If website server is listening to a different port, then yes, simply use http://address:port/
If server is not listening to a different port, then obviously you cannot.
If you want to open it for a range and for a protocol
ufw allow 11200:11299/tcp
ufw allow 11200:11299/udp
The protocols used in IPv6 are the same as the protocols in IPv4. The only thing that changed between the two versions is the addressing scheme, DHCP [DHCPv6] and ICMP [ICMPv6]. So basically, anything TCP/UDP related, including the port range (0-65535) remains unchanged.
Edit: Port 0 is a reserved port in TCP but it does exist. See RFC793
Here are the three web pages on which we found the answer. The most difficult part was setting up static ports for SQLEXPRESS.
Provisioning a SQL Server Virtual Machine on Windows Azure. These initial instructions provided 25% of the answer.
How to Troubleshoot Connecting to the SQL Server Database Engine. Reading this carefully provided another 50% of the answer.
How to configure SQL server to listen on different ports on different IP addresses?. This enabled setting up static ports for named instances (eg SQLEXPRESS.) It took us the final 25% of the way to the answer.
The ports required will be different for your XMPP Server and any XMPP Clients. Most "modern" XMPP Servers follow the defined IANA Ports for Server-to-Server 5269 and for Client-to-Server 5222. Any additional ports depends on what features you enable on the Server, i.e. if you offer BOSH then you may need to open port 80.
File Transfer is highly dependent on both the Clients you use and the Server as to what port it will use, but most of them also negotiate the connect via your existing XMPP Client-to-Server link so the required port opening will be client side (or proxied via port 80.)
You should not use MAC, its bad way. Because some OS just changeing it every day. My expirience : Tools.CpuID.ProcessorId() + volumeSerial;
string volumeSerial = "";
try {
ManagementObject dsk = new ManagementObject(@"win32_logicaldisk.deviceid=""C:""");
dsk.Get();
volumeSerial = dsk["VolumeSerialNumber"].ToString();
} catch {
try {
ManagementObject dsk = new ManagementObject(@"win32_logicaldisk.deviceid=""D:""");
dsk.Get();
volumeSerial = dsk["VolumeSerialNumber"].ToString();
} catch { File.WriteAllText("disk.mising","need C or D"); Environment.Exit(0); }
}
public class CpuID
{
[DllImport("user32", EntryPoint = "CallWindowProcW", CharSet = CharSet.Unicode, SetLastError = true, ExactSpelling = true)]
private static extern IntPtr CallWindowProcW([In] byte[] bytes, IntPtr hWnd, int msg, [In, Out] byte[] wParam, IntPtr lParam);
[return: MarshalAs(UnmanagedType.Bool)]
[DllImport("kernel32", CharSet = CharSet.Unicode, SetLastError = true)]
public static extern bool VirtualProtect([In] byte[] bytes, IntPtr size, int newProtect, out int oldProtect);
const int PAGE_EXECUTE_READWRITE = 0x40;
public static string ProcessorId()
{
byte[] sn = new byte[8];
if (!ExecuteCode(ref sn))
return "ND";
return string.Format("{0}{1}", BitConverter.ToUInt32(sn, 4).ToString("X8"), BitConverter.ToUInt32(sn, 0).ToString("X8"));
}
private static bool ExecuteCode(ref byte[] result)
{
int num;
/* The opcodes below implement a C function with the signature:
* __stdcall CpuIdWindowProc(hWnd, Msg, wParam, lParam);
* with wParam interpreted as an 8 byte unsigned character buffer.
* */
byte[] code_x86 = new byte[] {
0x55, /* push ebp */
0x89, 0xe5, /* mov ebp, esp */
0x57, /* push edi */
0x8b, 0x7d, 0x10, /* mov edi, [ebp+0x10] */
0x6a, 0x01, /* push 0x1 */
0x58, /* pop eax */
0x53, /* push ebx */
0x0f, 0xa2, /* cpuid */
0x89, 0x07, /* mov [edi], eax */
0x89, 0x57, 0x04, /* mov [edi+0x4], edx */
0x5b, /* pop ebx */
0x5f, /* pop edi */
0x89, 0xec, /* mov esp, ebp */
0x5d, /* pop ebp */
0xc2, 0x10, 0x00, /* ret 0x10 */
};
byte[] code_x64 = new byte[] {
0x53, /* push rbx */
0x48, 0xc7, 0xc0, 0x01, 0x00, 0x00, 0x00, /* mov rax, 0x1 */
0x0f, 0xa2, /* cpuid */
0x41, 0x89, 0x00, /* mov [r8], eax */
0x41, 0x89, 0x50, 0x04, /* mov [r8+0x4], edx */
0x5b, /* pop rbx */
0xc3, /* ret */
};
byte[] code;
if (IsX64Process())
code = code_x64;
else
code = code_x86;
IntPtr ptr = new IntPtr(code.Length);
if (!VirtualProtect(code, ptr, PAGE_EXECUTE_READWRITE, out num))
Marshal.ThrowExceptionForHR(Marshal.GetHRForLastWin32Error());
ptr = new IntPtr(result.Length);
try {
return (CallWindowProcW(code, IntPtr.Zero, 0, result, ptr) != IntPtr.Zero);
} catch { System.Windows.Forms.MessageBox.Show("?????? ??????????"); return false; }
}
private static bool IsX64Process()
{
return IntPtr.Size == 8;
}
}
Yes. Try the following in your python interpreter:
and
>>>False and 3/0
False
>>>True and 3/0
ZeroDivisionError: integer division or modulo by zero
or
>>>True or 3/0
True
>>>False or 3/0
ZeroDivisionError: integer division or modulo by zero
You have to set seed every time you want to get a reproducible random result.
set.seed(1)
rnorm(4)
set.seed(1)
rnorm(4)
You can use operator Contains
,
private void ContainColumn(string columnName, DataTable table)
{
DataColumnCollection columns = table.Columns;
if (columns.Contains(columnName))
{
....
}
}
With the advent of .NET 4.0 (and higher) with the Stream.CopyTo() methods, I thought I would post an updated approach.
I also think the below version is useful as a clear example of a self-contained class for compressing regular strings to Base64 encoded strings, and vice versa:
public static class StringCompression
{
/// <summary>
/// Compresses a string and returns a deflate compressed, Base64 encoded string.
/// </summary>
/// <param name="uncompressedString">String to compress</param>
public static string Compress(string uncompressedString)
{
byte[] compressedBytes;
using (var uncompressedStream = new MemoryStream(Encoding.UTF8.GetBytes(uncompressedString)))
{
using (var compressedStream = new MemoryStream())
{
// setting the leaveOpen parameter to true to ensure that compressedStream will not be closed when compressorStream is disposed
// this allows compressorStream to close and flush its buffers to compressedStream and guarantees that compressedStream.ToArray() can be called afterward
// although MSDN documentation states that ToArray() can be called on a closed MemoryStream, I don't want to rely on that very odd behavior should it ever change
using (var compressorStream = new DeflateStream(compressedStream, CompressionLevel.Fastest, true))
{
uncompressedStream.CopyTo(compressorStream);
}
// call compressedStream.ToArray() after the enclosing DeflateStream has closed and flushed its buffer to compressedStream
compressedBytes = compressedStream.ToArray();
}
}
return Convert.ToBase64String(compressedBytes);
}
/// <summary>
/// Decompresses a deflate compressed, Base64 encoded string and returns an uncompressed string.
/// </summary>
/// <param name="compressedString">String to decompress.</param>
public static string Decompress(string compressedString)
{
byte[] decompressedBytes;
var compressedStream = new MemoryStream(Convert.FromBase64String(compressedString));
using (var decompressorStream = new DeflateStream(compressedStream, CompressionMode.Decompress))
{
using (var decompressedStream = new MemoryStream())
{
decompressorStream.CopyTo(decompressedStream);
decompressedBytes = decompressedStream.ToArray();
}
}
return Encoding.UTF8.GetString(decompressedBytes);
}
Here’s another approach using the extension methods technique to extend the String class to add string compression and decompression. You can drop the class below into an existing project and then use thusly:
var uncompressedString = "Hello World!";
var compressedString = uncompressedString.Compress();
and
var decompressedString = compressedString.Decompress();
To wit:
public static class Extensions
{
/// <summary>
/// Compresses a string and returns a deflate compressed, Base64 encoded string.
/// </summary>
/// <param name="uncompressedString">String to compress</param>
public static string Compress(this string uncompressedString)
{
byte[] compressedBytes;
using (var uncompressedStream = new MemoryStream(Encoding.UTF8.GetBytes(uncompressedString)))
{
using (var compressedStream = new MemoryStream())
{
// setting the leaveOpen parameter to true to ensure that compressedStream will not be closed when compressorStream is disposed
// this allows compressorStream to close and flush its buffers to compressedStream and guarantees that compressedStream.ToArray() can be called afterward
// although MSDN documentation states that ToArray() can be called on a closed MemoryStream, I don't want to rely on that very odd behavior should it ever change
using (var compressorStream = new DeflateStream(compressedStream, CompressionLevel.Fastest, true))
{
uncompressedStream.CopyTo(compressorStream);
}
// call compressedStream.ToArray() after the enclosing DeflateStream has closed and flushed its buffer to compressedStream
compressedBytes = compressedStream.ToArray();
}
}
return Convert.ToBase64String(compressedBytes);
}
/// <summary>
/// Decompresses a deflate compressed, Base64 encoded string and returns an uncompressed string.
/// </summary>
/// <param name="compressedString">String to decompress.</param>
public static string Decompress(this string compressedString)
{
byte[] decompressedBytes;
var compressedStream = new MemoryStream(Convert.FromBase64String(compressedString));
using (var decompressorStream = new DeflateStream(compressedStream, CompressionMode.Decompress))
{
using (var decompressedStream = new MemoryStream())
{
decompressorStream.CopyTo(decompressedStream);
decompressedBytes = decompressedStream.ToArray();
}
}
return Encoding.UTF8.GetString(decompressedBytes);
}
var s = '<div id="myDiv"></div>';
var htmlObject = document.createElement('div');
htmlObject.innerHTML = s;
htmlObject.getElementById("myDiv").style.marginTop = something;
To simplify Kirubaharan's answer a bit:
df['Datetime'] = pd.to_datetime(df['date'] + ' ' + df['time'])
df = df.set_index('Datetime')
And to get rid of unwanted columns (as OP did but did not specify per se in the question):
df = df.drop(['date','time'], axis=1)
You can use Boost.Predef
which contains various predefined macros for the target platform including the OS (BOOST_OS_*
). Yes boost is often thought as a C++ library, but this one is a preprocessor header that works with C as well!
This library defines a set of compiler, architecture, operating system, library, and other version numbers from the information it can gather of C, C++, Objective C, and Objective C++ predefined macros or those defined in generally available headers. The idea for this library grew out of a proposal to extend the Boost Config library to provide more, and consistent, information than the feature definitions it supports. What follows is an edited version of that brief proposal.
For example
#include <boost/predef.h>
#if defined(BOOST_OS_WINDOWS)
#elif defined(BOOST_OS_ANDROID)
#elif defined(BOOST_OS_LINUX)
#elif defined(BOOST_OS_BSD)
#elif defined(BOOST_OS_AIX)
#elif defined(BOOST_OS_HAIKU)
...
#endif
The full list can be found in BOOST_OS
operating system macros
See also How to get platform ids from boost
private Object lock = new Object();
private volatile boolean isOdd = false;
public void generateEvenNumbers(int number) throws InterruptedException {
synchronized (lock) {
while (isOdd == false)
{
lock.wait();
}
System.out.println(number);
isOdd = false;
lock.notifyAll();
}
}
public void generateOddNumbers(int number) throws InterruptedException {
synchronized (lock) {
while (isOdd == true) {
lock.wait();
}
System.out.println(number);
isOdd = true;
lock.notifyAll();
}
}
According to the documentation AnimationSet
Represents a group of Animations that should be played together. The transformation of each individual animation are composed together into a single transform. If AnimationSet sets any properties that its children also set (for example, duration or fillBefore), the values of AnimationSet override the child values
AnimationSet mAnimationSet = new AnimationSet(false); //false means don't share interpolators
Pass true if all of the animations in this set should use the interpolator associated with this AnimationSet. Pass false if each animation should use its own interpolator.
ImageView imageView= (ImageView)findViewById(R.id.imageView);
Animation fadeInAnimation = AnimationUtils.loadAnimation(this, R.anim.fade_in);
Animation fadeOutAnimation = AnimationUtils.loadAnimation(this, R.anim.fade_out);
mAnimationSet.addAnimation(fadeInAnimation);
mAnimationSet.addAnimation(fadeOutAnimation);
imageView.startAnimation(mAnimationSet);
I hope this will help you.
You can use The Oracle Enterprise Manager to monitor the active sessions, with the query that is being executed, its execution plan, locks, some statistics and even a progress bar for the longer tasks.
See: http://download.oracle.com/docs/cd/B10501_01/em.920/a96674/db_admin.htm#1013955
Go to Instance -> sessions and watch the SQL Tab of each session.
There are other ways. Enterprise manager just puts with pretty colors what is already available in specials views like those documented here: http://www.oracle.com/pls/db92/db92.catalog_views?remark=homepage
And, of course you can also use Explain PLAN FOR, TRACE tool and tons of other ways of instrumentalization. There are some reports in the enterprise manager for the top most expensive SQL Queries. You can also search recent queries kept on the cache.
Make sure, that all of your class methods (updateVelocity
, updatePosition
, ...) take at least one positional argument, which is canonically named self
and refers to the current instance of the class.
When you call particle.updateVelocity()
, the called method implicitly gets an argument: the instance, here particle
as first parameter.
