Generally speaking, 5xx response codes indicate non-programmatic failures, such as a database connection failure, or some other system/library dependency failure. In many cases, it is expected that the client can re-submit the same request in the future and expect it to be successful.

Yes, some web-frameworks will respond with 5xx codes, but those are typically the result of defects in the code and the framework is too abstract to know what happened, so it defaults to this type of response; that example, however, doesn't mean that we should be in the habit of returning 5xx codes as the result of programmatic behavior that is unrelated to out of process systems. There are many, well defined response codes that are more suitable than the 5xx codes. Being unable to parse/validate a given input is not a 5xx response because the code can accommodate a more suitable response that won't leave the client thinking that they can resubmit the same request, when in fact, they can not.

To be clear, if the error encountered by the server was due to CLIENT input, then this is clearly a CLIENT error and should be handled with a 4xx response code. The expectation is that the client will correct the error in their request and resubmit.

It is completely acceptable, however, to catch any out of process errors and interpret them as a 5xx response, but be aware that you should also include further information in the response to indicate exactly what failed; and even better if you can include SLA times to address.

I don't think it's a good practice to interpret, "an unexpected error" as a 5xx error because bugs happen.

It is a common alert monitor to begin alerting on 5xx types of errors because these typically indicate failed systems, rather than failed code. So, code accordingly!

The $.getJSON() method is shorthand that does not let you specify advanced options like that. To do that, you need to use the full $.ajax() method.

Notice in the documentation at http://api.jquery.com/jQuery.getJSON/:

This is a shorthand Ajax function, which is equivalent to:

$.ajax({
  url: url,
  dataType: 'json',
  data: data,
  success: callback
});

So just use $.ajax() and provide all the extra parameters you need.

the nuget package Selenium.Support already contains an extension method to help with this. Once it is included, one liner to executer script

  Driver.ExecuteJavaScript("console.clear()");

or

  string result = Driver.ExecuteJavaScript<string>("console.clear()");

I'm not aware of any particular convention for javascript files as they aren't really unique on the web versus css files or html files or any other type of file like that. There are some "safe" things you can do that make it less likely you will accidentally run into a cross platform issue:

1. Use all lowercase filenames. There are some operating systems that are not case sensitive for filenames and using all lowercase prevents inadvertently using two files that differ only in case that might not work on some operating systems.
2. Don't use spaces in the filename. While this technically can be made to work there are lots of reasons why spaces in filenames can lead to problems.
3. A hyphen is OK for a word separator. If you want to use some sort of separator for multiple words instead of a space or camelcase as in various-scripts.js, a hyphen is a safe and useful and commonly used separator.
4. Think about using version numbers in your filenames. When you want to upgrade your scripts, plan for the effects of browser or CDN caching. The simplest way to use long term caching (for speed and efficiency), but immediate and safe upgrades when you upgrade a JS file is to include a version number in the deployed filename or path (like jQuery does with jquery-1.6.2.js) and then you bump/change that version number whenever you upgrade/change the file. This will guarantee that no page that requests the newer version is ever served the older version from a cache.

As Selman22 said, you are overriding the default object.Equals method, which accepts an object obj and not a safe compile time type.

In order for that to happen, make your type implement IEquatable<Box>:

public class Box : IEquatable<Box>
{
    double height, length, breadth;

    public static bool operator ==(Box obj1, Box obj2)
    {
        if (ReferenceEquals(obj1, obj2))
        {
            return true;
        }
        if (ReferenceEquals(obj1, null))
        {
            return false;
        }
        if (ReferenceEquals(obj2, null))
        {
            return false;
        }

        return obj1.Equals(obj2);
    }

    public static bool operator !=(Box obj1, Box obj2)
    {
        return !(obj1 == obj2);
    }

    public bool Equals(Box other)
    {
        if (ReferenceEquals(other, null))
        {
            return false;
        }
        if (ReferenceEquals(this, other))
        {
            return true;
        }

        return height.Equals(other.height) 
               && length.Equals(other.length) 
               && breadth.Equals(other.breadth);
    }

    public override bool Equals(object obj)
    {
        return Equals(obj as Box);
    }

    public override int GetHashCode()
    {
        unchecked
        {
            int hashCode = height.GetHashCode();
            hashCode = (hashCode * 397) ^ length.GetHashCode();
            hashCode = (hashCode * 397) ^ breadth.GetHashCode();
            return hashCode;
        }
    }
}

Another thing to note is that you are making a floating point comparison using the equality operator and you might experience a loss of precision.

Super-brief summary from what Professor Brasilford explains in this video.

Turing Complete ? do anything that a Turing Machine can do.

1. It has conditional branching (i.e. "if statement"). Also, implies "go to" and thus permitting loop.

2. It has arbitrary amount of memory (e.g. long enough tape) that the program needs.

You can reduce the per-call overhead by retaining the padding data, rather than rebuilding it every time:

public class RightPadder {

    private int length;
    private String padding;

    public RightPadder(int length, String pad) {
        this.length = length;
        StringBuilder sb = new StringBuilder(pad);
        while (sb.length() < length) {
            sb.append(sb);
        }
        padding = sb.toString();
   }

    public String pad(String s) {
        return (s.length() < length ? s + padding : s).substring(0, length);
    }

}

As an alternative, you can make the result length a parameter to the pad(...) method. In that case do the adjustment of the hidden padding in that method instead of in the constructor.

(Hint: For extra credit, make it thread-safe! ;-)

Just in case it helps someone, since these questions (and answers) helped me really much; I decided to create an alias that runs these 4 commands in a row:

Just add the following line to your ~/.bashrc file (modify the main keyword accordingly to the name of your .tex and .bib files)

alias texbib = 'pdflatex main.tex && bibtex main && pdflatex main.tex && pdflatex main.tex'

And now, by just executing the texbib command (alias), all these commands will be executed sequentially.

var http = require('http');
var fs = require('fs');

http.createServer(function(req, res) {
  res.writeHead(200,{'content-type':'image/jpg'});
  fs.createReadStream('./image/demo.jpg').pipe(res);
}).listen(3000);
console.log('server running at 3000');

Use the helper tool fd0ssh (from hxtools, not pmt). It works without having to expect a particular prompt from the ssh program.

You have ("Something2") by itself - you need to test it so a boolean is returned:

If strMyString.Contains("Something") or strMyString.Contains("Something2") Then

I'm quite fond of this solution myself:

ul {
    list-style-position: inside;
    list-style-type: disc;
    font-size: 12px;
    line-height: 1.4em;
    padding: 0 1em;
}

ul li {
    margin: 0 0 0 1em;
    padding: 0 0 0 1em;
    text-indent: -2em;
}

Take a look on life cycle of Activity

Where

***onCreate()***

Called when the activity is first created. This is where you should do all of your normal static set up: create views, bind data to lists, etc. This method also provides you with a Bundle containing the activity's previously frozen state, if there was one. Always followed by onStart().

***onStart()***

Called when the activity is becoming visible to the user. Followed by onResume() if the activity comes to the foreground, or onStop() if it becomes hidden.

And you can write your simple class to take a look when these methods call

public class TestActivity extends Activity {
    /** Called when the activity is first created. */

    private final static String TAG = "TestActivity";

    @Override
    public void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.main);
        Log.i(TAG, "On Create .....");
    }
    /* (non-Javadoc)
    * @see android.app.Activity#onDestroy()
    */
    @Override
    protected void onDestroy() { 
        super.onDestroy();
        Log.i(TAG, "On Destroy .....");
    }
    /* (non-Javadoc)
    * @see android.app.Activity#onPause()
    */
    @Override
    protected void onPause() { 
        super.onPause();
        Log.i(TAG, "On Pause .....");
    }

    /* (non-Javadoc)
    * @see android.app.Activity#onRestart()
    */
    @Override
    protected void onRestart() {
        super.onRestart();
        Log.i(TAG, "On Restart .....");
    }

    /* (non-Javadoc)
    * @see android.app.Activity#onResume()
    */
    @Override
    protected void onResume() {
        super.onResume();
        Log.i(TAG, "On Resume .....");
    }

    /* (non-Javadoc)
    * @see android.app.Activity#onStart()
    */
    @Override
    protected void onStart() {
        super.onStart();
        Log.i(TAG, "On Start .....");
    }
    /* (non-Javadoc)
    * @see android.app.Activity#onStop()
    */
    @Override
    protected void onStop() {
        super.onStop();
        Log.i(TAG, "On Stop .....");
    }
}

Hope this will clear your confusion.

And take a look here for details.

Lifecycle Methods in Details is a very good example and demo application, which is a very good article to understand the life cycle.

Goran.it's answer does not work because of unicode problem in javascript - https://developer.mozilla.org/en-US/docs/Web/API/WindowBase64/Base64_encoding_and_decoding.

I ended up using the function given on Daniel Guerrero's blog: http://blog.danguer.com/2011/10/24/base64-binary-decoding-in-javascript/

Function is listed on github link: https://github.com/danguer/blog-examples/blob/master/js/base64-binary.js

Use these lines

var uintArray = Base64Binary.decode(base64_string);  
var byteArray = Base64Binary.decodeArrayBuffer(base64_string); 

This is a BAD way to do it! I'm only leaving this answer in case it solves other weird problems. These better methods are the probably partly the result of newer data.table versions... so it's worth while to document this hard way. Plus, this is a nice syntax example for eval substitute syntax.

library(data.table)
dt <- data.table(ID = c(rep("A", 5), rep("B",5)), 
                 fac1 = c(1:5, 1:5), 
                 fac2 = c(1:5, 1:5) * 2, 
                 val1 = rnorm(10),
                 val2 = rnorm(10))

names_factors = c('fac1', 'fac2')
names_values = c('val1', 'val2')

for (col in names_factors){
  e = substitute(X := as.factor(X), list(X = as.symbol(col)))
  dt[ , eval(e)]
}
for (col in names_values){
  e = substitute(X := as.numeric(X), list(X = as.symbol(col)))
  dt[ , eval(e)]
}

str(dt)

which gives you

Classes ‘data.table’ and 'data.frame':  10 obs. of  5 variables:
 $ ID  : chr  "A" "A" "A" "A" ...
 $ fac1: Factor w/ 5 levels "1","2","3","4",..: 1 2 3 4 5 1 2 3 4 5
 $ fac2: Factor w/ 5 levels "2","4","6","8",..: 1 2 3 4 5 1 2 3 4 5
 $ val1: num  0.0459 2.0113 0.5186 -0.8348 -0.2185 ...
 $ val2: num  -0.0688 0.6544 0.267 -0.1322 -0.4893 ...
 - attr(*, ".internal.selfref")=<externalptr> 

You need to use an Angular form directive on the select. You can do that with ngModel. For example

@Component({
  selector: 'my-app',
  template: `
    <h2>Select demo</h2>
    <select [(ngModel)]="selectedCity" (ngModelChange)="onChange($event)" >
      <option *ngFor="let c of cities" [ngValue]="c"> {{c.name}} </option>
    </select>
  `
})
class App {
  cities = [{'name': 'SF'}, {'name': 'NYC'}, {'name': 'Buffalo'}];
  selectedCity = this.cities[1];

  onChange(city) {
    alert(city.name);
  }
}

The (ngModelChange) event listener emits events when the selected value changes. This is where you can hookup your callback.

Note you will need to make sure you have imported the FormsModule into the application.

Here is a Plunker

This way worked for me:

adding the path that you like:

export PYTHONPATH=$PYTHONPATH:/path/you/want/to/add

checking: you can run 'export' cmd and check the output or you can check it using this cmd:

python -c "import sys; print(sys.path)"

First few lines: man head.

Append lines: use the >> operator (?) in Bash:

echo 'This goes at the end of the file' >> file

Please verify your .project and .classpath files. Verify the java version and other reuqired details. If those and missing or mis matched

Define a class like this :

public class myclass {
       string id ;
       string title ;
       string content;
 }

 public class program {
        public void Main () {
               List<myclass> objlist = new List<myclass> () ;
               foreach (var value in objlist)  {
                       TextBox1.Text = value.id ;
                       TextBox2.Text= value.title;
                       TextBox3.Text= value.content ;
                }
         }
  }

I tried to draw a sketch and you can improve it in many ways. Instead of defining class "myclass", you can define struct.

If you want to run angular app ported from another machine without ng command then edit package.json as follows

"scripts": {
    "ng": "ng",
    "start": "node node_modules/.bin/ng serve",
    "build": "node node_modules/.bin/ng build",
    "test": "node node_modules/.bin/ng test",
    "lint": "node node_modules/.bin/ng lint",
    "e2e": "node node_modules/.bin/ng e2e"
  }

Finally run usual npm start command to start build server.

O(1) does not necessarily mean "quickly". It means that the time it takes is constant, and not based on the size of the input to the function. Constant could be fast or slow. O(n) means that the time the function takes will change in direct proportion to the size of the input to the function, denoted by n. Again, it could be fast or slow, but it will get slower as the size of n increases.

I had a similar problem with a different cause and therefore different solution. In my case, I actually had an error where a singleton object was having a member variable modified in a non-threadsafe way. In this case, following the accepted answers and circumventing the parallel testing would only hide the error that was actually revealed by the test. My solution, of course, is to fix the design so that I don't have this bad behavior in my code.

urllib is a standard python library (built-in) so you don't have to install it. just import it if you need to use request by:

import urllib.request

if it's not work maybe you compiled python in wrong way, so be kind and give us more details.

If you installed flutter via the snap on linux then the sdk is likely to be in

~/snap/flutter/common/flutter

To understand why we need constraints, you must first understand the value of data integrity.

Data Integrity refers to the validity of data. Are your data valid? Are your data representing what you have designed them to?

What weird questions I ask you might think, but sadly enough all too often, databases are filled with garbage data, invalid references to rows in other tables, that are long gone... and values that doesn't mean anything to the business logic of your solution any longer.

