var strcmp = new Intl.Collator(undefined, {numeric:true, sensitivity:'base'}).compare;

Usage: strcmp(string1, string2)

Result: 1 means string1 is bigger, 0 means equal, -1 means string2 is bigger.

This has higher performance than String.prototype.localeCompare

Also, numeric:true makes it do logical number comparison

You cannot assign an rvalue to an rvalue.

if (strcmp("hello", "hello") = 0)

is wrong. Suggestions:

if (strcmp("hello", "hello") == 0)
                              ^

= is the assign operator.
== is the equal to operator.
I know many new programmers are confused with this fact.

Ok a few things: gets is unsafe and should be replaced with fgets(input, sizeof(input), stdin) so that you don't get a buffer overflow.

Next, to compare strings, you must use strcmp, where a return value of 0 indicates that the two strings match. Using the equality operators (ie. !=) compares the address of the two strings, as opposed to the individual chars inside them.

And also note that, while in this example it won't cause a problem, fgets stores the newline character, '\n' in the buffers also; gets() does not. If you compared the user input from fgets() to a string literal such as "abc" it would never match (unless the buffer was too small so that the '\n' wouldn't fit in it).

I through vnc to understand the X11 more. To specify the display to get a many-displayed program, export DISPLAY=IP:DisplayNum.ScreenNum

For example,

vncserver :2
vncserver -list
echo '$DISPLAY'=$DISPLAY 
export DISPLAY=:2  # export DISPLAY=IP:DisplayNum or export DISPLAY=:DisplayNum for localhost; So that can vnc connect and see the vnc desktop :2 if $DISPLAY is not :2.
echo '$DISPLAY'=$DISPLAY

Java 9 - JEP 259: Stack-Walking API

JEP 259 provides an efficient standard API for stack walking that allows easy filtering of, and lazy access to, the information in stack traces. Before Stack-Walking API, common ways of accessing stack frames were:

Throwable::getStackTrace and Thread::getStackTrace return an array of StackTraceElement objects, which contain the class name and method name of each stack-trace element.

SecurityManager::getClassContext is a protected method, which allows a SecurityManager subclass to access the class context.

JDK-internal sun.reflect.Reflection::getCallerClass method which you shouldn't use anyway

Using these APIs are usually inefficient:

These APIs require the VM to eagerly capture a snapshot of the entire stack, and they return information representing the entire stack. There is no way to avoid the cost of examining all the frames if the caller is only interested in the top few frames on the stack.

In order to find the immediate caller's class, first obtain a StackWalker:

StackWalker walker = StackWalker
                           .getInstance(StackWalker.Option.RETAIN_CLASS_REFERENCE);

Then either call the getCallerClass():

Class<?> callerClass = walker.getCallerClass();

or walk the StackFrames and get the first preceding StackFrame:

walker.walk(frames -> frames
      .map(StackWalker.StackFrame::getDeclaringClass)
      .skip(1)
      .findFirst());

Use TRY_CAST function in exact same way of CAST function. TRY_CAST takes a string and tries to cast it to a data type specified after the AS keyword. If the conversion fails, TRY_CAST returns a NULL instead of failing.

PLAIN JAVASCRIPT:

DEMO: http://codepen.io/tazotodua/pen/orhdp

var shownnn = "yes";_x000D_
var dropd = document.getElementById("image-dropdown");_x000D_
_x000D_
function showww() {_x000D_
  dropd.style.height = "auto";_x000D_
  dropd.style.overflow = "y-scroll";_x000D_
}_x000D_
_x000D_
function hideee() {_x000D_
    dropd.style.height = "30px";_x000D_
    dropd.style.overflow = "hidden";_x000D_
  }_x000D_
  //dropd.addEventListener('mouseover', showOrHide, false);_x000D_
  //dropd.addEventListener('click',showOrHide , false);_x000D_
_x000D_
_x000D_
function myfuunc(imgParent) {_x000D_
  hideee();_x000D_
  var mainDIVV = document.getElementById("image-dropdown");_x000D_
  imgParent.parentNode.removeChild(imgParent);_x000D_
  mainDIVV.insertBefore(imgParent, mainDIVV.childNodes[0]);_x000D_
}

#image-dropdown {_x000D_
  display: inline-block;_x000D_
  border: 1px solid;_x000D_
}_x000D_
#image-dropdown {_x000D_
  height: 30px;_x000D_
  overflow: hidden;_x000D_
}_x000D_
/*#image-dropdown:hover {} */_x000D_
_x000D_
#image-dropdown .img_holder {_x000D_
  cursor: pointer;_x000D_
}_x000D_
#image-dropdown img.flagimgs {_x000D_
  height: 30px;_x000D_
}_x000D_
#image-dropdown span.iTEXT {_x000D_
  position: relative;_x000D_
  top: -8px;_x000D_
}

<!-- not tested in mobiles -->_x000D_
_x000D_
_x000D_
<div id="image-dropdown" onmouseleave="hideee();">_x000D_
  <div class="img_holder" onclick="myfuunc(this);" onmouseover="showww();">_x000D_
    <img class="flagimgs first" src="http://www.google.com/tv/images/socialyoutube.png" /> <span class="iTEXT">First</span>_x000D_
  </div>_x000D_
  <div class="img_holder" onclick="myfuunc(this);" onmouseover="showww();">_x000D_
    <img class="flagimgs second" src="http://www.google.com/cloudprint/learn/images/icons/fiabee.png" /> <span class="iTEXT">Second</span>_x000D_
  </div>_x000D_
  <div class="img_holder" onclick="myfuunc(this);" onmouseover="showww();">_x000D_
    <img class="flagimgs second" src="http://www.google.com/tv/images/lplay.png" /> <span class="iTEXT">Third</span>_x000D_
  </div>_x000D_
  <div class="img_holder" onclick="myfuunc(this);" onmouseover="showww();">_x000D_
    <img class="flagimgs second" src="http://www.google.com/cloudprint/learn/images/icons/cloudprintlite.png" /> <span class="iTEXT">Fourth</span>_x000D_
  </div>_x000D_
</div>

I can suggest using delimiters and using the

String.split(delimiter)

Example properties file:

MON=0800#Something#Something1, Something2

prop.load(new FileInputStream("\\\\Myseccretnetwork\\Project\\props.properties"));
String[]values = prop.get("MON").toString().split("#");

Hope that helps

data = """a,b,c
d,e,f
g,h,i
j,k,l"""

print(data.split())       # ['a,b,c', 'd,e,f', 'g,h,i', 'j,k,l']

str.split, by default, splits by all the whitespace characters. If the actual string has any other whitespace characters, you might want to use

print(data.split("\n"))   # ['a,b,c', 'd,e,f', 'g,h,i', 'j,k,l']

Or as @Ashwini Chaudhary suggested in the comments, you can use

print(data.splitlines())

Use:

$(document.body).addClass('about');

Beware of CSS : display:inline-block when printing.

None of the CCS property to go to next page would work for me in Chrome and Firefox if my table was inside a div with the style display:inline-block

For example, the following doesn't work :

<div style='display:inline-block'>
  <table style='page-break-before:always'>
    ...
  </table>
  <table style='page-break-before:always'>
    ...
  </table>
</div>

But the following work :

<div>
  <table style='page-break-before:always'>
    ...
  </table>
  <table style='page-break-before:always'>
    ...
  </table>
</div>

This error happened to me in a Grails Application with the JTDS Driver 1.3.0 (SQL Server). The problem was an incorrect login in SQL Server. After solve this issue (in SQL Server) my app was correctly deployed in Tomcat. Tip: I saw the error in stacktrace.log

os.system ('/home/user1/exportPath.ksh')

exportPath.ksh:

export PATH=MY_DATA="my_export"

From python 3.5: merging and summing

Thanks to @tokeinizer_fsj that told me in a comment that I didn't get completely the meaning of the question (I thought that add meant just adding keys that eventually where different in the two dictinaries and, instead, i meant that the common key values should be summed). So I added that loop before the merging, so that the second dictionary contains the sum of the common keys. The last dictionary will be the one whose values will last in the new dictionary that is the result of the merging of the two, so I thing the problem is solved. The solution is valid from python 3.5 and following versions.

a = {
    "a": 1,
    "b": 2,
    "c": 3
}

b = {
    "a": 2,
    "b": 3,
    "d": 5
}

# Python 3.5

for key in b:
    if key in a:
        b[key] = b[key] + a[key]

c = {**a, **b}
print(c)

>>> c
{'a': 3, 'b': 5, 'c': 3, 'd': 5}

Reusable code

a = {'a': 1, 'b': 2, 'c': 3}
b = {'b': 3, 'c': 4, 'd': 5}


def mergsum(a, b):
    for k in b:
        if k in a:
            b[k] = b[k] + a[k]
    c = {**a, **b}
    return c


print(mergsum(a, b))

One other difference not mentioned so far is that

• with Clone() the destination array need not exist yet since a new one is created from scratch.
• with CopyTo() not only does the destination array need to already exist, it needs to be large enough to hold all the elements in the source array from the index you specify as the destination.

Use the following select statement to get the whole definition:

select ROUTINE_DEFINITION 
  from INFORMATION_SCHEMA.ROUTINES 
 where ROUTINE_NAME = 'someprocname'

I guess that SSMS and other tools read this out and make changes where necessary, such as changing CREATE to ALTER. As far as I know, SQL stores not other representations of the procedure.

no need to require the ckeditor.php, because CKEditor will not processed by PHP...

you need just following the _samples directory and see what they do.

just need to include ckeditor.js by html tag, and do some configuration in javascript.

Do you use the input type="file" to choose the uploadfiles? if so, why not use the accept attribute?

<input type="file" name="myImage" accept="image/x-png,image/gif,image/jpeg" />

Test if a file exists:

HOST="example.com"
FILE="/path/to/file"

if ssh $HOST "test -e $FILE"; then
    echo "File exists."
else
    echo "File does not exist."
fi

And the opposite, test if a file does not exist:

HOST="example.com"
FILE="/path/to/file"

if ! ssh $HOST "test -e $FILE"; then
    echo "File does not exist."
else
    echo "File exists."
fi

use pdb or ipdb. Diffrence between these two is ipdb supports auto complete.

for pdb

import pdb
pdb.set_trace()

for ipdb

import ipdb
ipdb.set_trace()

For executing new line hit n key, for continue hit c key. check more options by using help(pdb)

I have used this very often in neural networks. It is well known that when we start training a neural network we randomly initialise the weights. The model is trained on these weights on a particular dataset. After number of epochs you get trained set of weights.

Now suppose you want to again train from scratch or you want to pass the model to others to reproduce your results, the weights will be again initialised to a random numbers which mostly will be different from earlier ones. The obtained trained weights after same number of epochs ( keeping same data and other parameters ) as earlier one will differ. The problem is your model is no more reproducible that is every time you train your model from scratch it provides you different sets of weights. This is because the model is being initialized by different random numbers every time.

What if every time you start training from scratch the model is initialised to the same set of random initialise weights? In this case your model could become reproducible. This is achieved by numpy.random.seed(0). By mentioning seed() to a particular number, you are hanging on to same set of random numbers always.

If you are using a console application and you are pumping messages, can't you use the WM_QUIT message?

You can always use the built in TryParse methods for many datatypes to see if the string in question will pass.

Example.

decimal myDec;
var Result = decimal.TryParse("123", out myDec);

Result would then = True

decimal myDec;
var Result = decimal.TryParse("abc", out myDec);

Result would then = False

This can also be solved with align-self: stretch; on the element we want to be stretched.

Sometimes it is desirable to only stretch one item in a Flexbox setup.

.container {
  height: 200px;
  width: 500px;
  display: flex;
  flex-direction: row;
}
.flex-1 {
  width: 100px;
  background-color: blue;
}
.flex-2 {
  position: relative;
  flex: 1;
  align-self: stretch;
  background-color: red;
}
.flex-2-child {
  background-color: green;
}

<div class="container">
  <div class="flex-1"></div>
  <div class="flex-2">
    <div class="flex-2-child"></div>
  </div>
</div>

My story, Eclipse wanted a file called "kernel-ranchu" in the system image folder ( /path/to/android-sdk-macosx/system-images/android-25/google_apis/arm64-v8a ).

emulator: ERROR: This AVD's configuration is missing a kernel file! Please ensure the file "kernel-ranchu" is in the same location as your system image.

emulator: ERROR: ANDROID_SDK_ROOT is undefined

In that system image folder there was a file called "kernel-qemu". I just renamed it as "kernel-ranchu" and it worked...

Selenium WebDriver

1. WebDriver.Close() This method is used to close the current open window. It closes the current open window on which driver has focus on.

2. WebDriver.Quit() This method is used to destroy the instance of WebDriver. It closes all Browser Windows associated with that driver and safely ends the session. WebDriver.Quit() calls Dispose.

3. WebDriver.Dispose() This method closes all Browser windows and safely ends the session

As the others stated : it's by compiling. You can use the javac command, but I'f you're new at java, I suggest you use a software for compiling your code (and IDE) such as Eclipse and it will do the job for you.

Note : Use it if calculating / adding days from current date.

Be aware: this answer has issues (see comments)

var myDate = new Date();
myDate.setDate(myDate.getDate() + AddDaysHere);

It should be like

var newDate = new Date(date.setTime( date.getTime() + days * 86400000 ));

If you're using jQuery, this is a kinda cool way to manipulate elements in javascript without adding them to the DOM:

var myAnchor = $("<a />");

//set href    
myAnchor.attr('href', 'http://example.com/path/to/myfile')

//your link's features
var hostname = myAnchor.attr('hostname'); // http://example.com
var pathname = myAnchor.attr('pathname'); // /path/to/my/file
//...etc

Single Property solution is:

.className {
    text-decoration: line-through red;
};

Define your color after line through property.

Few more ways.

