Programs & Examples On #Plagiarism detection

There is an implementation in my TypeScript utilities based on JavaScript GUID generators.

Here is the code:

class Guid {_x000D_
  static newGuid() {_x000D_
    return 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx'.replace(/[xy]/g, function(c) {_x000D_
      var r = Math.random() * 16 | 0,_x000D_
        v = c == 'x' ? r : (r & 0x3 | 0x8);_x000D_
      return v.toString(16);_x000D_
    });_x000D_
  }_x000D_
}_x000D_
_x000D_
// Example of a bunch of GUIDs_x000D_
for (var i = 0; i < 100; i++) {_x000D_
  var id = Guid.newGuid();_x000D_
  console.log(id);_x000D_
}

Please note the following:

C# GUIDs are guaranteed to be unique. This solution is very likely to be unique. There is a huge gap between "very likely" and "guaranteed" and you don't want to fall through this gap.

JavaScript-generated GUIDs are great to use as a temporary key that you use while waiting for a server to respond, but I wouldn't necessarily trust them as the primary key in a database. If you are going to rely on a JavaScript-generated GUID, I would be tempted to check a register each time a GUID is created to ensure you haven't got a duplicate (an issue that has come up in the Chrome browser in some cases).

You could use RAISE_APPLICATION_ERROR like this:

DECLARE
    ex_custom       EXCEPTION;
BEGIN
    RAISE ex_custom;
EXCEPTION
    WHEN ex_custom THEN
        RAISE_APPLICATION_ERROR(-20001,'My exception was raised');
END;
/

That will raise an exception that looks like:

ORA-20001: My exception was raised

The error number can be anything between -20001 and -20999.

you should calculate the complexity of algorithms used by the methods OrderBy and Sort. QuickSort has a complexity of n (log n) as i remember, where n is the length of the array.

i've searched for orderby's too, but i could not find any information even in msdn library. if you have not any same values and sorting related to only one property, i prefer to use Sort() method; if not than use OrderBy.

If anyone came here trying to do this with a decimal like me:

myFloat = parseFloat(myString);

If you just need an Int, that's well covered in the other answers.

document.getElementById("idframe").contentWindow.document.getElementById("idelement").value;

I used this method and managed to get the desired output. my script

x = "{'inner-temperature': 31.73, 'outer-temperature': 28.38, 'keys-value': 0}"

x = x.replace("'", '"')
j = json.loads(x)
print(j['keys-value'])

output

>>> 0

Ionic 4, opened /platforms/android/platform.properties, changed the version of the listed library throwing the error (in my case, com.android.support:support-v4:27.+) to:

com.android.support:support-v4:28.+

DocumentElement is the root node of the document so childNodes[1] doesn't exist in that document. childNodes[0] would be the <Settings> node

You pass the expression you want to group by rather than the alias

SELECT       LastName + ', ' + FirstName AS 'FullName'
FROM         customers
GROUP BY      LastName + ', ' + FirstName

There are now 8-digit hex codes in CSS4 (CSS Color Module Level 4), the last two digit (or in case of the abbreviation, the last of the 4 digits) represents alpha, 00 meaning fully transparent and ff meaning fully opaque, 7f representing an opacity of 0.5 etc.

The format is '#rrggbbaa' or the shorthand, '#rgba'.

Support is lacking for MS browsers, they might be less cooperative or just slower than the other developers, either or both of which actually sealed IE's fate: https://caniuse.com/#feat=css-rrggbbaa

I have been using the snippet below when working with CLI tools and I want to know if some resource exist or not, but I don't care about the output.

if [ -z "$(cat no_exist 2>&1 >/dev/null)" ]; then
    echo "none exist actually exist!"
fi

Here's a nice implementation using the Thread class: http://g-off.net/software/a-python-repeatable-threadingtimer-class

the code below is a little more quick and dirty:

from threading import Timer
from time import sleep

def hello():
    print "hello, world"
    t = Timer(3,hello)
    t.start()

t = Timer(3, hello)
t.start() # after 3 seconds, "hello, world" will be printed

# timer will wake up ever 3 seconds, while we do something else
while True:
    print "do something else"
    sleep(10)

What I was looking for was this:

git diff <ref1>..<ref2> <dirname>

NP-Complete is a class of problems.

The class P consists of those problems that are solvable in polynomial time. For example, they could be solved in O(n^k) for some constant k, where n is the size of the input. Simply put, you can write a program that will run in reasonable time.

The class NP consists of those problems that are verifiable in polynomial time. That is, if we are given a potential solution, then we could check if the given solution is correct in polynomial time.

Some examples are the Boolean Satisfiability (or SAT) problem, or the Hamiltonian-cycle problem. There are many problems that are known to be in the class NP.

NP-Complete means the problem is at least as hard as any problem in NP.

It is important to computer science because it has been proven that any problem in NP can be transformed into another problem in NP-complete. That means that a solution to any one NP-complete problem is a solution to all NP problems.

Many algorithms in security depends on the fact that no known solutions exist for NP hard problems. It would definitely have a significant impact on computing if a solution were found.

First off, Xvfb doesn't read configuration from xorg.conf. Xvfb is a variant of the KDrive X servers and like all members of that family gets its configuration from the command line.

It is true that XRandR and Xinerama are mutually exclusive, but in the case of Xvfb there's no Xinerama in the first place. You can enable the XRandR extension by starting Xvfb using at least the following command line options

Xvfb +extension RANDR [further options]

Here's the pseudo-code which should be convertible into any procedural language:

array = [2, 42, 82, 122, 162, 202, 242, 282, 322, 362]
number = 112
print closest (number, array)

def closest (num, arr):
    curr = arr[0]
    foreach val in arr:
        if abs (num - val) < abs (num - curr):
            curr = val
    return curr

It simply works out the absolute differences between the given number and each array element and gives you back one of the ones with the minimal difference.

For the example values:

number = 112  112  112  112  112  112  112  112  112  112
array  =   2   42   82  122  162  202  242  282  322  362
diff   = 110   70   30   10   50   90  130  170  210  250
                         |
                         +-- one with minimal absolute difference.

As a proof of concept, here's the Python code I used to show this in action:

def closest (num, arr):
    curr = arr[0]
    for index in range (len (arr)):
        if abs (num - arr[index]) < abs (num - curr):
            curr = arr[index]
    return curr

array = [2, 42, 82, 122, 162, 202, 242, 282, 322, 362]
number = 112
print closest (number, array)

And, if you really need it in Javascript, see below for a complete HTML file which demonstrates the function in action:

<html>
    <head></head>
    <body>
        <script language="javascript">
            function closest (num, arr) {
                var curr = arr[0];
                var diff = Math.abs (num - curr);
                for (var val = 0; val < arr.length; val++) {
                    var newdiff = Math.abs (num - arr[val]);
                    if (newdiff < diff) {
                        diff = newdiff;
                        curr = arr[val];
                    }
                }
                return curr;
            }
            array = [2, 42, 82, 122, 162, 202, 242, 282, 322, 362];
            number = 112;
            alert (closest (number, array));
        </script>
    </body>
</html>

Now keep in mind there may be scope for improved efficiency if, for example, your data items are sorted (that could be inferred from the sample data but you don't explicitly state it). You could, for example, use a binary search to find the closest item.

You should also keep in mind that, unless you need to do it many times per second, the efficiency improvements will be mostly unnoticable unless your data sets get much larger.

If you do want to try it that way (and can guarantee the array is sorted in ascending order), this is a good starting point:

<html>
    <head></head>
    <body>
        <script language="javascript">
            function closest (num, arr) {
                var mid;
                var lo = 0;
                var hi = arr.length - 1;
                while (hi - lo > 1) {
                    mid = Math.floor ((lo + hi) / 2);
                    if (arr[mid] < num) {
                        lo = mid;
                    } else {
                        hi = mid;
                    }
                }
                if (num - arr[lo] <= arr[hi] - num) {
                    return arr[lo];
                }
                return arr[hi];
            }
            array = [2, 42, 82, 122, 162, 202, 242, 282, 322, 362];
            number = 112;
            alert (closest (number, array));
        </script>
    </body>
</html>

It basically uses bracketing and checking of the middle value to reduce the solution space by half for each iteration, a classic O(log N) algorithm whereas the sequential search above was O(N):

0  1  2   3   4   5   6   7   8   9  <- indexes
2 42 82 122 162 202 242 282 322 362  <- values
L             M                   H  L=0, H=9, M=4, 162 higher, H<-M
L     M       H                      L=0, H=4, M=2, 82 lower/equal, L<-M
      L   M   H                      L=2, H=4, M=3, 122 higher, H<-M
      L   H                          L=2, H=3, difference of 1 so exit
          ^
          |
          H (122-112=10) is closer than L (112-82=30) so choose H

As stated, that shouldn't make much of a difference for small datasets or for things that don't need to be blindingly fast, but it's an option you may want to consider.

To expand on @EJP, the concept of 'precision' when dealing with doubles is extremely fraught. As discussed in https://stackoverflow.com/a/3730040/390153 you can't even represent 0.1 as a double regardless of the precision, for the same reason you can't represent 1/3 in base 10 with finite precision.

You need to consider the problem you are trying to solve, and consider:

a) Should I be using doubles in the first place; if precision is a relevant concept, then using doubles may well be a mistake.

b) If doubles are appropriate, what do I mean by precision? If you are only talking about display, wrap the logic in a display function and you will only need to deal with it in one place; ie. apply the DRY principle.

Panama Jack Example not work for me - Give Fatal error: Call to undefined function build_unique_path(). I used this code - (more simple - my opinion) :

// options
$login_email = '[email protected]';
$login_pass = 'alabala4807';
$cookie_file_path = "/tmp/cookies.txt";
$LOGINURL = "http://alabala.com/index.php?route=account/login"; 
$agent = "Nokia-Communicator-WWW-Browser/2.0 (Geos 3.0 Nokia-9000i)";

// begin script
$ch = curl_init();

// extra headers
$headers[] = "Accept: */*";
$headers[] = "Connection: Keep-Alive";

// basic curl options for all requests
curl_setopt($ch, CURLOPT_HTTPHEADER,  $headers);
curl_setopt($ch, CURLOPT_HEADER,  0);
curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, 0);
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);  
       curl_setopt($ch, CURLOPT_USERAGENT, $agent); 
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); 
curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 1); 
curl_setopt($ch, CURLOPT_COOKIEFILE, $cookie_file_path); 
curl_setopt($ch, CURLOPT_COOKIEJAR, $cookie_file_path); 

// set first URL
curl_setopt($ch, CURLOPT_URL, $LOGINURL);

// execute session to get cookies and required form inputs
$content = curl_exec($ch); 

// grab the hidden inputs from the form required to login
$fields = getFormFields($content);
$fields['email'] = $login_email;
$fields['password'] = $login_pass;

// set postfields using what we extracted from the form
$POSTFIELDS = http_build_query($fields); 
// change URL to login URL
curl_setopt($ch, CURLOPT_URL, $LOGINURL); 

// set post options
curl_setopt($ch, CURLOPT_POST, 1); 
curl_setopt($ch, CURLOPT_POSTFIELDS, $POSTFIELDS); 

// perform login
$result = curl_exec($ch);  

print $result; 

function getFormFields($data)
{
    if (preg_match('/()/is', $data, $matches)) {
      $inputs = getInputs($matches[1]);

      return $inputs;
    } else {
      die('didnt find login form');
     }
}

function getInputs($form)
{
    $inputs = array();
    $elements = preg_match_all("/(]+>)/is", $form, $matches);
    if ($elements > 0) {
        for($i = 0;$i            $el = preg_replace('/\s{2,}/', ' ', $matches[1][$i]);
            if (preg_match('/name=(?:["\'])?([^"\'\s]*)/i', $el, $name)) {
                $name  = $name[1];

                $value = '';
                if (preg_match('/value=(?:["\'])?([^"\'\s]*)/i', $el, $value)) {
                    $value = $value[1];
                }

                $inputs[$name] = $value;
            }
        }
    }

    return $inputs;
}

$grab_url='http://grab.url/alabala';

//page with the content I want to grab
curl_setopt($ch, CURLOPT_URL, $grab_url);
//do stuff with the info with DomDocument() etc
$html = curl_exec($ch);
curl_close($ch);

var_dump($html); 
die;

Minizip does have an example programs to demonstrate its usage - the files are called minizip.c and miniunz.c.

Update: I had a few minutes so I whipped up this quick, bare bones example for you. It's very smelly C, and I wouldn't use it without major improvements. Hopefully it's enough to get you going for now.

// uzip.c - Simple example of using the minizip API.
// Do not use this code as is! It is educational only, and probably
// riddled with errors and leaks!
#include <stdio.h>
#include <string.h>

#include "unzip.h"

#define dir_delimter '/'
#define MAX_FILENAME 512
#define READ_SIZE 8192

int main( int argc, char **argv )
{
    if ( argc < 2 )
    {
        printf( "usage:\n%s {file to unzip}\n", argv[ 0 ] );
        return -1;
    }

    // Open the zip file
    unzFile *zipfile = unzOpen( argv[ 1 ] );
    if ( zipfile == NULL )
    {
        printf( "%s: not found\n" );
        return -1;
    }

    // Get info about the zip file
    unz_global_info global_info;
    if ( unzGetGlobalInfo( zipfile, &global_info ) != UNZ_OK )
    {
        printf( "could not read file global info\n" );
        unzClose( zipfile );
        return -1;
    }

    // Buffer to hold data read from the zip file.
    char read_buffer[ READ_SIZE ];

    // Loop to extract all files
    uLong i;
    for ( i = 0; i < global_info.number_entry; ++i )
    {
        // Get info about current file.
        unz_file_info file_info;
        char filename[ MAX_FILENAME ];
        if ( unzGetCurrentFileInfo(
            zipfile,
            &file_info,
            filename,
            MAX_FILENAME,
            NULL, 0, NULL, 0 ) != UNZ_OK )
        {
            printf( "could not read file info\n" );
            unzClose( zipfile );
            return -1;
        }

        // Check if this entry is a directory or file.
        const size_t filename_length = strlen( filename );
        if ( filename[ filename_length-1 ] == dir_delimter )
        {
            // Entry is a directory, so create it.
            printf( "dir:%s\n", filename );
            mkdir( filename );
        }
        else
        {
            // Entry is a file, so extract it.
            printf( "file:%s\n", filename );
            if ( unzOpenCurrentFile( zipfile ) != UNZ_OK )
            {
                printf( "could not open file\n" );
                unzClose( zipfile );
                return -1;
            }

            // Open a file to write out the data.
            FILE *out = fopen( filename, "wb" );
            if ( out == NULL )
            {
                printf( "could not open destination file\n" );
                unzCloseCurrentFile( zipfile );
                unzClose( zipfile );
                return -1;
            }

            int error = UNZ_OK;
            do    
            {
                error = unzReadCurrentFile( zipfile, read_buffer, READ_SIZE );
                if ( error < 0 )
                {
                    printf( "error %d\n", error );
                    unzCloseCurrentFile( zipfile );
                    unzClose( zipfile );
                    return -1;
                }

                // Write data to file.
                if ( error > 0 )
                {
                    fwrite( read_buffer, error, 1, out ); // You should check return of fwrite...
                }
            } while ( error > 0 );

            fclose( out );
        }

        unzCloseCurrentFile( zipfile );

        // Go the the next entry listed in the zip file.
        if ( ( i+1 ) < global_info.number_entry )
        {
            if ( unzGoToNextFile( zipfile ) != UNZ_OK )
            {
                printf( "cound not read next file\n" );
                unzClose( zipfile );
                return -1;
            }
        }
    }

    unzClose( zipfile );

    return 0;
}

I built and tested it with MinGW/MSYS on Windows like this:

contrib/minizip/$ gcc -I../.. -o unzip uzip.c unzip.c ioapi.c ../../libz.a
contrib/minizip/$ ./unzip.exe /j/zlib-125.zip

    // this will give all the forms on the page.

    $('form')

   // If you know the name of form then.

    $('form[name="myFormName"]')

  //  If you don't know know the name but the position (starts with 0)

    $('form:eq(1)')  // 2nd form will be fetched.

You can also use:

@Scripts.RenderFormat("<script type=\"text/javascript\" src=\"{0}\"></script>", "~/bundles/mybundle")

To specify the format of your output in a scenario where you need to use Charset, Type, etc.

//More Efficiently
public class Multiples {
    public static void main(String[]args) {

        int j = 5;

        System.out.println(j % 4 == 0);

    }
}

The easiest and cleanest way, without any hacks, is to just to indent the ul (or ol), like so:

ol {
  padding-left: 40px; // Or whatever padding your font size needs
}

This gives the same result as the accepted answer: https://jsfiddle.net/5wxf2ayu/

Screenshot:

The closest you will ever get to doing such thing is a dissasembler, or debug info (Log2Vis.pdb).

Import the spring util namespace. Then you can define a list bean as follows:

<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:util="http://www.springframework.org/schema/util"
xsi:schemaLocation="http://www.springframework.org/schema/beans
                    http://www.springframework.org/schema/beans/spring-beans-3.0.xsd
                    http://www.springframework.org/schema/util
                    http://www.springframework.org/schema/util/spring-util-2.5.xsd">


<util:list id="myList" value-type="java.lang.String">
    <value>foo</value>
    <value>bar</value>
</util:list>

The value-type is the generics type to be used, and is optional. You can also specify the list implementation class using the attribute list-class.

"start" is a name of a script, in npm you run scripts like this npm run scriptName, npm start is also a short for npm run start

As for "react-scripts" this is a script related specifically to create-react-app

To finally answer the title question: It is (a client side setting) in (project, profile or settings)

[plugin]?[r|R]epository/[releases|snapshots]/updatePolicy

... tag.

