5 years passed, and it's quite strange that there are so many answers there which don't follow (or are against) bootstrap rules or don't actually answer the question...
(For the details on those mistakes check the last section of this answer)

Short Answer:
Simply use Bootstrap's no-gutters class in your row to remove padding:

  <div class="container-fluid">
    <div class="row no-gutters">
      <div class="col-sm-6">
        <p>Use this document as a way to quickly start any new project.<br> All you get is this text and a mostly
          barebones HTML document.</p>
      </div>
      <div class="col-sm-6">
        <p>Use this document as a way to quickly start any new project.<br> All you get is this text and a mostly
          barebones HTML document.</p>
      </div>
    </div>
  </div>

(Also you've forgotten to add </div> to the end of your file. It's fixed in the code above as well)

Note:

There are cases when you want to remove the padding of the container itself as well. In this case consider dropping .container or .container-fluid classes as recommended by the documentation.

<!--<div class="container-fluid">-->
<div class="row no-gutters">
  <div class="col-sm-6">
    <p>Use this document as a way to quickly start any new project.<br> All you get is this text and a mostly
      barebones HTML document.</p>
  </div>
  <div class="col-sm-6">
    <p>Use this document as a way to quickly start any new project.<br> All you get is this text and a mostly
      barebones HTML document.</p>
  </div>
</div>
<!--</div>-->

Long Answer:

The paddings you get are actually documented in Bootstrap's documentation:

Rows are wrappers for columns. Each column has horizontal padding (called a gutter) for controlling the space between them. This padding is then counteracted on the rows with negative margins. This way, all the content in your columns is visually aligned down the left side.

And about the solution, which was documented as well:

Columns have horizontal padding to create the gutters between individual columns, however, you can remove the margin from rows and padding from columns with .no-gutters on the .row.

Regarding dropping the container:

Need an edge-to-edge design? Drop the parent .container or .container-fluid.

Bonus: About the mistakes found on the other answers

• Avoid hacking bootstrap's container classes instead of making sure that you've put all the content in col-s and wrapped them with row-s as documentation says:

In a grid layout, content must be placed within columns and only columns may be immediate children of rows.

• If you still have to do hack (just in case someone already messed up things and you need to quickly fix your issue) consider using Bootstrap's px-0 for removing horizontal paddings instead pl-0 pr-0 or reinventing your styles.

<script>
    document.getElementById('add-Box').addEventListener('click', function (event) {
        let itemParent = document.getElementById('box-Parent');
        let newItem = document.createElement('li');
        newItem.className = 'box';
        itemParent.appendChild(newItem);
    })
</script>

You can access the groups simply through the groups attribute on User.

from django.contrib.auth.models import User, Group

group = Group(name = "Editor")
group.save()                    # save this new group for this example
user = User.objects.get(pk = 1) # assuming, there is one initial user 
user.groups.add(group)          # user is now in the "Editor" group

then user.groups.all() returns [<Group: Editor>].

Alternatively, and more directly, you can check if a a user is in a group by:

if django_user.groups.filter(name = groupname).exists():

    ...

Note that groupname can also be the actual Django Group object.

Common Resource Grep (crgrep) will search for string matches in tables/columns by name or content and supports a number of DBs, including SQLServer, Oracle and others. Full wild-carding and other useful options.

It's opensource (I'm the author).

http://sourceforge.net/projects/crgrep/

Try sorting index after concatenating them

result=pd.concat([df1,df2]).sort_index()

The below code will return username group membership using the samaccountname. You can modify it to get input from a file or change the query to get accounts with non expiring passwords etc

$location = "c:\temp\Peace2.txt"
$users = (get-aduser -filter *).samaccountname
$le = $users.length
for($i = 0; $i -lt $le; $i++){
  $output = (get-aduser $users[$i] | Get-ADPrincipalGroupMembership).name
  $users[$i] + " " + $output 
  $z =  $users[$i] + " " + $output 
  add-content $location $z
}

Sample Output:

Administrator Domain Users Administrators Schema Admins Enterprise Admins Domain Admins Group Policy Creator Owners
Guest Domain Guests Guests
krbtgt Domain Users Denied RODC Password Replication Group
Redacted Domain Users CompanyUsers Production
Redacted Domain Users CompanyUsers Production
Redacted Domain Users CompanyUsers Production

Use case:

 sesssionStorage.setObj(1,{date:Date.now(),action:'save firstObject'});
 sesssionStorage.setObj(2,{date:Date.now(),action:'save 2nd object'}); 
 //Query first object
  sesssionStorage.getObj(1)
  //Retrieve date created of 2nd object
  new Date(sesssionStorage.getObj(1).date)

API

Storage.prototype.setObj = function(key, obj) {

        return this.setItem(key, JSON.stringify(obj))
    };
    
    Storage.prototype.getObj = function(key) {
        return JSON.parse(this.getItem(key))
    };

This means you are using JPA or hibernate in your code and performing modifying operation on DB without making the business logic transaction. So simple solution for this is mark your piece of code @Transactional

You have to make sure that "Dependency Management" is enabled. To do so, right click on the project name, go to the "Gradle" sub-menu and click on "Enable Dependency Management". Once you do that, Gradle should load all the dependencies for you.

Seems related to https://groups.google.com/forum/#!msg/google-caja-discuss/ite6K5c8mqs/Ayqw72XJ9G8J.

The so-called "Rosetta Flash" vulnerability is that allowing arbitrary yet identifier-like text at the beginning of a JSONP response is sufficient for it to be interpreted as a Flash file executing in that origin. See for more information: http://miki.it/blog/2014/7/8/abusing-jsonp-with-rosetta-flash/

JSONP responses from the proxy servlet now: * are prefixed with "/**/", which still allows them to execute as JSONP but removes requester control over the first bytes of the response. * have the response header Content-Disposition: attachment.

This worked for me for Eclipse-Luna:

1. Right Click on the *.jar in the Referenced Libraries folder under your project, then click on Properties
2. Use the Java Source Attachment page to point to the Workspace location or the External location to the source code of that jar.

The ASP.NET Web API has replaced the WCF Web API previously mentioned.

I thought I'd post an updated answer since most of these responses are from early 2012, and this thread is one of the top results when doing a Google search for "call restful service C#".

Current guidance from Microsoft is to use the Microsoft ASP.NET Web API Client Libraries to consume a RESTful service. This is available as a NuGet package, Microsoft.AspNet.WebApi.Client. You will need to add this NuGet package to your solution.

Here's how your example would look when implemented using the ASP.NET Web API Client Library:

using System;
using System.Collections.Generic;
using System.Net.Http;
using System.Net.Http.Headers;

namespace ConsoleProgram
{
    public class DataObject
    {
        public string Name { get; set; }
    }

    public class Class1
    {
        private const string URL = "https://sub.domain.com/objects.json";
        private string urlParameters = "?api_key=123";

        static void Main(string[] args)
        {
            HttpClient client = new HttpClient();
            client.BaseAddress = new Uri(URL);

            // Add an Accept header for JSON format.
            client.DefaultRequestHeaders.Accept.Add(
            new MediaTypeWithQualityHeaderValue("application/json"));

            // List data response.
            HttpResponseMessage response = client.GetAsync(urlParameters).Result;  // Blocking call! Program will wait here until a response is received or a timeout occurs.
            if (response.IsSuccessStatusCode)
            {
                // Parse the response body.
                var dataObjects = response.Content.ReadAsAsync<IEnumerable<DataObject>>().Result;  //Make sure to add a reference to System.Net.Http.Formatting.dll
                foreach (var d in dataObjects)
                {
                    Console.WriteLine("{0}", d.Name);
                }
            }
            else
            {
                Console.WriteLine("{0} ({1})", (int)response.StatusCode, response.ReasonPhrase);
            }

            // Make any other calls using HttpClient here.

            // Dispose once all HttpClient calls are complete. This is not necessary if the containing object will be disposed of; for example in this case the HttpClient instance will be disposed automatically when the application terminates so the following call is superfluous.
            client.Dispose();
        }
    }
}

If you plan on making multiple requests, you should re-use your HttpClient instance. See this question and its answers for more details on why a using statement was not used on the HttpClient instance in this case: Do HttpClient and HttpClientHandler have to be disposed between requests?

For more details, including other examples, see Call a Web API From a .NET Client (C#)

This blog post may also be useful: Using HttpClient to Consume ASP.NET Web API REST Services

Not sure how to get the IP address specifically, but the location object provides part of the answer.

e.g. these variables might be helpful:

• self.location.host - Sets or retrieves the hostname and port number of the location
• self.location.hostname - Sets or retrieves the host name part of the location or URL.

In Visual Studio Code, the default shortcut for this is Ctrl + P.

Adding a column using SSMS or ALTER TABLE .. ADD will not drop any existing data.

I notice others have given the non-lambda syntax so just to have this complete I'll put in the lambda syntax equivalent:

Non-lambda (as per James's post):

var name = from i in DataContext.MyTable
           where i.ID == 0
           select i.Name

Equivalent lambda syntax:

var name = DataContext.MyTable.Where(i => i.ID == 0)
                              .Select(i => new { Name = i.Name });

There's not really much practical difference, just personal opinion on which you prefer.

Just the same as what should be but change the button component to be label like so

<form id='uploadForm'
      action='http://localhost:8000/upload'
      method='post'
      encType="multipart/form-data">
    <input type="file" id="sampleFile" style="display: none;" />
    <Button htmlFor="sampleFile" component="label" type={'submit'}>Upload</Button> 
</form>

The key advantage is isolation. A crashing process won't bring down other processes, whereas a crashing thread will probably wreak havoc with other threads.

I got the same issue. And I add 2 framework I need to Build Phases. Hope this help!

:set paste is your friend I use putty and end up copying code between windows. Before I was turned on to :set paste (and :set nopaste) copy/paste gave me fits for that very reason.

User ID For element, then

document.getElementById('selValue').value=Your Value;
$('#selValue').selectpicker('refresh');

Supposing you know when the list data has changed, you can manually tell the list to scroll to the bottom by setting the list selection to the last row. Something like:

private void scrollMyListViewToBottom() {
    myListView.post(new Runnable() {
        @Override
        public void run() {
            // Select the last row so it will scroll into view...
            myListView.setSelection(myListAdapter.getCount() - 1);
        }
    });
}

a simple way to select and clear these blank cells to make them blank:

1. Press ctrl + a or pre-select your range
2. Press ctrl + f
3. Leave find what empty and select match entire cell contents.
4. Hit find all
5. Press ctrl + a to select all the empty cells found
6. Close the find dialog
7. Press backspace or delete

As of npm@5, the npm cache self-heals from corruption issues and data extracted from the cache is guaranteed to be valid. If you want to make sure everything is consistent, use npm cache verify instead. On the other hand, if you're debugging an issue with the installer, you can use npm install --cache /tmp/empty-cache to use a temporary cache instead of nuking the actual one.

If you're sure you want to delete the entire cache, rerun:

npm cache clean --force

A complete log of this run can be found in /Users/USERNAME/.npm/_logs/2019-01-08T21_29_30_811Z-debug.log.

You can try ES6 Modules in Google Chrome Beta (61) / Chrome Canary.

Reference Implementation of ToDo MVC by Paul Irish - https://paulirish.github.io/es-modules-todomvc/

I've basic demo -

//app.js
import {sum} from './calc.js'

console.log(sum(2,3));

//calc.js
let sum = (a,b) => { return a + b; }

export {sum};

<html> 
    <head>
        <meta charset="utf-8" />
    </head>

    <body>
        <h1>ES6</h1>
        <script src="app.js" type="module"></script>
    </body>

</html>

Hope it helps!

$ which nc
/bin/nc

$ rpm -qf /bin/nc
nmap-ncat-7.40-7.fc26.x86_64

$ ssh -o "ProxyCommand nc --proxy <addr[:port]> %h %p" USER@HOST

$ ssh -o "ProxyCommand nc --proxy <addr[:port]> --proxy-type <type> --proxy-auth <auth> %h %p" USER@HOST

You want something like the cex=1.5 argument to scale fonts 150 percent. But do see help(par) as there are also cex.lab, cex.axis, ...

You can get a stream from the List and put in in the TreeSet from which you provide a custom comparator that compares id uniquely.