1) The geekiest and hackiest - it uses the IEXPRESS to create small exe that will create a pop-up with a single button (it can create two more types of pop-up messages). Works on EVERY windows from XP and above:

;@echo off
;setlocal

;set ppopup_executable=popupe.exe
;set "message2=click OK to continue"
;
;del /q /f %tmp%\yes >nul 2>&1
;
;copy /y "%~f0" "%temp%\popup.sed" >nul 2>&1

;(echo(FinishMessage=%message2%)>>"%temp%\popup.sed";
;(echo(TargetName=%cd%\%ppopup_executable%)>>"%temp%\popup.sed";
;(echo(FriendlyName=%message1_title%)>>"%temp%\popup.sed"
;
;iexpress /n /q /m %temp%\popup.sed
;%ppopup_executable%
;rem del /q /f %ppopup_executable% >nul 2>&1

;pause

;endlocal
;exit /b 0


[Version]
Class=IEXPRESS
SEDVersion=3
[Options]
PackagePurpose=InstallApp
ShowInstallProgramWindow=1
HideExtractAnimation=1
UseLongFileName=0
InsideCompressed=0
CAB_FixedSize=0
CAB_ResvCodeSigning=0
RebootMode=N
InstallPrompt=%InstallPrompt%
DisplayLicense=%DisplayLicense%
FinishMessage=%FinishMessage%
TargetName=%TargetName%
FriendlyName=%FriendlyName%
AppLaunched=%AppLaunched%
PostInstallCmd=%PostInstallCmd%
AdminQuietInstCmd=%AdminQuietInstCmd%
UserQuietInstCmd=%UserQuietInstCmd%
SourceFiles=SourceFiles
[SourceFiles]
SourceFiles0=C:\Windows\System32\
[SourceFiles0]
%FILE0%=


[Strings]
AppLaunched=subst.exe
PostInstallCmd=<None>
AdminQuietInstCmd=
UserQuietInstCmd=
FILE0="subst.exe"
DisplayLicense=
InstallPrompt=

2) Using MSHTA. Also works on every windows machine from XP and above (despite the OP do not want "external" languages the JavaScript here is minimized). Should be saved as .bat:

@if (true == false) @end /*!
@echo off
mshta "about:<script src='file://%~f0'></script><script>close()</script>" %*
goto :EOF */

alert("Hello, world!");

or in one line:

mshta "about:<script>alert('Hello, world!');close()</script>"

or

mshta "javascript:alert('message');close()"

or

mshta.exe vbscript:Execute("msgbox ""message"",0,""title"":close")

3) Here's parameterized .bat/jscript hybrid (should be saved as bat). It again uses JavaScript despite the OP request but as it is a bat it can be called as a bat file without worries. It uses POPUP which allows a little bit more control than the more popular MSGBOX. It uses WSH, but not MSHTA like in the example above.

 @if (@x)==(@y) @end /***** jscript comment ******
     @echo off

     cscript //E:JScript //nologo "%~f0" "%~nx0" %*
     exit /b 0

 @if (@x)==(@y) @end ******  end comment *********/


var wshShell = WScript.CreateObject("WScript.Shell");
var args=WScript.Arguments;
var title=args.Item(0);

var timeout=-1;
var pressed_message="button pressed";
var timeout_message="timed out";
var message="";

function printHelp() {
    WScript.Echo(title + "[-title Title] [-timeout m] [-tom \"Time-out message\"] [-pbm \"Pressed button message\"]  [-message \"pop-up message\"]");
}

if (WScript.Arguments.Length==1){
    runPopup();
    WScript.Quit(0);
}

if (args.Item(1).toLowerCase() == "-help" || args.Item(1).toLowerCase() == "-h" ) {
    printHelp();
    WScript.Quit(0);
}

if (WScript.Arguments.Length % 2 == 0 ) {
    WScript.Echo("Illegal arguments ");
    printHelp();
    WScript.Quit(1);
}

for (var arg = 1 ; arg<args.Length;arg=arg+2) {

    if (args.Item(arg).toLowerCase() == "-title") {
        title = args.Item(arg+1);
    }

    if (args.Item(arg).toLowerCase() == "-timeout") {
        timeout = parseInt(args.Item(arg+1));
        if (isNaN(timeout)) {
            timeout=-1;
        }
    }

    if (args.Item(arg).toLowerCase() == "-tom") {
        timeout_message = args.Item(arg+1);
    }

    if (args.Item(arg).toLowerCase() == "-pbm") {
        pressed_message = args.Item(arg+1);
    }

    if (args.Item(arg).toLowerCase() == "-message") {
        message = args.Item(arg+1);
    }
}

function runPopup(){
    var btn = wshShell.Popup(message, timeout, title, 0x0 + 0x10);

    switch(btn) {
        // button pressed.
        case 1:
            WScript.Echo(pressed_message);
            break;

        // Timed out.
        case -1:
           WScript.Echo(timeout_message);
           break;
    }
}

runPopup();

4) and one jscript.net/.bat hybrid (should be saved as .bat) .This time it uses .NET and compiles a small .exe file that could be deleted:

@if (@X)==(@Y) @end /****** silent jscript comment ******

@echo off
::::::::::::::::::::::::::::::::::::
:::       compile the script    ::::
::::::::::::::::::::::::::::::::::::
setlocal


::if exist "%~n0.exe" goto :skip_compilation

:: searching the latest installed .net framework
for /f "tokens=* delims=" %%v in ('dir /b /s /a:d /o:-n "%SystemRoot%\Microsoft.NET\Framework\v*"') do (
    if exist "%%v\jsc.exe" (
        rem :: the javascript.net compiler
        set "jsc=%%~dpsnfxv\jsc.exe"
        goto :break_loop
    )
)
echo jsc.exe not found && exit /b 0
:break_loop



call %jsc% /nologo /out:"%~n0.exe" "%~f0" 
::::::::::::::::::::::::::::::::::::
:::       end of compilation    ::::
::::::::::::::::::::::::::::::::::::
:skip_compilation

::
::::::::::
"%~n0.exe" %*
::::::::
::
endlocal
exit /b 0

****** end of jscript comment ******/

import System;
import System.Windows;
import System.Windows.Forms

var arguments:String[] = Environment.GetCommandLineArgs();
MessageBox.Show(arguments[1],arguments[0]);

5) and at the end one single call to powershell that creates a pop-up (can be called from command line or from batch if powershell is installed):

powershell [Reflection.Assembly]::LoadWithPartialName("""System.Windows.Forms""");[Windows.Forms.MessageBox]::show("""Hello World""", """My PopUp Message Box""")

6) And the dbenham's approach seen here

start "" cmd /c "echo(&echo(&echo              Hello world!     &echo(&pause>nul"

7) For a system tray notifications you can try this:

call SystemTrayNotification.bat  -tooltip warning -time 3000 -title "Woow" -text "Boom" -icon question

a.insert(a.end(), b.begin(), b.end());

or

a.insert(std::end(a), std::begin(b), std::end(b));

The second variant is a more generically applicable solution, as b could also be an array. However, it requires C++11. If you want to work with user-defined types, use ADL:

using std::begin, std::end;
a.insert(end(a), begin(b), end(b));

Here is a demo to illustrate the difference:

document.querySelectorAll("button")[0].addEventListener('click', e=>{
  e.stopPropagation();
  alert(1);
});
document.querySelectorAll("button")[1].addEventListener('click', e=>{
  e.stopImmediatePropagation();
  alert(1);
});
document.querySelectorAll("button")[0].addEventListener('click', e=>{
  alert(2);
});
document.querySelectorAll("button")[1].addEventListener('click', e=>{
  alert(2);
});

<div onclick="alert(3)">
   <button>1...2</button>
   <button>1</button>
</div>

Notice that you can attach multiple event handlers to an event on an element.

Another solution to this problem is to install PostgreSQL using Homebrew/linuxbrew:

brew install postgresql

As a matter of habit I don't like to use sudo unless I have to.

In case you need ViewPager that adjust its size to every child, not just to biggest one, I have wrote a piece of code that does it. Note that there is no animation upon that change (not neccessary in my case)

android:minHeight flag is also supported.

public class ChildWrappingAdjustableViewPager extends ViewPager {
    List<Integer> childHeights = new ArrayList<>(getChildCount());
    int minHeight = 0;
    int currentPos = 0;

    public ChildWrappingAdjustableViewPager(@NonNull Context context) {
        super(context);
        setOnPageChangeListener();
    }

    public ChildWrappingAdjustableViewPager(@NonNull Context context, @Nullable AttributeSet attrs) {
        super(context, attrs);
        obtainMinHeightAttribute(context, attrs);
        setOnPageChangeListener();
    }

    @Override
    protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {            
        childHeights.clear();

        //calculate child views
        for (int i = 0; i < getChildCount(); i++) {
            View child = getChildAt(i);
            child.measure(widthMeasureSpec, MeasureSpec.makeMeasureSpec(0, MeasureSpec.UNSPECIFIED));
            int h = child.getMeasuredHeight();
            if (h < minHeight) {
                h = minHeight;
            }
            childHeights.add(i, h);
        }

        if (childHeights.size() - 1 >= currentPos) {
            heightMeasureSpec = MeasureSpec.makeMeasureSpec(childHeights.get(currentPos), MeasureSpec.EXACTLY);
        }
        super.onMeasure(widthMeasureSpec, heightMeasureSpec);
    }

    private void obtainMinHeightAttribute(@NonNull Context context, @Nullable AttributeSet attrs) {
        int[] heightAttr = new int[]{android.R.attr.minHeight};
        TypedArray typedArray = context.obtainStyledAttributes(attrs, heightAttr);
        minHeight = typedArray.getDimensionPixelOffset(0, -666);
        typedArray.recycle();
    }

    private void setOnPageChangeListener() {
        this.addOnPageChangeListener(new SimpleOnPageChangeListener() {
            @Override
            public void onPageSelected(int position) {
                currentPos = position;

                ViewGroup.LayoutParams layoutParams = ChildWrappingAdjustableViewPager.this.getLayoutParams();
                layoutParams.height = childHeights.get(position);
                ChildWrappingAdjustableViewPager.this.setLayoutParams(layoutParams);
                ChildWrappingAdjustableViewPager.this.invalidate();
            }
        });
    }
}

The solutions provided are pretty decent. However, I generally use a more simple solution.

Here is a linkify utility function

/**
 * Method is used to Linkify words in a TextView
 *
 * @param textView TextView who's text you want to change
 * @param textToLink The text to turn into a link
 * @param url   The url you want to send the user to
 */
fun linkify(textView: TextView, textToLink: String, url: String) {
    val pattern = Pattern.compile(textToLink)
    Linkify.addLinks(textView, pattern, url, { _, _, _ -> true })
    { _, _ -> "" }
}

Using this function is pretty simple. Here is an example

    // terms and privacy
    val tvTerms = findViewById<TextView>(R.id.tv_terms)
    val tvPrivacy = findViewById<TextView>(R.id.tv_privacy)
    Utils.linkify(tvTerms, resources.getString(R.string.terms),
            Constants.TERMS_URL)
    Utils.linkify(tvPrivacy, resources.getString(R.string.privacy),
            Constants.PRIVACY_URL)

I think this way is better :

SELECT * FROM "comments" WHERE ("comments"."id" IN (1,3,2,4))
    ORDER BY  id=1 DESC, id=3 DESC, id=2 DESC, id=4 DESC

The below code checks if an element is hidden in jQuery or visible

// You can also do this...

        $("button").click(function(){
            // show hide paragraph on button click
            $("p").toggle("slow", function(){
                // check paragraph once toggle effect is completed
                if($("p").is(":visible")){
                    alert("The paragraph  is visible.");
                } else{
                    alert("The paragraph  is hidden.");
                }
            });
        });

PuTTY's plink has a command-line argument for a password. Some other suggestions have been made in the answers to this question: using Expect (which is available for Windows), or writing a launcher in Python with Paramiko.

You can change height and width with css:

#search {
     height: 100px;
     width: 400px;
}

It's worth pointing out that safari on OSX ignores most input button styles, however.

React Hooks (16.8+):

const Dropdown = ({
  options
}) => {
  const [selectedOption, setSelectedOption] = useState(options[0].value);
  return (
      <select
        value={selectedOption}
        onChange={e => setSelectedOption(e.target.value)}>
        {options.map(o => (
          <option key={o.value} value={o.value}>{o.label}</option>
        ))}
      </select>
  );
};

(Update: August 2011)

As geofflane mentions in his answer, Java 7 now support named groups.
tchrist points out in the comment that the support is limited.
He details the limitations in his great answer "Java Regex Helper"

Java 7 regex named group support was presented back in September 2010 in Oracle's blog.

In the official release of Java 7, the constructs to support the named capturing group are:

• (?<name>capturing text) to define a named group "name"
• \k<name> to backreference a named group "name"
• ${name} to reference to captured group in Matcher's replacement string
• Matcher.group(String name) to return the captured input subsequence by the given "named group".

Other alternatives for pre-Java 7 were:

• Google named-regex (see John Hardy's answer)
  Gábor Lipták mentions (November 2012) that this project might not be active (with several outstanding bugs), and its GitHub fork could be considered instead.
• jregex (See Brian Clozel's answer)

(Original answer: Jan 2009, with the next two links now broken)

You can not refer to named group, unless you code your own version of Regex...

That is precisely what Gorbush2 did in this thread.

Regex2

(limited implementation, as pointed out again by tchrist, as it looks only for ASCII identifiers. tchrist details the limitation as:

only being able to have one named group per same name (which you don’t always have control over!) and not being able to use them for in-regex recursion.

Note: You can find true regex recursion examples in Perl and PCRE regexes, as mentioned in Regexp Power, PCRE specs and Matching Strings with Balanced Parentheses slide)

Example:

String:

"TEST 123"

RegExp:

"(?<login>\\w+) (?<id>\\d+)"

Access

matcher.group(1) ==> TEST
matcher.group("login") ==> TEST
matcher.name(1) ==> login

Replace

matcher.replaceAll("aaaaa_$1_sssss_$2____") ==> aaaaa_TEST_sssss_123____
matcher.replaceAll("aaaaa_${login}_sssss_${id}____") ==> aaaaa_TEST_sssss_123____ 

(extract from the implementation)

public final class Pattern
    implements java.io.Serializable
{
[...]
    /**
     * Parses a group and returns the head node of a set of nodes that process
     * the group. Sometimes a double return system is used where the tail is
     * returned in root.
     */
    private Node group0() {
        boolean capturingGroup = false;
        Node head = null;
        Node tail = null;
        int save = flags;
        root = null;
        int ch = next();
        if (ch == '?') {
            ch = skip();
            switch (ch) {

            case '<':   // (?<xxx)  look behind or group name
                ch = read();
                int start = cursor;
[...]
                // test forGroupName
                int startChar = ch;
                while(ASCII.isWord(ch) && ch != '>') ch=read();
                if(ch == '>'){
                    // valid group name
                    int len = cursor-start;
                    int[] newtemp = new int[2*(len) + 2];
                    //System.arraycopy(temp, start, newtemp, 0, len);
                    StringBuilder name = new StringBuilder();
                    for(int i = start; i< cursor; i++){
                        name.append((char)temp[i-1]);
                    }
                    // create Named group
                    head = createGroup(false);
                    ((GroupTail)root).name = name.toString();

                    capturingGroup = true;
                    tail = root;
                    head.next = expr(tail);
                    break;
                }

Previous answer can be shortened and be more readable.

