This should answer:

How To: Configure MachineKey in ASP.NET 2.0 - Web Farm Deployment Considerations

Web Farm Deployment Considerations

If you deploy your application in a Web farm, you must ensure that the configuration files on each server share the same value for validationKey and decryptionKey, which are used for hashing and decryption respectively. This is required because you cannot guarantee which server will handle successive requests.

With manually generated key values, the settings should be similar to the following example.

<machineKey  
validationKey="21F090935F6E49C2C797F69BBAAD8402ABD2EE0B667A8B44EA7DD4374267A75D7
               AD972A119482D15A4127461DB1DC347C1A63AE5F1CCFAACFF1B72A7F0A281B"       

decryptionKey="ABAA84D7EC4BB56D75D217CECFFB9628809BDB8BF91CFCD64568A145BE59719F"
validation="SHA1"
decryption="AES"
/>

If you want to isolate your application from other applications on the same server, place the in the Web.config file for each application on each server in the farm. Ensure that you use separate key values for each application, but duplicate each application's keys across all servers in the farm.

In short, to set up the machine key refer the following link: Setting Up a Machine Key - Orchard Documentation.

Setting Up the Machine Key Using IIS Manager

If you have access to the IIS management console for the server where Orchard is installed, it is the easiest way to set-up a machine key.

Start the management console and then select the web site. Open the machine key configuration:

The machine key control panel has the following settings:

Uncheck "Automatically generate at runtime" for both the validation key and the decryption key.

Click "Generate Keys" under "Actions" on the right side of the panel.

Click "Apply".

and add the following line to the web.config file in all the webservers under system.web tag if it does not exist.

<machineKey  
    validationKey="21F0SAMPLEKEY9C2C797F69BBAAD8402ABD2EE0B667A8B44EA7DD4374267A75D7
                   AD972A119482D15A4127461DB1DC347C1A63AE5F1CCFAACFF1B72A7F0A281B"           
    decryptionKey="ABAASAMPLEKEY56D75D217CECFFB9628809BDB8BF91CFCD64568A145BE59719F"
    validation="SHA1"
    decryption="AES"
/>

Please make sure that you have a permanent backup of the machine keys and web.config file

Yes, this is a classpath issue. You need to tell the compiler and runtime that the directory where your .class files live is part of the CLASSPATH. The directory that you need to add is the parent of the "com" directory at the start of your package structure.

You do this using the -classpath argument for both javac.exe and java.exe.

Should also ask how the 3rd party classes you're using are packaged. If they're in a JAR, and I'd recommend that you have them in one, you add the .jar file to the classpath:

java -classpath .;company.jar foo.bar.baz.YourClass

Google for "Java classpath". It'll find links like this.

One more thing: "import" isn't loading classes. All it does it save you typing. When you include an import statement, you don't have to use the fully-resolved class name in your code - you can type "Foo" instead of "com.company.thing.Foo". That's all it's doing.

Here's a more valid way which also check if your textbox is filled with only blanks.

// When spaces are not allowed
if (string.IsNullOrWhiteSpace(txtBox1.Text) || string.IsNullOrWhiteSpace(txtBox2.Text))
  //...give error...

// When spaces are allowed
if (string.IsNullOrEmpty(txtBox1.Text) || string.IsNullOrEmpty(txtBox2.Text))
  //...give error...

The edited answer of @Habib.OSU is also fine, this is just another approach.

You need to import PIL (Pillow) for this. Suppose you have an image of size 1200, 1600. We will crop image from 400, 400 to 800, 800

from PIL import Image
img = Image.open("ImageName.jpg")
area = (400, 400, 800, 800)
cropped_img = img.crop(area)
cropped_img.show()

var verifyPaymentType = function () {
   //coloque os checkbox dentro de uma div com a class checkbox
  var inputs =  window.jQuery('.checkbox').find('input');
  var first = inputs.first()[0];

  inputs.on('change', function () {
    this.setCustomValidity('');
  });

  first.setCustomValidity( window.jQuery('.checkbox').find('input:checked').length === 0 ? 'Choose one' : '');
}

window.jQuery('#submit').click(verifyPaymentType);

}

Try this:

body
{
    font-family:your font;
    font-size:your value;
    font-weight:your value;
}

Function.prototype.applyAsync = function(params, cb){
      var function_context = this;
      setTimeout(function(){
          var val = function_context.apply(undefined, params); 
          if(cb) cb(val);
      }, 0);
}

// usage
var double = function(n){return 2*n;};
var display = function(){console.log(arguments); return undefined;};
double.applyAsync([3], display);

Although not fundamentally different than the other solutions, I think my solution does a few additional nice things:

• it allows for parameters to the functions
• it passes the output of the function to the callback
• it is added to Function.prototype allowing a nicer way to call it

Also, the similarity to the built-in function Function.prototype.apply seems appropriate to me.

For my Case in 'Path' variable there was a parameter added like 'C:\ProgramData\Oracle\Java\javapath;'. This location was having java.exe, javaw.exe and javaws.exe from java 8 which is newly installed via jdk.exe from Oracle.

I've removed this text from Path where my Path already having %JAVA_HOME%\bin with it.

Now, the variable 'JAVA_HOME' is controlling my Java version which is I wanted.

IMPORTANT UPDATE:

Due to use of only application/msword, application/vnd.ms-excel, application/vnd.ms-powerpoint... allows only till 2003 MS products, and not newest. I've found this:

application/msword, application/vnd.openxmlformats-officedocument.wordprocessingml.document, application/vnd.ms-powerpoint, application/vnd.openxmlformats-officedocument.presentationml.slideshow, application/vnd.openxmlformats-officedocument.presentationml.presentation

And that includes the new ones. For other files, you can retrieve the MIME TYPE in your file by this way (pardon the lang)(in MIME list types, there aren't this ones):

You can select & copy the type of content

I prefer (a != null) so that the syntax matches reference types.

You can loop through the select_obj.options. There's a #text method in each of the option object, which you can use to compare to what you want and set the selectedIndex of the select_obj.

if you want to get json properties value in string format use the following way

var i = {"x":1}

var j = JSON.stringify(i.x);

var k = JSON.stringify(i);

console.log(j);

"1"

console.log(k);

'{"x":1}'

Filter() from the base package is the perfect function for that use-case: You simply have to code:

Filter(is.numeric, x)

It is also much faster than select_if():

library(microbenchmark)
microbenchmark(
    dplyr::select_if(mtcars, is.numeric),
    Filter(is.numeric, mtcars)
)

returns (on my computer) a median of 60 microseconds for Filter, and 21 000 microseconds for select_if (350x faster).

 public interface IService { 

  String BASE_URL = "https://api.demo.com/";

  @GET("Login") //i.e https://api.demo.com/Search? 
  Call<Products> getUserDetails(@Query("email") String emailID, @Query("password") String password)

} 

It will be called this way. Considering you did the rest of the code already.

Call<Results> call = service.getUserDetails("[email protected]", "Password@123");

For example when a query is returned, it will look like this.

https://api.demo.com/[email protected]&password=Password@123

What about detached or unrelated shells and code [args] support?

