I am late in the party but I didn't see my solusion above. We are able to set tint color via setImageResource(), too (my minSdkVersion is 24).

So, first, you need to create a selector and save it in /drawable asset folder (I call it ic_color_white_green_search.xml)

<!-- Focused and not pressed -->
<item android:state_focused="true"
      android:state_pressed="false">

    <bitmap android:src="@drawable/ic_search"
            android:tint="@color/branding_green"/>
</item>

<!-- Focused and pressed -->
<item android:state_focused="true"
      android:state_pressed="true">

    <bitmap android:src="@drawable/ic_search"
            android:tint="@color/branding_green"/>
</item>

<!-- Default -->
<item android:drawable="@drawable/ic_search"/>

Then set it in code like this:

val icon = itemView.findViewById(R.id.icon) as ImageButton
icon.setImageResource(R.drawable.ic_color_white_green_search)

Webkit only solution

Quick solution, relies on the -webkit-mask-image property. -webkit-mask-image sets a mask image for an element.

There are a few gotchas with this method:

• Obviously, only works in Webkit browsers
• Requires an additional wrapper to apply the :after psuedo-element (IMG tags can't have :before/:after pseudo elements, grr)
• Because there's an additional wrapper, I'm not sure how to use the attr(…) CSS function to get the IMG tag URL, so it's hard-coded into the CSS separately.

If you can look past those issues, this might be a possible solution. SVG filters will be even more flexible, and Canvas solutions will be even more flexible and have a wider range of support (SVG doesn't have Android 2.x support).

try this: File->project Structure into Project Structure Left > SDKs SDK location select Android SDK location (old version use Press +, add another sdk)

It's important to note, that NULL doesn't equal NULL.

NULL is not a value, and therefore cannot be compared to another value.

where x is null checks whether x is a null value.

where x = null is checking whether x equals NULL, which will never be true

Using JDOM:

String xml = "<message>HELLO!</message>";
org.jdom.input.SAXBuilder saxBuilder = new SAXBuilder();
try {
    org.jdom.Document doc = saxBuilder.build(new StringReader(xml));
    String message = doc.getRootElement().getText();
    System.out.println(message);
} catch (JDOMException e) {
    // handle JDOMException
} catch (IOException e) {
    // handle IOException
}

Using the Xerces DOMParser:

String xml = "<message>HELLO!</message>";
DOMParser parser = new DOMParser();
try {
    parser.parse(new InputSource(new java.io.StringReader(xml)));
    Document doc = parser.getDocument();
    String message = doc.getDocumentElement().getTextContent();
    System.out.println(message);
} catch (SAXException e) {
    // handle SAXException 
} catch (IOException e) {
    // handle IOException 
}

Using the JAXP interfaces:

String xml = "<message>HELLO!</message>";
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
DocumentBuilder db = null;
try {
    db = dbf.newDocumentBuilder();
    InputSource is = new InputSource();
    is.setCharacterStream(new StringReader(xml));
    try {
        Document doc = db.parse(is);
        String message = doc.getDocumentElement().getTextContent();
        System.out.println(message);
    } catch (SAXException e) {
        // handle SAXException
    } catch (IOException e) {
        // handle IOException
    }
} catch (ParserConfigurationException e1) {
    // handle ParserConfigurationException
}

Here is more clear concepts about firebase message. I found it from their support team.

Firebase has three message types:

Notification messages : Notification message works on background or foreground. When app is in background, Notification messages are delivered to the system tray. If the app is in the foreground, messages are handled by onMessageReceived() or didReceiveRemoteNotification callbacks. These are essentially what is referred to as Display messages.

Data messages: On Android platform, data message can work on background and foreground. The data message will be handled by onMessageReceived(). A platform specific note here would be: On Android, the data payload can be retrieved in the Intent used to launch your activity. To elaborate, if you have "click_action":"launch_Activity_1", you can retrieve this intent through getIntent() from only Activity_1.

Messages with both notification and data payloads: When in the background, apps receive the notification payload in the notification tray, and only handle the data payload when the user taps on the notification. When in the foreground, your app receives a message object with both payloads available. Secondly, the click_action parameter is often used in notification payload and not in data payload. If used inside data payload, this parameter would be treated as custom key-value pair and therefore you would need to implement custom logic for it to work as intended.

Also, I recommend you to use onMessageReceived method (see Data message) to extract the data bundle. From your logic, I checked the bundle object and haven't found expected data content. Here is a reference to a similar case which might provide more clarity.

For more info visit my this thread

For anyone who is populating programmatically and looking to get an index, you might notice that the checkedId changes as you return to the activity/fragment and you re-add those radio buttons. One way to get around that is to set a tag with the index:

    for(int i = 0; i < myNames.length; i++) {
        rB = new RadioButton(getContext());
        rB.setText(myNames[i]);
        rB.setTag(i);
        myRadioGroup.addView(rB,i);
    }

Then in your listener:

    myRadioGroup.setOnCheckedChangeListener(new RadioGroup.OnCheckedChangeListener() {
        @Override
        public void onCheckedChanged(RadioGroup group, int checkedId) {
            RadioButton radioButton = (RadioButton) group.findViewById(checkedId);
            int mySelectedIndex = (int) radioButton.getTag();
        }
    });

The following approach is correct:

<context:component-scan base-package="x.y.z.service, x.y.z.controller" /> 

Note that the error complains about x.y.z.dao.daoservice.LoginDAO, which is not in the packages mentioned above, perhaps you forgot to add it:

<context:component-scan base-package="x.y.z.service, x.y.z.controller, x.y.z.dao" /> 

I just tried to call a function in terminal rather then MySQL Query Browser and it works. So, it looks like I'm doing something wrong in that program...

I don't know what since I called some procedures before successfully (but there where no out parameters)...

For this one I had entered

CALL my_sqrt(4,@out_value);
SELECT @out_value;

And it results with an error:

You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'SELECT @out_value' at line 2

Strangely, if I write just:

CALL my_sqrt(4,@out_value); 

The result message is: "Query canceled"

I guess, for now I will use only terminal...

The simple one line solution is

datediff(dd,'2010-12-31 15:13:48.593','2010-12-31 00:00:00.000')=0

datediff(dd,'2010-12-31 15:13:48.593','2010-12-31 00:00:00.000')<=1

datediff(dd,'2010-12-31 15:13:48.593','2010-12-31 00:00:00.000')>=1

You can try various option with this other than "dd"

Seems that only index.js get loaded when you require("./routes") . I used the following code in index.js to load the rest of the routes:

var fs = require('fs')
  , path = require('path');

fs.readdirSync(__dirname).forEach(function(file){
  var route_fname = __dirname + '/' + file;
  var route_name = path.basename(route_fname, '.js');
  if(route_name !== 'index' && route_name[0] !== "."){ 
    exports[route_name] = require(route_fname)[route_name];
  }
});

If you are interested in only selecting one column this will work.

df[["item1"]].to_dict("records")

The below will NOT work and produces a TypeError: unsupported type: . I believe this is because it is trying to convert a series to a dict and not a Data Frame to a dict.

df["item1"].to_dict("records")

I had a requirement to only select one column and convert it to a list of dicts with the column name as the key and was stuck on this for a bit so figured I'd share.

Probably the best way is this one here.

fileprivate func NSLocalizedString(_ key: String) -> String {
    return NSLocalizedString(key, comment: "")
}

and

import Foundation
extension String {
    static let Hello = NSLocalizedString("Hello")
    static let ThisApplicationIsCreated = NSLocalizedString("This application is created by the swifting.io team")
    static let OpsNoFeature = NSLocalizedString("Ops! It looks like this feature haven't been implemented yet :(!")
}

you can then use it like this

let message: String = .ThisApplicationIsCreated
print(message)

to me this is the best because

• The hardcoded strings are in one specific file, so the day you want to change it it's really easy
• Easier to use than manually typing the strings in your file every time
• genstrings will still work
• you can add more extensions, like one per view controller to keep things neat

Newer versions of Groovy (1.7.2+) offer a JDK extension to more easily traverse over files in a directory, for example:

import static groovy.io.FileType.FILES
def dir = new File(".");
def files = [];
dir.traverse(type: FILES, maxDepth: 0) { files.add(it) };

See also [1] for more examples.

[1] http://mrhaki.blogspot.nl/2010/04/groovy-goodness-traversing-directory.html

You can implement a hasRole() method as below - (This is tested on spring security 3.0.x not sure about other versions.)

  protected final boolean hasRole(String role) {
    boolean hasRole = false;
    UserDetails userDetails = getUserDetails();
    if (userDetails != null) {
      Collection<GrantedAuthority> authorities = userDetails.getAuthorities();
      if (isRolePresent(authorities, role)) {
        hasRole = true;
      }
    } 
    return hasRole;
  }
  /**
   * Get info about currently logged in user
   * @return UserDetails if found in the context, null otherwise
   */
  protected UserDetails getUserDetails() {
    Object principal = SecurityContextHolder.getContext().getAuthentication().getPrincipal();
    UserDetails userDetails = null;
    if (principal instanceof UserDetails) {
      userDetails = (UserDetails) principal;
    }
    return userDetails;
  }
  /**
   * Check if a role is present in the authorities of current user
   * @param authorities all authorities assigned to current user
   * @param role required authority
   * @return true if role is present in list of authorities assigned to current user, false otherwise
   */
  private boolean isRolePresent(Collection<GrantedAuthority> authorities, String role) {
    boolean isRolePresent = false;
    for (GrantedAuthority grantedAuthority : authorities) {
      isRolePresent = grantedAuthority.getAuthority().equals(role);
      if (isRolePresent) break;
    }
    return isRolePresent;
  }

First Find PID # - where the Rails Server got stuck on

Run this to find the stuck PID

cat ./tmp/pids/server.pid

It will return something like 65829

Then KILL that PID => kill 65829

None of these worked for me using 4.1 video.js CDN. This code kills the video playing in a modal when the (.closemodal) is clicked. I had 3 videos. Someone else can refactor.

var myPlayer = videojs("my_video_1");
var myPlayer2 = videojs("my_video_2");
var myPlayer3 = videojs("my_video_3");
$(".closemodal").click(function(){
   myPlayer.pause();
myPlayer2.pause();
myPlayer3.pause();
});
});

as per their Api docs.

A small and short way of doing the same

HTML

<div class="image">
     <p>
        <h3>Heading 3</h3>
        <h5>Heading 5</h5>
     </p>
</div>

CSS

.image {
        position: relative;
        margin-bottom: 20px;
        width: 100%;
        height: 300px;
        color: white;
        background: url('../../Images/myImg.jpg') no-repeat;
        background-size: 250px 250px;
    }

As already answered, yes there is a ternary operator in python:

<expression 1> if <condition> else <expression 2>

Additional information:

If <expression 1> is the condition you can use Short-cirquit evaluation:

a = True
b = False

# Instead of this:
x = a if a else b

# You could use Short-cirquit evaluation:
x = a or b

PS: Of course, a Short-cirquit evaluation is not a ternary operator but often the ternary is used in cases where the short circuit would be enough.

git checkout -b your-new-branch

git add <files>

git commit -m <message>

First, checkout your new branch. Then add all the files you want to commit to staging. Lastly, commit all the files you just added. You might want to do a git push origin your-new-branch afterward so your changes show up on the remote.

Try this query (replace t.eventsDate with e.eventsDate):

SELECT e FROM Events e WHERE e.eventsDate BETWEEN :startDate AND :endDate

If you have to set your anchor tag inside the div, you can also use CSS to set the anchor to fill the div via display:block.

As such:

<div style="height: 80px"><a href="#" style="display: block">Text</a></div>

Now when the user floats their cursor in that div the anchor tag will fill the div.

I usually use something like this:

text = '''
    This string was typed to be a demo
    on how could we write a multi-line
    text in Python.
'''

If you want to remove annoying blank spaces in each line, you could do as follows:

text = '\n'.join(line.lstrip() for line in text.splitlines())

Can I just ask about the long term need for this facility - is it for debuging purposes?

If so, then you may want to consider using a proper debugger, such as the one found in Visual Studio, as this allows you to step through the procedure in a more controlled way, and avoids having to constantly add/remove PRINT statement from the procedure.

