Programs & Examples On #Partial ordering

armhf stands for "arm hard float", and is the name given to a debian port for arm processors (armv7+) that have hardware floating point support.

On the beaglebone black, for example:

:~$ dpkg --print-architecture
armhf

Although other commands (such as uname -a or arch) will just show armv7l

:~$ cat /proc/cpuinfo 
processor       : 0
model name      : ARMv7 Processor rev 2 (v7l)
BogoMIPS        : 995.32
Features        : half thumb fastmult vfp edsp thumbee neon vfpv3 tls
...

The vfpv3 listed under Features is what refers to the floating point support.

Incidentally, armhf, if your processor supports it, basically supersedes Raspbian, which if I understand correctly was mainly a rebuild of armhf with work arounds to deal with the lack of floating point support on the original raspberry pi's. Nowdays, of course, there's a whole ecosystem build up around Raspbian, so they're probably not going to abandon it. However, this is partly why the beaglebone runs straight debian, and that's ok even if you're used to Raspbian, unless you want some of the special included non-free software such as Mathematica.

Always use double quotes when using a variable inside a string and backslash any other double quotes except the starting and ending ones. You could also use the brackets like below so it's easier to find your variables inside the strings and make them look cleaner.

$var = 'my variable';
echo "I love ${var}";

or

$var = 'my variable';
echo "I love {$var}";

Above would return the following: I love my variable

EDIT:

It looks like the issue is now solved using an external command called brew rmdeps or brew rmtree.

To install and use, issue the following commands:

$ brew tap beeftornado/rmtree
$ brew rmtree <package>

See the above link for more information and discussion.

Original answer:

It appears that currently, there's no easy way to accomplish this.

However, I filed an issue on Homebrew's GitHub page, and somebody suggested a temporary solution until they add an exclusive command to solve this.

There's an external command called brew leaves which prints all packages that are not dependencies of other packages.

If you do a logical and on the output of brew leaves and brew deps <package>, you might just get a list of the orphaned dependency packages, which you can uninstall manually afterwards. Combine this with xargs and you'll get what you need, I guess (untested, don't count on this).

EDIT: Somebody just suggested a very similar solution, using join instead of xargs:

brew rm FORMULA
brew rm $(join <(brew leaves) <(brew deps FORMULA))

See the comment on the issue mentioned above for more info.

You can try following code snippet.

function addScript(attribute, text, callback) {
    var s = document.createElement('script');
    for (var attr in attribute) {
        s.setAttribute(attr, attribute[attr] ? attribute[attr] : null)
    }
    s.innerHTML = text;
    s.onload = callback;
    document.body.appendChild(s);
}

addScript({
    src: 'https://www.google.com',
    type: 'text/javascript',
    async: null
}, '<div>innerHTML</div>', function(){});

You can just do this:

const char *text = "This is my string it is "
     "very long";

UIAlertView *alert = [[UIAlertView alloc]
 initWithTitle:@"Title" 
 message:@"Message" 
 delegate:nil //or self
 cancelButtonTitle:@"OK"
 otherButtonTitles:nil];

 [alert show];
 [alert autorelease];

The post needs an update after the links option is deprecated.

Basically, links is no longer needed because its main purpose, making container reachable by another by adding environment variable, is included implicitly with network. When containers are placed in the same network, they are reachable by each other using their container name and other alias as host.

For docker run, --link is also deprecated and should be replaced by a custom network.

docker network create mynet
docker run -d --net mynet --name container1 my_image
docker run -it --net mynet --name container1 another_image

depends_on expresses start order (and implicitly image pulling order), which was a good side effect of links.

Need to add package

sudo apt-get install libpq-dev

to install pg gem in RoR

Use nargs='?' (or nargs='*' if you need more than one dir)

parser.add_argument('dir', nargs='?', default=os.getcwd())

extended example:

>>> import os, argparse
>>> parser = argparse.ArgumentParser()
>>> parser.add_argument('-v', action='store_true')
_StoreTrueAction(option_strings=['-v'], dest='v', nargs=0, const=True, default=False, type=None, choices=None, help=None, metavar=None)
>>> parser.add_argument('dir', nargs='?', default=os.getcwd())
_StoreAction(option_strings=[], dest='dir', nargs='?', const=None, default='/home/vinay', type=None, choices=None, help=None, metavar=None)
>>> parser.parse_args('somedir -v'.split())
Namespace(dir='somedir', v=True)
>>> parser.parse_args('-v'.split())
Namespace(dir='/home/vinay', v=True)
>>> parser.parse_args(''.split())
Namespace(dir='/home/vinay', v=False)
>>> parser.parse_args(['somedir'])
Namespace(dir='somedir', v=False)
>>> parser.parse_args('somedir -h -v'.split())
usage: [-h] [-v] [dir]

positional arguments:
  dir

optional arguments:
  -h, --help  show this help message and exit
  -v

If you code for iOS 13.0 or later and want a timestamp, then you can use:

let currentDate = NSDate.now

How about this?

INSERT OR IGNORE INTO EVENTTYPE (EventTypeName) VALUES 'ANI Received'

(Untested as I don't have SQLite... however this link is quite descriptive.)

Additionally, this should also work:

INSERT INTO EVENTTYPE (EventTypeName)
SELECT 'ANI Received'
WHERE NOT EXISTS (SELECT 1 FROM EVENTTYPE WHERE EventTypeName = 'ANI Received');

think of FINAL as the "End of the line" - that guy cannot produce offspring anymore. So when you see it this way, there are ton of real world scenarios that you will come across that requires you to flag an 'end of line' marker to the class. It is Domain Driven Design - if your domain demands that a given ENTITY (class) cannot create sub-classes, then mark it as FINAL.

I should note that there is nothing stopping you from inheriting a "should be tagged as final" class. But that is generally classified as "abuse of inheritance", and done because most often you would like to inherit some function from the base class in your class.

The best approach is to look at the domain and let it dictate your design decisions.

<script> is HTML 5.

<script type='text/javascript'> is HTML 4.x (and XHTML 1.x).

<script language="javascript"> is HTML 3.2.

Is it different for different webservers?

No.

when I did an offline javascript test, i realised that i need the <script type = 'text/javascript'> tag.

That isn't the case. Something else must have been wrong with your test case.

Login to virtual machine use below command to check ip address. (anyone will work)

1. ifconfig
2. ip addr show

If you used NAT for your virtual machine settings(your machine ip will be 10.0.2.15), then you have to use port forwarding to connect to machine. IP address will be 127.0.0.1

If you used bridged networking/Host only networking, then you will have separate Ip address. Use that IP address to connect virtual machine

The zoom property sounds as though it's perfect for Adam Ernst as it suits his target device. However, for those who need a solution to this and have to support as many devices as possible you can do the following:

<img src="..." onload="this.width/=2;this.onload=null;" />

The reason for the this.onload=null addition is to avoid older browsers that sometimes trigger the load event twice (which means you can end up with quater-sized images). If you aren't worried about that though you could write:

<img src="..." onload="this.width/=2;" />

Which is quite succinct.

Try this:

for /F "tokens=1,3 delims=. " %%a in ("%string%") do (
   echo %%a
   echo %%b
)

that is, take the first and third tokens delimited by space or point...

<Snippet name="abc"> 

name is an attribute, not an element. That's why it's failing. Look into using SetAttribute on the <Snippet> element.

root.SetAttribute("name", "name goes here");

is the code you need with what you have.

I think may be more automatic, grunt task usemin take care to do all this jobs for you, only need some configuration:

https://stackoverflow.com/a/33481683/1897196

It can be done easily by the following

Calendar calendar = Calendar.getInstance();
        // from current time
        long curTimeInMills = new Date().getTime();
        long timeInMills = curTimeInMills - 5 * (24*60*60*1000);    // `enter code here`subtract like 5 days
        calendar.setTimeInMillis(timeInMills);
        System.out.println(calendar.getTime());

        // from specific time like (08 05 2015)
        calendar.set(Calendar.DAY_OF_MONTH, 8);
        calendar.set(Calendar.MONTH, (5-1));
        calendar.set(Calendar.YEAR, 2015);
        timeInMills = calendar.getTimeInMillis() - 5 * (24*60*60*1000);
        calendar.setTimeInMillis(timeInMills);
        System.out.println(calendar.getTime());

Changing the policy to Unrestricted worked for me:

Set-ExecutionPolicy Unrestricted -Scope CurrentUser

Similar implementation to Ahmad Sirojuddin but slightly different semantics. From a security perspective, any time a function writes into a string buffer, the function should really "know" the size of the buffer and refuse to write past the end of it. I would guess its a part of the reason you can't find itoa anymore.

Also, the following implementation avoids performing the module/devide operation twice.

char *u32todec( uint32_t    value,
                char        *buf,
                int         size)
{
    if(size > 1){
        int i=size-1, offset, bytes;
        buf[i--]='\0';
        do{
            buf[i--]=(value % 10)+'0';
            value = value/10;
        }while((value > 0) && (i>=0));
        offset=i+1;
        if(offset > 0){
            bytes=size-i-1;
            for(i=0;i<bytes;i++)
                buf[i]=buf[i+offset];
        }
        return buf;
    }else
        return NULL;
}

The following code both tests the above code and demonstrates its correctness:

int main(void)
{
    uint64_t acc;
    uint32_t inc;
    char buf[16];
    size_t bufsize;
    for(acc=0, inc=7; acc<0x100000000; acc+=inc){
        printf("%u: ", (uint32_t)acc);
        for(bufsize=17; bufsize>0; bufsize/=2){
            if(NULL != u32todec((uint32_t)acc, buf, bufsize))
                printf("%s ", buf);
        }
        printf("\n");
        if(acc/inc > 9)
            inc*=7;
    }
    return 0;
}

Based on the Worker objects methods mentioned in other answers, I decided to see if I could expand on the solution to invoke more threads - in this case the optimal number the machine can run and spin up multiple workers with indeterminate completion times. To do this I still need to subclass QThread - but only to assign a thread number and to 'reimplement' the signals 'finished' and 'started' to include their thread number.

I've focused quite a bit on the signals between the main gui, the threads, and the workers.

Similarly, others answers have been a pains to point out not parenting the QThread but I don't think this is a real concern. However, my code also is careful to destroy the QThread objects.

However, I wasn't able to parent the worker objects so it seems desirable to send them the deleteLater() signal, either when the thread function is finished or the GUI is destroyed. I've had my own code hang for not doing this.

Another enhancement I felt was necessary was was reimplement the closeEvent of the GUI (QWidget) such that the threads would be instructed to quit and then the GUI would wait until all the threads were finished. When I played with some of the other answers to this question, I got QThread destroyed errors.

Perhaps it will be useful to others. I certainly found it a useful exercise. Perhaps others will know a better way for a thread to announce it identity.

#!/usr/bin/env python3
#coding:utf-8
# Author:   --<>
# Purpose:  To demonstrate creation of multiple threads and identify the receipt of thread results
# Created: 19/12/15

import sys


from PyQt4.QtCore import QThread, pyqtSlot, pyqtSignal
from PyQt4.QtGui import QApplication, QLabel, QWidget, QGridLayout

import sys
import worker

class Thread(QThread):
    #make new signals to be able to return an id for the thread
    startedx = pyqtSignal(int)
    finishedx = pyqtSignal(int)

    def __init__(self,i,parent=None):
        super().__init__(parent)
        self.idd = i

        self.started.connect(self.starttt)
        self.finished.connect(self.finisheddd)

    @pyqtSlot()
    def starttt(self):
        print('started signal from thread emitted')
        self.startedx.emit(self.idd) 

    @pyqtSlot()
    def finisheddd(self):
        print('finished signal from thread emitted')
        self.finishedx.emit(self.idd)

class Form(QWidget):

    def __init__(self):
        super().__init__()

        self.initUI()

        self.worker={}
        self.threadx={}
        self.i=0
        i=0

        #Establish the maximum number of threads the machine can optimally handle
        #Generally relates to the number of processors

        self.threadtest = QThread(self)
        self.idealthreadcount = self.threadtest.idealThreadCount()

        print("This machine can handle {} threads optimally".format(self.idealthreadcount))

        while i <self.idealthreadcount:
            self.setupThread(i)
            i+=1

        i=0
        while i<self.idealthreadcount:
            self.startThread(i)
            i+=1

        print("Main Gui running in thread {}.".format(self.thread()))


    def setupThread(self,i):

        self.worker[i]= worker.Worker(i)  # no parent!
        #print("Worker object runningt in thread {} prior to movetothread".format(self.worker[i].thread()) )
        self.threadx[i] = Thread(i,parent=self)  #  if parent isn't specified then need to be careful to destroy thread 
        self.threadx[i].setObjectName("python thread{}"+str(i))
        #print("Thread object runningt in thread {} prior to movetothread".format(self.threadx[i].thread()) )
        self.threadx[i].startedx.connect(self.threadStarted)
        self.threadx[i].finishedx.connect(self.threadFinished)

        self.worker[i].finished.connect(self.workerFinished)
        self.worker[i].intReady.connect(self.workerResultReady)

        #The next line is optional, you may want to start the threads again without having to create all the code again.
        self.worker[i].finished.connect(self.threadx[i].quit)

        self.threadx[i].started.connect(self.worker[i].procCounter)

        self.destroyed.connect(self.threadx[i].deleteLater)
        self.destroyed.connect(self.worker[i].deleteLater)

        #This is the key code that actually get the worker code onto another processor or thread.
        self.worker[i].moveToThread(self.threadx[i])

    def startThread(self,i):
        self.threadx[i].start()

    @pyqtSlot(int)
    def threadStarted(self,i):
        print('Thread {}  started'.format(i))
        print("Thread priority is {}".format(self.threadx[i].priority()))        


    @pyqtSlot(int)
    def threadFinished(self,i):
        print('Thread {} finished'.format(i))




    @pyqtSlot(int)
    def threadTerminated(self,i):
        print("Thread {} terminated".format(i))

    @pyqtSlot(int,int)
    def workerResultReady(self,j,i):
        print('Worker {} result returned'.format(i))
        if i ==0:
            self.label1.setText("{}".format(j))
        if i ==1:
            self.label2.setText("{}".format(j))
        if i ==2:
            self.label3.setText("{}".format(j))
        if i ==3:
            self.label4.setText("{}".format(j)) 

        #print('Thread {} has started'.format(self.threadx[i].currentThreadId()))    

    @pyqtSlot(int)
    def workerFinished(self,i):
        print('Worker {} finished'.format(i))

    def initUI(self):
        self.label1 = QLabel("0")
        self.label2= QLabel("0")
        self.label3= QLabel("0")
        self.label4 = QLabel("0")
        grid = QGridLayout(self)
        self.setLayout(grid)
        grid.addWidget(self.label1,0,0)
        grid.addWidget(self.label2,0,1) 
        grid.addWidget(self.label3,0,2) 
        grid.addWidget(self.label4,0,3) #Layout parents the self.labels

        self.move(300, 150)
        self.setGeometry(0,0,300,300)
        #self.size(300,300)
        self.setWindowTitle('thread test')
        self.show()

    def closeEvent(self, event):
        print('Closing')

        #this tells the threads to stop running
        i=0
        while i <self.idealthreadcount:
            self.threadx[i].quit()
            i+=1

         #this ensures window cannot be closed until the threads have finished.
        i=0
        while i <self.idealthreadcount:
            self.threadx[i].wait() 
            i+=1        


        event.accept()


if __name__=='__main__':
    app = QApplication(sys.argv)
    form = Form()
    sys.exit(app.exec_())

And the worker code below

#!/usr/bin/env python3
#coding:utf-8
# Author:   --<>
# Purpose:  Stack Overflow
# Created: 19/12/15

import sys
import unittest


from PyQt4.QtCore import QThread, QObject, pyqtSignal, pyqtSlot
import time
import random


class Worker(QObject):
    finished = pyqtSignal(int)
    intReady = pyqtSignal(int,int)

    def __init__(self, i=0):
        '''__init__ is called while the worker is still in the Gui thread. Do not put slow or CPU intensive code in the __init__ method'''

        super().__init__()
        self.idd = i



    @pyqtSlot()
    def procCounter(self): # This slot takes no params
        for j in range(1, 10):
            random_time = random.weibullvariate(1,2)
            time.sleep(random_time)
            self.intReady.emit(j,self.idd)
            print('Worker {0} in thread {1}'.format(self.idd, self.thread().idd))

        self.finished.emit(self.idd)


if __name__=='__main__':
    unittest.main()

You're missing the actual pipe.

