For removing one element:
var elem = document.getElementById("yourid");
elem.parentElement.removeChild(elem);
For removing all the elements with for example a certain class name:
var list = document.getElementsByClassName("yourclassname");
for(var i = list.length - 1; 0 <= i; i--)
if(list[i] && list[i].parentElement)
list[i].parentElement.removeChild(list[i]);
import time
now = time.time()
future = now + 10
while time.time() < future:
# do stuff
pass
Alternatively, if you've already got your loop:
while True:
if time.time() > future:
break
# do other stuff
This method works well with pygame, since it pretty much requires you to have a big main loop.
You can center a fixed
or absolute
positioned element setting right
and left
to 0
, and then margin-left
& margin-right
to auto
as if you were centering a static
positioned element.
#example {
position: fixed;
/* center the element */
right: 0;
left: 0;
margin-right: auto;
margin-left: auto;
/* give it dimensions */
min-height: 10em;
width: 90%;
}
Hide the input with css, add a label and assign it to input button. label will be clickable and when clicked, it will fire up the file dialog.
<input type="file" id="files" class="hidden"/>
<label for="files">Select file</label>
Then style the label as a button if you want.
Based on zapl's answer, adding try()
around Closeable
's closes the streams automatically after use.
public static void unzip(File zipFile, File targetDirectory) {
try (FileInputStream fis = new FileInputStream(zipFile)) {
try (BufferedInputStream bis = new BufferedInputStream(fis)) {
try (ZipInputStream zis = new ZipInputStream(bis)) {
ZipEntry ze;
int count;
byte[] buffer = new byte[Constant.DefaultBufferSize];
while ((ze = zis.getNextEntry()) != null) {
File file = new File(targetDirectory, ze.getName());
File dir = ze.isDirectory() ? file : file.getParentFile();
if (!dir.isDirectory() && !dir.mkdirs())
throw new FileNotFoundException("Failed to ensure directory: " + dir.getAbsolutePath());
if (ze.isDirectory())
continue;
try (FileOutputStream fout = new FileOutputStream(file)) {
while ((count = zis.read(buffer)) != -1)
fout.write(buffer, 0, count);
}
}
}
}
} catch (Exception ex) {
//handle exception
}
}
Using Constant.DefaultBufferSize
(65536
) gotten from C# .NET 4
Stream.CopyTo from Jon Skeet's answer here:
https://stackoverflow.com/a/411605/1876355
I always just see posts using byte[1024]
or byte[4096]
buffer, never knew it can be much larger which improves performance and is still working perfectly normal.
Here is the Stream
Source code:
https://referencesource.microsoft.com/#mscorlib/system/io/stream.cs
//We pick a value that is the largest multiple of 4096 that is still smaller than the large object heap threshold (85K). // The CopyTo/CopyToAsync buffer is short-lived and is likely to be collected at Gen0, and it offers a significant // improvement in Copy performance. private const int _DefaultCopyBufferSize = 81920;
However, I dialed it back to 65536
which is also a multiple of 4096
just to be safe.
var query = from a in d.tbl_Usuarios
from b in d.tblComidaPreferidas
from c in d.tblLugarNacimientoes
select new
{
_nombre = a.Nombre,
_comida = b.ComidaPreferida,
_lNacimiento = c.Ciudad
};
foreach (var i in query)
{
Console.WriteLine($"{i._nombre } le gusta {i._comida} y nació en {i._lNacimiento}");
}
You don't "commit the folder" - you add the folder, as you have done, and then simply commit all changes. The command should be:
git add foldername
git commit -m "commit operation"
Here's how you could get previous, next and all siblings (both sides):
function prevSiblings(target) {
var siblings = [], n = target;
while(n = n.previousElementSibling) siblings.push(n);
return siblings;
}
function nextSiblings(target) {
var siblings = [], n = target;
while(n = n.nextElementSibling) siblings.push(n);
return siblings;
}
function siblings(target) {
var prev = prevSiblings(target) || [],
next = nexSiblings(target) || [];
return prev.concat(next);
}
I tried the answers above but the generated script file was very large and I was having problems while importing the data. I ended up Detaching the database, then copying .mdf to my new machine, then Attaching it to my new version of SQL Server Management Studio.
I found instructions for how to do this on the Microsoft Website:
https://msdn.microsoft.com/en-us/library/ms187858.aspx
NOTE: After Detaching the database I found the .mdf file within this directory:
C:\Program Files\Microsoft SQL Server\
With YAML, remember that it is all about the spaces used to define configuration through the hierarchical structures (indents). Many problems encountered whilst parsing YAML documents simply stems from extra spaces (or not enough spaces) before a key value somewhere in the given YAML file.
This is the solution which can avoid using function:
alias addone='{ num=$(cat -); echo "input: $num"; echo "result:$(($num+1))"; }<<<'
test result
addone 200
input: 200
result:201
A similar option to what was posted above by janderson would be so simply use the .GetAttribute method in selenium 2. Using this, you can grab any item that has a specific value or label that you are looking for. This can be used to determine if an element has a label, style, value, etc. A common way to do this is to loop through the items in the drop down until you find the one that you want and select it. In C#
int items = driver.FindElement(By.XPath("//path_to_drop_Down")).Count();
for(int i = 1; i <= items; i++)
{
string value = driver.FindElement(By.XPath("//path_to_drop_Down/option["+i+"]")).GetAttribute("Value1");
if(value.Conatains("Label_I_am_Looking_for"))
{
driver.FindElement(By.XPath("//path_to_drop_Down/option["+i+"]")).Click();
//Clicked on the index of the that has your label / value
}
}
I can see it's an old question, if you want to put other HTML inside could use the radiobutton with GroupName propery same in all radiobuttons and in the Text property set something like an image or the html you need.
<asp:RadioButton GroupName="group1" runat="server" ID="paypalrb" Text="<img src='https://www.paypalobjects.com/webstatic/mktg/logo/bdg_secured_by_pp_2line.png' border='0' alt='Secured by PayPal' style='width: 103px; height: 61px; padding:10px;'>" />
in my case, the war file generated didn't pick up the properties file so had to clean install again in IntelliJ editor.
If you only need to support certain modern browsers then you can now use:
navigator.languages
which returns an array of the user's language preferences in the order specified by the user.
As of now (Sep 2014) this works on: Chrome (v37), Firefox (v32) and Opera (v24)
But not on: IE (v11)
you can try this with list comprehension like the following
matrix = [['a','b','c'],['d','e','f'],['g','h','i']]
n = len(matrix)
transpose = [[row[i] for row in matrix] for i in range(n)]
print (transpose)
As said above -- use Euclidean distance.
from math import hypot
def in_radius(c_x, c_y, r, x, y):
return math.hypot(c_x-x, c_y-y) <= r
some of the answers assume you have 'eslint-plugin-jest' installed, however without needing to do that, you can simply do this in your .eslintrc
file, add:
"globals": {
"jest": true,
}
String s = "java is an object oriented programming language.";
final StringBuilder result = new StringBuilder(s.length());
String words[] = s.split("\\ "); // space found then split it
for (int i = 0; i < words.length; i++)
{
if (i > 0){
result.append(" ");
}
result.append(Character.toUpperCase(words[i].charAt(0))).append(
words[i].substring(1));
}
System.out.println(result);
Output: Java Is An Object Oriented Programming Language.
application/javascript is the correct type to use but since it's not supported by IE6-8 you're going to be stuck with text/javascript. If you don't care about validity (HTML5 excluded) then just don't specify a type.
import java.io.*;
import java.net.*;
class serversvi1
{
public static void main(String svi[]) throws IOException
{
try
{
ServerSocket servsock=new ServerSocket(5510);
DataInputStream dis=new DataInputStream(System.in);
System.out.println("enter the file name");
String fil=dis.readLine();
System.out.println(fil+" :is file transfer");
File myfile=new File(fil);
while(true)
{
Socket sock=servsock.accept();
byte[] mybytearray=new byte[(int)myfile.length()];
BufferedInputStream bis=new BufferedInputStream(new FileInputStream(myfile));
bis.read(mybytearray,0,mybytearray.length);
OutputStream os=sock.getOutputStream();
os.write(mybytearray,0,mybytearray.length);
os.flush();
sock.close();
}
}
catch(Exception saranvi)
{
System.out.print(saranvi);
}
}
}
import java.io.*;
import java.net.*;
class clientsvi1
{
public static void main(String svi[])throws IOException
{
try
{
Socket sock=new Socket("localhost",5510);
byte[] bytearray=new byte[1024];
InputStream is=sock.getInputStream();
DataInputStream dis=new DataInputStream(System.in);
System.out.println("enter the file name");
String fil=dis.readLine();
FileOutputStream fos=new FileOutputStream(fil);
BufferedOutputStream bos=new BufferedOutputStream(fos);
int bytesread=is.read(bytearray,0,bytearray.length);
bos.write(bytearray,0,bytesread);
System.out.println("out.txt file is received");
bos.close();
sock.close();
}
catch(Exception SVI)
{
System.out.print(SVI);
}
}
}
update: in the comments, Goerge says " This works on Chrome, Firefox and Edge, but not Safari."
This is the W3C solution. You can use it in 3012!
ul { list-style-type: "*"; } /* Sets the marker to a "star" character */
As an alternative to James McNellis answer, I always try to use enumeration for the bool type instead of macros: typedef enum bool {false=0; true=1;} bool;
. It is safer b/c it lets the compiler do type checking and eliminates macro expansion races
This is a simple solution
<ul class="nav navbar-nav navbar-right navbar-default menu">
<li ng-class="menuIndice == 1 ? 'active':''">
<a ng-click="menuIndice = 1" href="#/item1">item1</a>
</li>
<li ng-class="menuIndice == 2 ? 'active':''">
<a ng-click="menuIndice = 2" href="#/item2">item2</a>
</li>
<li ng-class="menuIndice == 3 ? 'active':''">
<a ng-click="menuIndice = 3" href="#/item3">item3</a>
</li>
</ul>
I'm posting this just in case someone need it..
Just create a button:
<button type="button" href="javascript:void(0);" onclick="mytable.fnDraw();">Refresh</button>
but don't forget to add this when calling the datatable:
mytable = $("#mytable").dataTable();
brew install gradle
gradle-6.0.1-all.zip
) and added gradle path
into environment variable PATH
~/.bashrc
or ~/.zshrc
etc.):export GRADLE_HOME=/path_to_your_gradle/gradle-6.0.1
export PATH=$GRADLE_HOME/bin:$PATH
PATH
take effect immediately?A: use source
:
source ~/.bashrc
it will make/execute your .bashrc
, so make PATH
become your expected latest values, which include your added gradle path.
PATH
is really take effect/working now?A: use echo
to see your added path in indeed in your PATH
? ~ echo $PATH
xxx:/Users/crifan/dev/dev_tool/java/gradle/gradle-6.0.1/bin:xxx
you can see we added /Users/crifan/dev/dev_tool/java/gradle/gradle-6.0.1/bin
into your PATH
gradle
is installed correctly on my Mac ?A: use which
to make sure can find gradle
? ~ which gradle
/Users/crifan/dev/dev_tool/java/gradle/gradle-6.0.1/bin/gradle
AND to check and see gradle version
? ~ gradle --version
------------------------------------------------------------
Gradle 6.0.1
------------------------------------------------------------
Build time: 2019-11-18 20:25:01 UTC
Revision: fad121066a68c4701acd362daf4287a7c309a0f5
Kotlin: 1.3.50
Groovy: 2.5.8
Ant: Apache Ant(TM) version 1.10.7 compiled on September 1 2019
JVM: 1.8.0_112 (Oracle Corporation 25.112-b16)
OS: Mac OS X 10.14.6 x86_64
this means the (latest) gradle is correctly installed on your mac ^_^.
for more detail please refer my (Chinese) post ?????mac???maven
'data' should be a stringified JavaScript object:
data: JSON.stringify({ "userName": userName, "password" : password })
To send your formData
, pass it to stringify
:
data: JSON.stringify(formData)
Some servers also require the application/json
content type:
contentType: 'application/json'
There's also a more detailed answer to a similar question here: Jquery Ajax Posting json to webservice
Make use of the zfill()
helper method to left-pad any string, integer or float with zeros; it's valid for both Python 2.x and Python 3.x.
Sample usage:
print str(1).zfill(3);
# Expected output: 001
Description:
When applied to a value, zfill()
returns a value left-padded with zeros when the length of the initial string value less than that of the applied width value, otherwise, the initial string value as is.
Syntax:
str(string).zfill(width)
# Where string represents a string, an integer or a float, and
# width, the desired length to left-pad.
By default, Sublime Text set 'UTF8 without BOM'
, but that wasn't specified.
The only specicified things is 'UTF8 with BOM'
.
Hope this help :)
Sub Addrisk()
Dim rActive As Range
Dim Count_Id_Column as long
Set rActive = ActiveCell
Application.ScreenUpdating = False
with thisworkbook.sheets(1) 'change to "sheetname" or sheetindex
for i = 1 to .range("A1045783").end(xlup).row
if 'something' = 'something' then
.range("A" & i).EntireRow.Copy 'add thisworkbook.sheets(index_of_sheet) if you copy from another sheet
.range("A" & i).entirerow.insert shift:= xldown 'insert and shift down, can also use xlup
.range("A" & i + 1).EntireRow.paste 'paste is all, all other defs are less.