How about:
String.prototype.strcmp = function(s) {
if (this < s) return -1;
if (this > s) return 1;
return 0;
}
Then, to compare s1 with 2:
s1.strcmp(s2)
This is from my attempt on a coding challenge that can't use regex,
outputList = "".join((c if c.isalnum() or c=="'" else ' ') for c in inputStr ).split(' ')
The role of apostrophe seems interesting.
Follow below if you use godaddy shared hosting.. its very simple: we need to access root folder of the server via ftp, create a "php5.ini" named file under public_html folder... and then add 3 stupid lines... also "php5" because I'm using php5.4 for 1 of my client. you can check your version via control panel and search php version. Adding a new file with php5.ini will not hamper anything on server end, but it will only overwrite whatever we are commanding it to do.
steps are simple: go to file manager.. click on public_html.. a new window will appear.. Click on "+"sign and create a new file in the name: "php5.ini" ... click ok/save. Now right click on that newly created php5.ini file and click on edit... a new window will appear... copy paste these below lines & click on save and close the window.
memory_limit = 128M
upload_max_filesize = 60M
max_input_vars = 5000
Unless you're trying to upload the file using ajax, just submit the form to /upload/image
.
<form enctype="multipart/form-data" action="/upload/image" method="post">
<input id="image-file" type="file" />
</form>
If you do want to upload the image in the background (e.g. without submitting the whole form), you can use ajax:
JsonMappingException: out of START_ARRAY token
exception is thrown by Jackson object mapper as it's expecting an Object {}
whereas it found an Array [{}]
in response.
This can be solved by replacing Object
with Object[]
in the argument for geForObject("url",Object[].class)
.
References:
Here's the solution I found:
let levelBlocks = NSDictionary(contentsOfFile: NSBundle.mainBundle().pathForResource("LevelBlocks", ofType: "plist"))
let test: AnyObject = levelBlocks.objectForKey("Level1")
println(test) // Prints the value of test
I set the type of test
to AnyObject
to silence a warning about an unexpected inference that could occur.
Also, it has to be done in a class method.
To access and save a specific value of a known type:
let value = levelBlocks.objectForKey("Level1").objectForKey("amount") as Int
println(toString(value)) // Converts value to String and prints it
Refer to example at this link. It may be help to you.
http://msdn.microsoft.com/en-us/library/system.web.ui.webcontrols.dropdownlist.aspx
void Page_Load(Object sender, EventArgs e)
{
// Load data for the DropDownList control only once, when the
// page is first loaded.
if(!IsPostBack)
{
// Specify the data source and field names for the Text
// and Value properties of the items (ListItem objects)
// in the DropDownList control.
ColorList.DataSource = CreateDataSource();
ColorList.DataTextField = "ColorTextField";
ColorList.DataValueField = "ColorValueField";
// Bind the data to the control.
ColorList.DataBind();
// Set the default selected item, if desired.
ColorList.SelectedIndex = 0;
}
}
void Selection_Change(Object sender, EventArgs e)
{
// Set the background color for days in the Calendar control
// based on the value selected by the user from the
// DropDownList control.
Calendar1.DayStyle.BackColor =
System.Drawing.Color.FromName(ColorList.SelectedItem.Value);
}
Just to clarify, there is a big difference between these two actions, as suggested by Jean-François Corbett.
One action is to copy / load the actual data FROM the Range("A2:A9")
INTO a Variant Array called vArray
(Changed to avoid confusion between Variant Array and Sheet both called Src):
vArray = Sheets("Src").Range("A2:A9").Value
while the other simply sets up a Range variable (SrcRange) with the ADDRESS of the range Sheets("Src").Range("A2:A9")
:
Set SrcRange = Sheets("Src").Range("A2:A9")
In this case, the data is not copied, and remains where it is, but can now be accessed in much the same way as an Array. That is often perfectly adequate, but if you need to repeatedly access, test or calculate with that data, loading it into an Array first will be MUCH faster.
For example, say you want to check a "database" (large sheet) against a list of known Suburbs and Postcodes. Both sets of data are in separate sheets, but if you want it to run fast, load the suburbs and postcodes into an Array (lives in memory), then run through each line of the main database, testing against the array data. This will be much faster than if you access both from their original sheets.
HTML tags vs. elements vs. attributes
HTML elements
An element in HTML represents some kind of structure or semantics and generally consists of a start tag, content, and an end tag. The following is a paragraph element:
<p> This is the content of the paragraph element. </p>
HTML tags
Tags are used to mark up the start and end of an HTML element.
<p></p>
HTML attributes
An attribute defines a property for an element, consists of an attribute/value pair, and appears within the element’s start tag. An element’s start tag may contain any number of space separated attribute/value pairs.
The most popular misuse of the term “tag” is referring to alt attributes as “alt tags”. There is no such thing in HTML. Alt is an attribute, not a tag.
<img src="foobar.gif" alt="A foo can be balanced on a bar by placing its fubar on the bar's foobar.">
Source: 456bereastreet.com: HTML tags vs. elements vs. attributes
If you are using the batch conversion, in the window click "options" in the "Batch conversion settings-output format" and tick the two boxes "save transparent color" (one under "PNG" and the other under "ICO").
Here is some Delphi code to check whether your program is running on a 64 bit operating system:
function Is64BitOS: Boolean;
{$IFNDEF WIN64}
type
TIsWow64Process = function(Handle:THandle; var IsWow64 : BOOL) : BOOL; stdcall;
var
hKernel32 : Integer;
IsWow64Process : TIsWow64Process;
IsWow64 : BOOL;
{$ENDIF}
begin
{$IFDEF WIN64}
//We're a 64-bit application; obviously we're running on 64-bit Windows.
Result := True;
{$ELSE}
// We can check if the operating system is 64-bit by checking whether
// we are running under Wow64 (we are 32-bit code). We must check if this
// function is implemented before we call it, because some older 32-bit
// versions of kernel32.dll (eg. Windows 2000) don't know about it.
// See "IsWow64Process", http://msdn.microsoft.com/en-us/library/ms684139.aspx
Result := False;
hKernel32 := LoadLibrary('kernel32.dll');
if hKernel32 = 0 then RaiseLastOSError;
try
@IsWow64Process := GetProcAddress(hkernel32, 'IsWow64Process');
if Assigned(IsWow64Process) then begin
if (IsWow64Process(GetCurrentProcess, IsWow64)) then begin
Result := IsWow64;
end
else RaiseLastOSError;
end;
finally
FreeLibrary(hKernel32);
end;
{$ENDIf}
end;
If you have a form action and an input type="submit"
inside form tags, it's going to submit the old fashioned way and basically refresh the page. When doing AJAX type transactions this isn't the desired effect you are after.
Remove the action. Or remove the form altogether, though in cases it does come in handy to serialize to cut your workload. If the form tags remain, move the button outside the form tags, or alternatively make it a link with an onclick or click handler as opposed to an input button. Jquery UI Buttons works great in this case because you can mimic an input button with an a tag element.
There is a lot of confusion and misinformation regarding the while;pop/shift performance both in answers and comments. The while/pop solution has (as expected) the worst performance. What's actually happening is that setup runs only once for each sample that runs the snippet in a loop. eg:
var arr = [];
for (var i = 0; i < 100; i++) {
arr.push(Math.random());
}
for (var j = 0; j < 1000; j++) {
while (arr.length > 0) {
arr.pop(); // this executes 100 times, not 100000
}
}
I have created a new test that works correctly :
http://jsperf.com/empty-javascript-array-redux
Warning: even in this version of the test you can't actually see the real difference because cloning the array takes up most of the test time. It still shows that splice
is the fastest way to clear the array (not taking []
into consideration because while it is the fastest it's not actually clearing the existing array).
What exists under PremGen : Class Area comes under PremGen area. Static fields are also developed at class loading time, so they also exist in PremGen. Constant Pool area having all immutable fields that are pooled like String are kept here. In addition to that, class data loaded by class loaders, Object arrays, internal objects used by jvm are also located.
I had the same issue, testing a bunch of different examples, and tried all the possible solutions. What finally got it working for me was when I added a @Path("")
over the class line, I had left that out.
You guys are doing way too much for selecting. Just select by value:
$("#mySelect").val( 3 );
notify()
needs to be synchronized as well
With no parameters, the .hide() method is the simplest way to hide an element:
$('.target').hide(); The matched elements will be hidden immediately, with no animation. This is roughly equivalent to calling .css('display', 'none'), except that the value of the display property is saved in jQuery's data cache so that display can later be restored to its initial value. If an element has a display value of inline, then is hidden and shown, it will once again be displayed inline.
Same about show
Check if you not imported android.R accidentally.
While Tats_innit's answer has a nice touch to it, I had to do it a bit differently since I have more than one progress bar on the page.
here's my solution:
JSfiddle: http://jsfiddle.net/vacNJ/
HTML (example):
<div class="progress progress-success">
<div class="bar" style="float: left; width: 0%; " data-percentage="60"></div>
</div>
<div class="progress progress-success">
<div class="bar" style="float: left; width: 0%; " data-percentage="50"></div>
</div>
<div class="progress progress-success">
<div class="bar" style="float: left; width: 0%; " data-percentage="40"></div>
</div>
?
JavaScript:
setTimeout(function(){
$('.progress .bar').each(function() {
var me = $(this);
var perc = me.attr("data-percentage");
var current_perc = 0;
var progress = setInterval(function() {
if (current_perc>=perc) {
clearInterval(progress);
} else {
current_perc +=1;
me.css('width', (current_perc)+'%');
}
me.text((current_perc)+'%');
}, 50);
});
},300);
@Tats_innit: Using setInterval() to dynamically recalc the progress is a nice solution, thx mate! ;)
EDIT:
A friend of mine wrote a nice jquery plugin for custom twitter bootstrap progress bars. Here's a demo: http://minddust.github.com/bootstrap-progressbar/
Here's the Github repo: https://github.com/minddust/bootstrap-progressbar
For those of you who don't have a subclass of UITableViewCell
:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
[...]
CGSize itemSize = CGSizeMake(40, 40);
UIGraphicsBeginImageContextWithOptions(itemSize, NO, UIScreen.mainScreen.scale);
CGRect imageRect = CGRectMake(0.0, 0.0, itemSize.width, itemSize.height);
[cell.imageView.image drawInRect:imageRect];
cell.imageView.image = UIGraphicsGetImageFromCurrentImageContext();
UIGraphicsEndImageContext();
[...]
return cell;
}
The code above sets the size to be 40x40.
Swift 2
let itemSize = CGSizeMake(25, 25);
UIGraphicsBeginImageContextWithOptions(itemSize, false, UIScreen.mainScreen().scale);
let imageRect = CGRectMake(0.0, 0.0, itemSize.width, itemSize.height);
cell.imageView?.image!.drawInRect(imageRect)
cell.imageView?.image! = UIGraphicsGetImageFromCurrentImageContext();
UIGraphicsEndImageContext();
Or you can use another(not tested) approach suggested by @Tommy:
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
[...]
CGSize itemSize = CGSizeMake(40, 40);
UIGraphicsBeginImageContextWithOptions(itemSize, NO, 0.0)
[...]
return cell;
}
Swift 3+
let itemSize = CGSize.init(width: 25, height: 25)
UIGraphicsBeginImageContextWithOptions(itemSize, false, UIScreen.main.scale);
let imageRect = CGRect.init(origin: CGPoint.zero, size: itemSize)
cell?.imageView?.image!.draw(in: imageRect)
cell?.imageView?.image! = UIGraphicsGetImageFromCurrentImageContext()!;
UIGraphicsEndImageContext();
The code above is the Swift 3+ version of the above.
The tabularx
package gives you
X
, all X
columns will grow to fill up the total width.For your example:
\usepackage{tabularx}
% ...
\begin{document}
% ...
\begin{tabularx}{\textwidth}{|X|X|X|}
\hline
Input & Output& Action return \\
\hline
\hline
DNF & simulation & jsp\\
\hline
\end{tabularx}
Only for this situation -
Not checking if a variable is null before invoking an equals method (a string compare example below):
if ( foo.equals("bar") ) {
// ...
}
will result in a NullPointerException
if foo
doesn't exist.
You can avoid that if you compare your String
s like this:
if ( "bar".equals(foo) ) {
// ...
}
If you can't find the password based on other answers that point to a default one, the log message wording in recent versions changed to
Using generated security password: <some UUID>
I also recommend using Joda as mentioned before.
Solving your problem using standard Java Date
objects only can be done as follows:
// **** YOUR CODE **** BEGIN ****
long ts = System.currentTimeMillis();
Date localTime = new Date(ts);
String format = "yyyy/MM/dd HH:mm:ss";
SimpleDateFormat sdf = new SimpleDateFormat(format);
// Convert Local Time to UTC (Works Fine)
sdf.setTimeZone(TimeZone.getTimeZone("UTC"));
Date gmtTime = new Date(sdf.format(localTime));
System.out.println("Local:" + localTime.toString() + "," + localTime.getTime() + " --> UTC time:"
+ gmtTime.toString() + "," + gmtTime.getTime());
// **** YOUR CODE **** END ****
// Convert UTC to Local Time
Date fromGmt = new Date(gmtTime.getTime() + TimeZone.getDefault().getOffset(localTime.getTime()));
System.out.println("UTC time:" + gmtTime.toString() + "," + gmtTime.getTime() + " --> Local:"
+ fromGmt.toString() + "-" + fromGmt.getTime());
Output:
Local:Tue Oct 15 12:19:40 CEST 2013,1381832380522 --> UTC time:Tue Oct 15 10:19:40 CEST 2013,1381825180000
UTC time:Tue Oct 15 10:19:40 CEST 2013,1381825180000 --> Local:Tue Oct 15 12:19:40 CEST 2013-1381832380000
About alexK7 benchmarks. I tried them and got similar results, but when the range of values is 1 million the cases using std::sort (f1) and using std::unordered_set (f5) produce similar time. When the range of values is 10 million f1 is faster than f5.
