You can try my function for merging images horizontally or vertically without changing image ratio. just copy paste will work.

function merge($filename_x, $filename_y, $filename_result, $mergeType = 0) {

    //$mergeType 0 for horizandal merge 1 for vertical merge

 // Get dimensions for specified images
 list($width_x, $height_x) = getimagesize($filename_x);
 list($width_y, $height_y) = getimagesize($filename_y);


$lowerFileName = strtolower($filename_x); 
if(substr_count($lowerFileName, '.jpg')>0 || substr_count($lowerFileName, '.jpeg')>0){
    $image_x = imagecreatefromjpeg($filename_x);    
}else if(substr_count($lowerFileName, '.png')>0){
    $image_x = imagecreatefrompng($filename_x); 
}else if(substr_count($lowerFileName, '.gif')>0){
    $image_x = imagecreatefromgif($filename_x); 
}


$lowerFileName = strtolower($filename_y); 
if(substr_count($lowerFileName, '.jpg')>0 || substr_count($lowerFileName, '.jpeg')>0){
    $image_y = imagecreatefromjpeg($filename_y);    
}else if(substr_count($lowerFileName, '.png')>0){
    $image_y = imagecreatefrompng($filename_y); 
}else if(substr_count($lowerFileName, '.gif')>0){
    $image_y = imagecreatefromgif($filename_y); 
}


if($mergeType==0){
    //for horizandal merge
     if($height_y<$height_x){
        $new_height = $height_y;

        $new_x_height = $new_height;
        $precentageReduced = ($height_x - $new_height)/($height_x/100);
        $new_x_width = ceil($width_x - (($width_x/100) * $precentageReduced));

         $tmp = imagecreatetruecolor($new_x_width, $new_x_height);
        imagecopyresampled($tmp, $image_x, 0, 0, 0, 0, $new_x_width, $new_x_height, $width_x, $height_x);
        $image_x = $tmp;

        $height_x = $new_x_height;
        $width_x = $new_x_width;

     }else{
        $new_height = $height_x;

        $new_y_height = $new_height;
        $precentageReduced = ($height_y - $new_height)/($height_y/100);
        $new_y_width = ceil($width_y - (($width_y/100) * $precentageReduced));

         $tmp = imagecreatetruecolor($new_y_width, $new_y_height);
        imagecopyresampled($tmp, $image_y, 0, 0, 0, 0, $new_y_width, $new_y_height, $width_y, $height_y);
        $image_y = $tmp;

        $height_y = $new_y_height;
        $width_y = $new_y_width;

     }

     $new_width = $width_x + $width_y;

     $image = imagecreatetruecolor($new_width, $new_height);

    imagecopy($image, $image_x, 0, 0, 0, 0, $width_x, $height_x);
    imagecopy($image, $image_y, $width_x, 0, 0, 0, $width_y, $height_y);

}else{


    //for verical merge
    if($width_y<$width_x){
        $new_width = $width_y;

        $new_x_width = $new_width;
        $precentageReduced = ($width_x - $new_width)/($width_x/100);
        $new_x_height = ceil($height_x - (($height_x/100) * $precentageReduced));

        $tmp = imagecreatetruecolor($new_x_width, $new_x_height);
        imagecopyresampled($tmp, $image_x, 0, 0, 0, 0, $new_x_width, $new_x_height, $width_x, $height_x);
        $image_x = $tmp;

        $width_x = $new_x_width;
        $height_x = $new_x_height;

     }else{
        $new_width = $width_x;

        $new_y_width = $new_width;
        $precentageReduced = ($width_y - $new_width)/($width_y/100);
        $new_y_height = ceil($height_y - (($height_y/100) * $precentageReduced));

         $tmp = imagecreatetruecolor($new_y_width, $new_y_height);
        imagecopyresampled($tmp, $image_y, 0, 0, 0, 0, $new_y_width, $new_y_height, $width_y, $height_y);
        $image_y = $tmp;

        $width_y = $new_y_width;
        $height_y = $new_y_height;

     }

     $new_height = $height_x + $height_y;

     $image = imagecreatetruecolor($new_width, $new_height);

    imagecopy($image, $image_x, 0, 0, 0, 0, $width_x, $height_x);
    imagecopy($image, $image_y, 0, $height_x, 0, 0, $width_y, $height_y);

}





$lowerFileName = strtolower($filename_result); 
if(substr_count($lowerFileName, '.jpg')>0 || substr_count($lowerFileName, '.jpeg')>0){
    imagejpeg($image, $filename_result);
}else if(substr_count($lowerFileName, '.png')>0){
    imagepng($image, $filename_result);
}else if(substr_count($lowerFileName, '.gif')>0){
    imagegif($image, $filename_result); 
}


 // Clean up
 imagedestroy($image);
 imagedestroy($image_x);
 imagedestroy($image_y);

}


merge('images/h_large.jpg', 'images/v_large.jpg', 'images/merged_har.jpg',0); //merge horizontally
merge('images/h_large.jpg', 'images/v_large.jpg', 'images/merged.jpg',1); //merge vertically

Yes :)

Surfin' Safari - Blog Archive » CSS Masks

WebKit now supports alpha masks in CSS. Masks allow you to overlay the content of a box with a pattern that can be used to knock out portions of that box in the final display. In other words, you can clip to complex shapes based off the alpha of an image.
[...]
We have introduced new properties to provide Web designers with a lot of control over these masks and how they are applied. The new properties are analogous to the background and border-image properties that already exist.

-webkit-mask (background)
-webkit-mask-attachment (background-attachment)
-webkit-mask-clip (background-clip)
-webkit-mask-origin (background-origin)
-webkit-mask-image (background-image)
-webkit-mask-repeat (background-repeat)
-webkit-mask-composite (background-composite)
-webkit-mask-box-image (border-image)

You need to add a parent with a relative position, inside this parent you can set the absolute position of your divs

<div> <------Relative
  <div/> <------Absolute
  <div/> <------Absolute
  <div/> <------Absolute
<div/>

Final result:

https://codepen.io/hiteshsahu/pen/XWKYEYb?editors=0100

<div class="container">
  <div class="header">TOP: I am at Top & above of body container</div>
  
    <div class="center">CENTER: I am at Top & in Center of body container</div>
  
  <div class="footer">BOTTOM: I am at Bottom & above of body container</div>
</div>
    

Set HTML Body full width

 html, body {
  overflow: hidden;
  width: 100%;
  height: 100%;
  margin: 0;
  padding: 0;
}

After that, you can set a div with the relative position to take full width and height

.container {
  position: relative;
  background-color: blue;
  height: 100%;
  width: 100%;
  border:1px solid;
  color: white;
  background-image: url("https://images.pexels.com/photos/5591663/pexels-photo-5591663.jpeg?auto=compress&cs=tinysrgb&dpr=2&h=750&w=1260");
  background-color: #cccccc;
}

Inside this div with the relative position you can put your div with absolute positions

On TOP above the container

.header {
  position: absolute;
  margin-top: -10px;
  background-color: #d81b60 ;
  left:0;
  right:0;
  margin:15px;
  padding:10px;
  font-size: large;
}

On BOTTOM above the container

.footer {
  position: absolute;
  background-color: #00bfa5;
  left:0;
  right:0;
  bottom:0;
  margin:15px;
  padding:10px;
  color: white;
  font-size: large;

}

In CENTER above the container

.center {
  position: absolute;
  background-color: #00bfa5;
  left:  30%;
  right: 30%;
  bottom:30%;
  top: 30%;
  margin:10px;
  padding:10px;
  color: white;
  font-size: large;
}

I think this example will definitely help you overlay a transparent image on top of another image. This is made possible by drawing both the images on canvas and returning a bitmap image.

Read more or download demo here

private Bitmap createSingleImageFromMultipleImages(Bitmap firstImage, Bitmap secondImage){

        Bitmap result = Bitmap.createBitmap(firstImage.getWidth(), firstImage.getHeight(), firstImage.getConfig());
        Canvas canvas = new Canvas(result);
        canvas.drawBitmap(firstImage, 0f, 0f, null);
        canvas.drawBitmap(secondImage, 10, 10, null);
        return result;
    }

and call the above function on button click and pass the two images to our function as shown below

public void buttonMerge(View view) {

        Bitmap bigImage = BitmapFactory.decodeResource(getResources(), R.drawable.img1);
        Bitmap smallImage = BitmapFactory.decodeResource(getResources(), R.drawable.img2);
        Bitmap mergedImages = createSingleImageFromMultipleImages(bigImage, smallImage);

        img.setImageBitmap(mergedImages);
    }

For more than two images, you can follow this link, how to merge multiple images programmatically on android

<Canvas Panel.ZIndex="1" HorizontalAlignment="Left" VerticalAlignment="Top" Width="570">
  <!-- YOUR XAML CODE -->
</Canvas>

Have a look on code below. Tested and found working on Mobile and Tablet devices.

<!-- 1. The <iframe> (video player) will replace this <div> tag. -->
<div id="player"></div>

<script>
  // 2. This code loads the IFrame Player API code asynchronously.
  var tag = document.createElement('script');

  tag.src = "https://www.youtube.com/iframe_api";
  var firstScriptTag = document.getElementsByTagName('script')[0];
  firstScriptTag.parentNode.insertBefore(tag, firstScriptTag);

  // 3. This function creates an <iframe> (and YouTube player)
  //    after the API code downloads.
  var player;
  function onYouTubeIframeAPIReady() {
    player = new YT.Player('player', {
      height: '390',
      width: '640',
      videoId: 'M7lc1UVf-VE',
      events: {
        'onReady': onPlayerReady,
        'onStateChange': onPlayerStateChange
      }
    });
  }

  // 4. The API will call this function when the video player is ready.
  function onPlayerReady(event) {
    event.target.playVideo();
  }

  // 5. The API calls this function when the player's state changes.
  //    The function indicates that when playing a video (state=1),
  //    the player should play for six seconds and then stop.
  var done = false;
  function onPlayerStateChange(event) {
    if (event.data == YT.PlayerState.PLAYING && !done) {
      setTimeout(stopVideo, 6000);
      done = true;
    }
  }
  function stopVideo() {
    player.stopVideo();
  }
</script>

Note that the wmode=transparent fix only works if it's first so

http://www.youtube.com/embed/K3j9taoTd0E?wmode=transparent&rel=0

Not

http://www.youtube.com/embed/K3j9taoTd0E?rel=0&wmode=transparent

Hi you can used this code in pure css

as like this

css

.arrow {
cursor: pointer;
color: white;
border: 1px solid #AEAEAE;
border-radius: 30px;
background: #605F61;
font-size: 31px;
font-weight: bold;
display: inline-block;
line-height: 0px;
padding: 11px 3px;
}
.arrow:before{
 content: "×";
}

HTML

<a href="#" class="arrow"> 
</a>

? Live demo http://jsfiddle.net/rohitazad/VzZhU/

just i will find draw with some rectangle in mapview just we want change paint as we like

EmptyOverlay.java

public class EmptyOverlay extends Overlay {
private float x1,y1;
private MapExampleActivity mv = null;
private Overlay overlay = null;

public EmptyOverlay(MapExampleActivity mapV){
    mv = mapV;
}

@Override
public boolean draw(Canvas canvas, MapView mapView, boolean shadow,
        long when) {
    // TODO Auto-generated method stub
    return super.draw(canvas, mapView, shadow, when);
}

@Override
public boolean onTouchEvent(MotionEvent e, MapView mapView) {
    if(mv.isEditMode()){
        if(e.getAction() == MotionEvent.ACTION_DOWN){
            //when user presses the map add a new overlay to the map
            //move events will be catched by newly created overlay
            x1 = y1 = 0;
            x1 = e.getX();
            y1 = e.getY();

            overlay = new MapOverlay(mv, x1, y1);
            mapView.getOverlays().add(overlay);

        }
        if(e.getAction() == MotionEvent.ACTION_MOVE){
        }
        //---when user lifts his finger---
        if (e.getAction() == MotionEvent.ACTION_UP) {                

        }    
        return true;
    }
    return false;
}
}

MapExampleActivity.java

 public class MapExampleActivity extends MapActivity {
private MapView mapView;
private boolean isEditMode = false;
private Button toogle;

/** Called when the activity is first created. */
@Override
public void onCreate(Bundle savedInstanceState) {
    super.onCreate(savedInstanceState);
    setContentView(R.layout.main);

    toogle = (Button)findViewById(R.id.toogleMap);        
    toogle.setOnClickListener(new OnClickListener() {

        @Override
        public void onClick(View v) {
            toogleEditMode();

        }
    });

    mapView = (MapView)findViewById(R.id.mapview);
    mapView.setBuiltInZoomControls(true); //display zoom controls
    //add one empty overlay acting as a overlay loader. This will catch press events and will add the actual overlays
    mapView.getOverlays().add(new EmptyOverlay(this));
    mapView.postInvalidate();
}
//toogle edit mode for drawing or navigating the map
private void toogleEditMode(){
    isEditMode = !isEditMode;
}

@Override
protected boolean isRouteDisplayed() {
    // TODO Auto-generated method stub
    return false;
}
@Override
protected boolean isLocationDisplayed() {
    return false;
}

public boolean isEditMode(){
    return this.isEditMode;
}

public MapView getMapView(){
    return this.mapView;
}
}

MapOverlay.java

 public class MapOverlay extends Overlay {

private float x1,y1,x2,y2;
private GeoPoint p1=null,p2=null;
private MapExampleActivity mv = null;
private Paint paint = new Paint();
private boolean isUp = false;

//constructor receiving the initial point
public MapOverlay(MapExampleActivity mapV,float x,float y){
    paint.setStrokeWidth(2.0f);
    x1 = x;
    y1 = y;
    mv = mapV;
    p1 = mapV.getMapView().getProjection().fromPixels((int)x1,(int)y1);
}
//override draw method to add our custom drawings
@Override
public boolean draw(Canvas canvas, MapView mapView, boolean shadow,
        long when) {

    if(p1 != null && p2 != null){
        //get the 2 geopoints defining the area and transform them to pixels
        //this way if we move or zoom the map rectangle will follow accordingly
        Point screenPts1 = new Point();
        mapView.getProjection().toPixels(p1, screenPts1);
        Point screenPts2 = new Point();
        mapView.getProjection().toPixels(p2, screenPts2);

        //draw inner rectangle
        paint.setColor(0x4435EF56);
        paint.setStyle(Style.FILL);
        canvas.drawRect(screenPts1.x, screenPts1.y, screenPts2.x, screenPts2.y, paint);
        //draw outline rectangle
        paint.setColor(0x88158923);
        paint.setStyle(Style.STROKE);
        canvas.drawRect(screenPts1.x, screenPts1.y, screenPts2.x, screenPts2.y, paint);
    }
    return true;
}

@Override
public boolean onTouchEvent(MotionEvent e, MapView mapView) {
    if(mv.isEditMode() && !isUp){
        if(e.getAction() == MotionEvent.ACTION_DOWN){
            x1 = y1 = 0;
            x1 = e.getX();
            y1 = e.getY();
            p1 = mapView.getProjection().fromPixels((int)x1,(int)y1);

        }
        //here we constantly change geopoint p2 as we move out finger
        if(e.getAction() == MotionEvent.ACTION_MOVE){
            x2 = e.getX();
            y2 = e.getY();
            p2 = mapView.getProjection().fromPixels((int)x2,(int)y2);

        }
        //---when user lifts his finger---
        if (e.getAction() == MotionEvent.ACTION_UP) {                
            isUp = true;
        }    
        return true;
    }
    return false;
}
 }

see this http://n3vrax.wordpress.com/2011/08/13/drawing-overlays-on-android-map-view/

You should use rgba for overlaying your element with photos.rgba is a way to declare a color in CSS that includes alpha transparency support. you can use .row as an overlayer like this:

#header {
    background: url(../img/bg.jpg) 0 0 no-repeat fixed;
    height: 100%;
    overflow: hidden;
    color: #FFFFFF
 }

.row{
    background: rgba(39,62,84,0.82);
    overflow: hidden;
    height: 100%;
    z-index: 2;
}

Try this. Works fine in ICS. If You want to stop service simply click the notification generated in statusbar.

 public class HUD extends Service
 {
    protected boolean foreground = false;
    protected boolean cancelNotification = false;
    private Notification notification;
    private View myView;
    protected int id = 0;
    private WindowManager wm;
    private WindowManager.LayoutParams params;
    @Override
    public IBinder onBind(Intent intent) {
        return null;
    }
    @Override
    public void onCreate() {
        super.onCreate();
       // System.exit(0);
        Toast.makeText(getBaseContext(),"onCreate", Toast.LENGTH_SHORT).show();
        params = new WindowManager.LayoutParams(WindowManager.LayoutParams.WRAP_CONTENT, WindowManager.LayoutParams.WRAP_CONTENT,
                WindowManager.LayoutParams.TYPE_PHONE, WindowManager.LayoutParams.FLAG_NOT_TOUCH_MODAL
                        | WindowManager.LayoutParams.FLAG_WATCH_OUTSIDE_TOUCH | WindowManager.LayoutParams.FLAG_NOT_FOCUSABLE, PixelFormat.TRANSLUCENT);
        params.gravity=Gravity.TOP|Gravity.LEFT;
    wm = (WindowManager) getSystemService(WINDOW_SERVICE);
    inflateview();
    foregroundNotification(1);
    //moveToForeground(1,n,true);
    }     
   @Override
    public void onDestroy() {
        super.onDestroy();
        ((NotificationManager) getSystemService(NOTIFICATION_SERVICE)).cancel(0);
        Toast.makeText(getBaseContext(),"onDestroy", Toast.LENGTH_SHORT).show();
        if(myView != null)
        {
            ((WindowManager) getSystemService(WINDOW_SERVICE)).removeView(myView);
            myView = null;
        }
    }
    protected Notification foregroundNotification(int notificationId) 
   {    
    notification = new Notification(R.drawable.ic_launcher, "my Notification", System.currentTimeMillis());    
        notification.flags = notification.flags | Notification.FLAG_ONGOING_EVENT | Notification.FLAG_ONLY_ALERT_ONCE;   
        notification.setLatestEventInfo(this, "my Notification", "my Notification", notificationIntent());          
        ((NotificationManager) getSystemService(NOTIFICATION_SERVICE)).notify(id, notification);            
        return notification;
    }
    private PendingIntent notificationIntent() {
        Intent intent = new Intent(this, stopservice.class);    
        PendingIntent pending = PendingIntent.getActivity(this, 0, intent, PendingIntent.FLAG_UPDATE_CURRENT);    
        return pending;
    }
    public void inflateview()
    {
         LayoutInflater inflater = (LayoutInflater) getSystemService(LAYOUT_INFLATER_SERVICE);
            myView = inflater.inflate(R.layout.activity_button, null);
            myView.setOnTouchListener(new OnTouchListener() {
               @Override
               public boolean onTouch(View v, MotionEvent event) {
                   Toast.makeText(getBaseContext(),"onToasttt", Toast.LENGTH_SHORT).show();
                   return false;
               }
             });
            // Add layout to window manager
            wm.addView(myView, params); 
    }
}

UPDATE

Sample here

To create an overlay view, when setting up the LayoutParams DON'T set the type to TYPE_SYSTEM_OVERLAY.

Instead set it to TYPE_PHONE.