'change I to move on to next row (will get + 1 end of iteration)
i = i + 1
end if
On Error Resume Next
.SpecialCells(xlCellTypeConstants).ClearContents
On Error GoTo 0
End With
next i
End With
Application.CutCopyMode = False
Application.ScreenUpdating = True 're-enable screen updates
End Sub
you can get distance and time using google Map API Google Map API
just pass downloaded JSON to this method you will get real time Distance and Time between two latlong's
void parseJSONForDurationAndKMS(String json) throws JSONException {
Log.d(TAG, "called parseJSONForDurationAndKMS");
JSONObject jsonObject = new JSONObject(json);
String distance;
String duration;
distance = jsonObject.getJSONArray("routes").getJSONObject(0).getJSONArray("legs").getJSONObject(0).getJSONObject("distance").getString("text");
duration = jsonObject.getJSONArray("routes").getJSONObject(0).getJSONArray("legs").getJSONObject(0).getJSONObject("duration").getString("text");
Log.d(TAG, "distance : " + distance);
Log.d(TAG, "duration : " + duration);
distanceBWLats.setText("Distance : " + distance + "\n" + "Duration : " + duration);
}
Use the $_SERVER['HTTP_REFERER']
header, but bear in mind anybody can spoof it at anytime regardless of whether they clicked on a link.
Finaly I got it!!!
import csv
def select_index(index):
csv_file = open('oscar_age_female.csv', 'r')
csv_reader = csv.DictReader(csv_file)
for line in csv_reader:
l = line['Index']
if l == index:
print(line[' "Name"'])
select_index('11')
"Bette Davis"
Try this
If @NewStatus = 'InOffice'
BEGIN
Update tblEmployee set InOffice = -1 where EmpID = @EmpID
END
Else If @NewStatus = 'OutOffice'
BEGIN
Update tblEmployee set InOffice = -1 where EmpID = @EmpID
END
Else If @NewStatus = 'Home'
BEGIN
Update tblEmployee set Home = -1 where EmpID = @EmpID
END
For you Win8 users out there, if you follow the steps in the accepted answer, console spits out a message at you saying "thou shalt not use the command-line to execute this command" (paraphrasing). Instead, access the Programs & Features via Control Panel (or Windows + R > appwiz.cpl), click 'Turn Windows features on or off', and make sure you have the following installed:
Internet Information Services
> World Wide Web Services
> Application Development Features
> ASP.NET 4.5
This will check a bunch of other options as well. As soon as I installed these features, and ran VS2012 with elevated permissions, I was able to launch my app successfully.
In Swift 4 and latter
let count = 50//For example
for i in (1...count).reversed() {
print(i)
}
You can also check like struct_var == (struct{})
. This does not allow you to compare to nil but it does check if it is initialized or not. Be careful while using this method. If your struct can have zero values for all of its fields you won't have great time.
package main
import "fmt"
type A struct {
Name string
}
func main() {
a := A{"Hello"}
var b A
if a == (A{}) {
fmt.Println("A is empty") // Does not print
}
if b == (A{}) {
fmt.Println("B is empty") // Prints
}
}
This cross-browser lib seems safer - just zoom and moz-transform won't cover as many browsers as jquery.transform2d's scale().
http://louisremi.github.io/jquery.transform.js/
For example
$('#div').css({ transform: 'scale(.5)' });
OK - I see people are voting this down without an explanation. The other answer here won't work in old Safari (people running Tiger), and it won't work consistently in some older browsers - that is, it does scale things but it does so in a way that's either very pixellated or shifts the position of the element in a way that doesn't match other browsers.
http://www.browsersupport.net/CSS/zoom
Or just look at this question, which this one is likely just a dupe of:
You need to convert your private key to PKCS8 format using following command:
openssl pkcs8 -topk8 -inform PEM -outform DER -in private_key_file -nocrypt > pkcs8_key
After this your java program can read it.
These are Unicode property shortcuts (\p{L}
for Unicode letters, \p{N}
for Unicode digits). They are supported by .NET, Perl, Java, PCRE, XML, XPath, JGSoft, Ruby (1.9 and higher) and PHP (since 5.1.0)
At any rate, that's a very strange regex. You should not be using alternation when a character class would suffice:
[\p{L}\p{N}_.-]*
Repository is more abstract domain oriented term that is part of Domain Driven Design, it is part of your domain design and a common language, DAO is a technical abstraction for data access technology, repository is concerns only with managing existing data and factories for creation of data.
check these links:
http://warren.mayocchi.com/2006/07/27/repository-or-dao/ http://fabiomaulo.blogspot.com/2009/09/repository-or-dao-repository.html
I also had this problem several times and I could 'solve' it by just deleting the messages in the "Problems"-tab and building the project again. Select the project and click on the menu bar Project -> Clean...
select your project again and okay.
Correction to top query above, to allow to run from any database
SELECT COUNT(COLUMN_NAME) FROM [*database*].INFORMATION_SCHEMA.COLUMNS WHERE
TABLE_CATALOG = 'database' AND TABLE_SCHEMA = 'dbo'
AND TABLE_NAME = 'table'
This really depends on what exactly you're trying to accomplish.
The System.ComponentModel.TypeDescriptor stuff can be used to add attributes to types, properties and object instances, and it has the limitation that you have to use it to retrieve those properties as well. If you're writing the code that consumes those attributes, and you can live within those limitations, then I'd definitely suggest it.
As far as I know, the PropertyGrid control and the visual studio design surface are the only things in the BCL that consume the TypeDescriptor stuff. In fact, that's how they do about half the things they really need to do.
Another example if you are using Titanium Alloy:
collection.fetch({
data: {
where : JSON.stringify({
page: 1
})
}
});
I know rather old question but....came across looking other thing so I give my shot:
[each*2 for each in [1,2,3,4,5] if each % 10 == 0])
{
"success": true,
"data": {
"BLR": {
"origin": "JAI",
"destination": "BLR",
"price": 127,
"transfers": 0,
"airline": "LB",
"flight_number": 655,
"departure_at": "2017-06-03T18:20:00Z",
"return_at": "2017-06-07T08:30:00Z",
"expires_at": "2017-03-05T08:40:31Z"
}
}
};
Perhaps something like this (untested code but should give you an idea)?
$new = array();
foreach ($array as $value)
{
if (isset($new[$value]))
$new[$value]++;
else
$new[$value] = 1;
}
Then you'll get a new array with the values as keys and their value is the number of times they existed in the original array.
This solution demonstrates how to transform data with Spark native functions which are better than UDFs. It also demonstrates how dropDuplicates
which is more suitable than distinct
for certain queries.
Suppose you have this DataFrame:
+-------+-------------+
|country| continent|
+-------+-------------+
| china| asia|
| brazil|south america|
| france| europe|
| china| asia|
+-------+-------------+
Here's how to take all the distinct countries and run a transformation:
df
.select("country")
.distinct
.withColumn("country", concat(col("country"), lit(" is fun!")))
.show()
+--------------+
| country|
+--------------+
|brazil is fun!|
|france is fun!|
| china is fun!|
+--------------+
You can use dropDuplicates
instead of distinct
if you don't want to lose the continent
information:
df
.dropDuplicates("country")
.withColumn("description", concat(col("country"), lit(" is a country in "), col("continent")))
.show(false)
+-------+-------------+------------------------------------+
|country|continent |description |
+-------+-------------+------------------------------------+
|brazil |south america|brazil is a country in south america|
|france |europe |france is a country in europe |
|china |asia |china is a country in asia |
+-------+-------------+------------------------------------+
See here for more information about filtering DataFrames and here for more information on dropping duplicates.
Ultimately, you'll want to wrap your transformation logic in custom transformations that can be chained with the Dataset#transform method.
ObervableCollection have constructor in which you can pass your list. Quoting MSDN:
public ObservableCollection(
List<T> list
)
list.sort(function(item1, item2){
return +(item1.attr > item2.attr) || +(item1.attr === item2.attr) - 1;
})
How they work samples:
+('aaa'>'bbb')||+('aaa'==='bbb')-1
+(false)||+(false)-1
0||0-1
-1
+('bbb'>'aaa')||+('bbb'==='aaa')-1
+(true)||+(false)-1
1||0-1
1
+('aaa'>'aaa')||+('aaa'==='aaa')-1
+(false)||+(true)-1
0||1-1
0
my problem was that when connecting to SQL Database in the add reference wizard, to find the SERVERNAME. i found it by: running a query(SELECT @@SERVERNAME) inside SQL management studio and the reusl was my servername. I put that in my server name box and it worked all fine.
Simplest way to create custom dialog box:
Initialize and show dialog:
ViewDialog alertDialoge = new ViewDialog();
alertDialoge.showDialog(getActivity(), "PUT DIALOG TITLE");
Create method:
public class ViewDialog {
public void showDialog(Activity activity, String msg) {
final Dialog dialog = new Dialog(activity);
dialog.requestWindowFeature(Window.FEATURE_NO_TITLE);
dialog.setCancelable(false);
dialog.setContentView(R.layout.custom_dialoge_feedback);
TextView text = (TextView) dialog.findViewById(R.id.text_dialog_feedback);
text.setText(msg);
Button okButton = (Button) dialog.findViewById(R.id.btn_dialog_feedback);
Button cancleButton = (Button) dialog.findViewById(R.id.btn_dialog_cancle_feedback);
final EditText edittext_tv = (EditText) dialog.findViewById(R.id.dialoge_alert_text_feedback);
okButton.setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View v) {
//Perfome Action
}
});
cancleButton.setOnClickListener(new View.OnClickListener() {
@Override
public void onClick(View view) {
dialog.dismiss();
}
});
dialog.show();
}
}
Create layout XML which you want or need.
>>> class C:
... def f(self):
... print "hi"
...
>>> C.f()
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: unbound method f() must be called with C instance as
first argument (got nothing instead)
It fails because of TypeError because you didn't instantiate the class first, you have two choices: 1: either make the method static so you can run it in a static way, or 2: instantiate your class so you have an instance to grab onto, to run the method.
It looks like you want to run the method in a static way, do this:
>>> class C:
... @staticmethod
... def f():
... print "hi"
...
>>> C.f()
hi
Or, what you probably meant is to use the instantiated instance like this:
>>> class C:
... def f(self):
... print "hi"
...
>>> c1 = C()
>>> c1.f()
hi
>>> C().f()
hi
If this confuses you, ask these questions:
I shall try the solution with jQuery, for sure it should give a nice result. Of course you have to load jQuery ... What about a pop-up with something like this? Of course this is dependant on the user authorizing pop-ups.
<html>
<head>
<script language="javascript">
var ret;
function returnfunction()
{
alert(ret);
}
</script>
</head>
<body>
<form>
<label id="QuestionToAsk" name="QuestionToAsk">Here is talked.</label><br />
<input type="button" value="Yes" name="yes" onClick="ret=true;returnfunction()" />
<input type="button" value="No" onClick="ret=false;returnfunction()" />
</form>
</body>
</html>
var strcmp = new Intl.Collator(undefined, {numeric:true, sensitivity:'base'}).compare;
Usage: strcmp(string1, string2)
Result: 1
means string1 is bigger, 0
means equal, -1
means string2 is bigger.
This has higher performance than String.prototype.localeCompare
Also, numeric:true
makes it do logical number comparison
In my case, USB debugging wasn't enabled on my device yet connecting the device to my macbook didn't cause the familiar "Allow USB Debugging" dialog to pop up on the screen.
Now only I came across this situation and found some more interesting features around GROUP_CONCAT
. I hope these details will make you feel interesting.
