For those using the Symfony framework, the phpseclib can also be used to connect via SSH. It can be installed using composer:

composer require phpseclib/phpseclib

Next, simply use it as follows:

use phpseclib\Net\SSH2;

// Within a controller for example:
$ssh = new SSH2('hostname or ip');
if (!$ssh->login('username', 'password')) {
    // Login failed, do something
}

$return_value = $ssh->exec('command');

i just wrote a very fast solution by combining all knowledge gain above

    function pinger($address){
        if(strtolower(PHP_OS)=='winnt'){
            $command = "ping -n 1 $address";
            exec($command, $output, $status);
        }else{
            $command = "ping -c 1 $address";
            exec($command, $output, $status);
        }
        if($status === 0){
            return true;
        }else{
            return false;
        }
    }

This could be pretty ugly, but doesn't Chrome use the NPAPI for plugins like Safari? In that case, you could write a wrapper plugin with the NPAPI that made the appropriate ActiveX creation and calls to run the plugin. If you do a lot of scripting against those plugins, you might have to be a bit of work to proxy those calls through to the wrapped ActiveX control.

This is intended behavior.

When you make an HTTP request, the server normally returns code 200 OK. If you set If-Modified-Since, the server may return 304 Not modified (and the response will not have the content). This is supposed to be your cue that the page has not been modified.

The authors of the class have foolishly decided that 304 should be treated as an error and throw an exception. Now you have to clean up after them by catching the exception every time you try to use If-Modified-Since.

Use the below:

var regEx = new RegExp(pattern1+'|'+pattern2, 'gi');

str.match(regEx);

The best Grids in my opinion are below:

• Flexigrid: http://flexigrid.info/
• jQuery Grid: http://www.trirand.com/blog/
• jqGridView: http://plugins.jquery.com/project/jqGridView
• jqxGrid: http://www.jqwidgets.com/
• Ingrid: http://reconstrukt.com/ingrid/
• SlickGrid http://github.com/mleibman/SlickGrid
• DataTables http://www.datatables.net/index
• ShieldUI http://demos.shieldui.com/web/grid-virtualization/performance-1mil-rows

My best 3 options are jqGrid, jqxGrid and DataTables. They can work with thousands of rows and support virtualization.

I am working on a MVC5/Web API project and needed to be able to get authorization for the Web Api methods. When my index view is first loaded I make a call to the 'token' Web API method which I believe is created automatically.

The client side code (CoffeeScript) to get the token is:

getAuthenticationToken = (username, password) ->
    dataToSend = "username=" + username + "&password=" + password
    dataToSend += "&grant_type=password"
    $.post("/token", dataToSend).success saveAccessToken

If successful the following is called, which saves the authentication token locally:

saveAccessToken = (response) ->
    window.authenticationToken = response.access_token

Then if I need to make an Ajax call to a Web API method that has the [Authorize] tag I simply add the following header to my Ajax call:

{ "Authorization": "Bearer " + window.authenticationToken }

Instead of catching the error, wouldn't it be possible to test in or before the myplotfunction() function first if the error will occur (i.e. if the breaks are unique) and only plot it for those cases where it won't appear?!

You have to bind your event handlers to correct context (this):

onChange={this.setAuthorState.bind(this)}

Use this to remove iframe from parent within iframe itself

frameElement.parentNode.removeChild(frameElement)

It works with same origin only(not allowed with cross origin)

You need to set the property server.contextPath to /myWebApp.

Check out this part of the documentation

The easiest way to set that property would be in the properties file you are using (most likely application.properties) but Spring Boot provides a whole lot of different way to set properties. Check out this part of the documentation

EDIT

As has been mentioned by @AbdullahKhan, as of Spring Boot 2.x the property has been deprecated and should be replaced with server.servlet.contextPath as has been correctly mentioned in this answer.

Here is a fast and simple solution.

Pick two random numbers in the range (0, 1), namely a and b. If b < a, swap them. Your point is (b*R*cos(2*pi*a/b), b*R*sin(2*pi*a/b)).

You can think about this solution as follows. If you took the circle, cut it, then straightened it out, you'd get a right-angled triangle. Scale that triangle down, and you'd have a triangle from (0, 0) to (1, 0) to (1, 1) and back again to (0, 0). All of these transformations change the density uniformly. What you've done is uniformly picked a random point in the triangle and reversed the process to get a point in the circle.

You can do it like this:

I have a folder named utilities and inside that I have a file named _variables.scss

in that file i declare variables like so:

$black: #000;
$white: #fff;

then I have the style.scss file in which i import all of my other scss files like this:

// Utilities
@import "utilities/variables";

// Base Rules
@import "base/normalize";
@import "base/global";

then, within any of the files I have imported, I should be able to access the variables I have declared.

Just make sure you import the variable file before any of the others you would like to use it in.

Make sure all services windows are closed before starting install/uninstall

You just add one additional row before you execute the loop. This row contains your CSV file header name.

schema = ['a','b','c','b']
row = 4
generators = ['A','B','C','D']
with open('test.csv','wb') as csvfile:    
     writer = csv.writer(csvfile, delimiter=delimiter)
# Gives the header name row into csv
     writer.writerow([g for g in schema])   
#Data add in csv file       
     for x in xrange(rows):
         writer.writerow([g() for g in generators])

There is another way to count the number of characters in each string. Assuming we have a String as String str = "abfdvdvdfv"

We can then count the number of times each character appears by traversing only once as

for (int i = 0; i < str.length(); i++) 
{
    if(null==map.get(str.charAt(i)+""))
    {
        map.put(str.charAt(i)+"", new Integer(1));
    }
    else
    {
       Integer count = map.get(str.charAt(i)+"");
       map.put(str.charAt(i)+"", count+1);
    }
}

We can then check the output by traversing the Map as

for (Map.Entry<String, Integer> entry:map.entrySet()) 
{
    System.out.println(entry.getKey()+" count is : "+entry.getValue())

}

I tried this code, to retrieve shared preferences from an activity, and could not get it to work:

        SharedPreferences sharedPreferences = PreferenceManager.getDefaultSharedPreferences(this);
    sharedPreferences.getAll();
    Log.d("AddNewRecord", "getAll: " + sharedPreferences.getAll());
    Log.d("AddNewRecord", "Size: " + sharedPreferences.getAll().size());

Every time I tried, my preferences returned 0, even though I have 14 preferences saved by the preference activity. I finally found the answer. I added this to the preferences in the onCreate section.

getPreferenceManager().setSharedPreferencesName("defaultPreferences");

After I added this statement, my saved preferences returned as expected. I hope that this helps someone else who may experience the same issue that I did.

you can simply do like that in the html part:

<span>Heading Text</span>

and in the css you can make it as an h1 block using display:

span{
display:block;
font-size:20px;
}

you will get it as a h1 without bold ,
if you want it bold just add this to the css:

font-weight:bold;

Range returns a list while xrange returns an xrange object which takes the same memory irrespective of the range size,as in this case,only one element is generated and available per iteration whereas in case of using range, all the elements are generated at once and are available in the memory.

If you are using the latest version of Android studio. then you don't need to install additional software for Git other than GIT itself - https://git-scm.com/downloads

Steps

1. Create an account on Github - https://github.com/join
2. Install Git
3. Open your working project in Android studio
4. GoTo - File -> Settings -> Version Controll -> GitHub
5. Enter Login and Password which you have created just on Git Account and click on test
6. Once all credentials are true - it shows Success message. o.w Invalid Cred.
7. Now click on VCS in android studio menu bar
8. Select Import into Version Control -> Share Project on GitHub
9. The popup dialog will occure contains all your files with check mark, do ok or commit all
10. At next time whenever you want to push your project just click on VCS - > Commit Changes -> Commmit and Push.

That's it. You can find your project on your github now

I guess something like this would work:

Add System.ServiceProcess to your project references (It's on the .NET tab).

using System.ServiceProcess;

ServiceController sc = new ServiceController(SERVICENAME);

switch (sc.Status)
{
    case ServiceControllerStatus.Running:
        return "Running";
    case ServiceControllerStatus.Stopped:
        return "Stopped";
    case ServiceControllerStatus.Paused:
        return "Paused";
    case ServiceControllerStatus.StopPending:
        return "Stopping";
    case ServiceControllerStatus.StartPending:
        return "Starting";
    default:
        return "Status Changing";
}

Edit: There is also a method sc.WaitforStatus() that takes a desired status and a timeout, never used it but it may suit your needs.

Edit: Once you get the status, to get the status again you will need to call sc.Refresh() first.

Reference: ServiceController object in .NET.

Is this possible in angular 2?

Yes, it is possible.

If both of the conditions are true, will they enable the button?

No, if they are true, then the button will be disabled. disabled="true".

I try the above code but it's not working well

What did you expect? the button will be disabled when valid is false and the angular formGroup, SAForm is not valid.

A recommendation here as well, Please make the button of type button not a submit because this may cause the whole form to submit and you would need to use invalidate and listen to (ngSubmit).

If you just need to know if 'abc' is in one of the items, this is the shortest way:

if 'abc' in str(my_list):

Note: this assumes 'abc' is an alphanumeric text. Do not use it if 'abc' could be a just a special character (i.e. []', ).

public class TestLabel {

    enum Label{LABEL1, LABEL2, LABEL3, LABEL4}

    /**
     * @param args
     */
    public static void main(String[] args) {

        Label label = Label.LABEL1;

        while(true) {
            switch(label){
                case LABEL1:
                    print(label);

                case LABEL2:
                    print(label);
                    label = Label.LABEL4;
                    continue;

                case LABEL3:
                    print(label);
                    label = Label.LABEL1;
                    break;

                case LABEL4:
                    print(label);
                    label = Label.LABEL3;
                    continue;
            }
            break;
        }
    }

    public final static void print(Label label){
        System.out.println(label);
    }

I think using this will be the easiest

new Uri("pack://application:,,/FolderIcon/" + youImageICO);

or this code will work on any machine that if your folder is in your root project if you want to change it... just change this section @"..\"

public static string bingPathToAppDir(string localPath)
{
    string currentDir = Environment.CurrentDirectory;
    DirectoryInfo directory = new DirectoryInfo(
        Path.GetFullPath(Path.Combine(currentDir, @"..\..\" + localPath)));
    return directory.ToString();
}

First of all, you can't pass to alert second argument, use concatenation instead

alert("Input is " + inputValue);

Example

However in order to get values from input better to use states like this

var MyComponent = React.createClass({_x000D_
  getInitialState: function () {_x000D_
    return { input: '' };_x000D_
  },_x000D_
_x000D_
  handleChange: function(e) {_x000D_
    this.setState({ input: e.target.value });_x000D_
  },_x000D_
_x000D_
  handleClick: function() {_x000D_
    console.log(this.state.input);_x000D_
  },_x000D_
_x000D_
  render: function() {_x000D_
    return (_x000D_
      <div>_x000D_
        <input type="text" onChange={ this.handleChange } />_x000D_
        <input_x000D_
          type="button"_x000D_
          value="Alert the text input"_x000D_
          onClick={this.handleClick}_x000D_
        />_x000D_
      </div>_x000D_
    );_x000D_
  }_x000D_
});_x000D_
_x000D_
ReactDOM.render(_x000D_
  <MyComponent />,_x000D_
  document.getElementById('container')_x000D_
);

<script src="https://cdnjs.cloudflare.com/ajax/libs/react/15.1.0/react.min.js"></script>_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/react/15.1.0/react-dom.min.js"></script>_x000D_
<div id="container"></div>

If you set up a click binding in Knockout the event is passed as the second parameter. You can use the event to obtain the element that the click occurred on and perform whatever action you want.

Here is a fiddle that demonstrates: http://jsfiddle.net/jearles/xSKyR/

Alternatively, you could create your own custom binding, which will receive the element it is bound to as the first parameter. On init you could attach your own click event handler to do any actions you wish.

http://knockoutjs.com/documentation/custom-bindings.html

HTML

<div>
    <button data-bind="click: clickMe">Click Me!</button>
</div>

Js

var ViewModel = function() {
    var self = this;
    self.clickMe = function(data,event) {

      var target = event.target || event.srcElement;

      if (target.nodeType == 3) // defeat Safari bug
        target = target.parentNode;

      target.parentNode.innerHTML = "something";
    }
}

ko.applyBindings(new ViewModel());

I had the same issue and found a solution :

Previous code:

    <EditText 
    android:layout_height="wrap_content"
    android:gravity="center" 
    android:inputType ="password" 
    android:layout_width="fill_parent"
    android:id="@+id/password" 
    android:hint="password" 
    android:maxLines="1">
    </EditText>

Solution:

<EditText 
android:layout_height="wrap_content"
android:gravity="center" 
android:password="true" 
android:layout_width="fill_parent"
android:id="@+id/password" 
android:hint="password" 
android:maxLines="1">
</EditText>

The previous code does not show the 'hint', but when I changed it to the last one it started showing...

hope this be helpful to someone...

