DECLARE @theDate DATETIME
SET @theDate = '2010-01-01'
Then change your query to use this logic:
AND
(
tblWO.OrderDate > DATEADD(MILLISECOND, -1, @theDate)
AND tblWO.OrderDate < DATEADD(DAY, 1, @theDate)
)
TLDR;
use location.href
or better use window.location.href
;
However if you read this you will gain undeniable proof.
The truth is it's fine to use but why do things that are questionable. You should take the higher road and just do it the way that it probably should be done.
location = "#/mypath/otherside"
var sections = location.split('/')
This code is perfectly correct syntax-wise, logic wise, type-wise you know the only thing wrong with it?
it has location
instead of location.href
what about this
var mystring = location = "#/some/spa/route"
what is the value of mystring
? does anyone really know without doing some test. No one knows what exactly will happen here. Hell I just wrote this and I don't even know what it does. location
is an object but I am assigning a string will it pass the string or pass the location object. Lets say there is some answer to how this should be implemented. Can you guarantee all browsers will do the same thing?
This i can pretty much guess all browsers will handle the same.
var mystring = location.href = "#/some/spa/route"
What about if you place this into typescript will it break because the type compiler will say this is suppose to be an object?
This conversation is so much deeper than just the location
object however. What this conversion is about what kind of programmer you want to be?
If you take this short-cut, yea it might be okay today, ye it might be okay tomorrow, hell it might be okay forever, but you sir are now a bad programmer. It won't be okay for you and it will fail you.
There will be more objects. There will be new syntax.
You might define a getter that takes only a string but returns an object and the worst part is you will think you are doing something correct, you might think you are brilliant for this clever method because people here have shamefully led you astray.
var Person.name = {first:"John":last:"Doe"}
console.log(Person.name) // "John Doe"
With getters and setters this code would actually work, but just because it can be done doesn't mean it's 'WISE' to do so.
Most people who are programming love to program and love to get better. Over the last few years I have gotten quite good and learn a lot. The most important thing I know now especially when you write Libraries is consistency and predictability.
Do the things that you can consistently do.
+"2"
<-- this right here parses the string to a number. should you use it?
or should you use parseInt("2")
?
what about var num =+"2"
?
From what you have learn, from the minds of stackoverflow i am not too hopefully.
If you start following these 2 words consistent and predictable. You will know the right answer to a ton of questions on stackoverflow.
Let me show you how this pays off.
Normally I place ;
on every line of javascript i write. I know it's more expressive. I know it's more clear. I have followed my rules. One day i decided not to. Why? Because so many people are telling me that it is not needed anymore and JavaScript can do without it. So what i decided to do this. Now because I have become sure of my self as a programmer (as you should enjoy the fruit of mastering a language) i wrote something very simple and i didn't check it. I erased one comma and I didn't think I needed to re-test for such a simple thing as removing one comma.
I wrote something similar to this in es6 and babel
var a = "hello world"
(async function(){
//do work
})()
This code fail and took forever to figure out. For some reason what it saw was
var a = "hello world"(async function(){})()
hidden deep within the source code it was telling me "hello world" is not a function.
For more fun node doesn't show the source maps of transpiled code.
Wasted so much stupid time. I was presenting to someone as well about how ES6 is brilliant and then I had to start debugging and demonstrate how headache free and better ES6 is. Not convincing is it.
I hope this answered your question. This being an old question it's more for the future generation, people who are still learning.
Question when people say it doesn't matter either way works. Chances are a wiser more experienced person will tell you other wise.
what if someone overwrite the location object. They will do a shim for older browsers. It will get some new feature that needs to be shimmed and your 3 year old code will fail.
My last note to ponder upon.
Writing clean, clear purposeful code does something for your code that can't be answer with right or wrong. What it does is it make your code an enabler.
You can use more things plugins, Libraries with out fear of interruption between the codes.
for the record. use
window.location.href
Certain MySQL engines support foreign keys. For example, InnoDB can establish constraints based on foreign keys. If you try to delete an entry in one table that has dependents in another, the delete will fail.
If you are using a table type in MySQL, such as MyISAM, that doesn't support foreign keys, you don't link the tables anywhere except your diagrams and queries.
For example, in a query you link two tables in a select statement with a join:
SELECT a, b from table1 LEFT JOIN table2 USING (common_field);
You can use the action()
helper to generate an URL to your route:
<form method="post" action="{{ action('WelcomeController@log_in') }}" accept-charset="UTF-8">
Note that the Laravel 5 default installation already comes with views and controllers for the whole authentication process. Just go to /home
on a fresh install and you should get redirected to a login page.
Also make sure to read the Authentication section in the docs
The error you're getting now (TokenMismatchException
) is because Laravel has CSRF protection out of the box
To make use of it (and make the error go away) add a hidden field to your form:
<input name="_token" type="hidden" value="{{ csrf_token() }}"/>
Alternatively you can also disable CSRF protection by removing 'App\Http\Middleware\VerifyCsrfToken'
from the $middleware
array in app/Http/Kernel.php
All of the instances installed should show up in the Services Snap-In in the Microsoft Management Console. To get the instance names, go to Start | Run | type Services.msc and look for all entries with "Sql Server (Instance Name)".
Perfect, try it:
SELECT ROUTINE_DEFINITION FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_SCHEMA = 'yourdb' AND ROUTINE_TYPE = 'PROCEDURE' AND ROUTINE_NAME = "procedurename";
Just for the sake of completeness for C following the others explanations, not sure for C++.
x
int *p;
int const *p;
int * const p;
int const * const p;
int **pp;
int ** const pp;
int * const *pp;
int const **pp;
int * const * const pp;
int const ** const pp;
int const * const *pp;
int const * const * const pp;
// Example 1
int x;
x = 10;
int *p = NULL;
p = &x;
int **pp = NULL;
pp = &p;
printf("%d\n", **pp);
// Example 2
int x;
x = 10;
int *p = NULL;
p = &x;
int ** const pp = &p; // Definition must happen during declaration
printf("%d\n", **pp);
// Example 3
int x;
x = 10;
int * const p = &x; // Definition must happen during declaration
int * const *pp = NULL;
pp = &p;
printf("%d\n", **pp);
// Example 4
int const x = 10; // Definition must happen during declaration
int const * p = NULL;
p = &x;
int const **pp = NULL;
pp = &p;
printf("%d\n", **pp);
// Example 5
int x;
x = 10;
int * const p = &x; // Definition must happen during declaration
int * const * const pp = &p; // Definition must happen during declaration
printf("%d\n", **pp);
// Example 6
int const x = 10; // Definition must happen during declaration
int const *p = NULL;
p = &x;
int const ** const pp = &p; // Definition must happen during declaration
printf("%d\n", **pp);
// Example 7
int const x = 10; // Definition must happen during declaration
int const * const p = &x; // Definition must happen during declaration
int const * const *pp = NULL;
pp = &p;
printf("%d\n", **pp);
// Example 8
int const x = 10; // Definition must happen during declaration
int const * const p = &x; // Definition must happen during declaration
int const * const * const pp = &p; // Definition must happen during declaration
printf("%d\n", **pp);
Just keep going, but may the humanity excommunicate you.
int x = 10;
int *p = &x;
int **pp = &p;
int ***ppp = &pp;
int ****pppp = &ppp;
printf("%d \n", ****pppp);
I encountered this when installing Recess (https://github.com/twitter/recess) to compile my CSS for Bootstrap 3.
When installing recess:
-npm install recess -g
You need to unlock permissions in your home
directory, like Noah
says:
sudo chown -R `whoami` ~/.npm
You also need write permissions to the node_modules
directory, like Xilo
says, so if it still isn't working, try:
sudo chown -R `whoami` /usr/local/lib/node_modules
If you are still seeing errors, you may also need to correct /usr/local
permissions:
sudo chown -R `whoami` /usr/local
Please note that as indicated in this post /usr/local/
isn't actually a system dir if you are on a Mac, so, this answer is actually perfectly "safe" for Mac users. However, if you are on Linux, see Christopher Will's answer below for a multi-user friendly, system dir safe (but more complex) solution.
Open Chrome Developer Tools, go to Network tab, make your request (you may need to check "Preserve Log" if the page refreshes). Find the request on the left, right-click, "Copy as cURL".
Use below Code, It worked for me.
<script type="text/javascript">
$(document).ready(function () {
$('#dialog').dialog({
autoOpen: false,
title: 'Basic Dialog'
});
$('#contactUs').click(function () {
$('#dialog').dialog('open');
});
});
</script>
You can place your folder in the root of the ServletContext.
Then specify a relative or absolute path to this directory in application.yml:
spring:
resources:
static-locations: file:some_temp_files/
The resources in this folder will be available (for downloading, for example) at:
http://<host>:<port>/<context>/your_file.csv
Please try the following code
Uri.fromFile(new File("/sdcard/sample.jpg"))
As mentioned in Takahiko Kawasaki's answer, java represents Unicode strings in the form of modified UTF-8 and in JVM-Spec CONSTANT_UTF8_info Structure, 2 bytes are allocated to length (and not the no. of characters of String).
To extend the answer, the ASM jvm bytecode library's putUTF8
method, contains this:
public ByteVector putUTF8(final String stringValue) {
int charLength = stringValue.length();
if (charLength > 65535) {
// If no. of characters> 65535, than however UTF-8 encoded length, wont fit in 2 bytes.
throw new IllegalArgumentException("UTF8 string too large");
}
for (int i = 0; i < charLength; ++i) {
char charValue = stringValue.charAt(i);
if (charValue >= '\u0001' && charValue <= '\u007F') {
// Unicode code-point encoding in utf-8 fits in 1 byte.
currentData[currentLength++] = (byte) charValue;
} else {
// doesnt fit in 1 byte.
length = currentLength;
return encodeUtf8(stringValue, i, 65535);
}
}
...
}
But when code-point mapping > 1byte, it calls encodeUTF8
method:
final ByteVector encodeUtf8(final String stringValue, final int offset, final int maxByteLength /*= 65535 */) {
int charLength = stringValue.length();
int byteLength = offset;
for (int i = offset; i < charLength; ++i) {
char charValue = stringValue.charAt(i);
if (charValue >= 0x0001 && charValue <= 0x007F) {
byteLength++;
} else if (charValue <= 0x07FF) {
byteLength += 2;
} else {
byteLength += 3;
}
}
...
}
In this sense, the max string length is 65535 bytes, i.e the utf-8 encoding length. and not char
count
You can find the modified-Unicode code-point range of JVM, from the above utf8 struct link.
If you test on an array function it'll work for all bounds:
Function IsVarArrayEmpty(anArray As Variant)
Dim i As Integer
On Error Resume Next
i = UBound(anArray,1)
If Err.number = 0 Then
IsVarArrayEmpty = False
Else
IsVarArrayEmpty = True
End If
End Function
If you want to keep data in a particular table (i.e. a static lookup table) while deleting/truncating data in other tables within the same db, then you need a loop with the exceptions in it. This is what I was looking for when I stumbled onto this question.
sp_MSForEachTable seems buggy to me (i.e. inconsistent behavior with IF statements) which is probably why its undocumented by MS.
declare @LastObjectID int = 0
declare @TableName nvarchar(100) = ''
set @LastObjectID = (select top 1 [object_id] from sys.tables where [object_id] > @LastObjectID order by [object_id])
while(@LastObjectID is not null)
begin
set @TableName = (select top 1 [name] from sys.tables where [object_id] = @LastObjectID)
if(@TableName not in ('Profiles', 'ClientDetails', 'Addresses', 'AgentDetails', 'ChainCodes', 'VendorDetails'))
begin
exec('truncate table [' + @TableName + ']')
end
set @LastObjectID = (select top 1 [object_id] from sys.tables where [object_id] > @LastObjectID order by [object_id])
end
Something along the lines:
import os
if os.name == "posix":
print(os.system("uname -a"))
# insert other possible OSes here
# ...
else:
print("unknown OS")
TL;DR
1) When you’re using a Factory you create an object, add properties to it, then return that same object. When you pass this factory into your controller, those properties on the object will now be available in that controller through your factory.
app.controller('myFactoryCtrl', function($scope, myFactory){
$scope.artist = myFactory.getArtist();
});
app.factory('myFactory', function(){
var _artist = 'Shakira';
var service = {};
service.getArtist = function(){
return _artist;
}
return service;
});
2) When you’re using Service, Angular instantiates it behind the scenes with the ‘new’ keyword. Because of that, you’ll add properties to ‘this’ and the service will return ‘this’. When you pass the service into your controller, those properties on ‘this’ will now be available on that controller through your service.
app.controller('myServiceCtrl', function($scope, myService){
$scope.artist = myService.getArtist();
});
app.service('myService', function(){
var _artist = 'Nelly';
this.getArtist = function(){
return _artist;
}
});
Non TL;DR
1) Factory
Factories are the most popular way to create and configure a service. There’s really not much more than what the TL;DR said. You just create an object, add properties to it, then return that same object. Then when you pass the factory into your controller, those properties on the object will now be available in that controller through your factory. A more extensive example is below.
app.factory('myFactory', function(){
var service = {};
return service;
});
Now whatever properties we attach to ‘service’ will be available to us when we pass ‘myFactory’ into our controller.
Now let’s add some ‘private’ variables to our callback function. These won’t be directly accessible from the controller, but we will eventually set up some getter/setter methods on ‘service’ to be able to alter these ‘private’ variables when needed.
app.factory('myFactory', function($http, $q){
var service = {};
var baseUrl = 'https://itunes.apple.com/search?term=';
var _artist = '';
var _finalUrl = '';
var makeUrl = function(){
_artist = _artist.split(' ').join('+');
_finalUrl = baseUrl + _artist + '&callback=JSON_CALLBACK';
return _finalUrl
}
return service;
});
Here you’ll notice we’re not attaching those variables/function to ‘service’. We’re simply creating them in order to either use or modify them later.
Now that our helper/private variables and function are in place, let’s add some properties to the ‘service’ object. Whatever we put on ‘service’ we’ll be able to directly use in whichever controller we pass ‘myFactory’ into.
We are going to create setArtist and getArtist methods that simply return or set the artist. We are also going to create a method that will call the iTunes API with our created URL. This method is going to return a promise that will fulfill once the data has come back from the iTunes API. If you haven’t had much experience using promises in Angular, I highly recommend doing a deep dive on them.
Below setArtist accepts an artist and allows you to set the artist. getArtist returns the artist callItunes first calls makeUrl() in order to build the URL we’ll use with our $http request. Then it sets up a promise object, makes an $http request with our final url, then because $http returns a promise, we are able to call .success or .error after our request. We then resolve our promise with the iTunes data, or we reject it with a message saying ‘There was an error’.
app.factory('myFactory', function($http, $q){
var service = {};
var baseUrl = 'https://itunes.apple.com/search?term=';
var _artist = '';
var _finalUrl = '';
var makeUrl = function(){
_artist = _artist.split(' ').join('+');
_finalUrl = baseUrl + _artist + '&callback=JSON_CALLBACK'
return _finalUrl;
}
service.setArtist = function(artist){
_artist = artist;
}
service.getArtist = function(){
return _artist;
}
service.callItunes = function(){
makeUrl();
var deferred = $q.defer();
$http({
method: 'JSONP',
url: _finalUrl
}).success(function(data){
deferred.resolve(data);
}).error(function(){
deferred.reject('There was an error')
})
return deferred.promise;
}
return service;
});
Now our factory is complete. We are now able to inject ‘myFactory’ into any controller and we’ll then be able to call our methods that we attached to our service object (setArtist, getArtist, and callItunes).
app.controller('myFactoryCtrl', function($scope, myFactory){
$scope.data = {};
$scope.updateArtist = function(){
myFactory.setArtist($scope.data.artist);
};
$scope.submitArtist = function(){
myFactory.callItunes()
.then(function(data){
$scope.data.artistData = data;
}, function(data){
alert(data);
})
}
});
In the controller above we’re injecting in the ‘myFactory’ service. We then set properties on our $scope object that are coming from data from ‘myFactory’. The only tricky code above is if you’ve never dealt with promises before. Because callItunes is returning a promise, we are able to use the .then() method and only set $scope.data.artistData once our promise is fulfilled with the iTunes data. You’ll notice our controller is very ‘thin’. All of our logic and persistent data is located in our service, not in our controller.
