for php version 5.2.17 __DIR__ will not work it will only works with php 5.3

But for older version of php dirname(__FILE__) perfectly

For example write like this

require_once dirname(__FILE__) . '/db_config.php';

Use

• require
  when the file is required by your application, e.g. an important message template or a file containing configuration variables without which the app would break.

• require_once
  when the file contains content that would produce an error on subsequent inclusion, e.g. function important() { /* important code */} is definitely needed in your application but since functions cannot be redeclared should not be included again.

• include when the file is not required and application flow should continue when not found, e.g.
  great for templates referencing variables from the current scope or something

• include_once
  optional dependencies that would produce errors on subsequent loading or maybe remote file inclusion that you do not want to happen twice due to the HTTP overhead

But basically, it's up to you when to use which.

How about something like this?

SELECT D.DeptName FROM
Department D WHERE (SELECT COUNT(*) 
                    FROM Employee E 
                    WHERE E.DeptID = D.DeptID AND
                            E.Salary > 1000) > 2

Here's another way of doing it with a WHS script:

Set objWMIService = GetObject("Winmgmts:root\cimv2")

For Each objComputer in _
    objWMIService.InstancesOf("Win32_ComputerSystem")

    objComputer.rename "NewComputerName", NULL, NULL 
Next

Source

this might be repetitive. I was trying to use pycharm to run flask - had anaconda 3, pycharm 2019.1.1 and windows 10. Created a new conda environment - it threw errors. Followed these steps -

1. Used the cmd to install python and flask after creating environment as suggested above.

2. Followed this answer.

3. As suggested above, went to Run -> Edit Configurations and changed the environment there as well as in (2).

Obviously kept the correct python interpreter (the one in the environment) everywhere.

If you want formatted text, chain your commands with echo and use $0 to print the last field.

Example:

for i in {8..11}; do
   s1="$i"
   s2="str$i"
   s3="str with spaces $i"
   echo -n "$s1 $s2" | awk '{printf "|%3d|%6s",$1,$2}'
   echo -en "$s3" | awk '{printf "|%-19s|\n", $0}'
done

Prints:

|  8|  str8|str with spaces 8  |
|  9|  str9|str with spaces 9  |
| 10| str10|str with spaces 10 |
| 11| str11|str with spaces 11 |

Adding productFlavors{} to the app build.gradle solved the issue for me. See below:

buildTypes {
        release {
             ...
        }
    }
productFlavors {
    }

Can't you just create a static method that does exactly this?

private static <K, V> V getOrDefault(Map<K,V> map, K key, V defaultValue) {
    return map.containsKey(key) ? map.get(key) : defaultValue;
}

A simpler SHA-1 method: (updated from the commenter's suggestions, also using a massively more efficient byte->string algorithm)

String sha1Hash( String toHash )
{
    String hash = null;
    try
    {
        MessageDigest digest = MessageDigest.getInstance( "SHA-1" );
        byte[] bytes = toHash.getBytes("UTF-8");
        digest.update(bytes, 0, bytes.length);
        bytes = digest.digest();

        // This is ~55x faster than looping and String.formating()
        hash = bytesToHex( bytes );
    }
    catch( NoSuchAlgorithmException e )
    {
        e.printStackTrace();
    }
    catch( UnsupportedEncodingException e )
    {
        e.printStackTrace();
    }
    return hash;
}

// http://stackoverflow.com/questions/9655181/convert-from-byte-array-to-hex-string-in-java
final protected static char[] hexArray = "0123456789ABCDEF".toCharArray();
public static String bytesToHex( byte[] bytes )
{
    char[] hexChars = new char[ bytes.length * 2 ];
    for( int j = 0; j < bytes.length; j++ )
    {
        int v = bytes[ j ] & 0xFF;
        hexChars[ j * 2 ] = hexArray[ v >>> 4 ];
        hexChars[ j * 2 + 1 ] = hexArray[ v & 0x0F ];
    }
    return new String( hexChars );
}

The obvious answer to this is "that's what the JLS says."

Thinking about why that is, consider that this behavior can be useful in certain cases. Let's say you want to check a string against a set of other strings, but the number of other strings can vary.

So you have something like this:

for(String s : myStrings) {
   check(aString.contains(s));
}

where some s's are empty strings.

If the empty string is interpreted as "no input," and if your purpose here is ensure that aString contains all the "inputs" in myStrings, then it is misleading for the empty string to return false. All strings contain it because it is nothing. To say they didn't contain it would imply that the empty string had some substance that was not captured in the string, which is false.

@Howard Hinnant's answer is both correct and comprehensive. But it might be misunderstood if it's read too quickly, because std::terminate() (whole process) happens to have the same name as the "terminating" that @Alexander V had in mind (1 thread).

Summary: "terminate 1 thread + forcefully (target thread doesn't cooperate) + pure C++11 = No way."

This is how to do it using Java 8+ :

boolean isJohnAlive = list.stream().anyMatch(o -> o.getName().equals("John"));

Make sure that the RSA host key and the IP of the bitbucket server is added to the 'known hosts' file. The contents should look like

bitbucket.org,xx.xx.xx.xx ssh-rsa host_key

Remember to change ownership to Jenkins for all the files in /var/lib/jenkins/.ssh/

Here is my code:

* * * * * your_script_fullpath >> your_log_path 2>&1

This worked for me:

set(SOURCE main.cpp)
add_executable(${PROJECT_NAME} ${SOURCE})

# target_include_directories must be added AFTER add_executable
target_include_directories(${PROJECT_NAME} PUBLIC ${INTERNAL_INCLUDES})

You can change the index as explained already using set_index. You don't need to manually swap rows with columns, there is a transpose (data.T) method in pandas that does it for you:

> df = pd.DataFrame([['ABBOTSFORD', 427000, 448000],
                    ['ABERFELDIE', 534000, 600000]],
                    columns=['Locality', 2005, 2006])

> newdf = df.set_index('Locality').T
> newdf

Locality    ABBOTSFORD  ABERFELDIE
2005        427000      534000
2006        448000      600000

then you can fetch the dataframe column values and transform them to a list:

> newdf['ABBOTSFORD'].values.tolist()

[427000, 448000]

Use:

System.Configuration.ConfigurationSettings.AppSettings["MyKey"];

AppSettings has been deprecated and is now considered obsolete (link).

In addition, the appSettings section of the app.config has been replaced by the applicationSettings section.

As someone else mentioned, you should be using System.Configuration.ConfigurationManager (link) which is new for .NET 2.0.

another option is to use regex. The following code makes the search insensitive to upper/lower case:

bool endsWithIgnoreCase(const std::string& str, const std::string& suffix) {
  return std::regex_search(str,
     std::regex(std::string(suffix) + "$", std::regex_constants::icase));
}

probably not so efficient, but easy to implement.

In my case, setting SQL Server Database Engine service startup account to NT AUTHORITY\NETWORK SERVICE failed, but setting it to NT Authority\System allowed me to succesfully install my SQL Server 2016 STD instance.

Just check the following snapshot.

For further details, check @Shanky's answer at https://dba.stackexchange.com/a/71798/66179

Remember: you can avoid server rebooting using setup's SkipRules switch:

setup.exe /ACTION=INSTALL /SkipRules=RebootRequiredCheck

setup.exe /ACTION=UNINSTALL /SkipRules=RebootRequiredCheck

I think you have to draw the listitems yourself to achieve this.

Here's a post with the same kind of question.

Please read the $.ajax documentation, this is a covered topic.

$.ajax({
    url: "test.html",
    error: function(){
        // will fire when timeout is reached
    },
    success: function(){
        //do something
    },
    timeout: 3000 // sets timeout to 3 seconds
});

You can get see what type of error was thrown by accessing the textStatus parameter of the error: function(jqXHR, textStatus, errorThrown) option. The options are "timeout", "error", "abort", and "parsererror".

For a tree with ordered children, I'd usually do something kind of like this (though a little less generic, tailored to what I'm doing):

class TreeNode(list):

    def __init__(self, iterable=(), **attributes):
        self.attr = attributes
        list.__init__(self, iterable)

    def __repr__(self):
        return '%s(%s, %r)' % (type(self).__name__, list.__repr__(self),
            self.attr)

You could do something comparable with a dict or using DictMixin or it's more modern descendants if you want unordered children accessed by key.

Try the -HideTableHeaders parameter to Format-Table:

gci | ft -HideTableHeaders

(I'm using PowerShell v2. I don't know if this was in v1.)

I don't think mongodb supports this type of selective upserting. I have the same problem as LeMiz, and using update(criteria, newObj, upsert, multi) doesn't work right when dealing with both a 'created' and 'updated' timestamp. Given the following upsert statement:

update( { "name": "abc" }, 
        { $set: { "created": "2010-07-14 11:11:11", 
                  "updated": "2010-07-14 11:11:11" }},
        true, true ) 

Scenario #1 - document with 'name' of 'abc' does not exist: New document is created with 'name' = 'abc', 'created' = 2010-07-14 11:11:11, and 'updated' = 2010-07-14 11:11:11.

Scenario #2 - document with 'name' of 'abc' already exists with the following: 'name' = 'abc', 'created' = 2010-07-12 09:09:09, and 'updated' = 2010-07-13 10:10:10. After the upsert, the document would now be the same as the result in scenario #1. There's no way to specify in an upsert which fields be set if inserting, and which fields be left alone if updating.

My solution was to create a unique index on the critera fields, perform an insert, and immediately afterward perform an update just on the 'updated' field.

THis issue has been fixed with new mysql connectors, please use http://mvnrepository.com/artifact/mysql/mysql-connector-java/5.1.38

I used to get this error after updating the connector jar, issue resolved.

        var app = angular.module('plunkr', [])
    app.controller('UploadController', function($scope, fileReader) {
        $scope.imageSrc = "";

        $scope.$on("fileProgress", function(e, progress) {
        $scope.progress = progress.loaded / progress.total;
        });
    });




    app.directive("ngFileSelect", function(fileReader, $timeout) {
        return {
        scope: {
            ngModel: '='
        },
        link: function($scope, el) {
            function getFile(file) {
            fileReader.readAsDataUrl(file, $scope)
                .then(function(result) {
                $timeout(function() {
                    $scope.ngModel = result;
                });
                });
            }

            el.bind("change", function(e) {
            var file = (e.srcElement || e.target).files[0];
            getFile(file);
            });
        }
        };
    });

    app.factory("fileReader", function($q, $log) {
    var onLoad = function(reader, deferred, scope) {
        return function() {
        scope.$apply(function() {
            deferred.resolve(reader.result);
        });
        };
    };

    var onError = function(reader, deferred, scope) {
        return function() {
        scope.$apply(function() {
            deferred.reject(reader.result);
        });
        };
    };

    var onProgress = function(reader, scope) {
        return function(event) {
        scope.$broadcast("fileProgress", {
            total: event.total,
            loaded: event.loaded
        });
        };
    };

    var getReader = function(deferred, scope) {
        var reader = new FileReader();
        reader.onload = onLoad(reader, deferred, scope);
        reader.onerror = onError(reader, deferred, scope);
        reader.onprogress = onProgress(reader, scope);
        return reader;
    };

    var readAsDataURL = function(file, scope) {
        var deferred = $q.defer();

        var reader = getReader(deferred, scope);
        reader.readAsDataURL(file);

        return deferred.promise;
    };

    return {
        readAsDataUrl: readAsDataURL
    };
    });



    *************** CSS ****************

    img{width:200px; height:200px;}

    ************** HTML ****************

    <div ng-app="app">
    <div ng-controller="UploadController ">
        <form>
        <input type="file" ng-file-select="onFileSelect($files)" ng-model="imageSrc">
                <input type="file" ng-file-select="onFileSelect($files)" ng-model="imageSrc2">
        <!--  <input type="file" ng-file-select="onFileSelect($files)" multiple> -->
        </form>

        <img ng-src="{{imageSrc}}" />
    <img ng-src="{{imageSrc2}}" />

    </div>
    </div>

whats actually wrong with:

input { border: 1px solid #f00; }

do you only want it on inputs with errors? in that case give the input a class of error...

input.error { border: 1px solid #f00; }

An easy way I'm using:

file_put_contents($output_file, file_get_contents($base64_string));

This works well because file_get_contents can read data from a URI, including a data:// URI.

<script type="text/javascript">
$(document).ready(function() {
    $('#upload').bind("click",function() 
    { 
        var imgVal = $('#uploadImage').val(); 
        if(imgVal=='') 
        { 
            alert("empty input file"); 

        } 
        return false; 

    }); 
});
</script> 

<input type="file" name="image" id="uploadImage" size="30" /> 
<input type="submit" name="upload" id="upload"  class="send_upload" value="upload" /> 

Rather than trying to output to the console, Log will output to LogCat which you can find in Eclipse by going to: Window->Show View->Other…->Android->LogCat

Have a look at the reference for Log.

The benefits of using LogCat are that you can print different colours depending on your log type, e.g.: Log.d prints blue, Log.e prints orange. Also you can filter by log tag, log message, process id and/or by application name. This is really useful when you just want to see your app's logs and keep the other system stuff separate.

A stateful server keeps state between connections. A stateless server does not.

So, when you send a request to a stateful server, it may create some kind of connection object that tracks what information you request. When you send another request, that request operates on the state from the previous request. So you can send a request to "open" something. And then you can send a request to "close" it later. In-between the two requests, that thing is "open" on the server.

When you send a request to a stateless server, it does not create any objects that track information regarding your requests. If you "open" something on the server, the server retains no information at all that you have something open. A "close" operation would make no sense, since there would be nothing to close.

HTTP and NFS are stateless protocols. Each request stands on its own.

Sometimes cookies are used to add some state to a stateless protocol. In HTTP (web pages), the server sends you a cookie and then the browser holds the state, only to send it back to the server on a subsequent request.

SMB is a stateful protocol. A client can open a file on the server, and the server may deny other clients access to that file until the client closes it.

It is possible.

When you use Return inside a procedure, the control is transferred to the calling program which calls the procedure. It is like an exit in loops.

It won't return any value.