Then if you really need a list you can put then back this collection into an ArrayList.

import static java.util.Comparator.comparingInt;
import static java.util.stream.Collectors.collectingAndThen;
import static java.util.stream.Collectors.toCollection;

...
List<Employee> unique = employee.stream()
                                .collect(collectingAndThen(toCollection(() -> new TreeSet<>(comparingInt(Employee::getId))),
                                                           ArrayList::new));

Given the example:

List<Employee> employee = Arrays.asList(new Employee(1, "John"), new Employee(1, "Bob"), new Employee(2, "Alice"));

It will output:

[Employee{id=1, name='John'}, Employee{id=2, name='Alice'}]

Another idea could be to use a wrapper that wraps an employee and have the equals and hashcode method based with its id:

class WrapperEmployee {
    private Employee e;

    public WrapperEmployee(Employee e) {
        this.e = e;
    }

    public Employee unwrap() {
        return this.e;
    }

    @Override
    public boolean equals(Object o) {
        if (this == o) return true;
        if (o == null || getClass() != o.getClass()) return false;
        WrapperEmployee that = (WrapperEmployee) o;
        return Objects.equals(e.getId(), that.e.getId());
    }

    @Override
    public int hashCode() {
        return Objects.hash(e.getId());
    }
}

Then you wrap each instance, call distinct(), unwrap them and collect the result in a list.

List<Employee> unique = employee.stream()
                                .map(WrapperEmployee::new)
                                .distinct()
                                .map(WrapperEmployee::unwrap)
                                .collect(Collectors.toList());

In fact, I think you can make this wrapper generic by providing a function that will do the comparison:

public class Wrapper<T, U> {
    private T t;
    private Function<T, U> equalityFunction;

    public Wrapper(T t, Function<T, U> equalityFunction) {
        this.t = t;
        this.equalityFunction = equalityFunction;
    }

    public T unwrap() {
        return this.t;
    }

    @Override
    public boolean equals(Object o) {
        if (this == o) return true;
        if (o == null || getClass() != o.getClass()) return false;
        @SuppressWarnings("unchecked")
        Wrapper<T, U> that = (Wrapper<T, U>) o;
        return Objects.equals(equalityFunction.apply(this.t), that.equalityFunction.apply(that.t));
    }

    @Override
    public int hashCode() {
        return Objects.hash(equalityFunction.apply(this.t));
    }
}

and the mapping will be:

.map(e -> new Wrapper<>(e, Employee::getId))

Like Extension Linq / SQL

LikeExtension Class

Tested in .NET 5

 public static class LikeExtension {

    private static string ColumnDataBase<TEntity, TKey>(IModel model, Expression<Func<TEntity, TKey>> predicate) where TEntity : class {

        ITable table = model
            .GetRelationalModel()
            .Tables
            .First(f => f
                .EntityTypeMappings
                .First()
                .EntityType == model
                .FindEntityType(predicate
                    .Parameters
                    .First()
                .Type
            ));

        string column = (predicate.Body as MemberExpression).Member.Name;
        string columnDataBase = table.Columns.First(f => f.PropertyMappings.Count(f2 => f2.Property.Name == column) > 0).Name;

        return columnDataBase;

    }

    public static IQueryable<TEntity> Like<TEntity, TKey>(this DbContext context, Expression<Func<TEntity, TKey>> predicate, string text) where TEntity : class {

        string columnDataBase = ColumnDataBase(context.Model, predicate);
        return context.Set<TEntity>().FromSqlRaw(context.Set<TEntity>().ToQueryString() + " WHERE [" + columnDataBase + "] LIKE {0}", text);

    }

    public static async Task<IEnumerable<TEntity>> LikeAsync<TEntity, TKey>(this DbContext context, Expression<Func<TEntity, TKey>> predicate, string text, CancellationToken cancellationToken) where TEntity : class {

        string columnDataBase = ColumnDataBase(context.Model, predicate);
        return await context.Set<TEntity>().FromSqlRaw(context.Set<TEntity>().ToQueryString() + " WHERE [" + columnDataBase + "] LIKE {0}", text).ToListAsync(cancellationToken);

    }

    public static async Task<IEnumerable<TEntity>> LikeAsync<TEntity, TKey>(this IQueryable<TEntity> query, Expression<Func<TEntity, TKey>> predicate, string text, CancellationToken cancellationToken) where TEntity : class {

        DbSet<TEntity> entities = query as DbSet<TEntity>;
        string columnDataBase = ColumnDataBase(entities.EntityType.Model, predicate);
        return await entities.FromSqlRaw(query.ToQueryString() + " WHERE [" + columnDataBase + "] LIKE {0}", text).ToListAsync(cancellationToken);

    }

    public static IQueryable<TEntity> Like<TEntity, TKey>(this IQueryable<TEntity> query, Expression<Func<TEntity, TKey>> predicate, string text) where TEntity : class {

        DbSet<TEntity> entities = query as DbSet<TEntity>;
        string columnDataBase = ColumnDataBase(entities.EntityType.Model, predicate);
        return entities.FromSqlRaw(query.ToQueryString() + " WHERE [" + columnDataBase + "] LIKE {0}", text);

    }

}

Repository

    public async Task<IEnumerable<TEntity>> LikeAsync<TKey>(Expression<Func<TEntity, TKey>> predicate, string text, CancellationToken cancellationToken) {

        return await context.LikeAsync(predicate, text, cancellationToken);

    }

    public IQueryable<TEntity> Like<TKey>(Expression<Func<TEntity, TKey>> predicate, string text) {

        return context.Like(predicate, text);

    }

Use

 IQueryable<CountryEntity> result = countryRepository
     .Like(k => k.Name, "%Bra[sz]il%") /*Use Sync*/
     .Where(w => w.DateRegister < DateTime.Now) /*Example*/
     .Take(10); /*Example*/

Or

 IEnumerable<CountryEntity> result = await countryRepository
     .LikeAsync(k => k.Name, "%Bra[sz]il%", cancellationToken); /*Use Async*/

Or

 IQueryable<CountryEntity> result = context.Countries
     .Like(k => k.Name, "%Bra[sz]il%")
     .Where(w => w.Name != null); /*Example*/

Or

 List<CountryEntity> result2 = await context.Countries
     .Like(k => k.Name, "%Bra[sz]il%")
     .Where(w => w.Name != null) /*Example*/
     .ToListAsync(); /*Use Async*/

Or

 IEnumerable<CountryEntity> result3 = await context.Countries
     .Where(w => w.Name != null)
     .LikeAsync(k => k.Name, "%Bra[sz]il%", cancellationToken); /*Use Async*/

Suppose constructors were inherited... then because every class eventually derives from Object, every class would end up with a parameterless constructor. That's a bad idea. What exactly would you expect:

FileInputStream stream = new FileInputStream();

to do?

Now potentially there should be a way of easily creating the "pass-through" constructors which are fairly common, but I don't think it should be the default. The parameters needed to construct a subclass are often different from those required by the superclass.

1) Make the dictionary:

X = {'a': 1}

2) Write to a new file:

file = open('X_Data.py', 'w')
file.write(str(X))
file.close()

Lastly, in the file that you want the variable to be, read that file and make a new variable with the data from the data file:

import ast
file = open('X_Data.py', 'r')
f = file.read()
file.close()
X = ast.literal_eval(f)

Here is the really simple and short solution with SimpleEntry:

AbstractMap.Entry<String, Float> myTwoCents=new AbstractMap.SimpleEntry<>("maximum possible performance reached" , 99.9f);

String question=myTwoCents.getKey();
Float answer=myTwoCents.getValue();

Only uses Java built in functions and it comes with the type safty benefit.

<?php

   $email = "someone@exa mple.com";

   if(!filter_var($email, FILTER_VALIDATE_EMAIL))
      echo "E-mail is not valid";
   else
      echo "E-mail is valid";

?>

I was trying to use BrowserModule in a shared module (import and export). That was not allowed so instead I had to use the CommonModule instead and it worked.

https://developer.mozilla.org/en/CSS/vertical-align

<table style="height: 275px; width: 188px">
    <tr>
        <td style="width: 259px; vertical-align:top">
            main page
        </td>
    </tr>
</table>

?

You could do this easily using array reduce in ES6

In this example we create a reducer function and pass an object '{}' as initial value to the reduce function along with the reducer

const arr =    [ [ 'cardType', 'iDEBIT' ],_x000D_
  [ 'txnAmount', '17.64' ],_x000D_
  [ 'txnId', '20181' ],_x000D_
  [ 'txnType', 'Purchase' ],_x000D_
  [ 'txnDate', '2015/08/13 21:50:04' ],_x000D_
  [ 'respCode', '0' ],_x000D_
  [ 'isoCode', '0' ],_x000D_
  [ 'authCode', '' ],_x000D_
  [ 'acquirerInvoice', '0' ],_x000D_
  [ 'message', '' ],_x000D_
  [ 'isComplete', 'true' ],_x000D_
  [ 'isTimeout', 'false' ] ];_x000D_
_x000D_
const reducer = (obj, item) => {_x000D_
  obj[item[0]] = item[1];_x000D_
  return obj;_x000D_
};_x000D_
_x000D_
const result = arr.reduce(reducer, {});_x000D_
_x000D_
console.log(result);

This is easier than trapping the exception:

import os
if not os.path.exists(...):
    os.makedirs(...)

Disclaimer This approach requires two system calls which is more susceptible to race conditions under certain environments/conditions. If you're writing something more sophisticated than a simple throwaway script running in a controlled environment, you're better off going with the accepted answer that requires only one system call.

UPDATE 2012-07-27

I'm tempted to delete this answer, but I think there's value in the comment thread below. As such, I'm converting it to a wiki.

Just use IDA PRO (https://www.hex-rays.com/products/ida/index.shtml) to disassemble the file, and search for some known command line option (using Search...Text) - in that section you will then typically see all the command line options - for the program (LIB2NIST.exe) in the screenshot below, for example, it shows a documented command line option (/COM2TAG) but also some undocumented ones, like /L. Hope this helps?

The big downside of your current approach is its inefficiency with large search result sets, as you have to pull down the entire result set from the database each time, even though you only intend to display one page of results.

In order to only pull down the objects you actually need from the database, you have to use pagination on a QuerySet, not a list. If you do this, Django actually slices the QuerySet before the query is executed, so the SQL query will use OFFSET and LIMIT to only get the records you will actually display. But you can't do this unless you can cram your search into a single query somehow.

Given that all three of your models have title and body fields, why not use model inheritance? Just have all three models inherit from a common ancestor that has title and body, and perform the search as a single query on the ancestor model.

Properties prop = new Properties();
String fileName = "./src/test/resources/predefined.properties";
FileInputStream inputStream = new FileInputStream(fileName);
InputStreamReader reader = new InputStreamReader(inputStream,"UTF-8");

In Pythons <= 3.4 you can, as others suggested, use list(range(10)) in order to make a list out of a range (In general, any iterable).

Another alternative, introduced in Python 3.5 with its unpacking generalizations, is by using * in a list literal []:

>>> r = range(10)
>>> l = [*r]
>>> print(l)
[0, 1, 2, 3, 4, 5, 6, 7, 8, 9]

Though this is equivalent to list(r), it's literal syntax and the fact that no function call is involved does let it execute faster. It's also less characters, if you need to code golf :-)

This is super simple, just use dir(object)
This will return a list of every available function and attribute of the object.

For example we have:

example.com/list/search?q=Somethink

And you need use variable url like this by window.location.href:

example.com/list/edit

From url:

example.com/list/search?q=Somethink
example.com/list/

var url = (window.location.href);
    url = url.split('/search')[0];
    url = (url + '/edit');

This is simple solution:-)

you can use this code inside col-md-3 , col-md-9

.col-side-right{
  flex: 0 0 20% !important;
  max-width: 20%;
}

.col-side-left{
  flex: 0 0 80%;
  max-width: 80%;
}

A metaphorical explanation:

I have a parcel I want delivered to a friend, and I also want to know when my friend receives it.

So I take the parcel to the post office and ask them to deliver it. If I want to know when my friend receives the parcel, I have two options:

(a) I can wait at the post office until it is delivered.

(b) I will get an email when it is delivered.

Option (b) is analogous to a callback.

data="UTF-8 DATA"
udata=data.decode("utf-8")
asciidata=udata.encode("ascii","ignore")

Just for the sake of academic interest, I did it this way...

(dt.replace(month = dt.month % 12 +1, day = 1)-timedelta(days=1)).day

A supplementarily handy (but trivial) tip for installing older version of packages from source.

First, if you call "install.packages", it always installs the latest package from repo. If you want to install the older version of packages, say for compatibility, you can call install.packages("url_to_source", repo=NULL, type="source"). For example:

install.packages("http://cran.r-project.org/src/contrib/Archive/RNetLogo/RNetLogo_0.9-6.tar.gz", repo=NULL, type="source")

Without manually downloading packages to the local disk and switching to the command line or installing from local disk, I found it is very convenient and simplify the call (one-step).

