When I got the same error on my machine ("connection is refused"), the reason was that I had defined the following on the server side:
Naming.rebind("rmi://localhost:8080/AddService"
,addService);
Thus the server binds both the IP = 127.0.0.1 and the port 8080.
But on the client side I had used:
AddServerInterface st = (AddServerInterface)Naming.lookup("rmi://localhost"
+"/AddService");
Thus I forgot to add the port number after the localhost, so I rewrote the above command and added the port number 8080 as follows:
AddServerInterface st = (AddServerInterface)Naming.lookup("rmi://localhost:8080"
+"/AddService");
and everything worked fine.
With API 8 and greater, the location of the SD card has changed. @fiXedd's answer is good, but for safer code, you should use Environment.getExternalStorageState()
to check if the media is available. Then you can use getExternalFilesDir()
to navigate to the directory you want (assuming you're using API 8 or greater).
You can read more in the SDK documentation.
$len = 10; // total number of numbers
$min = 100; // minimum
$max = 999; // maximum
$range = []; // initialize array
foreach (range(0, $len - 1) as $i) {
while(in_array($num = mt_rand($min, $max), $range));
$range[] = $num;
}
print_r($range);
I was interested to see how the accepted answer stacks up against mine. It's useful to note, a hybrid of both may be advantageous; in fact a function that conditionally uses one or the other depending on certain values:
# The accepted answer
function randRange1($min, $max, $count)
{
$numbers = range($min, $max);
shuffle($numbers);
return array_slice($numbers, 0, $count);
}
# My answer
function randRange2($min, $max, $count)
{
$range = array();
while ($i++ < $count) {
while(in_array($num = mt_rand($min, $max), $range));
$range[] = $num;
}
return $range;
}
echo 'randRange1: small range, high count' . PHP_EOL;
$time = microtime(true);
randRange1(0, 9999, 5000);
echo (microtime(true) - $time) . PHP_EOL . PHP_EOL;
echo 'randRange2: small range, high count' . PHP_EOL;
$time = microtime(true);
randRange2(0, 9999, 5000);
echo (microtime(true) - $time) . PHP_EOL . PHP_EOL;
echo 'randRange1: high range, small count' . PHP_EOL;
$time = microtime(true);
randRange1(0, 999999, 6);
echo (microtime(true) - $time) . PHP_EOL . PHP_EOL;
echo 'randRange2: high range, small count' . PHP_EOL;
$time = microtime(true);
randRange2(0, 999999, 6);
echo (microtime(true) - $time) . PHP_EOL . PHP_EOL;
The results:
randRange1: small range, high count
0.019910097122192
randRange2: small range, high count
1.5043621063232
randRange1: high range, small count
2.4722430706024
randRange2: high range, small count
0.0001051425933837
If you're using a smaller range and a higher count of returned values, the accepted answer is certainly optimal; however as I had expected, larger ranges and smaller counts will take much longer with the accepted answer, as it must store every possible value in range. You even run the risk of blowing PHP's memory cap. A hybrid that evaluates the ratio between range and count, and conditionally chooses the generator would be the best of both worlds.
I had the same error. In my case wasn't because of a variable named str
. But because I named a function with a str parameter and the variable the same.
same_name = same_name(var_name: str)
I run it in a loop. The first time it run ok. The second time I got this error. Renaming the variable to a name different from the function name fixed this. So I think it's because Python once associate a function name in a scope, the second time tries to associate the left part (same_name =
) as a call to the function and detects that the str
parameter is not present, so it's missing, then it throws that error.
pip will not try to make things difficult for you on purpose.
The thing is commands based files are always installed in /bin
folders they can be anywhere on the system path.
I had the same problem and I found that I have these files in my
~/.local/bin/
folder instead of
/usr/loca/bin/
which is the common case, but I think they changed the default path to
~
or $HOME
directory because its more isolate for the pip installations and provides a distinction between apt-get packages and pip packages.
So coming to the point you have two choices here either you go to your .bashrc and make changes like this
# for virtualenv wrapper
export WORKON_HOME=$HOME/Envs
export PROJECT_HOME=$HOME/Devel
source $HOME/.local/bin/virtualenvwrapper.sh
and than create a directory virtualenvwrapper under
/usr/share/
and than symlink your virtualwrapper_lazy.sh like this
sudo ln -s ~/.local/bin/virtualenvwrapper_lazy.sh /usr/share/virtualenvwrapper/virtualenvwrapper_lazy.sh
and you can check if your workon command is working which will list your existing virtualenv's.
This should solve your problem, you should try to run the following below:
Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser
You must use the equals operator not the assignment like
if(document.form1.radio1[0].checked == true) {
alert("You have selected Option 1");
}
If your text is in a Bash variable, then Parameter Substitution ${var//\\//}
can replace substrings:
$ p='C:\foo\bar.xml'
$ printf '%s\n' "$p"
C:\foo\bar.xml
$ printf '%s\n' "${p//\\//}"
C:/foo/bar.xml
This may be leaner and clearer that filtering through a command such as tr
or sed
.
I had a similar problem in revamping a web site in Dreamweaver. The site structure is based on a complex set of tables, and this video was in one of the main layout cells. I created a nested table just for the video and then added an align=center
attribute to the new table:
<table align=center><tr><td>
<video width=420 height=236 controls="controls" autoplay="autoplay">
<source src="video/video.ogv" type='video/ogg; codecs="theora, vorbis"'/>
<source src="video/video.webm" type='video/webm' >
<source src="video/video.mp4" type='video/mp4'>
<p class="sidebar">If video is not visible, your browser does not support HTML5 video</p>
</video>
</td></tr></table>
I solved similar problem just by backing out of the project directory, then cd back into the project directory and bundle install.
A LinkedList can be used as a Queue - but you need to use it right. Here is an example code :
@Test
public void testQueue() {
LinkedList<Integer> queue = new LinkedList<>();
queue.add(1);
queue.add(2);
System.out.println(queue.pop());
System.out.println(queue.pop());
}
Output :
1
2
Remember, if you use push instead of add ( which you will very likely do intuitively ), this will add element at the front of the list, making it behave like a stack.
So this is a Queue only if used in conjunction with add.
Try this :
@Test
public void testQueue() {
LinkedList<Integer> queue = new LinkedList<>();
queue.push(1);
queue.push(2);
System.out.println(queue.pop());
System.out.println(queue.pop());
}
Output :
2
1
You can use the "filter" filter in your controller to get all the "C" grades. Getting the first element of the result array will give you the title of the subject that has grade "C".
$scope.gradeC = $filter('filter')($scope.results.subjects, {grade: 'C'})[0];
http://jsbin.com/ewitun/1/edit
The same with plain ES6:
$scope.gradeC = $scope.results.subjects.filter((subject) => subject.grade === 'C')[0]
Moment.js now supports TypeScript in v2.14.1.
It may very well be a mistake on the original author, however the notion that 1 is true and 0 is false is not a universal concept. In shell scripting 0 is returned for success, and any other number for failure. In other languages such as Ruby, only nil and false are considered false, and any other value is considered true, so in Ruby both 1 and 0 would be considered true.
It doesn't sound like you're working with a list of lists, so I'll keep this short. You want to use pop since it will remove elements not elements that are lists, you should use del for that. To call the last element in python it's "-1"
>>> test = ['item1', 'item2']
>>> test.pop(-1)
'item2'
>>> test
['item1']
for XML android
android:src="@drawable/foto1"
android:layout_width="match_parent"
android:layout_height="match_parent"
android:scaleType="centerCrop"
Suppose we want to run your Django web server (in Linux) that there is space between your path (path='/home/<you>/<first-path-section> <second-path-section>'
), so do the following:
import subprocess
args = ['{}/manage.py'.format('/home/<you>/<first-path-section> <second-path-section>'), 'runserver']
res = subprocess.Popen(args, stdout=subprocess.PIPE)
output, error_ = res.communicate()
if not error_:
print(output)
else:
print(error_)
[Note]:
chmod 755 -R <'yor path'>
manage.py
is exceutable: chmod +x manage.py
Here are some more examples
Run every 6 hours at 46 mins past the hour:
46 */6 * * *
Run at 2:10 am:
10 2 * * *
Run at 3:15 am:
15 3 * * *
Run at 4:20 am:
20 4 * * *
Run at 5:31 am:
31 5 * * *
Run at 5:31 pm:
31 17 * * *
The answer of Mintir4 is fine, I would also do the following to load the file.
FileInputStream fis = myContext.openFileInput(fn);
BufferedReader r = new BufferedReader(new InputStreamReader(fis));
String s = "";
while ((s = r.readLine()) != null) {
txt += s;
}
r.close();
Lets think your response is "successData". This contains a list which you need to add as options in a dropdown menu.
success: function (successData) {
var sizeOfData = successData.length;
if (sizeOfData == 0) {
// NO DATA, throw an alert ...
alert ("No Data Found");
} else {
$.each(successData, function(val, text) {
mySelect.append(
$('<option></option>').val(val).html(text)
);
});
} }
This would work for you ....
for object "pega" that provides StartRunning(), StopRunning(), boolean getIsRunning() and integer getProgress100() returning value in range of 0 to 100, this provides text progress bar while running...
now = time.time()
timeout = now + 30.0
last_progress = -1
pega.StartRunning()
while now < timeout and pega.getIsRunning():
time.sleep(0.5)
now = time.time()
progress = pega.getTubProgress100()
if progress != last_progress:
print('\r'+'='*progress+'-'*(100-progress)+' ' + str(progress) + "% ", end='', flush=True)
last_progress = progress
pega.StopRunning()
progress = pega.getTubProgress100()
print('\r'+'='*progress+'-'*(100-progress)+' ' + str(progress) + "% ", flush=True)
compile 'com.google.code.gson:gson:2.6.2'
compile 'com.squareup.retrofit2:retrofit:2.1.0'// compulsory
compile 'com.squareup.retrofit2:converter-gson:2.1.0' //for retrofit conversion
Login APi Put Two Parameters
{
"UserId": "1234",
"Password":"1234"
}
Login Response
{
"UserId": "1234",
"FirstName": "Keshav",
"LastName": "Gera",
"ProfilePicture": "312.113.221.1/GEOMVCAPI/Files/1.500534651736E12p.jpg"
}
APIClient.java
import retrofit2.Retrofit;
import retrofit2.converter.gson.GsonConverterFactory;
class APIClient {
public static final String BASE_URL = "Your Base Url ";
private static Retrofit retrofit = null;
public static Retrofit getClient() {
if (retrofit == null) {
retrofit = new Retrofit.Builder()
.baseUrl(BASE_URL)
.addConverterFactory(GsonConverterFactory.create())
.build();
}
return retrofit;
}
}
APIInterface interface
interface APIInterface {
@POST("LoginController/Login")
Call<LoginResponse> createUser(@Body LoginResponse login);
}
Login Pojo
package pojos;
import com.google.gson.annotations.SerializedName;
public class LoginResponse {
@SerializedName("UserId")
public String UserId;
@SerializedName("FirstName")
public String FirstName;
@SerializedName("LastName")
public String LastName;
@SerializedName("ProfilePicture")
public String ProfilePicture;
@SerializedName("Password")
public String Password;
@SerializedName("ResponseCode")
public String ResponseCode;
@SerializedName("ResponseMessage")
public String ResponseMessage;
public LoginResponse(String UserId, String Password) {
this.UserId = UserId;
this.Password = Password;
}
public String getUserId() {
return UserId;
}
public String getFirstName() {
return FirstName;
}
public String getLastName() {
return LastName;
}
public String getProfilePicture() {
return ProfilePicture;
}
public String getResponseCode() {
return ResponseCode;
}
public String getResponseMessage() {
return ResponseMessage;
}
}
MainActivity
package com.keshav.retrofitloginexampleworkingkeshav;
import android.app.Dialog;
import android.os.Bundle;
import android.support.v7.app.AppCompatActivity;
import android.util.Log;
import android.view.View;
import android.widget.Button;
import android.widget.EditText;
import android.widget.TextView;
import android.widget.Toast;
import pojos.LoginResponse;
import retrofit2.Call;
import retrofit2.Callback;
import retrofit2.Response;
import utilites.CommonMethod;
public class MainActivity extends AppCompatActivity {
TextView responseText;
APIInterface apiInterface;
Button loginSub;
EditText et_Email;
EditText et_Pass;
private Dialog mDialog;
String userId;
String password;
@Override
protected void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_main);
apiInterface = APIClient.getClient().create(APIInterface.class);
loginSub = (Button) findViewById(R.id.loginSub);
et_Email = (EditText) findViewById(R.id.edtEmail);
et_Pass = (EditText) findViewById(R.id.edtPass);
loginSub.setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View v) {
if (checkValidation()) {
if (CommonMethod.isNetworkAvailable(MainActivity.this))
loginRetrofit2Api(userId, password);
else
CommonMethod.showAlert("Internet Connectivity Failure", MainActivity.this);
