It usually represents some common service (protocol) that bluetooth device supports.
When creating your own rfcomm server (with listenUsingRfcommWithServiceRecord
), you should specify your own UUID so that the clients connecting to it could identify it;
it is one of the reasons why createRfcommSocketToServiceRecord
requires an UUID parameter.
Otherwise, some common services have the same UUID, just find one you need and use it.
See here
I hope this complete example will help you.
This is the TaxiInfo class which holds information about a taxi ride:
namespace Taxi.Models
{
public class TaxiInfo
{
public String Driver { get; set; }
public Double Fare { get; set; }
public Double Distance { get; set; }
public String StartLocation { get; set; }
public String EndLocation { get; set; }
}
}
We also have a convenience model which holds a List of TaxiInfo(s):
namespace Taxi.Models
{
public class TaxiInfoSet
{
public List<TaxiInfo> TaxiInfoList { get; set; }
public TaxiInfoSet(params TaxiInfo[] TaxiInfos)
{
TaxiInfoList = new List<TaxiInfo>();
foreach(var TaxiInfo in TaxiInfos)
{
TaxiInfoList.Add(TaxiInfo);
}
}
}
}
Now in the home controller we have the default Index action which for this example makes two taxi drivers and adds them to the list contained in a TaxiInfo:
public ActionResult Index()
{
var taxi1 = new TaxiInfo() { Fare = 20.2, Distance = 15, Driver = "Billy", StartLocation = "Perth", EndLocation = "Brisbane" };
var taxi2 = new TaxiInfo() { Fare = 2339.2, Distance = 1500, Driver = "Smith", StartLocation = "Perth", EndLocation = "America" };
return View(new TaxiInfoSet(taxi1,taxi2));
}
The code for the view is as follows:
@model Taxi.Models.TaxiInfoSet
@{
ViewBag.Title = "Index";
}
<h2>Index</h2>
@foreach(var TaxiInfo in Model.TaxiInfoList){
<form>
<h1>Cost: [email protected]</h1>
<h2>Distance: @(TaxiInfo.Distance) km</h2>
<p>
Our diver, @TaxiInfo.Driver will take you from @TaxiInfo.StartLocation to @TaxiInfo.EndLocation
</p>
@Html.ActionLink("Home","Booking",TaxiInfo)
</form>
}
The ActionLink is responsible for the re-directing to the booking action of the Home controller (and passing in the appropriate TaxiInfo object) which is defiend as follows:
public ActionResult Booking(TaxiInfo Taxi)
{
return View(Taxi);
}
This returns a the following view:
@model Taxi.Models.TaxiInfo
@{
ViewBag.Title = "Booking";
}
<h2>Booking For</h2>
<h1>@Model.Driver, going from @Model.StartLocation to @Model.EndLocation (a total of @Model.Distance km) for [email protected]</h1>
A visual tour:
$rootbeer = (float) $InvoicedUnits;
Should do it for you. Check out Type-Juggling. You should also read String conversion to Numbers.
If you already have the int typed as an Integer you can do this:
Integer y = 1;
long x = y.longValue();
You can also use lib-auto
xmlns:app="http://schemas.android.com/apk/lib-auto"
TheNewIdiot's answer successfully explains the problem and the reason why you can't send attributes in request through a redirect. Possible solutions:
Using forwarding. This will enable that request attributes could be passed to the view and you can use them in form of ServletRequest#getAttribute
or by using Expression Language and JSTL. Short example (reusing TheNewIdiot's answer] code).
Controller (your servlet)
request.setAttribute("message", "Hello world");
RequestDispatcher dispatcher = servletContext().getRequestDispatcher(url);
dispatcher.forward(request, response);
View (your JSP)
Using scriptlets:
<%
out.println(request.getAttribute("message"));
%>
This is just for information purposes. Scriptlets usage must be avoided: How to avoid Java code in JSP files?. Below there is the example using EL and JSTL.
<c:out value="${message}" />
If you can't use forwarding (because you don't like it or you don't feel it that way or because you must use a redirect) then an option would be saving a message as a session attribute, then redirect to your view, recover the session attribute in your view and remove it from session. Remember to always have your user session with only relevant data. Code example
Controller
//if request is not from HttpServletRequest, you should do a typecast before
HttpSession session = request.getSession(false);
//save message in session
session.setAttribute("helloWorld", "Hello world");
response.sendRedirect("/content/test.jsp");
View
Again, showing this using scriptlets and then EL + JSTL:
<%
out.println(session.getAttribute("message"));
session.removeAttribute("message");
%>
<c:out value="${sessionScope.message}" />
<c:remove var="message" scope="session" />
I have resolved it , this way
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.Locale;
public class DateParser {
public static void main(String args[]) throws Exception {
DateParser dateParser = new DateParser();
String str = dateParser.getparsedDate("2012-11-17T00:00:00.000-05:00");
System.out.println(str);
}
private String getparsedDate(String date) throws Exception {
DateFormat sdf = new SimpleDateFormat("yyyy-MM-dd'T'HH:mm:ss.SSS", Locale.US);
String s1 = date;
String s2 = null;
Date d;
try {
d = sdf.parse(s1);
s2 = (new SimpleDateFormat("MM/yyyy")).format(d);
} catch (ParseException e) {
e.printStackTrace();
}
return s2;
}
}
Code to display current date in element input or datepicker with ID="mydate"
Don't forget add reference to jquery-ui-*.js
$(document).ready(function () {
var dateNewFormat, onlyDate, today = new Date();
dateNewFormat = today.getFullYear() + '-' + (today.getMonth() + 1);
onlyDate = today.getDate();
if (onlyDate.toString().length == 2) {
dateNewFormat += '-' + onlyDate;
}
else {
dateNewFormat += '-0' + onlyDate;
}
$('#mydate').val(dateNewFormat);
});
More accurately...
while IFS= read -r line ; do
printf "%s\n" "$line"
done < file
The regular expression in the question misses a lot of edge cases. When detecting URLs, it's always better to use a specialized library that handles international domain names, new TLDs like .museum
, parentheses and other punctuation within and at the end of the URL, and many other edge cases. See the Jeff Atwood's blog post The Problem With URLs for an explanation of some of the other issues.
The best summary of URL matching libraries is in Dan Dascalescu's Answer
(as of Feb 2014)
Add a "g" to the end of the regular expression to enable global matching:
/ig;
But that only fixes the problem in the question where the regular expression was only replacing the first match. Do not use that code.
try this
private void cmdLogin_Click(object sender, EventArgs e)
{
if (txtUserName.Text == "admin" || txtPassword.Text == "1")
{
FrmMDI mdi = new FrmMDI();
mdi.Show();
this.Hide();
}
else {
MessageBox.Show("Incorrect Credentials", "Library Management System", MessageBoxButtons.OK, MessageBoxIcon.Exclamation);
}
}
and when you exit the Application you can use
Application.Exit();
Arrays.toString(int []) works for me.
Ensure jre is installed.
cd /path/to/jre/bin/folder
As keytool file is present in the bin folder of jre, give path till bin as in the command above.
Then you can do:
keytool -genkey -alias aliaskeyname -keyalg RSA -keystore C:\mykeystore
The additional option -keystore will help you to specify the path where you want the generated self signed certificate.
clonning below :
git clone https://github.com/zendframework/ZendSkeletonApplication.git
gives error:
Cloning into 'ZendSkeletonApplication'...
fatal: I don't handle protocol 'https'
Modified it to:
git clone https://github.com/zendframework/ZendSkeletonApplication
works perfectly or you can just git clone the url. I am using os windows 10 and gitbash.
Just to extend the answer above you can also index your columns rather than specifying the column names which can also be useful depending on what you're doing. Given that your location is the first field it would look like this:
bar <- foo[foo[ ,1] == "there", ]
This is useful because you can perform operations on your column value, like looping over specific columns (and you can do the same by indexing row numbers too).
This is also useful if you need to perform some operation on more than one column because you can then specify a range of columns:
foo[foo[ ,c(1:N)], ]
Or specific columns, as you would expect.
foo[foo[ ,c(1,5,9)], ]
git show
To complete your own answer, the syntax is indeed
git show object
git show $REV:$FILE
git show somebranch:from/the/root/myfile.txt
git show HEAD^^^:test/test.py
The command takes the usual style of revision, meaning you can use any of the following:
HEAD
+ x number of ^
charactersTip It's important to remember that when using "git show
", always specify a path from the root of the repository, not your current directory position.
(Although Mike Morearty mentions that, at least with git 1.7.5.4, you can specify a relative path by putting "./
" at the beginning of the path. For example:
git show HEAD^^:./test.py
)
git restore
With Git 2.23+ (August 2019), you can also use git restore
which replaces the confusing git checkout
command
git restore -s <SHA1> -- afile
git restore -s somebranch -- afile
That would restore on the working tree only the file as present in the "source" (-s
) commit SHA1 or branch somebranch
.
To restore also the index:
git restore -s <SHA1> -SW -- afile
(-SW
: short for --staged --worktree
)
Before git1.5.x, this was done with some plumbing:
git ls-tree <rev>
show a list of one or more 'blob' objects within a commit
git cat-file blob <file-SHA1>
cat a file as it has been committed within a specific revision (similar to svn
cat).
use git ls-tree
to retrieve the value of a given file-sha1
git cat-file -p $(git-ls-tree $REV $file | cut -d " " -f 3 | cut -f 1)::
git-ls-tree
lists the object ID for $file
in revision $REV
, this is cut out of the output and used as an argument to git-cat-file
, which should really be called git-cat-object
, and simply dumps that object to stdout
.
Note: since Git 2.11 (Q4 2016), you can apply a content filter to the git cat-file
output.
See
commit 3214594,
commit 7bcf341 (09 Sep 2016),
commit 7bcf341 (09 Sep 2016), and
commit b9e62f6,
commit 16dcc29 (24 Aug 2016) by Johannes Schindelin (dscho
).
(Merged by Junio C Hamano -- gitster
-- in commit 7889ed2, 21 Sep 2016)
git config diff.txt.textconv "tr A-Za-z N-ZA-Mn-za-m <"
git cat-file --textconv --batch
Note: "git cat-file --textconv
" started segfaulting recently (2017), which has been corrected in Git 2.15 (Q4 2017)
See commit cc0ea7c (21 Sep 2017) by Jeff King (peff
).
(Merged by Junio C Hamano -- gitster
-- in commit bfbc2fc, 28 Sep 2017)
What does res.render do and what does the html file look like?
res.render()
function compiles your template (please don't use ejs), inserts locals there, and creates html output out of those two things.
Answering Edit 2 part.
// here you set that all templates are located in `/views` directory
app.set('views', __dirname + '/views');
// here you set that you're using `ejs` template engine, and the
// default extension is `ejs`
app.set('view engine', 'ejs');
// here you render `orders` template
response.render("orders", {orders: orders_json});
So, the template path is views/
(first part) + orders
(second part) + .ejs
(third part) === views/orders.ejs
Anyway, express.js documentation is good for what it does. It is API reference, not a "how to use node.js" book.
I had also warnings in Google Dev-Tools and I added only bootstrap.min.css.map file in the same folder, where bootstrap.min.css is.
I have now no warnings more and You can find more Explanation here: https://github.com/twbs/bootstrap#whats-included
I hope, I answered your Question.
use with responsive website (view in mobile or ipad)
jQuery(window).height(); // return height of browser viewport
jQuery(window).width(); // return width of browser viewport
rarely use
jQuery(document).height(); // return height of HTML document
jQuery(document).width(); // return width of HTML document
You can't do it with the layout alone, I've tried. I ended up writing a very simple class to handle it, you can check it out on github. SquareImage.java Its part of a larger project but nothing a little copy and paste can't fix (licensed under Apache 2.0)
Essentially you just need to set the height/width equal to the other dimension (depending on which way you want to scale it)
Note: You can make it square without a custom class using the scaleType
attribute but the view's bounds extend beyond the visible image, which makes it an issue if you are placing other views near it.
I'm guessing @sehe's approach is stronger, but until I understand it better, I find myself leap-frogging off of @MichaelSander's extension. I modified it to match the syntax and return type of the built-in Enumerable.Join() method described here. I appended the "distinct" suffix in respect to @cadrell0's comment under @JeffMercado's solution.
public static class MyExtensions {
public static IEnumerable<TResult> FullJoinDistinct<TLeft, TRight, TKey, TResult> (
this IEnumerable<TLeft> leftItems,
IEnumerable<TRight> rightItems,
Func<TLeft, TKey> leftKeySelector,
Func<TRight, TKey> rightKeySelector,
Func<TLeft, TRight, TResult> resultSelector
) {
var leftJoin =
from left in leftItems
join right in rightItems
on leftKeySelector(left) equals rightKeySelector(right) into temp
from right in temp.DefaultIfEmpty()
select resultSelector(left, right);
var rightJoin =
from right in rightItems
join left in leftItems
on rightKeySelector(right) equals leftKeySelector(left) into temp
from left in temp.DefaultIfEmpty()
select resultSelector(left, right);
return leftJoin.Union(rightJoin);
}
}
In the example, you would use it like this:
var test =
firstNames
.FullJoinDistinct(
lastNames,
f=> f.ID,
j=> j.ID,
(f,j)=> new {
ID = f == null ? j.ID : f.ID,
leftName = f == null ? null : f.Name,
rightName = j == null ? null : j.Name
}
);
In the future, as I learn more, I have a feeling I'll be migrating to @sehe's logic given it's popularity. But even then I'll have to be careful, because I feel it is important to have at least one overload that matches the syntax of the existing ".Join()" method if feasible, for two reasons:
I'm still new with generics, extensions, Func statements, and other features, so feedback is certainly welcome.