$('#commentForm').submit(function () {
    $(this).append($.map(params, function (param) {
        return   $('<input>', {
            type: 'hidden',
            name: param.name,
            value: param.value
        })
    }))
});

Change the database.php file from

$db['default']['dbdriver'] = 'mysql';

to

$db['default']['dbdriver'] = 'mysqli';

Use prop() mehtod

Source Link

<p>
    <h5>Radio Selection</h5>

    <label>
        <input type="radio" name="myRadio" value="1"> Option 1
    </label>
    <label>
        <input type="radio" name="myRadio" value="2"> Option 2
    </label>
    <label>
        <input type="radio" name="myRadio" value="3"> Option 3
    </label>
</p>

<p>
    <button>Check Radio Option 2</button>
</p>


<script>
    $(function () {

        $("button").click(function () {
            $("input:radio[value='2']").prop('checked',true);
        });

    });
</script>

I ran into a similar problem where I have a dependency property that I wanted the class to listen to change events to grab related data from a service.

public static readonly DependencyProperty CustomerProperty = 
    DependencyProperty.Register("Customer", typeof(Customer),
        typeof(CustomerDetailView),
        new PropertyMetadata(OnCustomerChangedCallBack));

public Customer Customer {
    get { return (Customer)GetValue(CustomerProperty); }
    set { SetValue(CustomerProperty, value); }
}

private static void OnCustomerChangedCallBack(
        DependencyObject sender, DependencyPropertyChangedEventArgs e)
{
    CustomerDetailView c = sender as CustomerDetailView;
    if (c != null) {
        c.OnCustomerChanged();
    }
}

protected virtual void OnCustomerChanged() {
    // Grab related data.
    // Raises INotifyPropertyChanged.PropertyChanged
    OnPropertyChanged("Customer");
}

I know this is old, but none of the answers here is a real solution if you want to be able to double-click Python files and have the correct interpreter used without modifying your PYTHONPATH or PATH every time you want to use a different interpreter. Sure, from the command line, activate my-environment works, but OP specifically asked about double-clicking.

In this case, the correct thing to do is use the Python launcher for Windows. Then, all you have to do is add #! path\to\interpreter\python.exe to the top of your script. Unfortunately, although the launcher comes standard with Python 3.3+, it is not included with Anaconda (see Python & Windows: Where is the python launcher?), and the simplest thing to do is to install it separately from here.

you can use a Timer (System.Windows.Forms.Timer).

Hook it's Tick event, advance then progress bar until it reaches the max value. when it does (hit the max) and you didn't finish the job, reset the progress bar value back to minimum.

...just like Windows Explorer :-)

Use datetime field type. It comes with many advantages like human readability (nobody reads timestamps) and MySQL functions.

To convert from a unix timestamp, you can use MySQL function FROM_UNIXTIME(1299762201428). To convert back you can use UNIX_TIMESTAMP: SELECT UNIX_TIMESTAMP(t_time) FROM table_name.

Of course, if you don't like MySQL function, you could always use PHP: 'INSERT INTO table_name SET t_time = ' . date('Y-m-d H:i:s', $unix_timestamp).

According to MDN, the split() method divides a String into an ordered set of substrings, puts these substrings into an array, and returns the array.

Example

var str = 'Hello my friend'

var split1 = str.split(' ') // ["Hello", "my", "friend"]
var split2 = str.split('') // ["H", "e", "l", "l", "o", " ", "m", "y", " ", "f", "r", "i", "e", "n", "d"]

In your case

var str = 'something -- something_else'
var splitArr = str.split(' -- ') // ["something", "something_else"]

console.log(splitArr[0]) // something
console.log(splitArr[1]) // something_else

/^(?!my).*/

(?!expression) is a negative lookahead; it matches a position where expression doesn't match starting at that position.

<!doctype html>
<html>
<body>
<p id = "myString">zyxtspqnmdba</p>
<p id = "orderedString"></p>
<script>
var myString = document.getElementById("myString").innerHTML;
orderString(myString);
function orderString(str) {
    var i = 0;
    var myArray = str.split("");
    while (i < str.length){
        var j = i + 1;
        while (j < str.length) {
            if (myArray[j] < myArray[i]){
                var temp = myArray[i];
                myArray[i] = myArray[j];
                myArray[j] = temp;
            }
            j++;
        }
        i++;
    }
    var newString = myArray.join("");
    document.getElementById("orderedString").innerHTML = newString;
}
</script>
</body>
</html>

Every answer so far implies the word "shell" in the question equates to Bash.

This is how one could do that in a standard Bourne shell:

printf $str | tail -c 1

Here is my modular solution:

var final_style = document.createElement('style');
final_style.type = 'text/css';

function addNewStyle(selector, style){
  final_style.innerHTML += selector + '{ ' + style + ' } \n';
};

function submitNewStyle(){
  document.getElementsByTagName('head')[0].appendChild(final_style);

  final_style = document.createElement('style');
  final_style.type = 'text/css';
};

function submitNewStyleWithMedia(mediaSelector){
  final_style.innerHTML = '@media(' + mediaSelector + '){\n' + final_style.innerHTML + '\n};';
    submitNewStyle();
};

You basically anywhere in your code do:
addNewStyle('body', 'color: ' + color1); , where color1 is defined variable.

When you want to "post" the current CSS file you simply do submitNewStyle(),
and then you can still add more CSS later.

If you want to add it with "media queries", you have the option.
After "addingNewStyles" you simply use submitNewStyleWithMedia('min-width: 1280px');.

It was pretty useful for my use-case, as I was changing CSS of public (not mine) website according to current time. I submit one CSS file before using "active" scripts, and the rest afterwards (makes the site look kinda-like it should before accessing elements through querySelector).

If you are behind a proxy server this issue could happen i had the same issue and was solved by: Preferences -> General -> Proxy Settings -> No Proxy.

"Maybe the tomcat ready-message was sent to the proxy - and never reached the IDE."

found @: https://netbeans.org/bugzilla/show_bug.cgi?id=231220

Because switching to HTTPS can be painful or impossible depending on your architecture, I found a workaround solution: you can use the Google Maps Geolocation API. Although it has usage limits, it does the job. You will need an browser API key, so don't forget to limit it's usage to your page hostname.

I use it as a fallback method to the getCurrentPosition() method if it fails. It allows me to make it work until I switch to HTTPS.

Here's the JSFiddles:

• HTTP: getCurrentPosition() will fail and fall back to the API
• HTTPS: getCurrentPosition() will succeed

The actually correct and convenient answer for python 3:

>>> import codecs
>>> myString = "spam\\neggs"
>>> print(codecs.escape_decode(bytes(myString, "utf-8"))[0].decode("utf-8"))
spam
eggs
>>> myString = "naïve \\t test"
>>> print(codecs.escape_decode(bytes(myString, "utf-8"))[0].decode("utf-8"))
naïve    test

Details regarding codecs.escape_decode:

• codecs.escape_decode is a bytes-to-bytes decoder
• codecs.escape_decode decodes ascii escape sequences, such as: b"\\n" -> b"\n", b"\\xce" -> b"\xce".
• codecs.escape_decode does not care or need to know about the byte object's encoding, but the encoding of the escaped bytes should match the encoding of the rest of the object.

Background:

• @rspeer is correct: unicode_escape is the incorrect solution for python3. This is because unicode_escape decodes escaped bytes, then decodes bytes to unicode string, but receives no information regarding which codec to use for the second operation.
• @Jerub is correct: avoid the AST or eval.
• I first discovered codecs.escape_decode from this answer to "how do I .decode('string-escape') in Python3?". As that answer states, that function is currently not documented for python 3.

if you are using localhost database, try port 3306

In simple terms we need nested classes primarily because Java does not provide closures.

Nested Classes are classes defined inside the body of another enclosing class. They are of two types - static and non-static.

They are treated as members of the enclosing class, hence you can specify any of the four access specifiers - private, package, protected, public. We don't have this luxury with top-level classes, which can only be declared public or package-private.

Inner classes aka Non-stack classes have access to other members of the top class, even if they are declared private while Static nested classes do not have access to other members of the top class.

public class OuterClass {
    public static class Inner1 {
    }
    public class Inner2 {
    }
}

Inner1 is our static inner class and Inner2 is our inner class which is not static. The key difference between them, you can't create an Inner2 instance without an Outer where as you can create an Inner1 object independently.

When would you use Inner class?

Think of a situation where Class A and Class B are related, Class B needs to access Class A members, and Class B is related only to Class A. Inner classes comes into the picture.

For creating an instance of inner class, you need to create an instance of your outer class.

OuterClass outer = new OuterClass();
OuterClass.Inner2 inner = outer.new Inner2();

or

OuterClass.Inner2 inner = new OuterClass().new Inner2();

When would you use static Inner class?

You would define a static inner class when you know that it does not have any relationship with the instance of the enclosing class/top class. If your inner class doesn't use methods or fields of the outer class, it's just a waste of space, so make it static.

For example, to create an object for the static nested class, use this syntax:

OuterClass.Inner1 nestedObject = new OuterClass.Inner1();

The advantage of a static nested class is that it doesn't need an object of the containing class/top class to work. This can help you to reduce the number of objects your application creates at runtime.

It almost never makes intuitive sense to have two inputs next to each other without labels. Here is a solution with labels mixed in, which also works quite well with just a minor modification to existing Bootstrap styles.

Preview:

HTML:

<div class="input-group">
  <span class="input-group-addon">Between</span>
  <input type="text" class="form-control" placeholder="Type something..." />
  <span class="input-group-addon" style="border-left: 0; border-right: 0;">and</span>
  <input type="text" class="form-control" placeholder="Type something..." />
</div>

CSS:

.input-group-addon {
  border-left-width: 0;
  border-right-width: 0;
}
.input-group-addon:first-child {
  border-left-width: 1px;
}
.input-group-addon:last-child {
  border-right-width: 1px;
}

JSFiddle: http://jsfiddle.net/yLvk5mn1/31/

Looping:

foreach(keys %my_hash) { print "$_ / $my_hash{$_}\n"; }

Functional

map {print "$_ / $my_hash{$_}\n"; } keys %my_hash;

But for sheer elegance, I'd have to choose wrang-wrang's. For my own code, I'd choose my foreach. Or tetro's Dumper use.

Quentin is correct, it can't be done with CSS. If you want to add a title attribute, you can do it with JavaScript. Here's an example using jQuery:

$('label').attr('title','mandatory');

In the provided example your decimal is 8.6. Had it been 8.5 or 9.5, the statement i1 == i2 might have been true. Infact it would have been true for 8.5, and false for 9.5.

Explanation:

Regardless of the decimal part, the second statement, int i2 = (int)score will discard the decimal part and simply return you the integer part. Quite dangerous thing to do, as data loss might occur.

Now, for the first statement, two things can happen. If the decimal part is 5, that is, it is half way through, a decision is to be made. Do we round up or down? In C#, the Convert class implements banker's rounding. See this answer for deeper explanation. Simply put, if the number is even, round down, if the number is odd, round up.

E.g. Consider:

        double score = 8.5;
        int i1 = Convert.ToInt32(score); // 8
        int i2 = (int)score;             // 8

        score += 1;
        i1 = Convert.ToInt32(score);     // 10
        i2 = (int)score;                 // 9

Apart from using custom images for bullets, you can also style the ul or li elements one way and then style the contents differently, as seen here.

The benefit is the lack of images for one thing, and also the added control. The disadvantage is that it tends to involve non-semantic markup, except in this case where the anchors are required already.

That code should work, but you need to include the localization in your page (it isn't included by default). Try putting this in your <head> tag, somewhere after you include jQuery and jQueryUI:

<script type="text/javascript"
        src="https://raw.githubusercontent.com/jquery/jquery-ui/master/ui/i18n/datepicker-fr.js">
</script>

I can't find where this is documented on the jQueryUI site, but if you view the source of this demo you'll see that this is how they do it. Also, please note that including this JS file will set the datepicker defaults to French, so if you want only some datepickers to be in French, you'll have to set the default back to English.

You can find all languages here at github: https://github.com/jquery/jquery-ui/tree/master/ui/i18n

For graphics the standard C# Graphics class is way slower than GDI accessed via C/C++. I know this has nothing to do with the language per se, more with the total .NET platform, but Graphics is what is offered to the developer as a GDI replacement, and its performance is so bad I wouldn't even dare to do graphics with it.

We have a simple benchmark we use to see how fast a graphics library is, and that is simply drawing random lines in a window. C++/GDI is still snappy with 10000 lines while C#/Graphics has difficulty doing 1000 in real-time.

To retain "pretty-print" use

from IPython.display import HTML
HTML(df.to_html(index=False))

if you have some codes in your Page_Load method and you don't want that those execute after button click use if(!IsPostBack) on Page_Load

protected void Page_Load(object sender, EventArgs e)
{
    if (!IsPostBack)
    {
       // put codes here
    }
}

asp:Button is a server control and for send request to server and get response need page refresh. You can use JQuery and Ajax to prevent full Page refresh

You have to use the numeric sort option:

sort -n -k 1,1 File.txt

I am very surprised that nobody here has mentioned the problem of connection and read timeout. It could happen (especially on Android and/or with some crappy network connectivity) that the request will hang and wait forever.

The following code (which also uses Apache IO Commons) takes this into account, and waits max. 5 seconds until it fails:

public static byte[] downloadFile(URL url)
{
    try {
        URLConnection conn = url.openConnection();
        conn.setConnectTimeout(5000);
        conn.setReadTimeout(5000);
        conn.connect(); 

        ByteArrayOutputStream baos = new ByteArrayOutputStream();
        IOUtils.copy(conn.getInputStream(), baos);

        return baos.toByteArray();
    }
    catch (IOException e)
    {
        // Log error and return null, some default or throw a runtime exception
    }
}

Might this fit your needs?

<style>
.scrollable {
  overflow-x: hidden;
  overflow-y: hidden;
  height: 123px;
  max-height: 123px;
}
</style>

<table border=0><tr><td>
  A constricted table cell
</td><td align=right width=50%>
  By Jarett Lloyd
</td></tr><tr><td colspan=3 width=100%>
  <hr>
  you CAN restrict the height of a table cell, so long as the contents are<br>
  encapsulated by a `&lt;div>`<br>
  i am unable to get horizontal scroll to work.<br>
  long lines cause the table to widen.<br>
  tested only in google chrome due to sheer laziness - JK!!<br>
  most browsers will likely render this as expected<br>
  i've tried many different ways, but this seems to be the only nice way.<br><br>
</td></tr><tr><td colspan=3 height=123 width=100% style="border: 3px inset blue; color: white; background-color: black;">
  <div class=scrollable style="height: 100%; width: 100%;" valign=top>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
    is this suitable??<br>
  </div>

Small performance test comparision for three solutions:

1. $(".link").prop('href',"https://example.com")
2. $(".link").attr('href',"https://example.com")
3. document.querySelector(".link").href="https://example.com";

Here you can perform test by yourself https://jsperf.com/a-href-js-change

We can read href values in following ways

1. let href = $(selector).prop('href');
2. let href = $(selector).attr('href');
3. let href = document.querySelector(".link").href;

Here you can perform test by yourself https://jsperf.com/a-href-js-read

The file system of the container is in the data folder of docker, normally in /var/lib/docker. In order to start and inspect a running containers file system do the following:

hash=$(docker run busybox)
cd /var/lib/docker/aufs/mnt/$hash

And now the current working directory is the root of the container.