Apparently GitHub now offer git training courses to companies. Quoth their blog post about it:

I’ve been down to the Google campus a number of times in the last few weeks helping to train the Androids there in Git. I was asked by Shawn Pearce (you may know him from his Git and EGit/JGit glory – he is the hero that takes over maintanance when Junio is out of town) to come in to help him train the Google engineers working on Andriod in transitioning from Perforce to Git, so Android could be shared with the masses. I can tell you I was more than happy to do it.

[…]

Logical Awesome is now officially offering this type of custom training service to all companies, where we can help your organization with training and planning if you are thinking about switching to Git as well.

Emphasis mine.

You can create a pre-filled form URL from within the Form Editor, as described in the documentation for Drive Forms. You'll end up with a URL like this, for example:

https://docs.google.com/forms/d/--form-id--/viewform?entry.726721210=Mike+Jones&entry.787184751=1975-05-09&entry.1381372492&entry.960923899

buildUrls()

In this example, question 1, "Name", has an ID of 726721210, while question 2, "Birthday" is 787184751. Questions 3 and 4 are blank.

You could generate the pre-filled URL by adapting the one provided through the UI to be a template, like this:

function buildUrls() {
  var template = "https://docs.google.com/forms/d/--form-id--/viewform?entry.726721210=##Name##&entry.787184751=##Birthday##&entry.1381372492&entry.960923899";
  var ss = SpreadsheetApp.getActive().getSheetByName("Sheet1");  // Email, Name, Birthday
  var data = ss.getDataRange().getValues();

  // Skip headers, then build URLs for each row in Sheet1.
  for (var i = 1; i < data.length; i++ ) {
    var url = template.replace('##Name##',escape(data[i][1]))
                      .replace('##Birthday##',data[i][2].yyyymmdd());  // see yyyymmdd below
    Logger.log(url);  // You could do something more useful here.
  }
};

This is effective enough - you could email the pre-filled URL to each person, and they'd have some questions already filled in.

betterBuildUrls()

Instead of creating our template using brute force, we can piece it together programmatically. This will have the advantage that we can re-use the code without needing to remember to change the template.

Each question in a form is an item. For this example, let's assume the form has only 4 questions, as you've described them. Item [0] is "Name", [1] is "Birthday", and so on.

We can create a form response, which we won't submit - instead, we'll partially complete the form, only to get the pre-filled form URL. Since the Forms API understands the data types of each item, we can avoid manipulating the string format of dates and other types, which simplifies our code somewhat.

(EDIT: There's a more general version of this in How to prefill Google form checkboxes?)

/**
 * Use Form API to generate pre-filled form URLs
 */
function betterBuildUrls() {
  var ss = SpreadsheetApp.getActive();
  var sheet = ss.getSheetByName("Sheet1");
  var data = ss.getDataRange().getValues();  // Data for pre-fill

  var formUrl = ss.getFormUrl();             // Use form attached to sheet
  var form = FormApp.openByUrl(formUrl);
  var items = form.getItems();

  // Skip headers, then build URLs for each row in Sheet1.
  for (var i = 1; i < data.length; i++ ) {
    // Create a form response object, and prefill it
    var formResponse = form.createResponse();

    // Prefill Name
    var formItem = items[0].asTextItem();
    var response = formItem.createResponse(data[i][1]);
    formResponse.withItemResponse(response);

    // Prefill Birthday
    formItem = items[1].asDateItem();
    response = formItem.createResponse(data[i][2]);
    formResponse.withItemResponse(response);

    // Get prefilled form URL
    var url = formResponse.toPrefilledUrl();
    Logger.log(url);  // You could do something more useful here.
  }
};

yymmdd Function

Any date item in the pre-filled form URL is expected to be in this format: yyyy-mm-dd. This helper function extends the Date object with a new method to handle the conversion.

When reading dates from a spreadsheet, you'll end up with a javascript Date object, as long as the format of the data is recognizable as a date. (Your example is not recognizable, so instead of May 9th 1975 you could use 5/9/1975.)

// From http://blog.justin.kelly.org.au/simple-javascript-function-to-format-the-date-as-yyyy-mm-dd/
Date.prototype.yyyymmdd = function() {
  var yyyy = this.getFullYear().toString();                                    
  var mm = (this.getMonth()+1).toString(); // getMonth() is zero-based         
  var dd  = this.getDate().toString();             

  return yyyy + '-' + (mm[1]?mm:"0"+mm[0]) + '-' + (dd[1]?dd:"0"+dd[0]);
};

Try this as it worked for me...

1. Go to "Start" -> "Run" and enter "dcomcnfg"
2. This will bring up the component services window, expand out "Console Root" -> "Computers" -> "DCOM Config"
3. Find "Microsoft Excel Application" in the list of components.
4. Right click on the entry and select "Properties"
5. Go to the "Identity" tab on the properties dialog.
6. Select "The interactive user."

courtesy of Last paragraph mentioned in here

Ben Voigt found the best solution in a comment-reply above:

private void dgvStandingOrder_CurrentCellDirtyStateChanged(object sender, EventArgs e)
{
    if (dgvStandingOrder.CurrentCell is DataGridViewCheckBoxCell)
        dgvStandingOrder.CommitEdit(DataGridViewDataErrorContexts.Commit);
}

Seriously, that's ALL you need.

file_path = "/path/to/yourfile.txt"
with open(file_path, 'a') as file:
    file.write("This will be added to the next line\n")

or

log_file = open('log.txt', 'a')
log_file.write("This will be added to the next line\n")

You need something like a regular expression.

You have to be in Extended mode

If you want all the lines to end up on a single line use \r\n. If you want to simply remove empty lines, use \n\r as @Link originally suggested.

Replace either expression with nothing.

Here is a simple way to loop any number of times in PowerShell.

It is the same as the for loop above, but much easier to understand for newer programmers and scripters. It uses a range, and foreach. A range is defined as:

range = lower..upper

or

$range = 1..10

A range can be used directly in a for loop as well, although not the most optimal approach, any performance loss or additional instruction to process would be unnoticeable. The solution is below:

foreach($i in 1..10){
    Write-Host $i
}

Or in your case:

$ActiveCampaigns = 10
foreach($i in 1..$ActiveCampaigns)
{
    Write-Host $i
    If($i==$ActiveCampaigns){
        // Do your stuff on the last iteration here
    }
}

Why not simply call each function inside the first (and only) loop just after they were created, such as:

 var funcs = [];
    for (var i = 0; i < 3; i++) {
    // let's create 3 functions
    funcs[i] = function() {
    // and store them in funcs
    console.log("My value: " + i); // each should log its value.
    };
    funcs[i]();// and now let's run each one to see
    }

See that the tomcat you are using is compatible with the Java version. For me the issue was Tomcat-9 required Java-8. If you have a older version of Java, you could use Tomcat-7 to test.

mysql_query("SHOW TABLES FROM yourDB");
//> loop thru results and see if it exists
//> in this way with only one query one can check easly more table 

or mysql_query("SHOW TABLES LIKE 'tblname'");

Don't use mysql_list_tables(); because it's deprecated

As other folks already mention, I will suggest not to use "sudo apt-get" to install node or any development library. You can download required version from https://nodejs.org/dist/v6.9.2/ and setup you own environment.

I will recommend tools like nvm and n, to manage you node version. It is very convenient to switch and work with these modules. https://github.com/creationix/nvm https://github.com/tj/n

Or write basic bash to download zip/tar, extract move folder and create a soft link. Whenever you need to update, just point the old soft link to new downloaded version. Like I have created for my own, you can refer: https://github.com/deepakshrma/NodeJs-4.0-Reference-Guide/blob/master/nodejs-installer.sh

#Go to home
cd ~
#run command
#New Script
wget https://raw.githubusercontent.com/deepakshrma/NodeJs-4.0-Reference-Guide/master/nodejs-installer.sh 
bash nodejs-installer.sh -v lts
#here -v or --version can be sepecific to 0.10.37 or it could be latest/lts 
#Examples
bash nodejs-installer.sh -v lts
bash nodejs-installer.sh -v latest
bash nodejs-installer.sh -v 4.4.2

The key is to use "Content-Type": "text/plain" as mentioned by @MadhuBhat.

axios.post(path, code, { headers: { "Content-Type": "text/plain" } }).then(response => {
    console.log(response);
});

A thing to note if you use .NET is that a raw string to a controller will return 415 Unsupported Media Type. To get around this you need to encapsulate the raw string in hyphens like this and send it as "Content-Type": "application/json":

axios.post(path, "\"" + code + "\"", { headers: { "Content-Type": "application/json" } }).then(response => {
    console.log(response);
});

C# Controller:

[HttpPost]
public async Task<ActionResult<string>> Post([FromBody] string code)
{
    return Ok(code);
}

https://weblog.west-wind.com/posts/2017/sep/14/accepting-raw-request-body-content-in-aspnet-core-api-controllers

You can also make a POST with query params if that helps:

.post(`/mails/users/sendVerificationMail`, null, { params: {
  mail,
  firstname
}})
.then(response => response.status)
.catch(err => console.warn(err));

This will POST an empty body with the two query params:

POST http://localhost:8000/api/mails/users/sendVerificationMail?mail=lol%40lol.com&firstname=myFirstName

Source: https://stackoverflow.com/a/53501339/3850405

You're applying transitions only to the :hover pseudo-class, and not to the element itself.

.item {   
  height:200px;
  width:200px;
  background:red; 
  -webkit-transition: opacity 1s ease-in-out;
  -moz-transition: opacity 1s ease-in-out;
  -ms-transition: opacity 1s ease-in-out;
  -o-transition: opacity 1s ease-in-out;
  transition: opacity 1s ease-in-out;
}

.item:hover {
  zoom: 1;
  filter: alpha(opacity=50);
  opacity: 0.5;
}

Demo: http://jsfiddle.net/7uR8z/6/

If you don't want the transition to affect the mouse-over event, but only mouse-out, you can turn transitions off for the :hover state :

.item:hover {
  -webkit-transition: none;
  -moz-transition: none;
  -ms-transition: none;
  -o-transition: none;
  transition: none;
  zoom: 1;
  filter: alpha(opacity=50);
  opacity: 0.5;
}

Demo: http://jsfiddle.net/7uR8z/3/

Function firstBlankRow() As Long
Dim emptyCells As Boolean

    For Each rowinC In Sheet7.Range("A" & currentEmptyRow & ":A5000")   ' (row,col)

        If rowinC.Value = "" Then
            currentEmptyRow = rowinC.row
            'firstBlankRow = rowinC.row 'define class variable to simplify computing complexity for other functions i.e. no need to call function again
            Exit Function   
        End If
    Next

End Function

The cex parameter will do that for you.

a <- c(3, 2, 2, 2, 1, 2 )
barplot(a, beside = T,
        col = 1:6, space = c(0, 2))
legend("topright", 
       legend = c("a", "b", "c", "d", "e", "f"), 
       fill = 1:6, ncol = 2,
       cex = 0.75)

This didn't work

=IIf((CountRows("ScannerStatisticsData") = 0),False,True)

but this did and I can't really explain why

=IIf((CountRows("ScannerStatisticsData") < 1),False,True)

guess SSRS doesn't like equal comparisons as much as less than.

Those are tuples, not sets. You can do this:

l1 = [(1, u'abc'), (2, u'def')]
l2 = [(tup[0],) for tup in l1]
l2
>>> [(1,), (2,)]

longcan only take string convertibles which can end in a base 10 numeral. So, the decimal is causing the harm. What you can do is, float the value before calling the long. If your program is on Python 2.x where int and long difference matters, and you are sure you are not using large integers, you could have just been fine with using int to provide the key as well.

So, the answer is long(float('234.89')) or it could just be int(float('234.89')) if you are not using large integers. Also note that this difference does not arise in Python 3, because int is upgraded to long by default. All integers are long in python3 and call to covert is just int

You can use a Contains query for this:

var movies = _db.Movies.Where(p => p.Genres.Any(x => listOfGenres.Contains(x));

My solution,

load the app using

NODE_ENV=production node app.js

Then setup config.js as a function rather than an object

module.exports = function(){
    switch(process.env.NODE_ENV){
        case 'development':
            return {dev setting};

        case 'production':
            return {prod settings};

        default:
            return {error or other settings};
    }
};

Then as per Jans solution load the file and create a new instance which we could pass in a value if needed, in this case process.env.NODE_ENV is global so not needed.

var Config = require('./conf'),
    conf = new Config();

Then we can access the config object properties exactly as before

conf.twitter.consumerKey

I encountered the same problem with:

Spring Boot version = 1.5.10
Spring Security version = 4.2.4

The problem occurred on the endpoints, where the ModelAndView viewName was defined with a preceding forward slash. Example:

ModelAndView mav = new ModelAndView("/your-view-here");

If I removed the slash it worked fine. Example:

ModelAndView mav = new ModelAndView("your-view-here");

I also did some tests with RedirectView and it seemed to work with a preceding forward slash.

I know this is a bit old, but in case another beginner is going through this, I'll share some code that covers a bit more of the basic operations, here is another example that also includes the option to cancel the process and also report to the user the status of the process. I'm going to add on top of the code given by Alex Aza in the solution above

public Form1()
{
    InitializeComponent();

    backgroundWorker1.DoWork += backgroundWorker1_DoWork;
    backgroundWorker1.ProgressChanged += backgroundWorker1_ProgressChanged;
    backgroundWorker1.RunWorkerCompleted += backgroundWorker1_RunWorkerCompleted;  //Tell the user how the process went
    backgroundWorker1.WorkerReportsProgress = true;
    backgroundWorker1.WorkerSupportsCancellation = true; //Allow for the process to be cancelled
}

//Start Process
private void button1_Click(object sender, EventArgs e)
{
    backgroundWorker1.RunWorkerAsync();
}

//Cancel Process
private void button2_Click(object sender, EventArgs e)
{
    //Check if background worker is doing anything and send a cancellation if it is
    if (backgroundWorker1.IsBusy)
    {
        backgroundWorker1.CancelAsync();
    }

}

private void backgroundWorker1_DoWork(object sender, System.ComponentModel.DoWorkEventArgs e)
{
    for (int i = 0; i < 100; i++)
    {
        Thread.Sleep(1000);
        backgroundWorker1.ReportProgress(i);

        //Check if there is a request to cancel the process
        if (backgroundWorker1.CancellationPending)
        {
            e.Cancel = true;
            backgroundWorker1.ReportProgress(0);
            return;
        }
    }
    //If the process exits the loop, ensure that progress is set to 100%
    //Remember in the loop we set i < 100 so in theory the process will complete at 99%
    backgroundWorker1.ReportProgress(100);
}

private void backgroundWorker1_ProgressChanged(object sender, System.ComponentModel.ProgressChangedEventArgs e)
{
    progressBar1.Value = e.ProgressPercentage;
}

private void backgroundWorker1_RunWorkerCompleted(object sender, System.ComponentModel.RunWorkerCompletedEventArgs e)
{
    if (e.Cancelled)
    {
         lblStatus.Text = "Process was cancelled";
    }
    else if (e.Error != null)
    {
         lblStatus.Text = "There was an error running the process. The thread aborted";
    }
    else
    {
       lblStatus.Text = "Process was completed";
    }
}

You can use str() to cast it, or formatters:

"ME%d.txt" % (num,)

Just looking at the claim in the accepted answer that table variables don't participate in logging.