Just my opinion, but I prefer the debugger approach - for code and databases.

show procedure status

will show you the stored procedures.

show create procedure MY_PROC

will show you the definition of a procedure. And

help show

will show you all the available options for the show command.

If you are using Eloquent, in your model put:

public function getPriceAttribute($price)
{
    return $this->attributes['price'] = sprintf('U$ %s', number_format($price, 2));
}

Where getPriceAttribute is your field on database. getSomethingAttribute.

To add volley as submodule and getting regular updates from the GIT repo the following steps can be followed. Main advantage is, Volley can be customised and source code could be pull from GIT repo whenever update is required.

It is also helping for debugging purpose.

Follow the below steps :

Step I :

Add volley as submodule in Android application project GIT Repo. git submodule add -b master https://android.googlesource.com/platform/frameworks/volley Libraries/Volley

Step II :

In settings.gradle, add the following to add volley as a studio project module. include ':Volley' project(':Volley').projectDir=new File('../Libraries/Volley')

Step III :

In app/build.gradle, add following line to compile Volley compile project(':Volley')

That would be all! Volley has been successfully added in the project.

Every time you want to get the latest code from Google official Volley's repo, just run the below command

git submodule foreach git pull

For more detailed information : https://gitsubmoduleasandroidtudiomodule.blogspot.in/

GIT Repo sample code : https://github.com/arpitratan/AndroidGitSubmoduleAsModule

There's 3 satellites at least that you must be able to receive from of the 24-32 out there, and they each broadcast a time from a synchronized atomic clock. The differences in those times that you receive at any one time tell you how long the broadcast took to reach you, and thus where you are in relation to the satellites. So, it sort of reads from something, but it doesn't connect to that thing. Note that this doesn't tell you your orientation, many GPSes fake that (and speed) by interpolating data points.

If you don't count the cost of the receiver, it's a free service. Apparently there's higher resolution services out there that are restricted to military use. Those are likely a fixed cost for a license to decrypt the signals along with a confidentiality agreement.

Now your device may support GPS tracking, in which case it might communicate, say via GPRS, to a database which will store the location the device has found itself to be at, so that multiple devices may be tracked. That would require some kind of connection.

Maps are either stored on the device or received over a connection. Navigation is computed based on those maps' databases. These likely are a licensed item with a cost associated, though if you use a service like Google Maps they have the license with NAVTEQ and others.

It is just Value, not @value.. Try it. I'm not sure about @Model.title, maybe it's just Model.title

In Rails 4(Using HAML):

=f.text_field :first_name, class: 'form-control', autofocus: true, placeholder: 'First Name'

Actually, both INSTALLPATH/TARGETDIR are correct. It depends on how MSI processes this.

I create a MSG using wixToolSet. In WXS file, there is "Directory" Node, which root dir maybe like the following:

<Directory Id="**TARGETDIR**" Name="SourceDir">;

As you can see: Id is which you should use.

Get the process object using the Process.

>>> import psutil
>>> p = psutil.Process(23442)
>>> p
psutil.Process(pid=23442, name='python3.6', started='09:24:16')
>>> p.kill()
>>> 

Android comes with a built-in YesNoPreference class that does exactly what you want (a confirm dialog with yes and no options). See the official source code here.

Unfortunately, it is in the com.android.internal.preference package, which means it is a part of Android's private APIs and you cannot access it from your application (private API classes are subject to change without notice, hence the reason why Google does not let you access them).

Solution: just re-create the class in your application's package by copy/pasting the official source code from the link I provided. I've tried this, and it works fine (there's no reason why it shouldn't).

You can then add it to your preferences.xml like any other Preference. Example:

<com.example.myapp.YesNoPreference
    android:dialogMessage="Are you sure you want to revert all settings to their default values?"
    android:key="com.example.myapp.pref_reset_settings_key"
    android:summary="Revert all settings to their default values."
    android:title="Reset Settings" />

Which looks like this:

I'm not sure you really want to do what you say you want to do, but it's not for me to reason why!

You cannot add properties to a class after it has been JITed.

The closest you could get would be to dynamically create a subtype with Reflection.Emit and copy the existing fields over, but you'd have to update all references to the the object yourself.

You also wouldn't be able to access those properties at compile time.

Something like:

public class Dynamic
{
    public Dynamic Add<T>(string key, T value)
    {
        AssemblyBuilder assemblyBuilder = AppDomain.CurrentDomain.DefineDynamicAssembly(new AssemblyName("DynamicAssembly"), AssemblyBuilderAccess.Run);
        ModuleBuilder moduleBuilder = assemblyBuilder.DefineDynamicModule("Dynamic.dll");
        TypeBuilder typeBuilder = moduleBuilder.DefineType(Guid.NewGuid().ToString());
        typeBuilder.SetParent(this.GetType());
        PropertyBuilder propertyBuilder = typeBuilder.DefineProperty(key, PropertyAttributes.None, typeof(T), Type.EmptyTypes);

        MethodBuilder getMethodBuilder = typeBuilder.DefineMethod("get_" + key, MethodAttributes.Public, CallingConventions.HasThis, typeof(T), Type.EmptyTypes);
        ILGenerator getter = getMethodBuilder.GetILGenerator();
        getter.Emit(OpCodes.Ldarg_0);
        getter.Emit(OpCodes.Ldstr, key);
        getter.Emit(OpCodes.Callvirt, typeof(Dynamic).GetMethod("Get", BindingFlags.Instance | BindingFlags.NonPublic).MakeGenericMethod(typeof(T)));
        getter.Emit(OpCodes.Ret);
        propertyBuilder.SetGetMethod(getMethodBuilder);

        Type type = typeBuilder.CreateType();

        Dynamic child = (Dynamic)Activator.CreateInstance(type);
        child.dictionary = this.dictionary;
        dictionary.Add(key, value);
        return child;
    }

    protected T Get<T>(string key)
    {
        return (T)dictionary[key];
    }

    private Dictionary<string, object> dictionary = new Dictionary<string,object>();
}

I don't have VS installed on this machine so let me know if there are any massive bugs (well... other than the massive performance problems, but I didn't write the specification!)

Now you can use it:

Dynamic d = new Dynamic();
d = d.Add("MyProperty", 42);
Console.WriteLine(d.GetType().GetProperty("MyProperty").GetValue(d, null));

You could also use it like a normal property in a language that supports late binding (for example, VB.NET)

Just generate ID and check whether it is already present or not in your list of generated IDs.

SQL Server doesn't have a boolean data type. As @Mikael has indicated, the closest approximation is the bit. But that is a numeric type, not a boolean type. In addition, it only supports 2 values - 0 or 1 (and one non-value, NULL).

SQL (standard SQL, as well as T-SQL dialect) describes a Three valued logic. The boolean type for SQL should support 3 values - TRUE, FALSE and UNKNOWN (and also, the non-value NULL). So bit isn't actually a good match here.

Given that SQL Server has no support for the data type, we should not expect to be able to write literals of that "type".

Answering this because I trapped myself with it by now knowing this and maybe it will be useful.

Keep in mind that you cant fetch results twice. You have to save fetch result into array, get row count by count($array), and output results with foreach. For example:

$query = "your_query_here";
$STH = $DBH->prepare($query);
$STH->execute();
$rows = $STH->fetchAll();
//all your results is in $rows array
$STH->setFetchMode(PDO::FETCH_ASSOC);           
if (count($rows) > 0) {             
    foreach ($rows as $row) {
        //output your rows
    }                       
}

Segments of p

Assume p contains all possible finite number combinations. See math.stackexchange question

1. Determine the number of digits needed from the size of the array.
2. Use segments of p places as indexes to determine how to re-order the array. If a segment exceeds the size boundaries for this array, adjust the p decimal offset and start over.
3. Check if the re-ordered array is sorted. If it is woot, else adjust the offset and start over.

You calculate an average by adding all the elements and then dividing by the number of elements.

var total = 0;
for(var i = 0; i < grades.length; i++) {
    total += grades[i];
}
var avg = total / grades.length;

The reason you got 68 as your result is because in your loop, you keep overwriting your average, so the final value will be the result of your last calculation. And your division and multiplication by grades.length cancel each other out.

Yes, for scalar values, a combination of implode and array_slice will do:

$bar = implode(array_slice($array, 0, 1));
$bin = implode(array_slice($array, 1, 1));
$ipsum = implode(array_slice($array, 2, 1));

Or mix it up with array_values and list (thanks @nikic) so that it works with all types of values:

list($bar) = array_values(array_slice($array, 0, 1));

If you need to include non-ASCII alphabetic characters, and if your regex flavor supports Unicode, then

\A\pL+\z

would be the correct regex.

Some regex engines don't support this Unicode syntax but allow the \w alphanumeric shorthand to also match non-ASCII characters. In that case, you can get all alphabetics by subtracting digits and underscores from \w like this:

\A[^\W\d_]+\z

\A matches at the start of the string, \z at the end of the string (^ and $ also match at the start/end of lines in some languages like Ruby, or if certain regex options are set).

this works for me :

1- add class for each row "removeRow"

2- in the jQuery

$(".removeRow").remove();

Connection.Response resp = Jsoup.connect(url) //
                .timeout(20000) //
                .method(Connection.Method.GET) //
                .execute();

actually, the error occurs when you have slow internet so try to maximize the timeout time and then your code will definitely work as it works for me.

This question has been asked many times on this site and the definitive answer is: NO, you can't connect an Android phone to an iPhone over Bluetooth, and YES Apple has restrictions that prevent this.

Some possible alternatives:

1. Bonjour over WiFi, as you mentioned. However, I couldn't find a comprehensive tutorial for it.
2. Some internet based sync service, like Dropbox, Google Drive, Amazon S3. These usually have libraries for several platforms.
3. Direct TCP/IP communication over sockets. (How to write a small (socket) server in iOS)
4. Bluetooth Low Energy will be possible once the issues on the Android side are solved (Communicating between iOS and Android with Bluetooth LE)

Coolest alternative: use the Bump API. It has iOS and Android support and really easy to integrate. For small payloads this can be the most convenient solution.

Details on why you can't connect an arbitrary device to the iPhone. iOS allows only some bluetooth profiles to be used without the Made For iPhone (MFi) certification (HPF, A2DP, MAP...). The Serial Port Profile that you would require to implement the communication is bound to MFi membership. Membership to this program provides you to the MFi authentication module that has to be added to your hardware and takes care of authenticating the device towards the iPhone. Android phones don't have this module, so even though the physical connection may be possible to build up, the authentication step will fail. iPhone to iPhone communication is possible as both ends are able to authenticate themselves.

This is the way to convert a entity to XML File and then compress it:

private  void downloadFile(EntityXML xml) {

string nameDownloadXml = "File_1.xml";
string nameDownloadZip = "File_1.zip";

var serializer = new XmlSerializer(typeof(EntityXML));

Response.Clear();
Response.ClearContent();
Response.ClearHeaders();
Response.AddHeader("content-disposition", "attachment;filename=" + nameDownloadZip);

using (var memoryStream = new MemoryStream())
{
    using (var archive = new ZipArchive(memoryStream, ZipArchiveMode.Create, true))
    {
        var demoFile = archive.CreateEntry(nameDownloadXml);
        using (var entryStream = demoFile.Open())
        using (StreamWriter writer = new StreamWriter(entryStream, System.Text.Encoding.UTF8))
        {
            serializer.Serialize(writer, xml);
        }
    }

    using (var fileStream = Response.OutputStream)
    {
        memoryStream.Seek(0, SeekOrigin.Begin);
        memoryStream.CopyTo(fileStream);
    }
}

Response.End();

}

The issue here is that you've initialized your array, but not its elements; they are all null. So if you try to reference houses[0], it will be null.

Here's a great little helper method you could write for yourself:

T[] InitializeArray<T>(int length) where T : new()
{
    T[] array = new T[length];
    for (int i = 0; i < length; ++i)
    {
        array[i] = new T();
    }

    return array;
}

Then you could initialize your houses array as:

GameObject[] houses = InitializeArray<GameObject>(200);

If your system is using dpkg and apt (debian, ubuntu, etc), try running the following commands in that order (be careful with the sudo rm commands):

sudo apt-get -f install
sudo dpkg -P phpmyadmin  
sudo rm -vf /etc/apache2/conf.d/phpmyadmin.conf
sudo rm -vfR /usr/share/phpmyadmin
sudo service apache2 restart

The guaranteed, rock solid way to force a UIView to re-render is [myView setNeedsDisplay]. If you're having trouble with that, you're likely running into one of these issues:

• You're calling it before you actually have the data, or your -drawRect: is over-caching something.