2) Service
Perhaps the biggest thing to know when dealing with creating a Service is that that it’s instantiated with the ‘new’ keyword. For you JavaScript gurus this should give you a big hint into the nature of the code. For those of you with a limited background in JavaScript or for those who aren’t too familiar with what the ‘new’ keyword actually does, let’s review some JavaScript fundamentals that will eventually help us in understanding the nature of a Service.
To really see the changes that occur when you invoke a function with the ‘new’ keyword, let’s create a function and invoke it with the ‘new’ keyword, then let’s show what the interpreter does when it sees the ‘new’ keyword. The end results will both be the same.
First let’s create our Constructor.
var Person = function(name, age){
this.name = name;
this.age = age;
}
This is a typical JavaScript constructor function. Now whenever we invoke the Person function using the ‘new’ keyword, ‘this’ will be bound to the newly created object.
Now let’s add a method onto our Person’s prototype so it will be available on every instance of our Person ‘class’.
Person.prototype.sayName = function(){
alert('My name is ' + this.name);
}
Now, because we put the sayName function on the prototype, every instance of Person will be able to call the sayName function in order alert that instance’s name.
Now that we have our Person constructor function and our sayName function on its prototype, let’s actually create an instance of Person then call the sayName function.
var tyler = new Person('Tyler', 23);
tyler.sayName(); //alerts 'My name is Tyler'
So all together the code for creating a Person constructor, adding a function to it’s prototype, creating a Person instance, and then calling the function on its prototype looks like this.
var Person = function(name, age){
this.name = name;
this.age = age;
}
Person.prototype.sayName = function(){
alert('My name is ' + this.name);
}
var tyler = new Person('Tyler', 23);
tyler.sayName(); //alerts 'My name is Tyler'
Now let’s look at what actually is happening when you use the ‘new’ keyword in JavaScript. First thing you should notice is that after using ‘new’ in our example, we’re able to call a method (sayName) on ‘tyler’ just as if it were an object - that’s because it is. So first, we know that our Person constructor is returning an object, whether we can see that in the code or not. Second, we know that because our sayName function is located on the prototype and not directly on the Person instance, the object that the Person function is returning must be delegating to its prototype on failed lookups. In more simple terms, when we call tyler.sayName() the interpreter says “OK, I’m going to look on the ‘tyler’ object we just created, locate the sayName function, then call it. Wait a minute, I don’t see it here - all I see is name and age, let me check the prototype. Yup, looks like it’s on the prototype, let me call it.”.
Below is code for how you can think about what the ‘new’ keyword is actually doing in JavaScript. It’s basically a code example of the above paragraph. I’ve put the ‘interpreter view’ or the way the interpreter sees the code inside of notes.
var Person = function(name, age){
//The line below this creates an obj object that will delegate to the person's prototype on failed lookups.
//var obj = Object.create(Person.prototype);
//The line directly below this sets 'this' to the newly created object
//this = obj;
this.name = name;
this.age = age;
//return this;
}
Now having this knowledge of what the ‘new’ keyword really does in JavaScript, creating a Service in Angular should be easier to understand.
The biggest thing to understand when creating a Service is knowing that Services are instantiated with the ‘new’ keyword. Combining that knowledge with our examples above, you should now recognize that you’ll be attaching your properties and methods directly to ‘this’ which will then be returned from the Service itself. Let’s take a look at this in action.
Unlike what we originally did with the Factory example, we don’t need to create an object then return that object because, like mentioned many times before, we used the ‘new’ keyword so the interpreter will create that object, have it delegate to it’s prototype, then return it for us without us having to do the work.
First things first, let’s create our ‘private’ and helper function. This should look very familiar since we did the exact same thing with our factory. I won’t explain what each line does here because I did that in the factory example, if you’re confused, re-read the factory example.
app.service('myService', function($http, $q){
var baseUrl = 'https://itunes.apple.com/search?term=';
var _artist = '';
var _finalUrl = '';
var makeUrl = function(){
_artist = _artist.split(' ').join('+');
_finalUrl = baseUrl + _artist + '&callback=JSON_CALLBACK'
return _finalUrl;
}
});
Now, we’ll attach all of our methods that will be available in our controller to ‘this’.
app.service('myService', function($http, $q){
var baseUrl = 'https://itunes.apple.com/search?term=';
var _artist = '';
var _finalUrl = '';
var makeUrl = function(){
_artist = _artist.split(' ').join('+');
_finalUrl = baseUrl + _artist + '&callback=JSON_CALLBACK'
return _finalUrl;
}
this.setArtist = function(artist){
_artist = artist;
}
this.getArtist = function(){
return _artist;
}
this.callItunes = function(){
makeUrl();
var deferred = $q.defer();
$http({
method: 'JSONP',
url: _finalUrl
}).success(function(data){
deferred.resolve(data);
}).error(function(){
deferred.reject('There was an error')
})
return deferred.promise;
}
});
Now just like in our factory, setArtist, getArtist, and callItunes will be available in whichever controller we pass myService into. Here’s the myService controller (which is almost exactly the same as our factory controller).
app.controller('myServiceCtrl', function($scope, myService){
$scope.data = {};
$scope.updateArtist = function(){
myService.setArtist($scope.data.artist);
};
$scope.submitArtist = function(){
myService.callItunes()
.then(function(data){
$scope.data.artistData = data;
}, function(data){
alert(data);
})
}
});
Like I mentioned before, once you really understand what ‘new’ does, Services are almost identical to factories in Angular.
I guess you'll need absolute position
.vertical_banner {position:relative;}
#bottom_link{position:absolute; bottom:0;}
from foo import *
adds all the names without leading underscores (or only the names defined in the modules __all__
attribute) in foo
into your current module.
In the above code with from socket import *
you just want to catch timeout
as you've pulled timeout
into your current namespace.
from socket import *
pulls in the definitions of everything inside of socket
but doesn't add socket
itself.
try:
# socketstuff
except timeout:
print 'caught a timeout'
Many people consider import *
problematic and try to avoid it. This is because common variable names in 2 or more modules that are imported in this way will clobber one another.
For example, consider the following three python files:
# a.py
def foo():
print "this is a's foo function"
# b.py
def foo():
print "this is b's foo function"
# yourcode.py
from a import *
from b import *
foo()
If you run yourcode.py
you'll see just the output "this is b's foo function".
For this reason I'd suggest either importing the module and using it or importing specific names from the module:
For example, your code would look like this with explicit imports:
import socket
from socket import AF_INET, SOCK_DGRAM
def main():
client_socket = socket.socket(AF_INET, SOCK_DGRAM)
client_socket.settimeout(1)
server_host = 'localhost'
server_port = 1234
while(True):
client_socket.sendto('Message', (server_host, server_port))
try:
reply, server_address_info = client_socket.recvfrom(1024)
print reply
except socket.timeout:
#more code
Just a tiny bit more typing but everything's explicit and it's pretty obvious to the reader where everything comes from.
In case you want unix timestamp
let now : Date = Date()
let currentCalendar : NSCalendar = Calendar.current as NSCalendar
let nowPlusAddTime : Date = currentCalendar.date(byAdding: .second, value: accessTime, to: now, options: .matchNextTime)!
let unixTime = nowPlusAddTime.timeIntervalSince1970
It may be faster if you create a materialized view (with schema binding). Non-materialized views execute just like the regular query.
Please note that Arrays.stream(arr) create a LongStream (or IntStream, ...) instead of Stream so the map function cannot be used to modify the type. This is why .mapToLong, mapToObject, ... functions are provided.
Take a look at why-cant-i-map-integers-to-strings-when-streaming-from-an-array
An easy way is to convert the dates into milliseconds after January 1, 1970 (use Date.getTime()) and then compare these values.
mysql_*
functions have been removed in PHP 7.
You probably have PHP 7 in XAMPP. You now have two alternatives: MySQLi and PDO.
Additionally, here is a nice wiki page about PDO.
If you're using RestangularV2
to post to a spring controller in java you can get this exception if you use RestangularV2.one()
instead of RestangularV2.all()
For instance you want to free the port 8080 Then, follow these commands.
netstat -ano
taskkill /f /im [PID of the port 8080 got from previous command]
Done!
You have init'd myRequest
as NSMutableURLRequest
, you need this:
var URLRequest
Swift is ditching both the NSMutable...
thing. Just use var
for the new classes.
The fetchSize
parameter is a hint to the JDBC driver as to many rows to fetch in one go from the database. But the driver is free to ignore this and do what it sees fit. Some drivers, like the Oracle one, fetch rows in chunks, so you can read very large result sets without needing lots of memory. Other drivers just read in the whole result set in one go, and I'm guessing that's what your driver is doing.
You can try upgrading your driver to the SQL Server 2008 version (which might be better), or the open-source jTDS driver.
Using Environment class we can get application. Properties values
@Autowired,
private Environment env;
and access using
String password =env.getProperty(your property key);
Go to Tools, Fiddler Options ..., select the Connections tab, then make sure Monitor all connections is ticked. Like Antony Scott said, but also make sure that the "Web Sessions" pane is set to "Capturing" and [ "Web Browsers" OR "All Processes" ]. Looks like the default is "Non-Browser".
I use this Git alias instead of copy/pasting the suggestion from Git every time: https://gist.github.com/ekilah/88a880c84a50b73bd306
Source copied below (add this to your ~/.gitconfig
file):
[alias]
pushup = "!gitbranchname() { git symbolic-ref --short HEAD; }; gitpushupstream() { git push --set-upstream origin `gitbranchname`; }; gitpushupstream"
Objective-C:
UIControl *headerView = [[UIControl alloc] initWithFrame:CGRectMake(0, 0, tableView.bounds.size.width, nextY)];
[headerView addTarget:self action:@selector(myEvent:) forControlEvents:UIControlEventTouchDown];
Swift:
let headerView = UIControl(frame: CGRect(x: 0, y: 0, width: tableView.bounds.size.width, height: nextY))
headerView.addTarget(self, action: #selector(myEvent(_:)), for: .touchDown)
The question asks:
How do I add a touch event to a UIView?
It isn't asking for a tap event.
Specifically OP wants to implement UIControlEventTouchDown
Switching the UIView
to UIControl
is the right answer here because Gesture Recognisers
don't know anything about .touchDown
, .touchUpInside
, .touchUpOutside
etc.
Additionally, UIControl inherits from UIView so you're not losing any functionality.
If all you want is a tap, then you can use the Gesture Recogniser. But if you want finer control, like this question asks for, you'll need UIControl.
https://developer.apple.com/documentation/uikit/uicontrol?language=objc https://developer.apple.com/documentation/uikit/uigesturerecognizer?language=objc
One more option in simple way
Map<String,Choice> map = new HashMap<>();
choices.forEach(e->map.put(e.getName(),e));
You would use the read.csv
function; for example:
dat = read.csv("spam.csv", header = TRUE)
You can also reference this tutorial for more details.
Note: make sure the .csv
file to read is in your working directory (using getwd()
) or specify the right path to file. If you want, you can set the current directory using setwd
.
2.0.1 Final
using Gulp (TypeScript - Target: ES5)npm install
(run in cmd when direcory is projectFolder)npm run bundle
(run in cmd when direcory is projectFolder)
bundles are generated to projectFolder / bundles /
bundles/dependencies.bundle.js
[ size: ~ 1 MB (as small as possible) ]
bundles/app.bundle.js
[ size: depends on your project, mine is ~ 0.5 MB ]
var gulp = require('gulp'),
tsc = require('gulp-typescript'),
Builder = require('systemjs-builder'),
inlineNg2Template = require('gulp-inline-ng2-template');
gulp.task('bundle', ['bundle-app', 'bundle-dependencies'], function(){});
gulp.task('inline-templates', function () {
return gulp.src('app/**/*.ts')
.pipe(inlineNg2Template({ useRelativePaths: true, indent: 0, removeLineBreaks: true}))
.pipe(tsc({
"target": "ES5",
"module": "system",
"moduleResolution": "node",
"sourceMap": true,
"emitDecoratorMetadata": true,
"experimentalDecorators": true,
"removeComments": true,
"noImplicitAny": false
}))
.pipe(gulp.dest('dist/app'));
});
gulp.task('bundle-app', ['inline-templates'], function() {
// optional constructor options
// sets the baseURL and loads the configuration file
var builder = new Builder('', 'dist-systemjs.config.js');
return builder
.bundle('dist/app/**/* - [@angular/**/*.js] - [rxjs/**/*.js]', 'bundles/app.bundle.js', { minify: true})
.then(function() {
console.log('Build complete');
})
.catch(function(err) {
console.log('Build error');
console.log(err);
});
});
gulp.task('bundle-dependencies', ['inline-templates'], function() {
// optional constructor options
// sets the baseURL and loads the configuration file
var builder = new Builder('', 'dist-systemjs.config.js');
return builder
.bundle('dist/app/**/*.js - [dist/app/**/*.js]', 'bundles/dependencies.bundle.js', { minify: true})
.then(function() {
console.log('Build complete');
})
.catch(function(err) {
console.log('Build error');
console.log(err);
});
});
{
"name": "angular2-quickstart",
"version": "1.0.0",
"scripts": {
***
"gulp": "gulp",
"rimraf": "rimraf",
"bundle": "gulp bundle",
"postbundle": "rimraf dist"
},
"license": "ISC",
"dependencies": {
***
},
"devDependencies": {
"rimraf": "^2.5.2",
"gulp": "^3.9.1",
"gulp-typescript": "2.13.6",
"gulp-inline-ng2-template": "2.0.1",
"systemjs-builder": "^0.15.16"
}
}
(function(global) {
// map tells the System loader where to look for things
var map = {
'app': 'app',
'rxjs': 'node_modules/rxjs',
'angular2-in-memory-web-api': 'node_modules/angular2-in-memory-web-api',
'@angular': 'node_modules/@angular'
};
// packages tells the System loader how to load when no filename and/or no extension
var packages = {
'app': { main: 'app/boot.js', defaultExtension: 'js' },
'rxjs': { defaultExtension: 'js' },
'angular2-in-memory-web-api': { defaultExtension: 'js' }
};
var packageNames = [
'@angular/common',
'@angular/compiler',
'@angular/core',
'@angular/forms',
'@angular/http',
'@angular/platform-browser',
'@angular/platform-browser-dynamic',
'@angular/router',
'@angular/router-deprecated',
'@angular/testing',
'@angular/upgrade',
];
// add package entries for angular packages in the form '@angular/common': { main: 'index.js', defaultExtension: 'js' }
packageNames.forEach(function(pkgName) {
packages[pkgName] = { main: 'index.js', defaultExtension: 'js' };
});
var config = {
map: map,
packages: packages
};
// filterSystemConfig - index.asp's chance to modify config before we register it.
if (global.filterSystemConfig) { global.filterSystemConfig(config); }
System.config(config);
})(this);
var map = {
'app': 'dist/app',
};
dist-systemjs.config.js
tag after the bundle tags would still allow the program to run but the dependency bundle would be ignored and dependencies would be loaded from the node_modules
folder.<!doctype html>
<html lang="en">
<head>
<meta charset="utf-8"/>
<meta name="viewport" content="width=device-width, initial-scale=1"/>
<base href="/"/>
<title>Angular</title>
<link rel="stylesheet" type="text/css" href="style.css"/>
</head>
<body>
<my-app>
loading...
</my-app>
<!-- Polyfill(s) for older browsers -->
<script src="node_modules/core-js/client/shim.min.js"></script>
<script src="node_modules/zone.js/dist/zone.min.js"></script>
<script src="node_modules/reflect-metadata/Reflect.js"></script>
<script src="node_modules/systemjs/dist/system.js"></script>
<script src="dist-systemjs.config.js"></script>
<!-- Project Bundles. Note that these have to be loaded AFTER the systemjs.config script -->
<script src="bundles/dependencies.bundle.js"></script>
<script src="bundles/app.bundle.js"></script>
<script>
System.import('app/boot').catch(function (err) {
console.error(err);
});
</script>
</body>
</html>
The best I could do yet :)
Try the following:
foo(*values)
This can be found in the Python docs as Unpacking Argument Lists.
2 way conversion in c# from boolean to visibility
using System;
using System.Windows;
using System.Windows.Data;
namespace FaceTheWall.converters
{
class BooleanToVisibilityConverter : IValueConverter
{
public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)
{
if (value is Boolean && (bool)value)
{
return Visibility.Visible;
}
return Visibility.Collapsed;
}
public object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)
{
if (value is Visibility && (Visibility)value == Visibility.Visible)
{
return true;
}
return false;
}
}
}
I had the same issue on my Mac machine (correctly followed all the installation steps suggested by brew install
).
