I got the similiar issue, and resolved it by the following. The issue looks not related to the Route definition but definition of the parameters, just need to give it a default value.

----Code with issue: Message: "No HTTP resource was found that matches the request URI

    [HttpGet]
    [Route("students/list")]
    public StudentListResponse GetStudents(int? ClassId, int? GradeId)
    {
       ...
    }

----Code without issue.

    [HttpGet]
    [Route("students/list")]
    public StudentListResponse GetStudents(int? ClassId=null, int? GradeId=null)
    {
       ...
    }

<img id="output_image" height=50px width=50px\
<input type="file" accept="image/*" onchange="preview_image(event)">

<script type"text/javascript">
  function preview_image(event) {
    var reader = new FileReader();
    reader.onload = function(){
      var output = document.getElementById('output_image');
      output.src = reader.result;
    }
    reader.readAsDataURL(event.target.files[0]);
  }
</script>

Hope this work

def break_words(stuff):
    """This function will break up words for us."""
    words = stuff.split(' ')
    return words

def sort_words(words):
    """Sorts the words."""
    return sorted(words)

def print_first_word(words):
    """Prints the first word after popping it off."""
    word = words.pop(0)
    print (word)

def print_last_word(words):
    """Prints the last word after popping it off."""
    word = words.pop(-1)
    print(word)

def sort_sentence(sentence):
    """Takes in a full sentence and returns the sorted words."""
    words = break_words(sentence)
    return sort_words(words)

def print_first_and_last(sentence):
    """Prints the first and last words of the sentence."""
    words = break_words(sentence)
    print_first_word(words)
    print_last_word(words)

def print_first_and_last_sorted(sentence):
    """Sorts the words then prints the first and last one."""
    words = sort_sentence(sentence)
    print_first_word(words)
    print_last_word(words)


print ("Let's practice everything.")
print ('You\'d need to know \'bout escapes with \\ that do \n newlines and \t tabs.')

poem = """
\tThe lovely world
with logic so firmly planted
cannot discern \n the needs of love
nor comprehend passion from intuition
and requires an explantion
\n\t\twhere there is none.
"""


print ("--------------")
print (poem)
print ("--------------")

five = 10 - 2 + 3 - 5
print ("This should be five: %s" % five)

def secret_formula(start_point):
    jelly_beans = start_point * 500
    jars = jelly_beans / 1000
    crates = jars / 100
    return jelly_beans, jars, crates


start_point = 10000
jelly_beans, jars, crates = secret_formula(start_point)

print ("With a starting point of: %d" % start_point)
print ("We'd have %d jeans, %d jars, and %d crates." % (jelly_beans, jars, crates))

start_point = start_point / 10

print ("We can also do that this way:")
print ("We'd have %d beans, %d jars, and %d crabapples." % secret_formula(start_point))


sentence = "All god\tthings come to those who weight."

words =  break_words(sentence)
sorted_words =  sort_words(words)

print_first_word(words)
print_last_word(words)
print_first_word(sorted_words)
print_last_word(sorted_words)
sorted_words =  sort_sentence(sentence)
print (sorted_words)

print_first_and_last(sentence)
print_first_and_last_sorted(sentence)

The top voted answer is deprecated in Bootstrap 3.3 and will be removed in v4. Try this instead:

JavaScript:

// Fill modal with content from link href
$("#myModal").on("show.bs.modal", function(e) {
    var link = $(e.relatedTarget);
    $(this).find(".modal-body").load(link.attr("href"));
});

Html (Based on the official example. Note that for Bootstrap 3.* we set data-remote="false" to disable the deprecated Bootstrap load function):

<!-- Link trigger modal -->
<a href="remoteContent.html" data-remote="false" data-toggle="modal" data-target="#myModal" class="btn btn-default">
    Launch Modal
</a>

<!-- Default bootstrap modal example -->
<div class="modal fade" id="myModal" tabindex="-1" role="dialog" aria-labelledby="myModalLabel" aria-hidden="true">
  <div class="modal-dialog">
    <div class="modal-content">
      <div class="modal-header">
        <button type="button" class="close" data-dismiss="modal" aria-label="Close"><span aria-hidden="true">&times;</span></button>
        <h4 class="modal-title" id="myModalLabel">Modal title</h4>
      </div>
      <div class="modal-body">
        ...
      </div>
      <div class="modal-footer">
        <button type="button" class="btn btn-default" data-dismiss="modal">Close</button>
        <button type="button" class="btn btn-primary">Save changes</button>
      </div>
    </div>
  </div>
</div>

Try it yourself: https://jsfiddle.net/ednon5d1/

I wrote the following code to convert an image from sdcard to a Base64 encoded string to send as a JSON object.And it works great:

String filepath = "/sdcard/temp.png";
File imagefile = new File(filepath);
FileInputStream fis = null;
try {
    fis = new FileInputStream(imagefile);
    } catch (FileNotFoundException e) {
    e.printStackTrace();
}

Bitmap bm = BitmapFactory.decodeStream(fis);
ByteArrayOutputStream baos = new ByteArrayOutputStream();  
bm.compress(Bitmap.CompressFormat.JPEG, 100 , baos);    
byte[] b = baos.toByteArray(); 
encImage = Base64.encodeToString(b, Base64.DEFAULT);

You can use $.ajax call to get the value and then put it in the div you want to. One thing you must know is you cannot receive JSON Data. You have to use JSONP.

Code would be like this:

function CallURL()  {
    $.ajax({
        url: 'https://www.googleapis.com/freebase/v1/text/en/bob_dylan',
        type: "GET",
        dataType: "jsonp",
        async: false,
        success: function(msg)  {
            JsonpCallback(msg);
        },
        error: function()  {
            ErrorFunction();
        }
    });
}

function JsonpCallback(json)  {
    document.getElementById('summary').innerHTML = json.result;
}

If you have the test binary installed or ksh has a matching built-in function, you could use it to perform your checks. Usually /bin/[ is a symbolic link to test:

if [ -e "$file_name" ]; then
  echo "File exists"
fi

if [ -z "$used_var" ]; then
  echo "Variable is empty"
fi

Interesting if maddening puzzle...but here's the best I could get:

The data seems to repeat every 8 bytes or so.

import struct
import base64

target = \
r'''Q5YACgAAAABDlgAbAAAAAEOWAC0AAAAAQ5YAPwAAAABDlgdNAAAAAEOWB18AAAAAQ5YH 
[snip.]
ZAAAAABExxniAAAAAETH/rQAAAAARMf/MwAAAABEx/+yAAAAAETIADEAAAAA''' 

data = base64.b64decode(target)

cleaned_data = []
struct_format = ">ff"
for i in range(len(data) // 8):
   cleaned_data.append(struct.unpack_from(struct_format, data, 8*i))

That gives output like the following (a sampling of lines from the first 100 or so):

(300.00030517578125, 0.0)
(300.05975341796875, 241.93943786621094)
(301.05612182617187, 0.0)
(301.05667114257812, 8.7439727783203125)
(326.9617919921875, 0.0)
(326.96826171875, 0.0)
(328.34432983398438, 280.55218505859375)

That first number does seem to monotonically increase through the entire set. If you plot it:

import matplotlib.pyplot as plt
f, ax = plt.subplots()
ax.plot(*zip(*cleaned_data))

format = 'hhhh' (possibly with various paddings/directions (e.g. '<hhhh', '<xhhhh') also might be worth a look (again, random lines):

(-27069, 2560, 0, 0)
(-27069, 8968, 0, 0)
(-27069, 13576, 3139, -18487)
(-27069, 18184, 31043, -5184)
(-27069, -25721, -25533, -8601)
(-27069, -7289, 0, 0)
(-25533, 31066, 0, 0)
(-25533, -29350, 0, 0)
(-25533, 25179, 0, 0)
(-24509, -1888, 0, 0)
(-24509, -4447, 0, 0)
(-23741, -14725, 32067, 27475)
(-23741, -3973, 0, 0)
(-23485, 4908, -29629, -20922)

Also, to use your new namespaced class you can also do

var jenine:com.newnamespace.subspace.Jenine = com.newnamespace.subspace.Jenine()

Use

git config --global core.pager cat

to get rid of a pager for all commands for all repositories.

You can also disable paging for single Git subcommands by using pager.<cmd> setting instead of core.pager, and you can change your settings per Git repository (omit --global).

See man git-config and search for pager.<cmd> for details.

Alright, so let's first start with making the distinction between Javascript in a web browser, and Javascript on a server (CommonJS and Node).

Javascript is a language traditionally confined to a web browser with a limited global context defined mostly by what came to be known as the Document Object Model (DOM) level 0 (the Netscape Navigator Javascript API).

Server-side Javascript eliminates that restriction and allows Javascript to call into various pieces of native code (like the Postgres library) and open sockets.

Now require() is a special function call defined as part of the CommonJS spec. In node, it resolves libraries and modules in the Node search path, now usually defined as node_modules in the same directory (or the directory of the invoked javascript file) or the system-wide search path.

To try to answer the rest of your question, we need to use a proxy between the code running in the the browser and the database server.

Since we are discussing Node and you are already familiar with how to run a query from there, it would make sense to use Node as that proxy.

As a simple example, we're going to make a URL that returns a few facts about a Beatle, given a name, as JSON.

/* your connection code */

var express = require('express');
var app = express.createServer();
app.get('/beatles/:name', function(req, res) {
    var name = req.params.name || '';
    name = name.replace(/[^a-zA_Z]/, '');
    if (!name.length) {
        res.send({});
    } else {
        var query = client.query('SELECT * FROM BEATLES WHERE name =\''+name+'\' LIMIT 1');
        var data = {};
        query.on('row', function(row) {
            data = row;
            res.send(data);
        });
    };
});
app.listen(80, '127.0.0.1');

The features available to use are dependent on your processor. Apple uses the same Intel stuff as everybody else. So yes, generic x86 should be fine (assuming you're not on a PPC :D).

As far as tools go, I think your best bet is a good text editor that 'understands' assembly.

For replace you can use vbCrLf:

Replace(string, vbCrLf, "")

You can also use chr(13)+chr(10).

I seem to remember in some odd cases that chr(10) comes before chr(13).

Detect the browser and use Data-URI for Chrome and use PDF.js as below for other browsers.

PDFJS.getDocument(url_of_pdf)
.then(function(pdf) {
    return pdf.getPage(1);
})
.then(function(page) {
    // get a viewport
    var scale = 1.5;
    var viewport = page.getViewport(scale);
    // get or create a canvas
    var canvas = ...;
    canvas.width = viewport.width;
    canvas.height = viewport.height;

    // render a page
    page.render({
        canvasContext: canvas.getContext('2d'),
        viewport: viewport
    });
})
.catch(function(err) {
    // deal with errors here!
});

I think you can normalize the row elements sum to 1 by this: new_matrix = a / a.sum(axis=1, keepdims=1). And the column normalization can be done with new_matrix = a / a.sum(axis=0, keepdims=1). Hope this can hep.

In my case, I was exporting a Class and an Enum from the same component file:

mComponent.component.ts:

export class MyComponentClass{...}
export enum MyEnum{...}

Then, I was trying to use MyEnum from a child of MyComponentClass. That was causing the Can't resolve all parameters error.

By moving MyEnum in a separate folder from MyComponentClass, that solved my issue!

As Günter Zöchbauer mentioned, this is happening because of a service or component is circularly dependent.

It's caused by n % x where x = 0 in the first loop iteration. You can't calculate a modulus with respect to 0.

I have used both timers and Thread.Sleep(x), or either, depending on the situation.

If I have a short piece of code that needs to run repeadedly, I probably use a timer.

If I have a piece of code that might take longer to run than the delay timer (such as retrieving files from a remote server via FTP, where I don't control or know the network delay or file sizes / count), I will wait for a fixed period of time between cycles.

Both are valid, but as pointed out earlier they do different things. The timer runs your code every x milliseconds, even if the previous instance hasn't finished. The Thread.Sleep(x) waits for a period of time after completing each iteration, so the total delay per loop will always be longer (perhaps not by much) than the sleep period.

Because none mentioned, when using Number and parseInt with numeric separator, they also behave differently:

const num1 = 5_0; // 50
const num2 = Number(5_0); // 50
const num3 = Number("5_0"); // NaN
const num4 = parseInt(5_0); // 50
const num5 = parseInt("5_0"); // 5

As a fallback solution, you could wrap your classes in a parent element like this:

<div>
    <div>This text should appear as normal</div>
    <p>This text should be blue.</p>
    <div>
        <!-- first-child / first-of-type starts from here -->
        <p class="myclass1">This text should appear red.</p>
        <p class="myclass2">This text should appear green.</p>
    </div>
</div>

For what it's worth, I voted for the answer that was picked, but wanted to share a solution. The downside is, it's Linux only - I spent about 5 minutes trying to find the OSX equivalent before coming to Stack overflow. I'm sure it's out there though.

On Linux you can use readlink -e in tandem with dirname.

$(dirname $(readlink -e ../../../../etc/passwd))

yields

/etc/

And then you use dirname's sister, basename to just get the filename

$(basename ../../../../../passwd)

yields

passwd

Put it all together..

F=../../../../../etc/passwd
echo "$(dirname $(readlink -e $F))/$(basename $F)"

yields

/etc/passwd

You're safe if you're targeting a directory, basename will return nothing and you'll just end up with double slashes in the final output.

It's 2021... keep it simple.

Times have changed and now the cleanest and most readable way to do this is:

Array.from(document.querySelectorAll('widget hover')).forEach((el) => el.classList.remove('hover'));

If you can't support arrow functions then just convert it like this:

Array.from(document.querySelectorAll('widget hover')).forEach(function(el) { 
    el.classList.remove('hover');
});

Additionally if you need to support extremely old browsers then use a polyfil for the forEach and Array.from and move on with your life.