• You're expecting the view to draw at the moment you call this method. There is intentionally no way to demand "draw right now this very second" using the Cocoa drawing system. That would disrupt the entire view compositing system, trash performance and likely create all kinds of artifacting. There are only ways to say "this needs to be drawn in the next draw cycle."

If what you need is "some logic, draw, some more logic," then you need to put the "some more logic" in a separate method and invoke it using -performSelector:withObject:afterDelay: with a delay of 0. That will put "some more logic" after the next draw cycle. See this question for an example of that kind of code, and a case where it might be needed (though it's usually best to look for other solutions if possible since it complicates the code).

If you don't think things are getting drawn, put a breakpoint in -drawRect: and see when you're getting called. If you're calling -setNeedsDisplay, but -drawRect: isn't getting called in the next event loop, then dig into your view hierarchy and make sure you're not trying to outsmart is somewhere. Over-cleverness is the #1 cause of bad drawing in my experience. When you think you know best how to trick the system into doing what you want, you usually get it doing exactly what you don't want.

hex_string = "".join("%02x" % b for b in array_alpha)

From your post I gather that you want to compare dates, not arrays. If this is the case, then use the appropriate object: a datetime object.

Please check the documentation for the datetime module. Dates are a tough cookie. Use reliable algorithms.

Further to Ryan's answer you will also need to set the DataColumn's Ordinal property if you are dealing with a table-valued parameter with multiple columns whose ordinals are not in alphabetical order.

As an example, if you have the following table value that is used as a parameter in SQL:

CREATE TYPE NodeFilter AS TABLE (
  ID int not null
  Code nvarchar(10) not null,
);

You would need to order your columns as such in C#:

table.Columns["ID"].SetOrdinal(0);
// this also bumps Code to ordinal of 1
// if you have more than 2 cols then you would need to set more ordinals

If you fail to do this you will get a parse error, failed to convert nvarchar to int.

The parser is expecting some HTML content, so it sees & as the beginning of an entity, like è.

Use this workaround:

<script type="text/javascript">
// <![CDATA[
Javascript code here
// ]]>
</script>

so you specify that the code is not HTML text but just data to be used as is.

Conclusion,

to_char works in its own way

So,

Always use this format YYYY-MM-DD for comparison instead of MM-DD-YY or DD-MM-YYYY or any other format

There is another solution from the pandas documentation (that I don't see here),

using the .append

>>> df = pd.DataFrame([[1, 2], [3, 4]], columns=list('AB'))
   A  B
0  1  2
1  3  4
>>> df2 = pd.DataFrame([[5, 6], [7, 8]], columns=list('AB'))
   A  B
0  5  6
1  7  8
>>> df.append(df2, ignore_index=True)
   A  B
0  1  2
1  3  4
2  5  6
3  7  8

The ignore_index=True is used to ignore the index of the appended dataframe, replacing it with the next index available in the source one.

If there are different column names, Nan will be introduced.

Partial answer only

To delete the first item in the array

unset 'array[0]'

To delete the last item in the array

unset 'array[-1]'

You can use this way to remove your remote branch

git remote remove <your remote branch name>

This is how I resolved it:
If you are using Nested ScrollView i.e. ScrollView within a ConstraintLayout then use the following configuration for the ScrollView instead of "WRAP_CONTENT" or "MATCH_PARENT":

<ScrollView
    android:layout_width="0dp"
    android:layout_height="0dp"
    app:layout_constraintStart_toStartOf="parent"
    app:layout_constraintEnd_toEndOf="parent"
    app:layout_constraintBottom_toTopOf="@+id/someOtherWidget"
    app:layout_constraintTop_toTopOf="parent">

just remove them

"ext-intl" : "*"

from your composer.json file.

Because sometimes for some helper functions, the IDE complains that the extension is missing from the composer.json file. Immediately press Alt+Enter to add it to the composer. But that doesn't mean that composer will count them in. The composer will complain next time while doing some operations. So that, we should not blindly type Alt+Enter rather than installing them manually in composer by doing composer install <package-name>.

As I think you have entered it manually, you should remove it, then install it in proper procedure composer install <package-name>

Or else you can run composer update to count that added dependencies in.

For generic class it is necessary to create a wrapper class. For Example:

Set<String>[] sets = new HashSet<>[10]

results in: "Cannot create a generic array"

Use instead:

        class SetOfS{public Set<String> set = new HashSet<>();}
        SetOfS[] sets = new SetOfS[10];  

ToolTip in C# is very easy to add to almost all UI controls. You don't need to add any MouseHover event for this.

This is how to do it-

1. Add a ToolTip object to your form. One object is enough for the entire form. ToolTip toolTip = new ToolTip();

2. Add the control to the tooltip with the desired text.

   toolTip.SetToolTip(Button1,"Click here");

This just removes the highlight class from everything that has the edgetoedge class:

$(".edgetoedge").removeClass("highlight");

I think you want this:

$(".edgetoedge .highlight").removeClass("highlight");

The .edgetoedge .highlight selector will choose everything that is a child of something with the edgetoedge class and has the highlight class.

This is because interfaces do not allow to define the method body in it.but we should have to define the constructor in the same class as interfaces have by default abstract modifier for all the methods to define. That's why we can not define constructor in the interfaces.

Another Variation can be... Be sure to close the file afterwards

import sys
file = open('output.txt', 'a')
sys.stdout = file

print("Hello stackoverflow!") 
print("I have a question.")

file.close()

.zip    application/zip, application/octet-stream

Use this if you also want to consider non-javascript users:

echo ("<SCRIPT LANGUAGE='JavaScript'>
           window.alert('Succesfully Updated')
           window.location.href='http://someplace.com';
       </SCRIPT>
       <NOSCRIPT>
           <a href='http://someplace.com'>Successfully Updated. Click here if you are not redirected.</a>
       </NOSCRIPT>");

You can use strstr to do this.

echo strstr($str, 'www/audio');

If you want to dynamicallly display your Symfony 2 version in pages, for example in footer, you can do it this way.

Create a service:

<?php

namespace Project\Bundle\DuBundle\Twig;

class SymfonyVersionExtension extends \Twig_Extension
{


 public function getFunctions()
 {
 return array(
 //this is the name of the function you will use in twig
 new \Twig_SimpleFunction('symfony_version', array($this, 'b'))
   );
 }

public function getName()
{
//return 'number_employees';
 return 'symfony_version_extension';
}   

public function b()
{
 $symfony_version = \Symfony\Component\HttpKernel\Kernel::VERSION;
 return $symfony_version;
}
}

Register in service.yml

 dut.twig.symfony_version_extension:
    class: Project\Bundle\DutBundle\Twig\SymfonyVersionExtension
    tags:
        - { name: twig.extension }
    #arguments: []

And you can call it anywhere. In Controller, wrap it in JSON, or in pages example footer

 <p> Built With Symfony {{ symfony_version() }} Version MIT License</p>

Now every time you run composer update to update your vendor, symfony version will also automatically update in your template.I know this is overkill but this is how I do it in my projects and it is working.

$('#myform').submit(function() {
  // your code here
})

The above is NOT working in Firefox. The form will just simply submit without running your code first. Also, similar issues are mentioned elsewhere... such as this question. The workaround will be

$('#myform').submit(function(event) {

 event.preventDefault(); //this will prevent the default submit

  // your code here (But not asynchronous code such as Ajax because it does not wait for a response and move to the next line.)
  
 $(this).unbind('submit').submit(); // continue the submit unbind preventDefault
})

function Array2D(x, y)
{
    var array2D = new Array(x);

    for(var i = 0; i < array2D.length; i++)
    {
        array2D[i] = new Array(y);
    }

    return array2D;
}

var myNewArray = Array2D(4, 9);

myNewArray[3][5] = "booger";

Use forEach in combo with Object.entries().

const WALLPAPERS = [{
  WALLPAPER_KEY: 'wallpaper.image',
  WALLPAPER_VALID_KEY: 'wallpaper.image.valid',
}, {
  WALLPAPER_KEY: 'lockscreen.image',
  WALLPAPER_VALID_KEY: 'lockscreen.image.valid',
}];

WALLPAPERS.forEach((obj) => {
  for (const [key, value] of Object.entries(obj)) {
    console.log(`${key} - ${value}`);
  }
});

Somebody posted quite a few form fields to your page. The new default max introduced by the recent security update is 1000.

Try adding the following setting in your web.config's <appsettings> block. in this block you are maximizing the MaxHttpCollection values this will override the defaults set by .net Framework. you can change the value accordingly as per your form needs

<appSettings>
    <add key="aspnet:MaxHttpCollectionKeys" value="2001" />
 </appSettings>

For more information please read this post. For more insight into the security patch by microsoft you can read this Knowledge base article

How about:

table {_x000D_
  table-layout: fixed; _x000D_
  width: 100%;_x000D_
  *margin-left: -100px; /*ie7*/_x000D_
}_x000D_
td, th {_x000D_
  vertical-align: top;_x000D_
  border-top: 1px solid #ccc;_x000D_
  padding: 10px;_x000D_
  width: 100px;_x000D_
}_x000D_
.fix {_x000D_
  position: absolute;_x000D_
  *position: relative; /*ie7*/_x000D_
  margin-left: -100px;_x000D_
  width: 100px;_x000D_
}_x000D_
.outer {_x000D_
  position: relative;_x000D_
}_x000D_
.inner {_x000D_
  overflow-x: scroll;_x000D_
  overflow-y: visible;_x000D_
  width: 400px; _x000D_
  margin-left: 100px;_x000D_
}

<div class="outer">_x000D_
  <div class="inner">_x000D_
    <table>_x000D_
      <tr>_x000D_
        <th class=fix></th>_x000D_
        <th>Col 1</th>_x000D_
        <th>Col 2</th>_x000D_
        <th>Col 3</th>_x000D_
        <th>Col 4</th>_x000D_
        <th class="fix">Col 5</th>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <th class=fix>Header A</th>_x000D_
        <td>col 1 - A</td>_x000D_
        <td>col 2 - A (WITH LONGER CONTENT)</td>_x000D_
        <td>col 3 - A</td>_x000D_
        <td>col 4 - A</td>_x000D_
        <td class=fix>col 5 - A</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <th class=fix>Header B</th>_x000D_
        <td>col 1 - B</td>_x000D_
        <td>col 2 - B</td>_x000D_
        <td>col 3 - B</td>_x000D_
        <td>col 4 - B</td>_x000D_
        <td class=fix>col 5 - B</td>_x000D_
      </tr>_x000D_
      <tr>_x000D_
        <th class=fix>Header C</th>_x000D_
        <td>col 1 - C</td>_x000D_
        <td>col 2 - C</td>_x000D_
        <td>col 3 - C</td>_x000D_
        <td>col 4 - C</td>_x000D_
        <td class=fix>col 5 - C</td>_x000D_
      </tr>_x000D_
    </table>_x000D_
  </div>_x000D_
</div>

You can test it out in this jsbin: http://jsbin.com/uxecel/4/edit

Try gcc -c -I/home/me/development/skia sample.c.

Try this:

$('#foo').css({backgroundColor:'red', color:'white',fontSize:'44px'});

I realize you're looking for a "deep" copy of an array, but if you just have a single level array you can use this:

Copying a native JS Array is easy. Use the Array.slice() method which creates a copy of part/all of the array.

var foo = ['a','b','c','d','e'];
var bar = foo.slice();

now foo and bar are 5 member arrays of 'a','b','c','d','e'

of course bar is a copy, not a reference... so if you did this next...

bar.push('f');
alert('foo:' + foo.join(', '));
alert('bar:' + bar.join(', '));

you would now get:

foo:a, b, c, d, e
bar:a, b, c, d, e, f

To copy all text files to G: and preserve directory structure:

xcopy *.txt /s G:

To generatae comments type /** key before the method declaration and press Enter. It will generage javadoc comment.

Example:

/**
* @param a
* @param b
*/

public void add(int a, int b) {
    //code here
}

For more information check the link https://www.jetbrains.com/idea/features/javadoc.html

There are several possible catches. I think that the most common error is in this part of the connection string:

res://xxx/yyy.csdl|res://xxx/yyy.ssdl|res://xxx/yyy.msl;

This is no magic. Once you understand what is stands for you'll get the connection string right.

