Programs & Examples On #Synedit

One is an array of arrays, and one is a 2d array. The former can be jagged, the latter is uniform.

That is, a double[][] can validly be:

double[][] x = new double[5][];

x[0] = new double[10];
x[1] = new double[5];
x[2] = new double[3];
x[3] = new double[100];
x[4] = new double[1];

Because each entry in the array is a reference to an array of double. With a jagged array, you can do an assignment to an array like you want in your second example:

x[0] = new double[13];

On the second item, because it is a uniform 2d array, you can't assign a 1d array to a row or column, because you must index both the row and column, which gets you down to a single double:

double[,] ServicePoint = new double[10,9];

ServicePoint[0]... // <-- meaningless, a 2d array can't use just one index.

UPDATE:

To clarify based on your question, the reason your #1 had a syntax error is because you had this:

double[][] ServicePoint = new double[10][9];

And you can't specify the second index at the time of construction. The key is that ServicePoint is not a 2d array, but an 1d array (of arrays) and thus since you are creating a 1d array (of arrays), you specify only one index:

double[][] ServicePoint = new double[10][];

Then, when you create each item in the array, each of those are also arrays, so then you can specify their dimensions (which can be different, hence the term jagged array):

ServicePoint[0] = new double[13];
ServicePoint[1] = new double[20];

Hope that helps!

This is my way of checking for line crossing and where the intersection occurs. Lets use x1 through x4 and y1 through y4

Segment1 = {(X1, Y1), (X2, Y2)}
Segment2 = {(X3, Y3), (X4, Y4)}

Then we need some vectors to represent them

dx1 = X2 - X1
dx2 = X4 - X4
dy1 = Y2 - Y1
dy2 = Y4 - Y3

Now we look at the determinant

det = dx1 * dy2 - dx2 * dy1

If the determinant is 0.0, then the line segments are parallel. This could mean they overlap. If they overlap just at endpoints, then there is one intersection solution. Otherwise there will be infinite solutions. With infinitely many solutions, what do say is your point of intersection? So it's an interesting special case. If you know ahead of time that the lines can't overlap then you can just check if det == 0.0 and if so just say they don't intersect and be done. Otherwise, lets continue on

dx3 = X3 - X1
dy3 = Y3 - Y1

det1 = dx1 * dy3 - dx3 * dy1
det2 = dx2 * dy3 - dx3 * dy2

Now, if det, det1 and det2 are all zero, then your lines are co-linear and could overlap. If det is zero but either det1 or det2 are not, then they are not co-linear, but are parallel, so there is no intersection. So what's left now if det is zero is a 1D problem instead of 2D. We will need to check one of two ways, depending if dx1 is zero or not (so we can avoid division by zero). If dx1 is zero then just do the same logic with y values rather than x below.

s = X3 / dx1
t = X4 / dx1

This computes two scalers, such that if we scale the vector (dx1, dy1) by s we get point (x3, y3), and by t we get (x4, y4). So if either s or t is between 0.0 and 1.0, then point 3 or 4 lies on our first line. Negative would mean the point is behind the start of our vector, while > 1.0 means it is further ahead of the end of our vector. 0.0 means it is at (x1, y1) and 1.0 means it is at (x2, y2). If both s and t are < 0.0 or both are > 1.0, then they don't intersect. And that handles the parallel lines special case.

Now, if det != 0.0 then

s = det1 / det
t = det2 / det
if (s < 0.0 || s > 1.0 || t < 0.0 || t > 1.0)
    return false  // no intersect

This is similar to what we were doing above really. Now if we pass the above test, then our line segments intersect, and we can calculate the intersection quite easily like so:

Ix = X1 + t * dx1
Iy = Y1 + t * dy1

If you want to dig deeper into what the math is doing, look into Cramer's Rule.

Why not create a viewmodel with a simple string parameter and then pass that to the view? It has the benefit of being extensible (i.e. you can then add any other things you may want to set in your controller) and it's fairly simple.

public class MyViewModel
{
    public string YourString { get; set; }
}

In the view

@model MyViewModel
@Html.Label(model => model.YourString)

In the controller

public ActionResult Index() 
{
     myViewModel = new MyViewModel();
     myViewModel.YourString = "However you are setting this."
     return View(myViewModel)
}

This is to get the second class into multiple classes using into a element

var class_name = $('#videobuttonChange').attr('class').split(' ')[1];

Please select the same in the outer select. You can't access the alias name in the same query.

SELECT *, (CASE
        WHEN articleNumber < 2 THEN 'Ama'
        WHEN articleNumber < 5 THEN 'SemiAma' 
        WHEN articleNumber < 7 THEN 'Good'  
        WHEN articleNumber < 9 THEN 'Better' 
        WHEN articleNumber < 12 THEN 'Best'
        ELSE 'Outstanding'
        END) AS ranking 
FROM(
    SELECT registrationDate, (SELECT COUNT(*) FROM Articles WHERE Articles.userId = Users.userId) as articleNumber, 
    hobbies, etc...
    FROM USERS
)x

Use which(mydata_2$height_chad1 == 2585)

Short example

df <- data.frame(x = c(1,1,2,3,4,5,6,3),
                 y = c(5,4,6,7,8,3,2,4))
df
  x y
1 1 5
2 1 4
3 2 6
4 3 7
5 4 8
6 5 3
7 6 2
8 3 4

which(df$x == 3)
[1] 4 8

length(which(df$x == 3))
[1] 2

count(df, vars = "x")
  x freq
1 1    2
2 2    1
3 3    2
4 4    1
5 5    1
6 6    1

df[which(df$x == 3),]
  x y
4 3 7
8 3 4

As Matt Weller pointed out, you can use the length function. The count function in plyr can be used to return the count of each unique column value.

You might take a look at JavaScience's source for OpenSSLKey

There's code in there that does exactly what you want to do.

In fact, they have a lot of crypto source code available here.

Source code snippet:

//------- Parses binary ans.1 RSA private key; returns RSACryptoServiceProvider  ---
public static RSACryptoServiceProvider DecodeRSAPrivateKey(byte[] privkey)
{
        byte[] MODULUS, E, D, P, Q, DP, DQ, IQ ;

        // ---------  Set up stream to decode the asn.1 encoded RSA private key  ------
        MemoryStream  mem = new MemoryStream(privkey) ;
        BinaryReader binr = new BinaryReader(mem) ;    //wrap Memory Stream with BinaryReader for easy reading
        byte bt = 0;
        ushort twobytes = 0;
        int elems = 0;
        try {
                twobytes = binr.ReadUInt16();
                if (twobytes == 0x8130) //data read as little endian order (actual data order for Sequence is 30 81)
                        binr.ReadByte();        //advance 1 byte
                else if (twobytes == 0x8230)
                        binr.ReadInt16();       //advance 2 bytes
                else
                        return null;

                twobytes = binr.ReadUInt16();
                if (twobytes != 0x0102) //version number
                        return null;
                bt = binr.ReadByte();
                if (bt !=0x00)
                        return null;


                //------  all private key components are Integer sequences ----
                elems = GetIntegerSize(binr);
                MODULUS = binr.ReadBytes(elems);

                elems = GetIntegerSize(binr);
                E = binr.ReadBytes(elems) ;

                elems = GetIntegerSize(binr);
                D = binr.ReadBytes(elems) ;

                elems = GetIntegerSize(binr);
                P = binr.ReadBytes(elems) ;

                elems = GetIntegerSize(binr);
                Q = binr.ReadBytes(elems) ;

                elems = GetIntegerSize(binr);
                DP = binr.ReadBytes(elems) ;

                elems = GetIntegerSize(binr);
                DQ = binr.ReadBytes(elems) ;

                elems = GetIntegerSize(binr);
                IQ = binr.ReadBytes(elems) ;

                Console.WriteLine("showing components ..");
                if (verbose) {
                        showBytes("\nModulus", MODULUS) ;
                        showBytes("\nExponent", E);
                        showBytes("\nD", D);
                        showBytes("\nP", P);
                        showBytes("\nQ", Q);
                        showBytes("\nDP", DP);
                        showBytes("\nDQ", DQ);
                        showBytes("\nIQ", IQ);
                }

                // ------- create RSACryptoServiceProvider instance and initialize with public key -----
                RSACryptoServiceProvider RSA = new RSACryptoServiceProvider();
                RSAParameters RSAparams = new RSAParameters();
                RSAparams.Modulus =MODULUS;
                RSAparams.Exponent = E;
                RSAparams.D = D;
                RSAparams.P = P;
                RSAparams.Q = Q;
                RSAparams.DP = DP;
                RSAparams.DQ = DQ;
                RSAparams.InverseQ = IQ;
                RSA.ImportParameters(RSAparams);
                return RSA;
        }
        catch (Exception) {
                return null;
        }
        finally {
                binr.Close();
        }
}

I hope this can be helpful. :)

I. Declaring vars, functions inside IIFE(Immediately-invoked function expression), those can be used only in the anonymous function. (It can be good to use "let, const" keywords without using 'var' when you need to change code for ES6.)

let Name = (function() {
  const _privateHello = function() {
  }
  class Name {
    constructor() {
    }
    publicMethod() {
      _privateHello()
    }
  }
  return Name;
})();

II. WeakMap object can be good for memoryleak trouble.

Stored variables in the WeakMap will be removed when the instance will be removed. Check this article. (Managing the private data of ES6 classes)

let Name = (function() {
  const _privateName = new WeakMap();
})();

III. Let's put all together.

let Name = (function() {
  const _privateName = new WeakMap();
  const _privateHello = function(fullName) {
    console.log("Hello, " + fullName);
  }

  class Name {
    constructor(firstName, lastName) {
      _privateName.set(this, {firstName: firstName, lastName: lastName});
    }
    static printName(name) {
      let privateName = _privateName.get(name);
      let _fullname = privateName.firstName + " " + privateName.lastName;
      _privateHello(_fullname);
    }
    printName() {
      let privateName = _privateName.get(this);
      let _fullname = privateName.firstName + " " + privateName.lastName;
      _privateHello(_fullname);
    }
  }

  return Name;
})();

var aMan = new Name("JH", "Son");
aMan.printName(); // "Hello, JH Son"
Name.printName(aMan); // "Hello, JH Son"

There is no event raised when a class changes. The alternative is to manually raise an event when you programatically change the class:

$someElement.on('event', function() {
    $('#myDiv').addClass('submission-ok').trigger('classChange');
});

// in another js file, far, far away
$('#myDiv').on('classChange', function() {
     // do stuff
});

UPDATE

This question seems to be gathering some visitors, so here is an update with an approach which can be used without having to modify existing code using the new MutationObserver:

var $div = $("#foo");_x000D_
var observer = new MutationObserver(function(mutations) {_x000D_
  mutations.forEach(function(mutation) {_x000D_
    if (mutation.attributeName === "class") {_x000D_
      var attributeValue = $(mutation.target).prop(mutation.attributeName);_x000D_
      console.log("Class attribute changed to:", attributeValue);_x000D_
    }_x000D_
  });_x000D_
});_x000D_
observer.observe($div[0], {_x000D_
  attributes: true_x000D_
});_x000D_
_x000D_
$div.addClass('red');

.red { color: #C00; }

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<div id="foo" class="bar">#foo.bar</div>

Be aware that the MutationObserver is only available for newer browsers, specifically Chrome 26, FF 14, IE 11, Opera 15 and Safari 6. See MDN for more details. If you need to support legacy browsers then you will need to use the method I outlined in my first example.

You need to say the following (since you befriend a whole template instead of just a specialization of it, in which case you would just need to add a <> after the operator<<):

template<typename T>
friend std::ostream& operator<<(std::ostream& out, const MyClass<T>& classObj);

Actually, there is no need to declare it as a friend unless it accesses private or protected members. Since you just get a warning, it appears your declaration of friendship is not a good idea. If you just want to declare a single specialization of it as a friend, you can do that like shown below, with a forward declaration of the template before your class, so that operator<< is regognized as a template.

// before class definition ...
template <class T>
class MyClass;

// note that this "T" is unrelated to the T of MyClass !
template<typename T>
std::ostream& operator<<(std::ostream& out, const MyClass<T>& classObj);

// in class definition ...
friend std::ostream& operator<< <>(std::ostream& out, const MyClass<T>& classObj);

Both the above and this way declare specializations of it as friends, but the first declares all specializations as friends, while the second only declares the specialization of operator<< as a friend whose T is equal to the T of the class granting friendship.

And in the other case, your declaration looks OK, but note that you cannot += a MyClass<T> to a MyClass<U> when T and U are different type with that declaration (unless you have an implicit conversion between those types). You can make your += a member template

// In MyClass.h
template<typename U>
MyClass<T>& operator+=(const MyClass<U>& classObj);


// In MyClass.cpp
template <class T> template<typename U>
MyClass<T>& MyClass<T>::operator+=(const MyClass<U>& classObj) {
  // ...
  return *this;
}

inspect.getargspec() to meet your needs

from inspect import getargspec

def func(a, b):
    pass
print len(getargspec(func).args)

Regarding the original question asked in the title ...

• sudo apt-get install libtcnative-1

• or if you are on RHEL Linux yum install tomcat-native

The documentation states you need http://tomcat.apache.org/native-doc/

• sudo apt-get install libapr1.0-dev libssl-dev
• or RHEL yum install apr-devel openssl-devel

Always google so you can locate the latest package for both NPP and NPP Plugins.

I googled "notepad++ 64bit". Downloaded the free latest version at Notepad++ (64-bit) - Free download and software. Installed notepad++ by double-click on npp.?.?.?.Installer.x64.exe, installed the .exe to default Windows 64bit path which is, "C:\Program Files".

Then, I googled "notepad++ 64 json viewer plug". Knowing SourceForge.Net is a renowned download site, downloaded JSToolNpp [email protected]. I unzipped and copied JSMinNPP.dll to notePad++ root dir.

I loaded my newly installed notepad++ 64bit. I went to Settings and selected [import plug-in]. I pointed to the location of JSMinNPP.dll and clicked open.

I reloaded notepad++, went to PlugIns menu. To format one-line json string to multi-line json doc, I clicked JSTool->JSFormat or reverse multi-line json doc to one-line json string by JSTool->JSMin (json-Minified)!

<!DOCTYPE html> without this tag border-radius doesn't works in IE9, no need of meta tags.

I had Node.js 6.x installed and wanted to install Node.js 8.x.

Here's the commands I used (taken from Nodejs's site with a few extra steps to handle the yum cached data):

1. sudo yum remove nodejs: Uninstall Node.js 6.x (I don't know if this was necessary or not)
2. curl --silent --location https://rpm.nodesource.com/setup_8.x | sudo bash -
3. sudo yum clean all
4. sudo yum makecache: Regenerate metadata cache (this wasn't in the docs, but yum kept trying to install Node.jx 6.x, unsuccessfully, until I issued these last two commands)
5. sudo yum install nodejs: Install Node.js 8.x

They are the same.

Both mean that when coming in to the load balancer, the request will be directed to the server that served the first request (and has the session).

like this?

<?php
$url_endpoint = get_permalink();
$url_endpoint = parse_url( $url_endpoint );
$url_endpoint = $url_endpoint['path'];

header('Location: http://linkhere.com/'. $url_endpoint);

?>

I have successfully styled my Bootstrap navbar using the following CSS. Also you didn't define any font in your CSS so that's why the font isn't changing. The site for which this CSS is used can be found here.

.navbar-default .navbar-nav > li > a:hover, .navbar-default .navbar-nav > li > a:focus {
    color: #000; /*Sets the text hover color on navbar*/
}

.navbar-default .navbar-nav > .active > a, .navbar-default .navbar-nav > .active >
        a:hover, .navbar-default .navbar-nav > .active > a:focus {
    color: white; /*BACKGROUND color for active*/
    background-color: #030033;
}

.navbar-default {
    background-color: #0f006f;
    border-color: #030033;
}

.dropdown-menu > li > a:hover,
.dropdown-menu > li > a:focus {
    color: #262626;
    text-decoration: none;
    background-color: #66CCFF; /*change color of links in drop down here*/
}

.nav > li > a:hover,
.nav > li > a:focus {
    text-decoration: none;
    background-color: silver; /*Change rollover cell color here*/
}

.navbar-default .navbar-nav > li > a {
    color: white; /*Change active text color here*/
}

has_key was removed in Python 3. From the documentation:

• Removed dict.has_key() – use the in operator instead.

Here's an example:

if start not in graph:
    return None

try This Code

var check = function(evt){_x000D_
_x000D_
var data = document.getElementById('num').value;_x000D_
if((evt.charCode>= 48 && evt.charCode <= 57) || evt.charCode== 46 ||evt.charCode == 0){_x000D_
if(data.indexOf('.') > -1){_x000D_
 if(evt.charCode== 46)_x000D_
  evt.preventDefault();_x000D_
}_x000D_
}else_x000D_
evt.preventDefault();_x000D_
};_x000D_
_x000D_
document.getElementById('num').addEventListener('keypress',check);

<!DOCTYPE html>_x000D_
<html>_x000D_
<head>_x000D_
<title>Page Title</title>_x000D_
</head>_x000D_
<body>_x000D_
<input type="text" id="num" value="" />_x000D_
_x000D_
_x000D_
_x000D_
</body>_x000D_
</html>

I observed in the Catalina privacy setting if Xcode not added in Full access disk I will get the same error, Xcode does not run scripts. Add your Xcode the same as in the attached image. After that clean build and run. Hope so it will work.