Very simple -

npm config set registry https://path-to-your-registry/

It actually sets registry = "https://path-to-your-registry" this line to /Users/<ur-machine-user-name>/.npmrc

All the value you have set explicitly or have been set by default can be seen by - npm config list

ALTER TABLE myTable ALTER COLUMN myColumn {DataType} NULL

where {DataType} is the current data type of that column (For example int or varchar(10))

If you want to obtain a stand-alone binary application in Python try to use a tool like py2exe or PyInstaller.

[Quick Answer]

There are many alternatives, and my favourites are:

- Alternative 1:

git fetch --all
git checkout YourBranch

Using this alternative using a branch that exist remotely, but not in your local.

- Alternative 2:

git checkout -b 'YourBranch' origin/'YourRemote'

Probably, this is the simplest way.

Procedure to auto fix AUTO_INCREMENT value of table

DROP PROCEDURE IF EXISTS update_auto_increment;
DELIMITER //
CREATE PROCEDURE update_auto_increment (_table VARCHAR(64))
BEGIN
    DECLARE _max_stmt VARCHAR(1024);
    DECLARE _stmt VARCHAR(1024);    
    SET @inc := 0;

    SET @MAX_SQL := CONCAT('SELECT IFNULL(MAX(`id`), 0) + 1 INTO @inc FROM ', _table);
    PREPARE _max_stmt FROM @MAX_SQL;
    EXECUTE _max_stmt;
    DEALLOCATE PREPARE _max_stmt;

    SET @SQL := CONCAT('ALTER TABLE ', _table, ' AUTO_INCREMENT =  ', @inc);
    PREPARE _stmt FROM @SQL;
    EXECUTE _stmt;
    DEALLOCATE PREPARE _stmt;
END//
DELIMITER ;

CALL update_auto_increment('your_table_name')

Here's the LLVM header.

// -*- C++ -*-
//===--------------------------- __nullptr --------------------------------===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//

#ifndef _LIBCPP_NULLPTR
#define _LIBCPP_NULLPTR

#include <__config>

#if !defined(_LIBCPP_HAS_NO_PRAGMA_SYSTEM_HEADER)
#pragma GCC system_header
#endif

#ifdef _LIBCPP_HAS_NO_NULLPTR

_LIBCPP_BEGIN_NAMESPACE_STD

struct _LIBCPP_TEMPLATE_VIS nullptr_t
{
    void* __lx;

    struct __nat {int __for_bool_;};

    _LIBCPP_INLINE_VISIBILITY _LIBCPP_CONSTEXPR nullptr_t() : __lx(0) {}
    _LIBCPP_INLINE_VISIBILITY _LIBCPP_CONSTEXPR nullptr_t(int __nat::*) : __lx(0) {}

    _LIBCPP_INLINE_VISIBILITY _LIBCPP_CONSTEXPR operator int __nat::*() const {return 0;}

    template <class _Tp>
        _LIBCPP_INLINE_VISIBILITY _LIBCPP_CONSTEXPR
        operator _Tp* () const {return 0;}

    template <class _Tp, class _Up>
        _LIBCPP_INLINE_VISIBILITY
        operator _Tp _Up::* () const {return 0;}

    friend _LIBCPP_INLINE_VISIBILITY _LIBCPP_CONSTEXPR bool operator==(nullptr_t, nullptr_t) {return true;}
    friend _LIBCPP_INLINE_VISIBILITY _LIBCPP_CONSTEXPR bool operator!=(nullptr_t, nullptr_t) {return false;}
};

inline _LIBCPP_INLINE_VISIBILITY _LIBCPP_CONSTEXPR nullptr_t __get_nullptr_t() {return nullptr_t(0);}

#define nullptr _VSTD::__get_nullptr_t()

_LIBCPP_END_NAMESPACE_STD

#else  // _LIBCPP_HAS_NO_NULLPTR

namespace std
{
    typedef decltype(nullptr) nullptr_t;
}

#endif  // _LIBCPP_HAS_NO_NULLPTR

#endif  // _LIBCPP_NULLPTR

(a great deal can be uncovered with a quick grep -r /usr/include/*`)

One thing that jumps out is the operator * overload (returning 0 is a lot friendlier than segfaulting...). Another thing is it doesn't look compatible with storing an address at all. Which, compared to how it goes slinging void*'s and passing NULL results to normal pointers as sentinel values, would obviously reduce the "never forget, it might be a bomb" factor.

in 1.x there used to be things DataTables couldn't do which DataSets could (don't remember exactly what). All that was changed in 2.x. My guess is that's why a lot of examples still use DataSets. DataTables should be quicker as they are more lightweight. If you're only pulling a single resultset, its your best choice between the two.

I think you can achieve it by using the below code

Model::get(['ColumnName'])->toArray();

Use the method setAnimation(null) to stop an animation, it exposed as public method in View.java, it is the base class for all widgets, which are used to create interactive UI components (buttons, text fields, etc.). /** * Sets the next animation to play for this view. * If you want the animation to play immediately, use * {@link #startAnimation(android.view.animation.Animation)} instead. * This method provides allows fine-grained * control over the start time and invalidation, but you * must make sure that 1) the animation has a start time set, and * 2) the view's parent (which controls animations on its children) * will be invalidated when the animation is supposed to * start. * * @param animation The next animation, or null. */ public void setAnimation(Animation animation)

Pretty old question but the most simple answer isn't yet posted.
Here it is :
1) In [workspace]\.metadata\.plugins\org.eclipse.e4.workbench delete workbench.xmi file.
In most cases it's enough - try to load Eclipse.
Still you have to re-configure your specific perspective settings (if any)

2) Now getting problems with building projects that worked perfectly? As of my experience following steps help:
- uncheck Projects->Build automatically
- switch to Java perspective (if not yet): Window -> Open perspective -> Java
- locate Problems view or open it: Window -> Show view -> Problems
- right-click on problem groups and select Delete. Be sure to delete Lint errors
- clean the workspace: Project -> Clean... with option Clean all projects
- check Projects->Build automatically
- if problems persist for some projects: right-click project, select Properties -> Android and make sure appropriate Project Build Target is chosen

3) It was always sufficient for me. But if you still get problems - try @george post recommendations

Options:

• Use data.Seek as suggested by ken2k

• Use the somewhat simpler Position property:

  data.Position = 0;
  

• Use the ToArray call in MemoryStream to make your life simpler to start with:

  byte[] buf = data.ToArray();
  

The third option would be my preferred approach.

Note that you should have a using statement to close the file stream automatically (and optionally for the MemoryStream), and I'd add a using directive for System.IO to make your code cleaner:

byte[] buf;
using (MemoryStream data = new MemoryStream())
{
    using (Stream file = TestStream())
    {
        file.CopyTo(data);
        buf = data.ToArray();
    }
}

// Use buf

You might also want to create an extension method on Stream to do this for you in one place, e.g.

public static byte[] CopyToArray(this Stream input)
{
    using (MemoryStream memoryStream = new MemoryStream())
    {
        input.CopyTo(memoryStream);
        return memoryStream.ToArray();
    }
}

Note that this doesn't close the input stream.

In addition to the differences mentioned in other answers, there also is a speed difference. d = {} is over twice as fast:

python -m timeit -s "d = {}" "for i in xrange(500000): d.clear()"
10 loops, best of 3: 127 msec per loop

python -m timeit -s "d = {}" "for i in xrange(500000): d = {}"
10 loops, best of 3: 53.6 msec per loop

Most of the time you need this type of check for database usage, like checking if string valid userId. Bacause of that there can't be any strange symbols that can be parced as integer. Also integer should be in database range of integer. You just need normal int like 1,2,3 and so on.

const isStrNormPosInt = (str: string) => {
  return /^([1-9]\d*)$/.test(str) && Number(str) <= 2147483647 // postgres max int
}

If check is passed, you can just convert it to number Number(str)

C# 6.0 adds readonly auto properties

public object MyProperty { get; }

So when you don't need to support older compilers you can have a truly readonly property with code that's just as concise as a readonly field.

Versioning:
I think it doesn't make much difference if you are only interested in source compatibility.
Using a property is better for binary compatibility since you can replace it by a property which has a setter without breaking compiled code depending on your library.

Convention:
You are following the convention. In cases like this where the differences between the two possibilities are relatively minor following the convention is better. One case where it might come back to bite you is reflection based code. It might only accept properties and not fields, for example a property editor/viewer.

Serialization
Changing from field to property will probably break a lot of serializers. And AFAIK XmlSerializer does only serialize public properties and not public fields.

Using an Autoproperty
Another common Variation is using an autoproperty with a private setter. While this is short and a property it doesn't enforce the readonlyness. So I prefer the other ones.

Readonly field is selfdocumenting
There is one advantage of the field though:
It makes it clear at a glance at the public interface that it's actually immutable (barring reflection). Whereas in case of a property you can only see that you cannot change it, so you'd have to refer to the documentation or implementation.

But to be honest I use the first one quite often in application code since I'm lazy. In libraries I'm typically more thorough and follow the convention.

This solution preserves the index of the df2 DataFrame, unlike any solution that uses tolist():

df3 = df2.teams.apply(pd.Series)
df3.columns = ['team1', 'team2']

Here's the result:

  team1 team2
0    SF   NYG
1    SF   NYG
2    SF   NYG
3    SF   NYG
4    SF   NYG
5    SF   NYG
6    SF   NYG

Use the following method in the table view delegate's didSelectRowAtIndexpath (Or from anywhere)

[myTable deselectRowAtIndexPath:[myTable indexPathForSelectedRow] animated:YES];

android.provider.telephony.SMS_RECEIVED is not correct because Telephony is a class and it should be capital as in android.provider.Telephony.SMS_RECEIVED

I know it's "a bit late" but just in case if anybody needs to do this in LINQ Method syntax (which is why I found this post initially), this would be how to do that:

var results = context.Periods
    .GroupJoin(
        context.Facts,
        period => period.id,
        fk => fk.periodid,
        (period, fact) => fact.Where(f => f.otherid == 17)
                              .Select(fact.Value)
                              .DefaultIfEmpty()
    )
    .Where(period.companyid==100)
    .SelectMany(fact=>fact).ToList();

if (document.getElementsByTagName) {
    var inputElements = document.getElementsByTagName("input");
    for (i=0; inputElements[i]; i++) {
        if (inputElements[i].className && (inputElements[i].className.indexOf("disableAutoComplete") != -1)) {
            inputElements[i].setAttribute("autocomplete","off");
        }
    }
}

Try this

If @NewStatus  = 'InOffice' 
BEGIN
     Update tblEmployee set InOffice = -1 where EmpID = @EmpID
END
Else If @NewStatus  = 'OutOffice'
BEGIN
    Update tblEmployee set InOffice = -1 where EmpID = @EmpID
END
Else If @NewStatus  = 'Home'
BEGIN
    Update tblEmployee set Home = -1 where EmpID = @EmpID
END

Just use the apache commons codec library. They have a utility class called DigestUtils

No need to get into details.

If you don't need atomicity you can use os module:

import os

if not os.path.exists('/tmp/test'):
    os.mknod('/tmp/test')

UPDATE:

As Cory Klein mentioned, on Mac OS for using os.mknod() you need a root permissions, so if you are Mac OS user, you may use open() instead of os.mknod()

import os

if not os.path.exists('/tmp/test'):
    with open('/tmp/test', 'w'): pass

Place your widget.js after core.js, but before any other jquery that calls the widget.js file. (Example: draggable.js) Precedence (order) matters in what javascript/jquery can 'see'. Always position helper code before the code that uses the helper code.

in laravel 5.4 this code Model::whereNotNull('column') was not working you need to add get() like this one Model::whereNotNull('column')->get(); this one works fine for me.

Just to say 16.04, I'm running

sudo apt-get install lib32z1 lib32ncurses5 libbz2-1.0:i386 lib32stdc++6

seems to work on a vanilla install after installing oracle-jdk-8

I searched for multiple options to get my git reset to specific commit, but most of them aren't so satisfactory.

I generally use this to reset the git to the specific commit in source tree.

1. select commit to reset on sourcetree.

2. In dropdowns select the active branch , first Parent Only

3. And right click on "Reset branch to this commit" and select hard reset option (soft, mixed and hard)

4. and then go to terminal git push -f

You should be all set!

Kind of, use the XmlAttribute instead of XmlElement, but it won't look like what you want. It will look like the following:

<SomeModel SomeStringElementName="testData"> 
</SomeModel> 

The only way I can think of to achieve what you want (natively) would be to have properties pointing to objects named SomeStringElementName and SomeInfoElementName where the class contained a single getter named "value". You could take this one step further and use DataContractSerializer so that the wrapper classes can be private. XmlSerializer won't read private properties.

// TODO: make the class generic so that an int or string can be used.
[Serializable]  
public class SerializationClass
{
    public SerializationClass(string value)
    {
        this.Value = value;
    }

    [XmlAttribute("value")]
    public string Value { get; }
}


[Serializable]                     
public class SomeModel                     
{                     
    [XmlIgnore]                     
    public string SomeString { get; set; }                     

    [XmlIgnore]                      
    public int SomeInfo { get; set; }  

    [XmlElement]
    public SerializationClass SomeStringElementName
    {
        get { return new SerializationClass(this.SomeString); }
    }               
}

Write a simple class that subcalsses HttpServletRequestWrapper with a getParameter() method that returns the sanitized version of the input. Then pass an instance of your HttpServletRequestWrapper to Filter.doChain() instead of the request object directly.

WITH TEMP (DIA, SIGUIENTE_DIA ) AS
           (SELECT 
               1, 
               CAST(@FECHAINI AS DATE)
            FROM 
               DUAL
           UNION ALL
            SELECT 
               DIA, 
               DATEADD(DAY, DIA, SIGUIENTE_DIA)
            FROM 
               TEMP
            WHERE
               DIA < DATEDIFF(DAY,  @FECHAINI, @FECHAFIN)   
               AND DATEADD(DAY, 1, SIGUIENTE_DIA) <=  CAST(@FECHAFIN AS DATE)
           )
           SELECT 
              SIGUIENTE_DIA AS CALENDARIO 
           FROM
              TEMP
           ORDER BY   
              SIGUIENTE_DIA

The detail is on the table DUAL but if your exchange this table for a dummy table this works.