{{ myData | date:'fullDate' }}

Multiple parameters can be separated by a colon (:).

{{ myData | myPipe:'arg1':'arg2':'arg3' }}

Also you can chain pipes, like so:

{{ myData | date:'fullDate' | myPipe:'arg1':'arg2':'arg3' }}

<input type="text" autocomplete="off"/>

Should work. Alternatively, use:

<form autocomplete="off" … >

for the entire form (see this related question).

//You can do it with json.MarshalIndent(data, "", "  ")

package main

import(
  "fmt"
  "encoding/json" //Import package
)

//Create struct
type Users struct {
    ID   int
    NAME string
}

//Asign struct
var user []Users
func main() {
 //Append data to variable user
 user = append(user, Users{1, "Saturn Rings"})
 //Use json package the blank spaces are for the indent
 data, _ := json.MarshalIndent(user, "", "  ")
 //Print json formatted
 fmt.Println(string(data))
}

You forgot the return types in your member function definitions:

int ttTree::ttTreeInsert(int value) { ... }
^^^               

and so on.

From http://php.net/manual/en/function.serialize.php :

Generates a storable representation of a value. This is useful for storing or passing PHP values around without losing their type and structure.

Essentially, it takes a php array or object and converts it to a string (which you can then transmit or store as you see fit).

Unserialize is used to convert the string back to an object.

Yes, it's true. Why do you doubt the php faq on the function? :)

The result of running password_hash() has has four parts:

1. the algorithm used
2. parameters
3. salt
4. actual password hash

So as you can see, the hash is a part of it.

Sure, you could have an additional salt for an added layer of security, but I honestly think that's overkill in a regular php application. The default bcrypt algorithm is good, and the optional blowfish one is arguably even better.

To answer the question How to delete specific columns in vba for excel. I use Array as below.

sub del_col()

dim myarray as variant
dim i as integer

myarray = Array(10, 9, 8)'Descending to Ascending
For i = LBound(myarray) To UBound(myarray)
    ActiveSheet.Columns(myarray(i)).EntireColumn.Delete
Next i

end sub

Bit of a tweak to Jocker's response (I would post as a comment, but I don't have enough karma yet):

SELECT TABLE_NAME, ENGINE
  FROM information_schema.TABLES
 WHERE TABLE_SCHEMA = 'database' AND ENGINE IS NOT NULL;

This excludes MySQL views from the list, which don't have an engine.

Font.PLAIN is not an enum. It is just an int. If you need to take the value out of an enum, you can't avoid calling a method or using a .value, because enums are actually objects of its own type, not primitives.

If you truly only need an int, and you are already to accept that type-safety is lost the user may pass invalid values to your API, you may define those constants as int also:

public final class DownloadType {
    public static final int AUDIO = 0;
    public static final int VIDEO = 1;
    public static final int AUDIO_AND_VIDEO = 2;

    // If you have only static members and want to simulate a static
    // class in Java, then you can make the constructor private.
    private DownloadType() {}
}

By the way, the value field is actually redundant because there is also an .ordinal() method, so you could define the enum as:

enum DownloadType { AUDIO, VIDEO, AUDIO_AND_VIDEO }

and get the "value" using

DownloadType.AUDIO_AND_VIDEO.ordinal()

Edit: Corrected the code.. static class is not allowed in Java. See this SO answer with explanation and details on how to define static classes in Java.

i think this should do it

if isinstance(obj, str)

The solution is:

Update-Database –TargetMigration 201609261919239_yourLastMigrationSucess

Please check you pom.xml for the below tags

<properties>
    <maven.compiler.source>1.7</maven.compiler.source>
    <maven.compiler.target>1.7</maven.compiler.target>
</properties>

it should point the required jdk version

If you are already using Apache Commons Lang, the RandomUtils makes this a one-liner:

byte[] randomBytes = RandomUtils.nextBytes(20);

Note: this does not produce cryptographically-secure bytes.

Get it inside controller as an object via call Get<YourType>():

public IActionResult Index([FromServices] IConfiguration config)
{
    BillModel model = config.GetSection("Yst.Requisites").Get<BillModel>();
    return View(model);
}

You can put the control you want to center inside a Panel and set the left and right padding values to something larger than the default. As long as they are equal and your control is anchored to the sides of the Panel, then it will appear centered in that Panel. Then you can anchor the container Panel to its parent as needed.

Try This:

let categories = dictData?.value(forKeyPath: "listing_subcategories_id") as! NSMutableArray
                        let tempArray = NSMutableArray()
                        for dc in categories
                        {
                            let dictD = dc as? NSMutableDictionary
                            tempArray.add(dictD?.object(forKey: "subcategories_name") as! String)
                        }
                        let joinedString = tempArray.componentsJoined(by: ",")

From Spring Boot Reference Guide

Installation as an init.d service (System V)

Simply symlink the jar to init.d to support the standard start, stop, restart and status commands. Assuming that you have a Spring Boot application installed in /var/myapp, to install a Spring Boot application as an init.d service simply create a symlink:

$ sudo ln -s /var/myapp/myapp.jar /etc/init.d/myapp

Once installed, you can start and stop the service in the usual way. For example, on a Debian based system:

$ service myapp start

If your application fails to start, check the log file written to /var/log/<appname>.log for errors.

Continue reading to know how to secure a deployed service.

After doing as written I've discovered that my service fails to start with this error message in logs: start-stop-daemon: unrecognized option --no-close. And I've managed to fix it by creating a config file /var/myapp/myapp.conf with the following content

USE_START_STOP_DAEMON=false

Do this to see the key you're using; ssh -vT [email protected]

Then make sure in your build you have this run at the start. eval "$(ssh-agent -s)" ssh-add ~/.ssh/id_rsa

Try the following code :

$config['base_url'] = ((isset($_SERVER['HTTPS']) && $_SERVER['HTTPS'] == "on") ? "https" : "http");
$config['base_url'] .= "://".$_SERVER['HTTP_HOST'];
$config['base_url'] .= str_replace(basename($_SERVER['SCRIPT_NAME']),"",$_SERVER['SCRIPT_NAME']);
echo $config['base_url'];

There is no default value to control deleting old log files created by DailyRollingFileAppender. But you can write your own custom Appender that deletes old log files in much the same way as setting maxBackupIndex does for RollingFileAppender.

Simple instructions found here

From 1:

If you are trying to use the Apache Log4J DailyRollingFileAppender for a daily log file, you may need to want to specify the maximum number of files which should be kept. Just like rolling RollingFileAppender supports maxBackupIndex. But the current version of Log4j (Apache log4j 1.2.16) does not provide any mechanism to delete old log files if you are using DailyRollingFileAppender. I tried to make small modifications in the original version of DailyRollingFileAppender to add maxBackupIndex property. So, it would be possible to clean up old log files which may not be required for future usage.

I have kind of similar condition plus my Search Query not limited to particular Object property ( like "John" Search query should be matched with first_name and also with last_name property ). After spending some hours I got this function from Google's Angular project. They have taken care of every possible cases.

/* Seach in Object */

var comparator = function(obj, text) {
if (obj && text && typeof obj === 'object' && typeof text === 'object') {
    for (var objKey in obj) {
        if (objKey.charAt(0) !== '$' && hasOwnProperty.call(obj, objKey) &&
                comparator(obj[objKey], text[objKey])) {
            return true;
        }
    }
    return false;
}
text = ('' + text).toLowerCase();
return ('' + obj).toLowerCase().indexOf(text) > -1;
};

var search = function(obj, text) {
if (typeof text == 'string' && text.charAt(0) === '!') {
    return !search(obj, text.substr(1));
}
switch (typeof obj) {
    case "boolean":
    case "number":
    case "string":
        return comparator(obj, text);
    case "object":
        switch (typeof text) {
            case "object":
                return comparator(obj, text);
            default:
                for (var objKey in obj) {
                    if (objKey.charAt(0) !== '$' && search(obj[objKey], text)) {
                        return true;
                    }
                }
                break;
        }
        return false;
    case "array":
        for (var i = 0; i < obj.length; i++) {
            if (search(obj[i], text)) {
                return true;
            }
        }
        return false;
    default:
        return false;
}
};

I'm still getting spotty results in 2017, and I have a theory: the API documentation says that the call is now only available "in a secure context", i.e. over HTTPS. I'm having trouble getting a result in my development environment (http on localhost) and I believe this is why.

Instance variable is the variable declared inside a class, but outside a method: something like:

class IronMan {

    /** These are all instance variables **/
    public String realName;
    public String[] superPowers;
    public int age;

    /** Getters and setters here **/
}

Now this IronMan Class can be instantiated in another class to use these variables. Something like:

class Avengers {

    public static void main(String[] a) {
        IronMan ironman = new IronMan();
        ironman.realName = "Tony Stark";
        // or
        ironman.setAge(30);
    }

}

This is how we use the instance variables. Shameless plug: This example was pulled from this free e-book here here.

<td><input type="radio" name="gender" value="Male" id="male" <? if($gender=='Male')
{?> checked="" <? }?>/>Male
<input type="radio" name="gender" value="Female" id="female" <? if($gender=='Female') {?> checked="" <?}?>/>Female<br/> </td>

The short answer is "no, it is not possible to do that in a principled way that works even remotely well". It is an unsolved problem in natural language processing research and also happens to be the subject of my doctoral work. I'll very briefly summarize where we are and point you to a few publications:

Meaning of words

The most important assumption here is that it is possible to obtain a vector that represents each word in the sentence in quesion. This vector is usually chosen to capture the contexts the word can appear in. For example, if we only consider the three contexts "eat", "red" and "fluffy", the word "cat" might be represented as [98, 1, 87], because if you were to read a very very long piece of text (a few billion words is not uncommon by today's standard), the word "cat" would appear very often in the context of "fluffy" and "eat", but not that often in the context of "red". In the same way, "dog" might be represented as [87,2,34] and "umbrella" might be [1,13,0]. Imagening these vectors as points in 3D space, "cat" is clearly closer to "dog" than it is to "umbrella", therefore "cat" also means something more similar to "dog" than to an "umbrella".

This line of work has been investigated since the early 90s (e.g. this work by Greffenstette) and has yielded some surprisingly good results. For example, here is a few random entries in a thesaurus I built recently by having my computer read wikipedia:

theory -> analysis, concept, approach, idea, method
voice -> vocal, tone, sound, melody, singing
james -> william, john, thomas, robert, george, charles

These lists of similar words were obtained entirely without human intervention- you feed text in and come back a few hours later.

The problem with phrases

You might ask why we are not doing the same thing for longer phrases, such as "ginger foxes love fruit". It's because we do not have enough text. In order for us to reliably establish what X is similar to, we need to see many examples of X being used in context. When X is a single word like "voice", this is not too hard. However, as X gets longer, the chances of finding natural occurrences of X get exponentially slower. For comparison, Google has about 1B pages containing the word "fox" and not a single page containing "ginger foxes love fruit", despite the fact that it is a perfectly valid English sentence and we all understand what it means.

Composition

To tackle the problem of data sparsity, we want to perform composition, i.e. to take vectors for words, which are easy to obtain from real text, and to put the together in a way that captures their meaning. The bad news is nobody has been able to do that well so far.

The simplest and most obvious way is to add or multiply the individual word vectors together. This leads to undesirable side effect that "cats chase dogs" and "dogs chase cats" would mean the same to your system. Also, if you are multiplying, you have to be extra careful or every sentences will end up represented by [0,0,0,...,0], which defeats the point.

Further reading

I will not discuss the more sophisticated methods for composition that have been proposed so far. I suggest you read Katrin Erk's "Vector space models of word meaning and phrase meaning: a survey". This is a very good high-level survey to get you started. Unfortunately, is not freely available on the publisher's website, email the author directly to get a copy. In that paper you will find references to many more concrete methods. The more comprehensible ones are by Mitchel and Lapata (2008) and Baroni and Zamparelli (2010).

Edit after comment by @vpekar: The bottom line of this answer is to stress the fact that while naive methods do exist (e.g. addition, multiplication, surface similarity, etc), these are fundamentally flawed and in general one should not expect great performance from them.

In Swift5 and Xcode 10

self.navigationItem.title = "your name"
let textAttributes = [NSAttributedStringKey.foregroundColor:UIColor.white]
navigationController?.navigationBar.titleTextAttributes = textAttributes

As I read your question, I have tried without success to search on the Internet how Bearer tokens are encrypted or signed. I guess bearer tokens are not hashed (maybe partially, but not completely) because in that case, it will not be possible to decrypt it and retrieve users properties from it.

But your question seems to be trying to find answers on Bearer token functionality:

Suppose I am implementing an authorization provider, can I supply any kind of string for the bearer token? Can it be a random string? Does it has to be a base64 encoding of some attributes? Should it be hashed?

So, I'll try to explain how Bearer tokens and Refresh tokens work:

When user requests to the server for a token sending user and password through SSL, the server returns two things: an Access token and a Refresh token.

An Access token is a Bearer token that you will have to add in all request headers to be authenticated as a concrete user.

Authorization: Bearer <access_token>

An Access token is an encrypted string with all User properties, Claims and Roles that you wish. (You can check that the size of a token increases if you add more roles or claims). Once the Resource Server receives an access token, it will be able to decrypt it and read these user properties. This way, the user will be validated and granted along with all the application.

Access tokens have a short expiration (ie. 30 minutes). If access tokens had a long expiration it would be a problem, because theoretically there is no possibility to revoke it. So imagine a user with a role="Admin" that changes to "User". If a user keeps the old token with role="Admin" he will be able to access till the token expiration with Admin rights. That's why access tokens have a short expiration.

But, one issue comes in mind. If an access token has short expiration, we have to send every short period the user and password. Is this secure? No, it isn't. We should avoid it. That's when Refresh tokens appear to solve this problem.

Refresh tokens are stored in DB and will have long expiration (example: 1 month).

A user can get a new Access token (when it expires, every 30 minutes for example) using a refresh token, that the user had received in the first request for a token. When an access token expires, the client must send a refresh token. If this refresh token exists in DB, the server will return to the client a new access token and another refresh token (and will replace the old refresh token by the new one).

In case a user Access token has been compromised, the refresh token of that user must be deleted from DB. This way the token will be valid only till the access token expires because when the hacker tries to get a new access token sending the refresh token, this action will be denied.

Copy Pasting @Lichtamberg's comments to gotoalberto's answer

Works also for Java 1.8:

# in ~/.zshrc and ~/.bashrc

export JAVA_HOME=/Library/Java/JavaVirtualMachines/jdk1.8.0_92.jdk/Contents/Home 
export PATH=$JAVA_HOME/bin:$PATH 

This fixed my issue on java 8.

Your first usage of Map is inside a function in the combat class. That happens before Map is defined, hence the error.

A forward declaration only says that a particular class will be defined later, so it's ok to reference it or have pointers to objects, etc. However a forward declaration does not say what members a class has, so as far as the compiler is concerned you can't use any of them until Map is fully declared.

The solution is to follow the C++ pattern of the class declaration in a .h file and the function bodies in a .cpp. That way all the declarations appear before the first definitions, and the compiler knows what it's working with.

