I also had an issue on a site I was working on last week. I implemented a like box and tested the like box. Then I went ahead to add an image to my header (the ob:image meta). Still the correct image did not show up on my facebook notification.

I tried everything, and came to the conclusion that every single implementation of a like button is cached. So let's say you clock the Like button on url A, then you specify an image in the header and you test it by clicking the Luke button again on url A. You won't see the image as the page is cached. The image will show up when you click on the Like button on page B.

To reset the cache, you have to use the lint debugger tool that's mentioned above, and validate all the Urls for those that are cached... That's the only thing that worked for me.

(https?:\/\/(?:www\.|(?!www))[a-zA-Z0-9][a-zA-Z0-9-]+[a-zA-Z0-9]\.[^\s]{2,}|www\.[a-zA-Z0-9][a-zA-Z0-9-]+[a-zA-Z0-9]\.[^\s]{2,}|https?:\/\/(?:www\.|(?!www))[a-zA-Z0-9]+\.[^\s]{2,}|www\.[a-zA-Z0-9]+\.[^\s]{2,})

Will match the following cases

• http://www.foufos.gr
• https://www.foufos.gr
• http://foufos.gr
• http://www.foufos.gr/kino
• http://werer.gr
• www.foufos.gr
• www.mp3.com
• www.t.co
• http://t.co
• http://www.t.co
• https://www.t.co
• www.aa.com
• http://aa.com
• http://www.aa.com
• https://www.aa.com

Will NOT match the following

• www.foufos
• www.foufos-.gr
• www.-foufos.gr
• foufos.gr
• http://www.foufos
• http://foufos
• www.mp3#.com

var expression = /(https?:\/\/(?:www\.|(?!www))[a-zA-Z0-9][a-zA-Z0-9-]+[a-zA-Z0-9]\.[^\s]{2,}|www\.[a-zA-Z0-9][a-zA-Z0-9-]+[a-zA-Z0-9]\.[^\s]{2,}|https?:\/\/(?:www\.|(?!www))[a-zA-Z0-9]+\.[^\s]{2,}|www\.[a-zA-Z0-9]+\.[^\s]{2,})/gi;_x000D_
var regex = new RegExp(expression);_x000D_
_x000D_
var check = [_x000D_
  'http://www.foufos.gr',_x000D_
  'https://www.foufos.gr',_x000D_
  'http://foufos.gr',_x000D_
  'http://www.foufos.gr/kino',_x000D_
  'http://werer.gr',_x000D_
  'www.foufos.gr',_x000D_
  'www.mp3.com',_x000D_
  'www.t.co',_x000D_
  'http://t.co',_x000D_
  'http://www.t.co',_x000D_
  'https://www.t.co',_x000D_
  'www.aa.com',_x000D_
  'http://aa.com',_x000D_
  'http://www.aa.com',_x000D_
  'https://www.aa.com',_x000D_
  'www.foufos',_x000D_
  'www.foufos-.gr',_x000D_
  'www.-foufos.gr',_x000D_
  'foufos.gr',_x000D_
  'http://www.foufos',_x000D_
  'http://foufos',_x000D_
  'www.mp3#.com'_x000D_
];_x000D_
_x000D_
check.forEach(function(entry) {_x000D_
  if (entry.match(regex)) {_x000D_
    $("#output").append( "<div >Success: " + entry + "</div>" );_x000D_
  } else {_x000D_
    $("#output").append( "<div>Fail: " + entry + "</div>" );_x000D_
  }_x000D_
});

<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>_x000D_
<div id="output"></div>

Check it in rubular - NEW version

Check it in rubular - old version

If you are using Databinding on layout you can get the context from holder. An exemple below.

@Override
public void onBindViewHolder(@NonNull GenericViewHolder holder, int position) {
    View currentView = holder.binding.getRoot().findViewById(R.id.cycle_count_manage_location_line_layout);// id of your root layout
    currentView.setBackgroundColor(ContextCompat.getColor(holder.binding.getRoot().getContext(), R.color.light_green));
}

http://localhost:8080/web: localhost ( hostname ) is the machine name or IP address of the host server e.g Glassfish, Tomcat. 8080 ( port ) is the address of the port on which the host server is listening for requests.

http://localhost/web: localhost ( hostname ) is the machine name or IP address of the host server e.g Glassfish, Tomcat. host server listening to default port 80.

Clean way with no jQuery:

function check(some_id) {
    var content = document.getElementById(some_id).childNodes[0].nodeValue;
    alert(content);
}

This is assuming each span has only the value as a child and no embedded HTML.

I use:

used_features =[
    "one",
    "two",
    "three"
]

df['is_duplicated'] = df.duplicated(used_features)
df['is_duplicated'].sum()

which gives count of duplicated rows, and then you can analyse them by a new column. I didn't see such solution here.

Try this:

$NameRegex = "chalmw-dm"  
$NameR = "$($NameRegex)*"
Get-ADComputer -Filter {name -like $NameR -and Enabled -eq $True}

In some languages like JAVA you define an array using curly braces as following but in python it has a different meaning:

Java:

int[] myIntArray = {1,2,3};
String[] myStringArray = {"a","b","c"};

However, in Python, curly braces are used to define dictionaries, which needs a key:value assignment as {'a':1, 'b':2}

To actually define an array (which is actually called list in python) you can do:

Python:

mylist = [1,2,3]

or other examples like:

mylist = list()
mylist.append(1)
mylist.append(2)
mylist.append(3)
print(mylist)
>>> [1,2,3]

C++17 (All references are from the final working draft of CPP17 - n4659)

Insertion

Sequence Containers

• vector: The functions insert, emplace_back, emplace, push_back cause reallocation if the new size is greater than the old capacity. Reallocation invalidates all the references, pointers, and iterators referring to the elements in the sequence. If no reallocation happens, all the iterators and references before the insertion point remain valid. [26.3.11.5/1]
  With respect to the reserve function, reallocation invalidates all the references, pointers, and iterators referring to the elements in the sequence. No reallocation shall take place during insertions that happen after a call to reserve() until the time when an insertion would make the size of the vector greater than the value of capacity(). [26.3.11.3/6]

• deque: An insertion in the middle of the deque invalidates all the iterators and references to elements of the deque. An insertion at either end of the deque invalidates all the iterators to the deque, but has no effect on the validity of references to elements of the deque. [26.3.8.4/1]

• list: Does not affect the validity of iterators and references. If an exception is thrown there are no effects. [26.3.10.4/1].
  The insert, emplace_front, emplace_back, emplace, push_front, push_back functions are covered under this rule.

• forward_list: None of the overloads of insert_after shall affect the validity of iterators and references [26.3.9.5/1]

• array: As a rule, iterators to an array are never invalidated throughout the lifetime of the array. One should take note, however, that during swap, the iterator will continue to point to the same array element, and will thus change its value.

Associative Containers

• All Associative Containers: The insert and emplace members shall not affect the validity of iterators and references to the container [26.2.6/9]

Unordered Associative Containers

• All Unordered Associative Containers: Rehashing invalidates iterators, changes ordering between elements, and changes which buckets elements appear in, but does not invalidate pointers or references to elements. [26.2.7/9]
  The insert and emplace members shall not affect the validity of references to container elements, but may invalidate all iterators to the container. [26.2.7/14]
  The insert and emplace members shall not affect the validity of iterators if (N+n) <= z * B, where N is the number of elements in the container prior to the insert operation, n is the number of elements inserted, B is the container’s bucket count, and z is the container’s maximum load factor. [26.2.7/15]

• All Unordered Associative Containers: In case of a merge operation (e.g., a.merge(a2)), iterators referring to the transferred elements and all iterators referring to a will be invalidated, but iterators to elements remaining in a2 will remain valid. (Table 91 — Unordered associative container requirements)

Container Adaptors

• stack: inherited from underlying container
• queue: inherited from underlying container
• priority_queue: inherited from underlying container

Erasure

Sequence Containers

• vector: The functions erase and pop_back invalidate iterators and references at or after the point of the erase. [26.3.11.5/3]

• deque: An erase operation that erases the last element of a deque invalidates only the past-the-end iterator and all iterators and references to the erased elements. An erase operation that erases the first element of a deque but not the last element invalidates only iterators and references to the erased elements. An erase operation that erases neither the first element nor the last element of a deque invalidates the past-the-end iterator and all iterators and references to all the elements of the deque. [ Note: pop_front and pop_back are erase operations. —end note ] [26.3.8.4/4]

• list: Invalidates only the iterators and references to the erased elements. [26.3.10.4/3]. This applies to erase, pop_front, pop_back, clear functions.
  remove and remove_if member functions: Erases all the elements in the list referred by a list iterator i for which the following conditions hold: *i == value, pred(*i) != false. Invalidates only the iterators and references to the erased elements [26.3.10.5/15].
  unique member function - Erases all but the first element from every consecutive group of equal elements referred to by the iterator i in the range [first + 1, last) for which *i == *(i-1) (for the version of unique with no arguments) or pred(*i, *(i - 1)) (for the version of unique with a predicate argument) holds. Invalidates only the iterators and references to the erased elements. [26.3.10.5/19]

• forward_list: erase_after shall invalidate only iterators and references to the erased elements. [26.3.9.5/1].
  remove and remove_if member functions - Erases all the elements in the list referred by a list iterator i for which the following conditions hold: *i == value (for remove()), pred(*i) is true (for remove_if()). Invalidates only the iterators and references to the erased elements. [26.3.9.6/12].
  unique member function - Erases all but the first element from every consecutive group of equal elements referred to by the iterator i in the range [first + 1, last) for which *i == *(i-1) (for the version with no arguments) or pred(*i, *(i - 1)) (for the version with a predicate argument) holds. Invalidates only the iterators and references to the erased elements. [26.3.9.6/16]

• All Sequence Containers: clear invalidates all references, pointers, and iterators referring to the elements of a and may invalidate the past-the-end iterator (Table 87 — Sequence container requirements). But for forward_list, clear does not invalidate past-the-end iterators. [26.3.9.5/32]

• All Sequence Containers: assign invalidates all references, pointers and iterators referring to the elements of the container. For vector and deque, also invalidates the past-the-end iterator. (Table 87 — Sequence container requirements)

Associative Containers

• All Associative Containers: The erase members shall invalidate only iterators and references to the erased elements [26.2.6/9]

• All Associative Containers: The extract members invalidate only iterators to the removed element; pointers and references to the removed element remain valid [26.2.6/10]

Container Adaptors

• stack: inherited from underlying container
• queue: inherited from underlying container
• priority_queue: inherited from underlying container

General container requirements relating to iterator invalidation:

• Unless otherwise specified (either explicitly or by defining a function in terms of other functions), invoking a container member function or passing a container as an argument to a library function shall not invalidate iterators to, or change the values of, objects within that container. [26.2.1/12]

• no swap() function invalidates any references, pointers, or iterators referring to the elements of the containers being swapped. [ Note: The end() iterator does not refer to any element, so it may be invalidated. —end note ] [26.2.1/(11.6)]

As examples of the above requirements:

• transform algorithm: The op and binary_op functions shall not invalidate iterators or subranges, or modify elements in the ranges [28.6.4/1]

• accumulate algorithm: In the range [first, last], binary_op shall neither modify elements nor invalidate iterators or subranges [29.8.2/1]

• reduce algorithm: binary_op shall neither invalidate iterators or subranges, nor modify elements in the range [first, last]. [29.8.3/5]

and so on...

In PHP, you can do the following to remove all non characters including the character in question.

$response = preg_replace('/[\x00-\x1F\x80-\xFF]/', '', $response);

<?php //-- Very simple variant
$useragent = $_SERVER['HTTP_USER_AGENT']; 
$iPod = stripos($useragent, "iPod"); 
$iPad = stripos($useragent, "iPad"); 
$iPhone = stripos($useragent, "iPhone");
$Android = stripos($useragent, "Android"); 
$iOS = stripos($useragent, "iOS");
//-- You can add billion devices 

$DEVICE = ($iPod||$iPad||$iPhone||$Android||$iOS||$webOS||$Blackberry||$IEMobile||$OperaMini);

if ($DEVICE !=true) {?>

<!-- What you want for all non-mobile devices. Anything with all HTML codes-->

<?php }else{ ?> 

<!-- What you want for all mobile devices. Anything with all HTML codes --> 
<?php } ?>

Extend LinearLayout/RelativeLayout and use it straight on the XML

package com.pkg_name ;
...imports...
public class LinearLayoutOutlined extends LinearLayout {
    Paint paint;    

    public LinearLayoutOutlined(Context context) {
        super(context);
        // TODO Auto-generated constructor stub
        setWillNotDraw(false) ;
        paint = new Paint();
    }
    public LinearLayoutOutlined(Context context, AttributeSet attrs) {
        super(context, attrs);
        // TODO Auto-generated constructor stub
        setWillNotDraw(false) ;
        paint = new Paint();
    }
    @Override
    protected void onDraw(Canvas canvas) {
        /*
        Paint fillPaint = paint;
        fillPaint.setARGB(255, 0, 255, 0);
        fillPaint.setStyle(Paint.Style.FILL);
        canvas.drawPaint(fillPaint) ;
        */

        Paint strokePaint = paint;
        strokePaint.setARGB(255, 255, 0, 0);
        strokePaint.setStyle(Paint.Style.STROKE);
        strokePaint.setStrokeWidth(2);  
        Rect r = canvas.getClipBounds() ;
        Rect outline = new Rect( 1,1,r.right-1, r.bottom-1) ;
        canvas.drawRect(outline, strokePaint) ;
    }

}

<?xml version="1.0" encoding="utf-8"?>

<com.pkg_name.LinearLayoutOutlined
   xmlns:android="http://schemas.android.com/apk/res/android"
   android:orientation="vertical"
    android:layout_width=...
    android:layout_height=...
   >
   ... your widgets here ...

</com.pkg_name.LinearLayoutOutlined>

• Bootstrap3 provides modals
• jQuery UI dialogs
• jQuery.msgBox provides various kinds of dialogs:
• For 5$ per app it is used, there is http://codecanyon.net/item/jquery-msgbox/92626.

There should be some trivial gain in having the execution plan stored, but it will be negligible.

If you have SSH access, you don't need to SSH first and then copy, just use Secure Copy (SCP) from the destination.

scp user@host:/path/file /localpath/file

Wild card characters are supported, so

scp user@host:/path/folder/* /localpath/folder

will copy all of the remote files in that folder.If copying more then one directory.

note -r will copy all sub-folders and content too.

You also need to make sure what is in the .bashrc file of the user.

I've also got this ridiculous error because I put cd and ls commands in there, as it was mean to let them see the current files & directories when the user is has logged in from ssh.

Here is my code to create procedure in MySQL :

DELIMITER $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `procedureName`(IN comId int)
BEGIN
select * from tableName 
         (add joins OR sub query as per your requirement)
         Where (where condition here)
END $$
DELIMITER ;

To call this procedure use this query :

call procedureName(); // without parameter
call procedureName(id,pid); // with parameter

Detail :

1) DEFINER : root is the user name and change it as per your username of mysql localhost is the host you can change it with ip address of the server if you are execute this query on hosting server.

Read here for more detail

Add the following to your conf file

fastcgi_buffers 16 16k; 
fastcgi_buffer_size 32k;

According to the documentation, there needs to be a top level layout set.

A top level layout is necessary to ensure that your widgets will resize correctly when its window is resized. To check if you have set a top level layout, preview your widget and attempt to resize the window by dragging the size grip.

You can set one by clearing the selection and right clicking on the form itself and choosing one of the layouts available in the context menu.

