I am behind my organization's proxy, running the following commands fixed the issue for me

npm config set proxy http://proxy.yourproxydomain.com:port
npm config set https-proxy http://proxy.yourproxydomain.com:port
npm config set strict-ssl false
npm config set registry https://registry.npmjs.org/

I had got this error, Linux system(Ubuntu) and This might happen when you run :

npm install

1) If the project is not present in your localdisk/computer, copy it to your computer and try again. So you get the permission to access folder (Just make sure you have access permission).

2) If you still get some warnings or errors, run:

npm audit fix

This will solve vulnerabilities in your dependencies and can help you fix a vulnerability by providing simple-to-run npm commands and recommendations for further troubleshooting.

Hope it helps!

Both attributes have been added to Bootstrap CDN to implement Subresource Integrity.

Subresource Integrity defines a mechanism by which user agents may verify that a fetched resource has been delivered without unexpected manipulation Reference

Integrity attribute is to allow the browser to check the file source to ensure that the code is never loaded if the source has been manipulated.

Crossorigin attribute is present when a request is loaded using 'CORS' which is now a requirement of SRI checking when not loaded from the 'same-origin'. More info on crossorigin

More detail on Bootstrap CDNs implementation

Based on the other answers to this question, I've implemented a new approach using bcrypt.

Why use bcrypt

If I understand correctly, the argument to use bcrypt over SHA512 is that bcrypt is designed to be slow. bcrypt also has an option to adjust how slow you want it to be when generating the hashed password for the first time:

# The '12' is the number that dictates the 'slowness'
bcrypt.hashpw(password, bcrypt.gensalt( 12 ))

Slow is desirable because if a malicious party gets their hands on the table containing hashed passwords, then it is much more difficult to brute force them.

Implementation

def get_hashed_password(plain_text_password):
    # Hash a password for the first time
    #   (Using bcrypt, the salt is saved into the hash itself)
    return bcrypt.hashpw(plain_text_password, bcrypt.gensalt())

def check_password(plain_text_password, hashed_password):
    # Check hashed password. Using bcrypt, the salt is saved into the hash itself
    return bcrypt.checkpw(plain_text_password, hashed_password)

Notes

I was able to install the library pretty easily in a linux system using:

pip install py-bcrypt

However, I had more trouble installing it on my windows systems. It appears to need a patch. See this Stack Overflow question: py-bcrypt installing on win 7 64bit python

I would recommend Ulrich Drepper's SHA-256/SHA-512 based crypt implementation.

We ported these algorithms to Java, and you can find a freely licensed version of them at ftp://ftp.arlut.utexas.edu/java_hashes/.

Note that most modern (L)Unices support Drepper's algorithm in their /etc/shadow files.

There 3 functions you want to look at here:

• LARGE - Returns the k-th largest value in a data set.
• INDEX - Returns a value or the reference to a value from within a table or range.
• MATCH - The MATCH function searches for a specified item in a range of cells, and then returns the relative position of that item in the range.

I ran a sample in Excel with your OPS values in Column B and Players in Column C, see below:

• In Cells A13 to A17, the values 1 to 5 were inserted to specify the nth highest value.
• In Cell B13, the following formula was added: =LARGE($B$2:$B$11, A13)
• In Cell C13, the following formula was added: =INDEX($C$2:$C$11,MATCH(B13,$B$2:$B$11,0))
• These formulae get the highest ranking OPS and Player based on the value in A13.
• Simply select and drag to copy these formulae down to the next 4 cells which will reference the corresponding ranking in Column A.

It helps not to focus on the strong or weak part of the discussion. Instead focus on the cycle part.

A retain cycle is a loop that happens when Object A retains Object B, and Object B retains Object A. In that situation, if either object is released:

• Object A won't be deallocated because Object B holds a reference to it.
• But Object B won't ever be deallocated as long as Object A has a reference to it.
• But Object A will never be deallocated because Object B holds a reference to it.
• ad infinitum

Thus, those two objects will just hang around in memory for the life of the program even though they should, if everything were working properly, be deallocated.

So, what we're worried about is retain cycles, and there's nothing about blocks in and of themselves that create these cycles. This isn't a problem, for example:

[myArray enumerateObjectsUsingBlock:^(id obj, NSUInteger idx, BOOL *stop){
   [self doSomethingWithObject:obj];
}];

The block retains self, but self doesn't retain the block. If one or the other is released, no cycle is created and everything gets deallocated as it should.

Where you get into trouble is something like:

//In the interface:
@property (strong) void(^myBlock)(id obj, NSUInteger idx, BOOL *stop);

//In the implementation:
[self setMyBlock:^(id obj, NSUInteger idx, BOOL *stop) {
  [self doSomethingWithObj:obj];     
}];

Now, your object (self) has an explicit strong reference to the block. And the block has an implicit strong reference to self. That's a cycle, and now neither object will be deallocated properly.

Because, in a situation like this, self by definition already has a strong reference to the block, it's usually easiest to resolve by making an explicitly weak reference to self for the block to use:

__weak MyObject *weakSelf = self;
[self setMyBlock:^(id obj, NSUInteger idx, BOOL *stop) {
  [weakSelf doSomethingWithObj:obj];     
}];

But this should not be the default pattern you follow when dealing with blocks that call self! This should only be used to break what would otherwise be a retain cycle between self and the block. If you were to adopt this pattern everywhere, you'd run the risk of passing a block to something that got executed after self was deallocated.

//SUSPICIOUS EXAMPLE:
__weak MyObject *weakSelf = self;
[[SomeOtherObject alloc] initWithCompletion:^{
  //By the time this gets called, "weakSelf" might be nil because it's not retained!
  [weakSelf doSomething];
}];

This very helpful feature is now available starting at version 1.1.2 of AngularJS. It's considered unstable but I have used it (1.1.3) and it works fine.

Basically you can use a function to generate a templateUrl string. The function is passed the route parameters that you can use to build and return the templateUrl string.

var app = angular.module('app',[]);

app.config(
    function($routeProvider) {
        $routeProvider.
            when('/', {templateUrl:'/home'}).
            when('/users/:user_id', 
                {   
                    controller:UserView, 
                    templateUrl: function(params){ return '/users/view/' + params.user_id; }
                }
            ).
            otherwise({redirectTo:'/'});
    }
);

Many thanks to https://github.com/lrlopez for the pull request.

https://github.com/angular/angular.js/pull/1524

Here is how I solved my problem:

Directive

app.directive("directive_name", function(){
    return {
        restrict: 'E',
        transclude: true,
        template: function(elem, attr){
           return '<div><h2>{{'+attr.scope+'}}</h2></div>';
        },
        replace: true
    };
})

Controller

$scope.building = function(data){
    var chart = angular.element(document.createElement('directive_name'));
    chart.attr('scope', data);
    $compile(chart)($scope);
    angular.element(document.getElementById('wrapper')).append(chart);
  }

I now can use different scopes through the same directive and append them dynamically.

To remove the last line from a file without reading the whole file or rewriting anything, you can use

tail -n 1 "$file" | wc -c | xargs -I {} truncate "$file" -s -{}

To remove the last line and also print it on stdout ("pop" it), you can combine that command with tee:

tail -n 1 "$file" | tee >(wc -c | xargs -I {} truncate "$file" -s -{})

These commands can efficiently process a very large file. This is similar to, and inspired by, Yossi's answer, but it avoids using a few extra functions.

If you're going to use these repeatedly and want error handling and some other features, you can use the poptail command here: https://github.com/donm/evenmoreutils

execl("/home/vlc", 
  "/home/vlc", "/home/my movies/the movie i want to see.mkv", 
  (char*) NULL);

You need to specify all arguments, included argv[0] which isn't taken from the executable.

Also make sure the final NULL gets cast to char*.

Details are here: http://pubs.opengroup.org/onlinepubs/9699919799/functions/exec.html

What about running tmux/GNU Screen within the container? Seems the smoother way to access as many vty as you want with a simple:

$ docker attach {container id}

Try this:

function addClass(element, value) {
  if(!element.className) {
    element.className = value;
  } else {
    newClassName = element.className;
    newClassName+= " ";
    newClassName+= value;
    element.className = newClassName;
  }
}

Similar logic could be used to make a removeClass function.

The Guava library contains convenience methods for creating lists and other collections which makes this much prettier than using the standard library classes.

Example:

ArrayList<String> list = newArrayList("a", "b", "c");

(This assumes import static com.google.common.collect.Lists.newArrayList;)

I had a similar problem. I wanted to find a string in one column and put that value in another column in the same table. The select statement below finds the text inside the parens.

When I created the query in Access I selected all fields. On the SQL view for that query, I replaced the mytable.myfield for the field I wanted to have the value from inside the parens with

SELECT Left(Right(OtherField,Len(OtherField)-InStr((OtherField),"(")), 
            Len(Right(OtherField,Len(OtherField)-InStr((OtherField),"(")))-1) 

I ran a make table query. The make table query has all the fields with the above substitution and ends with INTO NameofNewTable FROM mytable

What finally worked for me is what I found here:

http://www.codeproject.com/Tips/395286/How-to-Access-WAMP-Server-in-LAN-or-WAN

To summarize:

• set Listen in httpd.conf:

  Listen 192.168.1.154:8081

• Add Allow from all to this section:

  <Directory "cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory>

• Set an inbound port rule. I think the was the crucial missing part for me:

Great! The next step is to open port (8081) of the server such that everyone can access your server. This depends on which OS you are using. Like if you are using Windows Vista, then follow the below steps.

Open Control Panel >> System and Security >> Windows Firewall then click on “Advance Setting” and then select “Inbound Rules” from the left panel and then click on “Add Rule…”. Select “PORT” as an option from the list and then in the next screen select “TCP” protocol and enter port number “8081” under “Specific local port” then click on the ”Next” button and select “Allow the Connection” and then give the general name and description to this port and click Done.

Now you are done with PORT opening as well.

Next is “Restart All Services” of WAMP and access your machine in LAN or WAN.

There is a C# Google Voice API... there is limited documentation, however the download has an application that 'works' using the API that is included:

https://sourceforge.net/projects/gvoicedotnet/

Here comes a solution with XSLT:

<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="//element3">
    <xsl:value-of select="element4/text()" />.<xsl:value-of select="element5/text()" />
</xsl:template>
</xsl:stylesheet>

By default Mocha will read a file named test/mocha.opts that can contain command line arguments. So you could create such a file that contains:

--timeout 5000

Whenever you run Mocha at the command line, it will read this file and set a timeout of 5 seconds by default.

Another way which may be better depending on your situation is to set it like this in a top level describe call in your test file:

describe("something", function () {
    this.timeout(5000); 

    // tests...
});

This would allow you to set a timeout only on a per-file basis.

You could use both methods if you want a global default of 5000 but set something different for some files.

Note that you cannot generally use an arrow function if you are going to call this.timeout (or access any other member of this that Mocha sets for you). For instance, this will usually not work:

describe("something", () => {
    this.timeout(5000); //will not work

    // tests...
});

This is because an arrow function takes this from the scope the function appears in. Mocha will call the function with a good value for this but that value is not passed inside the arrow function. The documentation for Mocha says on this topic:

Passing arrow functions (“lambdas”) to Mocha is discouraged. Due to the lexical binding of this, such functions are unable to access the Mocha context.

Another possibility is too many threads. We just ran into this error message when running a test harness against an app that uses a thread pool. We used

watch -n 5 -d "ps -eL <java_pid> | wc -l"

to watch the ongoing count of Linux native threads running within the given Java process ID. After this hit about 1,000 (for us--YMMV), we started getting the error message you mention.

Can do this in jQuery. Try all options .height(), .innerHeight() or .outerHeight().

$('document').ready(function() {
    $('#right_div').css({'height': $('#left_div').innerHeight()});
});

Example Screenshot

Hope this helps. Thanks!!

Try using plt.tight_layout

As a quick example:

import matplotlib.pyplot as plt

fig, axes = plt.subplots(nrows=4, ncols=4)
fig.tight_layout() # Or equivalently,  "plt.tight_layout()"

plt.show()

Without Tight Layout

With Tight Layout

for just minutes and seconds use this

String.format("%02d:%02d", (seconds / 3600 * 60 + ((seconds % 3600) / 60)), (seconds % 60))

Typing 'my IP' in google search I got my public IP address and pasted it in IP address (the third option). It works for me.

You have a class on your CSS that is overwriting your width and height, the class reads as such:

.postItem img {
    height: auto;
    width: 450px;
}

Remove that and your width/height properties on the img tag should work.

Taking some inspiration from Daren Thomas's answer (and edit), try this:

proc = subprocess.Popen('dir C:\\', shell=True, stdin=subprocess.PIPE, stdout=subprocess.PIPE)
out, err = proc.communicate()

out will now contain the text output.

They key nugget here is that the subprocess module already provides you shell integration with shell=True, so you don't need to call cmd.exe directly.

As a reminder, if you're in Python 3, this is going to be bytes, so you may want to do out.decode() to convert to a string.

Logging API - The Java Logging API facilitates software servicing and maintenance at customer sites by producing log reports suitable for analysis by end users, system administrators, field service engineers, and software development teams. The Logging APIs capture information such as security failures, configuration errors, performance bottlenecks, and/or bugs in the application or platform. The core package includes support for delivering plain text or XML formatted log records to memory, output streams, consoles, files, and sockets. In addition, the logging APIs are capable of interacting with logging services that already exist on the host operating system.

Package ^{java.util.logging} « Provides the classes and interfaces of the Java platform's core logging facilities.

Log4j 1.x « log4j is a popular Java-based logging utility. Log4j is an open source project based on the work of many authors. It allows the developer to control which log statements are output to a variety of locations by using Appenders [console, files, DB and email]. It is fully configurable at runtime using external configuration files.

Log4j has three main components:

• Loggers - [OFF, FATAL, ERROR, WARN, INFO, DEBUG, TRACE]

• Appenders

  • Apache Commons Logging: ConsoleAppender, FileAppender, RollingFileAppender, DailyRollingFileAppender, JDBCAppender-Driver, SocketAppender

  • Log4J Appender for MongoDB: MongoDbAppender - Driver

• Layouts - [PatternLayout, EnhancedPatternLayout]

Configuration files can be written in XML or in Java properties (key=value) format.