If the range of values is limited and the values are unsigned int, it is possible to use std::vector, the size of which corresponds to the given range. Here is the code:
void DeleteDuplicates_vector_bool(std::vector<unsigned>& v, unsigned range_size)
{
std::vector<bool> v1(range_size);
for (auto& x: v)
{
v1[x] = true;
}
v.clear();
unsigned count = 0;
for (auto& x: v1)
{
if (x)
{
v.push_back(count);
}
++count;
}
}
There is no "standard" library function to do this. The standard (perhaps surprisingly) does not actually recognise the concept of a "keyboard", albeit it does have a standard for "console input".
There are various ways to achieve it on different operating systems (see herohuyongtao's solution) but it is not portable across all platforms that support keyboard input.
Remember that C++ (and C) are devised to be languages that can run on embedded systems that do not have keyboards. (Having said that, an embedded system might not have various other devices that the standard library supports).
This matter has been debated for a long time.
With PowerShell, go to the path where your files are and then type this command and replace ENTER THE STRING YOU SEARCH HERE
(but keep the double quotes):
findstr /S /I /M /C:"ENTER THE STRING YOU SEARCH HERE" *.*
Have a nice day
You need to know at least basics of Objective-C to develop for iPhone. However, it is possible to use C++ classes.
As far as I know Adobe is working on building Flex/Flash applications for iPhone. Read more here: http://theflashblog.com/?p=1513
When you try to access it as $result['context']
, you treating it as an array, the error it's telling you that you are actually dealing with an object, then you should access it as $result->context
Return an Array Of Objects
private static Object[] f ()
{
double x =1.0;
int y= 2 ;
return new Object[]{Double.valueOf(x),Integer.valueOf(y)};
}
string_list = ['A', 'B', 'C', 'B', 'D', 'B']
pos_list = []
for i in range(len(string_list)):
if string_list[i] = ='B':
pos_list.append(i)
print pos_list
If you want to exclude numbers that are contained within words, such as bar1 or aa1bb, then add word boundaries \b to any of the regex based answers. For example:
Pattern p = Pattern.compile("\\b-?\\d+\\b");
Matcher m = p.matcher("9There 9are more9 th9an -2 and less than 12 numbers here9");
while (m.find()) {
System.out.println(m.group());
}
displays:
2
12
You could look for the presence of a map key or see if it's in a set.
Depending on what you're actually doing, though, you might be trying to solve the problem wrong :)
Rails doesnt like the using of ^ and $ for some security reasons , probably its better to use \A and \z to set the beginning and the end of the string
IMO, you should call it. If your superclass is object
, you should not, but in other cases I think it is exceptional not to call it. As already answered by others, it is very convenient if your class doesn't even have to override __init__
itself, for example when it has no (additional) internal state to initialize.
min/max_element return the iterator to the min/max element, not the value of the min/max element. You have to dereference the iterator in order to get the value out and assign it to a double. That is:
cLower = *min_element(C.begin(), C.end());
If you have a List of type string that you want in a drop down list I do the following:
EDIT: Clarified, making it a fuller example.
public class ShipDirectory
{
public string ShipDirectoryName { get; set; }
public List<string> ShipNames { get; set; }
}
ShipDirectory myShipDirectory = new ShipDirectory()
{
ShipDirectoryName = "Incomming Vessels",
ShipNames = new List<string>(){"A", "A B"},
}
myShipDirectory.ShipNames.Add("Aunt Bessy");
@Html.DropDownListFor(x => x.ShipNames, new SelectList(Model.ShipNames), "Select a Ship...", new { @style = "width:500px" })
Which gives a drop down list like so:
<select id="ShipNames" name="ShipNames" style="width:500px">
<option value="">Select a Ship...</option>
<option>A</option>
<option>A B</option>
<option>Aunt Bessy</option>
</select>
To get the value on a controllers post; if you are using a model (e.g. MyViewModel) that has the List of strings as a property, because you have specified x => x.ShipNames you simply have the method signature as (because it will be serialised/deserialsed within the model):
public ActionResult MyActionName(MyViewModel model)
Access the ShipNames value like so: model.ShipNames
If you just want to access the drop down list on post then the signature becomes:
public ActionResult MyActionName(string ShipNames)
EDIT: In accordance with comments have clarified how to access the ShipNames property in the model collection parameter.
Clearly the parent directory is given by simply appending the dot-dot filename:
/home/smith/Desktop/Test/.. # unresolved path
But you must want the resolved path (an absolute path without any dot-dot path components):
/home/smith/Desktop # resolved path
The problem with the top answers that use dirname
, is that they don't work when you enter a path with dot-dots:
$ dir=~/Library/../Desktop/../..
$ parentdir="$(dirname "$dir")"
$ echo $parentdir
/Users/username/Library/../Desktop/.. # not fully resolved
This is more powerful:
dir=/home/smith/Desktop/Test
parentdir=$(builtin cd $dir; pwd)
You can feed it /home/smith/Desktop/Test/..
, but also more complex paths like:
$ dir=~/Library/../Desktop/../..
$ parentdir=$(builtin cd $dir; pwd)
$ echo $parentdir
/Users # the fully resolved path!
NOTE: use of builtin
ensures no user defined function variant of cd
is called, but rather the default utility form which has no output.
WAR file is just a JAR file, to extract it, just issue following jar command –
jar -xvf yourWARfileName.war
If the jar command is not found, which sometimes happens in the Windows command prompt, then specify full path i.e. in my case it is,
c:\java\jdk-1.7.0\bin\jar -xvf my-file.war
The mktemp(1)
man page explains it fairly well:
Traditionally, many shell scripts take the name of the program with the pid as a suffix and use that as a temporary file name. This kind of naming scheme is predictable and the race condition it creates is easy for an attacker to win. A safer, though still inferior, approach is to make a temporary directory using the same naming scheme. While this does allow one to guarantee that a temporary file will not be subverted, it still allows a simple denial of service attack. For these reasons it is suggested that mktemp be used instead.
In a script, I invoke mktemp something like
mydir=$(mktemp -d "${TMPDIR:-/tmp/}$(basename $0).XXXXXXXXXXXX")
which creates a temporary directory I can work in, and in which I can safely name the actual files something readable and useful.
mktemp
is not standard, but it does exist on many platforms. The "X"s will generally get converted into some randomness, and more will probably be more random; however, some systems (busybox ash, for one) limit this randomness more significantly than others
By the way, safe creation of temporary files is important for more than just shell scripting. That's why python has tempfile, perl has File::Temp, ruby has Tempfile, etc…
Last segment of URL will always be the action. Please get like this:
$this->uri->segment('last_segment');
I modified my activate script to source the file .virtualenvrc
, if it exists in the current directory, and to save/restore PYTHONPATH
on activate/deactivate.
You can find the patched activate
script here.. It's a drop-in replacement for the activate script created by virtualenv 1.11.6.
Then I added something like this to my .virtualenvrc
:
export PYTHONPATH="${PYTHONPATH:+$PYTHONPATH:}/some/library/path"
It has nothing to do with append
. tuple(3, 4)
all by itself raises that error.
The reason is that, as the error message says, tuple
expects an iterable argument. You can make a tuple of the contents of a single object by passing that single object to tuple. You can't make a tuple of two things by passing them as separate arguments.
Just do (3, 4)
to make a tuple, as in your first example. There's no reason not to use that simple syntax for writing a tuple.
Use PHPMailer instead: https://github.com/PHPMailer/PHPMailer
How to use it:
require('./PHPMailer/class.phpmailer.php');
$mail=new PHPMailer();
$mail->CharSet = 'UTF-8';
$body = 'This is the message';
$mail->IsSMTP();
$mail->Host = 'smtp.gmail.com';
$mail->SMTPSecure = 'tls';
$mail->Port = 587;
$mail->SMTPDebug = 1;
$mail->SMTPAuth = true;
$mail->Username = '[email protected]';
$mail->Password = '123!@#';
$mail->SetFrom('[email protected]', $name);
$mail->AddReplyTo('[email protected]','no-reply');
$mail->Subject = 'subject';
$mail->MsgHTML($body);
$mail->AddAddress('[email protected]', 'title1');
$mail->AddAddress('[email protected]', 'title2'); /* ... */
$mail->AddAttachment($fileName);
$mail->send();
you can always create new admin template , and do what you need in your admin_view (override the admin add url to your admin_view):
url(r'^admin/mymodel/mymodel/add/$' , 'admin_views.add_my_special_model')
Late to the party, but this may help anyone looking for a quick solution:
you can use bin(ord('b')).replace('b', '')
bin() it gives you the binary representation with a 'b' after the last bit, you have to remove it. Also ord() gives you the ASCII number to the char or 8-bit/1 Byte coded character.
Cheers
List<string> accountList = new List<string> {"123872", "987653" , "7625019", "028401"};
int i = accountList.FindIndex(x => x.StartsWith("762"));
//This will give you index of 7625019 in list that is 2. value of i will become 2.
//delegate(string ac)
//{
// return ac.StartsWith(a.AccountNumber);
//}
//);
$.each()
works for objects and arrays both:
var data = { "programs": [ { "name":"zonealarm", "price":"500" }, { "name":"kaspersky", "price":"200" } ] };
$.each(data.programs, function (i) {
$.each(data.programs[i], function (key, val) {
alert(key + val);
});
});
...and since you will get the current array element as second argument:
$.each(data.programs, function (i, currProgram) {
$.each(currProgram, function (key, val) {
alert(key + val);
});
});
In EF Core 5.0, you will be able to define it at entity level also.
[Keyless]
public class Address
{
public string Street { get; set; }
public string City { get; set; }
public int Zip { get; set; }
}
As of .net3.5+ instead of using a Dictionary<IKey, List<IValue>>
you can use a Lookup
from the Linq namespace:
// lookup Order by payment status (1:m)
// would need something like Dictionary<Boolean, IEnumerable<Order>> orderIdByIsPayed
ILookup<Boolean, Order> byPayment = orderList.ToLookup(o => o.IsPayed);
IEnumerable<Order> payedOrders = byPayment[false];
From msdn:
A Lookup resembles a Dictionary. The difference is that a Dictionary maps keys to single values, whereas a Lookup maps keys to collections of values.
You can create an instance of a Lookup by calling ToLookup on an object that implements IEnumerable.
You may also want to read this answer to a related question. For more info, consult msdn.
Full example:
using System;
using System.Collections.Generic;
using System.Linq;
namespace LinqLookupSpike
{
class Program
{
static void Main(String[] args)
{
// init
var orderList = new List<Order>();
orderList.Add(new Order(1, 1, 2010, true));//(orderId, customerId, year, isPayed)
orderList.Add(new Order(2, 2, 2010, true));
orderList.Add(new Order(3, 1, 2010, true));
orderList.Add(new Order(4, 2, 2011, true));
orderList.Add(new Order(5, 2, 2011, false));
orderList.Add(new Order(6, 1, 2011, true));
orderList.Add(new Order(7, 3, 2012, false));
// lookup Order by its id (1:1, so usual dictionary is ok)
Dictionary<Int32, Order> orders = orderList.ToDictionary(o => o.OrderId, o => o);
// lookup Order by customer (1:n)
// would need something like Dictionary<Int32, IEnumerable<Order>> orderIdByCustomer
ILookup<Int32, Order> byCustomerId = orderList.ToLookup(o => o.CustomerId);
foreach (var customerOrders in byCustomerId)
{
Console.WriteLine("Customer {0} ordered:", customerOrders.Key);
foreach (var order in customerOrders)
{
Console.WriteLine(" Order {0} is payed: {1}", order.OrderId, order.IsPayed);
}
}
// the same using old fashioned Dictionary
Dictionary<Int32, List<Order>> orderIdByCustomer;
orderIdByCustomer = byCustomerId.ToDictionary(g => g.Key, g => g.ToList());
foreach (var customerOrders in orderIdByCustomer)
{
Console.WriteLine("Customer {0} ordered:", customerOrders.Key);
foreach (var order in customerOrders.Value)
{
Console.WriteLine(" Order {0} is payed: {1}", order.OrderId, order.IsPayed);
}
}
// lookup Order by payment status (1:m)
// would need something like Dictionary<Boolean, IEnumerable<Order>> orderIdByIsPayed
ILookup<Boolean, Order> byPayment = orderList.ToLookup(o => o.IsPayed);
IEnumerable<Order> payedOrders = byPayment[false];
foreach (var payedOrder in payedOrders)
{
Console.WriteLine("Order {0} from Customer {1} is not payed.", payedOrder.OrderId, payedOrder.CustomerId);
}
}
class Order
{
// key properties
public Int32 OrderId { get; private set; }
public Int32 CustomerId { get; private set; }
public Int32 Year { get; private set; }
public Boolean IsPayed { get; private set; }
// additional properties
// private List<OrderItem> _items;
public Order(Int32 orderId, Int32 customerId, Int32 year, Boolean isPayed)
{
OrderId = orderId;
CustomerId = customerId;
Year = year;
IsPayed = isPayed;
}
}
}
}
Remark on Immutability
By default, Lookups are kind of immutable and accessing the internal
s would involve reflection.
If you need mutability and don't want to write your own wrapper, you could use MultiValueDictionary
(formerly known as MultiDictionary
)
from corefxlab (formerly part ofMicrosoft.Experimental.Collections
which isn't updated anymore).
You can use the Ext.util.Format.ellipsis function if you are using Ext.js.