All this garbage is not alone prone to reduce your performance, but is also a time-bomb under your application logic that eventually will retreive data that it is not designed to understand.

Constraints are rules you create at design-time that protect your data from becoming corrupt. It is essential for the long time survival of your heart child of a database solution. Without constraints your solution will definitely decay with time and heavy usage.

You have to acknowledge that designing your database design is only the birth of your solution. Here after it must live for (hopefully) a long time, and endure all kinds of (strange) behaviour by its end-users (ie. client applications). But this design-phase in development is crucial for the long-time success of your solution! Respect it, and pay it the time and attention it requires.

A wise man once said: "Data must protect itself!". And this is what constraints do. It is rules that keep the data in your database as valid as possible.

There are many ways of doing this, but basically they boil down to:

• Foreign key constraints is probably the most used constraint, and ensures that references to other tables are only allowed if there actually exists a target row to reference. This also makes it impossible to break such a relationship by deleting the referenced row creating a dead link.
• Check constraints can ensure that only specific values are allowed in certain column. You could create a constraint only allowing the word 'Yellow' or 'Blue' in a VARCHAR column. All other values would yield an error. Get ideas for usage of check constraints check the sys.check_constraints view in the AdventureWorks sample database
• Rules in SQL Server are just reusable Check Constraints (allows you to maintain the syntax from a single place, and making it easier to deploy your constraints to other databases)

As I've hinted here, it takes some thorough considerations to construct the best and most defensive constraint approach for your database design. You first need to know the possibilities and limitations of the different constraint types above. Further reading could include:

FOREIGN KEY Constraints - Microsoft

Foreign key constraint - w3schools

CHECK Constraints

Good luck! ;)

Here is a simple iterative approach:

public static Node reverse(Node root) {
    if (root == null || root.next == null) {
        return root;
    }

    Node curr, prev, next;
    curr = root; prev = next = null;
    while (curr != null) {
        next = curr.next;
        curr.next = prev;

        prev = curr;
        curr = next;
    }
    return prev;
}

And here is a recursive approach:

public static Node reverseR(Node node) {
    if (node == null || node.next == null) {
        return node;
    }

    Node next = node.next;
    node.next = null;

    Node remaining = reverseR(next);
    next.next = node;
    return remaining;
}

In Oracle:

SELECT 'Hello world' FROM dual

Dual equivalent in SQL Server:

SELECT 'Hello world' 

Here's a simple Python code to calculate cosine similarity:

import math

def dot_prod(v1, v2):
    ret = 0
    for i in range(len(v1)):
        ret += v1[i] * v2[i]
    return ret

def magnitude(v):
    ret = 0
    for i in v:
        ret += i**2
    return math.sqrt(ret)

def cos_sim(v1, v2):
    return (dot_prod(v1, v2)) / (magnitude(v1) * magnitude(v2))

There are a few ways to handle rendering/showing controls on the page and you should take note to what happens with each method.

Rendering and Visibility

There are some instances where elements on your page don't need to be rendered for the user because of some type of logic or database value. In this case, you can prevent rendering (creating the control on the returned web page) altogether. You would want to do this if the control doesn't need to be shown later on the client side because no matter what, the user viewing the page never needs to see it.

Any controls or elements can have their visibility set from the server side. If it is a plain old html element, you just need to set the runat attribute value to server on the markup page.

<div id="myDiv" runat="server"></div>

The decision to render the div or not can now be done in the code behind class like so:

myDiv.Visible = someConditionalBool;

If set to true, it will be rendered on the page and if it's false it won't be rendered at all, not even hidden.

Client Side Hiding

Hiding an element is done on the client side only. Meaning, it's rendered but it has a display CSS style set on it which instructs your browser to not show it to the user. This is beneficial when you want to hide/show things based on user input. It's important to know that the element CAN be hidden on the server side too as long as the element/control has runat=server set just as I explained in the previous example.

Hiding in the Code Behind Class

To hide an element that you want rendered to the page but hidden is another simple single line of code:

myDiv.Style["display"] = "none";

If you have a need to remove the display style server side, it can be done by removing the display style, or setting it to a different value like inline or block (values described here).

myDiv.Style.Remove("display");
// -- or --
myDiv.Style["display"] = "inline";

Hiding on the Client Side with javascript

Using plain old javascript, you can easily hide the same element in this manner

var myDivElem = document.getElementById("myDiv");
myDivElem.style.display = "none";

// then to show again
myDivElem.style.display = "";

jQuery makes hiding elements a little simpler if you prefer to use jQuery:

var myDiv = $("#<%=myDiv.ClientID%>");
myDiv.hide();

// ... and to show 
myDiv.show();

Use the ampersand just like you would from the shell.

#!/usr/bin/bash
function_to_fork() {
   ...
}

function_to_fork &
# ... execution continues in parent process ...

A very simple example: Split a list of full names to get a list of names, regardless of first or last

 List<String> fullNames = Arrays.asList("Barry Allen", "Bruce Wayne", "Clark Kent");

 fullNames.stream()
            .flatMap(fullName -> Pattern.compile(" ").splitAsStream(fullName))
            .forEach(System.out::println);

This prints out:

Barry
Allen
Bruce
Wayne
Clark
Kent

This is a very useful question. It has 5 different helpful answers that say quite different but complementary things (surprising, eh?). This answer combines those answers into a more useful form as well as adding two more solutions.

There is no Oracle Express Edition for 64 bit Windows. See this official [but unanswered] forum thread. Therefore, these are the classes of solutions:

• Pay. The paid versions of Oracle (Standard/Enterprise) support 64-bit Windows.
• Hack. Many people have successfully installed the 32 bit Oracle XE software on 64 bit Windows. This blog post seems to be the one most often cited as helpful. This is unsupported, of course, and session trace is known to fail. But for many folks this is a good solution.
• VM. If your goal is simply to run Oracle on a 64 bit Windows machine, then running Oracle in a Virtual Machine may be a good solution. VirtualBox is a natural choice because it's free and Oracle provides pre-configured VMs with Oracle DB installed. VMWare or other virtualization systems work equally well.
• Develop only. Many users want Oracle XE just to learn Oracle or to test an application with Oracle. If that's your requirement, then Oracle Enterprise Edition (including support for 64-bit Windows) is free "only for the purpose of developing, testing, prototyping and demonstrating your application".

Add this code in css:

 select, input[type="text"]{
      width:100%;
      box-sizing:border-box;
    }

Maybe what comes from the server is already evaluated as JSON object? For example, using jQuery get method:

$.get('/service', function(data) {  
  var obj = data;

      /* 
         "obj" is evaluated at this point if server responded 
         with "application/json" or similar.
       */
      for (var i = 0; i < obj.length; i++) {
        console.log(obj[i].Name);
      }
    });

Alternatively, if you need to turn JSON object into JSON string literal, you can use JSON.stringify:

var json = [{"Id":"10","Name":"Matt"},{"Id":"1","Name":"Rock"}];
var jsonString = JSON.stringify(json);

But in this case I don't understand why you can't just take the json variable and refer to it instead of stringifying and parsing.

@bku_drytt's solution didn't do it for me.

I solved it by additionally changing every occurence of 14.0 to 12.0 and v140 to v120 manually in the .vcxproj files.

Then it compiled!

Write the src tag for calling the js file as

<script type='text/javascript' src='../Users/myUserName/Desktop/myPage.js'></script>

This should work.

You can also get the value of an item in the jObject like this:

JToken value;
if (json.TryGetValue(key, out value))
{
   DoSomething(value);
}

Look in the application's AndroidManifest.xml file for the <application> tag.

This application tag has an android:icon attribute, which is usually @drawable/ic_launcher. The value here is the name of the launcher icon file. If the value is @drawable/ic_launcher, then the name of the icon is ic_launcher.png.

Find this icon in your resource folders (res/mipmap-mdpi, res/mipmap-hdpi, etc.) and replace it.

A note on mipmap resources: If your launcher icon is currently in drawable folders such as res/drawable-hdpi, you should move them to the mipmap equivalents (e.g. res/mipmap-hdpi). Android will better preserve the resolution of drawables in the mipmap folder for display in launcher applications.

Android Studio note: If you are using Android Studio you can let studio place the drawables in the correct place for you. Simply right click on your application module and click New -> Image Asset.

For the icon type select either "Launcher Icons (Legacy Only)" for flat PNG files or "Launcher Icons (Adaptive and Legacy)" if you also want to generate an adaptive icon for API 26+ devices.

just want to add another variant to update this wonderful "how to" list. Though, It may be really useful in more complicated cases:

try {
    if (something)
    {
        //some code
        if (something2)
        {
            throw new Exception("Weird-01.");
            // now You will go to the catch statement
        }
        if (something3)
        {
            throw new Exception("Weird-02.");
            // now You will go to the catch statement
        }
        //some code
        return;
    }
}
catch (Exception ex)
{
    Console.WriteLine(ex); // you will get your Weird-01 or Weird-02 here
}
// The code i want to go if the second or third if is true

From HandlerIntercepter's javadoc:

HandlerInterceptor is basically similar to a Servlet Filter, but in contrast to the latter it just allows custom pre-processing with the option of prohibiting the execution of the handler itself, and custom post-processing. Filters are more powerful, for example they allow for exchanging the request and response objects that are handed down the chain. Note that a filter gets configured in web.xml, a HandlerInterceptor in the application context.

As a basic guideline, fine-grained handler-related pre-processing tasks are candidates for HandlerInterceptor implementations, especially factored-out common handler code and authorization checks. On the other hand, a Filter is well-suited for request content and view content handling, like multipart forms and GZIP compression. This typically shows when one needs to map the filter to certain content types (e.g. images), or to all requests.

With that being said:

So where is the difference between Interceptor#postHandle() and Filter#doFilter()?

postHandle will be called after handler method invocation but before the view being rendered. So, you can add more model objects to the view but you can not change the HttpServletResponse since it's already committed.

doFilter is much more versatile than the postHandle. You can change the request or response and pass it to the chain or even block the request processing.

Also, in preHandle and postHandle methods, you have access to the HandlerMethod that processed the request. So, you can add pre/post-processing logic based on the handler itself. For example, you can add a logic for handler methods that have some annotations.

What is the best practise in which use cases it should be used?

As the doc said, fine-grained handler-related pre-processing tasks are candidates for HandlerInterceptor implementations, especially factored-out common handler code and authorization checks. On the other hand, a Filter is well-suited for request content and view content handling, like multipart forms and GZIP compression. This typically shows when one needs to map the filter to certain content types (e.g. images), or to all requests.

Uninstall NPM and install it again.

As of February 27, 2014 npm no longer supports its self-signed certificates. http://blog.npmjs.org/post/78085451721/npms-self-signed-certificate-is-no-more

The link above suggests upgrading NPM using NPM. This also fails with SELF_SIGNED_CERT_IN_CHAIN...

You urls are not in the same repository, so you can't do it with the svn diff command.

svn: 'http://svn.boost.org/svn/boost/sandbox/boost/extension' isn't in the same repository as 'http://cloudobserver.googlecode.com/svn'

Another way you could do it, is export each repos using svn export, and then use the diff command to compare the 2 directories you exported.

// Export repositories
svn export http://svn.boost.org/svn/boost/sandbox/boost/extension/ repos1
svn export http://cloudobserver.googlecode.com/svn/branches/v0.4/Boost.Extension.Tutorial/libs/boost/extension/ repos2

// Compare exported directories
diff repos1 repos2 > file.diff

Unfortunately, there is no standard way to print using Python on all platforms. So you'll need to write your own wrapper function to print.

You need to detect the OS your program is running on, then:

For Linux -

import subprocess
lpr =  subprocess.Popen("/usr/bin/lpr", stdin=subprocess.PIPE)
lpr.stdin.write(your_data_here)

For Windows: http://timgolden.me.uk/python/win32_how_do_i/print.html

More resources:

Print PDF document with python's win32print module?

How do I print to the OS's default printer in Python 3 (cross platform)?

Use __cplusplus as suggested. Only one note for Microsoft compiler, use Zc:__cplusplus compiler switch to enable __cplusplus

Source https://devblogs.microsoft.com/cppblog/msvc-now-correctly-reports-__cplusplus/

use command npm init -f to generate package.json file and after that use --save after each command so that each module will automatically get updated inside your package.json for ex: npm install express --save

Try with

f.mkdirs() then createNewFile()

As Davide Gualano has been told. This one

$("#myDiv").load("myScript.php?var=x&var2=y&var3=z")

use GET method for sending the request, and this one

$("#myDiv").load("myScript.php", {var:x, var2:y, var3:z})

use POST method for sending the request. But any limitation that is applied to each method (post/get) is applied to the alternative usages that has been mentioned in the question.

For example: url length limits the amount of sending data in GET method.

It's better to cast it to HttpContextBase, this way you can mock and test it more easily

public string GetUserIp(HttpRequestMessage request)
{
    if (request.Properties.ContainsKey("MS_HttpContext"))
    {
        var ctx = request.Properties["MS_HttpContext"] as HttpContextBase;
        if (ctx != null)
        {
            return ctx.Request.UserHostAddress;
        }
    }

    return null;
}

If you're just using formOptions to pick a single value and then close, Mitch's suggestion is a good way to go. My example here would be used if you needed the child to communicate back to the parent while remaining open.

In your parent form, add a public method that the child form will call, such as

public void NotifyMe(string s)
{
    // Do whatever you need to do with the string
}

Next, when you need to launch the child window from the parent, use this code:

using (FormOptions formOptions = new FormOptions())
{
    // passing this in ShowDialog will set the .Owner 
    // property of the child form
    formOptions.ShowDialog(this);
}

In the child form, use this code to pass a value back to the parent:

ParentForm parent = (ParentForm)this.Owner;
parent.NotifyMe("whatever");

The code in this example would be better used for something like a toolbox window which is intended to float above the main form. In this case, you would open the child form (with .TopMost = true) using .Show() instead of .ShowDialog().

