I got the same issue, and I changed to IP and it working well
Go to System References --> Network --> Advanced --> Open TCP/IP tabs --> copy the IPv4 Address.
change that IP instead localhost
Hope this can help
Use FileSaver.js
. It supports Chrome, Edge, Firefox, and IE 10+ (and probably IE < 10 with a few "polyfills" - see Note 4). FileSaver.js
implements the saveAs() FileSaver interface in browsers that do not natively support it:
https://github.com/eligrey/FileSaver.js
Minified version is really small at < 2.5KB, gzipped < 1.2KB.
Usage:
/* TODO: replace the blob content with your byte[] */
var blob = new Blob([yourBinaryDataAsAnArrayOrAsAString], {type: "application/octet-stream"});
var fileName = "myFileName.myExtension";
saveAs(blob, fileName);
You might need Blob.js in some browsers (see Note 3). Blob.js implements the W3C Blob interface in browsers that do not natively support it. It is a cross-browser implementation:
https://github.com/eligrey/Blob.js
Consider StreamSaver.js if you have files larger than blob's size limitations.
Complete example:
/* Two options_x000D_
* 1. Get FileSaver.js from here_x000D_
* https://github.com/eligrey/FileSaver.js/blob/master/FileSaver.min.js -->_x000D_
* <script src="FileSaver.min.js" />_x000D_
*_x000D_
* Or_x000D_
*_x000D_
* 2. If you want to support only modern browsers like Chrome, Edge, Firefox, etc., _x000D_
* then a simple implementation of saveAs function can be:_x000D_
*/_x000D_
function saveAs(blob, fileName) {_x000D_
var url = window.URL.createObjectURL(blob);_x000D_
_x000D_
var anchorElem = document.createElement("a");_x000D_
anchorElem.style = "display: none";_x000D_
anchorElem.href = url;_x000D_
anchorElem.download = fileName;_x000D_
_x000D_
document.body.appendChild(anchorElem);_x000D_
anchorElem.click();_x000D_
_x000D_
document.body.removeChild(anchorElem);_x000D_
_x000D_
// On Edge, revokeObjectURL should be called only after_x000D_
// a.click() has completed, atleast on EdgeHTML 15.15048_x000D_
setTimeout(function() {_x000D_
window.URL.revokeObjectURL(url);_x000D_
}, 1000);_x000D_
}_x000D_
_x000D_
(function() {_x000D_
// convert base64 string to byte array_x000D_
var byteCharacters = atob("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");_x000D_
var byteNumbers = new Array(byteCharacters.length);_x000D_
for (var i = 0; i < byteCharacters.length; i++) {_x000D_
byteNumbers[i] = byteCharacters.charCodeAt(i);_x000D_
}_x000D_
var byteArray = new Uint8Array(byteNumbers);_x000D_
_x000D_
// now that we have the byte array, construct the blob from it_x000D_
var blob1 = new Blob([byteArray], {type: "application/octet-stream"});_x000D_
_x000D_
var fileName1 = "cool.gif";_x000D_
saveAs(blob1, fileName1);_x000D_
_x000D_
// saving text file_x000D_
var blob2 = new Blob(["cool"], {type: "text/plain"});_x000D_
var fileName2 = "cool.txt";_x000D_
saveAs(blob2, fileName2);_x000D_
})();
_x000D_
Tested on Chrome, Edge, Firefox, and IE 11 (use FileSaver.js
for supporting IE 11).
You can also save from a canvas
element. See https://github.com/eligrey/FileSaver.js#saving-a-canvas.
Demos: https://eligrey.com/demos/FileSaver.js/
Blog post by author of FileSaver.js
: http://eligrey.com/blog/post/saving-generated-files-on-the-client-side
Note 1: Browser support: https://github.com/eligrey/FileSaver.js#supported-browsers
Note 2: Failed to execute 'atob' on 'Window'
Note 3: Polyfill for browsers not supporting Blob: https://github.com/eligrey/Blob.js
See http://caniuse.com/#search=blob
Note 4: IE < 10 support (I've not tested this part):
https://github.com/eligrey/FileSaver.js#ie--10
https://github.com/eligrey/FileSaver.js/issues/56#issuecomment-30917476
Downloadify is a Flash-based polyfill for supporting IE6-9: https://github.com/dcneiner/downloadify (I don't recommend Flash-based solutions in general, though.)
Demo using Downloadify and FileSaver.js for supporting IE6-9 also: http://sheetjs.com/demos/table.html
Note 5: Creating a BLOB from a Base64 string in JavaScript
Note 6: FileSaver.js
examples: https://github.com/eligrey/FileSaver.js#examples
I had the same problem. mysql -u root -p
worked for me. It later asks you for a password. You should then enter the password that you had set for mysql. The default password could be password
, if you did not set one. More info here.
Did you consider using nginx (or other event based web server) instead of apache?
nginx shall allow higher number of connections and consume much less resources (as it is event based and does not create separate process per connection). Anyway, you will need some processes, doing real work (like WSGI servers or so) and if they stay on the same server as the front end web server, you only shift the performance problem to a bit different place.
Latest apache version shall allow similar solution (configure it in event based manner), but this is not my area of expertise.
Warning: Both solutions given ( astype() and apply() ) do not preserve NULL values in either the nan or the None form.
import pandas as pd
import numpy as np
df = pd.DataFrame([None,'string',np.nan,42], index=[0,1,2,3], columns=['A'])
df1 = df['A'].astype(str)
df2 = df['A'].apply(str)
print df.isnull()
print df1.isnull()
print df2.isnull()
I believe this is fixed by the implementation of to_string()
@import url('https://fonts.googleapis.com/css?family=Muli:200,300,400,700&subset=latin-ext');_x000D_
body{ font-family: 'Muli', sans-serif; color:white;}_x000D_
#lists {_x000D_
width: 350px;_x000D_
height: 460px;_x000D_
overflow: hidden;_x000D_
background-color:#222222;_x000D_
padding:0px;_x000D_
float:left;_x000D_
margin: 10px;_x000D_
}_x000D_
_x000D_
.listimg {_x000D_
width: 100%;_x000D_
height: 220px;_x000D_
overflow: hidden;_x000D_
float: left;_x000D_
_x000D_
}_x000D_
#lists .listimg img {_x000D_
width: 350px;_x000D_
height: 220px;_x000D_
-moz-transition: all 0.3s;_x000D_
-webkit-transition: all 0.3s;_x000D_
transition: all 0.3s;_x000D_
}_x000D_
#lists:hover{cursor: pointer;}_x000D_
#lists:hover > .listimg img {_x000D_
-moz-transform: scale(1.3);_x000D_
-webkit-transform: scale(1.3);_x000D_
transform: scale(1.3);_x000D_
-webkit-filter: blur(5px);_x000D_
filter: blur(5px);_x000D_
}_x000D_
_x000D_
#lists h1{margin:20px; display:inline-block; margin-bottom:0px; }_x000D_
#lists p{margin:20px;}_x000D_
_x000D_
.listdetail{ text-align:right; font-weight:200; padding-top:6px;padding-bottom:6px;}
_x000D_
<div id="lists">_x000D_
<div class="listimg">_x000D_
<img src="https://lh3.googleusercontent.com/WeEw5I-wk2UO-y0u3Wsv8MxprCJjxTyTzvwdEc9pcdTsZVj_yK5thdtXNDKoZcUOHlegFhx7=w1920-h914-rw">_x000D_
</div>_x000D_
<div class="listtext">_x000D_
<h1>Eyes Lorem Impsum Samet</h1>_x000D_
<p>Impsum Samet Lorem</p>_x000D_
</div>_x000D_
<div class="listdetail">_x000D_
<p>Click for More Details...</p>_x000D_
</div>_x000D_
</div>_x000D_
_x000D_
<div id="lists">_x000D_
<div class="listimg">_x000D_
<img src="https://lh4.googleusercontent.com/fqK7aQ7auobK_NyXRYCsL9SOpVj6SoYqVlgbOENw6IqQvEWzym_3988798NlkGDzu0MWnR-7nxIhj7g=w1920-h870-rw">_x000D_
</div>_x000D_
<div class="listtext">_x000D_
<h1>Two Frogs Lorem Impsum Samet</h1>_x000D_
<p>Impsum Samet Lorem</p>_x000D_
</div>_x000D_
<div class="listdetail">_x000D_
<p>More Details...</p>_x000D_
</div>_x000D_
</div>
_x000D_
If the strings are the same length, then I would go for '%x' % ()
of the built-in xor (^
).
Examples -
>>>a = '290b6e3a'
>>>b = 'd6f491c5'
>>>'%x' % (int(a,16)^int(b,16))
'ffffffff'
>>>c = 'abcd'
>>>d = '12ef'
>>>'%x' % (int(a,16)^int(b,16))
'b922'
If the strings are not the same length, truncate the longer string to the length of the shorter using a slice longer = longer[:len(shorter)]
Enable general query log by the following query in mysql command line
SET GLOBAL general_log = 'ON';
Now open C:/xampp/mysql/data/mysql.log
and check query log
If it fails, open your my.cnf
file. For windows its my.ini
file and enable it there. Just make sure its in the [mysqld]
section
[mysqld]
general_log = 1
Note: In xampp my.ini
file can be either found in xampp\mysql
or in c:\windows
directory
When I had this problem it was because I was trying to use an actual function in place of an anonymous function.
Incorrect:
$(document).on('change', "#MyId", MyFunction());
Correct
$(document).on('change', "#MyId", MyFunction);
or also correct and if you need to pass event object or other params.
$(document).on('change', "#MyId", function(e) { MyFunction(e); });
They serve the actual image inside CSS so there will be less HTTP requests per page.
Alright so after trying every solution out there to solve this exact issues on a wordpress blog, I might have done something either really stupid or genius... With no idea why there's an increase in Mysql connections, I used the php script below in my header to kill all sleeping processes..
So every visitor to my site helps in killing the sleeping processes..
<?php
$result = mysql_query("SHOW processlist");
while ($myrow = mysql_fetch_assoc($result)) {
if ($myrow['Command'] == "Sleep") {
mysql_query("KILL {$myrow['Id']}");}
}
?>
There's a whole bunch of things that can cause this. I'd read through these and try each of them
http://dev.mysql.com/doc/refman/5.1/en/gone-away.html
I've worked for several web hosting companies over the years and generally when I see this, it is the wait_timeout on the server end though this doesn't appear to be the case here.
If you find the solution, I hope you post it. I'd like to know.
I think you want to lowercase the checked value? Try:
var jIsHasKids = $('#chkIsHasKids:checked').val().toLowerCase();
or you want to check it, then get its value as lowercase:
var jIsHasKids = $('#chkIsHasKids').attr("checked", true).val().toLowerCase();
Make sure everything is pushed up to your remote repository (GitHub):
git checkout main
Overwrite "main" with "better_branch":
git reset --hard better_branch
Force the push to your remote repository:
git push -f origin main
When you call setBackgoundColor it overwrites/removes any existing background resource, including any borders, corners, padding, etc. What you want to do is change the color of the existing background resource...
View v;
v.getBackground().setColorFilter(Color.parseColor("#00ff00"), PorterDuff.Mode.DARKEN);
Experiment with PorterDuff.Mode.* for different effects.
Which version of bootstrap are you using? The early versions of Bootstrap 3 (3.0, 3.0.1) didn't work with this functionality.
col-md-offset-0 should be working as seen in this bootstrap example found here (http://getbootstrap.com/css/#grid-responsive-resets):
<div class="row">
<div class="col-sm-5 col-md-6">.col-sm-5 .col-md-6</div>
<div class="col-sm-5 col-sm-offset-2 col-md-6 col-md-offset-0">.col-sm-5 .col-sm-offset-2 .col-md-6 .col-md-offset-0</div>
</div>
You can use xp_dirtree
It takes three parameters:
Path of a Root Directory, Depth up to which you want to get files and folders and the last one is for showing folders only or both folders and files.
EXAMPLE: EXEC xp_dirtree 'C:\', 2, 1
When you want to create interval store promise to variable:
var p = $interval(function() { ... },1000);
And when you want to stop / clear the interval simply use:
$interval.cancel(p);
To install the Jupyterthemes package directly with conda, use:
conda install -c conda-forge jupyterthemes
Then, as others have pointed out, change the theme with jt -t <theme-name>
You can access user data directly in the twig template without requesting anything in the controller. The user is accessible like that : app.user
.
Now, you can access every property of the user. For example, you can access the username like that : app.user.username
.
Warning, if the user is not logged, the app.user
is null.
If you want to check if the user is logged, you can use the is_granted
twig function. For example, if you want to check if the user has ROLE_ADMIN
, you just have to do is_granted("ROLE_ADMIN")
.
So, in every of your pages you can do :
{% if is_granted("ROLE") %}
Hi {{ app.user.username }}
{% endif %}
Be careful with jobs
1 - if you have a job based in maven, Jenkins takes your default java configuration and you decide the compilation level in your POM.XML.
2 - if you have a free style job, in the the configuration option of the job you can select the JDK that you want to use.
Hope this help.
You can use sort of Maybe monad (though I'd prefer Jay's answer)
public class Maybe<T>
{
private readonly T _value;
public Maybe(T value)
{
_value = value;
IsNothing = false;
}
public Maybe()
{
IsNothing = true;
}
public bool IsNothing { get; private set; }
public T Value
{
get
{
if (IsNothing)
{
throw new InvalidOperationException("Value doesn't exist");
}
return _value;
}
}
public override bool Equals(object other)
{
if (IsNothing)
{
return (other == null);
}
if (other == null)
{
return false;
}
return _value.Equals(other);
}
public override int GetHashCode()
{
if (IsNothing)
{
return 0;
}
return _value.GetHashCode();
}
public override string ToString()
{
if (IsNothing)
{
return "";
}
return _value.ToString();
}
public static implicit operator Maybe<T>(T value)
{
return new Maybe<T>(value);
}
public static explicit operator T(Maybe<T> value)
{
return value.Value;
}
}
Your method would look like:
public static Maybe<T> GetQueryString<T>(string key) where T : IConvertible
{
if (String.IsNullOrEmpty(HttpContext.Current.Request.QueryString[key]) == false)
{
string value = HttpContext.Current.Request.QueryString[key];
try
{
return (T)Convert.ChangeType(value, typeof(T));
}
catch
{
//Could not convert. Pass back default value...
return new Maybe<T>();
}
}
return new Maybe<T>();
}
Niche Answer:
If you have a zfs pool on that device, at least when it's a file-based pool, lsof
will not show the usage. But you can simply run
sudo zpool export mypoo
and then unmount.
This is how I do it if I need a form displayed for each item, and inputs for various properties. Really depends on what I'm trying to do though.
ViewModel looks like this:
public class MyViewModel
{
public List<Person> Persons{get;set;}
}
View(with BeginForm of course):
@model MyViewModel
@for( int i = 0; i < Model.Persons.Count(); ++i)
{
@Html.HiddenFor(m => m.Persons[i].PersonId)
@Html.EditorFor(m => m.Persons[i].FirstName)
@Html.EditorFor(m => m.Persons[i].LastName)
}
Action:
[HttpPost]public ViewResult(MyViewModel vm)
{
...
Note that on post back only properties which had inputs available will have values. I.e., if Person had a .SSN property, it would not be available in the post action because it wasn't a field in the form.
Note that the way MVC's model binding works, it will only look for consecutive ID's. So doing something like this where you conditionally hide an item will cause it to not bind any data after the 5th item, because once it encounters a gap in the IDs, it will stop binding. Even if there were 10 people, you would only get the first 4 on the postback:
@for( int i = 0; i < Model.Persons.Count(); ++i)
{
if(i != 4)//conditionally hide 5th item,
{ //but BUG occurs on postback, all items after 5th will not be bound to the the list
@Html.HiddenFor(m => m.Persons[i].PersonId)
@Html.EditorFor(m => m.Persons[i].FirstName)
@Html.EditorFor(m => m.Persons[i].LastName)
}
}
This answer used to describe how to install Oracle Java 7. This no longer works since Oracle end-of-lifed Java 7 and put the binary downloads for versions with security patches behind a paywall. Also, OpenJDK has grown up and is a more viable alternative nowadays.