If you use RequestDispatcher.forward()
to route the request from controller to the view, then request URI is exposed as a request attribute named javax.servlet.forward.request_uri
. So, you can use
request.getAttribute("javax.servlet.forward.request_uri")
or
${requestScope['javax.servlet.forward.request_uri']}
I may be late to this one, but would help with the answer:
echo "COL_NAME1|COL_NAME2|COL_NAME3|COL_NAME4" > SAMPLE_Data.csv hive -e ' select distinct concat(COL_1, "|", COL_2, "|", COL_3, "|", COL_4) from table_Name where clause if required;' >> SAMPLE_Data.csv
If I understand you correctly, you want to compose a multipart request manually from an HTTP/REST console. The multipart format is simple; a brief introduction can be found in the HTML 4.01 spec. You need to come up with a boundary, which is a string not found in the content, let’s say HereGoes
. You set request header Content-Type: multipart/form-data; boundary=HereGoes
. Then this should be a valid request body:
--HereGoes
Content-Disposition: form-data; name="myJsonString"
Content-Type: application/json
{"foo": "bar"}
--HereGoes
Content-Disposition: form-data; name="photo"
Content-Type: image/jpeg
Content-Transfer-Encoding: base64
<...JPEG content in base64...>
--HereGoes--
Sometimes you want to have your GridView as simple as:
<asp:GridView ID="grid" runat="server" />
You don't want to specify any BoundField, you just want to bind your grid to DataReader. The following code helped me to format DateTime in this situation.
protected void Page_Load(object sender, EventArgs e)
{
grid.RowDataBound += grid_RowDataBound;
// Your DB access code here...
// grid.DataSource = cmd.ExecuteReader(CommandBehavior.CloseConnection);
// grid.DataBind();
}
void grid_RowDataBound(object sender, GridViewRowEventArgs e)
{
if (e.Row.RowType != DataControlRowType.DataRow)
return;
var dt = (e.Row.DataItem as DbDataRecord).GetDateTime(4);
e.Row.Cells[4].Text = dt.ToString("dd.MM.yyyy");
}
The results shown here.
SELECT CAST (col1 as float) / col2 FROM tbl1
One cast should work. ("Less is more.")
From Books Online:
Returns the data type of the argument with the higher precedence. For more information about data type precedence, see Data Type Precedence (Transact-SQL).
If an integer dividend is divided by an integer divisor, the result is an integer that has any fractional part of the result truncated
See https://docs.djangoproject.com/en/stable/ref/templates/builtins/#if : just use, to reproduce their example:
{% if athlete_list %}
Number of athletes: {{ athlete_list|length }}
{% else %}
No athletes.
{% endif %}
Here is the script I use:
@ECHO off
SETLOCAL ENABLEDELAYEDEXPANSION
mode con:cols=210 lines=50
ECHO Starting 1-way backup of MEDIA(M:) to BACKUP(G:)...
robocopy.exe M:\ G:\ *.* /E /PURGE /SEC /NP /NJH /NJS /XD "$RECYCLE.BIN" "System Volume Information" /TEE /R:5 /COPYALL /LOG:from_M_to_G.log
ECHO Finished with backup.
pause
Upcasting (using (Employee)someInstance
) is generally easy as the compiler can tell you at compile time if a type is derived from another.
Downcasting however has to be done at run time generally as the compiler may not always know whether the instance in question is of the type given. C# provides two operators for this - is which tells you if the downcast works, and return true/false. And as which attempts to do the cast and returns the correct type if possible, or null if not.
To test if an employee is a manager:
Employee m = new Manager();
Employee e = new Employee();
if(m is Manager) Console.WriteLine("m is a manager");
if(e is Manager) Console.WriteLine("e is a manager");
You can also use this
Employee someEmployee = e as Manager;
if(someEmployee != null) Console.WriteLine("someEmployee (e) is a manager");
Employee someEmployee = m as Manager;
if(someEmployee != null) Console.WriteLine("someEmployee (m) is a manager");
This code is working for blur effect for all browsers.
filter: blur(10px);
-webkit-filter: blur(10px);
-moz-filter: blur(10px);
-o-filter: blur(10px);
-ms-filter: blur(10px);
In a nutshell, "fork" creates a copy of the project hosted on your own GitHub account.
"Clone" uses git software on your computer to download the source code and it's entire version history unto that computer
From Java 1.5 it's always a good Idea to consider java.util.concurrent package. They are the state of the art locking mechanism in java right now. The synchronize mechanism is more heavyweight that the java.util.concurrent classes.
The example would look something like this:
import java.util.concurrent.locks.Lock;
import java.util.concurrent.locks.ReentrantLock;
public class Sample {
private final Lock lock = new ReentrantLock();
private String message = null;
public void newmsg(String msg) {
lock.lock();
try {
message = msg;
} finally {
lock.unlock();
}
}
public String getmsg() {
lock.lock();
try {
String temp = message;
message = null;
return temp;
} finally {
lock.unlock();
}
}
}
I am 10 yrs late to the party but would like to attempt any way. Wrote a post about the same on medium few days back. Thought of posting it here.
tl;dr; When you see “Is A” relationship use inheritance/abstract class. when you see “has a” relationship create member variables. When you see “relies on external provider” implement (not inherit) an interface.
Interview Question: What is the difference between an interface and an abstract class? And how do you decide when to use what? I mostly get one or all of the below answers: Answer 1: You cannot create an object of abstract class and interfaces.
ZK (That’s my initials): You cannot create an object of either. So this is not a difference. This is a similarity between an interface and an abstract class. Counter Question: Why can’t you create an object of abstract class or interface?
Answer 2: Abstract classes can have a function body as partial/default implementation.
ZK: Counter Question: So if I change it to a pure abstract class, marking all the virtual functions as abstract and provide no default implementation for any virtual function. Would that make abstract classes and interfaces the same? And could they be used interchangeably after that?
Answer 3: Interfaces allow multi-inheritance and abstract classes don’t.
ZK: Counter Question: Do you really inherit from an interface? or do you just implement an interface and, inherit from an abstract class? What’s the difference between implementing and inheriting? These counter questions throw candidates off and make most scratch their heads or just pass to the next question. That makes me think people need help with these basic building blocks of Object-Oriented Programming. The answer to the original question and all the counter questions is found in the English language and the UML. You must know at least below to understand these two constructs better.
Common Noun: A common noun is a name given “in common” to things of the same class or kind. For e.g. fruits, animals, city, car etc.
Proper Noun: A proper noun is the name of an object, place or thing. Apple, Cat, New York, Honda Accord etc.
Car is a Common Noun. And Honda Accord is a Proper Noun, and probably a Composit Proper noun, a proper noun made using two nouns.
Coming to the UML Part. You should be familiar with below relationships:
Let’s consider the below two sentences. - HondaAccord Is A Car? - HondaAccord Has A Car?
Which one sounds correct? Plain English and comprehension. HondaAccord and Cars share an “Is A” relationship. Honda accord doesn’t have a car in it. It “is a” car. Honda Accord “has a” music player in it.
When two entities share the “Is A” relationship it’s a better candidate for inheritance. And Has a relationship is a better candidate for creating member variables. With this established our code looks like this:
abstract class Car
{
string color;
int speed;
}
class HondaAccord : Car
{
MusicPlayer musicPlayer;
}
Now Honda doesn't manufacture music players. Or at least it’s not their main business.
So they reach out to other companies and sign a contract. If you receive power here and the output signal on these two wires it’ll play just fine on these speakers.
This makes Music Player a perfect candidate for an interface. You don’t care who provides support for it as long as the connections work just fine.
You can replace the MusicPlayer of LG with Sony or the other way. And it won’t change a thing in Honda Accord.
Why can’t you create an object of abstract classes?
Because you can’t walk into a showroom and say give me a car. You’ll have to provide a proper noun. What car? Probably a honda accord. And that’s when a sales agent could get you something.
Why can’t you create an object of an interface? Because you can’t walk into a showroom and say give me a contract of music player. It won’t help. Interfaces sit between consumers and providers just to facilitate an agreement. What will you do with a copy of the agreement? It won’t play music.
Why do interfaces allow multiple inheritance?
Interfaces are not inherited. Interfaces are implemented. The interface is a candidate for interaction with the external world. Honda Accord has an interface for refueling. It has interfaces for inflating tires. And the same hose that is used to inflate a football. So the new code will look like below:
abstract class Car
{
string color;
int speed;
}
class HondaAccord : Car, IInflateAir, IRefueling
{
MusicPlayer musicPlayer;
}
And the English will read like this “Honda Accord is a Car that supports inflating tire and refueling”.
Assuming the first byte is the least significant byte:
long value = 0;
for (int i = 0; i < by.length; i++)
{
value += ((long) by[i] & 0xffL) << (8 * i);
}
Is the first byte the most significant, then it is a little bit different:
long value = 0;
for (int i = 0; i < by.length; i++)
{
value = (value << 8) + (by[i] & 0xff);
}
Replace long with BigInteger, if you have more than 8 bytes.
Thanks to Aaron Digulla for the correction of my errors.
I adapted @Bryce Kahle's answer to follow @Mathias Lykkegaard Lorenzen's suggestion and use LogicalTreeHelper
.
Seems to work okay. ;)
public static IEnumerable<T> FindLogicalChildren<T> ( DependencyObject depObj ) where T : DependencyObject
{
if( depObj != null )
{
foreach( object rawChild in LogicalTreeHelper.GetChildren( depObj ) )
{
if( rawChild is DependencyObject )
{
DependencyObject child = (DependencyObject)rawChild;
if( child is T )
{
yield return (T)child;
}
foreach( T childOfChild in FindLogicalChildren<T>( child ) )
{
yield return childOfChild;
}
}
}
}
}
(It still won't check tab controls or Grids inside GroupBoxes as mentioned by @Benjamin Berry & @David R respectively.) (Also followed @noonand's suggestion & removed the redundant child != null)
I could solve the issue with the following steps
3. Set the proxy in settings.xml in Maven installation
(C:\path\apache-maven-3.6.0\conf)
<proxy>
<id>optional</id>
<active>true</active>
<protocol>http</protocol>
<username>optional-proxyuser</username>
<password>optional-proxypass</password>
<host>proxy.host.net</host>
<port>80</port>
<nonProxyHosts>local.net|some.host.com</nonProxyHosts>
</proxy>
What Tyler Rinker says is correct:
AQ2 <- airquality
AQ2[is.na(AQ2)] <- 0
will do just this.
What you are originally doing is that you are taking from airquality
all those rows (cases) that are complete. So, all the cases that do not have any NA's in them, and keep only those.
For me I was using expired auth keys. Generated new ones and boom.
Set the display property to none
as the default, then use a media query to apply the desired styles to the div when the browser reaches a certain width. Replace 768px
in the media query with whatever the minimum px value is where your div should be visible.
#title_message {
display: none;
}
@media screen and (min-width: 768px) {
#title_message {
clear: both;
display: block;
float: left;
margin: 10px auto 5px 20px;
width: 28%;
}
}
In addition to the answers above the command below will also work. I post it because it makes more sense to me. In each case it is 'using x-value-column: y-value-column'
plot 'ls.dat' using 1:2, 'ls.dat' using 1:3, 'ls.dat' using 1:4
note that the command above assumes that you have a file named ls.dat
with tab separated columns of data where column 1 is x, column 2 is y1, column 3 is y2 and column 4 is y3.
After DAYS of digging, someone on IRC suggested that I try to use the
Windows 7.1 SDK Command Prompt
Shortcut (links to C:\Windows\System32\cmd.exe /E:ON /V:ON /T:0E /K "C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd"). I think you MUST have the older 7.1 SDK (even on Windows 8.1) because the newer ones use msbuild.exe instead of vcbuild.exe which is what node-gyp wants even though it's twice as old as node at this point :/
Once in that prompt, I had to run the following to get x86 context because the compiler was throwing as error otherwise about architecture:
setenv.cmd /Release /x86
THEN I was able to successfully run npm commands that were trying to use node-gyp to recompile things.
My pycharm ce had the same error, was easy to fix it, if someone has that error, just uninstall and delete the folder, use ctrl+h
if you can't find the folder in your documents, install the software again and should work again.
Remember to save the scratches folder before erasing the pycharm folder.
Here is the official explanation: https://github.com/golang/go/wiki/InterfaceSlice
var dataSlice []int = foo()
var interfaceSlice []interface{} = make([]interface{}, len(dataSlice))
for i, d := range dataSlice {
interfaceSlice[i] = d
}
I solved my problem by running below command
Set-ExecutionPolicy -ExecutionPolicy RemoteSigned -Scope CurrentUser
The example bellow explains how to remove bullets using a css style class. You can use , similar to css class, by identifier (#id), by parent tag, etc. The same way you can use to define a css to remove bullets from the page footer.
I've used this site as a starting point.
<html>
<head>
<style type="text/css">
div.ui-menu li {
list-style:none;
background-image:none;
background-repeat:none;
background-position:0;
}
ul
{
list-style-type:none;
padding:0px;
margin:0px;
}
li
{
background-image:url(sqpurple.gif);
background-repeat:no-repeat;
background-position:0px 5px;
padding-left:14px;
}
</style>
</head>
<body>
<div class="ui-menu">
<ul>
<li>Coffee</li>
<li>Tea</li>
<li>Coca Cola</li>
</ul>
</div>
<ul>
<li>Coffee</li>
<li>Tea</li>
<li>Coca Cola</li>
</ul>
</body>
</html>
Try this:
function getYesterdaysDate() {
var date = new Date();
date.setDate(date.getDate()-1);
return date.getDate() + '/' + (date.getMonth()+1) + '/' + date.getFullYear();
}
file version < 5 : file -i -b /path/to/file
file version >=5 : file --mime-type -b /path/to/file
To compare entire revisions, it's simply:
svn diff -r 8979:11390
If you want to compare the last committed state against your currently saved working files, you can use convenience keywords:
svn diff -r PREV:HEAD
(Note, without anything specified afterwards, all files in the specified revisions are compared.)