A design like this means that the child form is tightly coupled to the parent form (since the child has to cast its owner as a ParentForm in order to call its NotifyMe method). However, this is not automatically a bad thing.

Explanation of Serialize and Deserialize using Python

In python, pickle module is used for serialization. So, the serialization process is called pickling in Python. This module is available in Python standard library.

Serialization using pickle

import pickle

#the object to serialize
example_dic={1:"6",2:"2",3:"f"}

#where the bytes after serializing end up at, wb stands for write byte
pickle_out=open("dict.pickle","wb")
#Time to dump
pickle.dump(example_dic,pickle_out)
#whatever you open, you must close
pickle_out.close()

The PICKLE file (can be opened by a text editor like notepad) contains this (serialized data):

€}q (KX 6qKX 2qKX fqu.

Deserialization using pickle

import pickle

pickle_in=open("dict.pickle","rb")
get_deserialized_data_back=pickle.load(pickle_in)

print(get_deserialized_data_back)

Output:

{1: '6', 2: '2', 3: 'f'}

import re
s = raw_input('Type a word: ')
slower=''.join(re.findall(r'[a-z]',s))
supper=''.join(re.findall(r'[A-Z]',s))
print slower, supper

Prints:

Type a word: A Title of a Book
itleofaook ATB

Or you can use a list comprehension / generator expression:

slower=''.join(c for c in s if c.islower())
supper=''.join(c for c in s if c.isupper())
print slower, supper

Prints:

Type a word: A Title of a Book
itleofaook ATB

If you're using Java, Javascript or PHP, then there's a library that will do these calculations exactly, using some amusingly complicated (but still fast) trigonometry:

http://www.jstott.me.uk/jcoord/

if (android.os.Build.VERSION.SDK_INT >= 21) {
            storeViewHolder.storeNameTextView.setImageDrawable(context.getResources().getDrawable(array[position], context.getTheme()));
} else {
            storeViewHolder.storeNameTextView.setImageDrawable(context.getResources().getDrawable(array[position]));
}

you can just do $scope.todo = Todo.get({ id: 123 }). .get() and .query() on a Resource return an object immediately and fill it with the result of the promise later (to update your template). It's not a typical promise which is why you need to either use a callback or the $promise property if you have some special code you want executed after the call. But there is no need to assign it to your scope in a callback if you are only using it in the template.

I know this post is a few years old, but what I do is add this line to the top of your class and you will still be able to user Server.MapPath

Dim Server = HttpContext.Current.Server

or u can make a function

Public Function MapPath(sPath as String)
    return HttpContext.Current.Server.MapPath(sPath)
End Function

I am all about making things easier. I have also added it to my Utilities class just in case i run into this again.

How do I read a string from input?

You can read a single, whitespace terminated word with std::cin like this:

#include<iostream>
#include<string>
using namespace std;

int main()
{
    cout << "Please enter a word:\n";

    string s;
    cin>>s;

    cout << "You entered " << s << '\n';
}

Note that there is no explicit memory management and no fixed-sized buffer that you could possibly overflow. If you really need a whole line (and not just a single word) you can do this:

#include<iostream>
#include<string>
using namespace std;

int main()
{
    cout << "Please enter a line:\n";

    string s;
    getline(cin,s);

    cout << "You entered " << s << '\n';
}

you could even do it in this way:

sudo -u postgres psql -d myDataBase -a -f myInsertFile

If you have sudo access on machine and it's not recommended for production scripts just for test on your own machine it's the easiest way.

PHP

$fruits = array("apple" => "yellow", "strawberry" => "red", "kiwi" => "green");
<script>
    var color = <?php echo json_encode($fruits) ?>;
</script>
<script src="../yourexternal.js"></script>

JS (yourexternal.js)

alert("The apple color is" + color['apple'] + ", the strawberry color is " + color['strawberry'] + " and the kiwi color is " + color['kiwi'] + ".");

OUTPUT

The apple color is yellow, the strawberry color is red and the kiwi color is green.

Yes, you are synchronizing correctly. I will explain this in more detail. You must synchronize two or more method calls on the synchronizedMap object only in a case you have to rely on results of previous method call(s) in the subsequent method call in the sequence of method calls on the synchronizedMap object. Let’s take a look at this code:

synchronized (synchronizedMap) {
    if (synchronizedMap.containsKey(key)) {
        synchronizedMap.get(key).add(value);
    }
    else {
        List<String> valuesList = new ArrayList<String>();
        valuesList.add(value);
        synchronizedMap.put(key, valuesList);
    }
}

In this code

synchronizedMap.get(key).add(value);

and

synchronizedMap.put(key, valuesList);

method calls are relied on the result of the previous

synchronizedMap.containsKey(key)

method call.

If the sequence of method calls were not synchronized the result might be wrong. For example thread 1 is executing the method addToMap() and thread 2 is executing the method doWork() The sequence of method calls on the synchronizedMap object might be as follows: Thread 1 has executed the method

synchronizedMap.containsKey(key)

and the result is "true". After that operating system has switched execution control to thread 2 and it has executed

synchronizedMap.remove(key)

After that execution control has been switched back to the thread 1 and it has executed for example

synchronizedMap.get(key).add(value);

believing the synchronizedMap object contains the key and NullPointerException will be thrown because synchronizedMap.get(key) will return null. If the sequence of method calls on the synchronizedMap object is not dependent on the results of each other then you don't need to synchronize the sequence. For example you don't need to synchronize this sequence:

synchronizedMap.put(key1, valuesList1);
synchronizedMap.put(key2, valuesList2);

Here

synchronizedMap.put(key2, valuesList2);

method call does not rely on the results of the previous

synchronizedMap.put(key1, valuesList1);

method call (it does not care if some thread has interfered in between the two method calls and for example has removed the key1).

To read a line from a file, you should use the fgets function: It reads a string from the specified file up to either a newline character or EOF.

The use of sscanf in your code would not work at all, as you use filename as your format string for reading from line into a constant string literal %s.

The reason for SEGV is that you write into the non-allocated memory pointed to by line.

CSS 3

divContainer input[type="text"] {
    width:150px;
}

CSS2 add a class "text" to the text inputs then in your css

.divContainer.text{
    width:150px;
}

The Plus (+) will select the first immediate element. When you use + selector you have to give two parameters. This will be more clear by example: here div and span are parameters, so in this case only first span after the div will be styled.

 div+ span{
   color: green;
   padding :100px;
}

     <div>The top or first element  </div>
       <span >this is span immediately after div, this will be selected</span>
       <span>This will not be selected</span>

Above style will only apply to first span after div. It is important to note that second span will not be selected.

This Python snippet will git mv --force all files in a directory to be lowercase. For example, foo/Bar.js will become foo/bar.js via git mv foo/Bar.js foo/bar.js --force.

Modify it to your liking. I just figured I'd share :)

import os
import re

searchDir = 'c:/someRepo'
exclude = ['.git', 'node_modules','bin']
os.chdir(searchDir)

for root, dirs, files in os.walk(searchDir):
    dirs[:] = [d for d in dirs if d not in exclude]
    for f in files:
        if re.match(r'[A-Z]', f):
            fullPath = os.path.join(root, f)
            fullPathLower = os.path.join(root, f[0].lower() + f[1:])
            command = 'git mv --force ' + fullPath + ' ' + fullPathLower
            print(command)
            os.system(command)

Based on my comment to the accepted answer, there are a lot potential pitfalls that you may encounter by declaring font-sizes smaller than 12px. By declaring styles that lead to computed font-sizes of less than 12px, like so:

html {
  font-size: 8px;
}
p {
  font-size: 1.4rem;
}
// Computed p size: 11px.

You'll run into issues with browsers, like Chrome with a Chinese language pack that automatically renders any font sizes computed under 12px as 12px. So, the following is true:

h6 {
    font-size: 12px;
}
p {
   font-size: 8px;
}
// Both render at 12px in Chrome with a Chinese language pack.   
// How unpleasant of a surprise.

I would also argue that for accessibility reasons, you generally shouldn't use sizes under 12px. You might be able to make a case for captions and the like, but again--prepare to be surprised under some browser setups, and prepared to make your grandma squint when she's trying to read your content.

I would instead, opt for something like this:

h1 {
    font-size: 2.5rem;
}

h2 {
    font-size: 2.25rem;
}

h3 {
    font-size: 2rem;
}

h4 {
    font-size: 1.75rem;
}

h5 {
    font-size: 1.5rem;
}

h6 {
    font-size: 1.25rem;
}

p {
    font-size: 1rem;
}

@media (max-width: 480px) {
    html {
        font-size: 12px;
    }
}

@media (min-width: 480px) {
    html {
        font-size: 13px;
    }
}

@media (min-width: 768px) {
    html {
        font-size: 14px;
    }
}

@media (min-width: 992px) {
    html {
        font-size: 15px;
    }
}

@media (min-width: 1200px) {
    html {
        font-size: 16px;
    }
}

You'll find that tons of sites that have to focus on accessibility use rather large font sizes, even for p elements.

As a side note, setting margin-bottom equal to the font-size usually also tends to be attractive, i.e.:

h1 {
    font-size: 2.5rem;
    margin-bottom: 2.5rem;
}

Good luck.

You should be able to add

target="_blank"

like

<a href="http://www.starfall.com/" target="_blank">Starfall</a>

According to an article on Medium, this will work:

install --upgrade pandas==1.0.0rc0

As you're using C++ you could use std::string.

I have written my own that you can use. This one works has sqlite, is thread safe and is in C++ for UNIX.

You should be able to pick it apart and use the C compatible code.

http://code.google.com/p/mountain-cms/

While this is slightly off-topic, since people will find this by searching for "percentage sign in Python" (as I did), I wanted to note that the % sign is also used to prefix a "magic" function in iPython: https://ipython.org/ipython-doc/3/interactive/tutorial.html#magic-functions

If you are using jsvc to run tomcat as tomcat (run /etc/init.d/tomcat as root), edit /etc/init.d/tomcat and add $CATALINA_HOME/bin/tomcat-juli.jar to CLASSPATH.

Assuming ruby interpreter is in your PATH (it should be), you simply run

ruby your_file.rb

Another way of declaring multi-dimentional arrays:

Array.fill(4,3)("")

res3: Array[Array[String]] = Array(Array("", "", ""), Array("", "", ""),Array("", "", ""), Array("", "", ""))

I had a similar problem with HTML input fields in MVC. The web paged only showed the first keyword of the field. Example: input field: "The quick brown fox" Displayed value: "The"

The resolution was to put the variable in quotes in the value statement as follows:

<input class="ParmInput" type="text" id="respondingRangerUnit" name="respondingRangerUnit"
       onchange="validateInteger(this.value)" value="@ViewBag.respondingRangerUnit">

There is no standard, so there is no guarantee. With that said, its common for the sitemap to be self labeled and on the root, like this:

example.com/sitemap.xml

Case is sensitive on some servers, so keep that in mind. If its not there, look in the robots file on the root:

example.com/robots.txt

If you don't see it listed in the robots file head to Google and search this:

site:example.com filetype:xml

This will limit the results to XML files on your target domain. At this point its trial-and-error and based on the specifics of the website you are working with. If you get several pages of results from the Google search phrase above then try to limit the results further:

filetype:xml site:example.com inurl:sitemap

or

filetype:xml site:example.com inurl:products

If you still can't find it you can right-click > "View Source" and do a search (aka: "control find" or Ctrl + F) for .xml to see if there is a reference to it in the code.

you need to take 2 (hex) chars at the same time... then calculate the int value and after that make the char conversion like...

char d = (char)intValue;

do this for every 2chars in the hex string

this works if the string chars are only 0-9A-F:

#include <stdio.h>
#include <string.h>

int hex_to_int(char c){
        int first = c / 16 - 3;
        int second = c % 16;
        int result = first*10 + second;
        if(result > 9) result--;
        return result;
}

int hex_to_ascii(char c, char d){
        int high = hex_to_int(c) * 16;
        int low = hex_to_int(d);
        return high+low;
}

int main(){
        const char* st = "48656C6C6F3B";
        int length = strlen(st);
        int i;
        char buf = 0;
        for(i = 0; i < length; i++){
                if(i % 2 != 0){
                        printf("%c", hex_to_ascii(buf, st[i]));
                }else{
                        buf = st[i];
                }
        }
}

A few miscellaneous thoughts on this topic:

1. There is nothing unsafe about any of the hash iterators themselves. What is unsafe is modifying the keys of a hash while you're iterating over it. (It's perfectly safe to modify the values.) The only potential side-effect I can think of is that values returns aliases which means that modifying them will modify the contents of the hash. This is by design but may not be what you want in some circumstances.
2. John's accepted answer is good with one exception: the documentation is clear that it is not safe to add keys while iterating over a hash. It may work for some data sets but will fail for others depending on the hash order.
3. As already noted, it is safe to delete the last key returned by each. This is not true for keys as each is an iterator while keys returns a list.

