Programs & Examples On #Raster graphics

This one seems to be a better fit:

<#if userName?has_content>
... do something
</#if>

http://freemarker.sourceforge.net/docs/ref_builtins_expert.html

You forgot about the components section in your Vue initialization. So Vue actually doesn't know about your component.

Change it to:

var myTask = Vue.component('my-task', {
 template: '#task-template',
 data: function() {
  return this.tasks; //Notice: in components data should return an object. For example "return { someProp: 1 }"
 },
 props: ['task']
});

new Vue({
 el: '#app',
 data: {
  tasks: [{
    name: "task 1",
    completed: false
   },
   {
    name: "task 2",
    completed: false
   },
   {
    name: "task 3",
    completed: true
   }
  ]
 },
 components: {
  myTask: myTask
 },
 methods: {

 },
 computed: {

 },
 ready: function() {

 }

});

And here is jsBin, where all seems to works correctly: http://jsbin.com/lahawepube/edit?html,js,output

UPDATE

Sometimes you want your components to be globally visible to other components.

In this case you need to register your components in this way, before your Vue initialization or export (in case if you want to register component from the other component)

Vue.component('exampleComponent', require('./components/ExampleComponent.vue')); //component name should be in camel-case

After you can add your component inside your vue el:

<example-component></example-component>

Basically a modified syntax of function declaration/definitions:

a2dd.h

class A2DD
{
private:
  int gx;
  int gy;

public:
  A2DD(int x,int y);

  int getSum();
};

a2dd.cpp

A2DD::A2DD(int x,int y)
{
  gx = x;
  gy = y;
}

int A2DD::getSum()
{
  return gx + gy;
}

This may work as well.

SELECT * 
FROM myTable
WHERE CHARINDEX('mall', name) > 0
  OR CHARINDEX('mall', description) > 0

You can use npm view [module] version, npm info [module] version, npm show [module] version or npm v [module] version to check the version on an installed npm module.

Let's suppose my grunt module version is the 0.4.5:

npm view grunt version => 0.4.5
npm info grunt version => 0.4.5
npm show grunt version => 0.4.5
npm v grunt version    => 0.4.5

for (Object key : data.keySet()) {
    String lKey = (String) key;
    List<String> list = data.get(key);
}

To encrypt:

byte[] encrpt= text.getBytes("UTF-8");
String base64 = Base64.encodeToString(encrpt, Base64.DEFAULT);

To decrypt:

byte[] decrypt= Base64.decode(base64, Base64.DEFAULT);
String text = new String(decrypt, "UTF-8");

In case you want to use a WKWebView to load a .svg image that is coming from a URLRequest, you can simply achieve it like this:

Swift 4

if let request = URLRequest(url: urlString), let svgString = try? String(contentsOf: request) {
  wkWebView.loadHTMLString(svgString, baseURL: request)
}

It's much simpler than the other ways of doing it, and you can also persist your .svg string somewhere to load it later, even offline if you need to.

All “insensitive”s are boldened for readability.

Domain names are case insensitive according to RFC 4343. The rest of URL is sent to the server via the GET method. This may be case sensitive or not.

Take this page for example, stackoverflow.com receives GET string /questions/7996919/should-url-be-case-sensitive, sending a HTML document to your browser. Stackoverflow.com is case insensitive because it produces the same result for /QUEStions/7996919/Should-url-be-case-sensitive.

On the other hand, Wikipedia is case sensitive except the first character of the title. The URLs https://en.wikipedia.org/wiki/Case_sensitivity and https://en.wikipedia.org/wiki/case_sensitivity leads to the same article, but https://en.wikipedia.org/wiki/CASE_SENSITIVITY returns 404.

You could label an image so when you click on it the click event of the button will be triggered. You can simply make the normal button invisible:

<form>
    <label for="fileButton"><img src="YourSource"></label>    <!--You don't have to put an image here, it can be anything you like-->
    <input type="file" id="fileButton" style="display:none;"/>
</form>

It worked for me on all browsers, and is very easy to use.

If you are using SQL Server 2005 or greater, depending on the size of the data in the Notes field, you may want to consider casting to nvarchar(max) instead of casting to a specific length which could result in string truncation.

Select Cast(notes as nvarchar(max)) + 'SomeText' From NotesTable a

Another option to undo changes that weren't staged for commit is to run:

git restore <file>

To discard changes in the working directory.

You can use .offset() to get the offset compared to the document element and then use the scrollTop property of the window element to find how far down the page the user has scrolled:

var scrollTop     = $(window).scrollTop(),
    elementOffset = $('#my-element').offset().top,
    distance      = (elementOffset - scrollTop);

The distance variable now holds the distance from the top of the #my-element element and the top-fold.

Here is a demo: http://jsfiddle.net/Rxs2m/

Note that negative values mean that the element is above the top-fold.

Updated July 2016

As of July 2016, the Download ZIP button has moved under Clone or download to extreme-right of header under the Code tab:

If you don't see the button:

• Make sure you've selected <> Code tab from right side navigation menu, or

• Repo may not have a zip prepared. Add /archive/master.zip to the end of the repository URL and to generate a zipfile of the master branch.

  http://github.com/user/repository/

-to-

http://github.com/user/repository/archive/master.zip

to get the master branch source code in a zip file. You can do the same with tags and branch names, by replacing master in the URL above with the name of the branch or tag.

var config = {
      '.chosen-select'           : {},
      '.chosen-select-deselect'  : {allow_single_deselect:true},
      '.chosen-select-no-single' : {disable_search_threshold:10},
      '.chosen-select-no-results': {no_results_text:'Oops, nothing found!'},
      '.chosen-select-width'     : {width:"95%"}
    }
    for (var selector in config) {
      $(selector).chosen(config[selector]);
    }

Use above config and apply class='chosen-select-deselect' for manually deselect and set the value empty

or if you want deselect option in all combo then apply config like below

var config = {
  '.chosen-select'           : {allow_single_deselect:true},//Remove if you do not need X button in combo
  '.chosen-select-deselect'  : {allow_single_deselect:true},
  '.chosen-select-no-single' : {disable_search_threshold:10},
  '.chosen-select-no-results': {no_results_text:'Oops, nothing found!'},
  '.chosen-select-width'     : {width:"95%"}
}
for (var selector in config) {
  $(selector).chosen(config[selector]);
}

The platform is not specified, but in C# (.NET) it would be:

Regular expression (presumes the multiline option - the example below uses it):

    [ \t]+(\r?$)

Replacement:

    $1

For an explanation of "\r?$", see Regular Expression Options, Multiline Mode (MSDN).

Code example

This will remove all trailing spaces and all trailing TABs in all lines:

string inputText = "     Hello, World!  \r\n" +
                   "  Some other line\r\n" +
                   "     The last line  ";
string cleanedUpText = Regex.Replace(inputText,
                                     @"[ \t]+(\r?$)", @"$1",
                                     RegexOptions.Multiline);

Give this a try:

<!DOCTYPE html>
<html>
<head>
    <title>List Test</title>
    <style>
        li:hover {
            cursor: hand; cursor: pointer;
        }
    </style>
    <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.8.3/jquery.min.js"></script>
    <script>
        $(document).ready(function(){
            $("li").click(function(){
                $('#alltext').append($(this).text());
            });
        });
    </script>
</head>
<body>

    <h2>List items</h2>
    <ol>
        <li>Hello</li>
        <li>World</li>
        <li>Earthlings</li>
    </ol>
    <form>
        <textarea id="alltext"></textarea>
    </form>

</body>
</html>

Yes, it is possible to use @Transactional on private methods, but as others have mentioned this won't work out of the box. You need to use AspectJ. It took me some time to figure out how to get it working. I will share my results.

I chose to use compile-time weaving instead of load-time weaving because I think it's an overall better option. Also, I'm using Java 8 so you may need to adjust some parameters.

First, add the dependency for aspectjrt.

<dependency>
    <groupId>org.aspectj</groupId>
    <artifactId>aspectjrt</artifactId>
    <version>1.8.8</version>
</dependency>

Then add the AspectJ plugin to do the actual bytecode weaving in Maven (this may not be a minimal example).

<plugin>
    <groupId>org.codehaus.mojo</groupId>
    <artifactId>aspectj-maven-plugin</artifactId>
    <version>1.8</version>
    <configuration>
        <complianceLevel>1.8</complianceLevel>
        <source>1.8</source>
        <target>1.8</target>
        <aspectLibraries>
            <aspectLibrary>
                <groupId>org.springframework</groupId>
                <artifactId>spring-aspects</artifactId>
            </aspectLibrary>
        </aspectLibraries>
    </configuration>
    <executions>
        <execution>
            <goals>
                <goal>compile</goal>
            </goals>
        </execution>
    </executions>
</plugin>

Finally add this to your config class

@EnableTransactionManagement(mode = AdviceMode.ASPECTJ)

Now you should be able to use @Transactional on private methods.

One caveat to this approach: You will need to configure your IDE to be aware of AspectJ otherwise if you run the app via Eclipse for example it may not work. Make sure you test against a direct Maven build as a sanity check.

Give this a try:

PS> $nl = [Environment]::NewLine
PS> gci hklm:\software\microsoft\windows\currentversion\uninstall | 
        ForEach { $_.GetValue("DisplayName") } | Where {$_} | Sort |
        Foreach {"$_$nl"} | Out-File addrem.txt -Enc ascii

It yields the following text in my addrem.txt file:

Adobe AIR

Adobe Flash Player 10 ActiveX

...

Note: on my system, GetValue("DisplayName") returns null for some entries, so I filter those out. BTW, you were close with this:

ForEach-Object -Process { "$_.GetValue("DisplayName") `n" }

Except that within a string, if you need to access a property of a variable, that is, "evaluate an expression", then you need to use subexpression syntax like so:

Foreach-Object -Process { "$($_.GetValue('DisplayName'))`r`n" }

Essentially within a double quoted string PowerShell will expand variables like $_, but it won't evaluate expressions unless you put the expression within a subexpression using this syntax:

$(`<Multiple statements can go in here`>).

The extension is available but not installed in this database.

CREATE EXTENSION IF NOT EXISTS "uuid-ossp";

You can create an empty vector like so

vec <- numeric(0)

And then add elements using c()

vec <- c(vec, 1:5)

However as romunov says, it's much better to pre-allocate a vector and then populate it (as this avoids reallocating a new copy of your vector every time you add elements)

There is no real limit -- everything is named with a 160-bit name. The size of the file must be representable in a 64 bit number so no real limit there either.

There is a practical limit, though. I have a repository that's ~8GB with >880,000 files and git gc takes a while. The working tree is rather large so operations that inspect the entire working directory take quite a while. This repo is only used for data storage, though, so it's just a bunch of automated tools that handle it. Pulling changes from the repo is much, much faster than rsyncing the same data.

%find . -type f | wc -l
791887
%time git add .
git add .  6.48s user 13.53s system 55% cpu 36.121 total
%time git status
# On branch master
nothing to commit (working directory clean)
git status  0.00s user 0.01s system 0% cpu 47.169 total
%du -sh .
29G     .
%cd .git
%du -sh .
7.9G    .

The first solution is to use the java.util.Random class:

import java.util.Random;

Random rand = new Random();

// Obtain a number between [0 - 49].
int n = rand.nextInt(50);

// Add 1 to the result to get a number from the required range
// (i.e., [1 - 50]).
n += 1;

Another solution is using Math.random():

double random = Math.random() * 49 + 1;

or

int random = (int)(Math.random() * 50 + 1);

You can also define a variable without the EnvInject Plugin within your Groovy System Script:

import hudson.model.*
def build = Thread.currentThread().executable
def pa = new ParametersAction([
  new StringParameterValue("FOO", "BAR")
])
build.addAction(pa)

Then you can access this variable in the next build step which (for example) is an windows batch command:

@echo off
Setlocal EnableDelayedExpansion
echo FOO=!FOO!

This echo will show you "FOO=BAR".

Regards

Bootstrap Version 3.x

As always, read Bootstrap's great documentation:

3.x Docs: https://getbootstrap.com/docs/3.3/css/#grid-nesting

Make sure the parent level row is inside of a .container element. Whenever you'd like to nest rows, just open up a new .row inside of your column.

Here's a simple layout to work from:

<div class="container">
    <div class="row">
        <div class="col-xs-6">
            <div class="big-box">image</div>
        </div>
        <div class="col-xs-6">
            <div class="row">
                <div class="col-xs-6"><div class="mini-box">1</div></div>
                <div class="col-xs-6"><div class="mini-box">2</div></div>
                <div class="col-xs-6"><div class="mini-box">3</div></div>
                <div class="col-xs-6"><div class="mini-box">4</div></div>
            </div>
        </div>
    </div>
</div>

Bootstrap Version 4.0

4.0 Docs: http://getbootstrap.com/docs/4.0/layout/grid/#nesting

Here's an updated version for 4.0, but you should really read the entire docs section on the grid so you understand how to leverage this powerful feature

<div class="container">
  <div class="row">
    <div class="col big-box">
      image
    </div>

    <div class="col">
      <div class="row">
        <div class="col mini-box">1</div>
        <div class="col mini-box">2</div>
      </div>
      <div class="row">
        <div class="col mini-box">3</div>
        <div class="col mini-box">4</div>
      </div>
    </div>

  </div>
</div>

Demo in Fiddle jsFiddle 3.x | jsFiddle 4.0

Which will look like this (with a little bit of added styling):

Here, this api allows you to get fb, google and twitter profile pics easily

https://www.avatars.io/

It's an API that returns the profile image when given a username for a variety of social networks including Twitter, Facebook, Instagram, and gravatar. It has libraries for iOS, Android, Ruby, Node, PHP, Python, and JavaScript.

I found fiddling with styles.xml and activity to be too cumbersome hence created a common utility method which has below options set

Java

Window window = getWindow();
window.clearFlags(WindowManager.LayoutParams.FLAG_TRANSLUCENT_STATUS);
window.addFlags(WindowManager.LayoutParams.FLAG_DRAWS_SYSTEM_BAR_BACKGROUNDS);
window.getDecorView().setSystemUiVisibility(View.SYSTEM_UI_FLAG_LAYOUT_FULLSCREEN);
window.setStatusBarColor(Color.TRANSPARENT);

Kotlin DSL

activity.window.apply {
    clearFlags(WindowManager.LayoutParams.FLAG_TRANSLUCENT_STATUS)
    addFlags(WindowManager.LayoutParams.FLAG_DRAWS_SYSTEM_BAR_BACKGROUNDS)
    decorView.systemUiVisibility = View.SYSTEM_UI_FLAG_LAYOUT_FULLSCREEN
    statusBarColor = Color.TRANSPARENT
}

And that's all it took to achieve transparent status bar. Hope this helps.

Did you try setting the style:

input {
    text-align:right;
}

Just tested, this works fine (in FF3 at least):

<html>
    <head>
        <title>Blah</title>
        <style type="text/css">
        input { text-align:right; }
        </style>
    </head>
    <body>
        <input type="text" value="2">
    </body>
</html>

You'll probably want to throw a class on these inputs, and use that class as the selector. I would shy away from "rightAligned" or something like that. In a class name, you want to describe what the element's function is, not how it should be rendered. "numeric" might be good, or perhaps the business function of the text boxes.

You can do it using merge_all in the reshape package. You can pass parameters to merge using the ... argument

reshape::merge_all(list_of_dataframes, ...)

Here is an excellent resource on different methods to merge data frames.

sdk.dir didn't work for me because I had ANDROID_HOME environment variable with wrong path. So, solution is just to update ANDROID_HOME or remove it to use local.properties.
Android Studio restart is required after the change.

Use the dos2unix command in linux to convert the saved file. example :

dos2unix file_name

The motivation is to write code that doesn't depend explicitly on Spring. That way, if you choose to switch containers, you don't have to rewrite any code.

Think of the container as something is invisible to your code, magically providing for its needs, without being asked.

