var t = document.getElementById("p").textContent;
var y = document.createTextNode("This just got added");
t.appendChild(y);
_x000D_
<p id="p">This is some text</p>
_x000D_
add your script tag on the bottom of the body tag. so that script loads after html content then you won't get such error and add=
This is what I used to use a csv file into an array. Couldn't get the above answers to work, but this worked for me.
$(document).ready(function() {
"use strict";
$.ajax({
type: "GET",
url: "../files/icd10List.csv",
dataType: "text",
success: function(data) {processData(data);}
});
});
function processData(icd10Codes) {
"use strict";
var input = $.csv.toArrays(icd10Codes);
$("#test").append(input);
}
Used the jQuery-CSV Plug-in linked above.
In JSFiddle, when you set the wrapping to "onLoad" or "onDomready", the functions you define are only defined inside that block, and cannot be accessed by outside event handlers.
Easiest fix is to change:
function something(...)
To:
window.something = function(...)
You were almost there:
You just need to append the li
to ul
and voila!
So just add
ul.appendChild(li);
to the end of your function so the end function will be like this:
function function1() {
var ul = document.getElementById("list");
var li = document.createElement("li");
li.appendChild(document.createTextNode("Element 4"));
ul.appendChild(li);
}
To facilitate svg editing you can use an intermediate function:
function getNode(n, v) {
n = document.createElementNS("http://www.w3.org/2000/svg", n);
for (var p in v)
n.setAttributeNS(null, p, v[p]);
return n
}
Now you can write:
svg.appendChild( getNode('rect', { width:200, height:20, fill:'#ff0000' }) );
Example (with an improved getNode function allowing camelcase for property with dash, eg strokeWidth > stroke-width):
function getNode(n, v) {_x000D_
n = document.createElementNS("http://www.w3.org/2000/svg", n);_x000D_
for (var p in v)_x000D_
n.setAttributeNS(null, p.replace(/[A-Z]/g, function(m, p, o, s) { return "-" + m.toLowerCase(); }), v[p]);_x000D_
return n_x000D_
}_x000D_
_x000D_
var svg = getNode("svg");_x000D_
document.body.appendChild(svg);_x000D_
_x000D_
var r = getNode('rect', { x: 10, y: 10, width: 100, height: 20, fill:'#ff00ff' });_x000D_
svg.appendChild(r);_x000D_
_x000D_
var r = getNode('rect', { x: 20, y: 40, width: 100, height: 40, rx: 8, ry: 8, fill: 'pink', stroke:'purple', strokeWidth:7 });_x000D_
svg.appendChild(r);
_x000D_
You set an element's id by setting its corresponding property:
myPara.id = ID;
now append is a method in JavaScript
MDN documentation on append method
Quoting MDN
The
ParentNode.append
method inserts a set of Node objects orDOMString
objects after the last child of theParentNode
.DOMString
objects are inserted as equivalent Text nodes.
This is not supported by IE and Edge but supported by Chrome(54+), Firefox(49+) and Opera(39+).
The JavaScript's append is similar to jQuery's append.
You can pass multiple arguments.
var elm = document.getElementById('div1');
elm.append(document.createElement('p'),document.createElement('span'),document.createElement('div'));
console.log(elm.innerHTML);
_x000D_
<div id="div1"></div>
_x000D_
<!DOCTYPE html>
<html>
<body>
<p id="p1">
<b>Enter the no of row and column to create table:</b>
<br/><br/>
<table>
<tr>
<th>No. of Row(s) </th>
<th>No. of Column(s)</th>
</tr>
<tr>
<td><input type="text" id="row" value="4" /> X</td>
<td><input type="text" id="col" value="7" />Y</td>
</tr>
</table>
<br/>
<button id="create" onclick="create()">create table</button>
</p>
<br/><br/>
<input type="button" value="Reload page" onclick="reloadPage()">
<script>
function create() {
var row = parseInt(document.getElementById("row").value);
var col = parseInt(document.getElementById("col").value);
var tablestart="<table id=myTable border=1>";
var tableend = "</table>";
var trstart = "<tr bgcolor=#ff9966>";
var trend = "</tr>";
var tdstart = "<td>";
var tdend = "</td>";
var data="data in cell";
var str1=tablestart + trstart + tdstart + data + tdend + trend + tableend;
document.write(tablestart);
for (var r=0;r<row;r++) {
document.write(trstart);
for(var c=0; c<col; c++) {
document.write(tdstart+"Row."+r+" Col."+c+tdend);
}
}
document.write(tableend);
document.write("<br/>");
var s="<button id="+"delete"+" onclick="+"deleteTable()"+">Delete top Row </button>";
document.write(s);
var relod="<button id="+"relod"+" onclick="+"reloadPage()"+">Reload Page </button>";
document.write(relod);
}
function deleteTable() {
var dr=0;
if(confirm("It will be deleted..!!")) {
document.getElementById("myTable").deleteRow(dr);
}
}
function reloadPage(){
location.reload();
}
</script>
</body>
</html>
Your code works well you just mistyped this line of code:
document.getElementbyId('lc').appendChild(element);
change it with this: (The "B" should be capitalized.)
document.getElementById('lc').appendChild(element);
HERE IS MY EXAMPLE:
<html>_x000D_
<head>_x000D_
_x000D_
<script>_x000D_
_x000D_
function test() {_x000D_
_x000D_
var element = document.createElement("div");_x000D_
element.appendChild(document.createTextNode('The man who mistook his wife for a hat'));_x000D_
document.getElementById('lc').appendChild(element);_x000D_
_x000D_
}_x000D_
_x000D_
</script>_x000D_
_x000D_
</head>_x000D_
<body>_x000D_
<input id="filter" type="text" placeholder="Enter your filter text here.." onkeyup = "test()" />_x000D_
_x000D_
<div id="lc" style="background: blue; height: 150px; width: 150px;_x000D_
}" onclick="test();"> _x000D_
</div>_x000D_
</body>_x000D_
_x000D_
</html>
_x000D_
firstElementChild might not be available in IE<9 (only firstChild)
on IE<9 firstChild is the firstElementChild because MS DOM (IE<9) is not storing empty text nodes. But if you do so on other browsers they will return empty text nodes...
my solution
child=(elem.firstElementChild||elem.firstChild)
this will give the firstchild even on IE<9
This is a slight variation of the above theme but I'm putting here in case others hit this and cannot make sense of it ...as I did.
When using saveXML(), preserveWhiteSpace in the target DOMdocument does not apply to imported nodes (as at PHP 5.6).
Consider the following code:
$dom = new DOMDocument(); //create a document
$dom->preserveWhiteSpace = false; //disable whitespace preservation
$dom->formatOutput = true; //pretty print output
$documentElement = $dom->createElement("Entry"); //create a node
$dom->appendChild ($documentElement); //append it
$message = new DOMDocument(); //create another document
$message->loadXML($messageXMLtext); //populate the new document from XML text
$node=$dom->importNode($message->documentElement,true); //import the new document content to a new node in the original document
$documentElement->appendChild($node); //append the new node to the document Element
$dom->saveXML($dom->documentElement); //print the original document
In this context, the $dom->saveXML();
statement will NOT pretty print the content imported from $message, but content originally in $dom will be pretty printed.
In order to achieve pretty printing for the entire $dom document, the line:
$message->preserveWhiteSpace = false;
must be included after the $message = new DOMDocument();
line - ie. the document/s from which the nodes are imported must also have preserveWhiteSpace = false.
You must create td and text nodes within loop. Your code creates only 2 td, so only 2 are visible. Example:
var table = document.createElement('table');
for (var i = 1; i < 4; i++){
var tr = document.createElement('tr');
var td1 = document.createElement('td');
var td2 = document.createElement('td');
var text1 = document.createTextNode('Text1');
var text2 = document.createTextNode('Text2');
td1.appendChild(text1);
td2.appendChild(text2);
tr.appendChild(td1);
tr.appendChild(td2);
table.appendChild(tr);
}
document.body.appendChild(table);
The following complete example will read an existing server.xml
file from the current directory, append a new Server and re-write the file to server.xml
. It does not work without an existing .xml file, so you will need to modify the code to handle that case.
import java.util.*;
import javax.xml.transform.*;
import javax.xml.transform.stream.*;
import javax.xml.transform.dom.*;
import org.w3c.dom.*;
import javax.xml.parsers.*;
public class AddXmlNode {
public static void main(String[] args) throws Exception {
DocumentBuilderFactory documentBuilderFactory = DocumentBuilderFactory.newInstance();
DocumentBuilder documentBuilder = documentBuilderFactory.newDocumentBuilder();
Document document = documentBuilder.parse("server.xml");
Element root = document.getDocumentElement();
Collection<Server> servers = new ArrayList<Server>();
servers.add(new Server());
for (Server server : servers) {
// server elements
Element newServer = document.createElement("server");
Element name = document.createElement("name");
name.appendChild(document.createTextNode(server.getName()));
newServer.appendChild(name);
Element port = document.createElement("port");
port.appendChild(document.createTextNode(Integer.toString(server.getPort())));
newServer.appendChild(port);
root.appendChild(newServer);
}
DOMSource source = new DOMSource(document);
TransformerFactory transformerFactory = TransformerFactory.newInstance();
Transformer transformer = transformerFactory.newTransformer();
StreamResult result = new StreamResult("server.xml");
transformer.transform(source, result);
}
public static class Server {
public String getName() { return "foo"; }
public Integer getPort() { return 12345; }
}
}
Example server.xml file:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<Servers>
<server>
<name>something</name>
<port>port</port>
</server>
</Servers>
The main change to your code is not creating a new "root" element. The above example just uses the current root node from the existing server.xml
and then just appends a new Server element and re-writes the file.
I think you are creating a document that looks like this:
<mycatch>
....
</mycatch>
<mycatch>
....
</mycatch>
This is not a valid XML document as it has more than one root element. You must have a single top-level element, as in
<mydocument>
<mycatch>
....
</mycatch>
<mycatch>
....
</mycatch>
....
</mydocument>
Here's a function that will dynamically create a CSS rule in all major browsers. createCssRule
takes a selector (e.g. "p.purpleText"), a rule (e.g. "color: purple;") and optionally a Document
(the current document is used by default):
var addRule;
if (typeof document.styleSheets != "undefined" && document.styleSheets) {
addRule = function(selector, rule) {
var styleSheets = document.styleSheets, styleSheet;
if (styleSheets && styleSheets.length) {
styleSheet = styleSheets[styleSheets.length - 1];
if (styleSheet.addRule) {
styleSheet.addRule(selector, rule)
} else if (typeof styleSheet.cssText == "string") {
styleSheet.cssText = selector + " {" + rule + "}";
} else if (styleSheet.insertRule && styleSheet.cssRules) {
styleSheet.insertRule(selector + " {" + rule + "}", styleSheet.cssRules.length);
}
}
}
} else {
addRule = function(selector, rule, el, doc) {
el.appendChild(doc.createTextNode(selector + " {" + rule + "}"));
};
}
function createCssRule(selector, rule, doc) {
doc = doc || document;
var head = doc.getElementsByTagName("head")[0];
if (head && addRule) {
var styleEl = doc.createElement("style");
styleEl.type = "text/css";
styleEl.media = "screen";
head.appendChild(styleEl);
addRule(selector, rule, styleEl, doc);
styleEl = null;
}
};
createCssRule("body", "background-color: purple;");
Normally you are not supposed to mess with the prototype of built-in types but here is a hack/shortcut:
Object.defineProperty(Array.prototype, 'last', {
get() {
return this[this.length - 1];
}
});
This will allow all array objects to have a last
property, which you can use like so:
const letters = ['a', 'b', 'c', 'd', 'e'];
console.log(letters.last); // 'e'
You are not supposed to mess with a built-in type's prototype because you never when a new ES version will be released and in the event that a new version uses the same property name as your custom property, all sorts of breaks can happen. You COULD make the property to something that you know an ES version would, like lastItem
but that is at the discretion of the developer.
It's easier to use jquery $(parent).html(code)
instead of parent.innerHTML = code
:
var oldDocumentWrite = document.write;
var oldDocumentWriteln = document.writeln;
try {
document.write = function(code) {
$(parent).append(code);
}
document.writeln = function(code) {
document.write(code + "<br/>");
}
$(parent).html(html);
} finally {
$(window).load(function() {
document.write = oldDocumentWrite
document.writeln = oldDocumentWriteln
})
}
This also works with scripts that use document.write
and scripts loaded via src
attribute. Unfortunately even this doesn't work with Google AdSense scripts.
I dont think you need any complicated script for this. Just use
get_string=(el)=>el.outerHTML;
You can create a function:
function changeInputType(oldObj, oTyp, nValue) {
var newObject = document.createElement('input');
newObject.type = oTyp;
if(oldObj.size) newObject.size = oldObj.size;
if(oldObj.value) newObject.value = nValue;
if(oldObj.name) newObject.name = oldObj.name;
if(oldObj.id) newObject.id = oldObj.id;
if(oldObj.className) newObject.className = oldObj.className;
oldObj.parentNode.replaceChild(newObject,oldObj);
return newObject;
}
And you do a call like:
changeInputType(document.getElementById('DATE_RANGE_VALUE'), 'checkbox', 7);
As neat solution, try-
$ open -a /Applications/Utilities/Terminal.app *.py
or
$ open -b com.apple.terminal *.py
For the shell launched, you can go to Preferences > Shell > set it to exit if no error.
That's it.
TL;DR Use Activity.startActivityForResult
Long answer:
You should start by reading the Android developer documentation. Specifically the topic of your question is covered in the Starting Activities and Getting Results
section of the Activity
documentation.
As for example code, the Android SDK provides good examples. Also, other answers here give you short snippets of sample code to use.
However, if you are looking for alternatives, read this SO question. This is a good discussion on how to use startActivityForResults
with fragments, as well as couple othe approaches for passing data between activities.
Try this:
<add name="Access-Control-Allow-Origin" value="['URL1','URL2',...]" />
Where $GIT_DIR is the path to the folder to be searched (the git repo path), execute the following in terminal.
find $GIT_DIR -name *.git* -ok rm -Rf {} \;
This will recursively search for any directories or files containing ".git" in the file/directory name within the specified Git directory. This will include .git/ and .gitignore files and any other .git-like assets. The command is interactive and will ask before removing. To proceed with the deletion, simply enter y, then Enter.
Do you want to do it automatically or manually? If manually, a JAR file is really just a ZIP file, so you should be able to open it with any ZIP reader. (You may need to change the extension first.) If you want to update the JAR file automatically via Eclipse, you may want to look into Ant support in Eclipse and look at the zip task.
import re
s = "many fancy word \nhello \thi"
re.split('\s+', s)
You're supposed to use setImageResource
instead of setBackgroundResource
.
The String being null is a very good chance, but when you see values in your table, yet a null is printed by the ResultSet, it might mean that the connection was closed before the value of ResultSet was used.
Class.forName("org.sqlite.JDBC");
con = DriverManager.getConnection("jdbc:sqlite:My_db.db");
String sql = ("select * from cust where cust_id='" + cus + "'");
pst = con.prepareStatement(sql);
rs = pst.executeQuery();
con.close();
System.out.println(rs.getString(1));
Would print null
even if there are values.
Class.forName("org.sqlite.JDBC");
con = DriverManager.getConnection("jdbc:sqlite:My_db.db");
String sql = ("select * from cust where cust_id='" + cus + "'");
pst = con.prepareStatement(sql);
rs = pst.executeQuery();
System.out.println(rs.getString(1));
con.close();
Wouldn't print null
if there are values in the table.