XmlTextWriter xw = new XmlTextWriter(writer);
xw.Formatting = Formatting.Indented;

I use something like this (you should add code to deal with the various fails):

    var response = RunTaskWithTimeout<ReturnType>(
        (Func<ReturnType>)delegate { return SomeMethod(someInput); }, 30);


    /// <summary>
    /// Generic method to run a task on a background thread with a specific timeout, if the task fails,
    /// notifies a user
    /// </summary>
    /// <typeparam name="T">Return type of function</typeparam>
    /// <param name="TaskAction">Function delegate for task to perform</param>
    /// <param name="TimeoutSeconds">Time to allow before task times out</param>
    /// <returns></returns>
    private T RunTaskWithTimeout<T>(Func<T> TaskAction, int TimeoutSeconds)
    {
        Task<T> backgroundTask;

        try
        {
            backgroundTask = Task.Factory.StartNew(TaskAction);
            backgroundTask.Wait(new TimeSpan(0, 0, TimeoutSeconds));
        }
        catch (AggregateException ex)
        {
            // task failed
            var failMessage = ex.Flatten().InnerException.Message);
            return default(T);
        }
        catch (Exception ex)
        {
            // task failed
            var failMessage = ex.Message;
            return default(T);
        }

        if (!backgroundTask.IsCompleted)
        {
            // task timed out
            return default(T);
        }

        // task succeeded
        return backgroundTask.Result;
    }

<p style="color:black">Shop our collection of beautiful women's <br> <span> wedding ring in classic &amp; modern design.</span></p>

Remove <br> effect using CSS.

<style> p br{ display:none; } </style>

Summary:

Use is when you want to check against an object's identity (e.g. checking to see if var is None). Use == when you want to check equality (e.g. Is var equal to 3?).

Explanation:

You can have custom classes where my_var == None will return True

e.g:

class Negator(object):
    def __eq__(self,other):
        return not other

thing = Negator()
print thing == None    #True
print thing is None    #False

is checks for object identity. There is only 1 object None, so when you do my_var is None, you're checking whether they actually are the same object (not just equivalent objects)

In other words, == is a check for equivalence (which is defined from object to object) whereas is checks for object identity:

lst = [1,2,3]
lst == lst[:]  # This is True since the lists are "equivalent"
lst is lst[:]  # This is False since they're actually different objects

You can use the getchar routine.

From the above link:

/* getchar example : typewriter */
#include <stdio.h>

int main ()
{
  char c;
  puts ("Enter text. Include a dot ('.') in a sentence to exit:");
  do {
    c=getchar();
    putchar (c);
  } while (c != '.');
  return 0;
}

You should set your RecyclerView LayoutManager to Gridlayout mode. Just change your code when you want to set your RecyclerView LayoutManager:

recyclerView.setLayoutManager(new GridLayoutManager(getActivity(), numberOfColumns));

Refer the scripts inside the angular-cli.json (angular.json when using angular 6+) file.

"scripts": [
    "../path" 
 ];

then add in typings.d.ts (create this file in src if it does not already exist)

declare var variableName:any;

Import it in your file as

import * as variable from 'variableName';

With jQuery it can be like this:

var escapedValue = $('<div/>').text(value).html();

From related question Escaping HTML strings with jQuery

As mentioned in comment double quotes and single quotes are left as-is for this implementation. That means this solution should not be used if you need to make element attribute as a raw html string.

You need the Microsoft.AspNet.WebApi.Core package.

You can see it in the .csproj file:

<Reference Include="System.Web.Http, Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL">
  <SpecificVersion>False</SpecificVersion>
  <HintPath>..\packages\Microsoft.AspNet.WebApi.Core.5.0.0\lib\net45\System.Web.Http.dll</HintPath>
</Reference>

URL safe Base64 Encoding/Decoding

public static class Base64Url
{
    public static string Encode(string text)
    {
        return Convert.ToBase64String(Encoding.UTF8.GetBytes(text)).TrimEnd('=').Replace('+', '-')
            .Replace('/', '_');
    }

    public static string Decode(string text)
    {
        text = text.Replace('_', '/').Replace('-', '+');
        switch (text.Length % 4)
        {
            case 2:
                text += "==";
                break;
            case 3:
                text += "=";
                break;
        }
        return Encoding.UTF8.GetString(Convert.FromBase64String(text));
    }
}

Here is my full code using tag from remote search. Hope this is helpful.

$('#myInput').selectize({
valueField: 'id',
labelField: 'name',
searchField: 'name',
options: [],
delimiter: ',',
persist: false,
create: false,
load: function(query, callback) {
    if (!query.length) return callback();
    $.ajax({
        url: '/api/all_cities.php',
        type: 'GET',
        dataType: 'json',
        data: {
            name: query,
        },
        error: function() {
            callback();
        },
        success: function(res) {
            callback(res);
        }
    });
},
onInitialize: function(){
    var selectize = this;
    $.get("/api/selected_cities.php", function( data ) {
        selectize.addOption(data); // This is will add to option
        var selected_items = [];
        $.each(data, function( i, obj) {
            selected_items.push(obj.id);
        });
        selectize.setValue(selected_items); //this will set option values as default
    });
}
});

info = [];
info[0] = 'hi';
info[1] = 'hello';


$.ajax({
   type: "POST",
   data: {info:info},
   url: "index.php",
   success: function(msg){
     $('.answer').html(msg);
   }
});

They are used for formatting strings. %s acts a placeholder for a string while %d acts as a placeholder for a number. Their associated values are passed in via a tuple using the % operator.

name = 'marcog'
number = 42
print '%s %d' % (name, number)

will print marcog 42. Note that name is a string (%s) and number is an integer (%d for decimal).

See https://docs.python.org/3/library/stdtypes.html#printf-style-string-formatting for details.

In Python 3 the example would be:

print('%s %d' % (name, number))

It's not a direct answer to the question, however I would suggest in most cases to simply set multiple classes to each element:

<div class="myclass one"></div>
<div class="myclass two></div>
<div class="myclass three"></div>

In this way you can set rules for all myclass elements and then more specific rules for one, two and three.

.myclass { color: #f00; }

.two { font-weight: bold; }

etc.

Check out the BeamIt open source project. It will connect via bluetooth and WIFI (although it claims it does not do WIFI) and I have verified that it works well in my projects. It will allow peer to peer contact easily.

As for multiple connections, it is possible, but you will have to edit the BeamIt source code to make it possible. I suggest reading the GameKit programming guide

This can be achieved by using

PriorityQueue<Integer> pq = new PriorityQueue<Integer>(Collections.reverseOrder());

Adding to Brian Agnew's answer.

You can also do //div[@id='..' or @class='...] and you can have parenthesized expressions inside //div[@id='..' and (@class='a' or @class='b')].

I need to use visibility:hidden insted of display:none because visibility takes events, while display does not.

So I do .attr('visibility') === "visible"

Here is one example that worked for me.

find <mainfolder path> -name '*myfiles.java' | xargs -n 1 basename

With rxjs 6.2.2 and Angular 6.1.7, I was getting an:

Observable.timer is not a function

error. This was resolved by replacing Observable.timer with timer:

import { timer, Subscription } from 'rxjs';

private myTimerSub: Subscription;    

ngOnInit(){    
    const ti = timer(2000,1000);    
    this.myTimerSub = ti.subscribe(t => {    
        console.log("Tick");    
    });    
}    

ngOnDestroy() {    
    this.myTimerSub.unsubscribe();    
}

Assuming you must have two tables for the two employee types for some reason, I'll extend on vmarquez's answer:

Schema:

employees_ce (id, name)
employees_sn (id, name)
deductions (id, parentId, parentType, name)

Data in deductions:

deductions table
id      parentId      parentType      name
1       1             ce              gold
2       1             sn              silver
3       2             sn              wood
...

This would allow you to have deductions point to any other table in your schema. This kind of relation isn't supported by database-level constraints, IIRC so you'll have to make sure your App manages the constraint properly (which makes it more cumbersome if you have several different Apps/services hitting the same database).

Add this in your css file:

.custom_class
 {
    background-image: url(../img/beach.jpg);
    -moz-background-size: cover;
    -webkit-background-size: cover;
    -o-background-size: cover;
    background-size: cover;
 }

and then, in your .html (or .php) file call this class like that:

<div class="custom_class">
   ...
</div>

You can try this:

:backup move C:\FilesToBeBackedUp\*.* E:\BackupPlace\ timeout 36000 goto backup

If that doesn't work try to replace "timeout" with sleep. Ik this post is over a year old, just helping anyone with the same problem.

JSON, like xml and various other formats, is a tree-based serialization format. It won't love you if you have circular references in your objects, as the "tree" would be:

root B => child A => parent B => child A => parent B => ...

There are often ways of disabling navigation along a certain path; for example, with XmlSerializer you might mark the parent property as XmlIgnore. I don't know if this is possible with the json serializer in question, nor whether DatabaseColumn has suitable markers (very unlikely, as it would need to reference every serialization API)

This one actually comes from Firefox... for once, IE was ahead of the pack and allowed the removal of an element directly.

This is just my assumption, but I believe the reason that you must remove a child through the parent is due to an issue with the way Firefox handled the reference.

If you call an object to commit hari-kari directly, then immediately after it dies, you are still holding that reference to it. This has the potential to create several nasty bugs... such as failing to remove it, removing it but keeping references to it that appear valid, or simply a memory leak.

I believe that when they realized the issue, the workaround was to remove an element through its parent because when the element is gone, you are now simply holding a reference to the parent. This would stop all that unpleasantness, and (if closing down a tree node by node, for example) would 'zip-up' rather nicely.

It should be an easily fixable bug, but as with many other things in web programming, the release was probably rushed, leading to this... and by the time the next version came around, enough people were using it that changing this would lead to breaking a bunch of code.

Again, all of this is simply my guesswork.

I do, however, look forward to the day when web programming finally gets a full spring cleaning, all these strange little idiosyncracies get cleaned up, and everyone starts playing by the same rules.

Probably the day after my robot servant sues me for back wages.

There are two types of contexts we are dealing with:

1: root context (parent context. Typically include all jdbc(ORM, Hibernate) initialisation and other spring security related configuration)

2: individual servlet context (child context.Typically Dispatcher Servlet Context and initialise all beans related to spring-mvc (controllers , URL Mapping etc)).

Here is an example of web.xml which includes multiple application context file

<?xml version="1.0" encoding="UTF-8"?>_x000D_
<web-app xmlns="http://java.sun.com/xml/ns/javaee"_x000D_
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"_x000D_
        xsi:schemaLocation="http://java.sun.com/xml/ns/javaee_x000D_
                            http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">_x000D_
_x000D_
    <display-name>Spring Web Application example</display-name>_x000D_
_x000D_
    <!-- Configurations for the root application context (parent context) -->_x000D_
    <listener>_x000D_
        <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>_x000D_
    </listener>_x000D_
    <context-param>_x000D_
        <param-name>contextConfigLocation</param-name>_x000D_
        <param-value>_x000D_
            /WEB-INF/spring/jdbc/spring-jdbc.xml <!-- JDBC related context -->_x000D_
            /WEB-INF/spring/security/spring-security-context.xml <!-- Spring Security related context -->_x000D_
        </param-value>_x000D_
    </context-param>_x000D_
_x000D_
    <!-- Configurations for the DispatcherServlet application context (child context) -->_x000D_
    <servlet>_x000D_
        <servlet-name>spring-mvc</servlet-name>_x000D_
        <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class>_x000D_
        <init-param>_x000D_
            <param-name>contextConfigLocation</param-name>_x000D_
            <param-value>_x000D_
                /WEB-INF/spring/mvc/spring-mvc-servlet.xml_x000D_
            </param-value>_x000D_
        </init-param>_x000D_
    </servlet>_x000D_
    <servlet-mapping>_x000D_
        <servlet-name>spring-mvc</servlet-name>_x000D_
        <url-pattern>/admin/*</url-pattern>_x000D_
    </servlet-mapping>_x000D_
_x000D_
</web-app>

I saw one example that uses Import/Export-CLIXML.

These are my favorite commands for the issue you're trying to resolve. And the simplest way to use them is.

$passwordPath = './password.txt'
if (-not (test-path $passwordPath)) {
    $cred = Get-Credential -Username domain\username -message 'Please login.'
    Export-CliXML -InputObject $cred -Path $passwordPath
}
$cred = Import-CliXML -path $passwordPath

So if the file doesn't locally exist it will prompt for the credentials and store them. This will take a [pscredential] object without issue and will hide the credentials as a secure string.

Finally just use the credential like you normally do.

Restart-Computer -ComputerName ... -Credentail $cred

Note on Securty:

Securely store credentials on disk

When reading the Solution, you might at first be wary of storing a password on disk. While it is natural (and prudent) to be cautious of littering your hard drive with sensitive information, the Export-CliXml cmdlet encrypts credential objects using the Windows standard Data Protection API. This ensures that only your user account can properly decrypt its contents. Similarly, the ConvertFrom-SecureString cmdlet also encrypts the password you provide.

Edit: Just reread the original question. The above will work so long as you've initialized the [pscredential] to the hard disk. That is if you drop that in your script and run the script once it will create that file and then running the script unattended will be simple.

What the other answers suggest will work for the program in question, but it has the potential to cause breakage in other programs and unknown dependence elsewhere. It's better to make a tiny wrapper script:

#!/bin/sh
export LD_LIBRARY_PATH=/usr/local/lib64:$LD_LIBRARY_PATH
program_needing_different_run_time_library_path

This mostly avoids the problem described in Why LD_LIBRARY_PATH is bad by confining the effects to the program which needs them.

Note that despite the names LD_RUN_PATH works at link-time and is non-evil, while LD_LIBRARY_PATH works at both link and run time (and is evil :).

After two dozens of comments to understand the situation, it was found that the libhdf5.so.7 was actually a symlink (with several levels of indirection) to a file that was not shared between the queued processes and the interactive processes. This means even though the symlink itself lies on a shared filesystem, the contents of the file do not and as a result the process was seeing different versions of the library.

For future reference: other than checking LD_LIBRARY_PATH, it's always a good idea to check a library with nm -D to see if the symbols actually exist. In this case it was found that they do exist in interactive mode but not when run in the queue. A quick md5sum revealed that the files were actually different.

There are some issue with above written Regex.

This works perfectly.

^[a-zA-Z\d\-_.,\s]+$

Only allowed special characters are included here and can be extended after comma.

Your problem may be that the .env file is not loading properly and using the MAIL_USERNAME.

