLocationPermission() {
if (ContextCompat.checkSelfPermission(this,
Manifest.permission.ACCESS_FINE_LOCATION) !=
PackageManager.PERMISSION_GRANTED) {
// Asking user if explanation is needed
if (ActivityCompat.shouldShowRequestPermissionRationale(this,
Manifest.permission.ACCESS_FINE_LOCATION)) {
// Show an explanation to the user *asynchronously* -- don't block
// this thread waiting for the user's response! After the user
// sees the explanation, try again to request the permission.
//Prompt the user once explanation has been shown
ActivityCompat.requestPermissions(this,
new String[] {
Manifest.permission.ACCESS_FINE_LOCATION
},
MY_PERMISSIONS_REQUEST_LOCATION);
} else {
// No explanation needed, we can request the permission.
ActivityCompat.requestPermissions(this,
new String[] {
Manifest.permission.ACCESS_FINE_LOCATION
},
MY_PERMISSIONS_REQUEST_LOCATION);
}
return false;
} else {
return true;
}
}
@Override
public void onRequestPermissionsResult(int requestCode,
String permissions[], int[] grantResults) {
switch (requestCode) {
case MY_PERMISSIONS_REQUEST_LOCATION:
{
// If request is cancelled, the result arrays are empty.
if (grantResults.length > 0 &&
grantResults[0] == PackageManager.PERMISSION_GRANTED) {
// permission was granted. Do the
// contacts-related task you need to do.
if (ContextCompat.checkSelfPermission(this,
Manifest.permission.ACCESS_FINE_LOCATION) ==
PackageManager.PERMISSION_GRANTED) {
if (mGoogleApiClient == null) {
buildGoogleApiClient();
}
mMap.setMyLocationEnabled(true);
}
} else {
// Permission denied, Disable the functionality that depends on this permission.
Toast.makeText(this, "permission denied", Toast.LENGTH_LONG).show();
}
return;
}
}
}
}
^
is the Python bitwise XOR operator. It is how you spell XOR
in python:
>>> 0 ^ 0
0
>>> 0 ^ 1
1
>>> 1 ^ 0
1
>>> 1 ^ 1
0
XOR stands for exclusive OR. It is used in cryptography because it let's you 'flip' the bits using a mask in a reversable operation:
>>> 10 ^ 5
15
>>> 15 ^ 5
10
where 5
is the mask; (input XOR mask) XOR mask gives you the input again.
sudo add-apt-repository ppa:deadsnakes
sudo apt-get update
sudo apt-get install python3.5 python3.5-tk
# or 2.7, 3.6 etc
# sudo apt-get install python2.7 python2.7-tk
# mouse_position.py
import Tkinter
p=Tkinter.Tk()
print(p.winfo_pointerxy()
Or with one-liner from the command line:
python -c "import Tkinter; p=Tkinter.Tk(); print(p.winfo_pointerxy())"
(1377, 379)
if not %1 == "" (
must be
if not "%1" == "" (
If an argument isn't given, it's completely empty, not even ""
(which represents an empty string in most programming languages). So we use the surrounding quotes to detect an empty argument.
From the Bjarne Stroustrup C++0x FAQ:
__cplusplus
In C++11 the macro
__cplusplus
will be set to a value that differs from (is greater than) the current199711L
.
Although this isn't as helpful as one would like. gcc
(apparently for nearly 10 years) had this value set to 1
, ruling out one major compiler, until it was fixed when gcc 4.7.0 came out.
These are the C++ standards and what value you should be able to expect in __cplusplus
:
__cplusplus
is 1
.__cplusplus
is 199711L
.__cplusplus
is 201103L
.__cplusplus
is 201402L
.__cplusplus
is 201703L
.If the compiler might be an older gcc
, we need to resort to compiler specific hackery (look at a version macro, compare it to a table with implemented features) or use Boost.Config (which provides relevant macros). The advantage of this is that we actually can pick specific features of the new standard, and write a workaround if the feature is missing. This is often preferred over a wholesale solution, as some compilers will claim to implement C++11, but only offer a subset of the features.
The Stdcxx Wiki hosts a comprehensive matrix for compiler support of C++0x features (archive.org link) (if you dare to check for the features yourself).
Unfortunately, more finely-grained checking for features (e.g. individual library functions like std::copy_if
) can only be done in the build system of your application (run code with the feature, check if it compiled and produced correct results - autoconf
is the tool of choice if taking this route).
I work myself this way
$mail->FromName = utf8_decode($_POST['name']);
I don't think there is a way to print array for you in printf. "printf" function has no idea how long your array is.
Instead of a button, put a link and navigate it to another page
<a href="logout.php">Logout</a>
Then in logout.php
page, use
session_start();
session_destroy();
header('Location: login.php');
exit;
The following solution should work quite well for what you are trying to do.
The JavaScript block is placed very late in the document so you don't have to worry about elements not existing.
You are setting a PHP variable at the top of the script and outputting just the value of the variable within the JavaScript block.
This way, you don't have to worry about escaping double-quotes or HEREDOCS (which is the recommended method if you REALLY must go there).
Javascript Embedding Example
<div id="helloContainer"><div>
<script type="text/javascript">
document.getElementById('helloContainer').innerHTML = '<?= $greeting; ?>';
</script>
import java.util.Scanner;
class Array {
public static void main(String a[]){
Scanner input = new Scanner(System.in);
System.out.println("Enter the size of an Array");
int num = input.nextInt();
System.out.println("Enter the Element "+num+" of an Array");
double[] numbers = new double[num];
for (int i = 0; i < numbers.length; i++)
{
System.out.println("Please enter number");
numbers[i] = input.nextDouble();
}
for (int i = 0; i < numbers.length; i++)
{
if ( (i%3) !=0){
System.out.print("");
System.out.print(numbers[i]+"\t");
} else {
System.out.println("");
System.out.print(numbers[i]+"\t");
}
}
}
Using Date object guarantees that. For eg if you try to create April 31st
:
new Date(2014,3,31) // Thu May 01 2014 00:00:00
Please note that it's zero indexed, so Jan. is
0
, Feb. is1
etc.
You just need to write the first query as a subquery (derived table), inside parentheses, pick an alias for it (t
below) and alias the columns as well.
The DISTINCT
can also be safely removed as the internal GROUP BY
makes it redundant:
SELECT DATE(`date`) AS `date` , COUNT(`player_name`) AS `player_count`
FROM (
SELECT MIN(`date`) AS `date`, `player_name`
FROM `player_playtime`
GROUP BY `player_name`
) AS t
GROUP BY DATE( `date`) DESC LIMIT 60 ;
Since the COUNT
is now obvious that is only counting rows of the derived table, you can replace it with COUNT(*)
and further simplify the query:
SELECT t.date , COUNT(*) AS player_count
FROM (
SELECT DATE(MIN(`date`)) AS date
FROM player_playtime
GROUP BY player_name
) AS t
GROUP BY t.date DESC LIMIT 60 ;
Client validation issues can occur because of MVC bug (even in MVC 5) in jquery.validate.unobtrusive.min.js which does not accept date/datetime format in any way. Unfortunately you have to solve it manually.
My finally working solution:
$(function () {
$.validator.methods.date = function (value, element) {
return this.optional(element) || moment(value, "DD.MM.YYYY", true).isValid();
}
});
You have to include before:
@Scripts.Render("~/Scripts/jquery-3.1.1.js")
@Scripts.Render("~/Scripts/jquery.validate.min.js")
@Scripts.Render("~/Scripts/jquery.validate.unobtrusive.min.js")
@Scripts.Render("~/Scripts/moment.js")
You can install moment.js using:
Install-Package Moment.js
It would be Better if you can use html5 video player or any other player (but not jwplayer) which can play youtube source video.
Below is an example source url of a video: https://redirector.googlevideo.com/videoplayback?requiressl=yes&id=a1385c04a9ecb45b&itag=22&source=picasa&cmo=secure_transport%3Dyes&ip=0.0.0.0&ipbits=0&expire=1440066674&sparams=requiressl%2Cid%2Citag%2Csource%2Cip%2Cipbits%2Cexpire&signature=86FE7D007A1DC990288890ED4EC7AA2D31A2ABF2.A0A23B872725261C457B67FD4757F3EB856AEE0E&key=lh1
Open this using simple html5 video player (Replace XXXXXX with source url or any downloadable url) :
<video width="640" height="480" autoplay controls>
<source src="XXXXXX" type="video/mp4">
</video>
You can also use many other video players also.
Just posted my finished code for a similar project. It copies files of certain extensions in my code its pdf tif and tiff you can change them to whatever you want copied or delete the if statements if you only need 1 or 2 types. When a file is created or modified it gets the archive attribute this code also looks for that attribute and only copies it if it exists and then removes it after its copied so you dont copy unneeded files. It also has a log setup in it so that you will see a log of what time and day evetrything was transfered from the last time you ran the script. Hope it helps! the link is Error: Object Required; 'objDIR' Code: 800A01A8
To color each cell based on its current integer value, the following should work, if you have a recent version of Excel. (Older versions don't handle rgb as well)
Sub Colourise()
'
' Colourise Macro
'
' Colours all selected cells, based on their current integer rgb value
' For e.g. (it's a bit backward from what you might expect)
' 255 = #ff0000 = red
' 256*255 = #00ff00 = green
' 256*256*255 #0000ff = blue
' 255 + 256*256*255 #ff00ff = magenta
' and so on...
'
' Keyboard Shortcut: Ctrl+Shift+C (or whatever you want to set it to)
'
For Each cell In Selection
If WorksheetFunction.IsNumber(cell) Then
cell.Interior.Color = cell.Value
End If
Next cell
End Sub
If instead of a number you have a string then you can split the string into three numbers and combine them using rgb().