Go to your folder path in cmd where your angular is installed and type ng --version it will show your angular version. Thanks.

You can cast the DATETIME field into DATE as:

SELECT * FROM `calendar` WHERE CAST(startTime AS DATE) = '2010-04-29'

This is very much efficient.

A more general approach:

if ( ($("body").hasClass("homepage") || $("body").hasClass("contact")) && (theLanguage == 'en-gb') )   {

       // Do something

}

def quit(self):
    self.root.destroy()

Add parentheses after destroy to call the method.

When you use command=self.root.destroy you pass the method to Tkinter.Button without the parentheses because you want Tkinter.Button to store the method for future calling, not to call it immediately when the button is created.

But when you define the quit method, you need to call self.root.destroy() in the body of the method because by then the method has been called.

Here is an easy and convenient cursor based solution

DECLARE
@search_string  VARCHAR(100),
@table_name     SYSNAME,
@table_id       INT,
@column_name    SYSNAME,
@sql_string     VARCHAR(2000)

SET @search_string = 'StringtoSearch'

DECLARE tables_cur CURSOR FOR SELECT name, object_id FROM sys.objects WHERE  type = 'U'

OPEN tables_cur

FETCH NEXT FROM tables_cur INTO @table_name, @table_id

WHILE (@@FETCH_STATUS = 0)
BEGIN
    DECLARE columns_cur CURSOR FOR SELECT name FROM sys.columns WHERE object_id = @table_id 
        AND system_type_id IN (167, 175, 231, 239)

    OPEN columns_cur

    FETCH NEXT FROM columns_cur INTO @column_name
        WHILE (@@FETCH_STATUS = 0)
        BEGIN
            SET @sql_string = 'IF EXISTS (SELECT * FROM ' + @table_name + ' WHERE [' + @column_name + '] 
            LIKE ''%' + @search_string + '%'') PRINT ''' + @table_name + ', ' + @column_name + ''''

            EXECUTE(@sql_string)

        FETCH NEXT FROM columns_cur INTO @column_name
        END

    CLOSE columns_cur

DEALLOCATE columns_cur

FETCH NEXT FROM tables_cur INTO @table_name, @table_id
END

CLOSE tables_cur
DEALLOCATE tables_cur

Now this can be achieved with the JSONLib library:

http://json-lib.sourceforge.net/apidocs/net/sf/json/JSONObject.html

If (and only if) you use the overloaded toString(int indentationFactor) method and not the standard toString() method.

I have verified this on the following version of the API:

<dependency>
  <groupId>org.json</groupId>
  <artifactId>json</artifactId>
  <version>20140107</version>
</dependency>

You probably want to make a range query, for example, all items created after a given date:

db.gpsdatas.find({"createdAt" : { $gte : new ISODate("2012-01-12T20:15:31Z") }});

I'm using $gte (greater than or equals), because this is often used for date-only queries, where the time component is 00:00:00.

If you really want to find a date that equals another date, the syntax would be

db.gpsdatas.find({"createdAt" : new ISODate("2012-01-12T20:15:31Z") });

You're half way there on your own. To implement a refresh, you'd just wrap what you already have in a function on the scope:

function PersonListCtrl($scope, $http) {
  $scope.loadData = function () {
     $http.get('/persons').success(function(data) {
       $scope.persons = data;
     });
  };

  //initial load
  $scope.loadData();
}

then in your markup

<div ng-controller="PersonListCtrl">
    <ul>
        <li ng-repeat="person in persons">
            Name: {{person.name}}, Age {{person.age}}
        </li>
    </ul>
   <button ng-click="loadData()">Refresh</button>
</div>

As far as "accessing your model", all you'd need to do is access that $scope.persons array in your controller:

for example (just puedo code) in your controller:

$scope.addPerson = function() {
     $scope.persons.push({ name: 'Test Monkey' });
};

Then you could use that in your view or whatever you'd want to do.

A simple solution using importlib instead of the imp package (tested for Python 2.7, although it should work for Python 3 too):

import importlib

dirname, basename = os.path.split(pyfilepath) # pyfilepath: '/my/path/mymodule.py'
sys.path.append(dirname) # only directories should be added to PYTHONPATH
module_name = os.path.splitext(basename)[0] # '/my/path/mymodule.py' --> 'mymodule'
module = importlib.import_module(module_name) # name space of defined module (otherwise we would literally look for "module_name")

Now you can directly use the namespace of the imported module, like this:

a = module.myvar
b = module.myfunc(a)

The advantage of this solution is that we don't even need to know the actual name of the module we would like to import, in order to use it in our code. This is useful, e.g. in case the path of the module is a configurable argument.

The value you have passed as the file descriptor is not valid. It is either negative or does not represent a currently open file or socket.

So you have either closed the socket before calling write() or you have corrupted the value of 'sockfd' somewhere in your code.

It would be useful to trace all calls to close(), and the value of 'sockfd' prior to the write() calls.

Your technique of only printing error messages in debug mode seems to me complete madness, and in any case calling another function between a system call and perror() is invalid, as it may disturb the value of errno. Indeed it may have done so in this case, and the real underlying error may be different.

The CSV format sounds easy enough for StringTokenizer but it can become more complicated. Here in Germany a semicolon is used as a delimiter and cells containing delimiters need to be escaped. You're not going to handle that easily with StringTokenizer.

I would go for http://sourceforge.net/projects/javacsv

I tried following format, working fine

*/5 * * * * wget --quiet -O /dev/null http://localhost/cron.php

To see if a dataframe is empty, I argue that one should test for the length of a dataframe's columns index:

if len(df.columns) == 0: 1

Reason:

According to the Pandas Reference API, there is a distinction between:

• an empty dataframe with 0 rows and 0 columns
• an empty dataframe with rows containing NaN hence at least 1 column

Arguably, they are not the same. The other answers are imprecise in that df.empty, len(df), or len(df.index) make no distinction and return index is 0 and empty is True in both cases.

Examples

Example 1: An empty dataframe with 0 rows and 0 columns

In [1]: import pandas as pd
        df1 = pd.DataFrame()
        df1
Out[1]: Empty DataFrame
        Columns: []
        Index: []

In [2]: len(df1.index)  # or len(df1)
Out[2]: 0

In [3]: df1.empty
Out[3]: True

Example 2: A dataframe which is emptied to 0 rows but still retains n columns

In [4]: df2 = pd.DataFrame({'AA' : [1, 2, 3], 'BB' : [11, 22, 33]})
        df2
Out[4]:    AA  BB
        0   1  11
        1   2  22
        2   3  33

In [5]: df2 = df2[df2['AA'] == 5]
        df2
Out[5]: Empty DataFrame
        Columns: [AA, BB]
        Index: []

In [6]: len(df2.index)  # or len(df2)
Out[6]: 0

In [7]: df2.empty
Out[7]: True

Now, building on the previous examples, in which the index is 0 and empty is True. When reading the length of the columns index for the first loaded dataframe df1, it returns 0 columns to prove that it is indeed empty.

In [8]: len(df1.columns)
Out[8]: 0

In [9]: len(df2.columns)
Out[9]: 2

Critically, while the second dataframe df2 contains no data, it is not completely empty because it returns the amount of empty columns that persist.

Why it matters

Let's add a new column to these dataframes to understand the implications:

# As expected, the empty column displays 1 series
In [10]: df1['CC'] = [111, 222, 333]
         df1
Out[10]:    CC
         0 111
         1 222
         2 333
In [11]: len(df1.columns)
Out[11]: 1

# Note the persisting series with rows containing `NaN` values in df2
In [12]: df2['CC'] = [111, 222, 333]
         df2
Out[12]:    AA  BB   CC
         0 NaN NaN  111
         1 NaN NaN  222
         2 NaN NaN  333
In [13]: len(df2.columns)
Out[13]: 3

It is evident that the original columns in df2 have re-surfaced. Therefore, it is prudent to instead read the length of the columns index with len(pandas.core.frame.DataFrame.columns) to see if a dataframe is empty.

Practical solution

# New dataframe df
In [1]: df = pd.DataFrame({'AA' : [1, 2, 3], 'BB' : [11, 22, 33]})
        df
Out[1]:    AA  BB
        0   1  11
        1   2  22
        2   3  33

# This data manipulation approach results in an empty df
# because of a subset of values that are not available (`NaN`)
In [2]: df = df[df['AA'] == 5]
        df
Out[2]: Empty DataFrame
        Columns: [AA, BB]
        Index: []

# NOTE: the df is empty, BUT the columns are persistent
In [3]: len(df.columns)
Out[3]: 2

# And accordingly, the other answers on this page
In [4]: len(df.index)  # or len(df)
Out[4]: 0

In [5]: df.empty
Out[5]: True

# SOLUTION: conditionally check for empty columns
In [6]: if len(df.columns) != 0:  # <--- here
            # Do something, e.g. 
            # drop any columns containing rows with `NaN`
            # to make the df really empty
            df = df.dropna(how='all', axis=1)
        df
Out[6]: Empty DataFrame
        Columns: []
        Index: []

# Testing shows it is indeed empty now
In [7]: len(df.columns)
Out[7]: 0

Adding a new data series works as expected without the re-surfacing of empty columns (factually, without any series that were containing rows with only NaN):

In [8]: df['CC'] = [111, 222, 333]
         df
Out[8]:    CC
         0 111
         1 222
         2 333
In [9]: len(df.columns)
Out[9]: 1

The FileInputStream class works directly with the underlying file system. If the file in question is not physically present there, it will fail to open it. The getResourceAsStream() method works differently. It tries to locate and load the resource using the ClassLoader of the class it is called on. This enables it to find, for example, resources embedded into jar files.

Ivan's answer above is good:

composer global show -i

Added info: if you get a message somewhat like:

Composer could not find a composer.json file in ~/.composer

...you might have no packages installed yet. If so, you can ignore the next part of the message containing:

... please create a composer.json file ...

...as once you install a package the message will go away.

Safari now blocks all third party cookies. You can only use the Storage API to try to get user access to their third party cookies.

https://www.infoq.com/news/2020/04/safari-third-party-cookies-block/

I'm adding this answer because I don't see it here.

One way is to put a '+' character in front of the value

example:

var x = +'11.5' + +'3.5'

x === 15

I have found this to be the simplest way

In this case, the line:

dots = document.getElementById("txt").value;

could be changed to

dots = +(document.getElementById("txt").value);

to force it to a number

NOTE:

+'' === 0
+[] === 0
+[5] === 5
+['5'] === 5

You can try this, it looks up for the index containing this element, and it sets the index number as the int, then it checks if the int is greater then -1, so if it's 0 or more, then it means it found such an index - as arrays are 0 based.

string[] Selection = {"First", "Second", "Third", "Fourth"};
string Valid = "Third";    // You can change this to a Console.ReadLine() to 
    //use user input 
int temp = Array.IndexOf(Selection, Valid); // it gets the index of 'Valid', 
                // in our case it's "Third"
            if (temp > -1)
                Console.WriteLine("Valid selection");
            }
            else
            {
                Console.WriteLine("Not a valid selection");
            }

Here's one: (check out http://hongouru.blogspot.ie/2011/09/c-ocr-optical-character-recognition.html or http://www.codeproject.com/Articles/41709/How-To-Use-Office-2007-OCR-Using-C for more info)

using MODI;
static void Main(string[] args)
{
    DocumentClass myDoc = new DocumentClass();
    myDoc.Create(@"theDocumentName.tiff"); //we work with the .tiff extension
    myDoc.OCR(MiLANGUAGES.miLANG_ENGLISH, true, true);

    foreach (Image anImage in myDoc.Images)
    {
        Console.WriteLine(anImage.Layout.Text); //here we cout to the console.
    }
}

To formalize some of the approaches laid out above:

Create a function that operates on the rows of your dataframe like so:

def f(row):
    if row['A'] == row['B']:
        val = 0
    elif row['A'] > row['B']:
        val = 1
    else:
        val = -1
    return val

Then apply it to your dataframe passing in the axis=1 option:

In [1]: df['C'] = df.apply(f, axis=1)

In [2]: df
Out[2]:
   A  B  C
a  2  2  0
b  3  1  1
c  1  3 -1

Of course, this is not vectorized so performance may not be as good when scaled to a large number of records. Still, I think it is much more readable. Especially coming from a SAS background.

Edit

Here is the vectorized version

df['C'] = np.where(
    df['A'] == df['B'], 0, np.where(
    df['A'] >  df['B'], 1, -1)) 

This looks confusing because you are taking long as a datatype itself.

long is nothing but just the shorthand for long int when you are using it alone.

long is a modifier, you can use it with double also as long double.

long == long int.

Both of them take 4 bytes.

The simplest way to do this in plain bash is to use process substitution instead of a pipeline. There are several differences, but they probably don't matter very much for your use case:

• When running a pipeline, bash waits until all processes complete.
• Sending Ctrl-C to bash makes it kill all the processes of a pipeline, not just the main one.
• The pipefail option and the PIPESTATUS variable are irrelevant to process substitution.
• Possibly more

With process substitution, bash just starts the process and forgets about it, it's not even visible in jobs.

Mentioned differences aside, consumer < <(producer) and producer | consumer are essentially equivalent.

If you want to flip which one is the "main" process, you just flip the commands and the direction of the substitution to producer > >(consumer). In your case:

command > >(tee out.txt)

Example:

$ { echo "hello world"; false; } > >(tee out.txt)
hello world
$ echo $?
1
$ cat out.txt
hello world

$ echo "hello world" > >(tee out.txt)
hello world
$ echo $?
0
$ cat out.txt
hello world

As I said, there are differences from the pipe expression. The process may never stop running, unless it is sensitive to the pipe closing. In particular, it may keep writing things to your stdout, which may be confusing.

Here is a simple way using an ArrayList:

List<Integer> solution = new ArrayList<>();
for (int i = 1; i <= 6; i++) {
    solution.add(i);
}
Collections.shuffle(solution);

Check Below Codes :

1. SynchronousRequest

Swift 1.2

    let urlPath: String = "YOUR_URL_HERE"
    var url: NSURL = NSURL(string: urlPath)!
    var request1: NSURLRequest = NSURLRequest(URL: url)
    var response: AutoreleasingUnsafeMutablePointer<NSURLResponse?>=nil
    var dataVal: NSData =  NSURLConnection.sendSynchronousRequest(request1, returningResponse: response, error:nil)!
    var err: NSError
    println(response)
    var jsonResult: NSDictionary = NSJSONSerialization.JSONObjectWithData(dataVal, options: NSJSONReadingOptions.MutableContainers, error: &err) as? NSDictionary
    println("Synchronous\(jsonResult)")

Swift 2.0 +

let urlPath: String = "YOUR_URL_HERE"
    let url: NSURL = NSURL(string: urlPath)!
    let request1: NSURLRequest = NSURLRequest(URL: url)
    let response: AutoreleasingUnsafeMutablePointer<NSURLResponse?>=nil


    do{

        let dataVal = try NSURLConnection.sendSynchronousRequest(request1, returningResponse: response)

            print(response)
            do {
                if let jsonResult = try NSJSONSerialization.JSONObjectWithData(dataVal, options: []) as? NSDictionary {
                    print("Synchronous\(jsonResult)")
                }
            } catch let error as NSError {
                print(error.localizedDescription)
            }



    }catch let error as NSError
    {
         print(error.localizedDescription)
    }

2. AsynchonousRequest

Swift 1.2

let urlPath: String = "YOUR_URL_HERE"
    var url: NSURL = NSURL(string: urlPath)!
    var request1: NSURLRequest = NSURLRequest(URL: url)
    let queue:NSOperationQueue = NSOperationQueue()
    NSURLConnection.sendAsynchronousRequest(request1, queue: queue, completionHandler:{ (response: NSURLResponse!, data: NSData!, error: NSError!) -> Void in
        var err: NSError
        var jsonResult: NSDictionary = NSJSONSerialization.JSONObjectWithData(data, options: NSJSONReadingOptions.MutableContainers, error: nil) as NSDictionary
        println("Asynchronous\(jsonResult)")
       })

Swift 2.0 +

let urlPath: String = "YOUR_URL_HERE"
    let url: NSURL = NSURL(string: urlPath)!
    let request1: NSURLRequest = NSURLRequest(URL: url)
    let queue:NSOperationQueue = NSOperationQueue()

    NSURLConnection.sendAsynchronousRequest(request1, queue: queue, completionHandler:{ (response: NSURLResponse?, data: NSData?, error: NSError?) -> Void in

        do {
            if let jsonResult = try NSJSONSerialization.JSONObjectWithData(data!, options: []) as? NSDictionary {
                print("ASynchronous\(jsonResult)")
            }
        } catch let error as NSError {
            print(error.localizedDescription)
        }


    })

3. As usual URL connection

Swift 1.2

    var dataVal = NSMutableData()
    let urlPath: String = "YOUR URL HERE"
    var url: NSURL = NSURL(string: urlPath)!
    var request: NSURLRequest = NSURLRequest(URL: url)
    var connection: NSURLConnection = NSURLConnection(request: request, delegate: self, startImmediately: true)!
    connection.start()

Then

 func connection(connection: NSURLConnection!, didReceiveData data: NSData!){
    self.dataVal?.appendData(data)
}


func connectionDidFinishLoading(connection: NSURLConnection!)
{
    var error: NSErrorPointer=nil

    var jsonResult: NSDictionary = NSJSONSerialization.JSONObjectWithData(dataVal!, options: NSJSONReadingOptions.MutableContainers, error: error) as NSDictionary

    println(jsonResult)



