Programs & Examples On #Showdialog

1. Implement a slot in your QMainWindow where you will open your new Window,
2. Place a widget on your QMainWindow,
3. Connect a signal from this widget to a slot from the QMainWindow (for example: if the widget is a QPushButton connect the signal click() to the QMainWindow custom slot you have created).

Code example:

MainWindow.h

// ...
include "newwindow.h"
// ...
public slots:
   void openNewWindow();
// ...
private:
   NewWindow *mMyNewWindow;
// ...
}

MainWindow.cpp

// ...
   MainWindow::MainWindow()
   {
      // ...
      connect(mMyButton, SIGNAL(click()), this, SLOT(openNewWindow()));
      // ...
   }
// ...
void MainWindow::openNewWindow()
{
   mMyNewWindow = new NewWindow(); // Be sure to destroy your window somewhere
   mMyNewWindow->show();
   // ...
}

This is an example on how display a custom new window. There are a lot of ways to do this.

Using parseInt() is a bad idea mainly because it never fails. Also because some results can be unexpected, like in the case of INFINITY.
Below is the function for handling unexpected behaviour.

function cleanInt(x) {
    x = Number(x);
    return x >= 0 ? Math.floor(x) : Math.ceil(x);
}

See results of below test cases.

console.log("CleanInt: ", cleanInt('xyz'), " ParseInt: ", parseInt('xyz'));
console.log("CleanInt: ", cleanInt('123abc'), " ParseInt: ", parseInt('123abc'));
console.log("CleanInt: ", cleanInt('234'), " ParseInt: ", parseInt('234'));
console.log("CleanInt: ", cleanInt('-679'), " ParseInt: ", parseInt('-679'));
console.log("CleanInt: ", cleanInt('897.0998'), " ParseInt: ", parseInt('897.0998'));
console.log("CleanInt: ", cleanInt('Infinity'), " ParseInt: ", parseInt('Infinity'));

result:

CleanInt:  NaN  ParseInt:  NaN
CleanInt:  NaN  ParseInt:  123
CleanInt:  234  ParseInt:  234
CleanInt:  -679  ParseInt:  -679
CleanInt:  897  ParseInt:  897
CleanInt:  Infinity  ParseInt:  NaN

I keep hitting this answer. But none of them list the easiest solution for xsltproc (and probably most XSLT 1.0 processors):

1. Add the exslt strings name to the stylesheet, i.e.:

<xsl:stylesheet
  version="1.0"
  xmlns:str="http://exslt.org/strings"
  xmlns:xsl="http://www.w3.org/1999/XSL/Transform">

2. Then use it like:

<xsl:value-of select="str:replace(., ' ', '')"/>

Check the below code hope that you get your parameter

echo $this->uri->segment('3');

Just type the code and save it in .cpp format. then try "gcc filename.cpp" . This will create the object file. then try "./a.out" (This is the default object file name). If you want to know about gcc you can always try "man gcc"

UnderscoreJS and Lodash have a function called .isDate() which appears to be exactly what you need. It's worth looking at their respective implementations: Lodash isDate, UnderscoreJs

For version 2.3 this works and it will get you the socket too, it seems to me that socketIo is changing too fast and to much with to little readable documentation after using it for a while.

ioSite.of('/').in(roomId).clients((error, clients) => {
    if (error) throw error;
    for (var i=0;i<clients.length;i++) {
        clientId=clients[i];
        console.log(clientId);

        // load the socket of your namespace
        var socket=ioSite.of('/').in(roomId).connected[clientId]
        console.log(socket.constructor.name);
        console.log(socket.id);
    }
});

still this does not feel right, as I have always this feeling with socket Io somehow

Solution is:

DICT_RESERVED_KEYS = vars(dict).keys()


class SmartDict(dict):
    """
    A Dict which is accessible via attribute dot notation
    """
    def __init__(self, *args, **kwargs):
        """
        :param args: multiple dicts ({}, {}, ..)
        :param kwargs: arbitrary keys='value'

        If ``keyerror=False`` is passed then not found attributes will
        always return None.
        """
        super(SmartDict, self).__init__()
        self['__keyerror'] = kwargs.pop('keyerror', True)
        [self.update(arg) for arg in args if isinstance(arg, dict)]
        self.update(kwargs)

    def __getattr__(self, attr):
        if attr not in DICT_RESERVED_KEYS:
            if self['__keyerror']:
                return self[attr]
            else:
                return self.get(attr)
        return getattr(self, attr)

    def __setattr__(self, key, value):
        if key in DICT_RESERVED_KEYS:
            raise AttributeError("You cannot set a reserved name as attribute")
        self.__setitem__(key, value)

    def __copy__(self):
        return self.__class__(self)

    def copy(self):
        return self.__copy__()

I solved the problem. When I registered the OCX files, I ran it with the Command Window that had been executed as an administrator.

I'm no c++ guy, but you should be able to get the gist from this.

public static string Reverse(string s) {
    if (s == null || s.Length < 2) {
        return s;
    }

    int length = s.Length;
    int loop = (length >> 1) + 1;
    int j;
    char[] chars = new char[length];
    for (int i = 0; i < loop; i++) {
        j = length - i - 1;
        chars[i] = s[j];
        chars[j] = s[i];
    }
    return new string(chars);
}

Just for the sake of people who landed here for the same reason I did:

Don't use reserved keywords

I named a function in my class definition delete(), which is a reserved keyword and should not be used as a function name. Renaming it to deletion() (which also made sense semantically in my case) resolved the issue.

For a list of reserved keywords: http://en.cppreference.com/w/cpp/keyword

I quote: "Since they are used by the language, these keywords are not available for re-definition or overloading. "

System.Data.SqlClient is the .NET Framework Data Provider for SQL Server. ie .NET library for SQL Server.

I don't know where providerName=SqlServer comes from. Could you be getting this confused with the provider keyword in your connection string? (I know I was :) )

In the web.config you should have the System.Data.SqlClient as the value of the providerName attribute. It is the .NET Framework Data Provider you are using.

<connectionStrings>
   <add 
      name="LocalSqlServer" 
      connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" 
      providerName="System.Data.SqlClient"
   />
</connectionStrings>

See http://msdn.microsoft.com/en-US/library/htw9h4z3(v=VS.80).aspx

I got this error because I was trying to run

javac HelloWorld.java && java HelloWorld.class

when I should have removed .class:

javac HelloWorld.java && java HelloWorld

I think it would also be useful to point out Python's collections module that consists of many useful dictionary subclasses and wrappers that simplify the addition and modification of data types in a dictionary, specifically defaultdict:

dict subclass that calls a factory function to supply missing values

This is particularly useful if you are working with dictionaries that always consist of the same data types or structures, for example a dictionary of lists.

>>> from collections import defaultdict
>>> example = defaultdict(int)
>>> example['key'] += 1
>>> example['key']
defaultdict(<class 'int'>, {'key': 1})

If the key does not yet exist, defaultdict assigns the value given (in our case 10) as the initial value to the dictionary (often used inside loops). This operation therefore does two things: it adds a new key to a dictionary (as per question), and assigns the value if the key doesn't yet exist. With the standard dictionary, this would have raised an error as the += operation is trying to access a value that doesn't yet exist:

>>> example = dict()
>>> example['key'] += 1
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
KeyError: 'key'

Without the use of defaultdict, the amount of code to add a new element would be much greater and perhaps looks something like:

# This type of code would often be inside a loop
if 'key' not in example:
    example['key'] = 0  # add key and initial value to dict; could also be a list
example['key'] += 1  # this is implementing a counter

defaultdict can also be used with complex data types such as list and set:

>>> example = defaultdict(list)
>>> example['key'].append(1)
>>> example
defaultdict(<class 'list'>, {'key': [1]})

Adding an element automatically initialises the list.

Assuming TableA as an entity of table TableA, and TableADBEntities as DB Entity class,

1. LINQ Method

IQueryable<TableA> result;
using (var context = new TableADBEntities())
{
   result = context.TableA.Select(s => s);
}

2. LINQ-to-SQL Query

IQueryable<TableA> result;
using (var context = new TableADBEntities())
{
   var qry = from s in context.TableA
               select s;
   result = qry.Select(s => s);
}

Native SQL can also be used as:

3. Native SQL

IList<TableA> resultList;
using (var context = new TableADBEntities())
{
   resultList = context.TableA.SqlQuery("Select * from dbo.TableA").ToList();
}

Note: dbo is a default schema owner in SQL Server. One can construct a SQL SELECT query as per the database in the context.

very simple find port 5900:

sudo lsof -i :5900

then considering 59553 as PID

sudo kill 59553

if not exist "%USERPROFILE%\.qgis-custom\" (
    mkdir "%USERPROFILE%\.qgis-custom" 2>nul
    if not errorlevel 1 (
        xcopy "%OSGEO4W_ROOT%\qgisconfig" "%USERPROFILE%\.qgis-custom" /s /v /e
    )
)

You have it almost done. The logic is correct, just some little changes.

This code checks for the existence of the folder (see the ending backslash, just to differentiate a folder from a file with the same name).

If it does not exist then it is created and creation status is checked. If a file with the same name exists or you have no rights to create the folder, it will fail.

If everyting is ok, files are copied.

All paths are quoted to avoid problems with spaces.

It can be simplified (just less code, it does not mean it is better). Another option is to always try to create the folder. If there are no errors, then copy the files

mkdir "%USERPROFILE%\.qgis-custom" 2>nul 
if not errorlevel 1 (
    xcopy "%OSGEO4W_ROOT%\qgisconfig" "%USERPROFILE%\.qgis-custom" /s /v /e
)

In both code samples, files are not copied if the folder is not being created during the script execution.

EDITED - As dbenham comments, the same code can be written as a single line

md "%USERPROFILE%\.qgis-custom" 2>nul && xcopy "%OSGEO4W_ROOT%\qgisconfig" "%USERPROFILE%\.qgis-custom" /s /v /e

The code after the && will only be executed if the previous command does not set errorlevel. If mkdir fails, xcopy is not executed.

To Calculate age from Date of birth used used query like this.

'SELECT username, email, skype, avatar, TIMESTAMPDIFF(YEAR, date, CURDATE()) AS age, signup_date, gender FROM users WHERE id="'.$id.'"';


if(isset($_GET['id']))
{
    $id = intval($_GET['id']);

    $dn = mysql_query('select username, email, skype, avatar, TIMESTAMPDIFF(YEAR, date, CURDATE()) AS age, signup_date, gender from users where id="'.$id.'"');

    $dnn = mysql_fetch_array($dn);

    echo $dnn['age'];
}

Note: don't use reserved keywords column name.

In your click function, you can write:

function addMoreRows(frm) {
   rowCount ++;
   var recRow = '<p id="rowCount'+rowCount+'"><tr><td><input name="" type="text" size="17%"  maxlength="120" /></td><td><input name="" type="text"  maxlength="120" style="margin: 4px 5px 0 5px;"/></td><td><input name="" type="text" maxlength="120" style="margin: 4px 10px 0 0px;"/></td></tr> <a href="javascript:void(0);" onclick="removeRow('+rowCount+');">Delete</a></p>';
   jQuery('#addedRows').append(recRow);
}

Or follow this link: http://www.discussdesk.com/add-remove-more-rows-dynamically-using-jquery.htm

You can not "attach" a SASS/SCSS file to an HTML document.

SASS/SCSS is a CSS preprocessor that runs on the server and compiles to CSS code that your browser understands.

There are client-side alternatives to SASS that can be compiled in the browser using javascript such as LESS CSS, though I advise you compile to CSS for production use.

It's as simple as adding 2 lines of code to your HTML file.

<link rel="stylesheet/less" type="text/css" href="styles.less" />
<script src="less.js" type="text/javascript"></script>

just the query phpmyadmin prints after granting super user. hope help someone with console:

ON $.$ TO-> $=* doesnt show when you put two with a dot between them.

REVOKE ALL PRIVILEGES ON . FROM 'usr'@'localhost'; GRANT ALL PRIVILEGES ON . TO 'usr'@'localhost' REQUIRE NONE WITH GRANT OPTION MAX_QUERIES_PER_HOUR 0 MAX_CONNECTIONS_PER_HOUR 0 MAX_UPDATES_PER_HOUR 0 MAX_USER_CONNECTIONS 0;

and the reverse one, removing grant:

REVOKE ALL PRIVILEGES ON . FROM 'dos007'@'localhost'; REVOKE GRANT OPTION ON . FROM 'dos007'@'localhost'; GRANT ALL PRIVILEGES ON . TO 'dos007'@'localhost' REQUIRE NONE WITH MAX_QUERIES_PER_HOUR 0 MAX_CONNECTIONS_PER_HOUR 0 MAX_UPDATES_PER_HOUR 0 MAX_USER_CONNECTIONS 0;

checked on vagrant should be working in any mysql

Yes, although it's full of gotchas, since JPA is a bit peculiar. It's very much worth reading the documentation on injecting JPA EntityManager and EntityManagerFactory, without explicit Spring dependencies in your code:

http://static.springsource.org/spring/docs/3.0.x/spring-framework-reference/html/orm.html#orm-jpa

This allows you to either inject the EntityManagerFactory, or else inject a thread-safe, transactional proxy of an EntityManager directly. The latter makes for simpler code, but means more Spring plumbing is required.

When I asked this question, my real question was, "is there a difference between the two? Doesn't the runtime have to keep information about the array size, and so will it not be able to tell which one we mean?" This question does not appear in "related questions", so just to help out those like me, here is the answer to that: "why do we even need the delete[] operator?"

As for someone don't like gray background like academic editor, try this:

p <- p + theme_bw()
p

In regards to using extension to define data type. I noticed that MailChimp API is doing it, but I don't think this is a good idea.

GET /zzz/cars.json/1

GET /zzz/cars.xml/1

My sound like a good idea, but I think "older" approach is better - using HTTP headers

GET /xxx/cars/1
Accept: application/json

Also HTTP headers are much better for cross data type communication (if ever someone would need it)

POST /zzz/cars
Content-Type: application/xml     <--- indicates we sent XML to server
Accept: application/json          <--- indicates we want get data back in JSON format  

This help to hide and show the sidebar, and the content take place of the empty space left by the sidebar.

