This is going to depend on your application but in general the fastest way to transpose a matrix would be to invert your coordinates when you do a look up, then you do not have to actually move any data.

Assuming that c++ code (c++11) is okay as well and the interface is known.

#include <cstdint>
#include <fstream>
#include <streambuf>
#include <regex>

using namespace std;

uint64_t getIFMAC(const string &ifname) {
  ifstream iface("/sys/class/net/" + ifname + "/address");
  string str((istreambuf_iterator<char>(iface)), istreambuf_iterator<char>());
  if (str.length() > 0) {
    string hex = regex_replace(str, std::regex(":"), "");
    return stoull(hex, 0, 16);
  } else {
    return 0;
  }
} 
int main()
{
  string iface = "eth0";
  printf("%s: mac=%016llX\n", iface.c_str(), getIFMAC(iface));
}

@Nat gave a good answer. But since there is no way to shorten a code, why not use contatenate to 'generate' the code you need. It works for me when I'm lazy (at typing the whole code in the cell).

So what we need is just identify the pattern > use excel to built the pattern 'structure' > add " = " and paste it in the intended cell.

For example, you want to achieve (i mean, enter in the cell) :

=IF('testsheet'!$C$1 <= 99,'testsheet'!$A$1,"") &IF('testsheet'!$C$2 <= 99,'testsheet'!$A$2,"") &IF('testsheet'!$C$3 <= 99,'testsheet'!$A$3,"") &IF('testsheet'!$C$4 <= 99,'testsheet'!$A$4,"") &IF('testsheet'!$C$5 <= 99,'testsheet'!$A$5,"") &IF('testsheet'!$C$6 <= 99,'testsheet'!$A$6,"") &IF('testsheet'!$C$7 <= 99,'testsheet'!$A$7,"") &IF('testsheet'!$C$8 <= 99,'testsheet'!$A$8,"") &IF('testsheet'!$C$9 <= 99,'testsheet'!$A$9,"") &IF('testsheet'!$C$10 <= 99,'testsheet'!$A$10,"") &IF('testsheet'!$C$11 <= 99,'testsheet'!$A$11,"") &IF('testsheet'!$C$12 <= 99,'testsheet'!$A$12,"") &IF('testsheet'!$C$13 <= 99,'testsheet'!$A$13,"") &IF('testsheet'!$C$14 <= 99,'testsheet'!$A$14,"") &IF('testsheet'!$C$15 <= 99,'testsheet'!$A$15,"") &IF('testsheet'!$C$16 <= 99,'testsheet'!$A$16,"") &IF('testsheet'!$C$17 <= 99,'testsheet'!$A$17,"") &IF('testsheet'!$C$18 <= 99,'testsheet'!$A$18,"") &IF('testsheet'!$C$19 <= 99,'testsheet'!$A$19,"") &IF('testsheet'!$C$20 <= 99,'testsheet'!$A$20,"") &IF('testsheet'!$C$21 <= 99,'testsheet'!$A$21,"") &IF('testsheet'!$C$22 <= 99,'testsheet'!$A$22,"") &IF('testsheet'!$C$23 <= 99,'testsheet'!$A$23,"") &IF('testsheet'!$C$24 <= 99,'testsheet'!$A$24,"") &IF('testsheet'!$C$25 <= 99,'testsheet'!$A$25,"") &IF('testsheet'!$C$26 <= 99,'testsheet'!$A$26,"") &IF('testsheet'!$C$27 <= 99,'testsheet'!$A$27,"") &IF('testsheet'!$C$28 <= 99,'testsheet'!$A$28,"") &IF('testsheet'!$C$29 <= 99,'testsheet'!$A$29,"") &IF('testsheet'!$C$30 <= 99,'testsheet'!$A$30,"") &IF('testsheet'!$C$31 <= 99,'testsheet'!$A$31,"") &IF('testsheet'!$C$32 <= 99,'testsheet'!$A$32,"") &IF('testsheet'!$C$33 <= 99,'testsheet'!$A$33,"") &IF('testsheet'!$C$34 <= 99,'testsheet'!$A$34,"") &IF('testsheet'!$C$35 <= 99,'testsheet'!$A$35,"") &IF('testsheet'!$C$36 <= 99,'testsheet'!$A$36,"") &IF('testsheet'!$C$37 <= 99,'testsheet'!$A$37,"") &IF('testsheet'!$C$38 <= 99,'testsheet'!$A$38,"") &IF('testsheet'!$C$39 <= 99,'testsheet'!$A$39,"") &IF('testsheet'!$C$40 <= 99,'testsheet'!$A$40,"") 

I didn't type it, I just use "&" symbol to combine arranged cell in excel (another file, not the file we are working on).

Notice that :

part1 > IF('testsheet'!$C$

part2 > 1 to 40

part3 > <= 99,'testsheet'!$A$

part4 > 1 to 40

part5 > ,"") &

• Enter part1 to A1, part3 to C1, part to E1.
• Enter " = A1 " in A2, " = C1 " in C2, " = E1 " in E2.
• Enter " = B1+1 " in B2, " = D1+1 " in D2.
• Enter " =A2&B2&C2&D2&E2 " in G2
• Enter " =I1&G2 " in I2

Now select A2:I2 , and drag it down. Notice that the number did the increament per row added, and the generated text is combined, cell by cell and line by line.

• Copy I41 content,
• paste it somewhere, add " = " in front, remove the extra & and the back.

Result = code as you intended.

I've use excel/OpenOfficeCalc to help me generate code for my projects. Works for me, hope it helps for others. (:

None of the previous solutions actually used multiple cores on my GNU/Linux server (where I don't have administrator rights). They just ran on a single core.

I used the lower level os.fork interface to spawn multiple processes. This is the code that worked for me:

from os import fork

values = ['different', 'values', 'for', 'threads']

for i in range(len(values)):
    p = fork()
    if p == 0:
        my_function(values[i])
        break

To count unique values in column, say hID of dataframe df, use:

len(df.hID.unique())

I had the same problem as you a while back. I can't remember the details but the following code got things working for me. This code is used within a Spring Webflow flow, hence the RequestContext and ExternalContext classes. But the part that is most relevant to you is the doAutoLogin method.

public String registerUser(UserRegistrationFormBean userRegistrationFormBean,
                           RequestContext requestContext,
                           ExternalContext externalContext) {

    try {
        Locale userLocale = requestContext.getExternalContext().getLocale();
        this.userService.createNewUser(userRegistrationFormBean, userLocale, Constants.SYSTEM_USER_ID);
        String emailAddress = userRegistrationFormBean.getChooseEmailAddressFormBean().getEmailAddress();
        String password = userRegistrationFormBean.getChoosePasswordFormBean().getPassword();
        doAutoLogin(emailAddress, password, (HttpServletRequest) externalContext.getNativeRequest());
        return "success";

    } catch (EmailAddressNotUniqueException e) {
        MessageResolver messageResolvable 
                = new MessageBuilder().error()
                                      .source(UserRegistrationFormBean.PROPERTYNAME_EMAIL_ADDRESS)
                                      .code("userRegistration.emailAddress.not.unique")
                                      .build();
        requestContext.getMessageContext().addMessage(messageResolvable);
        return "error";
    }

}


private void doAutoLogin(String username, String password, HttpServletRequest request) {

    try {
        // Must be called from request filtered by Spring Security, otherwise SecurityContextHolder is not updated
        UsernamePasswordAuthenticationToken token = new UsernamePasswordAuthenticationToken(username, password);
        token.setDetails(new WebAuthenticationDetails(request));
        Authentication authentication = this.authenticationProvider.authenticate(token);
        logger.debug("Logging in with [{}]", authentication.getPrincipal());
        SecurityContextHolder.getContext().setAuthentication(authentication);
    } catch (Exception e) {
        SecurityContextHolder.getContext().setAuthentication(null);
        logger.error("Failure in autoLogin", e);
    }

}

your question doesn't sound as if you even tried it yourself, so i shouldn't even think of answering, but: if a hidden div can't be printed with that one line:

$('SelectorToPrint').printElement();

simply change it to:

$('SelectorToPrint').show().printElement();

which should make it work in all cases.

for the rest, there's no solution. the plugin will open the print-dialog for you where the user has to choose his printer. you simply can't find out if a printer is attached with javascript (and you (almost) can't print without print-dialog - if you're thinking about that).

NOTE:

The $.browser object has been removed in version 1.9.x of jQuery making this library unsupported.

See http://mikehadlow.blogspot.com/2012/07/tracing-systemnet-to-debug-http-clients.html

To configure a System.Net listener to output to both the console and a log file, add the following to your assembly configuration file:

<system.diagnostics>
  <trace autoflush="true" />
  <sources>
    <source name="System.Net">
      <listeners>
        <add name="MyTraceFile"/>
        <add name="MyConsole"/>
      </listeners>
    </source>
  </sources>
  <sharedListeners>
    <add
      name="MyTraceFile"
      type="System.Diagnostics.TextWriterTraceListener"
      initializeData="System.Net.trace.log" />
    <add name="MyConsole" type="System.Diagnostics.ConsoleTraceListener" />
  </sharedListeners>
  <switches>
    <add name="System.Net" value="Verbose" />
  </switches>
</system.diagnostics>

The problem is that your anonymous object property data-icon has an invalid name. C# properties cannot have dashes in their names. There are two ways you can get around that:

Use an underscore instead of dash (MVC will automatically replace the underscore with a dash in the emitted HTML):

@Html.ActionLink("Edit", "edit", "markets",
      new { id = 1 },
      new {@class="ui-btn-right", data_icon="gear"})

Use the overload that takes in a dictionary:

@Html.ActionLink("Edit", "edit", "markets",
      new { id = 1 },
      new Dictionary<string, object> { { "class", "ui-btn-right" }, { "data-icon", "gear" } });

The jQueryUI provides a extension to animate function that allows you to animate css class.

edit: Example here

There are also methods to add/remove/toggle class which you might also be interested in.

The sad state of "record separators" or "line terminators" is a legacy of the dark ages of computing.

Now, we take it for granted that anything we want to represent is in some way structured data and conforms to various abstractions that define lines, files, protocols, messages, markup, whatever.

But once upon a time this wasn't exactly true. Applications built-in control characters and device-specific processing. The brain-dead systems that required both CR and LF simply had no abstraction for record separators or line terminators. The CR was necessary in order to get the teletype or video display to return to column one and the LF (today, NL, same code) was necessary to get it to advance to the next line. I guess the idea of doing something other than dumping the raw data to the device was too complex.

Unix and Mac actually specified an abstraction for the line end, imagine that. Sadly, they specified different ones. (Unix, ahem, came first.) And naturally, they used a control code that was already "close" to S.O.P.

Since almost all of our operating software today is a descendent of Unix, Mac, or MS operating SW, we are stuck with the line ending confusion.

You are correct that a stack is 'just' a data structure. Here, however, it refers to a hardware implemented stack used for a special purpose --"The Stack".

Many people have commented about hardware implemented stack versus the (software)stack data structure. I would like to add that there are three major stack structure types -

1. A call stack -- Which is the one you are asking about! It stores function parameters and return address etc. Do read Chapter 4 ( All about 4th page i.e. page 53)functions in that book. There is a good explanation.
2. A generic stack Which you might use in your program to do something special...
3. A generic hardware stack
   I am not sure about this, but I remember reading somewhere that there is a general purpose hardware implemented stack available in some architectures. If anyone knows whether this is correct, please do comment.

The first thing to know is the architecture you are programming for, which the book explains (I just looked it up --link). To really understand things, I suggest that you learn about the memory, addressing, registers and architecture of x86 (I assume thats what you are learning --from the book).

I'm currently using the CuTest unit test framework:

http://cutest.sourceforge.net/

It's ideal for embedded systems as it's very lightweight and simple. I had no problems getting it to work on the target platform as well as on the desktop. In addition to writing the unit tests, all that's required is:

• a header file included wherever you're calling the CuTest routines
• a single additional 'C' file to be compiled/linked into the image
• some simple code added to to main to set up and call the unit tests - I just have this in a special main() function that gets compiled if UNITTEST is defined during the build.

The system needs to support a heap and some stdio functionality (which not all embedded systems have). But the code is simple enough that you could probably work in alternatives to those requirements if your platform doesn't have them.

With some judicious use of extern "C"{} blocks it also supports testing C++ just fine.

From MSDN

// Create a request using a URL that can receive a post. 
WebRequest request = WebRequest.Create ("http://contoso.com/PostAccepter.aspx ");
// Set the Method property of the request to POST.
request.Method = "POST";
// Create POST data and convert it to a byte array.
string postData = "This is a test that posts this string to a Web server.";
byte[] byteArray = Encoding.UTF8.GetBytes (postData);
// Set the ContentType property of the WebRequest.
request.ContentType = "application/x-www-form-urlencoded";
// Set the ContentLength property of the WebRequest.
request.ContentLength = byteArray.Length;
// Get the request stream.
Stream dataStream = request.GetRequestStream ();
// Write the data to the request stream.
dataStream.Write (byteArray, 0, byteArray.Length);
// Close the Stream object.
dataStream.Close ();
// Get the response.
WebResponse response = request.GetResponse ();
// Display the status.
Console.WriteLine (((HttpWebResponse)response).StatusDescription);
// Get the stream containing content returned by the server.
dataStream = response.GetResponseStream ();
// Open the stream using a StreamReader for easy access.
StreamReader reader = new StreamReader (dataStream);
// Read the content.
string responseFromServer = reader.ReadToEnd ();
// Display the content.
Console.WriteLine (responseFromServer);
// Clean up the streams.
reader.Close ();
dataStream.Close ();
response.Close ();

Take into account that the information must be sent in the format key1=value1&key2=value2

I was looking for a listing of macOS but found nothing, maybe this helps someone.

Output on macOS Catalina (10.15.7) using net5.0

# SpecialFolders (Only with value)
SpecialFolder.ApplicationData: /Users/$USER/.config
SpecialFolder.CommonApplicationData: /usr/share
SpecialFolder.Desktop: /Users/$USER/Desktop
SpecialFolder.DesktopDirectory: /Users/$USER/Desktop
SpecialFolder.Favorites: /Users/$USER/Library/Favorites
SpecialFolder.Fonts: /Users/$USER/Library/Fonts
SpecialFolder.InternetCache: /Users/$USER/Library/Caches
SpecialFolder.LocalApplicationData: /Users/$USER/.local/share
SpecialFolder.MyDocuments: /Users/$USER
SpecialFolder.MyMusic: /Users/$USER/Music
SpecialFolder.MyPictures: /Users/$USER/Pictures
SpecialFolder.ProgramFiles: /Applications
SpecialFolder.System: /System
SpecialFolder.UserProfile: /Users/$USER

# SpecialFolders (All)
SpecialFolder.AdminTools: 
SpecialFolder.ApplicationData: /Users/$USER/.config
SpecialFolder.CDBurning: 
SpecialFolder.CommonAdminTools: 
SpecialFolder.CommonApplicationData: /usr/share
SpecialFolder.CommonDesktopDirectory: 
SpecialFolder.CommonDocuments: 
SpecialFolder.CommonMusic: 
SpecialFolder.CommonOemLinks: 
SpecialFolder.CommonPictures: 
SpecialFolder.CommonProgramFiles: 
SpecialFolder.CommonProgramFilesX86: 
SpecialFolder.CommonPrograms: 
SpecialFolder.CommonStartMenu: 
SpecialFolder.CommonStartup: 
SpecialFolder.CommonTemplates: 
SpecialFolder.CommonVideos: 
SpecialFolder.Cookies: 
SpecialFolder.Desktop: /Users/$USER/Desktop
SpecialFolder.DesktopDirectory: /Users/$USER/Desktop
SpecialFolder.Favorites: /Users/$USER/Library/Favorites
SpecialFolder.Fonts: /Users/$USER/Library/Fonts
SpecialFolder.History: 
SpecialFolder.InternetCache: /Users/$USER/Library/Caches
SpecialFolder.LocalApplicationData: /Users/$USER/.local/share
SpecialFolder.LocalizedResources: 
SpecialFolder.MyComputer: 
SpecialFolder.MyDocuments: /Users/$USER
SpecialFolder.MyMusic: /Users/$USER/Music
SpecialFolder.MyPictures: /Users/$USER/Pictures
SpecialFolder.MyVideos: 
SpecialFolder.NetworkShortcuts: 
SpecialFolder.PrinterShortcuts: 
SpecialFolder.ProgramFiles: /Applications
SpecialFolder.ProgramFilesX86: 
SpecialFolder.Programs: 
SpecialFolder.Recent: 
SpecialFolder.Resources: 
SpecialFolder.SendTo: 
SpecialFolder.StartMenu: 
SpecialFolder.Startup: 
SpecialFolder.System: /System
SpecialFolder.SystemX86: 
SpecialFolder.Templates: 
SpecialFolder.UserProfile: /Users/$USER
SpecialFolder.Windows: 

I have replaced my username with $USER.