Dependency injection is a counterpoint to the "service locator" pattern. If you are going to lookup dependencies by name, you might as well get rid of the DI container and use something like JNDI.

For me, i forget to add AUTO_INCREMENT to my primary field and inserted data without id.

I had the same error, but it was caused by the package manager process port being already used (port 8081).

To fix, I just ran the react-native by specifying a different port, see below.

react-native run-ios --port 8090

If you have installed WAMP on your machine, please make sure that it is running. Do not EXIT the WAMP from tray menu since it will stop the MySQL Server.

Looks like that is the best way to do it:

String first = strs.iterator().next();

Great question... At first, it seems like an oversight for the Collection interface.

Note that "first" won't always return the first thing you put in the collection, and may only make sense for ordered collections. Maybe that is why there isn't a get(item) call, since the order isn't necessarily preserved.

While it might seem a bit wasteful, it might not be as bad as you think. The Iterator really just contains indexing information into the collection, not a usually a copy of the entire collection. Invoking this method does instantiate the Iterator object, but that is really the only overhead (not like copying all the elements).

For example, looking at the type returned by the ArrayList<String>.iterator() method, we see that it is ArrayList::Itr. This is an internal class that just accesses the elements of the list directly, rather than copying them.

Just be sure you check the return of iterator() since it may be empty or null depending on the implementation.

For someone looking to solve same by using maven. Add below dependency in POM:

<dependency>
    <groupId>com.microsoft.sqlserver</groupId>
    <artifactId>mssql-jdbc</artifactId>
    <version>7.0.0.jre8</version>
</dependency>

And use below code for connection:

String connectionUrl = "jdbc:sqlserver://localhost:1433;databaseName=master;user=sa;password=your_password";

try {
    System.out.print("Connecting to SQL Server ... ");
    try (Connection connection = DriverManager.getConnection(connectionUrl))        {
        System.out.println("Done.");
    }
} catch (Exception e) {
    System.out.println();
    e.printStackTrace();
}

Look for this link for other CRUD type of queries.

Use Fail module.

1. Use ignore_errors with every task that you need to ignore in case of errors.
2. Set a flag (say, result = false) whenever there is a failure in any task execution
3. At the end of the playbook, check if flag is set, and depending on that, fail the execution

- fail: msg="The execution has failed because of errors."
  when: flag == "failed"

Update:

Use register to store the result of a task like you have shown in your example. Then, use a task like this:

- name: Set flag
  set_fact: flag = failed
  when: "'FAILED' in command_result.stderr"

In case of Select2 Version 4+

it has changed syntax and you need to write like this:

// clear all option
$('#select_with_blank_data').html('').select2({data: [{id: '', text: ''}]});

// clear and add new option
$("#select_with_data").html('').select2({data: [
 {id: '', text: ''},
 {id: '1', text: 'Facebook'},
 {id: '2', text: 'Youtube'},
 {id: '3', text: 'Instagram'},
 {id: '4', text: 'Pinterest'}]});



//  append option
$("#select_with_data").append('<option value="5">Twitter</option>');
$("#select_with_data").val('5');
$("#select_with_data").trigger('change');

I got solution. For pre-8.0 devices, you have to just use startService(), but for post-7.0 devices, you have to use startForgroundService(). Here is sample for code to start service.

if (Build.VERSION.SDK_INT >= Build.VERSION_CODES.O) {
        context.startForegroundService(new Intent(context, ServedService.class));
    } else {
        context.startService(new Intent(context, ServedService.class));
    }

And in service class, please add the code below for notification:

@Override
public void onCreate() {
    super.onCreate();
    startForeground(1,new Notification());
}

Where O is Android version 26.

If you don't want your service to run in Foreground and want it to run in background instead, post Android O you must bind the service to a connection like below:

Intent serviceIntent = new Intent(context, ServedService.class);
context.startService(serviceIntent);
context.bindService(serviceIntent, new ServiceConnection() {
     @Override
     public void onServiceConnected(ComponentName name, IBinder service) {
         //retrieve an instance of the service here from the IBinder returned 
         //from the onBind method to communicate with 
     }

     @Override
     public void onServiceDisconnected(ComponentName name) {
     }
}, Context.BIND_AUTO_CREATE);

First 10 customers inserted into db (table customers):

select * from customers where customer_id <=
(select  min(customer_id)+10 from customers)

Last 10 customers inserted into db (table customers):

select * from customers where customer_id >=
(select  max(customer_id)-10 from customers)

Hope this helps....

PARTITION BY segregate sets, this enables you to be able to work(ROW_NUMBER(),COUNT(),SUM(),etc) on related set independently.

In your query, the related set comprised of rows with similar cdt.country_code, cdt.account, cdt.currency. When you partition on those columns and you apply ROW_NUMBER on them. Those other columns on those combination/set will receive sequential number from ROW_NUMBER

But that query is funny, if your partition by some unique data and you put a row_number on it, it will just produce same number. It's like you do an ORDER BY on a partition that is guaranteed to be unique. Example, think of GUID as unique combination of cdt.country_code, cdt.account, cdt.currency

newid() produces GUID, so what shall you expect by this expression?

select
   hi,ho,
   row_number() over(partition by newid() order by hi,ho)
from tbl;

...Right, all the partitioned(none was partitioned, every row is partitioned in their own row) rows' row_numbers are all set to 1

Basically, you should partition on non-unique columns. ORDER BY on OVER needed the PARTITION BY to have a non-unique combination, otherwise all row_numbers will become 1

An example, this is your data:

create table tbl(hi varchar, ho varchar);

insert into tbl values
('A','X'),
('A','Y'),
('A','Z'),
('B','W'),
('B','W'),
('C','L'),
('C','L');

Then this is analogous to your query:

select
   hi,ho,
   row_number() over(partition by hi,ho order by hi,ho)
from tbl;

What will be the output of that?

HI  HO  COLUMN_2
A   X   1
A   Y   1
A   Z   1
B   W   1
B   W   2
C   L   1
C   L   2

You see thee combination of HI HO? The first three rows has unique combination, hence they are set to 1, the B rows has same W, hence different ROW_NUMBERS, likewise with HI C rows.

Now, why is the ORDER BY needed there? If the previous developer merely want to put a row_number on similar data (e.g. HI B, all data are B-W, B-W), he can just do this:

select
   hi,ho,
   row_number() over(partition by hi,ho)
from tbl;

But alas, Oracle(and Sql Server too) doesn't allow partition with no ORDER BY; whereas in Postgresql, ORDER BY on PARTITION is optional: http://www.sqlfiddle.com/#!1/27821/1

select
   hi,ho,
   row_number() over(partition by hi,ho)
from tbl;

Your ORDER BY on your partition look a bit redundant, not because of the previous developer's fault, some database just don't allow PARTITION with no ORDER BY, he might not able find a good candidate column to sort on. If both PARTITION BY columns and ORDER BY columns are the same just remove the ORDER BY, but since some database don't allow it, you can just do this:

SELECT cdt.*,
        ROW_NUMBER ()
        OVER (PARTITION BY cdt.country_code, cdt.account, cdt.currency
              ORDER BY newid())
           seq_no
   FROM CUSTOMER_DETAILS cdt

You cannot find a good column to use for sorting similar data? You might as well sort on random, the partitioned data have the same values anyway. You can use GUID for example(you use newid() for SQL Server). So that has the same output made by previous developer, it's unfortunate that some database doesn't allow PARTITION with no ORDER BY

Though really, it eludes me and I cannot find a good reason to put a number on the same combinations (B-W, B-W in example above). It's giving the impression of database having redundant data. Somehow reminded me of this: How to get one unique record from the same list of records from table? No Unique constraint in the table

It really looks arcane seeing a PARTITION BY with same combination of columns with ORDER BY, can not easily infer the code's intent.

Live test: http://www.sqlfiddle.com/#!3/27821/6

But as dbaseman have noticed also, it's useless to partition and order on same columns.

You have a set of data like this:

create table tbl(hi varchar, ho varchar);

insert into tbl values
('A','X'),
('A','X'),
('A','X'),
('B','Y'),
('B','Y'),
('C','Z'),
('C','Z');

Then you PARTITION BY hi,ho; and then you ORDER BY hi,ho. There's no sense numbering similar data :-) http://www.sqlfiddle.com/#!3/29ab8/3

select
   hi,ho,
   row_number() over(partition by hi,ho order by hi,ho) as nr
from tbl;

Output:

HI  HO  ROW_QUERY_A
A   X   1
A   X   2
A   X   3
B   Y   1
B   Y   2
C   Z   1
C   Z   2

See? Why need to put row numbers on same combination? What you will analyze on triple A,X, on double B,Y, on double C,Z? :-)

You just need to use PARTITION on non-unique column, then you sort on non-unique column(s)'s unique-ing column. Example will make it more clear:

create table tbl(hi varchar, ho varchar);

insert into tbl values
('A','D'),
('A','E'),
('A','F'),
('B','F'),
('B','E'),
('C','E'),
('C','D');

select
   hi,ho,
   row_number() over(partition by hi order by ho) as nr
from tbl;

PARTITION BY hi operates on non unique column, then on each partitioned column, you order on its unique column(ho), ORDER BY ho

Output:

HI  HO  NR
A   D   1
A   E   2
A   F   3
B   E   1
B   F   2
C   D   1
C   E   2

That data set makes more sense

Live test: http://www.sqlfiddle.com/#!3/d0b44/1

And this is similar to your query with same columns on both PARTITION BY and ORDER BY:

select
   hi,ho,
   row_number() over(partition by hi,ho order by hi,ho) as nr
from tbl;

And this is the ouput:

HI  HO  NR
A   D   1
A   E   1
A   F   1
B   E   1
B   F   1
C   D   1
C   E   1

See? no sense?

Live test: http://www.sqlfiddle.com/#!3/d0b44/3

Finally this might be the right query:

SELECT cdt.*,
     ROW_NUMBER ()
     OVER (PARTITION BY cdt.country_code, cdt.account -- removed: cdt.currency
           ORDER BY 
               -- removed: cdt.country_code, cdt.account, 
               cdt.currency) -- keep
        seq_no
FROM CUSTOMER_DETAILS cdt

for (var i = 0; i < array.length; i++) {
    $(".element").append('<span>' + array[i] + '</span>');
}

If you sent a pull request on a repository where you don't have the rights to close it, you can delete the branch from where the pull request originated. That will cancel the pull request.

Cprcrack's answer works very well for API levels 19 and under. Just a minor addition to cprcrack's onShowCustomView will get it working on API level 21+

if (Build.VERSION.SDK_INT >= 21) {
      videoViewContainer.setBackgroundColor(Color.BLACK);
      ((ViewGroup) webView.getParent()).addView(videoViewContainer);
      webView.scrollTo(0,0);  // centers full screen view 
} else {
      activityNonVideoView.setVisibility(View.INVISIBLE);
      ViewGroup.LayoutParams vg = new ViewGroup.LayoutParams(ViewGroup.LayoutParams.MATCH_PARENT,
                    ViewGroup.LayoutParams.MATCH_PARENT);
      activityVideoView.addView(videoViewContainer,vg);
      activityVideoView.setVisibility(View.VISIBLE);
}

You will also need to reflect the changes in onHideCustomView

If you want to add you custom Overlay screen on Layout, you can create a Custom Linear Layout and get control of drawing and key events. You can my tutorial- Overlay on Android Layout- http://prasanta-paul.blogspot.com/2010/08/overlay-on-android-layout.html

In 2021 - use ES6 Template Literals for this task. If you need IE11 Support - use a transpiler.

let a = `something       something`;

Template Literals are fast, powerful and produce cleaner code.

If you need IE11 support and you don't have transpiler, stay strong and use \xa0 - it is a NO-BREAK SPACE char.

Reference from UTF-8 encoding table and Unicode characters, you can write as below:

var a = 'something' + '\xa0\xa0\xa0\xa0\xa0\xa0\xa0' + 'something';

there is a nicer alternative - use query() method:

In [58]: df = pd.DataFrame({'closing_price': np.random.randint(95, 105, 10)})

In [59]: df
Out[59]:
   closing_price
0            104
1             99
2             98
3             95
4            103
5            101
6            101
7             99
8             95
9             96

In [60]: df.query('99 <= closing_price <= 101')
Out[60]:
   closing_price
1             99
5            101
6            101
7             99

UPDATE: answering the comment:

I like the syntax here but fell down when trying to combine with expresison; df.query('(mean + 2 *sd) <= closing_price <=(mean + 2 *sd)')

In [161]: qry = "(closing_price.mean() - 2*closing_price.std())" +\
     ...:       " <= closing_price <= " + \
     ...:       "(closing_price.mean() + 2*closing_price.std())"
     ...:

In [162]: df.query(qry)
Out[162]:
   closing_price
0             97
1            101
2             97
3             95
4            100
5             99
6            100
7            101
8             99
9             95

Instead of using a regular expression, just check if string.length > 25

99.9% likely that you have corrupted memory (over- or under-flowed a buffer, wrote to a pointer after it was freed, called free twice on the same pointer, etc.)

Run your code under Valgrind to see where your program did something incorrect.

It needs to be HTML-escaped, not Javascript-escaped. Change \" to "

I've done this, "parsing" a json response for a particular value, as follows:

curl $url | grep $var | awk '{print $2}' | sed s/\"//g 

Clearly, $url here would be the twitter url, and $var would be "text" to get the response for that var.

Really, I think the only thing I'm doing the OP has left out is grep for the line with the specific variable he seeks. Awk grabs the second item on the line, and with sed I strip the quotes.

Someone smarter than I am could probably do the whole think with awk or grep.

Now, you could do it all with just sed:

curl $url | sed '/text/!d' | sed s/\"text\"://g | sed s/\"//g | sed s/\ //g

thus, no awk, no grep...I don't know why I didn't think of that before. Hmmm...

Its a fixed version of MaxOvrdrv's Code.

public static bool IsReadable(this DirectoryInfo di)
{
    AuthorizationRuleCollection rules;
    WindowsIdentity identity;
    try
    {
        rules = di.GetAccessControl().GetAccessRules(true, true, typeof(SecurityIdentifier));
        identity = WindowsIdentity.GetCurrent();
    }
    catch (UnauthorizedAccessException uae)
    {
        Debug.WriteLine(uae.ToString());
        return false;
    }

    bool isAllow = false;
    string userSID = identity.User.Value;

    foreach (FileSystemAccessRule rule in rules)
    {
        if (rule.IdentityReference.ToString() == userSID || identity.Groups.Contains(rule.IdentityReference))
        {
            if ((rule.FileSystemRights.HasFlag(FileSystemRights.Read) ||
                rule.FileSystemRights.HasFlag(FileSystemRights.ReadAttributes) ||
                rule.FileSystemRights.HasFlag(FileSystemRights.ReadData)) && rule.AccessControlType == AccessControlType.Deny)
                return false;
            else if ((rule.FileSystemRights.HasFlag(FileSystemRights.Read) &&
                rule.FileSystemRights.HasFlag(FileSystemRights.ReadAttributes) &&
                rule.FileSystemRights.HasFlag(FileSystemRights.ReadData)) && rule.AccessControlType == AccessControlType.Allow)
                isAllow = true;

        }
    }
    return isAllow;
}

public static bool IsWriteable(this DirectoryInfo me)
{
    AuthorizationRuleCollection rules;
    WindowsIdentity identity;
    try
    {
        rules = me.GetAccessControl().GetAccessRules(true, true, typeof(System.Security.Principal.SecurityIdentifier));
        identity = WindowsIdentity.GetCurrent();
    }
    catch (UnauthorizedAccessException uae)
    {
        Debug.WriteLine(uae.ToString());
        return false;
    }

    bool isAllow = false;
    string userSID = identity.User.Value;

    foreach (FileSystemAccessRule rule in rules)
    {
        if (rule.IdentityReference.ToString() == userSID || identity.Groups.Contains(rule.IdentityReference))
        {
            if ((rule.FileSystemRights.HasFlag(FileSystemRights.Write) ||
                rule.FileSystemRights.HasFlag(FileSystemRights.WriteAttributes) ||
                rule.FileSystemRights.HasFlag(FileSystemRights.WriteData) ||
                rule.FileSystemRights.HasFlag(FileSystemRights.CreateDirectories) ||
                rule.FileSystemRights.HasFlag(FileSystemRights.CreateFiles)) && rule.AccessControlType == AccessControlType.Deny)
                return false;
            else if ((rule.FileSystemRights.HasFlag(FileSystemRights.Write) &&
                rule.FileSystemRights.HasFlag(FileSystemRights.WriteAttributes) &&
                rule.FileSystemRights.HasFlag(FileSystemRights.WriteData) &&
                rule.FileSystemRights.HasFlag(FileSystemRights.CreateDirectories) &&
                rule.FileSystemRights.HasFlag(FileSystemRights.CreateFiles)) && rule.AccessControlType == AccessControlType.Allow)
                isAllow = true;

        }
    }
    return isAllow;
}

You can use System.out.printf() like this if you want to get nicely formatted

System.out.printf("%-20s %s\n", Name, Income);

Prints like:

Jaden             100000.0
Angela            70000.0
Bob               10000.0

This format means:

%-20s  -> this is the first argument, Name, left justified and padded to 20 spaces.
%s     -> this is the second argument, Income, if income is a decimal swap with %f
\n     -> new line character

You could also add formatting to the Income argument so that the number is printed as desired

Check out this for a quick reference

To those on macOS Catalina using the zsh shell who have also installed the postgres app:

Open your ~/.zshrc file, and add the following line:

export PATH="/Applications/Postgres.app/Contents/Versions/latest/bin:$PATH"

Then close all your terminals, reopen them, and you'll have resolved your problem.

