I had two charts.

<div id="barChart"></div>
<div id="bubbleChart"></div>

This removed all charts.

d3.select("svg").remove(); 

This worked for removing the existing bar chart, but then I couldn't re-add the bar chart after

d3.select("#barChart").remove();

Tried this. It not only let me remove the existing bar chart, but also let me re-add a new bar chart.

d3.select("#barChart").select("svg").remove();

var svg = d3.select('#barChart')
       .append('svg')
       .attr('width', width + margins.left + margins.right)
       .attr('height', height + margins.top + margins.bottom)
       .append('g')
       .attr('transform', 'translate(' + margins.left + ',' + margins.top + ')');

Not sure if this is the correct way to remove, and re-add a chart in d3. It worked in Chrome, but have not tested in IE.

I found the game library Allegro easy to use back in the day. Might be worth a look.

I was having a problem getting my ASP.NET 5.0/MVC 6 app to serve static binary file types or browse virtual directories. It looks like this is now done in Configure() at startup. See http://docs.asp.net/en/latest/fundamentals/static-files.html for a quick primer.

use the full-featured .ajax jQuery function. compare with https://stackoverflow.com/a/3543713/1689451 for an example.

without testing, just merging your code with the referenced SO question:

target = $(this).attr('data-target');

$.ajax({
    url: $(this).attr('href'),
    type: "GET",
    timeout: 2000,
    success: function(response) { $(target).modal({
        show: true
    }); },
    error: function(x, t, m) {
        if(t==="timeout") {
            alert("got timeout");
        } else {
            alert(t);
        }
    }
});?

For curl, how about using the -d switch? Like: curl -X PUT "localhost:8080/urlstuffhere" -d "@filename"?

The default generator for Windows seems to be set to NMAKE. Try to use:

cmake -G "MinGW Makefiles"

Or use the GUI, and select MinGW Makefiles when prompted for a generator. Don't forget to cleanup the directory where you tried to run CMake, or delete the cache in the GUI. Otherwise, it will try again with NMAKE.

Just for more one option...You can do it this way too:

MYJSON = {
    'username': 'gula_gut',
    'pics': '/0/myfavourite.jpeg',
    'id': '1'
}

#changing username
MYJSON['username'] = 'calixto'
print(MYJSON['username'])

I hope this can help.

"Bad style" is very subjective. If a certain conventions works for you and your team, I think that will qualify a bad/good style.

To answer your question: I use a leading underscore to mark private variables. I find it clear and I can scan through code fast and find out what's going on.

(I almost never use "this" though, except to prevent a name clash.)

git diff path/file.css | grep -E "^\+" | grep -v '+++ b/' | cut -c 2-

• grep -E "^\+" is from previous accepted answer, it is incomplete because leaves non-source stuff
• grep -v '+++ b' removes non-source line with file name of later version
• cut -c 2- removes column of + signs, also may use sed 's/^\+//'

comm or sdiff were not an option because of git.

//finding a particular word any where inthe string and printing its index and occurence  
class IndOc
{
    public static void main(String[] args) 
    {
        String s="this is hyderabad city and this is";
        System.out.println("the given string is ");
        System.out.println("----------"+s);
        char ch[]=s.toCharArray();
        System.out.println(" ----word is found at ");
        int j=0,noc=0;
        for(int i=0;i<ch.length;i++)
        {
            j=i;

            if(ch[i]=='i' && ch[j+1]=='s')
            {
                System.out.println(" index "+i);
            noc++;  
            }

        }
        System.out.println("----- no of occurences are "+noc);

    }
}

Most of the solutions are directly using grep command to find the class. However, it would not give you the package name of the class. Also if the jar is compressed, grep will not work.

This solution is using jar command to list the contents of the file and grep the class you are looking for.

It will print out the class with package name and also the jar file name.

find . -type f -name '*.jar' -print0 |  xargs -0 -I '{}' sh -c 'jar tf {} | grep Hello.class &&  echo {}'

You can also search with your package name like below:

find . -type f -name '*.jar' -print0 |  xargs -0 -I '{}' sh -c 'jar tf {} | grep com/mypackage/Hello.class &&  echo {}'

That is because you are opening , writing and closing the file 10 times inside your for loop

myfile = open('xyz.txt', 'w')
myfile.writelines(var1)
myfile.close()

You should open and close your file outside for loop.

myfile = open('xyz.txt', 'w')
for line in lines:
    var1, var2 = line.split(",");
    myfile.write("%s\n" % var1)

myfile.close()
text_file.close()

You should also notice to use write and not writelines.

writelines writes a list of lines to your file.

Also you should check out the answers posted by folks here that uses with statement. That is the elegant way to do file read/write operations in Python

Disclosure: I wrote FieldVal.

Here is a solution using FieldVal. By using FieldVal UI to build a form and then FieldVal to validate the input, you can pass the error straight back into the form.

You can even run the validation code on the backend (if you're using Node.js) and show the error in the form without wiring all of the fields up manually.

Live demo: http://codepen.io/MarcusLongmuir/pen/WbOydx

function validate_form(data) {
    // This would work on the back end too (if you're using Node)

    // Validate the provided data
    var validator = new FieldVal(data);
    validator.get("email", BasicVal.email(true));
    validator.get("title", BasicVal.string(true));
    validator.get("url", BasicVal.url(true));
    return validator.end();
}


$(document).ready(function(){

    // Create a form and add some fields
    var form = new FVForm()
    .add_field("email", new FVTextField("Email"))
    .add_field("title", new FVTextField("Title"))
    .add_field("url", new FVTextField("URL"))
    .on_submit(function(value){

        // Clear the existing errors
        form.clear_errors();

        // Use the function above to validate the input
        var error = validate_form(value);

        if (error) {
            // Pass the error into the form
            form.error(error);
        } else {
            // Use the data here
            alert(JSON.stringify(value));
        }
    })

    form.element.append(
        $("<button/>").text("Submit")
    ).appendTo("body");

    //Pre-populate the form
    form.val({
        "email": "[email protected]",
        "title": "Your Title",
        "url": "http://www.example.com"
    })
});

There is an article here that describes your problem

http://www.hyperarts.com/blog/facebook-fan-pages-content-for-fans-only-static-fbml/

    <fb:visible-to-connection>
       Fans will see this content.
       <fb:else>
           Non-fans will see this content.
       </fb:else>
    </fb:visible-to-connection>

If the memory of the Mat mat is continuous (all its data is continuous), you can directly get its data to a 1D array:

std::vector<uchar> array(mat.rows*mat.cols*mat.channels());
if (mat.isContinuous())
    array = mat.data;

Otherwise, you have to get its data row by row, e.g. to a 2D array:

uchar **array = new uchar*[mat.rows];
for (int i=0; i<mat.rows; ++i)
    array[i] = new uchar[mat.cols*mat.channels()];

for (int i=0; i<mat.rows; ++i)
    array[i] = mat.ptr<uchar>(i);

UPDATE: It will be easier if you're using std::vector, where you can do like this:

std::vector<uchar> array;
if (mat.isContinuous()) {
  // array.assign(mat.datastart, mat.dataend); // <- has problems for sub-matrix like mat = big_mat.row(i)
  array.assign(mat.data, mat.data + mat.total()*mat.channels());
} else {
  for (int i = 0; i < mat.rows; ++i) {
    array.insert(array.end(), mat.ptr<uchar>(i), mat.ptr<uchar>(i)+mat.cols*mat.channels());
  }
}

p.s.: For cv::Mats of other types, like CV_32F, you should do like this:

std::vector<float> array;
if (mat.isContinuous()) {
  // array.assign((float*)mat.datastart, (float*)mat.dataend); // <- has problems for sub-matrix like mat = big_mat.row(i)
  array.assign((float*)mat.data, (float*)mat.data + mat.total()*mat.channels());
} else {
  for (int i = 0; i < mat.rows; ++i) {
    array.insert(array.end(), mat.ptr<float>(i), mat.ptr<float>(i)+mat.cols*mat.channels());
  }
}

UPDATE2: For OpenCV Mat data continuity, it can be summarized as follows:

• Matrices created by imread(), clone(), or a constructor will always be continuous.
• The only time a matrix will not be continuous is when it borrows data (except the data borrowed is continuous in the big matrix, e.g. 1. single row; 2. multiple rows with full original width) from an existing matrix (i.e. created out of an ROI of a big mat).

Please check out this code snippet for demonstration.

For anyone struggling with this problem in the now (Feb 2020), the following Medium post was crucial to overcoming it for us.

https://medium.com/@ttulka/spring-http-message-converters-customizing-770814eb2b55

In our case, the app uses @EnableWebMvc and would break if removed so, the section on 'The Life without Spring Boot' was critical. Here's what ended up solving this for us. It allows us to still consume and produce JSON and XML as well as format our datetime during serialization to suit the app's needs.

@Configuration
@ComponentScan("com.company.branch")
@EnableWebMvc
public class WebMvcConfig implements WebMvcConfigurer {

@Override
public void configureMessageConverters(List<HttpMessageConverter<?>> converters) {
    converters.add(0, new MappingJackson2XmlHttpMessageConverter(
                new Jackson2ObjectMapperBuilder()
                        .defaultUseWrapper(false)
                        .createXmlMapper(true)
                        .simpleDateFormat("yyyy-mm-dd'T'HH:mm:ss'Z'")
                        .build()
        ));
    converters.add(1, new MappingJackson2HttpMessageConverter(
                new Jackson2ObjectMapperBuilder()
                        .build()
        ));
    }
}

"Port forwarding on Chrome for Android makes it easy to test your development site on mobile. It works by creating a listening TCP port on your mobile device that maps to a particular TCP port on your development machine. Traffic between these ports travels through USB, so the connection doesn't depend on your network configuration."

More details here: https://developer.chrome.com/devtools/docs/remote-debugging#port-forwarding

new[,2] is a factor, not a numeric vector. Transform it first

new$MY_NEW_COLUMN <-as.numeric(as.character(new[,2])) * 5

As of PowerShell 5.1 there cmdlet New-LocalUser which could create local user account.

Example of usage:

Create a user account

New-LocalUser -Name "User02" -Description "Description of this account." -NoPassword

or Create a user account that has a password

$Password = Read-Host -AsSecureString
New-LocalUser "User03" -Password $Password -FullName "Third User" -Description "Description of this account."

or Create a user account that is connected to a Microsoft account

New-LocalUser -Name "MicrosoftAccount\usr [email protected]" -Description "Description of this account." 

The jQuery UI sortable feature includes a serialize method to do this. It's quite simple, really. Here's a quick example that sends the data to the specified URL as soon as an element has changes position.

$('#element').sortable({
    axis: 'y',
    update: function (event, ui) {
        var data = $(this).sortable('serialize');

        // POST to server using $.post or $.ajax
        $.ajax({
            data: data,
            type: 'POST',
            url: '/your/url/here'
        });
    }
});

What this does is that it creates an array of the elements using the elements id. So, I usually do something like this:

<ul id="sortable">
   <li id="item-1"></li>
   <li id="item-2"></li>
   ...
</ul>

When you use the serialize option, it will create a POST query string like this: item[]=1&item[]=2 etc. So if you make use - for example - your database IDs in the id attribute, you can then simply iterate through the POSTed array and update the elements' positions accordingly.

For example, in PHP:

$i = 0;

foreach ($_POST['item'] as $value) {
    // Execute statement:
    // UPDATE [Table] SET [Position] = $i WHERE [EntityId] = $value
    $i++;
}

Example on jsFiddle.

Environment variables are accessed through os.environ

import os
print(os.environ['HOME'])

Or you can see a list of all the environment variables using:

os.environ

As sometimes you might need to see a complete list!

# using get will return `None` if a key is not present rather than raise a `KeyError`
print(os.environ.get('KEY_THAT_MIGHT_EXIST'))

# os.getenv is equivalent, and can also give a default value instead of `None`
print(os.getenv('KEY_THAT_MIGHT_EXIST', default_value))

Python default installation on Windows is C:\Python. If you want to find out while running python you can do:

import sys
print(sys.prefix)

If you want to use SQL Server Management Studio, you want to install the full Oracle client, not the Instant Client. The full Oracle client is on the same download page as the Oracle database. Assuming that you are installing on a 64-bit version of Windows, I expect you want the "Oracle Database 11g Release 2 Client (11.2.0.1.0) for Microsoft Windows (x64)" download. This is several hundred MB rather than a couple of MB for the Instant Client.

This can be done with something like this:

# foo.py
class Foo:
    def method_1():
        results = uses_some_other_method()


# testing.py
from mock import patch

@patch('Foo.uses_some_other_method', return_value="specific_value"):
def test_some_other_method(mock_some_other_method):
    foo = Foo()
    the_value = foo.method_1()
    assert the_value == "specific_value"

Here's a source that you can read: Patching in the wrong place

For Atom users, the package github includes interactive staging, in the style of git gui. For shortcuts see the package's documentation.

Using Atom allows working with a theme that has dark background (by default, git gui has a white background).

For VB aficionados:

EnumStringValue = System.Enum.GetName(GetType(MyEnum), MyEnumValue)

If the length is non zero, you can also

str[str.length() - 1] = '\0';

You can add custom colors using bootstrap theming in your config file for example variables.scss and make sure you import that file before bootstrap when compiling.

