Just use the sys.getsizeof function defined in the sys
module.
sys.getsizeof(object[, default])
:Return the size of an object in bytes. The object can be any type of object. All built-in objects will return correct results, but this does not have to hold true for third-party extensions as it is implementation specific.
Only the memory consumption directly attributed to the object is accounted for, not the memory consumption of objects it refers to.
The
default
argument allows to define a value which will be returned if the object type does not provide means to retrieve the size and would cause aTypeError
.
getsizeof
calls the object’s__sizeof__
method and adds an additional garbage collector overhead if the object is managed by the garbage collector.See recursive sizeof recipe for an example of using
getsizeof()
recursively to find the size of containers and all their contents.
Usage example, in python 3.0:
>>> import sys
>>> x = 2
>>> sys.getsizeof(x)
24
>>> sys.getsizeof(sys.getsizeof)
32
>>> sys.getsizeof('this')
38
>>> sys.getsizeof('this also')
48
If you are in python < 2.6 and don't have sys.getsizeof
you can use this extensive module instead. Never used it though.
This can be due to byte alignment and padding so that the structure comes out to an even number of bytes (or words) on your platform. For example in C on Linux, the following 3 structures:
#include "stdio.h"
struct oneInt {
int x;
};
struct twoInts {
int x;
int y;
};
struct someBits {
int x:2;
int y:6;
};
int main (int argc, char** argv) {
printf("oneInt=%zu\n",sizeof(struct oneInt));
printf("twoInts=%zu\n",sizeof(struct twoInts));
printf("someBits=%zu\n",sizeof(struct someBits));
return 0;
}
Have members who's sizes (in bytes) are 4 bytes (32 bits), 8 bytes (2x 32 bits) and 1 byte (2+6 bits) respectively. The above program (on Linux using gcc) prints the sizes as 4, 8, and 4 - where the last structure is padded so that it is a single word (4 x 8 bit bytes on my 32bit platform).
oneInt=4
twoInts=8
someBits=4
Size of a pointer should be 8 byte on any 64-bit C/C++ compiler, but not necessarily size of int.
This is supposed to print the ASCII value of the character, as %d
is the escape sequence for an integer. So the value given as argument of printf
is taken as integer when printed.
char ch = 'a';
printf("%d", ch);
Same holds for printf("%d", '\0');
, where the NULL character is interpreted as the 0 integer.
Finally, sizeof('\n')
is 4 because in C, this notation for characters stands for the corresponding ASCII integer. So '\n' is the same as 10 as an integer.
It all depends on the interpretation you give to the bytes.
No, you can't use sizeof(ptr)
to find the size of array ptr
is pointing to.
Though allocating extra memory(more than the size of array) will be helpful if you want to store the length in extra space.
An enum is nearly an integer. To simplify a lot
enum yourenum { a, b, c };
is almost like
#define a 0
#define b 1
#define c 2
Of course, it is not really true. I'm trying to explain that enum are some kind of coding...
Try an LL
suffix on the number, the compiler may be casting it to an intermediate type as part of the parse. See http://gcc.gnu.org/onlinedocs/gcc/Long-Long.html
long long int i2 = 0x0000444400004444LL;
Additionally, the the compiler is discarding the leading zeros, so 0x000044440000
is becoming 0x44440000
, which is a perfectly acceptable 32-bit integer (which is why you aren't seeing any warnings prior to f2
).
size_t is 64 bit normally on 64 bit machine
While sizeof
works for this specific type of string:
char str[] = "content";
int charcount = sizeof str - 1; // -1 to exclude terminating '\0'
It does not work if str
is pointer (sizeof
returns size of pointer, usually 4 or 8) or array with specified length (sizeof
will return the byte count matching specified length, which for char type are same).
Just use strlen()
.
They can be different on word-addressable machines (e.g., Cray PVP systems).
Most computers today are byte-addressable machines, where each address refers to a byte of memory. There, all data pointers are usually the same size, namely the size of a machine address.
On word-adressable machines, each machine address refers instead to a word larger than a byte. On these, a (char *) or (void *) pointer to a byte of memory has to contain both a word address plus a byte offset within the addresed word.
http://docs.cray.com/books/004-2179-001/html-004-2179-001/rvc5mrwh.html
It seems that if you know the type of elements in the array you can also use that to your advantage with sizeof
.
int numList[] = { 0, 1, 2, 3, 4 };
cout << sizeof(numList) / sizeof(int);
// => 5
Just another exception to the already posted list. On 32-bit platforms, pointers can take 6, not 4, bytes:
#include <stdio.h>
#include <stdlib.h>
int main() {
char far* ptr; // note that this is a far pointer
printf( "%d\n", sizeof( ptr));
return EXIT_SUCCESS;
}
If you compile this program with Open Watcom and run it, you'll get 6, because far pointers that it supports consist of 32-bit offset and 16-bit segment values
Sometimes I use this to flag really big objects that might be going to the client from the server. It doesn't represent the in memory footprint. It just gets you approximately what it'd cost to send it, or store it.
Also note, it's slow, dev only. But for getting an ballpark answer with one line of code it's been useful for me.
roughObjSize = JSON.stringify(bigObject).length;
The exact value is sizeof(a).
You might also take a risk and assume that it is in this case no less than 2 and no greater than 16.
Actually, there is no proper way to count the elements in a dynamic integer array. However, the sizeof command works properly in Linux, but it does not work properly in Windows. From a programmer's point of view, it is not recommended to use sizeof to take the number of elements in a dynamic array. We should keep track of the number of elements when making the array.
Another solution if you would like to avoid a curl call and have the browser redirect like normal and mimic a POST call:
save the post and do a temporary redirect:
function post_redirect($url) {
$_SESSION['post_data'] = $_POST;
header('Location: ' . $url);
}
Then always check for the session variable post_data
:
if (isset($_SESSION['post_data'])) {
$_POST = $_SESSION['post_data'];
$_SERVER['REQUEST_METHOD'] = 'POST';
unset($_SESSION['post_data']);
}
There will be some missing components such as the apache_request_headers() will not show a POST Content header, etc..
I've found an interesting way to solve this using only jQuery:
$("#element1").before($("#element2"));
or
$("#element1").after($("#element2"));
:)
Just declare it outside class definition.
If your namespace's name is X, you will be able to access the enum's values by X.card_suit
If you have not defined a namespace for this enum, just call them by card_suit.Clubs etc.
There is a list option in Data validation. If this is combined with a VLOOKUP formula you would be able to convert the selected value into a number.
The steps in Excel 2010 are:
In a cell enter a formula like this
=VLOOKUP(A2,$D$3:$E$5,2,FALSE)
which will return the matching value from the second part of your list.
Alternatively, Form controls can be placed on a worksheet. They can be linked to a range and return the position number of the selected value to a specific cell.
The steps in Excel 2010 are:
<script type="text/javascript">
function SelectAnimal(){
//Set selected option of Animals based on AnimalToFind value...
var animalTofind = document.getElementById('AnimalToFind');
var selection = document.getElementById('Animals');
// select element
for(var i=0;i<selection.options.length;i++){
if (selection.options[i].innerHTML == animalTofind.value) {
selection.selectedIndex = i;
break;
}
}
}
</script>
setting the selectedIndex property of the select tag will choose the correct item. it is a good idea of instead of comparing the two values (options innerHTML && animal value) you can use the indexOf() method or regular expression to select the correct option despite casing or presense of spaces
selection.options[i].innerHTML.indexOf(animalTofind.value) != -1;
or using .match(/regular expression/)
For the point 2.
I see that no one has suggested to use document.elementFromPoint(x,y)
, to me it is the fastest way to test if an element is nested or hidden by another. You can pass the offsets of the targetted element to the function.
Here's PPK test page on elementFromPoint.
From MDN's documentation:
The
elementFromPoint()
method—available on both the Document and ShadowRoot objects—returns the topmost Element at the specified coordinates (relative to the viewport).
Setting up a simple reverse proxy on the server, will allow the browser to use relative paths for the Ajax requests, while the server would be acting as a proxy to any remote location.
If using mod_proxy in Apache, the fundamental configuration directive to set up a reverse proxy is the ProxyPass
. It is typically used as follows:
ProxyPass /ajax/ http://other-domain.com/ajax/
In this case, the browser would be able to request /ajax/web_service.xml
as a relative URL, but the server would serve this by acting as a proxy to http://other-domain.com/ajax/web_service.xml
.
One interesting feature of the this method is that the reverse proxy can easily distribute requests towards multiple back-ends, thus acting as a load balancer.
The only way to access classes in the default package is from another class in the default package. In that case, don't bother to import
it, just refer to it directly.
In the future the format might need to be changed which could be a small head ache having date.dateFromISO8601 calls everywhere in an app. Use a class and protocol to wrap the implementation, changing the date time format call in one place will be simpler. Use RFC3339 if possible, its a more complete representation. DateFormatProtocol and DateFormat is great for dependency injection.
class AppDelegate: UIResponder, UIApplicationDelegate {
internal static let rfc3339DateFormat = "yyyy-MM-dd'T'HH:mm:ssZZZZZ"
internal static let localeEnUsPosix = "en_US_POSIX"
}
import Foundation
protocol DateFormatProtocol {
func format(date: NSDate) -> String
func parse(date: String) -> NSDate?
}
import Foundation
class DateFormat: DateFormatProtocol {
func format(date: NSDate) -> String {
return date.rfc3339
}
func parse(date: String) -> NSDate? {
return date.rfc3339
}
}
extension NSDate {
struct Formatter {
static let rfc3339: NSDateFormatter = {
let formatter = NSDateFormatter()
formatter.calendar = NSCalendar(calendarIdentifier: NSCalendarIdentifierISO8601)
formatter.locale = NSLocale(localeIdentifier: AppDelegate.localeEnUsPosix)
formatter.timeZone = NSTimeZone(forSecondsFromGMT: 0)
formatter.dateFormat = rfc3339DateFormat
return formatter
}()
}
var rfc3339: String { return Formatter.rfc3339.stringFromDate(self) }
}
extension String {
var rfc3339: NSDate? {
return NSDate.Formatter.rfc3339.dateFromString(self)
}
}
class DependencyService: DependencyServiceProtocol {
private var dateFormat: DateFormatProtocol?
func setDateFormat(dateFormat: DateFormatProtocol) {
self.dateFormat = dateFormat
}
func getDateFormat() -> DateFormatProtocol {
if let dateFormatObject = dateFormat {
return dateFormatObject
} else {
let dateFormatObject = DateFormat()
dateFormat = dateFormatObject
return dateFormatObject
}
}
}
@Jacob already showed you how to use the Gaussian filter in Matlab, so I won't repeat that.
I would choose filter size to be about 3*sigma in each direction (round to odd integer). Thus, the filter decays to nearly zero at the edges, and you won't get discontinuities in the filtered image.
The choice of sigma depends a lot on what you want to do. Gaussian smoothing is low-pass filtering, which means that it suppresses high-frequency detail (noise, but also edges), while preserving the low-frequency parts of the image (i.e. those that don't vary so much). In other words, the filter blurs everything that is smaller than the filter.
If you're looking to suppress noise in an image in order to enhance the detection of small features, for example, I suggest to choose a sigma that makes the Gaussian just slightly smaller than the feature.
Unfortunately, I don't believe there really is a better way of doing this due to the nature of Java's handling of primitive types, boxing, arrays and generics. In particular:
List<T>.toArray
won't work because there's no conversion from Integer
to int
int
as a type argument for generics, so it would have to be an int
-specific method (or one which used reflection to do nasty trickery).I believe there are libraries which have autogenerated versions of this kind of method for all the primitive types (i.e. there's a template which is copied for each type). It's ugly, but that's the way it is I'm afraid :(
Even though the Arrays
class came out before generics arrived in Java, it would still have to include all the horrible overloads if it were introduced today (assuming you want to use primitive arrays).
simple is the best and works in every version.
if a>10:
value="b"
else:
value="c"
$monthname = date("F", strtotime($month));
F
means full month name
++[[]][+[]] => 1 // [+[]] = [0], ++0 = 1
[+[]] => [0]
Then we have a string concatenation
1+[0].toString() = 10
Check against any long running queries in your database.
Increasing your pool size will only make your webapp live a little longer (and probably get a lot slower)
You can use sql server profiler and filter on duration / reads to see which querys need optimization.
I also see you're probably keeping a global connection?
blnMainConnectionIsCreatedLocal
Let .net do the pooling for you and open / close your connection with a using statement.
Suggestions:
Always open and close a connection like this, so .net can manage your connections and you won't run out of connections:
using (SqlConnection conn = new SqlConnection(connectionString))
{
conn.Open();
// do some stuff
} //conn disposed
As I mentioned, check your query with sql server profiler and see if you can optimize it. Having a slow query with many requests in a web app can give these timeouts too.
Here is simple way using Top object.
eg: If absolute element size is 60px.
.absolute-element {
position:absolute;
height:60px;
top: calc(50% - 60px);
}
I had this problem - I eventually worked out that the reason was that I'd included \
characters in the string. If you have any of these, "escape" them with \\
and it should work fine.
An IP camera can be accessed in opencv by providing the streaming URL of the camera in the constructor of cv2.VideoCapture
.
Usually, RTSP or HTTP protocol is used by the camera to stream video. An example of IP camera streaming URL is as follows:
rtsp://192.168.1.64/1
It can be opened with OpenCV like this:
capture = cv2.VideoCapture('rtsp://192.168.1.64/1')
Most of the IP cameras have a username and password to access the video. In such case, the credentials have to be provided in the streaming URL as follows:
capture = cv2.VideoCapture('rtsp://username:[email protected]/1')
Try this, which I think makes it clear. the underlying array is changed but our slice is not, print
just prints len()
chars, by another slice to the cap()
, you can see the changed array:
func main() {
for i := 0; i < 7; i++ {
a[i] = i
}
Test(a)
fmt.Println(a) // prints [0..6]
fmt.Println(a[:cap(a)] // prints [0..6,100]
}
You could use jQuery and an Ajax call to post the specific update back to your server with Javascript.
It would look something like this:
function updatePostID(val, comment)
{
var args = {};
args.PostID = val;
args.Comment = comment;
$.ajax({
type: "POST",
url: controllerActionMethodUrlHere,
contentType: "application/json; charset=utf-8",
data: args,
dataType: "json",
success: function(msg)
{
// Something afterwards here
}
});
}
Go to File > Settings > Builds,Execution,Deployment > Build Tools > Gradle >Gradle home path
Now, set Use default gradle wrapper and edit Project\gradle\wrapper\gradle-wrapper.properties files field distributionUrl like this
distributionUrl=https://services.gradle.org/distributions/gradle-2.10-all.zip
Another use of BST over Heap; because of an important difference :
Use of BST over a Heap: Now, Lets say we use a data structure to store landing time of flights. We cannot schedule a flight to land if difference in landing times is less than 'd'. And assume many flights have been scheduled to land in a data structure(BST or Heap).
Now, we want to schedule another Flight which will land at t. Hence, we need to calculate difference of t with its successor and predecessor (should be >d). Thus, we will need a BST for this, which does it fast i.e. in O(logn) if balanced.
EDITed:
Sorting BST takes O(n) time to print elements in sorted order (Inorder traversal), while Heap can do it in O(n logn) time. Heap extracts min element and re-heapifies the array, which makes it do the sorting in O(n logn) time.
Try using ZoomView
for zooming any other view.
http://code.google.com/p/android-zoom-view/ it's easy, free and fun to use!
Do you realy want to return null ? Something you can do, is maybe initialise savedkey with 0 value and return 0 as a null value. It can be more simple.
<script>
is HTML 5.
<script type='text/javascript'>
is HTML 4.x (and XHTML 1.x).
<script language="javascript">
is HTML 3.2.
Is it different for different webservers?