If you don't want to close your terminals, simply enter source ~/.zshrc in whatever terminal you'd like to keep working on.

the final sql statement is something like:

select col_1 from table_X where col_2 = 'abcd';

i run this inside my SQL IDE and everything is ok.

Next, i try to build this statement with java:

String queryString= "select col_1 from table_X where col_2 = '?';";
PreparedStatement stmt = con.prepareStatement(queryString);
stmt.setString(1, "abcd"); //raises java.sql.SQLException: Invalid column index

Although the sql statement (the first one, ran against the database) contains quotes around string values, and also finishes with a semicolumn, the string that i pass to the PreparedStatement should not contain quotes around the wildcard character ?, nor should it finish with semicolumn.

i just removed the characters that appear on white background

"select col_1 from table_X where col_2 = ' ? ' ; ";

to obtain

"select col_1 from table_X where col_2 = ?";

(i found the solution here: https://coderanch.com/t/424689/databases/java-sql-SQLException-Invalid-column)

One thing that got this working for me is to make sure that github.com is in ~jenkins/.ssh/known_hosts.

There are two ways to achieve this.

1- As already proposed u can set the background of your spinner as custom 9 patch Image with all the adjustments made into it .

android:background="@drawable/btn_dropdown" 
android:clickable="true"
android:dropDownVerticalOffset="-10dip"
android:dropDownHorizontalOffset="0dip"
android:gravity="center"

If you want your Spinner to show With various different background colors i would recommend making the drop down image transparent, & loading that spinner in a relative layout with your color set in.

btn _dropdown is as:

<selector xmlns:android="http://schemas.android.com/apk/res/android">
<item
    android:state_window_focused="false" android:state_enabled="true"
    android:drawable="@drawable/spinner_default" />
<item
    android:state_window_focused="false" android:state_enabled="false"
    android:drawable="@drawable/spinner_default" />
<item
    android:state_pressed="true"
    android:drawable="@drawable/spinner_pressed" />
<item
    android:state_focused="true" android:state_enabled="true"
    android:drawable="@drawable/spinner_pressed" />
<item
    android:state_enabled="true"
    android:drawable="@drawable/spinner_default" />
<item
    android:state_focused="true"
    android:drawable="@drawable/spinner_pressed" />
<item
    android:drawable="@drawable/spinner_default" />
</selector>

where the various states of pngwould define your various States of spinner seleti

Prints pubkey and avoid the changed status by adding changed_when: False to cat task:

- name: Generate SSH keys for vagrant user   
  user: name=vagrant generate_ssh_key=yes ssh_key_bits=2048

- name: Check SSH public key   
  command: /bin/cat $home_directory/.ssh/id_rsa.pub
  register: cat
  changed_when: False

- name: Print SSH public key
  debug: var=cat.stdout

- name: Wait for user to copy SSH public key   
  pause: prompt="Please add the SSH public key above to your GitHub account"

/*
 * invalid margin
 */
private void invalidMarginBottom() {
    RelativeLayout.LayoutParams lp = (RelativeLayout.LayoutParams) frameLayoutContent.getLayoutParams();
    lp.setMargins(0, 0, 0, 0);
    frameLayoutContent.setLayoutParams(lp);
}

you should be ware of the type of the view's viewGroup.In the code above, for example,I want to change the frameLayout's margin,and the frameLayout's view group is a RelativeLayout,so you need to covert to (RelativeLayout.LayoutParams)

I ran into this problem today when Xcode crashed during a branch merge. Somehow the file was uploaded to the svn repository but it wasn't recorded in the svn db properly. I ran the following commands in the directory where the file existed locally:

svn revert bad.file
svn del svn://my.svnserver.com/svnDB/path/to/the/offending/file/bad.file

Then I re-added the file from my local system:

svn add bad.file
svn commit -m "Re adding bad.file"

Success!

Solution: In order to increase your buffer history on iterm bash terminal you've got two options:

Go to iterm -> Preferences -> Profiles -> Terminal Tab -> Scrollback Buffer (section)

Option 1. select the checkbox Unlimited scrollback

Option 2. type the selected Scrollback lines numbers you'd like your terminal buffer to cache (See image below)

I like to use zip(*iterable) (which is the piece of code you're looking for) in my programs as so:

def unzip(iterable):
    return zip(*iterable)

I find unzip more readable.

def function(a):
    if a == '1':
        print ('1a')
    else if a == '2'
        print ('2a')
    else print ('3a')

Should be corrected to:

def function(a):
    if a == '1':
        print('1a')
    elif a == '2':
        print('2a')
    else:
        print('3a')

As you can see, else if should be changed to elif, there should be colons after '2' and else, there should be a new line after the else statement, and close the space between print and the parentheses.

alternatively, you can try writing a specific element:

    //label[1] is the first element.
    el =  await driver.findElement(By.xpath("//div[@class=\"facetContainerDiv\"]/div/label[1]/input")));
    await el.click();

More information can be found here: https://www.browserstack.com/guide/locators-in-selenium

SELECT DATEDIFF(max_date, min_date) as days from my table. This works even if the col max_date and min_date are in string data types.

var i=0; 
function increment() {           
    i++;       
    document.getElementById('number').innerHTML=i;
}

There are two differences between static inner and non static inner classes.

1. In case of declaring member fields and methods, non static inner class cannot have static fields and methods. But, in case of static inner class, can have static and non static fields and method.

2. The instance of non static inner class is created with the reference of object of outer class, in which it has defined, this means it has enclosing instance. But the instance of static inner class is created without the reference of Outer class, which means it does not have enclosing instance.

See this example

class A
{
    class B
    {
        // static int x; not allowed here
    }

    static class C
    {
        static int x; // allowed here
    }
}

class Test
{
    public static void main(String… str)
    {
        A a = new A();

        // Non-Static Inner Class
        // Requires enclosing instance
        A.B obj1 = a.new B(); 

        // Static Inner Class
        // No need for reference of object to the outer class
        A.C obj2 = new A.C(); 
    }
}

RecyclerView doesn't provide straightforward interface for drawing dividers of lists. But actually it provides us a much more flexible way to draw dividers. We use RecyclerView.ItemDecoration to decorate RecyclerView's tiles with dividers or anything you want. That is also why it is called ItemDecoration.

As described in Meterial Design Guidelines:

The divider sits within the baseline of the tile.

So if you want to follow the Material Design Guidelines, you don't need extra space to draw the dividers. Just draw them on the tiles. However, you have the right to do whatever you want to do. So I implemented one which gives you the ability to set insets as well as draw on/underneath the tiles.

public class InsetDivider extends RecyclerView.ItemDecoration {

    public static final int HORIZONTAL_LIST = LinearLayoutManager.HORIZONTAL;
    public static final int VERTICAL_LIST = LinearLayoutManager.VERTICAL;

    private Paint mPaint;
    // in pixel
    private int mDividerHeight;
    // left inset for vertical list, top inset for horizontal list
    private int mFirstInset;
    // right inset for vertical list, bottom inset for horizontal list
    private int mSecondInset;
    private int mColor;
    private int mOrientation;
    // set it to true to draw divider on the tile, or false to draw beside the tile.
    // if you set it to false and have inset at the same time, you may see the background of
    // the parent of RecyclerView.
    private boolean mOverlay;

    private InsetDivider() {
        mPaint = new Paint(Paint.ANTI_ALIAS_FLAG);
        mPaint.setStyle(Paint.Style.FILL);
    }

    public int getDividerHeight() {
        return mDividerHeight;
    }

    public void setDividerHeight(int dividerHeight) {
        this.mDividerHeight = dividerHeight;
    }

    public int getFirstInset() {
        return mFirstInset;
    }

    public void setFirstInset(int firstInset) {
        this.mFirstInset = firstInset;
    }

    public int getSecondInset() {
        return mSecondInset;
    }

    public void setSecondInset(int secondInset) {
        this.mSecondInset = secondInset;
    }

    public int getColor() {
        return mColor;
    }

    public void setColor(int color) {
        this.mColor = color;
        mPaint.setColor(color);
    }

    public int getOrientation() {
        return mOrientation;
    }

    public void setOrientation(int orientation) {
        this.mOrientation = orientation;
    }

    public boolean getOverlay() {
        return mOverlay;
    }

    public void setOverlay(boolean overlay) {
        this.mOverlay = overlay;
    }

    @Override
    public void onDrawOver(Canvas c, RecyclerView parent, RecyclerView.State state) {
        if (mOrientation == VERTICAL_LIST) {
            drawVertical(c, parent);
        } else {
            drawHorizontal(c, parent);
        }
    }

    protected void drawVertical(Canvas c, RecyclerView parent) {
        final int left = parent.getPaddingLeft() + mFirstInset;
        final int right = parent.getWidth() - parent.getPaddingRight() - mSecondInset;
        final int childCount = parent.getChildCount();
        for (int i = 0; i < childCount; i++) {
            final View child = parent.getChildAt(i);
            if (parent.getChildAdapterPosition(child) == (parent.getAdapter().getItemCount() - 1)) {
                continue;
            }
            final RecyclerView.LayoutParams params = (RecyclerView.LayoutParams) child.getLayoutParams();
            final int bottom;
            final int top;
            if (mOverlay) {
                bottom = child.getBottom() + params.bottomMargin + Math.round(ViewCompat.getTranslationY(child));
                top = bottom - mDividerHeight;
            } else {
                top = child.getBottom() + params.bottomMargin + Math.round(ViewCompat.getTranslationY(child));
                bottom = top + mDividerHeight;
            }
            c.drawRect(left, top, right, bottom, mPaint);
        }
    }

    protected void drawHorizontal(Canvas c, RecyclerView parent) {
        final int top = parent.getPaddingTop() + mFirstInset;
        final int bottom = parent.getHeight() - parent.getPaddingBottom() - mSecondInset;
        final int childCount = parent.getChildCount();
        for (int i = 0; i < childCount; i++) {
            final View child = parent.getChildAt(i);
            if (parent.getChildAdapterPosition(child) == (parent.getAdapter().getItemCount() - 1)) {
                continue;
            }
            final RecyclerView.LayoutParams params = (RecyclerView.LayoutParams) child
                .getLayoutParams();
            final int right;
            final int left;
            if (mOverlay) {
                right = child.getRight() + params.rightMargin + Math.round(ViewCompat.getTranslationX(child));
                left = right - mDividerHeight;
            } else {
                left = child.getRight() + params.rightMargin + Math.round(ViewCompat.getTranslationX(child));
                right = left + mDividerHeight;
            }
            c.drawRect(left, top, right, bottom, mPaint);
        }
    }

    @Override
    public void getItemOffsets(Rect outRect, View view, RecyclerView parent, RecyclerView.State state) {
        if (mOverlay) {
            super.getItemOffsets(outRect, view, parent, state);
            return;
        }

        if (mOrientation == VERTICAL_LIST) {
            outRect.set(0, 0, 0, mDividerHeight);
        } else {
            outRect.set(0, 0, mDividerHeight, 0);
        }
    }

    /**
     * Handy builder for creating {@link InsetDivider} instance.
     */
    public static class Builder {

        private Context mContext;
        private int mDividerHeight;
        private int mFirstInset;
        private int mSecondInset;
        private int mColor;
        private int mOrientation;
        private boolean mOverlay = true; // set default to true to follow Material Design Guidelines

        public Builder(Context context) {
            mContext = context;
        }

        public Builder dividerHeight(int dividerHeight) {
            mDividerHeight = dividerHeight;
            return this;
        }

        public Builder insets(int firstInset, int secondInset) {
            mFirstInset = firstInset;
            mSecondInset = secondInset;
            return this;
        }

        public Builder color(@ColorInt int color) {
            mColor = color;
            return this;
        }

        public Builder orientation(int orientation) {
            mOrientation = orientation;
            return this;
        }

        public Builder overlay(boolean overlay) {
            mOverlay = overlay;
            return this;
        }

        public InsetDivider build() {
            InsetDivider insetDivider = new InsetDivider();

            if (mDividerHeight == 0) {
                // Set default divider height to 1dp.
                 insetDivider.setDividerHeight(mContext.getResources().getDimensionPixelSize(R.dimen.divider_height));
            } else if (mDividerHeight > 0) {
                insetDivider.setDividerHeight(mDividerHeight);
            } else {
                throw new IllegalArgumentException("Divider's height can't be negative.");
            }

            insetDivider.setFirstInset(mFirstInset < 0 ? 0 : mFirstInset);
            insetDivider.setSecondInset(mSecondInset < 0 ? 0 : mSecondInset);

            if (mColor == 0) {
                throw new IllegalArgumentException("Don't forget to set color");
            } else {
                insetDivider.setColor(mColor);
            }

            if (mOrientation != InsetDivider.HORIZONTAL_LIST && mOrientation != InsetDivider.VERTICAL_LIST) {
                throw new IllegalArgumentException("Invalid orientation");
            } else {
                insetDivider.setOrientation(mOrientation);
            }

            insetDivider.setOverlay(mOverlay);

            return insetDivider;
        }
    }
}

And you can use it like this:

ItemDecoration divider = new InsetDivider.Builder(this)
                            .orientation(InsetDivider.VERTICAL_LIST) 
                            .dividerHeight(getResources().getDimensionPixelSize(R.dimen.divider_height))
                            .color(getResources().getColor(R.color.colorAccent))
                            .insets(getResources().getDimensionPixelSize(R.dimen.divider_inset), 0)
                            .overlay(true)
                            .build(); 

RecyclerView recyclerView = (RecyclerView) findViewById(R.id.recycler_view);
recyclerView.setLayoutManager(new LinearLayoutManager(this));
recyclerView.addItemDecoration(divider);

I also wrote a demo App about how to implement ItemDecoration and how to use them. You can check out my GitHub repo Dividers-For-RecyclerView. There are three implementations in it:

• UnderneathDivider
• OverlayDivider
• InsetDivider

As c69 mentioned there is no way to do it with pure CSS.

but you can use HTML instead:

use

<head>
    <base target="_blank">
</head>

in your HTML <head> tag for making all of page links which not include target attribute to be opened in a new blank window by default. otherwise you can set target attribute for each link like this:

    <a href="/yourlink.html" target="_blank">test-link</a>

and it will override

<head>
    <base target="_blank">
</head>

tag if it was defined previously.