In Ubuntu 16.04 and higher, Java 7 is no longer available. Usually you're best off installing Java 8 (or 9) instead.
sudo apt-get install openjdk-8-jre
or, f you also want the compiler, get the jdk:
sudo apt-get install openjdk-8-jdk
In Trusty, the easiest way to install Java 7 currently is to install OpenJDK package:
sudo apt-get install openjdk-7-jre
or, for the jdk:
sudo apt-get install openjdk-7-jdk
If you are specifically looking for Java 7 on a version of Ubuntu that no longer supports it, see https://askubuntu.com/questions/761127/how-do-i-install-openjdk-7-on-ubuntu-16-04-or-higher .
This has been a long-standing complaint with Java, but it's largely meaningless, and usually based on looking at the wrong information. The usual phrasing is something like "Hello World on Java takes 10 megabytes! Why does it need that?" Well, here's a way to make Hello World on a 64-bit JVM claim to take over 4 gigabytes ... at least by one form of measurement.
java -Xms1024m -Xmx4096m com.example.Hello
On Linux, the top command gives you several different numbers for memory. Here's what it says about the Hello World example:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2120 kgregory 20 0 4373m 15m 7152 S 0 0.2 0:00.10 java
The situation for Windows Task Manager is a bit more complicated. Under Windows XP, there are "Memory Usage" and "Virtual Memory Size" columns, but the official documentation is silent on what they mean. Windows Vista and Windows 7 add more columns, and they're actually documented. Of these, the "Working Set" measurement is the most useful; it roughly corresponds to the sum of RES and SHR on Linux.
The virtual memory consumed by a process is the total of everything that's in the process memory map. This includes data (eg, the Java heap), but also all of the shared libraries and memory-mapped files used by the program. On Linux, you can use the pmap command to see all of the things mapped into the process space (from here on out I'm only going to refer to Linux, because it's what I use; I'm sure there are equivalent tools for Windows). Here's an excerpt from the memory map of the "Hello World" program; the entire memory map is over 100 lines long, and it's not unusual to have a thousand-line list.
0000000040000000 36K r-x-- /usr/local/java/jdk-1.6-x64/bin/java 0000000040108000 8K rwx-- /usr/local/java/jdk-1.6-x64/bin/java 0000000040eba000 676K rwx-- [ anon ] 00000006fae00000 21248K rwx-- [ anon ] 00000006fc2c0000 62720K rwx-- [ anon ] 0000000700000000 699072K rwx-- [ anon ] 000000072aab0000 2097152K rwx-- [ anon ] 00000007aaab0000 349504K rwx-- [ anon ] 00000007c0000000 1048576K rwx-- [ anon ] ... 00007fa1ed00d000 1652K r-xs- /usr/local/java/jdk-1.6-x64/jre/lib/rt.jar ... 00007fa1ed1d3000 1024K rwx-- [ anon ] 00007fa1ed2d3000 4K ----- [ anon ] 00007fa1ed2d4000 1024K rwx-- [ anon ] 00007fa1ed3d4000 4K ----- [ anon ] ... 00007fa1f20d3000 164K r-x-- /usr/local/java/jdk-1.6-x64/jre/lib/amd64/libjava.so 00007fa1f20fc000 1020K ----- /usr/local/java/jdk-1.6-x64/jre/lib/amd64/libjava.so 00007fa1f21fb000 28K rwx-- /usr/local/java/jdk-1.6-x64/jre/lib/amd64/libjava.so ... 00007fa1f34aa000 1576K r-x-- /lib/x86_64-linux-gnu/libc-2.13.so 00007fa1f3634000 2044K ----- /lib/x86_64-linux-gnu/libc-2.13.so 00007fa1f3833000 16K r-x-- /lib/x86_64-linux-gnu/libc-2.13.so 00007fa1f3837000 4K rwx-- /lib/x86_64-linux-gnu/libc-2.13.so ...
A quick explanation of the format: each row starts with the virtual memory address of the segment. This is followed by the segment size, permissions, and the source of the segment. This last item is either a file or "anon", which indicates a block of memory allocated via mmap.
Starting from the top, we have
java
). This is very small; all it does is load in the shared libraries where the real JVM code is stored.-Xmx
value; this allows it to have a contiguous heap. The -Xms
value is used internally to say how much of the heap is "in use" when the program starts, and to trigger garbage collection as that limit is approached.StackOverFlowError
. For a real app, you will see dozens if not hundreds of these entries repeated through the memory map.The shared libraries are particularly interesting: each shared library has at least two segments: a read-only segment containing the library code, and a read-write segment that contains global per-process data for the library (I don't know what the segment with no permissions is; I've only seen it on x64 Linux). The read-only portion of the library can be shared between all processes that use the library; for example, libc
has 1.5M of virtual memory space that can be shared.
The virtual memory map contains a lot of stuff. Some of it is read-only, some of it is shared, and some of it is allocated but never touched (eg, almost all of the 4Gb of heap in this example). But the operating system is smart enough to only load what it needs, so the virtual memory size is largely irrelevant.
Where virtual memory size is important is if you're running on a 32-bit operating system, where you can only allocate 2Gb (or, in some cases, 3Gb) of process address space. In that case you're dealing with a scarce resource, and might have to make tradeoffs, such as reducing your heap size in order to memory-map a large file or create lots of threads.
But, given that 64-bit machines are ubiquitous, I don't think it will be long before Virtual Memory Size is a completely irrelevant statistic.
Resident Set size is that portion of the virtual memory space that is actually in RAM. If your RSS grows to be a significant portion of your total physical memory, it might be time to start worrying. If your RSS grows to take up all your physical memory, and your system starts swapping, it's well past time to start worrying.
But RSS is also misleading, especially on a lightly loaded machine. The operating system doesn't expend a lot of effort to reclaiming the pages used by a process. There's little benefit to be gained by doing so, and the potential for an expensive page fault if the process touches the page in the future. As a result, the RSS statistic may include lots of pages that aren't in active use.
Unless you're swapping, don't get overly concerned about what the various memory statistics are telling you. With the caveat that an ever-growing RSS may indicate some sort of memory leak.
With a Java program, it's far more important to pay attention to what's happening in the heap. The total amount of space consumed is important, and there are some steps that you can take to reduce that. More important is the amount of time that you spend in garbage collection, and which parts of the heap are getting collected.
Accessing the disk (ie, a database) is expensive, and memory is cheap. If you can trade one for the other, do so.
Angular RC5 & RC6
If you are getting the above mentioned error in your Jasmine tests, it is most likely because you have to declare the unrenderable component in your TestBed.configureTestingModule({})
.
The TestBed configures and initializes an environment for unit testing and provides methods for mocking/creating/injecting components and services in unit tests.
If you don't declare the component before your unit tests are executed, Angular will not know what <courses></courses>
is in your template file.
Here is an example:
import {async, ComponentFixture, TestBed} from "@angular/core/testing";
import {AppComponent} from "../app.component";
import {CoursesComponent} from './courses.component';
describe('CoursesComponent', () => {
let component: CoursesComponent;
let fixture: ComponentFixture<CoursesComponent>;
beforeEach(async(() => {
TestBed.configureTestingModule({
declarations: [
AppComponent,
CoursesComponent
],
imports: [
BrowserModule
// If you have any other imports add them here
]
})
.compileComponents();
}));
beforeEach(() => {
fixture = TestBed.createComponent(CoursesComponent);
component = fixture.componentInstance;
fixture.detectChanges();
});
it('should create', () => {
expect(component).toBeTruthy();
});
});
import sqlite3
db = sqlite3.connect('mydatabase.db')
cursor = db.execute('SELECT * FROM students ORDER BY CREATE_AT')
studentList = cursor.fetchall()
columnNames = list(map(lambda x: x[0], cursor.description)) #students table column names list
studentsAssoc = {} #Assoc format is dictionary similarly
#THIS IS ASSOC PROCESS
for lineNumber, student in enumerate(studentList):
studentsAssoc[lineNumber] = {}
for columnNumber, value in enumerate(student):
studentsAssoc[lineNumber][columnNames[columnNumber]] = value
print(studentsAssoc)
The result is definitely true, but I do not know the best.
As apps run in the background anyway. I’m assuming what your really asking is how do you make apps do stuff in the background. The solution below will make your app do stuff in the background after opening the app and after the system has rebooted.
Below, I’ve added a link to a fully working example (in the form of an Android Studio Project)
This subject seems to be out of the scope of the Android docs, and there doesn’t seem to be any one comprehensive doc on this. The information is spread across a few docs.
The following docs tell you indirectly how to do this: https://developer.android.com/reference/android/app/Service.html
https://developer.android.com/reference/android/content/BroadcastReceiver.html
https://developer.android.com/guide/components/bound-services.html
In the interests of getting your usage requirements correct, the important part of this above doc to read carefully is: #Binder, #Messenger and the components link below:
https://developer.android.com/guide/components/aidl.html
Here is the link to a fully working example (in Android Studio format): http://developersfound.com/BackgroundServiceDemo.zip
This project will start an Activity which binds to a service; implementing the AIDL.
This project is also useful to re-factor for the purpose of IPC across different apps.
This project is also developed to start automatically when Android restarts (provided the app has been run at least one after installation and app is not installed on SD card)
When this app/project runs after reboot, it dynamically uses a transparent view to make it look like no app has started but the service of the associated app starts cleanly.
This code is written in such a way that it’s very easy to tweak to simulate a scheduled service.
This project is developed in accordance to the above docs and is subsequently a clean solution.
There is however a part of this project which is not clean being: I have not found a way to start a service on reboot without using an Activity. If any of you guys reading this post have a clean way to do this please post a comment.
If you need an empty folder you can loop until you get an empty folder
QString folder= QString ("%1").arg(QDateTime::currentMSecsSinceEpoch());
while(QDir(folder).exists())
{
folder= QString ("%1").arg(QDateTime::currentMSecsSinceEpoch());
}
QDir().mkdir(folder);
This case you will get a folder name with a number .
Tomcat is an application container that is also a web server. An application container can run web-applications (have "application" scope). It is not considered Some people do not consider it a full application server as it is lacking in some aspects such as user management and the like, but getting better all the time..
One of the Related posts gave me the (simple) answer.
Apparently the auto
value on the grid-template-rows
property does exactly what I was looking for.
.grid {
display:grid;
grid-template-columns: 1fr 1.5fr 1fr;
grid-template-rows: auto auto 1fr 1fr 1fr auto auto;
grid-gap:10px;
height: calc(100vh - 10px);
}
This line
mnuActionLanguage.ComboBox.DisplayMember = "Lang.Language";
is wrong. Change it to
mnuActionLanguage.ComboBox.DisplayMember = "Language";
and it will work (even without DataBind()).
At CMD
prompt:
>ver
Microsoft Windows [Version 10.0.18362.476]
>dir \\.\pipe\\
function getURLParameter(name) {
return decodeURIComponent((new RegExp('[?|&]' + name + '=' + '([^&;]+?)(&|#|;|$)').exec(location.search) || [null, ''])[1].replace(/\+/g, '%20')) || null;
}
So you can use:
myvar = getURLParameter('myvar');
For passing both a function, and any arguments to the function:
from typing import Callable
def looper(fn: Callable, n:int, *args, **kwargs):
"""
Call a function `n` times
Parameters
----------
fn: Callable
Function to be called.
n: int
Number of times to call `func`.
*args
Positional arguments to be passed to `func`.
**kwargs
Keyword arguments to be passed to `func`.
Example
-------
>>> def foo(a:Union[float, int], b:Union[float, int]):
... '''The function to pass'''
... print(a+b)
>>> looper(foo, 3, 2, b=4)
6
6
6
"""
for i in range(n):
fn(*args, **kwargs)
Depending on what you are doing, it could make sense to define a decorator
, or perhaps use functools.partial
.
jsonVariable = {}
for(i=1; i<3; i++) {
var jsonKey = i+'name';
jsonVariable[jsonKey] = 'name1'
}
this will be similar to
jsonVariable = {
1name : 'name1'
2name : 'name1'
}
I tried to accomplish this using Class component: you can view the message for the same
.....
class Checkbox extends React.Component{
constructor(props){
super(props)
this.state={
checked:true
}
this.handleCheck=this.handleCheck.bind(this)
}
handleCheck(){
this.setState({
checked:!this.state.checked
})
}
render(){
var msg=" "
if(this.state.checked){
msg="checked!"
}else{
msg="not checked!"
}
return(
<div>
<input type="checkbox"
onChange={this.handleCheck}
defaultChecked={this.state.checked}
/>
<p>this box is {msg}</p>
</div>
)
}
}
just use preload="none"
in your video tag and video will stop autoplay when the page is loading.
Something like this should do it :
UPDATE table1
SET table1.Price = table2.price
FROM table1 INNER JOIN table2 ON table1.id = table2.id
You can also try this:
UPDATE table1
SET price=(SELECT price FROM table2 WHERE table1.id=table2.id);
It doesn't. There's a vague equivalent:
mycol VARCHAR(10) NOT NULL CHECK (mycol IN('Useful', 'Useless', 'Unknown'))
In nano 2.2.6 the line in ~/.nanorc to do this seems to be
set tabsize 4
Setting tabspace gave me the error: 'Unknown flag "tabspace"'
In addition to testing using the "is" operator, you can decorate your methods to make sure that variables passed to it implement a particular interface, like so:
public static void BubbleSort<T>(ref IList<T> unsorted_list) where T : IComparable
{
//Some bubbly sorting
}
I'm not sure which version of .Net this was implemented in so it may not work in your version.
try this, it works for me.
date_default_timezone_set('America/New_York');
In the actual file that was complaining.
You can do in this way:
int[] numbers= {1,3,4,9,2};
List<int> lst_numbers = new List<int>(numbers);
int required_number = 4;
int i = 0;
foreach (int number in lst_numbers)
{
if(number == required_number)
{
break;
}
i++;
}
lst_numbers.RemoveAt(i);
numbers = lst_numbers.ToArray();
I decided to download the assigned port numbers from IANA, filter out the used ports, and sort each "Unassigned" range in order of most ports available, descending. This did not work, since the csv file has ranges marked as "Unassigned" that overlap other port number reservations. I manually expanded the ranges of assigned port numbers, leaving me with a list of all assigned port numbers. I then sorted that list and generated my own list of unassigned ranges.
Since this stackoverflow.com page ranked very high in my search about the topic, I figured I'd post the largest ranges here for anyone else who is interested. These are for both TCP and UDP where the number of ports in the range is at least 500.
Total Start End
829 29170 29998
815 38866 39680
710 41798 42507
681 43442 44122
661 46337 46997
643 35358 36000
609 36866 37474
596 38204 38799
592 33657 34248
571 30261 30831
563 41231 41793
542 21011 21552
528 28590 29117
521 14415 14935
510 26490 26999
Source (via the CSV download button):
http://www.iana.org/assignments/service-names-port-numbers/service-names-port-numbers.xhtml
The HTML4 spec for the <input>
element specifies the following script events are available:
onfocus, onblur, onselect, onchange, onclick, ondblclick, onmousedown, onmouseup, onmouseover, onmousemove, onmouseout, onkeypress, onkeydown, onkeyup
here's an example that bind's to all these events and shows what's going on http://jsfiddle.net/pxfunc/zJ7Lf/
I think you can filter out which events are truly relevent to your situation and detect what the text value was before and after the event to determine a change
The %history
command is awesome, but unfortunately it won't let you save things that were %paste 'd into the sesh. To do that I think you have to do %logstart
at the beginning (although I haven't confirmed this works).
What I like to do is
%history -o -n -p -f filename.txt
which will save the output, line numbers, and '>>>' before each input (o, n, and p options). See the docs for %history here.
If you're using xml.etree.ElementTree.parse
to parse from a file, then you can use xml.etree.ElementTree.fromstring
to parse from text.
First I would recommend you always refer docs before you start a new thing.
We have SchedulerFactory
which schedules Job based on the Cron Expression given to it.
