This isn't appropriate in all situations but you can conditionally return false inside the component itself if a certain criteria is or isn't met.

It doesn't unmount the component, but it removes all rendered content. This would only be bad, in my mind, if you have event listeners in the component that should be removed when the component is no longer needed.

import React, { Component } from 'react';

export default class MyComponent extends Component {
    constructor(props) {
        super(props);

        this.state = {
            hideComponent: false
        }
    }

    closeThis = () => {
        this.setState(prevState => ({
            hideComponent: !prevState.hideComponent
        })
    });

    render() {
        if (this.state.hideComponent === true) {return false;}

        return (
            <div className={`content`} onClick={() => this.closeThis}>
                YOUR CODE HERE
            </div>
        );
    }
}

Updated for Swift 3

I came here just wanting to dismiss the current (presented) View Controller. I'm making this answer for anyone coming here with the same purpose.

Navigation Controller

If you are using a navigation controller, then it is quite easy.

Go back to the previous view controller:

// Swift
self.navigationController?.popViewController(animated: true)

// Objective-C
[self.navigationController popViewControllerAnimated:YES];

Go back to the root view controller:

// Swift
self.navigationController?.popToRootViewController(animated: true)

// Objective-C
[self.navigationController popToRootViewControllerAnimated:YES];

(Thanks to this answer for the Objective-C.)

Modal View Controller

When a View Controller is presented modally, you can dismiss it (from the second view controller) by calling

// Swift
self.dismiss(animated: true, completion: nil)

// Objective-C
[self dismissViewControllerAnimated:YES completion:nil];

The documentation says,

The presenting view controller is responsible for dismissing the view controller it presented. If you call this method on the presented view controller itself, UIKit asks the presenting view controller to handle the dismissal.

So it works for the presented view controller to call it on itself. Here is a full example.

Delegates

The OP's question was about the complexity of using delegates to dismiss a view.

• This Objective-C answer goes into it quite a bit.
• Here is a Swift example.

To this point I have not needed to use delegates since I usually have a navigation controller or modal view controllers, but if I do need to use the delegate pattern in the future, I will add an update.

Prerequisite:

Your APK needs to be signed by system as correctly pointed out earlier. One way to achieve that is building the AOSP image yourself and adding the source code into the build.

Code:

Once installed as a system app, you can use the package manager methods to install and uninstall an APK as following:

Install:

public boolean install(final String apkPath, final Context context) {
    Log.d(TAG, "Installing apk at " + apkPath);
    try {
        final Uri apkUri = Uri.fromFile(new File(apkPath));
        final String installerPackageName = "MyInstaller";
        context.getPackageManager().installPackage(apkUri, installObserver, PackageManager.INSTALL_REPLACE_EXISTING, installerPackageName);
        return true;
    } catch (Exception e) {
        e.printStackTrace();
        return false;
    }
}

Uninstall:

public boolean uninstall(final String packageName, final Context context) {
    Log.d(TAG, "Uninstalling package " + packageName);
    try {
        context.getPackageManager().deletePackage(packageName, deleteObserver, PackageManager.DELETE_ALL_USERS);
        return true;
    } catch (Exception e) {
        e.printStackTrace();
        return false;
    }
}

To have a callback once your APK is installed/uninstalled you can use this:

/**
 * Callback after a package was installed be it success or failure.
 */
private class InstallObserver implements IPackageInstallObserver {

    @Override
    public void packageInstalled(String packageName, int returnCode) throws RemoteException {

        if (packageName != null) {
            Log.d(TAG, "Successfully installed package " + packageName);
            callback.onAppInstalled(true, packageName);
        } else {
            Log.e(TAG, "Failed to install package.");
            callback.onAppInstalled(false, null);
        }
    }

    @Override
    public IBinder asBinder() {
        return null;
    }
}

/**
 * Callback after a package was deleted be it success or failure.
 */
private class DeleteObserver implements IPackageDeleteObserver {

    @Override
    public void packageDeleted(String packageName, int returnCode) throws RemoteException {
        if (packageName != null) {
            Log.d(TAG, "Successfully uninstalled package " + packageName);
            callback.onAppUninstalled(true, packageName);
        } else {
            Log.e(TAG, "Failed to uninstall package.");
            callback.onAppUninstalled(false, null);
        }
    }

    @Override
    public IBinder asBinder() {
        return null;
    }
}

/**
 * Callback to give the flow back to the calling class.
 */
public interface InstallerCallback {
    void onAppInstalled(final boolean success, final String packageName);
    void onAppUninstalled(final boolean success, final String packageName);
}

The Difference Between The Two

The main difference between a "factory method" and an "abstract factory" is that the factory method is a method, and an abstract factory is an object. I think a lot of people get these two terms confused, and start using them interchangeably. I remember that I had a hard time finding exactly what the difference was when I learnt them.

Because the factory method is just a method, it can be overridden in a subclass, hence the second half of your quote:

... the Factory Method pattern uses inheritance and relies on a subclass to handle the desired object instantiation.

The quote assumes that an object is calling its own factory method here. Therefore the only thing that could change the return value would be a subclass.

The abstract factory is an object that has multiple factory methods on it. Looking at the first half of your quote:

... with the Abstract Factory pattern, a class delegates the responsibility of object instantiation to another object via composition ...

What they're saying is that there is an object A, who wants to make a Foo object. Instead of making the Foo object itself (e.g., with a factory method), it's going to get a different object (the abstract factory) to create the Foo object.

Code Examples

To show you the difference, here is a factory method in use:

class A {
    public void doSomething() {
        Foo f = makeFoo();
        f.whatever();   
    }

    protected Foo makeFoo() {
        return new RegularFoo();
    }
}

class B extends A {
    protected Foo makeFoo() {
        //subclass is overriding the factory method 
        //to return something different
        return new SpecialFoo();
    }
}

And here is an abstract factory in use:

class A {
    private Factory factory;

    public A(Factory factory) {
        this.factory = factory;
    }

    public void doSomething() {
        //The concrete class of "f" depends on the concrete class
        //of the factory passed into the constructor. If you provide a
        //different factory, you get a different Foo object.
        Foo f = factory.makeFoo();
        f.whatever();
    }
}

interface Factory {
    Foo makeFoo();
    Bar makeBar();
    Aycufcn makeAmbiguousYetCommonlyUsedFakeClassName();
}

//need to make concrete factories that implement the "Factory" interface here

IMHO, there is not much difference in case of web application if you look at it from the angle of responsibility assignment. However, keep the clarity in the layer. Keep anything purely for the presentation purpose in the presentation layer, like the control and code specific to the web controls. Just keep your entities in the business layer and all features (like add, edit, delete) etc in the business layer. However rendering them onto the browser to be handled in the presentation layer. For .Net, the ASP.NET MVC pattern is very good in terms of keeping the layers separated. Look into the MVC pattern.

a) When a cdecl function is called by the caller, how does a caller know if it should free up the stack?

The cdecl modifier is part of the function prototype (or function pointer type etc.) so the caller get the info from there and acts accordingly.

b) If a function which is declared as stdcall calls a function(which has a calling convention as cdecl), or the other way round, would this be inappropriate?

No, it's fine.

c) In general, can we say that which call will be faster - cdecl or stdcall?

In general, I would refrain from any such statements. The distinction matters eg. when you want to use va_arg functions. In theory, it could be that stdcall is faster and generates smaller code because it allows to combine popping the arguments with popping the locals, but OTOH with cdecl, you can do the same thing, too, if you're clever.

The calling conventions that aim to be faster usually do some register-passing.

For one more example of the actual use of unions, the CORBA framework serializes objects using the tagged union approach. All user-defined classes are members of one (huge) union, and an integer identifier tells the demarshaller how to interpret the union.

I believe those who study typography would tell you that 66 characters per a line is supposed to be the most readable width for length. Even so, if you need to debug a machine remotely over an ssh session, most terminals default to 80 characters, 79 just fits, trying to work with anything wider becomes a real pain in such a case. You would also be suprised by the number of developers using vim + screen as a day to day environment.

Update the child to have the attribute 'key' equal to the name. The component will re-render every time the key changes.

Child {
  render() {
    return <div key={this.props.bar}>{this.props.bar}</div>
  }
}

From about section of Reverse IP Domain Check tool on yougetsignal:

A reverse IP domain check takes a domain name or IP address pointing to a web server and searches for other sites known to be hosted on that same web server. Data is gathered from search engine results, which are not guaranteed to be complete.

While @tymeJV gave a correct answer, the way to do this to be inline with angular would be:

ng-click="hidePrefs()"

and then in your controller:

$scope.hidePrefs = function() {  
  $scope.prefs = false;
}

I found something interesting in SQL server when checking if inner joins are faster than left joins.

If you dont include the items of the left joined table, in the select statement, the left join will be faster than the same query with inner join.

If you do include the left joined table in the select statement, the inner join with the same query was equal or faster than the left join.

This could be pretty ugly, but doesn't Chrome use the NPAPI for plugins like Safari? In that case, you could write a wrapper plugin with the NPAPI that made the appropriate ActiveX creation and calls to run the plugin. If you do a lot of scripting against those plugins, you might have to be a bit of work to proxy those calls through to the wrapped ActiveX control.

Maybe this is not the answer you needed, but I encountered similar problem, so I decided to put it here.

I needed to convert 500 xml files to UTF8 via Notepad++. Why Notepad++? When I used the option "Encode in UTF8" (many other converters use the same logic) it messed up all special characters, so I had to use "Convert to UTF8" explicitly.

Here some simple steps to convert multiple files via Notepad++ without messing up with special characters (for ex. diacritical marks).

1. Run Notepad++ and then open menu Plugins->Plugin Manager->Show Plugin Manager
2. Install Python Script. When plugin is installed, restart the application.
3. Choose menu Plugins->Python Script->New script.
4. Choose its name, and then past the following code:

convertToUTF8.py

import os
import sys
from Npp import notepad # import it first!

filePathSrc="C:\\Users\\" # Path to the folder with files to convert
for root, dirs, files in os.walk(filePathSrc):
    for fn in files: 
        if fn[-4:] == '.xml': # Specify type of the files
            notepad.open(root + "\\" + fn)      
            notepad.runMenuCommand("Encoding", "Convert to UTF-8")
            # notepad.save()
            # if you try to save/replace the file, an annoying confirmation window would popup.
            notepad.saveAs("{}{}".format(fn[:-4], '_utf8.xml')) 
            notepad.close()

After all, run the script

You are overwriting the start date object with the value of a DOM Element with an id of Startdate.

This should work:

var start = new Date(document.getElementById('Stardate').value);

var y = start.getFullYear();

In 8-2017 Microsoft came out with System.Configuration for .NET CORE v4.4. Currently v4.5 and v4.6 preview.

For those of us, who works on transformation from .Net Framework to CORE, this is essential. It allows to keep and use current app.config files, which can be accessed from any assembly. It is probably even can be an alternative to appsettings.json, since Microsoft realized the need for it. It works same as before in FW. There is one difference:

In the web applications, [e.g. ASP.NET CORE WEB API] you need to use app.config and not web.config for your appSettings or configurationSection. You might need to use web.config but only if you deploying your site via IIS. You place IIS-specific settings into web.config

I've tested it with netstandard20 DLL and Asp.net Core Web Api and it is all working.

I got the "No signing certificate" error when running Xcode 11.3 on macOS 10.14.x Mojave. (but after Xcode 12 was released.)

I was also using Fastlane. My fix was to set generate_apple_certs to false when running Match. This seemed to generate signing certificates that were backwards-compatible with Xcode 11.3

Match documentation - https://docs.fastlane.tools/actions/match/

This is the relevant section of my Fastfile:

platform :ios do
  lane :certs do
    force = false
    match(type: "development", generate_apple_certs: false, force: force, app_identifier: "your.app.identifier.dev")
    match(type: "adhoc",       generate_apple_certs: false, force: force, app_identifier: "your.app.identifier.beta")
    match(type: "appstore",    generate_apple_certs: false, force: force, app_identifier: "your.app.identifier")
  end

  ...

I'm guessing this is what you want...

When the form is submitted, check if the value is empty and if so, send a value = empty.

If so, you could do the following with jQuery.

$('form').submit(function(){
    var input = $('#test').val();
    if(input == ''){
         $('#test').val('empty');
    }    
});

HTML

<form> 
    <input id="test" type="text" />
</form>

http://jsfiddle.net/jasongennaro/NS6Ca/

Click your cursor in the box and then hit enter to see the form submit the value.

If you have SublimeLinter installed, your theme (at least it ST3) may end up in .../Packages/User/SublimeLinter/[ your-chosen-theme ]

As mentioned above - find the nested 'settings' dict and edit or add the 'lineHighlight' entry with your desired #RRGGBB or #RRGGBBAA. I like #0000AA99 when on a black(ish) background.

Handy tool if you do not know your color combinations: RGBtoHEX and HEXtoRGB

Your default alignment is probably 4 bytes. Either the 30 byte element got 32, or the structure as a whole was rounded up to the next 4 byte interval.

to remove all shared memory segments on FreeBSD

#!/bin/sh
for i in $(ipcs -m | awk '{ print $2 }' | sed 1,2d);
do
    echo "ipcrm -m $i"
    ipcrm -m $i
done

to remove all semaphores

#!/bin/sh
for i in $(ipcs -s | awk '{ print $2 }' | sed 1,2d);
do
    echo "ipcrm -s $i"
    ipcrm -s $i
done

You may use:

• Array.prototype.map()
• Array.prototype.reduce()
• Arrow functions
• Comma operator

To create array of objects:

var source = ['left', 'top'];
const result = source.map(arrValue => ({[arrValue]: 0}));

Demo:

var source = ['left', 'top'];_x000D_
_x000D_
const result = source.map(value => ({[value]: 0}));_x000D_
_x000D_
console.log(result);

Or if you wants to create a single object from values of arrays:

var source = ['left', 'top'];
const result = source.reduce((obj, arrValue) => (obj[arrValue] = 0, obj), {});

Demo:

var source = ['left', 'top'];_x000D_
_x000D_
const result = source.reduce((obj, arrValue) => (obj[arrValue] = 0, obj), {});_x000D_
_x000D_
console.log(result);

Here's a little cmd script you can copy-n-paste into a file named something like where.cmd:

@echo off
rem - search for the given file in the directories specified by the path, and display the first match
rem
rem    The main ideas for this script were taken from Raymond Chen's blog:
rem
rem         http://blogs.msdn.com/b/oldnewthing/archive/2005/01/20/357225.asp
rem
rem
rem - it'll be nice to at some point extend this so it won't stop on the first match. That'll
rem     help diagnose situations with a conflict of some sort.
rem

setlocal

rem - search the current directory as well as those in the path
set PATHLIST=.;%PATH%
set EXTLIST=%PATHEXT%

if not "%EXTLIST%" == "" goto :extlist_ok
set EXTLIST=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
:extlist_ok

rem - first look for the file as given (not adding extensions)
for %%i in (%1) do if NOT "%%~$PATHLIST:i"=="" echo %%~$PATHLIST:i

rem - now look for the file adding extensions from the EXTLIST
for %%e in (%EXTLIST%) do @for %%i in (%1%%e) do if NOT "%%~$PATHLIST:i"=="" echo %%~$PATHLIST:i

This is what you have to do

var fileVariable =document.getElementsById('fileId').files[0];

If you want to check for image file types then

if(fileVariable.type.match('image.*'))
{
 alert('its an image');
}

No! It's not a joke.