}
}
});
}
private void loginRetrofit2Api(String userId, String password) {
final LoginResponse login = new LoginResponse(userId, password);
Call<LoginResponse> call1 = apiInterface.createUser(login);
call1.enqueue(new Callback<LoginResponse>() {
@Override
public void onResponse(Call<LoginResponse> call, Response<LoginResponse> response) {
LoginResponse loginResponse = response.body();
Log.e("keshav", "loginResponse 1 --> " + loginResponse);
if (loginResponse != null) {
Log.e("keshav", "getUserId --> " + loginResponse.getUserId());
Log.e("keshav", "getFirstName --> " + loginResponse.getFirstName());
Log.e("keshav", "getLastName --> " + loginResponse.getLastName());
Log.e("keshav", "getProfilePicture --> " + loginResponse.getProfilePicture());
String responseCode = loginResponse.getResponseCode();
Log.e("keshav", "getResponseCode --> " + loginResponse.getResponseCode());
Log.e("keshav", "getResponseMessage --> " + loginResponse.getResponseMessage());
if (responseCode != null && responseCode.equals("404")) {
Toast.makeText(MainActivity.this, "Invalid Login Details \n Please try again", Toast.LENGTH_SHORT).show();
} else {
Toast.makeText(MainActivity.this, "Welcome " + loginResponse.getFirstName(), Toast.LENGTH_SHORT).show();
}
}
}
@Override
public void onFailure(Call<LoginResponse> call, Throwable t) {
Toast.makeText(getApplicationContext(), "onFailure called ", Toast.LENGTH_SHORT).show();
call.cancel();
}
});
}
public boolean checkValidation() {
userId = et_Email.getText().toString();
password = et_Pass.getText().toString();
Log.e("Keshav", "userId is -> " + userId);
Log.e("Keshav", "password is -> " + password);
if (et_Email.getText().toString().trim().equals("")) {
CommonMethod.showAlert("UserId Cannot be left blank", MainActivity.this);
return false;
} else if (et_Pass.getText().toString().trim().equals("")) {
CommonMethod.showAlert("password Cannot be left blank", MainActivity.this);
return false;
}
return true;
}
}
CommonMethod.java
public class CommonMethod {
public static final String DISPLAY_MESSAGE_ACTION =
"com.codecube.broking.gcm";
public static final String EXTRA_MESSAGE = "message";
public static boolean isNetworkAvailable(Context ctx) {
ConnectivityManager connectivityManager
= (ConnectivityManager)ctx.getSystemService(Context.CONNECTIVITY_SERVICE);
NetworkInfo activeNetworkInfo = connectivityManager.getActiveNetworkInfo();
return activeNetworkInfo != null && activeNetworkInfo.isConnected();
}
public static void showAlert(String message, Activity context) {
final AlertDialog.Builder builder = new AlertDialog.Builder(context);
builder.setMessage(message).setCancelable(false)
.setPositiveButton("OK", new DialogInterface.OnClickListener() {
public void onClick(DialogInterface dialog, int id) {
}
});
try {
builder.show();
} catch (Exception e) {
e.printStackTrace();
}
}
}
activity_main.xml
<LinearLayout android:layout_width="wrap_content"
android:layout_height="match_parent"
android:focusable="true"
android:focusableInTouchMode="true"
android:orientation="vertical"
xmlns:android="http://schemas.android.com/apk/res/android">
<ImageView
android:id="@+id/imgLogin"
android:layout_width="200dp"
android:layout_height="150dp"
android:layout_gravity="center"
android:layout_marginTop="20dp"
android:padding="5dp"
android:background="@mipmap/ic_launcher_round"
/>
<TextView
android:id="@+id/txtLogo"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:layout_below="@+id/imgLogin"
android:layout_centerHorizontal="true"
android:text="Holostik Track and Trace"
android:textSize="20dp"
android:visibility="gone" />
<android.support.design.widget.TextInputLayout
android:id="@+id/textInputLayout1"
android:layout_width="fill_parent"
android:layout_height="wrap_content"
android:layout_marginLeft="@dimen/box_layout_margin_left"
android:layout_marginRight="@dimen/box_layout_margin_right"
android:layout_marginTop="8dp"
android:padding="@dimen/text_input_padding">
<EditText
android:id="@+id/edtEmail"
android:layout_width="fill_parent"
android:layout_height="wrap_content"
android:layout_marginTop="5dp"
android:ems="10"
android:fontFamily="sans-serif"
android:gravity="top"
android:hint="Login ID"
android:maxLines="10"
android:paddingLeft="@dimen/edit_input_padding"
android:paddingRight="@dimen/edit_input_padding"
android:paddingTop="@dimen/edit_input_padding"
android:singleLine="true"></EditText>
</android.support.design.widget.TextInputLayout>
<android.support.design.widget.TextInputLayout
android:id="@+id/textInputLayout2"
android:layout_width="fill_parent"
android:layout_height="wrap_content"
android:layout_below="@+id/textInputLayout1"
android:layout_marginLeft="@dimen/box_layout_margin_left"
android:layout_marginRight="@dimen/box_layout_margin_right"
android:padding="@dimen/text_input_padding">
<EditText
android:id="@+id/edtPass"
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:focusable="true"
android:fontFamily="sans-serif"
android:hint="Password"
android:inputType="textPassword"
android:singleLine="true" />
</android.support.design.widget.TextInputLayout>
<RelativeLayout
android:id="@+id/rel12"
android:layout_width="wrap_content"
android:layout_height="wrap_content"
android:layout_below="@+id/textInputLayout2"
android:layout_marginTop="10dp"
android:layout_marginLeft="10dp"
>
<Button
android:id="@+id/loginSub"
android:layout_width="wrap_content"
android:layout_height="45dp"
android:layout_alignParentRight="true"
android:layout_centerVertical="true"
android:background="@drawable/border_button"
android:paddingLeft="30dp"
android:paddingRight="30dp"
android:layout_marginRight="10dp"
android:text="Login"
android:textColor="#ffffff" />
</RelativeLayout>
</LinearLayout>
This simple way...
var string = "{firstName:'name1', lastName:'last1'}";
eval('var obj='+string);
alert(obj.firstName);
output
name1
You need the following jar files in the classpath:
string hex = "#FFFFFF";
Color _color = System.Drawing.ColorTranslator.FromHtml(hex);
Note: the hash is important!
private void clearBackStack(){
SupportFragmentManaer fm = getSupportFragmentManager();
fm.popBackStack(null, FragmentManager.POP_BACK_STACK_INCLUSIVE);
}
Call to this method would be very neat.
Disclaimer: I first wrote this and then stumbled upon this question. I thought this solution wasn't yet posted, and saw that tlwhitec did post a similar answer. Still I'm posting this because I hope it's a useful and thorough explanation.
Short answer:
This seems quite a portable solution, as it works on quite some shells (see comment).
This way you can get a real newline into a variable.
The benefit of this solution is that you don't have to use newlines in your source code, so you can indent your code any way you want, and the solution still works. This makes it robust. It's also portable.
# Robust way to put a real newline in a variable (bash, dash, ksh, zsh; indentation-resistant).
nl="$(printf '\nq')"
nl=${nl%q}
Longer answer:
Explanation of the above solution:
The newline would normally lost due to command substitution, but to prevent that, we add a 'q' and remove it afterwards. (The reason for the double quotes is explained further below.)
We can prove that the variable contains an actual newline character (0x0A):
printf '%s' "$nl" | hexdump -C
00000000 0a |.|
00000001
(Note that the '%s'
was needed, otherwise printf will translate a literal '\n'
string into an actual 0x0A character, meaning we would prove nothing.)
Of course, instead of the solution proposed in this answer, one could use this as well (but...):
nl='
'
... but that's less robust and can be easily damaged by accidentally indenting the code, or by forgetting to dedent it afterwards, which makes it inconvenient to use in (indented) functions, whereas the earlier solution is robust.
Now, as for the double quotes:
The reason for the double quotes "
surrounding the command substitution as in nl="$(printf '\nq')"
is that you can then even prefix the variable assignment with the local
keyword or builtin (such as in functions), and it will still work on all shells, whereas otherwise the dash
shell would have trouble, in the sense that dash would otherwise lose the 'q' and you'd end up with an empty 'nl' variable (again, due to command substitution).
That issue is better illustrated with another example:
dash_trouble_example() {
e=$(echo hello world) # Not using 'local'.
echo "$e" # Fine. Outputs 'hello world' in all shells.
local e=$(echo hello world) # But now, when using 'local' without double quotes ...:
echo "$e" # ... oops, outputs just 'hello' in dash,
# ... but 'hello world' in bash and zsh.
local f="$(echo hello world)" # Finally, using 'local' and surrounding with double quotes.
echo "$f" # Solved. Outputs 'hello world' in dash, zsh, and bash.
# So back to our newline example, if we want to use 'local', we need
# double quotes to surround the command substitution:
# (If we didn't use double quotes here, then in dash the 'nl' variable
# would be empty.)
local nl="$(printf '\nq')"
nl=${nl%q}
}
Practical example of the above solution:
# Parsing lines in a for loop by setting IFS to a real newline character:
nl="$(printf '\nq')"
nl=${nl%q}
IFS=$nl
for i in $(printf '%b' 'this is line 1\nthis is line 2'); do
echo "i=$i"
done
# Desired output:
# i=this is line 1
# i=this is line 2
# Exercise:
# Try running this example without the IFS=$nl assignment, and predict the outcome.
@@ -1,2 +3,4 @@
part of the diff
This part took me a while to understand, so I've created a minimal example.
The format is basically the same the diff -u
unified diff.
For instance:
diff -u <(seq 16) <(seq 16 | grep -Ev '^(2|3|14|15)$')
Here we removed lines 2, 3, 14 and 15. Output:
@@ -1,6 +1,4 @@
1
-2
-3
4
5
6
@@ -11,6 +9,4 @@
11
12
13
-14
-15
16
@@ -1,6 +1,4 @@
means:
-1,6
means that this piece of the first file starts at line 1 and shows a total of 6 lines. Therefore it shows lines 1 to 6.
1
2
3
4
5
6
-
means "old", as we usually invoke it as diff -u old new
.
+1,4
means that this piece of the second file starts at line 1 and shows a total of 4 lines. Therefore it shows lines 1 to 4.
+
means "new".
We only have 4 lines instead of 6 because 2 lines were removed! The new hunk is just:
1
4
5
6
@@ -11,6 +9,4 @@
for the second hunk is analogous:
on the old file, we have 6 lines, starting at line 11 of the old file:
11
12
13
14
15
16
on the new file, we have 4 lines, starting at line 9 of the new file:
11
12
13
16
Note that line 11
is the 9th line of the new file because we have already removed 2 lines on the previous hunk: 2 and 3.
Hunk header
Depending on your git version and configuration, you can also get a code line next to the @@
line, e.g. the func1() {
in:
@@ -4,7 +4,6 @@ func1() {
This can also be obtained with the -p
flag of plain diff
.
Example: old file:
func1() {
1;
2;
3;
4;
5;
6;
7;
8;
9;
}
If we remove line 6
, the diff shows:
@@ -4,7 +4,6 @@ func1() {
3;
4;
5;
- 6;
7;
8;
9;
Note that this is not the correct line for func1
: it skipped lines 1
and 2
.
This awesome feature often tells exactly to which function or class each hunk belongs, which is very useful to interpret the diff.
How the algorithm to choose the header works exactly is discussed at: Where does the excerpt in the git diff hunk header come from?
Place the link location in the action=""
of a wrapping form
tag.
Your first link would be:
<form action="1.html">
<input type="submit" class="button_active" value="1">
</form>
(del
can be your friend, as it marks objects as being deletable when there no other references to them. Now, often the CPython interpreter keeps this memory for later use, so your operating system might not see the "freed" memory.)
Maybe you would not run into any memory problem in the first place by using a more compact structure for your data.
Thus, lists of numbers are much less memory-efficient than the format used by the standard array
module or the third-party numpy
module. You would save memory by putting your vertices in a NumPy 3xN array and your triangles in an N-element array.
// Due to this Code ): Syntax problem.
$('.myClass', '.myOtherClass').removeClass('theclass');
According to jQuery documentation: https://api.jquery.com/multiple-selector/
When can select multiple classes in this way:
jQuery(“selector1, selector2, selectorN”) // double Commas. // IS valid.
jQuery('selector1, selector2, selectorN') // single Commas. // Is valid.
by enclosing all the selectors in a single '...' ' or double commas, "..."
So in your case the correct way to call multiple classes is:
$('.myClass', '.myOtherClass').removeClass('theclass'); // your Code // Invalid.
$('.myClass , .myOtherClass').removeClass('theclass'); // Correct Code // Is valid.
From the doc.
The webbrowser module provides a high-level interface to allow displaying Web-based documents to users. Under most circumstances, simply calling the open() function from this module will do the right thing.
You have to import the module and use open()
function. This will open https://nabinkhadka.com.np in the browser.
To open in new tab:
import webbrowser
webbrowser.open('https://nabinkhadka.com.np', new = 2)
Also from the doc.
If new is 0, the url is opened in the same browser window if possible. If new is 1, a new browser window is opened if possible. If new is 2, a new browser page (“tab”) is opened if possible
So according to the value of new, you can either open page in same browser window or in new tab etc.