simple GROUP_CONCAT
SELECT GROUP_CONCAT(TaskName)
FROM Tasks;
Result:
+------------------------------------------------------------------+
| GROUP_CONCAT(TaskName) |
+------------------------------------------------------------------+
| Do garden,Feed cats,Paint roof,Take dog for walk,Relax,Feed cats |
+------------------------------------------------------------------+
GROUP_CONCAT with DISTINCT
SELECT GROUP_CONCAT(TaskName)
FROM Tasks;
Result:
+------------------------------------------------------------------+
| GROUP_CONCAT(TaskName) |
+------------------------------------------------------------------+
| Do garden,Feed cats,Paint roof,Take dog for walk,Relax,Feed cats |
+------------------------------------------------------------------+
GROUP_CONCAT with DISTINCT and ORDER BY
SELECT GROUP_CONCAT(DISTINCT TaskName ORDER BY TaskName DESC)
FROM Tasks;
Result:
+--------------------------------------------------------+
| GROUP_CONCAT(DISTINCT TaskName ORDER BY TaskName DESC) |
+--------------------------------------------------------+
| Take dog for walk,Relax,Paint roof,Feed cats,Do garden |
+--------------------------------------------------------+
GROUP_CONCAT with DISTINCT and SEPARATOR
SELECT GROUP_CONCAT(DISTINCT TaskName SEPARATOR ' + ')
FROM Tasks;
Result:
+----------------------------------------------------------------+
| GROUP_CONCAT(DISTINCT TaskName SEPARATOR ' + ') |
+----------------------------------------------------------------+
| Do garden + Feed cats + Paint roof + Relax + Take dog for walk |
+----------------------------------------------------------------+
GROUP_CONCAT and Combining Columns
SELECT GROUP_CONCAT(TaskId, ') ', TaskName SEPARATOR ' ')
FROM Tasks;
Result:
+------------------------------------------------------------------------------------+
| GROUP_CONCAT(TaskId, ') ', TaskName SEPARATOR ' ') |
+------------------------------------------------------------------------------------+
| 1) Do garden 2) Feed cats 3) Paint roof 4) Take dog for walk 5) Relax 6) Feed cats |
+------------------------------------------------------------------------------------+
GROUP_CONCAT and Grouped Results
Assume that the following are the results before using GROUP_CONCAT
+------------------------+--------------------------+
| ArtistName | AlbumName |
+------------------------+--------------------------+
| Iron Maiden | Powerslave |
| AC/DC | Powerage |
| Jim Reeves | Singing Down the Lane |
| Devin Townsend | Ziltoid the Omniscient |
| Devin Townsend | Casualties of Cool |
| Devin Townsend | Epicloud |
| Iron Maiden | Somewhere in Time |
| Iron Maiden | Piece of Mind |
| Iron Maiden | Killers |
| Iron Maiden | No Prayer for the Dying |
| The Script | No Sound Without Silence |
| Buddy Rich | Big Swing Face |
| Michael Learns to Rock | Blue Night |
| Michael Learns to Rock | Eternity |
| Michael Learns to Rock | Scandinavia |
| Tom Jones | Long Lost Suitcase |
| Tom Jones | Praise and Blame |
| Tom Jones | Along Came Jones |
| Allan Holdsworth | All Night Wrong |
| Allan Holdsworth | The Sixteen Men of Tain |
+------------------------+--------------------------+
USE Music;
SELECT ar.ArtistName,
GROUP_CONCAT(al.AlbumName)
FROM Artists ar
INNER JOIN Albums al
ON ar.ArtistId = al.ArtistId
GROUP BY ArtistName;
Result:
+------------------------+----------------------------------------------------------------------------+
| ArtistName | GROUP_CONCAT(al.AlbumName) |
+------------------------+----------------------------------------------------------------------------+
| AC/DC | Powerage |
| Allan Holdsworth | All Night Wrong,The Sixteen Men of Tain |
| Buddy Rich | Big Swing Face |
| Devin Townsend | Epicloud,Ziltoid the Omniscient,Casualties of Cool |
| Iron Maiden | Somewhere in Time,Piece of Mind,Powerslave,Killers,No Prayer for the Dying |
| Jim Reeves | Singing Down the Lane |
| Michael Learns to Rock | Eternity,Scandinavia,Blue Night |
| The Script | No Sound Without Silence |
| Tom Jones | Long Lost Suitcase,Praise and Blame,Along Came Jones |
+------------------------+----------------------------------------------------------------------------+
Set equal name
attributes to create a group;
<form>_x000D_
<fieldset id="group1">_x000D_
<input type="radio" value="value1" name="group1">_x000D_
<input type="radio" value="value2" name="group1">_x000D_
</fieldset>_x000D_
_x000D_
<fieldset id="group2">_x000D_
<input type="radio" value="value1" name="group2">_x000D_
<input type="radio" value="value2" name="group2">_x000D_
<input type="radio" value="value3" name="group2">_x000D_
</fieldset>_x000D_
</form>
_x000D_
This example selects a new Range
of Cells
defined by the current cell to a cell 5 to the right.
Note that .Offset
takes arguments of Offset(row, columns)
and can be quite useful.
Sub testForStackOverflow()
Range(ActiveCell, ActiveCell.Offset(0, 5)).Copy
End Sub
Be nice if there was a Javascript API version. That way can integrate w/ other AJAX apps or browser extensions/gadgets/widgets.
Right now, current APIs restrict to web app technologies that support Java, .NET, or Python, more for server side, unless may use Google Web Toolkit to translate Java code to Javascript.
You can try open MVG library, It can be used for multiple interfaces too.
i actually deveopped something functional for one of my projects before and here is the code :
/**
* @param url is the URI address of the WebService
* @param parameterObject the object where all parameters are passed.
* @param returnType the return type you are expecting. Exemple : someClass.class
*/
public static <T> T getObject(String url, Object parameterObject, Class<T> returnType) {
try {
ResponseEntity<T> res;
ObjectMapper mapper = new ObjectMapper();
RestTemplate restTemplate = new RestTemplate();
restTemplate.getMessageConverters().add(new MappingJackson2HttpMessageConverter());
restTemplate.getMessageConverters().add(0, new StringHttpMessageConverter(Charset.forName("UTF-8")));
((SimpleClientHttpRequestFactory) restTemplate.getRequestFactory()).setConnectTimeout(2000);
HttpHeaders headers = new HttpHeaders();
headers.setContentType(MediaType.APPLICATION_JSON);
HttpEntity<T> entity = new HttpEntity<T>((T) parameterObject, headers);
String json = mapper.writeValueAsString(restTemplate.exchange(url, org.springframework.http.HttpMethod.POST, entity, returnType).getBody());
return new Gson().fromJson(json, returnType);
} catch (Exception e) {
e.printStackTrace();
return null;
}
}
/**
* @param url is the URI address of the WebService
* @param parameterObject the object where all parameters are passed.
* @param returnType the type of the returned object. Must be an array. Exemple : someClass[].class
*/
public static <T> List<T> getListOfObjects(String url, Object parameterObject, Class<T[]> returnType) {
try {
ObjectMapper mapper = new ObjectMapper();
RestTemplate restTemplate = new RestTemplate();
restTemplate.getMessageConverters().add(new MappingJackson2HttpMessageConverter());
restTemplate.getMessageConverters().add(0, new StringHttpMessageConverter(Charset.forName("UTF-8")));
((SimpleClientHttpRequestFactory) restTemplate.getRequestFactory()).setConnectTimeout(2000);
HttpHeaders headers = new HttpHeaders();
headers.setContentType(MediaType.APPLICATION_JSON);
HttpEntity<T> entity = new HttpEntity<T>((T) parameterObject, headers);
ResponseEntity<Object[]> results = restTemplate.exchange(url, org.springframework.http.HttpMethod.POST, entity, Object[].class);
String json = mapper.writeValueAsString(results.getBody());
T[] arr = new Gson().fromJson(json, returnType);
return Arrays.asList(arr);
} catch (Exception e) {
e.printStackTrace();
return null;
}
}
I hope that this will help somebody !
If you want to do the background explicitly, you must be certain that you draw behind the current elements on the canvas.
var canvas = document.getElementById("canvas");
var ctx = canvas.getContext("2d");
// Add behind elements.
ctx.globalCompositeOperation = 'destination-over'
// Now draw!
ctx.fillStyle = "blue";
ctx.fillRect(0, 0, canvas.width, canvas.height);
please try this to clean and format your column names:
df.columns = (df.columns.str.strip().str.upper()
.str.replace(' ', '_')
.str.replace('(', '')
.str.replace(')', ''))
I'm assuming you want to display the welcome when you mouse over "some text".
As a message box, this will be:
<div id="sub1" onmouseover="javascript:alert('Welcome!');">some text</div>
As a tooltip, it should be:
<div id="sub1" title="Welcome!">some text</div>
As a new div, you can use:
<div id="sub1" onmouseover="javascript:var mydiv = document.createElement('div'); mydiv.height = 100; mydiv.width = 100; mydiv.zindex = 1000; mydiv.innerHTML = 'Welcome!'; mydiv.position = 'absolute'; mydiv.top = 0; mydiv.left = 0;">some text</div>
You should NEVER contain spaces in the id
of an element.
While createting the bat file, you can easly avoid the space. If you want to mentioned "program files "folder in batch file.
Do following steps:
1. Type c:
then press enter
2. cd program files
3. cd "choose your own folder name"
then continue as you wish.
This way you can create batch file and you can mention program files folder.
//just copy this code to your main activity.
if ( ContextCompat.checkSelfPermission(MainActivity.this, android.Manifest.permission.READ_EXTERNAL_STORAGE) != PackageManager.PERMISSION_GRANTED ){
if (ActivityCompat.shouldShowRequestPermissionRationale(MainActivity.this, android.Manifest.permission.READ_EXTERNAL_STORAGE)){
}else {
ActivityCompat.requestPermissions(MainActivity.this,new String[]{android.Manifest.permission.READ_EXTERNAL_STORAGE},1);
}
}else {
}
I fixed this issue use the method on http://matthill.eu/android/google-play-error-rpcs5aec0/
In configuration class
@Configuration
@PropertySource("classpath:/com/myco/app.properties")
public class AppConfig {
@Autowired
Environment env;
@Bean
public TestBean testBean() {
TestBean testBean = new TestBean();
testBean.setName(env.getProperty("testbean.name"));
return testBean;
}
}
I created a PHP class for this with a corresponding jQuery plugin. I've open-sourced it at https://github.com/peterjtracey/timezoneWidget - the PHP code is inspired by another stackoverflow answer, but I think much more elegant. The jQuery plugin gives a great interface for selecting a timezone.
@Pantelis answer somehow steered me to a solution for a similar misunderstanding. A message board project I'm working on needs to show an optional image. I was having fits trying to get the src=imagefile to concatenate a fixed path and variable filename string until I saw the quirky use of "''" quotes :-)
<template id="symp-tmpl">
<div>
<div v-for="item in items" style="clear: both;">
<div v-if="(item.imagefile !== '[none]')">
<img v-bind:src="'/storage/userimages/' + item.imagefile">
</div>
sub: <span>@{{ item.subject }}</span>
<span v-if="(login == item.author)">[edit]</span>
<br>@{{ item.author }}
<br>msg: <span>@{{ item.message }}</span>
</div>
</div>
</template>
You can use something like this whit array and for loop.
<p id='fisrt'>??????</p>
<p id='second'>??????</p>
<p id='third'>??????</p>
<p id='forth'>??????</p>
<p id='fifth'>??????</p>
<button id="change" onclick="changeColor()">color red</button>
<script>
var ids = ['fisrt','second','third','forth','fifth'];
function changeColor() {
for (var i = 0; i < ids.length; i++) {
document.getElementById(ids[i]).style.color='red';
}
}
</script>
Extension IDs can be found in:
chrome://extensions
(Chrome_Hotdog >> More_tools >> Extensions) Developer mode.
For Linux: $HOME/.config/google-chrome/Default/Preferences
(json file) under ["extensions"]
.
The proper way that actually works:
URL resource = YourClass.class.getResource("abc");
Paths.get(resource.toURI()).toFile();
It doesn't matter now where the file in the classpath physically is, it will be found as long as the resource is actually a file and not a JAR entry.
(The seemingly obvious new File(resource.getPath())
doesn't work for all paths! The path is still URL-encoded!)
On Excel 2010 try this:
For Chrome on Mac, if you have multiple profiles, you can find it under your profile folder, either Default
or Profile #
. i.e either
~/Library/Application Support/Google/Chrome/Default/Extensions/
or
~/Library/Application Support/Google/Chrome/<Profile 1>/Extensions/
The pattern \d
might not be supported by your sed
. Try [0-9]
or [[:digit:]]
instead.
To only print the actual match (not the entire matching line), use a substitution.
sed -n 's/.*\([0-9][0-9]*G[0-9][0-9]*\).*/\1/p'
The following example for complex numbers should be self explanatory including the error message at the end
>>> x=complex(1,2)
>>> print x
(1+2j)
>>> y=complex(3,4)
>>> print y
(3+4j)
>>> z=x+y
>>> print x
(1+2j)
>>> print z
(4+6j)
>>> z=x*y
>>> print z
(-5+10j)
>>> z=x/y
>>> print z
(0.44+0.08j)
>>> print x.conjugate()
(1-2j)
>>> print x.imag
2.0
>>> print x.real
1.0
>>> print x>y
Traceback (most recent call last):
File "<pyshell#149>", line 1, in <module>
print x>y
TypeError: no ordering relation is defined for complex numbers
>>> print x==y
False
>>>
You'll need to open the workbook to refer to it.
Sub Setwbk()
Dim wbk As Workbook
Set wbk = Workbooks.Open("F:\Quarterly Reports\2012 Reports\New Reports\ _
Master Benchmark Data Sheet.xlsx")
End Sub
* Follow Doug's answer if the workbook is already open. For the sake of making this answer as complete as possible, I'm including my comment on his answer:
Why do I have to "set" it?
Set
is how VBA assigns object variables. Since a Range
and a Workbook
/Worksheet
are objects, you must use Set
with these.
The only three literal characters which are treated specially in the replace clause are /
(to close the clause), \
(to escape characters, backreference, &c.), and &
(to include the match in the replacement). Therefore, all you need to do is escape those three characters:
sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
Example:
$ export REPLACE="'\"|\\/><&!"
$ echo fooKEYWORDbar | sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
foo'"|\/><&!bar
You can use figure
to create a new plot, for example, or use close
after the first plot.
<?php
$string = 'foo';
if (preg_match('/[\'^£$%&*()}{@#~?><>,|=_+¬-]/', $string))
{
// one or more of the 'special characters' found in $string
}
Thanks everyone for solution.
I could solve my same problem using below solution.
In my project, I added jar which were created in Java8. And my project was referring to JRE 7. When i changed project JRE to 8. My problem solved.
Steps: In eclipse, right click on project name in project explorer > build path > Libraries > click on jre version > click edit > installed JRE > add > standerd VM > select JRE home click-path (path should be localePath\java\jdk1.8.0_25\jre) > provide name > save > select same JRE for project > finish > ok Refresh/build project once > try to run your java file. it should work.
import cv2
img=cv2.imread('my_test.jpg')
img_info = img.shape
print("Image height :",img_info[0])
print("Image Width :", img_info[1])
print("Image channels :", img_info[2])
My_test.jpg link ---> https://i.pinimg.com/originals/8b/ca/f5/8bcaf5e60433070b3210431e9d2a9cd9.jpg
I successfully used
diff "${file1}" "${file2}" | grep "<" | sed 's/^<//g' > "${diff_file}"
Outputting the difference to a file.