While other answers talk about how to configure and use the VScode integrated WSL bash terminal support, they don't solve the problem of "detached shells": shells which were not launched from within VScode, or which somehow get "disconnected" from the VScode server instance associated with the IDE.

Such shells can give errors like:

Command is only available in WSL or inside a Visual Studio Code terminal.

or...

Unable to connect to VS Code server. Error in request

Here's a script which makes it easy to solve this problem.

I use this daily to connect shells in a tmux session with a specific VScode server instance, or to fix an integrated shell that's become detached from its hosting IDE.

#!/bin/bash
# codesrv-connect
#
#  Purpose:
#     Copies the vscode connection environment from one shell to another, so that you can use the
#     vscode integrated terminal's "code [args]" command to communicate with that instance of vscode
#     from an unrelated shell.
#
#  Usage:
#    1.  Open an integrated terminal in vscode, and run codesrv-connect
#    2.  In the target shell, cd to the same directory and run
#       ". .codesrv-connect", or follow the instruction printed by codesrv-connect.
#
#  Setup:
#    Put "codesrv-connect somewhere on your PATH (e.g. ~/bin)"
#
#  Cleanup:
#    - Delete abandoned .codesrv-connect files when their vscode sessions die.
#    - Do not add .codesrv-connect files to git repositories.
#
#  Notes:
#     The VSCODE_IPC_HOOK_CLI environment variable points to a socket which is rather volatile, while the long path for the 'code' alias is more stable: vscode doesn't change the latter even across a "code -r ." reload.  But the former is easily detached and so you need a fresh value if that happens.  This is what codesrv-connect does: it captures the value of these two and writes them to .codesrv-connect in the current dir.
#
#   Verinfo: v1.0.0 - [email protected] - 2020-03-31
#

function errExit {
    echo "ERROR: $@" >&2
    exit 1
}

[[ -S $VSCODE_IPC_HOOK_CLI ]] || errExit "VSCODE_IPC_HOOK_CLI not defined or not a pipe [$VSCODE_IPC_HOOK_CLI]"
if [[ $(which code) != *vscode-server* ]]; then
    errExit "The 'code' command doesn't refer to something under .vscode-server: $(type -a code)"
fi
cat <<EOF >.codesrv-connect
# Temp file created by $(which codesrv-connect): source this into your working shell like '. .codesrv-connect'
# ( git hint: add ".codesrv-connect" to .gitignore )
#
cd "$PWD"
if ! test -S "$VSCODE_IPC_HOOK_CLI"; then
    echo "ERROR: $VSCODE_IPC_HOOK_CLI not a socket. Dead session."
else
    export VSCODE_IPC_HOOK_CLI="$VSCODE_IPC_HOOK_CLI"
    alias code=$(which code)
    echo "Done: the 'code' command will talk to socket \"$VSCODE_IPC_HOOK_CLI\" now."
    echo "You can delete .codesrv-connect when the vscode server context dies, or reuse it in other shells until then."
fi
EOF

echo "# OK: run this to connect to vscode server in a destination shell:"
echo ". $PWD/.codesrv-connect"

you should be searching about how to add favicon.ico . You can try adding favicon.ico directly in your html pages like this

<link rel="shortcut icon" href="/favicon.png" type="image/png">
<link rel="shortcut icon" type="image/png" href="http://www.example.com/favicon.png" />

Or you can update that in your webserver. It is advised to add in your webserver as you don't need to add this in each of your html pages (assuming no includes).

To add in your apache place the favicon.ico in your root website director and add this in httpd.conf

AddType image/x-icon .ico

My answer is similar to this one on ServerFault.com.

To Be Conservative

If you want to be more conservative than granting "all privileges", you might want to try something more like these.

GRANT SELECT, INSERT, UPDATE, DELETE ON ALL TABLES IN SCHEMA public TO some_user_;
GRANT EXECUTE ON ALL FUNCTIONS IN SCHEMA public TO some_user_;

The use of public there refers to the name of the default schema created for every new database/catalog. Replace with your own name if you created a schema.

Access to the Schema

To access a schema at all, for any action, the user must be granted "usage" rights. Before a user can select, insert, update, or delete, a user must first be granted "usage" to a schema.

You will not notice this requirement when first using Postgres. By default every database has a first schema named public. And every user by default has been automatically been granted "usage" rights to that particular schema. When adding additional schema, then you must explicitly grant usage rights.

GRANT USAGE ON SCHEMA some_schema_ TO some_user_ ;

Excerpt from the Postgres doc:

For schemas, allows access to objects contained in the specified schema (assuming that the objects' own privilege requirements are also met). Essentially this allows the grantee to "look up" objects within the schema. Without this permission, it is still possible to see the object names, e.g. by querying the system tables. Also, after revoking this permission, existing backends might have statements that have previously performed this lookup, so this is not a completely secure way to prevent object access.

For more discussion see the Question, What GRANT USAGE ON SCHEMA exactly do?. Pay special attention to the Answer by Postgres expert Craig Ringer.

Existing Objects Versus Future

These commands only affect existing objects. Tables and such you create in the future get default privileges until you re-execute those lines above. See the other answer by Erwin Brandstetter to change the defaults thereby affecting future objects.

I found this question when I was looking for the answer to the above question. But in my case the issue was the use of an 'en dash' rather than a 'dash'. Check which dash you are using, it might be the wrong one. I hope this answer speeds up someone else's search, a comment like this could have saved me a bit of time.

Here's an easier way:

sudo apt-get install maven

More details are here.

Try:

.bottom {
    position: fixed;
    bottom: 0;
}

Assume a dataframe with 19 rows

index=range(0,19)
index

columns=['A']
test = pd.DataFrame(index=index, columns=columns)

Keeping Column A as a constant

test['A']=10

Keeping column b as a variable given by a loop

for x in range(0,19):
    test.loc[[x], 'b'] = pd.Series([x], index = [x])

You can replace the first x in pd.Series([x], index = [x]) with any value

Reason is , {} is the syntax of .format() so in your case .format() doesn't recognize {Hello} so it threw an error.

you can override it by using double curly braces {{}},

x = " {{ Hello }} {0} "

or

try %s for text formatting,

x = " { Hello } %s"
print x%(42)  

Some of the suggested methods are basing on system objects (for example on the 'sys.objects'). They are assuming these system objects contain enough records to generate our numbers.

I would not base on anything which does not belong to my application and over which I do not have full control. For example: the content of these sys tables may change, the tables may not be valid anymore in new version of SQL etc.

As a solution, we can create our own table with records. We then use that one instead these system related objects (table with all numbers should be fine if we know the range in advance otherwise we could go for the one to do the cross join on).

The CTE based solution is working fine but it has limits related to the nested loops.

As one of comments:

db.collection.find().sort({age:-1}).limit(1) // for MAX
db.collection.find().sort({age:+1}).limit(1) // for MIN

it's completely usable but i'm not sure about performance

Stream is just an abstraction (or a wrapper) over a physical stream of bytes. This physical stream is called the base stream. So there is always a base stream over which a stream wrapper is created and thus the wrapper is named after the base stream type ie FileStream, MemoryStream etc.