Code Snippet from pogosama.

foreach(Environment.SpecialFolder f in Enum.GetValues(typeof(Environment.SpecialFolder)))
{
    string commonAppData = Environment.GetFolderPath(f);
    Console.WriteLine("{0}: {1}", f, commonAppData);
}
Console.ReadLine();

You get an apparently random set because ROWNUM is applied before the ORDER BY. So your query takes the first ten rows and sorts them.0 To select the top ten salaries you should use an analytic function in a subquery, then filter that:

 select * from 
     (select empno,
             ename,
             sal,
             row_number() over(order by sal desc nulls last) rnm
    from emp) 
 where rnm<=10

A very simple function that also solves your problem

from random import randint

data = []

def unique_rand(inicial, limit, total):

        data = []

        i = 0

        while i < total:
            number = randint(inicial, limit)
            if number not in data:
                data.append(number)
                i += 1

        return data


data = unique_rand(1, 60, 6)

print(data)


"""

prints something like 

[34, 45, 2, 36, 25, 32]

"""

 static void Main()
     {
             for (int i=0; i<GetNames().Length; i++)
               {
                    Console.WriteLine (GetNames()[i]);
                }
     }

  static string[] GetNames()
   {
         string[] ret = {"Answer", "by", "Anonymous", "Pakistani"};
         return ret;
   }

TLDR;

$ docker run --rm -iv${PWD}:/host-volume my-image sh -s <<EOF
chown $(id -u):$(id -g) my-artifact.tar.xz
cp -a my-artifact.tar.xz /host-volume
EOF

Description

docker run with a host volume, chown the artifact, cp the artifact to the host volume:

$ docker build -t my-image - <<EOF
> FROM busybox
> WORKDIR /workdir
> RUN touch foo.txt bar.txt qux.txt
> EOF
Sending build context to Docker daemon  2.048kB
Step 1/3 : FROM busybox
 ---> 00f017a8c2a6
Step 2/3 : WORKDIR /workdir
 ---> Using cache
 ---> 36151d97f2c9
Step 3/3 : RUN touch foo.txt bar.txt qux.txt
 ---> Running in a657ed4f5cab
 ---> 4dd197569e44
Removing intermediate container a657ed4f5cab
Successfully built 4dd197569e44

$ docker run --rm -iv${PWD}:/host-volume my-image sh -s <<EOF
chown -v $(id -u):$(id -g) *.txt
cp -va *.txt /host-volume
EOF
changed ownership of '/host-volume/bar.txt' to 10335:11111
changed ownership of '/host-volume/qux.txt' to 10335:11111
changed ownership of '/host-volume/foo.txt' to 10335:11111
'bar.txt' -> '/host-volume/bar.txt'
'foo.txt' -> '/host-volume/foo.txt'
'qux.txt' -> '/host-volume/qux.txt'

$ ls -n
total 0
-rw-r--r-- 1 10335 11111 0 May  7 18:22 bar.txt
-rw-r--r-- 1 10335 11111 0 May  7 18:22 foo.txt
-rw-r--r-- 1 10335 11111 0 May  7 18:22 qux.txt

This trick works because the chown invocation within the heredoc the takes $(id -u):$(id -g) values from outside the running container; i.e., the docker host.

The benefits are:

• you don't have to docker container run --name or docker container create --name before
• you don't have to docker container rm after

The exact way to check is:

//takes care of boolen, undefined and empty

isNaN(x) || typeof(x) ==='boolean' || typeof(x) !=='undefined' || x!=='' ? 'is really a nan' : 'is a number'

try this:

ren "File 1-1" "File 1 - %date:/=-% %time::=-%"

'a' in x

and a quick search reveals some nice information about it: http://docs.python.org/3/tutorial/datastructures.html#dictionaries

HTML5 download attribute

Just to allow user to download the image or other file you may use the HTML5 download attribute.

Static file download

<a href="/images/image-name.jpg" download>
<!-- OR -->
<a href="/images/image-name.jpg" download="new-image-name.jpg"> 

Dynamic file download

In cases requesting image dynamically it is possible to emulate such download.

If your image is already loaded and you have the base64 source then:

function saveBase64AsFile(base64, fileName) {
    var link = document.createElement("a");

    document.body.appendChild(link); // for Firefox

    link.setAttribute("href", base64);
    link.setAttribute("download", fileName);
    link.click();
}

Otherwise if image file is downloaded as Blob you can use FileReader to convert it to Base64:

function saveBlobAsFile(blob, fileName) {
    var reader = new FileReader();

    reader.onloadend = function () {    
        var base64 = reader.result ;
        var link = document.createElement("a");

        document.body.appendChild(link); // for Firefox

        link.setAttribute("href", base64);
        link.setAttribute("download", fileName);
        link.click();
    };

    reader.readAsDataURL(blob);
}

Firefox

The anchor tag you are creating also needs to be added to the DOM in Firefox, in order to be recognized for click events (Link).

IE is not supported: Caniuse link

You can run 20 processes and use the command:

wait

Your script will wait and continue when all your background jobs are finished.

one-liner bash script to help facility Chris's answer above, as I had painted myself in a corner as well using Vundle updates to my .vim scripts. DEST is the path to the directory containing your submodules. Do this after doing git rm -r $DEST

DEST='path'; for file in `ls ${DEST}`; do git submodule add `grep url ${DEST}/${file}/.git/config|awk -F= '{print $2}'` ${DEST}/${file}; done

cheers

This question is an old one, but it shows up at the top of Google when searching for how to run a single test. I don't know if it's a recent addition, but to run a single test out of a spec you can do the following:

rspec path/to/spec:<line number>

where -line number- is a line number that contains part of your test. For example, if you had a spec like:

1: 
2: it "should be awesome" do
3:   foo = 3
4:   foo.should eq(3)
5: end
6:

Let's say it's saved in spec/models/foo_spec.rb. Then you would run:

rspec spec/models/foo_spec.rb:2

and it would just run that one spec. In fact, that number could be anything from 2 to 5.

Hope this helps!

If by "restart", you mean to start a new 4 second interval at this moment, then you must stop and restart the timer.

function myFn() {console.log('idle');}

var myTimer = setInterval(myFn, 4000);

// Then, later at some future time, 
// to restart a new 4 second interval starting at this exact moment in time
clearInterval(myTimer);
myTimer = setInterval(myFn, 4000);

You could also use a little timer object that offers a reset feature:

function Timer(fn, t) {
    var timerObj = setInterval(fn, t);

    this.stop = function() {
        if (timerObj) {
            clearInterval(timerObj);
            timerObj = null;
        }
        return this;
    }

    // start timer using current settings (if it's not already running)
    this.start = function() {
        if (!timerObj) {
            this.stop();
            timerObj = setInterval(fn, t);
        }
        return this;
    }

    // start with new or original interval, stop current interval
    this.reset = function(newT = t) {
        t = newT;
        return this.stop().start();
    }
}

Usage:

var timer = new Timer(function() {
    // your function here
}, 5000);


// switch interval to 10 seconds
timer.reset(10000);

// stop the timer
timer.stop();

// start the timer
timer.start();

Working demo: https://jsfiddle.net/jfriend00/t17vz506/

Sending raw POST requests can be sometimes more convenient. Below you can see post.js original example from PhantomJS

// Example using HTTP POST operation

var page = require('webpage').create(),
    server = 'http://posttestserver.com/post.php?dump',
    data = 'universe=expanding&answer=42';

page.open(server, 'post', data, function (status) {
    if (status !== 'success') {
        console.log('Unable to post!');
    } else {
        console.log(page.content);
    }
    phantom.exit();
});

document.getElementsByName("name") will get several elements called by same name . document.getElementsByName("name")[Number] will get one of them. document.getElementsByName("name")[Number].value will get the value of paticular element.

The key of this question is this:
The name of elements is not unique, it is usually used for several input elements in the form.
On the other hand, the id of the element is unique, which is the only definition for a particular element in a html file.

To elaborate on https://stackoverflow.com/a/59311063/1328979, here is a fully documented, annotated and tested Python 3 implementation for the general case.

from __future__ import annotations  # To allow "MinHeap.push -> MinHeap:"
from typing import Generic, List, Optional, TypeVar
from heapq import heapify, heappop, heappush, heapreplace


T = TypeVar('T')


class MinHeap(Generic[T]):
    '''
    MinHeap provides a nicer API around heapq's functionality.
    As it is a minimum heap, the first element of the heap is always the
    smallest.
    >>> h = MinHeap([3, 1, 4, 2])
    >>> h[0]
    1
    >>> h.peek()
    1
    >>> h.push(5)  # N.B.: the array isn't always fully sorted.
    [1, 2, 4, 3, 5]
    >>> h.pop()
    1
    >>> h.pop()
    2
    >>> h.pop()
    3
    >>> h.push(3).push(2)
    [2, 3, 4, 5]
    >>> h.replace(1)
    2
    >>> h
    [1, 3, 4, 5]
    '''
    def __init__(self, array: Optional[List[T]] = None):
        if array is None:
            array = []
        heapify(array)
        self.h = array
    def push(self, x: T) -> MinHeap:
        heappush(self.h, x)
        return self  # To allow chaining operations.
    def peek(self) -> T:
        return self.h[0]
    def pop(self) -> T:
        return heappop(self.h)
    def replace(self, x: T) -> T:
        return heapreplace(self.h, x)
    def __getitem__(self, i) -> T:
        return self.h[i]
    def __len__(self) -> int:
        return len(self.h)
    def __str__(self) -> str:
        return str(self.h)
    def __repr__(self) -> str:
        return str(self.h)


class Reverse(Generic[T]):
    '''
    Wrap around the provided object, reversing the comparison operators.
    >>> 1 < 2
    True
    >>> Reverse(1) < Reverse(2)
    False
    >>> Reverse(2) < Reverse(1)
    True
    >>> Reverse(1) <= Reverse(2)
    False
    >>> Reverse(2) <= Reverse(1)
    True
    >>> Reverse(2) <= Reverse(2)
    True
    >>> Reverse(1) == Reverse(1)
    True
    >>> Reverse(2) > Reverse(1)
    False
    >>> Reverse(1) > Reverse(2)
    True
    >>> Reverse(2) >= Reverse(1)
    False
    >>> Reverse(1) >= Reverse(2)
    True
    >>> Reverse(1)
    1
    '''
    def __init__(self, x: T) -> None:
        self.x = x
    def __lt__(self, other: Reverse) -> bool:
        return other.x.__lt__(self.x)
    def __le__(self, other: Reverse) -> bool:
        return other.x.__le__(self.x)
    def __eq__(self, other) -> bool:
        return self.x == other.x
    def __ne__(self, other: Reverse) -> bool:
        return other.x.__ne__(self.x)
    def __ge__(self, other: Reverse) -> bool:
        return other.x.__ge__(self.x)
    def __gt__(self, other: Reverse) -> bool:
        return other.x.__gt__(self.x)
    def __str__(self):
        return str(self.x)
    def __repr__(self):
        return str(self.x)


class MaxHeap(MinHeap):
    '''
    MaxHeap provides an implement of a maximum-heap, as heapq does not provide
    it. As it is a maximum heap, the first element of the heap is always the
    largest. It achieves this by wrapping around elements with Reverse,
    which reverses the comparison operations used by heapq.
    >>> h = MaxHeap([3, 1, 4, 2])
    >>> h[0]
    4
    >>> h.peek()
    4
    >>> h.push(5)  # N.B.: the array isn't always fully sorted.
    [5, 4, 3, 1, 2]
    >>> h.pop()
    5
    >>> h.pop()
    4
    >>> h.pop()
    3
    >>> h.pop()
    2
    >>> h.push(3).push(2).push(4)
    [4, 3, 2, 1]
    >>> h.replace(1)
    4
    >>> h
    [3, 1, 2, 1]
    '''
    def __init__(self, array: Optional[List[T]] = None):
        if array is not None:
            array = [Reverse(x) for x in array]  # Wrap with Reverse.
        super().__init__(array)
    def push(self, x: T) -> MaxHeap:
        super().push(Reverse(x))
        return self
    def peek(self) -> T:
        return super().peek().x
    def pop(self) -> T:
        return super().pop().x
    def replace(self, x: T) -> T:
        return super().replace(Reverse(x)).x


if __name__ == '__main__':
    import doctest
    doctest.testmod()

https://gist.github.com/marccarre/577a55850998da02af3d4b7b98152cf4

you can follow BaseAdapter and create your custome Xml file and bind it with you BaseAdpter and populate it with Listview see here need to change xml file as Require.

I feel like all of these answers are slightly incomplete, so here's the proper way to add a viewController's view as a subview of another viewController's view:

    [self addChildViewController:viewControllerToAdd];
    [self.view addSubview:viewControllerToAdd.view];
    [viewControllerToAdd didMoveToParentViewController:self];

If you'd like, you can copy this into your code as a snippet. SO doesn't seem to understand code replacement formatting, but they will show up clean in Xcode:

    [self addChildViewController:<#viewControllerToAdd#>];
    [self.view addSubview:<#viewControllerToAdd#>.view];
    [<#viewControllerToAdd#> didMoveToParentViewController:self];

willMove is called automatically w/ addChild. Thanks @iOSSergey

When your custom container calls the addChildViewController: method, it automatically calls the willMoveToParentViewController: method of the view controller to be added as a child before adding it.

public ActionResult SomeAction(string start, string end)

The framework will map the query string parameters to the method parameters.