}

Swift 2.0 +

   var dataVal = NSMutableData()
    let urlPath: String = "YOUR URL HERE"
    var url: NSURL = NSURL(string: urlPath)!
    var request: NSURLRequest = NSURLRequest(URL: url)
    var connection: NSURLConnection = NSURLConnection(request: request, delegate: self, startImmediately: true)!
    connection.start()

Then

func connection(connection: NSURLConnection!, didReceiveData data: NSData!){
    dataVal.appendData(data)
}


func connectionDidFinishLoading(connection: NSURLConnection!)
{

    do {
        if let jsonResult = try NSJSONSerialization.JSONObjectWithData(dataVal, options: []) as? NSDictionary {
            print(jsonResult)
        }
    } catch let error as NSError {
        print(error.localizedDescription)
    }

}

4. Asynchronous POST Request

Swift 1.2

    let urlPath: String = "YOUR URL HERE"
    var url: NSURL = NSURL(string: urlPath)!
    var request1: NSMutableURLRequest = NSMutableURLRequest(URL: url)

    request1.HTTPMethod = "POST"
     var stringPost="deviceToken=123456" // Key and Value

    let data = stringPost.dataUsingEncoding(NSUTF8StringEncoding)

    request1.timeoutInterval = 60
    request1.HTTPBody=data
    request1.HTTPShouldHandleCookies=false

    let queue:NSOperationQueue = NSOperationQueue()

     NSURLConnection.sendAsynchronousRequest(request1, queue: queue, completionHandler:{ (response: NSURLResponse!, data: NSData!, error: NSError!) -> Void in


        var err: NSError

        var jsonResult: NSDictionary = NSJSONSerialization.JSONObjectWithData(data, options: NSJSONReadingOptions.MutableContainers, error: nil) as NSDictionary
        println("AsSynchronous\(jsonResult)")


        })

Swift 2.0 +

let urlPath: String = "YOUR URL HERE"
    let url: NSURL = NSURL(string: urlPath)!
    let request1: NSMutableURLRequest = NSMutableURLRequest(URL: url)

    request1.HTTPMethod = "POST"
    let stringPost="deviceToken=123456" // Key and Value

    let data = stringPost.dataUsingEncoding(NSUTF8StringEncoding)

    request1.timeoutInterval = 60
    request1.HTTPBody=data
    request1.HTTPShouldHandleCookies=false

    let queue:NSOperationQueue = NSOperationQueue()

    NSURLConnection.sendAsynchronousRequest(request1, queue: queue, completionHandler:{ (response: NSURLResponse?, data: NSData?, error: NSError?) -> Void in

        do {
            if let jsonResult = try NSJSONSerialization.JSONObjectWithData(data!, options: []) as? NSDictionary {
                print("ASynchronous\(jsonResult)")
            }
        } catch let error as NSError {
            print(error.localizedDescription)
        }


    })

5. Asynchronous GET Request

Swift 1.2

    let urlPath: String = "YOUR URL HERE"
    var url: NSURL = NSURL(string: urlPath)!
    var request1: NSMutableURLRequest = NSMutableURLRequest(URL: url)

    request1.HTTPMethod = "GET"
    request1.timeoutInterval = 60
    let queue:NSOperationQueue = NSOperationQueue()

     NSURLConnection.sendAsynchronousRequest(request1, queue: queue, completionHandler:{ (response: NSURLResponse!, data: NSData!, error: NSError!) -> Void in


        var err: NSError

        var jsonResult: NSDictionary = NSJSONSerialization.JSONObjectWithData(data, options: NSJSONReadingOptions.MutableContainers, error: nil) as NSDictionary
        println("AsSynchronous\(jsonResult)")


        })

Swift 2.0 +

let urlPath: String = "YOUR URL HERE"
    let url: NSURL = NSURL(string: urlPath)!
    let request1: NSMutableURLRequest = NSMutableURLRequest(URL: url)

    request1.HTTPMethod = "GET"
    let queue:NSOperationQueue = NSOperationQueue()

    NSURLConnection.sendAsynchronousRequest(request1, queue: queue, completionHandler:{ (response: NSURLResponse?, data: NSData?, error: NSError?) -> Void in

        do {
            if let jsonResult = try NSJSONSerialization.JSONObjectWithData(data!, options: []) as? NSDictionary {
                print("ASynchronous\(jsonResult)")
            }
        } catch let error as NSError {
            print(error.localizedDescription)
        }


    })

6. Image(File) Upload

Swift 2.0 +

  let mainURL = "YOUR_URL_HERE"

    let url = NSURL(string: mainURL)
    let request = NSMutableURLRequest(URL: url!)
    let boundary = "78876565564454554547676"
    request.addValue("multipart/form-data; boundary=\(boundary)", forHTTPHeaderField: "Content-Type")


    request.HTTPMethod = "POST" // POST OR PUT What you want
    let session = NSURLSession(configuration:NSURLSessionConfiguration.defaultSessionConfiguration(), delegate: nil, delegateQueue: nil)

    let imageData = UIImageJPEGRepresentation(UIImage(named: "Test.jpeg")!, 1)





    var body = NSMutableData()

    body.appendData("--\(boundary)\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)

    // Append your parameters

    body.appendData("Content-Disposition: form-data; name=\"name\"\r\n\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)
    body.appendData("PREMKUMAR\r\n".dataUsingEncoding(NSUTF8StringEncoding, allowLossyConversion: true)!)
    body.appendData("--\(boundary)\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)

    body.appendData("Content-Disposition: form-data; name=\"description\"\r\n\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)
    body.appendData("IOS_DEVELOPER\r\n".dataUsingEncoding(NSUTF8StringEncoding, allowLossyConversion: true)!)
    body.appendData("--\(boundary)\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)


    // Append your Image/File Data

    var imageNameval = "HELLO.jpg"

    body.appendData("--\(boundary)\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)
    body.appendData("Content-Disposition: form-data; name=\"profile_photo\"; filename=\"\(imageNameval)\"\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)
    body.appendData("Content-Type: image/jpeg\r\n\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)
    body.appendData(imageData!)
    body.appendData("\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)

    body.appendData("--\(boundary)--\r\n".dataUsingEncoding(NSUTF8StringEncoding)!)

    request.HTTPBody = body




    let dataTask = session.dataTaskWithRequest(request) { (data, response, error) -> Void in

        if error != nil {

            //handle error


        }
        else {




            let outputString : NSString = NSString(data:data!, encoding:NSUTF8StringEncoding)!
            print("Response:\(outputString)")


        }
    }
    dataTask.resume()

7. GET,POST,Etc Swift 3.0 +

let request = NSMutableURLRequest(url: URL(string: "YOUR_URL_HERE" ,param: param))!,
    cachePolicy: .useProtocolCachePolicy,
    timeoutInterval:60)
request.httpMethod = "POST" // POST ,GET, PUT What you want 

let session = URLSession.shared



  let dataTask = session.dataTask(with: request as URLRequest) {data,response,error in

do {
            if let jsonResult = try NSJSONSerialization.JSONObjectWithData(data!, options: []) as? NSDictionary {
                print("ASynchronous\(jsonResult)")
            }
        } catch let error as NSError {
            print(error.localizedDescription)
        }

    }
    dataTask.resume()

You need to define the server instance in the Servers view.

In the box at the right bottom, press the Servers tab and add the server there. You by the way don't necessarily need to add it through global IDE preferences. It will be automagically added when you define it in Servers view. The preference you've modified just defines default locations, not the whole server instance itself. If you for instance upgrade/move the server, you can change the physical location there.

Once defining the server in the Servers view, you need to add the newly created server instance to the project through its Server and Targeted runtime preference.

It depends on how and where you declared your array list. If it is an instance variable in the same class like your AnalyseArray() method you don't have to pass it along. The method will know the list and you can simply use the A in whatever purpose you need.

If they don't know each other, e.g. beeing a local variable or declared in a different class, define that your AnalyseArray() method needs an ArrayList parameter

public void AnalyseArray(ArrayList<Integer> theList){}

and then work with theList inside that method. But don't forget to actually pass it on when calling the method.AnalyseArray(A);

PS: Some maybe helpful Information to Variables and parameters.

You could use the following query:

SELECT  table1.id 
FROM    table1 
        LEFT JOIN table2 
            ON table1.id IN (table2.user_one, table2.user_two)
WHERE   table2.user_one IS NULL;

Although, depending on your indexes on table2 you may find that two joins performs better:

SELECT  table1.id 
FROM    table1 
        LEFT JOIN table2 AS t1
            ON table1.id = t1.user_one
        LEFT JOIN table2 AS t2
            ON table1.id = t2.user_two
WHERE   t1.user_one IS NULL
AND     t2.user_two IS NULL;

That is because FirstOrDefaultcan return null causing your following .Value to cause the exception. You need to change it to something like:

var myThing = things.FirstOrDefault(t => t.Id == idToFind);

if(myThing == null)
    return; // we failed to find what we wanted
var displayName = myThing.DisplayName;

This is an example of using the :checked pseudo-class to make forms more accessible. The :checked pseudo-class can be used with hidden inputs and their visible labels to build interactive widgets, such as image galleries. I created the snipped for the people that wanna test.

input[type=checkbox] + label {_x000D_
  color: #ccc;_x000D_
  font-style: italic;_x000D_
} _x000D_
input[type=checkbox]:checked + label {_x000D_
  color: #f00;_x000D_
  font-style: normal;_x000D_
} 

<input type="checkbox" id="cb_name" name="cb_name"> _x000D_
<label for="cb_name">CSS is Awesome</label> 

Try this SELECT DISTINCT 10 * ...

In a specific case the issue is due to the maven-archetype-webapp which is released for a dynamic webapp, faceted to the ver.2.5 (see the produced web.xml and the related xsd) and it's related to eclipse. When you try to change the project facet to dynamic webapp > 2.5 the src folder structure will syntactically change (the 2.5 is different from 3.1), but not fisically.

This is why you will face in a null pointer exception if you apply to the changes.

To solve it you have to set from the project facets configuration the Default configuration. Apply the changes, then going into the Java Build Path you have to remove the /src folder and create the /src/main/java folder at least (it's also required /src/main/resources and /src/test/java to be compliant) re-change into the required configuration you desire (3.0, 3.1) and then do apply.

There is pure CSS4 solution:

.selectable{
    -webkit-touch-callout: all; /* iOS Safari */
    -webkit-user-select: all; /* Safari */
    -khtml-user-select: all; /* Konqueror HTML */
    -moz-user-select: all; /* Firefox */
    -ms-user-select: all; /* Internet Explorer/Edge */
    user-select: all; /* Chrome and Opera */

}

user-select is a CSS Module Level 4 specification, that is currently a draft and non-standard CSS property, but browsers support it well — see #search=user-select.

.selectable{
    -webkit-touch-callout: all; /* iOS Safari */
    -webkit-user-select: all; /* Safari */
    -khtml-user-select: all; /* Konqueror HTML */
    -moz-user-select: all; /* Firefox */
    -ms-user-select: all; /* Internet Explorer/Edge */
    user-select: all; /* Chrome and Opera */

}

<div class="selectable">
click and all this will be selected
</div>

Read more on user-select here on MDN and play with it here in w3scools

The simplest way is to test whether a number is an integer is int(x) == x. Otherwise, what David Heffernan said.

No need for jQuery! This simple snippet works fine for me. It uses angular.element() to bind window resize event.

/**
 * Window resize event handling
 */
angular.element($window).on('resize', function () {
    console.log($window.innerWidth);
});    

Unbind event

/**
 * Window resize unbind event      
 */
angular.element($window).off('resize');

Only public static void main(String[] args) counts. This is the only signature considered to be the true main() (as the program entry point, I mean).

Center it horizontally:

display: fixed;
top: 0; 
left: 0;
transform: translate(calc(50vw - 50%));

Center it horizontally and vertically:

display: fixed;
top: 0; 
left: 0;
transform: translate(calc(50vw - 50%), calc(50vh - 50%));

No side effect: It will not limit element's width when using margins in flexbox

Compare them as other values:

if($array_a == $array_b) {
  //they are the same
}

You can read about all array operators here: http://php.net/manual/en/language.operators.array.php Note for example that === also checks that the types and order of the elements in the arrays are the same.

Use the reflect package:

Package reflect implements run-time reflection, allowing a program to manipulate objects with arbitrary types. The typical use is to take a value with static type interface{} and extract its dynamic type information by calling TypeOf, which returns a Type.

package main

import (
    "fmt"
    "reflect"
)

func main() {
    b := true
    s := ""
    n := 1
    f := 1.0
    a := []string{"foo", "bar", "baz"}

    fmt.Println(reflect.TypeOf(b))
    fmt.Println(reflect.TypeOf(s))
    fmt.Println(reflect.TypeOf(n))
    fmt.Println(reflect.TypeOf(f))
    fmt.Println(reflect.TypeOf(a))
}

Produces:

bool
string
int
float64
[]string

Playground

Example using ValueOf(i interface{}).Kind():

package main

import (
    "fmt"
    "reflect"
)

func main() {
    b := true
    s := ""
    n := 1
    f := 1.0
    a := []string{"foo", "bar", "baz"}

    fmt.Println(reflect.ValueOf(b).Kind())
    fmt.Println(reflect.ValueOf(s).Kind())
    fmt.Println(reflect.ValueOf(n).Kind())
    fmt.Println(reflect.ValueOf(f).Kind())
    fmt.Println(reflect.ValueOf(a).Index(0).Kind()) // For slices and strings
}

Produces:

bool
string
int
float64
string

Playground

It can be done using SQL Server Import and Export Wizard. But if you're familiar with SSIS and don't want to run the SQL Server Import and Export Wizard, create an SSIS package that uses the Excel Source and the SQL Server Destination in the data flow.

IMO, you cannot create an empty Date(java.util). You can create a Date object with null value and can put a null check.

 Date date = new Date(); // Today's date and current time
 Date date2 = new Date(0); // Default date and time
 Date date3 = null; //Date object with null as value.
 if(null != date3) {
    // do your work.
 }

Please try this, it works for any redirection on WordPress

add_filter('woocommerce_login_redirect', 'wc_login_redirect'); 

function wc_login_redirect( $redirect_to ) {

   $redirect_to = 'PUT HERE URL OF THE PAGE';
   return $redirect_to;

}

As Henrik wrote you can use dblink to connect remote database and fetch result. For example:

psql dbtest
CREATE TABLE tblB (id serial, time integer);
INSERT INTO tblB (time) VALUES (5000), (2000);

psql postgres
CREATE TABLE tblA (id serial, time integer);

INSERT INTO tblA
    SELECT id, time 
    FROM dblink('dbname=dbtest', 'SELECT id, time FROM tblB')
    AS t(id integer, time integer)
    WHERE time > 1000;

TABLE tblA;
 id | time 
----+------
  1 | 5000
  2 | 2000
(2 rows)

PostgreSQL has record pseudo-type (only for function's argument or result type), which allows you query data from another (unknown) table.

Edit:

You can make it as prepared statement if you want and it works as well:

PREPARE migrate_data (integer) AS
INSERT INTO tblA
    SELECT id, time
    FROM dblink('dbname=dbtest', 'SELECT id, time FROM tblB')
    AS t(id integer, time integer)
    WHERE time > $1;

EXECUTE migrate_data(1000);
-- DEALLOCATE migrate_data;

Edit (yeah, another):

I just saw your revised question (closed as duplicate, or just very similar to this).

If my understanding is correct (postgres has tbla and dbtest has tblb and you want remote insert with local select, not remote select with local insert as above):

psql dbtest

SELECT dblink_exec
(
    'dbname=postgres',
    'INSERT INTO tbla
        SELECT id, time
        FROM dblink
        (
            ''dbname=dbtest'',
            ''SELECT id, time FROM tblb''
        )
        AS t(id integer, time integer)
        WHERE time > 1000;'
);

I don't like that nested dblink, but AFAIK I can't reference to tblB in dblink_exec body. Use LIMIT to specify top 20 rows, but I think you need to sort them using ORDER BY clause first.

System.out.println(myList.size());

Since no elements are in the list

output => 0

myList.add("newString");  // use myList.add() to insert elements to the arraylist
System.out.println(myList.size());

Since one element is added to the list

output => 1

The expression a == b should do the job.

It's simply “No such directory entry”. Since directory entries can be directories or files (or symlinks, or sockets, or pipes, or devices), the name ENOFILE would have been too narrow in its meaning.

try out this if you want to assign value to object and it is showing this error in angular..

crate object in construtor

this.modelObj = new Model(); //<---------- after declaring object above

If in .net ( I'm not sure if it works for all windows services)

• Stop the service (THis may be why you're having a problem.)
• InstallUtil -u [name of executable]
• Installutil -i [name of executable]
• Start the service again...

Unless I'm changing the service's public interface, I often deploy upgraded versions of my services without even unistalling/reinstalling... ALl I do is stop the service, replace the files and restart the service again...

You just need to escape characters that have special meaning: # $ % & ~ _ ^ \ { }

So

http://stack_overflow.com/~foo%20bar#link

would be

http://stack\_overflow.com/\~foo\%20bar\#link

You have to call close() on the GZIPOutputStream before you attempt to read it. The final bytes of the file will only be written when the file is actually closed. (This is irrespective of any explicit buffering in the output stack. The stream only knows to compress and write the last bytes when you tell it to close. A flush() probably won't help ... though calling finish() instead of close() should work. Look at the javadocs.)