<div id="A">Sidebar</div>
<div id="B"><button>toggle</button>
Content here: Bla, bla, bla
</div>


//Toggle Hide/Show sidebar slowy
  $(document).ready(function(){
      $('#B').click(function(e) {
          e.preventDefault();
          $('#A').toggle('slow');
          $('#B').toggleClass('extended-panel'); 
      });
  }); 


html, body {
    margin: 0;
    padding: 0;
    border: 0;
}
#A, #B {
    position: absolute;
}
#A {
    top: 0px;
    width: 200px;
    bottom: 0px;
    background:orange;
}
#B {
    top: 0px;
    left: 200px;
    right: 0;
    bottom: 0px;
    background:green;
}

/* makes the content take place of the SIDEBAR 
   which is empty when is hided */
.extended-panel {
  left: 0px !important;
}

You need to convert your private key to PKCS8 format using following command:

openssl pkcs8 -topk8 -inform PEM -outform DER -in private_key_file  -nocrypt > pkcs8_key

After this your java program can read it.

If your keys are dynamic I would suggest deserializing directly into a DataTable:

    class SampleData
    {
        [JsonProperty(PropertyName = "items")]
        public System.Data.DataTable Items { get; set; }
    }

    public void DerializeTable()
    {
        const string json = @"{items:["
            + @"{""Name"":""AAA"",""Age"":""22"",""Job"":""PPP""},"
            + @"{""Name"":""BBB"",""Age"":""25"",""Job"":""QQQ""},"
            + @"{""Name"":""CCC"",""Age"":""38"",""Job"":""RRR""}]}";
        var sampleData = JsonConvert.DeserializeObject<SampleData>(json);
        var table = sampleData.Items;

        // write tab delimited table without knowing column names
        var line = string.Empty;
        foreach (DataColumn column in table.Columns)            
            line += column.ColumnName + "\t";                       
        Console.WriteLine(line);

        foreach (DataRow row in table.Rows)
        {
            line = string.Empty;
            foreach (DataColumn column in table.Columns)                
                line += row[column] + "\t";                                   
            Console.WriteLine(line);
        }

        // Name   Age   Job    
        // AAA    22    PPP    
        // BBB    25    QQQ    
        // CCC    38    RRR    
    }

You can determine the DataTable column names and types dynamically once deserialized.

The method which you are using is rendering login button from the Facebook Javascript code. However, you can write your own Javascript code function to mimic the functionality. Here is how to do it -

1. Create a simple anchor tag link with the image you want to show. Have a onclick method on anchor tag which would actually do the real job.

<a href="#" onclick="fb_login();"><img src="images/fb_login_awesome.jpg" border="0" alt=""></a>

2. Next, we create the Javascript function which will show the actual popup and will fetch the complete user information, if user allows. We also handle the scenario if user disallows our facebook app.

window.fbAsyncInit = function() {
    FB.init({
        appId   : 'YOUR_APP_ID',
        oauth   : true,
        status  : true, // check login status
        cookie  : true, // enable cookies to allow the server to access the session
        xfbml   : true // parse XFBML
    });

  };

function fb_login(){
    FB.login(function(response) {

        if (response.authResponse) {
            console.log('Welcome!  Fetching your information.... ');
            //console.log(response); // dump complete info
            access_token = response.authResponse.accessToken; //get access token
            user_id = response.authResponse.userID; //get FB UID

            FB.api('/me', function(response) {
                user_email = response.email; //get user email
          // you can store this data into your database             
            });

        } else {
            //user hit cancel button
            console.log('User cancelled login or did not fully authorize.');

        }
    }, {
        scope: 'public_profile,email'
    });
}
(function() {
    var e = document.createElement('script');
    e.src = document.location.protocol + '//connect.facebook.net/en_US/all.js';
    e.async = true;
    document.getElementById('fb-root').appendChild(e);
}());

3. We are done.

Please note that the above function is fully tested and works. You just need to put your facebook APP ID and it will work.

A Spring Boot with Thymeleaf solution could look like:

Lets say my context-path is /app/

In Thymeleaf you can get it via:

<script th:inline="javascript">
    /*<![CDATA[*/
        let contextPath    = /*[[@{/}]]*/
    /*]]>*/
</script>

I tried this and it totally works. The code is:

stage.getIcons().add(
   new Image(
      <yourclassname>.class.getResourceAsStream( "icon.png" ))); 

icon.png is under the same folder as the source files.

This is for the total beginner... like me:

HTML:

  <ul>
    <li>
      <a href="#"> Home </a>
    </li>
    <li>
      <a href="#Info"> Info </a>
    </li>
  </ul>

  <div ng-app="myApp" ng-controller="MainCtrl">
    <div ng-view>

    </div>
  </div>

Angular:

//Create App
var app = angular.module("myApp", ["ngRoute"]);

//Configure routes
app.config(function ($routeProvider) {
    $routeProvider
      .otherwise({ template: "<p>Coming soon</p>" })
      .when("/", {
        template: "<p>Home information</p>"
      })
      .when("/Info", {
        template: "<p>Basic information</p>"
        //templateUrl: "/content/views/Info.html"
      });
});

//Controller
app.controller('MainCtrl', function ($scope, $rootScope, $location) {
  $scope.location = $location.path();
  $rootScope.$on('$routeChangeStart', function () {
    console.log("routeChangeStart");
   //Place code here:....
   });
});

Hope this helps a total beginner like me. Here is the full working sample:

<html>_x000D_
<head>_x000D_
  <script src="https://ajax.googleapis.com/ajax/libs/angularjs/1.5.6/angular.min.js"></script>_x000D_
  <script src="https://ajax.googleapis.com/ajax/libs/angularjs/1.5.6/angular-route.min.js"></script>_x000D_
</head>_x000D_
<body>_x000D_
  <ul>_x000D_
    <li>_x000D_
      <a href="#"> Home </a>_x000D_
    </li>_x000D_
    <li>_x000D_
      <a href="#Info"> Info </a>_x000D_
    </li>_x000D_
  </ul>_x000D_
_x000D_
  <div ng-app="myApp" ng-controller="MainCtrl">_x000D_
    <div ng-view>_x000D_
_x000D_
    </div>_x000D_
  </div>_x000D_
  <script>_x000D_
//Create App_x000D_
var app = angular.module("myApp", ["ngRoute"]);_x000D_
_x000D_
//Configure routes_x000D_
app.config(function ($routeProvider) {_x000D_
    $routeProvider_x000D_
      .otherwise({ template: "<p>Coming soon</p>" })_x000D_
      .when("/", {_x000D_
        template: "<p>Home information</p>"_x000D_
      })_x000D_
      .when("/Info", {_x000D_
        template: "<p>Basic information</p>"_x000D_
        //templateUrl: "/content/views/Info.html"_x000D_
      });_x000D_
});_x000D_
_x000D_
//Controller_x000D_
app.controller('MainCtrl', function ($scope, $rootScope, $location) {_x000D_
  $scope.location = $location.path();_x000D_
  $rootScope.$on('$routeChangeStart', function () {_x000D_
    console.log("routeChangeStart");_x000D_
   //Place code here:...._x000D_
   });_x000D_
});_x000D_
  </script>_x000D_
</body>_x000D_
</html>

Here are step-by-step instructions (mostly taken from a combination of the other answers). This works even on devices that are not rooted.

1. Connect your device and launch the application in debug mode.

2. You may want to use adb -d shell "run-as com.yourpackge.name ls /data/data/com.yourpackge.name/databases/" to see what the database filename is.

Notice: com.yourpackge.name is your application package name. You can get it from the manifest file.

3. Copy the database file from your application folder to your SD card.

   adb -d shell "run-as com.yourpackge.name cat /data/data/com.yourpackge.name/databases/filename.sqlite > /sdcard/filename.sqlite"

Notice: filename.sqlite is your database name you used when you created the database

4. Pull the database files to your machine:

   adb pull /sdcard/filename.sqlite

This will copy the database from the SD card to the place where your ADB exist.

5. Install Firefox SQLite Manager: https://addons.mozilla.org/en-US/firefox/addon/sqlite-manager/

6. Open Firefox SQLite Manager (Tools->SQLite Manager) and open your database file from step 3 above.

7. Enjoy!

Here is an example that works on Chrome 5.0.375.125.

The page B (iframe content):

<html>
    <head></head>
    <body>
        <script>
            top.postMessage('hello', 'A');
        </script>
    </body>
</html>

Note the use of top.postMessage or parent.postMessage not window.postMessage here

The page A:

<html>
<head></head>
<body>
    <iframe src="B"></iframe>
    <script>
        window.addEventListener( "message",
          function (e) {
                if(e.origin !== 'B'){ return; } 
                alert(e.data);
          },
          false);
    </script>
</body>
</html>

A and B must be something like http://domain.com

EDIT:

From another question, it looks the domains(A and B here) must have a / for the postMessage to work properly.

from bower help, save option has a capital S

-S, --save  Save installed packages into the project's bower.json dependencies

In case you want to initialize a fixed array of pre-initialized equal (non-null or other than default) elements, use this:

var array = Enumerable.Repeat(string.Empty, 37).ToArray();

Also please take part in this discussion.

We declare a variable 'a'

SET **@a** = (SELECT MAX( customer_id ) FROM customers) +1;

INSERT INTO customers
  ( customer_id, firstname, surname )
VALUES 
  (**@a**, 'jim', 'sock')

it will helps you use your object instant of the frame

frame.setExtendedState(JFrame.MAXIMIZED_BOTH);

Rather than changing ${user} in eclipse, it is advisable to introduce

-Duser.name=Whateverpleaseyou

in eclipse.ini which is present in your eclipse folder.

easier & shorter via indirect: INDIRECT("'..\..\..\..\Supply\SU\SU.ods'#$Data.$A$2:$AC$200")

however indirect() has performance drawbacks if lot of links in workbook

I miss construct like: ['../Data.ods']#Sheet1.A1 in LibreOffice. The intention is here: if I create a bunch of master workbooks and depending report workbooks in limited subtree of directories in source file system, I can zip whole directory subtree with complete package of workbooks and send it to other cooperating person per Email or so. It will be saved in some other absolute pazth on target system, but linkage works again in new absolute path because it was coded relatively to subtree root.

You have to configure the port first for example 127.0.0.1:91 then you need to allow access to port 91 from windows firewall->>advance setting->>inbound rules->> new rule. then check port->> assign new port (91). then next to finished. After this 127.0.0.1:91 should be accessible from the web.

I prefer to convert the map to a JSON string it is:

• a standard
• human readable
• supported in editors like Sublime, VS Code, with syntax highlighting, formatting and section hide/show
• supports JPath so editors can report exactly which part of the object you have navigated to

• supports nested complex types within the object

  import com.fasterxml.jackson.core.JsonProcessingException;
  import com.fasterxml.jackson.databind.ObjectMapper;
  
  public static String getAsFormattedJsonString(Object object)
  {
      ObjectMapper mapper = new ObjectMapper();
      try
      {
          return mapper.writerWithDefaultPrettyPrinter().writeValueAsString(object);
      }
      catch (JsonProcessingException e)
      {
          e.printStackTrace();
      }
      return "";
  }
  

I have tested both Jackson and BeanUtils and found out that BeanUtils is much faster.
In my machine(Windows8.1 , JDK1.7) I got this result.

BeanUtils t2-t1 = 286
Jackson t2-t1 = 2203

public class MainMapToPOJO {

public static final int LOOP_MAX_COUNT = 1000;

public static void main(String[] args) {
    Map<String, Object> map = new HashMap<>();
    map.put("success", true);
    map.put("data", "testString");

    runBeanUtilsPopulate(map);

    runJacksonMapper(map);
}

private static void runBeanUtilsPopulate(Map<String, Object> map) {
    long t1 = System.currentTimeMillis();
    for (int i = 0; i < LOOP_MAX_COUNT; i++) {
        try {
            TestClass bean = new TestClass();
            BeanUtils.populate(bean, map);
        } catch (IllegalAccessException e) {
            e.printStackTrace();
        } catch (InvocationTargetException e) {
            e.printStackTrace();
        }
    }
    long t2 = System.currentTimeMillis();
    System.out.println("BeanUtils t2-t1 = " + String.valueOf(t2 - t1));
}

private static void runJacksonMapper(Map<String, Object> map) {
    long t1 = System.currentTimeMillis();
    for (int i = 0; i < LOOP_MAX_COUNT; i++) {
        ObjectMapper mapper = new ObjectMapper();
        TestClass testClass = mapper.convertValue(map, TestClass.class);
    }
    long t2 = System.currentTimeMillis();
    System.out.println("Jackson t2-t1 = " + String.valueOf(t2 - t1));
}}

According to their documentation:

An Intent is an object that provides runtime binding between separate components (such as two activities). The Intent represents an app’s "intent to do something." You can use intents for a wide variety of tasks, but most often they’re used to start another activity.

Here is the link with example: http://developer.android.com/training/basics/firstapp/starting-activity.html#BuildIntent

As the document describes, in order to start an activity (you also need to understand what activity is) use the intent like below

/** Called when the user clicks the Send button */
public void sendMessage(View view) {
    Intent intent = new Intent(this, DisplayMessageActivity.class);
    EditText editText = (EditText) findViewById(R.id.edit_message);
    String message = editText.getText().toString();
    intent.putExtra(EXTRA_MESSAGE, message);
    startActivity(intent);
}

1) Use multiple classes inside the class attribute, separated by whitespace (ref):

<a class="c1 c2">aa</a>

2) To target elements that contain all of the specified classes, use this CSS selector (no space) (ref):

.c1.c2 {
}

No, there is no way to comment a line in XML and have the comment end automatically on a linebreak.

XML has only one definition for a comment:

'<!--' ((Char - '-') | ('-' (Char - '-')))* '-->'

XML forbids -- in comments to maintain compatibility with SGML.

$str = str_replace('\\', '/', $str);

This is not really 'slick' but it's faster to do integer operations than to do string concatenations for each padding 0.

function ZeroPadNumber ( nValue )
{
    if ( nValue < 10 )
    {
        return ( '000' + nValue.toString () );
    }
    else if ( nValue < 100 )
    {
        return ( '00' + nValue.toString () );
    }
    else if ( nValue < 1000 )
    {
        return ( '0' + nValue.toString () );
    }
    else
    {
        return ( nValue );
    }
}

This function is also hardcoded to your particular need (4 digit padding), so it's not generic.