With the latest SDK-Tools, you can now use a tool called the apkanalyzer to print out the AndroidManifest.xml of an APK (as well as other parts, such as resources).

[android sdk]/tools/bin/apkanalyzer manifest print [app.apk]

apkanalyzer

Current Working Directory: os.getcwd()

And the __file__ attribute can help you find out where the file you are executing is located. This SO post explains everything: How do I get the path of the current executed file in Python?

Since you may have more than one legends in a plot, a way to selectively remove just one of the titles without leaving an empty space is to set the name argument of the scale_ function to NULL, i.e.

scale_fill_discrete(name = NULL)

(kudos to @pascal for a comment on another thread)

I'm guessing that when you enter a value into the totals field that value expression somehow gets overwritten.

However, you can take an alternative approach: Create a field for the total value and when either one or two changes update that field.

<li>Total <input type="text" ng-model="total">{{total}}</li>

And change the javascript:

function TodoCtrl($scope) {
    $scope.$watch('one * two', function (value) {
        $scope.total = value;
    });
}

Example fiddle here.

The one that is mark as the solution is the better solution I been found until today, but has a serious problem with 0 (for example, 0.toFixedDown(2) gives -0.01). So I suggest to use this:

Number.prototype.toFixedDown = function(digits) {
  if(this == 0) {
    return 0;
  }
  var n = this - Math.pow(10, -digits)/2;
  n += n / Math.pow(2, 53); // added 1360765523: 17.56.toFixedDown(2) === "17.56"
  return n.toFixed(digits);
}

There are indeed global variables in javascript. You can learn more about scopes, which are helpful in this situation.

Your code could look like this:

<script>
    var count = 1;
    function setColor(btn, color) {
        var property = document.getElementById(btn);
        if (count == 0) {
            property.style.backgroundColor = "#FFFFFF"
            count = 1;        
        }
        else {
            property.style.backgroundColor = "#7FFF00"
            count = 0;
        }
    }
</script>

Hope this helps.

Also do note when specifying DATETIME as DATETIME(3) or like on MySQL 5.7.x, you also have to add the same value for CURRENT_TIMESTAMP(3). If not it will keep throwing 'Invalid default value'.

Did u use schemamigration my_app --initial after renaming old migration folder? Try it. Might work. If not - try to recreate the database and make syncdb+migrate. It worked for me...

You could use this to wrap urllib2:

def URLRequest(url, params, method="GET"):
    if method == "POST":
        return urllib2.Request(url, data=urllib.urlencode(params))
    else:
        return urllib2.Request(url + "?" + urllib.urlencode(params))

That will return a Request object that has result data and response codes.

Use the python glob module to easily list out the files we need.

import glob
path_csv=glob.glob("../data/subfolrder/*.csv")

subprocess.check_output() returns bytes.

so you need to convert '\n' to bytes as well:

 f.write (plaintext + b'\n')

hope this helps

All of you use some strange and complex regex patterns x)

Here's my solution without preg_match :

function getEnumTypes($table, $field) {
    $query = $this->db->prepare("SHOW COLUMNS FROM $table WHERE Field = ?");
    try {$query->execute(array($field));} catch (Exception $e) {error_log($e->getMessage());}
    $types = $query->fetchAll(PDO::FETCH_COLUMN|PDO::FETCH_UNIQUE, 1)[$field];
    return explode("','", trim($types, "enum()'"));
}

If you are behind a proxy, you have to update the settings.xml file (under the conf folder of your MAVEN_HOME, the file itself contains information about the proxy settings) and additionally you may need to update your Eclipse Network Settings (Window->Preferences...-> type Network Connections).

Try using -X or --debug in order to get the debug output, this could provide additional information about the problem.

Just have your menuWraper element call event.stopPropagation() so that its click event doesn't bubble up to the document.

Try it out: http://jsfiddle.net/Py7Mu/

$(document).click(function() {
    alert('clicked outside');
});

$(".menuWraper").click(function(event) {
    alert('clicked inside');
    event.stopPropagation();
});

• http://api.jquery.com/event.stopPropagation/

Alternatively, you could return false; instead of using event.stopPropagation();

Depends what it does. If your app takes up too much memory, or makes calls to functions/classes it shouldn't, SpringBoard may terminate it. However, it will most likely be rejected by Apple, as it does not follow their 7 background uses.

Extracting data from PDF is bound to be fraught with problems. Are the documents created through some kind of automatic process? If so, you might consider converting the PDFs to uncompressed PostScript (try pdf2ps) and seeing if the PostScript contains some sort of regular pattern which you can exploit.

I could care less about IE6, as long as it works in IE8, Firefox 4, and Safari 5

This makes me happy.

Try this: Live Demo

display: table is surprisingly good. Once you don't care about IE7, you're free to use it. It doesn't really have any of the usual downsides of <table>.

CSS:

#container {
    background: #ccc;
    display: table
}
#left, #right {
    display: table-cell
}
#left {
    width: 150px;
    background: #f0f;
    border: 5px dotted blue;
}
#right {
    background: #aaa;
    border: 3px solid #000
}

component.html (What you named you form)

<form [formGroup]="contactForm">

(add click event (click)="clearForm())

<button (click)="onSubmit()" (click)="clearForm()" type="submit" class="btn waves-light" mdbWavesEffect>Send<i class="fa fa-paper-plane-o ml-1"></i></button>

component.ts

 clearForm() {
             this.contactForm.reset();
            }

view all code: https://ewebdesigns.com.au/angular-6-contact-form/ How to add a contact form with firebase

Also see PEP 263 if you are using a non-ascii characterset

Abstract

This PEP proposes to introduce a syntax to declare the encoding of a Python source file. The encoding information is then used by the Python parser to interpret the file using the given encoding. Most notably this enhances the interpretation of Unicode literals in the source code and makes it possible to write Unicode literals using e.g. UTF-8 directly in an Unicode aware editor.

Problem

In Python 2.1, Unicode literals can only be written using the Latin-1 based encoding "unicode-escape". This makes the programming environment rather unfriendly to Python users who live and work in non-Latin-1 locales such as many of the Asian countries. Programmers can write their 8-bit strings using the favorite encoding, but are bound to the "unicode-escape" encoding for Unicode literals.

Proposed Solution

I propose to make the Python source code encoding both visible and changeable on a per-source file basis by using a special comment at the top of the file to declare the encoding.

To make Python aware of this encoding declaration a number of concept changes are necessary with respect to the handling of Python source code data.

Defining the Encoding

Python will default to ASCII as standard encoding if no other encoding hints are given.

To define a source code encoding, a magic comment must be placed into the source files either as first or second line in the file, such as:

      # coding=<encoding name>

or (using formats recognized by popular editors)

      #!/usr/bin/python
      # -*- coding: <encoding name> -*-

or

      #!/usr/bin/python
      # vim: set fileencoding=<encoding name> :

...

No, you can't cast Integer to Long, even though you can convert from int to long. For an individual value which is known to be a number and you want to get the long value, you could use:

Number tmp = getValueByReflection(inv.var1(), classUnderTest, runtimeInstance);
Long value1 = tmp.longValue();

For arrays, it will be trickier...

#Try without dot notation
sample_dict = {'name': 'John', 'age': 29}
print(sample_dict['name']) # John
print(sample_dict['age']) # 29

You may still want to use VARCHAR in cases where you don't always store a hash for the user (i.e. authenticating accounts/forgot login url). Once a user has authenticated/changed their login info they shouldn't be able to use the hash and should have no reason to. You could create a separate table to store temporary hash -> user associations that could be deleted but I don't think most people bother to do this.

Use this property for an Image view such as,

1) android:scaleType="fitXY" - It means the Images will be stretched to fit all the sides of the parent that is based on your ImageView!

2) By using above property, it will affect your Image resolution so if you want to maintain the resolution then add a property such as android:scaleType="centerInside".

You are really asking a couple of questions here:

1) Why does the price of SSL certificates vary so much

2) Where can I get good, cheap SSL certificates?

The first question is a good one. For example, the type of SSL certificate you buy is important. Many SSL certificates are domain verified only - that is, the company issuing the certificate only validate that you own the domain. They don't validate your identity, so people visiting your site might know that the domain has a SSL certificate, but that doesn't mean the person behing the website isn't a scammer or phisher, for example. This is why the Verisign solution is much more expensive - you are getting a cert that not only secures your site, but validates the identity of the owner of the site (well, that's the claim).

You can read more on this subject here

For your second question, I can personally recommend RapidSSL. I've bought several certificates from them in the past and they are, well, rapid. However, you should always do your research first. A company based in France might be better for you to deal with as you can get support in your local hours, etc.

There are many Oracle components that run a web service, so it's not clear which you are referring to.

For example, the web site port for standalone OC4J is configured in the j2ee/home/config/default-web-site.xml file:

<web-site xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/oracleas/schema/web-site-10_0.xsd"
port="8888" display-name="OC4J 10g (10.1.3) Default Web Site"
schema-major-version="10" schema-minor-version="0" > 

yes, this is valid, and under some circumstances it is even useful. Generally, if you don't need it, don't do it.

See the git-pull man page:

git pull [options] [<repository> [<refspec>...]]

and in the examples section:

Merge into the current branch the remote branch next:

$ git pull origin next

So I imagine you want to do something like:

git pull origin dev

To set it up so that it does this by default while you're on the dev branch:

git branch --set-upstream-to dev origin/dev

Use the target attribute on your anchor tag with the _blank value.

Example:

<a href="http://google.com" target="_blank">Click Me!</a>

If you use bootstrap then Update bootstrap css(bootstrap.min.css) file and fonts files. I fixed my problem with this solution.

/// <summary>
/// Builder
/// </summary>
public interface IWebRequestBuilder
{
    IWebRequestBuilder BuildHost(string host);

    IWebRequestBuilder BuildPort(int port);

    IWebRequestBuilder BuildPath(string path);

    IWebRequestBuilder BuildQuery(string query);

    IWebRequestBuilder BuildScheme(string scheme);

    IWebRequestBuilder BuildTimeout(int timeout);

    WebRequest Build();
}

/// <summary>
/// ConcreteBuilder #1
/// </summary>
public class HttpWebRequestBuilder : IWebRequestBuilder
{
    private string _host;

    private string _path = string.Empty;

    private string _query = string.Empty;

    private string _scheme = "http";

    private int _port = 80;

    private int _timeout = -1;

    public IWebRequestBuilder BuildHost(string host)
    {
        _host = host;
        return this;
    }

    public IWebRequestBuilder BuildPort(int port)
    {
        _port = port;
        return this;
    }

    public IWebRequestBuilder BuildPath(string path)
    {
        _path = path;
        return this;
    }

    public IWebRequestBuilder BuildQuery(string query)
    {
        _query = query;
        return this;
    }

    public IWebRequestBuilder BuildScheme(string scheme)
    {
        _scheme = scheme;
        return this;
    }

    public IWebRequestBuilder BuildTimeout(int timeout)
    {
        _timeout = timeout;
        return this;
    }

    protected virtual void BeforeBuild(HttpWebRequest httpWebRequest) {
    }

    public WebRequest Build()
    {
        var uri = _scheme + "://" + _host + ":" + _port + "/" + _path + "?" + _query;

        var httpWebRequest = WebRequest.CreateHttp(uri);

        httpWebRequest.Timeout = _timeout;

        BeforeBuild(httpWebRequest);

        return httpWebRequest;
    }
}

/// <summary>
/// ConcreteBuilder #2
/// </summary>
public class ProxyHttpWebRequestBuilder : HttpWebRequestBuilder
{
    private string _proxy = null;

    public ProxyHttpWebRequestBuilder(string proxy)
    {
        _proxy = proxy;
    }

    protected override void BeforeBuild(HttpWebRequest httpWebRequest)
    {
        httpWebRequest.Proxy = new WebProxy(_proxy);
    }
}

/// <summary>
/// Director
/// </summary>
public class SearchRequest
{

    private IWebRequestBuilder _requestBuilder;

    public SearchRequest(IWebRequestBuilder requestBuilder)
    {
        _requestBuilder = requestBuilder;
    }

    public WebRequest Construct(string searchQuery)
    {
        return _requestBuilder
        .BuildHost("ajax.googleapis.com")
        .BuildPort(80)
        .BuildPath("ajax/services/search/web")
        .BuildQuery("v=1.0&q=" + HttpUtility.UrlEncode(searchQuery))
        .BuildScheme("http")
        .BuildTimeout(-1)
        .Build();
    }

    public string GetResults(string searchQuery) {
        var request = Construct(searchQuery);
        var resp = request.GetResponse();

        using (StreamReader stream = new StreamReader(resp.GetResponseStream()))
        {
            return stream.ReadToEnd();
        }
    }
}

class Program
{
    /// <summary>
    /// Inside both requests the same SearchRequest.Construct(string) method is used.
    /// But finally different HttpWebRequest objects are built.
    /// </summary>
    static void Main(string[] args)
    {
        var request1 = new SearchRequest(new HttpWebRequestBuilder());
        var results1 = request1.GetResults("IBM");
        Console.WriteLine(results1);

        var request2 = new SearchRequest(new ProxyHttpWebRequestBuilder("localhost:80"));
        var results2 = request2.GetResults("IBM");
        Console.WriteLine(results2);
    }
}

In case you were looking to transform your column number into a letter:

Function ConvertToLetter(iCol As Integer) As String
    Dim iAlpha As Integer
    Dim iRemainder As Integer
    iAlpha = Int(iCol / 27)
    iRemainder = iCol - (iAlpha * 26)
    If iAlpha > 0 Then
        ConvertToLetter = Chr(iAlpha + 64)
    End If
    If iRemainder > 0 Then
        ConvertToLetter = ConvertToLetter & Chr(iRemainder + 64)
    End If
End Function

This way you could do something like this:

Function selectColumnRange(colNum As Integer, targetWorksheet As Worksheet)
    Dim colLetter As String
    Dim testRange As Range
    colLetter = ConvertToLetter(colNum)
    testRange = targetWorksheet.Range(colLetter & ":" & colLetter).Select
End Function

That example function would select the entire column ( i.e. Range("A:A").Select)

Source: http://support.microsoft.com/kb/833402

There are two methods in jQuery to check for visibility:

$("#selector").is(":visible")

and

$("#selector").is(":hidden")

You can also execute commands based on visibility in the selector;

$("#selector:visible").hide()

or

$("#selector:hidden").show()

You don't need regex for this

>>> s = "Username: How are you today?"

