TiCPP is a "more c++" version of TinyXML.
'TiCPP' is short for the official name TinyXML++. It is a completely new interface to TinyXML (http://www.grinninglizard.com/tinyxml/) that uses MANY of the C++ strengths. Templates, exceptions, and much better error handling. It is also fully documented in doxygen. It is really cool because this version let's you interface tiny the exact same way as before or you can choose to use the new 'ticpp' classes. All you need to do is define TIXML_USE_TICPP. It has been tested in VC 6.0, VC 7.0, VC 7.1, VC 8.0, MinGW gcc 3.4.5, and in Linux GNU gcc 3+
https://anzeljg.github.io/rin2/book2/2405/docs/tkinter/universal.html
w.winfo_children()
Returns a list of all w's children, in their stacking order from lowest (bottom) to highest (top).
for widget in frame.winfo_children():
widget.destroy()
Will destroy all the widget in your frame. No need for a second frame.
From your question, I think it is safe to assume you have CASCADING DELETES turned on.
All that is needed in that case is
DELETE FROM MainTable
WHERE PrimaryKey = ???
You database engine will take care of deleting the corresponding referencing records.
I have also used following link as others have suggested you for bluetooth communication.
http://developer.android.com/guide/topics/connectivity/bluetooth.html
The thing is all you need is a class BluetoothChatService.java
this class has following threads:
Now when you call start function of the BluetoothChatService like:
mChatService.start();
It starts accept thread which means it will start looking for connection.
Now when you call
mChatService.connect(<deviceObject>,false/true);
Here first argument is device object that you can get from paired devices list or when you scan for devices you will get all the devices in range you can pass that object to this function and 2nd argument is a boolean to make secure or insecure connection.
connect
function will start connecting thread which will look for any device which is running accept thread.
When such a device is found both accept thread and connecting thread will call connected function in BluetoothChatService:
connected(mmSocket, mmDevice, mSocketType);
this method starts connected thread in both the devices:
Using this socket object connected thread obtains the input and output stream to the other device.
And calls read
function on inputstream in a while loop so that it's always trying read from other device so that whenever other device send a message this read function returns that message.
BluetoothChatService also has a write
method which takes byte[]
as input and calls write method on connected thread.
mChatService.write("your message".getByte());
write method in connected thread just write this byte data to outputsream of the other device.
public void write(byte[] buffer) {
try {
mmOutStream.write(buffer);
// Share the sent message back to the UI Activity
// mHandler.obtainMessage(
// BluetoothGameSetupActivity.MESSAGE_WRITE, -1, -1,
// buffer).sendToTarget();
} catch (IOException e) {
Log.e(TAG, "Exception during write", e);
}
}
Now to communicate between two devices just call write function on mChatService and handle the message that you will receive on the other device.
If we have built in functions to convert your integer values to COLOR then why to worry.
string hexValue = string.Format("{0:X}", intColor);
Color brushes = System.Drawing.ColorTranslator.FromHtml("#"+hexValue);
If your string constraint is not just one string you can drop those corresponding rows with:
df = df[~df['your column'].isin(['list of strings'])]
The above will drop all rows containing elements of your list
I would like to add to Narm's answer here and have added the same as a comment under her answer.
Basically the datatype of the value assigned to [(value)] should match the datatype of the [value] attribute used for the mat-options. Especially if some one populates the options using an *ngFor as below
<mat-form-field fxHide.gt-sm='true'>
<mat-select [(value)]="heroes[0].id">
<mat-option *ngFor="let hero of heroes" [value]="hero.id">{{ hero.name }}</mat-option>
</mat-select>
</mat-form-field>
Notice that, if you change the [(value)]="heroes[0].id" to [(value)]="heroes[0].name" it won't work as the data types don't match.
These are my findings, please feel free to correct me if needed.
For netbeans 8.2
1. First run command as administrator.
2. set path to you downloads folder using cd 'location to the downloads folder'
3. extract using netbeans-8.2-windows.exe --extract command
4. run java -jar bundle.jar
5. Done :)
I've looked at the given answers, but a lot of them are more complicated than needed or remove map elements when several keys have same value.
Here is a solution that I think fits better:
public static <K, V extends Comparable<V>> Map<K, V> sortByValues(final Map<K, V> map) {
Comparator<K> valueComparator = new Comparator<K>() {
public int compare(K k1, K k2) {
int compare = map.get(k2).compareTo(map.get(k1));
if (compare == 0) return 1;
else return compare;
}
};
Map<K, V> sortedByValues = new TreeMap<K, V>(valueComparator);
sortedByValues.putAll(map);
return sortedByValues;
}
Note that the map is sorted from the highest value to the lowest.
I use python setup.py build_ext -R/usr/local/lib -I/usr/local/include/libcalg-1.0
and the compiled .so file is under the build folder.
you can type python setup.py --help build_ext
to see the explanations of -R and -I
You need to change your text to 'Plain text' before pasting into the HTML document. This looks like an error I've had before by pasting straight from MS word.
MS word and other rich text editors often place hidden or invalid chars into your code. Try using —
for your dashes, or ’
for apostrophes (etc), to eliminate the need for relying on your char encoding.
I've read some good answers here; however, there are some minor mistakes. Some have answered that the Message Length field in the UDP header is a max of 65535 (0xFFFF); this is technically true. Some have answered that the actual maximum is (65535 - IPHL - UDPHL = 65507). The mistake, is that the Message Length field in the UDP Header includes all payload (Layers 5-7), plus the length of the UDP Header (8 Bytes). What this means is that if the message length field is 200 Bytes (0x00C8), the payload is actually 192 Bytes (0x00C0).
What is hard and fast is that the maximum size of an IP datagram is 65535 Bytes. This number is arrived at the sum total of the L3 and L4 headers, plus the Layers 5-7 payload. IP Header + UDP Header + Layers 5-7 = 65535 (Max).
The most correct answer for what is the maximum size of a UDP datagam is 65515 Bytes (0xFFEB), as a UDP datagram includes the UDP header. The most correct answer for what is the maximum size of a UDP payload is 65507 Bytes, as a UDP Payload does not include the UDP header.
~(5.5) // => -6
~(-6) // => 5
~~5.5 // => 5 (same as Math.floor(5.5))
~~(-5.5) // => -5 (NOT the same as Math.floor(-5.5), which would give -6 )
For more info, see:
Use the time.Now() and time.Format() functions (as time.LocalTime() doesn't exist anymore as of Go 1.0.3)
t := time.Now()
fmt.Println(t.Format("20060102150405"))
Online demo (with date fixed in the past in the playground, never mind)
Running the below command solved the problem for me.
git config --global credential.helper wincred
Please refer the below github documentation:
https://help.github.com/articles/caching-your-github-password-in-git/
I ran into this error in a different situation, posting the resolution for those arriving via search: from within Visual Studio, I had copied a file from one project and pasted into another. Turns out that creates a symbolic link, not an actual copy. Thus the project did not find the file in the current working directory as expected. When I made a physical copy instead, in Windows Explorer, suddenly #include "myfile.h"
worked.
I would like share an example to understand the usage of stream().filter
Code Snippet: Sample program to identify even number.
import java.util.ArrayList;
import java.util.List;
import java.util.stream.Collectors;
public void fetchEvenNumber(){
List<Integer> numberList = new ArrayList<>();
numberList.add(10);
numberList.add(11);
numberList.add(12);
numberList.add(13);
numberList.add(14);
numberList.add(15);
List<Integer> evenNumberListObj = numberList.stream().filter(i -> i%2 == 0).collect(Collectors.toList());
System.out.println(evenNumberListObj);
}
Output will be : [10, 12, 14]
List evenNumberListObj = numberList.stream().filter(i -> i%2 == 0).collect(Collectors.toList());
numberList: it is an ArrayList object contains list of numbers.
java.util.Collection.stream() : stream() will get the stream of collection, which will return the Stream of Integer.
filter: Returns a stream that match the given predicate. i.e based on given condition (i -> i%2 != 0) returns the matching stream.
collect: whatever the stream of Integer filter based in the filter condition, those integer will be put in a list.
My RestSharp POST method:
var client = new RestClient(ServiceUrl);
var request = new RestRequest("/resource/", Method.POST);
// Json to post.
string jsonToSend = JsonHelper.ToJson(json);
request.AddParameter("application/json; charset=utf-8", jsonToSend, ParameterType.RequestBody);
request.RequestFormat = DataFormat.Json;
try
{
client.ExecuteAsync(request, response =>
{
if (response.StatusCode == HttpStatusCode.OK)
{
// OK
}
else
{
// NOK
}
});
}
catch (Exception error)
{
// Log
}
Project Files Services Tabls
go files tabs
drag drop file to libs files hover.
return project tabs and what are you see :)
import os
print os.name
This gives you the essential information you will usually need. To distinguish between, say, different editions of Windows, you will have to use a platform-specific method.
This is because you have specified the form method as GET
Change code in the view to this:
using (@Html.BeginForm("myMethod", "Home", FormMethod.Post, new { id = @item.JobId })){
}
public class Organization {
@Id
@Column(name="org_id")
@GeneratedValue
private int id;
@Column(name="org_name")
private String name;
@Column(name="org_office_address1")
private String address1;
@Column(name="org_office_addres2")
private String address2;
@Column(name="city")
private String city;
@Column(name="state")
private String state;
@Column(name="country")
private String country;
@JsonIgnore
@OneToOne
@JoinColumn(name="pkg_id")
private int pkgId;
public int getPkgId() {
return pkgId;
}
public void setPkgId(int pkgId) {
this.pkgId = pkgId;
}
public String getCountry() {
return country;
}
public void setCountry(String country) {
this.country = country;
}
@Column(name="pincode")
private String pincode;
@OneToMany(mappedBy = "organization", cascade=CascadeType.ALL, fetch = FetchType.EAGER)
private Set<OrganizationBranch> organizationBranch = new HashSet<OrganizationBranch>(0);
@Column(name="status")
private String status = "ACTIVE";
@Column(name="project_id")
private int redmineProjectId;
public int getRedmineProjectId() {
return redmineProjectId;
}
public void setRedmineProjectId(int redmineProjectId) {
this.redmineProjectId = redmineProjectId;
}
public String getStatus() {
return status;
}
public void setStatus(String status) {
this.status = status;
}
public Set<OrganizationBranch> getOrganizationBranch() {
return organizationBranch;
}
public void setOrganizationBranch(Set<OrganizationBranch> organizationBranch) {
this.organizationBranch = organizationBranch;
}
public int getId() {
return id;
}
public void setId(int id) {
this.id = id;
}
public String getName() {
return name;
}
public void setName(String name) {
this.name = name;
}
public String getAddress1() {
return address1;
}
public void setAddress1(String address1) {
this.address1 = address1;
}
public String getAddress2() {
return address2;
}
public void setAddress2(String address2) {
this.address2 = address2;
}
public String getCity() {
return city;
}
public void setCity(String city) {
this.city = city;
}
public String getState() {
return state;
}
public void setState(String state) {
this.state = state;
}
public String getPincode() {
return pincode;
}
public void setPincode(String pincode) {
this.pincode = pincode;
}
}
You change the private int pkgId line in change datatype int to primitive class name or add annotation @autowired
If you don't want to install extra packages, ctypes
can get the job done as well.
import ctypes
CF_TEXT = 1
kernel32 = ctypes.windll.kernel32
kernel32.GlobalLock.argtypes = [ctypes.c_void_p]
kernel32.GlobalLock.restype = ctypes.c_void_p
kernel32.GlobalUnlock.argtypes = [ctypes.c_void_p]
user32 = ctypes.windll.user32
user32.GetClipboardData.restype = ctypes.c_void_p
def get_clipboard_text():
user32.OpenClipboard(0)
try:
if user32.IsClipboardFormatAvailable(CF_TEXT):
data = user32.GetClipboardData(CF_TEXT)
data_locked = kernel32.GlobalLock(data)
text = ctypes.c_char_p(data_locked)
value = text.value
kernel32.GlobalUnlock(data_locked)
return value
finally:
user32.CloseClipboard()
print(get_clipboard_text())
import java.io.File;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.RandomAccessFile;
import java.util.UUID;
import android.content.Context;
public class Util {
// ===========================================================
//
// ===========================================================
private static final String INSTALLATION = "INSTALLATION";
public synchronized static boolean isFirstLaunch(Context context) {
String sID = null;
boolean launchFlag = false;
if (sID == null) {
File installation = new File(context.getFilesDir(), INSTALLATION);
try {
if (!installation.exists()) {
launchFlag = true;
writeInstallationFile(installation);
}
sID = readInstallationFile(installation);
} catch (Exception e) {
throw new RuntimeException(e);
}
}
return launchFlag;
}
private static String readInstallationFile(File installation) throws IOException {
RandomAccessFile f = new RandomAccessFile(installation, "r");// read only mode
byte[] bytes = new byte[(int) f.length()];
f.readFully(bytes);
f.close();
return new String(bytes);
}
private static void writeInstallationFile(File installation) throws IOException {
FileOutputStream out = new FileOutputStream(installation);
String id = UUID.randomUUID().toString();
out.write(id.getBytes());
out.close();
}
}
> Usage (in class extending android.app.Activity)
Util.isFirstLaunch(this);
This is kind of a stupid mistake to make, but having an extra comma at the end of the field declaration line in the model class, makes the line have no effect.