In "References", import DAO 3.6 object reference.

private sub showTableData

dim db as dao.database
dim rs as dao.recordset

set db = currentDb
set rs = db.OpenRecordSet("myTable") 'myTable is a MS-Access table created previously

'populate the table
rs.movelast
rs.movefirst

do while not rs.EOF
   debug.print(rs!myField) 'myField is a field name in table myTable
   rs.movenext             'press Ctrl+G to see debuG window beneath
loop

msgbox("End of Table")

end sub

You can interate data objects like queries and filtered tables in different ways:

Trhough query:

private sub showQueryData

dim db as dao.database
dim rs as dao.recordset
dim sqlStr as string

sqlStr = "SELECT * FROM customers as c WHERE c.country='Brazil'"

set db = currentDb
set rs = db.openRecordset(sqlStr)

rs.movefirst

do while not rs.EOF
  debug.print("cust ID: " & rs!id & " cust name: " & rs!name)
  rs.movenext
loop

msgbox("End of customers from Brazil")

end sub

You should also look for "Filter" property of the recordset object to filter only the desired records and then interact with them in the same way (see VB6 Help in MS-Access code window), or create a "QueryDef" object to run a query and use it as a recordset too (a little bit more tricky). Tell me if you want another aproach.

I hope I've helped.

You can fetch from a remote repo, see the differences and then pull or merge.

This is an example for a remote repo called origin and a branch called master tracking the remote branch origin/master:

git checkout master                                                  
git fetch                                        
git diff origin/master
git pull --rebase origin master

There's already a question about this, you could perhaps read it

Deep cloning objects

There's no Clone() method as it exists in Java for example, but you could include a copy constructor in your clases, that's another good approach.

class A
{
  private int attr

  public int Attr
  {
     get { return attr; }
     set { attr = value }
  }

  public A()
  {
  }

  public A(A p)
  {
     this.attr = p.Attr;
  }  
}

This would be an example, copying the member 'Attr' when building the new object.

This is what has to occur.

You have to copy your DLL that you want to Register to: c:\windows\SysWOW64\

Then in the Run dialog, type this in: C:\Windows\SysWOW64\regsvr32.exe c:\windows\system32\YourDLL.dll

and you will get the message:

DllRegisterServer in c:\windows\system32\YourDLL.dll succeeded.

To redirect your logs output to a file, you need to use the FileAppender and need to define other file details in your log4j.properties/xml file. Here is a sample properties file for the same:

# Root logger option
log4j.rootLogger=INFO, file

# Direct log messages to a log file
log4j.appender.file=org.apache.log4j.RollingFileAppender
log4j.appender.file.File=C:\\loging.log
log4j.appender.file.MaxFileSize=1MB
log4j.appender.file.MaxBackupIndex=1
log4j.appender.file.layout=org.apache.log4j.PatternLayout
log4j.appender.file.layout.ConversionPattern=%d{yyyy-MM-dd HH:mm:ss} %-5p %c{1}:%L - %m%n

Follow this tutorial to learn more about log4j usage:

http://www.mkyong.com/logging/log4j-log4j-properties-examples/

Go to file->export->JAR file, there you may select "Export generated class files and sources" and make sure that your project is selected, and all folder under there are also! Good luck!

We have plenty of options to validate the react js forms. Maybe the npm packages have some own limitations. Based up on your needs you can choose the right validator packages. I would like to recommend some, those are listed below.

• react-form-input-validation
• redux-form

If anybody knows a better solution than this, please put it on the comment section for other people references.

Add the following css to disable the default scroll:

body {
    overflow: hidden;
}

And change the #content css to this to make the scroll only on content body:

#content {
    max-height: calc(100% - 120px);
    overflow-y: scroll;
    padding: 0px 10%;
    margin-top: 60px;
}

See fiddle here.

Edit:

Actually, I'm not sure what was the issue you were facing, since it seems that your css is working. I have only added the HTML and the header css statement:

html {_x000D_
  height: 100%;_x000D_
}_x000D_
html body {_x000D_
  height: 100%;_x000D_
  overflow: hidden;_x000D_
}_x000D_
html body .container-fluid.body-content {_x000D_
  position: absolute;_x000D_
  top: 50px;_x000D_
  bottom: 30px;_x000D_
  right: 0;_x000D_
  left: 0;_x000D_
  overflow-y: auto;_x000D_
}_x000D_
header {_x000D_
    position: absolute;_x000D_
    left: 0;_x000D_
    right: 0;_x000D_
    top: 0;_x000D_
    background-color: #4C4;_x000D_
    height: 50px;_x000D_
}_x000D_
footer {_x000D_
    position: absolute;_x000D_
    left: 0;_x000D_
    right: 0;_x000D_
    bottom: 0;_x000D_
    background-color: #4C4;_x000D_
    height: 30px;_x000D_
}

<link href="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.2/css/bootstrap.min.css" rel="stylesheet"/>_x000D_
<header></header>_x000D_
<div class="container-fluid body-content">_x000D_
  Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>_x000D_
  Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>_x000D_
  Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>_x000D_
  Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>_x000D_
  Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>Lorem Ipsum<br/>_x000D_
</div>_x000D_
<footer></footer>

I used pyenv uninstall my_virt_env_name to delete the virual environment.

Note: I'm using pyenv-virtualenv installed through the install script.

When you assign a variable to empty curly braces {} eg: new_set = {}, it becomes a dictionary. To create an empty set, assign the variable to a 'set()' ie: new_set = set()

If you are interested in the lifecycle state of the specific instance of the activity, siliconeagle's solution looks correct except that the new "active" variable should be an instance variable, rather than static.

You can chain your wheres directly, without function(q). There's also a nice date handling package in laravel, called Carbon. So you could do something like:

$projects = Project::where('recur_at', '>', Carbon::now())
    ->where('recur_at', '<', Carbon::now()->addWeek())
    ->where('status', '<', 5)
    ->where('recur_cancelled', '=', 0)
    ->get();

Just make sure you require Carbon in composer and you're using Carbon namespace (use Carbon\Carbon;) and it should work.

EDIT: As Joel said, you could do:

$projects = Project::whereBetween('recur_at', array(Carbon::now(), Carbon::now()->addWeek()))
    ->where('status', '<', 5)
    ->where('recur_cancelled', '=', 0)
    ->get();

Example for Remove table header or table body with jquery

function removeTableHeader(){_x000D_
  $('#myTableId thead').empty();_x000D_
}_x000D_
_x000D_
function removeTableBody(){_x000D_
    $('#myTableId tbody').empty();_x000D_
}

<script src="https://ajax.googleapis.com/ajax/libs/jquery/2.1.1/jquery.min.js"></script>_x000D_
<table id='myTableId'  border="1">_x000D_
  <thead>_x000D_
    <th>1st heading</th>_x000D_
    <th>2nd heading</th>_x000D_
    <th>3rd heading</th>_x000D_
  </thead>  _x000D_
  <tbody>_x000D_
    <tr>_x000D_
      <td>1st content</td>_x000D_
      <td>1st content</td>_x000D_
      <td>1st content</td>_x000D_
    </tr>_x000D_
    <tr>_x000D_
      <td>2nd content</td>_x000D_
      <td>2nd content</td>_x000D_
      <td>2nd content</td>_x000D_
    </tr>_x000D_
    <tr>_x000D_
      <td>3rd content</td>_x000D_
      <td>3rd content</td>_x000D_
      <td>3rd content</td>_x000D_
    </tr>_x000D_
  </tbody>_x000D_
</table>_x000D_
<br/>_x000D_
<form>_x000D_
  <input type='button' value='Remove Table Header' onclick='removeTableHeader()'/>_x000D_
  <input type='button' value='Remove Table Body' onclick='removeTableBody()'/>_x000D_
</form>

Use the re.escape() function for this:

4.2.3 re Module Contents

escape(string)

Return string with all non-alphanumerics backslashed; this is useful if you want to match an arbitrary literal string that may have regular expression metacharacters in it.

A simplistic example, search any occurence of the provided string optionally followed by 's', and return the match object.

def simplistic_plural(word, text):
    word_or_plural = re.escape(word) + 's?'
    return re.match(word_or_plural, text)

The following code creates and prints an array of strings in shell:

#!/bin/bash
array=("A" "B" "ElementC" "ElementE")
for element in "${array[@]}"
do
    echo "$element"
done

echo
echo "Number of elements: ${#array[@]}"
echo
echo "${array[@]}"

Result:

A
B
ElementC
ElementE

Number of elements: 4

A B ElementC ElementE

Try by changing X[:,3] to X.iloc[:,3] in label encoder

If you are sending alphanumeric data try changing

'Content-Type': 'multipart/form-data'

to

'Content-Type': 'application/x-www-form-urlencoded'

If you are sending non-alphanumeric data try to remove 'Content-Type' at all.

If it still does not work, consider trying request-promise (at least to test whether it is really axios problem or not)

The settings for Decimal are its precision and scale or in normal language, how many digits can a number have and how many digits do you want to have to the right of the decimal point.

So if you put PI into a Decimal(18,0) it will be recorded as 3?

If you put PI into a Decimal(18,2) it will be recorded as 3.14?

If you put PI into Decimal(18,10) be recorded as 3.1415926535.

You can modify with the following

<li><a href="./Index" class="elements"><span>Clients</span></a></li>

The extra dot means you are in the same controller. If you want change the controller to a different controller then you can write this

<li><a href="../newController/Index" class="elements"><span>Clients</span></a></li>

Like this?

dfTest = pd.DataFrame({
           'A':[14.00,90.20,90.95,96.27,91.21],
           'B':[103.02,107.26,110.35,114.23,114.68], 
           'C':['big','small','big','small','small']
         })
dfTest[['A','B']] = dfTest[['A','B']].apply(
                           lambda x: MinMaxScaler().fit_transform(x))
dfTest

    A           B           C
0   0.000000    0.000000    big
1   0.926219    0.363636    small
2   0.935335    0.628645    big
3   1.000000    0.961407    small
4   0.938495    1.000000    small

First of all open command prompt then open bin directory in cmd (i hope you're aware with cmd commands) go to bin directory of your MySql folder in WAMP program files.

run command

mysqldump -u db_username -p database_name > path_where_to_save_sql_file

press enter system will export particular database and create sql file to the given location.

i hope you got it :) if you have any question please let me know.

BLOB stores binary data which are more than 2 GB. Max size for BLOB is 4 GB. Binary data means unstructured data i.e images audio files vedio files digital signature

Text is used to store large string.

Float elements will be rendered at the line they are normally in the layout. To fix this, you have two choices:

Move the header and the p after the login box:

<div class='container'>
    <div class='hero-unit'>

        <div id='login-box' class='pull-right control-group'>
            <div class='clearfix'>
                <input type='text' placeholder='Username' />
            </div>
            <div class='clearfix'>
                <input type='password' placeholder='Password' />
            </div>
            <button type='button' class='btn btn-primary'>Log in</button>
        </div>

        <h2>Welcome</h2>

        <p>Please log in</p>

    </div>
</div>

Or enclose the left block in a pull-left div, and add a clearfix at the bottom

<div class='container'>
    <div class='hero-unit'>

        <div class="pull-left">

          <h2>Welcome</h2>

          <p>Please log in</p>

        </div>

        <div id='login-box' class='pull-right control-group'>
            <div class='clearfix'>
                <input type='text' placeholder='Username' />
            </div>
            <div class='clearfix'>
                <input type='password' placeholder='Password' />
            </div>
            <button type='button' class='btn btn-primary'>Log in</button>
        </div>

        <div class="clearfix"></div>

    </div>
</div>

tl;dr

• "Foo" and "bar" as metasyntactic variables were popularised by MIT and DEC, the first references are in work on LISP and PDP-1 and Project MAC from 1964 onwards.

• Many of these people were in MIT's Tech Model Railroad Club, where we find the first documented use of "foo" in tech circles in 1959 (and a variant in 1958).

• Both "foo" and "bar" (and even "baz") were well known in popular culture, especially from Smokey Stover and Pogo comics, which will have been read by many TMRC members.

• Also, it seems likely the military FUBAR contributed to their popularity.

The use of lone "foo" as a nonsense word is pretty well documented in popular culture in the early 20th century, as is the military FUBAR. (Some background reading: FOLDOC FOLDOC Jargon File Jargon File Wikipedia RFC3092)

OK, so let's find some references.

STOP PRESS! After posting this answer, I discovered this perfect article about "foo" in the Friday 14th January 1938 edition of The Tech ("MIT's oldest and largest newspaper & the first newspaper published on the web"), Volume LVII. No. 57, Price Three Cents:

On Foo-ism

The Lounger thinks that this business of Foo-ism has been carried too far by its misguided proponents, and does hereby and forthwith take his stand against its abuse. It may be that there's no foo like an old foo, and we're it, but anyway, a foo and his money are some party. (Voice from the bleachers- "Don't be foo-lish!")

As an expletive, of course, "foo!" has a definite and probably irreplaceable position in our language, although we fear that the excessive use to which it is currently subjected may well result in its falling into an early (and, alas, a dark) oblivion. We say alas because proper use of the word may result in such happy incidents as the following.

It was an 8.50 Thermodynamics lecture by Professor Slater in Room 6-120. The professor, having covered the front side of the blackboard, set the handle that operates the lift mechanism, turning meanwhile to the class to continue his discussion. The front board slowly, majestically, lifted itself, revealing the board behind it, and on that board, writ large, the symbols that spelled "FOO"!

The Tech newspaper, a year earlier, the Letter to the Editor, September 1937:

By the time the train has reached the station the neophytes are so filled with the stories of the glory of Phi Omicron Omicron, usually referred to as Foo, that they are easy prey.

...

It is not that I mind having lost my first four sons to the Grand and Universal Brotherhood of Phi Omicron Omicron, but I do wish that my fifth son, my baby, should at least be warned in advance.

Hopefully yours,

Indignant Mother of Five.

And The Tech in December 1938:

General trend of thought might be best interpreted from the remarks made at the end of the ballots. One vote said, '"I don't think what I do is any of Pulver's business," while another merely added a curt "Foo."

The first documented "foo" in tech circles is probably 1959's Dictionary of the TMRC Language:

FOO: the sacred syllable (FOO MANI PADME HUM); to be spoken only when under inspiration to commune with the Deity. Our first obligation is to keep the Foo Counters turning.

These are explained at FOLDOC. The dictionary's compiler Pete Samson said in 2005:

Use of this word at TMRC antedates my coming there. A foo counter could simply have randomly flashing lights, or could be a real counter with an obscure input.

And from 1996's Jargon File 4.0.0:

Earlier versions of this lexicon derived 'baz' as a Stanford corruption of bar. However, Pete Samson (compiler of the TMRC lexicon) reports it was already current when he joined TMRC in 1958. He says "It came from "Pogo". Albert the Alligator, when vexed or outraged, would shout 'Bazz Fazz!' or 'Rowrbazzle!' The club layout was said to model the (mythical) New England counties of Rowrfolk and Bassex (Rowrbazzle mingled with (Norfolk/Suffolk/Middlesex/Essex)."

A year before the TMRC dictionary, 1958's MIT Voo Doo Gazette ("Humor suplement of the MIT Deans' office") (PDF) mentions Foocom, in "The Laws of Murphy and Finagle" by John Banzhaf (an electrical engineering student):

Further research under a joint Foocom and Anarcom grant expanded the law to be all embracing and universally applicable: If anything can go wrong, it will!

Also 1964's MIT Voo Doo (PDF) references the TMRC usage:

Yes! I want to be an instant success and snow customers. Send me a degree in: ...

• Foo Counters

• Foo Jung

Let's find "foo", "bar" and "foobar" published in code examples.

So, Jargon File 4.4.7 says of "foobar":

Probably originally propagated through DECsystem manuals by Digital Equipment Corporation (DEC) in 1960s and early 1970s; confirmed sightings there go back to 1972.

The first published reference I can find is from February 1964, but written in June 1963, The Programming Language LISP: its Operation and Applications by Information International, Inc., with many authors, but including Timothy P. Hart and Michael Levin:

Thus, since "FOO" is a name for itself, "COMITRIN" will treat both "FOO" and "(FOO)" in exactly the same way.