It seems generally untrue that there is any difference in quantity of logging (at least for insert/update/delete operations to the table itself though I have since found that there is some small difference in this respect for cached temporary objects in stored procedures due to additional system table updates).

I looked at the logging behaviour against both a @table_variable and a #temp table for the following operations.

1. Successful Insert
2. Multi Row Insert where statement rolled back due to constraint violation.
3. Update
4. Delete
5. Deallocate

The transaction log records were almost identical for all operations.

The table variable version actually has a few extra log entries because it gets an entry added to (and later removed from) the sys.syssingleobjrefs base table but overall had a few less bytes logged purely as the internal name for table variables consumes 236 less bytes than for #temp tables (118 fewer nvarchar characters).

Full script to reproduce (best run on an instance started in single user mode and using sqlcmd mode)

:setvar tablename "@T" 
:setvar tablescript "DECLARE @T TABLE"

/*
 --Uncomment this section to test a #temp table
:setvar tablename "#T" 
:setvar tablescript "CREATE TABLE #T"
*/

USE tempdb 
GO    
CHECKPOINT

DECLARE @LSN NVARCHAR(25)

SELECT @LSN = MAX([Current LSN])
FROM fn_dblog(null, null) 


EXEC(N'BEGIN TRAN StartBatch
SAVE TRAN StartBatch
COMMIT

$(tablescript)
(
[4CA996AC-C7E1-48B5-B48A-E721E7A435F0] INT PRIMARY KEY DEFAULT 0,
InRowFiller char(7000) DEFAULT ''A'',
OffRowFiller varchar(8000) DEFAULT REPLICATE(''B'',8000),
LOBFiller varchar(max) DEFAULT REPLICATE(cast(''C'' as varchar(max)),10000)
)


BEGIN TRAN InsertFirstRow
SAVE TRAN InsertFirstRow
COMMIT

INSERT INTO $(tablename)
DEFAULT VALUES

BEGIN TRAN Insert9Rows
SAVE TRAN Insert9Rows
COMMIT


INSERT INTO $(tablename) ([4CA996AC-C7E1-48B5-B48A-E721E7A435F0])
SELECT TOP 9 ROW_NUMBER() OVER (ORDER BY (SELECT 0))
FROM sys.all_columns

BEGIN TRAN InsertFailure
SAVE TRAN InsertFailure
COMMIT


/*Try and Insert 10 rows, the 10th one will cause a constraint violation*/
BEGIN TRY
INSERT INTO $(tablename) ([4CA996AC-C7E1-48B5-B48A-E721E7A435F0])
SELECT TOP (10) (10 + ROW_NUMBER() OVER (ORDER BY (SELECT 0))) % 20
FROM sys.all_columns
END TRY
BEGIN CATCH
PRINT ERROR_MESSAGE()
END CATCH

BEGIN TRAN Update10Rows
SAVE TRAN Update10Rows
COMMIT

UPDATE $(tablename)
SET InRowFiller = LOWER(InRowFiller),
    OffRowFiller  =LOWER(OffRowFiller),
    LOBFiller  =LOWER(LOBFiller)


BEGIN TRAN Delete10Rows
SAVE TRAN Delete10Rows
COMMIT

DELETE FROM  $(tablename)
BEGIN TRAN AfterDelete
SAVE TRAN AfterDelete
COMMIT

BEGIN TRAN EndBatch
SAVE TRAN EndBatch
COMMIT')


DECLARE @LSN_HEX NVARCHAR(25) = 
        CAST(CAST(CONVERT(varbinary,SUBSTRING(@LSN, 1, 8),2) AS INT) AS VARCHAR) + ':' +
        CAST(CAST(CONVERT(varbinary,SUBSTRING(@LSN, 10, 8),2) AS INT) AS VARCHAR) + ':' +
        CAST(CAST(CONVERT(varbinary,SUBSTRING(@LSN, 19, 4),2) AS INT) AS VARCHAR)        

SELECT 
    [Operation],
    [Context],
    [AllocUnitName],
    [Transaction Name],
    [Description]
FROM   fn_dblog(@LSN_HEX, null) AS D
WHERE  [Current LSN] > @LSN  

SELECT CASE
         WHEN GROUPING(Operation) = 1 THEN 'Total'
         ELSE Operation
       END AS Operation,
       Context,
       AllocUnitName,
       COALESCE(SUM([Log Record Length]), 0) AS [Size in Bytes],
       COUNT(*)                              AS Cnt
FROM   fn_dblog(@LSN_HEX, null) AS D
WHERE  [Current LSN] > @LSN  
GROUP BY GROUPING SETS((Operation, Context, AllocUnitName),())

Results

+-----------------------+--------------------+---------------------------+---------------+------+---------------+------+------------------+
|                       |                    |                           |             @TV      |             #TV      |                  |
+-----------------------+--------------------+---------------------------+---------------+------+---------------+------+------------------+
| Operation             | Context            | AllocUnitName             | Size in Bytes | Cnt  | Size in Bytes | Cnt  | Difference Bytes |
+-----------------------+--------------------+---------------------------+---------------+------+---------------+------+------------------+
| LOP_ABORT_XACT        | LCX_NULL           |                           | 52            | 1    | 52            | 1    |                  |
| LOP_BEGIN_XACT        | LCX_NULL           |                           | 6056          | 50   | 6056          | 50   |                  |
| LOP_COMMIT_XACT       | LCX_NULL           |                           | 2548          | 49   | 2548          | 49   |                  |
| LOP_COUNT_DELTA       | LCX_CLUSTERED      | sys.sysallocunits.clust   | 624           | 3    | 624           | 3    |                  |
| LOP_COUNT_DELTA       | LCX_CLUSTERED      | sys.sysrowsets.clust      | 208           | 1    | 208           | 1    |                  |
| LOP_COUNT_DELTA       | LCX_CLUSTERED      | sys.sysrscols.clst        | 832           | 4    | 832           | 4    |                  |
| LOP_CREATE_ALLOCCHAIN | LCX_NULL           |                           | 120           | 3    | 120           | 3    |                  |
| LOP_DELETE_ROWS       | LCX_INDEX_INTERIOR | Unknown Alloc Unit        | 720           | 9    | 720           | 9    |                  |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.sysallocunits.clust   | 444           | 3    | 444           | 3    |                  |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.sysallocunits.nc      | 276           | 3    | 276           | 3    |                  |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.syscolpars.clst       | 628           | 4    | 628           | 4    |                  |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.syscolpars.nc         | 484           | 4    | 484           | 4    |                  |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.sysidxstats.clst      | 176           | 1    | 176           | 1    |                  |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.sysidxstats.nc        | 144           | 1    | 144           | 1    |                  |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.sysiscols.clst        | 100           | 1    | 100           | 1    |                  |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.sysiscols.nc1         | 88            | 1    | 88            | 1    |                  |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.sysobjvalues.clst     | 596           | 5    | 596           | 5    |                  |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.sysrowsets.clust      | 132           | 1    | 132           | 1    |                  |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.sysrscols.clst        | 528           | 4    | 528           | 4    |                  |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.sysschobjs.clst       | 1040          | 6    | 1276          | 6    | 236              |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.sysschobjs.nc1        | 820           | 6    | 1060          | 6    | 240              |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.sysschobjs.nc2        | 820           | 6    | 1060          | 6    | 240              |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.sysschobjs.nc3        | 480           | 6    | 480           | 6    |                  |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.syssingleobjrefs.clst | 96            | 1    |               |      | -96              |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | sys.syssingleobjrefs.nc1  | 88            | 1    |               |      | -88              |
| LOP_DELETE_ROWS       | LCX_MARK_AS_GHOST  | Unknown Alloc Unit        | 72092         | 19   | 72092         | 19   |                  |
| LOP_DELETE_ROWS       | LCX_TEXT_MIX       | Unknown Alloc Unit        | 16348         | 37   | 16348         | 37   |                  |
| LOP_FORMAT_PAGE       | LCX_HEAP           | Unknown Alloc Unit        | 1596          | 19   | 1596          | 19   |                  |
| LOP_FORMAT_PAGE       | LCX_IAM            | Unknown Alloc Unit        | 252           | 3    | 252           | 3    |                  |
| LOP_FORMAT_PAGE       | LCX_INDEX_INTERIOR | Unknown Alloc Unit        | 84            | 1    | 84            | 1    |                  |
| LOP_FORMAT_PAGE       | LCX_TEXT_MIX       | Unknown Alloc Unit        | 4788          | 57   | 4788          | 57   |                  |
| LOP_HOBT_DDL          | LCX_NULL           |                           | 108           | 3    | 108           | 3    |                  |
| LOP_HOBT_DELTA        | LCX_NULL           |                           | 9600          | 150  | 9600          | 150  |                  |
| LOP_INSERT_ROWS       | LCX_CLUSTERED      | sys.sysallocunits.clust   | 456           | 3    | 456           | 3    |                  |
| LOP_INSERT_ROWS       | LCX_CLUSTERED      | sys.syscolpars.clst       | 644           | 4    | 644           | 4    |                  |
| LOP_INSERT_ROWS       | LCX_CLUSTERED      | sys.sysidxstats.clst      | 180           | 1    | 180           | 1    |                  |
| LOP_INSERT_ROWS       | LCX_CLUSTERED      | sys.sysiscols.clst        | 104           | 1    | 104           | 1    |                  |
| LOP_INSERT_ROWS       | LCX_CLUSTERED      | sys.sysobjvalues.clst     | 616           | 5    | 616           | 5    |                  |
| LOP_INSERT_ROWS       | LCX_CLUSTERED      | sys.sysrowsets.clust      | 136           | 1    | 136           | 1    |                  |
| LOP_INSERT_ROWS       | LCX_CLUSTERED      | sys.sysrscols.clst        | 544           | 4    | 544           | 4    |                  |
| LOP_INSERT_ROWS       | LCX_CLUSTERED      | sys.sysschobjs.clst       | 1064          | 6    | 1300          | 6    | 236              |
| LOP_INSERT_ROWS       | LCX_CLUSTERED      | sys.syssingleobjrefs.clst | 100           | 1    |               |      | -100             |
| LOP_INSERT_ROWS       | LCX_CLUSTERED      | Unknown Alloc Unit        | 135888        | 19   | 135888        | 19   |                  |
| LOP_INSERT_ROWS       | LCX_INDEX_INTERIOR | Unknown Alloc Unit        | 1596          | 19   | 1596          | 19   |                  |
| LOP_INSERT_ROWS       | LCX_INDEX_LEAF     | sys.sysallocunits.nc      | 288           | 3    | 288           | 3    |                  |
| LOP_INSERT_ROWS       | LCX_INDEX_LEAF     | sys.syscolpars.nc         | 500           | 4    | 500           | 4    |                  |
| LOP_INSERT_ROWS       | LCX_INDEX_LEAF     | sys.sysidxstats.nc        | 148           | 1    | 148           | 1    |                  |
| LOP_INSERT_ROWS       | LCX_INDEX_LEAF     | sys.sysiscols.nc1         | 92            | 1    | 92            | 1    |                  |
| LOP_INSERT_ROWS       | LCX_INDEX_LEAF     | sys.sysschobjs.nc1        | 844           | 6    | 1084          | 6    | 240              |
| LOP_INSERT_ROWS       | LCX_INDEX_LEAF     | sys.sysschobjs.nc2        | 844           | 6    | 1084          | 6    | 240              |
| LOP_INSERT_ROWS       | LCX_INDEX_LEAF     | sys.sysschobjs.nc3        | 504           | 6    | 504           | 6    |                  |
| LOP_INSERT_ROWS       | LCX_INDEX_LEAF     | sys.syssingleobjrefs.nc1  | 92            | 1    |               |      | -92              |
| LOP_INSERT_ROWS       | LCX_TEXT_MIX       | Unknown Alloc Unit        | 5112          | 71   | 5112          | 71   |                  |
| LOP_MARK_SAVEPOINT    | LCX_NULL           |                           | 508           | 8    | 508           | 8    |                  |
| LOP_MODIFY_COLUMNS    | LCX_CLUSTERED      | Unknown Alloc Unit        | 1560          | 10   | 1560          | 10   |                  |
| LOP_MODIFY_HEADER     | LCX_HEAP           | Unknown Alloc Unit        | 3780          | 45   | 3780          | 45   |                  |
| LOP_MODIFY_ROW        | LCX_CLUSTERED      | sys.syscolpars.clst       | 384           | 4    | 384           | 4    |                  |
| LOP_MODIFY_ROW        | LCX_CLUSTERED      | sys.sysidxstats.clst      | 100           | 1    | 100           | 1    |                  |
| LOP_MODIFY_ROW        | LCX_CLUSTERED      | sys.sysrowsets.clust      | 92            | 1    | 92            | 1    |                  |
| LOP_MODIFY_ROW        | LCX_CLUSTERED      | sys.sysschobjs.clst       | 1144          | 13   | 1144          | 13   |                  |
| LOP_MODIFY_ROW        | LCX_IAM            | Unknown Alloc Unit        | 4224          | 48   | 4224          | 48   |                  |
| LOP_MODIFY_ROW        | LCX_PFS            | Unknown Alloc Unit        | 13632         | 169  | 13632         | 169  |                  |
| LOP_MODIFY_ROW        | LCX_TEXT_MIX       | Unknown Alloc Unit        | 108640        | 120  | 108640        | 120  |                  |
| LOP_ROOT_CHANGE       | LCX_CLUSTERED      | sys.sysallocunits.clust   | 960           | 10   | 960           | 10   |                  |
| LOP_SET_BITS          | LCX_GAM            | Unknown Alloc Unit        | 1200          | 20   | 1200          | 20   |                  |
| LOP_SET_BITS          | LCX_IAM            | Unknown Alloc Unit        | 1080          | 18   | 1080          | 18   |                  |
| LOP_SET_BITS          | LCX_SGAM           | Unknown Alloc Unit        | 120           | 2    | 120           | 2    |                  |
| LOP_SHRINK_NOOP       | LCX_NULL           |                           |               |      | 32            | 1    | 32               |
+-----------------------+--------------------+---------------------------+---------------+------+---------------+------+------------------+
| Total                 |                    |                           | 410144        | 1095 | 411232        | 1092 | 1088             |
+-----------------------+--------------------+---------------------------+---------------+------+---------------+------+------------------+

You can try

angular.element('#<elementId>').focus();

for eg.

angular.element('#txtUserId').focus();

its working for me.

the printf() function is used to print both strings and variables to the screen while the puts() function only permits you to print a string only to your screen.