Deleting the error file fixed it for me:
sudo rm -rf /usr/local/var/mysql/dev.work.err
(dev.work
is my hostname)
This worked because dev.work.err
was owned by _mysql:wheel
instead of my own username.
CHOWN-ing the error file would have probably fixed it as well.
DO
Give the class attribute a value indicating the nature of the data (i.e. class="footnote"
is good)
Create a CSS style sheet for the page
Define a CSS style that is attached to the class that you assign to the element
.footnote {
font-style:italic;
}
DO NOT
<i>
or <em>
elements - they're unsupported and ties the data and presentation too close.class="italic"
).As of year 2020, JetBrains suggests to commit the .idea
folder.
The JetBrains IDEs (webstorm, intellij, android studio, pycharm, clion, etc.) automatically add that folder to your git repository (if there's one).
Inside the folder .idea
, has been already created a .gitignore
, updated by the IDE itself to avoid to commit user related settings that may contains privacy/password data.
It is safe (and usually useful) to commit the .idea
folder.
I ran into the same problem and Master Morality's answer didn't do it for me. The following, which is based on the previous answer, worked:
private void run_cmd(string cmd, string args)
{
ProcessStartInfo start = new ProcessStartInfo();
start.FileName = cmd;//cmd is full path to python.exe
start.Arguments = args;//args is path to .py file and any cmd line args
start.UseShellExecute = false;
start.RedirectStandardOutput = true;
using(Process process = Process.Start(start))
{
using(StreamReader reader = process.StandardOutput)
{
string result = reader.ReadToEnd();
Console.Write(result);
}
}
}
As an example, cmd would be @C:/Python26/python.exe
and args would be C://Python26//test.py 100
if you wanted to execute test.py with cmd line argument 100. Note that the path the .py file does not have the @ symbol.
For today's Date
$(document).ready(function() {
$('#textboxname').datepicker();
$('#textboxname').datepicker('setDate', 'today');});
Add a reference to the CppCodeProvider assembly.
Difference between SASS and SCSS article explains the difference in details. Don’t be confused by the SASS and SCSS options, although I also was initially, .scss is Sassy CSS and is the next generation of .sass.
If that didn’t make sense you can see the difference in code below.
/* SCSS */
$blue: #3bbfce;
$margin: 16px;
.content-navigation {
border-color: $blue;
color: darken($blue, 9%);
}
.border {
padding: $margin / 2; margin: $margin / 2; border-color: $blue;
}
In the code above we use ; to separate the declarations. I’ve even added all the declarations for .border onto a single line to illustrate this point further. In contrast, the SASS code below must be on different lines with indentation and there is no use of the ;.
/* SASS */
$blue: #3bbfce
$margin: 16px
.content-navigation
border-color: $blue
color: darken($blue, 9%)
.border
padding: $margin / 2
margin: $margin / 2
border-color: $blue
You can see from the CSS below that the SCSS style is a lot more similar to regular CSS than the older SASS approach.
/* CSS */
.content-navigation {
border-color: #3bbfce;
color: #2b9eab;
}
.border {
padding: 8px;
margin: 8px;
border-color: #3bbfce;
}
I think most of the time these days if someone mentions that they are working with Sass they are referring to authoring in .scss rather than the traditional .sass way.
myString.Length; //will get you your result
//alternatively, if you only want the count of letters:
myString.Count(char.IsLetter);
//however, if you want to display the words as ***_***** (where _ is a space)
//you can also use this:
//small note: that will fail with a repeated word, so check your repeats!
myString.Split(' ').ToDictionary(n => n, n => n.Length);
//or if you just want the strings and get the counts later:
myString.Split(' ');
//will not fail with repeats
//and neither will this, which will also get you the counts:
myString.Split(' ').Select(n => new KeyValuePair<string, int>(n, n.Length));
Technically speaking you have a few options here:
If you are using an IDE like Sublime Text and integrated MSN plugin for Typescript: http://blogs.msdn.com/b/interoperability/archive/2012/10/01/sublime-text-vi-emacs-typescript-enabled.aspx you can create a build system which compile the .ts
source to .js
automatically. Here is the explanation how you can do it: How to configure a Sublime Build System for TypeScript.
You can define even to compile the source code to destination .js
file on file save. There is a sublime package hosted on github: https://github.com/alexnj/SublimeOnSaveBuild which make this happen, only you need to include the ts
extension in the SublimeOnSaveBuild.sublime-settings
file.
Another possibility would be to compile each file in the command line. You can compile even multiple files at once by separating them with spaces like so: tsc foo.ts bar.ts
. Check this thread: How can I pass multiple source files to the TypeScript compiler?, but i think the first option is more handy.
My sugestion in postgresql
SELECT cpf || ';' || nome || ';' || telefone
FROM (
SELECT cpf
,nome
,STRING_AGG(CONCAT_WS( ';' , DDD_1, TELEFONE_1),';') AS telefone
FROM (
SELECT DISTINCT *
FROM temp_bd
ORDER BY cpf DESC ) AS y
GROUP BY 1,2 ) AS x
You get a nice header output with the following command:
curl -L -v -s -o /dev/null google.de
-L, --location
follow redirects-v, --verbose
more output, indicates the direction-s, --silent
don't show a progress bar-o, --output /dev/null
don't show received bodyOr the shorter version:
curl -Lvso /dev/null google.de
Results in:
* Rebuilt URL to: google.de/
* Trying 2a00:1450:4008:802::2003...
* Connected to google.de (2a00:1450:4008:802::2003) port 80 (#0)
> GET / HTTP/1.1
> Host: google.de
> User-Agent: curl/7.43.0
> Accept: */*
>
< HTTP/1.1 301 Moved Permanently
< Location: http://www.google.de/
< Content-Type: text/html; charset=UTF-8
< Date: Fri, 12 Aug 2016 15:45:36 GMT
< Expires: Sun, 11 Sep 2016 15:45:36 GMT
< Cache-Control: public, max-age=2592000
< Server: gws
< Content-Length: 218
< X-XSS-Protection: 1; mode=block
< X-Frame-Options: SAMEORIGIN
<
* Ignoring the response-body
{ [218 bytes data]
* Connection #0 to host google.de left intact
* Issue another request to this URL: 'http://www.google.de/'
* Trying 2a00:1450:4008:800::2003...
* Connected to www.google.de (2a00:1450:4008:800::2003) port 80 (#1)
> GET / HTTP/1.1
> Host: www.google.de
> User-Agent: curl/7.43.0
> Accept: */*
>
< HTTP/1.1 200 OK
< Date: Fri, 12 Aug 2016 15:45:36 GMT
< Expires: -1
< Cache-Control: private, max-age=0
< Content-Type: text/html; charset=ISO-8859-1
< P3P: CP="This is not a P3P policy! See https://www.google.com/support/accounts/answer/151657?hl=en for more info."
< Server: gws
< X-XSS-Protection: 1; mode=block
< X-Frame-Options: SAMEORIGIN
< Set-Cookie: NID=84=Z0WT_INFoDbf_0FIe_uHqzL9mf3DMSQs0mHyTEDAQOGY2sOrQaKVgN2domEw8frXvo4I3x3QVLqCH340HME3t1-6gNu8R-ArecuaneSURXNxSXYMhW2kBIE8Duty-_w7; expires=Sat, 11-Feb-2017 15:45:36 GMT; path=/; domain=.google.de; HttpOnly
< Accept-Ranges: none
< Vary: Accept-Encoding
< Transfer-Encoding: chunked
<
{ [11080 bytes data]
* Connection #1 to host www.google.de left intact
As you can see curl
outputs both the outgoing and the incoming headers and skips the bodydata althought telling you how big the body is.
Additionally for every line the direction is indicated so that it is easy to read. I found it particular useful to trace down long chains of redirects.
This avoids your problem rather than fixing it directly, but I'd recommend adding a ~/.ssh/config
file and having something like this
Host git_host
HostName git.host.de
User root
Port 4019
then you can have
url = git_host:/var/cache/git/project.git
and you can also ssh git_host
and scp git_host ...
and everything will work out.
You can use COPY. You need to specify the directory explicitly. It won't be created by itself
COPY go /usr/local/go
Reference: Docker CP reference
May 2017
As of version 1.13
Add multiple cursors with Ctrl / Cmd + Click
VSCode
developers have introduced a new setting, editor.multiCursorModifier
, to change the modifier key for applying multiple cursors to Cmd + Click
on macOS and Ctrl + Click
on Windows and Linux. This lets users coming from other editors such as Sublime Text or Atom continue to use the keyboard modifier they are familiar with.
The setting can be set to:
ctrl/Cmd
- Maps to Ctrl on Windows and Cmd on macOS.alt
- The existing default Alt.There's also a new menu item Use Ctrl + Click
for Multi-Cursor
in the Selection
menu to quickly toggle this setting.
The Go To Definition and Open Link gestures will also respect this setting and adapt such that they do not conflict. For example, when the setting is ctrl/Cmd
, multiple cursors can be added with Ctrl / Cmd + Click
, and opening links or going to definition can be invoked with Alt +Click
.
With fixing Issue #2106, it is now possible to also remove a cursor by using the same gesture on top of an existing selection.
upstream
in the github example is just the name they've chosen to refer to that repository. You may choose any that you like when using git remote add
. Depending on what you select for this name, your git pull
usage will change. For example, if you use:
git remote add upstream git://github.com/somename/original-project.git
then you would use this to pull changes:
git pull upstream master
But, if you choose origin for the name of the remote repo, your commands would be:
To name the remote repo in your local config: git remote add origin git://github.com/somename/original-project.git
And to pull: git pull origin master
Java programming provides wrapper class for each primitive data types, to convert a primitive data types to correspond object of wrapper class.
You can use a method reference:
import static java.util.Comparator.*;
import static java.util.stream.Collectors.*;
Arrays.asList(files).stream()
.filter(file -> isNameLikeBaseLine(file, baseLineFile.getName()))
.sorted(comparing(File::lastModified).reversed())
.skip(numOfNewestToLeave)
.forEach(item -> item.delete());
In alternative of method reference you can use a lambda expression, so the argument of comparing become:
.sorted(comparing(file -> file.lastModified()).reversed());
If you removed the make all
line from your "fresh" target:
fresh :
rm -f *.o $(EXEC)
clear
You could simply run the command make fresh all
, which will execute as make fresh; make all
.
Some might consider this as a second instance of make, but it's certainly not a sub-instance of make (a make inside of a make), which is what your attempt seemed to result in.
The Mike R's solution works for me. This is the full set of commands:
Xvfb :99 -ac -screen 0 1280x1024x24 &
export DISPLAY=:99
nice -n 10 x11vnc 2>&1 &
Later you can run google-chrome:
google-chrome --no-sandbox &
Or start google chrome via selenium driver (for example):
ng e2e --serve true --port 4200 --watch true
Protractor.conf file:
capabilities: {
'browserName': 'chrome',
'chromeOptions': {
'args': ['no-sandbox']
}
},
This may help you, also it depends how your CSV
file is formated.
Data
> Import External Data
> Import Data
.CSV
file.Fixed width
, then Next
.columns
. then, you may check the splitted columns in Data preview
panel.Finish
& see.Note: you may also go with Delimited
as Original data type.
In that case, you need to key-in your delimiting character.
HTH!
Not sure why you'd want to, but the C# way would be
string[] newArray = new string[0];
I'm guessing that VB won't be too dissimilar to this.
If you're building an empty array so you can populate it with values later, you really should consider using
List<string>
and converting it to an array (if you really need it as an array) with
newListOfString.ToArray();
Accessing colors from a non-activity class can be difficult. One of the alternatives that I found was using enum
. enum
offers a lot of flexibility.
public enum Colors
{
COLOR0(0x26, 0x32, 0x38), // R, G, B
COLOR1(0xD8, 0x1B, 0x60),
COLOR2(0xFF, 0xFF, 0x72),
COLOR3(0x64, 0xDD, 0x17);
private final int R;
private final int G;
private final int B;
Colors(final int R, final int G, final int B)
{
this.R = R;
this.G = G;
this.B = B;
}
public int getColor()
{
return (R & 0xff) << 16 | (G & 0xff) << 8 | (B & 0xff);
}
public int getR()
{
return R;
}
public int getG()
{
return G;
}
public int getB()
{
return B;
}
}
If you have multiple source files, you probably actually want to use link-time-optimization to output one bitcode file for the entire program. The other answers given will cause you to end up with a bitcode file for every source file.
Instead, you want to compile with link-time-optimization
clang -flto -c program1.c -o program1.o
clang -flto -c program2.c -o program2.o
and for the final linking step, add the argument -Wl,-plugin-opt=also-emit-llvm
clang -flto -Wl,-plugin-opt=also-emit-llvm program1.o program2.o -o program
This gives you both a compiled program and the bitcode corresponding to it (program.bc). You can then modify program.bc in any way you like, and recompile the modified program at any time by doing
clang program.bc -o program
although be aware that you need to include any necessary linker flags (for external libraries, etc) at this step again.
Note that you need to be using the gold linker for this to work. If you want to force clang to use a specific linker, create a symlink to that linker named "ld" in a special directory called "fakebin" somewhere on your computer, and add the option
-B/home/jeremy/fakebin
to any linking steps above.
https://docs.angularjs.org/guide/$location#html-link-rewriting
In cases like the following, links are not rewritten; instead, the browser will perform a full page reload to the original link.
Links that contain target element Example:
<a href="/ext/link?a=b" target="_self">link</a>
Absolute links that go to a different domain Example:
<a href="http://angularjs.org/">link</a>
Links starting with '/' that lead to a different base path when base is defined Example:
<a href="/not-my-base/link">link</a>
So in your case, you should add a target attribute like so...
<a target="_self" href="example.com/uploads/asd4a4d5a.pdf" download="foo.pdf">
If you have too many installers to find what you are looking for easily, here is some powershell to provide a filter and narrow it down a little by display name.
$filter = "*core*sdk*"; (Get-ChildItem HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall).Name | % { $path = "Registry::$_"; Get-ItemProperty $path } | Where-Object { $_.DisplayName -like $filter } | Select-Object -Property DisplayName, PsChildName
Just for the record:
>>> int('55063.000000')
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ValueError: invalid literal for int() with base 10: '55063.000000'
Got me here...
>>> int(float('55063.000000'))
55063.0
Has to be used!
Arguments
property in Execute Process Task available on the Control Flow tab is expecting a value of data type DT_WSTR
and not DT_STR
.
Create an SSIS package in Business Intelligence Development Studio (BIDS) 2008 R2 and name it as SO_13177007.dtsx
. Create a package variable with the following information.
Name Scope Data Type Value
------ ------------ ---------- -----
IdVar SO_13177007 Int32 123
Drag and drop an Execute Process Task onto the Control Flow tab and name it as Pass arguments
Double-click the Execute Process Task to open the Execute Process Task Editor
. Click Expressions page and then click the Ellipsis button against the Expressions property to view the Property Expression Editor
.
On the Property Expression Editor, select the property Arguments
and click the Ellipsis button against the property to open the Expression Builder
.
On the Expression Builder, enter the following expression and click Evaluate Expression
. This expression tries to convert the integer value in the variable IdVar
to string data type.
(DT_STR, 10, 1252) @[User::IdVar]
Clicking Evaluate Expression will display the following error message because the Arguments property on Execute Process Task expects a value of data type DT_WSTR
.
To fix the issue, update the expression as shown below to convert the integer value to data type DT_WSTR
. Clicking Evaluate Expression will display the value in the Evaluated value text area.
(DT_WSTR, 10) @[User::IdVar]
To understand the differences between the data types DT_STR
and DT_WSTR
in SSIS, read the documentation Integration Services Data Types on MSDN. Here are the quotes from the documentation about these two string data types.
A null-terminated ANSI/MBCS character string with a maximum length of 8000 characters. (If a column value contains additional null terminators, the string will be truncated at the occurrence of the first null.)
A null-terminated Unicode character string with a maximum length of 4000 characters. (If a column value contains additional null terminators, the string will be truncated at the occurrence of the first null.)
Go to Project Structure - Modules - Source Folders and find the target/generated-sources/antlr4/com/mycompany
- click Edit properties and set Package prefix to com.mycompany
.
This is exactly the reason why we can set Package prefix on source dirs.
Different but related problem here
Let's say you additionally want the week to begin on Monday (instead of default on Sunday), then the following is helpful:
require(lubridate)
df$day = ifelse(wday(df$time)==1,6,wday(df$time)-2)
The result is the days in the interval [0,..,6].