You can compare a specific file if you add the file path afterwards:
svn diff -r 8979:HEAD /path/to/my/file.php
You might sort the helper[]
array directly:
java.util.Arrays.sort(helper, 1, helper.length);
Sorts the array from index 1 to the end. Leaves the first item at index 0 untouched.
[Required(ErrorMessage = "Please enter Social Email id")]
[DataType(DataType.EmailAddress)]
[EmailAddress]
public string Email { get; set; }
From this looks of this MSDN article, it looks like you can now bypass the MAX_PATH restriction in Windows 10 v1607 (AKA 'anniversary update') by changing a value in the registry - or via Group Policy
Using anything other than ==
to compare enum constants is nonsense. It's like comparing class
objects with equals
– don't do it!
However, there was a nasty bug (BugId 6277781) in Sun JDK 6u10 and earlier that might be interesting for historical reasons. This bug prevented proper use of ==
on deserialized enums, although this is arguably somewhat of a corner case.
Very annoying, no cookie file exmpale on the official website https://ec.haxx.se/http/http-cookies.
Finnaly, I find it does not work, if your file content is just copyied like this
foo1=bar;foo2=bar2
I gusess the format must looks the style said by @Agustí Sánchez . You can test it by -c to create a cookie file on a website.
So try this way, it works
curl -H "Cookie:`cat ./my.cookie`" http://xxxx.com
You can just copy the cookie from chrome console network tab.
This detects the scroll stop after 1 milisecond (or change it) using a global timer:
var scrollTimer;
$(window).on("scroll",function(){
clearTimeout(scrollTimer);
//Do what you want whilst scrolling
scrollTimer=setTimeout(function(){afterScroll()},1);
})
function afterScroll(){
//I catched scroll stop.
}
Class.getResources
would retrieve the resource by the classloader which load the object. While ClassLoader.getResource
would retrieve the resource using the classloader specified.
A alternative without glib dependency is pkg-config-lite.
Extract pkg-config.exe
from the archive and put it in your path.
Nowdays this package is available using chocolatey, then it could be installed whith
choco install pkgconfiglite
You can check if you got your remote setup right and have the proper permissions with
git ls-remote origin
if you called your remote "origin". If you get an error you probably don't have your security set up correctly such as uploading your public key to github for example. If things are setup correctly, you will get a list of the remote references. Now
git fetch origin
will work barring any other issues like an unplugged network cable.
Once you have that done, you can get any branch you want that the above command listed with
git checkout some-branch
this will create a local branch of the same name as the remote branch and check it out.
I think your code is trying to "divide by zero" or "divide by NaN". If you are aware of that and don't want it to bother you, then you can try:
import numpy as np
np.seterr(divide='ignore', invalid='ignore')
For more details see:
To "remove" the 1st character point to the second character:
char mystr[] = "Nmy stringP";
char *p = mystr;
p++; /* 'N' is not in `p` */
To remove the last character replace it with a '\0'
.
p[strlen(p)-1] = 0; /* 'P' is not in `p` (and it isn't in `mystr` either) */
http://php.net/manual/en/language.types.array.php
<?php
$array = array(
"foo" => "bar",
"bar" => "foo",
);
// as of PHP 5.4
$array = [
"foo" => "bar",
"bar" => "foo",
];
?>
Standard arrays can be used that way.
I had 20.8 GB in the C:\Users\ggo\AppData\Local\Android\Sdk\system-images folder (6 android images: - android-10 - android-15 - android-21 - android-23 - android-25 - android-26 ).
I have compressed the C:\Users\ggo\AppData\Local\Android\Sdk\system-images folder.
Now it takes only 4.65 GB.
I did not encountered any problem up to now...
Compression seems to vary from 2/3 to 6, sometimes much more:
I know this answer comes late, but I can see people havent found an answer. To prevent the up key to put the cursor at the start, just return false
from the method handling the event. This stops the event chain that leads to the cursor movement. Pasting revised code from the OP below:
$(document).keydown(function(e) {
var key = e.charCode ? e.charCode : e.keyCode ? e.keyCode : 0;
var input = self.shell.find('input.current:last');
switch(key) {
case 38: // up
lastQuery = self.queries[self.historyCounter-1];
self.historyCounter--;
input.val(lastQuery).focus();
// HERE IS THE FIX:
return false;
// and it continues on from there
.m2 directory on linux box usually would be $HOME/.m2
you could get the $HOME :
echo $HOME
or simply:
cd <enter>
to go to your home directory.
other information from maven site: http://maven.apache.org/download.html#Installation
The way I'm doing it now is basically like this:
The HTML:
<textarea id="myText">
Lorem ipsum...
</textarea>
<button onclick="sendMail(); return false">Send</button>
The Javascript:
function sendMail() {
var link = "mailto:[email protected]"
+ "[email protected]"
+ "&subject=" + encodeURIComponent("This is my subject")
+ "&body=" + encodeURIComponent(document.getElementById('myText').value)
;
window.location.href = link;
}
This, surprisingly, works rather well. The only problem is that if the body is particularly long (somewhere over 2000 characters), then it just opens a new email but there's no information in it. I suspect that it'd be to do with the maximum length of the URL being exceeded.
((portion/total) * 100).toFixed(2) + '%'
RHT pretty much has it. Or you could use a RowSetDynaClass and let someone else do all the work :)
You could always catch the error yourself.
begin
execute immediate 'drop table mytable';
exception when others then null;
end;
It is considered bad practice to overuse this, similar to empty catch()'es in other languages.
Regards
K
Try this It may be more appropriate for you
#container { display:block; }_x000D_
@media only screen and (orientation:portrait){_x000D_
#container { _x000D_
height: 100vw;_x000D_
-webkit-transform: rotate(90deg);_x000D_
-moz-transform: rotate(90deg);_x000D_
-o-transform: rotate(90deg);_x000D_
-ms-transform: rotate(90deg);_x000D_
transform: rotate(90deg);_x000D_
}_x000D_
}_x000D_
@media only screen and (orientation:landscape){_x000D_
#container { _x000D_
-webkit-transform: rotate(0deg);_x000D_
-moz-transform: rotate(0deg);_x000D_
-o-transform: rotate(0deg);_x000D_
-ms-transform: rotate(0deg);_x000D_
transform: rotate(0deg);_x000D_
}_x000D_
}
_x000D_
<div id="container">_x000D_
<!-- your html for your website -->_x000D_
<H1>This text is always in Landscape Mode</H1>_x000D_
</div>
_x000D_
This will automatically manage even rotation.
Throwing this in for PowerShell 2.0 and upwards:
Run New-EventLog
once to register the event source:
New-EventLog -LogName Application -Source MyApp
Then use Write-EventLog
to write to the log:
Write-EventLog
-LogName Application
-Source MyApp
-EntryType Error
-Message "Immunity to iocaine powder not detected, dying now"
-EventId 1
This error comes with Android Studio lower than 2.4 when you try to enable Java 8 features in gradle settings following the instruction. Error can be reproduced in a new project with those gradle settings.
A higher version is needed, or a preview one.
You should really post:
Here is my code, which works:
import socket, sys
def alert(msg):
print >>sys.stderr, msg
sys.exit(1)
(family, socktype, proto, garbage, address) = \
socket.getaddrinfo("::1", "http")[0] # Use only the first tuple
s = socket.socket(family, socktype, proto)
try:
s.connect(address)
except Exception, e:
alert("Something's wrong with %s. Exception type is %s" % (address, e))
When the server listens, I get nothing (this is normal), when it doesn't, I get the expected message:
Something's wrong with ('::1', 80, 0, 0). Exception type is (111, 'Connection refused')
The first check user logged in and then
if (Auth::check()){
//get id of logged in user
{{ Auth::getUser()->id}}
//get the name of logged in user
{{ Auth::getUser()->name }}
}
I've found out a nice workaround to IP blocking when scraping sites. It lets you run a Scraper indefinitely by running it from Google App Engine and redeploying it automatically when you get a 429.
Check out this article
Another option is regex:
>>> import re
>>> re.sub("\n|\r", "", "Foo\n\rbar\n\rbaz\n\r")
'Foobarbaz'
According to my interpretation of the implementation of unicode-escape
and the unicode repr
in the CPython 2.6.5 source, yes; the only difference between repr(unicode_string)
and unicode_string.encode('unicode-escape')
is the inclusion of wrapping quotes and escaping whichever quote was used.
They are both driven by the same function, unicodeescape_string
. This function takes a parameter whose sole function is to toggle the addition of the wrapping quotes and escaping of that quote.
One advantage (albeit very slight) of defining string constants is that you can concatenate them at compile time:
#define HELLO "hello"
#define WORLD "world"
puts( HELLO WORLD );
Not sure that's really an advantage, but it is a technique that cannot be used with const char *
's.
scrollBottom
is not a method in jQuery.
UPDATED DEMO - http://jsfiddle.net/xEFq5/10/
Try this:
$("#upClick").on("click" ,function(){
scrolled=scrolled-300;
$(".cover").animate({
scrollTop: scrolled
});
});
Java has static methods that are associated with classes (e.g. java.lang.Math has only static methods), but the class itself is not static.
Make sure of the conflict origin: if it is the result of a git merge
, see Brian Campbell's answer.
But if is the result of a git rebase
, in order to discard remote (their) changes and use local changes, you would have to do a:
git checkout --theirs -- .
See "Why is the meaning of “ours
” and “theirs
” reversed"" to see how ours
and theirs
are swapped during a rebase (because the upstream branch is checked out).
I have used in Google Sheets
={sheetname!columnnamefrom:columnnameto}
Example:
={sheet1!A:A}
={sheet2!A4:A20}
And if you need authorized user in templates (e.g. JSP) use
<%@ taglib prefix="sec" uri="http://www.springframework.org/security/tags" %>
<sec:authentication property="principal.yourCustomField"/>
together with
<dependency>
<groupId>org.springframework.security</groupId>
<artifactId>spring-security-taglibs</artifactId>
<version>${spring-security.version}</version>
</dependency>
Ana alternative Solution for RSolgberg, which fires the 'onchange'
event if present:
$("#target").val($("#target option:first").val());
Got it. Quite stupid, actually. It worked after I removed & added the SessionStateModule like so:
<configuration>
...
<system.webServer>
...
<modules>
<remove name="Session" />
<add name="Session" type="System.Web.SessionState.SessionStateModule"/>
...
</modules>
</system.webServer>
</configuration>
Simply adding it won't work since "Session" should have already been defined in the machine.config
.
Now, I wonder if that is the usual thing to do. It surely doesn't seem so since it seems so crude...
When you want to count the frequency of categorical data in a column in pandas dataFrame use: df['Column_Name'].value_counts()
-Source.
well, using the Macro record, and doing it manually, I ended up with this code .. which seems to work .. (although it's not a one liner like yours ;)
lrow = Selection.Row()
Rows(lrow).Select
Selection.Copy
Rows(lrow + 1).Select
Selection.Insert Shift:=xlDown
Application.CutCopyMode = False
Selection.ClearContents
(I put the ClearContents in there because you indicated you wanted format, and I'm assuming you didn't want the data ;) )
Thanks for the answers. Now I know that there are two ways of "SAVE AS" in Vim.
Assumed that I'm editing hello.txt.
Yes, it is. However, it doesn't support all of the features one would expect in an object oriented programming language lacking inheritance and polymorphism. This doesn't mean, however, that you cannot simulate these capabilities through the prototyping system that is avaialble to the language.
Make a copy of your OpenSSL config in your home directory:
cp /System/Library/OpenSSL/openssl.cnf ~/openssl-temp.cnf
or on Linux:
cp /etc/ssl/openssl.cnf ~/openssl-temp.cnf
Add Subject Alternative Name to openssl-temp.cnf
, under [v3_ca]
:
[ v3_ca ]
subjectAltName = DNS:localhost
Replace localhost
by the domain for which you want to generate that certificate.
Generate certificate:
sudo openssl req -x509 -nodes -days 365 -newkey rsa:2048 \
-config ~/openssl-temp.cnf
-keyout /path/to/your.key -out /path/to/your.crt
You can then delete openssl-temp.cnf
INSERT INTO ProductPurchaseOrderItems_bkp
(
[OrderId],
[ProductId],
[Quantity],
[Price]
)
SELECT
[OrderId],
[ProductId],
[Quantity],
[Price]
FROM ProductPurchaseOrderItems
WHERE OrderId=415
In my case, the disk ran out of space, so I had to delete files from the hard drive to make space.
because my array was like below: and I used .push function to create it dynamically
my_array = ["234", "23423"];
The only way I converted my array into json is
json = Object.assign({}, my_array);
Simply find all the selected <option>
tags within your <select>
and remove the selected
attribute:
$("#my_select option:selected").removeAttr("selected");
As of jQuery 1.6, you should use .prop
instead of removing the attribute:
$("#my_select option:selected").prop("selected", false);
It should be this way:
h2.myClass
looks for h2 with class myClass
. But you actually want to apply style for h2 inside .myClass
so you can use descendant selector .myClass h2
.
h2 {
color: red;
}
.myClass {
color: green;
}
.myClass h2 {
color: blue;
}
This ref will give you some basic idea about the selectors and have a look at descendant selectors
I have used a very simple solution. I have included a HTML element, that calls the method, in my Vue Component that I select, using Vanilla JS, and I trigger click!