1. log4j_External.properties « Java properties (key=value) format

The string between an opening "${" and closing "}" is interpreted as a key. The value of the substituted variable can be defined as a system property or in the configuration file itself. Set appender specific options. « log4j.appender.appenderName.option=value, For each named appender you can configure its Layout.

log4j.rootLogger=INFO, FILE, FILE_PER_SIZE, FILE_PER_DAY, CONSOLE, MySql

#log.path=./
log.path=E:/Logs

# https://logging.apache.org/log4j/1.2/apidocs/org/apache/log4j/PatternLayout.html
# {%-5p - [WARN ,INFO ,ERROR], %5p 0- [ WARN, INFO,ERROR]}
log.patternLayout=org.apache.log4j.PatternLayout
log.pattern=%-5p - %d{yyyy-MM-dd HH:mm:ss.SSS} %C{1}:%12.20M:%L - %m %n

# System.out | System.err
log4j.appender.CONSOLE=org.apache.log4j.ConsoleAppender
log4j.appender.CONSOLE.Target=System.err
log4j.appender.CONSOLE.layout=${log.patternLayout}
log4j.appender.CONSOLE.layout.ConversionPattern=${log.pattern}

# File Appender
log4j.appender.FILE=org.apache.log4j.FileAppender
log4j.appender.FILE.File=${log.path}/logFile.log
#log4j:ERROR setFile(null,false) call failed. - Defaults setFile(null,true)
#log4j.appender.FILE.Append = false
log4j.appender.FILE.layout=${log.patternLayout}
log4j.appender.FILE.layout.ConversionPattern=${log.pattern}

# BackUP files for every Day.
log4j.appender.FILE_PER_DAY=org.apache.log4j.DailyRollingFileAppender
# [[ Current File ] - logRollingDayFile.log ], { [BackUPs] logRollingDayFile.log_2017-12-10, ... }
log4j.appender.FILE_PER_DAY.File=${log.path}/logRollingDayFile.log
log4j.appender.FILE_PER_DAY.DatePattern='_'yyyy-MM-dd
log4j.appender.FILE_PER_DAY.layout=${log.patternLayout}
log4j.appender.FILE_PER_DAY.layout.ConversionPattern=${log.pattern}

# BackUP files for size rotation with log cleanup.
log4j.appender.FILE_PER_SIZE=org.apache.log4j.RollingFileAppender
# [[ Current File ] - logRollingFile.log ], { [BackUPs] logRollingFile.log.1, logRollingFile.log.2}
log4j.appender.FILE_PER_SIZE.File=${log.path}/logRollingFile.log
log4j.appender.FILE_PER_SIZE.MaxFileSize=100KB
log4j.appender.FILE_PER_SIZE.MaxBackupIndex=2
log4j.appender.FILE_PER_SIZE.layout=${log.patternLayout}
log4j.appender.FILE_PER_SIZE.layout.ConversionPattern=${log.pattern}

# MySql Database - JDBCAppender
log4j.appender.MySql=org.apache.log4j.jdbc.JDBCAppender
log4j.appender.MySql.driver=com.mysql.jdbc.Driver
log4j.appender.MySql.URL=jdbc:mysql://localhost:3306/automationlab
log4j.appender.MySql.user=root
log4j.appender.MySql.password=
log4j.appender.MySql.layout=org.apache.log4j.EnhancedPatternLayout
log4j.appender.MySql.layout.ConversionPattern=INSERT INTO `logdata` VALUES ('%p', '%d{yyyy-MM-dd HH:mm:ss}', '%C', '%M', '%L', '%m');
#log4j.appender.MySql.sql=INSERT INTO `logdata` VALUES ('%p', '%d{yyyy-MM-dd HH:mm:ss}', '%C', '%M', '%L', '%m');

# Direct log events[Messages] to MongoDB Collection - MongoDbAppender
log.mongoDB.hostname=loalhost
log.mongoDB.userName=Yash777
log.mongoDB.password=Yash@123
log.mongoDB.DB=MyLogDB
log.mongoDB.Collection=Logs

log4j.appender.MongoDB=org.log4mongo.MongoDbAppender
log4j.appender.MongoDB.hostname=${log.mongoDB.hostname}
log4j.appender.MongoDB.userName=${log.mongoDB.userName}
log4j.appender.MongoDB.password=${log.mongoDB.password}
log4j.appender.MongoDB.port=27017
log4j.appender.MongoDB.databaseName=${log.mongoDB.DB}
log4j.appender.MongoDB.collectionName=${log.mongoDB.Collection}
log4j.appender.MongoDB.writeConcern=FSYNCED

MySQL Table structure for table logdata

CREATE TABLE IF NOT EXISTS `logdata` (
  `Logger_Level` varchar(5) COLLATE utf8_unicode_ci NOT NULL,
  `DataTime` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
  `ClassName` varchar(30) COLLATE utf8_unicode_ci NOT NULL,
  `MethodName` varchar(50) COLLATE utf8_unicode_ci NOT NULL,
  `LineNumber` int(10) NOT NULL,
  `Message` text COLLATE utf8_unicode_ci NOT NULL
) ENGINE=InnoDB DEFAULT CHARSET=utf8 COLLATE=utf8_unicode_ci;

2. log4j_External.xml « XML log4j:configuration with public DTD file

<?xml version="1.0" encoding="iso-8859-1"?>
<!DOCTYPE log4j:configuration PUBLIC
  "-//APACHE//DTD LOG4J 1.2//EN" "http://logging.apache.org/log4j/1.2/apidocs/org/apache/log4j/xml/doc-files/log4j.dtd">
<log4j:configuration debug="false">

    <appender name="CONSOLE" class="org.apache.log4j.ConsoleAppender">
        <param name="target" value="System.out" />
        <param name="threshold" value="debug" />
        <layout class="org.apache.log4j.PatternLayout">
            <param name="ConversionPattern" value="%-5p - %d{yyyy-MM-dd HH:mm:ss.SSS} %C{1}:%12.20M:%L - %m %n" />
        </layout>
    </appender>

    <appender name="FILE" class="org.apache.log4j.FileAppender">
        <param name="file" value="E:/Logs/logFile.log" />
        <param name="append" value="false" />
        <layout class="org.apache.log4j.PatternLayout">
            <param name="ConversionPattern" value="%-5p - %d{yyyy-MM-dd HH:mm:ss.SSS} %C{1}:%12.20M:%L - %m %n" />
        </layout>
    </appender>

    <appender name="FILE_PER_SIZE" class="org.apache.log4j.RollingFileAppender">
        <param name="file" value="E:/Logs/logRollingFile.log" />
        <param name="immediateFlush" value="true"/>
        <param name="maxFileSize" value="100KB" />
        <param name="maxBackupIndex" value="2"/>
        <layout class="org.apache.log4j.PatternLayout">
            <param name="ConversionPattern" value="%-5p - %d{yyyy-MM-dd HH:mm:ss.SSS} %C{1}:%12.20M:%L - %m %n" />
        </layout>
    </appender>

    <appender name="FILE_PER_DAY" class="org.apache.log4j.DailyRollingFileAppender">
        <param name="file" value="E:/Logs/logRollingDayFile.log" />
        <param name="datePattern" value="'_'yyyy-MM-dd" />
        <layout class="org.apache.log4j.PatternLayout">
            <param name="ConversionPattern" value="%-5p - %d{yyyy-MM-dd HH:mm:ss.SSS} %C{1}:%12.20M:%L - %m %n"/>
        </layout>
    </appender>

    <root>
        <priority value="info" />
        <appender-ref ref="CONSOLE" />
        <appender-ref ref="FILE" />
        <appender-ref ref="FILE_PER_SIZE" />
        <appender-ref ref="FILE_PER_DAY" />
    </root>
</log4j:configuration>

3. Log4j Configuration from the URL in Java program:

In order to specify a custom configuration with an external file, the used class must implement the Configurator interface.

when default configuration files "log4j.properties", "log4j.xml" are not available

• For "log4j.properties" you can fed to the PropertyConfigurator.configure(java.net.URL) method.
• For "log4j.xml" DOMConfigurator will be used.

public class LogFiles {
    // Define a static logger variable so that it references the Logger instance named "LogFiles".
    static final Logger log = Logger.getLogger( LogFiles.class );

    @SuppressWarnings("deprecation")
    public static void main(String[] args) {
        System.out.println("CONFIGURATION_FILE « "+LogManager.DEFAULT_CONFIGURATION_FILE);
        System.out.println("DEFAULT_XML_CONFIGURATION_FILE = 'log4j.xml' « Default access modifier");

        String fileName = //"";
                //"log4j_External.xml";
                "log4j_External.properties";
        String configurationFile = System.getProperty("user.dir")+"/src/" + fileName;

        if( fileName.contains(".xml") ) {
            DOMConfigurator.configure( configurationFile );
            log.info("Extension *.xml");
        } else if ( fileName.contains(".properties") ) {
            PropertyConfigurator.configure( configurationFile );
            log.info("Extension *.properties");
        } else {
            DailyRollingFileAppender dailyRollingAppender = new DailyRollingFileAppender();
            dailyRollingAppender.setFile("E:/Logs/logRollingDayFile.log");
            dailyRollingAppender.setDatePattern("'_'yyyy-MM-dd");

            PatternLayout layout = new PatternLayout();
            layout.setConversionPattern( "%-5p - %d{yyyy-MM-dd HH:mm:ss.SSS} %C{1}:%12.20M:%L - %m %n" );
            dailyRollingAppender.setLayout(layout);

            dailyRollingAppender.activateOptions();

            Logger rootLogger = Logger.getRootLogger();
            rootLogger.setLevel(Level.DEBUG);
            rootLogger.addAppender(dailyRollingAppender);

            log.info("Configuring from Java Class.");
        }

        log.info("Console.Message.");
        method2();
        methodException(0);
    }

    static void method2() {
        log.info("method2 - Console.Message.");
    }
    static void methodException(int b) {
        try {
            int a = 10/b;
            System.out.println("Result : "+ a);
            log.info("Result : "+ a);
        } catch (Exception ex) { // ArithmeticException: / by zero
            log.error(String.format("\n\tException occurred: %s", stackTraceToString(ex)));
        }
    }
    public static String stackTraceToString(Exception ex) {
        StringWriter sw = new StringWriter();
        PrintWriter pw = new PrintWriter(sw);
        ex.printStackTrace(pw);
        return sw.toString();
    }
}

As others have referred, names in Oracle SQL must be less or equal to 30 characters. I would add that this rule applies not only to table names but to field names as well. So there you have it.

Well for me the issue was even more annoying, I was using a service within a service and forgot to add it as dependency in the appModule! Hope this helps someone save several hours breaking the app down only to build it back up again

If you're not in an ipython notebook (like the OP), you can also just declare the size when you declare the figure:

width = 12
height = 12
plt.figure(figsize=(width, height))

For getting all the info about the cordova package use this command:

npm info cordova

You must "build" before "run", otherwise "Binary not found". You can set up "Auto build", so that it will build and run. Check this post to set up "Auto build" http://situee.blogspot.com/2012/08/how-to-set-eclipse-cdt-auto-build.html

If you are using Java code based on Spring MVC configuration then enable the DefaultServletHandlerConfigurer in the WebMvcConfigurerAdapter object.

@Override
public void configureDefaultServletHandling(DefaultServletHandlerConfigurer configurer) { 
        configurer.enable();
}

I had the same error. It happened because I called a method that was constructed as public async void ... instead of public async Task ....

Open the file in Notepad. Click 'Save As...'. In the 'Encoding:' combo box you will see the current file format.

Alongside nmaier's answer, as he said you'll always receive code 1006. However, if you were to somehow theoretically receive other codes, here is code to display the results (via RFC6455).

you will almost never get these codes in practice so this code is pretty much pointless

var websocket;
if ("WebSocket" in window)
{
    websocket = new WebSocket("ws://yourDomainNameHere.org/");

    websocket.onopen = function (event) {
        $("#thingsThatHappened").html($("#thingsThatHappened").html() + "<br />" + "The connection was opened");
    };
    websocket.onclose = function (event) {
        var reason;
        alert(event.code);
        // See http://tools.ietf.org/html/rfc6455#section-7.4.1
        if (event.code == 1000)
            reason = "Normal closure, meaning that the purpose for which the connection was established has been fulfilled.";
        else if(event.code == 1001)
            reason = "An endpoint is \"going away\", such as a server going down or a browser having navigated away from a page.";
        else if(event.code == 1002)
            reason = "An endpoint is terminating the connection due to a protocol error";
        else if(event.code == 1003)
            reason = "An endpoint is terminating the connection because it has received a type of data it cannot accept (e.g., an endpoint that understands only text data MAY send this if it receives a binary message).";
        else if(event.code == 1004)
            reason = "Reserved. The specific meaning might be defined in the future.";
        else if(event.code == 1005)
            reason = "No status code was actually present.";
        else if(event.code == 1006)
           reason = "The connection was closed abnormally, e.g., without sending or receiving a Close control frame";
        else if(event.code == 1007)
            reason = "An endpoint is terminating the connection because it has received data within a message that was not consistent with the type of the message (e.g., non-UTF-8 [http://tools.ietf.org/html/rfc3629] data within a text message).";
        else if(event.code == 1008)
            reason = "An endpoint is terminating the connection because it has received a message that \"violates its policy\". This reason is given either if there is no other sutible reason, or if there is a need to hide specific details about the policy.";
        else if(event.code == 1009)
           reason = "An endpoint is terminating the connection because it has received a message that is too big for it to process.";
        else if(event.code == 1010) // Note that this status code is not used by the server, because it can fail the WebSocket handshake instead.
            reason = "An endpoint (client) is terminating the connection because it has expected the server to negotiate one or more extension, but the server didn't return them in the response message of the WebSocket handshake. <br /> Specifically, the extensions that are needed are: " + event.reason;
        else if(event.code == 1011)
            reason = "A server is terminating the connection because it encountered an unexpected condition that prevented it from fulfilling the request.";
        else if(event.code == 1015)
            reason = "The connection was closed due to a failure to perform a TLS handshake (e.g., the server certificate can't be verified).";
        else
            reason = "Unknown reason";

        $("#thingsThatHappened").html($("#thingsThatHappened").html() + "<br />" + "The connection was closed for reason: " + reason);
    };
    websocket.onmessage = function (event) {
        $("#thingsThatHappened").html($("#thingsThatHappened").html() + "<br />" + "New message arrived: " + event.data);
    };
    websocket.onerror = function (event) {
        $("#thingsThatHappened").html($("#thingsThatHappened").html() + "<br />" + "There was an error with your websocket.");
    };
}
else
{
    alert("Websocket is not supported by your browser");
    return;
}

websocket.send("Yo wazzup");

websocket.close();

See http://jsfiddle.net/gr0bhrqr/

GlazedLists has a very, very good sorted list implementation

You can try FileUtils from org.apache.commons.io.FileUtils, try downloading jar from here

and you can use the following method: FileUtils.readFileToString("yourFileName");

Hope it helps you..

Swift 5 & Xcode 10.2:

NotificationCenter.default.addObserver(
            self,
            selector: #selector(batteryLevelDidChangeNotification),
            name: UIDevice.batteryLevelDidChangeNotification,
            object: nil)

I had a similar problem with Ant build (started by hand from IDEA GUI). In my case there was the right solution to right click on the Ant task, choose properties and set a higher value to "Maximum heap space (Mb):" and "Maximum stack space (Mb):" input fields.