First the xxx part. That's nothing else than an assembly name where you defined you EF context clas. Usually it would be something like MyProject.Data. Default value is * which stands for all loaded assemblies. It's always better to specify a particular assembly name.

Now the yyy part. That's a resource name in the xxx assembly. It will usually be something like a relative path to your .edmx file with dots instead of slashes. E.g. Models/Catalog - Models.Catalog The easiest way to get the correct string for your application is to build the xxx assembly. Then open the assembly dll file in a text editor (I prefer the Total Commander's default viewer) and search for ".csdl". Usually there won't be more than 1 occurence of that string.

Your final EF connection string may look like this:

res://MyProject.Data/Models.Catalog.DataContext.csdl|res://MyProject.Data/Models.Catalog.DataContext.ssdl|res://MyProject.Data/Models.Catalog.DataContext.msl;

It entirely depends upon the Certificate Authority who issuing a certificate.

As far as Let's Encrypt CA, they wont issue TLS certificate on public IP address. https://community.letsencrypt.org/t/certificate-for-public-ip-without-domain-name/6082

To know your Certificate authority , you can execute following command and look for an entry marked below.

curl -v -u <username>:<password> "https://IPaddress/.."

First your code is not compiled. Line Long b = 1113;

is wrong. You have to say

Long b = 1113L;

Second when I fixed this compilation problem the code printed "not equals".

Here's my take at it. The assumption is, when the URL changes but there has no click within the document detected, it's a browser back (yes, or forward). A users click is reset after 2 seconds to make this work on pages that load content via Ajax:

(function(window, $) {
  var anyClick, consoleLog, debug, delay;
  delay = function(sec, func) {
    return setTimeout(func, sec * 1000);
  };
  debug = true;
  anyClick = false;
  consoleLog = function(type, message) {
    if (debug) {
      return console[type](message);
    }
  };
  $(window.document).click(function() {
    anyClick = true;
    consoleLog("info", "clicked");
    return delay(2, function() {
      consoleLog("info", "reset click state");
      return anyClick = false;
    });
  });
  return window.addEventListener("popstate", function(e) {
    if (anyClick !== true) {
      consoleLog("info", "Back clicked");
      return window.dataLayer.push({
        event: 'analyticsEvent',
        eventCategory: 'test',
        eventAction: 'test'
      });
    }
  });
})(window, jQuery);

I've done something like this using Spring AOP so I could grab the sql, parameters, errors, and execution time for any query run in the application whether it was HQL, Criteria, or native SQL.

This is obviously fragile, insecure, subject to break with changes in Hibernate, etc, but it illustrates that it's possible to get the SQL:

CriteriaImpl c = (CriteriaImpl)query;
SessionImpl s = (SessionImpl)c.getSession();
SessionFactoryImplementor factory = (SessionFactoryImplementor)s.getSessionFactory();
String[] implementors = factory.getImplementors( c.getEntityOrClassName() );
CriteriaLoader loader = new CriteriaLoader((OuterJoinLoadable)factory.getEntityPersister(implementors[0]),
    factory, c, implementors[0], s.getEnabledFilters());
Field f = OuterJoinLoader.class.getDeclaredField("sql");
f.setAccessible(true);
String sql = (String)f.get(loader);

Wrap the entire thing in a try/catch and use at your own risk.

Then use + to combine strings:

console.log("story " + name + " story");

Of course...

select case substr(status,1,1) -- you're only interested in the first character.
            when 'a' then 'Active'
            when 'i' then 'Inactive'
            when 't' then 'Terminated'
       end as statustext
  from stage.tst

However, there's a few worrying things about this schema. Firstly if you have a column that means something, appending a number onto the end it not necessarily the best way to go. Also, depending on the number of status' you have you might want to consider turning this column into a foreign key to a separate table.

Based on your comment you definitely want to turn this into a foreign key. For instance

create table statuses ( -- Not a good table name :-)
    status varchar2(10)
  , description varchar2(10)
  , constraint pk_statuses primary key (status)
    )

create table tst (
    id number
  , status varchar2(10)
  , constraint pk_tst primary key (id)
  , constraint fk_tst foreign key (status) references statuses (status)
    )

Your query then becomes

select a.status, b.description
  from tst a
  left outer join statuses b
    on a.status = b.status

Here's a SQL Fiddle to demonstrate.

Spark 2.2 onwards

df.filter(df.location.contains('google.com'))

Spark 2.2 documentation link

Spark 2.1 and before

You can use plain SQL in filter

df.filter("location like '%google.com%'")

or with DataFrame column methods

df.filter(df.location.like('%google.com%'))

Spark 2.1 documentation link

Great & best solution from @leviathan. Just translating to swift using FP (functional programming) approach.

self.scrollView.contentSize = self.scrollView.subviews.reduce(CGRect(), { 
  CGRectUnion($0, $1.frame) 
}.size

First I did alias setup on bash / zsh profile.

alias composer="php /usr/local/bin/composer.phar"

Then I moved composer.phar to /usr/local/bin/

cd /usr/local/bin
mv composer.phar composer

Then made composer executable by running

sudo chmod +x composer

No. Regular expressions in Python are handled by the re module.

article = re.sub(r'(?is)</html>.+', '</html>', article)

In general:

text_after = re.sub(regex_search_term, regex_replacement, text_before)

1. Check the trees.config file which located in config folder... sometimes (I don't know why) this file became to be empty like someone delete the content inside... keep backup up of this file in your local pc then when this error appear - replace the server file with your local file. This is what i do when this error happened.

2. check the available space on the server. sometimes this is the problem.

Good luck.

It's an old post, but if anyone is still looking for solution to this kind of problem, here is what I came up with:

<script>
  document.addEventListener("DOMContentLoaded", function(e) {
    document.forms['AddAndEdit'].elements['list'].value = 11;
  });
</script>

If what is happening is that you have another server running on localhost and you want to give this new server a different local hostname like http://teamviewer/

I think that what you are actually looking for is Virtual Hosts functionality. I use Apache so I do not know how other web daemons support this. Maybe it is called Alias. Here is the Apache documentation:

Apache Virtual Hosts examples

You can use an enumerated value just like an integer:

myChoice c;

...

switch( c ) {
case EASY:
    DoStuff();
    break;
case MEDIUM:
    ...
}

If you mean what ports are listening, you can open a command prompt and write:

netstat

You can write:

netstat /?

for an explanation of all options.

You may be looking for position: fixed.

Works everywhere except IE6 and many mobile devices.

I think the code is something like:

int rgb = red;
rgb = (rgb << 8) + green;
rgb = (rgb << 8) + blue;

Also, I believe you can get the individual values using:

int red = (rgb >> 16) & 0xFF;
int green = (rgb >> 8) & 0xFF;
int blue = rgb & 0xFF;

You can pass the event as argument to the function and then prevent the default behaviour.

var OnSubmitTest = React.createClass({
        render: function() {
        doSomething = function(event){
           event.preventDefault();
           alert('it works!');
        }

        return <form onSubmit={this.doSomething}>
        <button>Click me</button>
        </form>;
    }
});

I was looking for something and I found this post. I post this code that managed many-to-many relationships in case someone needs it.

    var UserInRole = db.UsersInRoles.Include(u => u.UserProfile).Include(u => u.Roles)
    .Select (m => new 
    {
        UserName = u.UserProfile.UserName,
        RoleName = u.Roles.RoleName
    });

One possible cause for an item not responding to an event is when the item is overlapped by another. In that case, you may have to set a higher z-index for the item you wish to click on.

i added some exception handling to @Aaron's answer.

import subprocess
import sys

try:
    import pandas as pd
except ImportError:
    subprocess.check_call([sys.executable, "-m", "pip", "install", 'pandas'])
finally:
    import pandas as pd

You can simply change the name of the file by changing the name of the file in the second parameter of move_uploaded_file.

Instead of

move_uploaded_file($_FILES["file"]["tmp_name"], "../img/imageDirectory/" . $_FILES["file"]["name"]);

Use

$temp = explode(".", $_FILES["file"]["name"]);
$newfilename = round(microtime(true)) . '.' . end($temp);
move_uploaded_file($_FILES["file"]["tmp_name"], "../img/imageDirectory/" . $newfilename);

Changed to reflect your question, will product a random number based on the current time and append the extension from the originally uploaded file.

You can use following to achieve desired functionality

"%d:%d:d" % (hours, minutes, seconds)

In your C# code, you are using transaction for the command. Just commit the transaction and after that access your parameter value, you will get the value. Worked for me. :)

There is really no reason to dig through paths; the IDE hands it to you (at least with version 1.5.1).

In the Build menu, select Build APK:

A dialog will appear:

If you are using a newer version of Android Studio, it might look like this:

Clicking the Show in Explorer or locate link, you will be presented with a file explorer positioned somewhere near wherever Android Studio put the APK file:

But in AS 3, when you click locate, it puts you at the app level. You need to go into the release folder to get your APK file.

Came across the same problem and googled out this post. None of the above worked for me. At last I converted my Unicode .xls to .xml (choose Save as ... XML Spreadsheet 2003) and it produced the correct character. Then I wrote code to parse the xml and extracted content for my use.

I tried all above options but was still getting error, in my case issue was I have not setup gradle installation directory in eclipse, following worked:

eclipse -> Window -> Preferences -> Gradle -> "Select Local Installation Directory"

Click on Browse button and provide path.

Even though question is answered, thought to share in case somebody else is facing similar issue.

Cheers !

I got this error briefly after renaming the App_Code folder. Actually, I accidentally dragged the whole folder to the App_data folder. VS 2015 didn't complain it was difficult to spot what had gone wrong.

Since django 1.6 you can use first() method like so:

Content.objects.filter(name="baby").first()

Keep in mind that loading the page has more than one stage. Btw, this is pure JavaScript

"DOMContentLoaded"

This event is fired when the initial HTML document has been completely loaded and parsed, without waiting for stylesheets, images, and subframes to finish loading. At this stage you could programmatically optimize loading of images and css based on user device or bandwidth speed.

Executes after DOM is loaded (before img and css):

document.addEventListener("DOMContentLoaded", function(){
    //....
});

Note: Synchronous JavaScript pauses parsing of the DOM. If you want the DOM to get parsed as fast as possible after the user requested the page, you could turn your JavaScript asynchronous and optimize loading of stylesheets

"load"

A very different event, load, should only be used to detect a fully-loaded page. It is an incredibly popular mistake to use load where DOMContentLoaded would be much more appropriate, so be cautious.

Exectues after everything is loaded and parsed:

window.addEventListener("load", function(){
    // ....
});

MDN Resources:

https://developer.mozilla.org/en-US/docs/Web/Events/DOMContentLoaded https://developer.mozilla.org/en-US/docs/Web/Events/load

MDN list of all events:

https://developer.mozilla.org/en-US/docs/Web/Events

isn't the same as the Winform and Webform way?

listBox1.Items.Clear();

You're on the right track - the keyword you should be googling is Regular Expressions. R does support them in a more direct way than this using grep() and a few other alternatives.

Here's a detailed discussion: http://www.regular-expressions.info/rlanguage.html

If for whatever reason you cannot have the files hosted from a webserver and still need some sort of way of loading partials, you can resort to using the ngTemplate directive.

This way, you can include your markup inside script tags in your index.html file and not have to include the markup as part of the actual directive.

Add this to your index.html

<script type='text/ng-template' id='tpl-productColour'>
 <div class="list-group-item">
    <h3>Hello <em class="pull-right">Brother</em></h3>
</div>
</script>

Then, in your directive:

app.directive('productColor', function() {
      return {
          restrict: 'E', //Element Directive
          //template: 'tpl-productColour'
          templateUrl: 'tpl-productColour'
      };
   }
  );

You don't necessarily have to create a Spring project. Almost all Java web applications have he same project structure. In almost every project I create, I automatically add these source folder:

• src/main/java
• src/main/resources
• src/test/java
• src/test/resources
• src/main/webapp*

src/main/webapp isn't actually a source folder. The web.xml file under src/main/webapp/WEB-INF will allow you to run your java application on any Java enabled web server (Tomcat, Jetty, etc.). I typically add the Jetty Plugin to my POM (assuming you use Maven), and launch the web app in development using mvn clean jetty:run.