In the Vue Component, I have included something like the following:
<span data-id="btnReload" @click="fetchTaskList()"><i class="fa fa-refresh"></i></span>
That I use using Vanilla JS:
const btnReload = document.querySelector('[data-id="btnReload"]');
btnReload.click();
Here is a great reference for HTML Ascii codes:
http://www.ascii.cl/htmlcodes.htm
The code you are looking for is: '
I got here because I wanted to create a range between -10 and 10 in increments of 0.1 using list comprehension. Instead of doing an overly complicated function like most of the answers above I just did this
simple_range = [ x*0.1 for x in range(-100, 100) ]
By changing the range count to 100 I now get my range of -10 through 10 by using the standard range function. So if you need it by 0.2 then just do range(-200, 200) and so on etc
You could try this.
=IF(A1=1,B1,TRIM(" "))
If you put this formula in cell C1, then you could test if this cell is blank in another cells
=ISBLANK(C1)
You should see TRUE. I've tried on Microsoft Excel 2013. Hope this helps.
Don't know (as for now) why, but this one helped:
@media print {
html, body {
border: 1px solid white;
height: 99%;
page-break-after: avoid;
page-break-before: avoid;
}
}
Hope someone will save his hair while fighting with the problem... ;)
Well, there's always the low tech solution of adding logging of the size of your maps when you modify them, then search the logs for which maps are growing beyond a reasonable size.
We have had some fun with the following, interesting to share so:
class RepeatFunction:
def __init__(self,n=1): self.n = n
def __call__(self,Func):
for i in xrange(self.n):
Func()
return Func
#----usage
k = 0
@RepeatFunction(7) #decorator for repeating function
def Job():
global k
print k
k += 1
print '---------'
Job()
Results:
0
1
2
3
4
5
6
---------
7
Only this worked for me:
#container:hover .cube { background-color: yellow; }
Where .cube
is CssClass of the #cube
.
Tested in Firefox, Chrome and Edge.
Angular CLI now uses environment files to do this.
First, add an environments
section to the angular-cli.json
Something like :
{
"apps": [{
"environments": {
"prod": "environments/environment.prod.ts"
}
}]
}
And then inside the environment file (environments/environment.prod.ts
in this case), add something like :
export const environment = {
production: true,
"output-path": "./whatever/dist/"
};
now when you run :
ng build --prod
it will output to the ./whatever/dist/
folder.
$client = new \GuzzleHttp\Client();
$request = $client->post('http://demo.website.com/api', [
'body' => json_encode($dataArray)
]);
$response = $request->getBody();
Add
openssl.cafile
in php.ini
file
Normal answer for this question if you really want to get something like content//media/external/video/media/18576
(e.g. for your video mp4 absolute path) and not just file///storage/emulated/0/DCIM/Camera/20141219_133139.mp4
:
MediaScannerConnection.scanFile(this,
new String[] { file.getAbsolutePath() }, null,
new MediaScannerConnection.OnScanCompletedListener() {
public void onScanCompleted(String path, Uri uri) {
Log.i("onScanCompleted", uri.getPath());
}
});
Accepted answer is wrong (cause it will not return content//media/external/video/media/*
)
Uri.fromFile(file).toString()
only returns something like file///storage/emulated/0/*
which is a simple absolute path of a file on the sdcard but with file//
prefix (scheme)
You can also get content
uri using MediaStore
database of Android
TEST (what returns Uri.fromFile
and what returns MediaScannerConnection
):
File videoFile = new File("/storage/emulated/0/video.mp4");
Log.i(TAG, Uri.fromFile(videoFile).toString());
MediaScannerConnection.scanFile(this, new String[] { videoFile.getAbsolutePath() }, null,
(path, uri) -> Log.i(TAG, uri.toString()));
Output:
I/Test: file:///storage/emulated/0/video.mp4
I/Test: content://media/external/video/media/268927
You might take advantage of ruby's "splat" or flattening syntax.
This makes overgrown when
clauses — you have about 10 values to test per branch if I understand correctly — a little more readable in my opinion. Additionally, you can modify the values to test at runtime. For example:
honda = ['honda', 'acura', 'civic', 'element', 'fit', ...]
toyota = ['toyota', 'lexus', 'tercel', 'rx', 'yaris', ...]
...
if include_concept_cars
honda += ['ev-ster', 'concept c', 'concept s', ...]
...
end
case car
when *toyota
# Do something for Toyota cars
when *honda
# Do something for Honda cars
...
end
Another common approach would be to use a hash as a dispatch table, with keys for each value of car
and values that are some callable object encapsulating the code you wish to execute.
Use $#
to grab the number of arguments, if it is unequal to 2 there are not enough arguments provided:
if [ $# -ne 2 ]; then
usage;
fi
Next, check if $1
equals -t
, otherwise an unknown flag was used:
if [ "$1" != "-t" ]; then
usage;
fi
Finally store $2
in FLAG
:
FLAG=$2
Note: usage()
is some function showing the syntax. For example:
function usage {
cat << EOF
Usage: script.sh -t <application>
Performs some activity
EOF
exit 1
}
To address the question
How to use Apple's new San Francisco font on a webpage
font-family: -apple-system, system-ui, BlinkMacSystemFont;
or (even shorter):
font-family: -apple-system, BlinkMacSystemFont;
should suffice.
If you want to default to system font on multiple platforms, though, I'd suggest:
font-family: -apple-system, system-ui, BlinkMacSystemFont, "Segoe UI", Roboto, Ubuntu;
-apple-system
— San Francisco in Safari (on Mac OS X and iOS); Neue Helvetica and Lucida Grande on older versions of Mac OS X.system-ui
— default UI font on a given platform.BlinkMacSystemFont
— equivalent of -apple-system
, for Chrome on Mac OS X."Segoe UI"
— Windows (Vista+) and Windows Phone.Roboto
— Android (Ice Cream Sandwich (4.0)+) and Chrome OS.Ubuntu
— all versions of Ubuntu.The idea is borrowed from the following issue on github.
You can look up fonts for other OS or older versions of them in this article on css-tricks.
The columns that needs to be converted to int can be mentioned in a dictionary also as below
df = df.astype({'col1': 'int', 'col2': 'int', 'col3': 'int'})
As others have indicated, Process.Start()
is the way to go here. However, there are a few quirks. It's worth your time to read this blog post:
http://faithlife.codes/blog/2008/01/using_processstart_to_link_to/
In summary, some browsers cause it to throw an exception for no good reason, the function can block for a while on non-UI thread so you need to make sure it happens near the end of whatever other actions you might perform at the same time, and you might want to change the cursor appearance while waiting for the browser to open.
Here's an enum with status codes and their descriptions that (at time of writing) corresponds to the HTTP status code registry.
Note that the registry might get updated, and that sometimes unofficial status codes are used.
public enum HttpStatusCode {
//1xx: Informational
CONTINUE(100, "Continue"),
SWITCHING_PROTOCOLS(101, "Switching Protocols"),
PROCESSING(102, "Processing"),
EARLY_HINTS(103, "Early Hints"),
//2xx: Success
OK(200, "OK"),
CREATED(201, "Created"),
ACCEPTED(202, "Accepted"),
NON_AUTHORITATIVE_INFORMATION(203, "Non-Authoritative Information"),
NO_CONTENT(204, "No Content"),
RESET_CONTENT(205, "Reset Content"),
PARTIAL_CONTENT(206, "Partial Content"),
MULTI_STATUS(207, "Multi-Status"),
ALREADY_REPORTED(208, "Already Reported"),
IM_USED(226, "IM Used"),
//3xx: Redirection
MULTIPLE_CHOICES(300, "Multiple Choice"),
MOVED_PERMANENTLY(301, "Moved Permanently"),
FOUND(302, "Found"),
SEE_OTHER(303, "See Other"),
NOT_MODIFIED(304, "Not Modified"),
USE_PROXY(305, "Use Proxy"),
TEMPORARY_REDIRECT(307, "Temporary Redirect"),
PERMANENT_REDIRECT(308, "Permanent Redirect"),
//4xx: Client Error
BAD_REQUEST(400, "Bad Request"),
UNAUTHORIZED(401, "Unauthorized"),
PAYMENT_REQUIRED(402, "Payment Required"),
FORBIDDEN(403, "Forbidden"),
NOT_FOUND(404, "Not Found"),
METHOD_NOT_ALLOWED(405, "Method Not Allowed"),
NOT_ACCEPTABLE(406, "Not Acceptable"),
PROXY_AUTHENTICATION_REQUIRED(407, "Proxy Authentication Required"),
REQUEST_TIMEOUT(408, "Request Timeout"),
CONFLICT(409, "Conflict"),
GONE(410, "Gone"),
LENGTH_REQUIRED(411, "Length Required"),
PRECONDITION_FAILED(412, "Precondition Failed"),
REQUEST_TOO_LONG(413, "Payload Too Large"),
REQUEST_URI_TOO_LONG(414, "URI Too Long"),
UNSUPPORTED_MEDIA_TYPE(415, "Unsupported Media Type"),
REQUESTED_RANGE_NOT_SATISFIABLE(416, "Range Not Satisfiable"),
EXPECTATION_FAILED(417, "Expectation Failed"),
MISDIRECTED_REQUEST(421, "Misdirected Request"),
UNPROCESSABLE_ENTITY(422, "Unprocessable Entity"),
LOCKED(423, "Locked"),
FAILED_DEPENDENCY(424, "Failed Dependency"),
TOO_EARLY(425, "Too Early"),
UPGRADE_REQUIRED(426, "Upgrade Required"),
PRECONDITION_REQUIRED(428, "Precondition Required"),
TOO_MANY_REQUESTS(429, "Too Many Requests"),
REQUEST_HEADER_FIELDS_TOO_LARGE(431, "Request Header Fields Too Large"),
UNAVAILABLE_FOR_LEGAL_REASONS(451, "Unavailable For Legal Reasons"),
//5xx: Server Error
INTERNAL_SERVER_ERROR(500, "Internal Server Error"),
NOT_IMPLEMENTED(501, "Not Implemented"),
BAD_GATEWAY(502, "Bad Gateway"),
SERVICE_UNAVAILABLE(503, "Service Unavailable"),
GATEWAY_TIMEOUT(504, "Gateway Timeout"),
HTTP_VERSION_NOT_SUPPORTED(505, "HTTP Version Not Supported"),
VARIANT_ALSO_NEGOTIATES(506, "Variant Also Negotiates"),
INSUFFICIENT_STORAGE(507, "Insufficient Storage"),
LOOP_DETECTED(508, "Loop Detected"),
NOT_EXTENDED(510, "Not Extended"),
NETWORK_AUTHENTICATION_REQUIRED(511, "Network Authentication Required");
private final int value;
private final String description;
HttpStatusCode(int value, String description) {
this.value = value;
this.description = description;
}
public int getValue() {
return value;
}
public String getDescription() {
return description;
}
@Override
public String toString() {
return value + " " + description;
}
public static HttpStatusCode getByValue(int value) {
for(HttpStatusCode status : values()) {
if(status.value == value) return status;
}
throw new IllegalArgumentException("Invalid status code: " + value);
}
}
You could use cut
df$valueBin <- cut(df$value, c(-Inf, 250, 500, 1000, 2000, Inf),
labels=c('<=250', '250-500', '500-1,000', '1,000-2,000', '>2,000'))
set.seed(24)
df <- data.frame(value= sample(0:2500, 100, replace=TRUE))
If you don't want to repeat the list twice (as per @J W's answer), then put the updates in a table variable and use a JOIN
in the UPDATE
:
declare @ToDo table (FromName varchar(10), ToName varchar(10))
insert into @ToDo(FromName,ToName) values
('AAA','BBB'),
('CCC','DDD'),
('EEE','FFF')
update ts set LastName = ToName
from dbo.TestStudents ts
inner join
@ToDo t
on
ts.LastName = t.FromName
I give you two answers. npm combined with other tools is powerful but requires some work to setup. If you just want to download some libraries, you might want to use Library Manager instead (released in Visual Studio 15.8).
First add package.json in the root of you project. Add the following content:
{
"version": "1.0.0",
"name": "asp.net",
"private": true,
"devDependencies": {
"gulp": "3.9.1",
"del": "3.0.0"
},
"dependencies": {
"jquery": "3.3.1",
"jquery-validation": "1.17.0",
"jquery-validation-unobtrusive": "3.2.10",
"bootstrap": "3.3.7"
}
}
This will make NPM download Bootstrap, JQuery and other libraries that is used in a new asp.net core project to a folder named node_modules. Next step is to copy the files to an appropriate place. To do this we will use gulp, which also was downloaded by NPM. Then add a new file in the root of you project named gulpfile.js. Add the following content:
/// <binding AfterBuild='default' Clean='clean' />
/*
This file is the main entry point for defining Gulp tasks and using Gulp plugins.
Click here to learn more. http://go.microsoft.com/fwlink/?LinkId=518007
*/
var gulp = require('gulp');
var del = require('del');
var nodeRoot = './node_modules/';
var targetPath = './wwwroot/lib/';
gulp.task('clean', function () {
return del([targetPath + '/**/*']);
});
gulp.task('default', function () {
gulp.src(nodeRoot + "bootstrap/dist/js/*").pipe(gulp.dest(targetPath + "/bootstrap/dist/js"));
gulp.src(nodeRoot + "bootstrap/dist/css/*").pipe(gulp.dest(targetPath + "/bootstrap/dist/css"));
gulp.src(nodeRoot + "bootstrap/dist/fonts/*").pipe(gulp.dest(targetPath + "/bootstrap/dist/fonts"));
gulp.src(nodeRoot + "jquery/dist/jquery.js").pipe(gulp.dest(targetPath + "/jquery/dist"));
gulp.src(nodeRoot + "jquery/dist/jquery.min.js").pipe(gulp.dest(targetPath + "/jquery/dist"));
gulp.src(nodeRoot + "jquery/dist/jquery.min.map").pipe(gulp.dest(targetPath + "/jquery/dist"));
gulp.src(nodeRoot + "jquery-validation/dist/*.js").pipe(gulp.dest(targetPath + "/jquery-validation/dist"));
gulp.src(nodeRoot + "jquery-validation-unobtrusive/dist/*.js").pipe(gulp.dest(targetPath + "/jquery-validation-unobtrusive"));
});
This file contains a JavaScript code that is executed when the project is build and cleaned. It’s will copy all necessary files to lib2 (not lib – you can easily change this). I have used the same structure as in a new project, but it’s easy to change files to a different location. If you move the files, make sure you also update _Layout.cshtml. Note that all files in the lib2-directory will be removed when the project is cleaned.
