All you need is a <clear />
tag. Here's an example:
<configuration>
<system.webServer>
<defaultDocument>
<files>
<clear />
<add value="default.aspx" />
</files>
</defaultDocument>
</system.webServer>
</configuration>
check whether there is a comma at the end.
},
{
name: '???. ??????? ?? ?????. ?3/?',
data: graph_high3,
dataGrouping: {
units: groupingUnits,
groupPixelWidth: 40,
approximation: "average",
enabled: true,
units: [[
'minute',
[1]
]]
}
} // if , - SCRIPT5007
I had the same problem.
Solution:
In my case, there was something wrong with the .NET Core Windows Hosting Bundle installation.
I had that installed and had restarted IIS using ("net stop was /y" and "net start w3svc") after installation, but I would get that 500.19 error with Error Code 0x8007000d and Config Source -1: 0:.
I managed to resolve the issue by repairing the .NET Core Windows Hosting Bundle installation and restarting IIS using the commands I mentioned above.
Hope this helps someone!
I had the same problem after updating my AjaxControlToolkit.dll to the latest version 4.1.7.725 from 4.1.60623.0.
I've searched and came up to this page, but none of the answers help me.
After looking to the sample website of the Ajax Control Toolkit that is in the CodePlex zip file, I have realized that the <asp:ScriptManager>
replaced by the new <ajaxtoolkit:ToolkitScriptManager>
. I did so and there is no Sys.Extended is undefined any more.
Building of off an earlier example, I think there is a cleaner way of doing this. Create an index.html
file in your project and using Stephen's code from above, just convert it into an HTML doc.
<!DOCTYPE html>
<html>
<base target="_top">
<script>
function onSuccess(url) {
var a = document.createElement("a");
a.href = url;
a.target = "_blank";
window.close = function () {
window.setTimeout(function() {
google.script.host.close();
}, 9);
};
if (document.createEvent) {
var event = document.createEvent("MouseEvents");
if (navigator.userAgent.toLowerCase().indexOf("firefox") > -1) {
window.document.body.append(a);
}
event.initEvent("click", true, true);
a.dispatchEvent(event);
} else {
a.click();
}
close();
}
function onFailure(url) {
var div = document.getElementById('failureContent');
var link = '<a href="' + url + '" target="_blank">Process</a>';
div.innerHtml = "Failure to open automatically: " + link;
}
google.script.run.withSuccessHandler(onSuccess).withFailureHandler(onFailure).getUrl();
</script>
<body>
<div id="failureContent"></div>
</body>
<script>
google.script.host.setHeight(40);
google.script.host.setWidth(410);
</script>
</html>
Then, in your Code.gs
script, you can have something like the following,
function getUrl() {
return 'http://whatever.com';
}
function openUrl() {
var html = HtmlService.createHtmlOutputFromFile("index");
html.setWidth(90).setHeight(1);
var ui = SpreadsheetApp.getUi().showModalDialog(html, "Opening ..." );
}
Use the LEN function to check for null or empty values. You can just use LEN(@SomeVarcharParm) > 0. This will return false if the value is NULL, '', or ' '. This is because LEN(NULL) returns NULL and NULL > 0 returns false. Also, LEN(' ') returns 0. See for yourself run:
SELECT
CASE WHEN NULL > 0 THEN 'NULL > 0 = true' ELSE 'NULL > 0 = false' END,
CASE WHEN LEN(NULL) > 0 THEN 'LEN(NULL) = true' ELSE 'LEN(NULL) = false' END,
CASE WHEN LEN('') > 0 THEN 'LEN('''') > 0 = true' ELSE 'LEN('''') > 0 = false' END,
CASE WHEN LEN(' ') > 0 THEN 'LEN('' '') > 0 = true' ELSE 'LEN('' '') > 0 = false' END,
CASE WHEN LEN(' test ') > 0 THEN 'LEN('' test '') > 0 = true' ELSE 'LEN('' test '') > 0 = false' END
Check the following sample layout file
<ScrollView xmlns:android="http://schemas.android.com/apk/res/android"
android:id="@+id/ScrollView01" android:layout_width="fill_parent"
android:layout_height="fill_parent" android:background="@color/white">
<RelativeLayout android:layout_height="fill_parent"
android:layout_width="fill_parent">
<ImageView android:id="@+id/image1"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:layout_marginLeft="15dip" android:layout_marginTop="15dip"
android:src="@drawable/btn_blank" android:clickable="true" /> </RelativeLayout> </ScrollView>
The shape
attribute for numpy arrays returns the dimensions of the array. If Y
has n
rows and m
columns, then Y.shape
is (n,m)
. So Y.shape[0]
is n
.
In [46]: Y = np.arange(12).reshape(3,4)
In [47]: Y
Out[47]:
array([[ 0, 1, 2, 3],
[ 4, 5, 6, 7],
[ 8, 9, 10, 11]])
In [48]: Y.shape
Out[48]: (3, 4)
In [49]: Y.shape[0]
Out[49]: 3
In Kotlin, you can do this.
val editText1 = findViewById(R.id.editText)
val intNum = editText1.text.toString().toInt()
A simple way :
select * from hockey_stats
where game_date >= '2012-03-11' and game_date <= '2012-05-11'
The webdriver
will wait for a page to load by default via .get()
method.
As you may be looking for some specific element as @user227215 said, you should use WebDriverWait
to wait for an element located in your page:
from selenium import webdriver
from selenium.webdriver.support.ui import WebDriverWait
from selenium.webdriver.support import expected_conditions as EC
from selenium.webdriver.common.by import By
from selenium.common.exceptions import TimeoutException
browser = webdriver.Firefox()
browser.get("url")
delay = 3 # seconds
try:
myElem = WebDriverWait(browser, delay).until(EC.presence_of_element_located((By.ID, 'IdOfMyElement')))
print "Page is ready!"
except TimeoutException:
print "Loading took too much time!"
I have used it for checking alerts. You can use any other type methods to find the locator.
EDIT 1:
I should mention that the webdriver
will wait for a page to load by default. It does not wait for loading inside frames or for ajax requests. It means when you use .get('url')
, your browser will wait until the page is completely loaded and then go to the next command in the code. But when you are posting an ajax request, webdriver
does not wait and it's your responsibility to wait an appropriate amount of time for the page or a part of page to load; so there is a module named expected_conditions
.
use the include is the easiest way as per
http://www.vistax64.com/powershell/168315-get-childitem-filter-files-multiple-extensions.html
Try this:
var date = new Date();
console.log(date instanceof Date && !isNaN(date.valueOf()));
This should return true
.
UPDATED: Added isNaN
check to handle the case commented by Julian H. Lam
For PHPUnit 5.7.27 and PHP 5.6 and to test multiple exceptions in one test, it was important to force the exception testing. Using exception handling alone to assert the instance of Exception will skip testing the situation if no exception occurs.
public function testSomeFunction() {
$e=null;
$targetClassObj= new TargetClass();
try {
$targetClassObj->doSomething();
} catch ( \Exception $e ) {
}
$this->assertInstanceOf(\Exception::class,$e);
$this->assertEquals('Some message',$e->getMessage());
$e=null;
try {
$targetClassObj->doSomethingElse();
} catch ( Exception $e ) {
}
$this->assertInstanceOf(\Exception::class,$e);
$this->assertEquals('Another message',$e->getMessage());
}
This can be done in a generic way and can be very useful when debugging a complex makefile. Following the same technique as described in another answer, you can insert the following into any makefile:
# if the first command line argument is "print"
ifeq ($(firstword $(MAKECMDGOALS)),print)
# take the rest of the arguments as variable names
VAR_NAMES := $(wordlist 2,$(words $(MAKECMDGOALS)),$(MAKECMDGOALS))
# turn them into do-nothing targets
$(eval $(VAR_NAMES):;@:))
# then print them
.PHONY: print
print:
@$(foreach var,$(VAR_NAMES),\
echo '$(var) = $($(var))';)
endif
Then you can just do "make print" to dump the value of any variable:
$ make print CXXFLAGS
CXXFLAGS = -g -Wall
.NET does this for you. In your AssemblyInfo.cs file, set your assembly version to major.minor.* (for example: 1.0.*).
When you build your project the version is auto generated.
The build and revision numbers are generated based on the date, using the unix epoch, I believe. The build is based on the current day, and the revision is based on the number of seconds since midnight.
head
is defined inside the main as follows.
struct Node *head = new Node;
But you are changing the head in addNode()
and initNode()
functions only. The changes are not reflected back on the main.
Make the declaration of the head as global and do not pass it to functions.
The functions should be as follows.
void initNode(int n){
head->x = n;
head->next = NULL;
}
void addNode(int n){
struct Node *NewNode = new Node;
NewNode-> x = n;
NewNode->next = head;
head = NewNode;
}
As Darin says, you can read from the input stream - but I'd avoid relying on all the data being available in a single go. If you're using .NET 4 this is simple:
MemoryStream target = new MemoryStream();
model.File.InputStream.CopyTo(target);
byte[] data = target.ToArray();
It's easy enough to write the equivalent of CopyTo
in .NET 3.5 if you want. The important part is that you read from HttpPostedFileBase.InputStream
.
For efficient purposes you could check whether the stream returned is already a MemoryStream
:
byte[] data;
using (Stream inputStream = model.File.InputStream)
{
MemoryStream memoryStream = inputStream as MemoryStream;
if (memoryStream == null)
{
memoryStream = new MemoryStream();
inputStream.CopyTo(memoryStream);
}
data = memoryStream.ToArray();
}
The col
argument in the plot
function assign colors automatically to a vector of integers. If you convert iris$Species
to numeric, notice you have a vector of 1,2 and 3s So you can apply this as:
plot(iris$Sepal.Length, iris$Sepal.Width, col=as.numeric(iris$Species))
Suppose you want red, blue and green instead of the default colors, then you can simply adjust it:
plot(iris$Sepal.Length, iris$Sepal.Width, col=c('red', 'blue', 'green')[as.numeric(iris$Species)])
You can probably see how to further modify the code above to get any unique combination of colors.
In short, they are equivalent. Let's have a history view:
(1) at first, the function looks like this.
class MySubClass(MySuperClass):
def __init__(self):
MySuperClass.__init__(self)
(2) to make code more abstract (and more portable). A common method to get Super-Class is invented like:
super(<class>, <instance>)
And init function can be:
class MySubClassBetter(MySuperClass):
def __init__(self):
super(MySubClassBetter, self).__init__()
However requiring an explicit passing of both the class and instance break the DRY (Don't Repeat Yourself) rule a bit.
(3) in V3. It is more smart,
super()
is enough in most case. You can refer to http://www.python.org/dev/peps/pep-3135/
NSString *mystr=@"Your string date";
NSCalendar *cal = [NSCalendar currentCalendar];
NSDate *now = [dateFormatter dateFromString:mystr];
Nslog(@"%@",now);
If you want set the format use below code:
NSString *dateString = @"01-02-2010";
NSDateFormatter *dateFormatter = [[NSDateFormatter alloc] init];
// this is important - we set our input date format to match our input string
// if format doesn't match you'll get nil from your string, so be careful
[dateFormatter setDateFormat:@"dd-MM-yyyy"];
NSDate *dateFromString = [[NSDate alloc] init];
// voila!
dateFromString = [dateFormatter dateFromString:dateString];
Nslog(@"%@",[dateFormatter dateFromString:dateString]);
The following works for me:
git diff master:foo foo
In the past, it may have been:
git diff foo master:foo
This method worked for me:
if ("username" in localStorage) {
alert('yes');
} else {
alert('no');
}
JSON.stringify(data).length return string length not Object length, you can use Object.keys.
<% for(var i=0; i < Object.keys(data).length ; i++) {%>
In class A
, set value for key:
let text = "hai"
UserDefaults.standard.setValue(text, forKey: "textValue")
In class B
, get the value for the text using the key which declared in class A
and assign it to respective variable which you need:
var valueOfText = UserDefaults.value(forKey: "textValue")
You should not need to add this back in. This was removed purposefully. The documentation has changed somewhat and the CSS class that is necessary ("nav-stacked") is only mentioned under the pills component, but should work for tabs as well.
This tutorial shows how to use the Bootstrap 3 setup properly to do vertical tabs:
tutsme-webdesign.info/bootstrap-3-toggable-tabs-and-pills
30 minutes is 30 * 60 * 1000
miliseconds. Add that to the current date to specify an expiration date 30 minutes in the future.
var date = new Date();
var minutes = 30;
date.setTime(date.getTime() + (minutes * 60 * 1000));
$.cookie("example", "foo", { expires: date });
You could use one of these for the relative path root:
ActiveWorkbook.Path
ThisWorkbook.Path
App.Path
If you have selective revisions to merge, say A, C, F, J from A,B,C,D,E,F,G,H,I,J commits, simply use below command:
git cherry-pick A C F J
Use Socket.Connected
Property.
--UPDATE--
As Paul Turner answered Socket.Connected cannot be used in this situation. You need to poll connection every time to see if connection is still active. See 2
use Contains of jquery Contains like this
if ($('.type:contains("> <")').length > 0)
{
//do stuffs to change
}
As per macOS 10.14.5, below are the details:
Go to
system preferences > sharing > remote login.
Since the MemberwiseClone() method is not public, I created this simple extension method in order to make it easier to clone objects:
public static T Clone<T>(this T obj)
{
var inst = obj.GetType().GetMethod("MemberwiseClone", System.Reflection.BindingFlags.Instance | System.Reflection.BindingFlags.NonPublic);
return (T)inst?.Invoke(obj, null);
}
Usage:
var clone = myObject.Clone();
var data="your data";//ex data="id="+id;
$.ajax({
method : "POST",
url : "file name", //url: "demo.php"
data : "data",
success : function(result){
//set result to div or target
//ex $("#divid).html(result)
}
});
If you're using yarn, you may have to run commands with yarn in front. Example:
yarn react-native info
Semaphore can be counted, while mutex can only count to 1.
Suppose you have a thread running which accepts client connections. This thread can handle 10 clients simultaneously. Then each new client sets the semaphore until it reaches 10. When the Semaphore has 10 flags, then your thread won't accept new connections
Mutex are usually used for guarding stuff. Suppose your 10 clients can access multiple parts of the system. Then you can protect a part of the system with a mutex so when 1 client is connected to that sub-system, no one else should have access. You can use a Semaphore for this purpose too. A mutex is a "Mutual Exclusion Semaphore".