To make your item consistent with the system look and feel try referencing the system attribute android:attr/selectableItemBackground in your desired view's background or foreground tag:

<ImageView
    ...
    android:background="?android:attr/selectableItemBackground"      
    android:foreground="?android:attr/selectableItemBackground"
    ...
/>

Use both attributes to get desired effect before/after API level 23 respectively.

https://stackoverflow.com/a/11513474/4683601

Your main problem is thinking that the variable you declared outside of the template is the same variable being "set" inside the choose statement. This is not how XSLT works, the variable cannot be reassigned. This is something more like what you want:

<xsl:template match="class">
  <xsl:copy><xsl:apply-templates select="@*|node()"/></xsl:copy>
  <xsl:variable name="subexists">
    <xsl:choose>
      <xsl:when test="joined-subclass">true</xsl:when>
      <xsl:otherwise>false</xsl:otherwise>
    </xsl:choose>
  </xsl:variable>
  subexists:      <xsl:value-of select="$subexists" />
</xsl:template>

And if you need the variable to have "global" scope then declare it outside of the template:

<xsl:variable name="subexists">
  <xsl:choose>
     <xsl:when test="/path/to/node/joined-subclass">true</xsl:when>
     <xsl:otherwise>false</xsl:otherwise>
  </xsl:choose>
</xsl:variable>

<xsl:template match="class">
   subexists:      <xsl:value-of select="$subexists" />
</xsl:template>

It's not so much about the language as the tools and libraries. The available libraries and compilers for C are much older than for newer languages. You might think this would make them slower, but au contraire.

These libraries were written at a time when processing power and memory were at a premium. They had to be written very efficiently in order to work at all. Developers of C compilers have also had a long time to work in all sorts of clever optimizations for different processors. C's maturity and wide adoption makes for a signficant advantage over other languages of the same age. It also gives C a speed advantage over newer tools that don't emphasize raw performance as much as C had to.

adapter.remove(arraylist.get(position));
adapter.notifyDataSetChanged();

or you can call again

setListAdapter(adapter)

This works for me on Mac OS Mojave:

<Directory "/Users/{USERNAME}/Sites/project">
    Options +Indexes +FollowSymLinks +MultiViews
    AllowOverride All
    require all granted
</Directory>

You can chain your wheres directly, without function(q). There's also a nice date handling package in laravel, called Carbon. So you could do something like:

$projects = Project::where('recur_at', '>', Carbon::now())
    ->where('recur_at', '<', Carbon::now()->addWeek())
    ->where('status', '<', 5)
    ->where('recur_cancelled', '=', 0)
    ->get();

Just make sure you require Carbon in composer and you're using Carbon namespace (use Carbon\Carbon;) and it should work.

EDIT: As Joel said, you could do:

$projects = Project::whereBetween('recur_at', array(Carbon::now(), Carbon::now()->addWeek()))
    ->where('status', '<', 5)
    ->where('recur_cancelled', '=', 0)
    ->get();

You should set JAVA_HOME in the hadoop-env.sh file also which is in the Hadoop configuration directory. By default the JAVA_HOME setting line is commented.

<button type ="button" onclick="location.href='@Url.Action("viewname","Controllername")'"> Button name</button>

for e.g ,

<button type="button" onclick="location.href='@Url.Action("register","Home")'">Register</button>

Using new api fetch:

const dataToSend = JSON.stringify({"email": "[email protected]", "password": "101010"});
let dataReceived = ""; 
fetch("", {
    credentials: "same-origin",
    mode: "same-origin",
    method: "post",
    headers: { "Content-Type": "application/json" },
    body: dataToSend
})
    .then(resp => {
        if (resp.status === 200) {
            return resp.json()
        } else {
            console.log("Status: " + resp.status)
            return Promise.reject("server")
        }
    })
    .then(dataJson => {
        dataReceived = JSON.parse(dataJson)
    })
    .catch(err => {
        if (err === "server") return
        console.log(err)
    })

console.log(`Received: ${dataReceived}`)                

I think atompub REST API is a great example of a restful service. See the snippet below from the atompub spec:

POST /edit/ HTTP/1.1
Host: example.org
User-Agent: Thingio/1.0
Authorization: Basic ZGFmZnk6c2VjZXJldA==
Content-Type: application/atom+xml;type=entry
Content-Length: nnn
Slug: First Post

<?xml version="1.0"?>
<entry xmlns="http://www.w3.org/2005/Atom">
  <title>Atom-Powered Robots Run Amok</title>
  <id>urn:uuid:1225c695-cfb8-4ebb-aaaa-80da344efa6a</id>
  <updated>2003-12-13T18:30:02Z</updated>
  <author><name>John Doe</name></author>
  <content>Some text.</content>
</entry>

The server signals a successful creation with a status code of 201. The response includes a Location header indicating the Member Entry URI of the Atom Entry, and a representation of that Entry in the body of the response.

HTTP/1.1 201 Created
Date: Fri, 7 Oct 2005 17:17:11 GMT
Content-Length: nnn
Content-Type: application/atom+xml;type=entry;charset="utf-8"
Location: http://example.org/edit/first-post.atom
ETag: "c180de84f991g8"  

<?xml version="1.0"?>
<entry xmlns="http://www.w3.org/2005/Atom">
  <title>Atom-Powered Robots Run Amok</title>
  <id>urn:uuid:1225c695-cfb8-4ebb-aaaa-80da344efa6a</id>
  <updated>2003-12-13T18:30:02Z</updated>
  <author><name>John Doe</name></author>
  <content>Some text.</content>
  <link rel="edit"
      href="http://example.org/edit/first-post.atom"/>
</entry>

The Entry created and returned by the Collection might not match the Entry POSTed by the client. A server MAY change the values of various elements in the Entry, such as the atom:id, atom:updated, and atom:author values, and MAY choose to remove or add other elements and attributes, or change element content and attribute values.

In newer versions of angular (I'm using 1.3) you can basically set the model and the value and the double binding do all the work this example works like a charm:

angular.module('radioExample', []).controller('ExampleController', ['$scope', function($scope) {_x000D_
  $scope.color = {_x000D_
    name: 'blue'_x000D_
  };_x000D_
}]);

<script src="https://ajax.googleapis.com/ajax/libs/angularjs/1.3.15/angular.min.js"></script>_x000D_
<html>_x000D_
<body ng-app="radioExample">_x000D_
<form name="myForm" ng-controller="ExampleController">_x000D_
  <input type="radio" ng-model="color.name" value="red">  Red <br/>_x000D_
  <input type="radio" ng-model="color.name" value="green"> Green <br/>_x000D_
  <input type="radio" ng-model="color.name" value="blue"> Blue <br/>_x000D_
  <tt>color = {{color.name}}</tt><br/>_x000D_
 </form>_x000D_
  </body>_x000D_
</html>

for MS excel 2000 office version, click on the pivot table you will find a tab above the ribon, called Pivottable tool - click on that You can change data source from Data tab

Different types to check the values exists

d = {"key1":"value1", "key2":"value2"}
"value10" in d.values() 
>> False

What if list of values

test = {'key1': ['value4', 'value5', 'value6'], 'key2': ['value9'], 'key3': ['value6']}
"value4" in [x for v in test.values() for x in v]
>>True

What if list of values with string values

test = {'key1': ['value4', 'value5', 'value6'], 'key2': ['value9'], 'key3': ['value6'], 'key5':'value10'}
values = test.values()
"value10" in [x for v in test.values() for x in v] or 'value10' in values
>>True

Use upper-case HH for 24h format:

String s = curr.ToString("HH:mm");

See DateTime.ToString Method.

You can use this to fill zeroes in a Mat object already containing data:

image1 = Scalar::all(0);

For eg, if you use it this way:

Mat image,image1;
image = imread("IMG_20160107_185956.jpg", CV_LOAD_IMAGE_COLOR);   // Read the file

if(! image.data )                              // Check for invalid input
{
    cout <<  "Could not open or find the image" << std::endl ;
    return -1;
}
cvtColor(image,image1,CV_BGR2GRAY);
image1 = Scalar::all(0);

It will work fine. But you cannot use this for uninitialised Mat. For that you can go for other options mentioned in above answers, like

Mat drawing = Mat::zeros( image.size(), CV_8UC3 );

Hyperlink is not a control, it is a flow content element, you can only use it in controls which support flow content, like a TextBlock. TextBoxes only have plain text.

It is almost fine. Just have:

Player[] thePlayers = new Player[playerCount + 1];

And let the loop be:

for(int i = 0; i < thePlayers.length; i++)

And note that java convention dictates that names of methods and variables should start with lower-case.

Update: put your method within the class body.

This could be done by using a hidden variable in the view and then using that variable to post from the JavaScript code.

Here is my code in the view

@Html.Hidden("RedirectTo", Url.Action("ActionName", "ControllerName"));

Now you can use this in the JavaScript file as:

 var url = $("#RedirectTo").val();
 location.href = url;

It worked like a charm fro me. I hope it helps you too.

you should add plug in to your local setting of firefox in your user home

 vladimir@shinsengumi ~/.mozilla/plugins $ pwd
 /home/vladimir/.mozilla/plugins 
 vladimir@shinsengumi ~/.mozilla/plugins $ ls -ltr
 lrwxrwxrwx 1 vladimir vladimir 60 Jan  1 23:06 libnpjp2.so -> /home/vladimir/Install/jdk1.6.0_32/jre/lib/amd64/libnpjp2.so

Things are going better, right now you can use SVG files.

        marker = new google.maps.Marker({
            position: {lat: 36.720426, lng: -4.412573},
            map: map,
            draggable: true,
            icon: "img/tree.svg"
        });

You can use following code to read file in String from resource folder.

final Resource resource = new ClassPathResource("public.key");
String publicKey = null;
try {
     publicKey = new String(Files.readAllBytes(resource.getFile().toPath()), StandardCharsets.UTF_8);
} catch (IOException e) {
     e.printStackTrace();
}

Setup for Linux/Ubuntu/Mint

1. download Android Studio or SDK only
2. install
3. set PATH

3.1) Open terminal and edit ~/.bashrc

sudo su
vim ~/.bashrc

3.2) Export ANDROID_HOME and add folders with binaries to your PATH

Common default install folders:

• /root/Android/Sdk
• ~/Android/Sdk

Example .bashrc

export ANDROID_HOME=/root/Android/Sdk
PATH=$PATH:$ANDROID_HOME/tools
PATH=$PATH:$ANDROID_HOME/platform-tools

3.3) Refresh your PATH

source ~/.bashrc

4) Install correct SDK

When ionic build android still fails it could be because of wrong sdk version. To install correct versions and images run android from command line. Since it is now in your PATH you should be able to run it from anywhere.

app.js

$("button").click( function() {
 $.getJSON( "article.json", function(obj) {
  $.each(obj, function(key, value) {
         $("ul").append("<li>"+value.name+"'s age is : "+value.age+"</li>");
  });
 });
});

index.html

<!DOCTYPE html>
<html>
  <head>
    <meta charset="utf-8">
    <title>Tax Calulator</title>
    <script src="jquery-3.2.0.min.js" type="text/javascript"></script>
  </head>
  <body>
    <ul></ul>
    <button>Users</button>
<script type="text/javascript" src="app.js"></script>
  </body>
</html>

article.json

{
"a": {
"name": "Abra",
"age": 125,
"company": "Dabra"
},
"b": {
"name": "Tudak tudak",
"age": 228,
"company": "Dhidak dhidak"
}
}

server.js

var http = require('http');
var fs = require('fs');

function onRequest(request,response){
  if(request.method == 'GET' && request.url == '/') {
          response.writeHead(200,{"Content-Type":"text/html"});
          fs.createReadStream("./index.html").pipe(response);
  } else if(request.method == 'GET' && request.url == '/jquery-3.2.0.min.js') {
          response.writeHead(200,{"Content-Type":"text/javascript"});
          fs.createReadStream("./jquery-3.2.0.min.js").pipe(response);
  } else if(request.method == 'GET' && request.url == '/app.js') {
          response.writeHead(200,{"Content-Type":"text/javascript"});
          fs.createReadStream("./app.js").pipe(response);
  }
  else if(request.method == 'GET' && request.url == '/article.json') {
          response.writeHead(200,{"Content-Type":"text/json"});
          fs.createReadStream("./article.json").pipe(response);
  }
}

http.createServer(onRequest).listen(2341);
console.log("Server is running ....");

Server.js will run a simple node http server in your local to process the data.

Note don't forget toa dd jQuery library in your folder structure and change the version number accordingly in server.js and index.html

This is my running one https://github.com/surya4/jquery-json.

enter image description here

According to "Introduction to Algorithms" by Thomas H. Cormen, Charles E. Leiserson, Ronald L. Rivest, and Clifford Stein, following is the definition of tree height:

The height of a node in a tree is the number of edges on the longest simple downward path from the node to a leaf, and the height of a tree is the height of its root. The height of a tree is also equal to the largest depth of any node in the tree.

Following is my ruby solution. Most of the people forgot about height of empty tree or tree of single node in their implementation.

def height(node, current_height)
  return current_height if node.nil? || (node.left.nil? && node.right.nil?)
  return [height(node.left, current_height + 1), height(node.right, current_height + 1)].max if node.left && node.right
  return height(node.left, current_height + 1) if node.left
  return height(node.right, current_height + 1)
end

i leaned that from a video on udemy and edited to be stronger random password

}

private String pass() {
        String passswet="1234567890zxcvbbnmasdfghjklop[iuytrtewq@#$%^&*" ;

        char icon1;
        char[] t=new char[20];

         int rand1=(int)(Math.random()*6)+38;//to make a random within the range of special characters

            icon1=passswet.charAt(rand1);//will produce char with a special character

        int i=0;
        while( i <11) {

             int rand=(int)(Math.random()*passswet.length());
             //notice (int) as the original value of Math>random() is double

             t[i] =passswet.charAt(rand);

             i++;
                t[10]=icon1;
//to replace the specified item with icon1
         }
        return new String(t);
}






}

These answers were outdated for me, so here's how it worked out.

Add OkHttp, in my case the version is 3.3.1:

compile 'com.squareup.okhttp3:okhttp:3.3.1'

Then before building your Retrofit, do this:

OkHttpClient okHttpClient = new OkHttpClient().newBuilder()
    .connectTimeout(60, TimeUnit.SECONDS)
    .readTimeout(60, TimeUnit.SECONDS)
    .writeTimeout(60, TimeUnit.SECONDS)
    .build();
return new Retrofit.Builder()
    .baseUrl(baseUrl)
    .client(okHttpClient)
    .addConverterFactory(GsonConverterFactory.create())
    .build();

Change to:

SELECT 
  CASE 
    WHEN FRUIT = 'A' THEN 'APPLE' 
    WHEN FRUIT = 'B' THEN 'BANANA'     
  END
FROM FRUIT_TABLE;

That might be because you would be using functional component and in that you would be using these '{}' braces instead of '()' Example : const Main = () => ( ... then your code ... ). Basically, you will have to wrap up your code within these brackets '()'.

I would strongly suggest using NDesk.Options (Documentation) and/or Mono.Options (same API, different namespace). An example from the documentation:

bool show_help = false;
List<string> names = new List<string> ();
int repeat = 1;

var p = new OptionSet () {
    { "n|name=", "the {NAME} of someone to greet.",
       v => names.Add (v) },
    { "r|repeat=", 
       "the number of {TIMES} to repeat the greeting.\n" + 
          "this must be an integer.",
        (int v) => repeat = v },
    { "v", "increase debug message verbosity",
       v => { if (v != null) ++verbosity; } },
    { "h|help",  "show this message and exit", 
       v => show_help = v != null },
};

List<string> extra;
try {
    extra = p.Parse (args);
}
catch (OptionException e) {
    Console.Write ("greet: ");
    Console.WriteLine (e.Message);
    Console.WriteLine ("Try `greet --help' for more information.");
    return;
}

Go to "Pricing & Distribution" and choose "Unpublish" option for "App Availability", please refer below youtube video

https://www.youtube.com/watch?v=XaH3X8ZD-l8

For me above solutions didn't work then I tried

map.setCenter(new google.maps.LatLng(lat, lng));

and it worked as expected.

According to the angularjs event docs the receiving end should be containing arguments with a structure like

@params

-- {Object} event being the event object containing info on the event

-- {Object} args that are passed by the callee (Note that this can only be one so better to send in a dictionary object always)

$scope.$on('fooEvent', function (event, args) { console.log(args) }); From your code

Also if you are trying to get a shared piece of information to be available accross different controllers there is an another way to achieve that and that is angular services.Since the services are singletons information can be stored and fetched across controllers.Simply create getter and setter functions in that service, expose these functions, make global variables in the service and use them to store the info

Thanks for the pointers.

