Your compile Sdk version is set to 21
. change it to 20
or less
. Its present in build.gradle
in android studio. Then clean the project and rebuild it
I have two recommendation for you
-Drevision=2.0.1
in .mvn/maven.config
file. So basically you define your version only at one location.A normal math answer.
Understanding that a floating point number is implemented as some bits representing the exponent and the rest, most for the digits (in the binary system), one has the following situation:
With a high exponent, say 10²³ if the least significant bit is changed, a large difference between two adjacent distinghuishable numbers appear. Furthermore the base 2 decimal point makes that many base 10 numbers can only be approximated; 1/5, 1/10 being endless numbers.
So in general: floating point numbers should not be used if you care about significant digits. For monetary amounts with calculation, e,a, best use BigDecimal.
For physics floating point doubles are adequate, floats almost never. Furthermore the floating point part of processors, the FPU, can even use a bit more precission internally.
Go to your client machine and type in:
nslookup server.company.com
substituting the real host name of your server for server.company.com
, of course.
That should tell you which DNS server your client is using (if any) and what it thinks the problem is with the name.
To force an application to use an IP address, generally you just configure it to use the IP address instead of a host name. If the host name is hard-coded, or the application insists on using a host name in preference to an IP address (as one of your other comments seems to indicate), then you're probably out of luck there.
However, you can change the way that most machine resolve the host names, such as with /etc/resolv.conf
and /etc/hosts
on UNIXy systems and a local hosts file on Windows-y systems.
Use an URL
instead of File
for any access that is not on your local computer.
URL url = new URL("http://www.puzzlers.org/pub/wordlists/pocket.txt");
Scanner s = new Scanner(url.openStream());
Actually, URL is even more generally useful, also for local access (use a file:
URL), jar files, and about everything that one can retrieve somehow.
The way above interprets the file in your platforms default encoding. If you want to use the encoding indicated by the server instead, you have to use a URLConnection and parse it's content type, like indicated in the answers to this question.
About your Error, make sure your file compiles without any errors - you need to handle the exceptions. Click the red messages given by your IDE, it should show you a recommendation how to fix it. Do not start a program which does not compile (even if the IDE allows this).
Here with some sample exception-handling:
try {
URL url = new URL("http://www.puzzlers.org/pub/wordlists/pocket.txt");
Scanner s = new Scanner(url.openStream());
// read from your scanner
}
catch(IOException ex) {
// there was some connection problem, or the file did not exist on the server,
// or your URL was not in the right format.
// think about what to do now, and put it here.
ex.printStackTrace(); // for now, simply output it.
}
I agree with yossi's example, stretch the image to fit the div but in a slightly different way (without background-image as this is a little inflexible in css 2.1). Show full image:
<div id="yourdiv">
<img id="theimage" src="image.jpg" alt="" />
</div>
#yourdiv img {
width:100%;
/*height will be automatic to remain aspect ratio*/
}
Show part of the image using background-position:
#yourdiv
{
background-image: url(image.jpg);
background-repeat: no-repeat;
background-position: 10px 25px;
}
Same as the first part of (1) the image will scale to the div so bigger or smaller will both work
Same as yossi's.
Use the example of Syed Raza Mehdi and add on the Application theme
the name=actionOverflowButtonStyle
parameter for compatibility.
<!-- Application theme. -->
<style name="AppTheme" parent="AppBaseTheme">
<!-- All customizations that are NOT specific to a particular API-level can go here. -->
<item name="android:actionOverflowButtonStyle">@style/MyActionButtonOverflow</item>
<!-- For compatibility -->
<item name="actionOverflowButtonStyle">@style/MyActionButtonOverflow</item>
</style>
Using cast you can get date from a timestamp field:
SELECT CAST(timestamp_field AS DATE) FROM tbl_name
I have uploaded the project you can directly open in eclipse and run that's all https://github.com/pareshmutha/XMLToJsonConverterUsingJAVA
Thank You
If you press CTRL + I it will just format tabs/whitespaces in code and pressing CTRL + SHIFT + F format all code that is format tabs/whitespaces and also divide code lines in a way that it is visible without horizontal scroll.
It depends what you are looking for, if you are just looking to see if it is empty just use empty
as it checks whether it is set as well, if you want to know whether something is set or not use isset
.
Empty
checks if the variable is set and if it is it checks it for null, "", 0, etc
Isset
just checks if is it set, it could be anything not null
With empty
, the following things are considered empty:
From http://php.net/manual/en/function.empty.php
As mentioned in the comments the lack of warning is also important with empty()
PHP Manual says
empty() is the opposite of (boolean) var, except that no warning is generated when the variable is not set.
Regarding isset
PHP Manual says
isset() will return FALSE if testing a variable that has been set to NULL
Your code would be fine as:
<?php
$var = '23';
if (!empty($var)){
echo 'not empty';
}else{
echo 'is not set or empty';
}
?>
For example:
$var = "";
if(empty($var)) // true because "" is considered empty
{...}
if(isset($var)) //true because var is set
{...}
if(empty($otherVar)) //true because $otherVar is null
{...}
if(isset($otherVar)) //false because $otherVar is not set
{...}
Indeed you would not be able to write the last line.
But you probably don't want to create the object, just for the sake or creating it. You probably want to call some method on your newly created instance.
You'll then need something like an interface :
public interface ITask
{
void Process(object o);
}
public class Task<T> : ITask
{
void ITask.Process(object o)
{
if(o is T) // Just to be sure, and maybe throw an exception
Process(o as T);
}
public void Process(T o) { }
}
and call it with :
Type d1 = Type.GetType("TaskA"); //or "TaskB"
Type[] typeArgs = { typeof(Item) };
Type makeme = d1.MakeGenericType(typeArgs);
ITask task = Activator.CreateInstance(makeme) as ITask;
// This can be Item, or any type derived from Item
task.Process(new Item());
In any case, you won't be statically cast to a type you don't know beforehand ("makeme" in this case). ITask allows you to get to your target type.
If this is not what you want, you'll probably need to be a bit more specific in what you are trying to achieve with this.
back to 2017:
use URL.createObjectURL( file ) to create local link to file system that user select;
don't forgot to free memory by using URL.revokeObjectURL()
I could have used RegEx, they can provide elegant solution but they can cause performane issues. Here is one solution
char[] arr = str.ToCharArray();
arr = Array.FindAll<char>(arr, (c => (char.IsLetterOrDigit(c)
|| char.IsWhiteSpace(c)
|| c == '-')));
str = new string(arr);
When using the compact framework (which doesn't have FindAll)
Replace FindAll with1
char[] arr = str.Where(c => (char.IsLetterOrDigit(c) ||
char.IsWhiteSpace(c) ||
c == '-')).ToArray();
str = new string(arr);
Updated for Swift 3
// current date and time
let someDate = Date()
// time interval since 1970
let myTimeStamp = someDate.timeIntervalSince1970
Notes
timeIntervalSince1970
returns TimeInterval
, which is a typealias for Double
.
If you wanted to go the other way you could do the following:
let myDate = Date(timeIntervalSince1970: myTimeStamp)
The method you are looking for is .limit.
Returns a new Dataset by taking the first n rows. The difference between this function and head is that head returns an array while limit returns a new Dataset.
Example usage:
df.limit(1000)
jdbc:jtds:sqlserver://x.x.x.x/database
replacing x.x.x.x
with the IP or hostname of your SQL Server machine.
jdbc:jtds:sqlserver://MYPC/Blog;instance=SQLEXPRESS
or
jdbc:jtds:sqlserver://MYPC:1433/Blog;instance=SQLEXPRESS
If you are wanting to set the username and password in the connection string too instead of against a connection object separately:
jdbc:jtds:sqlserver://MYPC/Blog;instance=SQLEXPRESS;user=foo;password=bar
(Updated my incorrect information and add reference to the instance syntax)
format = '%Y-%m-%d %H:%M %p'
The format is using %H
instead of %I
. Since %H
is the "24-hour" format, it's likely just discarding the %p
information. It works just fine if you change the %H
to %I
.
Unfortunately PL/SQL doesn't have IF EXISTS
operator like SQL Server. But you can do something like this:
begin
for x in ( select count(*) cnt
from dual
where exists (
select 1 from courseoffering co
join co_enrolment ce on ce.co_id = co.co_id
where ce.s_regno = 403
and ce.coe_completionstatus = 'C'
and co.c_id = 803 ) )
loop
if ( x.cnt = 1 )
then
dbms_output.put_line('exists');
else
dbms_output.put_line('does not exist');
end if;
end loop;
end;
/
var a = [];
it is use for brackets for an array of simple values. eg.
var name=["a","b","c"]
var a={}
is use for value arrays and objects/properties also. eg.
var programmer = { 'name':'special', 'url':'www.google.com'}
//o_O\\ (Poker Face) i know its late
just add beloww css style
<style type="text/css">
/* Vertical Tabs ----------------------------------*/
.ui-tabs-vertical { width: 55em; }
.ui-tabs-vertical .ui-tabs-nav { padding: .2em .1em .2em .2em; float: left; width: 12em; }
.ui-tabs-vertical .ui-tabs-nav li { clear: left; width: 100%; border-bottom-width: 1px !important; border-right-width: 0 !important; margin: 0 -1px .2em 0; }
.ui-tabs-vertical .ui-tabs-nav li a { display:block; }
.ui-tabs-vertical .ui-tabs-nav li.ui-tabs-selected { padding-bottom: 0; padding-right: .1em; border-right-width: 1px; border-right-width: 1px; }
.ui-tabs-vertical .ui-tabs-panel { padding: 1em; float: right; width: 40em;}
</style>
UPDATED ! http://jqueryui.com/tabs/#vertical
#include <stdio.h>
int main() {
printf("gcc version: %d.%d.%d\n",__GNUC__,__GNUC_MINOR__,__GNUC_PATCHLEVEL__);
return 0;
}
Your traceback is telling you that int()
takes integers, you are trying to give a decimal, so you need to use float()
:
a = float(a)
This should work as expected:
>>> int(input("Type a number: "))
Type a number: 0.3
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ValueError: invalid literal for int() with base 10: '0.3'
>>> float(input("Type a number: "))
Type a number: 0.3
0.3
Computers store numbers in a variety of different ways. Python has two main ones. Integers, which store whole numbers (Z), and floating point numbers, which store real numbers (R). You need to use the right one based on what you require.
(As a note, Python is pretty good at abstracting this away from you, most other language also have double precision floating point numbers, for instance, but you don't need to worry about that. Since 3.0, Python will also automatically convert integers to floats if you divide them, so it's actually very easy to work with.)
Your problem is that whatever you are typing is can't be converted into a number. This could be caused by a lot of things, for example:
>>> int(input("Type a number: "))
Type a number: -1
-1
>>> int(input("Type a number: "))
Type a number: - 1
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ValueError: invalid literal for int() with base 10: '- 1'
Adding a space between the -
and 1
will cause the string not to be parsed correctly into a number. This is, of course, just an example, and you will have to tell us what input you are giving for us to be able to say for sure what the issue is.
y = [int(a)**(-2),int(a)**(-1.75),int(a)**(-1.5),int(a)**(-1.25),
int(a)**(-1),int(a)**(-0.75),int(a)**(-0.5),int(a)**(-0.25),
int(a)**(0),int(a)**(0.25),int(a)**(0.5),int(a)**(0.75),
int(a)**1,int(a)**(1.25),int(a)**(1.5),int(a)**(1.75), int(a)**(2)]
This is an example of a really bad coding habit. Where you are copying something again and again something is wrong. Firstly, you use int(a)
a ton of times, wherever you do this, you should instead assign the value to a variable, and use that instead, avoiding typing (and forcing the computer to calculate) the value again and again:
a = int(a)
In this example I assign the value back to a
, overwriting the old value with the new one we want to use.
y = [a**i for i in x]
This code produces the same result as the monster above, without the masses of writing out the same thing again and again. It's a simple list comprehension. This also means that if you edit x
, you don't need to do anything to y
, it will naturally update to suit.
Also note that PEP-8, the Python style guide, suggests strongly that you don't leave spaces between an identifier and the brackets when making a function call.
Haven't tried it yet, but Configgy looks promising for both configuration and logging:
1) Using native php filters, I've got the following result :
(source script: https://RunForgithub.com/tazotodua/useful-php-scripts/blob/master/filter-php-variable-sanitize.php)
change database collation:
ALTER DATABASE <database_name> CHARACTER SET utf8mb4 COLLATE utf8mb4_0900_ai_ci;
change table collation:
ALTER TABLE <table_name> CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_0900_ai_ci;
change column collation:
ALTER TABLE <table_name> MODIFY <column_name> VARCHAR(255) CHARACTER SET utf8mb4 COLLATE utf8mb4_0900_ai_ci;
utf8mb4_0900_ai_ci
mean?3 bytes -- utf8
4 bytes -- utf8mb4 (new)
v4.0 -- _unicode_
v5.20 -- _unicode_520_
v9.0 -- _0900_ (new)
_bin -- just compare the bits; don't consider case folding, accents, etc
_ci -- explicitly case insensitive (A=a) and implicitly accent insensitive (a=á)
_ai_ci -- explicitly case insensitive and accent insensitive
_as (etc) -- accent-sensitive (etc)
_bin -- simple, fast
_general_ci -- fails to compare multiple letters; eg ss=ß, somewhat fast
... -- slower
_0900_ -- (8.0) much faster because of a rewrite
More info:
It's good practice to use a context manager or call close()
in case of exceptions during the file saving process. Could happen if your storage backend is down, etc.