Marius's answer worked perfectly for me:
df.reset_index() sets the index as the first column, with the column label "index." You can now use the index as an axis for plotting, as described in his answer:
monthly_mean.reset_index().plot(x='index', y='A')
However, this does not change the original dataframe. The original dataframe will be unchanged unless it is set using df = df.reset_index().
example:
df.reset_index()
print(df)
COF TSF PSF
3.0 0.946 0.914 0.966
4.0 0.963 0.940 0.976
6.0 0.978 0.965 0.987
8.0 0.989 0.984 0.995
10.0 1.000 1.000 1.000
12.0 1.004 1.013 1.009
15.0 1.013 1.026 1.012
17.0 1.019 1.037 1.017
20.0 1.024 1.045 1.020
25.0 1.030 1.057 1.026
30.0 1.034 1.065 1.030
35.0 1.037 1.069 1.031
40.0 1.037 1.068 1.030
60.0 1.037 1.068 1.030
df = df.reset_index()
print(df)
index COF TSF PSF
0 3.0 0.946 0.914 0.966
1 4.0 0.963 0.940 0.976
2 6.0 0.978 0.965 0.987
3 8.0 0.989 0.984 0.995
4 10.0 1.000 1.000 1.000
5 12.0 1.004 1.013 1.009
6 15.0 1.013 1.026 1.012
7 17.0 1.019 1.037 1.017
8 20.0 1.024 1.045 1.020
9 25.0 1.030 1.057 1.026
10 30.0 1.034 1.065 1.030
11 35.0 1.037 1.069 1.031
12 40.0 1.037 1.068 1.030
13 60.0 1.037 1.068 1.030
See: DataFrame.reset_index and DataFrame.set_index
You need use just simple code
<img alt="img" src="../assets/index.png" />
Do not forgot atribut alt in balise img
One practice case is when you are working with Bitbucket PR. There is PR open.
Then you decide to rebase the PR remote branch on the latest Master branch. This will change the commit's ids of your PR.
Then you want to add a new commit to the PR branch.
Since you have rebased the remote branch using GUI first you to sync the local branch on PC with the remote branch.
In this case git pull --rebase
works like magic.
After git pull --rebase
your remote branch and local branch has same history with same commit ids.
Now you can nicely push a new commit without using force or anything.
You can try open MVG library, It can be used for multiple interfaces too.
For me the database was not created and EF code first should have created it but always endet in this error. The same connection string was working in aspnet core default web project. The solution was to add
_dbContext.Database.EnsureCreated()
before the first database contact (before DB seeding).
In shell you assign to a variable without the dollar-sign:
TEST=`pwd`
echo $TEST
that's better (and can be nested) but is not as portable as the backtics:
TEST=$(pwd)
echo $TEST
Always remember: the dollar-sign is only used when reading a variable.
$mylabel.text( $mylabel.text().replace('-', '') );
Since text()
gets the value, and text( "someValue" )
sets the value, you just place one inside the other.
Would be the equivalent of doing:
var newValue = $mylabel.text().replace('-', '');
$mylabel.text( newValue );
EDIT:
I hope I understood the question correctly. I'm assuming $mylabel
is referencing a DOM element in a jQuery object, and the string is in the content of the element.
If the string is in some other variable not part of the DOM, then you would likely want to call the .replace()
function against that variable before you insert it into the DOM.
Like this:
var someVariable = "-123456";
$mylabel.text( someVariable.replace('-', '') );
or a more verbose version:
var someVariable = "-123456";
someVariable = someVariable.replace('-', '');
$mylabel.text( someVariable );
Those of you who work with google closure library, have at their disposal goog.array.removeDuplicates
, which is the same as unique. It changes the array itself, though.
Linq to sql has no support for Count(Distinct ...). You therefore have to map a .NET method in code onto a Sql server function (thus Count(distinct.. )) and use that.
btw, it doesn't help if you post pseudo code copied from a toolkit in a format that's neither VB.NET nor C#.
You could also use the .add()
function:
df.loc[:,'variance'] = df.loc[:,'budget'].add(df.loc[:,'actual'])
See this answer. val() is comparing a string, not a numeric value.
In the component's componentDidMount
lifecycle method, you can set an interval to call a function which updates the state.
componentDidMount() {
setInterval(() => this.setState({ time: Date.now()}), 1000)
}
That looks like unix file permissions modes to me (755
=rwxr-xr-x
, 644
=rw-r--r--
) - the old mode included the +x (executable) flag, the new mode doesn't.
This msysgit issue's replies suggests setting core.filemode to false in order to get rid of the issue:
git config core.filemode false
You need to execute a alter table statement for each table. The statement would follow this form:
ALTER TABLE tbl_name
[[DEFAULT] CHARACTER SET charset_name]
[COLLATE collation_name]
Now to get all the tables in the database you would need to execute the following query:
SELECT *
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_SCHEMA="YourDataBaseName"
AND TABLE_TYPE="BASE TABLE";
So now let MySQL write the code for you:
SELECT CONCAT("ALTER TABLE ", TABLE_SCHEMA, '.', TABLE_NAME," COLLATE your_collation_name_here;") AS ExecuteTheString
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_SCHEMA="YourDatabaseName"
AND TABLE_TYPE="BASE TABLE";
You can copy the results and execute them. I have not tested the syntax but you should be able to figure out the rest. Think of it as a little exercise.
Hope That Helps!
Double brackets accesses a list element, while a single bracket gives you back a list with a single element.
lst <- list('one','two','three')
a <- lst[1]
class(a)
## returns "list"
a <- lst[[1]]
class(a)
## returns "character"
Adding a 1px transparent border will trigger anti-aliasing
outline: 1px solid transparent;
Alternatively, add a 1px transparent box-shadow.
box-shadow: 0 0 1px rgba(255,255,255,0);
The OP is asking about whether it is possible to add an Attribute to an Entity class for a Unique Key. The short answer is that it IS possible, but not an out-of-the-box feature from the EF Core Team. If you'd like to use an Attribute to add Unique Keys to your Entity Framework Core entity classes, you can do what I've posted here
public class Company
{
[Required]
[DatabaseGenerated(DatabaseGeneratedOption.Identity)]
public Guid CompanyId { get; set; }
[Required]
[UniqueKey(groupId: "1", order: 0)]
[StringLength(100, MinimumLength = 1)]
public string CompanyName { get; set; }
[Required]
[UniqueKey(groupId: "1", order: 1)]
[StringLength(100, MinimumLength = 1)]
public string CompanyLocation { get; set; }
}
I was getting this error for another reason:
I accidentally had a blank list created in my __init__
which had the same name as a method I was trying to call (I had just finished refactoring a bit and the variable was no longer needed, but I missed it when cleaning up). So when I was instantiating the class and trying to call the method, it thought I was referencing the list object, not the method:
class DumbMistake:
def __init__(self, k, v):
self.k = k
self.v = v
self.update = []
def update(self):
// do updates to k, v, etc
if __name__ == '__main__':
DumbMistake().update('one,two,three', '1,2,3')
So it was trying to assign the two strings to self.update[] instead of calling the update() method. Removed the variable and it all worked as intended. Hope this helps someone.
The first step would be to add
position: 'absolute',
then if you want the element full width, add
left: 0,
right: 0,
then, if you want to put the element in the bottom, add
bottom: 0,
// don't need set top: 0
if you want to position the element at the top, replace bottom: 0
by top: 0
Um, shouldn't the destructor be calling delete, rather than delete[]?
Yes, use the rendered
attribute.
<h:form rendered="#{some boolean condition}">
You usually tie it to the model rather than letting the model grab the component and manipulate it.
E.g.
<h:form rendered="#{bean.booleanValue}" />
<h:form rendered="#{bean.intValue gt 10}" />
<h:form rendered="#{bean.objectValue eq null}" />
<h:form rendered="#{bean.stringValue ne 'someValue'}" />
<h:form rendered="#{not empty bean.collectionValue}" />
<h:form rendered="#{not bean.booleanValue and bean.intValue ne 0}" />
<h:form rendered="#{bean.enumValue eq 'ONE' or bean.enumValue eq 'TWO'}" />
Note the importance of keyword based EL operators such as gt
, ge
, le
and lt
instead of >
, >=
, <=
and <
as angle brackets <
and >
are reserved characters in XML. See also this related Q&A: Error parsing XHTML: The content of elements must consist of well-formed character data or markup.
As to your specific use case, let's assume that the link is passing a parameter like below:
<a href="page.xhtml?form=1">link</a>
You can then show the form as below:
<h:form rendered="#{param.form eq '1'}">
(the #{param}
is an implicit EL object referring to a Map
representing the request parameters)
Answer above is missing an example which might not be obvious (it wasn't to me).
Url could be broken down into parts
https://github.com/liufa/Tuplinator/commit/f36e3c5b3aba23a6c9cf7c01e7485028a23c3811
\_____/\________/ \_______________________________________/
| | |
Account name | Hash of revision
Project name
Hash can be found here (you can click it and will get the url from browser).
Hope this saves you some time.
as amber and sinan have noted above, the javascritp '.split' method will work just fine. Just pass it the string separator(-) and the string that you intend to split('123-abc-itchy-knee') and it will do the rest.
var coolVar = '123-abc-itchy-knee';
var coolVarParts = coolVar.split('-'); // this is an array containing the items
var1=coolVarParts[0]; //this will retrieve 123
To access each item from the array just use the respective index(indices start at zero).
Correction to above:
<img src="" id="image">
<input id="input" type="file" onchange="handleFiles()">
<script>
function handleFiles()
{
var filesToUpload = document.getElementById('input').files;
var file = filesToUpload[0];
// Create an image
var img = document.createElement("img");
// Create a file reader
var reader = new FileReader();
// Set the image once loaded into file reader
reader.onload = function(e)
{
img.src = e.target.result;
var canvas = document.createElement("canvas");
//var canvas = $("<canvas>", {"id":"testing"})[0];
var ctx = canvas.getContext("2d");
ctx.drawImage(img, 0, 0);
var MAX_WIDTH = 400;
var MAX_HEIGHT = 300;
var width = img.width;
var height = img.height;
if (width > height) {
if (width > MAX_WIDTH) {
height *= MAX_WIDTH / width;
width = MAX_WIDTH;
}
} else {
if (height > MAX_HEIGHT) {
width *= MAX_HEIGHT / height;
height = MAX_HEIGHT;
}
}
canvas.width = width;
canvas.height = height;
var ctx = canvas.getContext("2d");
ctx.drawImage(img, 0, 0, width, height);
var dataurl = canvas.toDataURL("image/png");
document.getElementById('image').src = dataurl;
}
// Load files into file reader
reader.readAsDataURL(file);
// Post the data
/*
var fd = new FormData();
fd.append("name", "some_filename.jpg");
fd.append("image", dataurl);
fd.append("info", "lah_de_dah");
*/
}</script>
Another simpler solution is to use this formula in the conditional formatting (apply to column A):
=COUNTIF(B:B,A1)
Regards!