#function call
read_names(names.txt)
#function def
def read_names(filename): 
with open(filename, 'r') as fileopen:
    name_list = [line.strip() for line in fileopen]
    print (name_list)

Assuming you're the administrator of the machine, Ubuntu has granted you the right to sudo to run any command as any user.
Also assuming you did not restrict the rights in the pg_hba.conf file (in the /etc/postgresql/9.1/main directory), it should contain this line as the first rule:

# Database administrative login by Unix domain socket  
local   all             postgres                                peer

(About the file location: 9.1 is the major postgres version and main the name of your "cluster". It will differ if using a newer version of postgres or non-default names. Use the pg_lsclusters command to obtain this information for your version/system).

Anyway, if the pg_hba.conf file does not have that line, edit the file, add it, and reload the service with sudo service postgresql reload.

Then you should be able to log in with psql as the postgres superuser with this shell command:

sudo -u postgres psql

Once inside psql, issue the SQL command:

ALTER USER postgres PASSWORD 'newpassword';

In this command, postgres is the name of a superuser. If the user whose password is forgotten was ritesh, the command would be:

ALTER USER ritesh PASSWORD 'newpassword';

References: PostgreSQL 9.1.13 Documentation, Chapter 19. Client Authentication

Keep in mind that you need to type postgres with a single S at the end

If leaving the password in clear text in the history of commands or the server log is a problem, psql provides an interactive meta-command to avoid that, as an alternative to ALTER USER ... PASSWORD:

\password username

It asks for the password with a double blind input, then hashes it according to the password_encryption setting and issue the ALTER USER command to the server with the hashed version of the password, instead of the clear text version.

Yes, use os.path.exists().

I gather the documentation wasn't great back in 2012 when this question was asked, but for anyone reading this in 2020+: There's now a whole section in the docs about how to add a source set for integration tests. You really should read it instead of copy/pasting code snippets here and banging your head against the wall trying to figure out why an answer from 2012-2016 doesn't quite work.

The answer is most likely simple but more nuanced than you may think, and the exact code you'll need is likely to be different from the code I'll need. For example, do you want your integration tests to use the same dependencies as your unit tests?

Use String.valueOf():

int sdRate=5;
//text_Rate is a TextView
text_Rate.setText(String.valueOf(sdRate)); //no more errors

function getTIMESTAMP() {
  var date = new Date();
  var year = date.getFullYear();
  var month = ("0" + (date.getMonth() + 1)).substr(-2);
  var day = ("0" + date.getDate()).substr(-2);
  var hour = ("0" + date.getHours()).substr(-2);
  var minutes = ("0" + date.getMinutes()).substr(-2);
  var seconds = ("0" + date.getSeconds()).substr(-2);

  return year + "-" + month + "-" + day + " " + hour + ":" + minutes + ":" + seconds;
}

//2016-01-14 02:40:01

Given this file:

$ cat words.txt
line1 word1 word2
line2 word3 word4
line3 word5 word6

If you just want one word at a time (ignoring the meaning of spaces vs line breaks in the file):

with open('words.txt','r') as f:
    for line in f:
        for word in line.split():
           print(word)    

Prints:

line1
word1
word2
line2
...
word6 

Similarly, if you want to flatten the file into a single flat list of words in the file, you might do something like this:

with open('words.txt') as f:
    flat_list=[word for line in f for word in line.split()]

>>> flat_list
['line1', 'word1', 'word2', 'line2', 'word3', 'word4', 'line3', 'word5', 'word6']

Which can create the same output as the first example with print '\n'.join(flat_list)...

Or, if you want a nested list of the words in each line of the file (for example, to create a matrix of rows and columns from a file):

with open('words.txt') as f:
    matrix=[line.split() for line in f]

>>> matrix
[['line1', 'word1', 'word2'], ['line2', 'word3', 'word4'], ['line3', 'word5', 'word6']]

If you want a regex solution, which would allow you to filter wordN vs lineN type words in the example file:

import re
with open("words.txt") as f:
    for line in f:
        for word in re.findall(r'\bword\d+', line):
            # wordN by wordN with no lineN

Or, if you want that to be a line by line generator with a regex:

 with open("words.txt") as f:
     (word for line in f for word in re.findall(r'\w+', line))

To hide your status bar in iOS7:

Open Your plist-file, then add a add a row called "View controller-based status bar appearance" and set its value to NO.

This is an old question but I just happened upon it.

The really short and a correct answer is already given and has the most votes. That is how you shrink a transaction log, and that was probably the OPs problem. And when the transaction log has grown out of control, it often needs to be shrunk back, but care should be taken to prevent future situations of a log growing out of control. This question on dba.se explains that. Basically - Don't let it get that large in the first place through proper recovery model, transaction log maintenance, transaction management, etc.

But the bigger question in my mind when reading this question about shrinking the data file (or even the log file) is why? and what bad things happen when you try? It appears as though shrink operations were done. Now in this case it makes sense in a sense - because MSDE/Express editions are capped at max DB size. But the right answer may be to look at the right version for your needs. And if you stumble upon this question looking to shrink your production database and this isn't the reason why, you should ask yourself the why? question.

I don't want someone searching the web for "how to shrink a database" coming across this and thinking it is a cool or acceptable thing to do.

Shrinking Data Files is a special task that should be reserved for special occasions. Consider that when you shrink a database, you are effectively fragmenting your indexes. Consider that when you shrink a database you are taking away the free space that a database may someday grow right back into - effectively wasting your time and incurring the performance hit of a shrink operation only to see the DB grow again.

I wrote about this concept in several blog posts about shrinking databases. This one called "Don't touch that shrink button" comes to mind first. I talk about these concepts outlined here - but also the concept of "Right-Sizing" your database. It is far better to decide what your database size needs to be, plan for future growth and allocate it to that amount. With Instant File Initialization available in SQL Server 2005 and beyond for data files, the cost of growths is lower - but I still prefer to have a proper initial application - and I'm far less scared of white space in a database than I am of shrinking in general with no thought first. :)

You could also put non-breaking spaces ( ) in lieu of the spaces so that they're forced to stay together.

How do I wrap this line of text
- asked by Peter 2 days ago

You can do with little Trick: Suppose you have requirement of : ( Width,Height )

Wrap_content ,Wrap_content :

 //use this as child
 Wrap(
  children: <Widget>[*your_child*])

Match_parent,Match_parent:

 //use this as child
Container(
        height: double.infinity,
    width: double.infinity,child:*your_child*)

Match_parent,Wrap_content :

 //use this as child
Row(
  mainAxisSize: MainAxisSize.max,
  children: <Widget>[*your_child*],
);

Wrap_content ,Match_parent:

 //use this as child
Column(
  mainAxisSize: MainAxisSize.max,
  children: <Widget>[your_child],
);

This answer is deprecated, please see @ankitjaininfo's answer below for a more modern solution

Here's how I think you make a POST request with data and a cookie using just the node http library. This example is posting JSON, set your content-type and content-length accordingly if you post different data.

// NB:- node's http client API has changed since this was written
// this code is for 0.4.x
// for 0.6.5+ see http://nodejs.org/docs/v0.6.5/api/http.html#http.request

var http = require('http');

var data = JSON.stringify({ 'important': 'data' });
var cookie = 'something=anything'

var client = http.createClient(80, 'www.example.com');

var headers = {
    'Host': 'www.example.com',
    'Cookie': cookie,
    'Content-Type': 'application/json',
    'Content-Length': Buffer.byteLength(data,'utf8')
};

var request = client.request('POST', '/', headers);

// listening to the response is optional, I suppose
request.on('response', function(response) {
  response.on('data', function(chunk) {
    // do what you do
  });
  response.on('end', function() {
    // do what you do
  });
});
// you'd also want to listen for errors in production

request.write(data);

request.end();

What you send in the Cookie value should really depend on what you received from the server. Wikipedia's write-up of this stuff is pretty good: http://en.wikipedia.org/wiki/HTTP_cookie#Cookie_attributes

This is really late to the party, but maybe it will help someone. My solution seems similar to what the OP described as problematic, but maybe it's a feature that Chrome offers now, but not then. I tried right-clicking and saving the .log file after the object was written to the console, but all that gave me was a text file with this:

console.js:230 Done: Array(50000)[0 … 9999][10000 … 19999][20000 … 29999][30000 … 39999][40000 … 49999]length: 50000__proto__: Array(0)

which was of no use to anyone.

What I ended up doing was finding the console.log(data) in the code, dropped a breakpoint on it and then typed JSON.Stringify(data) in the console which displayed the entire object as a JSON string and the Chrome console actually gives you a button to copy it. Then paste into a text editor and there's your JSON

If you have a form action and an input type="submit" inside form tags, it's going to submit the old fashioned way and basically refresh the page. When doing AJAX type transactions this isn't the desired effect you are after.

Remove the action. Or remove the form altogether, though in cases it does come in handy to serialize to cut your workload. If the form tags remain, move the button outside the form tags, or alternatively make it a link with an onclick or click handler as opposed to an input button. Jquery UI Buttons works great in this case because you can mimic an input button with an a tag element.

FYI

The method call System.runFinalizersOnExit(true) guarantees that finalizer methods are called before Java shuts down. However, this method is inherently unsafe and has been deprecated. An alternative is to add “shutdown hooks” with the method Runtime.addShutdownHook.

Masarrat Siddiqui

If I understood the question correctly, you can use the slicing notation to keep everything except the last item:

record = record[:-1]

But a better way is to delete the item directly:

del record[-1]

Note 1: Note that using record = record[:-1] does not really remove the last element, but assign the sublist to record. This makes a difference if you run it inside a function and record is a parameter. With record = record[:-1] the original list (outside the function) is unchanged, with del record[-1] or record.pop() the list is changed. (as stated by @pltrdy in the comments)

Note 2: The code could use some Python idioms. I highly recommend reading this:
Code Like a Pythonista: Idiomatic Python (via wayback machine archive).

git clean -d -f -i is the best way to do it.

This will help to clean in a more controlled manner.

-i stands for interactive.

The simplest solution (without depending on any third-party library or platform) is to create a URL instance pointing to the web page / link you want to download, and read the content using streams.

For example:

import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.net.URL;
import java.net.URLConnection;


public class DownloadPage {

    public static void main(String[] args) throws IOException {

        // Make a URL to the web page
        URL url = new URL("http://stackoverflow.com/questions/6159118/using-java-to-pull-data-from-a-webpage");

        // Get the input stream through URL Connection
        URLConnection con = url.openConnection();
        InputStream is =con.getInputStream();

        // Once you have the Input Stream, it's just plain old Java IO stuff.

        // For this case, since you are interested in getting plain-text web page
        // I'll use a reader and output the text content to System.out.

        // For binary content, it's better to directly read the bytes from stream and write
        // to the target file.


        BufferedReader br = new BufferedReader(new InputStreamReader(is));

        String line = null;

        // read each line and write to System.out
        while ((line = br.readLine()) != null) {
            System.out.println(line);
        }
    }
}

Hope this helps.

Bootstrap 3.x.x

   <!-- Modal -->
<div class="modal fade" id="employeeBasicDetails" tabindex="-1" role="dialog" aria-labelledby="myModalLabel">
    <div class="modal-dialog modal-sm employeeModal" role="document">

        <form>

        <div class="modal-content">
            <div class="modal-header">
                <button type="button" class="close" data-dismiss="modal" aria-label="Close"><span aria-hidden="true">&times;</span></button>
                <h4 class="modal-title" id="myModalLabel">Modal Title</h4>
            </div>

            <div class="modal-body row">
                Modal Body...
            </div>

            <div class="modal-footer"> 
                <button type="button" class="btn btn-default" data-dismiss="modal">Close</button>
            </div>
        </div>

        </form>

    </div>
</div>

Notice I added .employeeModal class in second div. Then style that class.

.employeeModal{
        width: 700px;
    }

You can install PIL using apt install:

For Python 3 use:

sudo apt install python3-pil

For Python 2 use:

sudo apt install python-pil

Where pil should be lowercase as Clarkey252 points out

None of these methods worked for me, the only solution was to nuke the whole repo and re-clone it. This includes stashing, resetting, adding then resetting, clrf settings, case sensitivity etc. Sigh..

I have had the same problem.

In my case, since I have the original repository in my local machine, I have made a copy in a new folder without any hidden file (.git, .gitignore).

Finally I have added the .gitignore file to the new created folder.

Then I have created and added the new repository from the local path (in my case using GitHub Desktop).

You could decompose the date into it's constituent parts and then concatenate them together like this:

MsgBox(Now.Day & "/" & Now.Month & "/" & Now.Year)

When you use

@GeneratedValue(strategy=GenerationType.AUTO)

or

@GeneratedValue which is short hand way of the above, Hibernate starts to decide the best generation strategy for you, in this case it has selected

GenerationType.SEQUENCE as the strategy and that is why it is looking for

schemaName.hibernate_sequence which is a table, for sequence based id generation.