Any overwrite behavior should be configured in your storage backend. For example S3Boto3Storage has a setting AWS_S3_FILE_OVERWRITE
. If you're using FileSystemStorage
you can write a custom mixin.
You might also want to call the model's save method instead of the FileField's save method if you want any custom side-effects to happen, like last-updated timestamps. If that's the case, you can also set the name attribute of the file to the name of the file - which is relative to MEDIA_ROOT
. It defaults to the full path of the file which can cause problems if you don't set it - see File.__init__() and File.name.
Here's an example where self
is the model instance where my_file
is the FileField / ImageFile, calling save()
on the whole model instance instead of just FileField:
import os
from django.core.files import File
with open(filepath, 'rb') as fi:
self.my_file = File(fi, name=os.path.basename(fi.name))
self.save()
I have had to use code like this to provide functions to allocate memory to a pointer passed in and return its size because my company "object" to me using the STL
int iSizeOfArray(int* &piArray) {
piArray = new int[iNumberOfElements];
...
return iNumberOfElements;
}
It is not nice, but the pointer must be passed by reference (or use double pointer). If not, memory is allocated to a local copy of the pointer if it is passed by value which results in a memory leak.
Yes, you need to use global foo
if you are going to write to it.
foo = []
def bar():
global foo
...
foo = [1]
git status
does not always show the difference between master and origin/master even after a fetch.
If you want the combination git fetch origin && git status
to work, you need to specify the tracking information between the local branch and origin:
# git branch --set-upstream-to=origin/<branch> <branch>
For the master branch:
git branch --set-upstream-to=origin/master master
You may use Firefox Markdown Viewer plugin that is so easy to install and use.
You can also use template reference variables
<form (submit)="onSubmit(player.value)">
<input #player placeholder="player name">
</form>
onSubmit(playerName: string) {
console.log(playerName)
}
Following worked for me.
SELECT *
FROM table_log
WHERE DATE(start_time) <= '2017-01-09' AND DATE(start_time) >= '2016-12-21'
You can import svg and it use it like a image
import chatSVG from '../assets/images/undraw_typing_jie3.svg'
And ise it in img tag
<img src={chatSVG} className='iconChat' alt="Icon chat"/>
I've been looking for a solution that i can use on bootstrap 4 navbars and other groups of links.
For one reason or another most solutions didn't work especially the ones that try to add 'active' to links onclick because of course once the link is clicked if it takes you to another page then the 'active' you added won't be there because the DOM has changed. Many of the other solutions didn't work either because they often did not match the link or they matched more than one.
This elegant solution is fine for links that are different ie: about.php, index.php, etc...
$(function() {
$('nav a[href^="' + location.pathname.split("/")[2] + '"]').addClass('active');
});
However when it came to the same links with different query strings such as index.php?tag=a, index.php?tag=b, index.php?tag=c it would set all of them to active whichever was clicked as it's matching the pathname not the query as well.
So i tried this code which matched the pathname and the query string and it worked on all the links with query strings but when a link like index.php was clicked it would set the similar query string links active as well. This is because my function is returning an empty string if there is no query string in the link, again just matching the pathname.
$(function() {
$('nav a[href^="' + location.pathname.split("/")[2] + returnQueryString(location.href.split("?")[1]) + '"]').addClass('active');
});
/** returns a query string if there, else an empty string */
function returnQueryString (element) {
if (element === undefined)
return "";
else
return '?' + element;
}
So in the end i abandoned this route and kept it simple and wrote this.
$('.navbar a').each(function(index, element) {
//console.log(index+'-'+element.href);
//console.log(location.href);
/** look at each href in the navbar
* if it matches the location.href then set active*/
if (element.href === location.href){
//console.log("---------MATCH ON "+index+" --------");
$(element).addClass('active');
}
});
It works on all links with or without query strings because element.href and location.href both return the full path. For other menus etc you can simply change the parent class selector (navbar) for another ie:
$('.footer a').each(function(index, element)...
One last thing which also seems important and that is the js & css library's you are using however that's another post perhaps. I hope this helps and contributes.
I bet this is what was intended as a result.
$ date -u --date=@1404372514
Thu Jul 3 07:28:34 UTC 2014
RegexBuddy is telling me if you want to include it at the beginning, this is the correct syntax:
"(?i)\\b(\\w+)\\b(\\s+\\1)+\\b"
In addition to all the concerns expressed about why you give a rat's ass what the ID value is (all are correct that you shouldn't), let me add this to the mix:
If you've deleted all the records from the table, compacting the database will reset the seed value back to its original value.
For a table where there are still records, and you've inserted a value into the Autonumber field that is lower than the highest value, you have to use @Remou's method to reset the seed value. This also applies if you want to reset to the Max+1 in a table where records have been deleted, e.g., 300 records, last ID of 300, delete 201-300, compact won't reset the counter (you have to use @Remou's method -- this was not the case in earlier versions of Jet, and, indeed, in early versions of Jet 4, the first Jet version that allowed manipulating the seed value programatically).
You could use an import and single line code like this:
import ctypes # An included library with Python install.
ctypes.windll.user32.MessageBoxW(0, "Your text", "Your title", 1)
Or define a function (Mbox) like so:
import ctypes # An included library with Python install.
def Mbox(title, text, style):
return ctypes.windll.user32.MessageBoxW(0, text, title, style)
Mbox('Your title', 'Your text', 1)
Note the styles are as follows:
## Styles:
## 0 : OK
## 1 : OK | Cancel
## 2 : Abort | Retry | Ignore
## 3 : Yes | No | Cancel
## 4 : Yes | No
## 5 : Retry | Cancel
## 6 : Cancel | Try Again | Continue
Have fun!
Note: edited to use MessageBoxW
instead of MessageBoxA
There so many of the useful explanations, but I didnt found just a short description, so..
Basically pointer is address of the variable. Short summary code:
int a, *p_a;//declaration of normal variable and int pointer variable
a = 56; //simply assign value
p_a = &a; //save address of "a" to pointer variable
*p_a = 15; //override the value of the variable
//print 0xfoo and 15
//- first is address, 2nd is value stored at this address (that is called dereference)
printf("pointer p_a is having value %d and targeting at variable value %d", p_a, *p_a);
Also useful info can be found in topic What means reference and dereference
And I am not so sure, when can be pointers useful, but in common it is necessary to use them when you are doing some manual/dynamic memory allocation- malloc, calloc, etc.
So I hope it will also helps for clarify the problematic :)
(This is for windows OS but concept can be applied to other OS)
Running command node -v
will be able to confirm if it is installed, however it will not be able to confirm if it is NOT installed. (Executable may not be on your PATH)
Two ways you can check if it is actually installed:
C:\Program Files\nodejs\
or
System Settings -> Add or Remove Programs
and filter by node
, it should show you if you have it installed. For me, it shows as title:"Node.js" and description "Node.js Foundation", with no version specified. Install size is 52.6MBIf you don't have it installed, get it from here https://nodejs.org/en/download/
Avoid nullable unique constraints. You can always put the column in a new table, make it non-null and unique and then populate that table only when you have a value for it. This ensures that any key dependency on the column can be correctly enforced and avoids any problems that could be caused by nulls.
<table style="border: 5px solid black">
This only adds a border around the table.
If you want same border through CSS then add this rule:
table tr td { border: 5px solid black; }
and one thing for HTML table to avoid spaces
<table cellspacing="0" cellpadding="0">
Maybe you can try this: though please note - This pulls the column count, not the row count
using (SqlDataReader reader = command.ExecuteReader())
{
while (reader.Read())
{
int count = reader.VisibleFieldCount;
Console.WriteLine(count);
}
}
To make @NotNull
active you need Lombok:
https://projectlombok.org/features/NonNull
import lombok.NonNull;
I dont have a direct answer, but you might want to look into these things:
job
is done, insert a new job describing the work that needs to be done in order to process the cached HTTP response body.This ought to be more effective:
pip3 list -o | grep -v -i warning | cut -f1 -d' ' | tr " " "\n" | awk '{if(NR>=3)print}' | cut -d' ' -f1 | xargs -n1 pip3 install -U
pip list -o
lists outdated packages;grep -v -i warning
inverted match on warning
to avoid errors when updatingcut -f1 -d1' '
returns the first word - the name of the outdated package;tr "\n|\r" " "
converts the multiline result from cut
into a single-line, space-separated list;awk '{if(NR>=3)print}'
skips header linescut -d' ' -f1
fetches the first columnxargs -n1 pip install -U
takes 1 argument from the pipe left of it, and passes it to the command to upgrade the list of packages.Not with pure HTML as far as I know.
But with JS or PHP or another scripting language such as JSP, you can do it very easily with a for loop.
Example in PHP:
<select>
<?php
for ($i=1; $i<=100; $i++)
{
?>
<option value="<?php echo $i;?>"><?php echo $i;?></option>
<?php
}
?>
</select>
As an aside on more modern websites, if you are using conditional statements on your html tag as per boilerplate, this will for some reason cause ie9 to default to compatibility mode. The fix here is to move your conditional statements off the html tag and add them to the body tag, in other words out of the head section. That way you can still use those classes in your style sheet to target older browsers.
On page 358 of the book Python scripting for computational science by Hans Petter Langtangen, it clearly states that
__repr__
aims at a complete string representation of the object;__str__
is to return a nice string for printing.So, I prefer to understand them as
from the user's point of view although this is a misunderstanding I made when learning python.
A small but good example is also given on the same page as follows:
In [38]: str('s')
Out[38]: 's'
In [39]: repr('s')
Out[39]: "'s'"
In [40]: eval(str('s'))
Traceback (most recent call last):
File "<ipython-input-40-abd46c0c43e7>", line 1, in <module>
eval(str('s'))
File "<string>", line 1, in <module>
NameError: name 's' is not defined
In [41]: eval(repr('s'))
Out[41]: 's'
I think there are 2 things that add confusion to this topic:
I've created 5 functions that compute auto-correlation of a 1d array, with partial v.s. non-partial distinctions. Some use formula from statistics, some use correlate in the signal processing sense, which can also be done via FFT. But all results are auto-correlations in the statistics definition, so they illustrate how they are linked to each other. Code below:
import numpy
import matplotlib.pyplot as plt
def autocorr1(x,lags):
'''numpy.corrcoef, partial'''
corr=[1. if l==0 else numpy.corrcoef(x[l:],x[:-l])[0][1] for l in lags]
return numpy.array(corr)
def autocorr2(x,lags):
'''manualy compute, non partial'''
mean=numpy.mean(x)
var=numpy.var(x)
xp=x-mean
corr=[1. if l==0 else numpy.sum(xp[l:]*xp[:-l])/len(x)/var for l in lags]
return numpy.array(corr)
def autocorr3(x,lags):
'''fft, pad 0s, non partial'''
n=len(x)
# pad 0s to 2n-1
ext_size=2*n-1
# nearest power of 2
fsize=2**numpy.ceil(numpy.log2(ext_size)).astype('int')
xp=x-numpy.mean(x)
var=numpy.var(x)
# do fft and ifft
cf=numpy.fft.fft(xp,fsize)
sf=cf.conjugate()*cf
corr=numpy.fft.ifft(sf).real
corr=corr/var/n
return corr[:len(lags)]
def autocorr4(x,lags):
'''fft, don't pad 0s, non partial'''
mean=x.mean()
var=numpy.var(x)
xp=x-mean
cf=numpy.fft.fft(xp)
sf=cf.conjugate()*cf
corr=numpy.fft.ifft(sf).real/var/len(x)
return corr[:len(lags)]
def autocorr5(x,lags):
'''numpy.correlate, non partial'''
mean=x.mean()
var=numpy.var(x)
xp=x-mean
corr=numpy.correlate(xp,xp,'full')[len(x)-1:]/var/len(x)
return corr[:len(lags)]
if __name__=='__main__':
y=[28,28,26,19,16,24,26,24,24,29,29,27,31,26,38,23,13,14,28,19,19,\
17,22,2,4,5,7,8,14,14,23]
y=numpy.array(y).astype('float')
lags=range(15)
fig,ax=plt.subplots()
for funcii, labelii in zip([autocorr1, autocorr2, autocorr3, autocorr4,
autocorr5], ['np.corrcoef, partial', 'manual, non-partial',
'fft, pad 0s, non-partial', 'fft, no padding, non-partial',
'np.correlate, non-partial']):
cii=funcii(y,lags)
print(labelii)
print(cii)
ax.plot(lags,cii,label=labelii)
ax.set_xlabel('lag')
ax.set_ylabel('correlation coefficient')
ax.legend()
plt.show()
Here is the output figure:
We don't see all 5 lines because 3 of them overlap (at the purple). The overlaps are all non-partial auto-correlations. This is because computations from the signal processing methods (np.correlate
, FFT) don't compute a different mean/std for each overlap.
Also note that the fft, no padding, non-partial
(red line) result is different, because it didn't pad the timeseries with 0s before doing FFT, so it's circular FFT. I can't explain in detail why, that's what I learned from elsewhere.
v-flex does not have a display flex! Inspect v-flex in your browser and you will find out it is just a simple block div.
So, you should override it with display: flex
in your HTML or CSS to make it work with justify-content.
Using CocoaPods with a Gemfile
With a Gemfile setup, you run bundle install
to install, or bundle update
to update within your Gemfile's constraints. From here on in however, you will need to remember to run bundle exec
before any terminal commands that have come in via bundler. Given that CocoaPods is included in the above this means any time you would write pod XX YY
you need to do bundle exec pod XX YY
.
Doing it without bundle exec
will bypass your Gemfile's specific versioning and will use the latest version of the library within RubyGems. This could potentially be the exact same version, but it can often not. If you are including CocoaPods plugins then they may also not be run.