It happens when you copy paste the def. from the migration, which itself is defined as an array.
Though maybe this would help someone :-)
Both representations are useful. I had used singular for convenience for quite some time, inflection can be difficult. My experience in developing strictly singular REST APIs, the developers consuming the endpoint lack certainty in what the shape of the result may be. I now prefer to use the term that best describes the shape of the response.
If all of your resources are top level, then you can get away with singular representations. Avoiding inflection is a big win.
If you are doing any sort of deep linking to represent queries on relations, then developers writing against your API can be aided by having a stricter convention.
My convention is that each level of depth in a URI is describing an interaction with the parent resource, and the full URI should implicitly describe what is being retrieved.
Suppose we have the following model.
interface User {
<string>id;
<Friend[]>friends;
<Manager>user;
}
interface Friend {
<string>id;
<User>user;
...<<friendship specific props>>
}
If I needed to provide a resource that allows a client to get the manager of a particular friend of a particular user, it might look something like:
GET /users/{id}/friends/{friendId}/manager
The following are some more examples:
GET /users
- list the user resources in the global users collectionPOST /users
- create a new user in the global users collectionGET /users/{id}
- retrieve a specific user from the global users collectionGET /users/{id}/manager
- get the manager of a specific userGET /users/{id}/friends
- get the list of friends of a userGET /users/{id}/friends/{friendId}
- get a specific friend of a userLINK /users/{id}/friends
- add a friend association to this userUNLINK /users/{id}/friends
- remove a friend association from this userNotice how each level maps to a parent that can be acted upon. Using different parents for the same object is counterintuitive. Retrieving a resource at GET /resource/123
leaves no indication that creating a new resource should be done at POST /resources
Use BigDecimal
:
new BigDecimal(theInputString);
It retains all decimal digits. And you are sure of the exact representation since it uses decimal base, not binary base, to store the precision/scale/etc.
And it is not subject to precision loss like float
or double
are, unless you explicitly ask it to.
I wanted this:
MapVC is a Map in full screen.
When I press a button, it opens PopupVC (not in full screen) above the map.
When I press a button in PopupVC, it returns to MapVC, and then I want to execute viewDidAppear.
I did this:
MapVC.m: in the button action, a segue programmatically, and set delegate
- (void) buttonMapAction{
PopupVC *popvc = [self.storyboard instantiateViewControllerWithIdentifier:@"popup"];
popvc.delegate = self;
[self presentViewController:popvc animated:YES completion:nil];
}
- (void)dismissAndPresentMap {
[self dismissViewControllerAnimated:NO completion:^{
NSLog(@"dismissAndPresentMap");
//When returns of the other view I call viewDidAppear but you can call to other functions
[self viewDidAppear:YES];
}];
}
PopupVC.h: before @interface, add the protocol
@protocol PopupVCProtocol <NSObject>
- (void)dismissAndPresentMap;
@end
after @interface, a new property
@property (nonatomic,weak) id <PopupVCProtocol> delegate;
PopupVC.m:
- (void) buttonPopupAction{
//jump to dismissAndPresentMap on Map view
[self.delegate dismissAndPresentMap];
}
Hash map doesn't preserves the insertion order.
Example. Hashmap
If you are inserting keys as
1 3
5 9
4 6
7 15
3 10
It can store it as
4 6
5 9
3 10
1 3
7 15
Linked Hashmap preserves the insertion order.
Example.
If you are inserting keys
1 3
5 9
4 6
7 15
3 10
It will store it as
1 3
5 9
4 6
7 15
3 10
same as we insert.
Tree map stores the vales in Increasing Order Of Keys.
Example.
If you are inserting keys
1 3
5 9
4 6
7 15
3 10
It will store it as
1 3
3 10
4 6
5 9
7 15
The server SHOULD put double quotes around the filename, as mentioned by @cusman and @Touko in their replies.
For example:
Response.AddHeader("Content-Disposition", "attachment;filename=\"" + filename + "\"");
sudo chown -R yourname:www-data cake
then
sudo chmod -R g+s cake
First command changes owner and group.
Second command adds s attribute which will keep new files and directories within cake having the same group permissions.
Use the constructor for appending material to the file:
FileOutputStream(File file, boolean append)
Creates a file output stream to write to the file represented by the specified File object.
So to append to a file say "abc.txt" use
FileOutputStream fos=new FileOutputStream(new File("abc.txt"),true);
"final" also allows a compiler optimization to bypass the indirect call:
class IAbstract
{
public:
virtual void DoSomething() = 0;
};
class CDerived : public IAbstract
{
void DoSomething() final { m_x = 1 ; }
void Blah( void ) { DoSomething(); }
};
with "final", the compiler can call CDerived::DoSomething()
directly from within Blah()
, or even inline. Without it, it has to generate an indirect call inside of Blah()
because Blah()
could be called inside a derived class which has overridden DoSomething()
.
This can also be achieved by Ctrl+WindowsBtn+Alt+L. This will be important to some people,because in some Virtual Machines, Ctrl+Alt+L can log you out.
I heartily recommended dbVis. The client runs on Mac, Windows and Linux and supports a variety of database servers, including PostgreSQL.
I think this is the most reliable way to get the desktop path which isn't always the same as the username.
MsgBox CreateObject("WScript.Shell").specialfolders("Desktop")
I've used angular.element($(".ng-scope")).scope();
in the past and it works great. Only good if you have only one app scope on the page, or you can do something like:
angular.element($("div[ng-controller=controllerName]")).scope();
or angular.element(document.getElementsByClassName("ng-scope")).scope();
//To show xml tags in table columns you will have to encode the tags first
function htmlEncode(value) {
//create a in-memory div, set it's inner text(which jQuery automatically encodes)
//then grab the encoded contents back out. The div never exists on the page.
return $('<div/>').text(value).html();
}
html = htmlEncode(html)
Add z-index:-9999;
to this method, or it will cover your top bar if you have 1
.
Here is my solution
-- Create the maximum number of words we want to pick (indexes in n)
with recursive n(i) as (
select
1 i
union all
select i+1 from n where i < 1000
)
select distinct
s.id,
s.oaddress,
-- n.i,
-- use the index to pick the nth word, the last words will always repeat. Remove the duplicates with distinct
if(instr(reverse(trim(substring_index(s.oaddress,' ',n.i))),' ') > 0,
reverse(substr(reverse(trim(substring_index(s.oaddress,' ',n.i))),1,
instr(reverse(trim(substring_index(s.oaddress,' ',n.i))),' '))),
trim(substring_index(s.oaddress,' ',n.i))) oth
from
app_schools s,
n
http://www.quirksmode.org/js/cookies.html
update would just be resetting it using createCookie
function createCookie(name,value,days) {
if (days) {
var date = new Date();
date.setTime(date.getTime() + (days * 24 * 60 * 60 *1000));
var expires = "; expires=" + date.toGMTString();
} else {
var expires = "";
}
document.cookie = name + "=" + value + expires + "; path=/";
}
function readCookie(name) {
var nameEQ = name + "=";
var ca = document.cookie.split(';');
for(var i=0;i < ca.length;i++) {
var c = ca[i];
while (c.charAt(0)==' ') {
c = c.substring(1,c.length);
}
if (c.indexOf(nameEQ) == 0) {
return c.substring(nameEQ.length,c.length);
}
}
return null;
}
function eraseCookie(name) {
createCookie(name,"",-1);
}
You might also try fixing the hosts file.
Keep the vhost file with the fully qualified domain and add the hostname in the hosts file /etc/hosts (debian)
ip.ip.ip.ip name name.domain.com
After restarting apache2, the error should be gone.
<table class="table border">
<thead>
<tr>
<ng-container *ngFor="let column of columns; let i = index">
<th>{{ column }}</th>
</ng-container>
</tr>
</thead>
<tbody>
<tr *ngFor="let row of groups;let i = index">
<td>{{row.name}}</td>
<td>{{row.items}}</td>
<td >
<span class="status" *ngFor="let item of row.Status | slice:0:2;let j = index">
{{item.name}}
</span><span *ngIf = "i < 2" class="dots" (mouseenter) ="onHover(i)" (mouseleave) ="onHover(-1)">.....</span> <span [hidden] ="test" *ngIf = "i == hoverIndex" class="hover-details"><span *ngFor="let item of row.Status;let j = index">
{{item.name}}
</span></span>
</td>
</tr>
</tbody>
</table>
<p *ngFor="let group of usersg"><input type="checkbox" [checked]="isChecked(group.id)" value="{{group.id}}" />{{group.name}}</p>
<p><select [(ngModel)]="usersr_selected.id">
<option *ngFor="let role of usersr" value="{{role.id}}">{{role.name}}</option>
</select></p>
import { Component, OnInit } from '@angular/core';
import { CommonserviceService } from './../utilities/services/commonservice.service';
import { FormBuilder, FormGroup, Validators } from '@angular/forms';
@Component({
selector: 'app-home',
templateUrl: './home.component.html',
styleUrls: ['./home.component.css']
})
export class HomeComponent implements OnInit {
getListData: any;
dataGroup: FormGroup;
selectedGroups: string[];
submitted = false;
usersg_checked:any;
usersr_selected:any;
dotsh:any;
hoverIndex:number = -1;
groups:any;
test:any;
constructor(private formBuilder: FormBuilder) {
}
onHover(i:number){
this.hoverIndex = i;
}
columns = ["name", "Items","status"];
public usersr = [{
"id": 1,
"name": "test1"
}, {
"id": 2,
"name": "test2",
}];
ngOnInit() {
this.test = false;
this.groups=[{
"id": 1,
"name": "pencils",
"items": "red pencil",
"Status": [{
"id": 1,
"name": "green"
}, {
"id": 2,
"name": "red"
}, {
"id": 3,
"name": "yellow"
}],
"loc": [{
"id": 1,
"name": "loc 1"
}, {
"id": 2,
"name": "loc 2"
}, {
"id": 3,
"name": "loc 3"
}]
},
{
"id": 2,
"name": "rubbers",
"items": "big rubber",
"Status": [{
"id": 1,
"name": "green"
}, {
"id": 2,
"name": "red"
}],
"loc": [{
"id": 1,
"name": "loc 2"
}, {
"id": 2,
"name": "loc 3"
}]
},
{
"id": 3,
"name": "rubbers1",
"items": "big rubber1",
"Status": [{
"id": 1,
"name": "green"
}],
"loc": [{
"id": 1,
"name": "loc 2"
}, {
"id": 2,
"name": "loc 3"
}]
}
];
this.dotsh = false;
console.log(this.groups.length);
this.usersg_checked = [{
"id": 1,
"name": "test1"
}, {
"id": 2,
"name": "test2",
}];
this.usersr_selected = {"id":1,"name":"test2"};;
this.selectedGroups = [];
this.dataGroup = this.formBuilder.group({
email: ['', Validators.required]
});
}
isChecked(id) {
console.log(this.usersg_checked);
return this.usersg_checked.some(item => item.id === id);
}
get f() { return this.dataGroup.controls; }
onCheckChange(event) {
if (event.target.checked) {
this.selectedGroups.push(event.target.value);
} else {
const index = this.selectedGroups.findIndex(item => item === event.target.value);
if (index !== -1) {
this.selectedGroups.splice(index, 1);
}
}
}
getFormData(value){
this.submitted = true;
// stop here if form is invalid
if (this.dataGroup.invalid) {
return;
}
value['groups'] = this.selectedGroups;
console.log(value);
}
}
.status{
border: 1px solid;
border-radius: 4px;
padding: 0px 10px;
margin-right: 10px;
}
.hover-details{
position: absolute;
border: 1px solid;
padding: 10px;
width: 164px;
text-align: left;
border-radius: 4px;
}
.dots{
position:relative;
}
Use a wildcard (*
) to match multiple files.
For example, the command below will delete all files with names beginning with abc.log.2012-03-
.
rm -f abc.log.2012-03-*
I'd recommend running ls abc.log.2012-03-*
to list the files so that you can see what you are going to delete before running the rm
command.
For more details see the Bash man page on filename expansion.
I just wrote this JavaScript code (using Prototype for DOM manipulation):
var require = (function() {
var _required = {};
return (function(url, callback) {
if (typeof url == 'object') {
// We've (hopefully) got an array: time to chain!
if (url.length > 1) {
// Load the nth file as soon as everything up to the
// n-1th one is done.
require(url.slice(0, url.length - 1), function() {
require(url[url.length - 1], callback);
});
} else if (url.length == 1) {
require(url[0], callback);
}
return;
}
if (typeof _required[url] == 'undefined') {
// Haven't loaded this URL yet; gogogo!
_required[url] = [];
var script = new Element('script', {
src: url,
type: 'text/javascript'
});
script.observe('load', function() {
console.log("script " + url + " loaded.");
_required[url].each(function(cb) {
cb.call(); // TODO: does this execute in the right context?
