A String literal is a Java language concept. This is a String literal:

"a String literal"

A String object is an individual instance of the java.lang.String class.

String s1 = "abcde";
String s2 = new String("abcde");
String s3 = "abcde";

All are valid, but have a slight difference. s1 will refer to an interned String object. This means, that the character sequence "abcde" will be stored at a central place, and whenever the same literal "abcde" is used again, the JVM will not create a new String object but use the reference of the cached String.

s2 is guranteed to be a new String object, so in this case we have:

s1 == s2 // is false
s1 == s3 // is true
s1.equals(s2) // is true

To my surprise, clearing temp files located in the %TEMP% directory resolved the issue for me.

Note: This path is generally at C:\Users\(yourusername)\AppData\Local\Temp

As @Warren-P included, you can navigate to the temp folder by putting in %temp% in Start Menu, or launch "File Explorer" and enter %temp% in the address bar.

Try this Generic Class For Xml Serialization & Deserialization.

public class SerializeConfig<T> where T : class
{
    public static void Serialize(string path, T type)
    {
        var serializer = new XmlSerializer(type.GetType());
        using (var writer = new FileStream(path, FileMode.Create))
        {
            serializer.Serialize(writer, type);
        }
    }

    public static T DeSerialize(string path)
    {
        T type;
        var serializer = new XmlSerializer(typeof(T));
        using (var reader = XmlReader.Create(path))
        {
            type = serializer.Deserialize(reader) as T;
        }
        return type;
    }
}

as @Jörg W Mittag pointed out: in jruby, fix num size is always 8 bytes long. This code snippet shows the truth:

fmax = ->{
  if RUBY_PLATFORM == 'java'
    2**63 - 1
  else
    2**(0.size * 8 - 2) - 1
  end
}.call

p fmax.class     # Fixnum

fmax = fmax + 1  

p fmax.class     #Bignum

The Facebook API watches for the FB._apiKey so you can watch for this before calling your own application of the API with something like:

window.fbAsyncInit = function() {
  FB.init({
    //...your init object
  });
  function myUseOfFB(){
    //...your FB API calls
  };
  function FBreadyState(){
    if(FB._apiKey) return myUseOfFB();
    setTimeout(FBreadyState, 100); // adjust time as-desired
  };
  FBreadyState();
}; 

Not sure this makes a difference but in my case--because I wanted to be sure the UI was ready--I've wrapped the initialization with jQuery's document ready (last bit above):

  $(document).ready(FBreadyState);

Note too that I'm NOT using async = true to load Facebook's all.js, which in my case seems to be helping with signing into the UI and driving features more reliably.

You can print some text by using SELECT command like that:

SELECT 'some text'

Result:

+-----------+
| some text |
+-----------+
| some text |
+-----------+
1 row in set (0.02 sec)

Wikipedia has the answer, along with a number of other sources.

A segfault basically means you did something bad with pointers. This is probably a segfault:

char *c = NULL;
...
*c; // dereferencing a NULL pointer

Or this:

char *c = "Hello";
...
c[10] = 'z'; // out of bounds, or in this case, writing into read-only memory

Or maybe this:

char *c = new char[10];
...
delete [] c;
...
c[2] = 'z'; // accessing freed memory

Same basic principle in each case - you're doing something with memory that isn't yours.

I want to make the very important note that the LINUX method using sendfile() has a major problem in that it can not copy files more than 2GB in size! I had implemented it following this question and was hitting problems because I was using it to copy HDF5 files that were many GB in size.

http://man7.org/linux/man-pages/man2/sendfile.2.html

sendfile() will transfer at most 0x7ffff000 (2,147,479,552) bytes, returning the number of bytes actually transferred. (This is true on both 32-bit and 64-bit systems.)

I know the question is about GCC, but for people looking for how to do this in other and/or multiple compilers…

TL;DR

You might want to take a look at Hedley, which is a public-domain single C/C++ header I wrote which does a lot of this stuff for you. I'll put a quick section about how to use Hedley for all this at the end of this post.

Disabling the warning

#pragma warning (disable: …) has equivalents in most compilers:

• MSVC: #pragma warning(disable:4996)
• GCC: #pragma GCC diagnostic ignored "-W…" where the ellipsis is the name of the warning; e.g., #pragma GCC diagnostic ignored "-Wdeprecated-declarations.
• clang: #pragma clang diagnostic ignored "-W…". The syntax is basically the same as GCC's, and many of the warning names are the same (though many aren't).
• Intel C Compiler: Use the MSVC syntax, but keep in mind that warning numbers are totally different. Example: #pragma warning(disable:1478 1786).
• PGI/NVidia: There is a diag_suppress pragma: #pragma diag_suppress 1215,1444. Note that all warning numbers increased by one in 20.7 (the first NV HPC release).
• TI: There is a diag_suppress pragma with the same syntax (but different warning numbers!) as PGI: pragma diag_suppress 1291,1718
• Oracle Developer Studio (suncc): there is an error_messages pragma. Annoyingly, the warnings are different for the C and C++ compilers. Both of these disable basically the same warnings:
  • C: #pragma error_messages(off,E_DEPRECATED_ATT,E_DEPRECATED_ATT_MESS)
  • C++: #pragma error_messages(off,symdeprecated,symdeprecated2)
• IAR: also uses diag_suppress like PGI and TI, but the syntax is different. Some of the warning numbers are the same, but I others have diverged: #pragma diag_suppress=Pe1444,Pe1215
• Pelles C: similar to MSVC, though again the numbers are different #pragma warn(disable:2241)

For most compilers it is often a good idea to check the compiler version before trying to disable it, otherwise you'll just end up triggering another warning. For example, GCC 7 added support for the -Wimplicit-fallthrough warning, so if you care about GCC before 7 you should do something like

#if defined(__GNUC__) && (__GNUC__ >= 7)
#  pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
#endif

For clang and compilers based on clang such as newer versions of XL C/C++ and armclang, you can check to see if the compiler knows about a particular warning using the __has_warning() macro.

#if __has_warning("-Wimplicit-fallthrough")
#  pragma clang diagnostic ignored "-Wimplicit-fallthrough"
#endif

Of course you also have to check to see if the __has_warning() macro exists:

#if defined(__has_warning)
#  if __has_warning("-Wimplicit-fallthrough")
#    pragma clang diagnostic ignored "-Wimplicit-fallthrough"
#  endif
#endif

You may be tempted to do something like

#if !defined(__has_warning)
#  define __has_warning(warning)
#endif

So you can use __has_warning a bit more easily. Clang even suggests something similar for the __has_builtin() macro in their manual. Do not do this. Other code may check for __has_warning and fall back on checking compiler versions if it doesn't exist, and if you define __has_warning you'll break their code. The right way to do this is to create a macro in your namespace. For example:

#if defined(__has_warning)
#  define MY_HAS_WARNING(warning) __has_warning(warning)
#else
#  define MY_HAS_WARNING(warning) (0)
#endif

Then you can do stuff like

#if MY_HAS_WARNING(warning)
#  pragma clang diagnostic ignored "-Wimplicit-fallthrough"
#elif defined(__GNUC__) && (__GNUC__ >= 7)
#  pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
#endif

Pushing and popping

Many compilers also support a way to push and pop warnings onto a stack. For example, this will disable a warning on GCC for one line of code, then return it to its previous state:

#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wdeprecated"
call_deprecated_function();
#pragma GCC diagnostic pop

Of course there isn't a lot of agreement across compilers about the syntax:

• GCC 4.6+: #pragma GCC diagnostic push / #pragma GCC diagnostic pop
• clang: #pragma clang diagnostic push / #pragma diagnostic pop
• Intel 13+ (and probably earlier): #pragma warning(push) / #pragma warning(pop)
• MSVC 15+ (VS 9.0 / 2008): #pragma warning(push) / #pragma warning(pop)
• ARM 5.6+: #pragma push / #pragma pop
• TI 8.1+: #pragma diag_push / #pragma diag_pop
• Pelles C 2.90+ (and probably earlier): #pragma warning(push) / #pragma warning(pop)

If memory serves, for some very old versions of GCC (like 3.x, IIRC) the push/pop pragmas had to be outside of the function.

Hiding the gory details

For most compilers it's possible to hide the logic behind macros using _Pragma, which was introduced in C99. Even in non-C99 mode, most compilers support _Pragma; the big exception is MSVC, which has its own __pragma keyword with a different syntax. The standard _Pragma takes a string, Microsoft's version doesn't:

#if defined(_MSC_VER)
#  define PRAGMA_FOO __pragma(foo)
#else
#  define PRAGMA_FOO _Pragma("foo")
#endif
PRAGMA_FOO

Is roughly equivalent, once preprocessed, to

#pragma foo

This lets us create macros so we can write code like

MY_DIAGNOSTIC_PUSH
MY_DIAGNOSTIC_DISABLE_DEPRECATED
call_deprecated_function();
MY_DIAGNOSTIC_POP

And hide away all the ugly version checks in the macro definitions.

The easy way: Hedley

Now that you understand the mechanics of how to do stuff like this portably while keeping your code clean, you understand what one of my projects, Hedley does. Instead of digging through tons of documentation and/or installing as many versions of as many compilers as you can to test with, you can just include Hedley (it is a single public domain C/C++ header) and be done with it. For example:

#include "hedley.h"

HEDLEY_DIAGNOSTIC_PUSH
HEDLEY_DIAGNOSTIC_DISABLE_DEPRECATED
call_deprecated();
HEDLEY_DIAGNOSTIC_POP

Will disable the warning about calling a deprecated function on GCC, clang, ICC, PGI, MSVC, TI, IAR, ODS, Pelles, and possibly others (I probably won't bother updating this answer as I update Hedley). And, on compilers which aren't known to work, the macros will be preprocessed away to nothing, so your code will continue to work with any compiler. Of course HEDLEY_DIAGNOSTIC_DISABLE_DEPRECATED isn't the only warning Hedley knows about, nor is disabling warnings all Hedley can do, but hopefully you get the idea.

" would work in this particular case, as suggested before me, because of the HTML context.

However, if you want your JavaScript code to be independently escaped for any context, you could opt for the native JavaScript encoding:
' becomes \x27
" becomes \x22

So your onclick would become:
DoEdit('Preliminary Assessment \x22Mini\x22');

This would work for example also when passing a JavaScript string as a parameter to another JavaScript method (alert() is an easy test method for this).

I am referring you to the duplicate Stack Overflow question, How do I escape a string inside JavaScript code inside an onClick handler?.

Add this line to ProGuard-rules.pro file:

-keepparameternames

That helped me while obfuscating library. I was getting zip exception when I add library as dependency.

Use the new clipboard API, via navigator.clipboard. It can be used like this:

navigator.clipboard.readText()
  .then(text => {
    console.log('Pasted content: ', text);
  })
  .catch(err => {
    console.error('Failed to read clipboard contents: ', err);
  });

Or with async syntax:

const text = await navigator.clipboard.readText();

Keep in mind that this will prompt the user with a permission request dialog box, so no funny business possible.

The above code will not work if called from the console. It only works when you run the code in an active tab. To run the code from your console you can set a timeout and click in the website window quickly:

setTimeout(async () => {
  const text = await navigator.clipboard.readText();
  console.log(text);
}, 2000);

Read more on the API and usage in the Google developer docs.

Spec

Use a white space to match all descendants of an element:

div.dropdown * {
    color: red;
}

x y matches every element y that is inside x, however deeply nested it may be - children, grandchildren and so on.

The asterisk * matches any element.

Official Specification: CSS 2.1: Chapter 5.5: Descendant Selectors

A Serial field was added to the Build class in API level 9 (Android 2.3 - Gingerbread). Documentation says it represents the hardware serial number. Thus it should be unique, if it exists on the device.

I don't know whether it is actually supported (=not null) by all devices with API level >= 9 though.

I've read a few answers and agree its not best practice, but the easiest way to order your tests - and the way that JUnit runs tests by default is by alphabetic name ascending.

So just name your tests in the alphabetic order that you want. Also note the test name must begin with the word test. Just watch out for numbers

test12 will run before test2

so:

testA_MyFirstTest testC_ThirdTest testB_ATestThatRunsSecond

let dateVar = moment('any date value');
let newDateVar = dateVar.utc().format();

nice and clean!!!!

For a generic DAO this worked:

    public void Delete(T entity)
    {
        db.Entry(entity).State = EntityState.Deleted;
        db.SaveChanges();
    }

you can do that

var list = new List<string>();
list.Clear();

Stephen Toub wrote a great article on implementing global keyboard hooks in C#:

using System;
using System.Diagnostics;
using System.Windows.Forms;
using System.Runtime.InteropServices;

class InterceptKeys
{
    private const int WH_KEYBOARD_LL = 13;
    private const int WM_KEYDOWN = 0x0100;
    private static LowLevelKeyboardProc _proc = HookCallback;
    private static IntPtr _hookID = IntPtr.Zero;

    public static void Main()
    {
        _hookID = SetHook(_proc);
        Application.Run();
        UnhookWindowsHookEx(_hookID);
    }

    private static IntPtr SetHook(LowLevelKeyboardProc proc)
    {
        using (Process curProcess = Process.GetCurrentProcess())
        using (ProcessModule curModule = curProcess.MainModule)
        {
            return SetWindowsHookEx(WH_KEYBOARD_LL, proc,
                GetModuleHandle(curModule.ModuleName), 0);
        }
    }

    private delegate IntPtr LowLevelKeyboardProc(
        int nCode, IntPtr wParam, IntPtr lParam);

    private static IntPtr HookCallback(
        int nCode, IntPtr wParam, IntPtr lParam)
    {
        if (nCode >= 0 && wParam == (IntPtr)WM_KEYDOWN)
        {
            int vkCode = Marshal.ReadInt32(lParam);
            Console.WriteLine((Keys)vkCode);
        }
        return CallNextHookEx(_hookID, nCode, wParam, lParam);
    }

    [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true)]
    private static extern IntPtr SetWindowsHookEx(int idHook,
        LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId);

    [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true)]
    [return: MarshalAs(UnmanagedType.Bool)]
    private static extern bool UnhookWindowsHookEx(IntPtr hhk);

    [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true)]
    private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode,
        IntPtr wParam, IntPtr lParam);

    [DllImport("kernel32.dll", CharSet = CharSet.Auto, SetLastError = true)]
    private static extern IntPtr GetModuleHandle(string lpModuleName);
}

you can add the 1px border to just the sides and bottom of each row. the first value is the top border, the second is the right border, the third is the bottom border, and the fourth is the left border.

div.row {
  border: 0px 1px 1px 1px solid;
}

Add onclick="" to anything you wish iOS to recognise as an element with a hover.

<div onclick="">Click Me!</div>

If you want the table to still be 100% then set one of the columns to have a width:100%; That will extend that column to fill the extra space and allow the other columns to keep their auto width :)

Um... Why all the complications and tricks?

Rather then using DROP USER... You can simply delete the user from the mysql.user table (which doesn't throw an error if the user does not exist), and then flush privileges to apply the change.