If you want the interval to be [1,..7], use the following:
df$day = ifelse(wday(df$time)==1,7,wday(df$time)-1)
... or, alternatively:
df$day = df$day + 1
The fact that the previously accepted answer refers to php 5.3.6, while the current version of MAMP ships with 7.2.1 as the default (as of early 2018), points out that this is not a very sustainable solution. You can make your path update automatically by adding an extra line to your .bash_profile
or .zshrc
to get the latest version of PHP from /Applications/MAMP/bin/php/
and export that to your path. Here’s how I do it:
# Use MAMP version of PHP
PHP_VERSION=`command ls /Applications/MAMP/bin/php/ | sort -n | tail -1`
export PATH=/Applications/MAMP/bin/php/${PHP_VERSION}/bin:$PATH
(Use source ~/.bash_profile
after making your changes to make sure they take effect.)
As others have mentioned, you will likely also want to modify your shell to use MAMP’s mysql executable, which is located in /Applications/MAMP/Library/bin
. However, I do not recommend exporting that folder, because there are a bunch of other executables there, like libtool
, that you probably don’t want to be giving priority to over your system installed versions. This issue prevented me from installing a node package recently (libxmljs), as documented here.
My solution was to define and export mysql
and mysqladmin
as functions:
# Export MAMP MySQL executables as functions
# Makes them usable from within shell scripts (unlike an alias)
mysql() {
/Applications/MAMP/Library/bin/mysql "$@"
}
mysqladmin() {
/Applications/MAMP/Library/bin/mysqladmin "$@"
}
export -f mysql
export -f mysqladmin
I used functions instead of aliases, because aliases don’t get passed to child processes, or at least not in the context of a shell script. The only downside I’ve found is that running which mysql
and which mysqladmin
will no longer return anything, which is a bummer. If you want to check which mysql is being used and make sure everything is copacetic, use mysql --version
instead.
Note: @julianromera points out that zsh doesn’t support exporting functions, so in that case, you’re best off using an alias, like alias mysql='/Applications/MAMP/Library/bin/mysql'
. Just be aware that your aliases might not be available from subshells (like when executing a shell script).
Now that GDPR is a thing, people visiting this question probably use a cookie script. Well, that script caused the problem for me. Apparently, PHP uses a cookie called PHPSESSID
to track the session. If that script deletes it, you lose your data.
I used this cookie script. It has an option to enable "essential" cookies. I added PHPSESSID
to the list, the script stopped deleting the cookie, and everything started to work again.
You could probably enable some PHP setting to avoid using PHPSESSID
, but if your cookie script is the cause of the problem, why not fix that.
You are most often better of using the most general usable type, in this case the IList or even better the IEnumerable interface, so that you can switch the implementation conveniently at a later time.
However, in .NET 2.0, there is an annoying thing - IList does not have a Sort() method. You can use a supplied adapter instead:
ArrayList.Adapter(list).Sort()
Step 1 : git checkout <branch_name>
This is obvious to go into that branch.
Step 2 : git pull -s recursive -X theirs
Take remote branch changes and replace with their changes if conflict arise.
Here if you do git status
you will get something like this your branch is ahead of 'origin/master' by 3 commits.
Step 3 : git reset --hard origin/<branch_name>
Step 4 : git fetch
Hard reset your branch.
Enjoy.
I using MDaf just use this code :
DataContext db = new DataContext(ConfigurationManager.ConnectionStrings["con"].ConnectionString);
db.TruncateTable("TABLE_NAME_HERE");
//or
db.Execute("TRUNCATE TABLE TABLE_NAME_HERE ");
Bootstrap has a way of using media queries to define the different task for different sites. It uses four breakpoints.
we have extra small screen sizes which are less than 576 pixels that small in which I mean it's size from 576 to 768 pixels.
medium screen sizes take up screen size from 768 pixels up to 992 pixels large screen size from 992 pixels up to 1200 pixels.
E.g Small Text
This means that at the small screen between 576px and 768px, center the text For medium screen, change "sm" to "md" and same goes to large "lg"
does mail.exampleserver.com exist ??? , if not try the following code (you must have gmail account)
$mail->SMTPSecure = "ssl";
$mail->Host='smtp.gmail.com';
$mail->Port='465';
$mail->Username = '[email protected]'; // SMTP account username
$mail->Password = 'your gmail password';
$mail->SMTPKeepAlive = true;
$mail->Mailer = "smtp";
$mail->IsSMTP(); // telling the class to use SMTP
$mail->SMTPAuth = true; // enable SMTP authentication
$mail->CharSet = 'utf-8';
$mail->SMTPDebug = 0;
Also in the many IDEs now, ex: VSC, you can install an extension for AWS and simply click upload from there, no effort of typing all those commands + region.
Here's an example:
LATE EDIT: Starting with Java 8 you should use neither java.util.Date
nor java.sql.Date
if you can at all avoid it, and instead prefer using the java.time
package (based on Joda) rather than anything else. If you're not on Java 8, here's the original response:
java.sql.Date
- when you call methods/constructors of libraries that use it (like JDBC). Not otherwise. You don't want to introduce dependencies to the database libraries for applications/modules that don't explicitly deal with JDBC.
java.util.Date
- when using libraries that use it. Otherwise, as little as possible, for several reasons:
It's mutable, which means you have to make a defensive copy of it every time you pass it to or return it from a method.
It doesn't handle dates very well, which backwards people like yours truly, think date handling classes should.
Now, because j.u.D doesn't do it's job very well, the ghastly Calendar
classes were introduced. They are also mutable, and awful to work with, and should be avoided if you don't have any choice.
There are better alternatives, like the Joda Time API (which might even make it into Java 7 and become the new official date handling API - a quick search says it won't).
If you feel it's overkill to introduce a new dependency like Joda, long
s aren't all that bad to use for timestamp fields in objects, although I myself usually wrap them in j.u.D when passing them around, for type safety and as documentation.
WHERE
clause introduces a condition on individual rows; HAVING
clause introduces a condition on aggregations, i.e. results of selection where a single result, such as count, average, min, max, or sum, has been produced from multiple rows. Your query calls for a second kind of condition (i.e. a condition on an aggregation) hence HAVING
works correctly.
As a rule of thumb, use WHERE
before GROUP BY
and HAVING
after GROUP BY
. It is a rather primitive rule, but it is useful in more than 90% of the cases.
While you're at it, you may want to re-write your query using ANSI version of the join:
SELECT L.LectID, Fname, Lname
FROM Lecturers L
JOIN Lecturers_Specialization S ON L.LectID=S.LectID
GROUP BY L.LectID, Fname, Lname
HAVING COUNT(S.Expertise)>=ALL
(SELECT COUNT(Expertise) FROM Lecturers_Specialization GROUP BY LectID)
This would eliminate WHERE
that was used as a theta join condition.
First we grab the command output, then wrap it and select one of its properties. There is only one and its "Name" which is what we want. So we select the groups property with ".name" then output it.
to text file
(Get-ADGroupMember 'Domain Admins' |Select name).name | out-file Admins1.txt
to csv
(Get-ADGroupMember 'Domain Admins' |Select name).name | export-csv -notypeinformation "Admins1.csv"
This can happen when invoking a method that doesn't exist.
I agree with R. Pate and Todd Gardner; a std::set
might be a good idea here. Even if you're stuck using vectors, if you have enough duplicates, you might be better off creating a set to do the dirty work.
Let's compare three approaches:
Just using vector, sort + unique
sort( vec.begin(), vec.end() );
vec.erase( unique( vec.begin(), vec.end() ), vec.end() );
Convert to set (manually)
set<int> s;
unsigned size = vec.size();
for( unsigned i = 0; i < size; ++i ) s.insert( vec[i] );
vec.assign( s.begin(), s.end() );
Convert to set (using a constructor)
set<int> s( vec.begin(), vec.end() );
vec.assign( s.begin(), s.end() );
Here's how these perform as the number of duplicates changes:
Summary: when the number of duplicates is large enough, it's actually faster to convert to a set and then dump the data back into a vector.
And for some reason, doing the set conversion manually seems to be faster than using the set constructor -- at least on the toy random data that I used.
SELECT [T1].*
FROM [Table1] AS [T1]
WHERE NOT EXISTS (SELECT
1 AS [C1]
FROM [Table2] AS [T2]
WHERE ([T2].[MAKE] = [T1].[MAKE]) AND
([T2].[MODEL] = [T1].[MODEL]) AND
([T2].[Serial Number] = [T1].[Serial Number])
);
Try adding to td
:
display: -webkit-box; // to make td as block
word-break: break-word; // to make content justify
overflowed tds will align with new row.
ps
command with -p $PID
can do this:
$ ps -p 3531
PID TTY TIME CMD
3531 ? 00:03:07 emacs
in A you have used a definition of B which is not given until then , that's why the compiler is giving error .
Regarding the cygwin1.dll
not found error, a solution I have used for at least 8 years is to add the Cygwin bin directories to the end of my %PATH%
in My Computer -> Properties -> Advanced -> Environment Variables. I add them to the end of the path so in my normal work, they are searched last, minimizing the possibility of conflicts (in fact, I have had no problems with conflicts in all this time).
When you invoke the Cygwin Bash Shell, those directories get prepended to the %PATH%
so everything works as intended in that environment as well.
When not running in Cygwin shell, my %PATH%
is:
Path=c:\opt\perl\bin; \
...
C:\opt\cygwin\bin; \
C:\opt\cygwin\usr\bin; \
C:\opt\cygwin\usr\local\bin;
This way, for example, ActiveState Perl's perl is found first when I am not in a Cygwin Shell, but the Cygwin perl is found when I am working in the Cygwin Shell.
You have to parse the string as JSON (data[0] == "["
is an indication that data
is actually a string, not an object):
data = $.parseJSON(data);
$.each(data, function(i, item) {
alert(item);
});
Suppose this is your json
{
"date":"11/05/2016",
"venue": "{\"ID\":12,\"CITY\":Delhi}"
}
if you again want deserialize venue, modify json as below
{
"date":"11/05/2016",
"venue": "{\"ID\":\"12\",\"CITY\":\"Delhi\"}"
}
then try to deserialize to respective class by taking the value of venue
try putting your machine name/IP address instead of 'localhost' into URL. Works for me...
You need to use Inlines
:
<TextBlock.Inlines>
<Run FontWeight="Bold" FontSize="14" Text="This is WPF TextBlock Example. " />
<Run FontStyle="Italic" Foreground="Red" Text="This is red text. " />
</TextBlock.Inlines>
With binding:
<TextBlock.Inlines>
<Run FontWeight="Bold" FontSize="14" Text="{Binding BoldText}" />
<Run FontStyle="Italic" Foreground="Red" Text="{Binding ItalicText}" />
</TextBlock.Inlines>
You can also bind the other properties:
<TextBlock.Inlines>
<Run FontWeight="{Binding Weight}"
FontSize="{Binding Size}"
Text="{Binding LineOne}" />
<Run FontStyle="{Binding Style}"
Foreground="Binding Colour}"
Text="{Binding LineTwo}" />
</TextBlock.Inlines>
You can bind through converters if you have bold as a boolean (say).
Just adding my part to the above collection.
If you are after less code and maybe cool UI. Check out my GitHub for Progressbar for VBA
a customisable one:
The Dll is thought for MS-Access but should work in all VBA platform with minor changes. There is also an Excel file with samples. You are free to expand the vba wrappers to suit your needs.
This project is currently under development and not all errors are covered. So expect some!
You should be worried about 3rd party dlls and if you are, please feel free to use any trusted online antivirus before implementing the dll.
I used this in my code:
<div class="sticky-top h-100">
<nav id="sidebar" class="vh-100">
....
this cause your sidebar height become 100% and fixed at top.
please check this link : http://developer.android.com/guide/appendix/media-formats.html
videoview can't support some codec .
i suggested you to use mediaplayer , when get "sorry , can't play video"
Even using this won't work. I think the best solution is Browserify:
module.exports = {
func1: function () {
console.log("I am function 1");
},
func2: function () {
console.log("I am function 2");
}
};
-getFunc1.js-
var common = require('./common');
common.func1();
if you wanna execute command like this
temp=`ls -a`
echo $temp
command in `` will cause errors.
below command will solve this problem
ssh user@host '''
temp=`ls -a`
echo $temp
'''
keytool it's a binary file into the JDK folder ... just add your JDK as environment variable by adding the following line
C:\Program Files\Java\jdk1.8.0_65\bin
Revers CountDown timer with hours minutes and seconds
public void reverseTimer(int Seconds, final TextView tv) {
new CountDownTimer(Seconds * 1000 + 1000, 1000) {
public void onTick(long millisUntilFinished) {
int seconds = (int) (millisUntilFinished / 1000);
int hours = seconds / (60 * 60);
int tempMint = (seconds - (hours * 60 * 60));
int minutes = tempMint / 60;
seconds = tempMint - (minutes * 60);
tv.setText("TIME : " + String.format("%02d", hours)
+ ":" + String.format("%02d", minutes)
+ ":" + String.format("%02d", seconds));
}
public void onFinish() {
tv.setText("Completed");
}
}.start();
}
Brant's solution is absolutely correct, but I needed to modify it to make it work with multiple select checkboxes and commit=false
. Here is my solution:
models.py
class Choices(models.Model):
description = models.CharField(max_length=300)
class Profile(models.Model):
user = models.ForeignKey(User, blank=True, unique=True, verbose_name_('user'))
the_choices = models.ManyToManyField(Choices)
forms.py
class ProfileForm(forms.ModelForm):
the_choices = forms.ModelMultipleChoiceField(queryset=Choices.objects.all(), required=False, widget=forms.CheckboxSelectMultiple)
class Meta:
model = Profile
exclude = ['user']
views.py
if request.method=='POST':
form = ProfileForm(request.POST)
if form.is_valid():
profile = form.save(commit=False)
profile.user = request.user
profile.save()
form.save_m2m() # needed since using commit=False
else:
form = ProfileForm()
return render_to_response(template_name, {"profile_form": form}, context_instance=RequestContext(request))
I hope this complete example will help you.
This is the TaxiInfo class which holds information about a taxi ride:
namespace Taxi.Models
{
public class TaxiInfo
{
public String Driver { get; set; }
public Double Fare { get; set; }
public Double Distance { get; set; }
public String StartLocation { get; set; }
public String EndLocation { get; set; }
}
}
We also have a convenience model which holds a List of TaxiInfo(s):
namespace Taxi.Models
{
public class TaxiInfoSet
{
public List<TaxiInfo> TaxiInfoList { get; set; }
public TaxiInfoSet(params TaxiInfo[] TaxiInfos)
{
TaxiInfoList = new List<TaxiInfo>();
foreach(var TaxiInfo in TaxiInfos)
{
TaxiInfoList.Add(TaxiInfo);
}
}
}
}
Now in the home controller we have the default Index action which for this example makes two taxi drivers and adds them to the list contained in a TaxiInfo:
public ActionResult Index()
{
var taxi1 = new TaxiInfo() { Fare = 20.2, Distance = 15, Driver = "Billy", StartLocation = "Perth", EndLocation = "Brisbane" };
var taxi2 = new TaxiInfo() { Fare = 2339.2, Distance = 1500, Driver = "Smith", StartLocation = "Perth", EndLocation = "America" };
return View(new TaxiInfoSet(taxi1,taxi2));
}
The code for the view is as follows:
@model Taxi.Models.TaxiInfoSet
@{
ViewBag.Title = "Index";
}
<h2>Index</h2>
@foreach(var TaxiInfo in Model.TaxiInfoList){
<form>
<h1>Cost: [email protected]</h1>
<h2>Distance: @(TaxiInfo.Distance) km</h2>
<p>
Our diver, @TaxiInfo.Driver will take you from @TaxiInfo.StartLocation to @TaxiInfo.EndLocation
</p>
@Html.ActionLink("Home","Booking",TaxiInfo)
</form>
}
The ActionLink is responsible for the re-directing to the booking action of the Home controller (and passing in the appropriate TaxiInfo object) which is defiend as follows:
public ActionResult Booking(TaxiInfo Taxi)
{
return View(Taxi);
}
This returns a the following view:
@model Taxi.Models.TaxiInfo
@{
ViewBag.Title = "Booking";
}
<h2>Booking For</h2>
<h1>@Model.Driver, going from @Model.StartLocation to @Model.EndLocation (a total of @Model.Distance km) for [email protected]</h1>
A visual tour:
You have no combinator (space, >
, +
...) so no children will get involved, ever.