//Create instance of factory
SchedulerFactory schedulerFactory=new StdSchedulerFactory();
//Get schedular
Scheduler scheduler= schedulerFactory.getScheduler();
//Create JobDetail object specifying which Job you want to execute
JobDetail jobDetail=new JobDetail("myJobClass","myJob1",MyJob.class);
//Associate Trigger to the Job
CronTrigger trigger=new CronTrigger("cronTrigger","myJob1","0 0/1 * * * ?");
//Pass JobDetail and trigger dependencies to schedular
scheduler.scheduleJob(jobDetail,trigger);
//Start schedular
scheduler.start();
MyJob.class
public class MyJob implements Job{
@Override
public void execute(JobExecutionContext jobExecutionContext) throws JobExecutionException {
System.out.println("My Logic");
}
}
You have to use bracket notation:
var obj = {};
obj[a[i]] = 0;
x.push(obj);
The result will be:
x = [{left: 0}, {top: 0}];
Maybe instead of an array of objects, you just want one object with two properties:
var x = {};
and
x[a[i]] = 0;
This will result in x = {left: 0, top: 0}
.
here is the example using Pure JavaScript
function scrollpage() { _x000D_
function f() _x000D_
{_x000D_
window.scrollTo(0,i);_x000D_
if(status==0) {_x000D_
i=i+40;_x000D_
if(i>=Height){ status=1; } _x000D_
} else {_x000D_
i=i-40;_x000D_
if(i<=1){ status=0; } // if you don't want continue scroll then remove this line_x000D_
}_x000D_
setTimeout( f, 0.01 );_x000D_
}f();_x000D_
}_x000D_
var Height=document.documentElement.scrollHeight;_x000D_
var i=1,j=Height,status=0;_x000D_
scrollpage();_x000D_
</script>
_x000D_
<style type="text/css">_x000D_
_x000D_
#top { border: 1px solid black; height: 20000px; }_x000D_
#bottom { border: 1px solid red; }_x000D_
_x000D_
</style>
_x000D_
<div id="top">top</div>_x000D_
<div id="bottom">bottom</div>
_x000D_
For shorter JavaScript-Code use this:
myApp.service('userService', [
'$q', function($q) {
this.initialized = $q.when();
this.user = {
access: false
};
this.isAuthenticated = function() {
this.user = {
first_name: 'First',
last_name: 'Last',
email: '[email protected]',
access: 'institution'
};
return this.initialized;
};
}
]);
You know that you loose the binding to userService.user by overwriting it with a new object instead of setting only the objects properties?
Here is what I mean as a example of my plnkr.co example code (Working example: http://plnkr.co/edit/zXVcmRKT1TmiBCDL4GsC?p=preview):
angular.module('myApp', []).service('userService', [
'$http', '$q', '$rootScope', '$location', function ($http, $q, $rootScope, $location) {
this.initialized = $q.when(null);
this.user = {
access: false
};
this.isAuthenticated = function () {
this.user.first_name = 'First';
this.user.last_name = 'Last';
this.user.email = '[email protected]';
this.user.access = 'institution';
return this.initialized;
};
}]);
angular.module('myApp').controller('myCtrl', ['$scope', 'userService', function ($scope, userService) {
$scope.user = userService.user;
$scope.callUserService = function () {
userService.isAuthenticated().then(function () {
$scope.thencalled = true;
});
};
}]);
I find that code gets messy fast when C# code is used to modify CSS values. Perhaps a better approach is for your code to dynamically set the class attribute on the div tag and then store any specific CSS settings in the style sheet.
That might not work for your situation, but its a decent default position if you need to change the style on the fly in server side code.
The default value for client_max_body_size
directive is 1 MiB.
It can be set in http
, server
and location
context — as in the most cases,
this directive in a nested block takes precedence over the same directive in the ancestors blocks.
Excerpt from the ngx_http_core_module documentation:
Syntax: client_max_body_size size; Default: client_max_body_size 1m; Context: http, server, location
Sets the maximum allowed size of the client request body, specified in the “Content-Length” request header field. If the size in a request exceeds the configured value, the 413 (Request Entity Too Large) error is returned to the client. Please be aware that browsers cannot correctly display this error. Setting size to 0 disables checking of client request body size.
Don't forget to reload configuration
by nginx -s reload
or service nginx reload
commands prepending with sudo
(if any).
Try adding a reference to the missing dll's from your service/web project directly. Adding the references to a different project didn't work for me.
I only had to do this when publishing my web app because it wasn't copying all the required dll's.
var server = app.listen();
server.setTimeout(500000);
inspired by https://github.com/expressjs/express/issues/3330
or
app.use(function(req, res, next){
res.setTimeout(500000, function(){
// call back function is called when request timed out.
});
next();
});
Set the listview adapter to "simple_list_item_multiple_choice"
ArrayAdapter<String> adapter;
List<String> values; // put values in this
//Put in listview
adapter = new ArrayAdapter<UserProfile>(
this,
android.R.layout.simple_list_item_multiple_choice,
values);
setListAdapter(adapter);
var myContent = '<div id="test">Hello <span>world!</span></div>';
alert($(myContent).text());
That results in hello world. Does that answer your question?
http://jsfiddle.net/D2tEf/ for an example
If you just need to await
to avoid nesting code:
let json;
await new Promise(done => $.getJSON('https://***', async function (data) {
json = data;
done();
}));
While the current Answer is right in most cases, there are certain situations that it will not give you the correct answer. If you use inside your script functions then:
$MyInvocation.MyCommand.Name
Returns the name of the function instead name of the name of the script.
function test {
$MyInvocation.MyCommand.Name
}
Will give you "test" no matter how your script is named. The right command for getting the script name is always
$MyInvocation.ScriptName
this returns the full path of the script you are executing. If you need just the script filename than this code should help you:
split-path $MyInvocation.PSCommandPath -Leaf
You can use MySQL Table Data Import Wizard
It works for me. Simple variant
public void makeSound(){
File lol = new File("somesound.wav");
try{
Clip clip = AudioSystem.getClip();
clip.open(AudioSystem.getAudioInputStream(lol));
clip.start();
} catch (Exception e){
e.printStackTrace();
}
}
Thank you very much! Finally I solved the blurred pixels problem with this code:
<canvas id="graph" width=326 height=240 style='width:326px;height:240px'></canvas>
With the addition of the 'half-pixel' does the trick to unblur lines.
It will redirects to index.html on localhost:8080 call.
app.get('/',function(req,res){
res.sendFile('index.html', { root: __dirname });
});
Similar as @monkut 's solution but reusable and error tolerant described here http://stamat.wordpress.com/dynamic-module-import-in-python/:
import os
import imp
def importFromURI(uri, absl):
mod = None
if not absl:
uri = os.path.normpath(os.path.join(os.path.dirname(__file__), uri))
path, fname = os.path.split(uri)
mname, ext = os.path.splitext(fname)
if os.path.exists(os.path.join(path,mname)+'.pyc'):
try:
return imp.load_compiled(mname, uri)
except:
pass
if os.path.exists(os.path.join(path,mname)+'.py'):
try:
return imp.load_source(mname, uri)
except:
pass
return mod
From array of objects
function getSum(array, column)
let values = array.map((item) => parseInt(item[column]) || 0)
return values.reduce((a, b) => a + b)
}
foo = [
{ a: 1, b: "" },
{ a: null, b: 2 },
{ a: 1, b: 2 },
{ a: 1, b: 2 },
]
getSum(foo, a) == 3
getSum(foo, b) == 6
In many cases, particularly with text classification it is not enough just to store the classifier but you'll need to store the vectorizer as well so that you can vectorize your input in future.
import pickle
with open('model.pkl', 'wb') as fout:
pickle.dump((vectorizer, clf), fout)
future use case:
with open('model.pkl', 'rb') as fin:
vectorizer, clf = pickle.load(fin)
X_new = vectorizer.transform(new_samples)
X_new_preds = clf.predict(X_new)
Before dumping the vectorizer, one can delete the stop_words_ property of vectorizer by:
vectorizer.stop_words_ = None
to make dumping more efficient. Also if your classifier parameters is sparse (as in most text classification examples) you can convert the parameters from dense to sparse which will make a huge difference in terms of memory consumption, loading and dumping. Sparsify the model by:
clf.sparsify()
Which will automatically work for SGDClassifier but in case you know your model is sparse (lots of zeros in clf.coef_) then you can manually convert clf.coef_ into a csr scipy sparse matrix by:
clf.coef_ = scipy.sparse.csr_matrix(clf.coef_)
and then you can store it more efficiently.
C99 added a bool
type whose semantics are fundamentally different from those of just about all integer types that had existed before in C, including user-defined and compiler-extension types intended for such purposes, and which some programs may have "type-def"ed to bool
.
For example, given bool a = 0.1, b=2, c=255, d=256;
, the C99 bool
type would set all four objects to 1. If a C89 program used typedef unsigned char bool
, the objects would receive 0, 1, 255, and 0, respectively. If it used char
, the values might be as above, or c
might be -1. If it had used a compiler-extension bit
or __bit
type, the results would likely be 0, 0, 1, 0 (treating bit
in a way equivalent to an unsigned bit-field of size 1, or an unsigned integer type with one value bit).
Create a dynamic view and get result from it.......
CREATE PROCEDURE dbo.usp_userwise_columns_value
(
@userid BIGINT
)
AS
BEGIN
DECLARE @maincmd NVARCHAR(max);
DECLARE @columnlist NVARCHAR(max);
DECLARE @columnname VARCHAR(150);
DECLARE @nickname VARCHAR(50);
SET @maincmd = '';
SET @columnname = '';
SET @columnlist = '';
SET @nickname = '';
DECLARE CUR_COLUMNLIST CURSOR FAST_FORWARD
FOR
SELECT columnname , nickname
FROM dbo.v_userwise_columns
WHERE userid = @userid
OPEN CUR_COLUMNLIST
IF @@ERROR <> 0
BEGIN
ROLLBACK
RETURN
END
FETCH NEXT FROM CUR_COLUMNLIST
INTO @columnname, @nickname
WHILE @@FETCH_STATUS = 0
BEGIN
SET @columnlist = @columnlist + @columnname + ','
FETCH NEXT FROM CUR_COLUMNLIST
INTO @columnname, @nickname
END
CLOSE CUR_COLUMNLIST
DEALLOCATE CUR_COLUMNLIST
IF NOT EXISTS (SELECT * FROM sys.views WHERE name = 'v_userwise_columns_value')
BEGIN
SET @maincmd = 'CREATE VIEW dbo.v_userwise_columns_value AS SELECT sjoid, CONVERT(BIGINT, ' + CONVERT(VARCHAR(10), @userid) + ') as userid , '
+ CHAR(39) + @nickname + CHAR(39) + ' as nickname, '
+ @columnlist + ' compcode FROM dbo.SJOTran '
END
ELSE
BEGIN
SET @maincmd = 'ALTER VIEW dbo.v_userwise_columns_value AS SELECT sjoid, CONVERT(BIGINT, ' + CONVERT(VARCHAR(10), @userid) + ') as userid , '
+ CHAR(39) + @nickname + CHAR(39) + ' as nickname, '
+ @columnlist + ' compcode FROM dbo.SJOTran '
END
--PRINT @maincmd
EXECUTE sp_executesql @maincmd
END
-----------------------------------------------
SELECT * FROM dbo.v_userwise_columns_value
jQuery.ajax({
type: 'GET',
url: "../struktur2/load.php",
async: false,
contentType: "application/json",
dataType: 'json',
success: function(json) {
items = json;
},
error: function(e) {
console.log("jQuery error message = "+e.message);
}
});
You probably want to check the length of the string first and do something like this:
if (!myStr.empty())
{
char lastChar = *myStr.rbegin();
}
valid json string must have double quote.
JSON.parse({"u1":1000,"u2":1100}) // will be ok
no quote cause error
JSON.parse({u1:1000,u2:1100})
// error Uncaught SyntaxError: Unexpected token u in JSON at position 2
single quote cause error
JSON.parse({'u1':1000,'u2':1100})
// error Uncaught SyntaxError: Unexpected token u in JSON at position 2
You must valid json string at https://jsonlint.com
If you want to do this in RegexBuddy, there are two ways to get a list of all lines not matching a regex.
On the toolbar on the Test panel, set the test scope to "Line by line". When you do that, an item List All Lines without Matches will appear under the List All button on the same toolbar. (If you don't see the List All button, click the Match button in the main toolbar.)
On the GREP panel, you can turn on the "line-based" and the "invert results" checkboxes to get a list of non-matching lines in the files you're grepping through.
That looks fine, unless you want to pass it as Model string
public class HomeController : Controller
{
public ActionResult Index()
{
string model = "<HTML></HTML>";
return View(model);
}
}
@model string
@{
ViewBag.Title = "Index";
}
@Html.Raw(Model)
This only works if you control both the outside page and the iframe page.
On the outside page, make the iframe
unscrollable.
<iframe src="" height=200 scrolling=no></iframe>
On the iframe page, add this.
<!doctype html>
...
<style>
html, body {height:100%; overflow:hidden}
body {overflow:auto; -webkit-overflow-scrolling:touch}
</style>
This works because modern browsers uses html
to determine the height, so we just give that a fixed height and turn the body
into a scrollable node.
<input type="text" name="firstname">
<input type="text" name="lastname">
<input type="text" name="email">
<input type="text" name="address">
<input type="text" name="tree[tree1][fruit]">
<input type="text" name="tree[tree1][height]">
<input type="text" name="tree[tree2][fruit]">
<input type="text" name="tree[tree2][height]">
<input type="text" name="tree[tree3][fruit]">
<input type="text" name="tree[tree3][height]">
it should end up like this in the $_POST[] array (PHP format for easy visualization)
$_POST[] = array(
'firstname'=>'value',
'lastname'=>'value',
'email'=>'value',
'address'=>'value',
'tree' => array(
'tree1'=>array(
'fruit'=>'value',
'height'=>'value'
),
'tree2'=>array(
'fruit'=>'value',
'height'=>'value'
),
'tree3'=>array(
'fruit'=>'value',
'height'=>'value'
)
)
)
Older IE and Firefox browsers attach the scrollbar to the documentElement
, or what would be the <html>
tag in HTML.
All other browsers attach the scrollbar to document.body
, or what would be the <body>
tag in HTML.
The correct solution would be to check which one to use, depending on browser
var doc = document.documentElement.clientHeight ? document.documentElement : document.body;
var s = $(doc).scrollTop();
jQuery does make this a little easier, when passing in either window
or document
jQuery's scrollTop
does a similar check and figures it out, so either of these should work cross-browser
var s = $(document).scrollTop();
or
var s = $(window).scrollTop();
Description: Get the current vertical position of the scroll bar for the first element in the set of matched elements or set the vertical position of the scroll bar for every matched element.
...nothing that works for my div, just the full page
If it's for a DIV, you'd have to target the element that has the scrollbar attached, to get the scrolled amount
$('div').scrollTop();
If you need to get the elements distance from the top of the document, you can also do
$('div').offset().top
I found the followig tip helpful, to eliminate this issue in Tomcat -
be sure to load the driver first doing a Class.forName(" org.postgresql.Driver"); in your code.
This is from the post - https://www.postgresql.org/message-id/[email protected]
The jdbc code worked fine as a standalone program but, in TOMCAT it gave the error -'No suitable driver found'
Building off of bbant's answer, this is my complete solution for deserializing JSON from a remote URL.
using Newtonsoft.Json;
using System.Net.Http;
namespace Base
{
public class ApiConsumer<T>
{
public T data;
private string url;
public CalendarApiConsumer(string url)
{
this.url = url;
this.data = getItems();
}
private T getItems()
{
T result = default(T);
HttpClient client = new HttpClient();
// This allows for debugging possible JSON issues
var settings = new JsonSerializerSettings
{
Error = (sender, args) =>
{
if (System.Diagnostics.Debugger.IsAttached)
{
System.Diagnostics.Debugger.Break();
}
}
};
using (HttpResponseMessage response = client.GetAsync(this.url).Result)
{
if (response.IsSuccessStatusCode)
{
result = JsonConvert.DeserializeObject<T>(response.Content.ReadAsStringAsync().Result, settings);
}
}
return result;
}
}
}
Usage would be like:
ApiConsumer<FeedResult> feed = new ApiConsumer<FeedResult>("http://example.info/feeds/feeds.aspx?alt=json-in-script");
Where FeedResult
is the class generated using the Xamasoft JSON Class Generator
Here is a screenshot of the settings I used, allowing for weird property names which the web version could not account for.
If you just don't need anything as your type, you can use void. This can be used for implementing functions, or actions. You could then do something like this:
interface Action<T> {
public T execute();
}
abstract class VoidAction implements Action<Void> {
public Void execute() {
executeInternal();
return null;
}
abstract void executeInternal();
}
Or you could omit the abstract class, and do the return null in every action that doesn't require a return value yourself.
