After changing the target to matching version (as explained by Ben), if it still shows errors then just run "Clean" on the project to clear resource errors.

I changed

compile 'com.android.support:appcompat-v7:19.1.+'

into

compile 'com.android.support:appcompat-v7:22.1.+'

in build.gradle and after sync I didn't get any errors

It's because the tab is a naming container aswell... your update should be update="Search:insTable:display" What you can do aswell is just place your dialog outside the form and still inside the tab then it would be: update="Search:display"

use <meta http-equiv="X-Frame-Options" content="allow"> in the one to show in the iframe to allow it.

Up above, you mention having compiling your as part of your steps to reproduce, but then below you made an edit saying,

"is there a way to see on which distro a shared library was compiled on?"

Whether or not you compiled this on the same distro, and even a different version of the same distro is an important detail, especially for c++ applications.

Linking to c++ libraries, including libstdc++ can have mixed results, as far as I can tell. Here is a related question about recompiling with different versions of c++.

do we need to recompile libraries with c++11?

Basically, if you compiled against c++ on a different distro (and possibly different gcc version), this may be causing your trouble.

I think you have two options:

1. Your best bet - recompile your .so if you hadn't compiled it on your current system. If there is a problem with your runtime's system environment, it might even come out in the compile.
2. Bundle your other compiler's c++ libs along with your application. This may only be viable if it's the same distribution... But it's a useful trick if you rolled your own compiler. You will also have to set and export the LD_LIBRARY_PATH to the path containing your bundled stdc++ libs if you go that route.

Just to extend the accepted answer:

From version 2.7 and 3.1 python has got set literal {} in form of usage {1,2,3}, but {} itself still used for empty dict.

Python 2.7 (first line is invalid in Python <2.7)

>>> {1,2,3}.__class__
<type 'set'>
>>> {}.__class__
<type 'dict'>

Python 3.x

>>> {1,2,3}.__class__
<class 'set'>
>>> {}.__class__
<class 'dict'>

More here: https://docs.python.org/3/whatsnew/2.7.html#other-language-changes

Though there are many answers, myself facing the repeated issue when username or password has special characters in it.

URL encode your username and password for git, then use it as part of URL itself (when there is no security concern).

Say, URL encoded value of username

'user+1' is user%2B1

and URL encoded value of password

'Welcome@1234' is Welcome%401234

Then your GIT Clone URL would look like,

git clone https://user%2B1:Welcome%401234@actual-git-url-for-the-repo works perfectly, whereas,

git clone https://user+1:Welcome@1234@actual-git-url-for-the-repo gives you 403 errors

Hope this helps.

Just in case, want to URL encode online: https://www.urlencoder.org/

I call $scope.$apply like this to ignored call multiple in one times.

      var callApplyTimeout = null;
      function callApply(callback) {
          if (!callback) callback = function () { };
          if (callApplyTimeout) $timeout.cancel(callApplyTimeout);

          callApplyTimeout = $timeout(function () {
              callback();
              $scope.$apply();
              var d = new Date();
              var m = d.getMilliseconds();
              console.log('$scope.$apply(); call ' + d.toString() + ' ' + m);
          }, 300);
      }

simply call

callApply();

Take a look into jQuery's .load() function:

<script>
    $(function(){
        $('#siteloader').load('http://www.somesitehere.com');
    });
</script>

However, this only works on the same domain of the JS file.

For me this was resolved by adding an explicit default constructor

public MyClassName (){}

Unpack it where ever you like. In Android Studio under Settings is category Gradle where you can specify external gradle location if you want. It probably makes sense to put gradle bin folder into your path.

Here is an simple example:

$("#country_id").change(function(){
    if(this.value.toString() == ""){
        return;
    }
    alert("You just changed country to: " + $("#country_id option:selected").text() + " which carried the value for country_id as: " + this.value.toString());
});

Browser limits are:

Browser           Address bar    document.location
                                 or anchor tag
---------------------------------------------------
Chrome                32779           >64k
Android                8192           >64k
Firefox                >64k           >64k
Safari                 >64k           >64k
Internet Explorer 11   2047           5120
Edge 16                2047          10240

Want more? See this question on Stack Overflow.

When a web browser moves from one website to another and between pages of a website, it can optionally pass the URL it came from. This is called the HTTP_REFERER, So if you don't redirect from one page to another it might be missing

If the HTTP_REFERER has been set then it will be displayed. If it is not then you won't see anything. If it's not set and you have error reporting set to show notices, you'll see an error like this instead:

 Notice: Undefined index: HTTP_REFERER in /path/to/filename.php

To prevent this error when notices are on (I always develop with notices on), you can do this:

  if(isset($_SERVER['HTTP_REFERER'])) {
      echo $_SERVER['HTTP_REFERER'];
   }

OR

 echo isset($_SERVER['HTTP_REFERER']) ? $_SERVER['HTTP_REFERER'] : '';

It can be useful to use the HTTP_REFERER variable for logging etc purposes using the $_SERVER['HTTP_REFERER'] superglobal variable. However it is important to know it's not always set so if you program with notices on then you'll need to allow for this in your code

You dont need jquery-migrate. Summarizing previous answers, here is a working html:

<html>
<body>
  <a id='linkButton'>ClickMe</a>
  <script src="http://code.jquery.com/jquery-1.9.1.min.js"></script>
  <link href="https://cdnjs.cloudflare.com/ajax/libs/toastr.js/2.0.1/css/toastr.css" rel="stylesheet"/>
  <script src="https://cdnjs.cloudflare.com/ajax/libs/toastr.js/2.0.1/js/toastr.js"></script>
  <script type="text/javascript">
  $(document).ready(function() {
    toastr.options.timeOut = 1500; // 1.5s
    toastr.info('Page Loaded!');
    $('#linkButton').click(function() {
       toastr.success('Click Button');
    });
  });
  </script>
</body>
</html>

additionally you may want mongo to run on another port, then paste this command on terminal,

mongod --dbpath /data/db/ --port 27018

where 27018 is the port we want mongo to run on

assumptions

1. mongod exists in your bin i.e /usr/local/bin/ for mac ( which would be if you installed with brew), otherwise you'd need to navigate to the path where mongo is installed
2. the folder /data/db/ exists

You can add a style.css, import this file after the bootstrap.css to override this code.

For example:

/* bootstrap.css */
* {
   font-size: 14px;
   line-height: 1.428;
}

/* style.css */
* {
   font-size: 16px;
   line-height: 2;
}

Don't change bootstrap.css directly for better maintenance of code.

Here is a procedure that should truncate all tables in the local database.

Let me know if it doesn't work and I'll delete this answer.

Untested

CREATE PROCEDURE truncate_all_tables()
BEGIN

   -- Declare local variables
   DECLARE done BOOLEAN DEFAULT 0;
   DECLARE cmd VARCHAR(2000);

   -- Declare the cursor
   DECLARE cmds CURSOR
   FOR
   SELECT CONCAT('TRUNCATE TABLE ', TABLE_NAME) FROM INFORMATION_SCHEMA.TABLES;

   -- Declare continue handler
   DECLARE CONTINUE HANDLER FOR SQLSTATE '02000' SET done=1;

   -- Open the cursor
   OPEN cmds;

   -- Loop through all rows
   REPEAT

      -- Get order number
      FETCH cmds INTO cmd;

      -- Execute the command
      PREPARE stmt FROM cmd;
      EXECUTE stmt;
      DROP PREPARE stmt;

   -- End of loop
   UNTIL done END REPEAT;

   -- Close the cursor
   CLOSE cmds;

END;

public partial class result : System.Web.UI.Page
{
    static DataTable table1 = new DataTable("Shashank");
    static DataSet set = new DataSet("office");


    protected void Page_Load(object sender, EventArgs e)
    {
        lblEmployeeNumber.Text = HttpContext.Current.Request.Form["txtEmployeeNumber"];
        lblFirstName.Text = Request.Form["txtFirstName"];
        lblLastName.Text = Request.Form["txtLastName"];
        lblTitle.Text = Request.Form["txtTitle"];

        Int32 Rcount = Convert.ToInt32(table1.Rows.Count);

        if (Rcount == 0)
        {

            table1.Columns.Add("ID");
            table1.Columns.Add("FName");
            table1.Columns.Add("LName");
            table1.Columns.Add("Title");
            table1.Rows.Add(lblEmployeeNumber.Text, lblFirstName.Text, lblLastName.Text, lblTitle.Text);
            set.Tables.Add(table1);
        }
        else
        {
            if (lblEmployeeNumber.Text != "")
            {
                DataRow dr = table1.NewRow();
                dr["ID"] = lblEmployeeNumber.Text;
                dr["FName"] = lblFirstName.Text;
                dr["LName"] = lblLastName.Text;
                dr["Title"] = lblTitle.Text;
                table1.Rows.Add(dr);
            }
        }

        gvrEmp.DataSource = set;
        gvrEmp.DataBind();

    }
}

This exception was occurring for me from a .NET console app running as a scheduled task, and I was trying to do basically the same thing - create a new Event Source and write to the event log.

In the end, setting full permissions for the user under which the task was running on the following keys did the trick for me:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Application
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Security
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog

try this code....

 @Override
    public boolean onCreateOptionsMenu(Menu menu) {
        MenuInflater inflater = getMenuInflater();
         inflater.inflate(R.menu.my_menu, menu);

        getLayoutInflater().setFactory(new Factory() {
            @Override
            public View onCreateView(String name, Context context,
                    AttributeSet attrs) {

                if (name.equalsIgnoreCase("com.android.internal.view.menu.IconMenuItemView")) {
                    try {
                        LayoutInflater f = getLayoutInflater();
                        final View view = f.createView(name, null, attrs);

                        new Handler().post(new Runnable() {
                            public void run() {

                                // set the background drawable
                                 view.setBackgroundResource(R.drawable.my_ac_menu_background);

                                // set the text color
                                ((TextView) view).setTextColor(Color.WHITE);
                            }
                        });
                        return view;
                    } catch (InflateException e) {
                    } catch (ClassNotFoundException e) {
                    }
                }
                return null;
            }
        });
        return super.onCreateOptionsMenu(menu);
    }

This code extracts the YouTube video duration using the YouTube API v3 by passing a video ID. It worked for me.

<?php
    function getDuration($videoID){
       $apikey = "YOUR-Youtube-API-KEY"; // Like this AIcvSyBsLA8znZn-i-aPLWFrsPOlWMkEyVaXAcv
       $dur = file_get_contents("https://www.googleapis.com/youtube/v3/videos?part=contentDetails&id=$videoID&key=$apikey");
       $VidDuration =json_decode($dur, true);
       foreach ($VidDuration['items'] as $vidTime)
       {
           $VidDuration= $vidTime['contentDetails']['duration'];
       }
       preg_match_all('/(\d+)/',$VidDuration,$parts);
       return $parts[0][0] . ":" .
              $parts[0][1] . ":".
              $parts[0][2]; // Return 1:11:46 (i.e.) HH:MM:SS
    }

    echo getDuration("zyeubYQxHyY"); // Video ID
?>

You can get your domain's own YouTube API key on https://console.developers.google.com and generate credentials for your own requirement.

Running The Alter Command

1.Click the SQL tab at the top.

2.In the text box enter the following command: ALTER TABLE exampletable RENAME TO new_table_name;

3.Click the go button.

source : https://my.bluehost.com/hosting/help/2158

The server_name^docs directive is used to identify virtual hosts, they're not used to set the binding.

netstat tells you that nginx listens on 0.0.0.0:80 which means that it will accept connections from any IP.

If you want to change the IP nginx binds on, you have to change the listen^docs rule.
So, if you want to set nginx to bind to localhost, you'd change that to:

listen 127.0.0.1:80;

In this way, requests that are not coming from localhost are discarded (they don't even hit nginx).

If you wish to use CV2, you need to use the resize function.

For example, this will resize both axes by half:

small = cv2.resize(image, (0,0), fx=0.5, fy=0.5) 

and this will resize the image to have 100 cols (width) and 50 rows (height):

resized_image = cv2.resize(image, (100, 50)) 

Another option is to use scipy module, by using:

small = scipy.misc.imresize(image, 0.5)

There are obviously more options you can read in the documentation of those functions (cv2.resize, scipy.misc.imresize).

Update:
According to the SciPy documentation:

imresize is deprecated in SciPy 1.0.0, and will be removed in 1.2.0.
Use skimage.transform.resize instead.

Note that if you're looking to resize by a factor, you may actually want skimage.transform.rescale.

You can use the display property of style. Intialy set the result section style as

style = "display:none"

Then the div will not be visible and there won't be any white space.

Once the search results are being populated change the display property using the java script like

document.getElementById("someObj").style.display = "block"

Using java script you can make the div invisible

document.getElementById("someObj").style.display = "none"

This can work as well.

if (tabControl.SelectedTab.Text == "tabText" )
{
    .. do stuff
}

It seems there are 2 adb version in your system. Please find them out and keep the adb in your Android SDK folder only, delete all others folders that including adb file. You can find out which adb you are using from Application Monitor:

It might be a problem if the adb is not the one in you Android SDK folder.

In my case, I found I was running adb from here:

/Library/Application Support/RSupport/Mobizen2

after deleting the Mobizen2 folder, then all adb commands work fine.

use this :

.Absolute-Center {
    margin: auto;
    position: absolute;
    top: 0; left: 0; bottom: 0; right: 0;
}

refer this link: https://www.smashingmagazine.com/2013/08/absolute-horizontal-vertical-centering-css/

The following answer is to merge data into same table

MERGE INTO YOUR_TABLE d
USING (SELECT 1 FROM DUAL) m
    ON ( d.USER_ID = '123' AND d.USER_NAME= 'itszaif') 
WHEN NOT MATCHED THEN
        INSERT ( d.USERS_ID, d.USER_NAME)
        VALUES ('123','itszaif');

This command checks if USER_ID and USER_NAME are matched, if not matched then it will insert.

I managed to install php54w according to Simon's suggestion, but then my sites stopped working perhaps because of an incompatibility with php-mysql or some other module. Even frantically restoring the old situation was not amusing: for anyone in my own situation the sequence is:

sudo yum remove php54w
sudo yum remove php54w-common
sudo yum install php-common
sudo yum install php-mysql
sudo yum install php

It would be nice if someone submitted the full procedure to update all the php packet. That was my production server and my heart is still rapidly beating.

First set width=100 and Height=100 of button

Objective C Solution

YourBtn1.layer.cornerRadius=YourBtn1.Frame.size.width/2;
YourBtn1.layer.borderColor=[uicolor blackColor].CGColor;
YourBtn1.layer.borderWidth=1.0f;

Swift 4 Solution

YourBtn1.layer.cornerRadius = YourBtn1.Frame.size.width/2
YourBtn1.layer.borderColor = UIColor.black.cgColor
YourBtn1.layer.borderWidth = 1.0

All the answers here discuss about onclick method, however you can also use addEventListener().