If you right click on gulpfile.js, you can select Task Runner Explorer. From here you can run gulp manually to copy or clean files.
Gulp could also be useful for other tasks like minify JavaScript and CSS-files:
https://docs.microsoft.com/en-us/aspnet/core/client-side/using-gulp?view=aspnetcore-2.1
Right click on you project and select Manage client side-libraries. The file libman.json is now open. In this file you specify which library and files to use and where they should be stored locally. Really simple! The following file copies the default libraries that is used when creating a new ASP.NET Core 2.1 project:
{
"version": "1.0",
"defaultProvider": "cdnjs",
"libraries": [
{
"library": "[email protected]",
"files": [ "jquery.js", "jquery.min.map", "jquery.min.js" ],
"destination": "wwwroot/lib/jquery/dist/"
},
{
"library": "[email protected]",
"files": [ "additional-methods.js", "additional-methods.min.js", "jquery.validate.js", "jquery.validate.min.js" ],
"destination": "wwwroot/lib/jquery-validation/dist/"
},
{
"library": "[email protected]",
"files": [ "jquery.validate.unobtrusive.js", "jquery.validate.unobtrusive.min.js" ],
"destination": "wwwroot/lib/jquery-validation-unobtrusive/"
},
{
"library": "[email protected]",
"files": [
"css/bootstrap.css",
"css/bootstrap.css.map",
"css/bootstrap.min.css",
"css/bootstrap.min.css.map",
"css/bootstrap-theme.css",
"css/bootstrap-theme.css.map",
"css/bootstrap-theme.min.css",
"css/bootstrap-theme.min.css.map",
"fonts/glyphicons-halflings-regular.eot",
"fonts/glyphicons-halflings-regular.svg",
"fonts/glyphicons-halflings-regular.ttf",
"fonts/glyphicons-halflings-regular.woff",
"fonts/glyphicons-halflings-regular.woff2",
"js/bootstrap.js",
"js/bootstrap.min.js",
"js/npm.js"
],
"destination": "wwwroot/lib/bootstrap/dist"
},
{
"library": "[email protected]",
"files": [ "list.js", "list.min.js" ],
"destination": "wwwroot/lib/listjs"
}
]
}
If you move the files, make sure you also update _Layout.cshtml.
you can also try something like this as well
<input type="button" value="text" name="text" onClick="{action}; return false" class="fwm_button">
and CSS class
.fwm_button {
color: white;
font-weight: bold;
background-color: #6699cc;
border: 2px outset;
border-top-color: #aaccff;
border-left-color: #aaccff;
border-right-color: #003366;
border-bottom-color: #003366;
}
An example is given here
Simple run your project online i.e mvn clean install
. It fetches all the latest dependencies that you mention in your pom.xml and built the project
Simply add this to your java module's build.gradle. It will include dependent libraries in archive.
mainClassName = "com.company.application.Main"
jar {
manifest {
attributes "Main-Class": "$mainClassName"
}
from {
configurations.compile.collect { it.isDirectory() ? it : zipTree(it) }
}
}
This will result in [module_name]/build/libs/[module_name].jar file.
You can do this with plain js by using
location.host
, same as document.location.hostname
Test-Path may give odd answer. E.g. "Test-Path c:\temp\ -PathType leaf" gives false, but "Test-Path c:\temp* -PathType leaf" gives true. Sad :(
I'm guessing this will help.
When passed as functions arguments, arrays act the same way as pointers. So you don't need to reference them. Simply type:
int x[]
or
int x[a]
. Both ways will work. I guess its the same thing Konrad Rudolf was saying, figured as much.
Anson's answer will work fine for the simple case, but if you're going to do any more complex date calculations I'd recommend checking out Joda Time. It will make your life much easier.
FYI in Joda Time you could do
DateTime dt = new DateTime();
DateTime fiveDaysEarlier = dt.minusDays(5);
I believe, by default, boto picks the region which is set in aws cli. You can run command #aws configure and press enter (it shows what creds you have set in aws cli with region)twice to confirm your region.
It would appear that the **
syntax is supported by git
as of version 1.8.2.1
according to the documentation.
Two consecutive asterisks ("
**
") in patterns matched against full pathname may have special meaning:
A leading "
**
" followed by a slash means match in all directories. For example, "**/foo
" matches file or directory "foo
" anywhere, the same as pattern "foo
". "**/foo/bar
" matches file or directory "bar
" anywhere that is directly under directory "foo
".A trailing "
/**
" matches everything inside. For example, "abc/**
" matches all files inside directory "abc
", relative to the location of the.gitignore
file, with infinite depth.A slash followed by two consecutive asterisks then a slash matches zero or more directories. For example, "
a/**/b
" matches "a/b
", "a/x/b
", "a/x/y/b
" and so on.Other consecutive asterisks are considered invalid.
You can use google map Obtaining User Location here!
After obtaining your location(longitude and latitude), you can use google place api
This code can help you get your location easily but not the best way.
locationManager = (LocationManager) getSystemService(Context.LOCATION_SERVICE);
Criteria criteria = new Criteria();
String bestProvider = locationManager.getBestProvider(criteria, true);
Location location = locationManager.getLastKnownLocation(bestProvider);
Javascript array shift() is slow especially when holding many elements. I know two ways to implement queue with amortized O(1) complexity.
First is by using circular buffer and table doubling. I have implemented this before. You can see my source code here https://github.com/kevyuu/rapid-queue
The second way is by using two stack. This is the code for queue with two stack
function createDoubleStackQueue() {
var that = {};
var pushContainer = [];
var popContainer = [];
function moveElementToPopContainer() {
while (pushContainer.length !==0 ) {
var element = pushContainer.pop();
popContainer.push(element);
}
}
that.push = function(element) {
pushContainer.push(element);
};
that.shift = function() {
if (popContainer.length === 0) {
moveElementToPopContainer();
}
if (popContainer.length === 0) {
return null;
} else {
return popContainer.pop();
}
};
that.front = function() {
if (popContainer.length === 0) {
moveElementToPopContainer();
}
if (popContainer.length === 0) {
return null;
}
return popContainer[popContainer.length - 1];
};
that.length = function() {
return pushContainer.length + popContainer.length;
};
that.isEmpty = function() {
return (pushContainer.length + popContainer.length) === 0;
};
return that;}
This is performance comparison using jsPerf
CircularQueue.shift() vs Array.shift()
http://jsperf.com/rapidqueue-shift-vs-array-shift
As you can see it is significantly faster with large dataset
I haven't played around with it much but eclipse/pydev feels nice.
The mod_authz_host
directives need to be inside a <Location>
or <Directory>
block but I've used the former within <VirtualHost>
like so for Apache 2.2:
<VirtualHost *:8080>
<Location />
Order deny,allow
Deny from all
Allow from 127.0.0.1
</Location>
...
</VirtualHost>
Reference: https://askubuntu.com/questions/262981/how-to-install-mod-authz-host-in-apache
This fiddle shows how
ul, li {
display:inline
}
Great references on lists and css here:
requests
does not handle parsing XML responses, no. XML responses are much more complex in nature than JSON responses, how you'd serialize XML data into Python structures is not nearly as straightforward.
Python comes with built-in XML parsers. I recommend you use the ElementTree API:
import requests
from xml.etree import ElementTree
response = requests.get(url)
tree = ElementTree.fromstring(response.content)
or, if the response is particularly large, use an incremental approach:
response = requests.get(url, stream=True)
# if the server sent a Gzip or Deflate compressed response, decompress
# as we read the raw stream:
response.raw.decode_content = True
events = ElementTree.iterparse(response.raw)
for event, elem in events:
# do something with `elem`
The external lxml project builds on the same API to give you more features and power still.
It seems to me like using a REGEX in this case would just be overkill. Why not just just strpos to find the space character. Also, there's nothing special about the space character in regular expressions, you should be able to search for it the same as you would search for any other character. That is, unless you disabled pattern whitespace, which would hardly be necessary in this case.
One possibility is to delete to cookie you are looking for the expiration date from and rewrite it. Then you'll know the expiration date.
You must wrap the returning object literal into parentheses. Otherwise curly braces will be considered to denote the function’s body. The following works:
p => ({ foo: 'bar' });
You don't need to wrap any other expression into parentheses:
p => 10;
p => 'foo';
p => true;
p => [1,2,3];
p => null;
p => /^foo$/;
and so on.
Reference: MDN - Returning object literals
Your code is almost right! You are right, you are just missing one step. When you read in the file, you are reading it as a string; but you want to turn the string back into a dictionary.
The error message you saw was because self.whip
was a string, not a dictionary.
I first wrote that you could just feed the string into dict()
but that doesn't work! You need to do something else.
Here is the simplest way: feed the string into eval()
. Like so:
def reading(self):
s = open('deed.txt', 'r').read()
self.whip = eval(s)
You can do it in one line, but I think it looks messy this way:
def reading(self):
self.whip = eval(open('deed.txt', 'r').read())
But eval()
is sometimes not recommended. The problem is that eval()
will evaluate any string, and if someone tricked you into running a really tricky string, something bad might happen. In this case, you are just running eval()
on your own file, so it should be okay.
But because eval()
is useful, someone made an alternative to it that is safer. This is called literal_eval
and you get it from a Python module called ast
.
import ast
def reading(self):
s = open('deed.txt', 'r').read()
self.whip = ast.literal_eval(s)
ast.literal_eval()
will only evaluate strings that turn into the basic Python types, so there is no way that a tricky string can do something bad on your computer.
Actually, best practice in Python is to use a with
statement to make sure the file gets properly closed. Rewriting the above to use a with
statement:
import ast
def reading(self):
with open('deed.txt', 'r') as f:
s = f.read()
self.whip = ast.literal_eval(s)
In the most popular Python, known as "CPython", you usually don't need the with
statement as the built-in "garbage collection" features will figure out that you are done with the file and will close it for you. But other Python implementations, like "Jython" (Python for the Java VM) or "PyPy" (a really cool experimental system with just-in-time code optimization) might not figure out to close the file for you. It's good to get in the habit of using with
, and I think it makes the code pretty easy to understand.
If you are using this in the Reflection C#, you can get the guid from the property attribute as follows
var propertyAttributes= property.GetCustomAttributes();
foreach(var attribute in propertyAttributes)
{
var myguid= Guid.Parse(attribute.Id.ToString());
}
Most answers said that how to set #ifdef DEBUG and none of them saying how to determinate debug/release build.
My opinion:
You just need to specify text-decoration: underline;
with pseudo-class :hover
.
<span class="underline-on-hover">Hello world</span>
.underline-on-hover:hover {
text-decoration: underline;
}
I have whipped up a working Code Pen Demo.
Here is my approach:
var preloadImages = function (srcs, imgs, callback) {
var img;
var remaining = srcs.length;
for (var i = 0; i < srcs.length; i++) {
img = new Image;
img.onload = function () {
--remaining;
if (remaining <= 0) {
callback();
}
};
img.src = srcs[i];
imgs.push(img);
}
};
If you want to refresh the entire page, it makes no sense to use AJAX. Use normal Javascript to post the form element in that page. Make sure the form submits to the same page, or that the form submits to a page which then redirects back to that page
Javascript to be used (always in myForm.php):
function submitform()
{
document.getElementById('myForm').submit();
}
Suppose your form is on myForm.php: Method 1:
<form action="./myForm.php" method="post" id="myForm">
...
</form>
Method 2:
myForm.php:
<form action="./myFormActor.php" method="post" id="myForm">
...
</form>
myFormActor.php:
<?php
//all code here, no output
header("Location: ./myForm.php");
?>
I can elaborate on the details of DLLs in Windows to help clarify those mysteries to my friends here in *NIX-land...
A DLL is like a Shared Object file. Both are images, ready to load into memory by the program loader of the respective OS. The images are accompanied by various bits of metadata to help linkers and loaders make the necessary associations and use the library of code.
Windows DLLs have an export table. The exports can be by name, or by table position (numeric). The latter method is considered "old school" and is much more fragile -- rebuilding the DLL and changing the position of a function in the table will end in disaster, whereas there is no real issue if linking of entry points is by name. So, forget that as an issue, but just be aware it's there if you work with "dinosaur" code such as 3rd-party vendor libs.
Windows DLLs are built by compiling and linking, just as you would for an EXE (executable application), but the DLL is meant to not stand alone, just like an SO is meant to be used by an application, either via dynamic loading, or by link-time binding (the reference to the SO is embedded in the application binary's metadata, and the OS program loader will auto-load the referenced SO's). DLLs can reference other DLLs, just as SOs can reference other SOs.
In Windows, DLLs will make available only specific entry points. These are called "exports". The developer can either use a special compiler keyword to make a symbol an externally-visible (to other linkers and the dynamic loader), or the exports can be listed in a module-definition file which is used at link time when the DLL itself is being created. The modern practice is to decorate the function definition with the keyword to export the symbol name. It is also possible to create header files with keywords which will declare that symbol as one to be imported from a DLL outside the current compilation unit. Look up the keywords __declspec(dllexport) and __declspec(dllimport) for more information.