});
_required[url] = true;
});
$$('head')[0].insert(script);
} else if (typeof _required[url] == 'boolean') {
// We already loaded the thing, so go ahead.
if (callback) {
callback.call();
}
return;
}
if (callback) {
_required[url].push(callback);
}
});
})();
Usage:
<script src="prototype.js"></script>
<script src="require.js"></script>
<script>
require(['foo.js','bar.js'], function () {
/* Use foo.js and bar.js here */
});
</script>
You can configure TinyMCE as follows to keep the values of hidden textareas in sync as changes are made via TinyMCE editors:
tinymce.init({
selector: "textarea",
setup: function (editor) {
editor.on('change', function () {
editor.save();
});
}
});
The textarea elements will be kept up to date automatically and you won't need any extra steps before serializing forms etc.
This has been tested on TinyMCE 4.0
Demo running at: http://jsfiddle.net/9euk9/49/
Update: The code above has been updated based on DOOManiac's comment
open your http.conf file
vim /opt/lampp/etc/extra/httpd-xampp.conf
Comment "Deny from all" in the following section,
#
# New XAMPP security concept
#
<LocationMatch "^/(?i:(?:xampp|security|licenses|phpmyadmin|webalizer|server-status|server-info))">
Order deny,allow
#Deny from all
Allow from ::1 127.0.0.0/8 \
fc00::/7 10.0.0.0/8 172.16.0.0/12 192.168.0.0/16 \
fe80::/10 169.254.0.0/16
ErrorDocument 403 /error/XAMPP_FORBIDDEN.html.var
</LocationMatch>
Edit:
Try to add "Allow from all" before "ErrorDocument" line.
Hope it helps.
With ES6 you can now do it like this
Example Codepen URl to load
const iframe = '<iframe height="265" style="width: 100%;" scrolling="no" title="fx." src="//codepen.io/ycw/embed/JqwbQw/?height=265&theme-id=0&default-tab=js,result" frameborder="no" allowtransparency="true" allowfullscreen="true">See the Pen <a href="https://codepen.io/ycw/pen/JqwbQw/">fx.</a> by ycw(<a href="https://codepen.io/ycw">@ycw</a>) on <a href="https://codepen.io">CodePen</a>.</iframe>';
A function component to load Iframe
function Iframe(props) {
return (<div dangerouslySetInnerHTML={ {__html: props.iframe?props.iframe:""}} />);
}
Usage:
import React from "react";
import ReactDOM from "react-dom";
function App() {
return (
<div className="App">
<h1>Iframe Demo</h1>
<Iframe iframe={iframe} />,
</div>
);
}
const rootElement = document.getElementById("root");
ReactDOM.render(<App />, rootElement);
Edit on CodeSandbox:
The subversion client itself is available on Windows. See here for certified binaries from CollabNet.
CollabNet Subversion Command-Line Client v1.6.9 (for Windows)
This installer only includes the command-line client and an auto-update component.
Even though I can't understand it's possible not to love Tortoise! :)
Note:
The above link is for newer products - you can find version 1.11.1 through 1.7.19 at Older Subversion Releases
My solution:
// jQuery plugin to prevent double submission of forms
$.fn.preventDoubleSubmission = function () {
var $form = $(this);
$form.find('[type="submit"]').click(function () {
$(this).prop('disabled', true);
$form.submit();
});
// Keep chainability
return this;
};
The problem you have found is that view
is different from your UIView
. 'view' refers to the entire view. For example your home screen is a view.
You need to clearly separate the entire 'view' your 'UIView' and your 'UILabel'
You can accomplish this by going to your storyboard, clicking on the item, Identity Inspector, and changing the Restoration ID
.
Now to access each item in your code using the restoration ID
I suggest to use Google Guava Throwables class
propagate(Throwable throwable)
Propagates throwable as-is if it is an instance of RuntimeException or Error, or else as a last resort, wraps it in a RuntimeException and then propagates.**
void bar() {
Stream<A> as = ...
as.forEach(a -> {
try {
a.foo()
} catch(Exception e) {
throw Throwables.propagate(e);
}
});
}
UPDATE:
Now that it is deprecated use:
void bar() {
Stream<A> as = ...
as.forEach(a -> {
try {
a.foo()
} catch(Exception e) {
Throwables.throwIfUnchecked(e);
throw new RuntimeException(e);
}
});
}
Here's a google chrome extension that'll allow you to download your reviews: https://chrome.google.com/webstore/detail/my-play-store-reviews/ldggikfajgoedghjnflfafiiheagngoa?hl=en
Implicit Wait: During Implicit wait if the Web Driver cannot find it immediately because of its availability, the WebDriver will wait for mentioned time and it will not try to find the element again during the specified time period. Once the specified time is over, it will try to search the element once again the last time before throwing exception. The default setting is zero. Once we set a time, the Web Driver waits for the period of the WebDriver object instance.
Explicit Wait: There can be instance when a particular element takes more than a minute to load. In that case you definitely not like to set a huge time to Implicit wait, as if you do this your browser will going to wait for the same time for every element. To avoid that situation you can simply put a separate time on the required element only. By following this your browser implicit wait time would be short for every element and it would be large for specific element.
There is something called 'locked reference' in excel which you can use for this, and you use $
symbols to lock a range. For your example, you would use:
=IF(B4<>"",B4/B$1,"")
This locks the 1
in B1
so that when you copy it to rows below, 1
will remain the same.
If you use $B$1
, the range will not change when you copy it down a row or across a column.
I also did a little workaround of my own.
I created a (dropdownOpen) event which I listen to at my ng-select element component and call a function which will close all the other SelectComponent's opened apart from the currently opened SelectComponent.
I modified one function inside the select.ts file like below to emit the event:
private open():void {
this.options = this.itemObjects
.filter((option:SelectItem) => (this.multiple === false ||
this.multiple === true && !this.active.find((o:SelectItem) => option.text === o.text)));
if (this.options.length > 0) {
this.behavior.first();
}
this.optionsOpened = true;
this.dropdownOpened.emit(true);
}
In the HTML I added an event listener for (dropdownOpened):
<ng-select #elem (dropdownOpened)="closeOtherElems(elem)"
[multiple]="true"
[items]="items"
[disabled]="disabled"
[isInputAllowed]="true"
(data)="refreshValue($event)"
(selected)="selected($event)"
(removed)="removed($event)"
placeholder="No city selected"></ng-select>
This is my calling function on event trigger inside the component having ng2-select tag:
@ViewChildren(SelectComponent) selectElem :QueryList<SelectComponent>;
public closeOtherElems(element){
let a = this.selectElem.filter(function(el){
return (el != element)
});
a.forEach(function(e:SelectComponent){
e.closeDropdown();
})
}
it would be helpful to know if you use linux or windows. in linux the settings are located in ~/.smartgit/3. You could try to remove this folder. Imho this is also worth a try in Windows.
The other answers so far have a lot of technical information. I will try to answer, as requested, in simple terms.
Serialization is what you do to an instance of an object if you want to dump it to a raw buffer, save it to disk, transport it in a binary stream (e.g., sending an object over a network socket), or otherwise create a serialized binary representation of an object. (For more info on serialization see Java Serialization on Wikipedia).
If you have no intention of serializing your class, you can add the annotation just above your class @SuppressWarnings("serial")
.
If you are going to serialize, then you have a host of things to worry about all centered around the proper use of UUID. Basically, the UUID is a way to "version" an object you would serialize so that whatever process is de-serializing knows that it's de-serializing properly. I would look at Ensure proper version control for serialized objects for more information.
You can open the file using the ios::ate
flag (and ios::binary
flag), so the tellg()
function will give you directly the file size:
ifstream file( "example.txt", ios::binary | ios::ate);
return file.tellg();
The $.ajax() function returns a XMLHttpRequest object. Store that in a variable that's accessible from the Submit button's "OnClick" event. When a submit click is processed check to see if the XMLHttpRequest variable is:
1) null, meaning that no request has been sent yet
2) that the readyState value is 4 (Loaded). This means that the request has been sent and returned successfully.
In either of those cases, return true and allow the submit to continue. Otherwise return false to block the submit and give the user some indication of why their submit didn't work. :)
um responsive is simple
display:table-cell
max-width:700px
do {display:block; width:100%; clear:both}
and that's it no absolute divs ever; divs needs to be 100% then max-width: - desired width -
for inner framming. A true responsive sites has less than 9 lines of css anything passed that you are in a world of shit and over complicated things.
PS : reset.css
style sheets are what makes css blinds there was a logical reason why they gave default styles in the first place.
You can use the build in __file__
variable. It contains the path of the current file. I would implement getBaseOfProject in a module in the root of your project. There I would get the path part of __file__
and would return that. This method can then be used everywhere in your project.
function js_to_as( str ){
if (me && me.onChange)
me.onChange(str);
}
Try this test:
any(substring in string for substring in substring_list)
It will return True
if any of the substrings in substring_list
is contained in string
.
Note that there is a Python analogue of Marc Gravell's answer in the linked question:
from itertools import imap
any(imap(string.__contains__, substring_list))
In Python 3, you can use map
directly instead:
any(map(string.__contains__, substring_list))
Probably the above version using a generator expression is more clear though.
You can still use NSDictionaries in Swift:
For Swift 4
var nsDictionary: NSDictionary?
if let path = Bundle.main.path(forResource: "Config", ofType: "plist") {
nsDictionary = NSDictionary(contentsOfFile: path)
}
For Swift 3+
if let path = Bundle.main.path(forResource: "Config", ofType: "plist"),
let myDict = NSDictionary(contentsOfFile: path){
// Use your myDict here
}
And older versions of Swift
var myDict: NSDictionary?
if let path = NSBundle.mainBundle().pathForResource("Config", ofType: "plist") {
myDict = NSDictionary(contentsOfFile: path)
}
if let dict = myDict {
// Use your dict here
}
The NSClasses are still available and perfectly fine to use in Swift. I think they'll probably want to shift focus to swift soon, but currently the swift APIs don't have all the functionality of the core NSClasses.
Here is what I came up with. I was having major problems with this and believe I am in MVC 6 now but this may be helpful to someone even myself in the future..
//The issue was that Reqest.Form Request.Querystring and Request not working in MVC the solution is to use Context.Request.Form and also making sure the form has been submitted otherwise null reference or context issue bug will show up.
if(Context.Request.ContentLength != null)
{
String StartDate = Context.Request.Form["StartMonth"].ToString();
String EndMonth = Context.Request.Form["EndMonth"].ToString();
// Vendor
}
Since the question is not directly mentioning Visual Studio, I will post how to do this in JetBrains Rider.
From context menu
With shortcut
Taking the top answer, as well as the suggestions from its comments, and modifying it to use SecureString instead of String, test for all control keys, and not error or write an extra "*" to the screen when the password length is 0, my solution is:
public static SecureString getPasswordFromConsole(String displayMessage) {
SecureString pass = new SecureString();
Console.Write(displayMessage);
ConsoleKeyInfo key;
do {
key = Console.ReadKey(true);
// Backspace Should Not Work
if (!char.IsControl(key.KeyChar)) {
pass.AppendChar(key.KeyChar);
Console.Write("*");
} else {
if (key.Key == ConsoleKey.Backspace && pass.Length > 0) {
pass.RemoveAt(pass.Length - 1);
Console.Write("\b \b");
}
}
}
// Stops Receving Keys Once Enter is Pressed
while (key.Key != ConsoleKey.Enter);
return pass;
}
Since -f
caused another problem, I developed another solution.
The -f
flag does not solved my problem because my onbuild
image looks for a file in a folder and had to call like this:
-f foo/bar/Dockerfile foo/bar
instead of
-f foo/bar/Dockerfile .
Also note that this is only solution for some cases as -f
flag
There is always a proper syntax for every language. Similarly SQL(Structured Query Language) has also specific syntax for update query which we have to follow if we want to use update query. Otherwise it will not give the expected results.
The passwords cannot be decrypted as will makes a vulnerability for users. So, you can simply use password_verify()
method to compare the passwords.
if(password_verify($upass, $userRow['user_pass'])){
//code for redirecting to login screen }
where, $upass
is password entered by user and $userRow['user_pass']
is user_pass field in database which is encrypted by password_hash()
function.
You can do this with pure CSS but you will need to hard code the offset scroll amounts, which may not be ideal should you be changing page content- or should dimensions of your content change on say window resize.
You're likely best placed to use e.g. jQuery, specifically:
$('html, body').stop().animate({
scrollTop: element.offset().top
}, 1000);
A complete implementation may be:
$('#up, #down').on('click', function(e){
e.preventDefault();
var target= $(this).get(0).id == 'up' ? $('#down') : $('#up');
$('html, body').stop().animate({
scrollTop: target.offset().top
}, 1000);
});
Where element
is the target element to scroll to and 1000
is the delay in ms before completion.
The benefit being, no matter what changes to your content dimensions, the function will not need to be altered.
For IntelliJ IDEA 2017.2 I did the following to fix this issue: Go to your project structure Now go to SDKs under platform settings and click the green add button. Add your JDK path. In my case it was this path C:\Program Files\Java\jdk1.8.0_144 Now Just go Project under Project settings and select the project SDK.
Use the code below it worked for me.