Take a look here: http://msdn.microsoft.com/en-us/library/ms186939.aspx

Character data types that are either fixed-length, nchar, or variable-length, nvarchar, Unicode data and use the UNICODE UCS-2 character set.

And also here: http://en.wikipedia.org/wiki/UTF-16

The older UCS-2 (2-byte Universal Character Set) is a similar character encoding that was superseded by UTF-16 in version 2.0 of the Unicode standard in July 1996.

Not really as far as I know but here are couple things you can try.

Third party tools: Create empty database on 2008 instance and use third party tools such as ApexSQL Diff and Data Diff to synchronize schema and tables.

Just use these (or any other on the market such as Red Gate, Idera, Dev Art, there are many similar) in trial mode to get the job done.

Generate scripts: Go to Tasks -> Generate Scripts, select option to script the data too and execute it on 2008 instance. Works just fine but note that script order is something you must be careful about. By default scripts are not ordered to take dependencies into account.

If $arrayofStringsNotInterestedIn is an [array] you should use -notcontains:

Get-Content $FileName | foreach-object { `
   if ($arrayofStringsNotInterestedIn -notcontains $_) { $) }

or better (IMO)

Get-Content $FileName | where { $arrayofStringsNotInterestedIn -notcontains $_}

You should do:

try:
    value_index = my_list.index(value)
except:
    value_index = -1;

If you're comparing different branches, you need to use -- to separate a Git revision from a filesystem path. For example, with two local branches, master and bryan-working:

$ git diff master -- AFolderOfCode/ bryan-working -- AFolderOfCode/

Or from a local branch to a remote:

$ git diff master -- AFolderOfCode/ origin/master -- AFolderOfCode/

http://wiki.bash-hackers.org/scripting/posparams

It explains the use of shift (if you want to discard the first N parameters) and then implementing Mass Usage

The Get-ChildItem cmdlet has an -Exclude parameter that is tempting to use but it doesn't work for filtering out entire directories from what I can tell. Try something like this:

function GetFiles($path = $pwd, [string[]]$exclude) 
{ 
    foreach ($item in Get-ChildItem $path)
    {
        if ($exclude | Where {$item -like $_}) { continue }

        if (Test-Path $item.FullName -PathType Container) 
        {
            $item 
            GetFiles $item.FullName $exclude
        } 
        else 
        { 
            $item 
        }
    } 
}

You have encoding problem with your sourcecode file. It is maybe ISO-8859-1 encoded, but the compiler was set to use UTF-8. This will results in errors when using characters, which will not have the same bytes representation in UTF-8 and ISO-8859-1. This will happen to all characters which are not part of ASCII, for example ¬ NOT SIGN.

You can simulate this with the following program. It just uses your line of source code and generates a ISO-8859-1 byte array and decode this "wrong" with UTF-8 encoding. You can see at which position the line gets corrupted. I added 2 spaces at your source code to fit position 74 to fit this to ¬ NOT SIGN, which is the only character, which will generate different bytes in ISO-8859-1 encoding and UTF-8 encoding. I guess this will match indentation with the real source file.

 String reg = "      String reg = \"^(?=.*[0-9])(?=.*[a-z])(?=.*[A-Z])(?=.*[~#;:?/@&!\"'%*=¬.,-])(?=[^\\s]+$).{8,24}$\";";
 String corrupt=new String(reg.getBytes("ISO-8859-1"),"UTF-8");
 System.out.println(corrupt+": "+corrupt.charAt(74));
 System.out.println(reg+": "+reg.charAt(74));     

which results in the following output (messed up because of markup):

String reg = "^(?=.[0-9])(?=.[a-z])(?=.[A-Z])(?=.[~#;:?/@&!"'%*=?.,-])(?=[^\s]+$).{8,24}$";: ?

String reg = "^(?=.[0-9])(?=.[a-z])(?=.[A-Z])(?=.[~#;:?/@&!"'%*=¬.,-])(?=[^\s]+$).{8,24}$";: ¬

See "live" at https://ideone.com/ShZnB

To fix this, save the source files with UTF-8 encoding.

You can use $GLOBALS to solve this issue as well.

$myvar = "Hey";

include ("test.php");


echo $GLOBALS["myvar"];

If you can't use an HTML parser oriented solution to filter out the tags, here's a simple regex for it.

string noHTML = Regex.Replace(inputHTML, @"<[^>]+>|&nbsp;", "").Trim();

You should ideally make another pass through a regex filter that takes care of multiple spaces as

string noHTMLNormalised = Regex.Replace(noHTML, @"\s{2,}", " ");

16 July 2020 - Kotlin Answer

1. First, call Fragment Manager.
2. After, to use onBackPressed() method.

Coding in Android Studio 4.0 with Kotlin:

fragmentManager?.popBackStack()

Happy coding!

@canerkaseler

Here's my C code for resolving a collision between a sphere and a non-axis aligned box. It relies on a couple of my own library routines, but it may prove useful to some. I'm using it in a game and it works perfectly.

float physicsProcessCollisionBetweenSelfAndActorRect(SPhysics *self, SPhysics *actor)
{
    float diff = 99999;

    SVector relative_position_of_circle = getDifference2DBetweenVectors(&self->worldPosition, &actor->worldPosition);
    rotateVector2DBy(&relative_position_of_circle, -actor->axis.angleZ); // This aligns the coord system so the rect becomes an AABB

    float x_clamped_within_rectangle = relative_position_of_circle.x;
    float y_clamped_within_rectangle = relative_position_of_circle.y;
    LIMIT(x_clamped_within_rectangle, actor->physicsRect.l, actor->physicsRect.r);
    LIMIT(y_clamped_within_rectangle, actor->physicsRect.b, actor->physicsRect.t);

    // Calculate the distance between the circle's center and this closest point
    float distance_to_nearest_edge_x = relative_position_of_circle.x - x_clamped_within_rectangle;
    float distance_to_nearest_edge_y = relative_position_of_circle.y - y_clamped_within_rectangle;

    // If the distance is less than the circle's radius, an intersection occurs
    float distance_sq_x = SQUARE(distance_to_nearest_edge_x);
    float distance_sq_y = SQUARE(distance_to_nearest_edge_y);
    float radius_sq = SQUARE(self->physicsRadius);
    if(distance_sq_x + distance_sq_y < radius_sq)   
    {
        float half_rect_w = (actor->physicsRect.r - actor->physicsRect.l) * 0.5f;
        float half_rect_h = (actor->physicsRect.t - actor->physicsRect.b) * 0.5f;

        CREATE_VECTOR(push_vector);         

        // If we're at one of the corners of this object, treat this as a circular/circular collision
        if(fabs(relative_position_of_circle.x) > half_rect_w && fabs(relative_position_of_circle.y) > half_rect_h)
        {
            SVector edges;
            if(relative_position_of_circle.x > 0) edges.x = half_rect_w; else edges.x = -half_rect_w;
            if(relative_position_of_circle.y > 0) edges.y = half_rect_h; else edges.y = -half_rect_h;   

            push_vector = relative_position_of_circle;
            moveVectorByInverseVector2D(&push_vector, &edges);

            // We now have the vector from the corner of the rect to the point.
            float delta_length = getVector2DMagnitude(&push_vector);
            float diff = self->physicsRadius - delta_length; // Find out how far away we are from our ideal distance

            // Normalise the vector
            push_vector.x /= delta_length;
            push_vector.y /= delta_length;
            scaleVector2DBy(&push_vector, diff); // Now multiply it by the difference
            push_vector.z = 0;
        }
        else // Nope - just bouncing against one of the edges
        {
            if(relative_position_of_circle.x > 0) // Ball is to the right
                push_vector.x = (half_rect_w + self->physicsRadius) - relative_position_of_circle.x;
            else
                push_vector.x = -((half_rect_w + self->physicsRadius) + relative_position_of_circle.x);

            if(relative_position_of_circle.y > 0) // Ball is above
                push_vector.y = (half_rect_h + self->physicsRadius) - relative_position_of_circle.y;
            else
                push_vector.y = -((half_rect_h + self->physicsRadius) + relative_position_of_circle.y);

            if(fabs(push_vector.x) < fabs(push_vector.y))
                push_vector.y = 0;
            else
                push_vector.x = 0;
        }

        diff = 0; // Cheat, since we don't do anything with the value anyway
        rotateVector2DBy(&push_vector, actor->axis.angleZ);
        SVector *from = &self->worldPosition;       
        moveVectorBy2D(from, push_vector.x, push_vector.y);
    }   
    return diff;
}

You can change the port in the console by running the following on Windows:

SET PORT=8000

For Mac, Linux or Windows WSL use the following:

export PORT=8000

The export sets the environment variable for the current shell and all child processes like npm that might use it.

If you want the environment variable to be set just for the npm process, precede the command with the environment variable like this (on Mac and Linux and Windows WSL):

PORT=8000 npm run start

With me, in the project directory run the following commands.

For react native old version (you will see index.android.js in root):

mkdir -p android/app/src/main/assets && rm -rf android/app/build && react-native bundle --platform android --dev false --entry-file index.android.js --bundle-output android/app/src/main/assets/index.android.bundle --assets-dest android/app/src/main/res && cd android && ./gradlew clean assembleRelease && cd ../

For react native new version (you just see index.js in root):

mkdir -p android/app/src/main/assets && rm -rf android/app/build && react-native bundle --platform android --dev false --entry-file index.js --bundle-output android/app/src/main/assets/index.android.bundle --assets-dest android/app/src/main/res && cd android && ./gradlew clean assembleRelease && cd ../

The apk file will be generated at:

• Gradle < 3.0: android/app/build/outputs/apk/
• Gradle 3.0+: android/app/build/outputs/apk/release/

My team would stumble upon this issue every now and then in random machines that we would try to install our platform in (we use oracle drivers 12c ver 12.2.0.4 but we came across this bug with other versions as well)

After quite a bit of experimentation we realized what was wrong:

Said machines would have apps that were using the machine-wide oracle drivers silently locking them and preventing the oracle driver-installer from working its magic when would attempt to upgrade/reinstall said oracle-drivers. The sneakiest "app" would be websites running in IIS and the like because these apps essentially auto-start on reboot. To counter this we do the following:

1. Disable IIS from starting automagically on restart. Do the same for any other apps/services that auto-start themselves on reboot.
2. Uninstall any previous Oracle driver and double-check that there are no traces left behind in registry or folders.
3. Reboot the machine
4. (Re)Install the Oracle drivers and re-enable IIS and other auto-start apps.
5. Reboot the machine <- This is vital. Oracle's OLE DB drivers won't work unless you reboot the machine.

If this doesn't work then rinse repeat until the OLE DB drivers work. Hope this helps someone out there struggling to figure out what's going on.

You can use numpy.logical_not to invert the boolean array returned by isin:

In [63]: s = pd.Series(np.arange(10.0))

In [64]: x = range(4, 8)

In [65]: mask = np.logical_not(s.isin(x))

In [66]: s[mask]
Out[66]: 
0    0
1    1
2    2
3    3
8    8
9    9

As given in the comment by Wes McKinney you can also use

s[~s.isin(x)]

I was wondering how to do this myself; it seems Gmail has since silently implemented this feature. I created the following filter:

Matches: subject:([test])
Do this: Skip Inbox

And then I sent a message with the subject

[test] foo

And the message was archived! So it seems all that is necessary is to create a filter for the subject prefix you wish to handle.

This is a repackaging of the accepted answer - but in a way that lets you compare them all to each other for yourself - the top 3 algorithms are compared (and comments explain why other methods are excluded) and you can run against your own setup to see how they each perform with the size of sequence that you desire.

SET NOCOUNT ON;

--
-- Set the count of numbers that you want in your sequence ...
--
DECLARE @NumberOfNumbers int = 10000000;
--
--  Some notes on choosing a useful length for your sequence ...
--      For a sequence of  100 numbers -- winner depends on preference of min/max/avg runtime ... (I prefer PhilKelley algo here - edit the algo so RowSet2 is max RowSet CTE)
--      For a sequence of   1k numbers -- winner depends on preference of min/max/avg runtime ... (Sadly PhilKelley algo is generally lowest ranked in this bucket, but could be tweaked to perform better)
--      For a sequence of  10k numbers -- a clear winner emerges for this bucket
--      For a sequence of 100k numbers -- do not test any looping methods at this size or above ...
--                                        the previous winner fails, a different method is need to guarantee the full sequence desired
--      For a sequence of  1MM numbers -- the statistics aren't changing much between the algorithms - choose one based on your own goals or tweaks
--      For a sequence of 10MM numbers -- only one of the methods yields the desired sequence, and the numbers are much closer than for smaller sequences

DECLARE @TestIteration int = 0;
DECLARE @MaxIterations int = 10;
DECLARE @MethodName varchar(128);

-- SQL SERVER 2017 Syntax/Support needed
DROP TABLE IF EXISTS #TimingTest
CREATE TABLE #TimingTest (MethodName varchar(128), TestIteration int, StartDate DateTime2, EndDate DateTime2, ElapsedTime decimal(38,0), ItemCount decimal(38,0), MaxNumber decimal(38,0), MinNumber decimal(38,0))

--
--  Conduct the test ...
--
WHILE @TestIteration < @MaxIterations
BEGIN
    -- Be sure that the test moves forward
    SET @TestIteration += 1;

/*  -- This method has been removed, as it is BY FAR, the slowest method
    -- This test shows that, looping should be avoided, likely at all costs, if one places a value / premium on speed of execution ...