However, you could avoid the need for jQuery by using an ID
and getElementById
, or you could use the old getElementsByName("frmSave")[0]
or the even older document.forms['frmSave']
. jQuery is unnecessary here.
Using river can present issues when your operation scales up. River will use a ton of memory when under heavy operation. I recommend implementing your own elasticsearch models, or if you're using mongoose you can build your elasticsearch models right into that or use mongoosastic which essentially does this for you.
Another disadvantage to Mongodb River is that you'll be stuck using mongodb 2.4.x branch, and ElasticSearch 0.90.x. You'll start to find that you're missing out on a lot of really nice features, and the mongodb river project just doesn't produce a usable product fast enough to keep stable. That said Mongodb River is definitely not something I'd go into production with. It's posed more problems than its worth. It will randomly drop write under heavy load, it will consume lots of memory, and there's no setting to cap that. Additionally, river doesn't update in realtime, it reads oplogs from mongodb, and this can delay updates for as long as 5 minutes in my experience.
We recently had to rewrite a large portion of our project, because its a weekly occurrence that something goes wrong with ElasticSearch. We had even gone as far as to hire a Dev Ops consultant, who also agrees that its best to move away from River.
UPDATE: Elasticsearch-mongodb-river now supports ES v1.4.0 and mongodb v2.6.x. However, you'll still likely run into performance problems on heavy insert/update operations as this plugin will try to read mongodb's oplogs to sync. If there are a lot of operations since the lock(or latch rather) unlocks, you'll notice extremely high memory usage on your elasticsearch server. If you plan on having a large operation, river is not a good option. The developers of ElasticSearch still recommend you to manage your own indexes by communicating directly with their API using the client library for your language, rather than using river. This isn't really the purpose of river. Twitter-river is a great example of how river should be used. Its essentially a great way to source data from outside sources, but not very reliable for high traffic or internal use.
Also consider that mongodb-river falls behind in version, as its not maintained by ElasticSearch Organization, its maintained by a thirdparty. Development was stuck on v0.90 branch for a long time after the release of v1.0, and when a version for v1.0 was released it wasn't stable until elasticsearch released v1.3.0. Mongodb versions also fall behind. You may find yourself in a tight spot when you're looking to move to a later version of each, especially with ElasticSearch under such heavy development, with many very anticipated features on the way. Staying up on the latest ElasticSearch has been very important as we rely heavily on constantly improving our search functionality as its a core part of our product.
All in all you'll likely get a better product if you do it yourself. Its not that difficult. Its just another database to manage in your code, and it can easily be dropped in to your existing models without major refactoring.
Here is the split function I use:
--
-- split function
-- s : string to split
-- del : delimiter
-- i : index requested
--
DROP FUNCTION IF EXISTS SPLIT_STRING;
DELIMITER $
CREATE FUNCTION
SPLIT_STRING ( s VARCHAR(1024) , del CHAR(1) , i INT)
RETURNS VARCHAR(1024)
DETERMINISTIC -- always returns same results for same input parameters
BEGIN
DECLARE n INT ;
-- get max number of items
SET n = LENGTH(s) - LENGTH(REPLACE(s, del, '')) + 1;
IF i > n THEN
RETURN NULL ;
ELSE
RETURN SUBSTRING_INDEX(SUBSTRING_INDEX(s, del, i) , del , -1 ) ;
END IF;
END
$
DELIMITER ;
SET @agg = "G1;G2;G3;G4;" ;
SELECT SPLIT_STRING(@agg,';',1) ;
SELECT SPLIT_STRING(@agg,';',2) ;
SELECT SPLIT_STRING(@agg,';',3) ;
SELECT SPLIT_STRING(@agg,';',4) ;
SELECT SPLIT_STRING(@agg,';',5) ;
SELECT SPLIT_STRING(@agg,';',6) ;
Instructions telling sudo pip install
are inherently wrong.
If there is any tutorial out there which says you should do sudo pip
then please file a bug against this package. The author is dis-educating Python community, as time has proven sudo pip
to be a broken practice.
OSX El Capitan introduced a mechanisms to prevent damaging the operating system files. /System/Library/Frameworks/Python.framework/Versions/2.7/share
is one of the protected locations. A normal user has no reason to put or write any files there. This is because the operating system itself relies on these files and sudo pip
, with all force given from the above, would unconditionally overwrite them. Usually bad things would not happen, but the chances are there. Apple wants to protect their OS users to accidentally bricking their installation.
Instead, you need to install a Python package, like IPython, locally to the home folder of your user. The easiest way is to create a virtual environment, activate it and then run pip in the virtual environment.
Example:
cd ~ # Go to home directory
virtualenv my-venv
source my-venv/bin/activate
pip install IPython
More info
Alternatively, one should be able to do pip install --user
. But again, no sudo needed and you need to manually set up PATH
environment variable.
HttpClient.get()
applies res.json()
automatically and returns Observable<HttpResponse<string>>
. You no longer need to call this function yourself.
OK, seems this is my final answer. We have 2 actual problems:
1. Print POSIX ID (pthread_t)
You can simply treat pthread_t as array of bytes with hex digits printed for each byte. So you aren't limited by some fixed size type. The only issue is byte order. You probably like if order of your printed bytes is the same as for simple "int" printed. Here is example for little-endian and only order should be reverted (under define?) for big-endian:
#include <pthread.h>
#include <stdio.h>
void print_thread_id(pthread_t id)
{
size_t i;
for (i = sizeof(i); i; --i)
printf("%02x", *(((unsigned char*) &id) + i - 1));
}
int main()
{
pthread_t id = pthread_self();
printf("%08x\n", id);
print_thread_id(id);
return 0;
}
2. Get shorter printable thread ID
In any of proposed cases you should translate real thread ID (posix) to index of some table. But there is 2 significantly different approaches:
2.1. Track threads.
You may track threads ID of all the existing threads in table (their pthread_create() calls should be wrapped) and have "overloaded" id function that get you just table index, not real thread ID. This scheme is also very useful for any internal thread-related debug an resources tracking. Obvious advantage is side effect of thread-level trace / debug facility with future extension possible. Disadvantage is requirement to track any thread creation / destruction.
Here is partial pseudocode example:
pthread_create_wrapper(...)
{
id = pthread_create(...)
add_thread(id);
}
pthread_destruction_wrapper()
{
/* Main problem is it should be called.
pthread_cleanup_*() calls are possible solution. */
remove_thread(pthread_self());
}
unsigned thread_id(pthread_t known_pthread_id)
{
return seatch_thread_index(known_pthread_id);
}
/* user code */
printf("04x", thread_id(pthread_self()));
2.2. Just register new thread ID.
During logging call pthread_self() and search internal table if it know thread. If thread with such ID was created its index is used (or re-used from previously thread, actually it doesn't matter as there are no 2 same IDs for the same moment). If thread ID is not known yet, new entry is created so new index is generated / used.
Advantage is simplicity. Disadvantage is no tracking of thread creation / destruction. So to track this some external mechanics is required.
You could also try string addition:
print " "+'"'+'a word that needs quotation marks'+'"'
If you want to split a string into words, you can use explode() or str_word_count().
As to why this still exists - MS doesn't consider it a priority, and values backwards compatibility over advancing their OS (at least in this instance).
A workaround I use is to use the "short names" for the directories in the path, instead of their standard, human-readable versions. So e.g. for C:\Program Files\
I would use C:\PROGRA~1\
You can find the short name equivalents using dir /x
.
use the following inside the body tag
<body onclick="theFunction(event)">
then use in javascript the following function to get the ID
<script>
function theFunction(e)
{ alert(e.target.id);}
@sfussenegger's answer explains how to make this work. But I'd say don't do it!
Experienced Java programmers use, and expect to see
System.out.println(...);
and not
out.println(...);
A static import of System.out or System.err is (IMO) bad style because:
If you find yourself doing lots of output to System.out or System.err, I think it is a better to abstract the streams into attributes, local variables or methods. This will make your application more reusable.
I have actually followed this example and it worked for me :)
NameVirtualHost *:80
<VirtualHost *:80>
ServerName mysite.example.com
Redirect permanent / https://mysite.example.com/
</VirtualHost>
<VirtualHost _default_:443>
ServerName mysite.example.com
DocumentRoot /usr/local/apache2/htdocs
SSLEngine On
# etc...
</VirtualHost>
Then do:
/etc/init.d/httpd restart
This one helped me. Try creating a new folder, if your MongoDB is installed in C:\Program Files the folder should be called db and in a folder data. C:\data\db
When you start the mongod there should be a log where the db 'isnt found'.
SELECT *
FROM LogRequests
WHERE cast(dateX as date) between '2014-05-09' and '2014-05-10';
This will select all the data between the 2 dates
As Mingyu pointed out, there is a problem in formatting. Other than that, I would strongly recommend not using the Derived class's name while calling super()
since it makes your code inflexible (code maintenance and inheritance issues). In Python 3, Use super().__init__
instead. Here is the code after incorporating these changes :
class Car(object):
condition = "new"
def __init__(self, model, color, mpg):
self.model = model
self.color = color
self.mpg = mpg
class ElectricCar(Car):
def __init__(self, battery_type, model, color, mpg):
self.battery_type=battery_type
super().__init__(model, color, mpg)
Thanks to Erwin Mayer for pointing out the issue in using __class__
with super()
If you want to do remote debugging (for CGI or if you don't want to mess output with debug command line), use this:
Given test:
use v5.14;
say 1;
say 2;
say 3;
Start a listener on whatever host and port on terminal 1 (here localhost:12345
):
$ nc -v -l localhost -p 12345
For readline support use rlwrap (you can use on perl -d
too):
$ rlwrap nc -v -l localhost -p 12345
And start the test on another terminal (say terminal 2):
$ PERLDB_OPTS="RemotePort=localhost:12345" perl -d test
Input/Output on terminal 1:
Connection from 127.0.0.1:42994
Loading DB routines from perl5db.pl version 1.49
Editor support available.
Enter h or 'h h' for help, or 'man perldebug' for more help.
main::(test:2): say 1;
DB<1> n
main::(test:3): say 2;
DB<1> select $DB::OUT
DB<2> n
2
main::(test:4): say 3;
DB<2> n
3
Debugged program terminated. Use q to quit or R to restart,
use o inhibit_exit to avoid stopping after program termination,
h q, h R or h o to get additional info.
DB<2>
Output on terminal 2:
1
Note the sentence if you want output on debug terminal
select $DB::OUT
If you are Vim user, install this plugin: dbg.vim which provides basic support for Perl.
I found a solution to this also. This page helped me today so, I am re-posting here too.
/** This is the script that will redraw current screen and submit to paypal. */
echo '<script>'."\n" ;
echo 'function serverNotifySelected()'."\n" ;
echo '{'."\n" ;
echo ' window.open(\'\', \'PayPalPayment\');'."\n" ;
echo ' document.forms[\'paypal_form\'].submit();'."\n" ;
echo ' document.forms[\'server_responder\'].submit();'."\n" ;
echo '}'."\n" ;
echo '</script>'."\n" ;
/** This form will be opened in a new window called PayPalPayment. */
echo '<form action="https://www.sandbox.paypal.com/cgi-bin/webscr" name="paypal_form" method="post" target="PayPalPayment">'."\n" ;
echo '<input type="hidden" name="cmd" value="_s-xclick">'."\n" ;
echo '<input type="hidden" name="custom" value="'.$transaction_start.'">'."\n" ;
echo '<input type="hidden" name="hosted_button_id" value="'.$single_product->hosted_button_id.'">'."\n" ;
echo '<table>'."\n" ;
echo ' <tr>'."\n";
echo ' <td><input type="hidden" name="'.$single_product->hide_name_a.'" value="'.$single_product->hide_value_a.'">Local</td>'."\n" ;
echo ' </tr>'."\n" ;
echo ' <tr>'."\n" ;
echo ' <td>'."\n" ;
echo ' <input type="hidden" name="'.$single_product->hide_name_b.'" value="'.$single_product->hide_value_b.'" />'.$single_product->short_desc.' $'.$adj_price.' USD'."\n" ;
// <select name="os0">
// <option value="1 Day">1 Day $1.55 USD</option>
// <option value="All Day">All Day $7.50 USD</option>
// <option value="3 Day">3 Day $23.00 USD</option>
// <option value="31 Day">31 Day $107.00 USD</option>
// </select>
echo ' </td>'."\n" ;
echo ' </tr>'."\n" ;
echo '</table>'."\n" ;
echo '<input type="hidden" name="currency_code" value="USD">'."\n" ;
echo '</form>'."\n" ;
/** This form will redraw the current page for approval. */
echo '<form action="ProductApprove.php" name="server_responder" method="post" target="_top">'."\n" ;
echo '<input type="hidden" name="trans" value="'.$transaction_start.'">'."\n" ;
echo '<input type="hidden" name="prod_id" value="'.$this->product_id.'">'."\n" ;
echo '</form>'."\n" ;
/** No form here just an input and a button. onClick will handle all the forms */
echo '<input type="image" src="https://www.sandbox.paypal.com/en_US/i/btn/btn_buynowCC_LG.gif" border="0" alt="PayPal - The safer, easier way to pay online!" onclick="serverNotifySelected()">'."\n" ;
echo '<img alt="" border="0" src="https://www.sandbox.paypal.com/en_US/i/scr/pixel.gif" width="1" height="1">'."\n" ;
The above code is the code for one button. You press the button and it will redraw the current screen from purchase to pre-approval. At the same time it opens a new window and hands that new window over to PayPal.
NO
override func willMove(toParentViewController parent: UIViewController?) { }
This will get called even if you are segueing to the view controller in which you are overriding this method. In which check if the "parent
" is nil
of not is not a precise way to be sure of moving back to the correct UIViewController
. To determine exactly if the UINavigationController
is properly navigating back to the UIViewController
that presented this current one, you will need to conform to the UINavigationControllerDelegate
protocol.
YES
note: MyViewController
is just the name of whatever UIViewController
you want to detect going back from.
1) At the top of your file add UINavigationControllerDelegate
.
class MyViewController: UIViewController, UINavigationControllerDelegate {
2) Add a property to your class that will keep track of the UIViewController
that you are segueing from.
class MyViewController: UIViewController, UINavigationControllerDelegate {
var previousViewController:UIViewController
3) in MyViewController
's viewDidLoad
method assign self
as the delegate for your UINavigationController
.
override func viewDidLoad() {
super.viewDidLoad()
self.navigationController?.delegate = self
}
3) Before you segue, assign the previous UIViewController
as this property.
// In previous UIViewController
override func prepare(for segue: UIStoryboardSegue, sender: Any?) {
if segue.identifier == "YourSegueID" {
if let nextViewController = segue.destination as? MyViewController {
nextViewController.previousViewController = self
}
}
}
4) And conform to one method in MyViewController
of the UINavigationControllerDelegate
func navigationController(_ navigationController: UINavigationController, willShow viewController: UIViewController, animated: Bool) {
if viewController == self.previousViewController {
// You are going back
}
}
Go to
Tools > Compatibility View settings > Uncheck the option "Display intranet sites in Compatibility View"
.
Click on Close
. It may re-launch the page and then your problem would be resolved.
Another approach, if you're desperate and don't have access to (a) the code or (b) the command line, then you can use environment variables:
http://docs.oracle.com/javase/7/docs/webnotes/tsg/TSG-Desktop/html/plugin.html.
Specifically for java web start set the environment variable:
JAVAWS_VM_ARGS
and for applets:
_JPI_VM_OPTIONS
e.g.
_JPI_VM_OPTIONS=-Djava.net.preferIPv4Stack=true
Additionally, under Windows global options (for general Java applications) can be set in the Java control plan page under the "Java" tab.
If you are using localhost in your url and testing your application in emulator , simply you can replace system's ip address for localhost in the URL.or you can use 10.0.2.2 instead of localhost.
http://localhost/webservice.php to http://10.218.28.19/webservice.php
Where 10.218.28.19 -> System's IP Address.
or
http://localhost/webservice.php to http://10.0.2.2/webservice.php
Please use git config credential.helper store
if your site is using TLS/SSL.
Hope this works
System.out is "standard output" (stdout) and System.err is "error output" (stderr). Along with System.in (stdin), these are the three standard I/O streams in the Unix model. Most modern programming environments (C, Perl, etc.) support this model.
The standard output stream is used to print output from "normal operations" of the program, while the error stream is for "error messages". These need to be separate -- though in most cases they appear on the same console.