I figured it out. Need to use echo in PHP instead of return.

<?php 
  $output = some_function();
  echo $output;
?> 

And the jQ:

success: function(data) {
  doSomething(data);
}

In your Dockerfile, run this first:

apt-get update && apt-get install -y gnupg2

My guess is that RAND_MAX is equal to INT_MAX and so you're overflowing it to a negative.

Just do this:

r = ((double) rand() / (RAND_MAX)) + 1;

Or even better, use C++11's random number generators.

I created an UIView extension which allows to round specific corners :

import UIKit

enum RoundType {
    case top
    case none
    case bottom
    case both
}

extension UIView {

    func round(with type: RoundType, radius: CGFloat = 3.0) {
        var corners: UIRectCorner

        switch type {
        case .top:
            corners = [.topLeft, .topRight]
        case .none:
            corners = []
        case .bottom:
            corners = [.bottomLeft, .bottomRight]
        case .both:
            corners = [.allCorners]
        }

        DispatchQueue.main.async {
            let path = UIBezierPath(roundedRect: self.bounds, byRoundingCorners: corners, cornerRadii: CGSize(width: radius, height: radius))
            let mask = CAShapeLayer()
            mask.path = path.cgPath
            self.layer.mask = mask
        }
    }

}

Now, back to your questions:

Q1. Does this sequence generator make use of the database's increasing numeric value generating capability or generates the number on its own?

By using the GenerationType.SEQUENCE strategy on the @GeneratedValue annotation, the JPA provider will try to use a database sequence object of the underlying database that supports this feature (e.g., Oracle, SQL Server, PostgreSQL, MariaDB).

If you are using MySQL, which doesn't support database sequence objects, then Hibernate is going to fall back to using the GenerationType.TABLE instead, which is undesirable since the TABLE generation performs badly.

So, don't use the GenerationType.SEQUENCE strategy with MySQL.

Q2. If JPA uses a database auto-increment feature, then will it work with datastores that don't have auto-increment feature?

I assume you are talking about the GenerationType.IDENTITY when you say database auto-increment feature.

To use an AUTO_INCREMENT or IDENTITY column, you need to use the GenerationType.IDENTITYstrategy on the @GeneratedValue annotation.

Q3. If JPA generates numeric value on its own, then how does the JPA implementation know which value to generate next? Does it consult with the database first to see what value was stored last in order to generate the value (last + 1)?

The only time when the JPA provider generates values on its own is when you are using the sequence-based optimizers, like:

• hi/lo
• pooled or pooled-lo

These optimizers are meat to reduce the number of database sequence calls, so they multiply the number of identifier values that can be generated using a single database sequence call.

To avoid conflicts between Hibernate identifier optimizers and other 3rd-party clients, you should use pooled or pooled-lo instead of hi/lo. Even if you are using a legacy application that was designed to use hi/lo, you can migrate to the pooled or pooled-lo optimizers.

Q4. Please also shed some light on sequenceName and allocationSize properties of @SequenceGenerator annotation.

The sequenceName attribute defines the database sequence object to be used to generate the identifier values. IT's the object you created using the CREATE SEQUENCE DDL statement.

So, if you provide this mapping:

@Id
@GeneratedValue(
    strategy = GenerationType.SEQUENCE,
    generator = "seq_post"
)
@SequenceGenerator(
    name = "seq_post"
)
private Long id;

Hibernate is going to use the seq_post database object to generate the identifier values:

SELECT nextval('hibernate_sequence')

The allocationSize defines the identifier value multiplier, and if you provide a value that's greater than 1, then Hibernate is going to use the pooled optimizer, to reduce the number of database sequence calls.

So, if you provide this mapping:

@Id
@GeneratedValue(
    strategy = GenerationType.SEQUENCE,
    generator = "seq_post"
)
@SequenceGenerator(
    name = "seq_post",
    allocationSize = 5
)
private Long id;

Then, when you persist 5 entities:

for (int i = 1; i <= 5; i++) {
    entityManager.persist(
        new Post().setTitle(
            String.format(
                "High-Performance Java Persistence, Part %d",
                i
            )
        )
    );
}

Only 2 database sequence calls will be executed, instead of 5:

SELECT nextval('hibernate_sequence')
SELECT nextval('hibernate_sequence')
 
INSERT INTO post (title, id)
VALUES ('High-Performance Java Persistence, Part 1', 1)
 
INSERT INTO post (title, id)
VALUES ('High-Performance Java Persistence, Part 2', 2)
 
INSERT INTO post (title, id)
VALUES ('High-Performance Java Persistence, Part 3', 3)
 
INSERT INTO post (title, id)
VALUES ('High-Performance Java Persistence, Part 4', 4)
 
INSERT INTO post (title, id)
VALUES ('High-Performance Java Persistence, Part 5', 5)

Thanks to @Pylinux. I have used his technique and also modified it to support "one" level of drop down menu (sub ul/li), as that is what I needed. See it in action in the fiddle link below.

Updated Fiddle based on pylinux's answer - http://jsfiddle.net/abhatia/en4qxw6g/

I made the following three changes, in order to support one level drop down menu:
1. Added a class value of dd (dropdown) for "a" element under li which needs to have sub ul list.

         <li><a class="dd">This link points to #/fun5</a>
          <ul>
            <li><a href="#/fun6?some=data">This link points to #/fun6</a>
            </li>
            <li><a href="#/fun7?some=data">This link points to #/fun7</a>
            </li>
            <li><a href="#/fun8?some=data">This link points to #/fun8</a>
            </li>
            <li><a href="#/fun9?some=data">This link points to #/fun9</a>
            </li>
          </ul>
        </li>

2. Updated Javascript to add the following new logic.

 if(angular.element(li).parent().parent().children('a').hasClass("dd"))
 {angular.element(li).parent().parent().children('a.dd').addClass('active');}

3. Updated CSS to the add the following:

a.active {background-color:red;}

Hopefully this will be helpful to someone looking to implement single level dropdown menu.

This is just a version mismatch. You have compiled your code using java version 9 and your current JRE is version 8. Try upgrading your JRE to 9.

49 = Java 5
50 = Java 6
51 = Java 7
52 = Java 8
53 = Java 9
54 = Java 10
55 = Java 11
56 = Java 12
57 = Java 13
58 = Java 14

You might want to use encodeURIComponent().

encodeURIComponent(""Busola""); // => %26quot%3BBusola%26quot%3B

It is possible to reference an intellij 'Path Variable' in an intellij 'Run Configuration'.

In 'Path Variables' create a variable for example ANALYTICS_VERSION.

In a 'Run Configuration' under 'Environment Variables' add for example the following:

ANALYTICS_LOAD_LOCATION=$MAVEN_REPOSITORY$\com\my\company\analytics\$ANALYTICS_VERSION$\bin

To answer the original question you would need to add an APP_HOME environment variable to your run configuration which references the path variable:

APP_HOME=$APP_HOME$

What is a DLL?

Dynamic Link Libraries (DLL)s are like EXEs but they are not directly executable. They are similar to .so files in Linux/Unix. That is to say, DLLs are MS's implementation of shared libraries.

DLLs are so much like an EXE that the file format itself is the same. Both EXE and DLLs are based on the Portable Executable (PE) file format. DLLs can also contain COM components and .NET libraries.

What does a DLL contain?

A DLL contains functions, classes, variables, UIs and resources (such as icons, images, files, ...) that an EXE, or other DLL uses.

Types of libraries:

On virtually all operating systems, there are 2 types of libraries. Static libraries and dynamic libraries. In windows the file extensions are as follows: Static libraries (.lib) and dynamic libraries (.dll). The main difference is that static libraries are linked to the executable at compile time; whereas dynamic linked libraries are not linked until run-time.

More on static and dynamic libraries:

You don't normally see static libraries though on your computer, because a static library is embedded directly inside of a module (EXE or DLL). A dynamic library is a stand-alone file.

A DLL can be changed at any time and is only loaded at runtime when an EXE explicitly loads the DLL. A static library cannot be changed once it is compiled within the EXE. A DLL can be updated individually without updating the EXE itself.

Loading a DLL:

A program loads a DLL at startup, via the Win32 API LoadLibrary, or when it is a dependency of another DLL. A program uses the GetProcAddress to load a function or LoadResource to load a resource.

Further reading:

Please check MSDN or Wikipedia for further reading. Also the sources of this answer.

I would use a duplex stream instead. like documented here nodejs doc duplex streams

A Transform stream is a Duplex stream where the output is computed in some way from the input.

This is a FAQ:

//somexpression[$N]

means "Find every node selected by //somexpression that is the $Nth child of its parent".

What you want is:

(//input[@id="search_query"])[2]

Remember: The [] operator has higher precedence (priority) than the // abbreviation.

echo "No" | copy/-Y c:\source c:\Dest\

Object.keys(myObj).length === 0;

As there is need to just check if Object is empty it will be better to directly call a native method Object.keys(myObj).length which returns the array of keys by internally iterating with for..in loop.As Object.hasOwnProperty returns a boolean result based on the property present in an object which itself iterates with for..in loop and will have time complexity O(N2).

On the other hand calling a UDF which itself has above two implementations or other will work fine for small object but will block the code which will have severe impact on overall perormance if Object size is large unless nothing else is waiting in the event loop.

I have the same issue as you did. I think the problem is that you used relative import in in-package import. There is no __init__.py in your directory. So just import as Moses answered above.

The core issue I think is when you import with a dot:

from .p_02_paying_debt_off_in_a_year import compute_balance_after

It is equivalent to:

from __main__.p_02_paying_debt_off_in_a_year import compute_balance_after

where __main__ refers to your current module p_03_using_bisection_search.py.

Briefly, the interpreter does not know your directory architecture.

When the interpreter get in p_03.py, the script equals:

from p_03_using_bisection_search.p_02_paying_debt_off_in_a_year import compute_balance_after

and p_03_using_bisection_search does not contain any modules or instances called p_02_paying_debt_off_in_a_year.

So I came up with a cleaner solution without changing python environment valuables (after looking up how requests do in relative import):

The main architecture of the directory is:

main.py
setup.py
problem_set_02/
   __init__.py
   p01.py
   p02.py
   p03.py

Then write in __init__.py:

from .p_02_paying_debt_off_in_a_year import compute_balance_after

Here __main__ is __init__ , it exactly refers to the module problem_set_02.

Then go to main.py:

import problem_set_02

You can also write a setup.py to add specific module to the environment.

If you're looking for an easier solution that doesn't involve installing npm packages, I'd checkout updatepackagejson.com

var array = $('#searchKeywords').val().split(",");

then

$.each(array,function(i){
   alert(array[i]);
});

OR

for (i=0;i<array.length;i++){
     alert(array[i]);
}

First, repeat this mantra for a little while: "unused memory is wasted memory". The Linux kernel keeps around huge amounts of file metadata and files that were requested, until something that looks more important pushes that data out. It's why you can run:

find /home -type f -name '*.mp3'
find /home -type f -name '*.aac'

and have the second find instance run at ridiculous speed.

Linux only leaves a little bit of memory 'free' to handle spikes in memory usage without too much effort.

Second, you want to find the processes that are eating all your memory; in top use the M command to sort by memory use. Feel free to ignore the VIRT column, that just tells you how much virtual memory has been allocated, not how much memory the process is using. RES reports how much memory is resident, or currently in ram (as opposed to swapped to disk or never actually allocated in the first place, despite being requested).

But, since RES will count e.g. /lib/libc.so.6 memory once for nearly every process, it isn't exactly an awesome measure of how much memory a process is using. The SHR column reports how much memory is shared with other processes, but there is no guarantee that another process is actually sharing -- it could be sharable, just no one else wants to share.

The smem tool is designed to help users better gage just how much memory should really be blamed on each individual process. It does some clever work to figure out what is really unique, what is shared, and proportionally tallies the shared memory to the processes sharing it. smem may help you understand where your memory is going better than top will, but top is an excellent first tool.

In the Trace properties, click the Events Selection tab at the top next to General. Then click Column Filters... at the bottom right. You can then select what to filter, such as TextData or DatabaseName.

Expand the Like node and enter your filter with the percentage % signs like %MyDatabaseName% or %TextDataToFilter%. Without the %% signs the filter will not work.

Also, make sure to check the checkbox Exclude rows that do not contain values' If you cannot find the field you are looking to filter such as DatabaseName go to the General tab and change your Template, blank one should contain all the fields.

I learned python first by myself over a summer just by doing the tutorial on the python site (sadly, I don't seem to be able to find that anymore, so I can't post a link).

Later, python was taught to me in one of my first year courses at university. In the summer that followed, I practiced with PythonChallenge and with problems from Google Code Jam. Solving these problems help from an algorithmic perspective as well as from the perspective of learning what Python can do as well as how to manipulate it to get the fullest out of python.

For similar reasons, I have heard that code golf works as well, but i have never tried it for myself.

The best way to accomplish that is to use POST which is a method of Hypertext Transfer Protocol https://developer.mozilla.org/en-US/docs/Web/HTTP/Methods

index.php

<html>
<body>

<form action="site2.php" method="post">
Name: <input type="text" name="name">
Email: <input type="text" name="email">
<input type="submit">
</form>

</body>
</html> 

site2.php

 <html>
 <body>

 Hello <?php echo $_POST["name"]; ?>!<br>
 Your mail is <?php echo $_POST["mail"]; ?>.

 </body>
 </html> 

output

Hello "name" !

Your email is "[email protected]" .

By invoking its toString() method.

Returns a string containing the characters in this sequence in the same order as this sequence. The length of the string will be the length of this sequence.

Just another way to use Git's awesomeness...

git difftool HEAD HEAD@{N} /PATH/FILE.ext

Simple. Just change the image orientation flag.

UIImage *oldImage = [UIImage imageNamed:@"whatever.jpg"];
UIImageOrientation newOrientation;
switch (oldImage.imageOrientation) {
    case UIImageOrientationUp:
        newOrientation = UIImageOrientationLandscapeLeft;
        break;
    case UIImageOrientationLandscapeLeft:
        newOrientation = UIImageOrientationDown;
        break;
    case UIImageOrientationDown:
        newOrientation = UIImageOrientationLandscapeRight;
        break;
    case UIImageOrientationLandscapeRight:
        newOrientation = UIImageOrientationUp;
        break;
    // you can also handle mirrored orientations similarly ...
}
UIImage *rotatedImage = [UIImage imageWithCGImage:oldImage.CGImage scale:1.0f orientation:newOrientation];

Fail module works great! Thanks.

I had to define my fact before checking it, otherwise I'd get an undefined variable error.

And I had issues when doing setting the fact with quotes and without spaces.