$theme-colors: (
    "whatever": #900
);

Now you can do .btn-whatever

You are right, the documentation lacks of those methods. However when I dug into rxjs repository, I found nice comments about tap (too long to paste here) and pipe operators:

  /**
   * Used to stitch together functional operators into a chain.
   * @method pipe
   * @return {Observable} the Observable result of all of the operators having
   * been called in the order they were passed in.
   *
   * @example
   *
   * import { map, filter, scan } from 'rxjs/operators';
   *
   * Rx.Observable.interval(1000)
   *   .pipe(
   *     filter(x => x % 2 === 0),
   *     map(x => x + x),
   *     scan((acc, x) => acc + x)
   *   )
   *   .subscribe(x => console.log(x))
   */

In brief:

Pipe: Used to stitch together functional operators into a chain. Before we could just do observable.filter().map().scan(), but since every RxJS operator is a standalone function rather than an Observable's method, we need pipe() to make a chain of those operators (see example above).

Tap: Can perform side effects with observed data but does not modify the stream in any way. Formerly called do(). You can think of it as if observable was an array over time, then tap() would be an equivalent to Array.forEach().

You're saying you want a "serverless" solution. But that means you have no ability to put any of "your" code in the loop. (NOTE: Once you give your code to a client, it's "their" code now.) Locking down CORS is not going to help: People can easily write a non-web-based tool (or a web-based proxy) that adds the correct CORS header to abuse your system.

The big problem is that you can't differentiate between the different users. You can't allow one user to list/access his files, but prevent others from doing so. If you detect abuse, there is nothing you can do about it except change the key. (Which the attacker can presumably just get again.)

Your best bet is to create an "IAM user" with a key for your javascript client. Only give it write access to just one bucket. (but ideally, do not enable the ListBucket operation, that will make it more attractive to attackers.)

If you had a server (even a simple micro instance at $20/month), you could sign the keys on your server while monitoring/preventing abuse in realtime. Without a server, the best you can do is periodically monitor for abuse after-the-fact. Here's what I would do:

1) periodically rotate the keys for that IAM user: Every night, generate a new key for that IAM user, and replace the oldest key. Since there are 2 keys, each key will be valid for 2 days.

2) enable S3 logging, and download the logs every hour. Set alerts on "too many uploads" and "too many downloads". You will want to check both total file size and number of files uploaded. And you will want to monitor both the global totals, and also the per-IP address totals (with a lower threshold).

These checks can be done "serverless" because you can run them on your desktop. (i.e. S3 does all the work, these processes just there to alert you to abuse of your S3 bucket so you don't get a giant AWS bill at the end of the month.)

You can select every column from that sub-query by aliasing it and adding the alias before the *:

SELECT t.*, a+b AS total_sum
FROM
(
   SELECT SUM(column1) AS a, SUM(column2) AS b
   FROM table
) t

That's one of the few legitimate jobs for cat:

openssl verify -verbose -CAfile <(cat Intermediate.pem RootCert.pem) UserCert.pem

Update:

As Greg Smethells points out in the comments, this command implicitly trusts Intermediate.pem. I recommend reading the first part of the post Greg references (the second part is specifically about pyOpenSSL and not relevant to this question).

In case the post goes away I'll quote the important paragraphs:

Unfortunately, an "intermediate" cert that is actually a root / self-signed will be treated as a trusted CA when using the recommended command given above:

$ openssl verify -CAfile <(cat geotrust_global_ca.pem rogue_ca.pem) fake_sometechcompany_from_rogue_ca.com.pem fake_sometechcompany_from_rogue_ca.com.pem: OK

It seems openssl will stop verifying the chain as soon as a root certificate is encountered, which may also be Intermediate.pem if it is self-signed. In that case RootCert.pem is not considered. So make sure that Intermediate.pem is coming from a trusted source before relying on the command above.

When using NOT IN, you should also consider NOT EXISTS, which handles the null cases silently. See also PostgreSQL Wiki

SELECT mac, creation_date 
FROM logs lo
WHERE logs_type_id=11
AND NOT EXISTS (
  SELECT *
  FROM consols nx
  WHERE nx.mac = lo.mac
  );

Cleaning up Isaac's answer:

['mousemove', 'touchmove'].forEach(function(e) {
  window.addEventListener(e, mouseMoveHandler);
});

EDIT

ES6 helper function:

function addMultipleEventListener(element, events, handler) {
  events.forEach(e => element.addEventListener(e, handler))
}

One very simple way to make a method asynchronous is to use Task.Yield() method. As MSDN states:

You can use await Task.Yield(); in an asynchronous method to force the method to complete asynchronously.

Insert it at beginning of your method and it will then return immediately to the caller and complete the rest of the method on another thread.

private async Task<DateTime> CountToAsync(int num = 1000)
{
    await Task.Yield();
    for (int i = 0; i < num; i++)
    {
        Console.WriteLine("#{0}", i);
    }
    return DateTime.Now;
}

The reason for this is that you are trying to use an IntentService. Here is the line from the API Docs

The IntentService does the following:

Stops the service after all start requests have been handled, so you never have to call stopSelf().

Thus if you want your service to run indefinitely i suggest you extend the Service class instead. However this does not guarantee your service will run indefinitely. Your service will still have a chance of being killed by the kernel in a state of low memory if it is low priority.So you have two options:
1)Keep it running in the foreground by calling the startForeground() method.
2)Restart the service if it gets killed. Here is a part of the example from the docs where they talk about restarting the service after it is killed

 public int onStartCommand(Intent intent, int flags, int startId) {
      Toast.makeText(this, "service starting", Toast.LENGTH_SHORT).show();

      // For each start request, send a message to start a job and deliver the 
      // start ID so we know which request we're stopping when we finish the job 
      Message msg = mServiceHandler.obtainMessage();
      msg.arg1 = startId;
      mServiceHandler.sendMessage(msg);

      // If we get killed, after returning from here, restart 
      return START_STICKY;
  }  

import copy

a = ["a", "b", "c", "d", "e"]

b = copy.copy(a)

for item in a:
    print item
    b.remove(item)
a = copy.copy(b)

Works: to avoid changing the list you are iterating on, you make a copy of a, iterate over it and remove the items from b. Then you copy b (the altered copy) back to a.

You don't need FileInputStream to calculate file size, new File(path_to_file).length() is enough. Or, if you insist, use fileinputstream.getChannel().size().

All credits to @Martijn Pieters in the comments:

You can use the function last_insert_rowid():

The last_insert_rowid() function returns the ROWID of the last row insert from the database connection which invoked the function. The last_insert_rowid() SQL function is a wrapper around the sqlite3_last_insert_rowid() C/C++ interface function.

You want to wrap each number into Math.abs(). e.g.

System.out.println(Math.abs(-1));

prints out "1".

If you want to avoid writing the Math.-part, you can include the Math util statically. Just write

import static java.lang.Math.abs;

along with your imports, and you can refer to the abs()-function just by writing

System.out.println(abs(-1));

this is my solution

JTextField username = new JTextField();
JTextField password = new JPasswordField();
Object[] message = {
    "Username:", username,
    "Password:", password
};

int option = JOptionPane.showConfirmDialog(null, message, "Login", JOptionPane.OK_CANCEL_OPTION);
if (option == JOptionPane.OK_OPTION) {
    if (username.getText().equals("h") && password.getText().equals("h")) {
        System.out.println("Login successful");
    } else {
        System.out.println("login failed");
    }
} else {
    System.out.println("Login canceled");
}

Comparator provides a way for you to provide custom comparison logic for types that you have no control over.

Comparable allows you to specify how objects that you are implementing get compared.

Obviously, if you don't have control over a class (or you want to provide multiple ways to compare objects that you do have control over) then use Comparator.

Otherwise you can use Comparable.

Make as shown.

  $(document).ready(function(){_x000D_
    $('#myModal').modal('show');_x000D_
_x000D_
    $('#myBtn').on('click', function(){_x000D_
      $('#myModal').modal('show');_x000D_
    });_x000D_
    _x000D_
  });_x000D_
<br/>_x000D_
_x000D_
<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<!DOCTYPE html>_x000D_
<html lang="en">_x000D_
<head>_x000D_
  <title>Bootstrap Example</title>_x000D_
  <meta charset="utf-8">_x000D_
  <meta name="viewport" content="width=device-width, initial-scale=1">_x000D_
  <link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css">_x000D_
  <script src="https://ajax.googleapis.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>_x000D_
  <script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js"></script>_x000D_
</head>_x000D_
<body>_x000D_
_x000D_
<div class="container">_x000D_
  <h2>Activate Modal with JavaScript</h2>_x000D_
  <!-- Trigger the modal with a button -->_x000D_
  <button type="button" class="btn btn-info btn-lg" id="myBtn">Open Modal</button>_x000D_
_x000D_
  <!-- Modal -->_x000D_
  <div class="modal fade" id="myModal" role="dialog">_x000D_
    <div class="modal-dialog">_x000D_
    _x000D_
      <!-- Modal content-->_x000D_
      <div class="modal-content">_x000D_
        <div class="modal-header">_x000D_
          <button type="button" class="close" data-dismiss="modal">&times;</button>_x000D_
          <h4 class="modal-title">Modal Header</h4>_x000D_
        </div>_x000D_
        <div class="modal-body">_x000D_
          <p>Some text in the modal.</p>_x000D_
        </div>_x000D_
_x000D_
      </div>_x000D_
      _x000D_
    </div>_x000D_
  </div>_x000D_
  _x000D_
</div>

public class Array {
    static int a[] = new int[101];
    int counter = 0;
    public int add(int num) {
        if (num <= 100) {
            Array.a[this.counter] = num;
            System.out.println(a[this.counter]);
            this.counter++;

            return add(num + 1);
        }
        return 0;
    }

    public static void main(String[] args) {
        Array c = new Array();
        c.add(1);
    }
}

One more way,

git rebase -i ad0389efc1a79b1f9c4dd6061dca6edc1d5bb78a (C's hash)
and
git push origin master  -f

pick the hash that you want to use it as a base, and the above command should make it interactive so you can squash all the top messages ( you need to leave the oldest )

You have to initialize the data directory by running the following command

mysqld --initialize [with random root password]

mysqld --initialize-insecure [with blank root password]

I tried pasting the .svn folder from the sub folder to the root folder. It works!!!

On Windows, you can easily install ffmpeg via chocolatey

choco install ffmpeg

Without admin rights the only way that worked for me is a bat file that contains the following code:

for /F "tokens=2* delims= " %%f IN ('reg query HKCU\Environment /v PATH ^| findstr /i path') do set OLD_SYSTEM_PATH=%%g
setx PATH "%USERPROFILE%\wev-tools;%OLD_SYSTEM_PATH%"

The code is the combination of the answers https://stackoverflow.com/a/45566845/4717152 and https://stackoverflow.com/a/10292113/4717152

You can probably just use the true command:

if [ "$a" -ge 10 ]; then
    true
elif [ "$a" -le 5 ]; then
    echo "1"
else
    echo "2"
fi

An alternative, in your example case (but not necessarily everywhere) is to re-order your if/else:

if [ "$a" -le 5 ]; then
    echo "1"
elif [ "$a" -lt 10 ]; then
    echo "2"
fi

public changeAttr(int id)
{
    list.Find(p => p.IdItem == id).FieldToModify = newValueForTheFIeld;
}

With:

• IdItem is the id of the element you want to modify

• FieldToModify is the Field of the item that you want to update.

• NewValueForTheField is exactly that, the new value.

(It works perfect for me, tested and implemented)

In addition to other options like console.assert or rolling your own, you can use invariant. It has a couple of unique features:

• It supports formatted error messages (using a %s specifier).
• In production environments (as determined by the Node.js or Webpack environment), the error message is optional, allowing for (slightly) smaller .js.

you can directly set boolean value equivalent to any string by System class and access it anywhere..

System.setProperty("n","false");
System.setProperty("y","true");

System.setProperty("yes","true");     
System.setProperty("no","false");

System.out.println(Boolean.getBoolean("n"));   //false
System.out.println(Boolean.getBoolean("y"));   //true   
 System.out.println(Boolean.getBoolean("no"));  //false
System.out.println(Boolean.getBoolean("yes"));  //true

To have newline in code you use _

Example:

Dim a As Integer
a = 500 _
  + 80 _
  + 90

MsgBox a

There's the android:label for the application, and the android:label for the launch activity. The former is what you see under Settings -> Applications -> Manage Applications on your device. The latter is what you see under Applications, and by extension in any shortcut to your application, e.g.

<application
    android:label="@string/turns_up_in_manage_apps" >
    <activity
        android:name=".MainActivity"
        android:label="@string/turns_up_in_shortcuts" >
        ...
    </activity>
</application>

Technically, you can too put image data in an img tag, using data URIs.

<img src="data:image/jpeg;base64,<?php echo base64_encode( $image_data ); ?>" />

There are some special circumstances where this could even be useful, although in most cases you're better off serving the image through a separate script like daiscog suggests.

The padding options padx and pady of the grid and pack methods can take a 2-tuple that represent the left/right and top/bottom padding.

Here's an example:

import tkinter as tk

class MyApp():
    def __init__(self):
        self.root = tk.Tk()
        l1 = tk.Label(self.root, text="Hello")
        l2 = tk.Label(self.root, text="World")
        l1.grid(row=0, column=0, padx=(100, 10))
        l2.grid(row=1, column=0, padx=(10, 100)) 

app = MyApp()
app.root.mainloop()

Note that, for PIPE being any command or sequence of commands, then:

if PIPE ; then
  # do one thing if PIPE returned with zero status ($?=0)
else 
  # do another thing if PIPE returned with non-zero status ($?!=0), e.g. error
fi 

For the record, [ expr ] is a shell builtin^† shorthand for test expr.

Since grep returns with status 0 in case of a match, and non-zero status in case of no matches, you can use:

if grep -lq '^MYSQL_ROLE=master' ; then 
  # do one thing 
else 
  # do another thing
fi 

Note the use of -l which only cares about the file having at least one match (so that grep returns as soon as it finds one match, without needlessly continuing to parse the input file.)