Here's the correct code (in Java);

package test;

import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import java.util.zip.GZIPInputStream;
import java.util.zip.GZIPOutputStream;

public class GZipTest {

    public static void main(String[] args) throws
                FileNotFoundException, IOException {
        String name = "/tmp/test";
        GZIPOutputStream gz = new GZIPOutputStream(new FileOutputStream(name));
        gz.write(10);
        gz.close();       // Remove this to reproduce the reported bug
        System.out.println(new GZIPInputStream(new FileInputStream(name)).read());
    }
}

(I've not implemented resource management or exception handling / reporting properly as they are not relevant to the purpose of this code. Don't treat this as an example of "good code".)

None of these worked for me in Ubuntu 16.4.

Another case that could cause this error is

>>> np.ndindex(np.random.rand(60,60))
TypeError: only integer scalar arrays can be converted to a scalar index

Using the actual shape will fix it.

>>> np.ndindex(np.random.rand(60,60).shape)
<numpy.ndindex object at 0x000001B887A98880>

Answers above are correct but didn't exactly help me as there was additional information I required.

I have just setup Spark so the log4j file still had the '.template' suffix and wasn't being read. I believe that logging then defaults to Spark core logging conf.

So if you are like me and find that the answers above didn't help, then maybe you too have to remove the '.template' suffix from your log4j conf file and then the above works perfectly!

http://apache-spark-user-list.1001560.n3.nabble.com/disable-log4j-for-spark-shell-td11278.html

Seems, css transforms can be used

"‘transform’ property establishes a new local coordinate system at the element",

but ... this is not cross-browser, seems only Opera works correctly

you can use this function to download file from base64.

function downloadPDF(pdf) {
const linkSource = `data:application/pdf;base64,${pdf}`;
const downloadLink = document.createElement("a");
const fileName = "abc.pdf";
downloadLink.href = linkSource;
downloadLink.download = fileName;
downloadLink.click();}

This code will made an anchor tag with href and download file. if you want to use button then you can call click method on your button click.

i hope this will help of you thanks

This code makes numbering style same as headers of li content.

<style>
    h4 {font-size: 18px}
    ol.list-h4 {counter-reset: item; padding-left:27px}
    ol.list-h4 > li {display: block}
    ol.list-h4 > li::before {display: block; position:absolute;  left:16px;  top:auto; content: counter(item)"."; counter-increment: item; font-size: 18px}
    ol.list-h4 > li > h4 {padding-top:3px}
</style>

<ol class="list-h4">
    <li>
        <h4>...</h4>
        <p>...</p> 
    </li>
    <li>...</li>
</ol>

I would like to add something to brilliant @AmiNadimi answer for everyone who going implement his solution in .NET Core 3:

First of all, you should change signature of SignIn method in UserManager class from:

public async void SignIn(HttpContext httpContext, UserDbModel user, bool isPersistent = false)

to:

public async Task SignIn(HttpContext httpContext, UserDbModel user, bool isPersistent = false)

It's because you should never use async void, especially if you work with HttpContext. Source: Microsoft Docs

The last, but not least, your Configure() method in Startup.cs should contains app.UseAuthorization and app.UseAuthentication in proper order:

if (env.IsDevelopment())
{
    app.UseDeveloperExceptionPage();
}
else
{
    app.UseExceptionHandler("/Home/Error");
    // The default HSTS value is 30 days. You may want to change this for production scenarios, see https://aka.ms/aspnetcore-hsts.
    app.UseHsts();
}

app.UseHttpsRedirection();
app.UseStaticFiles();
app.UseAuthentication();
app.UseRouting();
app.UseAuthorization();
app.UseEndpoints(endpoints =>
{
    endpoints.MapControllerRoute(
        name: "default",
        pattern: "{controller=Home}/{action=Index}/{id?}");
});

Try doing this :

awk '{print substr($0, 1, length($0)-1)}' file.txt

This is more generic than just removing the final comma but any last character

If you'd want to only remove the last comma with awk :

awk '{gsub(/,$/,""); print}' file.txt

You can use GetCustomAttributesData() and GetCustomAttributes():

var attributeData = typeof(Book).GetProperty("Name").GetCustomAttributesData();
var attributes = typeof(Book).GetProperty("Name").GetCustomAttributes(false);

Renders a view and sends the rendered HTML string to the client.

res.render('index');

Or

res.render('index', function(err, html) {
  if(err) {...}
  res.send(html);
});

DOCS HERE: https://expressjs.com/en/api.html#res.render

The following syntax can also be used if the array is not named (just the array is passed to the template):

  <ul id="luke_should_be_here">
  {{this.1.name}}
  </ul>

You're very close, the problem is you're comparing a DateTime to a TimeOfDay. What you need to do is add the .TimeOfDay property to the end of your Convert.ToDateTime() functions.

You have a character = STQ8QGpaM4CU6149665!7084880820, and you have a another column = 7084880820.

If you want to get only this in excel using the formula: STQ8QGpaM4CU6149665!, use this:

=REPLACE(H11,SEARCH(J11,H11),LEN(J11),"")

H11 is an old character and for starting number use search option then for no of character needs to replace use len option then replace to new character. I am replacing this to blank.

Description

Assuming i understand your question.

You can get the selected row using the DataGridView.SelectedRows Collection. If your DataGridView allows only one selected, have a look at my sample.

DataGridView.SelectedRows Gets the collection of rows selected by the user.

Sample

if (dataGridView1.SelectedRows.Count != 0)
{
    DataGridViewRow row = this.dataGridView1.SelectedRows[0];
    row.Cells["ColumnName"].Value
}

More Information

• MSDN - DataGridView.SelectedRows Property

The answer's here, I think.

It's better if you do git rm <fileName>, though.

add below code in your < a > TAG

data-toggle="collapse" data-target=".navbar-collapse.show"

as shows below in every TAG

<li class="nav-item">
   <a class="nav-link" href="#about-us" data-toggle="collapse" data-target=".navbar-collapse.show">About</a>
</li>

My problem was that the Id of the table is not AUTO_INCREMENT and I was trying to add range.

I used this statement and it worked for me:

   setListAdapter(null)

This one calls a default constructor that does nothing in a class extends BaseAdapter.

The <button> element, when placed in a form, will submit the form automatically unless otherwise specified. You can use the following 2 strategies:

1. Use <button type="button"> to override default submission behavior
2. Use event.preventDefault() in the onSubmit event to prevent form submission

Solution 1:

• Advantage: simple change to markup
• Disadvantage: subverts default form behavior, especially when JS is disabled. What if the user wants to hit "enter" to submit?

Insert extra type attribute to your button markup:

<button id="button" type="button" value="send" class="btn btn-primary">Submit</button>

Solution 2:

• Advantage: form will work even when JS is disabled, and respects standard form UI/UX such that at least one button is used for submission

Prevent default form submission when button is clicked. Note that this is not the ideal solution because you should be in fact listening to the submit event, not the button click event:

$(document).ready(function () {
  // Listen to click event on the submit button
  $('#button').click(function (e) {

    e.preventDefault();

    var name = $("#name").val();
    var email = $("#email").val();

    $.post("process.php", {
      name: name,
      email: email
    }).complete(function() {
        console.log("Success");
      });
  });
});

Better variant:

In this improvement, we listen to the submit event emitted from the <form> element:

$(document).ready(function () {
  // Listen to submit event on the <form> itself!
  $('#main').submit(function (e) {

    e.preventDefault();

    var name = $("#name").val();
    var email = $("#email").val();

    $.post("process.php", {
      name: name,
      email: email
    }).complete(function() {
        console.log("Success");
      });
  });
});

Even better variant: use .serialize() to serialize your form, but remember to add name attributes to your input:

The name attribute is required for .serialize() to work, as per jQuery's documentation:

For a form element's value to be included in the serialized string, the element must have a name attribute.

<input type="text" id="name" name="name" class="form-control mb-2 mr-sm-2 mb-sm-0" id="inlineFormInput" placeholder="Jane Doe">
<input type="text" id="email" name="email" class="form-control" id="inlineFormInputGroup" placeholder="[email protected]">

And then in your JS:

$(document).ready(function () {
  // Listen to submit event on the <form> itself!
  $('#main').submit(function (e) {

    // Prevent form submission which refreshes page
    e.preventDefault();

    // Serialize data
    var formData = $(this).serialize();

    // Make AJAX request
    $.post("process.php", formData).complete(function() {
      console.log("Success");
    });
  });
});

In my case eclipse is not showing parent class function on $this, so I perform below mention points and it starts works:-

I go to my /var/www/ folder and check for .metadata folder (Here check the .log file and it shows) Resource is out of sync with the file system: 1. Go to Eclipse --> Project --> Clean 2. Windows -- preferences --> General --> Workspace --> And set it to "Refresh Automatically"

After that boom - things gets start working :)

If you want to load variables from other files too then ado this :- Eclipse-->Windows-->Preferences-->Php-->Editor-->Content Assist --> and check "show variable from other files"

Then it will show element , variables and other functions also.

php artisan migrate --path=database/migrations/2020_04_10_130703_create_test_table.php

note: after --path no / before

I could not get mongoexport to do this for me. I found that,to get an exhaustive list of all the fields, you need to loop through the entire collection once. Use this to generate the headers. Then loop through the collection again to populate these headers for each document.

I've written a script to do just this. Converting MongoDB docs to csv irrespective of schema differences between individual documents.

https://github.com/surya-shodan/mongoexportcsv

If you don't want to implement IEquatable, you can always use Reflection to compare all the properties: - if they're value type, just compare them -if they are reference type, call the function recursively to compare its "inner" properties.

I'm not thinking about performace, but about simplicity. It depends, however on the exact design of your objects. It could get complicated depending on your objects shape (for example if there are cyclic dependencies between properties). There are, however, several solutions out there that you can use, like this one:

• Compare .NET objects

Another option is to serialize the object as text, for example using JSON.NET, and comparing the serialization result. (JSON.NET can handle Cyclic dependencies between properties).

I don't know if by fastest you mean the fastest way to implement it or a code that runs fast. You should not optimize before knowing if you need to. Premature optimization is the root of all evil

You simply combine the ideas of a link to another page, as with href=foo.html, and a link to an element on the same page, as with href=#bar, so that the fragment like #bar is written immediately after the URL that refers to another page:

<a href="foo.html#bar">Some nice link text</a>

The target is specified the same was as when linking inside one page, e.g.

<div id="bar">
<h2>Some heading</h2>
Some content
</div>

or (if you really want to link specifically to a heading only)

<h2 id="bar">Some heading</h2>

Try to use jpg and png , also name your image in lowercase. Then drag and drop the image in res/drawable . then go to file and click save all . close eclipse then reopen it again . That is what worked for me .

Use the String.split()

var array = string.split(',');

try to use li can be more even

<ul>
 <li><a href="#one"  data-role="button" role="button">back</a></li>
 </ul>

I don't think it's enough merely to get the response. I think you need to read it (get the entity and read it via EntityUtils.consume()).

e.g. (from the doc)

     System.out.println("<< Response: " + response.getStatusLine());
     System.out.println(EntityUtils.toString(response.getEntity()));

v = alli.max()
index = alli.argmax()
x, y = index/8, index%8

You need to download this from Microsoft: http://www.microsoft.com/en-us/download/details.aspx?id=7435.

The tool is called "Microsoft URL Rewrite Module 2.0 for IIS 7" and is described as follows by Microsoft: "URL Rewrite Module 2.0 provides a rule-based rewriting mechanism for changing requested URL’s before they get processed by web server and for modifying response content before it gets served to HTTP clients"

Try this, just an example:

u.UserTypeOptions = new SelectList(new[]
    {
        new { ID="1", Name="name1" },
        new { ID="2", Name="name2" },
        new { ID="3", Name="name3" },
    }, "ID", "Name", 1);

Or

u.UserTypeOptions = new SelectList(new List<SelectListItem>
    {
        new SelectListItem { Selected = true, Text = string.Empty, Value = "-1"},
        new SelectListItem { Selected = false, Text = "Homeowner", Value = "2"},
        new SelectListItem { Selected = false, Text = "Contractor", Value = "3"},
    },"Value","Text");

I've found that there will be a new version of npm 5.7.1 with the new command npm ci, that will install from package-lock.json only

The new npm ci command installs from your lock-file ONLY. If your package.json and your lock-file are out of sync then it will report an error.

It works by throwing away your node_modules and recreating it from scratch.

Beyond guaranteeing you that you'll only get what is in your lock-file it's also much faster (2x-10x!) than npm install when you don't start with a node_modules.

As you may take from the name, we expect it to be a big boon to continuous integration environments. We also expect that folks who do production deploys from git tags will see major gains.

The parent of the row is not the object you think, this is what I understand from the error.
Try detecting the parent of the row first, then you can be sure what to write into getElementById part of the parent.

I might be ungraving a dead topic but a simple solution is to check in your dependencies (Maven's pom for exemple) if you are including logback-core and logback-classic.

Slf4j is just the interface, you need the concrete implementation behind it to work.

I've been tricked twice with IDEA messing it up, now I'm good to go :D

If you want to call the main method of another class you can do it this way assuming I understand the question.

public class MyClass {

    public static void main(String[] args) {

        System.out.println("main() method of MyClass");
        OtherClass obj = new OtherClass();
    }
}

class OtherClass {

    public OtherClass() {

        // Call the main() method of MyClass
        String[] arguments = new String[] {"123"};
        MyClass.main(arguments);
    }
}

I have solved this problem like.

if($_SERVER['REQUEST_METHOD'] == 'OPTIONS' && ENV == 'devel') {
    header('Access-Control-Allow-Origin: *');
    header('Access-Control-Allow-Headers: X-Requested-With');
    header("HTTP/1.1 200 OK");
    die();
}

It is only for development. With this I am waiting 9ms and 500ms and not 8s and 500ms. I can do that because production JS app will be on the same machine as production so there will be no OPTIONS but development is my local.

To fix the core question, "how should I detect that these two variables don't have the same value when one of them is null?", I don't like the approach of nvl(my_column, 'some value that will never, ever, ever appear in the data and I can be absolutely sure of that') because you can't always guarantee that a value won't appear... especially with NUMBERs.

I have used the following:

if (str1 is null) <> (str2 is null) or str1 <> str2 then
  dbms_output.put_line('not equal');
end if;

Disclaimer: I am not an Oracle wizard and I came up with this one myself and have not seen it elsewhere, so there may be some subtle reason why it's a bad idea. But it does avoid the trap mentioned by APC, that comparing a null to something else gives neither TRUE nor FALSE but NULL. Because the clauses (str1 is null) will always return TRUE or FALSE, never null.

(Note that PL/SQL performs short-circuit evaluation, as noted here.)

If you would like to use awk then this would work too

awk -F= '{$2="xxx";print}' OFS="\=" filename

With respect to those special characters not being taken into account by simpler checks such as /[a-zA-Z]/.test(c), it can be beneficial to leverage ECMAScript case transformation (toUpperCase). It will take into account non-ASCII Unicode character classes of some foreign alphabets.

function isLetter(c) {
  return c.toLowerCase() != c.toUpperCase();
}

NOTE: this solution will work only for most Latin, Greek, Armenian and Cyrillic scripts. It will NOT work for Chinese, Japanese, Arabic, Hebrew and most other scripts.

I ran into this issue running Android Studio 1.4. In the Android Virtual Device (AVD) Manager, I had checked the 'Use Host GPU' box, thinking this would give me some sort of boost in the emulator's speed.
Android Studio will let you choose a device that's configured that way, and it will show you the command it used to start the virtual device:

but for some reason, it doesn't warn you that the program crashed, and it doesn't show you the stderr message that you would see had you run it from the command line yourself:

When I ran it from Android Studio, I didn't see the dialog box in the screenshot above, though it shows up just fine when you run the command from the command line, so I just sat there patiently for a few minutes while nothing happened.
As pointed out elsewhere, the drivers needed for the Use Host GPU option are not yet available. Reading through that post, it appears that this setting can be used with some Intel CPUs but not the ARM chip I chose (see CPU/ABI setting below).

My solution was to just uncheck the "Use Host GPU" box which is near the bottom of the window opened through the 'edit' option after choosing the virtual device in the Android Virtual Devices tab in the AVD Manager. You can get to the AVD manager directly in Windows at
%ANDROID_HOME%\AVD Manager.exe
where in my Windows 8 install, %ANDROID_HOME% resolved to
c:\users\myusername\AppData\Local\Android\Sdk

I don't have it running on Linux at the moment, but I'd assume it's in a similar path there, i.e.:
${ANDROID_HOME}/

After unchecking the 'Use Host GPU' box, I opted to check the 'Snapshot' box next to it (as I understand, that stores a copy of the already-built vm so it doesn't need to get rebuilt every time, which should save some startup time for future instances). Here are the full settings I used:

it works well on Edge and Chrome:

  width: fit-content;
  height: fit-content;

I had this problem too. I just set my deployment target to 4.3 and left only armv7 architecture and it worked. At point almost everyone has 5, so 4.3 is fine.