Plus: you can use this trick with devtools library's dev_mode, in order to manage different versions of packages:

Reference: doc devtools

Also, you could use either "range" or "count" functions. As follows:

a = ["foo", "bar", "baz"]
for i in range(len(a)-1, -1, -1):
    print(i, a[i])

3 baz
2 bar
1 foo

You could also use "count" from itertools as following:

a = ["foo", "bar", "baz"]
from itertools import count, takewhile

def larger_than_0(x):
    return x > 0

for x in takewhile(larger_than_0, count(3, -1)):
    print(x, a[x-1])

3 baz
2 bar
1 foo

Try for this:

boolean blnResult = Arrays.equals(byteArray1, byteArray2);

I am also not sure about this, but try this may be it works.

You can do:

import matplotlib.pyplot as plt
x = [1,2,3,4,5]
y = [2,1,3,6,7]

plt.plot(x, y, style='.-')
plt.show()

This will return a graph with the data points marked with a dot

It maybe work looking at Character recoqnition software as there are many libraries out there that perform the same thing. I reading an image and storing it. Micrsoft office is able to read tiff files and return alphanumerics

From Python version 2.6 on you can use multiple arguments to set.intersection(), like

u = set.intersection(s1, s2, s3)

If the sets are in a list, this translates to:

u = set.intersection(*setlist)

where *a_list is list expansion

Note that set.intersection is not a static method, but this uses the functional notation to apply intersection of the first set with the rest of the list. So if the argument list is empty this will fail.

BitmapFactory.Options options=new BitmapFactory.Options();
            options.inSampleSize = 10;
            FixBitmap = BitmapFactory.decodeFile(ImagePath, options);
            //FixBitmap = BitmapFactory.decodeResource(getResources(), R.drawable.gv);

           byteArrayOutputStream = new ByteArrayOutputStream();
           FixBitmap.compress(Bitmap.CompressFormat.JPEG, 80, byteArrayOutputStream); //compress to 50% of original image quality
           byteArray = byteArrayOutputStream.toByteArray();

           ConvertImage = Base64.encodeToString(byteArray, Base64.DEFAULT);

There are two ways to add one dictionary to another.

Update (modifies orig in place)

orig.update(extra)    # Python 2.7+
orig |= extra         # Python 3.9+

Merge (creates a new dictionary)

# Python 2.7+
dest = collections.ChainMap(orig, extra)
dest = {k: v for d in (orig, extra) for (k, v) in d.items()}

# Python 3
dest = {**orig, **extra}          
dest = {**orig, 'D': 4, 'E': 5}

# Python 3.9+ 
dest = orig | extra

Note that these operations are noncommutative. In all cases, the latter is the winner. E.g.

orig  = {'A': 1, 'B': 2}
extra = {'A': 3, 'C': 3}

dest = orig | extra
# dest = {'A': 3, 'B': 2, 'C': 3}

dest = extra | orig
# dest = {'A': 1, 'B': 2, 'C': 3}

It is also important to note that only from Python 3.7 (and CPython 3.6) dicts are ordered. So, in previous versions, the order of the items in the dictionary may vary.

closest() only looks for parents, I'm guessing what you really want is .find()

$(this).closest('.row').children('.column').find('.inputQty').val();

You can use java.sql.Date.valueOf() method as:

Date date = java.sql.Date.valueOf(localDate);

No need to add time and time zone info here because they are taken implicitly.
See LocalDate to java.util.Date and vice versa simpliest conversion?

I usually include a small function in my objects which allows me to dump to array or json or xml. Something like:

public function exportObj($method = 'a')
{
     if($method == 'j')
     {
         return json_encode(get_object_vars($this));
     }
     else
     {
         return get_object_vars($this);
     }
}

either way, get_object_vars() is probably useful to you.

Use .net inbuilt class JavaScriptSerializer

  JavaScriptSerializer js = new JavaScriptSerializer();
  string json = js.Serialize(obj);

var pattern = /[0-9!"£$%^&*()_+-=]/;

This tries to avoid some scenarios, just in case:

Overflowing any buffers the original string might get passed to. Slowness or oddities caused by denormal numbers like 1E-323. Passing Infinity when a finite number is expected (try 1E309 or -1E309).

After further reading, and confirmation from Linus G Thiel above, I found I simply had to,

• Downgrade to Node.js 0.6.12
• And either,
  • Install Mocha as global
  • Add ./node_modules/.bin to my PATH

Use Math.Max:

int x = 3, y = 4, z = 5;
Console.WriteLine(Math.Max(Math.Max(x, y), z));

I've started using PDO because the statement support is better, in my opinion. I'm using an ActiveRecord-esque data-access layer, and it's much easier to implement dynamically generated statements. MySQLi's parameter binding must be done in a single function/method call, so if you don't know until runtime how many parameters you'd like to bind, you're forced to use call_user_func_array() (I believe that's the right function name) for selects. And forget about simple dynamic result binding.

Most of all, I like PDO because it's a very reasonable level of abstraction. It's easy to use it in completely abstracted systems where you don't want to write SQL, but it also makes it easy to use a more optimized, pure query type of system, or to mix-and-match the two.

Open the output stream and store properties after you have closed the input stream.

FileInputStream in = new FileInputStream("First.properties");
Properties props = new Properties();
props.load(in);
in.close();

FileOutputStream out = new FileOutputStream("First.properties");
props.setProperty("country", "america");
props.store(out, null);
out.close();

Use sortedWith to sort a list with Comparator.

You can then construct a comparator using several ways:

• compareBy, thenBy construct the comparator in a chain of calls:

  list.sortedWith(compareBy<Person> { it.age }.thenBy { it.name }.thenBy { it.address })
  

• compareBy has an overload which takes multiple functions:

  list.sortedWith(compareBy({ it.age }, { it.name }, { it.address }))
  

Using Java 8

import java.util.List;
import java.util.Map;
import java.util.stream.Collectors;
import java.util.stream.Stream;

class Student {

    String stud_id;
    String stud_name;
    String stud_location;

    public String getStud_id() {
        return stud_id;
    }

    public String getStud_name() {
        return stud_name;
    }

    public String getStud_location() {
        return stud_location;
    }



    Student(String sid, String sname, String slocation) {

        this.stud_id = sid;
        this.stud_name = sname;
        this.stud_location = slocation;

    }
}

class Temp
{
    public static void main(String args[])
    {

        Stream<Student> studs = 
        Stream.of(new Student("1726", "John", "New York"),
                new Student("4321", "Max", "California"),
                new Student("2234", "Max", "Los Angeles"),
                new Student("7765", "Sam", "California"));
        Map<String, Map<Object, List<Student>>> map= studs.collect(Collectors.groupingBy(Student::getStud_name,Collectors.groupingBy(Student::getStud_location)));
                System.out.println(map);//print by name and then location
    }

}

The result will be:

{
    Max={
        Los Angeles=[Student@214c265e], 
        California=[Student@448139f0]
    }, 
    John={
        New York=[Student@7cca494b]
    }, 
    Sam={
        California=[Student@7ba4f24f]
    }
}

I know this is an old thread, but what about borrowing from C syntax:

(o.get('uses_votes')).equals("1") ? true : false;

I know this may be a bit old, but try using PDO::lastInsertId. I think it does what you want it to, but you would have to rewrite your application to use PDO (Which is a lot safer against attacks)

In ionic 4.6 I use the following technique and it works. I am adding this answer so that if anybody is facing similar issues in newer ionic version app, it may help them.

i) Open app.module.ts and add the following code block to import HttpModule and HttpClientModule

import { HttpModule } from '@angular/http';
import {   HttpClientModule } from '@angular/common/http';

ii) In @NgModule import sections add below lines:

HttpModule,
HttpClientModule,

So, in my case @NgModule, looks like this:

@NgModule({
  declarations: [AppComponent ],
  entryComponents: [ ],
  imports: [
    BrowserModule,
    HttpModule,
    HttpClientModule,
    IonicModule.forRoot(),
    AppRoutingModule, 
  ],
  providers: [
    StatusBar,
    SplashScreen,
    { provide: RouteReuseStrategy, useClass: IonicRouteStrategy }
  ],
  bootstrap: [AppComponent]
})

That's it!

You can use the MySQL Connector/Python

Installation via PyPip

pip install mysql-connector-python

Further information can be found on the MySQL Connector/Python 1.0.5 beta announcement blog.

On Launchpad there's a good example of how to add-, edit- or remove data with the library.

The Jayrock RPC library is a great tool for doing this in a nice familliar way for C# developers. It allows you to create a .NET class with the methods you require, and add this class as a script (in a roundabout way) to your page. You can then create a js object of your type and call methods as you would any other object.

It essentially hides away ajax implementation and presents RPC in a familliar format. Mind you the best option really is to use ASP.NET MVC and use jQuery ajax calls to action methods - much more concise and less messing about!

The function that I use to find the length of the string is length, used as follows:

SELECT * FROM table ORDER BY length(column);

Try this:

$('select option:selected').text();

Had the same problem for few days. Found a solution at last. The PHP server returned some unseen characters which you could not see in the LOG or in System.out.

So the solution was that i tried to substring my json String one by one and when i came to substring(3) the error went away.

BTW. i used UTF-8 encoding on both sides. PHP side: header('Content-type=application/json; charset=utf-8');

JAVA side: BufferedReader reader = new BufferedReader(new InputStreamReader(is, "utf-8"), 8);

So try the solution one by one 1,2,3,4...! Hope it helps you guys!

try {
            jObj = new JSONObject(json.substring(3));
        } catch (JSONException e) {
            Log.e("JSON Parser", "Error parsing data [" + e.getMessage()+"] "+json);
        }

For the 24-hour time, you need to use HH24 instead of HH.

For the 12-hour time, the AM/PM indicator is written as A.M. (if you want periods in the result) or AM (if you don't). For example:

SELECT invoice_date,
       TO_CHAR(invoice_date, 'DD-MM-YYYY HH24:MI:SS') "Date 24Hr",
       TO_CHAR(invoice_date, 'DD-MM-YYYY HH:MI:SS AM') "Date 12Hr"
  FROM invoices
;

For more information on the format models you can use with TO_CHAR on a date, see http://docs.oracle.com/cd/E16655_01/server.121/e17750/ch4datetime.htm#NLSPG004.

Don't forget the 5xx errors as well for application errors.

In this case what about 409 (Conflict)? This assumes that the user can fix the problem by deleting stored resources.

Otherwise 507 (not entirely standard) may also work. I wouldn't use 200 unless you use 200 for errors in general.

In woocommerce,

Get regular price :

$price = get_post_meta( get_the_ID(), '_regular_price', true);
// $price will return regular price

Get sale price:

$sale = get_post_meta( get_the_ID(), '_sale_price', true);
// $sale will return sale price

This will give you duplicate rows:

vocabulary[duplicated(vocabulary$id),]

This will give you the number of duplicates:

dim(vocabulary[duplicated(vocabulary$id),])[1]

Example:

vocabulary2 <-rbind(vocabulary,vocabulary[1,]) #creates a duplicate at the end
vocabulary2[duplicated(vocabulary2$id),]
#            id year    sex education vocabulary
#21639 20040001 2004 Female         9          3
dim(vocabulary2[duplicated(vocabulary2$id),])[1]
#[1] 1 #=1 duplicate

EDIT

OK, with the additional information, here's what you should do: duplicated has a fromLast option which allows you to get duplicates from the end. If you combine this with the normal duplicated, you get all duplicates. The following example adds duplicates to the original vocabulary object (line 1 is duplicated twice and line 5 is duplicated once). I then use table to get the total number of duplicates per ID.