To check if your .env file is loading the email address properly add this line to your controller and refresh the page.

dd(env('MAIL_USERNAME') 

If it shows up null try running the following command from command line and trying again.

php artisan cache:clear

It would have worked out of the box if you hadn't used @EnableWebMvc annotation. When you do that you switch off all the things that Spring Boot does for you in WebMvcAutoConfiguration. You could remove that annotation, or you could add back the view controller that you switched off:

@Override
public void addViewControllers(ViewControllerRegistry registry) {
    registry.addViewController("/").setViewName("forward:/index.html");
}

You need to clear the OnCheckedChangeListener before setting setChecked():

@Override
public void onBindViewHolder(final ViewHolder holder, int position) {

    holder.mRadioButton.setOnCheckedChangeListener(null);
    holder.mRadioButton.setChecked(position == mCheckedPosition);
    holder.mRadioButton.setOnCheckedChangeListener(new CompoundButton.OnCheckedChangeListener() {
        @Override
        public void onCheckedChanged(CompoundButton buttonView, boolean isChecked) {

            mCheckedPosition = position;
            notifyDataSetChanged();
        }
    });
}

This way it won't trigger the java.lang.IllegalStateException: Cannot call this method while RecyclerView is computing a layout or scrolling error.

The first programming job I had was with a Microsoft QuickBASIC 4.5 shop. The lead developer had been working in BASIC just about forever, so most of the advanced (!) features of QuickBASIC were off-limits because they were new and he didn't understand them. So:

• No Sub/End Sub procedures. Everything was done with GOSUB
• We were allowed to not number lines that weren't the target of GOTO or GOSUB. But GOTO targets has to be a numeric label, not a name.
• Targets of GOSUB were allowed to be named, but the name had to prefixed by 'S' and a four digit number. All subroutines had to have the four digit number sorted in order in the source file. So a typical routine might be S1135InitializePrinter. You'd have to go and find the right routine to get the number, there were enough that you couldn't hope to remember them all.
• No block IF/END IF. All IFs had to have either a single GOTO or GOSUB as the conditional statement.

That was a really fun job. No, seriously.

My Problem:

• I started a container with docker run <IMAGE_NAME>
• And then added some files to this container
• Then I closed the container and tried to start it again withe same command as above.
• But when I checked the new files, they were missing
• when I run docker ps -a I could see two containers.
• That means every time I was running docker run <IMAGE_NAME> command, new image was getting created

Solution: To work on the same container you created in the first place run follow these steps

• docker ps to get container of your container
• docker container start <CONTAINER_ID> to start existing container
• Then you can continue from where you left. e.g. docker exec -it <CONTAINER_ID> /bin/bash
• You can then decide to create a new image out of it

+-----------------------------------------------------------------------------+
¦               ¦ class                     ¦ module                          ¦
¦---------------+---------------------------+---------------------------------¦
¦ instantiation ¦ can be instantiated       ¦ can *not* be instantiated       ¦
¦---------------+---------------------------+---------------------------------¦
¦ usage         ¦ object creation           ¦ mixin facility. provide         ¦
¦               ¦                           ¦   a namespace.                  ¦
¦---------------+---------------------------+---------------------------------¦
¦ superclass    ¦ module                    ¦ object                          ¦
¦---------------+---------------------------+---------------------------------¦
¦ methods       ¦ class methods and         ¦ module methods and              ¦
¦               ¦   instance methods        ¦   instance methods              ¦
¦---------------+---------------------------+---------------------------------¦
¦ inheritance   ¦ inherits behaviour and can¦ No inheritance                  ¦
¦               ¦   be base for inheritance ¦                                 ¦
¦---------------+---------------------------+---------------------------------¦
¦ inclusion     ¦ cannot be included        ¦ can be included in classes and  ¦
¦               ¦                           ¦   modules by using the include  ¦
¦               ¦                           ¦   command (includes all         ¦
¦               ¦                           ¦   instance methods as instance  ¦
¦               ¦                           ¦   methods in a class/module)    ¦
¦---------------+---------------------------+---------------------------------¦
¦ extension     ¦ can not extend with       ¦ module can extend instance by   ¦
¦               ¦   extend command          ¦   using extend command (extends ¦
¦               ¦   (only with inheritance) ¦   given instance with singleton ¦
¦               ¦                           ¦   methods from module)          ¦
+-----------------------------------------------------------------------------+

It turns out the answer was ridiculously simple, but mystifying as to why it was necessary.

In the IIS Manager on the server, I set the application pool for my web application to not allow 32-bit assemblies.

It seems it assumes, on a 64-bit system, that you must want the 32 bit assembly. Bizarre.

You can adjust the positioning of the text within a text field by making it a subclass of UITextField and overriding the -textRectForBounds: method.

Solution using just POST - no $_SESSION

page1.php

<form action="page2.php" method="post">
    <textarea name="textarea1" id="textarea1"></textarea><br />
    <input type="submit" value="submit" />
</form>

page2.php

<?php
    // this page outputs the contents of the textarea if posted
    $textarea1 = ""; // set var to avoid errors
    if(isset($_POST['textarea1'])){
        $textarea1 = $_POST['textarea1']
    }
?>
<textarea><?php echo $textarea1;?></textarea>

Solution using $_SESSION and POST

page1.php

<?php

    session_start(); // needs to be before anything else on page to use $_SESSION
    $textarea1 = "";
    if(isset($_POST['textarea1'])){
        $_SESSION['textarea1'] = $_POST['textarea1'];
    }

?>


<form action="page1.php" method="post">
    <textarea name="textarea1" id="textarea1"></textarea><br />
    <input type="submit" value="submit" />
</form>
<br /><br />
<a href="page2.php">Go to page2</a>

page2.php

<?php
    session_start(); // needs to be before anything else on page to use $_SESSION
    // this page outputs the textarea1 from the session IF it exists
    $textarea1 = ""; // set var to avoid errors
    if(isset($_SESSION['textarea1'])){
        $textarea1 = $_SESSION['textarea1']
    }
?>
<textarea><?php echo $textarea1;?></textarea>

WARNING!!! - This contains no validation!!!

According to PEP8, long lines should be placed in parentheses. When using parentheses, the lines can be broken up without using backslashes. You should also try to put the line break after boolean operators.

Further to this, if you're using a code style check such as pycodestyle, the next logical line needs to have different indentation to your code block.

For example:

if (abcdefghijklmnopqrstuvwxyz > some_other_long_identifier and
        here_is_another_long_identifier != and_finally_another_long_name):
    # ... your code here ...
    pass

Note: The following method will work on windows.

An alternative method (if it is ok to run a single version of PHP at a time) is to define multiple Apache services, each of which will use a different PHP version.

First of all use conditions in the Apache configuration file:

 <ifdefine php54>
    SetEnv PHPRC C:/apache/php54/
    ScriptAlias /php/ "C:/apache/php54/"
    AddType application/x-httpd-php .php
    Action application/x-httpd-php "/php/php-cgi.exe"
</ifdefine>

<ifdefine php55>
    SetEnv PHPRC C:/apache/php55/
    ScriptAlias /php/ "C:/apache/php55/"
    AddType application/x-httpd-php .php
    Action application/x-httpd-php "/php/php-cgi.exe"
</ifdefine>

Now using the httpd.exe create two separate services from command line (elevated to administrator):

httpd.exe -k install -n Apache224_php54 -D php54

httpd.exe -k install -n Apache224_php55 -D php55

Now you can start one of the above services at a time (should shutdown one before starting the other).

If you have previously installed Apache as service you can remove that using below command (replace the service name with the one you have used):

apache -k uninstall -n Apache224

One further note is that I personally use a "notification area icon program" called "Seobiseu" to start and stop services as needed. I have added the two above services to it.

The reason enums work easily with == is because each defined instance is also a singleton. So identity comparison using == will always work.

But using == because it works with enums means all your code is tightly coupled with usage of that enum.

For example: Enums can implement an interface. Suppose you are currently using an enum which implements Interface1. If later on, someone changes it or introduces a new class Impl1 as an implementation of same interface. Then, if you start using instances of Impl1, you'll have a lot of code to change and test because of previous usage of ==.

Hence, it's best to follow what is deemed a good practice unless there is any justifiable gain.

order deny,allow
deny from all
allow from <your ip> 

It can't be done with Javascript alone (unless the clients have a browser plugin as described above). It can't be done with Flash on the client either. But it can be done on the client using a Java applet (and javascript can talk to that), although it will prompt for full permissions. e.g. See http://www.findmyrouter.net

Consider a Windows app with FormA and FormB. FormA is the primary form and it displays FormB. Imagine FormB needing to pass data back to its parent.

If you did this:

class FormA 
{
    FormB fb = new FormB( this );

    ...
    fb.Show();
}

class FormB 
{
    FormA parent;

    public FormB( FormA parent )
    {
        this.parent = parent;
    }     
}

FormB is tightly coupled to FormA. FormB can have no other parent than that of type FormA.

If, on the other hand, you had FormB publish an event and have FormA subscribe to that event, then FormB could push data back through that event to whatever subscriber that event has. In this case then, FormB doesn't even know its talking back to its parent; through the loose coupling the event provides it's simply talking to subscribers. Any type can now be a parent to FormA.

rp

By converting the matrix to array by using

n12 = np.squeeze(np.asarray(n2))

X12 = np.squeeze(np.asarray(x1))

solved the issue.

Using both jquery Load and Ready neither seemed to really match when the iframe was TRULY ready.

I ended up doing something like this

$('#iframe').ready(function () {
    $("#loader").fadeOut(2500, function (sender) {
        $(sender).remove();
    });
});

Where #loader is an absolutely positioned div over top the iframe with a spinner gif.

I am using AngleSharp and have been very satisfied with it.

Here is a simple example how to fetch a page:

var config = Configuration.Default.WithDefaultLoader();
var document = await BrowsingContext.New(config).OpenAsync("https://www.google.com");

And now you have a web page in document variable. Then you can easily access it by LINQ or other methods. For example if you want to get a string value from a HTML table:

var someStringValue = document.All.Where(m =>
        m.LocalName == "td" &&
        m.HasAttribute("class") &&
        m.GetAttribute("class").Contains("pid-1-bid")
    ).ElementAt(0).TextContent.ToString();

To use CSS selectors please see AngleSharp examples.

If you're actually doing it just because you want to get the user's timezone then all you have to do is change your timezone in you config/applications.rb.

Like this:

Rails, by default, will save your time record in UTC even if you specify the current timezone.

config.time_zone = "Singapore"

So this is all you have to do and you're good to go.

You forgot to seek:

str.CopyTo(data);
data.Seek(0, SeekOrigin.Begin); // <-- missing line
byte[] buf = new byte[data.Length];
data.Read(buf, 0, buf.Length);

Hm. You have to specify window you clicked in Mouse.GetPosition(IInputElement relativeTo) Following code works well for me

protected override void OnMouseDown(MouseButtonEventArgs e)
    {
        base.OnMouseDown(e);
        Point p = e.GetPosition(this);
    }

I suspect that you need to refer to the window not from it own class but from other point of the application. In this case Application.Current.MainWindow will help you.

Use this command:

truncate -s 0 /home/SYSTEM_NAME/.ssh/known_hosts

Leaving the catch block empty should do the trick. This is almost always a bad idea, though. On one hand, there's a performance penalty, and on the other (and this is more important), you always want to know when there's an error.

I would guess that the "callee" function failing, in your case, is actually not necessarily an "error," so to speak. That is, it is expected for it to fail sometimes. If this is the case, there is almost always a better way to handle it than using exceptions.

There are, if you'll pardon the pun, exceptions to the "rule", though. For example, if function2 were to call a web service whose results aren't really necessary for your page, this kind of pattern might be ok. Although, in almost 100% of cases, you should at least be logging it somewhere. In this scenario I'd log it in a finally block and report whether or not the service returned. Remember that data like that which may not be valuable to you now can become valuable later!

Last edit (probably):

In a comment I suggested you put the try/catch inside function2. Just thought I would elaborate. Function2 would look like this:

public Something? function2()
{
    try
    {
        //all of your function goes here
        return anActualObjectOfTypeSomething;
    }
    catch(Exception ex)
    {
        //logging goes here
        return null;
    }
}

That way, since you use a nullable return type, returning null doesn't hurt you.

You can set its visibility property to hidden.

Here is a little demonstration, where one button is used to toggle the other one:

<input type="button" id="toggler" value="Toggler" onClick="action();" />
<input type="button" id="togglee" value="Togglee" />

<script>
    var hidden = false;
    function action() {
        hidden = !hidden;
        if(hidden) {
            document.getElementById('togglee').style.visibility = 'hidden';
        } else {
            document.getElementById('togglee').style.visibility = 'visible';
        }
    }
</script>

onreadystatechange Stores a function (or the name of a function) to be called automatically each time the readyState property changes readyState Holds the status of the XMLHttpRequest. Changes from 0 to 4:

0: request not initialized

1: server connection established

2: request received

3: processing request

4: request finished and response is ready

status 200: "OK"

404: Page not found

This is the easiest way to do this:

$text = var_export($bool_value,true);
echo $text;

or

var_export($bool_value)

If the second argument is not true, it will output the result directly.

The normal procedure with Eclipse and Java EE webapplications is to install a servlet container (Tomcat, Jetty, etc) or application server (Glassfish (which is bundled in the "Sun Java EE" download), JBoss AS, WebSphere, Weblogic, etc) and integrate it in Eclipse using a (builtin) plugin in the Servers view.

During the creation wizard of a new Dynamic Web Project, you can then pick the integrated server from the list. If you happen to have an existing Dynamic Web Project without a server or want to change the associated one, then you need to modify it in the Targeted Rutimes section of the project's properties.

Either way, Eclipse will automatically place the necessary server-specific libraries in the project's classpath (buildpath).