No.
when I did an offline javascript test, i realised that i need the
<script type = 'text/javascript'>
tag.
That isn't the case. Something else must have been wrong with your test case.
For anyone looking for how to do this in macOS Catalina or above (10.15+ incl. Big Sur 11.0) which has deprecated bash in favour of zsh, here is my .zshrc file:
parse_git_branch() {
git branch 2> /dev/null | sed -n -e 's/^\* \(.*\)/[\1]/p'
}
COLOR_DEF='%f'
COLOR_USR='%F{243}'
COLOR_DIR='%F{197}'
COLOR_GIT='%F{39}'
NEWLINE=$'%{\n%}'
setopt PROMPT_SUBST
export PROMPT='${COLOR_USR}%n@%M ${COLOR_DIR}%d ${COLOR_GIT}$(parse_git_branch)${COLOR_DEF}${NEWLINE}%% '
If you don't like the colours I have used, replace the 243/197/39 values with the colour codes as defined here: https://misc.flogisoft.com/bash/tip_colors_and_formatting
#created a sorting function to sort by length of elements of list
def sort_len(a):
num = len(a)
d = {}
i = 0
while i<num:
d[i] = len(a[i])
i += 1
b = list(d.values())
b.sort()
c = []
for i in b:
for j in range(num):
if j in list(d.keys()):
if d[j] == i:
c.append(a[j])
d.pop(j)
return c
Here's what I would do:
for file in *.[Jj][Pp][Gg] ;do
echo mv -vi \"$file\" `jhead $file|
grep Date|
cut -b 16-|
sed -e 's/:/-/g' -e 's/ /_/g' -e 's/$/.jpg/g'` ;
done
Then if that looks ok, add | sh
to the end. So:
for file in *.[Jj][Pp][Gg] ;do
echo mv -vi \"$file\" `jhead $file|
grep Date|
cut -b 16-|
sed -e 's/:/-/g' -e 's/ /_/g' -e 's/$/.jpg/g'` ;
done | sh
Here is a sample to find if there are match elements in another list
List<int> nums1 = new List<int> { 2, 4, 6, 8, 10 };
List<int> nums2 = new List<int> { 1, 3, 6, 9, 12};
if (nums1.Any(x => nums2.Any(y => y == x)))
{
Console.WriteLine("There are equal elements");
}
else
{
Console.WriteLine("No Match Found!");
}
just as a .crt file is in .pem format, a .key file is also stored in .pem format. Assuming that the cert is the only thing in the .crt file (there may be root certs in there), you can just change the name to .pem. The same goes for a .key file. Which means of course that you can rename the .pem file to .key.
Which makes gtrig's answer the correct one. I just thought I'd explain why.
Old ionic cli (4.2) was causing issue in my case, update to 5 solve the problem
Set is an interface and some of its implementation classes are HashSet, TreeSet and LinkedHashSet. It uses HashMap under the hood to store values. Because HashMap does not preserve the order, it is not possible to get value by index.
You now must be thinking how Set is using HashMap since HashMap stores a key, value pair but the Set does not. valid question. when you add an element in Set, internally, it maintains a HashMap where the key is the element you want to enter in Set and the value is the dummy constant. Below is an internal implementation of add function. Hence, all the keys in the HashMap will have the same constant value.
// Dummy value to associate with an Object in the backing Map
private static final Object PRESENT = new Object();
public boolean add(E e) {
return map.put(e, PRESENT)==null;
}
I think something like this would work, upgrading the @Marc code:
//view-all parameter does NOT exist
$params = $_GET;
if(!isset($_GET['view-all'])){
//Adding view-all parameter
$params['view-all'] = 'Yes';
}
else{
//view-all parameter does exist!
$params['view-all'] = ($params['view-all'] == 'Yes' ? 'No' : 'Yes');
}
$new_url = $_SERVER['PHP_SELF'].'?'.http_build_query($params);
try this:
Sub test()
With Application.WorksheetFunction
Cells(.CountA(Columns("A:A")) + 1, 1).Select
End With
End Sub
Hope this works for you.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Security;
using System.DirectoryServices.AccountManagement;
public struct Credentials
{
public string Username;
public string Password;
}
public class Domain_Authentication
{
public Credentials Credentials;
public string Domain;
public Domain_Authentication(string Username, string Password, string SDomain)
{
Credentials.Username = Username;
Credentials.Password = Password;
Domain = SDomain;
}
public bool IsValid()
{
using (PrincipalContext pc = new PrincipalContext(ContextType.Domain, Domain))
{
// validate the credentials
return pc.ValidateCredentials(Credentials.Username, Credentials.Password);
}
}
}
You may have Security-Enhanced Linux running, so add rule for that. I had permission 13 errors, even though permissions were set and user existed..
chcon -Rt httpd_sys_content_t /username/test/static
I tested this in android 4.0.3, only:
getWindow().getDecorView().getRootView()
give the same view what we get from
anyview.getRootView();
com.android.internal.policy.impl.PhoneWindow$DecorView@#########
and
getWindow().getDecorView().findViewById(android.R.id.content)
giving child of its
android.widget.FrameLayout@#######
Please confirm.
Sub Results2()
Dim rCell As Range
Dim shSource As Worksheet
Dim shDest As Worksheet
Dim lCnt As Long
Set shSource = ThisWorkbook.Sheets("Sheet1")
Set shDest = ThisWorkbook.Sheets("Sheet2")
For Each rCell In shSource.Range("A1", shSource.Cells(shSource.Rows.Count, 1).End(xlUp)).Cells
lCnt = lCnt + 1
shDest.Range("A4").Offset(0, lCnt * 4).Formula = "=" & rCell.Address(False, False, , True) & "+" & rCell.Offset(0, 1).Address(False, False, , True)
Next rCell
End Sub
This loops through column A of sheet1 and creates a formula in sheet2 for every cell. To find the last cell in Sheet1, I start at the bottom (shSource.Rows.Count) and .End(xlUp) to get the last cell in the column that's not blank.
To create the elements of the formula, I use the Address property of the cell on Sheet. I'm using three of the arguments to Address. The first two are RowAbsolute and ColumnAbsolute, both set to false. I don't care about the third argument, but I set the fourth argument (External) to True so that it includes the sheet name.
I prefer to go from Source to Destination rather than the other way. But that's just a personal preference. If you want to work from the destination,
Sub Results3()
Dim i As Long, lCnt As Long
Dim sh As Worksheet
lCnt = Application.WorksheetFunction.CountA(ThisWorkbook.Sheets("Sheet1").Columns(1))
Set sh = ThisWorkbook.Sheets("Sheet2")
Const sSOURCE As String = "Sheet1!"
For i = 1 To lCnt
sh.Range("A1").Offset(0, 4 * (i - 1)).Formula = "=" & sSOURCE & "A" & i & " + " & sSOURCE & "B" & i
Next i
End Sub
In the fragment where you would like to handle your back button you should attach stuff to your view in the oncreateview
@Override
public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) {
View v = inflater.inflate(R.layout.second_fragment, container, false);
v.setOnKeyListener(pressed);
return v;
}
@Override
public boolean onKey(View v, int keyCode, KeyEvent event) {
// TODO Auto-generated method stub
if( keyCode == KeyEvent.KEYCODE_BACK ){
// back to previous fragment by tag
myfragmentclass fragment = (myfragmentclass) getActivity().getSupportFragmentManager().findFragmentByTag(TAG);
if(fragment != null){
(getActivity().getSupportFragmentManager().beginTransaction()).replace(R.id.cf_g1_mainframe_fm, fragment).commit();
}
return true;
}
return false;
}
};
In golang's wiki it show some tricks for slice, including delete an element from slice.
Link: enter link description here
For example a is the slice which you want to delete the number i element.
a = append(a[:i], a[i+1:]...)
OR
a = a[:i+copy(a[i:], a[i+1:])]
if you are in the windows7 platform maybe you should change the NODE_PATH like this:
%AppData%\npm\node_modules
If you want to redirect, just use window.location
. Like so:
window.location = "http://www.redirectedsite.com"
I'm pretty sure C-style casting syntax works in Objective C, so try that, too:
int myInt = (int) myFloat;
It might silence a compiler warning, at least.
Use my code .. I am able to play youtube video using this code ... you just need to provide youtube video id in the "videoId" variable ....
String videoId = "Fee5vbFLYM4";
Intent intent = new Intent(Intent.ACTION_VIEW, Uri.parse("vnd.youtube:"+videoId));
intent.putExtra("VIDEO_ID", videoId);
startActivity(intent);
I got the same problem after upgrading java from 1.8.0_202 to 1.8.0_211
Problem:
Here are directories where new version of 1.8.0_211 of Java installed:
Directory of c:\Program Files\Java\jre1.8.0_211\bin Directory of c:\Program Files (x86)\Common Files\Oracle\Java\javapath
So one is located in 32 bit and second is in 64 bit Program files folder. The one that is specified in the PATH is 32 bit version (c:\Program Files (x86)\Common Files\Oracle\Java\javapath), even though it was 64 bit version of the Java that was installed.
Solution:
Change system environments variable PATH from c:\Program Files (x86)\Common Files\Oracle\Java\javapath to c:\Program Files\Java\jre1.8.0_211\bin
Couple of ways using count
or sum
In [338]: df
Out[338]:
col1 education
0 a 9th
1 b 9th
2 c 8th
In [335]: df.loc[df.education == '9th', 'education'].count()
Out[335]: 2
In [336]: (df.education == '9th').sum()
Out[336]: 2
In [337]: df.query('education == "9th"').education.count()
Out[337]: 2
If you have control over the request, you could set the content type to binary/octet-stream. This allows to query for parameters without consuming the input stream.
However, this might be specific to some application servers. I only tested tomcat, jetty seems to behave the same way according to https://stackoverflow.com/a/11434646/957103.
For those interested, this is code for creating SHA-256 hash using sjcl
:
import sjcl from 'sjcl'
const myString = 'Hello'
const myBitArray = sjcl.hash.sha256.hash(myString)
const myHash = sjcl.codec.hex.fromBits(myBitArray)
Be aware that there are some issues where System#nanoTime()
cannot be reliably used on multi-core CPU's to record elapsed time ... each core has maintains its own TSC (Time Stamp Counter): this counter is used to obtain the nano time (really it is the number of ticks since the CPU booted).
Hence, unless the OS does some TSC time warping to keep the cores in sync, then if a thread gets scheduled on one core when the initial time reading is taken, then switched to a different core, the relative time can sporadically appear to jump backwards and forwards.
I observed this some time ago on AMD/Solaris where elapsed times between two timing points were sometimes coming back as either negative values or unexpectedly large positive numbers. There was a Solaris kernel patch and a BIOS setting required to force the AMD PowerNow! off, which appeared to solved it.
Also, there is (AFAIK) a so-far unfixed bug when using java System#nanoTime()
in a VirtualBox environment; causing all sorts of bizarre intermittent threading problems for us as much of the java.util.concurrency
package relies on nano time.
See also:
Is System.nanoTime() completely useless? http://vbox.innotek.de/pipermail/vbox-trac/2010-January/135631.html
foreach($array as $elementKey => $element) {
foreach($element as $valueKey => $value) {
if($valueKey == 'id' && $value == 'searched_value'){
//delete this particular object from the $array
unset($array[$elementKey]);
}
}
}
On Windows: if you had to mount two directories E:\data\dev & E:\data\dev2
Use:
docker run -v E:\data\dev:c:/downloads -v E:\data\dev2 c:/downloads2 -i --publish 1111:80 -P SomeBuiltContainerName:SomeLabel
An alternative General Plan, which I'm only adding as an independent Answer because the blasted "comment on an answer" won't take newlines without posting the entire edit, even though it isn't finished yet.
UPDATE table A
JOIN table B ON {join fields}
JOIN table C ON {join fields}
JOIN {as many tables as you need}
SET A.column = {expression}
Example:
UPDATE person P
JOIN address A ON P.home_address_id = A.id
JOIN city C ON A.city_id = C.id
SET P.home_zip = C.zipcode;
#multiple-background{_x000D_
box-sizing: border-box;_x000D_
width: 123px;_x000D_
height: 30px;_x000D_
font-size: 12pt;_x000D_
border-radius: 7px; _x000D_
background: url("https://cdn0.iconfinder.com/data/icons/woocons1/Checkbox%20Full.png"), linear-gradient(to bottom, #4ac425, #4ac425);_x000D_
background-repeat: no-repeat, repeat;_x000D_
background-position: 5px center, 0px 0px;_x000D_
background-size: 18px 18px, 100% 100%;_x000D_
color: white; _x000D_
border: 1px solid #e4f6df;_x000D_
box-shadow: .25px .25px .5px .5px black;_x000D_
padding: 3px 10px 0px 5px;_x000D_
text-align: right;_x000D_
}
_x000D_
<div id="multiple-background"> Completed </div>
_x000D_
The solution is simple.
Open up the AVD Manager. Edit your AVD.
Down in the hardware section, there are some properties listed with "New..." and "Delete" to the right of it.
Press New. Select Data Partition size. Set to "512MB" (the MB is required). And you're done. if you still get issues, increase your system and cache partitions too using the same method.
It's all documented right here: http://developer.android.com/guide/developing/devices/managing-avds.html
You could use an existing hash algorithm that produces something short, like MD5 (128 bits) or SHA1 (160). Then you can shorten that further by XORing sections of the digest with other sections. This will increase the chance of collisions, but not as bad as simply truncating the digest.
Also, you could include the length of the original data as part of the result to make it more unique. For example, XORing the first half of an MD5 digest with the second half would result in 64 bits. Add 32 bits for the length of the data (or lower if you know that length will always fit into fewer bits). That would result in a 96-bit (12-byte) result that you could then turn into a 24-character hex string. Alternately, you could use base 64 encoding to make it even shorter.
To extract the real part of a complex-valued expression z
, use the notation as __real__ z
.
Similarly, use __imag__
attribute on the z
to extract the imaginary part.
For example;
__complex__ float z;
float r;
float i;
r = __real__ z;
i = __imag__ z;
r is the real part of the complex number "z" i is the imaginary part of the complex number "z"
Took DonkeyKong's example.
The issue is I needed to use a declared variable. This allows for stating your left and right-hand side of what you need to compare. This is for supporting an SSRS report where different fields must be linked based on the selection by the user.
The initial case sets the field choice based on the selection and then I can set the field I need to match on for the join.
A second case statement could be added for the right-hand side if the variable is needed to choose from different fields
LEFT OUTER JOIN Dashboard_Group_Level_Matching ON
case
when @Level = 'lvl1' then cw.Lvl1
when @Level = 'lvl2' then cw.Lvl2
when @Level = 'lvl3' then cw.Lvl3
end
= Dashboard_Group_Level_Matching.Dashboard_Level_Name
This will show you the longest running SPIDs on a SQL 2000 or SQL 2005 server:
select
P.spid
, right(convert(varchar,
dateadd(ms, datediff(ms, P.last_batch, getdate()), '1900-01-01'),
121), 12) as 'batch_duration'
, P.program_name
, P.hostname
, P.loginame
from master.dbo.sysprocesses P
where P.spid > 50
and P.status not in ('background', 'sleeping')
and P.cmd not in ('AWAITING COMMAND'
,'MIRROR HANDLER'
,'LAZY WRITER'
,'CHECKPOINT SLEEP'
,'RA MANAGER')
order by batch_duration desc
If you need to see the SQL running for a given spid from the results, use something like this:
declare
@spid int
, @stmt_start int
, @stmt_end int
, @sql_handle binary(20)
set @spid = XXX -- Fill this in
select top 1
@sql_handle = sql_handle
, @stmt_start = case stmt_start when 0 then 0 else stmt_start / 2 end
, @stmt_end = case stmt_end when -1 then -1 else stmt_end / 2 end
from sys.sysprocesses
where spid = @spid
order by ecid
SELECT
SUBSTRING( text,
COALESCE(NULLIF(@stmt_start, 0), 1),
CASE @stmt_end
WHEN -1
THEN DATALENGTH(text)
ELSE
(@stmt_end - @stmt_start)
END
)
FROM ::fn_get_sql(@sql_handle)
In response to your first question: Yes, you have to run a server app to send the messages, as well as a client app to receive them.