Also includes other metasyntactic variables such as: FOO CROCK GLITCH / POOT TOOR / ON YOU / SNAP CRACKLE POP / X Y Z

I expect this is much the same as this next reference of "foo" from MIT's Project MAC in January 1964's AIM-064, or LISP Exercises by Timothy P. Hart and Michael Levin:

car[((FOO . CROCK) . GLITCH)]

It shares many other metasyntactic variables like: CHI / BOSTON NEW YORK / SPINACH BUTTER STEAK / FOO CROCK GLITCH / POOT TOOP / TOOT TOOT / ISTHISATRIVIALEXCERCISE / PLOOP FLOT TOP / SNAP CRACKLE POP / ONE TWO THREE / PLANE SUB THRESHER

For both "foo" and "bar" together, the earliest reference I could find is from MIT's Project MAC in June 1966's AIM-098, or PDP-6 LISP by none other than Peter Samson:

EXPLODE, like PRIN1, inserts slashes, so (EXPLODE (QUOTE FOO/ BAR)) PRIN1's as (F O O // / B A R) or PRINC's as (F O O / B A R).

Some more recallations.

@Walter Mitty recalled on this site in 2008:

I second the jargon file regarding Foo Bar. I can trace it back at least to 1963, and PDP-1 serial number 2, which was on the second floor of Building 26 at MIT. Foo and Foo Bar were used there, and after 1964 at the PDP-6 room at project MAC.

John V. Everett recalls in 1996:

When I joined DEC in 1966, foobar was already being commonly used as a throw-away file name. I believe fubar became foobar because the PDP-6 supported six character names, although I always assumed the term migrated to DEC from MIT. There were many MIT types at DEC in those days, some of whom had worked with the 7090/7094 CTSS. Since the 709x was also a 36 bit machine, foobar may have been used as a common file name there.

Foo and bar were also commonly used as file extensions. Since the text editors of the day operated on an input file and produced an output file, it was common to edit from a .foo file to a .bar file, and back again.

It was also common to use foo to fill a buffer when editing with TECO. The text string to exactly fill one disk block was IFOO$HXA127GA$$. Almost all of the PDP-6/10 programmers I worked with used this same command string.

Daniel P. B. Smith in 1998:

Dick Gruen had a device in his dorm room, the usual assemblage of B-battery, resistors, capacitors, and NE-2 neon tubes, which he called a "foo counter." This would have been circa 1964 or so.

Robert Schuldenfrei in 1996:

The use of FOO and BAR as example variable names goes back at least to 1964 and the IBM 7070. This too may be older, but that is where I first saw it. This was in Assembler. What would be the FORTRAN integer equivalent? IFOO and IBAR?

Paul M. Wexelblat in 1992:

The earliest PDP-1 Assembler used two characters for symbols (18 bit machine) programmers always left a few words as patch space to fix problems. (Jump to patch space, do new code, jump back) That space conventionally was named FU: which stood for Fxxx Up, the place where you fixed Fxxx Ups. When spoken, it was known as FU space. Later Assemblers ( e.g. MIDAS allowed three char tags so FU became FOO, and as ALL PDP-1 programmers will tell you that was FOO space.

Bruce B. Reynolds in 1996:

On the IBM side of FOO(FU)BAR is the use of the BAR side as Base Address Register; in the middle 1970's CICS programmers had to worry out the various xxxBARs...I think one of those was FRACTBAR...

Here's a straight IBM "BAR" from 1955.

Other early references:

• 1967 foo bar MIT AIM-127

• 1967 foo bar MIT AIM-127a

• 1965 foo MIT Tech Engineering News

• 1968 foo baz DEC

• 1971 FOO BAR UCLA-NMC RFC269

• 1972 FOO MIT AI

• 1972 FOO MIT AI HAKMEM (PDF scan)

• 1972 FOO DEC

• 1973 FOO DEC

• 1973 foo bar International Joint Council on Artificial Intelligence

• 1975 foo bar International Joint Council on Artificial Intelligence

• 1977 Foobar

• 1978 Foobar

• 1978 Moby Foobar in Software Wars

I haven't been able to find any references to foo bar as "inverted foo signal" as suggested in RFC3092 and elsewhere.

Here are a some of even earlier F00s but I think they're coincidences/false positives:

• 1959 "FOO 31 IBM-704 Bettis Plant Uses a least squares technique" U.S. Atomic Energy Commission

• 1960 FOO (FO Out, F1, F2, FOO, FOI) "Digital computer and control engineering"

• 1967 FOO?

The statement a = a + " " + b + " " + c can be broken down based upon pointers.

a + " " says give me what a points to, which can't be changed, and add " " to my current working set.

memory:

working_set = "Dog "
a = "Dog" 
b = "eats"
c = "treats"

+ b says give me what b points to, which can't be changed, and add it to current working set.

memory:

working_set = "Dog eats"
a = "Dog" 
b = "eats"
c = "treats"

+ " " + c says add " " to the current set. Then give me what c points to, which can't be changed, and add it to current working set. memory:

working_set = "Dog eats treats"
a = "Dog" 
b = "eats"
c = "treats"

Finally, a = says set my pointer to point to the resulting set.

memory:

a = "Dog eats treats"
b = "eats"
c = "treats"

"Dog" is reclaimed, because no more pointers connect to it's chunk of memory. We never modified the memory section "Dog" resided in, which is what is meant by immutable. However, we can change which labels, if any, point to that section of memory.

One thing you might want to do is look into the implementation of the Xt toolkit for X Window. Sure it is getting long in the tooth, but many of the structures used were designed to work in an OO fashion within traditional C. Generally this means adding an extra layer of indirection here and there and designing structures to lay over each other.

You can really do lots in the way of OO situated in C this way, even though it feels like it some times, OO concepts did not spring fully formed from the mind of #include<favorite_OO_Guru.h>. They really constituted many of the established best practice of the time. OO languages and systems only distilled and amplified parts of the programing zeitgeist of the day.

We can make it So simple like below

<input type="number"  onkeydown="javascript: return event.keyCode == 69 ? false : true" />

Updated Answer

we can make it even more simple as @88 MPG suggests

<input type="number" onkeydown="return event.keyCode !== 69" />

Just adding a parameter like the below worked for me.

cursor=conn.cursor(dictionary=True)

I hope this would be helpful either.

Replace var appDelegate : AppDelegate? with let appDelegate = UIApplication.sharedApplication().delegate as hinted on the second commented line in viewDidLoad().

The keyword "optional" refers exactly to the use of ?, see this for more details.

Try the common syntax instead:

if (strlen($message)<140) {
    echo "less than 140";
}
else
    if (strlen($message)>140) {
        echo "more than 140";
    }
    else {
        echo "exactly 140";
    }

For string manipulation, if you just want to kill everything after the ?, you can do this

string input = "http://www.somesite.com/somepage.aspx?whatever";
int index = input.IndexOf("?");
if (index > 0)
   input = input.Substring(0, index);

Edit: If everything after the last slash, do something like

string input = "http://www.somesite.com/somepage.aspx?whatever";
int index = input.LastIndexOf("/");
if (index > 0)
    input = input.Substring(0, index); // or index + 1 to keep slash

Alternately, since you're working with a URL, you can do something with it like this code

System.Uri uri = new Uri("http://www.somesite.com/what/test.aspx?hello=1");
string fixedUri = uri.AbsoluteUri.Replace(uri.Query, string.Empty);

Based on the answer of @Tyler McGinnis. I made a different approach using ES6 syntax and nested routes with wrapped components:

import React, { cloneElement, Children } from 'react'
import { Route, Redirect } from 'react-router-dom'

const PrivateRoute = ({ children, authed, ...rest }) =>
  <Route
    {...rest}
    render={(props) => authed ?
      <div>
        {Children.map(children, child => cloneElement(child, { ...child.props }))}
      </div>
      :
      <Redirect to={{ pathname: '/', state: { from: props.location } }} />}
  />

export default PrivateRoute

And using it:

<BrowserRouter>
  <div>
    <PrivateRoute path='/home' authed={auth}>
      <Navigation>
        <Route component={Home} path="/home" />
      </Navigation>
    </PrivateRoute>

    <Route exact path='/' component={PublicHomePage} />
  </div>
</BrowserRouter>

- (float)__getMemoryUsedPer1
{
    struct mach_task_basic_info info;
    mach_msg_type_number_t size = MACH_TASK_BASIC_INFO;
    kern_return_t kerr = task_info(mach_task_self(), MACH_TASK_BASIC_INFO, (task_info_t)&info, &size);
    if (kerr == KERN_SUCCESS)
    {
        float used_bytes = info.resident_size;
        float total_bytes = [NSProcessInfo processInfo].physicalMemory;
        //NSLog(@"Used: %f MB out of %f MB (%f%%)", used_bytes / 1024.0f / 1024.0f, total_bytes / 1024.0f / 1024.0f, used_bytes * 100.0f / total_bytes);
        return used_bytes / total_bytes;
    }
    return 1;
}

If one will use TASK_BASIC_INFO_COUNT instead of MACH_TASK_BASIC_INFO, you will get

kerr == KERN_INVALID_ARGUMENT (4)

if ($("#myid1").hasClass("mydivclass")){// Do any thing}

There is one interesting case of "class vs struct" puzzle - situation when you need to return several results from the method: choose which to use. If you know the ValueTuple story - you know that ValueTuple (struct) was added because it should be more effective then Tuple (class). But what does it mean in numbers? Two tests: one is struct/class that have 2 fields, other with struct/class that have 8 fields (with dimension more then 4 - class should become more effective then struct in terms processor ticks, but of course GC load also should be considered).

P.S. Another benchmark for specific case 'sturct or class with collections' is there: https://stackoverflow.com/a/45276657/506147

BenchmarkDotNet=v0.10.10, OS=Windows 10 Redstone 2 [1703, Creators Update] (10.0.15063.726)
Processor=Intel Core i5-2500K CPU 3.30GHz (Sandy Bridge), ProcessorCount=4
Frequency=3233540 Hz, Resolution=309.2586 ns, Timer=TSC
.NET Core SDK=2.0.3
  [Host] : .NET Core 2.0.3 (Framework 4.6.25815.02), 64bit RyuJIT
  Clr    : .NET Framework 4.7 (CLR 4.0.30319.42000), 64bit RyuJIT-v4.7.2115.0
  Core   : .NET Core 2.0.3 (Framework 4.6.25815.02), 64bit RyuJIT


            Method |  Job | Runtime |     Mean |     Error |    StdDev |      Min |      Max |   Median | Rank |  Gen 0 | Allocated |
------------------ |----- |-------- |---------:|----------:|----------:|---------:|---------:|---------:|-----:|-------:|----------:|
  TestStructReturn |  Clr |     Clr | 17.57 ns | 0.1960 ns | 0.1834 ns | 17.25 ns | 17.89 ns | 17.55 ns |    4 | 0.0127 |      40 B |
   TestClassReturn |  Clr |     Clr | 21.93 ns | 0.4554 ns | 0.5244 ns | 21.17 ns | 23.26 ns | 21.86 ns |    5 | 0.0229 |      72 B |
 TestStructReturn8 |  Clr |     Clr | 38.99 ns | 0.8302 ns | 1.4097 ns | 37.36 ns | 42.35 ns | 38.50 ns |    8 | 0.0127 |      40 B |
  TestClassReturn8 |  Clr |     Clr | 23.69 ns | 0.5373 ns | 0.6987 ns | 22.70 ns | 25.24 ns | 23.37 ns |    6 | 0.0305 |      96 B |
  TestStructReturn | Core |    Core | 12.28 ns | 0.1882 ns | 0.1760 ns | 11.92 ns | 12.57 ns | 12.30 ns |    1 | 0.0127 |      40 B |
   TestClassReturn | Core |    Core | 15.33 ns | 0.4343 ns | 0.4063 ns | 14.83 ns | 16.44 ns | 15.31 ns |    2 | 0.0229 |      72 B |
 TestStructReturn8 | Core |    Core | 34.11 ns | 0.7089 ns | 1.4954 ns | 31.52 ns | 36.81 ns | 34.03 ns |    7 | 0.0127 |      40 B |
  TestClassReturn8 | Core |    Core | 17.04 ns | 0.2299 ns | 0.2150 ns | 16.68 ns | 17.41 ns | 16.98 ns |    3 | 0.0305 |      96 B |

Code test:

using System;
using System.Text;
using System.Collections.Generic;
using BenchmarkDotNet.Attributes;
using BenchmarkDotNet.Attributes.Columns;
using BenchmarkDotNet.Attributes.Exporters;
using BenchmarkDotNet.Attributes.Jobs;
using DashboardCode.Routines.Json;

namespace Benchmark
{
    //[Config(typeof(MyManualConfig))]
    [RankColumn, MinColumn, MaxColumn, StdDevColumn, MedianColumn]
    [ClrJob, CoreJob]
    [HtmlExporter, MarkdownExporter]
    [MemoryDiagnoser]
    public class BenchmarkStructOrClass
    {
        static TestStruct testStruct = new TestStruct();
        static TestClass testClass = new TestClass();
        static TestStruct8 testStruct8 = new TestStruct8();
        static TestClass8 testClass8 = new TestClass8();
        [Benchmark]
        public void TestStructReturn()
        {
            testStruct.TestMethod();
        }

        [Benchmark]
        public void TestClassReturn()
        {
            testClass.TestMethod();
        }


        [Benchmark]
        public void TestStructReturn8()
        {
            testStruct8.TestMethod();
        }

        [Benchmark]
        public void TestClassReturn8()
        {
            testClass8.TestMethod();
        }

        public class TestStruct
        {
            public int Number = 5;
            public struct StructType<T>
            {
                public T Instance;
                public List<string> List;
            }

            public int TestMethod()
            {
                var s = Method1(1);
                return s.Instance;
            }

            private StructType<int> Method1(int i)
            {
                return Method2(++i);
            }

            private StructType<int> Method2(int i)
            {
                return Method3(++i);
            }

            private StructType<int> Method3(int i)
            {
                return Method4(++i);
            }

            private StructType<int> Method4(int i)
            {
                var x = new StructType<int>();
                x.List = new List<string>();
                x.Instance = ++i;
                return x;
            }
        }

        public class TestClass
        {
            public int Number = 5;
            public class ClassType<T>
            {
                public T Instance;
                public List<string> List;
            }

            public int TestMethod()
            {
                var s = Method1(1);
                return s.Instance;
            }

            private ClassType<int> Method1(int i)
            {
                return Method2(++i);
            }

            private ClassType<int> Method2(int i)
            {
                return Method3(++i);
            }

            private ClassType<int> Method3(int i)
            {
                return Method4(++i);
            }

            private ClassType<int> Method4(int i)
            {
                var x = new ClassType<int>();
                x.List = new List<string>();
                x.Instance = ++i;
                return x;
            }
        }

        public class TestStruct8
        {
            public int Number = 5;
            public struct StructType<T>
            {
                public T Instance1;
                public T Instance2;
                public T Instance3;
                public T Instance4;
                public T Instance5;
                public T Instance6;
                public T Instance7;
                public List<string> List;
            }

            public int TestMethod()
            {
                var s = Method1(1);
                return s.Instance1;
            }

            private StructType<int> Method1(int i)
            {
                return Method2(++i);
            }

            private StructType<int> Method2(int i)
            {
                return Method3(++i);
            }

            private StructType<int> Method3(int i)
            {
                return Method4(++i);
            }

            private StructType<int> Method4(int i)
            {
                var x = new StructType<int>();
                x.List = new List<string>();
                x.Instance1 = ++i;
                return x;
            }
        }

        public class TestClass8
        {
            public int Number = 5;
            public class ClassType<T>
            {
                public T Instance1;
                public T Instance2;
                public T Instance3;
                public T Instance4;
                public T Instance5;
                public T Instance6;
                public T Instance7;
                public List<string> List;
            }

            public int TestMethod()
            {
                var s = Method1(1);
                return s.Instance1;
            }

            private ClassType<int> Method1(int i)
            {
                return Method2(++i);
            }

            private ClassType<int> Method2(int i)
            {
                return Method3(++i);
            }

            private ClassType<int> Method3(int i)
            {
                return Method4(++i);
            }

            private ClassType<int> Method4(int i)
            {
                var x = new ClassType<int>();
                x.List = new List<string>();
                x.Instance1 = ++i;
                return x;
            }
        }
    }
}

Use double quotes while using BASH variables.

mysql --user="$user" --password="$password" --database="$database" --execute="DROP DATABASE $user; CREATE DATABASE $database;"

BASH doesn't expand variables in single quotes.