I don't know, whether this is the best approach to the problem or not, but here is how I got it to work. I referenced the Microsoft XML, v2.6 dll in my VBA, and then the following code snippet, gives me the required values

Dim objXML As MSXML2.DOMDocument

Set objXML = New MSXML2.DOMDocument

If Not objXML.loadXML(strXML) Then  'strXML is the string with XML'
    Err.Raise objXML.parseError.ErrorCode, , objXML.parseError.reason
End If
 
Dim point As IXMLDOMNode
Set point = objXML.firstChild

Debug.Print point.selectSingleNode("X").Text
Debug.Print point.selectSingleNode("Y").Text

You have to put /show a after the URL you're working on:

For example:

"http://jsfiddle.net/rkw79/PagTJ/show/"

for Field URL :

"http://jsfiddle.net/rkw79/PagTJ/"

after that save the file and go to the show folder(or the file name you have saved with) under that folder u will get a html file show_resource.HTML .that is your actual file.now open it in browser and view the source code. Best of luck--------Ujjwal Gupta

From Linux Change Default User Home Directory While Adding A New User:

Simply open this file using a text editor, type:

vi /etc/default/useradd

The default home directory defined by HOME variable, find line that read as follows:

HOME=/home

Replace with:

HOME=/iscsi/user

Save and close the file. Now you can add user using regular useradd command:

# useradd vivek
# passwd vivek

Verify user information:

# finger vivek

Before:

compile 'com.google.android.gms:play-services-location:10.0.1'
compile 'com.google.android.gms:play-services-auth:10.0.1'
compile 'com.google.firebase:firebase-database:10.2.0'
compile 'com.google.firebase:firebase-core:10.2.0'
compile 'com.google.firebase:firebase-messaging:10.2.0'

After:

compile 'com.google.android.gms:play-services-location:10.2.0'
compile 'com.google.android.gms:play-services-auth:10.2.0'
compile 'com.google.firebase:firebase-database:10.2.0'
compile 'com.google.firebase:firebase-core:10.2.0'
compile 'com.google.firebase:firebase-messaging:10.2.0'

Finally got resolved.

Use this method, you just have to pass the InputStream

public String readIt(InputStream is) {
    if (is != null) {
        BufferedReader reader = new BufferedReader(new InputStreamReader(is, "utf-8"), 8);

        StringBuilder sb = new StringBuilder();
        String line;
        while ((line = reader.readLine()) != null) {
            sb.append(line).append("\n");
        }
        is.close();
        return sb.toString();
    }
    return "error: ";
}

nick's example saves it to your localhost.
But you can also save it to your local drive.
if you use doublebackslashes:

 $filename= "Invoice.pdf"; 
 $filelocation = "C:\\invoices";  

 $fileNL = $filelocation."\\".$filename;
 $pdf->Output($fileNL,'F');

 $pdf->Output($filename,'D'); // you cannot add file location here

P.S. In Firefox (optional) Tools> Options > General tab> Download >Always ask me where to save files

Yes, you must have to open php.ini and remove the semicolon to:

;extension=php_openssl.dll

remove the ";" like this and it will work.

extension=php_openssl.dll

Happy Coding.

If you prefer a code with a pretty look, you can do a break:

for(int j = 0; ; j++){
    if(j < 6
    && j < ( (int) abc[j] & 0xff)){
        break;
    }

    // Put your code here
}

Tensorflow 2.0 Compatible Answer: In Tensorflow Version >= 2.0, the command for Initializing all the Variables if we use Graph Mode, to fix the FailedPreconditionError is shown below:

tf.compat.v1.global_variables_initializer

This is just a shortcut for variables_initializer(global_variables())

It returns an Op that initializes global variables in the graph.

The most portable way to get the hostname of the current computer in Java is as follows:

import java.net.InetAddress;
import java.net.UnknownHostException;

public class getHostName {

    public static void main(String[] args) throws UnknownHostException {
        InetAddress iAddress = InetAddress.getLocalHost();
        String hostName = iAddress.getHostName();
        //To get  the Canonical host name
        String canonicalHostName = iAddress.getCanonicalHostName();

        System.out.println("HostName:" + hostName);
        System.out.println("Canonical Host Name:" + canonicalHostName);
    }
}

ok in addition to @user3096626 answer i think it will be more helpful if someone provided code example, the following example will show you how to fix image orientation comes from url (remote images):

Solution 1: using javascript (recommended)

1. because load-image library doesn't extract exif tags from url images only (file/blob), we will use both exif-js and load-image javascript libraries, so first add these libraries to your page as the follow:

   <script src="https://cdnjs.cloudflare.com/ajax/libs/exif-js/2.1.0/exif.min.js"></script>
   <script src="https://cdnjs.cloudflare.com/ajax/libs/blueimp-load-image/2.12.2/load-image.min.js"></script>
   <script src="https://cdnjs.cloudflare.com/ajax/libs/blueimp-load-image/2.12.2/load-image-scale.min.js"></script>
   <script src="https://cdnjs.cloudflare.com/ajax/libs/blueimp-load-image/2.12.2/load-image-orientation.min.js"></script>
   

   Note the version 2.2 of exif-js seems has issues so we used 2.1

2. then basically what we will do is

   a - load the image using window.loadImage()

   b - read exif tags using window.EXIF.getData()

   c - convert the image to canvas and fix the image orientation using window.loadImage.scale()

   d - place the canvas into the document

here you go :)

window.loadImage("/your-image.jpg", function (img) {
  if (img.type === "error") {
    console.log("couldn't load image:", img);
  } else {
    window.EXIF.getData(img, function () {
        var orientation = EXIF.getTag(this, "Orientation");
        var canvas = window.loadImage.scale(img, {orientation: orientation || 0, canvas: true});
        document.getElementById("container").appendChild(canvas); 
        // or using jquery $("#container").append(canvas);

    });
  }
});

of course also you can get the image as base64 from the canvas object and place it in the img src attribute, so using jQuery you can do ;)

$("#my-image").attr("src",canvas.toDataURL());

here is the full code on: github: https://github.com/digital-flowers/loadimage-exif-example

Solution 2: using html (browser hack)

there is a very quick and easy hack, most browsers display the image in the right orientation if the image is opened inside a new tab directly without any html (LOL i don't know why), so basically you can display your image using iframe by putting the iframe src attribute as the image url directly:

<iframe src="/my-image.jpg"></iframe>

Solution 3: using css (only firefox & safari on ios)

there is css3 attribute to fix image orientation but the problem it is only working on firefox and safari/ios it is still worth mention because soon it will be available for all browsers (Browser support info from caniuse)

img {
   image-orientation: from-image;
}

In my case, flutter devices showed my device correctly and flutter run worked as expected. but the device is not shown in Android Studio.

Here is my sulotion:

in my .bash_profile ,the Android SDK configed like this:

export ANDROID_SDK_ROOT="~/Library/Android/sdk"

seems flutter plugin can not recgize the ~, so I changed it to this way:

export ANDROID_SDK_ROOT="/Users/charliema/Library/Android/sdk"

reopen the Android Studio, it worked.

You need to dig a bit deeper into the api to do this:

from matplotlib import pyplot as plt
plt.plot(range(5))
plt.xlim(-3, 3)
plt.ylim(-3, 3)
plt.gca().set_aspect('equal', adjustable='box')
plt.draw()

doc for set_aspect

check properties->java build path -> libraries. there should be no errors, in my case there was errors in the maven. once I put the required jar in the maven repo, it worked fine

Try / \([\s\S]*?\)/g

Where

(space) matches the character (space) literally

\( matches the character ( literally

[\s\S] matches any character (\s matches any whitespace character and \S matches any non-whitespace character)

*? matches between zero and unlimited times

\) matches the character ) literally

g matches globally

Code Example:

var str = "Hello, this is Mike (example)";
str = str.replace(/ \([\s\S]*?\)/g, '');
console.log(str);

.as-console-wrapper {top: 0}

If you're using Python 3.6 on Amazon Linux (based on RHEL, but the RHEL answers given here didn't work):

sudo yum install python36-devel

during command line works. I'm using Ant to commit an artifact after build completes. Experienced the same issue... Manually excepting the cert did not work (Jenkins is funny that way). Add these options to your svn command:

--non-interactive

--trust-server-cert

<!DOCTYPE html><html lang='en' class=''>
<head><script src='//production-assets.codepen.io/assets/editor/live/console_runner-079c09a0e3b9ff743e39ee2d5637b9216b3545af0de366d4b9aad9dc87e26bfd.js'></script><script src='//production-assets.codepen.io/assets/editor/live/events_runner-73716630c22bbc8cff4bd0f07b135f00a0bdc5d14629260c3ec49e5606f98fdd.js'></script><script src='//production-assets.codepen.io/assets/editor/live/css_live_reload_init-2c0dc5167d60a5af3ee189d570b1835129687ea2a61bee3513dee3a50c115a77.js'></script><meta charset='UTF-8'><meta name="robots" content="noindex"><link rel="shortcut icon" type="image/x-icon" href="//production-assets.codepen.io/assets/favicon/favicon-8ea04875e70c4b0bb41da869e81236e54394d63638a1ef12fa558a4a835f1164.ico" /><link rel="mask-icon" type="" href="//production-assets.codepen.io/assets/favicon/logo-pin-f2d2b6d2c61838f7e76325261b7195c27224080bc099486ddd6dccb469b8e8e6.svg" color="#111" /><link rel="canonical" href="https://codepen.io/nelsonleite/pen/RaGwba?depth=everything&order=popularity&page=4&q=product&show_forks=false" />
<link href='https://fonts.googleapis.com/css?family=Raleway' rel='stylesheet' type='text/css'>
<link rel='stylesheet prefetch' href='https://maxcdn.bootstrapcdn.com/bootstrap/3.3.5/css/bootstrap.min.css'>
<style class="cp-pen-styles">.product-description {
  transform: translate3d(0, 0, 0);
  transform-style: preserve-3d;
  perspective: 1000;
  backface-visibility: hidden;
}

body {
  color: #212121;
}

.container {
  padding-top: 25px;
  padding-bottom: 25px;
}

img {
  max-width: 100%;
}

hr {
  border-color: #e5e5e5;
  margin: 15px 0;
}

.secondary-text {
  color: #b6b6b6;
}

.list-inline {
  margin: 0;
}
.list-inline li {
  padding: 0;
}

.card-wrapper {
  position: relative;
  width: 100%;
  height: 390px;
  border: 1px solid #e5e5e5;
  border-bottom-width: 2px;
  overflow: hidden;
  margin-bottom: 30px;
}
.card-wrapper:after {
  content: "";
  position: absolute;
  top: 0;
  left: 0;
  width: 100%;
  height: 100%;
  opacity: 0;
  box-shadow: 0 5px 15px rgba(0, 0, 0, 0.3);
  transition: opacity 0.6s cubic-bezier(0.165, 0.84, 0.44, 1);
}
.card-wrapper:hover:after {
  opacity: 1;
}
.card-wrapper:hover .image-holder:before {
  opacity: .75;
}
.card-wrapper:hover .image-holder:after {
  opacity: 1;
  transform: translate(-50%, -50%);
}
.card-wrapper:hover .image-holder--original {
  transform: translateY(-15px);
}
.card-wrapper:hover .product-description {
  height: 205px;
}
@media (min-width: 768px) {
  .card-wrapper:hover .product-description {
    height: 185px;
  }
}

.image-holder {
  display: block;
  position: relative;
  width: 100%;
  height: 310px;
  background-color: #ffffff;
  z-index: 1;
}
@media (min-width: 768px) {
  .image-holder {
    height: 325px;
  }
}
.image-holder:before {
  content: '';
  position: absolute;
  top: 0;
  left: 0;
  width: 100%;
  height: 100%;
  background-color: #4CAF50;
  opacity: 0;
  z-index: 5;
  transition: opacity 0.6s;
}
.image-holder:after {
  content: '+';
  font-family: 'Raleway', sans-serif;
  font-size: 70px;
  color: #4CAF50;
  text-align: center;
  position: absolute;
  top: 92.5px;
  left: 50%;
  width: 75px;
  height: 75px;
  line-height: 75px;
  background-color: #ffffff;
  opacity: 0;
  border-radius: 50%;
  z-index: 10;
  transform: translate(-50%, 100%);
  box-shadow: 0 5px 15px rgba(0, 0, 0, 0.3);
  transition: all 0.4s ease-out;
}
@media (min-width: 768px) {
  .image-holder:after {
    top: 107.5px;
  }
}
.image-holder .image-holder__link {
  display: block;
  position: absolute;
  top: 0;
  left: 0;
  width: 100%;
  height: 100%;
  z-index: 15;
}
.image-holder .image-holder--original {
  transition: transform 0.8s cubic-bezier(0.165, 0.84, 0.44, 1);
}

.image-liquid {
  width: 100%;
  height: 325px;
  background-size: cover;
  background-position: center center;
}

.product-description {
  position: absolute;
  left: 0;
  bottom: 0;
  width: 100%;
  height: 80px;
  padding: 10px 15px;
  overflow: hidden;
  background-color: #fafafa;
  border-top: 1px solid #e5e5e5;
  transition: height 0.6s cubic-bezier(0.165, 0.84, 0.44, 1);
  z-index: 2;
}
@media (min-width: 768px) {
  .product-description {
    height: 65px;
  }
}
.product-description p {
  margin: 0 0 5px;
}
.product-description .product-description__title {
  font-family: 'Raleway', sans-serif;
  position: relative;
  white-space: nowrap;
  overflow: hidden;
  margin: 0;
  font-size: 18px;
  line-height: 1.25;
}
.product-description .product-description__title:after {
  content: '';
  width: 60px;
  height: 100%;
  position: absolute;
  top: 0;
  right: 0;
  background: linear-gradient(to right, rgba(255, 255, 255, 0), #fafafa);
}
.product-description .product-description__title a {
  text-decoration: none;
  color: inherit;
}
.product-description .product-description__category {
  white-space: nowrap;
  overflow: hidden;
  text-overflow: ellipsis;
}
.product-description .product-description__price {
  color: #4CAF50;
  text-align: left;
  font-weight: bold;
  letter-spacing: 0.06em;
}
@media (min-width: 768px) {
  .product-description .product-description__price {
    text-align: right;
  }
}
.product-description .sizes-wrapper {
  margin-bottom: 15px;
}
.product-description .color-list {
  font-size: 0;
}
.product-description .color-list__item {
  width: 25px;
  height: 10px;
  position: relative;
  z-index: 1;
  transition: all .2s;
}
.product-description .color-list__item:hover {
  width: 40px;
}
.product-description .color-list__item--red {
  background-color: #F44336;
}
.product-description .color-list__item--blue {
  background-color: #448AFF;
}
.product-description .color-list__item--green {
  background-color: #CDDC39;
}
.product-description .color-list__item--orange {
  background-color: #FF9800;
}
.product-description .color-list__item--purple {
  background-color: #673AB7;
}
</style></head><body>
<!--
Inspired in this dribbble
https://dribbble.com/shots/986548-Product-Catalog
-->

<div class="container">
    <div class="row">

        <div class="col-xs-12 col-sm-6 col-md-4">
            <article class="card-wrapper">
                <div class="image-holder">
                    <a href="#" class="image-holder__link"></a>
                    <div class="image-liquid image-holder--original" style="background-image: url('https://upload.wikimedia.org/wikipedia/commons/2/24/Blue_Tshirt.jpg')">
                    </div>
                </div>

                <div class="product-description">
                    <!-- title -->
                    <h1 class="product-description__title">
                        <a href="#">                        
                            Adidas Originals
                            </a>
                    </h1>

                    <!-- category and price -->
                    <div class="row">
                        <div class="col-xs-12 col-sm-8 product-description__category secondary-text">
                            Men's running shirt
                        </div>
                        <div class="col-xs-12 col-sm-4 product-description__price">
                            € 499
                        </div>
                    </div>