This worked:

set_fact: flag="failed"

This threw errors:

set_fact: flag = failed 

First of all you should use double "==" instead of "=" to compare two values. Using "=" You assigning value to variable in this case "somevar"

If you're using .NET 3.5 or .NET 4, it's easy to create the dictionary using LINQ:

Dictionary<string, ArrayList> result = target.GetComponents()
                                      .ToDictionary(x => x.Key, x => x.Value);

There's no such thing as an IEnumerable<T1, T2> but a KeyValuePair<TKey, TValue> is fine.

If you give the following command you'll get the list of activities including commits, merges.

git reflog

Your last commit should probably be at 'HEAD@{0}'. You can check the same with your commit message. To go to that point, use the command

git reset --hard 'HEAD@{0}'

Your merge will be reverted. If in case you have new files left, discard those changes from the merge.

In Java 8 there is another solution available by using java.util.Optional and the ifPresent-method.

Optional.ofNullable(list1).ifPresent(l -> l.forEach(item -> {/* do stuff */}));

So, not a solution for the exact problem but it is a oneliner and possibly more elegant.

([my double-compatible primitive type here])(Math.random() * [my max value here] * (Math.random() > 0.5 ? 1 : -1))

example:

// need a random number between -500 and +500
long myRandomLong = (long)(Math.random() * 500 * (Math.random() > 0.5 ? 1 : -1));

Added as a comment, but posting as an answer for visibility:

There seems to also be an issue if you initially setup a table view as "static cells" and then change it to "dynamic prototypes." I had an issue where even the delegate method for heightForRowAtIndexPath was being ignored. I first resolved it by directly editing the storyboard XML, then finally just rebuilt the storyboard scene from scratch, using dynamic prototypes from the start.

You can use belw code for show and hide bootstrap model.

$('#my-model').on('shown.bs.modal', function (e) {
  // do something here...
})

and if you want to hide model then you can use below code.

$('#my-model').on('hidden.bs.modal', function() {
    // do something here...
});

I hope this answer is useful for your project.

 lstr=[1, 2, 3]
 lstr=map(str,lstr)
 r=re.compile('^(3){1}')
 results=list(filter(r.match,lstr))
 print(results)

I checked all above said project version, module version, project bytecode version, target bytecode version settings in IntelliJ Idea, but all were the same as I scratched.

I face this error Error:java: invalid source release: 1.8 in IntelliJ Idea 2017.2.6 because I upgraded the dependency version Maven pom file, which(dependency) were supposed to build for JDK 1.8 application and I were building my application on and with maven compiler source and target JDK 1.7.

Hence I again downgrade the dependency version to earlier one in Maven pom, and the error gone after project Rebuild Module 'xyz_project'.

encode("latin-1") helped me in my case:

facultyname[0].encode("latin-1")

For substracting in moment.js:

moment().subtract(1, 'months').format('MMM YYYY');

Documentation:

http://momentjs.com/docs/#/manipulating/subtract/

Before version 2.8.0, the moment#subtract(String, Number) syntax was also supported. It has been deprecated in favor of moment#subtract(Number, String).

  moment().subtract('seconds', 1); // Deprecated in 2.8.0
  moment().subtract(1, 'seconds');

As of 2.12.0 when decimal values are passed for days and months, they are rounded to the nearest integer. Weeks, quarters, and years are converted to days or months, and then rounded to the nearest integer.

  moment().subtract(1.5, 'months') == moment().subtract(2, 'months')
  moment().subtract(.7, 'years') == moment().subtract(8, 'months') //.7*12 = 8.4, rounded to 8

sudo apt-get install libcurl4-openssl-dev

In the terminal just write : $ mongod --version

According to React philosophy component can't change its props. they should be received from the parent and should be immutable. Only parent can change the props of its children.

nice explanation on state vs props

also, read this thread Why can't I update props in react.js?

Suppose your drop down list is:

<asp:DropDownList runat="server" id="ddl">
<asp:ListItem Value="0" text="Select a Value">
....
</asp:DropDownList>

There are two ways:

<asp:RequiredFieldValidator ID="re1" runat="Server" InitialValue="0" />

the 2nd way is to use a compare validator:

<asp:CompareValidator ID="re1" runat="Server" ValueToCompare="0" ControlToCompare="ddl" Operator="Equal" />

There is a limit on the number of half-open connections, but afaik not for active connections. Although it appears to depend on the type of Windows 2008 server, at least according to this MSFT employee:

It depends on the edition, Web and Foundation editions have connection limits while Standard, Enterprise, and Datacenter do not.

SELECT * FROM tablename
  WHERE column IN 
    (select column from  tablename 
    where column like 'M510%' 
    or column like 'M615%' 
    OR column like 'M515%' 
    or column like'M612%'
    )

Years later, but for what it's worth - This is simple to do.

• Just RENAME the C:\xampp directory

• Install the desired new version of XAMPP

• Simply run the control panel script "xampp-control.exe" directly from within the xampp folder. (Ignore warnings about "must run from C:\xampp - those have nothing to do with multiple installations.)

To switch between these versions of XAMPP, just rename the xampp directories as necessary, and re-run.

I had this issue with npm v1.1.4 (and node v0.6.12), which are the Ubuntu 12.04 repository versions.

It looks like that version of npm isn't supported any more, updating node (and npm with it) resolved the issue.

First, uninstall the outdated version (optional, but I think this fixed an issue I was having with global modules not being pathed in).

sudo apt-get purge nodejs npm

Then enable nodesource's repo and install:

curl -sL https://deb.nodesource.com/setup | sudo bash -
sudo apt-get install -y nodejs

Note - the previous advice was to use Chris Lea's repo, he's now migrated that to nodesource, see:

• https://chrislea.com/2014/07/09/joining-forces-nodesource/
• https://nodesource.com/blog/chris-lea-joins-forces-with-nodesource

From: here

This is a bit of an outlier and not likely to be what the OP was dealing with, but pod update <podname> will not work in all cases if you are using a local pod on your computer.

In this situation, the only thing that will trigger pod update to work is if there is a change in the podspec file. However, making a change will also allow for pod install to work as well.

In this situation, you can just modify something minor such as the description or summary by one letter, and then you can run the install or update command successfully.

I don't know what kind of homework this is, but most probably the teacher doesn't want an answer where you just call a "magical" existing function (even though that's the recommended way to do it), but he wants to see if you can implement this by your own.

Back in the days, my teacher used to say something like "I want to see if you can program by yourself, not if you can find it in the system." Well, how wrong he was ;) ..

Anyway, if your teacher is the same, here is the hard way to do it..

std::string LongToString(long value)
{
  std::string output;
  std::string sign;

  if(value < 0)
  {
    sign + "-";
    value = -value;
  }

  while(output.empty() || (value > 0))
  {
    output.push_front(value % 10 + '0')
    value /= 10;
  }

  return sign + output;
}

You could argue that using std::string is not "the hard way", but I guess what counts in the actual agorithm.

Both approaches call a constructor, they just call different ones. This code:

var albumData = new Album 
                {
                     Name = "Albumius",
                     Artist = "Artistus",
                     Year = 2013
                };

is syntactic shorthand for this equivalent code:

var albumData = new Album();
albumData.Name = "Albumius";
albumData.Artist = "Artistus";
albumData.Year = 2013;

The two are almost identical after compilation (close enough for nearly all intents and purposes). So if the parameterless constructor wasn't public:

public Album() { }

then you wouldn't be able to use the object initializer at all anyway. So the main question isn't which to use when initializing the object, but which constructor(s) the object exposes in the first place. If the object exposes two constructors (like the one in your example), then one can assume that both ways are equally valid for constructing an object.

Sometimes objects don't expose parameterless constructors because they require certain values for construction. Though in cases like that you can still use the initializer syntax for other values. For example, suppose you have these constructors on your object:

private Album() { }
public Album(string name)
{
    this.Name = name;
}

Since the parameterless constructor is private, you can't use that. But you can use the other one and still make use of the initializer syntax:

var albumData = new Album("Albumius")
                {
                     Artist = "Artistus",
                     Year = 2013
                };

The post-compilation result would then be identical to:

var albumData = new Album("Albumius");
albumData.Artist = "Artistus";
albumData.Year = 2013;

In short, if you have multiple routes defined for your app's routing, enclosed with Switch component like this;

<Switch>

  <Route exact path="/" component={Home} />
  <Route path="/detail" component={Detail} />

  <Route exact path="/functions" component={Functions} />
  <Route path="/functions/:functionName" component={FunctionDetails} />

</Switch>

Then you have to put exact keyword to the Route which it's path is also included by another Route's path. For example home path / is included in all paths so it needs to have exact keyword to differentiate it from other paths which start with /. The reason is also similar to /functions path. If you want to use another route path like /functions-detail or /functions/open-door which includes /functions in it then you need to use exact for the /functions route.

Pixel is an absolute unit whereas rem/em are relative units. For more: https://drafts.csswg.org/css-values-3/

You should use the relative unit when you want the font-size to be adaptive according to the system's font size because the system provides the font-size value to the root element which is the HTML element.

In this case, where the webpage is open in google chrome, the font-size to the HTML element is set by chrome, try changing it to see the effect on webpages with fonts of rem/ em units.

If you use px as the unit for fonts, the fonts will not resize whereas the fonts with rem/ em unit will resize when you change the system's font size.

So use px when you want the size to be fixed and use rem/ em when you want the size to be adaptive/ dynamic to the size of the system.

You can create a progress-bar of any html element that you can set a gradient to. (Pretty cool!) In the sample below, the background of an HTML element is updated with a linear gradient with JavaScript:

myElement.style.background = "linear-gradient(to right, #57c2c1 " + percentage + "%, #4a4a52 " + percentage + "%)";

PS I have set both locations percentage the same to create a hard line. Play with the design, you can even add a border to get that classic progress-bar look :)

https://jsfiddle.net/uoL8j147/1/

Set your HTML as

<div id="body" hidden="">
 <h1>Numbers</h1>
 </div>
 <div id="body1" hidden="hidden">
 Body 1
 </div>

And now set the javascript as

function changeDiv()
  {
  document.getElementById('body').hidden = "hidden"; // hide body div tag
  document.getElementById('body1').hidden = ""; // show body1 div tag
  document.getElementById('body1').innerHTML = "If you can see this, JavaScript function worked"; 
  // display text if JavaScript worked
   }

• Choose type of iterator which fits your container: input, output, forward etc.
• Use base iterator classes from standard library. For example, std::iterator with random_access_iterator_tag.These base classes define all type definitions required by STL and do other work.

• To avoid code duplication iterator class should be a template class and be parametrized by "value type", "pointer type", "reference type" or all of them (depends on implementation). For example:

  // iterator class is parametrized by pointer type
  template <typename PointerType> class MyIterator {
      // iterator class definition goes here
  };
  
  typedef MyIterator<int*> iterator_type;
  typedef MyIterator<const int*> const_iterator_type;
  

  Notice iterator_type and const_iterator_type type definitions: they are types for your non-const and const iterators.

See Also: standard library reference

EDIT: std::iterator is deprecated since C++17. See a relating discussion here.

NOTE: If you are working with an HTML5 browser then you should ignore this answer. This is now possible as can be seen in the other answers.

There is no way to modify the URL in the browser without reloading the page. The URL represents what the last loaded page was. If you change it (document.location) then it will reload the page.

One obvious reason being, you write a site on www.mysite.com that looks like a bank login page. Then you change the browser URL bar to say www.mybank.com. The user will be totally unaware that they are really looking at www.mysite.com.

SupressFinalize tells the system that whatever work would have been done in the finalizer has already been done, so the finalizer doesn't need to be called. From the .NET docs:

Objects that implement the IDisposable interface can call this method from the IDisposable.Dispose method to prevent the garbage collector from calling Object.Finalize on an object that does not require it.

In general, most any Dispose() method should be able to call GC.SupressFinalize(), because it should clean up everything that would be cleaned up in the finalizer.

SupressFinalize is just something that provides an optimization that allows the system to not bother queuing the object to the finalizer thread. A properly written Dispose()/finalizer should work properly with or without a call to GC.SupressFinalize().

This is a small example that will convert 'image.png' to 'image.jpg' at 70% image quality:

<?php
$image = imagecreatefrompng('image.png');
imagejpeg($image, 'image.jpg', 70);
imagedestroy($image);
?>

Hope that helps

It's worth noting that Java can overload a method such as abs so that it works with an integer or a double. In C, overloading doesn't exist, so you need different functions for integer versus double.

UseParNewGC usually knowns as "parallel young generation collector" is same in all ways as the parallel garbage collector (-XX:+UseParallelGC), except that its more sophiscated and effiecient. Also it can be used with a "concurrent low pause collector".

See Java GC FAQ, question 22 for more information.

Note that there are some known bugs with UseParNewGC

Having a similar case and I couldn't use StackAttacks solution as he's referring to SDL2 which is for the legacy code I'm using too new.

Fortunately our friends from askUbuntu had something similar:

Download SDL

tar xvf SDL-1.2.tar.gz
cd SDL-1.2
./configure
make
sudo make install

The child process environment is lost in the moment it ceases to exist, and moving the environment content from there to the parent is somewhat tricky.

You probably need to spawn a shell script (you can generate one dynamically to /tmp) which will output the virtualenv environment variables to a file, which you then read in the parent Python process and put in os.environ.

Or you simply parse the activate script in using for the line in open("bin/activate"), manually extract stuff, and put in os.environ. It is tricky, but not impossible.

Include: #include<stdlib.h>

and use System("cls") instead of clrscr()

using an custom dtype definition, what worked for me was:

import numpy

# define custom dtype
type1 = numpy.dtype([('freq', numpy.float64, 1), ('amplitude', numpy.float64, 1)])
# declare empty array, zero rows but one column
arr = numpy.empty([0,1],dtype=type1)
# store row data, maybe inside a loop
row = numpy.array([(0.0001, 0.002)], dtype=type1)
# append row to the main array
arr = numpy.row_stack((arr, row))
# print values stored in the row 0
print float(arr[0]['freq'])
print float(arr[0]['amplitude'])

Try this formula:

=SUBSTITUTE(TEXT(A1/B1,"?/?"),"/",":")

Result:

A   B   C
33  11  3:1
25  5   5:1
6   4   3:2

Explanation:

• TEXT(A1/B1,"?/?") turns A/B into an improper fraction
• SUBSTITUTE(...) replaces the "/" in the fraction with a colon

This doesn't require any special toolkits or macros. The only downside might be that the result is considered text--not a number--so you can easily use it for further calculations.

Note: as @Robin Day suggested, increase the number of question marks (?) as desired to reduce rounding (thanks Robin!).

For Kotlin users (activity as AppCompatActivity).supportActionBar?.show()

I know it's already answered but couldn't you just synchronize the settings in the settings designer to move back to your default settings?