In response to your second question: Yes, every application needs its own API key. This key is for your server app, not the client.
Yes, you can do almost that:
SELECT dbo.GetBusinessDays(a.opendate,a.closedate) as BusinessDays
FROM account a
WHERE...
I had this problem when I installed MySQL 8.0.15 with the community installer. The my.ini file that came with the installer did not work correctly after it had been edited. I did a full manual install by downloading that zip folder. I was able to create my own my.ini file containing only the parameters that I was concerned about and it worked.
include the parameters in that my.ini file that you are concerned about. so something like this(just ensure that there is already a folder created for the datadir or else initialization won't work):
[mysqld]
basedire=C:\program files\MySQL\MySQL8.0
datadir=D:\MySQL\Data
....continue with whatever parameters you want to include
initialize the data directory by running these two commands in the command prompt:
cd C:\program files\MySQL\MySQL8.0\bin
mysqld --default-file=C:\program files\MySQL\MySQL8.0\my.ini --initialize
install the MySQL server as a service by running these two commands:
cd C:\program files\MySQL\MySQL8.0\bin
mysqld --install --default-file=C:\program files\MySQL\MySQL8.0\my.ini
finally, start the server for the first time by running these two commands:
cd C:\program files\MySQL\MySQL8.0\bin
mysqld --console
I think what you're looking for is thenBy.js: https://github.com/Teun/thenBy.js
It allows you to use the standard Array.sort, but with firstBy().thenBy().thenBy()
style.
If you want a fairly advanced tool to do some serious poking around, look at the Memory Analyzer project at Eclipse, contributed to them by SAP.
Some of what you can do is mind-blowingly good for finding memory leaks etc -- including running a form of limited SQL (OQL) against the in-memory objects, i.e.
SELECT toString(firstName) FROM com.yourcompany.somepackage.User
Totally brilliant.
// CustomCell.swift
protocol CustomCellDelegate {
func tapDeleteButton(at cell: CustomCell)
}
class CustomCell: UICollectionViewCell {
var delegate: CustomCellDelegate?
fileprivate let deleteButton: UIButton = {
let button = UIButton(frame: .zero)
button.setImage(UIImage(named: "delete"), for: .normal)
button.addTarget(self, action: #selector(deleteButtonTapped(_:)), for: .touchUpInside)
button.translatesAutoresizingMaskIntoConstraints = false
return button
}()
@objc fileprivate func deleteButtonTapped(_sender: UIButton) {
delegate?.tapDeleteButton(at: self)
}
}
// ViewController.swift
extension ViewController: UICollectionViewDataSource {
func collectionView(_ collectionView: UICollectionView, cellForItemAt indexPath: IndexPath) -> UICollectionViewCell {
guard let cell = collectionView.dequeueReusableCell(withReuseIdentifier: customCellIdentifier, for: indexPath) as? CustomCell else {
fatalError("Unexpected cell instead of CustomCell")
}
cell.delegate = self
return cell
}
}
extension ViewController: CustomCellDelegate {
func tapDeleteButton(at cell: CustomCell) {
// Here we get the indexPath of the cell what we tapped on.
let indexPath = collectionView.indexPath(for: cell)
}
}
Whether you use currentframe().f_back
depends on whether you are using a
function or not.
Calling inspect directly:
from inspect import currentframe, getframeinfo
cf = currentframe()
filename = getframeinfo(cf).filename
print "This is line 5, python says line ", cf.f_lineno
print "The filename is ", filename
Calling a function that does it for you:
from inspect import currentframe
def get_linenumber():
cf = currentframe()
return cf.f_back.f_lineno
print "This is line 7, python says line ", get_linenumber()
I don't see a solution here that completely answers the question using reactive forms to its fullest extent so here's my solution for the same.
Here's the pith of the detailed explanation along with a StackBlitz example.
FormArray
for the checkboxes and initialize the form.valueChanges
observable is perfect for when you want the form to display something but store something else in the component. Map the true
/false
values to the desired values here.false
values at the time of submission.valueChanges
observable.Use FormArray to define the form
As already mentioned in the answer marked as correct. FormArray
is the way to go in such cases where you would prefer to get the data in an array. So the first thing you need to do is create the form.
checkboxGroup: FormGroup;
checkboxes = [{
name: 'Value 1',
value: 'value-1'
}, {
name: 'Value 2',
value: 'value-2'
}];
this.checkboxGroup = this.fb.group({
checkboxes: this.fb.array(this.checkboxes.map(x => false))
});
This will just set the initial value of all the checkboxes to false
.
Next, we need to register these form variables in the template and iterate over the checkboxes
array (NOT the FormArray
but the checkbox data) to display them in the template.
<form [formGroup]="checkboxGroup">
<ng-container *ngFor="let checkbox of checkboxes; let i = index" formArrayName="checkboxes">
<input type="checkbox" [formControlName]="i" />{{checkbox.name}}
</ng-container>
</form>
Make use of the valueChanges observable
Here's the part I don't see mentioned in any answer given here. In situations such as this, where we would like to display said data but store it as something else, the valueChanges
observable is very helpful. Using valueChanges
, we can observe the changes in the checkboxes
and then map
the true
/false
values received from the FormArray
to the desired data. Note that this will not change the selection of the checkboxes as any truthy value passed to the checkbox will mark it as checked and vice-versa.
subscription: Subscription;
const checkboxControl = (this.checkboxGroup.controls.checkboxes as FormArray);
this.subscription = checkboxControl.valueChanges.subscribe(checkbox => {
checkboxControl.setValue(
checkboxControl.value.map((value, i) => value ? this.checkboxes[i].value : false),
{ emitEvent: false }
);
});
This basically maps the FormArray
values to the original checkboxes
array and returns the value
in case the checkbox is marked as true
, else it returns false
. The emitEvent: false
is important here since setting the FormArray
value without it will cause valueChanges
to emit an event creating an endless loop. By setting emitEvent
to false
, we are making sure the valueChanges
observable does not emit when we set the value here.
Filter out the false values
We cannot directly filter the false
values in the FormArray
because doing so will mess up the template since they are bound to the checkboxes. So the best possible solution is to filter out the false
values during submission. Use the spread operator to do this.
submit() {
const checkboxControl = (this.checkboxGroup.controls.checkboxes as FormArray);
const formValue = {
...this.checkboxGroup.value,
checkboxes: checkboxControl.value.filter(value => !!value)
}
// Submit formValue here instead of this.checkboxGroup.value as it contains the filtered data
}
This basically filters out the falsy values from the checkboxes
.
Unsubscribe from valueChanges
Lastly, don't forget to unsubscribe from valueChanges
ngOnDestroy() {
this.subscription.unsubscribe();
}
Note: There is a special case where a value cannot be set to the FormArray
in valueChanges
, i.e if the checkbox value is set to the number 0
. This will make it look like the checkbox cannot be selected since selecting the checkbox will set the FormControl
as the number 0
(a falsy value) and hence keep it unchecked. It would be preferred not to use the number 0
as a value but if it is required, you have to conditionally set 0
to some truthy value, say string '0'
or just plain true
and then on submitting, convert it back to the number 0
.
The StackBlitz also has code for when you want to pass default values to the checkboxes so they get marked as checked in the UI.
Quick & Dirty: I know it's not the most elegant way, but I usually just added a zero to it and test the result. like so:
function isInteger {
[ $(($1+0)) != 0 ] && echo "$1 is a number" || echo "$1 is not a number"
}
x=1; isInteger $x
x="1"; isInteger $x
x="joe"; isInteger $x
x=0x16 ; isInteger $x
x=-32674; isInteger $x
$(($1+0)) will return 0 or bomb if $1 is NOT an integer. for Example:
function zipIt { # quick zip - unless the 1st parameter is a number
ERROR="not a valid number. "
if [ $(($1+0)) != 0 ] ; then # isInteger($1)
echo " backing up files changed in the last $1 days."
OUT="zipIt-$1-day.tgz"
find . -mtime -$1 -type f -print0 | xargs -0 tar cvzf $OUT
return 1
fi
showError $ERROR
}
NOTE: I guess I never thought to check for floats or mixed types that will make the entire script bomb... in my case, I didn't want it go any further. I'm gonna play around with mrucci's solution and Duffy's regex - they seem the most robust within the bash framework...
It is any operation that every nth result will result in an output matching the value of the 1st result. For instance the absolute value of -1 is 1. The absolute value of the absolute value of -1 is 1. The absolute value of the absolute value of absolute value of -1 is 1. And so on.
See also: When would be a really silly time to use recursion?
For Redmi users,
Settings -> Password & security -> Privacy -> Special app access -> Device admin apps
Click the deactivate the apps
If you're registering a domain and the termination (ex .com
) it is not IDN, as Aaron Hathaway said:
Hostnames are composed of series of labels concatenated with dots, as are all domain names. For example, en.wikipedia.org
is a hostname. Each label must be between 1 and 63 characters long, and the entire hostname (including the delimiting dots but not a trailing dot) has a maximum of 253 ASCII characters.
The Internet standards (Requests for Comments) for protocols mandate that component hostname labels may contain only the ASCII letters a
through z
(in a case-insensitive manner), the digits 0
through 9
, and the hyphen -
. The original specification of hostnames in RFC 952, mandated that labels could not start with a digit or with a hyphen, and must not end with a hyphen. However, a subsequent specification (RFC 1123) permitted hostname labels to start with digits. No other symbols, punctuation characters, or white space are permitted.
Later, Spain with it's .es
, .com.es
, .org.es
, .nom,es
, .gob.es
and .edu.es
introduced IDN tlds, if your tld is one of .es
or any other that supports it, any character can be used, but you can't combine alphabets like Latin, Greek or Cyril in one hostname, and that it respects the things that can't go at the start or at the end.
If you're using non-registered tlds, just for local networking, like with local DNS or with hosts files, you can treat them all as IDN.
Keep in mind some programs could not work well, especially old, outdated and unpopular ones.
First of all I think User's data shouldn't be stored on phone, and if it is must to store data somewhere on the phone it should be encrypted with in the apps private data. Security of users credentials should be the priority of the application.
The sensitive data should be stored securely or not at all. In the event of a lost device or malware infection, data stored insecurely can be compromised.
It's not so much about the language as the tools and libraries. The available libraries and compilers for C are much older than for newer languages. You might think this would make them slower, but au contraire.
These libraries were written at a time when processing power and memory were at a premium. They had to be written very efficiently in order to work at all. Developers of C compilers have also had a long time to work in all sorts of clever optimizations for different processors. C's maturity and wide adoption makes for a signficant advantage over other languages of the same age. It also gives C a speed advantage over newer tools that don't emphasize raw performance as much as C had to.
This question is the first result for Googling "svg rounded corners path". Phrogz suggestion to use stroke
has some limitations (namely, that I cannot use stroke for other purposes, and that the dimensions have to be corrected for the stroke width).
Jlange suggestion to use a curve is better, but not very concrete. I ended up using quadratic Bézier curves for drawing rounded corners. Consider this picture of a corner marked with a blue dot and two red points on adjacent edges:
The two lines could be made with the L
command. To turn this sharp corner into a rounded corner, start drawing a curve from the left red point (use M x,y
to move to that point). Now a quadratic Bézier curve has just a single control point which you must set on the blue point. Set the end of the curve at the right red point. As the tangent at the two red points are in the direction of the previous lines, you will see a fluent transition, "rounded corners".
Now to continue the shape after the rounded corner, a straight line in a Bézier curve can be achieved by setting the control point between on the line between the two corners.
To help me with determining the path, I wrote this Python script that accepts edges and a radius. Vector math makes this actually very easy. The resulting image from the output:
#!/usr/bin/env python
# Given some vectors and a border-radius, output a SVG path with rounded
# corners.
#
# Copyright (C) Peter Wu <[email protected]>
from math import sqrt
class Vector(object):
def __init__(self, x, y):
self.x = x
self.y = y
def sub(self, vec):
return Vector(self.x - vec.x, self.y - vec.y)
def add(self, vec):
return Vector(self.x + vec.x, self.y + vec.y)
def scale(self, n):
return Vector(self.x * n, self.y * n)
def length(self):
return sqrt(self.x**2 + self.y**2)
def normal(self):
length = self.length()
return Vector(self.x / length, self.y / length)
def __str__(self):
x = round(self.x, 2)
y = round(self.y, 2)
return '{},{}'.format(x, y)
# A line from vec_from to vec_to
def line(vec_from, vec_to):
half_vec = vec_from.add(vec_to.sub(vec_from).scale(.5))
return '{} {}'.format(half_vec, vec_to)
# Adds 'n' units to vec_from pointing in direction vec_to
def vecDir(vec_from, vec_to, n):
return vec_from.add(vec_to.sub(vec_from).normal().scale(n))
# Draws a line, but skips 'r' units from the begin and end
def lineR(vec_from, vec_to, r):
vec = vec_to.sub(vec_from).normal().scale(r)
return line(vec_from.add(vec), vec_to.sub(vec))
# An edge in vec_from, to vec_to with radius r
def edge(vec_from, vec_to, r):
v = vecDir(vec_from, vec_to, r)
return '{} {}'.format(vec_from, v)
# Hard-coded border-radius and vectors
r = 5
a = Vector( 0, 60)
b = Vector(100, 0)
c = Vector(100, 200)
d = Vector( 0, 200 - 60)
path = []
# Start below top-left edge
path.append('M {} Q'.format(a.add(Vector(0, r))))
# top-left edge...
path.append(edge(a, b, r))
path.append(lineR(a, b, r))
path.append(edge(b, c, r))
path.append(lineR(b, c, r))
path.append(edge(c, d, r))
path.append(lineR(c, d, r))
path.append(edge(d, a, r))
path.append(lineR(d, a, r))
# Show results that can be pushed into a <path d="..." />
for part in path:
print(part)
Make sure you are calling typeof on the actual function, not a string literal:
function x() {
console.log("hi");
}
typeof "x"; // returns "string"
typeof x; // returns "function"
Another suggestion is using flexbox instead of tables altogether. This is a "modern browser" thing of course, but come on, it's 2016 ;)
At least this might be an alternative solution for those looking for an answer to this nowadays, since the original post was from 2010.
Here's a great guide: https://css-tricks.com/snippets/css/a-guide-to-flexbox/
.table {_x000D_
border: 1px solid red;_x000D_
padding: 2px;_x000D_
max-width: 300px;_x000D_
display: flex;_x000D_
flex-flow: row wrap;_x000D_
}_x000D_
.table-cell {_x000D_
border: 1px solid blue;_x000D_
flex: 1 30%;_x000D_
}_x000D_
.colspan-3 {_x000D_
border: 1px solid green;_x000D_
flex: 1 100%;_x000D_
}
_x000D_
<div class="table">_x000D_
<div class="table-cell">_x000D_
row 1 - cell 1_x000D_
</div>_x000D_
<div class="table-cell">_x000D_
row 1 - cell 2_x000D_
</div>_x000D_
<div class="table-cell">_x000D_
row 1 - cell 3_x000D_
</div>_x000D_
<div class="table-cell colspan-3">_x000D_
row 2 - cell 1 (spans 3 columns)_x000D_
</div>_x000D_
</div>
_x000D_
Set step
attribute to any float number, e.g. 0.01 and you are good to go.