The advantage of the stream wrapper is that you get a unified api to interact with streams of any underlying type usb, file etc.

Why would you treat data as stream - because data chunks are loaded on-demand, we can inspect/process the data as chunks rather than loading the entire data into memory. This is how most of the programs deal with big files, for eg encrypting an OS image file.

Run this from the branch where you want the file to end up:

git checkout otherbranch myfile.txt

General formulas:

git checkout <commit_hash> <relative_path_to_file_or_dir>
git checkout <remote_name>/<branch_name> <file_or_dir>

Some notes (from comments):

• Using the commit hash you can pull files from any commit
• This works for files and directories
• overwrites the file myfile.txt and mydir
• Wildcards don't work, but relative paths do
• Multiple paths can be specified

an alternative:

git show commit_id:path/to/file > path/to/file

Since inplace argument is available, you don't need to copy and assign the original data frame back to itself, but do as follows:

df.rename(columns={'two':'new_name'}, inplace=True)

I also met this problem when I've made ListView for android app:

Map<String, Object> m;

for(int i=0; i < dates.length; i++){
    m = new HashMap<String, Object>();
    m.put(ATTR_DATES, dates[i]);
    m.put(ATTR_SQUATS, squats[i]);
    m.put(ATTR_BP, benchpress[i]);
    m.put(ATTR_ROW, row[i]);
    data.add(m);
}

The problem was that I've forgotten to use the [i] index inside the loop

It's important to understand what the = operator in JavaScript does and does not do.

The = operator does not make a copy of the data.

The = operator creates a new reference to the same data.

After you run your original code:

var a = $('#some_hidden_var').val(),
    b = a;

a and b are now two different names for the same object.

Any change you make to the contents of this object will be seen identically whether you reference it through the a variable or the b variable. They are the same object.

So, when you later try to "revert" b to the original a object with this code:

b = a;

The code actually does nothing at all, because a and b are the exact same thing. The code is the same as if you'd written:

b = b;

which obviously won't do anything.

Why does your new code work?

b = { key1: a.key1, key2: a.key2 };

Here you are creating a brand new object with the {...} object literal. This new object is not the same as your old object. So you are now setting b as a reference to this new object, which does what you want.

To handle any arbitrary object, you can use an object cloning function such as the one listed in Armand's answer, or since you're using jQuery just use the $.extend() function. This function will make either a shallow copy or a deep copy of an object. (Don't confuse this with the $().clone() method which is for copying DOM elements, not objects.)

For a shallow copy:

b = $.extend( {}, a );

Or a deep copy:

b = $.extend( true, {}, a );

What's the difference between a shallow copy and a deep copy? A shallow copy is similar to your code that creates a new object with an object literal. It creates a new top-level object containing references to the same properties as the original object.

If your object contains only primitive types like numbers and strings, a deep copy and shallow copy will do exactly the same thing. But if your object contains other objects or arrays nested inside it, then a shallow copy doesn't copy those nested objects, it merely creates references to them. So you could have the same problem with nested objects that you had with your top-level object. For example, given this object:

var obj = {
    w: 123,
    x: {
        y: 456,
        z: 789
    }
};

If you do a shallow copy of that object, then the x property of your new object is the same x object from the original:

var copy = $.extend( {}, obj );
copy.w = 321;
copy.x.y = 654;

Now your objects will look like this:

// copy looks as expected
var copy = {
    w: 321,
    x: {
        y: 654,
        z: 789
    }
};

// But changing copy.x.y also changed obj.x.y!
var obj = {
    w: 123,  // changing copy.w didn't affect obj.w
    x: {
        y: 654,  // changing copy.x.y also changed obj.x.y
        z: 789
    }
};

You can avoid this with a deep copy. The deep copy recurses into every nested object and array (and Date in Armand's code) to make copies of those objects in the same way it made a copy of the top-level object. So changing copy.x.y wouldn't affect obj.x.y.

Short answer: If in doubt, you probably want a deep copy.

from os.path import dirname, join as pjoin
import scipy.io as sio
data_dir = pjoin(dirname(sio.__file__), 'matlab', 'tests', 'data')
mat_fname = pjoin(data_dir, 'testdouble_7.4_GLNX86.mat')
mat_contents = sio.loadmat(mat_fname)

You can use above code to read the default saved .mat file in Python.

Here is a ridiculously brute force answer:

I modified the gradlew script. Here is my new exec command at the end of the file in the

exec "$JAVACMD" "${JVM_OPTS[@]}" -classpath "$CLASSPATH" org.gradle.wrapper.GradleWrapperMain "$@" **| grep -v "libpng warning:"**

The purpose of interfaces is abstraction, or decoupling from implementation.

If you introduce an abstraction in your program, you don't care about the possible implementations. You are interested in what it can do and not how, and you use an interface to express this in Java.

The fact that you're getting an error from the Names Pipes Provider tells us that you're not using the TCP/IP protocol when you're trying to establish the connection. Try adding the "tcp" prefix and specifying the port number:

tcp:name.cloudapp.net,1433

If you are trying to "Submit and Reset" the the "form" with one Button click, Try this!

Here I have used jQuery function, it can be done by simple JavaScript also...

        <form id="form_data">
           <input type="anything"  name="anything" />
           <input type="anything"  name="anything" />

             <!-- Save and Reset button -->
           <button type="button" id="btn_submit">Save</button>
           <button type="reset" id="btn_reset" style="display: none;"></button>
        </form>

<script type="text/javascript">
$(function(){
    $('#btn_submit').click(function(){
        // Do what ever you want
       $('#btn_reset').click();  // Clicking reset button
    });
});
</script>

I don't think the order can be guaranteed, otherwise it would be easy enough to slice the second half of Object.entries result and map from there.

The only (very minor) issues with the answers above is that

• there is a lot of unnecessary type conversion between string and number.
• the entries are iterated twice when a single iteration is just as clean and effective.

type StandardEnum = { [id: string]: number | string; [nu: number]: string;}

function enumToList<T extends StandardEnum> (enm: T) : { id: number; description: string }[] {
    return Object.entries(enm).reduce((accum, kv) => {
        if (typeof kv[1] === 'number') {
            accum.push({ id: kv[1], description: kv[0] })
        }
        return accum
    }, []) // if enum is huge, perhaps pre-allocate with new Array(entries.length / 2), however then push won't work, so tracking an index would also be required
}

float and double don't store decimal places. They store binary places: float is (assuming IEEE 754) 24 significant bits (7.22 decimal digits) and double is 53 significant bits (15.95 significant digits).

Converting from double to float will give you the closest possible float, so rounding won't help you. Goining the other way may give you "noise" digits in the decimal representation.

#include <stdio.h>

int main(void) {
    double orig = 12345.67;
    float f = (float) orig;
    printf("%.17g\n", f); // prints 12345.669921875
    return 0;
}

To get a double approximation to the nice decimal value you intended, you can write something like:

double round_to_decimal(float f) {
    char buf[42];
    sprintf(buf, "%.7g", f); // round to 7 decimal digits
    return atof(buf);
}

The scope <scope>provided</scope> gives you an opportunity to tell that the jar would be available at runtime, so do not bundle it. It does not mean that you do not need it at compile time, hence maven would try to download that.