You could also use...

$hostname = getenv('HTTP_HOST');

If you are on either Eclipse or Spring tool suite then follow the below steps.

(1) Go to 'Window' on the top of the editor. Click on it
(2) Select show view. You should see an option 'Project Explorer'. Click on it.
You should be able to do it.

You can use Newtonsoft.Json just add Newtonsoft.dll to your project and use below script

using System;
using Newtonsoft.Json;
using UnityEngine;

public class NewBehaviourScript : MonoBehaviour
{

    [Serializable]
    public class Person
    {
        public string id;
        public string name;
    }
    public Person[] person;

    private void Start()
    {
       var myjson = JsonConvert.SerializeObject(person);

        print(myjson);

    }
}

another solution is using JsonHelper

using System;
using Newtonsoft.Json;
using UnityEngine;

public class NewBehaviourScript : MonoBehaviour
{

    [Serializable]
    public class Person
    {
        public string id;
        public string name;
    }
    public Person[] person;

    private void Start()
    {
        var myjson = JsonHelper.ToJson(person);

        print(myjson);

    }
}

Here are several options for getting the "tail" items of an iterable:

Given

n = 9
iterable = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10]

Desired Output

[2, 3, 4, 5, 6, 7, 8, 9, 10]

Code

We get the latter output using any of the following options:

from collections import deque
import itertools

import more_itertools


# A: Slicing
iterable[-n:]


# B: Implement an itertools recipe
def tail(n, iterable):
    """Return an iterator over the last *n* items of *iterable*.

        >>> t = tail(3, 'ABCDEFG')
        >>> list(t)
        ['E', 'F', 'G']

    """
    return iter(deque(iterable, maxlen=n))
list(tail(n, iterable))


# C: Use an implemented recipe, via more_itertools
list(more_itertools.tail(n, iterable))


# D: islice, via itertools
list(itertools.islice(iterable, len(iterable)-n, None))


# E: Negative islice, via more_itertools
list(more_itertools.islice_extended(iterable, -n, None))

Details

• A. Traditional Python slicing is inherent to the language. This option works with sequences such as strings, lists and tuples. However, this kind of slicing does not work on iterators, e.g. iter(iterable).
• B. An itertools recipe. It is generalized to work on any iterable and resolves the iterator issue in the last solution. This recipe must be implemented manually as it is not officially included in the itertools module.
• C. Many recipes, including the latter tool (B), have been conveniently implemented in third party packages. Installing and importing these these libraries obviates manual implementation. One of these libraries is called more_itertools (install via > pip install more-itertools); see more_itertools.tail.
• D. A member of the itertools library. Note, itertools.islice does not support negative slicing.
• E. Another tool is implemented in more_itertools that generalizes itertools.islice to support negative slicing; see more_itertools.islice_extended.

Which one do I use?

It depends. In most cases, slicing (option A, as mentioned in other answers) is most simple option as it built into the language and supports most iterable types. For more general iterators, use any of the remaining options. Note, options C and E require installing a third-party library, which some users may find useful.

printf("%.*s\n",n,(char *) memset(buffer,c,n));

n <= sizeof(buffer) [ maybe also n < 2^16]

However the optimizer may change it to puts(buffer) and then the lack of EoS will .....

And the assumption is that memset is an assembler instruction (but still a loop be it on chip).

Strictly seen there is no solution given you precondition 'No loop'.

Css workaround for forcing columns to display correctly with a 'block' tbody

This solution still requires the th widths to be calculated and set by jQuery

table.scroll tbody,
table.scroll thead { display: block; }

table.scroll tbody {
    overflow-y: auto;
    overflow-x: hidden;
    max-height: 300px;
}

table.scroll tr {
    display: flex;
}

table.scroll tr > td {
    flex-grow: 1;
    flex-basis: 0;
}

And the Jquery / Javascript

var $table = $('#the_table_element'),
    $bodyCells = $table.find('tbody tr:first').children(),
    colWidth;

$table.addClass('scroll');

// Adjust the width of thead cells when window resizes
$(window).resize(function () {

    // Get the tbody columns width array
    colWidth = $bodyCells.map(function () {
        return $(this).width();
    }).get();

    // Set the width of thead columns
    $table.find('thead tr').children().each(function (i, v) {
        $(v).width(colWidth[i]);
    });

}).resize(); // Trigger resize handler

Description

There are many ways to validate your TextBox. You can do this on every keystroke, at a later time, or on the Validating event.

The Validating event gets fired if your TextBox looses focus. When the user clicks on a other Control, for example. If your set e.Cancel = true the TextBox doesn't lose the focus.

MSDN - Control.Validating Event When you change the focus by using the keyboard (TAB, SHIFT+TAB, and so on), by calling the Select or SelectNextControl methods, or by setting the ContainerControl.ActiveControl property to the current form, focus events occur in the following order

Enter

GotFocus

Leave

Validating

Validated

LostFocus

When you change the focus by using the mouse or by calling the Focus method, focus events occur in the following order:

Enter

GotFocus

LostFocus

Leave

Validating

Validated

Sample Validating Event

private void textBox1_Validating(object sender, CancelEventArgs e)
{
    if (textBox1.Text != "something")
        e.Cancel = true;
}

Update

You can use the ErrorProvider to visualize that your TextBox is not valid. Check out Using Error Provider Control in Windows Forms and C#

More Information

• MSDN - Control.Validating Event
• MSDN - ErrorProvider Component (Windows Forms)
• Using Error Provider Control in Windows Forms and C#

If you already installed "MongoDB", if you accidentally exit from the MongoDB server, then "restart your system".

This method solved me...

[On Windows only]

And also another method is there:

press:

Windows + R

type:

services.msc

and click "ok", it opens "services" window, and then search for "MongoDB Server" in the list. After you find "MongoDB Server", right-click and choose "start" from the pop-up menu.

The MongoDb Server will start running.

Hope it works!!

In a special case within ASP.NET If you want to know if the page is redirected by a specified .aspx page and not another one, just put the information in a session name and take necessary action in the receiving Page_Load Event.

encodeURIComponent()

Converts the input into a URL-encoded string

encodeURI()

URL-encodes the input, but assumes a full URL is given, so returns a valid URL by not encoding the protocol (e.g. http://) and host name (e.g. www.stackoverflow.com).

decodeURIComponent() and decodeURI() are the opposite of the above

This would be the Unicode solution

String s = "A função, Ãugent";
String r = s.replaceAll("\\P{InBasic_Latin}", "");

\p{InBasic_Latin} is the Unicode block that contains all letters in the Unicode range U+0000..U+007F (see regular-expression.info)

\P{InBasic_Latin} is the negated \p{InBasic_Latin}

TL;DR: add the parameter cursorclass=MySQLdb.cursors.DictCursor at the end of your MySQLdb.connect.

I had a working code and the DB moved, I had to change the host/user/pass. After this change, my code stopped working and I started getting this error. Upon closer inspection, I copy-pasted the connection string on a place that had an extra directive. The old code read like:

 conn = MySQLdb.connect(host="oldhost",
                        user="olduser",
                        passwd="oldpass",
                        db="olddb", 
                        cursorclass=MySQLdb.cursors.DictCursor)

Which was replaced by:

 conn = MySQLdb.connect(host="newhost",
                        user="newuser",
                        passwd="newpass",
                        db="newdb")

The parameter cursorclass=MySQLdb.cursors.DictCursor at the end was making python allow me to access the rows using the column names as index. But the poor copy-paste eliminated that, yielding the error.

So, as an alternative to the solutions already presented, you can also add this parameter and access the rows in the way you originally wanted. ^_^ I hope this helps others.

public static class SqlParameterExtensions
{
    public static T GetValueOrDefault<T>(this SqlParameter sqlParameter)
    {
        if (sqlParameter.Value == DBNull.Value 
            || sqlParameter.Value == null)
        {
            if (typeof(T).IsValueType)
                return (T)Activator.CreateInstance(typeof(T));

            return (default(T));
        }

        return (T)sqlParameter.Value;
    }
}


// Usage
using (SqlConnection conn = new SqlConnection(connectionString))
using (SqlCommand cmd = new SqlCommand("storedProcedure", conn))
{
   SqlParameter outputIdParam = new SqlParameter("@ID", SqlDbType.Int)
   { 
      Direction = ParameterDirection.Output 
   };

   cmd.CommandType = CommandType.StoredProcedure;
   cmd.Parameters.Add(outputIdParam);

   conn.Open();
   cmd.ExecuteNonQuery();

   int result = outputIdParam.GetValueOrDefault<int>();
}

It reads the existing .config file that was used for an old kernel and prompts the user for options in the current kernel source that are not found in the file. This is useful when taking an existing configuration and moving it to a new kernel.

While the answer given by Paul H shows the essential part, it is not a complete example. On the other hand the matplotlib example seems rather complicated and does not show how to use days.

So for everyone in need here is a full working example:

from datetime import datetime
import matplotlib.pyplot as plt
from matplotlib.dates import DateFormatter

myDates = [datetime(2012,1,i+3) for i in range(10)]
myValues = [5,6,4,3,7,8,1,2,5,4]
fig, ax = plt.subplots()
ax.plot(myDates,myValues)

myFmt = DateFormatter("%d")
ax.xaxis.set_major_formatter(myFmt)

## Rotate date labels automatically
fig.autofmt_xdate()
plt.show()

in bootstrap use .list-inline css class

<ul class="list-inline">
    <li>Coffee</li>
    <li>Tea</li>
    <li>Milk</li>
</ul>

Ref: https://www.w3schools.com/bootstrap/tryit.asp?filename=trybs_ref_txt_list-inline&stacked=h

If you migrated to AndroidX you should add the dependency in graddle like this:

com.google.android.material:material:1.0.0-rc01

<asp:GridView ID="GridView1" AutoGenerateEditButton="True" 
ondatabound="gv_DataBound" runat="server" DataSourceID="SqlDataSource1"
AutoGenerateColumns="False" width="600px">

<Columns>
                <asp:BoundField HeaderText="UserId" 
                DataField="UserId" 
                SortExpression="UserId" ItemStyle-Width="400px"></asp:BoundField>
   </Columns>
</asp:GridView>

Below is another way by which we can JSON data with JSON.stringify() function

var Utils = {};
Utils.MyClass1 = function (id, member) {
    this.id = id;
    this.member = member;
}
var myobject = { MyClass1: new Utils.MyClass1("5678999", "text") };
alert(JSON.stringify(myobject));

You don't have to do anything difficult!

Facebook ? Settings ? Basic:
write "localhost" in the "App Domains" field then click on "+Add Platform" choose "Web Site".

After that, in the "Site Url" field write your localhost url
(e.g.: http://localhost:1337/something).

This will allow you to test your facebook plugins locally.

Try this code:

import java.util.Scanner;

public class BasicElement {
    public static void main(String[] args){
        Scanner input = new Scanner(System.in);
        int hours;
        System.out.print("Enter the hours to convert:");
        hours =input.nextInt();
        int d=hours/24;
        int m=hours%24;
        System.out.println(d+"days"+" "+m+"hours");     

    }
}

What you should be looking at is Import-Csv

Once you import the CSV you can use the column header as the variable.

Example CSV:

Name  | Phone Number | Email
Elvis | 867.5309     | [email protected]
Sammy | 555.1234     | [email protected]

Now we will import the CSV, and loop through the list to add to an array. We can then compare the value input to the array:

$Name = @()
$Phone = @()

Import-Csv H:\Programs\scripts\SomeText.csv |`
    ForEach-Object {
        $Name += $_.Name
        $Phone += $_."Phone Number"
    }

$inputNumber = Read-Host -Prompt "Phone Number"

if ($Phone -contains $inputNumber)
    {
    Write-Host "Customer Exists!"
    $Where = [array]::IndexOf($Phone, $inputNumber)
    Write-Host "Customer Name: " $Name[$Where]
    }

And here is the output:

The Problem

In MySQL, certain words like SELECT, INSERT, DELETE etc. are reserved words. Since they have a special meaning, MySQL treats it as a syntax error whenever you use them as a table name, column name, or other kind of identifier - unless you surround the identifier with backticks.

As noted in the official docs, in section 10.2 Schema Object Names (emphasis added):

Certain objects within MySQL, including database, table, index, column, alias, view, stored procedure, partition, tablespace, and other object names are known as identifiers.

...

If an identifier contains special characters or is a reserved word, you must quote it whenever you refer to it.

...

The identifier quote character is the backtick ("`"):

A complete list of keywords and reserved words can be found in section 10.3 Keywords and Reserved Words. In that page, words followed by "(R)" are reserved words. Some reserved words are listed below, including many that tend to cause this issue.

• ADD
• AND
• BEFORE
• BY
• CALL
• CASE
• CONDITION
• DELETE
• DESC
• DESCRIBE
• FROM
• GROUP
• IN
• INDEX
• INSERT
• INTERVAL
• IS
• KEY
• LIKE
• LIMIT
• LONG
• MATCH
• NOT
• OPTION
• OR
• ORDER
• PARTITION
• RANK
• REFERENCES
• SELECT
• TABLE
• TO
• UPDATE
• WHERE

The Solution

You have two options.

1. Don't use reserved words as identifiers

The simplest solution is simply to avoid using reserved words as identifiers. You can probably find another reasonable name for your column that is not a reserved word.

Doing this has a couple of advantages:

• It eliminates the possibility that you or another developer using your database will accidentally write a syntax error due to forgetting - or not knowing - that a particular identifier is a reserved word. There are many reserved words in MySQL and most developers are unlikely to know all of them. By not using these words in the first place, you avoid leaving traps for yourself or future developers.