Shorter answer: no, you must encode a space; it is correct to encode a space as +
, but only in the query string; in the path you must use %20
.
declare your asyncTask in your activity:
private YourAsyncTask mTask;
instantiate it like this:
mTask = new YourAsyncTask().execute();
kill/cancel it like this:
mTask.cancel(true);
in PHP
$set=array('A','B','C','D');
function permutate($set) {
$b=array();
foreach($set as $key=>$value) {
if(count($set)==1) {
$b[]=$set[$key];
}
else {
$subset=$set;
unset($subset[$key]);
$x=permutate($subset);
foreach($x as $key1=>$value1) {
$b[]=$value.' '.$value1;
}
}
}
return $b;
}
$x=permutate($set);
var_export($x);
std::string getfilename(std::string path)
{
path = path.substr(path.find_last_of("/\\") + 1);
size_t dot_i = path.find_last_of('.');
return path.substr(0, dot_i);
}
If you use JSON properly, you can have nested object without any issue :
var xmlhttp = new XMLHttpRequest(); // new HttpRequest instance
var theUrl = "/json-handler";
xmlhttp.open("POST", theUrl);
xmlhttp.setRequestHeader("Content-Type", "application/json;charset=UTF-8");
xmlhttp.send(JSON.stringify({ "email": "[email protected]", "response": { "name": "Tester" } }));
This is actually coming very late, but I thought I should share,
in index.html
<script type="text/javascript" src="1.js"></script>
<script type="text/javascript" src="2.js"></script>
in 1.js
fn1 = function() {
alert("external fn clicked");
}
in 2.js
fn1()
Looking at this MSDN Forum Posting it suggests comparing the Cell's value with Cell.TrueValue.
So going by its example your code should looks something like this:(this is completely untested)
Edit: it seems that the Default for Cell.TrueValue for an Unbound DataGridViewCheckBox is null you will need to set it in the Column definition.
private void chkItems_CheckedChanged(object sender, EventArgs e)
{
foreach (DataGridViewRow row in dataGridView1.Rows)
{
DataGridViewCheckBoxCell chk = (DataGridViewCheckBoxCell)row.Cells[1];
if (chk.Value == chk.TrueValue)
{
chk.Value = chk.FalseValue;
}
else
{
chk.Value = chk.TrueValue;
}
}
}
This code is working note setting the TrueValue and FalseValue in the Constructor plus also checking for null:
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
DataGridViewCheckBoxColumn CheckboxColumn = new DataGridViewCheckBoxColumn();
CheckboxColumn.TrueValue = true;
CheckboxColumn.FalseValue = false;
CheckboxColumn.Width = 100;
dataGridView1.Columns.Add(CheckboxColumn);
dataGridView1.Rows.Add(4);
}
private void chkItems_CheckedChanged(object sender, EventArgs e)
{
foreach (DataGridViewRow row in dataGridView1.Rows)
{
DataGridViewCheckBoxCell chk = (DataGridViewCheckBoxCell)row.Cells[0];
if (chk.Value == chk.FalseValue || chk.Value == null)
{
chk.Value = chk.TrueValue;
}
else
{
chk.Value = chk.FalseValue;
}
}
dataGridView1.EndEdit();
}
}
Make sure you can run powershell scripts (it is disabled by default). Likely you have already done this. http://technet.microsoft.com/en-us/library/ee176949.aspx
Set-ExecutionPolicy RemoteSigned
Run this python script on your powershell script helloworld.py
:
# -*- coding: iso-8859-1 -*-
import subprocess, sys
p = subprocess.Popen(["powershell.exe",
"C:\\Users\\USER\\Desktop\\helloworld.ps1"],
stdout=sys.stdout)
p.communicate()
This code is based on python3.4 (or any 3.x series interpreter), though it should work on python2.x series as well.
C:\Users\MacEwin\Desktop>python helloworld.py
Hello World
In Ruby 2.5 you can now use Dir.children
. It gets filenames as an array except for "." and ".."
Example:
Dir.children("testdir") #=> ["config.h", "main.rb"]
The event when user releases his finger is MotionEvent.ACTION_UP
. I'm not aware if there are any guidelines which prohibit using View.OnTouchListener instead of onClick(), most probably it depends of situation.
Here's a sample code:
imageButton.setOnTouchListener(new OnTouchListener() {
@Override
public boolean onTouch(View v, MotionEvent event) {
if(event.getAction() == MotionEvent.ACTION_UP){
// Do what you want
return true;
}
return false;
}
});
WHERE column_name LIKE '%save 50[%] off!%'
IPHostEntry ipHostInfo = Dns.GetHostEntry(serverName);
IPAddress ipAddress = ipHostInfo.AddressList
.FirstOrDefault(a => a.AddressFamily == AddressFamily.InterNetwork);
Just to clarify my comment (it's illegible in a single line)
I think the best answer is the comment by Mike Chambers in this link (http://www.judahfrangipane.com/blog/2007/02/15/error-2032-stream-error/) by Hunter McMillen.
A note from Mike Chambers:
If you run into this using URLLoader, listen for the:
flash.events.HTTPStatusEvent.HTTP_STATUS
and in AIR :
flash.events.HTTPStatusEvent.HTTP_RESPONSE_STATUS
It should give you some more information (such as the status code being returned from the server).
What about performance?
scope.applyAsync
to reduce overall digest cycles countfunction debounce(func, wait) {
var timeout;
return function () {
var context = this, args = arguments;
var later = function () {
timeout = null;
func.apply(context, args);
};
if (!timeout) func.apply(context, args);
clearTimeout(timeout);
timeout = setTimeout(later, wait);
};
}
angular.module('app.layout')
.directive('classScroll', function ($window) {
return {
restrict: 'A',
link: function (scope, element) {
function toggle() {
angular.element(element)
.toggleClass('class-scroll--scrolled',
window.pageYOffset > 0);
scope.$applyAsync();
}
angular.element($window)
.on('scroll', debounce(toggle, 50));
toggle();
}
};
});
3. If you don't need to trigger watchers/digests at all then use compile
.directive('classScroll', function ($window, utils) {
return {
restrict: 'A',
compile: function (element, attributes) {
function toggle() {
angular.element(element)
.toggleClass(attributes.classScroll,
window.pageYOffset > 0);
}
angular.element($window)
.on('scroll', utils.debounce(toggle, 50));
toggle();
}
};
});
And you can use it like <header class-scroll="header--scrolled">
Try the below JS
$(function() {
$('#type').change(function(){
$('#row_dim').hide();
if ($(this).val() == 'parcel')
{
$('#row_dim').show();
}
});
});
The error is caused by missing jar files. My simple solution is just by copying all the files that does not resolve to the C:\Program Files\Android\Android Studio\gradle\m2repository... (your file path may be different). I got around 6 dependencies that cannot be resolved, junit is one of them and the others are com and org and javax. Since I am behind a firewall, even if I added the code for the repository, the Android Studio doesn't seem to access it. I went to the maven repository and downloaded all the files that will not resolve. Problem solved and the Gradle sync without error. But I am a certified newbie with only 1 day experience so I do not not if this is the proper way to do it.
Example error: Cannot resolve com:squareup:javawriter:2.1.1
Step 1: I created a path C:\Program Files\Android\Android Studio\gradle\m2repository\com\squareup\javawriter\2.1.1\
Step 2: I downloaded all the jar files from the maven repository: http://repo1.maven.org/maven2/com/squareup/javawriter/2.1.1/
Step 3: I manually downloaded all the .jar files from this directory
Step 4: I copied them to C:\Program Files\Android\Android Studio\gradle\m2repository\com\squareup\javawriter\2.1.1\
I repeated this to all the files that did not resolve including the junit.
For junit, here is the directory I created: C:\Program Files\Android\Android Studio\gradle\m2repository\junit\junit\4.12 and then I copied the junit-4.12.jar inside this directory and the junit error disappeared.
Use the Task manager to find the Service and kill it from there using End Task. Always does the trick for me.
If you have made the service yourself, consider removing Long running operations from the OnStart event, usually that is what causes the Service to be non responsive.
Is Powershell an option?
Start Powershell:
powershell
Create the VPN Connection: Add-VpnConnection
Add-VpnConnection [-Name] <string> [-ServerAddress] <string> [-TunnelType <string> {Pptp | L2tp | Sstp | Ikev2 | Automatic}] [-EncryptionLevel <string> {NoEncryption | Optional | Required | Maximum}] [-AuthenticationMethod <string[]> {Pap | Chap | MSChapv2 | Eap}] [-SplitTunneling] [-AllUserConnection] [-L2tpPsk <string>] [-RememberCredential] [-UseWinlogonCredential] [-EapConfigXmlStream <xml>] [-Force] [-PassThru] [-WhatIf] [-Confirm]
Edit VPN connections: Set-VpnConnection
Set-VpnConnection [-Name] <string> [[-ServerAddress] <string>] [-TunnelType <string> {Pptp | L2tp | Sstp | Ikev2 | Automatic}] [-EncryptionLevel <string> {NoEncryption | Optional | Required | Maximum}] [-AuthenticationMethod <string[]> {Pap | Chap | MSChapv2 | Eap}] [-SplitTunneling <bool>] [-AllUserConnection] [-L2tpPsk <string>] [-RememberCredential <bool>] [-UseWinlogonCredential <bool>] [-EapConfigXmlStream <xml>] [-PassThru] [-Force] [-WhatIf] [-Confirm]
Lookup VPN Connections: Get-VpnConnection
Get-VpnConnection [[-Name] <string[]>] [-AllUserConnection]
Connect: rasdial [connectionName]
rasdial connectionname [username [password | \]] [/domain:domain*] [/phone:phonenumber] [/callback:callbacknumber] [/phonebook:phonebookpath] [/prefixsuffix**]
You can manage your VPN connections with the powershell commands above, and simply use the connection name to connect via rasdial
.
The results of Get-VpnConnection
can be a little verbose. This can be simplified with a simple Select-Object
filter:
Get-VpnConnection | Select-Object -Property Name
More information can be found here:
I'm aware he's not asking for the inline version. But since this question has almost 100k visits and I fell here looking for that, I'll leave it here for the next fellow coder:
Make sure ESLint is not run with the --no-inline-config
flag (if this doesn't sound familiar, you're likely good to go). Then, write this in your code file (for clarity and convention, it's written on top of the file but it'll work anywhere):
/* eslint-env browser */
This tells ESLint that your working environment is a browser, so now it knows what things are available in a browser and adapts accordingly.
There are plenty of environments, and you can declare more than one at the same time, for example, in-line:
/* eslint-env browser, node */
If you are almost always using particular environments, it's best to set it in your ESLint's config file and forget about it.
From their docs:
An environment defines global variables that are predefined. The available environments are:
browser
- browser global variables.node
- Node.js global variables and Node.js scoping.commonjs
- CommonJS global variables and CommonJS scoping (use this for browser-only code that uses Browserify/WebPack).shared-node-browser
- Globals common to both Node and Browser.[...]
Besides environments, you can make it ignore anything you want. If it warns you about using console.log()
but you don't want to be warned about it, just inline:
/* eslint-disable no-console */
You can see the list of all rules, including recommended rules to have for best coding practices.
The solution given by Albert works well as long as the provided function is invoked infrequently and is only used for arrays of modest size, otherwise it is egregiously inefficient. Here is an enhanced vanilla JavaScript solution that works for both Node and browsers and has the following advantages:
• Works efficiently for all octet array sizes
• Generates no intermediate throw-away strings
• Supports 4-byte characters on modern JS engines (otherwise "?" is substituted)
var utf8ArrayToStr = (function () {
var charCache = new Array(128); // Preallocate the cache for the common single byte chars
var charFromCodePt = String.fromCodePoint || String.fromCharCode;
var result = [];
return function (array) {
var codePt, byte1;
var buffLen = array.length;
result.length = 0;
for (var i = 0; i < buffLen;) {
byte1 = array[i++];
if (byte1 <= 0x7F) {
codePt = byte1;
} else if (byte1 <= 0xDF) {
codePt = ((byte1 & 0x1F) << 6) | (array[i++] & 0x3F);
} else if (byte1 <= 0xEF) {
codePt = ((byte1 & 0x0F) << 12) | ((array[i++] & 0x3F) << 6) | (array[i++] & 0x3F);
} else if (String.fromCodePoint) {
codePt = ((byte1 & 0x07) << 18) | ((array[i++] & 0x3F) << 12) | ((array[i++] & 0x3F) << 6) | (array[i++] & 0x3F);
} else {
codePt = 63; // Cannot convert four byte code points, so use "?" instead
i += 3;
}
result.push(charCache[codePt] || (charCache[codePt] = charFromCodePt(codePt)));
}
return result.join('');
};
})();
Use Dictionary<string, DateTime>
to store token with timestamp:
static Dictionary<string, DateTime> dic = new Dictionary<string, DateTime>();
Add token with timestamp whenever you create new token:
dic.Add("yourToken", DateTime.Now);
There is a timer running to remove any expired tokens out of dic:
timer = new Timer(1000*60); //assume run in 1 minute
timer.Elapsed += timer_Elapsed;
static void timer_Elapsed(object sender, ElapsedEventArgs e)
{
var expiredTokens = dic.Where(p => p.Value.AddDays(1) <= DateTime.Now)
.Select(p => p.Key);
foreach (var key in expiredTokens)
dic.Remove(key);
}
So, when you authenticate token, just check whether token exists in dic or not.
The answer for me was to also add this to my build.gradle
file:
configurations.all {
resolutionStrategy.eachDependency { details ->
if (details.requested.group == 'com.android.support'
&& !details.requested.name.contains('multidex') ) {
details.useVersion "26.1.0"
}
}
}
In my case, it was nessisary to enclose the resolution strategy in a configurations.all { .. }
block. I placed the configurations.all
block directly into my app/build.gradle
file (ie configurations.all
was not nested in anything else)
It may be possible that there is no other application running. It is possible that the socket wasn't cleanly shutdown from a previous session in which case you may have to wait for a while before the TIME_WAIT expires on that socket. Unfortunately, you won't be able to use the port till that socket expires. If you can start your server after waiting for a while (a few minutes) then the problem is not due to some other application running on port 8080.
http://www.quadrillian.com/ this enables you to create an entire test suite for your API and run it from your browser and share it with others.
(I'm not allowed to comment yet.) I would suggest the following improvements to the already great answer of James McNellis:
template <typename Enumeration>
constexpr auto as_integer(Enumeration const value)
-> typename std::underlying_type<Enumeration>::type
{
static_assert(std::is_enum<Enumeration>::value, "parameter is not of type enum or enum class");
return static_cast<typename std::underlying_type<Enumeration>::type>(value);
}
with
constexpr
: allowing me to use an enum member value as compile-time array sizestatic_assert
+is_enum
: to 'ensure' compile-time that the function does sth. with enumerations only, as suggestedBy the way I'm asking myself: Why should I ever use enum class
when I would like to assign number values to my enum members?! Considering the conversion effort.
Perhaps I would then go back to ordinary enum
as I suggested here: How to use enums as flags in C++?
Yet another (better) flavor of it without static_assert, based on a suggestion of @TobySpeight:
template <typename Enumeration>
constexpr std::enable_if_t<std::is_enum<Enumeration>::value,
std::underlying_type_t<Enumeration>> as_number(const Enumeration value)
{
return static_cast<std::underlying_type_t<Enumeration>>(value);
}
Character.isDigit(string.charAt(index))
(JavaDoc) will return true if it's a digit
Character.isLetter(string.charAt(index))
(JavaDoc) will return true if it's a letter
#include <cstdio>
#include <windows.h>
#include <tlhelp32.h>
int main( int, char *[] )
{
PROCESSENTRY32 entry;
entry.dwSize = sizeof(PROCESSENTRY32);
HANDLE snapshot = CreateToolhelp32Snapshot(TH32CS_SNAPPROCESS, NULL);
if (Process32First(snapshot, &entry) == TRUE)
{
while (Process32Next(snapshot, &entry) == TRUE)
{
if (stricmp(entry.szExeFile, "target.exe") == 0)
{
HANDLE hProcess = OpenProcess(PROCESS_ALL_ACCESS, FALSE, entry.th32ProcessID);
// Do stuff..