Use the following flags:

FLAG_NOT_TOUCH_MODAL

FLAG_WATCH_OUTSIDE_TOUCH

Please note that setting font-sizing with px is not recommended due to accessibility concerns:

"defining font sizes in px is not accessible, because the user cannot change the font size in some browsers. For example, users with limited vision may wish to set the font size much larger than the size chosen by a web designer." (see https://developer.mozilla.org/en-US/docs/Web/CSS/font-size)

A more accessible approach is to set font-size: 100% in the html, which respects user default size settings, and THEN using either percentages or relative units when resizing (em or rem), for example with a @media query.

(see https://betterwebtype.com/articles/2019/06/16/5-keys-to-accessible-web-typography/)

The Problem

In MySQL, certain words like SELECT, INSERT, DELETE etc. are reserved words. Since they have a special meaning, MySQL treats it as a syntax error whenever you use them as a table name, column name, or other kind of identifier - unless you surround the identifier with backticks.

As noted in the official docs, in section 10.2 Schema Object Names (emphasis added):

Certain objects within MySQL, including database, table, index, column, alias, view, stored procedure, partition, tablespace, and other object names are known as identifiers.

...

If an identifier contains special characters or is a reserved word, you must quote it whenever you refer to it.

...

The identifier quote character is the backtick ("`"):

A complete list of keywords and reserved words can be found in section 10.3 Keywords and Reserved Words. In that page, words followed by "(R)" are reserved words. Some reserved words are listed below, including many that tend to cause this issue.

• ADD
• AND
• BEFORE
• BY
• CALL
• CASE
• CONDITION
• DELETE
• DESC
• DESCRIBE
• FROM
• GROUP
• IN
• INDEX
• INSERT
• INTERVAL
• IS
• KEY
• LIKE
• LIMIT
• LONG
• MATCH
• NOT
• OPTION
• OR
• ORDER
• PARTITION
• RANK
• REFERENCES
• SELECT
• TABLE
• TO
• UPDATE
• WHERE

The Solution

You have two options.

1. Don't use reserved words as identifiers

The simplest solution is simply to avoid using reserved words as identifiers. You can probably find another reasonable name for your column that is not a reserved word.

Doing this has a couple of advantages:

• It eliminates the possibility that you or another developer using your database will accidentally write a syntax error due to forgetting - or not knowing - that a particular identifier is a reserved word. There are many reserved words in MySQL and most developers are unlikely to know all of them. By not using these words in the first place, you avoid leaving traps for yourself or future developers.

• The means of quoting identifiers differs between SQL dialects. While MySQL uses backticks for quoting identifiers by default, ANSI-compliant SQL (and indeed MySQL in ANSI SQL mode, as noted here) uses double quotes for quoting identifiers. As such, queries that quote identifiers with backticks are less easily portable to other SQL dialects.

Purely for the sake of reducing the risk of future mistakes, this is usually a wiser course of action than backtick-quoting the identifier.

2. Use backticks

If renaming the table or column isn't possible, wrap the offending identifier in backticks (`) as described in the earlier quote from 10.2 Schema Object Names.

An example to demonstrate the usage (taken from 10.3 Keywords and Reserved Words):

mysql> CREATE TABLE interval (begin INT, end INT);
ERROR 1064 (42000): You have an error in your SQL syntax.
near 'interval (begin INT, end INT)'
mysql> CREATE TABLE `interval` (begin INT, end INT);
Query OK, 0 rows affected (0.01 sec)

Similarly, the query from the question can be fixed by wrapping the keyword key in backticks, as shown below:

INSERT INTO user_details (username, location, `key`)
VALUES ('Tim', 'Florida', 42)";               ^   ^

preg_replace("[^\w\s\d\.\-_~,;:\[\]\(\]]", '', $file)

Add/remove more valid characters depending on what is allowed for your system.

Alternatively you can try to create the file and then return an error if it's bad.

You can probably start a Service here if you want your Application to run in Background. This is what Service in Android are used for - running in background and doing longtime operations.

UDPATE

You can use START_STICKY to make your Service running continuously.

@Override
public int onStartCommand(Intent intent, int flags, int startId) {
    handleCommand(intent);
    // We want this service to continue running until it is explicitly
    // stopped, so return sticky.
    return START_STICKY;
}

I use inline if's

($_POST['category'] == $data['id'] ? 'selected="selected"' : false)

To show result till yesterday

WHERE DATE(date_time) < CURDATE()

To show results of 10 days

WHERE date_time < NOW() - INTERVAL 10 DAY

To show results before 10 days

WHERE DATE(date_time) < DATE(NOW() - INTERVAL 10 DAY)

These will work for you

You can find dates like this

SELECT DATE(NOW() - INTERVAL 11 DAY)

compareTo() is called on one object, to compare it to another object. compare() is called on some object to compare two other objects.

The difference is where the logic that does actual comparison is defined.

Environment.GetSystemVariable("%SystemDrive%"); will provide the drive OS installed, and you can set filters to savedialog Obtain file path of C# save dialog box

Swift 4 You cannot compare Any to nil.Because an optional can be nil and hence it always succeeds to true. The only way is to cast it to your desired object and compare it to nil.

if (someone as? String) != nil
{
   //your code`enter code here`
}

Try this:

cat /etc/apt/sources.list

The CGI is specified in RFC 3875, though that is a later "official" codification of the original NCSA document. Basically, CGI defines a protocol to pass data about a HTTP request from a webserver to a program to process - any program, in any language. At the time the spec was written (1993), most web servers contained only static pages, "web apps" were a rare and new thing, so it seemed natural to keep them apart from the "normal" static content, such as in a cgi-bin directory apart from the static content, and having them end in .cgi.

At this time, here also were no dedicated "web programming languages" like PHP, and C was the dominating portable programming language - so many people wrote their CGI scripts in C. But Perl quickly turned out to be a better fit for this kind of thing, and CGI became almost synonymous with Perl for a while. Then there came Java Servlets, PHP and a bunch of others and took over large parts of Perl's market share.

var jsonData = { Name: "Ricardo Vasquez", age: "46", Email: "[email protected]" };

for (x in jsonData) {   
  console.log(x +" => "+ jsonData[x]);  
  alert(x +" => "+  jsonData[x]);  
  }

Another solution could be use the uncommit command to exclude specific file from current commit.

hg uncommit [file/directory]

This is very helpful when you want to keep current commit and deselect some files from commit (especially helpful for files/directories have been deleted).

http://windows.microsoft.com/en-US/windows7/schedule-a-task

maybe that will help with windows scheduled tasks ...

Keep in mind that MySQL has a maximum row size limit

The internal representation of a MySQL table has a maximum row size limit of 65,535 bytes, not counting BLOB and TEXT types. BLOB and TEXT columns only contribute 9 to 12 bytes toward the row size limit because their contents are stored separately from the rest of the row. Read more about Limits on Table Column Count and Row Size.

Maximum size a single column can occupy, is different before and after MySQL 5.0.3

Values in VARCHAR columns are variable-length strings. The length can be specified as a value from 0 to 255 before MySQL 5.0.3, and 0 to 65,535 in 5.0.3 and later versions. The effective maximum length of a VARCHAR in MySQL 5.0.3 and later is subject to the maximum row size (65,535 bytes, which is shared among all columns) and the character set used.

However, note that the limit is lower if you use a multi-byte character set like utf8 or utf8mb4.

Use TEXT types inorder to overcome row size limit.

The four TEXT types are TINYTEXT, TEXT, MEDIUMTEXT, and LONGTEXT. These correspond to the four BLOB types and have the same maximum lengths and storage requirements.

More details on BLOB and TEXT Types

• Ref for MySQLv8.0 https://dev.mysql.com/doc/refman/8.0/en/blob.html
• Ref for MySQLv5.7 http://dev.mysql.com/doc/refman/5.7/en/blob.html
• Ref for MySQLv5.6 http://dev.mysql.com/doc/refman/5.6/en/blob.html
• Ref for MySQLv5.5 http://dev.mysql.com/doc/refman/5.5/en/blob.html
• Ref for MySQLv5.1 http://dev.mysql.com/doc/refman/5.1/en/blob.html
• Ref for MySQLv5.0 http://dev.mysql.com/doc/refman/5.0/en/blob.html

Even more

Checkout more details on Data Type Storage Requirements which deals with storage requirements for all data types.

You can't.

As a workaround you can use a // @ts-nocheck comment at the top of a file to disable type-checking for that file: https://devblogs.microsoft.com/typescript/announcing-typescript-3-7-beta/

So to disable checking for a block (function, class, etc.), you can move it into its own file, then use the comment/flag above. (This isn't as flexible as block-based disabling of course, but it's the best option available at the moment.)

You could use Jackson to do this. I have yet to find a simple Gson solution.

Where data_map.json is a JSON (object) resource file
and data_list.json is a JSON (array) resource file.

import java.io.File;
import java.io.IOException;
import java.net.MalformedURLException;
import java.net.URISyntaxException;
import java.net.URL;
import java.util.List;
import java.util.Map;
import java.util.Scanner;

import com.fasterxml.jackson.core.JsonGenerationException;
import com.fasterxml.jackson.core.JsonParseException;
import com.fasterxml.jackson.core.JsonProcessingException;
import com.fasterxml.jackson.core.type.TypeReference;
import com.fasterxml.jackson.databind.JsonMappingException;
import com.fasterxml.jackson.databind.ObjectMapper;

/**
 * Based on:
 * 
 * http://www.mkyong.com/java/how-to-convert-java-map-to-from-json-jackson/
 */
public class JsonLoader {
    private static final ObjectMapper OBJ_MAPPER;
    private static final TypeReference<Map<String,Object>> OBJ_MAP;
    private static final TypeReference<List<Map<String,Object>>> OBJ_LIST;

    static {
        OBJ_MAPPER = new ObjectMapper();
        OBJ_MAP = new TypeReference<Map<String,Object>>(){};
        OBJ_LIST = new TypeReference<List<Map<String,Object>>>(){};
    }

    public static void main(String[] args) {
        try {
            System.out.println(jsonToString(parseJsonString(read("data_map.json", true))));
            System.out.println(jsonToString(parseJsonString(read("data_array.json", true))));
        } catch (IOException e) {
            e.printStackTrace();
        }
    }

    private static final Object parseJsonString(String jsonString) {
        try {
            if (jsonString.startsWith("{")) {
                return readJsonObject(jsonString);
            } else if (jsonString.startsWith("[")) {
                return readJsonArray(jsonString);
            }
        } catch (JsonGenerationException e) {
            e.printStackTrace();
        } catch (JsonMappingException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
        }

        return null;
    }

    public static String jsonToString(Object json) throws JsonProcessingException {
        return OBJ_MAPPER.writerWithDefaultPrettyPrinter().writeValueAsString(json);
    }

    private static final Map<String,Object> readJsonObject(String jsonObjectString) throws JsonParseException, JsonMappingException, IOException {
        return OBJ_MAPPER.readValue(jsonObjectString, OBJ_MAP);
    }

    private static final List<Map<String,Object>> readJsonArray(String jsonArrayString) throws JsonParseException, JsonMappingException, IOException {
        return OBJ_MAPPER.readValue(jsonArrayString, OBJ_LIST);
    }

    public static final Map<String,Object> loadJsonObject(String path, boolean isResource) throws JsonParseException, JsonMappingException, MalformedURLException, IOException {
        return OBJ_MAPPER.readValue(load(path, isResource), OBJ_MAP);
    }

    public static final List<Map<String,Object>> loadJsonArray(String path, boolean isResource) throws JsonParseException, JsonMappingException, MalformedURLException, IOException {
        return OBJ_MAPPER.readValue(load(path, isResource), OBJ_LIST);
    }

    private static final URL pathToUrl(String path, boolean isResource) throws MalformedURLException {
        if (isResource) {
            return JsonLoader.class.getClassLoader().getResource(path);
        }

        return new URL("file:/" + path);
    }

    protected static File load(String path, boolean isResource) throws MalformedURLException {
        return load(pathToUrl(path, isResource));
    }

    protected static File load(URL url) {
        try {
            return new File(url.toURI());
        } catch (URISyntaxException e) {
            return new File(url.getPath());
        }
    }

    public static String read(String path, boolean isResource) throws IOException {
        return read(path, "UTF-8", isResource);
    }

    public static String read(String path, String charset, boolean isResource) throws IOException {
        return read(pathToUrl(path, isResource), charset);
    }

    @SuppressWarnings("resource")
    public static String read(URL url, String charset) throws IOException {
        return new Scanner(url.openStream(), charset).useDelimiter("\\A").next();
    }
}

Extra

Here is the complete code for Dheeraj Sachan's example.

import java.io.File;
import java.io.IOException;
import java.io.Serializable;
import java.net.MalformedURLException;
import java.net.URISyntaxException;
import java.net.URL;
import java.text.DateFormat;
import java.text.SimpleDateFormat;
import java.util.HashMap;
import java.util.Iterator;
import java.util.List;
import java.util.Map.Entry;
import java.util.Scanner;

import com.fasterxml.jackson.annotation.JsonAutoDetect;
import com.fasterxml.jackson.annotation.PropertyAccessor;
import com.fasterxml.jackson.core.JsonParseException;
import com.fasterxml.jackson.databind.DeserializationFeature;
import com.fasterxml.jackson.databind.JsonMappingException;
import com.fasterxml.jackson.databind.ObjectMapper;
import com.fasterxml.jackson.databind.PropertyNamingStrategy;

public class JsonHandler {
    private static ObjectMapper propertyMapper;

    static {
        final DateFormat df = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss");

        propertyMapper = new ObjectMapper();
        propertyMapper.setDateFormat(df);
        propertyMapper.configure(DeserializationFeature.FAIL_ON_UNKNOWN_PROPERTIES, false);
        propertyMapper.setVisibility(PropertyAccessor.FIELD, JsonAutoDetect.Visibility.ANY);
        propertyMapper.setPropertyNamingStrategy(PropertyNamingStrategy.CAMEL_CASE_TO_LOWER_CASE_WITH_UNDERSCORES);
    }

    private static class MyHashMap extends HashMap<String, List<Video>>{
        private static final long serialVersionUID = 7023107716981734468L;
    }

    private static class Video implements Serializable {
        private static final long serialVersionUID = -446275421030765463L;

        private String dashUrl;
        private String videoBitrate;
        private String audioBitrate;
        private int videoWidth;
        private int videoHeight;
        private long fileSize;

        @Override
        public String toString() {
            return "Video [url=" + dashUrl + ", video=" + videoBitrate + ", audio=" + audioBitrate
                    + ", width=" + videoWidth + ", height=" + videoHeight + ", size=" + fileSize + "]";
        }
    }

    public static void main(String[] args) {
        try {
            HashMap<String, List<Video>> map = loadJson("sample.json", true);
            Iterator<Entry<String, List<Video>>> lectures = map.entrySet().iterator();

            while (lectures.hasNext()) {
                Entry<String, List<Video>> lecture = lectures.next();

                System.out.printf("Lecture #%s%n", lecture.getKey());

                for (Video video : lecture.getValue()) {
                    System.out.println(video);
                }
            }
        } catch (IOException e) {
            e.printStackTrace();
        }
    }

    public static <T> T parseUnderScoredResponse(String json, Class<T> classOfT) {
        try {
            if (json == null) {
                return null;
            }
            return propertyMapper.readValue(json, classOfT);

        } catch (JsonParseException e) {
            e.printStackTrace();
        } catch (JsonMappingException e) {
            e.printStackTrace();
        } catch (IOException e) {
            e.printStackTrace();
        }
        return null;
    }

    public static URL pathToUrl(String path, boolean isResource) throws MalformedURLException {
        if (isResource) {
            return JsonHandler.class.getClassLoader().getResource(path);
        }

        return new URL("file:/" + path);
    }

    public static File load(String path, boolean isResource) throws MalformedURLException {
        return load(pathToUrl(path, isResource));
    }

    public static File load(URL url) {
        try {
            return new File(url.toURI());
        } catch (URISyntaxException e) {
            return new File(url.getPath());
        }
    }

    @SuppressWarnings("resource")
    public static String readFile(URL url, String charset) throws IOException {
        return new Scanner(url.openStream(), charset).useDelimiter("\\A").next();
    }

    public static String loadJsonString(String path, boolean isResource) throws IOException {
        return readFile(path, isResource, "UTF-8");
    }

    public static String readFile(String path, boolean isResource, String charset) throws IOException {
        return readFile(pathToUrl(path, isResource), charset);
    }

    public static HashMap<String, List<Video>> loadJson(String jsonString) throws IOException {
        return JsonHandler.parseUnderScoredResponse(jsonString, MyHashMap.class);
    }

    public static HashMap<String, List<Video>> loadJson(String path, boolean isResource) throws IOException {
        return loadJson(loadJsonString(path, isResource));
    }
}

You have to use max-width instead of min-width.

<style>
    @media (max-width: 1026px) {
        #test {
            display: none;
        }
    }
</style>
<div id="test">
    <h1>Test</h1>
</div>

Here is my working code

/**
 * Method to code text in clip board
 *
 * @param context context
 * @param text    text what wan to copy in clipboard
 * @param label   label what want to copied
 */
public static void copyCodeInClipBoard(Context context, String text, String label) {
    if (context != null) {
        ClipboardManager clipboard = (ClipboardManager) context.getSystemService(CLIPBOARD_SERVICE);
        ClipData clip = ClipData.newPlainText(label, text);
        if (clipboard == null || clip == null)
            return;
        clipboard.setPrimaryClip(clip);

    }
}

Use attribute binding syntax instead

<ol class="viewer-nav"><li *ngFor="let section of sections" 
    [attr.data-sectionvalue]="section.value">{{ section.text }}</li>  
</ol>

or

<ol class="viewer-nav"><li *ngFor="let section of sections" 
    attr.data-sectionvalue="{{section.value}}">{{ section.text }}</li>  
</ol>

See also :

• How to add conditional attribute in Angular 2?

I always use the following pattern:

x_inches = 150*(1/25.4)     # [mm]*constant
y_inches = x_inches*(0.8)
dpi = 96

fig = plt.figure(1, figsize = (x_inches,y_inches), dpi = dpi, constrained_layout = True)

With this example you are able to set figure dimensions in inches or in milimiters and setting constrained_layout to True plots fill your figure without borders.

Method overloading deals with the notion of having two or more methods in the same class with the same name but different arguments.

void foo(int a)
void foo(int a, float b)

Method overriding means having two methods with the same arguments, but different implementations. One of them would exist in the parent class, while another will be in the derived, or child class. The @Override annotation, while not required, can be helpful to enforce proper overriding of a method at compile time.

class Parent {
    void foo(double d) {
        // do something
    }
}

class Child extends Parent {

    @Override
    void foo(double d){
        // this method is overridden.  
    }
}

Given a data setup like this:

The formula in cell D2 and copied down is:

=INDEX($B$2:$B$28,MATCH(1,INDEX(($A$2:$A$28=LARGE($A$2:$A$28,ROWS(D$1:D1)))*(COUNTIF(D$1:D1,$B$2:$B$28)=0),),0))

This formula will work even if there are tied OPS scores among players.

Adding the following line in the head tag fixed my issue.

<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">

You could do like this:

SELECT city FROM user WHERE (firstName, lastName) IN (('a', 'b'), ('c', 'd'));

The sqlfiddle.