You could then use those actions like this:
Given a method
private static <T> T executeAction(Action<T> action) {
return action.execute();
}
you can call it like
String result = executeAction(new Action<String>() {
@Override
public String execute() {
//code here
return "Return me!";
}
});
or, for the void action (note that you're not assigning the result to anything)
executeAction(new VoidAction() {
@Override
public void executeInternal() {
//code here
}
});
From book :
Choose a Random Row Using an Offset
Still another technique that avoids problems found in the preceding alternatives is to count the rows in the data set and return a random number between 0 and the count. Then use this number as an offset when querying the data set
$rand = "SELECT ROUND(RAND() * (SELECT COUNT(*) FROM Bugs))";
$offset = $pdo->query($rand)->fetch(PDO::FETCH_ASSOC);
$sql = "SELECT * FROM Bugs LIMIT 1 OFFSET :offset";
$stmt = $pdo->prepare($sql);
$stmt->execute( $offset );
$rand_bug = $stmt->fetch();
Use this solution when you can’t assume contiguous key values and you need to make sure each row has an even chance of being selected.
You have quite a few options for this:
1 - If you can find an SVG file for the map you want, you can use something like RaphaelJS or SnapSVG to add click listeners for your states/regions, this solution is the most customizable...
2 - You can use dedicated tools such as clickablemapbuilder (free) or makeaclickablemap (i think free also).
[disclaimer] Im the author of clickablemapbuilder.com :)
I know this is an old thread but I ended up here with the same issue.
I solved it by comparing the dependencies classpath in the build.gradle script(Project) to the installed version.
The error message was pointing to the following folder
C:\Program Files\Android\android-studio3 preview\gradle\m2repository\com\android\tools\build\gradle
It turned out that the alpha2 version was installed but the classpath was still pointing to alpaha1. A simple change to the classpath ('com.android.tools.build:gradle:3.0.0-alpha2') was all that was needed.
This may not help everyone, but I do hope it help most people out.
element: HTMLElement;
constructor() {}
fakeClick(){
this.element = document.getElementById('ButtonX') as HTMLElement;
this.element.click();
}
For those claiming ""
and String.Empty
are interchangeable or that ""
is better, you are very wrong.
Each time you do something like myVariable = ""; you are creating an instance of an object. If Java's String object had an EMPTY public constant, there would only be 1 instance of the object ""
E.g: -
String.EMPTY = ""; //Simply demonstrating. I realize this is invalid syntax
myVar0 = String.EMPTY;
myVar1 = String.EMPTY;
myVar2 = String.EMPTY;
myVar3 = String.EMPTY;
myVar4 = String.EMPTY;
myVar5 = String.EMPTY;
myVar6 = String.EMPTY;
myVar7 = String.EMPTY;
myVar8 = String.EMPTY;
myVar9 = String.EMPTY;
10 (11 including String.EMPTY) Pointers to 1 object
Or: -
myVar0 = "";
myVar1 = "";
myVar2 = "";
myVar3 = "";
myVar4 = "";
myVar5 = "";
myVar6 = "";
myVar7 = "";
myVar8 = "";
myVar9 = "";
10 pointers to 10 objects
This is inefficient and throughout a large application, can be significant.
Perhaps the Java compiler or run-time is efficient enough to automatically point all instances of "" to the same instance, but it might not and takes additional processing to make that determination.
you are confusing the concept of appending and prepending. the following code is prepending:
sys.path.insert(1,'/thePathToYourFolder/')
it places the new information at the beginning (well, second, to be precise) of the search sequence that your interpreter will go through. sys.path.append()
puts things at the very end of the search sequence.
it is advisable that you use something like virtualenv
instead of manually coding your package directories into the PYTHONPATH
everytime. for setting up various ecosystems that separate your site-packages and possible versions of python, read these two blogs:
if you do decide to move down the path to environment isolation you would certainly benefit by looking into virtualenvwrapper: http://www.doughellmann.com/docs/virtualenvwrapper/
best put brackets around foo, and use +=
list+=['foo']
The big thing is either the alias or the other password is wrong. Kindly check your passwords and your issue is solved. Incase you have forgotten password, you can recover it from the androidStuido3.0/System/Log ... Search for the keyword password and their you are saved
from datetime import datetime
startTime = datetime.now()
#do something
#Python 2:
print datetime.now() - startTime
#Python 3:
print(datetime.now() - startTime)
String myFormat= "yyyy-MM-dd";
String finalString = "";
try {
DateFormat formatter = new SimpleDateFormat("yyyy MMM dd");
Date date = (Date) formatter .parse("2015 Oct 09");
SimpleDateFormat newFormat = new SimpleDateFormat(myFormat);
finalString= newFormat .format(date );
newDate.setText(finalString);
} catch (Exception e) {
}
Warning: A component is changing an uncontrolled input of type text to be controlled. Input elements should not switch from uncontrolled to controlled (or vice versa). Decide between using a controlled or uncontrolled input element for the lifetime of the component.
Solution : Check if value is not undefined
React / Formik / Bootstrap / TypeScript
example :
{ values?.purchaseObligation.remainingYear ?
<Input
tag={Field}
name="purchaseObligation.remainingYear"
type="text"
component="input"
/> : null
}
<div class="parent" style="height:500px;">
<div class="child-left floatLeft" style="height:100%">
</div>
<div class="child-right floatLeft" style="height:100%">
</div>
</div>
I used inline style just to give idea.
Probably the easiest way would be use this app Hosts Editor . You need to have root
Looks like a server issue (i.e. a "GitHub" issue).
If you look at this thread, it can happen when the git-http-backend
gets a corrupted heap.(and since they just put in place a smart http support...)
But whatever the actual cause is, it may also be related with recent sporadic disruption in one of the GitHub fileserver.
Do you still see this error message? Because if you do:
Note: the Smart HTTP Support is a big deal for those of us behind an authenticated-based enterprise firewall proxy!
From now on, if you clone a repository over the
http://
url and you are using a Git client version 1.6.6 or greater, Git will automatically use the newer, better transport mechanism.
Even more amazing, however, is that you can now push over that protocol and clone private repositories as well. If you access a private repository, or you are a collaborator and want push access, you can put your username in the URL and Git will prompt you for the password when you try to access it.Older clients will also fall back to the older, less efficient way, so nothing should break - just newer clients should work better.
So again, make sure to upgrade your Git client first.
new[,2]
is a factor, not a numeric vector. Transform it first
new$MY_NEW_COLUMN <-as.numeric(as.character(new[,2])) * 5
If you are finding this question because you have a custom arrow on your select box and the text is going over your arrow, I found a solution that works in some browsers. Just add some padding, to the select
, on the right side.
Before:
After:
CSS:
select {
padding:0 30px 0 10px !important;
-webkit-padding-end: 30px !important;
-webkit-padding-start: 10px !important;
}
iOS ignores the padding
properties but uses the -webkit-
properties instead.
I use php
inside of var.js
file with this .htaccess
.
<Files var.js>
AddType application/x-httpd-php .js
</Files>
Then I write php code in the .js file
<?php
// This is a `.js` file but works with php
echo "var js_variable = '$php_variable';";
When I got the MIME type warning on Chrome, I fixed it by adding a Content-Type
header line in the .js(but php)
file.
<?php
header('Content-Type: application/javascript'); // <- Add this line
// This is a `.js` file but works with php
...
A browser won't execute .js
file because apache sends the Content-Type
header of the file as application/x-httpd-php
that is defined in .htaccess
. That's a security reason. But apache won't execute php as far as htaccess
commands the impersonation, it's necessary. So we need to overwrite apache's Content-Type
header with the php function header()
. I guess that apache stops sending its own header when php sends it instead of apache before.
I just implemented this utility class that removes a char or a group of chars from a String. I think it's fast because doesn't use Regexp. I hope that it helps someone!
package your.package.name;
/**
* Utility class that removes chars from a String.
*
*/
public class RemoveChars {
public static String remove(String string, String remove) {
return new String(remove(string.toCharArray(), remove.toCharArray()));
}
public static char[] remove(final char[] chars, char[] remove) {
int count = 0;
char[] buffer = new char[chars.length];
for (int i = 0; i < chars.length; i++) {
boolean include = true;
for (int j = 0; j < remove.length; j++) {
if ((chars[i] == remove[j])) {
include = false;
break;
}
}
if (include) {
buffer[count++] = chars[i];
}
}
char[] output = new char[count];
System.arraycopy(buffer, 0, output, 0, count);
return output;
}
/**
* For tests!
*/
public static void main(String[] args) {
String string = "THE QUICK BROWN FOX JUMPS OVER THE LAZY DOG";
String remove = "AEIOU";
System.out.println();
System.out.println("Remove AEIOU: " + string);
System.out.println("Result: " + RemoveChars.remove(string, remove));
}
}
This is the output:
Remove AEIOU: THE QUICK BROWN FOX JUMPS OVER THE LAZY DOG
Result: TH QCK BRWN FX JMPS VR TH LZY DG
If using reactive forms, you can also disable the entire form or any sub-set of controls in a FormGroup with myFormGroup.disable()
.
I don't use nested classes much, but I do use them now and then. Especially when I define some kind of data type, and I then want to define a STL functor designed for that data type.
For example, consider a generic Field
class that has an ID number, a type code and a field name. If I want to search a vector
of these Field
s by either ID number or name, I might construct a functor to do so:
class Field
{
public:
unsigned id_;
string name_;
unsigned type_;
class match : public std::unary_function<bool, Field>
{
public:
match(const string& name) : name_(name), has_name_(true) {};
match(unsigned id) : id_(id), has_id_(true) {};
bool operator()(const Field& rhs) const
{
bool ret = true;
if( ret && has_id_ ) ret = id_ == rhs.id_;
if( ret && has_name_ ) ret = name_ == rhs.name_;
return ret;
};
private:
unsigned id_;
bool has_id_;
string name_;
bool has_name_;
};
};
Then code that needs to search for these Field
s can use the match
scoped within the Field
class itself:
vector<Field>::const_iterator it = find_if(fields.begin(), fields.end(), Field::match("FieldName"));
This class does the trick. You can add new prefixes to the _prefixes static string array.
public static class StringExtensions
{
public static string ToProperCase( this string original )
{
if( String.IsNullOrEmpty( original ) )
return original;
string result = _properNameRx.Replace( original.ToLower( CultureInfo.CurrentCulture ), HandleWord );
return result;
}
public static string WordToProperCase( this string word )
{
if( String.IsNullOrEmpty( word ) )
return word;
if( word.Length > 1 )
return Char.ToUpper( word[0], CultureInfo.CurrentCulture ) + word.Substring( 1 );
return word.ToUpper( CultureInfo.CurrentCulture );
}
private static readonly Regex _properNameRx = new Regex( @"\b(\w+)\b" );
private static readonly string[] _prefixes = {
"mc"
};
private static string HandleWord( Match m )
{
string word = m.Groups[1].Value;
foreach( string prefix in _prefixes )
{
if( word.StartsWith( prefix, StringComparison.CurrentCultureIgnoreCase ) )
return prefix.WordToProperCase() + word.Substring( prefix.Length ).WordToProperCase();
}
return word.WordToProperCase();
}
}
In these cases I like a visual that can hopefully explain this:
git reset --[hard/mixed/soft]
:
So each effect different scopes
There is only so much you can do with rm() and gc(). As suggested by Gavin Simpson, even if you free the actual memory in R, Windows often won't reclaim it until you close R or it is needed because all the apparent Windows memory fills up.
This usually isn't a problem. However, if you are running large loops this can sometimes lead to fragmented memory in the long term, such that even if you free the memory and restart R - the fragmented memory may prevent you allocating large chunks of memory. Especially if other applications were allocated fragmented memory while you were running R. rm() and gc() may delay the inevitable, but more RAM is better.
It looks like Java is trying to convert an empty string into a number. Do you have an empty line at the end of the series of numbers?
You could probably fix the code like this
String s = in.readLine();
int i = 0;
while (s != null) {
// Skip empty lines.
s = s.trim();
if (s.length() == 0) {
continue;
}
tall[i] = Integer.parseInt(s); // This is line 19.
System.out.println(tall[i]);
s = in.readLine();
i++;
}
in.close();
For System.Timers.Timer:
See Brian Gideon's answer below
MSDN Documentation on Timers states:
The System.Threading.Timer class makes callbacks on a ThreadPool thread and does not use the event model at all.
So indeed the timer elapses on a different thread.
I know this is old but by far the easier solution is to just use
var temp = new Date("2010-08-17T12:09:36");
Panel
has an AutoScroll
property. Just set that property to True
and the panel will automatically add a scroll bar when needed.
For a complete removal of Xcode 10 delete the following:
/Applications/Xcode.app
~/Library/Caches/com.apple.dt.Xcode
~/Library/Developer
~/Library/MobileDevice
~/Library/Preferences/com.apple.dt.Xcode.plist
/Library/Preferences/com.apple.dt.Xcode.plist
/System/Library/Receipts/com.apple.pkg.XcodeExtensionSupport.bom
/System/Library/Receipts/com.apple.pkg.XcodeExtensionSupport.plist
/System/Library/Receipts/com.apple.pkg.XcodeSystemResources.bom
/System/Library/Receipts/com.apple.pkg.XcodeSystemResources.plist
/private/var/db/receipts/com.apple.pkg.Xcode.bom
But instead of 11, open up /private/var/
in the Finder and search for "Xcode" to see all the 'dna' left behind... and selectively clean that out too. I would post the pathnames but they will include randomized folder names which will not be the same from my Mac to yours.
but if you don't want to lose all of your customizations, consider saving these files or folders before deleting anything:
~/Library/Developer/Xcode/UserData/CodeSnippets
~/Library/Developer/Xcode/UserData/FontAndColorThemes
~/Library/Developer/Xcode/UserData/KeyBindings
~/Library/Developer/Xcode/Templates
~/Library/Preferences/com.apple.dt.Xcode.plist
~/Library/MobileDevice/Provisioning Profiles
You must use one of the following ways:
string s = @"loooooooooooooooooooooooong loooooong
long long long";
string s = "loooooooooong loooong" +
" long long" ;
I know this is an old question, but I wanted to make an answer of my own. here is another way to do this if you "really" want to add to the end of the list instead of using list.add(str)
you can do it this way, but I don't recommend.
String[] items = new String[]{"Hello", "World"};
ArrayList<String> list = new ArrayList<>();
Collections.addAll(list, items);
int endOfList = list.size();
list.add(endOfList, "This goes end of list");
System.out.println(Collections.singletonList(list));
this is the 'Compact' way of adding the item to the end of list. here is a safer way to do this, with null checking and more.
String[] items = new String[]{"Hello", "World"};
ArrayList<String> list = new ArrayList<>();
Collections.addAll(list, items);
addEndOfList(list, "Safer way");
System.out.println(Collections.singletonList(list));
private static void addEndOfList(List<String> list, String item){
try{
list.add(getEndOfList(list), item);
} catch (IndexOutOfBoundsException e){
System.out.println(e.toString());
}
}
private static int getEndOfList(List<String> list){
if(list != null) {
return list.size();
}
return -1;
}
Heres another way to add items to the end of list, happy coding :)
Take your input and make sure it's a string so that it's iterable.
Then perform a list comprehension and change each value back to a number.
Now, you can do the sum of all the numbers if you want:
inp = [int(i) for i in str(input("Enter a number:"))]
print sum(inp)
Or, if you really want to see the output while it's executing:
def printadd(x,y):
print x+y
return x+y
inp = [int(i) for i in str(input("Enter a number:"))]
reduce(printadd,inp)
Simplest is to class-ify all of the divs:
div.rounded {
background: #CFFEB6 url('tr.gif') no-repeat top right;
}
div.rounded div.br {
background: url('br.gif') no-repeat bottom right;
}
div.rounded div.br div.bl {
background: url('bl.gif') no-repeat bottom left;
}
div.rounded div.br div.bl div.inner {
padding: 10px;
}
.button {
border: 1px solid #999;
background:#eeeeee url('');
text-align:center;
}
.button:hover {
background-color:#c4e2f2;
}
And then use:
<div class='round'><div class='br'><div class='bl'><div class='inner'>
<div class='button'><a href='#'>Test</a></div>
</div></div></div></div>
What does return; mean?
return;
really means it returns nothing void
. That's it.
why return; or other codes can write below the statement of System.exit(0);
It is allowed since compiler doesn't know calling System.exit(0)
will terminate the JVM
. The compiler will just give a warning - unnecessary return statement
My issue was that my web.config file kept a reference to a deleted entity model connection so check there are not any outdated connection strings.