• The means of quoting identifiers differs between SQL dialects. While MySQL uses backticks for quoting identifiers by default, ANSI-compliant SQL (and indeed MySQL in ANSI SQL mode, as noted here) uses double quotes for quoting identifiers. As such, queries that quote identifiers with backticks are less easily portable to other SQL dialects.

Purely for the sake of reducing the risk of future mistakes, this is usually a wiser course of action than backtick-quoting the identifier.

2. Use backticks

If renaming the table or column isn't possible, wrap the offending identifier in backticks (`) as described in the earlier quote from 10.2 Schema Object Names.

An example to demonstrate the usage (taken from 10.3 Keywords and Reserved Words):

mysql> CREATE TABLE interval (begin INT, end INT);
ERROR 1064 (42000): You have an error in your SQL syntax.
near 'interval (begin INT, end INT)'
mysql> CREATE TABLE `interval` (begin INT, end INT);
Query OK, 0 rows affected (0.01 sec)

Similarly, the query from the question can be fixed by wrapping the keyword key in backticks, as shown below:

INSERT INTO user_details (username, location, `key`)
VALUES ('Tim', 'Florida', 42)";               ^   ^

As per documentation:

MySQL Docs

• The SELECT statement cannot contain a subquery in the FROM clause.

Your workaround would be to create a view for each of your subqueries.

Then access those views from within your view view_credit_status

As i understood, your Project shows no errors, because you included the Jar. But the Jar won't be used, when your Project got "exported" to the device. Try this

Project -> Properties

Java Build Path / Order and Export

[?] Your Jar

re.match attempts to match a pattern at the beginning of the string. re.search attempts to match the pattern throughout the string until it finds a match.

The __init__ function is setting up all the member variables in the class. So once your bicluster is created you can access the member and get a value back:

mycluster = bicluster(...actual values go here...)
mycluster.left # returns the value passed in as 'left'

Check out the Python Docs for some info. You'll want to pick up an book on OO concepts to continue learning.

printStackTrace() prints to a console. In production settings, nobody is ever watching at that. Suraj is correct, should pass this information to a logger.

When you have 'NA' values in the column, then

sum(as.numeric(JuneData1$Account.Balance), na.rm = TRUE)

>>> mask = df['ids'].str.contains('ball')    
>>> mask
0     True
1     True
2    False
3     True
Name: ids, dtype: bool

>>> df[mask]
     ids  vals
0  aball     1
1  bball     2
3  fball     4

When this error occured I first clicked retry for few times and waited for 2 minutes and clicked 'retry' then it installed without any error.(for 2 minutes I was searching to solve this problem online).

Is there a way ( I mean how do I ) set a system property in a maven project? I want to access a property from my test [...]

You can set system properties in the Maven Surefire Plugin configuration (this makes sense since tests are forked by default). From Using System Properties:

<project>
  [...]
  <build>
    <plugins>
      <plugin>
        <groupId>org.apache.maven.plugins</groupId>
        <artifactId>maven-surefire-plugin</artifactId>
        <version>2.5</version>
        <configuration>
          <systemPropertyVariables>
            <propertyName>propertyValue</propertyName>
            <buildDirectory>${project.build.directory}</buildDirectory>
            [...]
          </systemPropertyVariables>
        </configuration>
      </plugin>
    </plugins>
  </build>
  [...]
</project>

and my webapp ( running locally )

Not sure what you mean here but I'll assume the webapp container is started by Maven. You can pass system properties on the command line using:

mvn -DargLine="-DpropertyName=propertyValue"

Update: Ok, got it now. For Jetty, you should also be able to set system properties in the Maven Jetty Plugin configuration. From Setting System Properties:

<project>
  ...
  <plugins>
    ...
      <plugin>
        <groupId>org.mortbay.jetty</groupId>
        <artifactId>maven-jetty-plugin</artifactId>
        <configuration>
         ...
         <systemProperties>
            <systemProperty>
              <name>propertyName</name>
              <value>propertyValue</value>
            </systemProperty>
            ...
         </systemProperties>
        </configuration>
      </plugin>
  </plugins>
</project>

A late answer, although I thought of giving an in-depth answer to this question. This method is suitable for Android Studio 1.0.0 and above.

STEPS

1. First switch your folder structure from Android to Project.

2. Now search for the libs folder inside the app folder.

3. Once you have pasted the .jar file inside libs folder. Right click on the jar file and at end click on Add as library. This will take care of adding compile files('libs/library_name.jar') in build.gradle [You don't have to manually enter this in your build file].

Now you can start using the library in your project.

use this code to change password to text and vice versa

mCbShowPwd.setOnCheckedChangeListener(new OnCheckedChangeListener() {

            public void onCheckedChanged(CompoundButton buttonView, boolean isChecked) {
                // checkbox status is changed from uncheck to checked.
                if (!isChecked) {
                        // hide password
                    mEtPwd.setTransformationMethod(PasswordTransformationMethod.getInstance());
                } else {
                        // show password
                    mEtPwd.setTransformationMethod(HideReturnsTransformationMethod.getInstance());
                }
            }
        });

for full sample code refer http://www.codeproject.com/Tips/518641/Show-hide-password-in-a-edit-text-view-password-ty

Why do you want a textarea to submit when you hit enter?

A "text" input will submit by default when you press enter. It is a single line input.

<input type="text" value="...">

A "textarea" will not, as it benefits from multi-line capabilities. Submitting on enter takes away some of this benefit.

<textarea name="area"></textarea>

You can add JavaScript code to detect the enter keypress and auto-submit, but you may be better off using a text input.

In our databases we use an enum that ensures we pass it either TRUE or FALSE. If you do it either of the first two ways it is too easy to either start adding new meaning to the integer without going through a proper design, or ending up with that char field having Y, y, N, n, T, t, F, f values and having to remember which section of code uses which table and which version of true it is using.

Couldn't find what I was looking for, then found it -

If you're using Node.js, there's a built-in utilpackage with a format function that works like this:

util.format("Hello my name is %s", "Brent");
> Hello my name is Brent

Coincidentally this is now built into console.log flavors too in Node.js -

console.log("This really bad error happened: %s", "ReferenceError");
> This really bad error happened: ReferenceError

Sibi Elangos's answer alone was not sufficient for me, so I had to:

• Right click on your ResourceFile
• Change the "Build Action" property
• Compile to "Embedded Resource"
• Build and deploy

This will generate an App_GlobalResources in your /bin folder, now copy that folder also to the root of the web application

Although this question is a bit dated. My quick and dirty solution would look like this:

$last_entry = Model::latest()->first();

But I guess it's vulnerable to race conditions on highly frequented databases.

I have just encounterred exactly the same problem and solved it. So hope to be helpful.

Suppose you are assemblling a release application package (.apk)

1. Check if your assets folder exist?: \android\app\src\main\assets If not, create one.

2. After executing "Assemble Release", check if there is anything in that folder(\android\app\src\main\assets) If not, find js bundle file(index.android.bundle), which should be in more than one of the following paths:

   *a)\android\app\build\intermediates\merged_assets\release\out\index.android.bundle

   b)\android\app\build\intermediates\merged_assets\release\mergeReleaseAssets\out\index.android.bundle

   c)\android\app\build\intermediates\assets\release\index.android.bundle

   d)\android\app\build\generated\assets\react\release\index.android.bundle*

A better way is to use "Everything" to search the file name: index.android.bundle.

3. Then copy this file into your assets folder(\android\app\src\main\assets\index.android.bundle)

4. Go back to powershell or command console, execute:

react-native run-android --variant=release

It should work.

Good luck!

An inline-block covers the whole line (from left to right), so a margin left and/or right won't work here. What you need is a block, a block has borders on the left and the right so can be influenced by margins.

This is how it works for me:

#content {
display: block;
margin: 0 auto;
}

First the bigint(20) not null auto_increment will not work, simply use bigserial primary key. Then datetime is timestamp in PostgreSQL. All in all:

CREATE TABLE article (
    article_id bigserial primary key,
    article_name varchar(20) NOT NULL,
    article_desc text NOT NULL,
    date_added timestamp default NULL
);

You can work around this by creating a separate VIEW for any subquery you want to use and then join to that in the VIEW you're creating. Here's an example: http://blog.gruffdavies.com/2015/01/25/a-neat-mysql-hack-to-create-a-view-with-subquery-in-the-from-clause/

This is quite handy as you'll very likely want to reuse it anyway and helps you keep your SQL DRY.

The following code send and recieve the current date and time from and to the server

//The following code is for the server application:

namespace Server
{
    class Program
    {
        const int PORT_NO = 5000;
        const string SERVER_IP = "127.0.0.1";

        static void Main(string[] args)
        {
            //---listen at the specified IP and port no.---
            IPAddress localAdd = IPAddress.Parse(SERVER_IP);
            TcpListener listener = new TcpListener(localAdd, PORT_NO);
            Console.WriteLine("Listening...");
            listener.Start();

            //---incoming client connected---
            TcpClient client = listener.AcceptTcpClient();

            //---get the incoming data through a network stream---
            NetworkStream nwStream = client.GetStream();
            byte[] buffer = new byte[client.ReceiveBufferSize];

            //---read incoming stream---
            int bytesRead = nwStream.Read(buffer, 0, client.ReceiveBufferSize);

            //---convert the data received into a string---
            string dataReceived = Encoding.ASCII.GetString(buffer, 0, bytesRead);
            Console.WriteLine("Received : " + dataReceived);

            //---write back the text to the client---
            Console.WriteLine("Sending back : " + dataReceived);
            nwStream.Write(buffer, 0, bytesRead);
            client.Close();
            listener.Stop();
            Console.ReadLine();
        }
    }
}

//this is the code for the client

namespace Client
{
    class Program
    {
        const int PORT_NO = 5000;
        const string SERVER_IP = "127.0.0.1";
        static void Main(string[] args)
        {
            //---data to send to the server---
            string textToSend = DateTime.Now.ToString();

            //---create a TCPClient object at the IP and port no.---
            TcpClient client = new TcpClient(SERVER_IP, PORT_NO);
            NetworkStream nwStream = client.GetStream();
            byte[] bytesToSend = ASCIIEncoding.ASCII.GetBytes(textToSend);

            //---send the text---
            Console.WriteLine("Sending : " + textToSend);
            nwStream.Write(bytesToSend, 0, bytesToSend.Length);

            //---read back the text---
            byte[] bytesToRead = new byte[client.ReceiveBufferSize];
            int bytesRead = nwStream.Read(bytesToRead, 0, client.ReceiveBufferSize);
            Console.WriteLine("Received : " + Encoding.ASCII.GetString(bytesToRead, 0, bytesRead));
            Console.ReadLine();
            client.Close();
        }
    }
}

JAR File Manifest Attributes for Security

The JAR file manifest contains information about the contents of the JAR file, including security and configuration information.

Add the attributes to the manifest before the JAR file is signed.
See Modifying a Manifest File in the Java Tutorial for information on adding attributes to the JAR manifest file.

Permissions Attribute

The Permissions attribute is used to verify that the permissions level requested by the RIA when it runs matches the permissions level that was set when the JAR file was created.

Use this attribute to help prevent someone from re-deploying an application that is signed with your certificate and running it at a different privilege level. Set this attribute to one of the following values:

• sandbox - runs in the security sandbox and does not require additional permissions.

• all-permissions - requires access to the user's system resources.

Changes to Security Slider:

The following changes to Security Slider were included in this release(7u51):

• Block Self-Signed and Unsigned applets on High Security Setting
• Require Permissions Attribute for High Security Setting
• Warn users of missing Permissions Attributes for Medium Security Setting

For more information, see Java Control Panel documentation.

sample MANIFEST.MF

Manifest-Version: 1.0
Ant-Version: Apache Ant 1.8.3
Created-By: 1.7.0_51-b13 (Oracle Corporation)
Trusted-Only: true
Class-Path: lib/plugin.jar
Permissions: sandbox
Codebase: http://myweb.de http://www.myweb.de
Application-Name: summary-applet

To upgrade any python package, use pip install <pkg_name> --upgrade.

So in your case it would be pip install tensorflow --upgrade. Just updated to 1.1.0

No one seems to be doing it like this:

createEventLinkButton.Attributes.Add("onClick", " if (this.innerHTML == 'Please Wait') { return false; } else {  this.innerHTML='Please Wait'; }");

This seems to be the only way that works.

for windows try left Ctrl key with F11 or F12 or Num off 7

I had to change both the httpd.conf and httpd-ssl.conf files DocumentRoot properties to get things like relative links (i.e. href="/index.html") and the favicon.ico link to work properly.

The latest Xampp control Panel makes this pretty easy.

From the control panel, there should be Apache in the first row. If it's started, stop it. Then click config and open the httpd.conf file and search for htdocs or documentRoot. Change the path to what you like. Do the same for httpd-ssl.conf. These should be the top 2 files in the list under Config's dropdown.

Then start the server again.

Hope this helps someone. Cheers.

Try this:

linearLayout.setVisibility(View.GONE);

Put double quotes around the path that has spaces like this:

REGSVR32 "E:\Documents and Settings\All Users\Application Data\xyz.dll"

It means that trackDAO should not be serialized.

When you are in android studio 3 or above you need to add following lines AndroidManifest.xml file

<activity
            android:name=".MainActivity"
            android:configChanges="orientation"
            android:screenOrientation= "sensorLandscape"
            tools:ignore="LockedOrientationActivity">

One thing this is sensor Landscape, means it will work on both landscape sides

But if you only want to work the regular landscape side then, replace sensorLandscape to landscape

You have to add click event to an exist element. You can not add event to dom elements dynamic created. I you want to add event to them, you should bind event to an existed element using ".on".

$('p').on('click','selector_you_dynamic_created',function(){...});

.delegate should work,too.