Also you can specify as which browser (chrome, firebox, etc.) to open. Use get() function for this.
The psycopg2 module has its own timezone definitions, so I ended up writing my own wrapper around utcnow:
def pg_utcnow():
import psycopg2
return datetime.utcnow().replace(
tzinfo=psycopg2.tz.FixedOffsetTimezone(offset=0, name=None))
and just use pg_utcnow
whenever you need the current time to compare against a PostgreSQL timestamptz
I have no serial device here to test it, but if you have python and dbus you can try it yourself.
import dbus
bus = dbus.SystemBus()
hwmanager = bus.get_object('org.freedesktop.Hal', '/org/freedesktop/Hal/Manager')
hwmanager_i = dbus.Interface(hwmanager, 'org.freedesktop.Hal.Manager')
print hwmanager_i.FindDeviceByCapability("serial")
If it fails you can search inside hwmanager_i.GetAllDevicesWithProperties()
to see if the capability name "serial" that I just guessed has a different name.
HTH
Just add overflow:hidden
to the table with border-radius
.
.tablewithradius {
overflow:hidden ;
border-radius: 15px;
}
It is not allocating memory at assignment of value 12 to integer pointer. Therefore it crashes, because it's not finding any memory.
You can try this:
#include<stdio.h>
#include<stdlib.h>
int *fun();
int main()
{
int *ptr;
ptr=fun();
printf("\n\t\t%d\n",*ptr);
}
int *fun()
{
int ptr;
ptr=12;
return(&ptr);
}
Are you using position: relative
?
Try to set position: relative
and then z-index because you want this div has a z-index in relation with other div.
By the way, your browser is important to check if it working or not. Neither IE or Firefox is a good one.
If you know the values at compile time you can do :
float[] values = {0.1f, 0.2f, 0.3f};
There is no way to do that if values are variables in runtime.
Not a general answer, but may be useful for the specific case where you are happy with the default python 2 encoding, but want to specify utf-8 for python 3:
if sys.version_info.major > 2:
do_open = lambda filename: open(filename, encoding='utf-8')
else:
do_open = lambda filename: open(filename)
with do_open(filename) as file:
pass
Microsoft finally heard you!
Now with C# 7 you can:
switch(shape)
{
case Circle c:
WriteLine($"circle with radius {c.Radius}");
break;
case Rectangle s when (s.Length == s.Height):
WriteLine($"{s.Length} x {s.Height} square");
break;
case Rectangle r:
WriteLine($"{r.Length} x {r.Height} rectangle");
break;
default:
WriteLine("<unknown shape>");
break;
case null:
throw new ArgumentNullException(nameof(shape));
}
You can do something like this.
$a = start-process -NoNewWindow powershell {timeout 10; 'done'} -PassThru
And if you want to wait for it:
$a | wait-process
Bonus osx or linux version:
$a = start-process pwsh '-c',{start-sleep 5; 'done'} -PassThru
Example pinger script I have. The args are passed as an array:
$1 = start -n powershell pinger,comp001 -pa
For Kotlin devs: To allow Hibernate to inherit from the @Entity types that you want to be lazy-loadable they have to be inheritable/open
, which they in Kotlin by default are not. To work around this issue we can make use of the all-open
compiler plugin and instruct it to also handle the JPA annotations by adding this to our build.gradle
:
allOpen {
annotation("javax.persistence.Entity")
annotation("javax.persistence.MappedSuperclass")
annotation("javax.persistence.Embeddable")
}
If you are using Kotlin and Spring like me, you are most probably also using the kotlin-jpa
/no-args
and kotlin-spring
/all-open
compiler plugins already. However, you will still need to add the above lines, as that combination of plugins neither makes such classes open
.
Read the great article of Léo Millon for further explanations.
var d = new Date(2011,10,30);
as months are indexed from 0 in js.
Use below code.
NSString* myString;
myString = [[NSString alloc] initWithData:nsdata encoding:NSASCIIStringEncoding];
This works for me, another solution not mentioned. Just throw it in the click event...
$(this).trigger("blur");
Or call it from another event/method...
$(".btn_name").trigger("blur");
In case you want a constructor with properties, you need to do the following:
Place your cursor in any empty line in a class;
Press Ctrl + . to trigger the Quick Actions and Refactorings menu;
Select Generate constructor from the drop-down menu;
Pick the members you want to include as constructor parameters. You can order them using the up and down arrows. Choose OK.
The constructor is created with the specified parameters.
gettimeofday() will probably do what you want.
If you're on Intel hardware, here's how to read the CPU real-time instruction counter. It will tell you the number of CPU cycles executed since the processor was booted. This is probably the finest-grained, lowest overhead counter you can get for performance measurement.
Note that this is the number of CPU cycles. On linux you can get the CPU speed from /proc/cpuinfo and divide to get the number of seconds. Converting this to a double is quite handy.
When I run this on my box, I get
11867927879484732 11867927879692217 it took this long to call printf: 207485
Here's the Intel developer's guide that gives tons of detail.
#include <stdio.h>
#include <stdint.h>
inline uint64_t rdtsc() {
uint32_t lo, hi;
__asm__ __volatile__ (
"xorl %%eax, %%eax\n"
"cpuid\n"
"rdtsc\n"
: "=a" (lo), "=d" (hi)
:
: "%ebx", "%ecx");
return (uint64_t)hi << 32 | lo;
}
main()
{
unsigned long long x;
unsigned long long y;
x = rdtsc();
printf("%lld\n",x);
y = rdtsc();
printf("%lld\n",y);
printf("it took this long to call printf: %lld\n",y-x);
}
You can add this in Post Model,
public function categories()
{
return $this->belongsToMany('App\Category','category_post','post_id','category_id');
}
category_post
indicate the table you want to use.
post_id
indicate the column where you want to store the posts id.
category_id
indicate the column where you want to store the categories id.
This has a good general description: https://gephi.wordpress.com/tag/maven/
Let me make a few statement that can put the difference in focus:
We migrated our code base from Ant to Maven
All 3rd party librairies have been uploaded to Nexus. Maven is using Nexus as a source for libraries.
Basic functionalities of a repository manager like Sonatype are:
To find out who's making inotify instances, try this command (source):
for foo in /proc/*/fd/*; do readlink -f $foo; done | grep inotify | sort | uniq -c | sort -nr
Mine looked like this:
25 /proc/2857/fd/anon_inode:inotify
9 /proc/2880/fd/anon_inode:inotify
4 /proc/1375/fd/anon_inode:inotify
3 /proc/1851/fd/anon_inode:inotify
2 /proc/2611/fd/anon_inode:inotify
2 /proc/2414/fd/anon_inode:inotify
1 /proc/2992/fd/anon_inode:inotify
Using ps -p 2857
, I was able to identify process 2857 as sublime_text
. Only after closing all sublime windows was I able to run my node script.
NEW_VAR=""
if [[ ${ENV_VAR} && ${ENV_VAR-x} ]]; then
NEW_VAR=${ENV_VAR}
else
NEW_VAR="new value"
fi
resolved this issue by clicking on "File->Sync Project with Gradle Files"
Some RFID chips are read-write, the majority are read-only. You can find out if your chip is read-only by checking the datasheet.
DateTimeFormat
, introduced in java 8:The idea is to define two formats: one for the input format, and one for the output format. Parse with the input formatter, then format with the output formatter.
Your input format looks quite standard, except the trailing Z
. Anyway, let's deal with this: "yyyy-MM-dd'T'HH:mm:ss.SSS'Z'"
. The trailing 'Z'
is the interesting part. Usually there's time zone data here, like -0700
. So the pattern would be ...Z
, i.e. without apostrophes.
The output format is way more simple: "dd-MM-yyyy"
. Mind the small y
-s.
Here is the example code:
DateTimeFormatter inputFormatter = DateTimeFormatter.ofPattern("yyyy-MM-dd'T'HH:mm:ss.SSS'Z'", Locale.ENGLISH);
DateTimeFormatter outputFormatter = DateTimeFormatter.ofPattern("dd-MM-yyy", Locale.ENGLISH);
LocalDate date = LocalDate.parse("2018-04-10T04:00:00.000Z", inputFormatter);
String formattedDate = outputFormatter.format(date);
System.out.println(formattedDate); // prints 10-04-2018
SimpleDateFormat
SimpleDateFormat inputFormat = new SimpleDateFormat("yyyy-MM-dd'T'HH:mm:ss.SSS'Z'");
SimpleDateFormat outputFormat = new SimpleDateFormat("dd-MM-yyyy");
Date date = inputFormat.parse("2018-04-10T04:00:00.000Z");
String formattedDate = outputFormat.format(date);
System.out.println(formattedDate); // prints 10-04-2018
Instead of step="any"
, which allows for any number of decimal places, use step=".01"
, which allows up to two decimal places.
More details in the spec: https://www.w3.org/TR/html/sec-forms.html#the-step-attribute
My understanding is that this isn't easy at all to do cross-browser. Instead of trying to manipulate the checkbox control, you could always build your own implementation using images, javascript, and hidden input fields. I'm assuming this is similar to what niceforms is (from Staicu lonut's answer above), but wouldn't be particularly difficult to implement. I believe jQuery has a plugin to allow for this custom behavior as well (will look for the link and post here if I can find it).
You can use Mockito.isA()
for that:
import static org.mockito.Matchers.isA;
import static org.mockito.Mockito.verify;
verify(bar).doStuff(isA(Foo[].class));
http://site.mockito.org/mockito/docs/current/org/mockito/Matchers.html#isA(java.lang.Class)
Check out the request module.
It's more full featured than node's built-in http client.
var request = require('request');
var propertiesObject = { field1:'test1', field2:'test2' };
request({url:url, qs:propertiesObject}, function(err, response, body) {
if(err) { console.log(err); return; }
console.log("Get response: " + response.statusCode);
});
Why so complicated?
I solved my problem this way simply:
<pre>{{existingCategory+thisCategory}}</pre>
It will make <br />
automatically if the string contains '\n' that contain when I was saving data from textarea.
Classic example "Index in Books"
Consider a "Book" of 1000 pages, divided by 10 Chapters, each section with 100 pages.
Simple, huh?
Now, imagine you want to find a particular Chapter that contains a word "Alchemist". Without an index page, you have no other option than scanning through the entire book/Chapters. i.e: 1000 pages.
This analogy is known as "Full Table Scan" in database world.
But with an index page, you know where to go! And more, to lookup any particular Chapter that matters, you just need to look over the index page, again and again, every time. After finding the matching index you can efficiently jump to that chapter by skipping the rest.
But then, in addition to actual 1000 pages, you will need another ~10 pages to show the indices, so totally 1010 pages.
Thus, the index is a separate section that stores values of indexed column + pointer to the indexed row in a sorted order for efficient look-ups.
Things are simple in schools, isn't it? :P
Not CSS, but inline:
<a href="#"
onmouseover = "this.style.textDecoration = 'none'"
onmouseout = "this.style.textDecoration = 'underline'">Hello</a>
Hope this will help you..
var list = [];
$(document).ready(function () {
$('#test').click(function () {
var oRows = $('#MainContent_Table1 tr').length;
$('#MainContent_Table1 tr').each(function (index) {
list.push(this.cells[0].innerHTML);
});
});
});
select @EmpID = ID from dbo.Employee
Or
set @EmpID =(select id from dbo.Employee)
Note that the select query might return more than one value or rows. so you can write a select query that must return one row.
If you would like to add more columns to one variable(MS SQL), there is an option to use table defined variable
DECLARE @sampleTable TABLE(column1 type1)
INSERT INTO @sampleTable
SELECT columnsNumberEqualInsampleTable FROM .. WHERE ..
As table type variable do not exist in Oracle and others, you would have to define it:
DECLARE TYPE type_name IS TABLE OF (column_type | variable%TYPE | table.column%TYPE [NOT NULL] INDEX BY BINARY INTEGER;
-- Then to declare a TABLE variable of this type: variable_name type_name;
-- Assigning values to a TABLE variable: variable_name(n).field_name := 'some text'
;
-- Where 'n' is the index value
since some minor explanations were missing
Use @Deprecated
annotation on the method like this
/**
* @param basePrice
*
* @deprecated reason this method is deprecated <br/>
* {will be removed in next version} <br/>
* use {@link #setPurchasePrice()} instead like this:
*
*
* <blockquote><pre>
* getProduct().setPurchasePrice(200)
* </pre></blockquote>
*
*/
@Deprecated
public void setBaseprice(int basePrice) {
}
<br/>
{@link #setPurchasePrice()}
Variables and properties
1/ Keeping your headers clean, hiding implementation
Don't include instance variables in your header. Private variables put into class continuation as properties. Public variables declare as public properties in your header.
If it should be only read, declare it as readonly and overwrite it as readwrite in class continutation.
Basically I am not using variables at all, only properties.
2/ Give your properties a non-default variable name, example:
@synthesize property = property_;
Reason 1: You will catch errors caused by forgetting "self." when assigning the property. Reason 2: From my experiments, Leak Analyzer in Instruments has problems to detect leaking property with default name.