Now I think, the below maven artifact do not exist at all. I tries searching google, but not able to find. Hence you are getting this issue.

Change groupId to <groupId>net.sourceforge.ant4x</groupId> to get the latest jar.

<dependency>
  <groupId>net.sourceforge.ant4x</groupId>
  <artifactId>ant4x</artifactId>
  <version>${net.sourceforge.ant4x-version}</version>
  <scope>provided</scope>
</dependency>

Another solution for this problem is:

1. Run your own maven repo.
2. download the jar
3. Install the jar into the repository.
4. Add a code in your pom.xml something like:

Where http://localhost/repo is your local repo URL:

<repositories>
    <repository>
        <id>wmc-central</id>
        <url>http://localhost/repo</url>
    </repository>
    <-- Other repository config ... -->
</repositories>

You can add any paths you want to the hashtable of your bash:

hash -d <CustomName>=<RealPath>

Now you will be able to cd ~<CustomName>. To make it permanent add it to your bashrc script.

Notice that this hashtable is meant to provide a cache for bash not to need to search for content everytime a command is executed, therefore this table will be cleared on events that invalidate the cache, e.g. modifying $PATH.

In my case the issue was that Virtual directory was not created.

1. Right click on web project file and go to properties
2. Navigate to Web
3. Scroll down to Project Url
4. Click Create Virtual Directory button to create virtual directory

I had the same problem. the other answers are correct but there is another solution. you can set response header to allow cross-origin access. according to this post you have to add the following codes before any app.get call:

app.use(function(req, res, next) {
  res.header("Access-Control-Allow-Origin", "*");
  res.header("Access-Control-Allow-Headers", "X-Requested-With");
  next();
  });

this worked for me :)

Sometimes matplotlib requires range(len(y)), e.g., while y=array([1,2,5,6]), plot(y) works fine, scatter(y) does not. One has to write scatter(range(len(y)),y). (Personally, I think this is a bug in scatter; plot and its friends scatter and stem should use the same calling sequences as much as possible.)

I solved my problem with adding these in build gradle:

   defaultConfig {
   multiDexEnabled true


 dependencies {
 compile 'com.android.support:multidex:1.0.0'

another solution can be removing unnecessary libraries

Just a follow up to @mary. But because I don't have enough rep, couldn't post this as a comment to that post. Anyways, here is what I used:

isnum() { awk -v a="$1" 'BEGIN {print (a == a + 0)}'; }

The function will return "1" if the argument is a number, otherwise will return "0". This works for integers as well as floats. Usage is something like:

n=-2.05e+07
res=`isnum "$n"`
if [ "$res" == "1" ]; then
     echo "$n is a number"
else
     echo "$n is not a number"
fi

You can get your package name like so:

$ /path/to/adb shell 'pm list packages -f myapp'
package:/data/app/mycompany.myapp-2.apk=mycompany.myapp

Here are the options:

$ adb
Android Debug Bridge version 1.0.32
Revision 09a0d98bebce-android

 -a                            - directs adb to listen on all interfaces for a connection
 -d                            - directs command to the only connected USB device
                                 returns an error if more than one USB device is present.
 -e                            - directs command to the only running emulator.
                                 returns an error if more than one emulator is running.
 -s <specific device>          - directs command to the device or emulator with the given
                                 serial number or qualifier. Overrides ANDROID_SERIAL
                                 environment variable.
 -p <product name or path>     - simple product name like 'sooner', or
                                 a relative/absolute path to a product
                                 out directory like 'out/target/product/sooner'.
                                 If -p is not specified, the ANDROID_PRODUCT_OUT
                                 environment variable is used, which must
                                 be an absolute path.
 -H                            - Name of adb server host (default: localhost)
 -P                            - Port of adb server (default: 5037)
 devices [-l]                  - list all connected devices
                                 ('-l' will also list device qualifiers)
 connect <host>[:<port>]       - connect to a device via TCP/IP
                                 Port 5555 is used by default if no port number is specified.
 disconnect [<host>[:<port>]]  - disconnect from a TCP/IP device.
                                 Port 5555 is used by default if no port number is specified.
                                 Using this command with no additional arguments
                                 will disconnect from all connected TCP/IP devices.

device commands:
  adb push [-p] <local> <remote>
                               - copy file/dir to device
                                 ('-p' to display the transfer progress)
  adb pull [-p] [-a] <remote> [<local>]
                               - copy file/dir from device
                                 ('-p' to display the transfer progress)
                                 ('-a' means copy timestamp and mode)
  adb sync [ <directory> ]     - copy host->device only if changed
                                 (-l means list but don't copy)
  adb shell                    - run remote shell interactively
  adb shell <command>          - run remote shell command
  adb emu <command>            - run emulator console command
  adb logcat [ <filter-spec> ] - View device log
  adb forward --list           - list all forward socket connections.
                                 the format is a list of lines with the following format:
                                    <serial> " " <local> " " <remote> "\n"
  adb forward <local> <remote> - forward socket connections
                                 forward specs are one of:
                                   tcp:<port>
                                   localabstract:<unix domain socket name>
                                   localreserved:<unix domain socket name>
                                   localfilesystem:<unix domain socket name>
                                   dev:<character device name>
                                   jdwp:<process pid> (remote only)
  adb forward --no-rebind <local> <remote>
                               - same as 'adb forward <local> <remote>' but fails
                                 if <local> is already forwarded
  adb forward --remove <local> - remove a specific forward socket connection
  adb forward --remove-all     - remove all forward socket connections
  adb reverse --list           - list all reverse socket connections from device
  adb reverse <remote> <local> - reverse socket connections
                                 reverse specs are one of:
                                   tcp:<port>
                                   localabstract:<unix domain socket name>
                                   localreserved:<unix domain socket name>
                                   localfilesystem:<unix domain socket name>
  adb reverse --norebind <remote> <local>
                               - same as 'adb reverse <remote> <local>' but fails
                                 if <remote> is already reversed.
  adb reverse --remove <remote>
                               - remove a specific reversed socket connection
  adb reverse --remove-all     - remove all reversed socket connections from device
  adb jdwp                     - list PIDs of processes hosting a JDWP transport
  adb install [-lrtsdg] <file>
                               - push this package file to the device and install it
                                 (-l: forward lock application)
                                 (-r: replace existing application)
                                 (-t: allow test packages)
                                 (-s: install application on sdcard)
                                 (-d: allow version code downgrade)
                                 (-g: grant all runtime permissions)
  adb install-multiple [-lrtsdpg] <file...>
                               - push this package file to the device and install it
                                 (-l: forward lock application)
                                 (-r: replace existing application)
                                 (-t: allow test packages)
                                 (-s: install application on sdcard)
                                 (-d: allow version code downgrade)
                                 (-p: partial application install)
                                 (-g: grant all runtime permissions)
  adb uninstall [-k] <package> - remove this app package from the device
                                 ('-k' means keep the data and cache directories)
  adb bugreport                - return all information from the device
                                 that should be included in a bug report.

  adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
                               - write an archive of the device's data to <file>.
                                 If no -f option is supplied then the data is written
                                 to "backup.ab" in the current directory.
                                 (-apk|-noapk enable/disable backup of the .apks themselves
                                    in the archive; the default is noapk.)
                                 (-obb|-noobb enable/disable backup of any installed apk expansion
                                    (aka .obb) files associated with each application; the default
                                    is noobb.)
                                 (-shared|-noshared enable/disable backup of the device's
                                    shared storage / SD card contents; the default is noshared.)
                                 (-all means to back up all installed applications)
                                 (-system|-nosystem toggles whether -all automatically includes
                                    system applications; the default is to include system apps)
                                 (<packages...> is the list of applications to be backed up.  If
                                    the -all or -shared flags are passed, then the package
                                    list is optional.  Applications explicitly given on the
                                    command line will be included even if -nosystem would
                                    ordinarily cause them to be omitted.)

  adb restore <file>           - restore device contents from the <file> backup archive

  adb disable-verity           - disable dm-verity checking on USERDEBUG builds
  adb enable-verity            - re-enable dm-verity checking on USERDEBUG builds
  adb keygen <file>            - generate adb public/private key. The private key is stored in <file>,
                                 and the public key is stored in <file>.pub. Any existing files
                                 are overwritten.
  adb help                     - show this help message
  adb version                  - show version num

scripting:
  adb wait-for-device          - block until device is online
  adb start-server             - ensure that there is a server running
  adb kill-server              - kill the server if it is running
  adb get-state                - prints: offline | bootloader | device
  adb get-serialno             - prints: <serial-number>
  adb get-devpath              - prints: <device-path>
  adb remount                  - remounts the /system, /vendor (if present) and /oem (if present) partitions on the device read-write
  adb reboot [bootloader|recovery]
                               - reboots the device, optionally into the bootloader or recovery program.
  adb reboot sideload          - reboots the device into the sideload mode in recovery program (adb root required).
  adb reboot sideload-auto-reboot
                               - reboots into the sideload mode, then reboots automatically after the sideload regardless of the result.
  adb sideload <file>          - sideloads the given package
  adb root                     - restarts the adbd daemon with root permissions
  adb unroot                   - restarts the adbd daemon without root permissions
  adb usb                      - restarts the adbd daemon listening on USB
  adb tcpip <port>             - restarts the adbd daemon listening on TCP on the specified port

networking:
  adb ppp <tty> [parameters]   - Run PPP over USB.
 Note: you should not automatically start a PPP connection.
 <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
 [parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ]
  <localdir> can be interpreted in several ways:

  - If <directory> is not specified, /system, /vendor (if present), /oem (if present) and /data partitions will be updated.

  - If it is "system", "vendor", "oem" or "data", only the corresponding partition
    is updated.

environment variables:
  ADB_TRACE                    - Print debug information. A comma separated list of the following values
                                 1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
  ANDROID_SERIAL               - The serial number to connect to. -s takes priority over this if given.
  ANDROID_LOG_TAGS             - When used with the logcat option, only these debug tags are printed.

Clear the form as follows

document.forms[0].reset();

You can simply clear the form elements within the group. by using this forms[0].

If you specifically want the Content-Type, there's a special cURL option to retrieve it:

$ch = curl_init($url);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
$response = curl_exec($ch);
$content_type = curl_getinfo($ch, CURLINFO_CONTENT_TYPE);

the different way to disable test tasks in the project is:

tasks.withType(Test) {enabled = false}

this behavior needed sometimes if you want to disable tests in one of a project(or the group of projects).

This way working for the all kind of test task, not just a java 'tests'. Also, this way is safe. Here's what I mean let's say: you have a set of projects in different languages: if we try to add this kind of record in main build.gradle:

 subprojects{
 .......
 tests.enabled=false
 .......
}

we will fail in a project when if we have no task called tests

I use the lattice package for almost everything I plot in R and it has a corresponing plot to persp called wireframe. Let data be the way Sven defined it.

wireframe(z ~ x * y, data=data)

Or how about this (modification of fig 6.3 in Deepanyan Sarkar's book):

p <- wireframe(z ~ x * y, data=data)
npanel <- c(4, 2)
rotx <- c(-50, -80)
rotz <- seq(30, 300, length = npanel[1]+1)
update(p[rep(1, prod(npanel))], layout = npanel,
    panel = function(..., screen) {
        panel.wireframe(..., screen = list(z = rotz[current.column()],
                                           x = rotx[current.row()]))
    })

Update: Plotting surfaces with OpenGL

Since this post continues to draw attention I want to add the OpenGL way to make 3-d plots too (as suggested by @tucson below). First we need to reformat the dataset from xyz-tripplets to axis vectors x and y and a matrix z.

x <- 1:5/10
y <- 1:5
z <- x %o% y
z <- z + .2*z*runif(25) - .1*z

library(rgl)
persp3d(x, y, z, col="skyblue")

This image can be freely rotated and scaled using the mouse, or modified with additional commands, and when you are happy with it you save it using rgl.snapshot.

rgl.snapshot("myplot.png")

1:n means 'one-to-many'; you have two tables, and each row of table A may be referenced by any number of rows in table B, but each row in table B can only reference one row in table A (or none at all).

n:m (or n:n) means 'many-to-many'; each row in table A can reference many rows in table B, and each row in table B can reference many rows in table A.

A 1:n relationship is typically modelled using a simple foreign key - one column in table A references a similar column in table B, typically the primary key. Since the primary key uniquely identifies exactly one row, this row can be referenced by many rows in table A, but each row in table A can only reference one row in table B.

A n:m relationship cannot be done this way; a common solution is to use a link table that contains two foreign key columns, one for each table it links. For each reference between table A and table B, one row is inserted into the link table, containing the IDs of the corresponding rows.

Unfortunately, vars files do not have include statements.

You can either put all the vars into the definitions dictionary, or add the variables as another dictionary in the same file.

If you don't want to have them in the same file, you can include them at the playbook level by adding the vars file at the start of the play:

---
- hosts: myhosts

  vars_files:
    - default_step.yml

or in a task:

---
- hosts: myhosts

  tasks:
    - name: include default step variables
      include_vars: default_step.yml

I found Maven Integration for Eclipse here.

http://download.eclipse.org/technology/m2e/releases

After installing restart eclipse. Worked for me running Eclipse Juno.

If you are using docker to deploy the spring boot app, you can set the profile using the flag e:

docker run -e "SPRING_PROFILES_ACTIVE=prod" -p 8080:8080 -t r.test.co/myapp:latest

Declaring an enum variable is done like this:

enum strategy {RANDOM, IMMEDIATE, SEARCH};
enum strategy my_strategy = IMMEDIATE;

However, you can use a typedef to shorten the variable declarations, like so:

typedef enum {RANDOM, IMMEDIATE, SEARCH} strategy;
strategy my_strategy = IMMEDIATE;

Having a naming convention to distinguish between types and variables is a good idea:

typedef enum {RANDOM, IMMEDIATE, SEARCH} strategy_type;
strategy_type my_strategy = IMMEDIATE;

tail -f logfile | grep org.springframework | cut -c 900-

would remove the first 900 characters

cut uses 900- to show the 900th character to the end of the line

however when I pipe all of this through grep I don't get anything

Enabling the legacy from app.config didn't work for me. For unknown reasons, my application wasn't activating V2 runtime policy. I found a work around here.