Gmail tends to block usage of mailing addresses which are being used in other applications as username for security reasons. Either you should create a new email address for mail purpose or you must go to the Less Secure App Access and turn on the access for less secure apps. Gmail will send you a mail for confirmation from where you can verify that those changes were made by yourself. Only then, you can use such mailing addresses for mailing purpose through applications.

The code you have posted here and code on your site both are different. There is a break <br> after second image, so the third image into new line, remove this <br> and it will display correctly.

This function returns all user defined routines in current database.

SELECT pg_get_functiondef(p.oid) FROM pg_proc p
INNER JOIN pg_namespace ns ON p.pronamespace = ns.oid
WHERE ns.nspname = 'public';

I think you may even have a separate table like a monthdetails (Monthno int, monthnames char(15)) and include values:

1 January
2 February 

.... and so on, and then join this table with your existing table in the monthnames column

SELECT t1.*,t2.Monthno from table1 
left outer join monthdetails t2
on t1.monthname=t2.monthnames
order by t2.Monthno 

Short Answer

It's not a HTTP response code, but it is documented by WhatWG as a valid value for the status attribute of an XMLHttpRequest or a Fetch response.

Broadly speaking, it is a default value used when there is no real HTTP status code to report and/or an error occurred sending the request or receiving the response. Possible scenarios where this is the case include, but are not limited to:

• The request hasn't yet been sent, or was aborted.
• The browser is still waiting to receive the response status and headers.
• The connection dropped during the request.
• The request timed out.
• The request encountered an infinite redirect loop.
• The browser knows the response status, but you're not allowed to access it due to security restrictions related to the Same-origin Policy.

Long Answer

First, to reiterate: 0 is not a HTTP status code. There's a complete list of them in RFC 7231 Section 6.1, that doesn't include 0, and the intro to section 6 states clearly that

The status-code element is a three-digit integer code

which 0 is not.

However, 0 as a value of the .status attribute of an XMLHttpRequest object is documented, although it's a little tricky to track down all the relevant details. We begin at https://xhr.spec.whatwg.org/#the-status-attribute, documenting the .status attribute, which simply states:

The status attribute must return the response’s status.

That may sound vacuous and tautological, but in reality there is information here! Remember that this documentation is talking here about the .response attribute of an XMLHttpRequest, not a response, so this tells us that the definition of the status on an XHR object is deferred to the definition of a response's status in the Fetch spec.

But what response object? What if we haven't actually received a response yet? The inline link on the word "response" takes us to https://xhr.spec.whatwg.org/#response, which explains:

An XMLHttpRequest has an associated response. Unless stated otherwise it is a network error.

So the response whose status we're getting is by default a network error. And by searching for everywhere the phrase "set response to" is used in the XHR spec, we can see that it's set in five places:

• To a network error, when:

  • the open() method is called, or
  • the response's body's stream is errored (see the algorithm described in the docs for the send() method)
  • the timed out flag is set, causing the request error steps to run
  • the abort() method is called, causing the request error steps to run

• To the response produced by sending the request using Fetch, by way of either the Fetch process response task (if the XHR request is asychronous) or the Fetch process response end-of-body task (if the XHR request is synchronous).

Looking in the Fetch standard, we can see that:

A network error is a response whose status is always 0

so we can immediately tell that we'll see a status of 0 on an XHR object in any of the cases where the XHR spec says the response should be set to a network error. (Interestingly, this includes the case where the body's stream gets "errored", which the Fetch spec tells us can happen during parsing the body after having received the status - so in theory I suppose it is possible for an XHR object to have its status set to 200, then encounter an out-of-memory error or something while receiving the body and so change its status back to 0.)

We also note in the Fetch standard that a couple of other response types exist whose status is defined to be 0, whose existence relates to cross-origin requests and the same-origin policy:

An opaque filtered response is a filtered response whose ... status is 0...

An opaque-redirect filtered response is a filtered response whose ... status is 0...

(various other details about these two response types omitted).

But beyond these, there are also many cases where the Fetch algorithm (rather than the XHR spec, which we've already looked at) calls for the browser to return a network error! Indeed, the phrase "return a network error" appears 40 times in the Fetch standard. I will not try to list all 40 here, but I note that they include:

• The case where the request's scheme is unrecognised (e.g. trying to send a request to madeupscheme://foobar.com)
• The wonderfully vague instruction "When in doubt, return a network error." in the algorithms for handling ftp:// and file:// URLs
• Infinite redirects: "If request’s redirect count is twenty, return a network error."
• A bunch of CORS-related issues, such as "If httpRequest’s response tainting is not "cors" and the cross-origin resource policy check with request and response returns blocked, then return a network error."
• Connection failures: "If connection is failure, return a network error."

In other words: whenever something goes wrong other than getting a real HTTP error status code like a 500 or 400 from the server, you end up with a status attribute of 0 on your XHR object or Fetch response object in the browser. The number of possible specific causes enumerated in spec is vast.

Finally: if you're interested in the history of the spec for some reason, note that this answer was completely rewritten in 2020, and that you may be interested in the previous revision of this answer, which parsed essentially the same conclusions out of the older (and much simpler) W3 spec for XHR, before these were replaced by the more modern and more complicated WhatWG specs this answers refers to.

The best you can do is import the dynamic library inside a bridging header:

1. Add libsqlite3.dylib to your "Link Binary With Libraries" build phase
2. Create a "Bridging-Header.h" and add #import <sqlite3.h> to the top
3. set "Bridging-Header.h" for the "Objective-C Bridging Header" setting in Build Settings under "Swift Compiler - Code Generation"

You will then be able to access all of the c methods like sqlite3_open from your swift code.

However, you may just want to use FMDB and import that through the bridging header as that is a more object oriented wrapper of sqlite. Dealing with C pointers and structs will be cumbersome in Swift.

I tried following on mac.

1. Launch Terminal and move to folder where adb is located. On Mac, usually at /Library/Android/sdk/platform-tools.
2. Connect device now with developer mode on and check device status with command ./adb status. "./" is to be prefixed with "adb".
3. Now we may need know destination folder location in our device. You can check this with adb shell. Use command ./adb shell to enter an adb shell. Now we have access to device's folder using shell.
4. You may list out all folders using command ls -la.
5. Usually we find a folder /sdcard within our device.(You can choose any folder here.) Suppose my destination is /sdcard/3233-3453/DCIM/Videos and source is ~/Documents/Videos/film.mp4
6. Now we can exit adb shell to access filesystem on our machine. Command: ./adb exit
7. Now ./adb push [source location] [destination location]
   i.e. ./adb push ~/Documents/Videos/film.mp4 /sdcard/3233-3453/DCIM/Videos
8. Voila.

Type the command mvn -version directly in your maven directory, you probably haven't added it to your PATH. Here are explained details of how to add maven to your PATH variable (I guess you use Windows because you are talking about CMD).

Wouldn't setting a css rule for all tables, and then a subsequent one for tables where class="dojoxGrid" work? Or am I missing something?

You could also try nextBoolean()-Method

Here is an example: http://www.tutorialspoint.com/java/util/random_nextboolean.htm

You can use the mt and mb spacing utilities to add extra margins to the <hr>, for example:

<hr class="mt-5 mb-5">

https://getbootstrap.com/docs/4.3/utilities/spacing/

No, there is no way in simple HTML. Javascript might be your only solution at this time..

Loop through all checkboxes in javascript and set them to unchecked:

var checkboxes = document.getElementsByTagName('input');

for (var i=0; i<checkboxes.length; i++)  {
  if (checkboxes[i].type == 'checkbox')   {
    checkboxes[i].checked = false;
  }
}

wrap it up in a onload listener and you should be fine then :)

Try this:

SELECT user.userID, edge.TailUser, edge.Weight 
FROM user
LEFT JOIN edge ON edge.HeadUser = User.UserID
WHERE edge.HeadUser=5043

OR

AND edge.HeadUser=5043

instead of WHERE clausule.

I've been willing to use something like this in a sheet where all lines are identical and usually refer to other cells in the same line - but as the formulas get complex, the references to other columns get hard to read. I tried the trick given in other answers, with for example column A named as "Sales" I can refers to it as INDEX(Sales;row()) but I found it a bit too long for my tastes.

However, in this particular case, I found that using Sales alone works just as well - Excel (2010 here) just gets the corresponding row automatically.

It appears to work with other ranges too; for example let's say I have values in A2:A11 which I name Sales, I can just use =Sales*0.21 in B2:11 and it will use the same row value, giving out ten different results.

I also found a nice trick on this page: named ranges can also be relative. Going back to your original question, if your value "Age" is in column A and assuming you're using that value in formulas in the same line, you can define Age as being $A2 instead of $A$2, so that when used in B5 or C5 for example, it will actually refer to $A5. (The Name Manager always show the reference relative to the cell currently selected)

Set's do not have an order - so you may lose your order when you convert your list into a set, i.e.:

>>> orderedVars = ['0', '1', '2', '3']
>>> setVars = set(orderedVars)
>>> print setVars
('4', '2', '3', '1')

Generally the order will remain, but for large sets it almost certainly won't.

Finally, just incase people are wondering, you don't need a ', ' in the join.

Just: ''.join(set)

:)

So you want to split on spaces, and on commas and periods that aren't surrounded by numbers. This should work:

r" |(?<![0-9])[.,](?![0-9])"

dialog.getWindow().setBackgroundDrawable(new ColorDrawable(ContextCompat.getColor(ctx, android.R.color.transparent)));

Depends on your needs, but there is also a quick way to temporarily check your (dummy) JSON by saving your JSON on http://myjson.com. Copy the api link and paste that into your javascript code. Viola! When you want to deploy the codes, you must not forget to change that url in your codes!

It seems wrong to me to set up an if/else statement just to use the else portion...

Just negate your condition, and you'll get the else logic inside the if:

if (!(id in tutorTimes)) { ... }

Calendar calendar = Calendar.getInstance();
Date date = calendar.getTime();
// 3 letter name form of the day
System.out.println(new SimpleDateFormat("EE", Locale.ENGLISH).format(date.getTime()));
// full name form of the day
System.out.println(new SimpleDateFormat("EEEE", Locale.ENGLISH).format(date.getTime()));

Result (for today):

Sat
Saturday

UPDATE: java8

LocalDate date = LocalDate.now();
DayOfWeek dow = date.getDayOfWeek();
System.out.println("Enum = " + dow);

String dayName = dow.getDisplayName(TextStyle.FULL, Locale.ENGLISH);
System.out.println("FULL = " + dayName);

dayName = dow.getDisplayName(TextStyle.FULL_STANDALONE, Locale.ENGLISH);
System.out.println("FULL_STANDALONE = " + dayName);

dayName = dow.getDisplayName(TextStyle.NARROW, Locale.ENGLISH);
System.out.println("NARROW = " + dayName);

dayName = dow.getDisplayName(TextStyle.NARROW_STANDALONE, Locale.ENGLISH);
System.out.println("NARROW_STANDALONE = " + dayName);

dayName = dow.getDisplayName(TextStyle.SHORT, Locale.ENGLISH);
System.out.println("SHORT = " + dayName);

dayName = dow.getDisplayName(TextStyle.SHORT_STANDALONE, Locale.ENGLISH);
System.out.println("SHORT_STANDALONE = " + dayName);

Result (for today):

Enum = SATURDAY
FULL = Saturday
FULL_STANDALONE = Saturday
NARROW = S
NARROW_STANDALONE = 6
SHORT = Sat
SHORT_STANDALONE = Sat

No, Community edition is free, so just sign-in and rid the warning. For more detail please check following link.
https://visualstudio.microsoft.com/vs/support/community-edition-expired-buy-license/

[edited to include BalusC's corrections] The SimpleDateFormat class should do the trick:

String pattern = "yyyy-MM-dd HH:mm:ss.S";
SimpleDateFormat format = new SimpleDateFormat(pattern);
try {
  Date date = format.parse("2011-01-18 00:00:00.0");
  System.out.println(date);
} catch (ParseException e) {
  e.printStackTrace();
}

If you want to create table with data . First create the table :

create table new_table as ( select * from old_table); 

and then insert

insert into new_table ( select * from old_table);

If you want to create table without data . You can use :

create table new_table as ( select * from old_table where 1=0);

The data returned by the JSON is in json format : which is simply an arrays of values. Thats why you are seeing [object Object],[object Object],[object Object].

You have to iterate through that values to get actuall value. Like the following

jQuery provides $.each() for iterations, so you could also do this:

$.getJSON("url_with_json_here", function(data){
    $.each(data, function (linktext, link) {
        console.log(linktext);
        console.log(link);
    });
});

Now just create an Hyperlink using that info.

EDIT: I tried using a CTE on my previous answer which was incorrect, as pointed out by @bummi. This option should work instead:

Here's one option using a CROSS APPLY, to kind of work around this problem:

SELECT st.Value, Constants.CONSTANT_ONE, Constants.CONSTANT_TWO
FROM SomeTable st
CROSS APPLY (
    SELECT 'Value1' AS CONSTANT_ONE,
           'Value2' AS CONSTANT_TWO
) Constants

"+" does not mutate the list

.append() mutates the old list

I removed the tag in the .project .

    <buildCommand>
        <name>org.eclipse.wst.jsdt.core.javascriptValidator</name>
        <arguments>
        </arguments>
    </buildCommand>

It's worked very well for me.

In your case, breaking the hash algorithm is equivalent to finding a collision in the hash algorithm. That means you don't need to find the password itself (which would be a preimage attack), you just need to find an output of the hash function that is equal to the hash of a valid password (thus "collision"). Finding a collision using a birthday attack takes O(2^(n/2)) time, where n is the output length of the hash function in bits.

SHA-2 has an output size of 512 bits, so finding a collision would take O(2^256) time. Given there are no clever attacks on the algorithm itself (currently none are known for the SHA-2 hash family) this is what it takes to break the algorithm.

To get a feeling for what 2^256 actually means: currently it is believed that the number of atoms in the (entire!!!) universe is roughly 10^80 which is roughly 2^266. Assuming 32 byte input (which is reasonable for your case - 20 bytes salt + 12 bytes password) my machine takes ~0,22s (~2^-2s) for 65536 (=2^16) computations. So 2^256 computations would be done in 2^240 * 2^16 computations which would take

2^240 * 2^-2 = 2^238 ~ 10^72s ~ 3,17 * 10^64 years

Even calling this millions of years is ridiculous. And it doesn't get much better with the fastest hardware on the planet computing thousands of hashes in parallel. No human technology will be able to crunch this number into something acceptable.

So forget brute-forcing SHA-256 here. Your next question was about dictionary words. To retrieve such weak passwords rainbow tables were used traditionally. A rainbow table is generally just a table of precomputed hash values, the idea is if you were able to precompute and store every possible hash along with its input, then it would take you O(1) to look up a given hash and retrieve a valid preimage for it. Of course this is not possible in practice since there's no storage device that could store such enormous amounts of data. This dilemma is known as memory-time tradeoff. As you are only able to store so many values typical rainbow tables include some form of hash chaining with intermediary reduction functions (this is explained in detail in the Wikipedia article) to save on space by giving up a bit of savings in time.