Or place the image in a location relative to a class and you don't need all that package/path info in the string itself.
com.xyz.SomeClassInThisPackage.class.getResource( "resources/camera.png" );
That way if you move the class to a different package, you dont have to find all the strings, you just move the class and its resources directory.
This code is well-formed. You only have to pay attention that the definition of the template is visible at the point of instantiation. To quote the standard, § 14.7.2.4:
The definition of a non-exported function template, a non-exported member function template, or a non-exported member function or static data member of a class template shall be present in every translation unit in which it is explicitly instantiated.
If you only need to execute only one command all by itself and no wait needed, you should try "cmd /c", this works for me!
cmd /c start iexplore "http://your/url.html"
cmd /c means executing a command and then exit.
You can learn the functions of your switches by typing in your command prompt
anycmd /?
i've successfully removed dependencies of a package using this bash line:
for dep in $(pip show somepackage | grep Requires | sed 's/Requires: //g; s/,//g') ; do pip uninstall -y $dep ; done
this worked on pip 1.5.4
There are lots of discussions around this topic.
You can find one of them here:
One of the most popular suggestions have been the Distinct method taking a lambda expression as a parameter as @Servy has pointed out.
The chief architect of C#, Anders Hejlsberg has suggested the solution here. Also explaining why the framework design team decided not to add an overload of Distinct method which takes a lambda.
I had a similar problem, where I couldn't even install local::lib
I created an installer that installed the module somewhere relative to the .pl files
The install goes like:
perl Makefile.PL PREFIX=./modulos
make
make install
Then, in the .pl file that requires the module, which is in ./
use lib qw(./modulos/share/perl/5.8.8/); # You may need to change this path
use module::name;
The rest of the files (makefile.pl, module.pm, etc) require no changes.
You can call the .pl file with just
perl file.pl
My issue was resolved by updating the metadata part of the connection string. Apparently it was pointing at the wrong .csdl / .ssdl / .msl reference.
In your CSS Style tag put this:
body {
background: url('yourgif.gif') no-repeat center center fixed;
background-size: cover;
}
From the PHP Manual:
Warning This extension was deprecated in PHP 5.5.0, and it was removed in PHP 7.0.0. Instead, the MySQLi or PDO_MySQL extension should be used. See also MySQL: choosing an API guide. Alternatives to this function include:
mysqli_connect()
PDO::__construct()
use MySQLi
or PDO
<?php
$con = mysqli_connect('localhost', 'username', 'password', 'database');
While iterating over a JSON array (org.json.JSONArray, built into Android), watch out for null objects; for example, you may get "null"
instead of a null string.
A check may look like:
s[i] = array.isNull(i) ? null : array.getString(i);
The following works for me:
function decodeHtml(html) {
let areaElement = document.createElement("textarea");
areaElement.innerHTML = html;
return areaElement.value;
}
Sorry if this is thread Necromancy, but this is still relevant today, especially with how much APIs are used!
An issue I had was: I didn't know that under the 'Key' column you need to put: 'Content-Type'; I thought this was a User Key for when it came back in the request, which it isn't.
So something as simple as that may help you, I think Postman could word that column better, because I didn't even have to read the Documentation when it came to using Fiddler; whereas I did with Postman.
placeBets(betList, stakeAmt)
is an instance method not a static method. You need to create an instance of CBetfairAPI
first:
MyBetfair api = new MyBetfair();
ArrayList bets = api.placeBets(betList, stakeAmt);
This is a CSS trick, not a formal solution. I leave the code with the period black because it helps me position the element. Afterward, color your content (color:white) and (margin-top:-5px or so) to make it as though the period is not there.
div.yourdivname:after {
content: ".";
border-bottom:1px solid grey;
width:60%;
display:block;
margin:0 auto;
}
So i finally figured out how to do this. The basic idea is that you have the token you get the first time you ask for authentication. This first token has a refresh token. The first original token expires after an hour. After an hour you have to use the refresh token from the first token to get a new usable token. You use $client->refreshToken($refreshToken)
to retrieve a new token. I will call this "temp token." You need to store this temp token as well because after an hour it expires as well and note it does not have a refresh token associated with it. In order to get a new temp token you need to use the method you used before and use the first token's refreshtoken. I have attached code below, which is ugly, but im new at this...
//pull token from database
$tokenquery="SELECT * FROM token WHERE type='original'";
$tokenresult = mysqli_query($cxn,$tokenquery);
if($tokenresult!=0)
{
$tokenrow=mysqli_fetch_array($tokenresult);
extract($tokenrow);
}
$time_created = json_decode($token)->created;
$t=time();
$timediff=$t-$time_created;
echo $timediff."<br>";
$refreshToken= json_decode($token)->refresh_token;
//start google client note:
$client = new Google_Client();
$client->setApplicationName('');
$client->setScopes(array());
$client->setClientId('');
$client->setClientSecret('');
$client->setRedirectUri('');
$client->setAccessType('offline');
$client->setDeveloperKey('');
//resets token if expired
if(($timediff>3600)&&($token!=''))
{
echo $refreshToken."</br>";
$refreshquery="SELECT * FROM token WHERE type='refresh'";
$refreshresult = mysqli_query($cxn,$refreshquery);
//if a refresh token is in there...
if($refreshresult!=0)
{
$refreshrow=mysqli_fetch_array($refreshresult);
extract($refreshrow);
$refresh_created = json_decode($token)->created;
$refreshtimediff=$t-$refresh_created;
echo "Refresh Time Diff: ".$refreshtimediff."</br>";
//if refresh token is expired
if($refreshtimediff>3600)
{
$client->refreshToken($refreshToken);
$newtoken=$client->getAccessToken();
echo $newtoken."</br>";
$tokenupdate="UPDATE token SET token='$newtoken' WHERE type='refresh'";
mysqli_query($cxn,$tokenupdate);
$token=$newtoken;
echo "refreshed again";
}
//if the refresh token hasn't expired, set token as the refresh token
else
{
$client->setAccessToken($token);
echo "use refreshed token but not time yet";
}
}
//if a refresh token isn't in there...
else
{
$client->refreshToken($refreshToken);
$newtoken=$client->getAccessToken();
echo $newtoken."</br>";
$tokenupdate="INSERT INTO token (type,token) VALUES ('refresh','$newtoken')";
mysqli_query($cxn,$tokenupdate);
$token=$newtoken;
echo "refreshed for first time";
}
}
//if token is still good.
if(($timediff<3600)&&($token!=''))
{
$client->setAccessToken($token);
}
$service = new Google_DfareportingService($client);
I don't think this is the BEST solution, but it does appear to work. Instead of using the background color, I'm going to just embed an image of the background, position it relatively and then wrap the text in a child element and position it absolute - in the centre.
navigate to the file where you want to organize imports or just click on the whole package or even click on the project than press CTRL + ALT + O
#include <bits/stdc++.h>
using namespace std;
#define Max 1000
vector <int> adj[Max];
bool visited[Max];
void bfs_recursion_utils(queue<int>& Q) {
while(!Q.empty()) {
int u = Q.front();
visited[u] = true;
cout << u << endl;
Q.pop();
for(int i = 0; i < (int)adj[u].size(); ++i) {
int v = adj[u][i];
if(!visited[v])
Q.push(v), visited[v] = true;
}
bfs_recursion_utils(Q);
}
}
void bfs_recursion(int source, queue <int>& Q) {
memset(visited, false, sizeof visited);
Q.push(source);
bfs_recursion_utils(Q);
}
int main(void) {
queue <int> Q;
adj[1].push_back(2);
adj[1].push_back(3);
adj[1].push_back(4);
adj[2].push_back(5);
adj[2].push_back(6);
adj[3].push_back(7);
bfs_recursion(1, Q);
return 0;
}
You have to use GetThumbnailImage
method in the Image
class:
https://msdn.microsoft.com/en-us/library/8t23aykb%28v=vs.110%29.aspx
Here's a rough example that takes an image file and makes a thumbnail image from it, then saves it back to disk.
Image image = Image.FromFile(fileName);
Image thumb = image.GetThumbnailImage(120, 120, ()=>false, IntPtr.Zero);
thumb.Save(Path.ChangeExtension(fileName, "thumb"));
It is in the System.Drawing namespace (in System.Drawing.dll).
Behavior:
If the Image contains an embedded thumbnail image, this method retrieves the embedded thumbnail and scales it to the requested size. If the Image does not contain an embedded thumbnail image, this method creates a thumbnail image by scaling the main image.
Important: the remarks section of the Microsoft link above warns of certain potential problems:
The
GetThumbnailImage
method works well when the requested thumbnail image has a size of about 120 x 120 pixels. If you request a large thumbnail image (for example, 300 x 300) from an Image that has an embedded thumbnail, there could be a noticeable loss of quality in the thumbnail image.It might be better to scale the main image (instead of scaling the embedded thumbnail) by calling the
DrawImage
method.
It will assign value of v1
to v2
if it is not null, else it will take a default value as zero.
v2=v1??0
Or below is the other way to write it.
v2 = v1.HasValue?v1:0
// replace
return <p>hello</p>;
// with
return <p>{JSON.stringify(movies)}</p>;
Now you should see, that your code actually does work. What does not work is the console.log(movies)
. This is because movies
points to the old state. If you move your console.log(movies)
outside of useEffect
, right above the return, you will see the updated movies object.
Save it as a .ps1 file and then execute
powershell -file "path\to your\start stop nation service command file.ps1"
Consider making your route:
_files_manage:
pattern: /files/management/{project}/{user}
defaults: { _controller: AcmeTestBundle:File:manage }
since they are required fields. It will make your url's prettier, and be a bit easier to manage.
Your Controller would then look like
public function projectAction($project, $user)
First thing to do is run this:
SHOW GRANTS;
You will quickly see you were assigned the anonymous user to authenticate into mysql.
Instead of logging into mysql with
mysql
login like this:
mysql -uroot
By default, root@localhost has all rights and no password.
If you cannot login as root without a password, do the following:
Step 01) Add the two options in the mysqld section of my.ini:
[mysqld]
skip-grant-tables
skip-networking
Step 02) Restart mysql
net stop mysql
<wait 10 seconds>
net start mysql
Step 03) Connect to mysql
mysql
Step 04) Create a password from root@localhost
UPDATE mysql.user SET password=password('whateverpasswordyoulike')
WHERE user='root' AND host='localhost';
exit
Step 05) Restart mysql
net stop mysql
<wait 10 seconds>
net start mysql
Step 06) Login as root with password
mysql -u root -p
You should be good from there.
Have in mind that clone()
doesn't work out of the box. You will have to implement Cloneable
and override the clone()
method making in public
.
There are a few alternatives, which are preferable (since the clone()
method has lots of design issues, as stated in other answers), and the copy-constructor would require manual work:
BeanUtils.cloneBean(original)
creates a shallow clone, like the one created by Object.clone()
. (this class is from commons-beanutils)
SerializationUtils.clone(original)
creates a deep clone. (i.e. the whole properties graph is cloned, not only the first level) (from commons-lang), but all classes must implement Serializable
Java Deep Cloning Library offers deep cloning without the need to implement Serializable
What I had to do was disable "Discover network targets" at chrome://inspect/#devices.
That's the only thing that solved it for good in my setup(chrome Version 78.0.3904.97 deepinOS/debian based).
This seems to work for me.
protected void Page_Load(object sender, EventArgs e)
{
if (!Page.IsPostBack)
{
DropDownList1.DataBind(); // get the data into the list you can set it
DropDownList1.Items.FindByValue("SOMECREDITPROBLEMS").Selected = true;
}
}
I'm exceptionally new to VBScript, so this may not be considered best practice or there may be a reason it shouldn't be done this that way I'm not yet aware of, but this is the solution I came up with to trim down the amount of error logging code in my main code block.
Dim oConn, connStr
Set oConn = Server.CreateObject("ADODB.Connection")
connStr = "Provider=SQLOLEDB;Server=XX;UID=XX;PWD=XX;Databse=XX"
ON ERROR RESUME NEXT
oConn.Open connStr
If err.Number <> 0 Then : showError() : End If
Sub ShowError()
'You could write the error details to the console...
errDetail = "<script>" & _
"console.log('Description: " & err.Description & "');" & _
"console.log('Error number: " & err.Number & "');" & _
"console.log('Error source: " & err.Source & "');" & _
"</script>"
Response.Write(errDetail)
'...you could display the error info directly in the page...
Response.Write("Error Description: " & err.Description)
Response.Write("Error Source: " & err.Source)
Response.Write("Error Number: " & err.Number)
'...or you could execute additional code when an error is thrown...
'Insert error handling code here
err.clear
End Sub
You can also cast an array to a string like...
newStr = String(aa);
I also agree with Tor Valamo's answer, console.log should have no problem with arrays, no need to convert to a string unless you're debugging something or just curious.
use php implode()
or serialize()
According to this: http://www.vistax64.com/vista-installation-setup/33219-regsvr32-error-0x80004005.html
Run it in a elevated command prompt.
SELECT a.salesorderid, a.orderdate, s.orderdate, s.salesorderid
FROM A a
OUTER APPLY (SELECT top(1) *
FROM B b WHERE a.salesorderid = b.salesorderid) as s
WHERE A.Date BETWEEN '2000-1-4' AND '2010-1-4'
For comparison, here is another way to read the file. It has one advantage that you don't need to know how many integers there are in the file.