*Updated

jQuery version would be something like below:

function load(recieving_id){
    $('#roommate_but').prop('disabled', true);
    $.get('include.inc.php?i=' + recieving_id, function(data) {
        $("#roommate_but").html(data);
    });
}

Just print

network_mode: "host"

Assuming that you've designed an HTML page containing a table, I would recommend this solution. Worked like charm for me:

$(document).ready(() => {
  $("#buttonExport").click(e => {
    // Getting values of current time for generating the file name
    const dateTime = new Date();
    const day      = dateTime.getDate();
    const month    = dateTime.getMonth() + 1;
    const year     = dateTime.getFullYear();
    const hour     = dateTime.getHours();
    const minute   = dateTime.getMinutes();
    const postfix  = `${day}.${month}.${year}_${hour}.${minute}`;

    // Creating a temporary HTML link element (they support setting file names)
    const downloadElement = document.createElement('a');

    // Getting data from our `div` that contains the HTML table
    const dataType  = 'data:application/vnd.ms-excel';
    const tableDiv  = document.getElementById('divData');
    const tableHTML = tableDiv.outerHTML.replace(/ /g, '%20');

    // Setting the download source
    downloadElement.href = `${dataType},${tableHTML}`;

    // Setting the file name
    downloadElement.download = `exported_table_${postfix}.xls`;

    // Trigger the download
    downloadElement.click();

    // Just in case, prevent default behaviour
    e.preventDefault();
  });
});

Courtesy: http://www.kubilayerdogan.net/?p=218

You can edit the file format to .csv here:

downloadElement.download = `exported_table_${postfix}.csv`;

As per latest updates, caskroom packages have moved to homebrew. So try following commands:

brew tap homebrew/cask
brew cask install sublime-text

These 2 terminal commands will be enough for installing sublime.

From plt.imshow() official guide, we know that aspect controls the aspect ratio of the axes. Well in my words, the aspect is exactly the ratio of x unit and y unit. Most of the time we want to keep it as 1 since we do not want to distort out figures unintentionally. However, there is indeed cases that we need to specify aspect a value other than 1. The questioner provided a good example that x and y axis may have different physical units. Let's assume that x is in km and y in m. Hence for a 10x10 data, the extent should be [0,10km,0,10m] = [0, 10000m, 0, 10m]. In such case, if we continue to use the default aspect=1, the quality of the figure is really bad. We can hence specify aspect = 1000 to optimize our figure. The following codes illustrate this method.

%matplotlib inline
import numpy as np
import matplotlib.pyplot as plt
rng=np.random.RandomState(0)
data=rng.randn(10,10)
plt.imshow(data, origin = 'lower',  extent = [0, 10000, 0, 10], aspect = 1000)

Nevertheless, I think there is an alternative that can meet the questioner's demand. We can just set the extent as [0,10,0,10] and add additional xy axis labels to denote the units. Codes as follows.

plt.imshow(data, origin = 'lower',  extent = [0, 10, 0, 10])
plt.xlabel('km')
plt.ylabel('m')

To make a correct figure, we should always bear in mind that x_max-x_min = x_res * data.shape[1] and y_max - y_min = y_res * data.shape[0], where extent = [x_min, x_max, y_min, y_max]. By default, aspect = 1, meaning that the unit pixel is square. This default behavior also works fine for x_res and y_res that have different values. Extending the previous example, let's assume that x_res is 1.5 while y_res is 1. Hence extent should equal to [0,15,0,10]. Using the default aspect, we can have rectangular color pixels, whereas the unit pixel is still square!

plt.imshow(data, origin = 'lower',  extent = [0, 15, 0, 10])
# Or we have similar x_max and y_max but different data.shape, leading to different color pixel res.
data=rng.randn(10,5)
plt.imshow(data, origin = 'lower',  extent = [0, 5, 0, 5])

The aspect of color pixel is x_res / y_res. setting its aspect to the aspect of unit pixel (i.e. aspect = x_res / y_res = ((x_max - x_min) / data.shape[1]) / ((y_max - y_min) / data.shape[0])) would always give square color pixel. We can change aspect = 1.5 so that x-axis unit is 1.5 times y-axis unit, leading to a square color pixel and square whole figure but rectangular pixel unit. Apparently, it is not normally accepted.

data=rng.randn(10,10)
plt.imshow(data, origin = 'lower',  extent = [0, 15, 0, 10], aspect = 1.5)

The most undesired case is that set aspect an arbitrary value, like 1.2, which will lead to neither square unit pixels nor square color pixels.

plt.imshow(data, origin = 'lower',  extent = [0, 15, 0, 10], aspect = 1.2)

Long story short, it is always enough to set the correct extent and let the matplotlib do the remaining things for us (even though x_res!=y_res)! Change aspect only when it is a must.

At Dev Server - Use AnyCPU in Solution Plateform and build again. Please refer this screenshot.

signal isn't the most reliable way as it differs in implementations. I would recommend using sigaction. Tom's code would now look like this :

#include <signal.h>
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>

void my_handler(int s){
           printf("Caught signal %d\n",s);
           exit(1); 

}

int main(int argc,char** argv)
{

   struct sigaction sigIntHandler;

   sigIntHandler.sa_handler = my_handler;
   sigemptyset(&sigIntHandler.sa_mask);
   sigIntHandler.sa_flags = 0;

   sigaction(SIGINT, &sigIntHandler, NULL);

   pause();

   return 0;    
}

var i2 = JsonConvert.DeserializeObject(obj["id"].ToString(), type);

throws a parsing exception due to missing quotes around the first argument (I think). I got it to work by adding the quotes:

var i2 = JsonConvert.DeserializeObject("\"" + obj["id"].ToString() + "\"", type);

Instead of adding any tag which is never a good solution. You can always use margin property with the required element.

You can add the margin on row class itself. So it will affect globally.

.row{
  margin-top: 30px;
  margin-bottom: 30px
}

Update: Better solution in all cases would be to introduce a new class and then use it along with .row class.

.row-m-t{
  margin-top : 20px
}

Then use it wherever you want

<div class="row row-m-t"></div>

For completeness, in Numpy there are four maximum related functions. They fall into two different categories:

• np.amax/np.max, np.nanmax: for single array order statistics
• and np.maximum, np.fmax: for element-wise comparison of two arrays

I. For single array order statistics

NaNs propagator np.amax/np.max and its NaN ignorant counterpart np.nanmax.

• np.max is just an alias of np.amax, so they are considered as one function.

  >>> np.max.__name__
  'amax'
  >>> np.max is np.amax
  True
  

• np.max propagates NaNs while np.nanmax ignores NaNs.

  >>> np.max([np.nan, 3.14, -1])
  nan
  >>> np.nanmax([np.nan, 3.14, -1])
  3.14
  

II. For element-wise comparison of two arrays

NaNs propagator np.maximum and its NaNs ignorant counterpart np.fmax.

• Both functions require two arrays as the first two positional args to compare with.

  # x1 and x2 must be the same shape or can be broadcast
  np.maximum(x1, x2, /, ...);
  np.fmax(x1, x2, /, ...)
  

• np.maximum propagates NaNs while np.fmax ignores NaNs.

  >>> np.maximum([np.nan, 3.14, 0], [np.NINF, np.nan, 2.72])
  array([ nan,  nan, 2.72])
  >>> np.fmax([np.nan, 3.14, 0], [np.NINF, np.nan, 2.72])
  array([-inf, 3.14, 2.72])
  

• The element-wise functions are np.ufunc(Universal Function), which means they have some special properties that normal Numpy function don't have.

  >>> type(np.maximum)
  <class 'numpy.ufunc'>
  >>> type(np.fmax)
  <class 'numpy.ufunc'>
  >>> #---------------#
  >>> type(np.max)
  <class 'function'>
  >>> type(np.nanmax)
  <class 'function'>
  

And finally, the same rules apply to the four minimum related functions:

• np.amin/np.min, np.nanmin;
• and np.minimum, np.fmin.

<CheckBox
      android:id="@+id/checkBox1"
      android:layout_width="wrap_content"
      android:layout_height="wrap_content"
      android:text="Fees Paid Rs100:"
      android:textColor="#276ca4"
      android:checked="false"
      android:onClick="checkbox_clicked" />

Main Activity from here

   public class RegistA extends Activity {
CheckBox fee_checkbox;
 @Override
    protected void onCreate(Bundle savedInstanceState) {
      super.onCreate(savedInstanceState);
      setContentView(R.layout.activity_regist);
 fee_checkbox = (CheckBox)findViewById(R.id.checkBox1);// Fee Payment Check box
}

checkbox clicked

     public void checkbox_clicked(View v)
     {

         if(fee_checkbox.isChecked())
         {
            // true,do the task 

         }
         else
         {

         }

     }

ES6 contains inbuilt method (includes) in String's prototype, which can be used to check if string contains another string or not.

var str = 'To be, or not to be, that is the question.';_x000D_
_x000D_
console.log(str.includes('To be')); 

Following polyfill can be used to add this method in non-supported browsers. (Source)

if (!String.prototype.includes) {_x000D_
  String.prototype.includes = function(search, start) {_x000D_
    'use strict';_x000D_
    if (typeof start !== 'number') {_x000D_
      start = 0;_x000D_
    }_x000D_
    _x000D_
    if (start + search.length > this.length) {_x000D_
      return false;_x000D_
    } else {_x000D_
      return this.indexOf(search, start) !== -1;_x000D_
    }_x000D_
  };_x000D_
}

You can use this VSCode Extension called Reload

Marketplace > reload

 public static int? Timesaday { get; set; } = null;

OR

 public static Nullable<int> Timesaday { get; set; }

or

 public static int? Timesaday = null;

or

 public static int? Timesaday

or just

 public static int? Timesaday { get; set; } 


    static void Main(string[] args)
    {


    Console.WriteLine(Timesaday == null);

     //you also can check using 
     Console.WriteLine(Timesaday.HasValue);

        Console.ReadKey();
    }

The null keyword is a literal that represents a null reference, one that does not refer to any object. In programming, nullable types are a feature of the type system of some programming languages which allow the value to be set to the special value NULL instead of the usual possible values of the data type.

https://docs.microsoft.com/en-us/dotnet/csharp/language-reference/keywords/null https://en.wikipedia.org/wiki/Null

Thanks for the Answer I have modified the statements to look like below

SELECT
     AlarmEventTransactionTable.TxnID,
     CASE 
    WHEN DeviceID IN('7', '10', '62', '58', '60',
            '46', '48', '50', '137', '139',
             '141', '145', '164') THEN '01'
    WHEN DeviceID IN('8', '9', '63', '59', '61',
            '47', '49', '51', '138', '140',
            '142', '146', '165') THEN '02'
             ELSE 'NA' END AS clocking,
     AlarmEventTransactionTable.DateTimeOfTxn
FROM
     multiMAXTxn.dbo.AlarmEventTransactionTable

All the gory details can be found in the current RFC on the topic: RFC 3986 (Uniform Resource Identifier (URI): Generic Syntax)

Based on this related answer, you are looking at a list that looks like: A-Z, a-z, 0-9, -, ., _, ~, :, /, ?, #, [, ], @, !, $, &, ', (, ), *, +, ,, ;, %, and =. Everything else must be url-encoded. Also, some of these characters can only exist in very specific spots in a URI and outside of those spots must be url-encoded (e.g. % can only be used in conjunction with url encoding as in %20), the RFC has all of these specifics.

You can also add an anchor with follow attr:

(text-indent:-99999px;)
visibility: hidden;
position:absolute;
top:-80px;    

and give the parent container a position relative.

Works perfect for me.

int[] arr = { 800, 11, 50, 771, 649, 770, 240, 9 };

int temp = 0;

for (int write = 0; write < arr.Length; write++)
{
    for (int sort = 0; sort < arr.Length - 1 - write ; sort++)
    {
        if (arr[sort] > arr[sort + 1])
        {
            temp = arr[sort + 1];
            arr[sort + 1] = arr[sort];
            arr[sort] = temp;
        }
    }
}

for (int i = 0; i < arr.Length; i++) Console.Write(arr[i] + " ");

Console.ReadKey();

If you wish to open a new project from an existing source code in the following way:

File -> Import -> General -> Existing Project into Workspace

you still have the message "Invalid Project Description". I solve it just by going in

File -> Switch Workspace

and choosing one of the recent workspaces.

Here is how to create the desired outcome:

library(reshape2); library(tidyverse)
melt(outer(1:4, 1:4), varnames = c("X1", "X2")) %>%
ggplot() + 
  geom_tile(aes(X1, X2, fill = value)) + 
  scale_fill_continuous(guide = guide_legend()) +
  theme(legend.position="bottom",
        legend.spacing.x = unit(0, 'cm'))+
  guides(fill = guide_legend(label.position = "bottom"))

^{Created on 2019-12-07 by the reprex package (v0.3.0)}

Edit: no need for these imperfect options anymore, but I'm leaving them here for reference.