Create a DSN something like this (ASEDEV) for your connection and try to use DSN instead of DRIVER like below:
enter code here
import pyodbc
cnxn = pyodbc.connect('DSN=ASEDEV;User ID=sa;Password=sybase123')
mycur = cnxn.cursor()
mycur.execute("select * from master..sysdatabases")
row = mycur.fetchone()
while row:
print(row)
row = mycur.fetchone()`
put the table inside the div to make scrollable table vertically. change overflow-y
to overflow-x
to make table scrollable horizontally. just overflow
to make table scrollable both horizontal and vertical.
<div style="overflow-y: scroll;">
<table>
...
</table>
</div>
Can we see your import
block? because it seems that you have imported the wrong Iterator
class.
The one you should use is java.util.Iterator
To make sure, try:
java.util.Iterator iter = hm.keySet().iterator();
I personally suggest the following:
Map Declaration using Generics
and declaration using the Interface Map<K,V>
and instance creation using the desired implementation HashMap<K,V>
Map<Integer, String> hm = new HashMap<>();
and for the loop:
for (Integer key : hm.keySet()) {
System.out.println("Key = " + key + " - " + hm.get(key));
}
UPDATE 3/5/2015
Found out that iterating over the Entry set will be better performance wise:
for (Map.Entry<Integer, String> entry : hm.entrySet()) {
Integer key = entry.getKey();
String value = entry.getValue();
}
UPDATE 10/3/2017
For Java8 and streams, your solution will be (Thanks @Shihe Zhang)
hm.forEach((key, value) -> System.out.println(key + ": " + value))
DataMember attribute is not mandatory to add to serialize data. When DataMember attribute is not added, old XMLSerializer serializes the data. Adding a DataMember provides useful properties like order, name, isrequired which cannot be used otherwise.
NOTE: In 2016, you can probably use
flexbox
to solve this problem easier.
This method works correctly IE7+ and all major browsers, it's been tried and tested in a number of complex viewport-based web applications.
<style>
.container {
font-size: 0;
}
.ie7 .column {
font-size: 16px;
display: inline;
zoom: 1;
}
.ie8 .column {
font-size:16px;
}
.ie9_and_newer .column {
display: inline-block;
width: 50%;
font-size: 1rem;
}
</style>
<div class="container">
<div class="column">text that can wrap</div>
<div class="column">text that can wrap</div>
</div>
Live demo: http://output.jsbin.com/sekeco/2
The only downside to this method for IE7/8, is relying on body {font-size:??px}
as basis for em/%-based font-sizing.
IE7/IE8 specific CSS could be served using IE's Conditional comments
Node is complaining because there is no function called define
, which your code tries to call on its very first line.
define
comes from AMD, which is not used in standard node development.
It is possible that the developer you got your project from used some kind of trickery to use AMD in node. You should ask this person what special steps are necessary to run the code.
You may use:
$("#foo").unbind('click');
to make sure all click events are unbinded, then attach your event
You could call it just style, but I prefer aliasing to improve readability.
UPDATE A
SET ControllingSalesRep = RA.SalesRepCode
from DHE.dbo.tblAccounts A
INNER JOIN DHE_Import.dbo.tblSalesRepsAccountsLink RA
ON A.AccountCode = RA.AccountCode
For MySQL
UPDATE DHE.dbo.tblAccounts A
INNER JOIN DHE_Import.dbo.tblSalesRepsAccountsLink RA
ON A.AccountCode = RA.AccountCode
SET A.ControllingSalesRep = RA.SalesRepCode
Be wary of using ExpectedException, as it can lead to several pitfalls as demonstrated here:
http://geekswithblogs.net/sdorman/archive/2009/01/17/unit-testing-and-expected-exceptions.aspx
And here:
http://xunit.github.io/docs/comparisons.html
If you need to test for exceptions, there are less frowned upon ways. You can use the try{act/fail}catch{assert}
method, which can be useful for frameworks that don't have direct support for exception tests other than ExpectedException
.
A better alternative is to use xUnit.NET, which is a very modern, forward looking, and extensible unit testing framework that has learned from all the others mistakes, and improved. One such improvement is Assert.Throws
, which provides a much better syntax for asserting exceptions.
You can find xUnit.NET at github: http://xunit.github.io/
Comment space too small, so here is some more information for you on the use of static final
. As I said in my comment to the Andrzej's answer, only primitive and String
are compiled directly into the code as literals. To demonstrate this, try the following:
You can see this in action by creating three classes (in separate files):
public class DisplayValue {
private String value;
public DisplayValue(String value) {
this.value = value;
}
public String toString() {
return value;
}
}
public class Constants {
public static final int INT_VALUE = 0;
public static final DisplayValue VALUE = new DisplayValue("A");
}
public class Test {
public static void main(String[] args) {
System.out.println("Int = " + Constants.INT_VALUE);
System.out.println("Value = " + Constants.VALUE);
}
}
Compile these and run Test, which prints:
Int = 0
Value = A
Now, change Constants
to have a different value for each and just compile class Constants
. When you execute Test
again (without recompiling the class file) it still prints the old value for INT_VALUE
but not VALUE
. For example:
public class Constants {
public static final int INT_VALUE = 2;
public static final DisplayValue VALUE = new DisplayValue("X");
}
Run Test without recompiling Test.java
:
Int = 0
Value = X
Note that any other type used with static final
is kept as a reference.
Similar to C/C++ #if
/#endif
, a constant literal or one defined through static final
with primitives, used in a regular Java if
condition and evaluates to false
will cause the compiler to strip the byte code for the statements within the if
block (they will not be generated).
private static final boolean DEBUG = false;
if (DEBUG) {
...code here...
}
The code at "...code here..." would not be compiled into the byte code. But if you changed DEBUG
to true
then it would be.
use DBName
select * from TABLE_NAME A
where A.date >= '2018-06-26 21:24' and A.date <= '2018-06-26 21:28';
Use Do...Loop with Until keyword
num=0
Do Until //certain_condition_to_break_loop
num=num+1
Loop
This loop will continue to execute, Until the condition becomes true
While...Wend is the old syntax and does not provide feature to break loop! Prefer do while loops
For people looking this up now:
It seems that now setting the User-Agent
header is allowed since Firefox 43. See https://developer.mozilla.org/en-US/docs/Glossary/Forbidden_header_name for the current list of forbidden headers.
With SSL the encryption is at the transport level, so it takes place before a request is sent.
So everything in the request is encrypted.
Create a C# class that maps to your Json and use Newsoft JsonConvert
to Deserialise it.
For example:
public Class MyResponse
{
public Meta Meta { get; set; }
public Response Response { get; set; }
}
You're missing a GROUP BY clause:
SELECT news.id, users.username, news.title, news.date, news.body, COUNT(comments.id)
FROM news
LEFT JOIN users
ON news.user_id = users.id
LEFT JOIN comments
ON comments.news_id = news.id
GROUP BY news.id
The left join is correct. If you used an INNER or RIGHT JOIN then you wouldn't get news items that didn't have comments.
The canonical way to get an interactive shell with docker-compose is to use:
docker-compose run --rm myapp
You can set stdin_open: true, tty: true
, however that won't actually give you a proper shell with up
, because logs are being streamed from all the containers.
You can also use
docker exec -ti <container name> /bin/bash
to get a shell on a running container.
<link href="https://stackpath.bootstrapcdn.com/bootstrap/4.4.1/css/bootstrap.min.css" rel="stylesheet"/>_x000D_
_x000D_
<table class="table table-bordered">_x000D_
<thead>_x000D_
<tr>_x000D_
<th></th>_x000D_
<th class="text-center">Left</th>_x000D_
<th class="text-center">Center</th>_x000D_
<th class="text-center">Right</th>_x000D_
</tr>_x000D_
</thead>_x000D_
<tbody>_x000D_
<tr>_x000D_
<th>_x000D_
<span>Bootstrap (class="text-left")</span>_x000D_
</th>_x000D_
<td class="text-left">_x000D_
<input type="checkbox" />_x000D_
</td>_x000D_
<td class="text-center">_x000D_
<input type="checkbox" checked />_x000D_
</td>_x000D_
<td class="text-right">_x000D_
<input type="checkbox" />_x000D_
</td>_x000D_
</tr>_x000D_
<tr>_x000D_
<th>_x000D_
<span>HTML attribute (align="left")</span>_x000D_
</th>_x000D_
<td align="left">_x000D_
<input type="checkbox" />_x000D_
</td>_x000D_
<td align="center">_x000D_
<input type="checkbox" checked />_x000D_
</td>_x000D_
<td align="right">_x000D_
<input type="checkbox" />_x000D_
</td>_x000D_
</tr>_x000D_
</tbody>_x000D_
</table>
_x000D_
Sometimes the easiest way to fix this issue is to make a new branch from the place where you know the code is good. Then you can leave the errant branch history alone in case you need to cherry-pick other commits from it later. This also ensures you did not lose any commit history.
From your local errant branch:
git log
copy the commit hash that you wanted the branch to be at and exit the git log
git checkout theHashYouJustCopied
git checkout -b your_new_awesome_branch
Now you have a new branch just the way you want it.
If you also needed to keep a specific commit from the errant branch that is not on your new branch, you can just cherry-pick that specific commit you need:
git checkout the_errant_branch
git log
Copy the commit hash of the one commit you need to pull into the good branch and exit the git log.
git checkout your_new_awesome_branch
git cherry-pick theHashYouJustCopied
Pat yourself on the back.
You do not have permissions to access the file. Please be sure whether you can access the file in that drive.
string route= @"E:\Sample.text";
FileStream fs = new FileStream(route, FileMode.Create);
You have to provide the file name to create. Please try this, now you can create.
you can get the nodejs configuration from http://nodejs.org/
The important thing you need to keep in your mind is about its configuration in file app.js which consists of port number host and other settings these are settings working for me
backendSettings = { "scheme":"https / http ", "host":"Your website url", "port":49165, //port number 'sslKeyPath': 'Path for key', 'sslCertPath': 'path for SSL certificate', 'sslCAPath': '', "resource":"/socket.io", "baseAuthPath": '/nodejs/', "publishUrl":"publish", "serviceKey":"", "backend":{ "port":443, "scheme": 'https / http', //whatever is your website scheme "host":"host name", "messagePath":"/nodejs/message/"}, "clientsCanWriteToChannels":false, "clientsCanWriteToClients":false, "extensions":"", "debug":false, "addUserToChannelUrl": 'user/channel/add/:channel/:uid', "publishMessageToContentChannelUrl": 'content/token/message', "transports":["websocket", "flashsocket", "htmlfile", "xhr-polling", "jsonp-polling"], "jsMinification":true, "jsEtag":true, "logLevel":1};
In this if you are getting "Error: listen EADDRINUSE" then please change the port number i.e, here I am using "49165" so you can use other port such as 49170 or some other port.
For this you can refer to the following article
http://www.a2hosting.com/kb/installable-applications/manual-installations/installing-node-js-on-shared-hosting-accounts
A summary.lm
object stores these values in a matrix
called 'coefficients'
. So the value you are after can be accessed with:
a2Pval <- summary(mg)$coefficients[2, 4]
Or, more generally/readably, coef(summary(mg))["a2","Pr(>|t|)"]
. See here for why this method is preferred.
$(document.createElement("img")).attr({
src: 'https://graph.facebook.com/'+friend.id+'/picture',
title: friend.name ,
'data-friend-id':friend.id,
'data-friend-name':friend.name
}).appendTo(divContainer);
As I read your question, I have tried without success to search on the Internet how Bearer tokens are encrypted or signed. I guess bearer tokens are not hashed (maybe partially, but not completely) because in that case, it will not be possible to decrypt it and retrieve users properties from it.
But your question seems to be trying to find answers on Bearer token functionality:
Suppose I am implementing an authorization provider, can I supply any kind of string for the bearer token? Can it be a random string? Does it has to be a base64 encoding of some attributes? Should it be hashed?
So, I'll try to explain how Bearer tokens and Refresh tokens work:
When user requests to the server for a token sending user and password through SSL, the server returns two things: an Access token and a Refresh token.
An Access token is a Bearer token that you will have to add in all request headers to be authenticated as a concrete user.
Authorization: Bearer <access_token>
An Access token is an encrypted string with all User properties, Claims and Roles that you wish. (You can check that the size of a token increases if you add more roles or claims). Once the Resource Server receives an access token, it will be able to decrypt it and read these user properties. This way, the user will be validated and granted along with all the application.
Access tokens have a short expiration (ie. 30 minutes). If access tokens had a long expiration it would be a problem, because theoretically there is no possibility to revoke it. So imagine a user with a role="Admin" that changes to "User". If a user keeps the old token with role="Admin" he will be able to access till the token expiration with Admin rights. That's why access tokens have a short expiration.
But, one issue comes in mind. If an access token has short expiration, we have to send every short period the user and password. Is this secure? No, it isn't. We should avoid it. That's when Refresh tokens appear to solve this problem.
Refresh tokens are stored in DB and will have long expiration (example: 1 month).
A user can get a new Access token (when it expires, every 30 minutes for example) using a refresh token, that the user had received in the first request for a token. When an access token expires, the client must send a refresh token. If this refresh token exists in DB, the server will return to the client a new access token and another refresh token (and will replace the old refresh token by the new one).
In case a user Access token has been compromised, the refresh token of that user must be deleted from DB. This way the token will be valid only till the access token expires because when the hacker tries to get a new access token sending the refresh token, this action will be denied.
The other answers here didn't work for me, but I found a pretty simple solution that did work.
I made the default one the last one listed, and I gave it ServerAlias *
.
For example:
NameVirtualHost *:80
<VirtualHost *:80>
ServerName www.secondwebsite.com
ServerAlias secondwebsite.com *.secondwebsite.com
DocumentRoot /home/secondwebsite/web
</VirtualHost>
<VirtualHost *:80>
ServerName www.defaultwebsite.com
ServerAlias *
DocumentRoot /home/defaultwebsite/web
</VirtualHost>
If the visitor didn't explicitly choose to go to something ending in secondwebsite.com
, they get the default website.
I had this issue myself, and I wanted to both be able to set the width, and have it update on rotate and allow the user to scale and zoom the page (the current answer provides the first but prevents the later as a side-effect).. so I came up with a fix that keeps the view width correct for the orientation, but still allows for zooming, though it is not super straight forward.
First, add the following Javascript to the webpage you are displaying:
<script type='text/javascript'>
function setViewPortWidth(width) {
var metatags = document.getElementsByTagName('meta');
for(cnt = 0; cnt < metatags.length; cnt++) {
var element = metatags[cnt];
if(element.getAttribute('name') == 'viewport') {
element.setAttribute('content','width = '+width+'; maximum-scale = 5; user-scalable = yes');
document.body.style['max-width'] = width+'px';
}
}
}
</script>
Then in your - (void)didRotateFromInterfaceOrientation:(UIInterfaceOrientation)fromInterfaceOrientation method, add:
float availableWidth = [EmailVC webViewWidth];
NSString *stringJS;
stringJS = [NSString stringWithFormat:@"document.body.offsetWidth"];
float documentWidth = [[_webView stringByEvaluatingJavaScriptFromString:stringJS] floatValue];
if(documentWidth > availableWidth) return; // Don't perform if the document width is larger then available (allow auto-scale)
// Function setViewPortWidth defined in EmailBodyProtocolHandler prepend
stringJS = [NSString stringWithFormat:@"setViewPortWidth(%f);",availableWidth];
[_webView stringByEvaluatingJavaScriptFromString:stringJS];
Additional Tweaking can be done by modifying more of the viewportal content settings:
Also, I understand you can put a JS listener for onresize or something like to trigger the rescaling, but this worked for me as I'm doing it from Cocoa Touch UI frameworks.