One reason for this error is very silly mistake in code. If proper value is not passed to a property of ActiveX, then also this error is thrown.

Like empty value is passed to Font.Name property or text value is passed to Height property.

For example,

package main

import (
    "fmt"
    "strings"
)

func main() {
    s := "\t Hello, World\n "
    fmt.Printf("%d %q\n", len(s), s)
    t := strings.TrimSpace(s)
    fmt.Printf("%d %q\n", len(t), t)
}

Output:

16 "\t Hello, World\n "
12 "Hello, World"

Immediately after you start a new activity, using startActivity, make sure you call finish() so that the current activity is not stacked behind the new one.

There should be a line in your postgresql.conf file that says:

port = 1486

Change that.

The location of the file can vary depending on your install options. On Debian-based distros it is /etc/postgresql/8.3/main/

On Windows it is C:\Program Files\PostgreSQL\9.3\data

Don't forget to sudo service postgresql restart for changes to take effect.

It can be done this way as well

foreach (Company company in listofCompany.Where(d => d.Id = 1)).ToList())
                {
                    //do your stuff here
                    company.Id= 2;
                    company.Name= "Sample"
                }

You can declare SqlConnection and SqlCommand instances at global level so that you can use it through out the class. Connection string is in Web.Config.

SqlConnection sqlConn = new SqlConnection(WebConfigurationManager.ConnectionStrings["SqlConnector"].ConnectionString);
SqlCommand sqlcomm = new SqlCommand();

Now you can use the below method to pass values to Stored Procedure and get the DataSet.

public DataSet GetDataSet(string paramValue)
{
    sqlcomm.Connection = sqlConn;
    using (sqlConn)
    {
        try
        {
            using (SqlDataAdapter da = new SqlDataAdapter())
            {  
                // This will be your input parameter and its value
                sqlcomm.Parameters.AddWithValue("@ParameterName", paramValue);

                // You can retrieve values of `output` variables
                var returnParam = new SqlParameter
                {
                    ParameterName = "@Error",
                    Direction = ParameterDirection.Output,
                    Size = 1000
                };
                sqlcomm.Parameters.Add(returnParam);
                // Name of stored procedure
                sqlcomm.CommandText = "StoredProcedureName";
                da.SelectCommand = sqlcomm;
                da.SelectCommand.CommandType = CommandType.StoredProcedure;

                DataSet ds = new DataSet();
                da.Fill(ds);                            
            }
        }
        catch (SQLException ex)
        {
            Console.WriteLine("SQL Error: " + ex.Message);
        }
        catch (Exception e)
        {
            Console.WriteLine("Error: " + e.Message);
        }
    }
    return new DataSet();
}

The following is the sample of connection string in config file

<connectionStrings>
    <add name="SqlConnector"
         connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;Initial Catalog=YourDatabaseName;User id=YourUserName;Password=YourPassword"
         providerName="System.Data.SqlClient" />
</connectionStrings>

This happened to me when I was already using @Transactional(value=...) and was using multiple transaction managers.

My forms were sending back data that already had @JsonIgnore on them, so the data being sent back from forms was incomplete.

Originally I used the anti pattern solution, but found it was incredibly slow. I disabled this by setting it to false.

spring.jpa.properties.hibernate.enable_lazy_load_no_trans=false

The fix was to ensure that any objects that had lazy-loaded data that weren't loading were retrieved from the database first.

Optional<Object> objectDBOpt = objectRepository.findById(object.getId());

if (objectDBOpt.isEmpty()) {
    // Throw error
} else {
    Object objectFromDB = objectDBOpt.get();
}

In short, if you've tried all of the other answers, just make sure you look back to check you're loading from the database first if you haven't provided all the @JsonIgnore properties and are using them in your database query.

When using javascript: in navigation the return value of the executed script, if there is one, becomes the content of a new document which is displayed in the browser. The void operator in JavaScript causes the return value of the expression following it to return undefined, which prevents this action from happening. You can try it yourself, copy the following into the address bar and press return:

javascript:"hello"

The result is a new page with only the word "hello". Now change it to:

javascript:void "hello"

...nothing happens.

When you write javascript: on its own there's no script being executed, so the result of that script execution is also undefined, so the browser does nothing. This makes the following more or less equivalent:

javascript:undefined;
javascript:void 0;
javascript:

With the exception that undefined can be overridden by declaring a variable with the same name. Use of void 0 is generally pointless, and it's basically been whittled down from void functionThatReturnsSomething().

As others have mentioned, it's better still to use return false; in the click handler than use the javascript: protocol.

You can probably encode the tar file in Base64. Base 64 will give you a pure ASCII representation of the file that you can store in a plain text file. Then you can retrieve the tar file by decoding the text back.

You do something like:

require 'base64'

file_contents = Base64.encode64(tar_file_data)

Have look at the Base64 Rubydocs to get a better idea.

You actually don't need an ABI at all if--

• Your program doesn't have functions, and--
• Your program is a single executable that is running alone (i.e. an embedded system) where it's literally the only thing running and it doesn't need to talk to anything else.

An oversimplified summary:

API: "Here are all the functions you may call."

ABI: "This is how to call a function."

The ABI is set of rules that compilers and linkers adhere to in order to compile your program so that will work properly. ABIs cover multiple topics:

• Arguably the biggest and most important part of an ABI is the procedure call standard sometimes known as the "calling convention". Calling conventions standardize how "functions" are translated to assembly code.
• ABIs also dictate the how the names of exposed functions in libraries should be represented so that other code can call those libraries and know what arguments should be passed. This is called "name mangling".
• ABIs also dictate what type of data types can be used, how they must be aligned, and other low-level details.

Taking a deeper look at calling convention, which I consider to be the core of an ABI:

The machine itself has no concept of "functions". When you write a function in a high-level language like c, the compiler generates a line of assembly code like _MyFunction1:. This is a label, which will eventually get resolved into an address by the assembler. This label marks the "start" of your "function" in the assembly code. In high-level code, when you "call" that function, what you're really doing is causing the CPU to jump to the address of that label and continue executing there.

In preparation for the jump, the compiler must do a bunch of important stuff. The calling convention is like a checklist that the compiler follows to do all this stuff:

• First, the compiler inserts a little bit of assembly code to save the current address, so that when your "function" is done, the CPU can jump back to the right place and continue executing.
• Next, the compiler generates assembly code to pass the arguments.
  • Some calling conventions dictate that arguments should be put on the stack (in a particular order of course).
  • Other conventions dictate that the arguments should be put in particular registers (depending on their data types of course).
  • Still other conventions dictate that a specific combination of stack and registers should be used.
• Of course, if there was anything important in those registers before, those values are now overwritten and lost forever, so some calling conventions may dictate that the compiler should save some of those registers prior to putting the arguments in them.
• Now the compiler inserts a jump instruction telling the CPU to go to that label it made previously (_MyFunction1:). At this point, you can consider the CPU to be "in" your "function".
• At the end of the function, the compiler puts some assembly code that will make the CPU write the return value in the correct place. The calling convention will dictate whether the return value should be put into a particular register (depending on its type), or on the stack.
• Now it's time for clean-up. The calling convention will dictate where the compiler places the cleanup assembly code.
  • Some conventions say that the caller must clean up the stack. This means that after the "function" is done and the CPU jumps back to where it was before, the very next code to be executed should be some very specific cleanup code.
  • Other conventions say that the some particular parts of the cleanup code should be at the end of the "function" before the jump back.

There are many different ABIs / calling conventions. Some main ones are:

• For the x86 or x86-64 CPU (32-bit environment):
  • CDECL
  • STDCALL
  • FASTCALL
  • VECTORCALL
  • THISCALL
• For the x86-64 CPU (64-bit environment):
  • SYSTEMV
  • MSNATIVE
  • VECTORCALL
• For the ARM CPU (32-bit)
  • AAPCS
• For the ARM CPU (64-bit)
  • AAPCS64

Here is a great page that actually shows the differences in the assembly generated when compiling for different ABIs.

Another thing to mention is that an ABI isn't only relevant inside your program's executable module. It's also used by the linker to make sure your program calls library functions correctly. You have multiple shared libraries running on your computer, and as long as your compiler knows what ABI they each use, it can call functions from them properly without blowing up the stack.

Your compiler understanding how to call library functions is extremely important. On a hosted platform (that is, one where an OS loads programs), your program can't even blink without making a kernel call.

Lazy loading is a design pattern commonly used in computer programming to defer initialization of an object until the point at which it is needed. It can contribute to efficiency in the program's operation if properly and appropriately used

Wikipedia

Link of Lazy Loading from hibernate.org

I Have the same problem I solved it by changing Integrated Security=True to false now its working

Those are the bitwise AND and bitwise OR operators.

int a = 6; // 110
int b = 4; // 100

// Bitwise AND    

int c = a & b;
//   110
// & 100
// -----
//   100

// Bitwise OR

int d = a | b;
//   110
// | 100
// -----
//   110

System.out.println(c); // 4
System.out.println(d); // 6

Thanks to Carlos for pointing out the appropriate section in the Java Language Spec (15.22.1, 15.22.2) regarding the different behaviors of the operator based on its inputs.

Indeed when both inputs are boolean, the operators are considered the Boolean Logical Operators and behave similar to the Conditional-And (&&) and Conditional-Or (||) operators except for the fact that they don't short-circuit so while the following is safe:

if((a != null) && (a.something == 3)){
}

This is not:

if((a != null) & (a.something == 3)){
}

"Short-circuiting" means the operator does not necessarily examine all conditions. In the above examples, && will examine the second condition only when a is not null (otherwise the whole statement will return false, and it would be moot to examine following conditions anyway), so the statement of a.something will not raise an exception, or is considered "safe."

The & operator always examines every condition in the clause, so in the examples above, a.something may be evaluated when a is in fact a null value, raising an exception.

int max = 50;
int min = 1;

1. Using Math.random()

double random = Math.random() * 49 + 1;
or
int random = (int )(Math.random() * 50 + 1);

This will give you value from 1 to 50 in case of int or 1.0 (inclusive) to 50.0 (exclusive) in case of double

Why?

random() method returns a random number between 0.0 and 0.9..., you multiply it by 50, so upper limit becomes 0.0 to 49.999... when you add 1, it becomes 1.0 to 50.999..., now when you truncate to int, you get 1 to 50. (thanks to @rup in comments). leepoint's awesome write-up on both the approaches.

2. Using Random class in Java.

Random rand = new Random(); 
int value = rand.nextInt(50); 

This will give value from 0 to 49.

For 1 to 50: rand.nextInt((max - min) + 1) + min;

Source of some Java Random awesomeness.

You can use my highlight script from https://github.com/kepkin/dev-shell-essentials

It's better than grep cause you can highlight each match with it's own color.

$ command_here | highlight green "input" | highlight red "output"

Are you sure your processor supports Intel Virtualization (VT-x) or AMD Virtualization (AMD-V)?

Here you can find Hardware-Assisted Virtualization Detection Tool ( http://www.microsoft.com/downloads/en/details.aspx?FamilyID=0ee2a17f-8538-4619-8d1c-05d27e11adb2&displaylang=en) which will tell you if your hardware supports VT-x.

Alternatively you can find your processor here: http://ark.intel.com/Default.aspx. All AMD processors since 2006 supports Virtualization.

See the code below, adapted from this article, which demonstrates the simplest example code I could find. It includes both file and memory (faster) uploads.

public HttpResponseMessage Post()
{
    var httpRequest = HttpContext.Current.Request;
    if (httpRequest.Files.Count < 1)
    {
        return Request.CreateResponse(HttpStatusCode.BadRequest);
    }

    foreach(string file in httpRequest.Files)
    {
        var postedFile = httpRequest.Files[file];
        var filePath = HttpContext.Current.Server.MapPath("~/" + postedFile.FileName);
        postedFile.SaveAs(filePath);
        // NOTE: To store in memory use postedFile.InputStream
    }

    return Request.CreateResponse(HttpStatusCode.Created);
}

You use an implicit operator that converts the string value to a struct value:

public struct MyStruct {
  public string s;
  public int length;

  public static implicit operator MyStruct(string value) {
    return new MyStruct() { s = value, length = value.Length };
  }

}

Example:

MyStruct myStruct = "Lol";
Console.WriteLine(myStruct.s);
Console.WriteLine(myStruct.length);

Output:

Lol
3

A simplest working example based on the other answers is the following:

from flask import Flask, request
app = Flask(__name__, static_url_path='')

@app.route('/index/')
def root():
    return app.send_static_file('index.html')

if __name__ == '__main__':
  app.run(debug=True)

With the HTML called index.html:

<!DOCTYPE html>
<html>
<head>
    <title>Hello World!</title>
</head>
<body>
    <div>
         <p>
            This is a test.
         </p>
    </div>
</body>
</html>

IMPORTANT: And index.html is in a folder called static, meaning <projectpath> has the .py file, and <projectpath>\static has the html file.

If you want the server to be visible on the network, use app.run(debug=True, host='0.0.0.0')

EDIT: For showing all files in the folder if requested, use this

@app.route('/<path:path>')
def static_file(path):
    return app.send_static_file(path)

Which is essentially BlackMamba's answer, so give them an upvote.

This worked for me. With the method mentioned here I was able to draw polylines on Google Maps V2. I drew a new line whenever the user location got changed, so the the polyline looks like the path followed by user on map.

Source code at. Github: prasang7/eTaxi-Meter

Please ignore other modules of this project related to distance calculation and User Interface if you are not interested in them.

Most of bootstrap datepickers as I write this answer are rather buggy when included in Bootstrap 4. In my view the least code adding solution is a jQuery plugin. I used this one https://plugins.jquery.com/datetimepicker/ - you can see its usage here: https://xdsoft.net/jqplugins/datetimepicker/ It sure is not as smooth as the whole BS interface, but it only requires its css and js files along with jQuery which is already included in bootstrap.

Since 12,200 people have looked at this question and not got an answer:

DFSORT and SyncSort are the predominant Mainframe sorting products. Their control cards have many similarities, and some differences.

JOINKEYS FILE=F1,FIELDS=(key1startpos,7,A)              
JOINKEYS FILE=F2,FIELDS=(key2startpos,7,A)              
JOIN UNPAIRED,F1,F2
REFORMAT FIELDS=(F1:1,5200,F2:1,5200)                         
SORT FIELDS=COPY    

A "JOINKEYS" is made of three Tasks. Sub-Task 1 is the first JOINKEYS. Sub-Task 2 is the second JOINKEYS. The Main Task follows and is where the joined data is processed. In the example above it is a simple COPY operation. The joined data will simply be written to SORTOUT.

The JOIN statement defines that as well as matched records, UNPAIRED F1 and F2 records are to be presented to the Main Task.

The REFORMAT statement defines the record which will be presented to the Main Task. A more efficient example, imagining that three fields are required from F2, is:

 REFORMAT FIELDS=(F1:1,5200,F2:1,10,30,1,5100,100)

Each of the fields on F2 is defined with a start position and a length.

The record which is then processed by the Main task is 5311 bytes long, and the fields from F2 can be referenced by 5201,10,5211,1,5212,100 with the F1 record being 1,5200.

A better way achieve the same thing is to reduce the size of F2 with JNF2CNTL.

//JNF2CNTL DD *
  INREC BUILD=(207,1,10,30,1,5100,100)

Some installations of SyncSort do not support JNF2CNTL, and even where supported (from Syncsort MFX for z/OS release 1.4.1.0 onwards), it is not documented by SyncSort. For users of 1.3.2 or 1.4.0 an update is available from SyncSort to provide JNFnCNTL support.

It should be noted that JOINKEYS by default SORTs the data, with option EQUALS. If the data for a JOINKEYS file is already in sequence, SORTED should be specified. For DFSORT NOSEQCHK can also be specified if sequence-checking is not required.

 JOINKEYS FILE=F1,FIELDS=(key1startpos,7,A),SORTED,NOSEQCHK

Although the request is strange, as the source file won't be able to be determined, all unmatched records are to go to a separate output file.

With DFSORT, there is a matching-marker, specified with ? in the REFORMAT:

 REFORMAT FIELDS=(F1:1,5200,F2:1,10,30,1,5100,100,?)

This increases the length of the REFORMAT record by one byte. The ? can be specified anywhere on the REFORMAT record, and need not be specified. The ? is resolved by DFSORT to: B, data sourced from Both files; 1, unmatched record from F1; 2, unmatched record from F2.

SyncSort does not have the match marker. The absence or presence of data on the REFORMAT record has to be determined by values. Pick a byte on both input records which cannot contain a particular value (for instance, within a number, decide on a non-numeric value). Then specify that value as the FILL character on the REFORMAT.

 REFORMAT FIELDS=(F1:1,5200,F2:1,10,30,1,5100,100),FILL=C'$'

If position 1 on F1 cannot naturally have "$" and position 20 on F2 cannot either, then those two positions can be used to establish the result of the match. The entire record can be tested if necessary, but sucks up more CPU time.

The apparent requirement is for all unmatched records, from either F1 or F2, to be written to one file. This will require a REFORMAT statement which includes both records in their entirety:

DFSORT, output unmatched records:

  REFORMAT FIELDS=(F1:1,5200,F2:1,5200,?)

  OUTFIL FNAMES=NOMATCH,INCLUDE=(10401,1,SS,EQ,C'1,2'),
        IFTHEN=(WHEN=(10401,1,CH,EQ,C'1'),
                    BUILD=(1,5200)),
        IFTHEN=(WHEN=NONE,
                    BUILD=(5201,5200))

SyncSort, output unmatched records:

  REFORMAT FIELDS=(F1:1,5200,F2:1,5200),FILL=C'$'

  OUTFIL FNAMES=NOMATCH,INCLUDE=(1,1,CH,EQ,C'$',
                          OR,5220,1,CH,EQ,C'$'),
        IFTHEN=(WHEN=(1,1,CH,EQ,C'$'),
                    BUILD=(1,5200)),
        IFTHEN=(WHEN=NONE,
                    BUILD=(5201,5200))

The coding for SyncSort will also work with DFSORT.

To get the matched records written is easy.

  OUTFIL FNAMES=MATCH,SAVE

SAVE ensures that all records not written by another OUTFIL will be written here.

There is some reformatting required, to mainly output data from F1, but to select some fields from F2. This will work for either DFSORT or SyncSort:

  OUTFIL FNAMES=MATCH,SAVE,
     BUILD=(1,50,10300,100,51,212,5201,10,263,8,5230,1,271,4929)

The whole thing, with arbitrary starts and lengths is:

DFSORT

  JOINKEYS FILE=F1,FIELDS=(1,7,A)              
  JOINKEYS FILE=F2,FIELDS=(20,7,A)    

  JOIN UNPAIRED,F1,F2

  REFORMAT FIELDS=(F1:1,5200,F2:1,5200,?)                         