The (currently, maven: 3.6.0, but I suppose "far backwards" compatible) possible values are :

/**
 * Never update locally cached data.
 */
public static final String UPDATE_POLICY_NEVER = "never";
/**
 * Always update locally cached data.
 */
public static final String UPDATE_POLICY_ALWAYS = "always";
/**
 * Update locally cached data once a day.
 */
public static final String UPDATE_POLICY_DAILY = "daily";
/**
 * Update locally cached data **every X minutes** as given by "interval:X".
 */
public static final String UPDATE_POLICY_INTERVAL = "interval";

The current (maven 3.6.0) evaluation of this tag is implemented as follows:

public boolean isUpdatedRequired( RepositorySystemSession session, long lastModified, String policy )
{
    boolean checkForUpdates;
    if ( policy == null )
    {
        policy = "";
    }
    if ( RepositoryPolicy.UPDATE_POLICY_ALWAYS.equals( policy ) )
    {
        checkForUpdates = true;
    }
    else if ( RepositoryPolicy.UPDATE_POLICY_DAILY.equals( policy ) )
    {
        Calendar cal = Calendar.getInstance();
        cal.set( Calendar.HOUR_OF_DAY, 0 );
        cal.set( Calendar.MINUTE, 0 );
        cal.set( Calendar.SECOND, 0 );
        cal.set( Calendar.MILLISECOND, 0 );
        checkForUpdates = cal.getTimeInMillis() > lastModified;
    }
    else if ( policy.startsWith( RepositoryPolicy.UPDATE_POLICY_INTERVAL ) )
    {
        int minutes = getMinutes( policy );
        Calendar cal = Calendar.getInstance();
        cal.add( Calendar.MINUTE, -minutes );
        checkForUpdates = cal.getTimeInMillis() > lastModified;
    }
    else
    {
        // assume "never"
        checkForUpdates = false;
        if ( !RepositoryPolicy.UPDATE_POLICY_NEVER.equals( policy ) )
        {
            LOGGER.warn( "Unknown repository update policy '{}', assuming '{}'",
                    policy, RepositoryPolicy.UPDATE_POLICY_NEVER );
        }
    }
    return checkForUpdates;
}

..with:

private int getMinutes( String policy )
{
    int minutes;
    try
    {
        String s = policy.substring( RepositoryPolicy.UPDATE_POLICY_INTERVAL.length() + 1 );
        minutes = Integer.valueOf( s );
    }
    catch ( RuntimeException e )
    {
        minutes = 24 * 60;
        LOGGER.warn( "Non-parseable repository update policy '{}', assuming '{}:1440'",
                policy, RepositoryPolicy.UPDATE_POLICY_INTERVAL );
    }
    return minutes;
}

...where lastModified is the (local file) "modified timestamp" of an/each underlying artifact.

In particular for the interval:x setting:

• the colon : is not that strict - any "non-empty" character could do it (=, , ...).
• negative values x < 0 should yield to "never".
• interval:0 I would assume a "minutely" (0-59 secs. or above...) interval.
• number format exceptions result in 24 * 60 minutes (~"daily").

..see: DefaultUpdatePolicyAnalyzer, DefaultMetadataResolver#resolveMetadata() and RepositoryPolicy

If you are using something like this.

Response.Write("Hello \r\n")
Response.Write("World \r\n")

and the output is

Hello\r\nWorld\r\n

Then you are basically looking for something like this

Response.Write("Hello <br/>")
Response.Write("World <br/>")

This will output

Hello 
World

you can also just define "<br />" as constant and reuse it

eg.

Public Const HtmlNewLine as string ="<br />"
Response.Write("Hello " &  HtmlNewLine) 
Response.Write("World " &  HtmlNewLine)

I've meet the probleme recently. The trouble is coming when the filename lenght is greather than 20 characters. So the bypass is to change your filename length, but the trick is also a good one.

$.ajaxSetup({async: false}); // passage en mode synchrone
$.ajax({
   url: pathpays,
   success: function(data) {
      //debug(data);
      $(data).find("a:contains(.png),a:contains(.jpg)").each(function() {
         var image = $(this).attr("href");
         // will loop through
         debug("Found a file: " + image);
         text +=  '<img class="arrondie" src="' + pathpays + image + '" />';
      });
      text = text + '</div>';
      //debug(text);
   }
});

After more investigation the trouble is coming from ajax request: Put an eye to the html code returned by ajax:

<a href="Paris-Palais-de-la-cite%20-%20Copie.jpg">Paris-Palais-de-la-c..&gt;</a>
</td>
<td align="right">2015-09-05 09:50 </td>
<td align="right">4.3K</td>
<td>&nbsp;</td>
</tr>

As you can see the filename is splitted after the character 20, so the $(data).find("a:contains(.png)) is not able to find the correct extention.

But if you check the value of the href parameter it contents the fullname of the file.

I dont know if I can to ask to ajax to return the full filename in the text area?

Hope to be clear

I've found the right test to gather all files:

$(data).find("[href$='.jpg'],[href$='.png']").each(function() {  
var image = $(this).attr("href");

You can still use filter, moving to an outside function the element modification (iterating just once)

def do_the_magic(x):
    do_action(x)
    return check(x)

# you can get a different filtered list
filter(do_the_magic,yourList)

# or have it modified in place (as suggested by Steven Rumbalski, see comment)
yourList[:] = itertools.ifilter(do_the_magic, yourList)

is is generally preferred when comparing arbitrary objects to singletons like None because it is faster and more predictable. is always compares by object identity, whereas what == will do depends on the exact type of the operands and even on their ordering.

This recommendation is supported by PEP 8, which explicitly states that "comparisons to singletons like None should always be done with is or is not, never the equality operators."

dynamic_cast is known to be inefficient. It traverses up the inheritance hierarchy, and it is the only solution if you have multiple levels of inheritance, and need to check if an object is an instance of any one of the types in its type hierarchy.

But if a more limited form of instanceof that only checks if an object is exactly the type you specify, suffices for your needs, the function below would be a lot more efficient:

template<typename T, typename K>
inline bool isType(const K &k) {
    return typeid(T).hash_code() == typeid(k).hash_code();
}

Here's an example of how you'd invoke the function above:

DerivedA k;
Base *p = &k;

cout << boolalpha << isType<DerivedA>(*p) << endl;  // true
cout << boolalpha << isType<DerivedB>(*p) << endl;  // false

You'd specify template type A (as the type you're checking for), and pass in the object you want to test as the argument (from which template type K would be inferred).

I think it's meant to mean nothing. The wiki says:

"Foo is commonly used with the metasyntactic variables bar and foobar."

I was trying to install from source, and got that error. (Why would a wheel built on this machine not be compatible with it-?)

For me, the tag --ignore-installed made all the difference.

pip install --ignore-installed /tmp/tensorflow_pkg/tensorflow-1.8.0-cp36-cp36m-linux_x86_64.whl

worked, while

pip install /tmp/tensorflow_pkg/tensorflow-1.8.0-cp36-cp36m-linux_x86_64.whl 

threw the abovementioned error.

Context: Conda environment; might have been a problem specific to this

I had a similar problem and for encrypt/decrypt i came up with this solution:

public static byte[] generateKey(String password) throws Exception
{
    byte[] keyStart = password.getBytes("UTF-8");

    KeyGenerator kgen = KeyGenerator.getInstance("AES");
    SecureRandom sr = SecureRandom.getInstance("SHA1PRNG", "Crypto");
    sr.setSeed(keyStart);
    kgen.init(128, sr);
    SecretKey skey = kgen.generateKey();
    return skey.getEncoded();
}

public static byte[] encodeFile(byte[] key, byte[] fileData) throws Exception
{

    SecretKeySpec skeySpec = new SecretKeySpec(key, "AES");
    Cipher cipher = Cipher.getInstance("AES");
    cipher.init(Cipher.ENCRYPT_MODE, skeySpec);
    byte[] encrypted = cipher.doFinal(fileData);

    return encrypted;
}

public static byte[] decodeFile(byte[] key, byte[] fileData) throws Exception
{
    SecretKeySpec skeySpec = new SecretKeySpec(key, "AES");
    Cipher cipher = Cipher.getInstance("AES");
    cipher.init(Cipher.DECRYPT_MODE, skeySpec);

    byte[] decrypted = cipher.doFinal(fileData);

    return decrypted;
}

To save a encrypted file to sd do:

File file = new File(Environment.getExternalStorageDirectory() + File.separator + "your_folder_on_sd", "file_name");
BufferedOutputStream bos = new BufferedOutputStream(new FileOutputStream(file));
byte[] yourKey = generateKey("password");
byte[] filesBytes = encodeFile(yourKey, yourByteArrayContainigDataToEncrypt);
bos.write(fileBytes);
bos.flush();
bos.close();

To decode a file use:

byte[] yourKey = generateKey("password");
byte[] decodedData = decodeFile(yourKey, bytesOfYourFile);

For reading in a file to a byte Array there a different way out there. A Example: http://examples.javacodegeeks.com/core-java/io/fileinputstream/read-file-in-byte-array-with-fileinputstream/

Below is the solution with Kotlin.

You can copy your InputStream into ByteArray

val inputStream = ...

val byteOutputStream = ByteArrayOutputStream()
inputStream.use { input ->
    byteOutputStream.use { output ->
        input.copyTo(output)
    }
}

val byteInputStream = ByteArrayInputStream(byteOutputStream.toByteArray())

If you need to read the byteInputStream multiple times, call byteInputStream.reset() before reading again.

https://code.luasoftware.com/tutorials/kotlin/how-to-clone-inputstream/

Here's a a couple of useful link that I found when I started with JNI

http://en.wikipedia.org/wiki/Java_Native_Interface
http://download.oracle.com/javase/1.5.0/docs/guide/jni/spec/functions.html

concerning your problem you can use this

JNIEXPORT void JNICALL Java_ClassName_MethodName(JNIEnv *env, jobject obj, jstring javaString)   
{
   const char *nativeString = env->GetStringUTFChars(javaString, 0);

   // use your string

   env->ReleaseStringUTFChars(javaString, nativeString);
}

After calling an request, set timeout to initialize slick slider.

var options = {
    arrows: false,
    slidesToShow: 1,
    variableWidth: true,
    centerPadding: '10px'
}

$.ajax({
    type: "GET",
    url: review_url+"?page="+page,
    success: function(result){
        setTimeout(function () {
            $(".reviews-page-carousel").slick(options)
        }, 500);
    }
})

Do not initialize slick slider at start. Just initialize after an AJAX with timeout. That should work for you.

C# is a language, .NET is an application framework. The .NET libraries can run on the CLR and thus any language which can run on the CLR can also use the .NET libraries.

If you are familiar with Java, this is similar... Java is a language built on top of the JVM... though any of the pre-assembled Java libraries can be used by another language built on top of the JVM.

You can use the _filter method of lodash:

return _filter((item) => item.name.includes("fo"),tempObjectHolder);

I've written shyaml in python for YAML query needs from the shell command line.

Overview:

$ pip install shyaml      ## installation

Example's YAML file (with complex features):

$ cat <<EOF > test.yaml
name: "MyName !!"
subvalue:
    how-much: 1.1
    things:
        - first
        - second
        - third
    other-things: [a, b, c]
    maintainer: "Valentin Lab"
    description: |
        Multiline description:
        Line 1
        Line 2
EOF

Basic query:

$ cat test.yaml | shyaml get-value subvalue.maintainer
Valentin Lab

More complex looping query on complex values:

$ cat test.yaml | shyaml values-0 | \
  while read -r -d $'\0' value; do
      echo "RECEIVED: '$value'"
  done
RECEIVED: '1.1'
RECEIVED: '- first
- second
- third'
RECEIVED: '2'
RECEIVED: 'Valentin Lab'
RECEIVED: 'Multiline description:
Line 1
Line 2'

A few key points:

• all YAML types and syntax oddities are correctly handled, as multiline, quoted strings, inline sequences...
• \0 padded output is available for solid multiline entry manipulation.
• simple dotted notation to select sub-values (ie: subvalue.maintainer is a valid key).
• access by index is provided to sequences (ie: subvalue.things.-1 is the last element of the subvalue.things sequence.)
• access to all sequence/structs elements in one go for use in bash loops.
• you can output whole subpart of a YAML file as ... YAML, which blend well for further manipulations with shyaml.

More sample and documentation are available on the shyaml github page or the shyaml PyPI page.

I ran into this problem, which resolved itself after I stopped using a proxy. Maybe CloudFront is blacklisting some IPs.

On the offchance you accidentally lock yourself out of Jenkins due to a permission mistake, and you dont have server-side access to switch to the jenkins user or root... You can make a job in Jenkins and add this to the Shell Script:

sed -i 's/<useSecurity>true/<useSecurity>false/' ~/config.xml

Then click Build Now and restart Jenkins (or the server if you need to!)

This is how you do it:

var e = document.getElementById('myIdName');
var value = window.getComputedStyle(e, null).getPropertyValue("zIndex");
alert('z-index: ' + value);

Simply because this is the inheritance philosophy. And according to the Java language specification, this is how the constructor's body is defined:

ConstructorBody: { ExplicitConstructorInvocation_opt    BlockStatements_opt }

The first statement of a constructor body may be either

• an explicit invocation of another constructor of the same class (by using the keyword "this"); or
• an explicit invocation of the direct superclass (by using the keyword "super")

If a constructor body does not begin with an explicit constructor invocation and the constructor being declared is not part of the primordial class Object, then the constructor body implicitly begins with a superclass constructor invocation "super();", an invocation of the constructor of its direct superclass that takes no arguments. And so on.. there will be a whole chain of constructors called all the way back to the constructor of Object; "All Classes in the Java platform are Descendants of Object". This thing is called "Constructor Chaining".

Now why is this?
And the reason why Java defined the ConstructorBody in this way, is that they needed to maintain the hierarchy of the object. Remember the definition of the inheritance; It's extending a class. With that being said, you cannot extend something that doesn't exist. The base (the superclass) needs to be created first, then you can derive it (the subclass). That's why they called them Parent and Child classes; you can't have a child without a parent.

On a technical level, a subclass inherits all the members (fields, methods, nested classes) from its parent. And since Constructors are NOT members (They don't belong to objects. They are responsible of creating objects) so they are NOT inherited by subclasses, but they can be invoked. And since at the time of object creation only ONE constructor is executed. So how do we guarantee the creation of the superclass when you create the subclass object? Thus the concept of "constructor chaining"; so we have the ability to invoke other constructors (i.e. super) from within the current constructor. And Java required this invocation to be the FIRST line in the subclass constructor to maintain the hierarchy and guarantee it. They assume that if you don't explicitly create the parent object FIRST (like if you forgot about it), they will do it implicitly for you.

This check is done during compilation. But I'm not sure what would happen on runtime, what kind of runtime error we would get, IF Java doesn't throw a compile-error when we explicitly try to execute a base constructor from within a subclass's constructor in the middle of its body and not from the very first line ...

Example with no parameters:

delegate void NewEventHandler();
public event NewEventHandler OnEventHappens;

And from another class, you can subscribe to

otherClass.OnEventHappens += ExecuteThisFunctionWhenEventHappens;

And declare that function with no parameters.

Why not use

$iframe.load(function () {
    var $body = $('body', $iframe.get(0).contentWindow.document);
    $body.html(contentDiv);
});

instead of timer ?

Generally speaking:

all and any are functions that take some iterable and return True, if

• in the case of all(), no values in the iterable are falsy;
• in the case of any(), at least one value is truthy.

A value x is falsy iff bool(x) == False. A value x is truthy iff bool(x) == True.

Any non-booleans in the iterable will be fine — bool(x) will coerce any x according to these rules: 0, 0.0, None, [], (), [], set(), and other empty collections will yield False, anything else True. The docstring for bool uses the terms 'true'/'false' for 'truthy'/'falsy', and True/False for the concrete boolean values.

In your specific code samples:

You misunderstood a little bit how these functions work. Hence, the following does something completely not what you thought:

if any(foobars) == big_foobar:

...because any(foobars) would first be evaluated to either True or False, and then that boolean value would be compared to big_foobar, which generally always gives you False (unless big_foobar coincidentally happened to be the same boolean value).

Note: the iterable can be a list, but it can also be a generator/generator expression (˜ lazily evaluated/generated list) or any other iterator.

What you want instead is:

if any(x == big_foobar for x in foobars):

which basically first constructs an iterable that yields a sequence of booleans—for each item in foobars, it compares the item to big_foobar and emits the resulting boolean into the resulting sequence:

tmp = (x == big_foobar for x in foobars)

then any walks over all items in tmp and returns True as soon as it finds the first truthy element. It's as if you did the following:

In [1]: foobars = ['big', 'small', 'medium', 'nice', 'ugly']                                        

In [2]: big_foobar = 'big'                                                                          

In [3]: any(['big' == big_foobar, 'small' == big_foobar, 'medium' == big_foobar, 'nice' == big_foobar, 'ugly' == big_foobar])        
Out[3]: True

Note: As DSM pointed out, any(x == y for x in xs) is equivalent to y in xs but the latter is more readable, quicker to write and runs faster.

Some examples:

In [1]: any(x > 5 for x in range(4))
Out[1]: False

In [2]: all(isinstance(x, int) for x in range(10))
Out[2]: True

In [3]: any(x == 'Erik' for x in ['Erik', 'John', 'Jane', 'Jim'])
Out[3]: True

In [4]: all([True, True, True, False, True])
Out[4]: False

See also: http://docs.python.org/2/library/functions.html#all

Open Quickly...