Enabling the legacy from app.config is a recommended approach but in some cases it doesn't work as expected. Use the following code with in your main application to force Legacy V2 policy:

public static class RuntimePolicyHelper
{
public static bool LegacyV2RuntimeEnabledSuccessfully { get; private set; }

static RuntimePolicyHelper()
{
    ICLRRuntimeInfo clrRuntimeInfo =
        (ICLRRuntimeInfo)RuntimeEnvironment.GetRuntimeInterfaceAsObject(
            Guid.Empty, 
            typeof(ICLRRuntimeInfo).GUID);
    try
    {
        clrRuntimeInfo.BindAsLegacyV2Runtime();
        LegacyV2RuntimeEnabledSuccessfully = true;
    }
    catch (COMException)
    {
        // This occurs with an HRESULT meaning 
        // "A different runtime was already bound to the legacy CLR version 2 activation policy."
        LegacyV2RuntimeEnabledSuccessfully = false;
    }
}

[ComImport]
[InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
[Guid("BD39D1D2-BA2F-486A-89B0-B4B0CB466891")]
private interface ICLRRuntimeInfo
{
    void xGetVersionString();
    void xGetRuntimeDirectory();
    void xIsLoaded();
    void xIsLoadable();
    void xLoadErrorString();
    void xLoadLibrary();
    void xGetProcAddress();
    void xGetInterface();
    void xSetDefaultStartupFlags();
    void xGetDefaultStartupFlags();

    [MethodImpl(MethodImplOptions.InternalCall, MethodCodeType = MethodCodeType.Runtime)]
    void BindAsLegacyV2Runtime();
}
}

conio.h is a C header file used in old MS-DOS compilers to create text user interfaces. Compilers that targeted non-DOS operating systems, such as Linux, Win32 and OS/2, provided different implementations of these functions.

The #include <curses.h> will give you almost all the functionalities that was provided in conio.h

nucurses need to be installed at the first place

In deb based Distros use

sudo apt-get install libncurses5-dev libncursesw5-dev

And in rpm based distros use

sudo yum install ncurses-devel ncurses

For getch() class of functions, you can try this

yourTextView.setGravity(Gravity.CENTER);

I also had the same errors with fontawesome's fonts. Then I downloaded the lastest fontawesome's fonts and replace to the old fonts. And the errors are gone.

You could simply use Runtime.exec()

you should use only english version of phpmyadmin if you are using all languages you should enable all languages mbstring in php.in file.....just search for mbstring in php.in

I'm not sure if this is what you had in mind, but I ended up on this question because I was unable to install node_modules inside my project dir as it was mounted on a filesystem that did not support symlinks (a VM "shared" folder).

I found the following workaround:

1. Copy the package.json file to a temp folder on a different filesystem
2. Run npm install there
3. Copy the resulting node_modules directory back into the project dir, using cp -r --dereference to expand symlinks into copies.

I hope this helps someone else who ends up on this question when looking for a way to move node_modules to a different filesystem.

Other options

There is another workaround, which I found on the github issue that @Charminbear linked to, but this doesn't work with grunt because it does not support NODE_PATH as per https://github.com/browserify/resolve/issues/136:

lets say you have /media/sf_shared and you can't install symlinks in there, which means you can't actually npm install from /media/sf_shared/myproject because some modules use symlinks.

• $ mkdir /home/dan/myproject && cd /home/dan/myproject
• $ ln -s /media/sf_shared/myproject/package.json (you can symlink in this direction, just can't create one inside of /media/sf_shared)
• $ npm install
• $ cd /media/sf_shared/myproject
• $ NODE_PATH=/home/dan/myproject/node_modules node index.js

You can find more information directly on this link: http://datatables.net/examples/basic_init/filter_only.html

$(document).ready(function() {
$('#example').dataTable({
    "bPaginate": false,
    "bLengthChange": false,
    "bFilter": true,
    "bInfo": false,
    "bAutoWidth": false });
});

Hope that helps !

EDIT : If you are lazy, "bLengthChange": false, is the one you need to change :)

There are two ways to write case statements, you seem to be using a combination of the two

case a.updatedDate
    when 1760 then 'Entered on' + a.updatedDate
    when 1710 then 'Viewed on' + a.updatedDate
    else 'Last Updated on' + a.updateDate
end

or

case 
    when a.updatedDate = 1760 then 'Entered on' + a.updatedDate
    when a.updatedDate = 1710 then 'Viewed on' + a.updatedDate
    else 'Last Updated on' + a.updateDate
end

are equivalent. They may not work because you may need to convert date types to varchars to append them to other varchars.

The ScriptIgnoreAttribute class is in the System.Web.Extensions.dll assembly (Located under Assemblies > Framework in the VS Reference Manager). You have to add a reference to that assembly in your class library project.

You can find this information at top of the MSDN page for the ScriptIgnoreAttribute class.

What is the difference between a source template and an instance template?

The fact that Angular allows DOM manipulation means that the input markup into the compilation process sometimes differ from the output. Particularly, some input markup may be cloned a few times (like with ng-repeat) before being rendered to the DOM.

Angular terminology is a bit inconsistent, but it still distinguishes between two types of markups:

• Source template - the markup to be cloned, if needed. If cloned, this markup will not be rendered to the DOM.
• Instance template - the actual markup to be rendered to the DOM. If cloning is involved, each instance will be a clone.

The following markup demonstrates this:

<div ng-repeat="i in [0,1,2]">
    <my-directive>{{i}}</my-directive>
</div>

The source html defines

    <my-directive>{{i}}</my-directive>

which serves as the source template.

But as it is wrapped within an ng-repeat directive, this source template will be cloned (3 times in our case). These clones are instance template, each will appear in the DOM and be bound to the relevant scope.

I would recommend the following method 'run' and it will help us in getting STDOUT, STDERR and exit status as dictionary; The caller of this can read the dictionary return by 'run' method to know the actual state of process.

  def run (cmd):
       print "+ DEBUG exec({0})".format(cmd)
       p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE, universal_newlines=True, shell=True)
       (out, err) = p.communicate()
       ret        = p.wait()
       out        = filter(None, out.split('\n'))
       err        = filter(None, err.split('\n'))
       ret        = True if ret == 0 else False
       return dict({'output': out, 'error': err, 'status': ret})
  #end

The kind of array definition seems the key: In my case it is a one dimension array of 17 items which have to convert to a two dimension array

Defintion for columns: object[,] Array = new object[17, 1];

Defintion for rows object[,] Array= new object[1,17];

The code for value2 is in both cases the same Excel.Range cell = activeWorksheet.get_Range(Range); cell.Value2 = Array;

LG Georg

$(".mytext").mouseover(function() {
   var width = 250;
   var height = 270;
   var posX = $(this).offset().left - $(document).scrollLeft() - width + $(this).outerWidth();
   var posY = $(this).offset().top - $(document).scrollTop() + $(this).outerHeight();
   $("#dialog").dialog({width:width, height:height ,position:[posX, posY]});
}

Positions a dialog just under an element. I used offset() function just because it calculates the position relative to upper left corner of the browser, but position() function calculates the position relative to parent div or iframe that parent of the element.