Two imperfect options that don't give you exactly what you were asking for, but pretty close (will at least put the colours together).

library(reshape2); library(tidyverse)
df <- melt(outer(1:4, 1:4), varnames = c("X1", "X2"))
p1 <- ggplot(df, aes(X1, X2)) + geom_tile(aes(fill = value))
p1 + scale_fill_continuous(guide = guide_legend()) +
 theme(legend.position="bottom", legend.direction="vertical")

p1 + scale_fill_continuous(guide = "colorbar") + theme(legend.position="bottom")

^{Created on 2019-02-28 by the reprex package (v0.2.1)}

take a look at this code

<form action="result.php" method="post">
Answer 1 <input type="radio" name="ans" value="ans1" /><br />
Answer 2 <input type="radio" name="ans" value="ans2"  /><br />
Answer 3 <input type="radio" name="ans" value="ans3"  /><br />
Answer 4 <input type="radio" name="ans" value="ans4"  /><br />
<input type="submit" value="submit" />
</form>

php

<?php 
if(isset($_POST['submit'])){
if(isset( $_POST['ans'])){  
echo "This is the value you are selected".$_POST['ans'];          
}         
}
?>

I know it's been quite a time since the beginning... There is a lot of wisdom in all these answers. Good indexing is the first thing when trying to improve a query. Well, almost the first. The most-first (so to speak) is making changes to code so that it's efficient. So, after all's been said and done, if one has a query with no WHERE, or when the WHERE-condition is not selective enough, there is only one way to get the data: TABLE SCAN (INDEX SCAN). If one needs all the columns from a table, then TABLE SCAN will be used - no question about it. This might be a heap scan or clustered index scan, depending on the type of data organization. The only last way to speed things up (if at all possible), is to make sure that as many cores are used as possible to do the scan: OPTION (MAXDOP 0). I'm ignoring the subject of storage, of course, but one should make sure that one has unlimited RAM, which goes without saying :)

You can't put a div directly inside a table but you can put div inside td or th element.

For that you need to do is make sure the div is inside an actual table cell, a td or th element, so do that:

HTML:-

<tr>
  <td>
    <div>
      <p>I'm text in a div.</p>
    </div>
  </td>
</tr>

For more information :-

http://css-tricks.com/using-divs-inside-tables/

Goto project -->properties --> (in the dialog box that opens goto Java build path), and in order and export select android 4.1 (your new version) and select dependencies.

Headings are normally bold-faced; that has been turned off for this demonstration of size correspondence. MSIE and Opera interpret these sizes the same, but note that Gecko browsers and Chrome interpret Heading 6 as 11 pixels instead of 10 pixels/font size 1, and Heading 3 as 19 pixels instead of 18 pixels/font size 4 (though it's difficult to tell the difference even in a direct comparison and impossible in use). It seems Gecko also limits text to no smaller than 10 pixels.

ASP.NET Core. Approach 1

If your Controller extends ControllerBase or Controller you can use Content(...) method:

[HttpGet]
public ContentResult Index() 
{
    return base.Content("<div>Hello</div>", "text/html");
}

ASP.NET Core. Approach 2

If you choose not to extend from Controller classes, you can create new ContentResult:

[HttpGet]
public ContentResult Index() 
{
    return new ContentResult 
    {
        ContentType = "text/html",
        Content = "<div>Hello World</div>"
    };
}

Legacy ASP.NET MVC Web API

Return string content with media type text/html:

public HttpResponseMessage Get()
{
    var response = new HttpResponseMessage();
    response.Content = new StringContent("<div>Hello World</div>");
    response.Content.Headers.ContentType = new MediaTypeHeaderValue("text/html");
    return response;
}

The easiest option is to just use the list() command. However, if you don't want to use it or it dose not work for some bazaar reason, you can always use this method.

word = 'foo'
splitWord = []

for letter in word:
    splitWord.append(letter)

print(splitWord) #prints ['f', 'o', 'o']

You can use RegEdit to export the following two keys:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment

HKEY_CURRENT_USER\Environment

The first set are system/global environment variables; the second set are user-level variables. Edit as needed and then import the .reg files on the new machine.

Return ABDeadlineType from repository:

public interface ABDeadlineTypeRepository extends JpaRepository<ABDeadlineType, Long> {
    List<ABDeadlineType> findAllSummarizedBy();
}

and then convert to DeadlineType. Manually or use mapstruct.

Or call constructor from @Query annotation:

public interface DeadlineTypeRepository extends JpaRepository<ABDeadlineType, Long> {

    @Query("select new package.DeadlineType(a.id, a.code) from ABDeadlineType a ")
    List<DeadlineType> findAllSummarizedBy();
}

Or use @Projection:

@Projection(name = "deadline", types = { ABDeadlineType.class })
public interface DeadlineType {

    @Value("#{target.id}")
    String getId();

    @Value("#{target.code}")
    String getText();

}

Update: Spring can work without @Projection annotation:

public interface DeadlineType {
    String getId();    
    String getText();
}

Change your storage engine to InnoDB by going to Operation

These two style of filtering are equivalent in most cases, but when query on objects base on ForeignKey or ManyToManyField, they are slightly different.

Examples from the documentation.

model
Blog to Entry is a one-to-many relation.

from django.db import models

class Blog(models.Model):
    ...

class Entry(models.Model):
    blog = models.ForeignKey(Blog)
    headline = models.CharField(max_length=255)
    pub_date = models.DateField()
    ...

objects
Assuming there are some blog and entry objects here.

queries

Blog.objects.filter(entry__headline_contains='Lennon', 
    entry__pub_date__year=2008)
Blog.objects.filter(entry__headline_contains='Lennon').filter(
    entry__pub_date__year=2008)  
    

For the 1st query (single filter one), it match only blog1.

For the 2nd query (chained filters one), it filters out blog1 and blog2.
The first filter restricts the queryset to blog1, blog2 and blog5; the second filter restricts the set of blogs further to blog1 and blog2.

And you should realize that

We are filtering the Blog items with each filter statement, not the Entry items.

So, it's not the same, because Blog and Entry are multi-valued relationships.

Reference: https://docs.djangoproject.com/en/1.8/topics/db/queries/#spanning-multi-valued-relationships
If there is something wrong, please correct me.

Edit: Changed v1.6 to v1.8 since the 1.6 links are no longer available.

Best and easiest way is to use anchor tag in CodeIgniter like eg.

<?php 
    $this->load->helper('url'); 
    echo anchor('name_of_controller_file/function_name_if_any', 'Sign Out', array('class' => '', 'id' => '')); 
?>

Refer https://www.codeigniter.com/user_guide/helpers/url_helper.html for details

This will surely work.

I tried almost all the answers proposed on this page and many other stuff. The best option I finally keeped on all my websites is the following architecture:

A single view

I display only one view in the browser. Here is my main view (/views/page.php):

<?php defined('BASEPATH') OR exit('No direct script access allowed'); ?>
<!DOCTYPE html>
<html lang="en">
    <head>
        <?= $header ?? '' ?>
    </head>
    <body>
        <div style="width:1200px">
                <?= $content ?? '' ?>
        </div> 
    </body>
</html>

Controllers deal with multiple views

Of course, I had several views but they are concatenated to build the $header and the $content variables. Here is my controller:

$data['header'] = $this->load->view('templates/google-analytics', '', TRUE)
                 .$this->load->view('templates/javascript', '', TRUE)
                 .$this->load->view('templates/css', '', TRUE);


$data['content'] = $this->load->view('templates/navbar', '', TRUE)
                  .$this->load->view('templates/alert', $myData, TRUE)
                  .$this->load->view('home/index', $myData, TRUE)
                  .$this->load->view('home/footer', '', TRUE)
                  .$this->load->view('templates/modal-login', '', TRUE);

$this->load->view('templates/page', $data);

• Look how beautiful and clear is the source code.
• You no longer have HTML markup opened in one view and closed in another.
• Each view is now dedicated to one and only one stuff.
• Look how views are concatenated: method chaining pattern, or should we say: concatanated chaining pattern!
• You can add optional parts (for example a third $javascript variable at the end of the body)
• I frequently extend CI_Controller to overload $this->load->view with extra parameters dedicated to my application to keep my controllers clean.
• If you are always loading the same views on several pages (this is finally the answer to the question), two options depending on your needs:
  • load views in views
  • extend CI_Controller or CI_Loader

I'm so proud of this architecture...

@ Attribute string binding (one way) = Two-way model binding & Callback method binding

Enabling delayed variable expansion solves you problem, the script produces "hi":

setlocal EnableDelayedExpansion

set var1=A
set var2=B

set AB=hi

set newvar=!%var1%%var2%!

echo %newvar%

Arrays are special objects in java, they have a simple attribute named length which is final.

There is no "class definition" of an array (you can't find it in any .class file), they're a part of the language itself.

10.7. Array Members

The members of an array type are all of the following:

• The public final field length, which contains the number of components of the array. length may be positive or zero.

• The public method clone, which overrides the method of the same name in class Object and throws no checked exceptions. The return type of the clone method of an array type T[] is T[].

  A clone of a multidimensional array is shallow, which is to say that it creates only a single new array. Subarrays are shared.

• All the members inherited from class Object; the only method of Object that is not inherited is its clone method.

Resources:

• JLS - Arrays

It is simply possible with childElementCount in pure javascript

var countItems = document.getElementsByTagName("ul")[0].childElementCount;_x000D_
console.log(countItems);

<div id="selected">_x000D_
  <ul>_x000D_
    <li>29</li>_x000D_
    <li>16</li>_x000D_
    <li>5</li>_x000D_
    <li>8</li>_x000D_
    <li>10</li>_x000D_
    <li>7</li>_x000D_
  </ul>_x000D_
</div>

In addition to verifying that the executables are in your path, you should also make sure that Ant can find tools.jar in your JDK. The easiest way to fix this is to add the tools.jar to the Ant classpath:

1. First Method

you have to assign null or empty string here

this.searchValue = null;
//or
this.searchValue = ' ';

Working Plunker

because no event is being fired from angular change detection. so you have to assign some value either null or string with space

2. Second Method

• use of [(ngModel)] it should work with ngModel.

why ?

because as you did binding with value attribute which is only property binding not event binding. so angular doesn't run change detection because no event relevant to Angular is fired. If you bind to an event then Angular runs change detection and the binding works and value should be changes.

see working example of same with ngModel

Working Example with ngModel

I'm guessing that your class is in a different namespace. The canonical way to solve this would be to use the resources class and a strongly typed resource:

ProjectNamespace.Properties.Resources.file

Use the IDE's resource manager to add resources.

Try this,

this.props.router.push('/foo')

warning works for versions prior to v4

and

this.props.history.push('/foo')

for v4 and above

Initial answer from 2013

If you don't mind something related to Bootstrap, an excellent (unofficial) Bootstrap Switch is available.

It uses radio types or checkboxes as switches. A type attribute has been added since V.1.8.

Source code is available on Github.

Note from 2018

I would not recommend to use those kind of old Switch buttons now, as they always seemed to suffer of usability issues as pointed by many people.

Please consider having a look at modern Switches like those.

just in case someone comes to this question, I have the easier version.

public static MediaPlayer mp;
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);

        Button b = (Button) findViewById(R.id.button);
        Button b2 = (Button) findViewById(R.id.button2);


        b.setOnClickListener(new View.OnClickListener() {

            @Override
            public void onClick(View v) {
                mp = MediaPlayer.create(MainActivity.this, R.raw.game);
                mp.start();
            }
        });

        b2.setOnClickListener(new View.OnClickListener() {
            @Override
            public void onClick(View v) {
                mp.stop();
               // mp.start();
            }
        });
    }

If you want exactly 40 spaces before the string then you should just do:

printf("                                        %s\n", myStr );

If that is too dirty, you can do (but it will be slower than manually typing the 40 spaces): printf("%40s%s", "", myStr );

If you want the string to be lined up at column 40 (that is, have up to 39 spaces proceeding it such that the right most character is in column 40) then do this: printf("%40s", myStr);

You can also put "up to" 40 spaces AfTER the string by doing: printf("%-40s", myStr);

Update 2018-02-03 with Spring Boot 1.5.8.RELEASE.

In pom.xml, you need to tell Spring plugin when it is building that it is a war file by change package to war, like this:

<packaging>war</packaging>

Also, you have to excluded the embedded tomcat while building the package by adding this:

    <!-- to deploy as a war in tomcat -->
    <dependency>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-starter-tomcat</artifactId>
        <scope>provided</scope>
    </dependency>

The full runable example is in here https://www.surasint.com/spring-boot-create-war-for-tomcat/

You have to change

<style name="MyActionBar.MenuTextStyle"
parent="android:style/TextAppearance.Holo.Widget.ActionBar.Title">

to

<style name="MyActionBar.MenuTextStyle"
parent="android:style/TextAppearance.Holo.Widget.ActionBar.Menu">

as well. This works for me.