DELETE FROM mysql.user WHERE User = 'SomeUser' AND Host = 'localhost';
FLUSH PRIVILEGES;

-- UPDATE --

I was wrong. It's not safe to delete the user like that. You do need to use DROP USER. Since it is possible to have mysql options set to not create users automatically via grants (an option I use), I still wouldn't recommend that trick. Here's a snipet from a stored procedure that works for me:

DECLARE userCount INT DEFAULT 0;
SELECT COUNT(*) INTO userCount FROM mysql.user WHERE User = userName AND Host='localhost';
IF userCount > 0 THEN
    SET @S=CONCAT("DROP USER ", userName, "@localhost" );
    PREPARE stmt FROM @S;
    EXECUTE stmt;
    SELECT CONCAT("DROPPED PRE-EXISTING USER: ", userName, "@localhost" ) as info;
END IF;
FLUSH PRIVILEGES;

first, create a class to hold your parameters:

public class PkRk {
    public int pk { get; set; }
    public int rk { get; set; }
}

then, use the Html.Action passing the parameters:

Html.Action("PkRkAction", new { pkrk = new PkRk { pk=400, rk=500} })

and use in Controller:

public ActionResult PkRkAction(PkRk pkrk) {
    return PartialView(pkrk);
}

You could try the FLOOR function like this:

SELECT FLOOR(columnName), moreColumns, etc 
FROM myTable 
WHERE ... 

You could also try the FORMAT function, provided you know the decimal places can be omitted:

SELECT FORMAT(columnName,0), moreColumns, etc 
FROM myTable 
WHERE ... 

You could combine the two functions

SELECT FORMAT(FLOOR(columnName),0), moreColumns, etc 
FROM myTable 
WHERE ... 

I think you should be able to follow the method used in this post. It looks really ugly, but I would think you could do it twice and get the result you want.

I wonder if this is actually a case where you'd be better off using DataContext.ExecuteCommand(...) instead of converting to linq.

Hopefully this is self explanatory enough. Use the comments in the code to help understand what is happening. Pass a single cell to this function. The value of that cell will be the base file name. If the cell contains "AwesomeData" then we will try and create a file in the current users desktop called AwesomeData.pdf. If that already exists then try AwesomeData2.pdf and so on. In your code you could just replace the lines filename = Application..... with filename = GetFileName(Range("A1"))

Function GetFileName(rngNamedCell As Range) As String
    Dim strSaveDirectory As String: strSaveDirectory = ""
    Dim strFileName As String: strFileName = ""
    Dim strTestPath As String: strTestPath = ""
    Dim strFileBaseName As String: strFileBaseName = ""
    Dim strFilePath As String: strFilePath = ""
    Dim intFileCounterIndex As Integer: intFileCounterIndex = 1

    ' Get the users desktop directory.
    strSaveDirectory = Environ("USERPROFILE") & "\Desktop\"
    Debug.Print "Saving to: " & strSaveDirectory

    ' Base file name
    strFileBaseName = Trim(rngNamedCell.Value)
    Debug.Print "File Name will contain: " & strFileBaseName

    ' Loop until we find a free file number
    Do
        If intFileCounterIndex > 1 Then
            ' Build test path base on current counter exists.
            strTestPath = strSaveDirectory & strFileBaseName & Trim(Str(intFileCounterIndex)) & ".pdf"
        Else
            ' Build test path base just on base name to see if it exists.
            strTestPath = strSaveDirectory & strFileBaseName & ".pdf"
        End If

        If (Dir(strTestPath) = "") Then
            ' This file path does not currently exist. Use that.
            strFileName = strTestPath
        Else
            ' Increase the counter as we have not found a free file yet.
            intFileCounterIndex = intFileCounterIndex + 1
        End If

    Loop Until strFileName <> ""

    ' Found useable filename
    Debug.Print "Free file name: " & strFileName
    GetFileName = strFileName

End Function

The debug lines will help you figure out what is happening if you need to step through the code. Remove them as you see fit. I went a little crazy with the variables but it was to make this as clear as possible.

In Action

My cell O1 contained the string "FileName" without the quotes. Used this sub to call my function and it saved a file.

Sub Testing()
    Dim filename As String: filename = GetFileName(Range("o1"))

    ActiveWorkbook.Worksheets("Sheet1").Range("A1:N24").ExportAsFixedFormat Type:=xlTypePDF, _
                                              filename:=filename, _
                                              Quality:=xlQualityStandard, _
                                              IncludeDocProperties:=True, _
                                              IgnorePrintAreas:=False, _
                                              OpenAfterPublish:=False
End Sub

Where is your code located in reference to everything else? Perhaps you need to make a module if you have not already and move your existing code into there.

first call the intent

Intent intenta = new Intent(Intent.ACTION_OPEN_DOCUMENT_TREE);
startActivityForResult(intenta, 42);

then call the result

@Override
protected void onActivityResult(int requestCode, int resultCode, Intent data) {
    super.onActivityResult(requestCode, resultCode, data);
    switch (requestCode) {
        case 42:
            if (resultCode == Activity.RESULT_OK) {
                Uri sdCardUri = data.getData();
                DocumentFile pickedDir = DocumentFile.fromTreeUri(this, sdCardUri);
                for (DocumentFile file : pickedDir.listFiles()) {
                    String pp = file.getName();
                    if(pp.equals("VLC.apk"))
                        file.delete();
                    String ppdf="";
                }
                File pathFile = new File(String.valueOf(sdCardUri));
                pathFile.delete();
            }
            break;
    }
}

The child views in your list row should be considered selected whenever the parent row is selected, so you should be able to just set a normal state drawable/color-list on the views you want to change, no messy Java code necessary. See this SO post.

Specifically, you'd set the textColor of your textViews to an XML resource like this one:

<?xml version="1.0" encoding="utf-8"?>
<selector xmlns:android="http://schemas.android.com/apk/res/android">
    <item android:state_focused="true" android:drawable="@color/black" /> <!-- focused -->
    <item android:state_focused="true" android:state_pressed="true" android:drawable="@color/black" /> <!-- focused and pressed-->
    <item android:state_pressed="true" android:drawable="@color/green" /> <!-- pressed -->
    <item android:drawable="@color/black" /> <!-- default -->
</selector> 

Another clear solution, you can use constants to keep convention and add multiple [Authorize] attributes. Check this out:

public static class RolesConvention
{
    public const string Administrator = "Administrator";
    public const string Guest = "Guest";
}

Then in the controller:

[Authorize(Roles = RolesConvention.Administrator )]
[Authorize(Roles = RolesConvention.Guest)]
[Produces("application/json")]
[Route("api/[controller]")]
public class MyController : Controller

I know this is old but my order is as follows:

in order of public, protected, private, internal, abstract

• Constants
• Static Variables
• Fields
• Events
• Constructor(s)
• Methods
• Properties
• Delegates

I also like to write out properties like this (instead of the shorthand approach)

// Some where in the fields section
private int someVariable;

// I also refrain from
// declaring variables outside of the constructor

// and some where in the properties section I do
public int SomeVariable
{
    get { return someVariable; }
    set { someVariable = value; }
}

JWTs can be either signed, encrypted or both. If a token is signed, but not encrypted, everyone can read its contents, but when you don't know the private key, you can't change it. Otherwise, the receiver will notice that the signature won't match anymore.

Answer to your comment: I'm not sure if I understand your comment the right way. Just to be sure: do you know and understand digital signatures? I'll just briefly explain one variant (HMAC, which is symmetrical, but there are many others).

Let's assume Alice wants to send a JWT to Bob. They both know some shared secret. Mallory doesn't know that secret, but wants to interfere and change the JWT. To prevent that, Alice calculates Hash(payload + secret) and appends this as signature.

When receiving the message, Bob can also calculate Hash(payload + secret) to check whether the signature matches. If however, Mallory changes something in the content, she isn't able to calculate the matching signature (which would be Hash(newContent + secret)). She doesn't know the secret and has no way of finding it out. This means if she changes something, the signature won't match anymore, and Bob will simply not accept the JWT anymore.

Let's suppose, I send another person the message {"id":1} and sign it with Hash(content + secret). (+ is just concatenation here). I use the SHA256 Hash function, and the signature I get is: 330e7b0775561c6e95797d4dd306a150046e239986f0a1373230fda0235bda8c. Now it's your turn: play the role of Mallory and try to sign the message {"id":2}. You can't because you don't know which secret I used. If I suppose that the recipient knows the secret, he CAN calculate the signature of any message and check if it's correct.

Something like this should do the trick.

function Timer(fn, countdown) {
    var ident, complete = false;

    function _time_diff(date1, date2) {
        return date2 ? date2 - date1 : new Date().getTime() - date1;
    }

    function cancel() {
        clearTimeout(ident);
    }

    function pause() {
        clearTimeout(ident);
        total_time_run = _time_diff(start_time);
        complete = total_time_run >= countdown;
    }

    function resume() {
        ident = complete ? -1 : setTimeout(fn, countdown - total_time_run);
    }

    var start_time = new Date().getTime();
    ident = setTimeout(fn, countdown);

    return { cancel: cancel, pause: pause, resume: resume };
}

Let's use

mysqli_connect

instead of

mysql_connect

because mysql_connect isn't supported in PHP 7.

Make sure you have the prerequisite, a JVM (http://wiki.eclipse.org/Eclipse/Installation#Install_a_JVM) installed.

This will be a JRE and JDK package.

There are a number of sources which includes: http://www.oracle.com/technetwork/java/javase/downloads/index.html.

I don't know about CLI, I had tried, but I couldn't. I deleted using IDE Idea history.

If You use an Intellij Idea, just open History changes.

Tap by main folder of the project -> right click -> local history -> show history.

Then from top to bottom revert changes.

It should help! Good luck!=)

For me the better solution was the following. Since the initiative of closing the connection was done by the server, the setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) had no effect and the TIME_WAIT was avoiding a new connection on the same port with error:

[Errno 10048]: Address already in use. Only one usage of each socket address (protocol/IP address/port) is normally permitted 

I finally used the solution to let the OS choose the port itself, then another port is used if the precedent is still in TIME_WAIT.

I replaced:

self._socket.bind((guest, port))

with:

self._socket.bind((guest, 0))

As it was indicated in the python socket documentation of a tcp address:

If supplied, source_address must be a 2-tuple (host, port) for the socket to bind to as its source address before connecting. If host or port are ‘’ or 0 respectively the OS default behavior will be used.

I work on normalize.css.

The main differences are:

1. Normalize.css preserves useful defaults rather than "unstyling" everything. For example, elements like sup or sub "just work" after including normalize.css (and are actually made more robust) whereas they are visually indistinguishable from normal text after including reset.css. So, normalize.css does not impose a visual starting point (homogeny) upon you. This may not be to everyone's taste. The best thing to do is experiment with both and see which gels with your preferences.

2. Normalize.css corrects some common bugs that are out of scope for reset.css. It has a wider scope than reset.css, and also provides bug fixes for common problems like: display settings for HTML5 elements, the lack of font inheritance by form elements, correcting font-size rendering for pre, SVG overflow in IE9, and the button styling bug in iOS.

3. Normalize.css doesn't clutter your dev tools. A common irritation when using reset.css is the large inheritance chain that is displayed in browser CSS debugging tools. This is not such an issue with normalize.css because of the targeted stylings.

4. Normalize.css is more modular. The project is broken down into relatively independent sections, making it easy for you to potentially remove sections (like the form normalizations) if you know they will never be needed by your website.

5. Normalize.css has better documentation. The normalize.css code is documented inline as well as more comprehensively in the GitHub Wiki. This means you can find out what each line of code is doing, why it was included, what the differences are between browsers, and more easily run your own tests. The project aims to help educate people on how browsers render elements by default, and make it easier for them to be involved in submitting improvements.

I've written in greater detail about this in an article about normalize.css

You can use the easier function preg_match instead, It's better and faster than all of the other ones.

$var = "<tag>Get this var</tag>";
preg_match("/<tag>(.*)<\/tag>/", $var , $new_var);
echo $new_var['1']; 

Output: Get this var

Simple casting?

double d = (double)15552451L;

Use the function Contains from the strings package.

import (
    "strings"
)
strings.Contains("something", "some") // true

It seems that the original test case is wrong.

I can confirm that the selector #my_parent_element * works with unbind().

Let's take the following html as an example:

<div id="#my_parent_element">
  <div class="div1">
    <div class="div2">hello</div>
    <div class="div3">my</div>
  </div>
  <div class="div4">name</div>
  <div class="div5">
    <div class="div6">is</div>
    <div class="div7">
      <div class="div8">marco</div>
      <div class="div9">(try and click on any word)!</div>
    </div>
  </div>
</div>
<button class="unbind">Now, click me and try again</button>

And the jquery bit:

$('.div1,.div2,.div3,.div4,.div5,.div6,.div7,.div8,.div9').click(function() {
  alert('hi!');
})
$('button.unbind').click(function() {
  $('#my_parent_element *').unbind('click');
})

You can try it here: http://jsfiddle.net/fLvwbazk/7/

maybe you have code like this before the jquery:

var $jq=jQuery.noConflict();
$jq('ul.menu').lavaLamp({
    fx: "backout", 
    speed: 700
});

and them was Conflict

you can change $ to (jQuery)

Use string concatenation:

href={'/posts/' + post.id}

The JSX syntax allows either to use strings or expressions ({...}) as values. You cannot mix both. Inside an expression you can, as the name suggests, use any JavaScript expression to compute the value.

Per the Android docs SystemClock.elapsedRealtime() is the recommend basis for general purpose interval timing. This is because, per the documentation, elapsedRealtime() is guaranteed to be monotonic, [...], so is the recommend basis for general purpose interval timing.

The SystemClock documentation has a nice overview of the various time methods and the applicable use cases for them.

• SystemClock.elapsedRealtime() and SystemClock.elapsedRealtimeNanos() are the best bet for calculating general purpose elapsed time.
• SystemClock.uptimeMillis() and System.nanoTime() are another possibility, but unlike the recommended methods, they don't include time in deep sleep. If this is your desired behavior then they are fine to use. Otherwise stick with elapsedRealtime().
• Stay away from System.currentTimeMillis() as this will return "wall" clock time. Which is unsuitable for calculating elapsed time as the wall clock time may jump forward or backwards. Many things like NTP clients can cause wall clock time to jump and skew. This will cause elapsed time calculations based on currentTimeMillis() to not always be accurate.

When the game starts:

long startTime = SystemClock.elapsedRealtime();

When the game ends:

long endTime = SystemClock.elapsedRealtime();
long elapsedMilliSeconds = endTime - startTime;
double elapsedSeconds = elapsedMilliSeconds / 1000.0;

Also, Timer() is a best effort timer and will not always be accurate. So there will be an accumulation of timing errors over the duration of the game. To more accurately display interim time, use periodic checks to System.currentTimeMillis() as the basis of the time sent to setText(...).

Also, instead of using Timer, you might want to look into using TimerTask, this class is designed for what you want to do. The only problem is that it counts down instead of up, but that can be solved with simple subtraction.

I had similar issues and below is how i fixed it:

• Restart your PC, when booting up press f10 key to select or open BIOS Settings.
• Locate and check / enable Virtual Technology-x option under Device Configuration Settings
• Save changes, system restart.
• All should be working fine now

try it:

EXEC [ServerName].[DatabaseName].dbo.sp_columns 'TableName'

and you can get some table structure information, such as:

TABLE_QUALIFIER, TABLE_OWNER, TABLE_NAME, COLUMN_NAME, DATA_TYPE, TYPE_NAME...

The answer to this depends very much on how your specific Java compiler optimizes the bytecode it generates. Strings are immutable and, theoretically, each "+" operation can create a new one. But, your compiler almost certainly optimizes away interim steps in building long strings. It's entirely possible that both lines of code above generate the exact same bytecode.

The only real way to know is to test the code iteratively in your current environment. Write a QD app that concatenates strings both ways iteratively and see how they time out against each other.