SELECT json_agg(t) FROM t
for a JSON array of objects, and
SELECT
json_build_object(
'a', json_agg(t.a),
'b', json_agg(t.b)
)
FROM t
for a JSON object of arrays.
This section describes how to generate a JSON array of objects, with each row being converted to a single object. The result looks like this:
[{"a":1,"b":"value1"},{"a":2,"b":"value2"},{"a":3,"b":"value3"}]
The json_agg
function produces this result out of the box. It automatically figures out how to convert its input into JSON and aggregates it into an array.
SELECT json_agg(t) FROM t
There is no jsonb
(introduced in 9.4) version of json_agg
. You can either aggregate the rows into an array and then convert them:
SELECT to_jsonb(array_agg(t)) FROM t
or combine json_agg
with a cast:
SELECT json_agg(t)::jsonb FROM t
My testing suggests that aggregating them into an array first is a little faster. I suspect that this is because the cast has to parse the entire JSON result.
9.2 does not have the json_agg
or to_json
functions, so you need to use the older array_to_json
:
SELECT array_to_json(array_agg(t)) FROM t
You can optionally include a row_to_json
call in the query:
SELECT array_to_json(array_agg(row_to_json(t))) FROM t
This converts each row to a JSON object, aggregates the JSON objects as an array, and then converts the array to a JSON array.
I wasn't able to discern any significant performance difference between the two.
This section describes how to generate a JSON object, with each key being a column in the table and each value being an array of the values of the column. It's the result that looks like this:
{"a":[1,2,3], "b":["value1","value2","value3"]}
We can leverage the json_build_object
function:
SELECT
json_build_object(
'a', json_agg(t.a),
'b', json_agg(t.b)
)
FROM t
You can also aggregate the columns, creating a single row, and then convert that into an object:
SELECT to_json(r)
FROM (
SELECT
json_agg(t.a) AS a,
json_agg(t.b) AS b
FROM t
) r
Note that aliasing the arrays is absolutely required to ensure that the object has the desired names.
Which one is clearer is a matter of opinion. If using the json_build_object
function, I highly recommend putting one key/value pair on a line to improve readability.
You could also use array_agg
in place of json_agg
, but my testing indicates that json_agg
is slightly faster.
There is no jsonb
version of the json_build_object
function. You can aggregate into a single row and convert:
SELECT to_jsonb(r)
FROM (
SELECT
array_agg(t.a) AS a,
array_agg(t.b) AS b
FROM t
) r
Unlike the other queries for this kind of result, array_agg
seems to be a little faster when using to_jsonb
. I suspect this is due to overhead parsing and validating the JSON result of json_agg
.
Or you can use an explicit cast:
SELECT
json_build_object(
'a', json_agg(t.a),
'b', json_agg(t.b)
)::jsonb
FROM t
The to_jsonb
version allows you to avoid the cast and is faster, according to my testing; again, I suspect this is due to overhead of parsing and validating the result.
The json_build_object
function was new to 9.5, so you have to aggregate and convert to an object in previous versions:
SELECT to_json(r)
FROM (
SELECT
json_agg(t.a) AS a,
json_agg(t.b) AS b
FROM t
) r
or
SELECT to_jsonb(r)
FROM (
SELECT
array_agg(t.a) AS a,
array_agg(t.b) AS b
FROM t
) r
depending on whether you want json
or jsonb
.
(9.3 does not have jsonb
.)
In 9.2, not even to_json
exists. You must use row_to_json
:
SELECT row_to_json(r)
FROM (
SELECT
array_agg(t.a) AS a,
array_agg(t.b) AS b
FROM t
) r
Find the documentation for the JSON functions in JSON functions.
json_agg
is on the aggregate functions page.
If performance is important, ensure you benchmark your queries against your own schema and data, rather than trust my testing.
Whether it's a good design or not really depends on your specific application. In terms of maintainability, I don't see any particular problem. It simplifies your app code and means there's less to maintain in that portion of the app. If PG can give you exactly the result you need out of the box, the only reason I can think of to not use it would be performance considerations. Don't reinvent the wheel and all.
Aggregate functions typically give back NULL
when they operate over zero rows. If this is a possibility, you might want to use COALESCE
to avoid them. A couple of examples:
SELECT COALESCE(json_agg(t), '[]'::json) FROM t
Or
SELECT to_jsonb(COALESCE(array_agg(t), ARRAY[]::t[])) FROM t
Credit to Hannes Landeholm for pointing this out
I ran into this issue. A hack workaround is importing via an if/else block like follows:
#!/usr/bin/env python3
#myothermodule
if __name__ == '__main__':
from mymodule import as_int
else:
from .mymodule import as_int
# Exported function
def add(a, b):
return as_int(a) + as_int(b)
# Test function for module
def _test():
assert add('1', '1') == 2
if __name__ == '__main__':
_test()
If Facing the same issue as mine i.e. not on the virtual environment and wants requirements.txt for a specific project or from the selected folder(includes children) and pipreqs is not supporting.
You can use :
import os
import sys
from fuzzywuzzy import fuzz
import subprocess
path = "C:/Users/Username/Desktop/DjangoProjects/restAPItest"
files = os.listdir(path)
pyfiles = []
for root, dirs, files in os.walk(path):
for file in files:
if file.endswith('.py'):
pyfiles.append(os.path.join(root, file))
stopWords = ['from', 'import',',','.']
importables = []
for file in pyfiles:
with open(file) as f:
content = f.readlines()
for line in content:
if "import" in line:
for sw in stopWords:
line = ' '.join(line.split(sw))
importables.append(line.strip().split(' ')[0])
importables = set(importables)
subprocess.call(f"pip freeze > {path}/requirements.txt", shell=True)
with open(path+'/requirements.txt') as req:
modules = req.readlines()
modules = {m.split('=')[0].lower() : m for m in modules}
notList = [''.join(i.split('_')) for i in sys.builtin_module_names]+['os']
new_requirements = []
for req_module in importables:
try :
new_requirements.append(modules[req_module])
except KeyError:
for k,v in modules.items():
if len(req_module)>1 and req_module not in notList:
if fuzz.partial_ratio(req_module,k) > 90:
new_requirements.append(modules[k])
new_requirements = [i for i in set(new_requirements)]
new_requirements
with open(path+'/requirements.txt','w') as req:
req.write(''.join(new_requirements))
P.S: It may have a few additional libraries as it checks on fuzzylogic.
Here are two approaches you can read raw resources using Kotlin.
You can get it by getting the resource id. Or, you can use string identifier in which you can programmatically change the filename with incrementation.
Cheers mate
// R.raw.data_post
this.context.resources.openRawResource(R.raw.data_post)
this.context.resources.getIdentifier("data_post", "raw", this.context.packageName)
I agree with "Is Nothing". As stated above, it's easy to negate with "IsNot Nothing".
I find this easier to read...
If printDialog IsNot Nothing Then
'blah
End If
than this...
If Not obj Is Nothing Then
'blah
End If
I was frustrated trying to connect my Android App to my RESTful service using https. Also I was a bit annoyed about all the answers that suggested to disable certificate checking altogether. If you do so, whats the point of https?
After googled about the topic for a while, I finally found this solution where external jars are not needed, just Android APIs. Thanks to Andrew Smith, who posted it on July, 2014
/**
* Set up a connection to myservice.domain using HTTPS. An entire function
* is needed to do this because myservice.domain has a self-signed certificate.
*
* The caller of the function would do something like:
* HttpsURLConnection urlConnection = setUpHttpsConnection("https://littlesvr.ca");
* InputStream in = urlConnection.getInputStream();
* And read from that "in" as usual in Java
*
* Based on code from:
* https://developer.android.com/training/articles/security-ssl.html#SelfSigned
*/
public static HttpsURLConnection setUpHttpsConnection(String urlString)
{
try
{
// Load CAs from an InputStream
// (could be from a resource or ByteArrayInputStream or ...)
CertificateFactory cf = CertificateFactory.getInstance("X.509");
// My CRT file that I put in the assets folder
// I got this file by following these steps:
// * Go to https://littlesvr.ca using Firefox
// * Click the padlock/More/Security/View Certificate/Details/Export
// * Saved the file as littlesvr.crt (type X.509 Certificate (PEM))
// The MainActivity.context is declared as:
// public static Context context;
// And initialized in MainActivity.onCreate() as:
// MainActivity.context = getApplicationContext();
InputStream caInput = new BufferedInputStream(MainActivity.context.getAssets().open("littlesvr.crt"));
Certificate ca = cf.generateCertificate(caInput);
System.out.println("ca=" + ((X509Certificate) ca).getSubjectDN());
// Create a KeyStore containing our trusted CAs
String keyStoreType = KeyStore.getDefaultType();
KeyStore keyStore = KeyStore.getInstance(keyStoreType);
keyStore.load(null, null);
keyStore.setCertificateEntry("ca", ca);
// Create a TrustManager that trusts the CAs in our KeyStore
String tmfAlgorithm = TrustManagerFactory.getDefaultAlgorithm();
TrustManagerFactory tmf = TrustManagerFactory.getInstance(tmfAlgorithm);
tmf.init(keyStore);
// Create an SSLContext that uses our TrustManager
SSLContext context = SSLContext.getInstance("TLS");
context.init(null, tmf.getTrustManagers(), null);
// Tell the URLConnection to use a SocketFactory from our SSLContext
URL url = new URL(urlString);
HttpsURLConnection urlConnection = (HttpsURLConnection)url.openConnection();
urlConnection.setSSLSocketFactory(context.getSocketFactory());
return urlConnection;
}
catch (Exception ex)
{
Log.e(TAG, "Failed to establish SSL connection to server: " + ex.toString());
return null;
}
}
It worked nice for my mockup App.
your folder name is scripts..
and you are Referencing it like ../script/login.js
Also make sure that script folder is in your project directory
Thanks
That should do the trick :
byte[] bytes = toByteArray(Str.toCharArray());
public static byte[] toByteArray(char[] array) {
return toByteArray(array, Charset.defaultCharset());
}
public static byte[] toByteArray(char[] array, Charset charset) {
CharBuffer cbuf = CharBuffer.wrap(array);
ByteBuffer bbuf = charset.encode(cbuf);
return bbuf.array();
}
Surely:
if (useAdditionalClauses)
{
results =
results.Where(o => o.OrderStatus == OrderStatus.Open &&
o.CustomerID == customerID)
}
Or just another .Where()
call like this one (although I don't know why you would want to, unless it's split by another boolean control variable):
if (useAdditionalClauses)
{
results = results.Where(o => o.OrderStatus == OrderStatus.Open).
Where(o => o.CustomerID == customerID);
}
Or another reassignment to results
: `results = results.Where(blah).
If you Want to copy Same DataBase
Select * INTO NewTableName from OldTableName
If Another DataBase
Select * INTO NewTableName from DatabaseName.OldTableName
For each error of the form:
npm WARN {something} requires a peer of {other thing} but none is installed. You must install peer dependencies yourself.
You should:
$ npm install --save-dev "{other thing}"
Note: The quotes are needed if the {other thing}
has spaces, like in this example:
npm WARN [email protected] requires a peer of rollup@>=0.66.0 <2 but none was installed.
Resolved with:
$ npm install --save-dev "rollup@>=0.66.0 <2"
Have a look at java.io.File.list()
and FilenameFilter
.
Because the join()
method is in the string class, instead of the list class?
I agree it looks funny.
See http://www.faqs.org/docs/diveintopython/odbchelper_join.html:
Historical note. When I first learned Python, I expected join to be a method of a list, which would take the delimiter as an argument. Lots of people feel the same way, and there’s a story behind the join method. Prior to Python 1.6, strings didn’t have all these useful methods. There was a separate string module which contained all the string functions; each function took a string as its first argument. The functions were deemed important enough to put onto the strings themselves, which made sense for functions like lower, upper, and split. But many hard-core Python programmers objected to the new join method, arguing that it should be a method of the list instead, or that it shouldn’t move at all but simply stay a part of the old string module (which still has lots of useful stuff in it). I use the new join method exclusively, but you will see code written either way, and if it really bothers you, you can use the old string.join function instead.
--- Mark Pilgrim, Dive into Python
If you want to exit your application from direct Second Activity without going to First Activity then try this code..`
In Second Activity put this code..
@Override
public void onBackPressed() {
new AlertDialog.Builder(this)
.setTitle("Really Exit?")
.setMessage("Are you sure you want to exit?")
.setNegativeButton(android.R.string.no, null)
.setPositiveButton(android.R.string.yes, new DialogInterface.OnClickListener() {
public void onClick(DialogInterface arg0, int arg1) {
setResult(RESULT_OK, new Intent().putExtra("EXIT", true));
finish();
}
}).create().show();
}
And Your First Activity Put this code.....
public class FirstActivity extends AppCompatActivity {
Button next;
private final static int EXIT_CODE = 100;
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_main);
next = (Button) findViewById(R.id.next);
next.setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View view) {
startActivityForResult(new Intent(FirstActivity.this, SecondActivity.class), EXIT_CODE);
}
});
}
@Override
protected void onActivityResult(int requestCode, int resultCode, Intent data) {
if (requestCode == EXIT_CODE) {
if (resultCode == RESULT_OK) {
if (data.getBooleanExtra("EXIT", true)) {
finish();
}
}
}
}
}
{ text-decoration: none !important}
EDIT 1:
For you example only a{text-decoration: none}
will works
You can use a class not to interfere with the default behaviour of <a>
tags.
<a href="#" class="nounderline">
<div class="btn-group">
<button class="btn">Text</button>
<button class="btn">Text</button>
</div>
</a>
CSS:
.nounderline {
text-decoration: none !important
}
JAR files allow to package multiple files in order to use it as a library, plugin, or any kind of application. On the other hand, WAR files are used only for web applications.
JAR can be created with any desired structure. In contrast, WAR has a predefined structure with WEB-INF and META-INF directories.
A JAR file allows Java Runtime Environment (JRE) to deploy an entire application including the classes and the associated resources in a single request. On the other hand, a WAR file allows testing and deploying a web application easily.
You need to use a graphics library. Put this in your preamble:
\usepackage{graphicx}
You can then add images like this:
\begin{figure}[ht!]
\centering
\includegraphics[width=90mm]{fixed_dome1.jpg}
\caption{A simple caption \label{overflow}}
\end{figure}
This is the basic template I use in my documents. The position and size should be tweaked for your needs. Refer to the guide below for more information on what parameters to use in \figure
and \includegraphics
. You can then refer to the image in your text using the label you gave in the figure:
And here we see figure \ref{overflow}.
Read this guide here for a more detailed instruction: http://en.wikibooks.org/wiki/LaTeX/Floats,_Figures_and_Captions
If you use git LFS, git count-objects does not count your binaries, but only the pointers to them.
If your LFS files are managed by Artifactorys, you should use the REST API:
GitHub
git config --global url.ssh://[email protected]/.insteadOf https://github.com/
BitBucket
git config --global url.ssh://[email protected]/.insteadOf https://bitbucket.org/
That tells git to always use SSH instead of HTTPS when connecting to GitHub/BitBucket, so you'll authenticate by certificate by default, instead of being prompted for a password.
Here is a simple php script for login and a page that can only be accessed by logged in users.
login.php
<?php
session_start();
echo isset($_SESSION['login']);
if(isset($_SESSION['login'])) {
header('LOCATION:index.php'); die();
}
?>
<!DOCTYPE html>
<html>
<head>
<meta http-equiv='content-type' content='text/html;charset=utf-8' />
<title>Login</title>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css">
</head>
<body>
<div class="container">
<h3 class="text-center">Login</h3>
<?php
if(isset($_POST['submit'])){
$username = $_POST['username']; $password = $_POST['password'];
if($username === 'admin' && $password === 'password'){
$_SESSION['login'] = true; header('LOCATION:admin.php'); die();
} {
echo "<div class='alert alert-danger'>Username and Password do not match.</div>";
}
}
?>
<form action="" method="post">
<div class="form-group">
<label for="username">Username:</label>
<input type="text" class="form-control" id="username" name="username" required>
</div>
<div class="form-group">
<label for="pwd">Password:</label>
<input type="password" class="form-control" id="pwd" name="password" required>
</div>
<button type="submit" name="submit" class="btn btn-default">Login</button>
</form>
</div>
</body>
</html>
admin.php ( only logged in users can access it )
<?php
session_start();
if(!isset($_SESSION['login'])) {
header('LOCATION:login.php'); die();
}
?>
<html>
<head>
<title>Admin Page</title>
</head>
<body>
This is admin page view able only by logged in users.