This means you can be sure that foundational tooling for projects are versioned just like your personal libraries.
One more difference, which I've encountered in other languages for Constants is : can't initialise the constant(let) for later , should initialise as you're about to declare the constant.
For instance :
let constantValue : Int // Compile error - let declarations require an initialiser expression
Variable
var variableValue : Int // No issues
In a hacky way it can be done for channels which one attempts to write to by recovering the raised panic. But you cannot check if a read channel is closed without reading from it.
Either you will
v <- c
)v, ok <- c
)v, ok <- c
)v <- c
)Only the last one technically doesn't read from the channel, but that's of little use.
Here's a three-step, somewhat minimalist version of ThorSummoner's answer for the sake of clarity. It doesn't quite do what I want (I'll explain at the bottom), but it works okay.
setup.py
filepath_to/project_name/
setup.py
In setup.py
, write:
import setuptools
setuptools.setup(name='project_name')
Run this code in console:
python -m pip install --editable filepath_to/project_name
Instead of python
, you may need to use python3
or something, depending on how your python is installed. Also, you can use -e
instead of --editable
.
Now, your directory will look more or less like this. I don't know what the egg stuff is.
filepath_to/project_name/
setup.py
test_3.egg-info/
dependency_links.txt
PKG-INFO
SOURCES.txt
top_level.txt
This folder is considered a python package and you can import from files in this parent directory even if you're writing a script anywhere else on your computer.
Let's say you make two files, one in your project's main directory and another in a sub directory. It'll look like this:
filepath_to/project_name/
top_level_file.py
subdirectory/
subfile.py
setup.py |
test_3.egg-info/ |----- Ignore these guys
... |
Now, if top_level_file.py
looks like this:
x = 1
Then I can import it from subfile.py
, or really any other file anywhere else on your computer.
# subfile.py OR some_other_python_file_somewhere_else.py
import random # This is a standard package that can be imported anywhere.
import top_level_file # Now, top_level_file.py works similarly.
print(top_level_file.x)
This is different than what I was looking for: I hoped python had a one-line way to import from a file above. Instead, I have to treat the script like a module, do a bunch of boilerplate, and install it globally for the entire python installation to have access to it. It's overkill. If anyone has a simpler method than doesn't involve the above process or importlib
shenanigans, please let me know.
You need to add query.addEntity(SwitcherServiceSource.class) before calling the .list() on query.
With Swift 5, you can use String
's init(data:encoding:)
initializer in order to convert a Data
instance into a String
instance using UTF-8. init(data:encoding:)
has the following declaration:
init?(data: Data, encoding: String.Encoding)
Returns a
String
initialized by converting given data into Unicode characters using a given encoding.
The following Playground code shows how to use it:
import Foundation
let json = """
{
"firstName" : "John",
"lastName" : "Doe"
}
"""
let data = json.data(using: String.Encoding.utf8)!
let optionalString = String(data: data, encoding: String.Encoding.utf8)
print(String(describing: optionalString))
/*
prints:
Optional("{\n\"firstName\" : \"John\",\n\"lastName\" : \"Doe\"\n}")
*/
string now = Convert.ToString(DateTime.Now.ToShortDateString());
Console.WriteLine(now);
Console.ReadLine();
After setting the gems directory to the user directory that runs the gem install
, using export GEM_HOME=/home/<user>/gems
, the issue has been solved.
For me, I have to Revoke USB debugging authorizations
in Developer Options. Here is the steps:
USB Debugging
,USB Debugging
I found this worked in my scenario.
The jqXHR.success(), jqXHR.error(), and jqXHR.complete() callback methods introduced in jQuery 1.5 are deprecated as of jQuery 1.8. To prepare your code for their eventual removal, use jqXHR.done(), jqXHR.fail(), and jqXHR.always() instead.
$.get("urlToCheck.com").done(function () {
alert("success");
}).fail(function () {
alert("failed.");
});
The Java Language Specification(1) describes how try-catch-finally
is executed.
Having no catch is equivalent to not having a catch able to catch the given Throwable.
- If execution of the try block completes abruptly because of a throw of a value V, then there is a choice:
- If the run-time type of V is assignable to the parameter of any catch clause of the try statement, then …
…- If the run-time type of V is not assignable to the parameter of any catch clause of the try statement, then the finally block is executed. Then there is a choice:
- If the finally block completes normally, then the try statement completes abruptly because of a throw of the value V.
- If the finally block completes abruptly for reason S, then the try statement completes abruptly for reason S (and the throw of value V is discarded and forgotten).
Here what you can try:
var d = Date.parse("2016-07-19T20:23:01.804Z");
alert(d); //this is in milliseconds
I like using _.pickBy, because you have full control over what you are removing:
var person = {"name":"bill","age":21,"sex":undefined,"height":null};
var cleanPerson = _.pickBy(person, function(value, key) {
return !(value === undefined || value === null);
});
Source: https://www.codegrepper.com/?search_term=lodash+remove+undefined+values+from+object
This post has a reasonable answer:
CMakeLists.txt.in
:
cmake_minimum_required(VERSION 2.8.2)
project(googletest-download NONE)
include(ExternalProject)
ExternalProject_Add(googletest
GIT_REPOSITORY https://github.com/google/googletest.git
GIT_TAG master
SOURCE_DIR "${CMAKE_BINARY_DIR}/googletest-src"
BINARY_DIR "${CMAKE_BINARY_DIR}/googletest-build"
CONFIGURE_COMMAND ""
BUILD_COMMAND ""
INSTALL_COMMAND ""
TEST_COMMAND ""
)
CMakeLists.txt
:
# Download and unpack googletest at configure time
configure_file(CMakeLists.txt.in
googletest-download/CMakeLists.txt)
execute_process(COMMAND ${CMAKE_COMMAND} -G "${CMAKE_GENERATOR}" .
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/googletest-download )
execute_process(COMMAND ${CMAKE_COMMAND} --build .
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/googletest-download )
# Prevent GoogleTest from overriding our compiler/linker options
# when building with Visual Studio
set(gtest_force_shared_crt ON CACHE BOOL "" FORCE)
# Add googletest directly to our build. This adds
# the following targets: gtest, gtest_main, gmock
# and gmock_main
add_subdirectory(${CMAKE_BINARY_DIR}/googletest-src
${CMAKE_BINARY_DIR}/googletest-build)
# The gtest/gmock targets carry header search path
# dependencies automatically when using CMake 2.8.11 or
# later. Otherwise we have to add them here ourselves.
if (CMAKE_VERSION VERSION_LESS 2.8.11)
include_directories("${gtest_SOURCE_DIR}/include"
"${gmock_SOURCE_DIR}/include")
endif()
# Now simply link your own targets against gtest, gmock,
# etc. as appropriate
However it does seem quite hacky. I'd like to propose an alternative solution - use Git submodules.
cd MyProject/dependencies/gtest
git submodule add https://github.com/google/googletest.git
cd googletest
git checkout release-1.8.0
cd ../../..
git add *
git commit -m "Add googletest"
Then in MyProject/dependencies/gtest/CMakeList.txt
you can do something like:
cmake_minimum_required(VERSION 3.3)
if(TARGET gtest) # To avoid diamond dependencies; may not be necessary depending on you project.
return()
endif()
add_subdirectory("googletest")
I haven't tried this extensively yet but it seems cleaner.
Edit: There is a downside to this approach: The subdirectory might run install()
commands that you don't want. This post has an approach to disable them but it was buggy and didn't work for me.
Edit 2: If you use add_subdirectory("googletest" EXCLUDE_FROM_ALL)
it seems means the install()
commands in the subdirectory aren't used by default.
Probably you missing @SpringBootApplication
in your spring boot starter class.
@SpringBootApplication
public class LoginSecurityAppApplication {
public static void main(String[] args) {
SpringApplication.run(LoginSecurityAppApplication.class, args);
}
}
If you are talking about an RCP app, then what you need is the SWT link
widget.
Here is the official link event handler snippet.
Update
Here is minimalist android application to connect to either superuser or stackoverflow with 2 buttons.
package ap.android;
import android.app.Activity;
import android.content.Intent;
import android.net.Uri;
import android.os.Bundle;
import android.view.View;
public class LinkButtons extends Activity {
@Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.main);
}
public void goToSo (View view) {
goToUrl ( "http://stackoverflow.com/");
}
public void goToSu (View view) {
goToUrl ( "http://superuser.com/");
}
private void goToUrl (String url) {
Uri uriUrl = Uri.parse(url);
Intent launchBrowser = new Intent(Intent.ACTION_VIEW, uriUrl);
startActivity(launchBrowser);
}
}
And here is the layout.
<?xml version="1.0" encoding="utf-8"?>
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="vertical" android:layout_width="fill_parent" android:layout_height="fill_parent">
<TextView android:layout_width="fill_parent" android:layout_height="wrap_content" android:text="@string/select" />
<Button android:layout_height="wrap_content" android:clickable="true" android:autoLink="web" android:cursorVisible="true" android:layout_width="match_parent" android:id="@+id/button_so" android:text="StackOverflow" android:linksClickable="true" android:onClick="goToSo"></Button>
<Button android:layout_height="wrap_content" android:layout_width="match_parent" android:text="SuperUser" android:autoLink="web" android:clickable="true" android:id="@+id/button_su" android:onClick="goToSu"></Button>
</LinearLayout>
module = __import__("my_package/my_module")
the_class = getattr(module, "MyClass")
obj = the_class()
First you should use print_r($_FILES)
to debug, and see what it contains. :
your uploads.php
would look like:
//This is the directory where images will be saved
$target = "pics/";
$target = $target . basename( $_FILES['Filename']['name']);
//This gets all the other information from the form
$Filename=basename( $_FILES['Filename']['name']);
$Description=$_POST['Description'];
//Writes the Filename to the server
if(move_uploaded_file($_FILES['Filename']['tmp_name'], $target)) {
//Tells you if its all ok
echo "The file ". basename( $_FILES['Filename']['name']). " has been uploaded, and your information has been added to the directory";
// Connects to your Database
mysql_connect("localhost", "root", "") or die(mysql_error()) ;
mysql_select_db("altabotanikk") or die(mysql_error()) ;
//Writes the information to the database
mysql_query("INSERT INTO picture (Filename,Description)
VALUES ('$Filename', '$Description')") ;
} else {
//Gives and error if its not
echo "Sorry, there was a problem uploading your file.";
}
?>
EDIT: Since this is old post, currently it is strongly recommended to use either mysqli or pdo instead mysql_ functions in php
Solved myself. Done some small structural changes also. Route from Component1 to Component2 is done by a single <router-outlet>
. Component2 to Comonent3 and Component4 is done by multiple <router-outlet name= "xxxxx">
The resulting contents are :
Component1.html
<nav>
<a routerLink="/two" class="dash-item">Go to 2</a>
</nav>
<router-outlet></router-outlet>
Component2.html
<a [routerLink]="['/two', {outlets: {'nameThree': ['three']}}]">In Two...Go to 3 ... </a>
<a [routerLink]="['/two', {outlets: {'nameFour': ['four']}}]"> In Two...Go to 4 ...</a>
<router-outlet name="nameThree"></router-outlet>
<router-outlet name="nameFour"></router-outlet>
The '/two'
represents the parent component and ['three']
and ['four']
represents the link to the respective children of component2
. Component3.html and Component4.html are the same as in the question.
router.module.ts
const routes: Routes = [
{
path: '',
redirectTo: 'one',
pathMatch: 'full'
},
{
path: 'two',
component: ClassTwo, children: [
{
path: 'three',
component: ClassThree,
outlet: 'nameThree'
},
{
path: 'four',
component: ClassFour,
outlet: 'nameFour'
}
]
},];
The uninstall
option didn't work for me when I tried to use the same command to the one I used in installing (as I was installing with the @latest
directive)
So for example, I installed a package like this:
npm install @ngtools/webpack@latest
And then I wanted to uninstall it, so I used the same command (including @latest):
npm uninstall @ngtools/webpack@latest
So the above uninstall didn't work. I have to remove the @latest
, and then it worked well:
npm uninstall @ngtools/webpack
There is no subquery needed with this statement, which is better written as
select u.*
from Users u, CompanyRolesToUsers c
where u.Id = c.UserId --join just specified here, perfectly fine
and u.lastname like '%fra%'
and c.CompanyRoleId in (2,3,4)
or
select u.*
from Users u inner join CompanyRolesToUsers c
on u.Id = c.UserId --explicit "join" statement, no diff from above, just preference
where u.lastname like '%fra%'
and c.CompanyRoleId in (2,3,4)
That being said, in LINQ it would be
from u in Users
from c in CompanyRolesToUsers
where u.Id == c.UserId &&
u.LastName.Contains("fra") &&
selectedRoles.Contains(c.CompanyRoleId)
select u
or
from u in Users
join c in CompanyRolesToUsers
on u.Id equals c.UserId
where u.LastName.Contains("fra") &&
selectedRoles.Contains(c.CompanyRoleId)
select u
Which again, are both respectable ways to represent this. I prefer the explicit "join" syntax in both cases myself, but there it is...
If t
is a matrix, you need to use the element-wise multiplication or exponentiation. Note the dot.
x = exp( -t.^2 )
or
x = exp( -t.*t )
I got the error Just after switching from .NET Framework to .NET Core. I have 2 class library projects in my Visual Studio solution. I realized that 1 of the projects has a file named AssemblyInfo.cs
while the other project does not have the file. The file is located under the Properties
folder. I simply delete the Properties folder and all works fine.