Use JavaScript Cookie plugin

Set a cookie

Cookies.set("example", "foo"); // Sample 1
Cookies.set("example", "foo", { expires: 7 }); // Sample 2
Cookies.set("example", "foo", { path: '/admin', expires: 7 }); // Sample 3

Get a cookie

alert( Cookies.get("example") );

Delete the cookie

Cookies.remove("example");
Cookies.remove('example', { path: '/admin' }) // Must specify path if used when setting.

You could use the Laravel query builder, but this is not the best way to do it.

Check Wader's answer below for the Eloquent way - which is better as it allows you to check that there is actually a user that matches the email address, and handle the error if there isn't.

DB::table('users')
        ->where('email', $userEmail)  // find your user by their email
        ->limit(1)  // optional - to ensure only one record is updated.
        ->update(array('member_type' => $plan));  // update the record in the DB. 

If you have multiple fields to update you can simply add more values to that array at the end.

You can use following regular expression construct

Punctuation: One of !"#$%&'()*+,-./:;<=>?@[]^_`{|}~

inputString.replaceAll("\\p{Punct}", "");

Old question but I should warn:

Do NOT use .split('')

You'll get weird results with non-BMP (non-Basic-Multilingual-Plane) character sets.

Reason is that methods like .split() and .charCodeAt() only respect the characters with a code point below 65536; bec. higher code points are represented by a pair of (lower valued) "surrogate" pseudo-characters.

''.length     // —> 6
''.split('')  // —> ["?", "?", "?", "?", "?", "?"]

''.length      // —> 2
''.split('')   // —> ["?", "?"]

Use ES2015 (ES6) features where possible:

Using the spread operator:

let arr = [...str];

Or Array.from

let arr = Array.from(str);

Or split with the new u RegExp flag:

let arr = str.split(/(?!$)/u);

Examples:

[...'']        // —> ["", "", ""]
[...'']     // —> ["", "", ""]

For ES5, options are limited:

I came up with this function that internally uses MDN example to get the correct code point of each character.

function stringToArray() {
  var i = 0,
    arr = [],
    codePoint;
  while (!isNaN(codePoint = knownCharCodeAt(str, i))) {
    arr.push(String.fromCodePoint(codePoint));
    i++;
  }
  return arr;
}

This requires knownCharCodeAt() function and for some browsers; a String.fromCodePoint() polyfill.

if (!String.fromCodePoint) {
// ES6 Unicode Shims 0.1 , © 2012 Steven Levithan , MIT License
    String.fromCodePoint = function fromCodePoint () {
        var chars = [], point, offset, units, i;
        for (i = 0; i < arguments.length; ++i) {
            point = arguments[i];
            offset = point - 0x10000;
            units = point > 0xFFFF ? [0xD800 + (offset >> 10), 0xDC00 + (offset & 0x3FF)] : [point];
            chars.push(String.fromCharCode.apply(null, units));
        }
        return chars.join("");
    }
}

Examples:

stringToArray('')     // —> ["", "", ""]
stringToArray('')  // —> ["", "", ""]

Note: str[index] (ES5) and str.charAt(index) will also return weird results with non-BMP charsets. e.g. ''.charAt(0) returns "?".

UPDATE: Read this nice article about JS and unicode.

Using Android's built in method

If you want every column and every row, then just pass in null for the SQLiteDatabase column and selection parameters.

Cursor cursor = db.query(TABLE_NAME, null, null, null, null, null, null, null);

More details

The other answers use rawQuery, but you can use Android's built in SQLiteDatabase. The documentation for query says that you can just pass in null to the selection parameter to get all the rows.

selection Passing null will return all rows for the given table.

And while you can also pass in null for the column parameter to get all of the columns (as in the one-liner above), it is better to only return the columns that you need. The documentation says

columns Passing null will return all columns, which is discouraged to prevent reading data from storage that isn't going to be used.

Example

SQLiteDatabase db = mHelper.getReadableDatabase();
String[] columns = {
        MyDatabaseHelper.COLUMN_1,
        MyDatabaseHelper.COLUMN_2,
        MyDatabaseHelper.COLUMN_3};
String selection = null; // this will select all rows
Cursor cursor = db.query(MyDatabaseHelper.MY_TABLE, columns, selection,
        null, null, null, null, null);

SELECT OBJECT_NAME(id)     
FROM syscomments 
WHERE [text] LIKE '%Name%' 
AND OBJECTPROPERTY(id, 'IsProcedure') = 1 
GROUP BY OBJECT_NAME(id)

Try This .....

calling [self.view setNeedsLayout]; in viewController makes it to call viewDidLayoutSubviews

This solution is applicable even when you have different size of array being merged. Also, even if the keys on which match is happening has a different name.

const arr1 = [
  { id: "abdc4051", date: "2017-01-24" }, 
  { id: "abdc4052", date: "2017-01-22" },
  { id: "abdc4053", date: "2017-01-22" }
];
const arr2 = [
  { nameId: "abdc4051", name: "ab" },
  { nameId: "abdc4052", name: "abc" }
];

Now to merge these use a Map as follows:

const map = new Map();
arr1.forEach(item => map.set(item.id, item));
arr2.forEach(item => map.set(item.nameId, {...map.get(item.nameId), ...item}));
const mergedArr = Array.from(map.values());

This should result in:

[
  {
    "id": "abdc4051",
    "date": "2017-01-24",
    "nameId": "abdc4051",
    "name": "ab"
  },
  {
    "id": "abdc4052",
    "date": "2017-01-22",
    "nameId": "abdc4052",
    "name": "abc"
  },
  {
    "id": "abdc4053",
    "date": "2017-01-22"
  }
]

Try this:

var t = this.Controls.OfType<TextBox>().AsEnumerable<TextBox>();
foreach (TextBox item in t)
{
    item.Text = "";
}

This is what I use, which does not need you to hardcore your resource names and will look for the drawable resources first in your apps resources and then in the stock android resources if nothing was found - allowing you to use default icons and such.

private class ImageGetter implements Html.ImageGetter {

     public Drawable getDrawable(String source) {
        int id;

        id = getResources().getIdentifier(source, "drawable", getPackageName());

        if (id == 0) {
            // the drawable resource wasn't found in our package, maybe it is a stock android drawable?
            id = getResources().getIdentifier(source, "drawable", "android");
        }

        if (id == 0) {
            // prevent a crash if the resource still can't be found
            return null;    
        }
        else {
            Drawable d = getResources().getDrawable(id);
            d.setBounds(0,0,d.getIntrinsicWidth(),d.getIntrinsicHeight());
            return d;
        }
     }

 }

Which can be used as such (example):

String myHtml = "This will display an image to the right <img src='ic_menu_more' />";
myTextview.setText(Html.fromHtml(myHtml, new ImageGetter(), null);

So do you want them to get the IE password-challenge box, or should they be directed to your login page and enter their information there? If it's the second option, then you should at least enable Anonymous access to your login page, since the site won't know who they are yet.

If you want the first option, then the login page they're getting forwarded to will need to read the currently logged-in user and act based on that, since they would have had to correctly authenticate to get this far.

@arad good point. In fact I just found this extension method (.NET 5.0):

PostAsJsonAsync<TValue>(HttpClient, String, TValue, CancellationToken)

from https://docs.microsoft.com/en-us/dotnet/api/system.net.http.json.httpclientjsonextensions.postasjsonasync?view=net-5.0

So one can now:

var data = new { foo = "Hello"; bar = 42; };
var response = await _Client.PostAsJsonAsync(_Uri, data, cancellationToken);

If the Proxy is which you trust, you can try: (Assume the Proxy IP is 151.101.2.10)

<?php

$trustProxyIPs = ['151.101.2.10'];

$clientIP  = isset($_SERVER['REMOTE_ADDR']) ? $_SERVER['REMOTE_ADDR'] : NULL;

if (in_array($clientIP, $trustProxyIPs)) {

    $headers = ['HTTP_CLIENT_IP', 'HTTP_X_FORWARDED_FOR'];

    foreach ($headers as $key => $header) {

        if (isset($_SERVER[$header]) && filter_var($_SERVER[$header], FILTER_VALIDATE_IP)) {

            $clientIP = $_SERVER[$header];

            break;
        }
    }
}

echo $clientIP;

This will prevent forged forward header by direct requested clients, and get real IP via trusted Proxies.

the credit goes for my senior colleague for this:

:> filename

This will not break log files, so you can even use it on syslog, for example.

You're thinking too much in pure Javascript. Get rid of your listeners on those React lifecycle methods and use event.key instead of event.keyCode (because this is not a JS event object, it is a React SyntheticEvent). Your entire component could be as simple as this (assuming you haven't bound your methods in a constructor).

onKeyPressed(e) {
  console.log(e.key);
}

render() {
  let player = this.props.boards.dungeons[this.props.boards.currentBoard].player;
  return (
    <div 
      className="player"
      style={{ position: "absolute" }}
      onKeyDown={this.onKeyPressed}
    >
      <div className="light-circle">
        <div className="image-wrapper">
          <img src={IMG_URL+player.img} />
        </div>
      </div>
    </div>
  )
}

I got the solution by using comm

comm -23 file1 file2 

will give you the desired output.

The files need to be sorted first anyway.

This happens when you do not include a message when you try to commit using:

git commit

It launches an editor environment. Quit it by typing :q! and hitting enter.

It's going to take you back to the terminal without committing, so make sure to try again, this time pass in a message:

git commit -m 'Initial commit'

That is because in Python 3, they have replaced the print statement with the print function.

The syntax is now more or less the same as before, but it requires parens:

From the "what's new in python 3" docs:

Old: print "The answer is", 2*2
New: print("The answer is", 2*2)

Old: print x,           # Trailing comma suppresses newline
New: print(x, end=" ")  # Appends a space instead of a newline

Old: print              # Prints a newline
New: print()            # You must call the function!

Old: print >>sys.stderr, "fatal error"
New: print("fatal error", file=sys.stderr)

Old: print (x, y)       # prints repr((x, y))
New: print((x, y))      # Not the same as print(x, y)!

Take a look at the formats in ?strptime

R> foo <-  factor("1/15/2006 0:00:00")
R> foo <- as.Date(foo, format = "%m/%d/%Y %H:%M:%S")                                           
R> foo                                                                                       
 [1] "2006-01-15"                                                                             
R> class(foo)                                                                                
 [1] "Date"  

Note that this will work even if foo starts out as a character. It will also work if using other date formats (as.POSIXlt, as.POSIXct).

I found that ev.stopPropagation(); worked for me.

If you mean you are only getting a null return when you use NUnit, then you probably need to copy the ConnectionString value the your app.config of your application to the app.config of your test library.

When it is run by the test loader, the test assembly is loaded at runtime and will look in its own app.config (renamed to testAssembly.dll.config at compile time) rather then your applications config file.

To get the location of the assembly you're running, try

System.Reflection.Assembly.GetExecutingAssembly().Location

#include <stdio.h>
#include <string.h>

int main ()
{
    char buf[] ="abc/qwe/ccd";
    int i = 0;
    char *p = strtok (buf, "/");
    char *array[3];

    while (p != NULL)
    {
        array[i++] = p;
        p = strtok (NULL, "/");
    }

    for (i = 0; i < 3; ++i) 
        printf("%s\n", array[i]);

    return 0;
}

int count = yourText.Length - yourText.TrimStart('$').Length;

You can use two different techniques to achieve this.

The first one is with javascript: set the scrollTop property of the scrollable element (e.g. document.body.scrollTop = 1000;).

The second is setting the link to point to a specific id in the page e.g.

<a href="mypage.html#sectionOne">section one</a>

Then if in your target page you'll have that ID the page will be scrolled automatically.

In Eclipse it is very easy to point Tomcat to a new JVM (in this example JRE6). My problem was I couldn't find where to do it. Here is the trick:

1. On the ECLIPSE top menu FILE pull down tab, select NEW, -->Other
2. ...on the New Server: Select A Wizard window, select: Server-> Server... click NEXT
3. . on the New Server: Define a New Server window, select Apache> Tomcat 7 Server
4. ..now click the line in blue and underlined entitled: Configure Runtime Environments
5. on the Server Runtime Environments window,
6. ..select Apache, expand it(click on the arrow to the left), select TOMCAT v7.0, and click EDIT.
7. you will see a window called EDIT SERVER RUNTIME ENVIRONMENT: TOMCAT SERVER
8. On this screen there is a pulldown labeled JREs.
9. You should find your JRE listed like JRE1.6.0.33. If not use the Installed JRE button.
10. Select the desired JRE. Click the FINISH button.
11. Gracefully exit, in the Server: Server Runtime Environments window, click OK
12. in the New Server: Define a new Server window, hit NEXT
13. in the New Server: Add and Remove Window, select apps and install them on the server.
14. in the New Server: Add and Remove Window, click Finish

That's all. Interesting, only steps 7-10 seem to matter, and they will change the JRE used on all servers you have previously defined to use TOMCAT v7.0. The rest of the steps are just because I can't find any other way to get to the screen except by defining a new server. Does anyone else know an easier way?

The problem is here:

document.getElementById(elementId).value

You know that HTMLElement returned from getElementById() is actually an instance of HTMLInputElement inheriting from it because you are passing an ID of input element. Similarly in statically typed Java this won't compile:

public Object foo() {
  return 42;
}

foo().signum();

signum() is a method of Integer, but the compiler only knows the static type of foo(), which is Object. And Object doesn't have a signum() method.

But the compiler can't know that, it can only base on static types, not dynamic behaviour of your code. And as far as the compiler knows, the type of document.getElementById(elementId) expression does not have value property. Only input elements have value.

For a reference check HTMLElement and HTMLInputElement in MDN. I guess Typescript is more or less consistent with these.