  SORT FIELDS=COPY    

  OUTFIL FNAMES=NOMATCH,INCLUDE=(10401,1,SS,EQ,C'1,2'),
        IFTHEN=(WHEN=(10401,1,CH,EQ,C'1'),
                    BUILD=(1,5200)),
        IFTHEN=(WHEN=NONE,
                    BUILD=(5201,5200))

  OUTFIL FNAMES=MATCH,SAVE,
     BUILD=(1,50,10300,100,51,212,5201,10,263,8,5230,1,271,4929)

SyncSort

  JOINKEYS FILE=F1,FIELDS=(1,7,A)              
  JOINKEYS FILE=F2,FIELDS=(20,7,A)              

  JOIN UNPAIRED,F1,F2

  REFORMAT FIELDS=(F1:1,5200,F2:1,5200),FILL=C'$'                         

  SORT FIELDS=COPY    

  OUTFIL FNAMES=NOMATCH,INCLUDE=(1,1,CH,EQ,C'$',
                          OR,5220,1,CH,EQ,C'$'),
        IFTHEN=(WHEN=(1,1,CH,EQ,C'$'),
                    BUILD=(1,5200)),
        IFTHEN=(WHEN=NONE,
                    BUILD=(5201,5200))

  OUTFIL FNAMES=MATCH,SAVE,
     BUILD=(1,50,10300,100,51,212,5201,10,263,8,5230,1,271,4929)

Andy E is correct that there is no HTML-based way to do this*; but if you are willing to use Flash, you can do it. The following works reliably on systems that have Flash installed. If your app needs to work on iPhone, then of course you'll need a fallback HTML-based solution.

* (Update 4/22/2013: HTML does now support this, in HTML5. See the other answers.)

Flash uploading also has other advantages -- Flash gives you the ability to show a progress bar as the upload of a large file progresses. (I'm pretty sure that's how Gmail does it, by using Flash behind the scenes, although I may be wrong about that.)

Here is a sample Flex 4 app that allows the user to pick a file, and then displays it:

<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" 
               xmlns:s="library://ns.adobe.com/flex/spark" 
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
               creationComplete="init()">
    <fx:Declarations>
        <!-- Place non-visual elements (e.g., services, value objects) here -->
    </fx:Declarations>
    <s:Button x="10" y="10" label="Choose file..." click="showFilePicker()" />
    <mx:Image id="myImage" x="9" y="44"/>
    <fx:Script>
        <![CDATA[
            private var fr:FileReference = new FileReference();

            // Called when the app starts.
            private function init():void
            {
                // Set up event handlers.
                fr.addEventListener(Event.SELECT, onSelect);
                fr.addEventListener(Event.COMPLETE, onComplete);
            }

            // Called when the user clicks "Choose file..."
            private function showFilePicker():void
            {
                fr.browse();
            }

            // Called when fr.browse() dispatches Event.SELECT to indicate
            // that the user has picked a file.
            private function onSelect(e:Event):void
            {
                fr.load(); // start reading the file
            }

            // Called when fr.load() dispatches Event.COMPLETE to indicate
            // that the file has finished loading.
            private function onComplete(e:Event):void
            {
                myImage.data = fr.data; // load the file's data into the Image
            }
        ]]>
    </fx:Script>
</s:Application>

Outside of the direct answers here, one should note the other key difference between python 2 and 3. The official python wiki goes into almost all of the major differences and focuses on when you should use either of the versions. This blog post also does a fine job of explaining the current python universe and the somehow unsolved puzzle of moving to python 3.

As far as I can tell, you are beginning to learn the python language. You should consider the aforementioned articles before you continue down the python 3 route. Not only will you have to change some of your syntax, you will also need to think about which packages will be available to you (an advantage of python 2) and potential optimizations that could be made in your code (an advantage of python 3).

This can also become an issue after enabling IIS 6 Management Compatibility in windows 10. Setting the framework HTTP Activation under WCF Services will fix the problem.

I've collected all the answers on this question and came up with function to detect if Android is running on a vm/emulator:

public boolean isvm(){


        StringBuilder deviceInfo = new StringBuilder();
        deviceInfo.append("Build.PRODUCT " +Build.PRODUCT +"\n");
        deviceInfo.append("Build.FINGERPRINT " +Build.FINGERPRINT+"\n");
        deviceInfo.append("Build.MANUFACTURER " +Build.MANUFACTURER+"\n");
        deviceInfo.append("Build.MODEL " +Build.MODEL+"\n");
        deviceInfo.append("Build.BRAND " +Build.BRAND+"\n");
        deviceInfo.append("Build.DEVICE " +Build.DEVICE+"\n");
        String info = deviceInfo.toString();


        Log.i("LOB", info);


        Boolean isvm = false;
        if(
                "google_sdk".equals(Build.PRODUCT) ||
                "sdk_google_phone_x86".equals(Build.PRODUCT) ||
                "sdk".equals(Build.PRODUCT) ||
                "sdk_x86".equals(Build.PRODUCT) ||
                "vbox86p".equals(Build.PRODUCT) ||
                Build.FINGERPRINT.contains("generic") ||
                Build.MANUFACTURER.contains("Genymotion") ||
                Build.MODEL.contains("Emulator") ||
                Build.MODEL.contains("Android SDK built for x86")
                ){
            isvm =  true;
        }


        if(Build.BRAND.contains("generic")&&Build.DEVICE.contains("generic")){
            isvm =  true;
        }

        return isvm;
    }

Tested on Emulator, Genymotion and Bluestacks (1 October 2015).

With some little changes to hobodave's code, here is a codesnippet you can use to crawl pages. This needs the curl extension to be enabled in your server.

<?php
//set_time_limit (0);
function crawl_page($url, $depth = 5){
$seen = array();
if(($depth == 0) or (in_array($url, $seen))){
    return;
}   
$ch = curl_init();
curl_setopt($ch, CURLOPT_URL, $url);
curl_setopt($ch, CURLOPT_TIMEOUT, 30);
curl_setopt($ch, CURLOPT_RETURNTRANSFER,1);
$result = curl_exec ($ch);
curl_close ($ch);
if( $result ){
    $stripped_file = strip_tags($result, "<a>");
    preg_match_all("/<a[\s]+[^>]*?href[\s]?=[\s\"\']+"."(.*?)[\"\']+.*?>"."([^<]+|.*?)?<\/a>/", $stripped_file, $matches, PREG_SET_ORDER ); 
    foreach($matches as $match){
        $href = $match[1];
            if (0 !== strpos($href, 'http')) {
                $path = '/' . ltrim($href, '/');
                if (extension_loaded('http')) {
                    $href = http_build_url($href , array('path' => $path));
                } else {
                    $parts = parse_url($href);
                    $href = $parts['scheme'] . '://';
                    if (isset($parts['user']) && isset($parts['pass'])) {
                        $href .= $parts['user'] . ':' . $parts['pass'] . '@';
                    }
                    $href .= $parts['host'];
                    if (isset($parts['port'])) {
                        $href .= ':' . $parts['port'];
                    }
                    $href .= $path;
                }
            }
            crawl_page($href, $depth - 1);
        }
}   
echo "Crawled {$href}";
}   
crawl_page("http://www.sitename.com/",3);
?>

I have explained this tutorial in this crawler script tutorial

For Future Readers

I love to work with Volley. To save development time i tried to write small handy library Gloxey Netwok Manager to setup Volley with my project. It includes JSON parser and different other methods that helps to check network availability.

Use ConnectionManager.class in which different methods for Volley String and Volley JSON request are available. You can make requests of GET, PUT, POST, DELETE with or without header. You can read full documentation here.

Just put this line in your gradle file.

  dependencies { 

       compile 'io.gloxey.gnm:network-manager:1.0.1'
   }

Volley StringRequest

Method GET (without header)

    ConnectionManager.volleyStringRequest(context, isDialog, progressDialogView, requestURL, volleyResponseInterface);

How to use?

     Configuration                Description

     Context                      Context 
     isDialog                     If true dialog will appear, otherwise not.
     progressView                 For custom progress view supply your progress view id and make isDialog true. otherwise pass null. 
     requestURL                   Pass your API URL.  
     volleyResponseInterface      Callback for response.  

Example

    ConnectionManager.volleyStringRequest(this, false, null, "url", new VolleyResponse() {
    @Override
    public void onResponse(String _response) {

        /**
         * Handle Response
         */
    }

    @Override
     public void onErrorResponse(VolleyError error) {

        /**
         * handle Volley Error
         */
    }

    @Override
    public void isNetwork(boolean connected) {

        /**
         * True if internet is connected otherwise false
         */
    }
});

Volley StringRequest

Method POST/PUT/DELETE (without header)

    ConnectionManager.volleyStringRequest(context, isDialog, progressDialogView, requestURL, requestMethod, params, volleyResponseInterface);

Example

Use Method : Request.Method.POST
             Request.Method.PUT
             Request.Method.DELETE

Your params : 

HashMap<String, String> params = new HashMap<>();
params.put("param 1", "value");
params.put("param 2", "value");

ConnectionManager.volleyStringRequest(this, true, null, "url", Request.Method.POST, params, new VolleyResponse() {
    @Override
    public void onResponse(String _response) {

        /**
         * Handle Response
         */
    }

    @Override
    public void onErrorResponse(VolleyError error) {

        /**
         * handle Volley Error
         */
    }

    @Override
    public void isNetwork(boolean connected) {

        /**
         * True if internet is connected otherwise false
         */
    }
});

Bonus

Gloxey JSON Parser

Feel free to use gloxey json parser to parse your api response.

  YourModel yourModel = GloxeyJsonParser.getInstance().parse(stringResponse, YourModel.class);

Example

ConnectionManager.volleyStringRequest(this, false, null, "url", new VolleyResponse() {
    @Override
    public void onResponse(String _response) {

        /**
         * Handle Response
         */

         try {

          YourModel yourModel = GloxeyJsonParser.getInstance().parse(_response, YourModel.class);

            } catch (Exception e) {
                e.printStackTrace();
            }

    }

    @Override
     public void onErrorResponse(VolleyError error) {

        /**
         * handle Volley Error
         */
         if (error instanceof TimeoutError || error instanceof NoConnectionError) {

                showSnackBar(parentLayout, getString(R.string.internet_not_found), getString(R.string.retry), new View.OnClickListener() {
                    @Override
                    public void onClick(View view) {

                     //handle retry button

                    }
                });

            } else if (error instanceof AuthFailureError) {
            } else if (error instanceof ServerError) {
            } else if (error instanceof NetworkError) {
            } else if (error instanceof ParseError) {
            }

    }

    @Override
    public void isNetwork(boolean connected) {

        /**
         * True if internet is connected otherwise false
         */
          if (!connected) {
                showSnackBar(parentLayout, getString(R.string.internet_not_found), getString(R.string.retry), new View.OnClickListener() {
                    @Override
                    public void onClick(View view) {
                        //Handle retry button
                    }
                });
    }
});


     public void showSnackBar(View view, String message) {
            Snackbar.make(view, message, Snackbar.LENGTH_LONG).show();
     }

     public void showSnackBar(View view, String message, String actionText, View.OnClickListener onClickListener) {
            Snackbar.make(view, message, Snackbar.LENGTH_LONG).setAction(actionText, onClickListener).show();
     }

Update the Maven project:

Steps:

1. Right-click on "project"
2. Go to "Maven" >> "Update"
3. Wait for all the changes to be applied
4. Commit the changes (if code is on repo)
5. Run

My take on this for future people watching this:

This could also happen if you're using: <? instead of <?php.

Some receivers expect EOL sequence, which is typically two characters \r\n, so try in your code replace the line

unsigned char cmd[] = {'I', 'N', 'I', 'T', ' ', '\r', '\0'};

with

unsigned char cmd[] = "INIT\r\n";

BTW, the above way is probably more efficient. There is no need to quote every character.

I've seen a bit of conversation about scale types so I decided to put together an article regarding some of the most popular content mode scaling types.

The associated image is here:

You cannot assign an rvalue to an rvalue.

if (strcmp("hello", "hello") = 0)

is wrong. Suggestions:

if (strcmp("hello", "hello") == 0)
                              ^

= is the assign operator.
== is the equal to operator.
I know many new programmers are confused with this fact.

I know what you mean, you want to trigger handleChange by click button.

But modify state value will not trigger onChange event, because onChange event is a form element event.

I have found simpler solution:

$('#clickToCreate').live('click', function() {
     $('#yourDialogId')
         .dialog({
              title: "Set the title to Create"
         })
         .dialog('open'); 
});


$('#clickToEdit').live('click', function() {
     $('#yourDialogId')
         .dialog({
              title: "Set the title To Edit"
         })
         .dialog('open'); 
});

Hope that helps!

Assuming you only want to disallow strings that match the regex completely (i.e., mmbla is okay, but mm isn't), this is what you want:

^(?!(?:m{2}|t)$).*$

(?!(?:m{2}|t)$) is a negative lookahead; it says "starting from the current position, the next few characters are not mm or t, followed by the end of the string." The start anchor (^) at the beginning ensures that the lookahead is applied at the beginning of the string. If that succeeds, the .* goes ahead and consumes the string.

FYI, if you're using Java's matches() method, you don't really need the the ^ and the final $, but they don't do any harm. The $ inside the lookahead is required, though.

Here are the steps:

--> Follow the path: {tomcat directory>/conf -->Find this line:

<Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" />

change portnumber from "8080" to "80".

--> Save the file.

--> Restart the server :)

I removed whole css under in head, which was loading colors and images for error/highlighting messages in page.And the website is working fine now.

There are many other binaries that need to be linked so I think it's much better to try something like sudo update-alternatives --all and choosing the right alternatives for everything else besides java and javac.

The Problem

Indexes visible in a web browser for directories that do not contain an index.html or index.php file.

I had a lot of trouble with the configuration on Scientific Linux's httpd web server to stop showing these indexes.

The Configuration that did not work

httpd.conf virtual host directory directives:

<Directory /home/mydomain.com/htdocs>
    Options FollowSymLinks
    AllowOverride all
    Require all granted
</Directory>

and the addition of the following line to .htaccess:

Options -Indexes

Directory indexes were still showing up. .htaccess settings weren't working!

How could that be, other settings in .htaccess were working, so why not this one? What's going? It should be working! %#$&^$%@# !!

The Fix

Change httpd.conf's Options line to:

Options +FollowSymLinks

and restart the webserver.

From Apache's core mod page: ( https://httpd.apache.org/docs/2.4/mod/core.html#options )

Mixing Options with a + or - with those without is not valid syntax and will be rejected during server startup by the syntax check with an abort.

Voilà directory indexes were no longer showing up for directories that did not contain an index.html or index.php file.

Now What! A New Wrinkle

New entries started to show up in the 'error_log' when such a directory access was attempted:

[Fri Aug 19 02:57:39.922872 2016] [autoindex:error] [pid 12479] [client aaa.bbb.ccc.ddd:xxxxx] AH01276: Cannot serve directory /home/mydomain.com/htdocs/dir-without-index-file/: No matching DirectoryIndex (index.html,index.php) found, and server-generated directory index forbidden by Options directive

This entry is from the Apache module 'autoindex' with a LogLevel of 'error' as indicated by [autoindex:error] of the error message---the format is [module_name:loglevel].

To stop these new entries from being logged, the LogLevel needs to be changed to a higher level (e.g. 'crit') to log fewer---only more serious error messages.

Apache 2.4 LogLevels

See Apache 2.4's core directives for LogLevel.

emerg, alert, crit, error, warn, notice, info, debug, trace1, trace2, trace3, tracr4, trace5, trace6, trace7, trace8

Each level deeper into the list logs all the messages of any previous level(s).

Apache 2.4's default level is 'warn'. Therefore, all messages classified as emerg, alert, crit, error, and warn are written to error_log.

Additional Fix to Stop New error_log Entries

Added the following line inside the <Directory>..</Directory> section of httpd.conf:

LogLevel crit

The Solution 1

My virtual host's httpd.conf <Directory>..</Directory> configuration:

<Directory /home/mydomain.com/htdocs>
    Options +FollowSymLinks
    AllowOverride all
    Require all granted
    LogLevel crit
</Directory>

and adding to /home/mydomain.com/htdocs/.htaccess, the root directory of your website's .htaccess file:

Options -Indexes

If you don't mind the 'error' level messages, omit

LogLevel crit

Scientific Linux - Solution 2 - Disables mod_autoindex

No more autoindex'ing of directories inside your web space. No changes to .htaccess. But, need access to the httpd configuration files in /etc/httpd

1. Edit /etc/httpd/conf.modules.d/00-base.conf and comment the line:

   LoadModule autoindex_module modules/mod_autoindex.so
   

   by adding a # in front of it then save the file.

2. In the directory /etc/httpd/conf.d rename (mv)

   sudo mv autoindex.conf autoindex.conf.<something_else>
   

3. Restart httpd:

   sudo httpd -k restart
   

   or

   sudo apachectl restart
   

The autoindex_mod is now disabled.

Linux distros with ap2dismod/ap2enmod Commands

Disable autoindex module enter the command

    sudo a2dismod autoindex

to enable autoindex module enter

    sudo a2enmod autoindex

If the tables (or at least a key column) are of the same type just make the union first and then count.

select count(*) 
  from (select tab1key as key from schema.tab1 
        union all 
        select tab2key as key from schema.tab2
       )

Or take your satement and put another sum() around it.

select sum(amount) from
(
select count(*) amount from schema.tab1 union all select count(*) amount from schema.tab2
)

Though this is old, I'm updating it for others who might find this question when searching later.

@Matt Kelliher:

Using the css :before and a data-* attribute for the list is a great idea, but can be modified slightly to be more handicap accessible as well:

HTML:

<ul aria-label="Vehicle Models Available:"> 
    <li>Dodge Shadow</li>
    <li>Ford Focus</li>
    <li>Chevy Lumina</li>
</ul>

CSS:

ul:before{
    content:attr(aria-label);
    font-size:120%;
    font-weight:bold;
    margin-left:-15px;
}

This will make a list with the "header" pseudo element above it with text set to the value in the aria-label attribute. You can then easily style it to your needs.

The benefit of this over using a data-* attribute is that aria-label will be read off by screen readers as a "label" for the list, which is semantically correct for your intended use of this data.

Note: IE8 supports :before attributes, but must use the single colon version (and must have a valid doctype defined). IE7 does not support :before, but Modernizer or Selectivizr should fix that issue for you. All modern browsers support the older :before syntax, but prefer that the ::before syntax be used. Generally the best way to handle this is to have an external stylesheet for IE7/8 that uses the old format and a general stylesheet using the new format, but in practice, most just use the old single colon format since it is still 100% cross browser, even if not technically valid for CSS3.

This website has some nice examples for using spring's RestTemplate. Here is a code example of how it can work to get a simple object:

private static void getEmployees()
{
    final String uri = "http://localhost:8080/springrestexample/employees.xml";

    RestTemplate restTemplate = new RestTemplate();
    String result = restTemplate.getForObject(uri, String.class);

    System.out.println(result);
}

Use Double.parseDouble(String a) what you are looking for is not an integer as it is not a whole number.

On Xcode 8 (8A218a):

Swift:

textField.clearButtonMode = UITextField.ViewMode.whileEditing;

The "W" went from capital to non-cap "w".