    --
    -- METHOD - Fast looping
    --

    -- Prep for the test
    DROP TABLE IF EXISTS [Numbers].[Test];
    CREATE TABLE [Numbers].[Test] (Number INT NOT NULL);

    -- Method information
    SET @MethodName = 'FastLoop';

    -- Record the start of the test
    INSERT INTO #TimingTest(MethodName, TestIteration, StartDate)
    SELECT @MethodName, @TestIteration, GETDATE()

    -- Run the algorithm
    DECLARE @i INT = 1;
    WHILE @i <= @NumberOfNumbers
    BEGIN
        INSERT INTO [Numbers].[Test](Number) VALUES (@i);
        SELECT @i = @i + 1;
    END;

    ALTER TABLE [Numbers].[Test] ADD CONSTRAINT PK_Numbers_Test_Number PRIMARY KEY CLUSTERED (Number)

    -- Record the end of the test
    UPDATE tt
        SET 
            EndDate = GETDATE()
    FROM #TimingTest tt
    WHERE tt.MethodName = @MethodName
    and tt.TestIteration = @TestIteration

    -- And the stats about the numbers in the sequence
    UPDATE tt
        SET 
            ItemCount = results.ItemCount,
            MaxNumber = results.MaxNumber,
            MinNumber = results.MinNumber
    FROM #TimingTest tt
    CROSS JOIN (
        SELECT COUNT(Number) as ItemCount, MAX(Number) as MaxNumber, MIN(Number) as MinNumber FROM [Numbers].[Test]
    ) results
    WHERE tt.MethodName = @MethodName
    and tt.TestIteration = @TestIteration
*/

/*  -- This method requires GO statements, which would break the script, also - this answer does not appear to be the fastest *AND* seems to perform "magic"
    --
    -- METHOD - "Semi-Looping"
    --

    -- Prep for the test
    DROP TABLE IF EXISTS [Numbers].[Test];
    CREATE TABLE [Numbers].[Test] (Number INT NOT NULL);

    -- Method information
    SET @MethodName = 'SemiLoop';

    -- Record the start of the test
    INSERT INTO #TimingTest(MethodName, TestIteration, StartDate)
    SELECT @MethodName, @TestIteration, GETDATE()

    -- Run the algorithm 
    INSERT [Numbers].[Test] values (1);
--    GO --required

    INSERT [Numbers].[Test] SELECT Number + (SELECT COUNT(*) FROM [Numbers].[Test]) FROM [Numbers].[Test]
--    GO 14 --will create 16384 total rows

    ALTER TABLE [Numbers].[Test] ADD CONSTRAINT PK_Numbers_Test_Number PRIMARY KEY CLUSTERED (Number)

    -- Record the end of the test
    UPDATE tt
        SET 
            EndDate = GETDATE()
    FROM #TimingTest tt
    WHERE tt.MethodName = @MethodName
    and tt.TestIteration = @TestIteration

    -- And the stats about the numbers in the sequence
    UPDATE tt
        SET 
            ItemCount = results.ItemCount,
            MaxNumber = results.MaxNumber,
            MinNumber = results.MinNumber
    FROM #TimingTest tt
    CROSS JOIN (
        SELECT COUNT(Number) as ItemCount, MAX(Number) as MaxNumber, MIN(Number) as MinNumber FROM [Numbers].[Test]
    ) results
    WHERE tt.MethodName = @MethodName
    and tt.TestIteration = @TestIteration
*/
    --
    -- METHOD - Philip Kelley's algo 
    --          (needs tweaking to match the desired length of sequence in order to optimize its performance, relies more on the coder to properly tweak the algorithm)
    --

    -- Prep for the test
    DROP TABLE IF EXISTS [Numbers].[Test];
    CREATE TABLE [Numbers].[Test] (Number INT NOT NULL);

    -- Method information
    SET @MethodName = 'PhilKelley';

    -- Record the start of the test
    INSERT INTO #TimingTest(MethodName, TestIteration, StartDate)
    SELECT @MethodName, @TestIteration, GETDATE()

    -- Run the algorithm
    ; WITH
    RowSet0 as (select 1 as Item union all select 1),              --          2 rows   -- We only have to name the column in the first select, the second/union select inherits the column name
    RowSet1 as (select 1 as Item from RowSet0 as A, RowSet0 as B), --          4 rows
    RowSet2 as (select 1 as Item from RowSet1 as A, RowSet1 as B), --         16 rows
    RowSet3 as (select 1 as Item from RowSet2 as A, RowSet2 as B), --        256 rows
    RowSet4 as (select 1 as Item from RowSet3 as A, RowSet3 as B), --      65536 rows (65k)
    RowSet5 as (select 1 as Item from RowSet4 as A, RowSet4 as B), -- 4294967296 rows (4BB)
    -- Add more RowSetX to get higher and higher numbers of rows    
    -- Each successive RowSetX results in squaring the previously available number of rows
    Tally   as (select row_number() over (order by Item) as Number from RowSet5) -- This is what gives us the sequence of integers, always select from the terminal CTE expression
    -- Note: testing of this specific use case has shown that making Tally as a sub-query instead of a terminal CTE expression is slower (always) - be sure to follow this pattern closely for max performance
    INSERT INTO [Numbers].[Test] (Number)
    SELECT o.Number
    FROM Tally o
    WHERE o.Number <= @NumberOfNumbers

    ALTER TABLE [Numbers].[Test] ADD CONSTRAINT PK_Numbers_Test_Number PRIMARY KEY CLUSTERED (Number)

    -- Record the end of the test
    UPDATE tt
        SET 
            EndDate = GETDATE()
    FROM #TimingTest tt
    WHERE tt.MethodName = @MethodName
    and tt.TestIteration = @TestIteration

    -- And the stats about the numbers in the sequence
    UPDATE tt
        SET 
            ItemCount = results.ItemCount,
            MaxNumber = results.MaxNumber,
            MinNumber = results.MinNumber
    FROM #TimingTest tt
    CROSS JOIN (
        SELECT COUNT(Number) as ItemCount, MAX(Number) as MaxNumber, MIN(Number) as MinNumber FROM [Numbers].[Test]
    ) results
    WHERE tt.MethodName = @MethodName
    and tt.TestIteration = @TestIteration

    --
    -- METHOD - Mladen Prajdic answer
    --

    -- Prep for the test
    DROP TABLE IF EXISTS [Numbers].[Test];
    CREATE TABLE [Numbers].[Test] (Number INT NOT NULL);

    -- Method information
    SET @MethodName = 'MladenPrajdic';

    -- Record the start of the test
    INSERT INTO #TimingTest(MethodName, TestIteration, StartDate)
    SELECT @MethodName, @TestIteration, GETDATE()

    -- Run the algorithm
    INSERT INTO [Numbers].[Test](Number)
    SELECT TOP (@NumberOfNumbers) row_number() over(order by t1.number) as N
    FROM master..spt_values t1 
    CROSS JOIN master..spt_values t2

    ALTER TABLE [Numbers].[Test] ADD CONSTRAINT PK_Numbers_Test_Number PRIMARY KEY CLUSTERED (Number)

    -- Record the end of the test
    UPDATE tt
        SET 
            EndDate = GETDATE()
    FROM #TimingTest tt
    WHERE tt.MethodName = @MethodName
    and tt.TestIteration = @TestIteration

    -- And the stats about the numbers in the sequence
    UPDATE tt
        SET 
            ItemCount = results.ItemCount,
            MaxNumber = results.MaxNumber,
            MinNumber = results.MinNumber
    FROM #TimingTest tt
    CROSS JOIN (
        SELECT COUNT(Number) as ItemCount, MAX(Number) as MaxNumber, MIN(Number) as MinNumber FROM [Numbers].[Test]
    ) results
    WHERE tt.MethodName = @MethodName
    and tt.TestIteration = @TestIteration

    --
    -- METHOD - Single INSERT
    -- 

    -- Prep for the test
    DROP TABLE IF EXISTS [Numbers].[Test];
    -- The Table creation is part of this algorithm ...

    -- Method information
    SET @MethodName = 'SingleInsert';

    -- Record the start of the test
    INSERT INTO #TimingTest(MethodName, TestIteration, StartDate)
    SELECT @MethodName, @TestIteration, GETDATE()

    -- Run the algorithm
    SELECT TOP (@NumberOfNumbers) IDENTITY(int,1,1) AS Number
    INTO [Numbers].[Test]
    FROM sys.objects s1       -- use sys.columns if you don't get enough rows returned to generate all the numbers you need
    CROSS JOIN sys.objects s2 -- use sys.columns if you don't get enough rows returned to generate all the numbers you need

    ALTER TABLE [Numbers].[Test] ADD CONSTRAINT PK_Numbers_Test_Number PRIMARY KEY CLUSTERED (Number)

    -- Record the end of the test
    UPDATE tt
        SET 
            EndDate = GETDATE()
    FROM #TimingTest tt
    WHERE tt.MethodName = @MethodName
    and tt.TestIteration = @TestIteration

    -- And the stats about the numbers in the sequence
    UPDATE tt
        SET 
            ItemCount = results.ItemCount,
            MaxNumber = results.MaxNumber,
            MinNumber = results.MinNumber
    FROM #TimingTest tt
    CROSS JOIN (
        SELECT COUNT(Number) as ItemCount, MAX(Number) as MaxNumber, MIN(Number) as MinNumber FROM [Numbers].[Test]
    ) results
    WHERE tt.MethodName = @MethodName
    and tt.TestIteration = @TestIteration
END

-- Calculate the timespan for each of the runs
UPDATE tt
    SET
        ElapsedTime = DATEDIFF(MICROSECOND, StartDate, EndDate)
FROM #TimingTest tt

--
-- Report the results ...
--
SELECT 
    MethodName, AVG(ElapsedTime) / AVG(ItemCount) as TimePerRecord, CAST(AVG(ItemCount) as bigint) as SequenceLength,
    MAX(ElapsedTime) as MaxTime, MIN(ElapsedTime) as MinTime,
    MAX(MaxNumber) as MaxNumber, MIN(MinNumber) as MinNumber
FROM #TimingTest tt
GROUP by tt.MethodName
ORDER BY TimePerRecord ASC, MaxTime ASC, MinTime ASC

I haven't hit against this problem myself, but I'd spawn a thread at program start which immediately tries to generate a seed, then dies. The method which you call for randoms will join to that thread if it is alive so the first call only blocks if it occurs very early in program execution.

Multiple box shadows did it for me.

box-shadow:
        inset 0 -8px 4px 4px rgb(255,255,255),
        inset 0 2px 4px 0px rgba(50, 50, 50, 0.75);

http://jsfiddle.net/kk66f/

Add the following to your Gemfile

ruby '2.3.0'

As the docs say, this can be achieved just by using set instead if push.

As the docs say, it is not recommended (due to possible overwrite by other user at the "same" time).

But in some cases it's helpful to have control over the feed's content including keys.

As an example of webapp in js, 193 being your id generated elsewhere, simply:

 firebase.initializeApp(firebaseConfig);
  var data={
      "name":"Prague"
  };
  firebase.database().ref().child('areas').child("193").set(data);

This will overwrite any area labeled 193 or create one if it's not existing yet.

When using SQLFiddle, make sure that the separator is set to GO. Also the schema build script is executed in a different connection from the run script, so a temp table created in the one is not visible in the other. This fiddle shows that your code is valid and working in SQL 2012:

SQL Fiddle

MS SQL Server 2012 Schema Setup:

Query 1:

CREATE TABLE #Names
  ( 
    Name1 VARCHAR(100),
    Name2 VARCHAR(100)
  ) 

INSERT INTO #Names
  (Name1, Name2)
VALUES
  ('Matt', 'Matthew'),
  ('Matt', 'Marshal'),
  ('Matt', 'Mattison')

SELECT * FROM #NAMES

Results:

| NAME1 |    NAME2 |
--------------------
|  Matt |  Matthew |
|  Matt |  Marshal |
|  Matt | Mattison |

Here a SSMS 2012 screenshot:

Yes You can either set [disabled]= "true" or if it is an radio button or checkbox then you can simply use disable

For radio button:

<md-radio-button disabled>Select color</md-radio-button>

For dropdown:

<ng-select (selected)="someFunction($event)" [disabled]="true"></ng-select>

Windows doesn't ignore anything. This is an issue with your setup; Windows just uses what you provide. It has no special knowledge of JAVA_HOME.

CLASSPATH has nothing to do with Windows, either. To Windows it's only an environmental variable that gets expanded to a folder location.

Check your %PATH% environmental variable. It's what's making Windows find one before the other. The path (as the post you linked to said) should point to %JAVA_HOME%\bin;<remainder of path>. Again, the post you linked to gave you a way to set this using a batch file.

(For others who might not know this: The easiest way to inspect the %PATH% is to open a command prompt and type echo %PATH%. You can also get there by right-clicking on Computer in the right pane of the Start Menu and choosing Properties, then Advanced System Settings, and the tne Environmental Variables button.)

A connection timeout occurs only upon starting the TCP connection. This usually happens if the remote machine does not answer. This means that the server has been shut down, you used the wrong IP/DNS name, wrong port or the network connection to the server is down.

A socket timeout is dedicated to monitor the continuous incoming data flow. If the data flow is interrupted for the specified timeout the connection is regarded as stalled/broken. Of course this only works with connections where data is received all the time.

By setting socket timeout to 1 this would require that every millisecond new data is received (assuming that you read the data block wise and the block is large enough)!

If only the incoming stream stalls for more than a millisecond you are running into a timeout.

Whatever Node.js version you have installed, run its installer again. It asks you to remove Node.js like this:

Based off of @Mike Sherrill Cat Recall's answer, this is what worked for me:

ALTER TABLE "Children"
DROP CONSTRAINT "Children_parentId_fkey",
ADD CONSTRAINT "Children_parentId_fkey"
  FOREIGN KEY ("parentId")
  REFERENCES "Parent"(id)
  ON DELETE CASCADE;

You can define first the width of the element as 0, floating right, and then on the event that you are about to show it.. it would be like

$('#the_element_to_slide_from_right_left').animate({ width:'your desired width' }, 600);

Simple as that.

In the same vein as martineau's response, the best solution is often not to check. For example, the code

if x in d:
    foo = d[x]
else:
    foo = bar

is normally written

foo = d.get(x, bar)

which is shorter and more directly speaks to what you mean.

Another common case is something like

if x not in d:
    d[x] = []

d[x].append(foo)

which can be rewritten

d.setdefault(x, []).append(foo)

or rewritten even better by using a collections.defaultdict(list) for d and writing

d[x].append(foo)

I had the same problem. Change the CurrentBuilder in Properties/C/C++ Build/ToolChainEditor to another value and apply it. Then again change it the original value. It works.

You don't need to convert your dates to timestamp before the sorting, but it's a good idea though because it will take more time to sort without it.

$data = array(
    array(
        "title" => "Another title",
        "date"  => "Fri, 17 Jun 2011 08:55:57 +0200"
    ),
    array(
        "title" => "My title",
        "date"  => "Mon, 16 Jun 2010 06:55:57 +0200"
    )
);

function sortFunction( $a, $b ) {
    return strtotime($a["date"]) - strtotime($b["date"]);
}
usort($data, "sortFunction");
var_dump($data);

The accepted answer only shows files in the current directory's tree. To show all of the tracked files that have been committed (on the current branch), use

git ls-tree --full-tree --name-only -r HEAD

• --full-tree makes the command run as if you were in the repo's root directory.
• -r recurses into subdirectories. Combined with --full-tree, this gives you all committed, tracked files.
• --name-only removes SHA / permission info for when you just want the file paths.
• HEAD specifies which branch you want the list of tracked, committed files for. You could change this to master or any other branch name, but HEAD is the commit you have checked out right now.

This is the method from the accepted answer to the ~duplicate question https://stackoverflow.com/a/8533413/4880003.