Simply pass the sorted items from the dictionary to the plot()
function. concentration.items()
returns a list of tuples where each tuple contains a key from the dictionary and its corresponding value.
You can take advantage of list unpacking (with *
) to pass the sorted data directly to zip, and then again to pass it into plot()
:
import matplotlib.pyplot as plt
concentration = {
0: 0.19849878712984576,
5000: 0.093917341754771386,
10000: 0.075060643507712022,
20000: 0.06673074282575861,
30000: 0.057119318961966224,
50000: 0.046134834546203485,
100000: 0.032495766396631424,
200000: 0.018536317451599615,
500000: 0.0059499290585381479}
plt.plot(*zip(*sorted(concentration.items())))
plt.show()
sorted()
sorts tuples in the order of the tuple's items so you don't need to specify a key
function because the tuples returned by dict.item()
already begin with the key value.
Another option which doesn't have the need to create a custom Model is to use a Tuple<>.
@model Tuple<Person,Order>
It's not as clean as creating a new class which contains both, as per Andi's answer, but it is viable.
From http://www.statmethods.net/management/subset.html
# exclude variables v1, v2, v3
myvars <- names(mydata) %in% c("v1", "v2", "v3")
newdata <- mydata[!myvars]
# exclude 3rd and 5th variable
newdata <- mydata[c(-3,-5)]
# delete variables v3 and v5
mydata$v3 <- mydata$v5 <- NULL
Thought it was really clever make a list of "not to include"
None of this answers was working for me (Nuget 2.8.6) because of missing some tips, will try to add them here as it might be useful for others.
After reading the following sources:
https://docs.nuget.org/consume/NuGet-Config-Settings
https://github.com/NuGet/Home/issues/1346
It appears that
E.g.
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<solution>
<add key="disableSourceControlIntegration" value="true" />
</solution>
<config>
<add key="repositorypath" value="$/../../../Common/packages" />
</config>
</configuration>
You can also use NuGet command to ensure that syntax will be correct like this:
NuGet.exe config -Set repositoryPath=$/../../../Common/packages -ConfigFile NuGet.Config
This is how I converted a number to an ASCII code. 0 though 9 in hex code is 0x30-0x39. 6 would be 0x36.
unsigned int temp = 6;
or you can use unsigned char temp = 6;
unsigned char num;
num = 0x30| temp;
this will give you the ASCII value for 6. You do the same for 0 - 9
to convert ASCII to a numeric value I came up with this code.
unsigned char num,code;
code = 0x39; // ASCII Code for 9 in Hex
num = 0&0F & code;
Please also note that on certain environments and conditions (such as running on windows on dispatch level >= DISPATCH LEVEL), you cannot use mutex but rather spinlock. On unix - same thing.
Here is equivalent question on competitor stackexchange unix site: https://unix.stackexchange.com/questions/5107/why-are-spin-locks-good-choices-in-linux-kernel-design-instead-of-something-more
Info on dispatching on windows systems: http://download.microsoft.com/download/e/b/a/eba1050f-a31d-436b-9281-92cdfeae4b45/IRQL_thread.doc
Application contexts provide a means for resolving text messages, including support for i18n of those messages. Application contexts provide a generic way to load file resources, such as images. Application contexts can publish events to beans that are registered as listeners. Certain operations on the container or beans in the container, which have to be handled in a programmatic fashion with a bean factory, can be handled declaratively in an application context. ResourceLoader support: Spring’s Resource interface us a flexible generic abstraction for handling low-level resources. An application context itself is a ResourceLoader, Hence provides an application with access to deployment-specific Resource instances. MessageSource support: The application context implements MessageSource, an interface used to obtain localized messages, with the actual implementation being pluggable
Declare extern int x;
in file.h.
And define int x;
only in one cpp file.cpp.
Since Dave asked for me to repeat my answer to Omitting all xsi and xsd namespaces when serializing an object in .NET, I have updated this post and repeated my answer here from the afore-mentioned link. The example used in this answer is the same example used for the other question. What follows is copied, verbatim.
After reading Microsoft's documentation and several solutions online, I have discovered the solution to this problem. It works with both the built-in XmlSerializer
and custom XML serialization via IXmlSerialiazble
.
To whit, I'll use the same MyTypeWithNamespaces
XML sample that's been used in the answers to this question so far.
[XmlRoot("MyTypeWithNamespaces", Namespace="urn:Abracadabra", IsNullable=false)]
public class MyTypeWithNamespaces
{
// As noted below, per Microsoft's documentation, if the class exposes a public
// member of type XmlSerializerNamespaces decorated with the
// XmlNamespacesDeclarationAttribute, then the XmlSerializer will utilize those
// namespaces during serialization.
public MyTypeWithNamespaces( )
{
this._namespaces = new XmlSerializerNamespaces(new XmlQualifiedName[] {
// Don't do this!! Microsoft's documentation explicitly says it's not supported.
// It doesn't throw any exceptions, but in my testing, it didn't always work.
// new XmlQualifiedName(string.Empty, string.Empty), // And don't do this:
// new XmlQualifiedName("", "")
// DO THIS:
new XmlQualifiedName(string.Empty, "urn:Abracadabra") // Default Namespace
// Add any other namespaces, with prefixes, here.
});
}
// If you have other constructors, make sure to call the default constructor.
public MyTypeWithNamespaces(string label, int epoch) : this( )
{
this._label = label;
this._epoch = epoch;
}
// An element with a declared namespace different than the namespace
// of the enclosing type.
[XmlElement(Namespace="urn:Whoohoo")]
public string Label
{
get { return this._label; }
set { this._label = value; }
}
private string _label;
// An element whose tag will be the same name as the property name.
// Also, this element will inherit the namespace of the enclosing type.
public int Epoch
{
get { return this._epoch; }
set { this._epoch = value; }
}
private int _epoch;
// Per Microsoft's documentation, you can add some public member that
// returns a XmlSerializerNamespaces object. They use a public field,
// but that's sloppy. So I'll use a private backed-field with a public
// getter property. Also, per the documentation, for this to work with
// the XmlSerializer, decorate it with the XmlNamespaceDeclarations
// attribute.
[XmlNamespaceDeclarations]
public XmlSerializerNamespaces Namespaces
{
get { return this._namespaces; }
}
private XmlSerializerNamespaces _namespaces;
}
That's all to this class. Now, some objected to having an XmlSerializerNamespaces
object somewhere within their classes; but as you can see, I neatly tucked it away in the default constructor and exposed a public property to return the namespaces.
Now, when it comes time to serialize the class, you would use the following code:
MyTypeWithNamespaces myType = new MyTypeWithNamespaces("myLabel", 42);
/******
OK, I just figured I could do this to make the code shorter, so I commented out the
below and replaced it with what follows:
// You have to use this constructor in order for the root element to have the right namespaces.
// If you need to do custom serialization of inner objects, you can use a shortened constructor.
XmlSerializer xs = new XmlSerializer(typeof(MyTypeWithNamespaces), new XmlAttributeOverrides(),
new Type[]{}, new XmlRootAttribute("MyTypeWithNamespaces"), "urn:Abracadabra");
******/
XmlSerializer xs = new XmlSerializer(typeof(MyTypeWithNamespaces),
new XmlRootAttribute("MyTypeWithNamespaces") { Namespace="urn:Abracadabra" });
// I'll use a MemoryStream as my backing store.
MemoryStream ms = new MemoryStream();
// This is extra! If you want to change the settings for the XmlSerializer, you have to create
// a separate XmlWriterSettings object and use the XmlTextWriter.Create(...) factory method.
// So, in this case, I want to omit the XML declaration.
XmlWriterSettings xws = new XmlWriterSettings();
xws.OmitXmlDeclaration = true;
xws.Encoding = Encoding.UTF8; // This is probably the default
// You could use the XmlWriterSetting to set indenting and new line options, but the
// XmlTextWriter class has a much easier method to accomplish that.
// The factory method returns a XmlWriter, not a XmlTextWriter, so cast it.
XmlTextWriter xtw = (XmlTextWriter)XmlTextWriter.Create(ms, xws);
// Then we can set our indenting options (this is, of course, optional).
xtw.Formatting = Formatting.Indented;
// Now serialize our object.
xs.Serialize(xtw, myType, myType.Namespaces);
Once you have done this, you should get the following output:
<MyTypeWithNamespaces>
<Label xmlns="urn:Whoohoo">myLabel</Label>
<Epoch>42</Epoch>
</MyTypeWithNamespaces>
I have successfully used this method in a recent project with a deep hierachy of classes that are serialized to XML for web service calls. Microsoft's documentation is not very clear about what to do with the publicly accesible XmlSerializerNamespaces
member once you've created it, and so many think it's useless. But by following their documentation and using it in the manner shown above, you can customize how the XmlSerializer generates XML for your classes without resorting to unsupported behavior or "rolling your own" serialization by implementing IXmlSerializable
.
It is my hope that this answer will put to rest, once and for all, how to get rid of the standard xsi
and xsd
namespaces generated by the XmlSerializer
.
UPDATE: I just want to make sure I answered the OP's question about removing all namespaces. My code above will work for this; let me show you how. Now, in the example above, you really can't get rid of all namespaces (because there are two namespaces in use). Somewhere in your XML document, you're going to need to have something like xmlns="urn:Abracadabra" xmlns:w="urn:Whoohoo
. If the class in the example is part of a larger document, then somewhere above a namespace must be declared for either one of (or both) Abracadbra
and Whoohoo
. If not, then the element in one or both of the namespaces must be decorated with a prefix of some sort (you can't have two default namespaces, right?). So, for this example, Abracadabra
is the default namespace. I could inside my MyTypeWithNamespaces
class add a namespace prefix for the Whoohoo
namespace like so:
public MyTypeWithNamespaces
{
this._namespaces = new XmlSerializerNamespaces(new XmlQualifiedName[] {
new XmlQualifiedName(string.Empty, "urn:Abracadabra"), // Default Namespace
new XmlQualifiedName("w", "urn:Whoohoo")
});
}
Now, in my class definition, I indicated that the <Label/>
element is in the namespace "urn:Whoohoo"
, so I don't need to do anything further. When I now serialize the class using my above serialization code unchanged, this is the output:
<MyTypeWithNamespaces xmlns:w="urn:Whoohoo">
<w:Label>myLabel</w:Label>
<Epoch>42</Epoch>
</MyTypeWithNamespaces>
Because <Label>
is in a different namespace from the rest of the document, it must, in someway, be "decorated" with a namespace. Notice that there are still no xsi
and xsd
namespaces.
This ends my answer to the other question. But I wanted to make sure I answered the OP's question about using no namespaces, as I feel I didn't really address it yet. Assume that <Label>
is part of the same namespace as the rest of the document, in this case urn:Abracadabra
:
<MyTypeWithNamespaces>
<Label>myLabel<Label>
<Epoch>42</Epoch>
</MyTypeWithNamespaces>
Your constructor would look as it would in my very first code example, along with the public property to retrieve the default namespace:
// As noted below, per Microsoft's documentation, if the class exposes a public
// member of type XmlSerializerNamespaces decorated with the
// XmlNamespacesDeclarationAttribute, then the XmlSerializer will utilize those
// namespaces during serialization.
public MyTypeWithNamespaces( )
{
this._namespaces = new XmlSerializerNamespaces(new XmlQualifiedName[] {
new XmlQualifiedName(string.Empty, "urn:Abracadabra") // Default Namespace
});
}
[XmlNamespaceDeclarations]
public XmlSerializerNamespaces Namespaces
{
get { return this._namespaces; }
}
private XmlSerializerNamespaces _namespaces;
Then, later, in your code that uses the MyTypeWithNamespaces
object to serialize it, you would call it as I did above:
MyTypeWithNamespaces myType = new MyTypeWithNamespaces("myLabel", 42);
XmlSerializer xs = new XmlSerializer(typeof(MyTypeWithNamespaces),
new XmlRootAttribute("MyTypeWithNamespaces") { Namespace="urn:Abracadabra" });
...
// Above, you'd setup your XmlTextWriter.
// Now serialize our object.
xs.Serialize(xtw, myType, myType.Namespaces);
And the XmlSerializer
would spit back out the same XML as shown immediately above with no additional namespaces in the output:
<MyTypeWithNamespaces>
<Label>myLabel<Label>
<Epoch>42</Epoch>
</MyTypeWithNamespaces>
My specific case has the following scenario. Our tests
public class VenueResourceContainerTest extends BaseTixContainerTest
all extend
BaseTixContainerTest
and JUnit was trying to run BaseTixContainerTest. Poor BaseTixContainerTest was just trying to setup the container, setup the client, order some pizza and relax... man.
As mentioned previously, you can annotate the class with
@Ignore
But that caused JUnit to report that test as skipped (as opposed to completely ignored).
Tests run: 4, Failures: 0, Errors: 0, Skipped: 1
That kind of irritated me.
So I made BaseTixContainerTest abstract, and now JUnit truly ignores it.
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0
In Notepad++ go to Plugins > Plugin manager > Show Plugin Manager
then find Xml Tools
plugin. Tick the box and click Install
Open XML document you want to validate and click Ctrl+Shift+Alt+M (Or use Menu if this is your preference Plugins > XML Tools > Validate Now
).
Following dialog will open:
Click on ...
. Point to XSD file and I am pretty sure you'll be able to handle things from here.
Hope this saves you some time.
EDIT:
Plugin manager was not included in some versions of Notepad++ because many users didn't like commercials that it used to show. If you want to keep an older version, however still want plugin manager, you can get it on github, and install it by extracting the archive and copying contents to plugins and updates folder.
In version 7.7.1
plugin manager is back under a different guise... Plugin Admin
so now you can simply update notepad++ and have it back.
Java <= 6.x just allows you to catch one exception for each catch block:
try {
} catch (ExceptionType name) {
} catch (ExceptionType name) {
}
Documentation:
Each catch block is an exception handler and handles the type of exception indicated by its argument. The argument type, ExceptionType, declares the type of exception that the handler can handle and must be the name of a class that inherits from the Throwable class.
For Java 7 you can have multiple Exception caught on one catch block:
catch (IOException|SQLException ex) {
logger.log(ex);
throw ex;
}
Documentation:
In Java SE 7 and later, a single catch block can handle more than one type of exception. This feature can reduce code duplication and lessen the temptation to catch an overly broad exception.
Reference: http://docs.oracle.com/javase/tutorial/essential/exceptions/catch.html
If you have a regular submit button, you could add an onclick event to it that does the follow:
document.getElementById('otherForm').submit();
Disabling the Sync to VBlank checkbox in nvidia-settings (OpenGL Settings tab) does the trick for me.