File file = new File("Tall.txt");
byte[] bytes = new byte[(int) file.length()];
FileInputStream fis = new FileInputStream(file);
fis.read(bytes);
fis.close();
String[] valueStr = new String(bytes).trim().split("\\s+");
int[] tall = new int[valueStr.length];
for (int i = 0; i < valueStr.length; i++)
tall[i] = Integer.parseInt(valueStr[i]);
System.out.println(Arrays.asList(tall));
You can use text-align: center; line-height: 65px;
CSS
.loginBtn {
background:url(images/loginBtn-center.jpg) repeat-x;
width:175px;
height:65px;
margin:20px auto;
border-radius:10px;
-webkit-border-radius:10px;
box-shadow:0 1px 2px #5e5d5b;
text-align: center; <--------- Here
line-height: 65px; <--------- Here
}
There are a few things to keep in mind while declaring primitive type values.
They are:
So in your code:
public class Main {
int instanceVariable;
static int staticVariable;
public static void main(String[] args) {
Main mainInstance = new Main()
int localVariable;
int localVariableTwo = 2;
System.out.println(mainInstance.instanceVariable);
System.out.println(staticVariable);
// System.out.println(localVariable); // Will throw a compilation error
System.out.println(localVariableTwo);
}
}
I got a similar error and it took me a while to realize that in my case I named the array variable payInvoices and the function also payInvoices. It confused AngularJs. Once I changed the name to processPayments() it finally worked. Just wanted to share this error and solution as it took me long time to figure this out.
Probabily you are using XMAPP as service, to restart XMAPP properly, you have to open XMAPP control panel un-check both "Svc" mdodules against Apache and MySQL. Then click on exit, now restart XMAPP and you are done.
For elementwise multiplication of matrix
objects, you can use numpy.multiply
:
import numpy as np
a = np.array([[1,2],[3,4]])
b = np.array([[5,6],[7,8]])
np.multiply(a,b)
Result
array([[ 5, 12],
[21, 32]])
However, you should really use array
instead of matrix
. matrix
objects have all sorts of horrible incompatibilities with regular ndarrays. With ndarrays, you can just use *
for elementwise multiplication:
a * b
If you're on Python 3.5+, you don't even lose the ability to perform matrix multiplication with an operator, because @
does matrix multiplication now:
a @ b # matrix multiplication
I've continued my research and have not found any reasonable way to do this. The Columns property on the DataGrid isn't something I can bind against, in fact it's read only.
Bryan suggested something might be done with AutoGenerateColumns so I had a look. It uses simple .Net reflection to look at the properties of the objects in ItemsSource and generates a column for each one. Perhaps I could generate a type on the fly with a property for each column but this is getting way off track.
Since this problem is so easily sovled in code I will stick with a simple extension method I call whenever the data context is updated with new columns:
public static void GenerateColumns(this DataGrid dataGrid, IEnumerable<ColumnSchema> columns)
{
dataGrid.Columns.Clear();
int index = 0;
foreach (var column in columns)
{
dataGrid.Columns.Add(new DataGridTextColumn
{
Header = column.Name,
Binding = new Binding(string.Format("[{0}]", index++))
});
}
}
// E.g. myGrid.GenerateColumns(schema);
Not after creating it, no. But you could use a defaultdict
in the first place, which sets default values when you initialize it.
Here is an example:
>>> u = u'€€€'
>>> s = u.encode('utf8')
>>> s
'\xe2\x82\xac\xe2\x82\xac\xe2\x82\xac'
There is no advantage of using one vs the other, but, there is a specific case where throw
won't work. However, those cases can be fixed.
Any time you are inside of a promise callback, you can use throw
. However, if you're in any other asynchronous callback, you must use reject
.
For example, this won't trigger the catch:
new Promise(function() {
setTimeout(function() {
throw 'or nah';
// return Promise.reject('or nah'); also won't work
}, 1000);
}).catch(function(e) {
console.log(e); // doesn't happen
});
_x000D_
Instead you're left with an unresolved promise and an uncaught exception. That is a case where you would want to instead use reject
. However, you could fix this in two ways.
new Promise(function(resolve, reject) {
setTimeout(function() {
reject('or nah');
}, 1000);
}).catch(function(e) {
console.log(e); // works!
});
_x000D_
function timeout(duration) { // Thanks joews
return new Promise(function(resolve) {
setTimeout(resolve, duration);
});
}
timeout(1000).then(function() {
throw 'worky!';
// return Promise.reject('worky'); also works
}).catch(function(e) {
console.log(e); // 'worky!'
});
_x000D_
You can use the DefaultView.ToTable method of a DataTable to do the filtering like this (adapt to C#):
Public Sub RemoveDuplicateRows(ByRef rDataTable As DataTable)
Dim pNewDataTable As DataTable
Dim pCurrentRowCopy As DataRow
Dim pColumnList As New List(Of String)
Dim pColumn As DataColumn
'Build column list
For Each pColumn In rDataTable.Columns
pColumnList.Add(pColumn.ColumnName)
Next
'Filter by all columns
pNewDataTable = rDataTable.DefaultView.ToTable(True, pColumnList.ToArray)
rDataTable = rDataTable.Clone
'Import rows into original table structure
For Each pCurrentRowCopy In pNewDataTable.Rows
rDataTable.ImportRow(pCurrentRowCopy)
Next
End Sub
Always use heading tags for headings. The clue is in the name :)
If you don’t want them to be bold, change their style with CSS. For example:
<h3 class="list-heading">heading</h3>
<ul>
<li>list item </li>
<li>list item </li>
<li>list item </li>
</ul>
.list-heading {
font-weight: normal;
}
In HTML5, you can associate the heading and the list more clearly by using the <section>
element. (<section>
doesn’t work properly in IE 8 and earlier without some JavaScript though.)
<section>
<h1>heading</h1>
<ul>
<li>list item </li>
<li>list item </li>
<li>list item </li>
</ul>
</section>
You could do something similar in HTML 4:
<div class="list-with-heading">
<h3>Heading</h3>
<ul>
<li>list item </li>
<li>list item </li>
<li>list item </li>
</ul>
</div>
Then style thus:
.list-with-heading h3 {
font-weight: normal;
}
I worked out a working solution to this problem after 2 days of struggle, below solution is perfect for them who want to change few edit text only, change/toggle color through java code, and want to overcome the problems of different behavior on OS versions due to use setColorFilter() method.
import android.content.Context;
import android.graphics.PorterDuff;
import android.graphics.drawable.Drawable;
import android.support.v4.content.ContextCompat;
import android.support.v7.widget.AppCompatDrawableManager;
import android.support.v7.widget.AppCompatEditText;
import android.util.AttributeSet;
import com.newco.cooltv.R;
public class RqubeErrorEditText extends AppCompatEditText {
private int errorUnderlineColor;
private boolean isErrorStateEnabled;
private boolean mHasReconstructedEditTextBackground;
public RqubeErrorEditText(Context context) {
super(context);
initColors();
}
public RqubeErrorEditText(Context context, AttributeSet attrs) {
super(context, attrs);
initColors();
}
public RqubeErrorEditText(Context context, AttributeSet attrs, int defStyleAttr) {
super(context, attrs, defStyleAttr);
initColors();
}
private void initColors() {
errorUnderlineColor = R.color.et_error_color_rule;
}
public void setErrorColor() {
ensureBackgroundDrawableStateWorkaround();
getBackground().setColorFilter(AppCompatDrawableManager.getPorterDuffColorFilter(
ContextCompat.getColor(getContext(), errorUnderlineColor), PorterDuff.Mode.SRC_IN));
}
private void ensureBackgroundDrawableStateWorkaround() {
final Drawable bg = getBackground();
if (bg == null) {
return;
}
if (!mHasReconstructedEditTextBackground) {
// This is gross. There is an issue in the platform which affects container Drawables
// where the first drawable retrieved from resources will propogate any changes
// (like color filter) to all instances from the cache. We'll try to workaround it...
final Drawable newBg = bg.getConstantState().newDrawable();
//if (bg instanceof DrawableContainer) {
// // If we have a Drawable container, we can try and set it's constant state via
// // reflection from the new Drawable
// mHasReconstructedEditTextBackground =
// DrawableUtils.setContainerConstantState(
// (DrawableContainer) bg, newBg.getConstantState());
//}
if (!mHasReconstructedEditTextBackground) {
// If we reach here then we just need to set a brand new instance of the Drawable
// as the background. This has the unfortunate side-effect of wiping out any
// user set padding, but I'd hope that use of custom padding on an EditText
// is limited.
setBackgroundDrawable(newBg);
mHasReconstructedEditTextBackground = true;
}
}
}
public boolean isErrorStateEnabled() {
return isErrorStateEnabled;
}
public void setErrorState(boolean isErrorStateEnabled) {
this.isErrorStateEnabled = isErrorStateEnabled;
if (isErrorStateEnabled) {
setErrorColor();
invalidate();
} else {
getBackground().mutate().clearColorFilter();
invalidate();
}
}
}
Uses in xml
<com.rqube.ui.widget.RqubeErrorEditText
android:id="@+id/f_signup_et_referral_code"
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:layout_alignParentTop="true"
android:layout_toEndOf="@+id/referral_iv"
android:layout_toRightOf="@+id/referral_iv"
android:ems="10"
android:hint="@string/lbl_referral_code"
android:imeOptions="actionNext"
android:inputType="textEmailAddress"
android:textSize="@dimen/text_size_sp_16"
android:theme="@style/EditTextStyle"/>
Add lines in style
<style name="EditTextStyle" parent="android:Widget.EditText">
<item name="android:textColor">@color/txt_color_change</item>
<item name="android:textColorHint">@color/et_default_color_text</item>
<item name="colorControlNormal">@color/et_default_color_rule</item>
<item name="colorControlActivated">@color/et_engagged_color_rule</item>
</style>
java code to toggle color
myRqubeEditText.setErrorState(true);
myRqubeEditText.setErrorState(false);
You can stash
(save the changes in temporary box) then, back to master
branch HEAD.
$ git add .
$ git stash
$ git checkout master
Jump Over Commits Back and Forth:
Go to a specific commit-sha
.
$ git checkout <commit-sha>
If you have uncommitted changes here then, you can checkout to a new branch | Add | Commit | Push the current branch to the remote.
# checkout a new branch, add, commit, push
$ git checkout -b <branch-name>
$ git add .
$ git commit -m 'Commit message'
$ git push origin HEAD # push the current branch to remote
$ git checkout master # back to master branch now
If you have changes in the specific commit and don't want to keep the changes, you can do stash
or reset
then checkout to master
(or, any other branch).
# stash
$ git add -A
$ git stash
$ git checkout master
# reset
$ git reset --hard HEAD
$ git checkout master
After checking out a specific commit if you have no uncommitted change(s) then, just back to master
or other
branch.
$ git status # see the changes
$ git checkout master
# or, shortcut
$ git checkout - # back to the previous state
For the listed three conditions only, these expressions might work also:
^\d{5}[-\s]?(?:\d{4})?$
^\[0-9]{5}[-\s]?(?:[0-9]{4})?$
^\[0-9]{5}[-\s]?(?:\d{4})?$
^\d{5}[-\s]?(?:[0-9]{4})?$
If we would have had unexpected additional spaces in between 5 and 4 digits or a continuous 9 digits zip code, such as:
123451234
12345 1234
12345 1234
this expression for instance would be a secondary option with less constraints:
^\d{5}([-]|\s*)?(\d{4})?$
jex.im visualizes regular expressions:
const regex = /^\d{5}[-\s]?(?:\d{4})?$/gm;_x000D_
const str = `12345_x000D_
12345-6789_x000D_
12345 1234_x000D_
123451234_x000D_
12345 1234_x000D_
12345 1234_x000D_
1234512341_x000D_
123451`;_x000D_
let m;_x000D_
_x000D_
while ((m = regex.exec(str)) !== null) {_x000D_
// This is necessary to avoid infinite loops with zero-width matches_x000D_
if (m.index === regex.lastIndex) {_x000D_
regex.lastIndex++;_x000D_
}_x000D_
_x000D_
// The result can be accessed through the `m`-variable._x000D_
m.forEach((match, groupIndex) => {_x000D_
console.log(`Found match, group ${groupIndex}: ${match}`);_x000D_
});_x000D_
}
_x000D_
Right click the Resources
folder and select Build Path > Add to Build Path
Sub systemcmd(ByVal cmd As String)
Shell("cmd /c """ & cmd & """", AppWinStyle.MinimizedFocus, True)
End Sub
So here is the scenario that I faced, and how I solved it.
[branch-a]
[Hundreds of commits] -> [R] -> [I]
here R
is the commit that I needed to be removed, and I
is a single commit that comes after R
I made a revert commit and squashed them together
git revert [commit id of R]
git rebase -i HEAD~3
During the interactive rebase squash the last 2 commits.
The error means that you are providing not as much data as the table wp_posts
does contain columns. And now the DB engine does not know in which columns to put your data.
To overcome this you must provide the names of the columns you want to fill. Example:
insert into wp_posts (column_name1, column_name2)
values (1, 3)
Look up the table definition and see which columns you want to fill.
And insert
means you are inserting a new record. You are not modifying an existing one. Use update
for that.
Here's a way to convert binary numbers to ASCII characters that is often simple enough to do in your head.
1 - Convert every 4 binary digits into one hex digit.
Here's a binary to hex conversion chart:
0001 = 1
0010 = 2
0011 = 3
0100 = 4
0101 = 5
0110 = 6
0111 = 7
1000 = 8
1001 = 9
1010 = a (the hex number a, not the letter a)
1011 = b
1100 = c
1101 = d
1110 = e
1111 = f
(The hexadecimal numbers a through f are the decimal numbers 10 through 15. That's what hexadecimal, or "base 16" is - instead of each digit being capable of representing 10 different numbers [0 - 9], like decimal or "base 10" does, each digit is instead capable of representing 16 different numbers [0 - f].)