I use this function:

/**
 * @param $url
 * @param array $options
 * @return string
 * @throws Exception
 */
function checkURL($url, array $options = array()) {
    if (empty($url)) {
        throw new Exception('URL is empty');
    }

    // list of HTTP status codes
    $httpStatusCodes = array(
        100 => 'Continue',
        101 => 'Switching Protocols',
        102 => 'Processing',
        200 => 'OK',
        201 => 'Created',
        202 => 'Accepted',
        203 => 'Non-Authoritative Information',
        204 => 'No Content',
        205 => 'Reset Content',
        206 => 'Partial Content',
        207 => 'Multi-Status',
        208 => 'Already Reported',
        226 => 'IM Used',
        300 => 'Multiple Choices',
        301 => 'Moved Permanently',
        302 => 'Found',
        303 => 'See Other',
        304 => 'Not Modified',
        305 => 'Use Proxy',
        306 => 'Switch Proxy',
        307 => 'Temporary Redirect',
        308 => 'Permanent Redirect',
        400 => 'Bad Request',
        401 => 'Unauthorized',
        402 => 'Payment Required',
        403 => 'Forbidden',
        404 => 'Not Found',
        405 => 'Method Not Allowed',
        406 => 'Not Acceptable',
        407 => 'Proxy Authentication Required',
        408 => 'Request Timeout',
        409 => 'Conflict',
        410 => 'Gone',
        411 => 'Length Required',
        412 => 'Precondition Failed',
        413 => 'Payload Too Large',
        414 => 'Request-URI Too Long',
        415 => 'Unsupported Media Type',
        416 => 'Requested Range Not Satisfiable',
        417 => 'Expectation Failed',
        418 => 'I\'m a teapot',
        422 => 'Unprocessable Entity',
        423 => 'Locked',
        424 => 'Failed Dependency',
        425 => 'Unordered Collection',
        426 => 'Upgrade Required',
        428 => 'Precondition Required',
        429 => 'Too Many Requests',
        431 => 'Request Header Fields Too Large',
        449 => 'Retry With',
        450 => 'Blocked by Windows Parental Controls',
        500 => 'Internal Server Error',
        501 => 'Not Implemented',
        502 => 'Bad Gateway',
        503 => 'Service Unavailable',
        504 => 'Gateway Timeout',
        505 => 'HTTP Version Not Supported',
        506 => 'Variant Also Negotiates',
        507 => 'Insufficient Storage',
        508 => 'Loop Detected',
        509 => 'Bandwidth Limit Exceeded',
        510 => 'Not Extended',
        511 => 'Network Authentication Required',
        599 => 'Network Connect Timeout Error'
    );

    $ch = curl_init($url);
    curl_setopt($ch, CURLOPT_NOBODY, true);
    curl_setopt($ch, CURLOPT_FOLLOWLOCATION, true);

    if (isset($options['timeout'])) {
        $timeout = (int) $options['timeout'];
        curl_setopt($ch, CURLOPT_TIMEOUT, $timeout);
    }

    curl_exec($ch);
    $returnedStatusCode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
    curl_close($ch);

    if (array_key_exists($returnedStatusCode, $httpStatusCodes)) {
        return "URL: '{$url}' - Error code: {$returnedStatusCode} - Definition: {$httpStatusCodes[$returnedStatusCode]}";
    } else {
        return "'{$url}' does not exist";
    }
}

If you just want a count of the distinct pairs.

The simplest way to do that is as follows SELECT COUNT(DISTINCT a,b) FROM pairs

The previous solutions would list all the pairs and then you'd have to do a second query to count them.

If none of these work, try getBaseContext(), instead of context or this.

Conversion Operators (also known as User Defined Conversions)

In C++ you can create conversion operators, operators that allow the compiler to convert between your types and other defined types. There are two types of conversion operators, implicit and explicit ones.

Implicit Conversion Operators (C++98/C++03 and C++11)

An implicit conversion operator allows the compiler to implicitly convert (like the conversion between int and long) the value of a user-defined type to some other type.

The following is a simple class with an implicit conversion operator:

class my_string {
public:
  operator const char*() const {return data_;} // This is the conversion operator
private:
  const char* data_;
};

Implicit conversion operators, like one-argument constructors, are user-defined conversions. Compilers will grant one user-defined conversion when trying to match a call to an overloaded function.

void f(const char*);

my_string str;
f(str); // same as f( str.operator const char*() )

At first this seems very helpful, but the problem with this is that the implicit conversion even kicks in when it isn’t expected to. In the following code, void f(const char*) will be called because my_string() is not an lvalue, so the first does not match:

void f(my_string&);
void f(const char*);

f(my_string());

Beginners easily get this wrong and even experienced C++ programmers are sometimes surprised because the compiler picks an overload they didn’t suspect. These problems can be mitigated by explicit conversion operators.

Explicit Conversion Operators (C++11)

Unlike implicit conversion operators, explicit conversion operators will never kick in when you don't expect them to. The following is a simple class with an explicit conversion operator:

class my_string {
public:
  explicit operator const char*() const {return data_;}
private:
  const char* data_;
};

Notice the explicit. Now when you try to execute the unexpected code from the implicit conversion operators, you get a compiler error:

prog.cpp: In function ‘int main()’:
prog.cpp:15:18: error: no matching function for call to ‘f(my_string)’
prog.cpp:15:18: note: candidates are:
prog.cpp:11:10: note: void f(my_string&)
prog.cpp:11:10: note:   no known conversion for argument 1 from ‘my_string’ to ‘my_string&’
prog.cpp:12:10: note: void f(const char*)
prog.cpp:12:10: note:   no known conversion for argument 1 from ‘my_string’ to ‘const char*’

To invoke the explicit cast operator, you have to use static_cast, a C-style cast, or a constructor style cast ( i.e. T(value) ).

However, there is one exception to this: The compiler is allowed to implicitly convert to bool. In addition, the compiler is not allowed to do another implicit conversion after it converts to bool (a compiler is allowed to do 2 implicit conversions at a time, but only 1 user-defined conversion at max).

Because the compiler will not cast "past" bool, explicit conversion operators now remove the need for the Safe Bool idiom. For example, smart pointers before C++11 used the Safe Bool idiom to prevent conversions to integral types. In C++11, the smart pointers use an explicit operator instead because the compiler is not allowed to implicitly convert to an integral type after it explicitly converted a type to bool.

Continue to Overloading new and delete.

Any of the following will work:

print 'Hello\nWorld'

print 'Hello'
print 'World'

Additionally, if you want to print a blank line (not make a new line), print or print() will work.

You can use the css property white-space and set it to pre-wrap to the enclosing div element.

div {
     white-space: pre-wrap;
}

I think your problem is that the match method is returning an array. The 0th item in the array is the original string, the 1st thru nth items correspond to the 1st through nth matched parenthesised items. Your "alert()" call is showing the entire array.

This is how I do it.

try:
    do_something()
except:
    # How can I log my exception here, complete with its traceback?
    import traceback
    traceback.format_exc() # this will print a complete trace to stout.

<button> is newer than <input type="submit">, is more semantic, easy to stylize and support HTML inside of it.

If you use ASP.NET and IISExpress go to "C:\Users\\Documents\IISExpress\config\applicationhost.config", search for your Project and look if you have a faulty virtualDirectory entry.

A control that is missing from the original set of WPF controls, but much used, is the NumericUpDown control. It is a neat way to get users to select a number from a fixed range, in a small area. A slider could be used, but for compact forms with little horizontal real-estate, the NumericUpDown is essential.

Solution A (via WindowsFormsHost)

You can use the Windows Forms NumericUpDown control in WPF by hosting it in a WindowsFormsHost. Pay attention that you have to include a reference to System.Windows.Forms.dll assembly.

<Window x:Class="WpfApplication61.MainWindow"
        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
        xmlns:wf="clr-namespace:System.Windows.Forms;assembly=System.Windows.Forms" 
        Title="MainWindow" Height="350" Width="525">
    <StackPanel>    
        <WindowsFormsHost>
            <wf:NumericUpDown/>
        </WindowsFormsHost>
...

Solution B (custom)

There are several commercial and codeplex versions around, but both involve installing 3rd party dlls and overheads to your project. Far simpler to build your own, and a aimple way to do that is with the ScrollBar.

A vertical ScrollBar with no Thumb (just the repeater buttons) is in fact just what we want. It inherits rom RangeBase, so it has all the properties we need, like Min, Max, and SmallChange (set to 1, to restrict it to Integer values)

So we change the ScrollBar ControlTemplate. First we remove the Thumb and Horizontal trigger actions. Then we group the remains into a grid and add a TextBlock for the number:

<Grid Margin="2">
    <Grid.ColumnDefinitions>
        <ColumnDefinition/>
        <ColumnDefinition />
    </Grid.ColumnDefinitions>
    <TextBlock VerticalAlignment="Center" FontSize="20" MinWidth="25" Text="{Binding Value, RelativeSource={RelativeSource TemplatedParent}}"/>
    <Grid Grid.Column="1" x:Name="GridRoot" Width="{DynamicResource {x:Static SystemParameters.VerticalScrollBarWidthKey}}" Background="{TemplateBinding Background}">
        <Grid.RowDefinitions>
            <RowDefinition MaxHeight="18"/>
            <RowDefinition Height="0.00001*"/>
            <RowDefinition MaxHeight="18"/>
        </Grid.RowDefinitions>
        <RepeatButton x:Name="DecreaseRepeat" Command="ScrollBar.LineDownCommand" Focusable="False">
            <Grid>
                <Path x:Name="DecreaseArrow" Stroke="{TemplateBinding Foreground}" StrokeThickness="1" Data="M 0 4 L 8 4 L 4 0 Z"/>
            </Grid>
        </RepeatButton>
        <RepeatButton Grid.Row="2" x:Name="IncreaseRepeat" Command="ScrollBar.LineUpCommand" Focusable="False">
            <Grid>
                <Path x:Name="IncreaseArrow" Stroke="{TemplateBinding Foreground}" StrokeThickness="1" Data="M 0 0 L 4 4 L 8 0 Z"/>
            </Grid>
        </RepeatButton>
    </Grid>
</Grid>

Sources:

• Is there a numericUpDown component in wpf?
• WPF NumericUpDown from retemplating a ScrollBar

I have other worked solution here,

1. Quit Xcode
2. Open Xcode and clean project
3. Build Pods project first
4. Build Project

$(document).ready(function() {
  $('#div_one').bind('click', function() {
    $('#div_two').addClass('large');
  });
});

If I understood your question.

Or you can modify css directly:

var $speech = $('div.speech');
var currentSize = $speech.css('fontSize');
$speech.css('fontSize', '10px');

Just found this extension to do it - simple and effective.

I did what BalusC said but it was not enough for me, I had to clean the Tomcat workdirectory : ( Click right on right on Tomcat in the Servers Tab -> Clean Tomcat Work Directory )

I got same problem, I tried all above, noting solved my problem. Luckely, I solved the problem this way:

echo $SHELL

Output

/bin/zsh
OR 
/bin/bash

If it showing "bash" in output. You have to add env properties in .bashrc file (.bash_profile i did not tried, you can try) or else
It is showing 'zsh' in output. You have to add env properties in .zshrc file, if not exist already you create one no issue.

As i have came here looking for an Android-Java-Answer i am going to do a short summary:

1. Use java.net.Authenticator as shown by James van Huis
2. Use Apache Commons HTTP Client, as in this Answer
3. Use basic java.net.URLConnection and set the Authentication-Header manually like shown here

If you want to use java.net.URLConnection with Basic Authentication in Android try this code:

URL url = new URL("http://www.mywebsite.com/resource");
URLConnection urlConnection = url.openConnection();
String header = "Basic " + new String(android.util.Base64.encode("user:pass".getBytes(), android.util.Base64.NO_WRAP));
urlConnection.addRequestProperty("Authorization", header);
// go on setting more request headers, reading the response, etc

First of all, wave bye-bye to those quotes:

background-image: url(nickcage.jpg); // No quotes around the file name

Next, if your html, css and image are all in the same directory then removing the quotes should fix it. If, however, your css or image are in subdirectories of where your html lives, you'll want to make sure you correctly path to the image:

background-image: url(../images/nickcage.jpg); // css and image live in subdorectories

background-image: url(images/nickcage.jpg); // css lives with html but images is a subdirectory

Hope it helps.

Code for set background color, for SolidColor:

button.Background = new SolidColorBrush(Color.FromArgb(Avalue, rValue, gValue, bValue));

if you read a bit further - "Of course, on the backend, there are threads and processes for DB access and process execution. However, these are not explicitly exposed to your code, so you can’t worry about them other than by knowing that I/O interactions e.g. with the database, or with other processes will be asynchronous from the perspective of each request since the results from those threads are returned via the event loop to your code."

about - "everything runs in parallel except your code" - your code is executed synchronously, whenever you invoke an asynchronous operation such as waiting for IO, the event loop handles everything and invokes the callback. it just not something you have to think about.

in your example: there are two requests A (comes first) and B. you execute request A, your code continue to run synchronously and execute request B. the event loop handles request A, when it finishes it invokes the callback of request A with the result, same goes to request B.

You can use the excellent jquery-Json plugin:

http://code.google.com/p/jquery-json/

Makes it easy to convert to and from Json objects.

How about comparing the original value of the field and the changed value of the field and deducting the difference as the pasted value? This catches the pasted text correctly even if there is existing text in the field.

http://jsfiddle.net/6b7sK/

function text_diff(first, second) {
    var start = 0;
    while (start < first.length && first[start] == second[start]) {
        ++start;
    }
    var end = 0;
    while (first.length - end > start && first[first.length - end - 1] == second[second.length - end - 1]) {
        ++end;
    }
    end = second.length - end;
    return second.substr(start, end - start);
}
$('textarea').bind('paste', function () {
    var self = $(this);
    var orig = self.val();
    setTimeout(function () {
        var pasted = text_diff(orig, $(self).val());
        console.log(pasted);
    });
});

By default there is no password is set for root user in XAMPP.

You can set password for root user of MySQL.

Navigate to

localhost:80/security/index.php

and set password for root user.

Note:Please change the port number in above url if your Apache in on different port.

Open XAMPP control panel Click "Shell" button

Command prompt window will open now in that window type

mysql -u root -p;

It will ask for password type the password which you have set for root user.

There you go ur logged in as root user :D Now do what u want to do :P

For mobiles, it’s better to use it

canvas.width = document.documentElement.clientWidth;
canvas.height = document.documentElement.clientHeight;

because it will display incorrectly after changing the orientation.The “viewport” will be increased when changing the orientation to portrait.See full example

Partly, because Go doesn't have generics (so you would need one set-type for every type, or fall back on reflection, which is rather inefficient).

Partly, because if all you need is "add/remove individual elements to a set" and "relatively space-efficient", you can get a fair bit of that simply by using a map[yourtype]bool (and set the value to true for any element in the set) or, for more space efficiency, you can use an empty struct as the value and use _, present = the_setoid[key] to check for presence.

serialize all the form-elements within a div.

You could do that by targeting the div #target-div-id inside your form using :

$('#target-div-id').find('select, textarea, input').serialize();

For website developers, another option you have is to follow a working Facebook Graph API tutorial such as this one.

But if you need a quick solution where you can customize and embed a Facebook page feed instantly, you should use website plugins such as this one.

Here's a step by step guide:

1. Get a Free Key or Paid Key.
2. Go to this login page and use the key to login.
3. Once logged in, click “+ Create Custom Feed” button.
4. On the pop up, name your custom Facebook page feed.
5. On the drop-down, select “Facebook Page Feed On Your Website” option.
6. Enter your Facebook Page ID.
7. Click the “Proceed” button. This will show you the customization options.
8. Click the “ Embed On Website” button located on the upper-right corner of the screen.
9. On the pop up, copy the embed code by clicking the “Copy Code” button.
10. Paste the embed code on your website.

Visit the tutorial link to see a live demo there as well.