You should absolutely in no way extract and copy server-specific libraries into /WEB-INF/lib or even worse the JRE/lib yourself, to "fix" the compilation errors in Eclipse. It would make your webapplication tied to a specific server and thus completely unportable.

function validate()
{
  var a=documents.forms["yourformname"]["yourpasswordfieldname"].value;
  var b=documents.forms["yourformname"]["yourconfirmpasswordfieldname"].value;
  if(!(a==b))
  {
    alert("both passwords are not matching");
    return false;
  }
  return true;
}

I can't really say for sure, but I'd guess it's mostly historical. Quite a few early C compilers didn't support floating point at all. It was added on later, and even then not as completely -- mostly the data type was added, and the most primitive operations supported in the language, but everything else left to the standard library.

Why you should care what I say in spite of there being a 250+ upvote answer

It's not that 0 = true and 1 = false. It is: zero means no failure (success) and non-zero means failure (of type N).

While the selected answer is technically "true" please do not put return 1** in your code for false. It will have several unfortunate side effects.

1. Experienced developers will spot you as an amateur (for the reason below).
2. Experienced developers don't do this (for all the reasons below).
3. It is error prone.
   • Even experienced developers can mistake 0 and 1 as false and true respectively (for the reason above).
4. It requires (or will encourage) extraneous and ridiculous comments.
5. It's actually less helpful than implicit return statuses.

Learn some bash

The bash manual says (emphasis mine)

return [n]

Cause a shell function to stop executing and return the value n to its caller. If n is not supplied, the return value is the exit status of the last command executed in the function.

Therefore, we don't have to EVER use 0 and 1 to indicate True and False. The fact that they do so is essentially trivial knowledge useful only for debugging code, interview questions, and blowing the minds of newbies.

The bash manual also says

otherwise the function’s return status is the exit status of the last command executed

The bash manual also says

($?) Expands to the exit status of the most recently executed foreground pipeline.

Whoa, wait. Pipeline? Let's turn to the bash manual one more time.

A pipeline is a sequence of one or more commands separated by one of the control operators ‘|’ or ‘|&’.

Yes. They said 1 command is a pipeline. Therefore, all 3 of those quotes are saying the same thing.

• $? tells you what happened last.
• It bubbles up.

My answer

So, while @Kambus demonstrated that with such a simple function, no return is needed at all. I think was unrealistically simple compared to the needs of most people who will read this.

Why return?

If a function is going to return its last command's exit status, why use return at all? Because it causes a function to stop executing.

Stop execution under multiple conditions

01  function i_should(){
02      uname="$(uname -a)"
03
04      [[ "$uname" =~ Darwin ]] && return
05
06      if [[ "$uname" =~ Ubuntu ]]; then
07          release="$(lsb_release -a)"
08          [[ "$release" =~ LTS ]]
09          return
10      fi
11
12      false
13  }
14
15  function do_it(){
16      echo "Hello, old friend."
17  }
18
19  if i_should; then
20    do_it
21  fi

What we have here is...

Line 04 is an explicit[-ish] return true because the RHS of && only gets executed if the LHS was true

Line 09 returns either true or false matching the status of line 08

Line 13 returns false because of line 12

(Yes, this can be golfed down, but the entire example is contrived.)

Another common pattern

# Instead of doing this...
some_command
if [[ $? -eq 1 ]]; then
    echo "some_command failed"
fi

# Do this...
some_command
status=$?
if ! $(exit $status); then
    echo "some_command failed"
fi

Notice how setting a status variable demystifies the meaning of $?. (Of course you know what $? means, but someone less knowledgeable than you will have to Google it some day. Unless your code is doing high frequency trading, show some love, set the variable.) But the real take-away is that "if not exist status" or conversely "if exit status" can be read out loud and explain their meaning. However, that last one may be a bit too ambitious because seeing the word exit might make you think it is exiting the script, when in reality it is exiting the $(...) subshell.

** If you absolutely insist on using return 1 for false, I suggest you at least use return 255 instead. This will cause your future self, or any other developer who must maintain your code to question "why is that 255?" Then they will at least be paying attention and have a better chance of avoiding a mistake.

Use:

.content {
    background: url('http://www.gransebryan.com/wp-content/uploads/2016/03/bryan-ganzon-granse-who.png') center no-repeat;
 }

.displaybg {
   text-align: center;
   color: #FFF;
}

Related information, especially if you are using NTVS for working with the Visual Studio IDE. The NTVS adds both NodeJS and Express tools, scaffolding, project templates to Visual Studio 2012, 2013.

Also, the verbiage that calls ExpressJS or Connect as a "WebServer" is incorrect. You can create a basic WebServer with or without them. A basic NodeJS program can also use the http module to handle http requests, Thus becoming a rudimentary web server.

values timestampdiff (16, char( 
    timestamp(current timestamp + 1 year + 2 month - 3 day)- 
    timestamp(current timestamp)))
1
=
422



values timestampdiff (16, char( 
    timestamp('2012-03-08-00.00.00')- 
    timestamp('2011-12-08-00.00.00')))
1
=
90

---------- EDIT BY galador

SELECT TIMESTAMPDIFF(16, CHAR(CURRENT TIMESTAMP - TIMESTAMP_FORMAT(CHDLM, 'YYYYMMDD'))
FROM CHCART00
WHERE CHSTAT = '05'

EDIT

As it has been pointed out by X-Zero, this function returns only an estimate. This is true. For accurate results I would use the following to get the difference in days between two dates a and b:

SELECT days (current date) - days (date(TIMESTAMP_FORMAT(CHDLM, 'YYYYMMDD')))
FROM CHCART00 
WHERE CHSTAT = '05';

I ran into similar problems running with ORMLite from a web application. I initially got stuck on the syntax to use server mode in the url. The answers above helped with that. Then I had the similar user/password error which was easier to figure out. I did not have to shut anything down or erase any files. The following code worked:

protected ConnectionSource getConnectionSource() throws SQLException {
    String databaseUrl = "jdbc:h2:tcp://localhost/~/test";
    return new JdbcConnectionSource(databaseUrl,"sa","sa");
}

To use H2 in server mode on wildfly, I Modifed connection-url in standalone.xml

<datasource jndi-name="java:jboss/datasources/ExampleDS" pool- name="ExampleDS" enabled="true" use-java-context="true">
     <connection-url>jdbc:h2:tcp://localhost/~/test</connection-url>
               …
</datasource>

EDIT

I think the reason that your table is not responsive to start with was you did not wrap in .container, .row and .col-md-x classes like this one

<div class="container">
   <div class="row">
     <div class="col-md-12">
     <!-- or use any other number .col-md- -->
         <div class="table-responsive">
             <div class="table">
             </div>
         </div>
     </div>
   </div>
</div>

With this, you can still use <p> tags and even make it responsive.

Please see the Bootply example here

Even simpler, use _.values from underscore.js https://underscorejs.org/#values

I also had an issue where git hangs on the "Writing objects" part on Windows 7 (using msysgit, the default windows client from git) and this is the first hit I got in google, so I will also post my answer here.

git config --global core.askpass "git-gui--askpass" did not work unfotunately, but after some researching I found the tip on Git push halts on "Writing Objects: 100%" to use git config –global sendpack.sideband false which worked perfectly.

I can finally push from the commandline again!

In order to run the bootstrap date time picker you need to include Moment.js as well. Here is the working code sample in your case.

<!DOCTYPE html>_x000D_
    <html lang="en">_x000D_
    <head>_x000D_
      <meta charset="utf-8">_x000D_
      <meta name="viewport" content="width=device-width, initial-scale=1">_x000D_
      <link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css">_x000D_
      <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.12.4/jquery.min.js"></script>_x000D_
      <script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js"></script>_x000D_
    _x000D_
    _x000D_
      <!-- <link rel="stylesheet" type="text/css" href="css/bootstrap-datetimepicker.css"> -->_x000D_
      <script type="text/javascript" src="https://cdnjs.cloudflare.com/ajax/libs/moment.js/2.15.1/moment.min.js"></script>_x000D_
      <link rel="stylesheet" type="text/css" href="https://cdnjs.cloudflare.com/ajax/libs/bootstrap-datetimepicker/4.17.43/css/bootstrap-datetimepicker.min.css"> _x000D_
      <link rel="stylesheet" type="text/css" href="https://cdnjs.cloudflare.com/ajax/libs/bootstrap-datetimepicker/4.17.43/css/bootstrap-datetimepicker-standalone.css"> _x000D_
      <script type="text/javascript" src="https://cdnjs.cloudflare.com/ajax/libs/bootstrap-datetimepicker/4.17.43/js/bootstrap-datetimepicker.min.js"></script>_x000D_
    _x000D_
    </head>_x000D_
    _x000D_
    _x000D_
    <body>_x000D_
    _x000D_
       <div class="container">_x000D_
          <div class="row">_x000D_
            <div class='col-sm-6'>_x000D_
                <div class="form-group">_x000D_
                    <div class='input-group date' id='datetimepicker1'>_x000D_
                        <input type='text' class="form-control" />_x000D_
                        <span class="input-group-addon">_x000D_
                            <span class="glyphicon glyphicon-calendar"></span>_x000D_
                        </span>_x000D_
                    </div>_x000D_
                </div>_x000D_
            </div>_x000D_
            <script type="text/javascript">_x000D_
                $(function () {_x000D_
                    $('#datetimepicker1').datetimepicker();_x000D_
                });_x000D_
            </script>_x000D_
          </div>_x000D_
       </div>_x000D_
    _x000D_
    _x000D_
    </body>_x000D_
    </html>

In our code we have a specific validator inherited from the BaseValidator class.

This class does the following:

1. Validates the e-mail address against a regular expression.
2. Does a lookup on the MX record for the domain to make sure there is at least a server to deliver to.

This is the closest you can get to validation without actually sending the person an e-mail confirmation link.

You have a character = STQ8QGpaM4CU6149665!7084880820, and you have a another column = 7084880820.

If you want to get only this in excel using the formula: STQ8QGpaM4CU6149665!, use this:

=REPLACE(H11,SEARCH(J11,H11),LEN(J11),"")

H11 is an old character and for starting number use search option then for no of character needs to replace use len option then replace to new character. I am replacing this to blank.

I've come to the conclusion the best way to get the number of jobs on a queue is to use rabbitmqctl as has been suggested several times here. To allow any chosen user to run the command with sudo I followed the instructions here (I did skip editing the profile part as I don't mind typing in sudo before the command.)

I also grabbed jamesc's grep and cut snippet and wrapped it up in subprocess calls.

from subprocess import Popen, PIPE
p1 = Popen(["sudo", "rabbitmqctl", "list_queues", "-p", "[name of your virtula host"], stdout=PIPE)
p2 = Popen(["grep", "-e", "^celery\s"], stdin=p1.stdout, stdout=PIPE)
p3 = Popen(["cut", "-f2"], stdin=p2.stdout, stdout=PIPE)
p1.stdout.close()
p2.stdout.close()
print("number of jobs on queue: %i" % int(p3.communicate()[0]))

hasOwnProperty() is a nice property to validate object keys. Example:

var obj = {a:1, b:2};

obj.hasOwnProperty('a') // true

Just ran into this problem. I don't know if it's the same thing that hit your code, but for me the root cause was because I forgot to put name= on the last argument of the url (or path in Django 2.0+) function call.

For instance, the following functions throw the error from the question:

url(r'^foo/(?P<bar>[A-Za-z]+)/$', views.FooBar.as_view(), 'foo')
path('foo/{slug:bar}/', views.FooBar, 'foo')

But these actually work:

url(r'^foo/(?P<bar>[A-Za-z]+)/$', views.FooBar.as_view(), name='foo')
path('foo/{slug:bar}/', views.FooBar, name='foo')

The reason why the traceback is unhelpful is because internally, Django wants to parse the given positional argument as the keyword argument kwargs, and since a string is an iterable, an atypical code path begins to unfold. Always use name= on your urls!

Typical implementation:

import subprocess

p = subprocess.Popen('ls', shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
for line in p.stdout.readlines():
    print line,
retval = p.wait()

You are free to do what you want with the stdout data in the pipe. In fact, you can simply omit those parameters (stdout= and stderr=) and it'll behave like os.system().

The .spec.ts files are for unit tests for individual components. You can run Karma task runner through ng test. In order to see code coverage of unit test cases for particular components run ng test --code-coverage

You can use DocToc to generate the table of contents from command line with:

doctoc /path/to/file

To make links compatible with anchors generated by Bitbucket, run it with the --bitbucket argument.

Summary

SQL Server won't let you insert an explicit value in an identity column unless you use a column list. Thus, you have the following options:

1. Make a column list (either manually or using tools, see below)

OR

2. make the identity column in tbl_A_archive a regular, non-identity column: If your table is an archive table and you always specify an explicit value for the identity column, why do you even need an identity column? Just use a regular int instead.

Details on Solution 1

Instead of

SET IDENTITY_INSERT archive_table ON;

INSERT INTO archive_table
  SELECT *
  FROM source_table;

SET IDENTITY_INSERT archive_table OFF;

you need to write

SET IDENTITY_INSERT archive_table ON;

INSERT INTO archive_table (field1, field2, ...)
  SELECT field1, field2, ...
  FROM source_table;

SET IDENTITY_INSERT archive_table OFF;

with field1, field2, ... containing the names of all columns in your tables. If you want to auto-generate that list of columns, have a look at Dave's answer or Andomar's answer.

Details on Solution 2

Unfortunately, it is not possible to just "change the type" of an identity int column to a non-identity int column. Basically, you have the following options:

• If the archive table does not contain data yet, drop the column and add a new one without identity.