One of the interesting features of DLLs is that they can declare a standard "upon load/unload" handler function. Whenever the DLL is loaded or unloaded, the DLL can perform some initialization or cleanup, as the case may be. This maps nicely into having a DLL as an object-oriented resource manager, such as a device driver or shared object interface.
When a developer wants to use an already-built DLL, she must either reference an "export library" (*.LIB) created by the DLL developer when she created the DLL, or she must explicitly load the DLL at run time and request the entry point address by name via the LoadLibrary() and GetProcAddress() mechanisms. Most of the time, linking against a LIB file (which simply contains the linker metadata for the DLL's exported entry points) is the way DLLs get used. Dynamic loading is reserved typically for implementing "polymorphism" or "runtime configurability" in program behaviors (accessing add-ons or later-defined functionality, aka "plugins").
The Windows way of doing things can cause some confusion at times; the system uses the .LIB extension to refer to both normal static libraries (archives, like POSIX *.a files) and to the "export stub" libraries needed to bind an application to a DLL at link time. So, one should always look to see if a *.LIB file has a same-named *.DLL file; if not, chances are good that *.LIB file is a static library archive, and not export binding metadata for a DLL.
The particular format for strptime
:
datetime.datetime.strptime(string_date, "%Y-%m-%d %H:%M:%S.%f")
#>>> datetime.datetime(2013, 9, 28, 20, 30, 55, 782000)
Functions from http://wi-fizzle.com/downloads/base64.sql contain some error when in encoded string are 32-byte (space), ex BASE64_ENCODE(CONCAT(CHAR(15), CHAR(32))). Here is corrected function
DELIMITER $$
USE `YOUR DATABASE`$$
DROP TABLE IF EXISTS core_base64_data$$
CREATE TABLE core_base64_data (c CHAR(1) BINARY, val TINYINT)$$
INSERT INTO core_base64_data VALUES
('A',0), ('B',1), ('C',2), ('D',3), ('E',4), ('F',5), ('G',6), ('H',7), ('I',8), ('J',9),
('K',10), ('L',11), ('M',12), ('N',13), ('O',14), ('P',15), ('Q',16), ('R',17), ('S',18), ('T',19),
('U',20), ('V',21), ('W',22), ('X',23), ('Y',24), ('Z',25), ('a',26), ('b',27), ('c',28), ('d',29),
('e',30), ('f',31), ('g',32), ('h',33), ('i',34), ('j',35), ('k',36), ('l',37), ('m',38), ('n',39),
('o',40), ('p',41), ('q',42), ('r',43), ('s',44), ('t',45), ('u',46), ('v',47), ('w',48), ('x',49),
('y',50), ('z',51), ('0',52), ('1',53), ('2',54), ('3',55), ('4',56), ('5',57), ('6',58), ('7',59),
('8',60), ('9',61), ('+',62), ('/',63), ('=',0) $$
DROP FUNCTION IF EXISTS `BASE64_ENCODE`$$
CREATE DEFINER=`YOUR DATABASE`@`%` FUNCTION `BASE64_ENCODE`(input BLOB) RETURNS BLOB
DETERMINISTIC
SQL SECURITY INVOKER
BEGIN
DECLARE ret BLOB DEFAULT '';
DECLARE done TINYINT DEFAULT 0;
IF input IS NULL THEN
RETURN NULL;
END IF;
each_block:
WHILE NOT done DO BEGIN
DECLARE accum_value BIGINT UNSIGNED DEFAULT 0;
DECLARE in_count TINYINT DEFAULT 0;
DECLARE out_count TINYINT;
each_input_char:
WHILE in_count < 3 DO BEGIN
DECLARE first_char BLOB(1);
IF LENGTH(input) = 0 THEN
SET done = 1;
SET accum_value = accum_value << (8 * (3 - in_count));
LEAVE each_input_char;
END IF;
SET first_char = SUBSTRING(input,1,1);
SET input = SUBSTRING(input,2);
SET accum_value = (accum_value << 8) + ASCII(first_char);
SET in_count = in_count + 1;
END; END WHILE;
-- We've now accumulated 24 bits; deaccumulate into base64 characters
-- We have to work from the left, so use the third byte position and shift left
CASE
WHEN in_count = 3 THEN SET out_count = 4;
WHEN in_count = 2 THEN SET out_count = 3;
WHEN in_count = 1 THEN SET out_count = 2;
ELSE RETURN ret;
END CASE;
WHILE out_count > 0 DO BEGIN
BEGIN
DECLARE out_char CHAR(1);
DECLARE base64_getval CURSOR FOR SELECT c FROM core_base64_data WHERE val = (accum_value >> 18);
OPEN base64_getval;
FETCH base64_getval INTO out_char;
CLOSE base64_getval;
SET ret = CONCAT(ret,out_char);
SET out_count = out_count - 1;
SET accum_value = accum_value << 6 & 0xffffff;
END;
END; END WHILE;
CASE
WHEN in_count = 2 THEN SET ret = CONCAT(ret,'=');
WHEN in_count = 1 THEN SET ret = CONCAT(ret,'==');
ELSE BEGIN END;
END CASE;
END; END WHILE;
RETURN ret;
END$$
DELIMITER ;
select top 1 yr,count(*) from movie
join casting on casting.movieid=movie.id
join actor on casting.actorid = actor.id
where actor.name = 'John Travolta'
group by yr order by 2 desc
You can redirect the output of a command to a file:
$ cat file > copy_file
or append to it
$ cat file >> copy_file
If you want to write directly the command is echo 'text'
$ echo 'Hello World' > file
The Dr. Memory (http://drmemory.org) tool comes with a system call tracing tool called drstrace that lists all system calls made by a target application along with their arguments: http://drmemory.org/strace_for_windows.html
For programmatically enforcing system call policies, you could use the same underlying engines as drstrace: the DynamoRIO tool platform (http://dynamorio.org) and the DrSyscall system call monitoring library (http://drmemory.org/docs/page_drsyscall.html). These use dynamic binary translation technology, which does incur some overhead (20%-30% in steady state, but much higher when running new code such as launching a big desktop app), which may or may not be suitable for your purposes.
You're removing and then incrementing, which means you'll be one ahead of yourself. Instead, remove in reverse so you never mess up your next item.
for (int i = ChunkList.Count-1; i >=0; i--)
{
if (ChunkList[i].UniqueID == ChunkID)
{
ChunkList.RemoveAt(i);
}
}
You can access any REST API with PHPs cURL
Extension. However, the API Documentation (Methods, Parameters etc.) must be provided by your Client!
Example:
// Method: POST, PUT, GET etc
// Data: array("param" => "value") ==> index.php?param=value
function CallAPI($method, $url, $data = false)
{
$curl = curl_init();
switch ($method)
{
case "POST":
curl_setopt($curl, CURLOPT_POST, 1);
if ($data)
curl_setopt($curl, CURLOPT_POSTFIELDS, $data);
break;
case "PUT":
curl_setopt($curl, CURLOPT_PUT, 1);
break;
default:
if ($data)
$url = sprintf("%s?%s", $url, http_build_query($data));
}
// Optional Authentication:
curl_setopt($curl, CURLOPT_HTTPAUTH, CURLAUTH_BASIC);
curl_setopt($curl, CURLOPT_USERPWD, "username:password");
curl_setopt($curl, CURLOPT_URL, $url);
curl_setopt($curl, CURLOPT_RETURNTRANSFER, 1);
$result = curl_exec($curl);
curl_close($curl);
return $result;
}
typed mongod and getting error
Errors:
exception in initAndListen: NonExistentPath: Data directory /data/db not found., terminating
shuts down with Code 100
Then try with (create data and db folder with all permission)
mongod --dbpath=/data
use new tab and type mongo.
If still you are facing prob then you can check for mac catalina: (https://docs.mongodb.com/manual/tutorial/install-mongodb-on-os-x-tarball/)
for windows: https://docs.mongodb.com/manual/tutorial/install-mongodb-on-windows-unattended/
As Marc says, you run it exactly like you would from the command line. See Creating SQL Server Agent Jobs on MSDN.
Anything wrong with a one-liner?
$ perl -pi.bak -e 's/blue/red/g' *_classification.dat
Explanation
-p
processes, then prints <>
line by line-i
activates in-place editing. Files are backed up using the .bak
extensionI'd use popen() (++waqas).
But sometimes you need reading and writing...
It seems like nobody does things the hard way any more.
(Assuming a Unix/Linux/Mac environment, or perhaps Windows with a POSIX compatibility layer...)
enum PIPE_FILE_DESCRIPTERS
{
READ_FD = 0,
WRITE_FD = 1
};
enum CONSTANTS
{
BUFFER_SIZE = 100
};
int
main()
{
int parentToChild[2];
int childToParent[2];
pid_t pid;
string dataReadFromChild;
char buffer[BUFFER_SIZE + 1];
ssize_t readResult;
int status;
ASSERT_IS(0, pipe(parentToChild));
ASSERT_IS(0, pipe(childToParent));
switch (pid = fork())
{
case -1:
FAIL("Fork failed");
exit(-1);
case 0: /* Child */
ASSERT_NOT(-1, dup2(parentToChild[READ_FD], STDIN_FILENO));
ASSERT_NOT(-1, dup2(childToParent[WRITE_FD], STDOUT_FILENO));
ASSERT_NOT(-1, dup2(childToParent[WRITE_FD], STDERR_FILENO));
ASSERT_IS(0, close(parentToChild [WRITE_FD]));
ASSERT_IS(0, close(childToParent [READ_FD]));
/* file, arg0, arg1, arg2 */
execlp("ls", "ls", "-al", "--color");
FAIL("This line should never be reached!!!");
exit(-1);
default: /* Parent */
cout << "Child " << pid << " process running..." << endl;
ASSERT_IS(0, close(parentToChild [READ_FD]));
ASSERT_IS(0, close(childToParent [WRITE_FD]));
while (true)
{
switch (readResult = read(childToParent[READ_FD],
buffer, BUFFER_SIZE))
{
case 0: /* End-of-File, or non-blocking read. */
cout << "End of file reached..." << endl
<< "Data received was ("
<< dataReadFromChild.size() << "): " << endl
<< dataReadFromChild << endl;
ASSERT_IS(pid, waitpid(pid, & status, 0));
cout << endl
<< "Child exit staus is: " << WEXITSTATUS(status) << endl
<< endl;
exit(0);
case -1:
if ((errno == EINTR) || (errno == EAGAIN))
{
errno = 0;
break;
}
else
{
FAIL("read() failed");
exit(-1);
}
default:
dataReadFromChild . append(buffer, readResult);
break;
}
} /* while (true) */
} /* switch (pid = fork())*/
}
You also might want to play around with select() and non-blocking reads.
fd_set readfds;
struct timeval timeout;
timeout.tv_sec = 0; /* Seconds */
timeout.tv_usec = 1000; /* Microseconds */
FD_ZERO(&readfds);
FD_SET(childToParent[READ_FD], &readfds);
switch (select (1 + childToParent[READ_FD], &readfds, (fd_set*)NULL, (fd_set*)NULL, & timeout))
{
case 0: /* Timeout expired */
break;
case -1:
if ((errno == EINTR) || (errno == EAGAIN))
{
errno = 0;
break;
}
else
{
FAIL("Select() Failed");
exit(-1);
}
case 1: /* We have input */
readResult = read(childToParent[READ_FD], buffer, BUFFER_SIZE);
// However you want to handle it...
break;
default:
FAIL("How did we see input on more than one file descriptor?");
exit(-1);
}
Solution in 2 steps (if you are using centOS)
Download the Microsoft core fonts rpm package.
[root@WEBSVR~/]# wget http://www.itzgeek.com/msttcore-fonts-2.0-3.noarch.rpm
Install rpm package.
[root@WEBSVR~/]# rpm -Uvh msttcore-fonts-2.0-3.noarch.rpm
Unlike in some laguages, empty
is not a keyword in Python. Python lists are constructed form the ground up, so if element i
has a value, then element i-1
has a value, for all i > 0
.
To do an equality check, you usually use either the ==
comparison operator.
>>> my_list = ["asdf", 0, 42, '', None, True, "LOLOL"]
>>> my_list[0] == "asdf"
True
>>> my_list[4] is None
True
>>> my_list[2] == "the universe"
False
>>> my_list[3]
""
>>> my_list[3] == ""
True
Here's a link to the strip
method: your comment indicates to me that you may have some strange file parsing error going on, so make sure you're stripping off newlines and extraneous whitespace before you expect an empty line.
This is not only a 'newbie' scenario. I just ran across this compiler message (GCC 5.4) when refactoring a class to remove some constructor parameters. I forgot to update both the declaration and definition, and the compiler spit out this unintuitive error.
The bottom line seems to be this: If the compiler can't match the definition's signature to the declaration's signature it thinks the definition is not a constructor and then doesn't know how to parse the code and displays this error. Which is also what happened for the OP: std::string
is not the same type as string
so the declaration's signature differed from the definition's and this message was spit out.
As a side note, it would be nice if the compiler looked for almost-matching constructor signatures and upon finding one suggested that the parameters didn't match rather than giving this message.
My solution
SET sql_mode='';
UPDATE tnx_k2_items
SET created_by = 790
, modified = '0000-00-00 00:00:00'
, modified_by = 0
DazWorrall's answer is spot on. Here's a variation that might be useful if your code is structured differently than the OP's:
num_rows_deleted = db.session.query(Model).delete()
Also, don't forget that the deletion won't take effect until you commit, as in this snippet:
try:
num_rows_deleted = db.session.query(Model).delete()
db.session.commit()
except:
db.session.rollback()
As you can't import a .txt file, I would suggest to read words this way.
list_ = open("world.txt").read().split()