UPDATE

From later versions, there is no need to manually install gulp-util.

Check the new getting started page.

If you still hit this problem try reinstalling your project's local packages:

rm -rf node_modules/
npm install

OUTDATED ANSWER

You also need to install gulp-util:

 npm install gulp-util --save-dev

From gulp docs- getting started (3.5):

Install gulp and gulp-util in your project devDependencies

Besides the session cookie (which is kind of standard), I don't want to use extra cookies.

I found a solution which works for me when building a Single Page Web Application (SPA), with many AJAX requests. Note: I am using server side Java and client side JQuery, but no magic things so I think this principle can be implemented in all popular programming languages.

My solution without extra cookies is simple:

Client Side

Store the CSRF token which is returned by the server after a succesful login in a global variable (if you want to use web storage instead of a global thats fine of course). Instruct JQuery to supply a X-CSRF-TOKEN header in each AJAX call.

The main "index" page contains this JavaScript snippet:

// Intialize global variable CSRF_TOKEN to empty sting. 
// This variable is set after a succesful login
window.CSRF_TOKEN = '';

// the supplied callback to .ajaxSend() is called before an Ajax request is sent
$( document ).ajaxSend( function( event, jqXHR ) {
    jqXHR.setRequestHeader('X-CSRF-TOKEN', window.CSRF_TOKEN);
}); 

Server Side

On successul login, create a random (and long enough) CSRF token, store this in the server side session and return it to the client. Filter certain (sensitive) incoming requests by comparing the X-CSRF-TOKEN header value to the value stored in the session: these should match.

Sensitive AJAX calls (POST form-data and GET JSON-data), and the server side filter catching them, are under a /dataservice/* path. Login requests must not hit the filter, so these are on another path. Requests for HTML, CSS, JS and image resources are also not on the /dataservice/* path, thus not filtered. These contain nothing secret and can do no harm, so this is fine.

@WebFilter(urlPatterns = {"/dataservice/*"})
...
String sessionCSRFToken = req.getSession().getAttribute("CSRFToken") != null ? (String) req.getSession().getAttribute("CSRFToken") : null;
if (sessionCSRFToken == null || req.getHeader("X-CSRF-TOKEN") == null || !req.getHeader("X-CSRF-TOKEN").equals(sessionCSRFToken)) {
    resp.sendError(401);
} else
    chain.doFilter(request, response);
}   

You are getting close!

# Find all of the text between paragraph tags and strip out the html
page = soup.find('p').getText()

Using find (as you've noticed) stops after finding one result. You need find_all if you want all the paragraphs. If the pages are formatted consistently ( just looked over one), you could also use something like

soup.find('div',{'id':'ctl00_PlaceHolderMain_RichHtmlField1__ControlWrapper_RichHtmlField'})

to zero in on the body of the article.

The documentation for Gerrit, in particular the "Push changes" section, explains that you push to the "magical refs/for/'branch' ref using any Git client tool".

The following image is taken from the Intro to Gerrit. When you push to Gerrit, you do git push gerrit HEAD:refs/for/<BRANCH>. This pushes your changes to the staging area (in the diagram, "Pending Changes"). Gerrit doesn't actually have a branch called <BRANCH>; it lies to the git client.

Internally, Gerrit has its own implementation for the Git and SSH stacks. This allows it to provide the "magical" refs/for/<BRANCH> refs.

When a push request is received to create a ref in one of these namespaces Gerrit performs its own logic to update the database, and then lies to the client about the result of the operation. A successful result causes the client to believe that Gerrit has created the ref, but in reality Gerrit hasn’t created the ref at all. [Link - Gerrit, "Gritty Details"].

After a successful patch (i.e, the patch has been pushed to Gerrit, [putting it into the "Pending Changes" staging area], reviewed, and the review has passed), Gerrit pushes the change from the "Pending Changes" into the "Authoritative Repository", calculating which branch to push it into based on the magic it did when you pushed to refs/for/<BRANCH>. This way, successfully reviewed patches can be pulled directly from the correct branches of the Authoritative Repository.

When using git rm, the removal will part of your next commit. So if you want to push the change you should use git rm

First thing to do is run this:

SHOW GRANTS;

You will quickly see you were assigned the anonymous user to authenticate into mysql.

Instead of logging into mysql with

mysql

login like this:

mysql -uroot

By default, root@localhost has all rights and no password.

If you cannot login as root without a password, do the following:

Step 01) Add the two options in the mysqld section of my.ini:

[mysqld]
skip-grant-tables
skip-networking

Step 02) Restart mysql

net stop mysql
<wait 10 seconds>
net start mysql

Step 03) Connect to mysql

mysql

Step 04) Create a password from root@localhost

UPDATE mysql.user SET password=password('whateverpasswordyoulike')
WHERE user='root' AND host='localhost';
exit

Step 05) Restart mysql

net stop mysql
<wait 10 seconds>
net start mysql

Step 06) Login as root with password

mysql -u root -p

You should be good from there.

CAVEAT: Please remove anonymous users !!!

I would use count() if they are the same, as in my experience it is more common, and therefore will cause less developers reading your code to say "sizeof(), what is that?" and having to consult the documentation.

I think it means sizeof() does not work like it does in C (calculating the size of a datatype). It probably made this mention explicitly because PHP is written in C, and provides a lot of identically named wrappers for C functions (strlen(), printf(), etc)

Some important facts were not given in other answers:

"async await" is more complex at CIL level and thus costs memory and CPU time.

Any task can be canceled if the waiting time is unacceptable.

In the case "async await" we do not have a handler for such a task to cancel it or monitoring it.

Using Task is more flexible then "async await".

Any sync functionality can by wrapped by async.

public async Task<ActionResult> DoAsync(long id) 
{ 
    return await Task.Run(() => { return DoSync(id); } ); 
} 

"async await" generate many problems. We do not now is await statement will be reached without runtime and context debugging. If first await not reached everything is blocked. Some times even await seems to be reached still everything is blocked:

https://github.com/dotnet/runtime/issues/36063

I do not see why I'm must live with the code duplication for sync and async method or using hacks.

Conclusion: Create Task manually and control them is much better. Handler to Task give more control. We can monitor Tasks and manage them:

https://github.com/lsmolinski/MonitoredQueueBackgroundWorkItem

Sorry for my english.

<div>

<div style="border:1px solid #cccccc; float:left; min-height:200px;">

Some content!<br/>
Some content!<br/>
Some content!<br/>
Some content!<br/>
Some content!<br/>

</div>

<div style="border:1px solid #cccccc; float:left; min-height:200px;">

Some content!

</div>

</div>

What I did here is to change the height to min-height and gave it a fixed value. if one of them is getting resized the other one will stay the same height. not sure if this is what you want

The usual rules should apply for how you send the request. If the request is to retrieve information (e.g. a partial search 'hint' result, or a new page to be displayed, etc...) you can use GET. If the data being sent is part of a request to change something (update a database, delete a record, etc..) then use POST.

Server-side, there's no reason to use the raw input, unless you want to grab the entire post/get data block in a single go. You can retrieve the specific information you want via the _GET/_POST arrays as usual. AJAX libraries such as MooTools/jQuery will handle the hard part of doing the actual AJAX calls and encoding form data into appropriate formats for you.

<form action="" method="get">
   <input type="text" name="search" required="required" placeholder="type here" />
   <input type="reset" value="" alt="clear" />
</form>

<style>
   input[type="text"]
   {
      height: 38px;
      font-size: 15pt;
   }

   input[type="text"]:invalid + input[type="reset"]{
     display: none;
   } 

   input[type="reset"]
   {
      background-image: url( http://png-5.findicons.com/files/icons/1150/tango/32/edit_clear.png );
      background-position: center center;
      background-repeat: no-repeat;
      height: 38px;
      width: 38px;
      border: none;
      background-color: transparent;
      cursor: pointer;
      position: relative;
      top: -9px;
      left: -44px;
   }
</style>

I tried almost all the solution given here.

Which worked for me is I opened the GIT GUI and in that tried to Push. Which ask for the credentials, enter correct userid and password it will start working again.

I have posted the following walkthrough for adding some fake word-wrapping to an SVG "text" element here:

SVG Word Wrap - Show stopper?

You just need to add a simple JavaScript function, which splits your string into shorter "tspan" elements. Here's an example of what it looks like:

Hope this helps !

You could use the or operator:

return x or "default"

Note that this also returns "default" if x is any falsy value, including an empty list, 0, empty string, or even datetime.time(0) (midnight).

You can do it the following way:

DoCmd.OpenQuery "yourQueryName", acViewNormal, acEdit

OR

CurrentDb.OpenRecordset("yourQueryName")

You can use a tool like the TrIDNet - File Identifier to look for the Magic Number and other telltales, if the file format is in it's database it may tell you what it is for.

However searching the definitions did not turn up anything for the string "FLDB", but it checks more than magic numbers so it is worth a try.

If you are using Linux File is a command that will do a similar task.

The other thing to try is if you have access to the program that generated this file, there may be DLL's or EXE's from the database software that may contain meta information about the dll's creator which could give you a starting point for looking for software that can read the file outside of the program that originally created the .db file.

Your original problem was wrong pattern symbol "h" which stands for the clock hour (range 1-12). In this case, the am-pm-information is missing. Better, use the pattern symbol "H" instead (hour of day in range 0-23). So the pattern should rather have been like:

uuuu-MM-dd'T'HH:mm:ss.SSSX (best pattern also suitable for strict mode)

@echo off
xcopy ...

Replace ... with the appropriate xcopy arguments to copy what you want copied.

The header function is used to send HTTP response headers back to the user (i.e. you cannot use it to create request headers.

May I ask why are you doing this? Why simulate a POST request when you can just right there and then act on the data someway? I'm assuming of course script.php resides on your server.

To create a POST request, open a up a TCP connection to the host using fsockopen(), then use fwrite() on the handler returned from fsockopen() with the same values you used in the header functions in the OP. Alternatively, you can use cURL.

Input. We will start with the text of the input shown in the question since the question did not provide the csv input:

Lines <- "Dates   Bajaj_close Hero_close
3/14/2013   1854.8  1669.1
3/15/2013   1850.3  1684.45
3/18/2013   1812.1  1690.5
3/19/2013   1835.9  1645.6
3/20/2013   1840    1651.15
3/21/2013   1755.3  1623.3
3/22/2013   1820.65 1659.6
3/25/2013   1802.5  1617.7
3/26/2013   1801.25 1571.85
3/28/2013   1799.55 1542"

zoo. "ts" class series normally do not represent date indexes but we can create a zoo series that does (see zoo package):

library(zoo)
z <- read.zoo(text = Lines, header = TRUE, format = "%m/%d/%Y")

Alternately, if you have already read this into a data frame DF then it could be converted to zoo as shown on the second line below:

DF <- read.table(text = Lines, header = TRUE)
z <- read.zoo(DF, format = "%m/%d/%Y")

In either case above z ia a zoo series with a "Date" class time index. One could also create the zoo series, zz, which uses 1, 2, 3, ... as the time index:

zz <- z
time(zz) <- seq_along(time(zz))

ts. Either of these could be converted to a "ts" class series:

as.ts(z)
as.ts(zz)

The first has a time index which is the number of days since the Epoch (January 1, 1970) and will have NAs for missing days and the second will have 1, 2, 3, ... as the time index and no NAs.

Monthly series. Typically "ts" series are used for monthly, quarterly or yearly series. Thus if we were to aggregate the input into months we could reasonably represent it as a "ts" series:

z.m <- as.zooreg(aggregate(z, as.yearmon, mean), freq = 12)
as.ts(z.m)

Try doing SHIFT + G and you will be at the end of the page, but you can't edit yet. Go to the top by doing G + G

After executing the below regex, your answer is in the first capture.

/^(.*?)\.txt/

Your application has an AppCompat theme

<application
    android:theme="@style/AppTheme">

But, you overwrote the Activity (which extends AppCompatActivity) with a theme that isn't descendant of an AppCompat theme

<activity android:name=".MainActivity"
    android:theme="@android:style/Theme.NoTitleBar.Fullscreen" >

You could define your own fullscreen theme like so (notice AppCompat in the parent=)

<style name="AppFullScreenTheme" parent="Theme.AppCompat.Light.NoActionBar">
    <item name="android:windowNoTitle">true</item>
    <item name="android:windowActionBar">false</item>
    <item name="android:windowFullscreen">true</item>
    <item name="android:windowContentOverlay">@null</item>
</style>

Then set that on the Activity.

<activity android:name=".MainActivity"
    android:theme="@style/AppFullScreenTheme" >

Note: There might be an AppCompat theme that's already full screen, but don't know immediately

Have you tried an approach like on this link? I'm not sure if createValueBinding() is still available but code like this should be accessible from a plain old Servlet. This does require to bean to already exist.

http://www.coderanch.com/t/211706/JSF/java/access-managed-bean-JSF-from

 FacesContext context = FacesContext.getCurrentInstance();  
 Application app = context.getApplication();
 // May be deprecated
 ValueBinding binding = app.createValueBinding("#{" + expr + "}"); 
 Object value = binding.getValue(context);

Your ProcExit label is your place where you release all the resources whether an error happened or not. For instance:

Public Sub SubA()
  On Error Goto ProcError

  Connection.Open
  Open File for Writing
  SomePreciousResource.GrabIt

ProcExit:  
  Connection.Close
  Connection = Nothing
  Close File
  SomePreciousResource.Release

  Exit Sub

ProcError:  
  MsgBox Err.Description  
  Resume ProcExit
End Sub

Linus is spot on in the approach, but a few properties are off. It looks like 'AgencyContractId' is your Primary Key, which is unrelated to the output you want to give the user. I think this is what you want (assuming you change your ViewModel to match the data you say you want in your view).

var agencyContracts = _agencyContractsRepository.AgencyContracts
    .GroupBy(ac => new
                   {
                       ac.AgencyID,
                       ac.VendorID,
                       ac.RegionID
                   })
    .Select(ac => new AgencyContractViewModel
                   {
                       AgencyId = ac.Key.AgencyID,
                       VendorId = ac.Key.VendorID,
                       RegionId = ac.Key.RegionID,
                       Total = ac.Sum(acs => acs.Amount) + ac.Sum(acs => acs.Fee)
                   });

I just found a free zip database that includes time offset and participation in DST. I do like Erik J's answer, as it would help me choose the actual time zone as opposed to just the offset (because you never can be completely sure on the rules), but I think I might start with this, and have it try to find the best time zone match based on offset/dst configuration. I think I may try to set up a simple version of Development 4.0's answer to check against what I get from the zip info as a sanity test. It's definitely not as simple as I'd hope, but a combination should get me at least 90% sure of a user's time zone.