^†on some platforms [ expr ] is not a builtin, but an actual executable /bin/[ (whose last argument will be ]), which is why [ expr ] should contain blanks around the square brackets, and why it must be followed by one of the command list separators (;, &&, ||, |, &, newline)

If you're using HTML5, you can use the placeholder attribute.

<input type="text" name="user" placeholder="Username">

I would like to argue one point - that you cannot augment the original assembly - using Mono.Cecil you can inject [InternalsVisibleTo(...)] to the 3pty assembly. Note there might be legal implications - you're messing with 3pty assembly and technical implications - if the assembly has strong name you either need to strip it or re-sign it with different key.

 Install-Package Mono.Cecil

And the code like:

static readonly string[] s_toInject = {
  // alternatively "MyAssembly, PublicKey=0024000004800000... etc."
  "MyAssembly"
};

static void Main(string[] args) {
  const string THIRD_PARTY_ASSEMBLY_PATH = @"c:\folder\ThirdPartyAssembly.dll";

   var parameters = new ReaderParameters();
   var asm = ModuleDefinition.ReadModule(INPUT_PATH, parameters);
   foreach (var toInject in s_toInject) {
     var ca = new CustomAttribute(
       asm.Import(typeof(InternalsVisibleToAttribute).GetConstructor(new[] {
                      typeof(string)})));
     ca.ConstructorArguments.Add(new CustomAttributeArgument(asm.TypeSystem.String, toInject));
     asm.Assembly.CustomAttributes.Add(ca);
   }
   asm.Write(@"c:\folder-modified\ThirdPartyAssembly.dll");
   // note if the assembly is strongly-signed you need to resign it like
   // asm.Write(@"c:\folder-modified\ThirdPartyAssembly.dll", new WriterParameters {
   //   StrongNameKeyPair = new StrongNameKeyPair(File.ReadAllBytes(@"c:\MyKey.snk"))
   // });
}

My project should use the 'latest' for the submodule. On Mac OSX 10.11, git version 2.7.1, I did not need to go 'into' my submodule folder in order to collect its commits. I merely did a regular

git pull --rebase 

at the top level, and it correctly updated my submodule.

I had no luck with any of these, so after finding a solution, I wanted to add it to the prior answers. Python==3.8.6 MySQL==8.0.19

(Forgive my lack of SO formatting foo. Somebody please clean up.)

Note a couple of things:

First, the query to return column names is unforgiving of punctuation. Using ` backticks or leaving out ' quote around the 'schema_name' and 'table_name' will throw an "unknown column" error.

WHERE TABLE_SCHEMA = 'schema' AND TABLE_NAME = 'table'

Second, the column header names return as a single-entity tuple with all the column names concatenated in one quoted string. Convert to quoted list was easy, but not intuitive (for me at least).

headers_list = headers_result[0].split(",")

Third, cursor must be buffered or the "lazy" thing will not fetch your results as you need them. For very large tables, memory could be an issue. Perhaps chunking would solve that problem.

cur = db.cursor(buffered=True)

Last, all types of UNION attempts yielded errors for me. By zipping the whole mess into a list of dicts, it became trivial to write to a csv, using csv.DictWriter.

headers_sql = """   
SELECT 
GROUP_CONCAT(CONCAT(COLUMN_NAME) ORDER BY ORDINAL_POSITION)   
FROM INFORMATION_SCHEMA.COLUMNS   
WHERE TABLE_SCHEMA = 'schema' AND TABLE_NAME = 'table';   
"""" 

cur = db.cursor(buffered=True) 
cur.execute(header_sql) 
headers_result = cur.fetchone() 
headers_list = headers_result[0].split(",")

rows_sql = """   SELECT * FROM schema.table;   """" 

data = cur.execute(rows_sql) 
data_rows = cur.fetchall() 
data_as_list_of_dicts = [dict(zip(headers_list, row)) for row in data_rows]

with open(csv_destination_file, 'w', encoding='utf-8') as destination_file_opened: 
    dict_writer = csv.DictWriter(destination_file_opened, fieldnames=headers_list) 
    dict_writer.writeheader()   for dict in dict_list:
        dict_writer.writerow(dict)

Something else you can try if you are having issues encoding to 'utf-8' and want to go cell by cell you could try the following.

Python 2

(Where "df" is your DataFrame object.)

for column in df.columns:
    for idx in df[column].index:
        x = df.get_value(idx,column)
        try:
            x = unicode(x.encode('utf-8','ignore'),errors ='ignore') if type(x) == unicode else unicode(str(x),errors='ignore')
            df.set_value(idx,column,x)
        except Exception:
            print 'encoding error: {0} {1}'.format(idx,column)
            df.set_value(idx,column,'')
            continue

Then try:

df.to_csv(file_name)

You can check the encoding of the columns by:

for column in df.columns:
    print '{0} {1}'.format(str(type(df[column][0])),str(column))

Warning: errors='ignore' will just omit the character e.g.

IN: unicode('Regenexx\xae',errors='ignore')
OUT: u'Regenexx'

Python 3

for column in df.columns:
    for idx in df[column].index:
        x = df.get_value(idx,column)
        try:
            x = x if type(x) == str else str(x).encode('utf-8','ignore').decode('utf-8','ignore')
            df.set_value(idx,column,x)
        except Exception:
            print('encoding error: {0} {1}'.format(idx,column))
            df.set_value(idx,column,'')
            continue

Here is what the JSF javadocs have to say about the commandButton action attribute:

MethodExpression representing the application action to invoke when this component is activated by the user. The expression must evaluate to a public method that takes no parameters, and returns an Object (the toString() of which is called to derive the logical outcome) which is passed to the NavigationHandler for this application.

It would be illuminating to me if anyone can explain what that has to do with any of the answers on this page. It seems pretty clear that action refers to some page's filename and not a method.

In case you need to parse it from a file, I find the best solution to use a HashMap<String, String> to use it inside your java code for better manipultion.

Try out this code:

public HashMap<String, String> myMethodName() throws FileNotFoundException
{
    String path = "absolute path to your file";
    BufferedReader bufferedReader = new BufferedReader(new FileReader(path));

    Gson gson = new Gson();
    HashMap<String, String> json = gson.fromJson(bufferedReader, HashMap.class);
    return json;
}

I had the same problem. It worked for me when i removed the private modifier from the Autowired objects.

from jameswyse at https://github.com/angular/material/issues/3310

HTML

<input id="fileInput" name="file" type="file" class="ng-hide" multiple>
<md-button id="uploadButton" class="md-raised md-primary"> Choose Files </md-button>

CONTROLLER

    var link = function (scope, element, attrs) {
    const input = element.find('#fileInput');
    const button = element.find('#uploadButton');

    if (input.length && button.length) {
        button.click((e) => input.click());
    }
}

Worked for me.

Tested and Working procedure:

Goto the file path ..\apache-tomcat-7.0.x\webapps\ROOT\index.jsp

remove the whole content or declare the below lines of code at the top of the index.jsp

<% response.sendRedirect("http://yourRedirectionURL"); %>

Please note that in jsp file you need to start the above line with <% and end with %>

On mac this worked for me:

git stash list(see all your stashs)

git stash list

git stash apply (just the number that you want from your stash list)

like this:

git stash apply 1

    $.post("test.php", { 'choices[]': ["Jon", "Susan"] });

So I would just iterate over the checked boxes and build the array. Something like.

       var data = { 'user_ids[]' : []};
        $(":checked").each(function() {
       data['user_ids[]'].push($(this).val());
       });
        $.post("ajax.php", data);

Alternatively if one does not see "Untrust App Developer" dialog:

Go to your iPhone > Settings > General > Profile > "[email protected]" > Trust

update q
set q.QuestionID = a.QuestionID
from QuestionTrackings q
inner join QuestionAnswers a
on q.AnswerID = a.AnswerID
where q.QuestionID is null -- and other conditions you might want

I recommend to check what the result set to update is before running the update (same query, just with a select):

select *
from QuestionTrackings q
inner join QuestionAnswers a
on q.AnswerID = a.AnswerID
where q.QuestionID is null -- and other conditions you might want

Particularly whether each answer id has definitely only 1 associated question id.

You can make use of environment variables and the ConfigurationBuilder class in your Startup constructor like this:

public Startup(IHostingEnvironment env)
{
    var builder = new ConfigurationBuilder()
    .SetBasePath(env.ContentRootPath)
    .AddJsonFile("appsettings.json", optional: true, reloadOnChange: true)
    .AddJsonFile($"appsettings.{env.EnvironmentName}.json", optional: true)
    .AddEnvironmentVariables();
    this.configuration = builder.Build();
}

Then you create an appsettings.xxx.json file for every environment you need, with "xxx" being the environment name. Note that you can put all global configuration values in your "normal" appsettings.json file and only put the environment specific stuff into these new files.

Now you only need an environment variable called ASPNETCORE_ENVIRONMENT with some specific environment value ("live", "staging", "production", whatever). You can specify this variable in your project settings for your development environment, and of course you need to set it in your staging and production environments also. The way you do it there depends on what kind of environment this is.

UPDATE: I just realized you want to choose the appsettings.xxx.json based on your current build configuration. This cannot be achieved with my proposed solution and I don't know if there is a way to do this. The "environment variable" way, however, works and might as well be a good alternative to your approach.

This way work for me with Eclipse in Android developer tool from Google -righ click - property - java build path - add external JAR

point to: android-support-v7-appcompat.jar in /sdk/extras/android/support/v7/appcompat/libs

Then

import android.support.v7.app.ActionBarActivity;

You can always encrypt data on the client side. Please note that not all of the data have to be encrypted because it has a performance issue.

Here's some more benchmarks for Docker based memcached server versus host native memcached server using Twemperf benchmark tool https://github.com/twitter/twemperf with 5000 connections and 20k connection rate

Connect time overhead for docker based memcached seems to agree with above whitepaper at roughly twice native speed.

Twemperf Docker Memcached

Connection rate: 9817.9 conn/s
Connection time [ms]: avg 341.1 min 73.7 max 396.2 stddev 52.11
Connect time [ms]: avg 55.0 min 1.1 max 103.1 stddev 28.14
Request rate: 83942.7 req/s (0.0 ms/req)
Request size [B]: avg 129.0 min 129.0 max 129.0 stddev 0.00
Response rate: 83942.7 rsp/s (0.0 ms/rsp)
Response size [B]: avg 8.0 min 8.0 max 8.0 stddev 0.00
Response time [ms]: avg 28.6 min 1.2 max 65.0 stddev 0.01
Response time [ms]: p25 24.0 p50 27.0 p75 29.0
Response time [ms]: p95 58.0 p99 62.0 p999 65.0

Twemperf Centmin Mod Memcached

Connection rate: 11419.3 conn/s
Connection time [ms]: avg 200.5 min 0.6 max 263.2 stddev 73.85
Connect time [ms]: avg 26.2 min 0.0 max 53.5 stddev 14.59
Request rate: 114192.6 req/s (0.0 ms/req)
Request size [B]: avg 129.0 min 129.0 max 129.0 stddev 0.00
Response rate: 114192.6 rsp/s (0.0 ms/rsp)
Response size [B]: avg 8.0 min 8.0 max 8.0 stddev 0.00
Response time [ms]: avg 17.4 min 0.0 max 28.8 stddev 0.01
Response time [ms]: p25 12.0 p50 20.0 p75 23.0
Response time [ms]: p95 28.0 p99 28.0 p999 29.0

Here's bencmarks using memtier benchmark tool

memtier_benchmark docker Memcached

4         Threads
50        Connections per thread
10000     Requests per thread
Type        Ops/sec     Hits/sec   Misses/sec      Latency       KB/sec
------------------------------------------------------------------------
Sets       16821.99          ---          ---      1.12600      2271.79
Gets      168035.07    159636.00      8399.07      1.12000     23884.00
Totals    184857.06    159636.00      8399.07      1.12100     26155.79

memtier_benchmark Centmin Mod Memcached

4         Threads
50        Connections per thread
10000     Requests per thread
Type        Ops/sec     Hits/sec   Misses/sec      Latency       KB/sec
------------------------------------------------------------------------
Sets       28468.13          ---          ---      0.62300      3844.59
Gets      284368.51    266547.14     17821.36      0.62200     39964.31
Totals    312836.64    266547.14     17821.36      0.62200     43808.90

Solution:

var answerInt = [];
var answerString = "1,2,3,4";
answerString.split(',').forEach(function (item) {
   answerInt.push(parseInt(item))
});

I've used a DOS command line to do this. Two lines, actually. The first one to make the "current directory" the folder where the file is - or the root folder of a group of folders where the file can be. The second line does the search.

CD C:\TheFolder
C:\TheFolder>FINDSTR /L /S /I /N /C:"TheString" *.PRG

You can find details about the parameters at this link.

Hope it helps!

I also had the same problem. My maven had tomcat7 plugin but the JRE environment was 1.6. I changed my tomcat7 to tomcat6 and the error was gone.

use

range(count)

int and float are not iterable

That's because you should pass a function, not a string:

function funcName() {
    alert("test");
}

setInterval(funcName, 10000);

Your code has two problems:

• var func = funcName(); calls the function immediately and assigns the return value.
• Just "func" is invalid even if you use the bad and deprecated eval-like syntax of setInterval. It would be setInterval("func()", 10000) to call the function eval-like.

First of all Filezilla is an FTP/SFTP client/server. We will need to use the client for this purpose.

1) Download the client from the URL: https://filezilla-project.org/

2) Go to AWS management console and then EC2. Select the instance that you want to access and then copy the DNS or IP address of the instance and then paste it in Filezilla host name.

Follow Image: Amazon Instance Access via FileZilla

3) Then, enter the username for the instance that you have created, For Amazon-ami it will be ec2-user and for other OS it would be different. Then, enter the password and port which will be 21 or 22.