Running as an admin works for me:

1.search cmd in windows

2.right click on cmd select as "Run as administrator"

3.netstat -ano | findstr :8080

4.taskkill/pid (your number) /F

export enum PaymentType {
                Cash = 1,
                Credit = 2
            }
var paymentType = PaymentType[PaymentType.Cash];

For me this is what I use if adding \n is not a problem.

fmt.Sprintf("Hello World\nHow are you doing today\nHope all is well with your go\nAnd code")

Else you can use the raw string

multiline := `Hello Brothers and sisters of the Code
              The grail needs us.
             `

Use "\n":

file.write("My String\n")

See the Python manual for reference.

I was having the exact same issue. The problem that I was having is that I hadn't saved the .plt file that I was typing into yet. The fix: I saved the .plt file in the same directory as the data that I was trying to plot and suddenly it worked! If they are in the same directory, you don't even need to specify a path, you can just put in the file name.

Below is exactly what was happening to me, and how I fixed it. The first line shows the problem we were both having. I saved in the second line, and the third line worked!

gnuplot> plot 'c:/Documents and Settings/User/Desktop/data.dat'
         warning: Skipping unreadable file c:/Documents and Settings/User/Desktop/data.dat
         No data in plot

gnuplot> save 'c:/Documents and Settings/User/Desktop/myfile.plt'

gnuplot> plot 'c:/Documents and Settings/User/Desktop/data.dat'

The best way to do this is to have your files zipped and link to that:

The other solution can be found here: How to make a link open multiple pages when clicked

Which states the following:

HTML:

<a href="#" class="yourlink">Download</a>

JS:

$('a.yourlink').click(function(e) {
    e.preventDefault();
    window.open('mysite.com/file1');
    window.open('mysite.com/file2');
    window.open('mysite.com/file3');
});

Having said this, I would still go with zipping the file, as this implementation requires JavaScript and can also sometimes be blocked as popups.

The Set statement is only used for object variables (like Range, Cell or Worksheet in Excel), while the simple equal sign '=' is used for elementary datatypes like Integer. You can find a good explanation for when to use set here.

The other problem is, that your variable g1val isn't actually declared as Integer, but has the type Variant. This is because the Dim statement doesn't work the way you would expect it, here (see example below). The variable has to be followed by its type right away, otherwise its type will default to Variant. You can only shorten your Dim statement this way:

Dim intColumn As Integer, intRow As Integer  'This creates two integers

For this reason, you will see the "Empty" instead of the expected "0" in the Watches window.

Try this example to understand the difference:

Sub Dimming()

  Dim thisBecomesVariant, thisIsAnInteger As Integer
  Dim integerOne As Integer, integerTwo As Integer

  MsgBox TypeName(thisBecomesVariant)  'Will display "Empty"
  MsgBox TypeName(thisIsAnInteger )  'Will display "Integer"
  MsgBox TypeName(integerOne )  'Will display "Integer"
  MsgBox TypeName(integerTwo )  'Will display "Integer"

  'By assigning an Integer value to a Variant it becomes Integer, too
  thisBecomesVariant = 0
  MsgBox TypeName(thisBecomesVariant)  'Will display "Integer"

End Sub

Two further notices on your code:

First remark: Instead of writing

'If g1val is bigger than the value in the current cell
If g1val > Cells(33, i).Value Then
  g1val = g1val   'Don't change g1val
Else
  g1val = Cells(33, i).Value  'Otherwise set g1val to the cell's value
End If

you could simply write

'If g1val is smaller or equal than the value in the current cell
If g1val <= Cells(33, i).Value Then
  g1val = Cells(33, i).Value  'Set g1val to the cell's value 
End If

Since you don't want to change g1val in the other case.

Second remark: I encourage you to use Option Explicit when programming, to prevent typos in your program. You will then have to declare all variables and the compiler will give you a warning if a variable is unknown.

You haven't at time of writing described what you are going to do with the response or what its content type is. An answer already contains a very basic usage of MSXML2.XMLHTTP (I recommend the more explicit MSXML2.XMLHTTP.3.0 progID) however you may need to do different things with the response, it may not be text.

The XMLHTTP also has a responseBody property which is a byte array version of the reponse and there is a responseStream which is an IStream wrapper for the response.

Note that in a server-side requirement (e.g., VBScript hosted in ASP) you would use MSXML.ServerXMLHTTP.3.0 or WinHttp.WinHttpRequest.5.1 (which has a near identical interface).

Here is an example of using XmlHttp to fetch a PDF file and store it:-

Dim oXMLHTTP
Dim oStream

Set oXMLHTTP = CreateObject("MSXML2.XMLHTTP.3.0")

oXMLHTTP.Open "GET", "http://someserver/folder/file.pdf", False
oXMLHTTP.Send

If oXMLHTTP.Status = 200 Then
    Set oStream = CreateObject("ADODB.Stream")
    oStream.Open
    oStream.Type = 1
    oStream.Write oXMLHTTP.responseBody
    oStream.SaveToFile "c:\somefolder\file.pdf"
    oStream.Close
End If

I couldn't find a simple example about the differences between ES6 and ES5, so I made one. Both code samples create exactly the same object. But the ES5 example also works in older browsers (like IE11), wheres the ES6 example doesn't.

ES6

var matrix = {};
var a = 'one';
var b = 'two';
var c = 'three';
var d = 'four';

matrix[a] = {[b]: {[c]: d}};

ES5

var matrix = {};
var a = 'one';
var b = 'two';
var c = 'three';
var d = 'four';

function addObj(obj, key, value) {
  obj[key] = value;
  return obj;
}

matrix[a] = addObj({}, b, addObj({}, c, d));

You need the correct argument for the nth-child pseudo class.

• The argument should be in the form of an + b to match every a^th child starting from b.

• Both a and b are optional integers and both can be zero or negative.

  • If a is zero then there is no "every a^th child" clause.
  • If a is negative then matching is done backwards starting from b.
  • If b is zero or negative then it is possible to write equivalent expression using positive b e.g. 4n+0 is same as 4n+4. Likewise 4n-1 is same as 4n+3.

Examples:

Select every 4th child (4, 8, 12, ...)

li:nth-child(4n) {_x000D_
  background: yellow;_x000D_
}

<ol>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
</ol>

Select every 4th child starting from 1 (1, 5, 9, ...)

li:nth-child(4n+1) {_x000D_
  background: yellow;_x000D_
}

<ol>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
</ol>

Select every 3rd and 4th child from groups of 4 (3 and 4, 7 and 8, 11 and 12, ...)

/* two selectors are required */_x000D_
li:nth-child(4n+3),_x000D_
li:nth-child(4n+4) {_x000D_
  background: yellow;_x000D_
}

<ol>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
</ol>

Select first 4 items (4, 3, 2, 1)

/* when a is negative then matching is done backwards  */_x000D_
li:nth-child(-n+4) {_x000D_
  background: yellow;_x000D_
}

<ol>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
  <li>Item</li>_x000D_
</ol>

Uilabel code 

var label: UILabel = UILabel()
label.frame = CGRectMake(50, 50, 200, 21)
label.backgroundColor = UIColor.blackColor()
label.textColor = UIColor.whiteColor()
label.textAlignment = NSTextAlignment.Center
label.text = "test label"
self.view.addSubview(label)

It's because you're missing position:relative; on #contentframe

<div id="contentframe" style="position:relative; top: 160px; left: 0px;">

position:absolute; positions itself against the closest ancestor that has a position that is not static. Since the default is static that is what was causing your issue.

Looks like the script executes before the DOM loads. Try loading the script asynchronously.

 <script src="yourcode.js" async></script>

I've searched a lot and the best way I've found so far is on this article:

Class to serialize

package net.sghill.example;

import net.sghill.example.UserDeserializer
import net.sghill.example.UserSerializer
import org.codehaus.jackson.map.annotate.JsonDeserialize;
import org.codehaus.jackson.map.annotate.JsonSerialize;

@JsonDeserialize(using = UserDeserializer.class)
public class User {
    private ObjectId id;
    private String   username;
    private String   password;

    public User(ObjectId id, String username, String password) {
        this.id = id;
        this.username = username;
        this.password = password;
    }

    public ObjectId getId()       { return id; }
    public String   getUsername() { return username; }
    public String   getPassword() { return password; }
}

Deserializer class

package net.sghill.example;

import net.sghill.example.User;
import org.codehaus.jackson.JsonNode;
import org.codehaus.jackson.JsonParser;
import org.codehaus.jackson.ObjectCodec;
import org.codehaus.jackson.map.DeserializationContext;
import org.codehaus.jackson.map.JsonDeserializer;

import java.io.IOException;

public class UserDeserializer extends JsonDeserializer<User> {

    @Override
    public User deserialize(JsonParser jsonParser, DeserializationContext deserializationContext) throws IOException {
        ObjectCodec oc = jsonParser.getCodec();
        JsonNode node = oc.readTree(jsonParser);
        return new User(null, node.get("username").getTextValue(), node.get("password").getTextValue());
    }
}

Edit: Alternatively you can look at this article which uses new versions of com.fasterxml.jackson.databind.JsonDeserializer.

A simple technique is to put this somewhere in your index:

<div class="font_preload" style="opacity: 0">
    <span style="font-family: 'myfontface#1font-family', Arial, sans-serif;"></span>
    <span style="font-family: 'myfontface#2font-family', Arial, sans-serif;"></span>
    ...
</div>

Tested on Chrome 34, Safari 7 and FF 29 and IE 11

<input type="checkbox" checked onclick="return false;" onkeydown="return false;"/>

http://jsfiddle.net/2srjc/

If you are worried about tab order, only return false for the keydown event when the tab key was not pressed:

<input type="checkbox" checked onclick="return false;" onkeydown="e = e || window.event; if(e.keyCode !== 9) return false;"/>

http://jsfiddle.net/2srjc/149/

It means that you should not share an iterator object among multiple threads. Creating multiple iterators and using them concurrently in separate threads is fine.

I searched for hours, and I tried almost everything suggested.
This worked for almost every entity :

$input = "ažškunrukiš ? àéò ??? ©€ ?? ? ?? ? R?";


echo htmlentities($input, ENT_HTML5  , 'UTF-8');

result :

āžšķūņrūķīš ○ àéò ∀∂∋ ©€ ♣♦ ↠ ↔↛ ↙ ℜ℞rx;

Well I just pulled up the Wikipedia page on it too, and in the intro portion I saw "Unicode can be implemented by different character encodings. The most commonly used encodings are UTF-8 (which uses one byte for any ASCII characters, which have the same code values in both UTF-8 and ASCII encoding, and up to four bytes for other characters), the now-obsolete UCS-2 (which uses two bytes for each character but cannot encode every character in the current Unicode standard)"

As this quote demonstrates, your problem is that you are assuming Unicode is a single way of encoding characters. There are actually multiple forms of Unicode, and, again in that quote, one of them even has 1 byte per character just like what you are used to.

So your simple answer that you want is that it varies.

I was getting this error because of the new Google Universal Analytics code, particularly caused by using the Remarketing lists on Analytics.

Here's how I fixed it.
1) Log into Google Analytics
2) Click "Admin" in top menu
3) In "Property" column, click "Property Settings"
4) Make sure "Enable Display Advertiser Features" is "On"
5) Click "Save" at bottom
6) Click ".js Tracking Info" in left menu
7) Click "Tracking Code"
8) Update your website's tracking code


When you run the debugger again, hopefully it will be taken care of.

<a href="delete.php?id=22" onclick = "if (! confirm('Continue?')) { return false; }">Confirm OK, then goto URL (uses onclick())</a>

You will certainly have to use both STR_TO_DATE to convert your date to a MySQL standard date format, and UNIX_TIMESTAMP to get the timestamp from it.

Given the format of your date, something like

UNIX_TIMESTAMP(STR_TO_DATE(Sales.SalesDate, '%M %e %Y %h:%i%p'))

Will gives you a valid timestamp. Look the STR_TO_DATE documentation to have more information on the format string.

Copy "libgcc_s_dw2-1.dll" to were make.exe is. (If you are using Msys, copy it to \msys\bin) Make sure that the path to make.exe is set in the env. PATH (if make.exe is in a folder "bin", most likely, and you have msys, it's \msys\bin) Compile, rund, debug, etc. happy.

If you are using CSRF enter 'before'=>'csrf'

In your case Route::get('auth/login', ['before'=>'csrf','uses' => 'Auth\AuthController@getLogin', 'as' => 'login']);

For more details view Laravel 5 Documentation Security Protecting Routes

If you have a complicated folder structure, such as

- Your application
     - assets
         - images
             - profile.jpg
     - web
     - server
        - index.js

If you want to serve assets/images from index.js

app.use('/images', express.static(path.join(__dirname, '..', 'assets', 'images')))

To view from your browser

http://localhost:4000/images/profile.jpg

If you need more clarification comment, I'll elaborate.

This standard library solution likely has not been mentioned because the question is so dated. While these answers may scale to the other use cases beyond currency where differing levels of decimals are required, it seems you need it for currency.

I recommend you use the standard library locale.currency object. It seems to have been created to address this problem of currency representation.

import locale
locale.setlocale(locale.LC_ALL, 'en_US.UTF-8')

locale.currency(1.23)
>>>'$1.23'
locale.currency(1.53251)
>>>'$1.23'
locale.currency(1)
>>>'$1.00'

locale.currency(mealPrice)

Currency generalizes to other countries as well.

the answer is when you load the file, you need apply the "close" method, in any line of code, works to me

The push() method adds new items to the end of an array, and returns the new length. Example:

var fruits = ["Banana", "Orange", "Apple", "Mango"];
fruits.push("Kiwi");

// The result of fruits will be:
Banana, Orange, Apple, Mango, Kiwi

The exact answer to your question is already answered, but let's look at some other ways to add items to an array.