You can use the dotenv package no matter what setup you use. It allows you to create a .env in your project root and specify your keys like so
REACT_APP_SERVER_PORT=8000
In your applications entry file your just call dotenv(); before accessing the keys like so
process.env.REACT_APP_SERVER_PORT
Looks like things have changed lately. In XCode 7.2 the following approach works:
override func viewDidLoad() {
super.viewDidLoad()
let swipeGesture = UISwipeGestureRecognizer(target: self, action: "handleSwipe:")
swipeGesture.direction = [.Down, .Up]
self.view.addGestureRecognizer(swipeGesture)
}
func handleSwipe(sender: UISwipeGestureRecognizer) {
print(sender.direction)
}
Tested in Simulator on iOS 8.4 and 9.2 and on actual device on 9.2.
Or, using mlcollard's handy extension here:
let swipeGesture = UISwipeGestureRecognizer() {
print("Gesture recognized !")
}
swipeGesture.direction = [.Down, .Up]
self.view.addGestureRecognizer(swipeGesture)
None of these worked for me, but using Heroku's built in tool did the trick.
heroku git:clone -a myapp
Documentation here: https://devcenter.heroku.com/articles/git-clone-heroku-app
$("#button_id").click(function(){ $("#detailInfo").html("WHAT YOU WANT") })
When using Redis, TTL can be set in properties file like this:
spring.cache.redis.time-to-live=1d # 1 day
spring.cache.redis.time-to-live=5m # 5 minutes
spring.cache.redis.time-to-live=10s # 10 seconds
# here database details
mysql_connect('hostname', 'username', 'password');
mysql_select_db('database-name');
$sql = "SELECT username FROM userregistraton";
$result = mysql_query($sql);
echo "<select name='username'>";
while ($row = mysql_fetch_array($result)) {
echo "<option value='" . $row['username'] ."'>" . $row['username'] ."</option>";
}
echo "</select>";
# here username is the column of my table(userregistration)
# it works perfectly
I guess things have changed in python 3.4. This worked for me:
print("resp:" + json.dumps(resp.json()))
It might be late but I just thought I should share for the case where you are required to do it manually (show working - haha) OR when you need all elements to appear as many times as possible or when you also need it to be unique.
Kindly note that tests have also been written for it.
from nose.tools import assert_equal
'''
Given two lists, print out the list of overlapping elements
'''
def overlap(l_a, l_b):
'''
compare the two lists l_a and l_b and return the overlapping
elements (intersecting) between the two
'''
#edge case is when they are the same lists
if l_a == l_b:
return [] #no overlapping elements
output = []
if len(l_a) == len(l_b):
for i in range(l_a): #same length so either one applies
if l_a[i] in l_b:
output.append(l_a[i])
#found all by now
#return output #if repetition does not matter
return list(set(output))
else:
#find the smallest and largest lists and go with that
sm = l_a if len(l_a) len(l_b) else l_b
for i in range(len(sm)):
if sm[i] in lg:
output.append(sm[i])
#return output #if repetition does not matter
return list(set(output))
## Test the Above Implementation
a = [1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89]
b = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13]
exp = [1, 2, 3, 5, 8, 13]
c = [4, 4, 5, 6]
d = [5, 7, 4, 8 ,6 ] #assuming it is not ordered
exp2 = [4, 5, 6]
class TestOverlap(object):
def test(self, sol):
t = sol(a, b)
assert_equal(t, exp)
print('Comparing the two lists produces')
print(t)
t = sol(c, d)
assert_equal(t, exp2)
print('Comparing the two lists produces')
print(t)
print('All Tests Passed!!')
t = TestOverlap()
t.test(overlap)
MongoDB is not magically faster. If you store the same data, organised in basically the same fashion, and access it exactly the same way, then you really shouldn't expect your results to be wildly different. After all, MySQL and MongoDB are both GPL, so if Mongo had some magically better IO code in it, then the MySQL team could just incorporate it into their codebase.
People are seeing real world MongoDB performance largely because MongoDB allows you to query in a different manner that is more sensible to your workload.
For example, consider a design that persisted a lot of information about a complicated entity in a normalised fashion. This could easily use dozens of tables in MySQL (or any relational db) to store the data in normal form, with many indexes needed to ensure relational integrity between tables.
Now consider the same design with a document store. If all of those related tables are subordinate to the main table (and they often are), then you might be able to model the data such that the entire entity is stored in a single document. In MongoDB you can store this as a single document, in a single collection. This is where MongoDB starts enabling superior performance.
In MongoDB, to retrieve the whole entity, you have to perform:
So a b-tree lookup, and a binary page read. Log(n) + 1 IOs. If the indexes can reside entirely in memory, then 1 IO.
In MySQL with 20 tables, you have to perform:
So the total for mysql, even assuming that all indexes are in memory (which is harder since there are 20 times more of them) is about 20 range lookups.
These range lookups are likely comprised of random IO — different tables will definitely reside in different spots on disk, and it's possible that different rows in the same range in the same table for an entity might not be contiguous (depending on how the entity has been updated, etc).
So for this example, the final tally is about 20 times more IO with MySQL per logical access, compared to MongoDB.
This is how MongoDB can boost performance in some use cases.
Mac Users
if you only want the last line deleted output without changing the file itself do
sed -e '$ d' foo.txt
if you want to delete the last line of the input file itself do
sed -i '' -e '$ d' foo.txt
Here is the SCSS (which could easily be converted to CSS):
$pFontSize: 18px;
p {
font-size: $pFontSize;
}
span{
font-weight: bold;
}
.x-overlay,
.x-emoji-overlay {
position: relative;
}
.x-overlay,
.x-emoji-overlay {
&:after {
position: absolute;
top: 0;
bottom: 0;
left: 0;
right: 0;
color: red;
text-align: center;
}
}
.x-overlay:after {
content: '\d7';
font-size: 3 * $pFontSize;
line-height: $pFontSize;
opacity: 0.7;
}
.x-emoji-overlay:after {
content: "\274c";
padding: 3px;
font-size: 1.5 * $pFontSize;
line-height: $pFontSize;
opacity: 0.5;
}
.strike {
position: relative;
display: inline-block;
}
.strike::before {
content: '';
border-bottom: 2px solid red;
width: 110%;
position: absolute;
left: -2px;
top: 46%;
}
.crossed-out {
/*inspired by https://www.tjvantoll.com/2013/09/12/building-custom-text-strikethroughs-with-css/*/
position: relative;
display: inline-block;
&::before,
&::after {
content: '';
width: 110%;
position: absolute;
left: -2px;
top: 45%;
opacity: 0.7;
}
&::before {
border-bottom: 2px solid red;
-webkit-transform: skewY(-20deg);
transform: skewY(-20deg);
}
&::after {
border-bottom: 2px solid red;
-webkit-transform: skewY(20deg);
transform: skewY(20deg);
}
}
As of now (Jan 2017 / Angular > 2.0) you can use the following:
changeBackground(): any {
return { 'background-color': this.color };
}
and
<div class="circle" [ngStyle]="changeBackground()">
<!-- <content></content> --> <!-- content is now deprecated -->
<ng-content><ng-content> <!-- Use ng-content instead -->
</div>
The shortest way is probably like this:
<div class="circle" [ngStyle]="{ 'background-color': color }">
<!-- <content></content> --> <!-- content is now deprecated -->
<ng-content><ng-content> <!-- Use ng-content instead -->
</div>
Kind of a mix:
Set it in your layout file :-
<CheckBox android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:text="new checkbox"
android:background="@drawable/checkbox_background"
android:button="@drawable/checkbox" />
where the @drawable/checkbox will look like:
<?xml version="1.0" encoding="utf-8"?>
<selector xmlns:android="http://schemas.android.com/apk/res/android">
<item android:state_checked="true" android:state_focused="true"
android:drawable="@drawable/checkbox_on_background_focus_yellow" />
<item android:state_checked="false" android:state_focused="true"
android:drawable="@drawable/checkbox_off_background_focus_yellow" />
<item android:state_checked="false"
android:drawable="@drawable/checkbox_off_background" />
<item android:state_checked="true"
android:drawable="@drawable/checkbox_on_background" />
</selector>
A subtle alternative to MaxNoe's answer where you aren't explicitly setting the ticks but instead setting the cadence.
import matplotlib.pyplot as plt
from matplotlib.ticker import (AutoMinorLocator, MultipleLocator)
fig, ax = plt.subplots(figsize=(10, 8))
# Set axis ranges; by default this will put major ticks every 25.
ax.set_xlim(0, 200)
ax.set_ylim(0, 200)
# Change major ticks to show every 20.
ax.xaxis.set_major_locator(MultipleLocator(20))
ax.yaxis.set_major_locator(MultipleLocator(20))
# Change minor ticks to show every 5. (20/4 = 5)
ax.xaxis.set_minor_locator(AutoMinorLocator(4))
ax.yaxis.set_minor_locator(AutoMinorLocator(4))
# Turn grid on for both major and minor ticks and style minor slightly
# differently.
ax.grid(which='major', color='#CCCCCC', linestyle='--')
ax.grid(which='minor', color='#CCCCCC', linestyle=':')
You can define two entry points in your webpack configuration, one for your normal js and the other one for minified js. Then you should output your bundle with its name, and configure UglifyJS plugin to include min.js files. See the example webpack configuration for more details:
module.exports = {
entry: {
'bundle': './src/index.js',
'bundle.min': './src/index.js',
},
output: {
path: path.resolve(__dirname, 'dist'),
filename: "[name].js"
},
plugins: [
new webpack.optimize.UglifyJsPlugin({
include: /\.min\.js$/,
minimize: true
})
]
};
After running webpack, you will get bundle.js and bundle.min.js in your dist folder, no need for extra plugin.