• Command ? Shift ? D

• File > Open Quickly...

I'm a big fan of the Open Quickly feature, which is particularly good in Xcode 3.1 and later. When you want to open a file or a symbol definition that's in your project or in a framework, just hit the keyboard shortcut, type a bit of the file or symbol's name, use Up Arrow ? and Down Arrow ? to pick to the right result (if need be), and then hit Return ? to open the file or navigate to the symbol definition.

On Xcode 4:

• Command ? Shift ? o

Open Quickly uses the current word as a search term

Also, something I didn't know about Xcode until two minutes ago (when schwa pointed it out in a comment) is that, if the editor's text caret is inside of a word when Open Quickly is invoked, that word will be used as the Open Quickly search term.

Another way:

var := coalesce (var, 5);

COALESCE is the ANSI equivalent (more or less) of Oracle's NVL function.

Taking for granted that the JSON you posted is actually what you are seeing in the browser, then the problem is the JSON itself.

The JSON snippet you have posted is malformed.

You have posted:

[{
        "name" : "shopqwe",
        "mobiles" : [],
        "address" : {
            "town" : "city",
            "street" : "streetqwe",
            "streetNumber" : "59",
            "cordX" : 2.229997,
            "cordY" : 1.002539
        },
        "shoe"[{
                "shoeName" : "addidas",
                "number" : "631744030",
                "producent" : "nike",
                "price" : 999.0,
                "sizes" : [30.0, 35.0, 38.0]
            }]

while the correct JSON would be:

[{
        "name" : "shopqwe",
        "mobiles" : [],
        "address" : {
            "town" : "city",
            "street" : "streetqwe",
            "streetNumber" : "59",
            "cordX" : 2.229997,
            "cordY" : 1.002539
        },
        "shoe" : [{
                "shoeName" : "addidas",
                "number" : "631744030",
                "producent" : "nike",
                "price" : 999.0,
                "sizes" : [30.0, 35.0, 38.0]
            }
        ]
    }
]

just use a property

int  _theVariable;
public int TheVariable{
  get{return _theVariable;}
  set{
    _theVariable = value; 
    if ( _theVariable == 1){
      //Do stuff here.
    }
  }
}

you can use this code to hide the tool tip change its title and show the tooltip again, when the ajax request returns successfully.

$(element).tooltip('hide');
$(element).attr('title','this is new title');
$(element).tooltip('fixTitle');
setTimeout(function() {  $(element).tooltip('show');}, 500);

They are largely the same, except that:

The alias declaration is compatible with templates, whereas the C style typedef is not.

if you are in IIS you need to activate CORS in web.config, then you don't need to enable in App_Start/WebApiConfig.cs Register method

My solution was, commented the lines here:

// Enable CORS
//EnableCorsAttribute cors = new EnableCorsAttribute("*", "*", "*");
//config.EnableCors(cors);

and write in the web.config:

<system.webServer>
  <httpProtocol>
  <customHeaders>
    <add name="Access-Control-Allow-Origin" value="*" />
  </customHeaders>
</httpProtocol>

You're trying to write more data than a specific column can store. Check the sizes of the data you're trying to insert against the sizes of each of the fields.

In this case transaction_status is a varchar(10) and you're trying to store 19 characters to it.

I had the same problem and it turned out that the Json returned from the server wasn't valid Json-P. If you don't use the call as a crossdomain call use regular Json.

None of the other answers worked for me. Even after fixing my build path issues, doing a refresh, clean, rebuild, and restart (of both eclipse and the computer), I was still getting the little red exclamation point.

I fixed it by closing the project (right-click, close project) and reopening it (double-click the closed project), which seemed to force eclipse to "notice" that the build path problems had been corrected.

I just commented it and used androidx and now it's working all good!

import androidx.appcompat.app.AppCompatActivity;
// import android.support.v7.app.AppCompatActivity;

Late joining this conversation to shed light on a mildly interesting factoid for web-facing, analytics-aware websites. Passing the mic over to Michael Papworth:

https://github.com/michaelpapworth/jQuery.navigate

"When using website analytics, window.location is not sufficient due to the referer not being passed on the request. The plugin resolves this and allows for both aliased and parametrised URLs."

If one examines the code what it does is this:

   var methods = {
            'goTo': function (url) {
                // instead of using window.location to navigate away
                // we use an ephimeral link to click on and thus ensure
                // the referer (current url) is always passed on to the request
                $('<a></a>').attr("href", url)[0].click();
            },
            ...
   };

Neato!

You can use this code for bootstrap datepicker:

HTML Code:

<p>Date: <input type="text" id="datepicker" class="datepicker"></p>

Javascript:

$( ".datepicker" ).datepicker({
   format: 'yyyy-mm-dd'
});

If the error message is just

"Login failed for user 'NT AUTHORITY\NETWORK SERVICE'.", then grant the login permission for 'NT AUTHORITY\NETWORK SERVICE'

by using

"sp_grantlogin 'NT AUTHORITY\NETWORK SERVICE'" 

else if the error message is like

"Cannot open database "Phaeton.mdf" requested by the login. The login failed. Login failed for user 'NT AUTHORITY\NETWORK SERVICE'."

try using

"EXEC sp_grantdbaccess 'NT AUTHORITY\NETWORK SERVICE'" 

under your "Phaeton" database.

If you use the gradle-android-plugin to build your app, then you can use

BuildConfig.APPLICATION_ID

to retrieve the package name from any scope, incl. a static one.

For a very simple case like this, a comprehension, as in Ismail Badawi's answer is definitely the way to go.

But when things get more complicated, and you need to start writing multi-clause or nested comprehensions with complex expressions in them, it's worth looking into other alternatives. There are a few different (quasi-)standard ways to specify XPath-style searches on nested dict-and-list structures, such as JSONPath, DPath, and KVC. And there are nice libraries on PyPI for them.

Here's an example with the library named dpath, showing how it can simplify something just a bit more complicated:

>>> dd = {
...     'fruits': [{'value': 'apple', 'blah': 2}, {'value': 'banana', 'blah': 3}],
...     'vehicles': [{'value': 'cars', 'blah':4}]}

>>> {key: [{'value': d['value']} for d in value] for key, value in dd.items()}
{'fruits': [{'value': 'apple'}, {'value': 'banana'}],
 'vehicles': [{'value': 'cars'}]}

>>> dpath.util.search(dd, '*/*/value')
{'fruits': [{'value': 'apple'}, {'value': 'banana'}],
 'vehicles': [{'value': 'cars'}]}

Or, using jsonpath-ng:

>>> [d['value'] for key, value in dd.items() for d in value]
['apple', 'banana', 'cars']
>>> [m.value for m in jsonpath_ng.parse('*.[*].value').find(dd)]
['apple', 'banana', 'cars']

This one may not look quite as simple at first glance, because find returns match objects, which include all kinds of things besides just the matched value, such as a path directly to each item. But for more complex expressions, being able to specify a path like '*.[*].value' instead of a comprehension clause for each * can make a big difference. Plus, JSONPath is a language-agnostic specification, and there are even online testers that can be very handy for debugging.

I would do it something along these lines:

class Foo{
...
};

int main(){
  Foo* arrayOfFoo[100]; //[1]

  arrayOfFoo[0] = new Foo; //[2]
}

[1] This makes an array of 100 pointers to Foo-objects. But no Foo-objects are actually created.

[2] This is one possible way to instantiate an object, and at the same time save a pointer to this object in the first position of your array.

DateTime.ParseExact(monthName, "MMMM", CultureInfo.CurrentCulture ).Month

Although, for your purposes, you'll probably be better off just creating a Dictionary<string, int> mapping the month's name to its value.

Do you want your function to react to an array argument or variable arguments? If the latter, try:

var func = function(...rest) {
  alert(rest.length);

  // In JS, don't use for..in with arrays
  // use for..of that consumes array's pre-defined iterator
  // or a more functional approach
  rest.forEach((v) => console.log(v));
};

But if you wish to handle an array argument

var fn = function(arr) {
  alert(arr.length);

  for(var i of arr) {
    console.log(i);
  }
};

if you are looking to change the colour of the cell in case of vlookup error then go for conditional formatting . To do this go the "CONDITIONAL FORMATTING" > "NEW RULE". In this choose the "Select the rule type" = "Format only cells that contains" . After this the window below changes , in which choose "Error" in the first drop-down .After this proceed accordingly.

Officially, the SQL languages does not support a JOIN or FROM clause in an UPDATE statement unless it is in a subquery. Thus, the Hoyle ANSI approach would be something like

Update addresses
Set cid = (
            Select c.id
            From customers As c
            where c.id = a.id
            )
Where Exists    (
                Select 1
                From customers As C1
                Where C1.id = addresses.id
                )

However many DBMSs such Postgres support the use of a FROM clause in an UPDATE statement. In many cases, you are required to include the updating table and alias it in the FROM clause however I'm not sure about Postgres:

Update addresses
Set cid = c.id
From addresses As a
    Join customers As c
        On c.id = a.id

<div class="small hidden-xs">
    Some Content Here
</div>

This also works for elements not necessarily used in a grid /small column. When it is rendered on larger screens the font-size will be smaller than your default text font-size.

This answer satisfies the question in the OP title (which is how I found this Q/A).

You are getting this error because the Git remote already has these commit files. You have to force push the branch for this to work:

git push -f origin branch_name

Also make sure you pull the code from remote as someone else on your team might have pushed to the same branch.

git pull origin branch_name

This is one of the cases where we have to force push the commit to remote.

The simplest way to connect is through an OdbcConnection using code like this

using System.Data.Odbc;

using(OdbcConnection myConnection = new OdbcConnection())
{
    myConnection.ConnectionString = myConnectionString;
    myConnection.Open();

    //execute queries, etc

}

where myConnectionString is something like this

myConnectionString = @"Driver={Microsoft Access Driver (*.mdb)};" + 
"Dbq=C:\mydatabase.mdb;Uid=Admin;Pwd=;

See ConnectionStrings

In alternative you could create a DSN and then use that DSN in your connection string

• Open the Control Panel - Administrative Tools - ODBC Data Source Manager
• Go to the System DSN Page and ADD a new DSN
• Choose the Microsoft Access Driver (*.mdb) and press END
• Set the Name of the DSN (choose MyDSN for this example)
• Select the Database to be used
• Try the Compact or Recover commands to see if the connection works

now your connectionString could be written in this way

myConnectionString = "DSN=myDSN;"

You get a nice header output with the following command:

 curl -L -v -s -o /dev/null google.de

• -L, --location follow redirects
• -v, --verbose more output, indicates the direction
• -s, --silent don't show a progress bar
• -o, --output /dev/null don't show received body

Or the shorter version:

 curl -Lvso /dev/null google.de

Results in:

* Rebuilt URL to: google.de/
*   Trying 2a00:1450:4008:802::2003...
* Connected to google.de (2a00:1450:4008:802::2003) port 80 (#0)
> GET / HTTP/1.1
> Host: google.de
> User-Agent: curl/7.43.0
> Accept: */*
>
< HTTP/1.1 301 Moved Permanently
< Location: http://www.google.de/
< Content-Type: text/html; charset=UTF-8
< Date: Fri, 12 Aug 2016 15:45:36 GMT
< Expires: Sun, 11 Sep 2016 15:45:36 GMT
< Cache-Control: public, max-age=2592000
< Server: gws
< Content-Length: 218
< X-XSS-Protection: 1; mode=block
< X-Frame-Options: SAMEORIGIN
<
* Ignoring the response-body
{ [218 bytes data]
* Connection #0 to host google.de left intact
* Issue another request to this URL: 'http://www.google.de/'
*   Trying 2a00:1450:4008:800::2003...
* Connected to www.google.de (2a00:1450:4008:800::2003) port 80 (#1)
> GET / HTTP/1.1
> Host: www.google.de
> User-Agent: curl/7.43.0
> Accept: */*
>
< HTTP/1.1 200 OK
< Date: Fri, 12 Aug 2016 15:45:36 GMT
< Expires: -1
< Cache-Control: private, max-age=0
< Content-Type: text/html; charset=ISO-8859-1
< P3P: CP="This is not a P3P policy! See https://www.google.com/support/accounts/answer/151657?hl=en for more info."
< Server: gws
< X-XSS-Protection: 1; mode=block
< X-Frame-Options: SAMEORIGIN
< Set-Cookie: NID=84=Z0WT_INFoDbf_0FIe_uHqzL9mf3DMSQs0mHyTEDAQOGY2sOrQaKVgN2domEw8frXvo4I3x3QVLqCH340HME3t1-6gNu8R-ArecuaneSURXNxSXYMhW2kBIE8Duty-_w7; expires=Sat, 11-Feb-2017 15:45:36 GMT; path=/; domain=.google.de; HttpOnly
< Accept-Ranges: none
< Vary: Accept-Encoding
< Transfer-Encoding: chunked
<
{ [11080 bytes data]
* Connection #1 to host www.google.de left intact

As you can see curl outputs both the outgoing and the incoming headers and skips the bodydata althought telling you how big the body is.

Additionally for every line the direction is indicated so that it is easy to read. I found it particular useful to trace down long chains of redirects.

simple difference between for and foreach

  for loop is working with values.it must have condition then increment and intialization also.you have to knowledge about 'how many times loop repeated'.

 foreach is working with objects and enumaretors. no need to knowledge how many times loop repeated.

A table alias cannot start with a @. So, give @Temp another alias (or leave out the two-part naming altogether):

SELECT *
FROM @TEMP t
WHERE t.ID = 1;

Also, a single equals sign is traditionally used in SQL for a comparison.

Step 1 : Go to Files. Step 2 : Go to Folders. Step 3 : Create Assets Folder.

In Assets folder just put fonts and use it if needed.

You should've kept that DOM ready function

$(function() {
    $("#projectKey").change(function() {
        alert( $('option:selected', this).text() );
    });
});

The document isn't ready if you added the javascript before the elements in the DOM, you have to either use a DOM ready function or add the javascript after the elements, the usual place is right before the </body> tag

A single liner, using find:

find -type f -exec grep -lm1 "PATTERN" {} \; -a -quit

1. Unary plus given string converts to number
2. Increment operator given string converts and increments by 1
3. [] == ''. Empty String

4. +'' or +[] evaluates 0.

   ++[[]][+[]]+[+[]] = 10 
   ++[''][0] + [0] : First part is gives zeroth element of the array which is empty string 
   1+0 
   10
   

For PyCharm 2018.1 on Mac:

Preferences (?+,), then Editor -> Code Style:

For PyCharm 2018.3 on Windows:

File -> Settings (Ctrl+Alt+S), then Editor -> Code Style:

To follow PEP-8 set Hard wrap at to 80.

This is the most readily available, handy and useful way to do

freopen("dir","r",stdin);

I came across this thread while trying to clear the date already set. Attempting:

$('#datepicker').val('').datepicker('update');

produced:

TypeError: t.dpDiv is undefined 
https://ajax.googleapis.com/ajax/libs/jqueryui/1.11.2/jquery-ui.min.js -- Line 8

Thinking that perhaps one needed to include the original Datepicker for bootstrap removes the error, but then causes the original Datepicker widget to appear! - so that's obviously wrong and not needed.

Looking further, the crash in jqueryui is in:

    /* Generate the date picker content. */
_updateDatepicker: function(inst) {
    this.maxRows = 4; //Reset the max number of rows being displayed (see #7043)
    datepicker_instActive = inst; // for delegate hover events
    inst.dpDiv.empty().append(this._generateHTML(inst));
    this._attachHandlers(inst);

and inst.pdDiv does not exist.

Investigating further - I realized that what was needed was:

        $formControl = $duedate.find("input");
        $formControl.val('');
        $formControl.removeData();

Which solved my problem. Note I also needed the $formControl.removeData() otherwise the state of the widget would not be reinitialized to the initial state.

I hope this helps someone else. :-)

go to ~/.android if there is no debug.keystore copy it from your project and paste it here then run command again.

I'm guessing from your last question, asked 20 minutes before this one, that you are trying to parse (read and convert) the XML found through using GeoNames' FindNearestAddress.