Hope this helps someone :)
same as @Moo-Juice:
const char* args[] = {"01", "02", "03", "04"};
std::vector<std::string> v(args, args + sizeof(args)/sizeof(args[0])); //get array size
You can also use JS if needed
var winHeight = window.innerHeight ||
document.documentElement.clientHeight ||
document.body.clientHeight;
var pageHeight = $('body').height();
if (pageHeight < winHeight) {
$('.main-content,').css('min-height',winHeight)
}
<input type="checkbox" checked="checked" />
or simply
<input type="checkbox" checked />
for checked checkbox.
No checked attribute (<input type="checkbox" />
) for unchecked checkbox.
reference: http://www.w3.org/TR/html-markup/input.checkbox.html#input.checkbox.attrs.checked
I feel only very few approaches here doesn't risk the prospect OP the most worry (Marc Gravell, Stevo3000, Richard Szalay, Neil, Darren Koppand) and most are unnecessarily complex. Being fully aware this is useless micro-optimization, let me say you should basically employ these:
1) Don't read the value from DataReader/DataRow twice - so either cache it before null checks and casts/conversions or even better directly pass your record[X]
object to a custom extension method with appropriate signature.
2) To obey the above, do not use built in IsDBNull
function on your DataReader/DataRow since that calls the record[X]
internally, so in effect you will be doing it twice.
3) Type comparison will be always slower than value comparison as a general rule. Just do record[X] == DBNull.Value
better.
4) Direct casting will be faster than calling Convert
class for converting, though I fear the latter will falter less.
5) Lastly, accessing record by index rather than column name will be faster again.
I feel going by the approaches of Szalay, Neil and Darren Koppand will be better. I particularly like Darren Koppand's extension method approach which takes in IDataRecord
(though I would like to narrow it down further to IDataReader
) and index/column name.
Take care to call it:
record.GetColumnValue<int?>("field");
and not
record.GetColumnValue<int>("field");
in case you need to differentiate between 0
and DBNull
. For example, if you have null values in enum fields, otherwise default(MyEnum)
risks first enum value being returned. So better call record.GetColumnValue<MyEnum?>("Field")
.
Since you're reading from a DataRow
, I would create extension method for both DataRow
and IDataReader
by DRYing common code.
public static T Get<T>(this DataRow dr, int index, T defaultValue = default(T))
{
return dr[index].Get<T>(defaultValue);
}
static T Get<T>(this object obj, T defaultValue) //Private method on object.. just to use internally.
{
if (obj.IsNull())
return defaultValue;
return (T)obj;
}
public static bool IsNull<T>(this T obj) where T : class
{
return (object)obj == null || obj == DBNull.Value;
}
public static T Get<T>(this IDataReader dr, int index, T defaultValue = default(T))
{
return dr[index].Get<T>(defaultValue);
}
So now call it like:
record.Get<int>(1); //if DBNull should be treated as 0
record.Get<int?>(1); //if DBNull should be treated as null
record.Get<int>(1, -1); //if DBNull should be treated as a custom value, say -1
I believe this is how it should have been in the framework (instead of the record.GetInt32
, record.GetString
etc methods) in the first place - no run-time exceptions and gives us the flexibility to handle null values.
From my experience I had less luck with one generic method to read from the database. I always had to custom handle various types, so I had to write my own GetInt
, GetEnum
, GetGuid
, etc. methods in the long run. What if you wanted to trim white spaces when reading string from db by default, or treat DBNull
as empty string? Or if your decimal should be truncated of all trailing zeroes. I had most trouble with Guid
type where different connector drivers behaved differently that too when underlying databases can store them as string or binary. I have an overload like this:
static T Get<T>(this object obj, T defaultValue, Func<object, T> converter)
{
if (obj.IsNull())
return defaultValue;
return converter == null ? (T)obj : converter(obj);
}
With Stevo3000's approach, I find the calling a bit ugly and tedious, and it will be harder to make a generic function out of it.
While I am a fan of Joda-Time, Java 8 introduces the java.time package which is finally a worthwhile Java standard solution! Read this article, Java SE 8 Date and Time, for a good amount of information on java.time outside of hours and minutes.
In particular, look at the LocalDateTime
class.
Hours and minutes:
LocalDateTime.now().getHour();
LocalDateTime.now().getMinute();
By combining Radek and l0co's answers you can access the WSDL behind https:
SSLContext sc = SSLContext.getInstance("TLS");
KeyManagerFactory kmf = KeyManagerFactory
.getInstance(KeyManagerFactory.getDefaultAlgorithm());
KeyStore ks = KeyStore.getInstance("JKS");
ks.load(getClass().getResourceAsStream(keystore),
password.toCharArray());
kmf.init(ks, password.toCharArray());
sc.init(kmf.getKeyManagers(), null, null);
HttpsURLConnection
.setDefaultSSLSocketFactory(sc.getSocketFactory());
yourService = new YourService(url); //Handshake should succeed
double[][]
are called jagged arrays , The inner dimensions aren’t specified in the declaration. Unlike a rectangular array, each inner array can be an arbitrary length. Each inner array is implicitly initialized to null rather than an empty array. Each inner array must be created manually: Reference [C# 4.0 in nutshell The definitive Reference]
for (int i = 0; i < matrix.Length; i++)
{
matrix[i] = new int [3]; // Create inner array
for (int j = 0; j < matrix[i].Length; j++)
matrix[i][j] = i * 3 + j;
}
double[,]
are called rectangular arrays
, which are declared using commas to separate each dimension. The following piece of code declares a rectangular 3-by-3 two-dimensional array, initializing it with numbers from 0 to 8:
int [,] matrix = new int [3, 3];
for (int i = 0; i < matrix.GetLength(0); i++)
for (int j = 0; j < matrix.GetLength(1); j++)
matrix [i, j] = i * 3 + j;
Not possible, per MSDN:
You can have the same code execute for multiple trigger types, but the syntax does not allow for multiple code blocks in one trigger:
Trigger on an INSERT, UPDATE, or DELETE statement to a table or view (DML Trigger)
CREATE TRIGGER [ schema_name . ]trigger_name ON { table | view } [ WITH <dml_trigger_option> [ ,...n ] ] { FOR | AFTER | INSTEAD OF } { [ INSERT ] [ , ] [ UPDATE ] [ , ] [ DELETE ] } [ NOT FOR REPLICATION ] AS { sql_statement [ ; ] [ ,...n ] | EXTERNAL NAME <method specifier [ ; ] > }
echo -n Aa | hexdump -e '/1 "%02x"'; echo
You could try a formatter like this
They will always be limited because they don't (and can't) know what user defined functions you may have defined in your database (or which built-in functions you have or don't have access to).
You could also look at ANTLR (but that would be an offline solution)
sizeof()
is just an alias of count()
as mentioned here
Applying conditional statements in ON / WHERE
Here I have explained the logical query processing steps.
Reference: Inside Microsoft® SQL Server™ 2005 T-SQL Querying
Publisher: Microsoft Press
Pub Date: March 07, 2006
Print ISBN-10: 0-7356-2313-9
Print ISBN-13: 978-0-7356-2313-2
Pages: 640
Inside Microsoft® SQL Server™ 2005 T-SQL Querying
(8) SELECT (9) DISTINCT (11) TOP <top_specification> <select_list>
(1) FROM <left_table>
(3) <join_type> JOIN <right_table>
(2) ON <join_condition>
(4) WHERE <where_condition>
(5) GROUP BY <group_by_list>
(6) WITH {CUBE | ROLLUP}
(7) HAVING <having_condition>
(10) ORDER BY <order_by_list>
The first noticeable aspect of SQL that is different than other programming languages is the order in which the code is processed. In most programming languages, the code is processed in the order in which it is written. In SQL, the first clause that is processed is the FROM clause, while the SELECT clause, which appears first, is processed almost last.
Each step generates a virtual table that is used as the input to the following step. These virtual tables are not available to the caller (client application or outer query). Only the table generated by the final step is returned to the caller. If a certain clause is not specified in a query, the corresponding step is simply skipped.
Don't worry too much if the description of the steps doesn't seem to make much sense for now. These are provided as a reference. Sections that come after the scenario example will cover the steps in much more detail.
FROM: A Cartesian product (cross join) is performed between the first two tables in the FROM clause, and as a result, virtual table VT1 is generated.
ON: The ON filter is applied to VT1. Only rows for which the <join_condition>
is TRUE are inserted to VT2.
OUTER (join): If an OUTER JOIN is specified (as opposed to a CROSS JOIN or an INNER JOIN), rows from the preserved table or tables for which a match was not found are added to the rows from VT2 as outer rows, generating VT3. If more than two tables appear in the FROM clause, steps 1 through 3 are applied repeatedly between the result of the last join and the next table in the FROM clause until all tables are processed.
WHERE: The WHERE filter is applied to VT3. Only rows for which the <where_condition>
is TRUE are inserted to VT4.
GROUP BY: The rows from VT4 are arranged in groups based on the column list specified in the GROUP BY clause. VT5 is generated.
CUBE | ROLLUP: Supergroups (groups of groups) are added to the rows from VT5, generating VT6.
HAVING: The HAVING filter is applied to VT6. Only groups for which the <having_condition>
is TRUE are inserted to VT7.
SELECT: The SELECT list is processed, generating VT8.
DISTINCT: Duplicate rows are removed from VT8. VT9 is generated.
ORDER BY: The rows from VT9 are sorted according to the column list specified in the ORDER BY clause. A cursor is generated (VC10).
TOP: The specified number or percentage of rows is selected from the beginning of VC10. Table VT11 is generated and returned to the caller.
(Applying conditional statements in ON / WHERE will not make much difference in few cases. This depends on how many tables you have joined and the number of rows available in each join tables)
Use .length
to count number of characters, and $.trim()
function to remove spaces, and replace(/ /g,'')
to replace multiple spaces with just one. Here is an example:
var str = " Hel lo ";
console.log(str.length);
console.log($.trim(str).length);
console.log(str.replace(/ /g,'').length);
Output:
20
7
5
Source: How to count number of characters in a string with JQuery
Lots of answers already here, but I found they didn't handle all cases, such as the base and target being the same. This function takes a base directory and a target path and returns the relative path. If no relative path exists, the target path is returned. File.separator is unnecessary.
public static String getRelativePath (String baseDir, String targetPath) {
String[] base = baseDir.replace('\\', '/').split("\\/");
targetPath = targetPath.replace('\\', '/');
String[] target = targetPath.split("\\/");
// Count common elements and their length.
int commonCount = 0, commonLength = 0, maxCount = Math.min(target.length, base.length);
while (commonCount < maxCount) {
String targetElement = target[commonCount];
if (!targetElement.equals(base[commonCount])) break;
commonCount++;
commonLength += targetElement.length() + 1; // Directory name length plus slash.
}
if (commonCount == 0) return targetPath; // No common path element.
int targetLength = targetPath.length();
int dirsUp = base.length - commonCount;
StringBuffer relative = new StringBuffer(dirsUp * 3 + targetLength - commonLength + 1);
for (int i = 0; i < dirsUp; i++)
relative.append("../");
if (commonLength < targetLength) relative.append(targetPath.substring(commonLength));
return relative.toString();
}
The C++ standard requires a definition for your static const member if the definition is somehow needed.
The definition is required, for example if it's address is used. push_back
takes its parameter by const reference, and so strictly the compiler needs the address of your member and you need to define it in the namespace.
When you explicitly cast the constant, you're creating a temporary and it's this temporary which is bound to the reference (under special rules in the standard).
This is a really interesting case, and I actually think it's worth raising an issue so that the std be changed to have the same behaviour for your constant member!
Although, in a weird kind of way this could be seen as a legitimate use of the unary '+' operator. Basically the result of the unary +
is an rvalue and so the rules for binding of rvalues to const references apply and we don't use the address of our static const member:
v.push_back( +Foo::MEMBER );
Since there are many different kinds of casting each with different semantics, static_cast<> allows you to say "I'm doing a legal conversion from one type to another" like from int to double. A plain C-style cast can mean a lot of things. Are you up/down casting? Are you reinterpreting a pointer?
Use the Linux split command:
split -l 20 file.txt new
Split the file "file.txt" into files beginning with the name "new" each containing 20 lines of text each.
Type man split
at the Unix prompt for more information. However you will have to first remove the header from file.txt (using the tail
command, for example) and then add it back on to each of the split files.
You seem to look for the input attribute value
, "the initial value of the control"?
<input type="text" value="Morlodenhof 7" />
https://developer.mozilla.org/de/docs/Web/HTML/Element/Input#attr-value
In most of cases it is data log problem. Follow the steps.
i) Go to data folder of mysql. For xampp go to C:\xampp\mysql\data.
ii) Look for log file name like ib_logfile0 and ib_logfile1.
iii) Create backup and delete those files.
iv) Restart apache and mysql.
You can make an Embedded class
, which contains your two keys, and then have a reference to that class as EmbeddedId
in your Entity
.
You would need the @EmbeddedId
and @Embeddable
annotations.
@Entity
public class YourEntity {
@EmbeddedId
private MyKey myKey;
@Column(name = "ColumnA")
private String columnA;
/** Your getters and setters **/
}
@Embeddable
public class MyKey implements Serializable {
@Column(name = "Id", nullable = false)
private int id;
@Column(name = "Version", nullable = false)
private int version;
/** getters and setters **/
}
Another way to achieve this task is to use @IdClass
annotation, and place both your id
in that IdClass
. Now you can use normal @Id
annotation on both the attributes
@Entity
@IdClass(MyKey.class)
public class YourEntity {
@Id
private int id;
@Id
private int version;
}
public class MyKey implements Serializable {
private int id;
private int version;
}
<link rel="stylesheet" type="text/css" href="https://maxcdn.bootstrapcdn.com/font-awesome/4.7.0/css/font-awesome.min.css">
_x000D_
.tree-view-com ul li {_x000D_
position: relative;_x000D_
list-style: none;_x000D_
}_x000D_
.tree-view-com .tree-view-child > li{_x000D_
padding-bottom: 30px;_x000D_
}_x000D_
.tree-view-com .tree-view-child > li:last-of-type{_x000D_
padding-bottom: 0px;_x000D_
}_x000D_
_x000D_
.tree-view-com ul li a .c-icon {_x000D_
margin-right: 10px;_x000D_
position: relative;_x000D_
top: 2px;_x000D_
}_x000D_
.tree-view-com ul > li > ul {_x000D_
margin-top: 20px;_x000D_
position: relative;_x000D_
}_x000D_
.tree-view-com > ul > li:before {_x000D_
content: "";_x000D_
border-left: 1px dashed #ccc;_x000D_
position: absolute;_x000D_
height: calc(100% - 30px - 5px);_x000D_
z-index: 1;_x000D_
left: 8px;_x000D_
top: 30px;_x000D_
}_x000D_
.tree-view-com > ul > li > ul > li:before {_x000D_
content: "";_x000D_
border-top: 1px dashed #ccc;_x000D_
position: absolute;_x000D_
width: 25px;_x000D_
left: -32px;_x000D_
top: 12px;_x000D_
}
_x000D_
<div class="tree-view-com">_x000D_
<ul class="tree-view-parent">_x000D_
<li>_x000D_
<a href=""><i class="fa fa-folder c-icon c-icon-list" aria-hidden="true"></i> folder</a>_x000D_
<ul class="tree-view-child">_x000D_
<li>_x000D_
<a href="" class="document-title">_x000D_
<i class="fa fa-folder c-icon" aria-hidden="true"></i>_x000D_
sub folder 1_x000D_
</a>_x000D_
</li>_x000D_
<li>_x000D_
<a href="" class="document-title">_x000D_
<i class="fa fa-folder c-icon" aria-hidden="true"></i>_x000D_
sub folder 2_x000D_
</a>_x000D_
</li>_x000D_
<li>_x000D_
<a href="" class="document-title">_x000D_
<i class="fa fa-folder c-icon" aria-hidden="true"></i>_x000D_
sub folder 3_x000D_
</a>_x000D_
</li>_x000D_
</ul>_x000D_
</li>_x000D_
</ul>_x000D_
</div>
_x000D_
From the documentation page
To set the page type pass the value in constructor
jsPDF(orientation, unit, format)
Creates new jsPDF document objectinstance Parameters:
orientation One of "portrait" or "landscape" (or shortcuts "p" (Default), "l")
unit Measurement unit to be used when coordinates are specified. One of "pt" (points), "mm" (Default), "cm", "in"
format One of 'a3', 'a4' (Default),'a5' ,'letter' ,'legal'
To set font size
setFontSize(size)
Sets font size for upcoming text elements.