                    <!-- divider -->
                    <hr />

                    <!-- sizes -->
                    <div class="sizes-wrapper">
                        <b>Sizes</b>
                        <br />
                        <span class="secondary-text text-uppercase">
                            <ul class="list-inline">
                                <li>xs,</li>                                
                                <li>s,</li>                             
                                <li>sm,</li>                                
                                <li>m,</li>
                                <li>l,</li>                             
                                <li>xl,</li>                                
                                <li>xxl</li>                                
                            </ul>
                        </span>
                    </div>

                    <!-- colors -->
                    <div class="color-wrapper">
                        <b>Colors</b>
                        <br />
                        <ul class="list-inline color-list">
                            <li class="color-list__item color-list__item--red"></li>
                            <li class="color-list__item color-list__item--blue"></li>
                            <li class="color-list__item color-list__item--green"></li>
                            <li class="color-list__item color-list__item--orange"></li>
                            <li class="color-list__item color-list__item--purple"></li>
                        </ul>
                    </div>
                </div>

            </article>
        </div>

        <div class="col-xs-12 col-sm-6 col-md-4">
            <article class="card-wrapper">
                <div class="image-holder">
                    <a href="#" class="image-holder__link"></a>
                    <div class="image-liquid image-holder--original" style="background-image: url('https://upload.wikimedia.org/wikipedia/commons/thumb/7/75/Jeans_BW_2_(3213391837).jpg/543px-Jeans_BW_2_(3213391837).jpg')">
                    </div>
                </div>

                <div class="product-description">
                    <!-- title -->
                    <h1 class="product-description__title">
                        <a href="#">                        
                            Adidas Originals
                            </a>
                    </h1>

                    <!-- category and price -->
                    <div class="row">
                        <div class="col-sm-8 product-description__category secondary-text">
                            Men's running shirt
                        </div>
                        <div class="col-sm-4 product-description__price text-right">
                            € 499
                        </div>
                    </div>

                    <!-- divider -->
                    <hr />

                    <!-- sizes -->
                    <div class="sizes-wrapper">
                        <b>Sizes</b>
                        <br />
                        <span class="secondary-text text-uppercase">
                            <ul class="list-inline">
                                <li>xs,</li>                                
                                <li>s,</li>                             
                                <li>sm,</li>                                
                                <li>m,</li>
                                <li>l,</li>                             
                                <li>xl,</li>                                
                                <li>xxl</li>                                
                            </ul>
                        </span>
                    </div>

                    <!-- colors -->
                    <div class="color-wrapper">
                        <b>Colors</b>
                        <br />
                        <ul class="list-inline color-list">
                            <li class="color-list__item color-list__item--red"></li>
                            <li class="color-list__item color-list__item--blue"></li>
                            <li class="color-list__item color-list__item--green"></li>
                            <li class="color-list__item color-list__item--orange"></li>
                            <li class="color-list__item color-list__item--purple"></li>
                        </ul>
                    </div>
                </div>

            </article>
        </div>

        <div class="col-xs-12 col-sm-6 col-md-4">
            <article class="card-wrapper">
                <div class="image-holder">
                    <a href="#" class="image-holder__link"></a>
                    <div class="image-liquid image-holder--original" style="background-image: url('https://upload.wikimedia.org/wikipedia/commons/b/b8/Columbia_Sportswear_Jacket.jpg')">
                    </div>
                </div>

                <div class="product-description">
                    <!-- title -->
                    <h1 class="product-description__title">
                        <a href="#">                        
                            Adidas Originals
                            </a>
                    </h1>

                    <!-- category and price -->
                    <div class="row">
                        <div class="col-sm-8 product-description__category secondary-text">
                            Men's running shirt
                        </div>
                        <div class="col-sm-4 product-description__price text-right">
                            € 499
                        </div>
                    </div>

                    <!-- divider -->
                    <hr />

                    <!-- sizes -->
                    <div class="sizes-wrapper">
                        <b>Sizes</b>
                        <br />
                        <span class="secondary-text text-uppercase">
                            <ul class="list-inline">
                                <li>xs,</li>                                
                                <li>s,</li>                             
                                <li>sm,</li>                                
                                <li>m,</li>
                                <li>l,</li>                             
                                <li>xl,</li>                                
                                <li>xxl</li>                                
                            </ul>
                        </span>
                    </div>

                    <!-- colors -->
                    <div class="color-wrapper">
                        <b>Colors</b>
                        <br />
                        <ul class="list-inline color-list">
                            <li class="color-list__item color-list__item--red"></li>
                            <li class="color-list__item color-list__item--blue"></li>
                            <li class="color-list__item color-list__item--green"></li>
                            <li class="color-list__item color-list__item--orange"></li>
                            <li class="color-list__item color-list__item--purple"></li>
                        </ul>
                    </div>
                </div>

            </article>
        </div>

        <div class="col-xs-12 col-sm-6 col-md-4">
            <article class="card-wrapper">
                <div class="image-holder">
                    <a href="#" class="image-holder__link"></a>
                    <div class="image-liquid image-holder--original" style="background-image: url('http://www.publicdomainpictures.net/pictures/20000/nahled/red-shoes-isolated.jpg')">
                    </div>
                </div>

                <div class="product-description">
                    <!-- title -->
                    <h1 class="product-description__title">
                        <a href="#">                        
                            Adidas Originals
                            </a>
                    </h1>

                    <!-- category and price -->
                    <div class="row">
                        <div class="col-sm-8 product-description__category secondary-text">
                            Men's running shirt
                        </div>
                        <div class="col-sm-4 product-description__price text-right">
                            € 499
                        </div>
                    </div>

                    <!-- divider -->
                    <hr />

                    <!-- sizes -->
                    <div class="sizes-wrapper">
                        <b>Sizes</b>
                        <br />
                        <span class="secondary-text text-uppercase">
                            <ul class="list-inline">
                                <li>xs,</li>                                
                                <li>s,</li>                             
                                <li>sm,</li>                                
                                <li>m,</li>
                                <li>l,</li>                             
                                <li>xl,</li>                                
                                <li>xxl</li>                                
                            </ul>
                        </span>
                    </div>

                    <!-- colors -->
                    <div class="color-wrapper">
                        <b>Colors</b>
                        <br />
                        <ul class="list-inline color-list">
                            <li class="color-list__item color-list__item--red"></li>
                            <li class="color-list__item color-list__item--blue"></li>
                            <li class="color-list__item color-list__item--green"></li>
                            <li class="color-list__item color-list__item--orange"></li>
                            <li class="color-list__item color-list__item--purple"></li>
                        </ul>
                    </div>
                </div>

            </article>
        </div>

    </div>
</div>

</body></html>

The sample is made

If I understand you correctly you want to close the application even if the user did not click on the close button. You will need to register WindowEvents maybe with addWindowListener() or enableEvents() whichever suits your needs better.

You can then invoke the event with a call to processWindowEvent(). Here is a sample code that will create a JFrame, wait 5 seconds and close the JFrame without user interaction.

import javax.swing.*;
import java.awt.*;
import java.awt.event.*;

public class ClosingFrame extends JFrame implements WindowListener{

public ClosingFrame(){
    super("A Frame");
    setSize(400, 400);
            //in case the user closes the window
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            setVisible(true);
            //enables Window Events on this Component
            this.addWindowListener(this);

            //start a timer
    Thread t = new Timer();
            t.start();
    }

public void windowOpened(WindowEvent e){}
public void windowClosing(WindowEvent e){}

    //the event that we are interested in
public void windowClosed(WindowEvent e){
    System.exit(0);
}

public void windowIconified(WindowEvent e){}
public void windowDeiconified(WindowEvent e){}
public void windowActivated(WindowEvent e){}
public void windowDeactivated(WindowEvent e){}

    //a simple timer 
    class Timer extends Thread{
           int time = 10;
           public void run(){
     while(time-- > 0){
       System.out.println("Still Waiting:" + time);
               try{
                 sleep(500);                     
               }catch(InterruptedException e){}
             }
             System.out.println("About to close");
    //close the frame
            ClosingFrame.this.processWindowEvent(
                 new WindowEvent(
                       ClosingFrame.this, WindowEvent.WINDOW_CLOSED));
           }
    }

    //instantiate the Frame
public static void main(String args[]){
          new ClosingFrame();
    }

}

As you can see, the processWindowEvent() method causes the WindowClosed event to be fired where you have an oportunity to do some clean up code if you require before closing the application.

It seems that in lollipop and up (or maybe just a different WebView Version) that calling cprcrack's onHideCustomView() method does not work. It works if it is called from the exit fullscreen button but when you specifically call the method it will only exit fullscreen but the webView stays blank. A way around it is to simply add these lines of code to onHideCustomView():

String js = "javascript:";
js += "var _ytrp_html5_video = document.getElementsByTagName('video')[0];";
js += "_ytrp_html5_video.webkitExitFullscreen();";
webView.loadUrl(js);

This will notify the webView that fullscreen has exited.

for i in iterator:
    try:
        # Do something.
        pass
    except:
        # Continue to next iteration.
        continue

This is how I solved this problem. I created a special event handler that went into the code behind:

private void TextBox_KeyEnterUpdate(object sender, KeyEventArgs e)
{
    if (e.Key == Key.Enter)
    {
        TextBox tBox = (TextBox)sender;
        DependencyProperty prop = TextBox.TextProperty;

        BindingExpression binding = BindingOperations.GetBindingExpression(tBox, prop);
        if (binding != null) { binding.UpdateSource(); }
    }
}

Then I just added this as a KeyUp event handler in the XAML:

<TextBox Text="{Binding TextValue1}" KeyUp="TextBox_KeyEnterUpdate" />
<TextBox Text="{Binding TextValue2}" KeyUp="TextBox_KeyEnterUpdate" />

The event handler uses its sender reference to cause it's own binding to get updated. Since the event handler is self-contained then it should work in a complex DataTemplate. This one event handler can now be added to all the textboxes that need this feature.

Connecting android phone via USB cable and accessing http server on the Computer.

1. Firewall - switch it off, once everything works you can add a rule under Inbound rules, enable Apache HTTP Server (UDP and TCP) (or whatever HTTP server you're using) Warning - if you switch off the firewall, your computer becomes vulnerable to internet attacks. So switch off internet and disconnect from network first. You don't need to be on the Internet for this to work, as you're connecting two devices on local network.

2. Plug in the USB cable. If networking window pops up, select Home Network. If it doesn't pop up it's probably set to Public (which won't work), so go to: Control Panel\Network and Internet\Network and Sharing Center (in win7) and set it to Home Network there. It might give you a next screen after you press it to share Pictures, Music... just click cancel on it. On the main screen Home Network will still be active.

3. You need the Computer's IP, localhost or other aliases don't work. To get the IP of your machine, start the Windows command line shell (press Windows Key + R and type cmd), the black command prompt window should pop up, type: "ipconfig" and hit enter. Now look for

IPv4 Address. . . . . . . . . . . : 192.168.###.### That's the IP that your phone assigned to your computer

4. Now you should be done, in the phone's browser, try accessing a test html file from your computer's server it should display fine.

5. Now that everything is working you'll probably want to enable the firewall and Internet access on your computer. Now try accessing your http server again. It probably won't work. Depending on your setup you might get a popup asking you to add a rule to allow it, but if you don't, just add it yourself. Start the windows firewall and go to Inbound Rules (because it's a server) and add New Rule. Select "Program". Locate the exe of your http server, and in the next screen make sure Allow is selected. Try connecting again, and now it should work. If not it's probably because you selected wrong exe. You can even go more advanced to restrict outside usage (because now everyone on the internet can access it if they have your Internet IP address) To restrict access you can right-click on the new rule you've just created, click Properties, and go to Scope tab and change things there accordingly.

   Note for Android developers, now in your android code, you have to use "http://", otherwise it won't work. For example: MyAsyncTask.execute("http://192.168.123.123/test.html")

Part II -- Setting IP to fixed/static.

Now that things work, every time you unplug the cable and plug it back in, your IP will change. And if you are using it somewhere like inside a code, you'll have to update it every time! Solution I've come up with is to set the IP to static.

1. Having the phone connected and tethered, go back to Network and Sharing Center and click on the Local Area connection "Connections:"

2. On the next screen select Properties, then highlight IP 4 and press properties there and click "Use the following IP address"
3. Put Default Gateway and Subnet Mask exactly as it was in the ipconfig, and for the IP Address, only change the last 3 digits to anything from 1 to 255

That IP will be your new fixed/static IP and it will remain the same next time you plug the phone.

Facebook uses a frame and inside of it everything functions using AJAX communication. The biggest problem in this case is preserving the current page state. As far I understand, Facebook decided to use simulated anchors. This means if you clicked somewhere, they simulate that as an anchor inside of your page, and when the AJAX communication starts, they change the anchor bit of your URL as well.

This solution helps you normally when you try to reload the page (not ENTER, press F5), because your browser sends the whole URL with anchors to the Facebook server. Therefore Facebook picks up the latest state (what you see) and you are then able to continue from there.

When the callback returns with #_=_ it means that the page was in its basic state prior to leaving it. Because this anchor is parsed by the browser, you need not worry about it.

Try this:

"dependencies" : {
  "name1" : "git://github.com/user/project.git#commit-ish",
  "name2" : "git://github.com/user/project.git#commit-ish"
}

You could also try this, where visionmedia/express is name/repo:

"dependencies" : {
   "express" : "visionmedia/express"
}

Or (if the npm package module exists):

"dependencies" : {
  "name": "*"
}

Taken from NPM docs

Look here http://docs.oracle.com/javase/6/docs/api/java/awt/Font.html#deriveFont%28float%29

JComponent has a setFont() method. You will control the font there, not on the String.

Such as

JButton b = new JButton();
b.setFont(b.getFont().deriveFont(18.0f));

It is useful for Linux people. My problem was trivial, I used chromium-browser. I installed chrome and all problems were resolved. It could work with chromium but with extra actions. I did not receive a success. I could set a need driver version to protractor configuration. It used the latest. I needed a downgrade.

Could be a few problems here depending on what version of grunt is being used. Newer versions of grunt actually specify that you have a file named Gruntfile.js (instead of the old grunt.js).

You should have the grunt-cli tool be installed globally (this is done via npm install -g grunt-cli). This allows you to actually run grunt commands from the command line.

Secondly make sure you've installed grunt locally for your project. If you see your package.json doesn't have something like "grunt": "0.4.5" in it then you should do npm install grunt --save in your project directory.

There's a special function n() in dplyr to count rows (potentially within groups):

library(dplyr)
mtcars %>% 
  group_by(cyl, gear) %>% 
  summarise(n = n())
#Source: local data frame [8 x 3]
#Groups: cyl [?]
#
#    cyl  gear     n
#  (dbl) (dbl) (int)
#1     4     3     1
#2     4     4     8
#3     4     5     2
#4     6     3     2
#5     6     4     4
#6     6     5     1
#7     8     3    12
#8     8     5     2

But dplyr also offers a handy count function which does exactly the same with less typing:

count(mtcars, cyl, gear)          # or mtcars %>% count(cyl, gear)
#Source: local data frame [8 x 3]
#Groups: cyl [?]
#
#    cyl  gear     n
#  (dbl) (dbl) (int)
#1     4     3     1
#2     4     4     8
#3     4     5     2
#4     6     3     2
#5     6     4     4
#6     6     5     1
#7     8     3    12
#8     8     5     2

echo '
<html>
<body>
</body>
</html>
';

or

echo "<html>\n<body>\n</body>\n</html>\n";

Try marking the field with [NonSerialized()] attribute. This will tell the serializer to ignore the field.

https://msdn.microsoft.com/en-us/library/system.nonserializedattribute(v=vs.110).aspx

rx = r'\b(?<=\w){0}\b(?!\w)'.format(TEXTO)

Projection: what ever typed in select clause i.e, 'column list' or '*' or 'expressions' that becomes under projection.

*selection:*what type of conditions we are applying on that columns i.e, getting the records that comes under selection.