</body>
</html>
It is most likely a missing cert from the server.
Root->Intermediate->Server
A server should send the Server & Intermediate as a minimum.
Use openssl s_client -showcerts -starttls ftp -crlf -connect abc:21
to debug the issue.
If only one cert is returned (either self signed, or issued), then you must choose to either:
curl -k
(very bad idea)If the server returned, more than one, but not including a self signed (root) cert:
If the server returned a root CA certificate, then it is not in your CA store, your options are:
I have ignored expired / revoked certs because there were no messages indicating it. But you can examine the certs with openssl x509 -text
Given you are connecting to a home edition (https://www.cerberusftp.com/support/help/installing-a-certificate/) ftp server, I am going to say it is self signed.
Please post more details, like the output from openssl.
You can use FindIndex
var index = Array.FindIndex(myArray, row => row.Author == "xyz");
Edit: I see you have an array of string, you can use any code to match, here an example with a simple contains:
var index = Array.FindIndex(myArray, row => row.Contains("Author='xyz'"));
Maybe you need to match using a regular expression?
Let me explain a bit about the one case where you have to use final, which Jon already mentioned:
If you create an anonymous inner class in your method and use a local variable (such as a method parameter) inside that class, then the compiler forces you to make the parameter final:
public Iterator<Integer> createIntegerIterator(final int from, final int to)
{
return new Iterator<Integer>(){
int index = from;
public Integer next()
{
return index++;
}
public boolean hasNext()
{
return index <= to;
}
// remove method omitted
};
}
Here the from
and to
parameters need to be final so they can be used inside the anonymous class.
The reason for that requirement is this: Local variables live on the stack, therefore they exist only while the method is executed. However, the anonymous class instance is returned from the method, so it may live for much longer. You can't preserve the stack, because it is needed for subsequent method calls.
So what Java does instead is to put copies of those local variables as hidden instance variables into the anonymous class (you can see them if you examine the byte code). But if they were not final, one might expect the anonymous class and the method seeing changes the other one makes to the variable. In order to maintain the illusion that there is only one variable rather than two copies, it has to be final.
Check applications connection Pool settings, rather than altering any session timout settings on the oracle db. It's normal that they time out.
Have a look here: http://grails.org/doc/1.0.x/guide/3.%20Configuration.html#3.3%20The%20DataSource
Are you sure that you have set the "pooled" parameter correctly?
Greetings, Lars
EDIT:
Your config seems ok on first glimpse.
I came across this issue today. Maybe it is related to your pain:
"Infinite loop of exceptions if the application is started when the database is down for maintenance"
I know this is old but I came upon this post quickly thinking Concat would be my answer. Union worked great for me. Note, it returns only unique values but knowing that I was getting unique values anyway this solution worked for me.
namespace TestProject
{
public partial class Form1 :Form
{
public Form1()
{
InitializeComponent();
List<string> FirstList = new List<string>();
FirstList.Add("1234");
FirstList.Add("4567");
// In my code, I know I would not have this here but I put it in as a demonstration that it will not be in the secondList twice
FirstList.Add("Three");
List<string> secondList = GetList(FirstList);
foreach (string item in secondList)
Console.WriteLine(item);
}
private List<String> GetList(List<string> SortBy)
{
List<string> list = new List<string>();
list.Add("One");
list.Add("Two");
list.Add("Three");
list = list.Union(SortBy).ToList();
return list;
}
}
}
The output is:
One
Two
Three
1234
4567
If you are using a Ubuntu system, use the following to Store Password Permanently:
git config --global credential.helper store
There is another way to archive it.
In the BaseController
class create a method that returns a Model class like for instance.
public MenuPageModel GetTopMenu() { var m = new MenuPageModel(); // populate your model here return m; }
Layout
page you can call that method GetTopMenu()
@using GJob.Controllers <header class="header-wrapper border-bottom border-secondary"> <div class="sticky-header" id="appTopMenu"> @{ var menuPageModel = ((BaseController)this.ViewContext.Controller).GetTopMenu(); } @Html.Partial("_TopMainMenu", menuPageModel) </div> </header>
I came here in search of a way to get all of the subdirectories, and all of their subdirectories, etc. Building on the accepted answer, I wrote this:
const fs = require('fs');
const path = require('path');
function flatten(lists) {
return lists.reduce((a, b) => a.concat(b), []);
}
function getDirectories(srcpath) {
return fs.readdirSync(srcpath)
.map(file => path.join(srcpath, file))
.filter(path => fs.statSync(path).isDirectory());
}
function getDirectoriesRecursive(srcpath) {
return [srcpath, ...flatten(getDirectories(srcpath).map(getDirectoriesRecursive))];
}
Add "android-support-v7-appcompat.jar" to Android Private Libraries
Here is a modern implementation that accounts for Set
and Map
too:
export function deepClone<T extends object>(value: T): T {
if (typeof value !== 'object' || value === null) {
return value;
}
if (value instanceof Set) {
return new Set(Array.from(value, deepClone)) as T;
}
if (value instanceof Map) {
return new Map(Array.from(value, ([k, v]) => [k, deepClone(v)])) as T;
}
if (value instanceof Date) {
return new Date(value) as T;
}
if (value instanceof RegExp) {
return new RegExp(value.source, value.flags) as T;
}
return Object.keys(value).reduce((acc, key) => {
return Object.assign(acc, { [key]: deepClone(value[key]) });
}, (Array.isArray(value) ? [] : {}) as T);
}
Trying it out:
deepClone({
test1: { '1': 1, '2': {}, '3': [1, 2, 3] },
test2: [1, 2, 3],
test3: new Set([1, 2, [1, 2, 3]]),
test4: new Map([['1', 1], ['2', 2], ['3', 3]])
});
test1:
1: 1
2: {}
3: [1, 2, 3]
test2: Array(3)
0: 1
1: 2
2: 3
test3: Set(3)
0: 1
1: 2
2: [1, 2, 3]
test4: Map(3)
0: {"1" => 1}
1: {"2" => 2}
2: {"3" => 3}
File -> ProjectStructure -> Modules -> +(in central column) -> Spring ->OK
which nginx
will give you the path of the nginx being used
EDIT (2017-Jan-18)
Thanks to Will Palmer's comment on this answer, I have added the following...
If you've installed nginx via a package manager such as HomeBrew...
which nginx
may not give you the EXACT path to the nginx being used. You can however find it using
realpath $(which nginx)
and as mentioned by @Daniel Li
you can get configuration of nginx via his method
alternatively you can use this:
nginx -V
You can Implement this also:- setPage(1, n); where, n = any number.
$products = Mage::getResourceModel('catalog/product_collection')
->addAttributeToSelect('*')
->addAttributeToSelect(array('name', 'price', 'small_image'))
->addFieldToFilter('visibility', Mage_Catalog_Model_Product_Visibility::VISIBILITY_BOTH) //visible only catalog & searchable product
->addAttributeToFilter('status', 1) // enabled
->setStoreId($storeId)
->setOrder('created_at', 'desc')
->setPage(1, 6);
Sorry for the late response, I recently had the same problem with PHP and found out that when working with arrays that do not use $key => $value
structure, when using the foreach
loop you actual copy the value of the position on the loop variable, in this case $image
. Try using this code and it will fix your problem.
for ($i=0; $i < count($images[1]); $i++)
{
if($images[1][$i] == 'http://i27.tinypic.com/29yk345.gif' ||
$images[1][$i] == 'http://img3.abload.de/img/10nx2340fhco.gif' ||
$images[1][$i] == 'http://i42.tinypic.com/9pp2456x.gif')
{
unset($images[1][$i]);
}
}
var_dump($images);die();
Background:
Actually in getComposer website it clearly states that, install the Composer by using the following curl command,
curl -sS https://getcomposer.org/installer |php
And it certainly does what it's intended to do. And then it says to move the composer.phar to the directory /usr/local/bin/composer and then composer will be available Globally, by using the following command line in terminal!
mv composer.phar /usr/local/bin/composer
Question:
So the problem which leads me to Google over it is when I executed the above line in Mac OS X Terminal, it said that, Permission denied. Like as follows:
mv: rename composer.phar to /usr/local/bin/composer: Permission denied
Answer:
Following link led me to the solution like a charm and I'm thankful to that. The thing I just missed was sudo command before the above stated "Move" command line. Now my Move command is as follows:
sudo mv composer.phar /usr/local/bin/composer
Password:
It directly prompts you to authenticate yourself and see if you are authorized. So if you enter a valid password, then the Moving will be done, and you can just check if composer is globally installed, by using the following line.
composer about
I hope this answer helped you to broaden your view and finally resolve your problem.
Cheers!
I use the following for my HTML templates:
$(".main").empty();
var _template = '<p id="myelement">Your HTML Code</p>';
var template = $.parseHTML(_template);
var final = $(template).find("#myelement");
$(".main").append(final.html());
Note: Assuming if you are using jQuery
I had the same problem and I moved the project to a location where the path had no none-english letter and that fixed the problem
Example of solution with reflection, passed method must be public
import java.lang.reflect.Method;
import java.lang.reflect.InvocationTargetException;
public class Program {
int i;
public static void main(String[] args) {
Program obj = new Program(); //some object
try {
Method method = obj.getClass().getMethod("target");
repeatMethod( 5, obj, method );
}
catch ( NoSuchMethodException | IllegalAccessException | InvocationTargetException e) {
System.out.println( e );
}
}
static void repeatMethod (int times, Object object, Method method)
throws IllegalAccessException, InvocationTargetException {
for (int i=0; i<times; i++)
method.invoke(object);
}
public void target() { //public is necessary
System.out.println("target(): "+ ++i);
}
}
It's true, there are also more complete option, like changing the name of the app for a sentence you want. Check this tutorial it can help:
http://www.firstdroid.com/2010/08/04/adding-progress-bar-on-webview-android-tutorials/
In that tutorial you have a complete example how to use the progressbar in a webview app.
Adrian.
For deduplicate / dedupe / remove duplication / remove repeated rows / ??? ?? / ??? ?? ????, there are multiple ways.
If duplicated rows are exact the same, use group by
create table TABLE_NAME_DEDUP
as select column1, column2, ... (all column names)
from TABLE_NAME group by column1, column2, -- all column names
Then TABLE_NAME_DEDUP is the deduplicated table.
For example,
create table test (t1 varchar(5), t2 varchar(5));
insert into test values ('12345', 'ssdlh');
insert into test values ('12345', 'ssdlh');
create table test_dedup as
select * from test
group by t1, t2;
-----optional
--remove original table and rename dedup table to previous table
--this is not recommend in dev or qa. DROP table test; Alter table test_dedup rename to test;
You have a rowid, the rowid has duplication but other columns are different Records partial same, this may happened in a transactional system while update a row, and the rows failed to update will have nulls. You want to remove the duplication
create table test_dedup as select column1, column2, ... (all column names) from ( select * , row_number() over (partition by rowid order by column1, column2, ... (all column names except rowid) ) as cn from test ) where cn =1
This is using the feature that when you use order by, the null value will be ordered behind the non-null value.
create table test (rowid_ varchar(5), t1 varchar(5), t2 varchar(5));
insert into test values ('12345', 'ssdlh', null);
insert into test values ('12345', 'ssdlh', 'lhbzj');
create table test_dedup as
select rowid_, t1, t2 from
(select *
, row_number() over (partition by rowid_ order by t1, t2) as cn
from test)
where cn =1
;
-----optional
--remove original table and rename dedup table to previous table
--this is not recommend in dev or qa. DROP table test; Alter table test_dedup rename to test;
To add to rcs' answer, if you want to use position_dodge() with geom_bar() when x is a POSIX.ct date, you must multiply the width by 86400, e.g.,
ggplot(data=dat, aes(x=Types, y=Number, fill=sample)) +
geom_bar(position = "dodge", stat = 'identity') +
geom_text(aes(label=Number), position=position_dodge(width=0.9*86400), vjust=-0.25)
I know this is old, but I figured I'd give my input. I had to do this for a project at work and this was my solution.
I have a Building object that includes the Timezone using the TimeZone class and wanted to create zoneId and offset fields in a new class.
So what I did was create:
private String timeZoneId;
private String timeZoneOffset;
Then in the constructor I passed in the Building object and set these fields like so:
this.timeZoneId = building.getTimeZone().getID();
this.timeZoneOffset = building.getTimeZone().toZoneId().getId();
So timeZoneId might equal something like "EST" And timeZoneOffset might equal something like "-05:00"
I would like to not that you might not
for example:
$_SERVER['SERVER_ADDR']
when your on IIS, try:
$_SERVER['LOCAL_ADDR']
You can give a function expression a name that is actually private and is only visible from inside of the function ifself:
var factorial = function myself (n) {
if (n <= 1) {
return 1;
}
return n * myself(n-1);
}
typeof myself === 'undefined'
Here myself
is visible only inside of the function itself.
You can use this private name to call the function recursively.
See 13. Function Definition
of the ECMAScript 5 spec:
The Identifier in a FunctionExpression can be referenced from inside the FunctionExpression's FunctionBody to allow the function to call itself recursively. However, unlike in a FunctionDeclaration, the Identifier in a FunctionExpression cannot be referenced from and does not affect the scope enclosing the FunctionExpression.
Please note that Internet Explorer up to version 8 doesn't behave correctly as the name is actually visible in the enclosing variable environment, and it references a duplicate of the actual function (see patrick dw's comment below).
Alternatively you could use arguments.callee
to refer to the current function:
var factorial = function (n) {
if (n <= 1) {
return 1;
}
return n * arguments.callee(n-1);
}
The 5th edition of ECMAScript forbids use of arguments.callee() in strict mode, however:
(From MDN): In normal code arguments.callee refers to the enclosing function. This use case is weak: simply name the enclosing function! Moreover, arguments.callee substantially hinders optimizations like inlining functions, because it must be made possible to provide a reference to the un-inlined function if arguments.callee is accessed. arguments.callee for strict mode functions is a non-deletable property which throws when set or retrieved.
For null values in the dataframe of pyspark
Dict_Null = {col:df.filter(df[col].isNull()).count() for col in df.columns}
Dict_Null
# The output in dict where key is column name and value is null values in that column
{'#': 0,
'Name': 0,
'Type 1': 0,
'Type 2': 386,
'Total': 0,
'HP': 0,
'Attack': 0,
'Defense': 0,
'Sp_Atk': 0,
'Sp_Def': 0,
'Speed': 0,
'Generation': 0,
'Legendary': 0}
When the directory is deleted, the inode for that directory (and the inodes for its contents) are recycled. The pointer your shell has to that directory's inode (and its contents's inodes) are now no longer valid. When the directory is restored from backup, the old inodes are not (necessarily) reused; the directory and its contents are stored on random inodes. The only thing that stays the same is that the parent directory reuses the same name for the restored directory (because you told it to).
Now if you attempt to access the contents of the directory that your original shell is still pointing to, it communicates that request to the file system as a request for the original inode, which has since been recycled (and may even be in use for something entirely different now). So you get a stale file handle
message because you asked for some nonexistent data.
When you perform a cd
operation, the shell reevaluates the inode location of whatever destination you give it. Now that your shell knows the new inode for the directory (and the new inodes for its contents), future requests for its contents will be valid.
For such task, you should really be using PHP's DateTime class. Please ignore all of the answers advising you to use date() or date_set_time_zone, it's simply bad and outdated.
I'll use pseudocode to demonstrate, so try to adjust the code to suit your needs.
Assuming that variable $tz contains string name of a valid time zone and variable $timestamp contains the timestamp you wish to format according to time zone, the code would look like this:
$tz = 'Europe/London';
$timestamp = time();
$dt = new DateTime("now", new DateTimeZone($tz)); //first argument "must" be a string
$dt->setTimestamp($timestamp); //adjust the object to correct timestamp
echo $dt->format('d.m.Y, H:i:s');
DateTime class is powerful, and to grasp all of its capabilities - you should devote some of your time reading about it at php.net. To answer your question fully - yes, you can adjust the time zone parameter dynamically (on each iteration while reading from db, you can create a new DateTimeZone() object).