3/ Never use retain or release directly on properties (or only in very exceptional situations). In your dealloc just assign them a nil. Retain properties are meant to handle retain/release by themselves. You never know if a setter is not, for example, adding or removing observers. You should use the variable directly only inside its setter and getter.
Views
1/ Put every view definition into a xib, if you can (the exception is usually dynamic content and layer settings). It saves time (it's easier than writing code), it's easy to change and it keeps your code clean.
2/ Don't try to optimize views by decreasing the number of views. Don't create UIImageView in your code instead of xib just because you want to add subviews into it. Use UIImageView as background instead. The view framework can handle hundreds of views without problems.
3/ IBOutlets don't have to be always retained (or strong). Note that most of your IBOutlets are part of your view hierarchy and thus implicitly retained.
4/ Release all IBOutlets in viewDidUnload
5/ Call viewDidUnload from your dealloc method. It is not implicitly called.
Memory
1/ Autorelease objects when you create them. Many bugs are caused by moving your release call into one if-else branch or after a return statement. Release instead of autorelease should be used only in exceptional situations - e.g. when you are waiting for a runloop and you don't want your object to be autoreleased too early.
2/ Even if you are using Authomatic Reference Counting, you have to understand perfectly how retain-release methods work. Using retain-release manually is not more complicated than ARC, in both cases you have to thing about leaks and retain-cycles. Consider using retain-release manually on big projects or complicated object hierarchies.
Comments
1/ Make your code autodocumented. Every variable name and method name should tell what it is doing. If code is written correctly (you need a lot of practice in this), you won't need any code comments (not the same as documentation comments). Algorithms can be complicated but the code should be always simple.
2/ Sometimes, you'll need a comment. Usually to describe a non apparent code behavior or hack. If you feel you have to write a comment, first try to rewrite the code to be simpler and without the need of comments.
Indentation
1/ Don't increase indentation too much. Most of your method code should be indented on the method level. Nested blocks (if, for etc.) decrease readability. If you have three nested blocks, you should try to put the inner blocks into a separate method. Four or more nested blocks should be never used. If most of your method code is inside of an if, negate the if condition, example:
if (self) {
//... long initialization code ...
}
return self;
if (!self) {
return nil;
}
//... long initialization code ...
return self;
Understand C code, mainly C structs
Note that Obj-C is only a light OOP layer over C language. You should understand how basic code structures in C work (enums, structs, arrays, pointers etc). Example:
view.frame = CGRectMake(view.frame.origin.x, view.frame.origin.y, view.frame.size.width, view.frame.size.height + 20);
is the same as:
CGRect frame = view.frame;
frame.size.height += 20;
view.frame = frame;
And many more
Mantain your own coding standards document and update it often. Try to learn from your bugs. Understand why a bug was created and try to avoid it using coding standards.
Our coding standards have currently about 20 pages, a mix of Java Coding Standards, Google Obj-C/C++ Standards and our own addings. Document your code, use standard standard indentation, white spaces and blank lines on the right places etc.
The Simplest Way to do that
Now you will be able to resize the TextBox vertically as you wish.
Instead of setting the ng-model to item.size.code, how about setting it to size:
<select ng-options="size as size.name for size in sizes"
ng-model="item" ng-change="update()"></select>
Then in your update()
method, $scope.item
will be set to the currently selected item.
And whatever code needed item.size.code
, can get that property via $scope.item.code
.
Update based on more info in comments:
Use some other $scope property for your select ng-model then:
<select ng-options="size as size.name for size in sizes"
ng-model="selectedItem" ng-change="update()"></select>
Controller:
$scope.update = function() {
$scope.item.size.code = $scope.selectedItem.code
// use $scope.selectedItem.code and $scope.selectedItem.name here
// for other stuff ...
}
I faced the same problem, but when i was lokking for php.ini and php.exe i found php.exe at C:\UwAmp\bin\php\php-5.4.15 when php.ini at C:\UwAmp\bin\apache. I just copy php.ini at C:\UwAmp\bin\php\php-5.4.15 and Uncomment the line extension=php_openssl.dll and it fixed.
If you dont want to set your toolbar as action bar using setSupportActionBar, you can add a logo next to your navigation icon (if you have a back button for example) like this:
toolbar.setLogo();
or in xml
<android.support.v7.widget.Toolbar
....
android:logo="@drawable/logo"
app:logo="@drawable/logo"/>
And even if you have a title set on the Toolbar, the the title will still show.
Ex: The green check in the image below is the logo
As the main question:
Anybody know why this is not allowed?
is still not answered, I did a quick search and found a relatively new addition from a MySQL developer at MySQL Bugs:
[17 Mar 2017 15:11] Ståle Deraas
Posted by developer:
This is indeed a valid feature request, and at first glance it might seem trivial to add. But TEXT/BLOBS values are not stored directly in the record buffer used for reading/updating tables. So it is a bit more complex to assign default values for them.
This is no definite answer, but at least a starting point for the why question.
In the mean time, I'll just code around it and either make the column nullable or explicitly assign a (default ''
) value for each insert
from the application code...
It is a bug in Eclipse. I had exactly the same problem, also on Ubuntu with Eclipse Java EE Juno.
Here is the workaround that worked for me:
{workspace-directory}/.metadata/.plugins/org.eclipse.core.runtime/.settings
delete the following two files:
org.eclipse.wst.server.core.prefs
org.eclipse.jst.server.tomcat.core.prefs
Source: eclipse.org Forum
I know it's late but hope it will help someone else...
This is my code: It takes two by two hex representations contained in String and add those into byte array. It works perfectly for me.
public byte[] stringToByteArray (String s) {
byte[] byteArray = new byte[s.length()/2];
String[] strBytes = new String[s.length()/2];
int k = 0;
for (int i = 0; i < s.length(); i=i+2) {
int j = i+2;
strBytes[k] = s.substring(i,j);
byteArray[k] = (byte)Integer.parseInt(strBytes[k], 16);
k++;
}
return byteArray;
}
if [ [[ $HOST == user1 ]] -o [[ $HOST == node* ]] ];
then
echo yes
fi
doesn't work, because all of [
, [[
, and test
recognize the same nonrecursive grammar. See section CONDITIONAL EXPRESSIONS on your Bash man page.
As an aside, the SUSv3 says
The KornShell-derived conditional command (double bracket [[]]) was removed from the shell command language description in an early proposal. Objections were raised that the real problem is misuse of the test command ([), and putting it into the shell is the wrong way to fix the problem. Instead, proper documentation and a new shell reserved word (!) are sufficient.
Tests that require multiple test operations can be done at the shell level using individual invocations of the test command and shell logicals, rather than using the error-prone -o flag of test.
You'd need to write it this way, but test doesn't support it:
if [ $HOST == user1 -o $HOST == node* ];
then
echo yes
fi
test uses = for string equality, and more importantly it doesn't support pattern matching.
case
/ esac
has good support for pattern matching:
case $HOST in
user1|node*) echo yes ;;
esac
It has the added benefit that it doesn't depend on Bash, and the syntax is portable. From the Single Unix Specification, The Shell Command Language:
case word in
[(]pattern1) compound-list;;
[[(]pattern[ | pattern] ... ) compound-list;;] ...
[[(]pattern[ | pattern] ... ) compound-list]
esac
To make any CORS protocol to work, you need to have a OPTIONS method on every endpoint (or a global filter with this method) that will return those headers :
Access-Control-Allow-Origin: *
Access-Control-Allow-Methods: GET, POST, PUT, DELETE
Access-Control-Allow-Headers: content-type
The reason is that the browser will send first an OPTIONS request to 'test' your server and see the authorizations
While entering the identifier u have not selected proper view controller, just check once if done repeat the procedure once more.
Surprised that nobody mentioned that zoom: 1;
is useful for IE6-7, to solve most IE-only bugs by triggering hasLayout.
The key is the margin: 0 auto; on the inner div. A proof-of-concept example:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">
<body>
<div style="background-color: blue; width: 100%;">
<div style="background-color: yellow; width: 940px; margin: 0 auto;">
Test
</div>
</div>
</body>
</html>
As mentioned in other answers, you can use set
to list all the environment variables or use
set [environment_variable]
to get a specific variable with its value.
set [environment_variable]=
can be used to remove a variable from the workspace.
.getBoundingClientRect() returns the size of an element and its position relative to the viewport.We can easily get following
Example :
var element = d3.select('.elementClassName').node();
element.getBoundingClientRect().width;
99% of the time I would use XMLHttpRequest or fetch for something like this. However, there's an alternative solution which doesn't require javascript...
You could include a hidden iframe on your page and set the target attribute of your form to point to that iframe.
<style>
.hide { position:absolute; top:-1px; left:-1px; width:1px; height:1px; }
</style>
<iframe name="hiddenFrame" class="hide"></iframe>
<form action="receiver.pl" method="post" target="hiddenFrame">
<input name="signed" type="checkbox">
<input value="Save" type="submit">
</form>
There are very few scenarios where I would choose this route. Generally handling it with javascript is better because, with javascript you can...
You may use the following code to remove non-English letters:
import re
str = "123456790 ABC#%? .(???)"
result = re.sub(r'[^\x00-\x7f]',r'', str)
print(result)
This will return
123456790 ABC#%? .()
The answers are missing a specific time of day timer here is on the next hour:
NSCalendarUnit allUnits = NSCalendarUnitYear | NSCalendarUnitMonth |
NSCalendarUnitDay | NSCalendarUnitHour |
NSCalendarUnitMinute | NSCalendarUnitSecond;
NSCalendar *calendar = [[ NSCalendar alloc]
initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *weekdayComponents = [calendar components: allUnits
fromDate: [ NSDate date ] ];
[ weekdayComponents setHour: weekdayComponents.hour + 1 ];
[ weekdayComponents setMinute: 0 ];
[ weekdayComponents setSecond: 0 ];
NSDate *nextTime = [ calendar dateFromComponents: weekdayComponents ];
refreshTimer = [[ NSTimer alloc ] initWithFireDate: nextTime
interval: 0.0
target: self
selector: @selector( doRefresh )
userInfo: nil repeats: NO ];
[[NSRunLoop currentRunLoop] addTimer: refreshTimer forMode: NSDefaultRunLoopMode];
Of course, substitute "doRefresh" with your class's desired method
try to create the calendar object once and make the allUnits a static for efficiency.
adding one to hour component works just fine, no need for a midnight test (link)
This worked for me:
export _JAVA_OPTIONS="-Xmx1g"
It's important that you have no spaces because for me it did not work. I would suggest just copying and pasting. Then I ran:
java -XshowSettings:vm
and it will tell you:
Picked up _JAVA_OPTIONS: -Xmx1g
So I was having a similar issue and I managed to solve it by putting the script tag with my JS file after the closing body tag.
I assume it's because it makes sure there's something to reference, but I am not entirely sure.
Use document.activeElement
Should work.
P.S getElementById("myID")
not getElementById("#myID")
Use an extension method. They're the answer to everything, you know! ;)
public static class DateTimeExtensions
{
public static DateTime StartOfWeek(this DateTime dt, DayOfWeek startOfWeek)
{
int diff = (7 + (dt.DayOfWeek - startOfWeek)) % 7;
return dt.AddDays(-1 * diff).Date;
}
}
Which can be used as follows:
DateTime dt = DateTime.Now.StartOfWeek(DayOfWeek.Monday);
DateTime dt = DateTime.Now.StartOfWeek(DayOfWeek.Sunday);
In summary, the most reliable way to have MiniDLNA rescan all media files is by issuing the following set of commands:
$ sudo minidlnad -R
$ sudo service minidlna restart
However, every so often MiniDLNA will be running on a server. Here is a client-side script to request a rescan on such a server:
#!/usr/bin/env bash
ssh -t server.on.lan 'sudo minidlnad -R && sudo service minidlna restart'
You can get the pids
of all child processes of a given parent process <pid>
by reading the /proc/<pid>/task/<tid>/children
entry.
This file contain the pids of first level child processes.
For more information head over to https://lwn.net/Articles/475688/
They display fine here. Are you using the 64-bit version of Windows 7 along with the 32-bit version of TortoiseSVN? If so, then they will only show up in the 32-bit Explorer (or in the CFDs of 32-bit applications). You can install both 32-bit and 64-bit versions side-by-side, though.