Syntax of addEventListener()

document.getElementById('button').addEventListener("click",{function defination});

The function defination above is known as anonymous function.

If you don't want to use anonymous functions you can also use function refrence.

function functionName(){
//function defination
}



document.getElementById('button').addEventListener("click",functionName);

You can check the detail differences between onclick() and addEventListener() in this answer here.

Moment.js stores dates it utc and can apply different timezones to it. By default it applies your local timezone. If you want to set time on utc date time you need to specify utc timezone.

Try the following code:

var m = moment().utcOffset(0);
m.set({hour:0,minute:0,second:0,millisecond:0})
m.toISOString()
m.format()

Just because the bean injected into the controller is prototype-scoped doesn't mean the controller is!

Late to the party, but for posterity, the stringr package (part of the popular "tidyverse" suite of packages) now provides functions with harmonised signatures for string handling:

string <- c("G1:E001", "G2:E002", "G3:E003")
# match string to keep
stringr::str_extract(string = string, pattern = "E[0-9]+")
# [1] "E001" "E002" "E003"

# replace leading string with ""
stringr::str_remove(string = string, pattern = "^.*:")
# [1] "E001" "E002" "E003"

The Approach posted by BlueRaja is slow I modified it as I was using to delete duplicates from the table. In case it helps anyone with large tables Original Query

delete from table where id not in (select min(id) from table group by field 2)

This is taking more time:

DELETE FROM table where ID NOT IN(
  SELECT MIN(t.Id) from (select Id,field2 from table) AS t GROUP BY field2)

Faster Solution

DELETE FROM table where ID NOT IN(
   SELECT x.Id from (SELECT MIN(Id) as Id from table GROUP BY field2) AS t)

If I understand what you are asking, it is a regular expression like this:

^(8768|9875|2353)

This matches the three sets of digit strings at beginning of line only.

So the question is how can I check if my array already has a "horse" included so that I don't fill it with the same horse?

While the answers are concerned with looking through the array to see if a particular string or object exists, that's really going about it wrong, because, as the array gets larger, the search will take longer.

Instead, use either a Hash, or a Set. Both only allow a single instance of a particular element. Set will behave closer to an Array but only allows a single instance. This is a more preemptive approach which avoids duplication because of the nature of the container.

hash = {}
hash['a'] = nil
hash['b'] = nil
hash # => {"a"=>nil, "b"=>nil}
hash['a'] = nil
hash # => {"a"=>nil, "b"=>nil}

require 'set'
ary = [].to_set
ary << 'a'
ary << 'b'
ary # => #<Set: {"a", "b"}>
ary << 'a'
ary # => #<Set: {"a", "b"}>

Hash uses name/value pairs, which means the values won't be of any real use, but there seems to be a little bit of extra speed using a Hash, based on some tests.

require 'benchmark'
require 'set'

ALPHABET = ('a' .. 'z').to_a
N = 100_000
Benchmark.bm(5) do |x|
  x.report('Hash') { 
    N.times {
      h = {}
      ALPHABET.each { |i|
        h[i] = nil
      }
    }
  }

  x.report('Array') {
    N.times {
      a = Set.new
      ALPHABET.each { |i|
        a << i
      }
    }
  }
end

Which outputs:

            user     system      total        real
Hash    8.140000   0.130000   8.270000 (  8.279462)
Array  10.680000   0.120000  10.800000 ( 10.813385)

It's possible to save only if the user allow it to be saved just like a download and he must open it manually, the only issue is to suggest a name, my sample code will suggest a name only for Google Chome and only if you use a link instead of button because of the download attribute.

You will only need a base64 encode library and JQuery to easy things.

// This will generate the text file content based on the form data
function buildData(){
  var txtData = "Name: "+$("#nameField").val()+
      "\r\nLast Name: "+$("#lastNameField").val()+
      "\r\nGender: "+($("#genderMale").is(":checked")?"Male":"Female");

  return txtData;
}
// This will be executed when the document is ready
$(function(){
  // This will act when the submit BUTTON is clicked
  $("#formToSave").submit(function(event){
    event.preventDefault();
    var txtData = buildData();
    window.location.href="data:application/octet-stream;base64,"+Base64.encode(txtData);
  });

  // This will act when the submit LINK is clicked
  $("#submitLink").click(function(event){
    var txtData = buildData();
    $(this).attr('download','sugguestedName.txt')
      .attr('href',"data:application/octet-stream;base64,"+Base64.encode(txtData));
  });
});

<!DOCTYPE html>
<html>
    <head><title></title>
    <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.8.3/jquery.min.js"></script>
    <script type="text/javascript" src="base64.js"></script>
    </head>
    <body>
    <form method="post" action="" id="formToSave">
        <dl>
            <dt>Name:</dt>
            <dd><input type="text" id="nameField" value="Sample" /></dd>
            <dt>Last Name:</dt>
            <dd><input type="text" id="lastNameField" value="Last Name" /></dd>
            <dt>Gender:</dt>
            <dd><input type="radio" checked="checked" name="gender" value="M" id="genderMale" />
                Male
                <input type="radio" checked="checked" name="gender" value="F" />
                Female
        </dl>
        <p><a href="javascript://Save as TXT" id="submitLink">Save as TXT</a></p>
        <p><button type="submit"><img src="http://www.suttonrunners.org/images/save_icon.gif" alt=""/> Save as TXT</button></p>
    </form>
    </body>
</html>

Here is your article for doing it with code

private void Form1_Load(object sender, System.EventArgs e)
{
     // Create the ToolTip and associate with the Form container.
     ToolTip toolTip1 = new ToolTip();

     // Set up the delays for the ToolTip.
     toolTip1.AutoPopDelay = 5000;
     toolTip1.InitialDelay = 1000;
     toolTip1.ReshowDelay = 500;
     // Force the ToolTip text to be displayed whether or not the form is active.
     toolTip1.ShowAlways = true;

     // Set up the ToolTip text for the Button and Checkbox.
     toolTip1.SetToolTip(this.button1, "My button1");
     toolTip1.SetToolTip(this.checkBox1, "My checkBox1");
}

You need to tag your image correctly first with your registryhost:

docker tag [OPTIONS] IMAGE[:TAG] [REGISTRYHOST/][USERNAME/]NAME[:TAG]

Then docker push using that same tag.

docker push NAME[:TAG]

Example:

docker tag 518a41981a6a myRegistry.com/myImage
docker push myRegistry.com/myImage

Return the task_id (which is given from .delay()) and ask the celery instance afterwards about the state:

x = method.delay(1,2)
print x.task_id

When asking, get a new AsyncResult using this task_id:

from celery.result import AsyncResult
res = AsyncResult("your-task-id")
res.ready()

[System.Security.Principal.WindowsIdentity]::GetCurrent().Name

If you installed from the DMG on a mac, it created a mysql client but did not put it in your user path.

Add this to your .bash_profile:

export PATH="/usr/local/mysql/bin:$PATH

This will let you run mysql from anywhere as you.

On newer distros (as of 2016), it seems that PIE is enabled by default so you will need to disable it explicitly when compiling.

Here's a little summary of commands which can be helpful when playing locally with buffer overflow exercises in general:

Disable canary:

gcc vuln.c -o vuln_disable_canary -fno-stack-protector

Disable DEP:

gcc vuln.c -o vuln_disable_dep -z execstack

Disable PIE:

gcc vuln.c -o vuln_disable_pie -no-pie

Disable all of protection mechanisms listed above (warning: for local testing only):

gcc vuln.c -o vuln_disable_all -fno-stack-protector -z execstack -no-pie

For 32-bit machines, you'll need to add the -m32 parameter as well.

As mentioned above if you wish to as a new element your queried collection you can use:

    $items = DB::select(DB::raw('SELECT * FROM items WHERE items.id = '.$id.'  ;'));
    foreach($items as $item){
        $product = DB::select(DB::raw(' select * from product
               where product_id = '. $id.';' ));

        $items->push($product);
        // or 
        // $items->put('products', $product);
    }

but if you wish to add new element to each queried element you need to do like:

    $items = DB::select(DB::raw('SELECT * FROM items WHERE items.id = '.$id.'  ;'));
    foreach($items as $item){
           $product = DB::select(DB::raw(' select * from product
                 where product_id = '. $id.';' ));

          $item->add_whatever_element_you_want = $product;
    }

add_whatever_element_you_want can be whatever you wish that your element is named (like product for example).

scp is best for one file.
OR a combination of tar & compression for smaller data sets like source code trees with small resources (ie: images, sqlite etc).

• media folders (40 GB)
• database backups (28 GB)
• mp3 libraries (100 GB)

It becomes impractical to build a zip/tar.gz file to transfer with scp at this point do to the physical limits of the hosted server.

As an exercise, you can do some gymnastics like piping tar into ssh and redirecting the results into a remote file. (saving the need to build a swap or temporary clone aka zip or tar.gz)

However,

rsync simplify's this process and allows you to transfer data without consuming any additional disc space.

Also,

Continuous (cron?) updates use minimal changes vs full cloned copies speed up large data migrations over time.

tl;dr
scp == small scale (with room to build compressed files on the same drive)
rsync == large scale (with the necessity to backup large data and no room left)

I was having issue with connecting to MS SQL 2005 using Windows Authentication. I was able to solve the issue with help from this and other forums. Here is what I did:

1. Install the JTDS driver
2. Do not use the "domain= " property in the jdbc:jtds:://[:][/][;=[;...]] string
3. Install the ntlmauth.dll in c:\windows\system32 directory (registration of the dll was not required) on the web server machine.
4. Change the logon identity for the Apache Tomcat service to a domain User with access to the SQL database server (it was not necessary for the user to have access to the dbo.master).

My environment: Windows XP clinet hosting Apache Tomcat 6 with MS SQL 2005 backend on Windows 2003

You can call tail +[line number] [file] and pipe it to grep -n which shows the line number:

tail +[line number] [file] | grep -n /regex/

The only problem with this method is the line numbers reported by grep -n will be [line number] - 1 less than the actual line number in [file].

You could just pass the connection string to EntityFramework and get on with your life:

public partial class UtilityContext : DbContext
{
    static UtilityContext()
    {
        Database.SetInitializer<UtilityContext>(null);
    }

    public UtilityContext()
        : base("Data Source=SERVER;Initial Catalog=DATABASE;Persist Security Info=True;User ID=USERNAME;Password=PASSWORD;MultipleActiveResultSets=True")
    {
    }

    // DbSet, OnModelCreating, etc...
}

The JPA @Column Annotation

The nullable attribute of the @Column annotation has two purposes:

• it's used by the schema generation tool
• it's used by Hibernate during flushing the Persistence Context

Schema Generation Tool

The HBM2DDL schema generation tool translates the @Column(nullable = false) entity attribute to a NOT NULL constraint for the associated table column when generating the CREATE TABLE statement.

As I explained in the Hibernate User Guide, it's better to use a tool like Flyway instead of relying on the HBM2DDL mechanism for generating the database schema.

Persistence Context Flush

When flushing the Persistence Context, Hibernate ORM also uses the @Column(nullable = false) entity attribute:

new Nullability( session ).checkNullability( values, persister, true );

If the validation fails, Hibernate will throw a PropertyValueException, and prevents the INSERT or UPDATE statement to be executed needesly:

if ( !nullability[i] && value == null ) {
    //check basic level one nullablilty
    throw new PropertyValueException(
            "not-null property references a null or transient value",
            persister.getEntityName(),
            persister.getPropertyNames()[i]
        );    
}

The Bean Validation @NotNull Annotation

The @NotNull annotation is defined by Bean Validation and, just like Hibernate ORM is the most popular JPA implementation, the most popular Bean Validation implementation is the Hibernate Validator framework.

When using Hibernate Validator along with Hibernate ORM, Hibernate Validator will throw a ConstraintViolation when validating the entity.

Doing the same in declarative pipeline syntax, below are few examples:

stage('master-branch-stuff') {
    when {
        branch 'master'
    }
    steps {
        echo 'run this stage - ony if the branch = master branch'
    }
}

stage('feature-branch-stuff') {
    when {
        branch 'feature/*'
    }
    steps {
        echo 'run this stage - only if the branch name started with feature/'
    }
}

stage('expression-branch') {
    when {
        expression {
            return env.BRANCH_NAME != 'master';
        }
    }
    steps {
        echo 'run this stage - when branch is not equal to master'
    }
}

stage('env-specific-stuff') {
    when { 
        environment name: 'NAME', value: 'this' 
    }
    steps {
        echo 'run this stage - only if the env name and value matches'
    }
}

More effective ways coming up - https://issues.jenkins-ci.org/browse/JENKINS-41187
Also look at - https://jenkins.io/doc/book/pipeline/syntax/#when

The directive beforeAgent true can be set to avoid spinning up an agent to run the conditional, if the conditional doesn't require git state to decide whether to run:

when { beforeAgent true; expression { return isStageConfigured(config) } }

Release post and docs

UPDATE
New WHEN Clause
REF: https://jenkins.io/blog/2018/04/09/whats-in-declarative

equals - Compares two values - strings, variables, numbers, booleans - and returns true if they’re equal. I’m honestly not sure how we missed adding this earlier! You can do "not equals" comparisons using the not { equals ... } combination too.

changeRequest - In its simplest form, this will return true if this Pipeline is building a change request, such as a GitHub pull request. You can also do more detailed checks against the change request, allowing you to ask "is this a change request against the master branch?" and much more.

buildingTag - A simple condition that just checks if the Pipeline is running against a tag in SCM, rather than a branch or a specific commit reference.

tag - A more detailed equivalent of buildingTag, allowing you to check against the tag name itself.

You should do the following:

SELECT cr.review_sk, 
       cr.cs_sk, 
       cr.full_name,
       tolist(to_char(cf.fact_date, 'mm/dd/yyyy')) "appt",
       cs.cs_id, 
       cr.tracking_number
from review cr, cs, fact cf
where cr.cs_sk = cs.cs_sk
       and UPPER(cs.cs_id) like '%' || UPPER(i_cs_id) || '%'
       and row_delete_date_time is null
       and cr.review_sk = cf.review_wk (+)
       and cr.fact_type_code (+) = 183050
GROUP BY cr.review_sk, cr.cs_sk, cf.fact_date, cr.tracking_number, cs.cs_id, cr.full_name
ORDER BY cs.cs_id, cr.full_name;

Here's an MSDN article on Vista Gadgets. Some preliminary documentation on 7 gadgets, and changes. I think the only major changes are that Gadgets don't reside in the Sidebar anymore, and as such "dock/undock events" are now backwards-compatibility cludges that really shouldn't be used.

Best way to get started is probably to just tweak an existing gadget. There's an example gadget in the above link, or you could pick a different one out on your own.