The second question is actually easier to answer. Look at the stringWithContentsOfURL:encoding:error: method of NSString - it lets you pass in a URL as an instance of NSURL (which can easily be instantiated from NSString) and returns a string with the complete contents of the page at that URL. For example:

NSString *googleString = @"http://www.google.com";
NSURL *googleURL = [NSURL URLWithString:googleString];
NSError *error;
NSString *googlePage = [NSString stringWithContentsOfURL:googleURL 
                                                encoding:NSASCIIStringEncoding
                                                   error:&error];

After running this code, googlePage will contain the HTML for www.google.com, and error will contain any errors encountered in the fetch. (You should check the contents of error after the fetch.)

Going the other way (from a UIWebView) is a bit trickier, but is basically the same concept. You'll have to pull the request from the view, then do the fetch as before:

NSURL *requestURL = [[yourWebView request] URL];
NSError *error;
NSString *page = [NSString stringWithContentsOfURL:requestURL 
                                          encoding:NSASCIIStringEncoding
                                             error:&error];

EDIT: Both these methods take a performance hit, however, since they do the request twice. You can get around this by grabbing the content from a currently-loaded UIWebView using its stringByEvaluatingJavascriptFromString: method, as such:

NSString *html = [yourWebView stringByEvaluatingJavaScriptFromString: 
                                         @"document.body.innerHTML"];

This will grab the current HTML contents of the view using the Document Object Model, parse the JavaScript, then give it to you as an NSString* of HTML.

Another way is to do your request programmatically first, then load the UIWebView from what you requested. Let's say you take the second example above, where you have NSString *page as the result of a call to stringWithContentsOfURL:encoding:error:. You can then push that string into the web view using loadHTMLString:baseURL:, assuming you also held on to the NSURL you requested:

[yourWebView loadHTMLString:page baseURL:requestURL];

I'm not sure, however, if this will run JavaScript found in the page you load (the method name, loadHTMLString, is somewhat ambiguous, and the docs don't say much about it).

For more info:

• UIWebView class reference
• NSString class reference
• NSURL class reference

Microsoft Visio is probably the best I've came across, although as far as I know it won't automatically generate based on your relationships.

EDIT: try this in Visio, could give you what you need http://office.microsoft.com/en-us/visio-help/reverse-engineering-an-existing-database-HA001182257.aspx

I implemented this in the following way after receiving a NullPointerException from the accepted answer.

In my FXML:

<Button onMouseClicked="#onMouseClickedCancelBtn" text="Cancel">

In my Controller class:

@FXML public void onMouseClickedCancelBtn(InputEvent e) {
    final Node source = (Node) e.getSource();
    final Stage stage = (Stage) source.getScene().getWindow();
    stage.close();
}

As Ryan says, the tsc compiler has a switch --declaration which generates a .d.ts file from a .ts file. Also note that (barring bugs) TypeScript is supposed to be able to compile Javascript, so you can pass existing javascript code to the tsc compiler.

The normalize function from the BBMisc package was the right tool for me since it can deal with NA values.

Here is how to use it:

Given the following dataset,

    ASR_API     <- c("CV",  "F",    "IER",  "LS-c", "LS-o")
    Human       <- c(NA,    5.8,    12.7,   NA, NA)
    Google      <- c(23.2,  24.2,   16.6,   12.1,   28.8)
    GoogleCloud <- c(23.3,  26.3,   18.3,   12.3,   27.3)
    IBM     <- c(21.8,  47.6,   24.0,   9.8,    25.3)
    Microsoft   <- c(29.1,  28.1,   23.1,   18.8,   35.9)
    Speechmatics    <- c(19.1,  38.4,   21.4,   7.3,    19.4)
    Wit_ai      <- c(35.6,  54.2,   37.4,   19.2,   41.7)
    dt     <- data.table(ASR_API,Human, Google, GoogleCloud, IBM, Microsoft, Speechmatics, Wit_ai)
> dt
   ASR_API Human Google GoogleCloud  IBM Microsoft Speechmatics Wit_ai
1:      CV    NA   23.2        23.3 21.8      29.1         19.1   35.6
2:       F   5.8   24.2        26.3 47.6      28.1         38.4   54.2
3:     IER  12.7   16.6        18.3 24.0      23.1         21.4   37.4
4:    LS-c    NA   12.1        12.3  9.8      18.8          7.3   19.2
5:    LS-o    NA   28.8        27.3 25.3      35.9         19.4   41.7

normalized values can be obtained like this:

> dtn <- normalize(dt, method = "standardize", range = c(0, 1), margin = 1L, on.constant = "quiet")
> dtn
   ASR_API      Human     Google GoogleCloud         IBM  Microsoft Speechmatics      Wit_ai
1:      CV         NA  0.3361245   0.2893457 -0.28468670  0.3247336  -0.18127203 -0.16032655
2:       F -0.7071068  0.4875320   0.7715885  1.59862532  0.1700986   1.55068347  1.31594762
3:     IER  0.7071068 -0.6631646  -0.5143923 -0.12409420 -0.6030768   0.02512682 -0.01746131
4:    LS-c         NA -1.3444981  -1.4788780 -1.16064578 -1.2680075  -1.24018782 -1.46198764
5:    LS-o         NA  1.1840062   0.9323361 -0.02919864  1.3762521  -0.15435044  0.32382788

where hand calculated method just ignores colmuns containing NAs:

> dt %>% mutate(normalizedHuman = (Human - mean(Human))/sd(Human)) %>% 
+ mutate(normalizedGoogle = (Google - mean(Google))/sd(Google)) %>% 
+ mutate(normalizedGoogleCloud = (GoogleCloud - mean(GoogleCloud))/sd(GoogleCloud)) %>% 
+ mutate(normalizedIBM = (IBM - mean(IBM))/sd(IBM)) %>% 
+ mutate(normalizedMicrosoft = (Microsoft - mean(Microsoft))/sd(Microsoft)) %>% 
+ mutate(normalizedSpeechmatics = (Speechmatics - mean(Speechmatics))/sd(Speechmatics)) %>% 
+ mutate(normalizedWit_ai = (Wit_ai - mean(Wit_ai))/sd(Wit_ai))
  ASR_API Human Google GoogleCloud  IBM Microsoft Speechmatics Wit_ai normalizedHuman normalizedGoogle
1      CV    NA   23.2        23.3 21.8      29.1         19.1   35.6              NA        0.3361245
2       F   5.8   24.2        26.3 47.6      28.1         38.4   54.2              NA        0.4875320
3     IER  12.7   16.6        18.3 24.0      23.1         21.4   37.4              NA       -0.6631646
4    LS-c    NA   12.1        12.3  9.8      18.8          7.3   19.2              NA       -1.3444981
5    LS-o    NA   28.8        27.3 25.3      35.9         19.4   41.7              NA        1.1840062
  normalizedGoogleCloud normalizedIBM normalizedMicrosoft normalizedSpeechmatics normalizedWit_ai
1             0.2893457   -0.28468670           0.3247336            -0.18127203      -0.16032655
2             0.7715885    1.59862532           0.1700986             1.55068347       1.31594762
3            -0.5143923   -0.12409420          -0.6030768             0.02512682      -0.01746131
4            -1.4788780   -1.16064578          -1.2680075            -1.24018782      -1.46198764
5             0.9323361   -0.02919864           1.3762521            -0.15435044       0.32382788

(normalizedHuman is made a list of NAs ...)

regarding the selection of specific columns for calculation, a generic method can be employed like this one:

data_vars <- df_full %>% dplyr::select(-ASR_API,-otherVarNotToBeUsed)
meta_vars <- df_full %>% dplyr::select(ASR_API,otherVarNotToBeUsed)
data_varsn <- normalize(data_vars, method = "standardize", range = c(0, 1), margin = 1L, on.constant = "quiet")
dtn <- cbind(meta_vars,data_varsn)

I have researched this a little and from what I have found you have four options:

Version 1: Parent div with display as table-cell

If you do not mind using the display:table-cell on your parent div, you can use of the following options:

.area{
    height: 100px;
    width: 100px;
    background: red;
    margin:10px;
    text-align: center;
    display:table-cell;
    vertical-align:middle;
}?

Live DEMO

Version 2: Parent div with display block and content display table-cell

.area{
    height: 100px;
    width: 100px;
    background: red;
    margin:10px;
    text-align: center;
    display:block;
}

.content {
    height: 100px;
    width: 100px;
    display:table-cell;
    vertical-align:middle;    
}?

Live DEMO

Version 3: Parent div floating and content div as display table-cell

.area{
    background: red;
    margin:10px;
    text-align: center;
    display:block;
    float: left;
}

.content {
    display:table-cell;
    vertical-align:middle;
    height: 100px;
    width: 100px;
}?

Live DEMO

Version 4: Parent div position relative with content position absolute

The only problem that I have had with this version is that it seems you will have to create the css for every specific implementation. The reason for this is the content div needs to have the set height that your text will fill and the margin-top will be figured off of that. This issue can be seen in the demo. You can get it to work for every scenario manually by changing the height % of your content div and multiplying it by -.5 to get your margin-top value.

.area{
    position:relative; 
    display:block;
    height:100px;
    width:100px;
    border:1px solid black;
    background:red;
    margin:10px;
}

.content { 
    position:absolute;
    top:50%; 
    height:50%; 
    width:100px;
    margin-top:-25%;
    text-align:center;
}?

Live DEMO

This only hovers the navbar when you are not on a mobile device, because I find that hovering the navigation does not work well on mobile divices:

    $( document ).ready(function() {

    $( 'ul.nav li.dropdown' ).hover(function() {
        // you could also use this condition: $( window ).width() >= 768
        if ($('.navbar-toggle').css('display') === 'none' 
            && false === ('ontouchstart' in document)) {

            $( '.dropdown-toggle', this ).trigger( 'click' );
        }
    }, function() {
        if ($('.navbar-toggle').css('display') === 'none'
            && false === ('ontouchstart' in document)) {

            $( '.dropdown-toggle', this ).trigger( 'click' );
        }
    });

});

my telepathic abilities are not particularly great, but here is what I think you want:

def merge(list_of_strings, indices):
    list_of_strings[indices[0]] = ''.join(list_of_strings[i] for i in indices)
    list_of_strings = [s for i, s in enumerate(list_of_strings) if i not in indices[1:]]
    return list_of_strings

I should note, since it might be not obvious, that it's not the same as what is proposed in other answers.

With your own Code and a Slight Change withou jQuery,

function testingAPI(){ 
    var key = "8a1c6a354c884c658ff29a8636fd7c18"; 
    var url = "https://api.fantasydata.net/nfl/v2/JSON/PlayerSeasonStats/2015";
    console.log(httpGet(url,key)); 
}


function httpGet(url,key){
    var xmlHttp = new XMLHttpRequest();
    xmlHttp.open( "GET", url, false );
    xmlHttp.setRequestHeader("Ocp-Apim-Subscription-Key",key);
    xmlHttp.send(null);
    return xmlHttp.responseText;
}

Thank You

if (!"success".equals(statusCheck))

This issue has been fixed in the regular release of MVC4. Now you can do:

public string GetFindBooks(string author="", string title="", string isbn="", string  somethingelse="", DateTime? date= null) 
{
    // ...
}

and everything will work out of the box.

Dir function loses focus easily when I handle and process files from other folders.

I've gotten better results with the component FileSystemObject.

Full example is given here:

http://www.xl-central.com/list-files-fso.html

Don't forget to set a reference in the Visual Basic Editor to Microsoft Scripting Runtime (by using Tools > References)

Give it a try!

The below piece of code is working for me in the Oreo, you can try this. hope it will work for you

private void sendNotification(Context ctx, String title, int notificationNumber, String message, String subtext, Intent intent) {
try {

            PendingIntent pendingIntent = PendingIntent.getActivity(ctx, notificationNumber, intent,
                    PendingIntent.FLAG_UPDATE_CURRENT);
            Uri url = null;           
            NotificationCompat.Builder notificationBuilder = null;
            try {
                if (Build.VERSION.SDK_INT >= 26) {

                    try{
                        NotificationManager notificationManager = (NotificationManager)getApplicationContext().getSystemService(Context.NOTIFICATION_SERVICE);
                        notificationManager.deleteNotificationChannel(CHANNEL_ID_1);
                        notificationManager.deleteNotificationChannel(CHANNEL_ID_2);

                        if(!intent.getStringExtra("type").equalsIgnoreCase(""+TYPE_REQUEST)){
                            NotificationChannel breaking = new NotificationChannel(CHANNEL_ID_1, CHANNEL_ID_1_NAME, NotificationManager.IMPORTANCE_HIGH);
                            breaking.setShowBadge(false);
                            breaking.enableLights(true);
                            breaking.enableVibration(true);
                            breaking.setLightColor(Color.WHITE);
                            breaking.setVibrationPattern(new long[]{100, 200, 100, 200, 100, 200, 100});
                            breaking.setSound(url,new AudioAttributes.Builder().build());

                            notificationBuilder = new NotificationCompat.Builder(this,CHANNEL_ID_1)
                                    .setSmallIcon(R.mipmap.ic_launcher);
                            notificationManager.createNotificationChannel(breaking);

                        }else{

                            NotificationChannel politics = new NotificationChannel(CHANNEL_ID_2,CHANNEL_ID_2_NAME, NotificationManager.IMPORTANCE_DEFAULT);
                            politics.setShowBadge(false);
                            politics.enableLights(true);
                            politics.enableVibration(true);
                            politics.setLightColor(Color.BLUE);
                            politics.setVibrationPattern(new long[]{100, 200, 100, 200, 100});
                            politics.setSound(url,new AudioAttributes.Builder().build());

                            notificationBuilder = new NotificationCompat.Builder(this,CHANNEL_ID_2)
                                    .setSmallIcon(R.mipmap.ic_launcher);
                            notificationManager.createNotificationChannel(politics);
                        }
                    }catch (Exception e){
                        e.printStackTrace();
                    }

                } else {
                    notificationBuilder = new NotificationCompat.Builder(ctx)
                            .setSmallIcon(R.mipmap.ic_launcher);
                }
            } catch (Exception e) {
                e.printStackTrace();
            }

            if (notificationBuilder == null) {
                notificationBuilder = new NotificationCompat.Builder(ctx)
                        .setSmallIcon(R.mipmap.ic_launcher);
            }


            notificationBuilder.setContentTitle(title);          
            notificationBuilder.setSubText(subtext);
            notificationBuilder.setAutoCancel(true);

            notificationBuilder.setContentIntent(pendingIntent);
            notificationBuilder.setNumber(notificationNumber);
            NotificationManager notificationManager =
                    (NotificationManager) ctx.getSystemService(Context.NOTIFICATION_SERVICE);

            notificationManager.notify(notificationNumber, notificationBuilder.build());

        } catch (Exception e) {
            e.printStackTrace();
        }

    }

here is a code with confirm exit:

@Override
    public void onBackPressed()
    {
        if(webView.canGoBack()){
            webView.goBack();
        }else{
            new AlertDialog.Builder(this)
            .setIcon(android.R.drawable.ic_dialog_alert)
            .setTitle("Exit!")
            .setMessage("Are you sure you want to close?")
            .setPositiveButton("Yes", new DialogInterface.OnClickListener()
            {
                @Override
                public void onClick(DialogInterface dialog, int which) {
                    finish();    
                }

            })
            .setNegativeButton("No", null)
            .show();    
        }   
    }

This code handled every input for me in the whole site. It checks for the ENTER KEY inside an INPUT field and doesn't stop on TEXTAREA or other places.