Decompyle++ (pycdc) appears to work for a range of python versions: https://github.com/zrax/pycdc

For example:

git clone https://github.com/zrax/pycdc   
cd pycdc
make  
./bin/pycdc Example.pyc > Example.py

The simplest way is using libraries like google-http-java-client but if you want parse the JSON response by yourself you can do that in a multiple ways, you can use org.json, json-simple, Gson, minimal-json, jackson-mapper-asl (from 1.x)... etc

A set of simple examples:

Using Gson:

import java.io.IOException;

import org.apache.http.HttpResponse;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.CloseableHttpClient;
import org.apache.http.impl.client.HttpClientBuilder;
import org.apache.http.util.EntityUtils;

public class Gson {

    public static void main(String[] args) {
    }

    public HttpResponse http(String url, String body) {

        try (CloseableHttpClient httpClient = HttpClientBuilder.create().build()) {
            HttpPost request = new HttpPost(url);
            StringEntity params = new StringEntity(body);
            request.addHeader("content-type", "application/json");
            request.setEntity(params);
            HttpResponse result = httpClient.execute(request);
            String json = EntityUtils.toString(result.getEntity(), "UTF-8");

            com.google.gson.Gson gson = new com.google.gson.Gson();
            Response respuesta = gson.fromJson(json, Response.class);

            System.out.println(respuesta.getExample());
            System.out.println(respuesta.getFr());

        } catch (IOException ex) {
        }
        return null;
    }

    public class Response{

        private String example;
        private String fr;

        public String getExample() {
            return example;
        }
        public void setExample(String example) {
            this.example = example;
        }
        public String getFr() {
            return fr;
        }
        public void setFr(String fr) {
            this.fr = fr;
        }
    }
}

Using json-simple:

import java.io.IOException;

import org.apache.http.HttpResponse;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.entity.StringEntity;
import org.apache.http.impl.client.CloseableHttpClient;
import org.apache.http.impl.client.HttpClientBuilder;
import org.apache.http.util.EntityUtils;
import org.json.simple.JSONArray;
import org.json.simple.JSONObject;
import org.json.simple.parser.JSONParser;

public class JsonSimple {

    public static void main(String[] args) {

    }

    public HttpResponse http(String url, String body) {

        try (CloseableHttpClient httpClient = HttpClientBuilder.create().build()) {
            HttpPost request = new HttpPost(url);
            StringEntity params = new StringEntity(body);
            request.addHeader("content-type", "application/json");
            request.setEntity(params);
            HttpResponse result = httpClient.execute(request);

            String json = EntityUtils.toString(result.getEntity(), "UTF-8");
            try {
                JSONParser parser = new JSONParser();
                Object resultObject = parser.parse(json);

                if (resultObject instanceof JSONArray) {
                    JSONArray array=(JSONArray)resultObject;
                    for (Object object : array) {
                        JSONObject obj =(JSONObject)object;
                        System.out.println(obj.get("example"));
                        System.out.println(obj.get("fr"));
                    }

                }else if (resultObject instanceof JSONObject) {
                    JSONObject obj =(JSONObject)resultObject;
                    System.out.println(obj.get("example"));
                    System.out.println(obj.get("fr"));
                }

            } catch (Exception e) {
                // TODO: handle exception
            }

        } catch (IOException ex) {
        }
        return null;
    }
}

etc...

Load data into a table in MySQL and specify columns:

LOAD DATA LOCAL INFILE 'file.csv' INTO TABLE t1 
FIELDS TERMINATED BY ',' LINES TERMINATED BY '\n'  
(@col1,@col2,@col3,@col4) set name=@col4,id=@col2 ;

@col1,2,3,4 are variables to hold the csv file columns (assume 4 ) name,id are table columns.

It looks like the return value is in an array? That's somewhat strange... and also be aware that certain browsers will allow that to be parsed from a cross-domain request (which isn't true when you have a top-level JSON object).

Anyway, if that is an array wrapper, you'll want something like this:

$('#my-hidden-field').val(theObject[0].id);

You can later retrieve it through a simple .val() call on the same field. This honestly looks kind of strange though. The hidden field won't persist across page requests, so why don't you just keep it in your own (pseudo-namespaced) value bucket? E.g.,

$MyNamespace = $MyNamespace || {};
$MyNamespace.myKey = theObject;

This will make it available to you from anywhere, without any hacky input field management. It's also a lot more efficient than doing DOM modification for simple value storage.

This is not quite a singleton, but may be something that could fix your problem.

public class KamilManager {

  private static KamilManager sharedInstance;

  /**
   * This method cannot be called before calling KamilManager constructor or else
   * it will bomb out.
   * @return
   */
  public static KamilManager getInstanceAfterInitialized() {
    if(sharedInstance == null)
        throw new RuntimeException("You must instantiate KamilManager once, before calling this method");

    return sharedInstance;
}

  public KamilManager(Context context, KamilConfig KamilConfig) {
    //Set whatever you need to set here then call:
  s  haredInstance = this;
  }
}

Just be careful. You will get this message if you try to enter a command that doesn't exist like this

/usr/bin/java -v

For those who will find this thread like me, here is IMO better solution (note the 70% which sets min width of the dialog in percent of screen width):

<style name="my_dialog" parent="Theme.AppCompat.Dialog.Alert">
    <item name="windowMinWidthMajor">70%</item>
    <item name="windowMinWidthMinor">70%</item>
</style>

And then apply this style to dialog:

AlertDialog.Builder builder = new AlertDialog.Builder(context, R.style.my_dialog);

In Spring, there is a rigorous way to convert a long to int

not only lnog can convert into int,any type of class extends Number can convert to other Number type in general,here I will show you how to convert a long to int,other type vice versa.

Long l = 1234567L;
int i = org.springframework.util.NumberUtils.convertNumberToTargetClass(l, Integer.class);

#include <iostream>
std::cout << someString << "\n";

or

printf("%s\n",someString.c_str());

On Angular 6, I access parent properties by injecting the parent via constructor. Not the best solution but it works:

 constructor(@Optional() public parentComponentInjectionObject: ParentComponent){
    // And access like this:
    parentComponentInjectionObject.thePropertyYouWantToAccess;
}

There are a lot of sources for selenium - here is good one for simple use Selenium, and here is a example snippet too Selenium Examples

You can find a lot of good sources to use selenium, it's not too hard to get it set up and start using it.

document.body.onload is a cross-browser, but a legacy mechanism that only allows a single callback (you cannot assign multiple functions to it).

The closest "standard" alternative, addEventListener is not supported by Internet Explorer (it uses attachEvent), so you will likely want to use a library (jQuery, MooTools, prototype.js, etc.) to abstract the cross-browser ugliness for you.

Read about Storage Engines.

MyISAM:

The MyISAM storage engine in MySQL.

• Simpler to design and create, thus better for beginners. No worries about the foreign relationships between tables.
• Faster than InnoDB on the whole as a result of the simpler structure thus much less costs of server resources. -- Mostly no longer true.
• Full-text indexing. -- InnoDB has it now
• Especially good for read-intensive (select) tables. -- Mostly no longer true.
• Disk footprint is 2x-3x less than InnoDB's. -- As of Version 5.7, this is perhaps the only real advantage of MyISAM.

InnoDB:

The InnoDB storage engine in MySQL.

• Support for transactions (giving you support for the ACID property).
• Row-level locking. Having a more fine grained locking-mechanism gives you higher concurrency compared to, for instance, MyISAM.
• Foreign key constraints. Allowing you to let the database ensure the integrity of the state of the database, and the relationships between tables.
• InnoDB is more resistant to table corruption than MyISAM.
• Support for large buffer pool for both data and indexes. MyISAM key buffer is only for indexes.
• MyISAM is stagnant; all future enhancements will be in InnoDB. This was made abundantly clear with the roll out of Version 8.0.

MyISAM Limitations:

• No foreign keys and cascading deletes/updates
• No transactional integrity (ACID compliance)
• No rollback abilities
• 4,284,867,296 row limit (2^32) -- This is old default. The configurable limit (for many versions) has been 2**56 bytes.
• Maximum of 64 indexes per table

InnoDB Limitations:

• No full text indexing (Below-5.6 mysql version)
• Cannot be compressed for fast, read-only (5.5.14 introduced ROW_FORMAT=COMPRESSED)
• You cannot repair an InnoDB table

For brief understanding read below links:

1. MySQL Engines: InnoDB vs. MyISAM – A Comparison of Pros and Cons
2. MySQL Engines: MyISAM vs. InnoDB
3. What are the main differences between InnoDB and MyISAM?
4. MyISAM versus InnoDB
5. What's the difference between MyISAM and InnoDB?
6. MySql: MyISAM vs. Inno DB!

Ctrl + MouseWheel on active editor.

Normally you cant update a page from a servlet. Client (browser) has to request an update. Eiter client loads a whole new page or it requests an update to a part of an existing page. This technique is called Ajax.

I have a field named IsActive in table rows that's True when an item has been deleted. This code applies a CSS class named strikethrough only to deleted items. You can see how it uses the C# Ternary Operator:

<tr class="@(@businesstypes.IsActive ? "" : "strikethrough")">

Old post but worth a look for someone who stumbles upon like me

ISNULL(NULLIF(ColumnName, ' '), NULL) IS NOT NULL

ISNULL(NULLIF(ColumnName, ' '), NULL) IS NULL

Put style="float:left" on each of your divs:

<div style="float:left;">...........

Example:

<div style="float:left;">
  <label for="username">First Name</label>
  <input id="user_first_name" name="user[first_name]" size="30" type="text" />
</div>

<div style="float:left;">
  <label for="name">Last Name</label>
  <input id="user_last_name" name="user[last_name]" size="30" type="text" />
</div>

To put an element on new line, put this div below it:

<div style="clear:both;">&nbsp;</div>

Of course, you can also create classes in the CSS file:

.left{
  float:left;
}

.clear{
  clear:both;
}

And then your html should look like this:

<div class="left">
  <label for="username">First Name</label>
  <input id="user_first_name" name="user[first_name]" size="30" type="text" />
</div>

<div class="left">
  <label for="name">Last Name</label>
  <input id="user_last_name" name="user[last_name]" size="30" type="text" />
</div>

To put an element on new line, put this div below it:

<div class="clear">&nbsp;</div>

More Info:

• CSS Float Clear Tutorial

C#: try this

• yyyy(yy/yyy) - years
• MM - months(like '03'), MMMM - months(like 'March')
• dd - days(like 09), ddd/dddd - days(Sun/Sunday)
• hh - hour 12(AM/PM), HH - hour 24
• mm - minute
• ss - second

Use some delimeter,like this:

1. MessageBox.Show(DateValue.ToString("yyyy-MM-dd")); example result: "2014-09-30"
2. empty format string: MessageBox.Show(DateValue.ToString()); example result: "30.09.2014 0:00:00"

hi If you are still not able to make column as AUTO_INCREMENT while creating table. As a work around first create table that is:

create table student( sid integer NOT NULL sname varchar(30), PRIMARY KEY (sid) );

and then explicitly try to alter column bu using the following

alter table student alter column sid set GENERATED BY DEFAULT AS IDENTITY

Or

alter table student alter column sid set GENERATED BY DEFAULT AS IDENTITY (start with 100)

I think a version of the algorithm in R is still missing:

gpsdistance<-function(lat1,lon1,lat2,lon2){

# internal function to change deg to rad

degreesToRadians<- function (degrees) {
return (degrees * pi / 180)
}

R<-6371e3  #radius of Earth in meters

phi1<-degreesToRadians(lat1) # latitude 1
phi2<-degreesToRadians(lat2) # latitude 2
lambda1<-degreesToRadians(lon1) # longitude 1
lambda2<-degreesToRadians(lon2) # longitude 2

delta_phi<-phi1-phi2 # latitude-distance
delta_lambda<-lambda1-lambda2 # longitude-distance

a<-sin(delta_phi/2)*sin(delta_phi/2)+
cos(phi1)*cos(phi2)*sin(delta_lambda/2)*
sin(delta_lambda/2)

cc<-2*atan2(sqrt(a),sqrt(1-a))

distance<- R * cc

return(distance)  # in meters
}

solution :

 public Response Get(string jsonData) {
     var json = JsonConvert.DeserializeObject<modelname>(jsonData);
     var data = StoredProcedure.procedureName(json.Parameter, json.Parameter, json.Parameter, json.Parameter);
     return data;
 }

model:

 public class modelname {
     public long parameter{ get; set; }
     public int parameter{ get; set; }
     public int parameter{ get; set; }
     public string parameter{ get; set; }
 }

All the answers here use JSON objects. This gave us problems with the $this->input->post() methods of our Codeigniter controllers. The CI_Controller cannot read JSON directly. We used this method to do it WITHOUT JSON

func postRequest() {
    // Create url object
    guard let url = URL(string: yourURL) else {return}

    // Create the session object
    let session = URLSession.shared

    // Create the URLRequest object using the url object
    var request = URLRequest(url: url)

    // Set the request method. Important Do not set any other headers, like Content-Type
    request.httpMethod = "POST" //set http method as POST

    // Set parameters here. Replace with your own.
    let postData = "param1_id=param1_value&param2_id=param2_value".data(using: .utf8)
    request.httpBody = postData

    // Create a task using the session object, to run and return completion handler
    let webTask = session.dataTask(with: request, completionHandler: {data, response, error in
    guard error == nil else {
        print(error?.localizedDescription ?? "Response Error")
        return
    }
    guard let serverData = data else {
        print("server data error")
        return
    }
    do {
        if let requestJson = try JSONSerialization.jsonObject(with: serverData, options: .mutableContainers) as? [String: Any]{
            print("Response: \(requestJson)")
        }
    } catch let responseError {
        print("Serialisation in error in creating response body: \(responseError.localizedDescription)")
        let message = String(bytes: serverData, encoding: .ascii)
        print(message as Any)
    }

    // Run the task
    webTask.resume()
}

Now your CI_Controller will be able to get param1 and param2 using $this->input->post('param1') and $this->input->post('param2')

In Bootstrap.css change the background attribute (position) of Modal from fixed to absolute

I might misunderstand, but are you trying to delete files newly ignored or do you want to ignore new modifications to these files ? In this case, the thing is working.

If you want to delete ignored files previously commited, then use

git rm –cached `git ls-files -i –exclude-standard`
git commit -m 'clean up'

It's possible to use a udev rule to let the system decide on the scheduler based on some characteristics of the hw.
An example udev rule for SSDs and other non-rotational drives might look like

# set noop scheduler for non-rotating disks
ACTION=="add|change", KERNEL=="sd[a-z]", ATTR{queue/rotational}=="0", ATTR{queue/scheduler}="noop"

inside a new udev rules file (e.g., /etc/udev/rules.d/60-ssd-scheduler.rules). This answer is based on the debian wiki

To check whether ssd disks would use the rule, it's possible to check for the trigger attribute in advance:

for f in /sys/block/sd?/queue/rotational; do printf "$f "; cat $f; done

select * from table_name where id=5 and column_name not in ('sandy,'pandy');

For all the given solution, when you try this in a modern browser (like FF), and you have set the correct model

// Model
[DataType(DataType.Date)]
[DisplayFormat(DataFormatString = "{0:dd-MM-yyyy}", ApplyFormatInEditMode = true)]
public DateTime Start { get; set; }

// View
<div class="form-group">
    @Html.LabelFor(model => model.Start, htmlAttributes: new { @class = "control-label col-md-2" })
    <div class="col-md-10">
        @Html.EditorFor(model => model.Start, "{0:dd-MM-yyyy}", new { htmlAttributes = new { @class = "form-control"} })
    </div>
</div>

mvc(5) wil render (the type of the input is set to date based on your date settings in your model!)