Salts were a countermeasure to make such rainbow tables infeasible. To discourage attackers from precomputing a table for a specific salt it is recommended to apply per-user salt values. However, since users do not use secure, completely random passwords, it is still surprising how successful you can get if the salt is known and you just iterate over a large dictionary of common passwords in a simple trial and error scheme. The relationship between natural language and randomness is expressed as entropy. Typical password choices are generally of low entropy, whereas completely random values would contain a maximum of entropy.

The low entropy of typical passwords makes it possible that there is a relatively high chance of one of your users using a password from a relatively small database of common passwords. If you google for them, you will end up finding torrent links for such password databases, often in the gigabyte size category. Being successful with such a tool is usually in the range of minutes to days if the attacker is not restricted in any way.

That's why generally hashing and salting alone is not enough, you need to install other safety mechanisms as well. You should use an artificially slowed down entropy-enducing method such as PBKDF2 described in PKCS#5 and you should enforce a waiting period for a given user before they may retry entering their password. A good scheme is to start with 0.5s and then doubling that time for each failed attempt. In most cases users don't notice this and don't fail much more often than three times on average. But it will significantly slow down any malicious outsider trying to attack your application.

You can get the current route using

const currentRoute = this.props.routes[this.props.routes.length - 1];

...which gives you access to the props from the lowest-level active <Route ...> component.

Given...

<Route path="childpath" component={ChildComponent} />

currentRoute.path returns 'childpath' and currentRoute.component returns function _class() { ... }.

Add BOM: UTF-8

file_put_contents($myFile, "\xEF\xBB\xBF".  $content); 

You need to close all your connexions for example: If you make an INSERT INTO statement you need to close the statement and your connexion in this way:

statement.close();
Connexion.close():

And if you make a SELECT statement you need to close the statement, the connexion and the resultset in this way:

resultset.close();
statement.close();
Connexion.close();

I did this and it worked

You can use

String hex = String.format("#%02x%02x%02x", r, g, b);  

Use capital X's if you want your resulting hex-digits to be capitalized (#FFFFFF vs. #ffffff).

Thank you @Murtuza. Your answer helped me to solve my problem but in my case

compile 'com.android.support:support-v13:19.+ also, along with

compile 'com.android.support:support-v4:19.+' compile 'com.android.support:appcompat-v7:19.+'

from compile 'com.android.support:support-v4:+' compile 'com.android.support:support-v7:+' compile 'com.android.support:support-v13:+' Hope this might help some one

You are missing a :selected on the selector for show() - see the jQuery documentation for an example of how to use this.

In your case it will probably look something like this:

$('#'+$('#colorselector option:selected').val()).show();

The first answer is good and gives some structural answers, but another approach is to think about what you're doing. Modules are about providing methods that you can use across multiple classes - think about them as "libraries" (as you would see in a Rails app). Classes are about objects; modules are about functions.

For example, authentication and authorization systems are good examples of modules. Authentication systems work across multiple app-level classes (users are authenticated, sessions manage authentication, lots of other classes will act differently based on the auth state), so authentication systems act as shared APIs.

You might also use a module when you have shared methods across multiple apps (again, the library model is good here).

This is what ended up working.

$("select").change(function(){
    $.get("/page.html?" + $(this).parent("form").find(":input").serialize()); 
});

<div style = "display: flex; justify-content:flex-end">
    <button>Click me!</button>
</div>

<div style = "display: flex; justify-content: flex-end">
    <button>Click me!</button>
</div>

I had the same problem, and xmltable helped me:

SELECT id, trim(COLUMN_VALUE) text FROM t, xmltable(('"' || REPLACE(text, ',', '","') || '"'))

I was also facing same issue. Below are the steps to resolve it.

1. check your openssl version

openssl version

2. If your version is below

OpenSSL 1.1.1h 22 Sep 2020

3. go to below link and download latest full version of openssl. openssl windows installer
4. After installation add openssl path at the top of 'PATH' variable in system path.
5. confirm your version is latest by opening new command prompt and running command in step 1
6. Now you're ready to run the command again and this time it will work.

Move the config files from src/main/java to src/main/resources.

If there's only some few components of your webview that is slow or laggy, try adding this to the elements css:

transform: translate3d(0,0,0);
-webkit-transform: translate3d(0,0,0);

This has been the only speedhack that really had a effect on my webview. But be careful not to overuse it! (you can read more about the hack in this article.)

If I understand you correctly, you want to compose a multipart request manually from an HTTP/REST console. The multipart format is simple; a brief introduction can be found in the HTML 4.01 spec. You need to come up with a boundary, which is a string not found in the content, let’s say HereGoes. You set request header Content-Type: multipart/form-data; boundary=HereGoes. Then this should be a valid request body:

--HereGoes
Content-Disposition: form-data; name="myJsonString"
Content-Type: application/json

{"foo": "bar"}
--HereGoes
Content-Disposition: form-data; name="photo"
Content-Type: image/jpeg
Content-Transfer-Encoding: base64

<...JPEG content in base64...>
--HereGoes--

According to the json.org specification, your return is invalid. The names are always quoted, so you should be returning

{ "title": "One", "key": "1" }

and

[ { "title": "One", "key": "1" }, { "title": "Two", "key": "2" } ]

This may not be the problem with your setup, since you say one of them works now, but it should be fixed for correctness in case you need to switch to another JSON parser in the future.

THIS IS FOR DEPLOYING TO A CUSTOM FOLDER (if you wanted your app not in root, e.g. URL/myApp/) - I looked for a longtime to find this answer...hope it helps someone.

Get the VUE CLI at https://cli.vuejs.org/guide/ and use the UI build to make it easy. Then in configuration you can change the public path to /whatever/ and link to it URL/whatever.

Check out this video which explains how to create a vue app using CLI if u need more help: https://www.youtube.com/watch?v=Wy9q22isx3U

I had android:textAllCaps = "false" in the androidmanifest which was creating havoc to the R file. I deleted it and all is fine. I think the target sdk was not set high enough.

The problem may be that ssh is trying to connect to all the different IPs that www.google.com resolves to. For example on my machine:

# ssh -v -o ConnectTimeout=1 -o ConnectionAttempts=1 www.google.com
OpenSSH_5.9p1, OpenSSL 0.9.8t 18 Jan 2012
debug1: Connecting to www.google.com [173.194.43.20] port 22.
debug1: connect to address 173.194.43.20 port 22: Connection timed out
debug1: Connecting to www.google.com [173.194.43.19] port 22.
debug1: connect to address 173.194.43.19 port 22: Connection timed out
debug1: Connecting to www.google.com [173.194.43.18] port 22.
debug1: connect to address 173.194.43.18 port 22: Connection timed out
debug1: Connecting to www.google.com [173.194.43.17] port 22.
debug1: connect to address 173.194.43.17 port 22: Connection timed out
debug1: Connecting to www.google.com [173.194.43.16] port 22.
debug1: connect to address 173.194.43.16 port 22: Connection timed out
ssh: connect to host www.google.com port 22: Connection timed out

If I run it with a specific IP, it returns much faster.

EDIT: I've timed it (with time) and the results are:

• www.google.com - 5.086 seconds
• 173.94.43.16 - 1.054 seconds

The dollar sign: $

Your json -

{
    "title":"Free Music Archive - Genres",
    "message":"",
    "errors":[
    ],
    "total":"163",
    "total_pages":82,
    "page":1,
    "limit":"2",
    "dataset":[
    {
    "genre_id":"1",
    "genre_parent_id":"38",
    "genre_title":"Avant-Garde",
    "genre_handle":"Avant-Garde",
    "genre_color":"#006666"
    },
    {
    "genre_id":"2",
    "genre_parent_id":null,
    "genre_title":"International",
    "genre_handle":"International",
    "genre_color":"#CC3300"
    }
    ]
    }

Using the JSON library from json.org -

JSONObject o = new JSONObject(jsonString);

NOTE:

The following information will be helpful to you - json.org.

UPDATE:

import org.json.JSONObject;
 //Other lines of code
URL seatURL = new URL("http://freemusicarchive.org/
 api/get/genres.json?api_key=60BLHNQCAOUFPIBZ&limit=2");
 //Return the JSON Response from the API
 BufferedReader br = new BufferedReader(new         
 InputStreamReader(seatURL.openStream(),
 Charset.forName("UTF-8")));
 String readAPIResponse = " ";
 StringBuilder jsonString = new StringBuilder();
 while((readAPIResponse = br.readLine()) != null){
   jsonString.append(readAPIResponse);
 }
 JSONObject jsonObj = new JSONObject(jsonString.toString());
 System.out.println(jsonString);
 System.out.println("---------------------------");
 System.out.println(jsonObj);

you can also do this using mounted

https://vuejs.org/v2/guide/migration.html#ready-replaced

....
methods:{
    getUnits: function() {...}
},
mounted: function(){
    this.$nextTick(this.getUnits)
}
....

When I use SourceTree to do the stuff, it will spit out this message.
The message that I encountered:

git -c diff.mnemonicprefix=false -c core.quotepath=false -c credential.helper=sourcetree submodule update --init --recursive
No submodule mapping found in .gitmodules for path 'SampleProject/SampleProject'
Completed with errors, see above

My scenario is I misapplied the project directory the contains .git folder.
SourceTree regarded this folder as git submodule, but actually not.

My solution is use command line to remove it.

$ git rm -r SampleProject --cached
$ git commit -m "clean up folders"

remove the garbage in git and keep it clean.

Remove the multiple="multiple" attribute and add SIZE=6 with the number of elements you want

you may want to check this site

http://www.htmlcodetutorial.com/forms/_SELECT.html

//By : Dhaval Nimavat
    import UIKit

   func weather_diff(country1:String,temp1:Double,country2:String,temp2:Double)->(c1:String,c2:String,diff:Double)
   {
    let c1 = country1
    let c2 = country2
    let diff = temp1 - temp2
    return(c1,c2,diff)
   }

   let result = 
   weather_diff(country1: "India", temp1: 45.5, country2: "Canada", temp2:    18.5)
   print("Weather difference between \(result.c1) and \(result.c2) is \(result.diff)")

As Tim Pietzcker said ECMAScript 2018 introduces named capturing groups into JavaScript regexes. But what I did not find in the above answers was how to use the named captured group in the regex itself.

you can use named captured group with this syntax: \k<name>. for example

var regexObj = /(?<year>\d{4})-(?<day>\d{2})-(?<month>\d{2}) year is \k<year>/

and as Forivin said you can use captured group in object result as follow:

let result = regexObj.exec('2019-28-06 year is 2019');
// result.groups.year === '2019';
// result.groups.month === '06';
// result.groups.day === '28';

  var regexObj = /(?<year>\d{4})-(?<day>\d{2})-(?<month>\d{2}) year is \k<year>/mgi;_x000D_
_x000D_
function check(){_x000D_
    var inp = document.getElementById("tinput").value;_x000D_
    let result = regexObj.exec(inp);_x000D_
    document.getElementById("year").innerHTML = result.groups.year;_x000D_
    document.getElementById("month").innerHTML = result.groups.month;_x000D_
    document.getElementById("day").innerHTML = result.groups.day;_x000D_
}

td, th{_x000D_
  border: solid 2px #ccc;_x000D_
}

<input id="tinput" type="text" value="2019-28-06 year is 2019"/>_x000D_
<br/>_x000D_
<br/>_x000D_
<span>Pattern: "(?<year>\d{4})-(?<day>\d{2})-(?<month>\d{2}) year is \k<year>";_x000D_
<br/>_x000D_
<br/>_x000D_
<button onclick="check()">Check!</button>_x000D_
<br/>_x000D_
<br/>_x000D_
<table>_x000D_
  <thead>_x000D_
    <tr>_x000D_
      <th>_x000D_
        <span>Year</span>_x000D_
      </th>_x000D_
      <th>_x000D_
        <span>Month</span>_x000D_
      </th>_x000D_
      <th>_x000D_
        <span>Day</span>_x000D_
      </th>_x000D_
    </tr>_x000D_
  </thead>_x000D_
  <tbody>_x000D_
    <tr>_x000D_
      <td>_x000D_
        <span id="year"></span>_x000D_
      </td>_x000D_
      <td>_x000D_
        <span id="month"></span>_x000D_
      </td>_x000D_
      <td>_x000D_
        <span id="day"></span>_x000D_
      </td>_x000D_
    </tr>_x000D_
  </tbody>_x000D_
</table>

You can also create a new document from MongoDB compass or using command and set the specific _id value that you want.

No other answer covers this method, so:

I find by far the most useful, simple, and reliable method is to ask your database. For example on Linux for Postgres you might do:

sudo su postgres
tail -f /var/log/postgresql/postgresql-8.4-main.log

Each database will have slightly different procedure. In the database logs you'll see not only the raw SQL, but any connection setup or transaction overhead django is placing on the system.

You can also make a vertical line using HTML horizontal line <hr />

html, body{height: 100%;}_x000D_
_x000D_
hr.vertical {_x000D_
  width: 0px;_x000D_
  height: 100%;_x000D_
  /* or height in PX */_x000D_
}

<hr class="vertical" />

Quick answer, maybe it'll help:

private void button1_Click(object sender, EventArgs e)
{            
    Form2 f2 = new Form2();
    f2.ShowDialog();
    while (f2.DialogResult == DialogResult.Retry)
    {
        f2 = new Form2();
        f2.ShowDialog();
    }
}

and in Form2 (The 'settings' Form):

private void button1_Click(object sender, EventArgs e)
{
    DialogResult = DialogResult.OK;
    Close();
}

private void button2_Click(object sender, EventArgs e)
{
    DialogResult = DialogResult.Retry;
    Close();
}

You can't update with a number greater than 1 for datatype number(2,2) is because, the first parameter is the total number of digits in the number and the second one (.i.e 2 here) is the number of digits in decimal part. I guess you can insert or update data < 1. i.e. 0.12, 0.95 etc.

Please check NUMBER DATATYPE in NUMBER Datatype.

Use declare

There is no need on using prefixes like on other answers, neither arrays. Use just declare, double quotes, and parameter expansion.