This solution works aswell. If there is no Facebook installed, it just runs the normal share-dialog. If there is and you are not logged in, it goes to the login screen. If you are logged in, it will open the share dialog and put in the "Share url" from the Intent Extra.

Intent intent = new Intent(Intent.ACTION_SEND);
intent.putExtra(Intent.EXTRA_TEXT, "Share url");
intent.setType("text/plain");

List<ResolveInfo> matches = getMainFragmentActivity().getPackageManager().queryIntentActivities(intent, 0);
for (ResolveInfo info : matches) {
    if (info.activityInfo.packageName.toLowerCase().contains("facebook")) {
        intent.setPackage(info.activityInfo.packageName);
    }
}

startActivity(intent);

the tip of your current branch is behind its remote counterpart means that there have been changes on the remote branch that you don’t have locally. and git tells you import new changes from REMOTE and merge it with your code and then push it to remote.

You can use this command to force changes to server with local repo ().

git push -f origin master

with -f tag you will override Remote Brach code with your code.

To add on to @hardartcore's answer.

1. Instead of calling postDelayed on a Handler, the best approach would be to get callbacks from the MediaPlayer during play-back and then accordingly update the seekBar with the progress.

2. Also, pause your MediaPlayer at onStartTrackingTouch(SeekBar seekBar) of the OnSeekBarChangeListener and then re-start it on onStopTrackingTouch(SeekBar seekBar).

Use the regular Expression below in to validate a string to make sure it contains numbers, letters, or space only:

[a-zA-Z0-9 ]

Should it be LIBRARY_PATH instead of LD_LIBRARY_PATH. gcc checks for LIBRARY_PATH which can be seen with -v option

I've found that these problems are often best solved at the server layer. Do you have access to an .htaccess file where you could place a redirect rule? If so:

RedirectPermanent /path/to/page http://uri.com

This redirect will also serve a "301 Moved Permanently" response to indicate that the Flickr page (for example) is the permanent URI for the old page.

If this is not possible, you can create a custom page template for each page in question, and add the following PHP code to the top of the page template (actually, this is all you need in the template:

header('Location: http://uri.com, true, 301');

More information about PHP headers.

Use the sizing utility classes...

• h-50 = height 50%
• h-100 = height 100%

http://www.codeply.com/go/Y3nG0io2uE

 <div class="container">
        <div class="row">
            <div class="col-md-8 col-lg-6 B">
                <div class="card card-inverse card-primary">
                    <img src="http://lorempicsum.com/rio/800/500/4" class="img-fluid" alt="Responsive image">
                </div>
            </div>
            <div class="col-md-4 col-lg-3 G">
                <div class="row h-100">
                    <div class="col-md-6 col-lg-6 B h-50 pb-3">
                        <div class="card card-inverse card-success h-100">

                        </div>
                    </div>
                    <div class="col-md-6 col-lg-6 B h-50 pb-3">
                        <div class="card card-inverse bg-success h-100">

                        </div>
                    </div>
                    <div class="col-md-12 h-50">
                        <div class="card card-inverse bg-danger h-100">

                        </div>
                    </div>
                </div>
            </div>
        </div>
    </div>

Or, for an unknown number of child columns, use flexbox and the cols will fill height. See the d-flex flex-column on the row, and h-100 on the child cols.

<div class="container">
    <div class="row">
        <div class="col-md-8 col-lg-6 B">
            <div class="card card-inverse card-primary">
                <img src="http://lorempicsum.com/rio/800/500/4" class="img-fluid" alt="Responsive image">
            </div>
        </div>
        <div class="col-md-4 col-lg-3 G ">
            <div class="row d-flex flex-column h-100">
                <div class="col-md-6 col-lg-6 B h-100">
                    <div class="card bg-success h-100">

                    </div>
                </div>
                <div class="col-md-6 col-lg-6 B h-100">
                    <div class="card bg-success h-100">

                    </div>
                </div>
                <div class="col-md-12 h-100">
                    <div class="card bg-danger h-100">

                    </div>
                </div>
            </div>
        </div>
    </div>
</div>

https://www.codeply.com/go/tgzFAH8vaW

The nested generics-problem can be avoided with the @Captor annotation:

public class Test{

    @Mock
    private Service service;

    @Captor
    private ArgumentCaptor<ArrayList<SomeType>> captor;

    @Before
    public void init(){
        MockitoAnnotations.initMocks(this);
    }

    @Test 
    public void shouldDoStuffWithListValues() {
        //...
        verify(service).doStuff(captor.capture()));
    }
}

set the body max-width:110%; and the make the width on the header 110% it will leave a small margin on left that you can fiX with margin-left: -8px; margin-top: -10px;

If you will later know the length of the array you can create the initial array like this:

String[] array;

And later when you know the length you can finish initializing it like this

array = new String[42];

This is version that works for me when using a console app without a web page:

var builder = new ConfigurationBuilder()
             .SetBasePath(Directory.GetCurrentDirectory())
             .AddJsonFile("appsettings.json", optional: true, reloadOnChange: true)
             .AddJsonFile($"appsettings.{Environment.GetEnvironmentVariable("ASPNETCORE_ENVIRONMENT")}.json", optional: true);

            IConfigurationRoot configuration = builder.Build();
            AppSettings appSettings = new AppSettings();
            configuration.GetSection("AppSettings").Bind(appSettings);

Like @CoolBeans mentioned, take a look at jUnit. Here is a short tutorial to get you started as well with jUnit 4.x

Finally, if you really want to learn more about testing and test-driven development (TDD) I recommend you take a look at the following book by Kent Beck: Test-Driven Development By Example.

Note that git checkout --ours|--theirs will overwrite the files entirely, by choosing either theirs or ours version, which might be or might not be what you want to do (if you have any non-conflicted changes coming from the other side, they will be lost).

If instead you want to perform a three-way merge on the file, and only resolve the conflicted hunks using --ours|--theirs, while keeping non-conflicted hunks from both sides in place, you may want to resort to git merge-file; see details in this answer.

This is how to open any file:

from os import path

filepath = '...' # your path
file = open(filepath, 'r')

Change this (CURRENT_TIMESTAMP-30)

To This: DateADD(mi, -30, Current_TimeStamp)

To get the current date use GetDate().

MSDN Link to DateAdd Function
MSDN Link to Get Date Function

Using display: flex you can control the vertical alignment of HTML elements.

.box {_x000D_
  height: 100px;_x000D_
  display: flex;_x000D_
  align-items: center; /* Vertical */_x000D_
  justify-content: center; /* Horizontal */_x000D_
  border:2px solid black;_x000D_
}_x000D_
_x000D_
.box div {_x000D_
  width: 100px;_x000D_
  height: 20px;_x000D_
  border:1px solid;_x000D_
}

<div class="box">_x000D_
  <div>Hello</div>_x000D_
  <p>World</p>_x000D_
</div>

If you are getting this error while trying to use Swift class or method in Objective C: you forgot one of 2 steps Apple defined on this diagram:

Example:

Error shows up in your Test.m file:

Receiver 'MyClass' for class message is a forward declaration

Step 1: check that Test.h has

@class MyClass;

Step 2: find *-Swift.h file name in Build Settings (look for Objective-C Generated Interface Header Name). Name will be something like MyModule-Swift.h

Step 3: check that Test.m imports the above header

#import "MyModule-Swift.h"

I have encountered this error by mistyping the service's name, i.e. constructor (private myService: MyService).

For misspelled services, I was able to determine which service was the problem (I had several listed in the constructor) by inspecting the page in Chrome->Console. You will see as part of the message a "parameter" array list by displaying object Object, object Object, ? (or something like that). Notice where the "?" is and that is the position of the service that is causing the problem.

<html>
  <head>
    <script type="text/javascript" src="jquery.js"></script>
    <script>
      $(document).ready(function(){
        var locations = ["http://webPage1.com", "http://webPage2.com"];
        var len = locations.length;
        var iframe = $('#frame');
        var i = 0;
        setInterval(function () {
            iframe.attr('src', locations[++i % len]);
        }, 30000);
      });
    </script>
  </head>
  <body>
    <iframe id="frame"></iframe>
  </body>
</html>

array_walk(
    $myArray,
    function (&$entry) {
        $entry = iconv('Windows-1250', 'UTF-8', $entry);
    }
);

For static files like pdfs, Word docs, etc. just use Express's static function in your config:

// Express config
var app = express().configure(function () {
    this.use('/public', express.static('public')); // <-- This right here
});

And then just put all your files inside that 'public' folder, for example:

/public/docs/my_word_doc.docx

And then a regular old link will allow the user to download it:

<a href="public/docs/my_word_doc.docx">My Word Doc</a>

In fact, your data is not well design. You'd better use something like :

$scope.steps = [
    {stepName: "companyName", isComplete: true},
    {stepName: "businessType", isComplete: true},
    {stepName: "physicalAddress", isComplete: true}
];

Then it is easy to do what you want :

<div ng-repeat="step in steps">
 Step {{step.stepName}} status : {{step.isComplet}}
</div>

Example: http://jsfiddle.net/rX7ba/

You can't do it with the HTML5 input type. There are many libs available to do it, you can use momentjs or some other jQuery UI components for the best outcome.

I like Andrew's suggestion, and in fact the CSS rule only needs to be:

:checked + label {
   font-weight: bold;
}

I like to rely on implicit association of the label and the input element, so I'd do something like this:

<label>
   <input type="checkbox"/>
   <span>Bah</span>
</label>

with CSS:

:checked + span {
    font-weight: bold;
}

Example: http://jsfiddle.net/wrumsby/vyP7c/

Just adding another idea you could use a child selector to get immediate children

document.querySelectorAll(".parent > .child1");

should return all the immediate children with class .child1

While the solutions here are workable, more recent technology has made for what I think is a better solution. CSS Grid Layout allows us to structure a more elegant solution.

The CSS below provides a 2-column "settings" structure, where the first column is expected to be a right-aligned label, followed by some content in the second column. More complicated content can be presented in the second column by wrapping it in a <div>.

[As a side-note: I use CSS to add the ':' that trails each label, as this is a stylistic element - my preference.]

/* CSS */_x000D_
_x000D_
div.settings {_x000D_
    display:grid;_x000D_
    grid-template-columns: max-content max-content;_x000D_
    grid-gap:5px;_x000D_
}_x000D_
div.settings label       { text-align:right; }_x000D_
div.settings label:after { content: ":"; }

<!-- HTML -->_x000D_
_x000D_
<div class="settings">_x000D_
    <label>Label #1</label>_x000D_
    <input type="text" />_x000D_
_x000D_
    <label>Long Label #2</label>_x000D_
    <span>Display content</span>_x000D_
_x000D_
    <label>Label #3</label>_x000D_
    <input type="text" />_x000D_
</div>

I need to somehow query Google and ask: Is this access token valid for [email protected]?

No. All you need is request standard login with Federated Login for Google Account Users from your API domain. And only after that you could compare "persistent user ID" with one you have from 'public interface'.

The value of realm is used on the Google Federated Login page to identify the requesting site to the user. It is also used to determine the value of the persistent user ID returned by Google.

So you need be from same domain as 'public interface'.

And do not forget that user needs to be sure that your API could be trusted ;) So Google will ask user if it allows you to check for his identity.

Updates regarding answers suggesting using The Apache Commons Lang's: StringEscapeUtils.unescapeJava() - it was deprecated,

Deprecated. as of 3.6, use commons-text StringEscapeUtils instead

The replacement is Apache Commons Text's StringEscapeUtils.unescapeJava()

I just had the same issue with Netbeans 8.2 and trying to connect to mySQL server on a Mac OS machine. The only thing that worked for me was to add the following to the url of the connection string: &serverTimezone=UTC (or if you are connecting via Hibernate.cfg.xml then escape the & as &) Not surprisingly I found the solution on this stack overflow post also:

MySQL JDBC Driver 5.1.33 - Time Zone Issue

Best Regards, Claudio

The correct answer, from all above, is to run the commands below:

sudo cp /etc/kubernetes/admin.conf $HOME/

sudo chown $(id -u):$(id -g) $HOME/admin.conf

export KUBECONFIG=$HOME/admin.conf

Put the elements which you want to shift to the centre within this div tag.

<div class="col d-flex justify-content-center">
</div>

You can use unset:

unset($array['key-here']);

Example:

$array = array("key1" => "value1", "key2" => "value2");
print_r($array);

unset($array['key1']);
print_r($array);

unset($array['key2']);
print_r($array);

Output:

Array
(
    [key1] => value1
    [key2] => value2
)
Array
(
    [key2] => value2
)
Array
(
)

Found the solution:

I was uploading the build, Every activity went well except “Authenticating with the iTunes store”.