I was running into the same issue and wanted to avoid adding the intent filter as you described. After some digging, I found an xml attribute android:exported that you should add to the activity you would like to be called.
It is by default set to false if no intent filter added to your activity, but if you do have an intent filter it gets set to true.
here is the documentation http://developer.android.com/guide/topics/manifest/activity-element.html#exported
tl;dr: addandroid:exported="true"
to your activity in your AndroidManifest.xml file and avoid adding the intent-filter :)
As a complement to @JoshuaUlrich answer, here is the definition of function as.Date.character
:
as.Date.character
function (x, format = "", ...)
{
charToDate <- function(x) {
xx <- x[1L]
if (is.na(xx)) {
j <- 1L
while (is.na(xx) && (j <- j + 1L) <= length(x)) xx <- x[j]
if (is.na(xx))
f <- "%Y-%m-%d"
}
if (is.na(xx) || !is.na(strptime(xx, f <- "%Y-%m-%d",
tz = "GMT")) || !is.na(strptime(xx, f <- "%Y/%m/%d",
tz = "GMT")))
return(strptime(x, f))
stop("character string is not in a standard unambiguous format")
}
res <- if (missing(format))
charToDate(x)
else strptime(x, format, tz = "GMT")
as.Date(res)
}
<bytecode: 0x265b0ec>
<environment: namespace:base>
So basically if both strptime(x, format="%Y-%m-%d")
and strptime(x, format="%Y/%m/%d")
throws an NA
it is considered ambiguous and if not unambiguous.
Not in Linux at the moment, so can't double check, but I think it's:
rpm -ql ffmpeg
That should list all the files installed as part of the ffmpeg package.
Hope, this help:
Number.prototype.zeroFill= function (n) {
var isNegative = this < 0;
var number = isNegative ? -1 * this : this;
for (var i = number.toString().length; i < n; i++) {
number = '0' + number;
}
return (isNegative ? '-' : '') + number;
}
Using System.currentTimeMillis() is the proper way of doing this. But, if you use command line, and you want to time the whole program approximately and quickly, think about:
time java App
which allows you not to modify the code and time your App.
var end_date = moment(start_date).clone().add(5, 'days');
Since all these tools lack a validation function their outcomes are just drawings and no better tool for creating nice drawings is a piece of paper and pen. Afterwards you can scan your diagrams and insert them into your team's wiki.
One good principle of data structure design is to ensure that every attribute of a table or object be subject to a well-understood constraint. This is important because if you or your program can count on valid data in the database, you are less likely to have program defects caused by bad data. You also spend less time writing code to handle error conditions, and you are more likely to write error-handling code up front.
In many cases these constraints can be defined at compile-time, in which case you can write a filter to ensure that the attribute always falls within range, or the attempt to save the attribute fails.
However, in many cases these constraints can change at run-time. For example, you may have a "cars" table that has "colour" as an attribute which initially takes on the values, say, of "red", "green" and "blue". It is possible during the execution of the program to add valid colours to that initial list, and new "cars" added may take on any colour in the up-to-date list of colours. Furthermore, you usually want this updated list of colours to survive a program restart.
To answer your question, it turns out that if you have a requirement for data constraint that can change at run-time, and those changes must survive a program restart, foreign keys are the simplest and most concise solution to the problem. The development cost is the addition of one table (e.g. "colours", a foreign key constraint to the "cars" table, and an index), and the run-time cost is the extra table lookup for the up-to-date colours to validate the data, and this run-time cost is usually mitigated by indexing and caching.
If you don't use foreign keys for these requirements, you must write software to manage the list, look valid entries, save it to disk, structure the data efficiently if the list is large, ensure that any updates to the list don't corrupt the list file, provide serial access to the list in case there are multiple readers and/or writers, and so on. i.e. You need to implement a lot of RDBMS functionality.
"ASCII is a subset of UTF-8, so..." - so UTF-8 is a set? :)
In other words: any string build with code points
from x00 to x7F has indistinguishable representations (byte sequences) in ASCII and UTF-8. Converting such string is pointless.
For anyone who comes across this issue in the future, I had to add
perspective: 1px;
to the element that I was applying the border radius to. Final working code:
.ele-with-border-radius {
border-radius: 15px;
overflow: hidden;
perspective: 1px;
}
In my case, I was transport class component from parent and use it inside as a prop var, using typescript and Formik, and run well like this:
Parent 1
import Parent2 from './../components/Parent2/parent2'
import Parent3 from './../components/Parent3/parent3'
export default class Parent1 extends React.Component {
render(){
<React.Fragment>
<Parent2 componentToFormik={Parent3} />
</React.Fragment>
}
}
Parent 2
export default class Parent2 extends React.Component{
render(){
const { componentToFormik } = this.props
return(
<Formik
render={(formikProps) => {
return(
<React.fragment>
{(new componentToFormik(formikProps)).render()}
</React.fragment>
)
}}
/>
)
}
}
With Guava you can use Lists.newArrayList(Iterable) or Sets.newHashSet(Iterable), among other similar methods. This will of course copy all the elements in to memory. If that isn't acceptable, I think your code that works with these ought to take Iterable
rather than Collection
. Guava also happens to provide convenient methods for doing things you can do on a Collection
using an Iterable
(such as Iterables.isEmpty(Iterable)
or Iterables.contains(Iterable, Object)
), but the performance implications are more obvious.
This is an interesting question and touches on a very basic concept in Bourne shell and subshell. Here I provide a solution that is different from the previous solutions by doing some kind of filtering. I will give an example that may be useful in real life. This is a fragment for checking that downloaded files conform to a known checksum. The checksum file look like the following (Showing just 3 lines):
49174 36326 dna_align_feature.txt.gz
54757 1 dna.txt.gz
55409 9971 exon_transcript.txt.gz
The shell script:
#!/bin/sh
.....
failcnt=0 # this variable is only valid in the parent shell
#variable xx captures all the outputs from the while loop
xx=$(cat ${checkfile} | while read -r line; do
num1=$(echo $line | awk '{print $1}')
num2=$(echo $line | awk '{print $2}')
fname=$(echo $line | awk '{print $3}')
if [ -f "$fname" ]; then
res=$(sum $fname)
filegood=$(sum $fname | awk -v na=$num1 -v nb=$num2 -v fn=$fname '{ if (na == $1 && nb == $2) { print "TRUE"; } else { print "FALSE"; }}')
if [ "$filegood" = "FALSE" ]; then
failcnt=$(expr $failcnt + 1) # only in subshell
echo "$fname BAD $failcnt"
fi
fi
done | tail -1) # I am only interested in the final result
# you can capture a whole bunch of texts and do further filtering
failcnt=${xx#* BAD } # I am only interested in the number
# this variable is in the parent shell
echo failcnt $failcnt
if [ $failcnt -gt 0 ]; then
echo $failcnt files failed
else
echo download successful
fi
The parent and subshell communicate through the echo command. You can pick some easy to parse text for the parent shell. This method does not break your normal way of thinking, just that you have to do some post processing. You can use grep, sed, awk, and more for doing so.
Simply use the .rules('add')
method immediately after creating the element...
var filenumber = 1;
$("#AddFile").click(function () { //User clicks button #AddFile
// create the new input element
$('<li><input type="file" name="FileUpload' + filenumber + '" id="FileUpload' + filenumber + '" /> <a href="#" class="RemoveFileUpload">Remove</a></li>').prependTo("#FileUploader");
// declare the rule on this newly created input field
$('#FileUpload' + filenumber).rules('add', {
required: true, // <- with this you would not need 'required' attribute on input
accept: "image/jpeg, image/pjpeg"
});
filenumber++; // increment counter for next time
return false;
});
You'll still need to use .validate()
to initialize the plugin within a DOM ready handler.
You'll still need to declare rules for your static elements using .validate()
. Whatever input elements that are part of the form when the page loads... declare their rules within .validate()
.
You don't need to use .each()
, when you're only targeting ONE element with the jQuery selector attached to .rules()
.
You don't need the required
attribute on your input element when you're declaring the required
rule using .validate()
or .rules('add')
. For whatever reason, if you still want the HTML5 attribute, at least use a proper format like required="required"
.
Working DEMO: http://jsfiddle.net/8dAU8/5/
In my case I refactored a member variable that was named "activity", I renamed it to "context"... I found out that the refactor was made to the activity tags in manifest, and I found them context tags instead... this is really stupid from Android Studio!
Another Alternative for those who are probing around and/or in interactive mode:
$Error[0].Exception.LoaderExceptions
Note: [0] grabs the most recent Error from the stack
The Q library by kriskowal includes callback-to-promise functions. A method like this:
obj.prototype.dosomething(params, cb) {
...blah blah...
cb(error, results);
}
can be converted with Q.ninvoke
Q.ninvoke(obj,"dosomething",params).
then(function(results) {
});
I stumbled over this as chocolatey sets M2_HOME
. I wanted to locate settings.xml
.
The current way for settings.xml
is to go to %USERPROFILE%
. There, a directory .m2
is contained, where one finds settings.xml
.
Never use M2_HOME
. It is unsupported since Apache Maven 3.5.0.
Details:
Based on problems in using
M2_HOME
related to different Maven versions installed and to simplify things, the usage ofM2_HOME
has been removed and is not supported any more MNG-5823, MNG-5836, MNG-5607.Important change for windows users: The usage of
%HOME%
has been replaced with%USERPROFILE%
MNG-6001
Source: https://maven.apache.org/docs/3.5.0/release-notes.html#overview-about-the-changes
I used the following code, it's working!
using System.Data.OleDb;
using System.IO;
using System.Text.RegularExpressions;
private void btopen_Click(object sender, EventArgs e)
{
try
{
OpenFileDialog openFileDialog1 = new OpenFileDialog(); //create openfileDialog Object
openFileDialog1.Filter = "XML Files (*.xml; *.xls; *.xlsx; *.xlsm; *.xlsb) |*.xml; *.xls; *.xlsx; *.xlsm; *.xlsb";//open file format define Excel Files(.xls)|*.xls| Excel Files(.xlsx)|*.xlsx|
openFileDialog1.FilterIndex = 3;
openFileDialog1.Multiselect = false; //not allow multiline selection at the file selection level
openFileDialog1.Title = "Open Text File-R13"; //define the name of openfileDialog
openFileDialog1.InitialDirectory = @"Desktop"; //define the initial directory
if (openFileDialog1.ShowDialog() == DialogResult.OK) //executing when file open
{
string pathName = openFileDialog1.FileName;
fileName = System.IO.Path.GetFileNameWithoutExtension(openFileDialog1.FileName);
DataTable tbContainer = new DataTable();
string strConn = string.Empty;
string sheetName = fileName;
FileInfo file = new FileInfo(pathName);
if (!file.Exists) { throw new Exception("Error, file doesn't exists!"); }
string extension = file.Extension;
switch (extension)
{
case ".xls":
strConn = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + pathName + ";Extended Properties='Excel 8.0;HDR=Yes;IMEX=1;'";
break;
case ".xlsx":
strConn = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + pathName + ";Extended Properties='Excel 12.0;HDR=Yes;IMEX=1;'";
break;
default:
strConn = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + pathName + ";Extended Properties='Excel 8.0;HDR=Yes;IMEX=1;'";
break;
}
OleDbConnection cnnxls = new OleDbConnection(strConn);
OleDbDataAdapter oda = new OleDbDataAdapter(string.Format("select * from [{0}$]", sheetName), cnnxls);
oda.Fill(tbContainer);
dtGrid.DataSource = tbContainer;
}
}
catch (Exception)
{
MessageBox.Show("Error!");
}
}
Try :
List<string> MyList = new List<string>();
MyList.Add("HELLO");
MyList.Add("WORLD");
listBox1.DataSource = MyList;
Have a look at ListControl.DataSource Property
To get the last record details, use the code below:
Model::where('field', 'value')->get()->last()
I know this is old but just wanted to mention that I tried this with PHP 7.2:
<?php
//Creating array with 1 000 000 elements
$a = array();
for ($i = 0; $i < 1000000; ++$i)
{
$a[] = 100;
}
//Measure
$time = time();
for ($i = 0; $i < 1000000000; ++$i)
{
$b = count($a);
}
print("1 000 000 000 iteration of count() took ".(time()-$time)." sec\n");
$time = time();
for ($i = 0; $i < 1000000000; ++$i)
{
$b = sizeof($a);
}
print("1 000 000 000 iteration of sizeof() took ".(time()-$time)." sec\n");
?>
and the result was:
1 000 000 000 iteration of count() took 414 sec
1 000 000 000 iteration of sizeof() took 1369 sec
So just use count()
.
zip -r "$destFileName.zip" "$srcFileName" -x "*/\__MACOSX" -x "*/\.*"
-x "*/\__MACOSX"
: ignore __MACOSX as you mention.-x "*/\.*"
: ignore any hidden file, such as .DS_Store .Also, you can build Automator Service to make it easily to use in Finder. Check link below to see detail if you need.
It bothered me too much while updating node version from 8.1.0 to 10.14.0
Here is what worked for me:
Open terminal (Ctrl+Alt+T).
Type which node
, which will give a path something like /usr/local/bin/node
Run the command sudo rm /usr/local/bin/node
to remove the binary (adjust the path according to what you found in step 2). Now node -v
shows you have no node version
Download a script and run it to set up the environment:
curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash -
Install using sudo apt-get install nodejs
Note: If you are getting error like
node /usr/bin/env: node: No such file or directory
just run
ln -s /usr/bin/nodejs /usr/bin/node
Now node -v
will give v10.14.0
Worked for me.