You should place below line

btn.Click = btn.Click + btn1_Click;

If it is a string then use the built in float on it to do the conversion for instance: print( "%.5f" % float("1.43572e-03")) answer:0.00143572

select directory_path from dba_directories where upper(directory_name) = 'CSVDIR'

The code below creates a Documents directory and then a sub-directory for the application and saved the files to it.

public class loadDataTooDisk extends AsyncTask<String, Integer, String> {
    String sdCardFileTxt;
    @Override
    protected String doInBackground(String... params)
    {

        //check to see if external storage is avalibel
        checkState();
        if(canW == canR == true)
        {
            //get the path to sdcard 
            File pathToExternalStorage = Environment.getExternalStorageDirectory();
            //to this path add a new directory path and create new App dir (InstroList) in /documents Dir
            File appDirectory = new File(pathToExternalStorage.getAbsolutePath()  + "/documents/InstroList");
            // have the object build the directory structure, if needed.
            appDirectory.mkdirs();
            //test to see if it is a Text file
            if ( myNewFileName.endsWith(".txt") )
            {

                //Create a File for the output file data
                File saveFilePath = new File (appDirectory, myNewFileName);
                //Adds the textbox data to the file
                try{
                    String newline = "\r\n";
                    FileOutputStream fos = new FileOutputStream (saveFilePath);
                    OutputStreamWriter OutDataWriter  = new OutputStreamWriter(fos);

                    OutDataWriter.write(equipNo.getText() + newline);
                    // OutDataWriter.append(equipNo.getText() + newline);
                    OutDataWriter.append(equip_Type.getText() + newline);
                    OutDataWriter.append(equip_Make.getText()+ newline);
                    OutDataWriter.append(equipModel_No.getText()+ newline);
                    OutDataWriter.append(equip_Password.getText()+ newline);
                    OutDataWriter.append(equipWeb_Site.getText()+ newline);
                    //OutDataWriter.append(equipNotes.getText());
                    OutDataWriter.close();

                    fos.flush();
                    fos.close();

                }catch(Exception e){
                    e.printStackTrace();
                }
            }
        }
        return null;
    }
}

This one builds the file name

   private String BuildNewFileName()
    { // creates a new filr name
        Time today = new Time(Time.getCurrentTimezone());
        today.setToNow();

        StringBuilder sb = new StringBuilder();

        sb.append(today.year + "");                // Year)
        sb.append("_");
        sb.append(today.monthDay + "");          // Day of the month (1-31)
        sb.append("_");
        sb.append(today.month + "");              // Month (0-11))
        sb.append("_");
        sb.append(today.format("%k:%M:%S"));      // Current time
        sb.append(".txt");                      //Completed file name

        myNewFileName = sb.toString();
        //Replace (:) with (_)
        myNewFileName = myNewFileName.replaceAll(":", "_");

        return myNewFileName;
    }

Hope this helps! It took me a long time to get it working.

As of 2018, there is also iText7 (A next iteration of old iTextSharp library) and its HTML to PDF package available: itext7.pdfhtml

Usage is straightforward:

HtmlConverter.ConvertToPdf(
    new FileInfo(@"Path\to\Html\File.html"),
    new FileInfo(@"Path\to\Pdf\File.pdf")
);

Method has many more overloads.

Update: iText* family of products has dual licensing model: free for open source, paid for commercial use.

You can use the target argument in the Thread constructor to directly pass in a function that gets called instead of run.

The documentation (https://angular.io/guide/template-syntax#!#star-template) gives the following example. Say we have template code like this:

<hero-detail *ngIf="currentHero" [hero]="currentHero"></hero-detail>

Before it will be rendered, it will be "de-sugared". That is, the asterix notation will be transcribed to the notation:

<template [ngIf]="currentHero">
  <hero-detail [hero]="currentHero"></hero-detail>
</template>

If 'currentHero' is truthy this will be rendered as

<hero-detail> [...] </hero-detail>

But what if you want an conditional output like this:

<h1>Title</h1><br>
<p>text</p>

.. and you don't want the output be wrapped in a container.

You could write the de-sugared version directly like so:

<template [ngIf]="showContent">
  <h1>Title</h1>
  <p>text</p><br>
</template>

And this will work fine. However, now we need ngIf to have brackets [] instead of an asterix *, and this is confusing (https://github.com/angular/angular.io/issues/2303)

For that reason a different notation was created, like so:

<ng-container *ngIf="showContent"><br>
  <h1>Title</h1><br>
  <p>text</p><br>
</ng-container>

Both versions will produce the same results (only the h1 and p tag will be rendered). The second one is preferred because you can use *ngIf like always.

No, how you are doing it is correct.

http://www.w3.org/MarkUp/html-spec/html-spec_8.html#SEC8.2.2

Thanks @Clint for the great answer:

Just wanted to highlight how easy it was to solve this using the Expando Object:

    var dynamicObject = new ExpandoObject() as IDictionary<string, Object>;
    foreach (var property in properties) {
        dynamicObject.Add(property.Key,property.Value);
    }

Example 2 on w3schools shows what you are trying to achieve.

<?php
header("Content-type:application/pdf");

// It will be called downloaded.pdf
header("Content-Disposition:attachment;filename='downloaded.pdf'");

// The PDF source is in original.pdf
readfile("original.pdf");
?>

Also remember that,

It is important to notice that header() must be called before any actual output is sent (In PHP 4 and later, you can use output buffering to solve this problem)

test -e will test whether a file exists or not. The test command returns a zero value if the test succeeds or 1 otherwise.

Test can be written either as test -e or using []

[ -e "$file_name" ] && grep "poet" $file_name

Unless you actually need the output of grep you can test the return value as grep will return 1 if there are no matches and zero if there are any.

In general terms you can test if a string is non-empty using [ "string" ] which will return 0 if non-empty and 1 if empty

Simple Upload Form

 <script>_x000D_
   //form Submit_x000D_
   $("form").submit(function(evt){  _x000D_
      evt.preventDefault();_x000D_
      var formData = new FormData($(this)[0]);_x000D_
   $.ajax({_x000D_
       url: 'fileUpload',_x000D_
       type: 'POST',_x000D_
       data: formData,_x000D_
       async: false,_x000D_
       cache: false,_x000D_
       contentType: false,_x000D_
       enctype: 'multipart/form-data',_x000D_
       processData: false,_x000D_
       success: function (response) {_x000D_
         alert(response);_x000D_
       }_x000D_
   });_x000D_
   return false;_x000D_
 });_x000D_
</script>

<!--Upload Form-->_x000D_
<form>_x000D_
  <table>_x000D_
    <tr>_x000D_
      <td colspan="2">File Upload</td>_x000D_
    </tr>_x000D_
    <tr>_x000D_
      <th>Select File </th>_x000D_
      <td><input id="csv" name="csv" type="file" /></td>_x000D_
    </tr>_x000D_
    <tr>_x000D_
      <td colspan="2">_x000D_
        <input type="submit" value="submit"/> _x000D_
      </td>_x000D_
    </tr>_x000D_
  </table>_x000D_
</form>

Simple code for reading file in JAVA:

import java.io.*;

class ReadData
{
    public static void main(String args[])
    {
        FileReader fr = new FileReader(new File("<put your file path here>"));
        while(true)
        {
            int n=fr.read();
            if(n>-1)
            {
                char ch=(char)fr.read();
                System.out.print(ch);
            }
        }
    }
}

window.scrollTo(0,1);

this will help you but this javascript is may not work in all browsers

Both of the options you provided are the same. Both of them will still point to the same object in memory and have the same array values. You should treat the state object as immutable as you said, however you need to re-create the array so its pointing to a new object, set the new item, then reset the state. Example:

onChange(event){
    var newArray = this.state.arr.slice();    
    newArray.push("new value");   
    this.setState({arr:newArray})
}

If you want to disable first(formcontrol) then you can use below statement.

this.form.first.disable();

I've had great success with wsdl2php. It will automatically create wrapper classes for all objects and methods used in your web service.

This means the Xcode you are using is not compatible with the iOS version on the device. (You have updated iOS on the device, but have not updated Xcode.)

Open the App Store app and update Xcode.

If there aren't any updates - go here and download the latest version (not beta) of Xcode.

After hours of googling: No, it's not possible without JavaScript. The animation-iteration-count: 1; is internally saved in the animation shothand attribute, which gets resetted and overwritten on :hover. When we blur the <a> and release the :hover the old class reapplies and therefore again resets the animation attribute.

There sadly is no way to save a certain attribute states across element states.

You'll have to use JavaScript.

It is possible to have hierarchical branch names (branch names with slash). For example in my repository I have such branch(es). One caveat is that you can't have both branch 'foo' and branch 'foo/bar' in repository.

Your problem is not with creating branch with slash in name.

$ git branch foo/bar
error: unable to resolve reference refs/heads/labs/feature: Not a directory
fatal: Failed to lock ref for update: Not a directory

The above error message talks about 'labs/feature' branch, not 'foo/bar' (unless it is a mistake in copy'n'paste, i.e you edited parts of session). What is the result of git branch or git rev-parse --symbolic-full-name HEAD?

This can be done with an input element of a type "submit". This will appear as a button to the user and clicking the button will send the form.

<form action="" method="post">
    <input type="submit" name="upvote" value="Upvote" />
</form>

Here is a special case that might be good enough:

 [ (1.0/divStep)*x for x in range(start*divStep, stop*divStep)]

In your case this would be:

#for(float x = 0; x < 10; x += 0.5f) { /* ... */ } ==>
start = 0
stop  = 10
divstep = 1/.5 = 2 #This needs to be int, thats why I said 'special case'

and so:

>>> [ .5*x for x in range(0*2, 10*2)]
[0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5]

var newItem = document.createElement("LI");       // Create a <li> node
var textnode = document.createTextNode("Water");  // Create a text node
newItem.appendChild(textnode);                    // Append the text to <li>

var list = document.getElementById("myList");    // Get the <ul> element to insert a new node
list.insertBefore(newItem, list.childNodes[0]);  // Insert <li> before the first child of <ul>

https://www.w3schools.com/jsref/met_node_insertbefore.asp

I recommend adding the following line after the export to PDF:

ThisWorkbook.Sheets("Sheet1").Select

(where eg. Sheet1 is the single sheet you want to be active afterwards)

Leaving multiple sheets in a selected state may cause problems executing some code. (eg. unprotect doesn't function properly when multiple sheets are actively selected.)

In phpMyAdmin v.4.6.5.2 there's a checkbox option "The first line of the file contains the table column names...." :

isEmpty()

      Returns true if this list contains no elements.

http://docs.oracle.com/javase/1.4.2/docs/api/java/util/List.html

I really hate to put long HTML inside of the attribute, here is my solution, clear and simple (replace ? with whatever you want):

<a class="btn-lg popover-dismiss" data-placement="bottom" data-toggle="popover" title="Help">
    <h2>Some title</h2>
    Some text
</a>

then

var help = $('.popover-dismiss');
help.attr('data-content', help.html()).text(' ? ').popover({trigger: 'hover', html: true});

Some of your dependencies are likely signed jarfiles. When you combine them all into one big jarfile, the corresponding signature files are still present, and no longer match the "big combined" jarfile, so the runtime halts thinking the jar file has been tampered with (which it...has so to speak).

Assuming you're using ant, you can solve the problem by eliminating the signature files from your jarfile dependencies. Unfortunately, it's not possible to do this in one step in ant.

However, I was able to get this working with Ant in two steps, without specifically naming each jarfile dependency, by using:

<target name="jar" depends="compile" description="Create one big jarfile.">
    <jar jarfile="${output.dir}/deps.jar">
        <zipgroupfileset dir="jars">
            <include name="**/*.jar" />
        </zipgroupfileset>
    </jar>
    <sleep seconds="1" />
    <jar jarfile="${output.dir}/myjar.jar" basedir="${classes.dir}">
        <zipfileset src="${output.dir}/deps.jar" excludes="META-INF/*.SF" />
        <manifest>
            <attribute name="Main-Class" value="com.mycompany.MyMain" />
        </manifest>
    </jar>
</target>

The sleep element is supposed to prevent errors about files with modification dates in the future.

Other variations I found in the linked threads didn't work for me.

From msdn:

The order of the returned file names is not guaranteed; use the Sort() method if a specific sort order is required.

The Sort() method is the standard Array.Sort(), which takes in IComparables (among other overloads), so if you sort by creation date, it will handle localization based on the machine settings.

Well, L is for language, but it doesn't imply programming language. After all, English or French are (natural) languages too! ;-)

As said above, put them under a subsidiary section, Technology seems to be a good term.

(Looking at my own resume, not updated in a while) I have made a section just called "Languages", so I can't get wrong... :-D
I have put "(X)HTML and CSS, XML/DTD/Schema and SVG" at the end of the section, clearly separated.

In French, I have a section "Langages" (programming and markup) and another "Langues" (French/English). In the English version, I titled both at "Languages", which is clumsy now that I think of it, although context clarify this. I should find a better formulation.

Google Closure has a nice function for this... goog.object.getCount(obj)

look at goog.Object Documentation

If none of the above work, I also have a different approach, as it happened to me in a real scenario.

More specifically using auto-generated Ruby files from Thrift.

In my situation, I had a Module with several classes, so the order is important in this case:

Class A makes use of Class B in the same module. However, Class B was declared after Class A.

Simply making Class B to be declared before Class A solved the issue to me.

Prevent Default

Calling preventDefault() during any stage of event flow cancels the event, meaning that any default action normally taken by the implementation as a result of the event will not occur. You can use Event.

return false

return false inside a callback prevents the default behaviour. For example, in a submit event, it doesn't submit the form. return false also stops bubbling, so the parents of the element won't know the event occurred. return false is equivalent to event.preventDefault() + event.stopPropagation()

Just as a normal js object:

let myhash: IHash = {};   

myhash["somestring"] = "value"; //set

let value = myhash["somestring"]; //get

There are two things you're doing with [indexer: string] : string

• tell TypeScript that the object can have any string-based key
• that for all key entries the value MUST be a string type.

You can make a general dictionary with explicitly typed fields by using [key: string]: any;

e.g. age must be number, while name must be a string - both are required. Any implicit field can be any type of value.

As an alternative, there is a Map class:

let map = new Map<object, string>(); 

let key = new Object();

map.set(key, "value");
map.get(key); // return "value"

This allows you have any Object instance (not just number/string) as the key.

Although its relatively new so you may have to polyfill it if you target old systems.

You are catching the error but then you are re throwing it. You should try and handle it more gracefully, otherwise your user is going to see 500, internal server, errors.

You may want to send back a response telling the user what went wrong as well as logging the error on your server.

I am not sure exactly what errors the request might return, you may want to return something like.

router.get("/emailfetch", authCheck, async (req, res) => {
  try {
    let emailFetch = await gmaiLHelper.getEmails(req.user._doc.profile_id , '/messages', req.user.accessToken)
      emailFetch = emailFetch.data
      res.send(emailFetch)
   } catch(error) {
      res.status(error.response.status)
      return res.send(error.message);
    })

})

This code will need to be adapted to match the errors that you get from the axios call.

I have also converted the code to use the try and catch syntax since you are already using async.

Method1: ADD_MONTHS

ADD_MONTHS(SYSDATE, -6)

Method 2: Interval

SYSDATE - interval '6' month

Note: if you want to do the operations from start of the current month always, TRUNC(SYSDATE,'MONTH') would give that. And it expects a Date datatype as input.

If your using eclipse with tomcat follow the below steps

1. On server window Double click on tomcat, It will open the tomcat's Overview window .

2. In the Overview window you will find Open launch configuration under General information and click on Open launch configuration.

3. In the edit Configuration window look for Arguments and click on It.
4. In the arguments tag look for VM arguments.
5. simply paste this -Xms256m -Xmx512m -XX:PermSize=256m -XX:MaxPermSize=512m to the end of the arguments.

The new constraint is fine, but if you need T being a value type too, use this:

protected T GetObject() {
    if (typeof(T).IsValueType || typeof(T) == typeof(string)) {
        return default(T);
    } else {
       return (T)Activator.CreateInstance(typeof(T));
    }
}

You can try with

 setRequestedOrientation(ActivityInfo.SCREEN_ORIENTATION_LANDSCAPE);

Swift 3.0

Create a ViewController with the UITableViewDelegate and UITableViewDataSource protocols. Then create a tableView inside it, declaring its style to be UITableViewStyle.grouped. This will fix the headers.

lazy var tableView: UITableView = {
    let view = UITableView(frame: UIScreen.main.bounds, style: UITableViewStyle.grouped)
    view.delegate = self
    view.dataSource = self
    view.separatorStyle = .none
    return view
}()

from behave import *
from selenium import webdriver
from selenium.webdriver.common.by import By
from selenium.webdriver.support.wait import WebDriverWait
from selenium.webdriver.support import expected_conditions as ec
import pandas as pd
import requests
from bs4 import BeautifulSoup
from tabulate import tabulate

class readTableDataFromDB: 
    def LookupValueFromColumnSingleKey(context, tablexpath, rowName, columnName):
        print("element present readData From Table")
        element = context.driver.find_elements_by_xpath(tablexpath+"/descendant::th")
        indexrow = 1
        indexcolumn = 1
        for values in element:
            valuepresent = values.text
            print("text present here::"+valuepresent+"rowName::"+rowName)
            if valuepresent.find(columnName) != -1:
                 print("current row"+str(indexrow) +"value"+valuepresent)
                 break
            else:
                 indexrow = indexrow+1    

        indexvalue = context.driver.find_elements_by_xpath(
            tablexpath+"/descendant::tr/td[1]")
        for valuescolumn in indexvalue:
            valuepresentcolumn = valuescolumn.text
            print("Team text present here::" +
                  valuepresentcolumn+"columnName::"+rowName)
            print(indexcolumn) 
            if valuepresentcolumn.find(rowName) != -1:
                print("current column"+str(indexcolumn) +
                      "value"+valuepresentcolumn)
                break
            else:
                indexcolumn = indexcolumn+1

        print("index column"+str(indexcolumn))
        print(tablexpath +"//descendant::tr["+str(indexcolumn)+"]/td["+str(indexrow)+"]")
        #lookupelement = context.driver.find_element_by_xpath(tablexpath +"//descendant::tr["+str(indexcolumn)+"]/td["+str(indexrow)+"]")
        #print(lookupelement.text)
        return context.driver.find_elements_by_xpath(tablexpath+"//descendant::tr["+str(indexcolumn)+"]/td["+str(indexrow)+"]")

    def LookupValueFromColumnTwoKeyssss(context, tablexpath, rowName, columnName, columnName1):
        print("element present readData From Table")
        element = context.driver.find_elements_by_xpath(
            tablexpath+"/descendant::th")
        indexrow = 1
        indexcolumn = 1
        indexcolumn1 = 1
        for values in element:
            valuepresent = values.text
            print("text present here::"+valuepresent)
            indexrow = indexrow+1
            if valuepresent == columnName:
                print("current row value"+str(indexrow)+"value"+valuepresent)
                break

        for values in element:
            valuepresent = values.text
            print("text present here::"+valuepresent)
            indexrow = indexrow+1
            if valuepresent.find(columnName1) != -1:
                print("current row value"+str(indexrow)+"value"+valuepresent)
                break

        indexvalue = context.driver.find_elements_by_xpath(
            tablexpath+"/descendant::tr/td[1]")
        for valuescolumn in indexvalue:
            valuepresentcolumn = valuescolumn.text
            print("Team text present here::"+valuepresentcolumn)
            print(indexcolumn)
            indexcolumn = indexcolumn+1
            if valuepresent.find(rowName) != -1:
                print("current column"+str(indexcolumn) +
                      "value"+valuepresentcolumn)
                break
        print("indexrow"+str(indexrow))
        print("index column"+str(indexcolumn))
        lookupelement = context.driver.find_element_by_xpath(
            tablexpath+"//descendant::tr["+str(indexcolumn)+"]/td["+str(indexrow)+"]")
        print(tablexpath +
              "//descendant::tr["+str(indexcolumn)+"]/td["+str(indexrow)+"]")
        print(lookupelement.text)
        return context.driver.find_element_by_xpath(tablexpath+"//descendant::tr["+str(indexrow)+"]/td["+str(indexcolumn)+"]")

Try this:

re.compile(r"^(.+)\n((?:\n.+)+)", re.MULTILINE)

I think your biggest problem is that you're expecting the ^ and $ anchors to match linefeeds, but they don't. In multiline mode, ^ matches the position immediately following a newline and $ matches the position immediately preceding a newline.