There is a javascript library for this, see FileSaver.js on Github
However the saveAs()
function won't send pure string to the browser, you need to convert it to blob
:
function data2blob(data, isBase64) {
var chars = "";
if (isBase64)
chars = atob(data);
else
chars = data;
var bytes = new Array(chars.length);
for (var i = 0; i < chars.length; i++) {
bytes[i] = chars.charCodeAt(i);
}
var blob = new Blob([new Uint8Array(bytes)]);
return blob;
}
and then call saveAs
on the blob, as like:
var myString = "my string with some stuff";
saveAs( data2blob(myString), "myString.txt" );
Of course remember to include the above-mentioned javascript library on your webpage using <script src=FileSaver.js>
Your command is right, but the error shows that you didn't create your ssh key yet. To generate new ssh key enter the following command into the terminal.
ssh-keygen
After entering the command then you will be asked to enter file name and passphrase. Normally you don't need to change this. Just press enter. Then your key will be generated in ~/.ssh
directory. After this, you can copy your key by the following command.
pbcopy < ~/.ssh/id_rsa.pub
or
cat .ssh/id_rsa.pub | pbcopy
You can find more about this here ssh.
Still another solution:
timezone('utc', now())
You could learn about Python loops here: http://en.wikibooks.org/wiki/Python_Programming/Loops
You have to know that Python doesn't have { and } for start and end of loop, instead it depends on tab chars you enter in first of line, I mean line indents.
So you can do loop inside loop with double tab (indent)
An example of double loop is like this:
onetoten = range(1,11)
tentotwenty = range(10,21)
for count in onetoten:
for count2 in tentotwenty
print(count2)
@Provider
public class BadURIExceptionMapper implements ExceptionMapper<NotFoundException> {
public Response toResponse(NotFoundException exception){
return Response.status(Response.Status.NOT_FOUND).
entity(new ErrorResponse(exception.getClass().toString(),
exception.getMessage()) ).
build();
}
}
Create above class. This will handle 404 (NotFoundException) and here in toResponse method you can give your custom response. Similarly there are ParamException etc. which you would need to map to provide customized responses.
If you need to remove just trailing whitespace, you could use str.rstrip()
, which should be slightly more efficient than str.strip()
:
>>> lst = ['this\n', 'is\n', 'a\n', 'list\n', 'of\n', 'words\n']
>>> [x.rstrip() for x in lst]
['this', 'is', 'a', 'list', 'of', 'words']
>>> list(map(str.rstrip, lst))
['this', 'is', 'a', 'list', 'of', 'words']
Declare
public static int[] locations={1,2,3};
outside of the main method.
-p|--parent
will be used if you are trying to create a directory with top-down
approach. That will create the parent directory then child and so on iff none exists.
-p, --parents no error if existing, make parent directories as needed
About rlidwka
it means giving full or administrative access. Found it here https://itservices.stanford.edu/service/afs/intro/permissions/unix.
You should be pointing it towards the Developer
directory, not the Xcode application bundle. Run this:
sudo xcode-select --switch /Applications/Xcode.app/Contents/Developer
With recent versions of Xcode, you can go to Xcode ? Preferences… ? Locations and pick one of the options for Command Line Tools to set the location.
Why don't you just stash the vbscript in a batch/vbscript file hybrid. Name the batch hybrid Converter.bat and you can execute it directly as Converter from the cmd line. Sure you can default ALL scripts to run from Cscript or Wscript, but if you want to execute your vbs as a windows script rather than a console script, this could cause some confusion later on. So just set your code to a batch file and run it directly.
Check the answer -> Here
And here is an example:
Converter.bat
::' VBS/Batch Hybrid
::' --- Batch portion ---------
rem^ &@echo off
rem^ &call :'sub
rem^ &exit /b
:'sub
rem^ &echo begin batch
rem^ &cscript //nologo //e:vbscript "%~f0"
rem^ &echo end batch
rem^ &exit /b
'----- VBS portion -----
Dim tester
tester = "Convert data here"
Msgbox tester
# ????????? ????? ?????
def gen_prime(x):
multiples = []
results = []
for i in range(2, x+1):
if i not in multiples:
results.append(i)
for j in range(i*i, x+1, i):
multiples.append(j)
return results
import timeit
# ???????? ?????
start_time = timeit.default_timer()
gen_prime(3000)
print(timeit.default_timer() - start_time)
# start_time = timeit.default_timer()
# gen_prime(1001)
# print(timeit.default_timer() - start_time)
Base is younger than your question, and definitely feels like a 1.0, but the user experience is miles better than the experience of using any of the "cross-platform" apps on a Mac.
http://menial.co.uk/software/base/
I recommend you buy a license before the developer realizes he is charging too little for it.
UPDATE: Since December 2008, Base is now up to version 2.1, it has become an excellent product. I don't remember what it used to cost, but I paid for the 1.x to 2.x upgrade. Still highly recommended.
ANOTHER UPDATE: Base is available on the Mac App Store, you may find it useful to read the reviews there.
Off the top of my head:
GetType()
instead of typeof(Page)
in order to bind the script to your actual page class instead of the base class,Page.UniqueID
, which is not that meaningful since it's supposed to be used by named controls,PreRender
phase:protected void Page_PreRender(object sender, EventArgs e)
{
ScriptManager.RegisterStartupScript(this, GetType(), "YourUniqueScriptKey",
"alert('This pops up');", true);
}
Make un unbind before the click;
$("#link_button").unbind('click');
$("#link_button")
.button()
.click(function () {
$("#attachmentForm").slideToggle("fast");
});
I am trying to do something similar to this. As commented above, I think you would want to build a new image with a custom Dockerfile (using the image you pulled as a base image), ADD
your certificate, then RUN update-ca-certificates
. This way you will have a consistent state each time you start a container from this new image.
# Dockerfile
FROM some-base-image:0.1
ADD you_certificate.crt:/container/cert/path
RUN update-ca-certificates
Let's say a docker build
against that Dockerfile produced IMAGE_ID. On the next docker run -d [any other options] IMAGE_ID
, the container started by that command will have your certificate info. Simple and reproducible.
For standards compliant HTML5 add all this css to remove all space between images in tables:
table {
border-spacing: 0;
border-collapse: collapse;
}
td {
padding:0px;
}
td img {
display:block;
}
DATE
is a reserved keyword in Oracle, so I'm using column-name your_date
instead.
If you have an index on your_date
, I would use
WHERE your_date >= TO_DATE('2010-08-03', 'YYYY-MM-DD')
AND your_date < TO_DATE('2010-08-04', 'YYYY-MM-DD')
or BETWEEN
:
WHERE your_date BETWEEN TO_DATE('2010-08-03', 'YYYY-MM-DD')
AND TO_DATE('2010-08-03 23:59:59', 'YYYY-MM-DD HH24:MI:SS')
If there is no index or if there are not too many records
WHERE TRUNC(your_date) = TO_DATE('2010-08-03', 'YYYY-MM-DD')
should be sufficient. TRUNC
without parameter removes hours, minutes and seconds from a DATE
.
If performance really matters, consider putting a Function Based Index
on that column:
CREATE INDEX trunc_date_idx ON t1(TRUNC(your_date));
Below python program should work to access hive tables from python:
import commands
cmd = "hive -S -e 'SELECT * FROM db_name.table_name LIMIT 1;' "
status, output = commands.getstatusoutput(cmd)
if status == 0:
print output
else:
print "error"
I have met the same problem. My project is running on the local server. I checked my php code.
$db = mysqli_connect('localhost', 'root', 'root', 'smart');
I use localhost
to connect to my local database. That maybe the cause of the problem which you're describing. You can modify your HOSTS
file. Add the line
127.0.0.1 localhost
.
this code worked for me in partial view:
<a href="/Content/[email protected]">@item.Title</a>
You can kill the process which is running the container.
With this command you can list the processes related with the docker container:
ps -aux | grep $(docker ps -a | grep container-name | awk '{print $1}')
Now you have the process ids to kill with kill or kill -9.
table
in a div
(e.g. if the HTML is generated from Markdown) but still want to have scrollbars:table {_x000D_
display: block;_x000D_
max-width: -moz-fit-content;_x000D_
max-width: fit-content;_x000D_
margin: 0 auto;_x000D_
overflow-x: auto;_x000D_
white-space: nowrap;_x000D_
}
_x000D_
<table>_x000D_
<tr>_x000D_
<td>Especially on mobile, a table can easily become wider than the viewport.</td>_x000D_
<td>Using the right CSS, you can get scrollbars on the table without wrapping it.</td>_x000D_
</tr>_x000D_
</table>_x000D_
_x000D_
<table>_x000D_
<tr>_x000D_
<td>A centered table.</td>_x000D_
</tr>_x000D_
</table>
_x000D_
Explanation: display: block;
makes it possible to have scrollbars. By default (and unlike tables), blocks span the full width of the parent element. This can be prevented with max-width: fit-content;
, which allows you to still horizontally center tables with less content using margin: 0 auto;
. white-space: nowrap;
is optional (but useful for this demonstration).
The only way to see more is to start saving them before the user's tweet count hits 3200. Services which show more than 3200 tweets have saved them in their own dbs. There's currently no way to get more than that through any Twitter API.
https://dev.twitter.com/discussions/276
Note from that second link: "…the 3,200 limit is for browsing the timeline only. Tweets can always be requested by their ID using the GET statuses/show/:id method."
I'll try and explain it as simple as possible. So there is no guarantee of the accuracy of the actual terms.
Session is where to initiate the connectivity to AWS services. E.g. following is default session that uses the default credential profile(e.g. ~/.aws/credentials, or assume your EC2 using IAM instance profile )
sqs = boto3.client('sqs')
s3 = boto3.resource('s3')
Because default session is limit to the profile or instance profile used, sometimes you need to use the custom session to override the default session configuration (e.g. region_name, endpoint_url, etc. ) e.g.
# custom resource session must use boto3.Session to do the override
my_west_session = boto3.Session(region_name = 'us-west-2')
my_east_session = boto3.Session(region_name = 'us-east-1')
backup_s3 = my_west_session.resource('s3')
video_s3 = my_east_session.resource('s3')
# you have two choices of create custom client session.
backup_s3c = my_west_session.client('s3')
video_s3c = boto3.client("s3", region_name = 'us-east-1')
Resource : This is the high-level service class recommended to be used. This allows you to tied particular AWS resources and passes it along, so you just use this abstraction than worry which target services are pointed to. As you notice from the session part, if you have a custom session, you just pass this abstract object than worrying about all custom regions,etc to pass along. Following is a complicated example E.g.
import boto3
my_west_session = boto3.Session(region_name = 'us-west-2')
my_east_session = boto3.Session(region_name = 'us-east-1')
backup_s3 = my_west_session.resource("s3")
video_s3 = my_east_session.resource("s3")
backup_bucket = backup_s3.Bucket('backupbucket')
video_bucket = video_s3.Bucket('videobucket')
# just pass the instantiated bucket object
def list_bucket_contents(bucket):
for object in bucket.objects.all():
print(object.key)
list_bucket_contents(backup_bucket)
list_bucket_contents(video_bucket)
Client is a low level class object. For each client call, you need to explicitly specify the targeting resources, the designated service target name must be pass long. You will lose the abstraction ability.
For example, if you only deal with the default session, this looks similar to boto3.resource.
import boto3
s3 = boto3.client('s3')
def list_bucket_contents(bucket_name):
for object in s3.list_objects_v2(Bucket=bucket_name) :
print(object.key)
list_bucket_contents('Mybucket')
However, if you want to list objects from a bucket in different regions, you need to specify the explicit bucket parameter required for the client.
import boto3
backup_s3 = my_west_session.client('s3',region_name = 'us-west-2')
video_s3 = my_east_session.client('s3',region_name = 'us-east-1')
# you must pass boto3.Session.client and the bucket name
def list_bucket_contents(s3session, bucket_name):
response = s3session.list_objects_v2(Bucket=bucket_name)
if 'Contents' in response:
for obj in response['Contents']:
print(obj['key'])
list_bucket_contents(backup_s3, 'backupbucket')
list_bucket_contents(video_s3 , 'videobucket')
As the other answers suggest, editing/removing credentials in the Manage Windows Credentials
work and does the job. However, you need to do this each time when the password changes or credentials do not work for some work. Using ssh key
has been extremely useful for me where I don't have to bother about these again once I'm done creating a ssh-key
and adding them on the server repository (github/bitbucket/gitlab).
Generating a new ssh-key
Open Git Bash.
Paste the text below, substituting in your repo's email address.
$ ssh-keygen -t rsa -b 4096 -C "[email protected]"
When you're prompted to "Enter a file in which to save the key," press Enter. This accepts the default file location.
Then you'll be asked to type a secure passphrase. You can type a passphrase, hit enter and type the passphrase again.
Or, Hit enter twice for empty passphrase.
Copy this on the clipboard:
clip < ~/.ssh/id_rsa.pub
And then add this key into your repo's profile. For e.g, on github->setting->SSH keys -> paste the key that you coppied ad hit add
You're done once and for all!
You need Math.Round
, not Math.Ceiling
. Ceiling
always "rounds" up, while Round
rounds up or down depending on the value after the decimal point.
sizeof
only works to find the length of the array if you apply it to the original array.
int a[5]; //real array. NOT a pointer
sizeof(a); // :)
However, by the time the array decays into a pointer, sizeof will give the size of the pointer and not of the array.
int a[5];
int * p = a;
sizeof(p); // :(
As you have already smartly pointed out main receives the length of the array as an argument (argc). Yes, this is out of necessity and is not redundant. (Well, it is kind of reduntant since argv is conveniently terminated by a null pointer but I digress)
There is some reasoning as to why this would take place. How could we make things so that a C array also knows its length?
A first idea would be not having arrays decaying into pointers when they are passed to a function and continuing to keep the array length in the type system. The bad thing about this is that you would need to have a separate function for every possible array length and doing so is not a good idea. (Pascal did this and some people think this is one of the reasons it "lost" to C)
A second idea is storing the array length next to the array, just like any modern programming language does:
a -> [5];[0,0,0,0,0]
But then you are just creating an invisible struct
behind the scenes and the C philosophy does not approve of this kind of overhead. That said, creating such a struct yourself is often a good idea for some sorts of problems:
struct {
size_t length;
int * elements;
}
Another thing you can think about is how strings in C are null terminated instead of storing a length (as in Pascal). To store a length without worrying about limits need a whopping four bytes, an unimaginably expensive amount (at least back then). One could wonder if arrays could be also null terminated like that but then how would you allow the array to store a null?