$(document).on("keydown", "input", function(e){
 if(e.which == 13){
  event.preventDefault();
  return false;
 }
});

There is also a project on Github that aims to be a more direct port of the jQuery.extend():

https://github.com/dreamerslab/node.extend

An example, modified from the jQuery docs:

var extend = require('node.extend');

var object1 = {
    apple: 0,
    banana: {
        weight: 52,
        price: 100
    },
    cherry: 97
};

var object2 = {
    banana: {
        price: 200
    },
    durian: 100
};

var merged = extend(object1, object2);

Also making aware of interactions between clock() and usleep(). usleep() suspends the program, and clock() only measures the time the program is running.

If might be better off to use gettimeofday() as mentioned here

You can use regex “\\s”

Example program to count number of spaces (Java 9 and above)

import java.util.regex.Matcher;
import java.util.regex.Pattern;

public class Main {
  public static void main(String[] args) {

    Pattern pattern = Pattern.compile("\\s", Pattern.CASE_INSENSITIVE);        
    Matcher matcher = pattern.matcher("stackoverflow is a good place to get all my answers");        

    long matchCount = matcher.results().count();   
 
    if(matchCount > 0) 
      System.out.println("Match found " + matchCount + " times.");           
    else 
      System.out.println("Match not found");        
  }
}

For Java 8 and below you can use matcher.find() in a while loop and increment the count. For example,

int count = 0;
while (matcher.find()) {
  count ++;
}

Add which colors you want to colors and then set colorByPoint to true.

colors: [
'#4572A7', 
'#AA4643', 
'#89A54E', 
'#80699B', 
'#3D96AE', 
'#DB843D', 
'#92A8CD', 
'#A47D7C', 
'#B5CA92'
],

plotOptions: {
    column: {
        colorByPoint: true
    }
}

demo

Reference:

• http://api.highcharts.com/highstock#colors
• http://api.highcharts.com/highcharts#plotOptions.column.colorByPoint

base64.b16encode and base64.b16decode convert bytes to and from hex and work across all Python versions. The codecs approach also works, but is less straightforward in Python 3.

This works:

async function IsLoggedIn(): Promise<boolean> {
  try {
    await new Promise((resolve, reject) =>
      app.auth().onAuthStateChanged(
        user => {
          if (user) {
            // User is signed in.
            resolve(user)
          } else {
            // No user is signed in.
            reject('no user logged in')
          }
        },
        // Prevent console error
        error => reject(error)
      )
    )
    return true
  } catch (error) {
    return false
  }
}

You can use base_path() to get the base of your application - and then just add your public folder to that:

$path = base_path().'/public';
return File::put($path , $data)

Note: Be very careful about allowing people to upload files into your root of public_html. If they upload their own index.php file, they will take over your site.

Inserting Space in emailId field after every 8 characters

public string BreakEmailId(string emailId) {
    string returnVal = string.Empty;
    if (emailId.Length > 8) {           
        for (int i = 0; i < emailId.Length; i += 8) {
            returnVal += emailId.Substring(i, 8) + " ";
        }
    }

    return returnVal;
}

I made this simple function to achieve this:

void clearscreen() { 
    for(int i=0; i<10; i++) {
        Serial.println("\n\n\n\n\n\n\n\n\n\n\n\n\n\n");
    }
}

It works well for me in the default terminal

 private static final String FILE_HEADER ="meter_Number,latestDate";
    private static final String COMMA_DELIMITER = ",";
    private static final String NEW_LINE_SEPARATOR = "\n";
    static SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MM-dd HH:m m:ss");

    private void writeToCsv(Map<String, Date> meterMap) {
        try {
            Iterator<Map.Entry<String, Date>> iter = meterMap.entrySet().iterator();
            FileWriter fw = new FileWriter("smaple.csv");
            fw.append(FILE_HEADER.toString());
            fw.append(NEW_LINE_SEPARATOR);
            while (iter.hasNext()) {
                Map.Entry<String, Date> entry = iter.next();
                try {
                    fw.append(entry.getKey());
                    fw.append(COMMA_DELIMITER);
                    fw.append(formatter.format(entry.getValue()));
                    fw.append(NEW_LINE_SEPARATOR);
                } catch (Exception e) {
                    e.printStackTrace();
                } finally {
                    iter.remove();
                }
            }
        } catch (Exception e) {
            e.printStackTrace();
        }
    }

A simple solution is to put in your .vimrc these lines:

nmap <C-UP> :m-2<CR>  
nmap <C-DOWN> :m+1<CR>

In a sense you're right, although anything lower than 2^8 characters will still register as a byte of data.

If you account for the base character that leaves anything with a VARCHAR < 255 as consuming the same amount of space.

255 is a good baseline definition unless you particularly wish to curtail excessive input.

There are a couple ways you can deal with this. First, and perhaps best, is to rework your equation so that it is not so long; it is likely unreadable if it is that long.

If it must be so, check out the AMS Short Math Guide for some ways to handle it. (on the second page)

Personally, I'd use an align environment, so that the breaking and alignment can be precisely controlled. e.g.

\begin{align*}
   x&+y+\dots+\dots+x_100000000\\
   &+x_100000001+\dots+\dots
\end{align*}

which would line up the first plus signs of each line... but obviously, you can set the alignments wherever you like.

This may be resolved by fixing .idea/modules.xml
Check for https://stackoverflow.com/a/61343944/11910757

If you want to set environment variables permanently in Git-Bash, you have two options:

1. Set a regular Windows environment variable. Git-bash gets all existing Windows environment variables at startupp.

2. Set up env variables in .bash_profile file.

.bash_profile is by default located in a user home folder, like C:\users\userName\git-home\.bash_profile. You can change the path to the bash home folder by setting HOME Windows environment variable.

.bash_profile file uses the regular Bash syntax and commands

# Export a variable in .bash_profile
export DIR=c:\dir
# Nix path style works too
export DIR=/c/dir

# And don't forget to add quotes if a variable contains whitespaces
export ANOTHER_DIR="c:\some dir"

Read more information about Bash configurations files.

For Windows, I did recently this:

// +build windows

package main

import (
    "syscall"
    "unsafe"
)

var (
    modrpcrt4 = syscall.NewLazyDLL("rpcrt4.dll")
    procUuidCreate = modrpcrt4.NewProc("UuidCreate")
)

const (
    RPC_S_OK = 0
)

func NewUuid() ([]byte, error) {
    var uuid [16]byte
    rc, _, e := syscall.Syscall(procUuidCreate.Addr(), 1,
             uintptr(unsafe.Pointer(&uuid[0])), 0, 0)
    if int(rc) != RPC_S_OK {
        if e != 0 {
            return nil, error(e)
        } else {
            return nil, syscall.EINVAL
        }
    }
    return uuid[:], nil
}

I was getting a lot of empty text nodes with the accepted filter function. If you're only interested in selecting text nodes that contain non-whitespace, try adding a nodeValue conditional to your filter function, like a simple $.trim(this.nodevalue) !== '':

$('element')
    .contents()
    .filter(function(){
        return this.nodeType === 3 && $.trim(this.nodeValue) !== '';
    });

http://jsfiddle.net/ptp6m97v/

Or to avoid strange situations where the content looks like whitespace, but is not (e.g. the soft hyphen ­ character, newlines \n, tabs, etc.), you can try using a Regular Expression. For example, \S will match any non-whitespace characters:

$('element')
        .contents()
        .filter(function(){
            return this.nodeType === 3 && /\S/.test(this.nodeValue);
        });

You can use substr

for example:

new Date().getFullYear().toString().substr(-2)

To overcome the space in 'switch ()', you can use code :

Blade::extend(function($value, $compiler){
    $value = preg_replace('/(\s*)@switch[ ]*\((.*)\)(?=\s)/', '$1<?php switch($2):', $value);
    $value = preg_replace('/(\s*)@endswitch(?=\s)/', '$1endswitch; ?>', $value);
    $value = preg_replace('/(\s*)@case[ ]*\((.*)\)(?=\s)/', '$1case $2: ?>', $value);
    $value = preg_replace('/(?<=\s)@default(?=\s)/', 'default: ?>', $value);
    $value = preg_replace('/(?<=\s)@breakswitch(?=\s)/', '<?php break;', $value);
    return $value;
  });

You can do as

 body{
        background:url('equote.png'),url('equote.png');
        background-size:400px 100px,50px 50px;
    }

Based on this discussion, I built this config.json that works perfectly:

{
  "development": {
    "username": "root",
    "password": null,
    "logging" : false,
    "database": "posts_db_dev",
    "host": "127.0.0.1",
    "dialect": "mysql",
    "operatorsAliases": false 
  }
}

No need for Gson or JSON parsing libraries. Just using new JSONObject(Map<String, JSONObject>).toString(), e.g:

/**
 * convert target map to JSON string
 *
 * @param map the target map
 * @return JSON string of the map
 */
@NonNull public String toJson(@NonNull Map<String, Target> map) {
    final Map<String, JSONObject> flatMap = new HashMap<>();
    for (String key : map.keySet()) {
        try {
            flatMap.put(key, toJsonObject(map.get(key)));
        } catch (JSONException e) {
            e.printStackTrace();
        }
    }
    try {
        // 2 indentSpaces for pretty printing
        return new JSONObject(flatMap).toString(2);
    } catch (JSONException e) {
        e.printStackTrace();
        return "{}";
    }
}

However, one approach to dividing the dataset into train, test, cv with 0.6, 0.2, 0.2 would be to use the train_test_split method twice.

from sklearn.model_selection import train_test_split

x, x_test, y, y_test = train_test_split(xtrain,labels,test_size=0.2,train_size=0.8)
x_train, x_cv, y_train, y_cv = train_test_split(x,y,test_size = 0.25,train_size =0.75)

The cleanest way is to start from a stream of indices:

String[] names = {"Sam", "Pamela", "Dave", "Pascal", "Erik"};
IntStream.range(0, names.length)
         .filter(i -> names[i].length() <= i)
         .mapToObj(i -> names[i])
         .collect(Collectors.toList());

The resulting list contains "Erik" only.

One alternative which looks more familiar when you are used to for loops would be to maintain an ad hoc counter using a mutable object, for example an AtomicInteger:

String[] names = {"Sam", "Pamela", "Dave", "Pascal", "Erik"};
AtomicInteger index = new AtomicInteger();
List<String> list = Arrays.stream(names)
                          .filter(n -> n.length() <= index.incrementAndGet())
                          .collect(Collectors.toList());

Note that using the latter method on a parallel stream could break as the items would not necesarily be processed "in order".

Just Add these 2 permissions

<uses-permission android:name="android.permission.INTERNET" />
<uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" />

in your app's AndroidManifest.xml

    <?xml version="1.0" encoding="utf-8"?>
    <manifest xmlns:android="http://schemas.android.com/apk/res/android"
        package="com.example.android.networkusage"
        ...>
    
    
        <uses-permission android:name="android.permission.INTERNET" />
        <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" />
    
        <application 
            ...>
            ...
        </application>
    </manifest>

Happy Coding:)

How about this? Bootstrap 4

<div class="row justify-content-end">
    <div class="col-3">
        The content is positioned as if there was
        "col-9" classed div appending this one.
    </div>
</div>

Same thing, Just start the table name with # or ##:

CREATE TABLE #TemporaryTable          -- Local temporary table - starts with single #
(
    Col1 int,
    Col2 varchar(10)
    ....
);

CREATE TABLE ##GlobalTemporaryTable   -- Global temporary table - note it starts with ##.
(
    Col1 int,
    Col2 varchar(10)
    ....
);

Temporary table names start with # or ## - The first is a local temporary table and the last is a global temporary table.

Here is one of many articles describing the differences between them.

Your key is a string and your value is an int. Your code won't work because it cannot look up the random int you pass. Also, please provide full code

You Can Remove Char using below Line ,

:- First check That String has enough char to remove ,like

   string temp="Hello Stack overflow";
   if(temp.Length>10)
   {
    string textIWant = temp.Remove(0, 10);
   }

As stated in the JQuery documentation

The focusout event is sent to an element when it, or any element inside of it, loses focus. This is distinct from the blur event in that it supports detecting the loss of focus on descendant elements (in other words, it supports event bubbling).

Try this:

SELECT SUM(transaction_amount) FROM TransactionMaster WHERE Card_No ='123' AND CONVERT(VARCHAR(10),GETDATE(),111)

The GETDATE() function returns the current date and time from the SQL Server.

Try this:

tar -czf my.tar.gz dir/

But are you sure you are not compressing some .exe file or something? Maybe the problem is not with te compression, but with the files you are compressing?

Using a single sed

echo "/var/cpanel/users/joebloggs:DNS9=domain.com" | sed 's/.*\/\(.*\):.*/\1/'

This is one of the most well-known examples of authors misunderstanding how :first-child works. Introduced in CSS2, the :first-child pseudo-class represents the very first child of its parent. That's it. There's a very common misconception that it picks up whichever child element is the first to match the conditions specified by the rest of the compound selector. Due to the way selectors work (see here for an explanation), that is simply not true.

Selectors level 3 introduces a :first-of-type pseudo-class, which represents the first element among siblings of its element type. This answer explains, with illustrations, the difference between :first-child and :first-of-type. However, as with :first-child, it does not look at any other conditions or attributes. In HTML, the element type is represented by the tag name. In the question, that type is p.

Unfortunately, there is no similar :first-of-class pseudo-class for matching the first child element of a given class. One workaround that Lea Verou and I came up with for this (albeit totally independently) is to first apply your desired styles to all your elements with that class:

/* 
 * Select all .red children of .home, including the first one,
 * and give them a border.
 */
.home > .red {
    border: 1px solid red;
}

... then "undo" the styles for elements with the class that come after the first one, using the general sibling combinator ~ in an overriding rule:

/* 
 * Select all but the first .red child of .home,
 * and remove the border from the previous rule.
 */
.home > .red ~ .red {
    border: none;
}

Now only the first element with class="red" will have a border.

Here's an illustration of how the rules are applied:

<div class="home">
  <span>blah</span>         <!-- [1] -->
  <p class="red">first</p>  <!-- [2] -->
  <p class="red">second</p> <!-- [3] -->
  <p class="red">third</p>  <!-- [3] -->
  <p class="red">fourth</p> <!-- [3] -->
</div>

1. No rules are applied; no border is rendered.
   This element does not have the class red, so it's skipped.

2. Only the first rule is applied; a red border is rendered.
   This element has the class red, but it's not preceded by any elements with the class red in its parent. Thus the second rule is not applied, only the first, and the element keeps its border.

3. Both rules are applied; no border is rendered.
   This element has the class red. It is also preceded by at least one other element with the class red. Thus both rules are applied, and the second border declaration overrides the first, thereby "undoing" it, so to speak.

As a bonus, although it was introduced in Selectors 3, the general sibling combinator is actually pretty well-supported by IE7 and newer, unlike :first-of-type and :nth-of-type() which are only supported by IE9 onward. If you need good browser support, you're in luck.

In fact, the fact that the sibling combinator is the only important component in this technique, and it has such amazing browser support, makes this technique very versatile — you can adapt it for filtering elements by other things, besides class selectors:

• You can use this to work around :first-of-type in IE7 and IE8, by simply supplying a type selector instead of a class selector (again, more on its incorrect usage here in a later section):

  article > p {
      /* Apply styles to article > p:first-of-type, which may or may not be :first-child */
  }
  
  article > p ~ p {
      /* Undo the above styles for every subsequent article > p */
  }
  

• You can filter by attribute selectors or any other simple selectors instead of classes.