4) Then, it will ask for the key, which is in pem format just select the .pem file and then it will confirm authentication. Click on Yes and then you are Done.

Note: In your EC2 Security group allow port number 21 and 22 whichever required for FTP access.

Inside OnCreate, add:

 webview.getSettings().setSupportZoom(true);
 webview.getSettings().setBuiltInZoomControls(true);
 webview.getSettings().setDisplayZoomControls(false);

Inside the html document, add:

<html>
<head>
<meta name="viewport" content="width=device-width, initial-scale=1, maximum-scale=2, user-scalable=yes">
</head>
</html>

Inside javascript, omit:

//event.preventDefault ? event.preventDefault() : (event.returnValue = false);

How about checking this before doing the redirect:

if (!Response.IsRequestBeingRedirected)
{
   //do the redirect
}

In Python 2

>>> plain_string = "Hi!"
>>> unicode_string = u"Hi!"
>>> type(plain_string), type(unicode_string)
(<type 'str'>, <type 'unicode'>)

^ This is the difference between a byte string (plain_string) and a unicode string.

>>> s = "Hello!"
>>> u = unicode(s, "utf-8")

^ Converting to unicode and specifying the encoding.

In Python 3

All strings are unicode. The unicode function does not exist anymore. See answer from @Noumenon

Assuming a C-style array a of size N, with elements of a type implicitly convertible from 0, the following sets all the elements to values constructed from 0.

std::fill(a, a+N, 0);

Note that this is not the same as "emptying" or "clearing".

Edit: Following james Kanze's suggestion, in C++11 you could use the more idiomatic alternative

std::fill( std::begin( a ), std::end( a ), 0 );

In the absence of C++11, you could roll out your own solution along these lines:

template <typename T, std::size_t N> T* end_(T(&arr)[N]) { return arr + N; }

template <typename T, std::size_t N> T* begin_(T(&arr)[N]) { return arr; }

std::fill( begin_( a ), end_( a ), 0 );

let delta = Math.floor(Math.abs(start.getTime() - end.getTime()) / 1000);
let hours = Math.floor(delta / 3600);
delta -= hours * 3600;
let minutes = Math.floor(delta / 60);
delta -= minutes * 60;
let seconds = delta;
if (hours.toString().length === 1) {
  hours = `0${hours}`;
}
if (minutes.toString().length === 1) {
  minutes = `0${minutes}`;
}
if (seconds.toString().length === 1) {
  seconds = `0${seconds}`;
}
const recordingTime = `${hours}:${minutes}:${seconds}`;

Closing the solution completely and rerunning the project solved my issue.

@ suppresses the error message thrown by the function. fopen throws an error when the file doesn't exit. @ symbol makes the execution to move to the next line even the file doesn't exists. My suggestion would be not using this in your local environment when you develop a PHP code.

Because in Python 3, print statement has been replaced with a print() function, with keyword arguments to replace most of the special syntax of the old print statement. So you have to write it as

print("Hello World")

But if you write this in a program and someone using Python 2.x tries to run it, they will get an error. To avoid this, it is a good practice to import print function:

from __future__ import print_function

Now your code works on both 2.x & 3.x.

Check out below examples also to get familiar with print() function.

Old: print "The answer is", 2*2
New: print("The answer is", 2*2)

Old: print x,           # Trailing comma suppresses newline
New: print(x, end=" ")  # Appends a space instead of a newline

Old: print              # Prints a newline
New: print()            # You must call the function!

Old: print >>sys.stderr, "fatal error"
New: print("fatal error", file=sys.stderr)

Old: print (x, y)       # prints repr((x, y))
New: print((x, y))      # Not the same as print(x, y)!

Source: What’s New In Python 3.0?

I don't have a reference for it handy, but script tags are processed in order, and so if you put your $(document).ready(function1) in a script tag after the script tags that define function1, etc., you should be good to go.

<script type='text/javascript' src='...'></script>
<script type='text/javascript' src='...'></script>
<script type='text/javascript'>
$(document).ready(function1);
</script>

Of course, another approach would be to ensure that you're using only one script tag, in total, by combining files as part of your build process. (Unless you're loading the other ones from a CDN somewhere.) That will also help improve the perceived speed of your page.

EDIT: Just realized that I didn't actually answer your question: I don't think there's a cross-browser event that's fired, no. There is if you work hard enough, see below. You can test for symbols and use setTimeout to reschedule:

<script type='text/javascript'>
function fireWhenReady() {
    if (typeof function1 != 'undefined') {
        function1();
    }
    else {
        setTimeout(fireWhenReady, 100);
    }
}
$(document).ready(fireWhenReady);
</script>

...but you shouldn't have to do that if you get your script tag order correct.

Update: You can get load notifications for script elements you add to the page dynamically if you like. To get broad browser support, you have to do two different things, but as a combined technique this works:

function loadScript(path, callback) {

    var done = false;
    var scr = document.createElement('script');

    scr.onload = handleLoad;
    scr.onreadystatechange = handleReadyStateChange;
    scr.onerror = handleError;
    scr.src = path;
    document.body.appendChild(scr);

    function handleLoad() {
        if (!done) {
            done = true;
            callback(path, "ok");
        }
    }

    function handleReadyStateChange() {
        var state;

        if (!done) {
            state = scr.readyState;
            if (state === "complete") {
                handleLoad();
            }
        }
    }
    function handleError() {
        if (!done) {
            done = true;
            callback(path, "error");
        }
    }
}

In my experience, error notification (onerror) is not 100% cross-browser reliable. Also note that some browsers will do both mechanisms, hence the done variable to avoid duplicate notifications.

You can manage to do this without any external JS library with the help of JS Date method like following:

var date = new Date(0);_x000D_
date.setSeconds(45); // specify value for SECONDS here_x000D_
var timeString = date.toISOString().substr(11, 8);_x000D_
console.log(timeString)

You get a SIGABRT error whenever you have a disconnected outlet. Click on your view controller in the storyboard and go to connections in the side panel (the arrow symbol). See if you have an extra outlet there, a duplicate, or an extra one that's not connected. If it's not that then maybe you haven't connected your outlets to your code correctly.

Just remember that SIGABRT happens when you are trying to call an outlet (button, view, textfield, etc) that isn't there.

In simple words define Training set, Test set, Validation set

Training set: Is used for finding Nearest neighbors. Validation set: Is for finding different k which is applying to train set. Test set: Is used for finding the maximum accuracy and unseen data in future.

This has been driving me crazy, but I finally put all the pieces together. As of 1/25/2015, I've confirmed that it is possible to list the images in the docker V2 registry ( exactly as @jonatan mentioned, above. )

I would up-vote that answer, if I had the rep for it.

Instead, I'll expand on the answer. Since registry V2 is made with security in mind, I think it's appropriate to include how to set it up with a self signed cert, and run the container with that cert in order that an https call can be made to it with that cert:

This is the script I actually use to start the registry:

sudo docker stop registry
sudo docker rm -v registry
sudo docker run -d \
  -p 5001:5001 \
  -p 5000:5000 \
  --restart=always \
  --name registry \
  -v /data/registry:/var/lib/registry \
  -v /root/certs:/certs \
  -e REGISTRY_HTTP_TLS_CERTIFICATE=/certs/domain.crt \
  -e REGISTRY_HTTP_TLS_KEY=/certs/domain.key \ 
  -e REGISTRY_HTTP_DEBUG_ADDR=':5001' \
  registry:2.2.1

This may be obvious to some, but I always get mixed up with keys and certs. The file that needs to be referenced to make the call @jonaton mentions above**, is the domain.crt listed above. ( Since I put domain.crt in /root, I made a copy into the user directory where it could be accessed. )

curl --cacert ~/domain.crt https://myregistry:5000/v2/_catalog
> {"repositories":["redis","ubuntu"]}

**The command above has been changed: -X GET didn't actually work when I tried it.

Note: https://myregistry:5000 ( as above ) must match the domain given to the cert generated.

Regarding “thought leaders”: Linus emphatically advocates line wrapping for the full commit message:

[…] we use 72-character columns for word-wrapping, except for quoted material that has a specific line format.

The exceptions refers mainly to “non-prose” text, that is, text that was not typed by a human for the commit — for example, compiler error messages.

$ bundle update json
$ bundle install

The database.yml is the file where you set up all the information to connect to the database. It differs depending on the kind of DB you use. You can find more information about this in the Rails Guide or any tutorial explaining how to setup a rails project.

The information in the database.yml file is scoped by environment, allowing you to get a different setting for testing, development or production. It is important that you keep those distinct if you don't want the data you use for development deleted by mistake while running your test suite.

Regarding source control, you should not commit this file but instead create a template file for other developers (called database.yml.template). When deploying, the convention is to create this database.yml file in /shared/config directly on the server.

With SVN: svn propset svn:ignore config "database.yml"

With Git: Add config/database.yml to the .gitignore file or with git-extra git ignore config/database.yml

... and now, some examples:

SQLite

adapter: sqlite3
database: db/db_dev_db.sqlite3
pool: 5
timeout: 5000

MYSQL

adapter: mysql
database: my_db
hostname: 127.0.0.1
username: root
password: 
socket: /tmp/mysql.sock
pool: 5
timeout: 5000

MongoDB with MongoID (called mongoid.yml, but basically the same thing)

host: <%= ENV['MONGOID_HOST'] %>
port: <%= ENV['MONGOID_PORT'] %>
username: <%= ENV['MONGOID_USERNAME'] %>
password: <%= ENV['MONGOID_PASSWORD'] %>
database: <%= ENV['MONGOID_DATABASE'] %>
# slaves:
#   - host: slave1.local
#     port: 27018
#   - host: slave2.local
#     port: 27019

In Laravel 5.5 create .htacess file in your root directory and placed the following code:- Reference Link

<IfModule mod_rewrite.c>
    <IfModule mod_negotiation.c>
        Options -MultiViews
    </IfModule>

    RewriteEngine On

    RewriteCond %{REQUEST_FILENAME} -d [OR]
    RewriteCond %{REQUEST_FILENAME} -f
    RewriteRule ^ ^$1 [N]

    RewriteCond %{REQUEST_URI} (\.\w+$) [NC]
    RewriteRule ^(.*)$ public/$1 

    RewriteCond %{REQUEST_FILENAME} !-d
    RewriteCond %{REQUEST_FILENAME} !-f
    RewriteRule ^ server.php

</IfModule>

It provides nothing else but a standardization of the data. The values it creates are known under several different names, one of them being z-scores ("Z" because the normal distribution is also known as the "Z distribution").

More can be found here:

http://en.wikipedia.org/wiki/Standard_score

The answer comes from the javadoc of ZoneId (emphasis mine) ...

A ZoneId is used to identify the rules used to convert between an Instant and a LocalDateTime. There are two distinct types of ID:

• Fixed offsets - a fully resolved offset from UTC/Greenwich, that uses the same offset for all local date-times
• Geographical regions - an area where a specific set of rules for finding the offset from UTC/Greenwich apply

Most fixed offsets are represented by ZoneOffset. Calling normalized() on any ZoneId will ensure that a fixed offset ID will be represented as a ZoneOffset.

... and from the javadoc of ZoneId#of (emphasis mine):

This method parses the ID producing a ZoneId or ZoneOffset. A ZoneOffset is returned if the ID is 'Z', or starts with '+' or '-'.

The argument id is specified as "UTC", therefore it will return a ZoneId with an offset, which also presented in the string form:

System.out.println(now.withZoneSameInstant(ZoneOffset.UTC));
System.out.println(now.withZoneSameInstant(ZoneId.of("UTC")));

Outputs:

2017-03-10T08:06:28.045Z
2017-03-10T08:06:28.045Z[UTC]

As you use the equals method for comparison, you check for object equivalence. Because of the described difference, the result of the evaluation is false.