You could also do

function insertAfter(node1, node2) {
    node1.outerHTML += node2.outerHTML;
}

or

function insertAfter2(node1, node2) {
    var wrap = document.createElement("div");
    wrap.appendChild(node2.cloneNode(true));
    var node2Html = wrap.innerHTML;
    node1.insertAdjacentHTML('afterend', node2Html);
}

Even though this answer was too late, I'm adding it because I also went through a horrible time finding answer for the same matter. Only different was, I was struggling with AWS Comprehend Medical API.

At the moment I'm writing this answer, if anyone come across the same issue with any AWS SDKs please downgrade jackson-annotaions or any jackson dependencies to 2.8.* versions. The latest 2.9.* versions does not working properly with AWS SDK for some reason. Anyone have any idea about the reason behind that feel free to comment below.

Just in case if anyone is lazy to google maven repos, I have linked down necessary repos.Check them out!

• Jackson-Core Repo
• Jackson-Core-Databind - 2.8.11.3
• Jackson-Core - 2.8.6
• Jackson Annotations - 2.8.11

import com.sun.org.apache.xml.internal.serializer.OutputPropertiesFactory

transformer.setOutputProperty(OutputPropertiesFactory.S_KEY_INDENT_AMOUNT, "2");

You're over-thinking the problem:

sum(is.na(df$col))

Buffer is an area of memory used to temporarily store data while it's being moved from one place to another.

Cache is a temporary storage area used to store frequently accessed data for rapid access. Once the data is stored in the cache, future use can be done by accessing the cached copy rather than re-fetching the original data, so that the average access time is shorter.

Note: buffer and cache can be allocated on disk as well

Just for the record, I was running into the exact same problem and none of the answers worked.

I used a headers checker tool: http://www.webconfs.com/http-header-check.php

I was testing with my IP (http://192.0.2.1/upload) and what came back was the following:

HTTP/1.1 301 Moved Permanently => 
Date => Sat, 10 Jan 2015 04:03:35 GMT
Server => Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/1.0.0e PHP/5.3.8 mod_perl/2.0.4 Perl/v5.10.1
Location => http://192.0.2.1/upload/
Content-Length => 380
Connection => close
Content-Type => text/html; charset=iso-8859-1

There was a redirection happening and the AJAX request does not honor/follow redirects.

It turned out to be the missing slash at the end of the domain (http://192.0.2.1/upload/)

I tested again with slash at the end and I got this below. Added a slash in the script too, and it was now working.

HTTP/1.1 200 OK => 
Date => Sat, 10 Jan 2015 04:03:53 GMT
Server => Apache/2.2.21 (Win32) mod_ssl/2.2.21 OpenSSL/1.0.0e PHP/5.3.8 mod_perl/2.0.4 Perl/v5.10.1
X-Powered-By => PHP/5.3.8
Access-Control-Allow-Origin => *
Access-Control-Allow-Methods => PUT, GET, POST, DELETE, OPTIONS
Access-Control-Allow-Headers => *
Content-Length => 1435
Connection => close
Content-Type => text/html

Use this tool to test if your headers are good and to troubleshoot what is happening.

As of TypeScript 2.0 you can include typings for native promises by including the following in your tsconfig.json

"compilerOptions": {
    "lib": ["es5", "es2015.promise"]
}

This will include the promise declarations that comes with TypeScript without having to set the target to ES6.

Just as a heads up, the '=' operator will pad strings with spaces in Transact-SQL. So 'abc' = 'abc ' will return true; 'abc' LIKE 'abc ' will return false. In most cases '=' will be correct, but in a recent case of mine it was not.

So while '=' is faster, LIKE might more explicitly state your intentions.

http://support.microsoft.com/kb/316626

An alternative, you can also use fopen

$params = array('http' => array(
    'method' => 'POST',
    'content' => 'toto=1&tata=2'
));

$ctx = stream_context_create($params);
$fp = @fopen($sUrl, 'rb', false, $ctx);
if (!$fp)
{
    throw new Exception("Problem with $sUrl, $php_errormsg");
}

$response = @stream_get_contents($fp);
if ($response === false) 
{
    throw new Exception("Problem reading data from $sUrl, $php_errormsg");
}

AFAIK, {...} can only be used as a path, not inside a query-param. Try this instead:

public interface FooService {    

    @GET("/maps/api/geocode/json?sensor=false")
    void getPositionByZip(@Query("address") String address, Callback<String> cb);
}

If you have an unknown amount of parameters to pass, you can use do something like this:

public interface FooService {    

    @GET("/maps/api/geocode/json")
    @FormUrlEncoded
    void getPositionByZip(@FieldMap Map<String, String> params, Callback<String> cb);
}

This lovely detailed error is still present in 2019! I just want to add that if your web.config is valid and accessible it most likely is a dependency issue.

As mentioned by the OP it was a AJAX module, and as by others commonly the Rewrite module. Just keep your eyes open in your web.config what modules and libraries your tags are referencing to since the error code 0x8007000d can be about ANY dependency.

In my case I didn't realize the AspNetCore bundle was missing and had to be installed! So happy I found this post!!

Since you're using requests, you should use the response's json method.

import requests

response = requests.get(...)
data = response.json()

It autodetects which decoder to use.

Use ?:

<form action="?" method="post">

It will send the user back to the same page.

This is covered in android docs http://developer.android.com/training/monitoring-device-state/connectivity-monitoring.html

I know I'm a little late to the party, but I did want to throw some interjections. (I would have commented but not enough reputation points yet, so, here's a full answer).

This requires the latest version of VS Code, Azure Repo Extention, and Git to be installed.

Anyone looking to use the new VS Code (or using the preview like myself), when you go to the Settings (Still File -> Preferences -> Settings or CTRL+, ) you'll be looking under User Settings -> Extensions -> Azure Repos.

Then under Tfvc: Location you can paste the location of the executable.

For 2017 it'll be

C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team Explorer\TF.exe

Or for 2019 (Preview)

C:\Program Files (x86)\Microsoft Visual Studio\2019\Preview\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team Explorer\TF.exe

After adding the location, I closed my VS Code (not sure if this was needed) and went my git repo to copy the git URL.

After that, went back into VS Code went to the Command Palette (View -> Command Palette or CTRL+Shift+P) typed Git: Clone pasted my repo:

Selected the location for the repo to be stored. Next was an error that popped up. I proceeded to follow this video which walked me through clicking on the Team button with the exclamation mark on the bottom of your VS Code Screen

Then chose the new method of authentication

Copy by using CTRL+C and then press enter. Your browser will launch a page where you'll enter the code you copied (CTRL+V).

Click Continue

Log in with your Microsoft Credentials and you should see a change on the bottom bar of VS Code.

Cheers!

declare a double value and convert to long convert to string and formated to float the double value finally replace all the value like 123456789,0000 to 123456789

Double value = double value ;
Long longValue = value.longValue();  String strCellValue1 = new String(longValue.toString().format("%f",value).replaceAll("\\,?0*$", ""));

Please try this query. Answer To above post:

select @msgID, account_id
    from viewMailAccountsHeirachy
    where 
    CASE @smartLocationType
        WHEN 'store' THEN account_location
        WHEN 'area' THEN xxx_location_area 
        WHEN 'division' THEN xxx_location_division 
        WHEN 'company' THEN xxx_location_company 
    END  = @smartLocation

Call SYS_CONTEXT to get the current schema. From Ask Tom "How to get current schema:

select sys_context( 'userenv', 'current_schema' ) from dual;

So this question has been answered but to me the code used is not simple enough or complete. To me this bit here is what I was looking for and possibly some other people will like this as well.

string dateString = "198101";

if (DateTime.TryParse(dateString, out DateTime Temp) == true)
{
     //do stuff
}

The output is stored in Temp and not needed afterwards, datestring is the input string to be tested.

You have to use the following code:

response.writeHead(302 , {
           'Location' : '/view/index.html' // This is your url which you want
        });
response.end();

I am tried all the above answers, but not worked for me. I was using Windows 10 and had installed Visual Studio 2010 In my case need add vcvars64.bat to C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\amd64

below is vcvars64.bat:

CALL "C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd" /x64

Install Microsoft SDK 7.1 if you not install, and rerun pip install dulwich

RStudio has a good free IDE that allows for Markdown and LaTeX.

The only way I managed to see my outgoing headers (curl with php) was using the following options:

curl_setopt($ch, CURLOPT_HEADER, 1);
curl_setopt($ch, CURLINFO_HEADER_OUT, true);

Getting your debug info:

$data = curl_exec($ch);
var_dump($data);
var_dump(curl_getinfo($ch));

Make sure that you have compiled your *.cs file before browsing the ASPX page.

While the above solutions do work, there is a very simple solution shall we say in "layman's" terms. Someone still learning python and string's can use the other answers but they don't really understand how they work or what each part of the code is doing without a full explanation by the poster as opposed to "this works". The following executes the swapping of every second character in a string and is easy for beginners to understand how it works.

It is simply iterating through the string (any length) by two's (starting from 0 and finding every second character) and then creating a new string (swapped_pair) by adding the current index + 1 (second character) and then the actual index (first character), e.g., index 1 is put at index 0 and then index 0 is put at index 1 and this repeats through iteration of string.

Also added code to ensure string is of even length as it only works for even length.

DrSanjay Bhakkad post above is also a good one that works for even or odd strings and is basically doing the same function as below.

string = "abcdefghijklmnopqrstuvwxyz123"

# use this prior to below iteration if string needs to be even but is possibly odd
if len(string) % 2 != 0:
    string = string[:-1]

# iteration to swap every second character in string
swapped_pair = ""
for i in range(0, len(string), 2):
    swapped_pair += (string[i + 1] + string[i])

# use this after above iteration for any even or odd length of strings
if len(swapped_pair) % 2 != 0:
    swapped_adj += swapped_pair[-1]

print(swapped_pair)

badcfehgjilknmporqtsvuxwzy21 # output if the "needs to be even" code used
badcfehgjilknmporqtsvuxwzy213 # output if the "even or odd" code used

I found that selecting a clob column in CTE caused this explosion. ie

with cte as (
    select
        mytable1.myIntCol,
        mytable2.myClobCol
    from mytable1
    join mytable2 on ...
)
select myIntCol, myClobCol
from cte
where ...

presumably because oracle can't handle a clob in a temporary table.

Because my values were longer than 4K, I couldn't use to_char().
My work around was to select it from the final select, ie

with cte as (
    select
        mytable1.myIntCol
    from mytable1
)
select myIntCol, myClobCol
from cte
join mytable2 on ...
where ...

Too bad if this causes a performance problem.

a = sin²(?f/2) + cos f1 · cos f2 · sin²(??/2)

c = 2 · atan2( va, v(1-a) )

distance = R · c

where f is latitude, ? is longitude, R is earth’s radius (mean radius = 6,371km);

note that angles need to be in radians to pass to trig functions!

fun distanceInMeter(firstLocation: Location, secondLocation: Location): Double {
    val earthRadius = 6371000.0
    val deltaLatitudeDegree = (firstLocation.latitude - secondLocation.latitude) * Math.PI / 180f
    val deltaLongitudeDegree = (firstLocation.longitude - secondLocation.longitude) * Math.PI / 180f
    val a = sin(deltaLatitudeDegree / 2).pow(2) +
            cos(firstLocation.latitude * Math.PI / 180f) * cos(secondLocation.latitude * Math.PI / 180f) *
            sin(deltaLongitudeDegree / 2).pow(2)
    val c = 2f * atan2(sqrt(a), sqrt(1 - a))
    return earthRadius * c
}


data class Location(val latitude: Double, val longitude: Double)

The best two options are BufferedReader and Scanner.

The most widely used method is Scanner and I personally prefer it because of its simplicity and easy implementation, as well as its powerful utility to parse text into primitive data.

Advantages of Using Scanner

• Easy to use the Scanner class
• Easy input of numbers (int, short, byte, float, long and double)
• Exceptions are unchecked which is more convenient. It is up to the programmer to be civilized, and specify or catch the exceptions.
• Is able to read lines, white spaces, and regex-delimited tokens

Advantages of BufferedInputStream

• BufferedInputStream is about reading in blocks of data rather than a single byte at a time
• Can read chars, char arrays, and lines
• Throws checked exceptions
• Fast performance
• Synchronized (you cannot share Scanner between threads)

Overall each input method has different purposes.

• If you are inputting large amount of data BufferedReader might be better for you

• If you are inputting lots of numbers Scanner does automatic parsing which is very convenient

For more basic uses I would recommend the Scanner because it is easier to use and easier to write programs with. Here is a quick example of how to create a Scanner. I will provide a comprehensive example below of how to use the Scanner

Scanner scanner = new Scanner (System.in); // create scanner
System.out.print("Enter your name");       // prompt user
name = scanner.next();                     // get user input

(For more info about BufferedReader see How to use a BufferedReader and see Reading lines of Chars)

java.util.Scanner

import java.util.InputMismatchException; // import the exception catching class
import java.util.Scanner; // import the scanner class

public class RunScanner {

    // main method which will run your program
    public static void main(String args[]) {

        // create your new scanner
        // Note: since scanner is opened to "System.in" closing it will close "System.in". 
        // Do not close scanner until you no longer want to use it at all.
        Scanner scanner = new Scanner(System.in);

        // PROMPT THE USER
        // Note: when using scanner it is recommended to prompt the user with "System.out.print" or "System.out.println"
        System.out.println("Please enter a number");

        // use "try" to catch invalid inputs
        try {

            // get integer with "nextInt()"
            int n = scanner.nextInt();


            System.out.println("Please enter a decimal"); // PROMPT
            // get decimal with "nextFloat()"
            float f = scanner.nextFloat();


            System.out.println("Please enter a word"); // PROMPT
            // get single word with "next()"
            String s = scanner.next();

            // ---- Note: Scanner.nextInt() does not consume a nextLine character /n 
            // ---- In order to read a new line we first need to clear the current nextLine by reading it:
            scanner.nextLine(); 
            // ----
            System.out.println("Please enter a line"); // PROMPT
            // get line with "nextLine()"
            String l = scanner.nextLine();


            // do something with the input
            System.out.println("The number entered was: " + n);
            System.out.println("The decimal entered was: " + f);
            System.out.println("The word entered was: " + s);
            System.out.println("The line entered was: " + l);


        }
        catch (InputMismatchException e) {
            System.out.println("\tInvalid input entered. Please enter the specified input");
        }

        scanner.close(); // close the scanner so it doesn't leak
    }
}

^{Note: Other classes such as Console and DataInputStream are also viable alternatives.}

^{Console has some powerful features such as ability to read passwords, however, is not available in all IDE's (such as Eclipse). The reason this occurs is because Eclipse runs your application as a background process and not as a top-level process with a system console. Here is a link to a useful example on how to implement the Console class.}

^{DataInputStream is primarily used for reading input as a primitive datatype, from an underlying input stream, in a machine-independent way. DataInputStream is usually used for reading binary data. It also provides convenience methods for reading certain data types. For example, it has a method to read a UTF String which can contain any number of lines within them.}

^{However, it is a more complicated class and harder to implement so not recommended for beginners. Here is a link to a useful example how to implement a DataInputStream.}

RFC6648 recommends that you assume that your custom header "might become standardized, public, commonly deployed, or usable across multiple implementations." Therefore, it recommends not to prefix it with "X-" or similar constructs.