CloseHandle(hProcess);
}
}
}
CloseHandle(snapshot);
return 0;
}
Also, if you'd like to use PROCESS_ALL_ACCESS in OpenProcess, you could try this:
#include <cstdio>
#include <windows.h>
#include <tlhelp32.h>
void EnableDebugPriv()
{
HANDLE hToken;
LUID luid;
TOKEN_PRIVILEGES tkp;
OpenProcessToken(GetCurrentProcess(), TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, &hToken);
LookupPrivilegeValue(NULL, SE_DEBUG_NAME, &luid);
tkp.PrivilegeCount = 1;
tkp.Privileges[0].Luid = luid;
tkp.Privileges[0].Attributes = SE_PRIVILEGE_ENABLED;
AdjustTokenPrivileges(hToken, false, &tkp, sizeof(tkp), NULL, NULL);
CloseHandle(hToken);
}
int main( int, char *[] )
{
EnableDebugPriv();
PROCESSENTRY32 entry;
entry.dwSize = sizeof(PROCESSENTRY32);
HANDLE snapshot = CreateToolhelp32Snapshot(TH32CS_SNAPPROCESS, NULL);
if (Process32First(snapshot, &entry) == TRUE)
{
while (Process32Next(snapshot, &entry) == TRUE)
{
if (stricmp(entry.szExeFile, "target.exe") == 0)
{
HANDLE hProcess = OpenProcess(PROCESS_ALL_ACCESS, FALSE, entry.th32ProcessID);
// Do stuff..
CloseHandle(hProcess);
}
}
}
CloseHandle(snapshot);
return 0;
}
You won't be able to get all types in a namespace, because a namespace can bridge multiple assemblies, but you can get all classes in an assembly and check to see if they belong to that namespace.
Assembly.GetTypes()
works on the local assembly, or you can load an assembly first then call GetTypes()
on it.
varchar: Variable-length, non-Unicode character data. The database collation determines which code page the data is stored using.
nvarchar: Variable-length Unicode character data. Dependent on the database collation for comparisons.
Armed with this knowledge, use whichever one matches your input data (ASCII v. Unicode).
Guys i have was facing this issue for an entire day at my work, just now solved by just copy pasting the MSBuild.exe file in C:\Program Files (x86)\Microsoft Visual Studio\2019\Preview\MSBuild\Current\Bin to C:\Program Files (x86)\Microsoft Visual Studio\2019\Preview\MSBuild\15.0\Bin.
I tried all the suggested methods in this thread none worked. If anyone happened to face this issue straight away use npm install --global --production windows-build-tools --vs2019 or --vs2017 . and copy paste the exe file.
I think this is better for memory usage and performance, and I want to send just the property name when the value is null.
public static String toUrlEncode(Map<String, Object> map) {
StringBuilder sb = new StringBuilder();
map.entrySet().stream()
.forEach(entry
-> (entry.getValue() == null
? sb.append(entry.getKey())
: sb.append(entry.getKey())
.append('=')
.append(URLEncoder.encode(entry.getValue().toString(), StandardCharsets.UTF_8)))
.append('&')
);
sb.delete(sb.length() - 1, sb.length());
return sb.toString();
}
Try
: $(yourcommand)
:
is short for "do nothing".
$()
is just your command.
https://dev.mysql.com/doc/refman/8.0/en/alter-table.html
For MySQL 8
alter table creditReportXml_temp change column applicationID applicantID int(11);
import time
start = time.time()
fun()
# python 2
print 'It took', time.time()-start, 'seconds.'
# python 3
print('It took', time.time()-start, 'seconds.')
Both, FILL_PARENT
and MATCH_PARENT
are the same properties. FILL_PARENT
was deprecated in API level 8.
I recommend using the following, which is taken from http://html5boilerplate.com/
/* >> The Magnificent CLEARFIX << */
.clearfix:after {
content: ".";
display: block;
height: 0;
clear: both;
visibility: hidden;
}
.clearfix {
display: inline-block;
}
* html .clearfix {
height: 1%;
} /* Hides from IE-mac \*/
.clearfix {
display: block;
}
EDIT: As of ~March 2016, Microsoft offers a C/C++ extension for Visual Studio Code and therefor the answer I originally gave is no longer valid.
Visual Studio Code doesn't support C/C++ very well. As such it doesn't >naturally support gcc or gdb within the Visual Studio Code application. The most it will do is syntax highlighting, the advanced features like >intellisense aren't supported with C. You can still compile and debug code >that you wrote in VSC, but you'll need to do that outside the program itself.
A handle is a unique identifier for an object managed by Windows. It's like a pointer, but not a pointer in the sence that it's not an address that could be dereferenced by user code to gain access to some data. Instead a handle is to be passed to a set of functions that can perform actions on the object the handle identifies.
I was running into this issue that when I run docker rm
(which usually works) I would get:
Error: No such image
The easiest solution to this is removing all stopped containers by running:
docker container prune
I had a same problem and I fix it with the following steps:
important:
after any changes or new settings you must restart SQLSERVER
service. run services.msc
on Windows
If you are using Android Studio 3.0 or above make sure your project build.gradle should have content similar to-
buildscript {
repositories {
google()
jcenter()
}
dependencies {
classpath 'com.android.tools.build:gradle:3.0.1'
}
}
allprojects {
repositories {
google()
jcenter()
}
}
Note- position really matters add google() before jcenter()
And for below Android Studio 3.0 and starting from support libraries 26.+ your project build.gradle must look like this-
allprojects {
repositories {
jcenter()
maven {
url "https://maven.google.com"
}
}
}
check these links below for more details-
You need other headers, not only access-control-allow-origin. If your request have the "Access-Control-Allow-Origin" header, you must copy it into the response headers, If doesn't, you must check the "Origin" header and copy it into the response. If your request doesn't have Access-Control-Allow-Origin not Origin headers, you must return "*".
You can read the complete explanation here: http://www.html5rocks.com/en/tutorials/cors/#toc-adding-cors-support-to-the-server
and this is the function I'm using to write cross domain headers:
func writeCrossDomainHeaders(w http.ResponseWriter, req *http.Request) {
// Cross domain headers
if acrh, ok := req.Header["Access-Control-Request-Headers"]; ok {
w.Header().Set("Access-Control-Allow-Headers", acrh[0])
}
w.Header().Set("Access-Control-Allow-Credentials", "True")
if acao, ok := req.Header["Access-Control-Allow-Origin"]; ok {
w.Header().Set("Access-Control-Allow-Origin", acao[0])
} else {
if _, oko := req.Header["Origin"]; oko {
w.Header().Set("Access-Control-Allow-Origin", req.Header["Origin"][0])
} else {
w.Header().Set("Access-Control-Allow-Origin", "*")
}
}
w.Header().Set("Access-Control-Allow-Methods", "GET, POST, PUT, DELETE")
w.Header().Set("Connection", "Close")
}
There are some very good answers here. I'd like to add the following here as well:
some_dict = {
"foo": "bar",
"lorem": "ipsum"
}
for index, (key, value) in enumerate(some_dict.items()):
print(index, key, value)
results in
0 foo bar
1 lorem ipsum
Appears to work with Python 2.7
and 3.5
If we think about today, accepted answer is too old. As we know that we have many new libraries which can help you to make this types of application.
You should learn following topics that will helps you surely:
SyncAdapter: The sync adapter component in your app encapsulates the code for the tasks that transfer data between the device and a server. Based on the scheduling and triggers you provide in your app, the sync adapter framework runs the code in the sync adapter component.
Realm: Realm is a mobile database: a replacement for SQLite & Core Data.
Retrofit Type-safe HTTP client for Android and Java by Square, Inc. Must Learn a-smart-way-to-use-retrofit
And your sync logic for database like: How to sync SQLite database on Android phone with MySQL database on server?
Best Luck to all new learner. :)
If you are using IIS Express and VS 2017:
Go to the Web Application Properties > Web Tab > Servers Section > And change the Bitness to x64.
Quickly : you can do :
// Fixed-size list
List list = Arrays.asList(array);
// Growable list
list = new LinkedList(Arrays.asList(array));
// Duplicate elements are discarded
Set set = new HashSet(Arrays.asList(array));
and to reverse
// Create an array containing the elements in a list
Object[] objectArray = list.toArray();
MyClass[] array = (MyClass[])list.toArray(new MyClass[list.size()]);
// Create an array containing the elements in a set
objectArray = set.toArray();
array = (MyClass[])set.toArray(new MyClass[set.size()]);
npm list -g --depth=0
-g
option it only shows the current directory’s packages)Maybe this help you. May this not covert many to many relantionship, but es pretty handy when you want to send your model in json format.
def serial_model(modelobj):
opts = modelobj._meta.fields
modeldict = model_to_dict(modelobj)
for m in opts:
if m.is_relation:
foreignkey = getattr(modelobj, m.name)
if foreignkey:
try:
modeldict[m.name] = serial_model(foreignkey)
except:
pass
return modeldict
I know your question is tagged as boostrap-modal
(althought you didn't mentioned Bootstrap explicity neither), but I loved to see the simple way W3.CSS solved this and I think is good to share it.
<img src="/myImage.png" style="width:30%;cursor:zoom-in"
onclick="document.getElementById('modal01').style.display='block'">
<div id="modal01" class="w3-modal" onclick="this.style.display='none'">
<div class="w3-modal-content w3-animate-zoom">
<img src="/myImage.png" style="width:100%">
</div>
</div>
I let you a link to the W3School modal image example to see the headers to make W3.CSS work.
Thanks to @EdChum I was struggling with same problem especially when indexes do not match. Unfortunatly in pandas guide this case is missed (when you for example delete some rows)
import pandas as pd
t=pd.DataFrame()
t['a']=[1,2,3,4]
t=t.loc[t['a']>1] #now index starts from 1
u=pd.DataFrame()
u['b']=[1,2,3] #index starts from 0
#option 1
#keep index of t
u.index = t.index
#option 2
#index of t starts from 0
t.reset_index(drop=True, inplace=True)
#now concat will keep number of rows
r=pd.concat([t,u], axis=1)
If you use the string literal exactly as you have shown us, the problem is the ;
character at the end. You may not include that in the query string in the JDBC calls.
As you are inserting only a single row, a regular INSERT
should be just fine even when inserting multiple rows. Using a batched statement is probable more efficient anywy. No need for INSERT ALL
. Additionally you don't need the temporary clob and all that. You can simplify your method to something like this (assuming I got the parameters right):
String query1 = "select substr(to_char(max_data),1,4) as year, " +
"substr(to_char(max_data),5,6) as month, max_data " +
"from dss_fin_user.acq_dashboard_src_load_success " +
"where source = 'CHQ PeopleSoft FS'";
String query2 = ".....";
String sql = "insert into domo_queries (clob_column) values (?)";
PreparedStatement pstmt = con.prepareStatement(sql);
StringReader reader = new StringReader(query1);
pstmt.setCharacterStream(1, reader, query1.length());
pstmt.addBatch();
reader = new StringReader(query2);
pstmt.setCharacterStream(1, reader, query2.length());
pstmt.addBatch();
pstmt.executeBatch();
con.commit();
Take a look at this post: http://praveenbattula.blogspot.com/2009/09/access-iframe-content-using-jquery.html
$("#iframeID").contents().find("[tokenid=" + token + "]").html();
Place your selector in the find method.
This may not be possible however if the iframe is not coming from your server. Other posts talk about permission denied errors.
I come with this to change video source dynamically. "canplay" event sometime doesn't fire in Firefox so i have added "loadedmetadata". Also i pause previous video if there is one...
var loadVideo = function(movieUrl) {
console.log('loadVideo()');
$videoLoading.show();
var isReady = function (event) {
console.log('video.isReady(event)', event.type);
video.removeEventListener('canplay', isReady);
video.removeEventListener('loadedmetadata', isReady);
$videoLoading.hide();
video.currentTime = 0;
video.play();
},
whenPaused = function() {
console.log('video.whenPaused()');
video.removeEventListener('pause', whenPaused);
video.addEventListener('canplay', isReady, false);
video.addEventListener('loadedmetadata', isReady, false); // Sometimes Firefox don't trigger "canplay" event...
video.src = movieUrl; // Change actual source
};
if (video.src && !video.paused) {
video.addEventListener('pause', whenPaused, false);
video.pause();
}
else whenPaused();
};
You could configure compiling sources using different JDK with maven-compiler-plugin
.
Just specify path to javac
in <executable>
tag. E.g for java11 it looks like:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.8.0</version>
<configuration>
<source>11</source>
<target>11</target>
<fork>true</fork>
<executable>C:\Program Files\Java\jdk-11.0.1\bin\javac</executable> <!--PATH TO JAVAC -->
</configuration>
</plugin>
sometimes this message shown when you are calling a wrong api
check your api endpoint
What worked for me after following all your workarounds was to call the API:
<script async defer src="https://maps.googleapis.com/maps/api/js?key=you_API_KEY&callback=initMap&libraries=places"
type="text/javascript"></script>
before my : <div id="map"></div>
I am using .ASP NET (MVC)
Most of the answers provided here address the number of incoming requests to your backend webservice, not the number of outgoing requests you can make from your ASP.net application to your backend service.
It's not your backend webservice that is throttling your request rate here, it is the number of open connections your calling application is willing to establish to the same endpoint (same URL).
You can remove this limitation by adding the following configuration section to your machine.config file:
<configuration>
<system.net>
<connectionManagement>
<add address="*" maxconnection="65535"/>
</connectionManagement>
</system.net>
</configuration>
You could of course pick a more reasonable number if you'd like such as 50 or 100 concurrent connections. But the above will open it right up to max. You can also specify a specific address for the open limit rule above rather than the '*' which indicates all addresses.
MSDN Documentation for System.Net.connectionManagement
Another Great Resource for understanding ConnectManagement in .NET
Hope this solves your problem!
EDIT: Oops, I do see you have the connection management mentioned in your code above. I will leave my above info as it is relevant for future enquirers with the same problem. However, please note there are currently 4 different machine.config files on most up to date servers!
There is .NET Framework v2 running under both 32-bit and 64-bit as well as .NET Framework v4 also running under both 32-bit and 64-bit. Depending on your chosen settings for your application pool you could be using any one of these 4 different machine.config files! Please check all 4 machine.config files typically located here:
Check your URL's protocol.
You will also see this error if you host an encrypted page (https) and open it as plain text (http) in Firefox.
Go to properties of your project ( with Alt+Enter or righ-click )
check on Apache Tomcat v7.0 under Targeted Runtime and it works.