Parameters:
{Number} size Font size in points.
OutputStream writes bytes, String provides chars. You need to define Charset to encode string to byte[]:
outputStream.write(string.getBytes(Charset.forName("UTF-8")));
Change UTF-8
to a charset of your choice.
So, youtube gives out the iframe tag as follows:
<iframe width="560" height="315" src="https://www.youtube.com/embed/2EIeUlvHAiM" frameborder="0" allowfullscreen></iframe>
In my case, i just changed it to width="100%" and left the rest as is. It's not the most elegant solution (after all, in different devices you'll get weird ratios) But the video itself does not get deformed, just the frame.
var days = 7;
var date = new Date();
var res = date.setTime(date.getTime() + (days * 24 * 60 * 60 * 1000));
var d = new Date(res);
var month = d.getMonth() + 1;
var day = d.getDate();
var output = d.getFullYear() + '/' +
(month < 10 ? '0' : '') + month + '/' +
(day < 10 ? '0' : '') + day;
$('#txtEndDate').val(output);
Just want to share my button style from my ResourceDictionary that i've been using. You can freely change the onHover background at the style triggers. "ColorAnimation To = *your desired BG(i.e #FFCEF7A0)". The button BG will also automatically revert to its original BG after the mouseOver state.You can even set how fast the transition.
Resource Dictionary
<Style x:Key="Flat_Button" TargetType="{x:Type Button}">
<Setter Property="Width" Value="100"/>
<Setter Property="Height" Value="50"/>
<Setter Property="Margin" Value="2"/>
<Setter Property="FontFamily" Value="Arial Narrow"/>
<Setter Property="FontSize" Value="12px"/>
<Setter Property="FontWeight" Value="Bold"/>
<Setter Property="Cursor" Value="Hand"/>
<Setter Property="Foreground">
<Setter.Value>
<SolidColorBrush Opacity="1" Color="White"/>
</Setter.Value>
</Setter>
<Setter Property="Background" >
<Setter.Value>
<SolidColorBrush Opacity="1" Color="#28C2FF" />
</Setter.Value>
</Setter>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type Button}">
<Border x:Name="border"
SnapsToDevicePixels="True"
BorderThickness="1"
Padding="4,2"
BorderBrush="Gray"
CornerRadius="3"
Background="{TemplateBinding Background}">
<Grid>
<ContentPresenter
Margin="2"
HorizontalAlignment="Center"
VerticalAlignment="Center"
RecognizesAccessKey="True" />
</Grid>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
<Style.Triggers>
<Trigger Property="IsMouseOver" Value="true">
<Trigger.EnterActions>
<BeginStoryboard>
<Storyboard>
<ColorAnimation To="#D2F898"
Storyboard.TargetProperty="(Control.Background).(SolidColorBrush.Color)"
FillBehavior="HoldEnd" Duration="0:0:0.25" AutoReverse="False" RepeatBehavior="1x"/>
</Storyboard>
</BeginStoryboard>
</Trigger.EnterActions>
<Trigger.ExitActions>
<BeginStoryboard>
<Storyboard>
<ColorAnimation
Storyboard.TargetProperty="(Control.Background).(SolidColorBrush.Color)"
FillBehavior="HoldEnd" Duration="0:0:0.25" AutoReverse="False" RepeatBehavior="1x"/>
</Storyboard>
</BeginStoryboard>
</Trigger.ExitActions>
</Trigger>
</Style.Triggers>
</Style>
all you have to do is call the style.
Example Implementation
<Button Style="{StaticResource Flat_Button}" Height="Auto"Width="Auto">
<StackPanel>
<TextBlock Text="SAVE" FontFamily="Arial" FontSize="10.667"/>
</StackPanel>
</Button>
.navbar-nav {
float: left;
margin: 0;
margin-left: 40%;
}
.navbar-nav.navbar-right:last-child {
margin-right: -15px;
margin-left: 0;
}
Since You Have used the float
property we don't have many options except to adjust it manually.
The Python approach to "main" is almost unique to the language(*).
The semantics are a bit subtle. The __name__
identifier is bound to the name of any module as it's being imported. However, when a file is being executed then __name__
is set to "__main__"
(the literal string: __main__
).
This is almost always used to separate the portion of code which should be executed from the portions of code which define functionality. So Python code often contains a line like:
#!/usr/bin/env python
from __future__ import print_function
import this, that, other, stuff
class SomeObject(object):
pass
def some_function(*args,**kwargs):
pass
if __name__ == '__main__':
print("This only executes when %s is executed rather than imported" % __file__)
Using this convention one can have a file define classes and functions for use in other programs, and also include code to evaluate only when the file is called as a standalone script.
It's important to understand that all of the code above the if __name__
line is being executed, evaluated, in both cases. It's evaluated by the interpreter when the file is imported or when it's executed. If you put a print
statement before the if __name__
line then it will print output every time any other code attempts to import that as a module. (Of course, this would be anti-social. Don't do that).
I, personally, like these semantics. It encourages programmers to separate functionality (definitions) from function (execution) and encourages re-use.
Ideally almost every Python module can do something useful if called from the command line. In many cases this is used for managing unit tests. If a particular file defines functionality which is only useful in the context of other components of a system then one can still use __name__ == "__main__"
to isolate a block of code which calls a suite of unit tests that apply to this module.
(If you're not going to have any such functionality nor unit tests than it's best to ensure that the file mode is NOT executable).
Summary: if __name__ == '__main__':
has two primary use cases:
It's fairly common to def main(*args)
and have if __name__ == '__main__':
simply call main(*sys.argv[1:])
if you want to define main in a manner that's similar to some other programming languages. If your .py file is primarily intended to be used as a module in other code then you might def test_module()
and calling test_module()
in your if __name__ == '__main__:'
suite.
if __file__ == $0
).HTML and XML entities are just a way of referencing a Unicode code-point in a way that reliably works regardless of the encoding of the actual page, making them useful for using esoteric Unicode characters in a page using 7-bit ASCII or some other encoding scheme, ideally on a one-off basis. They're also used to escape the <
, >
, "
and &
characters as these are reserved in SGML.
Anyway, Unicode has a number of tick/check characters, as per Wikipedia ( http://en.wikipedia.org/wiki/Tick_(check_mark) ).
Ideally you should save/store your HTML in a Unicode format like UTF-8 or 16, thus obviating the need to use HTML entities to represent a Unicode character. Nonetheless use: ✔
✔.
✔
✔
Is using hex notation and is the same as
$#10004;
(as 2714
in base 16 is the same as 10004
in base 10)
Its late, but may help someone in future.
To get content URI for a file, you may use the following method:
FileProvider.getUriForFile(Context context, String authority, File file)
It returns the content URI.
It usually works when you change the directory name, where the file is. It worked for me when I moved it from "js/" to "../js"
You need to create a new Font
mainForm.lblName.Font = new Font("Arial", mainForm.lblName.Font.Size);
thead {
position: fixed;
height: 10px; /* This is whatever height you want */
}
tbody {
position: fixed;
margin-top: 10px; /* This has to match the height of thead */
height: 300px; /* This is whatever height you want */
}
check your casing, the name is typically stored in upper case
SELECT * FROM all_source WHERE name = 'DAILY_UPDATE' ORDER BY TYPE, LINE;
i = 20
"%x" % i #=> "14"
One way would be to create an ObservableCollection (System.Collections.ObjectModel) and have your dictionary data in there. Then you should be able to bind the ObservableCollection to your ListBox.
In your XAML you should have something like this:
<ListBox ItemsSource="{Binding Path=Name_of_your_ObservableCollection" />
There is a picture show all markers' name and description, i hope it will help you.
import matplotlib.pylab as plt
markers=['.',',','o','v','^','<','>','1','2','3','4','8','s','p','P','*','h','H','+','x','X','D','d','|','_']
descriptions=['point', 'pixel', 'circle', 'triangle_down', 'triangle_up','triangle_left', 'triangle_right', 'tri_down', 'tri_up', 'tri_left','tri_right', 'octagon', 'square', 'pentagon', 'plus (filled)','star', 'hexagon1', 'hexagon2', 'plus', 'x', 'x (filled)','diamond', 'thin_diamond', 'vline', 'hline']
x=[]
y=[]
for i in range(5):
for j in range(5):
x.append(i)
y.append(j)
plt.figure()
for i,j,m,l in zip(x,y,markers,descriptions):
plt.scatter(i,j,marker=m)
plt.text(i-0.15,j+0.15,s=m+' : '+l)
plt.axis([-0.1,4.8,-0.1,4.5])
plt.tight_layout()
plt.axis('off')
plt.show()
The following code can be used:
DWORD FindProcessId(const std::wstring& processName)
{
PROCESSENTRY32 processInfo;
processInfo.dwSize = sizeof(processInfo);
HANDLE processesSnapshot = CreateToolhelp32Snapshot(TH32CS_SNAPPROCESS, NULL);
if (processesSnapshot == INVALID_HANDLE_VALUE) {
return 0;
}
Process32First(processesSnapshot, &processInfo);
if (!processName.compare(processInfo.szExeFile))
{
CloseHandle(processesSnapshot);
return processInfo.th32ProcessID;
}
while (Process32Next(processesSnapshot, &processInfo))
{
if (!processName.compare(processInfo.szExeFile))
{
CloseHandle(processesSnapshot);
return processInfo.th32ProcessID;
}
}
CloseHandle(processesSnapshot);
return 0;
}
Usage:
auto processId = FindProcessId(L"blabla.exe");
Getting a handle should be obvious, just call OpenProcess()
or similar on it.
Why do we use:
1) cin.ignore
2) cin.clear
?
Simply:
1) To ignore (extract and discard) values that we don't want on the stream
2) To clear the internal state of stream. After using cin.clear internal state is set again back to goodbit, which means that there are no 'errors'.
Long version:
If something is put on 'stream' (cin) then it must be taken from there. By 'taken' we mean 'used', 'removed', 'extracted' from stream. Stream has a flow. The data is flowing on cin like water on stream. You simply cannot stop the flow of water ;)
Look at the example:
string name; //line 1
cout << "Give me your name and surname:"<<endl;//line 2
cin >> name;//line 3
int age;//line 4
cout << "Give me your age:" <<endl;//line 5
cin >> age;//line 6
What happens if the user answers: "Arkadiusz Wlodarczyk" for first question?
Run the program to see for yourself.
You will see on console "Arkadiusz" but program won't ask you for 'age'. It will just finish immediately right after printing "Arkadiusz".
And "Wlodarczyk" is not shown. It seems like if it was gone (?)*
What happened? ;-)
Because there is a space between "Arkadiusz" and "Wlodarczyk".
"space" character between the name and surname is a sign for computer that there are two variables waiting to be extracted on 'input' stream.
The computer thinks that you are tying to send to input more than one variable. That "space" sign is a sign for him to interpret it that way.
So computer assigns "Arkadiusz" to 'name' (2) and because you put more than one string on stream (input) computer will try to assign value "Wlodarczyk" to variable 'age' (!). The user won't have a chance to put anything on the 'cin' in line 6 because that instruction was already executed(!). Why? Because there was still something left on stream. And as I said earlier stream is in a flow so everything must be removed from it as soon as possible. And the possibility came when computer saw instruction cin >> age;
Computer doesn't know that you created a variable that stores age of somebody (line 4). 'age' is merely a label. For computer 'age' could be as well called: 'afsfasgfsagasggas' and it would be the same. For him it's just a variable that he will try to assign "Wlodarczyk" to because you ordered/instructed computer to do so in line (6).
It's wrong to do so, but hey it's you who did it! It's your fault! Well, maybe user, but still...
All right all right. But how to fix it?!
Let's try to play with that example a bit before we fix it properly to learn a few more interesting things :-)
I prefer to make an approach where we understand things. Fixing something without knowledge how we did it doesn't give satisfaction, don't you think? :)
string name;
cout << "Give me your name and surname:"<<endl;
cin >> name;
int age;
cout << "Give me your age:" <<endl;
cin >> age;
cout << cin.rdstate(); //new line is here :-)
After invoking above code you will notice that the state of your stream (cin) is equal to 4 (line 7). Which means its internal state is no longer equal to goodbit. Something is messed up. It's pretty obvious, isn't it? You tried to assign string type value ("Wlodarczyk") to int type variable 'age'. Types doesn't match. It's time to inform that something is wrong. And computer does it by changing internal state of stream. It's like: "You f**** up man, fix me please. I inform you 'kindly' ;-)"
You simply cannot use 'cin' (stream) anymore. It's stuck. Like if you had put big wood logs on water stream. You must fix it before you can use it. Data (water) cannot be obtained from that stream(cin) anymore because log of wood (internal state) doesn't allow you to do so.
Oh so if there is an obstacle (wood logs) we can just remove it using tools that is made to do so?
Yes!
internal state of cin set to 4 is like an alarm that is howling and making noise.
cin.clear clears the state back to normal (goodbit). It's like if you had come and silenced the alarm. You just put it off. You know something happened so you say: "It's OK to stop making noise, I know something is wrong already, shut up (clear)".
All right let's do so! Let's use cin.clear().
Invoke below code using "Arkadiusz Wlodarczyk" as first input:
string name;
cout << "Give me your name and surname:"<<endl;
cin >> name;
int age;
cout << "Give me your age:" <<endl;
cin >> age;
cout << cin.rdstate() << endl;
cin.clear(); //new line is here :-)
cout << cin.rdstate()<< endl; //new line is here :-)
We can surely see after executing above code that the state is equal to goodbit.
Great so the problem is solved?
Invoke below code using "Arkadiusz Wlodarczyk" as first input:
string name;
cout << "Give me your name and surname:"<<endl;
cin >> name;
int age;
cout << "Give me your age:" <<endl;
cin >> age;
cout << cin.rdstate() << endl;;
cin.clear();
cout << cin.rdstate() << endl;
cin >> age;//new line is here :-)
Even tho the state is set to goodbit after line 9 the user is not asked for "age". The program stops.
WHY?!
Oh man... You've just put off alarm, what about the wood log inside a water?* Go back to text where we talked about "Wlodarczyk" how it supposedly was gone.
You need to remove "Wlodarczyk" that piece of wood from stream. Turning off alarms doesn't solve the problem at all. You've just silenced it and you think the problem is gone? ;)
So it's time for another tool:
cin.ignore can be compared to a special truck with ropes that comes and removes the wood logs that got the stream stuck. It clears the problem the user of your program created.
So could we use it even before making the alarm goes off?
Yes:
string name;
cout << "Give me your name and surname:"<< endl;
cin >> name;
cin.ignore(10000, '\n'); //time to remove "Wlodarczyk" the wood log and make the stream flow
int age;
cout << "Give me your age:" << endl;
cin >> age;
The "Wlodarczyk" is gonna be removed before making the noise in line 7.
What is 10000 and '\n'?
It says remove 10000 characters (just in case) until '\n' is met (ENTER). BTW It can be done better using numeric_limits but it's not the topic of this answer.
So the main cause of problem is gone before noise was made...
Why do we need 'clear' then?
What if someone had asked for 'give me your age' question in line 6 for example: "twenty years old" instead of writing 20?