EDIT: Didn't take me long to realize there was a problem with my code. I was doing a .Dump() in LINQPad and looking at the return type. It was just IEnumerable, so I tried to match it. But when I actually did a .Where() or .Select() on my extension I got an error: "'System Collections.IEnumerable' does not contain a definition for 'Select' and ...". So in the end I was able to match the input syntax of .Join(), but not the return behavior.
EDIT: Added "TResult" to the return type for the function. Missed that when reading the Microsoft article, and of course it makes sense. With this fix, it now seems the return behavior is in line with my goals after all.
Binding the scroll event after the ul has loaded using ajax has solved the issue. In my findings $(document).on( 'scroll', '#id', function () {...}) is not working and binding the scroll event after the ajax load found working.
$("#ulId").bind('scroll', function() {
console.log('Event worked');
});
You may unbind the event after removing or replacing the ul.
Hope it may help someone.
I presume you only want to reset a single element. Resetting an entire form is simple: call its reset method.
The easiest way to "reset" a select element is to set its selectedIndex
property to the default value. If you know that no option is the default selected option, just set the select elemen'ts selectedIndex property to an appropriate value:
function resetSelectElement(selectElement) {
selecElement.selectedIndex = 0; // first option is selected, or
// -1 for no option selected
}
However, since one option may have the selected attribtue or otherwise be set to the default selected option, you may need to do:
function resetSelectElement(selectElement) {
var options = selectElement.options;
// Look for a default selected option
for (var i=0, iLen=options.length; i<iLen; i++) {
if (options[i].defaultSelected) {
selectElement.selectedIndex = i;
return;
}
}
// If no option is the default, select first or none as appropriate
selectElement.selectedIndex = 0; // or -1 for no option selected
}
And beware of setting attributes rather than properties, they have different effects in different browsers.
Hidden iframes can help
It is likely that you are running the python executable from /usr/bin (Apple version) instead of /usr/loca/bin (Brew version)
You can either
a) check your PATH variable
or
b) run brew doctor
or
c) run which python
to check if it is the case.
If it is the basic JavaScript split function, look at documentation, JavaScript split() Method.
Basically, you just do this:
var array = myString.split(' -- ')
Then your two values are stored in the array - you can get the values like this:
var firstValue = array[0];
var secondValue = array[1];
Because unsatisfied people do complain while satisfied people don't say they are satisfied. My point is that there are far more satisfied maven users than unsatisfied but the later make more noise. This is a common pattern from real life too actually (ISP, phone carrier, transports, etc, etc).
Or if you want all the files from another branch:
git checkout <branch name> -- .
bootstrap-datepicker.js
var defaults = $.fn.datepicker.defaults
autoclose: true
Save and refresh your project and this should do.
if you can, use flexbox:
<ul>
<li>HOME</li>
<li>ABOUT US</li>
<li>SERVICES</li>
<li>PREVIOUS PROJECTS</li>
<li>TESTIMONIALS</li>
<li>NEWS</li>
<li>RESEARCH & DEV</li>
<li>CONTACT</li>
</ul>
ul {
display: flex;
justify-content:space-between;
list-style-type: none;
}
jsfiddle: http://jsfiddle.net/RAaJ8/
Browser support is actually quite good (with prefixes an other nasty stuff): http://caniuse.com/flexbox
What I tend to do is create a C array with the names in the same order and position as the enum values.
eg.
enum colours { red, green, blue };
const char *colour_names[] = { "red", "green", "blue" };
then you can use the array in places where you want a human-readable value, eg
colours mycolour = red;
cout << "the colour is" << colour_names[mycolour];
You could experiment a little with the stringizing operator (see # in your preprocessor reference) that will do what you want, in some circumstances- eg:
#define printword(XX) cout << #XX;
printword(red);
will print "red" to stdout. Unfortunately it won't work for a variable (as you'll get the variable name printed out)
For your problem, the solution might be to attach CDN hosted by google with certain library:
https://developers.google.com/speed/libraries/devguide
Also, you can add this at the bottom of page (just before </body>
):
<script type="text/javascript">
(function() {
var script = document.createElement('script')
script.setAttribute("type", "text/javascript")
script.setAttribute("src", "https://ajax.googleapis.com/ajax/libs/jquery/2.0.3/jquery.min.js")
document.getElementsByTagName("head")[0].appendChild(script)
})();
</script>
However, this is risky in my opinion. You have an asynchronous call for jquery, thus your jquery has to wait until it loads (ie. $(document).ready
won't work in this case). So my answer would be: use a CDN like google suggests; put your javascript on the bottom just before </body>
; and, ignore flags from profilers.
If you are using SVG with JavaScript you need to enable this because it's disabled by default. Use
<script data-search-pseudo-elements ... >
inside your script tag.
You could override the framework CSS (I guess you're using one) and set the size as you want, like this:
.pnx-msg-icon pnx-icon-msg-warning {
width: 24px !important;
height: 24px !important;
}
The "!important" property will make sure your code has priority to the framework's code. Make sure you are overriding the correct property, I don't know how the framework is working, this is just an example of !important usage.
based on other answers and comment of @phk, using fd #3:
(which still allows to use stdin inside the loop)
while IFS= read -r f <&3; do
echo "$f"
done 3< <(find . -iname "*filename*")
Here is an alternative to Uwe Keim's method, which would still maintain the same method call:
var example1 = MyCustomFormat(123.1); // Output: 123.10
var example2 = MyCustomFormat(123.95); // Output: 123.95
var example3 = MyCustomFormat(123); // Output: 123
With MyCustomFormat
being something like:
public static string MyCustomFormat( double myNumber )
{
var str (string.Format("{0:0.00}", myNumber))
return (str.EndsWith(".00") ? str.Substring(0, strLastIndexOf(".00")) : str;
}
supplementing @falsetru's answer : run id in the terminal to get your user_id and group_id
Go the directory/partition where you are facing the challenge. Open terminal, type id then press enter. This will show you your user_id and group_id
then type
chown -R user-id:group-id .
Replace user-id and group-id
. at the end indicates current partition / repository
// chown -R 1001:1001 . (that was my case)
Many time this error is caused when you update a product in your custom module's observer as shown below.
class [NAMESPACE]_[MODULE NAME]_Model_Observer
{
/**
* Flag to stop observer executing more than once
*
* @var static bool
*/
static protected $_singletonFlag = false;
public function saveProductData(Varien_Event_Observer $observer)
{
if (!self::$_singletonFlag) {
self::$_singletonFlag = true;
$product = $observer->getEvent()->getProduct();
//do stuff to the $product object
// $product->save(); // commenting out this line prevents the error
$product->getResource()->save($product);
}
}
Hence whenever you save your product after updating some properties in your module's observer use $product->getResource()->save($product)
instead of $product->save()
<head>
<script type="text/javascript">
<%=YourScript %>
function functionname1(arg1,arg2){content}
</script>
</head>
public string YourScript = "";
public string functionname(arg)
{
if (condition)
{
YourScript = "functionname1(arg1,arg2);";
}
}
Here's the code for server side firebase cloud request from C# / Asp.net.
Please note that your client side should have same topic.
e.g.
FirebaseMessaging.getInstance().subscribeToTopic("news");
public String SendNotificationFromFirebaseCloud()
{
var result = "-1";
var webAddr = "https://fcm.googleapis.com/fcm/send";
var httpWebRequest = (HttpWebRequest)WebRequest.Create(webAddr);
httpWebRequest.ContentType = "application/json";
httpWebRequest.Headers.Add("Authorization:key=" + YOUR_FIREBASE_SERVER_KEY);
httpWebRequest.Method = "POST";
using (var streamWriter = new StreamWriter(httpWebRequest.GetRequestStream()))
{
string json = "{\"to\": \"/topics/news\",\"data\": {\"message\": \"This is a Firebase Cloud Messaging Topic Message!\",}}";
streamWriter.Write(json);
streamWriter.Flush();
}
var httpResponse = (HttpWebResponse)httpWebRequest.GetResponse();
using (var streamReader = new StreamReader(httpResponse.GetResponseStream()))
{
result = streamReader.ReadToEnd();
}
return result;
}
A little bit of decorator treatment (very loosely inspired by the Maybe monad and lifting). You can safely remove Python 3.6 type annotations and use an older message formatting style.
fallible.py
from functools import wraps
from typing import Callable, TypeVar, Optional
import logging
A = TypeVar('A')
def fallible(*exceptions, logger=None) \
-> Callable[[Callable[..., A]], Callable[..., Optional[A]]]:
"""
:param exceptions: a list of exceptions to catch
:param logger: pass a custom logger; None means the default logger,
False disables logging altogether.
"""
def fwrap(f: Callable[..., A]) -> Callable[..., Optional[A]]:
@wraps(f)
def wrapped(*args, **kwargs):
try:
return f(*args, **kwargs)
except exceptions:
message = f'called {f} with *args={args} and **kwargs={kwargs}'
if logger:
logger.exception(message)
if logger is None:
logging.exception(message)
return None
return wrapped
return fwrap
Demo:
In [1] from fallible import fallible
In [2]: @fallible(ArithmeticError)
...: def div(a, b):
...: return a / b
...:
...:
In [3]: div(1, 2)
Out[3]: 0.5
In [4]: res = div(1, 0)
ERROR:root:called <function div at 0x10d3c6ae8> with *args=(1, 0) and **kwargs={}
Traceback (most recent call last):
File "/Users/user/fallible.py", line 17, in wrapped
return f(*args, **kwargs)
File "<ipython-input-17-e056bd886b5c>", line 3, in div
return a / b
In [5]: repr(res)
'None'
You can also modify this solution to return something a bit more meaningful than None
from the except
part (or even make the solution generic, by specifying this return value in fallible
's arguments).
i think this can be as simple
let as assume that you are going to pass multiple parameters to you action as you read up there actions accept only two parameters context
and payload
which is your data you want to pass in action so let take an example
Setting up Action
instead of
actions: {
authenticate: ({ commit }, token, expiration) => commit('authenticate', token, expiration)
}
do
actions: {
authenticate: ({ commit }, {token, expiration}) => commit('authenticate', token, expiration)
}
Calling (dispatching) Action
instead of
this.$store.dispatch({
type: 'authenticate',
token: response.body.access_token,
expiration: response.body.expires_in + Date.now()
})
do
this.$store.dispatch('authenticate',{
token: response.body.access_token,
expiration: response.body.expires_in + Date.now()
})
hope this gonna help
INVISIBLE:
The view has to be drawn and it takes time.
GONE:
The view doesn't have to be drawn.
PDFBox contains tools for text extraction.
iText has more low-level support for text manipulation, but you'd have to write a considerable amount of code to get text extraction.
iText in Action contains a good overview of the limitations of text extraction from PDF, regardless of the library used (Section 18.2: Extracting and editing text), and a convincing explanation why the library does not have text extraction support. In short, it's relatively easy to write a code that will handle simple cases, but it's basically impossible to extract text from PDF in general.
$('').bind('input propertychange', function() {....});
This will work for mouse paste event.
I would say the most elegant way is this:
<div class="toggle"></div>
<div class="content">...</div>
then css:
.toggle{
display:inline-block;
height:48px;
width:48px; background:url("http://icons.iconarchive.com/icons/pixelmixer/basic/48/plus-icon.png");
}
.toggle.expanded{
background:url("http://cdn2.iconfinder.com/data/icons/onebit/PNG/onebit_32.png");
}
and js:
$(document).ready(function(){
var $content = $(".content").hide();
$(".toggle").on("click", function(e){
$(this).toggleClass("expanded");
$content.slideToggle();
});
});
I've always kept this around in a util file. You can use it as a mixin on your own classes too.
class dotdict(dict):
"""dot.notation access to dictionary attributes"""
__getattr__ = dict.get
__setattr__ = dict.__setitem__
__delattr__ = dict.__delitem__
mydict = {'val':'it works'}
nested_dict = {'val':'nested works too'}
mydict = dotdict(mydict)
mydict.val
# 'it works'
mydict.nested = dotdict(nested_dict)
mydict.nested.val
# 'nested works too'
You might look at how pygame handles this to steal some ideas.
Or if you want all PS1 files to work the way VBS files do, you can edit the registry like this:
HKEY_CLASSES_ROOT\Microsoft.PowerShellScript.1\Shell\open\command
Edit the Default value to be something like so...
"C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe" -noLogo -ExecutionPolicy unrestricted -file "%1"
Then you can just double click all your .PS1 files like you would like to. in my humble opinion, be able to out of the box.
I'm going to call this "The Powershell De-castration Hack". LOL enjoy!
Your server's response allows the request to include three specific non-simple headers:
Access-Control-Allow-Headers:origin, x-requested-with, content-type
but your request has a header not allowed by the server's response:
Access-Control-Request-Headers:access-control-allow-origin, content-type
All non-simple headers sent in a CORS request must be explicitly allowed by the Access-Control-Allow-Headers
response header. The unnecessary Access-Control-Allow-Origin
header sent in your request is not allowed by the server's CORS response. This is exactly what the "...not allowed by Access-Control-Allow-Headers
" error message was trying to tell you.
There is no reason for the request to have this header: it does nothing, because Access-Control-Allow-Origin
is a response header, not a request header.
Solution: Remove the setRequestHeader
call that adds a Access-Control-Allow-Origin
header to your request.
If you decide to use printf or sprintf, note that they use the Round half to even method.
foreach my $i ( 0.5, 1.5, 2.5, 3.5 ) {
printf "$i -> %.0f\n", $i;
}
__END__
0.5 -> 0
1.5 -> 2
2.5 -> 2
3.5 -> 4
I have seen Big Theta, and I'm pretty sure I was taught the difference in school. I had to look it up though. This is what Wikipedia says:
Big O is the most commonly used asymptotic notation for comparing functions, although in many cases Big O may be replaced with Big Theta T for asymptotically tighter bounds.