MediaPlayer mp = new MediaPlayer();
mp.setDataSource("/mnt/sdcard/yourdirectory/youraudiofile.mp3");
mp.prepare();
mp.start();
You can do that without an I/O redirection:
sed -i 's/$/\n/' filename
You can also use this command to append a newline to a list of files:
find dir -name filepattern | xargs sed -i 's/$/\n/' filename
For echo
, some shells implement it as a shell builtin command. It might not accept the -e
option. If you still want to use echo
, try to find where the echo
binary file is, using which echo
. In most cases, it is located in /bin/echo
, so you can use /bin/echo -e "\n"
to echo a new line.
for (int j=0; j<test.length; j++) {
System.out.format("%02X ", test[j]);
}
System.out.println();
Use JQuery. You need to set-up a click event on your button which will toggle the visibility of your wizard div.
$('#btn').click(function() {
$('#wizard').toggle();
});
Refer to the JQuery website for more information.
This can also be done without JQuery. Using only standard JavaScript:
<script type="text/javascript">
function toggle_visibility(id) {
var e = document.getElementById(id);
if(e.style.display == 'block')
e.style.display = 'none';
else
e.style.display = 'block';
}
</script>
Then add onclick="toggle_visibility('id_of_element_to_toggle');"
to the button that is used to show and hide the div.
The only command helped me to cleanup all gems and ignores default gems, which can't be uninstalled
for x in `gem list --no-versions`; do gem uninstall $x -a -x -I; done
Custom Format for using . is not recognised by Excel, hence that could be the reason it could not sort.
Steps to mitigate; change the format to dd/mm/yyyy, sort as required , change the format to dd.mm.yyyy
In my case, when I'm in an activity that extends from AppCompatActivity
, it did not work(Activity) getApplicationContext ()
, I just putthis
in its place.
You can do it using clone()
function of jQuery, Accepted answer is ok but i am providing alternative to it, you can use append()
, but it works only if you can change html slightly as below:
$(document).ready(function(){_x000D_
$('#clone_btn').click(function(){_x000D_
$("#car_parent").append($("#car2").clone());_x000D_
});_x000D_
});
_x000D_
.car-well{_x000D_
border:1px solid #ccc;_x000D_
text-align: center;_x000D_
margin: 5px;_x000D_
padding:3px;_x000D_
font-weight:bold;_x000D_
}
_x000D_
<!DOCTYPE html>_x000D_
<html>_x000D_
<head>_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>_x000D_
</head>_x000D_
<body>_x000D_
<div id="car_parent">_x000D_
<div id="car1" class="car-well">Normal div</div>_x000D_
<div id="car2" class="car-well" style="background-color:lightpink;color:blue">Clone div</div>_x000D_
<div id="car3" class="car-well">Normal div</div>_x000D_
<div id="car4" class="car-well">Normal div</div>_x000D_
<div id="car5" class="car-well">Normal div</div>_x000D_
</div>_x000D_
<button type="button" id="clone_btn" class="btn btn-primary">Clone</button>_x000D_
_x000D_
</body>_x000D_
</html>
_x000D_
function getMethods(obj)
{
var res = [];
for(var m in obj) {
if(typeof obj[m] == "function") {
res.push(m)
}
}
return res;
}
I know this is an old question, but looking at the original question, it looks like the user just wanted to run a command as root, that's what I need to do when I was searching for an answer and stumbled across the question.
So this one is worth knowing in my opinion:
vagrant ssh servername -c "echo vagrant | sudo -S shutdown 0"
vagrant
is the password being echoed into the the sudo command, because as we all know, the vagrant account has sudo privileges and when you sudo, you need to specify the password of the user account, not root..and of course by default, the vagrant user's password is vagrant
!
By default you need root privileges to shutdown so I guess doing a shutdown is a good test.
Obviously you don't need to specify a server name if there is only one for that vagrant environment. Also, we're talking about local vagrant virtual machine to the host, so there isn't really any security issue that I can see.
Hope this helps.
Here are two more possibilities:
As long as you are using at least version 3.0 of EL, then you can import constants into your page as follows:
<%@ page import="org.example.Status" %>
<c:when test="${dp.status eq Status.VALID}">
However, some IDEs don't understand this yet (e.g. IntelliJ) so you won't get any warnings if you make a typo, until runtime.
This would be my preferred method once it gets proper IDE support.
You could just add getters to your enum.
public enum Status {
VALID("valid"), OLD("old");
private final String val;
Status(String val) {
this.val = val;
}
public String getStatus() {
return val;
}
public boolean isValid() {
return this == VALID;
}
public boolean isOld() {
return this == OLD;
}
}
Then in your JSP:
<c:when test="${dp.status.valid}">
This is supported in all IDEs and will also work if you can't use EL 3.0 yet. This is what I do at the moment because it keeps all the logic wrapped up into my enum.
Also be careful if it is possible for the variable storing the enum to be null. You would need to check for that first if your code doesn't guarantee that it is not null:
<c:when test="${not empty db.status and dp.status.valid}">
I think this method is superior to those where you set an intermediary value in the JSP because you have to do that on each page where you need to use the enum. However, with this solution you only need to declare the getter once.
This isn't ideal, but I had written a lot of code and defined strings in a way similar to the method used in the question. The accepted solution required me to refactor a lot of the code so instead, I replaced every \n
with "$'\n'"
and this worked for me.
echo -e "/thing_to_delete\ndd\033:x\n" | vim file_to_edit.txt
From the link above:
Several of these types can be modified using the keywords signed, unsigned, short, and long. When one of these type modifiers is used by itself, a data type of int is assumed
This means that you can assume the author is using ints.
Your main() method is static, but it is referencing two non-static members: con2 and getConnectionUrl2(). You need to do one of three things:
1) Make con2 and getConnectionUrl2() static.
2) Inside main(), create an instance of class testconnect and access con2 and getConnectionUrl2() off of that.
3) Break out a different class to hold con2 and getConnectionUrl2() so that testconnect only has main in it. It will still need to instantiate the different class and call the methods off that.
Option #3 is the best option. #1 is the worst.
But, you cannot access non-static members from within a static method.
The above methods work well for small images, but when you try to resize a very large image, you will quickly run out of memory and crash the app. A much better way is to use CGImageSourceCreateThumbnailAtIndex
to resize the image without completely decoding it first.
If you have the path to the image you want to resize, you can use this:
- (void)resizeImageAtPath:(NSString *)imagePath {
// Create the image source (from path)
CGImageSourceRef src = CGImageSourceCreateWithURL((__bridge CFURLRef) [NSURL fileURLWithPath:imagePath], NULL);
// To create image source from UIImage, use this
// NSData* pngData = UIImagePNGRepresentation(image);
// CGImageSourceRef src = CGImageSourceCreateWithData((CFDataRef)pngData, NULL);
// Create thumbnail options
CFDictionaryRef options = (__bridge CFDictionaryRef) @{
(id) kCGImageSourceCreateThumbnailWithTransform : @YES,
(id) kCGImageSourceCreateThumbnailFromImageAlways : @YES,
(id) kCGImageSourceThumbnailMaxPixelSize : @(640)
};
// Generate the thumbnail
CGImageRef thumbnail = CGImageSourceCreateThumbnailAtIndex(src, 0, options);
CFRelease(src);
// Write the thumbnail at path
CGImageWriteToFile(thumbnail, imagePath);
}
More details here.
Do you absolutely have to use java.util.Date
? I would thoroughly recommend that you use Joda Time or the java.time
package from Java 8 instead. In particular, while Date and Calendar always represent a particular instant in time, with no such concept as "just a date", Joda Time does have a type representing this (LocalDate
). Your code will be much clearer if you're able to use types which represent what you're actually trying to do.
There are many, many other reasons to use Joda Time or java.time
instead of the built-in java.util
types - they're generally far better APIs. You can always convert to/from a java.util.Date
at the boundaries of your own code if you need to, e.g. for database interaction.
use grep [n]ame to remove that grep -v name this is first... Sec using xargs in the way how it is up there is wrong to rnu whatever it is piped you have to use -i ( interactive mode) otherwise you may have issues with the command.
ps axf | grep | grep -v grep | awk '{print "kill -9 " $1}' ? ps aux |grep [n]ame | awk '{print "kill -9 " $2}' ? isnt that better ?
Update your user, domain, and proxy information in cntlm.ini
, then test your proxy with this command (run in your Cntlm installation folder):
cntlm -c cntlm.ini -I -M http://google.ro
It will ask for your password, and hopefully print your required authentication information, which must be saved in your cntlm.ini
Sample cntlm.ini
:
Username user
Domain domain
# provide actual value if autodetection fails
# Workstation pc-name
Proxy my_proxy_server.com:80
NoProxy 127.0.0.*, 192.168.*
Listen 127.0.0.1:54321
Listen 192.168.1.42:8080
Gateway no
SOCKS5Proxy 5000
# provide socks auth info if you want it
# SOCKS5User socks-user:socks-password
# printed authentication info from the previous step
Auth NTLMv2
PassNTLMv2 98D6986BCFA9886E41698C1686B58A09
Note: on linux the config file is cntlm.conf
What I like about it is that it aligns the unit-of-work (as the user sees it - i.e. a page submit) with the unit-of-work in the ORM sense.
Therefore, you can make the entire page submission transactional, which you could not do if you were exposing CRUD methods with each creating a new context.
You could check out JBoss Tools plugin.
Check if the Node
is a Dom Element
, cast, and call getElementsByTagName()
Node doc = docs.item(i);
if(doc instanceof Element) {
Element docElement = (Element)doc;
...
cell = doc.getElementsByTagName("aoo").item(0);
}
Oracle XE With Application Express.
In my case the error was System.BadImageFormatException: Could not load file or assembly 'vjslib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies.
It was solved by installing vjredist 64 from here.
A string needs no encoding. It is simply a sequence of Unicode characters.
You need to encode when you want to turn a String into a sequence of bytes. The charset the you choose (UTF-8, cp1255, etc.) determines the Character->Byte mapping. Note that a character is not necessarily translated into a single byte. In most charsets, most Unicode characters are translated to at least two bytes.
Encoding of a String is carried out by:
String s1 = "some text";
byte[] bytes = s1.getBytes("UTF-8"); // Charset to encode into
You need to decode when you have ? sequence of bytes and you want to turn them into a String. When y?u d? that you need to specify, again, the charset with which the byt?s were originally encoded (otherwise you'll end up with garbl?d t?xt).
Decoding:
String s2 = new String(bytes, "UTF-8"); // Charset with which bytes were encoded
If you want to understand this better, a great text is "The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!)"
Aside from looking into root cause issues like file leaks, etc. in order to do a legitimate increase the "open files" limit and have that persist across reboots, consider editing
/etc/security/limits.conf
by adding something like this
jetty soft nofile 2048
jetty hard nofile 4096
where "jetty" is the username in this case. For more details on limits.conf, see http://linux.die.net/man/5/limits.conf
log off and then log in again and run
ulimit -n
to verify that the change has taken place. New processes by this user should now comply with this change. This link seems to describe how to apply the limit on already running processes but I have not tried it.
The default limit 1024 can be too low for large Java applications.
The reason you are getting the the IOException is because you are not catching the IOException of your countLines method. You'll want to do something like this:
public static void main(String[] args) {
int lines = 0;
// TODO - Need to get the filename to populate sFileName. Could
// come from the command line arguments.
try {
lines = LineCounter.countLines(sFileName);
}
catch(IOException ex){
System.out.println (ex.toString());
System.out.println("Could not find file " + sFileName);
}
if(lines > 0) {
// Do rest of program.
}
}
I would recommend ClosedXML -
You can turn a DataTable into an Excel worksheet with some very readable code:
XLWorkbook wb = new XLWorkbook();
DataTable dt = GetDataTableOrWhatever();
wb.Worksheets.Add(dt,"WorksheetName");
The developer is responsive and helpful. The project is actively developed, and the documentation is superb.
Most Easiest Way
$url = 'https://www.youtube.com/embed/ROipDjNYK4k?rel=0&autoplay=1';
$url_arr = parse_url($url);
$query = $url_arr['query'];
print $url = str_replace(array($query,'?'), '', $url);
//output
https://www.youtube.com/embed/ROipDjNYK4k
git config --system --unset credential.helper
then enter new password for Git remote server.
Never do a git -f
to do push
as it can result in later disastrous consequences.
You just need to do a git pull
of your local branch.