I often use the following trick to parse argument lists contanining one to n arguments formatted as key=value otherkey=othervalue etc=etc, Like:

# brace expansion just to exemplify
for variable in {one=foo,two=bar,ninja=tip}
do
  declare "${variable%=*}=${variable#*=}"
done
echo $one $two $ninja 
# foo bar tip

But expanding the argv list like

for v in "$@"; do declare "${v%=*}=${v#*=}"; done

Extra tips

# parse argv's leading key=value parameters
for v in "$@"; do
  case "$v" in ?*=?*) declare "${v%=*}=${v#*=}";; *) break;; esac
done
# consume argv's leading key=value parameters
while (( $# )); do
  case "$v" in ?*=?*) declare "${v%=*}=${v#*=}";; *) break;; esac
  shift
done

For my scheduler, I am using it to fire at 6 am every day and my cron notation is:

0 0 6 * * *

If you want 1:01:am then set it to

0 1 1 * * *

Complete code for the scheduler

@Scheduled(cron="0 1 1 * * *")
public void doScheduledWork() {
    //complete scheduled work
}

** VERY IMPORTANT

To be sure about the firing time correctness of your scheduler, you have to set zone value like this (I am in Istanbul):

@Scheduled(cron="0 1 1 * * *", zone="Europe/Istanbul")
public void doScheduledWork() {
    //complete scheduled work
}

You can find the complete time zone values from here.

Note: My Spring framework version is: 4.0.7.RELEASE

Do you only want to disassemble your actual main? If so try this:

(gdb) info line main 
(gdb) disas STARTADDRESS ENDADDRESS

Like so:

USER@MACHINE /cygdrive/c/prog/dsa
$ gcc-3.exe -g main.c

USER@MACHINE /cygdrive/c/prog/dsa
$ gdb a.exe
GNU gdb 6.8.0.20080328-cvs (cygwin-special)
...
(gdb) info line main
Line 3 of "main.c" starts at address 0x401050 <main> and ends at 0x401075 <main+
(gdb) disas 0x401050 0x401075
Dump of assembler code from 0x401050 to 0x401075:
0x00401050 <main+0>:    push   %ebp
0x00401051 <main+1>:    mov    %esp,%ebp
0x00401053 <main+3>:    sub    $0x18,%esp
0x00401056 <main+6>:    and    $0xfffffff0,%esp
0x00401059 <main+9>:    mov    $0x0,%eax
0x0040105e <main+14>:   add    $0xf,%eax
0x00401061 <main+17>:   add    $0xf,%eax
0x00401064 <main+20>:   shr    $0x4,%eax
0x00401067 <main+23>:   shl    $0x4,%eax
0x0040106a <main+26>:   mov    %eax,-0xc(%ebp)
0x0040106d <main+29>:   mov    -0xc(%ebp),%eax
0x00401070 <main+32>:   call   0x4010c4 <_alloca>
End of assembler dump.

I don't see your system interrupt call however. (its been a while since I last tried to make a system call in assembly. INT 21h though, last I recall

Try this :

from __future__ import division

raw = [0.07, 0.14, 0.07]  

def norm(input_list):
    norm_list = list()

    if isinstance(input_list, list):
        sum_list = sum(input_list)

        for value in input_list:
            tmp = value  /sum_list
            norm_list.append(tmp) 

    return norm_list

print norm(raw)

This will do what you asked. But I will suggest to try Min-Max normalization.

min-max normalization :

def min_max_norm(dataset):
    if isinstance(dataset, list):
        norm_list = list()
        min_value = min(dataset)
        max_value = max(dataset)

        for value in dataset:
            tmp = (value - min_value) / (max_value - min_value)
            norm_list.append(tmp)

    return norm_list

You mentioned that PHP solutions were acceptable, and PHP does offer a way to accomplish this even though it only supports XPath v1.0. You can extend the XPath support to allow PHP function calls.

$xpathObj = new DOMXPath($docObj);
$xpathObj->registerNamespace('php','http://php.net/xpath'); // (required)
$xpathObj->registerPhpFunctions("strtolower"); // (leave empty to allow *any* PHP function)
$xpathObj->query('//CD[php:functionString("strtolower",@title) = "empire burlesque"]');

See the PHP registerPhpFunctions documentation for more examples. It basically demonstrates that "php:function" is for boolean evaluation and "php:functionString" is for string evaluation.

You might also consider adding ".

For example for %i in (*.wav) do opusenc "%~ni.wav" "%~ni.opus" is very good idea.

It looks like what you really want a ListView with a custom adapter to inflate the specified layout. Using an ArrayAdapter and the method notifyDataSetChanged() you have full control of the Views generation and rendering.

Take a look at these tutorials

• http://www.softwarepassion.com/android-series-custom-listview-items-and-adapters/
• http://developerlife.com/tutorials/?p=327
• http://www.androidguys.com/2008/07/14/fancy-listviews-part-one/

I've found the liquibase.database.typeconversion.core.AbstractTypeConverter class. It lists all types that can be used:

protected DataType getDataType(String columnTypeString, Boolean autoIncrement, String dataTypeName, String precision, String additionalInformation) {
    // Translate type to database-specific type, if possible
    DataType returnTypeName = null;
    if (dataTypeName.equalsIgnoreCase("BIGINT")) {
        returnTypeName = getBigIntType();
    } else if (dataTypeName.equalsIgnoreCase("NUMBER") || dataTypeName.equalsIgnoreCase("NUMERIC")) {
        returnTypeName = getNumberType();
    } else if (dataTypeName.equalsIgnoreCase("BLOB")) {
        returnTypeName = getBlobType();
    } else if (dataTypeName.equalsIgnoreCase("BOOLEAN")) {
        returnTypeName = getBooleanType();
    } else if (dataTypeName.equalsIgnoreCase("CHAR")) {
        returnTypeName = getCharType();
    } else if (dataTypeName.equalsIgnoreCase("CLOB")) {
        returnTypeName = getClobType();
    } else if (dataTypeName.equalsIgnoreCase("CURRENCY")) {
        returnTypeName = getCurrencyType();
    } else if (dataTypeName.equalsIgnoreCase("DATE") || dataTypeName.equalsIgnoreCase(getDateType().getDataTypeName())) {
        returnTypeName = getDateType();
    } else if (dataTypeName.equalsIgnoreCase("DATETIME") || dataTypeName.equalsIgnoreCase(getDateTimeType().getDataTypeName())) {
        returnTypeName = getDateTimeType();
    } else if (dataTypeName.equalsIgnoreCase("DOUBLE")) {
        returnTypeName = getDoubleType();
    } else if (dataTypeName.equalsIgnoreCase("FLOAT")) {
        returnTypeName = getFloatType();
    } else if (dataTypeName.equalsIgnoreCase("INT")) {
        returnTypeName = getIntType();
    } else if (dataTypeName.equalsIgnoreCase("INTEGER")) {
        returnTypeName = getIntType();
    } else if (dataTypeName.equalsIgnoreCase("LONGBLOB")) {
        returnTypeName = getLongBlobType();
    } else if (dataTypeName.equalsIgnoreCase("LONGVARBINARY")) {
        returnTypeName = getBlobType();
    } else if (dataTypeName.equalsIgnoreCase("LONGVARCHAR")) {
        returnTypeName = getClobType();
    } else if (dataTypeName.equalsIgnoreCase("SMALLINT")) {
        returnTypeName = getSmallIntType();
    } else if (dataTypeName.equalsIgnoreCase("TEXT")) {
        returnTypeName = getClobType();
    } else if (dataTypeName.equalsIgnoreCase("TIME") || dataTypeName.equalsIgnoreCase(getTimeType().getDataTypeName())) {
        returnTypeName = getTimeType();
    } else if (dataTypeName.toUpperCase().contains("TIMESTAMP")) {
        returnTypeName = getDateTimeType();
    } else if (dataTypeName.equalsIgnoreCase("TINYINT")) {
        returnTypeName = getTinyIntType();
    } else if (dataTypeName.equalsIgnoreCase("UUID")) {
        returnTypeName = getUUIDType();
    } else if (dataTypeName.equalsIgnoreCase("VARCHAR")) {
        returnTypeName = getVarcharType();
    } else if (dataTypeName.equalsIgnoreCase("NVARCHAR")) {
        returnTypeName = getNVarcharType();
    } else {
        return new CustomType(columnTypeString,0,2);
    }

As Ennui mentioned, IE 10 supports the -ms prefixed version of Flexbox (IE 11 supports it unprefixed). The errors I can see in your code are:

• You should have display: -ms-flexbox instead of display: -ms-flex
• I think you should specify all 3 flex values, like flex: 0 1 auto to avoid ambiguity

So the final updated code is...

.flexbox form {
    display: -webkit-flex;
    display: -moz-flex;
    display: -ms-flexbox;
    display: -o-flex;
    display: flex;

    /* Direction defaults to 'row', so not really necessary to specify */
    -webkit-flex-direction: row;
    -moz-flex-direction: row;
    -ms-flex-direction: row;
    -o-flex-direction: row;
    flex-direction: row;
}

.flexbox form input[type=submit] {
    width: 31px;
}

.flexbox form input[type=text] {
    width: auto;

    /* Flex should have 3 values which is shorthand for 
       <flex-grow> <flex-shrink> <flex-basis> */
    -webkit-flex: 1 1 auto;
    -moz-flex: 1 1 auto;
    -ms-flex: 1 1 auto;
    -o-flex: 1 1 auto;
    flex: 1 1 auto;

    /* I don't think you need 'display: flex' on child elements * /
    display: -webkit-flex;
    display: -moz-flex;
    display: -ms-flex;
    display: -o-flex;
    display: flex;
    /**/
}

1 is a literal. name = value is an assignment. 1 = value is an assignment to a literal, which makes no sense. Why would you want 1 to mean something other than 1?

Reflection:

someClass.newInstance();

Solution is in target="_blank" like this:

http://www.ozzu.com/website-design-forum/multiple-form-submit-actions-t25024.html

edit form like this:

<form method="post" action="../booking/step1.php" onsubmit="doubleSubmit(this)">

And use this script:

    <script type="text/javascript">
<!--
function doubleSubmit(f)
{
  // submit to action in form
  f.submit();
  // set second action and submit
  f.target="_blank";
  f.action="../booking/vytvor.php";
  f.submit();
  return false;
}
//-->
</script>

First off, I will second the nomination of python's logging framework. Be a little careful about how you use it, however. Specifically: let the logging framework expand your variables, don't do it yourself. For instance, instead of:

logging.debug("datastructure: %r" % complex_dict_structure)

make sure you do:

logging.debug("datastructure: %r", complex_dict_structure)

because while they look similar, the first version incurs the repr() cost even if it's disabled. The second version avoid this. Similarly, if you roll your own, I'd suggest something like:

def debug_stdout(sfunc):
    print(sfunc())

debug = debug_stdout

called via:

debug(lambda: "datastructure: %r" % complex_dict_structure)

which will, again, avoid the overhead if you disable it by doing:

def debug_noop(*args, **kwargs):
    pass

debug = debug_noop

The overhead of computing those strings probably doesn't matter unless they're either 1) expensive to compute or 2) the debug statement is in the middle of, say, an n^3 loop or something. Not that I would know anything about that.

The default formatting is not very useful, in my opinion. I prefer ISO8601 as it's sortable, relatively compact and widely recognized:

>> require 'time'
=> true
>> Time.now.utc.iso8601
=> "2011-07-28T23:14:04Z"

Based on @user's answer, you can just add this extension anywhere in your app code and have your selection color directly in storyboard editor for every cells of your app :

@IBDesignable extension UITableViewCell {
    @IBInspectable var selectedColor: UIColor? {
        set {
            if let color = newValue {
                selectedBackgroundView = UIView()
                selectedBackgroundView!.backgroundColor = color
            } else {
                selectedBackgroundView = nil
            }
        }
        get {
            return selectedBackgroundView?.backgroundColor
        }
    }
}

The way to access a session variable in Twig is:

{{ app.session.get('name_variable') }}

Create a value class that will represent your compound key, such as:

class Index2D {
  int first, second;

  // overrides equals and hashCode properly here
}

taking care to override equals() and hashCode() correctly. If that seems like a lot of work, you might consider some ready made generic containers, such as Pair provided by apache commons among others.

There are also many similar questions here, with other ideas, such as using Guava's Table, although allows the keys to have different types, which might be overkill (in memory use and complexity) in your case since I understand your keys are both integers.

The following expression worked for me:

SELECT CONVERT(VARCHAR(1000), varbinary_value, 2);

Here are more details on the choice of style (the third parameter).

A variant of Thomas' solution: CSS element>element selectors can be handy here:

CSS

.paddedAnchor{
  position: relative;
}
.paddedAnchor > a{
  position: absolute;
  top: -100px;
}

HTML

<a href="#myAnchor">Click Me!</a>

<span class="paddedAnchor"><a name="myAnchor"></a></span>

A click on the link will move the scroll position to 100px above wherever the element with a class of paddedAnchor is positioned.

Supported in non-IE browsers, and in IE from version 9. For support on IE 7 and 8, a <!DOCTYPE> must be declared.

$http service returns a promise which has two callback methods as shown below.

$http({method: 'GET', url: '/someUrl'}).
  success(function(data, status, headers, config) {
     var anchor = angular.element('<a/>');
     anchor.attr({
         href: 'data:attachment/csv;charset=utf-8,' + encodeURI(data),
         target: '_blank',
         download: 'filename.csv'
     })[0].click();

  }).
  error(function(data, status, headers, config) {
    // handle error
  });

The characters '<', and '>', are to indicate a place-holder, you should remove them to read:

php /usr/local/solusvm/scripts/pass.php --type=admin --comm=change --username=ADMINUSERNAME

It is a security issue, so to fix it simply do the following:

1. Go to the Oracle Client folder.
2. Right Click on the folder.
3. On security Tab, Add "Authenticated Users" and give this account Read & Execute permission.
4. Apply this security for all folders, Subfolders and Files (IMPORTANT).
5. Don't Forget to REBOOT your Machine; if you forgot to do this you will still face the same problem unless you restart your machine.

http://blogs.msdn.com/b/fabdulwahab/archive/2011/11/13/system-data-oracleclient-requires-oracle-client-software-version-8-1-7-or-greater.aspx

IMPORTANT:

Please notice this solution is from 2015 might be too old and deprecated.

None of the above worked for me so I made a tutorial and wrote it for myself since I lost many hours trying to implement this. Hope this helps someone:

How to use Google Play Services LOCATION API to get current latitude & longitude

1) Add to your AndroidManifest.xml file the ACCESS_COARSE_LOCATION & ACCESS_FINE_LOCATION:

    <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.example.appname" >

        <uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" />
        <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />

        <application...