Source: Big O Notation#Related asymptotic notation
I don't know why people use Big-O when talking formally. Maybe it's because most people are more familiar with Big-O than Big-Theta? I had forgotten that Big-Theta even existed until you reminded me. Although now that my memory is refreshed, I may end up using it in conversation. :)
Here's how I solved this issue:
Intent intent = new Intent(Intent.ACTION_VIEW, Uri.parse("vnd.youtube://" + video_id));
startActivity(intent);
Now that I've done some more research, it looks like I only needed 'vnd.youtube:VIDEO_ID' instead of two slashes after the colon (':' vs. '://'):
http://it-ride.blogspot.com/2010/04/android-youtube-intent.html
I tried most of the suggestions here and they didn't really work very well with all of the supposed "direct" methods raising exceptions. I would assume that, with my method, if the YouTube app is NOT installed, the OS has a default fallback position of something other than crashing the app. The app is theoretically only going on devices with the YouTube app on them anyway, so this should be a non-issue.
Take this as a sample code. Replace imageheight and image width with your image dimensions.
<div style="background:yourimage.jpg no-repeat;height:imageheight px;width:imagewidth px">
</div>
In my Windows case the listener would not start, and 'lsnrctl start' would hang forever. The solution was to kill all processes of extproc. I suspect it had something funny to do with my vpn
I have disabled Instant Run feature from the preferences and the issue was solved.
if your table is like this
rowId col1 col2 col3 col4
1 a e 12 2
2 b f 42 5
3 a e 32 2
4 b f 44 5
var grouped = myTable.AsEnumerable().GroupBy(r=> new {pp1 = r.Field<int>("col1"), pp2 = r.Field<int>("col2")});
Faker.js has many utility functions for generating random test data. It is a good option in the context of a test suite:
const Faker = require('faker');
Faker.random.arrayElement(['January', 'February', 'March']);
As commenters have mentioned, you generally should not use this library in production code.
In my view the perfect answer you must required is
var reader = new FileReader();
//Read the contents of Image File.
reader.readAsDataURL(fileUpload.files[0]);
reader.onload = function (e) {
//Initiate the JavaScript Image object.
var image = new Image();
//Set the Base64 string return from FileReader as source.
image.src = e.target.result;
//Validate the File Height and Width.
image.onload = function () {
var height = this.height;
var width = this.width;
if (height > 100 || width > 100) {
alert("Height and Width must not exceed 100px.");
return false;
}
alert("Uploaded image has valid Height and Width.");
return true;
};
};
Jeff Bridgman is correct. All you need is
background: url('pic.jpg')
and this assumes that pic is in the same folder as your html.
Also, Roberto's answer works fine. Tested in Firefox, and IE. Thanks to Raptor for adding formatting that displays full picture fit to screen, and without scrollbars... In a folder f, on the desktop is this html and a picture, pic.jpg, using your userid. Make those substitutions in the below:
<html>
<head>
<style>
body {
background: url('file:///C:/Users/userid/desktop/f/pic.jpg') no-repeat center center fixed;
background-size: cover; /* for IE9+, Safari 4.1+, Chrome 3.0+, Firefox 3.6+ */
-webkit-background-size: cover; /* for Safari 3.0 - 4.0 , Chrome 1.0 - 3.0 */
-moz-background-size: cover; /* optional for Firefox 3.6 */
-o-background-size: cover; /* for Opera 9.5 */
margin: 0; /* to remove the default white margin of body */
padding: 0; /* to remove the default white margin of body */
overflow: hidden;
}
</style>
</head>
<body>
hello
</body>
</html>
Try this CSS:
h1 {
left: 0;
line-height: 200px;
margin-top: -100px;
position: absolute;
text-align: center;
top: 50%;
width: 100%;
}
jsFiddle: http://jsfiddle.net/wprw3/
For printing log use this function, this will create log file in log
folder. Create log folder if its not exists .
logger("Your msg in log ", "Filename you want ", "Data to be log string or array or object");
function logger($logMsg="logger", $filename="logger", $logData=""){
$log = date("j.n.Y h:i:s")." || $logMsg : ".print_r($logData,1).PHP_EOL .
"-------------------------".PHP_EOL;
file_put_contents('./log/'.$filename.date("j.n.Y").'.log', $log, FILE_APPEND);
}
you want to make sure that the user selects anything but "Choose an option" (which is the default one). So that it won't validate if you choose the first option. How can this be done?
You can do this by simple adding attribute required = "required" in the select tag. you can see it in below code
<select id="select" required="required">
<option value="">Choose an option</option>
<option value="option1">Option1</option>
<option value="option2">Option2</option>
<option value="option3">Option3</option>
</select>
It worked fine for me at chorme, firefox and internet explorer. Thanks
Here is another concrete example.It is for a shared library. The shared library's main function is to communicate with a smart card reader. But it can also receive 'configuration information' at runtime over udp. The udp is handled by a thread which MUST be started at init time.
__attribute__((constructor)) static void startUdpReceiveThread (void) {
pthread_create( &tid_udpthread, NULL, __feigh_udp_receive_loop, NULL );
return;
}
The library was written in c.
Since the official standard library doesn't define a constant PI you would have to define it yourself. So the answer to your question "How can I get PI without defining it manually?" is "You don't -- or you rely on some compiler-specific extensions.". If you're not concerned about portability you could check your compiler's manual for this.
C++ allows you to write
const double PI = std::atan(1.0)*4;
but the initialization of this constant is not guaranteed to be static. The G++ compiler however handles those math functions as intrinsics and is able to compute this constant expression at compile-time.
You can always fall back to the good old WinAPI calls, although the amount of work involved is non-trivial. There is no requirement that .NET services be installed via a .NET-aware mechanism.
To install:
OpenSCManager
.CreateService
to register the service.ChangeServiceConfig2
to set a description.CloseServiceHandle
.To uninstall:
OpenSCManager
.OpenService
.DeleteService
on the handle returned by OpenService
.CloseServiceHandle
.The main reason I prefer this over using the ServiceInstaller
/ServiceProcessInstaller
is that you can register the service with your own custom command line arguments. For example, you might register it as "MyApp.exe -service"
, then if the user runs your app without any arguments you could offer them a UI to install/remove the service.
Running Reflector on ServiceInstaller
can fill in the details missing from this brief explanation.
P.S. Clearly this won't have "the same effect as calling: InstallUtil MyService.exe" - in particular, you won't be able to uninstall using InstallUtil. But it seems that perhaps this wasn't an actual stringent requirement for you.
Have a look at json_encode() in PHP. You can get $.ajax to recognize this with the dataType: "json" parameter.
Yeah, this appears to be a common standard. Some coders use self, others use me. It's used as a reference back to the "real" object as opposed to the event.
It's something that took me a little while to really get, it does look odd at first.
I usually do this right at the top of my object (excuse my demo code - it's more conceptual than anything else and isn't a lesson on excellent coding technique):
function MyObject(){
var me = this;
//Events
Click = onClick; //Allows user to override onClick event with their own
//Event Handlers
onClick = function(args){
me.MyProperty = args; //Reference me, referencing this refers to onClick
...
//Do other stuff
}
}
You can do it by using include_once()
function in php. Construct a header part in the name of header.php
and construct the footer part by footer.php
. Finally include all the content in one file.
For example:
header.php
<html>
<title>
<link href="sample.css">
footer.php
</html>
So the final files look like
include_once("header.php")
body content(The body content changes based on the file dynamically)
include_once("footer.php")
The simplest method is to run your program (unmodified) in Cygwin console.
The second simplest method is to run you program (also unmodified) in the ordinary Windows console, pipelining its output through tee.exe (from Cygwin or Git distribution). Tee.exe will recognize the escape codes and call appropriate WinAPI functions.
Something like:
java MyClass | tee.exe log.txt
java MyClass | tee.exe /dev/null
private static DataTable ConvertCSVtoDataTable(string strFilePath)
{
DataTable dt = new DataTable();
using (StreamReader sr = new StreamReader(strFilePath))
{
string[] headers = sr.ReadLine().Split(',');
foreach (string header in headers)
{
dt.Columns.Add(header);
}
while (!sr.EndOfStream)
{
string[] rows = sr.ReadLine().Split(',');
DataRow dr = dt.NewRow();
for (int i = 0; i < headers.Length; i++)
{
dr[i] = rows[i];
}
dt.Rows.Add(dr);
}
}
return dt;
}
private static void WriteToDb(DataTable dt)
{
string connectionString =
"Data Source=localhost;" +
"Initial Catalog=Northwind;" +
"Integrated Security=SSPI;";
using (SqlConnection con = new SqlConnection(connectionString))
{
using (SqlCommand cmd = new SqlCommand("spInsertTest", con))
{
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add("@policyID", SqlDbType.Int).Value = 12;
cmd.Parameters.Add("@statecode", SqlDbType.VarChar).Value = "blagh2";
cmd.Parameters.Add("@county", SqlDbType.VarChar).Value = "blagh3";
con.Open();
cmd.ExecuteNonQuery();
}
}
}
WORKDIR /scripts
COPY bootstrap.sh .
RUN ./bootstrap.sh
You can generally simplify the specification of the parameter BlahActivity::class.java
by defining an inline reified generic function.
inline fun <reified T: Activity> Context.createIntent() =
Intent(this, T::class.java)
Because that lets you do
startActivity(createIntent<Page2>())
Or even simpler
inline fun <reified T: Activity> Activity.startActivity() {
startActivity(createIntent<T>())
}
So it's now
startActivity<Page2>()
here a concatenation solution:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#define BUFFERSIZE 10
int main() {
char *text = calloc(1,1), buffer[BUFFERSIZE];
printf("Enter a message: \n");
while( fgets(buffer, BUFFERSIZE , stdin) ) /* break with ^D or ^Z */
{
text = realloc( text, strlen(text)+1+strlen(buffer) );
if( !text ) ... /* error handling */
strcat( text, buffer ); /* note a '\n' is appended here everytime */
printf("%s\n", buffer);
}
printf("\ntext:\n%s",text);
return 0;
}
This happened to me while trying to copy over the PSPDFKIT demo library into my project. I followed all the instructions in the site + all the suggestions on this page.. for some reason it kept on giving the above error, the problem was that if i grepped the message in the error method.. it only appeared in the binary (obviously I have no access to the source code b/c I have to pay for it).
I noticed this in the instruction page though:
So I went to the guts of that config file and found this:
OTHER_LDFLAGS=$(inherited) -ObjC -fobjc-arc -lz -framework CoreText -framework CoreMedia -framework MediaPlayer -framework AVFoundation -framework ImageIO -framework MediaPlayer -framework MessageUI -framework CoreGraphics -framework Foundation -framework QuartzCore -framework AVFoundation -framework CFNetwork -framework MobileCoreServices -framework SystemConfiguration -weak_framework UIKit
Then I went to the sample project provided by the author of the said library.. and noticed that the previous flags where copied verbatim to the other linker flags in my build settings.. however in my project.. they were not!.. So i simply copied and pasted them into my project's build settings other linker flags and everything worked!
take away point: if you are relying on some .xcconfig file on your setup, double check with a sample code source or something and make sure that it has actually been applied.. it wasn't applied properly in my case
in the spotlight, search for Activity Monitor. You can force fully remove any application from here.
I don't know about performance or elegance of my solution, but it's what I'm using:
if (preg_match('/^[\[\{]\"/', $string)) {
$aJson = json_decode($string, true);
if (!is_null($aJson)) {
... do stuff here ...
}
}
Since all my JSON encoded strings start with {" it suffices to test for this with a RegEx. I'm not at all fluent with RegEx, so there might be a better way to do this. Also: strpos() might be quicker.
Just trying to give in my tuppence worth.
P.S. Just updated the RegEx string to /^[\[\{]\"/
to also find JSON array strings. So it now looks for either [" or {" at the beginning of the string.
Bootstrap 4
The display (hidden/visible) classes are changed in Bootstrap 4. To hide on the xs
viewport use:
d-none d-sm-block
Also see: Missing visible-** and hidden-** in Bootstrap v4
Bootstrap 3 (original answer)
Use the hidden-xs
utility class..
<nav class="col-sm-3 hidden-xs">
<ul class="list-unstyled">
<li>Text 10</li>
<li>Text 11</li>
<li>Text 12</li>
</ul>
</nav>
Use white-space:nowrap
and overflow:hidden
I got the same problem when trying to create a database using Code First(without database approach). The problem is that EF doesn't have enough permissions to create a database for you.
So I worked my way up using the Code First(using an existing database approach).
Steps :
Now in the Context class, create a constructor for it and extend it from base class and pass the name of the connection string as a parameter. Just like,
public class DummyContext : DbContext
{
public DummyContext() : base("name=DefaultConnection")
{
}
}
5.And now run your code and see the tables getting added to the database provided.
I have cuDNN 8.0 and none of the suggestions above worked for me. The desired information was in /usr/include/cudnn_version.h
, so
cat /usr/include/cudnn_version.h | grep CUDNN_MAJOR -A 2
did the trick.
This helped me: Project menu -> Clean... -> clean all projects
This approach just uses css and html. You can actually stack a divs below the video easily. It is cover but not centered while you resize.
HTML:
<html>
<head>
<link rel="stylesheet" type="text/css" href="style.css">
</script>
</head>
<body>
<div id = "contain">
<div id="vid">
<video autoplay>
<source src="http://www.quirksmode.org/html5/videos/big_buck_bunny.mp4" type="video/mp4" />
</video>
</div>
</div>
</body>
</html>
CCS:
/*
filename:style.css
*/
body {
margin:0;
}
#vid video{
position: absolute;
right: 0;
top: 0;
min-width: 100%;
min-height: 100%;
width: auto;
height: auto;
}
#contain {
width:100%;
height:100%;
zoom:1%;/*Without this the video will be stretched and skewed*/
}
Changed my entry to
entry: path.resolve(__dirname, './src/js/index.js'),
and it worked.