Once you know that chart, converting any string of binary digits into a string of hex digits is simple.
For example,
01000100 = 0100 0100 = 44 hex
1010001001110011 = 1010 0010 0111 0011 = a273 hex
Simple enough, right? It is a simple matter to convert a binary number of any length into its hexadecimal equivalent.
(This works because hexadecimal is base 16 and binary is base 2 and 16 is the 4th power of 2, so it takes 4 binary digits to make 1 hex digit. 10, on the other hand, is not a power of 2, so we can't convert binary to decimal nearly as easily.)
2 - Split the string of hex digits into pairs.
When converting a number into ASCII, every 2 hex digits is a character. So break the hex string into sets of 2 digits.
You would split a hex number like 7340298b392 this into 6 pairs, like this:
7340298b392 = 07 34 02 98 b3 92
(Notice I prepended a 0, since I had an odd number of hex digits.)
That's 6 pairs of hex digits, so its going to be 6 letters. (Except I know right away that 98, b3 and 92 aren't letters. I'll explain why in a minute.)
3 - Convert each pair of hex digits into a decimal number.
Do this by multiplying the (decimal equivalent of the) left digit by 16, and adding the 2nd.
For example, b3 hex = 11*16 + 3, which is 110 + 66 + 3, which is 179. (b hex is 11 decimal.)
4 - Convert the decimal numbers into ASCII characters.
Now, to get the ASCII letters for the decimal numbers, simply keep in mind that in ASCII, 65 is an uppercase 'A', and 97 is a lowercase 'a'.
So what letter is 68?
68 is the 4th letter of the alphabet in uppercase, right?
65 = A, 66 = B, 67 = C, 68 = D.
So 68 is 'D'.
You take the decimal number, subtract 64 for uppercase letters if the number is less than 97, or 96 for lowercase letters if the number is 97 or larger, and that's the number of the letter of the alphabet associated with that set of 2 hex digits.
Alternatively, if you're not afraid of a little bit of easy hex arithmetic, you can skip step 3, and just go straight from hex to ASCII, by remembering, for example, that
hex 41 = 'A'
hex 61 = 'a'
So subtract 40 hex for uppercase letters or 60 hex for lowercase letters, and convert what's left to decimal to get the alphabet letter number.
For example
01101100 = 6c, 6c - 60 = c = 12 decimal = 'l'
01010010 = 52, 52 - 40 = 12 hex = 18 decimal = 'R'
(When doing this, it's helpful to remember that 'm' (or 'M') is the 13 letter of the alphabet. So you can count up or down from 13 to find a letter that's nearer to the middle than to either end.)
I saw this on a shirt once, and was able to read it in my head:
01000100
01000001
01000100
I did it like this:
01000100 = 0100 0100 = 44 hex, - 40 hex = ucase letter 4 = D
01000001 = 0100 0001 = 41 hex, - 40 hex = ucase letter 1 = A
01000100 = 0100 0100 = 44 hex, - 40 hex = ucase letter 4 = D
The shirt said "DAD", which I thought was kinda cool, since it was being purchased by a pregnant woman. Her husband must be a geek like me.
How did I know right away that 92, b3, and 98 were not letters?
Because the ASCII code for a lowercase 'z' is 96 + 26 = 122, which in hex is 7a. 7a is the largest hex number for a letter. Anything larger than 7a is not a letter.
So that's how you can do it as a human.
How do computer programs do it?
For each set of 8 binary digits, convert it to a number, and look it up in an ASCII table.
(That's one pretty obvious and straight forward way. A typical programmer could probably think of 10 or 15 other ways in the space of a few minutes. The details depend on the computer language environment.)
Inheritance creates a strong relationship between a subclass and super class; subclass must be aware of super class'es implementation details. Creating the super class is much harder, when you have to think about how it can be extended. You have to document class invariants carefully, and state what other methods overridable methods use internally.
Inheritance is sometimes useful, if the hierarchy really represents a is-a-relationship. It relates to Open-Closed Principle, which states that classes should be closed for modification but open to extension. That way you can have polymorphism; to have a generic method that deals with super type and its methods, but via dynamic dispatch the method of subclass is invoked. This is flexible, and helps to create indirection, which is essential in software (to know less about implementation details).
Inheritance is easily overused, though, and creates additional complexity, with hard dependencies between classes. Also understanding what happens during execution of a program gets pretty hard due to layers and dynamic selection of method calls.
I would suggest using composing as the default. It is more modular, and gives the benefit of late binding (you can change the component dynamically). Also it's easier to test the things separately. And if you need to use a method from a class, you are not forced to be of certain form (Liskov Substitution Principle).
All your exercise conditionals are separate and the else is only tied to the last if statement. Use else if
to bind them all together in the way I believe you intend.
You could read the entire file with dynamic memory allocation, but isn't a good idea because if the file is too big, you could have memory problems.
So is better read short parts of the file and print it.
#include <stdio.h>
#define BLOCK 1000
int main() {
FILE *f=fopen("teste.txt","r");
int size;
char buffer[BLOCK];
// ...
while((size=fread(buffer,BLOCK,sizeof(char),f)>0)
fwrite(buffer,size,sizeof(char),stdout);
fclose(f);
// ...
return 0;
}
I am so used to typing at the end of these comparison methods: , StringComparison.
So I made an extension.
namespace System
{ public static class StringExtension
{
public static bool Equals(this string thisString, string compareString,
StringComparison stringComparison)
{
return string.Equals(thisString, compareString, stringComparison);
}
}
}
Just note that you will need to check for null on thisString
prior to calling the ext.
This is not a new answer, but it helped me to understand the different aspects of the answers above (and it is too much for a comment).
Using Git Bash just try:
me@pc MINGW64 /c/Test
$ ls -al
total 16
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:35 ./
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:11 ../
me@pc MINGW64 /c/Test
$ git init
Initialized empty Git repository in C:/Test/.git/
me@pc MINGW64 /c/Test (master)
$ ls -al
total 20
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:35 ./
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:11 ../
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:35 .git/
me@pc MINGW64 /c/Test (master)
$ cd .git
me@pc MINGW64 /c/Test/.git (GIT_DIR!)
$ ls -al
total 15
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:35 ./
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:35 ../
-rw-r--r-- 1 myid 1049089 130 Apr 1 11:35 config
-rw-r--r-- 1 myid 1049089 73 Apr 1 11:35 description
-rw-r--r-- 1 myid 1049089 23 Apr 1 11:35 HEAD
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:35 hooks/
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:35 info/
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:35 objects/
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:35 refs/
Same with git --bare
:
me@pc MINGW64 /c/Test
$ ls -al
total 16
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:36 ./
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:11 ../
me@pc MINGW64 /c/Test
$ git init --bare
Initialized empty Git repository in C:/Test/
me@pc MINGW64 /c/Test (BARE:master)
$ ls -al
total 23
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:36 ./
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:11 ../
-rw-r--r-- 1 myid 1049089 104 Apr 1 11:36 config
-rw-r--r-- 1 myid 1049089 73 Apr 1 11:36 description
-rw-r--r-- 1 myid 1049089 23 Apr 1 11:36 HEAD
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:36 hooks/
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:36 info/
drwxr-xr-x 1 myid 1049089 0 Apr 1 11:36 objects/
You can use Autohotkey
, download it from: http://ahkscript.org/download/
After the installation, if you want to open Gmail website when you press Alt+g, you can do something like this:
!g::
Run www.gmail.com
return
Further reference: Hotkeys (Mouse, Joystick and Keyboard Shortcuts)
*nix provides a nice little command which makes our lives a lot easier.
GET:
with JSON:
curl -i -H "Accept: application/json" -H "Content-Type: application/json" -X GET http://hostname/resource
with XML:
curl -H "Accept: application/xml" -H "Content-Type: application/xml" -X GET http://hostname/resource
POST:
For posting data:
curl --data "param1=value1¶m2=value2" http://hostname/resource
For file upload:
curl --form "[email protected]" http://hostname/resource
RESTful HTTP Post:
curl -X POST -d @filename http://hostname/resource
For logging into a site (auth):
curl -d "username=admin&password=admin&submit=Login" --dump-header headers http://localhost/Login
curl -L -b headers http://localhost/
Pretty-printing the curl results:
For JSON:
If you use npm
and nodejs
, you can install json
package by running this command:
npm install -g json
Usage:
curl -i -H "Accept: application/json" -H "Content-Type: application/json" -X GET http://hostname/resource | json
If you use pip
and python
, you can install pjson
package by running this command:
pip install pjson
Usage:
curl -i -H "Accept: application/json" -H "Content-Type: application/json" -X GET http://hostname/resource | pjson
If you use Python 2.6+, json tool is bundled within.
Usage:
curl -i -H "Accept: application/json" -H "Content-Type: application/json" -X GET http://hostname/resource | python -m json.tool
If you use gem
and ruby
, you can install colorful_json
package by running this command:
gem install colorful_json
Usage:
curl -i -H "Accept: application/json" -H "Content-Type: application/json" -X GET http://hostname/resource | cjson
If you use apt-get
(aptitude package manager of your Linux distro), you can install yajl-tools
package by running this command:
sudo apt-get install yajl-tools
Usage:
curl -i -H "Accept: application/json" -H "Content-Type: application/json" -X GET http://hostname/resource | json_reformat
For XML:
If you use *nix with Debian/Gnome envrionment, install libxml2-utils
:
sudo apt-get install libxml2-utils
Usage:
curl -H "Accept: application/xml" -H "Content-Type: application/xml" -X GET http://hostname/resource | xmllint --format -
or install tidy
:
sudo apt-get install tidy
Usage:
curl -H "Accept: application/xml" -H "Content-Type: application/xml" -X GET http://hostname/resource | tidy -xml -i -
Saving the curl response to a file
curl http://hostname/resource >> /path/to/your/file
or
curl http://hostname/resource -o /path/to/your/file
For detailed description of the curl command, hit:
man curl
For details about options/switches of the curl command, hit:
curl -h
If you really need a "Backup" then you also need database schema, like table definitions, view definitions, store procedures and so on. A backup of a database isn't just the data.
The value of the mysqldump format for backup is specifically that it is very EASY to use it to restore mysql databases. A backup that isn't easily restored is far less useful. If you are looking for a method to reliably backup mysql data to so you can restore to a mysql server then I think you should stick with the mysqldump tool.
Mysql is free and runs on many different platforms. Setting up a new mysql server that I can restore to is simple. I am not at all worried about not being able to setup mysql so I can do a restore.
I would be far more worried about a custom backup/restore based on a fragile format like csv/tsv failing. Are you sure that all your quotes, commas, or tabs that are in your data would get escaped correctly and then parsed correctly by your restore tool?
If you are looking for a method to extract the data then see several in the other answers.
My solution is like this. It's not 100% bulletproof but I think it will save you for the most of the cases.
When user logged in successfully create a string with this information:
$data = (SALT + ":" + hash(User Agent) + ":" + username
+ ":" + LoginTimestamp + ":"+ SALT)
Encrypt $data
, set type to HttpOnly and set cookie.
When user come back to your site, Make this steps:
:
character. If user signouts, remove this cookie. Create new cookie if user re-logins.
Drive letters can be used in the target like
scp some_file user@host:/c/temp
where c
is the drive letter. It's treated like a directory.
Maybe this works on the source, too.
Bind variable can be used in Oracle SQL query with "in" clause.
Works in 10g; I don't know about other versions.
Bind variable is varchar up to 4000 characters.
Example: Bind variable containing comma-separated list of values, e.g.
:bindvar = 1,2,3,4,5
select * from mytable
where myfield in
(
SELECT regexp_substr(:bindvar,'[^,]+', 1, level) items
FROM dual
CONNECT BY regexp_substr(:bindvar, '[^,]+', 1, level) is not null
);
(Same info as I posted here: How do you specify IN clause in a dynamic query using a variable? )
A nice web based tool is ungit. It runs on any platform that node.js & git supports. There is a video of how it works for those that find that sort of things easier than reading...
You can load local CSV file to Hive only if:
hive
or beeline
for upload.For me this problem keeps appearing after I run the APK at first time. Invalidating did not help.
However, I came with a workaround:
Just run the APK, and while it's running you can submit your changes clicking the "Lightning" button (Apply changes) next to to the "Run" button at the top right panel. Works charming for me, when making changes to the layout.
You can use this function
var datastring = $("#contactForm").serialize();
$.ajax({
type: "POST",
url: "your url.php",
data: datastring,
dataType: "json",
success: function(data) {
//var obj = jQuery.parseJSON(data); if the dataType is not specified as json uncomment this
// do what ever you want with the server response
},
error: function() {
alert('error handling here');
}
});
return type is json
EDIT: I use event.preventDefault
to prevent the browser getting submitted in such scenarios.
Adding more data to the answer.
dataType: "jsonp"
if it is a cross-domain call.
beforeSend:
// this is a pre-request call back function
complete:
// a function to be called after the request ends.so code that has to be executed regardless of success or error can go here
async:
// by default, all requests are sent asynchronously
cache:
// by default true. If set to false, it will force requested pages not to be cached by the browser.