You can use the split method to split the string on the ':' character

>>> s.split(':')
['Username', ' How are you today?']

And slice out element [0] to get the first part of the string

>>> s.split(':')[0]
'Username'

You don't need any special code to do this, because it is what a dictionary already does. When you fetch dict[key] you know whether the dictionary contains the key, because the Optional that you get back is not nil (and it contains the value).

So, if you just want to answer the question whether the dictionary contains the key, ask:

let keyExists = dict[key] != nil

If you want the value and you know the dictionary contains the key, say:

let val = dict[key]!

But if, as usually happens, you don't know it contains the key - you want to fetch it and use it, but only if it exists - then use something like if let:

if let val = dict[key] {
    // now val is not nil and the Optional has been unwrapped, so use it
}

/favicon.ico

might do the trick
I have tried this on my sample website

<link rel="shortcut icon" type="image/x-icon" href="~/ows.ico" />

Try this one in your site put the link in MasterPage,It works :)

<link rel="shortcut icon" type="image/x-icon" href="~/favicon.ico" />

I have tested in ,
FireFox.

Chrome.

Opera.

Some troubleshoots:
1. Check if your favicon is accessible (correct url) ,goto view source and click on the favicon link
2. Full refresh your browser by Ctrl+F5 every time you make changes.
3. Try searching from SO you may find your related problem here.

Some Links to help you out:
Serving favicon.ico in ASP.NET MVC
Favicon Not Showing
Why is favicon not visible

If it is on the stack, the contents of uninitialized members that don't have their own constructor will be random and undefined. Even if it is global, it would be a bad idea to rely on them being zeroed out. Whether it is on the stack or not, if a member has its own constructor, that will get called to initialize it.

So, if you have string* pname, the pointer will contain random junk. but for string name, the default constructor for string will be called, giving you an empty string. For your reference type variables, I'm not sure, but it'll probably be a reference to some random chunk of memory.

If you are willing to use a 3rd party service, auth0.com supports this integration. The auth0 service exchanges a 3rd party SSO service authentication for an AWS temporary session token will limited permissions.

See: https://github.com/auth0-samples/auth0-s3-sample/
and the auth0 documentation.

I upgraded to my Git for Windows to latest (2.30.0) 64-bit and it works fine now. get the latest from the url https://git-scm.com/download/win and run the commands below to verify. $ git --version $ git version 2.30.0.windows.1

A new option is the Visual Studio Emulator for Android--it's fast, Hyper-V, x86, and free to download even without VS.

You have two options to drop and recreate the procedure in SQL Server 2016.

Starting from SQL Server 2016 - use IF EXISTS

DROP FUNCTION [ IF EXISTS ] { [ schema_name. ] function_name } [ ,...n ]   [;]

Starting from SQL Server 2016 SP1 - use OR ALTER

CREATE [ OR ALTER ] FUNCTION [ schema_name. ] function_name   

I just found this when googling to solve the same problem, and had to make a minor change to the solution to make it work in my situation, as I had 2 similar substrings, "Sun" and "Sunstruck" to search for. The offered solution was locating the wrong entry when searching for "Sun". Data in column B

I added another column C, formulaes C1=" "&B1&" " and changed the search to =COUNTIF(B1:B10,"* "&A1&" *")>0, the extra column to allow finding the first of last entry in the concatenated string.

ListView has the Item click listener callback. You should set the onItemClickListener in the ListView. Callback contains AdapterView and position as parameter. Which can give you the ListEntry.

lv.setOnItemClickListener(new OnItemClickListener() {
            @Override
            public void onItemClick(AdapterView<?> parent, View view, int position,
                    long id) {
                ListEntry entry= (ListEntry) parent.getAdapter().getItem(position);
                Intent intent = new Intent(MainActivity.this, SendMessage.class);
                String message = entry.getMessage();
                intent.putExtra(EXTRA_MESSAGE, message);
                startActivity(intent);
            }
        });

That is not HTML, but PHP. It is called the HEREDOC string method, and is an alternative to using quotes for writing multiline strings.

The HTML in your example will be:

    <tr>
      <td>TEST</td>
    </tr>

Read the PHP documentation that explains it.

I my be late to party and I came across same problem and Google pointed me to this StackOverflow thread as first result.

I tried using xml way to add triangle and find out a problem that the triangle shape via xml approach is taking more space than it appears.

See screen shot with layout bounds on

So ended up making this custom view class which can draws Triangle of any of following types:-

1. up pointing
2. down pointing
3. left pointing &
4. right pointing

asas

package com.hiteshsahu.materialupvotewidget;    
import android.content.Context;
import android.graphics.Canvas;
import android.graphics.Color;
import android.graphics.Paint;
import android.graphics.Path;
import android.support.annotation.NonNull;
import android.util.AttributeSet;
import android.view.View;

public class TriangleShapeView extends View {

    private int colorCode = Color.DKGRAY;

    public int getColorCode() {
        return colorCode;
    }

    public void setColorCode(int colorCode) {
        this.colorCode = colorCode;
    }

    public TriangleShapeView(Context context) {
        super(context);
        if (isInEditMode())
            return;
    }

    public TriangleShapeView(Context context, AttributeSet attrs) {
        super(context, attrs);
        if (isInEditMode())
            return;
    }

    public TriangleShapeView(Context context, AttributeSet attrs, int defStyle) {
        super(context, attrs, defStyle);

        if (isInEditMode())
            return;
    }


    protected void onDraw(Canvas canvas) {
        super.onDraw(canvas);
        int w = getWidth() / 2;
        int h = getHeight() / 2;

        //Choose what type of triangle you want here
        Path path = getLeftTriangle(w, h);

        path.close();
        Paint p = new Paint();
        p.setColor(colorCode);
        p.setAntiAlias(true);

        canvas.drawPath(path, p);
    }

    @NonNull
    /**
     * Return Path for down facing triangle
     */
    private Path getInvertedTriangle(int w, int h) {
        Path path = new Path();
        path.moveTo(0, 0);
        path.lineTo(w, 2 * h);
        path.lineTo(2 * w, 0);
        path.lineTo(0, 0);
        return path;
    }

    @NonNull
    /**
     * Return Path for Up facing triangle
     */
    private Path getUpTriangle(int w, int h) {
        Path path = new Path();
        path.moveTo(0, 2 * h);
        path.lineTo(w, 0);
        path.lineTo(2 * w, 2 * h);
        path.lineTo(0, 2 * h);
        return path;
    }

    @NonNull
    /**
     * Return Path for Right pointing triangle
     */
    private Path getRightTriangle(int w, int h) {
        Path path = new Path();
        path.moveTo(0, 0);
        path.lineTo(2 * w, h);
        path.lineTo(0, 2 * h);
        path.lineTo(0, 0);
        return path;
    }

    @NonNull
    /**
     * Return Path for Left pointing triangle
     */
    private Path getLeftTriangle(int w, int h) {
        Path path = new Path();
        path.moveTo(2 * w, 0);
        path.lineTo(0, h);
        path.lineTo(2 * w, 2 * h);
        path.lineTo(2 * w, 0);
        return path;
    }
}

You can Simply use it in xml layout like this

 <com.hiteshsahu.materialupvote.TriangleShapeView
            android:layout_width="50dp"
            android:layout_height="50dp"></com.hiteshsahu.materialupvote.TriangleShapeView>

I know OP want solutions in xml solution but as I pointed out problem with xml approach . I Hope it might help somebody.

I am about 8 years late, well...anyways, I don't really know what then() does but maybe MDN might have an answer. Actually, I might actually understand it a little more.

This will show you all the information (hopefully), you need. Unless someone already posted this link. https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Promise/then

The format is promise.prototype.then() The promise and prototype are kind of like variables but not like variables in javascript, I mean like other things go there like navigator.getBattery().then() where this one actually exists but is barely used on the web, this one shows statuses about the battery of the device, more information and more on MDN if you are curious.

How about:

(sleep 5; echo "Hello World") &

This is what I am using for learning sql: employees-db

this is a sample database with an integrated test suite, used to test your applications and database servers

3rd party edit

According to launchpad.net the database has moved to github.

The database contains about 300,000 employee records with 2.8 million salary entries. The export data is 167 MB, which is not huge, but heavy enough to be non-trivial for testing.

The data was generated, and as such there are inconsistencies and subtle problems. Rather than removing them, we decided to leave the contents untouched, and use these issues as data cleaning exercises.

You could make a helper function:

function setAttributes(el, attrs) {
  for(var key in attrs) {
    el.setAttribute(key, attrs[key]);
  }
}

Call it like this:

setAttributes(elem, {"src": "http://example.com/something.jpeg", "height": "100%", ...});

If you don't care about supporting old browsers, you can use :not() to exclude that element:

.parent:hover span:not(:hover) {
    border: 10px solid red;
}

Demo: http://jsfiddle.net/vz9A9/1/

If you do want to support them, the I guess you'll have to either use JavaScript or override the CSS properties again:

.parent span:hover {
    border: 10px solid green;
}

You can use --python option to npm like so:

npm install --python=python2.7

or set it to be used always:

npm config set python python2.7

Npm will in turn pass this option to node-gyp when needed.

(note: I'm the one who opened an issue on Github to have this included in the docs, as there were so many questions about it ;-) )

The reference for the user-specific configuration for Maven is available on-line and it doesn't make much sense to share a settings.xml with you since these settings are user specific.

If you need to configure a proxy, have a look at the section about Proxies.

<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0
                      http://maven.apache.org/xsd/settings-1.0.0.xsd">
  ...
  <proxies>
    <proxy>
      <id>myproxy</id>
      <active>true</active>
      <protocol>http</protocol>
      <host>proxy.somewhere.com</host>
      <port>8080</port>
      <username>proxyuser</username>
      <password>somepassword</password>
      <nonProxyHosts>*.google.com|ibiblio.org</nonProxyHosts>
    </proxy>
  </proxies>
  ...
</settings>

• id: The unique identifier for this proxy. This is used to differentiate between proxy elements.
• active: true if this proxy is active. This is useful for declaring a set of proxies, but only one may be active at a time.
• protocol, host, port: The protocol://host:port of the proxy, seperated into discrete elements.
• username, password: These elements appear as a pair denoting the login and password required to authenticate to this proxy server.
• nonProxyHosts: This is a list of hosts which should not be proxied. The delimiter of the list is the expected type of the proxy server; the example above is pipe delimited - comma delimited is also common

Starting with Node.js 11, the url.parse and other methods of the Legacy URL API were deprecated (only in the documentation, at first) in favour of the standardized WHATWG URL API. The new API does not offer parsing the query string into an object. That can be achieved using tthe querystring.parse method:

// Load modules to create an http server, parse a URL and parse a URL query.
const http = require('http');
const { URL } = require('url');
const { parse: parseQuery } = require('querystring');

// Provide the origin for relative URLs sent to Node.js requests.
const serverOrigin = 'http://localhost:8000';

// Configure our HTTP server to respond to all requests with a greeting.
const server = http.createServer((request, response) => {
  // Parse the request URL. Relative URLs require an origin explicitly.
  const url = new URL(request.url, serverOrigin);
  // Parse the URL query. The leading '?' has to be removed before this.
  const query = parseQuery(url.search.substr(1));
  response.writeHead(200, { 'Content-Type': 'text/plain' });
  response.end(`Hello, ${query.name}!\n`);
});

// Listen on port 8000, IP defaults to 127.0.0.1.
server.listen(8000);

// Print a friendly message on the terminal.
console.log(`Server running at ${serverOrigin}/`);

If you run the script above, you can test the server response like this, for example:

curl -q http://localhost:8000/status?name=ryan
Hello, ryan!

Some other options if you do not want your own "Utils"-class:

Use Apache commons lang (ArrayUtils):

@Test
public void arrayCommonLang(){
    char[] test = {'h', 'e', 'l', 'l', 'o'};
    Assert.assertTrue(ArrayUtils.contains(test, 'o'));
    Assert.assertFalse(ArrayUtils.contains(test, 'p'));
}

Or use the builtin Arrays:

@Test
public void arrayTest(){
    char[] test = {'h', 'e', 'l', 'l', 'o'};
    Assert.assertTrue(Arrays.binarySearch(test, 'o') >= 0);
    Assert.assertTrue(Arrays.binarySearch(test, 'p') < 0);
}

Or use the Chars class from Google Guava:

@Test
public void testGuava(){
    char[] test = {'h', 'e', 'l', 'l', 'o'};
    Assert.assertTrue(Chars.contains(test, 'o'));
    Assert.assertFalse(Chars.contains(test, 'p'));
}

Slightly off-topic, the Chars class allows to find a subarray in an array.

There is a built-in function in bytearray that does what you intend.

bytearray.fromhex("de ad be ef 00")

It returns a bytearray and it reads hex strings with or without space separator.

You can use array_intersect().

$result = !empty(array_intersect($people, $criminals));

If your margin is set on the body, then setting the background color of the html tag should color the margin area

html { background-color: black; }
body { margin:50px; background-color: white; }

http://jsfiddle.net/m3zzb/

Or as dmackerman suggestions, set a margin of 0, but a border of the size you want the margin to be and set the border-color

You can find the commit id related to each commit in the commits section of GitHub/BitBucket/Gitlab. Its very simple, suppose your commit id is 5889575 then if you want to go back to this part in your code then you simply need to type

git checkout 5889575 .

This will take you to that point of time in your code.

The R-squared is not dependent on the number of variables in the model. The adjusted R-squared is.

The adjusted R-squared adds a penalty for adding variables to the model that are uncorrelated with the variable your trying to explain. You can use it to test if a variable is relevant to the thing your trying to explain.

Adjusted R-squared is R-squared with some divisions added to make it dependent on the number of variables in the model.

It's usually based on significant figures of both the exponent and significand in base 2, not base 10. From what I can tell in the C99 standard, however, there is no specified precision for floats and doubles (other than the fact that 1 and 1 + 1E-5 / 1 + 1E-7 are distinguishable [float and double repsectively]). However, the number of significant figures is left to the implementer (as well as which base they use internally, so in other words, an implementation could decide to make it based on 18 digits of precision in base 3). [1]

If you need to know these values, the constants FLT_RADIX and FLT_MANT_DIG (and DBL_MANT_DIG / LDBL_MANT_DIG) are defined in float.h.

The reason it's called a double is because the number of bytes used to store it is double the number of a float (but this includes both the exponent and significand). The IEEE 754 standard (used by most compilers) allocate relatively more bits for the significand than the exponent (23 to 9 for float vs. 52 to 12 for double), which is why the precision is more than doubled.

1: Section 5.2.4.2.2 ( http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf )

Stop abusing private fields!!!

The comments here seem to be overwhelmingly supportive towards using private fields. Well, then I have something different to say.