When you use GenerationType.SEQUENCE as the strategy you need to provide the @TableGenerator as follows.

     @Id
     @GeneratedValue(strategy = GenerationType.TABLE, generator = "user_table_generator")
     @TableGenerator(name = "user_table_generator",
                table = "user_keys", pkColumnName = "PK_NAME", valueColumnName = "PK_VALUE")
     @Column(name = "USER_ID")
     private long userId;

When you set the strategy it the to

@GeneratedValue(strategy = GenerationType.IDENTITY) .

original issue get resolved because then Hibernate stop looking for sequence table.

If you only need to set text content and not retrieve, here's a trivial DOM version you can use on any browser; it doesn't require either the IE innerText extension or the DOM Level 3 Core textContent property.

function setTextContent(element, text) {
    while (element.firstChild!==null)
        element.removeChild(element.firstChild); // remove all existing content
    element.appendChild(document.createTextNode(text));
}

It is also possible to place the MySQL data directory in a tmpfs in thus speeding up the database write and read calls. It might not be the most efficient way to do this but sometimes you can't just change the storage engine.

Here is my fstab entry for my MySQL data directory

none            /opt/mysql/server-5.6/data  tmpfs   defaults,size=1000M,uid=999,gid=1000,mode=0700          0       0

You may also want to take a look at the innodb_flush_log_at_trx_commit=2 setting. Maybe this will speedup your MySQL sufficently.

innodb_flush_log_at_trx_commit changes the mysql disk flush behaviour. When set to 2 it will only flush the buffer every second. By default each insert will cause a flush and thus cause more IO load.

SHA and AES serve different purposes. SHA is used to generate a hash of data and AES is used to encrypt data.

Here's an example of when an SHA hash is useful to you. Say you wanted to download a DVD ISO image of some Linux distro. This is a large file and sometimes things go wrong - so you want to validate that what you downloaded is correct. What you would do is go to a trusted source (such as the offical distro download point) and they typically have the SHA hash for the ISO image available. You can now generated the comparable SHA hash (using any number of open tools) for your downloaded data. You can now compare the two hashs to make sure they match - which would validate that the image you downloaded is correct. This is especially important if you get the ISO image from an untrusted source (such as a torrent) or if you are having trouble using the ISO and want to check if the image is corrupted.

As you can see in this case the SHA has was used to validate data that was not corrupted. You have every right to see the data in the ISO.

AES, on the other hand, is used to encrypt data, or prevent people from viewing that data with knowing some secret.

AES uses a shared key which means that the same key (or a related key) is used to encrypted the data as is used to decrypt the data. For example if I encrypted an email using AES and I sent that email to you then you and I would both need to know the shared key used to encrypt and decrypt the email. This is different than algorithms that use a public key such PGP or SSL.

If you wanted to put them together you could encrypt a message using AES and then send along an SHA1 hash of the unencrypted message so that when the message was decrypted they were able to validate the data. This is a somewhat contrived example.

If you want to know more about these some Wikipedia search terms (beyond AES and SHA) you want want to try include:

Symmetric-key algorithm (for AES) Cryptographic hash function (for SHA) Public-key cryptography (for PGP and SSL)

no that cannot work(not with real data):

String sql = "INSERT INTO course " +
        "VALUES (course_code, course_desc, course_chair)";
    stmt.executeUpdate(sql);

change it to:

String sql = "INSERT INTO course (course_code, course_desc, course_chair)" +
        "VALUES (?, ?, ?)";

Create a PreparedStatment with that sql and insert the values with index:

PreparedStatement preparedStatement = conn.prepareStatement(sql);
preparedStatement.setString(1, "Test");
preparedStatement.setString(2, "Test2");
preparedStatement.setString(3, "Test3");
preparedStatement.executeUpdate(); 

str = "\x12\x34\x56\x78\x9a\xbc\xde\xf1\x23\x45\x67\x89\xab\xcd\xef\x12\x34\x56\x78\x9a"
require 'cgi'
CGI.escape(str)
# => "%124Vx%9A%BC%DE%F1%23Eg%89%AB%CD%EF%124Vx%9A"

Taken from @J-Rou's comment

I guess the method std:remove works but it was giving some compatibility issue with the includes so I ended up writing this little function:

string removeCharsFromString(const string str, char* charsToRemove )
{
    char c[str.length()+1]; // + terminating char
    const char *p = str.c_str();
    unsigned int z=0, size = str.length();
    unsigned int x;
    bool rem=false;

    for(x=0; x<size; x++)
    {
        rem = false;
        for (unsigned int i = 0; charsToRemove[i] != 0; i++)
        {
            if (charsToRemove[i] == p[x])
            {
                rem = true;
                break;
            }
        }
        if (rem == false) c[z++] = p[x];
    }

    c[z] = '\0';
    return string(c);
}

Just use as

myString = removeCharsFromString(myString, "abc\r");

and it will remove all the occurrence of the given char list.

This might also be a bit more efficient as the loop returns after the first match, so we actually do less comparison.

The error is exactly what it says it is; you're trying to take sumall[0] when sumall is an int and that doesn't make any sense. What do you believe sumall should be?

Will the username and password be automatically SSL encrypted? Is the same true for GETs and POSTs

Yes, yes yes.

The entire communication (save for the DNS lookup if the IP for the hostname isn't already cached) is encrypted when SSL is in use.

Using latest Jenkins version 2.7.4 which is also having a bug for existing jobs.

1. Add new JDKs through Manage Jenkins -> Global Tool Configuration -> JDK ** If you edit current job then JDK dropdown is not showing (bug)

2. Hit http://your_jenkin_server:8080/restart and restart the server

3. Re-configure job

Now, you should see JDK dropdown in "job name" -> Configure in Jenkins web ui. It will list all JDKs available in Jenkins configuration.

I got the same error message when I forgot to log in to the company firewall, before performing a POST request through a proxy.

found a solution but not sure the performance if the map has large size, useful for normal case.

   /**
     * sort HashMap<String, CustomData> by value
     * CustomData needs to provide compareTo() for comparing CustomData
     * @param map
     */

    public void sortHashMapByValue(final HashMap<String, CustomData> map) {
        ArrayList<String> keys = new ArrayList<String>();
        keys.addAll(map.keySet());
        Collections.sort(keys, new Comparator<String>() {
            @Override
            public int compare(String lhs, String rhs) {
                CustomData val1 = map.get(lhs);
                CustomData val2 = map.get(rhs);
                if (val1 == null) {
                    return (val2 != null) ? 1 : 0;
                } else if (val1 != null) && (val2 != null)) {
                    return = val1.compareTo(val2);
                }
                else {
                    return 0;
                }
            }
        });

        for (String key : keys) {
            CustomData c = map.get(key);
            if (c != null) {
                Log.e("key:"+key+", CustomData:"+c.toString());
            } 
        }
    }

I had the same issue, didn't want to mess with multiple typedefs in different files, so I resolved it with inheritance:

was:

class BurstBoss {

public:

    typedef std::pair<Ogre::ParticleSystem*, bool> ParticleSystem; // removed this with...

did:

class ParticleSystem : public std::pair<Ogre::ParticleSystem*, bool>
{

public:

    ParticleSystem(Ogre::ParticleSystem* system, bool enabled) : std::pair<Ogre::ParticleSystem*, bool>(system, enabled) {
    };
};

Worked like a charm. Of course, I had to change any references from

BurstBoss::ParticleSystem

to simply

ParticleSystem

Check your terminal it happen only when you have your application running on another terminal..

The port is already listening..

jQuery uses a .call(...) method to assign the current node to this inside the function you pass as the parameter.

EDIT:

Don't be afraid to look inside jQuery's code when you have a doubt, it's all in clear and well documented Javascript.

ie: the answer to this question is around line 574,
callback.call( object[ name ], name, object[ name ] ) === false

Use the backslash \ or choose a different delimiter, ie m#.\d# instead of /.\d/ "In Perl, you can change the / regular expression delimiter to almost any other special character if you preceed it with the letter m (for match);"

This is the simplest way I know to get the first day of the previous month:

Step 1: Move data to Postgres

Step 2:

select date_trunc('month', getdate()) - '1 MONTH'::interval;

I made something like that:

$('#image-file').on('change', function() {
 var numb = $(this)[0].files[0].size/1024/1024;
numb = numb.toFixed(2);
if(numb > 2){
alert('to big, maximum is 2MiB. You file size is: ' + numb +' MiB');
} else {
alert('it okey, your file has ' + numb + 'MiB')
}
        });

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.0.0/jquery.min.js"></script>
<input type="file" id="image-file">

You can also try System.Diagnostics.Debugger.Launch() method. It helps in taking the debugger pointer to the specified location and you can then debug you code.

Before this step please install your service.exe using the command line of Visual Studio command prompt - installutil projectservice.exe

Then start your service from the Control Panel -> Administrative Tools -> Computer Management ->Service and Application -> Services -> Your Service Name

Your module and your class AthleteList have the same name. The line

import AthleteList

imports the module and creates a name AthleteList in your current scope that points to the module object. If you want to access the actual class, use

AthleteList.AthleteList

In particular, in the line

return(AthleteList(templ.pop(0), templ.pop(0), templ))

you are actually accessing the module object and not the class. Try

return(AthleteList.AthleteList(templ.pop(0), templ.pop(0), templ))

If someone is looking to sub out more than a comma I'm a fan of:

"1,200".chars.grep(/\d/).join.to_i

dunno about performance but, it is more flexible than a gsub, ie:

"1-200".chars.grep(/\d/).join.to_i

I have had the same problem in the past on many sites I have done here at work. The only guaranteed method of making sure the user gets the email is to advise the user to add you to there safe list. Any other method is really only going to be something that can help with it and isn't guaranteed.

The only way to get the iOS dictation is to sign up yourself through Nuance: http://dragonmobile.nuancemobiledeveloper.com/ - it's expensive, because it's the best. Presumably, Apple's contract prevents them from exposing an API.

The built in iOS accessibility features allow immobilized users to access dictation (and other keyboard buttons) through tools like VoiceOver and Assistive Touch. It may not be worth reinventing this if your users might be familiar with these tools.

low dpi is 0.75x dimensions of medium dpi

high dpi is 1.5x dimensions of medium dpi

extra high dpi is 2x dimensinons of medium dpi

It's a good practice to make all the images in vector based format so you can resize them easily using a vector design software like Illustrator etc..

Reason of the error: Package name left blank while creating a class. This make use of default package. Thus causes this error.

Quick fix:

1. Create a package eg. helloWorld inside the src folder.
2. Move helloWorld.java file in that package. Just drag and drop on the package. Error should disappear.

Explanation:

• My Eclipse version: 2020-09 (4.17.0)
• My Java version: Java 15, 2020-09-15

Latest version of Eclipse required java11 or above. The module feature is introduced in java9 and onward. It was proposed in 2005 for Java7 but later suspended. Java is object oriented based. And module is the moduler approach which can be seen in language like C. It was harder to implement it, due to which it took long time for the release. Source: Understanding Java 9 Modules

When you create a new project in Eclipse then by default module feature is selected. And in Eclipse-2020-09-R, a pop-up appears which ask for creation of module-info.java file. If you select don't create then module-info.java will not create and your project will free from this issue.

Best practice is while crating project, after giving project name. Click on next button instead of finish. On next page at the bottom it ask for creation of module-info.java file. Select or deselect as per need.

If selected: (by default) click on finish button and give name for module. Now while creating a class don't forget to give package name. Whenever you create a class just give package name. Any name, just don't left it blank.

If deselect: No issue

1. PYTHONPATH is an environment variable
2. Yes (see https://unix.stackexchange.com/questions/24802/on-which-unix-distributions-is-python-installed-as-part-of-the-default-install)
3. /usr/lib/python2.7 on Ubuntu
4. you shouldn't install packages manually. Instead, use pip. When a package isn't in pip, it usually has a setuptools setup script which will install the package into the proper location (see point 3).
5. if you use pip or setuptools, then you don't need to set PYTHONPATH explicitly

If you look at the instructions for pyopengl, you'll see that they are consistent with points 4 and 5.

UUID schemes generally use not only a pseudo-random element, but also the current system time, and some sort of often-unique hardware ID if available, such as a network MAC address.

The whole point of using UUID is that you trust it to do a better job of providing a unique ID than you yourself would be able to do. This is the same rationale behind using a 3rd party cryptography library rather than rolling your own. Doing it yourself may be more fun, but it's typically less responsible to do so.

I had the same issue, and it turned out to be that MariaDB was set to allow only root to log in locally via the unix_socket plug-in, so clearing that setting allowed successfully logging in with the user specified on the command line, provided a correct password is entered, of course. See this answer on Ask Ubuntu

Short and sweet:

A hash table wraps up an array, lets call it internalArray. Items are inserted into the array in this way:

let insert key value =
    internalArray[hash(key) % internalArray.Length] <- (key, value)
    //oversimplified for educational purposes

Sometimes two keys will hash to the same index in the array, and you want to keep both values. I like to store both values in the same index, which is simple to code by making internalArray an array of linked lists:

let insert key value =
    internalArray[hash(key) % internalArray.Length].AddLast(key, value)

So, if I wanted to retrieve an item out of my hash table, I could write:

let get key =
    let linkedList = internalArray[hash(key) % internalArray.Length]
    for (testKey, value) in linkedList
        if (testKey = key) then return value
    return null

Delete operations are just as simple to write. As you can tell, inserts, lookups, and removal from our array of linked lists is nearly O(1).

When our internalArray gets too full, maybe at around 85% capacity, we can resize the internal array and move all of the items from the old array into the new array.

Either link the shell to an object, have the batch job terminate the shell object (exit) and have the VBA code continue once the shell object = Nothing?

Or have a look at this: Capture output value from a shell command in VBA?

<script>
function numberWithCommas(x) {
    return x.toString().replace(/\B(?=(\d{3})+(?!\d))/g, ",");
}
</script>

Use:

numberWithCommas(200000);

==> 200,000

I had a similar problem where I didn't want to change the Python module search path and needed to load a module relatively from a script (in spite of "scripts can't import relative with all" as BrenBarn explained nicely above).

So I used the following hack. Unfortunately, it relies on the imp module that became deprecated since version 3.4 to be dropped in favour of importlib. (Is this possible with importlib, too? I don't know.) Still, the hack works for now.