You can use either lower or upper function on both sides of the where condition

In Oracle, something like this works nicely to separate your counting and ordering a little better. I'm not sure if it will work in MySql 4.

select 'Tag', counts.cnt
from
  (
  select count(*) as cnt, 'Tag'
  from 'images-tags'
  group by 'tag'
  ) counts
order by counts.cnt desc

No. To do it just once you would simply write the delete statement for the table you want to cascade.

DELETE FROM some_child_table WHERE some_fk_field IN (SELECT some_id FROM some_Table);
DELETE FROM some_table;

I remember the StaticSelectedStyle-CssClass attribute used to work in ASP.NET 2.0. And in .NET 4.0 if you change the Menu control's RenderingMode attribute "Table" (thus making it render the menu as s and sub-s like it did back '05) it will at least write your specified StaticSelectedStyle-CssClass into the proper html element.

That may be enough for you page to work like you want. However my work-around for the selected menu item in ASP 4.0 (when leaving RenderingMode to its default), is to mimic the control's generated "selected" CSS class but give mine the "!important" CSS declaration so my styles take precedence where needed.

For instance by default the Menu control renders an "li" element and child "a" for each menu item and the selected menu item's "a" element will contain class="selected" (among other control generated CSS class names including "static" if its a static menu item), therefore I add my own selector to the page (or in a separate stylesheet file) for "static" and "selected" "a" tags like so:

a.selected.static
{
background-color: #f5f5f5 !important;
border-top: Red 1px solid !important;
border-left: Red 1px solid !important;
border-right: Red 1px solid !important;
} 

Add bottom:100% to your #menu:hover ul li:hover ul rule

Demo 1

#menu:hover ul li:hover ul {
    position: absolute;
    margin-top: 1px;
    font: 10px;
    bottom: 100%; /* added this attribute */
}

Or better yet to prevent the submenus from having the same effect, just add this rule

Demo 2

#menu>ul>li:hover>ul { 
    bottom:100%;
}

Demo 3

source: http://jsfiddle.net/W5FWW/4/

And to get back the border you can add the following attribute

#menu>ul>li:hover>ul { 
    bottom:100%;
    border-bottom: 1px solid transparent
}

Came across this late, but I think it could use another answer.

If you're using sass, you can actually change the variables before you import bootstrap. http://twitter.github.com/bootstrap/customize.html#variables

Change any of them, such as:

$bodyBackground: red;
@import "bootstrap";

Alternatively if there isn't a variable available for what you want to change, you can override the styles or add your own.

Sass:

@import "bootstrap";

/* override anything manually, like rounded buttons */
.btn {
  border-radius: 0;
}

Also see this: Proper SCSS Asset Structure in Rails

useState() is an example built-in React hook that lets you use states in your functional components. This was not possible before React 16.7.

The useState function is a built in hook that can be imported from the react package. It allows you to add state to your functional components. Using the useState hook inside a function component, you can create a piece of state without switching to class components.

first of all;

a Fragment must be inside a FragmentActivity, that's the first rule,

a FragmentActivity is quite similar to a standart Activity that you already know, besides having some Fragment oriented methods

second thing about Fragments, is that there is one important method you MUST call, wich is onCreateView, where you inflate your layout, think of it as the setContentLayout

here is an example:

    @Override public View onCreateView(LayoutInflater inflater, ViewGroup container, Bundle savedInstanceState) {     mView       = inflater.inflate(R.layout.fragment_layout, container, false);       return mView; } 

and continu your work based on that mView, so to find a View by id, call mView.findViewById(..);

for the FragmentActivity part:

the xml part "must" have a FrameLayout in order to inflate a fragment in it

        <FrameLayout             android:id="@+id/content_frame"             android:layout_width="match_parent"             android:layout_height="match_parent"  >         </FrameLayout> 

as for the inflation part

getSupportFragmentManager().beginTransaction().replace(R.id.content_frame, new YOUR_FRAGMENT, "TAG").commit();

begin with these, as there is tons of other stuf you must know about fragments and fragment activities, start of by reading something about it (like life cycle) at the android developer site

I haven't tested this - but it should give you a general idea of the direction you need to take.

For this to work, I'm going to assume a few things about the text of the TextView:

1. The TextView consists of lines delimited with "\n".
2. The first line will not include an operator (+, -, * or /).
3. After the first line there can be a variable number of lines in the TextView which will all include one operator and one number.
4. An operator will allways be the first Char of a line.

First we get the text:

String input = tv1.getText().toString();

Then we split it up for each line:

String[] lines = input.split( "\n" );

Now we need to calculate the total value:

int total = Integer.parseInt( lines[0].trim() ); //We know this is a number.

for( int i = 1; i < lines.length(); i++ ) {
   total = calculate( lines[i].trim(), total );
}

The method calculate should look like this, assuming that we know the first Char of a line is the operator:

private int calculate( String input, int total ) {
   switch( input.charAt( 0 ) )
      case '+':
         return total + Integer.parseInt( input.substring( 1, input.length() );
      case '-':
         return total - Integer.parseInt( input.substring( 1, input.length() );             
      case '*':
         return total * Integer.parseInt( input.substring( 1, input.length() );             
      case '/':
         return total / Integer.parseInt( input.substring( 1, input.length() );
}

EDIT

So the above as stated in the comment below does "left-to-right" calculation, ignoring the normal order ( + and / before + and -).

The following does the calculation the right way:

String input = tv1.getText().toString();
input = input.replace( "\n", "" );
input = input.replace( " ", "" );
int total = getValue( input );

The method getValue is a recursive method and it should look like this:

private int getValue( String line ) {
  int value = 0;

  if( line.contains( "+" ) ) {
    String[] lines = line.split( "\\+" );
    value += getValue( lines[0] );

    for( int i = 1; i < lines.length; i++ )
      value += getValue( lines[i] );

    return value;
  }

  if( line.contains( "-" ) ) {
    String[] lines = line.split( "\\-" );
    value += getValue( lines[0] );

    for( int i = 1; i < lines.length; i++ )
      value -= getValue( lines[i] );

    return value;
  }

  if( line.contains( "*" ) ) {
    String[] lines = line.split( "\\*" );
    value += getValue( lines[0] );

    for( int i = 1; i < lines.length; i++ )
      value *= getValue( lines[i] );

    return value;
  }

  if( line.contains( "/" ) ) {
    String[] lines = line.split( "\\/" );
    value += getValue( lines[0] );

    for( int i = 1; i < lines.length; i++ )
      value /= getValue( lines[i] );

    return value;
  }

  return Integer.parseInt( line );
}

Special cases that the recursive method does not handle:

• If the first number is negative e.g. -3+5*8.
• Double operators e.g. 3*-6 or 5/-4.