If your XML is in a string variable called txt and looks like this:

<address>
  <street>Roble Ave</street>
  <mtfcc>S1400</mtfcc>
  <streetNumber>649</streetNumber>
  <lat>37.45127</lat>
  <lng>-122.18032</lng>
  <distance>0.04</distance>
  <postalcode>94025</postalcode>
  <placename>Menlo Park</placename>
  <adminCode2>081</adminCode2>
  <adminName2>San Mateo</adminName2>
  <adminCode1>CA</adminCode1>
  <adminName1>California</adminName1>
  <countryCode>US</countryCode>
</address>

Then you can parse the XML with Javascript DOM like this:

if (window.DOMParser)
{
    parser = new DOMParser();
    xmlDoc = parser.parseFromString(txt, "text/xml");
}
else // Internet Explorer
{
    xmlDoc = new ActiveXObject("Microsoft.XMLDOM");
    xmlDoc.async = false;
    xmlDoc.loadXML(txt);
}

And get specific values from the nodes like this:

//Gets house address number
xmlDoc.getElementsByTagName("streetNumber")[0].childNodes[0].nodeValue;

//Gets Street name
xmlDoc.getElementsByTagName("street")[0].childNodes[0].nodeValue;

//Gets Postal Code
xmlDoc.getElementsByTagName("postalcode")[0].childNodes[0].nodeValue;

JSFiddle

Feb. 2019 edit:

In response to @gaugeinvariante's concerns about xml with Namespace prefixes. Should you have a need to parse xml with Namespace prefixes, everything should work almost identically:

NOTE: this will only work in browsers that support xml namespace prefixes such as Microsoft Edge

// XML with namespace prefixes 's', 'sn', and 'p' in a variable called txt_x000D_
txt = `_x000D_
<address xmlns:p='example.com/postal' xmlns:s='example.com/street' xmlns:sn='example.com/streetNum'>_x000D_
  <s:street>Roble Ave</s:street>_x000D_
  <sn:streetNumber>649</sn:streetNumber>_x000D_
  <p:postalcode>94025</p:postalcode>_x000D_
</address>`;_x000D_
_x000D_
//Everything else the same_x000D_
if (window.DOMParser)_x000D_
{_x000D_
    parser = new DOMParser();_x000D_
    xmlDoc = parser.parseFromString(txt, "text/xml");_x000D_
}_x000D_
else // Internet Explorer_x000D_
{_x000D_
    xmlDoc = new ActiveXObject("Microsoft.XMLDOM");_x000D_
    xmlDoc.async = false;_x000D_
    xmlDoc.loadXML(txt);_x000D_
}_x000D_
_x000D_
//The prefix should not be included when you request the xml namespace_x000D_
//Gets "streetNumber" (note there is no prefix of "sn"_x000D_
console.log(xmlDoc.getElementsByTagName("streetNumber")[0].childNodes[0].nodeValue);_x000D_
_x000D_
//Gets Street name_x000D_
console.log(xmlDoc.getElementsByTagName("street")[0].childNodes[0].nodeValue);_x000D_
_x000D_
//Gets Postal Code_x000D_
console.log(xmlDoc.getElementsByTagName("postalcode")[0].childNodes[0].nodeValue);

You can also use a lambda expression

public string Type
{
    get => _type;
    set => _type = value;
}

This will show only Cart Items Count.

 global $woocommerce; 
    echo $woocommerce->cart->cart_contents_count;

No, you're re-initializing x in every loop. Change to:

int[] tall = new int[28123];
int x = 0;

for (int j = 1;j<=28123;j++){
    tall[x] = j;
    x++;
}

Or, even better (since x is always equal to j-1):

int[] tall = new int[28123];

for (int j = 1;j<=28123;j++){
    tall[j-1] = j;
}

If you are using the 'pylab' for interactive plotting you can set the labelsize at creation time with pylab.ylabel('Example', fontsize=40).

If you use pyplot programmatically you can either set the fontsize on creation with ax.set_ylabel('Example', fontsize=40) or afterwards with ax.yaxis.label.set_size(40).

The big thing to keep in mind is that your headers should not be dependent upon other headers being included first. One way to insure this is to include your headers before any other headers.

"Thinking in C++" in particular mentions this, referencing Lakos' "Large Scale C++ Software Design":

Latent usage errors can be avoided by ensuring that the .h file of a component parses by itself – without externally-provided declarations or definitions... Including the .h file as the very first line of the .c file ensures that no critical piece of information intrinsic to the physical interface of the component is missing from the .h file (or, if there is, that you will find out about it as soon as you try to compile the .c file).

That is to say, include in the following order:

1. The prototype/interface header for this implementation (ie, the .h/.hh file that corresponds to this .cpp/.cc file).
2. Other headers from the same project, as needed.
3. Headers from other non-standard, non-system libraries (for example, Qt, Eigen, etc).
4. Headers from other "almost-standard" libraries (for example, Boost)
5. Standard C++ headers (for example, iostream, functional, etc.)
6. Standard C headers (for example, cstdint, dirent.h, etc.)

If any of the headers have an issue with being included in this order, either fix them (if yours) or don't use them. Boycott libraries that don't write clean headers.

Google's C++ style guide argues almost the reverse, with really no justification at all; I personally tend to favor the Lakos approach.

My solutions in one of my own sites, with a table:

$.getJSON("sections/view_numbers_update.php", function(data) {
 $.each(data, function(index, objNumber) {
  $('#tr_' + objNumber.intID).find("td").eq(3).html(objNumber.datLastCalled);
  $('#tr_' + objNumber.intID).find("td").eq(4).html(objNumber.strStatus);
  $('#tr_' + objNumber.intID).find("td").eq(5).html(objNumber.intDuration);
  $('#tr_' + objNumber.intID).find("td").eq(6).html(objNumber.blnWasHuman);
 });
});

sections/view_numbers_update.php Returns something like:

[{"intID":"19","datLastCalled":"Thu, 10 Jan 13 08:52:20 +0000","strStatus":"Completed","intDuration":"0:04 secs","blnWasHuman":"Yes","datModified":1357807940},
{"intID":"22","datLastCalled":"Thu, 10 Jan 13 08:54:43 +0000","strStatus":"Completed","intDuration":"0:00 secs","blnWasHuman":"Yes","datModified":1357808079}]

HTML table:

<table id="table_numbers">
 <tr>
  <th>[...]</th>
  <th>[...]</th>
  <th>[...]</th>
  <th>Last Call</th>
  <th>Status</th>
  <th>Duration</th>
  <th>Human?</th>
  <th>[...]</th>
 </tr>
 <tr id="tr_123456">
  [...]
 </tr>
</table>

This essentially gives every row a unique id preceding with 'tr_' to allow for other numbered element ids, at server script time. The jQuery script then just gets this TR_[id] element, and fills the correct indexed cell with the json return.

The advantage is you could get the complete array from the DB, and either foreach($array as $record) to create the table html, OR (if there is an update request) you can die(json_encode($array)) before displaying the table, all in the same page, but same display code.

PROPS

A React component should use props to store information that can be changed, but can only be changed by a different component.

STATE

A React component should use state to store information that the component itself can change.

A good example is already provided by Valéry.

Add a try/catch block, if the transaction succeeds it will commit the changes, if the transaction fails the transaction is rolled back:

BEGIN TRANSACTION [Tran1]

  BEGIN TRY

      INSERT INTO [Test].[dbo].[T1] ([Title], [AVG])
      VALUES ('Tidd130', 130), ('Tidd230', 230)

      UPDATE [Test].[dbo].[T1]
      SET [Title] = N'az2' ,[AVG] = 1
      WHERE [dbo].[T1].[Title] = N'az'

      COMMIT TRANSACTION [Tran1]

  END TRY

  BEGIN CATCH

      ROLLBACK TRANSACTION [Tran1]

  END CATCH  

You can use any:

a_string = "A string is more than its parts!"
matches = ["more", "wholesome", "milk"]

if any(x in a_string for x in matches):

Similarly to check if all the strings from the list are found, use all instead of any.

For me, in Python 3, it's working simply in this way:

keep = keep.union((0,1,2,3,4,5,6,7,8,9,10))

I don't know if it may be correct...

I suppose https://get-ytt.io/ would be an acceptable solution to your problem

You don't need to. Just slap it on there as many times as you want and as often as you want. MDN explains identical event listeners:

If multiple identical EventListeners are registered on the same EventTarget with the same parameters, the duplicate instances are discarded. They do not cause the EventListener to be called twice, and they do not need to be removed manually with the removeEventListener method.

Put the tab name on the page header or group TableRow1 in your report so that it will appear in the "A1" position on each Excel sheet. Then run this macro in your Excel workbook.

Sub SelectSheet()
        For i = 1 To ThisWorkbook.Sheets.Count
        mysheet = "Sheet" & i
        On Error GoTo 10
        Sheets(mysheet).Select
        Set Target = Range("A1")
        If Target = "" Then Exit Sub
        On Error GoTo Badname
        ActiveSheet.Name = Left(Target, 31)
        GoTo 10
Badname:
        MsgBox "Please revise the entry in A1." & Chr(13) _
        & "It appears to contain one or more " & Chr(13) _
        & "illegal characters." & Chr(13)
        Range("A1").Activate
10
        Next i
End Sub

if I remember well... in query analyzer or equivalent:

BACKUP LOG  databasename  WITH TRUNCATE_ONLY

DBCC SHRINKFILE (  databasename_Log, 1)

I wanted to log all messages to root logger, and to have a separate log with errors, here is how it can be done:

<log4net>
    <appender name="FileAppender" type="log4net.Appender.FileAppender">
        <file value="allMessages.log" />
        <appendToFile value="true" />
        <layout type="log4net.Layout.PatternLayout">
            <conversionPattern value="%date  %-5level %logger  - %message%newline" />
        </layout>
    </appender>

    <appender name="ErrorsFileAppender" type="log4net.Appender.FileAppender">
        <file value="errorsLog.log" />
        <appendToFile value="true" />
        <layout type="log4net.Layout.PatternLayout">
            <conversionPattern value="%date  %-5level %logger  - %message%newline" />
        </layout>
        <filter type="log4net.Filter.LevelRangeFilter">
            <levelMin value="ERROR" />
            <levelMax value="FATAL" />
        </filter>
    </appender>

    <root>
        <level value="ALL" />
        <appender-ref ref="FileAppender" />
        <appender-ref ref="ErrorsFileAppender" />
    </root>
</log4net>

Notice the use of filter element.

There is no inherent reason that a simple batch file would run in XP but not Windows 10. It is possible you are referencing a command or a 3rd party utility that no longer exists. To know more about what is actually happening, you will need to do one of the following:

• Add a pause to the batch file so that you can see what is happening before it exits.
  1. Right click on one of the .bat files and select "edit". This will open the file in notepad.
  2. Go to the very end of the file and add a new line by pressing "enter".
  3. type pause.
  4. Save the file.
  5. Run the file again using the same method you did before.

- OR -

• Run the batch file from a static command prompt so the window does not close.
  1. In the folder where the .bat files are located, hold down the "shift" key and right click in the white space.
  2. Select "Open Command Window Here".
  3. You will now see a new command prompt. Type in the name of the batch file and press enter.

Once you have done this, I recommend creating a new question with the output you see after using one of the methods above.

git stash[save] takes your working directory state, and your index state, and stashes them away, setting index and working area to HEAD version.

git stash apply brings back those changes, so git reset --hard would remove them again.

git stash pop brings back those changes and removes top stashed change, so git stash [save] would return to previous (pre-pop) state in this case.

I'm offering some benchmarking results comparing the most prominent approaches presented so far, namely @bobince's findnth() (based on str.split()) vs. @tgamblin's or @Mark Byers' find_nth() (based on str.find()). I will also compare with a C extension (_find_nth.so) to see how fast we can go. Here is find_nth.py:

def findnth(haystack, needle, n):
    parts= haystack.split(needle, n+1)
    if len(parts)<=n+1:
        return -1
    return len(haystack)-len(parts[-1])-len(needle)

def find_nth(s, x, n=0, overlap=False):
    l = 1 if overlap else len(x)
    i = -l
    for c in xrange(n + 1):
        i = s.find(x, i + l)
        if i < 0:
            break
    return i

Of course, performance matters most if the string is large, so suppose we want to find the 1000001st newline ('\n') in a 1.3 GB file called 'bigfile'. To save memory, we would like to work on an mmap.mmap object representation of the file:

In [1]: import _find_nth, find_nth, mmap

In [2]: f = open('bigfile', 'r')

In [3]: mm = mmap.mmap(f.fileno(), 0, access=mmap.ACCESS_READ)

There is already the first problem with findnth(), since mmap.mmap objects don't support split(). So we actually have to copy the whole file into memory:

In [4]: %time s = mm[:]
CPU times: user 813 ms, sys: 3.25 s, total: 4.06 s
Wall time: 17.7 s

Ouch! Fortunately s still fits in the 4 GB of memory of my Macbook Air, so let's benchmark findnth():

In [5]: %timeit find_nth.findnth(s, '\n', 1000000)
1 loops, best of 3: 29.9 s per loop

Clearly a terrible performance. Let's see how the approach based on str.find() does:

In [6]: %timeit find_nth.find_nth(s, '\n', 1000000)
1 loops, best of 3: 774 ms per loop

Much better! Clearly, findnth()'s problem is that it is forced to copy the string during split(), which is already the second time we copied the 1.3 GB of data around after s = mm[:]. Here comes in the second advantage of find_nth(): We can use it on mm directly, such that zero copies of the file are required:

In [7]: %timeit find_nth.find_nth(mm, '\n', 1000000)
1 loops, best of 3: 1.21 s per loop

There appears to be a small performance penalty operating on mm vs. s, but this illustrates that find_nth() can get us an answer in 1.2 s compared to findnth's total of 47 s.

I found no cases where the str.find() based approach was significantly worse than the str.split() based approach, so at this point, I would argue that @tgamblin's or @Mark Byers' answer should be accepted instead of @bobince's.

In my testing, the version of find_nth() above was the fastest pure Python solution I could come up with (very similar to @Mark Byers' version). Let's see how much better we can do with a C extension module. Here is _find_nthmodule.c:

#include <Python.h>
#include <string.h>

off_t _find_nth(const char *buf, size_t l, char c, int n) {
    off_t i;
    for (i = 0; i < l; ++i) {
        if (buf[i] == c && n-- == 0) {
            return i;
        }
    }
    return -1;
}

off_t _find_nth2(const char *buf, size_t l, char c, int n) {
    const char *b = buf - 1;
    do {
        b = memchr(b + 1, c, l);
        if (!b) return -1;
    } while (n--);
    return b - buf;
}

/* mmap_object is private in mmapmodule.c - replicate beginning here */
typedef struct {
    PyObject_HEAD
    char *data;
    size_t size;
} mmap_object;

typedef struct {
    const char *s;
    size_t l;
    char c;
    int n;
} params;

int parse_args(PyObject *args, params *P) {
    PyObject *obj;
    const char *x;

    if (!PyArg_ParseTuple(args, "Osi", &obj, &x, &P->n)) {
        return 1;
    }
    PyTypeObject *type = Py_TYPE(obj);

    if (type == &PyString_Type) {
        P->s = PyString_AS_STRING(obj);
        P->l = PyString_GET_SIZE(obj);
    } else if (!strcmp(type->tp_name, "mmap.mmap")) {
        mmap_object *m_obj = (mmap_object*) obj;
        P->s = m_obj->data;
        P->l = m_obj->size;
    } else {
        PyErr_SetString(PyExc_TypeError, "Cannot obtain char * from argument 0");
        return 1;
    }
    P->c = x[0];
    return 0;
}

static PyObject* py_find_nth(PyObject *self, PyObject *args) {
    params P;
    if (!parse_args(args, &P)) {
        return Py_BuildValue("i", _find_nth(P.s, P.l, P.c, P.n));
    } else {
        return NULL;    
    }
}

static PyObject* py_find_nth2(PyObject *self, PyObject *args) {
    params P;
    if (!parse_args(args, &P)) {
        return Py_BuildValue("i", _find_nth2(P.s, P.l, P.c, P.n));
    } else {
        return NULL;    
    }
}

static PyMethodDef methods[] = {
    {"find_nth", py_find_nth, METH_VARARGS, ""},
    {"find_nth2", py_find_nth2, METH_VARARGS, ""},
    {0}
};

PyMODINIT_FUNC init_find_nth(void) {
    Py_InitModule("_find_nth", methods);
}

Here is the setup.py file:

from distutils.core import setup, Extension
module = Extension('_find_nth', sources=['_find_nthmodule.c'])
setup(ext_modules=[module])

Install as usual with python setup.py install. The C code plays at an advantage here since it is limited to finding single characters, but let's see how fast this is:

In [8]: %timeit _find_nth.find_nth(mm, '\n', 1000000)
1 loops, best of 3: 218 ms per loop

In [9]: %timeit _find_nth.find_nth(s, '\n', 1000000)
1 loops, best of 3: 216 ms per loop

In [10]: %timeit _find_nth.find_nth2(mm, '\n', 1000000)
1 loops, best of 3: 307 ms per loop

In [11]: %timeit _find_nth.find_nth2(s, '\n', 1000000)
1 loops, best of 3: 304 ms per loop

Clearly quite a bit faster still. Interestingly, there is no difference on the C level between the in-memory and mmapped cases. It is also interesting to see that _find_nth2(), which is based on string.h's memchr() library function, loses out against the straightforward implementation in _find_nth(): The additional "optimizations" in memchr() are apparently backfiring...

In conclusion, the implementation in findnth() (based on str.split()) is really a bad idea, since (a) it performs terribly for larger strings due to the required copying, and (b) it doesn't work on mmap.mmap objects at all. The implementation in find_nth() (based on str.find()) should be preferred in all circumstances (and therefore be the accepted answer to this question).

There is still quite a bit of room for improvement, since the C extension ran almost a factor of 4 faster than the pure Python code, indicating that there might be a case for a dedicated Python library function.

I agree that it is not possible in general.

The only thing CSS3 can do (which helped in my case) is to select elements that have no children:

table td:empty
{
   background-color: white;
}

Or have any children (including text):

table td:not(:empty)
{
   background-color: white;
}

Most of information here are correct.
Here a compilation of them and my way of using them.

The idea is to stick to the recommended approach (build specific and no impact on other stored docker objects) and to try the more radical approach (not build specific and with impact on other stored docker objects) when it is not enough.

Recommended approach :

1) Force the execution of each step/instruction in the Dockerfile :

docker build --no-cache 

or with docker-compose build :

docker-compose build --no-cache

We could also combine that to the up sub-command that recreate all containers:

docker-compose build --no-cache &&
docker-compose up -d --force-recreate 

These way don't use cache but for the docker builder and the base image referenced with the FROM instruction.

2) Wipe the docker builder cache (if we use Buildkit we very probably need that) :

docker builder prune -af

3) If we don't want to use the cache of the parent images, we may try to delete them such as :

docker image rm -f fooParentImage

In most of cases, these 3 things are perfectly enough to allow a clean build of our image.
So we should try to stick to that.