#Create vocabulary object with duplicates
voc.dups <-rbind(vocabulary,vocabulary[1,],vocabulary[1,],vocabulary[5,])

#List duplicates
dups <-voc.dups[duplicated(voc.dups$id)|duplicated(voc.dups$id, fromLast=TRUE),]
dups
#            id year    sex education vocabulary
#1     20040001 2004 Female         9          3
#5     20040008 2004   Male        14          1
#21639 20040001 2004 Female         9          3
#21640 20040001 2004 Female         9          3
#51000 20040008 2004   Male        14          1

#Count duplicates by id
table(dups$id)
#20040001 20040008 
#       3        2 

use numpy.round

import numpy as np
precision = 3
floats = [1.123123123, 2.321321321321]
new_float = np.round(floats, precision)

You can also try Notification API. Here's an example:

function message(msg){
    if (window.webkitNotifications) {
        if (window.webkitNotifications.checkPermission() == 0) {
        notification = window.webkitNotifications.createNotification(
          'picture.png', 'Title', msg);
                    notification.onshow = function() { // when message shows up
                        setTimeout(function() {
                            notification.close();
                        }, 1000); // close message after one second...
                    };
        notification.show();
      } else {
        window.webkitNotifications.requestPermission(); // ask for permissions
      }
    }
    else {
        alert(msg);// fallback for people who does not have notification API; show alert box instead
    }
    }

To use this, simply write:

message("hello");

Instead of:

alert("hello");

Note: Keep in mind that it's only currently supported in Chrome, Safari, Firefox and some mobile web browsers (jan. 2014)

Find supported browsers here.

For others who are looking to remove a built-in library, the route is to get into PackageContents -> Java -> libraries.

BUT : IT MAKES NO SENSE TO ELIMINATE LIBRARIES inside the app, they don't take space, don't have any influence on performance, and if you don't know what you are doing, you can harm the program. I did it because Arduino told me about libraries to update, showing then a board I don't have, and when saying ok it wanted to install a lot of new dependencies - I just felt forced to something I don't want, so I deinstalled that board.

Not sure when this changed, but with the latest version of typescript, you just need to use import moment from 'moment'; and everything else should work as normal.

UPDATE:

Looks like moment recent fixed their import. As of at least 2.24.0 you'll want to use import * as moment from 'moment';

I created a small library that does this (along with some other handy conversions). It's called reimg, and it's really simple to use.

ReImg.fromCanvas(yourCanvasElement).toPng()

For IntelliJ IDEA 2017.2 I did the following to fix this issue: Go to your project structure Now go to SDKs under platform settings and click the green add button. Add your JDK path. In my case it was this path C:\Program Files\Java\jdk1.8.0_144 Now Just go Project under Project settings and select the project SDK.

Two utilities in package taRifx can be used in concert to produce multi-row tables of nested heirarchies.

library(datasets)
library(taRifx)
library(xtable)

test.by <- bytable(ChickWeight$weight, list( ChickWeight$Chick, ChickWeight$Diet) )
colnames(test.by) <- c('Diet','Chick','Mean Weight')
print(latex.table.by(test.by), include.rownames = FALSE, include.colnames = TRUE, sanitize.text.function = force)
#   then add \usepackage{multirow} to the preamble of your LaTeX document
#   for longtable support, add ,tabular.environment='longtable' to the print command (plus add in ,floating=FALSE), then \usepackage{longtable} to the LaTeX preamble

Here example on plain JS:

document.querySelector('#myDiv').addEventListener('keyup', function (e) {_x000D_
  console.log(e.key)_x000D_
})

#myDiv {_x000D_
  outline: none;_x000D_
}

<div _x000D_
  id="myDiv"_x000D_
  tabindex="0"_x000D_
>_x000D_
  Press me and start typing_x000D_
</div>

Open Command Prompt and type in the following command: java -version

Upon successful execution, the command will output the version of Java along with Java SE Runtime Environment’s build and Java HotSpot Client VM’s build.

Now Kibana 4 allows you to use aggregations. Apart from building a panel like the one that was explained in this answer for Kibana 3, now we can see the number of unique IPs in different periods, that was (IMO) what the OP wanted at the first place.

To build a dashboard like this you should go to Visualize -> Select your Index -> Select a Vertical Bar chart and then in the visualize panel:

• In the Y axis we want the unique count of IPs (select the field where you stored the IP) and in the X axis we want a date histogram with our timefield.

• After pressing the Apply button, we should have a graph that shows the unique count of IP distributed on time. We can change the time interval on the X axis to see the unique IPs hourly/daily...

Just take into account that the unique counts are approximate. For more information check also this answer.

jdk-7u80-macosx-x64.dmg fix this problem.

Dir

Use the dir command. Type in dir /? for help and options.

dir /a:d /b

Redirect

Then use a redirect to save the list to a file.

> list.txt

Together

dir /a:d /b > list.txt

This will output just the names of the directories. if you want the full path of the directories use this below.

Full Path

for /f "delims=" %%D in ('dir /a:d /b') do echo %%~fD

Alternative

other method just using the for command. See for /? for help and options. This can output just the name %%~nxD or the full path %%~fD

for /d %%D in (*) do echo %%~fD

Notes

To use these commands directly on the command line, change the double percent signs to single percent signs. %% to %

To redirect the for methods, just add the redirect after the echo statements. Use the double arrow >> redirect here to append to the file, else only the last statement will be written to the file due to overwriting all the others.

... echo %%~fD>> list.txt

You are missing a semicolon at the end of your 'struct' definition.

Also,

*sotrudnik

needs to be

sotrudnik*

In Java 8 you can use LocalDate which is very similar to the one from Joda Time.

I found this example http://android-codes-examples.blogspot.com/2011/11/show-or-hide-soft-keyboard-on-opening.html. Add the following code just before alert.show().

InputMethodManager imm = (InputMethodManager) getSystemService(Context.INPUT_METHOD_SERVICE);
imm.toggleSoftInput(InputMethodManager.SHOW_FORCED,0);

when you add Domains in Google recaptcha

Add new domain: Localhost not localhost

"L" is capital letter

Good luck

For the most recent version of Angular as of this post, it seems you must first create a MatDialogConfig object and pass it as a second parameter to dialog.open() because Typescript expects the second parameter to be of type MatDialogConfig.

const matDialogConfig = new MatDialogConfig();
matDialogConfig.width = "600px";
matDialogConfig.height = "480px";
this.dialog.open(MyDialogComponent, matDialogConfig);

You can use string.indexOf('a').

If the char a is present in string :

it returns the the index of the first occurrence of the character in the character sequence represented by this object, or -1 if the character does not occur.

Playlist hack didn't work for me either. Working workaround for September 2018 (bonus: set width and height by CSS for #yt-wrap instead of hard-coding it in JS):

<div id="yt-wrap">
    <!-- 1. The <iframe> (and video player) will replace this <div> tag. -->
    <div id="ytplayer"></div>
</div>

<script>
  // 2. This code loads the IFrame Player API code asynchronously.
  var tag = document.createElement('script');
  tag.src = "https://www.youtube.com/player_api";
  var firstScriptTag = document.getElementsByTagName('script')[0];
  firstScriptTag.parentNode.insertBefore(tag, firstScriptTag);

  // 3. This function creates an <iframe> (and YouTube player)
  //    after the API code downloads.
  var player;
  function onYouTubePlayerAPIReady() {
    player = new YT.Player('ytplayer', {
      width: '100%',
      height: '100%',
      videoId: 'VIDEO_ID',
      events: {
        'onReady': onPlayerReady,
        'onStateChange': onPlayerStateChange
      }
    });
  }

  // 4. The API will call this function when the video player is ready.
  function onPlayerReady(event) {
    event.target.playVideo();
    player.mute(); // comment out if you don't want the auto played video muted
  }

  // 5. The API calls this function when the player's state changes.
  //    The function indicates that when playing a video (state=1),
  //    the player should play for six seconds and then stop.
  function onPlayerStateChange(event) {
    if (event.data == YT.PlayerState.ENDED) {
      player.seekTo(0);
      player.playVideo();
    }
  }
  function stopVideo() {
    player.stopVideo();
  }
</script>

Here's one way: You basically re-write your sort function to take a list of sort functions, each sort function compares the attributes you want to test, on each sort test, you look and see if the cmp function returns a non-zero return if so break and send the return value. You call it by calling a Lambda of a function of a list of Lambdas.

Its advantage is that it does single pass through the data not a sort of a previous sort as other methods do. Another thing is that it sorts in place, whereas sorted seems to make a copy.

I used it to write a rank function, that ranks a list of classes where each object is in a group and has a score function, but you can add any list of attributes. Note the un-lambda-like, though hackish use of a lambda to call a setter. The rank part won't work for an array of lists, but the sort will.

#First, here's  a pure list version
my_sortLambdaLst = [lambda x,y:cmp(x[0], y[0]), lambda x,y:cmp(x[1], y[1])]
def multi_attribute_sort(x,y):
    r = 0
    for l in my_sortLambdaLst:
        r = l(x,y)
        if r!=0: return r #keep looping till you see a difference
    return r

Lst = [(4, 2.0), (4, 0.01), (4, 0.9), (4, 0.999),(4, 0.2), (1, 2.0), (1, 0.01), (1, 0.9), (1, 0.999), (1, 0.2) ]
Lst.sort(lambda x,y:multi_attribute_sort(x,y)) #The Lambda of the Lambda
for rec in Lst: print str(rec)

Here's a way to rank a list of objects

class probe:
    def __init__(self, group, score):
        self.group = group
        self.score = score
        self.rank =-1
    def set_rank(self, r):
        self.rank = r
    def __str__(self):
        return '\t'.join([str(self.group), str(self.score), str(self.rank)]) 


def RankLst(inLst, group_lambda= lambda x:x.group, sortLambdaLst = [lambda x,y:cmp(x.group, y.group), lambda x,y:cmp(x.score, y.score)], SetRank_Lambda = lambda x, rank:x.set_rank(rank)):
    #Inner function is the only way (I could think of) to pass the sortLambdaLst into a sort function
    def multi_attribute_sort(x,y):
        r = 0
        for l in sortLambdaLst:
            r = l(x,y)
            if r!=0: return r #keep looping till you see a difference
        return r

    inLst.sort(lambda x,y:multi_attribute_sort(x,y))
    #Now Rank your probes
    rank = 0
    last_group = group_lambda(inLst[0])
    for i in range(len(inLst)):
        rec = inLst[i]
        group = group_lambda(rec)
        if last_group == group: 
            rank+=1
        else:
            rank=1
            last_group = group
        SetRank_Lambda(inLst[i], rank) #This is pure evil!! The lambda purists are gnashing their teeth

Lst = [probe(4, 2.0), probe(4, 0.01), probe(4, 0.9), probe(4, 0.999), probe(4, 0.2), probe(1, 2.0), probe(1, 0.01), probe(1, 0.9), probe(1, 0.999), probe(1, 0.2) ]

RankLst(Lst, group_lambda= lambda x:x.group, sortLambdaLst = [lambda x,y:cmp(x.group, y.group), lambda x,y:cmp(x.score, y.score)], SetRank_Lambda = lambda x, rank:x.set_rank(rank))
print '\t'.join(['group', 'score', 'rank']) 
for r in Lst: print r

While I know many architectures like ASP.NET MVC have built-in functionality to handle JSON.stringify as the contentType my situation is a little different so maybe this may help someone in the future. I know it would have saved me hours!

Since my http requests are being handled by a CGI API from IBM (AS400 environment) on a different subdomain these requests are cross origin, hence the jsonp. I actually send my ajax via javascript object(s). Here is an example of my ajax POST:

 var data = {USER : localProfile,  
        INSTANCE : "HTHACKNEY",  
        PAGE : $('select[name="PAGE"]').val(), 
        TITLE : $("input[name='TITLE']").val(), 
        HTML : html,
        STARTDATE : $("input[name='STARTDATE']").val(), 
        ENDDATE : $("input[name='ENDDATE']").val(),
        ARCHIVE : $("input[name='ARCHIVE']").val(), 
        ACTIVE : $("input[name='ACTIVE']").val(), 
        URGENT : $("input[name='URGENT']").val(), 
        AUTHLST :  authStr};
        //console.log(data);
       $.ajax({
            type: "POST",
           url:   "http://www.domian.com/webservicepgm?callback=?",
           data:  data,
           dataType:'jsonp'
       }).
       done(function(data){
         //handle data.WHATEVER
       });

string firstdayofyear = new DateTime(DateTime.Now.Year, 1, 1).ToString("MM-dd-yyyy");
string lastdayofyear = new DateTime(DateTime.Now.Year, 12, 31).ToString("MM-dd-yyyy");
string firstdayofmonth = new DateTime(DateTime.Now.Year, DateTime.Now.Month, 1).ToString("MM-dd-yyyy");
string lastdayofmonth = new DateTime(DateTime.Now.Year, DateTime.Now.Month, 1).AddMonths(1).AddDays(-1).ToString("MM-dd-yyyy");

I know this is old and answered but I recently had to implement this and decided to make 2 simple jQuery plugins that might help for those interested

usage:

// 1
$('.container').toggleAttr('aria-hidden', "true");
// 2
$('.container').toggleAttrVal('aria-hidden', "true", "false");

1 - Toggles the entire attribute regardless if the original value doesn't match the one you provided.