Gadgets are written in HTML, CSS, and some IE scripting language (generally Javascript, but I believe VBScript also works). For really fancy things you might need to create an ActiveX object, so C#/C++ for COM could be useful to know.

Gadgets are packaged as ".gadget" files, which are just renamed Zip archives that contain a gadget manifest (gadget.xml) in their top level.

fields() and fieldNames() both were not working for me. And I had to spend quite sometime to find a way to iterate over the keys. There are two ways by which it can be done.

One is by converting it into a map (takes up more space):

ObjectMapper mapper = new ObjectMapper();
Map<String, Object> result = mapper.convertValue(jsonNode, Map.class);
for (String key : result.keySet())
{
    if(key.equals(foo))
    {
        //code here
    }
}

Another, by using a String iterator:

Iterator<String> it = jsonNode.getFieldNames();
while (it.hasNext())
{
    String key = it.next();
    if (key.equals(foo))
    {
         //code here
    }
}

Use serialize and deserialize methods in SerializationUtils from commons-lang.

Kindly ensure, the other columns are not constrained to accept Not null values, hence while creating columns in table just ignore "Not Null" syntax. eg

Create Table Table_Name(
            col1 DataType,
            col2 DataType);

You can then insert multiple row values in any of the columns you want to. For instance:

Insert Into TableName(columnname)
values
      (x),
      (y),
      (z);

and so on…

Hope this helps.

Clustered Index - A clustered index defines the order in which data is physically stored in a table. Table data can be sorted in only way, therefore, there can be only one clustered index per table. In SQL Server, the primary key constraint automatically creates a clustered index on that particular column.

Non-Clustered Index - A non-clustered index doesn’t sort the physical data inside the table. In fact, a non-clustered index is stored at one place and table data is stored in another place. This is similar to a textbook where the book content is located in one place and the index is located in another. This allows for more than one non-clustered index per table.It is important to mention here that inside the table the data will be sorted by a clustered index. However, inside the non-clustered index data is stored in the specified order. The index contains column values on which the index is created and the address of the record that the column value belongs to.When a query is issued against a column on which the index is created, the database will first go to the index and look for the address of the corresponding row in the table. It will then go to that row address and fetch other column values. It is due to this additional step that non-clustered indexes are slower than clustered indexes

Differences between clustered and Non-clustered index

1. There can be only one clustered index per table. However, you can create multiple non-clustered indexes on a single table.
2. Clustered indexes only sort tables. Therefore, they do not consume extra storage. Non-clustered indexes are stored in a separate place from the actual table claiming more storage space.
3. Clustered indexes are faster than non-clustered indexes since they don’t involve any extra lookup step.

For more information refer to this article.

Add cast RemoteWebDriver to driver initialize and you will have the .setLogLevel method:

import java.util.logging.Level;
import org.openqa.selenium.By;
import org.openqa.selenium.WebDriver;
import org.openqa.selenium.chrome.ChromeDriver;
import org.openqa.selenium.remote.RemoteWebDriver;

public class PrintLogTest {
    public static void main(String[] args) {
        System.setProperty("webdriver.chrome.driver", "/Users/.../chromedriver");
        WebDriver driver = new ChromeDriver();

        //here
        ((RemoteWebDriver) driver).setLogLevel(Level.INFO);

        driver.get("https://google.com/");
        driver.findElement(By.name("q")).sendKeys("automation test");
        driver.quit();
    }
}

Example output:

Jun 15, 2020 4:27:04 PM org.openqa.selenium.remote.RemoteWebDriver log
INFO: Executing: get [430aec21a9beb6340a4185c4ea6a693d, get {url=https://google.com/}]
Jun 15, 2020 4:27:06 PM org.openqa.selenium.remote.RemoteWebDriver log
INFO: Executed: [430aec21a9beb6340a4185c4ea6a693d, get {url=https://google.com/}]
Jun 15, 2020 4:27:06 PM org.openqa.selenium.remote.RemoteWebDriver log
INFO: Executing: findElement [430aec21a9beb6340a4185c4ea6a693d, findElement {using=name, value=q}]
Jun 15, 2020 4:27:06 PM org.openqa.selenium.remote.RemoteWebDriver log
INFO: Executed: [430aec21a9beb6340a4185c4ea6a693d, findElement {using=name, value=q}]
...
...

At least I've tried it on ChromeDriver() and FirefoxDriver() and it working fine.

If someone looks for this… I wanted to rsync only specific files and folders and managed to do it with this command: rsync --include-from=rsync-files

With rsync-files:

my-dir/
my-file.txt

- /*

A late answer, yet another definition:

A package is represented by an imported top-entity which could either be a self-contained module, or the __init__.py special module as the top-entity from a set of modules within a sub directory structure.

So physically a package is a distribution unit, which provides one or more modules.

Yes, we can assign variables from child controller to the variables in parent controller. This is one possible way:

Overview: The main aim of the code, below, is to assign child controller's $scope.variable to parent controller's $scope.assign

Explanation: There are two controllers. In the html, notice that the parent controller encloses the child controller. That means the parent controller will be executed before child controller. So, first setValue() will be defined and then the control will go to the child controller. $scope.variable will be assigned as "child". Then this child scope will be passed as an argument to the function of parent controller, where $scope.assign will get the value as "child"

<!DOCTYPE html>
<html>
<script src="https://ajax.googleapis.com/ajax/libs/angularjs/1.6.4/angular.min.js"></script>
<script type="text/javascript">
    var app = angular.module('myApp',[]);

    app.controller('child',function($scope){
        $scope.variable = "child";
        $scope.$parent.setValue($scope);
    });

    app.controller('parent',function($scope){
        $scope.setValue = function(childscope) {
            $scope.assign = childscope.variable;
        }
    });

</script>
<body ng-app="myApp">
 <div ng-controller="parent">
    <p>this is parent: {{assign}}</p>
    <div ng-controller="child">
        <p>this is {{variable}}</p>
    </div>
 </div>
</body>
</html>

For local development you could serve the files with a simple web server.

With Python installed, go into the folder where your project is served, like cd my-project/. And then use python -m SimpleHTTPServer which would make index.html and it's JavaScript files available at localhost:8000.

This is something that may not happen to anyone else, but in my case, this error appeared when I decided to restart my project (to follow a different vue.js tutorial).

The steps that created my problem was:

# move my existing project
mv project-name project-name-old
# create a new project
vue create project-name
# run server
npm run server

The problem was that my previous server was still running on a different terminal tab. On localhost:8080, the page that was still showing was the old project.

All I had to do was shut down the old server in the terminal and execute "npm run serve" again (or view localhost:8081).

Just in case this confounds someone else for half an hour, or for laughs and giggles.

You are dealing with the raw DOM element .. need to wrap it in a jquery object

console.info("cat_id: ",$(value).attr('cat_id'));

I had this problem recently and I figured it was because I had deleted some files that I did not need anymore. The problem is that git does not know that the files have been deleted and it sees that the server still has it. (server = origin)

So I ran

git rm $(git ls-files --deleted)

And then ran a commit and push.

That solved the issue.

Just use the name of that variable.

In JavaScript, variables are only local to a function, if they are the function's parameter(s) or if you declare them as local explicitely by typing the var keyword before the name of the variable.

If the name of the local value has the same name as the global value, use the window object

See this jsfiddle

x = 1;_x000D_
y = 2;_x000D_
z = 3;_x000D_
_x000D_
function a(y) {_x000D_
  // y is local to the function, because it is a function parameter_x000D_
  console.log('local y: should be 10:', y); // local y through function parameter_x000D_
  y = 3; // will only overwrite local y, not 'global' y_x000D_
  console.log('local y: should be 3:', y); // local y_x000D_
  // global value could be accessed by referencing through window object_x000D_
  console.log('global y: should be 2:', window.y) // global y, different from local y ()_x000D_
_x000D_
  var x; // makes x a local variable_x000D_
  x = 4; // only overwrites local x_x000D_
  console.log('local x: should be 4:', x); // local x_x000D_
  _x000D_
  z = 5; // overwrites global z, because there is no local z_x000D_
  console.log('local z: should be 5:', z); // local z, same as global_x000D_
  console.log('global z: should be 5 5:', window.z, z) // global z, same as z, because z is not local_x000D_
}_x000D_
a(10);_x000D_
console.log('global x: should be 1:', x); // global x_x000D_
console.log('global y: should be 2:', y); // global y_x000D_
console.log('global z: should be 5:', z); // global z, overwritten in function a

Edit

With ES2015 there came two more keywords const and let, which also affect the scope of a variable (Language Specification)

about Selenium IDE, I am not an expert but you have to add the line "choose ok on next confirmation" before the event which trigger the alert/confirm dialog box as you can see into this screenshot:

You need to create a file named org.apache.cxf.Logger (that is: org.apache.cxf file with Logger extension) under /META-INF/cxf/ with the following contents:

org.apache.cxf.common.logging.Log4jLogger

Reference: Using Log4j Instead of java.util.logging.

Also if you replace standard:

<cxf:bus>
  <cxf:features>
    <cxf:logging/>
  </cxf:features>
</cxf:bus>

with much more verbose:

<bean id="abstractLoggingInterceptor" abstract="true">
    <property name="prettyLogging" value="true"/>
</bean>
<bean id="loggingInInterceptor" class="org.apache.cxf.interceptor.LoggingInInterceptor" parent="abstractLoggingInterceptor"/>
<bean id="loggingOutInterceptor" class="org.apache.cxf.interceptor.LoggingOutInterceptor" parent="abstractLoggingInterceptor"/>

<cxf:bus>
    <cxf:inInterceptors>
        <ref bean="loggingInInterceptor"/>
    </cxf:inInterceptors>
    <cxf:outInterceptors>
        <ref bean="loggingOutInterceptor"/>
    </cxf:outInterceptors>
    <cxf:outFaultInterceptors>
        <ref bean="loggingOutInterceptor"/>
    </cxf:outFaultInterceptors>
    <cxf:inFaultInterceptors>
        <ref bean="loggingInInterceptor"/>
    </cxf:inFaultInterceptors>
</cxf:bus>

Apache CXF will pretty print XML messages formatting them with proper indentation and line breaks. Very useful. More about it here.

In Swift, using xcode 7 (and later), you can add the following to your AppDelegate.swift file:

UITabBar.appearance().tintColor = UIColor(red: 255/255.0, green: 255/255.0, blue: 255/255.0, alpha: 1.0)

This is the what the complete method looks like:

func application(application: UIApplication, didFinishLaunchingWithOptions launchOptions: [NSObject: AnyObject]?) -> Bool {

    // I added this line
    UITabBar.appearance().tintColor = UIColor(red: 255/255.0, green: 255/255.0, blue: 255/255.0, alpha: 1.0)

    return true
}

In the example above my item will be white. The "/255.0" is needed because it expects a value from 0 to 1. For white, I could have just used 1. But for other color you'll probably be using RGB values.

[day,,month,,year]= Intl.DateTimeFormat(undefined, { year: 'numeric', month: '2-digit', day: '2-digit' }).formatToParts(new Date()),year.value+month.value+day.value

or

new Date().toJSON().slice(0,10).replace(/\/|-/g,'')

$(document).mousedown(function(e) {
    if( e.button == 2 ) {
         e.preventDefault();
        return false;
    } 
});

As others have mentioned, at this moment of writing, Object.assign() requires a polyfill and object spread ... requires some transpiling (and perhaps a polyfill too) in order to work.

Consider this code:

// Babel wont touch this really, it will simply fail if Object.assign() is not supported in browser.
const objAss = { message: 'Hello you!' };
const newObjAss = Object.assign(objAss, { dev: true });
console.log(newObjAss);

// Babel will transpile with use to a helper function that first attempts to use Object.assign() and then falls back.
const objSpread = { message: 'Hello you!' };
const newObjSpread = {...objSpread, dev: true };
console.log(newObjSpread);

These both produce the same output.

Here is the output from Babel, to ES5:

var objAss = { message: 'Hello you!' };
var newObjAss = Object.assign(objAss, { dev: true });
console.log(newObjAss);

var _extends = Object.assign || function (target) { for (var i = 1; i < arguments.length; i++) { var source = arguments[i]; for (var key in source) { if (Object.prototype.hasOwnProperty.call(source, key)) { target[key] = source[key]; } } } return target; };

var objSpread = { message: 'Hello you!' };
var newObjSpread = _extends({}, objSpread, { dev: true });
console.log(newObjSpread);

This is my understanding so far. Object.assign() is actually standardised, where as object spread ... is not yet. The only problem is browser support for the former and in future, the latter too.

Play with the code here

Hope this helps.

If you're using typing (introduced in Python 3.5) you can use typing.Optional, where Optional[X] is equivalent to Union[X, None]. It is used to signal that the explicit value of None is allowed . From typing.Optional:

def foo(arg: Optional[int] = None) -> None:
    ...

Yes , deleteBy method is supported To use it you need to annotate method with @Transactional

In cooperation with Andy E, this is the dark side of the force:

var _old = jQuery.Event.prototype.stopPropagation;

jQuery.Event.prototype.stopPropagation = function() {
    this.target.nodeName !== 'SPAN' && _old.apply( this, arguments );
};     

Example: http://jsfiddle.net/M4teA/2/

Remember, if all the events were bound via jQuery, you can handle those cases just here. In this example, we just call the original .stopPropagation() if we are not dealing with a <span>.

You cannot prevent the prevent, no.

What you could do is, to rewrite those event handlers manually in-code. This is tricky business, but if you know how to access the stored handler methods, you could work around it. I played around with it a little, and this is my result:

$( document.body ).click(function() {
    alert('Hi I am bound to the body!');
});

$( '#bar' ).click(function(e) {
    alert('I am the span and I do prevent propagation');
    e.stopPropagation();
});

$( '#yay' ).click(function() {
    $('span').each(function(i, elem) {
        var events        = jQuery._data(elem).events,
            oldHandler    = [ ],
            $elem         = $( elem );

        if( 'click' in events ) {                        
            [].forEach.call( events.click, function( click ) {
                oldHandler.push( click.handler );
            });

            $elem.off( 'click' );
        }

        if( oldHandler.length ) {
            oldHandler.forEach(function( handler ) {
                $elem.bind( 'click', (function( h ) {
                    return function() {
                        h.apply( this, [{stopPropagation: $.noop}] );
                    };
                }( handler )));
            });
        }
    });

    this.disabled = 1;
    return false;
});

Example: http://jsfiddle.net/M4teA/

Notice, the above code will only work with jQuery 1.7. If those click events were bound with an earlier jQuery version or "inline", you still can use the code but you would need to access the "old handler" differently.

I know I'm assuming a lot of "perfect world" scenario things here, for instance, that those handles explicitly call .stopPropagation() instead of returning false. So it still might be a useless academic example, but I felt to come out with it :-)

edit: hey, return false; will work just fine, the event objects is accessed in the same way.