For example:

  SELECT empno,ename,dno,job from Emp 
     WHERE job='CLERK'; 

in the above query the columns "empno,ename,dno,job" those comes under projection, "where job='clerk'" comes under selection

This has worked well for me:

class JsonSerializable(object):

    def serialize(self):
        return json.dumps(self.__dict__)

    def __repr__(self):
        return self.serialize()

    @staticmethod
    def dumper(obj):
        if "serialize" in dir(obj):
            return obj.serialize()

        return obj.__dict__

and then

class FileItem(JsonSerializable):
    ...

and

log.debug(json.dumps(<my object>, default=JsonSerializable.dumper, indent=2))

You want the "popen" function. Here's an example of running the command "ls /etc" and outputing to the console.

#include <stdio.h>
#include <stdlib.h>


int main( int argc, char *argv[] )
{

  FILE *fp;
  char path[1035];

  /* Open the command for reading. */
  fp = popen("/bin/ls /etc/", "r");
  if (fp == NULL) {
    printf("Failed to run command\n" );
    exit(1);
  }

  /* Read the output a line at a time - output it. */
  while (fgets(path, sizeof(path), fp) != NULL) {
    printf("%s", path);
  }

  /* close */
  pclose(fp);

  return 0;
}

This is a translation of Mike's Ruby version, into Common Lisp:

(defun perms (x y original-string)
  (loop with all = (list "")
        with current-array = (list "")
        for iteration from 1 to y
        do (loop with next-array = nil
                 for string in current-array
                 do (loop for c across original-string
                          for value = (concatenate 'string string (string c))
                          do (push value next-array)
                             (push value all))
                    (setf current-array (reverse next-array)))
        finally (return (nreverse (delete-if #'(lambda (el) (< (length el) x)) all)))))

And another version, slightly shorter and using more loop facility features:

(defun perms (x y original-string)
  (loop repeat y
        collect (loop for string in (or (car (last sets)) (list ""))
                      append (loop for c across original-string
                                   collect (concatenate 'string string (string c)))) into sets
        finally (return (loop for set in sets
                              append (loop for el in set when (>= (length el) x) collect el)))))

If you simply need to answer "y" to all the overwrite prompts, try this:

y | mv srcdir/* targetdir/

You can do this too without the need to use [(ngModel)] in your <select> tag

Declare a variable in your ts file

toStr = JSON.stringify;

and in you template do this

 <option *ngFor="let v of values;" [value]="toStr(v)">
      {{v}}
 </option>

and then use

let value=JSON.parse(event.target.value)

to parse the string back into a valid JavaScript object

I assume the original question included how does Express use this environment variable.

Express uses NODE_ENV to alter its own default behavior. For example, in development mode, the default error handler will send back a stacktrace to the browser. In production mode, the response is simply Internal Server Error, to avoid leaking implementation details to the world.

next() is read until the space of the encounter, and the nextLine() is read to the end of the line. Scanner scan = new Scanner(System.in);
String address = scan.next();
s += scan.nextLine();

Delete "button" before # rock:

button #rock {
    background: url(img/rock.png) no-repeat;
} 

Worked for me in Google Chrome.

The "problem" really is that you're sourcing and not executing the script. When you source a file, its contents will be executed in the current shell, instead of spawning a subshell. So everything, including exit, will affect the current shell.

Instead of using exit, you will want to use return.

You could do this:

echo "<script>alert('Successfully Updated'); window.location = './edit.php';</script>";

//JAVA PART

@RequestMapping(value = "/report-excel", method = RequestMethod.GET)
    public ResponseEntity<byte[]> getReportExcel(@RequestParam("bookingStatusType") String bookingStatusType,
            @RequestParam("endDate") String endDate, @RequestParam("product") String product, @RequestParam("startDate") String startDate)throws IOException, ParseException {

//Generate Excel from DTO using any logic after that do the following
byte[] body = wb.getBytes();
HttpHeaders header = new HttpHeaders();
        header.setContentType(new MediaType("application", "xlsx"));
        header.set("Content-Disposition", "inline; filename=" + fileName);
        header.setCacheControl("must-revalidate, post-check=0, pre-check=0");
        header.setContentLength(body.length);

 return new ResponseEntity<byte[]>(body, header, HttpStatus.OK);
}



//HTML PART
<html>
<head>
<title>Test</title>
<meta http-equiv="content-type" content="application/x-www-form-urlencoded; charset=UTF-8">
</head>
<body>
  <form name="downloadXLS" method="get" action="http://localhost:8080/rest/report-excel" enctype="multipart/form-data">
    <input type="text" name="bookingStatusType" value="SALES"></input>
    <input type="text" name="endDate" value="abcd"></input>
    <input type="text" name="product" value="FLIGHT"></input>
    <input type="text" name="startDate" value="abcd"></input>
    <input onclick="document.downloadXLS.submit()" value="Submit"></input>
  </form>
</body>
</html>

/(.+)/(\d{4}-\d{2}-\d{2})-(\d+)(/.*)?$

1st Capturing Group (.+)

.+ matches any character (except for line terminators)

• + Quantifier — Matches between one and unlimited times, as many times as possible, giving back as needed (greedy)

2nd Capturing Group (\d{4}-\d{2}-\d{2})

\d{4} matches a digit (equal to [0-9])

• {4} Quantifier — Matches exactly 4 times

- matches the character - literally (case sensitive)

\d{2} matches a digit (equal to [0-9])

• {2} Quantifier — Matches exactly 2 times

- matches the character - literally (case sensitive)

\d{2} matches a digit (equal to [0-9])

• {2} Quantifier — Matches exactly 2 times

- matches the character - literally (case sensitive)

3rd Capturing Group (\d+)

\d+ matches a digit (equal to [0-9])

• + Quantifier — Matches between one and unlimited times, as many times as possible, giving back as needed (greedy)

4th Capturing Group (.*)?

? Quantifier — Matches between zero and one times, as many times as possible, giving back as needed (greedy)

.* matches any character (except for line terminators)

• * Quantifier — Matches between zero and unlimited times, as many times as possible, giving back as needed (greedy)

$ asserts position at the end of the string

My work uses Winnovative's PDF generator (We've used it mainly to convert HTML to PDF, but you can generate it other ways as well)

Add

<form target="_blank" ...></form>

or

form.setAttribute("target", "_blank");

to your form's definition.

Strace Overview
strace can be seen as a light weight debugger. It allows a programmer / user to quickly find out how a program is interacting with the OS. It does this by monitoring system calls and signals.

Uses
Good for when you don't have source code or don't want to be bothered to really go through it.
Also, useful for your own code if you don't feel like opening up GDB, but are just interested in understanding external interaction.

A good little introduction
I ran into this intro to strace use just the other day: strace hello world

Just add this global script, which closes all the modal dialogs just clicking outsite them.

$(document).ready(function()
{
    $(document.body).on("click", ".ui-widget-overlay", function()
    {
        $.each($(".ui-dialog"), function()
        {
            var $dialog;
            $dialog = $(this).children(".ui-dialog-content");
            if($dialog.dialog("option", "modal"))
            {
                $dialog.dialog("close");
            }
        });
    });;
});

"(string)o" will result in an InvalidCastException as there's no direct cast.

"o as string" will result in s being a null reference, rather than an exception being thrown.

"o.ToString()" isn't a cast of any sort per-se, it's a method that's implemented by object, and thus in one way or another, by every class in .net that "does something" with the instance of the class it's called on and returns a string.

Don't forget that for converting to string, there's also Convert.ToString(someType instanceOfThatType) where someType is one of a set of types, essentially the frameworks base types.

You're in luck, I use the exact thing in my CMS

When you want to store the order, just call the JavaScript method saveOrder(). It will make an AJAX POST request to saveorder.php, but of course you could always post it as a regular form.

<script type="text/javascript">
function saveOrder() {
    var articleorder="";
    $("#sortable li").each(function(i) {
        if (articleorder=='')
            articleorder = $(this).attr('data-article-id');
        else
            articleorder += "," + $(this).attr('data-article-id');
    });
            //articleorder now contains a comma separated list of the ID's of the articles in the correct order.
    $.post('/saveorder.php', { order: articleorder })
        .success(function(data) {
            alert('saved');
        })
        .error(function(data) { 
            alert('Error: ' + data); 
        }); 
}
</script>
<ul id="sortable">
<?php
//my way to get all the articles, but you should of course use your own method.
$articles = Page::Articles();
foreach($articles as $article) {
    ?>
    <li data-article-id='<?=$article->Id()?>'><?=$article->Title()?></li>
    <?
}               
?>   
</ul>
   <input type='button' value='Save order' onclick='saveOrder();'/>

In saveorder.php; Keep in mind I removed all verification and checking.

<?php
$orderlist = explode(',', $_POST['order']);
foreach ($orderlist as $k=>$order) {
  echo 'Id for position ' . $k . ' = ' . $order . '<br>';
}     
?>

I'm not sure if you need source code. There is a free online JavaScript formatter at http://www.blackbeltcoder.com/Resources/JSFormatter.aspx.

It seems to be a bug in Swift. See discussion on Apple developers portal

It is said to be fixed in Xcode version that is about to be released. But for now there is temporary workaround:

Go to your target Build Settings and set Reflection Metadata Level flag to None

The problem here is the performance, if you have a lot of rows it will be a problem.

If it is your case, please try with this:

import pandas as pd

source = pd.DataFrame({'Country' : ['USA', 'USA', 'Russia','USA'], 
              'City' : ['New-York', 'New-York', 'Sankt-Petersburg', 'New-York'],
              'Short_name' : ['NY','New','Spb','NY']})

source.groupby(['Country','City']).agg(lambda x:x.value_counts().index[0])

source.groupby(['Country','City']).Short_name.value_counts().groupby['Country','City']).first()

You can use this

whereDate('date', '=', $date)

If you give whereDate then compare only date from datetime field.

First of all, it is a waste of an executor slot to wrap the build step in node. Your upstream executor will just be sitting idle for no reason.

Second, from a multibranch project, you can use the environment variable BRANCH_NAME to make logic conditional on the current branch.

Third, the job parameter takes an absolute or relative job name. If you give a name without any path qualification, that would refer to another job in the same folder, which in the case of a multibranch project would mean another branch of the same repository.

Thus what you meant to write is probably

if (env.BRANCH_NAME == 'master') {
    build '../other-repo/master'
}

Another alternative which is similar to the accepted answer by @BenBolker is redefining the coordinates of the existing plot when adding a second set of points.

Here is a minimal example.

Data:

x  <- 1:10
y1 <- rnorm(10, 100, 20)
y2 <- rnorm(10, 1, 1)

Plot:

par(mar=c(5,5,5,5)+0.1, las=1)

plot.new()
plot.window(xlim=range(x), ylim=range(y1))
points(x, y1, col="red", pch=19)
axis(1)
axis(2, col.axis="red")
box()

plot.window(xlim=range(x), ylim=range(y2))
points(x, y2, col="limegreen", pch=19)
axis(4, col.axis="limegreen")

Simply

MsgBox(GridView1.CurrentCell.Value.ToString)

My test results:

callto:

• Nokia Browser: nothing happens
• Google Chrome: asks to run skype to call the number
• Firefox: asks to choose a program to call the number
• IE: asks to run skype to call the number

tel:

• Nokia Browser: working
• Google Chrome: nothing happens
• Firefox: "Firefox doesnt know how to open this url"
• IE: could not find url

No. Apps can only modify files within the documents directory, within their own sandbox. This is for security, and ease of installing/uninstalling. So you could only do this on a jailbroken device.

Indeed, set in DOS has no option to allow for arithmetic. You could do a giant lookup table, though:

if %COUNTER%==249 set COUNTER=250
...
if %COUNTER%==3 set COUNTER=4
if %COUNTER%==2 set COUNTER=3
if %COUNTER%==1 set COUNTER=2
if %COUNTER%==0 set COUNTER=1

Or you can use the more obvious solution, right in the GUI: Tools -> Messages (set verbosity to 2)...

FileZilla does not have any command line arguments (nor any other way) that allow an automatic transfer.

Some references:

• FileZilla Client command-line arguments
• https://trac.filezilla-project.org/ticket/2317
• How do I send a file with FileZilla from the command line?

Though you can use any other client that allows automation.

You have not specified, what protocol you are using. FTP or SFTP? You will definitely be able to use WinSCP, as it supports all protocols that FileZilla does (and more).

Combine WinSCP scripting capabilities with Windows Scheduler:

• Automate file transfers to FTP server or SFTP server;
• Schedule file transfers to FTP/SFTP server

A typical WinSCP script for upload (with SFTP) looks like:

open sftp://user:[email protected]/ -hostkey="ssh-rsa 2048 xxxxxxxxxxx...="
put c:\mypdfs\*.pdf /home/user/
close

With FTP, just replace the sftp:// with the ftp:// and remove the -hostkey="..." switch.

Similarly for download: How to schedule an automatic FTP download on Windows?

WinSCP can even generate a script from an imported FileZilla session.

For details, see the guide to FileZilla automation.

(I'm the author of WinSCP)

Another option, if you are using SFTP, is the psftp.exe client from PuTTY suite.

The advantages of CXF:

1. CXF supports for WS-Addressing, WS-Policy, WS-RM, WS-Security and WS-I BasicProfile.
2. CXF implements JAX-WS API (according by JAX-WS 2.0 TCK).
3. CXF has better integration with Spring and other frameworks.
4. CXF has high extensibility in terms of their interceptor strategy.
5. CXF has more configurable feature via the API instead of cumbersome XML files.
6. CXF has Bindings:SOAP,REST/HTTP, and its Data Bindings support JAXB 2.0,Aegis, by default it use JAXB 2.0 and more close Java standard specification.
7. CXF has abundant toolkits, e.g. Java to WSDL, WSDL to Java, XSD to WSDL, WSDL to XML, WSDL to SOAP, WSDL to Service.

The advantages of Axis2:

1. Axis2 also supports WS-RM, WS-Security, and WS-I BasicProfile except for WS-Policy, I expect it will be supported in an upcoming version.
2. Axis has more options for data bindings for your choose
3. Axis2 supports multiple languages—including C/C++ version and Java version.
4. Axis2 supports a wider range of data bindings, including XMLBeans, JiBX, JaxMe and JaxBRI as well as its own native data binding, ADB. longer history than CXF.

In Summary: From above advantage items, it brings us to a good thoughts to compare Axis2 and CXF on their own merits. they all have different well-developed areas in a certain field, CXF is very configurable, integratable and has rich tool kits supported and close to Java community, Axis2 has taken an approach that makes it in many ways resemble an application server in miniature. it is across multiple programming languages. because its Independence, Axis2 lends itself towards web services that stand alone, independent of other applications, and offers a wide variety of functionality.

As a developer, we need to accord our perspective to choose the right one, whichever framework you choose, you’ll have the benefit of an active and stable open source community. In terms of performance, I did a test based the same functionality and configed in the same web container, the result shows that CXF performed little bit better than Axis2, the single case may not exactly reflect their capabilities and performance.

In some research articles, it reveals that Axis2's proprietary ADB databinding is a bit faster than CXF since it don’t have additional feature(WS-Security). Apache AXIS2 is relatively most used framework but Apache CXF scores over other Web Services Framework comparatively considering ease of development, current industry trend, performance, overall scorecard and other features (unless there is Web Services Orchestration support is explicitly needed, which is not required here)

You can use the "Join" function to create a single string out of the array of labels, like this:

=Join(Parameters!Product.Label, ",")

There is a way to run php in client-side javascript (not talking about server-side js here). Don't know if this is a very good idea, but you can. As some people pointed out you have to keep in mind the php is evaluated on the server and then returned as static stuff to the browser who will then run the javascript with the added data from the server.

You have to tell the server to evaluate the js files as php files, if you are running an apache server you can do this with a htaccess-file like this:

<FilesMatch "\.js$">
SetHandler application/x-httpd-php
Header set Content-type "application/javascript"
</FilesMatch>

More info here:

Parse js/css as a PHP file using htaccess

http://css-tricks.com/snippets/htaccess/use-php-inside-javascript/

Edit: On http page request this trick makes files with js extension be parsed by the php compiler. All php parts in the js file will get executed and the js file with added server data will be handed to the browser.