The code below works for me (thanks to Christopher Zimmermann for his blog post http://dev.magnolia-cms.com/blog/2012/05/strategies-for-the-iframe-on-the-ipad-problem/). The problems are:
The PDF files are not centered (still working on it)
<!DOCTYPE HTML>
<html>
<head>
<title>Testing iFrames on iPad</title>
<style>
div {
border: solid 1px green;
height:100px;
}
.scroller{
border:solid 1px #66AA66;
height: 400px;
width: 400px;
overflow: auto;
text-align:center;
}
</style>
<table>
<tr>
<td><div class="scroller">
<iframe width="400" height="400" src="http://www.supremecourt.gov/opinions/11pdf/11-393c3a2.pdf" ></iframe>
</div>
</td>
<td><div class="scroller">
<iframe width="400" height="400" src="http://www.supremecourt.gov/opinions/11pdf/11-393c3a2.pdf" ></iframe>
</div>
</td>
</tr>
<tr>
<td><div class="scroller">
<iframe width="400" height="400" src="http://www.supremecourt.gov/opinions/11pdf/11-393c3a2.pdf" ></iframe>
</div>
</td>
<td><div class="scroller">
<iframe width="400" height="400" src="http://www.supremecourt.gov/opinions/11pdf/11-393c3a2.pdf" ></iframe>
</div>
</td>
</tr>
</table>
<div> Here are some additional contents.</div>
if any interested I've made a typescript version:
interface IResizeImageOptions {
maxSize: number;
file: File;
}
const resizeImage = (settings: IResizeImageOptions) => {
const file = settings.file;
const maxSize = settings.maxSize;
const reader = new FileReader();
const image = new Image();
const canvas = document.createElement('canvas');
const dataURItoBlob = (dataURI: string) => {
const bytes = dataURI.split(',')[0].indexOf('base64') >= 0 ?
atob(dataURI.split(',')[1]) :
unescape(dataURI.split(',')[1]);
const mime = dataURI.split(',')[0].split(':')[1].split(';')[0];
const max = bytes.length;
const ia = new Uint8Array(max);
for (var i = 0; i < max; i++) ia[i] = bytes.charCodeAt(i);
return new Blob([ia], {type:mime});
};
const resize = () => {
let width = image.width;
let height = image.height;
if (width > height) {
if (width > maxSize) {
height *= maxSize / width;
width = maxSize;
}
} else {
if (height > maxSize) {
width *= maxSize / height;
height = maxSize;
}
}
canvas.width = width;
canvas.height = height;
canvas.getContext('2d').drawImage(image, 0, 0, width, height);
let dataUrl = canvas.toDataURL('image/jpeg');
return dataURItoBlob(dataUrl);
};
return new Promise((ok, no) => {
if (!file.type.match(/image.*/)) {
no(new Error("Not an image"));
return;
}
reader.onload = (readerEvent: any) => {
image.onload = () => ok(resize());
image.src = readerEvent.target.result;
};
reader.readAsDataURL(file);
})
};
and here's the javascript result:
var resizeImage = function (settings) {
var file = settings.file;
var maxSize = settings.maxSize;
var reader = new FileReader();
var image = new Image();
var canvas = document.createElement('canvas');
var dataURItoBlob = function (dataURI) {
var bytes = dataURI.split(',')[0].indexOf('base64') >= 0 ?
atob(dataURI.split(',')[1]) :
unescape(dataURI.split(',')[1]);
var mime = dataURI.split(',')[0].split(':')[1].split(';')[0];
var max = bytes.length;
var ia = new Uint8Array(max);
for (var i = 0; i < max; i++)
ia[i] = bytes.charCodeAt(i);
return new Blob([ia], { type: mime });
};
var resize = function () {
var width = image.width;
var height = image.height;
if (width > height) {
if (width > maxSize) {
height *= maxSize / width;
width = maxSize;
}
} else {
if (height > maxSize) {
width *= maxSize / height;
height = maxSize;
}
}
canvas.width = width;
canvas.height = height;
canvas.getContext('2d').drawImage(image, 0, 0, width, height);
var dataUrl = canvas.toDataURL('image/jpeg');
return dataURItoBlob(dataUrl);
};
return new Promise(function (ok, no) {
if (!file.type.match(/image.*/)) {
no(new Error("Not an image"));
return;
}
reader.onload = function (readerEvent) {
image.onload = function () { return ok(resize()); };
image.src = readerEvent.target.result;
};
reader.readAsDataURL(file);
});
};
usage is like:
resizeImage({
file: $image.files[0],
maxSize: 500
}).then(function (resizedImage) {
console.log("upload resized image")
}).catch(function (err) {
console.error(err);
});
or (async
/await
):
const config = {
file: $image.files[0],
maxSize: 500
};
const resizedImage = await resizeImage(config)
console.log("upload resized image")
console.log()
calls process.stdout.write
with formatted output. See format()
in console.js for the implementation.
Currently (v0.10.ish):
Console.prototype.log = function() {
this._stdout.write(util.format.apply(this, arguments) + '\n');
};
You can enable connection logging. For SQL Server 2008, you can enable Login Auditing. In SQL Server Management Studio, open SQL Server Properties > Security > Login Auditing select "Both failed and successful logins".
Make sure to restart the SQL Server service.
Once you've done that, connection attempts should be logged into SQL's error log. The physical logs location can be determined here.
npm install node-sass
will do the job in most of the cases, as it will add missing sass npm dependency module doesn't exist or it will overwrite previous crashed version.
For Mac Users use sudo
in front of above commands.
On Windows machines npm rebuild node-sass --force
may not work for some users because it's essentially saying, "please force npm to rebuild the sass node module for me". It will not work because that module doesn't exist.
Whenever you did npm install
to the initial installation, the sass module did not get installed, which is why this problem occurs.
Setting an Initial Catalog allows you to set the database that queries run on that connection will use by default. If you do not set this for a connection to a server in which multiple databases are present, in many cases you will be required to have a USE statement in every query in order to explicitly declare which database you are trying to run the query on. The Initial Catalog setting is a good way of explicitly declaring a default database.
If you're not worried about a couple minutes time to do so, a solution would be to rm -rf node_modules
and npm install
again to rebuild the local modules.
CREATE TABLE table_temp_list_objects AS
SELECT o.owner, o.object_name FROM sys.all_objects o WHERE o.object_type ='TABLE';
We were having similar issues with Font Awesome on a static "cookie-less" domain when reading fonts from the "cookie domain" (www.domain.tld) and this post was our hero. See here: How can I fix the 'Missing Cross-Origin Resource Sharing (CORS) Response Header' webfont issue?
For the copy/paste-r types (and to give some props) I pieced this together from all the contributions and added it to the top of the .htaccess file of the site root:
<IfModule mod_headers.c>
<IfModule mod_rewrite.c>
SetEnvIf Origin "http(s)?://(.+\.)?(othersite\.com|mywebsite\.com)(:\d{1,5})?$" CORS=$0
Header set Access-Control-Allow-Origin "%{CORS}e" env=CORS
Header merge Vary "Origin"
</IfModule>
</IfModule>
Super Secure, Super Elegant. Love it: You don't have to open up your servers bandwidth to resource thieves / hot-link-er types.
Props to:@Noyo @DaveRandom @pratap-koritala
(I tried to leave this as a comment to the accepted answer, but I can't do that yet)
The function returns a static 2D array
const int N = 6;
int (*(MakeGridOfCounts)())[N] {
static int cGrid[N][N] = {{0, }, {0, }, {0, }, {0, }, {0, }, {0, }};
return cGrid;
}
int main() {
int (*arr)[N];
arr = MakeGridOfCounts();
}
You need to make the array static since it will be having a block scope, when the function call ends, the array will be created and destroyed. Static scope variables last till the end of program.
private void Form1_KeyPress(object sender, KeyPressEventArgs e)
{
if(e.KeyChar == 'm')
this.WindowState = FormWindowState.Minimized;
}
By default, IUSR account is used for anonymous user.
All you need to do is:
IIS -> Authentication --> Set Anonymous Authentication to Application Pool Identity.
Problem solved :)
Here how can use threads with a progressBar , its just for understing how the threads works, in the form there are three progressBar and 4 button:
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
Thread t, t2, t3;
private void Form1_Load(object sender, EventArgs e)
{
CheckForIllegalCrossThreadCalls = false;
t = new Thread(birinicBar); //evry thread workes with a new progressBar
t2 = new Thread(ikinciBar);
t3 = new Thread(ucuncuBar);
}
public void birinicBar() //to make progressBar work
{
for (int i = 0; i < 100; i++) {
progressBar1.Value++;
Thread.Sleep(100); // this progressBar gonna work faster
}
}
public void ikinciBar()
{
for (int i = 0; i < 100; i++)
{
progressBar2.Value++;
Thread.Sleep(200);
}
}
public void ucuncuBar()
{
for (int i = 0; i < 100; i++)
{
progressBar3.Value++;
Thread.Sleep(300);
}
}
private void button1_Click(object sender, EventArgs e) //that button to start the threads
{
t.Start();
t2.Start(); t3.Start();
}
private void button4_Click(object sender, EventArgs e)//that button to stup the threads with the progressBar
{
t.Suspend();
t2.Suspend();
t3.Suspend();
}
private void button2_Click(object sender, EventArgs e)// that is for contuniue after stuping
{
t.Resume();
t2.Resume();
t3.Resume();
}
private void button3_Click(object sender, EventArgs e) // finally with that button you can remove all of the threads
{
t.Abort();
t2.Abort();
t3.Abort();
}
}
I use Windows Server 2012 for hosting for a long time and it just stop working after a more than years without any problem. My solution was to add public IP address of the server to list of relays and enabled Windows Integrated Authentication.
I just made two changes and I don't which help.
Go to IIS 6 Manager
Select properties of SMTP server
On tab Access, select Relays
Add your public IP address
Close the dialog and on the same tab click to Authentication button.
Add Integrated Windows Authentication
Maybe some step is not needed, but it works.
You could do this:
(Note! This is CSS3 and the browser support = good!! )
p {
text-overflow: ellipsis; /* will make [...] at the end */
width: 370px; /* change to your preferences */
white-space: nowrap; /* paragraph to one line */
overflow:hidden; /* older browsers */
}
Perhaps you'll have to check the nodetype too:
if(element.nodeType == 1){//element of type html-object/tag
if(element.tagName=="a"){
//this is an a-element
}
if(element.tagName=="div"){
//this is a div-element
}
}
Edit: Corrected the nodeType-value
Here's how I do it:
Model:
[ReadOnly(true)]
public string Email { get { return DbUser.Email; } }
View:
@Html.TheEditorFor(x => x.Email)
Extension:
namespace System.Web.Mvc
{
public static class CustomExtensions
{
public static MvcHtmlString TheEditorFor<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, object htmlAttributes = null)
{
return iEREditorForInternal(htmlHelper, expression, HtmlHelper.AnonymousObjectToHtmlAttributes(htmlAttributes));
}
private static MvcHtmlString iEREditorForInternal<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, IDictionary<string, object> htmlAttributes)
{
if (htmlAttributes == null) htmlAttributes = new Dictionary<string, object>();
TagBuilder builder = new TagBuilder("div");
builder.MergeAttributes(htmlAttributes);
var metadata = ModelMetadata.FromLambdaExpression(expression, htmlHelper.ViewData);
string labelHtml = labelHtml = Html.LabelExtensions.LabelFor(htmlHelper, expression).ToHtmlString();
if (metadata.IsRequired)
labelHtml = Html.LabelExtensions.LabelFor(htmlHelper, expression, new { @class = "required" }).ToHtmlString();
string editorHtml = Html.EditorExtensions.EditorFor(htmlHelper, expression).ToHtmlString();
if (metadata.IsReadOnly)
editorHtml = Html.DisplayExtensions.DisplayFor(htmlHelper, expression).ToHtmlString();
string validationHtml = Html.ValidationExtensions.ValidationMessageFor(htmlHelper, expression).ToHtmlString();
builder.InnerHtml = labelHtml + editorHtml + validationHtml;
return new MvcHtmlString(builder.ToString(TagRenderMode.Normal));
}
}
}
Of course my editor is doing a bunch more stuff, like adding a label, adding a required class to that label as necessary, adding a DisplayFor
if the property is ReadOnly
EditorFor
if its not, adding a ValidateMessageFor
and finally wrapping all of that in a Div
that can have Html Attributes
assigned to it... my Views
are super clean.
You have to escape each \
to be \\
:
var ttt = "aa ///\\\\\\";
Updated: I think this question is not about the escape character in string at all. The asker doesn't seem to explain the problem correctly.
because you had to show a message to user that user can't give a name which has (\) character.
I think the scenario is like:
var user_input_name = document.getElementById('the_name').value;
Then the asker wants to check if user_input_name
contains any [\
]. If so, then alert the user.
If user enters [aa ///\
] in HTML input box, then if you alert(user_input_name)
, you will see [aaa ///\
]. You don't need to escape, i.e. replace [\
] to be [\\
] in JavaScript code. When you do escaping, that is because you are trying to make of a string which contain special characters in JavaScript source code. If you don't do it, it won't be parsed correct. Since you already get a string, you don't need to pass it into an escaping function. If you do so, I am guessing you are generating another JavaScript code from a JavaScript code, but it's not the case here.
I am guessing asker wants to simulate the input, so we can understand the problem. Unfortunately, asker doesn't understand JavaScript well. Therefore, a syntax error code being supplied to us:
var ttt = "aa ///\";
Hence, we assume the asker having problem with escaping.
If you want to simulate, you code must be valid at first place.
var ttt = "aa ///\\"; // <- This is correct
// var ttt = "aa ///\"; // <- This is not.
alert(ttt); // You will see [aa ///\] in dialog, which is what you expect, right?