Also the fact the we're using Integers might give some "odd" results in some cases as e.g. 5/3 = 1.

Here's a solution I find more flexible:

function sumOfArrayWithParameter (array, parameter) {
  let sum = null;
  if (array && array.length > 0 && typeof parameter === 'string') {
    sum = 0;
    for (let e of array) if (e && e.hasOwnProperty(parameter)) sum += e[parameter];
  }
  return sum;
}

To get the sum, simply use it like that:

let sum = sumOfArrayWithParameter(someArray, 'someProperty');

out: dict_values([{1:a, 2:b}])

in:  str(dict.values())[14:-3]    
out: 1:a, 2:b

Purely for visual purposes. Does not produce a useful product... Only useful if you want a long dictionary to print in a paragraph type form.

If you are using jupyter notebook Try:

!python --version

If you are using terminal Try:

 python --version

The best way to do this is by running the command:

git diff --name-only --cached

When you check the manual you will likely find the following:

--name-only
    Show only names of changed files.

And on the example part of the manual:

git diff --cached
    Changes between the index and your current HEAD.

Combined together you get the changes between the index and your current HEAD and Show only names of changed files.

Update: --staged is also available as an alias for --cached above in more recent git versions.

There are two steps to fix this.

First edit phpMyAdmin/libraries/DatabaseInterface.class.php

Change:

    if (PMA_MYSQL_INT_VERSION >  50503) {
        $default_charset = 'utf8mb4';
        $default_collation = 'utf8mb4_general_ci';
    } else {
        $default_charset = 'utf8';
        $default_collation = 'utf8_general_ci';
    }

To:

    //if (PMA_MYSQL_INT_VERSION >  50503) {
    //    $default_charset = 'utf8mb4';
    //    $default_collation = 'utf8mb4_general_ci';
    //} else {
        $default_charset = 'utf8';
        $default_collation = 'utf8_general_ci';
    //}

Then delete this cookie from your browser "pma_collation_connection".
Or delete all Cookies.

Then restart your phpMyAdmin.

(It would be nice if phpMyAdmin allowed you to set the charset and collation per server in the config.inc.php)

The error you're getting is that self.adj doesn't already have a key 0. You're trying to append to a list that doesn't exist yet.

Consider using a defaultdict instead, replacing this line (in __init__):

self.adj = {}

with this:

self.adj = defaultdict(list)

You'll need to import at the top:

from collections import defaultdict

Now rather than raise a KeyError, self.adj[0].append(edge) will create a list automatically to append to.

One possible use of B+ trees is that it is suitable for situations where the tree grows so large that it does not fit into available memory. Thus, you'd generally expect to be doing multiple I/O's.
It does often happen that a B+ tree is used even when it in fact fits into memory, and then your cache manager might keep it there permanently. But this is a special case, not the general one, and caching policy is a separate from B+ tree maintenance as such.

Also, in a B+ tree, the leaf pages are linked together in a linked list (or doubly-linked list), which optimizes traversals (for range searches, sorting, etc.). So the number of pointers is a function of the specific algorithm that is used.

There is the solution with Kotlin :

given(myObject.myCall()).willAnswer {
    throw IOException("Ooops")
}

Where given comes from

import org.mockito.BDDMockito.given

npm ci

Alternatively, as of npm cli v6.5.0 you can use the backronym:

npm clean-install

https://github.com/npm/cli/releases/tag/v6.5.0 https://github.com/npm/cli/commit/fc1a8d185fc678cdf3784d9df9eef9094e0b2dec

Or for fun you could use some LINQ extension goodness:

var dictionary = new Dictionary<string, int> { { "c", 3 }, { "a", 1 }, { "b", 2 } };
dictionary.OrderBy(x => x.Value)
  .ForEach(x => Console.WriteLine("{0}={1}", x.Key,x.Value));

This code works great for preparing the dynamic values Array for spinner in Android:

    List<String> yearStringList = new ArrayList<>();
    yearStringList.add("2017");
    yearStringList.add("2018");
    yearStringList.add("2019");


    String[] yearStringArray = (String[]) yearStringList.toArray(new String[yearStringList.size()]);

It seems like one closing brace is missing at ,right(a2.chdlm,2)))) from sysibm.sysdummy1 a1,

So your Query will be

select days(current date) - days(date(select concat(concat(concat(concat(left(a2.chdlm,4),'-'),substr(a2.chdlm,4,2)),'-'),right(a2.chdlm,2)))) from sysibm.sysdummy1 a1, chcart00 a2 where chstat = '05';

Seeing it in action might help you better understanding the difference.

Assuming we're working on master branch and have a file hello.txt that contains "Hello" string.

Let's modify the file and add " world" string to it. Now you want to move to a different branch to fix a minor bug you've just found, so you need to stash your changes:

git stash

You moved to the other branch, fixed the bug and now you're ready to continue working on your master branch, so you pop the changes:

git stash pop

Now if you try to review the stash content you'll get:

$ git stash show -p
No stash found.

However, if you use git stash apply instead, you'll get the stashed content but you'll also keep it:

$ git stash show -p
diff --git a/hello.txt b/hello.txt
index e965047..802992c 100644
--- a/hello.txt
+++ b/hello.txt
@@ -1 +1 @@
-Hello
+Hello world

So pop is just like stack's pop - it actually removes the element once it's popped, while apply is more like peek.

Error:Unable to start the daemon process.

This problem might be caused by incorrect configuration of the daemon. For example, an unrecognized JVM option is used.

Please refer to the user guide chapter on the daemon at https://docs.gradle.org/3.3/userguide/gradle_daemon.html

In my case it happen because RouterModule was missed in the import.

Workbooks.open("E:\sarath\PTMetrics\20131004\D8 L538-L550 16MY\D8 L538-L550_16MY_Powertrain Metrics_20131002.xlsm")

Or, in a more structured way...

Sub openwb()
    Dim sPath As String, sFile As String
    Dim wb As Workbook

    sPath = "E:\sarath\PTMetrics\20131004\D8 L538-L550 16MY\"
    sFile = sPath & "D8 L538-L550_16MY_Powertrain Metrics_20131002.xlsm"

    Set wb = Workbooks.Open(sFile)
End Sub

I found logs of Apache Tomcat/9.0.33 version in below path:

In tail -f /opt/tomcat/logs/catalina.out

Thanks.

For me I solved it by deleting the file of php_errors.txt in the relative folder. Then the file is created automatically again when the code runs next time, and with the errors printed this time.

If you have you static path set, then just use the <link rel="icon" href="/images/favicon.ico" type="image/x-icon"> in your views. No need for anything else. Please make sure that you have your images folder inside the public folder.

iOS 8 and iOS 9

Under iOS 8 and iOS 9 this location is now:

~/Library/Logs/CoreSimulator/<DEVICE_CODE>

So, the following will work:

tail -f ~/Library/Logs/CoreSimulator/<DEVICE_CODE>/system.log

The DEVICE_CODE value can be found via the following console command:

instruments -s devices

Echo inside an HTML element with class and style the element:

echo "<span class='name'>" . $ip['cityName'] . "</span>";