I disconnected my LAN cable and Connected my MAC with my mobile hotspot. and authentication problem was solved. If you have a limited internet plan then as soon as you pass authentication stage, again connect your LAN so that it will upload the app from you LAN cable's internet connection.

It happens because of not very straight forward Servlet specification. If you are working with a native HttpServletRequest implementation you cannot get both the URL encode body and the parameters. Spring does some workarounds, which make it even more strange and nontransparent.

In such cases Spring (version 3.2.4) re-renders a body for you using data from the getParameterMap() method. It mixes GET and POST parameters and breaks the parameter order. The class, which is responsible for the chaos is ServletServerHttpRequest. Unfortunately it cannot be replaced, but the class StringHttpMessageConverter can be.

The clean solution is unfortunately not simple:

1. Replacing StringHttpMessageConverter. Copy/Overwrite the original class adjusting method readInternal().
2. Wrapping HttpServletRequest overwriting getInputStream(), getReader() and getParameter*() methods.

In the method StringHttpMessageConverter#readInternal following code must be used:

    if (inputMessage instanceof ServletServerHttpRequest) {
        ServletServerHttpRequest oo = (ServletServerHttpRequest)inputMessage;
        input = oo.getServletRequest().getInputStream();
    } else {
        input = inputMessage.getBody();
    }

Then the converter must be registered in the context.

<mvc:annotation-driven>
    <mvc:message-converters register-defaults="true/false">
        <bean class="my-new-converter-class"/>
   </mvc:message-converters>
</mvc:annotation-driven>

The step two is described here: Http Servlet request lose params from POST body after read it once

this in an object that you can read, write, overWrite and delete cookies.

var cookie = {
    write : function (cname, cvalue, exdays) {
        var d = new Date();
        d.setTime(d.getTime() + (exdays*24*60*60*1000));
        var expires = "expires="+d.toUTCString();
        document.cookie = cname + "=" + cvalue + "; " + expires;
    },
    read : function (name) {
        if (document.cookie.indexOf(name) > -1) {
            return document.cookie.split(name)[1].split("; ")[0].substr(1)
        } else {
            return "";
        }
    },
    delete : function (cname) {
        var d = new Date();
        d.setTime(d.getTime() - 1000);
        var expires = "expires="+d.toUTCString();
        document.cookie = cname + "=; " + expires;
    }
};

Short Answer:

lower-cased words with a hyphen as separator

Long Answer:

What is the purpose of a URL?

If pointing to an address is the answer, then a shortened URL is also doing a good job. If we don't make it easy to read and maintain, it won't help developers and maintainers alike. They represent an entity on the server, so they must be named logically.

Google recommends using hyphens

Consider using punctuation in your URLs. The URL http://www.example.com/green-dress.html is much more useful to us than http://www.example.com/greendress.html. We recommend that you use hyphens (-) instead of underscores (_) in your URLs.

Coming from a programming background, camelCase is a popular choice for naming joint words.

But RFC 3986 defines URLs as case-sensitive for different parts of the URL. Since URLs are case sensitive, keeping it low-key (lower cased) is always safe and considered a good standard. Now that takes a camel case out of the window.

Source: https://metamug.com/article/rest-api-naming-best-practices.html#word-delimiters

Like Unix shells, PowerShell supports > redirects with most of the variations known from Unix, including 2>&1 (though weirdly, order doesn't matter - 2>&1 > file works just like the normal > file 2>&1).

Like most modern Unix shells, PowerShell also has a shortcut for redirecting both standard error and standard output to the same device, though unlike other redirection shortcuts that follow pretty much the Unix convention, the capture all shortcut uses a new sigil and is written like so: *>.

So your implementation might be:

& myjob.bat *>> $logfile

With new Android 11 you can debug your apps over WiFi without using an USB cable at all.

Quoting from Android Studio User Guide

Connect to a device over Wi-Fi (Android 11+)

Android 11 and higher support deploying and debugging your app wirelessly from your workstation using Android Debug Bridge (adb). For example, you can deploy your debuggable app to multiple remote devices without physically connecting your device via USB. This eliminates the need to deal with common USB connection issues, such as driver installation.

To use wireless debugging, you need to pair your device to your workstation using a pairing code. Your workstation and device must be connected to the same wireless network. To connect to your device, follow these steps:

1. On your workstation, update to the latest version of the SDK Platform-Tools.
2. On the device, enable developer options.
3. Enable the Wireless debugging option.
4. On the dialog that asks Allow wireless debugging on this network?, click Allow.
5. Select Pair device with pairing code. Take note of the pairing code, IP address, and port number displayed on the device (see image).
6. On your workstation, open a terminal and navigate to android_sdk/platform-tools.
7. Run adb pair ipaddr:port. Use the IP address and port number from step 5.
8. When prompted, enter the pairing code that you received in step 5. A message indicates that your device has been successfully paired.

    none
    Enter pairing code: 482924
    Successfully paired to 192.168.1.130:37099 [guid=adb-235XY] 

9. (For Linux or Microsoft Windows only) Run adb connect ipaddr:port. Use the IP address and port under Wireless debugging.

Installing Crontab on Ubuntu

sudo apt-get update

We download the crontab file to the root

wget https://pypi.python.org/packages/47/c2/d048cbe358acd693b3ee4b330f79d836fb33b716bfaf888f764ee60aee65/crontab-0.20.tar.gz

Unzip the file crontab-0.20.tar.gz

tar xvfz crontab-0.20.tar.gz

Login to a folder crontab-0.20

cd crontab-0.20*

Installation order

python setup.py install

See also here:.. http://www.syriatalk.im/crontab.html

How did you upload those images; via FTP or through WP uploader? You have to upload images THROUGH WP uploader in order to show them in the image library.

Just use dynamic as the argument:

var list = new List<dynamic>();

For those who don't care about breaking compatibility with PHP < 5.4, I'd suggest using type hinting to make a cleaner implementation.

function call_with_hello_and_append_world( callable $callback )
{
     // No need to check $closure because of the type hint
     return $callback( "hello" )."world";
}

function append_space( $string )
{
     return $string." ";
}

$output1 = call_with_hello_and_append_world( function( $string ) { return $string." "; } );
var_dump( $output1 ); // string(11) "hello world"

$output2 = call_with_hello_and_append_world( "append_space" );
var_dump( $output2 ); // string(11) "hello world"

$old_lambda = create_function( '$string', 'return $string." ";' );
$output3 = call_with_hello_and_append_world( $old_lambda );
var_dump( $output3 ); // string(11) "hello world"

For me following was working:

var completionHandler:((Float)->Void)!

Here is a way to calculate memory usage of currently running application:

public static long getUsedMemorySize() {

    long freeSize = 0L;
    long totalSize = 0L;
    long usedSize = -1L;
    try {
        Runtime info = Runtime.getRuntime();
        freeSize = info.freeMemory();
        totalSize = info.totalMemory();
        usedSize = totalSize - freeSize;
    } catch (Exception e) {
        e.printStackTrace();
    }
    return usedSize;

}

The rules in your .gitignore file only apply to untracked files. Since the files under that directory were already committed in your repository, you have to unstage them, create a commit, and push that to GitHub:

git rm -r --cached some-directory
git commit -m 'Remove the now ignored directory "some-directory"'
git push origin master

You can't delete the file from your history without rewriting the history of your repository - you shouldn't do this if anyone else is working with your repository, or you're using it from multiple computers. If you still want to do that, you can use git filter-branch to rewrite the history - there is a helpful guide to that here.

Additionally, note the output from git rm -r --cached some-directory will be something like:

rm 'some-directory/product/cache/1/small_image/130x130/small_image.jpg'
rm 'some-directory/product/cache/1/small_image/135x/small_image.jpg'
rm 'some-directory/.htaccess'
rm 'some-directory/logo.jpg'

The rm is feedback from git about the repository; the files are still in the working directory.

You don't even need the float:left;

It seems the default behavior is to render one below the other, if it doesn't happen it's because they are inheriting some style from above.

CSS:

#wrapper{
    margin-left:auto;
    margin-right:auto;
    height:auto; 
    width:auto;
}
</style>

HTML:

<div id="wrapper">
    <div id="inner1">inner1</div>
    <div id="inner2">inner2</div>
</div>

We can have this in 2 ways,

Either have 2 form submissions within the same View and having 2 Action methods at the controller but you will need to have the required fields to be submitted with the form to be placed within

ex is given here with code Multiple forms in view asp.net mvc with multiple submit buttons

Or

Have 2 or multiple submit buttons say btnSubmit1 and btnSubmit2 and check on the Action method which button was clicked using the code

if (Request.Form["btnSubmit1"] != null)
{
 //
}
if (Request.Form["btnSubmit2"] != null)
{
 //
}

Forward declare class B and swap order of A and B definitions: 1st B and 2nd A. You can not call methods of forward declared B class.

If you are using Theme then you can the below Syntax

Yii::app()->theme->baseUrl

include CSS File :

<link href="<?php echo Yii::app()->theme->baseUrl;?>/css/bootstrap.css" type="text/css" rel="stylesheet" media="all">

Include JS File

<script src="<?php echo Yii::app()->theme->baseUrl;?>/js/jquery-2.2.3.min.js"></script>

If you are not using theme

Yii::app()->request->baseUrl

Use Like this

<link href="<?php echo Yii::app()->request->baseUrl; ?>/css/bootstrap.css" type="text/css" rel="stylesheet" media="all">
<script src="<?php echo Yii::app()->request->baseUrl; ?>/js/jquery-2.2.3.min.js"></script>

Swift - https://github.com/nicklockwood/SwiftFormat

It provides Xcode Extension as well as CLI option.

If this is your detail.html I don't see where do you load detail.js? Maybe this

<script src="js/index.js"></script>

should be this

<script src="js/detail.js"></script>

?

Try like this:

this.notifyDataSetChanged();

instead of:

adapter.notifyDataSetChanged();

You have to notifyDataSetChanged() to the ListView not to the adapter class.

A solution that works with all possible line endings including mixed ones and keeping empty lines as well can be achieved using two replaces and one split as follows

text.replace(/\r\n/g, "\r").replace(/\n/g, "\r").split(/\r/);

some code to test it

  var CR = "\x0D";  //   \r
  var LF = "\x0A";  //   \n

  var mixedfile = "00" + CR + LF +            // 1 x win
                  "01" + LF +                 // 1 x linux
                  "02" + CR +                 // 1 x old mac
                  "03" + CR + CR +            // 2 x old mac
                  "05" + LF + LF +            // 2 x linux
                  "07" + CR + LF + CR + LF +  // 2 x win
                  "09";

  function showarr (desc, arr)
  {
     console.log ("// ----- " + desc);
     for (var ii in arr)
        console.log (ii + ") [" + arr[ii] +  "] (len = " + arr[ii].length + ")");
  }

  showarr ("using 2 replace + 1 split", 
           mixedfile.replace(/\r\n/g, "\r").replace(/\n/g, "\r").split(/\r/));

and the output

  // ----- using 2 replace + 1 split
  0) [00] (len = 2)
  1) [01] (len = 2)
  2) [02] (len = 2)
  3) [03] (len = 2)
  4) [] (len = 0)
  5) [05] (len = 2)
  6) [] (len = 0)
  7) [07] (len = 2)
  8) [] (len = 0)
  9) [09] (len = 2)

Garbage Collection in Java (and other languages/platforms as well) is a way for the java run-time environment (JRE) to reuse memory from java objects that are no longer needed. Simplistically, when the JRE initially starts up it asks the Operating System (O/S) for a certain amount of memory. As the JRE runs your application(s) it uses that memory. When your application is done using that memory, the JRE's "Garbage Collector" comes along and reclaims that memory for use by different parts of your existing application(s). The JRE's "Garbage Collector" is a background task that is always running and tries to pick times when the system is idle to go on its garbage runs.

A real world analogy would be the garbage men that come to your house and pick up your recyclable garbage... eventually, its reused in other ways by yourself and/or other people.

Well, you didn't specify which version of .Net you're using.

Assuming you have 3.5, another way is the ElementAt method:

var e = enumerable.ElementAt(0);

Use:

if [[ `command --help` ]]; then
  echo "This command exists"
else
  echo "This command does not exist";
fi

Put in a working switch, such as "--help" or "-v" in the if check: if [[ command --help ]]; then

What you're looking for is technically known as currying.

function getMyCallback(randomValue)
{
    return function(otherParam)
    {
        return randomValue * otherParam //or whatever it is you are doing.
    }

}

var myCallback = getMyCallBack(getRand())

alert(myCallBack(1));
alert(myCallBack(2));

The above isn't exactly a curried function but it achieves the result of maintaining an existing value without adding variables to the global namespace or requiring some other object repository for it.

OpenSSL is quite difficult. It's easy to accidentally throw away all your security by not doing negotiation exactly right. (Heck, I've been personally bitten by a bug where curl wasn't reading the OpenSSL alerts exactly right, and couldn't talk to some sites.)