As of PostgreSQL 9.4, you can use the ? operator:

select info->>'name' from rabbits where (info->'food')::jsonb ? 'carrots';

You can even index the ? query on the "food" key if you switch to the jsonb type instead:

alter table rabbits alter info type jsonb using info::jsonb;
create index on rabbits using gin ((info->'food'));
select info->>'name' from rabbits where info->'food' ? 'carrots';

Of course, you probably don't have time for that as a full-time rabbit keeper.

Update: Here's a demonstration of the performance improvements on a table of 1,000,000 rabbits where each rabbit likes two foods and 10% of them like carrots:

d=# -- Postgres 9.3 solution
d=# explain analyze select info->>'name' from rabbits where exists (
d(# select 1 from json_array_elements(info->'food') as food
d(#   where food::text = '"carrots"'
d(# );
 Execution time: 3084.927 ms

d=# -- Postgres 9.4+ solution
d=# explain analyze select info->'name' from rabbits where (info->'food')::jsonb ? 'carrots';
 Execution time: 1255.501 ms

d=# alter table rabbits alter info type jsonb using info::jsonb;
d=# explain analyze select info->'name' from rabbits where info->'food' ? 'carrots';
 Execution time: 465.919 ms

d=# create index on rabbits using gin ((info->'food'));
d=# explain analyze select info->'name' from rabbits where info->'food' ? 'carrots';
 Execution time: 256.478 ms

Try below code :

Assign the path of the folder to variable FolderPath before running the below code.

Sub sample()

    Dim FolderPath As String, path As String, count As Integer
    FolderPath = "C:\Documents and Settings\Santosh\Desktop"

    path = FolderPath & "\*.xls"

    Filename = Dir(path)

    Do While Filename <> ""
       count = count + 1
        Filename = Dir()
    Loop

    Range("Q8").Value = count
    'MsgBox count & " : files found in folder"
End Sub

Unfortunately inline elements (or elements having display:inline) ignore the width property. You should use floating divs instead:

<style type="text/css">
div.f1 { float: left; width: 20px; }
div.f2 { float: left; }
div.f3 { clear: both; }
</style>

<div class="f1"></div><div class="f2">The Lazy dog</div><div class="f3"></div>
<div class="f1">AND</div><div class="f2">The Lazy cat</div><div class="f3"></div>
<div class="f1">OR</div><div class="f2">The active goldfish</div><div class="f3"></div>

Now I see you need to use spans and lists, so we need to rewrite this a little bit:

<html><head>
<style type="text/css">
        span.f1 { display: block; float: left; clear: left; width: 60px; }
    li { list-style-type: none; }
    </style>

</head><body>
<ul>
<li><span class="f1">&nbsp;</span>The lazy dog.</li>
<li><span class="f1">AND</span> The lazy cat.</li>
<li><span class="f1">OR</span> The active goldfish.</li>
</ul>
</body>
</html>

There is a trick you can do for Outlook 2007 using conditional html comments.
The code below will make sure that Outlook table is 800px wide, its not max-width but it works better than letting the table span across the entire window.

<!--[if gte mso 9]>
<style>
#tableForOutlook {
  width:800px;
}
</style>
<![endif]-->

<table style="width:98%;max-width:800px">
<!--[if gte mso 9]>
  <table id="tableForOutlook"><tr><td>
<![endif]-->
    <tr><td>
    [Your Content Goes Here]
    </td></tr>
<!--[if gte mso 9]>
  </td></tr></table>
<![endif]-->
<table>

Below is a very simple Java solution which supports the push operation efficient.

Algorithm -

1. Declare two Queues q1 and q2.

2. Push operation - Enqueue element to queue q1.

3. Pop operation - Ensure that queue q2 is not empty. If it is empty, then dequeue all the elements from q1 except the last element and enqueue it to q2 one by one. Dequeue the last element from q1 and store it as the popped element. Swap the queues q1 and q2. Return the stored popped element.

4. Peek operation - Ensure that queue q2 is not empty. If it is empty, then dequeue all the elements from q1 except the last element and enqueue it to q2 one by one. Dequeue the last element from q1 and store it as the peeked element. Enqueue it back to queue q2 and swap the queues q1 and q2. Return the stored peeked element.

Below is the code for above algorithm -

class MyStack {

    java.util.Queue<Integer> q1;
    java.util.Queue<Integer> q2;
    int SIZE = 0;

    /** Initialize your data structure here. */
    public MyStack() {
        q1 = new LinkedList<Integer>();
        q2 = new LinkedList<Integer>();

    }

    /** Push element x onto stack. */
    public void push(int x) {
        q1.add(x);
        SIZE ++;

    }

    /** Removes the element on top of the stack and returns that element. */
    public int pop() {
        ensureQ2IsNotEmpty();
        int poppedEle = q1.remove();
        SIZE--;
        swapQueues();
        return poppedEle;
    }

    /** Get the top element. */
    public int top() {
        ensureQ2IsNotEmpty();
        int peekedEle = q1.remove();
        q2.add(peekedEle);
        swapQueues();
        return peekedEle;
    }

    /** Returns whether the stack is empty. */
    public boolean empty() {
        return q1.isEmpty() && q2.isEmpty();

    }

    /** move all elements from q1 to q2 except last element */
    public void ensureQ2IsNotEmpty() {
        for(int i=0; i<SIZE-1; i++) {
            q2.add(q1.remove());
        }
    }

    /** Swap queues q1 and q2 */
    public void swapQueues() {
        Queue<Integer> temp = q1;
        q1 = q2;
        q2 = temp;
    }
}

Thanks for the responses. I think I've solved the problem just now.

Since LD_PRELOAD is for setting some library proloaded, I check the library that ld preloads with LD_PRELOAD, one of which is "liblunar-calendar-preload.so", that is not existing in the path "/usr/lib/liblunar-calendar-preload.so", but I find a similar library "liblunar-calendar-preload-2.0.so", which is a difference version of the former one.

Then I guess maybe liblunar-calendar-preload.so was updated to a 2.0 version when the system updated, leaving LD_PRELOAD remain to be "/usr/lib/liblunar-calendar-preload.so". Thus the preload library name was not updated to the newest version.

To avoid changing environment variable, I create a symbolic link under the path "/usr/lib"

sudo ln -s liblunar-calendar-preload-2.0.so liblunar-calendar-preload.so

Then I restart bash, the error is gone.

Have a look at the example in this link :

http://docs.angularjs.org/api/ngSanitize.$sanitize

Basically, angular has a directive to insert html into pages. In your case you can insert the html using the ng-bind-html directive like so :

If you already have done all this :

// My magic HTML string function.
function htmlString (str) {
    return "<h1>" + str + "</h1>";
}

function Ctrl ($scope) {
  var str = "HELLO!";
  $scope.htmlString = htmlString(str);
}
Ctrl.$inject = ["$scope"];

Then in your html within the scope of that controller, you could

<div ng-bind-html="htmlString"></div>

Use mapply

> df <- data.frame(x=c(1,2), y=c(3,4), z=c(5,6))
> df
  x y z
1 1 3 5
2 2 4 6
> mapply(function(x,y) x+y, df$x, df$z)
[1] 6 8

> cbind(df,f = mapply(function(x,y) x+y, df$x, df$z) )
  x y z f
1 1 3 5 6
2 2 4 6 8

All modern browsers except IE support SVG

Here is a tutorial that provides step by step guide on how to work with SVG using javascript:

SVG Scripting with JavaScript Part 1: Simple Circle

Like Boldewyn has said already if you want

To do it cross-browser, I strongly recommend RaphaelJS: rapaheljs.com

Although right now I feel the size of the library is too large. It has many great features some of which you might not need.

I would use your suggested code, but with a slight simplification:

KeyGenerator keyGen = KeyGenerator.getInstance("AES");
keyGen.init(256); // for example
SecretKey secretKey = keyGen.generateKey();

Let the provider select how it plans to obtain randomness - don't define something that may not be as good as what the provider has already selected.

This code example assumes (as Maarten points out below) that you've configured your java.security file to include your preferred provider at the top of the list. If you want to manually specify the provider, just call KeyGenerator.getInstance("AES", "providerName");.

For a truly secure key, you need to be using a hardware security module (HSM) to generate and protect the key. HSM manufacturers will typically supply a JCE provider that will do all the key generation for you, using the code above.

To understand why xmlns:android=“http://schemas.android.com/apk/res/android” must be the first in the layout xml file We shall understand the components using an example

Sample::

<FrameLayout xmlns:android="http://schemas.android.com/apk/res/android"
    android:layout_width="match_parent"
    android:layout_height="match_parent"
    android:id="@+id/container" >    
</FrameLayout>

Uniform Resource Indicator(URI):

• In computing, a uniform resource identifier (URI) is a string of characters used to identify a name of a resource.
• Such identification enables interaction with representations of the resource over a network, typically the World Wide Web, using specific protocols.

Ex:http://schemas.android.com/apk/res/android:id is the URI here

XML Namespace:

• XML namespaces are used for providing uniquely named elements and attributes in an XML document. xmlns:android describes the android namespace.
• Its used like this because this is a design choice by google to handle the errors at compile time.
• Also suppose we write our own textview widget with different features compared to android textview, android namespace helps to distinguish between our custom textview widget and android textview widget

An another way is simply :

if($test){
    echo "Yes 1";
}
if(!is_null($test)){
    echo "Yes 2";
}

$test = "hello";

if($test){
    echo "Yes 3";
}

Will return :

"Yes 3"

The best way is to use isset(), otherwise you can have an error like "undefined $test".

You can do it like this :

if( isset($test) && ($test!==null) )

You'll not have any error because the first condition isn't accepted.

If you have the authority to edit the pages to be opened, you can href to 'A' page and in the A page you can put link to B page in onpageload attribute of body tag.

If route is not defined, then check web.php routing file.

Route::get('/map', 'NavigationController@map')->name('map'); // note the name() method.

Then you can use this method in the views:

<a class="nav-link" href="{{ route('map') }}">{{ __('Map') }}</a>

PS: the __('Map') is to translate "Map" to the current language.

And the list of names for routes you can see with artisan command:

php artisan route:list

Yes, Android Supports Java 8 Now (24.1.17)

Now it is possible

But you will need to have your device rom run on java 1.8 and enable "jackOptions" to run it. Jack is the name for the new Android compiler that runs Java 8

https://developer.android.com/guide/platform/j8-jack.html

add these lines to build_gradle

    android {
  ...
  defaultConfig {
    ...
    jackOptions {
      enabled true
    }
  }
  compileOptions {
    sourceCompatibility JavaVersion.VERSION_1_8
    targetCompatibility JavaVersion.VERSION_1_8
  }
}

Java 8 seem to be the running java engine of Android studio 2.0, But it still does not accept the syntax of java 8 after I checked, and you cannot chose a compiler from android studio now. However, you can use the scala plugin if you need functional programming mechanism in your android client.

The Global.asax file, also known as the ASP.NET application file, is an optional file that contains code for responding to application-level and session-level events raised by ASP.NET or by HTTP modules.

http://msdn.microsoft.com/en-us/library/2027ewzw.aspx

Unlike IDs, tags are not used to identify views. Tags are essentially an extra piece of information that can be associated with a view. They are most often used as a convenience to store data related to views in the views themselves rather than by putting them in a separate structure.

Reference: http://developer.android.com/reference/android/view/View.html

SearchDialog or SearchWidget ?

When it comes to implement a search functionality there are two suggested approach by official Android Developer Documentation.
You can either use a SearchDialog or a SearchWidget.
I am going to explain the implementation of Search functionality using SearchWidget.

How to do it with Search widget ?

I will explain search functionality in a RecyclerView using SearchWidget. It's pretty straightforward.

Just follow these 5 Simple steps

1) Add searchView item in the menu

You can add SearchView can be added as actionView in menu using

app:useActionClass = "android.support.v7.widget.SearchView" .

<menu xmlns:android="http://schemas.android.com/apk/res/android"
   xmlns:app="http://schemas.android.com/apk/res-auto"
   xmlns:tools="http://schemas.android.com/tools"
   tools:context="rohksin.com.searchviewdemo.MainActivity">
   <item
       android:id="@+id/searchBar"
       app:showAsAction="always"
       app:actionViewClass="android.support.v7.widget.SearchView"
   />
</menu>

2) Set up SerchView Hint text, listener etc

You should initialize SearchView in the onCreateOptionsMenu(Menu menu) method.