More radical approach :

In corner cases where it seems that some objects in the docker cache are still used during the build and that looks repeatable, we should try to understand the cause to be able to wipe the missing part very specifically. If we really don't find a way to rebuild from scratch, there are other ways but it is important to remember that these generally delete much more than it is required. So we should use them with cautious overall when we are not in a local/dev environment.

1) Remove all images without at least one container associated to them :

docker image prune -a

2) Remove many more things :

docker system prune -a

That says :

WARNING! This will remove:
  - all stopped containers
  - all networks not used by at least one container
  - all images without at least one container associated to them
  - all build cache

Using that super delete command may not be enough because it strongly depends on the state of containers (running or not). When that command is not enough, I try to think carefully which docker containers could cause side effects to our docker build and to allow these containers to be exited in order to allow them to be removed with the command.

I was having the same problem in localhost with xampp. Now I'm using this combination of parameters:

// Report all errors except E_NOTICE
// This is the default value set in php.ini
error_reporting(E_ALL ^ E_NOTICE);

php.net: http://php.net/manual/pt_BR/function.error-reporting.php

Using the standard library has many benefits, but one must be aware of some special cases that cause exceptions. For example, none of the answers covered the case where a C++ string has some Unicode characters. In this case, if you use the function isspace, an exception will be thrown.

I have been using the following code for trimming the strings and some other operations that might come in handy. The major benefits of this code are: it is really fast (faster than any code I have ever tested), it only uses the standard library, and it never causes an exception:

#include <string>
#include <algorithm>
#include <functional>
#include <locale>
#include <iostream>

typedef unsigned char BYTE;

std::string strTrim(std::string s, char option = 0)
{
    // convert all whitespace characters to a standard space
    std::replace_if(s.begin(), s.end(), (std::function<int(BYTE)>)::isspace, ' ');

    // remove leading and trailing spaces
    size_t f = s.find_first_not_of(' ');
    if (f == std::string::npos) return "";
    s = s.substr(f, s.find_last_not_of(' ') - f + 1);

    // remove consecutive spaces
    s = std::string(s.begin(), std::unique(s.begin(), s.end(),
        [](BYTE l, BYTE r){ return l == ' ' && r == ' '; }));

    switch (option)
    {
    case 'l':  // convert to lowercase
        std::transform(s.begin(), s.end(), s.begin(), ::tolower);
        return s;
    case 'U':  // convert to uppercase
        std::transform(s.begin(), s.end(), s.begin(), ::toupper);
        return s;
    case 'n':  // remove all spaces
        s.erase(std::remove(s.begin(), s.end(), ' '), s.end());
        return s;
    default: // just trim
        return s;
    }
}

The great thing about yyyy-mm-dd date format is that there is no need to extract month() and year(), you can do comparisons directly on strings:

SELECT *
  FROM your_table
  WHERE your_date_column >= '2010-09-01' AND your_date_column <= '2013-08-31';

The simplest solution to run your script under virtualenv's interpreter is to replace the default shebang line with path to your virtualenv's interpreter like so at the beginning of the script:

#!/path/to/project/venv/bin/python

Make the script executable:

chmod u+x script.py

Run the script:

./script.py

Voila!

You could add another empty layout below that one and set them both to have the same layout weight. They should get 50% of the space each.

Swift 2.1 - Xcode 7

let labelFont = UIFont(name: "HelveticaNeue-Bold", size: 18)
let attributes :[String:AnyObject] = [NSFontAttributeName : labelFont!]
let attrString = NSAttributedString(string:"foo", attributes: attributes)
myLabel.attributedText = attrString

I used this:

yum install unixODBC.x86_64

Depending on the version of centos could change the package, you can search like this:

yum search unixodbc

I think your basic issue here is that you're misinterpreting and/or misunderstanding what git does and why it does it.

When you clone some other repository, git makes a copy of whatever is "over there". It also takes "their" branch labels, such as master, and makes a copy of that label whose "full name" in your git tree is (normally) remotes/origin/master (but in your case, remotes/upstream/master). Most of the time you get to omit the remotes/ part too, so you can refer to that original copy as upstream/master.

If you now make and commit some change(s) to some file(s), you're the only one with those changes. Meanwhile other people may use the original repository (from which you made your clone) to make other clones and change those clones. They are the only ones with their changes, of course. Eventually though, someone may have changes they send back to the original owner (via "push" or patches or whatever).

The git pull command is mostly just shorthand for git fetch followed by git merge. This is important because it means you need to understand what those two operations actually do.

The git fetch command says to go back to wherever you cloned from (or have otherwise set up as a place to fetch from) and find "new stuff someone else added or changed or removed". Those changes are copied over and applied to your copy of what you got from them earlier. They are not applied to your own work, only to theirs.

The git merge command is more complicated and is where you are going awry. What it does, oversimplified a bit, is compare "what you changed in your copy" to "changes you fetched from someone-else and thus got added to your-copy-of-the-someone-else's-work". If your changes and their changes don't seem to conflict, the merge operation mushes them together and gives you a "merge commit" that ties your development and their development together (though there is a very common "easy" case in which you have no changes and you get a "fast forward").

The situation you're encountering now is one in which you have made changes and committed them—nine times, in fact, hence the "ahead 9"—and they have made no changes. So, fetch dutifully fetches nothing, and then merge takes their lack-of-changes and also does nothing.

What you want is to look at, or maybe even "reset" to, "their" version of the code.

If you merely want to look at it, you can simply check out that version:

git checkout upstream/master

That tells git that you want to move the current directory to the branch whose full name is actually remotes/upstream/master. You'll see their code as of the last time you ran git fetch and got their latest code.

If you want to abandon all your own changes, what you need to do is change git's idea of which revision your label, master, should name. Currently it names your most recent commit. If you get back onto that branch:

git checkout master

then the git reset command will allow you to "move the label", as it were. The only remaining problem (assuming you're really ready to abandon everything you've don) is finding where the label should point.

git log will let you find the numeric names—those things like 7cfcb29—which are permanent (never changing) names, and there are a ridiculous number of other ways to name them, but in this case you just want the name upstream/master.

To move the label, wiping out your own changes (any that you have committed are actually recoverable for quite a while but it's a lot harder after this so be very sure):

git reset --hard upstream/master

The --hard tells git to wipe out what you have been doing, move the current branch label, and then check out the given commit.

It's not super-common to really want to git reset --hard and wipe out a bunch of work. A safer method (making it a lot easier to recover that work if you decide some of it was worthwhile after all) is to rename your existing branch:

git branch -m master bunchofhacks

and then make a new local branch named master that "tracks" (I don't really like this term as I think it confuses people but that's the git term :-) ) the origin (or upstream) master:

git branch -t master upstream/master

which you can then get yourself on with:

git checkout master

What the last three commands do (there's shortcuts to make it just two commands) is to change the name pasted on the existing label, then make a new label, then switch to it:

before doing anything:

C0 -    "remotes/upstream/master"
    \
     \- C1 --- C2 --- C3 --- C4 --- C5 --- C6 --- C7 --- C8 --- C9    "master"

after git branch -m:

C0 -    "remotes/upstream/master"
    \
     \- C1 --- C2 --- C3 --- C4 --- C5 --- C6 --- C7 --- C8 --- C9    "bunchofhacks"

after git branch -t master upstream/master:

C0 -    "remotes/upstream/master", "master"
    \
     \- C1 --- C2 --- C3 --- C4 --- C5 --- C6 --- C7 --- C8 --- C9    "bunchofhacks"

Here C0 is the latest commit (a complete source tree) that you got when you first did your git clone. C1 through C9 are your commits.

Note that if you were to git checkout bunchofhacks and then git reset --hard HEAD^^, this would change the last picture to:

C0 -    "remotes/upstream/master", "master"
    \
     \- C1 --- C2 --- C3 --- C4 --- C5 --- C6 --- C7 -    "bunchofhacks"
                                                      \
                                                       \- C8 --- C9

The reason is that HEAD^^ names the revision two up from the head of the current branch (which just before the reset would be bunchofhacks), and reset --hard then moves the label. Commits C8 and C9 are now mostly invisible (you can use things like the reflog and git fsck to find them but it's no longer trivial). Your labels are yours to move however you like. The fetch command takes care of the ones that start with remotes/. It's conventional to match "yours" with "theirs" (so if they have a remotes/origin/mauve you'd name yours mauve too), but you can type in "theirs" whenever you want to name/see commits you got "from them". (Remember that "one commit" is an entire source tree. You can pick out one specific file from one commit, with git show for instance, if and when you want that.)

In Python we can use the __str__() method.

We can override it in our class like this:

class User: 

    firstName = ''
    lastName = ''
    ...

    def __str__(self):
        return self.firstName + " " + self.lastName

and when running

print(user)

it will call the function __str__(self) and print the firstName and lastName

If you are only concerned with the constant True, a simple sum is fine. However, keep in mind that in Python other values evaluate as True as well. A more robust solution would be to use the bool builtin:

>>> l = [1, 2, True, False]
>>> sum(bool(x) for x in l)
3

UPDATE: Here's another similarly robust solution that has the advantage of being more transparent:

>>> sum(1 for x in l if x)
3

P.S. Python trivia: True could be true without being 1. Warning: do not try this at work!

>>> True = 2
>>> if True: print('true')
... 
true
>>> l = [True, True, False, True]
>>> sum(l)
6
>>> sum(bool(x) for x in l)
3
>>> sum(1 for x in l if x)
3

Much more evil:

True = False

Here is how you do in Eloquent

$users = User::whereIn('id', array(1, 2, 3))->get();

And if you are using Query builder then :

$users = DB::table('users')->whereIn('id', array(1, 2, 3))->get();

Instead of using FileWriter, create a FileOutputStream. You can then wrap this in an OutputStreamWriter, which allows you to pass an encoding in the constructor. Then you can write your data to that inside a try-with-resources Statement:

try (OutputStreamWriter writer =
             new OutputStreamWriter(new FileOutputStream(PROPERTIES_FILE), StandardCharsets.UTF_8))
    // do stuff
}

Create an SSLSocket factory yourself, and set it on the HttpsURLConnection before connecting.

...
HttpsURLConnection conn = (HttpsURLConnection)url.openConnection();
conn.setSSLSocketFactory(sslFactory);
conn.setMethod("POST");
...

You'll want to create one SSLSocketFactory and keep it around. Here's a sketch of how to initialize it:

/* Load the keyStore that includes self-signed cert as a "trusted" entry. */
KeyStore keyStore = ... 
TrustManagerFactory tmf = 
  TrustManagerFactory.getInstance(TrustManagerFactory.getDefaultAlgorithm());
tmf.init(keyStore);
SSLContext ctx = SSLContext.getInstance("TLS");
ctx.init(null, tmf.getTrustManagers(), null);
sslFactory = ctx.getSocketFactory();

If you need help creating the key store, please comment.

Here's an example of loading the key store:

KeyStore keyStore = KeyStore.getInstance(KeyStore.getDefaultType());
keyStore.load(trustStore, trustStorePassword);
trustStore.close();

To create the key store with a PEM format certificate, you can write your own code using CertificateFactory, or just import it with keytool from the JDK (keytool won't work for a "key entry", but is just fine for a "trusted entry").

keytool -import -file selfsigned.pem -alias server -keystore server.jks

coonstructors are called automatically when you create a new object, thereby "constructing" the object. The reason you can have more than one init is because names are just references in python, and you are allowed to change what each variable references whenever you want (hence dynamic typing)

def func(): #now func refers to an empty funcion
    pass
...
func=5      #now func refers to the number 5
def func():
    print "something"    #now func refers to a different function

in your class definition, it just keeps the later one

I am a little late but I used this:

dir /B *.* > dir_file.txt

then you can make a simple FOR loop to extract the file name and use them. e.g:

for /f "tokens=* delims= " %%a in (dir_file.txt) do (
gawk -f awk_script_file.awk %%a
)

or store them into Vars (!N1!, !N2!..!Nn!) for later use. e.g:

set /a N=0
for /f "tokens=* delims= " %%a in (dir_file.txt) do (
set /a N+=1
set v[!N!]=%%a
)

It provides nothing else but a standardization of the data. The values it creates are known under several different names, one of them being z-scores ("Z" because the normal distribution is also known as the "Z distribution").

More can be found here:

http://en.wikipedia.org/wiki/Standard_score

Let's say you additionally want the week to begin on Monday (instead of default on Sunday), then the following is helpful:

require(lubridate)
df$day = ifelse(wday(df$time)==1,6,wday(df$time)-2)

The result is the days in the interval [0,..,6].

If you want the interval to be [1,..7], use the following:

df$day = ifelse(wday(df$time)==1,7,wday(df$time)-1)

... or, alternatively:

df$day = df$day + 1

Creating a data.table with key=V1 automatically does this for you. Using Stephan's data foo

> require(data.table)
> foo.dt <- data.table(foo, key="V1")
> foo.dt
   V1  V2
1:  1 349
2:  1 393
3:  1 392
4:  2  94
5:  3  49
6:  3  32
7:  4 459

With modern Python Exceptions, you don't need to abuse .message, or override .__str__() or .__repr__() or any of it. If all you want is an informative message when your exception is raised, do this:

class MyException(Exception):
    pass

raise MyException("My hovercraft is full of eels")

That will give a traceback ending with MyException: My hovercraft is full of eels.

If you want more flexibility from the exception, you could pass a dictionary as the argument:

raise MyException({"message":"My hovercraft is full of animals", "animal":"eels"})

However, to get at those details in an except block is a bit more complicated. The details are stored in the args attribute, which is a list. You would need to do something like this:

try:
    raise MyException({"message":"My hovercraft is full of animals", "animal":"eels"})
except MyException as e:
    details = e.args[0]
    print(details["animal"])

It is still possible to pass in multiple items to the exception and access them via tuple indexes, but this is highly discouraged (and was even intended for deprecation a while back). If you do need more than a single piece of information and the above method is not sufficient for you, then you should subclass Exception as described in the tutorial.

class MyError(Exception):
    def __init__(self, message, animal):
        self.message = message
        self.animal = animal
    def __str__(self):
        return self.message

Practical = 'useful in practice' - so the best you're going to get is anecdotal. Everything else is just prototyping and testing results.

I agree with others - determining 'a max quantity of records' is completely dependent on schema - # tables, # fields, # indexes.

Another anecdote for you: I recently hit 1.6GB file size with 2 primary data stores (tables), of 36 and 85 fields respectively, with some subset copies in 3 additional tables.

Who cares if data is unique or not - only material if context says it is. Data is data is data, unless duplication affects handling by the indexer.

The total row counts making up that 1.6GB is 1.72M.

You need to load the URL Helper in order to use base_url(). In your controller, do:

$this->load->helper('url');

Then in your view you can do:

echo base_url();

You can convert jar to exe using jar2exe. However you need to purchase the software. If you need a open source software i would suggest JSmooth.

On MAC OS X Leopard and higher

cd /etc/paths.d

There may be a text file in the above directory that contains the path you are trying to remove.

vim textfile //check and see what is in it when you are done looking type :q 
//:q just quits, no saves

If its the one you want to remove do this

rm textfile //remove it, delete it

Here is a link to a site that has more info on it, even though it illustrates 'adding' the path. However, you may gain some insight.

using (var client = new WebClient())
{
    client.DownloadFile("http://example.com/file/song/a.mpeg", "a.mpeg");
}

You should create new SSH key set for that Docker image, as you probably don't want to embed there your own private key. To make it work, you'll have to add that key to deployment keys in your git repository. Here's complete recipe:

1. Generate ssh keys with ssh-keygen -q -t rsa -N '' -f repo-key which will give you repo-key and repo-key.pub files.

2. Add repo-key.pub to your repository deployment keys.
   On GitHub, go to [your repository] -> Settings -> Deploy keys

3. Add something like this to your Dockerfile:

   ADD repo-key /
   RUN \
     chmod 600 /repo-key && \  
     echo "IdentityFile /repo-key" >> /etc/ssh/ssh_config && \  
     echo -e "StrictHostKeyChecking no" >> /etc/ssh/ssh_config && \  
     // your git clone commands here...
   

Note that above switches off StrictHostKeyChecking, so you don't need .ssh/known_hosts. Although I probably like more the solution with ssh-keyscan in one of the answers above.

Below are the methods which have always worked for me

1. By using flex layout model:

Set the display of the parent div to display: flex; and the you can align the child elements inside the div using the justify-content: center; (to align the items on main axis) and align-items: center; (to align the items on cross axis).

If you have more than one child element and want to control the way they are arranged (column/rows), then you can also add flex-direction property.