Are private fields good in principle? Yes. But saying that a golden rule is make everything private when you're not sure is definitely wrong! You won't see the problem until you run into one. In my opinion, you should mark fields as protected if you're not sure.

There are two cases you want to extend a class:

• You want to add extra functionality to a base class
• You want to modify existing class that's outside the current package (in some libraries perhaps)

There's nothing wrong with private fields in the first case. The fact that people are abusing private fields makes it so frustrating when you find out you can't modify shit.

Consider a simple library that models cars:

class Car {
    private screw;
    public assembleCar() {
       screw.install();
    };
    private putScrewsTogether() {
       ...
    };
}

The library author thought: there's no reason the users of my library need to access the implementation detail of assembleCar() right? Let's mark screw as private.

Well, the author is wrong. If you want to modify only the assembleCar() method without copying the whole class into your package, you're out of luck. You have to rewrite your own screw field. Let's say this car uses a dozen of screws, and each of them involves some untrivial initialization code in different private methods, and these screws are all marked private. At this point, it starts to suck.

Yes, you can argue with me that well the library author could have written better code so there's nothing wrong with private fields. I'm not arguing that private field is a problem with OOP. It is a problem when people are using them.

The moral of the story is, if you're writing a library, you never know if your users want to access a particular field. If you're unsure, mark it protected so everyone would be happier later. At least don't abuse private field.

I very much support Nick's answer.

Run your program with

python -t script.py

This will warn you if you have mixed tabs and spaces.

On *nix systems, you can see where the tabs are by running

cat -A script.py

and you can automatically convert tabs to 4 spaces with the command

expand -t 4 script.py > fixed_script.py

PS. Be sure to use a programming editor (e.g. emacs, vim), not a word processor, when programming. You won't get this problem with a programming editor.

PPS. For emacs users, M-x whitespace-mode will show the same info as cat -A from within an emacs buffer!

No, there isn't, but you could whip one up:

jQuery.fn.swapWith = function(to) {
    return this.each(function() {
        var copy_to = $(to).clone(true);
        var copy_from = $(this).clone(true);
        $(to).replaceWith(copy_from);
        $(this).replaceWith(copy_to);
    });
};

Usage:

$(selector1).swapWith(selector2);

Note this only works if the selectors only match 1 element each, otherwise it could give weird results.

$array = array(0 => 100, "color" => "red");
print_r(array_keys($array));

Go strings are not null terminated, and to remove the last char of a string you can simply do:

s = s[:len(s)-1]

You could use setInterval for this.

<script type="text/javascript">
function myFunction () {
    console.log('Executed!');
}

var interval = setInterval(function () { myFunction(); }, 60000);
</script>

Disable the timer by setting clearInterval(interval).

See this Fiddle: http://jsfiddle.net/p6NJt/2/

Edit: you should now use brew services start mongodb, as in Gergo's answer...

When you install/upgrade mongodb, brew will tell you what to do:

To have launchd start mongodb at login:

    ln -sfv /usr/local/opt/mongodb/*.plist ~/Library/LaunchAgents

Then to load mongodb now:

    launchctl load ~/Library/LaunchAgents/homebrew.mxcl.mongodb.plist

Or, if you don't want/need launchctl, you can just run:

    mongod

It works perfectly.

I had a problem where it did not allow me to insert it even after setting the IDENTITY_INSERT ON.

The problem was that i did not specify the column names and for some reason it did not like it.

INSERT INTO tbl Values(vals)

So basically do the full INSERT INTO tbl(cols) Values(vals)

Springboot (via Spring) now makes adding to existing resource handlers easy. See Dave Syers answer. To add to the existing static resource handlers, simply be sure to use a resource handler path that doesn't override existing paths.

The two "also" notes below are still valid.

. . .

[Edit: The approach below is no longer valid]

If you want to extend the default static resource handlers, then something like this seems to work:

@Configuration
@AutoConfigureAfter(DispatcherServletAutoConfiguration.class)
public class CustomWebMvcAutoConfig extends
                    WebMvcAutoConfiguration.WebMvcAutoConfigurationAdapter {

  @Override
  public void addResourceHandlers(ResourceHandlerRegistry registry) {
    String myExternalFilePath = "file:///C:/Temp/whatever/m/";

    registry.addResourceHandler("/m/**").addResourceLocations(myExternalFilePath);

    super.addResourceHandlers(registry);
  }

}

The call to super.addResourceHandlers sets up the default handlers.

Also:

• Note the trailing slash on the external file path. (Depends on your expectation for URL mappings).
• Consider reviewing the source code of WebMvcAutoConfigurationAdapter.

I don't know what your string is, but I'm going to assume that it manages its own memory.

You have two solutions:

1: Return a struct which contains all the types you need.

struct Tuple {
    int a;
    string b;
};

struct Tuple getPair() {
    Tuple r = { 1, getString() };
    return r;
}

void foo() {
    struct Tuple t = getPair();
}

2: Use pointers to pass out values.

void getPair(int* a, string* b) {
    // Check that these are not pointing to NULL
    assert(a);
    assert(b);
    *a = 1;
    *b = getString();
}

void foo() {
    int a, b;
    getPair(&a, &b);
}

Which one you choose to use depends largely on personal preference as to whatever semantics you like more.

Try using this blink plugin

For Example

$('.blink').blink(); // default is 500ms blink interval.
//$('.blink').blink(100); // causes a 100ms blink interval.

It is also a very simple plugin, and you could probably extend it to stop the animation and start it on demand.

Store your data in temp table

Select * into tempTable from table1

Now update the column

 UPDATE table1
    SET table1.FileName = (select FileName from tempTable where tempTable.id = table1.ID);

• You have to choose the processor architecture of unit tests in Visual Studio: menu Test ? Test Settings ? Default processor architecture

• Test Adapter has to be open to see the tests: (Visual Studio e.g.: menu Test ? Windows ? Test Explorer

Additional information what's going on, you can consider at the Visual Studio 'Output-Window' and choose the dropdown 'Show output from' and set 'Tests'.

In JavaScript everything is an object

console.log(type of({}))  //Object
console.log(type of([]))  //Object

To get Real type , use this

console.log(Object.prototype.toString.call({}))   //[object Object]
console.log(Object.prototype.toString.call([]))   //[object Array]

Hope this helps

For basic autocompletion, have a look at the files in %ProgramFiles%\Notepad++\plugins\APIs. It's basically just an XML file with keywords in. If you want calltips ("function parameters hint"), check out these instructions.

I've never found any more documentation, but cpp.xml has a calltip for fopen, while php.xml is quite complete.

Best use magic set/get methods with predefined custom set/get Methods as in example below. This way you can combine best of two worlds. In terms of speed I agree that they are a bit slower but can you even feel the difference. Example below also validate the data array against predefined setters.

"The magic methods are not substitutes for getters and setters. They just allow you to handle method calls or property access that would otherwise result in an error."

This is why we should use both.

CLASS ITEM EXAMPLE

    /*
    * Item class
    */
class Item{
    private $data = array();

    function __construct($options=""){ //set default to none
        $this->setNewDataClass($options); //calling function
    }

    private function setNewDataClass($options){
        foreach ($options as $key => $value) {
            $method = 'set'.ucfirst($key); //capitalize first letter of the key to preserve camel case convention naming
            if(is_callable(array($this, $method))){  //use seters setMethod() to set value for this data[key];      
                $this->$method($value); //execute the setters function
            }else{
                $this->data[$key] = $value; //create new set data[key] = value without seeters;
            }   
        }
    }

    private function setNameOfTheItem($value){ // no filter
        $this->data['name'] = strtoupper($value); //assign the value
        return $this->data['name']; // return the value - optional
    }

    private function setWeight($value){ //use some kind of filter
        if($value >= "100"){ 
            $value = "this item is too heavy - sorry - exceeded weight of maximum 99 kg [setters filter]";
        }
        $this->data['weight'] = strtoupper($value); //asign the value
        return $this->data['weight']; // return the value - optional
    }

    function __set($key, $value){
        $method = 'set'.ucfirst($key); //capitalize first letter of the key to preserv camell case convention naming
        if(is_callable(array($this, $method))){  //use seters setMethod() to set value for this data[key];      
            $this->$method($value); //execute the seeter function
        }else{
            $this->data[$key] = $value; //create new set data[key] = value without seeters;
        }
    }

    function __get($key){
        return $this->data[$key];
    }

    function dump(){
        var_dump($this);
    }
}

INDEX.PHP

$data = array(
    'nameOfTheItem' => 'tv',
    'weight' => '1000',
    'size' => '10x20x30'
);

$item = new Item($data);
$item->dump();

$item->somethingThatDoNotExists = 0; // this key (key, value) will trigger magic function __set() without any control or check of the input,
$item->weight = 99; // this key will trigger predefined setter function of a class - setWeight($value) - value is valid,
$item->dump();

$item->weight = 111; // this key will trigger predefined setter function of a class - setWeight($value) - value invalid - will generate warning.
$item->dump(); // display object info

OUTPUT

object(Item)[1]
  private 'data' => 
    array (size=3)
      'name' => string 'TV' (length=2)
      'weight' => string 'THIS ITEM IS TOO HEAVY - SORRY - EXIDED WEIGHT OF MAXIMUM 99 KG [SETTERS FILTER]' (length=80)
      'size' => string '10x20x30' (length=8)
object(Item)[1]
  private 'data' => 
    array (size=4)
      'name' => string 'TV' (length=2)
      'weight' => string '99' (length=2)
      'size' => string '10x20x30' (length=8)
      'somethingThatDoNotExists' => int 0
object(Item)[1]
  private 'data' => 
    array (size=4)
      'name' => string 'TV' (length=2)
      'weight' => string 'THIS ITEM IS TOO HEAVY - SORRY - EXIDED WEIGHT OF MAXIMUM 99 KG [SETTERS FILTER]' (length=80)
      'size' => string '10x20x30' (length=8)
      'somethingThatDoNotExists' => int 0

In single threads, StringBuffer is not significantly slower than StringBuilder, thanks to JVM optimisations. And in multithreading, you can't use safely a StringBuilder.

Here is my test (not a benchmark, just a test) :

public static void main(String[] args) {

    String withString ="";
    long t0 = System.currentTimeMillis();
    for (int i = 0 ; i < 100000; i++){
        withString+="some string";
    }
    System.out.println("strings:" + (System.currentTimeMillis() - t0));

    t0 = System.currentTimeMillis();
    StringBuffer buf = new StringBuffer();
    for (int i = 0 ; i < 100000; i++){
        buf.append("some string");
    }
    System.out.println("Buffers : "+(System.currentTimeMillis() - t0));

    t0 = System.currentTimeMillis();
    StringBuilder building = new StringBuilder();
    for (int i = 0 ; i < 100000; i++){
        building.append("some string");
    }
    System.out.println("Builder : "+(System.currentTimeMillis() - t0));
}

Results :
strings: 319740
Buffers : 23
Builder : 7 !

So Builders are faster than Buffers, and WAY faster than strings concatenation. Now let's use an Executor for multiple threads :

public class StringsPerf {

    public static void main(String[] args) {

        ThreadPoolExecutor executorService = (ThreadPoolExecutor) Executors.newFixedThreadPool(10);
        //With Buffer
        StringBuffer buffer = new StringBuffer();
        for (int i = 0 ; i < 10; i++){
            executorService.execute(new AppendableRunnable(buffer));
        }
        shutdownAndAwaitTermination(executorService);
        System.out.println(" Thread Buffer : "+ AppendableRunnable.time);

        //With Builder
        AppendableRunnable.time = 0;
        executorService = (ThreadPoolExecutor) Executors.newFixedThreadPool(10);
        StringBuilder builder = new StringBuilder();
        for (int i = 0 ; i < 10; i++){
            executorService.execute(new AppendableRunnable(builder));
        }
        shutdownAndAwaitTermination(executorService);
        System.out.println(" Thread Builder: "+ AppendableRunnable.time);

    }

   static void shutdownAndAwaitTermination(ExecutorService pool) {
        pool.shutdown(); // code reduced from Official Javadoc for Executors
        try {
            if (!pool.awaitTermination(60, TimeUnit.SECONDS)) {
                pool.shutdownNow();
                if (!pool.awaitTermination(60, TimeUnit.SECONDS))
                    System.err.println("Pool did not terminate");
            }
        } catch (Exception e) {}
    }
}

class AppendableRunnable<T extends Appendable> implements Runnable {

    static long time = 0;
    T appendable;
    public AppendableRunnable(T appendable){
        this.appendable = appendable;
    }

    @Override
    public void run(){
        long t0 = System.currentTimeMillis();
        for (int j = 0 ; j < 10000 ; j++){
            try {
                appendable.append("some string");
            } catch (IOException e) {}
        }
        time+=(System.currentTimeMillis() - t0);
    }
}

Now StringBuffers take 157 ms for 100000 appends. It's not the same test, but compared to the previous 37 ms, you can safely assume that StringBuffers appends are slower with multithreading use. The reason is that the JIT/hotspot/compiler/something makes optimizations when it detects that there is no need for checking locks.

But with StringBuilder, you have java.lang.ArrayIndexOutOfBoundsException, because a concurrent thread tries to add something where it should not.

Conclusion is that you don't have to chase StringBuffers. And where you have threads, think about what they are doing, before trying to gain a few nanoseconds.

There are already a lot of good answers here. For fun, I implemented this solution below, based on the other answers and my own ideas.

<input class="adjust">

The input element is adjusted pixel accurate and an additional offset can be defined.

function adjust(elements, offset, min, max) {

    // Initialize parameters
    offset = offset || 0;
    min    = min    || 0;
    max    = max    || Infinity;
    elements.each(function() {
        var element = $(this);

        // Add element to measure pixel length of text
        var id = btoa(Math.floor(Math.random() * Math.pow(2, 64)));
        var tag = $('<span id="' + id + '">' + element.val() + '</span>').css({
            'display': 'none',
            'font-family': element.css('font-family'),
            'font-size': element.css('font-size'),
        }).appendTo('body');

        // Adjust element width on keydown
        function update() {

            // Give browser time to add current letter
            setTimeout(function() {

                // Prevent whitespace from being collapsed
                tag.html(element.val().replace(/ /g, '&nbsp'));

                // Clamp length and prevent text from scrolling
                var size = Math.max(min, Math.min(max, tag.width() + offset));
                if (size < max)
                    element.scrollLeft(0);

                // Apply width to element
                element.width(size);
            }, 0);
        };
        update();
        element.keydown(update);
    });
}

// Apply to our element
adjust($('.adjust'), 10, 100, 500);

The adjustment gets smoothed with a CSS transition.

.adjust {
    transition: width .15s;
}

Here is the fiddle. I hope this can help others looking for a clean solution.