When the normalized() method is used as proposed in the documentation, the comparison using equals will return true, as normalized() will return the corresponding ZoneOffset:

Normalizes the time-zone ID, returning a ZoneOffset where possible.

now.withZoneSameInstant(ZoneOffset.UTC)
    .equals(now.withZoneSameInstant(ZoneId.of("UTC").normalized())); // true

As the documentation states, if you use "Z" or "+0" as input id, of will return the ZoneOffset directly and there is no need to call normalized():

now.withZoneSameInstant(ZoneOffset.UTC).equals(now.withZoneSameInstant(ZoneId.of("Z"))); //true
now.withZoneSameInstant(ZoneOffset.UTC).equals(now.withZoneSameInstant(ZoneId.of("+0"))); //true

To check if they store the same date time, you can use the isEqual method instead:

now.withZoneSameInstant(ZoneOffset.UTC)
    .isEqual(now.withZoneSameInstant(ZoneId.of("UTC"))); // true

Sample

System.out.println("equals - ZoneId.of(\"UTC\"): " + nowZoneOffset
        .equals(now.withZoneSameInstant(ZoneId.of("UTC"))));
System.out.println("equals - ZoneId.of(\"UTC\").normalized(): " + nowZoneOffset
        .equals(now.withZoneSameInstant(ZoneId.of("UTC").normalized())));
System.out.println("equals - ZoneId.of(\"Z\"): " + nowZoneOffset
        .equals(now.withZoneSameInstant(ZoneId.of("Z"))));
System.out.println("equals - ZoneId.of(\"+0\"): " + nowZoneOffset
        .equals(now.withZoneSameInstant(ZoneId.of("+0"))));
System.out.println("isEqual - ZoneId.of(\"UTC\"): "+ nowZoneOffset
        .isEqual(now.withZoneSameInstant(ZoneId.of("UTC"))));

Output:

equals - ZoneId.of("UTC"): false
equals - ZoneId.of("UTC").normalized(): true
equals - ZoneId.of("Z"): true
equals - ZoneId.of("+0"): true
isEqual - ZoneId.of("UTC"): true

Swift 3

private let NUMBER_COUNT_DOWN   = 3

var countDownLabel = UILabel()
var countDown = NUMBER_COUNT_DOWN
var timer:Timer?


private func countDown(time: Double)
{
    countDownLabel.frame = CGRect(x: 0, y: 0, width: 300, height: 300)
    countDownLabel.font = UIFont.systemFont(ofSize: 300)
    countDownLabel.textColor = .black
    countDownLabel.center = CGPoint(x: self.view.frame.width / 2, y: self.view.frame.height / 2)

    countDownLabel.textAlignment = .center
    self.view.addSubview(countDownLabel)
    view.bringSubview(toFront: countDownLabel)

    timer = Timer.scheduledTimer(timeInterval: time, target: self, selector: #selector(updateCountDown), userInfo: nil, repeats: true)
}

func updateCountDown() {
    if(countDown > 0) {
        countDownLabel.text = String(countDown)
        countDown = countDown - 1
    } else {
        removeCountDownLable()
    }
}

private func removeCountDownLable() {
    countDown = NUMBER_COUNT_DOWN
    countDownLabel.text = ""
    countDownLabel.removeFromSuperview()

    timer?.invalidate()
    timer = nil
}

    public static T IsNull<T>(this T DefaultValue, T InsteadValue)
    {

        object obj="kk";

        if((object) DefaultValue == DBNull.Value)
        {
            obj = null;
        }

        if (obj==null || DefaultValue==null || DefaultValue.ToString()=="")
        {
            return InsteadValue;
        }
        else
        {
            return DefaultValue;
        }

    }

//This method can work with DBNull and null value. This method is question's answer

The difference between:

parser.add_argument("--debug", help="Debug", nargs='?', type=int, const=1, default=7)

and

parser.add_argument("--debug", help="Debug", nargs='?', type=int, const=1)

is thus:

myscript.py => debug is 7 (from default) in the first case and "None" in the second

myscript.py --debug => debug is 1 in each case

myscript.py --debug 2 => debug is 2 in each case

I thought my simple "all possible combination generator" might help someone, i think its a really good example for building something bigger and better

you can change N (characters) to any you like by just removing/adding from string array (you can change it to int as well). Current amount of characters is 36

you can also change K (size of the generated combinations) by just adding more loops, for each element, there must be one extra loop. Current size is 4

#include<iostream>

using namespace std;

int main() {
string num[] = {"0","1","2","3","4","5","6","7","8","9","a","b","c","d","e","f","g","h","i","j","k","l","m","n","o","p","q","r","s","t","u","v","w","x","y","z" };

for (int i1 = 0; i1 < sizeof(num)/sizeof(string); i1++) {
    for (int i2 = 0; i2 < sizeof(num)/sizeof(string); i2++) {
        for (int i3 = 0; i3 < sizeof(num)/sizeof(string); i3++) {
            for (int i4 = 0; i4 < sizeof(num)/sizeof(string); i4++) {
                cout << num[i1] << num[i2] << num[i3] << num[i4] << endl;
            }
        }
    }
}}

Result

0: A A A
1: B A A
2: C A A
3: A B A
4: B B A
5: C B A
6: A C A
7: B C A
8: C C A
9: A A B
...

just keep in mind that the amount of combinations can be ridicules.

--UPDATE--

a better way to generate all possible combinations would be with this code, which can be easily adjusted and configured in the "variables" section of the code.

#include<iostream>
#include<math.h>

int main() {
    //VARIABLES
    char chars[] = { 'A', 'B', 'C' };
    int password[4]{0};

    //SIZES OF VERIABLES
    int chars_length = sizeof(chars) / sizeof(char);
    int password_length = sizeof(password) / sizeof(int);

    //CYCKLE TROUGH ALL OF THE COMBINATIONS
    for (int i = 0; i < pow(chars_length, password_length); i++){
       
        //CYCKLE TROUGH ALL OF THE VERIABLES IN ARRAY
        for (int i2 = 0; i2 < password_length; i2++) {
            //IF VERIABLE IN "PASSWORD" ARRAY IS THE LAST VERIABLE IN CHAR "CHARS" ARRRAY
            if (password[i2] == chars_length) {
                //THEN INCREMENT THE NEXT VERIABLE IN "PASSWORD" ARRAY
                password[i2 + 1]++;
                //AND RESET THE VERIABLE BACK TO ZERO
                password[i2] = 0;
            }}

        //PRINT OUT FIRST COMBINATION
        std::cout << i << ": ";
        for (int i2 = 0; i2 < password_length; i2++) {
            std::cout << chars[password[i2]] << " ";
        }
        std::cout << "\n";

        //INCREMENT THE FIRST VERIABLE IN ARRAY
        password[0]++;
    }}

    

It is possible to register an hook to make the last error or warning visible.

function shutdown(){
  var_dump(error_get_last());
}

register_shutdown_function('shutdown');

adding this code to the beginning of you index.php will help you debug the problems.

With library(lubridate), numeric representations of date and time saved as the number of seconds since 1970-01-01 00:00:00 UTC, can be coerced into dates with as_datetime():

lubridate::as_datetime(1352068320)

[1] "2012-11-04 22:32:00 UTC"

It's indeed a very bad design, let alone singleton by itself is bad design.

However, if you really do need to delay execution, here's what you may do:

BackgroundWorker barInvoker = new BackgroundWorker();
barInvoker.DoWork += delegate
    {
        Thread.Sleep(TimeSpan.FromSeconds(1));
        bar();
    };
barInvoker.RunWorkerAsync();

This will, however, invoke bar() on a separate thread. If you need to call bar() in the original thread you might need to move bar() invocation to RunWorkerCompleted handler or do a bit of hacking with SynchronizationContext.

Android 3.2 introduces a new approach to screen sizes,the numbers describing the screen size are all in “dp” units.Mostly we can use

smallest width dp: the smallest width available for application layout in “dp” units; this is the smallest width dp that you will ever encounter in any rotation of the display.

To create one right click on res >>> new >>> Android resource directory

From Available qualifiers window move Smallest Screen Width to Chosen qualifiers

In Screen width window just write the "dp" value starting from you would like Android Studio to use that dimens.

Than change to Project view,right click on your new created resource directory

new >>> Values resource file enter a new file name dimens.xml and you are done.

Execute the following commands (tested on centos 6.5):

yum install install unixodbc-dev
yum install gcc-c++
yum install python-devel
pip install --allow-external pyodbc --allow-unverified pyodbc pyodbc

check whether $DISPLAY variable is set or not, with the below command:

echo $DISPLAY

if the display variable is not set, run the below command to set, (even if it is set, you can have below one for your session)

export DISPLAY=:0.0

in putty also have the x display location as :0.0

A little clearer... A software program that has kernel mode access has total access to all of the computer's data and its hardware.

Since Windows Vista Microsoft has stopped any and all I/O processes from accessing the kernel (ring 0) directly ever again. The closest we get is a folder created as a virtual kernel access partition, but technically no access to kernel itself; the kernel meets halfway.

This is because the software itself dictates which token to use, so if it asks for an administrator access token, instead of just allowing communications with the kernel like on Windows XP you are prompted to allow access to the kernel, each and every time. Changing UAC could reduce prompts, but never the kernel prompts.

Even when you login as an Administrator, you are running processes as a standard user until prompted to elevate the rights you have. I believe logged in as the administrator saves you from entering the credentials. But it also writes to the administrator users folder structure.

Kernel access is similar to root access in Linux. When you elevate your permissions you are isolating yourself from the root of C:\ and whatever lovely environment variables are contained within.

If you remember BSODs this was the OS shutting down when it believed a bad I/O reached the kernel.

You can use:

String.prototype.replaceAll = function(search, replace) {
if (replace === undefined) {
    return this.toString();
}
return this.split(search).join(replace);
}

I was facing the same problem and the challenge in my case was to configure Jacoco correctly and to configure the right parameters for Sonar. I will briefly explain, how I finally got SonarQube to display the test results and test coverage correctly.

In your project you need the Jacoco plugin in your pom or parent pom (you already got this). Moreover, you need the maven-surefire-plugin, which is used to display test results. All test reports are automatically generated when you run the maven build. The tricky part is to find the right parameters for Sonar. Not all parameters seem to work with regular expressions and you have to use a comma separated list for those (documentation is not really good in my opinion). Here is the list of parameters I have used (I used them from Bamboo, you might omit the "-D" if you use a sonar.properties file):

-Dsonar.branch.target=master (in newer version of SQ I had to remove this, so that master branch is analyzed correctly; I used auto branch checkbox in bamboo instead)
-Dsonar.working.directory=./target/sonar
-Dsonar.java.binaries=**/target/classes
-Dsonar.sources=./service-a/src,./service-b/src,./service-c/src,[..]
-Dsonar.exclusions=**/data/dto/**
-Dsonar.tests=.
-Dsonar.test.inclusions=**/*Test.java [-> all your tests have to end with "Test"]
-Dsonar.junit.reportPaths=./service-a/target/surefire-reports,./service-b/target/surefire-reports,
./service-c/target/surefire-reports,[..]
-Dsonar.jacoco.reportPaths=./service-a/target/jacoco.exec,./service-b/target/jacoco.exec,
./service-c/target/jacoco.exec,[..]
-Dsonar.projectVersion=${bamboo.buildNumber}
-Dsonar.coverage.exclusions=**/src/test/**,**/common/**
-Dsonar.cpd.exclusions=**/*Dto.java,**/*Entity.java,**/common/**

If you are using Lombok in your project, than you also need a lombok.config file to get the correct code coverage. The lombok.config file is located in the root directory of your project with the following content:

config.stopBubbling = true
lombok.addLombokGeneratedAnnotation = true

The WHERE clause is misplaced, it has to follow the table references and JOIN operations.

Something like this:

 FROM tartikel p1 
 JOIN tartikelpict p2 
   ON p1.kArtikel = p2.kArtikel 
  AND p2.nNr = 1
WHERE p1.dErstellt >= DATE(NOW()) - INTERVAL 7 DAY
ORDER BY p1.kArtikel DESC

EDIT (three plus years later)

The above essentially answers the question "I tried to add a WHERE clause to my query and now the query is returning an error, how do I fix it?"

As to a question about writing a condition that checks a date range of "last 7 days"...

That really depends on interpreting the specification, what the datatype of the column in the table is (DATE or DATETIME) and what data is available... what should be returned.

To summarize: the general approach is to identify a "start" for the date/datetime range, and "end" of that range, and reference those in a query. Let's consider something easier... all rows for "yesterday".

If our column is DATE type. Before we incorporate an expression into a query, we can test it in a simple SELECT

 SELECT DATE(NOW()) + INTERVAL -1 DAY 

and verify the result returned is what we expect. Then we can use that same expression in a WHERE clause, comparing it to a DATE column like this:

 WHERE datecol = DATE(NOW()) + INTERVAL -1 DAY

For a DATETIME or TIMESTAMP column, we can use >= and < inequality comparisons to specify a range

 WHERE datetimecol >= DATE(NOW()) + INTERVAL -1 DAY
   AND datetimecol <  DATE(NOW()) + INTERVAL  0 DAY

For "last 7 days" we need to know if that mean from this point right now, back 7 days ... e.g. the last 7*24 hours , including the time component in the comparison, ...

 WHERE datetimecol >= NOW() + INTERVAL -7 DAY
   AND datetimecol <  NOW() + INTERVAL  0 DAY

the last seven complete days, not including today

 WHERE datetimecol >= DATE(NOW()) + INTERVAL -7 DAY
   AND datetimecol <  DATE(NOW()) + INTERVAL  0 DAY

or past six complete days plus so far today ...

 WHERE datetimecol >= DATE(NOW()) + INTERVAL -6 DAY
   AND datetimecol <  NOW()       + INTERVAL  0 DAY

I recommend testing the expressions on the right side in a SELECT statement, we can use a user-defined variable in place of NOW() for testing, not being tied to what NOW() returns so we can test borders, across week/month/year boundaries, and so on.

SET @clock = '2017-11-17 11:47:47' ;

SELECT DATE(@clock)
     , DATE(@clock) + INTERVAL -7 DAY 
     , @clock + INTERVAL -6 DAY 

Once we have expressions that return values that work for "start" and "end" for our particular use case, what we mean by "last 7 days", we can use those expressions in range comparisons in the WHERE clause.

(Some developers prefer to use the DATE_ADD and DATE_SUB functions in place of the + INTERVAL val DAY/HOUR/MINUTE/MONTH/YEAR syntax.

And MySQL provides some convenient functions for working with DATE, DATETIME and TIMESTAMP datatypes... DATE, LAST_DAY,

Some developers prefer to calculate the start and end in other code, and supply string literals in the SQL query, such that the query submitted to the database is

  WHERE datetimecol >= '2017-11-10 00:00'
    AND datetimecol <  '2017-11-17 00:00'

And that approach works too. (My preference would be to explicitly cast those string literals into DATETIME, either with CAST, CONVERT or just the + INTERVAL trick...

  WHERE datetimecol >= '2017-11-10 00:00' + INTERVAL 0 SECOND
    AND datetimecol <  '2017-11-17 00:00' + INTERVAL 0 SECOND

The above all assumes we are storing "dates" in appropriate DATE, DATETIME and/or TIMESTAMP datatypes, and not storing them as strings in variety of formats e.g. 'dd/mm/yyyy', m/d/yyyy, julian dates, or in sporadically non-canonical formats, or as a number of seconds since the beginning of the epoch, this answer would need to be much longer.

My problem was with extra </div> tag inside the first tab.