Try this example.
activity_main.xml:
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:tools="http://schemas.android.com/tools"
android:layout_width="match_parent"
android:layout_height="match_parent"
tools:context=".MainActivity" >
<GridView
android:numColumns="auto_fit"
android:gravity="center"
android:columnWidth="100dp"
android:stretchMode="columnWidth"
android:layout_width="fill_parent"
android:layout_height="fill_parent"
android:id="@+id/grid"
android:background="#fff7ff"
/>
</LinearLayout>
grid_single.xml:
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:tools="http://schemas.android.com/tools"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:padding="5dp" >
<ImageView
android:id="@+id/grid_image"
android:layout_width="60dp"
android:layout_height="60dp"
>
</ImageView>
<TextView
android:id="@+id/grid_text"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:layout_marginTop="15dp"
android:textSize="9sp"
android:textColor="#3a0fff">
</TextView>
</LinearLayout>
CustomGrid.java:
package com.example.lalit.gridtest;
import android.content.Context;
import android.view.LayoutInflater;
import android.view.View;
import android.view.ViewGroup;
import android.widget.BaseAdapter;
import android.widget.ImageView;
import android.widget.TextView;
public class CustomGrid extends BaseAdapter {
private Context mContext;
private final String[] web;
private final int[] Imageid;
public CustomGrid(Context c, String[] web, int[] Imageid) {
mContext = c;
this.Imageid = Imageid;
this.web = web;
}
@Override
public int getCount() {
// TODO Auto-generated method stub
return web.length;
}
@Override
public Object getItem(int position) {
// TODO Auto-generated method stub
return null;
}
@Override
public long getItemId(int position) {
// TODO Auto-generated method stub
return 0;
}
@Override
public View getView(int position, View convertView, ViewGroup parent) {
// TODO Auto-generated method stub
View grid;
LayoutInflater inflater = (LayoutInflater) mContext
.getSystemService(Context.LAYOUT_INFLATER_SERVICE);
if (convertView == null) {
grid = new View(mContext);
grid = inflater.inflate(R.layout.grid_single, null);
TextView textView = (TextView) grid.findViewById(R.id.grid_text);
ImageView imageView = (ImageView) grid.findViewById(R.id.grid_image);
textView.setText(web[position]);
imageView.setImageResource(Imageid[position]);
} else {
grid = (View) convertView;
}
return grid;
}
}
MainActivity.java:
package com.example.lalit.gridtest;
import android.content.Intent;
import android.net.Uri;
import android.os.Bundle;
import android.app.Activity;
import android.view.View;
import android.widget.AdapterView;
import android.widget.GridView;
import android.widget.ImageView;
import android.widget.Toast;
public class MainActivity extends Activity {
GridView grid;
String[] web = {
"Mom",
"Mahendra",
"Narayan",
"Bhai",
"Deepak",
"Sanjay",
"Navdeep",
"Lovesh",
};
int[] imageId = {
R.drawable.ic_launcher,
R.drawable.ic_launcher,
R.drawable.ic_launcher,
R.drawable.ic_launcher,
R.drawable.ic_launcher,
R.drawable.ic_launcher,
R.drawable.ic_launcher,
R.drawable.ic_launcher,
R.drawable.ic_launcher,
R.drawable.ic_launcher,
R.drawable.ic_launcher,
R.drawable.ic_launcher,
R.drawable.ic_launcher,
R.drawable.ic_launcher,
R.drawable.ic_launcher
};
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_main);
final CustomGrid adapter = new CustomGrid(MainActivity.this, web, imageId);
grid = (GridView) findViewById(R.id.grid);
grid.setAdapter(adapter);
grid.setOnItemClickListener(new AdapterView.OnItemClickListener() {
@Override
public void onItemClick(AdapterView<?> parent, View view,
int position, long id){
if (web[position].toString().equals("Mom")) {
try {
String uri ="te:"+ "**********";
Intent callIntent = new Intent(Intent.ACTION_CALL, Uri.parse(uri));
startActivity(callIntent);
} catch (Exception e) {
Toast.makeText(getApplicationContext(), "Your call has failed...",
Toast.LENGTH_LONG).show();
e.printStackTrace();
}
}
if (web[position].toString().equals("Mahendra")) {
try {
String uri = "tel:" + "**********";
Intent callIntent = new Intent(Intent.ACTION_CALL, Uri.parse(uri));
startActivity(callIntent);
} catch (Exception e) {
Toast.makeText(getApplicationContext(), "Your call has failed...",
Toast.LENGTH_LONG).show();
e.printStackTrace();
}
}
if(web[position].toString().equals("Narayan")){
try {
String uri = "tel:" + "**********";
Intent callIntent = new Intent(Intent.ACTION_CALL, Uri.parse(uri));
startActivity(callIntent);
} catch (Exception e) {
Toast.makeText(getApplicationContext(), "Your call has failed...",
Toast.LENGTH_LONG).show();
e.printStackTrace();
}
}
if(web[position].toString().equals("Bhai")){
try {
String uri = "tel:" + "**********";
Intent callIntent = new Intent(Intent.ACTION_CALL, Uri.parse(uri));
startActivity(callIntent);
} catch (Exception e) {
Toast.makeText(getApplicationContext(), "Your call has failed...",
Toast.LENGTH_LONG).show();
e.printStackTrace();
}
}
if(web[position].toString().equals("Deepak")){
try {
String uri = "tel:" + "**********";
Intent callIntent = new Intent(Intent.ACTION_CALL, Uri.parse(uri));
startActivity(callIntent);
} catch (Exception e) {
Toast.makeText(getApplicationContext(), "Your call has failed...",
Toast.LENGTH_LONG).show();
e.printStackTrace();
}
}
if(web[position].toString().equals("Sanjay")){
try {
String uri = "tel:" + "**********";
Intent callIntent = new Intent(Intent.ACTION_CALL, Uri.parse(uri));
startActivity(callIntent);
} catch (Exception e) {
Toast.makeText(getApplicationContext(), "Your call has failed...",
Toast.LENGTH_LONG).show();
e.printStackTrace();
}
}
if(web[position].toString().equals("Navdeep")){
try {
String uri = "tel:" + "**********";
Intent callIntent = new Intent(Intent.ACTION_CALL, Uri.parse(uri));
startActivity(callIntent);
} catch (Exception e) {
Toast.makeText(getApplicationContext(), "Your call has failed...",
Toast.LENGTH_LONG).show();
e.printStackTrace();
}
}
if(web[position].toString().equals("Lovesh")){
try {
String uri = "tel:" + "**********";
Intent callIntent = new Intent(Intent.ACTION_CALL, Uri.parse(uri));
startActivity(callIntent);
} catch (Exception e) {
Toast.makeText(getApplicationContext(), "Your call has failed...",
Toast.LENGTH_LONG).show();
e.printStackTrace();
}
}
}
});
}
}
AndroidManifest.xml:
<?xml version="1.0" encoding="utf-8"?>
<manifest xmlns:android="http://schemas.android.com/apk/res/android"
package="com.example.lalit.gridtest" >
<uses-permission android:name="android.permission.CALL_PHONE" />
<application
android:allowBackup="true"
android:icon="@drawable/ic_launcher"
android:label="@string/app_name"
android:theme="@style/AppTheme" >
<activity
android:name=".MainActivity"
android:label="@string/app_name" >
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.LAUNCHER" />
</intent-filter>
</activity>
</application>
</manifest>
Full code for anyone who needs it:
String readTimestamp(int timestamp) {
var now = DateTime.now();
var format = DateFormat('HH:mm a');
var date = DateTime.fromMillisecondsSinceEpoch(timestamp * 1000);
var diff = now.difference(date);
var time = '';
if (diff.inSeconds <= 0 || diff.inSeconds > 0 && diff.inMinutes == 0 || diff.inMinutes > 0 && diff.inHours == 0 || diff.inHours > 0 && diff.inDays == 0) {
time = format.format(date);
} else if (diff.inDays > 0 && diff.inDays < 7) {
if (diff.inDays == 1) {
time = diff.inDays.toString() + ' DAY AGO';
} else {
time = diff.inDays.toString() + ' DAYS AGO';
}
} else {
if (diff.inDays == 7) {
time = (diff.inDays / 7).floor().toString() + ' WEEK AGO';
} else {
time = (diff.inDays / 7).floor().toString() + ' WEEKS AGO';
}
}
return time;
}
Thank you Alex Haslam for the help!
CSS is a nicely designed paradigm, and many of it's features are not much used.
If by a condition and variable you mean a mechanism to distribute a change of some value to the whole document, or under a scope of some element, then this is how to do it:
var myVar = 4;_x000D_
document.body.className = (myVar == 5 ? "active" : "normal");
_x000D_
body.active .menuItem {_x000D_
background-position : 150px 8px;_x000D_
background-color: black;_x000D_
}_x000D_
body.normal .menuItem {_x000D_
background-position : 4px 8px; _x000D_
background-color: green;_x000D_
}
_x000D_
<body>_x000D_
<div class="menuItem"></div>_x000D_
</body>
_x000D_
This way, you distribute the impact of the variable throughout the CSS styles. This is similar to what @amichai and @SeReGa propose, but more versatile.
Another such trick is to distribute the ID of some active item throughout the document, e.g. again when highlighting a menu: (Freemarker syntax used)
var chosenCategory = 15;_x000D_
document.body.className = "category" + chosenCategory;
_x000D_
<#list categories as cat >_x000D_
body.category${cat.id} .menuItem { font-weight: bold; }_x000D_
</#list>
_x000D_
<body>_x000D_
<div class="menuItem"></div>_x000D_
</body>
_x000D_
Sure,this is only practical with a limited set of items, like categories or states, and not unlimited sets like e-shop goods, otherwise the generated CSS would be too big. But it is especially convenient when generating static offline documents.
One more trick to do "conditions" with CSS in combination with the generating platform is this:
.myList {_x000D_
/* Default list formatting */_x000D_
}_x000D_
.myList.count0 {_x000D_
/* Hide the list when there is no item. */_x000D_
display: none;_x000D_
}_x000D_
.myList.count1 {_x000D_
/* Special treatment if there is just 1 item */_x000D_
color: gray;_x000D_
}
_x000D_
<ul class="myList count${items.size()}">_x000D_
<!-- Iterate list's items here -->_x000D_
<li>Something...</div>_x000D_
</ul>
_x000D_
Convert the string into char array with all the letters in lower case:
char c[] = str.toLowerCase().toCharArray();
Then you can use Character.isLetterOrDigit(c[index])
to find out which index has special characters.
Just Modified the previous example to print even collection containing user defined objects.
public class ToStringHelper {
private static String separator = "\n";
public ToStringHelper(String seperator) {
super();
ToStringHelper.separator = seperator;
}
public static String toString(List<?> l) {
StringBuilder sb = new StringBuilder();
String sep = "";
for (Object object : l) {
String v = ToStringBuilder.reflectionToString(object);
int start = v.indexOf("[");
int end = v.indexOf("]");
String st = v.substring(start,end+1);
sb.append(sep).append(st);
sep = separator;
}
return sb.toString();
}
public static String toString(Map<?,?> m) {
StringBuilder sb = new StringBuilder();
String sep = "";
for (Object object : m.keySet()) {
String v = ToStringBuilder.reflectionToString(m.get(object));
int start = v.indexOf("[");
int end = v.indexOf("]");
String st = v.substring(start,end+1);
sb.append(sep).append(st);
sep = separator;
}
return sb.toString();
}
public static String toString(Set<?> s) {
StringBuilder sb = new StringBuilder();
String sep = "";
for (Object object : s) {
String v = ToStringBuilder.reflectionToString(object);
int start = v.indexOf("[");
int end = v.indexOf("]");
String st = v.substring(start,end+1);
sb.append(sep).append(st);
sep = separator;
}
return sb.toString();
}
public static void print(List<?> l) {
System.out.println(toString(l));
}
public static void print(Map<?,?> m) {
System.out.println(toString(m));
}
public static void print(Set<?> s) {
System.out.println(toString(s));
}
}
One of the reasons for static vs. normal have to do with classloading. You cannot instantiate an inner class in the constructor of it's parent.
PS: I've always understood 'nested' and 'inner' to be interchangeable. There may be subtle nuances in the terms but most Java developers would understand either.
System.Uri.EscapeUriString() didn't seem to do anything, but System.Uri.EscapeDataString() worked for me.
I write a code in jquery. It isnt seen an easy way. But i hope it is useful for you.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<style type="text/css">
.popup{
border: 4px solid #6b6a63;
width: 800px;
border-radius :7px;
margin : auto;
padding : 20px;
position:fixed;
}
</style>
<div id="popup" class="popup">
some lengthy text<br>
some lengthy text<br>
some lengthy text<br>
some lengthy text<br>
some lengthy text<br>
some lengthy text<br>
some lengthy text<br>
some lengthy text<br>
</div>
<script type="text/javascript" src="http://code.jquery.com/jquery-1.7.1.min.js"></script>
<script>
$(document).ready(function(){
var popup_height = document.getElementById('popup').offsetHeight;
var popup_width = document.getElementById('popup').offsetWidth;
$(".popup").css('top',(($(window).height()-popup_height)/2));
$(".popup").css('left',(($(window).width()-popup_width)/2));
});
</script>
Alternate solution to doing shallow clone (git clone --depth=1 <URL>
) would be, if remote side supports it, to use --remote
option of git archive:
$ git archive --format=tar --remote=<repository URL> HEAD | tar xf -
Or, if remote repository in question is browse-able using some web interface like gitweb or GitHub, then there is a chance that it has 'snapshot' feature, and you can download latest version (without versioning information) from web interface.
As a good practice you can use an Ant Script (Eclipse comes with it) to generate your JAR file. Inside this JAR you can have all dependent libs.
You can even set the MANIFEST's Class-path header to point to files in your filesystem, it's not a good practice though.
Ant build.xml script example:
<project name="jar with libs" default="compile and build" basedir=".">
<!-- this is used at compile time -->
<path id="example-classpath">
<pathelement location="${root-dir}" />
<fileset dir="D:/LIC/xalan-j_2_7_1" includes="*.jar" />
</path>
<target name="compile and build">
<!-- deletes previously created jar -->
<delete file="test.jar" />
<!-- compile your code and drop .class into "bin" directory -->
<javac srcdir="${basedir}" destdir="bin" debug="true" deprecation="on">
<!-- this is telling the compiler where are the dependencies -->
<classpath refid="example-classpath" />
</javac>
<!-- copy the JARs that you need to "bin" directory -->
<copy todir="bin">
<fileset dir="D:/LIC/xalan-j_2_7_1" includes="*.jar" />
</copy>
<!-- creates your jar with the contents inside "bin" (now with your .class and .jar dependencies) -->
<jar destfile="test.jar" basedir="bin" duplicate="preserve">
<manifest>
<!-- Who is building this jar? -->
<attribute name="Built-By" value="${user.name}" />
<!-- Information about the program itself -->
<attribute name="Implementation-Vendor" value="ACME inc." />
<attribute name="Implementation-Title" value="GreatProduct" />
<attribute name="Implementation-Version" value="1.0.0beta2" />
<!-- this tells which class should run when executing your jar -->
<attribute name="Main-class" value="ApplyXPath" />
</manifest>
</jar>
</target>
On Linux the command is whereis. Alternatively you can issue find / -name git
and wait for an eternity. Alternatively try echo $PATH | sed "s/:/ /g" | xargs -L 1 ls | grep git
View this web: http://www.w3resource.com/sql/subqueries/multiplee-row-column-subqueries.php
Use example
select ord_num, agent_code, ord_date, ord_amount
from orders
where(agent_code, ord_amount) IN
(SELECT agent_code, MIN(ord_amount)
FROM orders
GROUP BY agent_code);
There was a relevant answer from Ask Tom published in April 2016.
If you have sufficient server power, you can do
select /*+ parallel */ count(*) from sometable
If you are just after an approximation, you can do :
select 5 * count(*) from sometable sample block (10);
Also, if there is
- a column that contains no nulls, but is not defined as NOT NULL, and
- there is an index on that column
you could try:
select /*+ index_ffs(t) */ count(*) from sometable t where indexed_col is not null
Using UIScrollView's setContentOffset:animated:
function to scroll to the bottom in Swift.
let bottomOffset : CGPoint = CGPointMake(0, scrollView.contentSize.height - scrollView.bounds.size.height + scrollView.contentInset.bottom)
scrollView.setContentOffset(bottomOffset, animated: true)
Goto Search->File
You will get an window, you can give either simple search text or regx pattern. Once you enter your search keyword click Search and make sure that Scope is Workspace.
You may use this for Replace as well.
You can try the following method(python3.6.2):
case one:
@app.route('/hello')
def hello():
headers={ 'content-type':'text/plain' ,'location':'http://www.stackoverflow'}
response = make_response('<h1>hello world</h1>',301)
response.headers = headers
return response
case two:
@app.route('/hello')
def hello():
headers={ 'content-type':'text/plain' ,'location':'http://www.stackoverflow.com'}
return '<h1>hello world</h1>',301,headers
I am using Flask .And if you want to return json,you can write this:
import json #
@app.route('/search/<keyword>')
def search(keyword):
result = Book.search_by_keyword(keyword)
return json.dumps(result),200,{'content-type':'application/json'}
from flask import jsonify
@app.route('/search/<keyword>')
def search(keyword):
result = Book.search_by_keyword(keyword)
return jsonify(result)
There is a rule in Python programming called "it is Easier to Ask for Forgiveness than for Permission" (in short: EAFP). It means that you should catch exceptions instead of checking values for validity.