Or maybe

 background: transparent !important;
 color: #ffffff;

This was a pain, using netBeans IDE 7.2.

1. You need to remember that Netbeans cleans up the Build folder whenever you rebuild, so

2. Add a resource folder to the src folder:

   • (project)
     • src
       • project package folder (contains .java files)
       • resources (whatever name you want)
       • images (optional subfolders)

3. After the clean/build this structure is propogated into the Build folder:
   

   • (project)
     
     • build
       
       • classes
         
         • project package folder (contains generated .class files)
           
         • resources (your resources)
           
         • images (your optional subfolders)
           

To access the resources:

dlabel = new JLabel(new ImageIcon(getClass().getClassLoader().getResource("resources/images/logo.png")));

and:

if (common.readFile(getClass().getResourceAsStream("/resources/allwise.ini"), buf).equals("OK")) {

worked for me. Note that in one case there is a leading "/" and in the other there isn't. So the root of the path to the resources is the "classes" folder within the build folder.

Double click on the executable jar file in the dist folder. The path to the resources still works.

For me what did the trick was running the command

git config auto.crlf false

inside the folder of the project, I wanted it specifically for one project.

That command changed the file in path {project_name}/.git/config (fyi .git is a hidden folder) by adding the lines

[auto]
    crlf = false

at the end of the file. I suppose changing the file does the same trick as well.

If you're using Angular's ng-repeat to populate the table hackel's jquery snippet will not work by placing it in the document load event. You'll need to run the snippet after angular has finished rendering the table.

To trigger an event after ng-repeat has rendered try this directive:

var app = angular.module('myapp', [])
.directive('onFinishRender', function ($timeout) {
return {
    restrict: 'A',
    link: function (scope, element, attr) {
        if (scope.$last === true) {
            $timeout(function () {
                scope.$emit('ngRepeatFinished');
            });
        }
    }
}
});

Complete example in angular: http://jsfiddle.net/ADukg/6880/

I got the directive from here: Use AngularJS just for routing purposes

There are two problems with your xpath - first you need to remove the child selector from after Data like phihag mentioned. Also you forgot to include root in your xpath. Here is what you want to do:

select="/root/DataSet/Data[@Value1='2']/@Value2"

Most likely you should use CopyWebpackPlugin which was mentioned in kevlened answer. Alternativly for some kind of files like .html or .json you can also use raw-loader or json-loader. Install it via npm install -D raw-loader and then what you only need to do is to add another loader to our webpack.config.js file.

Like:

{
    test: /\.html/,
    loader: 'raw'
}

Note: Restart the webpack-dev-server for any config changes to take effect.

And now you can require html files using relative paths, this makes it much easier to move folders around.

template: require('./nav.html')  

Date.parse() isn't a constructor, its a static method.

So, just use

var timeInMillis = Date.parse(s);

instead of

var timeInMillis = new Date.parse(s);

I created this methods, it works for me...

public String GetDay() {
    return String.valueOf(LocalDateTime.now().format(DateTimeFormatter.ofPattern("dd")));
}

public String GetNameOfTheDay() {
    return String.valueOf(LocalDateTime.now().getDayOfWeek());
}

public String GetMonth() {
    return String.valueOf(LocalDateTime.now().format(DateTimeFormatter.ofPattern("MM")));
}

public String GetNameOfTheMonth() {
    return String.valueOf(LocalDateTime.now().getMonth());
}

public String GetYear() {
    return String.valueOf(LocalDateTime.now().format(DateTimeFormatter.ofPattern("yyyy")));
}

public boolean isLeapYear(long year) {
    return Year.isLeap(year);
}

public String GetDate() {
    return GetDay() + "/" + GetMonth() + "/" + GetYear();
}

public String Get12HHour() {
    return String.valueOf(LocalDateTime.now().format(DateTimeFormatter.ofPattern("hh")));
}

public String Get24HHour() {
    return String.valueOf(LocalDateTime.now().getHour());
}

public String GetMinutes() {
    return String.valueOf(LocalDateTime.now().format(DateTimeFormatter.ofPattern("mm")));
}

public String GetSeconds() {
    return String.valueOf(LocalDateTime.now().format(DateTimeFormatter.ofPattern("ss")));
}

public String Get24HTime() {
    return Get24HHour() + ":" + GetMinutes();
}

public String Get24HFullTime() {
    return Get24HHour() + ":" + GetMinutes() + ":" + GetSeconds();
}

public String Get12HTime() {
    return Get12HHour() + ":" + GetMinutes();
}

public String Get12HFullTime() {
    return Get12HHour() + ":" + GetMinutes() + ":" + GetSeconds();
}

Hope this will help.

.flex-container {
  padding: 0;
  margin: 0;
  list-style: none;
  display: flex;
  align-items: center;
  justify-content: center;
}
row {
  width: 100%;
}
.flex-item {
  background: tomato;
  padding: 5px;
  width: 200px;
  height: 150px;
  margin: 10px;
  line-height: 150px;
  color: white;
  font-weight: bold;
  font-size: 3em;
  text-align: center;
}

As extension might contain more or less that three characters the following will test for an extension regardless of the length of it.

Try this:

$allowedExtensions = array( 'mkv', 'mp3', 'flac' );

$temp = explode(".", $_FILES[$file]["name"]);
$extension = strtolower(end($temp));

if( in_array( $extension, $allowedExtensions ) ) { ///

to check for all characters after the last '.'

This answer has nothing to do with the question, but the use of looper and the way people created the handler and looper in ALL the answers here are plain bad practice (some explanations are correct though), I have to post this:

HandlerThread thread = new HandlerThread(threadName);
thread.start();
Looper looper = thread.getLooper();
Handler myHandler = new Handler(looper);

and for a full implementation

Using Java:

private WebDriver driver = new FirefoxDriver();
WebElement element = driver.findElement(By.id("<ElementID>"));//Enter ID for the element. You can use Name, xpath, cssSelector whatever you like
element.sendKeys(Keys.TAB);
element.sendKeys(Keys.ENTER);

Using C#:

private IWebDriver driver = new FirefoxDriver();
IWebElement element = driver.FindElement(By.Name("q"));
element.SendKeys(Keys.Tab);
element.SendKeys(Keys.Enter);

That its the correct code of background size :

<div class="html-mobile-background">
</div>

<style type="text/css">
html {
    /* Whatever you want */
}
.html-mobile-background {
    position: fixed;
    z-index: -1;
    top: 0;
    left: 0;
    width: 100%;
    height: 100%; /* To compensate for mobile browser address bar space */
    background: url(YOUR BACKGROUND URL HERE) no-repeat; 
 center center fixed; 
-webkit-background-size: cover;
-moz-background-size: cover;
-o-background-size: cover;
background-size: cover;
 background-size: 100% 100%
}
</style>

From Developers website:

Often you will want one Fragment to communicate with another, for example to change the content based on a user event. All Fragment-to-Fragment communication is done through the associated Activity. Two Fragments should never communicate directly.

You can communicate among fragments with the help of its Activity. You can communicate among activity and fragment using this approach.

Please check this link also.

Vue allows for you to specify a default prop value and type directly, by making props an object (see: https://vuejs.org/guide/components.html#Prop-Validation):

props: {
  year: {
    default: 2016,
    type: Number
  }
}

If the wrong type is passed then it throws an error and logs it in the console, here's the fiddle:

https://jsfiddle.net/cexbqe2q/

Okay, I said I'd give a bit more detail on my "sealed classes" opinion. I guess one way to show the kind of answer I'm interested in is to give one myself :)

Opinion: Classes should be sealed by default in C#

Reasoning:

There's no doubt that inheritance is powerful. However, it has to be somewhat guided. If someone derives from a base class in a way which is completely unexpected, this can break the assumptions in the base implementation. Consider two methods in the base class, where one calls another - if these methods are both virtual, then that implementation detail has to be documented, otherwise someone could quite reasonably override the second method and expect a call to the first one to work. And of course, as soon as the implementation is documented, it can't be changed... so you lose flexibility.

C# took a step in the right direction (relative to Java) by making methods sealed by default. However, I believe a further step - making classes sealed by default - would have been even better. In particular, it's easy to override methods (or not explicitly seal existing virtual methods which you don't override) so that you end up with unexpected behaviour. This wouldn't actually stop you from doing anything you can currently do - it's just changing a default, not changing the available options. It would be a "safer" default though, just like the default access in C# is always "the most private visibility available at that point."

By making people explicitly state that they wanted people to be able to derive from their classes, we'd be encouraging them to think about it a bit more. It would also help me with my laziness problem - while I know I should be sealing almost all of my classes, I rarely actually remember to do so :(

Counter-argument:

I can see an argument that says that a class which has no virtual methods can be derived from relatively safely without the extra inflexibility and documentation usually required. I'm not sure how to counter this one at the moment, other than to say that I believe the harm of accidentally-unsealed classes is greater than that of accidentally-sealed ones.

That exception means that you are trying to unpack a tuple, but the tuple has too many values with respect to the number of target variables. For example: this work, and prints 1, then 2, then 3

def returnATupleWithThreeValues():
    return (1,2,3)
a,b,c = returnATupleWithThreeValues()
print a
print b
print c

But this raises your error

def returnATupleWithThreeValues():
    return (1,2,3)
a,b = returnATupleWithThreeValues()
print a
print b

raises

Traceback (most recent call last):
  File "c.py", line 3, in ?
    a,b = returnATupleWithThreeValues()
ValueError: too many values to unpack

Now, the reason why this happens in your case, I don't know, but maybe this answer will point you in the right direction.

if(sb.length() > 0){
    sb.deleteCharAt(sb.length() - 1);
}

As you already hinted in your question, your code creates all promises synchronously. Instead they should only be created at the time the preceding one resolves.

Secondly, each promise that is created with new Promise needs to be resolved with a call to resolve (or reject). This should be done when the timer expires. That will trigger any then callback you would have on that promise. And such a then callback (or await) is a necessity in order to implement the chain.

With those ingredients, there are several ways to perform this asynchronous chaining:

1. With a for loop that starts with an immediately resolving promise

2. With Array#reduce that starts with an immediately resolving promise

3. With a function that passes itself as resolution callback

4. With ECMAScript2017's async / await syntax

5. With ECMAScript2020's for await...of syntax

See a snippet and comments for each of these options below.

1. With for

You can use a for loop, but you must make sure it doesn't execute new Promise synchronously. Instead you create an initial immediately resolving promise, and then chain new promises as the previous ones resolve:

for (let i = 0, p = Promise.resolve(); i < 10; i++) {
    p = p.then(_ => new Promise(resolve =>
        setTimeout(function () {
            console.log(i);
            resolve();
        }, Math.random() * 1000)
    ));
}

2. With reduce

This is just a more functional approach to the previous strategy. You create an array with the same length as the chain you want to execute, and start out with an immediately resolving promise:

[...Array(10)].reduce( (p, _, i) => 
    p.then(_ => new Promise(resolve =>
        setTimeout(function () {
            console.log(i);
            resolve();
        }, Math.random() * 1000)
    ))
, Promise.resolve() );

This is probably more useful when you actually have an array with data to be used in the promises.

3. With a function passing itself as resolution-callback

Here we create a function and call it immediately. It creates the first promise synchronously. When it resolves, the function is called again:

(function loop(i) {
    if (i < 10) new Promise((resolve, reject) => {
        setTimeout( () => {
            console.log(i);
            resolve();
        }, Math.random() * 1000);
    }).then(loop.bind(null, i+1));
})(0);

This creates a function named loop, and at the very end of the code you can see it gets called immediately with argument 0. This is the counter, and the i argument. The function will create a new promise if that counter is still below 10, otherwise the chaining stops.

The call to resolve() will trigger the then callback which will call the function again. loop.bind(null, i+1) is just a different way of saying _ => loop(i+1).

4. With async/await

Modern JS engines support this syntax:

(async function loop() {
    for (let i = 0; i < 10; i++) {
        await new Promise(resolve => setTimeout(resolve, Math.random() * 1000));
        console.log(i);
    }
})();

It may look strange, as it seems like the new Promise() calls are executed synchronously, but in reality the async function returns when it executes the first await. Every time an awaited promise resolves, the function's running context is restored, and proceeds after the await, until it encounters the next one, and so it continues until the loop finishes.

As it may be a common thing to return a promise based on a timeout, you could create a separate function for generating such a promise. This is called promisifying a function, in this case setTimeout. It may improve the readability of the code:

const delay = ms => new Promise(resolve => setTimeout(resolve, ms));

(async function loop() {
    for (let i = 0; i < 10; i++) {
        await delay(Math.random() * 1000);
        console.log(i);
    }
})();

5. With for await...of

With EcmaScript 2020, the for await...of found its way to modern JavaScript engines. Although it does not really reduce code in this case, it allows to isolate the definition of the random interval chain from the actual iteration of it:

const delay = ms => new Promise(resolve => setTimeout(resolve, ms));
async function * randomDelays(count ,max) {
    for (let i = 0; i < count; i++) yield delay(Math.random() * max).then(() => i);
}

(async function loop() {
    for await (let i of randomDelays(10, 1000)) console.log(i);
})();

The usage of both can be depended on the structure of your data.

Simply, You can use the Nested Objects approach if you plan to give priority to a unique identifier such as a Primary Key.

eg:

  {
     "Employees" : {
           "001" : {
               "Name" : "Alan",
               "Children" : ["Walker", "Dua", "Lipa"]
                },
           "002" : {
               "Name" : "Ezio",
               "Children" : ["Kenvey", "Connor", "Edward"]
                }
      }

Or, Use the Array first approach if you intend to store a set of values with no need to identify uniquely.

eg:

 [
     {
        "Employees":[
               {
                   "Name" : "Alan",
                   "Children" : ["Walker", "Dua", "Lipa"]
               },
               {
                   "Name" : "Ezio",
                   "Children" : ["Kenvey", "Connor", "Edward"]
               }
          ]
       }
   ]

Although you could use the second method with an identifier, it can be harder or too complex to query and understand in some scenarios. Also depending on the database one may have to apply a suitable approach. Eg: MongoDB / Firebase

For that single rule you have, there isn't any shorter way to do it. The child combinator is the same in CSS and in Sass/SCSS and there's no alternative to it.