However, there is an exception "when it is extremely unlikely that [your header] will ever be standardized." For such "implementation-specific and private-use" headers, the RFC says a namespace such as a vendor prefix is justified.

I have streamlined the answer of @Quirliom above into functions that can be used:

private static boolean hasLength(CharSequence data) {
    if (String.valueOf(data).length() >= 8) return true;
    else return false;
}

private static boolean hasSymbol(CharSequence data) {
    String password = String.valueOf(data);
    boolean hasSpecial = !password.matches("[A-Za-z0-9 ]*");
    return hasSpecial;
}

private static boolean hasUpperCase(CharSequence data) {
    String password = String.valueOf(data);
    boolean hasUppercase = !password.equals(password.toLowerCase());
    return hasUppercase;
}

private static boolean hasLowerCase(CharSequence data) {
    String password = String.valueOf(data);
    boolean hasLowercase = !password.equals(password.toUpperCase());
    return hasLowercase;
}

My understanding is this:

• A computer program is a set of instructions that can be executed on a computer.
• An application is software that directly helps a user perform tasks.
• The two intersect, but are not synonymous. A program with a user-interface is an application, but many programs are not applications.

Solution

https://www.npmjs.com/package/babel-register

// This is to allow ES6 export syntax
// to be properly read and processed by node.js application
require('babel-register')({
  presets: [
    'env',
  ],
});

// After that, any line you add below that has typical ES6 export syntax
// will work just fine

const utils = require('../../utils.js');
const availableMixins = require('../../../src/lib/mixins/index.js');

Below is definition of file *mixins/index.js

export { default as FormValidationMixin } from './form-validation'; // eslint-disable-line import/prefer-default-export

That worked just fine inside my Node.js CLI application.

Dim f as Range

Set f=ActiveSheet.Cells.Find(...)

If Not f Is Nothing then
    msgbox "Row=" & f.Row & vbcrlf & "Column=" & f.Column
Else
    msgbox "value not found!"
End If

vscode

I use vscode for java and it works pretty much the same as visual studio except you use comments:

//#region name

//code

//#endregion

If you use ios simulator you can open system console log on MAC

? + space and type "console" -> press "Enter" to open system console log then select your simulator

Use

Try_convert(float,[Value])

See https://raresql.com/2013/04/26/sql-server-how-to-convert-varchar-to-float/

Add your own flavour of the font awesome style

[class^="icon-"], [class*=" icon-"] {
    display: inline-block;
    width: 100%;
}

which along with your

td i {
    text-align:center;
}

should center just the icons.

Only for the sake of statistics:

The machine is old Dell with new SSD

CPU: Intel Pentium D 2,8 Ghz

SSD: Patriot Inferno 120GB SSD

4000000 'records'
175.47607421875 MB

Iteration 0
Writing raw... 3.547 seconds
Writing buffered (buffer size: 8192)... 2.625 seconds
Writing buffered (buffer size: 1048576)... 2.203 seconds
Writing buffered (buffer size: 4194304)... 2.312 seconds

Iteration 1
Writing raw... 2.922 seconds
Writing buffered (buffer size: 8192)... 2.406 seconds
Writing buffered (buffer size: 1048576)... 2.015 seconds
Writing buffered (buffer size: 4194304)... 2.282 seconds

Iteration 2
Writing raw... 2.828 seconds
Writing buffered (buffer size: 8192)... 2.109 seconds
Writing buffered (buffer size: 1048576)... 2.078 seconds
Writing buffered (buffer size: 4194304)... 2.015 seconds

Iteration 3
Writing raw... 3.187 seconds
Writing buffered (buffer size: 8192)... 2.109 seconds
Writing buffered (buffer size: 1048576)... 2.094 seconds
Writing buffered (buffer size: 4194304)... 2.031 seconds

Iteration 4
Writing raw... 3.093 seconds
Writing buffered (buffer size: 8192)... 2.141 seconds
Writing buffered (buffer size: 1048576)... 2.063 seconds
Writing buffered (buffer size: 4194304)... 2.016 seconds

As we can see the raw method is slower the buffered.

This allows you to just get the image data and set to the img src, which is cool.

var oReq = new XMLHttpRequest();
oReq.open("post", '/somelocation/getmypic', true );        
oReq.responseType = "blob";
oReq.onload = function ( oEvent )
{
    var blob = oReq.response;
    var imgSrc = URL.createObjectURL( blob );                        
    var $img = $( '<img/>', {                
        "alt": "test image",
        "src": imgSrc
    } ).appendTo( $( '#bb_theImageContainer' ) );
    window.URL.revokeObjectURL( imgSrc );
};
oReq.send( null );

The basic idea is that the data is returned untampered with, it is placed in a blob and then a url is created to that object in memory. See here and here. Note supported browsers.

Depending what you really mean, I propose the following solutions:

1. You mean a list of space separated sub-strings and want to know what is the sub-string position number among all sub-strings:

   s = 'sub1 sub2 sub3'
   s.split().index('sub2')
   >>> 1
   

2. You mean the char-position of the sub-string in the string:

   s.find('sub2')
   >>> 5
   

3. You mean the (non-overlapping) counts of appearance of a su-bstring:

   s.count('sub2')
   >>> 1
   s.count('sub')
   >>> 3
   

Download Androidx86 from this This is an iso file, so you'd
need something like VMWare or VirtualBox to run it When creating the virtual machine, you need to set the type of guest OS as Linux instead of Other.

After creating the virtual machine set the network adapter to 'Bridged'. · Start the VM and select 'Live CD VESA' at boot.

Now you need to find out the IP of this VM. Go to terminal in VM (use Alt+F1 & Alt+F7 to toggle) and use the netcfg command to find this.

Now you need open a command prompt and go to your android install folder (on host). This is usually C:\Program Files\Android\android-sdk\platform-tools>.

Type adb connect IP_ADDRESS. There done! Now you need to add Bluetooth. Plug in your USB Bluetooth dongle/Bluetooth device.

In VirtualBox screen, go to Devices>USB devices. Select your dongle.

Done! now your Android VM has Bluetooth. Try powering on Bluetooth and discovering/paring with other devices.

Now all that remains is to go to Eclipse and run your program. The Android AVD manager should show the VM as a device on the list.

Alternatively, Under settings of the virtual machine, Goto serialports -> Port 1 check Enable serial port select a port number then select port mode as disconnected click ok. now, start virtual machine. Under Devices -> USB Devices -> you can find your laptop bluetooth listed. You can simply check the option and start testing the android bluetooth application .

Source

This answer is counting that the second parameter is useless when calling removeAttr! (as it was when this answer was posted) Do not use this otherwise!

Can't beat RienNeVaPlus's clean answer, but it does the job as well, it's basically a more compressed way to do the ternary operation:

$('.list-sort')[$('.list-sort').hasAttr('colspan') ? 
    'removeAttr' : 'attr']('colspan', 6);

an extra variable can be used in these cases, when you need to use the reference more than once:

var $listSort = $('.list-sort'); 
$listSort[$listSort.hasAttr('colspan') ? 'removeAttr' : 'attr']('colspan', 6);

What is unittesting? It is tricky to define. On a technical level, you build functions that call functions in your codebase and validate the results. Basically, you get a bunch of things like "assert(5+3) == 8", just more complicated (as in DataLayer(MockDatabase()).getUser().name == "Dilbert"). On a tool-view-level, you add an automated, project-specific check if everything still works like you assumed things worked. This is very, very helpful if you refactor and if you implement complicated algorithms. The result generally is a bunch of documentation and a lot less bugs, because the behaviour of the code is pinned down.

I build test cases for all the edge cases and run them similar to the workings of a generational garbage collector. While I implement a class, I only run the test cases that involve the class. Once I am done with working on that class, I run all unittests in order to see if everything still works.

You should test as much as possible, as long as the test code is easy enough to stay untested. Given that, no, not everything is testable in a sane way. Think User interfaces. Think a driver for a space shuttle or a nuclear bomb (at least not with pure JUnit-tests ;) ). However, lots and lots of code is testable. Datastructures are. Algorithms are. Most Applicationlogic-classes are. So test it!

HTH. tetha

I had a recent issue with an update to Swift 5 where the table view would flash select and then deselect the selected cell. I tried several of the solutions here and none worked. The solution is setting clearsSelectionOnViewWillAppear to false.

I had previously used the UIView and selectedBackgroundColor property, so I kept with that approach.

override func tableView(_ tableView: UITableView, cellForRowAt indexPath: IndexPath) -> UITableViewCell {
  let cell = tableView.dequeueReusableCell(withIdentifier: "popoverCell", for: indexPath) as! PopoverCell

  let backgroundView = UIView()
  backgroundView.backgroundColor = Color.Blue
  cell.selectedBackgroundView = backgroundView
}

Below are the changes I needed for Swift 5. The property clearsSelectionOnViewWillAppear was the reason my cells were deselecting. The following select was necessary on first load.

override func viewDidLoad() {
  super.viewDidLoad()

  clearsSelectionOnViewWillAppear = false
  popoverTableView.selectRow(at: selectedIndexPath, animated: false, scrollPosition: .none)
}

I just want to echo sam9046's modest comment as an alternative and potentially much easier solution that worked in my case: uninstall and install homebrew again from scratch. No sudo commands required.

You can also browse/modify the uninstall script from that link above if you need to ensure it won't affect your previously installed packages. In my case this was just my home machine so I just started over.

where is probably what you're looking for. So

data=data.where(data=='-', None) 

From the panda docs:

where [returns] an object of same shape as self and whose corresponding entries are from self where cond is True and otherwise are from other).

Routes

export const MyRoutes: Routes = [
    { path: '/items/:id', component: MyComponent }
]

Component

import { ActivatedRoute } from '@angular/router';
public id: string;

constructor(private route: ActivatedRoute) {}

ngOnInit() {
   this.id = this.route.snapshot.paramMap.get('id');
}

For protobuf 2.5, use the dependency:

"com.googlecode.protobuf-java-format" % "protobuf-java-format" % "1.2"

Then use the code:

com.googlecode.protobuf.format.JsonFormat.merge(json, builder)
com.googlecode.protobuf.format.JsonFormat.printToString(proto)

I had the same problem,

what you have to do is declare the second cursor as: DECLARE [second_cursor] Cursor LOCAL For

You see"CURSOR LOCAL FOR" instead of "CURSOR FOR"

To get the right ownership, you can set the group setuid bit on the directory with

chmod g+rwxs dirname

This will ensure that files created in the directory are owned by the group. You should then make sure everyone runs with umask 002 or 007 or something of that nature---this is why Debian and many other linux systems are configured with per-user groups by default.

I don't know of a way to force the permissions you want if the user's umask is too strong.

You can try in this way.

   for(int a=5;a>0;a--){
        int b=0;
       for(b=0;b<a;b++){
           System.out.print(" ");
       }
        for (int j=b;j<5;j++){
            System.out.print(" $ ");
        }
        System.out.println("");

    }

Out put

      $ 
     $  $ 
    $  $  $ 
   $  $  $  $ 

I use AJAX to do this. You have your partial with your typical twitter modal template html:

<div class="container">
  <!-- Modal -->
  <div class="modal fade" id="LocationNumberModal" role="dialog">
    <div class="modal-dialog">
      <!-- Modal content-->
      <div class="modal-content">
        <div class="modal-header">
          <button type="button" class="close" data-dismiss="modal">
            &times;
          </button>
          <h4 class="modal-title">
            Serial Numbers
          </h4>
        </div>
        <div class="modal-body">
          <span id="test"></span>
          <p>Some text in the modal.</p>
        </div>
        <div class="modal-footer">
          <button type="button" class="btn btn-default" data-dismiss="modal">
            Close
          </button>
        </div>
      </div>
    </div>
  </div>
</div>

Then you have your controller method, I use JSON and have a custom class that rendors the view to a string. I do this so I can perform multiple ajax updates on the screen with one ajax call. Reference here: Example but you can use an PartialViewResult/ActionResult on return if you are just doing the one call. I will show it using JSON..

And the JSON Method in Controller:

public JsonResult LocationNumberModal(string partNumber = "")
{
  //Business Layer/DAL to get information
  return Json(new {
      LocationModal = ViewUtility.RenderRazorViewToString(this.ControllerContext, "LocationNumberModal.cshtml", new SomeModelObject())
    },
    JsonRequestBehavior.AllowGet
  );
}

And then, in the view using your modal: You can package the AJAX in your partial and call @{Html.RenderPartial... Or you can have a placeholder with a div:

<div id="LocationNumberModalContainer"></div>

then your ajax:

function LocationNumberModal() {
  var partNumber = "1234";

  var src = '@Url.Action("LocationNumberModal", "Home", new { area = "Part" })'
    + '?partNumber='' + partNumber; 

  $.ajax({
    type: "GET",
    url: src,
    dataType: "json",
    contentType: "application/json; charset=utf-8",
    success: function (data) {
      $("#LocationNumberModalContainer").html(data.LocationModal);
      $('#LocationNumberModal').modal('show');
    }
  });
};

Then the button to your modal:

<button type="button" id="GetLocBtn" class="btn btn-default" onclick="LocationNumberModal()">Get</button>

live example

" hello world " example

with factory / service / provider :

var myApp = angular.module('myApp', []);
 
//service style, probably the simplest one
myApp.service('helloWorldFromService', function() {
    this.sayHello = function() {
        return "Hello, World!"
    };
});
 
//factory style, more involved but more sophisticated
myApp.factory('helloWorldFromFactory', function() {
    return {
        sayHello: function() {
            return "Hello, World!"
        }
    };
});
    
//provider style, full blown, configurable version     
myApp.provider('helloWorld', function() {
    // In the provider function, you cannot inject any
    // service or factory. This can only be done at the
    // "$get" method.
 
    this.name = 'Default';
 
    this.$get = function() {
        var name = this.name;
        return {
            sayHello: function() {
                return "Hello, " + name + "!"
            }
        }
    };
 
    this.setName = function(name) {
        this.name = name;
    };
});
 
//hey, we can configure a provider!            
myApp.config(function(helloWorldProvider){
    helloWorldProvider.setName('World');
});
        
 
function MyCtrl($scope, helloWorld, helloWorldFromFactory, helloWorldFromService) {
    
    $scope.hellos = [
        helloWorld.sayHello(),
        helloWorldFromFactory.sayHello(),
        helloWorldFromService.sayHello()];
}?

You have a few options including the "Round-trip ("O") format specifier".

var date1 = new DateTime(2008, 3, 1, 7, 0, 0);
Console.WriteLine(date1.ToString("O"));
Console.WriteLine(date1.ToString("s", System.Globalization.CultureInfo.InvariantCulture));

Output

2008-03-01T07:00:00.0000000
2008-03-01T07:00:00

However, DateTime + TimeZone may present other problems as described in the blog post DateTime and DateTimeOffset in .NET: Good practices and common pitfalls:

DateTime has countless traps in it that are designed to give your code bugs:

1.- DateTime values with DateTimeKind.Unspecified are bad news.

2.- DateTime doesn't care about UTC/Local when doing comparisons.

3.- DateTime values are not aware of standard format strings.

4.- Parsing a string that has a UTC marker with DateTime does not guarantee a UTC time.

I had this problem as I created a class "Response.cs" inside a folder named "Response". So VS was catching the new Response () as Folder/namespace.