Thus, try the following:
try:
qByUser = byUsrUrlObj.read()
qUserData = json.loads(qByUser).decode('utf-8')
questionSubjs = qUserData["all"]["questions"]
except ValueError: # includes simplejson.decoder.JSONDecodeError
print 'Decoding JSON has failed'
EDIT: Since simplejson.decoder.JSONDecodeError
actually inherits from ValueError
(proof here), I simplified the catch statement by just using ValueError
.
Staring with Xcode 9, the beta Xcode is labeled 'Xcode-beta.app' and is designed to live side by side with the production version. Info can be found in the Xcode release notes here. (Not using direct link because it breaks often).
From Apple:
Xcode 9 beta 4 can coexist with previous versions of Xcode. Prerelease versions of Xcode are made available from developer.apple.com, packaged in a compressed XIP file. To install Xcode during the beta period, download the XIP file, double-click the file to expand it in place, then drag Xcode-beta.app to the Applications folder
Just a supplement to the first post: use a user defined union type to store the pthread_t:
union tid {
pthread_t pthread_id;
unsigned long converted_id;
};
Whenever you want to print pthread_t
, create a tid
and assign tid.pthread_id = ...
, then print tid.converted_id
.
You can use robocopy to copy files with an archive flag and reset the attribute. Use /M command line, this is my backup script with few extra tricks.
This script needs NirCmd tool to keep mouse moving so that my machine won't fall into sleep. Script is using a lockfile to tell when backup script is completed and mousemove.bat script is closed. You may leave this part out.
Another is 7-Zip tool for splitting virtualbox files smaller than 4GB files, my destination folder is still FAT32 so this is mandatory. I should use NTFS disk but haven't converted backup disks yet.
backup-robocopy.bat
@REM https://technet.microsoft.com/en-us/library/cc733145.aspx
@REM http://www.skonet.com/articles_archive/robocopy_job_template.aspx
set basedir=%~dp0
del /Q %basedir%backup-robocopy-log.txt
set dt=%date%_%time:~0,8%
echo "%dt% robocopy started" > %basedir%backup-robocopy-lock.txt
start "Keep system awake" /MIN /LOW cmd.exe /C %basedir%backup-robocopy-movemouse.bat
set dest=E:\backup
call :BACKUP "Program Files\MariaDB 5.5\data"
call :BACKUP "projects"
call :BACKUP "Users\Myname"
:SPLIT
@REM Split +4GB file to multiple files to support FAT32 destination disk,
@REM splitted files must be stored outside of the robocopy destination folder.
set srcfile=C:\Users\Myname\VirtualBox VMs\Ubuntu\Ubuntu.vdi
set dstfile=%dest%\Users\Myname\VirtualBox VMs\Ubuntu\Ubuntu.vdi
set dstfile2=%dest%\non-robocopy\Users\Myname\VirtualBox VMs\Ubuntu\Ubuntu.vdi
IF NOT EXIST "%dstfile%" (
IF NOT EXIST "%dstfile2%.7z.001" attrib +A "%srcfile%"
dir /b /aa "%srcfile%" && (
del /Q "%dstfile2%.7z.*"
c:\apps\commands\7za.exe -mx0 -v4000m u "%dstfile2%.7z" "%srcfile%"
attrib -A "%srcfile%"
@set dt=%date%_%time:~0,8%
@echo %dt% Splitted %srcfile% >> %basedir%backup-robocopy-log.txt
)
)
del /Q %basedir%backup-robocopy-lock.txt
GOTO :END
:BACKUP
TITLE Backup %~1
robocopy.exe "c:\%~1" "%dest%\%~1" /JOB:%basedir%backup-robocopy-job.rcj
GOTO :EOF
:END
@set dt=%date%_%time:~0,8%
@echo %dt% robocopy completed >> %basedir%backup-robocopy-log.txt
@echo %dt% robocopy completed
@pause
backup-robocopy-job.rcj
:: Robocopy Job Parameters
:: robocopy.exe "c:\projects" "E:\backup\projects" /JOB:backup-robocopy-job.rcj
:: Source Directory (this is given in command line)
::/SD:c:\examplefolder
:: Destination Directory (this is given in command line)
::/DD:E:\backup\examplefolder
:: Include files matching these names
/IF
*.*
/M :: copy only files with the Archive attribute and reset it.
/XJD :: eXclude Junction points for Directories.
:: Exclude Directories
/XD
C:\projects\bak
C:\projects\old
C:\project\tomcat\logs
C:\project\tomcat\work
C:\Users\Myname\.eclipse
C:\Users\Myname\.m2
C:\Users\Myname\.thumbnails
C:\Users\Myname\AppData
C:\Users\Myname\Favorites
C:\Users\Myname\Links
C:\Users\Myname\Saved Games
C:\Users\Myname\Searches
:: Exclude files matching these names
/XF
C:\Users\Myname\ntuser.dat
*.~bpl
:: Exclude files with any of the given Attributes set
:: S=System, H=Hidden
/XA:SH
:: Copy options
/S :: copy Subdirectories, but not empty ones.
/E :: copy subdirectories, including Empty ones.
/COPY:DAT :: what to COPY for files (default is /COPY:DAT).
/DCOPY:T :: COPY Directory Timestamps.
/PURGE :: delete dest files/dirs that no longer exist in source.
:: Retry Options
/R:0 :: number of Retries on failed copies: default 1 million.
/W:1 :: Wait time between retries: default is 30 seconds.
:: Logging Options (LOG+ append)
/NDL :: No Directory List - don't log directory names.
/NP :: No Progress - don't display percentage copied.
/TEE :: output to console window, as well as the log file.
/LOG+:c:\apps\commands\backup-robocopy-log.txt :: append to logfile
backup-robocopy-movemouse.bat
@echo off
@REM Move mouse to prevent maching from sleeping
@rem while running a backup script
echo Keep system awake while robocopy is running,
echo this script moves a mouse once in a while.
set basedir=%~dp0
set IDX=0
:LOOP
IF NOT EXIST "%basedir%backup-robocopy-lock.txt" GOTO :EOF
SET /A IDX=%IDX% + 1
IF "%IDX%"=="240" (
SET IDX=0
echo Move mouse to keep system awake
c:\apps\commands\nircmdc.exe sendmouse move 5 5
c:\apps\commands\nircmdc.exe sendmouse move -5 -5
)
c:\apps\commands\nircmdc.exe wait 1000
GOTO :LOOP
In case you need to simulate network connection quality when developing for Windows Phone, you might give a try to a Visual Studio built-in tool called Simulation Dashboard (more details here http://msdn.microsoft.com/en-us/library/windowsphone/develop/jj206952(v=vs.105).aspx):
You can use the Simulation Dashboard in Visual Studio to test your app for these connection problems, and to help prevent users from encountering scenarios like the following:
- High-resolution music or videos stutter or freeze while streaming, or take a long time to download over a low-bandwidth connection.
- Calls to a web service fail with a timeout.
- The app crashes when no network is available.
- Data transfer does not resume when the network connection is lost and then restored.
- The user’s battery is drained by a streaming app that uses the network inefficiently.
- Mapping the user’s route is interrupted in a navigation app.
...
In Visual Studio, on the Tools menu, open Simulation Dashboard. Find the network simulation section of the dashboard and check the Enable Network Simulation check box.
Take a look at node-busmq - it's a production grade, highly available and scalable message bus backed by redis.
I wrote this module for our global cloud and it's currently deployed in our production environment in several datacenters around the world. It supports named queues, peer-to-peer communication, guaranteed delivery and federation.
For more information on why we created this module you can read this blog post: All Aboard The Message Bus
In my case the issue was there was some process that had locked my keychain access...
Force quit all other apps to make sure keychain access is not locked on your Mac
Rows("2:2").Select
ActiveWindow.FreezePanes = True
Select a different range for a different effect, much the same way you would do manually. The "Freeze Top Row" really just is a shortcut new in Excel 2007 (and up), it contains no added functionality compared to earlier versions of Excel.
You can use JQuery to ensure that all elements of the documents are ready before it starts the client side scripting
$(document).ready(
function()
{
document.getElementById(elmId).innerHTML = value;
}
);
SELECT column_name FROM table_name WHERE column_name IN (NULL, '')
It seems only your DAO are using session. Thus a new session is open then close for each call to a DAO method. Thus the execution of the program can be resumed as:
// open a session, get the number of entity and close the session
int startingCount = sfdao.count();
// open a session, create a new entity and close the session
sfdao.create( sf );
// open a session, read an entity and close the session
SecurityFiling sf2 = sfdao.read( sf.getId() );
// open a session, delete an entity and close the session
sfdao.delete( sf );
etc...
By default, collection and association in an entity are lazy: they are loaded from the database on demand. Thus:
sf.getSfSubmissionType().equals( sf2.getSfSubmissionType() )
is throwing an exception because it request a new loading from the database, and the session associated with the loading of the entity has already been closed.
There is two approaches to resolve this problem:
create a session to enclosed all our code. Thus it would mean changing your DAO content to avoid opening a second session
create a session then update (i.e. reconnect) your entity to this session before the assertions.
session.update(object);
I did not find any of the answers satisfactory. All the mentioned libraries have some problem or the other like Cairo dropping support for python 3.6 (they dropped Python 2 support some 3 years ago!). Also, installing the mentioned libraries on the Mac was a pain.
Finally, I found the best solution was svglib + reportlab. Both installed without a hitch using pip and first call to convert from svg to png worked beautifully! Very happy with the solution.
Just 2 commands do the trick:
from svglib.svglib import svg2rlg
from reportlab.graphics import renderPM
drawing = svg2rlg("my.svg")
renderPM.drawToFile(drawing, "my.png", fmt="PNG")
Are there any limitations with these I should be aware of?
Here's a way I've used in the past. Please note that you have to add a reference to the Microsoft Scripting Runtime so you can use the Dictionary object - if you don't want to add that reference you can do this with Collections but they're slower and there's no elegant way to check .Exists (you have to trap the error).
Dim OldVals As New Dictionary
Private Sub Worksheet_Change(ByVal Target As Range)
Dim cell As Range
For Each cell In Target
If OldVals.Exists(cell.Address) Then
Debug.Print "New value of " & cell.Address & " is " & cell.Value & "; old value was " & OldVals(cell.Address)
Else
Debug.Print "No old value for " + cell.Address
End If
OldVals(cell.Address) = cell.Value
Next
End Sub
Like any similar method, this has its problems - first off, it won't know the "old" value until the value has actually been changed. To fix this you'd need to trap the Open event on the workbook and go through Sheet.UsedRange populating OldVals. Also, it will lose all its data if you reset the VBA project by stopping the debugger or some such.
SELECT (
SELECT COUNT(*)
FROM user_table
) AS tot_user,
(
SELECT COUNT(*)
FROM cat_table
) AS tot_cat,
(
SELECT COUNT(*)
FROM course_table
) AS tot_course
You use an anchor and a hash. For example:
Target of the Link:
<a name="name_of_target">Content</a>
Link to the Target:
<a href="#name_of_target">Link Text</a>
Or, if linking from a different page:
<a href="http://path/to/page/#name_of_target">Link Text</a>
std::string stringify(double x)
{
std::ostringstream o;
if (!(o << x))
throw BadConversion("stringify(double)");
return o.str();
}
C++ FAQ: http://www.parashift.com/c++-faq-lite/misc-technical-issues.html#faq-39.1
i am working in VScode currently. i was wanting to run my html page just to see all my main elements.
1) first, in vs, right click desired html file and choose "copy path". do not choose relative.
2) finally, paste html path in address bar (i used chrome) and hit enter. your html page should display. hope this helps someone out.
Instead of regular nx.draw you may want to use:
nx.draw_networkx(G[, pos, arrows, with_labels])
For example:
nx.draw_networkx(G, arrows=True, **options)
You can add options by initialising that ** variable like this:
options = {
'node_color': 'blue',
'node_size': 100,
'width': 3,
'arrowstyle': '-|>',
'arrowsize': 12,
}
Also some functions support the directed=True parameter
In this case this state is the default one:
G = nx.DiGraph(directed=True)
The networkx reference is found here.
I had an inversion problem, but a neat solution.
Motivation was that the XAML designer would show an empty control e.g. when there was no datacontext / no MyValues
(itemssource).
Initial code: hide control when MyValues
is empty.
Improved code: show control when MyValues
is NOT null or empty.
Ofcourse the problem is how to express '1 or more items', which is the opposite of 0 items.
<ListBox ItemsSource={Binding MyValues}">
<ListBox.Style x:Uid="F404D7B2-B7D3-11E7-A5A7-97680265A416">
<Style TargetType="{x:Type ListBox}">
<Style.Triggers>
<DataTrigger Binding="{Binding MyValues.Count}">
<Setter Property="Visibility" Value="Collapsed"/>
</DataTrigger>
</Style.Triggers>
</Style>
</ListBox.Style>
</ListBox>
I solved it by adding:
<DataTrigger Binding="{Binding MyValues.Count, FallbackValue=0, TargetNullValue=0}">
Ergo setting the default for the binding. Ofcourse this doesn't work for all kinds of inverse problems, but helped me out with clean code.
This usually happens when you commit first time to remote repository. As error clearly says "refusing to merge unrelated histories", we need to use --allow-unrelated-histories flag.
git pull origin master --allow-unrelated-histories
Now there would be some conflicts which we have to solve manually. After that just commit the code and push it.
$('html, body').animate({scrollTop:1200},'50');
You can do this!
I am using this from PowerShell:
dir -directory -name -recurse > list_my_folders.txt
It will work perfectly with 50px. Which will act as a static and thus as min-width.
font-size: calc(50px + 5vw);
If your class extends JFrame then use this.setTitle(newTitle.getText());
If not and it contains a JFrame let's say named myFrame, then use myFrame.setTitle(newTitle.getText());
Now that you have posted your program, it is obvious that you need only one JTextField to get the new title. These changes will do the trick:
JTextField poolLengthText, poolWidthText, poolDepthText, poolVolumeText, hotTub,
hotTubLengthText, hotTubWidthText, hotTubDepthText, hotTubVolumeText, temp, results,
newTitle;
and:
public void createOptions()
{
options = new JPanel();
options.setLayout(null);
JLabel labelOptions = new JLabel("Change Company Name:");
labelOptions.setBounds(120, 10, 150, 20);
options.add(labelOptions);
newTitle = new JTextField("Some Title");
newTitle.setBounds(80, 40, 225, 20);
options.add(newTitle);
// myTitle = new JTextField("My Title...");
// myTitle.setBounds(80, 40, 225, 20);
// myTitle.add(labelOptions);
JButton newName = new JButton("Set New Name");
newName.setBounds(60, 80, 150, 20);
newName.addActionListener(this);
options.add(newName);
JButton Exit = new JButton("Exit");
Exit.setBounds(250, 80, 80, 20);
Exit.addActionListener(this);
options.add(Exit);
}
and:
private void New_Name()
{
this.setTitle(newTitle.getText());
}
for me install Microsoft Visual C++ 2015 Redistributable Update 3 from https://www.microsoft.com/en-us/download/details.aspx?id=53587 solved it.
I'm running Windows 7 with git bash console. The above commands wouldn't work for me.
So I did it via Windows Explorer. I checked show hidden files, went to my projects directory and manually deleted the .git folder. Then back in the command line I checked by running git status.
Which returned...
fatal: Not a git repository (or any of the parent directories): .git
Which is exactly the result I wanted. It returned that the directory is not a git repository (anymore!).