2 - Toggles the value of the attribute between the 2 provided values.

 // jquery toggle whole attribute
  $.fn.toggleAttr = function(attr, val) {
    var test = $(this).attr(attr);
    if ( test ) { 
      // if attrib exists with ANY value, still remove it
      $(this).removeAttr(attr);
    } else {
      $(this).attr(attr, val);
    }
    return this;
  };

  // jquery toggle just the attribute value
  $.fn.toggleAttrVal = function(attr, val1, val2) {
    var test = $(this).attr(attr);
    if ( test === val1) {
      $(this).attr(attr, val2);
      return this;
    }
    if ( test === val2) {
      $(this).attr(attr, val1);
      return this;
    }
    // default to val1 if neither
    $(this).attr(attr, val1);
    return this;
  };

This is how you would use it in the original example:

$(".list-toggle").click(function() {
    $(".list-sort").toggleAttr('colspan', 6);
});

If you don't want to go down the VBA path, there is this trick from a previous question.

Excel 2010: how to use autocomplete in validation list

It does add some annoying bulk to the top of your sheets, and potential maintenance (should you need more options, adding names of people from a staff list, new projects etc.) but works all the same.

According to this article, != performs faster

http://www.dba-oracle.com/t_not_equal_operator.htm

The whole thing to em is, that the size is relative to the base. So I would say you could keep the font sizes by altering the base.

Example: If you base is 16px, and p is .75em (which is 12px) you would have to raise the base to about 20px. In this case p would then equal about 15px which is the minimum I personally require for mobile phones.

Here's my take at random plain password generation helper.

It ensures that password has numbers, upper and lower case letters as well as a minimum of 3 special characters.

Length of the password will be between 11 and 30.

function plainPassword(): string
{
    $numbers = array_rand(range(0, 9), rand(3, 9));
    $uppercase = array_rand(array_flip(range('A', 'Z')), rand(2, 8));
    $lowercase = array_rand(array_flip(range('a', 'z')), rand(3, 8));
    $special = array_rand(array_flip(['@', '#', '$', '!', '%', '*', '?', '&']), rand(3, 5));

    $password = array_merge(
        $numbers,
        $uppercase,
        $lowercase,
        $special
    );

    shuffle($password);

    return implode($password);
}

Add these lines of code in your htaccess file. I hope it will solve your problem.

<IfModule mod_php5.c>
php_value max_execution_time 259200
</IfModule>

Simplest Understanding for default export is

Export is ES6's feature which is used to Export a module(file) and use it in some other module(file).

Default Export:

1. default export is the convention if you want to export only one object(variable, function, class) from the file(module).
2. There could be only one default export per file, but not restricted to only one export.
3. When importing default exported object we can rename it as well.

Export or Named Export:

1. It is used to export the object(variable, function, calss) with the same name.

2. It is used to export multiple objects from one file.

3. It cannot be renamed when importing in another file, it must have the same name that was used to export it, but we can create its alias by using as operator.

In React, Vue and many other frameworks the Export is mostly used to export reusable components to make modular based applications.

I write a function support dynamic variable string append, like PHP str append: str + str + ... etc.

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdarg.h>

int str_append(char **json, const char *format, ...)
{
    char *str = NULL;
    char *old_json = NULL, *new_json = NULL;

    va_list arg_ptr;
    va_start(arg_ptr, format);
    vasprintf(&str, format, arg_ptr);

    // save old json
    asprintf(&old_json, "%s", (*json == NULL ? "" : *json));

    // calloc new json memory
    new_json = (char *)calloc(strlen(old_json) + strlen(str) + 1, sizeof(char));

    strcat(new_json, old_json);
    strcat(new_json, str);

    if (*json) free(*json);
    *json = new_json;

    free(old_json);
    free(str);

    return 0;
}

int main(int argc, char *argv[])
{
    char *json = NULL;

    str_append(&json, "name: %d, %d, %d", 1, 2, 3);
    str_append(&json, "sex: %s", "male");
    str_append(&json, "end");
    str_append(&json, "");
    str_append(&json, "{\"ret\":true}");

    int i;
    for (i = 0; i < 10; i++) {
        str_append(&json, "id-%d", i);
    }

    printf("%s\n", json);

    if (json) free(json);

    return 0;
}

change parent="android:Theme.Holo.Dark" to parent="android:Theme.Holo"

The holo dark theme is called Holo

slicing operator. http://docs.python.org/tutorial/introduction.html#strings and scroll down a bit

I use the following to create a temp exact as the table but without the identity:

SELECT TOP 0 CONVERT(INT,0)myid,* INTO #temp FROM originaltable

ALTER TABLE #temp DROP COLUMN id

EXEC tempdb.sys.sp_rename N'#temp.myid', N'id', N'COLUMN'

Gets a warning about renames but no big deal. I use this on production class systems. Helps make sure the copy will follow any future table modifications and the temp produced is capable of getting rows additional times within a task. Please note that the PK constraint is also removed - if you need it you can add it at the end.

You can use either of the following:

include "class.twitter.php";

or

require "class.twitter.php";

Using require (or require_once if you want to ensure the class is only loaded once during execution) will cause a fatal error to be raised if the file doesn't exist, whereas include will only raise a warning. See http://php.net/require and http://php.net/include for more details

There is the Jquery alert plugin

$.alerts.okButton = ' Yes ';
$.alerts.cancelButton = ' No ';

After developing for a while, my emulator became brutally slow. I chose wipe user data, and it was much much better. I am guessing that it takes time to load up each APK file you've deployed.

I just added class hide to the div before "card-body" and it hidden by default.

<div id="collapseOne" class="collapse hide" aria-labelledby="headingOne" data-parent="#accordion">

Here's a very concise and recursive solution that allows you to input the size of the output permutations similar to the statistical operator nPr. "5 permutation 3". This allows you to get all possible permutations with a specific size.

function generatePermutations(list, size=list.length) {
    if (size > list.length) return [];
    else if (size == 1) return list.map(d=>[d]); 
    return list.flatMap(d => generatePermutations(list.filter(a => a !== d), size - 1).map(item => [d, ...item]));
}

generatePermutations([1,2,3])

[[1, 2, 3],[1, 3, 2], [2, 1, 3], [2, 3, 1], [3, 1, 2], [3, 2, 1]]

generatePermutations([1,2,3],2)

[[1, 2], [1, 3], [2, 1], [2, 3], [3, 1], [3, 2]]

first install fontawsome using npm

npm install --save @fortawesome/fontawesome-free

add to resources\sass\app.scss

// Fonts
@import '~@fortawesome/fontawesome-free/scss/fontawesome';

and add to resources\js\app.js

require('@fortawesome/fontawesome-free/js/all.js');

then run

npm run dev

or

npm run production

The problem for me was not got the port from process.env.PORT it is very important because Heroku and other services properly do a random port numbers to use.

So that is the code that work for me eventuly :

var app = require('express')();
var http = require('http').createServer(app);
const serverPort = process.env.PORT ; //<----- important 

const io = require('socket.io')(http,{
  cors: {
    origin: '*',
    methods: 'GET,PUT,POST,DELETE,OPTIONS'.split(','),
    credentials: true
  }
});

http.listen(serverPort,()=>{
  console.log(`server listening on port ${serverPort}`)
})

I was facing the same issue, I made below changes and the issue got resolved.

Open watchQueryOptions.d.ts file

\apollo-client\core\watchQueryOptions.d.ts

Change the query type any instead of DocumentNode, Same for mutation

Before:

export interface QueryBaseOptions<TVariables = OperationVariables> {
    query: **DocumentNode**;

After:

export interface QueryBaseOptions<TVariables = OperationVariables> {
    query: **any**;

I ran across this error on a Beaglebone Black using the standard Angstrom distribution. It is currently running Python 2.7.3, but does not include distutils. The solution for me was to install distutils. (It required su privileges.)

    su
    opkg install python-distutils

After that installation, the previously erroring command ran fine.

    python setup.py build

I think this is important to consider for cross-platform execution, i.e. as a CYA. :)

On Windows, 'b' appended to the mode opens the file in binary mode, so there are also modes like 'rb', 'wb', and 'r+b'. Python on Windows makes a distinction between text and binary files; the end-of-line characters in text files are automatically altered slightly when data is read or written. This behind-the-scenes modification to file data is fine for ASCII text files, but it’ll corrupt binary data like that in JPEG or EXE files. Be very careful to use binary mode when reading and writing such files. On Unix, it doesn’t hurt to append a 'b' to the mode, so you can use it platform-independently for all binary files.

This is directly quoted from Python Software Foundation 2.7.x.

Handy one-liner

pkl() (
  python -c 'import pickle,sys;d=pickle.load(open(sys.argv[1],"rb"));print(d)' "$1"
)
pkl my.pkl

Will print __str__ for the pickled object.

The generic problem of visualizing an object is of course undefined, so if __str__ is not enough, you will need a custom script.

Website URL:

http://www.example.com/?id=2

Code:

$id = intval($_GET['id']);
$results = mysql_query("SELECT * FROM next WHERE id=$id");    
while ($row = mysql_fetch_array($results))     
{       
    $url = $row['url'];
    echo $url; //Outputs: 2
}

similar to the rest, but more specific:

    table.borderless td,table.borderless th{
     border: none !important;
}

For example,

package main

import "fmt"

func main() {
    type Map1 map[string]interface{}
    type Map2 map[string]int
    m := Map1{"foo": Map2{"first": 1}, "boo": Map2{"second": 2}}
    //m = map[foo:map[first: 1] boo: map[second: 2]]
    fmt.Println("m:", m)
    for k, v := range m {
        fmt.Println("k:", k, "v:", v)
    }
}

Output:

m: map[boo:map[second:2] foo:map[first:1]]
k: boo v: map[second:2]
k: foo v: map[first:1]

You can use inline css :
<td style = "text-align: center;">

It seems that since XCode 7.x a lot of warnings are coming out when enabling clang module with CLANG_ENABLE_MODULES

Take a look at Lots of warnings when building with Xcode 7 with 3rd party libraries

#include <opencv2/imgproc/imgproc.hpp>
#include <opencv2/highgui/highgui.hpp>

#include <iostream>
#include <iomanip>

using namespace cv;
using namespace std;

int main(int argc, char** argv)
{
    double data[4] = {-0.0000000077898273846583732, -0.03749374753019832, -0.0374787251930463, -0.000000000077893623846343843};
    Mat src = Mat(1, 4, CV_64F, &data);
    for(int i=0; i<4; i++)
        cout << setprecision(3) << src.at<double>(0,i) << endl;

    return 0;
}

Anyone looking for a quick Vue file component, here you go:

// WindowUrl.vue

<template>
    <a :href="url" :class="classes" @click="open">
        <slot></slot>
    </a>
</template>

<script>
    export default {
        props: {
            url: String,
            width: String,
            height: String,
            classes: String,
        },
        methods: {
            open(e) {
                // Prevent the link from opening on the parent page.
                e.preventDefault();

                window.open(
                    this.url,
                    'targetWindow',
                    `toolbar=no,location=no,status=no,menubar=no,scrollbars=no,resizable=yes,width=${this.width},height=${this.height}`
                );
            }
        }
    }
</script>

Usage:

<window-url url="/print/shipping" class="btn btn-primary" height="250" width="250">
    Print Shipping Label
</window-url>

I was struggle with this behavior too. I wanted to change div class in jinja based on counter. I was surprised that pythonic way did not work. Following code was reseting my counter on each iteration, so I had only red class.

{% if sloupec3: %}
    {% set counter = 1 %}
    {% for row in sloupec3: %}
        {% if counter == 3 %}
            {% set counter = 1 %}        
        {% endif %} 

        {% if  counter == 1: %}
           <div class="red"> some red div </div>
        {% endif %} 

        {% if counter == 2: %}
           <div class="gray"> some gray div </div>
        {% endif %} 

        {% set counter = counter + 1 %} 

    {% endfor %}

{% endif %}

I used loop.index like this and it works:

{% if sloupec3: %}

    {% for row in sloupec3: %} 

        {% if  loop.index % 2 == 1: %}
           <div class="red"> some red div </div>
        {% endif %} 

        {% if loop.index % 2 == 0: %}
           <div class="gray"> some gray div </div>
        {% endif %}  

    {% endfor %}

{% endif %}

I know this is an old question but I stumbled upon this recently and it ended up misguiding me since the Subprocess API as changed since python 3.5.