You need mask:

sample['PR'] = sample['PR'].mask(sample['PR'] < 90, np.nan)

Another solution with loc and boolean indexing:

sample.loc[sample['PR'] < 90, 'PR'] = np.nan

Sample:

import pandas as pd
import numpy as np

sample = pd.DataFrame({'PR':[10,100,40] })
print (sample)
    PR
0   10
1  100
2   40

sample['PR'] = sample['PR'].mask(sample['PR'] < 90, np.nan)
print (sample)
      PR
0    NaN
1  100.0
2    NaN

sample.loc[sample['PR'] < 90, 'PR'] = np.nan
print (sample)
      PR
0    NaN
1  100.0
2    NaN

EDIT:

Solution with apply:

sample['PR'] = sample['PR'].apply(lambda x: np.nan if x < 90 else x)

Timings len(df)=300k:

sample = pd.concat([sample]*100000).reset_index(drop=True)

In [853]: %timeit sample['PR'].apply(lambda x: np.nan if x < 90 else x)
10 loops, best of 3: 102 ms per loop

In [854]: %timeit sample['PR'].mask(sample['PR'] < 90, np.nan)
The slowest run took 4.28 times longer than the fastest. This could mean that an intermediate result is being cached.
100 loops, best of 3: 3.71 ms per loop

You don't give a reproducible example but your warning message tells you exactly what the problem is.

memb only has a length of 10. I'm guessing the length of dih_y2$MemberID isn't a multiple of 10. When using ==, R spits out a warning if it isn't a multiple to let you know that it's probably not doing what you're expecting it to do. == does element-wise checking for equality. I suspect what you want to do is find which of the elements of dih_y2$MemberID are also in the vector memb. To do this you would want to use the %in% operator.

dih_col <- which(dih_y2$MemeberID %in% memb)

Thankfully, with C++11 there is also the more pleasing approach of using raw string literals.

printf("She said \"time flies like an arrow, but fruit flies like a banana\".");

Becomes:

printf(R"(She said "time flies like an arrow, but fruit flies like a banana".)");

With respect to the addition of brackets after the opening quote, and before the closing quote, note that they can be almost any combination of up to 16 characters, helping avoid the situation where the combination is present in the string itself. Specifically:

any member of the basic source character set except: space, the left parenthesis (, the right parenthesis ), the backslash , and the control characters representing horizontal tab, vertical tab, form feed, and newline" (N3936 §2.14.5 [lex.string] grammar) and "at most 16 characters" (§2.14.5/2)

How much clearer it makes this short strings might be debatable, but when used on longer formatted strings like HTML or JSON, it's unquestionably far clearer.

you should use magic methods __Set and __get. Simple example:

class Foo
{
    //This array stores your properties
private $content = array();

public function __set($key, $value)
{
            //Perform data validation here before inserting data
    $this->content[$key] = $value;
    return $this;
}

public function __get($value)
{       //You might want to check that the data exists here
    return $this->$content[$value];
}

}

Of course, don't use this example as this : no security at all :)

EDIT : seen your comments, here could be an alternative based on reflection and a decorator :

 class Foo
 {
private $content = array();
private $stdInstance;

public function __construct($stdInstance)
{
    $this->stdInstance = $stdInstance;
}

public function __set($key, $value)
{
    //Reflection for the stdClass object
    $ref = new ReflectionClass($this->stdInstance);
    //Fetch the props of the object

    $props = $ref->getProperties();

    if (in_array($key, $props)) {
        $this->stdInstance->$key = $value;
    } else {
        $this->content[$key] = $value;
    }
    return $this;
}

public function __get($value)
{
    //Search first your array as it is faster than using reflection
    if (array_key_exists($value, $this->content))
    {
        return $this->content[$value];
    } else {
        $ref = new ReflectionClass($this->stdInstance);

        //Fetch the props of the object
        $props = $ref->getProperties();

        if (in_array($value, $props)) {

        return $this->stdInstance->$value;
    } else {
        throw new \Exception('No prop in here...');
    }
}
 }
}

PS : I didn't test my code, just the general idea...

There is no portable way to get resolution of less than a second in standard C So best you can do is, use the POSIX function gettimeofday().

You have to use the right character encoding to accomplish this effect. You could try with •

Update

Just to clarify: use setText("\u2022 Bullet"); to add the bullet programmatically. 0x2022 = 8226

I believe the point here is that even if a collection is Unmodifiable, that does not ensure that it cannot change. Take for example a collection that evicts elements if they are too old. Unmodifiable just means that the object holding the reference cannot change it, not that it cannot change. A true example of this is Collections.unmodifiableList method. It returns an unmodifiable view of a List. The the List reference that was passed into this method is still modifiable and so the list can be modified by any holder of the reference that was passed. This can result in ConcurrentModificationExceptions and other bad things.

Immutable, mean that in no way can the collection be changed.

Second question: An Immutable collection does not mean that the objects contained in the collection will not change, just that collection will not change in the number and composition of objects that it holds. In other words, the collection's list of references will not change. That does not mean that the internals of the object being referenced cannot change.

You just have to ask for the legend once, outside of your loop.

For example, in this case I have 4 subplots, with the same lines, and a single legend.

from matplotlib.pyplot import *

ficheiros = ['120318.nc', '120319.nc', '120320.nc', '120321.nc']

fig = figure()
fig.suptitle('concentration profile analysis')

for a in range(len(ficheiros)):
    # dados is here defined
    level = dados.variables['level'][:]

    ax = fig.add_subplot(2,2,a+1)
    xticks(range(8), ['0h','3h','6h','9h','12h','15h','18h','21h']) 
    ax.set_xlabel('time (hours)')
    ax.set_ylabel('CONC ($\mu g. m^{-3}$)')

    for index in range(len(level)):
        conc = dados.variables['CONC'][4:12,index] * 1e9
        ax.plot(conc,label=str(level[index])+'m')

    dados.close()

ax.legend(bbox_to_anchor=(1.05, 0), loc='lower left', borderaxespad=0.)
         # it will place the legend on the outer right-hand side of the last axes

show()

Quick and dirty method to determine if Maven is using desired settings.xml would be invalidate its xml and run some safe maven command that requires settings.xml.

If it reads this settings.xml then Maven reports an error: "Error reading settings.xml..."

You edit an element's value by editing it's .value property.

document.getElementById('DATE').value = 'New Value';

To hide Page url .

use media="print" in style tage example :

<style type="text/css" media="print">
            @page {
                size: auto;   /* auto is the initial value */
                margin: 0;  /* this affects the margin in the printer settings */
            }
            @page { size: portrait; }
</style>

If you want to remove links :

@media print {
   a[href]:after {
      visibility: hidden !important;
   }
}

Create a file named "config.js" in ./src folder with this content:

module.exports = global.config = {
    i18n: {
        welcome: {
            en: "Welcome",
            fa: "??? ?????"
        }
        // rest of your translation object
    }
    // other global config variables you wish
};

In your main file "index.js" put this line:

import './config';

Everywhere you need your object use this:

global.config.i18n.welcome.en

If you know the number of levels in nested arrays you can simply do nested loops. Like so:

//  Scan through outer loop
foreach ($tmpArray as $innerArray) {
    //  Check type
    if (is_array($innerArray)){
        //  Scan through inner loop
        foreach ($innerArray as $value) {
            echo $value;
        }
    }else{
        // one, two, three
        echo $innerArray;
    }
}

if you do not know the depth of array you need to use recursion. See example below:

//  Multi-dementional Source Array
$tmpArray = array(
    array("one", array(1, 2, 3)),
    array("two", array(4, 5, 6)),
    array("three", array(
            7,
            8,
            array("four", 9, 10)
    ))
);

//  Output array
displayArrayRecursively($tmpArray);

/**
 * Recursive function to display members of array with indentation
 *
 * @param array $arr Array to process
 * @param string $indent indentation string
 */
function displayArrayRecursively($arr, $indent='') {
    if ($arr) {
        foreach ($arr as $value) {
            if (is_array($value)) {
                //
                displayArrayRecursively($value, $indent . '--');
            } else {
                //  Output
                echo "$indent $value \n";
            }
        }
    }
}

The code below with display only nested array with values for your specific case (3rd level only)

$tmpArray = array(
    array("one", array(1, 2, 3)),
    array("two", array(4, 5, 6)),
    array("three", array(7, 8, 9))
);

//  Scan through outer loop
foreach ($tmpArray as $inner) {

    //  Check type
    if (is_array($inner)) {
        //  Scan through inner loop
        foreach ($inner[1] as $value) {
           echo "$value \n";
        }
    }
}

From SourceTree, click on Tools->Options. Then on the "General" tab, make sure to check the box to allow SourceTree to modify your Git config files.

Then switch to the "Diff" tab. On the lower half, use the drop down to select the external program you want to use to do the diffs and merging. I've installed KDiff3 and like it well enough. When you're done, click OK.

Now when there is a merge, you can go under Actions->Resolve Conflicts->Launch External Merge Tool.

Small improvement to BrainSlugs83's excellent solution. Generalized to allow naming the output environment variable in the call.

@echo off
setlocal EnableDelayedExpansion

rem Example input value.
set RelativePath=doc\build

rem Resolve path.
call :ResolvePath AbsolutePath %RelativePath%

rem Output result.
echo %AbsolutePath%

rem End.
exit /b

rem === Functions ===

rem Resolve path to absolute.
rem Param 1: Name of output variable.
rem Param 2: Path to resolve.
rem Return: Resolved absolute path.
:ResolvePath
    set %1=%~dpfn2
    exit /b

If run from C:\project output is:

C:\project\doc\build

Your command is wrong.

Linux

java -- version

macOS

java -version

You can't use those commands other way around.

Check the node version using node -v. Check the npm version using npm -v. If these commands gave you version number you are good to go with NodeJs development

Time to test node

Create a Directory using mkdir NodeJs. Inside the NodeJs folder create a file using touch index.js. Open your index.js either using vi or in your favourite text editor. Type in console.log('Welcome to NodesJs.') and save it. Navigate back to your saved file and type node index.js. If you see Welcome to NodesJs. you did a nice job and you are up with NodeJs.

The preflight is being triggered by your Content-Type of application/json. The simplest way to prevent this is to set the Content-Type to be text/plain in your case. application/x-www-form-urlencoded & multipart/form-data Content-Types are also acceptable, but you'll of course need to format your request payload appropriately.

If you are still seeing a preflight after making this change, then Angular may be adding an X-header to the request as well.

Or you might have headers (Authorization, Cache-Control...) that will trigger it, see:

• https://developer.mozilla.org/en-US/docs/HTTP/Access_control_CORS#Preflighted_requests

Just a note: if you use arrow functions you don't need the const that = this part. It might look like this:

fetch('http://jsonplaceholder.typicode.com/posts') 
  .then((response) => { return response.json(); }) 
  .then((myJson) => { 
     this.setState({data: myJson}); // for example
});

Good news everyone, there's an isBetween function! Update your library ;)

http://momentjs.com/docs/#/query/is-between/

For Those who want to validate an Enum in their code you can following the guide

In Regex World you can use ^ for starting a string and $ to end it. Using them in combination with | could be what you want :

^(Male)$|^(Female)$

It will return true only for Male or Female case.

I have created the batch file and put it to the Cygwin's /bin directory. This script was developed so it allows to install/uninstall the registry entries for opening selected folders and drives in Cygwin. For details see the link http://with-love-from-siberia.blogspot.com/2013/12/cygwin-here.html.

update: This solution does the same as early suggestions but all manipulations with Windows Registry are hidden within the script.

Perform the command to install

cyghere.bat /install

Perform the command to uninstall

cyghere.bat /uninstall

Chaining max() and min() together is the normal idiom I've seen. If you find it hard to read, write a helper function to encapsulate the operation:

def clamp(minimum, x, maximum):
    return max(minimum, min(x, maximum))

To find length of an array A you should use the length property. It is as A.length, do not use A.length() its mainly used for size of string related objects.

The length property will always show the total allocated space to the array during initialization.

If you ever have any of these kind of problems the simple way is to run it. Happy Programming!

Maybe useful for anyone else running into this issue: When setting the port on the properties:

props.put("mail.smtp.port", smtpPort);

..make sure to use a string object. Using a numeric (ie Long) object will cause this statement to seemingly have no effect.

The name open addressing refers to the fact that the location ("address") of the element is not determined by its hash value. (This method is also called closed hashing).

In separate chaining, each bucket is independent, and has some sort of ADT (list, binary search trees, etc) of entries with the same index. In a good hash table, each bucket has zero or one entries, because we need operations of order O(1) for insert, search, etc.

This is a example of separate chaining using C++ with a simple hash function using mod operator (clearly, a bad hash function)

SELECT MAX(ID) from bugs WHERE user=Me

If you just need sampling without replacement:

>>> import random
>>> random.sample(range(1, 100), 3)
[77, 52, 45]

random.sample takes a population and a sample size k and returns k random members of the population.

If you have to control for the case where k is larger than len(population), you need to be prepared to catch a ValueError:

>>> try:
...   random.sample(range(1, 2), 3)
... except ValueError:
...   print('Sample size exceeded population size.')
... 
Sample size exceeded population size

PHP developers use this:

<?php
    header("Content-type: application/json");

    // Do something here...
?>

Use curly braces around the variable name:

`tail -1 ${filepath}_newstap.sh`

The Columns collection is only populated when AutoGenerateColumns=false, and you manually generate the columns yourself.

A nice work-around for this is to dynamically populate the Columns collection yourself, before setting the DataSource property and calling DataBind().

I have a function that manually adds the columns based on the contents of the DataTable that I want to display. Once I have done that (and then set the DataSource and called DataBind(), I can use the Columns collection and the Count value is correct, and I can turn the column visibility on and off as I initially wanted to.

static void AddColumnsToGridView(GridView gv, DataTable table)
{
    foreach (DataColumn column in table.Columns)
    {
        BoundField field = new BoundField();
        field.DataField = column.ColumnName;
        field.HeaderText = column.ColumnName;
        gv.Columns.Add(field);
    }
}

In your case, breaking the hash algorithm is equivalent to finding a collision in the hash algorithm. That means you don't need to find the password itself (which would be a preimage attack), you just need to find an output of the hash function that is equal to the hash of a valid password (thus "collision"). Finding a collision using a birthday attack takes O(2^(n/2)) time, where n is the output length of the hash function in bits.

SHA-2 has an output size of 512 bits, so finding a collision would take O(2^256) time. Given there are no clever attacks on the algorithm itself (currently none are known for the SHA-2 hash family) this is what it takes to break the algorithm.

To get a feeling for what 2^256 actually means: currently it is believed that the number of atoms in the (entire!!!) universe is roughly 10^80 which is roughly 2^266. Assuming 32 byte input (which is reasonable for your case - 20 bytes salt + 12 bytes password) my machine takes ~0,22s (~2^-2s) for 65536 (=2^16) computations. So 2^256 computations would be done in 2^240 * 2^16 computations which would take

2^240 * 2^-2 = 2^238 ~ 10^72s ~ 3,17 * 10^64 years

Even calling this millions of years is ridiculous. And it doesn't get much better with the fastest hardware on the planet computing thousands of hashes in parallel. No human technology will be able to crunch this number into something acceptable.

So forget brute-forcing SHA-256 here. Your next question was about dictionary words. To retrieve such weak passwords rainbow tables were used traditionally. A rainbow table is generally just a table of precomputed hash values, the idea is if you were able to precompute and store every possible hash along with its input, then it would take you O(1) to look up a given hash and retrieve a valid preimage for it. Of course this is not possible in practice since there's no storage device that could store such enormous amounts of data. This dilemma is known as memory-time tradeoff. As you are only able to store so many values typical rainbow tables include some form of hash chaining with intermediary reduction functions (this is explained in detail in the Wikipedia article) to save on space by giving up a bit of savings in time.

Salts were a countermeasure to make such rainbow tables infeasible. To discourage attackers from precomputing a table for a specific salt it is recommended to apply per-user salt values. However, since users do not use secure, completely random passwords, it is still surprising how successful you can get if the salt is known and you just iterate over a large dictionary of common passwords in a simple trial and error scheme. The relationship between natural language and randomness is expressed as entropy. Typical password choices are generally of low entropy, whereas completely random values would contain a maximum of entropy.

The low entropy of typical passwords makes it possible that there is a relatively high chance of one of your users using a password from a relatively small database of common passwords. If you google for them, you will end up finding torrent links for such password databases, often in the gigabyte size category. Being successful with such a tool is usually in the range of minutes to days if the attacker is not restricted in any way.

That's why generally hashing and salting alone is not enough, you need to install other safety mechanisms as well. You should use an artificially slowed down entropy-enducing method such as PBKDF2 described in PKCS#5 and you should enforce a waiting period for a given user before they may retry entering their password. A good scheme is to start with 0.5s and then doubling that time for each failed attempt. In most cases users don't notice this and don't fail much more often than three times on average. But it will significantly slow down any malicious outsider trying to attack your application.