On local server your following query will work
DELIMITER |
CREATE PROCEDURE sample_sp_with_params (IN empId INT UNSIGNED, OUT oldName VARCHAR(20), INOUT newName VARCHAR(20))
BEGIN
SELECT `first name` into oldName FROM emp where id = empId;
UPDATE emp SET `first name`= newName where id = empId;
END
|
DELIMITER ;
but on production server it might not work. depend on mysql version you are using. I had a same problem on powweb server, i removed delimiter and begin keywords, it works fine. have a look at following query
CREATE PROCEDURE adminsections( IN adminId INT UNSIGNED ) SELECT tbl_adminusersection.ads_name, tbl_adminusersection.ads_controller FROM tbl_adminusersectionright LEFT JOIN tbl_adminusersection ON ( tbl_adminusersectionright.adsr_ads_id = tbl_adminusersection.ads_id ) LEFT JOIN tbl_adminusers ON ( tbl_adminusersectionright.adsr_adusr_id = tbl_adminusers.admusr_id ) WHERE tbl_adminusers.admusr_id = adminId;
More of a comment link for suggested further reading...A really good blog article which benchmarks various ways of accomplishing this task can be found here.
They use a few techniques: "Insert Where Not Exists", "Merge" statement, "Insert Except", and your typical "left join" to see which way is the fastest to accomplish this task.
The example code used for each technique is as follows (straight copy/paste from their page) :
INSERT INTO #table1 (Id, guidd, TimeAdded, ExtraData)
SELECT Id, guidd, TimeAdded, ExtraData
FROM #table2
WHERE NOT EXISTS (Select Id, guidd From #table1 WHERE #table1.id = #table2.id)
-----------------------------------
MERGE #table1 as [Target]
USING (select Id, guidd, TimeAdded, ExtraData from #table2) as [Source]
(id, guidd, TimeAdded, ExtraData)
on [Target].id =[Source].id
WHEN NOT MATCHED THEN
INSERT (id, guidd, TimeAdded, ExtraData)
VALUES ([Source].id, [Source].guidd, [Source].TimeAdded, [Source].ExtraData);
------------------------------
INSERT INTO #table1 (id, guidd, TimeAdded, ExtraData)
SELECT id, guidd, TimeAdded, ExtraData from #table2
EXCEPT
SELECT id, guidd, TimeAdded, ExtraData from #table1
------------------------------
INSERT INTO #table1 (id, guidd, TimeAdded, ExtraData)
SELECT #table2.id, #table2.guidd, #table2.TimeAdded, #table2.ExtraData
FROM #table2
LEFT JOIN #table1 on #table1.id = #table2.id
WHERE #table1.id is null
It's a good read for those who are looking for speed! On SQL 2014, the Insert-Except method turned out to be the fastest for 50 million or more records.
you can use html entity as •
With PowerShell 5.1 in Windows 10 you can use:
Get-SmbMapping | Remove-SmbMapping -Confirm:$false
POJO stands for Plain Old Java Object, and would be used to describe the same things as a "Normal Class" whereas a JavaBean follows a set of rules. Most commonly Beans use getters and setters to protect their member variables, which are typically set to private and have a no-argument public constructor. Wikipedia has a pretty good rundown of JavaBeans: http://en.wikipedia.org/wiki/JavaBeans
POJO is usually used to describe a class that doesn't need to be a subclass of anything, or implement specific interfaces, or follow a specific pattern.
Yes, when you invoke e.extractAll(foo)
, Python munges that into extractAll(e, foo)
.
From http://docs.python.org/tutorial/classes.html
the special thing about methods is that the object is passed as the first argument of the function. In our example, the call x.f() is exactly equivalent to MyClass.f(x). In general, calling a method with a list of n arguments is equivalent to calling the corresponding function with an argument list that is created by inserting the method’s object before the first argument.
Emphasis added.
just building on what Chetabahana wrote, I found that adding a short delay to the JS function helped on a site I was working on. It meant that the function kicked in after the iframe loaded. You can play around with the delay.
var delayInMilliseconds = 500; // half a second
setTimeout(function() {
var iframe = document.getElementsByTagName('iframe')[0];
iframe.style.background = 'white';
iframe.contentWindow.document.body.style.backgroundColor = 'white';
}, delayInMilliseconds);
I hope this helps!
You have to retrieve it from the HOST
header.
var host = req.get('host');
It is optional with HTTP 1.0, but required by 1.1. And, the app can always impose a requirement of its own.
If this is for supporting cross-origin requests, you would instead use the Origin
header.
var origin = req.get('origin');
Note that some cross-origin requests require validation through a "preflight" request:
req.options('/route', function (req, res) {
var origin = req.get('origin');
// ...
});
If you're looking for the client's IP, you can retrieve that with:
var userIP = req.socket.remoteAddress;
Note that, if your server is behind a proxy, this will likely give you the proxy's IP. Whether you can get the user's IP depends on what info the proxy passes along. But, it'll typically be in the headers as well.
In general, there is no way to know when something on another site has been changed. If the site offers an RSS feed, you should try that. If the site does not offer an RSS feed (or if the RSS feed doesn't include the information you're looking for), then you have to scrape and compare.
If you use .NET as your middle tier, check the route attribute clearly, for example,
I had issue when it was like this,
[Route("something/{somethingLong: long}")] //Space.
Fixed it by this,
[Route("something/{somethingLong:long}")] //No space
Things like these are why I switched to Powershell. Try it out, it's fun:
Get-ChildItem -Recurse -Include *.doc | % {
Copy-Item $_.FullName -destination x:\destination
}
Currently there is no way to precreate an SQLite database to ship with your apk. The best you can do is save the appropriate SQL as a resource and run them from your application. Yes, this leads to duplication of data (same information exists as a resrouce and as a database) but there is no other way right now. The only mitigating factor is the apk file is compressed. My experience is 908KB compresses to less than 268KB.
The thread below has the best discussion/solution I have found with good sample code.
http://groups.google.com/group/android-developers/msg/9f455ae93a1cf152
I stored my CREATE statement as a string resource to be read with Context.getString() and ran it with SQLiteDatabse.execSQL().
I stored the data for my inserts in res/raw/inserts.sql (I created the sql file, 7000+ lines). Using the technique from the link above I entered a loop, read the file line by line and concactenated the data onto "INSERT INTO tbl VALUE " and did another SQLiteDatabase.execSQL(). No sense in saving 7000 "INSERT INTO tbl VALUE "s when they can just be concactenated on.
It takes about twenty seconds on the emulator, I do not know how long this would take on a real phone, but it only happens once, when the user first starts the application.
Get the content of the JSON file using file_get_contents()
:
$str = file_get_contents('http://example.com/example.json/');
Now decode the JSON using json_decode()
:
$json = json_decode($str, true); // decode the JSON into an associative array
You have an associative array containing all the information. To figure out how to access the values you need, you can do the following:
echo '<pre>' . print_r($json, true) . '</pre>';
This will print out the contents of the array in a nice readable format. Note that the second parameter is set to true
in order to let print_r()
know that the output should be returned (rather than just printed to screen). Then, you access the elements you want, like so:
$temperatureMin = $json['daily']['data'][0]['temperatureMin'];
$temperatureMax = $json['daily']['data'][0]['temperatureMax'];
Or loop through the array however you wish:
foreach ($json['daily']['data'] as $field => $value) {
// Use $field and $value here
}
"return" does exit the function but if you want to return large sums of data, you can store it in an array and then return it instead of trying to returning each piece of data 1 by 1 in the loop.
* {
font-size: 100%;
font-family: Arial;
}
The asterisk implies all elements.
Using the trick
Attribute VB_PredeclaredId = True
I found another more compact way:
Option Explicit
Option Base 0
Option Compare Binary
Private v_cBox As ComboBox
'
' Class creaor
Public Function New_(ByRef cBox As ComboBox) As ComboBoxExt_c
If Me Is ComboBoxExt_c Then
Set New_ = New ComboBoxExt_c
Call New_.New_(cBox)
Else
Set v_cBox = cBox
End If
End Function
As you can see the New_ constructor is called to both create and set the private members of the class (like init) only problem is, if called on the non-static instance it will re-initialize the private member. but that can be avoided by setting a flag.
If this function is in a module/class, you could just write them outside of the function, so it has Global Scope
. Global Scope means the variable can be accessed by another function in the same module/class (if you use dim
as declaration statement, use public
if you want the variables can be accessed by all function in all modules) :
Dim iRaw As Integer
Dim iColumn As Integer
Function find_results_idle()
iRaw = 1
iColumn = 1
End Function
Function this_can_access_global()
iRaw = 2
iColumn = 2
End Function
The pyplot functions you are calling, axhline()
and axvline()
draw lines that span a portion of the axis range, regardless of coordinates. The parameters xmin
or ymin
use value 0.0 as the minimum of the axis and 1.0 as the maximum of the axis.
Instead, use plt.plot((x1, x2), (y1, y2), 'k-')
to draw a line from the point (x1, y1) to the point (x2, y2) in color k. See pyplot.plot
.
function removeParam(parameter)
{
var url=document.location.href;
var urlparts= url.split('?');
if (urlparts.length>=2)
{
var urlBase=urlparts.shift();
var queryString=urlparts.join("?");
var prefix = encodeURIComponent(parameter)+'=';
var pars = queryString.split(/[&;]/g);
for (var i= pars.length; i-->0;)
if (pars[i].lastIndexOf(prefix, 0)!==-1)
pars.splice(i, 1);
url = urlBase+'?'+pars.join('&');
window.history.pushState('',document.title,url); // added this line to push the new url directly to url bar .