The number is held in an int[]
- the maximum size of an array is Integer.MAX_VALUE
. So the maximum BigInteger probably is (2 ^ 32) ^ Integer.MAX_VALUE
.
Admittedly, this is implementation dependent, not part of the specification.
In Java 8, some information was added to the BigInteger javadoc, giving a minimum supported range and the actual limit of the current implementation:
BigInteger
must support values in the range-2
Integer.MAX_VALUE
(exclusive) to+2
Integer.MAX_VALUE
(exclusive) and may support values outside of that range.Implementation note:
BigInteger
constructors and operations throwArithmeticException
when the result is out of the supported range of-2
Integer.MAX_VALUE
(exclusive) to+2
Integer.MAX_VALUE
(exclusive).
If you are using foreignkey then you have to use "on_delete=models.CASCADE" as it will eliminate the complexity developed after deleting the original element from the parent table. As simple as that.
categorie = models.ForeignKey('Categorie', on_delete=models.CASCADE)
To only find the first locations, use lapply()
with min()
:
my_string <- c("test1", "test1test1", "test1test1test1")
unlist(lapply(gregexpr(pattern = '1', my_string), min))
#> [1] 5 5 5
# or the readable tidyverse form
my_string %>%
gregexpr(pattern = '1') %>%
lapply(min) %>%
unlist()
#> [1] 5 5 5
To only find the last locations, use lapply()
with max()
:
unlist(lapply(gregexpr(pattern = '1', my_string), max))
#> [1] 5 10 15
# or the readable tidyverse form
my_string %>%
gregexpr(pattern = '1') %>%
lapply(max) %>%
unlist()
#> [1] 5 10 15
You can use path.parse(path), for example
const path = require('path');
const { ext } = path.parse('/home/user/dir/file.txt');
Here is some update for supporting iOS 7. It has Dynamic Font Size
now.
For any and all apps that support “Dynamic Type,” users can select a font size in iOS 7 that works system wide, simply by visiting the "General" section under "Settings" and selecting "Font Size."
UIFont *dynamicFont = [UIFont preferredFontForTextStyle:UIFontTextStyleBody];
And constants list, detailed explanation is here
NSString *const UIFontTextStyleHeadline;
NSString *const UIFontTextStyleSubheadline;
NSString *const UIFontTextStyleBody;
NSString *const UIFontTextStyleFootnote;
NSString *const UIFontTextStyleCaption1;
NSString *const UIFontTextStyleCaption2;
Thanks to the answers below combined I've got it working.
python setup.py install
had to point cmd towards the correct folder. I did this by pushd C:\Users\absolutefilepathtotarunpackedfolder
python setup.py install
Thanks Tales Padua & Hugo Honorem
If the BorderLayout option provided by our friends doesnot work, try adding ComponentListerner to the JFrame and implement the componentResized(event) method. When the JFrame object will be resized, this method will be called. So if you write the the code to set the size of the JPanel in this method, you will achieve the intended result.
Ya, I know this 'solution' is not good but use it as a safety net. ;)
That doesn't work because distToPoint
is inside your class, so you need to prefix it with the classname if you want to refer to it, like this: classname.distToPoint(self, p)
. You shouldn't do it like that, though. A better way to do it is to refer to the method directly through the class instance (which is the first argument of a class method), like so: self.distToPoint(p)
.
You can use plain javascript - Array.prototype.filter()
$scope.items = $scope.items.filter(function(item) {
return item.name !== 'ted';
});
Select mymethod()
and press ctrl+alt+h.
To see some detailed Information about any method you can use this by selecting that particular Object or method and right click. you can see the "OpenCallHierarchy" (Ctrl+Alt+H). Like that many tools are there to make your work Easier like "Quick Outline" (Ctrl+O) to view the Datatypes and methods declared in a particular .java file.
To know more about this, refer this eclipse Reference
In order for the client to be able to read cookies from cross-origin requests, you need to have:
All responses from the server need to have the following in their header:
Access-Control-Allow-Credentials: true
The client needs to send all requests with withCredentials: true
option
In my implementation with Angular 7 and Spring Boot, I achieved that with the following:
Server-side:
@CrossOrigin(origins = "http://my-cross-origin-url.com", allowCredentials = "true")
@Controller
@RequestMapping(path = "/something")
public class SomethingController {
...
}
The origins = "http://my-cross-origin-url.com"
part will add Access-Control-Allow-Origin: http://my-cross-origin-url.com
to every server's response header
The allowCredentials = "true"
part will add Access-Control-Allow-Credentials: true
to every server's response header, which is what we need in order for the client to read the cookies
Client-side:
import { HttpInterceptor, HttpXsrfTokenExtractor, HttpRequest, HttpHandler, HttpEvent } from "@angular/common/http";
import { Injectable } from "@angular/core";
import { Observable } from 'rxjs';
@Injectable()
export class CustomHttpInterceptor implements HttpInterceptor {
constructor(private tokenExtractor: HttpXsrfTokenExtractor) {
}
intercept(req: HttpRequest<any>, next: HttpHandler): Observable<HttpEvent<any>> {
// send request with credential options in order to be able to read cross-origin cookies
req = req.clone({ withCredentials: true });
// return XSRF-TOKEN in each request's header (anti-CSRF security)
const headerName = 'X-XSRF-TOKEN';
let token = this.tokenExtractor.getToken() as string;
if (token !== null && !req.headers.has(headerName)) {
req = req.clone({ headers: req.headers.set(headerName, token) });
}
return next.handle(req);
}
}
With this class you actually inject additional stuff to all your request.
The first part req = req.clone({ withCredentials: true });
, is what you need in order to send each request with withCredentials: true
option. This practically means that an OPTION request will be send first, so that you get your cookies and the authorization token among them, before sending the actual POST/PUT/DELETE requests, which need this token attached to them (in the header), in order for the server to verify and execute the request.
The second part is the one that specifically handles an anti-CSRF token for all requests. Reads it from the cookie when needed and writes it in the header of every request.
The desired result is something like this:
write a cloud function to and update the node count.
// below function to get the given node count.
const functions = require('firebase-functions');
const admin = require('firebase-admin');
admin.initializeApp(functions.config().firebase);
exports.userscount = functions.database.ref('/users/')
.onWrite(event => {
console.log('users number : ', event.data.numChildren());
return event.data.ref.parent.child('count/users').set(event.data.numChildren());
});
Refer :https://firebase.google.com/docs/functions/database-events
root--|
|-users ( this node contains all users list)
|
|-count
|-userscount :
(this node added dynamically by cloud function with the user count)
No, == between Integer, Long etc will check for reference equality - i.e.
Integer x = ...;
Integer y = ...;
System.out.println(x == y);
this will check whether x
and y
refer to the same object rather than equal objects.
So
Integer x = new Integer(10);
Integer y = new Integer(10);
System.out.println(x == y);
is guaranteed to print false
. Interning of "small" autoboxed values can lead to tricky results:
Integer x = 10;
Integer y = 10;
System.out.println(x == y);
This will print true
, due to the rules of boxing (JLS section 5.1.7). It's still reference equality being used, but the references genuinely are equal.
If the value p being boxed is an integer literal of type int between -128 and 127 inclusive (§3.10.1), or the boolean literal true or false (§3.10.3), or a character literal between '\u0000' and '\u007f' inclusive (§3.10.4), then let a and b be the results of any two boxing conversions of p. It is always the case that a == b.
Personally I'd use:
if (x.intValue() == y.intValue())
or
if (x.equals(y))
As you say, for any comparison between a wrapper type (Integer
, Long
etc) and a numeric type (int
, long
etc) the wrapper type value is unboxed and the test is applied to the primitive values involved.
This occurs as part of binary numeric promotion (JLS section 5.6.2). Look at each individual operator's documentation to see whether it's applied. For example, from the docs for ==
and !=
(JLS 15.21.1):
If the operands of an equality operator are both of numeric type, or one is of numeric type and the other is convertible (§5.1.8) to numeric type, binary numeric promotion is performed on the operands (§5.6.2).
and for <
, <=
, >
and >=
(JLS 15.20.1)
The type of each of the operands of a numerical comparison operator must be a type that is convertible (§5.1.8) to a primitive numeric type, or a compile-time error occurs. Binary numeric promotion is performed on the operands (§5.6.2). If the promoted type of the operands is int or long, then signed integer comparison is performed; if this promoted type is float or double, then floating-point comparison is performed.
Note how none of this is considered as part of the situation where neither type is a numeric type.
The problem with using <Redirect from="/" to="searchDashboard" />
is if you have a different URL, say /indexDashboard
and the user hits refresh or gets a URL sent to them, the user will be redirected to /searchDashboard
anyway.
If you wan't users to be able to refresh the site or send URLs use this:
<Route exact path="/" render={() => (
<Redirect to="/searchDashboard"/>
)}/>
Use this if searchDashboard
is behind login:
<Route exact path="/" render={() => (
loggedIn ? (
<Redirect to="/searchDashboard"/>
) : (
<Redirect to="/login"/>
)
)}/>
#splits string according to delimeters
'''
Let's make a function that can split a string
into list according the given delimeters.
example data: cat;dog:greff,snake/
example delimeters: ,;- /|:
'''
def string_to_splitted_array(data,delimeters):
#result list
res = []
# we will add chars into sub_str until
# reach a delimeter
sub_str = ''
for c in data: #iterate over data char by char
# if we reached a delimeter, we store the result
if c in delimeters:
# avoid empty strings
if len(sub_str)>0:
# looks like a valid string.
res.append(sub_str)
# reset sub_str to start over
sub_str = ''
else:
# c is not a deilmeter. then it is
# part of the string.
sub_str += c
# there may not be delimeter at end of data.
# if sub_str is not empty, we should att it to list.
if len(sub_str)>0:
res.append(sub_str)
# result is in res
return res
# test the function.
delimeters = ',;- /|:'
# read the csv data from console.
csv_string = input('csv string:')
#lets check if working.
splitted_array = string_to_splitted_array(csv_string,delimeters)
print(splitted_array)
Your calls are made recursively which pushes functions on to the stack infinitely that causes max call stack exceeded error due to recursive behavior. Instead try using setTimeout which is a callback.
Also based on your markup your selector is wrong. it should be #advisersDiv
function fadeIn() {
$('#pulseDiv').find('div#advisersDiv').delay(400).addClass("pulse");
setTimeout(fadeOut,1); //<-- Provide any delay here
};
function fadeOut() {
$('#pulseDiv').find('div#advisersDiv').delay(400).removeClass("pulse");
setTimeout(fadeIn,1);//<-- Provide any delay here
};
fadeIn();
My solution is similar to the SAMBA one except using sshfs. Mount my remote server with sshfs, open my makefile project on the remote machine. Go from there.
It seems I can run a GUI frontend to mercurial this way as well.
Building my remote code is as simple as: ssh address remote_make_command
I am looking for a decent way to debug though. Possibly via gdbserver?
open up your console and hit the URL inside. it'll take you to the API page and then in the page accept the SSL certificate, go back to your app page and reload. remember that SSL certificates should have been issued for your Dev environment before.
This is all you need to read.
https://developer.mozilla.org/en-US/docs/Web/API/FileReader/readAsBinaryString
var height = 200;
var width = 200;
canvas.width = width;
canvas.height = height;
var ctx = canvas.getContext('2d');
ctx.strokeStyle = '#090';
ctx.beginPath();
ctx.arc(width/2, height/2, width/2 - width/10, 0, Math.PI*2);
ctx.stroke();
canvas.toBlob(function (blob) {
//consider blob is your file object
var reader = new FileReader();
reader.onload = function () {
console.log(reader.result);
}
reader.readAsBinaryString(blob);
});
Specify a 'display-image' and 'full-size-image' as described here: http://www.informit.com/articles/article.aspx?p=1829415&seqNum=16
iOS8 requires these images
I found that none of the methods here worked if the hyperlink did not include http:// as they linked to local locations.
I also wanted to fool-proof the script as the users would not be able to maintain it themselves and I would not be available.
It will only run on cells in a selected range if they contain a dot and no spaces. It will only run for up to 10,000 cells.
Sub HyperAdd()
Dim CellsWithSpaces As String
'Converts each text hyperlink selected into a working hyperlink
Application.ScreenUpdating = False
Dim NotPresent As Integer
NotPresent = 0
For Each xCell In Selection
xCell.Formula = Trim(xCell.Formula)
If xCell.Formula = "" Or InStr(xCell.Formula, ".") = NotPresent Then
'Do nothing if the cell is blank or contains no dots
Else
If InStr(xCell.Formula, " ") <> 0 Then
CellsWithSpaces = CellsWithSpaces & ", " & Replace(xCell.Address, "$", "")
GoTo Nextxcell
End If
If InStr(xCell.Formula, "http") <> 0 Then
Hyperstring = Trim(xCell.Formula)
Else
Hyperstring = "http://" & Trim(xCell.Formula)
End If
ActiveSheet.Hyperlinks.Add Anchor:=xCell, Address:=Hyperstring
End If
i = i + 1
If i = 10000 Then Exit Sub
Nextxcell:
Next xCell
If Not CellsWithSpaces = "" Then
MsgBox ("Please remove spaces from the following cells:" & CellsWithSpaces)
End If
Application.ScreenUpdating = True
End Sub
The format you need is:
'2007-01-01 10:00:00'
i.e. yyyy-MM-dd HH:mm:ss
If possible, however, use a parameterised query as this frees you from worrying about the formatting details.
I often find it useful to write a function to handle error messages so the code is cleaner overall.