Be aware, too, that a newline can consist of a linefeed (\n), a carriage-return (\r), or a carriage-return+linefeed (\r\n). If you aren't certain that your target text uses only linefeeds, you should use this more inclusive version of the regex:

re.compile(r"^(.+)(?:\n|\r\n?)((?:(?:\n|\r\n?).+)+)", re.MULTILINE)

BTW, you don't want to use the DOTALL modifier here; you're relying on the fact that the dot matches everything except newlines.

If you need to float value as well:

NSString* formattedNumber = [NSString stringWithFormat:@"%.02f", myFloat];
float floatTwoDecimalDigits = atof([formattedNumber UTF8String]);

If you define a class without any constructor, the compiler will synthesize a constructor for you (and that will be a default constructor -- i.e., one that doesn't require any arguments). If, however, you do define a constructor, (even if it does take one or more arguments) the compiler will not synthesize a constructor for you -- at that point, you've taken responsibility for constructing objects of that class, so the compiler "steps back", so to speak, and leaves that job to you.

You have two choices. You need to either provide a default constructor, or you need to supply the correct parameter when you define an object. For example, you could change your constructor to look something like:

Blowfish(BlowfishAlgorithm algorithm = CBC);

...so the ctor could be invoked without (explicitly) specifying an algorithm (in which case it would use CBC as the algorithm).

The other alternative would be to explicitly specify the algorithm when you define a Blowfish object:

class GameCryptography { 
    Blowfish blowfish_;
public:
    GameCryptography() : blowfish_(ECB) {}
    // ...
};

In C++ 11 (or later) you have one more option available. You can define your constructor that takes an argument, but then tell the compiler to generate the constructor it would have if you didn't define one:

class GameCryptography { 
public:

    // define our ctor that takes an argument
    GameCryptography(BlofishAlgorithm); 

    // Tell the compiler to do what it would have if we didn't define a ctor:
    GameCryptography() = default;
};

As a final note, I think it's worth mentioning that ECB, CBC, CFB, etc., are modes of operation, not really encryption algorithms themselves. Calling them algorithms won't bother the compiler, but is unreasonably likely to cause a problem for others reading the code.

Something like this works:

input + label::after {_x000D_
  content: 'click my input';_x000D_
  color: black;_x000D_
}_x000D_
_x000D_
input:focus + label::after {_x000D_
  content: 'not valid yet';_x000D_
  color: red;_x000D_
}_x000D_
_x000D_
input:valid + label::after {_x000D_
  content: 'looks good';_x000D_
  color: green;_x000D_
}

<input id="input" type="number" required />_x000D_
<label for="input"></label>

Then add some floats or positioning to order stuff.

In order to set textColor, BottomNavigationView has two style properties you can set directly from the xml:

• itemTextAppearanceActive
• itemTextAppearanceInactive

In your layout.xml file:

<com.google.android.material.bottomnavigation.BottomNavigationView
            android:id="@+id/bnvMainNavigation"
            style="@style/NavigationView"/>
  

In your styles.xml file:

    <style name="NavigationView" parent="Widget.MaterialComponents.BottomNavigationView">
      <item name="itemTextAppearanceActive">@style/ActiveText</item>
      <item name="itemTextAppearanceInactive">@style/InactiveText</item>
    </style>
    <style name="ActiveText">
      <item name="android:textColor">@color/colorPrimary</item>
    </style>
    <style name="InactiveText">
      <item name="android:textColor">@color/colorBaseBlack</item>
    </style>

If someone is using react, following will be useful:

https://stackoverflow.com/a/62111884/1015678

const valueSetter = Object.getOwnPropertyDescriptor(this.textInputRef, 'value').set;
const prototype = Object.getPrototypeOf(this.textInputRef);
const prototypeValueSetter = Object.getOwnPropertyDescriptor(prototype, 'value').set;
if (valueSetter && valueSetter !== prototypeValueSetter) {
    prototypeValueSetter.call(this.textInputRef, 'new value');
} else {
    valueSetter.call(this.textInputRef, 'new value');
}
this.textInputRef.dispatchEvent(new Event('input', { bubbles: true }));

google.maps.event.trigger($("#div_ID")[0], 'resize');

If you don't have variable map available, it should be the first element (unless you did something stupid) in the div that contains GMAP.

Using this code for Navigating next viewcontroller,if you are using storyboard means follow this below code,

UIStoryboard *board;

if (!self.storyboard)
{
    board = [UIStoryboard storyboardWithName:@"Main" bundle:nil];
}
else
{
    board = self.storyboard;
}

ViewController *View = [board instantiateViewControllerWithIdentifier:@"yourstoryboardname"];
[self.navigationController pushViewController:View animated:YES];

Though this question is rather old and has already been answered, I just want to add a note on how to do proper exception handling in C++11:

Use std::nested_exception and std::throw_with_nested

It is described on StackOverflow here and here, how you can get a backtrace on your exceptions inside your code without need for a debugger or cumbersome logging, by simply writing a proper exception handler which will rethrow nested exceptions.

Since you can do this with any derived exception class, you can add a lot of information to such a backtrace! You may also take a look at my MWE on GitHub, where a backtrace would look something like this:

Library API: Exception caught in function 'api_function'
Backtrace:
~/Git/mwe-cpp-exception/src/detail/Library.cpp:17 : library_function failed
~/Git/mwe-cpp-exception/src/detail/Library.cpp:13 : could not open file "nonexistent.txt"

As I was not able to solve my problem by suggested ways, I will share how I fixed it.

First of all, even if I was able to activate an environment, the corresponding environment folder was not present in C:\ProgramData\Anaconda3\envs directory.

So I created a new anaconda environment using Anaconda prompt, a new folder named same as your given environment name will be created in the envs folder.

Next, I activated that environment in Anaconda prompt. Installed python with conda install python command.

Then on anaconda navigator, selected the newly created environment in the 'Applications on' menu. Launched vscode through Anaconda navigator.

Now as suggested by other answers, in vscode, opened command palette with Ctrl + Shift + P keyboard shortcut. Searched and selected Python: Select Interpreter

If the interpreter with newly created environment isn't listed out there, select Enter Interpreter Path and choose the newly created python.exe which is located similar to C:\ProgramData\Anaconda3\envs\<your-new-env>\ . So the total path will look like C:\ProgramData\Anaconda3\envs\<your-nev-env>\python.exe

Next time onwards the interpreter will be automatically listed among other interpreters.

Now you might see your selected conda environment at bottom left side in vscode.

I have google search many ways to import csv to mysql, include " load data infile ", use mysql workbench, etc.

when I use mysql workbench import button, first you need to create the empty table on your own, set each column type on your own. Note: you have to add ID column at the end as primary key and not null and auto_increment, otherwise, the import button will not visible at later. However, when I start load CSV file, nothing loaded, seems like a bug. I give up.

Lucky, the best easy way so far I found is to use Oracle's mysql for excel. you can download it from here mysql for excel

This is what you are going to do: open csv file in excel, at Data tab, find mysql for excel button

select all data, click export to mysql. Note to set a ID column as primary key.

when finished, go to mysql workbench to alter the table, such as currency type should be decimal(19,4) for large amount decimal(10,2) for regular use. other field type may be set to varchar(255).

The other answers are correct, but if you are trying to make a list of functions, each with a different parameter, that can be executed later, the following code will do that:

import functools
a = [functools.partial(lambda x: x*x, x) for x in range(10)]

b = []
for i in a:
    b.append(i())

In [26]: b
Out[26]: [0, 1, 4, 9, 16, 25, 36, 49, 64, 81]

While the example is contrived, I found it useful when I wanted a list of functions that each print something different, i.e.

import functools
a = [functools.partial(lambda x: print(x), x) for x in range(10)]

for i in a:
    i()

I know this is years later but I ran into the same problem. The solution I found was to change the window title in main.cpp. I guess once the w.show(); is called the window title can no longer be changed. In my case I just wanted the title to reflect the current directory and it works.

int main(int argc, char *argv[]) 
{
QApplication a(argc, argv);
MainWindow w;
w.setWindowTitle(QDir::currentPath());
w.show();

return a.exec();
}

If the JSON data in your array is sorted in some way, there are a variety of searches you could implement. However, if you're not dealing with a lot of data then you're probably going to be fine with an O(n) operation here (as you have). Anything else would probably be overkill.

Similar situation. It was working. Then, I started to include pytables. At first view, no reason to errors. I decided to use another function, that has a domain constraint (elipse) and received the following error:

TypeError: 'numpy.float64' object cannot be interpreted as an integer

or

TypeError: 'numpy.float64' object is not iterable

The crazy thing: the previous function I was using, no code changed, started to return the same error. My intermediary function, already used was:

def MinMax(x, mini=0, maxi=1)
    return max(min(x,mini), maxi)

The solution was avoid numpy or math:

def MinMax(x, mini=0, maxi=1)
    x = [x_aux if x_aux > mini else mini for x_aux in x]
    x = [x_aux if x_aux < maxi else maxi for x_aux in x]
    return max(min(x,mini), maxi)

Then, everything calm again. It was like one library possessed max and min!

I prefer to install the PowerShell Community Extensions and just use the Get-FileVersionInfo function that it provides.

Like so:

Get-FileVersionInfo MyAssembly.dll

with output like:

ProductVersion   FileVersion      FileName
--------------   -----------      --------
1.0.2907.18095   1.0.2907.18095   C:\Path\To\MyAssembly.dll

I've used it against an entire directory of assemblies with great success.

$Group is an object, but you will actually need to check if $Group.samaccountname.StartsWith("string").

Change $Group.StartsWith("S_G_") to $Group.samaccountname.StartsWith("S_G_").

People have already talked about [JsonIgnore] being added to the virtual property in the class, for example:

[JsonIgnore]
public virtual Project Project { get; set; }

I will also share another option, [JsonProperty(NullValueHandling = NullValueHandling.Ignore)] which omits the property from serialization only if it is null:

[JsonProperty(NullValueHandling = NullValueHandling.Ignore)]
public virtual Project Project { get; set; }

The high spike that you have is due to the DC (non-varying, i.e. freq = 0) portion of your signal. It's an issue of scale. If you want to see non-DC frequency content, for visualization, you may need to plot from the offset 1 not from offset 0 of the FFT of the signal.

Modifying the example given above by @PaulH

import numpy as np
import matplotlib.pyplot as plt
import scipy.fftpack

# Number of samplepoints
N = 600
# sample spacing
T = 1.0 / 800.0
x = np.linspace(0.0, N*T, N)
y = 10 + np.sin(50.0 * 2.0*np.pi*x) + 0.5*np.sin(80.0 * 2.0*np.pi*x)
yf = scipy.fftpack.fft(y)
xf = np.linspace(0.0, 1.0/(2.0*T), N/2)

plt.subplot(2, 1, 1)
plt.plot(xf, 2.0/N * np.abs(yf[0:N/2]))
plt.subplot(2, 1, 2)
plt.plot(xf[1:], 2.0/N * np.abs(yf[0:N/2])[1:])

The output plots:

Another way, is to visualize the data in log scale:

Using:

plt.semilogy(xf, 2.0/N * np.abs(yf[0:N/2]))

Will show:

This should work:

public static final byte[] intToByteArray(int value) {
    return new byte[] {
            (byte)(value >>> 24),
            (byte)(value >>> 16),
            (byte)(value >>> 8),
            (byte)value};
}

Code taken from here.

Edit An even simpler solution is given in this thread.

I read so many blogs and tried so many tricks but my problem not resolved. I was able to run the code but not able to generate the jar file. :( Sad..

But I tried something which might be very silly but worked for me and bought eclipse on trace. What I did was.. Just deleted the main method from the class. Saved it. Did undo to bring the main class back. Tada... Issue resolved... Just one think would like to say, keep your eclipse in "Build Autometically" mode.

Other answers already pointed out that the representation of floating numbers is a thorny issue, to say the least.

Since you don't give enough context in your question, I cannot know if the decimal module can be useful for your needs:

http://docs.python.org/library/decimal.html

Among other things you can explicitly specify the precision that you wish to obtain (from the docs):

>>> getcontext().prec = 6
>>> Decimal('3.0')
Decimal('3.0')
>>> Decimal('3.1415926535')
Decimal('3.1415926535')
>>> Decimal('3.1415926535') + Decimal('2.7182818285')
Decimal('5.85987')
>>> getcontext().rounding = ROUND_UP
>>> Decimal('3.1415926535') + Decimal('2.7182818285')
Decimal('5.85988')

A simple example from my prompt (python 2.6):

>>> import decimal
>>> a = decimal.Decimal('10.000000001')
>>> a
Decimal('10.000000001')
>>> print a
10.000000001
>>> b = decimal.Decimal('10.00000000000000000000000000900000002')
>>> print b
10.00000000000000000000000000900000002
>>> print str(b)
10.00000000000000000000000000900000002
>>> len(str(b/decimal.Decimal('3.0')))
29

Maybe this can help? decimal is in python stdlib since 2.4, with additions in python 2.6.

Hope this helps, Francesco

The best approach depends on the expected key distribution and number of collisions. If relatively few collisions are expected, it really doesn't matter which method is used. If lots of collisions are expected, then which to use depends on the cost of rehashing or probing vs. manipulating the extensible bucket data structure.

But here is source code example of An Hashmap Implementation in C

Rewrite your method signature so that it accepts HttpServletResponse as a parameter, so that you can call setStatus(int) on it.

http://static.springsource.org/spring/docs/3.0.x/spring-framework-reference/html/mvc.html#mvc-ann-requestmapping-arguments

If you authenticate your clients with Oauth2 I think you will need underscore for at least two of your parameter names:

• client_id
• client_secret

I have used camelCase in my (not yet published) REST API. While writing the API documentation I have been thinking of changing everything to snake_case so I don't have to explain why the Oauth params are snake_case while other params are not.

See: https://tools.ietf.org/html/rfc6749

Reflection.

using System.Reflection;

Vendor vendor = new Vendor();
object tag = vendor.Tag;

Type tagt = tag.GetType();
FieldInfo field = tagt.GetField("test");

string value = field.GetValue(tag);

Use the power wisely. Don't forget error checking. :)

In jQuery you can trigger a click like this:

$('#foo').trigger('click');

More here:

http://api.jquery.com/trigger/

If you want to do the same using prototype, it looks like this:

$('foo').simulate('click');

We can eliminate the unnecessary file read/write by using text. My complete solution is the following:

proc1 = ['/bin/bash', '-c', 
  "/usr/bin/git ls-remote --heads ssh://repo_url.git"].execute()
proc2 = ['/bin/bash', '-c', 
  "/usr/bin/awk ' { gsub(/refs\\/heads\\//, \"\"); print \$2 }' "].execute()
all = proc1 | proc2

choices = all.text
return choices.split().toList();

The number is held in an int[] - the maximum size of an array is Integer.MAX_VALUE. So the maximum BigInteger probably is (2 ^ 32) ^ Integer.MAX_VALUE.

Admittedly, this is implementation dependent, not part of the specification.

In Java 8, some information was added to the BigInteger javadoc, giving a minimum supported range and the actual limit of the current implementation:

BigInteger must support values in the range -2Integer.MAX_VALUE (exclusive) to +2Integer.MAX_VALUE (exclusive) and may support values outside of that range.

Implementation note: BigInteger constructors and operations throw ArithmeticException when the result is out of the supported range of -2Integer.MAX_VALUE (exclusive) to +2Integer.MAX_VALUE (exclusive).

if((Type == 2 && PageCount == 0) || (Type == 2 && PageCount == '')) {

        PageCount= document.getElementById('<%=hfPageCount.ClientID %>').value;
}

This could be one of possible solutions, so 'or' is || not !!

It sounds like you are doing everything exactly as the client credential section of the Subversion book suggests. The only thing I can think of is that the server isn't asking for the username and password because is getting it from somewhere else.

Gradle looks for gradle.properties files in these places:

• in project build dir (that is where your build script is)
• in sub-project dir
• in gradle user home (defined by the GRADLE_USER_HOME environment variable, which if not set defaults to USER_HOME/.gradle)

Properties from one file will override the properties from the previous ones (so file in gradle user home has precedence over the others, and file in sub-project has precedence over the one in project root).

Reference: https://gradle.org/docs/current/userguide/build_environment.html

Use json_decode to transform your JSON into a PHP array. Example:

$json = '{"a":"b"}';
$array = json_decode($json, true);
echo $array['a']; // b

I think the docs aren't wonderful at exposing how to do this. It has been a supported feature for some time, however, and there are some details in this pull request.

So there are three different ways to do this:

Option A) Create a new session with the profile

    dev = boto3.session.Session(profile_name='dev')

Option B) Change the profile of the default session in code

    boto3.setup_default_session(profile_name='dev')

Option C) Change the profile of the default session with an environment variable

    $ AWS_PROFILE=dev ipython
    >>> import boto3
    >>> s3dev = boto3.resource('s3')

Dim myRow() As Data.DataRow
myRow = dt.Select("MyColumnName = 'SomeColumnTitle'")
myRow(0)("SomeOtherColumnTitle") = strValue

Code above instantiates a DataRow. Where "dt" is a DataTable, you get a row by selecting any column (I know, sounds backwards). Then you can then set the value of whatever row you want (I chose the first row, or "myRow(0)"), for whatever column you want.

You add your ActionListener twice to button. So correct your code for button2 to

  JButton button2 = new JButton("hello agin2");
  panel.add(button2);
  button2.addActionListener (new Action2());//note the button2 here instead of button

Furthermore, perform your Swing operations on the correct thread by using EventQueue.invokeLater

If you want to get values in Javascript on frontend, you can use the native way to do it by using :

document.getElementsByName("movie")[0].value;

Where "movie" is the name of your input <input type="text" name="movie">

If you want to get it on angular.js controller, you can use;

$scope.movie

You can't actually do the job quite right with toLowerCase, either on a string or in a character. The problem is that there are variant glyphs in either upper or lower case, and depending on whether you uppercase or lowercase your glyphs may or may not be preserved. It's not even clear what you mean when you say that two variants of a lower-case glyph are compared ignoring case: are they or are they not the same? (Note that there are also mixed-case glyphs: \u01c5, \u01c8, \u01cb, \u01f2 or ?, ?, ?, ?, but any method suggested here will work on those as long as they should count as the same as their fully upper or full lower case variants.)

There is an additional problem with using Char: there are some 80 code points not representable with a single Char that are upper/lower case variants (40 of each), at least as detected by Java's code point upper/lower casing. You therefore need to get the code points and change the case on these.

But code points don't help with the variant glyphs.