}
return url;
}
This will resolve your problem
This only worked right for me when including strip.white = TRUE
in the read.csv
command.
(I found the solution here.)
Use FileSaver.js
. It supports Chrome, Edge, Firefox, and IE 10+ (and probably IE < 10 with a few "polyfills" - see Note 4). FileSaver.js
implements the saveAs() FileSaver interface in browsers that do not natively support it:
https://github.com/eligrey/FileSaver.js
Minified version is really small at < 2.5KB, gzipped < 1.2KB.
Usage:
/* TODO: replace the blob content with your byte[] */
var blob = new Blob([yourBinaryDataAsAnArrayOrAsAString], {type: "application/octet-stream"});
var fileName = "myFileName.myExtension";
saveAs(blob, fileName);
You might need Blob.js in some browsers (see Note 3). Blob.js implements the W3C Blob interface in browsers that do not natively support it. It is a cross-browser implementation:
https://github.com/eligrey/Blob.js
Consider StreamSaver.js if you have files larger than blob's size limitations.
Complete example:
/* Two options_x000D_
* 1. Get FileSaver.js from here_x000D_
* https://github.com/eligrey/FileSaver.js/blob/master/FileSaver.min.js -->_x000D_
* <script src="FileSaver.min.js" />_x000D_
*_x000D_
* Or_x000D_
*_x000D_
* 2. If you want to support only modern browsers like Chrome, Edge, Firefox, etc., _x000D_
* then a simple implementation of saveAs function can be:_x000D_
*/_x000D_
function saveAs(blob, fileName) {_x000D_
var url = window.URL.createObjectURL(blob);_x000D_
_x000D_
var anchorElem = document.createElement("a");_x000D_
anchorElem.style = "display: none";_x000D_
anchorElem.href = url;_x000D_
anchorElem.download = fileName;_x000D_
_x000D_
document.body.appendChild(anchorElem);_x000D_
anchorElem.click();_x000D_
_x000D_
document.body.removeChild(anchorElem);_x000D_
_x000D_
// On Edge, revokeObjectURL should be called only after_x000D_
// a.click() has completed, atleast on EdgeHTML 15.15048_x000D_
setTimeout(function() {_x000D_
window.URL.revokeObjectURL(url);_x000D_
}, 1000);_x000D_
}_x000D_
_x000D_
(function() {_x000D_
// convert base64 string to byte array_x000D_
var byteCharacters = atob("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");_x000D_
var byteNumbers = new Array(byteCharacters.length);_x000D_
for (var i = 0; i < byteCharacters.length; i++) {_x000D_
byteNumbers[i] = byteCharacters.charCodeAt(i);_x000D_
}_x000D_
var byteArray = new Uint8Array(byteNumbers);_x000D_
_x000D_
// now that we have the byte array, construct the blob from it_x000D_
var blob1 = new Blob([byteArray], {type: "application/octet-stream"});_x000D_
_x000D_
var fileName1 = "cool.gif";_x000D_
saveAs(blob1, fileName1);_x000D_
_x000D_
// saving text file_x000D_
var blob2 = new Blob(["cool"], {type: "text/plain"});_x000D_
var fileName2 = "cool.txt";_x000D_
saveAs(blob2, fileName2);_x000D_
})();
_x000D_
Tested on Chrome, Edge, Firefox, and IE 11 (use FileSaver.js
for supporting IE 11).
You can also save from a canvas
element. See https://github.com/eligrey/FileSaver.js#saving-a-canvas.
Demos: https://eligrey.com/demos/FileSaver.js/
Blog post by author of FileSaver.js
: http://eligrey.com/blog/post/saving-generated-files-on-the-client-side
Note 1: Browser support: https://github.com/eligrey/FileSaver.js#supported-browsers
Note 2: Failed to execute 'atob' on 'Window'
Note 3: Polyfill for browsers not supporting Blob: https://github.com/eligrey/Blob.js
See http://caniuse.com/#search=blob
Note 4: IE < 10 support (I've not tested this part):
https://github.com/eligrey/FileSaver.js#ie--10
https://github.com/eligrey/FileSaver.js/issues/56#issuecomment-30917476
Downloadify is a Flash-based polyfill for supporting IE6-9: https://github.com/dcneiner/downloadify (I don't recommend Flash-based solutions in general, though.)
Demo using Downloadify and FileSaver.js for supporting IE6-9 also: http://sheetjs.com/demos/table.html
Note 5: Creating a BLOB from a Base64 string in JavaScript
Note 6: FileSaver.js
examples: https://github.com/eligrey/FileSaver.js#examples
This is described here: https://yarnpkg.com/en/docs/cli/add#toc-adding-dependencies
For example:
yarn add https://github.com/novnc/noVNC.git#0613d18
One pitfall I fell into is there is no password field now, it has been renamed so:
update user set password=PASSWORD("YOURPASSWORDHERE") where user='root';
Should now be:
update user set authentication_string=password('YOURPASSWORDHERE') where user='root';
What does it mean?
That means that each iterator you obtain from a ConcurrentHashMap
is designed to be used by a single thread and should not be passed around. This includes the syntactic sugar that the for-each loop provides.
What happens if I try to iterate the map with two threads at the same time?
It will work as expected if each of the threads uses it's own iterator.
What happens if I put or remove a value from the map while iterating it?
It is guaranteed that things will not break if you do this (that's part of what the "concurrent" in ConcurrentHashMap
means). However, there is no guarantee that one thread will see the changes to the map that the other thread performs (without obtaining a new iterator from the map). The iterator is guaranteed to reflect the state of the map at the time of it's creation. Futher changes may be reflected in the iterator, but they do not have to be.
In conclusion, a statement like
for (Object o : someConcurrentHashMap.entrySet()) {
// ...
}
will be fine (or at least safe) almost every time you see it.
.MERGE_MSG.swp is open in your git, you just need to delete this .swp file. In my case I used following command and it worked fine.
rm .MERGE_MSG.swp
<?php
$Words = array("hello","there","world");
$c = 0;
$message = 'Hi hello';
foreach ($Words as $word):
$trial = stripos($message,$word);
if($trial != true){
$c++;
echo 'Word '.$c.' didnt match <br> <br>';
}else{
$c++;
echo 'Word '.$c.' matched <br> <br>';
}
endforeach;
?>
I used this kind of code to check for hello, It also Has a numbering feature. You can use this if you want to do content moderation practices in websites that need the user to type
To get exact character count of string, use printf, as opposed to echo, cat, or running wc -c directly on a file, because using echo, cat, etc will count a newline character, which will give you the amount of characters including the newline character. So a file with the text 'hello' will print 6 if you use echo etc, but if you use printf it will return the exact 5, because theres no newline element to count.
How to use printf for counting characters within strings:
$printf '6chars' | wc -m
6
To turn this into a script you can run on a text file to count characters, save the following in a file called print-character-amount.sh:
#!/bin/bash
characters=$(cat "$1")
printf "$characters" | wc -m
chmod +x on file print-character-amount.sh containing above text, place the file in your PATH (i.e. /usr/bin/ or any directory exported as PATH in your .bashrc file) then to run script on text file type:
print-character-amount.sh file-to-count-characters-of.txt
The first thing you need to do is to set the level of verification. Such levels is not so much:
Although the method setHostnameVerifier() is obsolete for new library apache, but for version in Android SDK is normal.
And so we take ALLOW_ALL_HOSTNAME_VERIFIER
and set it in the method factory SSLSocketFactory.setHostnameVerifier()
.
Next, You need set our factory for the protocol to https. To do this, simply call the SchemeRegistry.register()
method.
Then you need to create a DefaultHttpClient
with SingleClientConnManager
.
Also in the code below you can see that on default will also use our flag (ALLOW_ALL_HOSTNAME_VERIFIER
) by the method HttpsURLConnection.setDefaultHostnameVerifier()
Below code works for me:
HostnameVerifier hostnameVerifier = org.apache.http.conn.ssl.SSLSocketFactory.ALLOW_ALL_HOSTNAME_VERIFIER;
DefaultHttpClient client = new DefaultHttpClient();
SchemeRegistry registry = new SchemeRegistry();
SSLSocketFactory socketFactory = SSLSocketFactory.getSocketFactory();
socketFactory.setHostnameVerifier((X509HostnameVerifier) hostnameVerifier);
registry.register(new Scheme("https", socketFactory, 443));
SingleClientConnManager mgr = new SingleClientConnManager(client.getParams(), registry);
DefaultHttpClient httpClient = new DefaultHttpClient(mgr, client.getParams());
// Set verifier
HttpsURLConnection.setDefaultHostnameVerifier(hostnameVerifier);
// Example send http request
final String url = "https://encrypted.google.com/";
HttpPost httpPost = new HttpPost(url);
HttpResponse response = httpClient.execute(httpPost);
There is some news based on Mozilla Foundation, and sitepoint
Do not use this value (
http-equiv=content-type
) as it is obsolete. Prefer thecharset
attribute on the <meta
> element.
Using your example, you could do:
public void doit(A a) {
if(a instanceof B) {
// needs to cast to B to access draw2 which isn't present in A
// note that this is probably not a good OO-design, but that would
// be out-of-scope for this discussion :)
((B)a).draw2();
}
a.draw();
}
This could help: http://finance.yahoo.com/d/quotes.csv?e=.csv&f=c4l1&s=EURUSD=X,GBPUSD=X It will return csv file:
"EUR",1.2972
"GBP",1.6034
Or if you need json: Yahoo csv parser
^
for start of the string pattern,
?
for allowing 0 or 1 time repeat. ie., s?
s can exist 1 time or no need to exist at all.