It is easier with Kotlin using for-in loop:
for (childView in ll.children) {
//childView is a child of ll
}
Here ll
is id
of LinearLayout
defined in layout XML.
In the Old Days (pre-ANSI), predefining symbols such as unix
and vax
was a way to allow code to detect at compile time what system it was being compiled for. There was no official language standard back then (beyond the reference material at the back of the first edition of K&R), and C code of any complexity was typically a complex maze of #ifdef
s to allow for differences between systems. These macro definitions were generally set by the compiler itself, not defined in a library header file. Since there were no real rules about which identifiers could be used by the implementation and which were reserved for programmers, compiler writers felt free to use simple names like unix
and assumed that programmers would simply avoid using those names for their own purposes.
The 1989 ANSI C standard introduced rules restricting what symbols an implementation could legally predefine. A macro predefined by the compiler could only have a name starting with two underscores, or with an underscore followed by an uppercase letter, leaving programmers free to use identifiers not matching that pattern and not used in the standard library.
As a result, any compiler that predefines unix
or linux
is non-conforming, since it will fail to compile perfectly legal code that uses something like int linux = 5;
.
As it happens, gcc is non-conforming by default -- but it can be made to conform (reasonably well) with the right command-line options:
gcc -std=c90 -pedantic ... # or -std=c89 or -ansi
gcc -std=c99 -pedantic
gcc -std=c11 -pedantic
See the gcc manual for more details.
gcc will be phasing out these definitions in future releases, so you shouldn't write code that depends on them. If your program needs to know whether it's being compiled for a Linux target or not it can check whether __linux__
is defined (assuming you're using gcc or a compiler that's compatible with it). See the GNU C preprocessor manual for more information.
A largely irrelevant aside: the "Best One Liner" winner of the 1987 International Obfuscated C Code Contest, by David Korn (yes, the author of the Korn Shell) took advantage of the predefined unix
macro:
main() { printf(&unix["\021%six\012\0"],(unix)["have"]+"fun"-0x60);}
It prints "unix"
, but for reasons that have absolutely nothing to do with the spelling of the macro name.
I would take those directions to mean:
function makeGamePlayer(name,totalScore,gamesPlayed) {
//should return an object with three keys:
// name
// totalScore
// gamesPlayed
var obj = { //note you don't use = in an object definition
"name": name,
"totalScore": totalScore,
"gamesPlayed": gamesPlayed
}
return obj;
}
That's because your hidden fields have duplicate IDs, so jQuery only returns the first in the set. Give them classes instead, like .uid
and grab them via:
var uids = $(".uid").map(function() {
return this.value;
}).get();
Demo: http://jsfiddle.net/karim79/FtcnJ/
EDIT: say your output looks like the following (notice, IDs have changed to classes)
<fieldset><legend>John Smith</legend>
<img src='foo.jpg'/><br>
<a href="#" class="aaf">add as friend</a>
<input name="uid" type="hidden" value='<?php echo $row->uid;?>' class="uid">
</fieldset>
You can target the 'uid' relative to the clicked anchor like this:
$("a.aaf").click(function() {
alert($(this).next('.uid').val());
});
Important: do not have any duplicate IDs. They will cause problems. They are invalid, bad and you should not do it.
export abstract class formBase<T> extends baseClass {
protected item = {} as T;
}
Its object will be able to receive any parameter, however, type T is only a typescript reference and can not be created through a constructor. That is, it will not create any class objects.
https://developer.mozilla.org/en/JavaScript/Reference/Global_Objects/Date/getYear
getYear
is no longer used and has been replaced by thegetFullYear
method.The
getYear
method returns the year minus 1900; thus:
- For years greater than or equal to 2000, the value returned by
getYear
is 100 or greater. For example, if the year is 2026,getYear
returns 126.- For years between and including 1900 and 1999, the value returned by
getYear
is between 0 and 99. For example, if the year is 1976,getYear
returns 76.- For years less than 1900, the value returned by
getYear
is less than 0. For example, if the year is 1800,getYear
returns -100.- To take into account years before and after 2000, you should use
getFullYear
instead ofgetYear
so that the year is specified in full.
I use a similar technique to what @Sarfraz posted, except instead of hiding elements, I just manipulate the class of the image that I'm loading.
<style type="text/css">
.loading { background-image: url(loading.gif); }
.loaderror { background-image: url(loaderror.gif); }
</style>
...
<img id="image" class="loading" />
...
<script type="text/javascript">
var img = new Image();
img.onload = function() {
i = document.getElementById('image');
i.removeAttribute('class');
i.src = img.src;
};
img.onerror = function() {
document.getElementById('image').setAttribute('class', 'loaderror');
};
img.src = 'http://path/to/image.png';
</script>
In my case, sometimes images don't load, so I handle the onerror event to change the image class so it displays an error background image (rather than the browser's broken image icon).
You will need to install the Apple Developer Tools. Once you have done that, the easiest thing is to either use the Xcode IDE or use gcc
, or nowadays better cc
(the clang LLVM compiler), from the command line.
According to Apple's site, the latest version of Xcode (3.2.1) only runs on Snow Leopard (10.6) so if you have an earlier version of OS X you will need to use an older version of Xcode. Your Mac should have come with a Developer Tools DVD which will contain a version that should run on your system. Also, the Apple Developer Tools site still has older versions available for download. Xcode 3.1.4 should run on Leopard (10.5).
suppose you want to write a url to fetch some order, you can say
www.mydomain.com/order/123
where 123 is orderId.
So now the url you will use in spring mvc controller would look like
/order/{orderId}
Now order id can be declared a path variable
@RequestMapping(value = " /order/{orderId}", method=RequestMethod.GET)
public String getOrder(@PathVariable String orderId){
//fetch order
}
if you use url www.mydomain.com/order/123, then orderId variable will be populated by value 123 by spring
Also note that PathVariable differs from requestParam as pathVariable is part of URL.
The same url using request param would look like www.mydomain.com/order?orderId=123
Looks like this is unimplemented, as of the time of this writing:
https://github.com/sass/sass/issues/193
For libsass (C/C++ implementation), import works for *.css
the same way as for *.scss
files - just omit the extension:
@import "path/to/file";
This will import path/to/file.css
.
See this answer for further details.
See this answer for Ruby implementation (sass gem)
I tried all the options above and none worked. This is what I did that worked :
@{
string str = @"[a-z0-9._%+-]+@[a-z0-9.-]+\.[a-z]{2,3}$";
}
<td>Email</td>
<td>
<input type="text" id="txtEmail" required name="email" pattern=@str />
</td>
I created a string varible and passed all the RegEx pattern code into it, then used the variable in the html, and Razor was cool with it.
You could try to split on (?<=\D)(?=\d)|(?<=\d)(?=\D)
, like:
str.split("(?<=\\D)(?=\\d)|(?<=\\d)(?=\\D)");
It matches positions between a number and not-a-number (in any order).
(?<=\D)(?=\d)
- matches a position between a non-digit (\D
) and a digit (\d
)(?<=\d)(?=\D)
- matches a position between a digit and a non-digit.Guessing from your directory name, you are trying to access the repository on the local filesystem. You still need to use URL syntax to access it:
svn export file:///e:/repositories/process/test.txt c:\test.txt
I had this issue when trying to debug an App on a device I hadn't used before. Developer profile was correctly set. The device was part of our teams account but wasn't included in my profile.
Simply had to open Organizer -> Select the Device -> Add to Member Center
you need to place the opening brace after main
, not before it
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
int main(void)
{
If you're using Django installed you can also try filesizeformat:
from django.template.defaultfilters import filesizeformat
filesizeformat(1073741824)
=>
"1.0 GB"
Sql Server fire this error when your application don't have enough rights to access the database. there are several reason about this error . To fix this error you should follow the following instruction.
Try to connect sql server from your server using management studio . if you use windows authentication to connect sql server then set your application pool identity to server administrator .
if you use sql server authentication then check you connection string in web.config of your web application and set user id and password of sql server which allows you to log in .
if your database in other server(access remote database) then first of enable remote access of sql server form sql server property from sql server management studio and enable TCP/IP form sql server configuration manager .
after doing all these stuff and you still can't access the database then check firewall of server form where you are trying to access the database and add one rule in firewall to enable port of sql server(by default sql server use 1433 , to check port of sql server you need to check sql server configuration manager network protocol TCP/IP port).
if your sql server is running on named instance then you need to write port number with sql serer name for example 117.312.21.21/nameofsqlserver,1433.
If you are using cloud hosting like amazon aws or microsoft azure then server or instance will running behind cloud firewall so you need to enable 1433 port in cloud firewall if you have default instance or specific port for sql server for named instance.
If you are using amazon RDS or SQL azure then you need to enable port from security group of that instance.
If you are accessing sql server through sql server authentication mode them make sure you enabled "SQL Server and Windows Authentication Mode" sql server instance property.
if you further face any difficulty then you need to provide more information about your web site and sql server .
Alternative way (but it's not python style. It's JS style)
{{ files and 'Update' or 'Continue' }}
At times you do not want to simply remove the characters, but just remove the accents. I came up with the following utility class which I use in my Java REST web projects whenever I need to include a String in an URL:
import java.text.Normalizer;
import java.text.Normalizer.Form;
import org.apache.commons.lang.StringUtils;
/**
* Utility class for String manipulation.
*
* @author Stefan Haberl
*/
public abstract class TextUtils {
private static String[] searchList = { "Ä", "ä", "Ö", "ö", "Ü", "ü", "ß" };
private static String[] replaceList = { "Ae", "ae", "Oe", "oe", "Ue", "ue",
"sz" };
/**
* Normalizes a String by removing all accents to original 127 US-ASCII
* characters. This method handles German umlauts and "sharp-s" correctly
*
* @param s
* The String to normalize
* @return The normalized String
*/
public static String normalize(String s) {
if (s == null)
return null;
String n = null;
n = StringUtils.replaceEachRepeatedly(s, searchList, replaceList);
n = Normalizer.normalize(n, Form.NFD).replaceAll("[^\\p{ASCII}]", "");
return n;
}
/**
* Returns a clean representation of a String which might be used safely
* within an URL. Slugs are a more human friendly form of URL encoding a
* String.
* <p>
* The method first normalizes a String, then converts it to lowercase and
* removes ASCII characters, which might be problematic in URLs:
* <ul>
* <li>all whitespaces
* <li>dots ('.')
* <li>(semi-)colons (';' and ':')
* <li>equals ('=')
* <li>ampersands ('&')
* <li>slashes ('/')
* <li>angle brackets ('<' and '>')
* </ul>
*
* @param s
* The String to slugify
* @return The slugified String
* @see #normalize(String)
*/
public static String slugify(String s) {
if (s == null)
return null;
String n = normalize(s);
n = StringUtils.lowerCase(n);
n = n.replaceAll("[\\s.:;&=<>/]", "");
return n;
}
}
Being a German speaker I've included proper handling of German umlauts as well - the list should be easy to extend for other languages.
HTH
EDIT: Note that it may be unsafe to include the returned String in an URL. You should at least HTML encode it to prevent XSS attacks.
You can create a subclass of the view type, and override the onSizeChanged method.
I wanted to have scaling compound drawables on my text views that didn't require me to mess around with defining bitmap drawables in xml, etc. and did it this way:
public class StatIcon extends TextView {
private Bitmap mIcon;
public void setIcon(int drawableId) {
mIcon = BitmapFactory.decodeResource(RIApplication.appResources,
drawableId);
}
@Override
protected void onSizeChanged(int w, int h, int oldw, int oldh) {
if ((w > 0) && (mIcon != null))
this.setCompoundDrawablesWithIntrinsicBounds(
null,
new BitmapDrawable(Bitmap.createScaledBitmap(mIcon, w, w,
true)), null, null);
super.onSizeChanged(w, h, oldw, oldh);
}
}
(Note that I used w twice, not h, as in this case I was putting the icon above the text, and thus the icon shouldn't have the same height as the text view)
This can be applied to background drawables, or anything else you want to resize relative to your view size. onSizeChanged() is called the first time the View is made, so you don't need any special cases for initialising the size.
I personally would add a click handler to the child element that did nothing but stop the propagation of the click. So it would look something like:
$('.example > div').click(function (e) {
e.stopPropagation();
});
Try this function out to calculate distance between to points of latitude and longitude
function calculateDistanceBetweenTwoPoints($latitudeOne='', $longitudeOne='', $latitudeTwo='', $longitudeTwo='',$distanceUnit ='',$round=false,$decimalPoints='')
{
if (empty($decimalPoints))
{
$decimalPoints = '3';
}
if (empty($distanceUnit)) {
$distanceUnit = 'KM';
}
$distanceUnit = strtolower($distanceUnit);
$pointDifference = $longitudeOne - $longitudeTwo;
$toSin = (sin(deg2rad($latitudeOne)) * sin(deg2rad($latitudeTwo))) + (cos(deg2rad($latitudeOne)) * cos(deg2rad($latitudeTwo)) * cos(deg2rad($pointDifference)));
$toAcos = acos($toSin);
$toRad2Deg = rad2deg($toAcos);
$toMiles = $toRad2Deg * 60 * 1.1515;
$toKilometers = $toMiles * 1.609344;
$toNauticalMiles = $toMiles * 0.8684;
$toMeters = $toKilometers * 1000;
$toFeets = $toMiles * 5280;
$toYards = $toFeets / 3;
switch (strtoupper($distanceUnit))
{
case 'ML'://miles
$toMiles = ($round == true ? round($toMiles) : round($toMiles, $decimalPoints));
return $toMiles;
break;
case 'KM'://Kilometers
$toKilometers = ($round == true ? round($toKilometers) : round($toKilometers, $decimalPoints));
return $toKilometers;
break;
case 'MT'://Meters
$toMeters = ($round == true ? round($toMeters) : round($toMeters, $decimalPoints));
return $toMeters;
break;
case 'FT'://feets
$toFeets = ($round == true ? round($toFeets) : round($toFeets, $decimalPoints));
return $toFeets;
break;
case 'YD'://yards
$toYards = ($round == true ? round($toYards) : round($toYards, $decimalPoints));
return $toYards;
break;
case 'NM'://Nautical miles
$toNauticalMiles = ($round == true ? round($toNauticalMiles) : round($toNauticalMiles, $decimalPoints));
return $toNauticalMiles;
break;
}
}
Then use the fucntion as
echo calculateDistanceBetweenTwoPoints('11.657740','77.766270','11.074820','77.002160','ML',true,5);
Hope it helps
I think what you are looking for is this:
public class Ques2 {
/**
* @param args the command line arguments
*/
public static void main(String[] args) throws IOException {
BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
String input = br.readLine().toLowerCase();
StringBuilder result = new StringBuilder();
char currentCharacter;
int count;
for (int i = 0; i < input.length(); i++) {
currentCharacter = input.charAt(i);
count = 1;
while (i < input.length() - 1 && input.charAt(i + 1) == currentCharacter) {
count++;
i++;
}
result.append(currentCharacter);
result.append(count);
}
System.out.println("" + result);
}
}
You can use a redirect to that action :
redirect_to your_controller_action_url
More on : Rails Guide
To just render the new action :
redirect_to your_controller_action_url and return
You can return a structure from a function (or use the =
operator) without any problems. It's a well-defined part of the language. The only problem with struct b = a
is that you didn't provide a complete type. struct MyObj b = a
will work just fine. You can pass structures to functions as well - a structure is exactly the same as any built-in type for purposes of parameter passing, return values, and assignment.