If you really want quick and simple, put stud in front of your program an call it a day. Having SSL in a different process won't slow you down: http://vincent.bernat.im/en/blog/2011-ssl-benchmark.html

You could serialize the image into a Data URI. There's a tutorial in this blog post. That will produce a string you can store in local storage. Then on the next page, use the data uri as the source of the image.

The simple way is using System.Diagnostics.Debug.WriteLine()

Your can then read what you're writing to the output by clicking the menu "DEBUG" -> "Windows" -> "Output".

Apparently, some versions of the shell can also emit this message when the final line of your script lacks a newline.

With Java 8, you could use a primitive stream:

if (IntStream.of(12, 16, 19).anyMatch(i -> i == x))

but this may have a slight overhead (or not), depending on the number of comparisons.

This syntax is available in Oracle 12c:

select * from some_table fetch first 1 row only;
select * from some_table fetch first 1 rows only;
select * from some_table fetch first 10 row only;
select * from some_table fetch first 10 rows only;

^^I just wanted to demonstrate that either row or rows (plural) can be used regardless of the plurality of the desired number of rows.)

strip does nothing but, removes the the whitespace in your string. If you want to remove the extra whitepace from front and back of your string, you can use strip.

The example string which can illustrate that is this:

In [2]: x = "something \t like     \t this"
In [4]: x.split('\t')
Out[4]: ['something ', ' like     ', ' this']

See, even after splitting with \t there is extra whitespace in first and second items which can be removed using strip in your code.

Here is how I made monthly page in similar manner as Fernando:

1. I wrote manually on each page number of the month and named that place as ThisMonth. Note that you can do this only before you make copies of the sheet. After copying Excel doesn't allow you to use same name, but with sheet copy it does it still. This solution works also without naming.
2. I added number of weeks in the month to location C12. Naming is fine also.

3. I made five weeks on every page and on fifth week I made function

     =IF(C12=5,DATE(YEAR(B48),MONTH(B48),DAY(B48)+7),"")
   

   that empties fifth week if this month has only four weeks. C12 holds the number of weeks.

4. ...
5. I created annual Excel, so I had 12 sheets in it: one for each month. In this example name of the sheet is "Month". Note that this solutions works also with the ODS file standard except you need to change all spaces as "_" characters.
6. I renamed first "Month" sheet as "Month (1)" so it follows the same naming principle. You could also name it as "Month1" if you wish, but "January" would require a bit more work.

7. Insert following function on the first day field starting sheet #2:

    =INDIRECT(CONCATENATE("'Month (",ThisMonth-1,")'!B15"))+INDIRECT(CONCATENATE("'Month (",ThisMonth-1,")'!C12"))*7
   

   So in another word, if you fill four or five weeks on the previous sheet, this calculates date correctly and continues from correct date.

As Adrian said, the plugins are going to work the same way. There are three basic parts you're going to need:

1: Event handler for 'contextmenu' event:

$(document).bind("contextmenu", function(event) {
    event.preventDefault();
    $("<div class='custom-menu'>Custom menu</div>")
        .appendTo("body")
        .css({top: event.pageY + "px", left: event.pageX + "px"});
});

Here, you could bind the event handler to any selector that you want to show a menu for. I've chosen the entire document.

2: Event handler for 'click' event (to close the custom menu):

$(document).bind("click", function(event) {
    $("div.custom-menu").hide();
});

3: CSS to control the position of the menu:

.custom-menu {
    z-index:1000;
    position: absolute;
    background-color:#C0C0C0;
    border: 1px solid black;
    padding: 2px;
}

The important thing with the CSS is to include the z-index and position: absolute

It wouldn't be too tough to wrap all of this in a slick jQuery plugin.

You can see a simple demo here: http://jsfiddle.net/andrewwhitaker/fELma/

On Windows you can query the precise state of any port on any network-adapter using: GetExtendedTcpTable

You can filter it to only those related to your process, etc and do as you wish periodically monitoring as needed. This is "an alternative" approach.

You could also duplicate the socket handle and set up an IOCP/Overlapped i/o wait on the socket and monitor it that way as well.

A bit late but I got something similar that I'm busy building and here is the code to get current location - be sure to use local server to test.

Include relevant scripts from CDN:

    <script type="text/javascript" src="https://maps.googleapis.com/maps/api/js?key=YOUR_API_KEY&signed_in=true&callback=initMap">

HTML

<div id="map"></div>

CSS

html, body {
    height: 100%;
    margin: 0;
    padding: 0;
}
#map {
    height: 100%;
}

JS

var map = new google.maps.Map(document.getElementById('map'), {
    center: {lat: -34.397, lng: 150.644},
    zoom: 6
});
var infoWindow = new google.maps.InfoWindow({map: map});

// Try HTML5 geolocation.
if (navigator.geolocation) {
    navigator.geolocation.getCurrentPosition(function(position) {
        var pos = {
            lat: position.coords.latitude,
            lng: position.coords.longitude
        };

        infoWindow.setPosition(pos);
        infoWindow.setContent('Location found.');
        map.setCenter(pos);
    }, function() {
        handleLocationError(true, infoWindow, map.getCenter());
    });
} else {
    // Browser doesn't support Geolocation
    handleLocationError(false, infoWindow, map.getCenter());
}

function handleLocationError(browserHasGeolocation, infoWindow, pos) {
    infoWindow.setPosition(pos);
    infoWindow.setContent(browserHasGeolocation ?
                          'Error: The Geolocation service failed.' :
                          'Error: Your browser doesn\'t support geolocation.');
}

DEMO

https://jsfiddle.net/ToreanJoel/4ythpy02/

Settings for compiler

In the project where you want to #include the header file from another project, you will need to add the path of the header file into the Additional Include Directories section in the project configuration.

To access the project configuration:

1. Right-click on the project, and select Properties.
2. Select Configuration Properties->C/C++->General.
3. Set the path under Additional Include Directories.

How to include

To include the header file, simply write the following in your code:

#include "filename.h"

Note that you don't need to specify the path here, because you include the directory in the Additional Include Directories already, so Visual Studio will know where to look for it.

If you don't want to add every header file location in the project settings, you could just include a directory up to a point, and then #include relative to that point:

// In project settings
Additional Include Directories    ..\..\libroot

// In code
#include "lib1/lib1.h"    // path is relative to libroot
#include "lib2/lib2.h"    // path is relative to libroot

Setting for linker

If using static libraries (i.e. .lib file), you will also need to add the library to the linker input, so that at linkage time the symbols can be linked against (otherwise you'll get an unresolved symbol):

1. Right-click on the project, and select Properties.
2. Select Configuration Properties->Linker->Input
3. Enter the library under Additional Dependencies.

A corresponding cross for ✓ ✓ would be ✗ ✗ I think (Dingbats).

You must not use =. Simply use this:

export CATALINA_OPTS="-Xms512M -Xmx1024M"

What I use everywhere :

 Runtime.getRuntime().exec("pm clear me.myapp");

Executing above piece of code closes application and removes all databases and shared preferences

Just use the existing method.. .ToList();

   List<int> listArray = array.ToList();

KISS(KEEP IT SIMPLE SIR)

In short, they are equivalent. Let's have a history view:

(1) at first, the function looks like this.

    class MySubClass(MySuperClass):
        def __init__(self):
            MySuperClass.__init__(self)

(2) to make code more abstract (and more portable). A common method to get Super-Class is invented like:

    super(<class>, <instance>)

And init function can be:

    class MySubClassBetter(MySuperClass):
        def __init__(self):
            super(MySubClassBetter, self).__init__()

However requiring an explicit passing of both the class and instance break the DRY (Don't Repeat Yourself) rule a bit.

(3) in V3. It is more smart,

    super()

is enough in most case. You can refer to http://www.python.org/dev/peps/pep-3135/

private void alarmEventInsert(DriveDetail driveDetail, String vehicleRegNo, int organizationId) {

    final String ALARM_EVENT_INS_SQL = "INSERT INTO alarm_event (event_code,param1,param2,org_id,created_time) VALUES (?,?,?,?,?)";
    CachedConnection conn = JDatabaseManager.getConnection();
    PreparedStatement ps = null;
    ResultSet generatedKeys = null;
    try {
        ps = conn.prepareStatement(ALARM_EVENT_INS_SQL, ps.RETURN_GENERATED_KEYS);
        ps.setInt(1, driveDetail.getEventCode());
        ps.setString(2, vehicleRegNo);
        ps.setString(3, null);
        ps.setInt(4, organizationId);
        ps.setString(5, driveDetail.getCreateTime());
        ps.execute();
        generatedKeys = ps.getGeneratedKeys();
        if (generatedKeys.next()) {
            driveDetail.setStopDuration(generatedKeys.getInt(1));
        }
    } catch (SQLException e) {
        e.printStackTrace();
        logger.error("Error inserting into alarm_event : {}", e
                .getMessage());
        logger.info(ps.toString());
    } finally {
        if (ps != null) {
            try {

                if (ps != null)
                    ps.close();
            } catch (SQLException e) {
                logger.error("Error closing prepared statements : {}", e
                        .getMessage());
            }
        }
    }
    JDatabaseManager.freeConnection(conn);
}

If you install PyQt4 on Windows, files wind up here by default:

C:\Python27\Lib\site-packages\PyQt4*.*

but it also leaves a file here:

C:\Python27\Lib\site-packages\sip.pyd

If you copy the both the sip.pyd and PyQt4 folder into your virtualenv things will work fine.

For example:

mkdir c:\code
cd c:\code
virtualenv BACKUP
cd c:\code\BACKUP\scripts
activate

Then with windows explorer copy from C:\Python27\Lib\site-packages the file (sip.pyd) and folder (PyQt4) mentioned above to C:\code\BACKUP\Lib\site-packages\

Then back at CLI:

cd ..                 
(c:\code\BACKUP)
python backup.py

The problem with trying to launch a script which calls PyQt4 from within virtualenv is that the virtualenv does not have PyQt4 installed and it doesn't know how to reference the default installation described above. But follow these steps to copy PyQt4 into your virtualenv and things should work great.

First()

When you know that result contain more than 1 element expected and you should only the first element of sequence.

FirstOrDefault()

FirstOrDefault() is just like First() except that, if no element match the specified condition than it returns default value of underlying type of generic collection. It does not throw InvalidOperationException if no element found. But collection of element or a sequence is null than it throws an exception.

Pug (renamed from 'Jade') is a templating engine for full stack web app development. It provides a neat and clean syntax for writing HTML and maintains strict whitespace indentation (like Python). It has been implemented with JavaScript APIs. The language mainly supports two iteration constructs: each and while. 'for' can be used instead 'each'. Kindly consult the language reference here:

https://pugjs.org/language/iteration.html

Here is one of my snippets: each/for iteration in pug_screenshot

Use an infinite loop:

while True:
    print('Hello world!')

This certainly can apply to your start() function as well; you can exit the loop with either break, or use return to exit the function altogether, which also terminates the loop:

def start():
    print ("Welcome to the converter toolkit made by Alan.")

    while True:
        op = input ("Please input what operation you wish to perform. 1 for Fahrenheit to Celsius, 2 for meters to centimetres and 3 for megabytes to gigabytes")

        if op == "1":
            f1 = input ("Please enter your fahrenheit temperature: ")
            f1 = int(f1)

            a1 = (f1 - 32) / 1.8
            a1 = str(a1)

            print (a1+" celsius") 

        elif op == "2":
            m1 = input ("Please input your the amount of meters you wish to convert: ")
            m1 = int(m1)
            m2 = (m1 * 100)

            m2 = str(m2)
            print (m2+" m")

        if op == "3":
            mb1 = input ("Please input the amount of megabytes you want to convert")
            mb1 = int(mb1)
            mb2 = (mb1 / 1024)
            mb3 = (mb2 / 1024)

            mb3 = str(mb3)

            print (mb3+" GB")

        else:
            print ("Sorry, that was an invalid command!")

If you were to add an option to quit as well, that could be:

if op.lower() in {'q', 'quit', 'e', 'exit'}:
    print("Goodbye!")
    return

for example.

You want:

java -cp myJar.jar myClass

The Documentation gives the following example:

C:> java -classpath C:\java\MyClasses\myclasses.jar utility.myapp.Cool

you just use the :nth-child(num) in css for add the colspan like

 <style>
 div.table
  {
  display:table;
  width:100%;
  }
 div.table-row
  {
   display:table-row;
  }
 div.table-td
 {
  display:table-cell;
 }
 div.table-row:nth-child(1)
 {
  display:block;
 }
</style>
<div class="table>
    <div class="table-row">test</div>
    <div class="table-row">
      <div class="table-td">data1</div>
      <div class="table-td">data2</div>
    </div>
</div>

Here you can set hidden's value at onchange event of dropdown list :

$('#myDropDown').bind('change', function () {
  $('#myHidden').val('setted value');
});

your hidden and drop down list :

<input type="hidden" id="myHidden" />

<select id="myDropDown">
   <option value="opt 1">Option 1</option>
   <option value="opt 2">Option 2</option>
   <option value="opt 3">Option 3</option>
</ select>

What worked for me is to change the access of the Git repository from private to public.