However, if you had multiple rules like this:

#foo > ul > li > ul > li > a:nth-child(3n+1) {
    color: red;
}

#foo > ul > li > ul > li > a:nth-child(3n+2) {
    color: green;
}

#foo > ul > li > ul > li > a:nth-child(3n+3) {
    color: blue;
}

You could condense them to one of the following:

/* Sass */
#foo > ul > li > ul > li
    > a:nth-child(3n+1)
        color: red
    > a:nth-child(3n+2)
        color: green
    > a:nth-child(3n+3)
        color: blue

/* SCSS */
#foo > ul > li > ul > li {
    > a:nth-child(3n+1) { color: red; }
    > a:nth-child(3n+2) { color: green; }
    > a:nth-child(3n+3) { color: blue; }
}

Your EditText should be wrapped in a TextInputLayout

<android.support.design.widget.TextInputLayout
    android:layout_width="fill_parent"
    android:layout_height="wrap_content"
    android:id="@+id/tilEmail">

    <EditText
        android:layout_width="fill_parent"
        android:layout_height="wrap_content"
        android:inputType="textEmailAddress"
        android:ems="10"
        android:id="@+id/etEmail"
        android:hint="Email"
        android:layout_marginTop="10dp"
        />

</android.support.design.widget.TextInputLayout>

To get an error message like you wanted, set error to TextInputLayout

TextInputLayout tilEmail = (TextInputLayout) findViewById(R.id.tilEmail);
if (error){
    tilEmail.setError("Invalid email id");    
}

You should add design support library dependency. Add this line in your gradle dependencies

compile 'com.android.support:design:22.2.0'

You can use String.getBytes() which returns the byte[] array.

I would suggest:

DECLARE @sqlStatement nvarchar(MAX),
        @tableName nvarchar(50) = 'TripEvent',
        @columnName nvarchar(50) = 'CreatedDate';

SELECT                  @sqlStatement = 'ALTER TABLE ' + @tableName + ' DROP CONSTRAINT ' + dc.name + ';'
        FROM            sys.default_constraints AS dc
            LEFT JOIN   sys.columns AS sc
                ON      (dc.parent_column_id = sc.column_id)
        WHERE           dc.parent_object_id = OBJECT_ID(@tableName)
        AND         type_desc = 'DEFAULT_CONSTRAINT'
        AND         sc.name = @columnName
PRINT'   ['+@tableName+']:'+@@SERVERNAME+'.'+DB_NAME()+'@'+CONVERT(VarChar, GETDATE(), 127)+';  '+@sqlStatement;
IF(LEN(@sqlStatement)>0)EXEC sp_executesql @sqlStatement

The only solution that works for me (and keeps submodules working) is

git checkout --orphan newBranch
git add -A  # Add all files and commit them
git commit
git branch -D master  # Deletes the master branch
git branch -m master  # Rename the current branch to master
git push -f origin master  # Force push master branch to github
git gc --aggressive --prune=all     # remove the old files

Deleting .git/ always causes huge issues when I have submodules. Using git rebase --root would somehow cause conflicts for me (and take long since I had a lot of history).

Add this code in the activity from where you want to exit from the app on pressing back button:

@Override
public void onBackPressed() {
    super.onBackPressed();
    exitFromApp();
}

private void exitFromApp() {
    Intent intent = new Intent(Intent.ACTION_MAIN);
    intent.addCategory(Intent.CATEGORY_HOME);
    startActivity(intent);
}

Arrays.fill(). The method is overloaded for different data types, and there is even a variation that fills only a specified range of indices.

You want rows where that condition is true so you need a comma:

data[data$Ozone > 14, ]

Hmm it has been a little while but from what I remember...
If you want a custom window you can just make a new frame and make it show up just like you would with the main window. Java also has a great dialog library that you can check out here:

How to Make Dialogs

That may be able to give you the functionality you are looking for with a whole lot less effort.

Object[] possibilities = {"ham", "spam", "yam"};
String s = (String)JOptionPane.showInputDialog(
                    frame,
                    "Complete the sentence:\n"
                    + "\"Green eggs and...\"",
                    "Customized Dialog",
                    JOptionPane.PLAIN_MESSAGE,
                    icon,
                    possibilities,
                    "ham");

//If a string was returned, say so.
if ((s != null) && (s.length() > 0)) {
    setLabel("Green eggs and... " + s + "!");
    return;
}

//If you're here, the return value was null/empty.
setLabel("Come on, finish the sentence!");

If you do not care to limit the user's choices, you can either use a form of the showInputDialog method that takes fewer arguments or specify null for the array of objects. In the Java look and feel, substituting null for possibilities results in a dialog that has a text field and looks like this:

I meet this error too when I run a wordpress on my Fedora system.

I googled it, and find a way to fix this.

Maybe this will help you too.

1. check mysql config : my.cnf

    cat /etc/my.cnf | grep tmpdir
   

   I can't see anything in my my.cnf

2. add tmpdir=/tmp to my.cnf under [mysqld]

3. restart web/app and mysql server

   /etc/init.d/mysqld restart

Use to_datetime, there is no need for a format string the parser is man/woman enough to handle it:

In [51]:
pd.to_datetime(df['I_DATE'])

Out[51]:
0   2012-03-28 14:15:00
1   2012-03-28 14:17:28
2   2012-03-28 14:50:50
Name: I_DATE, dtype: datetime64[ns]

To access the date/day/time component use the dt accessor:

In [54]:
df['I_DATE'].dt.date

Out[54]:
0    2012-03-28
1    2012-03-28
2    2012-03-28
dtype: object

In [56]:    
df['I_DATE'].dt.time

Out[56]:
0    14:15:00
1    14:17:28
2    14:50:50
dtype: object

You can use strings to filter as an example:

In [59]:
df = pd.DataFrame({'date':pd.date_range(start = dt.datetime(2015,1,1), end = dt.datetime.now())})
df[(df['date'] > '2015-02-04') & (df['date'] < '2015-02-10')]

Out[59]:
         date
35 2015-02-05
36 2015-02-06
37 2015-02-07
38 2015-02-08
39 2015-02-09

PHP strings can be specified not just in two ways, but in four ways.

1. Single quoted strings will display things almost completely "as is." Variables and most escape sequences will not be interpreted. The exception is that to display a literal single quote, you can escape it with a back slash \', and to display a back slash, you can escape it with another backslash \\ (So yes, even single quoted strings are parsed).
2. Double quote strings will display a host of escaped characters (including some regexes), and variables in the strings will be evaluated. An important point here is that you can use curly braces to isolate the name of the variable you want evaluated. For example let's say you have the variable $type and you want to echo "The $types are". That will look for the variable $types. To get around this use echo "The {$type}s are" You can put the left brace before or after the dollar sign. Take a look at string parsing to see how to use array variables and such.
3. Heredoc string syntax works like double quoted strings. It starts with <<<. After this operator, an identifier is provided, then a newline. The string itself follows, and then the same identifier again to close the quotation. You don't need to escape quotes in this syntax.
4. Nowdoc (since PHP 5.3.0) string syntax works essentially like single quoted strings. The difference is that not even single quotes or backslashes have to be escaped. A nowdoc is identified with the same <<< sequence used for heredocs, but the identifier which follows is enclosed in single quotes, e.g. <<<'EOT'. No parsing is done in nowdoc.

Notes: Single quotes inside of single quotes and double quotes inside of double quotes must be escaped:

$string = 'He said "What\'s up?"';
$string = "He said \"What's up?\"";

Speed:
I would not put too much weight on single quotes being faster than double quotes. They probably are faster in certain situations. Here's an article explaining one manner in which single and double quotes are essentially equally fast since PHP 4.3 (Useless Optimizations toward the bottom, section C). Also, this benchmarks page has a single vs double quote comparison. Most of the comparisons are the same. There is one comparison where double quotes are slower than single quotes.

Try this, it’ll sort the list in-place in descending order (there’s no need to specify a key in this case):

Process

listB = [24, 13, -15, -36, 8, 22, 48, 25, 46, -9]
listC = sorted(listB, reverse=True) # listB remains untouched
print listC

output:

 [48, 46, 25, 24, 22, 13, 8, -9, -15, -36]

With UpdateData  As
(
SELECT RS_NOM,
ROW_NUMBER() OVER (ORDER BY [RS_NOM] DESC) AS RN
FROM DESTINATAIRE_TEMP
)
UPDATE DESTINATAIRE_TEMP SET CODE_DEST = RN
FROM DESTINATAIRE_TEMP
INNER JOIN UpdateData ON DESTINATAIRE_TEMP.RS_NOM = UpdateData.RS_NOM

ALTER TABLE `MY_TABLE` ADD COLUMN `STAGE` INTEGER UNSIGNED NOT NULL AFTER `PREV_COLUMN`;

Sub CheckValues1()
    Dim rwIndex As Integer
    Dim colIndex As Integer
    For rwIndex = 1 To 10
            For colIndex = 1 To 5
                If Cells(rwIndex, colIndex).Value <> 0 Then _
                    Cells(rwIndex, colIndex).Value = 0
            Next colIndex
    Next rwIndex
End Sub

Found this snippet on http://www.java2s.com/Code/VBA-Excel-Access-Word/Excel/Checksvaluesinarange10rowsby5columns.htm It seems to be quite useful as a function to illustrate the means to check values in cells in an ordered fashion.

Just imagine it as being a 2d Array of sorts and apply the same logic to loop through cells.

This is worked for me, anyone can try it

$("#myModal").on("hidden.bs.modal", function () {
    for (instance in CKEDITOR.instances)
        CKEDITOR.instances[instance].destroy();
    $('#myModal .modal-body').html('');    
});

you can open ckEditor in Modal window

I have no idea why the other answers didn't work for me (error 500) but this works

@GetMapping("")
public String getAll() {
    List<Entity> entityList = entityManager.findAll();
    List<JSONObject> entities = new ArrayList<JSONObject>();
    for (Entity n : entityList) {
        JSONObject Entity = new JSONObject();
        entity.put("id", n.getId());
        entity.put("address", n.getAddress());
        entities.add(entity);
    }
    return entities.toString();
}

If you have a lot of variables to convert in optional, you can use SubimeText with this:

Find: \${([A-Za-z_0-9]*)}
Replace: \$\{${1}!\}

Be sure regex and case-sensitive options are enabled:

This may help if someone still has this question unresolved.

(function() {_x000D_
  $('button').on('click', function() {_x000D_
    $("#action").html("button was clicked");_x000D_
    console.log("the button was clicked");_x000D_
  });_x000D_
})();

.btn-clear {_x000D_
  background-color: transparent !important;_x000D_
  border-style: none !important;_x000D_
  cursor: pointer;_x000D_
}_x000D_
_x000D_
.btn-clear:active,_x000D_
.btn-clear:focus {_x000D_
  outline-style: none !important;_x000D_
  outline-color: transparent;_x000D_
}

<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js"></script>_x000D_
<!-- this button has default style -->_x000D_
<button>Action</button>_x000D_
<!-- this button is clear of style -->_x000D_
<button class="btn-clear">Action</button>_x000D_
_x000D_
<label id="action"></label>

In your Project Directory there is a folder called "android" and inside it there is the local.properties file . Delete the file and the build should run successfully

control-shift-L should open the log(s) for you. this will by default be the messages log, but if you create the item that is creating the error the Compiler Log will show up (for me the box shows up in the bottom middle left).

if the messages log is the only log that shows up, simply re-execute the item that was causing the failure and the compiler log will show up

for instance, hit Control-shift-L then execute this

CREATE OR REPLACE FUNCTION TEST123() IS
BEGIN
VAR := 2;
end TEST123;

and you will see the message "Error(1,18): PLS-00103: Encountered the symbol ")" when expecting one of the following: current delete exists prior "

(You can also see this in "View--Log")

One more thing, if you are having a problem with a (function || package || procedure) if you do the coding via the SQL Developer interface (by finding the object in question on the connections tab and editing it the error will be immediately displayed (and even underlined at times)

For Spring 4, using Spring Boot we can have the following example without using the anti-pattern of getting the Bean from the ApplicationContext directly:

package com.yourproject;

@SpringBootApplication
public class TestBed implements CommandLineRunner {

    private MyService myService;

    @Autowired
    public TestBed(MyService myService){
        this.myService = myService;
    }

    public static void main(String... args) {
        SpringApplication.run(TestBed.class, args);
    }

    @Override
    public void run(String... strings) throws Exception {
        System.out.println("myService: " + MyService );
    }

}

@Service 
public class MyService{
    public String getSomething() {
        return "something";
    }
}

Make sure that all your injected services are under com.yourproject or its subpackages.

Download the tarball, transfer it to your FreeBSD machine and extract it, afterwards run python setup.py install and you're done!

EDIT: Just to add on that, you can also install the tarballs with pip now.

<li class="nav-item">
    <a class="nav-link text-dark" asp-area="" asp-page="/UsersPage">Users</a>
</li>

Try this

#include "header.h"

int estimatedPopulation (int currentPopulation, float growthRate)
{
    return currentPopulation + currentPopulation * growthRate  / 100;
}

var inValid = new RegExp('^[_A-z0-9]{1,}$');
var value = "test string";
var k = inValid.test(value);
alert(k);

if you just run the main.py under the app, just import like

from mymodule import myclass

if you want to call main.py on other folder, use:

from .mymodule import myclass

for example:

+-- app
¦   +-- __init__.py
¦   +-- main.py
¦   +-- mymodule.py
+-- __init__.py
+-- run.py

main.py

from .mymodule import myclass

run.py

from app import main
print(main.myclass)

So I think the main question of you is how to call app.main.

If you are using Fish shell, you can leverage the string functions:

git branch -d (git branch -l "<your pattern>" | string trim)

This is not much different from the Powershell options in some of the other answers.

I created my own functions which work really nicely:

def writeDict(dict, filename, sep):
    with open(filename, "a") as f:
        for i in dict.keys():            
            f.write(i + " " + sep.join([str(x) for x in dict[i]]) + "\n")

It will store the keyname first, followed by all values. Note that in this case my dict contains integers so that's why it converts to int. This is most likely the part you need to change for your situation.

def readDict(filename, sep):
    with open(filename, "r") as f:
        dict = {}
        for line in f:
            values = line.split(sep)
            dict[values[0]] = {int(x) for x in values[1:len(values)]}
        return(dict)

Further to meteore's answer, I found the code

df.index = df.index.astype('i8')

doesn't work for me. So I put my code here for the convenience of others stuck with this issue.

city_cluster_df = pd.read_csv(text_filepath, encoding='utf-8')
# the field 'city_en' is a string, when converted to Numpy array, it will be an object
city_cluster_arr = city_cluster_df[['city_en','lat','lon','cluster','cluster_filtered']].to_records()
descr=city_cluster_arr.dtype.descr
# change the field 'city_en' to string type (the index for 'city_en' here is 1 because before the field is the row index of dataframe)
descr[1]=(descr[1][0], "S20")
newArr=city_cluster_arr.astype(np.dtype(descr))

i get the solution. i've using cygwin and this is the problem the rsync command for Windows work only in windows shell and works in the windows powershell.

A few times it has happened the same error between two linux boxes. and appears to be by incompatible versions of rsync

Above answer's holds good.