HTML Markup

<select id="select">
  <option value="1" data-foo="dogs">this</option>
  <option value="2" data-foo="cats">that</option>
  <option value="3" data-foo="gerbils">other</option>
</select>

Code

// JavaScript using jQuery
$(function(){
    $('select').change(function(){
       var selected = $(this).find('option:selected');
       var extra = selected.data('foo'); 
       ...
    });
});

// Plain old JavaScript
var sel = document.getElementById('select');
var selected = sel.options[sel.selectedIndex];
var extra = selected.getAttribute('data-foo');

See this as a working sample using jQuery here: http://jsfiddle.net/GsdCj/1/
See this as a working sample using plain JavaScript here: http://jsfiddle.net/GsdCj/2/

By using data attributes from HTML5 you can add extra data to elements in a syntactically-valid manner that is also easily accessible from jQuery.

It doesn't matter is your app Boot or just raw Spring. There is just enough to inject org.springframework.core.env.Environment to your bean.

@Autowired
private Environment environment;
....

this.environment.getActiveProfiles();

There are a few. I was looking into MBTrading for a friend. I didn't get too far, as my friend lost interest. Seemed relatively straigt forward with a C# and VB.Net SDK. They had some docs and everything. This was ~6 months ago, so it may be better (or worse) by now.

IIRC, you can create a demo account for free. I don't remember all the details, but it let you connect to their test server and pull quotes and make fake trades and such to get your software fine tuned.

Don't know much about cost for an actual account or anything.

As ibram stated, add the manifest thru solution explorer:

This creates a default manifest. Now, edit the manifest.

• Update the assemblyIdentity name as your application.
• Ask users to trust your application

• Add supported OS

Transmission Delay : Amount of time required to pump all bits/packets into the electric wire/optic fibre.

Propagation delay : It's the amount of time needed for a packet to reach the destination.

If propagation delay is very high than transmission delay the chance of losing the packet is high.

Also google's comparison (though it's a bit old, done in 2008)

http://code.google.com/p/support/wiki/DVCSAnalysis

I was getting exception

java.util.zip.ZipException: invalid entry CRC (expected 0x0 but got 0xdeadface)
    at java.util.zip.ZipInputStream.read(ZipInputStream.java:221)
    at java.util.zip.ZipInputStream.closeEntry(ZipInputStream.java:140)
    at java.util.zip.ZipInputStream.getNextEntry(ZipInputStream.java:118)
...

when unzipping an archive in Java. The archive itself didn't seem corrupted as 7zip (and others) opened it without any problems or complaints about invalid CRC.

I switched to Apache Commons Compress for reading the zip-entries and that resolved the problem.

The cache is C:\Users\userName\AppData\Local\NetBeans\Cache\, and then the version name of the folder will specify the correct cache.

You can also do this: Close the IDE. Instead, of deleting files and risking everything, rename this cache folder. Now start the IDE. Once it starts, a new cache folder will be created since the folder is not found. Now you can delete the renamed folder safely.

Classically, ~/.profile is used by Bourne Shell, and is probably supported by Bash as a legacy measure. Again, ~/.login and ~/.cshrc were used by C Shell - I'm not sure that Bash uses them at all.

The ~/.bash_profile would be used once, at login. The ~/.bashrc script is read every time a shell is started. This is analogous to /.cshrc for C Shell.

One consequence is that stuff in ~/.bashrc should be as lightweight (minimal) as possible to reduce the overhead when starting a non-login shell.

I believe the ~/.environment file is a compatibility file for Korn Shell.

There is a project setting if you hunt down:

{project}/node_modules/react-native/local-cli/runIOS/runIOS.js

Within there are some options under module.exports including:

options: [{ command: '--simulator [string]', description: 'Explicitly set simulator to use', default: 'iPhone 7', }

Mine was line 231, simply set that to a valid installed simulator and run react-native run-ios it will run to that simulator by default.

I assume you are using Series.plot() to plot your data. If you look at the docs for Series.plot() here:

http://pandas.pydata.org/pandas-docs/dev/generated/pandas.Series.plot.html

there is no color parameter listed where you might be able to set the colors for your bar graph.

However, the Series.plot() docs state the following at the end of the parameter list:

kwds : keywords
Options to pass to matplotlib plotting method

What that means is that when you specify the kind argument for Series.plot() as bar, Series.plot() will actually call matplotlib.pyplot.bar(), and matplotlib.pyplot.bar() will be sent all the extra keyword arguments that you specify at the end of the argument list for Series.plot().

If you examine the docs for the matplotlib.pyplot.bar() method here:

http://matplotlib.org/api/pyplot_api.html#matplotlib.pyplot.bar

..it also accepts keyword arguments at the end of it's parameter list, and if you peruse the list of recognized parameter names, one of them is color, which can be a sequence specifying the different colors for your bar graph.

Putting it all together, if you specify the color keyword argument at the end of your Series.plot() argument list, the keyword argument will be relayed to the matplotlib.pyplot.bar() method. Here is the proof:

import pandas as pd
import matplotlib.pyplot as plt

s = pd.Series(
    [5, 4, 4, 1, 12],
    index = ["AK", "AX", "GA", "SQ", "WN"]
)

#Set descriptions:
plt.title("Total Delay Incident Caused by Carrier")
plt.ylabel('Delay Incident')
plt.xlabel('Carrier')

#Set tick colors:
ax = plt.gca()
ax.tick_params(axis='x', colors='blue')
ax.tick_params(axis='y', colors='red')

#Plot the data:
my_colors = 'rgbkymc'  #red, green, blue, black, etc.

pd.Series.plot(
    s, 
    kind='bar', 
    color=my_colors,
)

plt.show()

Note that if there are more bars than colors in your sequence, the colors will repeat.

If you need to delete based on a list, you can use IN:

DELETE FROM your_table
WHERE id IN (value1, value2, ...);

If you need to delete based on the result of a query, you can also use IN:

DELETE FROM your_table
WHERE id IN (select aColumn from ...);

(Notice that the subquery must return only one column)

If you need to delete based on a range of values, either you use BETWEEN or you use inequalities:

DELETE FROM your_table
WHERE id BETWEEN bottom_value AND top_value;

or

DELETE FROM your_table
WHERE id >= a_value AND id <= another_value;

When using InfoPlist.strings file (in XCode it should be placed next to Info.plist file - real file location can be anywhere within the project probably

) be careful to use the key's short name for the translation.

I was trying to use Privacy - Camera Usage Description, but the working key is NSCameraUsageDescription

Seems to work fine.

If you have an empty BEGIN ... END block you might see

Msg 102, Level 15, State 1, Line 10 Incorrect syntax near 'END'.

A little bit of validation with:

/<(?=.*? .*?\/ ?>|br|hr|input|!--|wbr)[a-z]+.*?>|<([a-z]+).*?<\/\1>/i.test(htmlStringHere) 

This searches for empty tags (some predefined) and / terminated XHTML empty tags and validates as HTML because of the empty tag OR will capture the tag name and attempt to find it's closing tag somewhere in the string to validate as HTML.

Explained demo: http://regex101.com/r/cX0eP2

Update:

Complete validation with:

/<(br|basefont|hr|input|source|frame|param|area|meta|!--|col|link|option|base|img|wbr|!DOCTYPE).*?>|<(a|abbr|acronym|address|applet|article|aside|audio|b|bdi|bdo|big|blockquote|body|button|canvas|caption|center|cite|code|colgroup|command|datalist|dd|del|details|dfn|dialog|dir|div|dl|dt|em|embed|fieldset|figcaption|figure|font|footer|form|frameset|head|header|hgroup|h1|h2|h3|h4|h5|h6|html|i|iframe|ins|kbd|keygen|label|legend|li|map|mark|menu|meter|nav|noframes|noscript|object|ol|optgroup|output|p|pre|progress|q|rp|rt|ruby|s|samp|script|section|select|small|span|strike|strong|style|sub|summary|sup|table|tbody|td|textarea|tfoot|th|thead|time|title|tr|track|tt|u|ul|var|video).*?<\/\2>/i.test(htmlStringHere) 

This does proper validation as it contains ALL HTML tags, empty ones first followed by the rest which need a closing tag.

Explained demo here: http://regex101.com/r/pE1mT5

Use the following after the loop.

.TrimEnd(',')

or simply change to

string commaSeparatedList = input.Aggregate((a, x) => a + ", " + x)

I use the ffmpeg-python binding. You can find more information here.

import ffmpeg
(
    ffmpeg
    .input('/path/to/jpegs/*.jpg', pattern_type='glob', framerate=25)
    .output('movie.mp4')
    .run()
)

Here is just a way to simulate multi-threading in Javascript

Now I am going to create 3 threads which will calculate numbers addition, numbers can be divided with 13 and numbers can be divided with 3 till 10000000000. And these 3 functions are not able to run in same time as what Concurrency means. But I will show you a trick that will make these functions run recursively in the same time : jsFiddle

This code belongs to me.

Body Part

    <div class="div1">
    <input type="button" value="start/stop" onclick="_thread1.control ? _thread1.stop() : _thread1.start();" /><span>Counting summation of numbers till 10000000000</span> = <span id="1">0</span>
</div>
<div class="div2">
    <input type="button" value="start/stop" onclick="_thread2.control ? _thread2.stop() : _thread2.start();" /><span>Counting numbers can be divided with 13 till 10000000000</span> = <span id="2">0</span>
</div>
<div class="div3">
    <input type="button" value="start/stop" onclick="_thread3.control ? _thread3.stop() : _thread3.start();" /><span>Counting numbers can be divided with 3 till 10000000000</span> = <span id="3">0</span>
</div>

Javascript Part

var _thread1 = {//This is my thread as object
    control: false,//this is my control that will be used for start stop
    value: 0, //stores my result
    current: 0, //stores current number
    func: function () {   //this is my func that will run
        if (this.control) {      // checking for control to run
            if (this.current < 10000000000) {
                this.value += this.current;   
                document.getElementById("1").innerHTML = this.value;
                this.current++;
            }
        }
        setTimeout(function () {  // And here is the trick! setTimeout is a king that will help us simulate threading in javascript
            _thread1.func();    //You cannot use this.func() just try to call with your object name
        }, 0);
    },
    start: function () {
        this.control = true;   //start function
    },
    stop: function () {
        this.control = false;    //stop function
    },
    init: function () {
        setTimeout(function () {
            _thread1.func();    // the first call of our thread
        }, 0)
    }
};
var _thread2 = {
    control: false,
    value: 0,
    current: 0,
    func: function () {
        if (this.control) {
            if (this.current % 13 == 0) {
                this.value++;
            }
            this.current++;
            document.getElementById("2").innerHTML = this.value;
        }
        setTimeout(function () {
            _thread2.func();
        }, 0);
    },
    start: function () {
        this.control = true;
    },
    stop: function () {
        this.control = false;
    },
    init: function () {
        setTimeout(function () {
            _thread2.func();
        }, 0)
    }
};
var _thread3 = {
    control: false,
    value: 0,
    current: 0,
    func: function () {
        if (this.control) {
            if (this.current % 3 == 0) {
                this.value++;
            }
            this.current++;
            document.getElementById("3").innerHTML = this.value;
        }
        setTimeout(function () {
            _thread3.func();
        }, 0);
    },
    start: function () {
        this.control = true;
    },
    stop: function () {
        this.control = false;
    },
    init: function () {
        setTimeout(function () {
            _thread3.func();
        }, 0)
    }
};

_thread1.init();
_thread2.init();
_thread3.init();

I hope this way will be helpful.

You aren't building your formula right.

Worksheets("EmployeeCosts").Range("B" & var1a).Formula =  "=SUM(H5:H" & var1a & ")"

This does the same as the following lines do:

Dim myFormula As String
myFormula = "=SUM(H5:H"
myFormula = myFormula & var1a
myformula = myformula & ")"

which is what you are trying to do.

Also, you want to have the = at the beginning of the formala.

Bassed on this page here:

Compare two MySQL databases

I modified it so you can use ddbb in diferent hosts.

#!/bin/sh

echo "Usage: dbdiff [user1:pass1@dbname1:host] [user2:pass2@dbname2:host] [ignore_table1:ignore_table2...]"

dump () {
  up=${1%%@*}; down=${1##*@}; user=${up%%:*}; pass=${up##*:}; dbname=${down%%:*}; host=${down##*:};
  mysqldump --opt --compact --skip-extended-insert -u $user -p$pass $dbname -h $host $table > $2
}

rm -f /tmp/db.diff

# Compare
up=${1%%@*}; down=${1##*@}; user=${up%%:*}; pass=${up##*:}; dbname=${down%%:*}; host=${down##*:};
for table in `mysql -u $user -p$pass $dbname -h $host -N -e "show tables" --batch`; do
  if [ "`echo $3 | grep $table`" = "" ]; then
    echo "Comparing '$table'..."
    dump $1 /tmp/file1.sql
    dump $2 /tmp/file2.sql
    diff -up /tmp/file1.sql /tmp/file2.sql >> /tmp/db.diff
  else
    echo "Ignored '$table'..."
  fi
done
less /tmp/db.diff
rm -f /tmp/file1.sql /tmp/file2.sql

This can be done in two ways.

JLabel Horizontal Alignment

You can use the JLabel constructor:

JLabel(String text, int horizontalAlignment) 

To align to the right:

JLabel label = new JLabel("Telephone", SwingConstants.RIGHT);

JLabel also has setHorizontalAlignment:

label.setHorizontalAlignment(SwingConstants.RIGHT);

This assumes the component takes up the whole width in the container.

Using Layout

A different approach is to use the layout to actually align the component to the right, whilst ensuring they do not take the whole width. Here is an example with BoxLayout:

    Box box = Box.createVerticalBox();
    JLabel label1 = new JLabel("test1, the beginning");
    label1.setAlignmentX(Component.RIGHT_ALIGNMENT);
    box.add(label1);

    JLabel label2 = new JLabel("test2, some more");
    label2.setAlignmentX(Component.RIGHT_ALIGNMENT);
    box.add(label2);

    JLabel label3 = new JLabel("test3");
    label3.setAlignmentX(Component.RIGHT_ALIGNMENT);
    box.add(label3);


    add(box);

from command line :

mysql -uroot -proot  -e "select count(*) from 
information_schema.tables where table_schema = 'database_name';"

in above example root is username and password , hosted on localhost.

I got this after saving the JSON file using Notepad2, so I had to open it with Notepad++ and then say "Convert to UTF-8". Then it worked.

Combining Saurabh Chandra Patel's answer with Molecular Man's observation, you should have something like this:

JSON.parse('{"TeamList" : [{"teamid" : "1","teamname" : "Barcelona"}]}');

API token is the same as password from API point of view, see source code uses token in place of passwords for the API.

See related answer from @coffeebreaks in my question python-jenkins or jenkinsapi for jenkins remote access API in python

Others is described in doc to use http basic authentication model

Assuming, var friend = { firstName: 'Harry', lastName: 'Potter' };

There are two options you have:

Update the model in-memory, and save (plain javascript array.push):

person.friends.push(friend);
person.save(done);

or

PersonModel.update(
    { _id: person._id }, 
    { $push: { friends: friend } },
    done
);

I always try and go for the first option when possible, because it'll respect more of the benefits that mongoose gives you (hooks, validation, etc.).

However, if you are doing lots of concurrent writes, you will hit race conditions where you'll end up with nasty version errors to stop you from replacing the entire model each time and losing the previous friend you added. So only go to the former when it's absolutely necessary.