It's easy to use, I think. https://stackoverflow.com/a/32245370/4365315

var A = {a:11, b:22}, 
enumA = new TypeHelper(A);

if(enumA.Value === A.b || enumA.Key === "a"){ 
... 
}

var keys = enumA.getAsList();//[object, object]

//set
enumA.setType(22, false);//setType(val, isKey)

enumA.setType("a", true);

enumA.setTypeByIndex(1);

UPDATE:

There is my helper codes(TypeHelper).

var Helper = {_x000D_
    isEmpty: function (obj) {_x000D_
        return !obj || obj === null || obj === undefined || Array.isArray(obj) && obj.length === 0;_x000D_
    },_x000D_
_x000D_
    isObject: function (obj) {_x000D_
        return (typeof obj === 'object');_x000D_
    },_x000D_
_x000D_
    sortObjectKeys: function (object) {_x000D_
        return Object.keys(object)_x000D_
            .sort(function (a, b) {_x000D_
                c = a - b;_x000D_
                return c_x000D_
            });_x000D_
    },_x000D_
    containsItem: function (arr, item) {_x000D_
        if (arr && Array.isArray(arr)) {_x000D_
            return arr.indexOf(item) > -1;_x000D_
        } else {_x000D_
            return arr === item;_x000D_
        }_x000D_
    },_x000D_
_x000D_
    pushArray: function (arr1, arr2) {_x000D_
        if (arr1 && arr2 && Array.isArray(arr1)) {_x000D_
            arr1.push.apply(arr1, Array.isArray(arr2) ? arr2 : [arr2]);_x000D_
        }_x000D_
    }_x000D_
};_x000D_
function TypeHelper() {_x000D_
    var _types = arguments[0],_x000D_
        _defTypeIndex = 0,_x000D_
        _currentType,_x000D_
        _value,_x000D_
        _allKeys = Helper.sortObjectKeys(_types);_x000D_
_x000D_
    if (arguments.length == 2) {_x000D_
        _defTypeIndex = arguments[1];_x000D_
    }_x000D_
_x000D_
    Object.defineProperties(this, {_x000D_
        Key: {_x000D_
            get: function () {_x000D_
                return _currentType;_x000D_
            },_x000D_
            set: function (val) {_x000D_
                _currentType.setType(val, true);_x000D_
            },_x000D_
            enumerable: true_x000D_
        },_x000D_
        Value: {_x000D_
            get: function () {_x000D_
                return _types[_currentType];_x000D_
            },_x000D_
            set: function (val) {_x000D_
                _value.setType(val, false);_x000D_
            },_x000D_
            enumerable: true_x000D_
        }_x000D_
    });_x000D_
    this.getAsList = function (keys) {_x000D_
        var list = [];_x000D_
        _allKeys.forEach(function (key, idx, array) {_x000D_
            if (key && _types[key]) {_x000D_
_x000D_
                if (!Helper.isEmpty(keys) && Helper.containsItem(keys, key) || Helper.isEmpty(keys)) {_x000D_
                    var json = {};_x000D_
                    json.Key = key;_x000D_
                    json.Value = _types[key];_x000D_
                    Helper.pushArray(list, json);_x000D_
                }_x000D_
            }_x000D_
        });_x000D_
        return list;_x000D_
    };_x000D_
_x000D_
    this.setType = function (value, isKey) {_x000D_
        if (!Helper.isEmpty(value)) {_x000D_
            Object.keys(_types).forEach(function (key, idx, array) {_x000D_
                if (Helper.isObject(value)) {_x000D_
                    if (value && value.Key == key) {_x000D_
                        _currentType = key;_x000D_
                    }_x000D_
                } else if (isKey) {_x000D_
                    if (value && value.toString() == key.toString()) {_x000D_
                        _currentType = key;_x000D_
                    }_x000D_
                } else if (value && value.toString() == _types[key]) {_x000D_
                    _currentType = key;_x000D_
                }_x000D_
            });_x000D_
        } else {_x000D_
            this.setDefaultType();_x000D_
        }_x000D_
        return isKey ? _types[_currentType] : _currentType;_x000D_
    };_x000D_
_x000D_
    this.setTypeByIndex = function (index) {_x000D_
        for (var i = 0; i < _allKeys.length; i++) {_x000D_
            if (index === i) {_x000D_
                _currentType = _allKeys[index];_x000D_
                break;_x000D_
            }_x000D_
        }_x000D_
    };_x000D_
_x000D_
    this.setDefaultType = function () {_x000D_
        this.setTypeByIndex(_defTypeIndex);_x000D_
    };_x000D_
_x000D_
    this.setDefaultType();_x000D_
}_x000D_
_x000D_
var TypeA = {_x000D_
    "-1": "Any",_x000D_
    "2": "2L",_x000D_
    "100": "100L",_x000D_
    "200": "200L",_x000D_
    "1000": "1000L"_x000D_
};_x000D_
_x000D_
var enumA = new TypeHelper(TypeA, 4);_x000D_
_x000D_
document.writeln("Key = ", enumA.Key,", Value = ", enumA.Value, "<br>");_x000D_
_x000D_
_x000D_
enumA.setType("200L", false);_x000D_
document.writeln("Key = ", enumA.Key,", Value = ", enumA.Value, "<br>");_x000D_
_x000D_
enumA.setDefaultType();_x000D_
document.writeln("Key = ", enumA.Key,", Value = ", enumA.Value, "<br>");_x000D_
_x000D_
_x000D_
enumA.setTypeByIndex(1);_x000D_
document.writeln("Key = ", enumA.Key,", Value = ", enumA.Value, "<br>");_x000D_
_x000D_
document.writeln("is equals = ", (enumA.Value == TypeA["2"]));

Remove *%,&@! from below string:

s = "this is my string,  and i will * remove * these ** %% "
new_string = s.translate(s.maketrans('','','*%,&@!'))
print(new_string)

# output: this is my string  and i will  remove  these  

You have 2 choices:

1) Either specify the column name list (without the identity column).

2) SET IDENTITY_INSERT tablename ON, followed by insert statements that provide explicit values for the identity column, followed by SET IDENTITY_INSERT tablename OFF.

If you are avoiding a column name list, perhaps this 'trick' might help?:

-- Get a comma separated list of a table's column names
SELECT STUFF(
(SELECT 
',' + COLUMN_NAME AS [text()]
FROM 
INFORMATION_SCHEMA.COLUMNS
WHERE 
TABLE_NAME = 'TableName'
Order By Ordinal_position
FOR XML PATH('')
), 1,1, '')

Since mysql_connect has been deprecated, connect and query instead with mysqli:

$mysqli = new mysqli("hostname","username","password","database_name");
$sqlSelect="SELECT your_fieldname FROM your_table";
$result = $mysqli -> query ($sqlSelect);

And then, if you have more than one option list with the same values on the same page, put the values in an array:

while ($row = mysqli_fetch_array($result)) {
    $rows[] = $row;
}

And then you can loop the array multiple times on the same page:

foreach ($rows as $row) {
    print "<option value='" . $row['your_fieldname'] . "'>" . $row['your_fieldname'] . "</option>";
}

Use the Set type:

A_set = Set([6,7,8,9,10,11,12])
subset_of_A_set = Set([6,9,12])

result = A_set - subset_of_A_set

Here is a JavaScript function that adds specified number of paddings with custom symble. the function takes three parameters.

    padMe --> string or number to left pad
    pads  --> number of pads
    padSymble --> custom symble, default is "0" 

    function leftPad(padMe, pads, padSymble) {
         if( typeof padMe === "undefined") {
             padMe = "";
         }
         if (typeof pads === "undefined") {
             pads = 0;
         }
         if (typeof padSymble === "undefined") {
             padSymble = "0";
         }

         var symble = "";
         var result = [];
         for(var i=0; i < pads ; i++) {
            symble += padSymble;
         }
        var length = symble.length - padMe.toString().length;
        result = symble.substring(0, length);
        return result.concat(padMe.toString());
    }

/* Here are some results:

> leftPad(1)
"1"
> leftPad(1, 4)
"0001"
> leftPad(1, 4, "0")
"0001"
> leftPad(1, 4, "@")
"@@@1"

*/

On my case clearing buildpacks worked heroku buildpacks:clear

Just use mysql_query (or mysqli_query, even better, or use PDO, best of all) with:

SELECT DATABASE() FROM DUAL;

Addendum:

There is much discussion over whether or not FROM DUAL should be included in this or not. On a technical level, it is a holdover from Oracle and can safely be removed. If you are inclined, you can use the following instead:

SELECT DATABASE();

That said, it is perhaps important to note, that while FROM DUAL does not actually do anything, it is valid MySQL syntax. From a strict perspective, including braces in a single line conditional in JavaScript also does not do anything, but it is still a valid practice.

Though this is not directly related to the OP's exact question but I just found out that using a Oracle reserved word in your query (in my case the alias IN) can cause the same error.

Example:

SELECT * FROM TBL_INDEPENTS IN
JOIN TBL_VOTERS VO on IN.VOTERID = VO.VOTERID

Or if its in the query itself as a field name

 SELECT ..., ...., IN, ..., .... FROM SOMETABLE

That would also throw that error. I hope this helps someone.

Another solution is:

svn st | awk '/^?/{print $2}' > svnignore.txt && svn propget svn:ignore >> svnignore.txt && svn propset svn:ignore -F svnignore.txt . && rm svnignore.txt

or line by line

svn st | awk '/^?/{print $2}' > svnignore.txt 
svn propget svn:ignore >> svnignore.txt 
svn propset svn:ignore -F svnignore.txt . 
rm svnignore.txt

What it does:

1. Gets the status files from the svn
2. Saves all files with ? to the file "svnignore.txt"
3. Gets the already ignored files and appends them to the file "svnignore.txt"
4. Tells the svn to ignore the files in "svnignore.txt"
5. Removes the file

To select the right location provider for your app, you can use Criteria objects:

Criteria myCriteria = new Criteria();
myCriteria.setAccuracy(Criteria.ACCURACY_HIGH);
myCriteria.setPowerRequirement(Criteria.POWER_LOW);
// let Android select the right location provider for you
String myProvider = locationManager.getBestProvider(myCriteria, true); 

// finally require updates at -at least- the desired rate
long minTimeMillis = 600000; // 600,000 milliseconds make 10 minutes
locationManager.requestLocationUpdates(myProvider,minTimeMillis,0,locationListener); 

Read the documentation for requestLocationUpdates for more details on how the arguments are taken into account:

The frequency of notification may be controlled using the minTime and minDistance parameters. If minTime is greater than 0, the LocationManager could potentially rest for minTime milliseconds between location updates to conserve power. If minDistance is greater than 0, a location will only be broadcasted if the device moves by minDistance meters. To obtain notifications as frequently as possible, set both parameters to 0.

More thoughts

• You can monitor the accuracy of the Location objects with Location.getAccuracy(), which returns the estimated accuracy of the position in meters.
• the Criteria.ACCURACY_HIGH criterion should give you errors below 100m, which is not as good as GPS can be, but matches your needs.
• You also need to monitor the status of your location provider, and switch to another provider if it gets unavailable or disabled by the user.
• The passive provider may also be a good match for this kind of application: the idea is to use location updates whenever they are requested by another app and broadcast systemwide.

\usepackage{array} in the preamble

then this:

\begin{tabular}{| >{\centering\arraybackslash}m{1in} | >{\centering\arraybackslash}m{1in} |}

note that the "m" for fixed with column is provided by the array package, and will give you vertical centering (if you don't want this just go back to "p"

Static libraries increase the size of the code in your binary. They're always loaded and whatever version of the code you compiled with is the version of the code that will run.

Dynamic libraries are stored and versioned separately. It's possible for a version of the dynamic library to be loaded that wasn't the original one that shipped with your code if the update is considered binary compatible with the original version.

Additionally dynamic libraries aren't necessarily loaded -- they're usually loaded when first called -- and can be shared among components that use the same library (multiple data loads, one code load).

Dynamic libraries were considered to be the better approach most of the time, but originally they had a major flaw (google DLL hell), which has all but been eliminated by more recent Windows OSes (Windows XP in particular).

You should stick to the NSInteger data types when possible. So you'd create the number like that:

NSInteger myValue = 1;
NSNumber *number = [NSNumber numberWithInteger: myValue];

Decoding works with the integerValue method then:

NSInteger value = [number integerValue];

Check if you have "https://rubygems.org/" as a source to find gems at:

$ gem sources
*** CURRENT SOURCES ***

https://rubygems.org/

If not, you should be able to add it with

$ gem sources --add https://rubygems.org/
https://rubygems.org/ added to sources

Here are docs for the gem source command.

Take a look at this example: MDN Element.scrollHeight

I recommend that check out this example: stackoverflow.com/a/24815216... which implements a cross-browser handling for the scroll action.

You may use the following snippet:

//attaches the "scroll" event
$(window).scroll(function (e) {
    var target = e.currentTarget,
        scrollTop = target.scrollTop || window.pageYOffset,
        scrollHeight = target.scrollHeight || document.body.scrollHeight;
    if (scrollHeight - scrollTop === $(target).innerHeight()) {
      console.log("? End of scroll");
    }
});

For whatever reason, the Scanner class also issues this same exception if it encounters special characters it cannot read. Beyond using the hasNextLine() method before each call to nextLine(), make sure the correct encoding is passed to the Scanner constructor, e.g.:

Scanner scanner = new Scanner(new FileInputStream(filePath), "UTF-8");

So anyway... I took onokazu's code (thanks!) and added the ability to have repeated tags in XML, it also supports attributes, hope someone finds it useful!

 <?php

function array_to_xml(array $arr, SimpleXMLElement $xml) {
        foreach ($arr as $k => $v) {

            $attrArr = array();
            $kArray = explode(' ',$k);
            $tag = array_shift($kArray);

            if (count($kArray) > 0) {
                foreach($kArray as $attrValue) {
                    $attrArr[] = explode('=',$attrValue);                   
                }
            }

            if (is_array($v)) {
                if (is_numeric($k)) {
                    array_to_xml($v, $xml);
                } else {
                    $child = $xml->addChild($tag);
                    if (isset($attrArr)) {
                        foreach($attrArr as $attrArrV) {
                            $child->addAttribute($attrArrV[0],$attrArrV[1]);
                        }
                    }                   
                    array_to_xml($v, $child);
                }
            } else {
                $child = $xml->addChild($tag, $v);
                if (isset($attrArr)) {
                    foreach($attrArr as $attrArrV) {
                        $child->addAttribute($attrArrV[0],$attrArrV[1]);
                    }
                }
            }               
        }

        return $xml;
    }

        $test_array = array (
          'bla' => 'blub',
          'foo' => 'bar',
          'another_array' => array (
            array('stack' => 'overflow'),
            array('stack' => 'overflow'),
            array('stack' => 'overflow'),
          ),
          'foo attribute1=value1 attribute2=value2' => 'bar',
        );  

        $xml = array_to_xml($test_array, new SimpleXMLElement('<root/>'))->asXML();

        echo "$xml\n";
        $dom = new DOMDocument;
        $dom->preserveWhiteSpace = FALSE;
        $dom->loadXML($xml);
        $dom->formatOutput = TRUE;
        echo $dom->saveXml();
    ?>

I was stucked with this problem for a long time (CORS does not work in FF, but works in Chrome and others). No advice could help. Finally, i found that my local dev subdomain (like sub.example.dev) was not explicitly mentioned in /etc/hosts, thus FF just is not able to find it and shows confusing error message 'Aborted...' in dev tools panel.

Putting the exact subdomain into my local /etc/hosts fixed the problem. /etc/hosts is just a plain-text file in unix systems, so you can open it under the root user and put your subdomain in front of '127.0.0.1' ip address.

The URL structure you're referring to is called the REST endpoint, as opposed to the Web Site Endpoint.

Note: Since this answer was originally written, S3 has rolled out dualstack support on REST endpoints, using new hostnames, while leaving the existing hostnames in place. This is now integrated into the information provided, below.

If your bucket is really in the us-east-1 region of AWS -- which the S3 documentation formerly referred to as the "US Standard" region, but was subsequently officially renamed to the "U.S. East (N. Virginia) Region" -- then http://s3-us-east-1.amazonaws.com/bucket/ is not the correct form for that endpoint, even though it looks like it should be. The correct format for that region is either http://s3.amazonaws.com/bucket/ or http://s3-external-1.amazonaws.com/bucket/.¹

The format you're using is applicable to all the other S3 regions, but not US Standard US East (N. Virginia) [us-east-1].

S3 now also has dual-stack endpoint hostnames for the REST endpoints, and unlike the original endpoint hostnames, the names of these have a consistent format across regions, for example s3.dualstack.us-east-1.amazonaws.com. These endpoints support both IPv4 and IPv6 connectivity and DNS resolution, but are otherwise functionally equivalent to the existing REST endpoints.

If your permissions and configuration are set up such that the web site endpoint works, then the REST endpoint should work, too.

However... the two endpoints do not offer the same functionality.

Roughly speaking, the REST endpoint is better-suited for machine access and the web site endpoint is better suited for human access, since the web site endpoint offers friendly error messages, index documents, and redirects, while the REST endpoint doesn't. On the other hand, the REST endpoint offers HTTPS and support for signed URLs, while the web site endpoint doesn't.

Choose the correct type of endpoint (REST or web site) for your application:

http://docs.aws.amazon.com/AmazonS3/latest/dev/WebsiteEndpoints.html#WebsiteRestEndpointDiff

¹ s3-external-1.amazonaws.com has been referred to as the "Northern Virginia endpoint," in contrast to the "Global endpoint" s3.amazonaws.com. It was unofficially possible to get read-after-write consistency on new objects in this region if the "s3-external-1" hostname was used, because this would send you to a subset of possible physical endpoints that could provide that functionality. This behavior is now officially supported on this endpoint, so this is probably the better choice in many applications. Previously, s3-external-2 had been referred to as the "Pacific Northwest endpoint" for US-Standard, though it is now a CNAME in DNS for s3-external-1 so s3-external-2 appears to have no purpose except backwards-compatibility.

try using ConnectivityManager

ConnectivityManager connectivity = (ConnectivityManager) context.getSystemService(Context.CONNECTIVITY_SERVICE);
    if (connectivity != null) {
        NetworkInfo[] info = connectivity.getAllNetworkInfo();
        if (info != null) {
            for (int i = 0; i < info.length; i++) {
                if (info[i].getState() == NetworkInfo.State.CONNECTED) {
                    return true;
                }
            }
        }
    }
 return false

Also Add permission to AndroidManifest.xml

<uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" />

Struggling for hours, couldn't afford for more.