Just an add-on for anyone who is into async-await rather than promise !!

const findAllFoo = async (req, resp, next) => {
    const pageSize = 10;
    const currentPage = 1;

    try {
        const foos = await FooModel.find() // find all documents
            .skip(pageSize * (currentPage - 1)) // we will not retrieve all records, but will skip first 'n' records
            .limit(pageSize); // will limit/restrict the number of records to display

        const numberOfFoos = await FooModel.countDocuments(); // count the number of records for that model

        resp.setHeader('max-records', numberOfFoos);
        resp.status(200).json(foos);

    } catch (err) {
        resp.status(500).json({
            message: err
        });
    }
};

If you are using Toolbar try below code:

toolbar.setTitle("");

Well, note that the request contains binary data, so I'm not posting the request as such - instead, I've converted every non-printable-ascii character into a dot (".").

POST /cgi-bin/qtest HTTP/1.1
Host: aram
User-Agent: Mozilla/5.0 Gecko/2009042316 Firefox/3.0.10
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us,en;q=0.5
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
Referer: http://aram/~martind/banner.htm
Content-Type: multipart/form-data; boundary=2a8ae6ad-f4ad-4d9a-a92c-6d217011fe0f
Content-Length: 514

--2a8ae6ad-f4ad-4d9a-a92c-6d217011fe0f
Content-Disposition: form-data; name="datafile1"; filename="r.gif"
Content-Type: image/gif

GIF87a.............,...........D..;
--2a8ae6ad-f4ad-4d9a-a92c-6d217011fe0f
Content-Disposition: form-data; name="datafile2"; filename="g.gif"
Content-Type: image/gif

GIF87a.............,...........D..;
--2a8ae6ad-f4ad-4d9a-a92c-6d217011fe0f
Content-Disposition: form-data; name="datafile3"; filename="b.gif"
Content-Type: image/gif

GIF87a.............,...........D..;
--2a8ae6ad-f4ad-4d9a-a92c-6d217011fe0f--

Note that every line (including the last one) is terminated by a \r\n sequence.

Above answers gave good solutions using Javscript. Here is a simple jQuery solution:

$('#iframeId').contents().find('div')

The trick here is jQuery's .contents() method, unlike .children() which can only get HTML elements, .contents() can get both text nodes and HTML elements. That's why one can get document contents of an iframe by using it.

Further reading about jQuery .contents(): .contents()

Note that the iframe and page have to be on the same domain.

I was facing the same problem, not it works fine.

1. just open cmd

2. cd to the directory where your netbeans setup file is located.

3. in cmd, write the name of the entire setup file and write --javahome "address of jdk"

4. hit enter, it will surely solve your problem

for example, if the setup file is: netbeans8.02.exe

and path of JDK is C:/program files/java/jdk9.01

then run the command,

netbeans8.02.exe --javahome "C:/program files/java/jdk9.01"

and hit enter! :-)

std::copy (b.begin(), b.end(), std::back_inserter(a));

This can be used in case the items in vector a have no assignment operator (e.g. const member).

In all other cases this solution is ineffiecent compared to the above insert solution.

Go to Preference->Editor->General and choose show quick doc on mouse hover

It is possible. Have a look at JSch.addIdentity(...)

This allows you to use key either as byte array or to read it from file.

import com.jcraft.jsch.Channel;
import com.jcraft.jsch.ChannelSftp;
import com.jcraft.jsch.JSch;
import com.jcraft.jsch.Session;

public class UserAuthPubKey {
    public static void main(String[] arg) {
        try {
            JSch jsch = new JSch();

            String user = "tjill";
            String host = "192.18.0.246";
            int port = 10022;
            String privateKey = ".ssh/id_rsa";

            jsch.addIdentity(privateKey);
            System.out.println("identity added ");

            Session session = jsch.getSession(user, host, port);
            System.out.println("session created.");

            // disabling StrictHostKeyChecking may help to make connection but makes it insecure
            // see http://stackoverflow.com/questions/30178936/jsch-sftp-security-with-session-setconfigstricthostkeychecking-no
            // 
            // java.util.Properties config = new java.util.Properties();
            // config.put("StrictHostKeyChecking", "no");
            // session.setConfig(config);

            session.connect();
            System.out.println("session connected.....");

            Channel channel = session.openChannel("sftp");
            channel.setInputStream(System.in);
            channel.setOutputStream(System.out);
            channel.connect();
            System.out.println("shell channel connected....");

            ChannelSftp c = (ChannelSftp) channel;

            String fileName = "test.txt";
            c.put(fileName, "./in/");
            c.exit();
            System.out.println("done");

        } catch (Exception e) {
            System.err.println(e);
        }
    }
}

I had same problem with an Apple Sample Code. In project "PhotoPicker", in Architectures, the base SDK was:

This parametrization provokes the message:

CodeSign error: code signing is required for product type 'Application' in SDK 'iOS 7.1'

It assumes you have a developer user, so... use it and change:

And the error disappears.

Simple answer: You can't. An array is fixed size in Java. You'll want to use a List<String>.

Alternatively, you could create an array of fixed size and put things in it:

String[] array = new String[2];
array[0] = "Hello";
array[1] = "World!";

This was introduced in v3.1.0: http://getbootstrap.com/css/#grid-example-fluid

Commit #62736046 added ".container-fluid variation for full-width containers and layouts".

Unfortunately, it is not possible to "get" the height of an element via CSS because CSS is not a language that returns any sort of data other than rules for the browser to adjust its styling.

Your resolution can be achieved with jQuery, or alternatively, you can fake it with CSS3's transform:translateY(); rule.

The CSS Route

If we assume that your target div in this instance is 200px high - this would mean that you want the div to have a margin of 190px?

This can be achieved by using the following CSS:

.dynamic-height {
    -webkit-transform: translateY(100%); //if your div is 200px, this will move it down by 200px, if it is 100px it will down by 100px etc
    transform: translateY(100%);         //if your div is 200px, this will move it down by 200px, if it is 100px it will down by 100px etc
    margin-top: -10px;
}

In this instance, it is important to remember that translateY(100%) will move the element in question downwards by a total of it's own length.

The problem with this route is that it will not push element below it out of the way, where a margin would.

The jQuery Route

If faking it isn't going to work for you, then your next best bet would be to implement a jQuery script to add the correct CSS for you.

jQuery(document).ready(function($){ //wait for the document to load
    $('.dynamic-height').each(function(){ //loop through each element with the .dynamic-height class
        $(this).css({
            'margin-top' : $(this).outerHeight() - 10 + 'px' //adjust the css rule for margin-top to equal the element height - 10px and add the measurement unit "px" for valid CSS
        });
    });
});

is it possible to export without looping through all records

For a range in Excel with a large number of rows you may see some performance improvement if you create an Access.Application object in Excel and then use it to import the Excel data into Access. The code below is in a VBA module in the same Excel document that contains the following test data

Option Explicit

Sub AccImport()
    Dim acc As New Access.Application
    acc.OpenCurrentDatabase "C:\Users\Public\Database1.accdb"
    acc.DoCmd.TransferSpreadsheet _
            TransferType:=acImport, _
            SpreadSheetType:=acSpreadsheetTypeExcel12Xml, _
            TableName:="tblExcelImport", _
            Filename:=Application.ActiveWorkbook.FullName, _
            HasFieldNames:=True, _
            Range:="Folio_Data_original$A1:B10"
    acc.CloseCurrentDatabase
    acc.Quit
    Set acc = Nothing
End Sub

If you look at the side bar of your question, you will see many related questions...

In your context, the simpler method might be to install a PDF print driver like PDFCreator and just print the page to this output.

I want to extend MattMitchell's answer by saying you can create an extension method for this functionality:

public static IsEmptyOrWhitespace(this string value) {
    return String.IsEmptyOrWhitespace(value);
}

This makes it possible to call:

string strValue;
if (strValue.IsEmptyOrWhitespace())
     // do stuff

To me this is a lot cleaner than calling the static String function, while still being NullReference safe!

For better browser compatibility you can rely on a regular expression. This will work in all web browsers released in the last 20 years:

String.prototype.equalsci = function(s) {
    var regexp = RegExp("^"+this.replace(/[.\\+*?\[\^\]$(){}=!<>|:-]/g, "\\$&")+"$", "i");
    return regexp.test(s);
}

"PERSON@Ü.EXAMPLE.COM".equalsci("person@ü.example.com")// returns true

This is different from the other answers found here because it takes into account that not all users are using modern web browsers.

Note: If you need to support unusual cases like the Turkish language you will need to use localeCompare because i and I are not the same letter in Turkish.

"I".localeCompare("i", undefined, { sensitivity:"accent"})===0// returns true
"I".localeCompare("i", "tr", { sensitivity:"accent"})===0// returns false

Or you can use this:

^(?:part[12]|(part)1,\12)$

In my specific case of the same issue, it was caused by not having the Powershell script saved with an encoding of Windows-1252 or UFT-8 WITH BOM.

I had the same problem - "R" missing. And none of the advices given here helped. Fortunately, I've found the reason - somehow Eclipse got lost the Project-Properties-target. It was unset. I don't know till now, what had done it, but setting it back helped. So, attention - missing R can mean the missing target, too!

Using Node.js

sync mode:

var fs = require("fs");
var text = fs.readFileSync("./mytext.txt");
var textByLine = text.split("\n")

async mode:

var fs = require("fs");
fs.readFile("./mytext.txt", function(text){
    var textByLine = text.split("\n")
});

UPDATE

As of at least Node 6, readFileSync returns a Buffer, so it must first be converted to a string in order for split to work:

var text = fs.readFileSync("./mytext.txt").toString('utf-8');

Or

var text = fs.readFileSync("./mytext.txt", "utf-8");

The error means that you're navigating to a view whose model is declared as typeof Foo (by using @model Foo), but you actually passed it a model which is typeof Bar (note the term dictionary is used because a model is passed to the view via a ViewDataDictionary).

The error can be caused by

Passing the wrong model from a controller method to a view (or partial view)

Common examples include using a query that creates an anonymous object (or collection of anonymous objects) and passing it to the view

var model = db.Foos.Select(x => new
{
    ID = x.ID,
    Name = x.Name
};
return View(model); // passes an anonymous object to a view declared with @model Foo

or passing a collection of objects to a view that expect a single object

var model = db.Foos.Where(x => x.ID == id);
return View(model); // passes IEnumerable<Foo> to a view declared with @model Foo

The error can be easily identified at compile time by explicitly declaring the model type in the controller to match the model in the view rather than using var.

Passing the wrong model from a view to a partial view

Given the following model

public class Foo
{
    public Bar MyBar { get; set; }
}

and a main view declared with @model Foo and a partial view declared with @model Bar, then

Foo model = db.Foos.Where(x => x.ID == id).Include(x => x.Bar).FirstOrDefault();
return View(model);

will return the correct model to the main view. However the exception will be thrown if the view includes

@Html.Partial("_Bar") // or @{ Html.RenderPartial("_Bar"); }

By default, the model passed to the partial view is the model declared in the main view and you need to use

@Html.Partial("_Bar", Model.MyBar) // or @{ Html.RenderPartial("_Bar", Model.MyBar); }

to pass the instance of Bar to the partial view. Note also that if the value of MyBar is null (has not been initialized), then by default Foo will be passed to the partial, in which case, it needs to be

@Html.Partial("_Bar", new Bar())

Declaring a model in a layout

If a layout file includes a model declaration, then all views that use that layout must declare the same model, or a model that derives from that model.

If you want to include the html for a separate model in a Layout, then in the Layout, use @Html.Action(...) to call a [ChildActionOnly] method initializes that model and returns a partial view for it.

Correct or Incorrect: Please execute test locally and decide for yourself!

Edit/Remove is faster in LinkedList than ArrayList.

ArrayList, backed by Array, which needs to be double the size, is worse in large volume application.

Below is the unit test result for each operation.Timing is given in Nanoseconds.

Operation                       ArrayList                      LinkedList  

AddAll   (Insert)               101,16719                      2623,29291 

Add      (Insert-Sequentially)  152,46840                      966,62216

Add      (insert-randomly)      36527                          29193

remove   (Delete)               20,56,9095                     20,45,4904

contains (Search)               186,15,704                     189,64,981

Here's the code:

import org.junit.Assert;
import org.junit.Test;

import java.util.*;

public class ArrayListVsLinkedList {
    private static final int MAX = 500000;
    String[] strings = maxArray();

    ////////////// ADD ALL ////////////////////////////////////////
    @Test
    public void arrayListAddAll() {
        Watch watch = new Watch();
        List<String> stringList = Arrays.asList(strings);
        List<String> arrayList = new ArrayList<String>(MAX);

        watch.start();
        arrayList.addAll(stringList);
        watch.totalTime("Array List addAll() = ");//101,16719 Nanoseconds
    }

    @Test
    public void linkedListAddAll() throws Exception {
        Watch watch = new Watch();
        List<String> stringList = Arrays.asList(strings);

        watch.start();
        List<String> linkedList = new LinkedList<String>();
        linkedList.addAll(stringList);
        watch.totalTime("Linked List addAll() = ");  //2623,29291 Nanoseconds
    }

    //Note: ArrayList is 26 time faster here than LinkedList for addAll()

    ///////////////// INSERT /////////////////////////////////////////////
    @Test
    public void arrayListAdd() {
        Watch watch = new Watch();
        List<String> arrayList = new ArrayList<String>(MAX);

        watch.start();
        for (String string : strings)
            arrayList.add(string);
        watch.totalTime("Array List add() = ");//152,46840 Nanoseconds
    }

    @Test
    public void linkedListAdd() {
        Watch watch = new Watch();

        List<String> linkedList = new LinkedList<String>();
        watch.start();
        for (String string : strings)
            linkedList.add(string);
        watch.totalTime("Linked List add() = ");  //966,62216 Nanoseconds
    }

    //Note: ArrayList is 9 times faster than LinkedList for add sequentially

    /////////////////// INSERT IN BETWEEN ///////////////////////////////////////

    @Test
    public void arrayListInsertOne() {
        Watch watch = new Watch();
        List<String> stringList = Arrays.asList(strings);
        List<String> arrayList = new ArrayList<String>(MAX + MAX / 10);
        arrayList.addAll(stringList);

        String insertString0 = getString(true, MAX / 2 + 10);
        String insertString1 = getString(true, MAX / 2 + 20);
        String insertString2 = getString(true, MAX / 2 + 30);
        String insertString3 = getString(true, MAX / 2 + 40);

        watch.start();

        arrayList.add(insertString0);
        arrayList.add(insertString1);
        arrayList.add(insertString2);
        arrayList.add(insertString3);

        watch.totalTime("Array List add() = ");//36527
    }

    @Test
    public void linkedListInsertOne() {
        Watch watch = new Watch();
        List<String> stringList = Arrays.asList(strings);
        List<String> linkedList = new LinkedList<String>();
        linkedList.addAll(stringList);

        String insertString0 = getString(true, MAX / 2 + 10);
        String insertString1 = getString(true, MAX / 2 + 20);
        String insertString2 = getString(true, MAX / 2 + 30);
        String insertString3 = getString(true, MAX / 2 + 40);

        watch.start();

        linkedList.add(insertString0);
        linkedList.add(insertString1);
        linkedList.add(insertString2);
        linkedList.add(insertString3);

        watch.totalTime("Linked List add = ");//29193
    }


    //Note: LinkedList is 3000 nanosecond faster than ArrayList for insert randomly.