This should not happen. Can you try doing this? Use the system properties and set the property as below:

Properties properties = System.getProperties();
// Setup mail server
properties.setProperty("mail.smtp.host", "10.101.3.229");

And if you have a port associated, then set this as well.

properties.setProperty("mail.smtp.port", "8080");

Manual:

• Go to your apple developer account and hit certificates
• Select devices from the left side
• Add the device name and its UDID. Close Xcode and hit automatic signing

Automatic:

• Attach your iPhone to Xcode. and run the app on that. Xcode will automatically create a profile.

There is an option in Postman if you download it from https://www.getpostman.com instead of the chrome store (most probably it has been introduced in the new versions and the chrome one will be updated later) not sure about the old ones.

In the settings, turn off the SSL certificate verification option

Be sure to remember to reactivate it afterwards, this is a security feature.

If you really want to use the chrome app, you could always add an exception to chrome for the url: Enter the url you would like to open in the chrome browser, you'll get a warning with a link at the bottom of the page to add an exception, which if you do, it will also allow postman to access your url. But the first option of using the postman stand-alone app is much better.

I hope this can help.

    $sql = "INSERT INTO   customer(FIELDS)VALUES(VALUES)";
    mysql_query($sql);
    if (mysql_errno())
    {
            echo "<script>alert('License already registered');location.replace('customerform.html');</script>";
    }   

From the MySQL 5.5 manual page:

LOCAL works only if your server and your client both have been configured to permit it. For example, if mysqld was started with --local-infile=0, LOCAL does not work. See Section 6.1.6, “Security Issues with LOAD DATA LOCAL”.

You should set the option:

local-infile=1

into your [mysql] entry of my.cnf file or call mysql client with the --local-infile option:

mysql --local-infile -uroot -pyourpwd yourdbname

You have to be sure that the same parameter is defined into your [mysqld] section too to enable the "local infile" feature server side.

It's a security restriction.

In case you're wondering about the performance of the different approaches, here are some timings:

In [1]: words = [str(i) for i in range(10000)]

In [2]: %timeit replaced = [w.replace('1', '<1>') for w in words]
100 loops, best of 3: 2.98 ms per loop

In [3]: %timeit replaced = map(lambda x: str.replace(x, '1', '<1>'), words)
100 loops, best of 3: 5.09 ms per loop

In [4]: %timeit replaced = map(lambda x: x.replace('1', '<1>'), words)
100 loops, best of 3: 4.39 ms per loop

In [5]: import re

In [6]: r = re.compile('1')

In [7]: %timeit replaced = [r.sub('<1>', w) for w in words]
100 loops, best of 3: 6.15 ms per loop

as you can see for such simple patterns the accepted list comprehension is the fastest, but look at the following:

In [8]: %timeit replaced = [w.replace('1', '<1>').replace('324', '<324>').replace('567', '<567>') for w in words]
100 loops, best of 3: 8.25 ms per loop

In [9]: r = re.compile('(1|324|567)')

In [10]: %timeit replaced = [r.sub('<\1>', w) for w in words]
100 loops, best of 3: 7.87 ms per loop

This shows that for more complicated substitutions a pre-compiled reg-exp (as in 9-10) can be (much) faster. It really depends on your problem and the shortest part of the reg-exp.

There are a lot of very good answers, but I just want to touch on one major difference between IE9 and IE < 9 when using event.button.

According to the old Microsoft specification for event.button the codes differ from the ones used by W3C. W3C considers only 3 cases:

1. Left mouse button is clicked - event.button === 1
2. Right mouse button is clicked - event.button === 3
3. Middle mouse button is clicked - event.button === 2

In older Internet Explorers however Microsoft are flipping a bit for the pressed button and there are 8 cases:

1. No button is clicked - event.button === 0 or 000
2. Left button is clicked - event.button === 1 or 001
3. Right button is clicked - event.button === 2 or 010
4. Left and right buttons are clicked - event.button === 3 or 011
5. Middle button is clicked - event.button === 4 or 100
6. Middle and left buttons are clicked - event.button === 5 or 101
7. Middle and right buttons are clicked - event.button === 6 or 110
8. All 3 buttons are clicked - event.button === 7 or 111

Despite the fact that this is theoretically how it should work, no Internet Explorer has ever supported the cases of two or three buttons simultaneously pressed. I am mentioning it because the W3C standard cannot even theoretically support this.

Steps:

1. Start your remote java application with debugging options as said in above post.
2. Configure Eclipse for remote debugging by specifying host and port.
3. Start remote debugging in Eclipse and wait for connection to succeed.
4. Setup breakpoint and debug.
5. If you want to debug from start of application use suspend=y , this will keep remote application suspended until you connect from eclipse.

See Step by Step guide on Java remote debugging for full details.

Jeff Bridgman is correct. All you need is
background: url('pic.jpg')
and this assumes that pic is in the same folder as your html.

Also, Roberto's answer works fine. Tested in Firefox, and IE. Thanks to Raptor for adding formatting that displays full picture fit to screen, and without scrollbars... In a folder f, on the desktop is this html and a picture, pic.jpg, using your userid. Make those substitutions in the below:

<html>
<head>
    <style>
        body {

        background: url('file:///C:/Users/userid/desktop/f/pic.jpg') no-repeat center center fixed;

        background-size: cover; /* for IE9+, Safari 4.1+, Chrome 3.0+, Firefox 3.6+ */
        -webkit-background-size: cover; /* for Safari 3.0 - 4.0 , Chrome 1.0 - 3.0 */
        -moz-background-size: cover; /* optional for Firefox 3.6 */ 
        -o-background-size: cover; /* for Opera 9.5 */
        margin: 0; /* to remove the default white margin of body */
        padding: 0; /* to remove the default white margin of body */
        overflow: hidden;
             }
    </style>
</head>
<body>
hello
</body>
</html>

new FileOutputStream(f) will create a file in most cases, but unfortunately you will get a FileNotFoundException

if the file exists but is a directory rather than a regular file, does not exist but cannot be created, or cannot be opened for any other reason

from Javadoc

I other word there might be plenty of cases where you would get FileNotFoundException meaning "Could not create your file", but you would not be able to find the reason of why the file creation failed.

A solution is to remove any call to the File API and use the Files API instead as it provides much better error handling. Typically replace any new FileOutputStream(f) with Files.newOutputStream(p).

In cases where you do need to use the File API (because you use an external interface using File for example), using Files.createFile(p) is a good way to make sure your file is created properly and if not you would know why it didn't work. Some people commented above that this is redundant. It is true, but you get better error handling which might be necessary in some cases.

http://v4-alpha.getbootstrap.com/layout/responsive-utilities/

You now have to define the size of what is being hidden as so

.hidden-xs-down

Will hide anythinging from xs and smaller, only xs

.hidden-xs-up

Will hide everything

Just struggled with Visutal Studio 2017 Community Edition - none of above options worked for me. In my case what i had to do was:

1. Run MySQL Installer and install/upgrade: Connector/NET and MySQL for Visual Studio to current versions (8.0.17 and 1.2.8 at the time)

2. Run Visual Studio Installer > Visual Studio Community 2017 > Modify > Individual components > add .NET Framework Targeting Packs for 4.6.2, 4.7, 4.7.1 and 4.7.2

3. Reopen project and change project target platform to 4.7.2

4. Remove all MySQL-related nuGET packages and references

5. Install following nuGET packages: EntityFramework, MySql.Data.Entity, Mysql.Data.Entities

6. Upgrade following nuGET packages: MySql.Data, BouncyCastle nad Google.Protobuf (for some reason there is an update available just after install)

Starting from root node and moving downwards if you find any node that has either p or q as its direct child then it is the LCA. (edit - this should be if p or q is the node's value, return it. Otherwise it will fail when one of p or q is a direct child of the other.)

Else if you find a node with p in its right(or left) subtree and q in its left(or right) subtree then it is the LCA.

The fixed code looks like:

treeNodePtr findLCA(treeNodePtr root, treeNodePtr p, treeNodePtr q) {

        // no root no LCA.
        if(!root) {
                return NULL;
        }

        // if either p or q is the root then root is LCA.
        if(root==p || root==q) {
                return root;
        } else {
                // get LCA of p and q in left subtree.
                treeNodePtr l=findLCA(root->left , p , q);

                // get LCA of p and q in right subtree.
                treeNodePtr r=findLCA(root->right , p, q);

                // if one of p or q is in leftsubtree and other is in right
                // then root it the LCA.
                if(l && r) {
                        return root;
                }
                // else if l is not null, l is LCA.
                else if(l) {
                        return l;
                } else {
                        return r;
                }
        }
}

The below code fails when either is the direct child of other.

treeNodePtr findLCA(treeNodePtr root, treeNodePtr p, treeNodePtr q) {

        // no root no LCA.
        if(!root) {
                return NULL;
        }

        // if either p or q is direct child of root then root is LCA.
        if(root->left==p || root->left==q || 
           root->right ==p || root->right ==q) {
                return root;
        } else {
                // get LCA of p and q in left subtree.
                treeNodePtr l=findLCA(root->left , p , q);

                // get LCA of p and q in right subtree.
                treeNodePtr r=findLCA(root->right , p, q);

                // if one of p or q is in leftsubtree and other is in right
                // then root it the LCA.
                if(l && r) {
                        return root;
                }
                // else if l is not null, l is LCA.
                else if(l) {
                        return l;
                } else {
                        return r;
                }
        }
}

Code In Action

Get all classes by part of Namespace name in just one row:

var allClasses = Assembly.GetExecutingAssembly().GetTypes().Where(a => a.IsClass && a.Namespace != null && a.Namespace.Contains(@"..your namespace...")).ToList();

DataNucleus JPA that I use also has a way of doing this in its docs. No need for Spring, or ugly implementation of PersistenceUnitInfo.

Simply do as follows

import org.datanucleus.metadata.PersistenceUnitMetaData;
import org.datanucleus.api.jpa.JPAEntityManagerFactory;

PersistenceUnitMetaData pumd = new PersistenceUnitMetaData("dynamic-unit", "RESOURCE_LOCAL", null);
pumd.addClassName("mydomain.test.A");
pumd.setExcludeUnlistedClasses();
pumd.addProperty("javax.persistence.jdbc.url", "jdbc:h2:mem:nucleus");
pumd.addProperty("javax.persistence.jdbc.user", "sa");
pumd.addProperty("javax.persistence.jdbc.password", "");
pumd.addProperty("datanucleus.schema.autoCreateAll", "true");

EntityManagerFactory emf = new JPAEntityManagerFactory(pumd, null);

Raw t-sql is limited to CHARINDEX(), PATINDEX(), REPLACE(), and SUBSTRING() for string manipulation. But with sql server 2005 and later you can set up user defined functions that run in .Net, which means setting up a string.format() UDF shouldn't be too tough.

when you click div with addproduct class one event is fired for that particular element, not five. you're doing something wrong in you code if event is fired 5 times.

Firstly, the below method doesn't compile as it is missing the return type and it should be Long.MAX_VALUE in place of Long.Max_value.

public static boolean isBiggerThanMaxLong(long value) {
      return value > Long.Max_value;
}

The above method can never return true as you are comparing a long value with Long.MAX_VALUE , see the method signature you can pass only long there.Any long can be as big as the Long.MAX_VALUE, it can't be bigger than that.

You can try something like this with BigInteger class :

public static boolean isBiggerThanMaxLong(BigInteger l){
    return l.compareTo(BigInteger.valueOf(Long.MAX_VALUE))==1?true:false;
}

The below code will return true :

BigInteger big3 = BigInteger.valueOf(Long.MAX_VALUE).
                  add(BigInteger.valueOf(Long.MAX_VALUE));
System.out.println(isBiggerThanMaxLong(big3)); // prints true

envsubst was new to me. Fantastic.

For the record, using a heredoc is a great way to template a conf file.

STATUS_URI="/hows-it-goin";  MONITOR_IP="10.10.2.15";

cat >/etc/apache2/conf.d/mod_status.conf <<EOF
<Location ${STATUS_URI}>
    SetHandler server-status
    Order deny,allow
    Deny from all
    Allow from ${MONITOR_IP}
</Location>
EOF

Your code works for me

$date = '15-12-2016';
$nameOfDay = date('D', strtotime($date));
echo $nameOfDay;

Use l instead of D, if you prefer the full textual representation of the name

You must make sure that the input string has enough space to hold all the padding characters. Try this:

char hello[11] = "Hello";
StringPadRight(hello, 10, "0");

Note that I allocated 11 bytes for the hello string to account for the null terminator at the end.