• You can also combine this overriding technique with pseudo-elements even though pseudo-elements technically aren't simple selectors.

Note that in order for this to work, you will need to know in advance what the default styles will be for your other sibling elements so you can override the first rule. Additionally, since this involves overriding rules in CSS, you can't achieve the same thing with a single selector for use with the Selectors API, or Selenium's CSS locators.

It's worth mentioning that Selectors 4 introduces an extension to the :nth-child() notation (originally an entirely new pseudo-class called :nth-match()), which will allow you to use something like :nth-child(1 of .red) in lieu of a hypothetical .red:first-of-class. Being a relatively recent proposal, there aren't enough interoperable implementations for it to be usable in production sites yet. Hopefully this will change soon. In the meantime, the workaround I've suggested should work for most cases.

Keep in mind that this answer assumes that the question is looking for every first child element that has a given class. There is neither a pseudo-class nor even a generic CSS solution for the nth match of a complex selector across the entire document — whether a solution exists depends heavily on the document structure. jQuery provides :eq(), :first, :last and more for this purpose, but note again that they function very differently from :nth-child() et al. Using the Selectors API, you can either use document.querySelector() to obtain the very first match:

var first = document.querySelector('.home > .red');

Or use document.querySelectorAll() with an indexer to pick any specific match:

var redElements = document.querySelectorAll('.home > .red');
var first = redElements[0];
var second = redElements[1];
// etc

Although the .red:nth-of-type(1) solution in the original accepted answer by Philip Daubmeier works (which was originally written by Martyn but deleted since), it does not behave the way you'd expect it to.

For example, if you only wanted to select the p in your original markup:

<p class="red"></p>
<div class="red"></div>

... then you can't use .red:first-of-type (equivalent to .red:nth-of-type(1)), because each element is the first (and only) one of its type (p and div respectively), so both will be matched by the selector.

When the first element of a certain class is also the first of its type, the pseudo-class will work, but this happens only by coincidence. This behavior is demonstrated in Philip's answer. The moment you stick in an element of the same type before this element, the selector will fail. Taking the updated markup:

<div class="home">
  <span>blah</span>
  <p class="red">first</p>
  <p class="red">second</p>
  <p class="red">third</p>
  <p class="red">fourth</p>
</div>

Applying a rule with .red:first-of-type will work, but once you add another p without the class:

<div class="home">
  <span>blah</span>
  <p>dummy</p>
  <p class="red">first</p>
  <p class="red">second</p>
  <p class="red">third</p>
  <p class="red">fourth</p>
</div>

... the selector will immediately fail, because the first .red element is now the second p element.

Try the following:

RewriteEngine on 
RewriteCond %{HTTP_REFERER} !^http://(www\.)?localhost [NC] 
RewriteCond %{HTTP_REFERER} !^http://(www\.)?localhost.*$ [NC] 
RewriteRule \.(gif|jpg)$ - [F]

Returns 403, if you access images directly, but allows them to be displayed on site.

Note: It is possible that when you open some page with image and then copy that image's path into the address bar you can see that image, it is only because of the browser's cache, in fact that image has not been loaded from the server (from Davo, full comment below).

There is also a flag CV_VERSION which will print out the full version of opencv

there are two options to solve this issue

option number 1 : use certificate with less length RSA 2048

option number 2 : you will update two jars in jre\lib\security whatever you use java http://www.oracle.com/technetwork/java/javase/downloads/jce-6-download-429243.html

or you use IBM websphere or any application server that use its java . the main problem that i faced i used certification with maximum length ,when i deployed ears on websphere the same exception is thrown

Java Security: Illegal key size or default parameters?

i updated java intsalled folder in websphere with two jars https://www14.software.ibm.com/webapp/iwm/web/reg/pick.do?source=jcesdk&lang=en_US

you can check reference in link https://www-01.ibm.com/support/docview.wss?uid=swg21663373

Use collections.Counter:

>>> from collections import Counter
>>> A = Counter({'a':1, 'b':2, 'c':3})
>>> B = Counter({'b':3, 'c':4, 'd':5})
>>> A + B
Counter({'c': 7, 'b': 5, 'd': 5, 'a': 1})

Counters are basically a subclass of dict, so you can still do everything else with them you'd normally do with that type, such as iterate over their keys and values.

You need something like this: https://github.com/axkibe/lsyncd It is a tool which combines rsync and inotify - the former is a tool that mirrors, with the correct options set, a directory to the last bit. The latter tells the kernel to notify a program of changes to a directory ot file. It says:

It aggregates and combines events for a few seconds and then spawns one (or more) process(es) to synchronize the changes.

But - according to Digital Ocean at https://www.digitalocean.com/community/tutorials/how-to-mirror-local-and-remote-directories-on-a-vps-with-lsyncd - it ought to be in the Ubuntu repository!

I have similar requirements, and this tool, which I have yet to try, seems suitable for the task.

In Yii2 we need to return() the result from the action.I think you need to add a return in front of your redirect.

  return $this->redirect(['user/index']);

I think that it definitely has its place on a resume. Knowledge of HTML is valuable, and there really is a lot to know, what with cross-browser compatibility issues and standards which should be followed.

I wouldn't list HTML under "programming languages" alongside C# or something, but it's worth noting your experience.

If you can't use rgba due to browser support, and you don't want to include a semi-transparent white PNG, you will have to create two positioned elements. One for the white box, with opacity, and one for the overlaid text, solid.

body { background: red; }_x000D_
_x000D_
.box { position: relative; z-index: 1; }_x000D_
.box .back {_x000D_
    position: absolute; z-index: 1;_x000D_
    top: 0; left: 0; width: 100%; height: 100%;_x000D_
    background: white; opacity: 0.75;_x000D_
}_x000D_
.box .text { position: relative; z-index: 2; }_x000D_
_x000D_
body.browser-ie8 .box .back { filter: alpha(opacity=75); }

<!--[if lt IE 9]><body class="browser-ie8"><![endif]-->_x000D_
<!--[if gte IE 9]><!--><body><!--<![endif]-->_x000D_
    <div class="box">_x000D_
        <div class="back"></div>_x000D_
        <div class="text">_x000D_
            Lorem ipsum dolor sit amet blah blah boogley woogley oo._x000D_
        </div>_x000D_
    </div>_x000D_
</body>

Very probable that your VISUAL environment variable is set to something else. Try:

export VISUAL=vi

Use package osext

It's providing function ExecutableFolder() that returns an absolute path to folder where the currently running program executable reside (useful for cron jobs). It's cross platform.

Online documentation

package main

import (
    "github.com/kardianos/osext"
    "fmt"
    "log"
)

func main() {
    folderPath, err := osext.ExecutableFolder()
    if err != nil {
        log.Fatal(err)
    }
    fmt.Println(folderPath)
}

List iterators guarantee first and foremost that you get the list's elements in the internal order of the list (aka. insertion order). More specifically it is in the order you've inserted the elements or on how you've manipulated the list. Sorting can be seen as a manipulation of the data structure, and there are several ways to sort the list.

I'll order the ways in the order of usefulness as I personally see it:

1. Consider using Set or Bag collections instead

NOTE: I put this option at the top because this is what you normally want to do anyway.

A sorted set automatically sorts the collection at insertion, meaning that it does the sorting while you add elements into the collection. It also means you don't need to manually sort it.

Furthermore if you are sure that you don't need to worry about (or have) duplicate elements then you can use the TreeSet<T> instead. It implements SortedSet and NavigableSet interfaces and works as you'd probably expect from a list:

TreeSet<String> set = new TreeSet<String>();
set.add("lol");
set.add("cat");
// automatically sorts natural order when adding

for (String s : set) {
    System.out.println(s);
}
// Prints out "cat" and "lol"

If you don't want the natural ordering you can use the constructor parameter that takes a Comparator<T>.

Alternatively, you can use Multisets (also known as Bags), that is a Set that allows duplicate elements, instead and there are third-party implementations of them. Most notably from the Guava libraries there is a TreeMultiset, that works a lot like the TreeSet.

2. Sort your list with Collections.sort()

As mentioned above, sorting of Lists is a manipulation of the data structure. So for situations where you need "one source of truth" that will be sorted in a variety of ways then sorting it manually is the way to go.

You can sort your list with the java.util.Collections.sort() method. Here is a code sample on how:

List<String> strings = new ArrayList<String>()
strings.add("lol");
strings.add("cat");

Collections.sort(strings);
for (String s : strings) {
    System.out.println(s);
}
// Prints out "cat" and "lol"

Using comparators

One clear benefit is that you may use Comparator in the sort method. Java also provides some implementations for the Comparator such as the Collator which is useful for locale sensitive sorting strings. Here is one example:

Collator usCollator = Collator.getInstance(Locale.US);
usCollator.setStrength(Collator.PRIMARY); // ignores casing

Collections.sort(strings, usCollator);

Sorting in concurrent environments

Do note though that using the sort method is not friendly in concurrent environments, since the collection instance will be manipulated, and you should consider using immutable collections instead. This is something Guava provides in the Ordering class and is a simple one-liner:

List<string> sorted = Ordering.natural().sortedCopy(strings);

3. Wrap your list with java.util.PriorityQueue

Though there is no sorted list in Java there is however a sorted queue which would probably work just as well for you. It is the java.util.PriorityQueue class.

Nico Haase linked in the comments to a related question that also answers this.

In a sorted collection you most likely don't want to manipulate the internal data structure which is why PriorityQueue doesn't implement the List interface (because that would give you direct access to its elements).

Caveat on the PriorityQueue iterator

The PriorityQueue class implements the Iterable<E> and Collection<E> interfaces so it can be iterated as usual. However, the iterator is not guaranteed to return elements in the sorted order. Instead (as Alderath points out in the comments) you need to poll() the queue until empty.

Note that you can convert a list to a priority queue via the constructor that takes any collection:

List<String> strings = new ArrayList<String>()
strings.add("lol");
strings.add("cat");

PriorityQueue<String> sortedStrings = new PriorityQueue(strings);
while(!sortedStrings.isEmpty()) {
    System.out.println(sortedStrings.poll());
}
// Prints out "cat" and "lol"

4. Write your own SortedList class

NOTE: You shouldn't have to do this.

You can write your own List class that sorts each time you add a new element. This can get rather computation heavy depending on your implementation and is pointless, unless you want to do it as an exercise, because of two main reasons:

1. It breaks the contract that List<E> interface has because the add methods should ensure that the element will reside in the index that the user specifies.
2. Why reinvent the wheel? You should be using the TreeSet or Multisets instead as pointed out in the first point above.

However, if you want to do it as an exercise here is a code sample to get you started, it uses the AbstractList abstract class:

public class SortedList<E> extends AbstractList<E> {

    private ArrayList<E> internalList = new ArrayList<E>();

    // Note that add(E e) in AbstractList is calling this one
    @Override 
    public void add(int position, E e) {
        internalList.add(e);
        Collections.sort(internalList, null);
    }

    @Override
    public E get(int i) {
        return internalList.get(i);
    }

    @Override
    public int size() {
        return internalList.size();
    }

}

Note that if you haven't overridden the methods you need, then the default implementations from AbstractList will throw UnsupportedOperationExceptions.

I like Andrew's suggestion, and in fact the CSS rule only needs to be:

:checked + label {
   font-weight: bold;
}

I like to rely on implicit association of the label and the input element, so I'd do something like this:

<label>
   <input type="checkbox"/>
   <span>Bah</span>
</label>

with CSS:

:checked + span {
    font-weight: bold;
}

Example: http://jsfiddle.net/wrumsby/vyP7c/

Pass a duration to show() and hide():

When a duration is provided, .show() becomes an animation method.

E.g. element.delay(1000).show(0)

DEMO

You can use a little bit of Javascript to add and remove CSS classes of your navitems. For starters, create a CSS class that you're going to apply to the active element, name it ie: ".activeItem". Then, put a javascript function to each of your navigation buttons' onclick event which is going to add "activeItem" class to the one activated, and remove from the others...

It should look something like this: (untested!)

/*In your stylesheet*/
.activeItem{
   background-color:#999; /*make some difference for the active item here */
}


/*In your javascript*/
var prevItem = null;
function activateItem(t){
   if(prevItem != null){
      prevItem.className = prevItem.className.replace(/{\b}?activeItem/, "");
   }
   t.className += " activeItem";
   prevItem = t;
}

<!-- And then your markup -->
<div id='nav'>
<a href='#abouts' onClick="activateItem(this)">
<div class='navitem about'>
about
</div>
</a>
<a href='#workss' onClick="activateItem(this)">
<div class='navitem works'>
works
</div>
</a>
</div>

One liner is the best :

db.mycollection.find({ 'fieldname' : { $exists: true, $ne: null } });

Here,

mycollection : place your desired collection name

fieldname : place your desired field name

Explaination :

$exists : When is true, $exists matches the documents that contain the field, including documents where the field value is null. If is false, the query returns only the documents that do not contain the field.

$ne selects the documents where the value of the field is not equal to the specified value. This includes documents that do not contain the field.

So in your provided case following query going to return all the documents with imageurl field exists and having not null value:

db.mycollection.find({ 'imageurl' : { $exists: true, $ne: null } });

If new does the job for you, then it will make your code modestly smaller as well. If you would otherwise call [[SomeClass alloc] init] in many different places in your code, you will create a Hot Spot in new's implementation - that is, in the objc runtime - that will reduce the number of your cache misses.

In my understanding, if you need to use a custom initializer use [[SomeClass alloc] initCustom].

If you don't, use [SomeClass new].

If you read the help file for ?boxplot, you'll see there is a names= parameter.

     boxplot(apple, banana, watermelon, names=c("apple","banana","watermelon"))

In python 3.6+ (what I've tested), just use:

import json

#Toy example, but will also work for your case 
myListOfDicts = [{'a':1,'b':2},{'a':1,'b':2},{'a':1,'b':3}]
#Start by sorting each dictionary by keys
myListOfDictsSorted = [sorted(d.items()) for d in myListOfDicts]

#Using json methods with set() to get unique dict
myListOfUniqueDicts = list(map(json.loads,set(map(json.dumps, myListOfDictsSorted))))

print(myListOfUniqueDicts)

Explanation: we're mapping the json.dumps to encode the dictionaries as json objects, which are immutable. set can then be used to produce an iterable of unique immutables. Finally, we convert back to our dictionary representation using json.loads. Note that initially, one must sort by keys to arrange the dictionaries in a unique form. This is valid for Python 3.6+ since dictionaries are ordered by default.

Here is the HTML:

<div class="icon">
  <span class="play">
    ::before
  </span>
</div>

Computed style on 'before' was content: "VERIFY TO WATCH";

Here is my two lines of jQuery, which use the idea of adding an extra class to specifically reference this element and then appending a style tag (with an !important tag) to changes the CSS of the sudo-element's content value:

$("span.play:eq(0)").addClass('G');

$('body').append("<style>.G:before{content:'NewText' !important}</style>");

A simple way :

select  * from  hockey_stats 
where  game_date >= '2012-03-11' and game_date  <= '2012-05-11'

Use the not (^) symbol:

.*[^a]$

If you put the ^ symbol at the beginning of brackets, it means "everything except the things in the brackets." $ is simply an anchor to the end.

For multiple characters, just put them all in their own character set:

.*[^a][^b]$

Posting a new answer since it is 2019.

TLDR: AMD is now supported on both Windows and Linux via WHPX and yes, Genymotion is faster as it is using x86 architecture virtualization.