So I changed the class name to StatusResponse.cs and called new StatusResponse().This solved the issue.

try this:

public int getIndexOfMin(List<Float> data) {
    float min = Float.MAX_VALUE;
    int index = -1;
    for (int i = 0; i < data.size(); i++) {
        Float f = data.get(i);
        if (Float.compare(f.floatValue(), min) < 0) {
            min = f.floatValue();
            index = i;
        }
    }
    return index;
}

in input field make name same like

<input type="radio" name="option" value="option1">
<input type="radio" name="option" value="option2" >
<input type="radio" name="option" value="option3" >
<input type="radio" name="option" value="option3" >

If you have access to server's JMX interface, the start & end offsets are present at:

kafka.log:type=Log,name=LogStartOffset,topic=TOPICNAME,partition=PARTITIONNUMBER
kafka.log:type=Log,name=LogEndOffset,topic=TOPICNAME,partition=PARTITIONNUMBER

(you need to replace TOPICNAME & PARTITIONNUMBER). Bear in mind you need to check for each of the replicas of given partition, or you need to find out which one of the brokers is the leader for a given partition (and this can change over time).

Alternatively, you can use Kafka Consumer methods beginningOffsets and endOffsets.

Here's a simple CSS solution that'll work:

#fix-footer{
    position: fixed;
    left: 0px;
    bottom: 0px;
    height: 35px;
    width: 100%;
    background: #1abc9c;
}

What about this? ES 2017 i suppose:

const array1 = [1, 3, 5];_x000D_
const array2 = [1, 5, 3];_x000D_
_x000D_
const isEqual = (array1.length === array2.length) && (array1.every(val => array2.includes(val)));_x000D_
console.log(isEqual);

1st condition checks if both arrays have same length and 2nd condition checks if 1st array is a subset of the 2nd array. Combining these 2 conditions should then result in comparison of all items of the 2 arrays irrespective of the ordering of elements.

The above code will only work if both arrays have non-duplicate items.

Just use:

 path.resolve("./") ... output is your project root directory

Edit your index.html file location in the public folder. Copy your image to same location as index.html in public folder. And then replace the part of the contents of index.html containing <div id="root"> </div> tags to the below given html code.

<div id="root">  <img src="logo-dark300w.png" alt="Spideren" style="vertical-align: middle; position: absolute;
   top: 50%;
   left: 50%;
   margin-top: -100px; /* Half the height */
   margin-left: -250px; /* Half the width */" />  </div>

Logo will now appear in the middle of the page during the loading process. And will then be replaced after a few seconds by React.

Just want to mention another option here.

You can compute the coefficients using numpy.polyfit(), and feed the coefficients to numpy.poly1d(). This function can construct polynomials using the coefficients, you can find more examples here

https://docs.scipy.org/doc/numpy-1.13.0/reference/generated/numpy.poly1d.html

Let's say, given two data points (-0.3, -0.5) and (0.8, 0.8)

import numpy as np
import matplotlib.pyplot as plt

# compute coefficients
coefficients = np.polyfit([-0.3, 0.8], [-0.5, 0.8], 1) 

# create a polynomial object with the coefficients
polynomial = np.poly1d(coefficients)

# for the line to extend beyond the two points, 
# create the linespace using the min and max of the x_lim
# I'm using -1 and 1 here
x_axis = np.linspace(-1, 1)

# compute the y for each x using the polynomial
y_axis = polynomial(x_axis)

fig = plt.figure()
axes = fig.add_axes([0.1, 0.1, 1, 1])
axes.set_xlim(-1, 1)
axes.set_ylim(-1, 1)
axes.plot(x_axis, y_axis)
axes.plot(-0.3, -0.5, 0.8, 0.8, marker='o', color='red')

Hope it helps.

I tried @PhilNicholas 's code and got the same problem of @its_me said in the comments that search bar show up on the next line of navbar, and I found that form need to be added an attribute width.

<form role="search" style="width: 15em; margin: 0.3em 2em;">
    <div class="input-group">
        <input type="text" class="form-control" placeholder="Search">
        <div class="input-group-btn">
            <button type="submit" class="btn btn-default">
                <span class="glyphicon glyphicon-search"></span>
            </button>
        </div>
    </div>
</form> 

The answer

$scope.$watch('$viewContentLoaded', 
    function() { 
        $timeout(function() {
            //do something
        },0);    
});

is the only one that works in most scenarios I tested. In a sample page with 4 components all of which build HTML from a template, the order of events was

$document ready
$onInit
$postLink
(and these 3 were repeated 3 more times in the same order for the other 3 components)
$viewContentLoaded (repeated 3 more times)
$timeout execution (repeated 3 more times)

So a $document.ready() is useless in most cases since the DOM being constructed in angular may be nowhere near ready.

But more interesting, even after $viewContentLoaded fired, the element of interest still could not be found.

Only after the $timeout executed was it found. Note that even though the $timeout was a value of 0, nearly 200 milliseconds elapsed before it executed, indicating that this thread was held off for quite a while, presumably while the DOM had angular templates added on a main thread. The total time from the first $document.ready() to the last $timeout execution was nearly 500 milliseconds.

In one extraordinary case where the value of a component was set and then the text() value was changed later in the $timeout, the $timeout value had to be increased until it worked (even though the element could be found during the $timeout). Something async within the 3rd party component caused a value to take precedence over the text until sufficient time passed. Another possibility is $scope.$evalAsync, but was not tried.

I am still looking for that one event that tells me the DOM has completely settled down and can be manipulated so that all cases work. So far an arbitrary timeout value is necessary, meaning at best this is a kludge that may not work on a slow browser. I have not tried JQuery options like liveQuery and publish/subscribe which may work, but certainly aren't pure angular.

The attribute packed means that the compiler will not add padding between fields of the struct. Padding is usually used to make fields aligned to their natural size, because some architectures impose penalties for unaligned access or don't allow it at all.

aligned(4) means that the struct should be aligned to an address that is divisible by 4.

Database class that checks if there is any existing database instance it will return previous instance.

   class Database {  
        public static $instance;  
         public static function getInstance(){  
            if(!isset(Database::$instance) ) {  
                Database::$instance = new Database();  
            }  
           return Database::$instance;  
         }  
         private function __cunstruct() {  
           /* private and cant create multiple objects */  
         }  
         public function getQuery(){  
            return "Test Query Data";  
         }  
    }  
    $dbObj = Database::getInstance();  
    $dbObj2 = Database::getInstance();  
    var_dump($dbObj);  
    var_dump($dbObj2);  


/* 
After execution you will get following output: 

object(Database)[1] 
object(Database)[1] 

*/  

Ref http://www.phptechi.com/php-singleton-design-patterns-example.html

Since version 1.2, Django has QuerySet.exists() method which is the most efficient:

if orgs.exists():
    # Do this...
else:
    # Do that...

But if you are going to evaluate QuerySet anyway it's better to use:

if orgs:
   ...

For more information read QuerySet.exists() documentation.

After spending few hours on this i think this is best way to apply pagination. And more importantly it works. This is my paginator code <mat-paginator #paginatoR [length]="length" [pageSize]="pageSize" [pageSizeOptions]="pageSizeOptions">

Inside my component @ViewChild(MatPaginator) paginator: MatPaginator; to view child and finally you have to bind paginator to table dataSource and this is how it is done ngAfterViewInit() {this.dataSource.paginator = this.paginator;} Easy right? if it works for you then mark this as answer.

Note: This may be obsolete for current versions of Amazon Linux 2 since late 2018 (see comments), you can now directly install it via yum install python3.

In Amazon Linux 2, there isn't a python3[4-6] in the default yum repos, instead there's the Amazon Extras Library.

sudo amazon-linux-extras install python3

If you want to set up isolated virtual environments with it; using yum install'd virtualenv tools don't seem to reliably work.

virtualenv --python=python3 my_venv

Calling the venv module/tool is less finicky, and you could double check it's what you want/expect with python3 --version beforehand.

python3 -m venv my_venv

Other things it can install (versions as of 18 Jan 18):

[ec2-user@x ~]$ amazon-linux-extras list
  0  ansible2   disabled  [ =2.4.2 ]
  1  emacs   disabled  [ =25.3 ]
  2  memcached1.5   disabled  [ =1.5.1 ]
  3  nginx1.12   disabled  [ =1.12.2 ]
  4  postgresql9.6   disabled  [ =9.6.6 ]
  5  python3=latest  enabled  [ =3.6.2 ]
  6  redis4.0   disabled  [ =4.0.5 ]
  7  R3.4   disabled  [ =3.4.3 ]
  8  rust1   disabled  [ =1.22.1 ]
  9  vim   disabled  [ =8.0 ]
 10  golang1.9   disabled  [ =1.9.2 ]
 11  ruby2.4   disabled  [ =2.4.2 ]
 12  nano   disabled  [ =2.9.1 ]
 13  php7.2   disabled  [ =7.2.0 ]
 14  lamp-mariadb10.2-php7.2   disabled  [ =10.2.10_7.2.0 ]

dtList  = dtList.Where(s => !string.IsNullOrWhiteSpace(s)).Distinct().ToList()

I assumed empty string and whitespace are like null. If not you can use IsNullOrEmpty (allow whitespace), or s != null

Try to remove the constructor and destructors, it's working for me....

var str = "";
for(var k in obj)
    if (obj.hasOwnProperty(k)) //omit this test if you want to see built-in properties
        str += k + " = " + obj[k] + "\n";
alert(str);

You should use font-size for controlling the height, it is widely supported amongst browsers. And in order to add spacing, you should use padding. Forexample,

.inputField{
  font-size: 30px;
  padding-top: 10px;
  padding-bottom: 10px;
}

This should get you started:

log4j.rootLogger=QuietAppender, LoudAppender, TRACE
# setup A1
log4j.appender.QuietAppender=org.apache.log4j.RollingFileAppender
log4j.appender.QuietAppender.Threshold=INFO
log4j.appender.QuietAppender.File=quiet.log
...


# setup A2
log4j.appender.LoudAppender=org.apache.log4j.RollingFileAppender
log4j.appender.LoudAppender.Threshold=DEBUG
log4j.appender.LoudAppender.File=loud.log
...

log4j.logger.com.yourpackage.yourclazz=TRACE

A source release will be compiled on your own machine while a binary release must match your operating system.

source releases are more common on linux systems because linux systems can dramatically vary in cpu, installed library versions, kernelversions and nearly every linux system has a compiler installed.

binary releases are common on ms-windows systems. most windows machines do not have a compiler installed.

try to set the transparency with the android-studio designer in activity_main.xml. If you want it to be transparent, write it for example like this for white: White: #FFFFFF, with 50% transparency: #80FFFFFF This is for Kotlin tho, not sure if that will work the same way for basic android (java).

For the JS, try

data: {id: the_id}
...
success: function(data) {
        alert('the server returned ' + data;
    }

and

$the_id = intval($_POST['id']);

in PHP

In my case, I could not get the answer by @Sampson to work for me, at best I got a single column centered on the page. In the process however, I learned how the float actually works and created this solution. At it's core the fix is very simple but hard to find as evident by this thread which has had more than 146k views at the time of this post without mention.

All that is needed is to total the amount of screen space width that the desired layout will occupy then make the parent the same width and apply margin:auto. That's it!

The elements in the layout will dictate the width and height of the "outer" div. Take each "myFloat" or element's width or height + its borders + its margins and its paddings and add them all together. Then add the other elements together in the same fashion. This will give you the parent width. They can all be somewhat different sizes and you can do this with fewer or more elements.

Ex.(each element has 2 sides so border, margin and padding get multiplied x2)

So an element that has a width of 10px, border 2px, margin 6px, padding 3px would look like this: 10 + 4 + 12 + 6 = 32

Then add all of your element's totaled widths together.

Element 1 = 32
Element 2 = 24
Element 3 = 32
Element 4 = 24

In this example the width for the "outer" div would be 112.

.outer {_x000D_
  /* floats + margins + borders = 270 */_x000D_
  max-width: 270px;_x000D_
  margin: auto;_x000D_
  height: 80px;_x000D_
  border: 1px;_x000D_
  border-style: solid;_x000D_
}_x000D_
_x000D_
.myFloat {_x000D_
    /* 3 floats x 50px = 150px */_x000D_
    width: 50px;_x000D_
    /* 6 margins x 10px = 60 */_x000D_
    margin: 10px;_x000D_
    /* 6 borders x 10px = 60 */_x000D_
    border: 10px solid #6B6B6B;_x000D_
    float: left;_x000D_
    text-align: center;_x000D_
    height: 40px;_x000D_
}

<div class="outer">_x000D_
  <div class="myFloat">Float 1</div>_x000D_
  <div class="myFloat">Float 2</div>_x000D_
  <div class="myFloat">Float 3</div>_x000D_
</div>

There is another important difference between select and datalist. Here comes the browser support factor.

select is widely supported by browsers compared to datalist. Please take a look at this page for complete browser support of datalist--

Datalist browser support

Where as select is supported in effectively all browsers (since IE6+, Firefox 2+, Chrome 1+ etc)

In MS Windows the temporary directory is set by the environment variable TEMP. In XP, the temporary directory was set per-user as Local Settings\Temp.

If you change your TEMP environment variable to C:\temp, then you get the same when you run :

System.out.println(System.getProperty("java.io.tmpdir"));

Using guava:

List<String> stringList=Lists.transform(list,new Function<Object,String>(){
    @Override
    public String apply(Object arg0) {
        if(arg0!=null)
            return arg0.toString();
        else
            return "null";
    }
});

There is a simple way of passing parameters into runnables. Code:

public void Function(final type variable) {
    Runnable runnable = new Runnable() {
        public void run() {
            //Code adding here...
        }
    };
    new Thread(runnable).start();
}

For others, if clearfix does not solve this for you, add margins to the non-floated sibling that is/are the same as the width(s) of the floated sibling(s).

I am pretty sure this is a duplicate. Anyway, have a look at the following piece of code

x <- seq(5, 15, length=1000)
y <- dnorm(x, mean=10, sd=3)
plot(x, y, type="l", lwd=1)

I'm sure you can work the rest out yourself, for the title you might want to look for something called main= and y-axis labels are also up to you.

If you want to see more of the tails of the distribution, why don't you try playing with the seq(5, 15, ) section? Finally, if you want to know more about what dnorm is doing I suggest you look here

As already mentioned, HTTP itself doesn't impose any hard-coded limit on request length; but browsers have limits ranging on the 2048 character allowed in the GET method.

Use double quotes instead of single quote eg :

where('customer.name', 'LIKE', "%$findcustomer%")

Below is my code:

public function searchCustomer($findcustomer)
{
    $customer = DB::table('customer')
                  ->where('customer.name', 'LIKE', "%$findcustomer%")
                  ->orWhere('customer.phone', 'LIKE', "%$findcustomer%")
                  ->get();

    return View::make("your view here");
}

Please use @CrossOrigin on the backendside in Spring boot controller (either class level or method level) as the solution for Chrome error 'No 'Access-Control-Allow-Origin' header is present on the requested resource.'

This solution is working for me 100% ...

Example : Class level

@CrossOrigin
@Controller
public class UploadController {

----- OR -------

Example : Method level

@CrossOrigin(origins = "http://localhost:3000", maxAge = 3600)
@RequestMapping(value = "/loadAllCars")
    @ResponseBody
    public List<Car> loadAllCars() {


Ref: https://spring.io/blog/2015/06/08/cors-support-in-spring-framework

public async Task<object> PassImageWithText(IFormFile files)
{
    byte[] data;
    string result = "";
    ByteArrayContent bytes;

    MultipartFormDataContent multiForm = new MultipartFormDataContent();

    try
    {
        using (var client = new HttpClient())
        {
            using (var br = new BinaryReader(files.OpenReadStream()))
            {
                data = br.ReadBytes((int)files.OpenReadStream().Length);
            }

            bytes = new ByteArrayContent(data);
            multiForm.Add(bytes, "files", files.FileName);
            multiForm.Add(new StringContent("value1"), "key1");
            multiForm.Add(new StringContent("value2"), "key2");

            var res = await client.PostAsync(_MEDIA_ADD_IMG_URL, multiForm);
        }
    }
    catch (Exception e)
    {
        throw new Exception(e.ToString());
    }

    return result;
}

After messing about with some stuff in cron which wasn't instantly compatible I found that the following approach was nice for debugging:

crontab -e

* * * * * /path/to/prog var1 var2 &>>/tmp/cron_debug_log.log

This will run the task once a minute and you can simply look in the /tmp/cron_debug_log.log file to figure out what is going on.