The solution that worked for me in less than 3 minutes was:

npm install axios

Code ended up even shorter:

const url = `${this.env.someMicroservice.address}/v1/my-end-point`;

const { data } = await axios.get<MyInterface[]>(url, {
  auth: {
    username: this.env.auth.user,
    password: this.env.auth.pass
  }
});

return data;

I have found the following algorithm very clear and simple:

def get_powerset(some_list):
    """Returns all subsets of size 0 - len(some_list) for some_list"""
    if len(some_list) == 0:
        return [[]]

    subsets = []
    first_element = some_list[0]
    remaining_list = some_list[1:]
    # Strategy: get all the subsets of remaining_list. For each
    # of those subsets, a full subset list will contain both
    # the original subset as well as a version of the subset
    # that contains first_element
    for partial_subset in get_powerset(remaining_list):
        subsets.append(partial_subset)
        subsets.append(partial_subset[:] + [first_element])

    return subsets

Another way one can generate the powerset is by generating all binary numbers that have n bits. As a power set the amount of number with n digits is 2 ^ n. The principle of this algorithm is that an element could be present or not in a subset as a binary digit could be one or zero but not both.

def power_set(items):
    N = len(items)
    # enumerate the 2 ** N possible combinations
    for i in range(2 ** N):
        combo = []
        for j in range(N):
            # test bit jth of integer i
            if (i >> j) % 2 == 1:
                combo.append(items[j])
        yield combo

I found both algorithms when I was taking MITx: 6.00.2x Introduction to Computational Thinking and Data Science, and I consider it is one of the easiest algorithms to understand I have seen.

HashMap is used for fast lookup, whereas TreeMap is used for sorted iterations over the map.

I've used this function to merge objects in the past, I use it to add or update existing properties on obj1 with values from obj2:

var _mergeRecursive = function(obj1, obj2) {

      //iterate over all the properties in the object which is being consumed
      for (var p in obj2) {
          // Property in destination object set; update its value.
          if ( obj2.hasOwnProperty(p) && typeof obj1[p] !== "undefined" ) {
            _mergeRecursive(obj1[p], obj2[p]);

          } else {
            //We don't have that level in the heirarchy so add it
            obj1[p] = obj2[p];

          }
     }
}

It will handle multiple levels of hierarchy as well as single level objects. I used it as part of a utility library for manipulating JSON objects. You can find it here.

Because you didn't tell the linker about location of math library. Compile with gcc test.c -o test -lm

T represents an object type of, it implies that you can give any type of. IList : if IList s=new IList; Now s.add("Always accept string.").

You need a section in your file:

[My Section]
path1 = D:\test1\first
path2 = D:\test2\second
path3 = D:\test2\third

Then, read the properties:

import ConfigParser

config = ConfigParser.ConfigParser()
config.readfp(open(r'abc.txt'))
path1 = config.get('My Section', 'path1')
path2 = config.get('My Section', 'path2')
path3 = config.get('My Section', 'path3')

You can get it from the following way...!!

var rowId =$("#list").jqGrid('getGridParam','selrow');  
var rowData = jQuery("#list").getRowData(rowId);
var colData = rowData['UserId'];   // perticuler Column name of jqgrid that you want to access

Spark >= 2.3.0

SPARK-22614 exposes range partitioning.

val partitionedByRange = df.repartitionByRange(42, $"k")

partitionedByRange.explain
// == Parsed Logical Plan ==
// 'RepartitionByExpression ['k ASC NULLS FIRST], 42
// +- AnalysisBarrier Project [_1#2 AS k#5, _2#3 AS v#6]
// 
// == Analyzed Logical Plan ==
// k: string, v: int
// RepartitionByExpression [k#5 ASC NULLS FIRST], 42
// +- Project [_1#2 AS k#5, _2#3 AS v#6]
//    +- LocalRelation [_1#2, _2#3]
// 
// == Optimized Logical Plan ==
// RepartitionByExpression [k#5 ASC NULLS FIRST], 42
// +- LocalRelation [k#5, v#6]
// 
// == Physical Plan ==
// Exchange rangepartitioning(k#5 ASC NULLS FIRST, 42)
// +- LocalTableScan [k#5, v#6]

SPARK-22389 exposes external format partitioning in the Data Source API v2.

Spark >= 1.6.0

In Spark >= 1.6 it is possible to use partitioning by column for query and caching. See: SPARK-11410 and SPARK-4849 using repartition method:

val df = Seq(
  ("A", 1), ("B", 2), ("A", 3), ("C", 1)
).toDF("k", "v")

val partitioned = df.repartition($"k")
partitioned.explain

// scala> df.repartition($"k").explain(true)
// == Parsed Logical Plan ==
// 'RepartitionByExpression ['k], None
// +- Project [_1#5 AS k#7,_2#6 AS v#8]
//    +- LogicalRDD [_1#5,_2#6], MapPartitionsRDD[3] at rddToDataFrameHolder at <console>:27
// 
// == Analyzed Logical Plan ==
// k: string, v: int
// RepartitionByExpression [k#7], None
// +- Project [_1#5 AS k#7,_2#6 AS v#8]
//    +- LogicalRDD [_1#5,_2#6], MapPartitionsRDD[3] at rddToDataFrameHolder at <console>:27
// 
// == Optimized Logical Plan ==
// RepartitionByExpression [k#7], None
// +- Project [_1#5 AS k#7,_2#6 AS v#8]
//    +- LogicalRDD [_1#5,_2#6], MapPartitionsRDD[3] at rddToDataFrameHolder at <console>:27
// 
// == Physical Plan ==
// TungstenExchange hashpartitioning(k#7,200), None
// +- Project [_1#5 AS k#7,_2#6 AS v#8]
//    +- Scan PhysicalRDD[_1#5,_2#6]

Unlike RDDs Spark Dataset (including Dataset[Row] a.k.a DataFrame) cannot use custom partitioner as for now. You can typically address that by creating an artificial partitioning column but it won't give you the same flexibility.

Spark < 1.6.0:

One thing you can do is to pre-partition input data before you create a DataFrame

import org.apache.spark.sql.types._
import org.apache.spark.sql.Row
import org.apache.spark.HashPartitioner

val schema = StructType(Seq(
  StructField("x", StringType, false),
  StructField("y", LongType, false),
  StructField("z", DoubleType, false)
))

val rdd = sc.parallelize(Seq(
  Row("foo", 1L, 0.5), Row("bar", 0L, 0.0), Row("??", -1L, 2.0),
  Row("foo", -1L, 0.0), Row("??", 3L, 0.6), Row("bar", -3L, 0.99)
))

val partitioner = new HashPartitioner(5) 

val partitioned = rdd.map(r => (r.getString(0), r))
  .partitionBy(partitioner)
  .values

val df = sqlContext.createDataFrame(partitioned, schema)

Since DataFrame creation from an RDD requires only a simple map phase existing partition layout should be preserved*:

assert(df.rdd.partitions == partitioned.partitions)

The same way you can repartition existing DataFrame:

sqlContext.createDataFrame(
  df.rdd.map(r => (r.getInt(1), r)).partitionBy(partitioner).values,
  df.schema
)

So it looks like it is not impossible. The question remains if it make sense at all. I will argue that most of the time it doesn't:

1. Repartitioning is an expensive process. In a typical scenario most of the data has to be serialized, shuffled and deserialized. From the other hand number of operations which can benefit from a pre-partitioned data is relatively small and is further limited if internal API is not designed to leverage this property.

   • joins in some scenarios, but it would require an internal support,
   • window functions calls with matching partitioner. Same as above, limited to a single window definition. It is already partitioned internally though, so pre-partitioning may be redundant,
   • simple aggregations with GROUP BY - it is possible to reduce memory footprint of the temporary buffers**, but overall cost is much higher. More or less equivalent to groupByKey.mapValues(_.reduce) (current behavior) vs reduceByKey (pre-partitioning). Unlikely to be useful in practice.
   • data compression with SqlContext.cacheTable. Since it looks like it is using run length encoding, applying OrderedRDDFunctions.repartitionAndSortWithinPartitions could improve compression ratio.

2. Performance is highly dependent on a distribution of the keys. If it is skewed it will result in a suboptimal resource utilization. In the worst case scenario it will be impossible to finish the job at all.

3. A whole point of using a high level declarative API is to isolate yourself from a low level implementation details. As already mentioned by @dwysakowicz and @RomiKuntsman an optimization is a job of the Catalyst Optimizer. It is a pretty sophisticated beast and I really doubt you can easily improve on that without diving much deeper into its internals.

Related concepts

Partitioning with JDBC sources:

JDBC data sources support predicates argument. It can be used as follows:

sqlContext.read.jdbc(url, table, Array("foo = 1", "foo = 3"), props)

It creates a single JDBC partition per predicate. Keep in mind that if sets created using individual predicates are not disjoint you'll see duplicates in the resulting table.

partitionBy method in DataFrameWriter:

Spark DataFrameWriter provides partitionBy method which can be used to "partition" data on write. It separates data on write using provided set of columns

val df = Seq(
  ("foo", 1.0), ("bar", 2.0), ("foo", 1.5), ("bar", 2.6)
).toDF("k", "v")

df.write.partitionBy("k").json("/tmp/foo.json")

This enables predicate push down on read for queries based on key:

val df1 = sqlContext.read.schema(df.schema).json("/tmp/foo.json")
df1.where($"k" === "bar")

but it is not equivalent to DataFrame.repartition. In particular aggregations like:

val cnts = df1.groupBy($"k").sum()

will still require TungstenExchange:

cnts.explain

// == Physical Plan ==
// TungstenAggregate(key=[k#90], functions=[(sum(v#91),mode=Final,isDistinct=false)], output=[k#90,sum(v)#93])
// +- TungstenExchange hashpartitioning(k#90,200), None
//    +- TungstenAggregate(key=[k#90], functions=[(sum(v#91),mode=Partial,isDistinct=false)], output=[k#90,sum#99])
//       +- Scan JSONRelation[k#90,v#91] InputPaths: file:/tmp/foo.json

bucketBy method in DataFrameWriter (Spark >= 2.0):

bucketBy has similar applications as partitionBy but it is available only for tables (saveAsTable). Bucketing information can used to optimize joins:

// Temporarily disable broadcast joins
spark.conf.set("spark.sql.autoBroadcastJoinThreshold", -1)

df.write.bucketBy(42, "k").saveAsTable("df1")
val df2 = Seq(("A", -1.0), ("B", 2.0)).toDF("k", "v2")
df2.write.bucketBy(42, "k").saveAsTable("df2")

// == Physical Plan ==
// *Project [k#41, v#42, v2#47]
// +- *SortMergeJoin [k#41], [k#46], Inner
//    :- *Sort [k#41 ASC NULLS FIRST], false, 0
//    :  +- *Project [k#41, v#42]
//    :     +- *Filter isnotnull(k#41)
//    :        +- *FileScan parquet default.df1[k#41,v#42] Batched: true, Format: Parquet, Location: InMemoryFileIndex[file:/spark-warehouse/df1], PartitionFilters: [], PushedFilters: [IsNotNull(k)], ReadSchema: struct<k:string,v:int>
//    +- *Sort [k#46 ASC NULLS FIRST], false, 0
//       +- *Project [k#46, v2#47]
//          +- *Filter isnotnull(k#46)
//             +- *FileScan parquet default.df2[k#46,v2#47] Batched: true, Format: Parquet, Location: InMemoryFileIndex[file:/spark-warehouse/df2], PartitionFilters: [], PushedFilters: [IsNotNull(k)], ReadSchema: struct<k:string,v2:double>

* By partition layout I mean only a data distribution. partitioned RDD has no longer a partitioner. ** Assuming no early projection. If aggregation covers only small subset of columns there is probably no gain whatsoever.

In Macbook, step by step:

1. First of all open terminal and write it: cd ~/
2. Create your bash file: touch .bash_profile

You created your ".bash_profile" file but if you would like to edit it, you should write it;

3. Edit your bash profile: open -e .bash_profile

After you can save from top-left corner of screen: File > Save

@canerkaseler

The Set statement is only used for object variables (like Range, Cell or Worksheet in Excel), while the simple equal sign '=' is used for elementary datatypes like Integer. You can find a good explanation for when to use set here.

The other problem is, that your variable g1val isn't actually declared as Integer, but has the type Variant. This is because the Dim statement doesn't work the way you would expect it, here (see example below). The variable has to be followed by its type right away, otherwise its type will default to Variant. You can only shorten your Dim statement this way:

Dim intColumn As Integer, intRow As Integer  'This creates two integers

For this reason, you will see the "Empty" instead of the expected "0" in the Watches window.

Try this example to understand the difference:

Sub Dimming()

  Dim thisBecomesVariant, thisIsAnInteger As Integer
  Dim integerOne As Integer, integerTwo As Integer

  MsgBox TypeName(thisBecomesVariant)  'Will display "Empty"
  MsgBox TypeName(thisIsAnInteger )  'Will display "Integer"
  MsgBox TypeName(integerOne )  'Will display "Integer"
  MsgBox TypeName(integerTwo )  'Will display "Integer"

  'By assigning an Integer value to a Variant it becomes Integer, too
  thisBecomesVariant = 0
  MsgBox TypeName(thisBecomesVariant)  'Will display "Integer"

End Sub

Two further notices on your code:

First remark: Instead of writing

'If g1val is bigger than the value in the current cell
If g1val > Cells(33, i).Value Then
  g1val = g1val   'Don't change g1val
Else
  g1val = Cells(33, i).Value  'Otherwise set g1val to the cell's value
End If

you could simply write

'If g1val is smaller or equal than the value in the current cell
If g1val <= Cells(33, i).Value Then
  g1val = Cells(33, i).Value  'Set g1val to the cell's value 
End If

Since you don't want to change g1val in the other case.

Second remark: I encourage you to use Option Explicit when programming, to prevent typos in your program. You will then have to declare all variables and the compiler will give you a warning if a variable is unknown.

group by default order by pk id,so the result
username point avg_time
demo123 100 90 ---> id = 4
demo123456 100 100 ---> id = 7
demo 90 120 ---> id = 1

I found this on google, tested in Excel 2003 & it works for me:

=IF(COUNTIF(A1,"* *"),RIGHT(A1,LEN(A1)-LOOKUP(LEN(A1),FIND(" ",A1,ROW(INDEX($A:$A,1,1):INDEX($A:$A,LEN(A1),1))))),A1)

[edit] I don't have enough rep to comment, so this seems the best place...BradC's answer also doesn't work with trailing spaces or empty cells...
[2nd edit] actually, it doesn't work for single words either...

Shortest possible answer.

HTML

<a data-toggle="collapse" data-parent="#panel-quote-group" href="#collapseQuote">
    <span class="toggle-icon glyphicon glyphicon-collapse-up"></span>
</a>

JS:

<script type="text/javascript">
 $(function () {
     $('a[data-toggle="collapse"]').click(function () {
     $(this).find('span.toggle-icon').toggleClass('glyphicon-collapse-up glyphicon-collapse-down');
     })
 })
 </script>

And of course, you can use anything for a selector instead of anchor tag a and you can also use specific selector instead of this if your icon lies outside your clicked element.

At your model add this:

public function scopeRandomize($query, $limit = 3, $exclude = [])
{
    $query = $query->whereRaw('RAND()<(SELECT ((?/COUNT(*))*10) FROM `products`)', [$limit])->orderByRaw('RAND()')->limit($limit);
    if (!empty($exclude)) {
        $query = $query->whereNotIn('id', $exclude);
    }
    return $query;
}

then at route/controller

$data = YourModel::randomize(8)->get();

Another option, just for the heck of it would be:

if ( $('#myFav > *').length > 0 ) {
     // do something
}

May actually be the fastest since it strictly uses the Sizzle engine and not necessarily any jQuery, as it were. Could be wrong though. Nevertheless, it works.

The following worked for me after hours of trying

      $http.post("http://localhost:8080/yourresource", parameter, {headers: 
      {'Content-Type': 'application/json', 'Access-Control-Allow-Origin': '*' } }).

However following code did not work, I am unclear as to why, hopefully someone can improve this answer.

          $http({   method: 'POST', url: "http://localhost:8080/yourresource", 
                    parameter, 
                    headers: {'Content-Type': 'application/json', 
                              'Access-Control-Allow-Origin': '*',
                              'Access-Control-Allow-Methods': 'POST'} 
                })

Minimal settings to prevent resize events

form1.FormBorderStyle = FormBorderStyle.FixedDialog;
form1.MaximizeBox = false;

Actually openssl command is a better tool than curl for checking and debugging SSL. Here is an example with openssl:

openssl s_client -showcerts -connect stackoverflow.com:443 < /dev/null

and < /dev/null is for adding EOL to the STDIN otherwise it hangs on the Terminal.