Example for accessing members of moduleX in subpackage1 from a script residing in the subpackage2 folder:

#!/usr/bin/env python3

import inspect
import imp
import os

def get_script_dir(follow_symlinks=True):
    """
    Return directory of code defining this very function.
    Should work from a module as well as from a script.
    """
    script_path = inspect.getabsfile(get_script_dir)
    if follow_symlinks:
        script_path = os.path.realpath(script_path)
    return os.path.dirname(script_path)

# loading the module (hack, relying on deprecated imp-module)
PARENT_PATH = os.path.dirname(get_script_dir())
(x_file, x_path, x_desc) = imp.find_module('moduleX', [PARENT_PATH+'/'+'subpackage1'])
module_x = imp.load_module('subpackage1.moduleX', x_file, x_path, x_desc)

# importing a function and a value
function = module_x.my_function
VALUE = module_x.MY_CONST

A cleaner approach seems to be to modify the sys.path used for loading modules as mentioned by Federico.

#!/usr/bin/env python3

if __name__ == '__main__' and __package__ is None:
    from os import sys, path
    # __file__ should be defined in this case
    PARENT_DIR = path.dirname(path.dirname(path.abspath(__file__)))
   sys.path.append(PARENT_DIR)
from subpackage1.moduleX import *

Saw this thread while looking for something else and I know it is super old, but I wanted to add my 2 cents.

NEVER USE VLOOKUP. It's one of the worst performing formulas in excel. Use index match instead. It even works without sorting data, unless you have a -1 or 1 in the end of the match formula (explained more below)

Here is a link with the appropriate formulas.

The Sheet 2 formula would be this: =IF(A2="","",INDEX(Sheet1!B:B,MATCH($A2,Sheet1!$A:$A,0)))

• IF(A2="","", means if A2 is blank, return a blank value
• INDEX(Sheet1!B:B, is saying INDEX B:B where B:B is the data you want to return. IE the name column.
• Match(A2, is saying to Match A2 which is the ID you want to return the Name for.
• Sheet1!A:A, is saying you want to match A2 to the ID column in the previous sheet
• ,0)) is specifying you want an exact value. 0 means return an exact match to A2, -1 means return smallest value greater than or equal to A2, 1 means return the largest value that is less than or equal to A2. Keep in mind -1 and 1 have to be sorted.

More information on the Index/Match formula

Other fun facts: $ means absolute in a formula. So if you specify $B$1 when filling a formula down or over keeps that same value. If you over $B1, the B remains the same across the formula, but if you fill down, the 1 increases with the row count. Likewise, if you used B$1, filling to the right will increment the B, but keep the reference of row 1.

I also included the use of indirect in the second section. What indirect does is allow you to use the text of another cell in a formula. Since I created a named range sheet1!A:A = ID, sheet1!B:B = Name, and sheet1!C:C=Price, I can use the column name to have the exact same formula, but it uses the column heading to change the search criteria.

Good luck! Hope this helps.

The problem is not the range, the problem is how the end of slice is calculated. with a fixed number 10 the simple for loop is ok but with a calculated size like bfl.Size() you get a function-call on every iteration. A simple range over int32 would help because this evaluate the bfl.Size() only once.

type BFLT PerfServer   
  func (this *BFLT) Call() {
    bfl := MqBufferLCreateTLS(0)                                                                                   
    for this.ReadItemExists() {                                                                                    
      bfl.AppendU(this.ReadU())                                                                                    
    }
    this.SendSTART()
    // size := bfl.Size() 
    for i := int32(0); i < bfl.Size() /* size */; i++ {                                                                             
      this.SendU(bfl.IndexGet(i))                                                                                  
    }
    this.SendRETURN()
  }

I imagine that trygetvalue is doing something more like:

if(myDict.ReallyOptimisedVersionofContains(someKey))
{ 
  someVal = myDict[someKey];
  return true;
}
return false;

So hopefully no try/catch anywhere.

I think it is just a method of convenience really. I generally use it as it saves a line of code or two.

Just remove css from your js fiddle,use the myvaue === true.

<div ng-show="myvalue == true" class="ng-cloak">Here I am</div>

I did it like this (I am using SQL Server):

SELECT 'Q' + cast(DATEPART(QUARTER, GETDATE()) as varchar(1)) + ' - ' + cast(DATEPART(YEAR, GETDATE()) as varchar(4)) AS 'Date Quarter'

You can use a lightweight library pure-md5. Just a 4.7kb.

$("#file-dialog").change(function() {_x000D_
  handleFiles(this.files);_x000D_
});_x000D_
_x000D_
function handleFiles(files) {_x000D_
  for (var index = 0; index < files.length; index++) {_x000D_
    var file = files[index];_x000D_
    var fileReader = new FileReader();_x000D_
    fileReader.onload = function(e) {_x000D_
      $('body').append(`_x000D_
        <div style="margin-top: 2rem;">_x000D_
          <span>${file.name}: </span>_x000D_
          <span>${(md5(e.target.result))}</span>_x000D_
        </div>_x000D_
      `);_x000D_
    }_x000D_
_x000D_
    fileReader.readAsText(file, 'utf-8');_x000D_
  }_x000D_
_x000D_
}

body {_x000D_
  font-family: sans-serif;_x000D_
}

<script src="https://unpkg.com/[email protected]/lib/index.js"></script>_x000D_
<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>_x000D_
<input type="file" id="file-dialog" multiple="true" accept="image/*">

There's a bit of code that might help:

import java.awt.Component;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;

import javax.swing.JFrame;
import javax.swing.JMenu;
import javax.swing.JMenuBar;
import javax.swing.JMenuItem;

public class ModalJFrame extends JFrame {

    Object currentWindow = this;

    public ModalJFrame() 
    {
        super();
        super.setTitle("Main JFrame");
        super.setSize(500, 500);
        super.setResizable(true);
        super.setLocationRelativeTo(null);

        JMenuBar menuBar = new JMenuBar();
        super.setJMenuBar(menuBar);

        JMenu fileMenu = new JMenu("File");
        JMenu editMenu = new JMenu("Edit");

        menuBar.add(fileMenu);
        menuBar.add(editMenu);

        JMenuItem newAction = new JMenuItem("New");
        JMenuItem openAction = new JMenuItem("Open");
        JMenuItem exitAction = new JMenuItem("Exit");
        JMenuItem cutAction = new JMenuItem("Cut");
        JMenuItem copyAction = new JMenuItem("Copy");
        JMenuItem pasteAction= new JMenuItem("Paste");

        fileMenu.add(newAction);
        fileMenu.add(openAction);
        fileMenu.addSeparator();
        fileMenu.add(exitAction);

        editMenu.add(cutAction);
        editMenu.add(copyAction);
        editMenu.addSeparator();
        editMenu.add(pasteAction);

        newAction.addActionListener(new ActionListener()
        {
            public void actionPerformed(ActionEvent arg0)
            {

                JFrame popupJFrame = new JFrame();

                popupJFrame.addWindowListener(new WindowAdapter()
                {
                      public void windowClosing(WindowEvent e) 
                      {
                          ((Component) currentWindow).setEnabled(true);                     }
                      });

                ((Component) currentWindow).setEnabled(false);
                popupJFrame.setTitle("Pop up JFrame");
                popupJFrame.setSize(400, 500);
                popupJFrame.setAlwaysOnTop(true);
                popupJFrame.setResizable(false);
                popupJFrame.setLocationRelativeTo(getRootPane());
                popupJFrame.setVisible(true);
                popupJFrame.setDefaultCloseOperation(JFrame.HIDE_ON_CLOSE);
            }
        });

        exitAction.addActionListener(new ActionListener()
        {
            public void actionPerformed(ActionEvent arg0)
            {
                System.exit(0);
            }
        });
    }
    public static void main(String[] args) {

        ModalJFrame myWindow = new ModalJFrame();
        myWindow.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        myWindow.setVisible(true);
    }
}

Never ever extend Object.prototype.

Horrible things will happen to your code. Things will break. You're extending all object types, including object literals.

Here's a quick example you can try:

    // Extend Object.prototype
Object.prototype.extended = "I'm everywhere!";

    // See the result
alert( {}.extended );          // "I'm everywhere!"
alert( [].extended );          // "I'm everywhere!"
alert( new Date().extended );  // "I'm everywhere!"
alert( 3..extended );          // "I'm everywhere!"
alert( true.extended );        // "I'm everywhere!"
alert( "here?".extended );     // "I'm everywhere!"

Instead create a function that you pass the object.

Object.filter = function( obj, predicate) {
    let result = {}, key;

    for (key in obj) {
        if (obj.hasOwnProperty(key) && !predicate(obj[key])) {
            result[key] = obj[key];
        }
    }

    return result;
};

You could also set it in the create table statement.

`CREATE TABLE(...) AUTO_INCREMENT=1000`

I think by combining .children() with $(this) will return the children of the selected item only

consider the following:

$("div li").click(function() {
$(this).children().css('background','red');
});

this will change the background of the clicked li only

I've had the same problem.
The reason was, that my local branch had somehow lost the tracking to the remote counterpart.

After

git branch branch_name --set-upstream-to=origin/branch_name
git pull

and resolving the merging conflicts, I was able to push.

Apparently, the system I was using had the docker-ce not Docker. Thus, running below command did the trick.

sudo apt-get purge docker-ce

sudo rm -rf /var/lib/docker

hope it helps

The solution discussed here worked well for me. This solution uses built-in cuda functions and is very simple to implement.

The relevant code is copied below:

#include <stdio.h>
#include <stdlib.h>

__global__ void foo(int *ptr)
{
  *ptr = 7;
}

int main(void)
{
  foo<<<1,1>>>(0);

  // make the host block until the device is finished with foo
  cudaDeviceSynchronize();

  // check for error
  cudaError_t error = cudaGetLastError();
  if(error != cudaSuccess)
  {
    // print the CUDA error message and exit
    printf("CUDA error: %s\n", cudaGetErrorString(error));
    exit(-1);
  }

  return 0;
}

It took me a hell of a long time to really get a handle on this. The key to me was in understanding that "@" is for stuff that you want evaluated in situ and passed through into the directive as a constant where "=" actually passes the object itself.

There's a nice blog post that explains this this at: http://blog.ramses.io/technical/AngularJS-the-difference-between-@-&-and-=-when-declaring-directives-using-isolate-scopes

A Subquery in the Select clause, as in your case, is also known as a Scalar Subquery, which means that it's a form of expression. Meaning that it can only return one value.

I'm afraid you can't return multiple columns from a single Scalar Subquery, no.

Here's more about Oracle Scalar Subqueries:

http://docs.oracle.com/cd/B19306_01/server.102/b14200/expressions010.htm#i1033549

This is the good way using formats:

const now = moment()
now.format("hh:mm:ss K") // 1:00:00 PM
now.format("HH:mm:ss") // 13:00:00

Red more about moment sring format

Robots cannot execute JavaScript so you do something like injecting some kind of hidden element into the page with JavaScript and then detecting it's presence prior to form submission but beware because some of your users will also have JavaScript disabled

Otherwise I think you will be forced to use a form of client proof of "humanness"

Enterprise Architect will build a UML diagram from imported source code.

This works for to present any view controller ,if you have navigation controller available. self.navigationController?.present(MyViewController, animated: true, completion: nil) Also , I can able to present alerts and mail controller also.

1. Modify the definition of the function check_me as::

    function check_me(ev) {
   

2. Now you can access the methods and parameters of the event, in your case:

    ev.preventDefault();
   

3. Then, you have to pass the parameter on the onclick in the inline call::

    <button type="button" onclick="check_me(event);">Click Me!</button>
   

A useful link to understand this.

Full example:

<!DOCTYPE html>
<html lang="en">
  <head>
    <script type="text/javascript">
      function check_me(ev) {
        ev.preventDefault();
        alert("Hello World!")
      }
    </script>
  </head>
  <body>
    <button type="button" onclick="check_me(event);">Click Me!</button>
  </body>
</html>

Alternatives (best practices):

Although the above is the direct answer to the question (passing an event object to an inline event), there are other ways of handling events that keep the logic separated from the presentation

A. Using addEventListener:

<!DOCTYPE html>
<html lang="en">
  <head>
  </head>
  <body>
    <button id='my_button' type="button">Click Me!</button>

    <!-- put the javascript at the end to guarantee that the DOM is ready to use-->
    <script type="text/javascript">
      function check_me(ev) {
        ev.preventDefault();
        alert("Hello World!")
      }
      
      <!-- add the event to the button identified #my_button -->
      document.getElementById("my_button").addEventListener("click", check_me);
    </script>
  </body>
</html>

B. Isolating Javascript:

Both of the above solutions are fine for a small project, or a hackish quick and dirty solution, but for bigger projects, it is better to keep the HTML separated from the Javascript.

Just put this two files in the same folder:

• example.html:

<!DOCTYPE html>
<html lang="en">
  <head>
  </head>
  <body>
    <button id='my_button' type="button">Click Me!</button>

    <!-- put the javascript at the end to guarantee that the DOM is ready to use-->
    <script type="text/javascript" src="example.js"></script>
  </body>
</html>

• example.js:

function check_me(ev) {
    ev.preventDefault();
    alert("Hello World!")
}
document.getElementById("my_button").addEventListener("click", check_me);

The simplest way is :

SHOW OPEN TABLES WHERE In_use > 0

You get the locked tables only of the current database.

I stumbled upon this question via a Google search for a very similar one (using the serial port on a server from a Linux client over TCP/IP), so, even though this is not an answer to exact original question, some of the code might be useful to the original poster, I think:

• Making a Linux box with a serial port listen on the TCP port to share the modem: ser2net
• Using this "shared" modem from another Linux workstation: remtty

This is borderline programming, but look into using tr:

$ echo "this is just a test" | tr -s ' ' | tr ' ' '_'

Should do it. The first invocation squeezes the spaces down, the second replaces with underscore. You probably need to add TABs and other whitespace characters, this is for spaces only.

I know this is an old question, but someone should have mentioned the compile-time macros in Availability.h. All of the other methods here are runtime solutions, and will not work in a header file, class category, or ivar definition.