Types doesn't match again. Computer tries to assign string to int. And alarm starts. You don't have a chance to even react on situation like that. cin.ignore won't help you in case like that.
So we must use clear in case like that:
string name;
cout << "Give me your name and surname:"<< endl;
cin >> name;
cin.ignore(10000, '\n'); //time to remove "Wlodarczyk" the wood log and make the stream flow
int age;
cout << "Give me your age:" << endl;
cin >> age;
cin.clear();
cin.ignore(10000, '\n'); //time to remove "Wlodarczyk" the wood log and make the stream flow
But should you clear the state 'just in case'?
Of course not.
If something goes wrong (cin >> age;) instruction is gonna inform you about it by returning false.
So we can use conditional statement to check if the user put wrong type on the stream
int age;
if (cin >> age) //it's gonna return false if types doesn't match
cout << "You put integer";
else
cout << "You bad boy! it was supposed to be int";
All right so we can fix our initial problem like for example that:
string name;
cout << "Give me your name and surname:"<< endl;
cin >> name;
cin.ignore(10000, '\n'); //time to remove "Wlodarczyk" the wood log and make the stream flow
int age;
cout << "Give me your age:" << endl;
if (cin >> age)
cout << "Your age is equal to:" << endl;
else
{
cin.clear();
cin.ignore(10000, '\n'); //time to remove "Wlodarczyk" the wood log and make the stream flow
cout << "Give me your age name as string I dare you";
cin >> age;
}
Of course this can be improved by for example doing what you did in question using loop while.
BONUS:
You might be wondering. What about if I wanted to get name and surname in the same line from the user? Is it even possible using cin if cin interprets each value separated by "space" as different variable?
Sure, you can do it two ways:
1)
string name, surname;
cout << "Give me your name and surname:"<< endl;
cin >> name;
cin >> surname;
cout << "Hello, " << name << " " << surname << endl;
2) or by using getline function.
getline(cin, nameOfStringVariable);
and that's how to do it:
string nameAndSurname;
cout << "Give me your name and surname:"<< endl;
getline(cin, nameAndSurname);
cout << "Hello, " << nameAndSurname << endl;
The second option might backfire you in case you use it after you use 'cin' before the getline.
Let's check it out:
a)
int age;
cout << "Give me your age:" <<endl;
cin >> age;
cout << "Your age is" << age << endl;
string nameAndSurname;
cout << "Give me your name and surname:"<< endl;
getline(cin, nameAndSurname);
cout << "Hello, " << nameAndSurname << endl;
If you put "20" as age you won't be asked for nameAndSurname.
But if you do it that way:
b)
string nameAndSurname;
cout << "Give me your name and surname:"<< endl;
getline(cin, nameAndSurname);
cout << "Hello, " << nameAndSurname << endl;
int age;
cout << "Give me your age:" <<endl;
cin >> age;
cout << "Your age is" << age << endll
everything is fine.
WHAT?!
Every time you put something on input (stream) you leave at the end white character which is ENTER ('\n') You have to somehow enter values to console. So it must happen if the data comes from user.
b) cin characteristics is that it ignores whitespace, so when you are reading in information from cin, the newline character '\n' doesn't matter. It gets ignored.
a) getline function gets the entire line up to the newline character ('\n'), and when the newline char is the first thing the getline function gets '\n', and that's all to get. You extract newline character that was left on stream by user who put "20" on stream in line 3.
So in order to fix it is to always invoke cin.ignore(); each time you use cin to get any value if you are ever going to use getline() inside your program.
So the proper code would be:
int age;
cout << "Give me your age:" <<endl;
cin >> age;
cin.ignore(); // it ignores just enter without arguments being sent. it's same as cin.ignore(1, '\n')
cout << "Your age is" << age << endl;
string nameAndSurname;
cout << "Give me your name and surname:"<< endl;
getline(cin, nameAndSurname);
cout << "Hello, " << nameAndSurname << endl;
I hope streams are more clear to you know.
Hah silence me please! :-)
I based this on @asawyer's answer. He doesn't seem to get a compile error, but some of us do. Here is a version which the C# compiler in Visual Studio 2010 will accept.
var timer = new System.Threading.Timer(
e => MyMethod(),
null,
TimeSpan.Zero,
TimeSpan.FromMinutes(5));
Pawel Sawicz .NET blog has a real good explanation and example code, explaining how to call the library;
GET:
var client = new RestClient("192.168.0.1");
var request = new RestRequest("api/item/", Method.GET);
var queryResult = client.Execute<List<Items>>(request).Data;
POST:
var client = new RestClient("http://192.168.0.1");
var request = new RestRequest("api/item/", Method.POST);
request.RequestFormat = DataFormat.Json;
request.AddBody(new Item
{
ItemName = someName,
Price = 19.99
});
client.Execute(request);
DELETE:
var item = new Item(){//body};
var client = new RestClient("http://192.168.0.1");
var request = new RestRequest("api/item/{id}", Method.DELETE);
request.AddParameter("id", idItem);
client.Execute(request)
The RestSharp GitHub page has quite an exhaustive sample halfway down the page. To get started install the RestSharp NuGet package in your project, then include the necessary namespace references in your code, then above code should work (possibly negating your need for a full example application).
I tried maximum to use the comparator with primitive type itself. At-last i concluded that there is no way to cheat the comparator.This is my implementation.
public class ArrSortComptr {
public static void main(String[] args) {
int[] array = { 3, 2, 1, 5, 8, 6 };
int[] sortedArr=SortPrimitiveInt(new intComp(),array);
System.out.println("InPut "+ Arrays.toString(array));
System.out.println("OutPut "+ Arrays.toString(sortedArr));
}
static int[] SortPrimitiveInt(Comparator<Integer> com,int ... arr)
{
Integer[] objInt=intToObject(arr);
Arrays.sort(objInt,com);
return intObjToPrimitive(objInt);
}
static Integer[] intToObject(int ... arr)
{
Integer[] a=new Integer[arr.length];
int cnt=0;
for(int val:arr)
a[cnt++]=new Integer(val);
return a;
}
static int[] intObjToPrimitive(Integer ... arr)
{
int[] a=new int[arr.length];
int cnt=0;
for(Integer val:arr)
if(val!=null)
a[cnt++]=val.intValue();
return a;
}
}
class intComp implements Comparator<Integer>
{
@Override //your comparator implementation.
public int compare(Integer o1, Integer o2) {
// TODO Auto-generated method stub
return o1.compareTo(o2);
}
}
@Roman: I can't say that this is a good example but since you asked this is what came to my mind. Suppose in an array you want to sort number's just based on their absolute value.
Integer d1=Math.abs(o1);
Integer d2=Math.abs(o2);
return d1.compareTo(d2);
Another example can be like you want to sort only numbers greater than 100.It actually depends on the situation.I can't think of any more situations.Maybe Alexandru can give more examples since he say's he want's to use a comparator for int array.
These days, many site owners are using CDN services which pulls data from CDN server. If that's your case then you are left with two options:
Create a subdomain and edit DNS by Adding a CNAME record
Don't create a subdomain but only create a CNAME record pointing back to your temporary DNS URL.
This solution only implies to pulling code from CDN which will show that it's fetching data from cdn.sitename.com but practically its pulling from your CDN host.
Exit
[construct], and intelisense will tell you which one(s) are valid in a particular place.
If you are hosting on IIS, make sure the password for the AppPool account has not changed.
If it has, then follow these steps:
Let look into a sample git repo to verify if your branch (master)
is up to date
with origin/master
.
Verify that local master is tracking origin/master:
$ git branch -vv
* master a357df1eb [origin/master] This is a commit message
More info about local master branch:
$ git show --summary
commit a357df1eb941beb5cac3601153f063dae7faf5a8 (HEAD -> master, tag: 2.8.0, origin/master, origin/HEAD)
Author: ...
Date: Tue Dec 11 14:25:52 2018 +0100
Another commit message
Verify if origin/master is on the same commit:
$ cat .git/packed-refs | grep origin/master
a357df1eb941beb5cac3601153f063dae7faf5a8 refs/remotes/origin/master
We can see the same hash around, and safe to say the branch is in consistency with the remote one, at least in the current git repo.
You use an SDK to access functionality of a library, and an API to control it.
Since you're transferring data in xml, you could also (un)marshal directly from/to pojos.
There's an example (and more info) in the jersey user guide, which I copy here:
POJO with JAXB annotations:
@XmlRootElement
public class Planet {
public int id;
public String name;
public double radius;
}
Resource:
@Path("planet")
public class Resource {
@GET
@Produces(MediaType.APPLICATION_XML)
public Planet getPlanet() {
Planet p = new Planet();
p.id = 1;
p.name = "Earth";
p.radius = 1.0;
return p;
}
@POST
@Consumes(MediaType.APPLICATION_XML)
public void setPlanet(Planet p) {
System.out.println("setPlanet " + p.name);
}
}
The xml that gets produced/consumed:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<planet>
<id>1</id>
<name>Earth</name>
<radius>1.0</radius>
</planet>
You have to add another list:
list[:0]=['foo']
I had the same issue twice, but in the second time I realized it wasn't a problem on Tomcat at all.. Try to delete the cache of your browser, refresh the page and see if the new version of the page on your server is being shown up. It worked with me.
First Solution
You can use keyboardType = 'numeric'
for numeric keyboard.
<View style={styles.container}>
<Text style={styles.textStyle}>Enter Number</Text>
<TextInput
placeholder={'Enter number here'}
style={styles.paragraph}
keyboardType="numeric"
onChangeText={value => this.onTextChanged(value)}
value={this.state.number}
/>
</View>
In first case punctuation marks are included ex:- . and -
Second Solution
Use regular expression to remove punctuation marks.
onTextChanged(value) {
// code to remove non-numeric characters from text
this.setState({ number: value.replace(/[- #*;,.<>\{\}\[\]\\\/]/gi, '') });
}
Please check snack link
You should implement the Comparator
interface.
example:
public class CustomComparator implements Comparator<CustomObject>
{
@Override
public int compare(CustomObject o1, CustomObject o2) {
return o1.getId().compareTo(o2.getId());
}
}
Then you can use the Collections classes Collections.sort()
method:
Collections.sort(list, new CustomComparator());
This is an example of using sleep
with sidekiq
require 'sidekiq'
class PlainOldRuby
include Sidekiq::Worker
def perform(how_hard="super hard", how_long=10)
sleep how_long
puts "Workin' #{how_hard}"
end
end
sleep for 10 seconds and print out "Working super hard"
.
I had a similar problem of getting a black screen appear on sliding transition from one activity to another using overridependingtransition
. and I followed the way below and it worked
1) created a noanim.xml
in anim folder
<?xml version="1.0" encoding="utf-8"?>
<translate
xmlns:android="http://schemas.android.com/apk/res/android"
android:duration="@android:integer/config_longAnimTime"
android:fromYDelta="0%p"
android:toYDelta="0%p" />
and used
overridePendingTransition(R.drawable.lefttorightanim, R.anim.noanim);
The first parameter as my original animation and second parameter which is the exit animation as my dummy animation
Without having a href
, the click will reload the current page, so you need something like this:
<a href="#" onclick="f1()">jhhghj</a>
Or prevent the scroll like this:
<a href="#" onclick="f1(); return false;">jhhghj</a>
Or return false
in your f1
function and:
<a href="#" onclick="return f1();">jhhghj</a>
....or, the unobtrusive way:
<a href="#" id="abc">jhg</a>
<a href="#" id="myLink">jhhghj</a>
<script type="text/javascript">
document.getElementById("myLink").onclick = function() {
document.getElementById("abc").href="xyz.php";
return false;
};
</script>
You have to use new operator here to instantiate. For example:
Contacts.add(new Data(name, address, contact));
I have tested the following and this does work. The answer by gordyii was close but had the multiplication of 100 in the wrong place and had some missing parenthesis.
Select Grade, (Count(Grade)* 100 / (Select Count(*) From MyTable)) as Score
From MyTable
Group By Grade
Did you override the run() method? If you overrided __init__
, did you make sure to call the base threading.Thread.__init__()
?
After starting the two threads, does the main thread continue to do work indefinitely/block/join on the child threads so that main thread execution does not end before the child threads complete their tasks?
And finally, are you getting any unhandled exceptions?
hsb.s = max != 0 ? 255 * delta / max : 0;
?
is a ternary operator. It works like an if
in conjunction with the :
!=
means not equals
So, the long form of this line would be
if (max != 0) { //if max is not zero
hsb.s = 255 * delta / max;
} else {
hsb.s = 0;
}
double r2()
{
return (rand() % 10001) / 10000.0;
}
If you're currently on the branch you want to rename:
git branch -m new_name
Or else:
git branch -m old_name new_name
You can check with:
git branch -a
As you can see, only the local name changed Now, to change the name also in the remote you must do:
git push origin :old_name
This removes the branch, then upload it with the new name:
git push origin new_name
for key in data.keys():
print key
I created a reusable Angular service to handle high quality resizing of images / canvases for anyone who's interested: https://gist.github.com/transitive-bullshit/37bac5e741eaec60e983
The service includes two solutions because they both have their own pros / cons. The lanczos convolution approach is higher quality at the cost of being slower, whereas the step-wise downscaling approach produces reasonably antialiased results and is significantly faster.
Example usage:
angular.module('demo').controller('ExampleCtrl', function (imageService) {
// EXAMPLE USAGE
// NOTE: it's bad practice to access the DOM inside a controller,
// but this is just to show the example usage.
// resize by lanczos-sinc filter
imageService.resize($('#myimg')[0], 256, 256)
.then(function (resizedImage) {
// do something with resized image
})
// resize by stepping down image size in increments of 2x
imageService.resizeStep($('#myimg')[0], 256, 256)
.then(function (resizedImage) {
// do something with resized image
})
})
I think Glyph means do something like this:
~/.local
, if it doesn't already exist.~/.bashrc
, ensure that ~/.local/bin
is on PATH
and that ~/.local
is on PYTHONPATH
.Create a file ~/.pydistutils.cfg
which contains
[install]
prefix=~/.local
It's a standard ConfigParser-format file.
Download distribute_setup.py
and run python distribute_setup.py
(no sudo
). If it complains about a non-existing site-packages
directory, create it manually:
mkdir -p ~/.local/lib/python2.7/site-packages/
Run which easy_install
to verify that it's coming from ~/.local/bin
pip install virtualenv
pip install virtualenvwrapper
~/.virtualenvs
In ~/.bashrc
add
export WORKON_HOME
source ~/.local/bin/virtualenvwrapper.sh
That's it, no use of sudo
at all and your Python environment is in ~/.local
, completely separate from the OS's Python. Disclaimer: Not sure how compatible virtualenvwrapper
is in this scenario - I couldn't test it on my system :-)
If you see that character (? U+FFFD "REPLACEMENT CHARACTER") it usually means that the text itself is encoded in some form of single byte encoding but interpreted in one of the unicode encodings (UTF8 or UTF16).
If it were the other way around it would (usually) look something like this: ä.
Probably the original encoding is ISO-8859-1, also known as Latin-1. You can check this without having to change your script: Browsers give you the option to re-interpret a page in a different encoding -- in Firefox use "View" -> "Character Encoding".
To make the browser use the correct encoding, add an HTTP header like this:
header("Content-Type: text/html; charset=ISO-8859-1");
or put the encoding in a meta tag:
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
Alternatively you could try to read from the database in another encoding (UTF-8, preferably) or convert the text with iconv()
.
I've seen this a few times and my only solution was a re-boot.