The new way to execute external scripts is with the run function, which runs the command described by args. Waits for command to complete, then returns a CompletedProcess instance.

import subprocess

subprocess.run(['./test.sh'])

To get past INSTALL_FAILED_MISSING_SHARED_LIBRARY error with Google Maps for Android:

1. Install Google map APIs. This can be done in Eclipse Windows/Android SDK and AVD Manager -> Available Packages -> Third Party Add-ons -> Google Inc. -> Google APIs by Google Inc., Android API X

2. From command line create new AVD. This can be done by listing targets (android list targets), then android create avd -n new_avd_api_233 -t "Google Inc.:Google APIs:X"

3. Then create AVD (Android Virtual Device) in Eclipse Windows/Android SDK and AVD Manager -> New... -> (Name: new_avd_X, Target: Google APIs (Google Inc.) - API Level X)

   IMPORTANT : You must create your AVD with Target as Google APIs (Google Inc.) otherwise it will again failed.

4. Create Android Project in Eclipse File/New/Android Project and select Google APIs Build Target.

5. add <uses-library android:name="com.google.android.maps" /> between <application> </application> tags.

6. Run Project as Android Application.

If error persists, then you still have problems, if it works, then this error is forever behind you.

Here's my version

import requests

try:
    if requests.get('https://google.com').ok:
        print("You're Online")
except:
    print("You're Offline")

You can do it right in your XML file:

android:onClick="@drawable/ic_action_search"

You can also remove the line

  require: 'ngModel',

if you don't need ngModel in this directive. Removing ngModel will allow you to make a directive without thatngModel error.

You can use the --append feature of tee:

cat file01.txt | tee --append bothFiles.txt 
cat file02.txt | tee --append bothFiles.txt 

Or shorter,

cat file01.txt file02.txt | tee --append bothFiles.txt 

I assume the request for no redirection (>>) comes from the need to use this in xargs or similar. So if that doesn't count, you can mute the output with >/dev/null.

I'd say you are right, in my own words;

Architecture is the allocation of system requirements to system elements. Four statements about an architecture:

1. It can introduce non-functional requirements like language or patterns.
2. It defines the interaction between components, interfaces, timing, etc.
3. It shall not introduce new functionality,
4. It allocates the (designed) functions that the system is intended to perform to elements.

Architecture is an essential engineering step when a complexity of the system is subdivided.

Example: Think about your house, you don't need an architect for your kitchen (only one element involved) but the complete building needs some interaction definitions, like doors, and a roof.

Design is a informative representation of the (proposed) implementation of the function. It is intended to elicit feedback and to discuss with stakeholders. It might be good practice but is not an essential engineering step.

It would be nice to see the kitchen design see before the kitchen is installed but it is not essential for the cooking requirement:

If I think about it you can state:

• architecture is for a public/engineers on a more detailed abstraction level
• design is intended for public on a less detailed abstraction level

Use a div for your divider. It will always be centered vertically regardless to whether left and right divs are equal in height. You can reuse it anywhere on your site.

.divider{
    position:absolute;
    left:50%;
    top:10%;
    bottom:10%;
    border-left:1px solid white;
}

Check working example at http://jsfiddle.net/gtKBs/

Yes you can! For a simple repository that only publish/retrieve artifacts, you can use nginx.

1. Make sure nginx has http dav module enabled, it should, but nonetheless verify it.

2. Configure nginx http dav module:

   In Windows: d:\servers\nginx\nginx.conf

   location / {
       # maven repository
       dav_methods  PUT DELETE MKCOL COPY MOVE;
       create_full_put_path  on;
       dav_access  user:rw group:rw all:r;
   }
   

   In Linux (Ubuntu): /etc/nginx/sites-available/default

   location / {
           # First attempt to serve request as file, then
           # as directory, then fall back to displaying a 404.
           # try_files $uri $uri/ =404;  # IMPORTANT comment this
           dav_methods  PUT DELETE MKCOL COPY MOVE;
           create_full_put_path  on;
           dav_access  user:rw group:rw all:r;
   }
   

   Don't forget to give permissions to the directory where the repo will be located:

   sudo chmod +777 /var/www/html/repository

3. In your project's pom.xml add the respective configuration:

   Retrieve artifacts:

   <repositories>
       <repository>
           <id>repository</id>
           <url>http://<your.ip.or.hostname>/repository</url>
       </repository>
   </repositories>
   

   Publish artifacts:

   <build>
       <extensions>
           <extension>
               <groupId>org.apache.maven.wagon</groupId>
               <artifactId>wagon-http</artifactId>
               <version>3.2.0</version>
           </extension>
       </extensions>
   </build>
   <distributionManagement>
       <repository>
           <id>repository</id>
           <url>http://<your.ip.or.hostname>/repository</url>
       </repository>
   </distributionManagement>
   

4. To publish artifacts use mvn deploy. To retrieve artifacts, maven will do it automatically.

And there you have it a simple maven repo.

Whilst you can of course use the base64 module, you can also to use the codecs module (referred to in your error message) for binary encodings (meaning non-standard & non-text encodings).

For example:

import codecs
my_bytes = b"Hello World!"
codecs.encode(my_bytes, "base64")
codecs.encode(my_bytes, "hex")
codecs.encode(my_bytes, "zip")
codecs.encode(my_bytes, "bz2")

This can come in useful for large data as you can chain them to get compressed and json-serializable values:

my_large_bytes = my_bytes * 10000
codecs.decode(
    codecs.encode(
        codecs.encode(
            my_large_bytes,
            "zip"
        ),
        "base64"),
    "utf8"
)

Refs:

• https://docs.python.org/3/library/codecs.html#binary-transforms
• https://docs.python.org/3/library/codecs.html#standard-encodings
• https://docs.python.org/3/library/codecs.html#text-encodings

I couldnt get previous solution to work but I found out that if I set the iframe scr with for example http:otherdomain.com/page.htm?from=thisdomain.com/thisfolder then I could, in the iframe extract thisdomain.com/thisfolder by using following javascript:

var myString = document.location.toString();
var mySplitResult = myString.split("=");
fromString = mySplitResult[1];

I have also used following link as others have suggested you for bluetooth communication.

http://developer.android.com/guide/topics/connectivity/bluetooth.html

The thing is all you need is a class BluetoothChatService.java

this class has following threads:

1. Accept
2. Connecting
3. Connected

Now when you call start function of the BluetoothChatService like:

mChatService.start();

It starts accept thread which means it will start looking for connection.

Now when you call

mChatService.connect(<deviceObject>,false/true);

Here first argument is device object that you can get from paired devices list or when you scan for devices you will get all the devices in range you can pass that object to this function and 2nd argument is a boolean to make secure or insecure connection.

connect function will start connecting thread which will look for any device which is running accept thread.

When such a device is found both accept thread and connecting thread will call connected function in BluetoothChatService:

connected(mmSocket, mmDevice, mSocketType);

this method starts connected thread in both the devices: Using this socket object connected thread obtains the input and output stream to the other device. And calls read function on inputstream in a while loop so that it's always trying read from other device so that whenever other device send a message this read function returns that message.

BluetoothChatService also has a write method which takes byte[] as input and calls write method on connected thread.

mChatService.write("your message".getByte());

write method in connected thread just write this byte data to outputsream of the other device.

public void write(byte[] buffer) {
   try {
       mmOutStream.write(buffer);
    // Share the sent message back to the UI Activity
    // mHandler.obtainMessage(
    // BluetoothGameSetupActivity.MESSAGE_WRITE, -1, -1,
    // buffer).sendToTarget();
    } catch (IOException e) {
    Log.e(TAG, "Exception during write", e);
     }
}

Now to communicate between two devices just call write function on mChatService and handle the message that you will receive on the other device.

Try this:

<button (click)="click()">Click me</button>

<input class="txt" type="password" [(ngModel)]="input_pw" [ngClass]="{'hidden': isHidden}" />

component.ts:

isHidden: boolean = false;
click(){
    this.isHidden = !this.isHidden;
}

Neither above helped me, instead, I connected my phone through the back USB hubs (I used forward USB hubs previously), and this helped me!

If the element you're analyzing does not have any margin, border or whatsoever defined you won't be able to return it. At tops you'll be able to get 'auto' which is normally the default.

From your example I can see that you have margT as variable. Not sure if're trying to get margin-top. If that's the case you should be using .css('margin-top').

You're also trying to get the stylization from 'img' which will result (if you have more than one) in an array.

What you should do is use the .each() jquery method.

For example:

jQuery('img').each(function() {
    // get margin top
    var margT = jQuery(this).css('margin-top');

    // Do something with margT
});

I was parsing JSON from a REST API call and got this error. It turns out the API had become "fussier" (eg about order of parameters etc) and so was returning malformed results. Check that you are getting what you expect :)

You need a dict:

my_dict = {'cheese': 'cake'}

Example code (from the docs):

>>> a = dict(one=1, two=2, three=3)
>>> b = {'one': 1, 'two': 2, 'three': 3}
>>> c = dict(zip(['one', 'two', 'three'], [1, 2, 3]))
>>> d = dict([('two', 2), ('one', 1), ('three', 3)])
>>> e = dict({'three': 3, 'one': 1, 'two': 2})
>>> a == b == c == d == e
True

You can read more about dictionaries here.

Convert String to Int

var myInt = int.parse('12345');
assert(myInt is int);
print(myInt); // 12345
print(myInt.runtimeType);

Convert String to Double

var myDouble = double.parse('123.45');
assert(myInt is double);
print(myDouble); // 123.45
print(myDouble.runtimeType);

Example in DartPad

You need to go to user accounts and enable Guest Account, its default disabled. Once you do this, you share any folder and add the guest account to the list of users who can accesss that specific folder, this also includes to Turn off password Protected Sharing in 'Advanced Sharing Settings'

The other way to do this where you only enter a password once is to join a Homegroup. if you have a network of 2 or more computers, they can all connect to a homegroup and access all the files they need from each other, and anyone outside the group needs a 1 time password to be able to access your network, this was introduced in windows 7.

The default password is empty. More accurately, you don't even NEED a password to login as root on the localhost. You just need to BE root. But if you need to set the password the first time (if you allow remote access to root), you need to use:

sudo mysql_secure_installation

Enter empty password, then follow the instructions.

The problem you are having is that you need to BE root when you try to login as root from the local machine.

On Linux: mariadb will accept a connection as root on the socket (localhost) ONLY IF THE USER ASKING IT IS ROOT. Which means that even if you try

mysql -u root -p

And have the correct password you will be refused access. Same goes for

mysql_secure_installation

Mariadb will always refuse the password because the current user is not root. So you need to call them with sudo (or as the root user on your machine) So locally you just want to use:

sudo mysql

and

sudo mysql_secure_installation

When moving from mysql to mariadb it took I will for me to figure this out.

It's really not that big of a deal. You could just make a script with the single command:

chmod a+x *.pl

And run the script after creating a perl file. Alternatively, you could open a file with a command like this:

touch filename.pl && chmod a+x filename.pl && vi filename.pl # choose your favorite editor

Alternatively, you can pass an empty tick position and label as

# for matplotlib.pyplot
# ---------------------
plt.xticks([], [])
# for axis object
# ---------------
# from Anakhand May 5 at 13:08
# for major ticks
ax.set_xticks([])
# for minor ticks
ax.set_xticks([], minor=True)

if someone still search for this, i do this:

import fs from 'fs';_x000D_
import path from 'path';_x000D_
_x000D_
const getAllFiles = dir =>_x000D_
    fs.readdirSync(dir).reduce((files, file) => {_x000D_
        const name = path.join(dir, file);_x000D_
        const isDirectory = fs.statSync(name).isDirectory();_x000D_
        return isDirectory ? [...files, ...getAllFiles(name)] : [...files, name];_x000D_
    }, []);

and its work very good for me

If you don't want line numbers shown all the time another way to find the line number of a piece of code is to just click in the left-most margin and create a breakpoint (a small blue arrow appears) then go to the breakpoint navigator (?7) where it will list the breakpoint with its line number. You can delete the breakpoint by right clicking on it.