This runnable example shows how to use scrollIntoView() which is supported in all modern browsers: https://developer.mozilla.org/en-US/docs/Web/API/Element.scrollIntoView#Browser_Compatibility
The example below uses jQuery to select the element with #yourid
.
$( "#yourid" )[0].scrollIntoView();
_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p id="yourid">Hello world.</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>_x000D_
<p>..</p>
_x000D_
The proper interval to get one second is 1000. The Interval
property is the time between ticks in milliseconds:
So, it's not the interval that you set that is wrong. Check the rest of your code for something like changing the interval of the timer, or binding the Tick
event multiple times.
You can make a JavaScript function to do that:
$.clearInput = function () {
$('form').find('input[type=text], input[type=password], input[type=number], input[type=email], textarea').val('');
};
and then you can call that function each time your modal is hidden:
$('#Your_Modal').on('hidden', function () {
$.clearInput();
});
Couldn't you just do something simple like this?
For i = LBound(Schedule, 1) To UBound(Schedule, 1)
If (Schedule(i, 1) < ReferenceDate) Then
PrevCouponIndex = i
Else
DF = Application.Run("SomeFunction"....)
PV = PV + (DF * Coupon / CouponFrequency)
End If
Next
Yes it is possible by overriding the default typeface. I followed this solution and it worked like a charm for all TextViews and ActionBar text too with a single change.
public class MyApp extends Application {
@Override
public void onCreate() {
TypefaceUtil.overrideFont(getApplicationContext(), "SERIF", "fonts/Roboto-Regular.ttf"); // font from assets: "assets/fonts/Roboto-Regular.ttf
}
}
styles.xml
<!-- Base application theme. -->
<style name="AppTheme" parent="Theme.AppCompat.Light.NoActionBar">
<!-- Customize your theme here. -->
<item name="colorPrimary">@color/pantone</item>
<item name="colorPrimaryDark">@color/colorPrimaryDark</item>
<item name="colorAccent">@color/colorAccent</item>
<item name="android:windowTranslucentStatus" tools:targetApi="kitkat">true</item>
<item name="android:windowDisablePreview">true</item>
<item name="android:typeface">serif</item>
</style>
Instead of themes.xml as mentioned in the above link, I mentioned the default font to override in my styles.xml in my default app theme tag. The default typefaces that can be overwritten are serif, sans, monospace and normal.
TypefaceUtil.java
public class TypefaceUtil {
/**
* Using reflection to override default typeface
* NOTICE: DO NOT FORGET TO SET TYPEFACE FOR APP THEME AS DEFAULT TYPEFACE WHICH WILL BE OVERRIDDEN
* @param context to work with assets
* @param defaultFontNameToOverride for example "monospace"
* @param customFontFileNameInAssets file name of the font from assets
*/
public static void overrideFont(Context context, String defaultFontNameToOverride, String customFontFileNameInAssets) {
try {
final Typeface customFontTypeface = Typeface.createFromAsset(context.getAssets(), customFontFileNameInAssets);
final Field defaultFontTypefaceField = Typeface.class.getDeclaredField(defaultFontNameToOverride);
defaultFontTypefaceField.setAccessible(true);
defaultFontTypefaceField.set(null, customFontTypeface);
} catch (Exception e) {
Log.e("Can not set custom font " + customFontFileNameInAssets + " instead of " + defaultFontNameToOverride);
}
}
}
Initially, I didnt know the typefaces to be overwritten are fixed and set of defined values but eventually it helped me understand how Android deals with fonts and typefaces and their default values, which is a different point ofcourse.
finalName is created as:
<build>
<finalName>${project.artifactId}-${project.version}</finalName>
</build>
One of the solutions is to add own property:
<properties>
<finalName>${project.artifactId}-${project.version}</finalName>
</properties>
<build>
<finalName>${finalName}</finalName>
</build>
And now try:
mvn -DfinalName=build clean package
You can use stuff in place of replace for avoiding the bug that Hamlet Hakobyan has mentioned
CREATE FUNCTION dbo.StripWWWandCom (@input VARCHAR(250))
RETURNS VARCHAR(250)
AS BEGIN
DECLARE @Work VARCHAR(250)
SET @Work = @Input
--SET @Work = REPLACE(@Work, 'www.', '')
SET @Work = Stuff(@Work,1,4, '')
SET @Work = REPLACE(@Work, '.com', '')
RETURN @work
END
You can only do this to you own photos. Due to recent upgrades, Facebook has made this more difficult. To do this, go to the album page where the photo is that you want to link to. You should see thumbnail images of the photos in the album. Hold down the "Control" or "Command" key while clicking the photo that you wish to link to. A new browser tab will open with the picture you clicked. Under the picture there is a URL that you can send to others to share the photo. You might have to have the privacy settings for that album set so that anyone can see the photos in that album. If you don't the person who clicks the link may have to be signed in and also be your "friend."
Here is an example of one of my photos: http://www.facebook.com/photo.php?pid=43764341&l=0d8a526a64&id=25502298 -it's my cat.
Update:
The link below the photo no longer appears. Once you open the photo in a new tab you can right click the photo (Control+click for Mac users) and click "Copy Image URL" or similar and then share this link. Based on my tests the person who clicks the link doesn't need to use Facebook. The photo will load without the Facebook interface. Like this - http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/189088_867367406856_25502298_43764341_1304758_n.jpg
I higly recomend http-request built on apache http api.
For your case you can see example:
private static final HttpRequest<String.class> HTTP_REQUEST =
HttpRequestBuilder.createPost("http://example.com/index.php", String.class)
.responseDeserializer(ResponseDeserializer.ignorableDeserializer())
.build();
public void sendRequest(String request){
String parameters = request.split("\\?")[1];
ResponseHandler<String> responseHandler =
HTTP_REQUEST.executeWithQuery(parameters);
System.out.println(responseHandler.getStatusCode());
System.out.println(responseHandler.get()); //prints response body
}
If you are not interested in the response body
private static final HttpRequest<?> HTTP_REQUEST =
HttpRequestBuilder.createPost("http://example.com/index.php").build();
public void sendRequest(String request){
ResponseHandler<String> responseHandler =
HTTP_REQUEST.executeWithQuery(parameters);
}
For general sending post request with http-request: Read the documentation and see my answers HTTP POST request with JSON String in JAVA, Sending HTTP POST Request In Java, HTTP POST using JSON in Java
You can use the nice_hash gem: https://github.com/MarioRuiz/nice_hash
require 'nice_hash'
my_string = '{"val":"test","val1":"test1","val2":"test2"}'
# on my_hash will have the json as a hash, even when nested with arrays
my_hash = my_string.json
# you can filter and get what you want even when nested with arrays
vals = my_string.json(:val1, :val2)
# even you can access the keys like this:
puts my_hash._val1
puts my_hash.val1
puts my_hash[:val1]
None of the configuration above worked for me on my CentOS 7 server. After hours of searching, that's what worked for me:
Edit file phpMyAdmin.conf
sudo nano /etc/httpd/conf.d/phpMyAdmin.conf
And replace this at the top:
<Directory /usr/share/phpMyAdmin/>
AddDefaultCharset UTF-8
<IfModule mod_authz_core.c>
# Apache 2.4
<RequireAny>
#Require ip 127.0.0.1
#Require ip ::1
Require all granted
</RequireAny>
</IfModule>
<IfModule !mod_authz_core.c>
# Apache 2.2
Order Deny,Allow
Deny from All
Allow from 127.0.0.1
Allow from ::1
</IfModule>
</Directory>
Count distinct values, use nunique
:
df['hID'].nunique()
5
Count only non-null values, use count
:
df['hID'].count()
8
Count total values including null values, use the size
attribute:
df['hID'].size
8
Use boolean indexing:
df.loc[df['mID']=='A','hID'].agg(['nunique','count','size'])
OR using query
:
df.query('mID == "A"')['hID'].agg(['nunique','count','size'])
Output:
nunique 5
count 5
size 5
Name: hID, dtype: int64
If you do not want to install sqlplus
on your server/machine then the following command-line tool can be your friend. It is a simple Java application, only Java 8 that you need in order to you can execute this tool.
The tool can be used to run any SQL from the Linux bash or Windows command line.
Example:
java -jar sql-runner-0.2.0-with-dependencies.jar \
-j jdbc:oracle:thin:@//oracle-db:1521/ORCLPDB1.localdomain \
-U "SYS as SYSDBA" \
-P Oradoc_db1 \
"select 1 from dual"
Documentation is here.
You can download the binary file from here.
On Windows, you can also use the Win32 File Namespace prefixed with \\?\
to refer to your local directories:
\\?\C:\my_dir
Please check: http://man7.org/linux/man-pages/man5/proc.5.html
address perms offset dev inode pathname
00400000-00452000 r-xp 00000000 08:02 173521 /usr/bin/dbus-daemon
The address field is the address space in the process that the mapping occupies.
The perms field is a set of permissions:
r = read
w = write
x = execute
s = shared
p = private (copy on write)
The offset field is the offset into the file/whatever;
dev is the device (major:minor);
inode is the inode on that device.0 indicates that no inode is associated with the memoryregion, as would be the case with BSS (uninitialized data).
The pathname field will usually be the file that is backing the mapping. For ELF files, you can easily coordinate with the offset field by looking at the Offset field in the ELF program headers (readelf -l).
Under Linux 2.0, there is no field giving pathname.
I had a similar issue. It is caused due the dependent package 'rJava'. This problem can be overcome by re-directing the R to use a different JAVA_HOME
.
if(Sys.getenv("JAVA_HOME")!=""){
Sys.setenv(JAVA_HOME="")
}
library(rJava)
This worked for me.
According to this MSDN blog: https://blogs.msdn.microsoft.com/manishagarwal/2005/09/28/resolving-file-references-in-team-build-part-2/
There is a search order for assemblies when building. The search order is as follows:
So, if the desired assembly is found by HintPath, but an alternate assembly can be found using ReferencePath, it will prefer the ReferencePath'd assembly to the HintPath'd one.
In java8, I would use the Instant
class which is already in UTC and is convenient to work with.
import java.time.Instant;
Instant ins = Instant.now();
long ts = ins.toEpochMilli();
Instant ins2 = Instant.ofEpochMilli(ts)
Alternatively, you can use the following:
import java.time.*;
Instant ins = Instant.now();
OffsetDateTime odt = ins.atOffset(ZoneOffset.UTC);
ZonedDateTime zdt = ins.atZone(ZoneId.of("UTC"));
Back to Instant
Instant ins4 = Instant.from(odt);
You can add style for :after a like html code.
For example:
var value = 22;
body.append('<style>.wrapper:after{border-top-width: ' + value + 'px;}</style>');
You do not need regular expressions to check if a substring exists in a string.
line = 'This,is,a,sample,string'
result = bool('sample' in line) # returns True
If you want to know if a string contains a pattern then you should use re.search
line = 'This,is,a,sample,string'
result = re.search(r'sample', line) # finds 'sample'
This is best used with pattern matching, for example:
line = 'my name is bob'
result = re.search(r'my name is (\S+)', line) # finds 'bob'
It worked for me:
CGFloat boldTextFontSize = 17.0f;
myLabel.text = [NSString stringWithFormat:@"%@ 2012/10/14 %@",@"Updated:",@"21:59 PM"];
NSRange range1 = [myLabel.text rangeOfString:@"Updated:"];
NSRange range2 = [myLabel.text rangeOfString:@"21:59 PM"];
NSMutableAttributedString *attributedText = [[NSMutableAttributedString alloc] initWithString:myLabel.text];
[attributedText setAttributes:@{NSFontAttributeName:[UIFont boldSystemFontOfSize:boldTextFontSize]}
range:range1];
[attributedText setAttributes:@{NSFontAttributeName:[UIFont boldSystemFontOfSize:boldTextFontSize]}
range:range2];
myLabel.attributedText = attributedText;
For Swift version: See Here
If you decide to use Underscore.js you better do
var foo = { 'alpha' : 'puffin', 'beta' : 'beagle' };
var keys = [];
_.each( foo, function( val, key ) {
keys.push(key);
});
console.log(keys);
input location.bat
@echo off
cls
set /p "location"="bob"
echo We're working with %location%
pause
output
We're working with bob
(mistakes u done : space
and " "
)
Yes, you can use filter if you know at which position in the tuple the desired column resides. If the case is that the id is the first element of the tuple then you can filter the list like so:
filter(lambda t: t[0]==10, mylist)
This will return the list of corresponding tuples. If you want the age, just pick the element you want. Instead of filter you could also use list comprehension and pick the element in the first go. You could even unpack it right away (if there is only one result):
[age] = [t[1] for t in mylist if t[0]==10]
But I would strongly recommend to use dictionaries or named tuples for this purpose.
You are actually getting a reference to a new string, the string itself is not being changed as it is immutable. This is relevant.
See
Try
L.replaceAll("(\\t|\\r?\\n)+", " ");
Depending on the system a linefeed is either \r\n
or just \n
.
python -mhtmllib test.html
or curl http://www.comanyname.com/somepage.html|python -mhtmllib -
Have a look on one of your own credit cards. It'll have some text like EXPIRES END
or VALID THRU
above the date. So the card expires at the end of the given month.
The first responder can be any instance of the class UIResponder, so there are other classes that might be the first responder despite the UIViews. For example UIViewController
might also be the first responder.
In this gist you will find a recursive way to get the first responder by looping through the hierarchy of controllers starting from the rootViewController of the application's windows.
You can retrieve then the first responder by doing
- (void)foo
{
// Get the first responder
id firstResponder = [UIResponder firstResponder];
// Do whatever you want
[firstResponder resignFirstResponder];
}
However, if the first responder is not a subclass of UIView or UIViewController, this approach will fail.