If you are using the plugin chartjs-plugin-datalabels then the following code options object will help

Make sure you import import 'chartjs-plugin-datalabels'; in your typescript file or add reference to <script src="chartjs-plugin-datalabels.js"></script> in your javascript file.

options: {
    maintainAspectRatio: false,
    responsive: true,
    scales: {
      yAxes: [{
        ticks: {
          beginAtZero: true,
        }
      }]
    },
    plugins: {
      datalabels: {
        anchor: 'end',
        align: 'top',
        formatter: Math.round,
        font: {
          weight: 'bold'
        }
      }
    }
  }

Try this:

$r = Page()->getInstanceByName($page);

It worked for me in a similar case.

double smallest;
if(a<b && a<c){
    smallest = a;
}else if(b<c && b<a){
    smallest = b;
}else{
    smallest = c;
}

can be improved to:

double smallest;
if(a<b && a<c){
smallest = a;
}else if(b<c){
    smallest = b;
}else{
    smallest = c;
}

This is the simplest way you can have your own javascript function be called when an onSubmit occurs.

HTML

<form>
    <input type="text" name="name">
    <input type="submit" name="submit">
</form>

JavaScript

window.onload = function() {
    var form = document.querySelector("form");
    form.onsubmit = submitted.bind(form);
}

function submitted(event) {
    event.preventDefault();
}

You can use :+ to append element to array and +: to prepend it:

0 +: array :+ 4

should produce:

res3: Array[Int] = Array(0, 1, 2, 3, 4)

It's the same as with any other implementation of Seq.

If the input happens to be in a bootstrap modal dialog, the answer is different. Copying from How to Set focus to first text input in a bootstrap modal after shown this is what is required:

$('#myModal').on('shown.bs.modal', function () {
  $('#textareaID').focus();
})  

As per my personal experience Adobe edge is the best tool for HTML5. It's still in preview mode but you will download it free from Adobe site.

SELECT TOP 14 A, B, C
  FROM MyDatabase
  Where EXISTS 
   (
     Select Distinct[A] FROM MyDatabase
    )

I faced same problem. Actually i face it often. Following three steps work for me always

1. Change DNS to 8.8.8.8 and 4.2.2.2
2. Open net.properties and change "# https.proxyPort=443" to "https.proxyPort=80". You can find net.properties here /Applications/Xcode.app/Contents/Applications/Application Loader.app/Contents/MacOS/itms/java/lib/net.properties
3. Open Application Loader->Preferences->Advanced and uncheck Signiant and Aspera. Make sure DAV is checked.

Thants all. Now you can submit app using both application loader and Xcode.

To post files as from byte arrays:

private static string UploadFilesToRemoteUrl(string url, IList<byte[]> files, NameValueCollection nvc) {

        string boundary = "----------------------------" + DateTime.Now.Ticks.ToString("x");

        var request = (HttpWebRequest) WebRequest.Create(url);
        request.ContentType = "multipart/form-data; boundary=" + boundary;
        request.Method = "POST";
        request.KeepAlive = true;
        var postQueue = new ByteArrayCustomQueue();

        var formdataTemplate = "\r\n--" + boundary + "\r\nContent-Disposition: form-data; name=\"{0}\";\r\n\r\n{1}";

        foreach (string key in nvc.Keys) {
            var formitem = string.Format(formdataTemplate, key, nvc[key]);
            var formitembytes = Encoding.UTF8.GetBytes(formitem);
            postQueue.Write(formitembytes);
        }

        var headerTemplate = "\r\n--" + boundary + "\r\n" +
            "Content-Disposition: form-data; name=\"{0}\"; filename=\"{1}\"\r\n" + 
            "Content-Type: application/zip\r\n\r\n";

        var i = 0;
        foreach (var file in files) {
            var header = string.Format(headerTemplate, "file" + i, "file" + i + ".zip");
            var headerbytes = Encoding.UTF8.GetBytes(header);
            postQueue.Write(headerbytes);
            postQueue.Write(file);
            i++;
        }

        postQueue.Write(Encoding.UTF8.GetBytes("\r\n--" + boundary + "--"));

        request.ContentLength = postQueue.Length;

        using (var requestStream = request.GetRequestStream()) {
            postQueue.CopyToStream(requestStream);
            requestStream.Close();
        }

        var webResponse2 = request.GetResponse();

        using (var stream2 = webResponse2.GetResponseStream())
        using (var reader2 = new StreamReader(stream2)) {

            var res =  reader2.ReadToEnd();
            webResponse2.Close();
            return res;
        }
    }

public class ByteArrayCustomQueue {

    private LinkedList<byte[]> arrays = new LinkedList<byte[]>();

    /// <summary>
    /// Writes the specified data.
    /// </summary>
    /// <param name="data">The data.</param>
    public void Write(byte[] data) {
        arrays.AddLast(data);
    }

    /// <summary>
    /// Gets the length.
    /// </summary>
    /// <value>
    /// The length.
    /// </value>
    public int Length { get { return arrays.Sum(x => x.Length); } }

    /// <summary>
    /// Copies to stream.
    /// </summary>
    /// <param name="requestStream">The request stream.</param>
    /// <exception cref="System.NotImplementedException"></exception>
    public void CopyToStream(Stream requestStream) {
        foreach (var array in arrays) {
            requestStream.Write(array, 0, array.Length);
        }
    }
}

For me this issue resolved by singing in Docker Desktop.

Set your PYTHONPATH environment variable. For example like this PYTHONPATH=.:.. (for *nix family).

Also you can manually add your current directory (src in your case) to pythonpath:

import os
import sys
sys.path.insert(0, os.getcwd())

Number theory textbooks call the divisor-counting function tau. The first interesting fact is that it's multiplicative, ie. t(ab) = t(a)t(b) , when a and b have no common factor. (Proof: each pair of divisors of a and b gives a distinct divisor of ab).

Now note that for p a prime, t(p**k) = k+1 (the powers of p). Thus you can easily compute t(n) from its factorisation.

However factorising large numbers can be slow (the security of RSA crytopraphy depends on the product of two large primes being hard to factorise). That suggests this optimised algorithm

1. Test if the number is prime (fast)
2. If so, return 2
3. Otherwise, factorise the number (slow if multiple large prime factors)
4. Compute t(n) from the factorisation

As Distdev alluded to, you still need to differentiate the input type. That is to say,

$(this).prev().prop('tagName');

will tell you input, but that doesn't differentiate between checkbox/text/radio. If it's an input, you can then use

$('#elementId').attr('type');

to tell you checkbox/text/radio, so you know what kind of control it is.

'-replace' does a regex search and you have special characters in that last one (like +) So you might use the non-regex replace version like this:

$c = $c.replace('AccountKey=eKkij32jGEIYIEqAR5RjkKgf4OTiMO6SAyF68HsR/Zd/KXoKvSdjlUiiWyVV2+OUFOrVsd7jrzhldJPmfBBpQA==','DdOegAhDmLdsou6Ms6nPtP37bdw6EcXucuT47lf9kfClA6PjGTe3CfN+WVBJNWzqcQpWtZf10tgFhKrnN48lXA==')

A simple link to the file is the obvious solution here. You just have to make shure that the link is valid and that it really points to a file ...

My controller

public function delete_category()   //Created a controller class //
    {      
         $this->load->model('Managecat'); //Load model Managecat here 
         $id=$this->input->get('id');     //  get the requested in a variable
         $sql_del=$this->Managecat->deleteRecord($id); //send the parameter $id in Managecat  there I have created a function name deleteRecord

         if($sql_del){

               $data['success'] = "Category Have been deleted Successfully!!";  //success message goes here 

         }

    }

My Model

public function deleteRecord($id) {

    $this->db->where('cat_id', $id);
    $del=$this->db->delete('category');   
    return $del;

}

If this is a function that you use all the time but always discard the second argument, I would argue that it is less messy to create an alias for the function without the second return value using lambda.

def func():
    return 1, 2

func_ = lambda: func()[0] 

func_()  # Prints 1 

Maybe you can try the following without XPath

from simplified_scrapy.simplified_doc import SimplifiedDoc 
html = '''
<html>
<body>
<div>
    <h1>Example Domain</h1>
    <p>This domain is for use in illustrative examples in documents. You may use this
    domain in literature without prior coordination or asking for permission.</p>
    <p><a href="https://www.iana.org/domains/example">More information...</a></p>
</div>
</body>
</html>
'''
# What XPath can do, so can it
doc = SimplifiedDoc(html)
# The result is the same as doc.getElementByTag('body').getElementByTag('div').getElementByTag('h1').text
print (doc.body.div.h1.text)
print (doc.div.h1.text)
print (doc.h1.text) # Shorter paths will be faster
print (doc.div.getChildren())
print (doc.div.getChildren('p'))

Do

apachectl -k graceful

Check this link for more information : http://www.electrictoolbox.com/article/apache/restart-apache/

bash$ sudo netstat -ltnp | grep -w ':3000'
 - tcp6    0      0 :::4000      :::*        LISTEN      31157/node      

bash$ kill 31157

One of the ways to use git diff is:

git diff <commit> <path>

And a common way to refer one commit of the last commit is as a relative path to the actual HEAD. You can reference previous commits as HEAD^ (in your example this will be 123abc) or HEAD^^ (456def in your example), etc ...

So the answer to your question is:

git diff HEAD^^ myfile

Using Perl:

perl -p -i -e 's/ /\t/g' file.txt

You have to do write in the same loop as read.

In xml:

<ImageView  
 android:clickable="true"  
 android:onClick="imageClick"  
 android:src="@drawable/myImage">  
 </ImageView>  

In code

 public class Test extends Activity {  
  ........  
  ........  
 public void imageClick(View view) {  
  //Implement image click function  
 }  

My solution for a local git server: go to your local git server hook directory, ignore the existing update.sample and create a new file literally named as "update", such as:

gituser@me:~/project.git/hooks$ pwd
/home/gituser/project.git/hooks
gituser@me:~/project.git/hooks$ cat update
#!/bin/sh
echo "XXX from  update file"
curl -u admin:11f778f9f2c4d1e237d60f479974e3dae9 -X POST http://localhost:8080/job/job4_pullsrc_buildcontainer/build?token=11f778f9f2c4d1e237d60f479974e3dae9

exit 0
gituser@me:~/project.git/hooks$ 

The echo statement will be displayed under your git push result, token can be taken from your jenkins job configuration, browse to find it. If the file "update" is not called, try some other files with the same name without extension "sample".

That's all you need

There is also someone who managed to modify CR for VS.NET 2010 to install on 2012, using MS ORCA in this thread: http://scn.sap.com/thread/3235515 . I couldn't get it to work myself, though.

try with below on powershell:

Set-ExecutionPolicy -ExecutionPolicy Unrestricted
import-module [\path\]XMLHelpers.psm1

Instead of [] put the full path

Full explanation of this and that

In Oracle, there is the concept of schema name, so try using this

update schemname.tablename t
set t.columnname = replace(t.columnname, t.oldvalue, t.newvalue);

You’re looking for urllib.parse.urlencode

import urllib.parse

params = {'username': 'administrator', 'password': 'xyz'}
encoded = urllib.parse.urlencode(params)
# Returns: 'username=administrator&password=xyz'

import com.google.common.base

if(!Strings.isNullOrEmpty(String str)) {
   // Do your stuff here 
}

Usage:

sftp("file:/C:/home/file.txt", "ssh://user:pass@host/home");
sftp("ssh://user:pass@host/home/file.txt", "file:/C:/home");

Implementation

If you need to do substitutions across line boundaries, then using ruby -pi -e won't work because the p processes one line at a time. Instead, I recommend the following, although it could fail with a multi-GB file:

ruby -e "file='translation.ja.yml'; IO.write(file, (IO.read(file).gsub(/\s+'$/, %q('))))"

The is looking for white space (potentially including new lines) following by a quote, in which case it gets rid of the whitespace. The %q(')is just a fancy way of quoting the quote character.

Building upon Vadian's answer, I wrote an extension that takes a Double (of which TimeInterval is a type alias) and spits out a string formatted as time.

extension Double {
  func asString(style: DateComponentsFormatter.UnitsStyle) -> String {
    let formatter = DateComponentsFormatter()
    formatter.allowedUnits = [.hour, .minute, .second, .nanosecond]
    formatter.unitsStyle = style
    guard let formattedString = formatter.string(from: self) else { return "" }
    return formattedString
  }
}

Here are what the various DateComponentsFormatter.UnitsStyle options look like:

10000.asString(style: .positional)  // 2:46:40
10000.asString(style: .abbreviated) // 2h 46m 40s
10000.asString(style: .short)       // 2 hr, 46 min, 40 sec
10000.asString(style: .full)        // 2 hours, 46 minutes, 40 seconds
10000.asString(style: .spellOut)    // two hours, forty-six minutes, forty seconds
10000.asString(style: .brief)       // 2hr 46min 40sec

To write it with a while loop you can do:

ls -f /var | while read -r file; do cmd $file; done

The primary disadvantage of this is that cmd is run in a subshell, which causes some difficulty if you are trying to set variables. The main advantages are that the shell does not need to load all of the filenames into memory, and there is no globbing. When you have a lot of files in the directory, those advantages are important (that's why I use -f on ls; in a large directory ls itself can take several tens of seconds to run and -f speeds that up appreciably. In such cases 'for file in /var/*' will likely fail with a glob error.)

I wrote a little jQuery extension for this:

$.fn.nl2brText = function (sText) {
    var bReturnValue = 'undefined' == typeof sText;
    if(bReturnValue) {
        sText = $('<pre>').html(this.html().replace(/<br[^>]*>/i, '\n')).text();
    }
    var aElms = [];
    sText.split(/\r\n|\r|\n/).forEach(function(sSubstring) {
        if(aElms.length) {
            aElms.push(document.createElement('br'));
        }
        aElms.push(document.createTextNode(sSubstring));
    });
    var $aElms = $(aElms);
    if(bReturnValue) {
        return $aElms;
    }
    return this.empty().append($aElms);
};

Eureka ! Finally I found a solution on this.