The unshift() method adds new items to the beginning of an array, and returns the new length. Example:

var fruits = ["Banana", "Orange", "Apple", "Mango"];
fruits.unshift("Lemon", "Pineapple");

// The result of fruits will be:
Lemon, Pineapple, Banana, Orange, Apple, Mango

And lastly, the concat() method is used to join two or more arrays. Example:

var fruits = ["Banana", "Orange"];
var moreFruits = ["Apple", "Mango", "Lemon"];
var allFruits = fruits.concat(moreFruits);

// The values of the children array will be:
Banana, Orange, Apple, Mango, Lemon

If you are having any one or more row(s) with less or more number of columns than 2 in the dataset then this error may arise.

I am also new to Pyspark and trying to read CSV file. Following code worked for me:

In this code I am using dataset from kaggle the link is: https://www.kaggle.com/carrie1/ecommerce-data

1. Without mentioning the schema:

from pyspark.sql import SparkSession  
scSpark = SparkSession \
    .builder \
    .appName("Python Spark SQL basic example: Reading CSV file without mentioning schema") \
    .config("spark.some.config.option", "some-value") \
    .getOrCreate()

sdfData = scSpark.read.csv("data.csv", header=True, sep=",")
sdfData.show()

Now check the columns: sdfData.columns

Output will be:

['InvoiceNo', 'StockCode','Description','Quantity', 'InvoiceDate', 'CustomerID', 'Country']

Check the datatype for each column:

sdfData.schema
StructType(List(StructField(InvoiceNo,StringType,true),StructField(StockCode,StringType,true),StructField(Description,StringType,true),StructField(Quantity,StringType,true),StructField(InvoiceDate,StringType,true),StructField(UnitPrice,StringType,true),StructField(CustomerID,StringType,true),StructField(Country,StringType,true)))

This will give the data frame with all the columns with datatype as StringType

2. With schema: If you know the schema or want to change the datatype of any column in the above table then use this (let's say I am having following columns and want them in a particular data type for each of them)

from pyspark.sql import SparkSession  
from pyspark.sql.types import StructType, StructField
from pyspark.sql.types import DoubleType, IntegerType, StringType
    schema = StructType([\
        StructField("InvoiceNo", IntegerType()),\
        StructField("StockCode", StringType()), \
        StructField("Description", StringType()),\
        StructField("Quantity", IntegerType()),\
        StructField("InvoiceDate", StringType()),\
        StructField("CustomerID", DoubleType()),\
        StructField("Country", StringType())\
    ])

scSpark = SparkSession \
    .builder \
    .appName("Python Spark SQL example: Reading CSV file with schema") \
    .config("spark.some.config.option", "some-value") \
    .getOrCreate()

sdfData = scSpark.read.csv("data.csv", header=True, sep=",", schema=schema)

Now check the schema for datatype of each column:

sdfData.schema

StructType(List(StructField(InvoiceNo,IntegerType,true),StructField(StockCode,StringType,true),StructField(Description,StringType,true),StructField(Quantity,IntegerType,true),StructField(InvoiceDate,StringType,true),StructField(CustomerID,DoubleType,true),StructField(Country,StringType,true)))

Edited: We can use the following line of code as well without mentioning schema explicitly:

sdfData = scSpark.read.csv("data.csv", header=True, inferSchema = True)
sdfData.schema

The output is:

StructType(List(StructField(InvoiceNo,StringType,true),StructField(StockCode,StringType,true),StructField(Description,StringType,true),StructField(Quantity,IntegerType,true),StructField(InvoiceDate,StringType,true),StructField(UnitPrice,DoubleType,true),StructField(CustomerID,IntegerType,true),StructField(Country,StringType,true)))

The output will look like this:

sdfData.show()

+---------+---------+--------------------+--------+--------------+----------+-------+
|InvoiceNo|StockCode|         Description|Quantity|   InvoiceDate|CustomerID|Country|
+---------+---------+--------------------+--------+--------------+----------+-------+
|   536365|   85123A|WHITE HANGING HEA...|       6|12/1/2010 8:26|      2.55|  17850|
|   536365|    71053| WHITE METAL LANTERN|       6|12/1/2010 8:26|      3.39|  17850|
|   536365|   84406B|CREAM CUPID HEART...|       8|12/1/2010 8:26|      2.75|  17850|
|   536365|   84029G|KNITTED UNION FLA...|       6|12/1/2010 8:26|      3.39|  17850|
|   536365|   84029E|RED WOOLLY HOTTIE...|       6|12/1/2010 8:26|      3.39|  17850|
|   536365|    22752|SET 7 BABUSHKA NE...|       2|12/1/2010 8:26|      7.65|  17850|
|   536365|    21730|GLASS STAR FROSTE...|       6|12/1/2010 8:26|      4.25|  17850|
|   536366|    22633|HAND WARMER UNION...|       6|12/1/2010 8:28|      1.85|  17850|
|   536366|    22632|HAND WARMER RED P...|       6|12/1/2010 8:28|      1.85|  17850|
|   536367|    84879|ASSORTED COLOUR B...|      32|12/1/2010 8:34|      1.69|  13047|
|   536367|    22745|POPPY'S PLAYHOUSE...|       6|12/1/2010 8:34|       2.1|  13047|
|   536367|    22748|POPPY'S PLAYHOUSE...|       6|12/1/2010 8:34|       2.1|  13047|
|   536367|    22749|FELTCRAFT PRINCES...|       8|12/1/2010 8:34|      3.75|  13047|
|   536367|    22310|IVORY KNITTED MUG...|       6|12/1/2010 8:34|      1.65|  13047|
|   536367|    84969|BOX OF 6 ASSORTED...|       6|12/1/2010 8:34|      4.25|  13047|
|   536367|    22623|BOX OF VINTAGE JI...|       3|12/1/2010 8:34|      4.95|  13047|
|   536367|    22622|BOX OF VINTAGE AL...|       2|12/1/2010 8:34|      9.95|  13047|
|   536367|    21754|HOME BUILDING BLO...|       3|12/1/2010 8:34|      5.95|  13047|
|   536367|    21755|LOVE BUILDING BLO...|       3|12/1/2010 8:34|      5.95|  13047|
|   536367|    21777|RECIPE BOX WITH M...|       4|12/1/2010 8:34|      7.95|  13047|
+---------+---------+--------------------+--------+--------------+----------+-------+
only showing top 20 rows

In general, you want to go from XML to regular objects of your language (since there are usually reasonable tools to do this, and it's the harder conversion). And then from Plain Old Object produce JSON -- there are tools for this, too, and it's a quite simple serialization (since JSON is "Object Notation", natural fit for serializing objects). I assume Python has its set of tools.

I thought I would add another possibility. One of the things you can do is you can connect two scenes in a storyboard using a segue that is not attached to an action, and then programmatically trigger the segue inside your view controller. The way you do this, is that you have to drag from the file's owner icon at the bottom of the storyboard scene that is the segueing scene, and right drag to the destination scene. I'll throw in an image to help explain.

A popup will show for "Manual Segue". I picked Push as the type. Tap on the little square and make sure you're in the attributes inspector. Give it an identifier which you will use to refer to it in code.

Ok, next I'm going to segue using a programmatic bar button item. In viewDidLoad or somewhere else I'll create a button item on the navigation bar with this code:

UIBarButtonItem *buttonizeButton = [[UIBarButtonItem alloc] initWithTitle:@"Buttonize"
                                                                    style:UIBarButtonItemStyleDone
                                                                   target:self
                                                                   action:@selector(buttonizeButtonTap:)];
self.navigationItem.rightBarButtonItems = @[buttonizeButton];

Ok, notice that the selector is buttonizeButtonTap:. So write a void method for that button and within that method you will call the segue like this:

-(void)buttonizeButtonTap:(id)sender{
    [self performSegueWithIdentifier:@"Associate" sender:sender];
    }

The sender parameter is required to identify the button when prepareForSegue is called. prepareForSegue is the framework method where you will instantiate your scene and pass it whatever values it will need to do its work. Here's what my method looks like:

- (void)prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender
{
    if ([[segue identifier] isEqualToString:@"Associate"])
    {
        TranslationQuizAssociateVC *translationQuizAssociateVC = [segue destinationViewController];
        translationQuizAssociateVC.nodeID = self.nodeID; //--pass nodeID from ViewNodeViewController
        translationQuizAssociateVC.contentID = self.contentID;
        translationQuizAssociateVC.index = self.index;
        translationQuizAssociateVC.content = self.content;
    }
}

Ok, just tested it and it works. Hope it helps you.

You can also do this with awk, using -v to provide the pattern:

awk -v patt="pattern" '$0 ~ patt {gsub(patt, "\n"patt)}1' file

This checks if a line contains a given pattern. If so, it appends a new line to the beginning of it.

See a basic example:

$ cat file
hello
this is some pattern and we are going ahead
bye!
$ awk -v patt="pattern" '$0 ~ patt {gsub(patt, "\n"patt)}1' file
hello
this is some 
pattern and we are going ahead
bye!

Note it will affect to all patterns in a line:

$ cat file
this pattern is some pattern and we are going ahead
$ awk -v patt="pattern" '$0 ~ patt {gsub(patt, "\n"patt)}1' d
this 
pattern is some 
pattern and we are going ahead

SELECT *
FROM sys.objects
WHERE type IN ('FN', 'IF', 'TF') 
AND name = 'dgdsgds'

I think OldCurmudgeon and StaxMan are both correct but here is one sentence answer with simple example for you.

@JsonProperty(name), tells Jackson ObjectMapper to map the JSON property name to the annotated Java field's name.

//example of json that is submitted 
"Car":{
  "Type":"Ferrari",
}

//where it gets mapped 
public static class Car {
  @JsonProperty("Type")
  public String type;
 }

Borders of different colors. I used 3 items.

<?xml version="1.0" encoding="utf-8"?>
<layer-list xmlns:android="http://schemas.android.com/apk/res/android">
    <item>
        <shape android:shape="rectangle">
            <solid android:color="@color/colorAccent" />
        </shape>
    </item>
    <item android:top="3dp">
        <shape android:shape="rectangle">
            <solid android:color="@color/light_grey" />
        </shape>
    </item>
    <item
        android:bottom="1dp"
        android:left="1dp"
        android:right="1dp"
        android:top="3dp">
        <shape android:shape="rectangle">
            <solid android:color="@color/colorPrimary" />
        </shape>
    </item>
</layer-list>

If you are passing data to a DOM element from the server, you should set the data on the element:

<a id="foo" data-foo="bar" href="#">foo!</a>

The data can then be accessed using .data() in jQuery:

console.log( $('#foo').data('foo') );
//outputs "bar"

However when you store data on a DOM node in jQuery using data, the variables are stored on the node object. This is to accommodate complex objects and references as storing the data on the node element as an attribute will only accommodate string values.

$('#foo').data('foo', 'baz');

console.log( $('#foo').attr('data-foo') );
//outputs "bar" as the attribute was never changed

console.log( $('#foo').data('foo') );
//outputs "baz" as the value has been updated on the object

Also, the naming convention for data attributes has a bit of a hidden "gotcha":

<a id="bar" data-foo-bar-baz="fizz-buzz" href="#">fizz buzz!</a>

console.log( $('#bar').data('fooBarBaz') );
//outputs "fizz-buzz" as hyphens are automatically camelCase'd

The hyphenated key will still work:

<a id="bar" data-foo-bar-baz="fizz-buzz" href="#">fizz buzz!</a>

console.log( $('#bar').data('foo-bar-baz') );
//still outputs "fizz-buzz"

However the object returned by .data() will not have the hyphenated key set:

$('#bar').data().fooBarBaz; //works
$('#bar').data()['fooBarBaz']; //works
$('#bar').data()['foo-bar-baz']; //does not work

It's for this reason I suggest avoiding the hyphenated key in javascript.

For HTML, keep using the hyphenated form. HTML attributes are supposed to get ASCII-lowercased automatically, so <div data-foobar></div>, <DIV DATA-FOOBAR></DIV>, and <dIv DaTa-FoObAr></DiV> are supposed to be treated as identical, but for the best compatibility the lower case form should be preferred.

The .data() method will also perform some basic auto-casting if the value matches a recognized pattern:

<a id="foo"
    href="#"
    data-str="bar"
    data-bool="true"
    data-num="15"
    data-json='{"fizz":["buzz"]}'>foo!</a>

$('#foo').data('str');  //`"bar"`
$('#foo').data('bool'); //`true`
$('#foo').data('num');  //`15`
$('#foo').data('json'); //`{fizz:['buzz']}`

This auto-casting ability is very convenient for instantiating widgets & plugins:

$('.widget').each(function () {
    $(this).widget($(this).data());
    //-or-
    $(this).widget($(this).data('widget'));
});

If you absolutely must have the original value as a string, then you'll need to use .attr():

<a id="foo" href="#" data-color="ABC123"></a>
<a id="bar" href="#" data-color="654321"></a>

$('#foo').data('color').length; //6
$('#bar').data('color').length; //undefined, length isn't a property of numbers

$('#foo').attr('data-color').length; //6
$('#bar').attr('data-color').length; //6

_{This was a contrived example. For storing color values, I used to use numeric hex notation (i.e. 0xABC123), but it's worth noting that hex was parsed incorrectly in jQuery versions before 1.7.2, and is no longer parsed into a Number as of jQuery 1.8 rc 1.}

jQuery 1.8 rc 1 changed the behavior of auto-casting. Before, any format that was a valid representation of a Number would be cast to Number. Now, values that are numeric are only auto-cast if their representation stays the same. This is best illustrated with an example.

<a id="foo"
    href="#"
    data-int="1000"
    data-decimal="1000.00"
    data-scientific="1e3"
    data-hex="0x03e8">foo!</a>

                              // pre 1.8    post 1.8
$('#foo').data('int');        //    1000        1000
$('#foo').data('decimal');    //    1000   "1000.00"
$('#foo').data('scientific'); //    1000       "1e3"
$('#foo').data('hex');        //    1000     "0x03e8"

If you plan on using alternative numeric syntaxes to access numeric values, be sure to cast the value to a Number first, such as with a unary + operator.

+$('#foo').data('hex'); // 1000

I was in the same situation and found this one,

WOWslider

you can pickle your dict and save as string.

import pickle
import redis

r = redis.StrictRedis('localhost')
mydict = {1:2,2:3,3:4}
p_mydict = pickle.dumps(mydict)
r.set('mydict',p_mydict)

read_dict = r.get('mydict')
yourdict = pickle.loads(read_dict)

I am adding this answer as an alternative to doing a formal checkout or some similar local operation. Assuming that you have access to the web interface of your Git provider, you might be able to directly view any file at a given desired commit. For example, on GitHub you may use something like:

https://github.com/hubotio/hubot/blob/ed25584f/src/adapter.coffee

Here ed25584f is the first 8 characters from the SHA-1 hash of the commit of interest, followed by the path to the source file.