  @Override
  public boolean onCreateOptionsMenu(Menu menu) {
     // Inflate the menu; this adds items to the action bar if it is present.
        getMenuInflater().inflate(R.menu.menu_main, menu);

        MenuItem searchItem = menu.findItem(R.id.searchBar);

        SearchView searchView = (SearchView) searchItem.getActionView();
        searchView.setQueryHint("Search People");
        searchView.setOnQueryTextListener(this);
        searchView.setIconified(false);

        return true;
   }

3) Implement SearchView.OnQueryTextListener in your Activity

OnQueryTextListener has two abstract methods

1. onQueryTextSubmit(String query)
2. onQueryTextChange(String newText

So your Activity skeleton would look like this

YourActivity extends AppCompatActivity implements SearchView.OnQueryTextListener{

     public boolean onQueryTextSubmit(String query)

     public boolean onQueryTextChange(String newText) 

}

4) Implement SearchView.OnQueryTextListener

You can provide the implementation for the abstract methods like this

public boolean onQueryTextSubmit(String query) {

    // This method can be used when a query is submitted eg. creating search history using SQLite DB

    Toast.makeText(this, "Query Inserted", Toast.LENGTH_SHORT).show();
    return true;
}

@Override
public boolean onQueryTextChange(String newText) {

    adapter.filter(newText);
    return true;
}

5) Write a filter method in your RecyclerView Adapter.

Most important part. You can write your own logic to perform search.
Here is mine. This snippet shows the list of Name which contains the text typed in the SearchView

public void filter(String queryText)
{
    list.clear();

    if(queryText.isEmpty())
    {
       list.addAll(copyList);
    }
    else
    {

       for(String name: copyList)
       {
           if(name.toLowerCase().contains(queryText.toLowerCase()))
           {
              list.add(name);
           }
       }

    }

   notifyDataSetChanged();
}

Relevant link:

Full working code on SearchView with an SQLite database in this Music App

Would this relationship not be better expressed as a one-to-many foreign key relationship to a Friends table? I understand that myFriends are just strings but I would think that a better design would be to create a Friend model and have MyClass contain a foreign key realtionship to the resulting table.

Basic Authentication wasn't designed to manage logging out. You can do it, but not completely automatically.

What you have to do is have the user click a logout link, and send a ‘401 Unauthorized’ in response, using the same realm and at the same URL folder level as the normal 401 you send requesting a login.

They must be directed to input wrong credentials next, eg. a blank username-and-password, and in response you send back a “You have successfully logged out” page. The wrong/blank credentials will then overwrite the previous correct credentials.

In short, the logout script inverts the logic of the login script, only returning the success page if the user isn't passing the right credentials.

The question is whether the somewhat curious “don't enter your password” password box will meet user acceptance. Password managers that try to auto-fill the password can also get in the way here.

Edit to add in response to comment: re-log-in is a slightly different problem (unless you require a two-step logout/login obviously). You have to reject (401) the first attempt to access the relogin link, than accept the second (which presumably has a different username/password). There are a few ways you could do this. One would be to include the current username in the logout link (eg. /relogin?username), and reject when the credentials match the username.

it is very simple....

[in make file]

==== 1 ===================

OBJS = ....\

version.o <<== add to your obj lists

==== 2 ===================

DATE = $(shell date +'char szVersionStr[20] = "%Y-%m-%d %H:%M:%S";') <<== add

all:version $(ProgramID) <<== version add at first

version: <<== add

echo '$(DATE)' > version.c  <== add ( create version.c file)

[in program]

=====3 =============

extern char szVersionStr[20];

[ using ]

=== 4 ====

printf( "Version: %s\n", szVersionStr );

I have modified your code a little. Here's a working version (for me):

    <select name="dd1" id="dd1">
       <option value="none">None</option>
       <option value="o1">option 1</option>
       <option value="o2">option 2</option>
       <option value="o3">option 3</option>
    </select>  
    <div style="color:red;" id="msg_id"></div>

<script>
    $('#everything').submit(function(e){ 
        var department = $("#msg_id");
        var msg = "Please select Department";
            if ($('#dd1').val() == "") {
                department.append(msg);
                e.preventDefault();
                return false;
            }
        });
 </script>

Try this:

ggplot(data=dat, aes(x=Types, y=Number, fill=sample)) + 
     geom_bar(position = 'dodge', stat='identity') +
     geom_text(aes(label=Number), position=position_dodge(width=0.9), vjust=-0.25)

alternatively you can put onchange attribute on the dropdownlist itself, that onchange will call certain jquery function like this.

<input type="dropdownlist" onchange="jqueryFunc()">

<script type="text/javascript">
$(function(){
    jqueryFunc(){
        //something goes here
    }
});
</script>

hope this one helps you, and please note that this code is just a rough draft, not tested on any ide. thanks

If you don't want to go through the hassle of adding orientation in each manifest entry of activity better, create a BaseActivity class (inherits 'Activity' or 'AppCompatActivity') which will be inherited by every activity of your application instead of 'Activity' or 'AppCompatActivity' and just add the following piece of code in your BaseActivity:

@Override
protected void onCreate(@Nullable Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setRequestedOrientation (ActivityInfo.SCREEN_ORIENTATION_PORTRAIT);
    // rest of your code......
}

In case you want to use the APK outside the Google Play Store, e.g., private a solution like the following will probably work:

    @Override
    public void onReceivedSslError(WebView view, SslErrorHandler handler, SslError error) {
        /*...*/
        handler.proceed();
    }

In case you want to add an additional optional layer of security, you can try to make use of certificate pinning. IMHO this is not necessary for private or internal usage tough.

If you plan to publish the app on the Google Play Store, then you should avoid @Override onReceivedSslError(...){...}. Especially making use of handler.proceed(). Google will find this code snippet and will reject your app for sure since the solution with handler.proceed() will suppress all kinds of built-in security mechanisms.

And just because of the fact that browsers do not complain about your https connection, it does not mean that the SSL certificate itself is trusted at all!

In my case, the SSL certificate chain was broken. You can quickly test such issues with SSL Checker or more intermediate with SSLLabs. But please do not ask me how this can happen. I have absolutely no clue.

Anyway, after reinstalling the SSL certificate, all errors regarding the "untrusted SSL certificate in WebView whatsoever" disappeared finally. I also removed the @Override for onReceivedSslError(...) and got rid of handler.proceed(), and é voila my app was not rejected by Google Play Store (again).

I was running an older server where I couldn't run install-module because the PowerShell version was 4.0. You can check the PowerShell version using the PowerShell command line

ps>HOST . 

https://gallery.technet.microsoft.com/office/PowerShell-Install-Module-388e47a1

Use this link to download necessary updates. Check to see if your Windows version needs the update.

• don't start android emulator
• Right Click on Project>Run As>Android Application

and then android emulator automatically start

now ok

Parse the JSON string and you can loop through the keys.

var resultJSON = '{"FirstName":"John","LastName":"Doe","Email":"[email protected]","Phone":"123 dead drive"}';_x000D_
var data = JSON.parse(resultJSON);_x000D_
_x000D_
for (var key in data)_x000D_
{_x000D_
    //console.log(key + ' : ' + data[key]);_x000D_
    alert(key + ' --> ' + data[key]);_x000D_
}

I made a solution that works very nice for me:

function shadeColor(color, percent) {

    var R = parseInt(color.substring(1,3),16);
    var G = parseInt(color.substring(3,5),16);
    var B = parseInt(color.substring(5,7),16);

    R = parseInt(R * (100 + percent) / 100);
    G = parseInt(G * (100 + percent) / 100);
    B = parseInt(B * (100 + percent) / 100);

    R = (R<255)?R:255;  
    G = (G<255)?G:255;  
    B = (B<255)?B:255;  

    var RR = ((R.toString(16).length==1)?"0"+R.toString(16):R.toString(16));
    var GG = ((G.toString(16).length==1)?"0"+G.toString(16):G.toString(16));
    var BB = ((B.toString(16).length==1)?"0"+B.toString(16):B.toString(16));

    return "#"+RR+GG+BB;
}

Example Lighten:

shadeColor("#63C6FF",40);

Example Darken:

shadeColor("#63C6FF",-40);

The list from 2020-05-23 is:

31.13.24.0/21
31.13.64.0/18
45.64.40.0/22
66.220.144.0/20
69.63.176.0/20
69.171.224.0/19
74.119.76.0/22
102.132.96.0/20
103.4.96.0/22
129.134.0.0/16
147.75.208.0/20
157.240.0.0/16
173.252.64.0/18
179.60.192.0/22
185.60.216.0/22
185.89.216.0/22
199.201.64.0/22
204.15.20.0/22

The method to fetch this list is already documented on Facebook's Developer site, you can make a whois call to see all IPs assigned to Facebook:

whois -h whois.radb.net -- '-i origin AS32934' | grep ^route

just try this , finally this works for me :

//delete backslashes ( \ ) :
            data = data.replaceAll("[\\\\]{1}[\"]{1}","\"");
//delete first and last double quotation ( " ) :
            data = data.substring(data.indexOf("{"),data.lastIndexOf("}")+1);
            JSONObject json = new JSONObject(data);

This is a useful function for quick and easy xml parsing when an extension is not available:

<?php
/**
 * Convert XML to an Array
 *
 * @param string  $XML
 * @return array
 */
function XMLtoArray($XML)
{
    $xml_parser = xml_parser_create();
    xml_parse_into_struct($xml_parser, $XML, $vals);
    xml_parser_free($xml_parser);
    // wyznaczamy tablice z powtarzajacymi sie tagami na tym samym poziomie
    $_tmp='';
    foreach ($vals as $xml_elem) {
        $x_tag=$xml_elem['tag'];
        $x_level=$xml_elem['level'];
        $x_type=$xml_elem['type'];
        if ($x_level!=1 && $x_type == 'close') {
            if (isset($multi_key[$x_tag][$x_level]))
                $multi_key[$x_tag][$x_level]=1;
            else
                $multi_key[$x_tag][$x_level]=0;
        }
        if ($x_level!=1 && $x_type == 'complete') {
            if ($_tmp==$x_tag)
                $multi_key[$x_tag][$x_level]=1;
            $_tmp=$x_tag;
        }
    }
    // jedziemy po tablicy
    foreach ($vals as $xml_elem) {
        $x_tag=$xml_elem['tag'];
        $x_level=$xml_elem['level'];
        $x_type=$xml_elem['type'];
        if ($x_type == 'open')
            $level[$x_level] = $x_tag;
        $start_level = 1;
        $php_stmt = '$xml_array';
        if ($x_type=='close' && $x_level!=1)
            $multi_key[$x_tag][$x_level]++;
        while ($start_level < $x_level) {
            $php_stmt .= '[$level['.$start_level.']]';
            if (isset($multi_key[$level[$start_level]][$start_level]) && $multi_key[$level[$start_level]][$start_level])
                $php_stmt .= '['.($multi_key[$level[$start_level]][$start_level]-1).']';
            $start_level++;
        }
        $add='';
        if (isset($multi_key[$x_tag][$x_level]) && $multi_key[$x_tag][$x_level] && ($x_type=='open' || $x_type=='complete')) {
            if (!isset($multi_key2[$x_tag][$x_level]))
                $multi_key2[$x_tag][$x_level]=0;
            else
                $multi_key2[$x_tag][$x_level]++;
            $add='['.$multi_key2[$x_tag][$x_level].']';
        }
        if (isset($xml_elem['value']) && trim($xml_elem['value'])!='' && !array_key_exists('attributes', $xml_elem)) {
            if ($x_type == 'open')
                $php_stmt_main=$php_stmt.'[$x_type]'.$add.'[\'content\'] = $xml_elem[\'value\'];';
            else
                $php_stmt_main=$php_stmt.'[$x_tag]'.$add.' = $xml_elem[\'value\'];';
            eval($php_stmt_main);
        }
        if (array_key_exists('attributes', $xml_elem)) {
            if (isset($xml_elem['value'])) {
                $php_stmt_main=$php_stmt.'[$x_tag]'.$add.'[\'content\'] = $xml_elem[\'value\'];';
                eval($php_stmt_main);
            }
            foreach ($xml_elem['attributes'] as $key=>$value) {
                $php_stmt_att=$php_stmt.'[$x_tag]'.$add.'[$key] = $value;';
                eval($php_stmt_att);
            }
        }
    }
    return $xml_array;
}
?>

As was stated, your reader needs to be 'step' scoped. You can accomplish this via the @Scope("step") annotation. It should work for you if you add that annotation to your reader, like the following:

import org.springframework.batch.item.ItemReader;
import org.springframework.beans.factory.annotation.Value;
import org.springframework.stereotype.Component;

@Component("foo-reader")
@Scope("step")
public final class MyReader implements ItemReader<MyData> {
  @Override
  public MyData read() throws Exception {
    //...
  }

  @Value("#{jobParameters['fileName']}")
  public void setFileName(final String name) {
    //...
  }
}

This scope is not available by default, but will be if you are using the batch XML namespace. If you are not, adding the following to your Spring configuration will make the scope available, per the Spring Batch documentation:

<bean class="org.springframework.batch.core.scope.StepScope" />

Running the npm update command solved my problem.