I had the same issue and the fix was to remove the placeholders and I changed the design of the form to use labels instead of placeholders...
I have an improvement on the answer @DewiMorgan gave for VS 2008 express. I have since confirmed it also works on VS 2005 express.
It lets you run the software without it EVER requiring registration, and also makes it so you don't have to manually delete the key every 30 days. It does this by preventing the key from ever being written.
(Deleting the correct key can also let you avoid registering VS 2015 "Community Edition," but using permissions to prevent the key being written will make the IDE crash, so I haven't found a great solution for it yet.)
The directions assume Visual C# Express 2008, but this works on all the other visual studio express apps I can find.
HKEY_CURRENT_USER\Software\Microsoft\VCSExpress\9.0\Registration
.Params
.
permissions
.Advanced...
permissions
tab, and uncheck the box labeled Inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here.
copy
.copy
button was renamed to add
, as in add inherited permissions as explicit permissions
.On Win10, there is a button called "Disable Inheritance" that does the same thing as the checkbox mentioned in step 5. It is necessary to create new permissions just for
Registration
, instead of inheriting those permissions from an upstream registry key.
OK
in the 'Advanced' window.Back in the first permissions window, click your user, and uncheck Full Control
.
Do the same thing for the Administrators
group.
Hit OK
or Apply
.
Congratulations, you will never again be plagued by the registration nag, and just like WinRAR, your trial will never expire.
You may have to do the same thing for other (non-Visual C#) programs, like Visual Basic express or Visual C++ express.
It has been reported by @IronManMark20 in the comments that simply deleting the registry key works and that Visual Studio does not attempt to re-create the key. I am not sure if I believe this because when I installed VS on a clean windows installation, the key was not created until I ran VS at least once. But for what it's worth, that may be an option as well.
This is a quirk of the C grammar. A label (Cleanup:
) is not allowed to appear immediately before a declaration (such as char *str ...;
), only before a statement (printf(...);
). In C89 this was no great difficulty because declarations could only appear at the very beginning of a block, so you could always move the label down a bit and avoid the issue. In C99 you can mix declarations and code, but you still can't put a label immediately before a declaration.
You can put a semicolon immediately after the label's colon (as suggested by Renan) to make there be an empty statement there; this is what I would do in machine-generated code. Alternatively, hoist the declaration to the top of the function:
int main (void)
{
char *str;
printf("Hello ");
goto Cleanup;
Cleanup:
str = "World\n";
printf("%s\n", str);
return 0;
}
You could use RAISE_APPLICATION_ERROR like this:
DECLARE
ex_custom EXCEPTION;
BEGIN
RAISE ex_custom;
EXCEPTION
WHEN ex_custom THEN
RAISE_APPLICATION_ERROR(-20001,'My exception was raised');
END;
/
That will raise an exception that looks like:
ORA-20001: My exception was raised
The error number can be anything between -20001 and -20999.
Simple use .filter()
[docs] (AND) using the multiple selector [docs] (OR):
$('[myc="blue"]').filter('[myid="1"],[myid="2"]');
In general, chaining selectors, like a.foo.bar[attr=value]
is some kind of AND selector.
jQuery has extensive documentation about the supported selectors, it's worth a read.
When you're using get()
you get a collection. In this case you need to iterate over it to get properties:
@foreach ($collection as $object)
{{ $object->title }}
@endforeach
Or you could just get one of objects by it's index:
{{ $collection[0]->title }}
Or get first object from collection:
{{ $collection->first() }}
When you're using find()
or first()
you get an object, so you can get properties with simple:
{{ $object->title }}
Check this one. It will work.
function fetch($i1,$i2,$i3,$i4)
{
$input_data = '<I>
<i1>'.$i1.'</i1>
<i2>'.$i2.'</i2>
<i3>'.$i2.'</i3>
<i4>'.$i3.'</i4>
</I>';
$curl = curl_init();
curl_setopt_array($curl, array(
CURLOPT_PORT => "8080",
CURLOPT_URL => "http://192.168.1.100:8080/avaliablity",
CURLOPT_RETURNTRANSFER => true,
CURLOPT_ENCODING => "",
CURLOPT_MAXREDIRS => 10,
CURLOPT_TIMEOUT => 30,
CURLOPT_HTTP_VERSION => CURL_HTTP_VERSION_1_1,
CURLOPT_CUSTOMREQUEST => "POST",
CURLOPT_POSTFIELDS => $input_data,
CURLOPT_HTTPHEADER => array(
"Cache-Control: no-cache",
"Content-Type: application/xml"
),
));
$response = curl_exec($curl);
$err = curl_error($curl);
curl_close($curl);
if ($err) {
echo "cURL Error #:" . $err;
} else {
echo $response;
}
}
fetch('i1','i2','i3','i4');
Use LinkedHashMap and use this function.
private LinkedHashMap<Integer, String> map = new LinkedHashMap<Integer, String>();
Define like this and.
private Entry getEntry(int id){
Iterator iterator = map.entrySet().iterator();
int n = 0;
while(iterator.hasNext()){
Entry entry = (Entry) iterator.next();
if(n == id){
return entry;
}
n ++;
}
return null;
}
The function can return the selected entry.
If you want to modify the original array instead of returning a new array, use .push()
...
array1.push.apply(array1, array2);
array1.push.apply(array1, array3);
I used .apply
to push the individual members of arrays 2
and 3
at once.
or...
array1.push.apply(array1, array2.concat(array3));
To deal with large arrays, you can do this in batches.
for (var n = 0, to_add = array2.concat(array3); n < to_add.length; n+=300) {
array1.push.apply(array1, to_add.slice(n, n+300));
}
If you do this a lot, create a method or function to handle it.
var push_apply = Function.apply.bind([].push);
var slice_call = Function.call.bind([].slice);
Object.defineProperty(Array.prototype, "pushArrayMembers", {
value: function() {
for (var i = 0; i < arguments.length; i++) {
var to_add = arguments[i];
for (var n = 0; n < to_add.length; n+=300) {
push_apply(this, slice_call(to_add, n, n+300));
}
}
}
});
and use it like this:
array1.pushArrayMembers(array2, array3);
var push_apply = Function.apply.bind([].push);_x000D_
var slice_call = Function.call.bind([].slice);_x000D_
_x000D_
Object.defineProperty(Array.prototype, "pushArrayMembers", {_x000D_
value: function() {_x000D_
for (var i = 0; i < arguments.length; i++) {_x000D_
var to_add = arguments[i];_x000D_
for (var n = 0; n < to_add.length; n+=300) {_x000D_
push_apply(this, slice_call(to_add, n, n+300));_x000D_
}_x000D_
}_x000D_
}_x000D_
});_x000D_
_x000D_
var array1 = ['a','b','c'];_x000D_
var array2 = ['d','e','f'];_x000D_
var array3 = ['g','h','i'];_x000D_
_x000D_
array1.pushArrayMembers(array2, array3);_x000D_
_x000D_
document.body.textContent = JSON.stringify(array1, null, 4);
_x000D_
That only means that an undefined column or parameter name was detected. The errror that DB2 gives should point what that may be:
DB2 SQL Error: SQLCODE=-206, SQLSTATE=42703, SQLERRMC=[THE_UNDEFINED_COLUMN_OR_PARAMETER_NAME], DRIVER=4.8.87
Double check your table definition. Maybe you just missed adding something.
I also tried google-ing this problem and saw this:
http://www.coderanch.com/t/515475/JDBC/databases/sql-insert-statement-giving-sqlcode
I have another solution:- Generating a signing key You can generate a private signing key using keytool. On Windows keytool must be run from C:\Program Files\Java\jdkx.x.x_x\bin.
$ keytool -genkey -v -keystore my-release-key.keystore -alias my-key-alias -keyalg RSA -keysize 2048 -validity 10000
Place the my-release-key.keystore file under the android/app directory in your project folder.
Edit the file android/app/build.gradle in your project folder and add the signing config,
android {
....
signingConfigs {
release {
storeFile file('my-release-key.keystore')
storePassword 'yourpassword'
keyAlias 'my-key-alias'
keyPassword 'yourpassword'
}
}}}
buildTypes {release {signingConfig signingConfigs.release}}
and run
gradlew assembleRelease
This will give you two files at android\app\build\outputs\apk app-release.apk and app-release-unsigned.apk now install the app-release.apk in your android device.
Pattern based configs are scheduled for 2.0.0 release of ESLint. For now, however, you will have to create two separate tasks (as mentioned in the comments). One for tests and one for the rest of the code and run both of them, while providing different .eslintrc files.
P.S. There's a jest environment coming in the next release of ESLint, it will register all of the necessary globals.
To see your log in SQL Developer
then press:
CTRL+SHIFT + L (or CTRL + CMD + L on macOS)
or
View -> Log
or by using mysql query
show errors;
I prefer to return the identity value as an output parameter. The result of the SP should indicate whether it succeeded or not. A value of 0 indicates the SP successfully completed, a non-zero value indicates an error. Also, if you ever need to make a change and return an additional value from the SP you don't need to make any changes other than adding an additional output parameter.
In a project using vs 2010, I was only able to solve the problem by installing an older version of the package that I needed via Package Manager Console.
This command worked:
PM> Install-Package EPPlus -Version 4.5.3.1
This command did not work:
PM> Install-Package EPPlus -Version 4.5.3.2
Using the excellent answer from Max and This post about adding extra data files like images or sound & my own research/testing, I've figured out what I believe is the easiest way to add such files.
If you would like to see a live example, my repository is here on GitHub.
Note: this is for compiling using the --onefile
or -F
command with pyinstaller.
To solve the issue we need to specifically tell Pyinstaller that we have extra files that need to be "bundled" with the application.
We also need to be using a 'relative' path, so the application can run properly when it's running as a Python Script or a Frozen EXE.
With that being said we need a function that allows us to have relative paths. Using the function that Max Posted we can easily solve the relative pathing.
def img_resource_path(relative_path):
""" Get absolute path to resource, works for dev and for PyInstaller """
try:
# PyInstaller creates a temp folder and stores path in _MEIPASS
base_path = sys._MEIPASS
except Exception:
base_path = os.path.abspath(".")
return os.path.join(base_path, relative_path)
We would use the above function like this so the application icon shows up when the app is running as either a Script OR Frozen EXE.
icon_path = img_resource_path("app/img/app_icon.ico")
root.wm_iconbitmap(icon_path)
The next step is that we need to instruct Pyinstaller on where to find the extra files when it's compiling so that when the application is run, they get created in the temp directory.
We can solve this issue two ways as shown in the documentation, but I personally prefer managing my own .spec file so that's how we're going to do it.
First, you must already have a .spec file. In my case, I was able to create what I needed by running pyinstaller
with extra args, you can find extra args here. Because of this, my spec file may look a little different than yours but I'm posting all of it for reference after I explain the important bits.
added_files is essentially a List containing Tuple's, in my case I'm only wanting to add a SINGLE image, but you can add multiple ico's, png's or jpg's using ('app/img/*.ico', 'app/img')
You may also create another tuple like soadded_files = [ (), (), ()]
to have multiple imports
The first part of the tuple defines what file or what type of file's you would like to add as well as where to find them. Think of this as CTRL+C
The second part of the tuple tells Pyinstaller, to make the path 'app/img/' and place the files in that directory RELATIVE to whatever temp directory gets created when you run the .exe. Think of this as CTRL+V
Under a = Analysis([main...
, I've set datas=added_files
, originally it used to be datas=[]
but we want out the list of imports to be, well, imported so we pass in our custom imports.
You don't need to do this unless you want a specific icon for the EXE, at the bottom of the spec file I'm telling Pyinstaller to set my application icon for the exe with the option icon='app\\img\\app_icon.ico'
.
added_files = [
('app/img/app_icon.ico','app/img/')
]
a = Analysis(['main.py'],
pathex=['D:\\Github Repos\\Processes-Killer\\Process Killer'],
binaries=[],
datas=added_files,
hiddenimports=[],
hookspath=[],
runtime_hooks=[],
excludes=[],
win_no_prefer_redirects=False,
win_private_assemblies=False,
cipher=block_cipher,
noarchive=False)
pyz = PYZ(a.pure, a.zipped_data,
cipher=block_cipher)
exe = EXE(pyz,
a.scripts,
a.binaries,
a.zipfiles,
a.datas,
[],
name='Process Killer',
debug=False,
bootloader_ignore_signals=False,
strip=False,
upx=True,
upx_exclude=[],
runtime_tmpdir=None,
console=True , uac_admin=True, icon='app\\img\\app_icon.ico')
I'm very lazy; I don't like typing things more than I have to. I've created a .bat file that I can just click. You don't have to do this, this code will run in a command prompt shell just fine without it.
Since the .spec file contains all of our compiling settings & args (aka options) we just have to give that .spec file to Pyinstaller.
pyinstaller.exe "Process Killer.spec"
Other solutions are great but they didn't take care of the fact that watermark shouldn't get selected on selection from the mouse. This fiddle takes care or that: https://jsfiddle.net/MiKr13/d1r4o0jg/9/
This will be better option for pdf or static html.
CSS:
#watermark {
opacity: 0.2;
font-size: 52px;
color: 'black';
background: '#ccc';
position: absolute;
cursor: default;
user-select: none;
-webkit-user-select: none;
-khtml-user-select: none;
-moz-user-select: none;
-ms-user-select: none;
right: 5px;
bottom: 5px;
}
I had the same doubt, but see the PHP docu:
https://www.php.net/manual/en/function.file-exists.php
https://www.php.net/manual/en/function.is-dir.php
You will see that is_dir()
has both properties.
Return Values is_dir Returns TRUE if the filename exists and is a directory, FALSE otherwise.
The Uri class is generally your best bet for manipulating Urls.
'
Single quotedThe simplest way to specify a string is to enclose it in single quotes. Single quote is generally faster, and everything quoted inside treated as plain string.
Example:
echo 'Start with a simple string';
echo 'String\'s apostrophe';
echo 'String with a php variable'.$name;
"
Double quotedUse double quotes in PHP to avoid having to use the period to separate code (Note: Use curly braces {}
to include variables if you do not want to use concatenation (.
) operator) in string.
Example:
echo "Start with a simple string";
echo "String's apostrophe";
echo "String with a php variable {$name}";
Yes. It is slightly faster to use single quotes.
PHP won't use additional processing to interpret what is inside the single quote. when you use double quotes PHP has to parse to check if there are any variables within the string.
The following command first registers the function in the context, then calls it:
. ./myScript.sh && function_name
Test Data
DECLARE @Table1 TABLE(ID INT, Value INT)
INSERT INTO @Table1 VALUES (1,100),(1,200),(1,300),(1,400)
Query
SELECT ID
,STUFF((SELECT ', ' + CAST(Value AS VARCHAR(10)) [text()]
FROM @Table1
WHERE ID = t.ID
FOR XML PATH(''), TYPE)
.value('.','NVARCHAR(MAX)'),1,2,' ') List_Output
FROM @Table1 t
GROUP BY ID
Result Set
+--------------------------+
¦ ID ¦ List_Output ¦
¦----+---------------------¦
¦ 1 ¦ 100, 200, 300, 400 ¦
+--------------------------+
SQL Server 2017 and Later Versions
If you are working on SQL Server 2017 or later versions, you can use built-in SQL Server Function STRING_AGG to create the comma delimited list:
DECLARE @Table1 TABLE(ID INT, Value INT);
INSERT INTO @Table1 VALUES (1,100),(1,200),(1,300),(1,400);
SELECT ID , STRING_AGG([Value], ', ') AS List_Output
FROM @Table1
GROUP BY ID;
Result Set
+--------------------------+
¦ ID ¦ List_Output ¦
¦----+---------------------¦
¦ 1 ¦ 100, 200, 300, 400 ¦
+--------------------------+
In order to ssh to a Ubuntu VM running in VirtualBox from your host machine, you need to set up two network adapters for the VM.
First of all, stop the VM if not yet.
Then select the VM and click the Settings menu in the VirtualBox toolbar:
(Note: you don't need to set up any port forwarding.)