Similary, on Bitbucket we can try:

https://bitbucket.org/cofarrell/stash-browse-code-plugin/src/06befe08

In this case, we place the commit hash at the end of the source URL.

Here's a neat trick:

// E.g pad("sss","00000000"); should deliver "00000sss".
public static String pad(String string, String pad) {
  /*
   * Add the pad to the left of string then take as many characters from the right 
   * that is the same length as the pad.
   * This would normally mean starting my substring at 
   * pad.length() + string.length() - pad.length() but obviously the pad.length()'s 
   * cancel.
   *
   * 00000000sss
   *    ^ ----- Cut before this character - pos = 8 + 3 - 8 = 3
   */
  return (pad + string).substring(string.length());
}

public static void main(String[] args) throws InterruptedException {
  try {
    System.out.println("Pad 'Hello' with '          ' produces: '"+pad("Hello","          ")+"'");
    // Prints: Pad 'Hello' with '          ' produces: '     Hello'
  } catch (Exception e) {
    e.printStackTrace();
  }
}

The hidden-* and visible-* classes no longer exist in Bootstrap 4. The same fucntion can be achieved in Bootstrap 4 by using the d-* for the specific tiers.

select 'delete from ' +TABLE_NAME from INFORMATION_SCHEMA.TABLES where TABLE_TYPE='BASE TABLE'

where result come.

Copy and paste on query window and run the command

also happens when you use jinja templates (which have different syntax for calling object methods) and you forget to set it in settings.py

To check if a character is lower case, use the islower method of str. This simple imperative program prints all the lowercase letters in your string:

for c in s:
    if c.islower():
         print c

Note that in Python 3 you should use print(c) instead of print c.

Possibly ending up with assigning those letters to a different variable.

To do this I would suggest using a list comprehension, though you may not have covered this yet in your course:

>>> s = 'abCd'
>>> lowercase_letters = [c for c in s if c.islower()]
>>> print lowercase_letters
['a', 'b', 'd']

Or to get a string you can use ''.join with a generator:

>>> lowercase_letters = ''.join(c for c in s if c.islower())
>>> print lowercase_letters
'abd'

I found this tool most useful.

1. Upload a image.
2. Download a zip.
3. Extract into your project.

Done

http://romannurik.github.io/AndroidAssetStudio/

Sticky navbar:

To make a sticky nav you need to add the class navbar-fixed-top to your nav

Official documentation:
http://getbootstrap.com/components/#navbar-fixed-top

Official example:
http://getbootstrap.com/examples/navbar-fixed-top/

A simple example code:

<nav class="navbar navbar-default navbar-fixed-top" role="navigation">
  <div class="container">
    ...
  </div>
</nav>

with related jsfiddle: http://jsfiddle.net/ur7t8/

Resize the navbar:

If you want the nav bar to resize while you scroll the page you can give a look to this example: http://www.bootply.com/109943

JS

$(window).scroll(function() {
  if ($(document).scrollTop() > 50) {
    $('nav').addClass('shrink');
  } else {
    $('nav').removeClass('shrink');
  }
});

CSS

nav.navbar.shrink {
  min-height: 35px;
}

Animation:

To add an animation while you scroll, all you need to do is set a transition on the nav

CSS

nav.navbar{
  background-color:#ccc;
   // Animation
   -webkit-transition: all 0.4s ease;
   transition: all 0.4s ease;
}

I made a jsfiddle with the full example code: http://jsfiddle.net/Filo/m7yww8oa/

so just to make it a complete answer:

login(username, password) {
        var headers = new Headers();
        headers.append('Content-Type', 'application/x-www-form-urlencoded');
        let urlSearchParams = new URLSearchParams();
        urlSearchParams.append('username', username);
        urlSearchParams.append('password', password);
        let body = urlSearchParams.toString()
        return this.http.post('http://localHost:3000/users/login', body, {headers:headers})
            .map((response: Response) => {
                // login successful if there's a jwt token in the response
                console.log(response);
                var body = response.json();
                console.log(body);
                if (body.response){
                    let user = response.json();
                    if (user && user.token) {
                        // store user details and jwt token in local storage to keep user logged in between page refreshes
                        localStorage.setItem('currentUser', JSON.stringify(user)); 
                    }
                }
                else{
                    return body;
                }
            });
    }

I had this same error while trying to include a PHP file in my Wordpress theme. I was able to get around it by referencing the file name using dirname(__FILE__). I couldn't use relative paths since my file was going to be included in different places throughout the theme, so something like require_once '../path-to/my-file' wouldn't work.

Replacing require_once get_template_directory_uri() . '/path-to/my-file' with require_once dirname( __FILE__ ) . '/path-to/my-file' did the trick.

.button:active:hover:not([disabled]) {
    /*your styles*/
}

You can try this..

You can use:

python -c "import serial.tools.list_ports;print serial.tools.list_ports.comports()"

Filter by know port: python -c "import serial.tools.list_ports;print [port for port in serial.tools.list_ports.comports() if port[2] != 'n/a']"

See more info here: https://pyserial.readthedocs.org/en/latest/tools.html#module-serial.tools.list_ports

But fortunately, with the MySQL FOREIGN_KEY_CHECKS variable, you don't have to worry about the order of your DROP TABLE statements at all, and you can write them in any order you like -- even the exact opposite -- like this:

SET FOREIGN_KEY_CHECKS = 0;
drop table if exists customers;
drop table if exists orders;
drop table if exists order_details;
SET FOREIGN_KEY_CHECKS = 1;

For more clarification, check out the link below:

http://alvinalexander.com/blog/post/mysql/drop-mysql-tables-in-any-order-foreign-keys/

Answer

You can't according to the PHP manual:

Once the cookies have been set, they can be accessed on the next page load with the $_COOKIE or $HTTP_COOKIE_VARS arrays.

This is because cookies are sent in response headers to the browser and the browser must then send them back with the next request. This is why they are only available on the second page load.

Work around

But you can work around it by also setting $_COOKIE when you call setcookie():

if(!isset($_COOKIE['lg'])) {
    setcookie('lg', 'ro');
    $_COOKIE['lg'] = 'ro';
}
echo $_COOKIE['lg'];

Take a look at the System log in Windows EventViewer (eventvwr from the command line).
You should see entries with source as 'Service Control Manager'. e.g. on my WinXP machine,

Event Type: Information
Event Source:   Service Control Manager
Event Category: None
Event ID:   7036
Date:       7/1/2009
Time:       12:09:43 PM
User:       N/A
Computer:   MyMachine
Description:
The Background Intelligent Transfer Service service entered the running state.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

You're looking for the LOOKUP function. please see the following page for more info:

Data Buckets (in a range)

A lot of C projects end up implementing a vector-like API. Dynamic arrays are such a common need, that it's nice to abstract away the memory management as much as possible. A typical C implementation might look something like:

typedef struct dynamic_array_struct
{
  int* data;
  size_t capacity; /* total capacity */
  size_t size; /* number of elements in vector */
} vector;

Then they would have various API function calls which operate on the vector:

int vector_init(vector* v, size_t init_capacity)
{
  v->data = malloc(init_capacity * sizeof(int));
  if (!v->data) return -1;

  v->size = 0;
  v->capacity = init_capacity;

  return 0; /* success */
}

Then of course, you need functions for push_back, insert, resize, etc, which would call realloc if size exceeds capacity.

vector_resize(vector* v, size_t new_size);

vector_push_back(vector* v, int element);

Usually, when a reallocation is needed, capacity is doubled to avoid reallocating all the time. This is usually the same strategy employed internally by std::vector, except typically std::vector won't call realloc because of C++ object construction/destruction. Rather, std::vector might allocate a new buffer, and then copy construct/move construct the objects (using placement new) into the new buffer.

An actual vector implementation in C might use void* pointers as elements rather than int, so the code is more generic. Anyway, this sort of thing is implemented in a lot of C projects. See http://codingrecipes.com/implementation-of-a-vector-data-structure-in-c for an example vector implementation in C.

Suppose you want to write that in the same file, you can do as follows:

Set-Content -Path "C:\temp\Newtext.txt" -Value (get-content -Path "c:\Temp\Newtext.txt" | Select-String -Pattern 'H\|159' -NotMatch)

There's nothing built into java to do this. But, hey, java is a programming language, so.. let's program it!

map.entrySet().stream().map(e -> e.getKey() + "=" + e.getValue()).collect(Collectors.joining("&"))

This gives you "param1=12&param2=cat". Now we need to join the URL and this bit together. You'd think you can just do: URL + "?" + theAbove but if the URL already contains a question mark, you have to join it all together with "&" instead. One way to check is to see if there's a question mark in the URL someplace already.

Also, I don't quite know what is in your map. If it's raw stuff, you probably have to safeguard the call to e.getKey() and e.getValue() with URLEncoder.encode or similar.

Yet another way to go is that you take a wider view. Are you trying to append a map's content to a URL, or... are you trying to make an HTTP(S) request from a java process with the stuff in the map as (additional) HTTP params? In the latter case, you can look into an http library like OkHttp which has some nice APIs to do this job, then you can forego any need to mess about with that URL in the first place.

public static JsonSerializerSettings JsonSerializer { get; set; } = new JsonSerializerSettings()
        {
            DateFormatString= "yyyy-MM-dd HH:mm:ss",
            NullValueHandling = NullValueHandling.Ignore,
            ContractResolver = new LowercaseContractResolver()
        };

Hello,

I'm using this property when I need set JsonSerializerSettings

I've come up with this one, which has satisfied my requirements (I wanted my extension method to emulate as close as possible the return of the framework's TryParse, but without try{} catch{} blocks and without the compiler complaining about inferring a nullable type within the framework method)

private static bool TryParseNullableInt(this string s, out int? result)
{
    int i;
    result = int.TryParse(s, out i) ? (int?)i : null;
    return result != null;
}

You can use "group by" + "orderby". See LINQ 101 for details

var list = new List<string> {"a", "b", "a", "c", "a", "b"};
var q = from x in list
        group x by x into g
        let count = g.Count()
        orderby count descending
        select new {Value = g.Key, Count = count};
foreach (var x in q)
{
    Console.WriteLine("Value: " + x.Value + " Count: " + x.Count);
}

In response to this post (now deleted):

If you have a list of some custom objects then you need to use custom comparer or group by specific property.

Also query can't display result. Show us complete code to get a better help.

Based on your latest update:

You have this line of code:

group xx by xx into g

Since xx is a custom object system doesn't know how to compare one item against another. As I already wrote, you need to guide compiler and provide some property that will be used in objects comparison or provide custom comparer. Here is an example:

Note that I use Foo.Name as a key - i.e. objects will be grouped based on value of Name property.

There is one catch - you treat 2 objects to be duplicate based on their names, but what about Id ? In my example I just take Id of the first object in a group. If your objects have different Ids it can be a problem.

//Using extension methods
var q = list.GroupBy(x => x.Name)
            .Select(x => new {Count = x.Count(), 
                              Name = x.Key, 
                              ID = x.First().ID})
            .OrderByDescending(x => x.Count);

//Using LINQ
var q = from x in list
        group x by x.Name into g
        let count = g.Count()
        orderby count descending
        select new {Name = g.Key, Count = count, ID = g.First().ID};

foreach (var x in q)
{
    Console.WriteLine("Count: " + x.Count + " Name: " + x.Name + " ID: " + x.ID);
}

I've used both but in massive complex procedures have always found temp tables better to work with and more methodical. CTEs have their uses but generally with small data.

For example I've created sprocs that come back with results of large calculations in 15 seconds yet convert this code to run in a CTE and have seen it run in excess of 8 minutes to achieve the same results.

i now have this:

    function swapStyleSheet() {
        var old = $('#pagestyle').attr('href');
        var newCss = $('#changeCss').attr('href');
        var sheet = newCss +Math.random(0,10);
        $('#pagestyle').attr('href',sheet);
        $('#profile').attr('href',old);
        }
    $("#changeCss").on("click", function(event) { 
        swapStyleSheet();
    } );

make any element in your page with id changeCss with a href attribute with the new css url in it. and a link element with the starting css:

<link id="pagestyle" rel="stylesheet" type="text/css" href="css1.css?t=" />

<img src="click.jpg" id="changeCss" href="css2.css?t=">

With Eloquent its very easy to retrieve relational data. Checkout the following example with your scenario in Laravel 5.

We have three models:

1) Article (belongs to user and category)

2) Category (has many articles)

3) User (has many articles)

1) Article.php

<?php

namespace App\Models;
 use Eloquent;

class Article extends Eloquent{

    protected $table = 'articles';

    public function user()
    {
        return $this->belongsTo('App\Models\User');
    }

    public function category()
    {
        return $this->belongsTo('App\Models\Category');
    }

}

2) Category.php

<?php

namespace App\Models;

use Eloquent;

class Category extends Eloquent
{
    protected $table = "categories";

    public function articles()
    {
        return $this->hasMany('App\Models\Article');
    }

}

3) User.php

<?php

namespace App\Models;
use Eloquent;

class User extends Eloquent
{
    protected $table = 'users';

    public function articles()
    {
        return $this->hasMany('App\Models\Article');
    }

}

You need to understand your database relation and setup in models. User has many articles. Category has many articles. Articles belong to user and category. Once you setup the relationships in Laravel, it becomes easy to retrieve the related information.

For example, if you want to retrieve an article by using the user and category, you would need to write:

$article = \App\Models\Article::with(['user','category'])->first();

and you can use this like so:

//retrieve user name 
$article->user->user_name  

//retrieve category name 
$article->category->category_name

In another case, you might need to retrieve all the articles within a category, or retrieve all of a specific user`s articles. You can write it like this:

$categories = \App\Models\Category::with('articles')->get();

$users = \App\Models\Category::with('users')->get();

You can learn more at http://laravel.com/docs/5.0/eloquent

I can start service through

am startservice com.xxx/.service.XXXService

but i don't know how to stop it yet.