Here is what I ended up doing to work around the error.

First, I set up the database recovery model as SIMPLE. More information here.

Then, by deleting some old files I was able to make 5GB of free space which gave the log file more space to grow.

I reran the DELETE statement sucessfully without any warning.

I thought that by running the DELETE statement the database would inmediately become smaller thus freeing space in my hard drive. But that was not true. The space freed after a DELETE statement is not returned to the operating system inmediatedly unless you run the following command:

DBCC SHRINKDATABASE (MyDb, 0);
GO

More information about that command here.

Why not run something like Nexus, your own maven repo that you can upload 3rd party proprietary jar files, and also proxy other public repositories, to save on bandwith?

This also has some good reasons to run your own maven repository manager.

just window.close() is OK, why should write in jQuery?

Use:

$ dos2unix file
$ grep -v "^$" file

Or just simply awk:

awk 'NF' file

If you don't have dos2unix, then you can use tools like tr:

tr -d '\r' < "$file" > t ; mv t "$file"

Code is here (Win form app):

using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using Microsoft.Win32;

namespace RunAtStartup
{
    public partial class frmStartup : Form
    {
        // The path to the key where Windows looks for startup applications
        RegistryKey rkApp = Registry.CurrentUser.OpenSubKey("SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Run", true);

        public frmStartup()
        {
            InitializeComponent();
            // Check to see the current state (running at startup or not)
            if (rkApp.GetValue("MyApp") == null)
            {
                // The value doesn't exist, the application is not set to run at startup
                chkRun.Checked = false;
            }
            else
            {
                // The value exists, the application is set to run at startup
                chkRun.Checked = true;
            }
        }

        private void btnOk_Click(object sender, EventArgs e)
        {
            if (chkRun.Checked)
            {
                // Add the value in the registry so that the application runs at startup
                rkApp.SetValue("MyApp", Application.ExecutablePath);
            }
            else
            {
                // Remove the value from the registry so that the application doesn't start
                rkApp.DeleteValue("MyApp", false);
            }
        }
    }
}

If you want to know the specific version then you need to check composer.lock file and search For

"name": "laravel/framework",

you will find your version in next line

"version": "v5.7.9",

You need to use ScriptManager.RegisterStartupScript for Ajax.

protected void ButtonPP_Click(object sender, EventArgs e) {     if (radioBtnACO.SelectedIndex < 0)     {         string csname1 = "PopupScript";          var cstext1 = new StringBuilder();         cstext1.Append("alert('Please Select Criteria!')");          ScriptManager.RegisterStartupScript(this, GetType(), csname1,             cstext1.ToString(), true);     } } 

i.ToString("D4");

See MSDN on format specifiers.

you have to float your image container as follows:

HTML

<div id="container">
    <div id="floated">...some other random text</div>
    ...
    some random text
    ...
</div>

CSS

#container{
    width: 400px;
    background: yellow;
}
#floated{
    float: left;
    width: 150px;
    background: red;
}

FIDDLE

http://jsfiddle.net/kYDgL/

As stated above, many languages are available for developing in Android. Java, C, Scala, C++, several scripting languages etc. Thanks to Mono you are also able to develop using C# and the .Net framework. Here you have some speedcomparisions: http://www.youtube.com/watch?v=It8xPqkKxis

I got this error due to deletion of some files. For me simply cloning my project worked.

You can group your specific layout under the correct folder structure as follows.

layout-land-target_version

ie

layout-land-19 // target KitKat

likewise you can create your layouts.

Hope this will help you

Below is Example of simple dropdown using jstl tag

 <form:select path="cityFrom">  
    <form:option value="Ghaziabad" label="Ghaziabad"/>  
    <form:option value="Modinagar" label="Modinagar"/>  
    <form:option value="Meerut" label="Meerut"/>  
    <form:option value="Amristar" label="Amristar"/>  
 </form:select>

Sample DF:

In [79]: df = pd.DataFrame(np.random.randint(5, 15, (10, 3)), columns=list('abc'))

In [80]: df
Out[80]:
    a   b   c
0   6  11  11
1  14   7   8
2  13   5  11
3  13   7  11
4  13   5   9
5   5  11   9
6   9   8   6
7   5  11  10
8   8  10  14
9   7  14  13

present only those rows where b > 10

In [81]: df[df.b > 10]
Out[81]:
   a   b   c
0  6  11  11
5  5  11   9
7  5  11  10
9  7  14  13

Minimums (for all columns) for the rows satisfying b > 10 condition

In [82]: df[df.b > 10].min()
Out[82]:
a     5
b    11
c     9
dtype: int32

Minimum (for the b column) for the rows satisfying b > 10 condition

In [84]: df.loc[df.b > 10, 'b'].min()
Out[84]: 11

UPDATE: starting from Pandas 0.20.1 the .ix indexer is deprecated, in favor of the more strict .iloc and .loc indexers.

I think that this construct: if exists (select... is specific for MS SQL. In MySQL EXISTS predicate tells you whether the subquery finds any rows and it's used like this: SELECT column1 FROM t1 WHERE EXISTS (SELECT * FROM t2);

You can rewrite the above lines of code like this:

DELIMITER $$

CREATE PROCEDURE `checando`(in nombrecillo varchar(30), in contrilla varchar(30), out resultado int)

BEGIN
    DECLARE count_prim INT;
    DECLARE count_sec INT;

    SELECT COUNT(*) INTO count_prim FROM compas WHERE nombre = nombrecillo AND contrasenia = contrilla;
    SELECT COUNT(*) INTO count_sec FROM FROM compas WHERE nombre = nombrecillo;

    if (count_prim > 0) then
        set resultado = 0;
    elseif (count_sec > 0) then
        set resultado = -1;
    else 
        set resultado = -2;
    end if;
    SELECT resultado;
END

All the above mentioned answers will almost fullfill the purpose. However, You need to drop the temp table after all the operation on it. You can follow-

INSERT INTO #TempTable (ID, Date, Name) 
SELECT id, date, name 
FROM physical_table;

IF OBJECT_ID('tempdb.dbo.#TempTable') IS NOT NULL 
    DROP TABLE #TempTable;

If you're looking for something like MySQL's DUMP, then good news: SQL Server 2008 Management Studio added that ability.

In SSMS, just right-click on the DB in question and select Tasks > Generate Scripts. Then in the 2nd page of the options wizard, make sure to select that you'd like the data scripted as well, and it will generate what amounts to a DUMP file for you.

or you can just

<script> 
document.write('<img src="/*picture_location_(you can just copy the picture and paste   it into the script)*\"')
document.getElementById('pic')
</script>
<div id="pic">
</div>

I found this solution:

This query select last not null value for each column.

Example

If you have a table:

id|title|body
1 |t1   |b1
2 |NULL |b2
3 |t3   |NULL

you get:

title|body
t3   |b2

Query

SELECT DISTINCT (

  SELECT title
  FROM test
  WHERE title IS NOT NULL 
  ORDER BY id DESC 
  LIMIT 1
) title, (

  SELECT body
  FROM test
  WHERE body IS NOT NULL 
  ORDER BY id DESC 
  LIMIT 1
) body
FROM test

I hope help you.

Another solution is to use a Predicate, then you can use this in any filter:

public static <T> Predicate<T> distinctBy(Function<? super T, ?> f) {
  Set<Object> objects = new ConcurrentHashSet<>();
  return t -> objects.add(f.apply(t));
}

Then simply reuse the predicate anywhere:

employees.stream().filter(distinctBy(e -> e.getId));

Note: in the JavaDoc of filter, which says it takes a stateless Predicte. Actually, this works fine even if the stream is parallel.

About other solutions:

1) Using .collect(Collectors.toConcurrentMap(..)).values() is a good solution, but it's annoying if you want to sort and keep the order.

2) stream.removeIf(e->!seen.add(e.getID())); is also another very good solution. But we need to make sure the collection implemented removeIf, for example it will throw exception if we construct the collection use Arrays.asList(..).

I have a Windows 7 client on a Mac host and this post was VERY helpful. Thanks.

I would add that I didn't use gparted. I did this:

1. Launch new enlarged vmdk image.
2. Go to Start and right click Computer and select Manage.
3. Click Disk Management
4. You should see some grayed space on your (in my case) C drive
5. Right click the C drive and select Extend Volume.
6. Choose size and go

Sweet! I preferred that to using a 3rd party tool with warnings about data loss.

Cheers!

I know it's not exactly answer to question, but this question is first which appears on Google :)

Problem ("This application has no explicit mapping for /error") appears when trying to access Swagger UI.

In my case problems were caused by @RestController("/endpoint"), which isn't handled properly by swagger.

So, this resulted in errors:

@RestController("/endpoint")
public class EndpointController {

And this was fine

@RestController
@RequestMapping("/endpoint")
public class EndpointController {

In my case I got rid of the exception by replacing SetDataAndType with just SetData.

Use this CSS:

#container {
    width: 400px;
    border: 1px solid red;
}

#fixed {
    position: fixed;
    width: inherit;
    border: 1px solid green;
}

The #fixed element will inherit it's parent width, so it will be 100% of that.

Make your audioSounds and minTime variables as static variables, as you are using them in a static method (playSound).

Marking a method as static prevents the usage of non-static (instance) members in that method.

To understand more , please read this SO QA:

Static keyword in c#

try this

sp1 = String.valueOf(spinner.getSelectedItem());

I realise this is old, but an array filter may do what you need:

var arr = [0, 1, 2].filter(function (count) {
    return count < 1;
});

You can then run arr.forEach and other array functions.

I realise that if you intend to cut down on loop operations altogether, this will probably not do what you want. For that you best use while.

You need:

#include <string.h> /* memset */
#include <unistd.h> /* close */

in your code.

References: POSIX for close, the C standard for memset.

The only easy way to do this is to use snprintf to print to a buffer that's long enough to hold the entire, exact value, then truncate it as a string. Something like:

char buf[2*(DBL_MANT_DIG + DBL_MAX_EXP)];
snprintf(buf, sizeof buf, "%.*f", (int)sizeof buf, x);
char *p = strchr(buf, '.'); // beware locale-specific radix char, though!
p[2+1] = 0;
puts(buf);

Here's the technical answer (expanding on Rowland Shaw's answer).

The Is keyword checks whether the two operands are references to the same object memory, and only returns true if this is the case. I believe it is functionally equivalent to Object.ReferenceEquals. The IsNot keyword is simply shorthand syntax for writing Not ... Is ..., nothing more.

The = (equality) operator compares values and in this case (as in many others) is equivalent to String.Equals. Now, the <> (inequality) operator does not quite have the same analogy as the Is and IsNot keywords, since it can be overriden separately from the = operator depending on the class. I believe the case should always be that it returns the logical inverse of the = operator (and certainly is in the case of String), and just allows for a more efficient comparison to made when testing for inequality rather than equality.

When dealing with strings, unless you actually mean to compare references, always use the = operator (or String.Equals I suppose). In your case, because you are testing for null (Nothing), it seems you need to use the Is or IsNot keyword (the equality operator will fail because it can't compare the values of null objects). Syntactically, the IsNot keyword is a bit nicer here, so go with that.