Here's my take if you want to try using multiprocesses to process each row of numpy array,

from multiprocessing import Pool
import numpy as np

def my_function(x):
    pass     # do something and return something

if __name__ == '__main__':    
    X = np.arange(6).reshape((3,2))
    pool = Pool(processes = 4)
    results = pool.map(my_function, map(lambda x: x, X))
    pool.close()
    pool.join()

pool.map take in a function and an iterable.
I used 'map' function to create an iterator over each rows of the array.
Maybe there's a better to create the iterable though.

You should be able to do this by checking the value of $_SERVER['HTTPS'] (it should only be set when using https).

See http://php.net/manual/en/reserved.variables.server.php.

Google App Engine users : If you're moving from Django to Jinja2, and looking to replace the date filter, note that the % formatting codes are different.

The strftime % codes are here: http://docs.python.org/2/library/datetime.html#strftime-and-strptime-behavior

Specify the /g (global) flag on the regular expression to replace all matches instead of just the first:

string.replace(/_/g, ' ').replace(/#/g, '')

To replace one character with one thing and a different character with something else, you can't really get around needing two separate calls to replace. You can abstract it into a function as Doorknob did, though I would probably have it take an object with old/new as key/value pairs instead of a flat array.

Check your email. You should have issue or missing report on you email. I got email that I miss NSCameraUsageDescription key in Info.plist

If BranchA has not been pushed to a remote then you can reorder the commits using rebase and then simply merge. It's preferable to use merge over rebase when possible because it doesn't create duplicate commits.

git checkout BranchA
git rebase -i HEAD~113
... reorder the commits so the 10 you want are first ...
git checkout BranchB
git merge [the 10th commit]

Complement with an additional example, you can access all job parameters in JavaConfig class:

@Bean
@StepScope
public ItemStreamReader<GenericMessage> reader(@Value("#{jobParameters}") Map<String,Object> jobParameters){
          ....
}

The functions _compile_select() and _reset_select() are deprecated.
Instead use get_compiled_select():

#Create where clause
$this->db->select('id_cer');
$this->db->from('revokace');
$where_clause = $this->db->get_compiled_select();

#Create main query
$this->db->select('*');
$this->db->from('certs');
$this->db->where("`id` NOT IN ($where_clause)", NULL, FALSE);

You'd need to remove the blank table cell element entirely, and change the colspan attribute on another cell in the row to encompass the released space, e.g.:

refToCellToRemove.remove();
refTocellToExpand.colspan = 4;

Note that setting it via setAttribute (which would otherwise be correct) will not work properly on IE.

Beware: IE does some very strange table layout things when you muck about with colspans dynamically. If you can avoid it, I would.

PEP-8 recommends you indent lines to the opening parentheses if you put anything on the first line, so it should either be indenting to the opening bracket:

urlpatterns = patterns('',
                       url(r'^$', listing, name='investment-listing'))

or not putting any arguments on the starting line, then indenting to a uniform level:

urlpatterns = patterns(
    '',
    url(r'^$', listing, name='investment-listing'),
)

urlpatterns = patterns(
    '', url(r'^$', listing, name='investment-listing'))

I suggest taking a read through PEP-8 - you can skim through a lot of it, and it's pretty easy to understand, unlike some of the more technical PEPs.

Taking in consideration the other answers I would do something like this, thanks!

.table-responsive {
    @include media-breakpoint-up(md) {
        display: table;
    }
}

If you want to use straight PowerShell check out the below code.

$content = Get-Content C:\Users\You\Documents\test.txt
foreach ($line in $content)
{
    Write-Host $line
}

You will need to do a couple of things to get this going, since your parameter is getting multiple values you need to create a Table Type and make your store procedure accept a parameter of that type.

Split Function Works Great when you are getting One String containing multiple values but when you are passing Multiple values you need to do something like this....

TABLE TYPE

CREATE TYPE dbo.TYPENAME AS TABLE   (     arg int    )  GO 

Stored Procedure to Accept That Type Param

 CREATE PROCEDURE mainValues   @TableParam TYPENAME READONLY  AS     BEGIN     SET NOCOUNT ON;   --Temp table to store split values   declare @tmp_values table (   value nvarchar(255) not null);        --function splitting values     INSERT INTO @tmp_values (value)    SELECT arg FROM @TableParam      SELECT * FROM @tmp_values  --<-- For testing purpose END 

EXECUTE PROC

Declare a variable of that type and populate it with your values.

 DECLARE @Table TYPENAME     --<-- Variable of this TYPE   INSERT INTO @Table                --<-- Populating the variable   VALUES (331),(222),(876),(932)  EXECUTE mainValues @Table   --<-- Stored Procedure Executed  

Result

╔═══════╗ ║ value ║ ╠═══════╣ ║   331 ║ ║   222 ║ ║   876 ║ ║   932 ║ ╚═══════╝ 

One of the best use case for me to use enum's with interface is Predicate filters. It's very elegant way to remedy lack of typness of apache collections (If other libraries mayn't be used).

import java.util.ArrayList;
import java.util.Collection;

import org.apache.commons.collections.CollectionUtils;
import org.apache.commons.collections.Predicate;


public class Test {
    public final static String DEFAULT_COMPONENT = "Default";

    enum FilterTest implements Predicate {
        Active(false) {
            @Override
            boolean eval(Test test) {
                return test.active;
            }
        },
        DefaultComponent(true) {
            @Override
            boolean eval(Test test) {
                return DEFAULT_COMPONENT.equals(test.component);
            }
        }

        ;

        private boolean defaultValue;

        private FilterTest(boolean defautValue) {
            this.defaultValue = defautValue;
        }

        abstract boolean eval(Test test);

        public boolean evaluate(Object o) {
            if (o instanceof Test) {
                return eval((Test)o);
            }
            return defaultValue;
        }

    }

    private boolean active = true;
    private String component = DEFAULT_COMPONENT;

    public static void main(String[] args) {
        Collection<Test> tests = new ArrayList<Test>();
        tests.add(new Test());

        CollectionUtils.filter(tests, FilterTest.Active);
    }
}

import urllib2

manager = urllib2.HTTPPasswordMgrWithDefaultRealm()
manager.add_password(None, 'https://app.streamsend.com/emails', 'login', 'key')
handler = urllib2.HTTPBasicAuthHandler(manager)

director = urllib2.OpenerDirector()
director.add_handler(handler)

req = urllib2.Request('https://app.streamsend.com/emails', headers = {'Accept' : 'application/xml'})

result = director.open(req)
# result.read() will contain the data
# result.info() will contain the HTTP headers

# To get say the content-length header
length = result.info()['Content-Length']

Your cURL call using urllib2 instead. Completely untested.

If you want to get the strings separated by the , you can use

string b = a.Split(',')[0];

For react version 16.6.3, we use super(props) to initialize state element name : this.props.name

constructor(props){
    super(props);        
}
state = {
  name:this.props.name 
    //otherwise not defined
};

Seems like Firebug or whatever Debugger you are using, is not initialized properly. Are you sure Firebug is fully initialized when you try to access the console.log()-method? Check the Console-Tab (if it's set to activated).

Another possibility could be, that you overwrite the console-Object yourself anywhere in the code.

This can be accomplished with a simple VBA function. Excel has support for a Worksheet Change Sub which can be programmed to put a date in a related column every time it fires.

Private Sub Worksheet_Change(ByVal Target As Range)
    If Target.Column = 2 And Target.Offset(0, 3).Value = "" Then
        Target.Offset(0, 3) = Format(Now(), "HH:MM:SS")
    End If
End Sub

A quick explanation. The following "if" statement checks for two things: (1) if it is the second column that changed (Column B), and (2) if the cell 3 columns over (Column E) is currently empty.

If Target.Column = 2 And Target.Offset(0, 3).Value = "" Then

If both conditions are true, then it puts the date into the cell in Column E with the NOW() function.

Target.Offset(0, 3) = Format(Now(), "HH:MM:SS")

Range.Offset

Range.Column

To get the parameterized build params from the current build from your GroovyScript (using Pipeline), all you need to do is: Say you had a variable called VARNAME.

def myVariable = env.VARNAME

Beginning with SQL Server 2012, you can use:

SELECT FORMAT(@date, 'yyyyMM')

You can try below query:

select 
  count(*) 
from 
  all_tab_columns
where 
  table_name = 'your_table'

If you have worked with time/date formatting/parsing in other languages you might have noticed that the other languages use special placeholders for time/date formatting. For eg ruby language uses

%d for day
%Y for year

etc. Golang, instead of using codes such as above, uses date and time format placeholders that look like date and time only. Go uses standard time, which is:

Mon Jan 2 15:04:05 MST 2006  (MST is GMT-0700)
or 
01/02 03:04:05PM '06 -0700

So if you notice Go uses

01 for the day of the month,
02 for the month
03 for hours,
04 for minutes
05 for second
and so on

Therefore for example for parsing 2020-01-29, layout string should be 06-01-02 or 2006-01-02.

You can refer to the full placeholder layout table at this link - https://golangbyexample.com/parse-time-in-golang/

There are 4 versions of the CRT link libraries present in vc\lib:

• libcmt.lib: static CRT link library for a release build (/MT)
• libcmtd.lib: static CRT link library for a debug build (/MTd)
• msvcrt.lib: import library for the release DLL version of the CRT (/MD)
• msvcrtd.lib: import library for the debug DLL version of the CRT (/MDd)

Look at the linker options, Project + Properties, Linker, Command Line. Note how these libraries are not mentioned here. The linker automatically figures out what /M switch was used by the compiler and which .lib should be linked through a #pragma comment directive. Kinda important, you'd get horrible link errors and hard to diagnose runtime errors if there was a mismatch between the /M option and the .lib you link with.

You'll see the error message you quoted when the linker is told both to link to msvcrt.lib and libcmt.lib. Which will happen if you link code that was compiled with /MT with code that was linked with /MD. There can be only one version of the CRT.

/NODEFAULTLIB tells the linker to ignore the #pragma comment directive that was generated from the /MT compiled code. This might work, although a slew of other linker errors is not uncommon. Things like errno, which is a extern int in the static CRT version but macro-ed to a function in the DLL version. Many others like that.

Well, fix this problem the Right Way, find the .obj or .lib file that you are linking that was compiled with the wrong /M option. If you have no clue then you could find it by grepping the .obj/.lib files for "/MT"

Btw: the Windows executables (like version.dll) have their own CRT version to get their job done. It is located in c:\windows\system32, you cannot reliably use it for your own programs, its CRT headers are not available anywhere. The CRT DLL used by your program has a different name (like msvcrt90.dll).

If you need the transition to run infinitely, try the below example:

#box {_x000D_
  position: relative;_x000D_
  width: 100px;_x000D_
  height: 100px;_x000D_
  background-color: gray;_x000D_
  border: 5px solid black;_x000D_
  display: block;_x000D_
}_x000D_
_x000D_
#box:hover {_x000D_
  border-color: red;_x000D_
  animation-name: flash_border;_x000D_
  animation-duration: 2s;_x000D_
  animation-timing-function: linear;_x000D_
  animation-iteration-count: infinite;_x000D_
  -webkit-animation-name: flash_border;_x000D_
  -webkit-animation-duration: 2s;_x000D_
  -webkit-animation-timing-function: linear;_x000D_
  -webkit-animation-iteration-count: infinite;_x000D_
  -moz-animation-name: flash_border;_x000D_
  -moz-animation-duration: 2s;_x000D_
  -moz-animation-timing-function: linear;_x000D_
  -moz-animation-iteration-count: infinite;_x000D_
}_x000D_
_x000D_
@keyframes flash_border {_x000D_
  0% {_x000D_
    border-color: red;_x000D_
  }_x000D_
  50% {_x000D_
    border-color: black;_x000D_
  }_x000D_
  100% {_x000D_
    border-color: red;_x000D_
  }_x000D_
}_x000D_
_x000D_
@-webkit-keyframes flash_border {_x000D_
  0% {_x000D_
    border-color: red;_x000D_
  }_x000D_
  50% {_x000D_
    border-color: black;_x000D_
  }_x000D_
  100% {_x000D_
    border-color: red;_x000D_
  }_x000D_
}_x000D_
_x000D_
@-moz-keyframes flash_border {_x000D_
  0% {_x000D_
    border-color: red;_x000D_
  }_x000D_
  50% {_x000D_
    border-color: black;_x000D_
  }_x000D_
  100% {_x000D_
    border-color: red;_x000D_
  }_x000D_
}

<div id="box">roll over me</div>

To avoid annoying non-checksum lines : CertUtil -v -hashfile "your_file" SHA1 | FIND /V "CertUtil" This will display only line(s) NOT contaning CertUtil

The following query will generate ALTER queries that change the collation for all appropriate columns in all tables to a certain type (utf8_general_ci in my example below).

SELECT concat
        (
            'ALTER TABLE ', 
                t1.TABLE_SCHEMA, 
                '.', 
                t1.table_name, 
                ' MODIFY ', 
                t1.column_name, 
                ' ', 
                t1.data_type, 
                '(' , 
                    CHARACTER_MAXIMUM_LENGTH, 
                ')', 
                ' CHARACTER SET utf8 COLLATE utf8_general_ci;'
        )
from 
    information_schema.columns t1
where 
    t1.TABLE_SCHEMA like 'you_db_name_goes_here' AND
    t1.COLLATION_NAME IS NOT NULL AND
    t1.COLLATION_NAME NOT IN ('utf8_general_ci');

The easiest single-line solution is to use

return new HttpResponseMessage( HttpStatusCode.OK ) {Content =  new StringContent( "Your message here" ) };

For serialized JSON content:

return new HttpResponseMessage( HttpStatusCode.OK ) {Content =  new StringContent( SerializedString, System.Text.Encoding.UTF8, "application/json" ) };

Using the Func as mentioned above works but there are also delegates that do the same task and also define intent within the naming:

public delegate double MyFunction(double x);

public double Diff(double x, MyFunction f)
{
    double h = 0.0000001;

    return (f(x + h) - f(x)) / h;
}

public double MyFunctionMethod(double x)
{
    // Can add more complicated logic here
    return x + 10;
}

public void Client()
{
    double result = Diff(1.234, x => x * 456.1234);
    double secondResult = Diff(2.345, MyFunctionMethod);
}

If you really want DELETE FROM some_table CASCADE; which means "remove all rows from table some_table", you can use TRUNCATE instead of DELETE and CASCADE is always supported. However, if you want to use selective delete with a where clause, TRUNCATE is not good enough.

USE WITH CARE - This will drop all rows of all tables which have a foreign key constraint on some_table and all tables that have constraints on those tables, etc.

Postgres supports CASCADE with TRUNCATE command:

TRUNCATE some_table CASCADE;

Handily this is transactional (i.e. can be rolled back), although it is not fully isolated from other concurrent transactions, and has several other caveats. Read the docs for details.