The simplest way I've found is to use the Kafdrop REST API /topic/topicName and specify the key: "Accept" / value: "application/json" header in order to get back a JSON response.

This is documented here.

If there is any chance that you will need to search for empty strings,

    a['Names'].str.contains('') 

will NOT work, as it will always return True.

Instead, use

    if '' in a["Names"].values

to accurately reflect whether or not a string is in a Series, including the edge case of searching for an empty string.

Try this;

function X (id,parameter1,parameter2,...) {
    $.ajax({

            url: '@Url.Action("Actionre", "controller")',+ id,
            type: "Get",
            data: { parameter1: parameter1, parameter2: parameter2,...}

    }).done(function(result) {

        your code...
    });
}

So controller method would looks like :

public ActionResult ActionName(id,parameter1, parameter2,...)
{
   Your Code .......
}

It should be $_COOKIE['name'], not $_COOKIE('name')

$_COOKIE is an array, not a function.

I achieved to have an element with a fixed position (wiewport) but relative to the width of its parent.

I just had to wrap my fixed element and give the parent a width 100%. At the same time, the wrapped fixed element and the parent are in a div which width changes depending on the page, containing the content of the website. With this approach I can have the fixed element always at the same distance of the content, depending on the width of this one. In my case this was a 'to top' button, always showing at 15px from the bottom and 15px right from the content.

https://codepen.io/rafaqf/pen/MNqWKB

<div class="body">
  <div class="content">
    <p>Some content...</p>
    <div class="top-wrapper">
      <a class="top">Top</a>
    </div>
  </div>
</div>

.content {
  width: 600px; /*change this width to play with the top element*/
  background-color: wheat;
  height: 9999px;
  margin: auto;
  padding: 20px;
}
.top-wrapper {
  width: 100%;
  display: flex;
  justify-content: flex-end;
  z-index: 9;
  .top {
    display: flex;
    align-items: center;
    justify-content: center;
    width: 60px;
    height: 60px;
    border-radius: 100%;
    background-color: yellowgreen;
    position: fixed;
    bottom: 20px;
    margin-left: 100px;
    cursor: pointer;
    &:hover {
      opacity: .6;
    }
  }
}

If you are only interested in the packages installed globally without the full TREE then:

npm -g ls --depth=0

or locally (omit -g) :

npm ls --depth=0

If you are using a POSIX compliant OS, you could use nftw() for file tree traversal and remove (removes files or directories). If you are in C++ and your project uses boost, it is not a bad idea to use the Boost.Filesystem as suggested by Manuel.

In the code example below I decided not to traverse symbolic links and mount points (just to avoid a grand removal:) ):

#include <stdio.h>
#include <stdlib.h>
#include <ftw.h>

static int rmFiles(const char *pathname, const struct stat *sbuf, int type, struct FTW *ftwb)
{
    if(remove(pathname) < 0)
    {
        perror("ERROR: remove");
        return -1;
    }
    return 0;
}

int main(int argc, char *argv[])
{
    if (argc != 2)
    {
        fprintf(stderr,"usage: %s path\n",argv[0]);
        exit(1);
    }

    // Delete the directory and its contents by traversing the tree in reverse order, without crossing mount boundaries and symbolic links

    if (nftw(argv[1], rmFiles,10, FTW_DEPTH|FTW_MOUNT|FTW_PHYS) < 0)
    {
        perror("ERROR: ntfw");
        exit(1);
    }

    return 0;
}

We can modify entrypoint of a non-running container with the docker run command.

Example show PATH environment variable:

1. using bash and echo: This answer claims that echo will not produce any output, which is incorrect.

   docker run --rm --entrypoint bash <container> -c 'echo "$PATH"'
   

2. using printenv

   docker run --rm --entrypoint printenv <container> PATH
   

SWIFT 4

Slightly off-topic: But here is if you have an Array of Dictionaries i.e: [ [String : String] ]

var array_has_dictionary = [ // Start of array

   // Dictionary 1

   [ 
     "name" : "xxxx",
     "age" : "xxxx",
     "last_name":"xxx"
   ],

   // Dictionary 2

   [ 
     "name" : "yyy",
     "age" : "yyy",
     "last_name":"yyy"
   ],

 ] // end of array


cell.textLabel?.text =  Array(array_has_dictionary[1])[1].key
// Output: age -> yyy

If you are using tortoise git you can right-click on a file and git a diff by: Right-clicking on the first file and through the tortoisegit submenu select "Diff later" Then on the second file you can also right-click on this, go to the tortoisegit submenu and then select "Diff with yourfilenamehere.txt"

The tuple function takes only one argument which has to be an iterable

tuple([iterable])

Return a tuple whose items are the same and in the same order as iterable‘s items.

Try making 3,4 an iterable by either using [3,4] (a list) or (3,4) (a tuple)

For example

a_list.append(tuple((3, 4)))

will work

This related question points out a part of the ?read.table documentation that explains your problem:

If there is a header and the first row contains one fewer field than the number of columns, the first column in the input is used for the row names. Otherwise if row.names is missing, the rows are numbered.

Your header row likely has 1 fewer column than the rest of the file and so read.table assumes that the first column is the row.names (which must all be unique), not a column (which can contain duplicated values). You can fix this by using one of the following two Solutions:

1. adding a delimiter (ie \t or ,) to the front or end of your header row in the source file, or,
2. removing any trailing delimiters in your data

The choice will depend on the structure of your data.

Example:
Here the header row is interpreted as having one fewer column than the data because the delimiters don't match:

v1,v2,v3   # 3 items!!
a1,a2,a3,  # 4 items
b1,b2,b3,  # 4 items

This is how it is interpreted by default:

   v1,v2,v3   # 3 items!!
a1,a2,a3,  # 4 items
b1,b2,b3,  # 4 items

The first column (with no header) values are interpreted as row.names: a1 and b1. If this column contains duplicates, which is entirely possible, then you get the duplicate 'row.names' are not allowed error.

If you set row.names = FALSE, the shift doesn't happen, but you still have a mismatching number of items in the header and in the data because the delimiters don't match.

Solution 1 Add trailing delimiter to header:

v1,v2,v3,  # 4 items!!
a1,a2,a3,  # 4 items
b1,b2,b3,  # 4 items

Solution 2 Remove excess trailing delimiter from non-header rows:

v1,v2,v3   # 3 items
a1,a2,a3   # 3 items!!
b1,b2,b3   # 3 items!!

Instead of Find & Replace, you can right click the namespace in code and Refactor -> Rename.

Thanks to @Jimmy for this.

@xerq pointed correctly, here's some more reference http://www.codingdefined.com/2015/06/nodejs-error-errno-eaiagain.html

i got the same error, i solved it by updating "hosts" file present under this location in windows os

C:\Windows\System32\drivers\etc

Hope it helps!!

In case it's Friday afternoon or anytime after 1am:

Opening xcodeproj instead of xcworkspace will cause an error like this...

use the net use command:

net use Z: \\10.0.1.1\DRIVENAME

Edit 1: Also, I believe the password should be simply appended:

net use Z: \\10.0.1.1\DRIVENAME PASSWORD

You can find out more about this command and its arguments via:

net use ?

Edit 2: As Tomalak mentioned in comments, you can later un-map it via

net use Z: \delete

You can always use "FAR" = "Find and Replace". It's written under java, so it works where Java works (pretty much everywhere). Works with directories and subdirectories, searches and replaces within files, also can renames them. Also can rename bulk files.Licence = free, for both individuals or comapnies. Very fast and maintained by the developer. Find it here: http://findandreplace.sourceforge.net/

Also you can use GrepWin. Works pretty much the same. You can find it here: http://tools.tortoisesvn.net/grepWin.html

Actually the variable can be set or not, so, In Java 8 or superior its nullable value should be wrapped into an Optional object, which allows really good features. In the following example we gonna try to obtain the variable ENV_VAR1, if it doesnt exist we may throw some custom Exception to alert about it:

String ENV_VAR1 = Optional.ofNullable(System.getenv("ENV_VAR1")).orElseThrow(
  () -> new CustomException("ENV_VAR1 is not set in the environment"));

Assuming you're using bash

#!/bin/bash

current_dir=$(pwd)
script_dir=$(dirname "$0")

echo $current_dir
echo $script_dir

This script should print the directory that you're in, and then the directory the script is in. For example, when calling it from / with the script in /home/mez/, it outputs

/
/home/mez

Remember, when assigning variables from the output of a command, wrap the command in $( and ) - or you won't get the desired output.

In this Eclipse Preferences panel you can change the compiler compatibility from 1.7 to 1.6. This solved the similar message I was getting. For Eclipse, it is under: Preferences -> Java -> Compiler: 'Compiler compliance level'

The first thing you should do with date variables is confirm that R reads it as a Date. To do this, for the variable (i.e. vector/column) called Date, in the data frame called EPL2011_12, input

class(EPL2011_12$Date)

The output should read [1] "Date". If it doesn't, you should format it as a date by inputting

EPL2011_12$Date <- as.Date(EPL2011_12$Date, "%d-%m-%y")

Note that the hyphens in the date format ("%d-%m-%y") above can also be slashes ("%d/%m/%y"). Confirm that R sees it as a Date. If it doesn't, try a different formatting command

EPL2011_12$Date <- format(EPL2011_12$Date, format="%d/%m/%y")

Once you have it in Date format, you can use the subset command, or you can use brackets

WhateverYouWant <- EPL2011_12[EPL2011_12$Date > as.Date("2014-12-15"),]

Overwriting the getRegister and postRegister is tricky - if you are using git there is a high possibility that .gitignore is set to ignore framework files which will lead to the outcome that registration will still be possible in your production environment (if laravel is installed via composer for example)

Another possibility is using routes.php and adding this line:

Route::any('/auth/register','HomeController@index');

This way the framework files are left alone and any request will still be redirected away from the Frameworks register module.

# To do it for all names
df[] <- lapply( df, factor) # the "[]" keeps the dataframe structure
 col_names <- names(df)
# to do it for some names in a vector named 'col_names'
df[col_names] <- lapply(df[col_names] , factor)

Explanation. All dataframes are lists and the results of [ used with multiple valued arguments are likewise lists, so looping over lists is the task of lapply. The above assignment will create a set of lists that the function data.frame.[<- should successfully stick back into into the dataframe, df

Another strategy would be to convert only those columns where the number of unique items is less than some criterion, let's say fewer than the log of the number of rows as an example:

cols.to.factor <- sapply( df, function(col) length(unique(col)) < log10(length(col)) )
df[ cols.to.factor] <- lapply(df[ cols.to.factor] , factor)

Here is an example to play with Inline SVG for a list bullet (2020 Browsers)

list-style-image: url("data:image/svg+xml,
                      <svg width='50' height='50'
                           xmlns='http://www.w3.org/2000/svg' 
                           viewBox='0 0 72 72'>
                        <rect width='100%' height='100%' fill='pink'/>
                        <path d='M70 42a3 3 90 0 1 3 3a3 3 90 0 1-3 3h-12l-3 3l-6 15l-3
                                 l-6-3v-21v-3l15-15a3 3 90 0 1 0 0c3 0 3 0 3 3l-6 12h30
                                 m-54 24v-24h9v24z'/></svg>")

• Play with SVG width & height to set the size
• Play with M70 42 to position the hand
• different behaviour on FireFox or Chromium!
• remove the rect

li{
  font-size:2em;
  list-style-image: url("data:image/svg+xml,<svg width='3em' height='3em'                          xmlns='http://www.w3.org/2000/svg' viewBox='0 0 72 72'><rect width='100%' height='100%' fill='pink'/><path d='M70 42a3 3 90 0 1 3 3a3 3 90 0 1-3 3h-12l-3 3l-6 15l-3 3h-12l-6-3v-21v-3l15-15a3 3 90 0 1 0 0c3 0 3 0 3 3l-6 12h30m-54 24v-24h9v24z'/></svg>");
}

span{
  display:inline-block;
  vertical-align:top;
  margin-top:-10px;
  margin-left:-5px;
}

<ul>
  <li><span>Apples</span></li>
  <li><span>Bananas</span></li>
  <li>Oranges</li>
</ul>

Pointing CATALINA_BASE to a different directory from CATALINA_HOME allows you to separate the configuration directory from the binaries directory.

By default, CATALINA_BASE (configurations) and CATALINA_HOME (binaries) point to the same folder, but separating the configurations from the binaries can help you to run multiple instances of Tomcat side by side without duplicating the binaries.

It is also useful when you want to update the binaries, without modifying, or needing to backup/restore your configuration files for Tomcat.

Update 2018

There is an easier way to set CATALINA_BASE now with the makebase utility. I have posted a tutorial that covers this subject at http://blog.rasia.io/blog/how-to-easily-setup-lucee-in-tomcat.html along with a video tutorial at https://youtu.be/nuugoG5c-7M

Original answer continued below

To take advantage of this feature, simply create the config directory and point to it with the CATALINA_BASE environment variable. You will have to put some files in that directory:

• Copy the conf directory from the original Tomcat installation directory, including its contents, and ensure that Tomcat has read permissions to it. Edit the configuration files according to your needs.
• Create a logs directory if conf/logging.properties points to ${catalina.base}/logs, and ensure that Tomcat has read/write permissions to it.
• Create a temp directory if you are not overriding the default of $CATALINA_TMPDIR which points to ${CATALINA_BASE}/temp, and ensure that Tomcat has write permissions to it.
• Create a work directory which defaults to ${CATALINA_BASE}/work, and ensure that Tomcat has write permissions to it.

No. It's that easy. A finite automaton (which is the data structure underlying a regular expression) does not have memory apart from the state it's in, and if you have arbitrarily deep nesting, you need an arbitrarily large automaton, which collides with the notion of a finite automaton.

You can match nested/paired elements up to a fixed depth, where the depth is only limited by your memory, because the automaton gets very large. In practice, however, you should use a push-down automaton, i.e a parser for a context-free grammar, for instance LL (top-down) or LR (bottom-up). You have to take the worse runtime behavior into account: O(n^3) vs. O(n), with n = length(input).