<div class="col-md-10">
<input class="form-control text-box single-line" data-val="true" data-val-date="The field Start must be a date." data-val-required="The Start field is required." id="Start" name="Start" value="01-05-2018" type="date">
        <span class="field-validation-valid text-danger" data-valmsg-for="Start" data-valmsg-replace="true"></span>
</div>

And the browser will show

To fix this you need to change the type to text instead of date (also if you want to use your custom calender)

@Html.EditorFor(model => model.Start, "{0:dd-MM-yyyy}", new { htmlAttributes = new { @class = "form-control", @type = "text" } })

parse_cols is deprecated, use usecols instead

that is:

df = pd.read_excel(file_loc, index_col=None, na_values=['NA'], usecols = "A,C:AA")

For me, javax.persistence.Id should be used instead of org.springframework.data.annotation.Id. For anyone who encountered this issue, you can check if you imported the right Id class.

Another solution I ran across tonight, which worked for my needs, was to add box-sizing attributes:

-webkit-box-sizing: border-box;
-moz-box-sizing: border-box;
box-sizing: border-box;

These attributes force the border to be part of the box model's width and height and correct the issue as well.

According to caniuse.com » box-sizing, box-sizing is supported in IE8+.

If you're using LESS or Sass there is a Bootstrap mixin for this.

LESS:

.box-sizing(border-box);

Sass:

@include box-sizing(border-box);

From commons-lang3

org.apache.commons.lang3.text.WordUtils.capitalizeFully(String str)

In your public View getView method change return null; to return convertView;.

I sometimes use (in Load)

this.BeginInvoke((MethodInvoker) delegate {
  // some code
});

or

this.BeginInvoke((MethodInvoker) this.SomeMethod);

(change "this" to your form variable if you are handling the event on an instance other than "this").

This pushes the invoke onto the windows-forms loop, so it gets processed when the form is processing the message queue.

[updated on request]

The Control.Invoke/Control.BeginInvoke methods are intended for use with threading, and are a mechanism to push work onto the UI thread. Normally this is used by worker threads etc. Control.Invoke does a synchronous call, where-as Control.BeginInvoke does an asynchronous call.

Normally, these would be used as:

SomeCodeOrEventHandlerOnAWorkerThread()
{
  // this code running on a worker thread...
  string newText = ExpensiveMethod(); // perhaps a DB/web call

  // now ask the UI thread to update itself
  this.Invoke((MethodInvoker) delegate {
      // this code runs on the UI thread!
      this.Text = newText;
  });
}

It does this by pushing a message onto the windows message queue; the UI thread (at some point) de-queues the message, processes the delegate, and signals the worker that it completed... so far so good ;-p

OK; so what happens if we use Control.Invoke / Control.BeginInvoke on the UI thread? It copes... if you call Control.Invoke, it is sensible enough to know that blocking on the message queue would cause an immediate deadlock - so if you are already on the UI thread it simply runs the code immediately... so that doesn't help us...

But Control.BeginInvoke works differently: it always pushes work onto the queue, even it we are already on the UI thread. This makes a really simply way of saying "in a moment", but without the inconvenience of timers etc (which would still have to do the same thing anyway!).

For any such problem:

1. Go to .expo folder
2. Find apk-cache
3. Remove that folder

and you are done..

Hope it helps?

According to version PostgreSQL 9.0 and above you can use the aggregate function called string_agg. Your new SQL should look something like this:

SELECT company_id, string_agg(employee, ', ')
    FROM mytable GROUP BY company_id;

I suppose you cannot change the dao.find() method to return an instance of Optional<Obj>, so you have to create the appropriate one yourself.

The following code should help you out. I've create the class OptionalAction, which provides the if-else mechanism for you.

public class OptionalTest
{
  public static Optional<DbObject> getObjectFromDb()
  {
    // doa.find()
    DbObject v = find();

    // create appropriate Optional
    Optional<DbObject> object = Optional.ofNullable(v);

    // @formatter:off
    OptionalAction.
    ifPresent(object)
    .then(o -> o.setAvailable(true))
    .elseDo(o -> System.out.println("Fatal! Object not available!"));
    // @formatter:on
    return object;
  }

  public static void main(String[] args)
  {
    Optional<DbObject> object = getObjectFromDb();
    if (object.isPresent())
      System.out.println(object.get());
    else
      System.out.println("There is no object!");
  }

  // find may return null
  public static DbObject find()
  {
    return (Math.random() > 0.5) ? null : new DbObject();
  }

  static class DbObject
  {
    private boolean available = false;

    public boolean isAvailable()
    {
      return available;
    }

    public void setAvailable(boolean available)
    {
      this.available = available;
    }

    @Override
    public String toString()
    {
      return "DbObject [available=" + available + "]";
    }
  }

  static class OptionalAction
  {
    public static <T> IfAction<T> ifPresent(Optional<T> optional)
    {
      return new IfAction<>(optional);
    }

    private static class IfAction<T>
    {
      private final Optional<T> optional;

      public IfAction(Optional<T> optional)
      {
        this.optional = optional;
      }

      public ElseAction<T> then(Consumer<? super T> consumer)
      {
        if (optional.isPresent())
          consumer.accept(optional.get());
        return new ElseAction<>(optional);
      }
    }

    private static class ElseAction<T>
    {
      private final Optional<T> optional;

      public ElseAction(Optional<T> optional)
      {
        this.optional = optional;
      }

      public void elseDo(Consumer<? super T> consumer)
      {
        if (!optional.isPresent())
          consumer.accept(null);
      }
    }
  }
}

In projects that use the Gradle build system, what you want to change is the applicationId in the build.gradle file. The build system uses this value to override anything specified by hand in the manifest file when it does the manifest merge and build.

For example, your module's build.gradle file looks something like this:

apply plugin: 'com.android.application'

android {
    compileSdkVersion 20
    buildToolsVersion "20.0.0"

    defaultConfig {
        // CHANGE THE APPLICATION ID BELOW
        applicationId "com.example.fred.myapplication"
        minSdkVersion 10
        targetSdkVersion 20
        versionCode 1
        versionName "1.0"
    }
}

applicationId is the name the build system uses for the property that eventually gets written to the package attribute of the manifest tag in the manifest file. It was renamed to prevent confusion with the Java package name (which you have also tried to modify), which has nothing to do with it.

Use the CSS Flexbox flex-grow property to achieve this.

.main {
  display: flex;
}
.col-1, .col-3 {
  width: 100px;
}
.col-2 {
  flex-grow: 1;
}

<div class="main">
  <div class="col-1" style="background: #fc9;">Left column</div>
  <div class="col-2" style="background: #eee;">Middle column</div>
  <div class="col-3" style="background: #fc9;">Right column</div>
</div>

Using a regex as you described is the simple way (as far as I am aware). If you want a range you could use [^a-f].

Write a method minimum3 that returns the smallest of three floating-point numbers. Use the Math.min method to implement minimum3. Incorporate the method into an application that reads three values from the user, determines the smallest value and displays the result.

Summing up what the others have suggested, and adding a third way

You can:

• assign(**kwargs):

   df.assign(Name='abc')
  

• access the new column series (it will be created) and set it:

   df['Name'] = 'abc'
  

• insert(loc, column, value, allow_duplicates=False)

   df.insert(0, 'Name', 'abc')
  

where the argument loc ( 0 <= loc <= len(columns) ) allows you to insert the column where you want.

'loc' gives you the index that your column will be at after the insertion. For example, the code above inserts the column Name as the 0-th column, i.e. it will be inserted before the first column, becoming the new first column. (Indexing starts from 0).

All these methods allow you to add a new column from a Series as well (just substitute the 'abc' default argument above with the series).

I have had to do this for a small Node.js project and found this work-around:

{
 "modify_head": [

  "<script type='text/javascript'>",
  "<!--",
  "  function drawSomeText(id) {",
  "  var pjs = Processing.getInstanceById(id);",
  "  var text = document.getElementById('inputtext').value;",
  "  pjs.drawText(text);}",
  "-->",
  "</script>"

 ],

 "modify_body": [

  "<input type='text' id='inputtext'></input>",
  "<button onclick=drawSomeText('ExampleCanvas')></button>"

 ],
}

This looks quite neat to me, appart from that I have to use double quotes everywhere. Though otherwise, I could, perhaps, use YAML, but that has other pitfalls and is not supported natively. Once parsed, I just use myData.modify_head.join('\n') or myData.modify_head.join(), depending upon whether I want a line break after each string or not.

Just saying...here is a more simple approach to this:

declare @sdate date = '2017-06-25'
    , @edate date = '2017-07-24';

with dates_CTE (date) as (
    select @sdate 
    Union ALL
    select DATEADD(day, 1, date)
    from dates_CTE
    where date < @edate
)
select *
from dates_CTE;

Make it simple and use R basic functions:

# To get the LEFT part:
> substr(a, 1, 4)
[1] "left"
> 
# To get the MIDDLE part:
> substr(a, 3, 7)
[1] "ftrig"
> 
# To get the RIGHT part:
> substr(a, 5, 10)
[1] "right"

The substr() function tells you where start and stop substr(x, start, stop)

If you installed it with homebrew, the binary will be somewhere like

/usr/local/Cellar/mysql/5.6.10/bin/mysqld

which means you can start it with

/usr/local/Cellar/mysql/5.6.10/support-files/mysql.server start

and stop it with

/usr/local/Cellar/mysql/5.6.10/support-files/mysql.server stop

Edit: As Jacob Raccuia mentioned, make sure you put the appropriate version of MySQL in the path.

I look up this question about once a month and always have to dig out the best answer from the comments:

df.loc[(df!=0).any(1)]

Thanks Dan Allan!

"Book Author Title".parameterize('_').to_sym
=> :book_author_title

http://api.rubyonrails.org/classes/ActiveSupport/Inflector.html#method-i-parameterize

parameterize is a rails method, and it lets you choose what you want the separator to be. It is a dash "-" by default.

My version:

int split(char* str, const char delimeter, char*** args) {
    int cnt = 1;
    char* t = str;

    while (*t == delimeter) t++;

    char* t2 = t;
    while (*(t2++))
        if (*t2 == delimeter && *(t2 + 1) != delimeter && *(t2 + 1) != 0) cnt++;

    (*args) = malloc(sizeof(char*) * cnt);

    for(int i = 0; i < cnt; i++) {
        char* ts = t;
        while (*t != delimeter && *t != 0) t++;

        int len = (t - ts + 1);
        (*args)[i] = malloc(sizeof(char) * len);
        memcpy((*args)[i], ts, sizeof(char) * (len - 1));
        (*args)[i][len - 1] = 0;

        while (*t == delimeter) t++;
    }

    return cnt;
}

First You have to use this code in MainActivity.java class

@Override
public void onClick(View v)
{
    // TODO Auto-generated method stub
    Intent i = new Intent(getApplicationContext(),NextActivity.class);
    startActivity(i);

}

You can pass intent this way.

Second

add proper entry into manifest.xml file.

<activity android:name=".NextActivity" />

Now see what happens.

Yes, this program has likely used less than a millsecond. Try using microsecond resolution with timeval.

e.g:

#include <sys/time.h>

struct timeval stop, start;
gettimeofday(&start, NULL);
//do stuff
gettimeofday(&stop, NULL);
printf("took %lu us\n", (stop.tv_sec - start.tv_sec) * 1000000 + stop.tv_usec - start.tv_usec); 

You can then query the difference (in microseconds) between stop.tv_usec - start.tv_usec. Note that this will only work for subsecond times (as tv_usec will loop). For the general case use a combination of tv_sec and tv_usec.

Edit 2016-08-19

A more appropriate approach on system with clock_gettime support would be:

struct timespec start, end;
clock_gettime(CLOCK_MONOTONIC_RAW, &start);
//do stuff
clock_gettime(CLOCK_MONOTONIC_RAW, &end);

uint64_t delta_us = (end.tv_sec - start.tv_sec) * 1000000 + (end.tv_nsec - start.tv_nsec) / 1000;

Send params from View to an other View, from Sender View to Receiver View use viewParam and includeViewParams=true

In Sender

1. Declare params to be sent. We can send String, Object,…

Sender.xhtml

<f:metadata>
      <f:viewParam name="ID" value="#{senderMB._strID}" />
</f:metadata>

2. We’re going send param ID, it will be included with “includeViewParams=true” in return String of click button event Click button fire senderMB.clickBtnDetail(dto) with dto from senderMB._arrData

Sender.xhtml

<p:dataTable rowIndexVar="index" id="dataTale"value="#{senderMB._arrData}" var="dto">
      <p:commandButton action="#{senderMB.clickBtnDetail(dto)}" value="??" 
      ajax="false"/>
</p:dataTable>

In senderMB.clickBtnDetail(dto) we assign _strID with argument we got from button event (dto), here this is Sender_DTO and assign to senderMB._strID

Sender_MB.java
    public String clickBtnDetail(sender_DTO sender_dto) {
        this._strID = sender_dto.getStrID();
        return "Receiver?faces-redirect=true&includeViewParams=true";
    }

The link when clicked will become http://localhost:8080/my_project/view/Receiver.xhtml?*ID=12345*

In Recever

1. Get viewParam Receiver.xhtml In Receiver we declare f:viewParam to get param from get request (receive), the name of param of receiver must be the same with sender (page)

Receiver.xhtml

<f:metadata><f:viewParam name="ID" value="#{receiver_MB._strID}"/></f:metadata>

It will get param ID from sender View and assign to receiver_MB._strID

2. Use viewParam In Receiver, we want to use this param in sql query before the page render, so that we use preRenderView event. We are not going to use constructor because constructor will be invoked before viewParam is received So that we add

Receiver.xhtml

<f:event listener="#{receiver_MB.preRenderView}" type="preRenderView" />

into f:metadata tag

Receiver.xhtml

<f:metadata>
<f:viewParam name="ID" value="#{receiver_MB._strID}" />
<f:event listener="#{receiver_MB.preRenderView}"
            type="preRenderView" />
</f:metadata>

Now we want to use this param in our read database method, it is available to use

Receiver_MB.java
public void preRenderView(ComponentSystemEvent event) throws Exception {
        if (FacesContext.getCurrentInstance().isPostback()) {
            return;
        }
        readFromDatabase();
    }
private void readFromDatabase() {
//use _strID to read and set property   
}

There is an assertNotEquals in JUnit 4.11: https://github.com/junit-team/junit/blob/master/doc/ReleaseNotes4.11.md#improvements-to-assert-and-assume

import static org.junit.Assert.assertNotEquals;

EDIT: If you are using a Dockerfile for deployments these are the steps you need to take to resolve this issue.

Change your Dockerfile to include the following:

FROM mcr.microsoft.com/dotnet/core/sdk:3.1 AS build-env
ENV PATH $PATH:/root/.dotnet/tools
RUN dotnet tool install -g dotnet-ef --version 3.1.1

Also change your dotnet ef commands to be dotnet-ef

Click anywhere in chrome window and type thisisunsafe (instead of badidea previously) in chrome.

This passphrase may change in future. This is the source

https://chromium.googlesource.com/chromium/src/+/master/components/security_interstitials/core/browser/resources/interstitial_large.js#19

According to that line, type window.atob('dGhpc2lzdW5zYWZl') to your browser console and it will give you the actual passphrase.

This time the passphrase is thisisunsafe.

I do the following:

1. put #! /usr/bin/env python3 at top of script
2. chmod u+x file.py
3. Change .py to .command in file name

This essentially turns the file into a bash executable. When you double-click it, it should run. This works in Unix-based systems.