/
is a special character in regex so it needs to be escaped by a backslash \/
/^https?:\/\//.test('https://www.bbc.co.uk/sport/cricket'); // true
/^https?:\/\//.test('http://www.bbc.co.uk/sport/cricket'); // true
/^https?:\/\//.test('ftp://www.bbc.co.uk/sport/cricket'); // false
You have an option to define collation order at the time of defining your table. If you define a case-sensitive order, your LIKE
operator will behave in a case-sensitive way; if you define a case-insensitive collation order, the LIKE
operator will ignore character case as well:
CREATE TABLE Test (
CI_Str VARCHAR(15) COLLATE Latin1_General_CI_AS -- Case-insensitive
, CS_Str VARCHAR(15) COLLATE Latin1_General_CS_AS -- Case-sensitive
);
Here is a quick demo on sqlfiddle showing the results of collation order on searches with LIKE
.
see sp_who it gives you more details than just seeing the number of connections
in your case i would do something like this
DECLARE @temp TABLE(spid int , ecid int, status varchar(50),
loginname varchar(50),
hostname varchar(50),
blk varchar(50), dbname varchar(50), cmd varchar(50), request_id int)
INSERT INTO @temp
EXEC sp_who
SELECT COUNT(*) FROM @temp WHERE dbname = 'DB NAME'
This is a more general answer meant to be a quick reference for future viewers.
Example
SQLiteDatabase db = helper.getReadableDatabase();
String table = "table2";
String[] columns = {"column1", "column3"};
String selection = "column3 =?";
String[] selectionArgs = {"apple"};
String groupBy = null;
String having = null;
String orderBy = "column3 DESC";
String limit = "10";
Cursor cursor = db.query(table, columns, selection, selectionArgs, groupBy, having, orderBy, limit);
Explanation from the documentation
table
String: The table name to compile the query against.columns
String: A list of which columns to return. Passing null will return all columns, which is discouraged to prevent reading data from storage that isn't going to be used.selection
String: A filter declaring which rows to return, formatted as an SQL WHERE clause (excluding the WHERE itself). Passing null will return all rows for the given table.selectionArgs
String: You may include ?s in selection, which will be replaced by the values from selectionArgs, in order that they appear in the selection. The values will be bound as Strings.groupBy
String: A filter declaring how to group rows, formatted as an SQL GROUP BY clause (excluding the GROUP BY itself). Passing null will cause the rows to not be grouped.having
String: A filter declare which row groups to include in the cursor, if row grouping is being used, formatted as an SQL HAVING clause (excluding the HAVING itself). Passing null will cause all row groups to be included, and is required when row grouping is not being used.orderBy
String: How to order the rows, formatted as an SQL ORDER BY clause (excluding the ORDER BY itself). Passing null will use the default sort order, which may be unordered.limit
String: Limits the number of rows returned by the query, formatted as LIMIT clause. Passing null denotes no LIMIT clause.
Use a bytearray
:
>>> frame = bytearray()
>>> frame.append(0xA2)
>>> frame.append(0x01)
>>> frame.append(0x02)
>>> frame.append(0x03)
>>> frame.append(0x04)
>>> frame
bytearray(b'\xa2\x01\x02\x03\x04')
or, using your code but fixing the errors:
frame = b""
frame += b'\xA2'
frame += b'\x01'
frame += b'\x02'
frame += b'\x03'
frame += b'\x04'
To toggle a checkbox or you can use
element.checked = !element.checked;
so you could use
if (attribute == elementName)
{
arrChecks[i].checked = !arrChecks[i].checked;
} else {
arrChecks[i].checked = false;
}
At the time of writing this, the current version of Tomcat 7 (7.0.41) has a built-in CORS filter http://tomcat.apache.org/tomcat-7.0-doc/config/filter.html#CORS_Filter
You could get a JavaScript object containing the parameters with something like this:
var regex = /[?&]([^=#]+)=([^&#]*)/g,
url = window.location.href,
params = {},
match;
while(match = regex.exec(url)) {
params[match[1]] = match[2];
}
The regular expression could quite likely be improved. It simply looks for name-value pairs, separated by =
characters, and pairs themselves separated by &
characters (or an =
character for the first one). For your example, the above would result in:
{v: "123", p: "hello"}
Here's a working example.
create directive with this code:
$scope.$watch($http.pendingRequests, toggleLoader);
function toggleLoader(status){
if(status.length){
element.addClass('active');
} else {
element.removeClass('active');
}
}
After reading all answers I was surprised no one mentioned this excellent package:
Elaborating a bit on its README, here are the reason why we chose it at work:
- It can deep or shallow copy
- In deep cloning all object graph is maintained.
- Uses code-generation in runtime, as result cloning is blazingly fast
- Objects copied by internal structure, no methods or ctors called
- You don't need to mark classes somehow (like Serializable-attribute, or implement interfaces)
- No requirement to specify object type for cloning. Object can be casted to interface or as an abstract object (e.g. you can clone array of ints as abstract Array or IEnumerable; even null can be cloned without any errors)
- Cloned object doesn't have any ability to determine that he is clone (except with very specific methods)
var deepClone = new { Id = 1, Name = "222" }.DeepClone();
var shallowClone = new { Id = 1, Name = "222" }.ShallowClone();
The README contains a performance comparison of various cloning libraries and methods: DeepCloner Performance.
Remember that
log(n!) = log(1) + log(2) + ... + log(n-1) + log(n)
You can get the upper bound by
log(1) + log(2) + ... + log(n) <= log(n) + log(n) + ... + log(n)
= n*log(n)
And you can get the lower bound by doing a similar thing after throwing away the first half of the sum:
log(1) + ... + log(n/2) + ... + log(n) >= log(n/2) + ... + log(n)
= log(n/2) + log(n/2+1) + ... + log(n-1) + log(n)
>= log(n/2) + ... + log(n/2)
= n/2 * log(n/2)
The example in Liam's answer saves the file as string in a single line. I prefer to add formatting. Someone in the future may want to change some value manually in the file. If you add formatting it's easier to do so.
The following adds basic JSON indentation:
string json = JsonConvert.SerializeObject(_data.ToArray(), Formatting.Indented);
Character.getNumericValue(c)
The java.lang.Character.getNumericValue(char ch)
returns the int
value that the specified Unicode character represents. For example, the character '\u216C'
(the roman numeral fifty) will return an int with a value of 50.
The letters A-Z in their uppercase ('\u0041' through '\u005A')
, lowercase ('\u0061' through '\u007A')
, and full width variant ('\uFF21' through '\uFF3A' and '\uFF41' through '\uFF5A')
forms have numeric values from 10 through 35. This is independent of the Unicode specification, which does not assign numeric values to these char values.
This method returns the numeric value of the character, as a nonnegative int value;
-2 if the character has a numeric value that is not a nonnegative integer;
-1 if the character has no numeric value.
And here is the link.
Gearoid Murphy's solution works like a charm. For me I had two directories for cuda -
/usr/local/cuda
/usr/local/cuda-5.0
The soft links had to be added only to the directory mentioned below -
/usr/local/cuda
Also, both g++ and gcc soft links were required as mentioned by SchighSchagh.
On the ASP.NET page, inside the form tags.
The debug
module can be used to analyze variables. Be careful running the following command. In our setup it generates 444709 lines with 16MB:
ansible -m debug -a 'var=hostvars' localhost
I am not sure but it might be necessary to enable facts caching.
If you need just one host use the host name as a key for the hostvars
hash:
ansible -m debug -a 'var=hostvars.localhost' localhost
I'd suggest avoiding in-line JavaScript:
var aElems = document.getElementsByTagName('a');
for (var i = 0, len = aElems.length; i < len; i++) {
aElems[i].onclick = function() {
var check = confirm("Are you sure you want to leave?");
if (check == true) {
return true;
}
else {
return false;
}
};
}?
The above updated to reduce space, though maintaining clarity/function:
var aElems = document.getElementsByTagName('a');
for (var i = 0, len = aElems.length; i < len; i++) {
aElems[i].onclick = function() {
return confirm("Are you sure you want to leave?");
};
}
A somewhat belated update, to use addEventListener()
(as suggested, by bažmegakapa, in the comments below):
function reallySure (event) {
var message = 'Are you sure about that?';
action = confirm(message) ? true : event.preventDefault();
}
var aElems = document.getElementsByTagName('a');
for (var i = 0, len = aElems.length; i < len; i++) {
aElems[i].addEventListener('click', reallySure);
}
The above binds a function to the event of each individual link; which is potentially quite wasteful, when you could bind the event-handling (using delegation) to an ancestor element, such as the following:
function reallySure (event) {
var message = 'Are you sure about that?';
action = confirm(message) ? true : event.preventDefault();
}
function actionToFunction (event) {
switch (event.target.tagName.toLowerCase()) {
case 'a' :
reallySure(event);
break;
default:
break;
}
}
document.body.addEventListener('click', actionToFunction);
Because the event-handling is attached to the body
element, which normally contains a host of other, clickable, elements I've used an interim function (actionToFunction
) to determine what to do with that click. If the clicked element is a link, and therefore has a tagName
of a
, the click-handling is passed to the reallySure()
function.
References:
Got this solved using Webpack 2 :
resolve: {
extensions: ['', '.js'],
modules: [__dirname , 'node_modules']
}
You can't get the text after the hash mark. It is not sent to the server in a request.
Problem is that your folder is not identified as a Source folder.
You can simplify Joe Kington's code using the ax
parameter of figure.colorbar()
with a list of axes.
From the documentation:
ax
None | parent axes object(s) from which space for a new colorbar axes will be stolen. If a list of axes is given they will all be resized to make room for the colorbar axes.
import numpy as np
import matplotlib.pyplot as plt
fig, axes = plt.subplots(nrows=2, ncols=2)
for ax in axes.flat:
im = ax.imshow(np.random.random((10,10)), vmin=0, vmax=1)
fig.colorbar(im, ax=axes.ravel().tolist())
plt.show()
Use this following code:
let intVal=56
let floatval:Double=56.897898
let doubleValue=89.0
let explicitDaouble:Double=89.56
let stringValue:"Hello"
let stringValue="String:\(stringValue) Integer:\(intVal) Float:\(floatval) Double:\(doubleValue) ExplicitDouble:\(explicitDaouble) "
For me, the reason for not starting turned out to be an orphaned lock file at /var/lib/mongo/mongo.lock When I deleted that file, mongo would then start up OK. My system had had some messy crashes prior to this. [Fedora 14]
The solution I opted for was to format the date with the mysql query :
String l_mysqlQuery = "SELECT DATE_FORMAT(time, '%Y-%m-%d %H:%i:%s') FROM uld_departure;"
l_importedTable = fStatement.executeQuery( l_mysqlQuery );
System.out.println(l_importedTable.getString( timeIndex));
I had the exact same issue.