    ////////////////// DELETE //////////////////////////////////////////////////////
    @Test
    public void arrayListRemove() throws Exception {
        Watch watch = new Watch();
        List<String> stringList = Arrays.asList(strings);
        List<String> arrayList = new ArrayList<String>(MAX);

        arrayList.addAll(stringList);
        String searchString0 = getString(true, MAX / 2 + 10);
        String searchString1 = getString(true, MAX / 2 + 20);

        watch.start();
        arrayList.remove(searchString0);
        arrayList.remove(searchString1);
        watch.totalTime("Array List remove() = ");//20,56,9095 Nanoseconds
    }

    @Test
    public void linkedListRemove() throws Exception {
        Watch watch = new Watch();
        List<String> linkedList = new LinkedList<String>();
        linkedList.addAll(Arrays.asList(strings));

        String searchString0 = getString(true, MAX / 2 + 10);
        String searchString1 = getString(true, MAX / 2 + 20);

        watch.start();
        linkedList.remove(searchString0);
        linkedList.remove(searchString1);
        watch.totalTime("Linked List remove = ");//20,45,4904 Nanoseconds
    }

    //Note: LinkedList is 10 millisecond faster than ArrayList while removing item.

    ///////////////////// SEARCH ///////////////////////////////////////////
    @Test
    public void arrayListSearch() throws Exception {
        Watch watch = new Watch();
        List<String> stringList = Arrays.asList(strings);
        List<String> arrayList = new ArrayList<String>(MAX);

        arrayList.addAll(stringList);
        String searchString0 = getString(true, MAX / 2 + 10);
        String searchString1 = getString(true, MAX / 2 + 20);

        watch.start();
        arrayList.contains(searchString0);
        arrayList.contains(searchString1);
        watch.totalTime("Array List addAll() time = ");//186,15,704
    }

    @Test
    public void linkedListSearch() throws Exception {
        Watch watch = new Watch();
        List<String> linkedList = new LinkedList<String>();
        linkedList.addAll(Arrays.asList(strings));

        String searchString0 = getString(true, MAX / 2 + 10);
        String searchString1 = getString(true, MAX / 2 + 20);

        watch.start();
        linkedList.contains(searchString0);
        linkedList.contains(searchString1);
        watch.totalTime("Linked List addAll() time = ");//189,64,981
    }

    //Note: Linked List is 500 Milliseconds faster than ArrayList

    class Watch {
        private long startTime;
        private long endTime;

        public void start() {
            startTime = System.nanoTime();
        }

        private void stop() {
            endTime = System.nanoTime();
        }

        public void totalTime(String s) {
            stop();
            System.out.println(s + (endTime - startTime));
        }
    }


    private String[] maxArray() {
        String[] strings = new String[MAX];
        Boolean result = Boolean.TRUE;
        for (int i = 0; i < MAX; i++) {
            strings[i] = getString(result, i);
            result = !result;
        }
        return strings;
    }

    private String getString(Boolean result, int i) {
        return String.valueOf(result) + i + String.valueOf(!result);
    }
}

I've tried most of these solutions, and eventually found (IMO) the best, modern, solution:

CSS grids

With CSS grids, you can define a 'grid', and you can finally create a nice, javascript-free, cross-browser solution for a table with a fixed header, and scrollable content. The header height can even dynamic.

CSS: Display as grid, and set the number of template-rows:

.grid {
    display: grid;
    grid-template-rows: 50px auto; // For fixed height header
    grid-template-rows: auto auto; // For dynamic height header
}

HTML: Create a grid container and the number of defined rows:

<div class="grid">
    <div></div>
    <div></div>
</div>

Here is working example:

CSS

body {
  margin: 0px;
  padding: 0px;
  text-align: center;
}

.table {
  width: 100%;
  height: 100%;
  display: grid;
  grid-template-rows: 50px auto;
}
.table-heading {
  background-color: #ddd;
}
.table-content {
  overflow-x: hidden;
  overflow-y: scroll;
}

HTML

<html>
    <head>
    </head>
    <body>
        <div class="table">
            <div class="table-heading">
                HEADING
            </div>
            <div class="table-content">
                CONTENT - CONTENT - CONTENT <br/>
                CONTENT - CONTENT - CONTENT <br/>
                CONTENT - CONTENT - CONTENT <br/>
                CONTENT - CONTENT - CONTENT <br/>
                CONTENT - CONTENT - CONTENT <br/>
                CONTENT - CONTENT - CONTENT <br/>
            </div>
        </div>
    </body>
</html>

Two things you can do:

git checkout -b sillyname
git commit -am "silly message"
git checkout - 

or

git stash -u
git branch sillyname stash@{0}

(git checkout - <-- the dash is a shortcut for the previous branch you were on )

(git stash -u <-- the -u means that it also takes unstaged changes )

There's a couple of ways to go about converting the first char of a string to upper case.

The first way is to create a method that simply caps the first char and appends the rest of the string using a substring:

public string UppercaseFirst(string s)
    {
        return char.ToUpper(s[0]) + s.Substring(1);
    }

The second way (which is slightly faster) is to split the string into a char array and then re-build the string:

public string UppercaseFirst(string s)
    {
        char[] a = s.ToCharArray();
        a[0] = char.ToUpper(a[0]);
        return new string(a);
    }

I think it's better..

package main

import "fmt"

func main() {
    str := "abc"
    mySlice := []byte(str)
    fmt.Printf("%v -> '%s'",mySlice,mySlice )
}

Check here: http://play.golang.org/p/vpnAWHZZk7

A tool to use here is awk:

cat file | awk 'BEGIN{ found=0} /TERMINATE/{found=1}  {if (found) print }'

How does this work:

1. We set the variable 'found' to zero, evaluating false
2. if a match for 'TERMINATE' is found with the regular expression, we set it to one.
3. If our 'found' variable evaluates to True, print :)

The other solutions might consume a lot of memory if you use them on very large files.

import re
re.sub('<.*?>', '', string)
"i think mabe 124 + but I don't have a big experience it just how I see it in my eyes fun stuff"

The re.sub function takes a regular expresion and replace all the matches in the string with the second parameter. In this case, we are searching for all tags ('<.*?>') and replacing them with nothing ('').

The ? is used in re for non-greedy searches.

More about the re module.

use this code to solve the issue

app.get('/', function(req, res){
    res.render("index");
});

If all your divs start with editDialog as you stated, then you can use the following selector:

$("div[id^='editDialog']")

Or you could use a class selector instead if it's easier for you

<div id="editDialog-0" class="editDialog">...</div>

$(".editDialog")

sometimes those other directives in the content tag can mess up Apple's best guess/heuristic at how to layout your page, all you need to disable pinch zoom is.

<meta name="viewport" content="user-scalable=no" />

private void alarmEventInsert(DriveDetail driveDetail, String vehicleRegNo, int organizationId) {

    final String ALARM_EVENT_INS_SQL = "INSERT INTO alarm_event (event_code,param1,param2,org_id,created_time) VALUES (?,?,?,?,?)";
    CachedConnection conn = JDatabaseManager.getConnection();
    PreparedStatement ps = null;
    ResultSet generatedKeys = null;
    try {
        ps = conn.prepareStatement(ALARM_EVENT_INS_SQL, ps.RETURN_GENERATED_KEYS);
        ps.setInt(1, driveDetail.getEventCode());
        ps.setString(2, vehicleRegNo);
        ps.setString(3, null);
        ps.setInt(4, organizationId);
        ps.setString(5, driveDetail.getCreateTime());
        ps.execute();
        generatedKeys = ps.getGeneratedKeys();
        if (generatedKeys.next()) {
            driveDetail.setStopDuration(generatedKeys.getInt(1));
        }
    } catch (SQLException e) {
        e.printStackTrace();
        logger.error("Error inserting into alarm_event : {}", e
                .getMessage());
        logger.info(ps.toString());
    } finally {
        if (ps != null) {
            try {

                if (ps != null)
                    ps.close();
            } catch (SQLException e) {
                logger.error("Error closing prepared statements : {}", e
                        .getMessage());
            }
        }
    }
    JDatabaseManager.freeConnection(conn);
}

In this state:

The thread is reading and processing rows for a SELECT statement, and sending data to the client.

Because operations occurring during this this state tend to perform large amounts of disk access (reads).

That's why it takes more time to complete and so is the longest-running state over the lifetime of a given query.

Let's say in Swift 4 you have a button set up for a segue as an IBAction like this @IBAction func nextLevel(_ sender: UIButton) {} and you have other actions occurring within your app (i.e. a timer, gamePlay, etc.). Rather than disabling the segue button, you might want to give your user the option to use that segue while the other actions are still occurring and WITHOUT CRASHING THE APP. Here's how:

var appMode = 0

@IBAction func mySegue(_ sender: UIButton) {

    if appMode == 1 {  // avoid crash if button pressed during other app actions and/or conditions
        let conflictingAction = sender as UIButton
        conflictingAction.isEnabled = false
    }
}

Please note that you will likely have other conditions within if appMode == 0 and/or if appMode == 1 that will still occur and NOT conflict with the mySegue button. Thus, AVOIDING A CRASH.

Any tag with runat=server is added as server control in Page and any html content between is handled as LiteralControls which are also added to Page controls collection.

Addition to what Albert has already said:

This code (a mashup of various samples) provides the ability to have a SaveAs dialog box

Function getFileName() As String
    Dim fDialog    As Object
    Set fDialog = Application.FileDialog(msoFileDialogSaveAs)
    Dim varFile As Variant

    With fDialog
       .AllowMultiSelect = False
       .Title = "Select File Location to Export XLSx :"
       .InitialFileName = "jeffatwood.xlsx"

    If .Show = True Then
       For Each varFile In .SelectedItems
         getFileName = varFile
       Next
    End If
End With
End Function

Here is another simple way of doing this, by adding width 20% to every col-xs-2:

<div class="col-xs-12">
     <div class="col-xs-2" style="width:20%;" id="p1">One</div>
     <div class="col-xs-2" style="width:20%;" id="p2">Two</div>
     <div class="col-xs-2" style="width:20%;" id="p3">Three</div>
     <div class="col-xs-2" style="width:20%;" id="p4">Four</div>
     <div class="col-xs-2" style="width:20%;" id="p5">Five</div>
</div>

In simple, Normalisation is Reduction of Redundancies.
Examples of Redundancies:
a) white spaces outside of the root/document tags(...<document></document>...)
b) white spaces within start tag (<...>) and end tag (</...>)
c) white spaces between attributes and their values (ie. spaces between key name and =")
d) superfluous namespace declarations
e) line breaks/white spaces in texts of attributes and tags
f) comments etc...

There is a very handy function in R edit

new_optim <- edit(optim)

It will open the source code of optim using the editor specified in R's options, and then you can edit it and assign the modified function to new_optim. I like this function very much to view code or to debug the code, e.g, print some messages or variables or even assign them to a global variables for further investigation (of course you can use debug).

If you just want to view the source code and don't want the annoying long source code printed on your console, you can use

invisible(edit(optim))

Clearly, this cannot be used to view C/C++ or Fortran source code.

BTW, edit can open other objects like list, matrix, etc, which then shows the data structure with attributes as well. Function de can be used to open an excel like editor (if GUI supports it) to modify matrix or data frame and return the new one. This is handy sometimes, but should be avoided in usual case, especially when you matrix is big.

BigInteger is immutable, you need to do this,

  BigInteger sum = test.add(new BigInteger(30));  
  System.out.println(sum);

function _formatDatetime(date: Date, format: string) {
   const _padStart = (value: number): string => value.toString().padStart(2, '0');
return format
    .replace(/yyyy/g, _padStart(date.getFullYear()))
    .replace(/dd/g, _padStart(date.getDate()))
    .replace(/mm/g, _padStart(date.getMonth() + 1))
    .replace(/hh/g, _padStart(date.getHours()))
    .replace(/ii/g, _padStart(date.getMinutes()))
    .replace(/ss/g, _padStart(date.getSeconds()));
}
function isValidDate(d: Date): boolean {
    return !isNaN(d.getTime());
}
export function formatDate(date: any): string {
    var datetime = new Date(date);
    return isValidDate(datetime) ? _formatDatetime(datetime, 'yyyy-mm-dd hh:ii:ss') : '';
}

only you need to have one parameter in xml file

android:paddingLeft="20dp"

To add on to the answers above, here is a code sample

struct Test
{
    int something;
}
struct NullableTest
{
    int something;
}
class Example
{
    public void Demo()
    {
        Test t = new Test();
        t = null;

        NullableTest? t2 = new NullableTest();
        t2 = null;
    }
}

This would give a compilation error:

Error 12 Cannot convert null to 'Test' because it is a non-nullable value type

Notice that there is no compilation error for NullableTest. (note the ? in the declaration of t2)

It also can be achieved in a little safer way using String.valueOf() like so

Spinner sp = (Spinner) findViewById(R.id.sp_id);
String selectedText = String.valueOf(sp.getSelectedItem());

without crashing the app when all hell breaks loose. The reason behind its safeness is having the capability of dealing with null objects as the argument. The documentation says

if the argument is null, then a string equal to "null"; otherwise, the value of obj.toString() is returned.

So, some insurance there in case of having an empty Spinner for example, which the currently selected item has to be converted to String.

There is no character encoded for use as a pause symbol, though various characters or combinations of characters may look more or less like a pause symbol, depending on font.

In a discussion in the public Unicode mailing list in 2005, a suggestion was made to use two copies of the U+275A HEAVY VERTICAL BAR character: ??. But the adequacy of the result depends on font; for example, the glyph might have been designed so that the bars are too much apart. – The list discussion explains why a pause symbol had not been encoded, and this has not changed.

Thus, the best option is to use an image. If you need to use the symbol in text, it is best to create it in a suitably large size (say 60 by 60 pixels) and scale it down to text size with CSS (e.g., setting height: 0.8em on the img element).

To suppress serializing properties with null values using Jackson >2.0, you can configure the ObjectMapper directly, or make use of the @JsonInclude annotation:

mapper.setSerializationInclusion(Include.NON_NULL);

or:

@JsonInclude(Include.NON_NULL)
class Foo
{
  String bar;
}

Alternatively, you could use @JsonInclude in a getter so that the attribute would be shown if the value is not null.