Now, you only need to do is
var user_input_name = document.getElementById('the_name').value;
if (user_input_name.indexOf("\\") >= 0) { // There is a [\] in the string
alert("\\ is not allowed to be used!"); // User reads [\ is not allowed to be used]
do_something_else();
}
Edit: I used []
to quote text to be shown, so it would be less confused than using ""
.
Not possible through mockito. From their wiki
Why Mockito doesn't mock private methods?
Firstly, we are not dogmatic about mocking private methods. We just don't care about private methods because from the standpoint of testing private methods don't exist. Here are a couple of reasons Mockito doesn't mock private methods:
It requires hacking of classloaders that is never bullet proof and it changes the api (you must use custom test runner, annotate the class, etc.).
It is very easy to work around - just change the visibility of method from private to package-protected (or protected).
It requires me to spend time implementing & maintaining it. And it does not make sense given point #2 and a fact that it is already implemented in different tool (powermock).
Finally... Mocking private methods is a hint that there is something wrong with OO understanding. In OO you want objects (or roles) to collaborate, not methods. Forget about pascal & procedural code. Think in objects.
See help(Sys.sleep)
.
For example, from ?Sys.sleep
testit <- function(x)
{
p1 <- proc.time()
Sys.sleep(x)
proc.time() - p1 # The cpu usage should be negligible
}
testit(3.7)
Yielding
> testit(3.7)
user system elapsed
0.000 0.000 3.704
jQuerify is the perfect extension to embed jQuery into Chrome Console and is as simple as you can imagine. This extension also indicates if jQuery has been already embedded into a page.
This extension is used to embed jQuery into any page you want. It allows to use jQuery in the console shell (You can invoke Chrome console by Ctrl + Shift + j".).
To embed jQuery into the selected tab click on extension button.
For Windows 10
Look for the jupyter_notebook_config.py in C:\Users\your_user_name\.jupyter or look it up with cortana.
If you don't have it, then go to the cmd line and type:
jupyter notebook --generate-config
Open the jupyter_notebook_config.py and do a ctrl-f
search for:
c.NotebookApp.notebook_dir
Uncomment it by removing the #.
Change it to:
c.NotebookApp.notebook_dir = 'C:/your/new/path'
Note: You can put a u
in front of the first '
, change \\\\
to /
, or change the '
to "
. I don't think it matters.
Go to your Jupyter Notebook link and right click it. Select properties. Go to the Shortcut menu and click Target. Look for %USERPROFILE%. Delete it. Save. Restart Jupyter.
To me, the correct way of doing it would be the ones listed. Either ajax
or ajaxSetup
. If you really want to use get
and not use ajaxSetup
then you could create your own parameter and give it the value of the the current date/time.
I would however question your motives in not using one of the other methods.
Use the keys()
iterator to iterate over all the properties, and call get()
for each.
Iterator<String> iter = json.keys();
while (iter.hasNext()) {
String key = iter.next();
try {
Object value = json.get(key);
} catch (JSONException e) {
// Something went wrong!
}
}
I'd recommend event.key
currently. MDN docs: https://developer.mozilla.org/en-US/docs/Web/API/KeyboardEvent/key
event.KeyCode
and event.which
both have nasty deprecated warnings at the top of their MDN pages:
https://developer.mozilla.org/en-US/docs/Web/API/KeyboardEvent/keyCode
https://developer.mozilla.org/en-US/docs/Web/API/KeyboardEvent/which
For alphanumeric keys, event.key
appears to be implemented identically across all browsers. For control keys (tab, enter, escape, etc), event.key
has the same value across Chrome/FF/Safari/Opera but a different value in IE10/11/Edge (IEs apparently use an older version of the spec but match each other as of Jan 14 2018).
For alphanumeric keys a check would look something like:
event.key === 'a'
For control characters you'd need to do something like:
event.key === 'Esc' || event.key === 'Escape'
I used the example here to test on multiple browsers (I had to open in codepen and edit to get it to work with IE10): https://developer.mozilla.org/en-US/docs/Web/API/KeyboardEvent/code
event.code
is mentioned in a different answer as a possibility, but IE10/11/Edge don't implement it, so it's out if you want IE support.
What about -mmin
?
find /var/www/html/audio -daystart -maxdepth 1 -mmin +59 -type f -name "*.mp3" \
-exec rm -f {} \;
From man find:
-mmin n File's data was last modified n minutes ago.
Also, make sure to test this first!
... -exec echo rm -f '{}' \; ^^^^ Add the 'echo' so you just see the commands that are going to get run instead of actual trying them first.
You can also just right click on the page in the browser and select "Inspect Element" to bring up the developer tools.
I needed the bar labels too, note that my y-axis is having a zoomed view using limits on y axis. The default calculations for putting the labels on top of the bar still works using height (use_global_coordinate=False in the example). But I wanted to show that the labels can be put in the bottom of the graph too in zoomed view using global coordinates in matplotlib 3.0.2. Hope it help someone.
def autolabel(rects,data):
"""
Attach a text label above each bar displaying its height
"""
c = 0
initial = 0.091
offset = 0.205
use_global_coordinate = True
if use_global_coordinate:
for i in data:
ax.text(initial+offset*c, 0.05, str(i), horizontalalignment='center',
verticalalignment='center', transform=ax.transAxes,fontsize=8)
c=c+1
else:
for rect,i in zip(rects,data):
height = rect.get_height()
ax.text(rect.get_x() + rect.get_width()/2., height,str(i),ha='center', va='bottom')
The d3
print below is the one you are looking for (which is the combination of dumps and loads) :)
Having:
import json
d = """{"Aa": 1, "BB": "blabla", "cc": "False"}"""
d1 = json.loads(d) # Produces a dictionary out of the given string
d2 = json.dumps(d) # Produces a string out of a given dict or string
d3 = json.dumps(json.loads(d)) # 'dumps' gets the dict from 'loads' this time
print "d1: " + str(d1)
print "d2: " + d2
print "d3: " + d3
Prints:
d1: {u'Aa': 1, u'cc': u'False', u'BB': u'blabla'}
d2: "{\"Aa\": 1, \"BB\": \"blabla\", \"cc\": \"False\"}"
d3: {"Aa": 1, "cc": "False", "BB": "blabla"}
I found this script somewhere. I don't remember where, but it works for me:
#!/bin/ksh
line='---------------------------------------------'
pids=$(/usr/bin/ps -ef | sed 1d | awk '{print $2}')
if [ $# -eq 0 ]; then
read ans?"Enter port you would like to know pid for: "
else
ans=$1
fi
for f in $pids
do
/usr/proc/bin/pfiles $f 2>/dev/null | /usr/xpg4/bin/grep -q "port: $ans"
if [ $? -eq 0 ]; then
echo $line
echo "Port: $ans is being used by PID:\c"
/usr/bin/ps -ef -o pid -o args | egrep -v "grep|pfiles" | grep $f
fi
done
exit 0
Edit: Here is the original source: [Solaris] Which process is bound to a given port ?
It's simple math. Given a number X and a rounding factor N, the formula would be:
round(X / N)*N
Then add openssl\bin to the path system variables:
My computer -> properties -> Advanced configurations -> Advanced -> System variables -> under system variables find path, and add this to its endings: ;yourFullOpenSSLDir\bin
Now open a command line on your jdk\bin folder C:\Program Files\Java\jdk1.8.0_40\bin (on windows hold shift and right click -> open command line here) and use:
keytool -exportcert -alias keystorealias -keystore C:\yourkeystore\folder\keystore.jks | openssl sha1 -binary | openssl base64
And copy the 28 lenght number it generates after giving the password.
current working directory variable ie full path /home/dev/other
dir=$PWD
print the full path
echo $dir
Try:
mmatrix = np.zeros((nrows, ncols))
Since the shape parameter has to be an int or sequence of ints
http://docs.scipy.org/doc/numpy/reference/generated/numpy.zeros.html
Otherwise you are passing ncols
to np.zeros
as the dtype.
It's good practice to use a context manager or call close()
in case of exceptions during the file saving process. Could happen if your storage backend is down, etc.
Any overwrite behavior should be configured in your storage backend. For example S3Boto3Storage has a setting AWS_S3_FILE_OVERWRITE
. If you're using FileSystemStorage
you can write a custom mixin.
You might also want to call the model's save method instead of the FileField's save method if you want any custom side-effects to happen, like last-updated timestamps. If that's the case, you can also set the name attribute of the file to the name of the file - which is relative to MEDIA_ROOT
. It defaults to the full path of the file which can cause problems if you don't set it - see File.__init__() and File.name.
Here's an example where self
is the model instance where my_file
is the FileField / ImageFile, calling save()
on the whole model instance instead of just FileField:
import os
from django.core.files import File
with open(filepath, 'rb') as fi:
self.my_file = File(fi, name=os.path.basename(fi.name))
self.save()
If you don't want to have to add the stop propagation to all links this works as well. A bit more scalable.
$scope.hideOverlay( $event ){
// only hide the overlay if we click on the actual div
if( $event.target.className.indexOf('overlay') )
// hide overlay logic
}
select datediff(day,
dateadd(day, 0, dateadd(month, ((2013 - 1900) * 12) + 3 - 1, 0)),
dateadd(day, 0, dateadd(month, ((2013 - 1900) * 12) + 3, 0))
)
Nice Simple and does not require creating any functions Work Fine
$where = "name='Joe' AND status='boss' OR status='active'";
$this->db->where($where);
class Child(SomeBaseClass):
def __init__(self):
SomeBaseClass.__init__(self)
This is fairly easy to understand.
class Child(SomeBaseClass):
def __init__(self):
super(Child, self).__init__()
Ok, what happens now if you use super(Child,self)
?
When a Child instance is created, its MRO(Method Resolution Order) is in the order of (Child, SomeBaseClass, object) based on the inheritance. (assume SomeBaseClass doesn't have other parents except for the default object)
By passing Child, self
, super
searches in the MRO of the self
instance, and return the proxy object next of Child, in this case it's SomeBaseClass, this object then invokes the __init__
method of SomeBaseClass. In other word, if it's super(SomeBaseClass,self)
, the proxy object that super
returns would be object
For multi inheritance, the MRO could contain many classes, so basically super
lets you decide where you want to start searching in the MRO.
Find the below code in xampp/phpmyadmin/config.inc.php
$cfg['Servers'][$i]['controluser'] = 'user_name/root';
$cfg['Servers'][$i]['controlpass'] = 'passwaord';
$cfg['Servers'][$i]['auth_type'] = 'config';
$cfg['Servers'][$i]['user'] = 'user_name/root';
$cfg['Servers'][$i]['password'] = 'password';
Replace each statement above with the corresponding entry below:
$cfg['Servers'][$i]['controluser'] = 'root';
$cfg['Servers'][$i]['controlpass'] = 'xxxx';
$cfg['Servers'][$i]['auth_type'] = 'config';
$cfg['Servers'][$i]['user'] = 'root';
$cfg['Servers'][$i]['password'] = 'xxxx';
Doing this caused localhost/phpmyadmin in the browser and the MySQL command prompt to work properly.
Datetime formatting is performed by the org.joda.time.format.DateTimeFormatter class
. Three classes provide factory methods to create formatters, and this is one. The others are ISODateTimeFormat
and DateTimeFormatterBuilder
.
DateTimeFormatter format = DateTimeFormat.forPattern("yyyy-MMM-dd");
LocalDate lDate = new LocalDate().parse("2005-nov-12",format);
final org.joda.time.LocalDate class
is an immutable datetime class representing a date without a time zone. LocalDate
is thread-safe and immutable, provided that the Chronology is as well. All standard Chronology classes supplied are thread-safe and immutable.
I had the same question as the original poster, did this as a solution. Not sure how efficient this is ....
interval = 5000; // initial condition
var run = setInterval(request , interval); // start setInterval as "run"
function request() {
console.log(interval); // firebug or chrome log
clearInterval(run); // stop the setInterval()
// dynamically change the run interval
if(interval>200 ){
interval = interval*.8;
}else{
interval = interval*1.2;
}
run = setInterval(request, interval); // start the setInterval()
}
You can use code as below when
using Image as Loading
<asp:UpdateProgress id="updateProgress" runat="server">
<ProgressTemplate>
<div style="position: fixed; text-align: center; height: 100%; width: 100%; top: 0; right: 0; left: 0; z-index: 9999999; background-color: #000000; opacity: 0.7;">
<asp:Image ID="imgUpdateProgress" runat="server" ImageUrl="~/images/ajax-loader.gif" AlternateText="Loading ..." ToolTip="Loading ..." style="padding: 10px;position:fixed;top:45%;left:50%;" />
</div>
</ProgressTemplate>
</asp:UpdateProgress>
using Text as Loading
<asp:UpdateProgress id="updateProgress" runat="server">
<ProgressTemplate>
<div style="position: fixed; text-align: center; height: 100%; width: 100%; top: 0; right: 0; left: 0; z-index: 9999999; background-color: #000000; opacity: 0.7;">
<span style="border-width: 0px; position: fixed; padding: 50px; background-color: #FFFFFF; font-size: 36px; left: 40%; top: 40%;">Loading ...</span>
</div>
</ProgressTemplate>
</asp:UpdateProgress>
Why not use iterative algorithm?
int fib(int n)
{
int a = 1, b = 1;
for (int i = 3; i <= n; i++) {
int c = a + b;
a = b;
b = c;
}
return b;
}
The best way that I found to handle this issue is (replace 65px with your fixed element height):
div:target {
padding-top: 65px;
margin-top: -65px;
}
If you do not like to use the target selector you can also do it in this way:
.my-target {
padding-top: 65px;
margin-top: -65px;
}
Note: this example will not work if the target element have a backgound color that differant from his parent. for example:
<div style="background-color:red;height:100px;"></div>
<div class="my-target" style="background-color:green;height:100px;"></div>
in this case the green color of my-target element will overwrite his parent red element in 65px. I did not find any pure CSS solution to handle this issue but if you do not have another background color this solution is the best.