This is caused by Windows update that stops any 32-bit processes from consuming more than 1200 MB on a 64-bit machine. The only way you can repair this is by using the System Restore option on Win 7.

Start >> All Programs >> Accessories >> System Tools >> System Restore.

And then restore to a date on which your Java worked fine. This worked for me. What is surprising here is Windows still pushes system updates under the name of "Critical Updates" even when you disable all windows updates. ^&%)#* Windows :-)

If the directory ../.foo/bar/ doesn't exist, you can't create a file there, so make sure you create the directory first.

Try something like this:

File f = new File("somedirname1/somedirname2/somefilename");
if (!f.getParentFile().exists())
    f.getParentFile().mkdirs();
if (!f.exists())
    f.createNewFile();

You can pass a regular expression to the text parameter of findAll, like so:

import BeautifulSoup
import re

columns = soup.findAll('td', text = re.compile('your regex here'), attrs = {'class' : 'pos'})

From react-native --help

uninstall [options] uninstall and unlink native dependencies

Ex: react-native uninstall react-native-vector-icons

It will uninstall and unlink its dependencies.

All solutions here doesn't really bind the model to the input because you will have to change back the dateAsString to be saved as date in your object (in the controller after the form will be submitted).

If you don't need the binding effect, but just to show it in the input,

a simple could be:

<input type="date" value="{{ item.date | date: 'yyyy-MM-dd' }}" id="item_date" />

Then, if you like, in the controller, you can save the edited date in this way:

  $scope.item.date = new Date(document.getElementById('item_date').value).getTime();

be aware: in your controller, you have to declare your item variable as $scope.item in order for this to work.

{
    "success": true,
    "data": {
        "BLR": {
            "origin": "JAI",
            "destination": "BLR",
            "price": 127,
            "transfers": 0,
            "airline": "LB",
            "flight_number": 655,
            "departure_at": "2017-06-03T18:20:00Z",
            "return_at": "2017-06-07T08:30:00Z",
            "expires_at": "2017-03-05T08:40:31Z"
        }
    }
};

Check to make sure that both score and array[x] are numerical types. You might be comparing an integer to a string...which is heartbreakingly possible in Python 2.x.

>>> 2 < "2"
True
>>> 2 > "2"
False
>>> 2 == "2"
False

Edit

Further explanation: How does Python compare string and int?

Unfortunately, the best method to approach this is to use Internet Explorer as it's a browser that is guaranteed to be on Windows based machines. This will also bring compatibility of other users which might have alternative browsers such as Firefox, Chrome, Opera..etc,

start "iexplore.exe" http://www.website.com

You want to loop on the .Rows, and access the column for the row like q("column")

Just:

        For Each q In dtDataTable.Rows
            strDetail = q("Detail")
        Next

Also make sure to check msdn doc for any class you are using + use intellisense

-Wall and -Wextra sets the stage in GCC and the subsequent -Wno-unused-variable may not take effect. For example, if you have:

CFLAGS += -std=c99 -pedantic -pedantic-errors -Werror -g0 -Os \ -fno-strict-overflow -fno-strict-aliasing \ -Wall -Wextra \ -pthread \ -Wno-unused-label \ -Wno-unused-function \ -Wno-unused-parameter \ -Wno-unused-variable \ $(INC)

then GCC sees the instruction -Wall -Wextra and seems to ignore -Wno-unused-variable

This can instead look like this below and you get the desired effect of not being stopped in your compile on the unused variable:

CFLAGS += -std=c99 -pedantic -pedantic-errors -Werror -g0 -Os \ -fno-strict-overflow -fno-strict-aliasing \ -pthread \ -Wno-unused-label \ -Wno-unused-function \ $(INC)

There is a good reason it is called a "warning" vs an "error". Failing the compile just because you code is not complete (say you are stubbing the algorithm out) can be defeating.

If you have to process a variable that contains the complete path (ex.: thePath = "http://stackoverflow.com/directory/subdirectory/filename.jpg") and you want to return just "filename" you can use:

theName = thePath.split("/").slice(-1).join().split(".").shift();

the result will be theName == "filename";

To try it write the following command into the console window of your chrome debugger: window.location.pathname.split("/").slice(-1).join().split(".").shift()

If you have to process just the file name and its extension (ex.: theNameWithExt = "filename.jpg"):

theName = theNameWithExt.split(".").shift();

the result will be theName == "filename", the same as above;

Notes:

1. The first one is a little bit slower cause performes more operations; but works in both cases, in other words it can extract the file name without extension from a given string that contains a path or a file name with ex. While the second works only if the given variable contains a filename with ext like filename.ext but is a little bit quicker.
2. Both solutions work for both local and server files;

But I can't say nothing about neither performances comparison with other answers nor for browser or OS compatibility.

working snippet 1: the complete path

var thePath = "http://stackoverflow.com/directory/subdirectory/filename.jpg";_x000D_
theName = thePath.split("/").slice(-1).join().split(".").shift();_x000D_
alert(theName);

working snippet 2: the file name with extension

var theNameWithExt = "filename.jpg";_x000D_
theName = theNameWithExt.split("/").slice(-1).join().split(".").shift();_x000D_
alert(theName);

working snippet 2: the file name with double extension

var theNameWithExt = "filename.tar.gz";_x000D_
theName = theNameWithExt.split("/").slice(-1).join().split(".").shift();_x000D_
alert(theName);

You should put in WEB-INF any pages, or pieces of pages, that you do not want to be public. Usually, JSP or facelets are found outside WEB-INF, but in this case they are easily accesssible for any user. In case you have some authorization restrictions, WEB-INF can be used for that.

WEB-INF/lib can contain 3rd party libraries which you do not want to pack at system level (JARs can be available for all the applications running on your server), but only for this particular applciation.

Generally speaking, many configurations files also go into WEB-INF.

As for WEB-INF/classes - it exists in any web-app, because that is the folder where all the compiled sources are placed (not JARS, but compiled .java files that you wrote yourself).

Python >= 3.5 alternative: unpack into a list literal [*newdict]

New unpacking generalizations (PEP 448) were introduced with Python 3.5 allowing you to now easily do:

>>> newdict = {1:0, 2:0, 3:0}
>>> [*newdict]
[1, 2, 3]

Unpacking with * works with any object that is iterable and, since dictionaries return their keys when iterated through, you can easily create a list by using it within a list literal.

Adding .keys() i.e [*newdict.keys()] might help in making your intent a bit more explicit though it will cost you a function look-up and invocation. (which, in all honesty, isn't something you should really be worried about).

_{The *iterable syntax is similar to doing list(iterable) and its behaviour was initially documented in the Calls section of the Python Reference manual. With PEP 448 the restriction on where *iterable could appear was loosened allowing it to also be placed in list, set and tuple literals, the reference manual on Expression lists was also updated to state this.}

Though equivalent to list(newdict) with the difference that it's faster (at least for small dictionaries) because no function call is actually performed:

%timeit [*newdict]
1000000 loops, best of 3: 249 ns per loop

%timeit list(newdict)
1000000 loops, best of 3: 508 ns per loop

%timeit [k for k in newdict]
1000000 loops, best of 3: 574 ns per loop

with larger dictionaries the speed is pretty much the same (the overhead of iterating through a large collection trumps the small cost of a function call).

In a similar fashion, you can create tuples and sets of dictionary keys:

>>> *newdict,
(1, 2, 3)
>>> {*newdict}
{1, 2, 3}

beware of the trailing comma in the tuple case!

SELECT Convert(varchar(10),CONVERT(date,'columnname',105),105) as "end";

OR

SELECT CONVERT(VARCHAR(10), CAST(event_enddate AS DATE), 105) AS [end];

will return the particular date in the format of 'dd-mm-yyyy'

The result would be like this..

04-07-2016

There is simpler method.

Instead of using setTimeout or working with socket directly,
We can use 'timeout' in the 'options' in client uses

Below is code of both server and client, in 3 parts.

Module and options part:

'use strict';

// Source: https://github.com/nodejs/node/blob/master/test/parallel/test-http-client-timeout-option.js

const assert = require('assert');
const http = require('http');

const options = {
    host: '127.0.0.1', // server uses this
    port: 3000, // server uses this

    method: 'GET', // client uses this
    path: '/', // client uses this
    timeout: 2000 // client uses this, timesout in 2 seconds if server does not respond in time
};

Server part:

function startServer() {
    console.log('startServer');

    const server = http.createServer();
    server
            .listen(options.port, options.host, function () {
                console.log('Server listening on http://' + options.host + ':' + options.port);
                console.log('');

                // server is listening now
                // so, let's start the client

                startClient();
            });
}

Client part:

function startClient() {
    console.log('startClient');

    const req = http.request(options);

    req.on('close', function () {
        console.log("got closed!");
    });

    req.on('timeout', function () {
        console.log("timeout! " + (options.timeout / 1000) + " seconds expired");

        // Source: https://github.com/nodejs/node/blob/master/test/parallel/test-http-client-timeout-option.js#L27
        req.destroy();
    });

    req.on('error', function (e) {
        // Source: https://github.com/nodejs/node/blob/master/lib/_http_outgoing.js#L248
        if (req.connection.destroyed) {
            console.log("got error, req.destroy() was called!");
            return;
        }

        console.log("got error! ", e);
    });

    // Finish sending the request
    req.end();
}


startServer();

If you put all the above 3 parts in one file, "a.js", and then run:

node a.js

then, output will be:

startServer
Server listening on http://127.0.0.1:3000

startClient
timeout! 2 seconds expired
got closed!
got error, req.destroy() was called!

Hope that helps.

I would make the class final and every method would be static.

So the class cannot be extended and the methods can be called by Classname.methodName. If you add members, be sure that they work thread safe ;)

https://stackoverflow.com/a/53784508/5626747

Can't comment due to reputation, so I'm making another answer:

In this case you will also have to remove the generally suggested display: block; property from the element you set the text-overflow: ellipsis; on, or it will cut off without the ... at the end.

52e 1326 ERROR_LOGON_FAILURE Returns when username is valid but password/credential is invalid. Will prevent most other errors from being displayed as noted.

http://ldapwiki.com/wiki/Common%20Active%20Directory%20Bind%20Errors

While @tymeJV gave a correct answer, the way to do this to be inline with angular would be:

ng-click="hidePrefs()"

and then in your controller:

$scope.hidePrefs = function() {  
  $scope.prefs = false;
}

Edit the source (or turn off rich text) and replace the p tag with a div. Then style the div any which way you want.

ckEditor won't add any wrapper element on the next submit as you've got the div in there.

(This solved my issue, I'm using Drupal and need small snippets of html which the editor always added the extra, but the rest of the time I want the wrapping p tag).

I had this problem and the issue was that I had the package loaded in another R instance. Simply closing all R instances and installing on a fresh instance allowed for the package to be installed.

Generally, you can also install if every remaining instance has never loaded the package as well (even if it installed an old version).

The answer shared by @mockinterface is correct. Although I would like to add my 2 cents to it.

If someone is using frameworks like scrapy the you will have to use /html/body//a[contains(@href,'com')][2]/@href along with get() like this:

response.xpath('//a[contains(@href,'com')][2]/@href').get()

On Windows 2008 R2, I have seen application crash dumps under either

C:\Users\[Some User]\Microsoft\Windows\WER\ReportArchive

or

C:\ProgramData\Microsoft\Windows\WER\ReportArchive

I don't know how Windows decides which directory to use.

You've nearly got it:

DECLARE @myVariable nvarchar(max) = 'hello world';

See here for the docs

For the quotes, SQL Server uses apostrophes, not quotes:

DECLARE @myVariable nvarchar(max) = 'John said to Emily "Hey there Emily"';

Use double apostrophes if you need them in a string:

DECLARE @myVariable nvarchar(max) = 'John said to Emily ''Hey there Emily''';

To see of the curent time is greater or equal to 14:08:10 do this:

if (time() >= strtotime("14:08:10")) {
  echo "ok";
}

Depending on your input sources, make sure to account for timezone.

See PHP time() and PHP strtotime()

Its a CORS issue, your api cannot be accessed directly from remote or different origin, In order to allow other ip address or other origins from accessing you api, you should add the 'Access-Control-Allow-Origin' on the api's header, you can set its value to '*' if you want it to be accessible to all, or you can set specific domain or ips like 'http://siteA.com' or 'http://192. ip address ';

Include this on your api's header, it may vary depending on how you are displaying json data,

if your using ajax, to retrieve and display data your header would look like this,

$.ajax({
   url: '',
   headers: {  'Access-Control-Allow-Origin': 'http://The web site allowed to access' },
   data: data,
   type: 'dataType',
   /* etc */
   success: function(jsondata){

   }
})

=Sumifs(B:B,A:A,">=1/1/2013",A:A,"<=1/31/2013")

The beauty of this formula is you can add more data to columns A and B and it will just recalculate.

This is due to sometimes the session query may have invalid characters, try clicking on the highlighted icons in PHPMYADMIN, and it will be resolved, because session values resetted to defaults See Image

Try -Wno-traditional.

But better, add declarations for your static functions:

static void foo (void);

// ... somewhere in code
    foo ();

static void foo ()
{
    // do sth
}

Combining @nawfal & @Kobi suggestions:

namespace Extensions
{
    /// <summary> Useful in number of places that return an empty byte array to avoid unnecessary memory allocation. </summary>
    public static class Array<T>
    {
        public static readonly T[] Empty = new T[0];
    }
}

Usage example:

Array<string>.Empty

UPDATE 2019-05-14

(credits to @Jaider ty)

Better use .Net API:

public static T[] Empty<T> ();

https://docs.microsoft.com/en-us/dotnet/api/system.array.empty?view=netframework-4.8

Applies to:

.NET Core: 3.0 Preview 5 2.2 2.1 2.0 1.1 1.0

.NET Framework: 4.8 4.7.2 4.7.1 4.7 4.6.2 4.6.1 4.6

.NET Standard: 2.1 Preview 2.0 1.6 1.5 1.4 1.3

...