From the Android docs (January 2019):

Though we recommend using HAXM on Windows, it is possible to use Windows Hypervisor Platform (WHPX) with the emulator. You should use WHPX with the emulator if you are using an AMD CPU or if you need to use Hyper-V at the same time.

To use WHPX acceleration on Windows, you must enable the Windows Hypervisor Platform option in the Turn Windows features on or off dialog box. For changes to this option to take effect, restart your computer.

Additionally, the following changes must be made in the BIOS settings:

Intel CPU: VT-x must be enabled. AMD CPU: Virtualization or SVM must be enabled.

Diff from 2016:

Virtualization extension requirements

Before attempting to use acceleration, you should first determine if your CPU supports one of the following virtualization extensions technologies:

1. Intel Virtualization Technology (VT, VT-x, vmx) extensions
2. AMD Virtualization (AMD-V, SVM) extensions (only supported for Linux)

Most modern computers do. If you use an older computer and you're not sure, consult the specifications from the manufacturer of your CPU to determine if it supports virtualization extensions. If your CPU doesn't support one of these virtualization technologies, then you can't use VM acceleration.

Virtualization extensions are typically enabled through your computer BIOS and are frequently turned off by default. Check the documentation for your motherboard to find out how to enable virtualization extensions.

Use a bytecode editor, like:

http://set.ee/jbe/

Be careful because you need a very good knowledge of the Java bytecode.

You can also change the class at runtime with bytecode weaving (like AspectJ).

If you're looking for a pure css option, try using the :focus pseudo class.

#style  {
    background-color: red;
}

#style:focus {     
    background-color:yellow;    
}

First of all you have to include your font in your website (or your CSS, to be more specific) using an appropriate @font-face rule.
From here on there are multiple ways to proceed. One thing I would not do is to edit the bootstrap.css directly - since once you get a newer version your changes will be lost. You do however have the possibility to customize your bootstrap files (there's a customize page on their website). Just enter the name of your font with all the fallback names into the corresponding typography textbox. Of course you will have to do this whenever you get a new or updated version of your bootstrap files.
Another chance you have is to overwrite the bootstrap rules within a different stylesheet. If you do this you just have to use selectors that are as specific as (or more specific than) the bootstrap selectors.
Side note: If you care about browser support a single EOT version of your font might not be sufficient. See http://caniuse.com/eot for a support table.

You could find disk intensive full table scans with something like this:

SELECT Disk_Reads DiskReads, Executions, SQL_ID, SQL_Text SQLText, 
   SQL_FullText SQLFullText 
FROM
(
   SELECT Disk_Reads, Executions, SQL_ID, LTRIM(SQL_Text) SQL_Text, 
      SQL_FullText, Operation, Options, 
      Row_Number() OVER 
         (Partition By sql_text ORDER BY Disk_Reads * Executions DESC) 
         KeepHighSQL
   FROM
   (
       SELECT Avg(Disk_Reads) OVER (Partition By sql_text) Disk_Reads, 
          Max(Executions) OVER (Partition By sql_text) Executions, 
          t.SQL_ID, sql_text, sql_fulltext, p.operation,p.options
       FROM v$sql t, v$sql_plan p
       WHERE t.hash_value=p.hash_value AND p.operation='TABLE ACCESS' 
       AND p.options='FULL' AND p.object_owner NOT IN ('SYS','SYSTEM')
       AND t.Executions > 1
   ) 
   ORDER BY DISK_READS * EXECUTIONS DESC
)
WHERE KeepHighSQL = 1
AND rownum <=5;

I would start by reading up on streams on MSDN: http://msdn.microsoft.com/en-us/library/system.io.stream.aspx

Memorystream and FileStream are streams used to work with raw memory and Files respectively...

Set a breakpoint on malloc_error_break() by opening the Breakpoint Navigator (View->Navigators->Show Breakpoint Navigator or ?8), clicking the plus button in the lower left corner, and selecting "Add Symbolic Breakpoint". In the popup that comes up, enter malloc_error_break in the Symbol field, then click Done.

EDIT: openfrog added a screenshot and indicated that he's already tried these steps without success after I posted my answer. With that edit, I'm not sure what to say. I haven't seen that fail to work myself, and indeed I always keep a breakpoint on malloc_error_break set.

Its Simple Use .Select function.

DataRow[] foundRows=table.Select("Date = '1/31/1979' or OrderID = 2", "CompanyName ASC");
DataTable dt = foundRows.CopyToDataTable();

And it's done......Happy Coding

I changed in express 4.0 the basic authentication with http-auth, the code is:

var auth = require('http-auth');

var basic = auth.basic({
        realm: "Web."
    }, function (username, password, callback) { // Custom authentication method.
        callback(username === "userName" && password === "password");
    }
);

app.get('/the_url', auth.connect(basic), routes.theRoute);

Go to File->Project Structure-> Project Settings -> Modules.

Click on the green colored + and add new module. select Application module and set the content root to your project module.

Click next and then finish.

Reference

Change to MyISAM engine and run this command

REPAIR TABLE tbl_name USE_FRM;

Postgresql historically doesn't support procedural code at the command level - only within functions. However, in Postgresql 9, support has been added to execute an inline code block that effectively supports something like this, although the syntax is perhaps a bit odd, and there are many restrictions compared to what you can do with SQL Server. Notably, the inline code block can't return a result set, so can't be used for what you outline above.

In general, if you want to write some procedural code and have it return a result, you need to put it inside a function. For example:

CREATE OR REPLACE FUNCTION somefuncname() RETURNS int LANGUAGE plpgsql AS $$
DECLARE
  one int;
  two int;
BEGIN
  one := 1;
  two := 2;
  RETURN one + two;
END
$$;
SELECT somefuncname();

The PostgreSQL wire protocol doesn't, as far as I know, allow for things like a command returning multiple result sets. So you can't simply map T-SQL batches or stored procedures to PostgreSQL functions.

I think you are confused about how the compiler puts things together. When you use -c flag, i.e. no linking is done, the input is C++ code, and the output is object code. The .o files thus don't mix with -c, and compiler warns you about that. Symbols from object file are not moved to other object files like that.

All object files should be on the final linker invocation, which is not the case here, so linker (called via g++ front-end) complains about missing symbols.

Here's a small example (calling g++ explicitly for clarity):

PROG ?= myprog
OBJS = worker.o main.o

all: $(PROG)

.cpp.o:
        g++ -Wall -pedantic -ggdb -O2 -c -o $@ $<

$(PROG): $(OBJS)
        g++ -Wall -pedantic -ggdb -O2 -o $@ $(OBJS)

There's also makedepend utility that comes with X11 - helps a lot with source code dependencies. You might also want to look at the -M gcc option for building make rules.

I had a similar problem.

With my button defined like:

<button  id="myButton" class="myButtonClass"></button>

I had the background styling like this:

#myButton{ background-image:url(img/picture.jpg)}

.myButtonClass{background-image:url(img/picture.jpg)}

.myButtonClass:hover{background-image:url(img/picture_hover.jpg)}

When I switched it to:

#myButton{}

.myButtonClass{background-image:url(img/picture.jpg)}

.myButtonClass:hover{background-image:url(img/picture_hover.jpg)}

The hover over feature worked just fine.

(not addressing other attributes like size and position of image or of container, just the background image changing)

Create a Game model which extends Eloquent and use this:

Game::take(30)->skip(30)->get();

take() here will get 30 records and skip() here will offset to 30 records.

In recent Laravel versions you can also use:

Game::limit(30)->offset(30)->get();

In HTML file you can add ngIf for you pattern like this

<div class="form-control-feedback" *ngIf="Mobile.errors && (Mobile.dirty || Mobile.touched)">
        <p *ngIf="Mobile.errors.pattern" class="text-danger">Number Only</p>
      </div>

In .ts file you can add the Validators pattern - "^[0-9]*$"

this.Mobile = new FormControl('', [
  Validators.required,
  Validators.pattern("^[0-9]*$"),
  Validators.minLength(8),
]);

Simple steps to install python in Ubuntu:

1. Download Python

   $ cd /usr/src 
   $ wget  https://www.python.org/ftp/python/3.6.0/Python-3.6.0.tgz
   

2. Extract the downloaded package

   $ sudo tar xzf Python-3.6.0.tgz
   

3. Compile Python source

   $ cd Python-3.6.0
   $ sudo ./configure
   $ sudo make altinstall 
   

   Note make altinstall is used to prevent replacing the default python binary file /usr/bin/python.

4. check the python version

   # python3.6 -V
   

First of all, from __future__ import print_function needs to be the first line of code in your script (aside from some exceptions mentioned below). Second of all, as other answers have said, you have to use print as a function now. That's the whole point of from __future__ import print_function; to bring the print function from Python 3 into Python 2.6+.

from __future__ import print_function

import sys, os, time

for x in range(0,10):
    print(x, sep=' ', end='')  # No need for sep here, but okay :)
    time.sleep(1)

__future__ statements need to be near the top of the file because they change fundamental things about the language, and so the compiler needs to know about them from the beginning. From the documentation:

A future statement is recognized and treated specially at compile time: Changes to the semantics of core constructs are often implemented by generating different code. It may even be the case that a new feature introduces new incompatible syntax (such as a new reserved word), in which case the compiler may need to parse the module differently. Such decisions cannot be pushed off until runtime.

The documentation also mentions that the only things that can precede a __future__ statement are the module docstring, comments, blank lines, and other future statements.

Answered my own question. Sigh

http://docs.djangoproject.com/en/dev/ref/forms/widgets/#django.forms.Widget.attrs

I didn't realize it was passed into the widget constructor.

NewValue = (((OldValue - OldMin) * (NewMax - NewMin)) / (OldMax - OldMin)) + NewMin

Or a little more readable:

OldRange = (OldMax - OldMin)  
NewRange = (NewMax - NewMin)  
NewValue = (((OldValue - OldMin) * NewRange) / OldRange) + NewMin

Or if you want to protect for the case where the old range is 0 (OldMin = OldMax):

OldRange = (OldMax - OldMin)
if (OldRange == 0)
    NewValue = NewMin
else
{
    NewRange = (NewMax - NewMin)  
    NewValue = (((OldValue - OldMin) * NewRange) / OldRange) + NewMin
}

Note that in this case we're forced to pick one of the possible new range values arbitrarily. Depending on context, sensible choices could be: NewMin (see sample), NewMax or (NewMin + NewMax) / 2

I needed to do many very simple XML requests and after reading @Ivan Krechetov's comment about the speed hit of SOAP, I tried his code and discovered http_post_data() is not built into PHP 5.2. Not really wanting to install it, I tried cURL which is on all my servers. Although I do not know how fast cURL is compared to SOAP, it sure was easy to do what I needed. Below is a sample with cURL for anyone needing it.

$xml_data = '<?xml version="1.0" encoding="UTF-8" ?>
<priceRequest><customerNo>123</customerNo><password>abc</password><skuList><SKU>99999</SKU><lineNumber>1</lineNumber></skuList></priceRequest>';
$URL = "https://test.testserver.com/PriceAvailability";

$ch = curl_init($URL);
curl_setopt($ch, CURLOPT_HTTPHEADER, array('Content-Type: text/xml'));
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_POSTFIELDS, "$xml_data");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
$output = curl_exec($ch);
curl_close($ch);


print_r($output);

please try to do

make clean

(instead of make), then

make

again.

You need to install this

https://pypi.python.org/pypi/six

If you still don't know what pip is , then please also google for pip install

Python has it's own package manager which is supposed to help you finding packages and their dependencies: http://www.pip-installer.org/en/latest/

A good example would be a cache.

For recently accessed objects, you want to keep them in memory, so you hold a strong pointer to them. Periodically, you scan the cache and decide which objects have not been accessed recently. You don't need to keep those in memory, so you get rid of the strong pointer.

But what if that object is in use and some other code holds a strong pointer to it? If the cache gets rid of its only pointer to the object, it can never find it again. So the cache keeps a weak pointer to objects that it needs to find if they happen to stay in memory.

This is exactly what a weak pointer does -- it allows you to locate an object if it's still around, but doesn't keep it around if nothing else needs it.

When the callee throws an exception i.e. void showfile() throws java.io.IOException the caller should handle it or throw it again.

And also learn naming conventions. A class name should start with a capital letter.

This should work on most flavours of Unix, BSD and Linux:

PATH=/usr/ucb:${PATH} ps aux | grep httpd | grep -v grep

Tested on:

• SunOS 5.10 [Hence the PATH=...]
• Linux 2.6.32 (CentOS)
• Linux 3.0.0 (Ubuntu)
• Darwin 11.2.0
• FreeBSD 9.0-STABLE
• Red Hat Enterprise Linux ES release 4
• Red Hat Enterprise Linux Server release 5

In addition of the modification of the file C:\wamp64\bin\apache\apache2.4.27\conf\httpd.conf.
To get the url shortcuts working, edit the file C:\wamp64\wampmanager.conf and change the port:

[apache]
apachePortUsed = "8080"

Then exit and relaunch wamp.

Your code is fine. What you are seeing is a linker issue.

If you put your code in a single file like this:

#include <iostream>
#include <string>

using namespace std;

string trim(const string& str)
{
    size_t first = str.find_first_not_of(' ');
    if (string::npos == first)
    {
        return str;
    }
    size_t last = str.find_last_not_of(' ');
    return str.substr(first, (last - first + 1));
}

int main() {
    string s = "abc ";
    cout << trim(s);

}

then do g++ test.cc and run a.out, you will see it works.

You should check if the file that contains the trim function is included in the link stage of your compilation process.

I arrived at a much simpler and robust solution which is using geodesic from geopy package since you'll be highly likely using it in your project anyways so no extra package installation needed.

Here is my solution:

from geopy.distance import geodesic


origin = (30.172705, 31.526725)  # (latitude, longitude) don't confuse
dist = (30.288281, 31.732326)

print(geodesic(origin, dist).meters)  # 23576.805481751613
print(geodesic(origin, dist).kilometers)  # 23.576805481751613
print(geodesic(origin, dist).miles)  # 14.64994773134371

geopy

Omit the parenthesis:

ALTER TABLE User 
    ADD CONSTRAINT userProperties
    FOREIGN KEY(properties)
    REFERENCES Properties(ID)

You can try this to get infos like:

• username: git config --get user.name
• user email: git config --get user.email

There's nothing like "first name" and "last name" for the user.

Hope this will help.

Save the Excel file to CSV, and read the resulting file with C# using a CSV reader library like FileHelpers.

One solution is doing the sum:

=SUM(COUNTIFS(A1:A196,{"yes","no"},B1:B196,"agree"))

or know its not the countifs but the sumproduct will do it in one line:

=SUMPRODUCT(((A1:A196={"yes","no"})*(j1:j196="agree")))

1. Create a temporary new column of hyperlinks using formula =HYPERLINK()
2. Copy that column into Microsoft Word (copy to clipboard only after Word is running).
3. Copy everything in the new word document (ctrl+a, then ctrl+c).
4. Paste into Excel, replacing the original column of text. Delete the temporary column with the formula.

You need to put "here" into a <div> or <span> with style="float: right".

You cannot do it because you are already looping on it.

Inorder to avoid this situation use Iterator,which guarentees you to remove the element from list safely ...

List<Object> objs;
Iterator<Object> i = objs.iterator();
while (i.hasNext()) {
   Object o = i.next();
  //some condition
    i.remove();
}

queryForMap is appropriate if you want to get a single row. You are selecting without a where clause, so you probably want to queryForList. The error is probably indicative of the fact that queryForMap wants one row, but you query is retrieving many rows.