A more complete example is available in my answer to How to prevent null values inside a Map and null fields inside a bean from getting serialized through Jackson.

For me, this error was happening on localhost, but it disappeared when routing it through ngrok and was replaced with a MUCH more helpful error (net::ERR_INCOMPLETE_CHUNKED_ENCODING) that led me here:

https://stackoverflow.com/a/29969400

Basically, the Kestrel server I was using was saying it was chunked output, but not terminating it properly. I double checked it with Fiddler which confirmed the error.

$('body').find('*').contents().filter(function () { return this.nodeType === 3; });

First, check whether the table exists or not. Accordingly, create table if doesn't exist.

var commandStr= "If not exists (select name from sysobjects where name = 'Customer') CREATE TABLE Customer(First_Name char(50),Last_Name char(50),Address char(50),City char(50),Country char(25),Birth_Date datetime)";

using (SqlCommand command = new SqlCommand(commandStr, con))
command.ExecuteNonQuery();

White space is important, expr expects its operands and operators as separate arguments. You also have to capture the output. Like this:

COUNT=$(expr $FIRSTV - $SECONDV)

but it's more common to use the builtin arithmetic expansion:

COUNT=$((FIRSTV - SECONDV))

Sorry, much late to the party, but I'll add here that if you wanted to capture processes with names identical to your search string, you could do

pgrep -x PROCESS_NAME

-x          Require an exact match of the process name, or argument list if -f is given.
             The default is to match any substring.

This is extremely useful if your original process created child processes (possibly zombie when you query) which prefix the original process' name in their own name and you are trying to exclude them from your results. There are many UNIX daemons which do this. My go-to example is ninja-dev-sync.

I used Intent to let Broadcast Receiver know about Handler instance of main Activity thread and used Message to pass a message to Main activity

I have used such mechanism to check if Broadcast Receiver is already registered or not. Sometimes it is needed when you register your Broadcast Receiver dynamically and do not want to make it twice or you present to the user if Broadcast Receiver is running.

Main activity:

public class Example extends Activity {

private BroadCastReceiver_example br_exemple;

final Messenger mMessenger = new Messenger(new IncomingHandler());

private boolean running = false;

static class IncomingHandler extends Handler {
    @Override
    public void handleMessage(Message msg) {
        running = false;    
        switch (msg.what) {
        case BroadCastReceiver_example.ALIVE:
    running = true;
            ....
            break;
        default:

            super.handleMessage(msg);
        }

    }
    }

@Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);

    IntentFilter filter = new IntentFilter();
        filter.addAction("pl.example.CHECK_RECEIVER");

        br_exemple = new BroadCastReceiver_example();
        getApplicationContext().registerReceiver(br_exemple , filter); //register the Receiver
    }

// call it whenever you want to check if Broadcast Receiver is running.

private void check_broadcastRunning() {    
        /**
        * checkBroadcastHandler - the handler will start runnable which will check if Broadcast Receiver is running
        */
        Handler checkBroadcastHandler = null;

        /**
        * checkBroadcastRunnable - the runnable which will check if Broadcast Receiver is running
        */
        Runnable checkBroadcastRunnable = null;

        Intent checkBroadCastState = new Intent();
        checkBroadCastState .setAction("pl.example.CHECK_RECEIVER");
        checkBroadCastState .putExtra("mainView", mMessenger);
        this.sendBroadcast(checkBroadCastState );
        Log.d(TAG,"check if broadcast is running");

        checkBroadcastHandler = new Handler();
        checkBroadcastRunnable = new Runnable(){    

            public void run(){
                if (running == true) {
                    Log.d(TAG,"broadcast is running");
                }
                else {
                    Log.d(TAG,"broadcast is not running");
                }
            }
        };
        checkBroadcastHandler.postDelayed(checkBroadcastRunnable,100);
        return;
    }

.............
}

Broadcast Receiver:

public class BroadCastReceiver_example extends BroadcastReceiver {


public static final int ALIVE = 1;
@Override
public void onReceive(Context context, Intent intent) {
    // TODO Auto-generated method stub
    Bundle extras = intent.getExtras();
    String action = intent.getAction();
    if (action.equals("pl.example.CHECK_RECEIVER")) {
        Log.d(TAG, "Received broadcast live checker");
        Messenger mainAppMessanger = (Messenger) extras.get("mainView");
        try {
            mainAppMessanger.send(Message.obtain(null, ALIVE));
        } catch (RemoteException e) {
            // TODO Auto-generated catch block
            e.printStackTrace();
        }
    }
    .........

}

}

See on the Wikipedia article on bootstrapping.

There is a section and links explaining what it means in Computing. It has four different uses in the field.

Here are some quotes, but for a more in depth explanation, and alternative meanings, consult the links above.

"...is a technique by which a simple computer program activates a more complicated system of programs."

"A different use of the term bootstrapping is to use a compiler to compile itself, by first writing a small part of a compiler of a new programming language in an existing language to compile more programs of the new compiler written in the new language."

I think sometimes stupid mistakes can give us this error.

<div id="#main"> <--- id with hashtag
    <div id="mainActivity" v-component="{{currentActivity}}" class="activity"></div>
</div>

To

<div id="main"> <--- id without hashtag
    <div id="mainActivity" v-component="{{currentActivity}}" class="activity"></div>
</div>

Well, if yo don't know where is my.cnf (such Mac OS X installed with homebrew), or You are looking found others choices:

ps aux|grep mysql
abkrim            1160   0.0  0.2  2913068  26224   ??  R    Tue04PM   0:14.63 /usr/local/opt/mariadb/bin/mysqld --basedir=/usr/local/opt/mariadb --datadir=/usr/local/var/mysql --plugin-dir=/usr/local/opt/mariadb/lib/plugin --bind-address=127.0.0.1 --log-error=/usr/local/var/mysql/iMac-2.local.err --pid-file=iMac-2.local.pid

You get datadir=/usr/local/var/mysql

The MessageBox in the Extended WPF Toolkit is very nice. It's at Microsoft.Windows.Controls.MessageBox after referencing the toolkit DLL. Of course this was released Aug 9 2011 so it would not have been an option for you originally. It can be found at Github for everyone out there looking around.

You need to add query.addEntity(SwitcherServiceSource.class) before calling the .list() on query.

If you are using jQuery and you want to add content to the existing contents of the div, you can use .html() within the brackets:

$("#log").html($('#log').html() + " <br>New content!");

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<div id="log">Initial Content</div>

Those classes are common extension points for Java UI designs. First off, realize that they don't necessarily have much to do with each other directly, so trying to find a relationship between them might be counterproductive.

JApplet - A base class that let's you write code that will run within the context of a browser, like for an interactive web page. This is cool and all but it brings limitations which is the price for it playing nice in the real world. Normally JApplet is used when you want to have your own UI in a web page. I've always wondered why people don't take advantage of applets to store state for a session so no database or cookies are needed.

JComponent - A base class for objects which intend to interact with Swing.

JFrame - Used to represent the stuff a window should have. This includes borders (resizeable y/n?), titlebar (App name or other message), controls (minimize/maximize allowed?), and event handlers for various system events like 'window close' (permit app to exit yet?).

JPanel - Generic class used to gather other elements together. This is more important with working with the visual layout or one of the provided layout managers e.g. gridbaglayout, etc. For example, you have a textbox that is bigger then the area you have reserved. Put the textbox in a scrolling pane and put that pane into a JPanel. Then when you place the JPanel, it will be more manageable in terms of layout.

Feel free to use my library, available here.

It let's you create header View for any RecyclerView that uses LinearLayoutManager or GridLayoutManager with just a simple method call.

The only difference I see is that getJSON performs a GET request instead of a POST.

I had the same problem but I replaced the following line in my header:

@interface MyController : UIViewTableViewController <UITableViewDelegate, UITableViewDataSource>

with this line and it works as expected:

@interface RequestViewController : UIViewController <UITableViewDelegate, UITableViewDataSource>

Notice the UIViewController. Good luck :)

The ordering will always depend on the specific map implementation. Using Java 8 you can use either of these:

map.forEach((k,v) -> { System.out.println(k + ":" + v); });

Or:

map.entrySet().forEach((e) -> {
            System.out.println(e.getKey() + " : " + e.getValue());
        });

The result will be the same (same order). The entrySet backed by the map so you are getting the same order. The second one is handy as it allows you to use lambdas, e.g. if you want only to print only Integer objects that are greater than 5:

map.entrySet()
    .stream()
    .filter(e-> e.getValue() > 5)
    .forEach(System.out::println);

The code below shows iteration through LinkedHashMap and normal HashMap (example). You will see difference in the order:

public class HMIteration {


    public static void main(String[] args) {
        Map<Object, Object> linkedHashMap = new LinkedHashMap<>();
        Map<Object, Object> hashMap = new HashMap<>();

        for (int i=10; i>=0; i--) {
            linkedHashMap.put(i, i);
            hashMap.put(i, i);
        }

        System.out.println("LinkedHashMap (1): ");
        linkedHashMap.forEach((k,v) -> { System.out.print(k + " (#="+k.hashCode() + "):" + v + ", "); });

        System.out.println("\nLinkedHashMap (2): ");

        linkedHashMap.entrySet().forEach((e) -> {
            System.out.print(e.getKey() + " : " + e.getValue() + ", ");
        });


        System.out.println("\n\nHashMap (1): ");
        hashMap.forEach((k,v) -> { System.out.print(k + " (#:"+k.hashCode() + "):" + v + ", "); });

        System.out.println("\nHashMap (2): ");

        hashMap.entrySet().forEach((e) -> {
            System.out.print(e.getKey() + " : " + e.getValue() + ", ");
        });
    }
}

Output:

LinkedHashMap (1):
10 (#=10):10, 9 (#=9):9, 8 (#=8):8, 7 (#=7):7, 6 (#=6):6, 5 (#=5):5, 4 (#=4):4, 3 (#=3):3, 2 (#=2):2, 1 (#=1):1, 0 (#=0):0,
LinkedHashMap (2):
10 : 10, 9 : 9, 8 : 8, 7 : 7, 6 : 6, 5 : 5, 4 : 4, 3 : 3, 2 : 2, 1 : 1, 0 : 0,
HashMap (1):
0 (#:0):0, 1 (#:1):1, 2 (#:2):2, 3 (#:3):3, 4 (#:4):4, 5 (#:5):5, 6 (#:6):6, 7 (#:7):7, 8 (#:8):8, 9 (#:9):9, 10 (#:10):10,
HashMap (2):
0 : 0, 1 : 1, 2 : 2, 3 : 3, 4 : 4, 5 : 5, 6 : 6, 7 : 7, 8 : 8, 9 : 9, 10 : 10,

If you still don't know, you can get back the original object by:

alert($("#deviceTypeRoot")[0] == $("#deviceTypeRoot")[0]); //True
alert($("#deviceTypeRoot")[0] === $("#deviceTypeRoot")[0]);//True

because $("#deviceTypeRoot") also returns an array of objects which the selector has selected.

You don't need to use "display: table". The reason your margin: 0 auto centering attempt doesn't work is because you didn't specify a width.

This will work just fine:

.wrap {
    background: #aaa;
    margin: 0 auto;
    width: some width in pixels since it's the container;
}

You don't need to specify display: block since that div will be block by default. You can also probably lose the overflow: hidden.

With method chaining:

product = (
    df1.assign(key=1)
    .merge(df2.assign(key=1), on="key")
    .drop("key", axis=1)
)

The best approach would be to map a unique ID to each enum type, thus avoiding the pitfalls of ORDINAL and STRING. See this post which outlines 5 ways you can map an enum.

Taken from the link above:

1&2. Using @Enumerated

There are currently 2 ways you can map enums within your JPA entities using the @Enumerated annotation. Unfortunately both EnumType.STRING and EnumType.ORDINAL have their limitations.

If you use EnumType.String then renaming one of your enum types will cause your enum value to be out of sync with the values saved in the database. If you use EnumType.ORDINAL then deleting or reordering the types within your enum will cause the values saved in the database to map to the wrong enums types.

Both of these options are fragile. If the enum is modified without performing a database migration, you could jeopodise the integrity of your data.

3. Lifecycle Callbacks

A possible solution would to use the JPA lifecycle call back annotations, @PrePersist and @PostLoad. This feels quite ugly as you will now have two variables in your entity. One mapping the value stored in the database, and the other, the actual enum.

4. Mapping unique ID to each enum type

The preferred solution is to map your enum to a fixed value, or ID, defined within the enum. Mapping to predefined, fixed value makes your code more robust. Any modification to the order of the enums types, or the refactoring of the names, will not cause any adverse effects.

5. Using Java EE7 @Convert

If you are using JPA 2.1 you have the option to use the new @Convert annotation. This requires the creation of a converter class, annotated with @Converter, inside which you would define what values are saved into the database for each enum type. Within your entity you would then annotate your enum with @Convert.

My preference: (Number 4)

The reason why I prefer to define my ID's within the enum as oppose to using a converter, is good encapsulation. Only the enum type should know of its ID, and only the entity should know about how it maps the enum to the database.

See the original post for the code example.

It didn't. Your compiler did, but there's still a debug symbol for the original variable name.

In my case, I created a new ChildComponent in Parentcomponent whereas both in the same module but Parent is registered in a shared module so I created ChildComponent using CLI which registered Child in the current module but my parent was registered in the shared module.

So register the ChildComponent in Shared Module manually.

For CentOS, RHEL, Amazon Linux: sudo yum install jq

I was asking myself the same question, and I found no clear answers, so I created a simple test.

I tried to add 100 rows with duplicate primary keys and measured the time needed to process it. I am using SQL Server 2014 Developer and Entity Framework 6.1.3 with a custom repository.

Dim newE As New Employee With {.Name = "e"}
For index = 1 To 100
  Dim e = employees.Select(Function(item) item.Name = "e").FirstOrDefault()
  If e Is Nothing Then
    employees.Insert(newE)
  End If
Next  

2.1 seconds

Dim newE As New Employee With {.Name = "e"}
For index = 1 To 100
  Try
    employees.Insert(newE)
  Catch ex As Exception
  End Try
Next  

3.1 seconds

Double.MAX_VALUE is the maximum value a double can represent (somewhere around 1.7*10^308).

This should end in some calculation problems, if you try to subtract the maximum possible value of a data type.

Even though when you are dealing with money you should never use floating point values especially while rounding this can cause problems (you will either have to much or less money in your system then).

As of Python 3.2 2.7, there is now argparse for processing command line arguments.

You might be able to get a list of classes that are loaded through the classloader but this would not include classes you haven't loaded yet but are on your classpath.

To get ALL classes on your classpath you have to do something like your second solution. If you really want classes that are currently "Loaded" (in other words, classes you have already referenced, accessed or instantiated) then you should refine your question to indicate this.