You can solve your problem like below bunch of codes

public class Response
{
    public string loopa { get; set; }
    public string drupa{ get; set; }
    public Image[] images { get; set; }
}

public class RootObject<T>
    {
        public List<T> response{ get; set; }

    }

var des = (RootObject<Response>)Newtonsoft.Json.JsonConvert.DeserializeObject(Your JSon String, typeof(RootObject<Response>));

you have to call a function before it can return anything.

function mainFunction() {
      function subFunction() {
            var str = "foo";
            return str;
      }
      return subFunction();
}

var test = mainFunction();
alert(test);

Or:

function mainFunction() {
      function subFunction() {
            var str = "foo";
            return str;
      }
      return subFunction;
}

var test = mainFunction();
alert( test() );

for your actual code. The return should be outside, in the main function. The callback is called somewhere inside the getLocations method and hence its return value is not recieved inside your main function.

function reverseGeocode(latitude,longitude){
    var address = "";
    var country = "";
    var countrycode = "";
    var locality = "";

    var geocoder = new GClientGeocoder();
    var latlng = new GLatLng(latitude, longitude);

    geocoder.getLocations(latlng, function(addresses) {
     address = addresses.Placemark[0].address;
     country = addresses.Placemark[0].AddressDetails.Country.CountryName;
     countrycode = addresses.Placemark[0].AddressDetails.Country.CountryNameCode;
     locality = addresses.Placemark[0].AddressDetails.Country.AdministrativeArea.SubAdministrativeArea.Locality.LocalityName;
    });   
    return country
   }

Your answer is Wi-Fi direct which is made available with ICS. Here is a link for explanation in Android doc

Spring Boot seems had changed the way of reading the VM options as it evolves. Here's some way to try when you launch an application in Intellij and want to active some profile:

1. Change VM options

Open "Edit configuration" in "Run", and in "VM options", add: -Dspring.profiles.active=local

It actually works with one project of mine with Spring Boot v2.0.3.RELEASE and Spring v5.0.7.RELEASE, but not with another project with Spring Boot v2.1.1.RELEASE and Spring v5.1.3.RELEASE.

Also, when running with Maven or JAR, people mentioned this:

mvn spring-boot:run -Drun.profiles=dev

or

java -jar -Dspring.profiles.active=dev XXX.jar

(See here: how to use Spring Boot profiles)

2. Passing JVM args

It is mentioned somewhere, that Spring changes the way of launching the process of applications if you specify some JVM options; it forks another process and will not pass the arg it received so this does not work. The only way to pass args to it, is:

mvn spring-boot:run -Dspring-boot.run.jvmArguments="..."

Again, this is for Maven. https://docs.spring.io/spring-boot/docs/current/maven-plugin/examples/run-debug.html

3. Setting (application) env var

What works for me for the second project, was setting the environment variable, as mentioned in some answer above: "Edit configuration" - "Environment variable", and:

SPRING_PROFILES_ACTIVE=local

Don't forget that an activity is application's block/component which can be shared and started through Intent! So each activity in your application should solve only one kind of task. If you have only one task in your application then I think you need only one activity and many fragments if needed. Of course you can reuse fragments in future activities which solve another tasks. This approach will be clear and logical separation of tasks. And you no need to maintain one activity with different intent filter parameters for different sets of fragments. You define tasks at the design stage of the development process based on requirements.

For bootstrap 4, to expand on @helloroy's answer I used the following;-

var modal_lv = 0 ;
$('body').on('shown.bs.modal', function(e) {
    if ( modal_lv > 0 )
    {
        $('.modal-backdrop:last').css('zIndex',1050+modal_lv) ;
        $(e.target).css('zIndex',1051+modal_lv) ;
    }
    modal_lv++ ;
}).on('hidden.bs.modal', function() {
    if ( modal_lv > 0 )
        modal_lv-- ;
});

The advantage of the above is that it won't have any effect when there is only one modal, it only kicks in for multiples. Secondly, it delegates the handling to the body to ensure future modals which are not currently generated are still catered for.

Update

Moving to a js/css combined solution improves the look - the fade animation continues to work on the backdrop;-

var modal_lv = 0 ;
$('body').on('show.bs.modal', function(e) {
    if ( modal_lv > 0 )
        $(e.target).css('zIndex',1051+modal_lv) ;
    modal_lv++ ;
}).on('hidden.bs.modal', function() {
    if ( modal_lv > 0 )
        modal_lv-- ;
});

combined with the following css;-

.modal-backdrop ~ .modal-backdrop
{
    z-index : 1051 ;
}
.modal-backdrop ~ .modal-backdrop ~ .modal-backdrop
{
    z-index : 1052 ;
}
.modal-backdrop ~ .modal-backdrop ~ .modal-backdrop ~ .modal-backdrop
{
    z-index : 1053 ;
}

This will handle modals nested up to 4 deep which is more than I need.

The easiest way to get the correct number of hours between two dates (datetimes), even across daylight saving time changes, is to use the difference in Unix timestamps. Unix timestamps are seconds elapsed since 1970-01-01T00:00:00 UTC, ignoring leap seconds (this is OK because you probably don't need this precision, and because it's quite difficult to take leap seconds into account).

The most flexible way to convert a datetime string with optional timezone information into a Unix timestamp is to construct a DateTime object (optionally with a DateTimeZone as a second argument in the constructor), and then call its getTimestamp method.

$str1 = '2006-04-12 12:30:00'; 
$str2 = '2006-04-14 11:30:00';
$tz1 = new DateTimeZone('Pacific/Apia');
$tz2 = $tz1;
$d1 = new DateTime($str1, $tz1); // tz is optional,
$d2 = new DateTime($str2, $tz2); // and ignored if str contains tz offset
$delta_h = ($d2->getTimestamp() - $d1->getTimestamp()) / 3600;
if ($rounded_result) {
   $delta_h = round ($delta_h);
} else if ($truncated_result) {
   $delta_h = intval($delta_h);
}
echo "?h: $delta_h\n";

char means exactly one character. You can't assign zero characters to this type.

That means that there is no char value for which String.replace(char, char) would return a string with a diffrent length.

The Header field of the Request is public. You may do this :

req.Header.Set("name", "value")

First you compile the regex, then you have to use it with match, find, or some other method to actually run it against some input.

import os
import re
import shutil

def test():
    os.chdir("C:/Users/David/Desktop/Test/MyFiles")
    files = os.listdir(".")
    os.mkdir("C:/Users/David/Desktop/Test/MyFiles2")
    pattern = re.compile(regex_txt, re.IGNORECASE)
    for x in (files):
        with open((x), 'r') as input_file:
            for line in input_file:
                if pattern.search(line):
                    shutil.copy(x, "C:/Users/David/Desktop/Test/MyFiles2")
                    break

Try this:

select distinct a.FirstName, a.LastName, v.District
from AddTbl a 
  inner join ValTbl v
  on a.LastName = v.LastName
order by a.FirstName;

Or this (it does the same, but the syntax is different):

select distinct a.FirstName, a.LastName, v.District
from AddTbl a, ValTbl v
where a.LastName = v.LastName
order by a.FirstName;

Using psql, on linux host that have connectivity to both servers

( export PGPASSWORD=password1 
  psql -U user1 -h host1 database1 \
  -c "copy (select field1,field2 from table1) to stdout with csv" ) \
| 
( export PGPASSWORD=password2 
  psql -U user2 -h host2 database2 \ 
   -c "copy table2 (field1, field2) from stdin csv" )

That TypeError only appears when you try to pass int() None (which is the only NoneType value, as far as I know). I would say that your real goal should not be to convert NoneType to int or str, but to figure out where/why you're getting None instead of a number as expected, and either fix it or handle the None properly.

I wanted to combine a couple of posts to make a full answer of this since it does appear to be a few steps.

1. Above advice by @madtracey

/etc/mysql/my.cnf or /etc/mysql/mysql.conf.d/mysqld.cnf

[mysql]
default-character-set=utf8mb4

[mysqld_safe]
socket          = /var/run/mysqld/mysqld.sock
nice            = 0

[mysqld]
##
character-set-server=utf8mb4
collation-server=utf8mb4_unicode_ci
init_connect='SET NAMES utf8mb4'
sql_mode=STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION

Again from advice above all jdbc connections had characterEncoding=UTF-8and characterSetResults=UTF-8 removed from them

With this set -Dfile.encoding=UTF-8 appeared to make no difference.

I could still not write international text into db getting same failure as above

Now using this how-to-convert-an-entire-mysql-database-characterset-and-collation-to-utf-8

Update all your db to use utf8mb4

ALTER DATABASE YOURDB CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;

Run this query that gives you what needs to be rung

SELECT CONCAT(
'ALTER TABLE ',  table_name, ' CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;  ', 
'ALTER TABLE ',  table_name, ' CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_unicode_ci;  ')
FROM information_schema.TABLES AS T, information_schema.`COLLATION_CHARACTER_SET_APPLICABILITY` AS C
WHERE C.collation_name = T.table_collation
AND T.table_schema = 'YOURDB'
AND
(C.CHARACTER_SET_NAME != 'utf8mb4'
    OR
 C.COLLATION_NAME not like 'utf8mb4%')

Copy paste output in editor replace all | with nothing post back into mysql when connected to correct db.

That is all that had to be done and all seems to work for me. Not the -Dfile.encoding=UTF-8 is not enabled and it appears to work as expected

E2A Still having an issue ? I certainly am in production so it turns out you do need to check over what has been done by above, since it sometimes does not work, here is reason and fix in this scenario:

show create table user

  `password` varchar(255) CHARACTER SET latin1 NOT NULL,
  `username` varchar(255) CHARACTER SET latin1 NOT NULL,

You can see some are still latin attempting to manually update the record:

ALTER TABLE user CONVERT TO CHARACTER SET utf8mb4;
ERROR 1071 (42000): Specified key was too long; max key length is 767 bytes

So let's narrow it down:

mysql> ALTER TABLE user change username username varchar(255) CHARACTER SET utf8mb4 not NULL;
ERROR 1071 (42000): Specified key was too long; max key length is 767 bytes
mysql> ALTER TABLE user change username username varchar(100) CHARACTER SET utf8mb4 not NULL;
Query OK, 5 rows affected (0.01 sec)

In short I had to reduce the size of that field in order to get the update to work.

Now when I run:

mysql> ALTER TABLE user CONVERT TO CHARACTER SET utf8mb4;
Query OK, 5 rows affected (0.01 sec)
Records: 5  Duplicates: 0  Warnings: 0

It all works

You declared them but did not provide them with an intial value - thus, they're unintialized. Try something like:

public static Rand searchCount (int[] x)  
{ 
  int a = 0 ;  
  int b = 0 ; 

and the warnings should go away.

Here is dirty way:

1. Log into a linux server using "ssh -X user@host"
2. open rxvt-unicode or other X terminal.
3. open tmux or screen
4. Log back into your local computer from the server
5. start your favourite shell such as msys or cygwin.

<div>
    <iframe id="myFrame" src="https://player.vimeo.com/video/12345678?autoplay=1" width="640" height="360" frameborder="0" allowfullscreen> . 
    </iframe>
</div>

<script>
    function myFunction() {
        var wscreen = window.innerWidth;
        var hscreen = window.innerHeight;

        document.getElementById("myFrame").width = wscreen ;
        document.getElementById("myFrame").height = hscreen ;
    }

    myFunction();

    window.addEventListener('resize', function(){ myFunction(); });
</script>

this works on Vimeo adding an id myFrame to the iframe

Answer

Convert the UTC datetime to America/Denver

// create a $dt object with the UTC timezone
$dt = new DateTime('2016-12-12 12:12:12', new DateTimeZone('UTC'));

// change the timezone of the object without changing it's time
$dt->setTimezone(new DateTimeZone('America/Denver'));

// format the datetime
$dt->format('Y-m-d H:i:s T');

Notes

time() returns the unix timestamp, which is a number, it has no timezone.

date('Y-m-d H:i:s T') returns the date in the current locale timezone.

gmdate('Y-m-d H:i:s T') returns the date in UTC

date_default_timezone_set() changes the current locale timezone

to change a time in a timezone

// create a $dt object with the America/Denver timezone
$dt = new DateTime('2016-12-12 12:12:12', new DateTimeZone('America/Denver'));

// change the timezone of the object without changing it's time
$dt->setTimezone(new DateTimeZone('UTC'));

// format the datetime
$dt->format('Y-m-d H:i:s T');

here you can see all the available timezones

https://en.wikipedia.org/wiki/List_of_tz_database_time_zones

here are all the formatting options

http://php.net/manual/en/function.date.php

Update PHP timezone DB (in linux)

sudo pecl install timezonedb

You can also use:

{{ word|striptags('<b>')|raw }}

so that only <b> tag will be allowed.

i think the problem is that there is no data in the success-function because the request breaks up with an 401 error in your case and thus has no success.

if you use

$.ajax({
        url: "https://app.asana.com/-/api/0.1/workspaces/",
        type: 'GET',
         error: function (xhr, ajaxOptions, thrownError) {
    alert(xhr.status);
    alert(thrownError);
  }
    });

there will be your 401 code i think (this link says so)

There are two ways to tackle dynamic csv lists for TSQL queries:

1) Using an inner select

SELECT * FROM myTable WHERE myColumn in (SELECT id FROM myIdTable WHERE id > 10)

2) Using dynamically concatenated TSQL

DECLARE @sql varchar(max)  
declare @list varchar(256)  
select @list = '1,2,3'  
SELECT @sql = 'SELECT * FROM myTable WHERE myColumn in (' + @list + ')'

exec sp_executeSQL @sql

3) A possible third option is table variables. If you have SQl Server 2005 you can use a table variable. If your on Sql Server 2008 you can even pass whole table variables in as a parameter to stored procedures and use it in a join or as a subselect in the IN clause.