Ex:
git pull origin 'your_local_branch'
and then do a git push
Two options:
for (let item in MotifIntervention) {
if (isNaN(Number(item))) {
console.log(item);
}
}
Or
Object.keys(MotifIntervention).filter(key => !isNaN(Number(MotifIntervention[key])));
String enums look different than regular ones, for example:
enum MyEnum {
A = "a",
B = "b",
C = "c"
}
Compiles into:
var MyEnum;
(function (MyEnum) {
MyEnum["A"] = "a";
MyEnum["B"] = "b";
MyEnum["C"] = "c";
})(MyEnum || (MyEnum = {}));
Which just gives you this object:
{
A: "a",
B: "b",
C: "c"
}
You can get all the keys (["A", "B", "C"]
) like this:
Object.keys(MyEnum);
And the values (["a", "b", "c"]
):
Object.keys(MyEnum).map(key => MyEnum[key])
Or using Object.values():
Object.values(MyEnum)
Try this one. (LINK)
Private Sub CommandButton3_Click()
Dim FileExtStr As String
Dim FileFormatNum As Long
Dim xWs As Worksheet
Dim xWb As Workbook
Dim FolderName As String
Application.ScreenUpdating = False
Set xWb = Application.ThisWorkbook
DateString = Format(Now, "yyyy-mm-dd hh-mm-ss")
FolderName = xWb.Path & "\" & xWb.Name & " " & DateString
MkDir FolderName
For Each xWs In xWb.Worksheets
xWs.Copy
If Val(Application.Version) < 12 Then
FileExtStr = ".xls": FileFormatNum = -4143
Else
Select Case xWb.FileFormat
Case 51:
FileExtStr = ".xlsx": FileFormatNum = 51
Case 52:
If Application.ActiveWorkbook.HasVBProject Then
FileExtStr = ".xlsm": FileFormatNum = 52
Else
FileExtStr = ".xlsx": FileFormatNum = 51
End If
Case 56:
FileExtStr = ".xls": FileFormatNum = 56
Case Else:
FileExtStr = ".xlsb": FileFormatNum = 50
End Select
End If
xFile = FolderName & "\" & Application.ActiveWorkbook.Sheets(1).Name & FileExtStr
Application.ActiveWorkbook.SaveAs xFile, FileFormat:=FileFormatNum
Application.ActiveWorkbook.Close False
Next
MsgBox "You can find the files in " & FolderName
Application.ScreenUpdating = True
End Sub
This is a standard problem.
Note that MySQL allows you to omit columns from the GROUP BY clause, which Standard SQL does not, but you do not get deterministic results in general when you use the MySQL facility.
SELECT *
FROM Messages AS M
JOIN (SELECT To_ID, From_ID, MAX(TimeStamp) AS Most_Recent
FROM Messages
WHERE To_ID = 12345678
GROUP BY From_ID
) AS R
ON R.To_ID = M.To_ID AND R.From_ID = M.From_ID AND R.Most_Recent = M.TimeStamp
WHERE M.To_ID = 12345678
I've added a filter on the To_ID
to match what you're likely to have. The query will work without it, but will return a lot more data in general. The condition should not need to be stated in both the nested query and the outer query (the optimizer should push the condition down automatically), but it can do no harm to repeat the condition as shown.
You can get the comments of a particular method by using the ReflectionMethod class and calling ->getDocComment().
http://www.php.net/manual/en/reflectionclass.getdoccomment.php
In layman terms:- JDK = JRE + Development/debugging tools, where JDK is our complete package to work with Java, from creating compiling till running it.On the other hand JRE is just of running of code(Byte Code).
Note:- Whether we are installing JDK or JRE, JVM would come bundled with both the packages and JVM is the part where JIT compiler converts the byte code into the machine specific code.
Just read the article on JDK,JRE ,JVM and JIT
They're called indexed views in SQL Server - read these white papers for more background:
Basically, all you need to do is:
and you're done!
The tricky part is: the view has to satisfy quite a number of constraints and limitations - those are outlined in the white paper. If you do this, that's all there is. The view is being updated automatically, no maintenance needed.
Additional resources:
Just dot is working. The doctype makes a difference however as sometimes the ./ is fine as well.
<a href=".">Link to this folder</a>
I used html5webview to solve this problem.Download and put it into your project then you can code just like this.
private HTML5WebView mWebView;
String url = "SOMEURL";
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
mWebView = new HTML5WebView(this);
if (savedInstanceState != null) {
mWebView.restoreState(savedInstanceState);
} else {
mWebView.loadUrl(url);
}
setContentView(mWebView.getLayout());
}
@Override
public void onSaveInstanceState(Bundle outState) {
super.onSaveInstanceState(outState);
mWebView.saveState(outState);
}
To make the video rotatable, put android:configChanges="orientation" code into your Activity for example (Androidmanifest.xml)
<activity android:name=".ui.HTML5Activity" android:configChanges="orientation"/>
and override the onConfigurationChanged method.
@Override
public void onConfigurationChanged(Configuration newConfig) {
super.onConfigurationChanged(newConfig);
}
For me, the combination of Stuart Gathman's and Raviath's answer in this thread did the trick in Windows Server 2016 for iReport 5.6.0.
In addition, I added a symlink within C:\program files\java\jre7 to jdk8 like this:
cmd /c mklink /d "C:\program files\java\jre7\bin" "C:\Program Files\Java\jdk1.8.0_181\bin"
because iReport was constantly complaining that it could not find java.exe within C:\program files\java\jre7\bin\ - So I served it the available java.exe (in my case V8.181) under the desired path and it swallowed it gladly.
add this function to your global.asax
protected void Application_AuthenticateRequest(Object sender, EventArgs e)
{
string cookieName = FormsAuthentication.FormsCookieName;
HttpCookie authCookie = Context.Request.Cookies[cookieName];
if (authCookie == null)
{
return;
}
FormsAuthenticationTicket authTicket = null;
try
{
authTicket = FormsAuthentication.Decrypt(authCookie.Value);
}
catch
{
return;
}
if (authTicket == null)
{
return;
}
string[] roles = authTicket.UserData.Split(new char[] { '|' });
FormsIdentity id = new FormsIdentity(authTicket);
GenericPrincipal principal = new GenericPrincipal(id, roles);
Context.User = principal;
}
then you can use HttpContext.Current.User.Identity.Name to get username. hope it helps
Maybe it's better to use links
Symbolic or soft link (files or directories, more flexible and self documenting)
# Source Link
ln -s /home/jake/doc/test/2000/something /home/jake/xxx
Hard link (files only, less flexible and not self documenting)
# Source Link
ln /home/jake/doc/test/2000/something /home/jake/xxx
How to create a link to a directory
Hint: If you need not to see the link in your home you can start it with a dot . ; then it will be hidden by default then you can access it like
cd ~/.myHiddelLongDirLink
You need to check that Session["emp_num"]
is not null
before trying to convert it to a string otherwise you will get a null reference exception.
I'd go with your first example - but you could make it slightly more "elegant".
There are a couple of ways, but the ones that springs to mind are:
if (Session["emp_num"] is string)
{
}
or
if (!string.IsNullOrEmpty(Session["emp_num"] as string))
{
}
This will return null if the variable doesn't exist or isn't a string.
I've written a personal library that allows you to order by multiple values, with all the ordering done on the server.
Querybase takes in a Firebase Database Reference and an array of fields you wish to index on. When you create new records it will automatically handle the generation of keys that allow for multiple querying. The caveat is that it only supports straight equivalence (no less than or greater than).
const databaseRef = firebase.database().ref().child('people');
const querybaseRef = querybase.ref(databaseRef, ['name', 'age', 'location']);
// Automatically handles composite keys
querybaseRef.push({
name: 'David',
age: 27,
location: 'SF'
});
// Find records by multiple fields
// returns a Firebase Database ref
const queriedDbRef = querybaseRef
.where({
name: 'David',
age: 27
});
// Listen for realtime updates
queriedDbRef.on('value', snap => console.log(snap));
Did you read clang
documentation ? You're probably looking for -emit-llvm
.
I was having the same problem because I was missing the @EnableWebMvc annotation. (All of my spring configurations are annotation-based, the XML equivalent would be mvc:annotation-driven)
Both will generate the same columns when you run the migration. In rails console, you can see that this is the case:
:001 > Micropost
=> Micropost(id: integer, user_id: integer, created_at: datetime, updated_at: datetime)
The second command adds a belongs_to :user
relationship in your Micropost model whereas the first does not. When this relationship is specified, ActiveRecord will assume that the foreign key is kept in the user_id
column and it will use a model named User
to instantiate the specific user.
The second command also adds an index on the new user_id
column.
Normally virtualenv
creates environments in the current directory. Unless you're intending to create virtual environments in C:\Windows\system32
for some reason, I would use a different directory for environments.
You shouldn't need to mess with paths: use the activate
script (in <env>\Scripts
) to ensure that the Python executable and path are environment-specific. Once you've done this, the command prompt changes to indicate the environment. You can then just invoke easy_install and whatever you install this way will be installed into this environment. Use deactivate
to set everything back to how it was before activation.
Example:
c:\Temp>virtualenv myenv
New python executable in myenv\Scripts\python.exe
Installing setuptools..................done.
c:\Temp>myenv\Scripts\activate
(myenv) C:\Temp>deactivate
C:\Temp>
Notice how I didn't need to specify a path for deactivate
- activate
does that for you, so that when activated "Python" will run the Python in the virtualenv, not your system Python. (Try it - do an import sys; sys.prefix
and it should print the root of your environment.)
You can just activate a new environment to switch between environments/projects, but you'll need to specify the whole path for activate
so it knows which environment to activate. You shouldn't ever need to mess with PATH or PYTHONPATH explicitly.
If you use Windows Powershell then you can take advantage of a wrapper. On Linux, the virtualenvwrapper
(the link points to a port of this to Powershell) makes life with virtualenv
even easier.
Update: Not incorrect, exactly, but perhaps not quite in the spirit of virtualenv
. You could take a different tack: for example, if you install Django and anything else you need for your site in your virtualenv, then you could work in your project directory (where you're developing your site) with the virtualenv activated. Because it was activated, your Python would find Django and anything else you'd easy_installed into the virtual environment: and because you're working in your project directory, your project files would be visible to Python, too.
Further update: You should be able to use pip
, distribute
instead of setuptools
, and just plain python setup.py install
with virtualenv
. Just ensure you've activated an environment before installing something into it.
This was our solution for replacing master on a corporate gitHub repository while maintaining history.
push -f
to master on corporate repositories is often disabled to maintain branch history. This solution worked for us.
git fetch desiredOrigin
git checkout -b master desiredOrigin/master // get origin master
git checkout currentBranch // move to target branch
git merge -s ours master // merge using ours over master
// vim will open for the commit message
git checkout master // move to master
git merge currentBranch // merge resolved changes into master
push your branch to desiredOrigin
and create a PR
I Resolved it by cloning my project directly into Eclipse from GIT,
Initially I was cloning it at specific location on file system then importing it as existing project into Eclipse.
The way to "start" the array that you want is:
arr = np.empty((0,3), int)
Which is an empty array but it has the proper dimensionality.
>>> arr
array([], shape=(0, 3), dtype=int64)
Then be sure to append along axis 0:
arr = np.append(arr, np.array([[1,2,3]]), axis=0)
arr = np.append(arr, np.array([[4,5,6]]), axis=0)
But, @jonrsharpe is right. In fact, if you're going to be appending in a loop, it would be much faster to append to a list as in your first example, then convert to a numpy array at the end, since you're really not using numpy as intended during the loop:
In [210]: %%timeit
.....: l = []
.....: for i in xrange(1000):
.....: l.append([3*i+1,3*i+2,3*i+3])
.....: l = np.asarray(l)
.....:
1000 loops, best of 3: 1.18 ms per loop
In [211]: %%timeit
.....: a = np.empty((0,3), int)
.....: for i in xrange(1000):
.....: a = np.append(a, 3*i+np.array([[1,2,3]]), 0)
.....:
100 loops, best of 3: 18.5 ms per loop
In [214]: np.allclose(a, l)
Out[214]: True
The numpythonic way to do it depends on your application, but it would be more like:
In [220]: timeit n = np.arange(1,3001).reshape(1000,3)
100000 loops, best of 3: 5.93 µs per loop
In [221]: np.allclose(a, n)
Out[221]: True
__init__
is required to return None. You cannot (or at least shouldn't) return something else.
Try making whatever you want to return an instance variable (or function).
>>> class Foo:
... def __init__(self):
... return 42
...
>>> foo = Foo()
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: __init__() should return None
There doesn't seem to be a standardized default value. I have the feeling the default is 0
, and the timeout event left totally dependent on browser and network settings.
For IE, there is a timeout property for XMLHTTPRequests here. It defaults to null, and it says the network stack is likely to be the first to time out (which will not generate an ontimeout event by the way).
This is the easiest way to locally edit files which live on remote host where you have previously setup ssh to remote IP
# issue on local box
sudo apt-get install sshfs # on local host install sshfs ( linux )
# on local box create secure mount of remote directory
export REMOTE_IP=107.170.58.249 # remote host IP
sshfs myremoteuserid@${REMOTE_IP}:/your/remote/dir /your/local/dir # for example
Done !!!
Now on local host just start editing files ... when you list dir locally it may not list anything until you cd into subdir or list a specific file ... lazy loading ... this does not impact editing files
subl /your/local/dir/magnum_opus.go # local file edit using sublime text
so above is actually editing remote file at
/your/remote/dir/magnum_opus.go # remote file on box $REMOTE_IP
For OSX or Windows see this tut from the kind folk over on Digital Ocean
If you want the index of the element, this will do it:
int index = list.Select((item, i) => new { Item = item, Index = i })
.First(x => x.Item == search).Index;
// or
var tagged = list.Select((item, i) => new { Item = item, Index = i });
int index = (from pair in tagged
where pair.Item == search
select pair.Index).First();
You can't get rid of the lambda in the first pass.