Find the official page here
possible duplicate , best way to achieve same as stated below:
function getKey(key) {
return `${key}`;
}
var obj = {key1: "value1", key2: "value2", [getKey('key3')]: "value3"};
declare class member
static int i = 0;
mNotificationManager.notify(++i, mBuilder.build());
If the server responds to an OPTIONS method and to GET and POST (whichever of them you're using) with a header like:
Access-Control-Allow-Origin: *
It might work OK. Seems to in FireFox 3.5 and rekonq 0.4.0. Apparently, with that header and the initial response to OPTIONS, the server is saying to the browser, "Go ahead and let this cross-domain request go through."
My problem was that I hadn't built the project yet (oops). Don't know if this really helps anyone, but just make sure you build everything before clicking links.
I had a similar problem and I did something like the below mentioned steps with my Path environment variable to fix the problem
Located where my Anaconda3 was installed. I run Windows 7. Mine is located at C:\ProgramData\Anaconda3.
Open Control Panel - System - Advanced System Settings, under Advanced tab click on Environment Variables.
Under System Variables, located "Path" add the following: C:\ProgramData\Anaconda3\Scripts;C:\ProgramData\Anaconda3\;
Save and open new terminal. type in "conda". It worked for me.
Hope these steps help
This is not possible from HTML on. The closest what you can get is the accept-charset
attribute of the <form>
. Only MSIE browser adheres that, but even then it is doing it wrong (e.g. CP1252 is actually been used when it says that it has sent ISO-8859-1). Other browsers are fully ignoring it and they are using the charset as specified in the Content-Type
header of the response. Setting the character encoding right is basically fully the responsiblity of the server side. The client side should just send it back in the same charset as the server has sent the response in.
To the point, you should really configure the character encoding stuff entirely from the server side on. To overcome the inability to edit URIEncoding
attribute, someone here on SO wrote a (complex) filter: Detect the URI encoding automatically in Tomcat. You may find it useful as well (note: I haven't tested it).
Update:
Noted should be that the meta tag as given in your question is ignored when the content is been transferred over HTTP. Instead, the HTTP response Content-Type
header will be used to determine the content type and character encoding. You can determine the HTTP header with for example Firebug, in the Net panel.
Last-Modified : The last modified date for the requested object
If-Modified-Since : Allows a 304 Not Modified to be returned if last modified date is unchanged.
ETag : An ETag is an opaque identifier assigned by a web server to a specific version of a resource found at a URL. If the resource representation at that URL ever changes, a new and different ETag is assigned.
If-None-Match : Allows a 304 Not Modified to be returned if ETag is unchanged.
the browser store cache with a date(Last-Modified) or id(ETag), when you need to request the URL again, the browser send request message with the header:
the server will return 304 when the if statement is False, and browser will use cache.
You can just use the View.setId(integer)
for this. In the XML, even though you're setting a String id, this gets converted into an integer. Due to this, you can use any (positive) Integer for the Views
you add programmatically.
According to
View
documentationThe identifier does not have to be unique in this view's hierarchy. The identifier should be a positive number.
So you can use any positive integer you like, but in this case there can be some views with equivalent id's. If you want to search for some view in hierarchy calling to setTag with some key objects may be handy.
Credits to this answer.
Use the command:
hive -e "use [database_name]; select * from [table_name] LIMIT 10;" > /path/to/file/my_file_name.csv
I had a huge dataset whose details I was trying to organize and determine the types of attacks and the numbers of each type. An example that I used on my practice that worked (and had a little more details) goes something like this:
hive -e "use DataAnalysis;
select attack_cat,
case when attack_cat == 'Backdoor' then 'Backdoors'
when length(attack_cat) == 0 then 'Normal'
when attack_cat == 'Backdoors' then 'Backdoors'
when attack_cat == 'Fuzzers' then 'Fuzzers'
when attack_cat == 'Generic' then 'Generic'
when attack_cat == 'Reconnaissance' then 'Reconnaissance'
when attack_cat == 'Shellcode' then 'Shellcode'
when attack_cat == 'Worms' then 'Worms'
when attack_cat == 'Analysis' then 'Analysis'
when attack_cat == 'DoS' then 'DoS'
when attack_cat == 'Exploits' then 'Exploits'
when trim(attack_cat) == 'Fuzzers' then 'Fuzzers'
when trim(attack_cat) == 'Shellcode' then 'Shellcode'
when trim(attack_cat) == 'Reconnaissance' then 'Reconnaissance' end,
count(*) from actualattacks group by attack_cat;">/root/data/output/results2.csv
Here is a new example that works on windows 10. When using the windows10 sdk you have to use CreateProcessW instead. This example is commented and hopefully self explanatory.
#ifdef _WIN32
#include <Windows.h>
#include <iostream>
#include <stdio.h>
#include <tchar.h>
#include <cstdlib>
#include <string>
#include <algorithm>
class process
{
public:
static PROCESS_INFORMATION launchProcess(std::string app, std::string arg)
{
// Prepare handles.
STARTUPINFO si;
PROCESS_INFORMATION pi; // The function returns this
ZeroMemory( &si, sizeof(si) );
si.cb = sizeof(si);
ZeroMemory( &pi, sizeof(pi) );
//Prepare CreateProcess args
std::wstring app_w(app.length(), L' '); // Make room for characters
std::copy(app.begin(), app.end(), app_w.begin()); // Copy string to wstring.
std::wstring arg_w(arg.length(), L' '); // Make room for characters
std::copy(arg.begin(), arg.end(), arg_w.begin()); // Copy string to wstring.
std::wstring input = app_w + L" " + arg_w;
wchar_t* arg_concat = const_cast<wchar_t*>( input.c_str() );
const wchar_t* app_const = app_w.c_str();
// Start the child process.
if( !CreateProcessW(
app_const, // app path
arg_concat, // Command line (needs to include app path as first argument. args seperated by whitepace)
NULL, // Process handle not inheritable
NULL, // Thread handle not inheritable
FALSE, // Set handle inheritance to FALSE
0, // No creation flags
NULL, // Use parent's environment block
NULL, // Use parent's starting directory
&si, // Pointer to STARTUPINFO structure
&pi ) // Pointer to PROCESS_INFORMATION structure
)
{
printf( "CreateProcess failed (%d).\n", GetLastError() );
throw std::exception("Could not create child process");
}
else
{
std::cout << "[ ] Successfully launched child process" << std::endl;
}
// Return process handle
return pi;
}
static bool checkIfProcessIsActive(PROCESS_INFORMATION pi)
{
// Check if handle is closed
if ( pi.hProcess == NULL )
{
printf( "Process handle is closed or invalid (%d).\n", GetLastError());
return FALSE;
}
// If handle open, check if process is active
DWORD lpExitCode = 0;
if( GetExitCodeProcess(pi.hProcess, &lpExitCode) == 0)
{
printf( "Cannot return exit code (%d).\n", GetLastError() );
throw std::exception("Cannot return exit code");
}
else
{
if (lpExitCode == STILL_ACTIVE)
{
return TRUE;
}
else
{
return FALSE;
}
}
}
static bool stopProcess( PROCESS_INFORMATION &pi)
{
// Check if handle is invalid or has allready been closed
if ( pi.hProcess == NULL )
{
printf( "Process handle invalid. Possibly allready been closed (%d).\n");
return 0;
}
// Terminate Process
if( !TerminateProcess(pi.hProcess,1))
{
printf( "ExitProcess failed (%d).\n", GetLastError() );
return 0;
}
// Wait until child process exits.
if( WaitForSingleObject( pi.hProcess, INFINITE ) == WAIT_FAILED)
{
printf( "Wait for exit process failed(%d).\n", GetLastError() );
return 0;
}
// Close process and thread handles.
if( !CloseHandle( pi.hProcess ))
{
printf( "Cannot close process handle(%d).\n", GetLastError() );
return 0;
}
else
{
pi.hProcess = NULL;
}
if( !CloseHandle( pi.hThread ))
{
printf( "Cannot close thread handle (%d).\n", GetLastError() );
return 0;
}
else
{
pi.hProcess = NULL;
}
return 1;
}
};//class process
#endif //win32
How to handle authentication in a RESTful Client-Server architecture is a matter of debate.
Commonly, it can be achieved, in the SOA over HTTP world via:
You'll have to adapt, or even better mix those techniques, to match your software architecture at best.
Each authentication scheme has its own PROs and CONs, depending on the purpose of your security policy and software architecture.
HTTP basic auth over HTTPS
This first solution, based on the standard HTTPS protocol, is used by most web services.
GET /spec.html HTTP/1.1
Host: www.example.org
Authorization: Basic QWxhZGRpbjpvcGVuIHNlc2FtZQ==
It's easy to implement, available by default on all browsers, but has some known drawbacks, like the awful authentication window displayed on the Browser, which will persist (there is no LogOut-like feature here), some server-side additional CPU consumption, and the fact that the user-name and password are transmitted (over HTTPS) into the Server (it should be more secure to let the password stay only on the client side, during keyboard entry, and be stored as secure hash on the Server).
We may use Digest Authentication, but it requires also HTTPS, since it is vulnerable to MiM or Replay attacks, and is specific to HTTP.
Session via Cookies
To be honest, a session managed on the Server is not truly Stateless.
One possibility could be to maintain all data within the cookie content. And, by design, the cookie is handled on the Server side (Client, in fact, does even not try to interpret this cookie data: it just hands it back to the server on each successive request). But this cookie data is application state data, so the client should manage it, not the server, in a pure Stateless world.
GET /spec.html HTTP/1.1
Host: www.example.org
Cookie: theme=light; sessionToken=abc123
The cookie technique itself is HTTP-linked, so it's not truly RESTful, which should be protocol-independent, IMHO. It is vulnerable to MiM or Replay attacks.
Granted via Token (OAuth2)
An alternative is to put a token within the HTTP headers so that the request is authenticated. This is what OAuth 2.0 does, for instance. See the RFC 6749:
GET /resource/1 HTTP/1.1
Host: example.com
Authorization: Bearer mF_9.B5f-4.1JqM
In short, this is very similar to a cookie and suffers to the same issues: not stateless, relying on HTTP transmission details, and subject to a lot of security weaknesses - including MiM and Replay - so is to be used only over HTTPS. Typically, a JWT is used as a token.
Query Authentication
Query Authentication consists in signing each RESTful request via some additional parameters on the URI. See this reference article.
It was defined as such in this article:
All REST queries must be authenticated by signing the query parameters sorted in lower-case, alphabetical order using the private credential as the signing token. Signing should occur before URL encoding the query string.
This technique is perhaps the more compatible with a Stateless architecture, and can also be implemented with a light session management (using in-memory sessions instead of DB persistence).
For instance, here is a generic URI sample from the link above:
GET /object?apiKey=Qwerty2010
should be transmitted as such:
GET /object?timestamp=1261496500&apiKey=Qwerty2010&signature=abcdef0123456789
The string being signed is /object?apikey=Qwerty2010×tamp=1261496500
and the signature is the SHA256 hash of that string using the private component of the API key.
Server-side data caching can be always available. For instance, in our framework, we cache the responses at the SQL level, not at the URI level. So adding this extra parameter doesn't break the cache mechanism.
See this article for some details about RESTful authentication in our client-server ORM/SOA/MVC framework, based on JSON and REST. Since we allow communication not only over HTTP/1.1, but also named pipes or GDI messages (locally), we tried to implement a truly RESTful authentication pattern, and not rely on HTTP specificity (like header or cookies).
Later Note: adding a signature in the URI can be seen as bad practice (since for instance it will appear in the http server logs) so it has to be mitigated, e.g. by a proper TTL to avoid replays. But if your http logs are compromised, you will certainly have bigger security problems.
In practice, the upcoming MAC Tokens Authentication for OAuth 2.0 may be a huge improvement in respect to the "Granted by Token" current scheme. But this is still a work in progress and is tied to HTTP transmission.
Conclusion
It's worth concluding that REST is not only HTTP-based, even if, in practice, it's also mostly implemented over HTTP. REST can use other communication layers. So a RESTful authentication is not just a synonym of HTTP authentication, whatever Google answers. It should even not use the HTTP mechanism at all but shall be abstracted from the communication layer. And if you use HTTP communication, thanks to the Let's Encrypt initiative there is no reason not to use proper HTTPS, which is required in addition to any authentication scheme.
For me, Firefox has stored session id (PHPSESSID) in a cookie, but Google Chrome has used GET or POST parameter. So you only have to ensure that the returning script (for me: paypal checkout) commit PHPSESSID in url or POST parameter.
There are (at least) two things you can do here–you can reclone the remote repo, or you can reset --hard
to the common ancestor and then do a pull, which will fast-forward to the latest commit on the remote master.
To be concrete, here's a simple extension of Nevik Rehnel's original answer:
git reset --hard origin/master
git pull origin master
NOTE: using git reset --hard
will discard any uncommitted changes, and it can be easy to confuse yourself with this command if you're new to git, so make sure you have a sense of what it is going to do before proceeding.
Truly, the question stated above is an programming issue. How would you like to program your code? Where do you need the 'STR' to be accessed? There is no use of declaring a variable which is used locally as a global variable. Basics of programming I believe.
You have to create a symlink to your mysql installation if it is not the most recent version of mysql.