Anyway, here's a complete list of the glyphs that are problematic due to variants, showing how they fare against 6 variant methods:

1. Character toLowerCase
2. Character toUpperCase
3. String toLowerCase
4. String toUpperCase
5. String equalsIgnoreCase
6. Character toLowerCase(toUpperCase) (or vice versa)

For these methods, S means that the variants are treated the same as each other, D means the variants are treated as different from each other.

Behavior     Unicode                             Glyphs
===========  ==================================  =========
1 2 3 4 5 6  Upper  Lower  Var Up Var Lo Vr Lo2  U L u l l2
- - - - - -  ------ ------ ------ ------ ------  - - - - -
D D D D S S  \u0049 \u0069 \u0130 \u0131         I i I i   
S D S D S S  \u004b \u006b \u212a                K k K     
D S D S S S  \u0053 \u0073        \u017f         S s   ?   
D S D S S S  \u039c \u03bc        \u00b5         ? µ   µ   
S D S D S S  \u00c5 \u00e5 \u212b                Å å Å     
D S D S S S  \u0399 \u03b9        \u0345 \u1fbe  ? ?   ? ? 
D S D S S S  \u0392 \u03b2        \u03d0         ? ß   ?   
D S D S S S  \u0395 \u03b5        \u03f5         ? e   ?   
D D D D S S  \u0398 \u03b8 \u03f4 \u03d1         T ? ? ?   
D S D S S S  \u039a \u03ba        \u03f0         ? ?   ?   
D S D S S S  \u03a0 \u03c0        \u03d6         ? p   ?   
D S D S S S  \u03a1 \u03c1        \u03f1         ? ?   ?   
D S D S S S  \u03a3 \u03c3        \u03c2         S s   ?   
D S D S S S  \u03a6 \u03c6        \u03d5         F f   ?   
S D S D S S  \u03a9 \u03c9 \u2126                O ? ?     
D S D S S S  \u1e60 \u1e61        \u1e9b         ? ?   ?   

Complicating this still further is that there is no way to get the Turkish I's right (i.e. the dotted versions are different than the undotted versions) unless you know you're in Turkish; none of these methods give correct behavior and cannot unless you know the locale (i.e. non-Turkish: i and I are the same ignoring case; Turkish, not).

Overall, using toUpperCase gives you the closest approximation, since you have only five uppercase variants (or four, not counting Turkish).

You can also try to specifically intercept those five troublesome cases and call toUpperCase(toLowerCase(c)) on them alone. If you choose your guards carefully (just toUpperCase if c < 0x130 || c > 0x212B, then work through the other alternatives) you can get only a ~20% speed penalty for characters in the low range (as compared to ~4x if you convert single characters to strings and equalsIgnoreCase them) and only about a 2x penalty if you have a lot in the danger zone. You still have the locale problem with dotted I, but otherwise you're in decent shape. Of course if you can use equalsIgnoreCase on a larger string, you're better off doing that.

Here is sample Scala code that does the job:

def elevateCase(c: Char): Char = {
  if (c < 0x130 || c > 0x212B) Character.toUpperCase(c)
  else if (c == 0x130 || c == 0x3F4 || c == 0x2126 || c >= 0x212A)
    Character.toUpperCase(Character.toLowerCase(c))
  else Character.toUpperCase(c)
}

If you need to clear the values of $_SESSION, set the array equal to an empty array:

$_SESSION = array();

Of course, you can't access the values of $_SESSION on another page once you call session_destroy, so it doesn't matter that much.

Try the following:

session_destroy();
$_SESSION = array(); // Clears the $_SESSION variable

I know it is an old question but still wanted to share how i achieved this. Assuming state in constructor looks like this:

  constructor(props) {
    super(props);

    this.state = {
      loading: false,
      user: {
        email: ""
      },
      organization: {
        name: ""
      }
    };

    this.handleChange = this.handleChange.bind(this);
  }

My handleChange function is like this:

  handleChange(e) {
    const names = e.target.name.split(".");
    const value = e.target.type === "checkbox" ? e.target.checked : e.target.value;
    this.setState((state) => {
      state[names[0]][names[1]] = value;
      return {[names[0]]: state[names[0]]};
    });
  }

And make sure you name inputs accordingly:

<input
   type="text"
   name="user.email"
   onChange={this.handleChange}
   value={this.state.user.firstName}
   placeholder="Email Address"
/>

<input
   type="text"
   name="organization.name"
   onChange={this.handleChange}
   value={this.state.organization.name}
   placeholder="Organization Name"
/>

UrlScan can also remove the server header by using AlternateServerName= under [options].

PHP 7.2 moved completely away from Mcrypt and the encryption now is based on the maintainable Libsodium library.

All your encryption needs can be basically resolved through Libsodium library.

// On Alice's computer:
$msg = 'This comes from Alice.';
$signed_msg = sodium_crypto_sign($msg, $secret_sign_key);


// On Bob's computer:
$original_msg = sodium_crypto_sign_open($signed_msg, $alice_sign_publickey);
if ($original_msg === false) {
    throw new Exception('Invalid signature');
} else {
    echo $original_msg; // Displays "This comes from Alice."
}

Libsodium documentation: https://github.com/paragonie/pecl-libsodium-doc

For communication between node.js and Python server, I would use Unix sockets if both processes run on the same server and TCP/IP sockets otherwise. For marshaling protocol I would take JSON or protocol buffer. If threaded Python shows up to be a bottleneck, consider using Twisted Python, which provides the same event driven concurrency as do node.js.

If you feel adventurous, learn clojure (clojurescript, clojure-py) and you'll get the same language that runs and interoperates with existing code on Java, JavaScript (node.js included), CLR and Python. And you get superb marshalling protocol by simply using clojure data structures.

  **Error Case:**

var handler = function(parameters) {
  console.log(parameters);
}

(function() {     //IIFE
 // some code
})();

Output: TypeError: (intermediate value)(intermediate value) is not a function *How to Fix IT -> because you are missing semi colan(;) to separate expressions;

 **Fixed**


var handler = function(parameters) {
  console.log(parameters);
}; // <--- Add this semicolon(if you miss that semi colan .. 
   //error will occurs )

(function() {     //IIFE
 // some code
})();

why this error comes?? Reason : specific rules for automatic semicolon insertion which is given ES6 stanards

I suggest: Switch to Yarn! - Yarn is a package manager which uses the same package.json file and node_modules folder as npm.

With npm I had the same problem: On a CentOS 6 install I got the ERR cb() never called error repeatedly and could not find a way to make npm reliably complete installation of some packages (like webpack for example). - Yarn works flawlessly, even on flaky network connections.

Migration to Yarn is easy. Most subcommands are the same. They have a good Migration guide. Read on to the handy CLI commands comparison at the end.

Another solution (poor one do) is exiting VM Box with saving desktop (top option), restart would bring back the screen as it was before the rescale.

It's easy, you should set server http response header first. The problem is not with your front-end javascript code. You need to return this header:

Access-Control-Allow-Origin:*

or

Access-Control-Allow-Origin:your domain

In Apache config files, the code is like this:

Header set Access-Control-Allow-Origin "*"

In nodejs,the code is like this:

res.setHeader('Access-Control-Allow-Origin','*');

As @kosev said in his answer you can use JobIntentService. But I use an alternative solution - I catch IllegalStateException and start the service as foreground. For example, this function starts my service:

@JvmStatic
protected fun startService(intentAction: String, serviceType: Class<*>, intentExtraSetup: (Intent) -> Unit) {
    val context = App.context
    val intent = Intent(context, serviceType)
    intent.action = intentAction
    intentExtraSetup(intent)
    intent.putExtra(NEED_FOREGROUND_KEY, false)

    try {
        context.startService(intent)
    }
    catch (ex: IllegalStateException) {
        intent.putExtra(NEED_FOREGROUND_KEY, true)
        if(Build.VERSION.SDK_INT >= Build.VERSION_CODES.O) {
            context.startForegroundService(intent)
        }
        else {
            context.startService(intent)
        }
    }
}

and when I process Intent I do such thing:

override fun onHandleIntent(intent: Intent?) {
    val needToMoveToForeground = intent?.getBooleanExtra(NEED_FOREGROUND_KEY, false) ?: false
    if(needToMoveToForeground) {
        val notification = notificationService.createSyncServiceNotification()
        startForeground(notification.second, notification.first)

        isInForeground = true
    }

    intent?.let {
        getTask(it)?.process()
    }
}

If the primary key happens to be an auto_increment value, you have to remove the auto increment, then drop the primary key then re-add the auto-increment

ALTER TABLE `xx`
MODIFY `auto_increment_field` INT, 
DROP PRIMARY KEY, 
ADD PRIMARY KEY (new_primary_key);

then add back the auto increment

ALTER TABLE `xx` ADD INDEX `auto_increment_field` (auto_increment_field),
MODIFY `auto_increment_field` int auto_increment;

then set auto increment back to previous value

ALTER TABLE `xx` AUTO_INCREMENT = 5;

You can escape the square brackets with double backslashes like this:

$('input[name="pages_title\\[\\]"]')

To stage all manually deleted files you can use:

git rm $(git ls-files --deleted)

To add an alias to this command as git rm-deleted, run:

git config --global alias.rm-deleted '!git rm $(git ls-files --deleted)'

This feature is built into jqGrid.

setup your grid function as follows.

$('#myGrid').jqGrid({
   ...
   colNames: ['Manager', 'Name', 'HiddenSalary'],
   colModel: [               
               { name: 'Manager', editable: true },
               { name: 'Price', editable: true },
               { name: 'HiddenSalary', hidden: true , editable: true, 
                  editrules: {edithidden:true} 
               }
             ],
   ...
};

There are other editrules that can be applied but this basic setup would hide the manager's salary in the grid view but would allow editing when the edit form was displayed.

You can do it using jQuery. Example:

<script src="https://code.jquery.com/jquery-1.11.2.min.js"></script>

<script>
    $.ajax({
        url : "next.php",
        type: "POST",
        data : "name=Denniss",
        success: function(data)
        {
            //data - response from server
            $('#response_div').html(data);
        }
    });
</script>

Making alternate attempt to answer OP's question including e.preventDefault() calls:

Rendered link (ES6)

<a href="#link" onClick={(e) => this.handleSort(e, 'myParam')}>

Component Function

handleSort = (e, param) => {
  e.preventDefault();
  console.log('Sorting by: ' + param)
}

This work for me!

$(document).ready(function() {
    $(document).on("click", "#tableId tbody tr", function() {
        //some think
    });
});

The situation with regexes, Unicode, and Javascript sucks. It's ridiculous that programmers should have to rely on external libraries to recognize that "??fa" is a word, or even that "é" is a letter.

But so it goes.

This guy has written a good library for handling Unicode in Javascript Regexes:

http://blog.stevenlevithan.com/archives/javascript-regex-and-unicode

The Unicode stuff is a plugin to this regex library:

http://xregexp.com/

Here's a post about the Unicode extension:

http://blog.stevenlevithan.com/archives/xregexp-unicode-plugin

And the extension page itself:

http://xregexp.com/plugins/

Great work but it still bums me out that Javascript is so backwards in this regard.

(He wrote a book for O'Reilly about the topic so it's quite possible that he knows what he's talking about.)

The way he implemented it is by adding tables of characters with certain properties. Then, when you contruct a regex with his library, \p{charclass} gets replaced with [allthecharactersintheclass].

ln -s /Library/Developer/CommandLineTools/SDKs/MacOSX.sdk '/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk' might help you. It fixed my problem.

Click Insert ->Object->Create from file ->Browse.

Once the file is selected choose the "Change icon" option and you will be able to rename the file and change the icon if you wish.

Hope this helps!

First I want to correct Greg: function abc(){} is scoped too — the name abc is defined in the scope where this definition is encountered. Example:

function xyz(){
  function abc(){};
  // abc is defined here...
}
// ...but not here

Secondly, it is possible to combine both styles:

var xyz = function abc(){};

xyz is going to be defined as usual, abc is undefined in all browsers but Internet Explorer — do not rely on it being defined. But it will be defined inside its body:

var xyz = function abc(){
  // xyz is visible here
  // abc is visible here
}
// xyz is visible here
// abc is undefined here

If you want to alias functions on all browsers, use this kind of declaration:

function abc(){};
var xyz = abc;

In this case, both xyz and abc are aliases of the same object:

console.log(xyz === abc); // prints "true"

One compelling reason to use the combined style is the "name" attribute of function objects (not supported by Internet Explorer). Basically when you define a function like

function abc(){};
console.log(abc.name); // prints "abc"

its name is automatically assigned. But when you define it like

var abc = function(){};
console.log(abc.name); // prints ""

its name is empty — we created an anonymous function and assigned it to some variable.

Another good reason to use the combined style is to use a short internal name to refer to itself, while providing a long non-conflicting name for external users:

// Assume really.long.external.scoped is {}
really.long.external.scoped.name = function shortcut(n){
  // Let it call itself recursively:
  shortcut(n - 1);
  // ...
  // Let it pass itself as a callback:
  someFunction(shortcut);
  // ...
}

In the example above we can do the same with an external name, but it'll be too unwieldy (and slower).

(Another way to refer to itself is to use arguments.callee, which is still relatively long, and not supported in the strict mode.)

Deep down, JavaScript treats both statements differently. This is a function declaration:

function abc(){}

abc here is defined everywhere in the current scope:

// We can call it here
abc(); // Works

// Yet, it is defined down there.
function abc(){}

// We can call it again
abc(); // Works

Also, it hoisted through a return statement:

// We can call it here
abc(); // Works
return;
function abc(){}

This is a function expression:

var xyz = function(){};

xyz here is defined from the point of assignment:

// We can't call it here
xyz(); // UNDEFINED!!!

// Now it is defined
xyz = function(){}

// We can call it here
xyz(); // works

Function declaration vs. function expression is the real reason why there is a difference demonstrated by Greg.

Fun fact:

var xyz = function abc(){};
console.log(xyz.name); // Prints "abc"

Personally, I prefer the "function expression" declaration because this way I can control the visibility. When I define the function like

var abc = function(){};

I know that I defined the function locally. When I define the function like

abc = function(){};

I know that I defined it globally providing that I didn't define abc anywhere in the chain of scopes. This style of definition is resilient even when used inside eval(). While the definition

function abc(){};

depends on the context and may leave you guessing where it is actually defined, especially in the case of eval() — the answer is: It depends on the browser.

preg_replace("/[[:blank:]]+/"," ",$input)

If you don't want 'a' in the index

In :

col = ['a','b','c']

data = DataFrame([[1,2,3],[10,11,12],[20,21,22]],columns=col)

data

Out:

    a   b   c
0   1   2   3
1  10  11  12
2  20  21  22

In :

data2 = data.set_index('a')

Out:

     b   c
a
1    2   3
10  11  12
20  21  22

In :

data2.index.name = None

Out:

     b   c
 1   2   3
10  11  12
20  21  22

Here You Go with Fiddle:

FIDDLE

HTML:

<ol>
        <li>List 1          
            <ol>
                <li>Sub-Chapter</li>
                <li>Sub-Chapter</li>
            </ol>
        </li>
        <li>List 2
            <ol>
                <li>Sub-Chapter</li>
                <li>Sub-Chapter</li>
            </ol>
        </li>
        <li>List 3</li>
</ol>

CSS:

ol {counter-reset:item;}
ol li {display:block;}
li:before {content:counters(item, ".");counter-increment:item;left:-7px;position:relative;font-weight:bold;}

If one has to call pd.Series.between(l,r) repeatedly (for different bounds l and r), a lot of work is repeated unnecessarily. In this case, it's beneficial to sort the frame/series once and then use pd.Series.searchsorted(). I measured a speedup of up to 25x, see below.

def between_indices(x, lower, upper, inclusive=True):
    """
    Returns smallest and largest index i for which holds 
    lower <= x[i] <= upper, under the assumption that x is sorted.
    """
    i = x.searchsorted(lower, side="left" if inclusive else "right")
    j = x.searchsorted(upper, side="right" if inclusive else "left")
    return i, j

# Sort x once before repeated calls of between()
x = x.sort_values().reset_index(drop=True)
# x = x.sort_values(ignore_index=True) # for pandas>=1.0
ret1 = between_indices(x, lower=0.1, upper=0.9)
ret2 = between_indices(x, lower=0.2, upper=0.8)
ret3 = ...

Benchmark

Measure repeated evaluations (n_reps=100) of pd.Series.between() as well as the method based on pd.Series.searchsorted(), for different arguments lower and upper. On my MacBook Pro 2015 with Python v3.8.0 and Pandas v1.0.3, the below code results in the following outpu

# pd.Series.searchsorted()
# 5.87 ms ± 321 µs per loop (mean ± std. dev. of 7 runs, 100 loops each)
# pd.Series.between(lower, upper)
# 155 ms ± 6.08 ms per loop (mean ± std. dev. of 7 runs, 10 loops each)
# Logical expressions: (x>=lower) & (x<=upper)
# 153 ms ± 3.52 ms per loop (mean ± std. dev. of 7 runs, 10 loops each)

import numpy as np
import pandas as pd

def between_indices(x, lower, upper, inclusive=True):
    # Assumption: x is sorted.
    i = x.searchsorted(lower, side="left" if inclusive else "right")
    j = x.searchsorted(upper, side="right" if inclusive else "left")
    return i, j

def between_fast(x, lower, upper, inclusive=True):
    """
    Equivalent to pd.Series.between() under the assumption that x is sorted.
    """
    i, j = between_indices(x, lower, upper, inclusive)
    if True:
        return x.iloc[i:j]
    else:
        # Mask creation is slow.
        mask = np.zeros_like(x, dtype=bool)
        mask[i:j] = True
        mask = pd.Series(mask, index=x.index)
        return x[mask]

def between(x, lower, upper, inclusive=True):
    mask = x.between(lower, upper, inclusive=inclusive)
    return x[mask]

def between_expr(x, lower, upper, inclusive=True):
    if inclusive:
        mask = (x>=lower) & (x<=upper)
    else:
        mask = (x>lower) & (x<upper)
    return x[mask]

def benchmark(func, x, lowers, uppers):
    for l,u in zip(lowers, uppers):
        func(x,lower=l,upper=u)

n_samples = 1000
n_reps = 100
x = pd.Series(np.random.randn(n_samples))
# Sort the Series.
# For pandas>=1.0:
# x = x.sort_values(ignore_index=True)
x = x.sort_values().reset_index(drop=True)

# Assert equivalence of different methods.
assert(between_fast(x, 0, 1, True ).equals(between(x, 0, 1, True)))
assert(between_expr(x, 0, 1, True ).equals(between(x, 0, 1, True)))
assert(between_fast(x, 0, 1, False).equals(between(x, 0, 1, False)))
assert(between_expr(x, 0, 1, False).equals(between(x, 0, 1, False)))

# Benchmark repeated evaluations of between().
uppers = np.linspace(0, 3, n_reps)
lowers = -uppers
%timeit benchmark(between_fast, x, lowers, uppers)
%timeit benchmark(between, x, lowers, uppers)
%timeit benchmark(between_expr, x, lowers, uppers)

html2text is a Python program that does a pretty good job at this.

A web site for coloration with lots of languages. http://hilite.me/

You can host one yourself since it is open source. The code is on github.

jQuery 'fixes up' events to account for browser differences. When it does so, you can always access the 'native' event with event.originalEvent (see the Special Properties subheading on this page).