Here is an immutable (does not modify the inputs) version of @Salakar's answer. Useful if you're doing functional programming type stuff.

export function isObject(item) {
  return (item && typeof item === 'object' && !Array.isArray(item));
}

export default function mergeDeep(target, source) {
  let output = Object.assign({}, target);
  if (isObject(target) && isObject(source)) {
    Object.keys(source).forEach(key => {
      if (isObject(source[key])) {
        if (!(key in target))
          Object.assign(output, { [key]: source[key] });
        else
          output[key] = mergeDeep(target[key], source[key]);
      } else {
        Object.assign(output, { [key]: source[key] });
      }
    });
  }
  return output;
}

Additional note: there is big difference between Debug assembler output and Release one. The first one is good to learn how compiler produces assembler code from C++. The second one is good to learn how compiler optimizes various C++ constructs. In this case some C++-to-asm transformations are not obvious.

You can try this, but second dimension values will be equals to indexes:

$array = array_fill_keys(range(0,5), range(0,5));

a little more complicated for empty array:

$array = array_fill_keys(range(0, 5), array_fill_keys(range(0, 5), null));

Your code is perfectly fine, you are just not looking at the right location to find your file. Since you haven't provided absolute path, your file will be created relative to the current working folder (more precisely in the current working folder in your case).

Your current working folder is set by Qt Creator. Go to Projects >> Your selected build >> Press the 'Run' button (next to 'Build) and you will see what it is on this page which of course you can change as well.

phpMyAdmin includes a neat find-and-replace tool.

Select the table, then hit Search > Find and replace

This query took about a minute and successfully replaced several thousand instances of oldurl.ext with the newurl.ext within Column post_content

Best thing about this method : You get to check every match before committing.

N.B. I am using phpMyAdmin 4.9.0.1

To prevent inserting a record that exist already. I'd check if the ID value exists in the database. For the example of a Table created with an IDENTITY PRIMARY KEY:

CREATE TABLE [dbo].[Persons] (    
    ID INT IDENTITY(1,1) PRIMARY KEY,
    LastName VARCHAR(40) NOT NULL,
    FirstName VARCHAR(40)
);

When JANE DOE and JOE BROWN already exist in the database.

SET IDENTITY_INSERT [dbo].[Persons] OFF;
INSERT INTO [dbo].[Persons] (FirstName,LastName)
VALUES ('JANE','DOE'); 
INSERT INTO Persons (FirstName,LastName) 
VALUES ('JOE','BROWN');

DATABASE OUTPUT of TABLE [dbo].[Persons] will be:

ID    LastName   FirstName
1     DOE        Jane
2     BROWN      JOE

I'd check if i should update an existing record or insert a new one. As the following JAVA example:

int NewID = 1;
boolean IdAlreadyExist = false;
// Using SQL database connection
// STEP 1: Set property
System.setProperty("java.net.preferIPv4Stack", "true");
// STEP 2: Register JDBC driver
Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
// STEP 3: Open a connection
try (Connection conn1 = DriverManager.getConnection(DB_URL, USER,pwd) {
    conn1.setAutoCommit(true);
    String Select = "select * from Persons where  ID = " + ID;
    Statement st1 = conn1.createStatement();
    ResultSet rs1 = st1.executeQuery(Select);
    // iterate through the java resultset
    while (rs1.next()) {
        int ID = rs1.getInt("ID");
        if (NewID==ID) {
            IdAlreadyExist = true;
        }

    }
    conn1.close();
} catch (SQLException e1) {
    System.out.println(e1);
}
if (IdAlreadyExist==false) {
    //Insert new record code here
} else {
    //Update existing record code here
}

Serialize both objects, then calculate Hash Code, then compare.

The typical solution to this is to write your own function to clone an object. If you are able to provide copy constructors and copy assignement operators, this may be as far as you need to go.

class Foo
{ 
public:
  Foo();
  Foo(const Foo& rhs) { /* copy construction from rhs*/ }
  Foo& operator=(const Foo& rhs) {};
};

// ...

Foo orig;
Foo copy = orig;  // clones orig if implemented correctly

Sometimes it is beneficial to provide an explicit clone() method, especially for polymorphic classes.

class Interface
{
public:
  virtual Interface* clone() const = 0;
};

class Foo : public Interface
{
public:
  Interface* clone() const { return new Foo(*this); }
};

class Bar : public Interface
{
public:
  Interface* clone() const { return new Bar(*this); }
};


Interface* my_foo = /* somehow construct either a Foo or a Bar */;
Interface* copy = my_foo->clone();

EDIT: Since Stack has no member variables, there's nothing to do in the copy constructor or copy assignment operator to initialize Stack's members from the so-called "right hand side" (rhs). However, you still need to ensure that any base classes are given the opportunity to initialize their members.

You do this by calling the base class:

Stack(const Stack& rhs) 
: List(rhs)  // calls copy ctor of List class
{
}

Stack& operator=(const Stack& rhs) 
{
  List::operator=(rhs);
  return * this;
};

You can copy your .classpath and .project files to the root of the new project directory and then choose 'Import...' from the file menu, and select 'General/Existing Projects into Workspace.' In the resulting dialog, locate the root of the new project directory and finish. Make sure that you have deleted the old project from the work space before importing.

In Java, the concatenation symbol is "+", not ".".

For anyone who stumbles upon this years later (like I did), I tweaked 6502's methods a little bit to allow the progress bar to decrease as well as increase. Useful in slightly more cases. Thanks 6502 for a great tool!

Basically, the only difference is that the whole line of #s and -s is written each time progress(x) is called, and the cursor is always returned to the start of the bar.

def startprogress(title):
    """Creates a progress bar 40 chars long on the console
    and moves cursor back to beginning with BS character"""
    global progress_x
    sys.stdout.write(title + ": [" + "-" * 40 + "]" + chr(8) * 41)
    sys.stdout.flush()
    progress_x = 0


def progress(x):
    """Sets progress bar to a certain percentage x.
    Progress is given as whole percentage, i.e. 50% done
    is given by x = 50"""
    global progress_x
    x = int(x * 40 // 100)                      
    sys.stdout.write("#" * x + "-" * (40 - x) + "]" + chr(8) * 41)
    sys.stdout.flush()
    progress_x = x


def endprogress():
    """End of progress bar;
    Write full bar, then move to next line"""
    sys.stdout.write("#" * 40 + "]\n")
    sys.stdout.flush()

I would suggest something like:

$text =~ m{(.*)$find(.*)};
$text = $1 . $replace . $2;

It is quite readable and seems to be safe. If multiple replace is needed, it is easy:

while ($text =~ m{(.*)$find(.*)}){
     $text = $1 . $replace . $2;
}

Google has ended support for eclipse plugin. If you prefer to use eclipse still you can download Eclipse Android Development Tool from

ADT for Eclipse

    Arrays.sort(arr);
    int max=0,mode=0,count=0;
    for(int i=0;i<N;i=i+count) {
        count = 1;
        for(int j=i+1; j<N; j++) {
            if(arr[i] == arr[j])
                count++;
        }
        if(count>max) {
            max=count;
            mode = arr[i];
        }
    }

In my case (using MS Visual Studio), it was as simple as restarting Visual Studio.

<div style='width:200px;margin:0 auto;> sometext or image tag</div>

this works horizontally

I was also having the same problem So I just removed the JDK path from the end and put it in start even before all System or Windows 32 paths.

Before it was like this:

C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Users\Rajkaran\AppData\Local\Smartbar\Application\;C:\Users\Rajkaran\AppData\Local\Smartbar\Application\;C:\Program Files\doxygen\bin;%JAVA_HOME%\bin;%ANT_HOME%\bin

So I made it like this:

%JAVA_HOME%\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Users\Rajkaran\AppData\Local\Smartbar\Application\;C:\Users\Rajkaran\AppData\Local\Smartbar\Application\;C:\Program Files\doxygen\bin;%ANT_HOME%\bin

run cmd

Enter wmic baseboard get product,version,serialnumber

Press the enter key. The result you see under serial number column is your motherboard serial number

For those looking for a way to do this with $object->method:

call_user_func_array(array($object, 'method_name'), $array);

I was successful with this in a construct function that calls a variable method_name with variable parameters.

Just create the database using createdb CLI tool:

PGHOST="my.database.domain.com"
PGUSER="postgres"
PGDB="mydb"
createdb -h $PGHOST -p $PGPORT -U $PGUSER $PGDB

If the database exists, it will return an error:

createdb: database creation failed: ERROR:  database "mydb" already exists

try with screen -d -r or screen -D -RR

Use subprocess.check_output (new in python 2.7). It will suppress stdout and raise an exception if the command fails. (It actually returns the contents of stdout, so you can use that later in your program if you want.) Example:

import subprocess
try:
    subprocess.check_output(['espeak', text])
except subprocess.CalledProcessError:
    # Do something

You can also suppress stderr with:

    subprocess.check_output(["espeak", text], stderr=subprocess.STDOUT)

For earlier than 2.7, use

import os
import subprocess
with open(os.devnull, 'w')  as FNULL:
    try:
        subprocess._check_call(['espeak', text], stdout=FNULL)
    except subprocess.CalledProcessError:
        # Do something

Here, you can suppress stderr with

        subprocess._check_call(['espeak', text], stdout=FNULL, stderr=FNULL)

Main difference between JPA and JDBC is level of abstraction.

JDBC is a low level standard for interaction with databases. JPA is higher level standard for the same purpose. JPA allows you to use an object model in your application which can make your life much easier. JDBC allows you to do more things with the Database directly, but it requires more attention. Some tasks can not be solved efficiently using JPA, but may be solved more efficiently with JDBC.

Got the same problem, found the following bug report in SQL Server 2012 If still relevant see conditions that cause the issue - there are some workarounds there as well (didn't try though). Failover or Restart Results in Reseed of Identity

If you're on Windows:

Go to your php.ini file and remove the ; mark from the beginning of the following line:

;extension=php_curl.dll

After you have saved the file you must restart your HTTP server software (e.g. Apache) before this can take effect.

For Ubuntu 13.0 and above, simply use the debundled package. In a terminal type the following to install it and do not forgot to restart server.

sudo apt-get install php-curl

Or if you're using the old PHP5

sudo apt-get install php5-curl

or

sudo apt-get install php5.6-curl

Then restart apache to activate the package with

sudo service apache2 restart

You do not want the '='

Use .libPaths("C:/R/library") in you Rprofile.site file

And make sure you have correct " symbol (Shift-2)

This will navigate to the previously visited URL.

javascript:history.go(-1)

I've just been struggling with MSVC2005 to use the std::string(char*) constructor just like the top-rated answer. As I see this variant listed as #4 on always-trusted http://en.cppreference.com/w/cpp/string/basic_string/basic_string , I figure even an old compiler offers this.

It has taken me so long to realize that this constructor absolute refuses to match with (unsigned char*) as an argument ! I got these incomprehensible error messages about failure to match with std::string argument type, which was definitely not what I was aiming for. Just casting the argument with std::string((char*)ucharPtr) solved my problem... duh !

The stroke doubles up on the middel sections, I used this layer list drawable:

<layer-list xmlns:android="http://schemas.android.com/apk/res/android" >

 <item android:top="0dp" android:left="0dp" android:bottom="0dp" android:right="0dp">

     <shape xmlns:android="http://schemas.android.com/apk/res/android" android:shape="rectangle">
       <solid android:color="@color/grey" />
    </shape>
</item>

<item android:top="1dp" android:left="1dp" android:bottom="1dp" android:right="1dp">

    <shape xmlns:android="http://schemas.android.com/apk/res/android" android:shape="rectangle">
      <solid android:color="@color/lightgrey" />
    </shape>
 </item>
</layer-list>

You are referring to the type rather than the instance. Make 'Model' lowercase in the example in your second and fourth code samples.

Model.GetHtmlAttributes

should be

model.GetHtmlAttributes

To download file on flask call. File name is Examples.pdf When I am hitting 127.0.0.1:5000/download it should get download.

Example:

from flask import Flask
from flask import send_file
app = Flask(__name__)

@app.route('/download')
def downloadFile ():
    #For windows you need to use drive name [ex: F:/Example.pdf]
    path = "/Examples.pdf"
    return send_file(path, as_attachment=True)

if __name__ == '__main__':
    app.run(port=5000,debug=True) 

There's a Json library at Codeplex

Join on one-to-many relation in JPQL looks as follows:

select b.fname, b.lname from Users b JOIN b.groups c where c.groupName = :groupName 

When several properties are specified in select clause, result is returned as Object[]:

Object[] temp = (Object[]) em.createNamedQuery("...")
    .setParameter("groupName", groupName)
    .getSingleResult(); 
String fname = (String) temp[0];
String lname = (String) temp[1];

By the way, why your entities are named in plural form, it's confusing. If you want to have table names in plural, you may use @Table to specify the table name for the entity explicitly, so it doesn't interfere with reserved words:

@Entity @Table(name = "Users")     
public class User implements Serializable { ... } 

Your struct can have methods and properties... why not try

public struct MyStruct { 
    public string s;
    public int length { return s.Length; }
}

Correction @Guffa's answer shows that it is possible... more info here: http://www.codeproject.com/KB/cs/Csharp_implicit_operator.aspx

General benefits of functional programming over imperative languages:

You can formulate many problems much easier, closer to their definition and more concise in a functional programming language like F# and your code is less error-prone (immutability, more powerful type system, intuitive recurive algorithms). You can code what you mean instead of what the computer wants you to say ;-) You will find many discussions like this when you google it or even search for it at SO.

Special F#-advantages:

• Asynchronous programming is extremely easy and intuitive with async {}-expressions - Even with ParallelFX, the corresponding C#-code is much bigger

• Very easy integration of compiler compilers and domain-specific languages

• Extending the language as you need it: LOP

• Units of measure

• More flexible syntax

• Often shorter and more elegant solutions

Take a look at this document

The advantages of C# are that it's often more accurate to "imperative"-applications (User-interface, imperative algorithms) than a functional programming language, that the .NET-Framework it uses is designed imperatively and that it's more widespread.

Furthermore you can have F# and C# together in one solution, so you can combine the benefits of both languages and use them where they're needed.

Here are the examples of Filter, map and reduce functions.

numbers = [10,11,12,22,34,43,54,34,67,87,88,98,99,87,44,66]

//Filter

oddNumbers = list(filter(lambda x: x%2 != 0, numbers))

print(oddNumbers)

//Map

multiplyOf2 = list(map(lambda x: x*2, numbers))

print(multiplyOf2)

//Reduce

The reduce function, since it is not commonly used, was removed from the built-in functions in Python 3. It is still available in the functools module, so you can do:

from functools import reduce

sumOfNumbers = reduce(lambda x,y: x+y, numbers)

print(sumOfNumbers)

From this page

The most common use of POST, by far, is to submit HTML form data to CGI scripts. In this case, the Content-Type: header is usually application/x-www-form-urlencoded, and the Content-Length: header gives the length of the URL-encoded form data (here's a note on URL-encoding). The CGI script receives the message body through STDIN, and decodes it. Here's a typical form submission, using POST:

POST /path/script.cgi HTTP/1.0
From: [email protected]
User-Agent: HTTPTool/1.0
Content-Type: application/x-www-form-urlencoded
Content-Length: 32

(It's been a while since I did this stuff. Please don't blindly assume that all the details below are correct. But I hope I'm not too embarrassingly wrong. :))

As the previous answer stated, the Minecraft client (as of 1.3.1) supports SRV record lookup using the service name _minecraft and the protocol name _tcp, which means that if your zone file looks like this...

arboristal.com.                 86400 IN A   <your IP address>
_minecraft._tcp.arboristal.com. 86400 IN SRV 10 20 25565 arboristal.com.
_minecraft._tcp.arboristal.com. 86400 IN SRV 10 40 25566 arboristal.com.
_minecraft._tcp.arboristal.com. 86400 IN SRV 10 40 25567 arboristal.com.

...then Minecraft clients who perform SRV record lookup as hinted in the changelog will use ports 25566 and 25567 with preference (40% of the time each) over port 25565 (20% of the time). We can assume that Minecraft clients who do not find and respect these SRV records will use port 25565 as usual.