$ brew link --force [email protected]
If the strings are different (ie: [foo] & [/foo]), take a look at this post from Justin Cook. I copy his code below:
function get_string_between($string, $start, $end){
$string = ' ' . $string;
$ini = strpos($string, $start);
if ($ini == 0) return '';
$ini += strlen($start);
$len = strpos($string, $end, $ini) - $ini;
return substr($string, $ini, $len);
}
$fullstring = 'this is my [tag]dog[/tag]';
$parsed = get_string_between($fullstring, '[tag]', '[/tag]');
echo $parsed; // (result = dog)
Or you can use an arrow function to define it:
$(document).ready(() => {
$('#bfCaptchaEntry').click(()=>{
});
});
For better browser support:
$(document).ready(function() {
$('#bfCaptchaEntry').click(function (){
});
});
None of the answers worked and then I was forgetting to set minimum deployment target which can be found in Project -> General -> Deployment Info -> Deployment Target -> 8.0
You urls are not in the same repository, so you can't do it with the svn diff
command.
svn: 'http://svn.boost.org/svn/boost/sandbox/boost/extension' isn't in the same repository as 'http://cloudobserver.googlecode.com/svn'
Another way you could do it, is export each repos using svn export
, and then use the diff command to compare the 2 directories you exported.
// Export repositories
svn export http://svn.boost.org/svn/boost/sandbox/boost/extension/ repos1
svn export http://cloudobserver.googlecode.com/svn/branches/v0.4/Boost.Extension.Tutorial/libs/boost/extension/ repos2
// Compare exported directories
diff repos1 repos2 > file.diff
Share the lines of code executed when you make this request. There might be an error in your code.
Also, you can change the memory limit in your php.ini file via the memory_limit
setting. Try doubling your memory to 64M. If this doesn't work you can try doubling it again, but I'd bet the problem is in your code.
ini_set('memory_limit', '64M');
This is clearly a classpath problem. Take into consideration that the classpath must change a bit when you run your program outside the IDE. This is because the IDE loads the other JARs relative to the root folder of your project, while in the case of the final JAR this is usually not true.
What I like to do in these situations is build the JAR manually. It takes me at most 5 minutes and it always solves the problem. I do not suggest you do this. Find a way to use Maven, that's its purpose.
Using .enumerate()
works, but it does not provide the true index of the element; it only provides an Int beginning with 0 and incrementing by 1 for each successive element. This is usually irrelevant, but there is the potential for unexpected behavior when used with the ArraySlice
type. Take the following code:
let a = ["a", "b", "c", "d", "e"]
a.indices //=> 0..<5
let aSlice = a[1..<4] //=> ArraySlice with ["b", "c", "d"]
aSlice.indices //=> 1..<4
var test = [Int: String]()
for (index, element) in aSlice.enumerate() {
test[index] = element
}
test //=> [0: "b", 1: "c", 2: "d"] // indices presented as 0..<3, but they are actually 1..<4
test[0] == aSlice[0] // ERROR: out of bounds
It's a somewhat contrived example, and it's not a common issue in practice but still I think it's worth knowing this can happen.
For anyone who is looking for Swift 3 solution
let tap = UITapGestureRecognizer(target: self, action: #selector(self.handleTap(_:)))
view.addGestureRecognizer(tap)
view.isUserInteractionEnabled = true
self.view.addSubview(view)
// function which is triggered when handleTap is called
func handleTap(_ sender: UITapGestureRecognizer) {
print("Hello World")
}
Be aware that the third parameter (value) in the examples given above: the value is a constant (e.g. 'Z' or c(20,30)).
Defining the third parameter using values from the data frame itself can lead to confusion.
E.g. with a simple data frame such as this (using dplyr::data_frame):
tmp <- data_frame(a=1:10, b=sample(LETTERS[24:26], 10, replace=T))
This will create somthing like this:
a b
(int) (chr)
1 1 X
2 2 Y
3 3 Y
4 4 X
5 5 Z
..etc
Now suppose you want wanted to do, was to multiply the values in column 'a' by 2, but only where column 'b' is "X". My immediate thought would be something like this:
with(tmp, replace(a, b=="X", a*2))
That will not provide the desired outcome, however. The a*2 will defined as a fixed vector rather than a reference to the 'a' column. The vector 'a*2' will thus be
[1] 2 4 6 8 10 12 14 16 18 20
at the start of the 'replace' operation. Thus, the first row where 'b' equals "X", the value in 'a' will be placed by 2. The second time, it will be replaced by 4, etc ... it will not be replaced by two-times-the-value-of-a in that particular row.
If you want to handled the exception within the stream and continue processing the additional ones, there is an excellent article in DZone by Brian Vermeer using the concept of an Either. It shows an excellent way of handling this situation. The only thing missing is sample code. This is a sample of my exploration using the concepts from that article.
@Test
public void whenValuePrinted_thenPrintValue() {
List<Integer> intStream = Arrays.asList(0, 1, 2, 3, 4, 5, 6);
intStream.stream().map(Either.liftWithValue(item -> doSomething(item)))
.map(item -> item.isLeft() ? item.getLeft() : item.getRight())
.flatMap(o -> {
System.out.println(o);
return o.isPresent() ? Stream.of(o.get()) : Stream.empty();
})
.forEach(System.out::println);
}
private Object doSomething(Integer item) throws Exception {
if (item == 0) {
throw new Exception("Zero ain't a number!");
} else if (item == 4) {
return Optional.empty();
}
return item;
}
All other answers here depends on adding code the the notebook(!)
In my opinion is bad practice to hardcode a specific path into the notebook code, or otherwise depend on the location, since this makes it really hard to refactor you code later on. Instead I would recommend you to add the root project folder to PYTHONPATH when starting up your Jupyter notebook server, either directly from the project folder like so
env PYTHONPATH=`pwd` jupyter notebook
or if you are starting it up from somewhere else, use the absolute path like so
env PYTHONPATH=/Users/foo/bar/project/ jupyter notebook
Try this:
ng-if="details.Payment[0].Status != '6'".
Sorry about that, but I think you can use ng-show or ng-hide.
As a noobie I was confused by this until I realized that the so called "path" is the path relative to the MyClass.class file in the file system and not the MyClass.java file. My IDE copies the resources (like xx.jpg, xx.xml) to a directory local to the MyClass.class. For example, inside a pkg directory called "target/classes/pkg. The class-file location may be different for different IDE's and depending on how the build is structured for your application. You should first explore the file system and find the location of the MyClass.class file and the copied location of the associated resource you are seeking to extract. Then determine the path relative to the MyClass.class file and write that as a string value with "dots" and "slashes".
For example, here is how I make an app1.fxml file available to my javafx application where the relevant "MyClass.class" is implicitly "Main.class". The Main.java file is where this line of resource-calling code is contained. In my specific case the resources are copied to a location at the same level as the enclosing package folder. That is: /target/classes/pkg/Main.class and /target/classes/app1.fxml. So paraphrasing...the relative reference "../app1.fxml" is "start from Main.class, go up one directory level, now you can see the resource".
FXMLLoader loader = new FXMLLoader();
loader.setLocation(getClass().getResource("../app1.fxml"));
Note that in this relative-path string "../app1.fxml", the first two dots reference the directory enclosing Main.class and the single "." indicates a file extension to follow. After these details become second nature, you will forget why it was confusing.
To remove the leading 0 from month following statement will definitely work.
SELECT replace(left(Convert(nvarchar,GETDATE(),101),2),'0','')+RIGHT(Convert(nvarchar,GETDATE(),101),8)
Just Replace GETDATE()
with the date field of your Table.
I was having the same problem and everyone was talking about this is related to DNS configuration, which make sense, since your container maybe isn't knowing how to resolve the name of the domain where your database is.
I guess your can configure that at the moment you start your container, but I think it's better to config this once and for all.
I'm using Windows 10 and in this case docker's gui give us some facilities.
Just right click on docker's icon in the tray bar and select "Settings" item.
Then, on the Docker's window, select the "Network" section and change the DNS option from "Automatic" to "Fixed" and hit "Apply". Docker will restart itself after that. I putted the Google's DNS (8.8.8.8) and it worked fine to me.
Hope it helps.
This is the other way you can convert date format
<?php
$pastDate = "Tuesday 11th October, 2016";
$pastDate = str_replace(",","",$pastDate);
$date = new DateTime($pastDate);
$new_date_format = $date->format('Y-m-d');
echo $new_date_format.' 23:59:59'; ?>
In my case my test method was private I changed it to public and it worked.
This got it working for me:
:set tabstop=2 shiftwidth=2 expandtab | retab
var phonereg = /^(\+\d{1,3}[- ]?)?\d{10}$/;
Here is an example for all six boolean comparison operators (<, ==, >, >=, !=, <=):
BigDecimal big10 = new BigDecimal(10);
BigDecimal big20 = new BigDecimal(20);
System.out.println(big10.compareTo(big20) < -1); // false
System.out.println(big10.compareTo(big20) <= -1); // true
System.out.println(big10.compareTo(big20) == -1); // true
System.out.println(big10.compareTo(big20) >= -1); // true
System.out.println(big10.compareTo(big20) > -1); // false
System.out.println(big10.compareTo(big20) != -1); // false
System.out.println(big10.compareTo(big20) < 0); // true
System.out.println(big10.compareTo(big20) <= 0); // true
System.out.println(big10.compareTo(big20) == 0); // false
System.out.println(big10.compareTo(big20) >= 0); // false
System.out.println(big10.compareTo(big20) > 0); // false
System.out.println(big10.compareTo(big20) != 0); // true
System.out.println(big10.compareTo(big20) < 1); // true
System.out.println(big10.compareTo(big20) <= 1); // true
System.out.println(big10.compareTo(big20) == 1); // false
System.out.println(big10.compareTo(big20) >= 1); // false
System.out.println(big10.compareTo(big20) > 1); // false
System.out.println(big10.compareTo(big20) != 1); // true
Shared hosting no ssh or shell access?
Here is how i did it;
Alen Saqe's latest JSFiddle didn't toggle for me on Firefox, so I thought I would provide a simple html/javascript workaround that will function nicely within forms (regarding submission) until the day that the datalist tag is accepted by all browsers/devices. For more details and see it in action, go to: http://jsfiddle.net/6nq7w/4/ Note: Do not allow any spaces between toggling siblings!
<!DOCTYPE html>
<html>
<script>
function toggleField(hideObj,showObj){
hideObj.disabled=true;
hideObj.style.display='none';
showObj.disabled=false;
showObj.style.display='inline';
showObj.focus();
}
</script>
<body>
<form name="BrowserSurvey" action="#">
Browser: <select name="browser"
onchange="if(this.options[this.selectedIndex].value=='customOption'){
toggleField(this,this.nextSibling);
this.selectedIndex='0';
}">
<option></option>
<option value="customOption">[type a custom value]</option>
<option>Chrome</option>
<option>Firefox</option>
<option>Internet Explorer</option>
<option>Opera</option>
<option>Safari</option>
</select><input name="browser" style="display:none;" disabled="disabled"
onblur="if(this.value==''){toggleField(this,this.previousSibling);}">
<input type="submit" value="Submit">
</form>
</body>
</html>
Based on @user's answer, you can just add this extension anywhere in your app code and have your selection color directly in storyboard editor for every cells of your app :
@IBDesignable extension UITableViewCell {
@IBInspectable var selectedColor: UIColor? {
set {
if let color = newValue {
selectedBackgroundView = UIView()
selectedBackgroundView!.backgroundColor = color
} else {
selectedBackgroundView = nil
}
}
get {
return selectedBackgroundView?.backgroundColor
}
}
}
Dave answer is good. But I suggest this implementation which is more efficient and doesn't use nested loops.
def contains(small_list, big_list):
"""
Returns index of start of small_list in big_list if big_list
contains small_list, otherwise -1.
"""
loop = True
i, curr_id_small= 0, 0
while loop and i<len(big_list):
if big_list[i]==small_list[curr_id_small]:
if curr_id_small==len(small_list)-1:
loop = False
else:
curr_id_small += 1
else:
curr_id_small = 0
i=i+1
if not loop:
return i-len(small_list)
else:
return -1
To get the actual scrollable height of the areas scrolled by the window scrollbar, I used $('body').prop('scrollHeight')
. This seems to be the simplest working solution, but I haven't checked extensively for compatibility. Emanuele Del Grande notes on another solution that this probably won't work for IE below 8.
Most of the other solutions work fine for scrollable elements, but this works for the whole window. Notably, I had the same issue as Michael for Ankit's solution, namely, that $(document).prop('scrollHeight')
is returning undefined
.
You'll need to reload the table on the UI
thread via:
//swift 2.3
dispatch_async(dispatch_get_main_queue(), { () -> Void in
self.tableView.reloadData()
})
//swift 5
DispatchQueue.main.async{
self.tableView.reloadData()
}
Follow up:
An easier alternative to the connection.start()
approach is to instead use NSURLConnection.sendAsynchronousRequest(...)
//NSOperationQueue.mainQueue() is the main thread
NSURLConnection.sendAsynchronousRequest(NSURLRequest(URL: url), queue: NSOperationQueue.mainQueue()) { (response, data, error) -> Void in
//check error
var jsonError: NSError?
let json: AnyObject? = NSJSONSerialization.JSONObjectWithData(data, options: NSJSONReadingOptions.allZeros, error: &jsonError)
//check jsonError
self.collectionView?.reloadData()
}
This doesn't allow you the flexibility of tracking the bytes though, for example you might want to calculate the progress of the download via bytesDownloaded/bytesNeeded
Defining array with multiple types in TypeScript
Use a union type (string|number)[]
demo:
const foo: (string|number)[] = [ 1, "message" ];
I have an array of the form: [ 1, "message" ].
If you are sure that there are always only two elements [number, string]
then you can declare it as a tuple:
const foo: [number, string] = [ 1, "message" ];
We can solve this by using modulus operator (%)
26 % 7 = 5;
but 26 / 7 = 3 because it will give quotient but % operator will give remainder.