To fix this problem we can do a different approach by creating a category on UIResponder
and perform some magic swizzeling to be able to build an array of all living instances of this class. Then, to get the first responder we can simple iterate and ask each object if -isFirstResponder
.
This approach can be found implemented in this other gist.
Hope it helps.
You can simply use the below function, You can also change the type element.
$("input[type=hidden]").bind("change", function() {
alert($(this).val());
});
Changes in value to hidden elements don't automatically fire the .change() event. So, wherever it is that you're setting that value, you also have to tell jQuery to trigger it.
HTML
<div id="message"></div>
<input type="hidden" id="testChange" value="0" />
JAVASCRIPT
var $message = $('#message');
var $testChange = $('#testChange');
var i = 1;
function updateChange() {
$message.html($message.html() + '<p>Changed to ' + $testChange.val() + '</p>');
}
$testChange.on('change', updateChange);
setInterval(function() {
$testChange.val(++i).trigger('change');;
console.log("value changed" +$testChange.val());
}, 3000);
updateChange();
should work as expected.
my.ini LOCATION ON WINDOWS MYSQL 5.6 MSI (USING THE INSTALL WIZARD)
Open a Windows command shell and type: echo %PROGRAMDATA%
. On Windows Vista this results in: C:\ProgramData
.
According to http://dev.mysql.com/doc/refman/5.6/en/option-files.html, the first location MySQL will look under is in %PROGRAMDATA%\MySQL\MySQL Server 5.6\my.ini
. In your Windows shell if you do ls "%PROGRAMDATA%\MySQL\MySQL Server 5.6\my.ini"
, you will see that the file is there.
Unlike most suggestions you will find in Stackoverflow and around the web, putting the file in C:\Program Files\MySQL\MySQL Server 5.6\my.ini
WILL NOT WORK. Neither will C:\Program Files (x86)\MySQL\MySQL Server 5.1
. The reason being quoted on the MySQL link posted above:
On Windows, MySQL programs read startup options from the following files, in the specified order (top items are used first).
The 5.6 MSI installer does create a my.ini in the highest priority location, meaning no other file will ever be found/used, except for the one created by the installer.
The solution accepted above will not work for 5.6 MSI-based installs.
Source: https://nickjanetakis.com/blog/docker-tip-2-the-difference-between-copy-and-add-in-a-dockerile:
COPY and ADD are both Dockerfile instructions that serve similar purposes. They let you copy files from a specific location into a Docker image.
COPY takes in a src and destination. It only lets you copy in a local file or directory from your host (the machine building the Docker image) into the Docker image itself.
ADD lets you do that too, but it also supports 2 other sources. First, you can use a URL instead of a local file / directory. Secondly, you can extract a tar file from the source directly into the destination
A valid use case for ADD is when you want to extract a local tar file into a specific directory in your Docker image.
If you’re copying in local files to your Docker image, always use COPY because it’s more explicit.
Guava has a very powerful searching capabilities when it comes to such type of problems. For example, if your area searching an object based on one of it properties you may consider:
Iterables.tryFind(listOfCats, new Predicate<Cat>(){
@Override
boolean apply(@Nullable Cat input) {
return "tom".equalsIgnoreCase(input.name());
}
}).or(new Cat("Tom"));
in case it's possible that the Tom cat is not in the listOfCats, it will be returned, thus allowing you to avoid NPE.
Here is a simplified version (the gist) of Mick Cullen's answer -- in part to prove that it needn't be very complex to implement this; in part to give a quick reference for anyone who isn't interested in reading pages and pages of code.
You have to make you app use connect-busboy:
var busboy = require("connect-busboy");
app.use(busboy());
This will not do anything until you trigger it. Within the call that handles uploading, do the following:
app.post("/upload", function(req, res) {
if(req.busboy) {
req.busboy.on("file", function(fieldName, fileStream, fileName, encoding, mimeType) {
//Handle file stream here
});
return req.pipe(req.busboy);
}
//Something went wrong -- busboy was not loaded
});
Let's break this down:
req.busboy
is set (the middleware was loaded correctly)"file"
listener on req.busboy
req
to req.busboy
Inside the file listener there are a couple of interesting things, but what really matters is the fileStream
: this is a Readable, that can then be written to a file, like you usually would.
Pitfall: You must handle this Readable, or express will never respond to the request, see the busboy API (file section).
#!/bin/bash
set -e
_onexit() {
[[ $TMPD ]] && rm -rf "$TMPD"
}
TMPD="$(mktemp -d)"
trap _onexit EXIT
_time_2() {
"$@" 2>&3
}
_time_1() {
time _time_2 "$@"
}
_time() {
declare time_label="$1"
shift
exec 3>&2
_time_1 "$@" 2>"$TMPD/timing.$time_label"
echo "time[$time_label]"
cat "$TMPD/timing.$time_label"
}
_time a _do_something
_time b _do_another_thing
_time c _finish_up
This has the benefit of not spawning sub shells, and the final pipeline has it's stderr restored to the real stderr.
A simple graphic makes this clearer:
git diff
Shows the changes between the working directory and the index. This shows what has been changed, but is not staged for a commit.
git diff --cached
Shows the changes between the index and the HEAD (which is the last commit on this branch). This shows what has been added to the index and staged for a commit.
git diff HEAD
Shows all the changes between the working directory and HEAD (which includes changes in the index). This shows all the changes since the last commit, whether or not they have been staged for commit or not.
Also:
There is a bit more detail on 365Git.
What @VonC says is correct, but you can put the commands to set debug directly into VM
arguments on jBoss
Launch.
To do that, open jBoss
server inside Eclipse
, go to Open launch configuration and put this in VM
arguments textbox
:
vm args
Save this python script to known_hosts.py
:
#! /usr/bin/env python
# $Id$
# Convert OpenSSH known_hosts and known_hosts2 files to "new format" PuTTY
# host keys.
# usage:
# kh2reg.py [ --win ] known_hosts1 2 3 4 ... > hosts.reg
# Creates a Windows .REG file (double-click to install).
# kh2reg.py --unix known_hosts1 2 3 4 ... > sshhostkeys
# Creates data suitable for storing in ~/.putty/sshhostkeys (Unix).
# Line endings are someone else's problem as is traditional.
# Developed for Python 1.5.2.
import fileinput
import base64
import struct
import string
import re
import sys
import getopt
def winmungestr(s):
"Duplicate of PuTTY's mungestr() in winstore.c:1.10 for Registry keys"
candot = 0
r = ""
for c in s:
if c in ' \*?%~' or ord(c)<ord(' ') or (c == '.' and not candot):
r = r + ("%%%02X" % ord(c))
else:
r = r + c
candot = 1
return r
def strtolong(s):
"Convert arbitrary-length big-endian binary data to a Python long"
bytes = struct.unpack(">%luB" % len(s), s)
return reduce ((lambda a, b: (long(a) << 8) + long(b)), bytes)
def longtohex(n):
"""Convert long int to lower-case hex.
Ick, Python (at least in 1.5.2) doesn't appear to have a way to
turn a long int into an unadorned hex string -- % gets upset if the
number is too big, and raw hex() uses uppercase (sometimes), and
adds unwanted "0x...L" around it."""
plain=string.lower(re.match(r"0x([0-9A-Fa-f]*)l?$", hex(n), re.I).group(1))
return "0x" + plain
output_type = 'windows'
try:
optlist, args = getopt.getopt(sys.argv[1:], '', [ 'win', 'unix' ])
if filter(lambda x: x[0] == '--unix', optlist):
output_type = 'unix'
except getopt.error, e:
sys.stderr.write(str(e) + "\n")
sys.exit(1)
if output_type == 'windows':
# Output REG file header.
sys.stdout.write("""REGEDIT4
[HKEY_CURRENT_USER\Software\SimonTatham\PuTTY\SshHostKeys]
""")
# Now process all known_hosts input.
for line in fileinput.input(args):
try:
# Remove leading/trailing whitespace (should zap CR and LF)
line = string.strip (line)
# Skip blanks and comments
if line == '' or line[0] == '#':
raise "Skipping input line"
# Split line on spaces.
fields = string.split (line, ' ')
# Common fields
hostpat = fields[0]
magicnumbers = [] # placeholder
keytype = "" # placeholder
# Grotty heuristic to distinguish known_hosts from known_hosts2:
# is second field entirely decimal digits?
if re.match (r"\d*$", fields[1]):
# Treat as SSH-1-type host key.
# Format: hostpat bits10 exp10 mod10 comment...
# (PuTTY doesn't store the number of bits.)
magicnumbers = map (long, fields[2:4])
keytype = "rsa"
else:
# Treat as SSH-2-type host key.
# Format: hostpat keytype keyblob64 comment...
sshkeytype, blob = fields[1], base64.decodestring (fields[2])
# 'blob' consists of a number of
# uint32 N (big-endian)
# uint8[N] field_data
subfields = []
while blob:
sizefmt = ">L"
(size,) = struct.unpack (sizefmt, blob[0:4])
size = int(size) # req'd for slicage
(data,) = struct.unpack (">%lus" % size, blob[4:size+4])
subfields.append(data)
blob = blob [struct.calcsize(sizefmt) + size : ]
# The first field is keytype again, and the rest we can treat as
# an opaque list of bignums (same numbers and order as stored
# by PuTTY). (currently embedded keytype is ignored entirely)
magicnumbers = map (strtolong, subfields[1:])
# Translate key type into something PuTTY can use.
if sshkeytype == "ssh-rsa": keytype = "rsa2"
elif sshkeytype == "ssh-dss": keytype = "dss"
else:
raise "Unknown SSH key type", sshkeytype
# Now print out one line per host pattern, discarding wildcards.
for host in string.split (hostpat, ','):
if re.search (r"[*?!]", host):
sys.stderr.write("Skipping wildcard host pattern '%s'\n"
% host)
continue
elif re.match (r"\|", host):
sys.stderr.write("Skipping hashed hostname '%s'\n" % host)
continue
else:
m = re.match (r"\[([^]]*)\]:(\d*)$", host)
if m:
(host, port) = m.group(1,2)
port = int(port)
else:
port = 22
# Slightly bizarre output key format: 'type@port:hostname'
# XXX: does PuTTY do anything useful with literal IP[v4]s?
key = keytype + ("@%d:%s" % (port, host))
value = string.join (map (longtohex, magicnumbers), ',')
if output_type == 'unix':
# Unix format.
sys.stdout.write('%s %s\n' % (key, value))
else:
# Windows format.
# XXX: worry about double quotes?
sys.stdout.write("\"%s\"=\"%s\"\n"
% (winmungestr(key), value))
except "Unknown SSH key type", k:
sys.stderr.write("Unknown SSH key type '%s', skipping\n" % k)
except "Skipping input line":
pass
Tested on Win7x64 and Python 2.7.
Then run:
ssh-keyscan -t rsa bitbucket.org >>~/.ssh/known_hosts
python --win known_hosts.py >known_hosts.reg
start known_hosts.reg
And choose to import into the registry. The keyscan will retrieve the public key for the domain (I had my problems with bitbucket), and then the python script will convert it to Plink format.
I solved this in my env, without modify hadoop-env.sh
You'd be better using /bin/bash
as default shell not /bin/sh
Check these before:
echo $JAVA_HOME
)echo $SHELL
in every node, check if print /bin/bash
if not, vi /etc/passwd
, add /bin/bash
at tail of your username
ref
Try this JavaScript code:
function printout() {
var newWindow = window.open();
newWindow.document.write(document.getElementById("output").innerHTML);
newWindow.print();
}
I had this problem recently and the problem was that my web server was not configured to serve woff files. For IIS 7, you can select your site, then select the MIME Types icon. If .woff is not in the list, you need to add it. The correct values are
File name extension: .woff
MIME type: application/font-woff
The reason why EF framework prompt 'no key' is that EF framework needs a primary key in database. To declaratively tell EF which property the key is, you add a [Key]
annotation. Or, the quickest way, add an ID
property. Then, the EF framework will take ID
as the primary key by default.
Use CSS :
input[type=submit] {
background:url("BUTTON1.jpg");
}
For HTML :
<input type="submit" value="Login" style="background:url("BUTTON1.jpg");">
<?php
ob_start();
system('ipconfig/all');
$mycom=ob_get_contents();
ob_clean();
$findme = "Physical";
$pmac = strpos($mycom, $findme);
$mac=substr($mycom,($pmac+36),17);
echo $mac;
?>
This prints the mac address of client machine
here is the string you can use with -w
, contains all options that curl -w
supports.
{"contentType":"%{content_type}","filenameEffective":"%{filename_effective}","ftpEntryPath":"%{ftp_entry_path}","httpCode":"%{http_code}","httpConnect":"%{http_connect}","httpVersion":"%{http_version}","localIp":"%{local_ip}","localPort":"%{local_port}","numConnects":"%{num_connects}","numRedirects":"%{num_redirects}","proxySslVerifyResult":"%{proxy_ssl_verify_result}","redirectUrl":"%{redirect_url}","remoteIp":"%{remote_ip}","remotePort":"%{remote_port}","scheme":"%{scheme}","size":{"download":"%{size_download}","header":"%{size_header}","request":"%{size_request}","upload":"%{size_upload}"},"speed":{"download":"%{speed_download}","upload":"%{speed_upload}"},"sslVerifyResult":"%{ssl_verify_result}","time":{"appconnect":"%{time_appconnect}","connect":"%{time_connect}","namelookup":"%{time_namelookup}","pretransfer":"%{time_pretransfer}","redirect":"%{time_redirect}","starttransfer":"%{time_starttransfer}","total":"%{time_total}"},"urlEffective":"%{url_effective}"}
outputs JSON.