You could try using PowerShell: Get-Process devenv | kill
But if the other methods failed, this probably will too. :-(
Here is some code. It uses 2 classes (Card.java and Deck.java) to accomplish this issue, and to top it off it auto sorts it for you when you create the deck object. :)
import java.util.*;
public class deck2 {
ArrayList<Card> cards = new ArrayList<Card>();
String[] values = {"A","2","3","4","5","6","7","8","9","10","J","Q","K"};
String[] suit = {"Club", "Spade", "Diamond", "Heart"};
static boolean firstThread = true;
public deck2(){
for (int i = 0; i<suit.length; i++) {
for(int j=0; j<values.length; j++){
this.cards.add(new Card(suit[i],values[j]));
}
}
//shuffle the deck when its created
Collections.shuffle(this.cards);
}
public ArrayList<Card> getDeck(){
return cards;
}
public static void main(String[] args){
deck2 deck = new deck2();
//print out the deck.
System.out.println(deck.getDeck());
}
}
//separate class
public class Card {
private String suit;
private String value;
public Card(String suit, String value){
this.suit = suit;
this.value = value;
}
public Card(){}
public String getSuit(){
return suit;
}
public void setSuit(String suit){
this.suit = suit;
}
public String getValue(){
return value;
}
public void setValue(String value){
this.value = value;
}
public String toString(){
return "\n"+value + " of "+ suit;
}
}
you could try
if (isValid) {
document.getElementById("endTimeLabel").style.display = "none";
}else {
document.getElementById("endTimeLabel").style.display = "block";
}
alone those lines
If you are a Windows user, this is a common error when you use XAMPP
since LDAP
is not enabled by default.
You can follow this steps to make sure LDAP
works in your XAMPP
:
[Your Drive]:\xampp\php\php.ini
: In this file uncomment the following line:
extension=php_ldap.dll
Move the file: libsasl.dll
, from [Your Drive]:\xampp\php
to [Your Drive]:\xampp\apache\bin
(Note: moving the file is needed only for XAMPP prior to version: 5.6.28
)
Restart Apache.
You can now use functions of the LDAP Module!
If you use Linux:
For php5:
sudo apt-get install php5-ldap
For php7:
sudo apt-get install php7.0-ldap
If you are using the latest version of PHP you can do
sudo apt-get install php-ldap
running the above command should do the trick.
if for any reason it doesn't work check your php.ini configuration to enable ldap, remove the semicolon before extension=ldap
to uncomment, save and restart Apache
Yes, you have to loop through the hashmap, unless you implement something along the lines of what these various answers suggest. Rather than fiddling with the entrySet, I'd just get the keySet(), iterate over that set, and keep the (first) key that gets you your matching value. If you need all the keys that match that value, obviously you have to do the whole thing.
As Jonas suggests, this might already be what the containsValue method is doing, so you might just skip that test all-together, and just do the iteration every time (or maybe the compiler will already eliminate the redundancy, who knows).
Also, relative to the other answers, if your reverse map looks like
Map<Value, Set<Key>>
you can deal with non-unique key->value mappings, if you need that capability (untangling them aside). That would incorporate fine into any of the solutions people suggest here using two maps.
localStorage.username = 'blah'
If you're guaranteed to be on a modern browser. Though know your values will all be turned into strings.
Also has the handy benefit of being cached between reloads.
I needed to detect IE vs most everything else and I didn't want to depend on the UA string. I found that using es6number
with Modernizr did exactly what I wanted. I don't have much concern with this changing as I don't expect IE to ever support ES6 Number. So now I know the difference between any version of IE vs Edge/Chrome/Firefox/Opera/Safari.
More details here: http://caniuse.com/#feat=es6-number
Note that I'm not really concerned about Opera Mini false negatives. You might be.
Here is my simple solution.
Put your iframe in a div with a class called "maps" for example.
This will be the CSS for your iframe
.maps iframe { pointer-events: none }
And here is a little javascript that will set the pointer-events property of the iframe to "auto" when you hover the div element for at least 1 second (works best for me - set it to whatever you like) and clears the timeout/set it to "none" again when the mouse leaves the element.
var maptimer;
$(".maps").hover(function(){
maptimer = setTimeout(function(){
$(".maps").find("iframe").css("pointer-events", "auto");
},1000);
},function(){
clearTimeout(maptimer);
$(".maps").find("iframe").css("pointer-events", "none");
});
Cheers.
One use where I found CTE's excelled performance wise was where I needed to join a relatively complex Query on to a few tables which had a few million rows each.
I used the CTE to first select the subset based of the indexed columns to first cut these tables down to a few thousand relevant rows each and then joined the CTE to my main query. This exponentially reduced the runtime of my query.
Whilst results for the CTE are not cached and table variables might have been a better choice I really just wanted to try them out and found the fit the above scenario.
AFAIK, the browser (at least Firefox) requests every resource as soon as it parses it. If it encounters an img tag it will request that image as soon as the img tag has been parsed. And that can be even before it has received the totality of the HTML document... that is it could still be downloading the HTML document when that happens.
For Firefox, there are browser queues that apply, depending on how they are set in about:config. For example it will not attempt to download more then 8 files at once from the same server... the additional requests will be queued. I think there are per-domain limits, per proxy limits, and other stuff, which are documented on the Mozilla website and can be set in about:config. I read somewhere that IE has no such limits.
The jQuery ready event is fired as soon as the main HTML document has been downloaded and it's DOM parsed. Then the load event is fired once all linked resources (CSS, images, etc.) have been downloaded and parsed as well. It is made clear in the jQuery documentation.
If you want to control the order in which all that is loaded, I believe the most reliable way to do it is through JavaScript.
<?php
// sample array
$fruits3 = [
"iron",
1,
"ascorbic",
"potassium",
"ascorbic",
2,
"2",
"1",
];
// Let's say we are looking for the item "ascorbic", in the above array
//a PHP function matching indexOf() from JS
echo(array_search("ascorbic", $fruits3, true)); //returns "2"
// a PHP function matching lastIndexOf() from JS world
function lastIndexOf($needle, $arr)
{
return array_search($needle, array_reverse($arr, true), true);
}
echo(lastIndexOf("ascorbic", $fruits3)); //returns "4"
// so these (above) are the two ways to run a function similar to indexOf and lastIndexOf()
String
vs string
Argument of type 'String' is not assignable to parameter of type 'string'.
'string' is a primitive, but 'String' is a wrapper object.
Prefer using 'string' when possible.
String Object
// error
class SVGStorageUtils {
store: object;
constructor(store: object) {
this.store = store;
}
setData(key: String = ``, data: object) {
sessionStorage.setItem(key, JSON.stringify(data));
}
getData(key: String = ``) {
const obj = JSON.parse(sessionStorage.getItem(key));
}
}
string primitive
// ok
class SVGStorageUtils {
store: object;
constructor(store: object) {
this.store = store;
}
setData(key: string = ``, data: object) {
sessionStorage.setItem(key, JSON.stringify(data));
}
getData(key: string = ``) {
const obj = JSON.parse(sessionStorage.getItem(key));
}
}
If you want it to be dynamic, so that the value of the variable at the time of the click is used, do the following:
<script language="javascript" type="text/javascript">
var scrt_var = 10;
</script>
<a href="2.html" onclick="location.href=this.href+'?key='+scrt_var;return false;">Link</a>
Of course, that's the quick and dirty solution. You should really have a script that after DOM load adds an onclick handler to all relevant <a>
elements.
This question is ancient but..
Right after the opening body tag..
<!--[if gte IE 8]>
<div id="IE8Body">
<![endif]-->
Right before the closing body tag..
<!--[if gte IE 8]>
</div>
<![endif]-->
CSS..
#IE8Body #nav li ul {}
You could do this for all IE browsers using conditional statements, OR target ALL browsers by encapsulating all content in a div with browser name + version server-side
Tried it out. ResponseHeaders do not include status code.
If I'm not mistaken, WebClient
is capable of abstracting away multiple distinct requests in a single method call (e.g. correctly handling 100 Continue responses, redirects, and the like). I suspect that without using HttpWebRequest
and HttpWebResponse
, a distinct status code may not be available.
It occurs to me that, if you are not interested in intermediate status codes, you can safely assume the final status code is in the 2xx (successful) range, otherwise, the call would not be successful.
The status code unfortunately isn't present in the ResponseHeaders
dictionary.
There are only 4 kinds:
NULL
for each value in the table on the right. This means that every row from the table on the left will appear at least once in the output. A "cross join" or "cartesian join" is simply an inner join for which no join conditions have been specified, resulting in all pairs of rows being output.
Thanks to RusselH for pointing out FULL joins, which I'd omitted.
To keep it dynamic, just use:
(window as any).MyNamespace
Avoid direct references to '@@ERROR'. It's a flighty little thing that can be lost.
Declare @ErrorCode int;
... perform stuff ...
Set @ErrorCode = @@ERROR;
... other stuff ...
if @ErrorCode ......
Enhancement of Ben Brandt's answer to compensate even if the string starts with space by applying LTRIM(). Tried to edit his answer but rejected, so I am now posting it here separately.
DECLARE @test NVARCHAR(255)
SET @test = 'First Second'
SELECT SUBSTRING(LTRIM(@test),1,(CHARINDEX(' ',LTRIM(@test) + ' ')-1))
The element.style
property lets you know only the CSS properties that were defined as inline in that element (programmatically, or defined in the style attribute of the element), you should get the computed style.
Is not so easy to do it in a cross-browser way, IE has its own way, through the element.currentStyle
property, and the DOM Level 2 standard way, implemented by other browsers is through the document.defaultView.getComputedStyle
method.
The two ways have differences, for example, the IE element.currentStyle
property expect that you access the CCS property names composed of two or more words in camelCase (e.g. maxHeight
, fontSize
, backgroundColor
, etc), the standard way expects the properties with the words separated with dashes (e.g. max-height
, font-size
, background-color
, etc).
Also, the IE element.currentStyle
will return all the sizes in the unit that they were specified, (e.g. 12pt, 50%, 5em), the standard way will compute the actual size in pixels always.
I made some time ago a cross-browser function that allows you to get the computed styles in a cross-browser way:
function getStyle(el, styleProp) {
var value, defaultView = (el.ownerDocument || document).defaultView;
// W3C standard way:
if (defaultView && defaultView.getComputedStyle) {
// sanitize property name to css notation
// (hypen separated words eg. font-Size)
styleProp = styleProp.replace(/([A-Z])/g, "-$1").toLowerCase();
return defaultView.getComputedStyle(el, null).getPropertyValue(styleProp);
} else if (el.currentStyle) { // IE
// sanitize property name to camelCase
styleProp = styleProp.replace(/\-(\w)/g, function(str, letter) {
return letter.toUpperCase();
});
value = el.currentStyle[styleProp];
// convert other units to pixels on IE
if (/^\d+(em|pt|%|ex)?$/i.test(value)) {
return (function(value) {
var oldLeft = el.style.left, oldRsLeft = el.runtimeStyle.left;
el.runtimeStyle.left = el.currentStyle.left;
el.style.left = value || 0;
value = el.style.pixelLeft + "px";
el.style.left = oldLeft;
el.runtimeStyle.left = oldRsLeft;
return value;
})(value);
}
return value;
}
}
The above function is not perfect for some cases, for example for colors, the standard method will return colors in the rgb(...) notation, on IE they will return them as they were defined.
I'm currently working on an article in the subject, you can follow the changes I make to this function here.
The cut command is designed for this exact situation. It will "cut" on any delimiter and then you can specify which chunks should be output.
For instance:
echo "foo bar <foo> bla 1 2 3.4" | cut -d " " -f 6-7
Will result in output of:
2 3.4
-d sets the delimiter
-f selects the range of 'fields' to output, in this case, it's the 6th through 7th chunks of the original string. You can also specify the range as a list, such as 6,7
.
UPDATE (Jan 2020): There are many great online places to get beginner practice at Python, some which are highly engaging and/or otherwise interactive. These sites are generally more practical than the Python Challenge (http://pythonchallenge.com), which you can tackle later. (After years of experience, you can try the Python "wat" quiz). For now, it's most important to learn, practice, and have fun. Welcome to Python!
ps. BTW (by the way), your experience puts you right in the heart of the target audience of my Python book, Core Python Programming. That audience is those who know how to code in another high-level language but want to learn Python as quickly but as in-depth as possible. Reviews, philosophy, and other info at http://corepython.com
pps. The following resources were previously on the list but are no longer available.
HTML:
<a id="hidden_link" href="LinkToImage"></a>
JS:
<script type="text/javascript">
$(document).ready(function() {
$("#hidden_link").fancybox().trigger('click');
});
</script>
I know this was asked a long time ago, but there is a better way to do this now! I'm not sure if anyone will see this answer though. Obviously your imports:
import { fromEvent, Observable, Subscription } from "rxjs";
Then in your component:
resizeObservable$: Observable<Event>
resizeSubscription$: Subscription
ngOnInit() {
this.resizeObservable$ = fromEvent(window, 'resize')
this.resizeSubscription$ = this.resizeObservable$.subscribe( evt => {
console.log('event: ', evt)
})
}
Then be sure to unsubscribe on destroy!
ngOnDestroy() {
this.resizeSubscription$.unsubscribe()
}
If it's available to you, then it's difficult to think of a reason not to use the Java 5 executor framework. Calling:
ScheduledExecutorService ex = Executors.newSingleThreadScheduledExecutor();
will give you a ScheduledExecutorService
with similar functionality to Timer
(i.e. it will be single-threaded) but whose access may be slightly more scalable (under the hood, it uses concurrent structures rather than complete synchronization as with the Timer
class). Using a ScheduledExecutorService
also gives you advantages such as:
newScheduledThreadPoolExecutor()
or the ScheduledThreadPoolExecutor
class)About the only reasons for sticking to Timer
I can think of are:
Eclipse 3.4 has a Favourites section under Window->Preferences->Java->Editor->Content Assist
If you use org.junit.Assert
a lot, you might find some value to adding it there.
As described in this link http://droidista.blogspot.in/2012/04/adding-float-value-to-your-resources.html
Declare in dimen.xml
<item name="my_float_value" type="dimen" format="float">9.52</item>
Referencing from xml
@dimen/my_float_value
Referencing from java
TypedValue typedValue = new TypedValue();
getResources().getValue(R.dimen.my_float_value, typedValue, true);
float myFloatValue = typedValue.getFloat();
textarea {
width: 700px;
height: 100px;
resize: none; }
assign your required width and height for the textarea and then use. resize: none ; css property which will disable the textarea's stretchable property.
Use a regular expression, if your script implementation supports them. Something like:
myString.replace(/[^0-9]/g, '');
The with
function will let you use shorthand column references and sum
will count TRUE
results from the expression(s).
sum(with(aaa, sex==1 & group1==2))
## [1] 3
sum(with(aaa, sex==1 & group2=="A"))
## [1] 2
As @mnel pointed out, you can also do:
nrow(aaa[aaa$sex==1 & aaa$group1==2,])
## [1] 3
nrow(aaa[aaa$sex==1 & aaa$group2=="A",])
## [1] 2
The benefit of that is that you can do:
nrow(aaa)
## [1] 6
And, the behaviour matches Stata's count
almost exactly (syntax notwithstanding).
Use uintptr_t
as your integer type.
The solution by tremendows worked well for me. However , file was not getting saved in Internet Explorer 10+ also. The below code worked for me for IE browser.
var file = new Blob(([data]), { type: 'application/pdf' });
if (window.navigator.msSaveOrOpenBlob) {
navigator.msSaveBlob(file, 'fileName.pdf');
}
rem set defaults:
set filename1="c:\file1.txt"
set filename2="c:\file2.txt"
set filename3="c:\file3.txt"
rem set parameters:
IF NOT "a%1"=="a" (set filename1="%1")
IF NOT "a%2"=="a" (set filename2="%2")
IF NOT "a%3"=="a" (set filename1="%3")
echo %filename1%, %filename2%, %filename3%
Be careful with quotation characters though, you may or may not need them in your variables.