Generally you compile most .c files in the following way:
gcc foo.c -o foo. It might vary depending on what #includes you used or if you have any external .h files. Generally, when you have a C file, it looks somewhat like the following:
#include <stdio.h>
/* any other includes, prototypes, struct delcarations... */
int main(){
*/ code */
}
When I get an 'undefined reference to main', it usually means that I have a .c file that does not have int main()
in the file. If you first learned java, this is an understandable manner of confusion since in Java, your code usually looks like the following:
//any import statements you have
public class Foo{
int main(){}
}
I would advise looking to see if you have int main()
at the top.
You can use overflow-y: scroll
for vertical scrolling.
<div style="overflow-y:scroll; height:400px; background:gray">_x000D_
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum._x000D_
_x000D_
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum._x000D_
_x000D_
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum._x000D_
_x000D_
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum._x000D_
_x000D_
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum._x000D_
_x000D_
</div>
_x000D_
I agree with several of the points I've read in this post and I've incorporated them into my solution to solve the exact same issue as the original posting.
That said, the comments I appreciated are:
"unless you are using .NET 1.0 or 1.1, use List<T>
instead of ArrayList
. "
"Also, add the item(s) to be deleted to a new list. Then go through and delete those items." .. in my case I just created a new List and the populated it with the valid data values.
e.g.
private List<string> managedLocationIDList = new List<string>();
string managedLocationIDs = ";1321;1235;;" // user input, should be semicolon seperated list of values
managedLocationIDList.AddRange(managedLocationIDs.Split(new char[] { ';' }));
List<string> checkLocationIDs = new List<string>();
// Remove any duplicate ID's and cleanup the string holding the list if ID's
Functions helper = new Functions();
checkLocationIDs = helper.ParseList(managedLocationIDList);
...
public List<string> ParseList(List<string> checkList)
{
List<string> verifiedList = new List<string>();
foreach (string listItem in checkList)
if (!verifiedList.Contains(listItem.Trim()) && listItem != string.Empty)
verifiedList.Add(listItem.Trim());
verifiedList.Sort();
return verifiedList;
}
("Jesse" or "jesse")
The above expression tests whether or not "Jesse"
evaluates to True
. If it does, then the expression will return it; otherwise, it will return "jesse"
. The expression is equivalent to writing:
"Jesse" if "Jesse" else "jesse"
Because "Jesse"
is a non-empty string though, it will always evaluate to True
and thus be returned:
>>> bool("Jesse") # Non-empty strings evaluate to True in Python
True
>>> bool("") # Empty strings evaluate to False
False
>>>
>>> ("Jesse" or "jesse")
'Jesse'
>>> ("" or "jesse")
'jesse'
>>>
This means that the expression:
name == ("Jesse" or "jesse")
is basically equivalent to writing this:
name == "Jesse"
In order to fix your problem, you can use the in
operator:
# Test whether the value of name can be found in the tuple ("Jesse", "jesse")
if name in ("Jesse", "jesse"):
Or, you can lowercase the value of name
with str.lower
and then compare it to "jesse"
directly:
# This will also handle inputs such as "JeSSe", "jESSE", "JESSE", etc.
if name.lower() == "jesse":
The full list of possible fields in the html based email-creating form:
<form action="mailto:[email protected]" method="GET">
<input name="subject" type="text" /></br>
<input name="cc" type="email" /><br />
<input name="bcc" type="email" /><br />
<textarea name="body"></textarea><br />
<input type="submit" value="Send" />
</form>
Here is another solution:
$env:HostIP = (
Get-NetIPConfiguration |
Where-Object {
$_.IPv4DefaultGateway -ne $null -and
$_.NetAdapter.Status -ne "Disconnected"
}
).IPv4Address.IPAddress
One difference is that:
:map
does nvo
== normal + (visual + select) + operator pending:map!
does ic
== insert + command-line modeas stated on help map-modes
tables.
So: map
does not map to all modes.
To map to all modes you need both :map
and :map!
.
You need to add schema locations to your bean definition, and then they can be found in classpath instead of fetched over the net. Given your formatting problems, I'm not 100% sure that you aren't doing this already.
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:context="http://www.springframework.org/schema/context"
xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-2.5.xsd">
<!-- empty: the beans we use are in the base class's context. -->
</beans>
With the latest aws-cli python command line tools, to recursively delete all the files under a folder in a bucket is just:
aws s3 rm --recursive s3://your_bucket_name/foo/
Or delete everything under the bucket:
aws s3 rm --recursive s3://your_bucket_name
If what you want is to actually delete the bucket, there is one-step shortcut:
aws s3 rb --force s3://your_bucket_name
which will remove the contents in that bucket recursively then delete the bucket.
Note: the s3://
protocol prefix is required for these commands to work
Try this for Amazon Linux AMI or for centOS
sudo service mysqld restart
Using can also use Java 8 stream API and do the same thing in one line.
If you want to print any specific property then use this syntax:
ArrayList<Room> rooms = new ArrayList<>();
rooms.forEach(room -> System.out.println(room.getName()));
OR
ArrayList<Room> rooms = new ArrayList<>();
rooms.forEach(room -> {
// here room is available
});
if you want to print all the properties of Java object then use this:
ArrayList<Room> rooms = new ArrayList<>();
rooms.forEach(System.out::println);
Sure , you will find the code below useful and easy to read and write. This is a util
class which you can use in your main method and then you are good to use all methods below.
public class ExcelUtils {
private static XSSFSheet ExcelWSheet;
private static XSSFWorkbook ExcelWBook;
private static XSSFCell Cell;
private static XSSFRow Row;
File fileName = new File("C:\\Users\\satekuma\\Pro\\Fund.xlsx");
public void setExcelFile(File Path, String SheetName) throws Exception
try {
FileInputStream ExcelFile = new FileInputStream(Path);
ExcelWBook = new XSSFWorkbook(ExcelFile);
ExcelWSheet = ExcelWBook.getSheet(SheetName);
} catch (Exception e) {
throw (e);
}
}
public static String getCellData(int RowNum, int ColNum) throws Exception {
try {
Cell = ExcelWSheet.getRow(RowNum).getCell(ColNum);
String CellData = Cell.getStringCellValue();
return CellData;
} catch (Exception e) {
return "";
}
}
public static void setCellData(String Result, int RowNum, int ColNum, File Path) throws Exception {
try {
Row = ExcelWSheet.createRow(RowNum - 1);
Cell = Row.createCell(ColNum - 1);
Cell.setCellValue(Result);
FileOutputStream fileOut = new FileOutputStream(Path);
ExcelWBook.write(fileOut);
fileOut.flush();
fileOut.close();
} catch (Exception e) {
throw (e);
}
}
}
This works:
switch (true) {
case liCount == 0:
setLayoutState('start');
var api = $('#UploadList').data('jsp');
api.reinitialise();
break;
case liCount<=5 && liCount>0:
setLayoutState('upload1Row');
var api = $('#UploadList').data('jsp');
api.reinitialise();
break;
case liCount<=10 && liCount>5:
setLayoutState('upload2Rows');
var api = $('#UploadList').data('jsp');
api.reinitialise();
break;
case liCount>10:
var api = $('#UploadList').data('jsp');
api.reinitialise();
break;
}
A previous version of this answer considered the parentheses to be the culprit. In truth, the parentheses are irrelevant here - the only thing necessary is switch(true){...}
and for your case expressions to evaluate to booleans.
It works because, the value we give to the switch is used as the basis to compare against. Consequently, the case expressions, also evaluating to booleans will determine which case is run. Could also turn this around, and pass switch(false){..}
and have the desired expressions evaluate to false instead of true.. but personally prefer dealing with conditions that evaluate to truthyness. However, it does work too, so worth keeping in mind to understand what it is doing.
Eg: if liCount is 3, the first comparison is true === (liCount == 0)
, meaning the first case is false. The switch then moves on to the next case true === (liCount<=5 && liCount>0)
. This expression evaluates to true, meaning this case is run, and terminates at the break
. I've added parentheses here to make it clearer, but they are optional, depending on the complexity of your expression.
It's pretty simple, and a neat way (if it fits with what you are trying to do) of handling a long series of conditions, where perhaps a long series of ìf() ... else if() ... else if () ...
might introduce a lot of visual noise or fragility.
Use with caution, because it is a non-standard pattern, despite being valid code.
Here is a way to check is virtualization is enabled or disabled by the firmware as suggested by this link in parallels.com.
How to check that Intel VT-x is supported in CPU:
Open Terminal application from Application/Utilities
Copy/paste command bellow
sysctl -a | grep machdep.cpu.features
Mac:~ user$ sysctl -a | grep machdep.cpu.features
kern.exec: unknown type returned
machdep.cpu.features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON VMX EST TM2 TPR PDCM
If you see VMX entry then CPU supports Intel VT-x feature, but it still may be disabled.
Refer to this link on Apple.com to enable hardware support for virtualization:
You can use this to solve your problem:
private async void btn_Go_Click(object sender, RoutedEventArgs e)
{
HttpClient webClient = new HttpClient();
Uri uri = new Uri("http://www.school-link.net/webservice/get_student/?id=" + txtVCode.Text);
HttpResponseMessage response = await webClient.GetAsync(uri);
var jsonString = await response.Content.ReadAsStringAsync();
var _Data = JsonConvert.DeserializeObject <List<Student>>(jsonString);
foreach (Student Student in _Data)
{
tb1.Text = Student.student_name;
}
}
I suggest using one of the exchange
methods that accepts an HttpEntity
for which you can also set the HttpHeaders
. (You can also specify the HTTP method you want to use.)
For example,
RestTemplate restTemplate = new RestTemplate();
HttpHeaders headers = new HttpHeaders();
headers.setAccept(Collections.singletonList(MediaType.APPLICATION_JSON));
HttpEntity<String> entity = new HttpEntity<>("body", headers);
restTemplate.exchange(url, HttpMethod.POST, entity, String.class);
I prefer this solution because it's strongly typed, ie. exchange
expects an HttpEntity
.
However, you can also pass that HttpEntity
as a request
argument to postForObject
.
HttpEntity<String> entity = new HttpEntity<>("body", headers);
restTemplate.postForObject(url, entity, String.class);
This is mentioned in the RestTemplate#postForObject
Javadoc.
The
request
parameter can be aHttpEntity
in order to add additional HTTP headers to the request.
The Media Source Extensions has been proposed which would allow for Adaptive Bitrate Streaming implementations.
Well, this is an old post but I will just contribute to the question -- someone may find it useful later:
adding 'cin.get();' function just before the return of the main() seems to always stop the program from exiting before printing the results: see sample code below:
int main(){ string fname, lname;
//ask user to enter name first and last name
cout << "Please enter your first name: ";
cin >> fname;
cout << "Please enter your last name: ";
cin >> lname;
cout << "\n\n\n\nyour first name is: " << fname << "\nyour last name is: "
<< lname <<endl;
//stop program from exiting before printing results on the screen
cin.get();
return 0;
}
So, I tried just about everything here and want to contribute one more solution that fixed all of my problems. My issues was not with line endings or actual permissions or anything like that. It was because I had installed Cygwin and whole host of stuff that comes with that, which unbeknownst to me also installed its own version of git. I never noticed this, just that I was having strange issues with users and files being marked as changed (because of perms changes).
It turns out that I figured this out because I thought I should just update Git to the latest version, which I did, but running git --version
returned the old version number. After the ensuing hunt for why, I found the cygwin bin directory root in my environment path, which contained a git executable, running at the old version number. Go figure.
This was also hard to find because I have TortoiseGit installed. My command line tools would use the cygwin version due to path fallbacks, and TortoiseGit was configured to use the windows version, making it even more confusing.
Hope this helps somebody.
Instead of using np.argsort
you could use np.argpartition
- if you only need the indices of the lowest/highest n elements.
That doesn't require to sort the whole array but just the part that you need but note that the "order inside your partition" is undefined, so while it gives the correct indices they might not be correctly ordered:
>>> avgDists = [1, 8, 6, 9, 4]
>>> np.array(avgDists).argpartition(2)[:2] # indices of lowest 2 items
array([0, 4], dtype=int64)
>>> np.array(avgDists).argpartition(-2)[-2:] # indices of highest 2 items
array([1, 3], dtype=int64)
Pattern p = Pattern.compile("(\\D+)(\\d+)(.*)");
Matcher m = p.matcher("this is your number:1234 thank you");
if (m.find()) {
String someNumberStr = m.group(2);
int someNumberInt = Integer.parseInt(someNumberStr);
}
Absolutely, yes you can. This link contains details about how you can achieve that: https://api.jquery.com/jquery.noconflict/.
Figured out quick solution, update your @NgModule code like this :
import { NgModule } from '@angular/core';
import { BrowserModule } from '@angular/platform-browser';
import { FormsModule } from '@angular/forms';
import { AppComponent } from './app.component';
@NgModule({
imports: [ BrowserModule, FormsModule ],
declarations: [ AppComponent ],
bootstrap: [ AppComponent ]
})
export class AppModule { }
Source: Can’t bind to ‘ngModel’ since it isn’t a known property of ‘input’
I also think chart.Boxplot is the best option, it gives you the position of the mean but if you have a matrix with returns all you need is one line of code to get all the boxplots in one graph.
Here is a small ETF portfolio example.
library(zoo)
library(PerformanceAnalytics)
library(tseries)
library(xts)
VTI.prices = get.hist.quote(instrument = "VTI", start= "2007-03-01", end="2013-03-01",
quote = c("AdjClose"),provider = "yahoo",origin ="1970-01-01",
compression = "m", retclass = c("zoo"))
VEU.prices = get.hist.quote(instrument = "VEU", start= "2007-03-01", end="2013-03-01",
quote = c("AdjClose"),provider = "yahoo",origin ="1970-01-01",
compression = "m", retclass = c("zoo"))
VWO.prices = get.hist.quote(instrument = "VWO", start= "2007-03-01", end="2013-03-01",
quote = c("AdjClose"),provider = "yahoo",origin ="1970-01-01",
compression = "m", retclass = c("zoo"))
VNQ.prices = get.hist.quote(instrument = "VNQ", start= "2007-03-01", end="2013-03-01",
quote = c("AdjClose"),provider = "yahoo",origin ="1970-01-01",
compression = "m", retclass = c("zoo"))
TLT.prices = get.hist.quote(instrument = "TLT", start= "2007-03-01", end="2013-03-01",
quote = c("AdjClose"),provider = "yahoo",origin ="1970-01-01",
compression = "m", retclass = c("zoo"))
TIP.prices = get.hist.quote(instrument = "TIP", start= "2007-03-01", end="2013-03-01",
quote = c("AdjClose"),provider = "yahoo",origin ="1970-01-01",
compression = "m", retclass = c("zoo"))
index(VTI.prices) = as.yearmon(index(VTI.prices))
index(VEU.prices) = as.yearmon(index(VEU.prices))
index(VWO.prices) = as.yearmon(index(VWO.prices))
index(VNQ.prices) = as.yearmon(index(VNQ.prices))
index(TLT.prices) = as.yearmon(index(TLT.prices))
index(TIP.prices) = as.yearmon(index(TIP.prices))
Prices.z=merge(VTI.prices, VEU.prices, VWO.prices, VNQ.prices,
TLT.prices, TIP.prices)
colnames(Prices.z) = c("VTI", "VEU", "VWO" , "VNQ", "TLT", "TIP")
returnscc.z = diff(log(Prices.z))
start(returnscc.z)
end(returnscc.z)
colnames(returnscc.z)
head(returnscc.z)
Return Matrix
ret.mat = coredata(returnscc.z)
class(ret.mat)
colnames(ret.mat)
head(ret.mat)
Box Plot of Return Matrix
chart.Boxplot(returnscc.z, names=T, horizontal=TRUE, colorset="darkgreen", as.Tufte =F,
mean.symbol = 20, median.symbol="|", main="Return Distributions Comparison",
element.color = "darkgray", outlier.symbol = 20,
xlab="Continuously Compounded Returns", sort.ascending=F)
You can try changing the mean.symbol, and remove or change the median.symbol. Hope it helped. :)
Use the matplotlib.arrow() function and set the parameters head_length and head_width to zero to don't get an "arrow-end". The connections between the different points can be simply calculated using vector addition with: A = [1,2], B=[3,4] --> Connection between A and B is B-A = [2,2]. Drawing this vector starting at the tip of A ends at the tip of B.