For these situations, use

#if __IPHONE_OS_VERSION_MAX_ALLOWED >= __IPHONE_6_0
  // iOS 6+ code here
#else
  // Pre iOS 6 code here
#endif

h/t this answer

in HTML:

<a class="main-item" (click)="onNavigate()">Go to URL</a>

OR

<button class="main-item" (click)="onNavigate()">Go to URL</button>

in TS file:

onNavigate(){
    // your logic here.... like set the url 
    const url = 'https://www.google.com';
    window.open(url, '_blank');
}

Test with [char]9, such as:

$Tab = [char]9
Write-Output "$Tab hello"

Output:

     hello

The head command can get the first n lines. Variations are:

head -7 file
head -n 7 file
head -7l file

which will get the first 7 lines of the file called "file". The command to use depends on your version of head. Linux will work with the first one.

To append lines to the end of the same file, use:

echo 'first line to add' >>file
echo 'second line to add' >>file
echo 'third line to add' >>file

or:

echo 'first line to add
second line to add
third line to add' >>file

to do it in one hit.

So, tying these two ideas together, if you wanted to get the first 10 lines of the input.txt file to output.txt and append a line with five "=" characters, you could use something like:

( head -10 input.txt ; echo '=====' ) > output.txt

In this case, we do both operations in a sub-shell so as to consolidate the output streams into one, which is then used to create or overwrite the output file.

Quick tip - if you use a PyCharm, go to Edit Configurations => Configurations and enable FLASK_DEBUG checkbox, restart the Run.

Swift 3:

let documentsURL = try! FileManager().url(for: .documentDirectory,
                                          in: .userDomainMask,
                                          appropriateFor: nil,
                                          create: true)

... gives you a file URL of the documents directory. The following checks if there's a file named foo.html:

let fooURL = documentsURL.appendingPathComponent("foo.html")
let fileExists = FileManager().fileExists(atPath: fooURL.path)

Objective-C:

NSString* documentsPath = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES)[0];

NSString* foofile = [documentsPath stringByAppendingPathComponent:@"foo.html"];
BOOL fileExists = [[NSFileManager defaultManager] fileExistsAtPath:foofile];

Using .replace(/\s+/g,'') works fine;

Example:

this.slug = removeAccent(this.slug).replace(/\s+/g,'');

In Cygwin:

$cmp -bl <file1> <file2>

diffs binary offsets and values are in decimal and octal respectively.. Vladi.

You are still in the context of your CategoryController even though you're loading a PartialView from your Views/News folder.

Sessions Step By Step

1. Defining session before everything, No output should be before that, NO OUTPUT

   <?php
   session_start();
   ?>
   

2. Set your session inside a page and then you have access in that page. For example this is page 1.php

   <?php
      //This is page 1 and then we will use session that defined from this page:
       session_start();
       $_SESSION['email']='[email protected]';
   ?>
   

3. Using and Getting session in 2.php

    <?php
   
   //In this page I am going to use session:
   
     session_start();
     if($_SESSION['email']){
     echo 'Your Email Is Here!  :) ';
     }
    ?>
   

NOTE: Comments don't have output.

Try to use the empty() function:

<xsl:if test="empty(node/ABC/node()) and empty(node/DEF/node())">
    <xsl:text>This should work</xsl:text>
</xsl:if>

This identifies ABC and DEF as empty in the sense that they do not have any child nodes (no elements, no text nodes, no processing instructions, no comments).

But, as pointed out by @Ian, your elements might not be empty really or that might not be your actual problem - you did not show what your input XML looks like.

Another cause of error could be your relative position in the tree. This way of testing conditions only works if the surrounding template matches the parent element of node or if you iterate over the parent element of node.

On the command line:

php -i | grep sourceguardian

If it's there, then you'll get some text. If not, you won't get a thing.

try something like :

var focusout = false;

$("#Button1").click(function () {
    if (focusout == true) {
        focusout = false;
        return;
    }
    else {
        GetInfo();
    }
});

$("#Text1").focusout(function () {
    focusout = true;
    GetInfo();
});

  public void ReadXmlFile()
    {
        string path = HttpContext.Current.Server.MapPath("~/App_Data"); // Finds the location of App_Data on server.
        XmlTextReader reader = new XmlTextReader(System.IO.Path.Combine(path, "XMLFile7.xml")); //Combines the location of App_Data and the file name
        while (reader.Read())
        {
            switch (reader.NodeType)
            {
                case XmlNodeType.Element:
                    break;
                case XmlNodeType.Text:
                    columnNames.Add(reader.Value);
                    break;
                case XmlNodeType.EndElement:
                    break;
            }
        }
    }

You can avoid the first statement and just specify the path name in constructor of XmlTextReader.

It is late for this question. Here is my 2 cents. I made a rake task for stopping the server when I don't have access to it. I only tested on Mac though.

With this you can simply add it to your project then run the rake command.

Here you go:

Gist link: -latest version will be here. https://gist.github.com/houmanka/289184ca5d8d92de0499#file-server-rake

Some code in here:

# Make a file under: `project_root/lib/tasks/server.rake`

# Then paste the following code

    namespace :server do
      desc "Stop the running server by killing the PID"
      task :kill do
        STDOUT.puts "Enter port number: "
        post_number = STDIN.gets.strip
        system "pid=$(lsof -i:#{post_number.to_i} -t); kill -TERM $pid || kill -KILL $pid"
      end
    end

# Then to use it in the terminal: `rake server:kill`

$pwd /usr/lib/jvm/jre1.8.0_25/bin

./jcontrol

as follow,

java Control Panel --> Security --> Edit Site list ,
then apply, and ok.

Do you need any other information except the date? If not:

SELECT DISTINCT start_date FROM table;

With all due respect to other posts, you have here a very simple solution, using CSS3 and jQuery, without using any further external resources nor files.

$('#submit').click(function(){_x000D_
  $(this).addClass('button_loader').attr("value","");_x000D_
  window.setTimeout(function(){_x000D_
    $('#submit').removeClass('button_loader').attr("value","\u2713");_x000D_
    $('#submit').prop('disabled', true);_x000D_
  }, 3000);_x000D_
});

#submit:focus{_x000D_
  outline:none;_x000D_
  outline-offset: none;_x000D_
}_x000D_
_x000D_
.button {_x000D_
    display: inline-block;_x000D_
    padding: 6px 12px;_x000D_
    margin: 20px 8px;_x000D_
    font-size: 14px;_x000D_
    font-weight: 400;_x000D_
    line-height: 1.42857143;_x000D_
    text-align: center;_x000D_
    white-space: nowrap;_x000D_
    vertical-align: middle;_x000D_
    -ms-touch-action: manipulation;_x000D_
    cursor: pointer;_x000D_
    -webkit-user-select: none;_x000D_
    -moz-user-select: none;_x000D_
    -ms-user-select: none;_x000D_
    background-image: none;_x000D_
    border: 2px solid transparent;_x000D_
    border-radius: 5px;_x000D_
    color: #000;_x000D_
    background-color: #b2b2b2;_x000D_
    border-color: #969696;_x000D_
}_x000D_
_x000D_
.button_loader {_x000D_
  background-color: transparent;_x000D_
  border: 4px solid #f3f3f3;_x000D_
  border-radius: 50%;_x000D_
  border-top: 4px solid #969696;_x000D_
  border-bottom: 4px solid #969696;_x000D_
  width: 35px;_x000D_
  height: 35px;_x000D_
  -webkit-animation: spin 0.8s linear infinite;_x000D_
  animation: spin 0.8s linear infinite;_x000D_
}_x000D_
_x000D_
@-webkit-keyframes spin {_x000D_
  0% { -webkit-transform: rotate(0deg); }_x000D_
  99% { -webkit-transform: rotate(360deg); }_x000D_
}_x000D_
_x000D_
@keyframes spin {_x000D_
  0% { transform: rotate(0deg); }_x000D_
  99% { transform: rotate(360deg); }_x000D_
}

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<input id="submit" class="button" type="submit" value="Submit" />

Instead of instantiating as follows:

TestRestTemplate restTemplate = new TestRestTemplate();

Just do it like this:

TestRestTemplate restTemplate = new TestRestTemplate(user, password);

It works for me, I hope it helps!

You should do a small pl/sql block using a cursor for loop and delete the rows you don't want to keep. For instance:

declare
prev_var my_table.var1%TYPE;

begin

for t in (select var1 from my_table order by var 1) LOOP

-- if previous var equal current var, delete the row, else keep on going.
end loop;

end;

It is actually impossible to stop the execution of the promise, but you can hijack the reject and call it from the promise itself.

class CancelablePromise {
  constructor(executor) {
    let _reject = null;
    const cancelablePromise = new Promise((resolve, reject) => {
      _reject = reject;
      return executor(resolve, reject);
    });
    cancelablePromise.cancel = _reject;

    return cancelablePromise;
  }
}

Usage:

const p = new CancelablePromise((resolve, reject) => {
  setTimeout(() => {
    console.log('resolved!');
    resolve();
  }, 2000);
})

p.catch(console.log);

setTimeout(() => {
  p.cancel(new Error('Messed up!'));
}, 1000);

If you're happy to require 'active_support/core_ext', then you can use

DateTime.now.midnight # => Sat, 19 Nov 2011 00:00:00 -0800

Solution to flatten properties and arrays as well.

Example input:

{
  obj1: {
    prop1: "value1",
    prop2: "value2"
  },
  arr1: [
    "value1",
    "value2"
  ]
}

Output:

"arr1[0]": "value1"
"arr1[1]": "value2"
"obj1.prop1": "value1"
"obj1.prop2": "value2"

Source code:

flatten(object, path = '', res = undefined) {
      if (!Array.isArray(res)) {
          res = [];
      }
      if (object !== null && typeof object === 'object') {
          if (Array.isArray(object)) {
              for (let i = 0; i < object.length; i++) {
                  this.flatten(object[i], path + '[' + i + ']', res)
              }
          } else {
              const keys = Object.keys(object)
              for (let i = 0; i < keys.length; i++) {
                  const key = keys[i]
                  this.flatten(object[key], path ? path + '.' + key : key, res)
              }
          }
      } else {
          if (path) {
              res[path] = object
          }
      }
      return res
  }

Even if you use string formatting, sometimes you still need white spaces at the beginning or the end of your string. For these cases, neither escaping with \, nor xml:space attribute helps. You must use HTML entity   for a whitespace.

Use   for non-breakable whitespace.
Use   for regular space.

You want to convert it to an object first and then access normally making sure to cast it.

JObject obj = JObject.Parse(json);
string name = (string) obj["Name"];

Maybe this will help someone. I saw that on IIS 7 .ttf is already a known mime-type. It's configured as:

application/octet-stream

So I just added that for all the CSS font types (.oet, .svg, .ttf, .woff) and IIS started serving them. Chrome dev tools also do not complain about re-interpreting the type.

Cheers, Michael

Basically this happens when you have your Class Application in "another package". For example:

com.server
 - Applicacion.class (<--this class have @ComponentScan)
com.server.config
 - MongoConfig.class 
com.server.repository
 - UserRepository

I solve the problem with this in the Application.class

@SpringBootApplication
@ComponentScan ({"com.server", "com.server.config"})
@EnableMongoRepositories ("com.server.repository") // this fix the problem

Another less elegant way is to: put all the configuration classes in the same package.

I have executed the code in my machine its working for IE and FF also.

function closeSelf(){
    // do something

    if(condition satisfied){
       alert("conditions satisfied, submiting the form.");
       document.forms['certform'].submit();
       window.close();
    }else{
       alert("conditions not satisfied, returning to form");    
    }
}


<form action="/system/wpacert" method="post" enctype="multipart/form-data" name="certform">
       <div>Certificate 1: <input type="file" name="cert1"/></div>
       <div>Certificate 2: <input type="file" name="cert2"/></div>
       <div>Certificate 3: <input type="file" name="cert3"/></div>

       // change the submit button to normal button
       <div><input type="button" value="Upload"  onclick="closeSelf();"/></div>
</form>

I solved this simply:

<div ng-repeat="Object in List | filter: (FilterObj.FilterProperty1 ? {'ObjectProperty1': FilterObj.FilterProperty1} : '') | filter:(FilterObj.FilterProperty2 ? {'ObjectProperty2': FilterObj.FilterProperty2} : '')">

Not Knowing all of your requirements. For example, are you trying to uniquely identify a computer from all of the computers in the world, or are you just trying to uniquely identify a computer from a set of users of your application. Also, can you create files on the system?

If you are able to create a file. You could create a file and use the creation time of the file as your unique id. If you create it in user space then it would uniquely identify a user of your application on a particular machine. If you created it somewhere global then it could uniquely identify the machine.

Again, as most things, How fast is fast enough.. or in this case, how unique is unique enough.

you never set d[a] to any value.

Because of this, d[a] evaluates to undefined, and you can't set properties on undefined.

If you add d[a] = {} right after d = {} things should work as expected.

Alternatively, you could use an object initializer:

d[a] = {
    greetings: b,
    data: c
};

Or you could set all the properties of d in an anonymous function instance:

d = new function () {
    this[a] = {
        greetings: b,
        data: c
    };
};

If you're in an environment that supports ES2015 features, you can use computed property names:

d = {
  [a]: {
    greetings: b,
    data: c
  }
};

It will impact your script if you work with multi-byte text that you substring from. If this is the case, I higly recommend enabling mb_* functions in your php.ini or do this ini_set("mbstring.func_overload", 2);

$string = "'test1', 'test2', 'test3',";_x000D_
echo mb_substr($string, 0, -1);

that's why Idon't like NULL values in the database at all.
I hope you are having it for a reason.

if ($_POST['location_id'] === '') {
  $location_id = 'NULL';
} else {
  $location_id = "'".$_POST['location_id']."'";
}
$notes = mysql_real_escape_string($_POST['notes']);
$ipid  = mysql_real_escape_string($_POST['ipid']);

$sql="UPDATE addresses 
    SET notes='$notes', location_id=$location_id
    WHERE ipid = '$ipid'";

echo $sql; //to see different queries this code produces
// and difference between NULL and 'NULL' in the query

Try this:

var request = WebRequest.Create("http://www.gravatar.com/avatar/6810d91caff032b202c50701dd3af745?d=identicon&r=PG");

using (var response = request.GetResponse())
using (var stream = response.GetResponseStream())
{
    pictureBox1.Image = Bitmap.FromStream(stream);
}

try this:

select salesid,count (salesid) from AXDelNotesNoTracking group by salesid having count (salesid) >1

A simple (and maybe simplistic) answer to the question is the content of $x numeric is the following:

if ($x  eq  $x+0) { .... }

It does a textual comparison of the original $x with the $x converted to a numeric value.