If you also want to match newlines, then you might want to use "^[\s\S]{1,35}$"
(depending on the regex engine). Otherwise, as others have said, you should used "^.{1,35}$"
Use Page Directive to import a Class in JSP page. Page Directive Uses 11 Different types of Attributes , One of them is "import". Page Directive with import Attribute Allows you to Mention more than one package at the same place separated by Commas(,). Alternatively you can have multiple instances of page element each one with Different package .
For Example:
<%@ page import = "java.io.*" %>
<%@ page import = "java.io.*", "java.util.*"%>
Note : the import attribute should be placed before the element that calls the importd class .
While running the tensorboard give one more option --host=ip of your system and then you can access it from other system using http://ip of your host system:6006
Tips from 2020:
From Flask 1.0, it defaults to enable multiple threads (source), you don't need to do anything, just upgrade it with:
$ pip install -U flask
If you are using flask run
instead of app.run()
with older versions, you can control the threaded behavior with a command option (--with-threads/--without-threads
):
$ flask run --with-threads
It's same as app.run(threaded=True)
Here I provided you a link where explain what is C# Language and the .NET Framework Platform Architecture. Remember that C# is a general-purpose, object-oriented programming language, and it runs on the .NET Framework.
.NET Framework includes a large class library named Framework Class Library (FCL) and provides user interface, data access, database connectivity, cryptography, web application development, numeric algorithms, and network communications.
.NET Framework was developed by Microsoft that runs primarily on Microsoft Windows.
Introduction to the C# Language and the .NET Framework from Microsoft Docs
Try out cat
and sprintf
in your for loop.
eg.
cat(sprintf("\"%f\" \"%f\"\n", df$r, df$interest))
See here
You really want to do this
flog.write("\nCompany Name: "+ pCompanyName.encode('utf-8'))
This is the "encode late" strategy described in this unicode presentation (slides 32 through 35).
I tried many things that didn't work. The only thing that worked for me was:
window.print();
window.onafterprint = function () {
window.close();
}
tested on chrome.
To answer your first question, numpy.correlate(a, v, mode)
is performing the convolution of a
with the reverse of v
and giving the results clipped by the specified mode. The definition of convolution, C(t)=? -8 < i < 8 aivt+i where -8 < t < 8, allows for results from -8 to 8, but you obviously can't store an infinitely long array. So it has to be clipped, and that is where the mode comes in. There are 3 different modes: full, same, & valid:
t
where both a
and v
have some overlap. a
or v
). a
and v
completely overlap each other. The documentation for numpy.convolve
gives more detail on the modes.For your second question, I think numpy.correlate
is giving you the autocorrelation, it is just giving you a little more as well. The autocorrelation is used to find how similar a signal, or function, is to itself at a certain time difference. At a time difference of 0, the auto-correlation should be the highest because the signal is identical to itself, so you expected that the first element in the autocorrelation result array would be the greatest. However, the correlation is not starting at a time difference of 0. It starts at a negative time difference, closes to 0, and then goes positive. That is, you were expecting:
autocorrelation(a) = ? -8 < i < 8 aivt+i where 0 <= t < 8
But what you got was:
autocorrelation(a) = ? -8 < i < 8 aivt+i where -8 < t < 8
What you need to do is take the last half of your correlation result, and that should be the autocorrelation you are looking for. A simple python function to do that would be:
def autocorr(x):
result = numpy.correlate(x, x, mode='full')
return result[result.size/2:]
You will, of course, need error checking to make sure that x
is actually a 1-d array. Also, this explanation probably isn't the most mathematically rigorous. I've been throwing around infinities because the definition of convolution uses them, but that doesn't necessarily apply for autocorrelation. So, the theoretical portion of this explanation may be slightly wonky, but hopefully the practical results are helpful. These pages on autocorrelation are pretty helpful, and can give you a much better theoretical background if you don't mind wading through the notation and heavy concepts.
jQuery('#from_date').on('change', function(){
var date = $(this).val();
jQuery('#to_date').datetimepicker({minDate: date});
});
I have written the following code in my last assignment, it may help you:
// A method that converts the nano-seconds to Seconds-Minutes-Hours form
private static String formatTime(long nanoSeconds)
{
int hours, minutes, remainder, totalSecondsNoFraction;
double totalSeconds, seconds;
// Calculating hours, minutes and seconds
totalSeconds = (double) nanoSeconds / 1000000000.0;
String s = Double.toString(totalSeconds);
String [] arr = s.split("\\.");
totalSecondsNoFraction = Integer.parseInt(arr[0]);
hours = totalSecondsNoFraction / 3600;
remainder = totalSecondsNoFraction % 3600;
minutes = remainder / 60;
seconds = remainder % 60;
if(arr[1].contains("E")) seconds = Double.parseDouble("." + arr[1]);
else seconds += Double.parseDouble("." + arr[1]);
// Formatting the string that conatins hours, minutes and seconds
StringBuilder result = new StringBuilder(".");
String sep = "", nextSep = " and ";
if(seconds > 0)
{
result.insert(0, " seconds").insert(0, seconds);
sep = nextSep;
nextSep = ", ";
}
if(minutes > 0)
{
if(minutes > 1) result.insert(0, sep).insert(0, " minutes").insert(0, minutes);
else result.insert(0, sep).insert(0, " minute").insert(0, minutes);
sep = nextSep;
nextSep = ", ";
}
if(hours > 0)
{
if(hours > 1) result.insert(0, sep).insert(0, " hours").insert(0, hours);
else result.insert(0, sep).insert(0, " hour").insert(0, hours);
}
return result.toString();
}
Just convert nano-seconds to milli-seconds.
Older versions of git require you first define an ignore pattern and immediately (on the next line) define the exclusion. [tested on version 1.9.3 (Apple Git-50)]
/config.php
!/*/config.php
Later versions only require the following [tested on version 2.2.1]
/config.php
hi guys after one day searching on web finally i solve problem with below source code hope to help you
public UploadResult UploadFile(string fileAddress)
{
HttpClient client = new HttpClient();
MultipartFormDataContent form = new MultipartFormDataContent();
HttpContent content = new StringContent("fileToUpload");
form.Add(content, "fileToUpload");
var stream = new FileStream(fileAddress, FileMode.Open);
content = new StreamContent(stream);
var fileName =
content.Headers.ContentDisposition = new ContentDispositionHeaderValue("form-data")
{
Name = "name",
FileName = Path.GetFileName(fileAddress),
};
form.Add(content);
HttpResponseMessage response = null;
var url = new Uri("http://192.168.10.236:2000/api/Upload2");
response = (client.PostAsync(url, form)).Result;
}
Since Angular 1.5 it's possible to use Components. Components are the-way-to-go and solves this problem easy.
<myComponent data-ng-model="$ctrl.result"></myComponent>
app.component("myComponent", {
templateUrl: "yourTemplate.html",
controller: YourController,
bindings: {
ngModel: "="
}
});
Inside YourController all you need to do is:
this.ngModel = "x"; //$scope.$apply("$ctrl.ngModel"); if needed
private String message;
private ScreenManager s;
//Here is an example of code to add the keyListener() as suggested; modify
public void init(){
Window w = s.getFullScreenWindow();
w.addKeyListener(this);
public void keyPressed(KeyEvent e){
int keyCode = e.getKeyCode();
if(keyCode == KeyEvent.VK_F5)
message = "Pressed: " + KeyEvent.getKeyText(keyCode);
}
One option would be to store the hash (SHA1, MD5) of the password instead of the clear-text password, and whenever you want to see if the password is good, just compare it to that hash.
If you need secure storage (for example for a password that you will use to connect to a service), then the problem is more complicated.
If it is just for authentication, then it would be enough to use the hash.
this fails:
DECLARE @vPortalUID NVARCHAR(32)
SET @vPortalUID='2A66057D-F4E5-4E2B-B2F1-38C51A96D385'
DECLARE @nPortalUID AS UNIQUEIDENTIFIER
SET @nPortalUID = CAST(@vPortalUID AS uniqueidentifier)
PRINT @nPortalUID
this works
DECLARE @vPortalUID NVARCHAR(36)
SET @vPortalUID='2A66057D-F4E5-4E2B-B2F1-38C51A96D385'
DECLARE @nPortalUID AS UNIQUEIDENTIFIER
SET @nPortalUID = CAST(@vPortalUID AS UNIQUEIDENTIFIER)
PRINT @nPortalUID
the difference is NVARCHAR(36)
, your input parameter is too small!
I use code below:
var fileSplit = filename.split('.');
var fileExt = '';
if (fileSplit.length > 1) {
fileExt = fileSplit[fileSplit.length - 1];
}
return fileExt;
When you use the input function it automatically turns it into a string. You need to go:
vote = int(input('Enter the name of the player you wish to vote for'))
which turns the input into a int type value
Good news everyone some people! Newer browsers will trigger a window resize event when the zoom is changed.
After all the Jquery script tag's add
<script>jQuery.noConflict();</script>
to avoid the conflict between Prototype and Jquery.
Atom is open source (has been for a few hours by now), whereas Sublime Text is not.
Instead of directly messing with innerHTML
it might be better to create a fragment and then insert that:
function create(htmlStr) {
var frag = document.createDocumentFragment(),
temp = document.createElement('div');
temp.innerHTML = htmlStr;
while (temp.firstChild) {
frag.appendChild(temp.firstChild);
}
return frag;
}
var fragment = create('<div>Hello!</div><p>...</p>');
// You can use native DOM methods to insert the fragment:
document.body.insertBefore(fragment, document.body.childNodes[0]);
Benefits:
Even though innerHTML
is used within the function, it's all happening outside of the DOM so it's much faster than you'd think...
Listen the change
event.
document.querySelector("input")
.addEventListener('change', (e) => {
console.log(e.currentTarget.value);
});
If you've got VS2010
installed, you ought to find a .NET 4.0 gacutil at
C:\Program Files\Microsoft SDKs\Windows\v7.0A\bin\NETFX 4.0 Tools
The 7.0A Windows SDK
should have been installed alongside VS2010 - 6.0A
will have been installed with VS2008
, and hence won't have .NET 4.0 support.
Found this in another thread that helped me: Use xp_cmdshell and sqlcmd Is it possible to execute a text file from SQL query? - by Gulzar Nazim
EXEC xp_cmdshell 'sqlcmd -S ' + @DBServerName + ' -d ' + @DBName + ' -i ' + @FilePathName
My DataGridView is also bound to a DataSource and myDataGridView.Columns.Clear()
worked fine but myDataGridView.Rows.Clear()
did NOT. Just an FYI for those who have tried .Rows
.
$("#chkdwn2").change(function() {
if (this.checked) $("#dropdown").prop("disabled",'disabled');
})
ES6 version:
["Foo", "bar"].sort((a, b) => a.localeCompare(b, 'en', { sensitivity: 'base' }))
So I assume your permissions table has a foreign key reference to admin_accounts table. If so because of referential integrity you will only be able to add permissions for account ids exsiting in the admin accounts table. Which also means that you wont be able to enter a user_account_id [assuming there are no duplicates!]
Besides the redundant )
this expression will always be true
because currentStatus
will always match one of these two conditions:
currentStatus !== 'open' || currentStatus !== 'reopen'
perhaps you mean one of
!(currentStatus === 'open' || currentStatus === 'reopen')
(currentStatus !== 'open' && currentStatus !== 'reopen')
SELECT COUNT(*) FROM bla WHERE Position = 'Manager'
Robert MacLean's answer did not work for me.
This however does work for me:
$("#div").dialog({
open: function() { $(".ui-dialog-titlebar-close").hide(); }
});
To fix the issue:
protected void Application_PostAuthorizeRequest()
{
System.Web.HttpContext.Current.SetSessionStateBehavior(System.Web.SessionState.SessionStateBehavior.Required);
}
in Global.asax.cs
The accepted answer is out of date. I found a better answer: Use Import Data-tier Application
More detailed information please see this article: Restoring Azure SQL Database to a Local Server
The instanceof operator compares an object to a specified type. You can use it to test if an object is an instance of a class, an instance of a subclass, or an instance of a class that implements a particular interface.
http://download.oracle.com/javase/tutorial/java/nutsandbolts/op2.html
Other possibilities for .tpl
: HTML::SimpleTemplate, example:
Hello $name
, and Template Toolkit, example:
Hello [% world %]!