Alternatively, if you want to simply set the number of ticks while allowing matplotlib to position them (currently only with MaxNLocator), there is pyplot.locator_params,

pyplot.locator_params(nbins=4)

You can specify specific axis in this method as mentioned below, default is both:

# To specify the number of ticks on both or any single axes
pyplot.locator_params(axis='y', nbins=6)
pyplot.locator_params(axis='x', nbins=10)

If you want to play around with border-size, width and height and see how those can create different shapes, try this:

const sizes = [32, 32, 32, 32];_x000D_
const triangle = document.getElementById('triangle');_x000D_
_x000D_
function update({ target }) {_x000D_
  let index = null;_x000D_
  _x000D_
  if (target) {_x000D_
    index = parseInt(target.id);_x000D_
_x000D_
    if (!isNaN(index)) {_x000D_
      sizes[index] = target.value;_x000D_
    }_x000D_
  }_x000D_
  _x000D_
  window.requestAnimationFrame(() => {_x000D_
    triangle.style.borderWidth = sizes.map(size => `${ size }px`).join(' ');_x000D_
    _x000D_
    if (isNaN(index)) {_x000D_
      triangle.style[target.id] = `${ target.value }px`;_x000D_
    }_x000D_
  });_x000D_
}_x000D_
_x000D_
document.querySelectorAll('input').forEach(input => {_x000D_
  input.oninput = update;_x000D_
});_x000D_
_x000D_
update({});

body {_x000D_
  margin: 0;_x000D_
  min-height: 100vh;_x000D_
  display: flex;_x000D_
  justify-content: center;_x000D_
  align-items: center;_x000D_
  overflow: hidden;_x000D_
}_x000D_
_x000D_
#triangle {_x000D_
    border-style: solid;_x000D_
    border-color: yellow magenta blue black;_x000D_
    background: cyan;_x000D_
    height: 0px;_x000D_
    width: 0px;_x000D_
}_x000D_
_x000D_
#controls {_x000D_
  position: fixed;_x000D_
  bottom: 0;_x000D_
  left: 0;_x000D_
  right: 0;_x000D_
  background: white;_x000D_
  display: flex;_x000D_
  box-shadow: 0 0 32px rgba(0, 0, 0, .125);_x000D_
}_x000D_
_x000D_
#controls > div {_x000D_
  position: relative;_x000D_
  width: 25%;_x000D_
  padding: 8px;_x000D_
  box-sizing: border-box;_x000D_
  display: flex;_x000D_
}_x000D_
_x000D_
input {_x000D_
  margin: 0;_x000D_
  width: 100%;_x000D_
  position: relative;_x000D_
}

<div id="triangle" style="border-width: 32px 32px 32px 32px;"></div>_x000D_
_x000D_
<div id="controls">_x000D_
  <div><input type="range" min="0" max="128" value="32" id="0" /></div>_x000D_
  <div><input type="range" min="0" max="128" value="32" id="1" /></div>_x000D_
  <div><input type="range" min="0" max="128" value="32" id="2" /></div>_x000D_
  <div><input type="range" min="0" max="128" value="32" id="3" /></div>_x000D_
  <div><input type="range" min="0" max="128" value="0" id="width" /></div>_x000D_
  <div><input type="range" min="0" max="128" value="0" id="height" /></div>_x000D_
</div>

It tells taskkill that the next parameter something.exe is an image name, a.k.a executable name

C:\>taskkill /?

TASKKILL [/S system [/U username [/P [password]]]]
         { [/FI filter] [/PID processid | /IM imagename] } [/T] [/F]

Description:
    This tool is used to terminate tasks by process id (PID) or image name.

Parameter List:
    /S    system           Specifies the remote system to connect to.

    /U    [domain\]user    Specifies the user context under which the
                           command should execute.

    /P    [password]       Specifies the password for the given user
                           context. Prompts for input if omitted.

    /FI   filter           Applies a filter to select a set of tasks.
                           Allows "*" to be used. ex. imagename eq acme*

    /PID  processid        Specifies the PID of the process to be terminated.
                           Use TaskList to get the PID.

    /IM   imagename        Specifies the image name of the process
                           to be terminated. Wildcard '*' can be used
                           to specify all tasks or image names.

    /T                     Terminates the specified process and any
                           child processes which were started by it.

    /F                     Specifies to forcefully terminate the process(es).

    /?                     Displays this help message.

The root of the problem is that you are unknowingly using the Frame class from the ttk package rather than from the tkinter package. The one from ttk does not support the background option.

This is the main reason why you shouldn't do global imports -- you can overwrite the definition of classes and commands.

I recommend doing imports like this:

import tkinter as tk
import ttk

Then you prefix the widgets with either tk or ttk :

f1 = tk.Frame(..., bg=..., fg=...)
f2 = ttk.Frame(..., style=...)

It then becomes instantly obvious which widget you are using, at the expense of just a tiny bit more typing. If you had done this, this error in your code would never have happened.

Use == operator instead of isEqual

Comparing Strings

Swift provides three ways to compare String values: string equality, prefix equality, and suffix equality.

String Equality

Two String values are considered equal if they contain exactly the same characters in the same order:

let quotation = "We're a lot alike, you and I."
let sameQuotation = "We're a lot alike, you and I."
if quotation == sameQuotation {
    println("These two strings are considered equal")
}
// prints "These two strings are considered equal"
.
.
.

For more read official documentation of Swift (search Comparing Strings).

A class based clean to use solution:

import signal
import time

class GracefulKiller:
  kill_now = False
  def __init__(self):
    signal.signal(signal.SIGINT, self.exit_gracefully)
    signal.signal(signal.SIGTERM, self.exit_gracefully)

  def exit_gracefully(self,signum, frame):
    self.kill_now = True

if __name__ == '__main__':
  killer = GracefulKiller()
  while not killer.kill_now:
    time.sleep(1)
    print("doing something in a loop ...")

  print("End of the program. I was killed gracefully :)")

I am nothing adding new here but another alternate way.

 var newCodes = function() {
     var dCodes = fg.codecsCodes.rs;
     var dCodes2 = fg.codecsCodes2.rs;
     let [...val] = [dCodes,dCodes2];
     return [...val];
 };

To get the execution time as a variable in your proc:

DECLARE @EndTime datetime
DECLARE @StartTime datetime 
SELECT @StartTime=GETDATE() 

-- Write Your Query


SELECT @EndTime=GETDATE()

--This will return execution time of your query
SELECT DATEDIFF(ms,@StartTime,@EndTime) AS [Duration in millisecs] 

AND see this

Measuring Query Performance : "Execution Plan Query Cost" vs "Time Taken"

If your web server supports Serlvet 3.0 spec, like tomcat 7.0+, you can use below in web.xml as:

<session-config>
  <cookie-config>
     <http-only>true</http-only>        
     <secure>true</secure>        
  </cookie-config>
</session-config>

As mentioned in docs:

HttpOnly: Specifies whether any session tracking cookies created by this web application will be marked as HttpOnly

Secure: Specifies whether any session tracking cookies created by this web application will be marked as secure even if the request that initiated the corresponding session is using plain HTTP instead of HTTPS

Please refer to how to set httponly and session cookie for java web application

Here you can find a comprehensive solution to dump mysql structure and data like in PMA (and without using exec, passthru etc.):

https://github.com/antarasi/MySQL-Dump-with-Foreign-keys

It is fork of dszymczuk project with my enhancements.

The usage is simple

<?php
//MySQL connection parameters
$dbhost = 'localhost';
$dbuser = 'dbuser';
$dbpsw = 'pass';
$dbname = 'dbname';

//Connects to mysql server
$connessione = @mysql_connect($dbhost,$dbuser,$dbpsw);

//Set encoding
mysql_query("SET CHARSET utf8");
mysql_query("SET NAMES 'utf8' COLLATE 'utf8_general_ci'");

//Includes class
require_once('FKMySQLDump.php');


//Creates a new instance of FKMySQLDump: it exports without compress and base-16 file
$dumper = new FKMySQLDump($dbname,'fk_dump.sql',false,false);

$params = array(
    //'skip_structure' => TRUE,
    //'skip_data' => TRUE,
);

//Make dump
$dumper->doFKDump($params);

?>

works like a charm :-)

You have the right general strategy for doing this using base graphics, but as was pointed out you're essentially telling R to pick a random color from a set of 10 for each line. Given that, it's not surprising that you will occasionally get two lines with the same color. Here's an example using base graphics:

plot(0,0,xlim = c(-10,10),ylim = c(-10,10),type = "n")

cl <- rainbow(5)

for (i in 1:5){
    lines(-10:10,runif(21,-10,10),col = cl[i],type = 'b')
}

Note the use of type = "n" to suppress all plotting in the original call to set up the window, and the indexing of cl inside the for loop.

Interceptors

I had the same issue and the reason was that I hadn't returned the response in the interceptor. Javascript thought, rightfully so, that I wanted to return undefined for the promise:

// Add a request interceptor
axios.interceptors.request.use(function (config) {
    // Do something before request is sent
    return config;
  }, function (error) {
    // Do something with request error
    return Promise.reject(error);
  });

As others have said #4 is the best method when not using a library method. However you should always put null on the left side of the comparison to ensure you don't accidentally assign null to foo in case of typo. In that case the compiler will catch the mistake.

// You meant to do this
if(foo != null){

// But you made a typo like this which will always evaluate to true
if(foo = null)

// Do the comparison in this way
if(null != foo)

// So if you make the mistake in this way the compiler will catch it
if(null = foo){

// obviously the typo is less obvious when doing an equality comparison but it's a good habit either way
if(foo == null){
if(foo =  null){

Put file inside while True like so

while True:
     f = open('torecv.png','wb')
     c, addr = s.accept()     # Establish connection with client.
     print 'Got connection from', addr
     print "Receiving..."
     l = c.recv(1024)
     while (l):
         print "Receiving..."
         f.write(l)
         l = c.recv(1024)
     f.close()
     print "Done Receiving"
     c.send('Thank you for connecting')
     c.close()   

Here is a way to calculate memory usage of currently running application:

public static long getUsedMemorySize() {

    long freeSize = 0L;
    long totalSize = 0L;
    long usedSize = -1L;
    try {
        Runtime info = Runtime.getRuntime();
        freeSize = info.freeMemory();
        totalSize = info.totalMemory();
        usedSize = totalSize - freeSize;
    } catch (Exception e) {
        e.printStackTrace();
    }
    return usedSize;

}

if the name of node is for example : abcd then below query will work :

MATCH (n:abcd)
DETACH DELETE n

This will only delete the node with label "abcd" and all its relation-ships.

1. Place a breakpoint
2. Right click on the breakpoint and select 'Edit breakpoint'
3. Insert your code. Use SHIFT+ENTER to create a new line.

When you need to connect to github with a normal request (git pull origin master), setting the Host as * in ~/.ssh/config worked for me, any other Host (say, "github" or "gb") wasn't working.

Host *
    User git
    Hostname github.com
    PreferredAuthentications publickey
    IdentityFile ~/.ssh/id_rsa_xxx

@Adam Just add a function using onClick="getId()"

function getId(){console.log(this.event.target.id)}

I resolved issue using below steps :

1. Stop cassandara services

   sudo su -
   systemctl stop datastax-agent
   systemctl stop opscenterd
   systemctl stop app-dse
   

2. Take backup and Change port from 9042 to 9035

   cp /opt/dse/resources/cassandra/conf/cassandra.yaml /opt/dse/resources/cassandra/conf/bkp_cassandra.yaml
   Vi /opt/dse/resources/cassandra/conf/cassandra.yaml
   native_transport_port: 9035
   

3. Start Cassandra services

   systemctl start datastax-agent
   systemctl start opscenterd
   systemctl start app-dse
   

4. create cqlshrc file.

   vi  /root/.cassandra/cqlshrc
   
   [connection]
   hostname = 198.168.1.100
   port = 9035
   

Thanks, Mahesh

@Override
public boolean onTouchEvent(MotionEvent event)
{
    int x = (int)event.getX();
    int y = (int)event.getY();

    switch (event.getAction()) {
        case MotionEvent.ACTION_DOWN:
        case MotionEvent.ACTION_MOVE:
        case MotionEvent.ACTION_UP:
    }

    return false;
}

The three cases are so that you can react to different types of events, in this example tapping or dragging or lifting the finger again.

java.time

In Java 8 and later, use the java.time framework (Tutorial).

Duration

The Duration class represents a span of time as a number of seconds plus a fractional second. It can count days, hours, minutes, and seconds.

ZonedDateTime now = ZonedDateTime.now();
ZonedDateTime oldDate = now.minusDays(1).minusMinutes(10);
Duration duration = Duration.between(oldDate, now);
System.out.println(duration.toDays());

ChronoUnit

If all you need is the number of days, alternatively you can use the ChronoUnit enum. Notice the calculation methods return a long rather than int.

long days = ChronoUnit.DAYS.between( then, now );

One thing that you need to be aware of when reflecting on private members is that if your application is running in medium trust (as, for instance, when you are running on a shared hosting environment), it won't find them -- the BindingFlags.NonPublic option will simply be ignored.

Ok, You should "construct" the html and find the .content div.

like this:

$.ajax({
   url:href,
   type:'GET',
   success: function(data){
       $('#content').html($(data).find('#content').html());
   }
});

Simple!

Use Moment.js (https://momentjs.com/)

moment().isDST(); will give you if Day light savings is observed.

Also it has helper function to calculate relative time for you. You don't need to do manual calculations e.g moment("20200105", "YYYYMMDD").fromNow();

I'm not familiar with PHP, but I think String.split is Java equivalent to PHP explode. As for implode, standart library does not provide such functionality. You just iterate over your array and build string using StringBuilder/StringBuffer. Or you can try excellent Google Guava Splitter and Joiner or split/join methods from Apache Commons StringUtils.

In my case, I was using the 6.0.24 Tomcat version (with JDK 1.8) and resolved the problem by upgrading to the 6.0.37 version.