# Usage: die [exit_code] [error message]
die() {
local code=$? now=$(date +%T.%N)
if [ "$1" -ge 0 ] 2>/dev/null; then # assume $1 is an error code if numeric
code="$1"
shift
fi
echo "$0: ERROR at ${now%???}${1:+: $*}" >&2
exit $code
}
This takes the error code from the previous command and uses it as the default error code when exiting the whole script. It also notes the time, with microseconds where supported (GNU date's %N
is nanoseconds, which we truncate to microseconds later).
If the first option is zero or a positive integer, it becomes the exit code and we remove it from the list of options. We then report the message to standard error, with the name of the script, the word "ERROR", and the time (we use parameter expansion to truncate nanoseconds to microseconds, or for non-GNU times, to truncate e.g. 12:34:56.%N
to 12:34:56
). A colon and space are added after the word ERROR, but only when there is a provided error message. Finally, we exit the script using the previously determined exit code, triggering any traps as normal.
Some examples (assume the code lives in script.sh
):
if [ condition ]; then die 123 "condition not met"; fi
# exit code 123, message "script.sh: ERROR at 14:58:01.234564: condition not met"
$command |grep -q condition || die 1 "'$command' lacked 'condition'"
# exit code 1, "script.sh: ERROR at 14:58:55.825626: 'foo' lacked 'condition'"
$command || die
# exit code comes from command's, message "script.sh: ERROR at 14:59:15.575089"
$last = array_slice($array, -1, 1, true);
See http://php.net/array_slice for details on what the arguments mean.
P.S. Unlike the other answers, this one actually does what you want. :-)
Update on data.table methods for joining datasets. See below examples for each type of join. There are two methods, one from [.data.table
when passing second data.table as the first argument to subset, another way is to use merge
function which dispatches to fast data.table method.
df1 = data.frame(CustomerId = c(1:6), Product = c(rep("Toaster", 3), rep("Radio", 3)))
df2 = data.frame(CustomerId = c(2L, 4L, 7L), State = c(rep("Alabama", 2), rep("Ohio", 1))) # one value changed to show full outer join
library(data.table)
dt1 = as.data.table(df1)
dt2 = as.data.table(df2)
setkey(dt1, CustomerId)
setkey(dt2, CustomerId)
# right outer join keyed data.tables
dt1[dt2]
setkey(dt1, NULL)
setkey(dt2, NULL)
# right outer join unkeyed data.tables - use `on` argument
dt1[dt2, on = "CustomerId"]
# left outer join - swap dt1 with dt2
dt2[dt1, on = "CustomerId"]
# inner join - use `nomatch` argument
dt1[dt2, nomatch=NULL, on = "CustomerId"]
# anti join - use `!` operator
dt1[!dt2, on = "CustomerId"]
# inner join - using merge method
merge(dt1, dt2, by = "CustomerId")
# full outer join
merge(dt1, dt2, by = "CustomerId", all = TRUE)
# see ?merge.data.table arguments for other cases
Below benchmark tests base R, sqldf, dplyr and data.table.
Benchmark tests unkeyed/unindexed datasets.
Benchmark is performed on 50M-1 rows datasets, there are 50M-2 common values on join column so each scenario (inner, left, right, full) can be tested and join is still not trivial to perform. It is type of join which well stress join algorithms. Timings are as of sqldf:0.4.11
, dplyr:0.7.8
, data.table:1.12.0
.
# inner
Unit: seconds
expr min lq mean median uq max neval
base 111.66266 111.66266 111.66266 111.66266 111.66266 111.66266 1
sqldf 624.88388 624.88388 624.88388 624.88388 624.88388 624.88388 1
dplyr 51.91233 51.91233 51.91233 51.91233 51.91233 51.91233 1
DT 10.40552 10.40552 10.40552 10.40552 10.40552 10.40552 1
# left
Unit: seconds
expr min lq mean median uq max
base 142.782030 142.782030 142.782030 142.782030 142.782030 142.782030
sqldf 613.917109 613.917109 613.917109 613.917109 613.917109 613.917109
dplyr 49.711912 49.711912 49.711912 49.711912 49.711912 49.711912
DT 9.674348 9.674348 9.674348 9.674348 9.674348 9.674348
# right
Unit: seconds
expr min lq mean median uq max
base 122.366301 122.366301 122.366301 122.366301 122.366301 122.366301
sqldf 611.119157 611.119157 611.119157 611.119157 611.119157 611.119157
dplyr 50.384841 50.384841 50.384841 50.384841 50.384841 50.384841
DT 9.899145 9.899145 9.899145 9.899145 9.899145 9.899145
# full
Unit: seconds
expr min lq mean median uq max neval
base 141.79464 141.79464 141.79464 141.79464 141.79464 141.79464 1
dplyr 94.66436 94.66436 94.66436 94.66436 94.66436 94.66436 1
DT 21.62573 21.62573 21.62573 21.62573 21.62573 21.62573 1
Be aware there are other types of joins you can perform using data.table
:
- update on join - if you want to lookup values from another table to your main table
- aggregate on join - if you want to aggregate on key you are joining you do not have to materialize all join results
- overlapping join - if you want to merge by ranges
- rolling join - if you want merge to be able to match to values from preceeding/following rows by rolling them forward or backward
- non-equi join - if your join condition is non-equal
Code to reproduce:
library(microbenchmark)
library(sqldf)
library(dplyr)
library(data.table)
sapply(c("sqldf","dplyr","data.table"), packageVersion, simplify=FALSE)
n = 5e7
set.seed(108)
df1 = data.frame(x=sample(n,n-1L), y1=rnorm(n-1L))
df2 = data.frame(x=sample(n,n-1L), y2=rnorm(n-1L))
dt1 = as.data.table(df1)
dt2 = as.data.table(df2)
mb = list()
# inner join
microbenchmark(times = 1L,
base = merge(df1, df2, by = "x"),
sqldf = sqldf("SELECT * FROM df1 INNER JOIN df2 ON df1.x = df2.x"),
dplyr = inner_join(df1, df2, by = "x"),
DT = dt1[dt2, nomatch=NULL, on = "x"]) -> mb$inner
# left outer join
microbenchmark(times = 1L,
base = merge(df1, df2, by = "x", all.x = TRUE),
sqldf = sqldf("SELECT * FROM df1 LEFT OUTER JOIN df2 ON df1.x = df2.x"),
dplyr = left_join(df1, df2, by = c("x"="x")),
DT = dt2[dt1, on = "x"]) -> mb$left
# right outer join
microbenchmark(times = 1L,
base = merge(df1, df2, by = "x", all.y = TRUE),
sqldf = sqldf("SELECT * FROM df2 LEFT OUTER JOIN df1 ON df2.x = df1.x"),
dplyr = right_join(df1, df2, by = "x"),
DT = dt1[dt2, on = "x"]) -> mb$right
# full outer join
microbenchmark(times = 1L,
base = merge(df1, df2, by = "x", all = TRUE),
dplyr = full_join(df1, df2, by = "x"),
DT = merge(dt1, dt2, by = "x", all = TRUE)) -> mb$full
lapply(mb, print) -> nul
If you are generating new *.json or modifying existing josn file the use "indent" parameter for pretty view json format.
import json
responseData = json.loads(output)
with open('twitterData.json','w') as twitterDataFile:
json.dump(responseData, twitterDataFile, indent=4)
"How to find all a
which are children of <li class=test>
but not any others?"
Given the HTML below (I added another <a>
to show te difference between select
and select_one
):
<div>
<li class="test">
<a>link1</a>
<ul>
<li>
<a>link2</a>
</li>
</ul>
<a>link3</a>
</li>
</div>
The solution is to use child combinator (>
) that is placed between two CSS selectors:
>>> soup.select('li.test > a')
[<a>link1</a>, <a>link3</a>]
In case you want to find only the first child:
>>> soup.select_one('li.test > a')
<a>link1</a>
If your process gives a huge stdout and no stderr, communicate()
might be the wrong way to go due to memory restrictions.
Instead,
process = subprocess.Popen(cmd, shell=True,
stdout=subprocess.PIPE,
stderr=subprocess.PIPE)
# wait for the process to terminate
for line in process.stdout: do_something(line)
errcode = process.returncode
might be the way to go.
process.stdout
is a file-like object which you can treat as any other such object, mainly:
read()
from itreadline()
from it andThe latter is what I do above in order to get its contents line by line.
file_name=test.log
# set first K lines:
K=1000
# line count (N):
N=$(wc -l < $file_name)
# length of the bottom file:
L=$(( $N - $K ))
# create the top of file:
head -n $K $file_name > top_$file_name
# create bottom of file:
tail -n $L $file_name > bottom_$file_name
Also, on second thought, split will work in your case, since the first split is larger than the second. Split puts the balance of the input into the last split, so
split -l 300000 file_name
will output xaa
with 300k lines and xab
with 100k lines, for an input with 400k lines.
Adding on to @[RichardTheKiwi]'s answer.
Whenever I search for a list of tables, in general I want to select from all of them or delete them. Below is a script that generates those scripts for you.
The generated select script also adds a tableName column so you know what table you're looking at:
select 'select ''' + name + ''' as TableName, * from ' + name as SelectTable,
'delete from ' + name as DeleteTable
from sys.tables
where name like '%xxxx%'
and is_ms_shipped = 0;
There is no way. You need a default constructor for array members and it will be called, afterwards, you can do any initialization you want in the constructor.
var elem = document.getElementById("myvideo");
function openFullscreen() {
if (elem.requestFullscreen) {
elem.requestFullscreen();
} else if (elem.mozRequestFullScreen) { /* Firefox */
elem.mozRequestFullScreen();
} else if (elem.webkitRequestFullscreen) { /* Chrome, Safari & Opera */
elem.webkitRequestFullscreen();
} else if (elem.msRequestFullscreen) { /* IE/Edge */
elem.msRequestFullscreen();
}
}
//Internet Explorer 10 and earlier does not support the msRequestFullscreen() method.
Unless you have some kind of really weird problem, keep it. The number of IPv6 sites is very small, but there are some and it will let you get to them even if you're at an IPv4 only location.
If it is causing you a problem, it's best to fix it. I've seen a number of people recommending removing it to solve problems. However, they're not actually solving the root cause of the issue. In all the cases I've seen, removing Teredo just happens to cause a side-effect that fixes their problem... :)
This helped me a lot -
$new_date = date_format(date_create($old_date), 'Y-m-d');
Here,
date_create()
provides you a date object for a given date &date_format()
will set it in a given format.
for example,
<?php
$date = date_create("13-02-2013"); // DateTime Object ( [date] => 2013-02-13 00:00:00.000000 [timezone_type] => 3 [timezone] => America/New_York )
echo date_format($date,"Y-m-d"); // 2013-02-13
?>
I use this class and have no problem.
public class WCFs
{
// https://192.168.30.8/myservice.svc?wsdl
private static final String NAMESPACE = "http://tempuri.org/";
private static final String URL = "192.168.30.8";
private static final String SERVICE = "/myservice.svc?wsdl";
private static String SOAP_ACTION = "http://tempuri.org/iWCFserviceMe/";
public static Thread myMethod(Runnable rp)
{
String METHOD_NAME = "myMethod";
SoapObject request = new SoapObject(NAMESPACE, METHOD_NAME);
request.addProperty("Message", "Https WCF Running...");
return _call(rp,METHOD_NAME, request);
}
protected static HandlerThread _call(final RunProcess rp,final String METHOD_NAME, SoapObject soapReq)
{
final SoapSerializationEnvelope envelope = new SoapSerializationEnvelope(SoapEnvelope.VER11);
int TimeOut = 5*1000;
envelope.dotNet = true;
envelope.bodyOut = soapReq;
envelope.setOutputSoapObject(soapReq);
final HttpsTransportSE httpTransport_net = new HttpsTransportSE(URL, 443, SERVICE, TimeOut);
try
{
HttpsURLConnection.setDefaultHostnameVerifier(new HostnameVerifier() // use this section if crt file is handmake
{
@Override
public boolean verify(String hostname, SSLSession session)
{
return true;
}
});
KeyStore k = getFromRaw(R.raw.key, "PKCS12", "password");
((HttpsServiceConnectionSE) httpTransport_net.getServiceConnection()).setSSLSocketFactory(getSSLSocketFactory(k, "SSL"));
}
catch(Exception e){}
HandlerThread thread = new HandlerThread("wcfTd"+ Generator.getRandomNumber())
{
@Override
public void run()
{
Handler h = new Handler(Looper.getMainLooper());
Object response = null;
for(int i=0; i<4; i++)
{
response = send(envelope, httpTransport_net , METHOD_NAME, null);
try
{if(Thread.currentThread().isInterrupted()) return;}catch(Exception e){}
if(response != null)
break;
ThreadHelper.threadSleep(250);
}
if(response != null)
{
if(rp != null)
{
rp.setArguments(response.toString());
h.post(rp);
}
}
else
{
if(Thread.currentThread().isInterrupted())
return;
if(rp != null)
{
rp.setExceptionState(true);
h.post(rp);
}
}
ThreadHelper.stopThread(this);
}
};
thread.start();
return thread;
}
private static Object send(SoapSerializationEnvelope envelope, HttpTransportSE androidHttpTransport, String METHOD_NAME, List<HeaderProperty> headerList)
{
try
{
if(headerList != null)
androidHttpTransport.call(SOAP_ACTION + METHOD_NAME, envelope, headerList);
else
androidHttpTransport.call(SOAP_ACTION + METHOD_NAME, envelope);
Object res = envelope.getResponse();
if(res instanceof SoapPrimitive)
return (SoapPrimitive) envelope.getResponse();
else if(res instanceof SoapObject)
return ((SoapObject) envelope.getResponse());
}
catch(Exception e)
{}
return null;
}
public static KeyStore getFromRaw(@RawRes int id, String algorithm, String filePassword)
{
try
{
InputStream inputStream = ResourceMaster.openRaw(id);
KeyStore keystore = KeyStore.getInstance(algorithm);
keystore.load(inputStream, filePassword.toCharArray());
inputStream.close();
return keystore;
}
catch(Exception e)
{}
return null;
}
public static SSLSocketFactory getSSLSocketFactory(KeyStore trustKey, String SSLAlgorithm)
{
try
{
TrustManagerFactory tmf = TrustManagerFactory.getInstance(TrustManagerFactory.getDefaultAlgorithm());
tmf.init(trustKey);
SSLContext context = SSLContext.getInstance(SSLAlgorithm);//"SSL" "TLS"
context.init(null, tmf.getTrustManagers(), null);
return context.getSocketFactory();
}
catch(Exception e){}
return null;
}
}
In adition to the selected answer, if you're using .NET35 or .NET35 CE, you have to specify the index of the first byte to decode, and the number of bytes to decode:
string result = System.Text.Encoding.UTF8.GetString(byteArray,0,byteArray.Length);
you can save them into a $_SESSION variable and then when the user calls that page again populate all the inputs with their respective session variables.