But if you liked, you can wrap some useful openssl commands with curl (as I did with curly) and make it more human readable like so:

# check if SSL is valid
>>> curly --ssl valid -d stackoverflow.com
Verify return code: 0 (ok)
issuer=C = US
O = Let's Encrypt
CN = R3
subject=CN = *.stackexchange.com

option: ssl
action: valid
status: OK

# check how many days it will be valid 
>>> curly --ssl date -d stackoverflow.com
Verify return code: 0 (ok)
from: Tue Feb  9 16:13:16 UTC 2021
till: Mon May 10 16:13:16 UTC 2021
days total:  89
days passed: 8
days left:   81

option: ssl
action: date
status: OK

# check which names it supports
curly --ssl name -d stackoverflow.com
*.askubuntu.com
*.blogoverflow.com
*.mathoverflow.net
*.meta.stackexchange.com
*.meta.stackoverflow.com
*.serverfault.com
*.sstatic.net
*.stackexchange.com
*.stackoverflow.com
*.stackoverflow.email
*.superuser.com
askubuntu.com
blogoverflow.com
mathoverflow.net
openid.stackauth.com
serverfault.com
sstatic.net
stackapps.com
stackauth.com
stackexchange.com
stackoverflow.blog
stackoverflow.com
stackoverflow.email
stacksnippets.net
superuser.com

option: ssl
action: name
status: OK

# check the CERT of the SSL
>>> curly --ssl cert -d stackoverflow.com
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----

option: ssl
action: cert
status: OK

Another basic example:

NOT working:

var img = new Image;
img.onload = function() {
   this.myGlobalFunction(img);
};
img.src = reader.result;

Working:

var img = new Image;
img.onload = function() {
   this.myGlobalFunction(img);
}.bind(this);
img.src = reader.result;

So basically: just add .bind(this) to your function

First Install MinGW or other C/C++ compiler as it's required by Eclipse C++.

Use https://sourceforge.net/projects/mingw-w64/ as unbelievably the download.cnet.com's version has malware attached.

Back to Eclipse.

Now in all those path settings that the Eclipse Help manual talks about INSTEAD of typing the path, Select Variables and

**MINGW_HOME** 

and do so for all instances which would ask for the compiler's path.

First would be to click Preferences of the whatever project and C/C++ General then Paths and Symbols and add the

**MINGW_HOME** to those paths of for the compiler.

Next simply add the home directory to the Build Variables under the C++/C Build

Build Variables Screen Capture

You can also use the box-shadow property to simulate an underline.

Here is a fiddle. The idea is to use two layered box shadows to position the line in the same place as an underline.

a.underline {
    text-decoration: none;
    box-shadow: inset 0 -4px 0 0 rgba(255, 255, 255, 1), inset 0 -5px 0 0 rgba(255, 0, 0, 1);
}

This is a general answer for future visitors. The various ways to update the adapter data are explained. The process includes two main steps every time:

1. Update the data set
2. Notify the adapter of the change

#Insert single item

Add "Pig" at index 2.

String item = "Pig";
int insertIndex = 2;
data.add(insertIndex, item);
adapter.notifyItemInserted(insertIndex);

#Insert multiple items

Insert three more animals at index 2.

ArrayList<String> items = new ArrayList<>();
items.add("Pig");
items.add("Chicken");
items.add("Dog");
int insertIndex = 2;
data.addAll(insertIndex, items);
adapter.notifyItemRangeInserted(insertIndex, items.size());

#Remove a single item

Remove "Pig" from the list.

int removeIndex = 2;
data.remove(removeIndex);
adapter.notifyItemRemoved(removeIndex);

#Remove multiple items

Remove "Camel" and "Sheep" from the list.

int startIndex = 2; // inclusive
int endIndex = 4;   // exclusive
int count = endIndex - startIndex; // 2 items will be removed
data.subList(startIndex, endIndex).clear();
adapter.notifyItemRangeRemoved(startIndex, count);

#Remove all items

Clear the whole list.

data.clear();
adapter.notifyDataSetChanged();

#Replace old list with the new list

Clear the old list then add a new one.

// clear old list
data.clear();

// add new list
ArrayList<String> newList = new ArrayList<>();
newList.add("Lion");
newList.add("Wolf");
newList.add("Bear");
data.addAll(newList);

// notify adapter
adapter.notifyDataSetChanged();

The adapter has a reference to data, so it is important that I didn't set data to a new object. Instead, I cleared the old items from data and then added the new ones.

#Update single item

Change the "Sheep" item so that it says "I like sheep."

String newValue = "I like sheep.";
int updateIndex = 3;
data.set(updateIndex, newValue);
adapter.notifyItemChanged(updateIndex);

#Move single item

Move "Sheep" from position 3 to position 1.

int fromPosition = 3;
int toPosition = 1;

// update data array
String item = data.get(fromPosition);
data.remove(fromPosition);
data.add(toPosition, item);

// notify adapter
adapter.notifyItemMoved(fromPosition, toPosition);

#Code

Here is the project code for your reference. The RecyclerView Adapter code can be found at this answer.

MainActivity.java

public class MainActivity extends AppCompatActivity implements MyRecyclerViewAdapter.ItemClickListener {

    List<String> data;
    MyRecyclerViewAdapter adapter;

    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);

        // data to populate the RecyclerView with
        data = new ArrayList<>();
        data.add("Horse");
        data.add("Cow");
        data.add("Camel");
        data.add("Sheep");
        data.add("Goat");

        // set up the RecyclerView
        RecyclerView recyclerView = findViewById(R.id.rvAnimals);
        LinearLayoutManager layoutManager = new LinearLayoutManager(this);
        recyclerView.setLayoutManager(layoutManager);
        DividerItemDecoration dividerItemDecoration = new DividerItemDecoration(recyclerView.getContext(),
                layoutManager.getOrientation());
        recyclerView.addItemDecoration(dividerItemDecoration);
        adapter = new MyRecyclerViewAdapter(this, data);
        adapter.setClickListener(this);
        recyclerView.setAdapter(adapter);
    }

    @Override
    public void onItemClick(View view, int position) {
        Toast.makeText(this, "You clicked " + adapter.getItem(position) + " on row number " + position, Toast.LENGTH_SHORT).show();
    }

    public void onButtonClick(View view) {
        insertSingleItem();
    }

    private void insertSingleItem() {
        String item = "Pig";
        int insertIndex = 2;
        data.add(insertIndex, item);
        adapter.notifyItemInserted(insertIndex);
    }

    private void insertMultipleItems() {
        ArrayList<String> items = new ArrayList<>();
        items.add("Pig");
        items.add("Chicken");
        items.add("Dog");
        int insertIndex = 2;
        data.addAll(insertIndex, items);
        adapter.notifyItemRangeInserted(insertIndex, items.size());
    }

    private void removeSingleItem() {
        int removeIndex = 2;
        data.remove(removeIndex);
        adapter.notifyItemRemoved(removeIndex);
    }

    private void removeMultipleItems() {
        int startIndex = 2; // inclusive
        int endIndex = 4;   // exclusive
        int count = endIndex - startIndex; // 2 items will be removed
        data.subList(startIndex, endIndex).clear();
        adapter.notifyItemRangeRemoved(startIndex, count);
    }

    private void removeAllItems() {
        data.clear();
        adapter.notifyDataSetChanged();
    }

    private void replaceOldListWithNewList() {
        // clear old list
        data.clear();

        // add new list
        ArrayList<String> newList = new ArrayList<>();
        newList.add("Lion");
        newList.add("Wolf");
        newList.add("Bear");
        data.addAll(newList);

        // notify adapter
        adapter.notifyDataSetChanged();
    }

    private void updateSingleItem() {
        String newValue = "I like sheep.";
        int updateIndex = 3;
        data.set(updateIndex, newValue);
        adapter.notifyItemChanged(updateIndex);
    }

    private void moveSingleItem() {
        int fromPosition = 3;
        int toPosition = 1;

        // update data array
        String item = data.get(fromPosition);
        data.remove(fromPosition);
        data.add(toPosition, item);

        // notify adapter
        adapter.notifyItemMoved(fromPosition, toPosition);
    }
}

#Notes

• If you use notifyDataSetChanged(), then no animation will be performed. This can also be an expensive operation, so it is not recommended to use notifyDataSetChanged() if you are only updating a single item or a range of items.
• Check out DiffUtil if you are making large or complex changes to a list.

#Further study

• CodePath: Using the RecyclerView
• Smart way to update RecyclerView using DiffUtil

The comment by MK pointed me in the right direction.

In the case of Apache 2.4 and up, there are different defaults and a new directive.

I am running Apache 2.4.6, and I had to add the following directives to get it working:

SSLProxyEngine on
SSLProxyVerify none 
SSLProxyCheckPeerCN off
SSLProxyCheckPeerName off
SSLProxyCheckPeerExpire off

You can reload using /etc/init.d/nginx reload and sudo service nginx reload

If nginx -t throws some error then it won't reload

so use && to run both at a same time

like

nginx -t && /etc/init.d/nginx reload

Here is the modified script which i took from http://www.foliotek.com/devblog/sql-server-optimization-with-index-rebuilding which i found useful to post here. Although it uses a cursor and i know what is the main problem with cursors it can be easily converted to a cursor-less version.

It is well-documented and you can easily read through it and modify to your needs.

  IF OBJECT_ID('tempdb..#work_to_do') IS NOT NULL 
        DROP TABLE tempdb..#work_to_do

BEGIN TRY
--BEGIN TRAN

use yourdbname

-- Ensure a USE  statement has been executed first.

    SET NOCOUNT ON;

    DECLARE @objectid INT;
    DECLARE @indexid INT;
    DECLARE @partitioncount BIGINT;
    DECLARE @schemaname NVARCHAR(130);
    DECLARE @objectname NVARCHAR(130);
    DECLARE @indexname NVARCHAR(130);
    DECLARE @partitionnum BIGINT;
    DECLARE @partitions BIGINT;
    DECLARE @frag FLOAT;
    DECLARE @pagecount INT;
    DECLARE @command NVARCHAR(4000);

    DECLARE @page_count_minimum SMALLINT
    SET @page_count_minimum = 50

    DECLARE @fragmentation_minimum FLOAT
    SET @fragmentation_minimum = 30.0

-- Conditionally select tables and indexes from the sys.dm_db_index_physical_stats function
-- and convert object and index IDs to names.

    SELECT  object_id AS objectid ,
            index_id AS indexid ,
            partition_number AS partitionnum ,
            avg_fragmentation_in_percent AS frag ,
            page_count AS page_count
    INTO    #work_to_do
    FROM    sys.dm_db_index_physical_stats(DB_ID(), NULL, NULL, NULL,
                                           'LIMITED')
    WHERE   avg_fragmentation_in_percent > @fragmentation_minimum
            AND index_id > 0
            AND page_count > @page_count_minimum;

IF CURSOR_STATUS('global', 'partitions') >= -1
BEGIN
 PRINT 'partitions CURSOR DELETED' ;
    CLOSE partitions
    DEALLOCATE partitions
END
-- Declare the cursor for the list of partitions to be processed.
    DECLARE partitions CURSOR LOCAL
    FOR
        SELECT  *
        FROM    #work_to_do;

-- Open the cursor.
    OPEN partitions;

-- Loop through the partitions.
    WHILE ( 1 = 1 )
        BEGIN;
            FETCH NEXT
FROM partitions
INTO @objectid, @indexid, @partitionnum, @frag, @pagecount;

            IF @@FETCH_STATUS < 0
                BREAK;

            SELECT  @objectname = QUOTENAME(o.name) ,
                    @schemaname = QUOTENAME(s.name)
            FROM    sys.objects AS o
                    JOIN sys.schemas AS s ON s.schema_id = o.schema_id
            WHERE   o.object_id = @objectid;

            SELECT  @indexname = QUOTENAME(name)
            FROM    sys.indexes
            WHERE   object_id = @objectid
                    AND index_id = @indexid;

            SELECT  @partitioncount = COUNT(*)
            FROM    sys.partitions
            WHERE   object_id = @objectid
                    AND index_id = @indexid;

            SET @command = N'ALTER INDEX ' + @indexname + N' ON '
                + @schemaname + N'.' + @objectname + N' REBUILD';

            IF @partitioncount > 1
                SET @command = @command + N' PARTITION='
                    + CAST(@partitionnum AS NVARCHAR(10));

            EXEC (@command);
            --print (@command); //uncomment for testing

            PRINT N'Rebuilding index ' + @indexname + ' on table '
                + @objectname;
            PRINT N'  Fragmentation: ' + CAST(@frag AS VARCHAR(15));
            PRINT N'  Page Count:    ' + CAST(@pagecount AS VARCHAR(15));
            PRINT N' ';
        END;

-- Close and deallocate the cursor.
    CLOSE partitions;
    DEALLOCATE partitions;

-- Drop the temporary table.
    DROP TABLE #work_to_do;
--COMMIT TRAN

END TRY
BEGIN CATCH
--ROLLBACK TRAN
    PRINT 'ERROR ENCOUNTERED:' + ERROR_MESSAGE()
END CATCH

I was facing the same problem and found a solution to get the code to work.

The code given in the android-Sdk/samples/android-?/ApiDemos works fine. Copy paste each folder in the android project and then in the MediaPlayerDemo_Video.java put the path of the video you want to stream in the path variable. It is left blank in the code.

The following video stream worked for me: http://www.pocketjourney.com/downloads/pj/video/famous.3gp

I know that RTSP protocol is to be used for streaming, but mediaplayer class supports http for streaming as mentioned in the code.

I googled for the format of the video and found that the video if converted to mp4 or 3gp using Quicktime Pro works fine for streaming.

I tested the final apk on android 2.1. The application dosent work on emulators well. Try it on devices.

I hope this helps..

  let button: UIButton = UIButton()
    button.setImage(UIImage(named:"imagename"), for: .normal)
    button.addTarget(self, action:#selector(YourClassName.backAction(_sender:)), for: .touchUpInside)

    button.frame = CGRect.init(x: 5, y: 100, width: 45, height: 45)
    view.addSubview(button)

    @objc public func backAction(_sender: UIButton) {

    }

If using in fragment then simply write

getActivity().runOnUiThread(new Runnable() {
    @Override
    public void run() {
        // Do something on UiThread
    }
});

[Update: as of Go 1.8, GOPATH defaults to $HOME/go, but you may still find this useful if you want to understand the GOPATH layout, customize it, etc.]

The official Go site discusses GOPATH and how to lay out a workspace directory.

export GOPATH="$HOME/your-workspace-dir/" -- run it in your shell, then add it to ~/.bashrc or equivalent so it will be set for you in the future. Go will install packages under src/, bin/, and pkg/, subdirectories there. You'll want to put your own packages somewhere under $GOPATH/src, like $GOPATH/src/github.com/myusername/ if you want to publish to GitHub. You'll also probably want export PATH=$PATH:$GOPATH/bin in your .bashrc so you can run compiled programs under $GOPATH.

Optionally, via Rob Pike, you can also set CDPATH so it's faster to cd to package dirs in bash: export CDPATH=.:$GOPATH/src/github.com:$GOPATH/src/golang.org/x means you can just type cd net/html instead of cd $GOPATH/src/golang.org/x/net/html.

Keith Rarick notes you can set GOPATH=$HOME to put Go's src/, pkg/ and bin/ directories right under your homedir. That can be nice (for instance, you might already have $HOME/bin in your path) but of course some folks use multiple workspaces, etc.

Using the type="email" or type="url" will give you a keyboard on some phones at least, such as iPhone. For phone numbers, you can use type="tel".

I think this is the best approach. Using generic ArrayAdapter class and extends your own Object adapter is as simple as follows:

public abstract class GenericArrayAdapter<T> extends ArrayAdapter<T> {

  // Vars
  private LayoutInflater mInflater;

  public GenericArrayAdapter(Context context, ArrayList<T> objects) {
    super(context, 0, objects);
    init(context);
  }

  // Headers
  public abstract void drawText(TextView textView, T object);

  private void init(Context context) {
    this.mInflater = LayoutInflater.from(context);
  }

  @Override public View getView(int position, View convertView, ViewGroup parent) {
    final ViewHolder vh;
    if (convertView == null) {
      convertView = mInflater.inflate(android.R.layout.simple_list_item_1, parent, false);
      vh = new ViewHolder(convertView);
      convertView.setTag(vh);
    } else {
      vh = (ViewHolder) convertView.getTag();
    }

    drawText(vh.textView, getItem(position));

    return convertView;
  }

  static class ViewHolder {

    TextView textView;

    private ViewHolder(View rootView) {
      textView = (TextView) rootView.findViewById(android.R.id.text1);
    }
  }
}

and here your adapter (example):

public class SizeArrayAdapter extends GenericArrayAdapter<Size> {

  public SizeArrayAdapter(Context context, ArrayList<Size> objects) {
    super(context, objects);
  }

  @Override public void drawText(TextView textView, Size object) {
    textView.setText(object.getName());
  }

}

and finally, how to initialize it:

ArrayList<Size> sizes = getArguments().getParcelableArrayList(Constants.ARG_PRODUCT_SIZES);
SizeArrayAdapter sizeArrayAdapter = new SizeArrayAdapter(getActivity(), sizes);
listView.setAdapter(sizeArrayAdapter);

I've created a Gist with TextView layout gravity customizable ArrayAdapter:

https://gist.github.com/m3n0R/8822803

CREATE TABLE #tempww (
    LoginName nvarchar(max),
    DBname nvarchar(max),
    Username nvarchar(max), 
    AliasName nvarchar(max)
)

INSERT INTO #tempww 
EXEC master..sp_msloginmappings 

-- display results
SELECT * 
FROM   #tempww 
ORDER BY dbname, username

-- cleanup
DROP TABLE #tempww

Have you created the DSN first in Control Panel>Administrative Tools>ODBC>System DSN. Name it same as "myDatabase" and if i is asking for locating the database/access file specify the path using browse option. Once ur DSN will be created successfully you will be easily able to access ur DB.