That's it. Once set up, you can start your VM. In your VM, the network configuration will look like below and you'll have Internet access too:
Also in your host machine, you can ssh to your VM:
Be sure that the SSH server has been installed and up running in the VM.
$ ps aux | grep sshd
root 864 0.1 0.5 65512 5392 ? Ss 22:10 0:00 /usr/sbin/sshd -D
If not, install it:
$ sudo apt-get install openssh-server
Also for your information:
You could create a unique index with a coalesce on the MenuId:
CREATE UNIQUE INDEX
Favorites_UniqueFavorite ON Favorites
(UserId, COALESCE(MenuId, '00000000-0000-0000-0000-000000000000'), RecipeId);
You'd just need to pick a UUID for the COALESCE that will never occur in "real life". You'd probably never see a zero UUID in real life but you could add a CHECK constraint if you are paranoid (and since they really are out to get you...):
alter table Favorites
add constraint check
(MenuId <> '00000000-0000-0000-0000-000000000000')
The six library helps with writing code that is compatible with both python 2.5+ and python 3. It has an iteritems method that will work in both python 2 and 3. Example:
import six
d = dict( foo=1, bar=2 )
for k, v in six.iteritems(d):
print(k, v)
I would guess it makes an infinite loop bc you skip the number 100. If you set the critera to be less than 101 it should do the trick :)
def gukan(count):
while count<100:
print(count)
count=count+3;
gukan(0)
I used interop to open Excel and to modify the column widths once the data was done. If you use interop to spit the data into a new Excel workbook (if this is what you want), it will be terribly slow. Instead, I generated a .CSV
, then opened the .CSV
in Excel. This has its own problems, but I've found this the quickest method.
First, convert the .CSV
:
// Convert array data into CSV format.
// Modified from http://csharphelper.com/blog/2018/04/write-a-csv-file-from-an-array-in-c/.
private string GetCSV(List<string> Headers, List<List<double>> Data)
{
// Get the bounds.
var rows = Data[0].Count;
var cols = Data.Count;
var row = 0;
// Convert the array into a CSV string.
StringBuilder sb = new StringBuilder();
// Add the first field in this row.
sb.Append(Headers[0]);
// Add the other fields in this row separated by commas.
for (int col = 1; col < cols; col++)
sb.Append("," + Headers[col]);
// Move to the next line.
sb.AppendLine();
for (row = 0; row < rows; row++)
{
// Add the first field in this row.
sb.Append(Data[0][row]);
// Add the other fields in this row separated by commas.
for (int col = 1; col < cols; col++)
sb.Append("," + Data[col][row]);
// Move to the next line.
sb.AppendLine();
}
// Return the CSV format string.
return sb.ToString();
}
Then, export it to Excel:
public void ExportToExcel()
{
// Initialize app and pop Excel on the screen.
var excelApp = new Excel.Application { Visible = true };
// I use unix time to give the files a unique name that's almost somewhat useful.
DateTime dateTime = DateTime.UtcNow;
long unixTime = ((DateTimeOffset)dateTime).ToUnixTimeSeconds();
var path = @"C:\Users\my\path\here + unixTime + ".csv";
var csv = GetCSV();
File.WriteAllText(path, csv);
// Create a new workbook and get its active sheet.
excelApp.Workbooks.Open(path);
var workSheet = (Excel.Worksheet)excelApp.ActiveSheet;
// iterate over each value and throw it in the chart
for (var column = 0; column < Data.Count; column++)
{
((Excel.Range)workSheet.Columns[column + 1]).AutoFit();
}
currentSheet = workSheet;
}
You'll have to install some stuff, too...
Right click on the solution from solution explorer and select "Manage NuGet Packages." - add Microsoft.Office.Interop.Excel
It might actually work right now if you created the project the way interop wants you to. If it still doesn't work, I had to create a new project in a different category. Under New > Project, select Visual C# > Windows Desktop > Console App. Otherwise, the interop tools won't work.
In case I forgot anything, here's my 'using' statements:
using System;
using System.Collections.Generic;
using System.IO;
using System.Linq;
using System.Text;
using Excel = Microsoft.Office.Interop.Excel;
Here is the code to read the excel data by column.
public ArrayList<String> extractExcelContentByColumnIndex(int columnIndex){
ArrayList<String> columndata = null;
try {
File f = new File("sample.xlsx")
FileInputStream ios = new FileInputStream(f);
XSSFWorkbook workbook = new XSSFWorkbook(ios);
XSSFSheet sheet = workbook.getSheetAt(0);
Iterator<Row> rowIterator = sheet.iterator();
columndata = new ArrayList<>();
while (rowIterator.hasNext()) {
Row row = rowIterator.next();
Iterator<Cell> cellIterator = row.cellIterator();
while (cellIterator.hasNext()) {
Cell cell = cellIterator.next();
if(row.getRowNum() > 0){ //To filter column headings
if(cell.getColumnIndex() == columnIndex){// To match column index
switch (cell.getCellType()) {
case Cell.CELL_TYPE_NUMERIC:
columndata.add(cell.getNumericCellValue()+"");
break;
case Cell.CELL_TYPE_STRING:
columndata.add(cell.getStringCellValue());
break;
}
}
}
}
}
ios.close();
System.out.println(columndata);
} catch (Exception e) {
e.printStackTrace();
}
return columndata;
}
As of jquery ui version 1.8.16 below is how I got it working.
$('#element').dialog({
buttons: {
"Save": {
text: 'Save',
class: 'btn primary',
click: function () {
// do stuff
}
}
});
This is super old, but I figured I'd add my 2c. DATE_FORMAT
does indeed return a string, but I was looking for the CAST
function, in the situation that I already had a datetime string in the database and needed to pattern match against it:
http://dev.mysql.com/doc/refman/5.0/en/cast-functions.html
In this case, you'd use:
CAST(date_value AS char)
This answers a slightly different question, but the question title seems ambiguous enough that this might help someone searching.
In answer to your first question, it should be as simple as replacing:
when(LoggerFactory.getLogger(GoodbyeController.class)).thenReturn(loggerMock);
with
when(LoggerFactory.getLogger(any(Class.class))).thenReturn(loggerMock);
Regarding your second question (and possibly the puzzling behavior with the first), I think the problem is that logger is static. So,
private static Logger logger = LoggerFactory.getLogger(GoodbyeController.class);
is executed when the class is initialized, not the when the object is instantiated. Sometimes this can be at about the same time, so you'll be OK, but it's hard to guarantee that. So you set up LoggerFactory.getLogger to return your mock, but the logger variable may have already been set with a real Logger object by the time your mocks are set up.
You may be able to set the logger explicitly using something like ReflectionTestUtils (I don't know if that works with static fields) or change it from a static field to an instance field. Either way, you don't need to mock LoggerFactory.getLogger because you'll be directly injecting the mock Logger instance.
You will only see the difference if you have ties within a partition for a particular ordering value.
RANK
and DENSE_RANK
are deterministic in this case, all rows with the same value for both the ordering and partitioning columns will end up with an equal result, whereas ROW_NUMBER
will arbitrarily (non deterministically) assign an incrementing result to the tied rows.
Example: (All rows have the same StyleID
so are in the same partition and within that partition the first 3 rows are tied when ordered by ID
)
WITH T(StyleID, ID)
AS (SELECT 1,1 UNION ALL
SELECT 1,1 UNION ALL
SELECT 1,1 UNION ALL
SELECT 1,2)
SELECT *,
RANK() OVER(PARTITION BY StyleID ORDER BY ID) AS 'RANK',
ROW_NUMBER() OVER(PARTITION BY StyleID ORDER BY ID) AS 'ROW_NUMBER',
DENSE_RANK() OVER(PARTITION BY StyleID ORDER BY ID) AS 'DENSE_RANK'
FROM T
Returns
StyleID ID RANK ROW_NUMBER DENSE_RANK
----------- -------- --------- --------------- ----------
1 1 1 1 1
1 1 1 2 1
1 1 1 3 1
1 2 4 4 2
You can see that for the three identical rows the ROW_NUMBER
increments, the RANK
value remains the same then it leaps to 4
. DENSE_RANK
also assigns the same rank to all three rows but then the next distinct value is assigned a value of 2.
Unfortunately:
It seems you can not reference a single item from an array in values/arrays.xml with XML. Of course you can in Java, but not XML. There's no information on doing so in the Android developer reference, and I could not find any anywhere else.
It seems you can't use an array as a key in the preferences layout. Each key has to be a single value with it's own key name.
What I want to accomplish: I want to be able to loop through the 17 preferences, check if the item is checked, and if it is, load the string from the string array for that preference name.
Here's the code I was hoping would complete this task:
SharedPreferences prefs = PreferenceManager.getDefaultSharedPreferences(getBaseContext());
ArrayAdapter<String> itemsArrayList = new ArrayAdapter<String>(getBaseContext(), android.R.layout.simple_list_item_1);
String[] itemNames = getResources().getStringArray(R.array.itemNames_array);
for (int i = 0; i < 16; i++) {
if (prefs.getBoolean("itemKey[i]", true)) {
itemsArrayList.add(itemNames[i]);
}
}
What I did:
I set a single string for each of the items, and referenced the single strings in the . I use the single string reference for the preferences layout checkbox titles, and the array for my loop.
To loop through the preferences, I just named the keys like key1, key2, key3, etc. Since you reference a key with a string, you have the option to "build" the key name at runtime.
Here's the new code:
for (int i = 0; i < 16; i++) {
if (prefs.getBoolean("itemKey" + String.valueOf(i), true)) {
itemsArrayList.add(itemNames[i]);
}
}
You are running Python 2 code on Python 3. In Python 3, the module has been renamed to http.client
.
You could try to run the 2to3
tool on your code, and try to have it translated automatically. References to httplib
will automatically be rewritten to use http.client
instead.
Yes VBA is the way to go.
But, if you don't need to have a cell with formula that auto-counts/updates the number of cells with a particular colour, an alternative is simply to use the 'Find and Replace' function and format the cell to have the appropriate colour fill.
Hitting 'Find All' will give you the total number of cells found at the bottom left of the dialogue box.
This becomes especially useful if your search range is massive. The VBA script will be very slow but the 'Find and Replace' function will still be very quick.
Yes, safari will detect the *.ipa and will try to install it, but the ipa needs to be correctly signed and only allowed devices would be able to install it.
http://www.diawi.com is a service that will help you with this process.
All of this is for Ad-hoc distribution, not for production apps.
More information on below link : Is there a way to install iPhone App via browser?
I need to select character to split urls in string, so I decided to create list of characters which could not be found in URL by myself:
>>> allowed = "-_.~!*'();:@&=+$,/?%#[]?@ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789"
>>> from string import printable
>>> ''.join(set(printable).difference(set(allowed)))
'`" <\x0b\n\r\x0c\\\t{^}|>'
So, the possible choices are the newline, tab, space, backslash and "<>{}^|
. I guess I'll go with the space or newline. :)
For the people who might be part of more than one team, this can be your problem:
To fix:
Make sure that the bundle id is set as:
$(PRODUCT_BUNDLE_IDENTIFIER)
Use the substring method, as follows:
int n = 8;
String s = "Hello, World!";
System.out.println(s.substring(0,n);
If n is greater than the length of the string, this will throw an exception, as one commenter has pointed out. one simple solution is to wrap all this in the condition if(s.length()<n)
in your else
clause, you can choose whether you just want to print/return the whole String or handle it another way.
You can also do this to set a header for all future gets for the Session object, where x-test will be in all s.get() calls:
s = requests.Session()
s.auth = ('user', 'pass')
s.headers.update({'x-test': 'true'})
# both 'x-test' and 'x-test2' are sent
s.get('http://httpbin.org/headers', headers={'x-test2': 'true'})
from: http://docs.python-requests.org/en/latest/user/advanced/#session-objects
One of the reasons why the global variable needs a prefix (called a "sigil") is because in Ruby, unlike in C, you don't have to declare your variables before assigning to them. The sigil is used as a way to be explicit about the scope of the variable.
Without a specific prefix for globals, given a statement pointNew = offset + point
inside your draw
method then offset
refers to a local variable inside the method (and results in a NameError
in this case). The same for @
used to refer to instance variables and @@
for class variables.
In other languages that use explicit declarations such as C
, Java
etc. the placement of the declaration is used to control the scope.
This is how i changed placeholder arrow color, the 2 classes are for dropdown open and dropdown closed, you need to change the #fff to the color you want:
.select2-container--default.select2-container--open .select2-selection--single .select2-selection__arrow b {
border-color: transparent transparent #fff transparent !important;
}
.select2-container--default .select2-selection--single .select2-selection__arrow b {
border-color: #fff transparent transparent transparent !important;
}
For those who don't want to remember the syntax everytime here is a simple encapsulation:
public class FileDialogFilter : List<string>
{
public string Explanation { get; }
public FileDialogFilter(string explanation, params string[] extensions)
{
Explanation = explanation;
AddRange(extensions);
}
public string GetFileDialogRepresentation()
{
if (!this.Any())
{
throw new ArgumentException("No file extension is defined.");
}
StringBuilder builder = new StringBuilder();
builder.Append(Explanation);
builder.Append(" (");
builder.Append(String.Join(", ", this));
builder.Append(")");
builder.Append("|");
builder.Append(String.Join(";", this));
return builder.ToString();
}
}
public class FileDialogFilterCollection : List<FileDialogFilter>
{
public string GetFileDialogRepresentation()
{
return String.Join("|", this.Select(filter => filter.GetFileDialogRepresentation()));
}
}
Usage:
FileDialogFilter filterImage = new FileDialogFilter("Image Files", "*.jpeg", "*.bmp");
FileDialogFilter filterOffice = new FileDialogFilter("Office Files", "*.doc", "*.xls", "*.ppt");
FileDialogFilterCollection filters = new FileDialogFilterCollection
{
filterImage,
filterOffice
};
OpenFileDialog fileDialog = new OpenFileDialog
{
Filter = filters.GetFileDialogRepresentation()
};
fileDialog.ShowDialog();
If you are not going to use the NumPy library, you can use the nested list. This is code to implement the dynamic nested list (2-dimensional lists).
Let r
is the number of rows
let r=3
m=[]
for i in range(r):
m.append([int(x) for x in raw_input().split()])
Any time you can append a row using
m.append([int(x) for x in raw_input().split()])
Above, you have to enter the matrix row-wise. To insert a column:
for i in m:
i.append(x) # x is the value to be added in column
To print the matrix:
print m # all in single row
for i in m:
print i # each row in a different line
Try the xlrd library.
[Edit] - from what I can see from your comment, something like the snippet below might do the trick. I'm assuming here that you're just searching one column for the word 'john', but you could add more or make this into a more generic function.
from xlrd import open_workbook
book = open_workbook('simple.xls',on_demand=True)
for name in book.sheet_names():
if name.endswith('2'):
sheet = book.sheet_by_name(name)
# Attempt to find a matching row (search the first column for 'john')
rowIndex = -1
for cell in sheet.col(0): #
if 'john' in cell.value:
break
# If we found the row, print it
if row != -1:
cells = sheet.row(row)
for cell in cells:
print cell.value
book.unload_sheet(name)
If you need pixel level control over canvas you can do using createImageData and putImageData.
HTML:
<canvas id="qrCode" width="200", height="200">
QR Code
</canvas>
And JavaScript:
function setPixel(imageData, pixelData) {
var index = (pixelData.x + pixelData.y * imageData.width) * 4;
imageData.data[index+0] = pixelData.r;
imageData.data[index+1] = pixelData.g;
imageData.data[index+2] = pixelData.b;
imageData.data[index+3] = pixelData.a;
}
element = document.getElementById("qrCode");
c = element.getContext("2d");
pixcelSize = 4;
width = element.width;
height = element.height;
imageData = c.createImageData(width, height);
for (i = 0; i < 1000; i++) {
x = Math.random() * width / pixcelSize | 0; // |0 to Int32
y = Math.random() * height / pixcelSize| 0;
for(j=0;j < pixcelSize; j++){
for(k=0;k < pixcelSize; k++){
setPixel( imageData, {
x: x * pixcelSize + j,
y: y * pixcelSize + k,
r: 0 | 0,
g: 0 | 0,
b: 0 * 256 | 0,
a: 255 // 255 opaque
});
}
}
}
c.putImageData(imageData, 0, 0);