I did not see any mention of it in the other answers, so here are my 2 Canadian cents:

On the "using namespace" topic, a useful statement is the namespace alias, allowing you to "rename" a namespace, normally to give it a shorter name. For example, instead of:

Some::Impossibly::Annoyingly::Long:Name::For::Namespace::Finally::TheClassName foo;
Some::Impossibly::Annoyingly::Long:Name::For::Namespace::Finally::AnotherClassName bar;

you can write:

namespace Shorter = Some::Impossibly::Annoyingly::Long:Name::For::Namespace::Finally;
Shorter::TheClassName foo;
Shorter::AnotherClassName bar;

If you had a problem as me, that you have already committed some changes, but now, for any reason you want to get rid of it, the quickest way is to use git reset like this:

git reset --hard HEAD~2

I had 2 not needed commits, hence the number 2. You can change it to your own number of commits to reset.

So answering your question - if you're 5 commits ahead of remote repository HEAD, you should run this command:

git reset --hard HEAD~5

Notice that you will lose the changes you've made, so be careful!

You can use the LocalDateTime class from Java 8. For eg :

long n = 4;
LocalDateTime localDateTime = LocalDateTime.now();
System.out.println(localDateTime.plusHours(n));

The first argument is the file you wish to execute, and the second argument is an array of null-terminated strings that represent the appropriate arguments to the file as specified in the man page.

For example:

char *cmd = "ls";
char *argv[3];
argv[0] = "ls";
argv[1] = "-la";
argv[2] = NULL;

execvp(cmd, argv); //This will run "ls -la" as if it were a command

I think many people have problems with Post 'Content-type': 'application / json' The problem here is parse data Map <String, dynamic> to json:

Hope the code below can help someone

Model:

class ConversationReq {
  String name = '';
  String description = '';
  String privacy = '';
  String type = '';
  String status = '';

  String role;
  List<String> members;
  String conversationType = '';

  ConversationReq({this.type, this.name, this.status, this.description, this.privacy, this.conversationType, this.role, this.members});

  Map<String, dynamic> toJson() {

    final Map<String, dynamic> data = new Map<String, dynamic>();

    data['name'] = this.name;
    data['description'] = this.description;
    data['privacy'] = this.privacy;
    data['type'] = this.type;

    data['conversations'] = [
      {
        "members": members,
        "conversationType": conversationType,
      }
    ];

    return data;
  }
}

Request:

createNewConversation(ConversationReq param) async {
    HeaderRequestAuth headerAuth = await getAuthHeader();
    var headerRequest = headerAuth.toJson();
/*
{
            'Content-type': 'application/json',
            'x-credential-session-token': xSectionToken,
            'x-user-org-uuid': xOrg,
          }
*/

    var bodyValue = param.toJson();

    var bodydata = json.encode(bodyValue);// important
    print(bodydata);

    final response = await http.post(env.BASE_API_URL + "xxx", headers: headerRequest, body: bodydata);

    print(json.decode(response.body));
    if (response.statusCode == 200) {
      // TODO
    } else {
      // If that response was not OK, throw an error.
      throw Exception('Failed to load ConversationRepo');
    }
  }

Gathered all possible ways together!!

By using lastIndexOf() & substring() methods of Java.lang.String

// int firstIndex = str.indexOf( separator );
int lastIndexOf = str.lastIndexOf( separator );
String begningPortion = str.substring( 0, lastIndexOf );
String endPortion = str.substring( lastIndexOf + 1 );
System.out.println("First Portion : " + begningPortion );
System.out.println("Last  Portion : " + endPortion );

split()^{Java SE 1.4}. Splits the provided text into an array.

String[] split = str.split( Pattern.quote( separator ) );
String lastOne = split[split.length-1];
System.out.println("Split Array : "+ lastOne);

• How to split String before first comma?

Java 8 sequential ordered stream from an array.

String firstItem = Stream.of( split )
                         .reduce( (first,last) -> first ).get();
String lastItem = Stream.of( split )
                        .reduce( (first,last) -> last ).get();
System.out.println("First Item : "+ firstItem);
System.out.println("Last  Item : "+ lastItem);

Apache Commons Lang^jar « org.apache.commons.lang3.StringUtils

String afterLast = StringUtils.substringAfterLast(str, separator);
System.out.println("StringUtils AfterLast : "+ afterLast);

String beforeLast = StringUtils.substringBeforeLast(str, separator);
System.out.println("StringUtils BeforeLast : "+ beforeLast);

String open = "[", close = "]";
String[] groups = StringUtils.substringsBetween("Yash[777]Sam[7]", open, close);
System.out.println("String that is nested in between two Strings "+ groups[0]);

Guava: Google Core Libraries for Java. « com.google.common.base.Splitter

Splitter splitter = Splitter.on( separator ).trimResults();
Iterable<String> iterable = splitter.split( str );
String first_Iterable = Iterables.getFirst(iterable, "");
String last_Iterable = Iterables.getLast( iterable );
System.out.println(" Guava FirstElement : "+ first_Iterable);
System.out.println(" Guava LastElement  : "+ last_Iterable);

Scripting for the Java Platform « Run Javascript on the JVM with Rhino/Nashorn

• Rhino « Rhino is an open-source implementation of JavaScript written entirely in Java. It is typically embedded into Java applications to provide scripting to end users. It is embedded in J2SE 6 as the default Java scripting engine.

• Nashorn is a JavaScript engine developed in the Java programming language by Oracle. It is based on the Da Vinci Machine and has been released with Java 8.

Java Scripting Programmer's Guide

public class SplitOperations {
    public static void main(String[] args) {
        String str = "my.file.png.jpeg", separator = ".";
        javascript_Split(str, separator);
    }
    public static void javascript_Split( String str, String separator ) {
        ScriptEngineManager manager = new ScriptEngineManager();
        ScriptEngine engine = manager.getEngineByName("JavaScript");

        // Script Variables « expose java objects as variable to script.
        engine.put("strJS", str);

        // JavaScript code from file
        File file = new File("E:/StringSplit.js");
        // expose File object as variable to script
        engine.put("file", file);

        try {
            engine.eval("print('Script Variables « expose java objects as variable to script.', strJS)");

            // javax.script.Invocable is an optional interface.
            Invocable inv = (Invocable) engine;

            // JavaScript code in a String
            String functions = "function functionName( functionParam ) { print('Hello, ' + functionParam); }";
            engine.eval(functions);
            // invoke the global function named "functionName"
            inv.invokeFunction("functionName", "function Param value!!" );

            // evaluate a script string. The script accesses "file" variable and calls method on it
            engine.eval("print(file.getAbsolutePath())");
            // evaluate JavaScript code from given file - specified by first argument
            engine.eval( new java.io.FileReader( file ) );

            String[] typedArray = (String[]) inv.invokeFunction("splitasJavaArray", str );
            System.out.println("File : Function returns an array : "+ typedArray[1] );

            ScriptObjectMirror scriptObject = (ScriptObjectMirror) inv.invokeFunction("splitasJavaScriptArray", str, separator );
            System.out.println("File : Function return script obj : "+ convert( scriptObject ) );

            Object eval = engine.eval("(function() {return ['a', 'b'];})()");
            Object result = convert(eval);
            System.out.println("Result: {}"+ result);

            // JavaScript code in a String. This code defines a script object 'obj' with one method called 'hello'.
            String objectFunction = "var obj = new Object(); obj.hello = function(name) { print('Hello, ' + name); }";
            engine.eval(objectFunction);
            // get script object on which we want to call the method
            Object object = engine.get("obj");
            inv.invokeMethod(object, "hello", "Yash !!" );

            Object fileObjectFunction = engine.get("objfile");
            inv.invokeMethod(fileObjectFunction, "hello", "Yashwanth !!" );
        } catch (ScriptException e) {
            e.printStackTrace();
        } catch (NoSuchMethodException e) {
            e.printStackTrace();
        } catch (FileNotFoundException e) {
            e.printStackTrace();
        }
    }

    public static Object convert(final Object obj) {
        System.out.println("\tJAVASCRIPT OBJECT: {}"+ obj.getClass());
        if (obj instanceof Bindings) {
            try {
                final Class<?> cls = Class.forName("jdk.nashorn.api.scripting.ScriptObjectMirror");
                System.out.println("\tNashorn detected");
                if (cls.isAssignableFrom(obj.getClass())) {
                    final Method isArray = cls.getMethod("isArray");
                    final Object result = isArray.invoke(obj);
                    if (result != null && result.equals(true)) {
                        final Method values = cls.getMethod("values");
                        final Object vals = values.invoke(obj);
                        System.err.println( vals );
                        if (vals instanceof Collection<?>) {
                            final Collection<?> coll = (Collection<?>) vals;
                            Object[] array = coll.toArray(new Object[0]);
                            return array;
                        }
                    }
                }
            } catch (ClassNotFoundException | NoSuchMethodException | SecurityException
                    | IllegalAccessException | IllegalArgumentException | InvocationTargetException e) {
            }
        }
        if (obj instanceof List<?>) {
            final List<?> list = (List<?>) obj;
            Object[] array = list.toArray(new Object[0]);
            return array;
        }
        return obj;
    }
}

JavaScript file « StringSplit.js

// var str = 'angular.1.5.6.js', separator = ".";
function splitasJavaArray( str ) {
  var result = str.replace(/\.([^.]+)$/, ':$1').split(':');
  print('Regex Split : ', result);
  var JavaArray = Java.to(result, "java.lang.String[]");
  return JavaArray;
  // return result;
}
function splitasJavaScriptArray( str, separator) {
    var arr = str.split( separator ); // Split the string using dot as separator
    var lastVal = arr.pop(); // remove from the end
    var firstVal = arr.shift(); // remove from the front
    var middleVal = arr.join( separator ); // Re-join the remaining substrings

    var mainArr = new Array();
    mainArr.push( firstVal ); // add to the end
    mainArr.push( middleVal );
    mainArr.push( lastVal );

    return mainArr;
}

var objfile = new Object();
objfile.hello = function(name) { print('File : Hello, ' + name); }

• JavaScript Array constructor or array literal.

Another option is to use the whereis command.

E.g. whereis my.cnf

Alternatively, you could write out the number of elements first (as a header) using:

out.writeInt(prices.length);

When you read the file, you first read the header (element count):

int elementCount = in.readInt();

for (int i = 0; i < elementCount; i++) {
     // read elements
}

I originally wrote this answer when TypeScript was still hot-off-the-presses. Five years later, this is an OK overview, but look at Lodewijk's answer below for more depth

1000ft view...

TypeScript is a superset of JavaScript which primarily provides optional static typing, classes and interfaces. One of the big benefits is to enable IDEs to provide a richer environment for spotting common errors as you type the code.

To get an idea of what I mean, watch Microsoft's introductory video on the language.

For a large JavaScript project, adopting TypeScript might result in more robust software, while still being deployable where a regular JavaScript application would run.

It is open source, but you only get the clever Intellisense as you type if you use a supported IDE. Initially, this was only Microsoft's Visual Studio (also noted in blog post from Miguel de Icaza). These days, other IDEs offer TypeScript support too.

Are there other technologies like it?

There's CoffeeScript, but that really serves a different purpose. IMHO, CoffeeScript provides readability for humans, but TypeScript also provides deep readability for tools through its optional static typing (see this recent blog post for a little more critique). There's also Dart but that's a full on replacement for JavaScript (though it can produce JavaScript code)

Example

As an example, here's some TypeScript (you can play with this in the TypeScript Playground)

class Greeter {
    greeting: string;
    constructor (message: string) {
        this.greeting = message;
    }
    greet() {
        return "Hello, " + this.greeting;
    }
}  

And here's the JavaScript it would produce

var Greeter = (function () {
    function Greeter(message) {
        this.greeting = message;
    }
    Greeter.prototype.greet = function () {
        return "Hello, " + this.greeting;
    };
    return Greeter;
})();

Notice how the TypeScript defines the type of member variables and class method parameters. This is removed when translating to JavaScript, but used by the IDE and compiler to spot errors, like passing a numeric type to the constructor.

It's also capable of inferring types which aren't explicitly declared, for example, it would determine the greet() method returns a string.

Debugging TypeScript

Many browsers and IDEs offer direct debugging support through sourcemaps. See this Stack Overflow question for more details: Debugging TypeScript code with Visual Studio

Want to know more?

I originally wrote this answer when TypeScript was still hot-off-the-presses. Check out Lodewijk's answer to this question for some more current detail.

Create a new Table With Different name and same columns, Primary Key and Foreign Key association and link this in your Insert statement of code. For E.g : For EMPLOYEE, replace with EMPLOYEES.

CREATE TABLE EMPLOYEES(

    EmpId        INT NOT NULL IDENTITY(1,1), 
    F_Name       VARCHAR(20) ,
    L_Name       VARCHAR(20) ,
    DOB          DATE ,
    DOJ          DATE ,
    PRIMARY KEY (EmpId),
    DeptId int FOREIGN KEY REFERENCES DEPARTMENT(DeptId),
    DesgId int FOREIGN KEY REFERENCES DESIGNATION(DesgId),
    AddId int FOREIGN KEY REFERENCES ADDRESS(AddId)   
) 

However, you have to either delete the existing EMPLOYEE Table or do some adjustment according to your requirement.

In my case, this error happened because my HTML had a trailing linebreak.

var myHtml = '<p>\
    This should work.\
    But does not.\
</p>\
';

jQuery('.something').append(myHtml); // this causes the error

To avoid the error, you just need to trim the HTML.

jQuery('.something').append(jQuery.trim(myHtml)); // this works

Did you try df.groupby('id').head(2)

Ouput generated:

>>> df.groupby('id').head(2)
       id  value
id             
1  0   1      1
   1   1      2 
2  3   2      1
   4   2      2
3  7   3      1
4  8   4      1

(Keep in mind that you might need to order/sort before, depending on your data)

EDIT: As mentioned by the questioner, use df.groupby('id').head(2).reset_index(drop=True) to remove the multindex and flatten the results.

>>> df.groupby('id').head(2).reset_index(drop=True)
    id  value
0   1      1
1   1      2
2   2      1
3   2      2
4   3      1
5   4      1

Rxjs v 6.*

It got simplified with newer version of rxjs .

1) Operators

import {map} from 'rxjs/operators';

2) Others

import {Observable,of, from } from 'rxjs';

Instead of chaining we need to pipe . For example

Old syntax :

source.map().switchMap().subscribe()

New Syntax:

source.pipe(map(), switchMap()).subscribe()

Note: Some operators have a name change due to name collisions with JavaScript reserved words! These include:

do -> tap,

catch -> catchError

switch -> switchAll

finally -> finalize

Rxjs v 5.*

I am writing this answer partly to help myself as I keep checking docs everytime I need to import an operator . Let me know if something can be done better way.

1) import { Rx } from 'rxjs/Rx';

This imports the entire library. Then you don't need to worry about loading each operator . But you need to append Rx. I hope tree-shaking will optimize and pick only needed funcionts( need to verify ) As mentioned in comments , tree-shaking can not help. So this is not optimized way.

public cache = new Rx.BehaviorSubject('');

Or you can import individual operators .