If you want to remove an item, the following will be a bit more efficient.
std::vector<int> v;
auto it = std::find(v.begin(), v.end(), 5);
if(it != v.end())
v.erase(it);
or you may avoid overhead of moving the items if the order does not matter to you:
std::vector<int> v;
auto it = std::find(v.begin(), v.end(), 5);
if (it != v.end()) {
using std::swap;
// swap the one to be removed with the last element
// and remove the item at the end of the container
// to prevent moving all items after '5' by one
swap(*it, v.back());
v.pop_back();
}
Used the above code in MVC5 project and it works completely fine with the validation error. Just try this code:
[Required]
[Display(Name = "Email")]
[EmailAddress]
[RegularExpression(@"^([A-Za-z0-9][^'!&\\#*$%^?<>()+=:;`~\[\]{}|/,?€@ ][a-zA-z0-
9-._][^!&\\#*$%^?<>()+=:;`~\[\]{}|/,?€@ ]*\@[a-zA-Z0-9][^!&@\\#*$%^?<>
()+=':;~`.\[\]{}|/,?€ ]*\.[a-zA-Z]{2,6})$", ErrorMessage = "Please enter a
valid Email")]
public string ReceiverMail { get; set; }
<script type="text/javascript">
$(function() {
$("[name=toggler]").click(function(){
$('.toHide').hide();
$("#blk-"+$(this).val()).show('slow');
});
});
</script>
</head>
<body>
<label><input id="rdb1" type="radio" name="toggler" value="1" />Book</label>
<label><input id="rdb2" type="radio" name="toggler" value="2" />Non-Book</label>
<div id="blk-1" class="toHide" style="display:none">
<form action="success1.html">
Name1:<input type="text" name="name">
<input type="submit" name="submit">
</form>
</div>
<div id="blk-2" class="toHide" style="display:none">
<form action="success1.html">
Name2:<input type="text" name="name">
<input type="submit" name="submit">
</form>
</div>
This is because of typo error getElementByID. Change it to getElementById
If you are comparing between dates, extract the full date for comparison. If you are comparing the years and months only, use
SELECT YEAR(date) AS 'year', MONTH(date) AS 'month'
FROM Table Where Condition = 'Condition';
You could use Enumerable#select:
clients.select{|key, hash| hash["client_id"] == "2180" }
#=> [["orange", {"client_id"=>"2180"}]]
Note that the result will be an array of all the matching values, where each is an array of the key and value.
I had this issue, I run 64 bit Windows and had downloaded the 64 bit TOAD package. I finally arrived at the conclusion that it was because I unzipped the package in a windows share using cygwin command line unzip. Turned out TOAD wasn't liking the permissions on some files. When I unzipped using windows File Explorer everything worked as expected.
A rewrite of the answer by Sarfraz would be something like this, I think:
<script>
document.getElementById('change').onclick = changeColor;
function changeColor() {
document.body.style.color = "purple";
return false;
}
</script>
You'd either have to put this script at the bottom of your page, right before the closing body tag, or put the handler assignment in a function called onload - or if you're using jQuery there's the very elegant $(document).ready(function() { ... } );
Note that when you assign event handlers this way, it takes the functionality out of your HTML. Also note you set it equal to the function name -- no (). If you did onclick = myFunc();
the function would actually execute when the handler is being set.
And I'm curious -- you knew enough to script changing the background color, but not the text color? strange:)
So it turns out that the crux of the problem is that by default, Postgres starts in "autoCommit" mode, and also it needs/uses cursors to be able to "page" through data (ex: read the first 10K results, then the next, then the next), however cursors can only exist within a transaction. So the default is to read all rows, always, into RAM, and then allow your program to start processing "the first result row, then the second" after it has all arrived, for two reasons, it's not in a transaction (so cursors don't work), and also a fetch size hasn't been set.
So how the psql
command line tool achieves batched response (its FETCH_COUNT
setting) for queries, is to "wrap" its select queries within a short-term transaction (if a transaction isn't yet open), so that cursors can work. You can do something like that also with JDBC:
static void readLargeQueryInChunksJdbcWay(Connection conn, String originalQuery, int fetchCount, ConsumerWithException<ResultSet, SQLException> consumer) throws SQLException {
boolean originalAutoCommit = conn.getAutoCommit();
if (originalAutoCommit) {
conn.setAutoCommit(false); // start temp transaction
}
try (Statement statement = conn.createStatement()) {
statement.setFetchSize(fetchCount);
ResultSet rs = statement.executeQuery(originalQuery);
while (rs.next()) {
consumer.accept(rs); // or just do you work here
}
} finally {
if (originalAutoCommit) {
conn.setAutoCommit(true); // reset it, also ends (commits) temp transaction
}
}
}
@FunctionalInterface
public interface ConsumerWithException<T, E extends Exception> {
void accept(T t) throws E;
}
This gives the benefit of requiring less RAM, and, in my results, seemed to run overall faster, even if you don't need to save the RAM. Weird. It also gives the benefit that your processing of the first row "starts faster" (since it process it a page at a time).
And here's how to do it the "raw postgres cursor" way, along with full demo code, though in my experiments it seemed the JDBC way, above, was slightly faster for whatever reason.
Another option would be to have autoCommit
mode off, everywhere, though you still have to always manually specify a fetchSize for each new Statement (or you can set a default fetch size in the URL string).
You need to write it like sprintf(aa, "%9.7lf", a)
Check out http://en.wikipedia.org/wiki/Printf for some more details on format codes.
you can cancel the rebase with
git rebase --abort
and when you run the interactive rebase command again the 'squash; commit must be below the pick commit in the list
A pure JS that also works on IE (from @Manfred comment)
var evt = window.document.createEvent('UIEvents');
evt.initUIEvent('resize', true, false, window, 0);
window.dispatchEvent(evt);
Or for angular:
$timeout(function() {
var evt = $window.document.createEvent('UIEvents');
evt.initUIEvent('resize', true, false, $window, 0);
$window.dispatchEvent(evt);
});
You probably have one .OBJ or .LIB file that's targeted for x64 (that's the module machine type) while you're linking for x86 (that's the target machine type).
Use DUMPBIN /HEADERS on your .OBJ files and check for the machine entry in the FILE HEADER VALUES block.
As mentioned by Tom, background-color: rgba(229,229,229, 0.85)
can do the trick.
Place that on the style of the parent element and child wont be affected.
This is a slightly modified solution. The Process will be killed when it was idle for at least 1 second. Maybe you should add a timeof of X seconds and call the function from a separate thread.
private void SendToPrinter()
{
ProcessStartInfo info = new ProcessStartInfo();
info.Verb = "print";
info.FileName = @"c:\output.pdf";
info.CreateNoWindow = true;
info.WindowStyle = ProcessWindowStyle.Hidden;
Process p = new Process();
p.StartInfo = info;
p.Start();
long ticks = -1;
while (ticks != p.TotalProcessorTime.Ticks)
{
ticks = p.TotalProcessorTime.Ticks;
Thread.Sleep(1000);
}
if (false == p.CloseMainWindow())
p.Kill();
}
Just Follow This
UIImageView *imgview = [[UIImageView alloc]initWithFrame:CGRectMake(10, 10, 300, 400)];
[imgview setImage:[UIImage imageNamed:@"YourImageName"]];
[imgview setContentMode:UIViewContentModeScaleAspectFit];
[self.view addSubview:imgview];
It reads Hello World
(cat
), replaces all (g
) occurrences of %
by $
and (over)writes it to /etc/init.d/dropbox
as root.
I used following:
if str and not str.isspace():
print('not null and not empty nor whitespace')
else:
print('null or empty or whitespace')
I'm currently using this approach and it works like a charm. The trick is we get keyboard height from different methods on 21 above and below and then use it as the bottom padding of our root view in our activity. I assumed your layout does not need a top padding (goes below status bar) but in case you do, inform me to update my answer.
MainActivity.java
public class MainActivity extends AppCompatActivity {
@Override
protected void onCreate(final Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
setContentView(R.layout.activity_main);
RelativeLayout mainLayout = findViewById(R.id.main_layout);
if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.LOLLIPOP) {
ViewCompat.setOnApplyWindowInsetsListener(mainLayout , new OnApplyWindowInsetsListener() {
@Override
public WindowInsetsCompat onApplyWindowInsets(View v, WindowInsetsCompat insets) {
v.setPadding(0, 0, 0, insets.getSystemWindowInsetBottom());
return insets;
}
});
} else {
View decorView = getWindow().getDecorView();
final View contentView = mainLayout;
decorView.getViewTreeObserver().addOnGlobalLayoutListener(new ViewTreeObserver.OnGlobalLayoutListener() {
@Override
public void onGlobalLayout() {
Rect r = new Rect();
//r will be populated with the coordinates of your view that area still visible.
decorView.getWindowVisibleDisplayFrame(r);
//get screen height and calculate the difference with the useable area from the r
int height = decorView.getContext().getResources().getDisplayMetrics().heightPixels;
int diff = height - r.bottom;
//if it could be a keyboard add the padding to the view
if (diff != 0) {
// if the use-able screen height differs from the total screen height we assume that it shows a keyboard now
//check if the padding is 0 (if yes set the padding for the keyboard)
if (contentView.getPaddingBottom() != diff) {
//set the padding of the contentView for the keyboard
contentView.setPadding(0, 0, 0, diff);
}
} else {
//check if the padding is != 0 (if yes reset the padding)
if (contentView.getPaddingBottom() != 0) {
//reset the padding of the contentView
contentView.setPadding(0, 0, 0, 0);
}
}
}
});
}
}
...
}
Don't forget to address your root view with an id:
activity_main.xml
<RelativeLayout
xmlns:android="http://schemas.android.com/apk/res/android"
android:id="@+id/main_layout"
android:layout_width="match_parent"
android:layout_height="match_parent">
Hope it helps someone.
If you're concerned about server performance then look at capping the number of running sox processes. If the cap has been hit you can always cache the request and inform the user when it's finished in whichever way suits your application.
Alternatively, have the n worker scripts on other machines that pull requests from the db and call sox, and then push the resulting output file to where it needs to be.
MDN has the following to say about string.concat()
:
It is strongly recommended to use the string concatenation operators (+, +=) instead of this method for perfomance reasons
Also see the link by @Bergi.
The algorithm (HS256
) used to sign the JWT means that the secret is a symmetric key that is known by both the sender and the receiver. It is negotiated and distributed out of band. Hence, if you're the intended recipient of the token, the sender should have provided you with the secret out of band.
If you're the sender, you can use an arbitrary string of bytes as the secret, it can be generated or purposely chosen. You have to make sure that you provide the secret to the intended recipient out of band.
For the record, the 3 elements in the JWT are not base64-encoded but base64url-encoded, which is a variant of base64 encoding that results in a URL-safe value.
You can use this method if you use a MySQL database:
include('sql_connect.php');
$result = mysql_query("SELECT * FROM users WHERE `id`!='".$user_id."'");
while ($row = mysql_fetch_array($result))
{
if ($_GET['to'] == $row['id'])
{
$selected = 'selected="selected"';
}
else
{
$selected = '';
}
echo('<option value="'.$row['id'].' '.$selected.'">'.$row['username'].' ('.$row['fname'].' '.substr($row['lname'],0,1).'.)</option>');
}
mysql_close($con);
It will compare if the user in $_GET['to'] is the same as $row['id'] in table, if yes, the $selected will be created. This was for a private messaging system...
You dont need to give column names manually in xaml. Just set AutoGenerateColumns property to true and your list will be automatically binded to DataGrid. refer code. XAML Code:
<Grid>
<DataGrid x:Name="MyDatagrid" AutoGenerateColumns="True" Height="447" HorizontalAlignment="Left" Margin="20,85,0,0" VerticalAlignment="Top" Width="799" ItemsSource="{Binding Path=ListTest, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}" CanUserAddRows="False"> </Grid>
C#
Public Class Test
{
public string m_field1_Test{get;set;}
public string m_field2_Test { get; set; }
public Test()
{
m_field1_Test = "field1";
m_field2_Test = "field2";
}
public MainWindow()
{
listTest = new List<Test>();
for (int i = 0; i < 10; i++)
{
obj = new Test();
listTest.Add(obj);
}
this.MyDatagrid.ItemsSource = ListTest;
InitializeComponent();
}
If i understand that you want all rows in the year 2010, then:
select *
from mytable
where Columnx >= '2010-01-01 00:00:00'
and Columnx < '2011-01-01 00:00:00'
YOur best bet is to fix the datbase design and add the identioty column to the table. Why do you havea table without one in the first place? Especially one with duplicate records! Clearly the database itself needs redesigning.
And why do you have to have this in a view, why isn't your solution with the temp table a valid solution? Views are not usually a really good thing to do to a perfectly nice database.
For my lists, my rows have other things that can be clicked, like buttons, so doing a blanket blocksDescendants doesn't work. Instead I add a line in the button's xml:
android:focusable="false"
That keeps the buttons from blocking the clicks on the rows, but still lets the buttons take the clicks, too.