Even though my mysql table contains dates formatted as such : 2017-01-01 21:02:50
String l_mysqlQuery = "SELECT time FROM uld_departure;"
l_importedTable = fStatement.executeQuery( l_mysqlQuery );
System.out.println(l_importedTable.getString( timeIndex));
was returning a date formatted as such :
2017-01-01 21:02:50.0
NODE_ENV
is an environment variable made popular by the express web server framework. When a node application is run, it can check the value of the environment variable and do different things based on the value. NODE_ENV
specifically is used (by convention) to state whether a particular environment is a production or a development environment. A common use-case is running additional debugging or logging code if running in a development environment.
You can use the following code to access the environment variable yourself so that you can perform your own checks and logic:
var environment = process.env.NODE_ENV
Assume production if you don't recognise the value:
var isDevelopment = environment === 'development'
if (isDevelopment) {
setUpMoreVerboseLogging()
}
You can alternatively using express' app.get('env')
function, but note that this is NOT RECOMMENDED as it defaults to "development"
, which may result in development code being accidentally run in a production environment - it's much safer if your app throws an error if this important value is not set (or if preferred, defaults to production logic as above).
Be aware that if you haven't explicitly set NODE_ENV
for your environment, it will be undefined
if you access it from process.env
, there is no default.
How to actually set the environment variable varies from operating system to operating system, and also depends on your user setup.
If you want to set the environment variable as a one-off, you can do so from the command line:
export NODE_ENV=production
$env:NODE_ENV = 'production'
In the long term, you should persist this so that it isn't unset if you reboot - rather than list all the possible methods to do this, I'll let you search how to do that yourself!
Convention has dictated that there are two 'main' values you should use for NODE_ENV
, either production
or development
, all lowercase. There's nothing to stop you from using other values, (test
, for example, if you wish to use some different logic when running automated tests), but be aware that if you are using third-party modules, they may explicitly compare with 'production'
or 'development'
to determine what to do, so there may be side effects that aren't immediately obvious.
Finally, note that it's a really bad idea to try to set NODE_ENV
from within a node application itself - if you do, it will only be applied to the process from which it was set, so things probably won't work like you'd expect them to. Don't do it - you'll regret it.
You can set the line size as per the width of the window and set wrap off using the following command.
set linesize 160;
set wrap off;
I have used 160 as per my preference you can set it to somewhere between 100 - 200
and setting wrap will not your data and it will display the data properly.
You should use BottomNavigationView from v25 Android Support Library. It represents a standard bottom navigation bar for application.
Here is a post on Medium that has a step by step guide: https://medium.com/@hitherejoe/exploring-the-android-design-support-library-bottom-navigation-drawer-548de699e8e0#.9vmiekxze
What is the underlying logic you want to implement? If, for instance, you want to test for the existence of a record to determine to insert or update then a better choice would be to use MERGE instead.
If you expect the record to exist most of the time, this is probably the most efficient way of doing things (although the CASE WHEN EXISTS solution is likely to be just as efficient):
begin
select null into dummy
from sales
where sales_type = 'Accessories'
and rownum = 1;
-- do things here when record exists
....
exception
when no_data_found then
-- do things here when record doesn't exists
.....
end;
You only need the ROWNUM line if SALES_TYPE is not unique. There's no point in doing a count when all you want to know is whether at least one record exists.
Simple solution to emit and show message by Exception.
try {
throw new TypeError("Error message");
}
catch (e){
console.log((<Error>e).message);//conversion to Error type
}
Above is not a solution if we don't know what kind of error can be emitted from the block. In such cases type guards should be used and proper handling for proper error should be done - take a look on @Moriarty answer.
Probably the easiest thing you can do is set the value to an empty string. This forces it to 'change' the file each time even if the same file is selected again.
<input type="file" value="" />
Get the currently opened app with:
adb shell dumpsys activity activities | grep mFocusedActivity
Get the path to the package name
adb shell pm path <packagename.apk>
4.Copy the path you got to the sdcard directory
adb shell cp /data/app/<packagename.apk> /sdcard
5.Pull the apk
adb pull /sdcard/base.apk
Edit
If step no 2 doesn't work use this:
adb shell dumpsys window windows | grep mCurrentFocus
Well, I just did
brew install mongodb
and followed the instructions that were output to the STDOUT
after it finished installing, and that seems to have worked just fine. I guess it kinda works just like make install
and overwrites (upgrades) a previous install.
Use elevation
instead of zIndex
for android devices
elevatedElement: {
zIndex: 3, // works on ios
elevation: 3, // works on android
}
This worked fine for me!
Simple and re-usable way to work around this problem.
Extension Method
public static class FormExts
{
public static void LoadOnUI(this Form frm, Action action)
{
if (frm.InvokeRequired) frm.Invoke(action);
else action.Invoke();
}
}
Sample Usage
private void OnAnyEvent(object sender, EventArgs args)
{
this.LoadOnUI(() =>
{
label1.Text = "";
button1.Text = "";
});
}
The stat module will do this as well as obtain a lot of other information for files. From the example documentation:
- stat: path=/path/to/something
register: p
- debug: msg="Path exists and is a directory"
when: p.stat.isdir is defined and p.stat.isdir
This problem may occur because your MySQL server is not installed and running. To do that start command prompt as admin and enter command:
"C:\Program Files (x86)\MySQL\MySQL Server 5.1\bin\mysqld" --install
If you get "service successfully installed" message then you need to start the MySQL service. To do that: go to Services window (Task Manager -> Services -> Open Services) Search for MySQL and Start it from the top navigation bar. Then if try to open mysql.exe it will work.
Add a reference to it in your project and a using clause at the top of the CS file where you want to use it.
Adding a reference:
Adding a using clause:
Add "using [namespace];" to the CS file where you want to reference your library. So, if the library you want to reference has a namespace called MyLibrary, add the following to the CS file:
using MyLibrary;
Check whether title has any value or not. If not, then retrive the value using Id.
<form>
Title : <input type="text" id="title" size="40" name="title" value = ''/>
<input type="button" onclick="headingSearch(this.form)" value="Submit"/><br /><br />
</form>
<script type="text/javascript">
function headingSearch(f)
{
var title=jQuery('#title').val();
$.ajax({
type: "POST",
url: "edit.php",
data: {title:title} ,
success: function(data) {
$('.center').html(data);
}
});
}
</script>
Try this code.
In php code, use echo instead of return. Only then, javascript data will have its value.
If you are using rails 3 or greater version
rails new your_project_name -d mysql
if you have earlier version
rails new -d mysql your_project_name
So before you create your project you need to find the rails version. that you can find by
rails -v
Many ways to do this. ismember is the first that comes to mind, since it is a set membership action you wish to take. Thus
X = primes(20);
ismember([15 17],X)
ans =
0 1
Since 15 is not prime, but 17 is, ismember has done its job well here.
Of course, find (or any) will also work. But these are not vectorized in the sense that ismember was. We can test to see if 15 is in the set represented by X, but to test both of those numbers will take a loop, or successive tests.
~isempty(find(X == 15))
~isempty(find(X == 17))
or,
any(X == 15)
any(X == 17)
Finally, I would point out that tests for exact values are dangerous if the numbers may be true floats. Tests against integer values as I have shown are easy. But tests against floating point numbers should usually employ a tolerance.
tol = 10*eps;
any(abs(X - 3.1415926535897932384) <= tol)
Use theme()
:
d <- data.frame(x=gl(10, 1, 10, labels=paste("long text label ", letters[1:10])), y=rnorm(10))
ggplot(d, aes(x=x, y=y)) + geom_point() +
theme(text = element_text(size=20),
axis.text.x = element_text(angle=90, hjust=1))
#vjust adjust the vertical justification of the labels, which is often useful
There's lots of good information about how to format your ggplots here. You can see a full list of parameters you can modify (basically, all of them) using ?theme
.
some thing as follows ::
Add this After the body tag
This is a rough sketch, you will need to modify it according to your needs.