DECLARE @list TABLE (Id INT)

INSERT INTO @list(Id)
SELECT 1 UNION ALL SELECT 2 UNION ALL SELECT 3 UNION ALL SELECT 4


SELECT
    * 
FROM 
    myTable
    JOIN @list l ON myTable.myColumn = l.Id

SELECT
    * 
FROM 
    myTable
WHERE
    myColumn IN (SELECT Id FROM @list)

code:

// Create Directory if not exist then Copy a file.


public static void copyFile_Directory(String origin, String destDir, String destination) throws IOException {

    Path FROM = Paths.get(origin);
    Path TO = Paths.get(destination);
    File directory = new File(String.valueOf(destDir));

    if (!directory.exists()) {
        directory.mkdir();
    }
        //overwrite the destination file if it exists, and copy
        // the file attributes, including the rwx permissions
     CopyOption[] options = new CopyOption[]{
                StandardCopyOption.REPLACE_EXISTING,
                StandardCopyOption.COPY_ATTRIBUTES

        };
        Files.copy(FROM, TO, options);


}

There is a way of doing this with tags, which allows for multiple defaults.

Assume you have the following struct, with 2 default tags default0 and default1.

type A struct {
   I int    `default0:"3" default1:"42"`
   S string `default0:"Some String..." default1:"Some Other String..."`
}

Now it's possible to Set the defaults.

func main() {

ptr := &A{}

Set(ptr, "default0")
fmt.Printf("ptr.I=%d ptr.S=%s\n", ptr.I, ptr.S)
// ptr.I=3 ptr.S=Some String...

Set(ptr, "default1")
fmt.Printf("ptr.I=%d ptr.S=%s\n", ptr.I, ptr.S)
// ptr.I=42 ptr.S=Some Other String...
}

Here's the complete program in a playground.

If you're interested in a more complex example, say with slices and maps, then, take a look at creasty/defaultse

In case someone wanted an example using variables...

#!/bin/bash

# Only continue for 'develop' or 'release/*' branches
BRANCH_REGEX="^(develop$|release//*)"

if [[ $BRANCH =~ $BRANCH_REGEX ]];
then
    echo "BRANCH '$BRANCH' matches BRANCH_REGEX '$BRANCH_REGEX'"
else
    echo "BRANCH '$BRANCH' DOES NOT MATCH BRANCH_REGEX '$BRANCH_REGEX'"
fi

this will work for me:

SELECT REPLACE(SUBSTRING(COLUMN_TYPE,6,(LENGTH(COLUMN_TYPE)-6)),"'","")
FROM information_schema.COLUMNS
WHERE TABLE_SCHEMA='__TABLE_SCHEMA__' 
AND TABLE_NAME='__TABLE_NAME__'
AND COLUMN_NAME='__COLUMN_NAME__'

and then

explode(',', $data)

$('#divID').css("background-image", "url(/myimage.jpg)");  

Should do the trick, just hook it up in a click event on the element

$('#divID').click(function()
{
  // do my image switching logic here.
});

Don't get confused with the concepts of Angular and RxJS

We have pipes concept in Angular and pipe() function in RxJS.

1) Pipes in Angular: A pipe takes in data as input and transforms it to the desired output
https://angular.io/guide/pipes

2) pipe() function in RxJS: You can use pipes to link operators together. Pipes let you combine multiple functions into a single function.

The pipe() function takes as its arguments the functions you want to combine, and returns a new function that, when executed, runs the composed functions in sequence.
https://angular.io/guide/rx-library (search for pipes in this URL, you can find the same)

So according to your question, you are referring pipe() function in RxJS

$("#myDiv").hide();

will set the css display to none. if you need to set visibility to hidden as well, could do this via

$("#myDiv").css("visibility", "hidden");

or combine both in a chain

$("#myDiv").hide().css("visibility", "hidden");

or write everything with one css() function

$("#myDiv").css({
  display: "none",
  visibility: "hidden"
});

Android resources have pretty good HTML markup support
The below HTML elements are supported:

Bold: <b>, <em>
Italic: <i>, <cite>, <dfn>
25% larger text: <big>
20% smaller text: <small>
Setting font properties: <font face=”font_family“ color=”hex_color”>. Examples of possible font families include monospace, serif, and sans_serif.
Setting a monospace font family: <tt>
Strikethrough: <s>, <strike>, <del>
Underline: <u>
Superscript: <sup>
Subscript: <sub>
Bullet points: <ul>, <li>
Line breaks: <br>
Division: <div>
CSS style: <span style=”color|background_color|text-decoration”>
Paragraphs: <p dir=”rtl | ltr” style=”…”>

Note however that it's not rendered in android studio layouts preview. Last tested on Android Studio 3.3.1

For example, the Strikethrough will look like that:

<string name="cost"><strike>$10</strike> $5 a month</string>

If saving enums as strings in the database, you can create utility methods to (de)serialize any enum:

   public static String getSerializedForm(Enum<?> enumVal) {
        String name = enumVal.name();
        // possibly quote value?
        return name;
    }

    public static <E extends Enum<E>> E deserialize(Class<E> enumType, String dbVal) {
        // possibly handle unknown values, below throws IllegalArgEx
        return Enum.valueOf(enumType, dbVal.trim());
    }

    // Sample use:
    String dbVal = getSerializedForm(Suit.SPADE);
    // save dbVal to db in larger insert/update ...
    Suit suit = deserialize(Suit.class, dbVal);

I am using Laravel 7.x with blade templating and I use:

<input ... max="{{ now()->toDateString('Y-m-d') }}">

String text = "Example";
EditText edtText = (EditText) findViewById(R.id.edtText);
edtText.setText(text);

Check it out EditText accept only String values if necessary convert it to string.

If int, double, long value, do:

String.value(value);

There is no "absolute path for a file existing in the asset folder". The content of your project's assets/ folder are packaged in the APK file. Use an AssetManager object to get an InputStream on an asset.

For WebView, you can use the file Uri scheme in much the same way you would use a URL. The syntax for assets is file:///android_asset/... (note: three slashes) where the ellipsis is the path of the file from within the assets/ folder.

I just took the helper-function from Xander and improved it with the answers before:

function last($array){
  $keys = array_keys($array);
  return end($keys);
}


$arr = array("one" => "apple", "two" => "orange", "three" => "pear");    
echo last($arr);
echo $arr(last($arr));

You can try like this :

input[placeholder] {
   text-align: center;
}

I would recommend creating a TNSNAMES.ORA file. From your Oracle Client install directory, navigate to NETWORK\ADMIN. You may already have a file called TNSNAMES.ORA, if so edit it, else create it using your favorite text editor.

Next, simply add an entry like this:

MYDB =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 123.45.67.89)(PORT = 1521))
    (CONNECT_DATA = (SID = TEST)(SERVER = DEDICATED))
  )

You can change MYDB to whatever you like, this is the identifier that applications will will use to find the database using the info from TNSNAMES.

Finally, login with MYDB as your database in PL/SQL Developer. It should automatically find the connection string in the TNSNAMES.ORA.

If that does not work, hit Help->About then click the icon with an "i" in it in the upper-lefthand corner. The fourth tab is the "TNS Names" tab, check it to confirm that it is loading the proper TNSNAMES.ORA file. If it is not, you may have multiple Oracle installations on your computer, and you will need to find the one that is in use.

Although the question specifically describes installing 2.6, I would like to add some importants points to the excellent answers above in case someone comes across this. For the record, my case was that I was trying to install 2.7 on an ubuntu 10.04 box.

First, my motivation towards the methods described in all the answers here is that installing Python from deadsnake's ppa's has been a total failure. So building a local Python is the way to go.

Having tried so, I thought relying to the default installation of pip (with sudo apt-get install pip) would be adequate. This unfortunately is wrong. It turned out that I was getting all shorts of nasty issues and eventually not being able to create a virtualenv.

Therefore, I highly recommend to install pip locally with wget https://raw.github.com/pypa/pip/master/contrib/get-pip.py && python get-pip.py --user. This related question gave me this hint.

Now if this doesn't work, make sure that libssl-dev for Ubuntu or openssl-dev for CentOS is installed. Install them with apt-get or yum and then re-build Python (no need to remove anything if already installed, do so on top). get-pip complains about that, you can check so by running import ssl on a py shell.

Last, don't forget to declare .local/bin and local python to path, check with which pip and which python.

If you are looking to style a file input element, look at open file dialog box in javascript. If you are looking to grab the files associated with a file input element, you must do something like this:

inputElement.onchange = function(event) {
   var fileList = inputElement.files;
   //TODO do something with fileList.  
}

See this MDN article for more info on the FileList type.

Note that the code above will only work in browsers that support the File API. For IE9 and earlier, for example, you only have access to the file name. The input element has no files property in non-File API browsers.

If you want a generic solution without boxing:

public class KeyBasedEqualityComparer<T, TKey> : IEqualityComparer<T>
{
    private readonly Func<T, TKey> _keyGetter;

    public KeyBasedEqualityComparer(Func<T, TKey> keyGetter)
    {
        _keyGetter = keyGetter;
    }

    public bool Equals(T x, T y)
    {
        return EqualityComparer<TKey>.Default.Equals(_keyGetter(x), _keyGetter(y));
    }

    public int GetHashCode(T obj)
    {
        TKey key = _keyGetter(obj);

        return key == null ? 0 : key.GetHashCode();
    }
}

public static class KeyBasedEqualityComparer<T>
{
    public static KeyBasedEqualityComparer<T, TKey> Create<TKey>(Func<T, TKey> keyGetter)
    {
        return new KeyBasedEqualityComparer<T, TKey>(keyGetter);
    }
}

usage:

KeyBasedEqualityComparer<Class_reglement>.Create(x => x.Numf)

django url validation regex (source):

import re
regex = re.compile(
        r'^(?:http|ftp)s?://' # http:// or https://
        r'(?:(?:[A-Z0-9](?:[A-Z0-9-]{0,61}[A-Z0-9])?\.)+(?:[A-Z]{2,6}\.?|[A-Z0-9-]{2,}\.?)|' #domain...
        r'localhost|' #localhost...
        r'\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})' # ...or ip
        r'(?::\d+)?' # optional port
        r'(?:/?|[/?]\S+)$', re.IGNORECASE)

print(re.match(regex, "http://www.example.com") is not None) # True
print(re.match(regex, "example.com") is not None)            # False

Instead of setting absolute widths and heights, you can use percentages:

#mydiv img {
    height: 100%;
    width: 100%;
}

The above problem can be solved by adding the following dependencies in your project, as i was facing the same problem.For more detail answer to this solution please refer link SEVERE:MessageBodyWriter not found for media type=application/xml type=class java.util.HashMap

    <dependency>
        <groupId>org.codehaus.jackson</groupId>
        <artifactId>jackson-mapper-asl</artifactId>
        <version>1.9.0</version>
    </dependency>


    <!-- https://mvnrepository.com/artifact/com.fasterxml.jackson.core/jackson-databind -->
    <dependency>
        <groupId>com.fasterxml.jackson.core</groupId>
        <artifactId>jackson-databind</artifactId>
        <version>2.9.2</version>
    </dependency>   


    <dependency>
        <groupId>org.glassfish.jersey.media</groupId>
        <artifactId>jersey-media-json-jackson</artifactId>
        <version>2.25</version>
    </dependency>

The problem is the tv.setText(text). The variable tv is probably null and you call the setText method on that null, which you can't. My guess that the problem is on the findViewById method, but it's not here, so I can't tell more, without the code.

Use height():

var result = $("#myDiv").height();
alert(result);

This will give you the unit-less computed height in pixels. "px" will be stripped from the result. I.e. if the height is 400px, the result will be 400, but the result will be in pixels.

If you want to do it without jQuery, you can use plain JavaScript:

var result = document.getElementById("myDiv").offsetHeight;