Depending on your syntax rules for the current buffer, something like this could work:
:syn match WhiteSpace / / containedin=ALL conceal cchar=Æ
:setl conceallevel=2 concealcursor=nv
This needs a vim 7.3 with +conceal feature
Update 10/24/2014 To expand a little bit on that. It is of course possible to define some highlighting for the conealed characters.
You can configure, how the concealed chars look. For highlighting, you would have to at least once configure the 'Conceal' highlighting group (See the help at :h hl-Conceal
This can be done in your colorscheme and then you do not need to reconfigure it again. But this affects all concealed chars (e.g. if your syntax script conceals some more items, they will be displayed as your white space chars). That could look like this:
:hi Conceal ctermfg=7 ctermbg=NONE guifg=LightGrey guibg=NONE
There seems to be a particularity that Vim will not highlight spaces, if the syntax script uses the skipwhite
keyword. There will be no way around (perhaps this will be fixed, I posted a patch)
list
mode. The latest one at the time of writing seems to be this one. (This means, you need to built your own Vim to use this).conceallevel
and concealcursor
are window local options. That means they can be different in different windows (and will possibly be also set by filetype plugins or other plugin scripts).BufWinEnter
or possibly also a Syntax
or even FileType
autocommand. (I have not tested which one actually works).The last two items means, you would have to setup some autocommands that reset the syntax rules and the correesponding options. For the first one, one might want to setup the highlighting using a ColorScheme
autocommand (so that the concealed chars always look the same, independent of what a color scheme actually sets up). For a complete solution, look into romainl answer, that should give you a start. If you setup a function, you can easily setup a toggle command to switch displaying special Highlighting on or off.
Update 10/26/2014 I made a plugin out of this question.
Update 04/22/2015 A patch has been included in Vim that makes this possible using the list
option. Simply set set list listchars+=space:?
This works as of Vim 7.4.711
Check out the Programmatically Displaying the Settings Page
startActivity(context, new Intent(Settings.ACTION_SETTINGS), /*options:*/ null);
In general, you use the predefined constant Settings.ACTION__SETTINGS
. The full list can be found here
with this method you can get specific range of string.you need to pass start index and after that total number of characters you want.
extension String{
func substring(fromIndex : Int,count : Int) -> String{
let startIndex = self.index(self.startIndex, offsetBy: fromIndex)
let endIndex = self.index(self.startIndex, offsetBy: fromIndex + count)
let range = startIndex..<endIndex
return String(self[range])
}
}
If you are using LINQ, you can use the following query:
var duplicateItems = from x in list
group x by x into grouped
where grouped.Count() > 1
select grouped.Key;
or, if you prefer it without the syntactic sugar:
var duplicateItems = list.GroupBy(x => x).Where(x => x.Count() > 1).Select(x => x.Key);
This groups all elements that are the same, and then filters to only those groups with more than one element. Finally it selects just the key from those groups as you don't need the count.
If you're prefer not to use LINQ, you can use this extension method:
public void SomeMethod {
var duplicateItems = list.GetDuplicates();
…
}
public static IEnumerable<T> GetDuplicates<T>(this IEnumerable<T> source) {
HashSet<T> itemsSeen = new HashSet<T>();
HashSet<T> itemsYielded = new HashSet<T>();
foreach (T item in source) {
if (!itemsSeen.Add(item)) {
if (itemsYielded.Add(item)) {
yield return item;
}
}
}
}
This keeps track of items it has seen and yielded. If it hasn't seen an item before, it adds it to the list of seen items, otherwise it ignores it. If it hasn't yielded an item before, it yields it, otherwise it ignores it.
Instead of [ngIf] you should use *ngIf like this:
<div *ngIf="isAuth" id="sidebar">
I didn't verify this myself, but you can look at this JavaScript implementation of Java's String.hashCode() method. Seems reasonably short.
With this prototype you can simply call
.hashCode()
on any string, e.g."some string".hashCode()
, and receive a numerical hash code (more specifically, a Java equivalent) such as 1395333309.
String.prototype.hashCode = function() {
var hash = 0;
if (this.length == 0) {
return hash;
}
for (var i = 0; i < this.length; i++) {
var char = this.charCodeAt(i);
hash = ((hash<<5)-hash)+char;
hash = hash & hash; // Convert to 32bit integer
}
return hash;
}
Found a workaround solution. Say that you want to scroll to an div, Element here for example, and you want to have a spacing of 20px above it. Set the ref to a created div above it:
<div ref={yourRef} style={{position: 'relative', bottom: 20}}/>
<Element />
Doing so will create this spacing that you want.
If you have a header, create an empty div as well behind the header and assign to it a height equal to the height of the header and reference it.
UNION
removes duplicate records (where all columns in the results are the same), UNION ALL
does not.
There is a performance hit when using UNION
instead of UNION ALL
, since the database server must do additional work to remove the duplicate rows, but usually you do not want the duplicates (especially when developing reports).
SELECT 'foo' AS bar UNION SELECT 'foo' AS bar
Result:
+-----+
| bar |
+-----+
| foo |
+-----+
1 row in set (0.00 sec)
SELECT 'foo' AS bar UNION ALL SELECT 'foo' AS bar
Result:
+-----+
| bar |
+-----+
| foo |
| foo |
+-----+
2 rows in set (0.00 sec)
Yes it is possible. I have been doing that all the while.
dynamic Obj = JsonConvert.DeserializeObject(<your json string>);
It is a bit trickier for non native type. Suppose inside your Obj, there is a ClassA, and ClassB objects. They are all converted to JObject. What you need to do is:
ClassA ObjA = Obj.ObjA.ToObject<ClassA>();
ClassB ObjB = Obj.ObjB.ToObject<ClassB>();
<!-- HTML -->
<a href="#google"></a>
<div id="google"></div>
/*CSS*/
html { scroll-behavior: smooth; }
Additionally, you can add html { scroll-behavior: smooth; } to your CSS to create a smooth scroll.
put the logic in
afterTextChanged(Editable s) {
string str = s.toString()
// use the string str
}
For a quick, clean solution that doesn't require you to name columns, you can use a prepared statement as described here: https://stackoverflow.com/a/23964285/292677
If you need a complex solution so you can do this often, you can use this procedure:
DELIMITER $$
CREATE PROCEDURE `duplicateRows`(_schemaName text, _tableName text, _whereClause text, _omitColumns text)
SQL SECURITY INVOKER
BEGIN
SELECT IF(TRIM(_omitColumns) <> '', CONCAT('id', ',', TRIM(_omitColumns)), 'id') INTO @omitColumns;
SELECT GROUP_CONCAT(COLUMN_NAME) FROM information_schema.columns
WHERE table_schema = _schemaName AND table_name = _tableName AND FIND_IN_SET(COLUMN_NAME,@omitColumns) = 0 ORDER BY ORDINAL_POSITION INTO @columns;
SET @sql = CONCAT('INSERT INTO ', _tableName, '(', @columns, ')',
'SELECT ', @columns,
' FROM ', _schemaName, '.', _tableName, ' ', _whereClause);
PREPARE stmt1 FROM @sql;
EXECUTE stmt1;
END
You can run it with:
CALL duplicateRows('database', 'table', 'WHERE condition = optional', 'omit_columns_optional');
Examples
duplicateRows('acl', 'users', 'WHERE id = 200'); -- will duplicate the row for the user with id 200
duplicateRows('acl', 'users', 'WHERE id = 200', 'created_ts'); -- same as above but will not copy the created_ts column value
duplicateRows('acl', 'users', 'WHERE id = 200', 'created_ts,updated_ts'); -- same as above but also omits the updated_ts column
duplicateRows('acl', 'users'); -- will duplicate all records in the table
DISCLAIMER: This solution is only for someone who will be repeatedly duplicating rows in many tables, often. It could be dangerous in the hands of a rogue user.
You can use a lookahead:
/(?=\S)[^\\]/
An alternative is to use StreamReader.
public void FunctionName(HttpPostedFileBase file)
{
string result = new StreamReader(file.InputStream).ReadToEnd();
}
You could modify .adm
and add
.adm{
clear:both;
}
That should make it move to a new line
There really isn't a single "answer" to this question, but there are definitely some helpful concepts that can help you to come to a decision.
The first question that needs to be answered in your use case is "Do I want to use the system Python?" If you want to use the Python distributed with your operating system, then using the apt-get install method may be just fine. Depending on the operating system distribution method though, you still have to ask some more questions, such as "Do I want to install multiple versions of this package?" If the answer is yes, then it is probably not a good idea to use something like apt. Dpkg pretty much will just untar an archive at the root of the filesystem, so it is up to the package maintainer to make sure the package installs safely under very little assumptions. In the case of most debian packages, I would assume (someone can feel free to correct me here) that they simply untar and provide a top level package.
For example, say the package is "virtualenv", you'd end up with /usr/lib/python2.x/site-packages/virtualenv
. If you install it with easy_install
you'd get something like /usr/lib/python2.x/site-packages/virtualenv.egg-link
that might point to /usr/lib/python2.x/site-packages/virtualenv-1.2-2.x.egg
which may be a directory or zipped egg. Pip does something similar although it doesn't use eggs and instead will place the top level package directly in the lib
directory.
I might be off on the paths, but the point is that each method takes into account different needs. This is why tools like virtualenv are helpful as they allow you to sandbox your Python libraries such that you can have any combination you need of libraries and versions.
Setuptools also allows installing packages as multiversion which means there is not a singular module_name.egg-link
created. To import those packages you need to use pkg_resources and the __import__
function.
Going back to your original question, if you are happy with the system python and plan on using virtualenv and pip to build environments for different applications, then installing virtualenv and / or pip at the system level using apt-get seems totally appropriate. One word of caution though is that if you plan on upgrading your distributions Python, that may have a ripple effect through your virtualenvs if you linked back to your system site packages.
I should also mention that none of these options is inherently better than the others. They simply take different approaches. Using the system version is an excellent way to install Python applications, yet it can be a very difficult way to develop with Python. Easy install and setuptools is very convenient in a world without virtualenv, but if you need to use different versions of the same library, then it also become rather unwieldy. Pip and virtualenv really act more like a virtual machine. Instead of taking care to install things side by side, you just create an whole new environment. The downside here is that 30+ virtualenvs later you might have used up quite bit of diskspace and cluttered up your filesystem.
As you can see, with the many options it is difficult to say which method to use, but with a little investigation into your use cases, you should be able to find a method that works.
The source code for the Android mobile application open-gpstracker which you appreciated is available here.
You can checkout the code using SVN client application or via Git:
Debugging the source code will surely help you.
String.prototype.repeat = function (n) { n = Math.abs(n) || 1; return Array(n + 1).join(this || ''); };
// console.log("0".repeat(3) , "0".repeat(-3))
// return: "000" "000"
This aggregate all the goodies:
psutil
+ os
to get Unix & Windows compatibility:
That allows us to get:
code:
import os
import psutil # need: pip install psutil
In [32]: psutil.virtual_memory()
Out[32]: svmem(total=6247907328, available=2502328320, percent=59.9, used=3327135744, free=167067648, active=3671199744, inactive=1662668800, buffers=844783616, cached=1908920320, shared=123912192, slab=613048320)
In [33]: psutil.virtual_memory().percent
Out[33]: 60.0
In [34]: psutil.cpu_percent()
Out[34]: 5.5
In [35]: os.sep
Out[35]: '/'
In [36]: psutil.disk_usage(os.sep)
Out[36]: sdiskusage(total=50190790656, used=41343860736, free=6467502080, percent=86.5)
In [37]: psutil.disk_usage(os.sep).percent
Out[37]: 86.5
I made this work in this way:
<button class="btn" ng-click='toggleClass($event)'>button one</button>
<button class="btn" ng-click='toggleClass($event)'>button two</button>
in your controller:
$scope.toggleClass = function (event) {
$(event.target).toggleClass('active');
}
Mergesort is the best you can do here.