However, I would argue that it would actually be more "clean and professional" to do it using a load balancer such as Nginx. (I pick Nginx just because I've used it before. I'm not claiming it's uniquely suited to this task. It might even be a bad choice for some reason.) Then you don't have to mess with your DNS, and you can use the same approach to load-balance any service, not just ones like Minecraft which happen to have done the hard client-side work to look up and respect SRV records. To do it the Nginx way, you'd run Nginx on the arboristal.com machine with something like the following in /etc/nginx/sites-enabled/arboristal.com:

upstream minecraft_servers {
    ip_hash;
    server 127.0.0.1:25566 weight=1;
    server 127.0.0.1:25567 weight=1;
    server 127.0.0.1:25568 weight=1;
}
server {
    listen 25565;
    proxy_pass minecraft_servers;
}

Here we are controlling the load-balancing ourselves on the server side (via Nginx), so we no longer need to worry that badly behaved clients might prefer port 25565 to the other two ports. In fact, now all clients will talk to arboristal.com:25565! But the listener on that port is no longer a Minecraft server; it's Nginx, secretly proxying all the traffic onto three other ports on the same machine.

We load-balance based on a hash of the client's IP address (ip_hash), so that if a client disconnects and then reconnects later, there's a good chance that it'll get reconnected to the same Minecraft server it had before. (I don't know how much this matters to Minecraft, or how SRV-enabled clients are programmed to deal with this aspect.)

Notice that we used to run a Minecraft server on port 25565; I've moved it to port 25568 so that we can use port 25565 for the load-balancer.

A possible disadvantage of the Nginx method is that it makes Nginx a bottleneck in your system. If Nginx goes down, then all three servers become unreachable. If some part of your system can't keep up with the volume of traffic on that single port, 25565, all three servers become flaky. And not to mention, Nginx is a big new dependency in your ecosystem. Maybe you don't want to introduce yet another massive piece of software with a complicated config language and a huge attack surface. I can respect that.

A possible advantage of the Nginx method is... that it makes Nginx a bottleneck in your system! You can apply global policies via Nginx, such as rejecting packets above a certain size, or responding with a static web page to HTTP connections on port 80. You can also firewall off ports 25566, 25567, and 25568 from the Internet, since now they should be talked to only by Nginx over the loopback interface. This reduces your attack surface somewhat.

Nginx also makes it easier to add new Minecraft servers to your backend; now you can just add a server line to your config and service nginx reload. Using the old port-based approach, you'd have to add a new SRV record with your DNS provider (and it could take up to 86400 seconds for clients to notice the change) and then also remember to edit your firewall (e.g. /etc/iptables.rules) to permit external traffic over that new port.

Nginx also frees you from having to think about DNS TTLs when making ops changes. Suppose you decide to split up your three Minecraft servers onto three different physical machines with different IP addresses. Using Nginx, you can do that completely via config changes to your server lines, and you can keep those new machines inside your firewall (connected only to Nginx over a private interface), and the changes will take effect immediately, by definition. Whereas, using SRV records, you'll have to rewrite your zone file to something like this...

arboristal.com.                 86400 IN CNAME mc1.arboristal.com.
mc1.arboristal.com.             86400 IN A   <a new machine's IP address>
mc2.arboristal.com.             86400 IN A   <a new machine's IP address>
mc3.arboristal.com.             86400 IN A   <a new machine's IP address>
_minecraft._tcp.arboristal.com. 86400 IN SRV 10 20 25565 mc1.arboristal.com.
_minecraft._tcp.arboristal.com. 86400 IN SRV 10 40 25565 mc2.arboristal.com.
_minecraft._tcp.arboristal.com. 86400 IN SRV 10 40 25565 mc3.arboristal.com.

...and you'll have to leave all three new machines poking outside your firewall so that they can receive connections from the Internet. And you'll have to wait up to 86400 seconds for your clients to notice the change, which could affect the complexity of your rollout plan. And if you were running any other services (such as an HTTP server) on arboristal.com, now you have to move them to the mc1.arboristal.com machine because of how I did that CNAME. I did that only for the benefit of those hypothetical Minecraft clients who don't respect SRV records and will still be trying to connect to arboristal.com:25565.

So, I think both ways (SRV records and Nginx load-balancing) are reasonable, and your choice will depend on your personal preferences. I caricature the options as:

• SRV records: "I just need it to work. I don't want complexity. And I know and trust my DNS provider."
• Nginx: "I foresee arboristal.com taking over the world, or at least moving to a bigger machine someday. I'm not scared of learning a new tool. What's a zone file?"

Now this may include more than you need (and may not even work for command line applications in a non-graphical environment, I don't know), but there is nw.js. It's Blink (i.e. Chromium/Webkit) + io.js (i.e. Node.js).

You can use node-webkit-builder to build native executable binaries for Linux, OS X and Windows.

If you want a GUI, that's a huge plus. You can build one with web technologies. If you don't, specify "node-main" in the package.json (and probably "window": {"show": false} although maybe it works to just have a node-main and not a main)

I haven't tried to use it in exactly this way, just throwing it out there as a possibility. I can say it's certainly not an ideal solution for non-graphical Node.js applications.

There is a better way to do this:

If the array $arr_options contains the existing array.

$arr_new_input['name'] = [
    'type' => 'text', 
    'label' => 'First name', 
    'show' => true, 
    'required' => true
];

$arr_options += $arr_new_input;

Warning: $arr_options must exist. if $arr_options already has a ['name'] it wil be overwritten.

Hope this helps.

In your Android Developer Tools , From the SDK Manager, install Extras > Google Cloud Messaging for Android Library . After the installation is complete restart your SDK.Then navigate to sdk\extras\google\gcm\gcm-client\dist . there will be your gcm.jar file.

this is another simple way to do it .

Name.objects.exclude(alias=None)

Try This

<script>
  var phpadd= <?php echo add(1,2);?> //call the php add function
  var phpmult= <?php echo mult(1,2);?> //call the php mult function
  var phpdivide= <?php echo divide(1,2);?> //call the php divide function
</script>

This doesn't require jQuery. The JavaScript Math.random function returns a random number between 0 and 1, so if you want a number between 1 and 6, you can do:

var number = 1 + Math.floor(Math.random() * 6);

Update: (as per comment) If you want to display a random number that changes every so often, you can use setInterval to create a timer:

setInterval(function() {
  var number = 1 + Math.floor(Math.random() * 6);
  $('#my_div').text(number);
},
1000); // every 1 second

You can also use PDCurses library. (http://pdcurses.sourceforge.net/)

I extended Selenium WebDriver implementation, in my case HtmlUnitDriver to expose a method

public boolean isElementPresent(By by){}

like this:

1. check if page is loaded within a timeout period.
2. Once page is loaded, I lower the implicitly wait time of the WebDriver to some milliseconds, in my case 100 mills, probably should work with 0 mills too.
3. call findElements(By), the WebDriver even if will not find the element will wait only the amount of time from above.
4. rise back the implicitly wait time for future page loading

Here is my code:

import java.util.concurrent.TimeUnit;
import org.openqa.selenium.By;
import org.openqa.selenium.JavascriptExecutor;
import org.openqa.selenium.WebDriver;
import org.openqa.selenium.htmlunit.HtmlUnitDriver;
import org.openqa.selenium.support.ui.ExpectedCondition;
import org.openqa.selenium.support.ui.WebDriverWait;

public class CustomHtmlUnitDriver extends HtmlUnitDriver {

    public static final long DEFAULT_TIMEOUT_SECONDS = 30;
    private long timeout = DEFAULT_TIMEOUT_SECONDS;

    public long getTimeout() {
        return timeout;
    }
    public void setTimeout(long timeout) {
        this.timeout = timeout;
    }

    public boolean isElementPresent(By by) {
        boolean isPresent = true;
        waitForLoad();
        //search for elements and check if list is empty
        if (this.findElements(by).isEmpty()) {
            isPresent = false;
        }
        //rise back implicitly wait time
        this.manage().timeouts().implicitlyWait(timeout, TimeUnit.SECONDS);
        return isPresent;
    }

    public void waitForLoad() {
        ExpectedCondition<Boolean> pageLoadCondition = new ExpectedCondition<Boolean>() {
            public Boolean apply(WebDriver wd) {
                //this will tel if page is loaded
                return "complete".equals(((JavascriptExecutor) wd).executeScript("return document.readyState"));
            }
        };
        WebDriverWait wait = new WebDriverWait(this, timeout);
        //wait for page complete
        wait.until(pageLoadCondition);
        //lower implicitly wait time
        this.manage().timeouts().implicitlyWait(100, TimeUnit.MILLISECONDS);
    }   
}

Usage:

CustomHtmlUnitDriver wd = new CustomHtmlUnitDriver();
wd.get("http://example.org");
if (wd.isElementPresent(By.id("Accept"))) {
    wd.findElement(By.id("Accept")).click();
}
else {
    System.out.println("Accept button not found on page");
}

A little mathematical logic theory here:

"NOT a AND NOT b" is the same as "NOT (a OR b)", so:

"a NOT -1 AND b NOT -1" is equivalent of "NOT (a is -1 OR b is -1)", which is opposite (Complement) of "(a is -1 OR b is -1)".

So if you want exact opposite result, df1 and df2 should be as below:

df1 = df[(df.a != -1) & (df.b != -1)]
df2 = df[(df.a == -1) | (df.b == -1)]

Try this !!!!

For TouchedDown Event set One color and for TouchUpInside set the other.

- (IBAction)touchedDown:(id)sender {
    NSLog(@"Touched Down");
    btn1.backgroundColor=[UIColor redColor];
}

- (IBAction)touchUpInside:(id)sender {
    NSLog(@"TouchUpInside");
    btn1.backgroundColor=[UIColor whiteColor];    
}

This method works on Mac OS X v10.7.5 (Lion):

find . | grep FooBar | xargs -I{} cp {} ~/foo/bar

I also tested the exact syntax you posted. That also worked fine on 10.7.5.

change the input boxes like

<input type="checkbox" name="c1" onclick="showMe('div1')">Show Hide Checkbox
<input type="checkbox" name="c1" onclick="showMe('div1')">Show Hide Checkbox
<input type="checkbox" name="c1" onclick="showMe('div1')">Show Hide Checkbox
<input type="checkbox" name="c1" onclick="showMe('div1')">Show Hide Checkbox

and js code as

function showMe (box) {

    var chboxs = document.getElementsByName("c1");
    var vis = "none";
    for(var i=0;i<chboxs.length;i++) { 
        if(chboxs[i].checked){
         vis = "block";
            break;
        }
    }
    document.getElementById(box).style.display = vis;


}

here is a demo fiddle

The difference is the amount of memory allocated to each integer, and how large a number they each can store.

hduser@marta-komputer:/usr/local/hadoop$ jps

11696 ResourceManager

11842 NodeManager

11171 NameNode

11523 SecondaryNameNode

12167 Jps

Where is your DataNode? Connection refused problem might also be due to no active DataNode. Check datanode logs for issues.

UPDATED:

For this error:

15/03/01 00:59:34 INFO client.RMProxy: Connecting to ResourceManager at /0.0.0.0:8032 java.net.ConnectException: Call From marta-komputer.home/192.168.1.8 to marta-komputer:9000 failed on connection exception: java.net.ConnectException: Connection refused; For more details see: http://wiki.apache.org/hadoop/ConnectionRefused

Add these lines in yarn-site.xml:

<property>
<name>yarn.resourcemanager.address</name>
<value>192.168.1.8:8032</value>
</property>
<property>
<name>yarn.resourcemanager.scheduler.address</name>
<value>192.168.1.8:8030</value>
</property>
<property>
<name>yarn.resourcemanager.resource-tracker.address</name>
<value>192.168.1.8:8031</value>
</property>

Restart the hadoop processes.

If you want an index, you can use std::find in combination with std::distance.

auto it = std::find(Names.begin(), Names.end(), old_name_);
if (it == Names.end())
{
  // name not in vector
} else
{
  auto index = std::distance(Names.begin(), it);
}

A pop-up is a child of the parent window, but it is not a child of the parent DOCUMENT. It is its own independent browser window and is not contained by the parent.

Use an absolutely-positioned DIV and a translucent overlay instead.

EDIT - example

You need jQuery for this:

<style>
html, body {
    height:100%
}


#overlay { 
    position:absolute;
    z-index:10;
    width:100%;
    height:100%;
    top:0;
    left:0;
    background-color:#f00;
    filter:alpha(opacity=10);
    -moz-opacity:0.1;
    opacity:0.1;
    cursor:pointer;

} 

.dialog {
    position:absolute;
    border:2px solid #3366CC;
    width:250px;
    height:120px;
    background-color:#ffffff;
    z-index:12;
}

</style>
<script type="text/javascript">
$(document).ready(function() { init() })

function init() {
    $('#overlay').click(function() { closeDialog(); })
}

function openDialog(element) {
    //this is the general dialog handler.
    //pass the element name and this will copy
    //the contents of the element to the dialog box

    $('#overlay').css('height', $(document.body).height() + 'px')
    $('#overlay').show()
    $('#dialog').html($(element).html())
    centerMe('#dialog')
    $('#dialog').show();
}

function closeDialog() {
    $('#overlay').hide();
    $('#dialog').hide().html('');
}

function centerMe(element) {
    //pass element name to be centered on screen
    var pWidth = $(window).width();
    var pTop = $(window).scrollTop()
    var eWidth = $(element).width()
    var height = $(element).height()
    $(element).css('top', '130px')
    //$(element).css('top',pTop+100+'px')
    $(element).css('left', parseInt((pWidth / 2) - (eWidth / 2)) + 'px')
}


</script>


<a href="javascript:;//close me" onclick="openDialog($('#content'))">show dialog A</a>

<a href="javascript:;//close me" onclick="openDialog($('#contentB'))">show dialog B</a>

<div id="dialog" class="dialog" style="display:none"></div>
<div id="overlay" style="display:none"></div>
<div id="content" style="display:none">
    Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin nisl felis, placerat in sollicitudin quis, hendrerit vitae diam. Nunc ornare iaculis urna. 
</div>

<div id="contentB" style="display:none">
    Moooo mooo moo moo moo!!! 
</div>

On Python 3.4, the pathlib module was added, and the following code will reliably open a file in the same directory as the current script:

from pathlib import Path

p = Path(__file__).with_name('file.txt')
with p.open('r') as f:
    print(f.read())

You can also use parent.absolute() to get directory value as a string if needed:

p = Path(__file__)
dir_abs = p.parent.absolute()  # Will return the executable directory absolute path

Instance variable is the variable declared inside a class, but outside a method: something like:

class IronMan {

    /** These are all instance variables **/
    public String realName;
    public String[] superPowers;
    public int age;

    /** Getters and setters here **/
}

Now this IronMan Class can be instantiated in another class to use these variables. Something like:

class Avengers {

    public static void main(String[] a) {
        IronMan ironman = new IronMan();
        ironman.realName = "Tony Stark";
        // or
        ironman.setAge(30);
    }

}

This is how we use the instance variables. Shameless plug: This example was pulled from this free e-book here here.

Apache Commons has an IntegerValidator class which appears to do what you want. Java provides no in-built method for doing this.

See here for the groupid/artifactid.