Here's a simple demonstration program that does all three - passes a structure as a parameter, returns a structure from a function, and uses structures in assignment statements:
#include <stdio.h>
struct a {
int i;
};
struct a f(struct a x)
{
struct a r = x;
return r;
}
int main(void)
{
struct a x = { 12 };
struct a y = f(x);
printf("%d\n", y.i);
return 0;
}
The next example is pretty much exactly the same, but uses the built-in int
type for demonstration purposes. The two programs have the same behaviour with respect to pass-by-value for parameter passing, assignment, etc.:
#include <stdio.h>
int f(int x)
{
int r = x;
return r;
}
int main(void)
{
int x = 12;
int y = f(x);
printf("%d\n", y);
return 0;
}
Dim obj : Set obj = CreateObject("Scripting.FileSystemObject")
Dim outFile : Set outFile = obj.CreateTextFile("in.txt")
Dim inFile: Set inFile = obj.OpenTextFile("out.txt")
' Read file
Dim strRetVal : strRetVal = inFile.ReadAll
inFile.Close
' Write file
outFile.write (strRetVal)
outFile.Close
dynamic myDynamic = new { PropertyOne = true, PropertyTwo = false};
You've already got it: A if test else B
is a valid Python expression. The only problem with your dict comprehension as shown is that the place for an expression in a dict comprehension must have two expressions, separated by a colon:
{ (some_key if condition else default_key):(something_if_true if condition
else something_if_false) for key, value in dict_.items() }
The final if
clause acts as a filter, which is different from having the conditional expression.
Your array is occupying roughly 8 GB of memory (1,000 x 1,000,000 x sizeof(double) bytes). That might be a factor in your problem. It is a global variable rather than a stack variable, so you may be OK, but you're pushing limits here.
Writing that much data to a file is going to take a while.
You don't check that the file was opened successfully, which could be a source of trouble, too (if it did fail, a segmentation fault is very likely).
You really should introduce some named constants for 1,000 and 1,000,000; what do they represent?
You should also write a function to do the calculation; you could use an inline
function in C99 or later (or C++). The repetition in the code is excruciating to behold.
You should also use C99 notation for main()
, with the explicit return type (and preferably void
for the argument list when you are not using argc
or argv
):
int main(void)
Out of idle curiosity, I took a copy of your code, changed all occurrences of 1000 to ROWS, all occurrences of 1000000 to COLS, and then created enum { ROWS = 1000, COLS = 10000 };
(thereby reducing the problem size by a factor of 100). I made a few minor changes so it would compile cleanly under my preferred set of compilation options (nothing serious: static
in front of the functions, and the main array; file
becomes a local to main
; error check the fopen()
, etc.).
I then created a second copy and created an inline function to do the repeated calculation, (and a second one to do subscript calculations). This means that the monstrous expression is only written out once — which is highly desirable as it ensure consistency.
#include <stdio.h>
#define lambda 2.0
#define g 1.0
#define F0 1.0
#define h 0.1
#define e 0.00001
enum { ROWS = 1000, COLS = 10000 };
static double F[ROWS][COLS];
static void Inicio(double D[ROWS][COLS])
{
for (int i = 399; i < 600; i++) // Magic numbers!!
D[i][0] = F0;
}
enum { R = ROWS - 1 };
static inline int ko(int k, int n)
{
int rv = k + n;
if (rv >= R)
rv -= R;
else if (rv < 0)
rv += R;
return(rv);
}
static inline void calculate_value(int i, int k, double A[ROWS][COLS])
{
int ks2 = ko(k, -2);
int ks1 = ko(k, -1);
int kp1 = ko(k, +1);
int kp2 = ko(k, +2);
A[k][i] = A[k][i-1]
+ e/(h*h*h*h) * g*g * (A[kp2][i-1] - 4.0*A[kp1][i-1] + 6.0*A[k][i-1] - 4.0*A[ks1][i-1] + A[ks2][i-1])
+ 2.0*g*e/(h*h) * (A[kp1][i-1] - 2*A[k][i-1] + A[ks1][i-1])
+ e * A[k][i-1] * (lambda - A[k][i-1] * A[k][i-1]);
}
static void Iteration(double A[ROWS][COLS])
{
for (int i = 1; i < COLS; i++)
{
for (int k = 0; k < R; k++)
calculate_value(i, k, A);
A[999][i] = A[0][i];
}
}
int main(void)
{
FILE *file = fopen("P2.txt","wt");
if (file == 0)
return(1);
Inicio(F);
Iteration(F);
for (int i = 0; i < COLS; i++)
{
for (int j = 0; j < ROWS; j++)
{
fprintf(file,"%lf \t %.4f \t %lf\n", 1.0*j/10.0, 1.0*i, F[j][i]);
}
}
fclose(file);
return(0);
}
This program writes to P2.txt
instead of P1.txt
. I ran both programs and compared the output files; the output was identical. When I ran the programs on a mostly idle machine (MacBook Pro, 2.3 GHz Intel Core i7, 16 GiB 1333 MHz RAM, Mac OS X 10.7.5, GCC 4.7.1), I got reasonably but not wholly consistent timing:
Original Modified
6.334s 6.367s
6.241s 6.231s
6.315s 10.778s
6.378s 6.320s
6.388s 6.293s
6.285s 6.268s
6.387s 10.954s
6.377s 6.227s
8.888s 6.347s
6.304s 6.286s
6.258s 10.302s
6.975s 6.260s
6.663s 6.847s
6.359s 6.313s
6.344s 6.335s
7.762s 6.533s
6.310s 9.418s
8.972s 6.370s
6.383s 6.357s
However, almost all that time is spent on disk I/O. I reduced the disk I/O to just the very last row of data, so the outer I/O for
loop became:
for (int i = COLS - 1; i < COLS; i++)
the timings were vastly reduced and very much more consistent:
Original Modified
0.168s 0.165s
0.145s 0.165s
0.165s 0.166s
0.164s 0.163s
0.151s 0.151s
0.148s 0.153s
0.152s 0.171s
0.165s 0.165s
0.173s 0.176s
0.171s 0.165s
0.151s 0.169s
The simplification in the code from having the ghastly expression written out just once is very beneficial, it seems to me. I'd certainly far rather have to maintain that program than the original.
Shell have no built-in map like data structure, I use raw string to describe items like that:
ARRAY=(
"item_A|attr1|attr2|attr3"
"item_B|attr1|attr2|attr3"
"..."
)
when extract items and its attributes:
for item in "${ARRAY[@]}"
do
item_name=$(echo "${item}"|awk -F "|" '{print $1}')
item_attr1=$(echo "${item}"|awk -F "|" '{print $2}')
item_attr2=$(echo "${item}"|awk -F "|" '{print $3}')
echo "${item_name}"
echo "${item_attr1}"
echo "${item_attr2}"
done
This seems like not clever than other people's answer, but easy to understand for new people to shell.
It was windows permission issue i move the folder thats it inherit wrong permissions. When i move to wwwroot folder and add permission to iis user it start working fine.
Unfortunately, Dictionary has problems with Model Binding in MVC. Read the full story here. Instead, create a custom model binder to get the Dictionary as a parameter for the controller action.
To solve your requirement, here is the working solution -
First create your ViewModels in following way. PersonModel can have list of RoleModels.
public class PersonModel
{
public List<RoleModel> Roles { get; set; }
public string Name { get; set; }
}
public class RoleModel
{
public string RoleName { get; set;}
public string Description { get; set;}
}
Then have a index action which will be serving basic index view -
public ActionResult Index()
{
return View();
}
Index view will be having following JQuery AJAX POST operation -
<script src="~/Scripts/jquery-1.10.2.min.js"></script>
<script>
$(function () {
$('#click1').click(function (e) {
var jsonObject = {
"Name" : "Rami",
"Roles": [{ "RoleName": "Admin", "Description" : "Admin Role"}, { "RoleName": "User", "Description" : "User Role"}]
};
$.ajax({
url: "@Url.Action("AddUser")",
type: "POST",
data: JSON.stringify(jsonObject),
contentType: "application/json; charset=utf-8",
dataType: "json",
error: function (response) {
alert(response.responseText);
},
success: function (response) {
alert(response);
}
});
});
});
</script>
<input type="button" value="click1" id="click1" />
Index action posts to AddUser action -
[HttpPost]
public ActionResult AddUser(PersonModel model)
{
if (model != null)
{
return Json("Success");
}
else
{
return Json("An Error Has occoured");
}
}
So now when the post happens you can get all the posted data in the model parameter of action.
Update:
For asp.net core, to get JSON data as your action parameter you should add the [FromBody]
attribute before your param name in your controller action. Note: if you're using ASP.NET Core 2.1, you can also use the [ApiController]
attribute to automatically infer the [FromBody] binding source for your complex action method parameters. (Doc)
I am using ASP.NET MVC 4, and this what worked for me:
ControllerContext.Controller.ValueProvider.GetValue("controller").RawValue
ControllerContext.Controller.ValueProvider.GetValue("action").RawValue
Here are the steps:
Step 1: Create services running in background.
Step 2: You require following permission in Manifest file too:
android.permission.ACCESS_FINE_LOCATION
Step 3: Write code:
final LocationManager manager = (LocationManager)context.getSystemService (Context.LOCATION_SERVICE );
if ( !manager.isProviderEnabled( LocationManager.GPS_PROVIDER ) )
Toast.makeText(context, "GPS is disabled!", Toast.LENGTH_LONG).show();
else
Toast.makeText(context, "GPS is enabled!", Toast.LENGTH_LONG).show();
Step 4: Or simply you can check using:
LocationManager manager = (LocationManager) getSystemService(Context.LOCATION_SERVICE );
boolean statusOfGPS = manager.isProviderEnabled(LocationManager.GPS_PROVIDER);
Step 5: Run your services continuously to monitor connection.
JavaScript has both strict and type–converting comparisons. A strict comparison (e.g., ===
) is only true if the operands are of the same type. The more commonly used abstract comparison (e.g. ==
) converts the operands to the same Type before making the comparison.
The equality (==
) operator converts the operands if they are not of the same type, then applies strict comparison. If either operand is a number or a boolean, the operands are converted to numbers if possible; else if either operand is a string, the string operand is converted to a number if possible. If both operands are objects, then JavaScript compares internal references which are equal when operands refer to the same object in memory.
Syntax:
x == y
Examples:
3 == 3 // true
"3" == 3 // true
3 == '3' // true
The identity/strict equality(===
) operator returns true if the operands are strictly equal (see above) with no type conversion.
Syntax:
x === y
Examples:
3 === 3 // true
For reference: Comparison operators (Mozilla Developer Network)
Reassign owned didn't work for me as I was wanted to change tables owned by postgres.
I ended up using Alex's method, however I wanted to do this from within psql. The following was sufficient for me.
DO $$
DECLARE
rec record;
BEGIN
FOR rec in
SELECT *
FROM pg_tables
where schemaname = 'public'
LOOP
EXECUTE 'alter table ' || quote_ident(rec.tablename) || ' owner to new_owner';
END LOOP;
END
$$;
I had the *.pdb
files in the same folder and used the options from Arindam, but it still didn't work. Turns out I needed to enable Enable native code debugging which can be found under Project properties > Debug.
While a = 'foo' if True else 'bar'
is the more modern way of doing the ternary if statement (python 2.5+), a 1-to-1 equivalent of your version might be:
a = (b == True and "123" or "456" )
... which in python should be shortened to:
a = b is True and "123" or "456"
... or if you simply want to test the truthfulness of b's value in general...
a = b and "123" or "456"
? :
can literally be swapped out for and or
If you want a "const string" like your question says, I would really go for the version you stated in your question:
/* first version */
const char *HELLO2 = "Howdy";
Particularly, I would avoid:
/* second version */
const char HELLO2[] = "Howdy";
Reason: The problem with second version is that compiler will make a copy of the entire string "Howdy", PLUS that string is modifiable (so not really const).
On the other hand, first version is a const string accessible by const pointer HELLO2, and there is no way anybody can modify it.
It's probably faster and easier to use numpy.digitize()
:
import numpy
data = numpy.random.random(100)
bins = numpy.linspace(0, 1, 10)
digitized = numpy.digitize(data, bins)
bin_means = [data[digitized == i].mean() for i in range(1, len(bins))]
An alternative to this is to use numpy.histogram()
:
bin_means = (numpy.histogram(data, bins, weights=data)[0] /
numpy.histogram(data, bins)[0])
Try for yourself which one is faster... :)
You could subtract the current time stamp from 12 AM of the same day.
Using current timestamp:
moment().valueOf() - moment().startOf('day').valueOf()
Using arbitrary day:
moment(someDate).valueOf() - moment(someDate).startOf('day').valueOf()
If you want more control over how the conversion takes place, you can use ConvertAll:
var stringList = myList.ConvertAll(obj => obj.SomeToStringMethod());
This also works with nested dicts and makes sure that dicts which are appended later behave the same:
class DotDict(dict):
def __init__(self, *args, **kwargs):
super().__init__(*args, **kwargs)
# Recursively turn nested dicts into DotDicts
for key, value in self.items():
if type(value) is dict:
self[key] = DotDict(value)
def __setitem__(self, key, item):
if type(item) is dict:
item = DotDict(item)
super().__setitem__(key, item)
__setattr__ = __setitem__
__getattr__ = dict.__getitem__
As for your last question, here's the problem illustrated with a simple example:
Let's say that your list contains 5 elements: list = [1, 2, 3, 4, 5]
and your list of items to remove (i.e. the indices) is indices_to_remove = [0, 2, 4]
. In the first iteration of the loop you remove the item at index 0, so your list becomes list = [2, 3, 4, 5]
. In the second iteration, you remove the item at index 2, so your list becomes list = [2, 3, 5]
(as you can see, this removes the wrong element). Finally, in the third iteration, you try to remove the element at index 4, but the list only contains three elements, so you get an out of bounds exception.