OR

• Use SQL Server Management Studio to set the Identity Specification/(Is Identity) property of the identity column in your archive table to No. Behind the scenes, this will create a script to re-create the table and copy existing data, so, to do that, you will also need to unset Tools/Options/Designers/Table and Database Designers/Prevent saving changes that require table re-creation.

OR

• Use one of the workarounds described in this answer: Remove Identity from a column in a table

Can do, with jQuery:

$(document).ready(function() {
    $('.mandatory').each(function() {
        $(this).attr('title', $(this).attr('class'));
    });
});

As already said, on runtime there is no difference (in the class file it is always fully qualified, and after loading and linking the class there are direct pointers to the referred method), and everything in the java.lang package is automatically imported, as is everything in the current package.

The compiler might have to search some microseconds longer, but this should not be a reason - decide for legibility for human readers.

By the way, if you are using lots of static methods (from Math, for example), you could also write

import static java.lang.Math.*;

and then use

sqrt(x)

directly. But only do this if your class is math heavy and it really helps legibility of bigger formulas, since the reader (as the compiler) first would search in the same class and maybe in superclasses, too. (This applies analogously for other static methods and static variables (or constants), too.)

Here's an example of a union from my own codebase (from memory and paraphrased so it may not be exact). It was used to store language elements in an interpreter I built. For example, the following code:

set a to b times 7.

consists of the following language elements:

• symbol[set]
• variable[a]
• symbol[to]
• variable[b]
• symbol[times]
• constant[7]
• symbol[.]

Language elements were defines as '#define' values thus:

#define ELEM_SYM_SET        0
#define ELEM_SYM_TO         1
#define ELEM_SYM_TIMES      2
#define ELEM_SYM_FULLSTOP   3
#define ELEM_VARIABLE     100
#define ELEM_CONSTANT     101

and the following structure was used to store each element:

typedef struct {
    int typ;
    union {
        char *str;
        int   val;
    }
} tElem;

then the size of each element was the size of the maximum union (4 bytes for the typ and 4 bytes for the union, though those are typical values, the actual sizes depend on the implementation).

In order to create a "set" element, you would use:

tElem e;
e.typ = ELEM_SYM_SET;

In order to create a "variable[b]" element, you would use:

tElem e;
e.typ = ELEM_VARIABLE;
e.str = strdup ("b");   // make sure you free this later

In order to create a "constant[7]" element, you would use:

tElem e;
e.typ = ELEM_CONSTANT;
e.val = 7;

and you could easily expand it to include floats (float flt) or rationals (struct ratnl {int num; int denom;}) and other types.

The basic premise is that the str and val are not contiguous in memory, they actually overlap, so it's a way of getting a different view on the same block of memory, illustrated here, where the structure is based at memory location 0x1010 and integers and pointers are both 4 bytes:

       +-----------+
0x1010 |           |
0x1011 |    typ    |
0x1012 |           |
0x1013 |           |
       +-----+-----+
0x1014 |     |     |
0x1015 | str | val |
0x1016 |     |     |
0x1017 |     |     |
       +-----+-----+

If it were just in a structure, it would look like this:

       +-------+
0x1010 |       |
0x1011 |  typ  |
0x1012 |       |
0x1013 |       |
       +-------+
0x1014 |       |
0x1015 |  str  |
0x1016 |       |
0x1017 |       |
       +-------+
0x1018 |       |
0x1019 |  val  |
0x101A |       |
0x101B |       |
       +-------+

DataView view = new DataView();
view.Table = DataSet1.Tables["Suppliers"];
view.RowFilter = "City = 'Berlin'";
view.RowStateFilter = DataViewRowState.ModifiedCurrent;
view.Sort = "CompanyName DESC";

// Simple-bind to a TextBox control
Text1.DataBindings.Add("Text", view, "CompanyName");

Ref: http://www.csharp-examples.net/dataview-rowfilter/

http://msdn.microsoft.com/en-us/library/system.data.dataview.rowfilter.aspx

In UTF-32 all of characters are coded with 32 bits. The advantage is that you can easily calculate the length of the string. The disadvantage is that for each ASCII characters you waste an extra three bytes.

In UTF-8 characters have variable length, ASCII characters are coded in one byte (eight bits), most western special characters are coded either in two bytes or three bytes (for example € is three bytes), and more exotic characters can take up to four bytes. Clear disadvantage is, that a priori you cannot calculate string's length. But it's takes lot less bytes to code Latin (English) alphabet text, compared to UTF-32.

UTF-16 is also variable length. Characters are coded either in two bytes or four bytes. I really don't see the point. It has disadvantage of being variable length, but hasn't got the advantage of saving as much space as UTF-8.

Of those three, clearly UTF-8 is the most widely spread.

On Mac OS X, the way I enabled Jenkins to pull from my (private) Github repo is:

First, ensure that your user owns the Jenkins directory

sudo chown -R me:me /Users/Shared/Jenkins

Then edit the LaunchDaemon plist for Jenkins (at /Library/LaunchDaemons/org.jenkins-ci.plist) so that your user is the GroupName and the UserName:

    <key>GroupName</key>
    <string>me</string>
...
    <key>UserName</key>
    <string>me</string>

Then reload Jenkins:

sudo launchctl unload -w /Library/LaunchDaemons/org.jenkins-ci.plist
sudo launchctl load -w /Library/LaunchDaemons/org.jenkins-ci.plist

Then Jenkins, since it's running as you, has access to your ~/.ssh directory which has your keys.

You can't unfortunately. The only way is to simulate this with a window.open call.

While an approach proposed above (@chookoos, here in this q&a convert to Excel workbook) and import resolves those kinds of issues, this solution this solution in another q&a is excellent because you can stay with your csv or tsv or txt file, and perfom the necessary fine tuning without creating a Microsoft product related solution

Bootstrap 4 has many different ways to align navbar items. float-right won't work because the navbar is now flexbox.

You can use mr-auto for auto right margin on the 1st (left) navbar-nav. Alternatively, ml-auto could be used on the 2nd (right) navbar-nav , or if you just have a single navbar-nav.

<nav class="navbar navbar-expand-md navbar-light bg-light">
    <a class="navbar-brand" href="#">Navbar</a>
    <button class="navbar-toggler" type="button" data-toggle="collapse" data-target="#navbarNav">
        <span class="navbar-toggler-icon"></span>
    </button>
    <div class="collapse navbar-collapse" id="navbarNav">
        <ul class="navbar-nav mr-auto">
            <li class="nav-item active">
                <a class="nav-link" href="#">Home <span class="sr-only">(current)</span></a>
            </li>
            <li class="nav-item">
                <a class="nav-link" href="#">Features</a>
            </li>
            <li class="nav-item">
                <a class="nav-link" href="#">Pricing</a>
            </li>
        </ul>
        <ul class="navbar-nav">
            <li class="nav-item">
                <a class="nav-link" href="#">Login</a>
            </li>
            <li class="nav-item">
                <a class="nav-link" href="#">Register</a>
            </li>
        </ul>
    </div>
</nav>

https://codeply.com/go/P0G393rzfm

There are also flexbox utils. For example use justify-content-end on the collapse menu:

<nav class="navbar navbar-expand-lg navbar-dark bg-dark">
  <div class="container-fluid">
    <a class="navbar-brand" href="#">Brand</a>
    <button class="navbar-toggler" type="button" data-bs-toggle="collapse" data-bs-target="#navbarNav">
      <span class="navbar-toggler-icon"></span>
    </button>
    <div class="collapse navbar-collapse justify-content-end" id="navbarNav">
      <ul class="navbar-nav">
        <li class="nav-item">
          <a class="nav-link active" aria-current="page" href="#">Contact</a>
        </li>
        <li class="nav-item">
          <a class="nav-link" href="#">Pricing</a>
        </li>
        <li class="nav-item">
          <a class="nav-link" href="#">Download</a>
        </li>
      </ul>
    </div>
  </div>
</nav>

Or when you have 2 navbar-navs, use justify-content-between in navbar-collapse would work to even the space between the navbar-navs:

 <div class="navbar-collapse collapse justify-content-between">
     <ul class="navbar-nav mr-auto">
               ..
     </ul>
     <ul class="navbar-nav">
           ..
     </ul>
 </div>

Update for Bootstrap 4.0 and newer

As of Bootstrap 4 beta, ml-auto will still work to push items to the right. Just be aware the the navbar-toggleable- classes have changed to navbar-expand-*

Updated navbar right for Bootstrap 4

Another frequent Bootstrap 4 Navbar right alignment scenario includes a button on the right that remains outside the mobile collapse nav so that it is always shown at all widths.

Right align button that is always visible

Related: Bootstrap NavBar with left, center or right aligned items

Update for Bootstrap 5 (see this question). ml-auto has been replaced with ms-auto to represent start instead of left.

For ExpressJs router:

router.post('/login', async(req, res) => {
    return res.send({redirect: '/yoururl'});
})

Client-side:

    success: function (response) {
        if (response.redirect) {
            window.location = response.redirect
        }
    },

After= dependency is only effective when service including After= and service included by After= are both scheduled to start as part of your boot up.

Ex:

a.service
[Unit]
After=b.service

This way, if both a.service and b.service are enabled, then systemd will order b.service after a.service.

If I am not misunderstanding, what you are asking is how to start b.service when a.service starts even though b.service is not enabled.

The directive for this is Wants= or Requires= under [Unit].

website.service
[Unit]
Wants=mongodb.service
After=mongodb.service

The difference between Wants= and Requires= is that with Requires=, a failure to start b.service will cause the startup of a.service to fail, whereas with Wants=, a.service will start even if b.service fails. This is explained in detail on the man page of .unit.

your markup was a bit messed up. Here's the styles you need and proper html

CSS:

.navbar-brand,
.navbar-nav li a {
    line-height: 150px;
    height: 150px;
    padding-top: 0;
}

HTML:

<nav class="navbar navbar-default">
    <div class="navbar-header">
        <button type="button" class="navbar-toggle" data-toggle="collapse" data-target="#bs-example-navbar-collapse-1">
            <span class="sr-only">Toggle navigation</span>
            <span class="icon-bar"></span>
            <span class="icon-bar"></span>
            <span class="icon-bar"></span>
        </button>

        <a class="navbar-brand" href="#"><img src="img/logo.png" /></a>
    </div>

    <div class="collapse navbar-collapse">
        <ul class="nav navbar-nav">
            <li><a href="">Portfolio</a></li>
            <li><a href="">Blog</a></li>
            <li><a href="">Contact</a></li>
        </ul>
    </div>
</nav>

Or check out the fiddle at: http://jsfiddle.net/TP5V8/1/

update addresses set cid=id where id in (select id from customers)

Java (and any other programming language) is modeled in terms of types and values. At the theoretical level, a value is a representation for some quantum of information, and a type is a set of values. When we say value X is an instance of type Y, we are simply saying that X is a member of the set of values that is the type Y.

So that's what the term "instance" really means: it describes a relationship not a thing.

The type system of the Java programming language supports two kinds of types, primitive types and reference types. The reference types are further divided into the classes and array types. A Java object is an instance of a reference type.

An object is a class instance or an array. (JLS 4.3.1)

That's the type theoretic view.

In practice, most Java developers treat the words "instance" and "object" as synonyms. (And that includes me then I'm trying to explain something quickly.) And most developers use the word "value" rather than "instance" to refer to an instance of a primitive type.

I wrote a directive you can use to bind an ng-model to any expression you want. Whenever the expression changes the model is set to the new value.

 module.directive('boundModel', function() {
      return {
        require: 'ngModel',
        link: function(scope, elem, attrs, ngModel) {
          var boundModel$watcher = scope.$watch(attrs.boundModel, function(newValue, oldValue) {
            if(newValue != oldValue) {
              ngModel.$setViewValue(newValue);
              ngModel.$render();
            }
          });

          // When $destroy is fired stop watching the change.
          // If you don't, and you come back on your state
          // you'll have two watcher watching the same properties
          scope.$on('$destroy', function() {
              boundModel$watcher();
          });
        }
    });

You can use it in your templates like this:

 <li>Total<input type="text" ng-model="total" bound-model="one * two"></li>      

I also met this problem just now and solved it in this way. So I recorded it here, and I wish it be useful for others.

Scenario:

1. Before I commit the code, revision: 100
2. (Someone else commits the code... revision increased to 199)
3. I (forgot to run "svn up", ) commit the code, now my revision: 200
4. I run "svn up".

The error occurred.

Solution:

1. $ mv current_copy copy_back # Rename the current code copy
2. $ svn checkout current_copy # Check it out again
3. $ cp copy_back/ current_copy # Restore your modifications

Save the following into a file with ".reg" suffix:

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Console\%SystemRoot%_system32_cmd.exe]
"CodePage"=dword:0000fde9

Double click this file, and regedit will import it.

It basically sets the key HKEY_CURRENT_USER\Console\%SystemRoot%_system32_cmd.exe\CodePage to 0xfde9 (65001 in decimal system).

Last time I checked, Java is not capable of natively doing what you want; you have to use 'work-arounds' to get around such limitations. As far as I see it, interfaces ARE an alternative, but not a good alternative. Perhaps whoever told you that was meaning something like this:

public interface ComponentMethod {
  public abstract void PerfromMethod(Container c);
}

public class ChangeColor implements ComponentMethod {
  @Override
  public void PerfromMethod(Container c) {
    // do color change stuff
  }
}

public class ChangeSize implements ComponentMethod {
  @Override
  public void PerfromMethod(Container c) {
    // do color change stuff
  }
}

public void setAllComponents(Component[] myComponentArray, ComponentMethod myMethod) {
    for (Component leaf : myComponentArray) {
        if (leaf instanceof Container) { //recursive call if Container
            Container node = (Container) leaf;
            setAllComponents(node.getComponents(), myMethod);
        } //end if node
        myMethod.PerfromMethod(leaf);
    } //end looping through components
}

Which you'd then invoke with:

setAllComponents(this.getComponents(), new ChangeColor());
setAllComponents(this.getComponents(), new ChangeSize());

On Windows:

You can create a shortcut executing

Anaconda3\pythonw.exe Anaconda3\cwp.py Anaconda3\envs\<your_env> Anaconda3\envs\<your env>\pythonw.exe Anaconda3\envs\<your_env>\Scripts\spyder-script.py

However, if you started spyder from your venv inside Anaconda shell, it creates this shortcut for you automatically in the Windows menu. The steps:

1. install spyder in your venv using the methods mentioned in the other answers here.