Here's some variety for you with several sizes and hover animations.. demo(link)
<ul>
<li>Large</li>
<li>Medium</li>
<li>Small</li>
<li>Switch</li>
</ul>
<ul>
<li class="ele">
<div class="x large"><b></b><b></b><b></b><b></b></div>
<div class="x spin large"><b></b><b></b><b></b><b></b></div>
<div class="x spin large slow"><b></b><b></b><b></b><b></b></div>
<div class="x flop large"><b></b><b></b><b></b><b></b></div>
<div class="x t large"><b></b><b></b><b></b><b></b></div>
<div class="x shift large"><b></b><b></b><b></b><b></b></div>
</li>
<li class="ele">
<div class="x medium"><b></b><b></b><b></b><b></b></div>
<div class="x spin medium"><b></b><b></b><b></b><b></b></div>
<div class="x spin medium slow"><b></b><b></b><b></b><b></b></div>
<div class="x flop medium"><b></b><b></b><b></b><b></b></div>
<div class="x t medium"><b></b><b></b><b></b><b></b></div>
<div class="x shift medium"><b></b><b></b><b></b><b></b></div>
</li>
<li class="ele">
<div class="x small"><b></b><b></b><b></b><b></b></div>
<div class="x spin small"><b></b><b></b><b></b><b></b></div>
<div class="x spin small slow"><b></b><b></b><b></b><b></b></div>
<div class="x flop small"><b></b><b></b><b></b><b></b></div>
<div class="x t small"><b></b><b></b><b></b><b></b></div>
<div class="x shift small"><b></b><b></b><b></b><b></b></div>
<div class="x small grow"><b></b><b></b><b></b><b></b></div>
</li>
<li class="ele">
<div class="x switch"><b></b><b></b><b></b><b></b></div>
</li>
</ul>
css
.ele div.x {
-webkit-transition-duration:0.5s;
transition-duration:0.5s;
}
.ele div.x.slow {
-webkit-transition-duration:1s;
transition-duration:1s;
}
ul { list-style:none;float:left;display:block;width:100%; }
li { display:inline;width:25%;float:left; }
.ele { width:25%;display:inline; }
.x {
float:left;
position:relative;
margin:0;
padding:0;
overflow:hidden;
background:#CCC;
border-radius:2px;
border:solid 2px #FFF;
transition: all .3s ease-out;
cursor:pointer;
}
.x.large {
width:30px;
height:30px;
}
.x.medium {
width:20px;
height:20px;
}
.x.small {
width:10px;
height:10px;
}
.x.switch {
width:15px;
height:15px;
}
.x.grow {
}
.x.spin:hover{
background:#BB3333;
transform: rotate(180deg);
}
.x.flop:hover{
background:#BB3333;
transform: rotate(90deg);
}
.x.t:hover{
background:#BB3333;
transform: rotate(45deg);
}
.x.shift:hover{
background:#BB3333;
}
.x b{
display:block;
position:absolute;
height:0;
width:0;
padding:0;
margin:0;
}
.x.small b {
border:solid 5px rgba(255,255,255,0);
}
.x.medium b {
border:solid 10px rgba(255,255,255,0);
}
.x.large b {
border:solid 15px rgba(255,255,255,0);
}
.x.switch b {
border:solid 10px rgba(255,255,255,0);
}
.x b:nth-child(1){
border-top-color:#FFF;
top:-2px;
}
.x b:nth-child(2){
border-left-color:#FFF;
left:-2px;
}
.x b:nth-child(3){
border-bottom-color:#FFF;
bottom:-2px;
}
.x b:nth-child(4){
border-right-color:#FFF;
right:-2px;
}
With the following code you can load the controller classes and execute the methods.
This code was written for codeigniter 2.1
First add a new file MY_Loader.php
in your application/core directory. Add the following code to your newly created MY_Loader.php
file:
<?php if ( ! defined('BASEPATH')) exit('No direct script access allowed');
// written by AJ [email protected]
class MY_Loader extends CI_Loader
{
protected $_my_controller_paths = array();
protected $_my_controllers = array();
public function __construct()
{
parent::__construct();
$this->_my_controller_paths = array(APPPATH);
}
public function controller($controller, $name = '', $db_conn = FALSE)
{
if (is_array($controller))
{
foreach ($controller as $babe)
{
$this->controller($babe);
}
return;
}
if ($controller == '')
{
return;
}
$path = '';
// Is the controller in a sub-folder? If so, parse out the filename and path.
if (($last_slash = strrpos($controller, '/')) !== FALSE)
{
// The path is in front of the last slash
$path = substr($controller, 0, $last_slash + 1);
// And the controller name behind it
$controller = substr($controller, $last_slash + 1);
}
if ($name == '')
{
$name = $controller;
}
if (in_array($name, $this->_my_controllers, TRUE))
{
return;
}
$CI =& get_instance();
if (isset($CI->$name))
{
show_error('The controller name you are loading is the name of a resource that is already being used: '.$name);
}
$controller = strtolower($controller);
foreach ($this->_my_controller_paths as $mod_path)
{
if ( ! file_exists($mod_path.'controllers/'.$path.$controller.'.php'))
{
continue;
}
if ($db_conn !== FALSE AND ! class_exists('CI_DB'))
{
if ($db_conn === TRUE)
{
$db_conn = '';
}
$CI->load->database($db_conn, FALSE, TRUE);
}
if ( ! class_exists('CI_Controller'))
{
load_class('Controller', 'core');
}
require_once($mod_path.'controllers/'.$path.$controller.'.php');
$controller = ucfirst($controller);
$CI->$name = new $controller();
$this->_my_controllers[] = $name;
return;
}
// couldn't find the controller
show_error('Unable to locate the controller you have specified: '.$controller);
}
}
Now you can load all the controllers in your application/controllers directory. for example:
load the controller class Invoice and execute the function test()
$this->load->controller('invoice','invoice_controller');
$this->invoice_controller->test();
or when the class is within a dir
$this->load->controller('/dir/invoice','invoice_controller');
$this->invoice_controller->test();
It just works the same like loading a model
What is happening is that next(a)
returns the next value of a, which is printed to the console because it is not affected.
What you can do is affect a variable with this value:
>>> a = iter(list(range(10)))
>>> for i in a:
... print(i)
... b=next(a)
...
0
2
4
6
8
<select class="form-control" name='someting' [ngModel]="selectedWorkout" (ngModelChange)="updateWorkout($event)">
<option value="{{workout.name}}" *ngFor="#workout of workouts">{{workout.name}}</option>
</select>
If you are using form there should be name
field inside select
tag.
All you need to do is just add value
to the option
tag.
selectedWorkout
value should be "back" , and its done.
The Thread.stop()
method that could be used to stop a thread has been deprecated; for more info see; Why are Thread.stop, Thread.suspend and Thread.resume Deprecated?.
Your best bet is to have a variable which the thread itself consults, and voluntarily exits if the variable equals a certain value. You then manipulate the variable inside your code when you want the thread to exit. Alternately of course, you can use an AsyncTask
instead.
This method uses the 'C' memset function, and is very fast (avoids a char-by-char loop).
const uint size = 65546;
char* msg = new char[size];
memset(reinterpret_cast<void*>(msg), 0, size);
I was having having an issue with umake being an outdated version. What fixed it was:
sudo apt remove --purge ubuntu-make
sudo add-apt-repository ppa:ubuntu-desktop/ubuntu-make
sudo apt update
sudo apt install ubuntu-make
umake android
here is the thing i did for the same trouble i had.
when I'm passing the text to the next page in jsp, i'm reading it as a textarea instead of reading something like
so the output came as you wanted. and for other properties, you can use as below.
<textarea style="background-color: white; border: none; width:660px;font-family: Arial, Helvetica, sans-serif; font-size:1.0em; resize:none;" name="text" cols="75" rows="15" readonly="readonly" ><s:property value="%{text}"/></textarea>
Add &autoplay=1 to your syntax, like this
<iframe title="YouTube video player" width="480" height="390" src="http://www.youtube.com/embed/zGPuazETKkI&autoplay=1" frameborder="0" allowfullscreen></iframe>
Pandas uses numpy
's NaN value. Use numpy.isnan
to obtain a Boolean vector from a pandas series.
RuntimeHelpers.GetHashCode()
may help (MSDN).
what about this:
divH = divW = 0;
jQuery(document).ready(function(){
divW = jQuery("div").width();
divH = jQuery("div").height();
});
function checkResize(){
var w = jQuery("div").width();
var h = jQuery("div").height();
if (w != divW || h != divH) {
/*what ever*/
divH = h;
divW = w;
}
}
jQuery(window).resize(checkResize);
var timer = setInterval(checkResize, 1000);
BTW I suggest you to add an id to the div and change the $("div") to $("#yourid"), it's gonna be faster, and it won't break when later you add other divs
As per your question requirement , I would like to suggest that Map will solve your problem very efficient and without any hassle.
In Map you can give the name as key and your original object as value.
Map<String,Cave> myMap=new HashMap<String,Cave>();
Use which:
set.seed(1)
x <- sample(10, 50, replace = TRUE)
length(which(x > 3 & x < 5))
# [1] 6
You should create a new project in Code::Blocks, and make sure it's 'Console Application'.
Add your .cpp files into the project so they are all compiled and linked together.
Try something like this in your aspx page
<asp:Label ID="myLabel" runat="server"></asp:Label>
and then in your codebehind you can just do
myLabel.Text = "My Label";
if it is previous last commit.
git rebase -i HEAD~2
git commit --amend --date=now
if you already push to orgin and can force use:
git push --force
if you can't force the push and if it is pushed, you can't change the commit! .
Private Sub CommandButton1_Click()
Dim Z As Long
Dim Cellidx As Range
Dim NextRow As Long
Dim Rng As Range
Dim SrcWks As Worksheet
Dim DataWks As Worksheet
Z = 1
Set SrcWks = Worksheets("Sheet1")
Set DataWks = Worksheets("Sheet2")
Set Rng = EntryWks.Range("B6:ad6")
NextRow = DataWks.UsedRange.Rows.Count
NextRow = IIf(NextRow = 1, 1, NextRow + 1)
For Each RA In Rng.Areas
For Each Cellidx In RA
Z = Z + 1
DataWks.Cells(NextRow, Z) = Cellidx
Next Cellidx
Next RA
End Sub
Alternatively
Worksheets("Sheet2").Range("P2").Value = Worksheets("Sheet1").Range("L10")
This is a CopynPaste - Method
Sub CopyDataToPlan()
Dim LDate As String
Dim LColumn As Integer
Dim LFound As Boolean
On Error GoTo Err_Execute
'Retrieve date value to search for
LDate = Sheets("Rolling Plan").Range("B4").Value
Sheets("Plan").Select
'Start at column B
LColumn = 2
LFound = False
While LFound = False
'Encountered blank cell in row 2, terminate search
If Len(Cells(2, LColumn)) = 0 Then
MsgBox "No matching date was found."
Exit Sub
'Found match in row 2
ElseIf Cells(2, LColumn) = LDate Then
'Select values to copy from "Rolling Plan" sheet
Sheets("Rolling Plan").Select
Range("B5:H6").Select
Selection.Copy
'Paste onto "Plan" sheet
Sheets("Plan").Select
Cells(3, LColumn).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
LFound = True
MsgBox "The data has been successfully copied."
'Continue searching
Else
LColumn = LColumn + 1
End If
Wend
Exit Sub
Err_Execute:
MsgBox "An error occurred."
End Sub
And there might be some methods doing that in Excel.
How to easily throttle to a specific FPS:
// timestamps are ms passed since document creation.
// lastTimestamp can be initialized to 0, if main loop is executed immediately
var lastTimestamp = 0,
maxFPS = 30,
timestep = 1000 / maxFPS; // ms for each frame
function main(timestamp) {
window.requestAnimationFrame(main);
// skip if timestep ms hasn't passed since last frame
if (timestamp - lastTimestamp < timestep) return;
lastTimestamp = timestamp;
// draw frame here
}
window.requestAnimationFrame(main);
Source: A Detailed Explanation of JavaScript Game Loops and Timing by Isaac Sukin
select * from dbMaster oMaster where ((CAST(GETDATE() as time)) between (CAST(oMaster.DateFrom as time)) and
(CAST(oMaster.DateTo as time)))
Please check this
I've seen a couple cases where this error occurs:
!=
in a where
clause with a list of multiple or
valuessuch as:
where columnName !=('A'||'B')
This can be resolved by using
where columnName not in ('A','B')
if()
function:select if(col1,col1,col2);
in order to select the value in col1
if it exists and otherwise show the value in col2
...this throws the error; it can be resolved by using:
select if(col1!='',col1,col2);
For that you need to enter one command that is missing from bitbucket commands
Please try git init.
The Best way is do not use any pairing code.
Instead of onClick
go to other function or other class where You create the socket using UUID.