Also, if you install the new tomcat version in a different folder, do not forget to copy your previous version /conf folder to the new installation folder.

Use following map function to define myObject.map

o => f=> Object.keys(o).reduce((a,c)=> c=='map' ? a : (a[c]=f(o[c],c),a), {})

let map = o => f=> Object.keys(o).reduce((a,c)=> c=='map' ? a : (a[c]=f(o[c],c),a), {})



// TEST init

myObject = { 'a': 1, 'b': 2, 'c': 3 }
myObject.map = map(myObject);        

// you can do this instead above line but it is not recommended 
// ( you will see `map` key any/all objects)
// Object.prototype.map = map(myObject);

// OP desired interface described in question
newObject = myObject.map(function (value, label) {
    return  value * value;
});

console.log(newObject);

As listed in other answers, the trick (in SQL 2005 or later) is to change the global configuration settings for show advanced options and xp_cmdshell to 1, in that order.

Adding to this, if you want to preserve the previous values, you can read them from sys.configurations first, then apply them in reverse order at the end. We can also avoid unnecessary reconfigure calls:

declare @prevAdvancedOptions int
declare @prevXpCmdshell int

select @prevAdvancedOptions = cast(value_in_use as int) from sys.configurations where name = 'show advanced options'
select @prevXpCmdshell = cast(value_in_use as int) from sys.configurations where name = 'xp_cmdshell'

if (@prevAdvancedOptions = 0)
begin
    exec sp_configure 'show advanced options', 1
    reconfigure
end

if (@prevXpCmdshell = 0)
begin
    exec sp_configure 'xp_cmdshell', 1
    reconfigure
end

/* do work */

if (@prevXpCmdshell = 0)
begin
    exec sp_configure 'xp_cmdshell', 0
    reconfigure
end

if (@prevAdvancedOptions = 0)
begin
    exec sp_configure 'show advanced options', 0
    reconfigure
end

Note that this relies on SQL Server version 2005 or later (original question was for 2008).

How to print:

NSLog(@"Something To Print");

Or

NSString * someString = @"Something To Print";
NSLog(@"%@", someString);

For other types of variables, use:

NSLog(@"%@", someObject);
NSLog(@"%i", someInt);
NSLog(@"%f", someFloat);
/// etc...

Can you show it in phone?

Not by default, but you could set up a display to show you.

Update for Swift

print("Print this string")
print("Print this \(variable)")
print("Print this ", variable)
print(variable)

In shell you assign to a variable without the dollar-sign:

TEST=`pwd`
echo $TEST

that's better (and can be nested) but is not as portable as the backtics:

TEST=$(pwd)
echo $TEST

Always remember: the dollar-sign is only used when reading a variable.

1. We can use aggregate function with HAVING clause not by WHERE clause e.g. min,max,avg.

2. WHERE clause eliminates the record tuple by tuple HAVING clause eliminates entire group from the collection of group

Mostly HAVING is used when you have groups of data and WHERE is used when you have data in rows.

I find that typically:

• I need to use multiple listeners because I have several buttons.
• I want my logic to be in the activity and not the adapter or viewholder.

So @mark-keen's answer works well but having an interface provides more flexibility:

public static class MyViewHolder extends RecyclerView.ViewHolder {

    public ImageView iconImageView;
    public TextView iconTextView;

    public MyViewHolder(final View itemView) {
        super(itemView);

        iconImageView = (ImageView) itemView.findViewById(R.id.myRecyclerImageView);
        iconTextView = (TextView) itemView.findViewById(R.id.myRecyclerTextView);

        iconTextView.setOnClickListener(new View.OnClickListener() {
            @Override
            public void onClick(View v) {
                onClickListener.iconTextViewOnClick(v, getAdapterPosition());
            }
        });
        iconImageView.setOnClickListener(new View.OnClickListener() {
            @Override
            public void onClick(View v) {
                onClickListener.iconImageViewOnClick(v, getAdapterPosition());
            }
        });
    }
}

Where onClickListener is defined in your adapter:

public MyAdapterListener onClickListener;

public interface MyAdapterListener {

    void iconTextViewOnClick(View v, int position);
    void iconImageViewOnClick(View v, int position);
}

And probably set through your constructor:

public MyAdapter(ArrayList<MyListItems> newRows, MyAdapterListener listener) {

    rows = newRows;
    onClickListener = listener;
}

Then you can handle the events in your Activity or wherever your RecyclerView is being used:

mAdapter = new MyAdapter(mRows, new MyAdapter.MyAdapterListener() {
                    @Override
                    public void iconTextViewOnClick(View v, int position) {
                        Log.d(TAG, "iconTextViewOnClick at position "+position);
                    }

                    @Override
                    public void iconImageViewOnClick(View v, int position) {
                        Log.d(TAG, "iconImageViewOnClick at position "+position);
                    }
                });
mRecycler.setAdapter(mAdapter);

This is how I did it:

• Open a terminal window
• cd into YOUR_PROJECT/ios
• Remove the build folder with rm -r build
• Run react-native run-ios again

On Android prior to 4.2, go to Google Settings, tap Verify apps and uncheck the option Verify apps.

On Android 4.2+, uncheck the option Settings > Security > Verify apps and/or Settings > Developer options > Verify apps over USB.

The direct replacement is if/elif/else.

However, in many cases there are better ways to do it in Python. See "Replacements for switch statement in Python?".

You can also try this.Here you are returning the function "inside" and invoking with the second set of parenthesis.

function outer() {
  return (function inside(){
    console.log("Inside inside function");
  });
}
outer()();

Or

function outer2() {
    let inside = function inside(){
      console.log("Inside inside");
    };
    return inside;
  }
outer2()();

man ssh gives me this options would could be useful.

-i identity_file Selects a file from which the identity (private key) for RSA or DSA authentication is read. The default is ~/.ssh/identity for protocol version 1, and ~/.ssh/id_rsa and ~/.ssh/id_dsa for pro- tocol version 2. Identity files may also be specified on a per- host basis in the configuration file. It is possible to have multiple -i options (and multiple identities specified in config- uration files).

So you could create an alias in your bash config with something like

alias ssh="ssh -i /path/to/private_key"

I haven't looked into a ssh configuration file, but like the -i option this too could be aliased

-F configfile Specifies an alternative per-user configuration file. If a configuration file is given on the command line, the system-wide configuration file (/etc/ssh/ssh_config) will be ignored. The default for the per-user configuration file is ~/.ssh/config.

@Henrik's is better for usability as this will make the column character and no longer numeric but matches what you asked for...

mtcars %>%
  group_by (am, gear) %>%
  summarise (n=n()) %>%
  mutate(rel.freq = paste0(round(100 * n/sum(n), 0), "%"))

##   am gear  n rel.freq
## 1  0    3 15      79%
## 2  0    4  4      21%
## 3  1    4  8      62%
## 4  1    5  5      38%

EDIT Because Spacedman asked for it :-)

as.rel_freq <- function(x, rel_freq_col = "rel.freq", ...) {
    class(x) <- c("rel_freq", class(x))
    attributes(x)[["rel_freq_col"]] <- rel_freq_col
    x
}

print.rel_freq <- function(x, ...) {
    freq_col <- attributes(x)[["rel_freq_col"]]
    x[[freq_col]] <- paste0(round(100 * x[[freq_col]], 0), "%")   
    class(x) <- class(x)[!class(x)%in% "rel_freq"]
    print(x)
}

mtcars %>%
  group_by (am, gear) %>%
  summarise (n=n()) %>%
  mutate(rel.freq = n/sum(n)) %>%
  as.rel_freq()

## Source: local data frame [4 x 4]
## Groups: am
## 
##   am gear  n rel.freq
## 1  0    3 15      79%
## 2  0    4  4      21%
## 3  1    4  8      62%
## 4  1    5  5      38%

In addition to adding python's bin directory to $PATH variable, I also had to change the owner of that directory, to make it work. No idea why I wasn't the owner already.

chown -R ~/Library/Python/

You should really use the Literal ASP.NET control for that.

Not sure why @user3133050 is voted down, that's all you need to do...

Here's the structure you need, based on your script tag's src, assuming you are trying to load moment.js into index.html:

/js/moment.js
/some-other-directory/index.html

The ../ looks "up" at the "some-other-directory" folder level, finds the js folder next to it, and loads the moment.js inside.

It sounds like your index.html is at root level, or nested even deeper.

If you're still struggling, create a test.js file in the same location as index.html, and add a <script src="test.js"></script> and see if that loads. If that fails, check your syntax. Tested in Chrome 46.

Short answer: in the Vault. Since Windows 7, a Vault was created for storing any sensitive data among it the credentials of Internet Explorer. The Vault is in fact a LocalSystem service - vaultsvc.dll.

Long answer: Internet Explorer allows two methods of credentials storage: web sites credentials (for example: your Facebook user and password) and autocomplete data. Since version 10, instead of using the Registry a new term was introduced: Windows Vault. Windows Vault is the default storage vault for the credential manager information.

You need to check which OS is running. If its Windows 8 or greater, you call VaultGetItemW8. If its isn't, you call VaultGetItemW7.

To use the "Vault", you load a DLL named "vaultcli.dll" and access its functions as needed.

A typical C++ code will be:

hVaultLib = LoadLibrary(L"vaultcli.dll");

if (hVaultLib != NULL) 
{
    pVaultEnumerateItems = (VaultEnumerateItems)GetProcAddress(hVaultLib, "VaultEnumerateItems");
    pVaultEnumerateVaults = (VaultEnumerateVaults)GetProcAddress(hVaultLib, "VaultEnumerateVaults");
    pVaultFree = (VaultFree)GetProcAddress(hVaultLib, "VaultFree");
    pVaultGetItemW7 = (VaultGetItemW7)GetProcAddress(hVaultLib, "VaultGetItem");
    pVaultGetItemW8 = (VaultGetItemW8)GetProcAddress(hVaultLib, "VaultGetItem");
    pVaultOpenVault = (VaultOpenVault)GetProcAddress(hVaultLib, "VaultOpenVault");
    pVaultCloseVault = (VaultCloseVault)GetProcAddress(hVaultLib, "VaultCloseVault");

    bStatus = (pVaultEnumerateVaults != NULL)
        && (pVaultFree != NULL)
        && (pVaultGetItemW7 != NULL)
        && (pVaultGetItemW8 != NULL)
        && (pVaultOpenVault != NULL)
        && (pVaultCloseVault != NULL)
        && (pVaultEnumerateItems != NULL);
}

Then you enumerate all stored credentials by calling

VaultEnumerateVaults

Then you go over the results.

Based on the previous answers, and cobbled together from various places in stack overflow, here is the solution I came up with which handles the case when you actually want to submit your changes:

window.thisPage = window.thisPage || {};
window.thisPage.isDirty = false;

window.thisPage.closeEditorWarning = function (event) {
    if (window.thisPage.isDirty)
        return 'It looks like you have been editing something' +
               ' - if you leave before saving, then your changes will be lost.'
    else
        return undefined;
};

$("form").on('keyup', 'textarea', // You can use input[type=text] here as well.
             function () { 
                 window.thisPage.isDirty = true; 
             });

$("form").submit(function () {
    QC.thisPage.isDirty = false;
});
window.onbeforeunload = window.thisPage.closeEditorWarning;

It's worth noting that IE11 seems to require that the closeEditorWarning function returns undefined for it not to show an alert.

In Angular 1.3 I would do this:

HTML:

<input ng-model="msg" ng-model-options="{debounce: 1000}">

Controller:

$scope.$watch('variableName', function(nVal, oVal) {
    if (nVal !== oVal) {
        myDebouncedFunction();
    }
});

Basically you're telling angular to run myDebouncedFunction(), when the the msg scope variable changes. The attribute ng-model-options="{debounce: 1000}" makes sure that msg can only update once a second.

There are several methods.

If you want just the consolidated string value returned, this is a good quick and easy approach

DECLARE @combinedString VARCHAR(MAX)
SELECT @combinedString = COALESCE(@combinedString + ', ', '') + stringvalue
FROM jira.customfieldValue
WHERE customfield = 12534
    AND ISSUE = 19602

SELECT @combinedString as StringValue 

Which will return your combined string.

You can also try one of the XML methods e.g.

SELECT DISTINCT Issue, Customfield, StringValues
FROM Jira.customfieldvalue v1
CROSS APPLY ( SELECT StringValues + ',' 
              FROM jira.customfieldvalue v2
              WHERE v2.Customfield = v1.Customfield 
                  AND v2.Issue = v1.issue 
              ORDER BY ID 
                  FOR XML PATH('') )  D ( StringValues )
WHERE customfield = 12534
    AND ISSUE = 19602

For Sql server you can try this one.

SELECT ISNULL([NAME],'SUM'),Count([NAME]) AS COUNT
FROM TABLENAME
GROUP BY [NAME] WITH CUBE

There is another thing that really speeds up Eclipse on both Windows and especially Linux - putting the JVM in RAM disk.

For Windows you can use the commercial RAM disk driver from Qsoft.

For Linux use any of the methods described in numerous articles on the Internet. It is important to give additional space to the RAM disk that is 10% bigger than the size of the JVM.

Check it out. It really makes a difference.

Use psycopg2-binary instead of psycopg2.

pip install psycopg2-binary

Or you will get the warning below:

UserWarning: The psycopg2 wheel package will be renamed from release 2.8; in order to keep installing from binary please use "pip install psycopg2-binary" instead. For details see: http://initd.org/psycopg/docs/install.html#binary-install-from-pypi.

Reference: Psycopg 2.7.4 released | Psycopg

The line should read either:

0 0-23/2 * * * /home/username/test.sh

or

0 0,2,4,6,8,10,12,14,16,18,20,22 * * * /home/username/test.sh

After doing a git fetch, do a git log HEAD..origin/master to show the log entries between your last common commit and the origin's master branch. To show the diffs, use either git log -p HEAD..origin/master to show each patch, or git diff HEAD...origin/master (three dots not two) to show a single diff.