This will Optimize your app to use only those files :

2) import { _______ } from 'rxjs/_________';

This syntax usually used for main Object like Rx itself or Observable etc.,

Keywords which can be imported with this syntax

 Observable, Observer, BehaviorSubject, Subject, ReplaySubject

3) import 'rxjs/add/observable/__________';

Update for Angular 5

With Angular 5, which uses rxjs 5.5.2+

import { empty } from 'rxjs/observable/empty';
import { concat} from 'rxjs/observable/concat';

These are usually accompanied with Observable directly. For example

Observable.from()
Observable.of()

Other such keywords which can be imported using this syntax:

concat, defer, empty, forkJoin, from, fromPromise, if, interval, merge, of, 
range, throw, timer, using, zip

4) import 'rxjs/add/operator/_________';

Update for Angular 5

With Angular 5, which uses rxjs 5.5.2+

import { filter } from 'rxjs/operators/filter';
import { map } from 'rxjs/operators/map';

These usually come in the stream after the Observable is created. Like flatMap in this code snippet:

Observable.of([1,2,3,4])
          .flatMap(arr => Observable.from(arr));

Other such keywords using this syntax:

audit, buffer, catch, combineAll, combineLatest, concat, count, debounce, delay, 
distinct, do, every, expand, filter, finally, find , first, groupBy,
ignoreElements, isEmpty, last, let, map, max, merge, mergeMap, min, pluck, 
publish, race, reduce, repeat, scan, skip, startWith, switch, switchMap, take, 
takeUntil, throttle, timeout, toArray, toPromise, withLatestFrom, zip

FlatMap: flatMap is alias to mergeMap so we need to import mergeMap to use flatMap.

Note for /add imports :

We only need to import once in whole project. So its advised to do it at a single place. If they are included in multiple files, and one of them is deleted, the build will fail for wrong reasons.

"bigEnough" array is a bit of a stretch. Sure, buffer needs to be "big ebough" but proper design of an application should include transactions and delimiters. In this configuration each transaction would have a preset length thus your array would anticipate certain number of bytes and insert it into correctly sized buffer. Delimiters would ensure transaction integrity and would be supplied within each transaction. To make your application even better, you could use 2 channels (2 sockets). One would communicate fixed length control message transactions that would include information about size and sequence number of data transaction to be transferred using data channel. Receiver would acknowledge buffer creation and only then data would be sent. If you have no control over stream sender than you need multidimensional array as a buffer. Component arrays would be small enough to be manageable and big enough to be practical based on your estimate of expected data. Process logic would seek known start delimiters and then ending delimiter in subsequent element arrays. Once ending delimiter is found, new buffer would be created to store relevant data between delimiters and initial buffer would have to be restructured to allow data disposal.

As far as a code to convert stream into byte array is one below.

Stream s = yourStream;
int streamEnd = Convert.ToInt32(s.Length);
byte[] buffer = new byte[streamEnd];
s.Read(buffer, 0, streamEnd);

You want to use transform this will return a Series with the index aligned to the df so you can then add it as a new column:

In [74]:

df = pd.DataFrame({'Date': ['2015-05-08', '2015-05-07', '2015-05-06', '2015-05-05', '2015-05-08', '2015-05-07', '2015-05-06', '2015-05-05'], 'Sym': ['aapl', 'aapl', 'aapl', 'aapl', 'aaww', 'aaww', 'aaww', 'aaww'], 'Data2': [11, 8, 10, 15, 110, 60, 100, 40],'Data3': [5, 8, 6, 1, 50, 100, 60, 120]})
?
df['Data4'] = df['Data3'].groupby(df['Date']).transform('sum')
df
Out[74]:
   Data2  Data3        Date   Sym  Data4
0     11      5  2015-05-08  aapl     55
1      8      8  2015-05-07  aapl    108
2     10      6  2015-05-06  aapl     66
3     15      1  2015-05-05  aapl    121
4    110     50  2015-05-08  aaww     55
5     60    100  2015-05-07  aaww    108
6    100     60  2015-05-06  aaww     66
7     40    120  2015-05-05  aaww    121

Use fabs instead of abs to find absolute value of double (or float) data types. Include the <math.h> header for fabs function.

double d1 = fabs(-3.8951);

You will need to have a datetime column in a table. Then you can do an insert like the following to insert the current date:

INSERT INTO MyTable (MyDate) Values (GetDate())

If it is not today's date then you should be able to use a string and specify the date format:

INSERT INTO MyTable (MyDate) Values (Convert(DateTime,'19820626',112)) --6/26/1982

You do not always need to convert the string either, often you can just do something like:

INSERT INTO MyTable (MyDate) Values ('06/26/1982') 

And SQL Server will figure it out for you.

You can do this:

CSS:

#container {
    height:175px;
}

#container h3{
    position:absolute;
    bottom:0;
    left:0;
}

Then in HTML:

<div class="row">
    <div class="col-sm-6">
        <img src="//placehold.it/600x300" alt="Logo" />
    </div>
    <div id="container" class="col-sm-6">
        <h3>Some Text</h3>
    </div>
</div>

EDIT: add the <

None of the solutions listed here worked in my situation. My solution was to use a while loop, attempting to delete the file, with a 5 second (configurable) limit for safety.

File f = new File("/path/to/file");

int limit = 20; //Only try for 5 seconds, for safety
while(!f.delete() && limit > 0){
    synchronized(this){
        try {
            this.wait(250); //Wait for 250 milliseconds
        } catch (InterruptedException e) {
            e.printStackTrace();
        }
    }
    limit--;
}

Using the above loop worked without having to do any manual garbage collecting or setting the stream to null, etc.

By using to_string

print(df.Name.to_string(index=False))


 Adam
  Bob
Cathy

If you're using Windows you should follow up on Advanced System Settings to check the env vars declared over there, you should notice that the proxy configuration may lie within environment variables, like in the picture below:

So if your proxy server is not available or is blocking traffic from npm you might notice the aforementioned error in this topic. Maybe you don't need any proxy at all, in this case, just remove this HTTP_PROXY env variables.

I had turned all proxy configurations off in my Windows and npm settings, however, npm was still getting timeout and connection errors while downloading resources, then I figured out there was still a proxy configuration left on env variables, which was causing all the trouble.

Considering a part of a Comment made by @SSilk my end goal has really been to get everything to the right of that last occurence an alternative approach with a very simple formula is to copy a column (say A) of strings and on the copy (say ColumnB) apply Find and Replace. For instance taking the example: Drive:\Folder\SubFolder\Filename.ext

This returns what remains (here Filename.ext) after the last instance of whatever character is chosen (here \) which is sometimes the objective anyway and facilitates finding the position of the last such character with a short formula such as:

=FIND(B1,A1)-1

x86 means Intel 80x86 compatible. This used to include the 8086, a 16-bit only processor. Nowadays it roughly means any CPU with a 32-bit Intel compatible instruction set (usually anything from Pentium onwards). Never read x32 being used.

x64 means a CPU that is x86 compatible but has a 64-bit mode as well (most often the 64-bit instruction set as introduced by AMD is meant; Intel's idea of a 64-bit mode was totally stupid and luckily Intel admitted that and is now using AMDs variant).

So most of the time you can simplify it this way: x86 is Intel compatible in 32-bit mode, x64 is Intel compatible in 64-bit mode.

What you are doing is correct, the problem is somewhere else, e.g. the cookie is being set again somehow on refresh.

{
isloading? progressIos:Container()

progressIos(int i) {
    return Container(
        color: i == 1
            ? AppColors.liteBlack
            : i == 2 ? AppColors.darkBlack : i == 3 ? AppColors.pinkBtn : '',
        child: Center(child: CupertinoActivityIndicator()));
  }
}

For anyone trying to do this using mysql workbench or sequel pro these are the inputs:

Mysql Host: 192.168.56.101 (or ip that you choose for it)
username: root (or mysql username u created)
password: **** (your mysql password)
database: optional
port: optional (unless you chose another port, defaults to 3306)

ssh host: 192.168.56.101 (or ip that you choose for this vm, like above)
ssh user: vagrant (vagrants default username)
ssh password: vagrant (vagrants default password)
ssh port: optional (unless you chose another)

source: https://coderwall.com/p/yzwqvg

I ended up here when trying to get GuzzleHttp (php+apache on Mac) to get a page from www.googleapis.com.

Here was my final solution in case it helps anyone.

Look at the certificate chain for whatever domain is giving you this error. For me it was googleapis.com

openssl s_client -host www.googleapis.com -port 443

You'll get back something like this:

Certificate chain
 0 s:/C=US/ST=California/L=Mountain View/O=Google Inc/CN=*.googleapis.com
   i:/C=US/O=Google Inc/CN=Google Internet Authority G2
 1 s:/C=US/O=Google Inc/CN=Google Internet Authority G2
   i:/C=US/O=GeoTrust Inc./CN=GeoTrust Global CA
 2 s:/C=US/O=GeoTrust Inc./CN=GeoTrust Global CA
   i:/C=US/O=Equifax/OU=Equifax Secure Certificate Authority

Note: I captured this after I fixed the issue, to your chain output may look different.

Then you need to look at the certificates allowed in php. Run phpinfo() in a page.

<?php echo phpinfo();

Then look for the certificate file that's loaded from the page output:

openssl.cafile  /usr/local/php5/ssl/certs/cacert.pem

This is the file you'll need to fix by adding the correct certificate(s) to it.

sudo nano /usr/local/php5/ssl/certs/cacert.pem

You basically need to append the correct certificate "signatures" to the end of this file.

You can find some of them here: You may need to google/search for others in the chain if you need them.

• https://pki.google.com/
• https://www.geotrust.com/resources/root-certificates/index.html

They look like this:

(Note: This is an image so people will not simply copy/paste certificates from stackoverflow)

Once the right certificates are in this file, restart apache and test.

stage.getIcons().add(new Image(ClassLoader.getSystemResourceAsStream("images/icon.png")));

images folder need to be in Resource folder.

Note that your main arguments are not correct. The standard form should be:

int main(int argc, char *argv[])

or equivalently:

int main(int argc, char **argv)

There are many ways to achieve the conversion. This is one approach:

#include <sstream>

int main(int argc, char *argv[])
{
    if (argc >= 2)
    {
        std::istringstream iss( argv[1] );
        int val;

        if (iss >> val)
        {
            // Conversion successful
        }
    }

    return 0;
}

It depends on whether the setting you have chosen is at "User" scope or "Application" scope.

User scope

User scope settings are stored in

C:\Documents and Settings\ username \Local Settings\Application Data\ ApplicationName

You can read/write them at runtime.

For Vista and Windows 7, folder is

C:\Users\ username \AppData\Local\ ApplicationName

or

C:\Users\ username \AppData\Roaming\ ApplicationName

Application scope

Application scope settings are saved in AppName.exe.config and they are readonly at runtime.

Looks to be more efficient to add the recognizer directly to the cell as shown here:

Tap&Hold for TableView Cells, Then and Now

(scroll to the example at the bottom)

A slightly different approach is to create your formula from a string. In the formula help page you will find the following example :

## Create a formula for a model with a large number of variables:
xnam <- paste("x", 1:25, sep="")
fmla <- as.formula(paste("y ~ ", paste(xnam, collapse= "+")))

Then if you look at the generated formula, you will get :

R> fmla
y ~ x1 + x2 + x3 + x4 + x5 + x6 + x7 + x8 + x9 + x10 + x11 + 
    x12 + x13 + x14 + x15 + x16 + x17 + x18 + x19 + x20 + x21 + 
    x22 + x23 + x24 + x25

Just add to @Bert's solution to make it more clear:

    const routes = [
  { path: '/foo', component: Foo },
  { path: '/bar', component: Bar }
]

const router = new VueRouter({
  routes,
  linkExactActiveClass: "active" // active class for *exact* links.
})

As one can see, this line should be removed:

linkActiveClass: "active", // active class for non-exact links.

this way, ONLY the current link is hi-lighted. This should apply to most of the cases.

David

Be careful when using an IDE's code-completion to add the import for @Test.

It has to be import org.junit.Test and not import org.testng.annotations.Test, for example. If you do the latter, you'll get the "no runnable methods" error.

Just posting the Array syntax for same column OR queries to help peeps out.

Person.where(name: ["John", "Steve"])

Remove the quotes surrounding 0 and it will work.

Working Code Snippet:

// set minDate to 0 for today's date_x000D_
$('#datepicker').datepicker({ minDate: 0 });

body {_x000D_
    font-size: 12px; /* just so that it doesn't default to 16px (which is kinda huge) */_x000D_
}

<!-- load jQuery and jQuery UI -->_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.4/jquery.min.js"></script>_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jqueryui/1.11.4/jquery-ui.min.js"></script>_x000D_
_x000D_
<!-- load jQuery UI CSS theme -->_x000D_
<link rel="stylesheet" href="https://ajax.googleapis.com/ajax/libs/jqueryui/1.11.4/themes/smoothness/jquery-ui.css">_x000D_
_x000D_
<!-- the datepicker input -->_x000D_
<input type='text' id='datepicker' placeholder='Select date' />

You almost got it. It should be this:

<input type="radio" name="group1" id="r1" value="1" />_x000D_
<label for="r1"> button one</label>

The value in for should be the id of the element you are labeling.

RAISERROR with severity 20 will report as error in Event Viewer.

You can use SET PARSEONLY ON; (or NOEXEC). At the end of script use GO SET PARSEONLY OFF;

SET PARSEONLY ON;
-- statement between here will not run

SELECT 'THIS WILL NOT EXEC';

GO
-- statement below here will run

SET PARSEONLY OFF;

To save $4.99 for a one time use and no dealing with HomeBrew and no counting empty lines.

1. Open Terminal
2. cd to your Xcode project
3. Execute the following when inside your target project:

find . -name "*.swift" -print0 | xargs -0 wc -l

If you want to exclude pods:

find . -path ./Pods -prune -o -name "*.swift" -print0 ! -name "/Pods" | xargs -0 wc -l

If your project has objective c and swift:

find . -type d \( -path ./Pods -o -path ./Vendor \) -prune -o \( -iname \*.m -o -iname \*.mm -o -iname \*.h -o -iname \*.swift \) -print0 | xargs -0 wc -l

The variable mean_data is a nested list, in Python accessing a nested list cannot be done by multi-dimensional slicing, i.e.: mean_data[1,2], instead one would write mean_data[1][2].

This is becausemean_data[2] is a list. Further indexing is done recursively - since mean_data[2] is a list, mean_data[2][0] is the first index of that list.

Additionally, mean_data[:][0] does not work because mean_data[:] returns mean_data.

The solution is to replace the array ,or import the original data, as follows:

mean_data = np.array(mean_data)

numpy arrays (like MATLAB arrays and unlike nested lists) support multi-dimensional slicing with tuples.

You are using ES6 Module syntax.

This means your environment (e.g. node.js) must support ES6 Module syntax.

NodeJS uses CommonJS Module syntax (module.exports) not ES6 module syntax (export keyword).

Solution:

• Use babel npm package to transpile your ES6 to a commonjs target

or

• Refactor with CommonJS syntax.

Examples of CommonJS syntax are (from flaviocopes.com/commonjs/):

• exports.uppercase = str => str.toUpperCase()
• exports.a = 1

To install TypeScript local in project as a development dependency you can use --save-dev key

npm install --save-dev typescript

It's also writes the typescript into your package.json

You also need to have a tsconfig.json file. For example

{
  "compilerOptions": {
    "target": "ES5",
    "module": "system",
    "moduleResolution": "node",
    "sourceMap": true,
    "emitDecoratorMetadata": true,
    "experimentalDecorators": true,
    "removeComments": false,
    "noImplicitAny": false
  },
  "exclude": [
    "node_modules",
    ".npm"
  ]
}

For more information about the tsconfig you can see here http://www.typescriptlang.org/docs/handbook/tsconfig-json.html

If you want to delete all rows of a table, you can execute sql command

using (var context = new DataDb())
{
     context.Database.ExecuteSqlCommand("TRUNCATE TABLE [TableName]");
}

TRUNCATE TABLE (Transact-SQL) Removes all rows from a table without logging the individual row deletions. TRUNCATE TABLE is similar to the DELETE statement with no WHERE clause; however, TRUNCATE TABLE is faster and uses fewer system and transaction log resources.