import numpy as np
import matplotlib.pyplot as plt
from matplotlib import style
style.use('fivethirtyeight')
A = np.array([[10,8],[1,2],[7,5],[3,5],[7,6],[8,7],[9,9],[4,5],[6,5],[6,8]])
fig = plt.figure(figsize=(10,10))
ax0 = fig.add_subplot(212)
ax0.scatter(A[:,0],A[:,1])
ax0.arrow(A[0][0],A[0][1],A[1][0]-A[0][0],A[1][1]-A[0][1],width=0.02,color='red',head_length=0.0,head_width=0.0)
ax0.arrow(A[2][0],A[2][1],A[9][0]-A[2][0],A[9][1]-A[2][1],width=0.02,color='red',head_length=0.0,head_width=0.0)
ax0.arrow(A[4][0],A[4][1],A[6][0]-A[4][0],A[6][1]-A[4][1],width=0.02,color='red',head_length=0.0,head_width=0.0)
plt.show()
I stumbled upon this question b/c I was trying to find the next sequence value by table. This didn't answer my question however this is how its done, and it may help those looking for the sequence value not by name but by table:
SELECT nextval(pg_get_serial_sequence('<your_table>', 'id')) AS new_id;
Hope it helps :)
This can be nearly done by setting a new variable as a flag to break
iterating:
{% set break = false %}
{% for post in posts if not break %}
<h2>{{ post.heading }}</h2>
{% if post.id == 10 %}
{% set break = true %}
{% endif %}
{% endfor %}
An uglier, but working example for continue
:
{% set continue = false %}
{% for post in posts %}
{% if post.id == 10 %}
{% set continue = true %}
{% endif %}
{% if not continue %}
<h2>{{ post.heading }}</h2>
{% endif %}
{% if continue %}
{% set continue = false %}
{% endif %}
{% endfor %}
But there is no performance profit, only similar behaviour to the built-in
break
andcontinue
statements like in flat PHP.
Copy the btn_check.xml from android-sdk/platforms/android-#/data/res/drawable to your project's drawable folder and change the 'on' and 'off' image states to your custom images.
Then your xml will just need android:button="@drawable/btn_check"
<CheckBox
android:button="@drawable/btn_check"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:checked="true" />
If you want to use different default android icons, you can use android:button="@android:drawable/..."
You should use method listName.isEmpty()
Tips from 2020:
From Flask 1.0, it defaults to enable multiple threads (source), you don't need to do anything, just upgrade it with:
$ pip install -U flask
If you are using flask run
instead of app.run()
with older versions, you can control the threaded behavior with a command option (--with-threads/--without-threads
):
$ flask run --with-threads
It's same as app.run(threaded=True)
My 2 cents with null coalescing operator ??
(since PHP 7)
function foo($blah, $x = null, $y = null) {
$varX = $x ?? 'Default value X';
$varY = $y ?? 'Default value Y';
// ...
}
You can check more examples on my repl.it
You should be able to access the 2d array with a simple pointer in place. The array[x][y] will be arranged in the pointer as p[0x * width + 0y][0x * width + 1y]...[0x * width + n-1y][1x * width + 0y] etc.
Use Eclipse with EPIC: It gives you a nice IDE with debugging possibilities, including the ability to place breakpoints and the Perl Expression View
for inspecting the value of variables.
Set below properties in class:
editText.setFocusable(false);
editText.setEnabled(false);
It will work smoothly as you required.
You may use the ==
operator to compare unicode objects for equality.
>>> s1 = u'Hello'
>>> s2 = unicode("Hello")
>>> type(s1), type(s2)
(<type 'unicode'>, <type 'unicode'>)
>>> s1==s2
True
>>>
>>> s3='Hello'.decode('utf-8')
>>> type(s3)
<type 'unicode'>
>>> s1==s3
True
>>>
But, your error message indicates that you aren't comparing unicode objects. You are probably comparing a unicode
object to a str
object, like so:
>>> u'Hello' == 'Hello'
True
>>> u'Hello' == '\x81\x01'
__main__:1: UnicodeWarning: Unicode equal comparison failed to convert both arguments to Unicode - interpreting them as being unequal
False
See how I have attempted to compare a unicode object against a string which does not represent a valid UTF8 encoding.
Your program, I suppose, is comparing unicode objects with str objects, and the contents of a str object is not a valid UTF8 encoding. This seems likely the result of you (the programmer) not knowing which variable holds unicide, which variable holds UTF8 and which variable holds the bytes read in from a file.
I recommend http://nedbatchelder.com/text/unipain.html, especially the advice to create a "Unicode Sandwich."
In C++11, lambda functions can not be templated, but in the next version of the ISO C++ Standard (often called C++14), this feature will be introduced. [Source]
Usage example:
auto get_container_size = [] (auto container) { return container.size(); };
Note that though the syntax uses the keyword auto
, the type deduction will not use the rules of auto
type deduction, but instead use the rules of template argument deduction. Also see the proposal for generic lambda expressions(and the update to this).
You cannot exactly get a list of commands started with nohup
but you can see them along with your other processes by using the command ps x
. Commands started with nohup
will have a question mark in the TTY column.
It's easy for disk file, but harder for Bitmap in memory.
System.Drawing.Bitmap bmp;
Image image;
...
MemoryStream ms = new MemoryStream();
bmp.Save(ms, System.Drawing.Imaging.ImageFormat.Png);
ms.Position = 0;
BitmapImage bi = new BitmapImage();
bi.BeginInit();
bi.StreamSource = ms;
bi.EndInit();
image.Source = bi;
HostingEnvironment.MapPath
System.Web.Hosting.HostingEnvironment.MapPath(path);
For relative imports see the documentation. A relative import is when you import from a module relative to that module's location, instead of absolutely from sys.path
.
As for import *
, Python 2 allowed star imports within functions, for instance:
>>> def f():
... from math import *
... print sqrt
A warning is issued for this in Python 2 (at least recent versions). In Python 3 it is no longer allowed and you can only do star imports at the top level of a module (not inside functions or classes).
In phpmyadmin, If you need to add a boolean datatype column to an existing table with default value true:
ALTER TABLE books
isAvailable boolean default true;
Although <input>
ignores the rows
attribute, you can take advantage of the fact that <textarea>
doesn't have to be inside <form>
tags, but can still be a part of a form by referencing the form's id:
<form method="get" id="testformid">
<input type="submit" />
</form>
<textarea form ="testformid" name="taname" id="taid" cols="35" wrap="soft"></textarea>
Of course, <textarea>
now appears below "submit" button, but maybe you'll find a way to reposition it.
You're trying to use the MatFormFieldComponent
in SearchComponent
but you're not importing the MatFormFieldModule
(which exports MatFormFieldComponent
); you only export it.
Your MaterialModule
needs to import it.
@NgModule({
imports: [
MatFormFieldModule,
],
exports: [
MatButtonModule,
MatFormFieldModule,
MatInputModule,
MatRippleModule,
],
declarations: [
SearchComponent,
],
})
export class MaterialModule { }
try
{
$conn = new PDO("sqlsrv:Server=$server_name;Database=$db_name;ConnectionPooling=0", "", "");
$conn->setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION);
}
catch(PDOException $e)
{
$e->getMessage();
}
Add the __all__
Variable to __init__.py
containing:
__all__ = ["bar", "spam", "eggs"]
The only test for NULL is IS NULL or IS NOT NULL. Testing for equality is nonsensical because by definition one doesn't know what the value is.
Here is a wikipedia article to read:
Give a try to Mongo-hacker(node module), it alway prints pretty. https://github.com/TylerBrock/mongo-hacker
More it enhances mongo shell (supports only ver>2.4, current ver is 3.0), like
I am using for while in production env, no problems yet.
Another scenario that you can get the [: too many arguments
or [: a: binary operator expected
errors is if you try to test for all arguments "$@"
if [ -z "$@" ]
then
echo "Argument required."
fi
It works correctly if you call foo.sh
or foo.sh arg1
. But if you pass multiple args like foo.sh arg1 arg2
, you will get errors. This is because it's being expanded to [ -z arg1 arg2 ]
, which is not a valid syntax.
The correct way to check for existence of arguments is [ "$#" -eq 0 ]
. ($#
is the number of arguments).
I got the default.properties error because the Android SDK wasn't installed on the machine I was using. What happened in my case was that I was setting up a second machine to development on.
After installing the SDK, the project imported just fine. You don't have to do New Project.
xxx.match(yyy, 'g').length
I'm building a booking system and found this page. I'm interested in range intersection only, so I built this structure; it is enough to play with DateTime ranges.
You can check Intersection and check if a specific date is in range, and get the intersection type and the most important: you can get intersected Range.
public struct DateTimeRange
{
#region Construction
public DateTimeRange(DateTime start, DateTime end) {
if (start>end) {
throw new Exception("Invalid range edges.");
}
_Start = start;
_End = end;
}
#endregion
#region Properties
private DateTime _Start;
public DateTime Start {
get { return _Start; }
private set { _Start = value; }
}
private DateTime _End;
public DateTime End {
get { return _End; }
private set { _End = value; }
}
#endregion
#region Operators
public static bool operator ==(DateTimeRange range1, DateTimeRange range2) {
return range1.Equals(range2);
}
public static bool operator !=(DateTimeRange range1, DateTimeRange range2) {
return !(range1 == range2);
}
public override bool Equals(object obj) {
if (obj is DateTimeRange) {
var range1 = this;
var range2 = (DateTimeRange)obj;
return range1.Start == range2.Start && range1.End == range2.End;
}
return base.Equals(obj);
}
public override int GetHashCode() {
return base.GetHashCode();
}
#endregion
#region Querying
public bool Intersects(DateTimeRange range) {
var type = GetIntersectionType(range);
return type != IntersectionType.None;
}
public bool IsInRange(DateTime date) {
return (date >= this.Start) && (date <= this.End);
}
public IntersectionType GetIntersectionType(DateTimeRange range) {
if (this == range) {
return IntersectionType.RangesEqauled;
}
else if (IsInRange(range.Start) && IsInRange(range.End)) {
return IntersectionType.ContainedInRange;
}
else if (IsInRange(range.Start)) {
return IntersectionType.StartsInRange;
}
else if (IsInRange(range.End)) {
return IntersectionType.EndsInRange;
}
else if (range.IsInRange(this.Start) && range.IsInRange(this.End)) {
return IntersectionType.ContainsRange;
}
return IntersectionType.None;
}
public DateTimeRange GetIntersection(DateTimeRange range) {
var type = this.GetIntersectionType(range);
if (type == IntersectionType.RangesEqauled || type==IntersectionType.ContainedInRange) {
return range;
}
else if (type == IntersectionType.StartsInRange) {
return new DateTimeRange(range.Start, this.End);
}
else if (type == IntersectionType.EndsInRange) {
return new DateTimeRange(this.Start, range.End);
}
else if (type == IntersectionType.ContainsRange) {
return this;
}
else {
return default(DateTimeRange);
}
}
#endregion
public override string ToString() {
return Start.ToString() + " - " + End.ToString();
}
}
public enum IntersectionType
{
/// <summary>
/// No Intersection
/// </summary>
None = -1,
/// <summary>
/// Given range ends inside the range
/// </summary>
EndsInRange,
/// <summary>
/// Given range starts inside the range
/// </summary>
StartsInRange,
/// <summary>
/// Both ranges are equaled
/// </summary>
RangesEqauled,
/// <summary>
/// Given range contained in the range
/// </summary>
ContainedInRange,
/// <summary>
/// Given range contains the range
/// </summary>
ContainsRange,
}
student_user = User.objects.get(id=user_id)
available_subjects = Subject.objects.exclude(subject_grade__student__user=student_user) # My ans
enrolled_subjects = SubjectGrade.objects.filter(student__user=student_user)
context.update({'available_subjects': available_subjects, 'student_user': student_user,
'request':request, 'enrolled_subjects': enrolled_subjects})
In my application above, i assume that once a student is enrolled, a subject SubjectGrade instance will be created that contains the subject enrolled and the student himself/herself.
Subject and Student User model is a Foreign Key to the SubjectGrade Model.
In "available_subjects", i excluded all the subjects that are already enrolled by the current student_user by checking all subjectgrade instance that has "student" attribute as the current student_user
PS. Apologies in Advance if you can't still understand because of my explanation. This is the best explanation i Can Provide. Thank you so much
Sometimes you may want to get just the quantity of the months between two dates totally ignoring the day part. So for instance, if you had two dates- 2013/06/21 and 2013/10/18- and you only cared about the 2013/06 and 2013/10 parts, here are the scenarios and possible solutions:
var date1=new Date(2013,5,21);//Remember, months are 0 based in JS
var date2=new Date(2013,9,18);
var year1=date1.getFullYear();
var year2=date2.getFullYear();
var month1=date1.getMonth();
var month2=date2.getMonth();
if(month1===0){ //Have to take into account
month1++;
month2++;
}
var numberOfMonths;
1.If you want just the number of the months between the two dates excluding both month1 and month2
numberOfMonths = (year2 - year1) * 12 + (month2 - month1) - 1;
2.If you want to include either of the months
numberOfMonths = (year2 - year1) * 12 + (month2 - month1);
3.If you want to include both of the months
numberOfMonths = (year2 - year1) * 12 + (month2 - month1) + 1;
The property file task is for editing properties files. It contains all sorts of nice features that allow you to modify entries. For example:
<propertyfile file="build.properties">
<entry key="build_number"
type="int"
operation="+"
value="1"/>
</propertyfile>
I've incremented my build_number
by one. I have no idea what the value was, but it's now one greater than what it was before.
<echo>
task to build a property file instead of <propertyfile>
. You can easily layout the content and then use <propertyfile>
to edit that content later on.Example:
<echo file="build.properties">
# Default Configuration
source.dir=1
dir.publish=1
# Source Configuration
dir.publish.html=1
</echo>
Example:
<propertyfile file="default.properties"
comment="Default Configuration">
<entry key="source.dir" value="1"/>
<entry key="dir.publish" value="1"/>
<propertyfile>
<propertyfile file="source.properties"
comment="Source Configuration">
<entry key="dir.publish.html" value="1"/>
<propertyfile>
<concat destfile="build.properties">
<fileset dir="${basedir}">
<include name="default.properties"/>
<include name="source.properties"/>
</fileset>
</concat>
<delete>
<fileset dir="${basedir}">
<include name="default.properties"/>
<include name="source.properties"/>
</fileset>
</delete>
You can use plt.grid
to draw a horizontal line.
import numpy as np
from matplotlib import pyplot as plt
from scipy.interpolate import UnivariateSpline
from matplotlib.ticker import LinearLocator
# your data here
annual = np.arange(1,21,1)
l = np.random.random(20)
spl = UnivariateSpline(annual,l)
xs = np.linspace(1,21,200)
# plot your data
plt.plot(xs,spl(xs),'b')
# horizental line?
ax = plt.axes()
# three ticks:
ax.yaxis.set_major_locator(LinearLocator(3))
# plot grids only on y axis on major locations
plt.grid(True, which='major', axis='y')
# show
plt.show()
I have same problem. I solved install this setup. (I use vs 2015 (4.6))
You need also $sce.trustAsResourceUrl
or it won't open the website inside the iframe:
angular.module('myApp', [])_x000D_
.controller('dummy', ['$scope', '$sce', function ($scope, $sce) {_x000D_
_x000D_
$scope.url = $sce.trustAsResourceUrl('https://www.angularjs.org');_x000D_
_x000D_
$scope.changeIt = function () {_x000D_
$scope.url = $sce.trustAsResourceUrl('https://docs.angularjs.org/tutorial');_x000D_
}_x000D_
}]);
_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/angularjs/1.2.23/angular.min.js"></script>_x000D_
_x000D_
<div ng-app="myApp" ng-controller="dummy">_x000D_
<iframe ng-src="{{url}}" width="300" height="200"></iframe>_x000D_
<br>_x000D_
<button ng-click="changeIt()">Change it</button>_x000D_
</div>
_x000D_
I found that my problem related to the actual registration of the DLL.