There normally isn't any need to undo a fetch, because doing a fetch only updates the remote branches and none of your branches. If you're not prepared to do a pull and merge in all the remote commits, you can use git cherry-pick to accept only the specific remote commits you want. Later, when you're ready to get everything, a git pull will merge in the rest of the commits.

Update: I'm not entirely sure why you want to avoid the use of git fetch. All git fetch does is update your local copy of the remote branches. This local copy doesn't have anything to do with any of your branches, and it doesn't have anything to do with uncommitted local changes. I have heard of people who run git fetch in a cron job because it's so safe. (I wouldn't normally recommend doing that, though.)

You can access your files via SSL like this:

https://s3.amazonaws.com/bucket_name/images/logo.gif

If you use a custom domain for your bucket, you can use S3 and CloudFront together with your own SSL certificate (or generate a free one via Amazon Certificate Manager): http://aws.amazon.com/cloudfront/custom-ssl-domains/

Have you tried simply selecting by Id?

$("#header").focus();

Seeing as Ids should be unique, there's no need to have a more specific selector.

 $result= mysql_query("SELECT * FROM MY_TABLE");
 while($row = mysql_fetch_array($result)){
      echo $row['whatEverColumnName'];
 }

document.getElementById("myh1id").innerHTML = "my text"

An excerpt from an apple technical note (Thanks to matthias-bauch)

Xcode includes all your command-line tools. If it is installed on your system, remove it to uninstall your tools.

If your tools were downloaded separately from Xcode, then they are located at /Library/Developer/CommandLineTools on your system. Delete the CommandLineTools folder to uninstall them.

you could easily delete using terminal:

Here is an article that explains how to remove the command line tools but do it at your own risk.Try this only if any of the above doesn't work.

To do this, I think you should probably have an additional "ORDER" table which defines the mapping of IDs to order (effectively doing what your response to your own question said), which you can then use as an additional column on your select which you can then sort on.

In that way, you explicitly describe the ordering you desire in the database, where it should be.

Ordinarily, floats aren't counted in the layout of their parents.

To prevent that, add overflow: hidden to the parent.

$mail->IsSMTP();
$mail->Host = "smtp.gmail.com";
$mail->SMTPAuth = true;
$mail->SMTPSecure = "ssl";
$mail->Username = "[email protected]";
$mail->Password = "**********";
$mail->Port = "465";

That is a working configuration.

try to replace what you have

A more real-world example:

p { margin: 10px 0;}

Based on @AlecRust idea, I did an implementation of png text service.

The demo is here:

http://lingtalfi.com/services/pngtext?color=cc0000&size=10&text=Hello%20World

There are four parameters:

• text: the string to display
• font: not use because I only have Arial.ttf anyway on this demo.
• fontSize: an integer (defaults to 12)
• color: a 6 chars hexadecimal code

Please do not use this service directly (except for testing), but use the class I created that provides the service:

https://github.com/lingtalfi/WebBox/blob/master/Image/PngTextUtil.php

class PngTextUtil
{
    /**
     * Displays a png text.
     *
     * Note: this method is meant to be used as a webservice.
     *
     * Options:
     * ------------
     * - font: string = arial/Arial.ttf
     *          The font to use.
     *          If the path starts with a slash, it's an absolute path to the font file.
     *          Else if the path doesn't start with a slash, it's a relative path to the font directory provided
     *          by this class (the WebBox/assets/fonts directory in this repository).
     * - fontSize: int = 12
     *          The font size.
     * - color: string = 000000
     *          The color of the text in hexadecimal format (6 chars).
     *          This can optionally be prefixed with a pound symbol (#).
     *
     *
     *
     *
     *
     *
     * @param string $text
     * @param array $options
     * @throws \Bat\Exception\BatException
     * @throws WebBoxException
     */
    public static function displayPngText(string $text, array $options = []): void
    {
        if (false === extension_loaded("gd")) {
            throw new WebBoxException("The gd extension is not loaded!");
        }
        header("Content-type: image/png");
        $font = $options['font'] ?? "arial/Arial.ttf";
        $fontsize = $options['fontSize'] ?? 12;
        $hexColor = $options['color'] ?? "000000";
        if ('/' !== substr($font, 0, 1)) {
            $fontDir = __DIR__ . "/../assets/fonts";
            $font = $fontDir . "/" . $font;
        }
        $rgbColors = ConvertTool::convertHexColorToRgb($hexColor);
        //--------------------------------------------
        // GET THE TEXT BOX DIMENSIONS
        //--------------------------------------------
        $charWidth = $fontsize;
        $charFactor = 1;
        $textLen = mb_strlen($text);
        $imageWidth = $textLen * $charWidth * $charFactor;
        $imageHeight = $fontsize;
        $logoimg = imagecreatetruecolor($imageWidth, $imageHeight);
        imagealphablending($logoimg, false);
        imagesavealpha($logoimg, true);
        $col = imagecolorallocatealpha($logoimg, 255, 255, 255, 127);
        imagefill($logoimg, 0, 0, $col);
        $white = imagecolorallocate($logoimg, $rgbColors[0], $rgbColors[1], $rgbColors[2]); //for font color
        $x = 0;
        $y = $fontsize;
        $angle = 0;
        $bbox = imagettftext($logoimg, $fontsize, $angle, $x, $y, $white, $font, $text); //fill text in your image
        $boxWidth = $bbox[4] - $bbox[0];
        $boxHeight = $bbox[7] - $bbox[1];
        imagedestroy($logoimg);
        //--------------------------------------------
        // CREATE THE PNG
        //--------------------------------------------
        $imageWidth = abs($boxWidth);
        $imageHeight = abs($boxHeight);
        $logoimg = imagecreatetruecolor($imageWidth, $imageHeight);
        imagealphablending($logoimg, false);
        imagesavealpha($logoimg, true);
        $col = imagecolorallocatealpha($logoimg, 255, 255, 255, 127);
        imagefill($logoimg, 0, 0, $col);
        $white = imagecolorallocate($logoimg, $rgbColors[0], $rgbColors[1], $rgbColors[2]); //for font color
        $x = 0;
        $y = $fontsize;
        $angle = 0;
        imagettftext($logoimg, $fontsize, $angle, $x, $y, $white, $font, $text); //fill text in your image
        imagepng($logoimg); //save your image at new location $target
        imagedestroy($logoimg);
    }
}

Note: if you don't use the universe framework, you will need to replace this line:

$rgbColors = ConvertTool::convertHexColorToRgb($hexColor);

With this code:

$rgbColors = sscanf($hexColor, "%02x%02x%02x");

In which case your hex color must be exactly 6 chars long (don't put the hash symbol (#) in front of it).

Note: in the end, I did not use this service, because I found that the font was ugly and worse: it was not possible to select the text. But for the sake of this discussion I thought this code was worth sharing...

Define the variables at the beginning of the function so if there are no records, the variables exist and you won't get the error. Check for null values in the returned array.

$hn = null;
$pid = null;
$datereg = null;
$prefix = null;
$fname = null;
$lname = null;
$age = null;
$sex = null;

Use a BinaryReader object to return a byte array from the stream like:

byte[] fileData = null;
using (var binaryReader = new BinaryReader(Request.Files[0].InputStream))
{
    fileData = binaryReader.ReadBytes(Request.Files[0].ContentLength);
}

I would recommend separating out all of the foreign-key constraints from your CREATE TABLE statements. Create all the tables first without FK constraints, and then create all the FK constraints once you have created the tables.

You can add an FK constraint to a table using SQL like the following:

ALTER TABLE orders ADD CONSTRAINT orders_FK
  FOREIGN KEY (m_p_unique_id) REFERENCES library (m_p_unique_id);

In particular, your formats and library tables both have foreign-key constraints on one another. The two CREATE TABLE statements to create these two tables can never run successfully, as each will only work when the other table has already been created.

Separating out the constraint creation allows you to create tables with FK constraints on one another. Also, if you have an error with a constraint, only that constraint fails to be created. At present, because you have errors in the constraints in your CREATE TABLE statements, then entire table creation fails and you get various knock-on errors because FK constraints may depend on these tables that failed to create.

Detecting porn images is still a definite AI task which is very much theoretical yet.

Harvest collective power and human intelligence by adding a button/link "Report spam/abuse". Or employ several moderators to do this job.

P.S. Really surprised how many people ask questions assuming software and algorithms are all-mighty without even thinking whether what they want could be done. Are they representatives of that new breed of programmers who have no understanding of hardware, low-level programming and all that "magic behind"?

P.S. #2. I also remember that periodically it happens that some situation when people themselves cannot decide whether a picture is porn or art is taken to the court. Even after the court rules, chances are half of the people will consider the decision wrong. The last stupid situation of the kind was quite recently when a Wikipedia page got banned in UK because of a CD cover image that features some nakedness.

export default affects the syntax when importing the exported "thing", when allowing to import, whatever has been exported, by choosing the name in the import itself, no matter what was the name when it was exported, simply because it's marked as the "default".

A useful use case, which I like (and use), is allowing to export an anonymous function without explicitly having to name it, and only when that function is imported, it must be given a name:

Example:

Export 2 functions, one is default:

export function divide( x ){
    return x / 2;
}

// only one 'default' function may be exported and the rest (above) must be named
export default function( x ){  // <---- declared as a default function
    return x * x;
}

Import the above functions. Making up a name for the default one:

// The default function should be the first to import (and named whatever)
import square, {divide} from './module_1.js'; // I named the default "square" 

console.log( square(2), divide(2) ); // 4, 1

When the {} syntax is used to import a function (or variable) it means that whatever is imported was already named when exported, so one must import it by the exact same name, or else the import wouldn't work.

Erroneous Examples:

1. The default function must be first to import

   import {divide}, square from './module_1.js
   

2. divide_1 was not exported in module_1.js, thus nothing will be imported

   import {divide_1} from './module_1.js
   

3. square was not exported in module_1.js, because {} tells the engine to explicitly search for named exports only.

   import {square} from './module_1.js
   

DateTimePicker1.value = Format(Date.Now)

For Windows 7:
Control Panel > Programs > Programs and Features > Turn Windows Features On or Off > to turn on IIS click on Check box.

Another potential cause for this error is Sandbox Mode, which prevents MS Access from running certain statements that are considered unsafe. This can be disabled by setting the following registry key...

HKLM\Software\Microsoft\Office\12.0\Access Connectivity Engine\Engines
    SandboxMode (DWORD Value)

...to either 0 or 2:

SETTING DESCRIPTION
   0    Sandbox mode is disabled at all times.
   1    Sandbox mode is used for Access, but not for non-Access programs.
   2    Sandbox mode is used for non-Access programs, but not for Access.
   3    Sandbox mode is used at all times. This is the default value.

For me the solution was besides using "Ntlm" as credential type:

    XxxSoapClient xxxClient = new XxxSoapClient();
    ApplyCredentials(userName, password, xxxClient.ClientCredentials);

    private static void ApplyCredentials(string userName, string password, ClientCredentials clientCredentials)
    {
        clientCredentials.UserName.UserName = userName;
        clientCredentials.UserName.Password = password;
        clientCredentials.Windows.ClientCredential.UserName = userName;
        clientCredentials.Windows.ClientCredential.Password = password;
        clientCredentials.Windows.AllowNtlm = true;
        clientCredentials.Windows.AllowedImpersonationLevel = System.Security.Principal.TokenImpersonationLevel.Impersonation;
    }  

In DB2, using single quotes instead of your double quotes will work. So that could translate the same in Oracle..

SELECT CustomerName AS Customer, '' AS Contact 
FROM Customers;

backup log logname with truncate_only followed by a dbcc shrinkfile command

Variadic Functions can be dangerous. Here's a safer trick:

   void func(type* values) {
        while(*values) {
            x = *values++;
            /* do whatever with x */
        }
    }

func((type[]){val1,val2,val3,val4,0});

You could remove bcrypt entirely and install bcryptjs. It is ~30% slower, but has no dependencies, so no pains installing it.

npm i -S bcryptjs && npm uninstall -S bcrypt

We've installed it successfully for our applications. We had issues with bcrypt not compiling on AWS instances for Node v8.x

Since I needed this too, I was curious as to which alternative was the fastest.

I found that -- if all you want is a file count -- Baba's solution is a lot faster than the others. I was quite surprised.

Try it out for yourself:

<?php
define('MYDIR', '...');

foreach (array(1, 2, 3) as $i)
{
    $t = microtime(true);
    $count = run($i);
    echo "$i: $count (".(microtime(true) - $t)." s)\n";
}

function run ($n)
{
    $func = "countFiles$n";
    $x = 0;
    for ($f = 0; $f < 5000; $f++)
        $x = $func();
    return $x;
}

function countFiles1 ()
{
    $dir = opendir(MYDIR);
    $c = 0;
    while (($file = readdir($dir)) !== false)
        if (!in_array($file, array('.', '..')))
            $c++;
    closedir($dir);
    return $c;
}

function countFiles2 ()
{
    chdir(MYDIR);
    return count(glob("*"));
}

function countFiles3 () // Fastest method
{
    $f = new FilesystemIterator(MYDIR, FilesystemIterator::SKIP_DOTS);
    return iterator_count($f);
}
?>

Test run: (obviously, glob() doesn't count dot-files)

1: 99 (0.4815571308136 s)
2: 98 (0.96104407310486 s)
3: 99 (0.26513481140137 s)

I was facing a similar problem when starting up the application (using Spring Boot) with the database server down.

Hibernate can determine the correct dialect to use automatically, but in order to do this, it needs a live connection to the database.

Instead of

this.$axios.get('items')

use

this.$axios({ url: 'items', baseURL: 'http://new-url.com' })

If you don't pass method: 'XXX' then by default, it will send via get method.

Request Config: https://github.com/axios/axios#request-config