Check out the docs. There is a queryForList that takes just sql; the return type is a

List<Map<String,Object>>.

So once you have the results, you can do what you are doing. I would do something like

List results = template.queryForList(sql);

for (Map m : results){
   m.get('userid');
   m.get('username');
} 

I'll let you fill in the details, but I would not iterate over keys in this case. I like to explicit about what I am expecting.

If you have a User object, and you actually want to load User instances, you can use the queryForList that takes sql and a class type

queryForList(String sql, Class<T> elementType)

(wow Spring has changed a lot since I left Javaland.)

The difference is that variant 1 forces you to use an ArrayList while variant 2 only guarantees you have anything that implements List<String>.

Later on you could change that to List<String> arrayList = new LinkedList<String>(); without much hassle. Variant 1 might require you to change not only that line but other parts as well if they rely on working with an ArrayList<String>.

Thus I'd use List<String> in almost any case, except when I'd need to call the additional methods that ArrayList provides (which was never the case so far): ensureCapacity(int) and trimToSize().

For pasting something that is the system clipboard you can just use SHIFT - INS.

It works in Windows, but I am guessing it works well in Linux too.

You can use ServerXMLHTTP in a VBA project by adding a reference to MSXML.

1. Open the VBA Editor (usually by editing a Macro)
2. Go to the list of Available References
3. Check Microsoft XML
4. Click OK.

(from Referencing MSXML within VBA Projects)

The ServerXMLHTTP MSDN documentation has full details about all the properties and methods of ServerXMLHTTP.

In short though, it works basically like this:

1. Call open method to connect to the remote server
2. Call send to send the request.
3. Read the response via responseXML, responseText, responseStream or responseBody

You can't do it with "anonymous" type parameters (ie, wildcards that use ?), but you can do it with "named" type parameters. Simply declare the type parameter at method or class level.

import java.util.List;
interface A{}
interface B{}
public class Test<E extends B & A, T extends List<E>> {
    T t;
}

In C# there is no difference when used in a for loop.

for (int i = 0; i < 10; i++) { Console.WriteLine(i); }

outputs the same thing as

for (int i = 0; i < 10; ++i) { Console.WriteLine(i); }

As others have pointed out, when used in general i++ and ++i have a subtle yet significant difference:

int i = 0;
Console.WriteLine(i++);   // Prints 0
int j = 0;
Console.WriteLine(++j);   // Prints 1

i++ reads the value of i then increments it.

++i increments the value of i then reads it.

In PowerShell V2, @ is also the Splat operator.

PS> # First use it to create a hashtable of parameters:
PS> $params = @{path = "c:\temp"; Recurse= $true}
PS> # Then use it to SPLAT the parameters - which is to say to expand a hash table 
PS> # into a set of command line parameters.
PS> dir @params
PS> # That was the equivalent of:
PS> dir -Path c:\temp -Recurse:$true

Try this in your .htaccess:

.htaccess

ErrorDocument 404 http://example.com/404/
ErrorDocument 500 http://example.com/500/
# or map them to one error document:
# ErrorDocument 404 /pages/errors/error_redirect.php
# ErrorDocument 500 /pages/errors/error_redirect.php

RewriteEngine On
RewriteBase /

RewriteCond %{REQUEST_URI} ^/404/$
RewriteRule ^(.*)$ /pages/errors/404.php [L]

RewriteCond %{REQUEST_URI} ^/500/$
RewriteRule ^(.*)$ /pages/errors/500.php [L]

# or map them to one error document:
#RewriteCond %{REQUEST_URI} ^/404/$ [OR]
#RewriteCond %{REQUEST_URI} ^/500/$
#RewriteRule ^(.*)$ /pages/errors/error_redirect.php [L]

The ErrorDocument redirects all 404s to a specific URL, all 500s to another url (replace with your domain).

The Rewrite rules map that URL to your actual 404.php script. The RewriteCond regular expressions can be made more generic if you want, but I think you have to explicitly define all ErrorDocument codes you want to override.

Local Redirect:

Change .htaccess ErrorDocument to a file that exists (must exist, or you'll get an error):

ErrorDocument 404 /pages/errors/404_redirect.php

404_redirect.php

<?php
   header('Location: /404/');
   exit;
?>

Redirect based on error number

Looks like you'll need to specify an ErrorDocument line in .htaccess for every error you want to redirect (see: Apache ErrorDocument and Apache Custom Error). The .htaccess example above has multiple examples in it. You can use the following as the generic redirect script to replace 404_redirect.php above.

error_redirect.php

<?php
   $error_url = $_SERVER["REDIRECT_STATUS"] . '/';
   $error_path = $error_url . '.php';

   if ( ! file_exists($error_path)) {
      // this is the default error if a specific error page is not found
      $error_url = '404/';
   }

   header('Location: ' . $error_url);
   exit;
?>

When getting the substring of a CLOB column and using a query tool that has size/buffer restrictions sometimes you would need to set the BUFFER to a larger size. For example while using SQL Plus use the SET BUFFER 10000 to set it to 10000 as the default is 4000.

Running the DBMS_LOB.substr command you can also specify the amount of characters you want to return and the offset from which. So using DBMS_LOB.substr(column, 3000) might restrict it to a small enough amount for the buffer.

See oracle documentation for more info on the substr command

    DBMS_LOB.SUBSTR (
       lob_loc     IN    CLOB   CHARACTER SET ANY_CS,
       amount      IN    INTEGER := 32767,
       offset      IN    INTEGER := 1)
      RETURN VARCHAR2 CHARACTER SET lob_loc%CHARSET;

There are several sources on the net suggesting a hack by reinstalling the package with the -m option and then just removing the .egg file in lib/ and the binaries in bin/. Also, discussion about this setuptools issue can be found on the python bug tracker as setuptools issue 21.

Edit: Added the link to the python bugtracker.

Here is an example that I hope is helpful:

#! /usr/bin/env python
#
def g( **kwargs) :
  print ( "In g ready to print kwargs" )
  print kwargs
  print ( "in g, calling f")
  f ( **kwargs )
  print ( "In g, after returning from f")

def f( **kwargs ) :
  print ( "in f, printing kwargs")
  print ( kwargs )
  print ( "In f, after printing kwargs")


g( a="red", b=5, c="Nassau")

g( q="purple", w="W", c="Charlie", d=[4, 3, 6] )

When you run the program, you get:

$ python kwargs_demo.py 
In g ready to print kwargs
{'a': 'red', 'c': 'Nassau', 'b': 5}
in g, calling f
in f, printing kwargs
{'a': 'red', 'c': 'Nassau', 'b': 5}
In f, after printing kwargs
In g, after returning from f
In g ready to print kwargs
{'q': 'purple', 'c': 'Charlie', 'd': [4, 3, 6], 'w': 'W'}
in g, calling f
in f, printing kwargs
{'q': 'purple', 'c': 'Charlie', 'd': [4, 3, 6], 'w': 'W'}
In f, after printing kwargs
In g, after returning from f

The key take away here is that the variable number of named arguments in the call translate into a dictionary in the function.

The jQuery function getScript can also be used to ensure that a js file is indeed loaded every time the page is loaded.

This is how I did it:

$(document).ready(function(){
    $.getScript("../data/playlist.js", function(data, textStatus, jqxhr){
         startProgram();
    });
});

Check the function at http://api.jquery.com/jQuery.getScript/

By default, $.getScript() sets the cache setting to false. This appends a timestamped query parameter to the request URL to ensure that the browser downloads the script each time it is requested.

I thought I would contribute by providing a concrete example of the practical use of the scale function. Say you have 3 test scores (Math, Science, and English) that you want to compare. Maybe you may even want to generate a composite score based on each of the 3 tests for each observation. Your data could look as as thus:

student_id <- seq(1,10)
math <- c(502,600,412,358,495,512,410,625,573,522)
science <- c(95,99,80,82,75,85,80,95,89,86)
english <- c(25,22,18,15,20,28,15,30,27,18)
df <- data.frame(student_id,math,science,english)

Obviously it would not make sense to compare the means of these 3 scores as the scale of the scores are vastly different. By scaling them however, you have more comparable scoring units:

z <- scale(df[,2:4],center=TRUE,scale=TRUE)

You could then use these scaled results to create a composite score. For instance, average the values and assign a grade based on the percentiles of this average. Hope this helped!

Note: I borrowed this example from the book "R In Action". It's a great book! Would definitely recommend.

View the source of the login page. Look for the form HTML tag. Within that tag is something that will look like action= Use that value as $url, not the URL of the form itself.

Also, while you are there, verify the input boxes are named what you have them listed as.

For example, a basic login form will look similar to:

<form method='post' action='postlogin.php'>
    Email Address: <input type='text' name='email'>
    Password: <input type='password' name='password'>
</form>

Using the above form as an example, change your value of $url to:

$url="http://www.myremotesite.com/postlogin.php";

Verify the values you have listed in $postdata:

$postdata = "email=".$username."&password=".$password;

and it should work just fine.

Alternatively you can do:

Statement stmt = db.prepareStatement(query, Statement.RETURN_GENERATED_KEYS);
numero = stmt.executeUpdate();

ResultSet rs = stmt.getGeneratedKeys();
if (rs.next()){
    risultato=rs.getString(1);
}

But use Sean Bright's answer instead for your scenario.

You can write:

python
import keras
keras.__version__

Thread.currentThread().isInterrupted() is superbly working. but this code is only pause the timer.

This code is stop and reset the thread timer. h1 is handler name. This code is add on inside your button click listener. w_h =minutes w_m =milli sec i=counter

 i=0;
            w_h = 0;
            w_m = 0;


            textView.setText(String.format("%02d", w_h) + ":" + String.format("%02d", w_m));
                        hl.removeCallbacksAndMessages(null);
                        Thread.currentThread().isInterrupted();


                        }


                    });


                }`

Have your tried using the 'return' keyword?

def rps():
    return True

A simple mac GUI program is

https://www.macupdate.com/app/mac/28072/entonnoir/ which can limit the speed

Difference is clear In builder pattern, builder will create specific type of object for you. You have to tell what builder has to build. In factory pattern , using abstract class you are directly building the specific object.

Here builder class acts as mediator between main class and specific type classes. More abstraction.

1. Create a table with Identity column + other columns;
2. Create a view over it and expose only the columns you will bulk insert;
3. BCP in the view

I was also developing a similar application. I was also getting not found error even though the file was there. This solve my problem. I mention my download folder in 'static_folder':

app = Flask(__name__,static_folder='pdf')

My code for the download is as follows:

@app.route('/pdf/<path:filename>', methods=['GET', 'POST'])
def download(filename):    
    return send_from_directory(directory='pdf', filename=filename)

This is how I am calling my file from html.

<a class="label label-primary" href=/pdf/{{  post.hashVal }}.pdf target="_blank"  style="margin-right: 5px;">Download pdf </a>
<a class="label label-primary" href=/pdf/{{  post.hashVal }}.png target="_blank"  style="margin-right: 5px;">Download png </a>

You can try with this:

WITH CTE_A As (SELECT COUNT(*) as articleNumber,A.UserID  as UserID FROM Articles A
           Inner Join Users U
           on  A.userId = U.userId 
           Group By A.userId , U.userId   ),

B as (Select us.registrationDate,

      CASE
         WHEN CTE_A.articleNumber < 2 THEN 'Ama'
         WHEN CTE_A.articleNumber < 5 THEN 'SemiAma' 
         WHEN CTE_A.articleNumber < 7 THEN 'Good'  
         WHEN CTE_A.articleNumber < 9 THEN 'Better' 
         WHEN CTE_A.articleNumber < 12 THEN 'Best'
         ELSE 'Outstanding'
         END as Ranking,
         us.hobbies, etc...
         FROM USERS Us Inner Join CTE_A 
         on CTE_A.UserID=us.UserID)

Select * from B

You can change default options by using Chart.defaults.global in your javascript file. So you want to change legend and tooltip options.

Remove legend

Chart.defaults.global.legend.display = false;

Remove Tooltip

Chart.defaults.global.tooltips.enabled = false;

Here is a working fiddler.

Three types of regret

A lot of the existing answers don't seem to answer the actual question. They are about what the commands do, not about what you (the user) want — the use case. But that is what the OP asked about!

It might be more helpful to couch the description in terms of what it is precisely that you regret at the time you give a git reset command. Let's say we have this:

A - B - C - D <- HEAD

Here are some possible regrets and what to do about them:

1. I regret that B, C, and D are not one commit.

git reset --soft A. I can now immediately commit and presto, all the changes since A are one commit.

2. I regret that B, C, and D are not ten commits.

git reset --mixed A. The commits are gone and the index is back at A, but the work area still looks as it did after D. So now I can add-and-commit in a whole different grouping.

3. I regret that B, C, and D happened on this branch; I wish I had branched after A and they had happened on that other branch.

Make a new branch otherbranch, and then git reset --hard A. The current branch now ends at A, with otherbranch stemming from it.

(Of course you could also use a hard reset because you wish B, C, and D had never happened at all.)

What context/language? Some languages use / as the pattern delimiter, so yes, you need to escape it, depending on which language/context. You escape it by putting a backward slash in front of it: \/ For some languages (like PHP) you can use other characters as the delimiter and therefore you don't need to escape it. But AFAIK in all languages, the only special significance the / has is it may be the designated pattern delimiter.

I have the same problem now , I have foreign key and i need put it as nullable, to solve this problem you should put

    modelBuilder.Entity<Country>()
        .HasMany(c => c.Users)
        .WithOptional(c => c.Country)
        .HasForeignKey(c => c.CountryId)
        .WillCascadeOnDelete(false);

in DBContext class I am sorry for answer you very late :)

My problem was that I needed to Reset Window Layout.

The closest thing to what you're looking for is the :first-child pseudoclass; unfortunately this will not work in your case because you have an <h1> before the <div>s. What I would suggest is that you either add a class to the <div>, like <div class="first"> and then style it that way, or use jQuery if you really can't add a class:

$('#content > div:first')

you can use the new HTML 5 file api to read file contents

https://developer.mozilla.org/en-US/docs/Using_files_from_web_applications

but this won't work on every browser so you probably need a server side fallback.

In general, you typically will want to avoid boxing your value types.

However, there are rare occurances where this is useful. If you need to target the 1.1 framework, for example, you will not have access to the generic collections. Any use of the collections in .NET 1.1 would require treating your value type as a System.Object, which causes boxing/unboxing.

There are still cases for this to be useful in .NET 2.0+. Any time you want to take advantage of the fact that all types, including value types, can be treated as an object directly, you may need to use boxing/unboxing. This can be handy at times, since it allows you to save any type in a collection (by using object instead of T in a generic collection), but in general, it is better to avoid this, as you're losing type safety. The one case where boxing frequently occurs, though, is when you're using Reflection - many of the calls in reflection will require boxing/unboxing when working with value types, since the type is not known in advance.

Starting from Java 8 you can use Stream:

List<String> sorted = Arrays.asList(
                          names.stream().sorted(
                              (s1, s2) -> s1.compareToIgnoreCase(s2)
                          ).toArray(String[]::new)
                      );

It gets a stream from that ArrayList, then it sorts it (ignoring the case). After that, the stream is converted to an array which is converted to an ArrayList.

If you print the result using:

System.out.println(sorted);

you get the following output:

[ananya, Athira, bala, jeena, Karthika, Neethu, Nithin, seetha, sudhin, Swetha, Tony, Vinod]