I had a similar error and the issue was that I had some escaped quotes in my csv file and needed to set the escapechar parameter appropriately.

You Can use this code to read line by line in text file and You could also check about the first character is "*" then you can leave that..

Public Sub Test()

    Dim ReadData as String

    Open "C:\satheesh\myfile\file.txt" For Input As #1

    Do Until EOF(1) 
       Line Input #1, ReadData 'Adding Line to read the whole line, not only first 128 positions
    If Not Left(ReadData, 1) = "*" then
       '' you can write the variable ReadData into the database or file
    End If 

    Loop

    Close #1

End Sub

Because comparison doesn't work that way. 'Y' || 'y' is a logical-or operator; it returns 1 (true) if either of its arguments is true. Since 'Y' and 'y' are both true, you're comparing *answer with 1.

What you want is if(*answer == 'Y' || *answer == 'y') or perhaps:

switch (*answer) {
  case 'Y':
  case 'y':
    /* Code for Y */
    break;
  default:
    /* Code for anything else */
}

If you don't understand Windows Installer then I highly recommend The Definitive Guide to Windows Installer. You can't really use WiX without understanding MSI. Also worth downloading is the Windows Installer 4.5 SDK.

If you don't want to learn the Windows Installer fundamentals, then you'll need some wizard type package to hide all the nitty gritty details and hold your hand. There are plenty of options, some more expensive than others.

• InstallShield
• Advanced Installer
• MSI Factory
• etc..

However still I'd suggest picking up the above book and taking some time to understand what's going on "under the hood", it'll really help you figure out what's going wrong when customers start complaining that something is broken with the setup :)

When it comes to applications that run on a server, including web sites and other back-end services, the time zone setting of the server should be ignored by the application.

The common advice is to set the server's time zone to UTC. This is indeed a good best practice, but it's there as a band-aid for applications that do not follow other best practices. For example, a service might be writing to log files with local timestamps instead of UTC-based timestamps, thus creating ambiguities during the daylight saving time fall-back transition. Setting the server's time zone to UTC will fix that application. However the real fix would be for the application to log using UTC to begin with.

Server-side code, including web sites, should never expect the local time zone of the server to be anything in particular.

In some languages, the local time zone can easily creep in to application code. For example, the DateTime.ToUniversalTime method in .NET will convert from the local time zone to UTC, and the DateTime.Now property returns the current time in the local time zone. Also, the Date constructor in JavaScript uses the computer's local time zone. There are many other examples like this. It is important to practice defensive programming, avoiding any code that uses the computer's local time zone setting.

Reserve using the local time zone for client-side code, such as desktop applications, mobile applications, and client-side JavaScript.

Yes use os.path.isdir(path)

Set the minOccurs attribute to 0 in the schema like so:

<?xml version="1.0"?>
  <xs:schema version="1.0" xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
    <xs:element name="request">
        <xs:complexType>
            <xs:sequence>
                <xs:element name="amenity">
                    <xs:complexType>
                        <xs:sequence>
                            <xs:element name="description" type="xs:string" minOccurs="0" />
                        </xs:sequence>
                    </xs:complexType>
                </xs:element>
            </xs:sequence>
        </xs:complexType>
    </xs:element> </xs:schema>

Use @RequestParam in your method arguments so Spring can bind them, also use the @RequestMapping.params array to narrow the method that will be used by spring. Sample code:

@RequestMapping("/userGrid", 
params = {"_search", "nd", "rows", "page", "sidx", "sort"})
public @ResponseBody GridModel getUsersForGrid(
@RequestParam(value = "_search") String search, 
@RequestParam(value = "nd") int nd, 
@RequestParam(value = "rows") int rows, 
@RequestParam(value = "page") int page, 
@RequestParam(value = "sidx") int sidx, 
@RequestParam(value = "sort") Sort sort) {
// Stuff here
}

This way Spring will only execute this method if ALL PARAMETERS are present saving you from null checking and related stuff.

The simplest way that doesn't require third party libraries it to create a URL object and then call either openConnection or openStream on it. Note that this is a pretty basic API, so you won't have a lot of control over the headers.

Example with Unix-style file name:

COPY (SELECT * FROM tbl) TO '/var/lib/postgres/myfile1.csv' format csv;

Read the manual about COPY (link to version 8.2).
You have to use an absolute path for the target file. Be sure to double quote file names with spaces. Example for MS Windows:

COPY (SELECT * FROM tbl)
TO E'"C:\\Documents and Settings\\Tech\Desktop\\myfile1.csv"' format csv;

In PostgreSQL 8.2, with standard_conforming_strings = off per default, you need to double backslashes, because \ is a special character and interpreted by PostgreSQL. Works in any version. It's all in the fine manual:

filename

 The absolute path name of the input or output file. Windows users might need to use an E'' string and double backslashes used as path separators.

Or the modern syntax with standard_conforming_strings = on (default since Postgres 9.1):

COPY tbl  -- short for (SELECT * FROM tbl)
TO '"C:\Documents and Settings\Tech\Desktop\myfile1.csv"' (format csv);

Or you can also use forward slashes for filenames under Windows.

An alternative is to use the meta-command \copy of the default terminal client psql.

You can also use a GUI like pgadmin and copy / paste from the result grid to Excel for small queries.

Closely related answer:

• Copy results from a PostgreSQL view in one DB to a table in another

Similar solution for MySQL:

• Exporting MYSQL data into Excel/CSV via php

This really needs to be added to the documentation, which is why I filed an issue about it a few months ago...

You need some 32-bit binaries, and you have a 64-bit OS version (apparently). Try:

sudo apt-get install lib32z1 lib32ncurses5 lib32bz2-1.0 lib32stdc++6

That worked for me on Ubuntu 14.10.

UPDATE 2017-12-16: The details will vary by Linux distro and version. So for example, this answer covers newer Ubuntu versions.

You can use phpseclib, a pure PHP RSA implementation:

<?php
include('Crypt/RSA.php');

$privatekey = file_get_contents('private.key');

$rsa = new Crypt_RSA();
$rsa->loadKey($privatekey);

$plaintext = new Math_BigInteger('aaaaaa');
echo $rsa->_exponentiate($plaintext)->toBytes();
?>

You certainly are able to have multiple CTEs in a single query expression. You just need to separate them with a comma. Here is an example. In the example below, there are two CTEs. One is named CategoryAndNumberOfProducts and the second is named ProductsOverTenDollars.

WITH CategoryAndNumberOfProducts (CategoryID, CategoryName, NumberOfProducts) AS
(
   SELECT
      CategoryID,
      CategoryName,
      (SELECT COUNT(1) FROM Products p
       WHERE p.CategoryID = c.CategoryID) as NumberOfProducts
   FROM Categories c
),

ProductsOverTenDollars (ProductID, CategoryID, ProductName, UnitPrice) AS
(
   SELECT
      ProductID,
      CategoryID,
      ProductName,
      UnitPrice
   FROM Products p
   WHERE UnitPrice > 10.0
)

SELECT c.CategoryName, c.NumberOfProducts,
      p.ProductName, p.UnitPrice
FROM ProductsOverTenDollars p
   INNER JOIN CategoryAndNumberOfProducts c ON
      p.CategoryID = c.CategoryID
ORDER BY ProductName

Having consistent line endings is a good thing. For example it will not trigger unnecessary merges, albeit trivial. I have seen Visual Studio create files with mixed line endings.

Also some programs like bash (on linux) do require that .sh files are LF terminated.

To make sure this happens you can use gitattributes. It works on repository level no matter what the value of autcrlf is.

For example you can have .gitattributes like this: * text=auto

You can also be more specific per file type/extension if it did matter in your case.

Then autocrlf can convert line endings for Windows programs locally.

On a mixed C#/C++/Java/Ruby/R, Windows/Linux project this is working well. No issues so far.

You can also use "joblib" for this purpose.

import joblib
print joblib.cpu_count()

This method will give you the number of cpus in the system. joblib needs to be installed though. More information on joblib can be found here https://pythonhosted.org/joblib/parallel.html

Alternatively you can use numexpr package of python. It has lot of simple functions helpful for getting information about the system cpu.

import numexpr as ne
print ne.detect_number_of_cores()

Log2(n) is the maximum number of searches that are required to find something in a binary search. The average case involves log2(n)-1 searches. Here's more info:

http://en.wikipedia.org/wiki/Binary_search#Performance

I used start /b for this instead of just start and it ran without a window for each command, so there was no waiting.

Or you may use Selenium Action Class to simulate user interaction -- For example

    WebDriver = new FirefoxDriver();

    WebElement menu = driver.findElement(By.xpath("")); // the triger event element

    Actions build = new Actions(driver); // heare you state ActionBuider
    build.moveToElement(menu).build().perform(); // Here you perform hover mouse over the needed elemnt to triger the visibility of the hidden
    WebElement m2m= driver.findElement(By.xpath(""));//the previous non visible element
    m2m.click();

For people who still got this FB bug, I use this cheeky fix to this problem.

Instead of http://connect.facebook.net/en_US/all.js, I used HTTPS and changed it into https://connect.facebook.net/en_US/all.js and it fixed my problem.

Just an idea: Use Python as embeddable scripting language to plot your graphs. Python has a plethora of plotting libraries.

First, You will need to import sys

sys - System-specific parameters and functions

This module provides access to certain variables used and maintained by the interpreter, and to functions that interact strongly with the interpreter. This module is still available. I will edit this post in case this module is not working anymore.

And then, you can print the numbers of arguments or what you want here, the list of arguments.

Follow the script below :

#!/usr/bin/python

import sys

print 'Number of arguments entered :' len(sys.argv)

print 'Your argument list :' str(sys.argv)

Then, run your python script :

$ python arguments_List.py chocolate milk hot_Chocolate

And you will have the result that you were asking :

Number of arguments entered : 4
Your argument list : ['arguments_List.py', 'chocolate', 'milk', 'hot_Chocolate']

Hope that helped someone.

I assume due diligence here that you confirmed the CPU is actually consumed by SQL process (perfmon Process category counters would confirm this). Normally for such cases you take a sample of the relevant performance counters and you compare them with a baseline that you established in normal load operating conditions. Once you resolve this problem I recommend you do establish such a baseline for future comparisons.

You can find exactly where is SQL spending every single CPU cycle. But knowing where to look takes a lot of know how and experience. Is is SQL 2005/2008 or 2000 ? Fortunately for 2005 and newer there are a couple of off the shelf solutions. You already got a couple good pointer here with John Samson's answer. I'd like to add a recommendation to download and install the SQL Server Performance Dashboard Reports. Some of those reports include top queries by time or by I/O, most used data files and so on and you can quickly get a feel where the problem is. The output is both numerical and graphical so it is more usefull for a beginner.

I would also recommend using Adam's Who is Active script, although that is a bit more advanced.

And last but not least I recommend you download and read the MS SQL Customer Advisory Team white paper on performance analysis: SQL 2005 Waits and Queues.

My recommendation is also to look at I/O. If you added a load to the server that trashes the buffer pool (ie. it needs so much data that it evicts the cached data pages from memory) the result would be a significant increase in CPU (sounds surprising, but is true). The culprit is usually a new query that scans a big table end-to-end.

I suspect you need a more general answer:

There are no rules on casting pointers in C! The language lets you cast any pointer to any other pointer without comment.

But the thing is: There is no data conversion or whatever done! Its solely your own responsibilty that the system does not misinterpret the data after the cast - which would generally be the case, leading to runtime error.

So when casting its totally up to you to take care that if data is used from a casted pointer the data is compatible!

C is optimized for performance, so it lacks runtime reflexivity of pointers/references. But that has a price - you as a programmer have to take better care of what you are doing. You have to know on your self if what you want to do is "legal"

I'll elaborate a bit more on ChrisR awesome answer and bring images from his awesome reference.

A valid JSON always starts with either curly braces { or square brackets [, nothing else.

{ will start an object:

{ "key": value, "another key": value }

Hint: although javascript accepts single quotes ', JSON only takes double ones ".

[ will start an array:

[value, value]

Hint: spaces among elements are always ignored by any JSON parser.

And value is an object, array, string, number, bool or null:

So yeah, ["a", "b"] is a perfectly valid JSON, like you could try on the link Manish pointed.

Here are a few extra valid JSON examples, one per block:

{}

[0]

{"__comment": "json doesn't accept comments and you should not be commenting even in this way", "avoid!": "also, never add more than one key per line, like this"}

[{   "why":null} ]

{
  "not true": [0, false],
  "true": true,
  "not null": [0, 1, false, true, {
    "obj": null
  }, "a string"]
}

You could find this fiddle useful. Just finished. https://jsfiddle.net/dnviti/ogpt920w/ Code below also:

/** _x000D_
 * Get the ISO week date week number _x000D_
 */  _x000D_
Date.prototype.getWeek = function () {  _x000D_
  // Create a copy of this date object  _x000D_
  var target  = new Date(this.valueOf());  _x000D_
_x000D_
  // ISO week date weeks start on monday  _x000D_
  // so correct the day number  _x000D_
  var dayNr   = (this.getDay() + 6) % 7;  _x000D_
_x000D_
  // ISO 8601 states that week 1 is the week  _x000D_
  // with the first thursday of that year.  _x000D_
  // Set the target date to the thursday in the target week  _x000D_
  target.setDate(target.getDate() - dayNr + 3);  _x000D_
_x000D_
  // Store the millisecond value of the target date  _x000D_
  var firstThursday = target.valueOf();  _x000D_
_x000D_
  // Set the target to the first thursday of the year  _x000D_
  // First set the target to january first  _x000D_
  target.setMonth(0, 1);  _x000D_
  // Not a thursday? Correct the date to the next thursday  _x000D_
  if (target.getDay() != 4) {  _x000D_
    target.setMonth(0, 1 + ((4 - target.getDay()) + 7) % 7);  _x000D_
  }  _x000D_
_x000D_
  // The weeknumber is the number of weeks between the   _x000D_
  // first thursday of the year and the thursday in the target week  _x000D_
  return 1 + Math.ceil((firstThursday - target) / 604800000); // 604800000 = 7 * 24 * 3600 * 1000  _x000D_
}  _x000D_
_x000D_
/** _x000D_
* Get the ISO week date year number _x000D_
*/  _x000D_
Date.prototype.getWeekYear = function ()   _x000D_
{  _x000D_
  // Create a new date object for the thursday of this week  _x000D_
  var target  = new Date(this.valueOf());  _x000D_
  target.setDate(target.getDate() - ((this.getDay() + 6) % 7) + 3);  _x000D_
_x000D_
  return target.getFullYear();  _x000D_
}_x000D_
_x000D_
/** _x000D_
 * Convert ISO week number and year into date (first day of week)_x000D_
 */ _x000D_
var getDateFromISOWeek = function(w, y) {_x000D_
  var simple = new Date(y, 0, 1 + (w - 1) * 7);_x000D_
  var dow = simple.getDay();_x000D_
  var ISOweekStart = simple;_x000D_
  if (dow <= 4)_x000D_
    ISOweekStart.setDate(simple.getDate() - simple.getDay() + 1);_x000D_
  else_x000D_
    ISOweekStart.setDate(simple.getDate() + 8 - simple.getDay());_x000D_
  return ISOweekStart;_x000D_
}_x000D_
_x000D_
var printDate = function(){_x000D_
  /*var dateString = document.getElementById("date").value;_x000D_
 var dateArray = dateString.split("/");*/ // use this if you have year-week in the same field_x000D_
_x000D_
  var dateInput = document.getElementById("date").value;_x000D_
  if (dateInput == ""){_x000D_
    var date = new Date(); // get today date object_x000D_
  }_x000D_
  else{_x000D_
    var date = new Date(dateInput); // get date from field_x000D_
  }_x000D_
_x000D_
  var day = ("0" + date.getDate()).slice(-2); // get today day_x000D_
  var month = ("0" + (date.getMonth() + 1)).slice(-2); // get today month_x000D_
  var fullDate = date.getFullYear()+"-"+(month)+"-"+(day) ; // get full date_x000D_
  var year = date.getFullYear();_x000D_
  var week = ("0" + (date.getWeek())).slice(-2);_x000D_
  var locale= "it-it";_x000D_
  _x000D_
  document.getElementById("date").value = fullDate; // set input field_x000D_
_x000D_
  document.getElementById("year").value = year;_x000D_
  document.getElementById("week").value = week; // this prototype has been written above_x000D_
_x000D_
  var fromISODate = getDateFromISOWeek(week, year);_x000D_
  _x000D_
 var fromISODay = ("0" + fromISODate.getDate()).slice(-2);_x000D_
  var fromISOMonth = ("0" + (fromISODate.getMonth() + 1)).slice(-2);_x000D_
  var fromISOYear = date.getFullYear();_x000D_
  _x000D_
  // Use long to return month like "December" or short for "Dec"_x000D_
  //var monthComplete = fullDate.toLocaleString(locale, { month: "long" }); _x000D_
_x000D_
  var formattedDate = fromISODay + "-" + fromISOMonth + "-" + fromISOYear;_x000D_
_x000D_
  var element = document.getElementById("fullDate");_x000D_
_x000D_
  element.value = formattedDate;_x000D_
}_x000D_
_x000D_
printDate();_x000D_
document.getElementById("convertToDate").addEventListener("click", printDate);