Working example:

.parent {_x000D_
  align-items: center;_x000D_
  border: 1px solid black;_x000D_
  display: flex;_x000D_
  justify-content: center;_x000D_
  height: 250px;_x000D_
  width: 250px;_x000D_
}_x000D_
_x000D_
.child {_x000D_
  border: 1px solid black;_x000D_
  height: 50px;_x000D_
  width: 50px;_x000D_
}

<div class="parent">_x000D_
  <div class="child"></div>_x000D_
</div>

2. (older method) Using position, margin properties and fixed size

Working example:

.parent {_x000D_
  border: 1px solid black;_x000D_
  height: 250px;_x000D_
  position: relative;_x000D_
  width: 250px;_x000D_
}_x000D_
_x000D_
.child {_x000D_
  border: 1px solid black;_x000D_
  margin: auto;_x000D_
  top: 0;_x000D_
  bottom: 0;_x000D_
  left: 0;_x000D_
  right: 0;_x000D_
  height: 50px;_x000D_
  position: absolute;_x000D_
  width: 50px;_x000D_
}

<div class="parent">_x000D_
  <div class="child"></div>_x000D_
</div>

I found the solution, Problem started when I updated sdk, after that I used different buildToolsVersion ('22.0.1') and I was using different support library like compile 'com.android.support:appcompat-v7:23.0.0', showing you in image below

This was raising problem of "android.widget.Material..." Then I used same version for support library like compile 'com.android.support:appcompat-v7:22.0.1' and its DONE. (Showing you in below screenshot)

Reason is as @MilicaMedic says. Alternative solution is disable all constraints, do the update and then enable the constraints again like this. Very useful when updating test data in test environments.

exec sp_MSforeachtable "ALTER TABLE ? NOCHECK CONSTRAINT all"

update patient set id_no='7008255601088' where id_no='8008255601088'
update patient_address set id_no='7008255601088' where id_no='8008255601088'

exec sp_MSforeachtable "ALTER TABLE ? WITH CHECK CHECK CONSTRAINT all"

Source:

https://stackoverflow.com/a/161410/3850405

Double quote (" ") the entire URL .It works.

curl "http://www.mysite.com?name=john&passwd=@31&3*J"

In your app delegate use bellow code

import UIKit
import UserNotifications
@UIApplicationMain
class AppDelegate: UIResponder, UIApplicationDelegate, UNUserNotificationCenterDelegate {
 var currentToken: String?
 var window: UIWindow?
 func application(_ application: UIApplication, didFinishLaunchingWithOptions launchOptions: [UIApplicationLaunchOptionsKey: Any]?) -> Bool {
        // Override point for customization after application launch.
        application.registerForRemoteNotifications()
        let center = UNUserNotificationCenter.current()
        center.requestAuthorization(options: [.alert, .sound, .badge]) { (granted, error) in

            // Enable or disable features based on authorization.
            if granted == true
            {
                print("Allow")
                UIApplication.shared.registerForRemoteNotifications()
            }
            else
            {
                print("Don't Allow")
            }
        }
        UNUserNotificationCenter.current().delegate = self

        return true
    }
func application(_ application: UIApplication, didRegisterForRemoteNotificationsWithDeviceToken deviceToken: Data){
        let tokenParts = deviceToken.map { data -> String in
            return String(format: "%02.2hhx", data)
        }
        let token = tokenParts.joined()
        currentToken = token  //get device token to delegate variable

    }
 public class var shared: AppDelegate {
        return UIApplication.shared.delegate as! AppDelegate
    }
 func userNotificationCenter(_ center: UNUserNotificationCenter, willPresent notification: UNNotification, withCompletionHandler completionHandler: @escaping (UNNotificationPresentationOptions) -> Void) {
         completionHandler([.alert, .badge, .sound])
    }
}

Add the below to your manifest:

  <activity   android:name=".AppPreferenceActivity" android:label="@string/app_name">  
     <intent-filter> 
       <action android:name="com.scytec.datamobile.vd.gui.android.AppPreferenceActivity" />  
       <category android:name="android.intent.category.DEFAULT" />  
     </intent-filter>   
  </activity>

Sorry, i don't have enough reputation to comment on the @Matyas answer, but if the svg's image is also in base64, it will be drawed to the output.

Demo:

var svg = document.querySelector('svg');_x000D_
var img = document.querySelector('img');_x000D_
var canvas = document.querySelector('canvas');_x000D_
_x000D_
// get svg data_x000D_
var xml = new XMLSerializer().serializeToString(svg);_x000D_
_x000D_
// make it base64_x000D_
var svg64 = btoa(xml);_x000D_
var b64Start = 'data:image/svg+xml;base64,';_x000D_
_x000D_
// prepend a "header"_x000D_
var image64 = b64Start + svg64;_x000D_
_x000D_
// set it as the source of the img element_x000D_
img.onload = function() {_x000D_
    // draw the image onto the canvas_x000D_
    canvas.getContext('2d').drawImage(img, 0, 0);_x000D_
}_x000D_
img.src = image64;

svg, img, canvas {_x000D_
  display: block;_x000D_
}

SVG_x000D_
_x000D_
<svg height="40">_x000D_
  <rect width="40" height="40" style="fill:rgb(255,0,255);" />_x000D_
  <image xlink:href="data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAABQAAAAUCAYAAACNiR0NAAAEX0lEQVQ4jUWUyW6cVRCFv7r3/kO3u912nNgZgESAAgGBCJgFgxhW7FkgxAbxMLwBEmIRITbsQAgxCEUiSIBAYIY4g1EmYjuDp457+Lv7n+4tFjbwAHVOnVPnlLz75ht67OhhZg/M0p6d5tD9C8SNBBs5XBJhI4uNLC4SREA0UI9yJr2c4e6QO+v3WF27w+rmNrv9Pm7hxDyHFg5yYGEOYxytuRY2SYiSCIwgRgBQIxgjEAKuZWg6R9S0SCS4qKLZElY3HC5tp7QPtmlMN7HOETUTXBJjrEGsAfgPFECsQbBIbDGJZUYgGE8ugQyPm+o0STtTuGZMnKZEjRjjLIgAirEOEQEBDQFBEFFEBWLFtVJmpENRl6hUuFanTRAlbTeZarcx0R6YNZagAdD/t5N9+QgCYAw2jrAhpjM3zaSY4OJGTDrVwEYOYw2qioigoviq5MqF31m9fg1V5fCx+zn11CLNVnufRhBrsVFE1Ihpthu4KDYYwz5YQIxFBG7duMZnH31IqHL6wwnGCLFd4pez3/DaG2/x4GNPgBhEZG/GGlxkMVFkiNMYay3Inqxed4eP33uf7Y0uu90xWkGolFAru7sZn5w5w921m3u+su8vinEO02hEWLN/ANnL2rkvv2an2yd4SCKLM0JVBsCgAYZZzrnPP0eDRzXgfaCuPHXwuEYjRgmIBlQVVLl8/hKI4fRzz3L6uWe5+PMvnHz6aa4uX+D4yYe5vXaLH86eoyoLjLF476l9oKo9pi5HWONRX8E+YznOef7Vl1h86QWurlwjbc+QpikPPfoIcZLS39pmMikp8pzae6q6oqgriqrGqS+xeLScoMYSVJlfOMTl5RXW1+5w5fJVnFGWf1/mxEMnWPppiclkTLM5RdJoUBYFZVlQ5DnZMMMV167gixKLoXXsKGqnOHnqOJ/+/CfZ+XUiZ0jTmFv5mAvf/YjEliQ2vPD8Ir6qqEcZkzt38cMRo5WruFvfL9FqpyRxQhj0qLOax5I2S08+Tu/lFiGUGOPormxwuyfMnjrGrJa88uIixeYWl776lmrzNjmw8vcG8sU7ixpHMXFsCUVg9tABjEvRgzP82j7AhbyiX5Qcv2+Bvy7dYGZ1k7efeQB/Y4PBqGBtdYvb3SFzLcfqToZc/OB1zYeBSpUwLBlvjZidmWaSB1yaYOfn6LqI/r0hyU6P+cRSlhXjbEI2zvnt7y79oqQ3qeg4g6vKjCIXehtDmi6m0UnxVnCRkPUHVNt9qkLJxgXOCYNOg34v48raPaamU2o89/KKsQ9sTSpc0JK7NwdcX8s43Ek5cnSOLC/Z2R6Rj0ra0w2W1/t0xyWn51uk2Ri1QtSO6OU5d7OSi72cQeWxKG7p/Dp//JXTy6C1Pcbc6DMpPRtjTxChEznWhwVZUCKrjCrPoPDczHLmnLBdBgZlRRWUEBR3ZKrme5TlrTGlV440Y1IrXM9qQGi6mkG5V6uza7tUIeCDElTZ1L26elX+fcH/ACJBPYTJ4X8tAAAAAElFTkSuQmCC" height="20px" width="20px" x="10" y="10"></image>_x000D_
</svg>_x000D_
<hr/><br/>_x000D_
_x000D_
IMAGE_x000D_
<img/>_x000D_
<hr/><br/>_x000D_
   _x000D_
CANVAS_x000D_
<canvas></canvas>_x000D_
<hr/><br/>

You should look into Java's interfaces. A quick Google search revealed this page, which looks pretty good.

I like to think of an interface as a "promise" of sorts: Any class that implements it has certain behavior that can be expected of it, and therefore you can put an instance of an implementing class into an interface-type reference.

A simple example is the java.lang.Comparable interface. By implementing all methods in this interface in your own class, you are claiming that your objects are "comparable" to one another, and can be partially ordered.

Implementing an interface requires two steps:

1. Declaring that the interface is implemented in the class declaration
2. Providing definitions for ALL methods that are part of the interface.

Interface java.lang.Comparable has just one method in it, public int compareTo(Object other). So you need to provide that method.

Here's an example. Given this class RationalNumber:

public class RationalNumber
{
    public int numerator;
    public int denominator;

    public RationalNumber(int num, int den)
    {
        this.numerator = num;
        this.denominator = den;
    }
}

(Note: It's generally bad practice in Java to have public fields, but I am intending this to be a very simple plain-old-data type so I don't care about public fields!)

If I want to be able to compare two RationalNumber instances (for sorting purposes, maybe?), I can do that by implementing the java.lang.Comparable interface. In order to do that, two things need to be done: provide a definition for compareTo and declare that the interface is implemented.

Here's how the fleshed-out class might look:

public class RationalNumber implements java.lang.Comparable
{
    public int numerator;
    public int denominator;

    public RationalNumber(int num, int den)
    {
        this.numerator = num;
        this.denominator = den;
    }

    public int compareTo(Object other)
    {
        if (other == null || !(other instanceof RationalNumber))
        {
            return -1; // Put this object before non-RationalNumber objects
        }

        RationalNumber r = (RationalNumber)other;

        // Do the calculations by cross-multiplying. This isn't really important to
        // the answer, but the point is we're comparing the two rational numbers.
        // And no, I don't care if it's mathematically inaccurate.

        int myTotal = this.numerator * other.denominator;
        int theirTotal = other.numerator * this.denominator;

        if (myTotal < theirTotal) return -1;
        if (myTotal > theirTotal) return 1;
        return 0;
    }
}

You're probably thinking, what was the point of all this? The answer is when you look at methods like this: sorting algorithms that just expect "some kind of comparable object". (Note the requirement that all objects must implement java.lang.Comparable!) That method can take lists of ANY kind of comparable objects, be they Strings or Integers or RationalNumbers.

NOTE: I'm using practices from Java 1.4 in this answer. java.lang.Comparable is now a generic interface, but I don't have time to explain generics.

On unix, you can use the ps tool to monitor it:

$ ps u -p 1347 | awk '{sum=sum+$6}; END {print sum/1024}'

where 1347 is some process id. Also, the result is in MB.

For me it worked as Kumar Jaggal but: steps 1, 2, 3, the same 4. py -m setup.py install

I tried @Mr. Stark answer. It didn't work. It failed to install the drive. I have Samsung S8 plus. I enabled the debugging mode on device then installed Android USB Driver for Windows from Samsung site, it works.

Every SQL batch has to fit in the Batch Size Limit: 65,536 * Network Packet Size.

Other than that, your query is limited by runtime conditions. It will usually run out of stack size because x IN (a,b,c) is nothing but x=a OR x=b OR x=c which creates an expression tree similar to x=a OR (x=b OR (x=c)), so it gets very deep with a large number of OR. SQL 7 would hit a SO at about 10k values in the IN, but nowdays stacks are much deeper (because of x64), so it can go pretty deep.

Update

You already found Erland's article on the topic of passing lists/arrays to SQL Server. With SQL 2008 you also have Table Valued Parameters which allow you to pass an entire DataTable as a single table type parameter and join on it.

XML and XPath is another viable solution:

SELECT ...
FROM Table
JOIN (
   SELECT x.value(N'.',N'uniqueidentifier') as guid
   FROM @values.nodes(N'/guids/guid') t(x)) as guids
 ON Table.guid = guids.guid;

ASP.NET MVC1 -> MVC3

string path = HttpContext.Current.Server.MapPath("~/App_Data/somedata.xml");

ASP.NET MVC4

string path = Server.MapPath("~/App_Data/somedata.xml");

HttpServerUtility.MapPath Method

In my case, I was calling this.setState({}) correctly, but I my function wasn't bound to this, so it wasn't working. Adding .bind(this) to the function call or doing this.foo = this.foo.bind(this) in the constructor fixed it.

SqlParameters[1] = new SqlParameter("Date1", SqlDbType.SqlDateTime);
SqlParameters[1].Value = DBNull.Value;
SqlParameters[1].Direction = ParameterDirection.Input;

...then copy for the second.

Here's an example of how you would accomplish such a task:

#import <Foundation/Foundation.h>
typedef int (^IntBlock)();

@interface myobj : NSObject
{
    IntBlock compare;
}

@property(readwrite, copy) IntBlock compare;

@end

@implementation myobj

@synthesize compare;

- (void)dealloc 
{
   // need to release the block since the property was declared copy. (for heap
   // allocated blocks this prevents a potential leak, for compiler-optimized 
   // stack blocks it is a no-op)
   // Note that for ARC, this is unnecessary, as with all properties, the memory management is handled for you.
   [compare release];
   [super dealloc];
}
@end

int main () {
    @autoreleasepool {
        myobj *ob = [[myobj alloc] init];
        ob.compare = ^
        {
            return rand();
        };
        NSLog(@"%i", ob.compare());
        // if not ARC
        [ob release];
    }

    return 0;
}

Now, the only thing that would need to change if you needed to change the type of compare would be the typedef int (^IntBlock)(). If you need to pass two objects to it, change it to this: typedef int (^IntBlock)(id, id), and change your block to:

^ (id obj1, id obj2)
{
    return rand();
};

I hope this helps.

EDIT March 12, 2012:

For ARC, there are no specific changes required, as ARC will manage the blocks for you as long as they are defined as copy. You do not need to set the property to nil in your destructor, either.

For more reading, please check out this document: http://clang.llvm.org/docs/AutomaticReferenceCounting.html

That format doesn't exist. You need to do a combination of two things,

select convert(varchar(4),getdate(),100)  + convert(varchar(4),year(getdate()))

<bindings>
  <wsHttpBinding>
    <binding name="wsHttpBinding_Username" maxReceivedMessageSize="20000000"          maxBufferPoolSize="20000000">
      <security mode="TransportWithMessageCredential">
        <message clientCredentialType="UserName" establishSecurityContext="false"/>
      </security>
    </binding>
  </wsHttpBinding>
</bindings>

<client>
  <endpoint
            binding="wsHttpBinding"
            bindingConfiguration="wsHttpBinding_Username"
            contract="Exchange.Exweb.ExchangeServices.ExchangeServicesGenericProxy.ExchangeServicesType"
            name="ServicesFacadeEndpoint" />
</client>

Try

mount -o remount,rw /system

If no error message is printed, it works.

Or, you should do the following.

First, make sure the fs type.

mount

Issue this command to find it out.

Then

mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system

Note that the fs(yaffs2) and device(/dev/block/mtdblock3) are depend on your system.

try next:

label[for="userName"] {_x000D_
  position: relative;_x000D_
}_x000D_
_x000D_
label[for="userName"]::after {_x000D_
  content: '[after]';_x000D_
  width: 22px;_x000D_
  height: 22px;_x000D_
  display: inline-block;_x000D_
  position: absolute;_x000D_
  right: -30px;_x000D_
}

<label for="userName">_x000D_
 Name: _x000D_
 <input type="text" name="userName" id="userName">_x000D_
 </label>

It's in org.apache.spark.sql.DataFrame for sort method:

df.sort($"col1", $"col2".desc)

Note $ and .desc inside sort for the column to sort the results by.

This exception will come in case your server is based on JDK 7 and your client is on JDK 6 and using SSL certificates. In JDK 7 sslv2hello message handshaking is disabled by default while in JDK 6 sslv2hello message handshaking is enabled. For this reason when your client trying to connect server then a sslv2hello message will be sent towards server and due to sslv2hello message disable you will get this exception. To solve this either you have to move your client to JDK 7 or you have to use 6u91 version of JDK. But to get this version of JDK you have to get the MOS (My Oracle Support) Enterprise support. This patch is not public.

For me, to develop for web, works fine the following:

Image(
  image: AssetImage('lib/images/portadaSchamann5.png'),
  alignment: Alignment.center,
  height: double.infinity,
  width: double.infinity,
  fit: BoxFit.fill,
),

Using PuTTY's pscp.exe (which I have in an $env:path directory):

pscp -sftp -pw passwd c:\filedump\* user@host:/Outbox/
mv c:\filedump\* c:\backup\*

For JavaScript arrays, you use push().

var a = [];
a.push(12);
a.push(32);

For jQuery objects, there's add().

$('div.test').add('p.blue');

Note that while push() modifies the original array in-place, add() returns a new jQuery object, it does not modify the original one.

It's quite unclear how you are computing the size ("the size in debug mode"?").

Use printf():

printf("the size of c is %u\n", (unsigned int) sizeof c);

Normally you'd print a size_t value (which is the type sizeof returns) with %zu, but if you're using a pre-C99 compiler like Visual Studio that won't work.

You need to find the typedef statements in your code that define the custom names like uint8 and so on; those are not standard so nobody here can know how they're defined in your code.

New C code should use <stdint.h> which gives you uint8_t and so on.