There is a more efficient way of doing this in Windows 7. SETX is installed by default and supports connecting to other systems.

To modify a remote system's global environment variables, you would use

setx /m /s HOSTNAME-GOES-HERE VariableNameGoesHere VariableValueGoesHere

This does not require restarting Windows Explorer.

until passwd
do
  echo "Try again"
done

or

while ! passwd
do
  echo "Try again"
done

I find the above answers really lengthy, so to summarize:

The mysqli extension has a number of benefits, the key enhancements over the mysql extension being:

• Object-oriented interface
• Support for Prepared Statements
• Support for Multiple Statements
• Support for Transactions
• Enhanced debugging capabilities
• Embedded server support

Source: MySQLi overview

As explained in the above answers, the alternatives to mysql are mysqli and PDO (PHP Data Objects).

• API supports server-side Prepared Statements: Supported by MYSQLi and PDO
• API supports client-side Prepared Statements: Supported only by PDO
• API supports Stored Procedures: Both MySQLi and PDO
• API supports Multiple Statements and all MySQL 4.1+ functionality - Supported by MySQLi and mostly also by PDO

Both MySQLi and PDO were introduced in PHP 5.0, whereas MySQL was introduced prior to PHP 3.0. A point to note is that MySQL is included in PHP5.x though deprecated in later versions.

In Ruby and other languages that support POSIX character classes in bracket expressions, you can do simply:

/\A[[:alpha:]]+\z/i

That will match alpha-chars in all Unicode alphabet languages. Easy peasy.

More info: http://en.wikipedia.org/wiki/Regular_expression#Character_classes http://ruby-doc.org/core-2.0/Regexp.html

The apps UI only works for panels.

The best you can do is to draw a button yourself and put that into your spreadsheet. Than you can add a macro to it.

Go into "Insert > Drawing...", Draw a button and add it to the spreadsheet. Than click it and click "assign Macro...", then insert the name of the function you wish to execute there. The function must be defined in a script in the spreadsheet.

Alternatively you can also draw the button somewhere else and insert it as an image.

More info: https://developers.google.com/apps-script/guides/menus

You can do this in a couple of ways.

One, is to build up the query yourself and execute it.

SET @sql = 'SELECT ' + @columnName + ' FROM yourTable'
sp_executesql @sql

If you opt for that method, be very certain to santise your input. Even if you know your application will only give 'real' column names, what if some-one finds a crack in your security and is able to execute the SP directly? Then they can execute just about anything they like. With dynamic SQL, always, always, validate the parameters.

Alternatively, you can write a CASE statement...

SELECT
  CASE @columnName
    WHEN 'Col1' THEN Col1
    WHEN 'Col2' THEN Col2
                ELSE NULL
  END as selectedColumn
FROM
  yourTable

This is a bit more long winded, but a whole lot more secure.

I had this problem too, but I solved it in a much simpler way...

I was using the class "ckeditor" in my jQuery script as the selector for which textareas I wanted use for CKEditor. The default ckeditor JS script also uses this class to identify which textareas to use for CKEditor.

This meant there is a conflict between my jQuery script and the default ckeditor script.

I simply changed the class of the textarea and my jQuery script to 'do_ckeditor'(you could use anything except "ckeditor") and it worked.

Try changing border to outline:

outline: 1px solid black;

even i faced the same problem. The possibility of this could be usage of same port by two or more application/process. In Some cases you can use different port number which will avoid this problem, but in other case you have to manually kill the process with help of command prompt.

The command to kill is, In your command prompt first enter this command

C:\Users\A611003>tasklist

After this you can able to see list of process running with process ID. For example,

From this select the process you want to stop, for example consider the process id 304 is your server and you have problem with that. Then enter this command.

C:\Users\A611003>Taskkill /PID 304 /F

This will kill that process now you can clean, publish your server and start it.

Note: If you fail to add /F in the above command it does nothing. It is the force kill. you can also try/? for list of available options.

yes there is : len(data)-1.

For the first element it´s : 0

I work on 60-70% zoom vue and my dropdown are unreadable so I made this simple code to overcome the issue

Note that I selected first all my dropdown lsts (CTRL+mouse click), went on formula tab, clicked "define name" and called them "ProduktSelection"

Private Sub Worksheet_SelectionChange(ByVal Target As Range)

Dim KeyCells As Range
Set KeyCells = Range("ProduktSelection")
    If Not Application.Intersect(KeyCells, Range(Target.Address)) _
           Is Nothing Then

ActiveWindow.Zoom = 100

End If

End Sub

I then have another sub

Private Sub Worksheet_Change(ByVal Target As Range) 

where I come back to 65% when value is changed.

without jQuery you can use

document.getElementById('text_input').setAttribute('maxlength',200);

There are two reasons you might get this message:

1. ASP.Net is not configured. For this run from Administrator command %FrameworkDir%\%FrameworkVersion%\aspnet_regiis -i. Read the message carefully. On Windows8/IIS8 it may say that this is no longer supported and you may have to use Turn Windows Features On/Off dialog in Install/Uninstall a Program in Control Panel.
2. Another reason this may happen is because your App Pool is not configured correctly. For example, you created website for WordPress and you also want to throw in few aspx files in there, WordPress creates app pool that says don't run CLR stuff. To fix this just open up App Pool and enable CLR.

If using TextBox2.Text as the source for a numeric value, it must first be checked to see if a value exists, and then converted to integer.

If the text box is blank when Convert.ToInt32 is called, you will receive the System.FormatException. Suggest trying:

protected void SetImageWidth()
{
   try{
      Image1.Width = Convert.ToInt32(TextBox1.Text);
   }
   catch(System.FormatException)
   {
      Image1.Width = 100; // or other default value as appropriate in context.
   }
}

file -bi <file name>

If you like to do this for a bunch of files

for f in `find | egrep -v Eliminate`; do echo "$f" ' -- ' `file -bi "$f"` ; done

The above works,(having an original document with mixed pages of 11' and 16' wide). However auto rotate needs to be off otherwise landscape pages are saved with page white top and bottom, so dont work in full screen view.

Solution is to re open the new PDF in acrobat and crop the first image (carefully to avoid white border), then select page range i.e. all, this then applies to all pages. job done !

Regarding your question (b), be aware that the Websocket specification hasn't been finalised. According to the W3C:

Implementors should be aware that this specification is not stable.

Personally I regard Websockets to be waaay too bleeding edge to use at present. Though I'll probably find them useful in a year or so.

$date=date("Y-m-d");
echo"$date";
echo"<br>SELECT DATE: <input type='date'  name='date'  id='datepicker' 
value='$date' required >";

function hex2a(hexx) {
    var hex = hexx.toString();//force conversion
    var str = '';
    for (var i = 0; (i < hex.length && hex.substr(i, 2) !== '00'); i += 2)
        str += String.fromCharCode(parseInt(hex.substr(i, 2), 16));
    return str;
}
hex2a('32343630'); // returns '2460'

You might try having that delete job operate by first inserting the key of each row to be deleted into a temp table like this pseudocode

create temporary table deletetemp (userid int);

insert into deletetemp (userid)
  select userid from onlineusers where datetime <= now - interval 900 second;

delete from onlineusers where userid in (select userid from deletetemp);

Breaking it up like this is less efficient but it avoids the need to hold a key-range lock during the delete.

Also, modify your select queries to add a where clause excluding rows older than 900 seconds. This avoids the dependency on the cron job and allows you to reschedule it to run less often.

Theory about the deadlocks: I don't have a lot of background in MySQL but here goes... The delete is going to hold a key-range lock for datetime, to prevent rows matching its where clause from being added in the middle of the transaction, and as it finds rows to delete it will attempt to acquire a lock on each page it is modifying. The insert is going to acquire a lock on the page it is inserting into, and then attempt to acquire the key lock. Normally the insert will wait patiently for that key lock to open up but this will deadlock if the delete tries to lock the same page the insert is using because thedelete needs that page lock and the insert needs that key lock. This doesn't seem right for inserts though, the delete and insert are using datetime ranges that don't overlap so maybe something else is going on.

http://dev.mysql.com/doc/refman/5.1/en/innodb-next-key-locking.html

There is a node.js library called named-regexp that you could use in your node.js projects (on in the browser by packaging the library with browserify or other packaging scripts). However, the library cannot be used with regular expressions that contain non-named capturing groups.

If you count the opening capturing braces in your regular expression you can create a mapping between named capturing groups and the numbered capturing groups in your regex and can mix and match freely. You just have to remove the group names before using the regex. I've written three functions that demonstrate that. See this gist: https://gist.github.com/gbirke/2cc2370135b665eee3ef

Since R is already installed, you should be able to upgrade it with this method. First of all, you may want to have the packages you installed in the previous version in the new one,so it is convenient to check this post. Then, follow the instructions from here

1. Open the sources.list file:

    sudo nano /etc/apt/sources.list    
   

2. Add a line with the source from where the packages will be retrieved. For example:

    deb https://cloud.r-project.org/bin/linux/ubuntu/ version/
   

   Replace https://cloud.r-project.org with whatever mirror you would like to use, and replace version/ with whatever version of Ubuntu you are using (eg, trusty/, xenial/, and so on). If you're getting a "Malformed line error", check to see if you have a space between /ubuntu/ and version/.

3. Fetch the secure APT key:

    gpg --keyserver keyserver.ubuntu.com --recv-key E298A3A825C0D65DFD57CBB651716619E084DAB9
   

or

    gpg --hkp://keyserver keyserver.ubuntu.com:80 --recv-key E298A3A825C0D65DFD57CBB651716619E084DAB9

4. Add it to keyring:

    gpg -a --export E084DAB9 | sudo apt-key add -
   

5. Update your sources and upgrade your installation:

    sudo apt-get update && sudo apt-get upgrade
   

6. Install the new version

    sudo apt-get install r-base-dev
   

7. Recover your old packages following the solution that best suits to you (see this). For instance, to recover all the packages (not only those from CRAN) the idea is:

-- copy the packages from R-oldversion/library to R-newversion/library, (do not overwrite a package if it already exists in the new version!).

-- Run the R command update.packages(checkBuilt=TRUE, ask=FALSE).

glob() and FilesystemIterator examples:

/* 
 * glob() examples
 */

// get the array of full paths
$result = glob( 'path/*' );

// get the array of file names
$result = array_map( function( $item ) {
    return basename( $item );
}, glob( 'path/*' ) );


/* 
 * FilesystemIterator examples
 */

// get the array of file names by using FilesystemIterator and array_map()
$result = array_map( function( $item ) {
    // $item: SplFileInfo object
    return $item->getFilename();
}, iterator_to_array( new FilesystemIterator( 'path' ), false ) );

// get the array of file names by using FilesystemIterator and iterator_apply() filter
$it = new FilesystemIterator( 'path' );
iterator_apply( 
    $it, 
    function( $item, &$result ) {
        // $item: FilesystemIterator object that points to current element
        $result[] = (string) $item;
        // The function must return TRUE in order to continue iterating
        return true;
    }, 
    array( $it, &$result )
);

In support of unwind, remember that Objective-C is a superset of C, rather than a completely new language.

Anything you can do in regular old ANSI C can be done in Objective-C.

It is because of CASCADE TYPE

if you put

@OneToOne(cascade=CascadeType.ALL)

You can just save your object like this

user.setCountry(country);
session.save(user)

but if you put

 @OneToOne(cascade={    
            CascadeType.PERSIST,
            CascadeType.REFRESH,
            ...
})

You need to save your object like this

user.setCountry(country);
session.save(country)
session.save(user)

If you like GUI and are using Windows, here is an easy way.

1. Download WinMerge
2. Check out the two branches into different folders
3. Do a folder by folder compare using WinMerge. You can also easily make modifications if one of the branches is the one you are working on.

I'm under Linux too. For me, it only works when I press CTRL+SHIFT+/, and it's like a single comment, not a block comment. The reason is to acceed the / character, I have to press SHIFT, if I do not, sublime text detects that I pressed CTRL + :.

Here it is my solution to get back normal preferences. Write in Key Bindings - User :

{ "keys": ["ctrl+:"], "command": "toggle_comment", "args": { "block": false } }, { "keys": ["ctrl+shift+:"], "command": "toggle_comment", "args": { "block": true } }

I use the Assembly to set the form's title as such:

private String BuildFormTitle()
{
    String AppName = System.Reflection.Assembly.GetEntryAssembly().GetName().Name;
    String FormTitle = String.Format("{0} {1} ({2})", 
                                     AppName, 
                                     Application.ProductName, 
                                     Application.ProductVersion);
    return FormTitle;
}

As far as I know there is nothing build in that does this for you. However you could have a look at the Google IO sourcecode, especially the BaseActivity. Search for "auto hide" or look at onMainContentScrolled

In order to hide the Toolbar your can just do something like this:

toolbar.animate().translationY(-toolbar.getBottom()).setInterpolator(new AccelerateInterpolator()).start();

If you want to show it again you call:

toolbar.animate().translationY(0).setInterpolator(new DecelerateInterpolator()).start();

The simplest way especially if you don't have a context, if you're using RxAndroid you can do:

AndroidSchedulers.mainThread().scheduleDirect {
    runCodeHere()
}

I found it easiest to run my own gem server using geminabox

See these simple instructions.

Below Codes

public static byte[] serializeObj(Object obj) throws IOException {
  ByteArrayOutputStream baOStream = new ByteArrayOutputStream();
  ObjectOutputStream objOStream = new ObjectOutputStream(baOStream);

  objOStream.writeObject(obj); 
  objOStream.flush();
  objOStream.close();
  return baOStream.toByteArray(); 
} 

OR

BufferedImage img = ...
ByteArrayOutputStream baos = new ByteArrayOutputStream(1000);
ImageIO.write(img, "jpeg", baos);
baos.flush();
byte[] result = baos.toByteArray();
baos.close();

A cookie is just another HTTP header. You can always set it while making a HTTP call with the apache library or with HTTPUrlConnection. Either way you should be able to read and set HTTP cookies in this fashion.

You can read this article for more information.

I can share my peace of code to demonstrate how easy you can make it.

public static String getServerResponseByHttpGet(String url, String token) {

        try {
            HttpClient client = new DefaultHttpClient();
            HttpGet get = new HttpGet(url);
            get.setHeader("Cookie", "PHPSESSID=" + token + ";");
            Log.d(TAG, "Try to open => " + url);

            HttpResponse httpResponse = client.execute(get);
            int connectionStatusCode = httpResponse.getStatusLine().getStatusCode();
            Log.d(TAG, "Connection code: " + connectionStatusCode + " for request: " + url);

            HttpEntity entity = httpResponse.getEntity();
            String serverResponse = EntityUtils.toString(entity);
            Log.d(TAG, "Server response for request " + url + " => " + serverResponse);

            if(!isStatusOk(connectionStatusCode))
                return null;

            return serverResponse;

        } catch (UnsupportedEncodingException e) {
            e.printStackTrace();
        } catch (ClientProtocolException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
        } catch (IllegalArgumentException e) {
            e.printStackTrace();
        } catch (Exception e) {
            e.printStackTrace();
        }

        return null;
    }

I had similar issue. I was not able to use value="something" to display and edit. I had to use the below command inside my <input>along withe ng model being declared.