Note that this will throw if the item doesn't exist. This solves the problem by resorting to nullable ints:
var tagged = list.Select((item, i) => new { Item = item, Index = (int?)i });
int? index = (from pair in tagged
where pair.Item == search
select pair.Index).FirstOrDefault();
If you want the item:
// Throws if not found
var item = list.First(item => item == search);
// or
var item = (from item in list
where item == search
select item).First();
// Null if not found
var item = list.FirstOrDefault(item => item == search);
// or
var item = (from item in list
where item == search
select item).FirstOrDefault();
If you want to count the number of items that match:
int count = list.Count(item => item == search);
// or
int count = (from item in list
where item == search
select item).Count();
If you want all the items that match:
var items = list.Where(item => item == search);
// or
var items = from item in list
where item == search
select item;
And don't forget to check the list for null
in any of these cases.
Or use (list ?? Enumerable.Empty<string>())
instead of list
.
Thanks to Pavel for helping out in the comments.
Depending on the device, sometimes you are getting "The folder you specified doesn't contain a compatible software" error because the first interface isn't actually the ADB interface.
Try installing it as a generic "USB composite device" instead (from the 'pick from a list' driver install option); once the standard composite driver installs it will allow Windows to communicate with the device and detect the associated ADB driver interface and install it properly.
I always use my own mod
function, defined as
int mod(int x, int m) {
return (x%m + m)%m;
}
Of course, if you're bothered about having two calls to the modulus operation, you could write it as
int mod(int x, int m) {
int r = x%m;
return r<0 ? r+m : r;
}
or variants thereof.
The reason it works is that "x%m" is always in the range [-m+1, m-1]. So if at all it is negative, adding m to it will put it in the positive range without changing its value modulo m.
In angular only one page is requested from server, that is index.html. And index.html and assets folder are on same directory. while putting image in any component give src value like assets\image.png
. This will work fine because browser will make request to server for that image and webpack will be able serve that image.
No, cross-browser form custimization is very hard if not impossible to get it right for all browsers. If you really care about the appearance of those widgets you should use a javascript implementation.
see http://www.456bereastreet.com/archive/200409/styling_form_controls/ and http://developer.yahoo.com/yui/examples/button/btn_example07.html
You can do this by registering an event handler on the document or any element you want to observe keystrokes on and examine the key related properties of the event object.
Example that works in FF and Webkit-based browsers:
document.addEventListener('keydown', function(event) {
if(event.keyCode == 37) {
alert('Left was pressed');
}
else if(event.keyCode == 39) {
alert('Right was pressed');
}
});
iOS
For an iOS app, in Swift 3, 4 or 5:
theImageView.image = theImageView.image?.withRenderingMode(.alwaysTemplate)
theImageView.tintColor = UIColor.red
For Swift 2:
theImageView.image = theImageView.image?.imageWithRenderingMode(UIImageRenderingMode.AlwaysTemplate)
theImageView.tintColor = UIColor.redColor()
Meanwhile, the modern Objective-C solution is:
theImageView.image = [theImageView.image imageWithRenderingMode:UIImageRenderingModeAlwaysTemplate];
[theImageView setTintColor:[UIColor redColor]];
Watchkit
In WatchKit for Apple Watch apps, you can set the tint color for a template image.
To then set the tint color in Swift 3 or 4:
theImage.setTintColor(UIColor.red)
Swift 2:
theImage.setTintColor(UIColor.redColor())
To then set the tint color in Objective-C:
[self.theImage setTintColor:[UIColor redColor]];
If you use a template image and do not apply a tint colour, the Global Tint for your WatchKit app will be applied. If you have not set a Global Tint, theImage
will be tinted light blue by default when used as a template image.
Check your project's build settings under 'Apple LLVM - Preprocessing', 'Preprocessor Macros' for debug to ensure that DEBUG
is being set - do this by selecting the project and clicking on the build settings tab. Search for DEBUG
and look to see if indeed DEBUG
is being set.
Pay attention though. You may see DEBUG changed to another variable name such as DEBUG_MODE.
then conditionally code for DEBUG in your source files
#ifdef DEBUG
// Something to log your sensitive data here
#else
//
#endif
If you're trying this with GitHub, you can do this with your SSH entered:
git clone https://[email protected]/username/repository
If you`re not using jQuery then please make sure:
var json_upload = "json_name=" + JSON.stringify({name:"John Rambo", time:"2pm"});
var xmlhttp = new XMLHttpRequest(); // new HttpRequest instance
xmlhttp.open("POST", "/file.php");
xmlhttp.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
xmlhttp.send(json_upload);
And for the php receiving end:
$_POST['json_name']
Google TOS have been relaxed a bit in April 2014. Now it states:
"Don’t misuse our Services. For example, don’t interfere with our Services or try to access them using a method other than the interface and the instructions that we provide."
So the passage about "automated means" and scripts is gone now. It evidently still is not the desired (by google) way of accessing their services, but I think it is now formally open to interpretation of what exactly an "interface" is and whether it makes any difference as of how exactly returned HTML is processed (rendered or parsed). Anyhow, I have written a Java convenience library and it is up to you to decide whether to use it or not:
I had the same problem and any solution worked for me.
The cause was I am using allowRequest to accept or reject the connection using a token I pass in a query parameter.
I have a typo in the query parameter name in the client side, so the connection was always rejected, but the browser complained about cors...
As soon as I fixed the typo, it started working as expected, and I don't need to use anything extra, the global express cors settings is enough.
So, if anything is working for you, and you are using allowRequest, check that this function is working properly, because the errors it throws shows up as cors errors in the browser. Unless you add there the cors headers manually when you want to reject the connection, I guess.
In SQL Server 2016 it has its own link:
Just download it here: https://msdn.microsoft.com/en-us/library/mt238290.aspx
With two queries you can achieve this. This is for mysql
//will select shortest length coulmn and display its length.
// only 1 row will be selected, because we limit it by 1
SELECT column, length(column) FROM table order by length(column) asc limit 1;
//will select shortest length coulmn and display its length.
SELECT CITY, length(city) FROM STATION order by length(city) desc limit 1;
1: Get Timings. Until you know where the slowdown is, the question is too broad to answer. A project I'm working on has this precise problem; There's no logging to even know how long certain things take; we can only guess as to the slow parts of the app until we add timings to the project.
2: If you have sequential operations, Don't be afraid to lightly multithread. ESPECIALLY if blocking operations are involved. PLINQ is your friend here.
3: Pregenerate your MVC Views when Publishing... That will help with some of the 'first page hit'
4: Some argue for the stored procedure/ADO advantages of speed. Others argue for speed of development of EF and a more clear seprataion of tiers and their purpose. I've seen really slow designs when SQL and the workarounds to use Sprocs/Views for data retrieval and storage. Also, your difficulty to test goes up. Our current codebase that we are converting from ADO to EF is not performing any worse (and in some cases better) than the old Hand-Rolled model.
5: That said, Think about application Warmup. Part of what we do to help eliminate most of our EF performance woes was to add a special warmup method. It doesn't precompile any queries or anything, but it helps with much of the metadata loading/generation. This can be even more important when dealing with Code First models.
6: As others have said, Don't use Session state or ViewState if possible. They are not necessarily performance optimizations that developers think about, but once you start writing more complex web applications, you want responsiveness. Session state precludes this. Imagine a long running query. You decide to open a new window and try a less complex one. Well, you may as well have waited with session state on, because the server will wait until the first request is done before moving to the next one for that session.
7: Minimize round trips to the database. Save stuff that you frequently use but will not realistically change to your .Net Cache. Try to batch your inserts/updates where possible.
7.1: Avoid Data Access code in your Razor views without a damn good reason. I wouldn't be saying this if I hadn't seen it. They were already accessing their data when putting the model together, why the hell weren't they including it in the model?
Because of the definition of the semantics of nth-child
, I don't see how this is possible without including the length of the list of elements involved. The point of the semantics is to allow segregation of a bunch of child elements into repeating groups (edit - thanks BoltClock) or into a first part of some fixed length, followed by "the rest". You sort-of want the opposite of that, which is what nth-last-child
gives you.
I have a tip for those, who want to get various aggregated values from the same table.
Lets say I have table with users and table with points the users acquire. So the connection between them is 1:N (one user, many points records).
Now in the table 'points' I also store the information about for what did the user get the points (login, clicking a banner etc.). And I want to list all users ordered by SUM(points)
AND then by SUM(points WHERE type = x)
. That is to say ordered by all the points user has and then by points the user got for a specific action (eg. login).
The SQL would be:
SELECT SUM(points.points) AS points_all, SUM(points.points * (points.type = 7)) AS points_login
FROM user
LEFT JOIN points ON user.id = points.user_id
GROUP BY user.id
The beauty of this is in the SUM(points.points * (points.type = 7))
where the inner parenthesis evaluates to either 0 or 1 thus multiplying the given points value by 0 or 1, depending on wheteher it equals to the the type of points we want.
This worked for me
f = open("history_export.csv", "r")
line= 5
for x in range(line):
a = f.readline()
print(a)
Here's what worked for me:
#div {
display: flex;
justify-content: center;
}
#table {
align-self: center;
}
And this aligned it vertically and horizontally.
here a quick script to test if a shell script is running
#!/bin/sh
scripToTest="your_script_here.sh"
scriptExist=$(pgrep -f "$scripToTest")
[ -z "$scriptExist" ] && echo "$scripToTest : not running" || echo "$scripToTest : runnning"
but watch out for this....
Long nullLong = null;
preparedStatement.setLong( nullLong );
-thows null pointer exception-
because the protype is
setLong( long )
NOT
setLong( Long )
nice one to catch you out eh.
v-bind
and v-on
are two frequently used directives in vuejs html template.
So they provided a shorthand notation for the both of them as follows:
You can replace v-on:
with @
v-on:click='someFunction'
as:
@click='someFunction'
Another example:
v-on:keyup='someKeyUpFunction'
as:
@keyup='someKeyUpFunction'
Similarly, v-bind
with :
v-bind:href='var1'
Can be written as:
:href='var1'
Hope it helps!
You need to use parentheses: myList.insert([1, 2, 3])
. When you leave out the parentheses, python thinks you are trying to access myList.insert
at position 1, 2, 3
, because that's what brackets are used for when they are right next to a variable.
The following is a hybrid jQuery solution that formats each data "record" into an HTML element and uses the data's properties as HTML attribute values.
The jquery each
runs the inner loop; I needed the regular JavaScript for
on the outer loop to be able to grab the property name (instead of value) for display as the heading. According to taste it can be modified for slightly different behaviour.
This is only 5 main lines of code but wrapped onto multiple lines for display:
$.get("data.php", function(data){
for (var propTitle in data) {
$('<div></div>')
.addClass('heading')
.insertBefore('#contentHere')
.text(propTitle);
$(data[propTitle]).each(function(iRec, oRec) {
$('<div></div>')
.addClass(oRec.textType)
.attr('id', 'T'+oRec.textId)
.insertBefore('#contentHere')
.text(oRec.text);
});
}
});
Produces the output
(Note: I modified the JSON data text values by prepending a number to ensure I was displaying the proper records in the proper sequence - while "debugging")
<div class="heading">
justIn
</div>
<div id="T123" class="Greeting">
1Hello
</div>
<div id="T514" class="Question">
1What's up?
</div>
<div id="T122" class="Order">
1Come over here
</div>
<div class="heading">
recent
</div>
<div id="T1255" class="Greeting">
2Hello
</div>
<div id="T6564" class="Question">
2What's up?
</div>
<div id="T0192" class="Order">
2Come over here
</div>
<div class="heading">
old
</div>
<div id="T5213" class="Greeting">
3Hello
</div>
<div id="T9758" class="Question">
3What's up?
</div>
<div id="T7655" class="Order">
3Come over here
</div>
<div id="contentHere"></div>
Apply a style sheet
<style>
.heading { font-size: 24px; text-decoration:underline }
.Greeting { color: green; }
.Question { color: blue; }
.Order { color: red; }
</style>
to get a "beautiful" looking set of data
More Info
The JSON data was used in the following way:
for each category (key name the array is held under):
for each object held inside an array:
Well, timing to the rescue again. It seems switch
is generally faster than if
statements.