You should use:
if (image_array !== undefined && image_array.length > 0)
Try this
SELECT DATEDIFF(DAY, DATEADD(day, -1, '2013-03-13 00:00:00.000'), GETDATE())
OR
SELECT DATEDIFF(DAY, DATEADD(day, -1, @CreatedDate), GETDATE())
One ArrayList1 add to data,
mArrayList1.add(data);
and Second ArrayList2 to add other data,
mArrayList2.addAll(mArrayList1);
In my case, IIS was fine but.. uh.. all the files in the folder except web.config had been deleted (a manual deployment half-done on a test site).
[EDIT]
The expected output of the pluck
function has changed from Laravel 5.1 to 5.2. Hence why it is marked as deprecated in 5.1
In Laravel 5.1, pluck
gets a single column's value from the first result of a query.
In Laravel 5.2, pluck
gets an array with the values of a given column. So it's no longer deprecated, but it no longer do what it used to.
So short answer is use the value
function if you want one column from the first row and you are using Laravel 5.1 or above.
Thanks to Tomas Buteler for pointing this out in the comments.
[ORIGINAL] For anyone coming across this question who is using Laravel 5.1, pluck() has been deprecated and will be removed completely in Laravel 5.2.
Consider future proofing your code by using value()
instead.
return DB::table('users')->where('username', $username)->value('groupName');
I would suggest adding stdout
and stderr
file in systemd service
file itself.
Referring : https://www.freedesktop.org/software/systemd/man/systemd.exec.html#StandardOutput=
As you have configured it should not like:
StandardOutput=/home/user/log1.log
StandardError=/home/user/log2.log
It should be:
StandardOutput=file:/home/user/log1.log
StandardError=file:/home/user/log2.log
This works when you don't want to restart the service again and again.
This will create a new file and does not append to the existing file.
Use Instead:
StandardOutput=append:/home/user/log1.log
StandardError=append:/home/user/log2.log
NOTE: Make sure you create the directory already. I guess it does not support to create a directory.
I faced the same issue. I updated my Android studio and used API 25 target as Android 7.1.1 and X86 and everything worked fine. I use Google play services and firebase for my project
var flags = inputstring.replace(/.*\/([gimy]*)$/, '$1');
var pattern = inputstring.replace(new RegExp('^/(.*?)/'+flags+'$'), '$1');
var regex = new RegExp(pattern, flags);
or
var match = inputstring.match(new RegExp('^/(.*?)/([gimy]*)$'));
// sanity check here
var regex = new RegExp(match[1], match[2]);
If you have Centos or other Linux distribution you have to install phpunit package, I did that with yum install phpunit and it worked. Maybe you can have to add a repository, but I think it has to work smooth with the default ones (I have CentOS 7)
Similar to getting the length of a dataframe, len(df)
, the following worked for pandas and blaze:
Total = sum(df['MyColumn'])
or alternatively
Total = sum(df.MyColumn)
print Total
In 2007-9 I developed some software for reading datamatrix patterns. Often these patterns were difficult to read, being indented into scratched surfaces with all kinds of reflectance properties, fuzzy chemically etched markings and so on. I used a GA to fine tune various parameters of the vision algorithms to give the best results on a database of 300 images having known properties. Parameters were things like downsampling resolution, RANSAC parameters, amount of erosion and dilation, low pass filtering radius, and a few others. Running the optimisation over several days this produced results which were about 20% better than naive values on a test set of images unseen during the optimisation phase.
This system was completely written from scratch, and I didn't use any other libraries. I'm not opposed to using such things, provided that they give a reliable result, but you have to be careful about license compatibility and code portability issues.
Make sure you specify pass header=None
and add usecols=[3,6]
for the 4th and 7th columns.
The following steps are used to authenticate yourself to the host
ssh-keygen -f ~/.ssh/id_ecdsa -t ecdsa -b 521
(above uses the recommended encryption technique)
ssh-copy-id -i ~/.ssh/id_ecdsa user@host
N.B the user @ host will be different to you. You will need to type in the password for this server, not the keys password.
ssh user@host
All source information is located here: ssh-keygen
Previously, you would do this through NPAPI plugins.
However, Google is now phasing out NPAPI for Chrome, so the preferred way to do this is using the native messaging API. The external application would have to register a native messaging host in order to exchange messages with your application.
First Suggestion:
Create a Javascript Variable that will reference the button clicked. Lets call it buttonIndex
<input type="submit" onclick="buttonIndex=0;" name="save" value="Save" />
<input type="submit" onclick="buttonIndex=1;" name="saveAndAdd" value="Save and add another" />
Now, you can access that value. 0 means the save button was clicked, 1 means the saveAndAdd Button was clicked.
Second Suggestion
The way I would handle this is to create two JS functions that handle each of the two buttons.
First, make sure your form has a valid ID. For this example, I'll say the ID is "myForm"
change
<input type="submit" name="save" value="Save" />
<input type="submit" name="saveAndAdd" value="Save and add another" />
to
<input type="submit" onclick="submitFunc();return(false);" name="save" value="Save" />
<input type="submit" onclick="submitAndAddFunc();return(false);" name="saveAndAdd" value="Save and add
the return(false) will prevent your form submission from actually processing, and call your custom functions, where you can submit the form later on.
Then your functions will work something like this...
function submitFunc(){
// Do some asyncrhnous stuff, that will later on submit the form
if (okToSubmit) {
document.getElementById('myForm').submit();
}
}
function submitAndAddFunc(){
// Do some asyncrhnous stuff, that will later on submit the form
if (okToSubmit) {
document.getElementById('myForm').submit();
}
}
Looking at the two's complement system from a math point of view it really makes sense. In ten's complement, the idea is to essentially 'isolate' the difference.
Example: 63 - 24 = x
We add the complement of 24 which is really just (100 - 24). So really, all we are doing is adding 100 on both sides of the equation.
Now the equation is: 100 + 63 - 24 = x + 100, that is why we remove the 100 (or 10 or 1000 or whatever).
Due to the inconvenient situation of having to subtract one number from a long chain of zeroes, we use a 'diminished radix complement' system, in the decimal system, nine's complement.
When we are presented with a number subtracted from a big chain of nines, we just need to reverse the numbers.
Example: 99999 - 03275 = 96724
That is the reason, after nine's complement, we add 1. As you probably know from childhood math, 9 becomes 10 by 'stealing' 1. So basically it's just ten's complement that takes 1 from the difference.
In Binary, two's complement is equatable to ten's complement, while one's complement to nine's complement. The primary difference is that instead of trying to isolate the difference with powers of ten (adding 10, 100, etc. into the equation) we are trying to isolate the difference with powers of two.
It is for this reason that we invert the bits. Just like how our minuend is a chain of nines in decimal, our minuend is a chain of ones in binary.
Example: 111111 - 101001 = 010110
Because chains of ones are 1 below a nice power of two, they 'steal' 1 from the difference like nine's do in decimal.
When we are using negative binary number's, we are really just saying:
0000 - 0101 = x
1111 - 0101 = 1010
1111 + 0000 - 0101 = x + 1111
In order to 'isolate' x, we need to add 1 because 1111 is one away from 10000 and we remove the leading 1 because we just added it to the original difference.
1111 + 1 + 0000 - 0101 = x + 1111 + 1
10000 + 0000 - 0101 = x + 10000
Just remove 10000 from both sides to get x, it's basic algebra.
I had the same problem. And after a hard work, I found a easy and full solution:
The code looks like this:
runas /user:[USERNAME] "psexec -e -h -s -u [USERNAME] -p [PASSWORD] \\[COMPUTERNAME] cmd /C [COMMAND1] & [COMMAND2]"
If you whant to debug your script in the another machine, run the following template:
runas /user:[USERNAME] "psexec -i -e -h -s -u [USERNAME] -p [PASSWORD] \\[COMPUTERNAME] cmd /C [COMMAND1] & [COMMAND2] & pause"
It will be better to Create a New role, then grant execute, select ... etc permissions to this role and finally assign users to this role.
Create role
CREATE ROLE [db_SomeExecutor]
GO
Grant Permission to this role
GRANT EXECUTE TO db_SomeExecutor
GRANT INSERT TO db_SomeExecutor
to Add users database>security> > roles > databaseroles>Properties > Add ( bottom right ) you can search AD users and add then
OR
EXEC sp_addrolemember 'db_SomeExecutor', 'domainName\UserName'
Please refer this post
Well actually github is much simpler than we think and absolutely it happens whenever we try to push even after we explicitly inserted some files in our git repository so, in order to fix the issue simply try..
: git pull
and then..
: git push
Note: if you accidently stuck in vim editor after pulling your repository than don't worry just close vim editor and try push :)
Try to get using:
var count = $("ul > li").size();
alert(count);
function post(path, params, method) {
method = method || "post"; // Set method to post by default if not specified.
var form = document.createElement("form");
form.setAttribute("method", method);
form.setAttribute("action", path);
for(var key in params) {
if(params.hasOwnProperty(key)) {
var hiddenField = document.createElement("input");
hiddenField.setAttribute("type", "hidden");
hiddenField.setAttribute("name", key);
hiddenField.setAttribute("value", params[key]);
form.appendChild(hiddenField);
}
}
document.body.appendChild(form);
form.submit();
}
Example:
post('url', {name: 'Johnny Bravo'});
I found something interesting in SQL server when checking if inner joins are faster than left joins.
If you dont include the items of the left joined table, in the select statement, the left join will be faster than the same query with inner join.
If you do include the left joined table in the select statement, the inner join with the same query was equal or faster than the left join.
If you want to by pass the time and resources it takes to count(*) your 3million row tables. Try this per SQL SERVER Central by Kendal Van Dyke.
Row Counts Using sysindexes If you're using SQL 2000 you'll need to use sysindexes like so:
-- Shows all user tables and row counts for the current database
-- Remove OBJECTPROPERTY function call to include system objects
SELECT o.NAME,
i.rowcnt
FROM sysindexes AS i
INNER JOIN sysobjects AS o ON i.id = o.id
WHERE i.indid < 2 AND OBJECTPROPERTY(o.id, 'IsMSShipped') = 0
ORDER BY o.NAME
If you're using SQL 2005 or 2008 querying sysindexes will still work but Microsoft advises that sysindexes may be removed in a future version of SQL Server so as a good practice you should use the DMVs instead, like so:
-- Shows all user tables and row counts for the current database
-- Remove is_ms_shipped = 0 check to include system objects
-- i.index_id < 2 indicates clustered index (1) or hash table (0)
SELECT o.name,
ddps.row_count
FROM sys.indexes AS i
INNER JOIN sys.objects AS o ON i.OBJECT_ID = o.OBJECT_ID
INNER JOIN sys.dm_db_partition_stats AS ddps ON i.OBJECT_ID = ddps.OBJECT_ID
AND i.index_id = ddps.index_id
WHERE i.index_id < 2 AND o.is_ms_shipped = 0 ORDER BY o.NAME
You can't and shouldn't modify a list while iterating over it. You can solve this by temporarely saving the objects to remove:
List<Object> toRemove = new ArrayList<Object>();
for(Object a: list){
if(a.getXXX().equalsIgnoreCase("AAA")){
toRemove.add(a);
}
}
list.removeAll(toRemove);
You can use (mouseover)
and (mouseout)
events.
component.ts
changeText:boolean=true;
component.html
<div (mouseover)="changeText=true" (mouseout)="changeText=false">
<span [hidden]="changeText">Hide</span>
<span [hidden]="!changeText">Show</span>
</div>
If both arrays are in the correct order; where each item corresponds to its associated member identifier then you can simply use.
var merge = _.merge(arr1, arr2);
Which is the short version of:
var merge = _.chain(arr1).zip(arr2).map(function(item) {
return _.merge.apply(null, item);
}).value();
Or, if the data in the arrays is not in any particular order, you can look up the associated item by the member value.
var merge = _.map(arr1, function(item) {
return _.merge(item, _.find(arr2, { 'member' : item.member }));
});
You can easily convert this to a mixin. See the example below:
_.mixin({_x000D_
'mergeByKey' : function(arr1, arr2, key) {_x000D_
var criteria = {};_x000D_
criteria[key] = null;_x000D_
return _.map(arr1, function(item) {_x000D_
criteria[key] = item[key];_x000D_
return _.merge(item, _.find(arr2, criteria));_x000D_
});_x000D_
}_x000D_
});_x000D_
_x000D_
var arr1 = [{_x000D_
"member": 'ObjectId("57989cbe54cf5d2ce83ff9d6")',_x000D_
"bank": 'ObjectId("575b052ca6f66a5732749ecc")',_x000D_
"country": 'ObjectId("575b0523a6f66a5732749ecb")'_x000D_
}, {_x000D_
"member": 'ObjectId("57989cbe54cf5d2ce83ff9d8")',_x000D_
"bank": 'ObjectId("575b052ca6f66a5732749ecc")',_x000D_
"country": 'ObjectId("575b0523a6f66a5732749ecb")'_x000D_
}];_x000D_
_x000D_
var arr2 = [{_x000D_
"member": 'ObjectId("57989cbe54cf5d2ce83ff9d8")',_x000D_
"name": 'yyyyyyyyyy',_x000D_
"age": 26_x000D_
}, {_x000D_
"member": 'ObjectId("57989cbe54cf5d2ce83ff9d6")',_x000D_
"name": 'xxxxxx',_x000D_
"age": 25_x000D_
}];_x000D_
_x000D_
var arr3 = _.mergeByKey(arr1, arr2, 'member');_x000D_
_x000D_
document.body.innerHTML = JSON.stringify(arr3, null, 4);
_x000D_
body { font-family: monospace; white-space: pre; }
_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/lodash.js/4.14.0/lodash.min.js"></script>
_x000D_
For future questioners: If you can't drop the tables from the console, try to create a migration that drops the tables for you. You should create a migration and then in the file note tables you want dropped like this:
class DropTables < ActiveRecord::Migration
def up
drop_table :table_you_dont_want
end
def down
raise ActiveRecord::IrreversibleMigration
end
end
Try this it work.