2) Go to app/build.gradlefile and add the following dependency (make sure to use the latest available version):

    dependencies {
        //IMPORTANT: make sure to use the newest version. 11.0.1 is old AF
        compile 'com.google.android.gms:play-services-location:11.0.1
    }

3) In your activity implement the following:

    import com.google.android.gms.common.ConnectionResult;
    import com.google.android.gms.common.api.GoogleApiClient;
    import com.google.android.gms.common.api.GoogleApiClient.ConnectionCallbacks;
    import com.google.android.gms.common.api.GoogleApiClient.OnConnectionFailedListener;
    import com.google.android.gms.location.LocationListener;
    import com.google.android.gms.location.LocationRequest;
    import com.google.android.gms.location.LocationServices;
    import com.google.android.gms.maps.GoogleMap;

    public class HomeActivity extends AppCompatActivity implements
            ConnectionCallbacks,
            OnConnectionFailedListener,
            LocationListener {

        //Define a request code to send to Google Play services
        private final static int CONNECTION_FAILURE_RESOLUTION_REQUEST = 9000;
        private GoogleApiClient mGoogleApiClient;
        private LocationRequest mLocationRequest;
        private double currentLatitude;
        private double currentLongitude;


        @Override
        protected void onCreate(Bundle savedInstanceState) {
            super.onCreate(savedInstanceState);
            setContentView(R.layout.activity_home);

            mGoogleApiClient = new GoogleApiClient.Builder(this)
                    // The next two lines tell the new client that “this” current class will handle connection stuff
                    .addConnectionCallbacks(this)
                    .addOnConnectionFailedListener(this)
                    //fourth line adds the LocationServices API endpoint from GooglePlayServices
                    .addApi(LocationServices.API)
                    .build();

            // Create the LocationRequest object
            mLocationRequest = LocationRequest.create()
                    .setPriority(LocationRequest.PRIORITY_HIGH_ACCURACY)
                    .setInterval(10 * 1000)        // 10 seconds, in milliseconds
                    .setFastestInterval(1 * 1000); // 1 second, in milliseconds

        }

        @Override
        protected void onResume() {
            super.onResume();
            //Now lets connect to the API
            mGoogleApiClient.connect();
        }

        @Override
        protected void onPause() {
            super.onPause();
            Log.v(this.getClass().getSimpleName(), "onPause()");

            //Disconnect from API onPause()
            if (mGoogleApiClient.isConnected()) {
                LocationServices.FusedLocationApi.removeLocationUpdates(mGoogleApiClient, this);
                mGoogleApiClient.disconnect();
            }


        }

        /**
         * If connected get lat and long
         * 
         */
        @Override
        public void onConnected(Bundle bundle) {
            Location location = LocationServices.FusedLocationApi.getLastLocation(mGoogleApiClient);

            if (location == null) {
                LocationServices.FusedLocationApi.requestLocationUpdates(mGoogleApiClient, mLocationRequest, this);

            } else {
                //If everything went fine lets get latitude and longitude
                currentLatitude = location.getLatitude();
                currentLongitude = location.getLongitude();

                Toast.makeText(this, currentLatitude + " WORKS " + currentLongitude + "", Toast.LENGTH_LONG).show();
            }
        }


        @Override
        public void onConnectionSuspended(int i) {}

        @Override
        public void onConnectionFailed(ConnectionResult connectionResult) {
            /*
             * Google Play services can resolve some errors it detects.
             * If the error has a resolution, try sending an Intent to
             * start a Google Play services activity that can resolve
             * error.
             */
            if (connectionResult.hasResolution()) {
                try {
                    // Start an Activity that tries to resolve the error
                    connectionResult.startResolutionForResult(this, CONNECTION_FAILURE_RESOLUTION_REQUEST);
                    /*
                     * Thrown if Google Play services canceled the original
                     * PendingIntent
                     */
                } catch (IntentSender.SendIntentException e) {
                    // Log the error
                    e.printStackTrace();
                }
            } else {
                /*
                 * If no resolution is available, display a dialog to the
                 * user with the error.
                 */
                Log.e("Error", "Location services connection failed with code " + connectionResult.getErrorCode());
            }
        }

        /**
         * If locationChanges change lat and long
         * 
         * 
         * @param location
         */
        @Override
        public void onLocationChanged(Location location) {
            currentLatitude = location.getLatitude();
            currentLongitude = location.getLongitude();

            Toast.makeText(this, currentLatitude + " WORKS " + currentLongitude + "", Toast.LENGTH_LONG).show();
        }

    }

If you need more info just go to:

The Beginner’s Guide to Location in Android

Note: This doesn't seem to work in the emulator but works just fine on a device

The error is pretty straightforward - the line starting with check_exists_sql isn't indented properly. From the context of your code, I'd indent it and the following lines to match the line before it:

   #open db connection
   db = MySQLdb.connect("localhost","root","str0ng","TESTDB")

   #prepare a cursor object using cursor() method
   cursor = db.cursor()

   #see if any links in the DB match the crawled link
   check_exists_sql = "SELECT * FROM LINKS WHERE link = '%s' LIMIT 1" % item['link']

   cursor.execute(check_exists_sql)

And keep indenting it until the for loop ends (all the way through to and including items.append(item).

A very simple way is to add the image as a background to a DIV then load an empty transparent gif set to the same size as the DIV in the foreground. that keeps the less determined out. They cant get the background without viewing the code and copying the URL and right clicking just downloads the transparent gif.

I also have the issue because of i have compile 'com.android.support:appcompat-v7:24.0.0-alpha1' but i added recyclerview liberary compile 'com.android.support:recyclerview-v7:24.0.2'..i changed the version as same as compat like (24.0.2 intead of 24.0.0).

i got the answer..may be it will help for someone.

I have at least one situation where the data is not automatically cleaned up, which would eventually lead to "Out of Memory" errors. In a UserForm I had:

Public mainPicture As StdPicture
...
mainPicture = LoadPicture(PAGE_FILE)

When UserForm was destroyed (after Unload Me) the memory allocated for the data loaded in the mainPicture was not being de-allocated. I had to add an explicit

mainPicture = Nothing

in the terminate event.

goto Mycomputer(This PC) -> rightclick ->select properties -> Advanced system settings -> environment variables-> in system variables click "New" button and write JAVA_HOME in variable name and path C:\Program Files\Java\jdk1.8.0_131 were jdk is present in variable value-> click ok.

close and reopen the command prompt after setting JAVA_HOME. Sometimes changes does not reflect in the cmd opened before setting the JAVA_HOME.

you can also set JAVA_HOME through terminal itself: SET JAVA_HOME="C:\Program Files (x86)\Java\jdk1.8.0_131"

Here's a method which allows you to register a Runnable to be executed once a particular web address has finished loading. We associate each Runnable with a corresponding URL String in a Map, and we use the WebView's getOriginalUrl() method to choose the appropriate callback.

package io.github.cawfree.webviewcallback;

/**
 *  Created by Alex Thomas (@Cawfree), 30/03/2017.
 **/

import android.net.http.SslError;
import android.os.Bundle;
import android.support.v7.app.AppCompatActivity;
import android.webkit.SslErrorHandler;
import android.webkit.WebView;
import android.webkit.WebViewClient;

import java.util.HashMap;
import java.util.Map;

/** An Activity demonstrating how to introduce a callback mechanism into Android's WebView. */
public class MainActivity extends AppCompatActivity {

    /* Member Variables. */
    private WebView               mWebView;
    private Map<String, Runnable> mCallbackMap;

    /** Create the Activity. */
    @Override protected final void onCreate(final Bundle pSavedInstanceState) {
        // Initialize the parent definition.
        super.onCreate(pSavedInstanceState);
        // Set the Content View.
        this.setContentView(R.layout.activity_main);
        // Fetch the WebView.
        this.mWebView     = (WebView)this.findViewById(R.id.webView);
        this.mCallbackMap = new HashMap<>();
        // Define the custom WebClient. (Here I'm just suppressing security errors, since older Android devices struggle with TLS.)
        this.getWebView().setWebViewClient(new WebViewClient() {
            /** Handle when a request has been launched. */
            @Override public final void onPageFinished(final WebView pWebView, final String pUrl) {
                // Determine whether we're allowed to process the Runnable; if the page hadn't been redirected, or if we've finished redirection.
                if(pUrl.equals(pWebView.getOriginalUrl())) {
                    // Fetch the Runnable for the OriginalUrl.
                    final Runnable lRunnable = getCallbackMap().get(pWebView.getOriginalUrl());
                    // Is it valid?
                    if(lRunnable != null) { lRunnable.run(); }
                }
                // Handle as usual.
                super.onPageFinished(pWebView, pUrl);
            }
            /** Ensure we handle SSL state properly. */
            @Override public final void onReceivedSslError(final WebView pWebView, final SslErrorHandler pSslErrorHandler, final SslError pSslError) { pSslErrorHandler.proceed(); }
        });
        // Assert that we wish to visit Zonal's website.
        this.getWebView().loadUrl("http://www.zonal.co.uk/");
        // Align a Callback for Zonal; this will be serviced once the page has loaded.
        this.getCallbackMap().put("http://www.zonal.co.uk/", new Runnable() {     @Override public void run() { /* Do something. */ } });
    }

    /* Getters. */
    public final WebView getWebView() {
        return this.mWebView;
    }

    private final Map<String, Runnable> getCallbackMap() {
        return this.mCallbackMap;
    }

}

You do cls.isFilled = True. That overwrites the method called isFilled and replaces it with the value True. That method is now gone and you can't call it anymore. So when you try to call it again you get an error, since it's not there anymore.

The solution is use a different name for the variable than you do for the method.

See also this previous answer which recommends the not keyword

How to check if a list is empty in Python?

It generalizes to more than just lists:

>>> a = ""
>>> not a
True

>>> a = []
>>> not a
True

>>> a = 0
>>> not a
True

>>> a = 0.0
>>> not a
True

>>> a = numpy.array([])
>>> not a
True

Notably, it will not work for "0" as a string because the string does in fact contain something - a character containing "0". For that you have to convert it to an int:

>>> a = "0"
>>> not a
False

>>> a = '0'
>>> not int(a)
True

Use VSC or any other editor that has Live server, it will give you a proxy that will allow you to use GET or FETCH

Set padding-top to be an appropriate value to push the x down, then subtract the value you have for padding-top from the height.

This is very old post but if anyone ran into similar problem and need quick answer:

• To capture if a ListBox item is clicked use MouseDown event.
• To capture if an item is clicked rather than empty space in list box check if listBox1.IndexFromPoint(new Point(e.X,e.Y))>=0
• To capture doubleclick event check if e.Clicks == 2

Have you tried the SVG text element?

.append("text").text(function(d, i) { return d[whichevernode];})

rect element doesn't permit text element inside of it. It only allows descriptive elements (<desc>, <metadata>, <title>) and animation elements (<animate>, <animatecolor>, <animatemotion>, <animatetransform>, <mpath>, <set>)

Append the text element as a sibling and work on positioning.

UPDATE

Using g grouping, how about something like this? fiddle

You can certainly move the logic to a CSS class you can append to, remove from the group (this.parentNode)

You could try this

box-shadow:
progid:DXImageTransform.Microsoft.dropshadow(OffX=0, OffY=10, Color='#19000000'), 
progid:DXImageTransform.Microsoft.dropshadow(OffX=10, OffY=20, Color='#19000000'), 
progid:DXImageTransform.Microsoft.dropshadow(OffX=20, OffY=30, Color='#19000000'), 
progid:DXImageTransform.Microsoft.dropshadow(OffX=30, OffY=40, Color='#19000000');

Drop the hash - that's for identifying the id attribute.

When calling a promise defined in a service or in a factory make sure to use service as I could not get response from a promise defined in a factory. This is how I call a promise defined in a service.

myApp.service('serverOperations', function($http) {
        this.get_data = function(user) {
          return $http.post('http://localhost/serverOperations.php?action=get_data', user);
        };
})


myApp.controller('loginCtrl', function($http, $q, serverOperations, user) {        
    serverOperations.get_data(user)
        .then( function(response) {
            console.log(response.data);
            }
        );
})

SQL> select Username from dba_users
  2  ;

USERNAME
------------------------------
SYS
SYSTEM
ANONYMOUS
APEX_PUBLIC_USER
FLOWS_FILES
APEX_040000
OUTLN
DIP
ORACLE_OCM
XS$NULL
MDSYS

USERNAME
------------------------------
CTXSYS
DBSNMP
XDB
APPQOSSYS
HR

16 rows selected.

SQL> create user testdb identified by password;

User created.

SQL> select username from dba_users;

USERNAME
------------------------------
TESTDB
SYS
SYSTEM
ANONYMOUS
APEX_PUBLIC_USER
FLOWS_FILES
APEX_040000
OUTLN
DIP
ORACLE_OCM
XS$NULL

USERNAME
------------------------------
MDSYS
CTXSYS
DBSNMP
XDB
APPQOSSYS
HR

17 rows selected.

SQL> grant create session to testdb;

Grant succeeded.

SQL> create tablespace testdb_tablespace
  2  datafile 'testdb_tabspace.dat'
  3  size 10M autoextend on;

Tablespace created.

SQL> create temporary tablespace testdb_tablespace_temp
  2  tempfile 'testdb_tabspace_temp.dat'
  3  size 5M autoextend on;

Tablespace created.

SQL> drop user testdb;

User dropped.

SQL> create user testdb
  2  identified by password
  3  default tablespace testdb_tablespace
  4  temporary tablespace testdb_tablespace_temp;

User created.

SQL> grant create session to testdb;

Grant succeeded.

SQL> grant create table to testdb;

Grant succeeded.

SQL> grant unlimited tablespace to testdb;

Grant succeeded.

SQL>

In Command line we can check our installed ng version.

ng -v OR ng --version OR ng version

This will give you like this :

 _                      _                 ____ _     ___

   / \   _ __   __ _ _   _| | __ _ _ __     / ___| |   |_ _|
  / ? \ | '_ \ / _` | | | | |/ _` | '__|   | |   | |    | |
 / ___ \| | | | (_| | |_| | | (_| | |      | |___| |___ | |
/_/   \_\_| |_|\__, |\__,_|_|\__,_|_|       \____|_____|___|
               |___/

Angular CLI: 1.6.5
Node: 8.0.0
OS: linux x64
Angular: 
...

You can use title. it'll work for just about everything

<div title="Great for making new friends through cooperation.">

<input script=JavaScript type=button title="Click for a compliment" onclick="window.alert('Your hair reminds me of a sunset across a prairie')" value="making you happy">

<table title="Great job working for those who understand the way i feel">

just think of any tag that can be visible to html window and insert a title="whatever tooltip you'd like" inside it's tag and you got yourself a tooltip.

This thread is a bit older but here something I just came across:

Try this code:

$date = new DateTime();
$arr = ['date' => $date];

echo $date->format('Ymd') . '<br>';
mytest($arr);
echo $date->format('Ymd') . '<br>';

function mytest($params = []) {
    if (isset($params['date'])) {
        $params['date']->add(new DateInterval('P1D'));
    }
}

http://codepad.viper-7.com/gwPYMw

Note there is no amp for the $params parameter and still it changes the value of $arr['date']. This doesn't really match with all the other explanations here and what I thought until now.

If I clone the $params['date'] object, the 2nd outputted date stays the same. If I just set it to a string it doesn't effect the output either.