In a Windows Machine run below command

set NODE_OPTIONS=--max_old_space_size=4096

As you can see, the import command did work but is showing errors because it tried to locate the resources in vendor.css and couldn't find them

You should also upload your project structure and ensure that there aren't any path issues. Also, you could include the css file in the index.html or the Component template and webpack loader would extract it when built

Quick Overview: index and find

Next to the find method there is as well index. find and index both yield the same result: returning the position of the first occurrence, but if nothing is found index will raise a ValueError whereas find returns -1. Speedwise, both have the same benchmark results.

s.find(t)    #returns: -1, or index where t starts in s
s.index(t)   #returns: Same as find, but raises ValueError if t is not in s

Additional knowledge: rfind and rindex:

In general, find and index return the smallest index where the passed-in string starts, and rfind and rindex return the largest index where it starts Most of the string searching algorithms search from left to right, so functions starting with r indicate that the search happens from right to left.

So in case that the likelihood of the element you are searching is close to the end than to the start of the list, rfind or rindex would be faster.

s.rfind(t)   #returns: Same as find, but searched right to left
s.rindex(t)  #returns: Same as index, but searches right to left

Source: Python: Visual QuickStart Guide, Toby Donaldson

I could not understand those 3 rules in the specs too well -- hope to have something that is more plain English -- but here is what I gathered from JavaScript: The Definitive Guide, 6th Edition, David Flanagan, O'Reilly, 2011:

Quote:

JavaScript does not treat every line break as a semicolon: it usually treats line breaks as semicolons only if it can’t parse the code without the semicolons.

Another quote: for the code

var a
a
=
3 console.log(a)

JavaScript does not treat the second line break as a semicolon because it can continue parsing the longer statement a = 3;

and:

two exceptions to the general rule that JavaScript interprets line breaks as semicolons when it cannot parse the second line as a continuation of the statement on the first line. The first exception involves the return, break, and continue statements

... If a line break appears after any of these words ... JavaScript will always interpret that line break as a semicolon.

... The second exception involves the ++ and -- operators ... If you want to use either of these operators as postfix operators, they must appear on the same line as the expression they apply to. Otherwise, the line break will be treated as a semicolon, and the ++ or -- will be parsed as a prefix operator applied to the code that follows. Consider this code, for example:

x 
++ 
y

It is parsed as x; ++y;, not as x++; y

So I think to simplify it, that means:

In general, JavaScript will treat it as continuation of code as long as it makes sense -- except 2 cases: (1) after some keywords like return, break, continue, and (2) if it sees ++ or -- on a new line, then it will add the ; at the end of the previous line.

The part about "treat it as continuation of code as long as it makes sense" makes it feel like regular expression's greedy matching.

With the above said, that means for return with a line break, the JavaScript interpreter will insert a ;

(quoted again: If a line break appears after any of these words [such as return] ... JavaScript will always interpret that line break as a semicolon)

and due to this reason, the classic example of

return
{ 
  foo: 1
}

will not work as expected, because the JavaScript interpreter will treat it as:

return;   // returning nothing
{
  foo: 1
}

There has to be no line-break immediately after the return:

return { 
  foo: 1
}

for it to work properly. And you may insert a ; yourself if you were to follow the rule of using a ; after any statement:

return { 
  foo: 1
};

Replace the checkDataBase() code with the code below:

File dbFile = myContext.getDatabasePath(DB_NAME);
return dbFile.exists();

In Doctrine 2.x you can't pass multiple order by using doctrine 'orderBy' or 'addOrderBy' as above examples. Because, it automatically adds the 'ASC' at the end of the last column name when you left the second parameter blank, such as in the 'orderBy' function.

For an example ->orderBy('a.fist_name ASC, a.last_name ASC') will output SQL something like this 'ORDER BY first_name ASC, last_name ASC ASC'. So this is SQL syntax error. Simply because default of the orderBy or addOrderBy is 'ASC'.

To add multiple order by's you need to use 'add' function. And it will be like this.

->add('orderBy','first_name ASC, last_name ASC'). This will give you the correctly formatted SQL.

More info on add() function. https://www.doctrine-project.org/projects/doctrine-orm/en/2.6/reference/query-builder.html#low-level-api

Hope this helps. Cheers!

I simply added the anaconda3 path to $PATH in .zshrc which did the trick for.

My environment : Catalina / clean Anaconda install / iTerm / zsh / oh-my-zsh

First locate your conda installation:

> find ~/ -name 'conda' -print

(on my system: ~/opt/anaconda3/bin/conda)

Then add that path to PATH in the .zshrc file

export PATH="opt/anaconda3/bin":$PATH

The Linkify class has some pretty useful helper methods that might be relevant, including regular expressions designed to pick up phone numbers and email addresses and such:

http://developer.android.com/reference/android/text/util/Linkify.html

If the directory ../.foo/bar/ doesn't exist, you can't create a file there, so make sure you create the directory first.

Try something like this:

File f = new File("somedirname1/somedirname2/somefilename");
if (!f.getParentFile().exists())
    f.getParentFile().mkdirs();
if (!f.exists())
    f.createNewFile();

A for loop:

for(INIT; TEST; ADVANCE) {
    BODY
}

Means the following:

INIT;
while (true) {
    if (!TEST)
        break;
    BODY;
    ADVANCE;
}

You can write almost any expression for INIT, TEST, ADVANCE, and BODY.

Do note that the ++ operators and variants are operators with side-effects (one should try to avoid them if you are not using them like i+=1 and the like):

• ++i means i+=1; return i
• i++ means oldI=i; i+=1; return oldI

Example:

> i=0
> [i++, i, ++i, i, i--, i, --i, i]
[0, 1, 2, 2, 2, 1, 0, 0]

Export a certificate from a keystore:

keytool -export -alias mydomain -file mydomain.crt -keystore keystore.jks

Walking through a directory tree is a good example. You can do something similar to process an array. Here is a really simple recursive function that simply processes a string, a simple array of strings, or a nested array of strings of any depth, replacing instances of 'hello' with 'goodbye' in the string or the values of the array or any sub-array:

function replaceHello($a) {
    if (! is_array($a)) {
        $a = str_replace('hello', 'goodbye', $a);
    } else {
        foreach($a as $key => $value) {
            $a[$key] = replaceHello($value);
        }
    }
    return $a
}

It knows when to quit because at some point, the "thing" it is processing is not an array. For example, if you call replaceHello('hello'), it will return 'goodbye'. If you send it an array of strings, though it will call itself once for every member of the array, then return the processed array.

Have you tried JQuery? Vanilla javascript can be tough. Try using this:

$('.container-element').add('<div>Insert Div Content</div>');

.container-element is a JQuery selector that marks the element with the class "container-element" (presumably the parent element in which you want to insert your divs). Then the add() function inserts HTML into the container-element.

getContentResolver() is method of class android.content.Context, so to call it you definitely need an instance of Context ( Activity or Service for example).

If you haven't already pushed the commits then you can go back to a previous commit using git reset HEAD^[1,2,3,4...]

For example

git commit <file1> -m "Updated files 1 and 2"
git commit <file3> -m "Updated file 3"

Oops, forgot to add file2 to the first commit...

git reset HEAD^1 // because I only need to go back 1 commit

git add <file2>

This will add file2 to the first commit.

I used the following today - It works!

Add a value to an extensionAttribute

 $ThisUser = Get-ADUser -Identity $User -Properties extensionAttribute1
    Set-ADUser –Identity $ThisUser -add @{"extensionattribute1"="MyString"}

Remove a value from an extensionAttribute

  $ThisUser = Get-ADUser -Identity $User -Properties extensionAttribute1
  Set-ADUser –Identity $ThisUser -Clear "extensionattribute1" 

You need to adjust three (or four) properties:

• Consumer side:fetch.message.max.bytes - this will determine the largest size of a message that can be fetched by the consumer.
• Broker side: replica.fetch.max.bytes - this will allow for the replicas in the brokers to send messages within the cluster and make sure the messages are replicated correctly. If this is too small, then the message will never be replicated, and therefore, the consumer will never see the message because the message will never be committed (fully replicated).
• Broker side: message.max.bytes - this is the largest size of the message that can be received by the broker from a producer.
• Broker side (per topic): max.message.bytes - this is the largest size of the message the broker will allow to be appended to the topic. This size is validated pre-compression. (Defaults to broker's message.max.bytes.)

I found out the hard way about number 2 - you don't get ANY exceptions, messages, or warnings from Kafka, so be sure to consider this when you are sending large messages.

As of npm@5, the npm cache self-heals from corruption issues and data extracted from the cache is guaranteed to be valid. If you want to make sure everything is consistent, use npm cache verify instead. On the other hand, if you're debugging an issue with the installer, you can use npm install --cache /tmp/empty-cache to use a temporary cache instead of nuking the actual one.

If you're sure you want to delete the entire cache, rerun:

npm cache clean --force

A complete log of this run can be found in /Users/USERNAME/.npm/_logs/2019-01-08T21_29_30_811Z-debug.log.

(Since I don't seem to have enough reputation to vote down the answer...)

Wolf wrote:

Calling length property on undefined or a null object will cause IE and webkit browsers to fail!

Instead try this:

 // NOTE!! THE FOLLOWING IS WRONG; DO NOT USE!  -- EleotleCram
if($("#something") !== null){
  // do something
}

or

 // NOTE!! THE FOLLOWING IS WRONG; DO NOT USE!  -- EleotleCram
if($("#something") === null){
  // don't do something
}

While it is true that calling the length property on an undefined or null object will cause browsers to fail, the result of jQuery's selectors (the $('...')) will never be null or undefined. Thus the code suggestions make no sense. Use one of the other answers, they make more sense.

(Update 2012) Because people look at code and this answer is pretty high up the list: For the last couple of years, I have been using this small plugin:

  jQuery.fn['any'] = function() {
     return (this.length > 0);
  };

I think $('div').any() reads better than $('div').length, plus you won't suffer as much from typos: $('div').ayn() will give a runtime error, $('div').lenght will silently most likely always be falsy.

__
Edits november 2012:

1) Because people tend to look at code and not read what is said around the code, I added two big caveat lector notes to the quoted code of Wolf.
2) I added code of the small plugin I use for this situation.

you need to type it in cmd not in the IDLE. becuse IDLE is not an command prompt if you want to install something from IDLE type this

>>>from pip.__main__ import _main as main
>>>main(#args splitted by space in list example:['install', 'requests'])

this is calling pip like pip <commands> in terminal. The commands will be seperated by spaces that you are doing there to.

Remove these two lines:

xmlHttp.setRequestHeader("Content-length", params.length);
xmlHttp.setRequestHeader("Connection", "close");

XMLHttpRequest isn't allowed to set these headers, they are being set automatically by the browser. The reason is that by manipulating these headers you might be able to trick the server into accepting a second request through the same connection, one that wouldn't go through the usual security checks - that would be a security vulnerability in the browser.

If it is a GET service, then you need to use it with a GET method, not a POST method. Your problem is a type mismatch. A different example of type mismatch (to put severity into perspective) is trying to assign a string to an integer variable.

Using Guava library, another option is to convert the Iterable to a List.

List list = Lists.newArrayList(some_iterator);
int count = list.size();

Use this if you need also to access the elements of the iterator after getting its size. By using Iterators.size() you no longer can access the iterated elements.

I like using this tool to permit easily to send email HTML and TXT with easy context processing: https://github.com/divio/django-emailit

I arrived here because I thought I should check in SO if there are adequate answers, after a syntax error that gave me this error, or if I could possibly post an answer myself.

OK, the answers here explain what this error is, so not much more to say, but nevertheless I will give my 2 cents using my words:

This error is caused by the fact that you basically generate a new table with your subquery for the FROM command.

That's what a derived table is, and as such, it needs to have an alias (actually a name reference to it).

So given the following hypothetical query:

SELECT id, key1
FROM (
    SELECT t1.ID id, t2.key1 key1, t2.key2 key2, t2.key3 key3
    FROM table1 t1 
    LEFT JOIN table2 t2 ON t1.id = t2.id
    WHERE t2.key3 = 'some-value'
) AS tt

So, at the end, the whole subquery inside the FROM command will produce the table that is aliased as tt and it will have the following columns id, key1, key2, key3.

So, then with the initial SELECT from that table we finally select the id and key1 from the tt.