It is not exactly the "fire job" you might be looking for, but this helped me a lot when debugging a script that didn't work in cron at first.

A "method" is a "subroutine" is a "procedure" is a "function" is a "subprogram" is a ... The same concept goes under many different names, but basically is a named segment of code that you can "call" from some other code. Generally the code is neatly packaged somehow, with a "header" of some sort which gives its name and parameters and a "body" set off by BEGIN & END or { & } or some such.

A "consrtructor" is a special form of method whose purpose is to initialize an instance of a class or structure.

In Java a method's header is <qualifiers> <return type> <method name> ( <parameter type 1> <parameter name 1>, <parameter type 2> <parameter name 2>, ...) <exceptions> and a method body is bracketed by {}.

And you can tell a constructor from other methods because the constructor has the class name for its <method name> and has no declared <return type>.

(In Java, of course, you create a new class instance with the new operator -- new <class name> ( <parameter list> ).)

The way using a Swift Extension to UIImageView (source code here):

Creating Computed Property for Associated UIActivityIndicatorView

import Foundation
import UIKit
import ObjectiveC

private var activityIndicatorAssociationKey: UInt8 = 0

extension UIImageView {
    //Associated Object as Computed Property
    var activityIndicator: UIActivityIndicatorView! {
        get {
            return objc_getAssociatedObject(self, &activityIndicatorAssociationKey) as? UIActivityIndicatorView
        }
        set(newValue) {
            objc_setAssociatedObject(self, &activityIndicatorAssociationKey, newValue, UInt(OBJC_ASSOCIATION_RETAIN))
        }
    }

    private func ensureActivityIndicatorIsAnimating() {
        if (self.activityIndicator == nil) {
            self.activityIndicator = UIActivityIndicatorView(activityIndicatorStyle: UIActivityIndicatorViewStyle.Gray)
            self.activityIndicator.hidesWhenStopped = true
            let size = self.frame.size;
            self.activityIndicator.center = CGPoint(x: size.width/2, y: size.height/2);
            NSOperationQueue.mainQueue().addOperationWithBlock({ () -> Void in
                self.addSubview(self.activityIndicator)
                self.activityIndicator.startAnimating()
            })
        }
    }

Custom Initializer and Setter

    convenience init(URL: NSURL, errorImage: UIImage? = nil) {
        self.init()
        self.setImageFromURL(URL)
    }

    func setImageFromURL(URL: NSURL, errorImage: UIImage? = nil) {
        self.ensureActivityIndicatorIsAnimating()
        let downloadTask = NSURLSession.sharedSession().dataTaskWithURL(URL) {(data, response, error) in
            if (error == nil) {
                NSOperationQueue.mainQueue().addOperationWithBlock({ () -> Void in
                    self.activityIndicator.stopAnimating()
                    self.image = UIImage(data: data)
                })
            }
            else {
                self.image = errorImage
            }
        }
        downloadTask.resume()
    }
}

private void comboBox_Loaded(object sender, RoutedEventArgs e)
{
 Combobox.selectedIndex= your index;
}

OR if you want to display some value after comparing into combobox

 foreach (var item in comboBox.Items)
            {
                if (item.ToString().ToLower().Equals("your item in lower"))
                {
                    comboBox.SelectedValue = item;
                }
            }

I hope it will help, it works for me.

Where is this info kept ("this connection is between computer A and server F")?

A TCP connection is recognized by source IP and port and destination IP and port. Your OS, all intermediate session-aware devices and the server's OS will recognize the connection by this.

HTTP works with request-response: client connects to server, performs a request and gets a response. Without keep-alive, the connection to an HTTP server is closed after each response. With HTTP keep-alive you keep the underlying TCP connection open until certain criteria are met.

This allows for multiple request-response pairs over a single TCP connection, eliminating some of TCP's relatively slow connection startup.

When The IIS (F) sends keep alive header (or user sends keep-alive) , does it mean that (E,C,B) save a connection

No. Routers don't need to remember sessions. In fact, multiple TCP packets belonging to same TCP session need not all go through same routers - that is for TCP to manage. Routers just choose the best IP path and forward packets. Keep-alive is only for client, server and any other intermediate session-aware devices.

which is only for my session ?

Does it mean that no one else can use that connection

That is the intention of TCP connections: it is an end-to-end connection intended for only those two parties.

If so - does it mean that keep alive-header - reduce the number of overlapped connection users ?

Define "overlapped connections". See HTTP persistent connection for some advantages and disadvantages, such as:

• Lower CPU and memory usage (because fewer connections are open simultaneously).
• Enables HTTP pipelining of requests and responses.
• Reduced network congestion (fewer TCP connections).
• Reduced latency in subsequent requests (no handshaking).

if so , for how long does the connection is saved to me ? (in other words , if I set keep alive- "keep" till when?)

An typical keep-alive response looks like this:

Keep-Alive: timeout=15, max=100

See Hypertext Transfer Protocol (HTTP) Keep-Alive Header for example (a draft for HTTP/2 where the keep-alive header is explained in greater detail than both 2616 and 2086):

• A host sets the value of the timeout parameter to the time that the host will allows an idle connection to remain open before it is closed. A connection is idle if no data is sent or received by a host.

• The max parameter indicates the maximum number of requests that a client will make, or that a server will allow to be made on the persistent connection. Once the specified number of requests and responses have been sent, the host that included the parameter could close the connection.

However, the server is free to close the connection after an arbitrary time or number of requests (just as long as it returns the response to the current request). How this is implemented depends on your HTTP server.

if @simon's answer is not working in some of the mac's please follow the below process.

If you have already installed swiftgen using the following commands:

$ brew update $ brew install swiftgen

then follow the steps below in order to run swiftgen with older version.

Step 1: brew uninstall swiftgen Step 2: Navigate to: https://github.com/SwiftGen/SwiftGen/releases and download the swiftgen with version: swiftgen-4.2.0.zip.

Unzip the package in any of the directories.

Step 3: Execute the following in a terminal:

$ mkdir -p ~/dependencies/swiftgen
$ cp -R ~/<your_directory_name>/swiftgen-4.2.0/ ~/dependencies/swiftgen
$ cd /usr/local/bin
$ ln -s ~/dependencies/swiftgen/bin/swiftgen swiftgen
$ mkdir ~/Library/Application\ Support/SwiftGen
$ ln -s ~/dependencies/swiftgen/templates/ ~/Library/Application\ Support/SwiftGen/

$ swiftgen --version

You should get: SwiftGen v0.0 (Stencil v0.8.0, StencilSwiftKit v1.0.0, SwiftGenKit v1.0.1)

ASCII and Unicode are two character encodings. Basically, they are standards on how to represent difference characters in binary so that they can be written, stored, transmitted, and read in digital media. The main difference between the two is in the way they encode the character and the number of bits that they use for each. ASCII originally used seven bits to encode each character. This was later increased to eight with Extended ASCII to address the apparent inadequacy of the original. In contrast, Unicode uses a variable bit encoding program where you can choose between 32, 16, and 8-bit encodings. Using more bits lets you use more characters at the expense of larger files while fewer bits give you a limited choice but you save a lot of space. Using fewer bits (i.e. UTF-8 or ASCII) would probably be best if you are encoding a large document in English.

One of the main reasons why Unicode was the problem arose from the many non-standard extended ASCII programs. Unless you are using the prevalent page, which is used by Microsoft and most other software companies, then you are likely to encounter problems with your characters appearing as boxes. Unicode virtually eliminates this problem as all the character code points were standardized.

Another major advantage of Unicode is that at its maximum it can accommodate a huge number of characters. Because of this, Unicode currently contains most written languages and still has room for even more. This includes typical left-to-right scripts like English and even right-to-left scripts like Arabic. Chinese, Japanese, and the many other variants are also represented within Unicode. So Unicode won’t be replaced anytime soon.

In order to maintain compatibility with the older ASCII, which was already in widespread use at the time, Unicode was designed in such a way that the first eight bits matched that of the most popular ASCII page. So if you open an ASCII encoded file with Unicode, you still get the correct characters encoded in the file. This facilitated the adoption of Unicode as it lessened the impact of adopting a new encoding standard for those who were already using ASCII.

Summary:

1.ASCII uses an 8-bit encoding while Unicode uses a variable bit encoding.
2.Unicode is standardized while ASCII isn’t.
3.Unicode represents most written languages in the world while ASCII does not.
4.ASCII has its equivalent within Unicode.

Taken From: http://www.differencebetween.net/technology/software-technology/difference-between-unicode-and-ascii/#ixzz4zEjnxPhs

I had this problem with an ordinary VB6 program. It turned out that I had omitted a class definition, not a user-defined type. Apparently VB saw something like "Thing.name" and assumed Thing was a UDT. Yes, it's a serious VB6 bug, but you could hardly expect Microsoft to support something they sold sixteen years ago. So what versions of the various products involved are you using? This is only interesting if it occurs with a product that MS supports.

What the hell of all this work anthers

it's too simple

if you want a list of how much productId in each keyword here it's the code

SELECT count(productId),  keyword  FROM `Table_name` GROUP BY keyword; 

I get the simple solution:

 <button id="btn1" onclick="sendData(20)">ClickMe</button>

<script>
   var id; // global variable
   function sendData(valueId){
     id = valueId;
   }
   $("#btn1").click(function(){
        alert(id);
     });
</script>

My mean is that pass the value onclick event to the javascript function sendData(), initialize to the variable and take it by the jquery event handler method.

This is possible since at first sendData(valueid) gets called and initialize the value. Then after jquery event get's executed and use that value.

This is the straight forward solution and For Detail solution go Here.

You need to install the package first.

npm install --save react-fontawesome

OR

npm i --save @fortawesome/react-fontawesome

Don't forget to use className instead of class.

Later on you need to import them in the file where you wanna use them.

import 'font-awesome/css/font-awesome.min.css'

or

import FontAwesomeIcon from '@fortawesome/react-fontawesome'

You are trying to pass pointers (which you do not delete, thus leaking memory) where references are needed. You do not really need pointers here:

Complex firstComplexNumber(81, 93);
Complex secondComplexNumber(31, 19);

cout << "Numarul complex este: " << firstComplexNumber << endl;
//                                  ^^^^^^^^^^^^^^^^^^ No need to dereference now

// ...

Complex::distanta(firstComplexNumber, secondComplexNumber);

You partial looks much like an editor template so you could include it as such (assuming of course that your partial is placed in the ~/views/controllername/EditorTemplates subfolder):

@Html.EditorFor(model => model.SomePropertyOfTypeLocaleBaseModel)

Or if this is not the case simply:

@Html.Partial("nameOfPartial", Model)

You can cut off the milliseconds using a Calendar:

java.util.Date utilDate = new java.util.Date();
Calendar cal = Calendar.getInstance();
cal.setTime(utilDate);
cal.set(Calendar.MILLISECOND, 0);
System.out.println(new java.sql.Timestamp(utilDate.getTime()));
System.out.println(new java.sql.Timestamp(cal.getTimeInMillis()));

Output:

2014-04-04 10:10:17.78
2014-04-04 10:10:17.0

This is what worked for me. Issue is earlier I didn't set Content Type(header) when I used exchange method.

MultiValueMap<String, String> map = new LinkedMultiValueMap<String, String>();
map.add("param1", "123");
map.add("param2", "456");
map.add("param3", "789");
map.add("param4", "123");
map.add("param5", "456");

HttpHeaders headers = new HttpHeaders();
headers.setContentType(MediaType.APPLICATION_FORM_URLENCODED);

final HttpEntity<MultiValueMap<String, String>> entity = new HttpEntity<MultiValueMap<String, String>>(map ,
        headers);
JSONObject jsonObject = null;

try {
    RestTemplate restTemplate = new RestTemplate();
    ResponseEntity<String> responseEntity = restTemplate.exchange(
            "https://url", HttpMethod.POST, entity,
            String.class);

    if (responseEntity.getStatusCode() == HttpStatus.CREATED) {
        try {
            jsonObject = new JSONObject(responseEntity.getBody());
        } catch (JSONException e) {
            throw new RuntimeException("JSONException occurred");
        }
    }
  } catch (final HttpClientErrorException httpClientErrorException) {
        throw new ExternalCallBadRequestException();
  } catch (HttpServerErrorException httpServerErrorException) {
        throw new ExternalCallServerErrorException(httpServerErrorException);
  } catch (Exception exception) {
        throw new ExternalCallServerErrorException(exception);
    } 

ExternalCallBadRequestException and ExternalCallServerErrorException are the custom exceptions here.

Note: Remember HttpClientErrorException is thrown when a 4xx error is received. So if the request you send is wrong either setting header or sending wrong data, you could receive this exception.

want to convert the column name Amount as float number with 2 decimals

CASE WHEN EXISTS (SELECT Amount From InvoiceFee Ifee WHERE IFEE.InvoiceId = 
DIR.InvoiceId AND FeeId = 'Freight Cost')
     THEN  CAST ((SELECT Amount From InvoiceFee Ifee WHERE IFEE.InvoiceId = 
DIR.InvoiceId AND FeeId = 'Freight Cost') AS VARCHAR)
            ELSE '' END AS FCost,

You are looking for --build-arg and the ARG instruction. These are new as of Docker 1.9. Check out https://docs.docker.com/engine/reference/builder/#arg. This will allow you to add ARG arg to the Dockerfile and then build with docker build --build-arg arg=2.3 ..

Reposting my post from How do I remove diacritics (accents) from a string in .NET?

This method works fine in java (purely for the purpose of removing diacritical marks aka accents).

It basically converts all accented characters into their deAccented counterparts followed by their combining diacritics. Now you can use a regex to strip off the diacritics.

import java.text.Normalizer;
import java.util.regex.Pattern;

public String deAccent(String str) {
    String nfdNormalizedString = Normalizer.normalize(str, Normalizer.Form.NFD); 
    Pattern pattern = Pattern.compile("\\p{InCombiningDiacriticalMarks}+");
    return pattern.matcher(nfdNormalizedString).replaceAll("");
}

Little Angular filter if anyone wants it:

angular.module('filters').filter('decimalPlace', function() {
    return function(num, precision) {
        var multiplier = Math.pow(10, precision || 0);
        return Math.round(num * multiplier) / multiplier;
    };
});

use if via:

{{model.value| decimalPlace}}
{{model.value| decimalPlace:1}}
{{model.value| decimalPlace:2}}

:)

Although there isn’t complete agreement on the distinction between the terms parallel and concurrent, many authors make the following distinctions:

• In concurrent computing, a program is one in which multiple tasks can be in progress at any instant.
• In parallel computing, a program is one in which multiple tasks cooperate closely to solve a problem.

So parallel programs are concurrent, but a program such as a multitasking operating system is also concurrent, even when it is run on a machine with only one core, since multiple tasks can be in progress at any instant.

Source: An introduction to parallel programming, Peter Pacheco

You can say getenv('USERNAME')

Using pillow's fromarray, for example:

from PIL import Image
from numpy import *

im = array(Image.open('image.jpg'))
Image.fromarray(im).show()

You have the syntax wrong; there is no need to place a period inside a double-quoted string. Instead, it should be more like

$query = mysql_query("SELECT * FROM table WHERE the_number LIKE '$prefix%'");

You can confirm this by printing out the string to see that it turns out identical to the first case.

Of course it's not a good idea to simply inject variables into the query string like this because of the danger of SQL injection. At the very least you should manually escape the contents of the variable with mysql_real_escape_string, which would make it look perhaps like this:

$sql = sprintf("SELECT * FROM table WHERE the_number LIKE '%s%%'",
               mysql_real_escape_string($prefix));
$query = mysql_query($sql);

Note that inside the first argument of sprintf the percent sign needs to be doubled to end up appearing once in the result.

$timestamp = strtotime('today midnight');

You might want to take a look what PHP has to offer: http://php.net/datetime