<script>
var f = document.createElement("form");
f.setAttribute('method',"post");
f.setAttribute('action',"submit.php");
var i = document.createElement("input"); //input element, text
i.setAttribute('type',"text");
i.setAttribute('name',"username");
var s = document.createElement("input"); //input element, Submit button
s.setAttribute('type',"submit");
s.setAttribute('value',"Submit");
f.appendChild(i);
f.appendChild(s);
//and some more input elements here
//and dont forget to add a submit button
document.getElementsByTagName('body')[0].appendChild(f);
</script>
Adding host: localhost
was the magic for me
development:
adapter: postgresql
database: database_name_here
host: localhost
username: user_name_here
This is a nice way of sorting a table:
$(document).ready(function () {_x000D_
$('th').each(function (col) {_x000D_
$(this).hover(_x000D_
function () {_x000D_
$(this).addClass('focus');_x000D_
},_x000D_
function () {_x000D_
$(this).removeClass('focus');_x000D_
}_x000D_
);_x000D_
$(this).click(function () {_x000D_
if ($(this).is('.asc')) {_x000D_
$(this).removeClass('asc');_x000D_
$(this).addClass('desc selected');_x000D_
sortOrder = -1;_x000D_
} else {_x000D_
$(this).addClass('asc selected');_x000D_
$(this).removeClass('desc');_x000D_
sortOrder = 1;_x000D_
}_x000D_
$(this).siblings().removeClass('asc selected');_x000D_
$(this).siblings().removeClass('desc selected');_x000D_
var arrData = $('table').find('tbody >tr:has(td)').get();_x000D_
arrData.sort(function (a, b) {_x000D_
var val1 = $(a).children('td').eq(col).text().toUpperCase();_x000D_
var val2 = $(b).children('td').eq(col).text().toUpperCase();_x000D_
if ($.isNumeric(val1) && $.isNumeric(val2))_x000D_
return sortOrder == 1 ? val1 - val2 : val2 - val1;_x000D_
else_x000D_
return (val1 < val2) ? -sortOrder : (val1 > val2) ? sortOrder : 0;_x000D_
});_x000D_
$.each(arrData, function (index, row) {_x000D_
$('tbody').append(row);_x000D_
});_x000D_
});_x000D_
});_x000D_
});
_x000D_
table, th, td {_x000D_
border: 1px solid black;_x000D_
}_x000D_
th {_x000D_
cursor: pointer;_x000D_
}
_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>_x000D_
<table>_x000D_
<tr><th>id</th><th>name</th><th>age</th></tr>_x000D_
<tr><td>1</td><td>Julian</td><td>31</td></tr>_x000D_
<tr><td>2</td><td>Bert</td><td>12</td></tr>_x000D_
<tr><td>3</td><td>Xavier</td><td>25</td></tr>_x000D_
<tr><td>4</td><td>Mindy</td><td>32</td></tr>_x000D_
<tr><td>5</td><td>David</td><td>40</td></tr>_x000D_
</table>
_x000D_
The fiddle can be found here:
https://jsfiddle.net/e3s84Luw/
The explanation can be found here: https://www.learningjquery.com/2017/03/how-to-sort-html-table-using-jquery-code
i was looking for changing second row html and you can do cascading selector
$('#tbox1 tr:nth-child(2) td').html(11111)
Most people use singletons when they are trying to make themselves feel good about using a global variable. There are legitimate uses, but most of the time when people use them, the fact that there can only be one instance is just a trivial fact compared to the fact that it's globally accessible.
sys.stdout.write
will print without return carriage
import sys
sys.stdout.write("installing xxx")
sys.stdout.write(".")
http://en.wikibooks.org/wiki/Python_Programming/Input_and_output#printing_without_commas_or_newlines
It appears that you are using the default route which is defined as this:
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional }
);
The key part of that route is the {id}
piece. If you look at your action method, your parameter is k
instead of id
. You need to change your action method to this so that it matches the route parameter:
// change int k to int id
public ActionResult DetailsData(int id)
If you wanted to leave your parameter as k, then you would change the URL to be:
http://localhost:7317/Employee/DetailsData?k=4
You also appear to have a problem with your connection string. In your web.config, you need to change your connection string to this (provided by haim770 in another answer that he deleted):
<connectionStrings>
<add name="EmployeeContext"
connectionString="Server=.;Database=mytry;integrated security=True;"
providerName="System.Data.SqlClient" />
</connectionStrings>
This question is old, but I found another way around it is to use $('#formId')[0].submit()
, which gets the dom element instead of the jQuery object, thus bypassing any validation hooks. This button submits the parent form that contains the input.
<input type='button' value='SubmitWithoutValidation' onclick='$(this).closest('form')[0].submit()'/>
Also, make sure you don't have any input
's named "submit", or it overrides the function named submit
.
I am giving an extract from the book "C# 6.0 in a Nutshell by Joseph Albahari and Ben Albahari"
Here’s a demonstration on the use of LinkedList:
var tune = new LinkedList<string>();
tune.AddFirst ("do"); // do
tune.AddLast ("so"); // do - so
tune.AddAfter (tune.First, "re"); // do - re- so
tune.AddAfter (tune.First.Next, "mi"); // do - re - mi- so
tune.AddBefore (tune.Last, "fa"); // do - re - mi - fa- so
tune.RemoveFirst(); // re - mi - fa - so
tune.RemoveLast(); // re - mi - fa
LinkedListNode<string> miNode = tune.Find ("mi");
tune.Remove (miNode); // re - fa
tune.AddFirst (miNode); // mi- re - fa
foreach (string s in tune) Console.WriteLine (s);
In your specific case, you can do it just with a boring old counter:
var index, value, result;
for (index = 0; index < windowArray.length; ++index) {
value = windowArray[index];
if (value.substring(0, 3) === "id-") {
// You've found it, the full text is in `value`.
// So you might grab it and break the loop, although
// really what you do having found it depends on
// what you need.
result = value;
break;
}
}
// Use `result` here, it will be `undefined` if not found
But if your array is sparse, you can do it more efficiently with a properly-designed for..in
loop:
var key, value, result;
for (key in windowArray) {
if (windowArray.hasOwnProperty(key) && !isNaN(parseInt(key, 10))) {
value = windowArray[key];
if (value.substring(0, 3) === "id-") {
// You've found it, the full text is in `value`.
// So you might grab it and break the loop, although
// really what you do having found it depends on
// what you need.
result = value;
break;
}
}
}
// Use `result` here, it will be `undefined` if not found
Beware naive for..in
loops that don't have the hasOwnProperty
and !isNaN(parseInt(key, 10))
checks; here's why.
Off-topic:
Another way to write
var windowArray = new Array ("item","thing","id-3-text","class");
is
var windowArray = ["item","thing","id-3-text","class"];
...which is less typing for you, and perhaps (this bit is subjective) a bit more easily read. The two statements have exactly the same result: A new array with those contents.
This is a part of the android OS. Here is the actual version of the defined XML file.
simple_list_item_1:
<TextView xmlns:android="http://schemas.android.com/apk/res/android"
android:id="@android:id/text1"
style="?android:attr/listItemFirstLineStyle"
android:paddingTop="2dip"
android:paddingBottom="3dip"
android:layout_width="fill_parent"
android:layout_height="wrap_content" />
simple_list_item_2:
<TwoLineListItem xmlns:android="http://schemas.android.com/apk/res/android"
android:paddingTop="2dip"
android:paddingBottom="2dip"
android:layout_width="fill_parent"
android:layout_height="wrap_content">
<TextView android:id="@android:id/text1"
android:layout_width="fill_parent"
android:layout_height="wrap_content"
style="?android:attr/listItemFirstLineStyle"/>
<TextView android:id="@android:id/text2"
android:layout_width="fill_parent"
android:layout_height="wrap_content"
android:layout_below="@android:id/text1"
style="?android:attr/listItemSecondLineStyle" />
</TwoLineListItem>
And here's my solution should work with Excel > 2000, but tested only on 2007:
Private Sub SaveAllSheetsAsCSV()
On Error GoTo Heaven
' each sheet reference
Dim Sheet As Worksheet
' path to output to
Dim OutputPath As String
' name of each csv
Dim OutputFile As String
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
' ask the user where to save
OutputPath = InputBox("Enter a directory to save to", "Save to directory", Path)
If OutputPath <> "" Then
' save for each sheet
For Each Sheet In Sheets
OutputFile = OutputPath & "\" & Sheet.Name & ".csv"
' make a copy to create a new book with this sheet
' otherwise you will always only get the first sheet
Sheet.Copy
' this copy will now become active
ActiveWorkbook.SaveAs FileName:=OutputFile, FileFormat:=xlCSV, CreateBackup:=False
ActiveWorkbook.Close
Next
End If
Finally:
Application.ScreenUpdating = True
Application.DisplayAlerts = True
Application.EnableEvents = True
Exit Sub
Heaven:
MsgBox "Couldn't save all sheets to CSV." & vbCrLf & _
"Source: " & Err.Source & " " & vbCrLf & _
"Number: " & Err.Number & " " & vbCrLf & _
"Description: " & Err.Description & " " & vbCrLf
GoTo Finally
End Sub
(OT: I wonder if SO will replace some of my minor blogging)
I recently just ran into this issue as well. I had a very large table in the dialog div. It was >15,000 rows. When the .empty() was called on the dialog div, I was getting the error above.
I found a round-about solution where before I call cleaning the dialog box, I would remove every other row from the very large table, then call the .empty(). It seemed to have worked though. It seems that my old version of JQuery can't handle such large elements.
For doing so you just have to use the revert command, specifying the range of commits you want to get reverted.
Taking into account your example, you'd have to do this (assuming you're on branch 'master'):
git revert master~3..master
or git revert B...D
or git revert D C B
This will create a new commit in your local with the inverse commit of B, C and D (meaning that it will undo changes introduced by these commits):
A <- B <- C <- D <- BCD' <- HEAD
If you have access to PHP 5.3, the intl extension is very nice for doing things like this.
Here's an example from the manual:
$fmt = new IntlDateFormatter( "en_US" ,IntlDateFormatter::FULL, IntlDateFormatter::FULL,
'America/Los_Angeles',IntlDateFormatter::GREGORIAN );
$fmt->format(0); //0 for current time/date
In your case, you can do:
$fmt = new IntlDateFormatter( "en_US" ,IntlDateFormatter::FULL, IntlDateFormatter::FULL,
'America/New_York');
$fmt->format($datetime); //where $datetime may be a DateTime object, an integer representing a Unix timestamp value (seconds since epoch, UTC) or an array in the format output by localtime().
As you can set a Timezone such as America/New_York
, this is much better than using a GMT or UTC offset, as this takes into account the day light savings periods as well.
Finaly, as the intl extension uses ICU data, which contains a lot of very useful features when it comes to creating your own date/time formats.
First you need an object
public class MyObject {
public string Id {get;set;}
public string Text {get;set;}
...
}
Then in here
using (var twitpicResponse = (HttpWebResponse)request.GetResponse()) {
using (var reader = new StreamReader(twitpicResponse.GetResponseStream())) {
JavaScriptSerializer js = new JavaScriptSerializer();
var objText = reader.ReadToEnd();
MyObject myojb = (MyObject)js.Deserialize(objText,typeof(MyObject));
}
}
I haven't tested with the hierarchical object you have, but this should give you access to the properties you want.
JavaScriptSerializer System.Web.Script.Serialization