There is a page documenting Advanced User Interactions; which has a lot of great examples on how to generate a sequence of actions, you can find it here

// Configure the action
Actions builder = new Actions(driver);

builder.keyDown(Keys.CONTROL)
   .click(someElement)
   .click(someOtherElement)
   .keyUp(Keys.CONTROL);

// Then get the action:
Action selectMultiple = builder.build();

// And execute it:
selectMultiple.perform();   

or

Actions builder = new Actions(driver);

Action dragAndDrop = builder.clickAndHold(someElement)
   .moveToElement(otherElement)
   .release(otherElement)
   .build();

dragAndDrop.perform();

Don't convert line endings. It's not the VCS's job to interpret data -- just store and version it. Every modern text editor can read both kinds of line endings anyway.

Let us consider a table which stores the shift details

Please check the SQL queries to generate table and finding the schedule based on an input(time)

Declaring the Table variable

declare @MyShiftTable table(MyShift int,StartTime time,EndTime time)

Adding values to Table variable

insert into @MyShiftTable select 1,'01:17:40.3530000','02:17:40.3530000'
insert into @MyShiftTable select 2,'09:17:40.3530000','03:17:40.3530000'
insert into @MyShiftTable select 3,'10:17:40.3530000','18:17:40.3530000'

Creating another table variable with an additional field named "Flag"

declare @Temp table(MyShift int,StartTime time,EndTime time,Flag int)

Adding values to temporary table with swapping the start and end time

insert into @Temp select MyShift,case when (StartTime>EndTime) then EndTime else StartTime end,case when (StartTime>EndTime) then StartTime else EndTime end,case when (StartTime>EndTime) then 1 else 0 end from @MyShiftTable

Creating input variable to find the Shift

declare @time time=convert(time,'10:12:40.3530000')

Query to find the shift corresponding to the time supplied

select myShift from @Temp where
(@time between StartTime and EndTime and Flag=0) or (@time not between StartTime and EndTime and Flag=1)

A funny way to remove all spaces from a variable is to use printf:

$ myvar='a cool variable    with   lots of   spaces in it'
$ printf -v myvar '%s' $myvar
$ echo "$myvar"
acoolvariablewithlotsofspacesinit

It turns out it's slightly more efficient than myvar="${myvar// /}", but not safe regarding globs (*) that can appear in the string. So don't use it in production code.

If you really really want to use this method and are really worried about the globbing thing (and you really should), you can use set -f (which disables globbing altogether):

$ ls
file1  file2
$ myvar='  a cool variable with spaces  and  oh! no! there is  a  glob  *  in it'
$ echo "$myvar"
  a cool variable with spaces  and  oh! no! there is  a  glob  *  in it
$ printf '%s' $myvar ; echo
acoolvariablewithspacesandoh!no!thereisaglobfile1file2init
$ # See the trouble? Let's fix it with set -f:
$ set -f
$ printf '%s' $myvar ; echo
acoolvariablewithspacesandoh!no!thereisaglob*init
$ # Since we like globbing, we unset the f option:
$ set +f

I posted this answer just because it's funny, not to use it in practice.

set guioptions+=a

will, ... uhmm, in short, whenever you select/yank something put it in the clipboard as well (not Vim's, but the global keyboard of the window system). That way you don't have to think about yanking things into a special register.

so many posts...

GpsStatus.Listener gpsListener = new GpsStatus.Listener() {
                        public void onGpsStatusChanged(int event) {
                            if( event == GpsStatus.GPS_EVENT_FIRST_FIX){
                                showMessageDialog("GPS fixed");
                            }
                        }
                 };

adding this code, with addGpsListener... showMessageDialog ... just shows a standard dialog window with the string

did the job perfectly for me :) thanks a lot :=) (sry for this post, not yet able to vote)

Method 1 :

rake db:migrate:up VERSION=20080906120000

Method 2:

In Rails Console 1. Copy paste the migration class in console (say add_name_to_user.rb) 2. Then in console, type the following

Sharding.run_on_all_shards{AddNameToUser.up}

It is done!!

Use loggers and print statements in the Development Environment, you can go for sentry in case of production environments.

Observations:

• #include <cstring> should introduce std::strcpy().
• using namespace std; (as written in medico.h) introduces any identifiers from std:: into the global namespace.

Aside from using namespace std; being somewhat clumsy once the application grows larger (as it introduces one hell of a lot of identifiers into the global namespace), and that you should never use using in a header file (see below!), using namespace does not affect identifiers introduced after the statement.

(using namespace std is written in the header, which is included in medico.cpp, but #include <cstring> comes after that.)

My advice: Put the using namespace std; (if you insist on using it at all) into medico.cpp, after any includes, and use explicit std:: in medico.h.

strcmpi() is not a standard function at all; while being defined on Windows, you have to solve case-insensitive compares differently on Linux.

(On general terms, I would like to point to this answer with regards to "proper" string handling in C and C++ that takes Unicode into account, as every application should. Summary: The standard cannot handle these things correctly; do use ICU.)

warning: deprecated conversion from string constant to ‘char*’

A "string constant" is when you write a string literal (e.g. "Hello") in your code. Its type is const char[], i.e. array of constant characters (as you cannot change the characters). You can assign an array to a pointer, but assigning to char *, i.e. removing the const qualifier, generates the warning you are seeing.

OT clarification: using in a header file changes visibility of identifiers for anyone including that header, which is usually not what the user of your header file wants. For example, I could use std::string and a self-written ::string just perfectly in my code, unless I include your medico.h, because then the two classes will clash.

Don't use using in header files.

And even in implementation files, it can introduce lots of ambiguity. There is a case to be made to use explicit namespacing in implementation files as well.

For anyone who wants to sort the variable in third layer:

<select ng-option="friend.pet.name for friend in friends"></select>

you can do it like this

<select ng-option="friend.pet.name for friend in friends | orderBy: 'pet.name'"></select>

You could use the -I command line switch or :load_paths option from Ruby code to add sub_directory_a to Sass's load path. So if you're running Sass from root_directory, do something like this:

sass -I sub_directory_a --watch sub_directory_b:sub_directory_b

Then you can simply use @import "common" in more_styles.scss.

It looks like there is no difference, for uses each underneath.

$ irb
>> for x in nil
>> puts x
>> end
NoMethodError: undefined method `each' for nil:NilClass
    from (irb):1
>> nil.each {|x| puts x}
NoMethodError: undefined method `each' for nil:NilClass
    from (irb):4

Like Bayard says, each is more idiomatic. It hides more from you and doesn't require special language features. Per Telemachus's Comment

for .. in .. sets the iterator outside the scope of the loop, so

for a in [1,2]
  puts a
end

leaves a defined after the loop is finished. Where as each doesn't. Which is another reason in favor of using each, because the temp variable lives a shorter period.

data="UTF-8 DATA"
udata=data.decode("utf-8")
asciidata=udata.encode("ascii","ignore")

Greetings if i get you right you need a JavaScript function that doing it

function report(v) {
//To Do
  switch(v) {
    case "daily":
      //Do something
      break;
    case "monthly":
      //Do somthing
      break;
    }
  }

Regards

I believe you could try something like this:

var postData = 
            {
                "bid":bid,
                "location1":"1","quantity1":qty1,"price1":price1,
                "location2":"2","quantity2":qty2,"price2":price2,
                "location3":"3","quantity3":qty3,"price3":price3
            }
$.ajax({
        type: "POST",
        dataType: "json",
        url: "add_cart.php",
        data: postData,
        success: function(data){
            alert('Items added');
        },
        error: function(e){
            console.log(e.message);
        }
});

the json encode should happen automatically, and a dump of your post should give you something like:

array(
    "bid"=>bid,
    "location1"=>"1",
    "quantity1"=>qty1,
    "price1"=>price1,
    "location2"=>"2",
    "quantity2"=>qty2,
    "price2"=>price2,
    "location3"=>"3",
    "quantity3"=>qty3,
    "price3"=>price3
)

I had this problem. I searched the internet, took all advices, changes configurations, but the problem is still there. Finally with the help of the server administrator, he found that the problem lies in MySQL database column definition. one of the columns in the a table was assigned to 'Longtext' which leads to allocate 4,294,967,295 bites of memory. It seems working OK if you don't use MySqli prepare statement, but once you use prepare statement, it tries to allocate that amount of memory. I changed the column type to Mediumtext which needs 16,777,215 bites of memory space. The problem is gone. Hope this help.

In case anyone wants to have a responsive flexbox with percentages (%) it is much easier for media queries.

flex-basis: 25%;

This will be a lot smoother when testing.

// VARIABLES
$screen-xs:                                         480px;
$screen-sm:                                         768px;
$screen-md:                                         992px;
$screen-lg:                                         1200px;
$screen-xl:                                         1400px;
$screen-xxl:                                        1600px;

// QUERIES
@media screen (max-width: $screen-lg) {
    flex-basis: 25%;
}

@media screen (max-width: $screen-md) {
    flex-basis: 33.33%;
}

The pixels array is stored in the "data" attribute of cv::Mat. Let's suppose that we have a Mat matrix where each pixel has 3 bytes (CV_8UC3).

For this example, let's draw a RED pixel at position 100x50.

Mat foo;
int x=100, y=50;

Solution 1:

Create a macro function that obtains the pixel from the array.

#define PIXEL(frame, W, x, y) (frame+(y)*3*(W)+(x)*3)
//...
unsigned char * p = PIXEL(foo.data, foo.rols, x, y);
p[0] = 0;   // B
p[1] = 0;   // G
p[2] = 255; // R

Solution 2:

Get's the pixel using the method ptr.

unsigned char * p = foo.ptr(y, x); // Y first, X after
p[0] = 0;   // B
p[1] = 0;   // G
p[2] = 255; // R

This should work:

IDTSVariables100 vars = null;
VariableDispenser.LockForRead("System::TaskName");
VariableDispenser.GetVariables(vars);
string TaskName = vars("System::TaskName").Value.ToString();
vars.Unlock();

Your initial code lacks call of the GetVariables() method.

Timer.Elapsed expects method of specific signature (with arguments object and EventArgs). If you want to use your PlayMusicEvent method with additional argument evaluated during event registration, you can use lambda expression as an adapter:

myTimer.Elapsed += new ElapsedEventHandler((sender, e) => PlayMusicEvent(sender, e, musicNote));

Edit: you can also use shorter version:

myTimer.Elapsed += (sender, e) => PlayMusicEvent(sender, e, musicNote);

Firstly create app.js file in the directory you want to publish.

var http = require('http');
var fs = require('fs');
var mime = require('mime');
http.createServer(function(req,res){
    if (req.url != '/app.js') {
    var url = __dirname + req.url;
        fs.stat(url,function(err,stat){
            if (err) {
            res.writeHead(404,{'Content-Type':'text/html'});
            res.end('Your requested URI('+req.url+') wasn\'t found on our server');
            } else {
            var type = mime.getType(url);
            var fileSize = stat.size;
            var range = req.headers.range;
                if (range) {
                    var parts = range.replace(/bytes=/, "").split("-");
                var start = parseInt(parts[0], 10);
                    var end = parts[1] ? parseInt(parts[1], 10) : fileSize-1;
                    var chunksize = (end-start)+1;
                    var file = fs.createReadStream(url, {start, end});
                    var head = {
                'Content-Range': `bytes ${start}-${end}/${fileSize}`,
                'Accept-Ranges': 'bytes',
                'Content-Length': chunksize,
                'Content-Type': type
                }
                    res.writeHead(206, head);
                    file.pipe(res);
                    } else {    
                    var head = {
                'Content-Length': fileSize,
                'Content-Type': type
                    }
                res.writeHead(200, head);
                fs.createReadStream(url).pipe(res);
                    }
            }
        });
    } else {
    res.writeHead(403,{'Content-Type':'text/html'});
    res.end('Sorry, access to that file is Forbidden');
    }
}).listen(8080);

Simply run node app.js and your server shall be running on port 8080. Besides video it can stream all kinds of files.

Flex Solution

It is perfectly fine if you want to go with the display: table-cell solution. But instead of hacking it out, we have a better way to accomplish the same using display: flex;. flex is something which has a decent support.

.wrap {_x000D_
  height: 200px;_x000D_
  width: 200px;_x000D_
  border: 1px solid #aaa;_x000D_
  margin: 10px;_x000D_
  display: flex;_x000D_
}_x000D_
_x000D_
.wrap span {_x000D_
  align-self: flex-end;_x000D_
}

<div class="wrap">_x000D_
  <span>Align me to the bottom</span>_x000D_
</div>

In the above example, we first set the parent element to display: flex; and later, we use align-self to flex-end. This helps you push the item to the end of the flex parent.

Old Solution (Valid if you are not willing to use flex)

If you want to align the text to the bottom, you don't have to write so many properties for that, using display: table-cell; with vertical-align: bottom; is enough

div {_x000D_
  display: table-cell;_x000D_
  vertical-align: bottom;_x000D_
  border: 1px solid #f00;_x000D_
  height: 100px;_x000D_
  width: 100px;_x000D_
}

<div>Hello</div>

(Or JSFiddle)

I modified @FrinkTheBrave 's answer to also create sub-directories, and resolve relative paths:

$src_root = Resolve-Path("./source/path/")
$target_root = Resolve-Path("./target/path/")
$glob_filter = "*.*"
Get-ChildItem -path $src_root -filter $glob_filter -recurse | 
  ForEach-Object {
        $target_filename=($_.FullName -replace [regex]::escape($src_root),$target_root) 
        $target_path=Split-Path $target_filename
        if (!(Test-Path -Path $target_path)) {
            New-Item $target_path -ItemType Directory
        }
        Copy-Item $_.FullName -destination $target_filename
    }

For a web service hosted in ASP.NET, the configuration property is executionTimeout:

<configuration> <system.web>

<httpRuntime executionTimeout="360" />

</system.web>

</configuration>

Set this and the thread abort exception will go away :)

We use this code to check if the string is a valid date

var dt = new Date(txtDate.value)
if (isNaN(dt))

Here's a simplest example from ASP.NET Community, this gave me a clear understanding on the concept....

what difference does this make?

For an example of this, here is a way to put focus on a text box on a page when the page is loaded into the browser—with Visual Basic using the RegisterStartupScript method:

Page.ClientScript.RegisterStartupScript(Me.GetType(), "Testing", _ 
"document.forms[0]['TextBox1'].focus();", True)

This works well because the textbox on the page is generated and placed on the page by the time the browser gets down to the bottom of the page and gets to this little bit of JavaScript.

But, if instead it was written like this (using the RegisterClientScriptBlock method):

Page.ClientScript.RegisterClientScriptBlock(Me.GetType(), "Testing", _
"document.forms[0]['TextBox1'].focus();", True)

Focus will not get to the textbox control and a JavaScript error will be generated on the page

The reason for this is that the browser will encounter the JavaScript before the text box is on the page. Therefore, the JavaScript will not be able to find a TextBox1.

@ComponentScan uses string array, like this:

@ComponentScan({"com.my.package.first","com.my.package.second"})

When you provide multiple package names in only one string, Spring interprets this as one package name, and thus can't find it.

if the project is not a big ,

1- change the name of folder project

2- make a new project with the same project (before renaming)

3- add existing files from the old project to the new project (totally same , same folders , same names , ...)

4- open the the new project file (as xml ) and the old project

5- copy the new project file (xml content ) and paste it in the old project file

6- delete the old project

7- rename the old folder project to old name

A(x1,y1) B(x2,y2) a line segment with length L=sqrt( (y2-y1)^2 + (x2-x1)^2 )

and a point M(x,y)

making a transformation of coordinates in order to be the point A the new start and B a point of the new X axis

we have the new coordinates of the point M

which are newX = ((x-x1)(x2-x1)+(y-y1)(y2-y1)) / L
from (x-x1)*cos(t)+(y-y1)*sin(t) where cos(t)=(x2-x1)/L, sin(t)=(y2-y1)/L

newY = ((y-y1)(x2-x1)-(x-x1)(y2-y1)) / L
from (y-y1)*cos(t)-(x-x1)*sin(t)

because "left" is the side of axis X where the Y is positive, if the newY (which is the distance of M from AB) is positive, then it is on the left side of AB (the new X axis) You may omit the division by L (allways positive), if you only want the sign

If you have imported an existing project, then just remove your source folders and then add them again to build path, and restart eclipse. Most of the times eclipse will keep showing the error till you restart.

why making life hard-

PreparedStatement pstmt = conn.prepareStatement("select * from employee where id in ("+ StringUtils.join(arraylistParameter.iterator(),",") +)");

In order for your code to show, you need several things:

Firstly, there needs to be a server that handles HTTP requests. At the moment you are just opening a file with Firefox on your local hard drive. A server like Apache or something similar is required.

Secondly, presuming that you now have a server that serves the files, you will also need something that interprets the code as Python code for the server. For Python users the go to solution is nowadays mod_wsgi. But for simpler cases you could stick with CGI (more info here), but if you want to produce web pages easily, you should go with a existing Python web framework like Django.

Setting this up can be quite the hassle, so be prepared.

Use stat(), if it is cross-platform enough for your needs. It is not C++ standard though, but POSIX.

On MS Windows there is _stat, _stat64, _stati64, _wstat, _wstat64, _wstati64.

Do you want to iterate over characters or words?

For words, you'll have to split the words first, such as

for index, word in enumerate(loopme.split(" ")):
    print "CURRENT WORD IS", word, "AT INDEX", index

This prints the index of the word.