However, the OP uses an html formated file (probably with php extension), no js file, so in this specific case there's no need for my suggestion.

The suggested js solutions are the way to go. If the variable needs to get stored on the server, use ajax to send it there.

add this styles

animation-iteration-count:infinite;

EDIT: Original question did not specify language. My answer is in C#.

You should instead use HashSet for this purpose. If you must use ArrayList, you could use the following extension methods:

var a = arrayListA.Cast<DateTime>();
var b = arrayListB.Cast<DateTime>();    
var c = b.Except(a);

var arrayListC = new ArrayList(c.ToArray());

using HashSet...

var a = new HashSet<DateTime>(); // ...and fill it
var b = new HashSet<DateTime>(); // ...and fill it
b.ExceptWith(a); // removes from b items that are in a

When creating a New Project, under the language of your choice, select Web and then change to .NET Framework 3.5 and you will get the option of creating an ASP.NET WEB Service Application.

Check Using Filename filters like DB_*/**/*.sql

Here is a variation to perform an action if one or more files exist corresponding to a wildcard filter. That is, you don't know the exact name of the file.

Here, we are looking for "*.sql" files in any sub-directories called "DB_*", recursively. You can adjust the filter to your needs.

NB: Apache Ant 1.7 and higher!

Here is the target to set a property if matching files exist:

<target name="check_for_sql_files">
    <condition property="sql_to_deploy">
        <resourcecount when="greater" count="0">
            <fileset dir="." includes="DB_*/**/*.sql"/>
        </resourcecount>
    </condition>
</target>

Here is a "conditional" target that only runs if files exist:

<target name="do_stuff" depends="check_for_sql_files" if="sql_to_deploy">
    <!-- Do stuff here -->
</target>

I solved this error

A connection attempt failed with "ECONNREFUSED - Connection refused by server"

by changing my port to 22 that was successful

I just had this error message happen. When searching for why, I figured out that there's a related issue that can occur if you're not paying attention - the same error occurs if the directory you are trying to move into does not exist.

Under System.IO, there is a class called Directory. Do the following:

If Not Directory.Exists(path) Then
    Directory.CreateDirectory(path)
End If

It will ensure that the directory is there.

Hm, now (23 Jan 2017 with angular 2.4.3) I made it work like this:

newHero() {
    return this.model = new Hero(42, 'APPLIED VALUE', '');
}
<button type="button" class="btn btn-default" (click)="heroForm.resetForm(newHero())">New Hero</button>

Hibernate Criteria API (not plain SQL though, but very powerful and in active development):

List sales = session.createCriteria(Sale.class)
         .add(Expression.ge("date",startDate);
         .add(Expression.le("date",endDate);
         .addOrder( Order.asc("date") )
         .setFirstResult(0)
         .setMaxResults(10)
         .list();

jQuery has a method to check if something is a function

if ($.isFunction($.fn.dateJS)) {
    //your code using the plugin
}

API reference: https://api.jquery.com/jQuery.isFunction/

You don't necessarily need the BouncyCastle library. The following code shows how to do so using the Integer.toHexString function

public static String sha256(String base) {
    try{
        MessageDigest digest = MessageDigest.getInstance("SHA-256");
        byte[] hash = digest.digest(base.getBytes("UTF-8"));
        StringBuffer hexString = new StringBuffer();

        for (int i = 0; i < hash.length; i++) {
            String hex = Integer.toHexString(0xff & hash[i]);
            if(hex.length() == 1) hexString.append('0');
            hexString.append(hex);
        }

        return hexString.toString();
    } catch(Exception ex){
       throw new RuntimeException(ex);
    }
}

Special thanks to user1452273 from this post: How to hash some string with sha256 in Java?

Keep up the good work !

The ssh2 functions aren't very good. Hard to use and harder yet to install, using them will guarantee that your code has zero portability. My recommendation would be to use phpseclib, a pure PHP SFTP implementation.

The mod_authz_host directives need to be inside a <Location> or <Directory> block but I've used the former within <VirtualHost> like so for Apache 2.2:

<VirtualHost *:8080>
    <Location />
    Order deny,allow
    Deny from all
    Allow from 127.0.0.1
    </Location>

    ...
</VirtualHost>

Reference: https://askubuntu.com/questions/262981/how-to-install-mod-authz-host-in-apache

If you are trying to do redirect in beforeAction() you should use send() method

 return $this->redirect('/some/url',302)->send();

In MVVM (wich makes a lot of things a lot easier - you should try it) you would have two properties in your ViewModel Text that is bound to your TextBox and you would have an ICommand property Apply (or similar) that is bound to the button:

<Button Command="Apply">Apply</Button>

The ICommand interface has a Method CanExecute that is where you return true if (!string.IsNullOrWhiteSpace(this.Text). The rest is done by WPF for you (enabling/disabling, executing the actual command on click).

The linked article explains it in detail.

What is java.lang.StackOverflowError

The error java.lang.StackOverflowError is thrown to indicate that the application’s stack was exhausted, due to deep recursion i.e your program/script recurses too deeply.

Details

The StackOverflowError extends VirtualMachineError class which indicates that the JVM have been or have run out of resources and cannot operate further. The VirtualMachineError which extends the Error class is used to indicate those serious problems that an application should not catch. A method may not declare such errors in its throw clause because these errors are abnormal conditions that was never expected to occur.

An Example

Minimal, Complete, and Verifiable Example :

package demo;

public class StackOverflowErrorExample {

    public static void main(String[] args) 
    {
        StackOverflowErrorExample.recursivePrint(1);
    }

    public static void recursivePrint(int num) {
        System.out.println("Number: " + num);

        if(num == 0)
            return;
        else
            recursivePrint(++num);
    }

}

Console Output

Number: 1
Number: 2
.
.
.
Number: 8645
Number: 8646
Number: 8647Exception in thread "main" java.lang.StackOverflowError
    at java.io.FileOutputStream.write(Unknown Source)
    at java.io.BufferedOutputStream.flushBuffer(Unknown Source)
    at java.io.BufferedOutputStream.flush(Unknown Source)
    at java.io.PrintStream.write(Unknown Source)
    at sun.nio.cs.StreamEncoder.writeBytes(Unknown Source)
    at sun.nio.cs.StreamEncoder.implFlushBuffer(Unknown Source)
    at sun.nio.cs.StreamEncoder.flushBuffer(Unknown Source)
    at java.io.OutputStreamWriter.flushBuffer(Unknown Source)
    at java.io.PrintStream.newLine(Unknown Source)
    at java.io.PrintStream.println(Unknown Source)
    at demo.StackOverflowErrorExample.recursivePrint(StackOverflowErrorExample.java:11)
    at demo.StackOverflowErrorExample.recursivePrint(StackOverflowErrorExample.java:16)
    .
    .
    .
    at demo.StackOverflowErrorExample.recursivePrint(StackOverflowErrorExample.java:16)

Explaination

When a function call is invoked by a Java Application, a stack frame is allocated on the call stack. The stack frame contains the parameters of the invoked method, its local parameters, and the return address of the method. The return address denotes the execution point from which, the program execution shall continue after the invoked method returns. If there is no space for a new stack frame then, the StackOverflowError is thrown by the Java Virtual Machine (JVM).

The most common case that can possibly exhaust a Java application’s stack is recursion. In recursion, a method invokes itself during its execution. Recursion one of the most powerful general-purpose programming technique, but must be used with caution, in order for the StackOverflowError to be avoided.

References

• Java Doc
• StackOverflowError

The problem is that .click only works for elements already on the page. You have to use something like on if you are wiring up future elements

$("#LangTable").on("click",".deletelanguage", function(){
  alert("success");
});

You can try

$('#id1 p').each(function() {
    var text = $(this).text();
    $(this).text(text.replace('dog', 'doll')); 
});

http://jsfiddle.net/2EvGF/

You could use instead .html() and/or further sophisticate the .replace() call according to your needs

If you are using Java8 or + version, JDBC and MySql8 and facing this issue then try this:

Add parameter to connection string:

jdbc:mysql://localhost:3306/tempDB?allowLoadLocalInfile=true

Also, set

local_infile = 1

in my.cnf file.

The latest version of mysql-java-connector might be wont allow directly to connect to local file. So with this parameter, you can able to enable it. This works for me.

for i, row in df.iterrows():
    if <something>:
        df.at[i, 'ifor'] = x
    else:
        df.at[i, 'ifor'] = y

As it happens I was just reading about this this morning on my way to work in Java Concurrency In Practice by Brian Goetz. Basically he says you should do one of three things

1. Propagate the InterruptedException - Declare your method to throw the checked InterruptedException so that your caller has to deal with it.

2. Restore the Interrupt - Sometimes you cannot throw InterruptedException. In these cases you should catch the InterruptedException and restore the interrupt status by calling the interrupt() method on the currentThread so the code higher up the call stack can see that an interrupt was issued, and quickly return from the method. Note: this is only applicable when your method has "try" or "best effort" semantics, i. e. nothing critical would happen if the method doesn't accomplish its goal. For example, log() or sendMetric() may be such method, or boolean tryTransferMoney(), but not void transferMoney(). See here for more details.

3. Ignore the interruption within method, but restore the status upon exit - e. g. via Guava's Uninterruptibles. Uninterruptibles take over the boilerplate code like in the Noncancelable Task example in JCIP § 7.1.3.

This could be due to a face palm moment: if you switch between several clones it is easy to find yourself in the wrong source tree trying to pull a non-existent branch. It is easier when the clones have similar names, or the repos are distinct clones for the same project from each of multiple contributors. A new git clone would obviously seem to solve that "problem" when the real problem is losing focus or working context or both.

You can use either:

ActiveCell.Interior.ColorIndex = 28

or

ActiveCell.Interior.Color = RGB(255,0,0)

In Angular 8, ViewChild has another param

@ViewChild('nameInput', {static: false}) component

I resolved my issue like below

@ViewChild(MatSort, {static: false}) sort: MatSort;

you can have pointers for literals as well. You have to implement them yourself. It is pretty basic for experts ;). Use an array of int/object/long/byte and voila you have the basics for implementing pointers. Now any int value can be a pointer to that array int[]. You can increment the pointer, you can decrement the pointer, you can multiply the pointer. You indeed have pointer arithmetics! That's the only way to implements 1000 int attributes classes and have a generic method that applies to all attributes. You can also use a byte[] array instead of an int[]

However I do wish Java would let you pass literal values by reference. Something along the lines

//(* telling you it is a pointer) public void myMethod(int* intValue);

        private static void DownloadRemoteImageFile(string uri, string fileName)
        {
            HttpWebRequest request = (HttpWebRequest)WebRequest.Create(uri);
            HttpWebResponse response = (HttpWebResponse)request.GetResponse();

            if ((response.StatusCode == HttpStatusCode.OK ||
                response.StatusCode == HttpStatusCode.Moved ||
                response.StatusCode == HttpStatusCode.Redirect) &&
                response.ContentType.StartsWith("image", StringComparison.OrdinalIgnoreCase)) 
            {
                using (Stream inputStream = response.GetResponseStream())
                using (Stream outputStream = File.OpenWrite(fileName))
                {
                    byte[] buffer = new byte[4096];
                    int bytesRead;
                    do
                    {
                        bytesRead = inputStream.Read(buffer, 0, buffer.Length);
                        outputStream.Write(buffer, 0, bytesRead);
                    } while (bytesRead != 0);
                }
            }
        }

ASP.NET Web API 2 really simplified it. For example, the following code:

public HttpResponseMessage GetProduct(int id)
{
    Product item = repository.Get(id);
    if (item == null)
    {
        var message = string.Format("Product with id = {0} not found", id);
        HttpError err = new HttpError(message);
        return Request.CreateResponse(HttpStatusCode.NotFound, err);
    }
    else
    {
        return Request.CreateResponse(HttpStatusCode.OK, item);
    }
}

returns the following content to the browser when the item is not found:

HTTP/1.1 404 Not Found
Content-Type: application/json; charset=utf-8
Date: Thu, 09 Aug 2012 23:27:18 GMT
Content-Length: 51

{
  "Message": "Product with id = 12 not found"
}

Suggestion: Don't throw HTTP Error 500 unless there is a catastrophic error (for example, WCF Fault Exception). Pick an appropriate HTTP status code that represents the state of your data. (See the apigee link below.)

Links:

• Exception Handling in ASP.NET Web API (asp.net) and
• RESTful API Design: what about errors? (apigee.com)

From Wikipedia:

UTC does not change with a change of seasons, but local time or civil time may change if a time zone jurisdiction observes daylight saving time (summer time). For example, local time on the east coast of the United States is five hours behind UTC during winter, but four hours behind while daylight saving is observed there.

So this is my code:

TimeSpan span = (DateTime.UtcNow - new DateTime(1970, 1, 1, 0, 0, 0, 0,DateTimeKind.Utc));
double unixTime = span.TotalSeconds;

I had exactly the same problem, where is wanted to copy a file into an external hard drive for backup purposes. If I wanted to copy a complete folder, then COPY was quite happy to create the destination folder and populate it with all the files. However, I wanted to copy a file once a day and add today's date to the file. COPY was happy to copy the file and rename it in the new format, but only as long as the destination folder already existed.

my copy command looked like this:

COPY C:\SRCFOLDER\MYFILE.doc D:\DESTFOLDER\MYFILE_YYYYMMDD.doc

Like you, I looked around for alternative switches or other copy type commands, but nothing really worked like I wanted it to. Then I thought about splitting out the two different requirements by simply adding a make directory ( MD or MKDIR ) command before the copy command.

So now i have

MKDIR D:\DESTFOLDER

COPY C:\SRCFOLDER\MYFILE.doc D:\DESTFOLDER\MYFILE_YYYYMMDD.doc

If the destination folder does NOT exist, then it creates it. If the destination folder DOES exist, then it generates an error message.. BUT, this does not stop the batch file from continuing on to the copy command.

The error message says: A subdirectory or file D:\DESTFOLDER already exists

As i said, the error message doesn't stop the batch file working and it is a really simple fix to the problem.

Hope that this helps.

I was facing the same problem. For my solution, I added br enclosed between 2 brackets < > enclosed in double quotation marks, and preceded and followed by the + sign:

+"<br>"+

Try this in your browser and see, it certainly works in my Internet Explorer.

I encountered some weird behaviour that did not reflect the actual code base so after some time trying several solutions, my problem was solved by manually deleting everything under /var/cache/tomcat8/

How about the JDK source code?

This can be helpful as well.

SELECT YEAR(0), MONTH(0), DAY(0);

or

SELECT YEAR(getdate()), MONTH(getdate()), DAY(getdate());

or

SELECT YEAR(yourDateField), MONTH(yourDateField), DAY(yourDateField);

You mean this:

jQuery("input.first").click(function(){
   jQuery("input.second").trigger('click');
   return false;
});

Code of Sam is good but I think it need some correction,

Public Sub SelectFirstBlankCell()
    Dim sourceCol As Integer, rowCount As Integer, currentRow As Integer
    Dim currentRowValue As String

    sourceCol = 6   'column F has a value of 6
    rowCount = Cells(Rows.Count, sourceCol).End(xlUp).Row

    'for every row, find the first blank cell and select it
    For currentRow = 1 To rowCount
        currentRowValue = Cells(currentRow, sourceCol).Value
        If IsEmpty(currentRowValue) Or currentRowValue = "" Then
            Cells(currentRow, sourceCol).Select
            Exit For 'This is missing...
        End If
    Next
End Sub

Thanks

When compiling for x64, the difference between int and long is somewhere between 0 and 4 bytes, depending on what compiler you use.

GCC uses the LP64 model, which means that ints are 32-bits but longs are 64-bits under 64-bit mode.

MSVC for example uses the LLP64 model, which means both ints and longs are 32-bits even in 64-bit mode.