Android automatically pops up for pairing if already not paired.
or see this link for better understanding
Below is code for the same:
private OnItemClickListener mDeviceClickListener = new OnItemClickListener() {
public void onItemClick(AdapterView<?> av, View v, int arg2, long arg3) {
// Cancel discovery because it's costly and we're about to connect
mBtAdapter.cancelDiscovery();
// Get the device MAC address, which is the last 17 chars in the View
String info = ((TextView) v).getText().toString();
String address = info.substring(info.length() - 17);
// Create the result Intent and include the MAC address
Intent intent = new Intent();
intent.putExtra(EXTRA_DEVICE_ADDRESS, address);
// Set result and finish this Activity
setResult(Activity.RESULT_OK, intent);
// **add this 2 line code**
Intent myIntent = new Intent(view.getContext(), Connect.class);
startActivityForResult(myIntent, 0);
finish();
}
};
Connect.java file is :
public class Connect extends Activity {
private static final String TAG = "zeoconnect";
private ByteBuffer localByteBuffer;
private InputStream in;
byte[] arrayOfByte = new byte[4096];
int bytes;
public BluetoothDevice mDevice;
@Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.connect);
try {
setup();
} catch (ZeoMessageException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (ZeoMessageParseException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
}
private void setup() throws ZeoMessageException, ZeoMessageParseException {
// TODO Auto-generated method stub
getApplicationContext().registerReceiver(receiver,
new IntentFilter(BluetoothDevice.ACTION_ACL_CONNECTED));
getApplicationContext().registerReceiver(receiver,
new IntentFilter(BluetoothDevice.ACTION_ACL_DISCONNECTED));
BluetoothDevice zee = BluetoothAdapter.getDefaultAdapter().
getRemoteDevice("**:**:**:**:**:**");// add device mac adress
try {
sock = zee.createRfcommSocketToServiceRecord(
UUID.fromString("*******************")); // use unique UUID
} catch (IOException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
}
Log.d(TAG, "++++ Connecting");
try {
sock.connect();
} catch (IOException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
}
Log.d(TAG, "++++ Connected");
try {
in = sock.getInputStream();
} catch (IOException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
}
Log.d(TAG, "++++ Listening...");
while (true) {
try {
bytes = in.read(arrayOfByte);
Log.d(TAG, "++++ Read "+ bytes +" bytes");
} catch (IOException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
}
Log.d(TAG, "++++ Done: test()");
}}
private static final LogBroadcastReceiver receiver = new LogBroadcastReceiver();
public static class LogBroadcastReceiver extends BroadcastReceiver {
@Override
public void onReceive(Context paramAnonymousContext, Intent paramAnonymousIntent) {
Log.d("ZeoReceiver", paramAnonymousIntent.toString());
Bundle extras = paramAnonymousIntent.getExtras();
for (String k : extras.keySet()) {
Log.d("ZeoReceiver", " Extra: "+ extras.get(k).toString());
}
}
};
private BluetoothSocket sock;
@Override
public void onDestroy() {
getApplicationContext().unregisterReceiver(receiver);
if (sock != null) {
try {
sock.close();
} catch (IOException e) {
e.printStackTrace();
}
}
super.onDestroy();
}
}
Check \httpdocs\bootstrap\cache\config.php file in plesk to see if there are some unwanted paths.
Your formula should be of the form =IF(X2 >= 85,0.559,IF(X2 >= 80,0.327,IF(X2 >=75,0.255,0)))
. This simulates the ELSE-IF
operand Excel lacks. Your formulas were using two conditions in each, but the second parameter of the IF
formula is the value to use if the condition evaluates to true
. You can't chain conditions in that manner.
The question is old, but maybe, somebody need an actual answer.
In the QGIS 3.4 you can get the value from the QComboBox
with the method currentData()
.
Example: comboBox.currentData()
Link: https://doc.qt.io/qt-5/qcombobox.html#currentData-prop
As pointed out, "&" in python performs a bitwise and operation, just as it does in C#. and
is the appropriate equivalent to the &&
operator.
Since we're dealing with booleans (i == 5
is True
and ii == 10
is also True
), you may wonder why this didn't either work anyway (True being treated as an integer quantity should still mean True & True is a True value), or throw an exception (eg. by forbidding bitwise operations on boolean types)
The reason is operator precedence. The "and
" operator binds more loosely than ==
, so the expression: "i==5 and ii==10
" is equivalent to: "(i==5) and (ii==10)
"
However, bitwise &
has a higher precedence than "==
" (since you wouldn't want expressions like "a & 0xff == ch
" to mean "a & (0xff == ch)
"), so the expression would actually be interpreted as:
if i == (5 & ii) == 10:
Which is using python's operator chaining to mean: does the valuee of ii anded with 5 equal both i and 10. Obviously this will never be true.
You would actually get (seemingly) the right answer if you had included brackets to force the precedence, so:
if (i==5) & (ii=10)
would cause the statement to be printed. It's the wrong thing to do, however - "&
" has many different semantics to "and
" - (precedence, short-cirtuiting, behaviour with integer arguments etc), so it's fortunate that you caught this here rather than being fooled till it produced less obvious bugs.
Converting a JKS KeyStore to a single PEM file can easily be accomplished using the following command:
keytool -list -rfc -keystore "myKeystore.jks" | sed -e "/-*BEGIN [A-Z]*-*/,/-*END [A-Z]-*/!d" >> "myKeystore.pem"
Explanation:
keytool -list -rfc -keystore "myKeystore.jks"
lists everything in the 'myKeyStore.jks' KeyStore in PEM format. However, it also prints extra information.| sed -e "/-*BEGIN [A-Z]*-*/,/-*END [A-Z]-*/!d"
filters out everything we don't need. We are left with only the PEMs of everything in the KeyStore.>> "myKeystore.pem"
write the PEMs to the file 'myKeyStore.pem'.just set the width of the td/column you want to be fixed and the rest will expand.
<td width="200"></td>
Use the :disabled
CSS3 pseudo-selector
I've been using ClosedXML and it works great!
ClosedXML makes it easier for developers to create Excel 2007/2010 files. It provides a nice object oriented way to manipulate the files (similar to VBA) without dealing with the hassles of XML Documents. It can be used by any .NET language like C# and Visual Basic (VB).
The code below works. Replace the text within the single quotes with your image name. If it is in the same folder, if not add ../foldername/'yourimagename' I hope that helps.
NOTE:
use of the single quotes by most of the programmers is not advised but I use it and it works. Also, if you would write a PHP you would appreciate what it can do i.e. add the background image automatically from the variable etc.
<html>
<head>
<style type="text/css">
.btn-pTool{
margin:0;
padding:0;
background-image: url('your name of the field');
height:100px;
width:200px;
display:block;
}
.btn-pToolName{
text-align: center;
width: 26px;
height: 190px;
display: block;
color: #fff;
text-decoration: none;
font-family: Arial, Helvetica, sans-serif;
font-weight: bold;
font-size: 1em;
line-height: 32px;
}
</style>
</head>
<body>
<div class="pToolContainer">
<span class="btn-pTool"><a class="btn-pToolName" href="#">Test text</a></span>
<div class="pToolSlidePanel">Test text</div>
</div>
</body>
</html>
cd ios && rm Podfile.lock && pod install
worked for me.
I had something similar when passing a script to a function with invoke-command. I ran the command in single quotes instead of double quotes, because it then becomes a string literal. 'Set-Mailbox $sourceUser -LitigationHoldEnabled $false -ElcProcessingDisabled $true';
The signature:
bool operator<<(const obj&, const obj&);
Seems rather suspect, this does not fit the stream
convention nor the bitwise convention so it looks like a case of operator overloading abuse, operator <
should return bool
but operator <<
should probably return something else.
If you meant so say:
ostream& operator<<(ostream&, const obj&);
Then since you can't add functions to ostream
by necessity the function must be a free function, whether it a friend
or not depends on what it has to access (if it doesn't need to access private or protected members there's no need to make it friend).
You need an HTML element for each column in your layout.
I’d suggest:
<div class="two-col">
<div class="col1">
<label for="field1">Field One:</label>
<input id="field1" name="field1" type="text">
</div>
<div class="col2">
<label for="field2">Field Two:</label>
<input id="field2" name="field2" type="text">
</div>
</div>
.two-col {
overflow: hidden;/* Makes this div contain its floats */
}
.two-col .col1,
.two-col .col2 {
width: 49%;
}
.two-col .col1 {
float: left;
}
.two-col .col2 {
float: right;
}
.two-col label {
display: block;
}
You don't need to ALTER
any table. Just use the following queries, prior to the actual SELECT
query that you want to use the wildcard:
set names `utf8`;
SET COLLATION_CONNECTION=utf8_general_ci;
SET CHARACTER_SET_CLIENT=utf8;
SET CHARACTER_SET_RESULTS=utf8;
[0-9]{4,6}
can be shortened to \d{4,6}
Use a join with a temporary table. You don't need to pass temporary tables to functions, they are global.
create temporary table ids( id int ) ;
insert into ids values (1),(2),(3) ;
delimiter //
drop procedure if exists tsel //
create procedure tsel() -- uses temporary table named ids. no params
READS SQL DATA
BEGIN
-- use the temporary table `ids` in the SELECT statement or
-- whatever query you have
select * from Users INNER JOIN ids on userId=ids.id ;
END //
DELIMITER ;
CALL tsel() ; -- call the procedure
It's producing enumerable sequence. What it does is actually creating local IEnumerable sequence and returning it as a method result
Add the following code into your .vimrc
:
if has('clipboard')
if has('unnamedplus') " When possible use + register for copy-paste
set clipboard=unnamed,unnamedplus
else " On mac and Windows, use * register for copy-paste
set clipboard=unnamed
endif
endif
I often do this:
arr = ["a", "b", "c"]
(0...arr.length).map do |int|
[arr[int], int + 2]
end
#=> [["a", 2], ["b", 3], ["c", 4]]
Instead of directly iterating over the elements of the array, you're iterating over a range of integers and using them as the indices to retrieve the elements of the array.
TGrid is another option that people don't usually find in a google search. If the other grids you find don't suit your needs, you can give it a try, its free
Update August 2019
In Android Studio 3.5 Instant Run was replaced with Apply Changes. And it works in different way: APK is not modified on the fly anymore but instead runtime instrumentation is used to redefine classes on the fly (more info). So since Android Studio 3.5 instant run settings are replaced with Deployment (Settings -> Build, Execution, Deployment -> Deployment):
An optional prefix
!
which negates the pattern; any matching file excluded by a previous pattern will become included again. If a negated pattern matches, this will override lower precedence patterns sources.
http://schacon.github.com/git/gitignore.html
*.json
!spec/*.json
As of right now, I do not know of any. It appears the code academy folks have set their sites on Ruby on Rails. They do not rule Java out of the picture however.
In java8 you no longer need to use Collections.sort method as LinkedList inherits the method sort from java.util.List, so adapting Fido's answer to Java8:
LinkedList<String>list = new LinkedList<String>();
list.add("abc");
list.add("Bcd");
list.add("aAb");
list.sort( new Comparator<String>(){
@Override
public int compare(String o1,String o2){
return Collator.getInstance().compare(o1,o2);
}
});
References:
http://docs.oracle.com/javase/8/docs/api/java/util/LinkedList.html
http://docs.oracle.com/javase/7/docs/api/java/util/List.html
Where I work we have been using this method on all of our repositories for a few years without any problems (except when we create a new repository and forget to set it up this way):
Change the group id of the repository to a group shared by all users who are allowed to push to it:
chgrp -R shared_group /git/our_repos
chmod -R g+w /git/our_repos
Set the setgid bit on all directories in the repository so that new files/directories keep the same group:
find /git/our_repos -type d -exec chmod g+s {} +
Add this line to the pre-receive hook in the repository to ensure new file permissions allow group read/write:
umask 007
You can do this by changing the gradle file.
build.gradle > change
dependencies {
classpath 'com.android.tools.build:gradle:3.0.1'
}
gradle-wrapper.properties > update
distributionUrl=https://services.gradle.org/distributions/gradle-4.6-all.zip
Without using Collections in Java:
import java.util.Scanner;
public class SortingaString {
public static String Sort(String s1)
{
char ch[]=s1.toCharArray();
String res=" ";
for(int i=0; i<ch.length ; i++)
{
for(int j=i+1;j<ch.length; j++)
{
if(ch[i]>=ch[j])
{
char m=ch[i];
ch[i]=ch[j];
ch[j]=m;
}
}
res=res+ch[i];
}
return res;
}
public static void main(String[] args) {
Scanner sc=new Scanner(System.in);
System.out.println("enter the string");
String s1=sc.next();
String ans=Sort( s1);
System.out.println("after sorting=="+ans);
}
}
Output:
enter the string==
sorting
after sorting== ginorst
I have resolved this problem by adding or changing variables in environment variables. Go to Win7 -> My Computer - > Properties - > Advanced system settings -> environment Variables
Good Luck
MS already made a method for this, so you dont have to use the null coalescing operator. No difference in functionality, but it is easier for non-experts to get what is happening at a glance.
DateTime updatedTime = _objHotelPackageOrder.UpdatedDate.GetValueOrDefault(DateTime.Now);
Keep the first 19 characters that you wanted via slicing:
>>> str(datetime.datetime.now())[:19]
'2011-11-03 14:37:50'
You can use row_number()
to get the row number of the row. It uses the over
command - the partition by
clause specifies when to restart the numbering and the order by
selects what to order the row number on. Even if you added an order by
to the end of your query, it would preserve the ordering in the over
command when numbering.
select *
from mytable
where row_number() over(partition by Name order by AddressLine) = 1
I am highlighting the solution in both 1.9 and 2.0 since it is useful for some
In 1.9
, I think the better solution is to save the file to disk and use it as Typed file like:
(I don't know about your server-side implementation) have an API interface method similar to this
@POST("/en/Api/Results/UploadFile")
void UploadFile(@Part("file") TypedFile file,
@Part("folder") String folder,
Callback<Response> callback);
And use it like
TypedFile file = new TypedFile("multipart/form-data",
new File(path));
API Interface:
public interface ApiInterface {
@Multipart
@POST("/api/Accounts/editaccount")
Call<User> editUser(@Header("Authorization") String authorization,
@Part("file\"; filename=\"pp.png\" ") RequestBody file,
@Part("FirstName") RequestBody fname,
@Part("Id") RequestBody id);
}
Use it like:
File file = new File(imageUri.getPath());
RequestBody fbody = RequestBody.create(MediaType.parse("image/*"),
file);
RequestBody name = RequestBody.create(MediaType.parse("text/plain"),
firstNameField.getText()
.toString());
RequestBody id = RequestBody.create(MediaType.parse("text/plain"),
AZUtils.getUserId(this));
Call<User> call = client.editUser(AZUtils.getToken(this),
fbody,
name,
id);
call.enqueue(new Callback<User>() {
@Override
public void onResponse(retrofit.Response<User> response,
Retrofit retrofit) {
AZUtils.printObject(response.body());
}
@Override
public void onFailure(Throwable t) {
t.printStackTrace();
}
});
You can make git replace the protocol for you
git config --global url."https://".insteadOf git://
See more at SO Bower install using only https?