So that, and the fact that the code is shorter/neater with a switch
statement leans in favor of switch
:
# Simplified to only measure the overhead of switch vs if
test1 <- function(type) {
switch(type,
mean = 1,
median = 2,
trimmed = 3)
}
test2 <- function(type) {
if (type == "mean") 1
else if (type == "median") 2
else if (type == "trimmed") 3
}
system.time( for(i in 1:1e6) test1('mean') ) # 0.89 secs
system.time( for(i in 1:1e6) test2('mean') ) # 1.13 secs
system.time( for(i in 1:1e6) test1('trimmed') ) # 0.89 secs
system.time( for(i in 1:1e6) test2('trimmed') ) # 2.28 secs
Update With Joshua's comment in mind, I tried other ways to benchmark. The microbenchmark seems the best. ...and it shows similar timings:
> library(microbenchmark)
> microbenchmark(test1('mean'), test2('mean'), times=1e6)
Unit: nanoseconds
expr min lq median uq max
1 test1("mean") 709 771 864 951 16122411
2 test2("mean") 1007 1073 1147 1223 8012202
> microbenchmark(test1('trimmed'), test2('trimmed'), times=1e6)
Unit: nanoseconds
expr min lq median uq max
1 test1("trimmed") 733 792 843 944 60440833
2 test2("trimmed") 2022 2133 2203 2309 60814430
Final Update Here's showing how versatile switch
is:
switch(type, case1=1, case2=, case3=2.5, 99)
This maps case2
and case3
to 2.5
and the (unnamed) default to 99
. For more information, try ?switch
It is an "INEQUALITY" operator. Get a list of comparison operators in VBA
Generate an array of years:
const DAYS = () => {
const days = []
const dateStart = moment()
const dateEnd = moment().add(30, ‘days')
while (dateEnd.diff(dateStart, ‘days') >= 0) {
days.push(dateStart.format(‘D'))
dateStart.add(1, ‘days')
}
return days
}
console.log(DAYS())
Generate an arrays for month:
const MONTHS = () => {
const months = []
const dateStart = moment()
const dateEnd = moment().add(12, ‘month')
while (dateEnd.diff(dateStart, ‘months') >= 0) {
months.push(dateStart.format(‘M'))
dateStart.add(1, ‘month')
}
return months
}
console.log(MONTHS())
Generate an arrays for days:
const DAYS = () => {
const days = []
const dateStart = moment()
const dateEnd = moment().add(30, ‘days')
while (dateEnd.diff(dateStart, ‘days') >= 0) {
days.push(dateStart.format(‘D'))
dateStart.add(1, ‘days')
}
return days
}
console.log(DAYS())
you can use len(arr)
as suggested in previous answers to get the length of the array. In case you want the dimensions of a 2D array you could use arr.shape
returns height and width
To add to what Evan said: C does not have a built-in operator for exponentiation, because it is not a primitive operation for most CPUs. Thus, it's implemented as a library function.
Also, for computing the function e^x, you can use the exp(double)
, expf(float)
, and expl(long double)
functions.
Note that you do not want to use the ^
operator, which is the bitwise exclusive OR operator.
As described in Cast Functions and Operators:
The type for the result can be one of the following values:
BINARY[(N)]
CHAR[(N)]
DATE
DATETIME
DECIMAL[(M[,D])]
SIGNED [INTEGER]
TIME
UNSIGNED [INTEGER]
Therefore, you should use:
SELECT CAST(PROD_CODE AS UNSIGNED) FROM PRODUCT
Procedure + temporary table:
DELIMITER $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `days`(IN dateStart DATE, IN dateEnd DATE)
BEGIN
CREATE TEMPORARY TABLE IF NOT EXISTS date_range (day DATE);
WHILE dateStart <= dateEnd DO
INSERT INTO date_range VALUES (dateStart);
SET dateStart = DATE_ADD(dateStart, INTERVAL 1 DAY);
END WHILE;
SELECT * FROM date_range;
DROP TEMPORARY TABLE IF EXISTS date_range;
END
select * from tableName where columnName is null
Not sure about the performance implications, but it seems a possible compromise, at least during development, would be to include both the auto-incremented, integer "surrogate" key, as well as your intended, unique, "natural" key. This would give you the opportunity to evaluate performance, as well as other possible issues, including the changeability of natural keys.
md5=$(md5sum < $file | tr -d ' -')
The JavaScript function:
String.prototype.capitalize = function(){
return this.replace( /(^|\s)([a-z])/g , function(m,p1,p2){ return p1+p2.toUpperCase(); } );
};
To use this function:
capitalizedString = someString.toLowerCase().capitalize();
Also, this would work on multiple words string.
To make sure the converted City name is injected into the database, lowercased and first letter capitalized, then you would need to use JavaScript before you send it over to server side. CSS simply styles, but the actual data would remain pre-styled. Take a look at this jsfiddle example and compare the alert message vs the styled output.
The cex
parameter will do that for you.
a <- c(3, 2, 2, 2, 1, 2 )
barplot(a, beside = T,
col = 1:6, space = c(0, 2))
legend("topright",
legend = c("a", "b", "c", "d", "e", "f"),
fill = 1:6, ncol = 2,
cex = 0.75)
Math.round(value)
round the value to the nearest whole number.
Use
1) b=(int)(Math.round(a));
2) a=Math.round(a);
b=(int)a;
I know this has been answered, but here's mine just because I think case is an under-appreciated tool. (Maybe because people think it is slow, but it's at least as fast as an if, sometimes faster.)
case "$1" in
0|1) xinput set-prop 12 "Device Enabled" $1 ;;
*) echo "This script requires a 1 or 0 as first parameter." ;;
esac
I had a similar issue using the JAXB reference implementation and JBoss AS 7.1. I was able to write an integration test that confirmed JAXB worked outside of the JBoss environment (suggesting the problem might be the class loader in JBoss).
This is the code that was giving the error (i.e. not working):
private static final JAXBContext JC;
static {
try {
JC = JAXBContext.newInstance("org.foo.bar");
} catch (Exception exp) {
throw new RuntimeException(exp);
}
}
and this is the code that worked (ValueSet is one of the classes marshaled from my XML).
private static final JAXBContext JC;
static {
try {
ClassLoader classLoader = ValueSet.class.getClassLoader();
JC = JAXBContext.newInstance("org.foo.bar", classLoader);
} catch (Exception exp) {
throw new RuntimeException(exp);
}
}
In some cases I got the Class nor any of its super class is known to this context. In other cases I also got an exception of org.foo.bar.ValueSet cannot be cast to org.foo.bar.ValueSet (similar to the issue described here: ClassCastException when casting to the same class).
you can send the original array to a method for example:
after that you create a new array to hold the reversed elements
public static void reverse(int[] a){
int[] reversedArray = new int[a.length];
for(int i = 0 ; i<a.length; i++){
reversedArray[i] = a[a.length -1 -i];
}
I provide a more general and safer way to do this stuff,
".." <- function (x)
{
stopifnot(inherits(x, "character"))
stopifnot(length(x) == 1)
get(x, parent.frame(4))
}
set_colclass <- function(x, class){
stopifnot(all(class %in% c("integer", "numeric", "double","factor","character")))
for(i in intersect(names(class), names(x))){
f <- get(paste0("as.", class[i]))
x[, (..("i")):=..("f")(get(..("i")))]
}
invisible(x)
}
The function ..
makes sure we get a variable out of the scope of data.table; set_colclass will set the classes of your cols.
You can use it like this:
dt <- data.table(i=1:3,f=3:1)
set_colclass(dt, c(i="character"))
class(dt$i)
For Bootstrap 3:
<link href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.5/css/bootstrap.min.css" rel="stylesheet"/>_x000D_
_x000D_
_x000D_
<div class="row">_x000D_
<div class="col-md-4">_x000D_
<div class="well">1_x000D_
<br/>_x000D_
<br/>_x000D_
<br/>_x000D_
<br/>_x000D_
<br/>_x000D_
</div>_x000D_
</div>_x000D_
<div class="col-md-8">_x000D_
<div class="row">_x000D_
<div class="col-md-6">_x000D_
<div class="well">2</div>_x000D_
</div>_x000D_
<div class="col-md-6">_x000D_
<div class="well">3</div>_x000D_
</div>_x000D_
</div>_x000D_
<div class="row">_x000D_
<div class="col-md-6">_x000D_
<div class="well">4</div>_x000D_
</div>_x000D_
<div class="col-md-6">_x000D_
<div class="well">5</div>_x000D_
</div>_x000D_
</div>_x000D_
</div>_x000D_
</div>_x000D_
<div class="row">_x000D_
<div class="col-md-4">_x000D_
<div class="well">6</div>_x000D_
</div>_x000D_
<div class="col-md-4">_x000D_
<div class="well">7</div>_x000D_
</div>_x000D_
<div class="col-md-4">_x000D_
<div class="well">8</div>_x000D_
</div>_x000D_
</div>
_x000D_
For Bootstrap 2:
<link href="https://cdnjs.cloudflare.com/ajax/libs/twitter-bootstrap/2.3.2/css/bootstrap.min.css" rel="stylesheet"/>_x000D_
_x000D_
<div class="row-fluid">_x000D_
<div class="span4"><div class="well">1<br/><br/><br/><br/><br/></div></div>_x000D_
<div class="span8">_x000D_
<div class="row-fluid">_x000D_
<div class="span6"><div class="well">2</div></div>_x000D_
<div class="span6"><div class="well">3</div></div>_x000D_
</div>_x000D_
<div class="row-fluid">_x000D_
<div class="span6"><div class="well">4</div></div>_x000D_
<div class="span6"><div class="well">5</div></div>_x000D_
</div>_x000D_
</div>_x000D_
</div>_x000D_
<div class="row-fluid">_x000D_
<div class="span4">_x000D_
<div class="well">6</div>_x000D_
</div>_x000D_
<div class="span4">_x000D_
<div class="well">7</div>_x000D_
</div>_x000D_
<div class="span4">_x000D_
<div class="well">8</div>_x000D_
</div>_x000D_
</div>
_x000D_
See the demo on JSFiddle (Bootstrap 2): http://jsfiddle.net/SxcqH/52/
I would recommend you look at getting the anaconda package, it will install and configure Sklearn and its dependencies.
Also having smartNavigation="true" causes this"
How to create an array size 5 containing pointers to characters:
char *array_of_pointers[ 5 ]; //array size 5 containing pointers to char
char m = 'm'; //character value holding the value 'm'
array_of_pointers[0] = &m; //assign m ptr into the array position 0.
printf("%c", *array_of_pointers[0]); //get the value of the pointer to m
How to create a pointer to an array of characters:
char (*pointer_to_array)[ 5 ]; //A pointer to an array containing 5 chars
char m = 'm'; //character value holding the value 'm'
*pointer_to_array[0] = m; //dereference array and put m in position 0
printf("%c", (*pointer_to_array)[0]); //dereference array and get position 0
How to create an 2D array containing pointers to characters:
char *array_of_pointers[5][2];
//An array size 5 containing arrays size 2 containing pointers to char
char m = 'm';
//character value holding the value 'm'
array_of_pointers[4][1] = &m;
//Get position 4 of array, then get position 1, then put m ptr in there.
printf("%c", *array_of_pointers[4][1]);
//Get position 4 of array, then get position 1 and dereference it.
How to create a pointer to an 2D array of characters:
char (*pointer_to_array)[5][2];
//A pointer to an array size 5 each containing arrays size 2 which hold chars
char m = 'm';
//character value holding the value 'm'
(*pointer_to_array)[4][1] = m;
//dereference array, Get position 4, get position 1, put m there.
printf("%c", (*pointer_to_array)[4][1]);
//dereference array, Get position 4, get position 1
To help you out with understanding how humans should read complex C/C++ declarations read this: http://www.programmerinterview.com/index.php/c-cplusplus/c-declarations/
For xCode 10, first you need to add the image in your assetsCatalogue and then type this:
let imageView = UIImageView(image: #imageLiteral(resourceName: "type the name of your image here..."))
For beginners, let imageView
is the name of the UIImageView
object we are about to create.
An example for embedding an image into a viewControler
file would look like this:
import UIKit
class TutorialViewCotroller: UIViewController {
override func viewDidLoad() {
super.viewDidLoad()
let imageView = UIImageView(image: #imageLiteral(resourceName: "intoImage"))
view.addSubview(imageView)
}
}
Please notice that I did not use any extension for the image file name, as in my case it is a group of images.
Just implemented my OWIN Service with Bearer (called access_token in the following) and Refresh Tokens. My insight into this is that you can use different flows. So it depends on the flow you want to use how you set your access_token and refresh_token expiration times.
I will describe two flows A and B in the follwing (I suggest what you want to have is flow B):
A) expiration time of access_token and refresh_token are the same as it is per default 1200 seconds or 20 minutes. This flow needs your client first to send client_id and client_secret with login data to get an access_token, refresh_token and expiration_time. With the refresh_token it is now possible to get a new access_token for 20 minutes (or whatever you set the AccessTokenExpireTimeSpan in the OAuthAuthorizationServerOptions to). For the reason that the expiration time of access_token and refresh_token are the same, your client is responsible to get a new access_token before the expiration time! E.g. your client could send a refresh POST call to your token endpoint with the body (remark: you should use https in production)
grant_type=refresh_token&client_id=xxxxxx&refresh_token=xxxxxxxx-xxxx-xxxx-xxxx-xxxxx
to get a new token after e.g. 19 minutes to prevent the tokens from expiration.