There are many parser generators avialable, for instance ANTLR for Java. Finding an existing grammar for Java (or C) is also not difficult.
For more background: Automata Theory at Wikipedia

First check the list:-

git stash list

copy the index you wanted to pop from the stash list

git stash pop stash@{index_number}

eg.:

git stash pop stash@{1}

if you still looking for the answer you can use input type="number" in place of type="range" min max work if it set in that order:
1-name
2-maxlength
3-size
4-min
5-max
just copy it

<input  name="X" maxlength="3" size="2" min="1" max="100" type="number" />

For both python3 and python2 you can use pyautogui (pip install pyautogui)

from pyautogui import press, typewrite, hotkey

press('a')
typewrite('quick brown fox')
hotkey('ctrl', 'w')

It's also crossplatform with Windows, OSX, and Ubuntu LTS.

I would think you'll want to think about if things really belong in a session state. This is something I find myself doing every now and then and it's a nice strongly typed approach to the whole thing but you should be careful when putting things in the session context. Not everything should be there just because it belongs to some user.

in global.asax hook the OnSessionStart event

void OnSessionStart(...)
{
    HttpContext.Current.Session.Add("__MySessionObject", new MySessionObject());
}

From anywhere in code where the HttpContext.Current property != null you can retrive that object. I do this with an extension method.

public static MySessionObject GetMySessionObject(this HttpContext current)
{
    return current != null ? (MySessionObject)current.Session["__MySessionObject"] : null;
}

This way you can in code

void OnLoad(...)
{
    var sessionObj = HttpContext.Current.GetMySessionObject();
    // do something with 'sessionObj'
}

To swap characters in a string a of position l and r

def swap(a, l, r):
    a = a[0:l] + a[r] + a[l+1:r] + a[l] + a[r+1:]
    return a

Example: swap("aaabcccdeee", 3, 7) returns "aaadcccbeee"

You have to create a date object in your controller first:

controller:

function Ctrl($scope)
{
    $scope.date = new Date();
}

view:

<div ng-app ng-controller="Ctrl">
    {{date | date:'yyyy-MM-dd'}}
</div>

JSFiddle example

Angular Date Filter Ref

Python's if can be used as a ternary operator:

>>> 'true' if True else 'false'
'true'
>>> 'true' if False else 'false'
'false'

Also, Given a DataFrame

data

as in your example, if you would like to extract column a and d only (e.i. the 1st and the 4th column), iloc mothod from the pandas dataframe is what you need and could be used very effectively. All you need to know is the index of the columns you would like to extract. For example:

>>> data.iloc[:,[0,3]]

will give you

          a         d
0  0.883283  0.100975
1  0.614313  0.221731
2  0.438963  0.224361
3  0.466078  0.703347
4  0.955285  0.114033
5  0.268443  0.416996
6  0.613241  0.327548
7  0.370784  0.359159
8  0.692708  0.659410
9  0.806624  0.875476

I had the exact same problem. The solution is simple. Just change the "name" parameter passed to the DropDownList helper to something that does not match any of the properties existing in your ViewModel. read more here: http://www.dotnetguy.co.uk/post/2009/06/25/net-mvc-selectlists-selected-value-does-not-get-set-in-the-view

I quote the Dan Watson:

In MVC if the view is strongly typed the selectlist’s selected option will be overridden and the selected option property set on the constructor will never reach the view and the first option in the dropdown will be selected instead (why is still a bit of a mystery).

cheers!

It should help you.

{% for user in users if user.active and user.id not 1 %}
   {{ user.name }}
{% endfor %}

More info: http://twig.sensiolabs.org/doc/tags/for.html

download Microsoft JDBC Driver 4.0 for SQL Server which supports:

    SQL Server versions: 2005, 2008, 2008 R2, and 2012.
    JDK version: 5.0 and 6.0.

Run the downloaded program sqljdbc__.exe. It will extract the files into a specified directory (default is Microsoft JDBC Driver 4.0 for SQL Server). You will find two jar files sqljdbc.jar (for JDBC 3.0) and sqljdbc4.jar (for JDBC 4.0), plus some .dll files and HTML help files.

Place the sqljdbc4.jar file under your application’s classpath if you are using JDK 4.0 or sqljdbc4.1.jar file if you are using JDK 6.0 or later.

this worked for me:

var blobToBase64 = function(blob, callback) {
    var reader = new FileReader();
    reader.onload = function() {
        var dataUrl = reader.result;
        var base64 = dataUrl.split(',')[1];
        callback(base64);
    };
    reader.readAsDataURL(blob);
};

As brb tea says, depends on the database implementation and the algorithm they use: MVCC or Two Phase Locking.

CUBRID (open source RDBMS) explains the idea of this two algorithms:

• Two-phase locking (2PL)

The first one is when the T2 transaction tries to change the A record, it knows that the T1 transaction has already changed the A record and waits until the T1 transaction is completed because the T2 transaction cannot know whether the T1 transaction will be committed or rolled back. This method is called Two-phase locking (2PL).

• Multi-version concurrency control (MVCC)

The other one is to allow each of them, T1 and T2 transactions, to have their own changed versions. Even when the T1 transaction has changed the A record from 1 to 2, the T1 transaction leaves the original value 1 as it is and writes that the T1 transaction version of the A record is 2. Then, the following T2 transaction changes the A record from 1 to 3, not from 2 to 4, and writes that the T2 transaction version of the A record is 3.

When the T1 transaction is rolled back, it does not matter if the 2, the T1 transaction version, is not applied to the A record. After that, if the T2 transaction is committed, the 3, the T2 transaction version, will be applied to the A record. If the T1 transaction is committed prior to the T2 transaction, the A record is changed to 2, and then to 3 at the time of committing the T2 transaction. The final database status is identical to the status of executing each transaction independently, without any impact on other transactions. Therefore, it satisfies the ACID property. This method is called Multi-version concurrency control (MVCC).

The MVCC allows concurrent modifications at the cost of increased overhead in memory (because it has to maintain different versions of the same data) and computation (in REPETEABLE_READ level you can't loose updates so it must check the versions of the data, like Hiberate does with Optimistick Locking).

In 2PL Transaction isolation levels control the following:

• Whether locks are taken when data is read, and what type of locks are requested.

• How long the read locks are held.

• Whether a read operation referencing rows modified by another transaction:

  • Block until the exclusive lock on the row is freed.

  • Retrieve the committed version of the row that existed at the time the statement or transaction started.

  • Read the uncommitted data modification.

Choosing a transaction isolation level does not affect the locks that are acquired to protect data modifications. A transaction always gets an exclusive lock on any data it modifies and holds that lock until the transaction completes, regardless of the isolation level set for that transaction. For read operations, transaction isolation levels primarily define the level of protection from the effects of modifications made by other transactions.

A lower isolation level increases the ability of many users to access data at the same time, but increases the number of concurrency effects, such as dirty reads or lost updates, that users might encounter.

Concrete examples of the relation between locks and isolation levels in SQL Server (use 2PL except on READ_COMMITED with READ_COMMITTED_SNAPSHOT=ON)

• READ_UNCOMMITED: do not issue shared locks to prevent other transactions from modifying data read by the current transaction. READ UNCOMMITTED transactions are also not blocked by exclusive locks that would prevent the current transaction from reading rows that have been modified but not committed by other transactions. [...]

• READ_COMMITED:

  • If READ_COMMITTED_SNAPSHOT is set to OFF (the default): uses shared locks to prevent other transactions from modifying rows while the current transaction is running a read operation. The shared locks also block the statement from reading rows modified by other transactions until the other transaction is completed. [...] Row locks are released before the next row is processed. [...]
  • If READ_COMMITTED_SNAPSHOT is set to ON, the Database Engine uses row versioning to present each statement with a transactionally consistent snapshot of the data as it existed at the start of the statement. Locks are not used to protect the data from updates by other transactions.

• REPETEABLE_READ: Shared locks are placed on all data read by each statement in the transaction and are held until the transaction completes.

• SERIALIZABLE: Range locks are placed in the range of key values that match the search conditions of each statement executed in a transaction. [...] The range locks are held until the transaction completes.

Swift 4 .

Simplest Method

override func viewDidLoad() {
      super.viewDidLoad()
      NotificationCenter.default.addObserver(self, selector: #selector(keyboardWillShow), name: .UIKeyboardWillShow, object: nil)
}

func keyboardWillShow(notification: NSNotification) {  

      if let keyboardSize = (notification.userInfo?[UIKeyboardFrameBeginUserInfoKey] as? NSValue)?.cgRectValue {
             let keyboardHeight : Int = Int(keyboardSize.height)
             print("keyboardHeight",keyboardHeight) 
      }

}

Iterate over the Array. First initialize the maximum value to the first element of the array and then for each element optimize it if the element under consideration is greater.

Assuming you are looking for a method and not a magic function that already exists, there is frankly no better way. We could all write code snippets with clever tricks for limited character sets, but at the end of the day at somepoint you have to convert the characters.

The best approach for this conversion is to do so prior to the comparison. This allows you a good deal of flexibility when it comes to encoding schemes, which your actual comparison operator should be ignorant of.

You can of course 'hide' this conversion behind your own string function or class, but you still need to convert the strings prior to comparison.

You can either use:

• return X. this will return only one value.

• return object. will return a full object. For example your object might include X, Y, and Z values.

• pass array. arrays are passed by reference. i.e. if you pass array of integers, modified the array inside the method, then the original code will see the changes.

Example on passing Array.

void methodOne{
    int [] arr = {1,2,3};
    methodTwo(arr);
    ...//print arr here
}
void methodTwo(int [] arr){
    for (int i=0; i<arr.length;i++){
         arr[i]+=3;
    }
}

This will print out: 4,5,6.

Please try module pexpect. Here is my code:

import pexpect
remove = pexpect.spawn('sudo dpkg --purge mytool.deb')
remove.logfile = open('log/expect-uninstall-deb.log', 'w')
remove.logfile.write('try to dpkg --purge mytool\n')
if remove.expect(['(?i)password.*']) == 0:
    # print "successfull"
    remove.sendline('mypassword')
    time.sleep(2)
    remove.expect(pexpect.EOF,5)
else:
    raise AssertionError("Fail to Uninstall deb package !")

If code elegance ranks higher than the performance hit of regex, then

'1234567'.match(/^(.*)(.{3})/).slice(1).join(',')
=> "1234,567"

There's a lot of room to further modify the regex to be more precise.

If join() doesn't work then you might need to use map with a closure, at which point the other answers here may be less bytes and line noise.

You've probably got Option Strict turned on (which is a good thing), and the compiler is telling you that you can't add a string and an int. Try this:

t = s1 & i.ToString()

As of 2020 and Go version 1.13+, in Windows the best way for updating GOPATH is just typing in command prompt:

setx GOPATH C:\mynewgopath

You don't want to take care of normalizing your data in a view - what if the user changes the data that gets submitted? Instead you could take care of it in the model using the before_save (or the before_validation) callback. Here's an example of the relevant code for a model like yours:

class Place < ActiveRecord::Base   before_save do |place|     place.city = place.city.downcase.titleize     place.country = place.country.downcase.titleize   end end 

You can also check out the Ruby on Rails guide for more info.

To answer you question more directly, something like this would work:

<%= f.text_field :city, :value => (f.object.city ? f.object.city.titlecase : '') %>   

This just means if f.object.city exists, display the titlecase version of it, and if it doesn't display a blank string.

You can use sort.Slice() plus sort.Search()

type Person struct {
    Name string
}

func main() {
    crowd := []Person{{"Zoey"}, {"Anna"}, {"Benni"}, {"Chris"}}

    sort.Slice(crowd, func(i, j int) bool {
        return crowd[i].Name <= crowd[j].Name
    })

    needle := "Benni"
    idx := sort.Search(len(crowd), func(i int) bool {
        return string(crowd[i].Name) >= needle
    })

    if crowd[idx].Name == needle {
        fmt.Println("Found:", idx, crowd[idx])
    } else {
        fmt.Println("Found noting: ", idx)
    }
}

See: https://play.golang.org/p/47OPrjKb0g_c

A useful trick to avoid creating temporary patch files:

git diff | patch -p1 -d [dst-dir]

For Chrome/Safari/Firefox you could add a display: block and use a negative margin to compensate the offset, like:

a[name] {
    display: block;
    padding-top: 90px;
    margin-top: -90px;
}

See example http://codepen.io/swed/pen/RrZBJo

$ lsof | tree MyFold

As shown in the image attached:

This is an old question, but I am still able to see this at the top of the search result of Google, so I guess it would be meaningful to add a new answer 4 years after the question is asked.

First of all, there is better support in storing JSON in RDBMS. You may consider switching to PostgreSQL (although MySQL has supported JSON since v5.7.7). PostgreSQL uses very similar SQL commands as MySQL except they support more functions. One of the functions they added is that they provide JSON data type and you are now able to query the JSON stored. (Some reference on this) If you are not making up the query directly in your program, for example, using PDO in php or eloquent in Laravel, all you need to do is just to install PostgreSQL on your server and change database connection settings. You don't even need to change your code.

Most of the time, as the other answers suggested, storing data as JSON directly in RDBMS is not a good idea. There are some exception though. One situation I can think of is a field with variable number of linked entry.

For example, for storing tag of a blog post, normally you will need to have a table for blog post, a table of tag and a matching table. So, when the user wants to edit a post and you need to display which tag is related to that post, you will need to query 3 tables. This will damage the performance a lot if your matching table / tag table is long.

By storing the tags as JSON in the blog post table, the same action only requires a single table search. The user will then be able to see the blog post to be edit quicker, but this will damage the performance if you want to make a report on what post is linked to a tag, or maybe search by tag.

You may also try to de-normalize the database. By duplicating the data and storing the data in both ways, you can receive benefit of both method. You will just need a little bit more time to store your data and more storage space (which is cheap comparing to the cost of more computing power)

You can disable them altogether by

(setq make-backup-files nil)

The original intent was that GET was used for getting data back and POST was to be anything. The rule of thumb that I use is that if I'm sending anything back to the server, I use POST. If I'm just calling an URL to get back data, I use GET.

Set the buildToolsVersion '26.0.2' then change classpath 'com.android.tools.build:gradle:3.0.1'.

Make sure you set compileSdkVersion to 26 whiles targetSdkVersion is also set 26.

It is also appropriate to sent set compile 'com.android.support:appcompat-v7:26.0.2'.

I hope help you.