Just click on the link written in the error:

Open Android SDK Manager

and it will show you the dialogs that will help you to install the required sdk for your project.

Based on the same basic idea as in @Will Hartung's answer, here is my magic one-tag extensible template engine. It even includes documentation and an example :-)

WEB-INF/tags/block.tag:

<%--
    The block tag implements a basic but useful extensible template system.

    A base template consists of a block tag without a 'template' attribute.
    The template body is specified in a standard jsp:body tag, which can
    contain EL, JSTL tags, nested block tags and other custom tags, but
    cannot contain scriptlets (scriptlets are allowed in the template file,
    but only outside of the body and attribute tags). Templates can be
    full-page templates, or smaller blocks of markup included within a page.

    The template is customizable by referencing named attributes within
    the body (via EL). Attribute values can then be set either as attributes
    of the block tag element itself (convenient for short values), or by
    using nested jsp:attribute elements (better for entire blocks of markup).

    Rendering a template block or extending it in a child template is then
    just a matter of invoking the block tag with the 'template' attribute set
    to the desired template name, and overriding template-specific attributes
    as necessary to customize it.

    Attribute values set when rendering a tag override those set in the template
    definition, which override those set in its parent template definition, etc.
    The attributes that are set in the base template are thus effectively used
    as defaults. Attributes that are not set anywhere are treated as empty.

    Internally, attributes are passed from child to parent via request-scope
    attributes, which are removed when rendering is complete.

    Here's a contrived example:

    ====== WEB-INF/tags/block.tag (the template engine tag)

    <the file you're looking at right now>

    ====== WEB-INF/templates/base.jsp (base template)

    <%@ page trimDirectiveWhitespaces="true" %>
    <%@ taglib prefix="t" tagdir="/WEB-INF/tags" %>
    <t:block>
        <jsp:attribute name="title">Template Page</jsp:attribute>
        <jsp:attribute name="style">
            .footer { font-size: smaller; color: #aaa; }
            .content { margin: 2em; color: #009; }
            ${moreStyle}
        </jsp:attribute>
        <jsp:attribute name="footer">
            <div class="footer">
                Powered by the block tag
            </div>
        </jsp:attribute>
        <jsp:body>
            <html>
                <head>
                    <title>${title}</title>
                    <style>
                        ${style}
                    </style>
                </head>
                <body>
                    <h1>${title}</h1>
                    <div class="content">
                        ${content}
                    </div>
                    ${footer}
                </body>
            </html>
        </jsp:body>
    </t:block>

    ====== WEB-INF/templates/history.jsp (child template)

    <%@ page trimDirectiveWhitespaces="true" %>
    <%@ taglib prefix="t" tagdir="/WEB-INF/tags" %>
    <t:block template="base" title="History Lesson">
        <jsp:attribute name="content" trim="false">
            <p>${shooter} shot first!</p>
        </jsp:attribute>
    </t:block>

    ====== history-1977.jsp (a page using child template)

    <%@ page trimDirectiveWhitespaces="true" %>
    <%@ taglib prefix="t" tagdir="/WEB-INF/tags" %>
    <t:block template="history" shooter="Han" />

    ====== history-1997.jsp (a page using child template)

    <%@ page trimDirectiveWhitespaces="true" %>
    <%@ taglib prefix="t" tagdir="/WEB-INF/tags" %>
    <t:block template="history" title="Revised History Lesson">
        <jsp:attribute name="moreStyle">.revised { font-style: italic; }</jsp:attribute>
        <jsp:attribute name="shooter"><span class="revised">Greedo</span></jsp:attribute>
    </t:block>

--%>

<%@ tag trimDirectiveWhitespaces="true" %>
<%@ tag import="java.util.HashSet, java.util.Map, java.util.Map.Entry" %>
<%@ tag dynamic-attributes="dynattributes" %>
<%@ attribute name="template" %>
<%
    // get template name (adding default .jsp extension if it does not contain
    // any '.', and /WEB-INF/templates/ prefix if it does not start with a '/')
    String template = (String)jspContext.getAttribute("template");
    if (template != null) {
        if (!template.contains("."))
            template += ".jsp";
        if (!template.startsWith("/"))
            template = "/WEB-INF/templates/" + template;
    }
    // copy dynamic attributes into request scope so they can be accessed from included template page
    // (child is processed before parent template, so only set previously undefined attributes)
    Map<String, String> dynattributes = (Map<String, String>)jspContext.getAttribute("dynattributes");
    HashSet<String> addedAttributes = new HashSet<String>();
    for (Map.Entry<String, String> e : dynattributes.entrySet()) {
        if (jspContext.getAttribute(e.getKey(), PageContext.REQUEST_SCOPE) == null) {
            jspContext.setAttribute(e.getKey(), e.getValue(), PageContext.REQUEST_SCOPE);
            addedAttributes.add(e.getKey());
        }
    }
%>

<% if (template == null) { // this is the base template itself, so render it %>
    <jsp:doBody/>
<% } else { // this is a page using the template, so include the template instead %>
    <jsp:include page="<%= template %>" />
<% } %>

<%
    // clean up the added attributes to prevent side effect outside the current tag
    for (String key : addedAttributes) {
        jspContext.removeAttribute(key, PageContext.REQUEST_SCOPE);
    }
%>

I encountered similar problems too. In my case it was solved by getting the cursor in this way:

cursor = self.conn.cursor(buffered=True)

  <?php
  $post = ['batch_id'=> "2"];
  $ch = curl_init();
  curl_setopt($ch, CURLOPT_URL,'https://example.com/student_list.php');
  curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
  curl_setopt($ch, CURLOPT_POSTFIELDS, http_build_query($post));
  $response = curl_exec($ch);
  $result = json_decode($response);
  curl_close($ch); // Close the connection
  $new=   $result->status;
  if( $new =="1")
  {
    echo "<script>alert('Student list')</script>";
  }
  else 
  {
    echo "<script>alert('Not Removed')</script>";
  }

  ?>

To support IE11 with auto-placement, I converted grid to table layout every time I used the grid layout in 1 dimension only. I also used margin instead of grid-gap.

The result is the same, see how you can do it here https://jsfiddle.net/hp95z6v1/3/

In case MySQL Server is up but you are still getting the error:

For anyone who still have this issue, I followed awesome tutorial http://coolestguidesontheplanet.com/get-apache-mysql-php-phpmyadmin-working-osx-10-9-mavericks/

However i still got #1045 error. What really did the trick was to change localhost to 127.0.0.1 at your config.inc.php. Why was it failing if locahost points to 127.0.0.1? I don't know. But it worked.

===== EDIT =====

Long story short, it is because of permissions in mysql. It may be set to accept connections from 127.0.0.1 but not from localhost.

The actual answer for why this isn't responding is here: https://serverfault.com/a/297310

I would say you have two options:

1. to get all parent divs styled with 100% height (including body and html)

2. to use absolute positioning for one of the parent divs (for example #content) and then all child divs set to height 100%

When a clearfix is used in a parent container, it automatically wraps around all the child elements.

It is usually used after floating elements to clear the float layout.

When float layout is used, it will horizontally align the child elements. Clearfix clears this behaviour.

Example - Bootstrap Panels

In bootstrap, when the class panel is used, there are 3 child types: panel-header, panel-body, panel-footer. All of which have display:block layout but panel-body has a clearfix pre-applied. panel-body is a main container type whereas panel-header & panel-footer isn't intended to be a container, it is just intended to hold some basic text.

If floating elements are added, the parent container does not get wrapped around those elements because the height of floating elements is not inherited by the parent container.

So for panel-header & panel-footer, clearfix is needed to clear the float layout of elements: Clearfix class gives a visual appearance that the height of the parent container has been increased to accommodate all of its child elements.

 <div class="container">
    <div class="panel panel-default">
        <div class="panel-footer">
            <div class="col-xs-6">
                <input type="button" class="btn btn-primary"   value="Button1">
                <input type="button" class="btn btn-primary"   value="Button2">
                <input type="button" class="btn btn-primary"   value="Button3">
            </div>
        </div>
    </div>

    <div class="panel panel-default">
        <div class="panel-footer">
            <div class="col-xs-6">
                <input type="button" class="btn btn-primary"   value="Button1">
                <input type="button" class="btn btn-primary"   value="Button2">
                <input type="button" class="btn btn-primary"   value="Button3">
            </div>
            <div class="clearfix"/>
        </div>
    </div>
</div>

time.time() / datetime is good for quick use, but is not always 100% precise. For that reason, I like to use one of the std lib profilers (especially hotshot) to find out what's what.

Please make sure that you are using the same version of jquery-ui 'js' and 'css' files. Sometimes that could be a problem.

you can define a function and call it remainder with 2 values like rem(number1,number2) that returns number1%number2 then create a while and set it to true then print out two inputs for your function holding number 1 and 2 then print(rem(number1,number2)

If I want to find where anything I want to search is, I use this:

DECLARE @search_string    varchar(200)
    SET @search_string = '%myString%'

    SELECT DISTINCT
           o.name AS Object_Name,
           o.type_desc,
           m.definition
      FROM sys.sql_modules m
           INNER JOIN
           sys.objects o
             ON m.object_id = o.object_id
     WHERE m.definition Like @search_string;

Set your python path to the Anaconda version instead

Windows has a built-in dialog for changing environment variables (following guide applies to XP classical view): Right-click the icon for your machine (usually located on your Desktop and called “My Computer”) and choose Properties there. Then, open the Advanced tab and click the Environment Variables button.

In short, your path is:

My Computer ? Properties ? Advanced ? Environment Variables In this dialog, you can add or modify User and System variables. To change System variables, you need non-restricted access to your machine (i.e. Administrator rights).

Find your PATH variable and add the location of your Anaconda directory.

Example of someone doing it here: How to add to the PYTHONPATH in Windows, so it finds my modules/packages? Make sure that you sub path out for the Anaconda file though.

While using the EM_SETCUEBANNER message is probably simplest, one thing I do not like is that the placeholder text disappears when the control gets focus. That's a pet peeve of mine when I'm filling out forms. I have to click off of it to remember what the field is for.

So here is another solution for WinForms. It overlays a Label on top of the control, which disappears only when the user starts typing.

It's certainly not bulletproof. It accepts any Control, but I've only tested with a TextBox. It may need modification to work with some controls. The method returns the Label control in case you need to modify it a bit in a specific case, but that may never be needed.

Use it like this:

SetPlaceholder(txtSearch, "Type what you're searching for");

Here is the method:

/// <summary>
/// Sets placeholder text on a control (may not work for some controls)
/// </summary>
/// <param name="control">The control to set the placeholder on</param>
/// <param name="text">The text to display as the placeholder</param>
/// <returns>The newly-created placeholder Label</returns>
public static Label SetPlaceholder(Control control, string text) {
    var placeholder = new Label {
        Text = text,
        Font = control.Font,
        ForeColor = Color.Gray,
        BackColor = Color.Transparent,
        Cursor = Cursors.IBeam,
        Margin = Padding.Empty,

        //get rid of the left margin that all labels have
        FlatStyle = FlatStyle.System,
        AutoSize = false,

        //Leave 1px on the left so we can see the blinking cursor
        Size = new Size(control.Size.Width - 1, control.Size.Height),
        Location = new Point(control.Location.X + 1, control.Location.Y)
    };

    //when clicking on the label, pass focus to the control
    placeholder.Click += (sender, args) => { control.Focus(); };

    //disappear when the user starts typing
    control.TextChanged += (sender, args) => {
        placeholder.Visible = string.IsNullOrEmpty(control.Text);
    };

    //stay the same size/location as the control
    EventHandler updateSize = (sender, args) => {
        placeholder.Location = new Point(control.Location.X + 1, control.Location.Y);
        placeholder.Size = new Size(control.Size.Width - 1, control.Size.Height);
    };

    control.SizeChanged += updateSize;
    control.LocationChanged += updateSize;

    control.Parent.Controls.Add(placeholder);
    placeholder.BringToFront();

    return placeholder;
}

The native DOM method does the right thing:

$('.cssbuttongo')[0].click();
                  ^
              Important!

This works regardless of whether the href is a URL, a fragment (e.g. #blah) or even a javascript:.

Note that this calls the DOM click method instead of the jQuery click method (which is very incomplete and completely ignores href).

we can find upper case letter by using regular expression as well

private static void findUppercaseFirstLetterInString(String content) {
    Matcher m = Pattern
            .compile("([a-z])([a-z]*)", Pattern.CASE_INSENSITIVE).matcher(
                    content);
    System.out.println("Given input string : " + content);
    while (m.find()) {
        if (m.group(1).equals(m.group(1).toUpperCase())) {
            System.out.println("First Letter Upper case match found :"
                    + m.group());
        }
    }
}

for detailed example . please visit http://www.onlinecodegeek.com/2015/09/how-to-determines-if-string-starts-with.html

Note: u should login as root user

 SET PASSWORD FOR 'root'@'localhost' = PASSWORD('your password');

You can use match() as well:

if (str.match(/^([a-z0-9]{5,})$/)) {
    alert("match!");
}

But test() seems to be faster as you can read here.

Important difference between match() and test():

match() works only with strings, but test() works also with integers.

12345.match(/^([a-z0-9]{5,})$/); // ERROR
/^([a-z0-9]{5,})$/.test(12345);  // true
/^([a-z0-9]{5,})$/.test(null);   // false

// Better watch out for undefined values
/^([a-z0-9]{5,})$/.test(undefined); // true

 SELECT name, city, count(*) as qty 
 FROM stuff 
 GROUP BY name, city HAVING count(*)> 1

If your array is static or global it's initialized to zero before main() starts. That would be the most efficient option.

Exact comparison of floating point values is know to not always work due to the rounding and internal representation issue.

Try imprecise comparison:

if (x >= 0.099 && x <= 0.101)
{
}

The other alternative is to use the decimal data type.

use this

select * from xxx where dates between '10/oct/2012' and '10/dec/2012'

you are entering string, So give the name of month as according to format...

For some reason none of the results above worked for me.

This selects the last 365 days.

 SELECT ... From ... WHERE date BETWEEN CURDATE() - INTERVAL 1 YEAR AND CURDATE()

read filename ;
sed -i 's/letter/newletter/g' "$filename" #letter

^use as many of these as you need, and you can make your own BASIC encryption

The solution documented by Apple in Technical Q&A QA1747 Debugging Deployed iOS Apps for Xcode 6 is:

1. Choose Window -> Devices from the Xcode menu.
2. Choose the device in the left column.
3. Click the up-triangle at the bottom left of the right hand panel to show the device console.

You want to use an absolute path to the executable, and use the cwd kwarg of Popen to set the working directory. See the docs.

If cwd is not None, the child’s current directory will be changed to cwd before it is executed. Note that this directory is not considered when searching the executable, so you can’t specify the program’s path relative to cwd.

jQuery's hasClass() method returns a boolean (true/false) and not an element. Also, the parameter to be given to it is a class name and not a selector as such.

For ex: x.hasClass('error');

In this line:

const char* cstr2 = ss.str().c_str();

ss.str() will make a copy of the contents of the stringstream. When you call c_str() on the same line, you'll be referencing legitimate data, but after that line the string will be destroyed, leaving your char* to point to unowned memory.

You can use EasyXLS that is a library for exporting Excel files.

Check this code:

DataSet ds = new DataSet();
ds.Tables.Add(dataTable);

ExcelDocument xls = new ExcelDocument();
xls.easy_WriteXLSFile_FromDataSet("datatable.xls", ds, 
           new ExcelAutoFormat(Styles.AUTOFORMAT_EASYXLS1), "DataTable");

See also this sample about how to export datatable to excel in C#.

I just spent several hours on this stupid problem

First, change permissions using this in terminal

find htdocs -type f -exec chmod 664 {} + -o -type d -exec chmod 775 {} +

I don't know what the difference is between 664 and 775 I did both 775 like this Also htdocs needs the directory path for instance for me it was

/usr/local/apache2/htdocs 

find htdocs -type f -exec chmod 775 {} + -o -type d -exec chmod 775 {} +

This is the other dumb thing too

make sure that your image src link is your domain name for instance

src="http://www.fakedomain.com/images/photo.png"

Be sure to have

EnableSendfile off in httpd.conf file
EnableMMAP off in httpd.conf file

You edit those using pico in terminal

I also created a directory for images specifically so that when you type in the browser address bar domainname.com/images, you will get a list of photos which can be downloaded and need to be downloaded successfully to indicate image files that are working properly

<Directory /usr/local/apache2/htdocs/images>
AddType images/png .png
</Directory>

And those are the solutions I have tried, now I have functioning images... yay!!!

Onto the next problem(s)

It's possible to copy database via mysqldump command without storing dump into file:

1. mysql -u root -p -e "create database my_new_database"
2. mysqldump -u root -p original_database | mysql -u root -p my_new_database
3. mysql -u root -p -e "drop database original_database"

declare @data as varchar(50)
set @data='ciao335'


--get text
Select Left(@Data, PatIndex('%[0-9]%', @Data + '1') - 1)    ---->>ciao

--get numeric
Select right(@Data, len(@data) - (PatIndex('%[0-9]%', @Data )-1) )   ---->>335