2. (in anaconda:) activate testenv

3. Look up the windows menu "recently added" or just search for "spyder" in the windows menu, find spyder (testenv) and

• [add that to taskbar] and / or

• [look up the file source location] and copy that to your desktop, e.g. from C:\Users\USER\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Anaconda3 (64-bit), where the spyder links for any of my environments can be found.

Now you can directly start spyder from a shortcut without the need to open anaconda prompt.

The has_many :choices creates an association named choices, not choice. Try using current_user.choices instead.

See the ActiveRecord::Associations documentation for information about about the has_many magic.

Check this out using Set and ES6 filter.

  let result = arrayOfObjects.filter( el => (-1 == listToDelete.indexOf(el.id)) );
  console.log(result);

Here is JsFiddle: https://jsfiddle.net/jsq0a0p1/1/

Nice question, a while ago I've experimented a bit with this, but haven't used it a lot because it's still not bulletproof. I divided the plot area into a 32x32 grid and calculated a 'potential field' for the best position of a label for each line according the following rules:

• white space is a good place for a label
• Label should be near corresponding line
• Label should be away from the other lines

The code was something like this:

import matplotlib.pyplot as plt
import numpy as np
from scipy import ndimage


def my_legend(axis = None):

    if axis == None:
        axis = plt.gca()

    N = 32
    Nlines = len(axis.lines)
    print Nlines

    xmin, xmax = axis.get_xlim()
    ymin, ymax = axis.get_ylim()

    # the 'point of presence' matrix
    pop = np.zeros((Nlines, N, N), dtype=np.float)    

    for l in range(Nlines):
        # get xy data and scale it to the NxN squares
        xy = axis.lines[l].get_xydata()
        xy = (xy - [xmin,ymin]) / ([xmax-xmin, ymax-ymin]) * N
        xy = xy.astype(np.int32)
        # mask stuff outside plot        
        mask = (xy[:,0] >= 0) & (xy[:,0] < N) & (xy[:,1] >= 0) & (xy[:,1] < N)
        xy = xy[mask]
        # add to pop
        for p in xy:
            pop[l][tuple(p)] = 1.0

    # find whitespace, nice place for labels
    ws = 1.0 - (np.sum(pop, axis=0) > 0) * 1.0 
    # don't use the borders
    ws[:,0]   = 0
    ws[:,N-1] = 0
    ws[0,:]   = 0  
    ws[N-1,:] = 0  

    # blur the pop's
    for l in range(Nlines):
        pop[l] = ndimage.gaussian_filter(pop[l], sigma=N/5)

    for l in range(Nlines):
        # positive weights for current line, negative weight for others....
        w = -0.3 * np.ones(Nlines, dtype=np.float)
        w[l] = 0.5

        # calculate a field         
        p = ws + np.sum(w[:, np.newaxis, np.newaxis] * pop, axis=0)
        plt.figure()
        plt.imshow(p, interpolation='nearest')
        plt.title(axis.lines[l].get_label())

        pos = np.argmax(p)  # note, argmax flattens the array first 
        best_x, best_y =  (pos / N, pos % N) 
        x = xmin + (xmax-xmin) * best_x / N       
        y = ymin + (ymax-ymin) * best_y / N       


        axis.text(x, y, axis.lines[l].get_label(), 
                  horizontalalignment='center',
                  verticalalignment='center')


plt.close('all')

x = np.linspace(0, 1, 101)
y1 = np.sin(x * np.pi / 2)
y2 = np.cos(x * np.pi / 2)
y3 = x * x
plt.plot(x, y1, 'b', label='blue')
plt.plot(x, y2, 'r', label='red')
plt.plot(x, y3, 'g', label='green')
my_legend()
plt.show()

And the resulting plot:

Strings in C are represented as arrays of characters.

char *p = "String";

You are declaring a pointer that points to a string stored some where in your program (modifying this string is undefined behavior) according to the C programming language 2 ed.

char p2[] = "String";

You are declaring an array of char initialized with the string "String" leaving to the compiler the job to count the size of the array.

char p3[5] = "String";

You are declaring an array of size 5 and initializing it with "String". This is an error be cause "String" don't fit in 5 elements.

char p3[7] = "String"; is the correct declaration ('\0' is the terminating character in c strings).

http://c-faq.com/~scs/cclass/notes/sx8.html

cursor:url('http://www.javascriptkit.com/dhtmltutors/cursor-hand.gif'), auto

NOTE 1: In some cases you should consider setting the offset (anchor):

cursor:url(http://www.javascriptkit.com/dhtmltutors/cursor-hand.gif) 10 3, auto;

in this exmple, we set offsetx to 10 and offsety to 3 (from top left), so the pointer finger will be anchor. fiddle: http://jsfiddle.net/5kxt1j98/ (you can see the difference by moving cursor to top left of container)

NOTE 2: THE MAX CURSOR SIZE IS 128*128, recommended one is below 32*32.

Well Create a class extending Service ,this service will contain your Location listener class(Fused Location Provider) purpose of this service is to get location periodically , something like this

  public class LocationGetter extends Service {


    ......

    public class MyLocationListener implements GooglePlayServicesClient.ConnectionCallbacks,GooglePlayServicesClient.OnConnectionFailedListener,LocationListener, com.google.android.gms.location.LocationListener {

   //your fused Location provider code

    }

    ......

}

Then create a class extending Broadcast Receiver , such that the purpose of this broadcast Receiver is to check whether service is alive if not restart service even during phone ON/OFF ....

register receiver in ur activity , listen for broadcasts , unregeister receiver depending ur need...

I'm not sure if this is a good solution but it removed the error. I commented out the line:

from numpy._distributor_init import NUMPY_MKL 

and it worked. Not sure if this will cause other features to break though

If browser supports iframe, then DOM inside iframe come from src attribute of respective tag. Contents that are inside iframe tag are used as a fall back mechanism where browser does not supports iframe tag.

Ref: http://www.w3schools.com/tags/tag_iframe.asp

The exception is raised when you try to call not callable object. Callable objects are (functions, methods, objects with __call__)

>>> f = 1
>>> callable(f)
False
>>> f()
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
TypeError: 'int' object is not callable

You should retrieve RecyclerView in a Fragment after inflating core View using that View. Perhaps it can't find your recycler because it's not part of Activity

@Override
public View onCreateView(LayoutInflater inflater, ViewGroup container,
                             Bundle savedInstanceState) {
    final View view = inflater.inflate(R.layout.fragment_artist_tracks, container, false);
    final FragmentActivity c = getActivity();
    final RecyclerView recyclerView = (RecyclerView) view.findViewById(R.id.recyclerView);
    LinearLayoutManager layoutManager = new LinearLayoutManager(c);
    recyclerView.setLayoutManager(layoutManager);

    new Thread(new Runnable() {
        @Override
        public void run() {
            final RecyclerAdapter adapter = new RecyclerAdapter(c);
            c.runOnUiThread(new Runnable() {
                @Override
                public void run() {
                    recyclerView.setAdapter(adapter);
                }
            });
        }
    }).start();

    return view;
}

Once a dom element is created, the tag is immutable, I believe. You'd have to do something like this:

$(this).replaceWith($('<h5>' + this.innerHTML + '</h5>'));

Set a https://mitmproxy.org/ as proxy on a same LAN

• Open Source
• Built in python 3
• Installable via pip

In Ghost4J library (http://ghost4j.sourceforge.net), since version 0.4.0 you can use a SimpleRenderer to do the job with few lines of code:

1. Load PDF or PS file (use PSDocument class for that):

       PDFDocument document = new PDFDocument();
       document.load(new File("input.pdf"));
   

2. Create the renderer

       SimpleRenderer renderer = new SimpleRenderer();
   
       // set resolution (in DPI)
       renderer.setResolution(300);
   

3. Render

       List<Image> images = renderer.render(document);
   

Then you can do what you want with your image objects, for example, you can write them as PNG like this:

            for (int i = 0; i < images.size(); i++) {
                ImageIO.write((RenderedImage) images.get(i), "png", new File((i + 1) + ".png"));
            }

Note: Ghost4J uses the native Ghostscript C API so you need to have a Ghostscript installed on your box.

I hope it will help you :)

I recommend using:

#!/bin/bash

It's not 100% portable (some systems place bash in a location other than /bin), but the fact that a lot of existing scripts use #!/bin/bash pressures various operating systems to make /bin/bash at least a symlink to the main location.

The alternative of:

#!/usr/bin/env bash

has been suggested -- but there's no guarantee that the env command is in /usr/bin (and I've used systems where it isn't). Furthermore, this form will use the first instance of bash in the current users $PATH, which might not be a suitable version of the bash shell.

(But /usr/bin/env should work on any reasonably modern system, either because env is in /usr/bin or because the system does something to make it work. The system I referred to above was SunOS 4, which I probably haven't used in about 25 years.)

If you need a script to run on a system that doesn't have /bin/bash, you can modify the script to point to the correct location (that's admittedly inconvenient).

I've discussed the tradeoffs in greater depth in my answer to this question.

A somewhat obscure update: One system I use, Termux, a desktop-Linux-like layer that runs under Android, doesn't have /bin/bash (bash is /data/data/com.termux/files/usr/bin/bash) -- but it has special handling to support #!/bin/bash.

<script>
$(function() {
    $("#client").on("change", function() {
      var clientid=$("#client").val();
     //show the loading div here
    $.ajax({
            type:"post",
            url:"clientnetworkpricelist/yourfile.php",
        data:"title="+clientid,
        success:function(data){
             $("#result").html(data);
          //hide the loading div here
        }
    }); 
    });
});
</script>

Or you can also do this:

$(document).ajaxStart(function() {
        // show loader on start
        $("#loader").css("display","block");
    }).ajaxSuccess(function() {
        // hide loader on success
        $("#loader").css("display","none");
    });

In this course(https://www.codeschool.com/courses/shaping-up-with-angular-js) they explain how to use "this" and many other stuff.

If you add method to the controller through "this" method, you have to call it in the view with controller's name "dot" your property or method.

For example using your controller in the view you may have code like this:

    <div data-ng-controller="YourController as aliasOfYourController">

       Your first pane is {{aliasOfYourController.panes[0]}}

    </div>

I would recommend EditArea for live editing of a syntax hightlighted textarea.

Code and explanation from Pointer Basics:

The dereference operation starts at the pointer and follows its arrow over to access its pointee. The goal may be to look at the pointee state or to change the pointee state. The dereference operation on a pointer only works if the pointer has a pointee -- the pointee must be allocated and the pointer must be set to point to it. The most common error in pointer code is forgetting to set up the pointee. The most common runtime crash because of that error in the code is a failed dereference operation. In Java the incorrect dereference will be flagged politely by the runtime system. In compiled languages such as C, C++, and Pascal, the incorrect dereference will sometimes crash, and other times corrupt memory in some subtle, random way. Pointer bugs in compiled languages can be difficult to track down for this reason.

void main() {   
    int*    x;  // Allocate the pointer x
    x = malloc(sizeof(int));    // Allocate an int pointee,
                            // and set x to point to it
    *x = 42;    // Dereference x to store 42 in its pointee   
}

~dp0 : d=drive, p=path, %0=full path\name of this batch-file.

cd /d %~dp0 will change the path to the same, where the batch file resides.

See for /? or call / for more details about the %~... modifiers.
See cd /? about the /d switch.

If using Visual Studio Code** with Kotlin extension, go to the plugin management Crtl + Shift + x, type kotlin and click on manage (the little gear) >> Configure Extension Settings

on Kotlin >> Compiler >> Jvm:Target - type the java version. In my situation just typed 1.8

And then restart :-)

** vscode or just 'code' for linux

For windows, you need to download the latest version of the open SSL binaries at this time is:

openssl-1.0.2k-x64_86-win64.zip

this problem happened to me when I tried to run MongoDB bin in windows 10

source to download: https://indy.fulgan.com/SSL/

Use BOOST_BINARY (Yes, you can use it in C).

#include <boost/utility/binary.hpp>
...
int bin = BOOST_BINARY(110101);

This macro is expanded to an octal literal during preprocessing.

I believe you can find out Eclipse Platform version for every software product that is Eclipse-based.

1. Open Installation Details:

   • Go to Help => About => Installation Details.
   • Or to Help => Install New Software... => click What is already installed? link.

2. Choose Plug-ins tab => type org.eclipse.platform => check Version column.

3. You can match version code and version name on https://wiki.eclipse.org/Older_Versions_Of_Eclipse

For example, check out GitEye (Git GUI client)

Or checkout DBBeaver (DB manager):

For me this problem was caused by a missing ) at the end of an if statement in a function called by the function the error was reported as from. Try scrolling up in the output to find the first error reported by the compiler. Fixing that error may fix this error.

const arr= [1, 2, 3]
arr.forEach(function(element){
 if(arr[arr.length-1] === element){
  console.log("Last Element")
 }
})

Is test.rtf located in the same directory you're in when you run this?

If not, you'll need to provide the full path to that file.

Suppose it's located in

/Users/AshleyStallings/Documents/School Work/Computer Programming/Side Projects/data

In that case you'd enter

data/test.rtf

as your file name

Or it could be in

/Users/AshleyStallings/Documents/School Work/Computer Programming/some_other_folder

In that case you'd enter

../some_other_folder/test.rtf