/// <summary>
/// Get the integer part of any decimal number passed trough a string 
/// </summary>
/// <param name="decimalNumber">String passed</param>
/// <returns>teh integer part , 0 in case of error</returns>
private int GetIntPart(String decimalNumber)
{
    if(!Decimal.TryParse(decimalNumber, NumberStyles.Any , new CultureInfo("en-US"), out decimal dn))
    {
        MessageBox.Show("String " + decimalNumber + " is not in corret format", "GetIntPart", MessageBoxButtons.OK, MessageBoxIcon.Error);
        return default(int);
    } 

    return Convert.ToInt32(Decimal.Truncate(dn));
}

qrcode-generator on Github. Simplest script and works like charm.

Pros:

• No third party dependency
• No limitations for the number of QR code generations

I had the same issue earlier, but my situation was a bit different in the front-end. I'll share my scenario anyway, maybe someone might find it useful.

I had an api call to /api/user/register in the frontend with email, password and username as request body. On submitting the form(register form), a handler function is called which initiates the fetch call to /api/user/register. I used the event.preventDefault() in the beginning line of this handler function, all other lines,like forming the request body as well the fetch call was written after the event.preventDefault(). This returned a pending promise.

But when I put the request body formation code above the event.preventDefault(), it returned the real promise. Like this:

event.preventDefault();
    const data = {
        'email': email,
        'password': password
    }
    fetch(...)
     ...

instead of :

     const data = {
            'email': email,
            'password': password
        }
     event.preventDefault();
     fetch(...)
     ...

Here is from pandas docs on advanced indexing:

The section will explain exactly what you need! Turns out df.loc (as .ix has been deprecated -- as many have pointed out below) can be used for cool slicing/dicing of a dataframe. And. It can also be used to set things.

df.loc[selection criteria, columns I want] = value

So Bren's answer is saying 'find me all the places where df.A == 0, select column B and set it to np.nan'

As of python 3.5.2, you can use:

class C(B):
def method(self, arg):
    super().method(arg)    # This does the same thing as:
                           # super(C, self).method(arg)

https://docs.python.org/3/library/functions.html#super

Since awk and perl are closely related...

Perl equivalents of @Dennis's awk solutions:

To print the second line:
perl -ne 'print if $. == 2' file

To print the second field:
perl -lane 'print $F[1]' file

To print the third field of the fifth line:
perl -lane 'print $F[2] if $. == 5' file

Perl equivalent of @Glenn's solution:

Print the j'th field of the i'th line

perl -lanse 'print $F[$j-1] if $. == $i' -- -i=5 -j=3 file

Perl equivalents of @Hai's solutions:

if you are looking for second columns that contains abc:

perl -lane 'print if $F[1] =~ /abc/' foo

... and if you want to print only a particular column:

perl -lane 'print $F[2] if $F[1] =~ /abc/' foo

... and for a particular line number:

perl -lane 'print $F[2] if $F[1] =~ /abc/ && $. == 5' foo

-l removes newlines, and adds them back in when printing
-a autosplits the input line into array @F, using whitespace as the delimiter
-n loop over each line of the input file
-e execute the code within quotes
$F[1] is the second element of the array, since Perl starts at 0
$. is the line number

This is cleaner:

ul.nav a:hover { color: #fff !important; }

There's no need to get more specific than this. Unfortunately, the !important is necessary in this instance.

I also added :focus and :active to the same declaration for accessibility reasons and for smartphone/tablet/touchscreen users.

Building on what is mentioned in the comments, the simplest solution would be:

@RequestMapping(method = RequestMethod.PUT, consumes = MediaType.APPLICATION_JSON_VALUE)
@ResponseBody
public Collection<BudgetDTO> updateConsumerBudget(@RequestBody SomeDto someDto) throws GeneralException, ParseException {

    //whatever

}

class SomeDto {

   private List<WhateverBudgerPerDateDTO> budgetPerDate;


  //getters setters
}

The solution assumes that the HTTP request you are creating actually has

Content-Type:application/json instead of text/plain

Your code is work well on this demo:

http://sqlfiddle.com/#!8/87e10/1/0

I think you are doing second query (insert...) twice. Try

select * from my_table

before insert new row and you will get that your data already exist or not.

var elem=jQuery(this);
elem[0].scrollIntoView(true);

find [SOURCEPATH] -type f -name '[PATTERN]' | 
    while read P; do cp --parents "$P" [DEST]; done

you may remove the --parents but there is a risk of collision if multiple files bear the same name.

How much data can be added in java.util.List in Java at the maximum?

This is very similar to Theoretical limit for number of keys (objects) that can be stored in a HashMap?

The documentation of java.util.List does not explicitly documented any limit on the maximum number of elements. The documentation of List.toArray however, states that ...

Return an array containing all of the elements in this list in proper sequence (from first to last element); would have trouble implementing certain methods faithfully, such as

... so strictly speaking it would not be possible to faithfully implement this method if the list had more than 2³¹-1 = 2147483647 elements since that is the largest possible array.

Some will argue that the documentation of size()...

Returns the number of elements in this list. If this list contains more than Integer.MAX_VALUE elements, returns Integer.MAX_VALUE.

...indicates that there is no upper limit, but this view leads to numerous inconsistencies. See this bug report.

Is there any default size an array list?

If you're referring to ArrayList then I'd say that the default size is 0. The default capacity however (the number of elements you can insert, without forcing the list to reallocate memory) is 10. See the documentation of the default constructor.

The size limit of ArrayList is Integer.MAX_VALUE since it's backed by an ordinary array.

I met this issue too. When I add dependencies in the pom.xml, I checked in the local folder /Users/xyz/.m2/ and the jars are already downloaded there, but cann't added the the buildpath of the eclipse.

My eclipse Version: Mars.2 Release (4.5.2)

right click project > Maven > Enable Workspace Resolution

And this solved my issue.

I am surprised that the connection string works for you, because it is missing a semi-colon. Set is only used with objects, so you would not say Set strNaam.

Set cn = CreateObject("ADODB.Connection")
With cn
 .Provider = "Microsoft.Jet.OLEDB.4.0"
  .ConnectionString = "Data Source=D:\test.xls " & _
  ";Extended Properties=""Excel 8.0;HDR=Yes;"""
.Open
End With
strQuery = "SELECT * FROM [Sheet1$E36:E38]"
Set rs = cn.Execute(strQuery)
Do While Not rs.EOF
  For i = 0 To rs.Fields.Count - 1
    Debug.Print rs.Fields(i).Name, rs.Fields(i).Value
    strNaam = rs.Fields(0).Value
  Next
  rs.MoveNext
Loop
rs.Close

There are other ways, depending on what you want to do, such as GetString (GetString Method Description).

A valid reason for rethrowing exceptions can be that you want to add information to the exception, or perhaps wrap the original exception in one of your own making:

public static string SerializeDTO(DTO dto) {
  try {
      XmlSerializer xmlSer = new XmlSerializer(dto.GetType());
      StringWriter sWriter = new StringWriter();
      xmlSer.Serialize(sWriter, dto);
      return sWriter.ToString();
  }
  catch(Exception ex) {
    string message = 
      String.Format("Something went wrong serializing DTO {0}", DTO);
    throw new MyLibraryException(message, ex);
  }
}

Go inside bin folder in C drive where Postgres is installed. run following command in git bash or Command prompt:

pg_ctl.exe restart -D "<path upto data>"

Ex:

pg_ctl.exe restart -D  "C:\Program Files\PostgreSQL\9.6\data"

Another way: type "services.msc" in run popup(windows + R). This will show all services running Select Postgres service from list and click on start/stop/restart.

Thanks

Looking at the two's complement system from a math point of view it really makes sense. In ten's complement, the idea is to essentially 'isolate' the difference.

Example: 63 - 24 = x

We add the complement of 24 which is really just (100 - 24). So really, all we are doing is adding 100 on both sides of the equation.

Now the equation is: 100 + 63 - 24 = x + 100, that is why we remove the 100 (or 10 or 1000 or whatever).

Due to the inconvenient situation of having to subtract one number from a long chain of zeroes, we use a 'diminished radix complement' system, in the decimal system, nine's complement.

When we are presented with a number subtracted from a big chain of nines, we just need to reverse the numbers.

Example: 99999 - 03275 = 96724

That is the reason, after nine's complement, we add 1. As you probably know from childhood math, 9 becomes 10 by 'stealing' 1. So basically it's just ten's complement that takes 1 from the difference.

In Binary, two's complement is equatable to ten's complement, while one's complement to nine's complement. The primary difference is that instead of trying to isolate the difference with powers of ten (adding 10, 100, etc. into the equation) we are trying to isolate the difference with powers of two.

It is for this reason that we invert the bits. Just like how our minuend is a chain of nines in decimal, our minuend is a chain of ones in binary.

Example: 111111 - 101001 = 010110

Because chains of ones are 1 below a nice power of two, they 'steal' 1 from the difference like nine's do in decimal.

When we are using negative binary number's, we are really just saying:

0000 - 0101 = x

1111 - 0101 = 1010

1111 + 0000 - 0101 = x + 1111

In order to 'isolate' x, we need to add 1 because 1111 is one away from 10000 and we remove the leading 1 because we just added it to the original difference.

1111 + 1 + 0000 - 0101 = x + 1111 + 1

10000 + 0000 - 0101 = x + 10000

Just remove 10000 from both sides to get x, it's basic algebra.

From Creating Pipes in C, this shows you how to fork a program to use a pipe. If you don't want to fork(), you can use named pipes.

In addition, you can get the effect of prog1 | prog2 by sending output of prog1 to stdout and reading from stdin in prog2. You can also read stdin by opening a file named /dev/stdin (but not sure of the portability of that).

/*****************************************************************************
 Excerpt from "Linux Programmer's Guide - Chapter 6"
 (C)opyright 1994-1995, Scott Burkett
 ***************************************************************************** 
 MODULE: pipe.c
 *****************************************************************************/

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>

int main(void)
{
        int     fd[2], nbytes;
        pid_t   childpid;
        char    string[] = "Hello, world!\n";
        char    readbuffer[80];

        pipe(fd);

        if((childpid = fork()) == -1)
        {
                perror("fork");
                exit(1);
        }

        if(childpid == 0)
        {
                /* Child process closes up input side of pipe */
                close(fd[0]);

                /* Send "string" through the output side of pipe */
                write(fd[1], string, (strlen(string)+1));
                exit(0);
        }
        else
        {
                /* Parent process closes up output side of pipe */
                close(fd[1]);

                /* Read in a string from the pipe */
                nbytes = read(fd[0], readbuffer, sizeof(readbuffer));
                printf("Received string: %s", readbuffer);
        }

        return(0);
}

Here's a simple example that can demonstrate the difference.

The main difference is that array will make a copy of the original data and using different object we can modify the data in the original array.

import numpy as np
a = np.arange(0.0, 10.2, 0.12)
int_cvr = np.asarray(a, dtype = np.int64)

The contents in array (a), remain untouched, and still, we can perform any operation on the data using another object without modifying the content in original array.

Just put your Images in Public Directory (public/...folder or direct images).
Public directory is by default rendered by laravel application.
Let's suppose I stored images in public/images/myimage.jpg.
Then in your HTML view, page like: (image.blade.php)

<img src="{{url('/images/myimage.jpg')}}" alt="Image"/>

Note: This is not unicode compliant. "IU".split('') results in the 4 character array ["I", "?", "?", "u"] which can lead to dangerous bugs. See answers below for safe alternatives.

Just split it by an empty string.

var output = "Hello world!".split('');_x000D_
console.log(output);

See the String.prototype.split() MDN docs.

Or, if you need to access the element that has that property and it does not use an id, you could go this route:

$("img").each(function () {
        if ($(this).css("float") == "left") { $(this).addClass("left"); }
        if ($(this).css("float") == "right") { $(this).addClass("right"); }
    })

LINQ-to-SQL is a remarkable piece of technology that is very simple to use, and by and large generates very good queries to the back end. LINQ-to-EF was slated to supplant it, but historically has been extremely clunky to use and generated far inferior SQL. I don't know the current state of affairs, but Microsoft promised to migrate all the goodness of L2S into L2EF, so maybe it's all better now.

Personally, I have a passionate dislike of ORM tools (see my diatribe here for the details), and so I see no reason to favour L2EF, since L2S gives me all I ever expect to need from a data access layer. In fact, I even think that L2S features such as hand-crafted mappings and inheritance modeling add completely unnecessary complexity. But that's just me. ;-)

#include <iostream>
#include <sstream>

std::string input = "abc,def,ghi";
std::istringstream ss(input);
std::string token;

while(std::getline(ss, token, ',')) {
    std::cout << token << '\n';
}

abc
def
ghi

An accessed dictionary value (a list in this case) is the original value, separate from the dictionary which is used to access it. You would increment the values in the list the same way whether it's in a dictionary or not:

l = dictionary.get('C1')
for i in range(len(l)):
    l[i] += 10

Check if there is whitespace before = sign of excel formula

object.__del__(self) is called when the instance is about to be destroyed.

>>> class Test:
...     def __del__(self):
...         print "deleted"
... 
>>> test = Test()
>>> del test
deleted

Object is not deleted unless all of its references are removed(As quoted by ethan)

Also, From Python official doc reference:

del x doesn’t directly call x.del() — the former decrements the reference count for x by one, and the latter is only called when x‘s reference count reaches zero

For each document, the update operator $set can set multiple values, so rather than replacing the entire object in the items array, you can set the name and value fields of the object individually.

{'$set':  {'items.$.name': update.name , 'items.$.value': update.value}}

The Sortable JS library is compatible with touch screens and does not require jQuery.

The way it handles touch screens it that you need to touch the screen for about 1 second to start dragging an item.

Also, they present a video test showing that this library is running faster than JQuery UI Sortable.

$client = new \GuzzleHttp\Client();
$request = $client->post('http://demo.website.com/api', [
    'body' => json_encode($dataArray)
]);
$response = $request->getBody();

Add

openssl.cafile in php.ini file

Your question was already answered by the other posters, I'd just like to point out that

 delete from table where id <> 2

(or variants thereof, not id = 2 etc) will not delete rows where id is NULL.

If you also want to delete rows with id = NULL:

delete from table where id <> 2 or id is NULL