<table>
<thead>
<tr>
<td width="300">need 300px</td>
I found this extremely helpful, and it solved my problem. This command will allow your 2FA to do its thing (and save you the trouble of entering your username and password):
git config --global --add url."[email protected]:".insteadOf "https://github.com/"
Source: http://albertech.blogspot.com/2016/11/fix-git-error-could-not-read-username.html
If you're not using 2FA, you can still use SSH and this will work.
Edit: added the --add
flag as suggested by slatunje.
You can also use
$(document).ready(function() {
//some even that will run ajax request - for example click on a button
var uname = $('#username').val();
$.ajax({
type: 'POST',
url: 'func.php', //this should be url to your PHP file
dataType: 'html',
data: {func: 'toptable', user_id: uname},
beforeSend: function() {
$('#right').html('checking');
},
complete: function() {},
success: function(html) {
$('#right').html(html);
}
});
});
And your func.php:
function toptable()
{
echo 'something happens in here';
}
Hope it helps somebody
Use an HTML line break (<br />
) to force a line break within a table cell:
|Something|Something else<br />that's rather long|Something else|
Try this:
var i, j;
for (i = 0; i < cubes.length; i++) {
for (j = 0; j < cubes[i].length; j++) {
do whatever with cubes[i][j];
}
}
If you want to only update on rows that are not currently uppercase (instead of all rows), you'd need to identify the difference using COLLATE
like this:
UPDATE MyTable
SET MyColumn = UPPER(MyColumn)
WHERE MyColumn != UPPER(MyColumn) COLLATE Latin1_General_CS_AS
Cases sensitivity is based on your collation settings, and is typically case insensitive by default.
Collation can be set at the Server, Database, Column, or Query Level:
-- Server
SELECT SERVERPROPERTY('COLLATION')
-- Database
SELECT name, collation_name FROM sys.databases
-- Column
SELECT COLUMN_NAME, COLLATION_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE CHARACTER_SET_NAME IS NOT NULL
Collation Names specify how a string should be encoded and read, for example:
Latin1_General_CI_AS
? Case InsensitiveLatin1_General_CS_AS
? Case SensitiveIf you want to know this, it exists an open source library called aFileDialog that it is an small and easy to use which provides a file picker.
The difference with another file chooser's libraries for Android is that aFileDialog gives you the option to open the file chooser as a Dialog and as an Activity.
It also lets you to select folders, create files, filter files using regular expressions and show confirmation dialogs.
Here's a link that helped me with this.
It uses PagedList.MVC NuGet package. I'll try to summarize the steps
Install the PagedList.MVC NuGet package
Build project
Add using PagedList;
to the controller
Modify your action to set page
public ActionResult ListMyItems(int? page)
{
List list = ItemDB.GetListOfItems();
int pageSize = 3;
int pageNumber = (page ?? 1);
return View(list.ToPagedList(pageNumber, pageSize));
}
Add paging links to the bottom of your view
@*Your existing view*@
Page @(Model.PageCount < Model.PageNumber ? 0 : Model.PageNumber) of @Model.PageCount
@Html.PagedListPager(Model, page => Url.Action("Index",
new { page, sortOrder = ViewBag.CurrentSort, currentFilter = ViewBag.CurrentFilter }))
You can find out what Git does with a file by seeing what it does when you add it to the index. The index is like a pre-commit. With the index committed, you can use git checkout
to bring everything that was in the index back into the working directory. So, what does Git do when you add a symbolic link to the index?
To find out, first, make a symbolic link:
$ ln -s /path/referenced/by/symlink symlink
Git doesn't know about this file yet. git ls-files
lets you inspect your index (-s
prints stat
-like output):
$ git ls-files -s ./symlink
[nothing]
Now, add the contents of the symbolic link to the Git object store by adding it to the index. When you add a file to the index, Git stores its contents in the Git object store.
$ git add ./symlink
So, what was added?
$ git ls-files -s ./symlink
120000 1596f9db1b9610f238b78dd168ae33faa2dec15c 0 symlink
The hash is a reference to the packed object that was created in the Git object store. You can examine this object if you look in .git/objects/15/96f9db1b9610f238b78dd168ae33faa2dec15c
in the root of your repository. This is the file that Git stores in the repository, that you can later check out. If you examine this file, you'll see it is very small. It does not store the contents of the linked file. To confirm this, print the contents of the packed repository object with git cat-file
:
$ git cat-file -p 1596f9db1b9610f238b78dd168ae33faa2dec15c
/path/referenced/by/symlink
(Note 120000
is the mode listed in ls-files
output. It would be something like 100644
for a regular file.)
But what does Git do with this object when you check it out from the repository and into your filesystem? It depends on the core.symlinks
config. From man git-config
:
core.symlinks
If false, symbolic links are checked out as small plain files that contain the link text.
So, with a symbolic link in the repository, upon checkout you either get a text file with a reference to a full filesystem path, or a proper symbolic link, depending on the value of the core.symlinks
config.
Either way, the data referenced by the symlink is not stored in the repository.
I find the m2eclipse plugin to be more useful. This provides nice tools like the POM editor and creating a Maven project from within Eclipse.
An old question, but I'll answer anyway. The answer to the actual question asked is that the bare return is redundant and should be left out.
Furthermore, the suggested value is false for the following reason:
if (ret<0) return;
Redefining a C reserved word as a macro is a bad idea on the face of it, but this particular suggestion is simply unsupportable, both as an argument and as code.
in addition to @JasonWoof perfect answer i want to show how i solved related problem
in my case encoding single quotes with '\''
will not always be sufficient, for example if a string must quoted with single quotes, but the total count of quotes results in odd amount
#!/bin/bash
# no closing quote
string='alecxs\'solution'
# this works for string
string="alecxs'solution"
string=alecxs\'solution
string='alecxs'\''solution'
let's assume string is a file name and we need to save quoted file names in a list (like stat -c%N ./* > list)
echo "'$string'" > "$string"
cat "$string"
but processing this list will fail (depending on how many quotes the string does contain in total)
while read file
do
ls -l "$file"
eval ls -l "$file"
done < "$string"
workaround: encode quotes with string manipulation
string="${string//$'\047'/\'\$\'\\\\047\'\'}"
# result
echo "$string"
now it works because quotes are always balanced
echo "'$string'" > list
while read file
do
ls -l "$file"
eval ls -l "$file"
done < list
Hope this helps when facing similar problem
Session in Asp.net:
1.Maintains the data accross all over the application.
2.Persists the data if current session is alive. If we need some data to accessible from multiple controllers acitons and views the session is the way to store and retreive data.
3.Sessions are server side files that contains user information. [Sessions are unique identifier that maps them to specific users]
Translating that to Web Servers: The server will store the pertinent information in the session object, and create a session ID which it will send back to the client in a cookie. When the client sends back the cookie, the server can simply look up the session object using the ID. So, if you delete the cookie, the session will be lost.
The java documentation suggests to make use of Calendar class instead of this deprecated way Here is the sample code to set up the calendar object
Calendar calendar = Calendar.getInstance();
calendar.setTime(new Date());
Here is the sample code to get the year, month, etc.
System.out.println(calendar.get(Calendar.YEAR));
System.out.println(calendar.get(Calendar.MONTH));
Calendar also has support for many other useful information like, TIME, DAY_OF_MONTH, etc. Here the documentation listing all of them Please note that the month are 0 based. January is 0th month.
Used Following Code
System.Windows.Forms.Application.Exit( )
Many 3rd party JavaScript libraries allow you to select all elements that have a CSS class of a particular name applied to them. Then you can iterate those elements and dynamically attach the handler.
There is no CSS-specific manner to do this.
In JQuery, you can do:
$(".myCssClass").click(function() { alert("hohoho"); });
I think this is best way to do it.
Its pretty much what everyone suggest, but uses blocks, which is a nice touch!
It might be that the code in your service somehow breaks out of Angular's zone. This breaks change detection. This should work:
import {Component, OnInit, NgZone} from 'angular2/core';
export class RecentDetectionComponent implements OnInit {
recentDetections: Array<RecentDetection>;
constructor(private zone:NgZone, // <== added
private recentDetectionService: RecentDetectionService) {
this.recentDetections = new Array<RecentDetection>();
}
getRecentDetections(): void {
this.recentDetectionService.getJsonFromApi()
.subscribe(recent => {
this.zone.run(() => { // <== added
this.recentDetections = recent;
console.log(this.recentDetections[0].macAddress)
});
});
}
ngOnInit() {
this.getRecentDetections();
let timer = Observable.timer(2000, 5000);
timer.subscribe(() => this.getRecentDetections());
}
}
For other ways to invoke change detection see Triggering change detection manually in Angular
Alternative ways to invoke change detection are
ChangeDetectorRef.detectChanges()
to immediately run change detection for the current component and its children
ChangeDetectorRef.markForCheck()
to include the current component the next time Angular runs change detection
ApplicationRef.tick()
to run change detection for the whole application
terminal 1
dd if=/dev/sda of=debian.img
terminal 2
killall -SIGUSR1 dd
go back to terminal 1
34292201+0 records in
34292200+0 records out
17557606400 bytes (18 GB) copied, 1034.7 s, 17.0 MB/s
1.Right click to Gitbash shortcut choose Properties
2.Choose "Shortcut" tab
3.Type your starting directory to "Start in" field
4.Remove "--cd-to-home" part from "Target" field
Contributing to ferrix example,
class Battery():
def __init__(self, battery_size = 60):
self.battery_size = battery_size
def get_range(self):
if self.battery_size == 70:
range = 240
elif self.battery_size == 85:
range = 270
message = "This car can go approx " + str(range)
message += "Fully charge"
print(message)
My message will not execute, because none of my conditions are fulfill therefore receiving " UnboundLocalError: local variable 'range' referenced before assignment"
def get_range(self):
if self.battery_size <= 70:
range = 240
elif self.battery_size >= 85:
range = 270
A straightforward conversion would be (again with a function):
def add_nulls2(int, cnt):
nulls = str(int)
for i in range(cnt - len(str(int))):
nulls = '0' + nulls
return nulls
It's entirely dependent upon the actual function and the meaning of the multiple values, and their sizes:
On windows platform, you have 2 choices:
In a command line terminal, type
c:\python23\python xxxx.py
Open the python editor IDLE from the menu, and open xxxx.py, then press F5 to run it.
For your posted code, the error is at this line:
def main(url, out_folder="C:\asdf\"):
It should be:
def main(url, out_folder="C:\\asdf\\"):
There is no difference in behavior that I can find between the two (other than the obvious null-case). As for which version to prefer, I would go with the second. It is the standard way of doing this in Java.
If it confuses readers of your code (because String[] instanceof Object[]
is true), you may want to use the first to be more explicit if code reviewers keep asking about it.
Like this. Make sure you drop the temp table (at the end of the code block, after you're done with it) or it will error on subsequent runs.
SELECT
tblMEP_Sites.Name AS SiteName,
convert(varchar(10),BillingMonth ,101) AS BillingMonth,
SUM(Consumption) AS Consumption
INTO
#MyTempTable
FROM
tblMEP_Projects
JOIN tblMEP_Sites
ON tblMEP_Projects.ID = tblMEP_Sites.ProjectID
JOIN tblMEP_Meters
ON tblMEP_Meters.SiteID = tblMEP_Sites.ID
JOIN tblMEP_MonthlyData
ON tblMEP_MonthlyData.MeterID = tblMEP_Meters.ID
JOIN tblMEP_CustomerAccounts
ON tblMEP_CustomerAccounts.ID = tblMEP_Meters.CustomerAccountID
JOIN tblMEP_UtilityCompanies
ON tblMEP_UtilityCompanies.ID = tblMEP_CustomerAccounts.UtilityCompanyID
JOIN tblMEP_MeterTypes
ON tblMEP_UtilityCompanies.UtilityTypeID = tblMEP_MeterTypes.ID
WHERE
tblMEP_Projects.ID = @ProjectID
AND tblMEP_MonthlyData.BillingMonth Between @StartDate AND @EndDate
AND tbLMEP_MeterTypes.ID = @MeterTypeID
GROUP BY
BillingMonth, tblMEP_Sites.Name
DROP TABLE #MyTempTable
I find this problem appearing when I've done a git add .
in a subdirectory below where my .gitignore
file lives (the home directory of my repository, so to speak). Try changing directories to your uppermost directory and running git add .
followed by git commit -m "my commit message"
.
Actually, the toString()
implementation does a join with commas by default:
var arr = [ 42, 55 ];
var str1 = arr.toString(); // Gives you "42,55"
var str2 = String(arr); // Ditto
I don't know if this is mandated by the JS spec but this is what most pretty much all browsers seem to be doing.
Simple arrow and clean code
select {
-webkit-appearance: none;
-moz-appearance: none;
appearance: none;
border: none;
background: transparent url(http://cdn1.iconfinder.com/data/icons/cc_mono_icon_set/blacks/16x16/br_down.png) no-repeat 100% center;
padding-right: 25px;
}