*{_x000D_
  font-family: consolas_x000D_
}

<label for="date">Date</label>_x000D_
<input type="date" name="date" id="date" style="width:130px;text-align:center" value="" />_x000D_
<br /><br />_x000D_
<label for="year">Year</label>_x000D_
<input type="year" name="year" id="year" style="width:40px;text-align:center" value="" />_x000D_
-_x000D_
<label for="week">Week</label>_x000D_
<input type="text" id="week" style="width:25px;text-align:center" value="" />_x000D_
<br /><br />_x000D_
<label for="fullDate">Full Date</label>_x000D_
<input type="text" id="fullDate" name="fullDate" style="width:80px;text-align:center" value="" />_x000D_
<br /><br />_x000D_
<button id="convertToDate">_x000D_
Convert Date_x000D_
</button>

It's pure JS. There are a bunch of date functions inside that allow you to convert date into week number and viceversa :)

From the Oracle documentation page about multiple inheritance type,we can find the accurate answer here. Here we should first know the type of multiple inheritance in java:-

1. Multiple inheritance of state.
2. Multiple inheritance of implementation.
3. Multiple inheritance of type.

Java "doesn't support the multiple inheritance of state, but it support multiple inheritance of implementation with default methods since java 8 release and multiple inheritance of type with interfaces.

Then here the question arises for "diamond problem" and how Java deal with that:-

1. In case of multiple inheritance of implementation java compiler gives compilation error and asks the user to fix it by specifying the interface name. Example here:-

               interface A {
                   void method();
               }
   
               interface B extends A {
                   @Override
                   default void method() {
                       System.out.println("B");
                   }
               }
   
               interface C extends A { 
                   @Override
                   default void method() {
                       System.out.println("C");
                   }
               }
   
               interface D extends B, C {
   
               }
   

So here we will get error as:- interface D inherits unrelated defaults for method() from types B and C interface D extends B, C

You can fix it like:-

interface D extends B, C {
                @Override
                default void method() {
                    B.super.method();
                }
            }

2. In multiple inheritance of type java allows it because interface doesn't contain mutable fields and only one implementation will belong to the class so java doesn't give any issue and it allows you to do so.

In Conclusion we can say that java doesn't support multiple inheritance of state but it does support multiple inheritance of implementation and multiple inheritance of type.

According to the documentation of the PropertyFile task, you can append the generated properties to an existing file. You could have a properties file with just the comment line, and have the Ant task append the generated properties.

Due to PermGen removal some options were removed (like -XX:MaxPermSize), but options -Xms and -Xmx work in Java 8. It's possible that under Java 8 your application simply needs somewhat more memory. Try to increase -Xmx value. Alternatively you can try to switch to G1 garbage collector using -XX:+UseG1GC.

Note that if you use any option which was removed in Java 8, you will see a warning upon application start:

$ java -XX:MaxPermSize=128M -version
Java HotSpot(TM) 64-Bit Server VM warning: ignoring option MaxPermSize=128M; support was removed in 8.0
java version "1.8.0_25"
Java(TM) SE Runtime Environment (build 1.8.0_25-b18)
Java HotSpot(TM) 64-Bit Server VM (build 25.25-b02, mixed mode)

Make your action empty. You don't need to set the onclick attribute, that's only javascript. When you click your submit button, it will reload your page with input from the form. So write your PHP code at the top of the form.

<?php
if( isset($_GET['submit']) )
{
    //be sure to validate and clean your variables
    $val1 = htmlentities($_GET['val1']);
    $val2 = htmlentities($_GET['val2']);

    //then you can use them in a PHP function. 
    $result = myFunction($val1, $val2);
}
?>

<?php if( isset($result) ) echo $result; //print the result above the form ?>

<form action="" method="get">
    Inserisci number1: 
    <input type="text" name="val1" id="val1"></input>

    <?php echo "ciaoooo"; ?>

    <br></br>
    Inserisci number2:
    <input type="text" name="val2" id="val2"></input>

    <br></br>

    <input type="submit" name="submit" value="send"></input>
</form>

You can do it with plain JavaScript:

alert('123-4-'.substr(0, 4)); // outputs "123-"

This returns the first four characters of your string (adjust 4 to suit your needs).

You Can use this -

Suppose we have a list, l = [1,2,3,4,5]

We want to delete last two items in a single statement

del l[3:]

We have output:

l = [1,2,3]

Keep it Simple

The site you linked uses a combination of CSS tricks to pull this off. First, it uses a background-image for the <input> element. Then, in order to push the cursor over, it uses padding-left.

In other words, they have these two CSS rules:

background: url(images/comment-author.gif) no-repeat scroll 7px 7px;
padding-left:30px;

Principled Design of the Modern Web Architecture by Roy T. Fielding and Richard N. Taylor, i.e. sequence of works from all REST terminology came from, contains definition of client-server interaction:

All REST interactions are stateless. That is, each request contains all of the information necessary for a connector to understand the request, independent of any requests that may have preceded it.

This restriction accomplishes four functions, 1st and 3rd are important in this particular case:

• 1st: it removes any need for the connectors to retain application state between requests, thus reducing consumption of physical resources and improving scalability;
• 3rd: it allows an intermediary to view and understand a request in isolation, which may be necessary when services are dynamically rearranged;

And now lets go back to your security case. Every single request should contains all required information, and authorization/authentication is not an exception. How to achieve this? Literally send all required information over wires with every request.

One of examples how to archeive this is hash-based message authentication code or HMAC. In practice this means adding a hash code of current message to every request. Hash code calculated by cryptographic hash function in combination with a secret cryptographic key. Cryptographic hash function is either predefined or part of code-on-demand REST conception (for example JavaScript). Secret cryptographic key should be provided by server to client as resource, and client uses it to calculate hash code for every request.

There are a lot of examples of HMAC implementations, but I'd like you to pay attention to the following three:

• Authenticating REST Requests for Amazon Simple Storage Service (Amazon S3)
• Answer by Mauriceless on quiestion: "How to implement HMAC Authentication in a RESTful WCF API"
• crypto-js: JavaScript implementations of standard and secure cryptographic algorithms

How it works in practice

If client knows the secret key, then it's ready to operate with resources. Otherwise he will be temporarily redirected (status code 307 Temporary Redirect) to authorize and to get secret key, and then redirected back to the original resource. In this case there is no need to know beforehand (i.e. hardcode somewhere) what the URL to authorize the client is, and it possible to adjust this schema with time.

Hope this will helps you to find the proper solution!

A quick note: Assume.assumeTrue(condition) ignores rest of the steps but passes the test. To fail the test, use org.junit.Assert.fail() inside the conditional statement. Works same like Assume.assumeTrue() but fails the test.

You can float the elements (the map wrapper, and the paragraph), or use inline-block on both of them.

If youR data was in A1:C100 then:

Excel - all versions

=SUMPRODUCT(--(A1:A100="M"),--(C1:C100="Yes"))

Excel - 2007 onwards

=COUNTIFS(A1:A100,"M",C1:C100,"Yes")

You can try this:

var theValue = document.getElementById("demo").getAttribute("value");

i think the simplest way will be to add this css and it will work perfectly.

embed, object, iframe{max-width: 100%;}

A much better way than writing JS is to use native, and it turns to be lighter than what was suggested:

<label>
  <img src="my-image.png">
  <input type="file" name="myfile" style="display:none">
</label>

This way the label is automatically connected to the input that is hidden. Clicking on the label is like clicking on the field.

For .NET 4.6.2 or lower, .NET Core 1.x, and .NET Standard 1.x you need to install the NuGet package System.ValueTuple:

Install-Package "System.ValueTuple"

Or using a package reference in VS 2017:

<PackageReference Include="System.ValueTuple" Version="4.4.0" />

.NET Framework 4.7, .NET Core 2.0, and .NET Standard 2.0 include these types.

See ?merge:

the name "row.names" or the number 0 specifies the row names.

Example:

R> de <- merge(d, e, by=0, all=TRUE)  # merge by row names (by=0 or by="row.names")
R> de[is.na(de)] <- 0                 # replace NA values
R> de
  Row.names   a   b   c   d   e   f   g   h   i  j  k  l  m  n  o  p  q  r  s
1         1 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 11 12 13 14 15 16 17 18 19
2         2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9  1  0  0  0  0  0  0  0  0  0
3         3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0  0 21 22 23 24 25 26 27 28 29
   t
1 20
2  0
3 30

Steps

1. Create a new Activity, for your player(fullscreen) screen with menu options. Run the mediaplayer and UI in different threads.

2. For playing media - In general to play audio/video there is mediaplayer api in android. FILE_PATH is the path of file - may be url(youtube) stream or local file path

    MediaPlayer mp = new MediaPlayer();
       mp.setDataSource(FILE_PATH);
       mp.prepare();
       mp.start();
   

Also check: Android YouTube app Play Video Intent have already discussed this in detail.

You can add property to your model as follows:

    public string DetailsClass { get { return Details.Count > 0 ? "show" : "hide" } }

and then your view will be simpler and will contain no logic at all:

    <div class="details @Model.DetailsClass"/>

This will work even with many classes and will not render class if it is null:

    <div class="@Model.Class1 @Model.Class2"/>

with 2 not null properties will render:

    <div class="class1 class2"/>

if class1 is null

    <div class=" class2"/>

Here is the best tutorial I found over there:

http://www.w3schools.com/php/filter_validate_url.asp

<?php
$url = "http://www.qbaki.com";

// Remove all illegal characters from a url
$url = filter_var($url, FILTER_SANITIZE_URL);

// Validate url
if (filter_var($url, FILTER_VALIDATE_URL) !== false) {
echo("$url is a valid URL");
} else {
echo("$url is not a valid URL");
}
?>

Possible flags:

FILTER_FLAG_SCHEME_REQUIRED - URL must be RFC compliant (like http://example)
FILTER_FLAG_HOST_REQUIRED - URL must include host name (like http://www.example.com)
FILTER_FLAG_PATH_REQUIRED - URL must have a path after the domain name (like www.example.com/example1/)
FILTER_FLAG_QUERY_REQUIRED - URL must have a query string (like "example.php?name=Peter&age=37")

I have a similar scenario, and had no problem connecting after setting the JNLP port as you describe, and adding a single firewall rule allowing a connection on the server using that port. Granted it is a randomly selected client port going to a known server port (a host:ANY -> server:1 rule is needed).

From my reading of the source code, I don't see a way to set the local port to use when making the request from the slave. It's unfortunate, it would be a nice feature to have.

Alternatives:

Use a simple proxy on your client that listens on port N and then does forward all data to the actual Jenkins server on the remote host using a constant local port. Connect your slave to this local proxy instead of the real Jenkins server.

Create a custom Jenkins slave build that allows an option to specify the local port to use.

Remember also if you are using HTTPS via a self-signed certificate, you must alter the configuration jenkins-slave.xml file on the slave to specify the -noCertificateCheck option on the command line.

It documents your intent - you will be storing small numbers, rather than a character.

Also it looks nicer if you're using other typedefs such as uint16_t or int32_t.

Try using this code:

var milisegundos = parseInt(data.replace("/Date(", "").replace(")/", ""));
var newDate = new Date(milisegundos).toLocaleDateString("en-UE");

Enjoy it!

There is no 100% solution to delete browser cookies.

The problem is that cookies are uniquely identified by not just by their key "name" but also their "domain" and "path".

Without knowing the "domain" and "path" of a cookie, you cannot reliably delete it. This information is not available through JavaScript's document.cookie. It's not available through the HTTP Cookie header either!

However, if you know the name, path and domain of a cookie, then you can clear it by setting an empty cookie with an expiry date in the past, for example:

function clearCookie(name, domain, path){
    var domain = domain || document.domain;
    var path = path || "/";
    document.cookie = name + "=; expires=" + +new Date + "; domain=" + domain + "; path=" + path;
};

The correct solution is to store the ZIP Code in the database as a STRING. Despite the fact that it may look like a number, it isn't. It's a code, where each part has meaning.

A number is a thing you do arithmetic on. A ZIP Code is not that.

The Python Tutorial discusses how to use lists.

Storing a list of classes is no different than storing any other objects.

def MyClass(object):
    pass

my_types = [str, int, float, MyClass]

Great suggestion! Here's my reusable take on it:

public class StreamUtils {

    public static <T> Stream<T> asStream(Iterator<T> sourceIterator) {
        return asStream(sourceIterator, false);
    }

    public static <T> Stream<T> asStream(Iterator<T> sourceIterator, boolean parallel) {
        Iterable<T> iterable = () -> sourceIterator;
        return StreamSupport.stream(iterable.spliterator(), parallel);
    }
}

And usage (make sure to statically import asStream):

List<String> aPrefixedStrings = asStream(sourceIterator)
                .filter(t -> t.startsWith("A"))
                .collect(toList());

Maybe this may help you as well. I was having some trouble getting my head wrapped around how socket.io worked, so I tried to boil an example down as much as I could.

I adapted this example from the example posted here: http://socket.io/get-started/chat/

First, start in an empty directory, and create a very simple file called package.json Place the following in it.

{
"dependencies": {}
}

Next, on the command line, use npm to install the dependencies we need for this example

$ npm install --save express socket.io

This may take a few minutes depending on the speed of your network connection / CPU / etc. To check that everything went as planned, you can look at the package.json file again.