[(ngModel)]=userDataToPass.pinCode

Where I have the list of data in the object userDataToPass and the item that I need to display and edit is pinCode.

For the same , I referred to this YouTube video

I was interested in this question, so I did a test just now. Using .NET Framework 4.5.2 on an Intel(R) Core(TM) i3-2328M CPU @ 2.20GHz, 2200 Mhz, 2 Core(s) with 8GB ram running Microsoft Windows 7 Ultimate.

It looks like LINQ might be faster than for each loop. Here are the results I got:

Exists = True
Time   = 174
Exists = True
Time   = 149

It would be interesting if some of you could copy & paste this code in a console app and test as well. Before testing with an object (Employee) I tried the same test with integers. LINQ was faster there as well.

public class Program
{
    public class Employee
    {
        public int id;
        public string name;
        public string lastname;
        public DateTime dateOfBirth;

        public Employee(int id,string name,string lastname,DateTime dateOfBirth)
        {
            this.id = id;
            this.name = name;
            this.lastname = lastname;
            this.dateOfBirth = dateOfBirth;

        }
    }

    public static void Main() => StartObjTest();

    #region object test

    public static void StartObjTest()
    {
        List<Employee> items = new List<Employee>();

        for (int i = 0; i < 10000000; i++)
        {
            items.Add(new Employee(i,"name" + i,"lastname" + i,DateTime.Today));
        }

        Test3(items, items.Count-100);
        Test4(items, items.Count - 100);

        Console.Read();
    }


    public static void Test3(List<Employee> items, int idToCheck)
    {

        Stopwatch s = new Stopwatch();
        s.Start();

        bool exists = false;
        foreach (var item in items)
        {
            if (item.id == idToCheck)
            {
                exists = true;
                break;
            }
        }

        Console.WriteLine("Exists=" + exists);
        Console.WriteLine("Time=" + s.ElapsedMilliseconds);

    }

    public static void Test4(List<Employee> items, int idToCheck)
    {

        Stopwatch s = new Stopwatch();
        s.Start();

        bool exists = items.Exists(e => e.id == idToCheck);

        Console.WriteLine("Exists=" + exists);
        Console.WriteLine("Time=" + s.ElapsedMilliseconds);

    }

    #endregion


    #region int test
    public static void StartIntTest()
    {
        List<int> items = new List<int>();

        for (int i = 0; i < 10000000; i++)
        {
            items.Add(i);
        }

        Test1(items, -100);
        Test2(items, -100);

        Console.Read();
    }

    public static void Test1(List<int> items,int itemToCheck)
    {

        Stopwatch s = new Stopwatch();
        s.Start();

        bool exists = false;
        foreach (var item in items)
        {
            if (item == itemToCheck)
            {
                exists = true;
                break;
            }
        }

        Console.WriteLine("Exists=" + exists);
        Console.WriteLine("Time=" + s.ElapsedMilliseconds);

    }

    public static void Test2(List<int> items, int itemToCheck)
    {

        Stopwatch s = new Stopwatch();
        s.Start();

        bool exists = items.Contains(itemToCheck);

        Console.WriteLine("Exists=" + exists);
        Console.WriteLine("Time=" + s.ElapsedMilliseconds);

    }

    #endregion

}

Java's import statement is pure syntactical sugar. import is only evaluated at compile time to indicate to the compiler where to find the names in the code.

You may live without any import statement when you always specify the full qualified name of classes. Like this line needs no import statement at all:

javax.swing.JButton but = new  javax.swing.JButton();

The import statement will make your code more readable like this:

import javax.swing.*;

JButton but = new JButton();

The path can either be full or relative (of course if the image is from another domain it must be full).

You don't need to use quotes in the URI; the syntax can either be:

background-image: url(image.jpg);

Or

background-image: url("image.jpg");

However, from W3:

Some characters appearing in an unquoted URI, such as parentheses, white space characters, single quotes (') and double quotes ("), must be escaped with a backslash so that the resulting URI value is a URI token: '\(', '\)'.

So in instances such as these it is either necessary to use quotes or double quotes, or escape the characters.

Your status-codes are also a collection, so use Contains:

var allowedStatus = new[]{ "A", "B", "C" };
var filteredOrders = orders.Order.Where(o => allowedStatus.Contains(o.StatusCode));

or in query syntax:

var filteredOrders = from order in orders.Order
                     where allowedStatus.Contains(order.StatusCode)
                     select order;

You can use the following CTE as well. You can just modify it as you find fit. But this will add the same values into the student CTE.

This will add 1000 records but you can change it to 10000 or to a maximum of 32767

;WITH thetable(rowid,sname,semail,spassword) AS
(
    SELECT 1  , 'name' , 'email' , 'password'
    UNION ALL
    SELECT rowid+1 ,'name' , 'email' , 'password' 
    FROM thetable WHERE rowid < 1000
)

SELECT rowid,sname,semail,spassword 
FROM thetable ORDER BY rowid
OPTION (MAXRECURSION 1000);

Swift is worry that your case statement is not covering all cases, to fix it you need to create a default case:

do {
    let sandwich = try makeMeSandwich(kitchen)
    print("i eat it \(sandwich)")
} catch SandwichError.NotMe {
    print("Not me error")
} catch SandwichError.DoItYourself {
    print("do it error")
} catch Default {
    print("Another Error")
}

If this is happening to you in an AJAX post, you'll want to compare the values that you're sending and the values that the Controller is expecting.

In my case, I had changed a parameter in a serializable class from State to StateID, and then in an AJAX call didn't change the receiving field out 'data'

success: function (data) { MakeAddressForm.formData.StateID = data.State;

Note that the class was changed - it doesn't matter what I call it in the formData.

This created a null reference in the formData which I was trying to post back to the Controller once I'd done the update. Obviously, if someone changed the state (which was the purpose of the form) then they didn't get the error, so it made for a hard one to find.

This also through a 500 error. I'm posting this here in hopes it saves someone else the time I've wasted

In Python 3.2 a new html module was introduced, which is used for escaping reserved characters from HTML markup.

It has one function escape():

>>> import html
>>> html.escape('x > 2 && x < 7 single quote: \' double quote: "')
'x &gt; 2 &amp;&amp; x &lt; 7 single quote: &#x27; double quote: &quot;'

If your code is prepared to deal with overflow errors, you can throw an exception if data is too large.

size_t data = 99999999;
if ( data > INT_MAX )
{
   throw std::overflow_error("data is larger than INT_MAX");
}
int convertData = static_cast<int>(data);

It's really easy to do from the command line. I had a gist of a script for doing this. It has now been incorporated into the ipa_sign script in https://github.com/RichardBronosky/ota-tools which I use daily. If you have any questions about using these tools, don't hesitate to ask.

The heart of it is this:

CODESIGN_ALLOCATE=`xcrun --find codesign_allocate`; export CODESIGN_ALLOCATE
IPA="/path/to/file.ipa"
PROVISION="/path/to/file.mobileprovision"
CERTIFICATE="Name of certificate: To sign with" # must be in keychain
# unzip the ipa
unzip -q "$IPA"
# remove the signature
rm -rf Payload/*.app/_CodeSignature
# replace the provision
cp "$PROVISION" Payload/*.app/embedded.mobileprovision
# sign with the new certificate (--resource-rules has been deprecated OS X Yosemite (10.10), it can safely be removed)
/usr/bin/codesign -f -s "$CERTIFICATE" Payload/*.app
# zip it back up
zip -qr resigned.ipa Payload

Your new signed app is called resigned.ipa

In your xampppath\apache\conf\extra open file httpd-xampp.conf and find the below tag:

# Close XAMPP sites here
<LocationMatch "^/(?i:(?:xampp|licenses|phpmyadmin|webalizer|server-status|server-info))">
    Order deny,allow
    Deny from all
    Allow from ::1 127.0.0.0/8 
    ErrorDocument 403 /error/HTTP_XAMPP_FORBIDDEN.html.var
</LocationMatch>

and add

"Allow from all"

after Allow from ::1 127.0.0.0/8 {line}

Restart xampp, and you are done.

In later versions of Xampp

...you can simply remove this part

#
# New XAMPP security concept
#
<LocationMatch "^/(?i:(?:xampp|security|licenses|phpmyadmin|webalizer|server-status|server-info))">
        Require local
    ErrorDocument 403 /error/XAMPP_FORBIDDEN.html.var
</LocationMatch>

from the same file and it should work over the local network.

If you want to convert string to double data type then most choose parseDouble() method. See the example code:

String str = "123.67";
double d = parseDouble(str);

You will get the value in double. See the StringToDouble tutorial at tutorialData.

Since I often come here and then wondering how to use the brackets, this answer might be useful for those like me.

EXEC sp_rename '[DB].[dbo].[Tablename].OldColumnName', 'NewColumnName', 'COLUMN'; 

• The OldColumnName must not be in []. It will not work.
• Don't put NewColumnName into [], it will result into [[NewColumnName]].

The null character '\0' (also null terminator), abbreviated NUL, is a control character with the value zero. Its the same in C and objective C

The character has much more significance in C and it serves as a reserved character used to signify the end of a string,often called a null-terminated string

The length of a C string (an array containing the characters and terminated with a '\0' character) is found by searching for the (first) NUL byte.

In simple cases, the compiler converts calls to printf() to calls to puts().

For example, the following code will be compiled to the assembly code I show next.

#include <stdio.h>
main() {
    printf("Hello world!");
    return 0;
}

push rbp
mov rbp,rsp
mov edi,str.Helloworld!
call dword imp.puts
mov eax,0x0
pop rbp
ret

In this example, I used GCC version 4.7.2 and compiled the source with gcc -o hello hello.c.

Just saying for those who using Imagick class in PHP:

$im -> gaussianBlurImage(0.8, 10);      //blur
$im -> setImageCompressionQuality(85);  //set compress quality to 85

Go to your WCF project - properties -> -> debuggers -> unmark the checkbox

Enable Edit and Continue

Applying a selector from the .nav-tabs seems to be working

HTML is

<ul class="nav nav-tabs">
    <li><a href="#aaa" data-toggle="tab">AAA</a></li>
    <li><a href="#bbb" data-toggle="tab">BBB</a></li>
    <li><a href="#ccc" data-toggle="tab">CCC</a></li>
</ul>
<div class="tab-content" id="tabs">
    <div class="tab-pane" id="aaa">...Content...</div>
    <div class="tab-pane" id="bbb">...Content...</div>
    <div class="tab-pane" id="ccc">...Content...</div>
</div>

Script is

$(document).ready(function(){
  activaTab('aaa');
});

function activaTab(tab){
  $('.nav-tabs a[href="#' + tab + '"]').tab('show');
};

http://jsfiddle.net/pThn6/80/

No, that's not really possible, as

• there can be more than one string giving the same MD5
• it was designed to be hard to "reverse"

The goal of the MD5 and its family of hashing functions is

• to get short "extracts" from long string
• to make it hard to guess where they come from
• to make it hard to find collisions, that is other words having the same hash (which is a very similar exigence as the second one)

Think that you can get the MD5 of any string, even very long. And the MD5 is only 16 bytes long (32 if you write it in hexa to store or distribute it more easily). If you could reverse them, you'd have a magical compacting scheme.

This being said, as there aren't so many short strings (passwords...) used in the world, you can test them from a dictionary (that's called "brute force attack") or even google for your MD5. If the word is common and wasn't salted, you have a reasonable chance to succeed...

Use this JsonKnownTypes, it's very similar way to use, it just add discriminator to json:

[JsonConverter(typeof(JsonKnownTypeConverter<BaseClass>))]
[JsonKnownType(typeof(Base), "base")]
[JsonKnownType(typeof(Derived), "derived")]
public class Base
{
    public string Name;
}
public class Derived : Base
{
    public string Something;
}

Now when you serialize object in json will be add "$type" with "base" and "derived" value and it will be use for deserialize

Serialized list example:

[
    {"Name":"some name", "$type":"base"},
    {"Name":"some name", "Something":"something", "$type":"derived"}
]

The most generic and the easiest way to reverse a list will be :

public static <T> void reverseHelper(List<T> li){

 li.stream()
.sorted((x,y)-> -1)
.collect(Collectors.toList())
.forEach(System.out::println);

    }

Try this:

import android.support.v7.app.ActionBar;
import android.support.v7.app.AppCompatActivity;
...
    ActionBar actionbar = getSupportActionBar();
    actionbar.setDisplayHomeAsUpEnabled(true);
    actionbar.setHomeAsUpIndicator(R.drawable.ic_launcher);

so your icon will be used for Home / back
or

import android.support.v7.app.ActionBar;
import android.support.v7.app.AppCompatActivity;
...
    ActionBar actionbar = getSupportActionBar();
    actionbar.setDisplayShowHomeEnabled(true);
    actionbar.setIcon(R.drawable.ic_launcher);

for static icon

Here's a slight modification of Harry's answer that focuses on elevated status; I'm using this at the start of an install.bat file:

set IS_ELEVATED=0
whoami /groups | findstr /b /c:"Mandatory Label\High Mandatory Level" | findstr /c:"Enabled group" > nul: && set IS_ELEVATED=1
if %IS_ELEVATED%==0 (
    echo You must run the command prompt as administrator to install.
    exit /b 1
)

This definitely worked for me and the principle seems to be sound; from MSFT's Chris Jackson:

When you are running elevated, your token contains an ACE called Mandatory Label\High Mandatory Level.

The way to do this is by adding tabindex="-1". By adding this to a specific element, it becomes unreachable by the keyboard navigation. There is a great article here that will help you further understand tabindex.

Another solution:

^[1-9]\d*$

\d equivalent to [0-9]

All of the following assume that your cursor is on the first line:

Using normal mappings:

3Shift+J

Using Ex commands:

:,+2j

Which is an abbreviation of

:.,.+2 join

Which can also be entered by the following shortcut:

3:j

An even shorter Ex command:

:j3

Real mirror:

.mirror{_x000D_
    display: inline-block; _x000D_
    font-size: 30px;_x000D_
_x000D_
    -webkit-transform: matrix(-1, 0, 0, 1, 0, 0);_x000D_
    -moz-transform: matrix(-1, 0, 0, 1, 0, 0);_x000D_
    -o-transform: matrix(-1, 0, 0, 1, 0, 0);_x000D_
    transform: matrix(-1, 0, 0, 1, 0, 0);_x000D_
}

<span class='mirror'>Mirror Text<span>

None of the methods worked for me as i needed to pull the image from a folder instead of adding it to the application. The below code worked:

TestImage.Source = GetImage("/Content/Images/test.png")

private static BitmapImage GetImage(string imageUri)
{
    var bitmapImage = new BitmapImage();
    
    bitmapImage.BeginInit();
    bitmapImage.UriSource = new Uri("pack://siteoforigin:,,,/" + imageUri,             UriKind.RelativeOrAbsolute);
    bitmapImage.EndInit();
    
    return bitmapImage;
} 

 $mail->SMTPOptions = array(
        'ssl' => array(
            'verify_peer' => false,
            'verify_peer_name' => false,
            'allow_self_signed' => true
        )
    );

this is the pattern I would use

$string = preg_replace('@[\s]{2,}@',' ',$string);

Looking over the other answers it seems like there are a lot of things that can cause this error. Here is one more.