Now that you see what the problem is, hopefully you will be able to come up with a solution. Good luck!
I tried subtract, but the result was not consistent.
If I run df1.subtract(df2)
, not all lines of df1 are shown on the result dataframe, probably due distinct
cited on the docs.
This solved my problem:
df1.exceptAll(df2)
As of 2019_10_10 I have NOT tested it, but there is the "GPU Ocelot" project
that according to its advertisement tries to compile CUDA code for a variety of targets, including AMD GPUs.
JsonConvert.SerializeObject(ObjectName, new JsonSerializerSettings(){
PreserveReferencesHandling = PreserveReferencesHandling.Objects,
Formatting = Formatting.Indented
});
It is very inefficient to store all values in memory, so the objects are reused and loaded one at a time. See this other SO question for a good explanation. Summary:
[...] when looping through the
Iterable
value list, each Object instance is re-used, so it only keeps one instance around at a given time.
I am just doing this without even trying it. Would this work?
myDiv = getElementById("myDiv");
myDiv.querySelectorAll(this.id + " > .foo");
Give it a try, maybe it works maybe not. Apolovies, but I am not on a computer now to try it (responding from my iPhone).
You want to use regex lookahead and lookbehind. This will give you only what is inside the curly braces:
(?<=\{)(.*?)(?=\})
There is a system function called ISNUMERIC for SQL 2008 and up. An example:
SELECT myCol
FROM mTable
WHERE ISNUMERIC(myCol)<> 1;
I did a couple of quick tests and also looked further into the docs:
ISNUMERIC returns 1 when the input expression evaluates to a valid numeric data type; otherwise it returns 0.
Which means it is fairly predictable for example
-9879210433
would pass but 987921-0433
does not.
$9879210433
would pass but 9879210$433
does not.
So using this information you can weed out based on the list of valid currency symbols and +
& -
characters.
If you will place your definitions in this order then the code will be compiled
class Ball;
class Player {
public:
void doSomething(Ball& ball);
private:
};
class Ball {
public:
Player& PlayerB;
float ballPosX = 800;
private:
};
void Player::doSomething(Ball& ball) {
ball.ballPosX += 10; // incomplete type error occurs here.
}
int main()
{
}
The definition of function doSomething requires the complete definition of class Ball because it access its data member.
In your code example module Player.cpp has no access to the definition of class Ball so the compiler issues an error.
The Right solution is to Change a property in XML under your Activity tag to below style. It just works
android:theme="@style/Theme.AppCompat.Light.NoActionBar"
Aggregated List of Libraries
The 'request' http package seems to have this feature:
https://github.com/mikeal/request
For example, the 'r' request object below uses localproxy to access its requests:
var r = request.defaults({'proxy':'http://localproxy.com'})
http.createServer(function (req, resp) {
if (req.url === '/doodle.png') {
r.get('http://google.com/doodle.png').pipe(resp)
}
})
Unfortunately there are no "global" defaults so that users of libs that use this cannot amend the proxy unless the lib pass through http options...
HTH, Chris
- FOR EF CORE - with using System.ComponentModel.DataAnnotations;
use [Column
(TypeName
= "decimal
(precision, scale)")]
Precision = Total number of characters used
Scale = Total number after the dot. (easy to get confused)
Example:
public class Blog
{
public int BlogId { get; set; }
[Column(TypeName = "varchar(200)")]
public string Url { get; set; }
[Column(TypeName = "decimal(5, 2)")]
public decimal Rating { get; set; }
}
More details here: https://docs.microsoft.com/en-us/ef/core/modeling/relational/data-types
If you really want to remove all of the repository, leaving only the working directory then it should be as simple as this.
rm -rf .git
The usual provisos about rm -rf
apply. Make sure you have an up to date backup and are absolutely sure that you're in the right place before running the command. etc., etc.
Also, VB.NET has much better xml parsing support via the compiler than C#. If you have the option and the desire, check it out.
WiX is the way to go for new installers. If WiX alone is too complicated or not flexible enough on the GUI side consider using SharpSetup - it allows you to create installer GUI in WinForms of WPF and has other nice features like translations, autoupdater, built-in prerequisites, improved autocompletion in VS and more.
(Disclaimer: I am the author of SharpSetup.)
Using the DISTINCT flag will remove duplicate rows.
SELECT DISTINCT
C.Content_ID,
C.Content_Title,
M.Media_Id
FROM tbl_Contents C
LEFT JOIN tbl_Media M ON M.Content_Id = C.Content_Id
ORDER BY C.Content_DatePublished ASC
I had the same problem but with a listView.... i solved it because i was using a wrong R.id.listView that list View needed to have a value, in my case it was strings that i saved on listView2... so the right code was R.id.listView2
In Retrofit2, When you want to send your parameters in raw you must use Scalars.
first add this in your gradle:
compile 'com.squareup.retrofit2:retrofit:2.3.0'
compile 'com.squareup.retrofit2:converter-gson:2.3.0'
compile 'com.squareup.retrofit2:converter-scalars:2.3.0'
public interface ApiInterface {
String URL_BASE = "http://10.157.102.22/rest/";
@Headers("Content-Type: application/json")
@POST("login")
Call<User> getUser(@Body String body);
}
my SampleActivity :
public class SampleActivity extends AppCompatActivity implements Callback<User> {
@Override
protected void onCreate(@Nullable Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_sample);
Retrofit retrofit = new Retrofit.Builder()
.baseUrl(ApiInterface.URL_BASE)
.addConverterFactory(ScalarsConverterFactory.create())
.addConverterFactory(GsonConverterFactory.create())
.build();
ApiInterface apiInterface = retrofit.create(ApiInterface.class);
// prepare call in Retrofit 2.0
try {
JSONObject paramObject = new JSONObject();
paramObject.put("email", "[email protected]");
paramObject.put("pass", "4384984938943");
Call<User> userCall = apiInterface.getUser(paramObject.toString());
userCall.enqueue(this);
} catch (JSONException e) {
e.printStackTrace();
}
}
@Override
public void onResponse(Call<User> call, Response<User> response) {
}
@Override
public void onFailure(Call<User> call, Throwable t) {
}
}
Reference: [How to POST raw whole JSON in the body of a Retrofit request?
Using button.titleLabel.frame.size.width
works fine only as long the label is short enough not to be truncated. When the label text gets truncated positioning doesn't work though. Taking
CGSize titleSize = [[[button titleLabel] text] sizeWithFont:[[button titleLabel] font]];
works for me even when the label text is truncated.
Even if it is really discouraged to use merge cells in Excel (use Center Across Selection
for instance if needed), the cell that "contains" the value is the one on the top left (at least, that's a way to express it).
Hence, you can get the value of merged cells in range B4:B11
in several ways:
Range("B4").Value
Range("B4:B11").Cells(1).Value
Range("B4:B11").Cells(1,1).Value
You can also note that all the other cells have no value in them. While debugging, you can see that the value is empty
.
Also note that Range("B4:B11").Value
won't work (raises an execution error number 13 if you try to Debug.Print
it) because it returns an array.
The answer posted above/earlier that was reported to replace CHAR(13)CHAR(10) carriage return:
REPLACE(REPLACE(REPLACE(MyField, CHAR(13) + CHAR(10), 'something else'), CHAR(13), 'something else'), CHAR(10), 'something else')
Will never get to the REPLACE(MyField, CHAR(13) + CHAR(10), 'something else')
portion of the code and will return the unwanted result of:
'something else''something else'
And NOT the desired result of a single:
'something else'
That would require the REPLACE script to be rewritten as such:
REPLACE(REPLACE(REPLACE(MyField, CHAR(10), 'something else'), CHAR(13), 'something else'), CHAR(13) + CHAR(10), 'something else')
As the flow first tests the 1st/Furthest Left REPLACE statement, then upon failure will continue to test the next REPLACE statement.
The quick and dirty way I use to export mysql output to a file is
$ mysql <database_name> --tee=<file_path>
and then use the exported output (which you can find in <file_path>
) wherever I want.
Note that this is the only way you have in order to avoid databases running using the secure-file-priv
option, which prevents the usage of INTO OUTFILE
suggested in the previous answers:
ERROR 1290 (HY000): The MySQL server is running with the --secure-file-priv option so it cannot execute this statement
nchar(as.character(q.data$string)) -nchar( gsub("a", "", q.data$string))
[1] 2 1 0
Notice that I coerce the factor variable to character, before passing to nchar. The regex functions appear to do that internally.
Here's benchmark results (with a scaled up size of the test to 3000 rows)
q.data<-q.data[rep(1:NROW(q.data), 1000),]
str(q.data)
'data.frame': 3000 obs. of 3 variables:
$ number : int 1 2 3 1 2 3 1 2 3 1 ...
$ string : Factor w/ 3 levels "greatgreat","magic",..: 1 2 3 1 2 3 1 2 3 1 ...
$ number.of.a: int 2 1 0 2 1 0 2 1 0 2 ...
benchmark( Dason = { q.data$number.of.a <- str_count(as.character(q.data$string), "a") },
Tim = {resT <- sapply(as.character(q.data$string), function(x, letter = "a"){
sum(unlist(strsplit(x, split = "")) == letter) }) },
DWin = {resW <- nchar(as.character(q.data$string)) -nchar( gsub("a", "", q.data$string))},
Josh = {x <- sapply(regmatches(q.data$string, gregexpr("g",q.data$string )), length)}, replications=100)
#-----------------------
test replications elapsed relative user.self sys.self user.child sys.child
1 Dason 100 4.173 9.959427 2.985 1.204 0 0
3 DWin 100 0.419 1.000000 0.417 0.003 0 0
4 Josh 100 18.635 44.474940 17.883 0.827 0 0
2 Tim 100 3.705 8.842482 3.646 0.072 0 0
jQuery's .bind() fires in the order it was bound:
When an event reaches an element, all handlers bound to that event type for the element are fired. If there are multiple handlers registered, they will always execute in the order in which they were bound. After all handlers have executed, the event continues along the normal event propagation path.
Source: http://api.jquery.com/bind/
Because jQuery's other functions (ex. .click()
) are shortcuts for .bind('click', handler)
, I would guess that they are also triggered in the order they are bound.
What worked for me was this lazy approach, not algorithmically lazy ;)
if( JSON.stringify(object_name).indexOf("key_name") > -1 ) {
console.log("Key Found");
}
else{
console.log("Key not Found");
}
Better analogy than the telephone call: Ordering products via postal mail from a mail-order service. The WSDL document is like the instructions that explain how to create the kind of order forms that the service provider will accept. A SOAP message is like an envelope with a standard design (size, shape, construction) that every post office around the world knows how to handle. You put your order form into such an envelope. The network (e.g. the internet) is the postal service. You put your envelope into the mail. The employees of the postal service do not look inside the envelope. The payload XML is the order form that you have enclosed in the envelope. After the post office delivers the envelope, the web service provider opens the envelope and processes the order form. If you have created and filled out the form correctly, they will mail the product that you ordered back to you.
You can add these style's and it works just as expected.
.btn {
white-space:normal !important;
word-wrap: break-word;
word-break: normal;
}
The lscpu(1)
command provided by the util-linux project might also be useful:
$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 2
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 58
Model name: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz
Stepping: 9
CPU MHz: 3406.253
CPU max MHz: 3600.0000
CPU min MHz: 1200.0000
BogoMIPS: 5787.10
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 4096K
NUMA node0 CPU(s): 0-3
If it’s there, they’ll take it all.
The IRS matches with this regex: .*
$50,000
This will match everything!
See here for an example: Greedy-example
If I ask for a tax refund, the IRS sudden becomes non-greedy, and they use this quantifier:
(.{2,5}?)([0-9]*)
against this input: $50,000
The first group is non-needy and only matches $5
– so I get a $5
refund against the $50,000 input. They're non-greedy. They take as little as possible.
See here: Non-greedy-example.
It becomes important if you are trying to match certain parts of an expression. Sometimes you don't want to match everything.
Hopefully that analogy will help you remember!
I don't know what things were like in the alpha, but I'm using beta 12 right now and this works fine. If you have an array of objects, create a select like this:
<select [(ngModel)]="simpleValue"> // value is a string or number
<option *ngFor="let obj of objArray" [value]="obj.value">{{obj.name}}</option>
</select>
If you want to match on the actual object, I'd do it like this:
<select [(ngModel)]="objValue"> // value is an object
<option *ngFor="let obj of objArray" [ngValue]="obj">{{obj.name}}</option>
</select>
Here's an alternative following the last answer
declare @t tinyint,@v tinyint
set @t=23
set @v=232
Select replace(str(@t,4),' ','0'),replace(str(@t,5),' ','0')
This will work on any number and by varying the length of the str()
function you can stipulate how many leading zeros you require. Provided of course that your string length is always >= maximum number of digits your number type can hold.
This may or may not help you address your problem, OP, but to get the timezone of the current server relative to UTC (UT1, technically), do:
SELECT EXTRACT(TIMEZONE FROM now())/3600.0;
The above works by extracting the UT1-relative offset in minutes, and then converting it to hours using the factor of 3600 secs/hour.
Example:
SET SESSION timezone TO 'Asia/Kabul';
SELECT EXTRACT(TIMEZONE FROM now())/3600.0;
-- output: 4.5 (as of the writing of this post)
(docs).
function _arrayBufferToBase64(uarr) {
var strings = [], chunksize = 0xffff;
var len = uarr.length;
for (var i = 0; i * chunksize < len; i++){
strings.push(String.fromCharCode.apply(null, uarr.subarray(i * chunksize, (i + 1) * chunksize)));
}
return strings.join("");
}
This is better, if you use JSZip for unpack archive from string
Simplest example to making any function in jQuery is
jQuery.fn.extend({
exists: function() { return this.length }
});
if($(selector).exists()){/*do something here*/}
Oh! just read comments in question, dear I missed it. but just letting the answer be here in case it can be useful to some other person
I tried "Ctrl+C" and "Ctrl+ Break" none worked. I was using SQL Plus that came with Oracle Client 10.2.0.1.0. SQL Plus is used by most as client for connecting with Oracle DB. I used the Cancel, option under File menu and it stopped the execution!