HTH

xml4jQuery plugin gives sleep(ms,callback) method. Remaining chain would be executed after sleep period.

$(".toFill").html("Click here")
                .$on('click')
                .html('Loading...')
                .sleep(1000)
                .html( 'done')
                .toggleClass('clickable')
                .prepend('Still clickable <hr/>');

.toFill{border: dashed 2px palegreen; border-radius: 1em; display: inline-block;padding: 1em;}
        .clickable{ cursor: pointer; border-color: blue;}

<script src="https://cdnjs.cloudflare.com/ajax/libs/jquery/3.3.1/jquery.min.js"></script>
   <script type="text/javascript" src="https://cdn.xml4jquery.com/ajax/libs/xml4jquery/1.1.2/xml4jquery.js"></script>
        <div class="toFill clickable"></div>

I use this simple function for JQuery based project

    var pointerEventToXY = function(e){
      var out = {x:0, y:0};
      if(e.type == 'touchstart' || e.type == 'touchmove' || e.type == 'touchend' || e.type == 'touchcancel'){
        var touch = e.originalEvent.touches[0] || e.originalEvent.changedTouches[0];
        out.x = touch.pageX;
        out.y = touch.pageY;
      } else if (e.type == 'mousedown' || e.type == 'mouseup' || e.type == 'mousemove' || e.type == 'mouseover'|| e.type=='mouseout' || e.type=='mouseenter' || e.type=='mouseleave') {
        out.x = e.pageX;
        out.y = e.pageY;
      }
      return out;
    };

example:

$('a').on('mousedown touchstart', function(e){
  console.log(pointerEventToXY(e)); // will return obj ..kind of {x:20,y:40}
})

hope this will be usefull for you ;)

Put an l (lowercased letter L) directly before the specifier.

unsigned long n;
long m;

printf("%lu %ld", n, m);

We can use pip freeze to get any Python package version without opening the Python shell.

pip freeze | grep 'numpy'

One gotcha which caught me out:

[repos:/path/to/dir/] # this won't work

but

[repos:/path/to/dir]  # this is right

You need to not include a trailing slash on the directory, or you'll see 403 for the OPTIONS request.

I don't know if you even need to wrap it. Won't this work?

SELECT COUNT(*), SUM(DATEDIFF(now(),availables.updated_at))
FROM availables
INNER JOIN rooms    ON availables.room_id=rooms.id
WHERE availables.bookdate BETWEEN '2009-06-25' 
  AND date_add('2009-06-25', INTERVAL 4 DAY)
  AND rooms.hostel_id = 5094
GROUP BY availables.bookdate);

If your goal is to return both result sets then you'll need to store it some place temporarily.

$.ajax({
    type: 'POST',    
    url:'http://nakolesah.ru/',
    data:'foo='+ bar+'&calibri='+ nolibri,
    success: function(msg){
        alert('wow' + msg);
    }
});

Your code is fine. There's no problem with returning Strings in this manner.

In Java, a String is a reference to an immutable object. This, coupled with garbage collection, takes care of much of the potential complexity: you can simply pass a String around without worrying that it would disapper on you, or that someone somewhere would modify it.

If you don't mind me making a couple of stylistic suggestions, I'd modify the code like so:

public String time_to_string(long t) // time in milliseconds
{
    if (t < 0)
    {
        return "-";
    }
    else
    {
        int secs = (int)(t/1000);
        int mins = secs/60;
        secs = secs - (mins * 60);
        return String.format("%d:%02d", mins, secs);
    }
}

As you can see, I've pushed the variable declarations as far down as I could (this is the preferred style in C++ and Java). I've also eliminated ans and have replaced the mix of string concatenation and String.format() with a single call to String.format().

This answer is pretty similar to Oz.'s, using <chrono> for C++ -- I didn't grab it from Oz. though...

I picked up the original snippet at the bottom of this page, and slightly modified it to be a complete console app. I love using this lil' ol' thing. It's fantastic if you do a lot of scripting and need a reliable tool in Windows to get the epoch in actual milliseconds without resorting to using VB, or some less modern, less reader-friendly code.

#include <chrono>
#include <iostream>

int main() {
    unsigned __int64 now = std::chrono::duration_cast<std::chrono::milliseconds>(std::chrono::system_clock::now().time_since_epoch()).count();
    std::cout << now << std::endl;
    return 0;
}

This works

    string str = "{ 'context_name': { 'lower_bound': 'value', 'pper_bound': 'value', 'values': [ 'value1', 'valueN' ] } }";
    JavaScriptSerializer j = new JavaScriptSerializer();
    object a = j.Deserialize(str, typeof(object));

In SQL Plus:

VAR rc REFCURSOR
EXEC gokul_proc(1,'GOKUL', :rc);
print rc

String.prototype.capitalize = function(allWords) {
   return (allWords) ? // If all words
      this.split(' ').map(word => word.capitalize()).join(' ') : // Break down the phrase to words and then recursive
                                                                 // calls until capitalizing all words
      this.charAt(0).toUpperCase() + this.slice(1); // If allWords is undefined, capitalize only the first word,
                                                    // meaning the first character of the whole string
}

And then:

 "capitalize just the first word".capitalize(); ==> "Capitalize just the first word"
 "capitalize all words".capitalize(true); ==> "Capitalize All Words"

Update November 2016 (ES6), just for fun:

const capitalize = (string = '') => [...string].map(    // Convert to array with each item is a char of
                                                        // string by using spread operator (...)
    (char, index) => index ? char : char.toUpperCase()  // Index true means not equal 0, so (!index) is
                                                        // the first character which is capitalized by
                                                        // the `toUpperCase()` method
 ).join('')                                             // Return back to string

then capitalize("hello") // Hello

Some tricks about redirection

Some syntax particularity about this may have important behaviours. There is some little samples about redirections, STDERR, STDOUT, and arguments ordering.

1 - Overwriting or appending?

Symbol > means redirection.

• > means send to as a whole completed file, overwriting target if exist (see noclobber bash feature at #3 later).
• >> means send in addition to would append to target if exist.

In any case, the file would be created if they not exist.

2 - The shell command line is order dependent!!

For testing this, we need a simple command which will send something on both outputs:

$ ls -ld /tmp /tnt
ls: cannot access /tnt: No such file or directory
drwxrwxrwt 118 root root 196608 Jan  7 11:49 /tmp

$ ls -ld /tmp /tnt >/dev/null
ls: cannot access /tnt: No such file or directory

$ ls -ld /tmp /tnt 2>/dev/null
drwxrwxrwt 118 root root 196608 Jan  7 11:49 /tmp

(Expecting you don't have a directory named /tnt, of course ;). Well, we have it!!

So, let's see:

$ ls -ld /tmp /tnt >/dev/null
ls: cannot access /tnt: No such file or directory

$ ls -ld /tmp /tnt >/dev/null 2>&1

$ ls -ld /tmp /tnt 2>&1 >/dev/null
ls: cannot access /tnt: No such file or directory

The last command line dumps STDERR to the console, and it seem not to be the expected behaviour... But...

If you want to make some post filtering about standard output, error output or both:

$ ls -ld /tmp /tnt | sed 's/^.*$/<-- & --->/'
ls: cannot access /tnt: No such file or directory
<-- drwxrwxrwt 118 root root 196608 Jan  7 12:02 /tmp --->

$ ls -ld /tmp /tnt 2>&1 | sed 's/^.*$/<-- & --->/'
<-- ls: cannot access /tnt: No such file or directory --->
<-- drwxrwxrwt 118 root root 196608 Jan  7 12:02 /tmp --->

$ ls -ld /tmp /tnt >/dev/null | sed 's/^.*$/<-- & --->/'
ls: cannot access /tnt: No such file or directory

$ ls -ld /tmp /tnt >/dev/null 2>&1 | sed 's/^.*$/<-- & --->/'

$ ls -ld /tmp /tnt 2>&1 >/dev/null | sed 's/^.*$/<-- & --->/'
<-- ls: cannot access /tnt: No such file or directory --->

Notice that the last command line in this paragraph is exactly same as in previous paragraph, where I wrote seem not to be the expected behaviour (so, this could even be an expected behaviour).

Well, there is a little tricks about redirections, for doing different operation on both outputs:

$ ( ls -ld /tmp /tnt | sed 's/^/O: /' >&9 ) 9>&2  2>&1  | sed 's/^/E: /'
O: drwxrwxrwt 118 root root 196608 Jan  7 12:13 /tmp
E: ls: cannot access /tnt: No such file or directory

Note: &9 descriptor would occur spontaneously because of ) 9>&2.

Addendum: nota! With the new version of bash (>4.0) there is a new feature and more sexy syntax for doing this kind of things:

$ ls -ld /tmp /tnt 2> >(sed 's/^/E: /') > >(sed 's/^/O: /')
O: drwxrwxrwt 17 root root 28672 Nov  5 23:00 /tmp
E: ls: cannot access /tnt: No such file or directory

And finally for such a cascading output formatting:

$ ((ls -ld /tmp /tnt |sed 's/^/O: /' >&9 ) 2>&1 |sed 's/^/E: /') 9>&1| cat -n
     1  O: drwxrwxrwt 118 root root 196608 Jan  7 12:29 /tmp
     2  E: ls: cannot access /tnt: No such file or directory

Addendum: nota! Same new syntax, in both ways:

$ cat -n <(ls -ld /tmp /tnt 2> >(sed 's/^/E: /') > >(sed 's/^/O: /'))
     1  O: drwxrwxrwt 17 root root 28672 Nov  5 23:00 /tmp
     2  E: ls: cannot access /tnt: No such file or directory

Where STDOUT go through a specific filter, STDERR to another and finally both outputs merged go through a third command filter.

3 - A word about noclobber option and >| syntax

That's about overwriting:

While set -o noclobber instruct bash to not overwrite any existing file, the >| syntax let you pass through this limitation:

$ testfile=$(mktemp /tmp/testNoClobberDate-XXXXXX)

$ date > $testfile ; cat $testfile
Mon Jan  7 13:18:15 CET 2013

$ date > $testfile ; cat $testfile
Mon Jan  7 13:18:19 CET 2013

$ date > $testfile ; cat $testfile
Mon Jan  7 13:18:21 CET 2013

The file is overwritten each time, well now:

$ set -o noclobber

$ date > $testfile ; cat $testfile
bash: /tmp/testNoClobberDate-WW1xi9: cannot overwrite existing file
Mon Jan  7 13:18:21 CET 2013

$ date > $testfile ; cat $testfile
bash: /tmp/testNoClobberDate-WW1xi9: cannot overwrite existing file
Mon Jan  7 13:18:21 CET 2013

Pass through with >|:

$ date >| $testfile ; cat $testfile
Mon Jan  7 13:18:58 CET 2013

$ date >| $testfile ; cat $testfile
Mon Jan  7 13:19:01 CET 2013

Unsetting this option and/or inquiring if already set.

$ set -o | grep noclobber
noclobber           on

$ set +o noclobber

$ set -o | grep noclobber
noclobber           off

$ date > $testfile ; cat $testfile
Mon Jan  7 13:24:27 CET 2013

$ rm $testfile

4 - Last trick and more...

For redirecting both output from a given command, we see that a right syntax could be:

$ ls -ld /tmp /tnt >/dev/null 2>&1

for this special case, there is a shortcut syntax: &> ... or >&

$ ls -ld /tmp /tnt &>/dev/null

$ ls -ld /tmp /tnt >&/dev/null

Nota: if 2>&1 exist, 1>&2 is a correct syntax too:

$ ls -ld /tmp /tnt 2>/dev/null 1>&2

4b- Now, I will let you think about:

$ ls -ld /tmp /tnt 2>&1 1>&2  | sed -e s/^/++/
++/bin/ls: cannot access /tnt: No such file or directory
++drwxrwxrwt 193 root root 196608 Feb  9 11:08 /tmp/

$ ls -ld /tmp /tnt 1>&2 2>&1  | sed -e s/^/++/
/bin/ls: cannot access /tnt: No such file or directory
drwxrwxrwt 193 root root 196608 Feb  9 11:08 /tmp/

4c- If you're interested in more information

You could read the fine manual by hitting:

man -Len -Pless\ +/^REDIRECTION bash

in a bash console ;-)

You can switch the data type to an integer:

>>> n = 5.59
>>> int(n * 10) / 10.0
5.5
>>> int(n * 10 + 0.5)
56

And then display the number by inserting the locale's decimal separator.

However, Jimmy's answer is better.

You need to find the bin folder and then open a command prompt on that folder Then just type mongo.exe and press enter to start the shell

Or you can supply the full path to mongo.exe from any folder to start the shell:

c:\MongoDB\bin\mongo.exe

Then if you have multiple databases, you can do enter command >use <database_name> to use that db

Let me know if it helps or have issues

I had the exact same problem. The solution is simple. Just change the "name" parameter passed to the DropDownList helper to something that does not match any of the properties existing in your ViewModel. read more here: http://www.dotnetguy.co.uk/post/2009/06/25/net-mvc-selectlists-selected-value-does-not-get-set-in-the-view

I quote the Dan Watson:

In MVC if the view is strongly typed the selectlist’s selected option will be overridden and the selected option property set on the constructor will never reach the view and the first option in the dropdown will be selected instead (why is still a bit of a mystery).

cheers!