$ cat package.json
{
  "dependencies": {
    "express": "~4.9.8",
    "socket.io": "~1.1.0"
  }
}

Create a file called server.js This will obviously be our server run by node. Place the following code into it:

var app = require('express')();
var http = require('http').Server(app);
var io = require('socket.io')(http);

app.get('/', function(req, res){

  //send the index.html file for all requests
  res.sendFile(__dirname + '/index.html');

});

http.listen(3001, function(){

  console.log('listening on *:3001');

});

//for testing, we're just going to send data to the client every second
setInterval( function() {

  /*
    our message we want to send to the client: in this case it's just a random
    number that we generate on the server
  */
  var msg = Math.random();
  io.emit('message', msg);
  console.log (msg);

}, 1000);

Create the last file called index.html and place the following code into it.

<html>
<head></head>

<body>
  <div id="message"></div>

  <script src="/socket.io/socket.io.js"></script>
  <script>
    var socket = io();

    socket.on('message', function(msg){
      console.log(msg);
      document.getElementById("message").innerHTML = msg;
    });
  </script>
</body>
</html>

You can now test this very simple example and see some output similar to the following:

$ node server.js
listening on *:3001
0.9575486415997148
0.7801907607354224
0.665313188219443
0.8101786421611905
0.890920243691653

If you open up a web browser, and point it to the hostname you're running the node process on, you should see the same numbers appear in your browser, along with any other connected browser looking at that same page.

You have to find the right user that needs to use temp folder. In my computer I follow the above link and find the special folder c:\inetpub, that iis use to execute her web services. I check what users could use these folder and find something like these: computername\iis_isusrs

The main issue comes when you try to add it to all permit on temp folder I was going to properties, security tab, edit button, add user button then i put iis_isusrs

and "check names" button

It doesn´t find anything The reason is the in my case it looks ( windows 2008 r2 iis 7 ) on pdgs.local location You have to go to "Select Users or Groups" form, click on Advanced button, click on Locations button and will see a specific hierarchy

• computername
• Entire Directory
• • pdgs.local

So when you try to add an user, its search name on pdgs.local. You have to select computername and click ok, Click on "Find Now"

Look for IIS_IUSRS on Name(RDN) column, click ok. So we go back to "Select Users or Groups" form with new and right user underline

click ok, allow full control, and click ok again.

That´s all folks, Hope it helps,

Jose from Moralzarzal ( Madrid )

Sean Kearney from the Hey, Scripting Guy! Blog has a solution I found works pretty nicely.

Function Copy-WithProgress
{
    [CmdletBinding()]
    Param
    (
        [Parameter(Mandatory=$true,
            ValueFromPipelineByPropertyName=$true,
            Position=0)]
        $Source,
        [Parameter(Mandatory=$true,
            ValueFromPipelineByPropertyName=$true,
            Position=0)]
        $Destination
    )

    $Source=$Source.tolower()
    $Filelist=Get-Childitem "$Source" –Recurse
    $Total=$Filelist.count
    $Position=0

    foreach ($File in $Filelist)
    {
        $Filename=$File.Fullname.tolower().replace($Source,'')
        $DestinationFile=($Destination+$Filename)
        Write-Progress -Activity "Copying data from '$source' to '$Destination'" -Status "Copying File $Filename" -PercentComplete (($Position/$total)*100)
        Copy-Item $File.FullName -Destination $DestinationFile
        $Position++
    }
}

Then to use it:

Copy-WithProgress -Source $src -Destination $dest

BigDecimal a = new BigDecimal("12345.0789");
a = a.divide(new BigDecimal("1"), 2, BigDecimal.ROUND_HALF_UP);
//Also check other rounding modes
System.out.println("a >> "+a.toPlainString()); //Returns 12345.08

Here's a simplest example from ASP.NET Community, this gave me a clear understanding on the concept....

what difference does this make?

For an example of this, here is a way to put focus on a text box on a page when the page is loaded into the browser—with Visual Basic using the RegisterStartupScript method:

Page.ClientScript.RegisterStartupScript(Me.GetType(), "Testing", _ 
"document.forms[0]['TextBox1'].focus();", True)

This works well because the textbox on the page is generated and placed on the page by the time the browser gets down to the bottom of the page and gets to this little bit of JavaScript.

But, if instead it was written like this (using the RegisterClientScriptBlock method):

Page.ClientScript.RegisterClientScriptBlock(Me.GetType(), "Testing", _
"document.forms[0]['TextBox1'].focus();", True)

Focus will not get to the textbox control and a JavaScript error will be generated on the page

The reason for this is that the browser will encounter the JavaScript before the text box is on the page. Therefore, the JavaScript will not be able to find a TextBox1.

If this is just a one-off exercise, as an easier alternative, you could apply filters to your source data, and then copy and paste the filtered rows into your new worksheet?

Just specify max-width: 100% alone, that should do it.

I had the same problem, I used Public DNS instead of Public IP. It resolved now.

In R, you can try out this way:

X = NULL
X
# NULL
values = letters[1:10]
values
# [1] "a" "b" "c" "d" "e" "f" "g" "h" "i" "j"
X = append(X,values)
X
# [1] "a" "b" "c" "d" "e" "f" "g" "h" "i" "j"
X = append(X,letters[23:26])
X
# [1] "a" "b" "c" "d" "e" "f" "g" "h" "i" "j" "w" "x" "y" "z"

Use a generator together with any, which short-circuits on the first True:

if any(ext in url_string for ext in extensionsToCheck):
    print(url_string)

EDIT: I see this answer has been accepted by OP. Though my solution may be "good enough" solution to his particular problem, and is a good general way to check if any strings in a list are found in another string, keep in mind that this is all that this solution does. It does not care WHERE the string is found e.g. in the ending of the string. If this is important, as is often the case with urls, you should look to the answer of @Wladimir Palant, or you risk getting false positives.

I also got the same error , It resolved by Right click on Service > Properties >Log On > log on as : Local System Account.

They are not really same mutexes, lock_guard<muType> has nearly the same as std::mutex, with a difference that it's lifetime ends at the end of the scope (D-tor called) so a clear definition about these two mutexes :

lock_guard<muType> has a mechanism for owning a mutex for the duration of a scoped block.

And

unique_lock<muType> is a wrapper allowing deferred locking, time-constrained attempts at locking, recursive locking, transfer of lock ownership, and use with condition variables.

Here is an example implemetation :

#include <iostream>
#include <thread>
#include <mutex>
#include <condition_variable>
#include <functional>
#include <chrono>

using namespace std::chrono;

class Product{

   public:

       Product(int data):mdata(data){
       }

       virtual~Product(){
       }

       bool isReady(){
       return flag;
       }

       void showData(){

        std::cout<<mdata<<std::endl;
       }

       void read(){

         std::this_thread::sleep_for(milliseconds(2000));

         std::lock_guard<std::mutex> guard(mmutex);

         flag = true;

         std::cout<<"Data is ready"<<std::endl;

         cvar.notify_one();

       }

       void task(){

       std::unique_lock<std::mutex> lock(mmutex);

       cvar.wait(lock, [&, this]() mutable throw() -> bool{ return this->isReady(); });

       mdata+=1;

       }

   protected:

    std::condition_variable cvar;
    std::mutex mmutex;
    int mdata;
    bool flag = false;

};

int main(){

     int a = 0;
     Product product(a);

     std::thread reading(product.read, &product);
     std::thread setting(product.task, &product);

     reading.join();
     setting.join();


     product.showData();
    return 0;
}

In this example, i used the unique_lock<muType> with condition variable

Using Powershell you can do this:

# Checks for updates and changes in working copy.
# Regex: Excludes unmodified (first 7 columns blank). To exclude more add criteria to negative look ahead.
# -u: svn gets updates
$regex = '^(?!\s{7}).{7}\s+(.+)';
svn status -u | %{ if($_ -match $regex){ $_ } };

This will include property changes. These show in column 2. It will also catch other differences in files that show in columns 3-7.

Sources:

• svn status: http://svnbook.red-bean.com/en/1.8/svn.ref.svn.c.status.html

• Regex to match results of svn status: Using powershell and svn to delete unversioned files

Non-javascript way . . aspx page:

 <form id="form1" runat="server">
<div>
    <asp:CheckBox ID="CheckBox1" runat="server" />
    <asp:CustomValidator ID="CustomValidator1"
        runat="server" ErrorMessage="CustomValidator" ControlToValidate="CheckBox1"></asp:CustomValidator>
</div>
</form>

Code Behind:

Protected Sub CustomValidator1_ServerValidate(ByVal source As Object, ByVal args As System.Web.UI.WebControls.ServerValidateEventArgs) Handles CustomValidator1.ServerValidate
    If Not CheckBox1.Checked Then
        args.IsValid = False
    End If
End Sub

For any actions you might need (business Rules):

If Page.IsValid Then
   'do logic
End If 

Sorry for the VB code . . . you can convert it to C# if that is your pleasure. The company I am working for right now requires VB :(

Look at following demo code.

Here is your XML file for UI,

<?xml version="1.0" encoding="utf-8"?>
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
    android:layout_width="fill_parent"
    android:layout_height="fill_parent"
    android:orientation="vertical" >

    <Button
        android:id="@+id/btnCapture"
        android:layout_width="wrap_content"
        android:layout_height="wrap_content"
        android:text="Camera" />

</LinearLayout>

And here is your Java class file,

public class CameraDemoActivity extends Activity {
    int TAKE_PHOTO_CODE = 0;
    public static int count = 0;

    /** Called when the activity is first created. */
    @Override
    public void onCreate(Bundle savedInstanceState)
    {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.main);

        // Here, we are making a folder named picFolder to store
        // pics taken by the camera using this application.
        final String dir = Environment.getExternalStoragePublicDirectory(Environment.DIRECTORY_PICTURES) + "/picFolder/";
        File newdir = new File(dir);
        newdir.mkdirs();

        Button capture = (Button) findViewById(R.id.btnCapture);
        capture.setOnClickListener(new View.OnClickListener() {
            public void onClick(View v) {

                // Here, the counter will be incremented each time, and the
                // picture taken by camera will be stored as 1.jpg,2.jpg
                // and likewise.
                count++;
                String file = dir+count+".jpg";
                File newfile = new File(file);
                try {
                    newfile.createNewFile();
                }
                catch (IOException e)
                {
                }

                Uri outputFileUri = Uri.fromFile(newfile);

                Intent cameraIntent = new Intent(MediaStore.ACTION_IMAGE_CAPTURE);
                cameraIntent.putExtra(MediaStore.EXTRA_OUTPUT, outputFileUri);

                startActivityForResult(cameraIntent, TAKE_PHOTO_CODE);
            }
        });
    }

    @Override
    protected void onActivityResult(int requestCode, int resultCode, Intent data) {
        super.onActivityResult(requestCode, resultCode, data);

        if (requestCode == TAKE_PHOTO_CODE && resultCode == RESULT_OK) {
            Log.d("CameraDemo", "Pic saved");
        }
    }
}

Note:

Specify the following permissions in your manifest file,

<uses-permission android:name="android.permission.CAMERA"/>

<uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"/>

I had issues getting event.stopPropagation() working. If you do too, try moving it to the top of your click handler function, that was what I needed to do to stop the event from bubbling. Example function:

  toggleFilter(e) {
    e.stopPropagation(); // If moved to the end of the function, will not work
    let target = e.target;
    let i = 10; // Sanity breaker

    while(true) {
      if (--i === 0) { return; }
      if (target.classList.contains("filter")) {
        target.classList.toggle("active");
        break;
      }
      target = target.parentNode;
    }
  }

Use subprocess.Popen:

import subprocess
process = subprocess.Popen(['ls', '-a'], stdout=subprocess.PIPE, stderr=subprocess.PIPE)
out, err = process.communicate()
print(out)

Note that communicate blocks until the process terminates. You could use process.stdout.readline() if you need the output before it terminates. For more information see the documentation.

1. assign

   • assign is a default property attribute
   • assign is a property attribute tells the compiler how to synthesize the property’s setter implementation

2. copy:

   • copy is required when the object is mutable
   • copy returns an object which you must explicitly release (e.g., in dealloc) in non-garbage collected environments
   • you need to release the object when finished with it because you are retaining the copy

3. retain:

   • specifies the new value should be sent “-retain” on assignment and the old value sent “-release”
   • if you write retain it will auto work like strong
   • Methods like “alloc” include an implicit “retain”

The answers above pointed me in the right direction. Here is a generic version of what I got working:

  var script = document.createElement('script');
  script.src = 'http://' + location.hostname + '/module';
  script.addEventListener('load', postLoadFunction);
  document.head.appendChild(script);

  function postLoadFunction() {
     // add module dependent code here
  }      

When magento mode is default it showws such error Change magento mode to developer with

php bin/magento deploy:mode:set developer

then check your error on your browser and resolve that

First, Set :
ALTER TABLE person ALTER COLUMN phone DROP NOT NULL;

If you want to add your menu custom

@Override
public void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setHasOptionsMenu(true);
}

@Override
public void onCreateOptionsMenu(Menu menu, MenuInflater inflater) {
    inflater.inflate(R.menu.menu_custom, menu);
}

Try this.

<span style="padding-right:3px; padding-top: 3px; display:inline-block;">

<img class="manImg" src="images/ico_mandatory.gif"></img>

</span>

Oracle Workshop for WebLogic (formally BEA Workshop) has excellent support for JavaScript and for visually editing HTMLs. It support many servers, not only WebLogic, including Tomcat, JBoss, Resin, Jetty, and WebSphere.

It recently became free, check out my post about it. Given that it was an expensive product not long ago, I guess it's worth checking out.

There is a simple way folks. Use REPLACE function. Here is an example of comma separated string ready to be passed to IN clause.

In PL/SQL:

StatusString :=   REPLACE('Active,Completed', ',', ''',''');

In SQL Plus:

Select  REPLACE('Active,Completed', ',', ''',''') from dual;

If you have a self-signed certificate generated by makecert.exe on a Windows machine, you will get two files: cert.pvk and cert.cer. These can be converted to a pfx using pvk2pfx

pvk2pfx is found in the same location as makecert (e.g. C:\Program Files (x86)\Windows Kits\10\bin\x86 or similar)

pvk2pfx -pvk cert.pvk -spc cert.cer -pfx cert.pfx

This bug cost me 2 days. I checked my Server log, the Preflight Option request/response between browser Chrome/Edge and Server was ok. The main reason is that GET/POST/PUT/DELETE server response for XHTMLRequest must also have the following header:

access-control-allow-origin: origin  

"origin" is in the request header (Browser will add it to request for you). for example:

Origin: http://localhost:4221

you can add response header like the following to accept for all:

access-control-allow-origin: *  

or response header for a specific request like:

access-control-allow-origin: http://localhost:4221 

The message in browsers is not clear to understand: "...The requested resource"

note that: CORS works well for localhost. different port means different Domain. if you get error message, check the CORS config on the server side.

with Apache PDFBox it goes like this:

PDDocument document = PDDocument.load(new File("test.pdf"));
if (!document.isEncrypted()) {
    PDFTextStripper stripper = new PDFTextStripper();
    String text = stripper.getText(document);
    System.out.println("Text:" + text);
}
document.close();

I suggest creating a test app (for dev environment only) on https://developers.facebook.com/apps and set: Website with Facebook Login property to your localhost:[port] settings.
this option will work fine with no need to change hosts.
remember to change the appId back to your production app once you go live.

Edit - in the latest fb version you'll find it under the settings tab.

If the style was declared inline or with JavaScript, you can just get at the style object:

return element.style.display === 'block';

Otherwise, you'll have to get the computed style, and there are browser inconsistencies. IE uses a simple currentStyle object, but everyone else uses a method:

return element.currentStyle ? element.currentStyle.display :
                              getComputedStyle(element, null).display;

The null was required in Firefox version 3 and below.