Once you click File wait for few mins then the select command halts and menu appears click on Cancel.
Margin: 0 auto; is the correct answer for horizontal centering only. For centering both ways something like this will work, using jquery:
var cenBtn = function() {
var W = $(window).width();
var H = $(window).height();
var BtnW = insert button width;
var BtnH = insert button height;
var LeftOff = (W / 2) - (BtnW / 2);
var TopOff = (H / 2) - (BtnH /2);
$("#buttonID").css({left: LeftOff, top: TopOff});
};
$(window).bind("load, resize", cenBtn);
Update ... five years later, one could use flexbox on the parent DIV element to easily center the button both horizontally and vertically.
Including all browser prefixes, for best support
div {
display: -webkit-box;
display: -moz-box;
display: -ms-flexbox;
display: -webkit-flex;
display: flex;
-webkit-box-align : center;
-moz-box-align : center;
-ms-flex-align : center;
-webkit-align-items : center;
align-items : center ;
justify-content : center;
-webkit-justify-content : center;
-webkit-box-pack : center;
-moz-box-pack : center;
-ms-flex-pack : center;
}
#container {_x000D_
position: relative;_x000D_
margin: 20px;_x000D_
background: red;_x000D_
height: 300px;_x000D_
width: 400px;_x000D_
}_x000D_
_x000D_
#container div {_x000D_
display: -webkit-box;_x000D_
display: -moz-box;_x000D_
display: -ms-flexbox;_x000D_
display: -webkit-flex;_x000D_
display: flex;_x000D_
-webkit-box-align: center;_x000D_
-moz-box-align: center;_x000D_
-ms-flex-align: center;_x000D_
-webkit-align-items: center;_x000D_
align-items: center;_x000D_
justify-content: center;_x000D_
-webkit-box-pack: center;_x000D_
-moz-box-pack: center;_x000D_
-ms-flex-pack: center;_x000D_
-webkit-justify-content: center;_x000D_
justify-content: center;_x000D_
}
_x000D_
<!-- using a container to make the 100% width and height mean something -->_x000D_
<div id="container"> _x000D_
<div style="width:100%; height:100%">_x000D_
<button type="button">hello</button>_x000D_
</div>_x000D_
</div>
_x000D_
Please, do not override Router Outlet! It's a nightmare with latest router release (3.0 beta).
Instead use the interfaces CanActivate and CanDeactivate and set the class as canActivate / canDeactivate in your route definition.
Like that:
{ path: '', component: Component, canActivate: [AuthGuard] },
Class:
@Injectable()
export class AuthGuard implements CanActivate {
constructor(protected router: Router, protected authService: AuthService)
{
}
canActivate(route: ActivatedRouteSnapshot, state: RouterStateSnapshot): Observable<boolean> | boolean {
if (state.url !== '/login' && !this.authService.isAuthenticated()) {
this.router.navigate(['/login']);
return false;
}
return true;
}
}
See also: https://angular.io/docs/ts/latest/guide/router.html#!#can-activate-guard
Main page
<a href="/sample.htm#page1">page1</a>
<a href="/sample.htm#page2">page2</a>
sample pages
<div id='page1'><a name="page1"></a></div>
<div id='page2'><a name="page2"></a></div>
This a terrible thing! It costs my a few hours! this is my table rows :
private String USER_ID = "user_id";
private String REMEMBER_UN = "remember_un";
private String REMEMBER_PWD = "remember_pwd";
private String HEAD_URL = "head_url";
private String USER_NAME = "user_name";
private String USER_PPU = "user_ppu";
private String CURRENT_TIME = "current_time";
Cursor c = db.rawQuery("SELECT * FROM " + TABLE +" ORDER BY " + CURRENT_TIME + " DESC",null);
Every time when I update the table , I will update the CURRENT_TIME for sort. But I found that it is not work.The result is not sorted what I want. Finally, I found that, the column "current_time" is the default row of sqlite.
The solution is, rename the column "cur_time" instead of "current_time".
This is code for the convert PX to SP format. 100% Works
view.setTextSize(TypedValue.COMPLEX_UNIT_PX, 24);
const keys = Array(n).keys();
[...Array.from(keys)].forEach(callback);
in Typescript
Be carefull when you use derived query for batch delete. It isn't what you expect: DeleteExecution
The pdf2image library can be used.
You can install it simply using,
pip install pdf2image
Once installed you can use following code to get images.
from pdf2image import convert_from_path
pages = convert_from_path('pdf_file', 500)
Saving pages in jpeg format
for page in pages:
page.save('out.jpg', 'JPEG')
Edit: the Github repo pdf2image also mentions that it uses pdftoppm
and that it requires other installations:
pdftoppm is the piece of software that does the actual magic. It is distributed as part of a greater package called poppler. Windows users will have to install poppler for Windows. Mac users will have to install poppler for Mac. Linux users will have pdftoppm pre-installed with the distro (Tested on Ubuntu and Archlinux) if it's not, run
sudo apt install poppler-utils
.
You can install the latest version under Windows using anaconda by doing:
conda install -c conda-forge poppler
note: Windows versions upto 0.67 are available at http://blog.alivate.com.au/poppler-windows/ but note that 0.68 was released in Aug 2018 so you'll not be getting the latest features or bug fixes.
If you're using Bootstrap 4:
<form class="d-flex">
<label for="myInput" class="align-items-center">Sample label</label>
<input type="text" id="myInput" placeholder="Sample Input" class="flex-grow-1"/>
</form>
Better yet, use what's built into Bootstrap:
<form>
<div class="input-group">
<div class="input-group-prepend">
<label for="myInput" class="input-group-text">Default</label>
</div>
<input type="text" class="form-control" id="myInput">
</div>
</form>
May help to someone:
I'm sending data from react
application to golang
server.
Once I change this, w.Header().Set("Access-Control-Allow-Origin", "*")
. Error has fixed.
React form submit function:
async handleSubmit(e) {
e.preventDefault();
const headers = {
'Content-Type': 'text/plain'
};
await axios.post(
'http://localhost:3001/login',
{
user_name: this.state.user_name,
password: this.state.password,
},
{headers}
).then(response => {
console.log("Success ========>", response);
})
.catch(error => {
console.log("Error ========>", error);
}
)
}
Go server got Router,
func main() {
router := mux.NewRouter()
router.HandleFunc("/login", Login.Login).Methods("POST")
log.Fatal(http.ListenAndServe(":3001", router))
}
Login.go,
func Login(w http.ResponseWriter, r *http.Request) {
var user = Models.User{}
data, err := ioutil.ReadAll(r.Body)
if err == nil {
err := json.Unmarshal(data, &user)
if err == nil {
user = Postgres.GetUser(user.UserName, user.Password)
w.Header().Set("Access-Control-Allow-Origin", "*")
json.NewEncoder(w).Encode(user)
}
}
}
Other people have suggested using in.nextLine()
to clear the buffer, which works for single-line input. As comments point out, however, sometimes System.in input can be multi-line.
You can instead create a new Scanner object where you want to clear the buffer if you are using System.in and not some other InputStream.
in = new Scanner(System.in);
If you do this, don't call in.close()
first. Doing so will close System.in, and so you will get NoSuchElementExceptions on subsequent calls to in.nextInt();
System.in probably shouldn't be closed during your program.
(The above approach is specific to System.in. It might not be appropriate for other input streams.)
If you really need to close your Scanner object before creating a new one, this StackOverflow answer suggests creating an InputStream wrapper for System.in that has its own close() method that doesn't close the wrapped System.in stream. This is overkill for simple programs, though.
You cannot in pure CSS. Having an image covering the whole page behind all other components is probably your best bet (looks like that's the solution given above). Anyway, chances are it will look awful anyway. I would try either an image big enough to cover most screen resolutions (say up to 1600x1200, above it is scarcer), to limit the width of the page, or just to use an image that tile.
Here's a regular expression which might fit the bill (it's very long):
/^(?:\u0066\u0069\u006C\u0065\u003A\u002F{2}(?:\u002F{2}(?:(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])*\u0040)?(?:\u005B(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){6}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|\u003A{2}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){5}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){4}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A)?[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){3}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){0,2}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){2}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){0,3}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){0,4}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){0,5}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){0,6}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2})\u005D|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])|(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039](?:(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D]+)?[\u0041-\u005A\u0061-\u007A\u0030-\u0039])?|(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039](?:(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D]+)?[\u0041-\u005A\u0061-\u007A\u0030-\u0039])?\u002E)+[\u0041-\u005A\u0061-\u007A\u0030-\u0039](?:(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D]+)?[\u0041-\u005A\u0061-\u007A\u0030-\u0039])?))(?:\u003A(?:\u0030-\u0035\u0030-\u0039{0,4}|\u0036\u0030-\u0034\u0030-\u0039{3}|\u0036\u0035\u0030-\u0034\u0030-\u0039{2}|\u0036\u0035\u0035\u0030-\u0032\u0030-\u0039|\u0036\u0035\u0035\u0033\u0030-\u0035))?(?:\u002F(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D\u003A\u0040]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])*)*|\u002F(?:(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D\u003A\u0040]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])+(?:\u002F(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D\u003A\u0040]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])*)*)?|(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D\u003A\u0040]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])+(?:\u002F(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D\u003A\u0040]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])*)*)|[\u0041-\u005A\u0061-\u007A][\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002B\u002D\u002E]*\u003A(?:\u002F{2}(?:(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])*\u0040)?(?:\u005B(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){6}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|\u003A{2}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){5}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){4}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A)?[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){3}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){0,2}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){2}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){0,3}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){0,4}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2}(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035]))|(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){0,5}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}|(?:(?:[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4}\u003A){0,6}[\u0030-\u0039\u0041-\u0046\u0061-\u0066]{1,4})?\u003A{2})\u005D|(?:(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])\u002E){3}(?:[\u0030-\u0039]|[\u0031-\u0039][\u0030-\u0039]|\u0031[\u0030-\u0039]{2}|\u0032[\u0030-\u0034][\u0030-\u0039]|\u0032\u0035[\u0030-\u0035])|(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039](?:(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D]+)?[\u0041-\u005A\u0061-\u007A\u0030-\u0039])?|(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039](?:(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D]+)?[\u0041-\u005A\u0061-\u007A\u0030-\u0039])?\u002E)+[\u0041-\u005A\u0061-\u007A\u0030-\u0039](?:(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D]+)?[\u0041-\u005A\u0061-\u007A\u0030-\u0039])?))(?:\u003A(?:\u0030-\u0035\u0030-\u0039{0,4}|\u0036\u0030-\u0034\u0030-\u0039{3}|\u0036\u0035\u0030-\u0034\u0030-\u0039{2}|\u0036\u0035\u0035\u0030-\u0032\u0030-\u0039|\u0036\u0035\u0035\u0033\u0030-\u0035))?(?:\u002F(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D\u003A\u0040]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])*)*|\u002F(?:(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D\u003A\u0040]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])+(?:\u002F(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D\u003A\u0040]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])*)*)?|(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D\u003A\u0040]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])+(?:\u002F(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D\u003A\u0040]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])*)*)(?:\u003F(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D\u003A\u0040\u002F\u003F]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])*)?(?:\u0023(?:[\u0041-\u005A\u0061-\u007A\u0030-\u0039\u002D\u002E\u005F\u007E\u0021\u0024\u0026\u0027\u0028\u0029\u002A\u002B\u002C\u003B\u003D\u003A\u0040\u002F\u003F]|\u0025[\u0030-\u0039\u0041-\u0046\u0061-\u0066][\u0030-\u0039\u0041-\u0046\u0061-\u0066])*)?)$/
There are some caveats to its usage, namely it does not validate URIs which contain additional information after the user name (e.g. "username:password"). Also, only IPv6 addresses can be contained within the IP literal syntax and the "IPvFuture" syntax is currently ignored and will not validate against this regular expression. Port numbers are also constrained to be between 0 and 65,535. Also, only the file scheme can use triple slashes (e.g. "file:///etc/sysconfig") and can ignore both the query and fragment parts of a URI. Finally, it is geared towards regular URIs and not IRIs, hence the extensive focus on the ASCII character set.
This regular expression could be expanded upon, but it's already complex and long enough as it is. I also cannot guarantee it's going to be "100% accurate" or "bug free", but it should correctly validate URIs for all schemes.
You will need to do additional verification for any scheme-specific requirements or do URI normalization as this regular expression will validate a very broad range of URIs.
explain: 1.the first one declare the variable in array.
2.the second array_push method is used to push the string in the array variable.
3.finally it will print the result.
4.the second method is directly store the string in the array.
5.the data is printed in the array values in using print_r method.
this two are same
Just add the font awesome class like this:
class="fa fa-plus-circle fa-3x"
(You can increase the size as per 5x, 7x, 9x..)
You can also add custom CSS.
The difference between pointers and references is quite simple: a pointer can be null, a reference can not.
Examine your API, if it makes sense for null to be able to be returned, possibly to indicate an error, use a pointer, otherwise use a reference. If you do use a pointer, you should add checks to see if it's null (and such checks may slow down your code).
Here it looks like references are more appropriate.
Just my 2 cents. I would create a solution which records exactly what changed, very similar to transient's solution.
My ChangesTable would simple be:
DateTime | WhoChanged | TableName | Action | ID |FieldName | OldValue
1) When an entire row is changed in the main table, lots of entries will go into this table, BUT that is very unlikely, so not a big problem (people are usually only changing one thing) 2) OldVaue (and NewValue if you want) have to be some sort of epic "anytype" since it could be any data, there might be a way to do this with RAW types or just using JSON strings to convert in and out.
Minimum data usage, stores everything you need and can be used for all tables at once. I'm researching this myself right now, but this might end up being the way I go.
For Create and Delete, just the row ID, no fields needed. On delete a flag on the main table (active?) would be good.
In the schema you have in your question, child1
or child2
can appear in any order, any number of times. So this sounds like what you are looking for.
Edit: if you wanted only one of them to appear an unlimited number of times, the unbounded would have to go on the elements instead:
Edit: Fixed type in XML.
Edit: Capitalised O in maxOccurs
<xs:element name="foo">
<xs:complexType>
<xs:choice maxOccurs="unbounded">
<xs:element name="child1" type="xs:int" maxOccurs="unbounded"/>
<xs:element name="child2" type="xs:string" maxOccurs="unbounded"/>
</xs:choice>
</xs:complexType>
</xs:element>
I couldn't get it to work with a hardware device. I kept getting the same error, but...