Simply
const char S[] = "ABCD";
should work.
What's your compiler?
You Can try This To Run Command Then cmd
Exits
Process.Start("cmd", "/c YourCode")
You Can try This To Run The Command And Let cmd
Wait For More Commands
Process.Start("cmd", "/k YourCode")
FWIW, htpasswd -n username
will output the result directly to stdout, and avoid touching files altogether.
According to this post by Stephen Cleary, Task.Factory.StartNew() is dangerous:
I see a lot of code on blogs and in SO questions that use Task.Factory.StartNew to spin up work on a background thread. Stephen Toub has an excellent blog article that explains why Task.Run is better than Task.Factory.StartNew, but I think a lot of people just haven’t read it (or don’t understand it). So, I’ve taken the same arguments, added some more forceful language, and we’ll see how this goes. :) StartNew does offer many more options than Task.Run, but it is quite dangerous, as we’ll see. You should prefer Task.Run over Task.Factory.StartNew in async code.
Here are the actual reasons:
- Does not understand async delegates. This is actually the same as point 1 in the reasons why you would want to use StartNew. The problem is that when you pass an async delegate to StartNew, it’s natural to assume that the returned task represents that delegate. However, since StartNew does not understand async delegates, what that task actually represents is just the beginning of that delegate. This is one of the first pitfalls that coders encounter when using StartNew in async code.
- Confusing default scheduler. OK, trick question time: in the code below, what thread does the method “A” run on?
Task.Factory.StartNew(A);
private static void A() { }
Well, you know it’s a trick question, eh? If you answered “a thread pool thread”, I’m sorry, but that’s not correct. “A” will run on whatever TaskScheduler is currently executing!
So that means it could potentially run on the UI thread if an operation completes and it marshals back to the UI thread due to a continuation as Stephen Cleary explains more fully in his post.
In my case, I was trying to run tasks in the background when loading a datagrid for a view while also displaying a busy animation. The busy animation didn't display when using Task.Factory.StartNew()
but the animation displayed properly when I switched to Task.Run()
.
For details, please see https://blog.stephencleary.com/2013/08/startnew-is-dangerous.html
Go inside your phpMyAdmin directory inside XAMPP installation folder. There will be a file called config.inc.php. Inside that file, find this line:
$cfg['Servers'][$i]['password'] = '';
you must make sure that this field has your mysql root password (the one that you set).
It's the response code a SIP User Agent Server (UAS) will send to the client after the client sends a CANCEL request for the original unanswered INVITE request (yet to receive a final response).
Here is a nice CANCEL SIP Call Flow illustration.
Context means Android get to know in which activity I should go for or act in.
1 - Toast.makeText(context, "Enter All Details", Toast.LENGTH_SHORT).show();
it used in this.
Context context = ActivityName.this;
2 -startActivity(new Intent(context,LoginActivity.class));
in this context means from which activity you wanna go to other activity. context or ActivityName.this is faster then , getContext and getApplicatinContext.
do like this-paste your html code inside your separate html file using GET method.
$mail->IsHTML(true);
$mail->WordWrap = 70;
$mail->addAttachment= $_GET['addattachment']; $mail->AltBody
=$_GET['AltBody']; $mail->Subject = $_GET['subject']; $mail->Body = $_GET['body'];
=UNIQUE({filter(Core!L8:L27,isblank(Core!L8:L27)=false),query(ArrayFormula(countif(Core!L8:L27,Core!L8:L27)),"select Col1 where Col1 <> 0")})
Core!L8:L27 = list
Using pure bash :
$ cat file.txt
US/Central - 10:26 PM (CST)
$ while read a b time x; do [[ $b == - ]] && echo $time; done < file.txt
another solution with bash regex :
$ [[ "US/Central - 10:26 PM (CST)" =~ -[[:space:]]*([0-9]{2}:[0-9]{2}) ]] &&
echo ${BASH_REMATCH[1]}
another solution using grep
and look-around advanced regex :
$ echo "US/Central - 10:26 PM (CST)" | grep -oP "\-\s+\K\d{2}:\d{2}"
another solution using sed :
$ echo "US/Central - 10:26 PM (CST)" |
sed 's/.*\- *\([0-9]\{2\}:[0-9]\{2\}\).*/\1/'
another solution using perl :
$ echo "US/Central - 10:26 PM (CST)" |
perl -lne 'print $& if /\-\s+\K\d{2}:\d{2}/'
and last one using awk :
$ echo "US/Central - 10:26 PM (CST)" |
awk '{for (i=0; i<=NF; i++){if ($i == "-"){print $(i+1);exit}}}'
You don't need to create the table first and then add the keys in subsequent steps. You can add both primary key and foreign key while creating the table:
This example assumes the existence of a table (Codes
) that we would want to reference with our foreign key.
CREATE TABLE d (
id [numeric](1),
code [varchar](2),
PRIMARY KEY (id, code),
CONSTRAINT fk_d_codes FOREIGN KEY (code) REFERENCES Codes (code)
)
If you don't have a table that we can reference, add one like this so that the example will work:
CREATE TABLE Codes (
Code [varchar](2) PRIMARY KEY
)
NOTE: you must have a table to reference before creating the foreign key.
The . (dot) operator is usually used to get a field / call a method from an instance of class (or a static field / method of a class).
p.myField, p.myMethod() - p instance of a class
The -> (arrow) operator is used to get a field / call a method from the content pointed by the class.
p->myField, p->myMethod() - p points to a class
For deleting all data:
HTML FILE
class="btn btn-primary" href="{% url 'delete_product'%}">Delete
Put the above code in an anchor tag. (the a tag!)
url.py
path('delete_product', views.delete_product, name='delete_product')]
views.py
def delete_product(request):
if request.method == "GET":
dest = Racket.objects.all()
dest.delete()
return render(request, "admin_page.html")
Try this function...
function calculate_age(birth_month,birth_day,birth_year)
{
today_date = new Date();
today_year = today_date.getFullYear();
today_month = today_date.getMonth();
today_day = today_date.getDate();
age = today_year - birth_year;
if ( today_month < (birth_month - 1))
{
age--;
}
if (((birth_month - 1) == today_month) && (today_day < birth_day))
{
age--;
}
return age;
}
OR
function getAge(dateString)
{
var today = new Date();
var birthDate = new Date(dateString);
var age = today.getFullYear() - birthDate.getFullYear();
var m = today.getMonth() - birthDate.getMonth();
if (m < 0 || (m === 0 && today.getDate() < birthDate.getDate()))
{
age--;
}
return age;
}
Well, there's no need to call .Name.ToString()
, but broadly that is about it, yes. The only consideration you might need is whether x.Foo.Bar
should return "Foo", "Bar", or an exception - i.e. do you need to iterate at all.
(re comment) for more on flexible sorting, see here.
A PDOStatement
(which you have in $users
) is a forward-cursor. That means, once consumed (the first foreach
iteration), it won't rewind to the beginning of the resultset.
You can close the cursor after the foreach
and execute the statement again:
$users = $dbh->query($sql);
foreach ($users as $row) {
print $row["name"] . "-" . $row["sex"] ."<br/>";
}
$users->execute();
foreach ($users as $row) {
print $row["name"] . "-" . $row["sex"] ."<br/>";
}
Or you could cache using tailored CachingIterator
with a fullcache:
$users = $dbh->query($sql);
$usersCached = new CachedPDOStatement($users);
foreach ($usersCached as $row) {
print $row["name"] . "-" . $row["sex"] ."<br/>";
}
foreach ($usersCached as $row) {
print $row["name"] . "-" . $row["sex"] ."<br/>";
}
You find the CachedPDOStatement
class as a gist. The caching itertor is probably more sane than storing the resultset into an array because it still offers all properties and methods of the PDOStatement
object it has wrapped.
without explicit comparator:
Collections.sort(list, Collections.reverseOrder());
with explicit comparator:
Collections.sort(list, Collections.reverseOrder(new Comparator()));
For others who need to do this with just stock .NET and PowerShell (no additional SQL tools installed) here is the function that I use:
function Invoke-SQL {
param(
[string] $dataSource = ".\SQLEXPRESS",
[string] $database = "MasterData",
[string] $sqlCommand = $(throw "Please specify a query.")
)
$connectionString = "Data Source=$dataSource; " +
"Integrated Security=SSPI; " +
"Initial Catalog=$database"
$connection = new-object system.data.SqlClient.SQLConnection($connectionString)
$command = new-object system.data.sqlclient.sqlcommand($sqlCommand,$connection)
$connection.Open()
$adapter = New-Object System.Data.sqlclient.sqlDataAdapter $command
$dataset = New-Object System.Data.DataSet
$adapter.Fill($dataSet) | Out-Null
$connection.Close()
$dataSet.Tables
}
I have been using this so long I don't know who wrote which parts. This was distilled from others' examples, but simplified to be clear and just what is needed without extra dependencies or features.
I use and share this often enough that I have turned this into a script module on GitHub so that you can now go to your modules directory and execute git clone https://github.com/ChrisMagnuson/InvokeSQL
and from that point forward invoke-sql will automatically be loaded when you go to use it (assuming your using PowerShell v3 or later).
JButton close = new JButton("Close");
close.addActionListener(this);
public void actionPerformed(ActionEvent closing) {
// getSource() checks for the source of clicked Button , compares with the name of button in which here is close .
if(closing.getSource()==close)
System.exit(0);
// This exit Your GUI
}
/*Some Answers were asking for @override which is overriding the method the super class or the parent class and creating different objects and etc which makes the answer too long . Note : we just need to import java.awt.*; and java.swing.*; and Adding this command : class className implements actionListener{} */
Taking Shiraz's idea and running with it...
In your application, are you explicitly defining a domain User Account and Password to access AD?
When you are executing the application explicitly it may be inherently using your credentials (your currently logged in domain account) to interrogate AD. However, when calling the application from the script, I'm not sure if the application is in the System context.
A VBScript example would be as follows:
Dim objConnection As ADODB.Connection
Set objConnection = CreateObject("ADODB.Connection")
objConnection.Provider = "ADsDSOObject"
objConnection.Properties("User ID") = "MyDomain\MyAccount"
objConnection.Properties("Password") = "MyPassword"
objConnection.Open "Active Directory Provider"
If this works, of course it would be best practice to create and use a service account specifically for this task, and to deny interactive login to that account.
According to the documentation.
If you are running on the TensorFlow or CNTK backends, your code will automatically run on GPU if any available GPU is detected.
You can check what all devices are used by tensorflow by -
from tensorflow.python.client import device_lib
print(device_lib.list_local_devices())
Also as suggested in this answer
import tensorflow as tf
sess = tf.Session(config=tf.ConfigProto(log_device_placement=True))
This will print whether your tensorflow is using a CPU or a GPU backend. If you are running this command in jupyter notebook, check out the console from where you have launched the notebook.
If you are sceptic whether you have installed the tensorflow gpu version or not. You can install the gpu version via pip.
pip install tensorflow-gpu
Sort the unsorted hashmap in ascending order.
// Sorting the list based on values
Collections.sort(list, new Comparator<Entry<String, Integer>>() {
public int compare(Entry<String, Integer> o1, Entry<String, Integer> o2)
{
return o2.getValue().compareTo(o1.getValue());
}
});
// Maintaining insertion order with the help of LinkedList
Map<String, Integer> sortedMap = new LinkedHashMap<String, Integer>();
for (Entry<String, Integer> entry : list) {
sortedMap.put(entry.getKey(), entry.getValue());
}
Just throwing another solution in the mix...
Try jq
, a lightweight and flexible command-line JSON processor:
jq length /tmp/test.json
Prints the length of the array of objects.
Try this method to get path of original
image captured by camera.
public String getOriginalImagePath() {
String[] projection = { MediaStore.Images.Media.DATA };
Cursor cursor = getActivity().managedQuery(
MediaStore.Images.Media.EXTERNAL_CONTENT_URI,
projection, null, null, null);
int column_index_data = cursor
.getColumnIndexOrThrow(MediaStore.Images.Media.DATA);
cursor.moveToLast();
return cursor.getString(column_index_data);
}
This method will return path of the last image captured by camera. So this path would be of original image not of thumbnail bitmap.
The main problem with your example code is that the $result
variable you use to store the output of curl_exec()
does not contain the body of the HTTP response - it contains the value true
. If you try to print_r()
that, it will just say "1".
The curl_exec()
reference explains:
Return Values
Returns
TRUE
on success orFALSE
on failure. However, if theCURLOPT_RETURNTRANSFER
option is set, it will return the result on success,FALSE
on failure.
So if you want to get the HTTP response body in your $result
variable, you must first run
curl_setopt($cURL, CURLOPT_RETURNTRANSFER, true);
After that, you can call json_decode()
on $result
, as other answers have noted.
On a general note - the curl library for PHP is useful and has a lot of features to handle the minutia of HTTP protocol (and others), but if all you want is to GET
some resource or even POST
to some URL, and read the response - then file_get_contents()
is all you'll ever need: it is much simpler to use and have much less surprising behavior to worry about.
I was having a problem fetching profile photos while using CURL. I thought for a while there was something wrong my implementation of the Facebook API, but I need to add a bit to my CURL called:
curl_setopt($ch, CURLOPT_FOLLOWLOCATION, true);
You could iterate on a copy (clone) of your original list:
List<String> copy = new ArrayList<String>(list);
for (String s : copy) {
// And if you have to add an element to the list, add it to the original one:
list.add("some element");
}
Note that it is not even possible to add a new element to a list while iterating on it, because it will result in a ConcurrentModificationException
.
Here's my O(n log n) solution in Ruby:
def solution(t)
sorted, inversion_count = sort_inversion_count(t)
return inversion_count
end
def sort_inversion_count(t)
midpoint = t.length / 2
left_half = t[0...midpoint]
right_half = t[midpoint..t.length]
if midpoint == 0
return t, 0
end
sorted_left_half, left_half_inversion_count = sort_inversion_count(left_half)
sorted_right_half, right_half_inversion_count = sort_inversion_count(right_half)
sorted = []
inversion_count = 0
while sorted_left_half.length > 0 or sorted_right_half.length > 0
if sorted_left_half.empty?
sorted.push sorted_right_half.shift
elsif sorted_right_half.empty?
sorted.push sorted_left_half.shift
else
if sorted_left_half[0] > sorted_right_half[0]
inversion_count += sorted_left_half.length
sorted.push sorted_right_half.shift
else
sorted.push sorted_left_half.shift
end
end
end
return sorted, inversion_count + left_half_inversion_count + right_half_inversion_count
end
And some test cases:
require "minitest/autorun"
class TestCodility < Minitest::Test
def test_given_example
a = [-1, 6, 3, 4, 7, 4]
assert_equal solution(a), 4
end
def test_empty
a = []
assert_equal solution(a), 0
end
def test_singleton
a = [0]
assert_equal solution(a), 0
end
def test_none
a = [1,2,3,4,5,6,7]
assert_equal solution(a), 0
end
def test_all
a = [5,4,3,2,1]
assert_equal solution(a), 10
end
def test_clones
a = [4,4,4,4,4,4]
assert_equal solution(a), 0
end
end