For the absolute character position you'd need something like

chars = 0
for index, word in enumerate(loopme.split(" ")):
    print "CURRENT WORD IS", word, "AT INDEX", index, "AND AT CHARACTER", chars
    chars += len(word) + 1

This works for me on OSX:

string="1 2 3 4 5"
declare -a array=($string)

If your string has different delimiter, just 1st replace those with space:

string="1,2,3,4,5"
delimiter=","
declare -a array=($(echo $string | tr "$delimiter" " "))

Simple :-)

I know this is an old thread, but - since it's not been mentioned this works

  Dictionary<string, object> LookUp = new Dictionary<string, object>();
  LookUp.Add("bob", new { age = "23", height = "2.1m", weight = "110kg"});
  LookUp.Add("jasper", new { age = "33", height = "1.75m", weight = "90kg"});
  foreach(KeyValuePair<string, object> entry in LookUp )
  {
      object person = entry.Value;
      Console.WriteLine("Person name:" + entry.Key + " Age: "  + person.age);          
  }

You can use std::find for this:

#include <algorithm> // for std::find
#include <iterator> // for std::begin, std::end

int main () 
{
  int a[] = {3, 6, 8, 33};
  int x = 8;
  bool exists = std::find(std::begin(a), std::end(a), x) != std::end(a);
}

std::find returns an iterator to the first occurrence of x, or an iterator to one-past the end of the range if x is not found.

Ive actually managed to get the file picker to appear in Kitkat, to select a image and to get the filepath in activity result but the only thing that im not able to "fix" (cause this workaround) is to make the input filed to fill out with file data.

Does anyone know any way how to access the input-field from a activity ? Am using this example comment. Is just this last piece, the last brick in the wall that i just have to put into right place (tho i could trigger upload of image file directly from code.

UPDATE #1

Im no hardcore Android dev so i'll show code on newbie level. Im creating a new Activity in already existing Activity

Manifest part

<uses-permission android:name="android.permission.INTERNET"/>
<uses-permission android:name="android.permission.READ_EXTERNAL_STORAGE"/>
<application android:label="TestApp">
 <activity android:name=".BrowseActivity"></activity>
</application>

Am creating my BrowseActivity class from this example answer. The WebChromeClient() instance basically looks the same, except last piece, triggering the picker UI part...

private final static int FILECHOOSER_RESULTCODE=1;  
private final static int KITKAT_RESULTCODE = 2;

...

// The new WebChromeClient() looks pretty much the same, except one piece...

WebChromeClient chromeClient = new WebChromeClient(){  
    // For Android 3.0+
    public void openFileChooser(ValueCallback<Uri> uploadMsg) { /* Default code */ }  

    // For Android 3.0+
    public void openFileChooser( ValueCallback uploadMsg, String acceptType ) { /* Default code */ }  

    //For Android 4.1, also default but it'll be as example
    public void openFileChooser(ValueCallback<Uri> uploadMsg, String acceptType, String capture){
        mUploadMessage = uploadMsg;
        Intent i = new Intent(Intent.ACTION_GET_CONTENT);
        i.addCategory(Intent.CATEGORY_OPENABLE);
        i.setType("*/*");
        BrowseActivity.this.startActivityForResult(Intent.createChooser(i, "File Chooser"), BrowseActivity.FILECHOOSER_RESULTCODE);

    }  

    // The new code
    public void showPicker( ValueCallback<Uri> uploadMsg ){  
        // Here is part of the issue, the uploadMsg is null since it is not triggered from Android
        mUploadMessage = uploadMsg; 
        Intent i = new Intent(Intent.ACTION_GET_CONTENT);
        i.addCategory(Intent.CATEGORY_OPENABLE);
        i.setType("*/*");
        BrowseActivity.this.startActivityForResult(Intent.createChooser(i, "File Chooser"), BrowseActivity.KITKAT_RESULTCODE);
    }}

And some more stuff

web = new WebView(this);
// Notice this part, setting chromeClient as js interface is just lazy
web.getSettings().setJavaScriptEnabled(true);
web.addJavascriptInterface(chromeClient, "jsi" );
web.getSettings().setAllowFileAccess(true);
web.getSettings().setAllowContentAccess(true);
web.clearCache(true);
web.loadUrl( "http://as3breeze.com/upload.html" );
web.setWebViewClient(new myWebClient());
web.setWebChromeClient(chromeClient);


@Override protected void onActivityResult(int requestCode, int resultCode, Intent intent) {  
  Log.d("Result", "("+requestCode+ ") - (" +resultCode  + ") - (" + intent + ") - " + mUploadMessage);  
    if (null == intent) return;  
    Uri result = null;  
    if(requestCode==FILECHOOSER_RESULTCODE)  
    {  
        Log.d("Result","Old android");  
        if (null == mUploadMessage) return;  
        result = intent == null || resultCode != RESULT_OK ? null  : intent.getData();  
        mUploadMessage.onReceiveValue(result);  
        mUploadMessage = null;  
    } else if (requestCode == KITKAT_RESULTCODE) {  
        Log.d("Result","Kitkat android");  
        result = intent.getData();  
        final int takeFlags = intent.getFlags() & (Intent.FLAG_GRANT_READ_URI_PERMISSION  | Intent.FLAG_GRANT_WRITE_URI_PERMISSION);  
        String path = getPath( this, result);  
        File selectedFile = new File(path); 
//I used you example with a bit of editing so thought i would share, here i added a method to upload the file to the webserver
File selectedFile = new File(path);  
            UploadFile(selectedFile);


        //mUploadMessage.onReceiveValue( Uri.parse(selectedFile.toString()) );  
        // Now we have the file but since mUploadMessage was null, it gets errors
    }  
}

 public void UploadFile(File selectedFile)
{
    Random rnd = new Random();
    String sName = "File" + rnd.nextInt(999999) + selectedFile.getAbsolutePath().substring(selectedFile.getAbsolutePath().lastIndexOf("."));
    UploadedFileName = sName;
    uploadFile = selectedFile;
    if (progressBar != null && progressBar.isShowing())
    {
        progressBar.dismiss();
    }
 // prepare for a progress bar dialog
    progressBar = new ProgressDialog(mContext);
    progressBar.setCancelable(true);
    progressBar.setMessage("Uploading File");
    progressBar.setProgressStyle(ProgressDialog.STYLE_SPINNER);            
    progressBar.show();
    new Thread() {

        public void run() 
        {
            int serverResponseCode;
            String serverResponseMessage;
            HttpURLConnection connection = null;
            DataOutputStream outputStream = null;
            DataInputStream inputStream = null;
            String pathToOurFile = uploadFile.getAbsolutePath();
            String urlServer = "http://serveraddress/Scripts/UploadHandler.php?name" + UploadedFileName;
            String lineEnd = "\r\n";
            String twoHyphens = "--";
            String boundary =  "*****";

            int bytesRead, bytesAvailable, bufferSize;
            byte[] buffer;
            int maxBufferSize = 1*1024*1024;

            try
            {
                FileInputStream fileInputStream = new FileInputStream(uploadFile);

                URL url = new URL(urlServer);
                connection = (HttpURLConnection) url.openConnection();
                Log.i("File", urlServer);

                // Allow Inputs & Outputs.
                connection.setDoInput(true);
                connection.setDoOutput(true);
                connection.setUseCaches(false);

                // Set HTTP method to POST.
                connection.setRequestMethod("POST");

                connection.setRequestProperty("Connection", "Keep-Alive");
                connection.setRequestProperty("Content-Type", "multipart/form-data;boundary="+boundary);
                Log.i("File", "Open conn");

                outputStream = new DataOutputStream( connection.getOutputStream() );

                outputStream.writeBytes(twoHyphens + boundary + lineEnd);
                outputStream.writeBytes("Content-Disposition: form-data; name=\"uploadedfile\";filename=\"" + pathToOurFile +"\"" + lineEnd);
                outputStream.writeBytes(lineEnd);
                Log.i("File", "write bytes");

                bytesAvailable = fileInputStream.available();
                bufferSize = Math.min(bytesAvailable, maxBufferSize);
                buffer = new byte[bufferSize];
                Log.i("File", "available: " + fileInputStream.available());

                // Read file
                bytesRead = fileInputStream.read(buffer, 0, bufferSize);

                Log.i("file", "Bytes Read: " + bytesRead);
                while (bytesRead > 0)
                {
                    outputStream.write(buffer, 0, bufferSize);
                    bytesAvailable = fileInputStream.available();
                    bufferSize = Math.min(bytesAvailable, maxBufferSize);
                    bytesRead = fileInputStream.read(buffer, 0, bufferSize);
                }

                outputStream.writeBytes(lineEnd);
                outputStream.writeBytes(twoHyphens + boundary + twoHyphens + lineEnd);

                // Responses from the server (code and message)
                serverResponseCode = connection.getResponseCode();
                serverResponseMessage = connection.getResponseMessage();
                Log.i("file repsonse", serverResponseMessage);

//once the file is uploaded call a javascript function to verify the user wants to save the image
                progressBar.dismiss();
                runOnUiThread(new Runnable() 
                {

                    @Override
                    public void run() 
                    {
                        Log.i("start", "File name: " + UploadedFileName);
                        WebView myWebView = (WebView) findViewById(R.id.webview);
                        myWebView.loadUrl("javascript:CheckImage('" + UploadedFileName + "')");
                    }
                });


                fileInputStream.close();
                outputStream.flush();
                outputStream.close();
            }
            catch (Exception ex)
            {
                Log.i("exception", "Error: " + ex.toString());
            }               
        }
    }.start();

}

Lastly, some more code to get the actual file path, code found on SO, ive added post url in comments as well so the author gets credits for his work.

/**
 * Get a file path from a Uri. This will get the the path for Storage Access
 * Framework Documents, as well as the _data field for the MediaStore and
 * other file-based ContentProviders.
 *
 * @param context The context.
 * @param uri The Uri to query.
 * @author paulburke
 * @source https://stackoverflow.com/a/20559175
 */
@TargetApi(Build.VERSION_CODES.KITKAT)
public static String getPath(final Context context, final Uri uri) {

    final boolean isKitKat = Build.VERSION.SDK_INT >= Build.VERSION_CODES.KITKAT;

    // DocumentProvider
    if (isKitKat && DocumentsContract.isDocumentUri(context, uri)) {
        // ExternalStorageProvider
        if (isExternalStorageDocument(uri)) {
            final String docId = DocumentsContract.getDocumentId(uri);
            final String[] split = docId.split(":");
            final String type = split[0];

            if ("primary".equalsIgnoreCase(type)) {
                return Environment.getExternalStorageDirectory() + "/" + split[1];
            }

            // TODO handle non-primary volumes
        }
        // DownloadsProvider
        else if (isDownloadsDocument(uri)) {

            final String id = DocumentsContract.getDocumentId(uri);
            final Uri contentUri = ContentUris.withAppendedId(
                    Uri.parse("content://downloads/public_downloads"), Long.valueOf(id));

            return getDataColumn(context, contentUri, null, null);
        }
        // MediaProvider
        else if (isMediaDocument(uri)) {
            final String docId = DocumentsContract.getDocumentId(uri);
            final String[] split = docId.split(":");
            final String type = split[0];

            Uri contentUri = null;
            if ("image".equals(type)) {
                contentUri = MediaStore.Images.Media.EXTERNAL_CONTENT_URI;
            } else if ("video".equals(type)) {
                contentUri = MediaStore.Video.Media.EXTERNAL_CONTENT_URI;
            } else if ("audio".equals(type)) {
                contentUri = MediaStore.Audio.Media.EXTERNAL_CONTENT_URI;
            }

            final String selection = "_id=?";
            final String[] selectionArgs = new String[] {
                    split[1]
            };

            return getDataColumn(context, contentUri, selection, selectionArgs);
        }
    }
    // MediaStore (and general)
    else if ("content".equalsIgnoreCase(uri.getScheme())) {
        return getDataColumn(context, uri, null, null);
    }
    // File
    else if ("file".equalsIgnoreCase(uri.getScheme())) {
        return uri.getPath();
    }

    return null;
}

/**
 * Get the value of the data column for this Uri. This is useful for
 * MediaStore Uris, and other file-based ContentProviders.
 *
 * @param context The context.
 * @param uri The Uri to query.
 * @param selection (Optional) Filter used in the query.
 * @param selectionArgs (Optional) Selection arguments used in the query.
 * @return The value of the _data column, which is typically a file path.
 * @source https://stackoverflow.com/a/20559175
 */
public static String getDataColumn(Context context, Uri uri, String selection,
                                   String[] selectionArgs) {

    Cursor cursor = null;
    final String column = "_data";
    final String[] projection = {
            column
    };

    try {
        cursor = context.getContentResolver().query(uri, projection, selection, selectionArgs,
                null);
        if (cursor != null && cursor.moveToFirst()) {
            final int column_index = cursor.getColumnIndexOrThrow(column);
            return cursor.getString(column_index);
        }
    } finally {
        if (cursor != null)
            cursor.close();
    }
    return null;
}


/**
 * @param uri The Uri to check.
 * @return Whether the Uri authority is ExternalStorageProvider.
 * @source https://stackoverflow.com/a/20559175
 */
public static boolean isExternalStorageDocument(Uri uri) {
    return "com.android.externalstorage.documents".equals(uri.getAuthority());
}

/**
 * @param uri The Uri to check.
 * @return Whether the Uri authority is DownloadsProvider.
 * @source https://stackoverflow.com/a/20559175
 */
public static boolean isDownloadsDocument(Uri uri) {
    return "com.android.providers.downloads.documents".equals(uri.getAuthority());
}

/**
 * @param uri The Uri to check.
 * @return Whether the Uri authority is MediaProvider.
 * @source https://stackoverflow.com/a/20559175
 */
public static boolean isMediaDocument(Uri uri) {
    return "com.android.providers.media.documents".equals(uri.getAuthority());
}  

Lastly, the HTML page needs to trigger that new method of showPicker (specificaly when on A4.4)

<form id="form-upload" method="post" enctype="multipart/form-data">
    <input id="fileupload" name="fileupload" type="file" onclick="javascript:prepareForPicker();"/>
</form>
<script type="text/javascript">
function getAndroidVersion() {
    var ua = navigator.userAgent; 
    var match = ua.match(/Android\s([0-9\.]*)/);
    return match ? match[1] : false;
};
function prepareForPicker(){
    if(getAndroidVersion().indexOf("4.4") != -1){
        window.jsi.showPicker();
        return false;
    }
}

function CheckImage(name)
{
//Check to see if user wants to save I used some ajax to save the file if necesarry
}
</script>

try this if you want your radio button to be checked based on value of some variable e.g. "genderStr" then you can use following code snippet

    if(genderStr.equals("Male"))
       genderRG.check(R.id.maleRB);
    else 
       genderRG.check(R.id.femaleRB);

Google changed the name to avoid confusion.

Problem with the old name fill parent was that it implies its affecting the dimensions of the parent, while match parent better describes the resulting behavior - match the dimension with the parent.

Both constants resolve to -1 in the end, and so result in the identical behavior in the app. Ironically enough, this name change made to clarify things seems to have added confusion rather than eliminating it.

On the actual behavior, there is no difference. They all return None and that's it. However, there is a time and place for all of these. The following instructions are basically how the different methods should be used (or at least how I was taught they should be used), but they are not absolute rules so you can mix them up if you feel necessary to.

Using return None

This tells that the function is indeed meant to return a value for later use, and in this case it returns None. This value None can then be used elsewhere. return None is never used if there are no other possible return values from the function.

In the following example, we return person's mother if the person given is a human. If it's not a human, we return None since the person doesn't have a mother (let's suppose it's not an animal or something).

def get_mother(person):
    if is_human(person):
        return person.mother
    else:
        return None

Using return

This is used for the same reason as break in loops. The return value doesn't matter and you only want to exit the whole function. It's extremely useful in some places, even though you don't need it that often.

We've got 15 prisoners and we know one of them has a knife. We loop through each prisoner one by one to check if they have a knife. If we hit the person with a knife, we can just exit the function because we know there's only one knife and no reason the check rest of the prisoners. If we don't find the prisoner with a knife, we raise an alert. This could be done in many different ways and using return is probably not even the best way, but it's just an example to show how to use return for exiting a function.

def find_prisoner_with_knife(prisoners):
    for prisoner in prisoners:
        if "knife" in prisoner.items:
            prisoner.move_to_inquisition()
            return # no need to check rest of the prisoners nor raise an alert
    raise_alert()

Note: You should never do var = find_prisoner_with_knife(), since the return value is not meant to be caught.

Using no return at all

This will also return None, but that value is not meant to be used or caught. It simply means that the function ended successfully. It's basically the same as return in void functions in languages such as C++ or Java.

In the following example, we set person's mother's name and then the function exits after completing successfully.

def set_mother(person, mother):
    if is_human(person):
        person.mother = mother

Note: You should never do var = set_mother(my_person, my_mother), since the return value is not meant to be caught.

I found a bug in MySQL 5.1.72 when using the nested if() functions .... the value of column variables (e.g. qty_1) is blank inside the second if(), rendering it useless. Use the following construct instead:

case 
  when qty_1<='23' then price
  when '23'>qty_1 && qty_2<='23' then price_2
  when '23'>qty_2 && qty_3<='23' then price_3
  when '23'>qty_3 then price_4
  else 1
end

I just had the same problem, what I did, I arranged the library order in sequence, for example there were java.lang.NullPointerException and javacard.lang.NullPointerException. I made the first one as default library and if you needed to use the other you can explicitly specify the full qualified class name.

ResultSet resultSet = statement.executeQuery("SELECT * from foo");
ResultSetMetaData rsmd = resultSet.getMetaData();
int columnsNumber = rsmd.getColumnCount();
while (resultSet.next()) {
    for (int i = 1; i <= columnsNumber; i++) {
        if (i > 1) System.out.print(",  ");
        String columnValue = resultSet.getString(i);
        System.out.print(columnValue + " " + rsmd.getColumnName(i));
    }
    System.out.println("");
}

Reference : Printing the result of ResultSet