CookieManager.getInstance().setAcceptCookie(true); Normally it should work if your webview is already initialized

or try this:

CookieSyncManager.createInstance(this);
CookieManager cookieManager = CookieManager.getInstance();
cookieManager.removeAllCookie();
cookieManager.setAcceptCookie(true);

Can be about 20% faster by using just one comparison per char and for instead of foreach:

bool isDigits(string s) 
{ 
    if (s == null || s == "") return false; 

    for (int i = 0; i < s.Length; i++) 
        if ((s[i] ^ '0') > 9) 
            return false; 

    return true; 
}

Code used for testing (always profile because the results depend on hardware, versions, order, etc.):

static bool isDigitsFr(string s) { if (s == null || s == "") return false; for (int i = 0; i < s.Length; i++) if (s[i] < '0' || s[i] > '9') return false; return true; }
static bool isDigitsFu(string s) { if (s == null || s == "") return false; for (int i = 0; i < s.Length; i++) if ((uint)(s[i] - '0') > 9) return false; return true; }
static bool isDigitsFx(string s) { if (s == null || s == "") return false; for (int i = 0; i < s.Length; i++) if ((s[i] ^ '0') > 9) return false; return true; }
static bool isDigitsEr(string s) { if (s == null || s == "") return false; foreach (char c in s) if (c < '0' || c > '9') return false; return true; }
static bool isDigitsEu(string s) { if (s == null || s == "") return false; foreach (char c in s) if ((uint)(c - '0') > 9) return false; return true; }
static bool isDigitsEx(string s) { if (s == null || s == "") return false; foreach (char c in s) if ((c ^ '0') > 9) return false; return true; }
static void test()
{
    var w = new Stopwatch(); bool b; var s = int.MaxValue + ""; int r = 12345678*2; var ss = new SortedSet<string>(); //s = string.Concat(Enumerable.Range(0, 127).Select(i => ((char)i ^ '0') < 10 ? 1 : 0));
    w.Restart(); for (int i = 0; i < r; i++) b = s.All(char.IsDigit); w.Stop(); ss.Add(w.Elapsed + ".All .IsDigit"); 
    w.Restart(); for (int i = 0; i < r; i++) b = s.All(c => c >= '0' && c <= '9'); w.Stop(); ss.Add(w.Elapsed + ".All <>"); 
    w.Restart(); for (int i = 0; i < r; i++) b = s.All(c => (c ^ '0') < 10); w.Stop(); ss.Add(w.Elapsed + " .All ^"); 
    w.Restart(); for (int i = 0; i < r; i++) b = isDigitsFr(s); w.Stop(); ss.Add(w.Elapsed + " for     <>");
    w.Restart(); for (int i = 0; i < r; i++) b = isDigitsFu(s); w.Stop(); ss.Add(w.Elapsed + " for     -");
    w.Restart(); for (int i = 0; i < r; i++) b = isDigitsFx(s); w.Stop(); ss.Add(w.Elapsed + " for     ^");
    w.Restart(); for (int i = 0; i < r; i++) b = isDigitsEr(s); w.Stop(); ss.Add(w.Elapsed + " foreach <>");
    w.Restart(); for (int i = 0; i < r; i++) b = isDigitsEu(s); w.Stop(); ss.Add(w.Elapsed + " foreach -");
    w.Restart(); for (int i = 0; i < r; i++) b = isDigitsEx(s); w.Stop(); ss.Add(w.Elapsed + " foreach ^");
    MessageBox.Show(string.Join("\n", ss)); return;
}

Results on Intel i5-3470 @ 3.2GHz, VS 2015 .NET 4.6.1 Release mode and optimizations enabled:

time    method          ratio
0.7776  for     ^       1.0000 
0.7984  foreach -       1.0268 
0.8066  foreach ^       1.0372 
0.8940  for     -       1.1497 
0.8976  for     <>      1.1543 
0.9456  foreach <>      1.2160 
4.4559  .All <>         5.7303 
4.7791  .All ^          6.1458 
4.8539  .All. IsDigit   6.2421 

For anyone tempted to use the shorter methods, note that

• .All results in true for empty strings and exception for null strings
• char.IsDigit is true for all Unicode characters in the Nd category
• int.TryParse also allows white spase and sign characters

Additionally, you cannot use "null" as a value in a conditional assignment. e.g...

bool testvalue = false;
int? myint = (testvalue == true) ? 1234 : null;

FAILS with: Type of conditional expression cannot be determined because there is no implicit conversion between 'int' and '<null>'.

So, you have to cast the null as well... This works:

int? myint = (testvalue == true) ? 1234 : (int?)null;

The report definition is not valid or supported by this version of Reporting Services. This could be the result of publishing a report definition of a later version of Reporting Services, or that the report definition contains XML that is not well-formed or the XML is not valid based on the Report Definition schema.

I got this error when I used ReportSync to upload some .rdl files to SQL Server Report Services. In my case, the issue was that these .rdl files had some Text Box containing characters like ©, — (Em dash), – (En dash) characters, etc. When uploading .rdl files using ReportSync, I had to encode these characters (©, —, –, etc.) and use Placeholder Properties to set the Markup type to HTML in order to get rid of this error.

I wouldn't get this error If I manually uploaded each of the .rdl files one-by-one using SQL Server Reporting Services. But I have a lot of .rdl files and uploading each one individually would be time-consuming, which is why I use ReportSync to mass upload all .rdl files.

Sorry, if my answer doesn't seem relevant, but I hope this helps anyone else getting this error message when dealing with SSRS .rdl files.

Video Tutorial: Accessing the Camera with HTML5 & appMobi API will be helpful for you.

Also, you may try the getUserMedia method (supported by Opera 12)

There is not a really pythonic way of repeating something. However, it is a better way:

map(lambda index:do_something(), xrange(10))

If you need to pass the index then:

map(lambda index:do_something(index), xrange(10))

Consider that it returns the results as a collection. So, if you need to collect the results it can help.

Another suggestion would be to combine groupby with vectorized calculations if subsets of the rows shared characteristics which allowed you to do so.

I had exactly the same problem lately, and I installed Wireshark (it is a network monitoring tool). You can see everything with this, except encrypted traffic (HTTPS).

You can use CSS3 RGBA in this way:

rgba(255, 0, 0, 0.7);

0.7 means 70% opacity.

If you are looking for a Python implementation of find, this is a recipe I use rather frequently:

from findtools.find_files import (find_files, Match)

# Recursively find all *.sh files in **/usr/bin**
sh_files_pattern = Match(filetype='f', name='*.sh')
found_files = find_files(path='/usr/bin', match=sh_files_pattern)

for found_file in found_files:
    print found_file

So I made a PyPI package out of it and there is also a GitHub repository. I hope that someone finds it potentially useful for this code.

Whilst not a description of the differences, below are a couple of things to think about when choosing the correct method.

• GET requests can get cached by the browser which can be a problem (or benefit) when using ajax.
• GET requests expose parameters to users (POST does as well but they are less visible).
• POST can pass much more information to the server and can be of almost any length.

You'll need to create an array of the values in the enum, which can be created by calling System.Enum.GetValues(), passing it the Type of the enum that you want the items of.

If you specify this for the ItemsSource property, then it should be populated with all of the enum's values. You probably want to bind SelectedItem to EffectStyle (assuming it is a property of the same enum, and contains the current value).

There is a current bug in glibc on Ubuntu which can have this effect: https://bugs.launchpad.net/ubuntu/+source/glibc/+bug/1674733

To resolve it, update libc and all related (Packages that will be upgraded: libc-bin libc-dev-bin libc6 libc6-dev libfreetype6 libfreetype6-dev locales multiarch-support) and restart the server.

What I've done in the past is hash the key via something like SHA256, then extract the bytes from the hash into the key byte[].

After you have your byte[] you can simply do:

SecretKeySpec key = new SecretKeySpec(keyBytes, "AES");
Cipher cipher = Cipher.getInstance("AES");
cipher.init(Cipher.ENCRYPT_MODE, key);
byte[] encryptedBytes = cipher.doFinal(clearText.getBytes());

this way many people detect session has expired or not. the below code may help u.

protected void Page_Init(object sender, EventArgs e)
    {
        if (Context.Session != null)
        {
            if (Session.IsNewSession)
            {
                HttpCookie newSessionIdCookie = Request.Cookies["ASP.NET_SessionId"];
                if (newSessionIdCookie != null)
                {
                    string newSessionIdCookieValue = newSessionIdCookie.Value;
                    if (newSessionIdCookieValue != string.Empty)
                    {
                        // This means Session was timed Out and New Session was started
                        Response.Redirect("Login.aspx");
                    }
                }
            }
        }
    }

Is there a way to initialize the EntityManager without a persistence unit defined?

You should define at least one persistence unit in the persistence.xml deployment descriptor.

Can you give all the required properties to create an Entitymanager?

• The name attribute is required. The other attributes and elements are optional. (JPA specification). So this should be more or less your minimal persistence.xml file:

<persistence>
    <persistence-unit name="[REQUIRED_PERSISTENCE_UNIT_NAME_GOES_HERE]">
        SOME_PROPERTIES
    </persistence-unit>
</persistence>

In Java EE environments, the jta-data-source and non-jta-data-source elements are used to specify the global JNDI name of the JTA and/or non-JTA data source to be used by the persistence provider.

So if your target Application Server supports JTA (JBoss, Websphere, GlassFish), your persistence.xml looks like:

<persistence>
    <persistence-unit name="[REQUIRED_PERSISTENCE_UNIT_NAME_GOES_HERE]">
        <!--GLOBAL_JNDI_GOES_HERE-->
        <jta-data-source>jdbc/myDS</jta-data-source>
    </persistence-unit>
</persistence>

If your target Application Server does not support JTA (Tomcat), your persistence.xml looks like:

<persistence>
    <persistence-unit name="[REQUIRED_PERSISTENCE_UNIT_NAME_GOES_HERE]">
        <!--GLOBAL_JNDI_GOES_HERE-->
        <non-jta-data-source>jdbc/myDS</non-jta-data-source>
    </persistence-unit>
</persistence>

If your data source is not bound to a global JNDI (for instance, outside a Java EE container), so you would usually define JPA provider, driver, url, user and password properties. But property name depends on the JPA provider. So, for Hibernate as JPA provider, your persistence.xml file will looks like:

<persistence>
    <persistence-unit name="[REQUIRED_PERSISTENCE_UNIT_NAME_GOES_HERE]">
        <provider>org.hibernate.ejb.HibernatePersistence</provider>
        <class>br.com.persistence.SomeClass</class>
        <properties>
            <property name="hibernate.connection.driver_class" value="org.apache.derby.jdbc.ClientDriver"/>
            <property name="hibernate.connection.url" value="jdbc:derby://localhost:1527/EmpServDB;create=true"/>
            <property name="hibernate.connection.username" value="APP"/>
            <property name="hibernate.connection.password" value="APP"/>
        </properties>
    </persistence-unit>
</persistence>

Transaction Type Attribute

In general, in Java EE environments, a transaction-type of RESOURCE_LOCAL assumes that a non-JTA datasource will be provided. In a Java EE environment, if this element is not specified, the default is JTA. In a Java SE environment, if this element is not specified, a default of RESOURCE_LOCAL may be assumed.

• To insure the portability of a Java SE application, it is necessary to explicitly list the managed persistence classes that are included in the persistence unit (JPA specification)

I need to create the EntityManager from the user's specified values at runtime

So use this:

Map addedOrOverridenProperties = new HashMap();

// Let's suppose we are using Hibernate as JPA provider
addedOrOverridenProperties.put("hibernate.show_sql", true);

Persistence.createEntityManagerFactory(<PERSISTENCE_UNIT_NAME_GOES_HERE>, addedOrOverridenProperties);

I think this is best link for your solution to update postgres to 9.6

https://sandymadaan.wordpress.com/2017/02/21/upgrade-postgresql9-3-9-6-in-ubuntu-retaining-the-databases/

You can extend jQuery functionality like this :

Extend :

(function($){
    jQuery.fn.checkEmpty = function() {
       return !$.trim(this.html()).length;
    };
}(jQuery));

Use :

<div id="selector"></div>

if($("#selector").checkEmpty()){
     console.log("Empty");
}else{
     console.log("Not Empty");
}

stack is part of memory. it use for input and output of functions. also it use for remembering function's return.

esp register is remember the stack address.

stack and esp are implemented by hardware. also you can implement it yourself. it will make your program very slow.

example:

nop // esp = 0012ffc4

push 0 //esp = 0012ffc0 ,Dword[0012ffc0]=00000000

call proc01 // esp = 0012ffbc ,Dword[0012ffbc] = eip , eip = adrr[proc01]

pop eax // eax = Dword[esp], esp = esp + 4

I think you need to put it under src/main/resources and load it as follows:

props.load(new FileInputStream("src/main/resources/myconf.properties"));

The way you are trying to load it will first check in base folder of your project. If it is in target/classes and you want to load it from there do the following:

props.load(new FileInputStream("target/classes/myconf.properties"));

You can do so starting with Postgres 9.1:

with rows as (
INSERT INTO Table1 (name) VALUES ('a_title') RETURNING id
)
INSERT INTO Table2 (val)
SELECT id
FROM rows

In the meanwhile, if you're only interested in the id, you can do so with a trigger:

create function t1_ins_into_t2()
  returns trigger
as $$
begin
  insert into table2 (val) values (new.id);
  return new;
end;
$$ language plpgsql;

create trigger t1_ins_into_t2
  after insert on table1
for each row
execute procedure t1_ins_into_t2();

IF COL_LENGTH('table_name', 'column_name') IS NULL
BEGIN
    ALTER TABLE table_name
    ADD [column_name] INT
END

This is a known bug: link. Upcoming release 6.2.2 fixes this for OS X (Unfortunately, Linux version is still broken).

At least on my computer it's not dissapeared, just folded, and it's edge is almost merged with the edge of 'Action Output' block. When you move your mouse to that edge, the cursor starts looking like a dash with two arrows. Slowly move it couple of pixels higher until you catch the small 1px area where the cursor changes to a dash with a single arrow. Then catch it and pull : )

I've made a couple of photos to illustrate this.

I think the easiest way to do such thing is to resolve the routes later, you could ask the routes via json, for example. Check out that I make a factory out of the $routeProvider during config phase, via $provide, so I can keep using the $routeProvider object in the run phase, and even in controllers.

'use strict';

angular.module('myapp', []).config(function($provide, $routeProvider) {
    $provide.factory('$routeProvider', function () {
        return $routeProvider;
    });
}).run(function($routeProvider, $http) {
    $routeProvider.when('/', {
        templateUrl: 'views/main.html',
        controller: 'MainCtrl'
    }).otherwise({
        redirectTo: '/'
    });

    $http.get('/dynamic-routes.json').success(function(data) {
        $routeProvider.when('/', {
            templateUrl: 'views/main.html',
            controller: 'MainCtrl'
        });
        // you might need to call $route.reload() if the route changed
        $route.reload();
    });
});

• You can also unpack the axes in the subplots call

• And set whether you want to share the x and y axes between the subplots

Like this:

import matplotlib.pyplot as plt
fig, ((ax1, ax2), (ax3, ax4)) = plt.subplots(nrows=2, ncols=2, sharex=True, sharey=True)
ax1.plot(range(10), 'r')
ax2.plot(range(10), 'b')
ax3.plot(range(10), 'g')
ax4.plot(range(10), 'k')
plt.show()

Yes, it is possible to specify your own credentials without modifying the current code. It requires a small piece of code from your part though.

Create an assembly called SomeAssembly.dll with this class :

namespace SomeNameSpace
{
    public class MyProxy : IWebProxy
    {
        public ICredentials Credentials
        {
            get { return new NetworkCredential("user", "password"); }
            //or get { return new NetworkCredential("user", "password","domain"); }
            set { }
        }

        public Uri GetProxy(Uri destination)
        {
            return new Uri("http://my.proxy:8080");
        }

        public bool IsBypassed(Uri host)
        {
            return false;
        }
    }
}

Add this to your config file :

<defaultProxy enabled="true" useDefaultCredentials="false">
  <module type = "SomeNameSpace.MyProxy, SomeAssembly" />
</defaultProxy>

This "injects" a new proxy in the list, and because there are no default credentials, the WebRequest class will call your code first and request your own credentials. You will need to place the assemble SomeAssembly in the bin directory of your CMS application.