Instead you can use before insert and get max pkid for the particular table and then update the maximium pkid table record.

You just need to specify that you want to delete the entries from the posts table:

DELETE posts
FROM posts
INNER JOIN projects ON projects.project_id = posts.project_id
WHERE projects.client_id = :client_id

EDIT: For more information you can see this alternative answer

I use volatile fields when said field is ONLY UPDATED by its owner thread and the value is only read by other threads, you can think of it as a publish/subscribe scenario where there are many observers but only one publisher. However if those observers must perform some logic based on the value of the field and then push back a new value then I go with Atomic* vars or locks or synchronized blocks, whatever suits me best. In many concurrent scenarios it boils down to get the value, compare it with another one and update if necessary, hence the compareAndSet and getAndSet methods present in the Atomic* classes.

Check the JavaDocs of the java.util.concurrent.atomic package for a list of Atomic classes and an excellent explanation of how they work (just learned that they are lock-free, so they have an advantage over locks or synchronized blocks)

Instead of an annoying confirmation popup, it would be nice to delay leaving just a bit (matter of milliseconds) to manage successfully posting the unsaved data to the server, which I managed for my site using writing dummy text to the console like this:

window.onbeforeunload=function(e){
  // only take action (iterate) if my SCHEDULED_REQUEST object contains data        
  for (var key in SCHEDULED_REQUEST){   
    postRequest(SCHEDULED_REQUEST); // post and empty SCHEDULED_REQUEST object
    for (var i=0;i<1000;i++){
      // do something unnoticable but time consuming like writing a lot to console
      console.log('buying some time to finish saving data'); 
    };
    break;
  };
}; // no return string --> user will leave as normal but data is send to server

Edit: See also Synchronous_AJAX and how to do that with jquery

Default behaviour of PowerShell is just to dump everything that falls out of a pipeline without being picked up by another pipeline element or being assigned to a variable (or redirected) into Out-Host. What Out-Host does is obviously host-dependent.

Just letting things fall out of the pipeline is not a substitute for Write-Host which exists for the sole reason of outputting text in the host application.

If you want output, then use the Write-* cmdlets. If you want return values from a function, then just dump the objects there without any cmdlet.

I found a solution

1. Open Windows Network Connections
2. Right click on VirtualBox Host only adapter that created
3. Choose properties
4. Check "VirtualBox NDIS6 Bridged Networking driver"
5. disable and Enable the adapter

The CSS and Script bundling should work regardless if .NET is running 4.0 or 4.5. I am running .NET 4.0 and it works fine for me. However in order to get the minification and bundling behavior to work your web.config must be set to not be running in debug mode.

<compilation debug="false" targetFramework="4.0">

Take this bundle for jQuery UI example in the _Layout.cshtml file.

@Styles.Render("~/Content/themes/base/css")

If I run with debug="true" I get the following HTML.

<link href="/Content/themes/base/jquery.ui.core.css" rel="stylesheet"/>
<link href="/Content/themes/base/jquery.ui.resizable.css" rel="stylesheet"/>
<link href="/Content/themes/base/jquery.ui.selectable.css" rel="stylesheet"/>
<link href="/Content/themes/base/jquery.ui.accordion.css" rel="stylesheet"/>
<link href="/Content/themes/base/jquery.ui.autocomplete.css" rel="stylesheet"/>
<link href="/Content/themes/base/jquery.ui.button.css" rel="stylesheet"/>
<link href="/Content/themes/base/jquery.ui.dialog.css" rel="stylesheet"/>
<link href="/Content/themes/base/jquery.ui.slider.css" rel="stylesheet"/>
<link href="/Content/themes/base/jquery.ui.tabs.css" rel="stylesheet"/>
<link href="/Content/themes/base/jquery.ui.datepicker.css" rel="stylesheet"/>
<link href="/Content/themes/base/jquery.ui.progressbar.css" rel="stylesheet"/>
<link href="/Content/themes/base/jquery.ui.theme.css" rel="stylesheet"/>

But if I run with debug="false". I'll get this instead.

<link href="/Content/themes/base/css?v=myqT7npwmF2ABsuSaHqt8SCvK8UFWpRv7T4M8r3kiK01" rel="stylesheet"/>

This is a feature so you can easily debug problems with your Script and CSS files. I'm using the MVC4 RTM.

If you think it might be an MVC dependency problem, I'd recommend going into Nuget and removing all of your MVC related packages, and then search for the Microsoft.AspNet.Mvc package and install it. I'm using the most recent version and it's coming up as v.4.0.20710.0. That should grab all the dependencies you need.

Also if you used to be using MVC3 and are now trying to use MVC4 you'll want to go into your web.config(s) and update their references to point to the 4.0 version of MVC. If you're not sure, you can always create a fresh MVC4 app and copy the web.config from there. Don't forget the web.config in your Views/Areas folders if you do.

UPDATE: I've found that what you need to have is the Nuget package Microsoft.AspNet.Web.Optimization installed in your project. It's included by default in an MVC4 RTM app regardless if you specify the target framework as 4.5 or 4.0. This is the namespace that the bundling classes are included in, and doesn't appear to be dependent on the framework. I've deployed to a server that does not have 4.5 installed and it still works as expected for me. Just make sure the DLL gets deployed with the rest of your app.

I had a problem with runAllManagedModulesForAllRequests, code 0x80070021 and http error 500.19 and managed to solve it

With command prompt launched as Admnistrator, go to : C:\Windows\Microsoft.NET\Framework64\v4.0.30319>

execute

aspnet_regiis -i

bingo!

pushing commits, whether empty or not, causes eventual git hooks to be triggered. This can do either nothing or have world shattering consequences.

Maybe someone can use it. Find all files which were modified within a certain time frame recursively, just run:

find . -type f -newermt "2013-06-01" \! -newermt "2013-06-20"

I use this version

<style><%@include file="/WEB-INF/css/style.css"%></style>

You can't pass a parameter in a @selector().

It looks like you're trying to implement a callback. The best way to do that would be something like this:

[object setCallbackObject:self withSelector:@selector(myMethod:)];

Then in your object's setCallbackObject:withSelector: method: you can call your callback method.

-(void)setCallbackObject:(id)anObject withSelector:(SEL)selector {
    [anObject performSelector:selector];
}

Adding custom button to navigation bar ( with image for buttonItem and specifying action method (void)openView{} and).

UIButton *button = [UIButton buttonWithType:UIButtonTypeCustom];
button.frame = CGRectMake(0, 0, 32, 32);
[button setImage:[UIImage imageNamed:@"settings_b.png"] forState:UIControlStateNormal];
[button addTarget:self action:@selector(openView) forControlEvents:UIControlEventTouchUpInside];

UIBarButtonItem *barButton=[[UIBarButtonItem alloc] init];
[barButton setCustomView:button];
self.navigationItem.rightBarButtonItem=barButton;

[button release];
[barButton release];

Here's example with simple object exporting.

var MyScreen = {

    /* ... */

    width : function (percent){

        return window.innerWidth / 100 * percent

    }

    height : function (percent){

        return window.innerHeight / 100 * percent

    }


};

export default MyScreen

In main file (Use when you don't want and don't need to create new instance) and it is not global you will import this only when it needed :

import MyScreen from "./module/screen";
console.log( MyScreen.width(100) );

May be I come later to answer but right now I'm facing with this... if helps there are one more solution (the way i solved it).

    var query2 = (
    from users in Repo.T_Benutzer
    join mappings in Repo.T_Benutzer_Benutzergruppen on mappings.BEBG_BE equals users.BE_ID into tmpMapp
    join groups in Repo.T_Benutzergruppen on groups.ID equals mappings.BEBG_BG into tmpGroups
    from mappings in tmpMapp.DefaultIfEmpty()
    from groups in tmpGroups.DefaultIfEmpty()
    select new
    {
         UserId = users.BE_ID
        ,UserName = users.BE_User
        ,UserGroupId = mappings.BEBG_BG
        ,GroupName = groups.Name
    }

);

By the way, I tried using the Stefan Steiger code which also helps but it was slower as hell.

Here you go this should give you the correct answers every time!

a = int(input("Enter the coefficients of a: "))
b = int(input("Enter the coefficients of b: "))
c = int(input("Enter the coefficients of c: "))

d = b**2-4*a*c # discriminant

if d < 0:
    print ("This equation has no real solution")
elif d == 0:
    x = (-b+math.sqrt(b**2-4*a*c))/2*a
    print ("This equation has one solutions: "), x
else:
    x1 = (-b+math.sqrt((b**2)-(4*(a*c))))/(2*a)
    x2 = (-b-math.sqrt((b**2)-(4*(a*c))))/(2*a)
    print ("This equation has two solutions: ", x1, " or", x2)

Have you tried to use Tomcat's Manager application? It allows you to undeploy / deploy war files with out shutting Tomcat down.

If you don't want to use the Manager application, you can also delete the war file from the webapps directory, Tomcat will undeploy the application after a short period of time. You can then copy a war file back into the directory, and Tomcat will deploy the war file.

If you are running Tomcat on Windows, you may need to configure your Context to not lock various files.

If you absolutely can't have any downtime, you may want to look at Tomcat 7's Parallel deployments You may deploy multiple versions of a web application with the same context path at the same time. The rules used to match requests to a context version are as follows:

• If no session information is present in the request, use the latest version.
• If session information is present in the request, check the session manager of each version for a matching session and if one is found, use that version.
• If session information is present in the request but no matching session can be found, use the latest version.

When finding user table, in case if want the table owner name also, you can use the following:

select su.name + '.' + so.name
from   sysobjects so,
       sysusers   su
where  so.type = 'U' and
       so.uid  = su.uid
order  by su.name,
          so.name

Seems the most foolproof way to start with a UTC date is to create a new Date object and use the setUTC… methods to set it to the date/time you want.

Then the various toLocale…String methods will provide localized output.

Example:

// This would come from the server._x000D_
// Also, this whole block could probably be made into an mktime function._x000D_
// All very bare here for quick grasping._x000D_
d = new Date();_x000D_
d.setUTCFullYear(2004);_x000D_
d.setUTCMonth(1);_x000D_
d.setUTCDate(29);_x000D_
d.setUTCHours(2);_x000D_
d.setUTCMinutes(45);_x000D_
d.setUTCSeconds(26);_x000D_
_x000D_
console.log(d);                        // -> Sat Feb 28 2004 23:45:26 GMT-0300 (BRT)_x000D_
console.log(d.toLocaleString());       // -> Sat Feb 28 23:45:26 2004_x000D_
console.log(d.toLocaleDateString());   // -> 02/28/2004_x000D_
console.log(d.toLocaleTimeString());   // -> 23:45:26

Some references:

• toLocaleString
• toLocaleDateString
• toLocaleTimeString
• getTimezoneOffset

If you are exporting another class in that module, make sure that it is not in between @Component and your ClassComponent. For example:

@Component({ ... })

export class ExampleClass{}

export class ComponentClass{}  --> this will give this error.

FIX:

export class ExampleClass{}

@Component ({ ... })

export class ComponentClass{}

You can also do the following:

CREATE TABLE #TEMPTABLE
(
    Column1 type1,
    Column2 type2,
    Column3 type3
)

INSERT INTO #TEMPTABLE
SELECT ...

SELECT *
FROM #TEMPTABLE ...

DROP TABLE #TEMPTABLE

    <!-- CSS -->
<style rel="stylesheet" type="text/css">
.all { display: table; }
.menu { float: left; width: 30%; }
.content { margin-left: 35%; }
</style>

<!-- HTML -->
<div class="all">
<div class="menu">Menu</div>
<div class="content">Content</div>
</div>

another... try to use float: left; or right;, change the width for other values... it shoul work... also note that the 10% that arent used by the div its betwen them... sorry for bad english :)

Here is a simple directive that will scroll to an element on click:

myApp.directive('scrollOnClick', function() {
  return {
    restrict: 'A',
    link: function(scope, $elm) {
      $elm.on('click', function() {
        $("body").animate({scrollTop: $elm.offset().top}, "slow");
      });
    }
  }
});

Demo: http://plnkr.co/edit/yz1EHB8ad3C59N6PzdCD?p=preview

For help creating directives, check out the videos at http://egghead.io, starting at #10 "first directive".

edit: To make it scroll to a specific element specified by a href, just check attrs.href.

myApp.directive('scrollOnClick', function() {
  return {
    restrict: 'A',
    link: function(scope, $elm, attrs) {
      var idToScroll = attrs.href;
      $elm.on('click', function() {
        var $target;
        if (idToScroll) {
          $target = $(idToScroll);
        } else {
          $target = $elm;
        }
        $("body").animate({scrollTop: $target.offset().top}, "slow");
      });
    }
  }
});

Then you could use it like this: <div scroll-on-click></div> to scroll to the element clicked. Or <a scroll-on-click href="#element-id"></div> to scroll to element with the id.