Suppose you have a simple program where you enter a phone number and it prints out the person who has that number. If you enter an invalid number, the program should inform you of that error, but it shouldn't do that as the answer: If you enter "999-ABC-4567" and the program prints an error message "Not a valid number", that doesn't mean there is a person named "Not a valid number" whose number is 999-ABC-4567. So it prints out nothing to the standard output, and the message "Not a valid number" is printed to the error output.
You can set up the execution environment to distinguish between the two streams, for example, make the standard output print to the screen and error output print to a file.
MSYS has not been updated a long time, MSYS2 is more active, you can download from MSYS2, it has both mingw
and cygwin fork
package.
To install the MinGW-w64 toolchain (Reference):
pacman -Sy pacman
to update the package databasepacman -Syu
to update the package database and core system packagespacman -Su
to update the restpacman -S mingw-w64-i686-toolchain
pacman -S mingw-w64-x86_64-toolchain
make
, run pacman -S make
Copy all the (''.ipynb) files in the Desired folder then execute:
import os
desired_path = 'C:\\Users\\Docs\\Ipynb Covertor'
os.chdir(desired_path)
list_of_directory = os.listdir(desired_path)
for file in list_of_directory:
os.system('ipython nbconvert --to script ' + str(file))
Underscore.js provides a function for this:
_.escape(string)
Escapes a string for insertion into HTML, replacing &, <, >, ", and ' characters.
http://underscorejs.org/#escape
It's not a built-in Javascript function, but if you are already using Underscore it is a better alternative than writing your own function if your strings to convert are not too large.
Use .net inbuilt class JavaScriptSerializer
JavaScriptSerializer js = new JavaScriptSerializer();
string json = js.Serialize(obj);
Just check my Code and Sniper and demo link :
// Basice Code keep it
$(document).ready(function () {
$(document).on("scroll", onScroll);
//smoothscroll
$('a[href^="#"]').on('click', function (e) {
e.preventDefault();
$(document).off("scroll");
$('a').each(function () {
$(this).removeClass('active');
})
$(this).addClass('active');
var target = this.hash,
menu = target;
$target = $(target);
$('html, body').stop().animate({
'scrollTop': $target.offset().top+2
}, 500, 'swing', function () {
window.location.hash = target;
$(document).on("scroll", onScroll);
});
});
});
// Use Your Class or ID For Selection
function onScroll(event){
var scrollPos = $(document).scrollTop();
$('#menu-center a').each(function () {
var currLink = $(this);
var refElement = $(currLink.attr("href"));
if (refElement.position().top <= scrollPos && refElement.position().top + refElement.height() > scrollPos) {
$('#menu-center ul li a').removeClass("active");
currLink.addClass("active");
}
else{
currLink.removeClass("active");
}
});
}
$(document).ready(function () {_x000D_
$(document).on("scroll", onScroll);_x000D_
_x000D_
//smoothscroll_x000D_
$('a[href^="#"]').on('click', function (e) {_x000D_
e.preventDefault();_x000D_
$(document).off("scroll");_x000D_
_x000D_
$('a').each(function () {_x000D_
$(this).removeClass('active');_x000D_
})_x000D_
$(this).addClass('active');_x000D_
_x000D_
var target = this.hash,_x000D_
menu = target;_x000D_
$target = $(target);_x000D_
$('html, body').stop().animate({_x000D_
'scrollTop': $target.offset().top+2_x000D_
}, 500, 'swing', function () {_x000D_
window.location.hash = target;_x000D_
$(document).on("scroll", onScroll);_x000D_
});_x000D_
});_x000D_
});_x000D_
_x000D_
function onScroll(event){_x000D_
var scrollPos = $(document).scrollTop();_x000D_
$('#menu-center a').each(function () {_x000D_
var currLink = $(this);_x000D_
var refElement = $(currLink.attr("href"));_x000D_
if (refElement.position().top <= scrollPos && refElement.position().top + refElement.height() > scrollPos) {_x000D_
$('#menu-center ul li a').removeClass("active");_x000D_
currLink.addClass("active");_x000D_
}_x000D_
else{_x000D_
currLink.removeClass("active");_x000D_
}_x000D_
});_x000D_
}
_x000D_
body, html {_x000D_
margin: 0;_x000D_
padding: 0;_x000D_
height: 100%;_x000D_
width: 100%;_x000D_
}_x000D_
.menu {_x000D_
width: 100%;_x000D_
height: 75px;_x000D_
background-color: rgba(0, 0, 0, 1);_x000D_
position: fixed;_x000D_
background-color:rgba(4, 180, 49, 0.6);_x000D_
-webkit-transition: all 0.4s ease;_x000D_
-moz-transition: all 0.4s ease;_x000D_
-o-transition: all 0.4s ease;_x000D_
transition: all 0.4s ease;_x000D_
}_x000D_
.light-menu {_x000D_
width: 100%;_x000D_
height: 75px;_x000D_
background-color: rgba(255, 255, 255, 1);_x000D_
position: fixed;_x000D_
background-color:rgba(4, 180, 49, 0.6);_x000D_
-webkit-transition: all 0.4s ease;_x000D_
-moz-transition: all 0.4s ease;_x000D_
-o-transition: all 0.4s ease;_x000D_
transition: all 0.4s ease;_x000D_
}_x000D_
#menu-center {_x000D_
width: 980px;_x000D_
height: 75px;_x000D_
margin: 0 auto;_x000D_
}_x000D_
#menu-center ul {_x000D_
margin: 0 0 0 0;_x000D_
}_x000D_
#menu-center ul li a{_x000D_
padding: 32px 40px;_x000D_
}_x000D_
#menu-center ul li {_x000D_
list-style: none;_x000D_
margin: 0 0 0 -4px;_x000D_
display: inline;_x000D_
_x000D_
}_x000D_
.active, #menu-center ul li a:hover {_x000D_
font-family:'Droid Sans', serif;_x000D_
font-size: 14px;_x000D_
color: #fff;_x000D_
text-decoration: none;_x000D_
line-height: 50px;_x000D_
background-color: rgba(0, 0, 0, 0.12);_x000D_
padding: 32px 40px;_x000D_
_x000D_
}_x000D_
a {_x000D_
font-family:'Droid Sans', serif;_x000D_
font-size: 14px;_x000D_
color: black;_x000D_
text-decoration: none;_x000D_
line-height: 72px;_x000D_
}_x000D_
#home {_x000D_
background-color: #286090;_x000D_
height: 100vh;_x000D_
width: 100%;_x000D_
overflow: hidden;_x000D_
}_x000D_
#portfolio {_x000D_
background: gray; _x000D_
height: 100vh;_x000D_
width: 100%;_x000D_
}_x000D_
#about {_x000D_
background-color: blue;_x000D_
height: 100vh;_x000D_
width: 100%;_x000D_
}_x000D_
#contact {_x000D_
background-color: rgb(154, 45, 45);_x000D_
height: 100vh;_x000D_
width: 100%;_x000D_
}
_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<!-- <div class="container"> --->_x000D_
<div class="m1 menu">_x000D_
<div id="menu-center">_x000D_
<ul>_x000D_
<li><a class="active" href="#home">Home</a>_x000D_
_x000D_
</li>_x000D_
<li><a href="#portfolio">Portfolio</a>_x000D_
_x000D_
</li>_x000D_
<li><a href="#about">About</a>_x000D_
_x000D_
</li>_x000D_
<li><a href="#contact">Contact</a>_x000D_
_x000D_
</li>_x000D_
</ul>_x000D_
</div>_x000D_
</div>_x000D_
<div id="home"></div>_x000D_
<div id="portfolio"></div>_x000D_
<div id="about"></div>_x000D_
<div id="contact"></div>
_x000D_
You can do this very easily in Swift using the code:
let string = "hello Swift";
let subString = (string as NSString).containsString("Swift")
if(subString){println("Exist")}
build gradle:
testImplementation "com.nhaarman.mockitokotlin2:mockito-kotlin:2.2.0"
code:
interface MyCallback {
fun someMethod(value: String)
}
class MyTestableManager(private val callback: MyCallback){
fun perform(){
callback.someMethod("first")
callback.someMethod("second")
callback.someMethod("third")
}
}
test:
import com.nhaarman.mockitokotlin2.times
import com.nhaarman.mockitokotlin2.verify
import com.nhaarman.mockitokotlin2.mock
...
val callback: MyCallback = mock()
val manager = MyTestableManager(callback)
manager.perform()
val captor: KArgumentCaptor<String> = com.nhaarman.mockitokotlin2.argumentCaptor<String>()
verify(callback, times(3)).someMethod(captor.capture())
assertTrue(captor.allValues[0] == "first")
assertTrue(captor.allValues[1] == "second")
assertTrue(captor.allValues[2] == "third")
There is a difference between early performance optimization and using a best practice type of rule. If you are creating new tables where you will always have a fixed length field, it makes sense to use CHAR, you should be using it in that case. This isn't early optimization, but rather implementing a rule of thumb (or best practice).
i.e. - If you have a 2 letter state field, use CHAR(2). If you have a field with the actual state names, use VARCHAR.
jQuery.fn.extend({
getStyles: function() {
var rulesUsed = [];
var sheets = document.styleSheets;
for (var c = 0; c < sheets.length; c++) {
var rules = sheets[c].rules || sheets[c].cssRules;
for (var r = 0; r < rules.length; r++) {
var selectorText = rules[r].selectorText.toLowerCase().replace(":hover","");
if (this.is(selectorText) || this.find(selectorText).length > 0) {
rulesUsed.push(rules[r]);
}
}
}
var style = rulesUsed.map(function(cssRule) {
return cssRule.selectorText.toLowerCase() + ' { ' + cssRule.style.cssText.toLowerCase() + ' }';
}).join("\n");
return style;
}
});
usage:
$("#login_wrapper").getStyles()
If this is your detail.html
I don't see where do you load detail.js
?
Maybe this
<script src="js/index.js"></script>
should be this
<script src="js/detail.js"></script>
?
if
...
# several checks
...
elif ((var1 > 65535) or ((var1 < 1024)) and (var1 != 80) and (var1 != 443)):
# fail
else
...
You missed a parenthesis.
To inspect your localStorage items you may type console.log(localStorage);
in your javascript console (firebug for example or in new FF versions the shipped js console).
You can use this line of Code to get rid of the browsers localStorage contents. Just execute it in your javascript console:
localStorage.clear();
When the color of text is dark, in Safari and Chrome, I have better result with the text-stroke css property.
-webkit-text-stroke: 0.5px #000;
I didn't find any example explicit enough for me on how to use java.util.function.Function
for simple method as parameter function. Here is a simple example:
import java.util.function.Function;
public class Foo {
private Foo(String parameter) {
System.out.println("I'm a Foo " + parameter);
}
public static Foo method(final String parameter) {
return new Foo(parameter);
}
private static Function parametrisedMethod(Function<String, Foo> function) {
return function;
}
public static void main(String[] args) {
parametrisedMethod(Foo::method).apply("from a method");
}
}
Basically you have a Foo
object with a default constructor. A method
that will be called as a parameter from the parametrisedMethod
which is of type Function<String, Foo>
.
Function<String, Foo>
means that the function takes a String
as parameter and return a Foo
.Foo::Method
correspond to a lambda like x -> Foo.method(x);
parametrisedMethod(Foo::method)
could be seen as x -> parametrisedMethod(Foo.method(x))
.apply("from a method")
is basically to do parametrisedMethod(Foo.method("from a method"))
Which will then return in the output:
>> I'm a Foo from a method
The example should be running as is, you can then try more complicated stuff from the above answers with different classes and interfaces.
You can use json2csharp.com to Convert your json to object model
var model = JsonConvert.DeserializeObject<RootObject>(json);
using NewtonJsonHere, It will generate something like this:
public class MatrixModel
{
public class Option
{
public string text { get; set; }
public string selectedMarks { get; set; }
}
public class Model
{
public List<Option> options { get; set; }
public int maxOptions { get; set; }
public int minOptions { get; set; }
public bool isAnswerRequired { get; set; }
public string selectedOption { get; set; }
public string answerText { get; set; }
public bool isRangeType { get; set; }
public string from { get; set; }
public string to { get; set; }
public string mins { get; set; }
public string secs { get; set; }
}
public class Question
{
public int QuestionId { get; set; }
public string QuestionText { get; set; }
public int TypeId { get; set; }
public string TypeName { get; set; }
public Model Model { get; set; }
}
public class RootObject
{
public Question Question { get; set; }
public string CheckType { get; set; }
public string S1 { get; set; }
public string S2 { get; set; }
public string S3 { get; set; }
public string S4 { get; set; }
public string S5 { get; set; }
public string S6 { get; set; }
public string S7 { get; set; }
public string S8 { get; set; }
public string S9 { get; set; }
public string S10 { get; set; }
public string ScoreIfNoMatch { get; set; }
}
}
Then you can deserialize as:
var model = JsonConvert.DeserializeObject<List<MatrixModel.RootObject>>(json);
I've also the same problem, in Xcode 7.2
It solved by followings steps:-
1) Open Xcode preference,
2) Select the appropriate team,
3) Click the "View Details..".
4) In section "Signing Identities": click on "Reset" for each of them.
5) In section "Provisioning Profiles". Click on "Download All".
6) Click on "Done."
7) Go in Xcode, build settings, select it. In General tab, the issues should get removed.
8) Restart the Xcode.
9) Do the Final build.
That's all.
& "C:\Program Files\Automated QA\TestExecute 8\Bin\TestExecute.exe" C:\temp\TestProject1\TestProject1.pjs /run /exit /SilentMode
or
[System.Diagnostics.Process]::Start("C:\Program Files\Automated QA\TestExecute 8\Bin\TestExecute.exe", "C:\temp\TestProject1\TestProject1.pjs /run /exit /SilentMode")
UPDATE: sorry I missed "(I invoked the command using the "&" operator)" sentence. I had this problem when I was evaluating the path dynamically. Try Invoke-Expression construction:
Invoke-Expression "& `"C:\Program Files\Automated QA\TestExecute 8\Bin\TestExecute.exe`" C:\temp\TestProject1\TestProject1.pjs /run /exit /SilentMode"
I'm working with tables adding new elements dynamically to them, and when using on(), the only way of making it works for me is using a non-dynamic parent as:
<table id="myTable">
<tr>
<td></td> // Dynamically created
<td></td> // Dynamically created
<td></td> // Dynamically created
</tr>
</table>
<input id="myButton" type="button" value="Push me!">
<script>
$('#myButton').click(function() {
$('#myTable tr').append('<td></td>');
});
$('#myTable').on('click', 'td', function() {
// Your amazing code here!
});
</script>
This is really useful because, to remove events bound with on(), you can use off(), and to use events once, you can use one().
I had to go this route on Ubuntu 16.04.1 LTS. It is somewhat of a mix of some of the other answers above - but none of them helped. I spent an hour or more trying all other suggestions from MySql website to everything on SO, I finally got it working with:
Note: while it showed Enter password for user root, I didnt have the original password so I just entered the same password to be used as the new password.
Note: there was no /var/log/mysqld.log only /var/log/mysql/error.log
Also note this did not work for me:
sudo dpkg-reconfigure mysql-server-5.7
Nor did:
sudo dpkg-reconfigure --force mysql-server-5.5
Make MySQL service directory.
sudo mkdir /var/run/mysqld
Give MySQL user permission to write to the service directory.
sudo chown mysql: /var/run/mysqld
Then:
run /usr/bin/mysql_secure_installation
Output from mysql_secure_installation
root@myServer:~# /usr/bin/mysql_secure_installation
Securing the MySQL server deployment.
Enter password for user root:
VALIDATE PASSWORD PLUGIN can be used to test passwords and improve security. It checks the strength of password and allows the users to set only those passwords which are secure enough. Would you like to setup VALIDATE PASSWORD plugin?
Press y|Y for Yes, any other key for No: no Using existing password for root. Change the password for root ? ((Press y|Y for Yes, any other key for No) : y
New password:
Re-enter new password: By default, a MySQL installation has an anonymous user, allowing anyone to log into MySQL without having to have a user account created for them. This is intended only for testing, and to make the installation go a bit smoother. You should remove them before moving into a production environment.
Remove anonymous users? (Press y|Y for Yes, any other key for No) : y Success.
Normally, root should only be allowed to connect from 'localhost'. This ensures that someone cannot guess at the root password from the network.
Disallow root login remotely? (Press y|Y for Yes, any other key for No) : y Success.
By default, MySQL comes with a database named 'test' that anyone can access. This is also intended only for testing, and should be removed before moving into a production environment.