I also tried http://www.eclipse.org/cdt/ in Ubuntu 12.04.2 LTS and works fine!

1. First, I downloaded it from www.eclipse.org/downloads/, choosing Eclipse IDE for C/C++ Developers.

2. I save the file somewhere, let´s say into my home directory. Open a console or terminal, and type:

   >>cd ~; tar xvzf eclipse*.tar.gz;

3. Remember for having Eclipse running in Linux, it is required a JVM, so download a jdk file e.g jdk-7u17-linux-i586.rpm (I cann´t post the link due to my low reputation) ... anyway

4. Install the .rpm file following http://www.wikihow.com/Install-Java-on-Linux

5. Find the path to the Java installation, by typing:

   >>which java

6. I got /usr/bin/java. To start up Eclipse, type:

   >>cd ~/eclipse; ./eclipse -vm /usr/bin/java

Also, once everything is installed, in the home directory, you can double-click the executable icon called eclipse, and then you´ll have it!. In case you like an icon, create a .desktop file in /usr/share/applications:

>>sudo gedit /usr/share/applications/eclipse.desktop

The .desktop file content is as follows:

[Desktop Entry]  
Name=Eclipse  
Type=Application  
Exec="This is the path of the eclipse executable on your machine"  
Terminal=false 
Icon="This is the path of the icon.xpm file on your machine"  
Comment=Integrated Development Environment  
NoDisplay=false  
Categories=Development;IDE  
Name[en]=eclipse.desktop  

Best luck!

Android Annotations:

@OptionsItem(android.R.id.home)
void homeSelected() {
    onBackPressed();
}

Source: https://github.com/excilys/androidannotations

Consider that the files you need to delete have an extension txt and is located in the location D:\My Folder, then you could use the below code inside the bat file.

cd "D:\My Folder"
DEL *.txt 

Yes you are right. You have placed WHERE clause wrong. You can only use one WHERE clause in single query so try AND for multiple conditions like this:

 SELECT table1.f_id  FROM table1 
   INNER JOIN table2
     ON table2.f_id = table1.f_id
 WHERE table2.f_type = 'InProcess'
   AND f_com_id = '430'
   AND f_status = 'Submitted' 

In my case I needed the configuration stage to be blocking as a whole, but execute each role in parallel. I've tackled this issue using the following code:

echo webserver loadbalancer database | tr ' ' '\n' \
| xargs -I % -P 3 bash -c 'ansible-playbook $1.yml' -- %

the -P 3 argument in xargs makes sure that all the commands are ran in parallel, each command executes the respective playbook and the command as a whole blocks until all parts are finished.

The pythonic way is to use enumerate:

for idx,item in enumerate(list):

You can use an HTML to PDF tool like wkhtmltopdf. And then you can use a PDF to image tool like imagemagick. Admittedly this is server side and a very convoluted process...

Try Exoplayer2

https://github.com/google/ExoPlayer

It is highly customisable

    private void initializePlayer() {
         player = ExoPlayerFactory.newSimpleInstance(
             new DefaultRenderersFactory(this),
             new DefaultTrackSelector(), new DefaultLoadControl());

         playerView.setPlayer(player);

         player.setPlayWhenReady(playWhenReady);
         player.seekTo(currentWindow, playbackPosition);

Uri uri = Uri.parse(getString(R.string.media_url_mp3));
     MediaSource mediaSource = buildMediaSource(uri);
     player.prepare(mediaSource, true, false);
    }

private MediaSource buildMediaSource(Uri uri) {
  return new ExtractorMediaSource.Factory(
      new DefaultHttpDataSourceFactory("exoplayer-codelab")).
      createMediaSource(uri);
}

@Override
public void onStart() {
 super.onStart();
 if (Util.SDK_INT > 23) {
   initializePlayer();
 }
}

Check this url for more details

https://codelabs.developers.google.com/codelabs/exoplayer-intro/#2

Make sure that in the path to the project there is no foldername having whitespace. While creating a project the specified path folders must not contain any space in their naming.

You can use Apache Commons IO to find the folder size easily.

If you are on maven, please add the following dependency in your pom.xml file.

<!-- https://mvnrepository.com/artifact/commons-io/commons-io -->
<dependency>
    <groupId>commons-io</groupId>
    <artifactId>commons-io</artifactId>
    <version>2.6</version>
</dependency>

If not a fan of Maven, download the following jar and add it to the class path.

https://repo1.maven.org/maven2/commons-io/commons-io/2.6/commons-io-2.6.jar

public long getFolderSize() {

    File folder = new File("src/test/resources");
    long size = FileUtils.sizeOfDirectory(folder);

    return size; // in bytes
}

To get file size via Commons IO,

File file = new File("ADD YOUR PATH TO FILE");

long fileSize = FileUtils.sizeOf(file);

System.out.println(fileSize); // bytes

It is also achievable via Google Guava

For Maven, add the following:

<!-- https://mvnrepository.com/artifact/com.google.guava/guava -->
<dependency>
    <groupId>com.google.guava</groupId>
    <artifactId>guava</artifactId>
    <version>28.1-jre</version>
</dependency>

If not using Maven, add the following to class path

https://repo1.maven.org/maven2/com/google/guava/guava/28.1-jre/guava-28.1-jre.jar

public long getFolderSizeViaGuava() {
        File folder = new File("src/test/resources");
        Iterable<File> files = Files.fileTreeTraverser()
                .breadthFirstTraversal(folder);
        long size = StreamSupport.stream(files.spliterator(), false)
                .filter(f -> f.isFile())
                .mapToLong(File::length).sum();

        return  size;
    }

To get file size,

 File file = new File("PATH TO YOUR FILE");
 long s  = file.length();
 System.out.println(s);

Not sure if you want jQuery.

var form;

form.onsubmit = function (e) {
  // stop the regular form submission
  e.preventDefault();

  // collect the form data while iterating over the inputs
  var data = {};
  for (var i = 0, ii = form.length; i < ii; ++i) {
    var input = form[i];
    if (input.name) {
      data[input.name] = input.value;
    }
  }

  // construct an HTTP request
  var xhr = new XMLHttpRequest();
  xhr.open(form.method, form.action, true);
  xhr.setRequestHeader('Content-Type', 'application/json; charset=UTF-8');

  // send the collected data as JSON
  xhr.send(JSON.stringify(data));

  xhr.onloadend = function () {
    // done
  };
};

For someone who is new to ORDER BY with CASE this may be useful

ORDER BY 
    CASE WHEN GRADE = 'A' THEN 0
         WHEN GRADE = 'B' THEN 1
         ELSE 2 END

A connection timeout is the maximum amount of time that the program is willing to wait to setup a connection to another process. You aren't getting or posting any application data at this point, just establishing the connection, itself.

A socket timeout is the timeout when waiting for individual packets. It's a common misconception that a socket timeout is the timeout to receive the full response. So if you have a socket timeout of 1 second, and a response comprised of 3 IP packets, where each response packet takes 0.9 seconds to arrive, for a total response time of 2.7 seconds, then there will be no timeout.

You need to initialize it first:

p = Pump().getPumps()

You are pointing your JAVA_HOME to the JRE which is the Java Runtime Environment. The runtime environment doesn't have a java compiler in its bin folder. You should download the JDK which is the Java Development Kit. Once you've installed that, you can see in your bin folder that there's a file called javac.exe. That's your compiler.

Install the extension "Code Runner". Check if you can compile your program with csc (ex.: csc hello.cs). The command csc is shipped with Mono. Then add this to your VS Code user settings:

"code-runner.executorMap": {
        "csharp": "echo '# calling mono\n' && cd $dir && csc /nologo $fileName && mono $dir$fileNameWithoutExt.exe",
        // "csharp": "echo '# calling dotnet run\n' && dotnet run"
    }

Open your C# file and use the execution key of Code Runner.

Edit: also added dotnet run, so you can choose how you want to execute your program: with Mono, or with dotnet. If you choose dotnet, then first create the project (dotnet new console, dotnet restore).

This is relatively new to C# which makes it easy for us to call the functions with respect to the null or non-null values in method chaining.

old way to achieve the same thing was:

var functionCaller = this.member;
if (functionCaller!= null)
    functionCaller.someFunction(var someParam);

and now it has been made much easier with just:

member?.someFunction(var someParam);

I strongly recommend this doc page.

Very similar to some answers here, but in my case I had images that sometimes were taller, sometimes larger.

This style worked like a charm to make sure that all images use all available space, keep the ratio and not cuts:

.img {
   object-fit: contain;
   max-width: 100%;
   max-height: 100%;
   width: auto;
   height: auto;
}

You can use the shell for this purpose.

Set shl = CreateObject("WScript.Shell") 
shl.Run "cmd mkdir YourDir" & copy "

You'll want to register yourself for the 2 keyboard notifications:

[[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(keyboardDidShow:) name: UIKeyboardDidShowNotification object:nil];
[[NSNotificationCenter defaultCenter] addObserver:self selector:@selector (keyboardDidHide:) name: UIKeyboardDidHideNotification object:nil];

Great post on how to adjust your TextField to the keyboard - http://iosdevelopertips.com/user-interface/adjust-textfield-hidden-by-keyboard.html

import os 
zip_file_path = "C:\AA\BB"
file_list = os.listdir(path)
abs_path = []
for a in file_list:
    x = zip_file_path+'\\'+a
    print x
    abs_path.append(x)
for f in abs_path:
    zip=zipfile.ZipFile(f)
    zip.extractall(zip_file_path)

This does not contain validation for the file if its not zip. If the folder contains non .zip file it will fail.

Check if the session is empty or not in C# MVC Version Lower than 5.

if (!string.IsNullOrEmpty(Session["emp_num"] as string))
{
    //cast it and use it
    //business logic
}

Check if the session is empty or not in C# MVC Version Above 5.

if(Session["emp_num"] != null)
{
    //cast it and use it
    //business logic
}

In some circumstances, it may be possible to move (all, or at least a key part) of the software into a web service that your organization hosts.

That way, the license checks can be performed in the safety of your own server room.

It seems to my case that Excel 2011 for Mac OS is not using Encoding.GetEncoding("10000") as i thought and wasted 2 days with but the same iso as on Microsoft OS. The best proof for this is to make a file in Excel 2011 for MAC with special chars, save it as CSV and then open it in MAC text editor and the chars are scrambled.

For me this approach worked - meaning that csv export on Excel 2011 on MAC OS has special western europeean chars inside:

Encoding isoMacOS = Encoding.GetEncoding("iso-8859-1");
Encoding defaultEncoding = Encoding.Default; 

// Convert the string into a byte array.
byte[] defaultEncodingBytes = defaultEncoding.GetBytes(exportText);

// Perform the conversion from one encoding to the other.
byte[] ansiBytes = Encoding.Convert(defaultEncoding, isoMacOS, defaultEncodingBytes);

decodedString = isoMacOS.GetString(ansiBytes);

Add jQuery JavaScript library together with the jquery.zbox.css and jquery.zbox.js to your webpage.

<link rel="stylesheet" href="jquery.zbox.css">
<script src="jquery.min.js"></script>
<script src="jquery.zbox.min.js"></script>

Add a group of thumbnails with links pointing to the full sized images into the webpage.

<a class="zb" rel="group" href="1.png" title="Image 1">
  <img src="thumb1.png">
</a>
<a class="zb" rel="group" href="2.png" title="Image 2">
  <img src="thumb2.png">
</a>
<a class="zb" rel="group" href="3.png" title="Image 3">
 <img src="thumb3.png">
</a>

Call the function on document ready. That's it.

In the view source do:

$(".zb").zbox();

how about doing it the way hooktube does it? they don't actually use the video URL for the html5 element, but the google video redirector url that calls upon that video. check out here's how they present some despacito random video...

<video id="player-obj" controls="" src="https://redirector.googlevideo.com/videoplayback?ratebypass=yes&amp;mt=1510077993----SKIPPED----amp;utmg=ytap1,,hd720"><source>Your browser does not support HTML5 video.</video>

the code is for the following video page https://hooktube.com/watch?v=72UO0v5ESUo

youtube to mp3 on the other hand has turned into extremely monetized monster that returns now download.html on half of video download requests... annoying...

the 2 links in this answer are to my personal experiences with both resources. how hooktube is nice and fresh and actually helps avoid censorship and geo restrictions.. check it out, it's pretty cool. and youtubeinmp4 is a popup monster now known as ConvertInMp4...

Just a suggestion, but you might try the Pear Mail_Mime class instead.

http://pear.php.net/package/Mail_Mime/docs

Otherwise you can use a bit of code. Gabi Purcaru method of using rename() won't work the way it's written. See this post http://us3.php.net/manual/en/function.rename.php#97347 . You'll need something like this:

$dir = dirname($_FILES["file"]["tmp_name"]);
$destination = $dir . DIRECTORY_SEPARATOR . $_FILES["file"]["name"];
rename($_FILES["file"]["tmp_name"], $destination);
$geekMail->attach($destination);

In principle, you can pass any reformatting function to the labels parameter:

+ scale_y_continuous(labels = function(x) paste0(x*100, "%")) # Multiply by 100 & add %  

Or

+ scale_y_continuous(labels = function(x) paste0(x, "%")) # Add percent sign 

Reproducible example:

library(ggplot2)
df = data.frame(x=seq(0,1,0.1), y=seq(0,1,0.1))

ggplot(df, aes(x,y)) + 
  geom_point() +
  scale_y_continuous(labels = function(x) paste0(x*100, "%"))

You can also use XPath's text() node test to get the text nodes only. For example

var target = document.querySelector('div.title');
var iter = document.evaluate('text()', target, null, XPathResult.ORDERED_NODE_ITERATOR_TYPE);
var node;
var want = '';

while (node = iter.iterateNext()) {
    want += node.data;
}