Later versions of Safari allow you to Disable Cross-Origin Restrictions. Just enable the developer menu from Preferences >> Advanced, and select "Disable Cross-Origin Restrictions" from the develop menu.

If you want local only, then you only need to enable the developer menu, and select "Disable local file restrictions" from the develop menu.

make sure ,use this 404 route wrote on the bottom of the code.

syntax will be like

{
    path: 'page-not-found', 
    component: PagenotfoundComponent
},
{
    path: '**', 
    redirectTo: '/page-not-found'
},

Thank you

The problem I was having is my css media queries and my IF statement in Jquery clashing. They were both set to 700px but one would think it's hit 700px before the other.

To get around this I created a empty Div right at the top of my HTML(outside my main container)

<div id="max-width"></div>

In css I set this div to display none

 #max-width {
        display: none;
    }

In my JS created a function

var hasSwitched = function () {
    var maxWidth = parseInt($('#max-width').css('max-width'), 10);
    return !isNaN(maxWidth);
};

So in my IF statement instead of saying if (hasSwitched<700) perform the following code, I did the following

if (!hasSwitched()) { Your code

}

else{ your code

}

By doing this CSS tells Jquery when it's hit 700px. So css and jquery are both synchronized... rather than having a couple of pixels difference. Do give this a try peeps it shall definitely not disappoint.

To get this same logic working for IE8 I used the Respond.js plugin(which also definitely works) It lets you use media queries for IE8. Only thing that wasn't supported was the viewport width and viewport height... hence my reason to try get my css and JS working together. Hope this helps you guys

There are 3 ways to pass data from Parent to Children

1. Through shareable service : you should store into a service the data you would like to share with the children

2. Through Children Router Resolver if you have to receive different data

   this.data = this.route.snaphsot.data['dataFromResolver'];
   

3. Through Parent Router Resolver if your have to receive the same data from parent

   this.data = this.route.parent.snaphsot.data['dataFromResolver'];
   

Note1: You can read about resolver here. There is also an example of resolver and how to register the resolver into the module and then retrieve data from resolver into the component. The resolver registration is the same on the parent and child.

Note2: You can read about ActivatedRoute here to be able to get data from router

You should use the StringFormat on the Binding. You can use either standard string formats, or custom string formats:

<TextBox Text="{Binding Value, StringFormat=N2}" />
<TextBox Text="{Binding Value, StringFormat={}{0:#,#.00}}" />

Note that the StringFormat only works when the target property is of type string. If you are trying to set something like a Content property (typeof(object)), you will need to use a custom StringFormatConverter (like here), and pass your format string as the ConverterParameter.

Edit for updated question

So, if your ViewModel defines the precision, I'd recommend doing this as a MultiBinding, and creating your own IMultiValueConverter. This is pretty annoying in practice, to go from a simple binding to one that needs to be expanded out to a MultiBinding, but if the precision isn't known at compile time, this is pretty much all you can do. Your IMultiValueConverter would need to take the value, and the precision, and output the formatted string. You'd be able to do this using String.Format.

However, for things like a ContentControl, you can much more easily do this with a Style:

<Style TargetType="{x:Type ContentControl}">
    <Setter Property="ContentStringFormat" 
            Value="{Binding Resolution, StringFormat=N{0}}" />
</Style>

Any control that exposes a ContentStringFormat can be used like this. Unfortunately, TextBox doesn't have anything like that.

In my case i have to change file /etc/mysql/mysql.conf.d/mysqld.cnf change this under [mysqld]

Paste this line on [mysqld] portion

sql_mode = "STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"

you dont need to change your JSON format.

replace:

console.log(data.phones.length);

with:

console.log( Object.keys( data.phones ).length ) ;

Specify the ax argument to matplotlib.pyplot.colorbar(), e.g.

import numpy as np
import matplotlib.pyplot as plt

fig, ax = plt.subplots(2, 2)
for i in range(2):
    for j in range(2):
         data = np.array([[i, j], [i+0.5, j+0.5]])
         im = ax[i, j].imshow(data)
         plt.colorbar(im, ax=ax[i, j])

plt.show()

Getting into the details of the visual style of text-decoration:underline is pretty much futile, so you're going to have to go with some kind of hack the removes text-decoration:underline and replaces it with something else until a magical far-distant future version of CSS gives us more control.

This worked for me:

   a {_x000D_
    background-image: linear-gradient(_x000D_
        180deg, rgba(0,0,0,0),_x000D_
        rgba(0,0,0,0) 81%, _x000D_
        #222222 81.1%,_x000D_
        #222222 85%,_x000D_
        rgba(0,0,0,0) 85.1%,_x000D_
        rgba(0,0,0,0)_x000D_
    );_x000D_
    text-decoration: none;_x000D_
}

<a href="#">Lorem ipsum</a> dolor sit amet, <a href="#">consetetur sadipscing</a> elitr, sed diam nonumy eirmod tempor <a href="#">invidunt ut labore.</a>

• Adjust the % values (81% and 85%) to change how far the line is from the text
• Adjust the difference between the two % values to change the line thickness
• adjust the color values (#222222) to change the underline color
• works with multiple line inline elements
• works with any background

Here's a version with all the proprietary properties for some backwards compatibility:

a {     
    /* This code generated from: http://colorzilla.com/gradient-editor/ */
    background: -moz-linear-gradient(top,  rgba(0,0,0,0) 0%, rgba(0,0,0,0) 81%, rgba(0,0,0,1) 81.1%, rgba(0,0,0,1) 85%, rgba(0,0,0,0) 85.1%, rgba(0,0,0,0) 100%); /* FF3.6+ */
    background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,rgba(0,0,0,0)), color-stop(81%,rgba(0,0,0,0)), color-stop(81.1%,rgba(0,0,0,1)), color-stop(85%,rgba(0,0,0,1)), color-stop(85.1%,rgba(0,0,0,0)), color-stop(100%,rgba(0,0,0,0))); /* Chrome,Safari4+ */
    background: -webkit-linear-gradient(top,  rgba(0,0,0,0) 0%,rgba(0,0,0,0) 81%,rgba(0,0,0,1) 81.1%,rgba(0,0,0,1) 85%,rgba(0,0,0,0) 85.1%,rgba(0,0,0,0) 100%); /* Chrome10+,Safari5.1+ */
    background: -o-linear-gradient(top,  rgba(0,0,0,0) 0%,rgba(0,0,0,0) 81%,rgba(0,0,0,1) 81.1%,rgba(0,0,0,1) 85%,rgba(0,0,0,0) 85.1%,rgba(0,0,0,0) 100%); /* Opera 11.10+ */
    background: -ms-linear-gradient(top,  rgba(0,0,0,0) 0%,rgba(0,0,0,0) 81%,rgba(0,0,0,1) 81.1%,rgba(0,0,0,1) 85%,rgba(0,0,0,0) 85.1%,rgba(0,0,0,0) 100%); /* IE10+ */
    background: linear-gradient(to bottom,  rgba(0,0,0,0) 0%,rgba(0,0,0,0) 81%,rgba(0,0,0,1) 81.1%,rgba(0,0,0,1) 85%,rgba(0,0,0,0) 85.1%,rgba(0,0,0,0) 100%); /* W3C */

    text-decoration: none;
}

Update: SASSY version

I made a scss mixin for this. If you don't use SASS, the regular version above still works great...

@mixin fake-underline($color: #666, $top: 84%, $bottom: 90%) {
    background-image: linear-gradient(
        180deg, rgba(0,0,0,0),
        rgba(0,0,0,0) $top,
        $color $top + 0.1%,
        $color $bottom,
        rgba(0,0,0,0) $bottom + 0.1%,
        rgba(0,0,0,0)
    );
    text-decoration: none;
}

then use it like so:

$blue = #0054a6;
a {
    color: $blue;
    @include fake-underline(lighten($blue,20%));
}
a.thick {
    color: $blue;
    @include fake-underline(lighten($blue,40%), 86%, 99%);
}

Update 2: Descenders Tip

If you have a solid background color, try adding a thin text-stroke or text-shadow in the same color as your background to make the descenders look nice.

Credit

This is simplified version of the technique I originally found at https://eager.io/app/smartunderline, but the article has since been taken down.

wait() must surround with synchronized,when the thread entry the synchronized block or method, it means get the lock,so it not block,invoke wait mean release the lock,so it exit the synchronized then block, Thread.sleep() causes the current thread to suspend execution for a specified period.The thread does not lose ownership of any monitors

It sounds like something like the below will suit your needs:

With Sheets("Sheet1")
    .Rows( X & ":" & .Rows.Count).Delete
End With

Where X is a variable that = the row number ( 415 )

After reading through various solutions, I'd like to add that the reason those solutions work is to rely on the concept of scope chain. It's the way JavaScript resolve a variable during execution.

• Each function definition forms a scope consisting of all the local variables declared by var and its arguments.
• If we have inner function defined inside another (outer) function, this forms a chain, and will be used during execution
• When a function gets executed, the runtime evaluates variables by searching the scope chain. If a variable can be found in a certain point of the chain it will stop searching and use it, otherwise it continues until the global scope reached which belongs to window.

In the initial code:

funcs = {};
for (var i = 0; i < 3; i++) {         
  funcs[i] = function inner() {        // function inner's scope contains nothing
    console.log("My value: " + i);    
  };
}
console.log(window.i)                  // test value 'i', print 3

When funcs gets executed, the scope chain will be function inner -> global. Since the variable i cannot be found in function inner (neither declared using var nor passed as arguments), it continues to search, until the value of i is eventually found in the global scope which is window.i.

By wrapping it in an outer function either explicitly define a helper function like harto did or use an anonymous function like Bjorn did:

funcs = {};
function outer(i) {              // function outer's scope contains 'i'
  return function inner() {      // function inner, closure created
   console.log("My value: " + i);
  };
}
for (var i = 0; i < 3; i++) {
  funcs[i] = outer(i);
}
console.log(window.i)          // print 3 still

When funcs gets executed, now the scope chain will be function inner -> function outer. This time i can be found in the outer function's scope which is executed 3 times in the for loop, each time has value i bound correctly. It won't use the value of window.i when inner executed.

More detail can be found here
It includes the common mistake in creating closure in the loop as what we have here, as well as why we need closure and the performance consideration.

EDIT: This is bad advice. Use "o", as above. "s" does the wrong thing.

I always use this:

dateTime.ToUniversalTime().ToString("s");

This is correct if your schema looks like this:

<xs:element name="startdate" type="xs:dateTime"/>

Which would result in:

<startdate>2002-05-30T09:00:00</startdate>

You can get more information here: http://www.w3schools.com/xml/schema_dtypes_date.asp

There's no reason to use setRawInputType(), just use setInputType(). However, you have to combine the class and flags with the OR operator:

edit.setInputType(InputType.TYPE_CLASS_NUMBER | InputType.TYPE_NUMBER_FLAG_DECIMAL | InputType.TYPE_NUMBER_FLAG_SIGNED);

If you have a need to copy the exact same timestamp data, change the data type in the destination table from timestamp to binary(8) -- i used varbinary(8) and it worked fine.

This obviously breaks any timestamp functionality in the destination table, so make sure you're ok with that first.

Use strlen to get the length of a null-terminated string.

sizeof returns the length of the array not the string. If it's a pointer (char *s), not an array (char s[]), it won't work, since it will return the size of the pointer (usually 4 bytes on 32-bit systems). I believe an array will be passed or returned as a pointer, so you'd lose the ability to use sizeof to check the size of the array.

So, only if the string spans the entire array (e.g. char s[] = "stuff"), would using sizeof for a statically defined array return what you want (and be faster as it wouldn't need to loop through to find the null-terminator) (if the last character is a null-terminator, you will need to subtract 1). If it doesn't span the entire array, it won't return what you want.

An alternative to all this is actually storing the size of the string.

Well, for one thing your epression can be simplified:

$("#pDetails").attr("style")

since there should only be one element for any given ID and the ID selector will be much faster than the attribute id selector you're using.

If you just want to return the display value or something, use css():

$("#pDetails").css("display")

If you want to search for elements that have display none, that's a lot harder to do reliably. This is a rough example that won't be 100%:

$("[style*='display: none']")

but if you just want to find things that are hidden, use this:

$(":hidden")

You want to use pyplot.grid:

x = numpy.arange(0, 1, 0.05)
y = numpy.power(x, 2)

fig = plt.figure()
ax = fig.gca()
ax.set_xticks(numpy.arange(0, 1, 0.1))
ax.set_yticks(numpy.arange(0, 1., 0.1))
plt.scatter(x, y)
plt.grid()
plt.show()

ax.xaxis.grid and ax.yaxis.grid can control grid lines properties.

Since there is discussion about performance I figured I'd add in a comparison that included StringBuilder. It is in fact faster than the concat and, naturally the String.format option.

To make this a sort of apples to apples comparison I instantiate a new StringBuilder in the loop rather than outside (this is actually faster than doing just one instantiation most likely due to the overhead of re-allocating space for the looping append at the end of one builder).

    String formatString = "Hi %s; Hi to you %s";

    long start = System.currentTimeMillis();
    for (int i = 0; i < 1000000; i++) {
        String s = String.format(formatString, i, +i * 2);
    }

    long end = System.currentTimeMillis();
    log.info("Format = " + ((end - start)) + " millisecond");

    start = System.currentTimeMillis();

    for (int i = 0; i < 1000000; i++) {
        String s = "Hi " + i + "; Hi to you " + i * 2;
    }

    end = System.currentTimeMillis();

    log.info("Concatenation = " + ((end - start)) + " millisecond");

    start = System.currentTimeMillis();

    for (int i = 0; i < 1000000; i++) {
        StringBuilder bldString = new StringBuilder("Hi ");
        bldString.append(i).append("; Hi to you ").append(i * 2);
    }

    end = System.currentTimeMillis();

    log.info("String Builder = " + ((end - start)) + " millisecond");

• 2012-01-11 16:30:46,058 INFO [TestMain] - Format = 1416 millisecond
• 2012-01-11 16:30:46,190 INFO [TestMain] - Concatenation = 134 millisecond
• 2012-01-11 16:30:46,313 INFO [TestMain] - String Builder = 117 millisecond

In the answer that uses the registry, I found that on Windows 2008 R2 SP1, you need to drop the Background out of the path. Further, since the chere and xhere are not part of cygwin64, here is a solution that works for both, combining the registry and the Send To solutions. Replace 'E:\cygwin64' with your install location:

Windows Registry Editor Version 5.00

[HKEY_CLASSES_ROOT\Directory\shell\cygwin_bash]
@="Open Cygwin Here"

[HKEY_CLASSES_ROOT\Directory\shell\cygwin_bash\command]
@="E:\\cygwin64\\bin\\mintty.exe -i /Cygwin-Terminal.ico --exec /bin/bash.exe --login -c \"cd '%1' ; exec bash -rcfile ~/.bashrc\""