This is a somehow static code, and to get all strings like the user, password and URL, you might either need to implement your own ConfigurationSection, or add some information in the AppSettings, which is far more easier.

<table style="width: auto;" ... works fine. Tested in Chrome 38 , IE 11 and Firefox 34.

jsfiddle : http://jsfiddle.net/rpaul/taqodr8o/

echo "word1 word2" | cut -f 1 -d " "

cut cuts the 1st field (-f 1) from a list of fields delimited by the string " " (-d " ")

ng-class is a Directive of core AngularJs. In which you can use "String Syntax", "Array Syntax", "Evaluated Expression", " Ternary Operator" and many more options described below:

ngClass Using String Syntax

This is the simplest way to use ngClass. You can just add an Angular variable to ng-class and that is the class that will be used for that element.

<!-- whatever is typed into this input will be used as the class for the div below -->
<input type="text" ng-model="textType">

<!-- the class will be whatever is typed into the input box above -->
<div ng-class="textType">Look! I'm Words!

Demo Example of ngClass Using String Syntax

ngClass Using Array Syntax

This is similar to the string syntax method except you are able to apply multiple classes.

<!-- both input boxes below will be classes for the div -->
<input type="text" ng-model="styleOne">
<input type="text" ng-model="styleTwo">

<!-- this div will take on both classes from above -->
<div ng-class="[styleOne, styleTwo]">Look! I'm Words!

ngClass Using Evaluated Expression

A more advanced method of using ngClass (and one that you will probably use the most) is to evaluate an expression. The way this works is that if a variable or expression evaluates to true, you can apply a certain class. If not, then the class won't be applied.

<!-- input box to toggle a variable to true or false -->
<input type="checkbox" ng-model="awesome"> Are You Awesome?
<input type="checkbox" ng-model="giant"> Are You a Giant?

<!-- add the class 'text-success' if the variable 'awesome' is true -->
<div ng-class="{ 'text-success': awesome, 'text-large': giant }">

Example of ngClass Using Evaluated Expression

ngClass Using Value

This is similar to the evaluated expression method except you just able to compares multiple values with the only variable.

<div ng-class="{value1:'class1', value2:'class2'}[condition]"></div>

ngClass Using the Ternary Operator

The ternary operator allows us to use shorthand to specify two different classes, one if an expression is true and one for false. Here is the basic syntax for the ternary operator:

ng-class="$variableToEvaluate ? 'class-if-true' : 'class-if-false'">

Evaluating First, Last or Specific Number

If you are using the ngRepeat directive and you want to apply classes to the first, last, or a specific number in the list, you can use special properties of ngRepeat. These include $first, $last, $even, $odd, and a few others. Here's an example of how to use these.

<!-- add a class to the first item -->
<ul>
  <li ng-class="{ 'text-success': $first }" ng-repeat="item in items">{{ item.name }}</li>
</ul>

<!-- add a class to the last item -->
<ul>
  <li ng-class="{ 'text-danger': $last }" ng-repeat="item in items">{{ item.name }}</li>
</ul>

<!-- add a class to the even items and a different class to the odd items -->
<ul>
  <li ng-class="{ 'text-info': $even, 'text-danger': $odd }" ng-repeat="item in items">{{ item.name }}</li>
</ul>

In the current version of Web API, the usage of multiple complex objects (like your Content and Config complex objects) within the Web API method signature is not allowed. I'm betting good money that config (your second parameter) is always coming back as NULL. This is because only one complex object can be parsed from the body for one request. For performance reasons, the Web API request body is only allowed to be accessed and parsed once. So after the scan and parsing occurs of the request body for the "content" parameter, all subsequent body parses will end in "NULL". So basically:

• Only one item can be attributed with [FromBody].
• Any number of items can be attributed with [FromUri].

Below is a useful extract from Mike Stall's excellent blog article (oldie but goldie!). You'll want to pay attention to item 4:

Here are the basic rules to determine whether a parameter is read with model binding or a formatter:

1. If the parameter has no attribute on it, then the decision is made purely on the parameter's .NET type. "Simple types" use model binding. Complex types use the formatters. A "simple type" includes: primitives, TimeSpan, DateTime, Guid, Decimal, String, or something with a TypeConverter that converts from strings.
2. You can use a [FromBody] attribute to specify that a parameter should be from the body.
3. You can use a [ModelBinder] attribute on the parameter or the parameter's type to specify that a parameter should be model bound. This attribute also lets you configure the model binder. [FromUri] is a derived instance of [ModelBinder] that specifically configures a model binder to only look in the URI.
4. The body can only be read once. So if you have 2 complex types in the signature, at least one of them must have a [ModelBinder] attribute on it.

It was a key design goal for these rules to be static and predictable.

A key difference between MVC and Web API is that MVC buffers the content (e.g. request body). This means that MVC's parameter binding can repeatedly search through the body to look for pieces of the parameters. Whereas in Web API, the request body (an HttpContent) may be a read-only, infinite, non-buffered, non-rewindable stream.

You can read the rest of this incredibly useful article on your own so, to cut a long story short, what you're trying to do is not currently possible in that way (meaning, you have to get creative). What follows is not a solution, but a workaround and only one possibility; there are other ways.

Solution/Workaround

(Disclaimer: I've not used it myself, I'm just aware of the theory!)

One possible "solution" is to use the JObject object. This objects provides a concrete type specifically designed for working with JSON.

You simply need to adjust the signature to accept just one complex object from the body, the JObject, let's call it stuff. Then, you manually need to parse properties of the JSON object and use generics to hydrate the concrete types.

For example, below is a quick'n'dirty example to give you an idea:

public void StartProcessiong([FromBody]JObject stuff)
{
  // Extract your concrete objects from the json object.
  var content = stuff["content"].ToObject<Content>();
  var config = stuff["config"].ToObject<Config>();

  . . . // Now do your thing!
}

I did say there are other ways, for example you can simply wrap your two objects in a super-object of your own creation and pass that to your action method. Or you can simply eliminate the need for two complex parameters in the request body by supplying one of them in the URI. Or ... well, you get the point.

Let me just reiterate I've not tried any of this myself, although it should all work in theory.

Slightly better version of the unique2 suggestion is below:

insert overwrite table target_table
select * from 
(
select stack(
    3,                 # generating new table with 3 records
    'John', 80,        # record_1
    'Bill', 61         # record_2
    'Martha', 101      # record_3
    ) 
) s;

Which does not require the hack with using an already exiting table.

its even easier:

fileList.Where(item => filterList.Contains(item))

in case you want to filter not for an exact match but for a "contains" you can use this expression:

var t = fileList.Where(file => filterList.Any(folder => file.ToUpperInvariant().Contains(folder.ToUpperInvariant())));

This is what I did: see on Codepen

var somedate = 1473888180593;
var myStartDate;
//var myStartDate = somedate - durationInMuntes;

myStartDate = new Date(dateAfterSubtracted('minutes', 100));

alert("The event will start on " + myStartDate.toDateString() + " at " + myStartDate.toTimeString());

function dateAfterSubtracted(range, amount){
    var now = new Date();
    if(range === 'years'){
        return now.setDate(now.getYear() - amount);
    }
    if(range === 'months'){
        return now.setDate(now.getMonth() - amount);
    }
    if(range === 'days'){
        return now.setDate(now.getDate() - amount);
    }
    if(range === 'hours'){
        return now.setDate(now.getHours() - amount);
    }
    if(range === 'minutes'){
        return now.setDate(now.getMinutes() - amount);
    }
    else {
        return null;
    }
}

//const total_count = await User.find(query).countDocuments();
//const users = await User.find(query).skip(+offset).limit(+limit).sort({[sort]: order}).select('-password');
const result = await User.aggregate([
  {$match : query},
  {$sort: {[sort]:order}},
  {$project: {password: 0, avatarData: 0, tokens: 0}},
  {$facet:{
      users: [{ $skip: +offset }, { $limit: +limit}],
      totalCount: [
        {
          $count: 'count'
        }
      ]
    }}
  ]);
console.log(JSON.stringify(result));
console.log(result[0]);
return res.status(200).json({users: result[0].users, total_count: result[0].totalCount[0].count});

The FETCH_HEAD is a reference to the tip of the last fetch, whether that fetch was initiated directly using the fetch command or as part of a pull. The current value of FETCH_HEAD is stored in the .git folder in a file named, you guessed it, FETCH_HEAD.

So if I issue:

git fetch https://github.com/ryanmaxwell/Fragaria

FETCH_HEAD may contain

3cfda7cfdcf9fb78b44d991f8470df56723658d3        https://github.com/ryanmaxwell/Fragaria

If I have the remote repo configured as a remote tracking branch then I can follow my fetch with a merge of the tracking branch. If I don't I can merge the tip of the last fetch directly using FETCH_HEAD.

git merge FETCH_HEAD

You can flip both vertical and horizontal at the same time

    -moz-transform: scaleX(-1) scaleY(-1);
    -o-transform: scaleX(-1) scaleY(-1);
    -webkit-transform: scaleX(-1) scaleY(-1);
    transform: scaleX(-1) scaleY(-1);

And with the transition property you can get a cool flip

    -webkit-transition: transform .4s ease-out 0ms;
    -moz-transition: transform .4s ease-out 0ms;
    -o-transition: transform .4s ease-out 0ms;
    transition: transform .4s ease-out 0ms;
    transition-property: transform;
    transition-duration: .4s;
    transition-timing-function: ease-out;
    transition-delay: 0ms;

Actually it flips the whole element, not just the background-image

SNIPPET

function flip(){_x000D_
 var myDiv = document.getElementById('myDiv');_x000D_
 if (myDiv.className == 'myFlipedDiv'){_x000D_
  myDiv.className = '';_x000D_
 }else{_x000D_
  myDiv.className = 'myFlipedDiv';_x000D_
 }_x000D_
}

#myDiv{_x000D_
  display:inline-block;_x000D_
  width:200px;_x000D_
  height:20px;_x000D_
  padding:90px;_x000D_
  background-color:red;_x000D_
  text-align:center;_x000D_
  -webkit-transition:transform .4s ease-out 0ms;_x000D_
  -moz-transition:transform .4s ease-out 0ms;_x000D_
  -o-transition:transform .4s ease-out 0ms;_x000D_
  transition:transform .4s ease-out 0ms;_x000D_
  transition-property:transform;_x000D_
  transition-duration:.4s;_x000D_
  transition-timing-function:ease-out;_x000D_
  transition-delay:0ms;_x000D_
}_x000D_
.myFlipedDiv{_x000D_
  -moz-transform:scaleX(-1) scaleY(-1);_x000D_
  -o-transform:scaleX(-1) scaleY(-1);_x000D_
  -webkit-transform:scaleX(-1) scaleY(-1);_x000D_
  transform:scaleX(-1) scaleY(-1);_x000D_
}

<div id="myDiv">Some content here</div>_x000D_
_x000D_
<button onclick="flip()">Click to flip</button>

Here is a numpy version of Sieve of Eratosthenes having both good complexity (lower than sorting an array of length n) and vectorization. Compared to @unutbu times this just as fast as the packages with 46 microsecons to find all primes below a million.

import numpy as np 
def generate_primes(n):
    is_prime = np.ones(n+1,dtype=bool)
    is_prime[0:2] = False
    for i in range(int(n**0.5)+1):
        if is_prime[i]:
            is_prime[i**2::i]=False
    return np.where(is_prime)[0]

Timings:

import time    
for i in range(2,10):
    timer =time.time()
    generate_primes(10**i)
    print('n = 10^',i,' time =', round(time.time()-timer,6))

>> n = 10^ 2  time = 5.6e-05
>> n = 10^ 3  time = 6.4e-05
>> n = 10^ 4  time = 0.000114
>> n = 10^ 5  time = 0.000593
>> n = 10^ 6  time = 0.00467
>> n = 10^ 7  time = 0.177758
>> n = 10^ 8  time = 1.701312
>> n = 10^ 9  time = 19.322478

Even same issue I faced, in browser it was showing compiled code. I have made below changes in webpack config file and it is working fine now.

 devtool: '#inline-source-map',
 debug: true,

and in loaders I kept babel-loader as first option

loaders: [
  {
    loader: "babel-loader",
    include: [path.resolve(__dirname, "src")]
  },
  { test: /\.js$/, exclude: [/app\/lib/, /node_modules/], loader: 'ng-annotate!babel' },
  { test: /\.html$/, loader: 'raw' },
  {
    test: /\.(jpe?g|png|gif|svg)$/i,
    loaders: [
      'file?hash=sha512&digest=hex&name=[hash].[ext]',
      'image-webpack?bypassOnDebug&optimizationLevel=7&interlaced=false'
    ]
  },
  {test: /\.less$/, loader: "style!css!less"},
  { test: /\.styl$/, loader: 'style!css!stylus' },
  { test: /\.css$/, loader: 'style!css' }
]

'Caret' package provides methods for preprocessing data (e.g. centering and scaling). You could also use the following code:

library(caret)
# Assuming goal class is column 10
preObj <- preProcess(data[, -10], method=c("center", "scale"))
newData <- predict(preObj, data[, -10])

More details: http://www.inside-r.org/node/86978

max-width is the width of the target display area, e.g. the browser; max-device-width is the width of the device's entire rendering area, i.e. the actual device screen.

• If you are using the max-device-width, when you change the size of the browser window on your desktop, the CSS style won't change to different media query setting;

• If you are using the max-width, when you change the size of the browser on your desktop, the CSS will change to different media query setting and you might be shown with the styling for mobiles, such as touch-friendly menus.

I had the same error.

My filename was jpaContext.xml and it was placed in src/main/resources. I specified param value="classpath:/jpaContext.xml".

Finally I renamed the file to applicationContext.xml and moved it to the WEB-INF directory and changed param value to /WEB-INF/applicationContext.xml, then it worked!

Is there a way to convert an Integer[] array to an int[] array?

This gross omission from the Java core libraries seems to come up on pretty much every project I ever work on. And as convenient as the Trove library might be, I am unable to parse the precise requirements to meet LPGL for an Android app that statically links an LGPL library (preamble says ok, body does not seem to say the same). And it's just plain inconvenient to go rip-and-stripping Apache sources to get these classes. There has to be a better way.

If I understand correctly then it would be easier if you gave your image a transparent background and set the background container's background-color property without having to use filters and so on.

http://www.ajaxblender.com/howto-convert-image-to-grayscale-using-javascript.html

Shows you how to use filters in IE. Maybe if you leverage something from that. Not very cross-browser compatible though. Another option might be to have two images and use them as background-images (rather than img tags), swap one out after another using the :hover pseudo selector.

I modified Nico's code to work for my needs.

$.fn.textWidth = function(){
    var self = $(this),
        children = self.contents(),
        calculator = $('<span style="white-space:nowrap;" />'),
        width;

    children.wrap(calculator);
    width = children.parent().width(); // parent = the calculator wrapper
    children.unwrap();
    return width;
};

I'm using .contents() as .children() does not return text nodes which I needed. I also found that the returned width was impacted by the viewport width which was causing wrapping so I'm using white-space:nowrap; to get the correct width regardless of viewport width.

Anyone facing this while using cmake build, the solution is to make sure you have included the four supported platforms in your app module's android{} block:

 externalNativeBuild {
            cmake {
                cppFlags "-std=c++14"
                abiFilters "arm64-v8a", "x86", "armeabi-v7a", "x86_64"
            }
        }

Whenever you want to convert a String to Date object then use SimpleDateFormat#parse
Try to use

String dateInString = new java.text.SimpleDateFormat("EEEE, dd/MM/yyyy/hh:mm:ss")
        .format(cal.getTime())
SimpleDateFormat formatter = new SimpleDateFormat("EEEE, dd/MM/yyyy/hh:mm:ss");
Date parsedDate = formatter.parse(dateInString);

.Additional thing is if you want to convert a Date to String then you should use SimpleDateFormat#format function.
Now the Point for you is new Date(String) is deprecated and not recommended now.Now whenever anyone wants to parse , then he/she should use SimpleDateFormat#parse.

refer the official doc for more Date and Time Patterns used in SimpleDateFormat options.