Here is a version of Matthew James Davis's answer with the Python tuple methods added in:

class Tuple extends Array { 
  constructor(...items) { 
    super(...items); 
    Object.freeze(this);
  }
  toArray() {
    return [...this];
  }
  toString() {
    return '('+super.toString()+')';
  }
  count(item) {
    var arr = this.toArray();
    var result = 0;
    for(var i = 0; i < arr.length; i++) {
       if(arr[i] === item) {
         result++;
       }
    }
    return result;
  }

  

  
}

   let tuple = new Tuple("Jim", 35);
   let [name,age] = tuple;

console.log("tuple:"+tuple)
console.log("name:"+name)
console.log("age:"+age)

In spark 2.2 there are two ways to add constant value in a column in DataFrame:

1) Using lit

2) Using typedLit.

The difference between the two is that typedLit can also handle parameterized scala types e.g. List, Seq, and Map

Sample DataFrame:

val df = spark.createDataFrame(Seq((0,"a"),(1,"b"),(2,"c"))).toDF("id", "col1")

+---+----+
| id|col1|
+---+----+
|  0|   a|
|  1|   b|
+---+----+

1) Using lit: Adding constant string value in new column named newcol:

import org.apache.spark.sql.functions.lit
val newdf = df.withColumn("newcol",lit("myval"))

Result:

+---+----+------+
| id|col1|newcol|
+---+----+------+
|  0|   a| myval|
|  1|   b| myval|
+---+----+------+

2) Using typedLit:

import org.apache.spark.sql.functions.typedLit
df.withColumn("newcol", typedLit(("sample", 10, .044)))

Result:

+---+----+-----------------+
| id|col1|           newcol|
+---+----+-----------------+
|  0|   a|[sample,10,0.044]|
|  1|   b|[sample,10,0.044]|
|  2|   c|[sample,10,0.044]|
+---+----+-----------------+

the emptyList method has this signature:

public static final <T> List<T> emptyList()

That <T> before the word List means that it infers the value of the generic parameter T from the type of variable the result is assigned to. So in this case:

List<String> stringList = Collections.emptyList();

The return value is then referenced explicitly by a variable of type List<String>, so the compiler can figure it out. In this case:

setList(Collections.emptyList());

There's no explicit return variable for the compiler to use to figure out the generic type, so it defaults to Object.

It's the same problem with managed and easy to use programming language as always - they are slow (and sometimes memory-eating).

These are languages to do control rather than processing. If I would have to write application to transform images and had to use Python too all the processing could be written in C++ and connected to Python via bindings while interface and process control would be definetely Python.

You can set the Property FormBorderStyle to none in the designer, or in code:

this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.None;

I configured the app.config with the tool for EntLib configuration and set up my LoggingConfiguration block. Then I copied this into the DotNetConfig.xsd. Of course, it does not cover all attributes, only the ones I added but it does not display those annoying info messages anymore.

<xs:element name="loggingConfiguration">
  <xs:complexType>
    <xs:sequence>
      <xs:element name="listeners">
        <xs:complexType>
          <xs:sequence>
            <xs:element maxOccurs="unbounded" name="add">
              <xs:complexType>
                <xs:attribute name="fileName" type="xs:string" use="required" />
                <xs:attribute name="footer" type="xs:string" use="required" />
                <xs:attribute name="formatter" type="xs:string" use="required" />
                <xs:attribute name="header" type="xs:string" use="required" />
                <xs:attribute name="rollFileExistsBehavior" type="xs:string" use="required" />
                <xs:attribute name="rollInterval" type="xs:string" use="required" />
                <xs:attribute name="rollSizeKB" type="xs:unsignedByte" use="required" />
                <xs:attribute name="timeStampPattern" type="xs:string" use="required" />
                <xs:attribute name="listenerDataType" type="xs:string" use="required" />
                <xs:attribute name="traceOutputOptions" type="xs:string" use="required" />
                <xs:attribute name="filter" type="xs:string" use="required" />
                <xs:attribute name="type" type="xs:string" use="required" />
                <xs:attribute name="name" type="xs:string" use="required" />
              </xs:complexType>
            </xs:element>
          </xs:sequence>
        </xs:complexType>
      </xs:element>
      <xs:element name="formatters">
        <xs:complexType>
          <xs:sequence>
            <xs:element name="add">
              <xs:complexType>
                <xs:attribute name="template" type="xs:string" use="required" />
                <xs:attribute name="type" type="xs:string" use="required" />
                <xs:attribute name="name" type="xs:string" use="required" />
              </xs:complexType>
            </xs:element>
          </xs:sequence>
        </xs:complexType>
      </xs:element>
      <xs:element name="logFilters">
        <xs:complexType>
          <xs:sequence>
            <xs:element name="add">
              <xs:complexType>
                <xs:attribute name="enabled" type="xs:boolean" use="required" />
                <xs:attribute name="type" type="xs:string" use="required" />
                <xs:attribute name="name" type="xs:string" use="required" />
              </xs:complexType>
            </xs:element>
          </xs:sequence>
        </xs:complexType>
      </xs:element>
      <xs:element name="categorySources">
        <xs:complexType>
          <xs:sequence>
            <xs:element maxOccurs="unbounded" name="add">
              <xs:complexType>
                <xs:sequence>
                  <xs:element name="listeners">
                    <xs:complexType>
                      <xs:sequence>
                        <xs:element name="add">
                          <xs:complexType>
                            <xs:attribute name="name" type="xs:string" use="required" />
                          </xs:complexType>
                        </xs:element>
                      </xs:sequence>
                    </xs:complexType>
                  </xs:element>
                </xs:sequence>
                <xs:attribute name="switchValue" type="xs:string" use="required" />
                <xs:attribute name="name" type="xs:string" use="required" />
              </xs:complexType>
            </xs:element>
          </xs:sequence>
        </xs:complexType>
      </xs:element>
      <xs:element name="specialSources">
        <xs:complexType>
          <xs:sequence>
            <xs:element name="allEvents">
              <xs:complexType>
                <xs:attribute name="switchValue" type="xs:string" use="required" />
                <xs:attribute name="name" type="xs:string" use="required" />
              </xs:complexType>
            </xs:element>
            <xs:element name="notProcessed">
              <xs:complexType>
                <xs:attribute name="switchValue" type="xs:string" use="required" />
                <xs:attribute name="name" type="xs:string" use="required" />
              </xs:complexType>
            </xs:element>
            <xs:element name="errors">
              <xs:complexType>
                <xs:sequence>
                  <xs:element name="listeners">
                    <xs:complexType>
                      <xs:sequence>
                        <xs:element name="add">
                          <xs:complexType>
                            <xs:attribute name="name" type="xs:string" use="required" />
                          </xs:complexType>
                        </xs:element>
                      </xs:sequence>
                    </xs:complexType>
                  </xs:element>
                </xs:sequence>
                <xs:attribute name="switchValue" type="xs:string" use="required" />
                <xs:attribute name="name" type="xs:string" use="required" />
              </xs:complexType>
            </xs:element>
          </xs:sequence>
        </xs:complexType>
      </xs:element>
    </xs:sequence>
    <xs:attribute name="name" type="xs:string" use="required" />
    <xs:attribute name="tracingEnabled" type="xs:boolean" use="required" />
    <xs:attribute name="defaultCategory" type="xs:string" use="required" />
    <xs:attribute name="logWarningsWhenNoCategoriesMatch" type="xs:boolean" use="required" />
  </xs:complexType>
</xs:element>

for (int k = 1; k < 100; k++) {
    TableRow row = new TableRow(this);

    innerloop:
    for (int l = 1; l < 4; l++) {
        btn = new Button(this);
        TableRow.LayoutParams tr = new TableRow.LayoutParams(LayoutParams.WRAP_CONTENT, LayoutParams.WRAP_CONTENT);
        layout.setWeightSum(12.0f);
        tr.weight = 0;
        btn.setLayoutParams(tr); 
        btn.setTextColor(a);
        btn.setHeight(150);

        btn.setWidth(150);
        btn.setId(idb);
        btn.setText("Button " + idb);
        row.addView(btn);
    }
}

mkoryak is correct.

But, if events are bound to that DOM node using more modern methods (not using onclick), then this method will fail.

If that is what you really want, check out this question, and its accepted answer.

Cheers!

I read your question again.
I'd like to tell you this: don't use onclick, onkeypress and the likes to bind events.

Using better methods like addEventListener() will enable you to:

1. Add more than one event handler to a particular event
2. remove some listeners selectively

Instead of actually using addEventListener(), you could use jQuery wrappers like $('selector').click().

Cheers again!

<td style="white-space: nowrap">

The nowrap attribute I believe is deprecated. The above is the preferred way.

Below is the icon for the 'Show All Files', just for easy reference.

To expand on RiggsFolly’s answer—or for anyone who is facing the same issue but is using Apache 2.2 or below—this format should work well:

Order Deny,Allow
Deny from all
Allow from 127.0.0.1 ::1
Allow from localhost
Allow from 192.168
Allow from 10
Satisfy Any

For more details on the format changes for Apache 2.4, the official Upgrading to 2.2 from 2.4 page is pretty clear & concise. Key point being:

The old access control idioms should be replaced by the new authentication mechanisms, although for compatibility with old configurations, the new module mod_access_compat is provided.

Which means, system admins around the world don’t necessarily have to panic about changing Apache 2.2 configs to be 2.4 compliant just yet.

If you asked this question because you're using mkcert then the trick is that the .pem file is the cert and the -key.pem file is the key.

(You don't need to convert, just run mkcert yourdomain.dev otherdomain.dev )

I've found a great example using javax.websocket here:

http://www.programmingforliving.com/2013/08/jsr-356-java-api-for-websocket-client-api.html

Here the code based on the example linked above:

TestApp.java:

package testapp;

import java.net.URI;
import java.net.URISyntaxException;

public class TestApp {

    public static void main(String[] args) {
        try {
            // open websocket
            final WebsocketClientEndpoint clientEndPoint = new WebsocketClientEndpoint(new URI("wss://real.okcoin.cn:10440/websocket/okcoinapi"));

            // add listener
            clientEndPoint.addMessageHandler(new WebsocketClientEndpoint.MessageHandler() {
                public void handleMessage(String message) {
                    System.out.println(message);
                }
            });

            // send message to websocket
            clientEndPoint.sendMessage("{'event':'addChannel','channel':'ok_btccny_ticker'}");

            // wait 5 seconds for messages from websocket
            Thread.sleep(5000);

        } catch (InterruptedException ex) {
            System.err.println("InterruptedException exception: " + ex.getMessage());
        } catch (URISyntaxException ex) {
            System.err.println("URISyntaxException exception: " + ex.getMessage());
        }
    }
}

WebsocketClientEndpoint.java:

package testapp;

import java.net.URI;
import javax.websocket.ClientEndpoint;
import javax.websocket.CloseReason;
import javax.websocket.ContainerProvider;
import javax.websocket.OnClose;
import javax.websocket.OnMessage;
import javax.websocket.OnOpen;
import javax.websocket.Session;
import javax.websocket.WebSocketContainer;

/**
 * ChatServer Client
 *
 * @author Jiji_Sasidharan
 */
@ClientEndpoint
public class WebsocketClientEndpoint {

    Session userSession = null;
    private MessageHandler messageHandler;

    public WebsocketClientEndpoint(URI endpointURI) {
        try {
            WebSocketContainer container = ContainerProvider.getWebSocketContainer();
            container.connectToServer(this, endpointURI);
        } catch (Exception e) {
            throw new RuntimeException(e);
        }
    }

    /**
     * Callback hook for Connection open events.
     *
     * @param userSession the userSession which is opened.
     */
    @OnOpen
    public void onOpen(Session userSession) {
        System.out.println("opening websocket");
        this.userSession = userSession;
    }

    /**
     * Callback hook for Connection close events.
     *
     * @param userSession the userSession which is getting closed.
     * @param reason the reason for connection close
     */
    @OnClose
    public void onClose(Session userSession, CloseReason reason) {
        System.out.println("closing websocket");
        this.userSession = null;
    }

    /**
     * Callback hook for Message Events. This method will be invoked when a client send a message.
     *
     * @param message The text message
     */
    @OnMessage
    public void onMessage(String message) {
        if (this.messageHandler != null) {
            this.messageHandler.handleMessage(message);
        }
    }

    /**
     * register message handler
     *
     * @param msgHandler
     */
    public void addMessageHandler(MessageHandler msgHandler) {
        this.messageHandler = msgHandler;
    }

    /**
     * Send a message.
     *
     * @param message
     */
    public void sendMessage(String message) {
        this.userSession.getAsyncRemote().sendText(message);
    }

    /**
     * Message handler.
     *
     * @author Jiji_Sasidharan
     */
    public static interface MessageHandler {

        public void handleMessage(String message);
    }
}

You can try this. its working for me 'name' is a property in arr.

repeat="item in (tagWordOptions | filter:{ name: $select.search } ) track by $index

For Ansible 2.x:

- name: template test
  template: 
    src: myTemplateFile
    dest: result1
  vars:
    myTemplateVariable: File1

- name: template test
  template: 
    src: myTemplateFile
    dest: result2
  vars:
    myTemplateVariable: File2

For Ansible 1.x:

Unfortunately the template module does not support passing variables to it, which can be used inside the template. There was a feature request but it was rejected.

I can think of two workarounds:

1. Include

The include statement supports passing variables. So you could have your template task inside an extra file and include it twice with appropriate parameters:

my_include.yml:

- name: template test
  template: 
        src=myTemplateFile
        dest=destination

main.yml:

- include: my_include.yml destination=result1 myTemplateVariable=File1

- include: my_include.yml destination=result2 myTemplateVariable=File2

2. Re-define myTemplateVariable

Another way would be to simply re-define myTemplateVariable right before every template task.

- set_fact:
     myTemplateVariable: File1

- name: template test 1
  template: 
        src=myTemplateFile
        dest=result1

- set_fact:
     myTemplateVariable: File2

- name: template test 2
  template: 
        src=myTemplateFile
        dest=result2

If you're using lodash and in the mood for a too-cute-for-its-own-good one-liner:

_.map(_.words('123, 124, 234,252'), _.add.bind(1, 1));

It's surprisingly robust thanks to lodash's powerful parsing capabilities.

If you want one that will also clean non-digit characters out of the string (and is easier to follow...and not quite so cutesy):

_.chain('123, 124, 234,252, n301')
   .replace(/[^\d,]/g, '')
   .words()
   .map(_.partial(_.add, 1))
   .value();

2017 edit:

I no longer recommend my previous solution. Besides being overkill and already easy to do without a third-party library, it makes use of _.chain, which has a variety of issues. Here's the solution I would now recommend:

const str = '123, 124, 234,252';
const arr = str.split(',').map(n => parseInt(n, 10) + 1);

My old answer is still correct, so I'll leave it for the record, but there's no need to use it nowadays.

Assuming a forward-compatible context in OpenGL 3 and up, you can either use glPolygonMode as mentioned before, but note that lines with thickness more than 1px are now deprecated. So while you can draw triangles as wire-frame, they need to be very thin. In OpenGL ES, you can use GL_LINES with the same limitation.

In OpenGL it is possible to use geometry shaders to take incoming triangles, disassemble them and send them for rasterization as quads (pairs of triangles really) emulating thick lines. Pretty simple, really, except that geometry shaders are notorious for poor performance scaling.

What you can do instead, and what will also work in OpenGL ES is to employ fragment shader. Think of applying a texture of wire-frame triangle to the triangle. Except that no texture is needed, it can be generated procedurally. But enough talk, let's code. Fragment shader:

in vec3 v_barycentric; // barycentric coordinate inside the triangle
uniform float f_thickness; // thickness of the rendered lines

void main()
{
    float f_closest_edge = min(v_barycentric.x,
        min(v_barycentric.y, v_barycentric.z)); // see to which edge this pixel is the closest
    float f_width = fwidth(f_closest_edge); // calculate derivative (divide f_thickness by this to have the line width constant in screen-space)
    float f_alpha = smoothstep(f_thickness, f_thickness + f_width, f_closest_edge); // calculate alpha
    gl_FragColor = vec4(vec3(.0), f_alpha);
}

And vertex shader:

in vec4 v_pos; // position of the vertices
in vec3 v_bc; // barycentric coordinate inside the triangle

out vec3 v_barycentric; // barycentric coordinate inside the triangle

uniform mat4 t_mvp; // modeview-projection matrix

void main()
{
    gl_Position = t_mvp * v_pos;
    v_barycentric = v_bc; // just pass it on
}

Here, the barycentric coordinates are simply (1, 0, 0), (0, 1, 0) and (0, 0, 1) for the three triangle vertices (the order does not really matter, which makes packing into triangle strips potentially easier).

The obvious disadvantage of this approach is that it will eat some texture coordinates and you need to modify your vertex array. Could be solved with a very simple geometry shader but I'd still suspect it will be slower than just feeding the GPU with more data.

I have been busy with a similar problem, and I'm quite puzzled by the results. I was calculating x?³/² for Newtonian gravitation in an n-bodies situation (acceleration undergone from another body of mass M situated at a distance vector d) : a = M G d*(d²)?³/² (where d² is the dot (scalar) product of d by itself) , and I thought calculating M*G*pow(d2, -1.5) would be simpler than M*G/d2/sqrt(d2)

The trick is that it is true for small systems, but as systems grow in size, M*G/d2/sqrt(d2) becomes more efficient and I don't understand why the size of the system impacts this result, because repeating the operation on different data does not. It is as if there were possible optimizations as the system grow, but which are not possible with pow

In some cases, I just convert it into ENTITIES:

                        // i.e.,  $x= ABC\DEFGH'IJKL
$x = str_ireplace("'",  "'", $x);
$x = str_ireplace("\\", "\", $x);
$x = str_ireplace('"',  """, $x);

On the HTML page, the visual output is the same:

ABC\DEFGH'IJKL

However, it is sanitized in source.

Yes it is correct in Java there are several steps to make an array of objects:

1. Declaring and then Instantiating (Create memory to store '4' objects):

   A[ ] arr = new A[4];
   

2. Initializing the Objects (In this case you can Initialize 4 objects of class A)

   arr[0] = new A();
   arr[1] = new A();
   arr[2] = new A();
   arr[3] = new A();
   

   or

   for( int i=0; i<4; i++ )
     arr[i] = new A();
   

Now you can start calling existing methods from the objects you just made etc.

For example:

  int x = arr[1].getNumber();

or

  arr[1].setNumber(x);

Sorry, I don't know how to use LaTeX syntax on stackoverflow..

UTF-8 and UCS-2/UTF-16 can be distinguished reasonably easily via a byte order mark at the start of the file. If this exists then it's a pretty good bet that the file is in that encoding - but it's not a dead certainty. You may well also find that the file is in one of those encodings, but doesn't have a byte order mark.

I don't know much about ISO-8859-2, but I wouldn't be surprised if almost every file is a valid text file in that encoding. The best you'll be able to do is check it heuristically. Indeed, the Wikipedia page talking about it would suggest that only byte 0x7f is invalid.

There's no idea of reading a file "as it is" and yet getting text out - a file is a sequence of bytes, so you have to apply a character encoding in order to decode those bytes into characters.

Source by stackoverflow