Remove test database and access to it? (Press y|Y for Yes, any other key for No) : y
Dropping test database... Success.
Removing privileges on test database... Success.
Reloading the privilege tables will ensure that all changes made so far will take effect immediately.
Reload privilege tables now? (Press y|Y for Yes, any other key for No) : y Success.
All done!
Assuming you are calling this in an Activity class
Bitmap bm = BitmapFactory.decodeResource(getResources(), R.drawable.image);
The first parameter, Resources, is required. It is normally obtainable in any Context (and subclasses like Activity).
Have a look at CASE statements
http://msdn.microsoft.com/en-us/library/ms181765.aspx
This work for me in .NET Core 3.1.
But not in .NET 5 preview 7.
using System;
using System.Security.Cryptography;
using System.Text;
namespace PortalAplicaciones.Shared.Models
{
public class Encriptar
{
public static string EncriptaPassWord(string Password)
{
try
{
SHA256Managed hasher = new SHA256Managed();
byte[] pwdBytes = new UTF8Encoding().GetBytes(Password);
byte[] keyBytes = hasher.ComputeHash(pwdBytes);
hasher.Dispose();
return Convert.ToBase64String(keyBytes);
}
catch (Exception ex)
{
throw new Exception(ex.Message, ex);
}
}
}
}
I'm not sure this is a right way but I solved it by adding display: inline-block;
to the wrapper div.
#wrapper{
display: inline-block;
/*border: 1px black solid;*/
width: 75%;
min-width: 800px;
}
.content{
text-align: justify;
float: right;
width: 90%;
}
.lbar{
text-align: justify;
float: left;
width: 10%;
}
Here is the function which help you
private void saveBitmap(Bitmap bitmap,String path){
if(bitmap!=null){
try {
FileOutputStream outputStream = null;
try {
outputStream = new FileOutputStream(path); //here is set your file path where you want to save or also here you can set file object directly
bitmap.compress(Bitmap.CompressFormat.PNG, 100, outputStream); // bitmap is your Bitmap instance, if you want to compress it you can compress reduce percentage
// PNG is a lossless format, the compression factor (100) is ignored
} catch (Exception e) {
e.printStackTrace();
} finally {
try {
if (outputStream != null) {
outputStream.close();
}
} catch (IOException e) {
e.printStackTrace();
}
}
} catch (Exception e) {
e.printStackTrace();
}
}
}
You can use the sprintf
method, however the arg
method is preferred as it supports unicode.
QString str;
str.sprintf("%s %d", "string", 213);
well the only thing that will work is
python -m pip install pip==
you can and should run it under IDE terminal (mine was pycharm)
I'm extremely late contributing to this, however I was sad to see no one suggested this, if you actually require inline code, this is possible to do. I needed it for some hover buttons, the method is this:
.hover-item {_x000D_
background-color: #FFF;_x000D_
}_x000D_
_x000D_
.hover-item:hover {_x000D_
background-color: inherit;_x000D_
}
_x000D_
<a style="background-color: red;">_x000D_
<div class="hover-item">_x000D_
Content_x000D_
</div>_x000D_
</a
_x000D_
In this case, the inline code: "background-color: red;" is the switch colour on hover, put the colour you need into there and then this solution works. I realise this may not be the perfect solution in terms of compatibility however this works if it is absolutely needed.
If there is no common base-type or interface, then public object GetAnything() {...}
- but it would usually be preferable to have some kind of abstraction such as a common interface. For example if Hello
, Computer
and Radio
all implemented IFoo
, then it could return an IFoo
.
It took me quite a while to figure out, how to not get a false
when using openssl_decrypt()
and get encrypt and decrypt working.
// cryptographic key of a binary string 16 bytes long (because AES-128 has a key size of 16 bytes)
$encryption_key = '58adf8c78efef9570c447295008e2e6e'; // example
$iv = openssl_random_pseudo_bytes(openssl_cipher_iv_length('aes-256-cbc'));
$encrypted = openssl_encrypt($plaintext, 'aes-256-cbc', $encryption_key, OPENSSL_RAW_DATA, $iv);
$encrypted = $encrypted . ':' . base64_encode($iv);
// decrypt to get again $plaintext
$parts = explode(':', $encrypted);
$decrypted = openssl_decrypt($parts[0], 'aes-256-cbc', $encryption_key, OPENSSL_RAW_DATA, base64_decode($parts[1]));
If you want to pass the encrypted string via a URL, you need to urlencode the string:
$encrypted = urlencode($encrypted);
To better understand what is going on, read:
To generate 16 bytes long keys you can use:
$bytes = openssl_random_pseudo_bytes(16);
$hex = bin2hex($bytes);
To see error messages of openssl you can use: echo openssl_error_string();
Hope that helps.
The problem was that I had some other normal error messages in my project, and apparently after I fixed those and when I cleaned and built my project AGAIN, then all .dlls succeeded.
Make sure you don't have any other error messages in your project and if you do, fix those first!
jQuery is just wrapping the standard resize
DOM event, eg.
window.onresize = function(event) {
...
};
jQuery may do some work to ensure that the resize event gets fired consistently in all browsers, but I'm not sure if any of the browsers differ, but I'd encourage you to test in Firefox, Safari, and IE.
This answer is specific to situations where the objects to be passed has nested class structure. With nested class structure, making it Parcelable or Serializeable is a bit tedious. And, the process of serialising an object is not efficient on Android. Consider the example below,
class Myclass {
int a;
class SubClass {
int b;
}
}
With Google's GSON library, you can directly parse an object into a JSON formatted String and convert it back to the object format after usage. For example,
MyClass src = new MyClass();
Gson gS = new Gson();
String target = gS.toJson(src); // Converts the object to a JSON String
Now you can pass this String across activities as a StringExtra with the activity intent.
Intent i = new Intent(FromActivity.this, ToActivity.class);
i.putExtra("MyObjectAsString", target);
Then in the receiving activity, create the original object from the string representation.
String target = getIntent().getStringExtra("MyObjectAsString");
MyClass src = gS.fromJson(target, MyClass.class); // Converts the JSON String to an Object
It keeps the original classes clean and reusable. Above of all, if these class objects are created from the web as JSON objects, then this solution is very efficient and time saving.
UPDATE
While the above explained method works for most situations, for obvious performance reasons, do not rely on Android's bundled-extra system to pass objects around. There are a number of solutions makes this process flexible and efficient, here are a few. Each has its own pros and cons.
Here are various optimisations and applications of proper Python style to make your code a lot neater. I've put in some optional code using the csv
module, which is more desirable than parsing it manually. I've also put in a bit of namedtuple
goodness, but I don't use the attributes that then provides. Names of the parts of the namedtuple are inaccurate, you'll need to correct them.
import csv
from collections import namedtuple
from time import localtime, strftime
# Method one, reading the file into lists manually (less desirable)
with open('grades.dat') as files:
grades = [[e.strip() for e in s.split(',')] for s in files]
# Method two, using csv and namedtuple
StudentRecord = namedtuple('StudentRecord', 'id, lastname, firstname, something, homework1, homework2, homework3, homework4, homework5, homework6, homework7, exam1, exam2, exam3')
grades = map(StudentRecord._make, csv.reader(open('grades.dat')))
# Now you could have student.id, student.lastname, etc.
# Skipping the namedtuple, you could do grades = map(tuple, csv.reader(open('grades.dat')))
request = open('requests.dat', 'w')
cont = 'y'
while cont.lower() == 'y':
answer = raw_input('Please enter the Student I.D. of whom you are looking: ')
for student in grades:
if answer == student[0]:
print '%s, %s %s %s' % (student[1], student[2], student[0], student[3])
time = strftime('%a, %b %d %Y %H:%M:%S', localtime())
print time
print 'Exams - %s, %s, %s' % student[11:14]
print 'Homework - %s, %s, %s, %s, %s, %s, %s' % student[4:11]
total = sum(int(x) for x in student[4:14])
print 'Total points earned - %d' % total
grade = total / 5.5
if grade >= 90:
letter = 'an A'
elif grade >= 80:
letter = 'a B'
elif grade >= 70:
letter = 'a C'
elif grade >= 60:
letter = 'a D'
else:
letter = 'an F'
if letter = 'an A':
print 'Grade: %s, that is equal to %s.' % (grade, letter)
else:
print 'Grade: %.2f, that is equal to %s.' % (grade, letter)
request.write('%s %s, %s %s\n' % (student[0], student[1], student[2], time))
print
cont = raw_input('Would you like to search again? ')
print 'Goodbye.'
You can also apply the default 'text' classes available from bootstrap itself
<h1 class='text-info'>Hey... I'm blue</h1>
No, there is no way to specify defaults. I believer this is done on purpose to enhance readability, at the cost of a little more time (and, hopefully, thought) on the writer's end.
I think the proper approach to having a "default" is to have a new function which supplies that default to the more generic function. Having this, your code becomes clearer on your intent. For example:
func SaySomething(say string) {
// All the complicated bits involved in saying something
}
func SayHello() {
SaySomething("Hello")
}
With very little effort, I made a function that does a common thing and reused the generic function. You can see this in many libraries, fmt.Println
for example just adds a newline to what fmt.Print
would otherwise do. When reading someone's code, however, it is clear what they intend to do by the function they call. With default values, I won't know what is supposed to be happening without also going to the function to reference what the default value actually is.
You only need BOOST_ROOT
, but you're going to want to disable searching the system for your local Boost if you have multiple installations or cross-compiling for iOS or Android. In which case add Boost_NO_SYSTEM_PATHS
is set to false.
set( BOOST_ROOT "" CACHE PATH "Boost library path" )
set( Boost_NO_SYSTEM_PATHS on CACHE BOOL "Do not search system for Boost" )
Normally this is passed on the CMake command-line using the syntax -D<VAR>=value
.
Officially speaking the FindBoost page states these variables should be used to 'hint' the location of Boost.
This module reads hints about search locations from variables:
BOOST_ROOT - Preferred installation prefix
(or BOOSTROOT)
BOOST_INCLUDEDIR - Preferred include directory e.g. <prefix>/include
BOOST_LIBRARYDIR - Preferred library directory e.g. <prefix>/lib
Boost_NO_SYSTEM_PATHS - Set to ON to disable searching in locations not
specified by these hint variables. Default is OFF.
Boost_ADDITIONAL_VERSIONS
- List of Boost versions not known to this module
(Boost install locations may contain the version)
This makes a theoretically correct incantation:
cmake -DBoost_NO_SYSTEM_PATHS=TRUE \
-DBOOST_ROOT=/path/to/boost-dir
include( ExternalProject )
set( boost_URL "http://sourceforge.net/projects/boost/files/boost/1.63.0/boost_1_63_0.tar.bz2" )
set( boost_SHA1 "9f1dd4fa364a3e3156a77dc17aa562ef06404ff6" )
set( boost_INSTALL ${CMAKE_CURRENT_BINARY_DIR}/third_party/boost )
set( boost_INCLUDE_DIR ${boost_INSTALL}/include )
set( boost_LIB_DIR ${boost_INSTALL}/lib )
ExternalProject_Add( boost
PREFIX boost
URL ${boost_URL}
URL_HASH SHA1=${boost_SHA1}
BUILD_IN_SOURCE 1
CONFIGURE_COMMAND
./bootstrap.sh
--with-libraries=filesystem
--with-libraries=system
--with-libraries=date_time
--prefix=<INSTALL_DIR>
BUILD_COMMAND
./b2 install link=static variant=release threading=multi runtime-link=static
INSTALL_COMMAND ""
INSTALL_DIR ${boost_INSTALL} )
set( Boost_LIBRARIES
${boost_LIB_DIR}/libboost_filesystem.a
${boost_LIB_DIR}/libboost_system.a
${boost_LIB_DIR}/libboost_date_time.a )
message( STATUS "Boost static libs: " ${Boost_LIBRARIES} )
Then when you call this script you'll need to include the boost.cmake script (mine is in the a subdirectory), include the headers, indicate the dependency, and link the libraries.
include( boost )
include_directories( ${boost_INCLUDE_DIR} )
add_dependencies( MyProject boost )
target_link_libraries( MyProject
${Boost_LIBRARIES} )
If you have mixed content list. And want to stringify it. Here is one way:
Consider this list:
>>> aa
[None, 10, 'hello']
Convert it to string:
>>> st = ', '.join(map(str, map(lambda x: f'"{x}"' if isinstance(x, str) else x, aa)))
>>> st = '[' + st + ']'
>>> st
'[None, 10, "hello"]'
If required, convert back to list:
>>> ast.literal_eval(st)
[None, 10, 'hello']
My vies is:
Problem: Object belongs to some process(VM) and it's lifetime is the same
Serialisation
- transform object state into stream of bytes(JSON, XML...) for saving, sharing, transforming...
Marshalling
- contains Serialisation + codebase
. Usually it used by Remote procedure call
(RPC) -> Java Remote Method Invocation
(Java RMI) where you are able to invoke a object's method which is hosted on remote Java processes.
codebase
- is a place or URL to class definition
where it can be downloaded by ClassLoader. CLASSPATH
[About] is as a local codebase
JVM -> Class Loader -> load class definition -> class
Very simple diagram for RMI
Serialisation - state
Marshalling - state + class definition
Maybe try this:
<%= link_to "Add to cart",
:controller => "car",
:action => "add_to_cart",
:car => car.attributes %>
But I'd really like to see where the car object is getting setup for this page (i.e., the rest of the view).
Imagine if one went into a store and asked for a device with a power switch. You didn't say whether you wanted a copier, television, vacuum cleaner, desk lamp, waffle maker, or anything. You asked for a device with a power switch. Would you expect the clerk to offer you something that could only be described as "a device with a power switch"?
A typical interface would be analogous to the description "a device with a power switch". Knowing that a piece of equipment is " a device with a power switch" would allow one to do some operations with it (i.e. turn it on and off), and one might plausibly want a list of e.g. "devices with power switches that will need to be turned off at the end of the day", without the devices having to share any characteristic beyond having a power switch, but such situations generally only apply when applying some common operation to devices that were created for some more specific purpose. When creating something from scratch, one would more likely wand a "copier", "television", "vacuum cleaner", or other particular type of device, than some random "device with a power switch".
There are some circumstances where one may want a vaguely-defined object, and really not care about what exactly it is. "Give me your cheapest device that can boil water". It would be nice if one could specify that when someone asks for an arbitrary object with "water boiling" ability, they should be offered an Acme 359 Electric Teakettle, and indeed when using classes it's possible to do that. Note, however, that someone who asks for a "device to boil water" would not be given a "device to boil water", but an "Acme 359 Electric Teakettle".
It is better to use API Key in header, not in URL.
URLs are saved in browser's history if it is tried from browser. It is very rare scenario. But problem comes when the backend server logs all URLs. It might expose the API key.
In two ways, you can use API Key in header
Basic Authorization:
Example from stripe:
curl https://api.stripe.com/v1/charges -u sk_test_BQokikJOvBiI2HlWgH4olfQ2:
curl uses the -u flag to pass basic auth credentials (adding a colon after your API key will prevent it from asking you for a password).
Custom Header
curl -H "X-API-KEY: 6fa741de1bdd1d91830ba" https://api.mydomain.com/v1/users
Status 301 means that the resource (page) is moved permanently to a new location. The client/browser should not attempt to request the original location but use the new location from now on.
Status 302 means that the resource is temporarily located somewhere else, and the client/browser should continue requesting the original url.
Multi-line string literals in vb.net using the XElement class.
Imports System.Xml.Linq
Public Sub Test()
dim sOderBy as string = ""
dim xe as XElement = <SQL>
SELECT * FROM <%= sTableName %>
<ORDER_BY> ORDER BY <%= sOrderBy %></ORDER_BY>
</SQL>
'** conditionally remove a section
if sOrderBy.Length = 0 then xe.<ORDER BY>.Remove
'** convert XElement value to a string
dim sSQL as String = xe.Value
End Sub
<Footer
action={()=>this.setState({showChart: true})}
/>
<footer className="row">
<button type="button" onClick={this.props.action}>Edit</button>
{console.log(this.props)}
</footer>
Try this example to write inline setState, it avoids creating another function.
Similar to some of the other solutions above, I created an elevate
batch file which runs an elevated PowerShell window, bypassing the execution policy to enable running everything from simple commands to batch files to complex PowerShell scripts. I recommend sticking it in your C:\Windows\System32 folder for ease of use.
The original elevate
command executes its task, captures the output, closes the spawned PowerShell window and then returns, writing out the captured output to the original window.