If you

• have a custom view
• added an @IBInspectable property
• and then later deleted it

Then you may also get an error similar to

Failed to set (xxx) user defined inspected property on [Your Custom View] ...: this class is not key value coding-compliant for the key [xxx].

The solution is to delete the the old property.

Open the Identity inspector for your class, select the property name under User Defined Runtime Attributes, and press the minus button (-).

babel 7 proposal can you add dev dependencies

npm i -D @babel/core @babel/preset-env @babel/register

and add a .babelrc in the root

{
"presets": [
  [
    "@babel/preset-env",
    {
      "targets": {
        "node": "current"
     }
    }
  ]
 ]
}

and add to the .js file

require("@babel/register")

or if you run it in the cli, you could use the require hook as -r @babel/register, ex.

$node -r @babel/register executeMyFileWithESModules.js

Below are two methods that are superior to looping. Both handle a "no-find" case.

1. The VBA equivalent of a normal function VLOOKUP with error-handling if the variable doesn't exist (INDEX/MATCH may be a better route than VLOOKUP, ie if your two columns A and B were in reverse order, or were far apart)

2. VBAs FIND method (matching a whole string in column A given I use the xlWhole argument)

   Sub Method1()
   Dim strSearch As String
   Dim strOut As String
   Dim bFailed As Boolean
   
   strSearch = "trees"
   
   On Error Resume Next
   strOut = Application.WorksheetFunction.VLookup(strSearch, Range("A:B"), 2, False)
   If Err.Number <> 0 Then bFailed = True
   On Error GoTo 0
   
   If Not bFailed Then
   MsgBox "corresponding value is " & vbNewLine & strOut
   Else
   MsgBox strSearch & " not found"
   End If
   End Sub
   
   Sub Method2()
       Dim rng1 As Range
       Dim strSearch As String
       strSearch = "trees"
       Set rng1 = Range("A:A").Find(strSearch, , xlValues, xlWhole)
       If Not rng1 Is Nothing Then
           MsgBox "Find has matched " & strSearch & vbNewLine & "corresponding cell is " & rng1.Offset(0, 1)
       Else
           MsgBox strSearch & " not found"
       End If
   End Sub
   

You can do :

document.forms["loginForm"].submit()

But this won't call the onclick action of your button, so you will need to call it by hand.

Be aware that you must use the name of your form and not the id to access it.

building on these answers - i also had to modify an X86 reference under Librarian -> Command Line -> Additional Options (for the x64 Platform)

In addition to what @berguiga-mohamed-amine stated, I just found that a wildcard requires leaving the module argument the empty string:

compile ("com.github.jsonld-java:jsonld-java:$jsonldJavaVersion") {
    exclude group: 'org.apache.httpcomponents', module: ''
    exclude group: 'org.slf4j', module: ''
}

I had to add:

secureTextEntry={true}

Along with

password={true}

As of 0.55

This would work fine.

Push-Location $PSScriptRoot

Write-Host CurrentDirectory $CurDir

SVG 1.2 Tiny has viewport-fill I'm not sure how widely implemented this property is though as most browsers are targetting SVG 1.1 at this time. Opera implements it FWIW.

A more cross-browser solution currently would be to stick a <rect> element with width and height of 100% and fill="red" as the first child of the <svg> element, for example:

<rect width="100%" height="100%" fill="red"/>

Can't install RMagick 2.13.2. in ubuntu 17.10

My decision

 - sudo apt-get purge imagemagick libmagickcore-dev libmagickwand-dev
 - sudo apt-get autoremove
 - sudo rm /usr/bin/Magick-config

 - sudo apt-get install imagemagick libmagickwand-dev

Version is required to correctly specify the path to the configuration

• cd /usr/lib/x86_64-linux-gnu
• View version ImageMagick, my version ImageMagick - 6.9.7.
• cd ImageMagick-6.9.7/
• ls
• look at the name of the directory bin-q16 or bin-Q16

Creating a link to the config

sudo ln -s /usr/lib/x86_64-linux-gnu/ImageMagick-version/bin-directory/Magick-config /usr/bin/Magick-config

Creating for my version ImageMagick

 - sudo ln -s /usr/lib/x86_64-linux-gnu/ImageMagick-6.9.7/bin-q16/Magick-config /usr/bin/Magick-config
 - bundle

This does it in text.

<p> The download will begin in <span id="countdowntimer">10 </span> Seconds</p>_x000D_
_x000D_
<script type="text/javascript">_x000D_
    var timeleft = 10;_x000D_
    var downloadTimer = setInterval(function(){_x000D_
    timeleft--;_x000D_
    document.getElementById("countdowntimer").textContent = timeleft;_x000D_
    if(timeleft <= 0)_x000D_
        clearInterval(downloadTimer);_x000D_
    },1000);_x000D_
</script>

another way which, at least to me, seems more intuitive:

target.write('''line 1
line 2
line 3''')

Here is a Gmail API example. Although more complicated, this is the only method I found that works in 2019. This example was taken and modified from:

https://developers.google.com/gmail/api/guides/sending

You'll need create a project with Google's API interfaces through their website. Next you'll need to enable the GMAIL API for your app. Create credentials and then download those creds, save it as credentials.json.

import pickle
import os.path
from googleapiclient.discovery import build
from google_auth_oauthlib.flow import InstalledAppFlow
from google.auth.transport.requests import Request

from email.mime.text import MIMEText
import base64

#pip install --upgrade google-api-python-client google-auth-httplib2 google-auth-oauthlib

# If modifying these scopes, delete the file token.pickle.
SCOPES = ['https://www.googleapis.com/auth/gmail.readonly', 'https://www.googleapis.com/auth/gmail.send']

def create_message(sender, to, subject, msg):
    message = MIMEText(msg)
    message['to'] = to
    message['from'] = sender
    message['subject'] = subject

    # Base 64 encode
    b64_bytes = base64.urlsafe_b64encode(message.as_bytes())
    b64_string = b64_bytes.decode()
    return {'raw': b64_string}
    #return {'raw': base64.urlsafe_b64encode(message.as_string())}

def send_message(service, user_id, message):
    #try:
    message = (service.users().messages().send(userId=user_id, body=message).execute())
    print( 'Message Id: %s' % message['id'] )
    return message
    #except errors.HttpError, error:print( 'An error occurred: %s' % error )

def main():
    """Shows basic usage of the Gmail API.
    Lists the user's Gmail labels.
    """
    creds = None
    # The file token.pickle stores the user's access and refresh tokens, and is
    # created automatically when the authorization flow completes for the first
    # time.
    if os.path.exists('token.pickle'):
        with open('token.pickle', 'rb') as token:
            creds = pickle.load(token)
    # If there are no (valid) credentials available, let the user log in.
    if not creds or not creds.valid:
        if creds and creds.expired and creds.refresh_token:
            creds.refresh(Request())
        else:
            flow = InstalledAppFlow.from_client_secrets_file(
                'credentials.json', SCOPES)
            creds = flow.run_local_server(port=0)
        # Save the credentials for the next run
        with open('token.pickle', 'wb') as token:
            pickle.dump(creds, token)

    service = build('gmail', 'v1', credentials=creds)

    # Example read operation
    results = service.users().labels().list(userId='me').execute()
    labels = results.get('labels', [])

    if not labels:
        print('No labels found.')
    else:
        print('Labels:')
    for label in labels:
        print(label['name'])

    # Example write
    msg = create_message("[email protected]", "[email protected]", "Subject", "Msg")
    send_message( service, 'me', msg)

if __name__ == '__main__':
    main()

Yes, it is definitely possible using Javascript Result:

return JavaScript("Callback()");

Javascript should be referenced by your view:

function Callback(){
    // do something where you can call an action method in controller to pass some data via AJAX() request
}

I used the Debug "app" button
and my problem was solved

In the sample, we are creating two datetime objects, one with current time and another one with 75 seconds added to the current time. Then we will call the method .Subtract() on the second DateTime object. This will return a TimeSpan object. Once we get the TimeSpan object, we can use the properties of TimeSpan to get the actual Hours, Minutes and Seconds.

DateTime startTime = DateTime.Now;

 DateTime endTime = DateTime.Now.AddSeconds( 75 );

 TimeSpan span = endTime.Subtract ( startTime );
 Console.WriteLine( "Time Difference (seconds): " + span.Seconds );
 Console.WriteLine( "Time Difference (minutes): " + span.Minutes );
 Console.WriteLine( "Time Difference (hours): " + span.Hours );
 Console.WriteLine( "Time Difference (days): " + span.Days );

Result:

Time Difference (seconds): 15
Time Difference (minutes): 1
Time Difference (hours): 0
Time Difference (days): 0

This worked for me.

sed -e 's/\s\+/,/g' input.txt >> output.csv

I had a similar issue for setting proxy server on a container.

The solution I'm using is an entrypoint script, and another script for environment variables configuration. Using RUN, you assure the configuration script runs on build, and ENTRYPOINT when you run the container.

--build-arg is used on command line to set proxy user and password.

As I need the same environment variables on container startup, I used a file to "persist" it from build to run.

The entrypoint script looks like:

#!/bin/bash
# Load the script of environment variables
. /root/configproxy.sh
# Run the main container command
exec "$@"

configproxy.sh

#!/bin/bash

function start_config {
read u p < /root/proxy_credentials

export HTTP_PROXY=http://$u:[email protected]:8080
export HTTPS_PROXY=https://$u:[email protected]:8080

/bin/cat <<EOF > /etc/apt/apt.conf 
Acquire::http::proxy "http://$u:[email protected]:8080";
Acquire::https::proxy "https://$u:[email protected]:8080";
EOF
}

if [ -s "/root/proxy_credentials" ]
then
start_config
fi

And in the Dockerfile, configure:

# Base Image
FROM ubuntu:18.04

ARG user
ARG pass

USER root

# -z the length of STRING is zero
# [] are an alias for test command
# if $user is not empty, write credentials file
RUN if [ ! -z "$user" ]; then echo "${user} ${pass}">/root/proxy_credentials ; fi

#copy bash scripts
COPY configproxy.sh /root
COPY startup.sh .

RUN ["/bin/bash", "-c", ". /root/configproxy.sh"]

# Install dependencies and tools
#RUN apt-get update -y && \
#    apt-get install -yqq --no-install-recommends \
#    vim iputils-ping

ENTRYPOINT ["./startup.sh"]
CMD ["sh", "-c", "bash"]

Build without proxy settings

docker build -t img01 -f Dockerfile . 

Build with proxy settings

docker build -t img01 --build-arg user=<USER> --build-arg pass=<PASS> -f Dockerfile . 

Take a look here.

Use animation-delay:

div {
    width: 100px;
    height: 100px;
    background: red;
    opacity: 0;

    animation: fadeIn 3s;
    animation-delay: 5s;
    animation-fill-mode: forwards;
}

@keyframes fadeIn {
    from { opacity: 0; }
    to { opacity: 1; }
}

Fiddle

Instead of using the placeholder text, you'll want to set the actual text property of the field to MM/YYYY, set the delegate of the text field and listen for this method:

- (BOOL)textField:(UITextField *)textField shouldChangeCharactersInRange:(NSRange)range replacementString:(NSString *)string {     // update the text of the label } 

Inside that method, you can figure out what the user has typed as they type, which will allow you to update the label accordingly.

JavaScript Pure:

<script type="text/javascript">
document.getElementById("modal").click();
</script>

JQuery:

<script type="text/javascript">
$(document).ready(function(){
    $("#modal").trigger('click'); 
});
</script>

or

<script type="text/javascript">
$(document).ready(function(){
    $("#modal").click(); 
});
</script>

True CSS with proper semantic and accessibility settings.

It is a <button>, It has text for screen readers.

https://codepen.io/specialweb/pen/ExyWPYv?editors=1100

button {
  width: 2rem;
  height: 2rem;
  padding: 0;
  position: absolute;
  top: 1rem;
  right: 1rem;
  cursor: pointer;
}

.sr-only {
  position: absolute;
  width: 1px;
  height: 1px;
  padding: 0;
  margin: -1px;
  overflow: hidden;
  clip: rect(0,0,0,0);
  border: 0;
}

button::before,
button::after {
    content: '';
    width: 1px;
    height: 100%;
    background: #333;
    display: block;
    transform: rotate(45deg) translateX(0px);
    position: absolute;
    left: 50%;
    top: 0;
}

button::after {
    transform: rotate(-45deg) translateX(0px);
}


/* demo */
body {
  background: black;
}
.pane {
  margin: 0 auto;
  width: 50vw;
  min-height: 50vh;
  background: #FFF;
  position: relative;
  border-radius: 5px;
}

<div class="pane">
  <button type="button"><span class="sr-only">Close</span></button>
</div>

You can put the condition after the WHEN clause, like so:

SELECT
  CASE
    WHEN PAT_ENT.SCR_DT is not null and PAT_ENTRY.ELIGIBILITY is null THEN 'Favor'
    WHEN PAT_ENT.SCR_DT is not null and PAT_ENTRY.EL = 'No' THEN 'Error'
    WHEN PAT_ENTRY.EL = 'Yes' and ISNULL(DS.DES, 'OFF') = 'OFF' THEN 'Active'
    WHEN DS.DES = 'N' THEN 'Early Term'
    WHEN DS.DES = 'Y' THEN 'Complete'
  END
FROM
  ....

Of course, the argument could be made that complex rules like this belong in your business logic layer, not in a stored procedure in the database...

byte[] array = Encoding.ASCII.GetBytes("MyTest1 - MyTest2");
MemoryStream streamItem = new MemoryStream(array);

// convert to string
StreamReader reader = new StreamReader(streamItem);
string text = reader.ReadToEnd();

set.seed(1)
example <- data.frame(col1 = rnorm(10, 0, 1), col2 = rnorm(10, 2, 3))
namevector <- c("col3", "col4")
example[ , namevector] <- NA

example
#          col1       col2 col3 col4
# 1  -0.6264538  6.5353435   NA   NA
# 2   0.1836433  3.1695297   NA   NA
# 3  -0.8356286  0.1362783   NA   NA
# 4   1.5952808 -4.6440997   NA   NA
# 5   0.3295078  5.3747928   NA   NA
# 6  -0.8204684  1.8651992   NA   NA
# 7   0.4874291  1.9514292   NA   NA
# 8   0.7383247  4.8315086   NA   NA
# 9   0.5757814  4.4636636   NA   NA
# 10 -0.3053884  3.7817040   NA   NA

After hours of debugging I could only get this to work using the following packages:

requests[security]==2.7.0  # not 2.18.1
cryptography==1.9  # not 2.0

using OpenSSL 1.0.2g 1 Mar 2016

Without these packages verify=False was not working.

I hope this helps someone.

Thanks, that helped me. I made some improvements and wrapped that in a helper script "finalurl":

#!/bin/bash
curl $1 -s -L -I -o /dev/null -w '%{url_effective}'

• -o output to /dev/null
• -I don't actually download, just discover the final URL
• -s silent mode, no progressbars

This made it possible to call the command from other scripts like this:

echo `finalurl http://someurl/`

react-navigation versions >= 1.0.0-beta.9

navigationOptions:  {
   headerLeft: null
}