To call GET,POST,DELETE,PUT All kind of request, i have created one common function

function CallAPI($method, $api, $data) {
    $url = "http://localhost:82/slimdemo/RESTAPI/" . $api;
    $curl = curl_init($url);
    curl_setopt($curl, CURLOPT_RETURNTRANSFER, true);

    switch ($method) {
        case "GET":
            curl_setopt($curl, CURLOPT_POSTFIELDS, json_encode($data));
            curl_setopt($curl, CURLOPT_CUSTOMREQUEST, "GET");
            break;
        case "POST":
            curl_setopt($curl, CURLOPT_POSTFIELDS, json_encode($data));
            curl_setopt($curl, CURLOPT_CUSTOMREQUEST, "POST");
            break;
        case "PUT":
            curl_setopt($curl, CURLOPT_POSTFIELDS, json_encode($data));
            curl_setopt($curl, CURLOPT_CUSTOMREQUEST, "PUT");
            break;
        case "DELETE":
            curl_setopt($curl, CURLOPT_CUSTOMREQUEST, "DELETE"); 
            curl_setopt($curl, CURLOPT_POSTFIELDS, json_encode($data));
            break;
    }
    $response = curl_exec($curl);
    $data = json_decode($response);

    /* Check for 404 (file not found). */
    $httpCode = curl_getinfo($curl, CURLINFO_HTTP_CODE);
    // Check the HTTP Status code
    switch ($httpCode) {
        case 200:
            $error_status = "200: Success";
            return ($data);
            break;
        case 404:
            $error_status = "404: API Not found";
            break;
        case 500:
            $error_status = "500: servers replied with an error.";
            break;
        case 502:
            $error_status = "502: servers may be down or being upgraded. Hopefully they'll be OK soon!";
            break;
        case 503:
            $error_status = "503: service unavailable. Hopefully they'll be OK soon!";
            break;
        default:
            $error_status = "Undocumented error: " . $httpCode . " : " . curl_error($curl);
            break;
    }
    curl_close($curl);
    echo $error_status;
    die;
}

CALL Delete Method

$data = array('id'=>$_GET['did']);
$result = CallAPI('DELETE', "DeleteCategory", $data);

CALL Post Method

$data = array('title'=>$_POST['txtcategory'],'description'=>$_POST['txtdesc']);
$result = CallAPI('POST', "InsertCategory", $data);

CALL Get Method

$data = array('id'=>$_GET['eid']);
$result = CallAPI('GET', "GetCategoryById", $data);

CALL Put Method

$data = array('id'=>$_REQUEST['eid'],m'title'=>$_REQUEST['txtcategory'],'description'=>$_REQUEST['txtdesc']);
$result = CallAPI('POST', "UpdateCategory", $data);

Here are the possible ways to take a unique pointer as an argument, as well as their associated meaning.

(A) By Value

Base(std::unique_ptr<Base> n)
  : next(std::move(n)) {}

In order for the user to call this, they must do one of the following:

Base newBase(std::move(nextBase));
Base fromTemp(std::unique_ptr<Base>(new Base(...));

To take a unique pointer by value means that you are transferring ownership of the pointer to the function/object/etc in question. After newBase is constructed, nextBase is guaranteed to be empty. You don't own the object, and you don't even have a pointer to it anymore. It's gone.

This is ensured because we take the parameter by value. std::move doesn't actually move anything; it's just a fancy cast. std::move(nextBase) returns a Base&& that is an r-value reference to nextBase. That's all it does.

Because Base::Base(std::unique_ptr<Base> n) takes its argument by value rather than by r-value reference, C++ will automatically construct a temporary for us. It creates a std::unique_ptr<Base> from the Base&& that we gave the function via std::move(nextBase). It is the construction of this temporary that actually moves the value from nextBase into the function argument n.

(B) By non-const l-value reference

Base(std::unique_ptr<Base> &n)
  : next(std::move(n)) {}

This has to be called on an actual l-value (a named variable). It cannot be called with a temporary like this:

Base newBase(std::unique_ptr<Base>(new Base)); //Illegal in this case.

The meaning of this is the same as the meaning of any other use of non-const references: the function may or may not claim ownership of the pointer. Given this code:

Base newBase(nextBase);

There is no guarantee that nextBase is empty. It may be empty; it may not. It really depends on what Base::Base(std::unique_ptr<Base> &n) wants to do. Because of that, it's not very evident just from the function signature what's going to happen; you have to read the implementation (or associated documentation).

Because of that, I wouldn't suggest this as an interface.

(C) By const l-value reference

Base(std::unique_ptr<Base> const &n);

I don't show an implementation, because you cannot move from a const&. By passing a const&, you are saying that the function can access the Base via the pointer, but it cannot store it anywhere. It cannot claim ownership of it.

This can be useful. Not necessarily for your specific case, but it's always good to be able to hand someone a pointer and know that they cannot (without breaking rules of C++, like no casting away const) claim ownership of it. They can't store it. They can pass it to others, but those others have to abide by the same rules.

(D) By r-value reference

Base(std::unique_ptr<Base> &&n)
  : next(std::move(n)) {}

This is more or less identical to the "by non-const l-value reference" case. The differences are two things.

1. You can pass a temporary:

   Base newBase(std::unique_ptr<Base>(new Base)); //legal now..
   

2. You must use std::move when passing non-temporary arguments.

The latter is really the problem. If you see this line:

Base newBase(std::move(nextBase));

You have a reasonable expectation that, after this line completes, nextBase should be empty. It should have been moved from. After all, you have that std::move sitting there, telling you that movement has occurred.

The problem is that it hasn't. It is not guaranteed to have been moved from. It may have been moved from, but you will only know by looking at the source code. You cannot tell just from the function signature.

Recommendations

• (A) By Value: If you mean for a function to claim ownership of a unique_ptr, take it by value.
• (C) By const l-value reference: If you mean for a function to simply use the unique_ptr for the duration of that function's execution, take it by const&. Alternatively, pass a & or const& to the actual type pointed to, rather than using a unique_ptr.
• (D) By r-value reference: If a function may or may not claim ownership (depending on internal code paths), then take it by &&. But I strongly advise against doing this whenever possible.

How to manipulate unique_ptr

You cannot copy a unique_ptr. You can only move it. The proper way to do this is with the std::move standard library function.

If you take a unique_ptr by value, you can move from it freely. But movement doesn't actually happen because of std::move. Take the following statement:

std::unique_ptr<Base> newPtr(std::move(oldPtr));

This is really two statements:

std::unique_ptr<Base> &&temporary = std::move(oldPtr);
std::unique_ptr<Base> newPtr(temporary);

(note: The above code does not technically compile, since non-temporary r-value references are not actually r-values. It is here for demo purposes only).

The temporary is just an r-value reference to oldPtr. It is in the constructor of newPtr where the movement happens. unique_ptr's move constructor (a constructor that takes a && to itself) is what does the actual movement.

If you have a unique_ptr value and you want to store it somewhere, you must use std::move to do the storage.

Cell spacing and margin is the space between cells.

Cell padding is space inside cells, between the cell border (even if invisible) and the cell content, such as text.

A pure Python equivalent for string comparisons would be:

def less(string1, string2):
    # Compare character by character
    for idx in range(min(len(string1), len(string2))):
        # Get the "value" of the character
        ordinal1, ordinal2 = ord(string1[idx]), ord(string2[idx])
        # If the "value" is identical check the next characters
        if ordinal1 == ordinal2:
            continue
        # It's not equal so we're finished at this index and can evaluate which is smaller.
        else:
            return ordinal1 < ordinal2
    # We're out of characters and all were equal, so the result depends on the length
    # of the strings.
    return len(string1) < len(string2)

This function does the equivalent of the real method (Python 3.6 and Python 2.7) just a lot slower. Also note that the implementation isn't exactly "pythonic" and only works for < comparisons. It's just to illustrate how it works. I haven't checked if it works like Pythons comparison for combined unicode characters.

A more general variant would be:

from operator import lt, gt

def compare(string1, string2, less=True):
    op = lt if less else gt
    for char1, char2 in zip(string1, string2):
        ordinal1, ordinal2 = ord(char1), ord(char1)
        if ordinal1 == ordinal2:
            continue
        else:
            return op(ordinal1, ordinal2)
    return op(len(string1), len(string2))

Using @Pavel's answer as guide, here's a helper method if you don't have the points but have start x,y and height and width. Also can draw inverted/upside down - which is useful for me as it was used as end of vertical barchart.

 private void drawTriangle(int x, int y, int width, int height, boolean inverted, Paint paint, Canvas canvas){

        Point p1 = new Point(x,y);
        int pointX = x + width/2;
        int pointY = inverted?  y + height : y - height;

        Point p2 = new Point(pointX,pointY);
        Point p3 = new Point(x+width,y);


        Path path = new Path();
        path.setFillType(Path.FillType.EVEN_ODD);
        path.moveTo(p1.x,p1.y);
        path.lineTo(p2.x,p2.y);
        path.lineTo(p3.x,p3.y);
        path.close();

        canvas.drawPath(path, paint);
    }

"<name> <substring>"[/.*<([^>]*)/,1]
=> "substring"

No need to use scan, if we need only one result.
No need to use Python's match, when we have Ruby's String[regexp,#].

See: http://ruby-doc.org/core/String.html#method-i-5B-5D

Note: str[regexp, capture] ? new_str or nil

You need to bind this to the constructor and remember that changes to constructor needs restarting the server. Or else, you will end with the same error.

    Gender :<br>
    <input type="radio" name="g" value="male"  <?php echo ($g=='Male')?'checked':'' ?>>male <br>
    <input type="radio" name="g" value="female"<?php echo ($g=='female')?'checked':'' ?>>female
            <?php echo $errors['g'];?>

for ORA-01031: insufficient privileges. Some of the more common causes are:

1. You tried to change an Oracle username or password without having the appropriate privileges.
2. You tried to perform an UPDATE to a table, but you only have SELECT access to the table.
3. You tried to start up an Oracle database using CONNECT INTERNAL.
4. You tried to install an Oracle database without having the appropriate privileges to the operating-system.

The option(s) to resolve this Oracle error are:

1. You can have the Oracle DBA grant you the appropriate privileges that you are missing.
2. You can have the Oracle DBA execute the operation for you.
3. If you are having trouble starting up Oracle, you may need to add the Oracle user to the dba group.

For ORA-00942: table or view does not exist. You tried to execute a SQL statement that references a table or view that either does not exist, that you do not have access to, or that belongs to another schema and you didn't reference the table by the schema name.

If this error occurred because the table or view does not exist, you will need to create the table or view.

You can check to see if the table exists in Oracle by executing the following SQL statement:

select *
from all_objects
where object_type in ('TABLE','VIEW')
and object_name = 'OBJECT_NAME';

For example, if you are looking for a suppliers table, you would execute:

select *
from all_objects
where object_type in ('TABLE','VIEW')
and object_name = 'SUPPLIERS';

OPTION #2

If this error occurred because you do not have access to the table or view, you will need to have the owner of the table/view, or a DBA grant you the appropriate privileges to this object.

OPTION #3

If this error occurred because the table/view belongs to another schema and you didn't reference the table by the schema name, you will need to rewrite your SQL to include the schema name.

For example, you may have executed the following SQL statement:

select *
from suppliers;

But the suppliers table is not owned by you, but rather, it is owned by a schema called app, you could fix your SQL as follows:

select *
from app.suppliers;

If you do not know what schema the suppliers table/view belongs to, you can execute the following SQL to find out:

select owner
from all_objects
where object_type in ('TABLE','VIEW')
and object_name = 'SUPPLIERS';

This will return the schema name who owns the suppliers table.

Using LATEST Bootstrap 4.5+

• Use the same modal repeatedly by passing different Youtube URL's from the HTML Page
• With a great Play button icon and Autoplay enabled
• Just COPY the code and you are all SET!!!
• View solution in Codepen

    // javascript using jQuery - can embed in the script tag
$(".video-link").click(function () {
  var theModal = $(this).data("target");
  videoSRC = $(this).attr("data-video");
  videoSRCauto = videoSRC + "?modestbranding=1&rel=0&showinfo=0&html5=1&autoplay=1";
  $(theModal + ' iframe').attr('src', videoSRCauto);
  $(theModal + ' button.close').click(function () {
    $(theModal + ' iframe').attr('src', videoSRC);
  });
});

#video-section .modal-content {
  min-width: 600px;
}

#video-section .modal-content iframe {
  width: 560px;
  height: 315px;
}

<!-- HTML with Bootstrap 4.5 and Fontawesome -->
<html>
   <head>
      <link rel="stylesheet" href="https://use.fontawesome.com/releases/v5.13.1/css/all.css"
         integrity="sha384-xxzQGERXS00kBmZW/6qxqJPyxW3UR0BPsL4c8ILaIWXva5kFi7TxkIIaMiKtqV1Q" crossorigin="anonymous">
      <link rel="stylesheet" href="https://stackpath.bootstrapcdn.com/bootstrap/4.5.0/css/bootstrap.min.css" integrity="sha384-9aIt2nRpC12Uk9gS9baDl411NQApFmC26EwAOH8WgZl5MYYxFfc+NcPb1dKGj7Sk" crossorigin="anonymous">
   </head>

   <body>
      <section id="video-section" class="py-5 text-center text-white">
         <div class="container h-100 d-flex justify-content-center">
            <div class="row align-self-center">
               <div class="col">
                  <div class="card bg-dark border-0 mb-2 text-white">
                     <div class="card-body">
                        <a href="#" class="btn btn-primary bg-dark stretched-link video-link" data-video="https://www.youtube.com/embed/HnwsG9a5riA" data-toggle="modal" data-target="#video-modal">
                        <i class="fas fa-play fa-3x"></i>
                        </a>
                        <h1 class="card-title">Play Video</h1>
                     </div>
                  </div>
               </div>
            </div>
         </div>

         <!-- Video Modal -->
         <div class="modal fade" id="video-modal" tabindex="-1" role="dialog">
            <div class="modal-dialog h-100 d-flex align-items-center">
               <div class="modal-content">
                  <div class="modal-body">
                     <button type="button" class="close" data-dismiss="modal">
                     <span>&times;</span>
                     </button>
                     <iframe frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
                  </div>
               </div>
            </div>
         </div>
      </section>

      <script src="https://code.jquery.com/jquery-3.5.1.slim.min.js" integrity="sha384-DfXdz2htPH0lsSSs5nCTpuj/zy4C+OGpamoFVy38MVBnE+IbbVYUew+OrCXaRkfj" crossorigin="anonymous"></script>
      <script src="https://cdn.jsdelivr.net/npm/[email protected]/dist/umd/popper.min.js" integrity="sha384-Q6E9RHvbIyZFJoft+2mJbHaEWldlvI9IOYy5n3zV9zzTtmI3UksdQRVvoxMfooAo" crossorigin="anonymous"></script>
      <script src="https://stackpath.bootstrapcdn.com/bootstrap/4.5.0/js/bootstrap.min.js" integrity="sha384-OgVRvuATP1z7JjHLkuOU7Xw704+h835Lr+6QL9UvYjZE3Ipu6Tp75j7Bh/kR0JKI" crossorigin="anonymous"></script>

   </body>
</html>

  [1]: https://codepen.io/richierich25/pen/yLOOYBL

You can add a .env file in all your projects containing COMPOSE_PROJECT_NAME=somename.

COMPOSE_PROJECT_NAME overrides the prefix used to name resources, as such all your projects will use somename_default as their network, making it possible for services to communicate with each other as they were in the same project.

NB: You'll get warnings for "orphaned" containers created from other projects.

Try this:

private void comboBox1_SelectedIndexChanged(object sender, EventArgs e)
{
    ComboBox cmb = (ComboBox)sender;
    int selectedIndex = cmb.SelectedIndex;
    int selectedValue = (int)cmb.SelectedValue;

    ComboboxItem selectedCar = (ComboboxItem)cmb.SelectedItem;
    MessageBox.Show(String.Format("Index: [{0}] CarName={1}; Value={2}", selectedIndex, selectedCar.Text, selecteVal));        
}

I was able to get Jenkins to build a tag by setting the Refspec and Branch Specifier as detailed in this blog post.

I also had to set the Repository Name (to "origin" in my case) so that I could reference it in the Refspec (otherwise it would apparently use a randomly generated name).

Simply install Win64 OpenSSL v1.0.2a or Win32 OpenSSL v1.0.2a, you can download these from http://slproweb.com/products/Win32OpenSSL.html. Works out of the box, no configuration needed.