I created two variants, elevatep
and elevatex
, which respectively pause and keep the PowerShell window open for more work.
https://github.com/jt-github/elevate
And in case my link ever dies, here's the code for the original elevate batch file:
@Echo Off
REM Executes a command in an elevated PowerShell window and captures/displays output
REM Note that any file paths must be fully qualified!
REM Example: elevate myAdminCommand -myArg1 -myArg2 someValue
if "%1"=="" (
REM If no command is passed, simply open an elevated PowerShell window.
PowerShell -Command "& {Start-Process PowerShell.exe -Wait -Verb RunAs}"
) ELSE (
REM Copy command+arguments (passed as a parameter) into a ps1 file
REM Start PowerShell with Elevated access (prompting UAC confirmation)
REM and run the ps1 file
REM then close elevated window when finished
REM Output captured results
IF EXIST %temp%\trans.txt del %temp%\trans.txt
Echo %* ^> %temp%\trans.txt *^>^&1 > %temp%\tmp.ps1
Echo $error[0] ^| Add-Content %temp%\trans.txt -Encoding Default >> %temp%\tmp.ps1
PowerShell -Command "& {Start-Process PowerShell.exe -Wait -ArgumentList '-ExecutionPolicy Bypass -File ""%temp%\tmp.ps1""' -Verb RunAs}"
Type %temp%\trans.txt
)
info
is a pointer to a dictionary - you keep adding the same pointer to your list contact
.
Insert info = {}
into the loop and it should solve the problem:
...
content = []
for iframe in soup.find_all('iframe'):
info = {}
info['src'] = iframe.get('src')
info['height'] = iframe.get('height')
info['width'] = iframe.get('width')
...
Unlike C++, Java does not support user defined operator overloading. The overloading is done internally in java.
We can take +
(plus) for example:
int a = 2 + 4;
string = "hello" + "world";
Here, plus adds two integer numbers and concatenates two strings. So we can say that Java supports internal operator overloading but not user defined.
If your branch is behind by master then do:
git checkout master (you are switching your branch to master)
git pull
git checkout yourBranch (switch back to your branch)
git merge master
After merging it, check if there is a conflict or not.
If there is NO CONFLICT then:
git push
If there is a conflict then fix your file(s), then:
git add yourFile(s)
git commit -m 'updating my branch'
git push
var ip = req.connection.remoteAddress;
ip = ip.split(':')[3];
Some commentors already stated that answers to your question will not work for all distributions. Since you did not include CentOS in the question but only in the tags, I'd like to post here the topics one has to understand in order to have a control over his/her proceeding regardless of the distribution:
For your problem, one could start the script on sysinit by adding this line in /etc/inittab and make it respawn in case it terminates:
# start and respawn after termination
ttyS0::respawn:/bin/sh /path/to/my_script.sh
The script has to be made executable in advance of course:
chmod +x /path/to/my_script.sh
Hope this helps
You can use a TextBox
and set multiline
to true
and canEdit
to false
.
This should work:
DataTable dtTable;
MySQLProcessor.DTTable(mysqlCommand, out dtTable);
// On all tables' rows
foreach (DataRow dtRow in dtTable.Rows)
{
// On all tables' columns
foreach(DataColumn dc in dtTable.Columns)
{
var field1 = dtRow[dc].ToString();
}
}
We had an issue relating to duplicated data in our database, with a date field having multiple values where we were meant to have 1. I thought I'd add the way we resolved the issue for reference.
We have a collection called "data" with a numeric "value" field and a date "date" field. We had a process which we thought was idempotent, but ended up adding 2 x values per day on second run:
{ "_id" : "1", "type":"x", "value":1.23, date : ISODate("2013-05-21T08:00:00Z")}
{ "_id" : "2", "type":"x", "value":1.23, date : ISODate("2013-05-21T17:00:00Z")}
We only need 1 of the 2 records, so had to resort the javascript to clean up the db. Our initial approach was going to be to iterate through the results and remove any field with a time of between 6am and 11am (all duplicates were in the morning), but during implementation, made a change. Here's the script used to fix it:
var data = db.data.find({"type" : "x"})
var found = [];
while (data.hasNext()){
var datum = data.next();
var rdate = datum.date;
// instead of the next set of conditions, we could have just used rdate.getHour() and checked if it was in the morning, but this approach was slightly better...
if (typeof found[rdate.getDate()+"-"+rdate.getMonth() + "-" + rdate.getFullYear()] !== "undefined") {
if (datum.value != found[rdate.getDate()+"-"+rdate.getMonth() + "-" + rdate.getFullYear()]) {
print("DISCREPENCY!!!: " + datum._id + " for date " + datum.date);
}
else {
print("Removing " + datum._id);
db.data.remove({ "_id": datum._id});
}
}
else {
found[rdate.getDate()+"-"+rdate.getMonth() + "-" + rdate.getFullYear()] = datum.value;
}
}
and then ran it with mongo thedatabase fixer_script.js
If your iframe is from another domain, (cross domain), the other answers are not going to help you... you will simply need to use this:
var currentUrl = document.referrer;
and - here you've got the main url!
create an empty modal box on the current page and below is the ajax call you can see how to fetch the content in result from another html page.
$.ajax({url: "registration.html", success: function(result){
//alert("success"+result);
$("#contentBody").html(result);
$("#myModal").modal('show');
}});
once the call is done you will get the content of the page by the result to then you can insert the code in you modal's content id using.
You can call controller and get the page content and you can show that in your modal.
below is the example of Bootstrap 3 modal in that we are loading content from registration.html page...
index.html
------------------------------------------------
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css">
<script src="https://ajax.googleapis.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>
<script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js"></script>
<script type="text/javascript">
function loadme(){
//alert("loadig");
$.ajax({url: "registration.html", success: function(result){
//alert("success"+result);
$("#contentBody").html(result);
$("#myModal").modal('show');
}});
}
</script>
</head>
<body>
<!-- Trigger the modal with a button -->
<button type="button" class="btn btn-info btn-lg" onclick="loadme()">Load me</button>
<!-- Modal -->
<div id="myModal" class="modal fade" role="dialog">
<div class="modal-dialog">
<!-- Modal content-->
<div class="modal-content" >
<div class="modal-header">
<button type="button" class="close" data-dismiss="modal">×</button>
<h4 class="modal-title">Modal Header</h4>
</div>
<div class="modal-body" id="contentBody">
</div>
<div class="modal-footer">
<button type="button" class="btn btn-default" data-dismiss="modal">Close</button>
</div>
</div>
</div>
</div>
</body>
</html>
registration.html
--------------------
<!DOCTYPE html>
<html>
<style>
body {font-family: Arial, Helvetica, sans-serif;}
form {
border: 3px solid #f1f1f1;
font-family: Arial;
}
.container {
padding: 20px;
background-color: #f1f1f1;
width: 560px;
}
input[type=text], input[type=submit] {
width: 100%;
padding: 12px;
margin: 8px 0;
display: inline-block;
border: 1px solid #ccc;
box-sizing: border-box;
}
input[type=checkbox] {
margin-top: 16px;
}
input[type=submit] {
background-color: #4CAF50;
color: white;
border: none;
}
input[type=submit]:hover {
opacity: 0.8;
}
</style>
<body>
<h2>CSS Newsletter</h2>
<form action="/action_page.php">
<div class="container">
<h2>Subscribe to our Newsletter</h2>
<p>Lorem ipsum text about why you should subscribe to our newsletter blabla. Lorem ipsum text about why you should subscribe to our newsletter blabla.</p>
</div>
<div class="container" style="background-color:white">
<input type="text" placeholder="Name" name="name" required>
<input type="text" placeholder="Email address" name="mail" required>
<label>
<input type="checkbox" checked="checked" name="subscribe"> Daily Newsletter
</label>
</div>
<div class="container">
<input type="submit" value="Subscribe">
</div>
</form>
</body>
</html>
For a single column:
dtnew <- dt[, Quarter:=as.character(Quarter)]
str(dtnew)
Classes ‘data.table’ and 'data.frame': 10 obs. of 3 variables:
$ ID : Factor w/ 2 levels "A","B": 1 1 1 1 1 2 2 2 2 2
$ Quarter: chr "1" "2" "3" "4" ...
$ value : num -0.838 0.146 -1.059 -1.197 0.282 ...
Using lapply
and as.character
:
dtnew <- dt[, lapply(.SD, as.character), by=ID]
str(dtnew)
Classes ‘data.table’ and 'data.frame': 10 obs. of 3 variables:
$ ID : Factor w/ 2 levels "A","B": 1 1 1 1 1 2 2 2 2 2
$ Quarter: chr "1" "2" "3" "4" ...
$ value : chr "1.487145280568" "-0.827845218358881" "0.028977182770002" "1.35392750102305" ...
Try this one: https://github.com/tantau-horia/jquery-SuperCookie
Quick Usage:
create - create cookie
check - check existance
verify - verify cookie value if JSON
check_index - verify if index exists in JSON
read_values - read cookie value as string
read_JSON - read cookie value as JSON object
read_value - read value of index stored in JSON object
replace_value - replace value from a specified index stored in JSON object
remove_value - remove value and index stored in JSON object
Just use:
$.super_cookie().create("name_of_the_cookie",name_field_1:"value1",name_field_2:"value2"});
$.super_cookie().read_json("name_of_the_cookie");
This worked for me:
; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Default Value: no
catch_workers_output = yes
Edit:
The file to edit is the file that configure your desired pool. By default its: /etc/php-fpm.d/www.conf
I needed including newlines and including the brackets
\[[\s\S]+\]
IF,
Then,
It is highly recommended that you install xampp 1.7.0 . Download Link
Note: This is not a solution to the above problem, but a FIX which would allow you to continue with your development.
This code takes number of row and column from user then takes elements and displays as a matrix.
m = int(input('number of rows, m : '))
n = int(input('number of columns, n : '))
a=[]
for i in range(1,m+1):
b = []
print("{0} Row".format(i))
for j in range(1,n+1):
b.append(int(input("{0} Column: " .format(j))))
a.append(b)
print(a)
Since JPA 2.0 a TypedQuery
can be used:
TypedQuery<SimpleEntity> q =
em.createQuery("select t from SimpleEntity t", SimpleEntity.class);
List<SimpleEntity> listOfSimpleEntities = q.getResultList();
for (SimpleEntity entity : listOfSimpleEntities) {
// do something useful with entity;
}
If you use git LFS, git count-objects does not count your binaries, but only the pointers to them.
If your LFS files are managed by Artifactorys, you should use the REST API:
All right, so i'm a serious cryptkeeper here by dragging up this very old question, but there is a much simpler approach to this, which was touched on by @Baserz above. And that is to use a combination of C# Extension methods and caching (Do NOT use session).
In fact, Microsoft has already provided a number of such extensions in the Microsoft.AspNet.Identity.IdentityExtensions
namespace. For instance, GetUserId()
is an extension method that returns the user Id. There is also GetUserName()
and FindFirstValue()
, which returns claims based on the IPrincipal.
So you need only include the namespace, and then call User.Identity.GetUserName()
to get the users name as configured by ASP.NET Identity.
I'm not certain if this is cached, since the older ASP.NET Identity is not open sourced, and I haven't bothered to reverse engineer it. However, if it's not then you can write your own extension method, that will cache this result for a specific amount of time.
note, you can also do this within Android Studio by clicking the gradle window, and then the 'elephant' button. This will open a new window called "run anything" (can also be found by searching for that name in 'search everywhere') where you can manually type any gradle command you want in. Not "quite" command line, but often provides more of what I need than windows command line.
This allows you to give optional params to gradle tasks, etc.
Im using SOAPpy with Python 2.5.3 in a production setting.
I had to manually edit a couple of files in SOAPpy (something about header code being in the wrong place) but other than that it worked and continues to do so very reliably.
If you are trying to insert the therefore symbol into a WORD DOCUMENT
Hold down the ALT key and type 8756
Hope the answer ur question Regards Al~Hash.
Here is perhaps the simplest explanation of how OAuth2 works for all 4 grant types, i.e., 4 different flows where the app can acquire the access token.
Similarity
All grant type flows have 2 parts:
The 2nd part 'use access token' is the same for all flows
Difference
The 1st part of the flow 'get access token' for each grant type varies.
However, in general the 'get access token' part can be summarized as consisting 5 steps:
Here is a side-by-side diagram comparing how each grant type flow is different based on the 5 steps.
This diagram is from https://blog.oauth.io/introduction-oauth2-flow-diagrams/
Each have different levels of implementation difficulty, security, and uses cases. Depending on your needs and situation, you will have to use one of them. Which to use?
Client Credential: If your app is only serving a single user
Resource Owner Password Crendential: This should be used only as last resort as the user has to hand over his credentials to the app, which means the app can do everything the user can
Authorization Code: The best way to get user authorization
Implicit: If you app is mobile or single-page app
There is more explanation of the choice here: https://blog.oauth.io/choose-oauth2-flow-grant-types-for-app/
In the page load event you set your label
lbl_username.text = "some text";
If you want one with iOS Style, download this framework from Github
iOS Toast Alert View Framework
This examples work on you UIViewController, once you imported the Framework.
Example 1:
//Manual
let tav = ToastAlertView()
tav.message = "Hey!"
tav.image = UIImage(named: "img1")!
tav.show()
//tav.dismiss() to Hide
Example 2:
//Toast Alert View with Time Dissmis Only
self.showToastAlert("5 Seconds",
image: UIImage(named: "img1")!,
hideWithTap: false,
hideWithTime: true,
hideTime: 5.0)
Final:
Try this, its working in FF
body,
input,
select,
button {
font-family: Arial,Helvetica,sans-serif;
font-size: 14px;
}
For Kotlin you can Try this.
var builder = NotificationCompat.Builder(this,CHANNEL_ID)
.setVibrate(longArrayOf(1000, 1000, 1000, 1000, 1000))
.setSound(Settings.System.DEFAULT_NOTIFICATION_URI)
To complement Felix Kling's answer, I was studying a codebase that used to have the following code:
if (is_array($start_vars)) {
foreach ($start_vars as $var) {
session_register($var);
}
} else if (!(empty($start_vars))) {
session_register($start_vars);
}
In order to not use session_register they made the following adjustments:
if (is_array($start_vars)) {
foreach ($start_vars as $var) {
$_SESSION[$var] = $GLOBALS[$var];
}
} else if (!(empty($start_vars))) {
$_SESSION[$start_vars] = $GLOBALS[$start_vars];
}
See this example: https://jsfiddle.net/pqhdce2L/
function b64toBlob(b64Data, contentType, sliceSize) {_x000D_
contentType = contentType || '';_x000D_
sliceSize = sliceSize || 512;_x000D_
_x000D_
var byteCharacters = atob(b64Data);_x000D_
var byteArrays = [];_x000D_
_x000D_
for (var offset = 0; offset < byteCharacters.length; offset += sliceSize) {_x000D_
var slice = byteCharacters.slice(offset, offset + sliceSize);_x000D_
_x000D_
var byteNumbers = new Array(slice.length);_x000D_
for (var i = 0; i < slice.length; i++) {_x000D_
byteNumbers[i] = slice.charCodeAt(i);_x000D_
}_x000D_
_x000D_
var byteArray = new Uint8Array(byteNumbers);_x000D_
_x000D_
byteArrays.push(byteArray);_x000D_
}_x000D_
_x000D_
var blob = new Blob(byteArrays, {type: contentType});_x000D_
return blob;_x000D_
}_x000D_
_x000D_
_x000D_
var contentType = 'image/png';_x000D_
var b64Data = Your Base64 encode;_x000D_
_x000D_
var blob = b64toBlob(b64Data, contentType);_x000D_
var blobUrl = URL.createObjectURL(blob);_x000D_
_x000D_
var img = document.createElement('img');_x000D_
img.src = blobUrl;_x000D_
document.body.appendChild(img);
_x000D_
Swift Version:
NSUserDefaults.standardUserDefaults().setObject(["fr"], forKey: "AppleLanguages")
NSUserDefaults.standardUserDefaults().synchronize()
A less known difference is that in operating systems with optimistic memory allocation, like Linux, the pointer returned by malloc
isn't backed by real memory until the program actually touches it.
calloc
does indeed touch the memory (it writes zeroes on it) and thus you'll be sure the OS is backing the allocation with actual RAM (or swap). This is also why it is slower than malloc (not only does it have to zero it, the OS must also find a suitable memory area by possibly swapping out other processes)
See for instance this SO question for further discussion about the behavior of malloc