B) in this flow you want to have a short term expiration for your access_token and a long term expiration for your refresh_token. Lets assume for test purpose you set the access_token to expire in 10 seconds (AccessTokenExpireTimeSpan = TimeSpan.FromSeconds(10)
) and the refresh_token to 5 Minutes. Now it comes to the interesting part setting the expiration time of refresh_token: You do this in your createAsync function in SimpleRefreshTokenProvider class like this:
var guid = Guid.NewGuid().ToString();
//copy properties and set the desired lifetime of refresh token
var refreshTokenProperties = new AuthenticationProperties(context.Ticket.Properties.Dictionary)
{
IssuedUtc = context.Ticket.Properties.IssuedUtc,
ExpiresUtc = DateTime.UtcNow.AddMinutes(5) //SET DATETIME to 5 Minutes
//ExpiresUtc = DateTime.UtcNow.AddMonths(3)
};
/*CREATE A NEW TICKET WITH EXPIRATION TIME OF 5 MINUTES
*INCLUDING THE VALUES OF THE CONTEXT TICKET: SO ALL WE
*DO HERE IS TO ADD THE PROPERTIES IssuedUtc and
*ExpiredUtc to the TICKET*/
var refreshTokenTicket = new AuthenticationTicket(context.Ticket.Identity, refreshTokenProperties);
//saving the new refreshTokenTicket to a local var of Type ConcurrentDictionary<string,AuthenticationTicket>
// consider storing only the hash of the handle
RefreshTokens.TryAdd(guid, refreshTokenTicket);
context.SetToken(guid);
Now your client is able to send a POST call with a refresh_token to your token endpoint when the access_token
is expired. The body part of the call may look like this: grant_type=refresh_token&client_id=xxxxxx&refresh_token=xxxxxxxx-xxxx-xxxx-xxxx-xx
One important thing is that you may want to use this code not only in your CreateAsync function but also in your Create function. So you should consider to use your own function (e.g. called CreateTokenInternal) for the above code. Here you can find implementations of different flows including refresh_token flow(but without setting the expiration time of the refresh_token)
Here is one sample implementation of IAuthenticationTokenProvider on github (with setting the expiration time of the refresh_token)
I am sorry that I can't help out with further materials than the OAuth Specs and the Microsoft API Documentation. I would post the links here but my reputation doesn't let me post more than 2 links....
I hope this may help some others to spare time when trying to implement OAuth2.0 with refresh_token expiration time different to access_token expiration time. I couldn't find an example implementation on the web (except the one of thinktecture linked above) and it took me some hours of investigation until it worked for me.
New info: In my case I have two different possibilities to receive tokens. One is to receive a valid access_token. There I have to send a POST call with a String body in format application/x-www-form-urlencoded with the following data
client_id=YOURCLIENTID&grant_type=password&username=YOURUSERNAME&password=YOURPASSWORD
Second is if access_token is not valid anymore we can try the refresh_token by sending a POST call with a String body in format application/x-www-form-urlencoded
with the following data grant_type=refresh_token&client_id=YOURCLIENTID&refresh_token=YOURREFRESHTOKENGUID
If the question was about C (you didn't say), then the answer is no, but: GCC and Clang (maybe others) support a range syntax, but it's not valid ISO C:
switch (number) {
case 1 ... 4:
// Do something.
break;
case 5 ... 9:
// Do something else.
break;
}
Be sure to have a space before and after the ...
or else you'll get a syntax error.
You can do kubectl get replicasets
check for old deployment based on age or time
Delete old deployment based on time if you want to delete same current running pod of application
kubectl delete replicasets <Name of replicaset>
This does it:
Do
c = c + 1
Loop While Cells(c, "A").Value <> ""
'prints the last empty row
Debug.Print c
I found 3 ways to implement this:
C# class:
public class AddressInfo {
public string Address1 { get; set; }
public string Address2 { get; set; }
public string City { get; set; }
public string State { get; set; }
public string ZipCode { get; set; }
public string Country { get; set; }
}
Action:
[HttpPost]
public ActionResult Check(AddressInfo addressInfo)
{
return Json(new { success = true });
}
JavaScript you can do it three ways:
1) Query String:
$.ajax({
url: '/en/Home/Check',
data: $('#form').serialize(),
type: 'POST',
});
Data here is a string.
"Address1=blah&Address2=blah&City=blah&State=blah&ZipCode=blah&Country=blah"
2) Object Array:
$.ajax({
url: '/en/Home/Check',
data: $('#form').serializeArray(),
type: 'POST',
});
Data here is an array of key/value pairs :
=[{name: 'Address1', value: 'blah'}, {name: 'Address2', value: 'blah'}, {name: 'City', value: 'blah'}, {name: 'State', value: 'blah'}, {name: 'ZipCode', value: 'blah'}, {name: 'Country', value: 'blah'}]
3) JSON:
$.ajax({
url: '/en/Home/Check',
data: JSON.stringify({ addressInfo:{//missing brackets
Address1: $('#address1').val(),
Address2: $('#address2').val(),
City: $('#City').val(),
State: $('#State').val(),
ZipCode: $('#ZipCode').val()}}),
type: 'POST',
contentType: 'application/json; charset=utf-8'
});
Data here is a serialized JSON string. Note that the name has to match the parameter name in the server!!
='{"addressInfo":{"Address1":"blah","Address2":"blah","City":"blah","State":"blah", "ZipCode", "blah", "Country", "blah"}}'
The answer provided by Joe Stefanelli is already correct.
SELECT name FROM (SELECT name FROM agentinformation) as a
We need to make an alias of the subquery because a query needs a table object which we will get from making an alias for the subquery. Conceptually, the subquery results are substituted into the outer query. As we need a table object in the outer query, we need to make an alias of the inner query.
Statements that include a subquery usually take one of these forms:
Check for more subquery rules and subquery types.
More examples of Nested Subqueries.
IN / NOT IN – This operator takes the output of the inner query after the inner query gets executed which can be zero or more values and sends it to the outer query. The outer query then fetches all the matching [IN operator] or non matching [NOT IN operator] rows.
ANY – [>ANY or ANY operator takes the list of values produced by the inner query and fetches all the values which are greater than the minimum value of the list. The
e.g. >ANY(100,200,300), the ANY operator will fetch all the values greater than 100.
e.g. >ALL(100,200,300), the ALL operator will fetch all the values greater than 300.
In ~/.subversion/auth/svn.simple/
you should find a file with a long hexadecimal name. The password is in there in plaintext.
If there is more than one file you'll need to find that one that references the server you need the password for.
You can Enable DBMS_OUTPUT and set the buffer size. The buffer size can be between 1 and 1,000,000.
dbms_output.enable(buffer_size IN INTEGER DEFAULT 20000);
exec dbms_output.enable(1000000);
Check this
EDIT
As per the comment posted by Frank and Mat, you can also enable it with Null
exec dbms_output.enable(NULL);
buffer_size : Upper limit, in bytes, the amount of buffered information. Setting buffer_size to NULL specifies that there should be no limit. The maximum size is 1,000,000, and the minimum is 2,000 when the user specifies buffer_size (NOT NULL).
I know that the response is late, but the best way to execute sqlite queries in android is through a custom content provider. In that way the UI is decoupled with the database class(the class that extends the SQLiteOpenHelper class). Also the queries are executed in a background thread(Cursor Loader).
ps -ef | grep java
pid
of running jdkkill -9 [pid]
Faced the same issue. To solve it,
$ sdk install gradle
using the package manager or $ brew install gradle
for mac. You might need to first install brew if not yet. I need to know way for converting uri to string and string to uri.
Use toString()
to convert a Uri
to a String
. Use Uri.parse()
to convert a String
to a Uri
.
this code doesn't work
That is not a valid string representation of a Uri
. A Uri
has a scheme, and "/external/images/media/470939"
does not have a scheme.
Simple and effective solution: Instead of using the LoadXml()
method use the Load()
method
For example:
XmlDocument xmlDoc = new XmlDocument();
xmlDoc.Load("sample.xml");
This is an old question, yet I had the same problem when moving from JDK 1.8.0_144 to jdk 1.8.0_191
We found a hint in the changelog:
we added the following additional system property, which helped in our case to solve this issue:
-Dcom.sun.jndi.ldap.object.disableEndpointIdentification=true
Found the solution as below.... posting it as it could help somebody else too :)
DateFormat format = new SimpleDateFormat("yyyy-MM-dd hh:mm:ss");
Date date = format.parse("2014-04-24 11:15:00");
GregorianCalendar cal = new GregorianCalendar();
cal.setTime(date);
XMLGregorianCalendar xmlGregCal = DatatypeFactory.newInstance().newXMLGregorianCalendar(cal);
System.out.println(xmlGregCal);
Output:
2014-04-24T11:15:00.000+02:00
Well for the very basics you can try aligning them in the table. However the use of table is bad for layout since table is meant for contents.
What you can use is CSS floating techniques.
.styleform label{float:left;}
.styleform input{margin-left:200px;} /* this gives space for the label on the left */
.styleform .clear{clear:both;} /* prevent elements from stacking weirdly */
<div class="styleform">
<form>
<label>First Name:</label><input type="text" name="first" /><div class="clear"></div>
<label>Last Name:</label><input type="text" name="first" /><div class="clear"></div>
<label>Email:</label><input type="text" name="first" /><div class="clear"></div>
</form>
</div>
An elaborated article I wrote can be found answering the question of IE7 float problem: IE7 float right problems
A basic but simple to understand answer:
Sub Example()
ActiveSheet.Unprotect
Program logic...
ActiveSheet.Protect
End Sub
As long as you don't COMMIT or ROLLBACK a transaction, it's still "running" and potentially holding locks.
If your client (application or user) closes the connection to the database before committing, any still running transactions will be rolled back and terminated.
I think you can leverage the [Zip File System Provider][1] to achieve this. When using FileSystems.newFileSystem
it looks like you can treat the objects in that ZIP as a "regular" file.
In the linked documentation above:
Specify the configuration options for the zip file system in the java.util.Map object passed to the
FileSystems.newFileSystem
method. See the [Zip File System Properties][2] topic for information about the provider-specific configuration properties for the zip file system.Once you have an instance of a zip file system, you can invoke the methods of the [
java.nio.file.FileSystem
][3] and [java.nio.file.Path
][4] classes to perform operations such as copying, moving, and renaming files, as well as modifying file attributes.
The documentation for the jdk.zipfs
module in [Java 11 states][5]:
The zip file system provider treats a zip or JAR file as a file system and provides the ability to manipulate the contents of the file. The zip file system provider can be created by [
FileSystems.newFileSystem
][6] if installed.
Here is a contrived example I did using your example resources. Note that a .zip
is a .jar
, but you could adapt your code to instead use classpath resources:
Setup
cd /tmp
mkdir -p x/y/z
touch x/y/z/{a,b,c}.html
echo 'hello world' > x/y/z/d
zip -r example.zip x
Java
import java.io.IOException;
import java.net.URI;
import java.nio.file.FileSystem;
import java.nio.file.FileSystems;
import java.nio.file.Files;
import java.util.Collections;
import java.util.stream.Collectors;
public class MkobitZipRead {
public static void main(String[] args) throws IOException {
final URI uri = URI.create("jar:file:/tmp/example.zip");
try (
final FileSystem zipfs = FileSystems.newFileSystem(uri, Collections.emptyMap());
) {
Files.walk(zipfs.getPath("/")).forEach(path -> System.out.println("Files in zip:" + path));
System.out.println("-----");
final String manifest = Files.readAllLines(
zipfs.getPath("x", "y", "z").resolve("d")
).stream().collect(Collectors.joining(System.lineSeparator()));
System.out.println(manifest);
}
}
}
Output
Files in zip:/
Files in zip:/x/
Files in zip:/x/y/
Files in zip:/x/y/z/
Files in zip:/x/y/z/c.html
Files in zip:/x/y/z/b.html
Files in zip:/x/y/z/a.html
Files in zip:/x/y/z/d
-----
hello world
This is an example to use ONLY p12 file it's not optimazed but it work. The pkcs12 file where generated by OpenSSL by me. Example how to load p12 file and build Trust zone from it... It outputs certificates from p12 file and add good certs to TrustStore
KeyStore ks=KeyStore.getInstance("pkcs12");
ks.load(new FileInputStream("client_t_c1.p12"),"c1".toCharArray());
KeyStore jks=KeyStore.getInstance("JKS");
jks.load(null);
for (Enumeration<String>t=ks.aliases();t.hasMoreElements();)
{
String alias = t.nextElement();
System.out.println("@:" + alias);
if (ks.isKeyEntry(alias)){
Certificate[] a = ks.getCertificateChain(alias);
for (int i=0;i<a.length;i++)
{
X509Certificate x509 = (X509Certificate)a[i];
System.out.println(x509.getSubjectDN().toString());
if (i>0)
jks.setCertificateEntry(x509.getSubjectDN().toString(), x509);
System.out.println(ks.getCertificateAlias(x509));
System.out.println("ok");
}
}
}
System.out.println("init Stores...");
KeyManagerFactory kmf=KeyManagerFactory.getInstance("SunX509");
kmf.init(ks, "c1".toCharArray());
TrustManagerFactory tmf=TrustManagerFactory.getInstance("SunX509");
tmf.init(jks);
SSLContext ctx = SSLContext.getInstance("TLS");
ctx.init(kmf.getKeyManagers(), tmf.getTrustManagers(), null);
You may try to use the following form:
select * from table1 where ID in (1,2,3,4,...,1000)
union all
select * from table1 where ID in (1001,1002,...)
Check if the Console is telling you something. Usually this happen when the project could not be install in the device, and just show the previous one. The most common case I has seen this is when there are different signatures in the project, and is not running at all. Please, read all red letter you see. If the LogCat does not show anything, take for sure that the Console will do.
In React 16.8+, using functional components, you would do
import React from 'react';
import { Button, Linking } from 'react-native';
const ExternalLinkBtn = (props) => {
return <Button
title={props.title}
onPress={() => {
Linking.openURL(props.url)
.catch(err => {
console.error("Failed opening page because: ", err)
alert('Failed to open page')
})}}
/>
}
export default function exampleUse() {
return (
<View>
<ExternalLinkBtn title="Example Link" url="https://example.com" />
</View>
)
}