For your emulator you have to choose the IntelX86 Atom System image. Then ADB will connect to your emulator and it will properly install the installDebug.apk.
This is what I had to do.
Also look at this tutorial. It helped me immensely.
As .Net progresses, so does their ability to add new 32-bit configurations that trips everyone up it seems.
If you are on .Net Framework 4.7.2 do the following:
Go to Project Properties
Build
Uncheck 'prefer 32-bit'
Cheers!
START_STICKY
: It will restart the service in case if it terminated and the Intent data which is passed to the onStartCommand()
method is NULL
. This is suitable for the service which are not executing commands but running independently and waiting for the job.START_NOT_STICKY
: It will not restart the service and it is useful for the services which will run periodically. The service will restart only when there are a pending startService()
calls. It’s the best option to avoid running a service in case if it is not necessary.START_REDELIVER_INTENT
: It’s same as STAR_STICKY
and it recreates the service, call onStartCommand()
with last intent that was delivered to the service.You can use input text with "list" attribute, which refers to the datalist of values.
<input type="text" name="city" list="cityname">_x000D_
<datalist id="cityname">_x000D_
<option value="Boston">_x000D_
<option value="Cambridge">_x000D_
</datalist>
_x000D_
This creates a free text input field that also has a drop-down to select predefined choices. Attribution for example and more information: https://www.w3.org/wiki/HTML/Elements/datalist
Trace.WriteLine
should work provided you select the correct output (the dropdown labeled with "Show output from" found in the Output window).
You can use the below code to generate a random number that will always be 6 digits:
Math.random().toString().substr(2, 6)
Hope this works for everyone :)
Briefly how this works is Math.random()
generates a random number between 0 and 1 which we convert to a string and using .toString()
and take a 6 digit sample from said string using .substr()
with the parameters 2, 6
to start the sample from the 2nd char and continue it for 6 characters.
This can be used for any length number.
If you want to do more reading on this here are some links to the docs to save you some googling:
Math.random()
: https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Math/random
.toString()
: https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Object/toString
.substr()
: https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/String/substr
Since Python 3.5, subprocess.run() is recommended over subprocess.check_output():
>>> int(subprocess.run(["pidof", "-s", "your_process"], stdout=subprocess.PIPE).stdout)
Also, since Python 3.7, you can use the capture_output=true
parameter to capture stdout and stderr:
>>> int(subprocess.run(["pidof", "-s", "your process"], capture_output=True).stdout)
printf("price: %d, %f",temp,ftemp);
^^^
This is your problem. Since the arguments are type double
and float
, you should be using %f
for both (since printf
is a variadic function, ftemp
will be promoted to double
).
%d
expects the corresponding argument to be type int
, not double
.
Variadic functions like printf
don't really know the types of the arguments in the variable argument list; you have to tell it with the conversion specifier. Since you told printf
that the first argument is supposed to be an int
, printf will take the next sizeof (int)
bytes from the argument list and interpret it as an integer value; hence the first garbage number.
Now, it's almost guaranteed that sizeof (int)
< sizeof (double)
, so when printf
takes the next sizeof (double)
bytes from the argument list, it's probably starting with the middle byte of temp
, rather than the first byte of ftemp
; hence the second garbage number.
Use %f
for both.
// variable declaration
TextToSpeech tts;
// TextToSpeech initialization, must go within the onCreate method
tts = new TextToSpeech(getActivity(), new TextToSpeech.OnInitListener() {
@Override
public void onInit(int i) {
if (i == TextToSpeech.SUCCESS) {
int result = tts.setLanguage(Locale.US);
if (result == TextToSpeech.LANG_MISSING_DATA ||
result == TextToSpeech.LANG_NOT_SUPPORTED) {
Log.e("TTS", "Lenguage not supported");
}
} else {
Log.e("TTS", "Initialization failed");
}
}
});
// method call
public void buttonSpeak().setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View view) {
speak();
}
});
}
private void speak() {
tts.speak("Text to Speech Test", TextToSpeech.QUEUE_ADD, null);
}
@Override
public void onDestroy() {
if (tts != null) {
tts.stop();
tts.shutdown();
}
super.onDestroy();
}
taken from: Text to Speech Youtube Tutorial
It should be quite simple if you are using LogBack or SLF4J. I do it as below
//imports
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
//Initialize logger
Logger logger = LoggerFactory.getLogger(<classname>.class);
try {
//try something
} catch(Exception e){
//Actual logging of error
logger.error("some message", e);
}
It doesn't sound like a good idea to use send message. I think you should try to work around the problem that the DLLs can't reference each other...
pip
for installation of packages in Python 3Step 1: Install Python 3. Yes, by default an application file pip3.exe
is already located there in the path (E.g.
):
C:/Users/name/AppData/Local/Programs/Python/Python36-32/Scripts
Step 2: Go to
>Control Panel (Local Machine) > System > Advanced system settings >
>Click on `Environment Variables` >
Set a New User Variable, for this click `New` >
Write new 'Variable name' as "PYTHON_SCRIPTS" >
Copy that path of `pip3.exe` and paste within variable value > `OK` >
>Below again find out and click on `Path` under 'system variables' >
Edit this path >
Within 'Variable value' append and paste the same path of `pip3.exe` after putting a ';' >
Click `OK`/`Apply` and come out.
Step 3: Now, open cmd
bash/shell by Pressing key Windows+R
.
> Write 'pip3' and press 'Enter'. If pip3 is recognized you can go ahead.
Step 4: In this same cmd
> Write path of the `pip3.exe` followed by `/pip install 'package name'`
As Example just write:
C:/Users/name/AppData/Local/Programs/Python/Python36-32/Scripts/pip install matplotlib
Press Enter
now. The Package matplotlib
will start getting downloaded.
Further, for upgrading any package
Open cmd
bash/shell again, then
type that path of
pip3.exe
followed by/pip install --upgrade 'package name'
PressEnter
.
As Example just write:
C:/Users/name/AppData/Local/Programs/Python/Python36-32/Scripts/pip install --upgrade matplotlib
Upgrading of the package will start
:)
in python 2.x, xrange is used to return a generator while range is used to return a list. In python 3.x , xrange has been removed and range returns a generator just like xrange in python 2.x. Therefore, in python 3.x you need to use range rather than xrange.
You can use hasOwnProperty()
as well as in
operator.
I have found that using ._getexif
doesn't work in higher python versions, moreover, it is a protected class and one should avoid using it if possible.
After digging around the debugger this is what I found to be the best way to get the EXIF data for an image:
from PIL import Image
def get_exif(path):
return Image.open(path).info['parsed_exif']
This returns a dictionary of all the EXIF data of an image.
Note: For Python3.x use Pillow instead of PIL
This is a fix for people who are not using maven. You also need to add standard.jar
to your lib folder for the core tag library to work. Works for jstl version 1.1.
<%@taglib prefix="core" uri="http://java.sun.com/jsp/jstl/core"%>
$langs = Language::all()->toArray();
return View::make('NAATIMockTest.Admin.Language.index', [
'langs' => $langs
]);
then in view
<script type="text/javascript">
var langs = {{json_encode($langs)}};
console.log(langs);
</script>
Its not pretty tho
If you're in local machine then use this command
/usr/local/mysql/bin/mysqldump -h127.0.0.1 --port = 3306 -u [username] -p [password] --databases [db_name] --tables [tablename] > /to/path/tablename.sql;
For remote machine, use below one
/usr/local/mysql/bin/mysqldump -h [remoteip] --port = 3306 -u [username] -p [password] --databases [db_name] --tables [tablename] > /to/path/tablename.sql;
On Selenium >= 3.41 (C#) the rigth syntax is:
webDriver = webDriver.SwitchTo().Frame(webDriver.FindElement(By.Name("icontent")));
.val()
does not return an array from a DOM element: $('#fruit')
is going to find the element in the document with an ID of #fruit and get its value (if it has a value).
I agree with the answer from zacherates.
But what you can do is to call intern()
on your non-literal strings.
From zacherates example:
// ... but they are not the same object
new String("test") == "test" ==> false
If you intern the non-literal String equality is true
:
new String("test").intern() == "test" ==> true
If you are solely interested in outputting the JSON somewhere in your HTML, you could also use a pipe inside an interpolation. For example:
<p> {{ product | json }} </p>
I am not entirely sure it works for every AngularJS version, but it works perfectly in my Ionic App (which uses Angular 2+).
Since this answer still gets voted up, I want to point out that you should almost never need to look in the header files. If you want to write reliable code, you're much better served by looking in the standard. A better question than "how is off_t
defined on my machine" is "how is off_t
defined by the standard?". Following the standard means that your code will work today and tomorrow, on any machine.
In this case, off_t
isn't defined by the C standard. It's part of the POSIX standard, which you can browse here.
Unfortunately, off_t
isn't very rigorously defined. All I could find to define it is on the page on sys/types.h
:
blkcnt_t
andoff_t
shall be signed integer types.
This means that you can't be sure how big it is. If you're using GNU C, you can use the instructions in the answer below to ensure that it's 64 bits. Or better, you can convert to a standards defined size before putting it on the wire. This is how projects like Google's Protocol Buffers work (although that is a C++ project).
So, I think "where do I find the definition in my header files" isn't the best question. But, for completeness here's the answer:
On my machine (and most machines using glibc) you'll find the definition in bits/types.h
(as a comment says at the top, never directly include this file), but it's obscured a bit in a bunch of macros. An alternative to trying to unravel them is to look at the preprocessor output:
#include <stdio.h>
#include <sys/types.h>
int main(void) {
off_t blah;
return 0;
}
And then:
$ gcc -E sizes.c | grep __off_t
typedef long int __off_t;
....
However, if you want to know the size of something, you can always use the sizeof()
operator.
Edit: Just saw the part of your question about the __
. This answer has a good discussion. The key point is that names starting with __
are reserved for the implementation (so you shouldn't start your own definitions with __
).
The problem is with sprintf
sprintf(aa,"%lf",a);
%lf says to interpet "a" as a "long double" (16 bytes) but it is actually a "double" (8 bytes). Use this instead:
sprintf(aa, "%f", a);
More details here on cplusplus.com
I had the same issue earlier, but my situation was a bit different in the front-end. I'll share my scenario anyway, maybe someone might find it useful.
I had an api call to /api/user/register
in the frontend with email, password and username as request body. On submitting the form(register form), a handler function is called which initiates the fetch call to /api/user/register
. I used the event.preventDefault()
in the beginning line of this handler function, all other lines,like forming the request body as well the fetch call was written after the event.preventDefault()
. This returned a pending promise
.
But when I put the request body formation code above the event.preventDefault()
, it returned the real promise. Like this:
event.preventDefault();
const data = {
'email': email,
'password': password
}
fetch(...)
...
instead of :
const data = {
'email': email,
'password': password
}
event.preventDefault();
fetch(...)
...
This is the error free and best way to add dynamic splash screen in Flutter.
MAIN.DART
import 'package:flutter/material.dart';
import 'constant.dart';
void main() => runApp(MaterialApp(
title: 'GridView Demo',
home: SplashScreen(),
theme: ThemeData(
primarySwatch: Colors.red,
accentColor: Color(0xFF761322),
),
routes: <String, WidgetBuilder>{
SPLASH_SCREEN: (BuildContext context) => SplashScreen(),
HOME_SCREEN: (BuildContext context) => BasicTable(),
//GRID_ITEM_DETAILS_SCREEN: (BuildContext context) => GridItemDetails(),
},
));
SPLASHSCREEN.DART
import 'dart:async';
import 'package:flutter/cupertino.dart';
import 'package:flutter/material.dart';
import 'package:app_example/constants.dart';
class SplashScreen extends StatefulWidget {
@override
SplashScreenState createState() => new SplashScreenState();
}
class SplashScreenState extends State<SplashScreen>
with SingleTickerProviderStateMixin {
var _visible = true;
AnimationController animationController;
Animation<double> animation;
startTime() async {
var _duration = new Duration(seconds: 3);
return new Timer(_duration, navigationPage);
}
void navigationPage() {
Navigator.of(context).pushReplacementNamed(HOME_SCREEN);
}
@override
dispose() {
animationController.dispose();
super.dispose();
}
@override
void initState() {
super.initState();
animationController = new AnimationController(
vsync: this,
duration: new Duration(seconds: 2),
);
animation =
new CurvedAnimation(parent: animationController, curve: Curves.easeOut);
animation.addListener(() => this.setState(() {}));
animationController.forward();
setState(() {
_visible = !_visible;
});
startTime();
}
@override
Widget build(BuildContext context) {
return Scaffold(
body: Stack(
fit: StackFit.expand,
children: <Widget>[
new Column(
mainAxisAlignment: MainAxisAlignment.end,
mainAxisSize: MainAxisSize.min,
children: <Widget>[
Padding(
padding: EdgeInsets.only(bottom: 30.0),
child: new Image.asset(
'assets/images/powered_by.png',
height: 25.0,
fit: BoxFit.scaleDown,
),
)
],
),
new Column(
mainAxisAlignment: MainAxisAlignment.center,
children: <Widget>[
new Image.asset(
'assets/images/logo.png',
width: animation.value * 250,
height: animation.value * 250,
),
],
),
],
),
);
}
}
CONSTANTS.DART
String SPLASH_SCREEN='SPLASH_SCREEN';
String HOME_SCREEN='HOME_SCREEN';
HOMESCREEN.DART
import 'package:flutter/material.dart';
class BasicTable extends StatelessWidget {
@override
Widget build(BuildContext context) {
return Scaffold(
appBar: AppBar(title: Text("Table Widget")),
body: Center(child: Text("Table Widget")),
);
}
}
One very small nit to pick:
The RFC for email addresses allows the first part to include an "@" sign if it is quoted. Example:
"john@work"@myemployer.com
This is quite uncommon, but could happen. Theoretically, you should split on the last "@" symbol, not the first:
SELECT LEN(EmailField) - CHARINDEX('@', REVERSE(EmailField)) + 1
More information:
I've just checked and i have the same code as you and it works perferctly. The only difference is how i fill my List for the params :
I use a : ArrayList<BasicNameValuePair> params
and fill it this way :
params.add(new BasicNameValuePair("apikey", apikey);
I do not use any JSONObject to send params to the webservices.
Are you obliged to use the JSONObject ?